| /* |
| * =========================================================================== |
| * Common subroutines and data |
| * =========================================================================== |
| */ |
| |
| .text |
| .align 2 |
| |
| /* |
| * We've detected a condition that will result in an exception, but the exception |
| * has not yet been thrown. Just bail out to the reference interpreter to deal with it. |
| * TUNING: for consistency, we may want to just go ahead and handle these here. |
| */ |
| common_errDivideByZero: |
| EXPORT_PC |
| #if MTERP_LOGGING |
| movq rSELF, OUT_ARG0 |
| leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1 |
| call SYMBOL(MterpLogDivideByZeroException) |
| #endif |
| jmp MterpCommonFallback |
| |
| common_errArrayIndex: |
| EXPORT_PC |
| #if MTERP_LOGGING |
| movq rSELF, OUT_ARG0 |
| leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1 |
| call SYMBOL(MterpLogArrayIndexException) |
| #endif |
| jmp MterpCommonFallback |
| |
| common_errNegativeArraySize: |
| EXPORT_PC |
| #if MTERP_LOGGING |
| movq rSELF, OUT_ARG0 |
| leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1 |
| call SYMBOL(MterpLogNegativeArraySizeException) |
| #endif |
| jmp MterpCommonFallback |
| |
| common_errNoSuchMethod: |
| EXPORT_PC |
| #if MTERP_LOGGING |
| movq rSELF, OUT_ARG0 |
| leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1 |
| call SYMBOL(MterpLogNoSuchMethodException) |
| #endif |
| jmp MterpCommonFallback |
| |
| common_errNullObject: |
| EXPORT_PC |
| #if MTERP_LOGGING |
| movq rSELF, OUT_ARG0 |
| leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1 |
| call SYMBOL(MterpLogNullObjectException) |
| #endif |
| jmp MterpCommonFallback |
| |
| common_exceptionThrown: |
| EXPORT_PC |
| #if MTERP_LOGGING |
| movq rSELF, OUT_ARG0 |
| leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1 |
| call SYMBOL(MterpLogExceptionThrownException) |
| #endif |
| jmp MterpCommonFallback |
| |
| MterpSuspendFallback: |
| EXPORT_PC |
| #if MTERP_LOGGING |
| movq rSELF, OUT_ARG0 |
| leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1 |
| movl THREAD_FLAGS_OFFSET(OUT_ARG0), OUT_32_ARG2 |
| call SYMBOL(MterpLogSuspendFallback) |
| #endif |
| jmp MterpCommonFallback |
| |
| /* |
| * If we're here, something is out of the ordinary. If there is a pending |
| * exception, handle it. Otherwise, roll back and retry with the reference |
| * interpreter. |
| */ |
| MterpPossibleException: |
| movq rSELF, %rcx |
| cmpq $$0, THREAD_EXCEPTION_OFFSET(%rcx) |
| jz MterpFallback |
| /* intentional fallthrough - handle pending exception. */ |
| |
| /* |
| * On return from a runtime helper routine, we've found a pending exception. |
| * Can we handle it here - or need to bail out to caller? |
| * |
| */ |
| MterpException: |
| movq rSELF, OUT_ARG0 |
| leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1 |
| call SYMBOL(MterpHandleException) |
| testb %al, %al |
| jz MterpExceptionReturn |
| movq OFF_FP_CODE_ITEM(rFP), %rax |
| mov OFF_FP_DEX_PC(rFP), %ecx |
| leaq CODEITEM_INSNS_OFFSET(%rax), rPC |
| leaq (rPC, %rcx, 2), rPC |
| movq rPC, OFF_FP_DEX_PC_PTR(rFP) |
| /* Do we need to switch interpreters? */ |
| call SYMBOL(MterpShouldSwitchInterpreters) |
| testb %al, %al |
| jnz MterpFallback |
| /* resume execution at catch block */ |
| REFRESH_IBASE |
| FETCH_INST |
| GOTO_NEXT |
| /* NOTE: no fallthrough */ |
| |
| /* |
| * Common handling for branches with support for Jit profiling. |
| * On entry: |
| * rINST <= signed offset |
| * rPROFILE <= signed hotness countdown (expanded to 32 bits) |
| * condition bits <= set to establish sign of offset (use "NoFlags" entry if not) |
| * |
| * We have quite a few different cases for branch profiling, OSR detection and |
| * suspend check support here. |
| * |
| * Taken backward branches: |
| * If profiling active, do hotness countdown and report if we hit zero. |
| * If in osr check mode, see if our target is a compiled loop header entry and do OSR if so. |
| * Is there a pending suspend request? If so, suspend. |
| * |
| * Taken forward branches and not-taken backward branches: |
| * If in osr check mode, see if our target is a compiled loop header entry and do OSR if so. |
| * |
| * Our most common case is expected to be a taken backward branch with active jit profiling, |
| * but no full OSR check and no pending suspend request. |
| * Next most common case is not-taken branch with no full OSR check. |
| * |
| */ |
| MterpCommonTakenBranch: |
| jg .L_forward_branch # don't add forward branches to hotness |
| /* |
| * We need to subtract 1 from positive values and we should not see 0 here, |
| * so we may use the result of the comparison with -1. |
| */ |
| #if JIT_CHECK_OSR != -1 |
| # error "JIT_CHECK_OSR must be -1." |
| #endif |
| cmpl $$JIT_CHECK_OSR, rPROFILE |
| je .L_osr_check |
| decl rPROFILE |
| je .L_add_batch # counted down to zero - report |
| .L_resume_backward_branch: |
| movq rSELF, %rax |
| testl $$(THREAD_SUSPEND_REQUEST | THREAD_CHECKPOINT_REQUEST), THREAD_FLAGS_OFFSET(%rax) |
| REFRESH_IBASE |
| leaq (rPC, rINSTq, 2), rPC |
| FETCH_INST |
| jnz .L_suspend_request_pending |
| GOTO_NEXT |
| |
| .L_suspend_request_pending: |
| EXPORT_PC |
| movq rSELF, OUT_ARG0 |
| call SYMBOL(MterpSuspendCheck) # (self) |
| testb %al, %al |
| jnz MterpFallback |
| REFRESH_IBASE # might have changed during suspend |
| GOTO_NEXT |
| |
| .L_no_count_backwards: |
| cmpl $$JIT_CHECK_OSR, rPROFILE # possible OSR re-entry? |
| jne .L_resume_backward_branch |
| .L_osr_check: |
| EXPORT_PC |
| movq rSELF, OUT_ARG0 |
| leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1 |
| movq rINSTq, OUT_ARG2 |
| call SYMBOL(MterpMaybeDoOnStackReplacement) # (self, shadow_frame, offset) |
| testb %al, %al |
| jz .L_resume_backward_branch |
| jmp MterpOnStackReplacement |
| |
| .L_forward_branch: |
| cmpl $$JIT_CHECK_OSR, rPROFILE # possible OSR re-entry? |
| je .L_check_osr_forward |
| .L_resume_forward_branch: |
| leaq (rPC, rINSTq, 2), rPC |
| FETCH_INST |
| GOTO_NEXT |
| |
| .L_check_osr_forward: |
| EXPORT_PC |
| movq rSELF, OUT_ARG0 |
| leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1 |
| movq rINSTq, OUT_ARG2 |
| call SYMBOL(MterpMaybeDoOnStackReplacement) # (self, shadow_frame, offset) |
| testb %al, %al |
| jz .L_resume_forward_branch |
| jmp MterpOnStackReplacement |
| |
| .L_add_batch: |
| movl rPROFILE, %eax |
| movq OFF_FP_METHOD(rFP), OUT_ARG0 |
| leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1 |
| movw %ax, OFF_FP_COUNTDOWN_OFFSET(rFP) |
| movq rSELF, OUT_ARG2 |
| call SYMBOL(MterpAddHotnessBatch) # (method, shadow_frame, self) |
| movswl %ax, rPROFILE |
| jmp .L_no_count_backwards |
| |
| /* |
| * Entered from the conditional branch handlers when OSR check request active on |
| * not-taken path. All Dalvik not-taken conditional branch offsets are 2. |
| */ |
| .L_check_not_taken_osr: |
| movq rSELF, OUT_ARG0 |
| leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1 |
| movl $$2, OUT_32_ARG2 |
| call SYMBOL(MterpMaybeDoOnStackReplacement) # (self, shadow_frame, offset) |
| testb %al, %al |
| jnz MterpOnStackReplacement |
| ADVANCE_PC_FETCH_AND_GOTO_NEXT 2 |
| |
| /* |
| * On-stack replacement has happened, and now we've returned from the compiled method. |
| */ |
| MterpOnStackReplacement: |
| #if MTERP_LOGGING |
| movq rSELF, OUT_ARG0 |
| leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1 |
| movl rINST, OUT_32_ARG2 |
| call SYMBOL(MterpLogOSR) |
| #endif |
| movl $$1, %eax |
| jmp MterpDone |
| |
| /* |
| * Bail out to reference interpreter. |
| */ |
| MterpFallback: |
| EXPORT_PC |
| #if MTERP_LOGGING |
| movq rSELF, OUT_ARG0 |
| leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1 |
| call SYMBOL(MterpLogFallback) |
| #endif |
| MterpCommonFallback: |
| xorl %eax, %eax |
| jmp MterpDone |
| |
| /* |
| * On entry: |
| * uint32_t* rFP (should still be live, pointer to base of vregs) |
| */ |
| MterpExceptionReturn: |
| movl $$1, %eax |
| jmp MterpDone |
| MterpReturn: |
| movq OFF_FP_RESULT_REGISTER(rFP), %rdx |
| movq %rax, (%rdx) |
| movl $$1, %eax |
| MterpDone: |
| /* |
| * At this point, we expect rPROFILE to be non-zero. If negative, hotness is disabled or we're |
| * checking for OSR. If greater than zero, we might have unreported hotness to register |
| * (the difference between the ending rPROFILE and the cached hotness counter). rPROFILE |
| * should only reach zero immediately after a hotness decrement, and is then reset to either |
| * a negative special state or the new non-zero countdown value. |
| */ |
| testl rPROFILE, rPROFILE |
| jle MRestoreFrame # if > 0, we may have some counts to report. |
| |
| movl %eax, rINST # stash return value |
| /* Report cached hotness counts */ |
| movl rPROFILE, %eax |
| movq OFF_FP_METHOD(rFP), OUT_ARG0 |
| leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1 |
| movw %ax, OFF_FP_COUNTDOWN_OFFSET(rFP) |
| movq rSELF, OUT_ARG2 |
| call SYMBOL(MterpAddHotnessBatch) # (method, shadow_frame, self) |
| movl rINST, %eax # restore return value |
| |
| /* pop up frame */ |
| MRestoreFrame: |
| addq $$FRAME_SIZE, %rsp |
| .cfi_adjust_cfa_offset -FRAME_SIZE |
| |
| /* Restore callee save register */ |
| POP %r15 |
| POP %r14 |
| POP %r13 |
| POP %r12 |
| POP %rbp |
| POP %rbx |
| ret |
| .cfi_endproc |
| SIZE(ExecuteMterpImpl,ExecuteMterpImpl) |