| /* |
| * Copyright (C) 2011 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "codegen_arm64.h" |
| |
| #include <inttypes.h> |
| |
| #include <string> |
| |
| #include "dex/compiler_internals.h" |
| #include "dex/quick/mir_to_lir-inl.h" |
| #include "dex/reg_storage_eq.h" |
| |
| namespace art { |
| |
| static constexpr RegStorage core_regs_arr[] = |
| {rs_w0, rs_w1, rs_w2, rs_w3, rs_w4, rs_w5, rs_w6, rs_w7, |
| rs_w8, rs_w9, rs_w10, rs_w11, rs_w12, rs_w13, rs_w14, rs_w15, |
| rs_w16, rs_w17, rs_w18, rs_w19, rs_w20, rs_w21, rs_w22, rs_w23, |
| rs_w24, rs_w25, rs_w26, rs_w27, rs_w28, rs_w29, rs_w30, rs_w31, |
| rs_wzr}; |
| static constexpr RegStorage core64_regs_arr[] = |
| {rs_x0, rs_x1, rs_x2, rs_x3, rs_x4, rs_x5, rs_x6, rs_x7, |
| rs_x8, rs_x9, rs_x10, rs_x11, rs_x12, rs_x13, rs_x14, rs_x15, |
| rs_x16, rs_x17, rs_x18, rs_x19, rs_x20, rs_x21, rs_x22, rs_x23, |
| rs_x24, rs_x25, rs_x26, rs_x27, rs_x28, rs_x29, rs_x30, rs_x31, |
| rs_xzr}; |
| static constexpr RegStorage sp_regs_arr[] = |
| {rs_f0, rs_f1, rs_f2, rs_f3, rs_f4, rs_f5, rs_f6, rs_f7, |
| rs_f8, rs_f9, rs_f10, rs_f11, rs_f12, rs_f13, rs_f14, rs_f15, |
| rs_f16, rs_f17, rs_f18, rs_f19, rs_f20, rs_f21, rs_f22, rs_f23, |
| rs_f24, rs_f25, rs_f26, rs_f27, rs_f28, rs_f29, rs_f30, rs_f31}; |
| static constexpr RegStorage dp_regs_arr[] = |
| {rs_d0, rs_d1, rs_d2, rs_d3, rs_d4, rs_d5, rs_d6, rs_d7, |
| rs_d8, rs_d9, rs_d10, rs_d11, rs_d12, rs_d13, rs_d14, rs_d15, |
| rs_d16, rs_d17, rs_d18, rs_d19, rs_d20, rs_d21, rs_d22, rs_d23, |
| rs_d24, rs_d25, rs_d26, rs_d27, rs_d28, rs_d29, rs_d30, rs_d31}; |
| static constexpr RegStorage reserved_regs_arr[] = |
| {rs_wSUSPEND, rs_wSELF, rs_wsp, rs_wLR, rs_wzr}; |
| static constexpr RegStorage reserved64_regs_arr[] = |
| {rs_xSUSPEND, rs_xSELF, rs_sp, rs_xLR, rs_xzr}; |
| // TUNING: Are there too many temp registers and too less promote target? |
| // This definition need to be matched with runtime.cc, quick entry assembly and JNI compiler |
| // Note: we are not able to call to C function directly if it un-match C ABI. |
| // Currently, rs_rA64_SELF is not a callee save register which does not match C ABI. |
| static constexpr RegStorage core_temps_arr[] = |
| {rs_w0, rs_w1, rs_w2, rs_w3, rs_w4, rs_w5, rs_w6, rs_w7, |
| rs_w8, rs_w9, rs_w10, rs_w11, rs_w12, rs_w13, rs_w14, rs_w15, rs_w16, |
| rs_w17}; |
| static constexpr RegStorage core64_temps_arr[] = |
| {rs_x0, rs_x1, rs_x2, rs_x3, rs_x4, rs_x5, rs_x6, rs_x7, |
| rs_x8, rs_x9, rs_x10, rs_x11, rs_x12, rs_x13, rs_x14, rs_x15, rs_x16, |
| rs_x17}; |
| static constexpr RegStorage sp_temps_arr[] = |
| {rs_f0, rs_f1, rs_f2, rs_f3, rs_f4, rs_f5, rs_f6, rs_f7, |
| rs_f16, rs_f17, rs_f18, rs_f19, rs_f20, rs_f21, rs_f22, rs_f23, |
| rs_f24, rs_f25, rs_f26, rs_f27, rs_f28, rs_f29, rs_f30, rs_f31}; |
| static constexpr RegStorage dp_temps_arr[] = |
| {rs_d0, rs_d1, rs_d2, rs_d3, rs_d4, rs_d5, rs_d6, rs_d7, |
| rs_d16, rs_d17, rs_d18, rs_d19, rs_d20, rs_d21, rs_d22, rs_d23, |
| rs_d24, rs_d25, rs_d26, rs_d27, rs_d28, rs_d29, rs_d30, rs_d31}; |
| |
| static constexpr ArrayRef<const RegStorage> core_regs(core_regs_arr); |
| static constexpr ArrayRef<const RegStorage> core64_regs(core64_regs_arr); |
| static constexpr ArrayRef<const RegStorage> sp_regs(sp_regs_arr); |
| static constexpr ArrayRef<const RegStorage> dp_regs(dp_regs_arr); |
| static constexpr ArrayRef<const RegStorage> reserved_regs(reserved_regs_arr); |
| static constexpr ArrayRef<const RegStorage> reserved64_regs(reserved64_regs_arr); |
| static constexpr ArrayRef<const RegStorage> core_temps(core_temps_arr); |
| static constexpr ArrayRef<const RegStorage> core64_temps(core64_temps_arr); |
| static constexpr ArrayRef<const RegStorage> sp_temps(sp_temps_arr); |
| static constexpr ArrayRef<const RegStorage> dp_temps(dp_temps_arr); |
| |
| RegLocation Arm64Mir2Lir::LocCReturn() { |
| return arm_loc_c_return; |
| } |
| |
| RegLocation Arm64Mir2Lir::LocCReturnRef() { |
| return arm_loc_c_return_ref; |
| } |
| |
| RegLocation Arm64Mir2Lir::LocCReturnWide() { |
| return arm_loc_c_return_wide; |
| } |
| |
| RegLocation Arm64Mir2Lir::LocCReturnFloat() { |
| return arm_loc_c_return_float; |
| } |
| |
| RegLocation Arm64Mir2Lir::LocCReturnDouble() { |
| return arm_loc_c_return_double; |
| } |
| |
| // Return a target-dependent special register. |
| RegStorage Arm64Mir2Lir::TargetReg(SpecialTargetRegister reg) { |
| RegStorage res_reg = RegStorage::InvalidReg(); |
| switch (reg) { |
| case kSelf: res_reg = rs_wSELF; break; |
| case kSuspend: res_reg = rs_wSUSPEND; break; |
| case kLr: res_reg = rs_wLR; break; |
| case kPc: res_reg = RegStorage::InvalidReg(); break; |
| case kSp: res_reg = rs_wsp; break; |
| case kArg0: res_reg = rs_w0; break; |
| case kArg1: res_reg = rs_w1; break; |
| case kArg2: res_reg = rs_w2; break; |
| case kArg3: res_reg = rs_w3; break; |
| case kArg4: res_reg = rs_w4; break; |
| case kArg5: res_reg = rs_w5; break; |
| case kArg6: res_reg = rs_w6; break; |
| case kArg7: res_reg = rs_w7; break; |
| case kFArg0: res_reg = rs_f0; break; |
| case kFArg1: res_reg = rs_f1; break; |
| case kFArg2: res_reg = rs_f2; break; |
| case kFArg3: res_reg = rs_f3; break; |
| case kFArg4: res_reg = rs_f4; break; |
| case kFArg5: res_reg = rs_f5; break; |
| case kFArg6: res_reg = rs_f6; break; |
| case kFArg7: res_reg = rs_f7; break; |
| case kRet0: res_reg = rs_w0; break; |
| case kRet1: res_reg = rs_w1; break; |
| case kInvokeTgt: res_reg = rs_wLR; break; |
| case kHiddenArg: res_reg = rs_w12; break; |
| case kHiddenFpArg: res_reg = RegStorage::InvalidReg(); break; |
| case kCount: res_reg = RegStorage::InvalidReg(); break; |
| default: res_reg = RegStorage::InvalidReg(); |
| } |
| return res_reg; |
| } |
| |
| /* |
| * Decode the register id. This routine makes assumptions on the encoding made by RegStorage. |
| */ |
| ResourceMask Arm64Mir2Lir::GetRegMaskCommon(const RegStorage& reg) const { |
| // TODO(Arm64): this function depends too much on the internal RegStorage encoding. Refactor. |
| |
| // Check if the shape mask is zero (i.e. invalid). |
| if (UNLIKELY(reg == rs_wzr || reg == rs_xzr)) { |
| // The zero register is not a true register. It is just an immediate zero. |
| return kEncodeNone; |
| } |
| |
| return ResourceMask::Bit( |
| // FP register starts at bit position 32. |
| (reg.IsFloat() ? kArm64FPReg0 : 0) + reg.GetRegNum()); |
| } |
| |
| ResourceMask Arm64Mir2Lir::GetPCUseDefEncoding() const { |
| // Note: On arm64, we are not able to set pc except branch instructions, which is regarded as a |
| // kind of barrier. All other instructions only use pc, which has no dependency between any |
| // of them. So it is fine to just return kEncodeNone here. |
| return kEncodeNone; |
| } |
| |
| // Arm64 specific setup. TODO: inline?: |
| void Arm64Mir2Lir::SetupTargetResourceMasks(LIR* lir, uint64_t flags, |
| ResourceMask* use_mask, ResourceMask* def_mask) { |
| DCHECK_EQ(cu_->instruction_set, kArm64); |
| DCHECK(!lir->flags.use_def_invalid); |
| |
| // Note: REG_USE_PC is ignored, the reason is the same with what we do in GetPCUseDefEncoding(). |
| // These flags are somewhat uncommon - bypass if we can. |
| if ((flags & (REG_DEF_SP | REG_USE_SP | REG_DEF_LR)) != 0) { |
| if (flags & REG_DEF_SP) { |
| def_mask->SetBit(kArm64RegSP); |
| } |
| |
| if (flags & REG_USE_SP) { |
| use_mask->SetBit(kArm64RegSP); |
| } |
| |
| if (flags & REG_DEF_LR) { |
| def_mask->SetBit(kArm64RegLR); |
| } |
| } |
| } |
| |
| ArmConditionCode Arm64Mir2Lir::ArmConditionEncoding(ConditionCode ccode) { |
| ArmConditionCode res; |
| switch (ccode) { |
| case kCondEq: res = kArmCondEq; break; |
| case kCondNe: res = kArmCondNe; break; |
| case kCondCs: res = kArmCondCs; break; |
| case kCondCc: res = kArmCondCc; break; |
| case kCondUlt: res = kArmCondCc; break; |
| case kCondUge: res = kArmCondCs; break; |
| case kCondMi: res = kArmCondMi; break; |
| case kCondPl: res = kArmCondPl; break; |
| case kCondVs: res = kArmCondVs; break; |
| case kCondVc: res = kArmCondVc; break; |
| case kCondHi: res = kArmCondHi; break; |
| case kCondLs: res = kArmCondLs; break; |
| case kCondGe: res = kArmCondGe; break; |
| case kCondLt: res = kArmCondLt; break; |
| case kCondGt: res = kArmCondGt; break; |
| case kCondLe: res = kArmCondLe; break; |
| case kCondAl: res = kArmCondAl; break; |
| case kCondNv: res = kArmCondNv; break; |
| default: |
| LOG(FATAL) << "Bad condition code " << ccode; |
| res = static_cast<ArmConditionCode>(0); // Quiet gcc |
| } |
| return res; |
| } |
| |
| static const char *shift_names[4] = { |
| "lsl", |
| "lsr", |
| "asr", |
| "ror" |
| }; |
| |
| static const char* extend_names[8] = { |
| "uxtb", |
| "uxth", |
| "uxtw", |
| "uxtx", |
| "sxtb", |
| "sxth", |
| "sxtw", |
| "sxtx", |
| }; |
| |
| /* Decode and print a register extension (e.g. ", uxtb #1") */ |
| static void DecodeRegExtendOrShift(int operand, char *buf, size_t buf_size) { |
| if ((operand & (1 << 6)) == 0) { |
| const char *shift_name = shift_names[(operand >> 7) & 0x3]; |
| int amount = operand & 0x3f; |
| snprintf(buf, buf_size, ", %s #%d", shift_name, amount); |
| } else { |
| const char *extend_name = extend_names[(operand >> 3) & 0x7]; |
| int amount = operand & 0x7; |
| if (amount == 0) { |
| snprintf(buf, buf_size, ", %s", extend_name); |
| } else { |
| snprintf(buf, buf_size, ", %s #%d", extend_name, amount); |
| } |
| } |
| } |
| |
| #define BIT_MASK(w) ((UINT64_C(1) << (w)) - UINT64_C(1)) |
| |
| static uint64_t RotateRight(uint64_t value, unsigned rotate, unsigned width) { |
| DCHECK_LE(width, 64U); |
| rotate &= 63; |
| value = value & BIT_MASK(width); |
| return ((value & BIT_MASK(rotate)) << (width - rotate)) | (value >> rotate); |
| } |
| |
| static uint64_t RepeatBitsAcrossReg(bool is_wide, uint64_t value, unsigned width) { |
| unsigned i; |
| unsigned reg_size = (is_wide) ? 64 : 32; |
| uint64_t result = value & BIT_MASK(width); |
| for (i = width; i < reg_size; i *= 2) { |
| result |= (result << i); |
| } |
| DCHECK_EQ(i, reg_size); |
| return result; |
| } |
| |
| /** |
| * @brief Decode an immediate in the form required by logical instructions. |
| * |
| * @param is_wide Whether @p value encodes a 64-bit (as opposed to 32-bit) immediate. |
| * @param value The encoded logical immediates that is to be decoded. |
| * @return The decoded logical immediate. |
| * @note This is the inverse of Arm64Mir2Lir::EncodeLogicalImmediate(). |
| */ |
| uint64_t Arm64Mir2Lir::DecodeLogicalImmediate(bool is_wide, int value) { |
| unsigned n = (value >> 12) & 0x01; |
| unsigned imm_r = (value >> 6) & 0x3f; |
| unsigned imm_s = (value >> 0) & 0x3f; |
| |
| // An integer is constructed from the n, imm_s and imm_r bits according to |
| // the following table: |
| // |
| // N imms immr size S R |
| // 1 ssssss rrrrrr 64 UInt(ssssss) UInt(rrrrrr) |
| // 0 0sssss xrrrrr 32 UInt(sssss) UInt(rrrrr) |
| // 0 10ssss xxrrrr 16 UInt(ssss) UInt(rrrr) |
| // 0 110sss xxxrrr 8 UInt(sss) UInt(rrr) |
| // 0 1110ss xxxxrr 4 UInt(ss) UInt(rr) |
| // 0 11110s xxxxxr 2 UInt(s) UInt(r) |
| // (s bits must not be all set) |
| // |
| // A pattern is constructed of size bits, where the least significant S+1 |
| // bits are set. The pattern is rotated right by R, and repeated across a |
| // 32 or 64-bit value, depending on destination register width. |
| |
| if (n == 1) { |
| DCHECK_NE(imm_s, 0x3fU); |
| uint64_t bits = BIT_MASK(imm_s + 1); |
| return RotateRight(bits, imm_r, 64); |
| } else { |
| DCHECK_NE((imm_s >> 1), 0x1fU); |
| for (unsigned width = 0x20; width >= 0x2; width >>= 1) { |
| if ((imm_s & width) == 0) { |
| unsigned mask = (unsigned)(width - 1); |
| DCHECK_NE((imm_s & mask), mask); |
| uint64_t bits = BIT_MASK((imm_s & mask) + 1); |
| return RepeatBitsAcrossReg(is_wide, RotateRight(bits, imm_r & mask, width), width); |
| } |
| } |
| } |
| return 0; |
| } |
| |
| /** |
| * @brief Decode an 8-bit single point number encoded with EncodeImmSingle(). |
| */ |
| static float DecodeImmSingle(uint8_t small_float) { |
| int mantissa = (small_float & 0x0f) + 0x10; |
| int sign = ((small_float & 0x80) == 0) ? 1 : -1; |
| float signed_mantissa = static_cast<float>(sign*mantissa); |
| int exponent = (((small_float >> 4) & 0x7) + 4) & 0x7; |
| return signed_mantissa*static_cast<float>(1 << exponent)*0.0078125f; |
| } |
| |
| static const char* cc_names[] = {"eq", "ne", "cs", "cc", "mi", "pl", "vs", "vc", |
| "hi", "ls", "ge", "lt", "gt", "le", "al", "nv"}; |
| /* |
| * Interpret a format string and build a string no longer than size |
| * See format key in assemble_arm64.cc. |
| */ |
| std::string Arm64Mir2Lir::BuildInsnString(const char* fmt, LIR* lir, unsigned char* base_addr) { |
| std::string buf; |
| const char* fmt_end = &fmt[strlen(fmt)]; |
| char tbuf[256]; |
| const char* name; |
| char nc; |
| while (fmt < fmt_end) { |
| int operand; |
| if (*fmt == '!') { |
| fmt++; |
| DCHECK_LT(fmt, fmt_end); |
| nc = *fmt++; |
| if (nc == '!') { |
| strcpy(tbuf, "!"); |
| } else { |
| DCHECK_LT(fmt, fmt_end); |
| DCHECK_LT(static_cast<unsigned>(nc-'0'), 4U); |
| operand = lir->operands[nc-'0']; |
| switch (*fmt++) { |
| case 'e': { |
| // Omit ", uxtw #0" in strings like "add w0, w1, w3, uxtw #0" and |
| // ", uxtx #0" in strings like "add x0, x1, x3, uxtx #0" |
| int omittable = ((IS_WIDE(lir->opcode)) ? EncodeExtend(kA64Uxtw, 0) : |
| EncodeExtend(kA64Uxtw, 0)); |
| if (LIKELY(operand == omittable)) { |
| strcpy(tbuf, ""); |
| } else { |
| DecodeRegExtendOrShift(operand, tbuf, arraysize(tbuf)); |
| } |
| } |
| break; |
| case 'o': |
| // Omit ", lsl #0" |
| if (LIKELY(operand == EncodeShift(kA64Lsl, 0))) { |
| strcpy(tbuf, ""); |
| } else { |
| DecodeRegExtendOrShift(operand, tbuf, arraysize(tbuf)); |
| } |
| break; |
| case 'B': |
| switch (operand) { |
| case kSY: |
| name = "sy"; |
| break; |
| case kST: |
| name = "st"; |
| break; |
| case kISH: |
| name = "ish"; |
| break; |
| case kISHST: |
| name = "ishst"; |
| break; |
| case kNSH: |
| name = "nsh"; |
| break; |
| case kNSHST: |
| name = "shst"; |
| break; |
| default: |
| name = "DecodeError2"; |
| break; |
| } |
| strcpy(tbuf, name); |
| break; |
| case 's': |
| snprintf(tbuf, arraysize(tbuf), "s%d", operand & RegStorage::kRegNumMask); |
| break; |
| case 'S': |
| snprintf(tbuf, arraysize(tbuf), "d%d", operand & RegStorage::kRegNumMask); |
| break; |
| case 'f': |
| snprintf(tbuf, arraysize(tbuf), "%c%d", (IS_FWIDE(lir->opcode)) ? 'd' : 's', |
| operand & RegStorage::kRegNumMask); |
| break; |
| case 'l': { |
| bool is_wide = IS_WIDE(lir->opcode); |
| uint64_t imm = DecodeLogicalImmediate(is_wide, operand); |
| snprintf(tbuf, arraysize(tbuf), "%" PRId64 " (%#" PRIx64 ")", imm, imm); |
| } |
| break; |
| case 'I': |
| snprintf(tbuf, arraysize(tbuf), "%f", DecodeImmSingle(operand)); |
| break; |
| case 'M': |
| if (LIKELY(operand == 0)) |
| strcpy(tbuf, ""); |
| else |
| snprintf(tbuf, arraysize(tbuf), ", lsl #%d", 16*operand); |
| break; |
| case 'd': |
| snprintf(tbuf, arraysize(tbuf), "%d", operand); |
| break; |
| case 'w': |
| if (LIKELY(operand != rwzr)) |
| snprintf(tbuf, arraysize(tbuf), "w%d", operand & RegStorage::kRegNumMask); |
| else |
| strcpy(tbuf, "wzr"); |
| break; |
| case 'W': |
| if (LIKELY(operand != rwsp)) |
| snprintf(tbuf, arraysize(tbuf), "w%d", operand & RegStorage::kRegNumMask); |
| else |
| strcpy(tbuf, "wsp"); |
| break; |
| case 'x': |
| if (LIKELY(operand != rxzr)) |
| snprintf(tbuf, arraysize(tbuf), "x%d", operand & RegStorage::kRegNumMask); |
| else |
| strcpy(tbuf, "xzr"); |
| break; |
| case 'X': |
| if (LIKELY(operand != rsp)) |
| snprintf(tbuf, arraysize(tbuf), "x%d", operand & RegStorage::kRegNumMask); |
| else |
| strcpy(tbuf, "sp"); |
| break; |
| case 'D': |
| snprintf(tbuf, arraysize(tbuf), "%d", operand*((IS_WIDE(lir->opcode)) ? 8 : 4)); |
| break; |
| case 'E': |
| snprintf(tbuf, arraysize(tbuf), "%d", operand*4); |
| break; |
| case 'F': |
| snprintf(tbuf, arraysize(tbuf), "%d", operand*2); |
| break; |
| case 'G': |
| if (LIKELY(operand == 0)) |
| strcpy(tbuf, ""); |
| else |
| strcpy(tbuf, (IS_WIDE(lir->opcode)) ? ", lsl #3" : ", lsl #2"); |
| break; |
| case 'c': |
| strcpy(tbuf, cc_names[operand]); |
| break; |
| case 't': |
| snprintf(tbuf, arraysize(tbuf), "0x%08" PRIxPTR " (L%p)", |
| reinterpret_cast<uintptr_t>(base_addr) + lir->offset + (operand << 2), |
| lir->target); |
| break; |
| case 'r': { |
| bool is_wide = IS_WIDE(lir->opcode); |
| if (LIKELY(operand != rwzr && operand != rxzr)) { |
| snprintf(tbuf, arraysize(tbuf), "%c%d", (is_wide) ? 'x' : 'w', |
| operand & RegStorage::kRegNumMask); |
| } else { |
| strcpy(tbuf, (is_wide) ? "xzr" : "wzr"); |
| } |
| } |
| break; |
| case 'R': { |
| bool is_wide = IS_WIDE(lir->opcode); |
| if (LIKELY(operand != rwsp && operand != rsp)) { |
| snprintf(tbuf, arraysize(tbuf), "%c%d", (is_wide) ? 'x' : 'w', |
| operand & RegStorage::kRegNumMask); |
| } else { |
| strcpy(tbuf, (is_wide) ? "sp" : "wsp"); |
| } |
| } |
| break; |
| case 'p': |
| snprintf(tbuf, arraysize(tbuf), ".+%d (addr %#" PRIxPTR ")", 4*operand, |
| reinterpret_cast<uintptr_t>(base_addr) + lir->offset + 4*operand); |
| break; |
| case 'T': |
| if (LIKELY(operand == 0)) |
| strcpy(tbuf, ""); |
| else if (operand == 1) |
| strcpy(tbuf, ", lsl #12"); |
| else |
| strcpy(tbuf, ", DecodeError3"); |
| break; |
| default: |
| strcpy(tbuf, "DecodeError1"); |
| break; |
| } |
| buf += tbuf; |
| } |
| } else { |
| buf += *fmt++; |
| } |
| } |
| return buf; |
| } |
| |
| void Arm64Mir2Lir::DumpResourceMask(LIR* arm_lir, const ResourceMask& mask, const char* prefix) { |
| char buf[256]; |
| buf[0] = 0; |
| |
| if (mask.Equals(kEncodeAll)) { |
| strcpy(buf, "all"); |
| } else { |
| char num[8]; |
| int i; |
| |
| for (i = 0; i < kArm64RegEnd; i++) { |
| if (mask.HasBit(i)) { |
| snprintf(num, arraysize(num), "%d ", i); |
| strcat(buf, num); |
| } |
| } |
| |
| if (mask.HasBit(ResourceMask::kCCode)) { |
| strcat(buf, "cc "); |
| } |
| if (mask.HasBit(ResourceMask::kFPStatus)) { |
| strcat(buf, "fpcc "); |
| } |
| |
| /* Memory bits */ |
| if (arm_lir && (mask.HasBit(ResourceMask::kDalvikReg))) { |
| snprintf(buf + strlen(buf), arraysize(buf) - strlen(buf), "dr%d%s", |
| DECODE_ALIAS_INFO_REG(arm_lir->flags.alias_info), |
| DECODE_ALIAS_INFO_WIDE(arm_lir->flags.alias_info) ? "(+1)" : ""); |
| } |
| if (mask.HasBit(ResourceMask::kLiteral)) { |
| strcat(buf, "lit "); |
| } |
| |
| if (mask.HasBit(ResourceMask::kHeapRef)) { |
| strcat(buf, "heap "); |
| } |
| if (mask.HasBit(ResourceMask::kMustNotAlias)) { |
| strcat(buf, "noalias "); |
| } |
| } |
| if (buf[0]) { |
| LOG(INFO) << prefix << ": " << buf; |
| } |
| } |
| |
| bool Arm64Mir2Lir::IsUnconditionalBranch(LIR* lir) { |
| return (lir->opcode == kA64B1t); |
| } |
| |
| bool Arm64Mir2Lir::SupportsVolatileLoadStore(OpSize size) { |
| return true; |
| } |
| |
| RegisterClass Arm64Mir2Lir::RegClassForFieldLoadStore(OpSize size, bool is_volatile) { |
| if (UNLIKELY(is_volatile)) { |
| // On arm64, fp register load/store is atomic only for single bytes. |
| if (size != kSignedByte && size != kUnsignedByte) { |
| return (size == kReference) ? kRefReg : kCoreReg; |
| } |
| } |
| return RegClassBySize(size); |
| } |
| |
| Arm64Mir2Lir::Arm64Mir2Lir(CompilationUnit* cu, MIRGraph* mir_graph, ArenaAllocator* arena) |
| : Mir2Lir(cu, mir_graph, arena) { |
| // Sanity check - make sure encoding map lines up. |
| for (int i = 0; i < kA64Last; i++) { |
| if (UNWIDE(Arm64Mir2Lir::EncodingMap[i].opcode) != i) { |
| LOG(FATAL) << "Encoding order for " << Arm64Mir2Lir::EncodingMap[i].name |
| << " is wrong: expecting " << i << ", seeing " |
| << static_cast<int>(Arm64Mir2Lir::EncodingMap[i].opcode); |
| } |
| } |
| } |
| |
| Mir2Lir* Arm64CodeGenerator(CompilationUnit* const cu, MIRGraph* const mir_graph, |
| ArenaAllocator* const arena) { |
| return new Arm64Mir2Lir(cu, mir_graph, arena); |
| } |
| |
| void Arm64Mir2Lir::CompilerInitializeRegAlloc() { |
| reg_pool_ = new (arena_) RegisterPool(this, arena_, core_regs, core64_regs, sp_regs, dp_regs, |
| reserved_regs, reserved64_regs, core_temps, core64_temps, |
| sp_temps, dp_temps); |
| |
| // Target-specific adjustments. |
| // Alias single precision float registers to corresponding double registers. |
| GrowableArray<RegisterInfo*>::Iterator fp_it(®_pool_->sp_regs_); |
| for (RegisterInfo* info = fp_it.Next(); info != nullptr; info = fp_it.Next()) { |
| int fp_reg_num = info->GetReg().GetRegNum(); |
| RegStorage dp_reg = RegStorage::FloatSolo64(fp_reg_num); |
| RegisterInfo* dp_reg_info = GetRegInfo(dp_reg); |
| // Double precision register's master storage should refer to itself. |
| DCHECK_EQ(dp_reg_info, dp_reg_info->Master()); |
| // Redirect single precision's master storage to master. |
| info->SetMaster(dp_reg_info); |
| // Singles should show a single 32-bit mask bit, at first referring to the low half. |
| DCHECK_EQ(info->StorageMask(), 0x1U); |
| } |
| |
| // Alias 32bit W registers to corresponding 64bit X registers. |
| GrowableArray<RegisterInfo*>::Iterator w_it(®_pool_->core_regs_); |
| for (RegisterInfo* info = w_it.Next(); info != nullptr; info = w_it.Next()) { |
| int x_reg_num = info->GetReg().GetRegNum(); |
| RegStorage x_reg = RegStorage::Solo64(x_reg_num); |
| RegisterInfo* x_reg_info = GetRegInfo(x_reg); |
| // 64bit X register's master storage should refer to itself. |
| DCHECK_EQ(x_reg_info, x_reg_info->Master()); |
| // Redirect 32bit W master storage to 64bit X. |
| info->SetMaster(x_reg_info); |
| // 32bit W should show a single 32-bit mask bit, at first referring to the low half. |
| DCHECK_EQ(info->StorageMask(), 0x1U); |
| } |
| |
| // Don't start allocating temps at r0/s0/d0 or you may clobber return regs in early-exit methods. |
| // TODO: adjust when we roll to hard float calling convention. |
| reg_pool_->next_core_reg_ = 2; |
| reg_pool_->next_sp_reg_ = 0; |
| reg_pool_->next_dp_reg_ = 0; |
| } |
| |
| /* |
| * TUNING: is true leaf? Can't just use METHOD_IS_LEAF to determine as some |
| * instructions might call out to C/assembly helper functions. Until |
| * machinery is in place, always spill lr. |
| */ |
| |
| void Arm64Mir2Lir::AdjustSpillMask() { |
| core_spill_mask_ |= (1 << rs_xLR.GetRegNum()); |
| num_core_spills_++; |
| } |
| |
| /* Clobber all regs that might be used by an external C call */ |
| void Arm64Mir2Lir::ClobberCallerSave() { |
| Clobber(rs_x0); |
| Clobber(rs_x1); |
| Clobber(rs_x2); |
| Clobber(rs_x3); |
| Clobber(rs_x4); |
| Clobber(rs_x5); |
| Clobber(rs_x6); |
| Clobber(rs_x7); |
| Clobber(rs_x8); |
| Clobber(rs_x9); |
| Clobber(rs_x10); |
| Clobber(rs_x11); |
| Clobber(rs_x12); |
| Clobber(rs_x13); |
| Clobber(rs_x14); |
| Clobber(rs_x15); |
| Clobber(rs_x16); |
| Clobber(rs_x17); |
| Clobber(rs_x30); |
| |
| Clobber(rs_f0); |
| Clobber(rs_f1); |
| Clobber(rs_f2); |
| Clobber(rs_f3); |
| Clobber(rs_f4); |
| Clobber(rs_f5); |
| Clobber(rs_f6); |
| Clobber(rs_f7); |
| Clobber(rs_f16); |
| Clobber(rs_f17); |
| Clobber(rs_f18); |
| Clobber(rs_f19); |
| Clobber(rs_f20); |
| Clobber(rs_f21); |
| Clobber(rs_f22); |
| Clobber(rs_f23); |
| Clobber(rs_f24); |
| Clobber(rs_f25); |
| Clobber(rs_f26); |
| Clobber(rs_f27); |
| Clobber(rs_f28); |
| Clobber(rs_f29); |
| Clobber(rs_f30); |
| Clobber(rs_f31); |
| } |
| |
| RegLocation Arm64Mir2Lir::GetReturnWideAlt() { |
| RegLocation res = LocCReturnWide(); |
| res.reg.SetReg(rx2); |
| res.reg.SetHighReg(rx3); |
| Clobber(rs_x2); |
| Clobber(rs_x3); |
| MarkInUse(rs_x2); |
| MarkInUse(rs_x3); |
| MarkWide(res.reg); |
| return res; |
| } |
| |
| RegLocation Arm64Mir2Lir::GetReturnAlt() { |
| RegLocation res = LocCReturn(); |
| res.reg.SetReg(rx1); |
| Clobber(rs_x1); |
| MarkInUse(rs_x1); |
| return res; |
| } |
| |
| /* To be used when explicitly managing register use */ |
| void Arm64Mir2Lir::LockCallTemps() { |
| // TODO: needs cleanup. |
| LockTemp(rs_x0); |
| LockTemp(rs_x1); |
| LockTemp(rs_x2); |
| LockTemp(rs_x3); |
| LockTemp(rs_x4); |
| LockTemp(rs_x5); |
| LockTemp(rs_x6); |
| LockTemp(rs_x7); |
| LockTemp(rs_f0); |
| LockTemp(rs_f1); |
| LockTemp(rs_f2); |
| LockTemp(rs_f3); |
| LockTemp(rs_f4); |
| LockTemp(rs_f5); |
| LockTemp(rs_f6); |
| LockTemp(rs_f7); |
| } |
| |
| /* To be used when explicitly managing register use */ |
| void Arm64Mir2Lir::FreeCallTemps() { |
| // TODO: needs cleanup. |
| FreeTemp(rs_x0); |
| FreeTemp(rs_x1); |
| FreeTemp(rs_x2); |
| FreeTemp(rs_x3); |
| FreeTemp(rs_x4); |
| FreeTemp(rs_x5); |
| FreeTemp(rs_x6); |
| FreeTemp(rs_x7); |
| FreeTemp(rs_f0); |
| FreeTemp(rs_f1); |
| FreeTemp(rs_f2); |
| FreeTemp(rs_f3); |
| FreeTemp(rs_f4); |
| FreeTemp(rs_f5); |
| FreeTemp(rs_f6); |
| FreeTemp(rs_f7); |
| } |
| |
| RegStorage Arm64Mir2Lir::LoadHelper(ThreadOffset<4> offset) { |
| UNIMPLEMENTED(FATAL) << "Should not be called."; |
| return RegStorage::InvalidReg(); |
| } |
| |
| RegStorage Arm64Mir2Lir::LoadHelper(ThreadOffset<8> offset) { |
| // TODO(Arm64): use LoadWordDisp instead. |
| // e.g. LoadWordDisp(rs_rA64_SELF, offset.Int32Value(), rs_rA64_LR); |
| LoadBaseDisp(rs_xSELF, offset.Int32Value(), rs_xLR, k64, kNotVolatile); |
| return rs_xLR; |
| } |
| |
| LIR* Arm64Mir2Lir::CheckSuspendUsingLoad() { |
| RegStorage tmp = rs_x0; |
| LoadWordDisp(rs_xSELF, Thread::ThreadSuspendTriggerOffset<8>().Int32Value(), tmp); |
| LIR* load2 = LoadWordDisp(tmp, 0, tmp); |
| return load2; |
| } |
| |
| uint64_t Arm64Mir2Lir::GetTargetInstFlags(int opcode) { |
| DCHECK(!IsPseudoLirOp(opcode)); |
| return Arm64Mir2Lir::EncodingMap[UNWIDE(opcode)].flags; |
| } |
| |
| const char* Arm64Mir2Lir::GetTargetInstName(int opcode) { |
| DCHECK(!IsPseudoLirOp(opcode)); |
| return Arm64Mir2Lir::EncodingMap[UNWIDE(opcode)].name; |
| } |
| |
| const char* Arm64Mir2Lir::GetTargetInstFmt(int opcode) { |
| DCHECK(!IsPseudoLirOp(opcode)); |
| return Arm64Mir2Lir::EncodingMap[UNWIDE(opcode)].fmt; |
| } |
| |
| RegStorage Arm64Mir2Lir::InToRegStorageArm64Mapper::GetNextReg(bool is_double_or_float, |
| bool is_wide, |
| bool is_ref) { |
| const RegStorage coreArgMappingToPhysicalReg[] = |
| {rs_x1, rs_x2, rs_x3, rs_x4, rs_x5, rs_x6, rs_x7}; |
| const int coreArgMappingToPhysicalRegSize = |
| sizeof(coreArgMappingToPhysicalReg) / sizeof(RegStorage); |
| const RegStorage fpArgMappingToPhysicalReg[] = |
| {rs_f0, rs_f1, rs_f2, rs_f3, rs_f4, rs_f5, rs_f6, rs_f7}; |
| const int fpArgMappingToPhysicalRegSize = |
| sizeof(fpArgMappingToPhysicalReg) / sizeof(RegStorage); |
| |
| RegStorage result = RegStorage::InvalidReg(); |
| if (is_double_or_float) { |
| if (cur_fp_reg_ < fpArgMappingToPhysicalRegSize) { |
| DCHECK(!is_ref); |
| result = fpArgMappingToPhysicalReg[cur_fp_reg_++]; |
| if (result.Valid()) { |
| // TODO: switching between widths remains a bit ugly. Better way? |
| int res_reg = result.GetReg(); |
| result = is_wide ? RegStorage::FloatSolo64(res_reg) : RegStorage::FloatSolo32(res_reg); |
| } |
| } |
| } else { |
| if (cur_core_reg_ < coreArgMappingToPhysicalRegSize) { |
| result = coreArgMappingToPhysicalReg[cur_core_reg_++]; |
| if (result.Valid()) { |
| // TODO: switching between widths remains a bit ugly. Better way? |
| int res_reg = result.GetReg(); |
| DCHECK(!(is_wide && is_ref)); |
| result = (is_wide || is_ref) ? RegStorage::Solo64(res_reg) : RegStorage::Solo32(res_reg); |
| } |
| } |
| } |
| return result; |
| } |
| |
| RegStorage Arm64Mir2Lir::InToRegStorageMapping::Get(int in_position) { |
| DCHECK(IsInitialized()); |
| auto res = mapping_.find(in_position); |
| return res != mapping_.end() ? res->second : RegStorage::InvalidReg(); |
| } |
| |
| void Arm64Mir2Lir::InToRegStorageMapping::Initialize(RegLocation* arg_locs, int count, |
| InToRegStorageMapper* mapper) { |
| DCHECK(mapper != nullptr); |
| max_mapped_in_ = -1; |
| is_there_stack_mapped_ = false; |
| for (int in_position = 0; in_position < count; in_position++) { |
| RegStorage reg = mapper->GetNextReg(arg_locs[in_position].fp, |
| arg_locs[in_position].wide, |
| arg_locs[in_position].ref); |
| if (reg.Valid()) { |
| mapping_[in_position] = reg; |
| if (arg_locs[in_position].wide) { |
| // We covered 2 args, so skip the next one |
| in_position++; |
| } |
| max_mapped_in_ = std::max(max_mapped_in_, in_position); |
| } else { |
| is_there_stack_mapped_ = true; |
| } |
| } |
| initialized_ = true; |
| } |
| |
| |
| // Deprecate. Use the new mechanism. |
| // TODO(Arm64): reuse info in QuickArgumentVisitor? |
| static RegStorage GetArgPhysicalReg(RegLocation* loc, int* num_gpr_used, int* num_fpr_used, |
| OpSize* op_size) { |
| if (loc->fp) { |
| int n = *num_fpr_used; |
| if (n < 8) { |
| *num_fpr_used = n + 1; |
| RegStorage::RegStorageKind reg_kind; |
| if (loc->wide) { |
| *op_size = kDouble; |
| reg_kind = RegStorage::k64BitSolo; |
| } else { |
| *op_size = kSingle; |
| reg_kind = RegStorage::k32BitSolo; |
| } |
| return RegStorage(RegStorage::kValid | reg_kind | RegStorage::kFloatingPoint | n); |
| } |
| } else { |
| int n = *num_gpr_used; |
| if (n < 8) { |
| *num_gpr_used = n + 1; |
| if (loc->wide || loc->ref) { |
| *op_size = k64; |
| return RegStorage::Solo64(n); |
| } else { |
| *op_size = k32; |
| return RegStorage::Solo32(n); |
| } |
| } |
| } |
| *op_size = kWord; |
| return RegStorage::InvalidReg(); |
| } |
| |
| RegStorage Arm64Mir2Lir::GetArgMappingToPhysicalReg(int arg_num) { |
| if (!in_to_reg_storage_mapping_.IsInitialized()) { |
| int start_vreg = cu_->num_dalvik_registers - cu_->num_ins; |
| RegLocation* arg_locs = &mir_graph_->reg_location_[start_vreg]; |
| |
| InToRegStorageArm64Mapper mapper; |
| in_to_reg_storage_mapping_.Initialize(arg_locs, cu_->num_ins, &mapper); |
| } |
| return in_to_reg_storage_mapping_.Get(arg_num); |
| } |
| |
| |
| /* |
| * If there are any ins passed in registers that have not been promoted |
| * to a callee-save register, flush them to the frame. Perform initial |
| * assignment of promoted arguments. |
| * |
| * ArgLocs is an array of location records describing the incoming arguments |
| * with one location record per word of argument. |
| */ |
| void Arm64Mir2Lir::FlushIns(RegLocation* ArgLocs, RegLocation rl_method) { |
| int num_gpr_used = 1; |
| int num_fpr_used = 0; |
| |
| /* |
| * Dummy up a RegLocation for the incoming StackReference<mirror::ArtMethod> |
| * It will attempt to keep kArg0 live (or copy it to home location |
| * if promoted). |
| */ |
| RegLocation rl_src = rl_method; |
| rl_src.location = kLocPhysReg; |
| rl_src.reg = TargetReg(kArg0, kRef); |
| rl_src.home = false; |
| MarkLive(rl_src); |
| StoreValue(rl_method, rl_src); |
| // If Method* has been promoted, explicitly flush |
| if (rl_method.location == kLocPhysReg) { |
| StoreRefDisp(TargetPtrReg(kSp), 0, rl_src.reg, kNotVolatile); |
| } |
| |
| if (cu_->num_ins == 0) { |
| return; |
| } |
| |
| // Handle dalvik registers. |
| ScopedMemRefType mem_ref_type(this, ResourceMask::kDalvikReg); |
| int start_vreg = cu_->num_dalvik_registers - cu_->num_ins; |
| for (int i = 0; i < cu_->num_ins; i++) { |
| RegLocation* t_loc = &ArgLocs[i]; |
| OpSize op_size; |
| RegStorage reg = GetArgPhysicalReg(t_loc, &num_gpr_used, &num_fpr_used, &op_size); |
| |
| if (reg.Valid()) { |
| // If arriving in register. |
| |
| // We have already updated the arg location with promoted info |
| // so we can be based on it. |
| if (t_loc->location == kLocPhysReg) { |
| // Just copy it. |
| OpRegCopy(t_loc->reg, reg); |
| } else { |
| // Needs flush. |
| if (t_loc->ref) { |
| StoreRefDisp(TargetPtrReg(kSp), SRegOffset(start_vreg + i), reg, kNotVolatile); |
| } else { |
| StoreBaseDisp(TargetPtrReg(kSp), SRegOffset(start_vreg + i), reg, t_loc->wide ? k64 : k32, |
| kNotVolatile); |
| } |
| } |
| } else { |
| // If arriving in frame & promoted. |
| if (t_loc->location == kLocPhysReg) { |
| if (t_loc->ref) { |
| LoadRefDisp(TargetPtrReg(kSp), SRegOffset(start_vreg + i), t_loc->reg, kNotVolatile); |
| } else { |
| LoadBaseDisp(TargetPtrReg(kSp), SRegOffset(start_vreg + i), t_loc->reg, |
| t_loc->wide ? k64 : k32, kNotVolatile); |
| } |
| } |
| } |
| if (t_loc->wide) { |
| // Increment i to skip the next one. |
| i++; |
| } |
| // if ((v_map->core_location == kLocPhysReg) && !t_loc->fp) { |
| // OpRegCopy(RegStorage::Solo32(v_map->core_reg), reg); |
| // } else if ((v_map->fp_location == kLocPhysReg) && t_loc->fp) { |
| // OpRegCopy(RegStorage::Solo32(v_map->fp_reg), reg); |
| // } else { |
| // StoreBaseDisp(TargetReg(kSp), SRegOffset(start_vreg + i), reg, op_size, kNotVolatile); |
| // if (reg.Is64Bit()) { |
| // if (SRegOffset(start_vreg + i) + 4 != SRegOffset(start_vreg + i + 1)) { |
| // LOG(FATAL) << "64 bit value stored in non-consecutive 4 bytes slots"; |
| // } |
| // i += 1; |
| // } |
| // } |
| // } else { |
| // // If arriving in frame & promoted |
| // if (v_map->core_location == kLocPhysReg) { |
| // LoadWordDisp(TargetReg(kSp), SRegOffset(start_vreg + i), |
| // RegStorage::Solo32(v_map->core_reg)); |
| // } |
| // if (v_map->fp_location == kLocPhysReg) { |
| // LoadWordDisp(TargetReg(kSp), SRegOffset(start_vreg + i), RegStorage::Solo32(v_map->fp_reg)); |
| // } |
| } |
| } |
| |
| /* |
| * Load up to 5 arguments, the first three of which will be in |
| * kArg1 .. kArg3. On entry kArg0 contains the current method pointer, |
| * and as part of the load sequence, it must be replaced with |
| * the target method pointer. |
| */ |
| int Arm64Mir2Lir::GenDalvikArgsNoRange(CallInfo* info, |
| int call_state, LIR** pcrLabel, NextCallInsn next_call_insn, |
| const MethodReference& target_method, |
| uint32_t vtable_idx, uintptr_t direct_code, |
| uintptr_t direct_method, InvokeType type, bool skip_this) { |
| return GenDalvikArgsRange(info, |
| call_state, pcrLabel, next_call_insn, |
| target_method, |
| vtable_idx, direct_code, |
| direct_method, type, skip_this); |
| } |
| |
| /* |
| * May have 0+ arguments (also used for jumbo). Note that |
| * source virtual registers may be in physical registers, so may |
| * need to be flushed to home location before copying. This |
| * applies to arg3 and above (see below). |
| * |
| * FIXME: update comments. |
| * |
| * Two general strategies: |
| * If < 20 arguments |
| * Pass args 3-18 using vldm/vstm block copy |
| * Pass arg0, arg1 & arg2 in kArg1-kArg3 |
| * If 20+ arguments |
| * Pass args arg19+ using memcpy block copy |
| * Pass arg0, arg1 & arg2 in kArg1-kArg3 |
| * |
| */ |
| int Arm64Mir2Lir::GenDalvikArgsRange(CallInfo* info, int call_state, |
| LIR** pcrLabel, NextCallInsn next_call_insn, |
| const MethodReference& target_method, |
| uint32_t vtable_idx, uintptr_t direct_code, |
| uintptr_t direct_method, InvokeType type, bool skip_this) { |
| /* If no arguments, just return */ |
| if (info->num_arg_words == 0) |
| return call_state; |
| |
| const int start_index = skip_this ? 1 : 0; |
| |
| InToRegStorageArm64Mapper mapper; |
| InToRegStorageMapping in_to_reg_storage_mapping; |
| in_to_reg_storage_mapping.Initialize(info->args, info->num_arg_words, &mapper); |
| const int last_mapped_in = in_to_reg_storage_mapping.GetMaxMappedIn(); |
| int regs_left_to_pass_via_stack = info->num_arg_words - (last_mapped_in + 1); |
| |
| // First of all, check whether it makes sense to use bulk copying. |
| // Bulk copying is done only for the range case. |
| // TODO: make a constant instead of 2 |
| if (info->is_range && regs_left_to_pass_via_stack >= 2) { |
| // Scan the rest of the args - if in phys_reg flush to memory |
| for (int next_arg = last_mapped_in + 1; next_arg < info->num_arg_words;) { |
| RegLocation loc = info->args[next_arg]; |
| if (loc.wide) { |
| loc = UpdateLocWide(loc); |
| if (loc.location == kLocPhysReg) { |
| ScopedMemRefType mem_ref_type(this, ResourceMask::kDalvikReg); |
| StoreBaseDisp(TargetPtrReg(kSp), SRegOffset(loc.s_reg_low), loc.reg, k64, kNotVolatile); |
| } |
| next_arg += 2; |
| } else { |
| loc = UpdateLoc(loc); |
| if (loc.location == kLocPhysReg) { |
| ScopedMemRefType mem_ref_type(this, ResourceMask::kDalvikReg); |
| if (loc.ref) { |
| StoreRefDisp(TargetPtrReg(kSp), SRegOffset(loc.s_reg_low), loc.reg, kNotVolatile); |
| } else { |
| StoreBaseDisp(TargetPtrReg(kSp), SRegOffset(loc.s_reg_low), loc.reg, k32, |
| kNotVolatile); |
| } |
| } |
| next_arg++; |
| } |
| } |
| |
| // Logic below assumes that Method pointer is at offset zero from SP. |
| DCHECK_EQ(VRegOffset(static_cast<int>(kVRegMethodPtrBaseReg)), 0); |
| |
| // The rest can be copied together |
| int start_offset = SRegOffset(info->args[last_mapped_in + 1].s_reg_low); |
| int outs_offset = StackVisitor::GetOutVROffset(last_mapped_in + 1, |
| cu_->instruction_set); |
| |
| int current_src_offset = start_offset; |
| int current_dest_offset = outs_offset; |
| |
| // Only davik regs are accessed in this loop; no next_call_insn() calls. |
| ScopedMemRefType mem_ref_type(this, ResourceMask::kDalvikReg); |
| while (regs_left_to_pass_via_stack > 0) { |
| /* |
| * TODO: Improve by adding block copy for large number of arguments. This |
| * should be done, if possible, as a target-depending helper. For now, just |
| * copy a Dalvik vreg at a time. |
| */ |
| // Moving 32-bits via general purpose register. |
| size_t bytes_to_move = sizeof(uint32_t); |
| |
| // Instead of allocating a new temp, simply reuse one of the registers being used |
| // for argument passing. |
| RegStorage temp = TargetReg(kArg3, kNotWide); |
| |
| // Now load the argument VR and store to the outs. |
| Load32Disp(TargetPtrReg(kSp), current_src_offset, temp); |
| Store32Disp(TargetPtrReg(kSp), current_dest_offset, temp); |
| |
| current_src_offset += bytes_to_move; |
| current_dest_offset += bytes_to_move; |
| regs_left_to_pass_via_stack -= (bytes_to_move >> 2); |
| } |
| DCHECK_EQ(regs_left_to_pass_via_stack, 0); |
| } |
| |
| // Now handle rest not registers if they are |
| if (in_to_reg_storage_mapping.IsThereStackMapped()) { |
| RegStorage regWide = TargetReg(kArg3, kWide); |
| for (int i = start_index; i <= last_mapped_in + regs_left_to_pass_via_stack; i++) { |
| RegLocation rl_arg = info->args[i]; |
| rl_arg = UpdateRawLoc(rl_arg); |
| RegStorage reg = in_to_reg_storage_mapping.Get(i); |
| if (!reg.Valid()) { |
| int out_offset = StackVisitor::GetOutVROffset(i, cu_->instruction_set); |
| |
| { |
| ScopedMemRefType mem_ref_type(this, ResourceMask::kDalvikReg); |
| if (rl_arg.wide) { |
| if (rl_arg.location == kLocPhysReg) { |
| StoreBaseDisp(TargetPtrReg(kSp), out_offset, rl_arg.reg, k64, kNotVolatile); |
| } else { |
| LoadValueDirectWideFixed(rl_arg, regWide); |
| StoreBaseDisp(TargetPtrReg(kSp), out_offset, regWide, k64, kNotVolatile); |
| } |
| } else { |
| if (rl_arg.location == kLocPhysReg) { |
| if (rl_arg.ref) { |
| StoreRefDisp(TargetPtrReg(kSp), out_offset, rl_arg.reg, kNotVolatile); |
| } else { |
| StoreBaseDisp(TargetPtrReg(kSp), out_offset, rl_arg.reg, k32, kNotVolatile); |
| } |
| } else { |
| if (rl_arg.ref) { |
| RegStorage regSingle = TargetReg(kArg2, kRef); |
| LoadValueDirectFixed(rl_arg, regSingle); |
| StoreRefDisp(TargetPtrReg(kSp), out_offset, regSingle, kNotVolatile); |
| } else { |
| RegStorage regSingle = TargetReg(kArg2, kNotWide); |
| LoadValueDirectFixed(rl_arg, regSingle); |
| StoreBaseDisp(TargetPtrReg(kSp), out_offset, regSingle, k32, kNotVolatile); |
| } |
| } |
| } |
| } |
| call_state = next_call_insn(cu_, info, call_state, target_method, |
| vtable_idx, direct_code, direct_method, type); |
| } |
| if (rl_arg.wide) { |
| i++; |
| } |
| } |
| } |
| |
| // Finish with mapped registers |
| for (int i = start_index; i <= last_mapped_in; i++) { |
| RegLocation rl_arg = info->args[i]; |
| rl_arg = UpdateRawLoc(rl_arg); |
| RegStorage reg = in_to_reg_storage_mapping.Get(i); |
| if (reg.Valid()) { |
| if (rl_arg.wide) { |
| LoadValueDirectWideFixed(rl_arg, reg); |
| } else { |
| LoadValueDirectFixed(rl_arg, reg); |
| } |
| call_state = next_call_insn(cu_, info, call_state, target_method, vtable_idx, |
| direct_code, direct_method, type); |
| } |
| if (rl_arg.wide) { |
| i++; |
| } |
| } |
| |
| call_state = next_call_insn(cu_, info, call_state, target_method, vtable_idx, |
| direct_code, direct_method, type); |
| if (pcrLabel) { |
| if (cu_->compiler_driver->GetCompilerOptions().GetExplicitNullChecks()) { |
| *pcrLabel = GenExplicitNullCheck(TargetReg(kArg1, kRef), info->opt_flags); |
| } else { |
| *pcrLabel = nullptr; |
| // In lieu of generating a check for kArg1 being null, we need to |
| // perform a load when doing implicit checks. |
| RegStorage tmp = AllocTemp(); |
| Load32Disp(TargetReg(kArg1, kRef), 0, tmp); |
| MarkPossibleNullPointerException(info->opt_flags); |
| FreeTemp(tmp); |
| } |
| } |
| return call_state; |
| } |
| |
| } // namespace art |