| /* |
| * Copyright (C) 2011 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "compiler_internals.h" |
| #include "local_value_numbering.h" |
| #include "dataflow_iterator.h" |
| |
| namespace art { |
| |
| static unsigned int Predecessors(BasicBlock* bb) |
| { |
| return bb->predecessors->Size(); |
| } |
| |
| /* Setup a constant value for opcodes thare have the DF_SETS_CONST attribute */ |
| void MIRGraph::SetConstant(int32_t ssa_reg, int value) |
| { |
| is_constant_v_->SetBit(ssa_reg); |
| constant_values_[ssa_reg] = value; |
| } |
| |
| void MIRGraph::SetConstantWide(int ssa_reg, int64_t value) |
| { |
| is_constant_v_->SetBit(ssa_reg); |
| constant_values_[ssa_reg] = Low32Bits(value); |
| constant_values_[ssa_reg + 1] = High32Bits(value); |
| } |
| |
| bool MIRGraph::DoConstantPropogation(BasicBlock* bb) |
| { |
| MIR* mir; |
| |
| for (mir = bb->first_mir_insn; mir != NULL; mir = mir->next) { |
| int df_attributes = oat_data_flow_attributes_[mir->dalvikInsn.opcode]; |
| |
| DecodedInstruction *d_insn = &mir->dalvikInsn; |
| |
| if (!(df_attributes & DF_HAS_DEFS)) continue; |
| |
| /* Handle instructions that set up constants directly */ |
| if (df_attributes & DF_SETS_CONST) { |
| if (df_attributes & DF_DA) { |
| int32_t vB = static_cast<int32_t>(d_insn->vB); |
| switch (d_insn->opcode) { |
| case Instruction::CONST_4: |
| case Instruction::CONST_16: |
| case Instruction::CONST: |
| SetConstant(mir->ssa_rep->defs[0], vB); |
| break; |
| case Instruction::CONST_HIGH16: |
| SetConstant(mir->ssa_rep->defs[0], vB << 16); |
| break; |
| case Instruction::CONST_WIDE_16: |
| case Instruction::CONST_WIDE_32: |
| SetConstantWide(mir->ssa_rep->defs[0], static_cast<int64_t>(vB)); |
| break; |
| case Instruction::CONST_WIDE: |
| SetConstantWide(mir->ssa_rep->defs[0],d_insn->vB_wide); |
| break; |
| case Instruction::CONST_WIDE_HIGH16: |
| SetConstantWide(mir->ssa_rep->defs[0], static_cast<int64_t>(vB) << 48); |
| break; |
| default: |
| break; |
| } |
| } |
| /* Handle instructions that set up constants directly */ |
| } else if (df_attributes & DF_IS_MOVE) { |
| int i; |
| |
| for (i = 0; i < mir->ssa_rep->num_uses; i++) { |
| if (!is_constant_v_->IsBitSet(mir->ssa_rep->uses[i])) break; |
| } |
| /* Move a register holding a constant to another register */ |
| if (i == mir->ssa_rep->num_uses) { |
| SetConstant(mir->ssa_rep->defs[0], constant_values_[mir->ssa_rep->uses[0]]); |
| if (df_attributes & DF_A_WIDE) { |
| SetConstant(mir->ssa_rep->defs[1], constant_values_[mir->ssa_rep->uses[1]]); |
| } |
| } |
| } |
| } |
| /* TODO: implement code to handle arithmetic operations */ |
| return true; |
| } |
| |
| void MIRGraph::PropagateConstants() |
| { |
| is_constant_v_ = new (arena_) ArenaBitVector(arena_, GetNumSSARegs(), false); |
| constant_values_ = static_cast<int*>(arena_->NewMem(sizeof(int) * GetNumSSARegs(), true, |
| ArenaAllocator::kAllocDFInfo)); |
| AllNodesIterator iter(this, false /* not iterative */); |
| for (BasicBlock* bb = iter.Next(); bb != NULL; bb = iter.Next()) { |
| DoConstantPropogation(bb); |
| } |
| } |
| |
| /* Advance to next strictly dominated MIR node in an extended basic block */ |
| static MIR* AdvanceMIR(BasicBlock** p_bb, MIR* mir) |
| { |
| BasicBlock* bb = *p_bb; |
| if (mir != NULL) { |
| mir = mir->next; |
| if (mir == NULL) { |
| bb = bb->fall_through; |
| if ((bb == NULL) || Predecessors(bb) != 1) { |
| mir = NULL; |
| } else { |
| *p_bb = bb; |
| mir = bb->first_mir_insn; |
| } |
| } |
| } |
| return mir; |
| } |
| |
| /* |
| * To be used at an invoke mir. If the logically next mir node represents |
| * a move-result, return it. Else, return NULL. If a move-result exists, |
| * it is required to immediately follow the invoke with no intervening |
| * opcodes or incoming arcs. However, if the result of the invoke is not |
| * used, a move-result may not be present. |
| */ |
| MIR* MIRGraph::FindMoveResult(BasicBlock* bb, MIR* mir) |
| { |
| BasicBlock* tbb = bb; |
| mir = AdvanceMIR(&tbb, mir); |
| while (mir != NULL) { |
| int opcode = mir->dalvikInsn.opcode; |
| if ((mir->dalvikInsn.opcode == Instruction::MOVE_RESULT) || |
| (mir->dalvikInsn.opcode == Instruction::MOVE_RESULT_OBJECT) || |
| (mir->dalvikInsn.opcode == Instruction::MOVE_RESULT_WIDE)) { |
| break; |
| } |
| // Keep going if pseudo op, otherwise terminate |
| if (opcode < kNumPackedOpcodes) { |
| mir = NULL; |
| } else { |
| mir = AdvanceMIR(&tbb, mir); |
| } |
| } |
| return mir; |
| } |
| |
| static BasicBlock* NextDominatedBlock(BasicBlock* bb) |
| { |
| if (bb->block_type == kDead) { |
| return NULL; |
| } |
| DCHECK((bb->block_type == kEntryBlock) || (bb->block_type == kDalvikByteCode) |
| || (bb->block_type == kExitBlock)); |
| bb = bb->fall_through; |
| if (bb == NULL || (Predecessors(bb) != 1)) { |
| return NULL; |
| } |
| DCHECK((bb->block_type == kDalvikByteCode) || (bb->block_type == kExitBlock)); |
| return bb; |
| } |
| |
| static MIR* FindPhi(BasicBlock* bb, int ssa_name) |
| { |
| for (MIR* mir = bb->first_mir_insn; mir != NULL; mir = mir->next) { |
| if (static_cast<int>(mir->dalvikInsn.opcode) == kMirOpPhi) { |
| for (int i = 0; i < mir->ssa_rep->num_uses; i++) { |
| if (mir->ssa_rep->uses[i] == ssa_name) { |
| return mir; |
| } |
| } |
| } |
| } |
| return NULL; |
| } |
| |
| static SelectInstructionKind SelectKind(MIR* mir) |
| { |
| switch (mir->dalvikInsn.opcode) { |
| case Instruction::MOVE: |
| case Instruction::MOVE_OBJECT: |
| case Instruction::MOVE_16: |
| case Instruction::MOVE_OBJECT_16: |
| case Instruction::MOVE_FROM16: |
| case Instruction::MOVE_OBJECT_FROM16: |
| return kSelectMove; |
| case Instruction::CONST: |
| case Instruction::CONST_4: |
| case Instruction::CONST_16: |
| return kSelectConst; |
| case Instruction::GOTO: |
| case Instruction::GOTO_16: |
| case Instruction::GOTO_32: |
| return kSelectGoto; |
| default:; |
| } |
| return kSelectNone; |
| } |
| |
| int MIRGraph::GetSSAUseCount(int s_reg) |
| { |
| return raw_use_counts_.Get(s_reg); |
| } |
| |
| |
| /* Do some MIR-level extended basic block optimizations */ |
| bool MIRGraph::BasicBlockOpt(BasicBlock* bb) |
| { |
| if (bb->block_type == kDead) { |
| return true; |
| } |
| int num_temps = 0; |
| LocalValueNumbering local_valnum(cu_); |
| while (bb != NULL) { |
| for (MIR* mir = bb->first_mir_insn; mir != NULL; mir = mir->next) { |
| // TUNING: use the returned value number for CSE. |
| local_valnum.GetValueNumber(mir); |
| // Look for interesting opcodes, skip otherwise |
| Instruction::Code opcode = mir->dalvikInsn.opcode; |
| switch (opcode) { |
| case Instruction::CMPL_FLOAT: |
| case Instruction::CMPL_DOUBLE: |
| case Instruction::CMPG_FLOAT: |
| case Instruction::CMPG_DOUBLE: |
| case Instruction::CMP_LONG: |
| if ((cu_->disable_opt & (1 << kBranchFusing)) != 0) { |
| // Bitcode doesn't allow this optimization. |
| break; |
| } |
| if (mir->next != NULL) { |
| MIR* mir_next = mir->next; |
| Instruction::Code br_opcode = mir_next->dalvikInsn.opcode; |
| ConditionCode ccode = kCondNv; |
| switch(br_opcode) { |
| case Instruction::IF_EQZ: |
| ccode = kCondEq; |
| break; |
| case Instruction::IF_NEZ: |
| ccode = kCondNe; |
| break; |
| case Instruction::IF_LTZ: |
| ccode = kCondLt; |
| break; |
| case Instruction::IF_GEZ: |
| ccode = kCondGe; |
| break; |
| case Instruction::IF_GTZ: |
| ccode = kCondGt; |
| break; |
| case Instruction::IF_LEZ: |
| ccode = kCondLe; |
| break; |
| default: |
| break; |
| } |
| // Make sure result of cmp is used by next insn and nowhere else |
| if ((ccode != kCondNv) && |
| (mir->ssa_rep->defs[0] == mir_next->ssa_rep->uses[0]) && |
| (GetSSAUseCount(mir->ssa_rep->defs[0]) == 1)) { |
| mir_next->dalvikInsn.arg[0] = ccode; |
| switch(opcode) { |
| case Instruction::CMPL_FLOAT: |
| mir_next->dalvikInsn.opcode = |
| static_cast<Instruction::Code>(kMirOpFusedCmplFloat); |
| break; |
| case Instruction::CMPL_DOUBLE: |
| mir_next->dalvikInsn.opcode = |
| static_cast<Instruction::Code>(kMirOpFusedCmplDouble); |
| break; |
| case Instruction::CMPG_FLOAT: |
| mir_next->dalvikInsn.opcode = |
| static_cast<Instruction::Code>(kMirOpFusedCmpgFloat); |
| break; |
| case Instruction::CMPG_DOUBLE: |
| mir_next->dalvikInsn.opcode = |
| static_cast<Instruction::Code>(kMirOpFusedCmpgDouble); |
| break; |
| case Instruction::CMP_LONG: |
| mir_next->dalvikInsn.opcode = |
| static_cast<Instruction::Code>(kMirOpFusedCmpLong); |
| break; |
| default: LOG(ERROR) << "Unexpected opcode: " << opcode; |
| } |
| mir->dalvikInsn.opcode = static_cast<Instruction::Code>(kMirOpNop); |
| mir_next->ssa_rep->num_uses = mir->ssa_rep->num_uses; |
| mir_next->ssa_rep->uses = mir->ssa_rep->uses; |
| mir_next->ssa_rep->fp_use = mir->ssa_rep->fp_use; |
| mir_next->ssa_rep->num_defs = 0; |
| mir->ssa_rep->num_uses = 0; |
| mir->ssa_rep->num_defs = 0; |
| } |
| } |
| break; |
| case Instruction::GOTO: |
| case Instruction::GOTO_16: |
| case Instruction::GOTO_32: |
| case Instruction::IF_EQ: |
| case Instruction::IF_NE: |
| case Instruction::IF_LT: |
| case Instruction::IF_GE: |
| case Instruction::IF_GT: |
| case Instruction::IF_LE: |
| case Instruction::IF_EQZ: |
| case Instruction::IF_NEZ: |
| case Instruction::IF_LTZ: |
| case Instruction::IF_GEZ: |
| case Instruction::IF_GTZ: |
| case Instruction::IF_LEZ: |
| if (bb->taken->dominates_return) { |
| mir->optimization_flags |= MIR_IGNORE_SUSPEND_CHECK; |
| if (cu_->verbose) { |
| LOG(INFO) << "Suppressed suspend check on branch to return at 0x" << std::hex << mir->offset; |
| } |
| } |
| break; |
| default: |
| break; |
| } |
| // Is this the select pattern? |
| // TODO: flesh out support for Mips and X86. NOTE: llvm's select op doesn't quite work here. |
| // TUNING: expand to support IF_xx compare & branches |
| if (!(cu_->compiler_backend == kPortable) && (cu_->instruction_set == kThumb2) && |
| ((mir->dalvikInsn.opcode == Instruction::IF_EQZ) || |
| (mir->dalvikInsn.opcode == Instruction::IF_NEZ))) { |
| BasicBlock* ft = bb->fall_through; |
| DCHECK(ft != NULL); |
| BasicBlock* ft_ft = ft->fall_through; |
| BasicBlock* ft_tk = ft->taken; |
| |
| BasicBlock* tk = bb->taken; |
| DCHECK(tk != NULL); |
| BasicBlock* tk_ft = tk->fall_through; |
| BasicBlock* tk_tk = tk->taken; |
| |
| /* |
| * In the select pattern, the taken edge goes to a block that unconditionally |
| * transfers to the rejoin block and the fall_though edge goes to a block that |
| * unconditionally falls through to the rejoin block. |
| */ |
| if ((tk_ft == NULL) && (ft_tk == NULL) && (tk_tk == ft_ft) && |
| (Predecessors(tk) == 1) && (Predecessors(ft) == 1)) { |
| /* |
| * Okay - we have the basic diamond shape. At the very least, we can eliminate the |
| * suspend check on the taken-taken branch back to the join point. |
| */ |
| if (SelectKind(tk->last_mir_insn) == kSelectGoto) { |
| tk->last_mir_insn->optimization_flags |= (MIR_IGNORE_SUSPEND_CHECK); |
| } |
| // Are the block bodies something we can handle? |
| if ((ft->first_mir_insn == ft->last_mir_insn) && |
| (tk->first_mir_insn != tk->last_mir_insn) && |
| (tk->first_mir_insn->next == tk->last_mir_insn) && |
| ((SelectKind(ft->first_mir_insn) == kSelectMove) || |
| (SelectKind(ft->first_mir_insn) == kSelectConst)) && |
| (SelectKind(ft->first_mir_insn) == SelectKind(tk->first_mir_insn)) && |
| (SelectKind(tk->last_mir_insn) == kSelectGoto)) { |
| // Almost there. Are the instructions targeting the same vreg? |
| MIR* if_true = tk->first_mir_insn; |
| MIR* if_false = ft->first_mir_insn; |
| // It's possible that the target of the select isn't used - skip those (rare) cases. |
| MIR* phi = FindPhi(tk_tk, if_true->ssa_rep->defs[0]); |
| if ((phi != NULL) && (if_true->dalvikInsn.vA == if_false->dalvikInsn.vA)) { |
| /* |
| * We'll convert the IF_EQZ/IF_NEZ to a SELECT. We need to find the |
| * Phi node in the merge block and delete it (while using the SSA name |
| * of the merge as the target of the SELECT. Delete both taken and |
| * fallthrough blocks, and set fallthrough to merge block. |
| * NOTE: not updating other dataflow info (no longer used at this point). |
| * If this changes, need to update i_dom, etc. here (and in CombineBlocks). |
| */ |
| if (opcode == Instruction::IF_NEZ) { |
| // Normalize. |
| MIR* tmp_mir = if_true; |
| if_true = if_false; |
| if_false = tmp_mir; |
| } |
| mir->dalvikInsn.opcode = static_cast<Instruction::Code>(kMirOpSelect); |
| bool const_form = (SelectKind(if_true) == kSelectConst); |
| if ((SelectKind(if_true) == kSelectMove)) { |
| if (IsConst(if_true->ssa_rep->uses[0]) && |
| IsConst(if_false->ssa_rep->uses[0])) { |
| const_form = true; |
| if_true->dalvikInsn.vB = ConstantValue(if_true->ssa_rep->uses[0]); |
| if_false->dalvikInsn.vB = ConstantValue(if_false->ssa_rep->uses[0]); |
| } |
| } |
| if (const_form) { |
| // "true" set val in vB |
| mir->dalvikInsn.vB = if_true->dalvikInsn.vB; |
| // "false" set val in vC |
| mir->dalvikInsn.vC = if_false->dalvikInsn.vB; |
| } else { |
| DCHECK_EQ(SelectKind(if_true), kSelectMove); |
| DCHECK_EQ(SelectKind(if_false), kSelectMove); |
| int* src_ssa = |
| static_cast<int*>(arena_->NewMem(sizeof(int) * 3, false, |
| ArenaAllocator::kAllocDFInfo)); |
| src_ssa[0] = mir->ssa_rep->uses[0]; |
| src_ssa[1] = if_true->ssa_rep->uses[0]; |
| src_ssa[2] = if_false->ssa_rep->uses[0]; |
| mir->ssa_rep->uses = src_ssa; |
| mir->ssa_rep->num_uses = 3; |
| } |
| mir->ssa_rep->num_defs = 1; |
| mir->ssa_rep->defs = |
| static_cast<int*>(arena_->NewMem(sizeof(int) * 1, false, |
| ArenaAllocator::kAllocDFInfo)); |
| mir->ssa_rep->fp_def = |
| static_cast<bool*>(arena_->NewMem(sizeof(bool) * 1, false, |
| ArenaAllocator::kAllocDFInfo)); |
| mir->ssa_rep->fp_def[0] = if_true->ssa_rep->fp_def[0]; |
| /* |
| * There is usually a Phi node in the join block for our two cases. If the |
| * Phi node only contains our two cases as input, we will use the result |
| * SSA name of the Phi node as our select result and delete the Phi. If |
| * the Phi node has more than two operands, we will arbitrarily use the SSA |
| * name of the "true" path, delete the SSA name of the "false" path from the |
| * Phi node (and fix up the incoming arc list). |
| */ |
| if (phi->ssa_rep->num_uses == 2) { |
| mir->ssa_rep->defs[0] = phi->ssa_rep->defs[0]; |
| phi->dalvikInsn.opcode = static_cast<Instruction::Code>(kMirOpNop); |
| } else { |
| int dead_def = if_false->ssa_rep->defs[0]; |
| int live_def = if_true->ssa_rep->defs[0]; |
| mir->ssa_rep->defs[0] = live_def; |
| int* incoming = reinterpret_cast<int*>(phi->dalvikInsn.vB); |
| for (int i = 0; i < phi->ssa_rep->num_uses; i++) { |
| if (phi->ssa_rep->uses[i] == live_def) { |
| incoming[i] = bb->id; |
| } |
| } |
| for (int i = 0; i < phi->ssa_rep->num_uses; i++) { |
| if (phi->ssa_rep->uses[i] == dead_def) { |
| int last_slot = phi->ssa_rep->num_uses - 1; |
| phi->ssa_rep->uses[i] = phi->ssa_rep->uses[last_slot]; |
| incoming[i] = incoming[last_slot]; |
| } |
| } |
| } |
| phi->ssa_rep->num_uses--; |
| bb->taken = NULL; |
| tk->block_type = kDead; |
| for (MIR* tmir = ft->first_mir_insn; tmir != NULL; tmir = tmir->next) { |
| tmir->dalvikInsn.opcode = static_cast<Instruction::Code>(kMirOpNop); |
| } |
| } |
| } |
| } |
| } |
| } |
| bb = NextDominatedBlock(bb); |
| } |
| |
| if (num_temps > cu_->num_compiler_temps) { |
| cu_->num_compiler_temps = num_temps; |
| } |
| return true; |
| } |
| |
| void MIRGraph::NullCheckEliminationInit(struct BasicBlock* bb) |
| { |
| if (bb->data_flow_info != NULL) { |
| bb->data_flow_info->ending_null_check_v = |
| new (arena_) ArenaBitVector(arena_, GetNumSSARegs(), false, kBitMapNullCheck); |
| } |
| } |
| |
| /* Collect stats on number of checks removed */ |
| void MIRGraph::CountChecks(struct BasicBlock* bb) |
| { |
| if (bb->data_flow_info != NULL) { |
| for (MIR* mir = bb->first_mir_insn; mir != NULL; mir = mir->next) { |
| if (mir->ssa_rep == NULL) { |
| continue; |
| } |
| int df_attributes = oat_data_flow_attributes_[mir->dalvikInsn.opcode]; |
| if (df_attributes & DF_HAS_NULL_CHKS) { |
| checkstats_->null_checks++; |
| if (mir->optimization_flags & MIR_IGNORE_NULL_CHECK) { |
| checkstats_->null_checks_eliminated++; |
| } |
| } |
| if (df_attributes & DF_HAS_RANGE_CHKS) { |
| checkstats_->range_checks++; |
| if (mir->optimization_flags & MIR_IGNORE_RANGE_CHECK) { |
| checkstats_->range_checks_eliminated++; |
| } |
| } |
| } |
| } |
| } |
| |
| /* Try to make common case the fallthrough path */ |
| static bool LayoutBlocks(struct BasicBlock* bb) |
| { |
| // TODO: For now, just looking for direct throws. Consider generalizing for profile feedback |
| if (!bb->explicit_throw) { |
| return false; |
| } |
| BasicBlock* walker = bb; |
| while (true) { |
| // Check termination conditions |
| if ((walker->block_type == kEntryBlock) || (Predecessors(walker) != 1)) { |
| break; |
| } |
| BasicBlock* prev = walker->predecessors->Get(0); |
| if (prev->conditional_branch) { |
| if (prev->fall_through == walker) { |
| // Already done - return |
| break; |
| } |
| DCHECK_EQ(walker, prev->taken); |
| // Got one. Flip it and exit |
| Instruction::Code opcode = prev->last_mir_insn->dalvikInsn.opcode; |
| switch (opcode) { |
| case Instruction::IF_EQ: opcode = Instruction::IF_NE; break; |
| case Instruction::IF_NE: opcode = Instruction::IF_EQ; break; |
| case Instruction::IF_LT: opcode = Instruction::IF_GE; break; |
| case Instruction::IF_GE: opcode = Instruction::IF_LT; break; |
| case Instruction::IF_GT: opcode = Instruction::IF_LE; break; |
| case Instruction::IF_LE: opcode = Instruction::IF_GT; break; |
| case Instruction::IF_EQZ: opcode = Instruction::IF_NEZ; break; |
| case Instruction::IF_NEZ: opcode = Instruction::IF_EQZ; break; |
| case Instruction::IF_LTZ: opcode = Instruction::IF_GEZ; break; |
| case Instruction::IF_GEZ: opcode = Instruction::IF_LTZ; break; |
| case Instruction::IF_GTZ: opcode = Instruction::IF_LEZ; break; |
| case Instruction::IF_LEZ: opcode = Instruction::IF_GTZ; break; |
| default: LOG(FATAL) << "Unexpected opcode " << opcode; |
| } |
| prev->last_mir_insn->dalvikInsn.opcode = opcode; |
| BasicBlock* t_bb = prev->taken; |
| prev->taken = prev->fall_through; |
| prev->fall_through = t_bb; |
| break; |
| } |
| walker = prev; |
| } |
| return false; |
| } |
| |
| /* Combine any basic blocks terminated by instructions that we now know can't throw */ |
| bool MIRGraph::CombineBlocks(struct BasicBlock* bb) |
| { |
| // Loop here to allow combining a sequence of blocks |
| while (true) { |
| // Check termination conditions |
| if ((bb->first_mir_insn == NULL) |
| || (bb->data_flow_info == NULL) |
| || (bb->block_type == kExceptionHandling) |
| || (bb->block_type == kExitBlock) |
| || (bb->block_type == kDead) |
| || ((bb->taken == NULL) || (bb->taken->block_type != kExceptionHandling)) |
| || (bb->successor_block_list.block_list_type != kNotUsed) |
| || (static_cast<int>(bb->last_mir_insn->dalvikInsn.opcode) != kMirOpCheck)) { |
| break; |
| } |
| |
| // Test the kMirOpCheck instruction |
| MIR* mir = bb->last_mir_insn; |
| // Grab the attributes from the paired opcode |
| MIR* throw_insn = mir->meta.throw_insn; |
| int df_attributes = oat_data_flow_attributes_[throw_insn->dalvikInsn.opcode]; |
| bool can_combine = true; |
| if (df_attributes & DF_HAS_NULL_CHKS) { |
| can_combine &= ((throw_insn->optimization_flags & MIR_IGNORE_NULL_CHECK) != 0); |
| } |
| if (df_attributes & DF_HAS_RANGE_CHKS) { |
| can_combine &= ((throw_insn->optimization_flags & MIR_IGNORE_RANGE_CHECK) != 0); |
| } |
| if (!can_combine) { |
| break; |
| } |
| // OK - got one. Combine |
| BasicBlock* bb_next = bb->fall_through; |
| DCHECK(!bb_next->catch_entry); |
| DCHECK_EQ(Predecessors(bb_next), 1U); |
| MIR* t_mir = bb->last_mir_insn->prev; |
| // Overwrite the kOpCheck insn with the paired opcode |
| DCHECK_EQ(bb_next->first_mir_insn, throw_insn); |
| *bb->last_mir_insn = *throw_insn; |
| bb->last_mir_insn->prev = t_mir; |
| // Use the successor info from the next block |
| bb->successor_block_list = bb_next->successor_block_list; |
| // Use the ending block linkage from the next block |
| bb->fall_through = bb_next->fall_through; |
| bb->taken->block_type = kDead; // Kill the unused exception block |
| bb->taken = bb_next->taken; |
| // Include the rest of the instructions |
| bb->last_mir_insn = bb_next->last_mir_insn; |
| /* |
| * If lower-half of pair of blocks to combine contained a return, move the flag |
| * to the newly combined block. |
| */ |
| bb->terminated_by_return = bb_next->terminated_by_return; |
| |
| /* |
| * NOTE: we aren't updating all dataflow info here. Should either make sure this pass |
| * happens after uses of i_dominated, dom_frontier or update the dataflow info here. |
| */ |
| |
| // Kill bb_next and remap now-dead id to parent |
| bb_next->block_type = kDead; |
| block_id_map_.Overwrite(bb_next->id, bb->id); |
| |
| // Now, loop back and see if we can keep going |
| } |
| return false; |
| } |
| |
| /* Eliminate unnecessary null checks for a basic block. */ |
| bool MIRGraph::EliminateNullChecks(struct BasicBlock* bb) |
| { |
| if (bb->data_flow_info == NULL) return false; |
| |
| /* |
| * Set initial state. Be conservative with catch |
| * blocks and start with no assumptions about null check |
| * status (except for "this"). |
| */ |
| if ((bb->block_type == kEntryBlock) | bb->catch_entry) { |
| temp_ssa_register_v_->ClearAllBits(); |
| if ((cu_->access_flags & kAccStatic) == 0) { |
| // If non-static method, mark "this" as non-null |
| int this_reg = cu_->num_dalvik_registers - cu_->num_ins; |
| temp_ssa_register_v_->SetBit(this_reg); |
| } |
| } else { |
| // Starting state is intesection of all incoming arcs |
| GrowableArray<BasicBlock*>::Iterator iter(bb->predecessors); |
| BasicBlock* pred_bb = iter.Next(); |
| DCHECK(pred_bb != NULL); |
| temp_ssa_register_v_->Copy(pred_bb->data_flow_info->ending_null_check_v); |
| while (true) { |
| pred_bb = iter.Next(); |
| if (!pred_bb) break; |
| if ((pred_bb->data_flow_info == NULL) || |
| (pred_bb->data_flow_info->ending_null_check_v == NULL)) { |
| continue; |
| } |
| temp_ssa_register_v_->Intersect(pred_bb->data_flow_info->ending_null_check_v); |
| } |
| } |
| |
| // Walk through the instruction in the block, updating as necessary |
| for (MIR* mir = bb->first_mir_insn; mir != NULL; mir = mir->next) { |
| if (mir->ssa_rep == NULL) { |
| continue; |
| } |
| int df_attributes = oat_data_flow_attributes_[mir->dalvikInsn.opcode]; |
| |
| // Mark target of NEW* as non-null |
| if (df_attributes & DF_NON_NULL_DST) { |
| temp_ssa_register_v_->SetBit(mir->ssa_rep->defs[0]); |
| } |
| |
| // Mark non-null returns from invoke-style NEW* |
| if (df_attributes & DF_NON_NULL_RET) { |
| MIR* next_mir = mir->next; |
| // Next should be an MOVE_RESULT_OBJECT |
| if (next_mir && |
| next_mir->dalvikInsn.opcode == Instruction::MOVE_RESULT_OBJECT) { |
| // Mark as null checked |
| temp_ssa_register_v_->SetBit(next_mir->ssa_rep->defs[0]); |
| } else { |
| if (next_mir) { |
| LOG(WARNING) << "Unexpected opcode following new: " << next_mir->dalvikInsn.opcode; |
| } else if (bb->fall_through) { |
| // Look in next basic block |
| struct BasicBlock* next_bb = bb->fall_through; |
| for (MIR* tmir = next_bb->first_mir_insn; tmir != NULL; |
| tmir =tmir->next) { |
| if (static_cast<int>(tmir->dalvikInsn.opcode) >= static_cast<int>(kMirOpFirst)) { |
| continue; |
| } |
| // First non-pseudo should be MOVE_RESULT_OBJECT |
| if (tmir->dalvikInsn.opcode == Instruction::MOVE_RESULT_OBJECT) { |
| // Mark as null checked |
| temp_ssa_register_v_->SetBit(tmir->ssa_rep->defs[0]); |
| } else { |
| LOG(WARNING) << "Unexpected op after new: " << tmir->dalvikInsn.opcode; |
| } |
| break; |
| } |
| } |
| } |
| } |
| |
| /* |
| * Propagate nullcheck state on register copies (including |
| * Phi pseudo copies. For the latter, nullcheck state is |
| * the "and" of all the Phi's operands. |
| */ |
| if (df_attributes & (DF_NULL_TRANSFER_0 | DF_NULL_TRANSFER_N)) { |
| int tgt_sreg = mir->ssa_rep->defs[0]; |
| int operands = (df_attributes & DF_NULL_TRANSFER_0) ? 1 : |
| mir->ssa_rep->num_uses; |
| bool null_checked = true; |
| for (int i = 0; i < operands; i++) { |
| null_checked &= temp_ssa_register_v_->IsBitSet(mir->ssa_rep->uses[i]); |
| } |
| if (null_checked) { |
| temp_ssa_register_v_->SetBit(tgt_sreg); |
| } |
| } |
| |
| // Already nullchecked? |
| if ((df_attributes & DF_HAS_NULL_CHKS) && !(mir->optimization_flags & MIR_IGNORE_NULL_CHECK)) { |
| int src_idx; |
| if (df_attributes & DF_NULL_CHK_1) { |
| src_idx = 1; |
| } else if (df_attributes & DF_NULL_CHK_2) { |
| src_idx = 2; |
| } else { |
| src_idx = 0; |
| } |
| int src_sreg = mir->ssa_rep->uses[src_idx]; |
| if (temp_ssa_register_v_->IsBitSet(src_sreg)) { |
| // Eliminate the null check |
| mir->optimization_flags |= MIR_IGNORE_NULL_CHECK; |
| } else { |
| // Mark s_reg as null-checked |
| temp_ssa_register_v_->SetBit(src_sreg); |
| } |
| } |
| } |
| |
| // Did anything change? |
| bool changed = !temp_ssa_register_v_->Equal(bb->data_flow_info->ending_null_check_v); |
| if (changed) { |
| bb->data_flow_info->ending_null_check_v->Copy(temp_ssa_register_v_); |
| } |
| return changed; |
| } |
| |
| void MIRGraph::NullCheckElimination() |
| { |
| if (!(cu_->disable_opt & (1 << kNullCheckElimination))) { |
| DCHECK(temp_ssa_register_v_ != NULL); |
| AllNodesIterator iter(this, false /* not iterative */); |
| for (BasicBlock* bb = iter.Next(); bb != NULL; bb = iter.Next()) { |
| NullCheckEliminationInit(bb); |
| } |
| PreOrderDfsIterator iter2(this, true /* iterative */); |
| bool change = false; |
| for (BasicBlock* bb = iter2.Next(change); bb != NULL; bb = iter2.Next(change)) { |
| change = EliminateNullChecks(bb); |
| } |
| } |
| if (cu_->enable_debug & (1 << kDebugDumpCFG)) { |
| DumpCFG("/sdcard/4_post_nce_cfg/", false); |
| } |
| } |
| |
| void MIRGraph::BasicBlockCombine() |
| { |
| PreOrderDfsIterator iter(this, false /* not iterative */); |
| for (BasicBlock* bb = iter.Next(); bb != NULL; bb = iter.Next()) { |
| CombineBlocks(bb); |
| } |
| if (cu_->enable_debug & (1 << kDebugDumpCFG)) { |
| DumpCFG("/sdcard/5_post_bbcombine_cfg/", false); |
| } |
| } |
| |
| void MIRGraph::CodeLayout() |
| { |
| if (cu_->enable_debug & (1 << kDebugVerifyDataflow)) { |
| VerifyDataflow(); |
| } |
| AllNodesIterator iter(this, false /* not iterative */); |
| for (BasicBlock* bb = iter.Next(); bb != NULL; bb = iter.Next()) { |
| LayoutBlocks(bb); |
| } |
| if (cu_->enable_debug & (1 << kDebugDumpCFG)) { |
| DumpCFG("/sdcard/2_post_layout_cfg/", true); |
| } |
| } |
| |
| void MIRGraph::DumpCheckStats() |
| { |
| Checkstats* stats = |
| static_cast<Checkstats*>(arena_->NewMem(sizeof(Checkstats), true, |
| ArenaAllocator::kAllocDFInfo)); |
| checkstats_ = stats; |
| AllNodesIterator iter(this, false /* not iterative */); |
| for (BasicBlock* bb = iter.Next(); bb != NULL; bb = iter.Next()) { |
| CountChecks(bb); |
| } |
| if (stats->null_checks > 0) { |
| float eliminated = static_cast<float>(stats->null_checks_eliminated); |
| float checks = static_cast<float>(stats->null_checks); |
| LOG(INFO) << "Null Checks: " << PrettyMethod(cu_->method_idx, *cu_->dex_file) << " " |
| << stats->null_checks_eliminated << " of " << stats->null_checks << " -> " |
| << (eliminated/checks) * 100.0 << "%"; |
| } |
| if (stats->range_checks > 0) { |
| float eliminated = static_cast<float>(stats->range_checks_eliminated); |
| float checks = static_cast<float>(stats->range_checks); |
| LOG(INFO) << "Range Checks: " << PrettyMethod(cu_->method_idx, *cu_->dex_file) << " " |
| << stats->range_checks_eliminated << " of " << stats->range_checks << " -> " |
| << (eliminated/checks) * 100.0 << "%"; |
| } |
| } |
| |
| bool MIRGraph::BuildExtendedBBList(struct BasicBlock* bb) |
| { |
| if (bb->visited) return false; |
| if (!((bb->block_type == kEntryBlock) || (bb->block_type == kDalvikByteCode) |
| || (bb->block_type == kExitBlock))) { |
| // Ignore special blocks |
| bb->visited = true; |
| return false; |
| } |
| // Must be head of extended basic block. |
| BasicBlock* start_bb = bb; |
| extended_basic_blocks_.push_back(bb); |
| bool terminated_by_return = false; |
| // Visit blocks strictly dominated by this head. |
| while (bb != NULL) { |
| bb->visited = true; |
| terminated_by_return |= bb->terminated_by_return; |
| bb = NextDominatedBlock(bb); |
| } |
| if (terminated_by_return) { |
| // This extended basic block contains a return, so mark all members. |
| bb = start_bb; |
| while (bb != NULL) { |
| bb->dominates_return = true; |
| bb = NextDominatedBlock(bb); |
| } |
| } |
| return false; // Not iterative - return value will be ignored |
| } |
| |
| |
| void MIRGraph::BasicBlockOptimization() |
| { |
| if (!(cu_->disable_opt & (1 << kBBOpt))) { |
| DCHECK_EQ(cu_->num_compiler_temps, 0); |
| // Mark all blocks as not visited |
| AllNodesIterator iter(this, false /* not iterative */); |
| for (BasicBlock* bb = iter.Next(); bb != NULL; bb = iter.Next()) { |
| ClearVisitedFlag(bb); |
| } |
| PreOrderDfsIterator iter2(this, false /* not iterative */); |
| for (BasicBlock* bb = iter2.Next(); bb != NULL; bb = iter2.Next()) { |
| BuildExtendedBBList(bb); |
| } |
| // Perform extended basic block optimizations. |
| for (unsigned int i = 0; i < extended_basic_blocks_.size(); i++) { |
| BasicBlockOpt(extended_basic_blocks_[i]); |
| } |
| } |
| if (cu_->enable_debug & (1 << kDebugDumpCFG)) { |
| DumpCFG("/sdcard/6_post_bbo_cfg/", false); |
| } |
| } |
| |
| } // namespace art |