| /* |
| * Copyright (C) 2012 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #ifndef ART_COMPILER_DEX_QUICK_X86_X86_LIR_H_ |
| #define ART_COMPILER_DEX_QUICK_X86_X86_LIR_H_ |
| |
| #include "dex/compiler_internals.h" |
| |
| namespace art { |
| |
| /* |
| * Runtime register conventions. We consider both x86, x86-64 and x32 (32bit mode x86-64). The ABI |
| * has different conventions and we capture those here. Changing something that is callee save and |
| * making it caller save places a burden on up-calls to save/restore the callee save register, |
| * however, there are few registers that are callee save in the ABI. Changing something that is |
| * caller save and making it callee save places a burden on down-calls to save/restore the callee |
| * save register. For these reasons we aim to match native conventions for caller and callee save. |
| * On x86 only the first 4 registers can be used for byte operations, for this reason they are |
| * preferred for temporary scratch registers. |
| * |
| * General Purpose Register: |
| * Native: x86 | x86-64 / x32 | ART x86 | ART x86-64 |
| * r0/eax: caller | caller | caller, Method*, scratch, return value | caller, scratch, return value |
| * r1/ecx: caller | caller, arg4 | caller, arg1, scratch | caller, arg3, scratch |
| * r2/edx: caller | caller, arg3 | caller, arg2, scratch, high half of long return | caller, arg2, scratch |
| * r3/ebx: callEE | callEE | callER, arg3, scratch | callee, promotable |
| * r4/esp: stack pointer |
| * r5/ebp: callee | callee | callee, promotable | callee, promotable |
| * r6/esi: callEE | callER, arg2 | callee, promotable | caller, arg1, scratch |
| * r7/edi: callEE | callER, arg1 | callee, promotable | caller, Method*, scratch |
| * --- x86-64/x32 registers |
| * Native: x86-64 / x32 | ART |
| * r8: caller save, arg5 | caller, arg4, scratch |
| * r9: caller save, arg6 | caller, arg5, scratch |
| * r10: caller save | caller, scratch |
| * r11: caller save | caller, scratch |
| * r12: callee save | callee, available for register promotion (promotable) |
| * r13: callee save | callee, available for register promotion (promotable) |
| * r14: callee save | callee, available for register promotion (promotable) |
| * r15: callee save | callee, available for register promotion (promotable) |
| * |
| * There is no rSELF, instead on x86 fs: has a base address of Thread::Current, whereas on |
| * x86-64/x32 gs: holds it. |
| * |
| * For floating point we don't support CPUs without SSE2 support (ie newer than PIII): |
| * Native: x86 | x86-64 / x32 | ART x86 | ART x86-64 |
| * XMM0: caller | caller, arg1 | caller, float return value | caller, arg1, float return value |
| * XMM1: caller | caller, arg2 | caller, scratch | caller, arg2, scratch |
| * XMM2: caller | caller, arg3 | caller, scratch | caller, arg3, scratch |
| * XMM3: caller | caller, arg4 | caller, scratch | caller, arg4, scratch |
| * XMM4: caller | caller, arg5 | caller, scratch | caller, arg5, scratch |
| * XMM5: caller | caller, arg6 | caller, scratch | caller, arg6, scratch |
| * XMM6: caller | caller, arg7 | caller, scratch | caller, arg7, scratch |
| * XMM7: caller | caller, arg8 | caller, scratch | caller, arg8, scratch |
| * --- x86-64/x32 registers |
| * XMM8 .. 15: caller save available as scratch registers for ART. |
| * |
| * X87 is a necessary evil outside of ART code for x86: |
| * ST0: x86 float/double native return value, caller save |
| * ST1 .. ST7: caller save |
| * |
| * Stack frame diagram (stack grows down, higher addresses at top): |
| * |
| * +------------------------+ |
| * | IN[ins-1] | {Note: resides in caller's frame} |
| * | . | |
| * | IN[0] | |
| * | caller's Method* | |
| * +========================+ {Note: start of callee's frame} |
| * | return address | {pushed by call} |
| * | spill region | {variable sized} |
| * +------------------------+ |
| * | ...filler word... | {Note: used as 2nd word of V[locals-1] if long] |
| * +------------------------+ |
| * | V[locals-1] | |
| * | V[locals-2] | |
| * | . | |
| * | . | |
| * | V[1] | |
| * | V[0] | |
| * +------------------------+ |
| * | 0 to 3 words padding | |
| * +------------------------+ |
| * | OUT[outs-1] | |
| * | OUT[outs-2] | |
| * | . | |
| * | OUT[0] | |
| * | cur_method* | <<== sp w/ 16-byte alignment |
| * +========================+ |
| */ |
| |
| // Offset to distingish FP regs. |
| #define X86_FP_REG_OFFSET 32 |
| // Offset to distinguish DP FP regs. |
| #define X86_FP_DOUBLE (X86_FP_REG_OFFSET + 16) |
| // Offset to distingish the extra regs. |
| #define X86_EXTRA_REG_OFFSET (X86_FP_DOUBLE + 16) |
| // Reg types. |
| #define X86_REGTYPE(x) (x & (X86_FP_REG_OFFSET | X86_FP_DOUBLE)) |
| #define X86_FPREG(x) ((x & X86_FP_REG_OFFSET) == X86_FP_REG_OFFSET) |
| #define X86_EXTRAREG(x) ((x & X86_EXTRA_REG_OFFSET) == X86_EXTRA_REG_OFFSET) |
| #define X86_DOUBLEREG(x) ((x & X86_FP_DOUBLE) == X86_FP_DOUBLE) |
| #define X86_SINGLEREG(x) (X86_FPREG(x) && !X86_DOUBLEREG(x)) |
| |
| /* |
| * Note: the low register of a floating point pair is sufficient to |
| * create the name of a double, but require both names to be passed to |
| * allow for asserts to verify that the pair is consecutive if significant |
| * rework is done in this area. Also, it is a good reminder in the calling |
| * code that reg locations always describe doubles as a pair of singles. |
| */ |
| #define X86_S2D(x, y) ((x) | X86_FP_DOUBLE) |
| /* Mask to strip off fp flags */ |
| #define X86_FP_REG_MASK 0xF |
| |
| // RegisterLocation templates return values (rAX, rAX/rDX or XMM0). |
| // location, wide, defined, const, fp, core, ref, high_word, home, vec_len, low_reg, high_reg, s_reg_low |
| #define X86_LOC_C_RETURN {kLocPhysReg, 0, 0, 0, 0, 0, 0, 0, 1, kVectorNotUsed, rAX, INVALID_REG, INVALID_SREG, INVALID_SREG} |
| #define X86_LOC_C_RETURN_WIDE {kLocPhysReg, 1, 0, 0, 0, 0, 0, 0, 1, kVectorNotUsed, rAX, rDX, INVALID_SREG, INVALID_SREG} |
| #define X86_LOC_C_RETURN_FLOAT {kLocPhysReg, 0, 0, 0, 1, 0, 0, 0, 1, kVectorLength4, fr0, INVALID_REG, INVALID_SREG, INVALID_SREG} |
| #define X86_LOC_C_RETURN_DOUBLE {kLocPhysReg, 1, 0, 0, 1, 0, 0, 0, 1, kVectorLength8, fr0, fr0, INVALID_SREG, INVALID_SREG} |
| |
| enum X86ResourceEncodingPos { |
| kX86GPReg0 = 0, |
| kX86RegSP = 4, |
| kX86FPReg0 = 16, // xmm0 .. xmm7/xmm15. |
| kX86FPRegEnd = 32, |
| kX86RegEnd = kX86FPRegEnd, |
| }; |
| |
| #define ENCODE_X86_REG_LIST(N) (static_cast<uint64_t>(N)) |
| #define ENCODE_X86_REG_SP (1ULL << kX86RegSP) |
| |
| enum X86NativeRegisterPool { |
| r0 = 0, |
| rAX = r0, |
| r1 = 1, |
| rCX = r1, |
| r2 = 2, |
| rDX = r2, |
| r3 = 3, |
| rBX = r3, |
| r4sp = 4, |
| rX86_SP = r4sp, |
| r4sib_no_index = r4sp, |
| r5 = 5, |
| rBP = r5, |
| r5sib_no_base = r5, |
| r6 = 6, |
| rSI = r6, |
| r7 = 7, |
| rDI = r7, |
| #ifndef TARGET_REX_SUPPORT |
| rRET = 8, // fake return address register for core spill mask. |
| #else |
| r8 = 8, |
| r9 = 9, |
| r10 = 10, |
| r11 = 11, |
| r12 = 12, |
| r13 = 13, |
| r14 = 14, |
| r15 = 15, |
| rRET = 16, // fake return address register for core spill mask. |
| #endif |
| fr0 = 0 + X86_FP_REG_OFFSET, |
| fr1 = 1 + X86_FP_REG_OFFSET, |
| fr2 = 2 + X86_FP_REG_OFFSET, |
| fr3 = 3 + X86_FP_REG_OFFSET, |
| fr4 = 4 + X86_FP_REG_OFFSET, |
| fr5 = 5 + X86_FP_REG_OFFSET, |
| fr6 = 6 + X86_FP_REG_OFFSET, |
| fr7 = 7 + X86_FP_REG_OFFSET, |
| fr8 = 8 + X86_FP_REG_OFFSET, |
| fr9 = 9 + X86_FP_REG_OFFSET, |
| fr10 = 10 + X86_FP_REG_OFFSET, |
| fr11 = 11 + X86_FP_REG_OFFSET, |
| fr12 = 12 + X86_FP_REG_OFFSET, |
| fr13 = 13 + X86_FP_REG_OFFSET, |
| fr14 = 14 + X86_FP_REG_OFFSET, |
| fr15 = 15 + X86_FP_REG_OFFSET, |
| }; |
| |
| #define rX86_ARG0 rAX |
| #define rX86_ARG1 rCX |
| #define rX86_ARG2 rDX |
| #define rX86_ARG3 rBX |
| #define rX86_FARG0 rAX |
| #define rX86_FARG1 rCX |
| #define rX86_FARG2 rDX |
| #define rX86_FARG3 rBX |
| #define rX86_RET0 rAX |
| #define rX86_RET1 rDX |
| #define rX86_INVOKE_TGT rAX |
| #define rX86_LR INVALID_REG |
| #define rX86_SUSPEND INVALID_REG |
| #define rX86_SELF INVALID_REG |
| #define rX86_COUNT rCX |
| #define rX86_PC INVALID_REG |
| |
| /* |
| * The following enum defines the list of supported X86 instructions by the |
| * assembler. Their corresponding EncodingMap positions will be defined in |
| * Assemble.cc. |
| */ |
| enum X86OpCode { |
| kX86First = 0, |
| kX8632BitData = kX86First, // data [31..0]. |
| kX86Bkpt, |
| kX86Nop, |
| // Define groups of binary operations |
| // MR - Memory Register - opcode [base + disp], reg |
| // - lir operands - 0: base, 1: disp, 2: reg |
| // AR - Array Register - opcode [base + index * scale + disp], reg |
| // - lir operands - 0: base, 1: index, 2: scale, 3: disp, 4: reg |
| // TR - Thread Register - opcode fs:[disp], reg - where fs: is equal to Thread::Current() |
| // - lir operands - 0: disp, 1: reg |
| // RR - Register Register - opcode reg1, reg2 |
| // - lir operands - 0: reg1, 1: reg2 |
| // RM - Register Memory - opcode reg, [base + disp] |
| // - lir operands - 0: reg, 1: base, 2: disp |
| // RA - Register Array - opcode reg, [base + index * scale + disp] |
| // - lir operands - 0: reg, 1: base, 2: index, 3: scale, 4: disp |
| // RT - Register Thread - opcode reg, fs:[disp] - where fs: is equal to Thread::Current() |
| // - lir operands - 0: reg, 1: disp |
| // RI - Register Immediate - opcode reg, #immediate |
| // - lir operands - 0: reg, 1: immediate |
| // MI - Memory Immediate - opcode [base + disp], #immediate |
| // - lir operands - 0: base, 1: disp, 2: immediate |
| // AI - Array Immediate - opcode [base + index * scale + disp], #immediate |
| // - lir operands - 0: base, 1: index, 2: scale, 3: disp 4: immediate |
| // TI - Thread Immediate - opcode fs:[disp], imm - where fs: is equal to Thread::Current() |
| // - lir operands - 0: disp, 1: imm |
| #define BinaryOpCode(opcode) \ |
| opcode ## 8MR, opcode ## 8AR, opcode ## 8TR, \ |
| opcode ## 8RR, opcode ## 8RM, opcode ## 8RA, opcode ## 8RT, \ |
| opcode ## 8RI, opcode ## 8MI, opcode ## 8AI, opcode ## 8TI, \ |
| opcode ## 16MR, opcode ## 16AR, opcode ## 16TR, \ |
| opcode ## 16RR, opcode ## 16RM, opcode ## 16RA, opcode ## 16RT, \ |
| opcode ## 16RI, opcode ## 16MI, opcode ## 16AI, opcode ## 16TI, \ |
| opcode ## 16RI8, opcode ## 16MI8, opcode ## 16AI8, opcode ## 16TI8, \ |
| opcode ## 32MR, opcode ## 32AR, opcode ## 32TR, \ |
| opcode ## 32RR, opcode ## 32RM, opcode ## 32RA, opcode ## 32RT, \ |
| opcode ## 32RI, opcode ## 32MI, opcode ## 32AI, opcode ## 32TI, \ |
| opcode ## 32RI8, opcode ## 32MI8, opcode ## 32AI8, opcode ## 32TI8 |
| BinaryOpCode(kX86Add), |
| BinaryOpCode(kX86Or), |
| BinaryOpCode(kX86Adc), |
| BinaryOpCode(kX86Sbb), |
| BinaryOpCode(kX86And), |
| BinaryOpCode(kX86Sub), |
| BinaryOpCode(kX86Xor), |
| BinaryOpCode(kX86Cmp), |
| #undef BinaryOpCode |
| kX86Imul16RRI, kX86Imul16RMI, kX86Imul16RAI, |
| kX86Imul32RRI, kX86Imul32RMI, kX86Imul32RAI, |
| kX86Imul32RRI8, kX86Imul32RMI8, kX86Imul32RAI8, |
| kX86Mov8MR, kX86Mov8AR, kX86Mov8TR, |
| kX86Mov8RR, kX86Mov8RM, kX86Mov8RA, kX86Mov8RT, |
| kX86Mov8RI, kX86Mov8MI, kX86Mov8AI, kX86Mov8TI, |
| kX86Mov16MR, kX86Mov16AR, kX86Mov16TR, |
| kX86Mov16RR, kX86Mov16RM, kX86Mov16RA, kX86Mov16RT, |
| kX86Mov16RI, kX86Mov16MI, kX86Mov16AI, kX86Mov16TI, |
| kX86Mov32MR, kX86Mov32AR, kX86Mov32TR, |
| kX86Mov32RR, kX86Mov32RM, kX86Mov32RA, kX86Mov32RT, |
| kX86Mov32RI, kX86Mov32MI, kX86Mov32AI, kX86Mov32TI, |
| kX86Lea32RM, |
| kX86Lea32RA, |
| // RRC - Register Register ConditionCode - cond_opcode reg1, reg2 |
| // - lir operands - 0: reg1, 1: reg2, 2: CC |
| kX86Cmov32RRC, |
| // RC - Register CL - opcode reg, CL |
| // - lir operands - 0: reg, 1: CL |
| // MC - Memory CL - opcode [base + disp], CL |
| // - lir operands - 0: base, 1: disp, 2: CL |
| // AC - Array CL - opcode [base + index * scale + disp], CL |
| // - lir operands - 0: base, 1: index, 2: scale, 3: disp, 4: CL |
| #define BinaryShiftOpCode(opcode) \ |
| opcode ## 8RI, opcode ## 8MI, opcode ## 8AI, \ |
| opcode ## 8RC, opcode ## 8MC, opcode ## 8AC, \ |
| opcode ## 16RI, opcode ## 16MI, opcode ## 16AI, \ |
| opcode ## 16RC, opcode ## 16MC, opcode ## 16AC, \ |
| opcode ## 32RI, opcode ## 32MI, opcode ## 32AI, \ |
| opcode ## 32RC, opcode ## 32MC, opcode ## 32AC |
| BinaryShiftOpCode(kX86Rol), |
| BinaryShiftOpCode(kX86Ror), |
| BinaryShiftOpCode(kX86Rcl), |
| BinaryShiftOpCode(kX86Rcr), |
| BinaryShiftOpCode(kX86Sal), |
| BinaryShiftOpCode(kX86Shr), |
| BinaryShiftOpCode(kX86Sar), |
| #undef BinaryShiftOpcode |
| kX86Cmc, |
| kX86Shld32RRI, |
| kX86Shrd32RRI, |
| #define UnaryOpcode(opcode, reg, mem, array) \ |
| opcode ## 8 ## reg, opcode ## 8 ## mem, opcode ## 8 ## array, \ |
| opcode ## 16 ## reg, opcode ## 16 ## mem, opcode ## 16 ## array, \ |
| opcode ## 32 ## reg, opcode ## 32 ## mem, opcode ## 32 ## array |
| UnaryOpcode(kX86Test, RI, MI, AI), |
| kX86Test32RR, |
| UnaryOpcode(kX86Not, R, M, A), |
| UnaryOpcode(kX86Neg, R, M, A), |
| UnaryOpcode(kX86Mul, DaR, DaM, DaA), |
| UnaryOpcode(kX86Imul, DaR, DaM, DaA), |
| UnaryOpcode(kX86Divmod, DaR, DaM, DaA), |
| UnaryOpcode(kX86Idivmod, DaR, DaM, DaA), |
| kx86Cdq32Da, |
| kX86Bswap32R, |
| kX86Push32R, kX86Pop32R, |
| #undef UnaryOpcode |
| #define Binary0fOpCode(opcode) \ |
| opcode ## RR, opcode ## RM, opcode ## RA |
| Binary0fOpCode(kX86Movsd), |
| kX86MovsdMR, |
| kX86MovsdAR, |
| Binary0fOpCode(kX86Movss), |
| kX86MovssMR, |
| kX86MovssAR, |
| Binary0fOpCode(kX86Cvtsi2sd), // int to double |
| Binary0fOpCode(kX86Cvtsi2ss), // int to float |
| Binary0fOpCode(kX86Cvttsd2si), // truncating double to int |
| Binary0fOpCode(kX86Cvttss2si), // truncating float to int |
| Binary0fOpCode(kX86Cvtsd2si), // rounding double to int |
| Binary0fOpCode(kX86Cvtss2si), // rounding float to int |
| Binary0fOpCode(kX86Ucomisd), // unordered double compare |
| Binary0fOpCode(kX86Ucomiss), // unordered float compare |
| Binary0fOpCode(kX86Comisd), // double compare |
| Binary0fOpCode(kX86Comiss), // float compare |
| Binary0fOpCode(kX86Orps), // or of floating point registers |
| Binary0fOpCode(kX86Xorps), // xor of floating point registers |
| Binary0fOpCode(kX86Addsd), // double add |
| Binary0fOpCode(kX86Addss), // float add |
| Binary0fOpCode(kX86Mulsd), // double multiply |
| Binary0fOpCode(kX86Mulss), // float multiply |
| Binary0fOpCode(kX86Cvtsd2ss), // double to float |
| Binary0fOpCode(kX86Cvtss2sd), // float to double |
| Binary0fOpCode(kX86Subsd), // double subtract |
| Binary0fOpCode(kX86Subss), // float subtract |
| Binary0fOpCode(kX86Divsd), // double divide |
| Binary0fOpCode(kX86Divss), // float divide |
| Binary0fOpCode(kX86Punpckldq), // Interleave low-order double words |
| kX86PsrlqRI, // right shift of floating point registers |
| kX86PsllqRI, // left shift of floating point registers |
| kX86SqrtsdRR, // sqrt of floating point register |
| kX86Fild32M, // push 32-bit integer on x87 stack |
| kX86Fild64M, // push 64-bit integer on x87 stack |
| kX86Fstp32M, // pop top x87 fp stack and do 32-bit store |
| kX86Fstp64M, // pop top x87 fp stack and do 64-bit store |
| Binary0fOpCode(kX86Movups), // load unaligned packed single FP values from xmm2/m128 to xmm1 |
| kX86MovupsMR, kX86MovupsAR, // store unaligned packed single FP values from xmm1 to m128 |
| Binary0fOpCode(kX86Movaps), // load aligned packed single FP values from xmm2/m128 to xmm1 |
| kX86MovapsMR, kX86MovapsAR, // store aligned packed single FP values from xmm1 to m128 |
| kX86MovlpsRM, kX86MovlpsRA, // load packed single FP values from m64 to low quadword of xmm |
| kX86MovlpsMR, kX86MovlpsAR, // store packed single FP values from low quadword of xmm to m64 |
| kX86MovhpsRM, kX86MovhpsRA, // load packed single FP values from m64 to high quadword of xmm |
| kX86MovhpsMR, kX86MovhpsAR, // store packed single FP values from high quadword of xmm to m64 |
| Binary0fOpCode(kX86Movdxr), // move into xmm from gpr |
| kX86MovdrxRR, kX86MovdrxMR, kX86MovdrxAR, // move into reg from xmm |
| kX86Set8R, kX86Set8M, kX86Set8A, // set byte depending on condition operand |
| kX86Mfence, // memory barrier |
| Binary0fOpCode(kX86Imul16), // 16bit multiply |
| Binary0fOpCode(kX86Imul32), // 32bit multiply |
| kX86CmpxchgRR, kX86CmpxchgMR, kX86CmpxchgAR, // compare and exchange |
| kX86LockCmpxchgMR, kX86LockCmpxchgAR, // locked compare and exchange |
| kX86LockCmpxchg8bM, kX86LockCmpxchg8bA, // locked compare and exchange |
| Binary0fOpCode(kX86Movzx8), // zero-extend 8-bit value |
| Binary0fOpCode(kX86Movzx16), // zero-extend 16-bit value |
| Binary0fOpCode(kX86Movsx8), // sign-extend 8-bit value |
| Binary0fOpCode(kX86Movsx16), // sign-extend 16-bit value |
| #undef Binary0fOpCode |
| kX86Jcc8, kX86Jcc32, // jCC rel8/32; lir operands - 0: rel, 1: CC, target assigned |
| kX86Jmp8, kX86Jmp32, // jmp rel8/32; lir operands - 0: rel, target assigned |
| kX86JmpR, // jmp reg; lir operands - 0: reg |
| kX86Jecxz8, // jcexz rel8; jump relative if ECX is zero. |
| kX86CallR, // call reg; lir operands - 0: reg |
| kX86CallM, // call [base + disp]; lir operands - 0: base, 1: disp |
| kX86CallA, // call [base + index * scale + disp] |
| // lir operands - 0: base, 1: index, 2: scale, 3: disp |
| kX86CallT, // call fs:[disp]; fs: is equal to Thread::Current(); lir operands - 0: disp |
| kX86CallI, // call <relative> - 0: disp; Used for core.oat linking only |
| kX86Ret, // ret; no lir operands |
| kX86StartOfMethod, // call 0; pop reg; sub reg, # - generate start of method into reg |
| // lir operands - 0: reg |
| kX86PcRelLoadRA, // mov reg, [base + index * scale + PC relative displacement] |
| // lir operands - 0: reg, 1: base, 2: index, 3: scale, 4: table |
| kX86PcRelAdr, // mov reg, PC relative displacement; lir operands - 0: reg, 1: table |
| kX86RepneScasw, // repne scasw |
| kX86Last |
| }; |
| |
| /* Instruction assembly field_loc kind */ |
| enum X86EncodingKind { |
| kData, // Special case for raw data. |
| kNop, // Special case for variable length nop. |
| kNullary, // Opcode that takes no arguments. |
| kPrefix2Nullary, // Opcode that takes no arguments, but 2 prefixes. |
| kRegOpcode, // Shorter form of R instruction kind (opcode+rd) |
| kReg, kMem, kArray, // R, M and A instruction kinds. |
| kMemReg, kArrayReg, kThreadReg, // MR, AR and TR instruction kinds. |
| kRegReg, kRegMem, kRegArray, kRegThread, // RR, RM, RA and RT instruction kinds. |
| kRegRegStore, // RR following the store modrm reg-reg encoding rather than the load. |
| kRegImm, kMemImm, kArrayImm, kThreadImm, // RI, MI, AI and TI instruction kinds. |
| kRegRegImm, kRegMemImm, kRegArrayImm, // RRI, RMI and RAI instruction kinds. |
| kMovRegImm, // Shorter form move RI. |
| kRegRegImmRev, // RRI with first reg in r/m |
| kShiftRegImm, kShiftMemImm, kShiftArrayImm, // Shift opcode with immediate. |
| kShiftRegCl, kShiftMemCl, kShiftArrayCl, // Shift opcode with register CL. |
| kRegRegReg, kRegRegMem, kRegRegArray, // RRR, RRM, RRA instruction kinds. |
| kRegCond, kMemCond, kArrayCond, // R, M, A instruction kinds following by a condition. |
| kRegRegCond, // RR instruction kind followed by a condition. |
| kJmp, kJcc, kCall, // Branch instruction kinds. |
| kPcRel, // Operation with displacement that is PC relative |
| kMacro, // An instruction composing multiple others |
| kUnimplemented // Encoding used when an instruction isn't yet implemented. |
| }; |
| |
| /* Struct used to define the EncodingMap positions for each X86 opcode */ |
| struct X86EncodingMap { |
| X86OpCode opcode; // e.g. kOpAddRI |
| X86EncodingKind kind; // Used to discriminate in the union below |
| uint64_t flags; |
| struct { |
| uint8_t prefix1; // non-zero => a prefix byte |
| uint8_t prefix2; // non-zero => a second prefix byte |
| uint8_t opcode; // 1 byte opcode |
| uint8_t extra_opcode1; // possible extra opcode byte |
| uint8_t extra_opcode2; // possible second extra opcode byte |
| // 3bit opcode that gets encoded in the register bits of the modrm byte, use determined by the |
| // encoding kind |
| uint8_t modrm_opcode; |
| uint8_t ax_opcode; // non-zero => shorter encoding for AX as a destination |
| uint8_t immediate_bytes; // number of bytes of immediate |
| } skeleton; |
| const char *name; |
| const char* fmt; |
| }; |
| |
| |
| // FIXME: mem barrier type - what do we do for x86? |
| #define kSY 0 |
| #define kST 0 |
| |
| // Offsets of high and low halves of a 64bit value. |
| #define LOWORD_OFFSET 0 |
| #define HIWORD_OFFSET 4 |
| |
| // Segment override instruction prefix used for quick TLS access to Thread::Current(). |
| #define THREAD_PREFIX 0x64 |
| |
| #define IS_SIMM8(v) ((-128 <= (v)) && ((v) <= 127)) |
| #define IS_SIMM16(v) ((-32768 <= (v)) && ((v) <= 32767)) |
| |
| extern X86EncodingMap EncodingMap[kX86Last]; |
| extern X86ConditionCode X86ConditionEncoding(ConditionCode cond); |
| |
| } // namespace art |
| |
| #endif // ART_COMPILER_DEX_QUICK_X86_X86_LIR_H_ |