| /* |
| * Copyright (C) 2011 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #ifndef ART_RUNTIME_THREAD_INL_H_ |
| #define ART_RUNTIME_THREAD_INL_H_ |
| |
| #include "thread.h" |
| |
| #include "arch/instruction_set.h" |
| #include "base/aborting.h" |
| #include "base/casts.h" |
| #include "base/mutex-inl.h" |
| #include "base/time_utils.h" |
| #include "jni/jni_env_ext.h" |
| #include "managed_stack-inl.h" |
| #include "obj_ptr.h" |
| #include "suspend_reason.h" |
| #include "thread-current-inl.h" |
| #include "thread_pool.h" |
| |
| namespace art { |
| |
| // Quickly access the current thread from a JNIEnv. |
| static inline Thread* ThreadForEnv(JNIEnv* env) { |
| JNIEnvExt* full_env(down_cast<JNIEnvExt*>(env)); |
| return full_env->GetSelf(); |
| } |
| |
| inline void Thread::AllowThreadSuspension() { |
| DCHECK_EQ(Thread::Current(), this); |
| if (UNLIKELY(TestAllFlags())) { |
| CheckSuspend(); |
| } |
| // Invalidate the current thread's object pointers (ObjPtr) to catch possible moving GC bugs due |
| // to missing handles. |
| PoisonObjectPointers(); |
| } |
| |
| inline void Thread::CheckSuspend() { |
| DCHECK_EQ(Thread::Current(), this); |
| for (;;) { |
| if (ReadFlag(kCheckpointRequest)) { |
| RunCheckpointFunction(); |
| } else if (ReadFlag(kSuspendRequest)) { |
| FullSuspendCheck(); |
| } else if (ReadFlag(kEmptyCheckpointRequest)) { |
| RunEmptyCheckpoint(); |
| } else { |
| break; |
| } |
| } |
| } |
| |
| inline void Thread::CheckEmptyCheckpointFromWeakRefAccess(BaseMutex* cond_var_mutex) { |
| Thread* self = Thread::Current(); |
| DCHECK_EQ(self, this); |
| for (;;) { |
| if (ReadFlag(kEmptyCheckpointRequest)) { |
| RunEmptyCheckpoint(); |
| // Check we hold only an expected mutex when accessing weak ref. |
| if (kIsDebugBuild) { |
| for (int i = kLockLevelCount - 1; i >= 0; --i) { |
| BaseMutex* held_mutex = self->GetHeldMutex(static_cast<LockLevel>(i)); |
| if (held_mutex != nullptr && |
| held_mutex != Locks::mutator_lock_ && |
| held_mutex != cond_var_mutex) { |
| CHECK(Locks::IsExpectedOnWeakRefAccess(held_mutex)) |
| << "Holding unexpected mutex " << held_mutex->GetName() |
| << " when accessing weak ref"; |
| } |
| } |
| } |
| } else { |
| break; |
| } |
| } |
| } |
| |
| inline void Thread::CheckEmptyCheckpointFromMutex() { |
| DCHECK_EQ(Thread::Current(), this); |
| for (;;) { |
| if (ReadFlag(kEmptyCheckpointRequest)) { |
| RunEmptyCheckpoint(); |
| } else { |
| break; |
| } |
| } |
| } |
| |
| inline ThreadState Thread::SetState(ThreadState new_state) { |
| // Should only be used to change between suspended states. |
| // Cannot use this code to change into or from Runnable as changing to Runnable should |
| // fail if old_state_and_flags.suspend_request is true and changing from Runnable might |
| // miss passing an active suspend barrier. |
| DCHECK_NE(new_state, kRunnable); |
| if (kIsDebugBuild && this != Thread::Current()) { |
| std::string name; |
| GetThreadName(name); |
| LOG(FATAL) << "Thread \"" << name << "\"(" << this << " != Thread::Current()=" |
| << Thread::Current() << ") changing state to " << new_state; |
| } |
| union StateAndFlags old_state_and_flags; |
| old_state_and_flags.as_int = tls32_.state_and_flags.as_int; |
| CHECK_NE(old_state_and_flags.as_struct.state, kRunnable) << new_state << " " << *this << " " |
| << *Thread::Current(); |
| tls32_.state_and_flags.as_struct.state = new_state; |
| return static_cast<ThreadState>(old_state_and_flags.as_struct.state); |
| } |
| |
| inline bool Thread::IsThreadSuspensionAllowable() const { |
| if (tls32_.no_thread_suspension != 0) { |
| return false; |
| } |
| for (int i = kLockLevelCount - 1; i >= 0; --i) { |
| if (i != kMutatorLock && |
| i != kUserCodeSuspensionLock && |
| GetHeldMutex(static_cast<LockLevel>(i)) != nullptr) { |
| return false; |
| } |
| } |
| // Thread autoanalysis isn't able to understand that the GetHeldMutex(...) or AssertHeld means we |
| // have the mutex meaning we need to do this hack. |
| auto is_suspending_for_user_code = [this]() NO_THREAD_SAFETY_ANALYSIS { |
| return tls32_.user_code_suspend_count != 0; |
| }; |
| if (GetHeldMutex(kUserCodeSuspensionLock) != nullptr && is_suspending_for_user_code()) { |
| return false; |
| } |
| return true; |
| } |
| |
| inline void Thread::AssertThreadSuspensionIsAllowable(bool check_locks) const { |
| if (kIsDebugBuild) { |
| if (gAborting == 0) { |
| CHECK_EQ(0u, tls32_.no_thread_suspension) << tlsPtr_.last_no_thread_suspension_cause; |
| } |
| if (check_locks) { |
| bool bad_mutexes_held = false; |
| for (int i = kLockLevelCount - 1; i >= 0; --i) { |
| // We expect no locks except the mutator_lock_. User code suspension lock is OK as long as |
| // we aren't going to be held suspended due to SuspendReason::kForUserCode. |
| if (i != kMutatorLock && i != kUserCodeSuspensionLock) { |
| BaseMutex* held_mutex = GetHeldMutex(static_cast<LockLevel>(i)); |
| if (held_mutex != nullptr) { |
| LOG(ERROR) << "holding \"" << held_mutex->GetName() |
| << "\" at point where thread suspension is expected"; |
| bad_mutexes_held = true; |
| } |
| } |
| } |
| // Make sure that if we hold the user_code_suspension_lock_ we aren't suspending due to |
| // user_code_suspend_count which would prevent the thread from ever waking up. Thread |
| // autoanalysis isn't able to understand that the GetHeldMutex(...) or AssertHeld means we |
| // have the mutex meaning we need to do this hack. |
| auto is_suspending_for_user_code = [this]() NO_THREAD_SAFETY_ANALYSIS { |
| return tls32_.user_code_suspend_count != 0; |
| }; |
| if (GetHeldMutex(kUserCodeSuspensionLock) != nullptr && is_suspending_for_user_code()) { |
| LOG(ERROR) << "suspending due to user-code while holding \"" |
| << Locks::user_code_suspension_lock_->GetName() << "\"! Thread would never " |
| << "wake up."; |
| bad_mutexes_held = true; |
| } |
| if (gAborting == 0) { |
| CHECK(!bad_mutexes_held); |
| } |
| } |
| } |
| } |
| |
| inline void Thread::TransitionToSuspendedAndRunCheckpoints(ThreadState new_state) { |
| DCHECK_NE(new_state, kRunnable); |
| DCHECK_EQ(GetState(), kRunnable); |
| union StateAndFlags old_state_and_flags; |
| union StateAndFlags new_state_and_flags; |
| while (true) { |
| old_state_and_flags.as_int = tls32_.state_and_flags.as_int; |
| if (UNLIKELY((old_state_and_flags.as_struct.flags & kCheckpointRequest) != 0)) { |
| RunCheckpointFunction(); |
| continue; |
| } |
| if (UNLIKELY((old_state_and_flags.as_struct.flags & kEmptyCheckpointRequest) != 0)) { |
| RunEmptyCheckpoint(); |
| continue; |
| } |
| // Change the state but keep the current flags (kCheckpointRequest is clear). |
| DCHECK_EQ((old_state_and_flags.as_struct.flags & kCheckpointRequest), 0); |
| DCHECK_EQ((old_state_and_flags.as_struct.flags & kEmptyCheckpointRequest), 0); |
| new_state_and_flags.as_struct.flags = old_state_and_flags.as_struct.flags; |
| new_state_and_flags.as_struct.state = new_state; |
| |
| // CAS the value with a memory ordering. |
| bool done = |
| tls32_.state_and_flags.as_atomic_int.CompareAndSetWeakRelease(old_state_and_flags.as_int, |
| new_state_and_flags.as_int); |
| if (LIKELY(done)) { |
| break; |
| } |
| } |
| } |
| |
| inline void Thread::PassActiveSuspendBarriers() { |
| while (true) { |
| uint16_t current_flags = tls32_.state_and_flags.as_struct.flags; |
| if (LIKELY((current_flags & |
| (kCheckpointRequest | kEmptyCheckpointRequest | kActiveSuspendBarrier)) == 0)) { |
| break; |
| } else if ((current_flags & kActiveSuspendBarrier) != 0) { |
| PassActiveSuspendBarriers(this); |
| } else { |
| // Impossible |
| LOG(FATAL) << "Fatal, thread transitioned into suspended without running the checkpoint"; |
| } |
| } |
| } |
| |
| inline void Thread::TransitionFromRunnableToSuspended(ThreadState new_state) { |
| AssertThreadSuspensionIsAllowable(); |
| PoisonObjectPointersIfDebug(); |
| DCHECK_EQ(this, Thread::Current()); |
| // Change to non-runnable state, thereby appearing suspended to the system. |
| TransitionToSuspendedAndRunCheckpoints(new_state); |
| // Mark the release of the share of the mutator_lock_. |
| Locks::mutator_lock_->TransitionFromRunnableToSuspended(this); |
| // Once suspended - check the active suspend barrier flag |
| PassActiveSuspendBarriers(); |
| } |
| |
| inline ThreadState Thread::TransitionFromSuspendedToRunnable() { |
| union StateAndFlags old_state_and_flags; |
| old_state_and_flags.as_int = tls32_.state_and_flags.as_int; |
| int16_t old_state = old_state_and_flags.as_struct.state; |
| DCHECK_NE(static_cast<ThreadState>(old_state), kRunnable); |
| do { |
| Locks::mutator_lock_->AssertNotHeld(this); // Otherwise we starve GC.. |
| old_state_and_flags.as_int = tls32_.state_and_flags.as_int; |
| DCHECK_EQ(old_state_and_flags.as_struct.state, old_state); |
| if (LIKELY(old_state_and_flags.as_struct.flags == 0)) { |
| // Optimize for the return from native code case - this is the fast path. |
| // Atomically change from suspended to runnable if no suspend request pending. |
| union StateAndFlags new_state_and_flags; |
| new_state_and_flags.as_int = old_state_and_flags.as_int; |
| new_state_and_flags.as_struct.state = kRunnable; |
| |
| // CAS the value with a memory barrier. |
| if (LIKELY(tls32_.state_and_flags.as_atomic_int.CompareAndSetWeakAcquire( |
| old_state_and_flags.as_int, |
| new_state_and_flags.as_int))) { |
| // Mark the acquisition of a share of the mutator_lock_. |
| Locks::mutator_lock_->TransitionFromSuspendedToRunnable(this); |
| break; |
| } |
| } else if ((old_state_and_flags.as_struct.flags & kActiveSuspendBarrier) != 0) { |
| PassActiveSuspendBarriers(this); |
| } else if ((old_state_and_flags.as_struct.flags & |
| (kCheckpointRequest | kEmptyCheckpointRequest)) != 0) { |
| // Impossible |
| LOG(FATAL) << "Transitioning to runnable with checkpoint flag, " |
| << " flags=" << old_state_and_flags.as_struct.flags |
| << " state=" << old_state_and_flags.as_struct.state; |
| } else if ((old_state_and_flags.as_struct.flags & kSuspendRequest) != 0) { |
| // Wait while our suspend count is non-zero. |
| |
| // We pass null to the MutexLock as we may be in a situation where the |
| // runtime is shutting down. Guarding ourselves from that situation |
| // requires to take the shutdown lock, which is undesirable here. |
| Thread* thread_to_pass = nullptr; |
| if (kIsDebugBuild && !IsDaemon()) { |
| // We know we can make our debug locking checks on non-daemon threads, |
| // so re-enable them on debug builds. |
| thread_to_pass = this; |
| } |
| MutexLock mu(thread_to_pass, *Locks::thread_suspend_count_lock_); |
| ScopedTransitioningToRunnable scoped_transitioning_to_runnable(this); |
| old_state_and_flags.as_int = tls32_.state_and_flags.as_int; |
| DCHECK_EQ(old_state_and_flags.as_struct.state, old_state); |
| while ((old_state_and_flags.as_struct.flags & kSuspendRequest) != 0) { |
| // Re-check when Thread::resume_cond_ is notified. |
| Thread::resume_cond_->Wait(thread_to_pass); |
| old_state_and_flags.as_int = tls32_.state_and_flags.as_int; |
| DCHECK_EQ(old_state_and_flags.as_struct.state, old_state); |
| } |
| DCHECK_EQ(GetSuspendCount(), 0); |
| } |
| } while (true); |
| // Run the flip function, if set. |
| Closure* flip_func = GetFlipFunction(); |
| if (flip_func != nullptr) { |
| flip_func->Run(this); |
| } |
| return static_cast<ThreadState>(old_state); |
| } |
| |
| inline mirror::Object* Thread::AllocTlab(size_t bytes) { |
| DCHECK_GE(TlabSize(), bytes); |
| ++tlsPtr_.thread_local_objects; |
| mirror::Object* ret = reinterpret_cast<mirror::Object*>(tlsPtr_.thread_local_pos); |
| tlsPtr_.thread_local_pos += bytes; |
| return ret; |
| } |
| |
| inline bool Thread::PushOnThreadLocalAllocationStack(mirror::Object* obj) { |
| DCHECK_LE(tlsPtr_.thread_local_alloc_stack_top, tlsPtr_.thread_local_alloc_stack_end); |
| if (tlsPtr_.thread_local_alloc_stack_top < tlsPtr_.thread_local_alloc_stack_end) { |
| // There's room. |
| DCHECK_LE(reinterpret_cast<uint8_t*>(tlsPtr_.thread_local_alloc_stack_top) + |
| sizeof(StackReference<mirror::Object>), |
| reinterpret_cast<uint8_t*>(tlsPtr_.thread_local_alloc_stack_end)); |
| DCHECK(tlsPtr_.thread_local_alloc_stack_top->AsMirrorPtr() == nullptr); |
| tlsPtr_.thread_local_alloc_stack_top->Assign(obj); |
| ++tlsPtr_.thread_local_alloc_stack_top; |
| return true; |
| } |
| return false; |
| } |
| |
| inline void Thread::SetThreadLocalAllocationStack(StackReference<mirror::Object>* start, |
| StackReference<mirror::Object>* end) { |
| DCHECK(Thread::Current() == this) << "Should be called by self"; |
| DCHECK(start != nullptr); |
| DCHECK(end != nullptr); |
| DCHECK_ALIGNED(start, sizeof(StackReference<mirror::Object>)); |
| DCHECK_ALIGNED(end, sizeof(StackReference<mirror::Object>)); |
| DCHECK_LT(start, end); |
| tlsPtr_.thread_local_alloc_stack_end = end; |
| tlsPtr_.thread_local_alloc_stack_top = start; |
| } |
| |
| inline void Thread::RevokeThreadLocalAllocationStack() { |
| if (kIsDebugBuild) { |
| // Note: self is not necessarily equal to this thread since thread may be suspended. |
| Thread* self = Thread::Current(); |
| DCHECK(this == self || IsSuspended() || GetState() == kWaitingPerformingGc) |
| << GetState() << " thread " << this << " self " << self; |
| } |
| tlsPtr_.thread_local_alloc_stack_end = nullptr; |
| tlsPtr_.thread_local_alloc_stack_top = nullptr; |
| } |
| |
| inline void Thread::PoisonObjectPointersIfDebug() { |
| if (kObjPtrPoisoning) { |
| Thread::Current()->PoisonObjectPointers(); |
| } |
| } |
| |
| inline bool Thread::ModifySuspendCount(Thread* self, |
| int delta, |
| AtomicInteger* suspend_barrier, |
| SuspendReason reason) { |
| if (delta > 0 && ((kUseReadBarrier && this != self) || suspend_barrier != nullptr)) { |
| // When delta > 0 (requesting a suspend), ModifySuspendCountInternal() may fail either if |
| // active_suspend_barriers is full or we are in the middle of a thread flip. Retry in a loop. |
| while (true) { |
| if (LIKELY(ModifySuspendCountInternal(self, delta, suspend_barrier, reason))) { |
| return true; |
| } else { |
| // Failure means the list of active_suspend_barriers is full or we are in the middle of a |
| // thread flip, we should release the thread_suspend_count_lock_ (to avoid deadlock) and |
| // wait till the target thread has executed or Thread::PassActiveSuspendBarriers() or the |
| // flip function. Note that we could not simply wait for the thread to change to a suspended |
| // state, because it might need to run checkpoint function before the state change or |
| // resumes from the resume_cond_, which also needs thread_suspend_count_lock_. |
| // |
| // The list of active_suspend_barriers is very unlikely to be full since more than |
| // kMaxSuspendBarriers threads need to execute SuspendAllInternal() simultaneously, and |
| // target thread stays in kRunnable in the mean time. |
| Locks::thread_suspend_count_lock_->ExclusiveUnlock(self); |
| NanoSleep(100000); |
| Locks::thread_suspend_count_lock_->ExclusiveLock(self); |
| } |
| } |
| } else { |
| return ModifySuspendCountInternal(self, delta, suspend_barrier, reason); |
| } |
| } |
| |
| inline ShadowFrame* Thread::PushShadowFrame(ShadowFrame* new_top_frame) { |
| new_top_frame->CheckConsistentVRegs(); |
| return tlsPtr_.managed_stack.PushShadowFrame(new_top_frame); |
| } |
| |
| inline ShadowFrame* Thread::PopShadowFrame() { |
| return tlsPtr_.managed_stack.PopShadowFrame(); |
| } |
| |
| inline uint8_t* Thread::GetStackEndForInterpreter(bool implicit_overflow_check) const { |
| uint8_t* end = tlsPtr_.stack_end + (implicit_overflow_check |
| ? GetStackOverflowReservedBytes(kRuntimeISA) |
| : 0); |
| if (kIsDebugBuild) { |
| // In a debuggable build, but especially under ASAN, the access-checks interpreter has a |
| // potentially humongous stack size. We don't want to take too much of the stack regularly, |
| // so do not increase the regular reserved size (for compiled code etc) and only report the |
| // virtually smaller stack to the interpreter here. |
| end += GetStackOverflowReservedBytes(kRuntimeISA); |
| } |
| return end; |
| } |
| |
| inline void Thread::ResetDefaultStackEnd() { |
| // Our stacks grow down, so we want stack_end_ to be near there, but reserving enough room |
| // to throw a StackOverflowError. |
| tlsPtr_.stack_end = tlsPtr_.stack_begin + GetStackOverflowReservedBytes(kRuntimeISA); |
| } |
| |
| } // namespace art |
| |
| #endif // ART_RUNTIME_THREAD_INL_H_ |