blob: 9c11fd322206c33b2eb230f96fa9fe061f08bc82 [file] [log] [blame]
/*
* Copyright (C) 2016 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef ART_COMPILER_UTILS_ARM_ASSEMBLER_ARM_VIXL_H_
#define ART_COMPILER_UTILS_ARM_ASSEMBLER_ARM_VIXL_H_
#include "base/arena_containers.h"
#include "base/logging.h"
#include "constants_arm.h"
#include "offsets.h"
#include "utils/arm/assembler_arm_shared.h"
#include "utils/arm/managed_register_arm.h"
#include "utils/assembler.h"
#include "utils/jni_macro_assembler.h"
// TODO(VIXL): Make VIXL compile with -Wshadow and remove pragmas.
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wshadow"
#include "aarch32/macro-assembler-aarch32.h"
#pragma GCC diagnostic pop
namespace vixl32 = vixl::aarch32;
namespace art {
namespace arm {
class ArmVIXLMacroAssembler FINAL : public vixl32::MacroAssembler {
public:
// Most methods fit in a 1KB code buffer, which results in more optimal alloc/realloc and
// fewer system calls than a larger default capacity.
static constexpr size_t kDefaultCodeBufferCapacity = 1 * KB;
ArmVIXLMacroAssembler()
: vixl32::MacroAssembler(ArmVIXLMacroAssembler::kDefaultCodeBufferCapacity) {}
// The following interfaces can generate CMP+Bcc or Cbz/Cbnz.
// CMP+Bcc are generated by default.
// If a hint is given (is_far_target = false) and rn and label can all fit into Cbz/Cbnz,
// then Cbz/Cbnz is generated.
// Prefer following interfaces to using vixl32::MacroAssembler::Cbz/Cbnz.
// In T32, Cbz/Cbnz instructions have following limitations:
// - Far targets, which are over 126 bytes away, are not supported.
// - Only low registers can be encoded.
// - Backward branches are not supported.
void CompareAndBranchIfZero(vixl32::Register rn,
vixl32::Label* label,
bool is_far_target = true);
void CompareAndBranchIfNonZero(vixl32::Register rn,
vixl32::Label* label,
bool is_far_target = true);
// In T32 some of the instructions (add, mov, etc) outside an IT block
// have only 32-bit encodings. But there are 16-bit flag setting
// versions of these instructions (adds, movs, etc). In most of the
// cases in ART we don't care if the instructions keep flags or not;
// thus we can benefit from smaller code size.
// VIXL will never generate flag setting versions (for example, adds
// for Add macro instruction) unless vixl32::DontCare option is
// explicitly specified. That's why we introduce wrappers to use
// DontCare option by default.
#define WITH_FLAGS_DONT_CARE_RD_RN_OP(func_name) \
void (func_name)(vixl32::Register rd, vixl32::Register rn, const vixl32::Operand& operand) { \
MacroAssembler::func_name(vixl32::DontCare, rd, rn, operand); \
} \
using MacroAssembler::func_name
WITH_FLAGS_DONT_CARE_RD_RN_OP(Adc);
WITH_FLAGS_DONT_CARE_RD_RN_OP(Sub);
WITH_FLAGS_DONT_CARE_RD_RN_OP(Sbc);
WITH_FLAGS_DONT_CARE_RD_RN_OP(Rsb);
WITH_FLAGS_DONT_CARE_RD_RN_OP(Rsc);
WITH_FLAGS_DONT_CARE_RD_RN_OP(Eor);
WITH_FLAGS_DONT_CARE_RD_RN_OP(Orr);
WITH_FLAGS_DONT_CARE_RD_RN_OP(Orn);
WITH_FLAGS_DONT_CARE_RD_RN_OP(And);
WITH_FLAGS_DONT_CARE_RD_RN_OP(Bic);
WITH_FLAGS_DONT_CARE_RD_RN_OP(Asr);
WITH_FLAGS_DONT_CARE_RD_RN_OP(Lsr);
WITH_FLAGS_DONT_CARE_RD_RN_OP(Lsl);
WITH_FLAGS_DONT_CARE_RD_RN_OP(Ror);
#undef WITH_FLAGS_DONT_CARE_RD_RN_OP
#define WITH_FLAGS_DONT_CARE_RD_OP(func_name) \
void (func_name)(vixl32::Register rd, const vixl32::Operand& operand) { \
MacroAssembler::func_name(vixl32::DontCare, rd, operand); \
} \
using MacroAssembler::func_name
WITH_FLAGS_DONT_CARE_RD_OP(Mvn);
WITH_FLAGS_DONT_CARE_RD_OP(Mov);
#undef WITH_FLAGS_DONT_CARE_RD_OP
// The following two functions don't fall into above categories. Overload them separately.
void Rrx(vixl32::Register rd, vixl32::Register rn) {
MacroAssembler::Rrx(vixl32::DontCare, rd, rn);
}
using MacroAssembler::Rrx;
void Mul(vixl32::Register rd, vixl32::Register rn, vixl32::Register rm) {
MacroAssembler::Mul(vixl32::DontCare, rd, rn, rm);
}
using MacroAssembler::Mul;
// TODO: Remove when MacroAssembler::Add(FlagsUpdate, Condition, Register, Register, Operand)
// makes the right decision about 16-bit encodings.
void Add(vixl32::Register rd, vixl32::Register rn, const vixl32::Operand& operand) {
if (rd.Is(rn) && operand.IsPlainRegister()) {
MacroAssembler::Add(rd, rn, operand);
} else {
MacroAssembler::Add(vixl32::DontCare, rd, rn, operand);
}
}
using MacroAssembler::Add;
// These interfaces try to use 16-bit T2 encoding of B instruction.
void B(vixl32::Label* label);
// For B(label), we always try to use Narrow encoding, because 16-bit T2 encoding supports
// jumping within 2KB range. For B(cond, label), because the supported branch range is 256
// bytes; we use the far_target hint to try to use 16-bit T1 encoding for short range jumps.
void B(vixl32::Condition cond, vixl32::Label* label, bool is_far_target = true);
// Use literal for generating double constant if it doesn't fit VMOV encoding.
void Vmov(vixl32::DRegister rd, double imm) {
if (vixl::VFP::IsImmFP64(imm)) {
MacroAssembler::Vmov(rd, imm);
} else {
MacroAssembler::Vldr(rd, imm);
}
}
using MacroAssembler::Vmov;
};
class ArmVIXLAssembler FINAL : public Assembler {
private:
class ArmException;
public:
explicit ArmVIXLAssembler(ArenaAllocator* arena)
: Assembler(arena) {
// Use Thumb2 instruction set.
vixl_masm_.UseT32();
}
virtual ~ArmVIXLAssembler() {}
ArmVIXLMacroAssembler* GetVIXLAssembler() { return &vixl_masm_; }
void FinalizeCode() OVERRIDE;
// Size of generated code.
size_t CodeSize() const OVERRIDE;
const uint8_t* CodeBufferBaseAddress() const OVERRIDE;
// Copy instructions out of assembly buffer into the given region of memory.
void FinalizeInstructions(const MemoryRegion& region) OVERRIDE;
void Bind(Label* label ATTRIBUTE_UNUSED) OVERRIDE {
UNIMPLEMENTED(FATAL) << "Do not use Bind for ARM";
}
void Jump(Label* label ATTRIBUTE_UNUSED) OVERRIDE {
UNIMPLEMENTED(FATAL) << "Do not use Jump for ARM";
}
//
// Heap poisoning.
//
// Poison a heap reference contained in `reg`.
void PoisonHeapReference(vixl32::Register reg);
// Unpoison a heap reference contained in `reg`.
void UnpoisonHeapReference(vixl32::Register reg);
// Poison a heap reference contained in `reg` if heap poisoning is enabled.
void MaybePoisonHeapReference(vixl32::Register reg);
// Unpoison a heap reference contained in `reg` if heap poisoning is enabled.
void MaybeUnpoisonHeapReference(vixl32::Register reg);
// Emit code checking the status of the Marking Register, and aborting
// the program if MR does not match the value stored in the art::Thread
// object.
//
// Argument `temp` is used as a temporary register to generate code.
// Argument `code` is used to identify the different occurrences of
// MaybeGenerateMarkingRegisterCheck and is passed to the BKPT instruction.
void GenerateMarkingRegisterCheck(vixl32::Register temp, int code = 0);
void StoreToOffset(StoreOperandType type,
vixl32::Register reg,
vixl32::Register base,
int32_t offset);
void StoreSToOffset(vixl32::SRegister source, vixl32::Register base, int32_t offset);
void StoreDToOffset(vixl32::DRegister source, vixl32::Register base, int32_t offset);
void LoadImmediate(vixl32::Register dest, int32_t value);
void LoadFromOffset(LoadOperandType type,
vixl32::Register reg,
vixl32::Register base,
int32_t offset);
void LoadSFromOffset(vixl32::SRegister reg, vixl32::Register base, int32_t offset);
void LoadDFromOffset(vixl32::DRegister reg, vixl32::Register base, int32_t offset);
void LoadRegisterList(RegList regs, size_t stack_offset);
void StoreRegisterList(RegList regs, size_t stack_offset);
bool ShifterOperandCanAlwaysHold(uint32_t immediate);
bool ShifterOperandCanHold(Opcode opcode, uint32_t immediate, SetCc set_cc = kCcDontCare);
bool CanSplitLoadStoreOffset(int32_t allowed_offset_bits,
int32_t offset,
/*out*/ int32_t* add_to_base,
/*out*/ int32_t* offset_for_load_store);
int32_t AdjustLoadStoreOffset(int32_t allowed_offset_bits,
vixl32::Register temp,
vixl32::Register base,
int32_t offset);
int32_t GetAllowedLoadOffsetBits(LoadOperandType type);
int32_t GetAllowedStoreOffsetBits(StoreOperandType type);
void AddConstant(vixl32::Register rd, int32_t value);
void AddConstant(vixl32::Register rd, vixl32::Register rn, int32_t value);
void AddConstantInIt(vixl32::Register rd,
vixl32::Register rn,
int32_t value,
vixl32::Condition cond = vixl32::al);
template <typename T>
vixl::aarch32::Literal<T>* CreateLiteralDestroyedWithPool(T value) {
vixl::aarch32::Literal<T>* literal =
new vixl::aarch32::Literal<T>(value,
vixl32::RawLiteral::kPlacedWhenUsed,
vixl32::RawLiteral::kDeletedOnPoolDestruction);
return literal;
}
private:
// VIXL assembler.
ArmVIXLMacroAssembler vixl_masm_;
};
// Thread register declaration.
extern const vixl32::Register tr;
// Marking register declaration.
extern const vixl32::Register mr;
} // namespace arm
} // namespace art
#endif // ART_COMPILER_UTILS_ARM_ASSEMBLER_ARM_VIXL_H_