compiler/jit/jit_logger.cc - platform/art - Gitiles

 /*
  * Copyright 2016 The Android Open Source Project
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */

 #include "jit_logger.h"

 #include "arch/instruction_set.h"
 #include "art_method-inl.h"
 #include "base/time_utils.h"
 #include "base/unix_file/fd_file.h"
 #include "jit/jit.h"
 #include "jit/jit_code_cache.h"
 #include "oat_file-inl.h"

 namespace art {
 namespace jit {

 #ifdef ART_TARGET_ANDROID
 static const char* kLogPrefix = "/data/misc/trace";
 #else
 static const char* kLogPrefix = "/tmp";
 #endif

 // File format of perf-PID.map:
 // +---------------------+
 // |ADDR SIZE symbolname1|
 // |ADDR SIZE symbolname2|
 // |...                  |
 // +---------------------+
 void JitLogger::OpenPerfMapLog() {
   std::string pid_str = std::to_string(getpid());
   std::string perf_filename = std::string(kLogPrefix) + "/perf-" + pid_str + ".map";
   perf_file_.reset(OS::CreateEmptyFileWriteOnly(perf_filename.c_str()));
   if (perf_file_ == nullptr) {
     LOG(ERROR) << "Could not create perf file at " << perf_filename <<
       " Are you on a user build? Perf only works on userdebug/eng builds";
   }
 }

 void JitLogger::WritePerfMapLog(const void* ptr, size_t code_size, ArtMethod* method) {
   if (perf_file_ != nullptr) {
     std::string method_name = method->PrettyMethod();

     std::ostringstream stream;
     stream << std::hex
            << reinterpret_cast<uintptr_t>(ptr)
            << " "
            << code_size
            << " "
            << method_name
            << std::endl;
     std::string str = stream.str();
     bool res = perf_file_->WriteFully(str.c_str(), str.size());
     if (!res) {
       LOG(WARNING) << "Failed to write jitted method info in log: write failure.";
     }
   } else {
     LOG(WARNING) << "Failed to write jitted method info in log: log file doesn't exist.";
   }
 }

 void JitLogger::ClosePerfMapLog() {
   if (perf_file_ != nullptr) {
     UNUSED(perf_file_->Flush());
     UNUSED(perf_file_->Close());
   }
 }

 //  File format of jit-PID.jump:
 //
 //  +--------------------------------+
 //  |  PerfJitHeader                 |
 //  +--------------------------------+
 //  |  PerfJitCodeLoad {             | .
 //  |    struct PerfJitBase;         |  .
 //  |    uint32_t process_id_;       |   .
 //  |    uint32_t thread_id_;        |   .
 //  |    uint64_t vma_;              |   .
 //  |    uint64_t code_address_;     |   .
 //  |    uint64_t code_size_;        |   .
 //  |    uint64_t code_id_;          |   .
 //  |  }                             |   .
 //  +-                              -+   .
 //  |  method_name'\0'               |   +--> one jitted method
 //  +-                              -+   .
 //  |  jitted code binary            |   .
 //  |  ...                           |   .
 //  +--------------------------------+   .
 //  |  PerfJitCodeDebugInfo     {    |   .
 //  |    struct PerfJitBase;         |   .
 //  |    uint64_t address_;          |   .
 //  |    uint64_t entry_count_;      |   .
 //  |    struct PerfJitDebugEntry;   |  .
 //  |  }                             | .
 //  +--------------------------------+
 //  |  PerfJitCodeLoad               |
 //     ...
 //
 struct PerfJitHeader {
   uint32_t magic_;            // Characters "JiTD"
   uint32_t version_;          // Header version
   uint32_t size_;             // Total size of header
   uint32_t elf_mach_target_;  // Elf mach target
   uint32_t reserved_;         // Reserved, currently not used
   uint32_t process_id_;       // Process ID of the JIT compiler
   uint64_t time_stamp_;       // Timestamp when the header is generated
   uint64_t flags_;            // Currently the flags are only used for choosing clock for timestamp,
                               // we set it to 0 to tell perf that we use CLOCK_MONOTONIC clock.
   static const uint32_t kMagic = 0x4A695444;  // "JiTD"
   static const uint32_t kVersion = 1;
 };

 // Each record starts with such basic information: event type, total size, and timestamp.
 struct PerfJitBase {
   enum PerfJitEvent {
     // A jitted code load event.
     // In ART JIT, it is used to log a new method is jit compiled and committed to jit-code-cache.
     // Note that such kLoad event supports code cache GC in ART JIT.
     // For every kLoad event recorded in jit-PID.dump and every perf sample recorded in perf.data,
     // each event/sample has time stamp. In case code cache GC happens in ART JIT, and a new
     // jitted method is committed to the same address of a previously deleted method,
     // the time stamp information can help profiler to tell whether this sample belongs to the
     // era of the first jitted method, or does it belong to the period of the second jitted method.
     // JitCodeCache doesn't have to record any event on 'code delete'.
     kLoad = 0,

     // A jitted code move event, i,e. a jitted code moved from one address to another address.
     // It helps profiler to map samples to the right symbol even when the code is moved.
     // In ART JIT, this event can help log such behavior:
     // A jitted method is recorded in previous kLoad event, but due to some reason,
     // it is moved to another address in jit-code-cache.
     kMove = 1,

     // Logs debug line/column information.
     kDebugInfo = 2,

     // Logs JIT VM end of life event.
     kClose = 3
   };
   uint32_t event_;       // Must be one of the events defined in PerfJitEvent.
   uint32_t size_;        // Total size of this event record.
                          // For example, for kLoad event, size of the event record is:
                          // sizeof(PerfJitCodeLoad) + method_name.size() + compiled code size.
   uint64_t time_stamp_;  // Timestamp for the event.
 };

 // Logs a jitted code load event (kLoad).
 // In ART JIT, it is used to log a new method is jit compiled and commited to jit-code-cache.
 struct PerfJitCodeLoad : PerfJitBase {
   uint32_t process_id_;    // Process ID who performs the jit code load.
                            // In ART JIT, it is the pid of the JIT compiler.
   uint32_t thread_id_;     // Thread ID who performs the jit code load.
                            // In ART JIT, it is the tid of the JIT compiler.
   uint64_t vma_;           // Address of the code section. In ART JIT, because code_address_
                            // uses absolute address, this field is 0.
   uint64_t code_address_;  // Address where is jitted code is loaded.
   uint64_t code_size_;     // Size of the jitted code.
   uint64_t code_id_;       // Unique ID for each jitted code.
 };

 // This structure is for source line/column mapping.
 // Currently this feature is not implemented in ART JIT yet.
 struct PerfJitDebugEntry {
   uint64_t address_;      // Code address which maps to the line/column in source.
   uint32_t line_number_;  // Source line number starting at 1.
   uint32_t column_;       // Column discriminator, default 0.
   const char name_[0];    // Followed by null-terminated name or \0xff\0 if same as previous.
 };

 // Logs debug line information (kDebugInfo).
 // This structure is for source line/column mapping.
 // Currently this feature is not implemented in ART JIT yet.
 struct PerfJitCodeDebugInfo : PerfJitBase {
   uint64_t address_;              // Starting code address which the debug info describes.
   uint64_t entry_count_;          // How many instances of PerfJitDebugEntry.
   PerfJitDebugEntry entries_[0];  // Followed by entry_count_ instances of PerfJitDebugEntry.
 };

 static uint32_t GetElfMach() {
 #if defined(__arm__)
   static const uint32_t kElfMachARM = 0x28;
   return kElfMachARM;
 #elif defined(__aarch64__)
   static const uint32_t kElfMachARM64 = 0xB7;
   return kElfMachARM64;
 #elif defined(__i386__)
   static const uint32_t kElfMachIA32 = 0x3;
   return kElfMachIA32;
 #elif defined(__x86_64__)
   static const uint32_t kElfMachX64 = 0x3E;
   return kElfMachX64;
 #else
   UNIMPLEMENTED(WARNING) << "Unsupported architecture in JitLogger";
   return 0;
 #endif
 }

 void JitLogger::OpenMarkerFile() {
   int fd = jit_dump_file_->Fd();
   // The 'perf inject' tool requires that the jit-PID.dump file
   // must have a mmap(PROT_READ|PROT_EXEC) record in perf.data.
   marker_address_ = mmap(nullptr, kPageSize, PROT_READ | PROT_EXEC, MAP_PRIVATE, fd, 0);
   if (marker_address_ == MAP_FAILED) {
     LOG(WARNING) << "Failed to create record in perf.data. JITed code profiling will not work.";
     return;
   }
 }

 void JitLogger::CloseMarkerFile() {
   if (marker_address_ != nullptr) {
     munmap(marker_address_, kPageSize);
   }
 }

 void JitLogger::WriteJitDumpDebugInfo() {
   // In the future, we can add java source file line/column mapping here.
 }

 void JitLogger::WriteJitDumpHeader() {
   PerfJitHeader header;

   std::memset(&header, 0, sizeof(header));
   header.magic_ = PerfJitHeader::kMagic;
   header.version_ = PerfJitHeader::kVersion;
   header.size_ = sizeof(header);
   header.elf_mach_target_ = GetElfMach();
   header.process_id_ = static_cast<uint32_t>(getpid());
   header.time_stamp_ = art::NanoTime();  // CLOCK_MONOTONIC clock is required.
   header.flags_ = 0;

   bool res = jit_dump_file_->WriteFully(reinterpret_cast<const char*>(&header), sizeof(header));
   if (!res) {
     LOG(WARNING) << "Failed to write profiling log. The 'perf inject' tool will not work.";
   }
 }

 void JitLogger::OpenJitDumpLog() {
   std::string pid_str = std::to_string(getpid());
   std::string jitdump_filename = std::string(kLogPrefix) + "/jit-" + pid_str + ".dump";

   jit_dump_file_.reset(OS::CreateEmptyFile(jitdump_filename.c_str()));
   if (jit_dump_file_ == nullptr) {
     LOG(ERROR) << "Could not create jit dump file at " << jitdump_filename <<
       " Are you on a user build? Perf only works on userdebug/eng builds";
     return;
   }

   OpenMarkerFile();

   // Continue to write jit-PID.dump file even above OpenMarkerFile() fails.
   // Even if that means 'perf inject' tool cannot work, developers can still use other tools
   // to map the samples in perf.data to the information (symbol,address,code) recorded
   // in the jit-PID.dump file, and still proceed the jitted code analysis.
   WriteJitDumpHeader();
 }

 void JitLogger::WriteJitDumpLog(const void* ptr, size_t code_size, ArtMethod* method) {
   if (jit_dump_file_ != nullptr) {
     std::string method_name = method->PrettyMethod();

     PerfJitCodeLoad jit_code;
     std::memset(&jit_code, 0, sizeof(jit_code));
     jit_code.event_ = PerfJitCodeLoad::kLoad;
     jit_code.size_ = sizeof(jit_code) + method_name.size() + 1 + code_size;
     jit_code.time_stamp_ = art::NanoTime();    // CLOCK_MONOTONIC clock is required.
     jit_code.process_id_ = static_cast<uint32_t>(getpid());
     jit_code.thread_id_ = static_cast<uint32_t>(art::GetTid());
     jit_code.vma_ = 0x0;
     jit_code.code_address_ = reinterpret_cast<uint64_t>(ptr);
     jit_code.code_size_ = code_size;
     jit_code.code_id_ = code_index_++;

     // Write one complete jitted method info, including:
     // - PerfJitCodeLoad structure
     // - Method name
     // - Complete generated code of this method
     //
     // Use UNUSED() here to avoid compiler warnings.
     UNUSED(jit_dump_file_->WriteFully(reinterpret_cast<const char*>(&jit_code), sizeof(jit_code)));
     UNUSED(jit_dump_file_->WriteFully(method_name.c_str(), method_name.size() + 1));
     UNUSED(jit_dump_file_->WriteFully(ptr, code_size));

     WriteJitDumpDebugInfo();
   }
 }

 void JitLogger::CloseJitDumpLog() {
   if (jit_dump_file_ != nullptr) {
     CloseMarkerFile();
     UNUSED(jit_dump_file_->Flush());
     UNUSED(jit_dump_file_->Close());
   }
 }

 }  // namespace jit
 }  // namespace art
	/*
	* Copyright 2016 The Android Open Source Project
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	#include "jit_logger.h"

	#include "arch/instruction_set.h"
	#include "art_method-inl.h"
	#include "base/time_utils.h"
	#include "base/unix_file/fd_file.h"
	#include "jit/jit.h"
	#include "jit/jit_code_cache.h"
	#include "oat_file-inl.h"

	namespace art {
	namespace jit {

	#ifdef ART_TARGET_ANDROID
	static const char* kLogPrefix = "/data/misc/trace";
	#else
	static const char* kLogPrefix = "/tmp";
	#endif

	// File format of perf-PID.map:
	// +---------------------+
	// \|ADDR SIZE symbolname1\|
	// \|ADDR SIZE symbolname2\|
	// \|... \|
	// +---------------------+
	void JitLogger::OpenPerfMapLog() {
	std::string pid_str = std::to_string(getpid());
	std::string perf_filename = std::string(kLogPrefix) + "/perf-" + pid_str + ".map";
	perf_file_.reset(OS::CreateEmptyFileWriteOnly(perf_filename.c_str()));
	if (perf_file_ == nullptr) {
	LOG(ERROR) << "Could not create perf file at " << perf_filename <<
	" Are you on a user build? Perf only works on userdebug/eng builds";
	}
	}

	void JitLogger::WritePerfMapLog(const void* ptr, size_t code_size, ArtMethod* method) {
	if (perf_file_ != nullptr) {
	std::string method_name = method->PrettyMethod();

	std::ostringstream stream;
	stream << std::hex
	<< reinterpret_cast<uintptr_t>(ptr)
	<< " "
	<< code_size
	<< " "
	<< method_name
	<< std::endl;
	std::string str = stream.str();
	bool res = perf_file_->WriteFully(str.c_str(), str.size());
	if (!res) {
	LOG(WARNING) << "Failed to write jitted method info in log: write failure.";
	}
	} else {
	LOG(WARNING) << "Failed to write jitted method info in log: log file doesn't exist.";
	}
	}

	void JitLogger::ClosePerfMapLog() {
	if (perf_file_ != nullptr) {
	UNUSED(perf_file_->Flush());
	UNUSED(perf_file_->Close());
	}
	}

	// File format of jit-PID.jump:
	//
	// +--------------------------------+
	// \| PerfJitHeader \|
	// +--------------------------------+
	// \| PerfJitCodeLoad { \| .
	// \| struct PerfJitBase; \| .
	// \| uint32_t process_id_; \| .
	// \| uint32_t thread_id_; \| .
	// \| uint64_t vma_; \| .
	// \| uint64_t code_address_; \| .
	// \| uint64_t code_size_; \| .
	// \| uint64_t code_id_; \| .
	// \| } \| .
	// +- -+ .
	// \| method_name'\0' \| +--> one jitted method
	// +- -+ .
	// \| jitted code binary \| .
	// \| ... \| .
	// +--------------------------------+ .
	// \| PerfJitCodeDebugInfo { \| .
	// \| struct PerfJitBase; \| .
	// \| uint64_t address_; \| .
	// \| uint64_t entry_count_; \| .
	// \| struct PerfJitDebugEntry; \| .
	// \| } \| .
	// +--------------------------------+
	// \| PerfJitCodeLoad \|
	// ...
	//
	struct PerfJitHeader {
	uint32_t magic_; // Characters "JiTD"
	uint32_t version_; // Header version
	uint32_t size_; // Total size of header
	uint32_t elf_mach_target_; // Elf mach target
	uint32_t reserved_; // Reserved, currently not used
	uint32_t process_id_; // Process ID of the JIT compiler
	uint64_t time_stamp_; // Timestamp when the header is generated
	uint64_t flags_; // Currently the flags are only used for choosing clock for timestamp,
	// we set it to 0 to tell perf that we use CLOCK_MONOTONIC clock.
	static const uint32_t kMagic = 0x4A695444; // "JiTD"
	static const uint32_t kVersion = 1;
	};

	// Each record starts with such basic information: event type, total size, and timestamp.
	struct PerfJitBase {
	enum PerfJitEvent {
	// A jitted code load event.
	// In ART JIT, it is used to log a new method is jit compiled and committed to jit-code-cache.
	// Note that such kLoad event supports code cache GC in ART JIT.
	// For every kLoad event recorded in jit-PID.dump and every perf sample recorded in perf.data,
	// each event/sample has time stamp. In case code cache GC happens in ART JIT, and a new
	// jitted method is committed to the same address of a previously deleted method,
	// the time stamp information can help profiler to tell whether this sample belongs to the
	// era of the first jitted method, or does it belong to the period of the second jitted method.
	// JitCodeCache doesn't have to record any event on 'code delete'.
	kLoad = 0,

	// A jitted code move event, i,e. a jitted code moved from one address to another address.
	// It helps profiler to map samples to the right symbol even when the code is moved.
	// In ART JIT, this event can help log such behavior:
	// A jitted method is recorded in previous kLoad event, but due to some reason,
	// it is moved to another address in jit-code-cache.
	kMove = 1,

	// Logs debug line/column information.
	kDebugInfo = 2,

	// Logs JIT VM end of life event.
	kClose = 3
	};
	uint32_t event_; // Must be one of the events defined in PerfJitEvent.
	uint32_t size_; // Total size of this event record.
	// For example, for kLoad event, size of the event record is:
	// sizeof(PerfJitCodeLoad) + method_name.size() + compiled code size.
	uint64_t time_stamp_; // Timestamp for the event.
	};

	// Logs a jitted code load event (kLoad).
	// In ART JIT, it is used to log a new method is jit compiled and commited to jit-code-cache.
	struct PerfJitCodeLoad : PerfJitBase {
	uint32_t process_id_; // Process ID who performs the jit code load.
	// In ART JIT, it is the pid of the JIT compiler.
	uint32_t thread_id_; // Thread ID who performs the jit code load.
	// In ART JIT, it is the tid of the JIT compiler.
	uint64_t vma_; // Address of the code section. In ART JIT, because code_address_
	// uses absolute address, this field is 0.
	uint64_t code_address_; // Address where is jitted code is loaded.
	uint64_t code_size_; // Size of the jitted code.
	uint64_t code_id_; // Unique ID for each jitted code.
	};

	// This structure is for source line/column mapping.
	// Currently this feature is not implemented in ART JIT yet.
	struct PerfJitDebugEntry {
	uint64_t address_; // Code address which maps to the line/column in source.
	uint32_t line_number_; // Source line number starting at 1.
	uint32_t column_; // Column discriminator, default 0.
	const char name_[0]; // Followed by null-terminated name or \0xff\0 if same as previous.
	};

	// Logs debug line information (kDebugInfo).
	// This structure is for source line/column mapping.
	// Currently this feature is not implemented in ART JIT yet.
	struct PerfJitCodeDebugInfo : PerfJitBase {
	uint64_t address_; // Starting code address which the debug info describes.
	uint64_t entry_count_; // How many instances of PerfJitDebugEntry.
	PerfJitDebugEntry entries_[0]; // Followed by entry_count_ instances of PerfJitDebugEntry.
	};

	static uint32_t GetElfMach() {
	#if defined(__arm__)
	static const uint32_t kElfMachARM = 0x28;
	return kElfMachARM;
	#elif defined(__aarch64__)
	static const uint32_t kElfMachARM64 = 0xB7;
	return kElfMachARM64;
	#elif defined(__i386__)
	static const uint32_t kElfMachIA32 = 0x3;
	return kElfMachIA32;
	#elif defined(__x86_64__)
	static const uint32_t kElfMachX64 = 0x3E;
	return kElfMachX64;
	#else
	UNIMPLEMENTED(WARNING) << "Unsupported architecture in JitLogger";
	return 0;
	#endif
	}

	void JitLogger::OpenMarkerFile() {
	int fd = jit_dump_file_->Fd();
	// The 'perf inject' tool requires that the jit-PID.dump file
	// must have a mmap(PROT_READ\|PROT_EXEC) record in perf.data.
	marker_address_ = mmap(nullptr, kPageSize, PROT_READ \| PROT_EXEC, MAP_PRIVATE, fd, 0);
	if (marker_address_ == MAP_FAILED) {
	LOG(WARNING) << "Failed to create record in perf.data. JITed code profiling will not work.";
	return;
	}
	}

	void JitLogger::CloseMarkerFile() {
	if (marker_address_ != nullptr) {
	munmap(marker_address_, kPageSize);
	}
	}

	void JitLogger::WriteJitDumpDebugInfo() {
	// In the future, we can add java source file line/column mapping here.
	}

	void JitLogger::WriteJitDumpHeader() {
	PerfJitHeader header;

	std::memset(&header, 0, sizeof(header));
	header.magic_ = PerfJitHeader::kMagic;
	header.version_ = PerfJitHeader::kVersion;
	header.size_ = sizeof(header);
	header.elf_mach_target_ = GetElfMach();
	header.process_id_ = static_cast<uint32_t>(getpid());
	header.time_stamp_ = art::NanoTime(); // CLOCK_MONOTONIC clock is required.
	header.flags_ = 0;

	bool res = jit_dump_file_->WriteFully(reinterpret_cast<const char*>(&header), sizeof(header));
	if (!res) {
	LOG(WARNING) << "Failed to write profiling log. The 'perf inject' tool will not work.";
	}
	}

	void JitLogger::OpenJitDumpLog() {
	std::string pid_str = std::to_string(getpid());
	std::string jitdump_filename = std::string(kLogPrefix) + "/jit-" + pid_str + ".dump";

	jit_dump_file_.reset(OS::CreateEmptyFile(jitdump_filename.c_str()));
	if (jit_dump_file_ == nullptr) {
	LOG(ERROR) << "Could not create jit dump file at " << jitdump_filename <<
	" Are you on a user build? Perf only works on userdebug/eng builds";
	return;
	}

	OpenMarkerFile();

	// Continue to write jit-PID.dump file even above OpenMarkerFile() fails.
	// Even if that means 'perf inject' tool cannot work, developers can still use other tools
	// to map the samples in perf.data to the information (symbol,address,code) recorded
	// in the jit-PID.dump file, and still proceed the jitted code analysis.
	WriteJitDumpHeader();
	}

	void JitLogger::WriteJitDumpLog(const void* ptr, size_t code_size, ArtMethod* method) {
	if (jit_dump_file_ != nullptr) {
	std::string method_name = method->PrettyMethod();

	PerfJitCodeLoad jit_code;
	std::memset(&jit_code, 0, sizeof(jit_code));
	jit_code.event_ = PerfJitCodeLoad::kLoad;
	jit_code.size_ = sizeof(jit_code) + method_name.size() + 1 + code_size;
	jit_code.time_stamp_ = art::NanoTime(); // CLOCK_MONOTONIC clock is required.
	jit_code.process_id_ = static_cast<uint32_t>(getpid());
	jit_code.thread_id_ = static_cast<uint32_t>(art::GetTid());
	jit_code.vma_ = 0x0;
	jit_code.code_address_ = reinterpret_cast<uint64_t>(ptr);
	jit_code.code_size_ = code_size;
	jit_code.code_id_ = code_index_++;

	// Write one complete jitted method info, including:
	// - PerfJitCodeLoad structure
	// - Method name
	// - Complete generated code of this method
	//
	// Use UNUSED() here to avoid compiler warnings.
	UNUSED(jit_dump_file_->WriteFully(reinterpret_cast<const char*>(&jit_code), sizeof(jit_code)));
	UNUSED(jit_dump_file_->WriteFully(method_name.c_str(), method_name.size() + 1));
	UNUSED(jit_dump_file_->WriteFully(ptr, code_size));

	WriteJitDumpDebugInfo();
	}
	}

	void JitLogger::CloseJitDumpLog() {
	if (jit_dump_file_ != nullptr) {
	CloseMarkerFile();
	UNUSED(jit_dump_file_->Flush());
	UNUSED(jit_dump_file_->Close());
	}
	}

	} // namespace jit
	} // namespace art