blob: 2abc1fa262e362bff6b59ffba87ebcbc2f03fe8c [file] [log] [blame]
#!/bin/bash
#
# Copyright (C) 2007 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Set up prog to be the path of this script, including following symlinks,
# and set up progdir to be the fully-qualified pathname of its directory.
prog="$0"
args="$@"
while [ -h "${prog}" ]; do
newProg=`/bin/ls -ld "${prog}"`
newProg=`expr "${newProg}" : ".* -> \(.*\)$"`
if expr "x${newProg}" : 'x/' >/dev/null; then
prog="${newProg}"
else
progdir=`dirname "${prog}"`
prog="${progdir}/${newProg}"
fi
done
oldwd=`pwd`
progdir=`dirname "${prog}"`
cd "${progdir}"
progdir=`pwd`
prog="${progdir}"/`basename "${prog}"`
test_dir="test-$$"
if [ -z "$TMPDIR" ]; then
tmp_dir="/tmp/$USER/${test_dir}"
else
tmp_dir="${TMPDIR}/$USER/${test_dir}"
fi
export JAVA="java"
export JAVAC="javac -g"
export RUN="${progdir}/etc/run-test-jar"
export DEX_LOCATION=/data/run-test/${test_dir}
export NEED_DEX="true"
# If dx was not set by the environment variable, assume it is in the path.
if [ -z "$DX" ]; then
export DX="dx"
fi
# If jasmin was not set by the environment variable, assume it is in the path.
if [ -z "$JASMIN" ]; then
export JASMIN="jasmin"
fi
# If smali was not set by the environment variable, assume it is in the path.
if [ -z "$SMALI" ]; then
export SMALI="smali"
fi
# If dexmerger was not set by the environment variable, assume it is in the path.
if [ -z "$DXMERGER" ]; then
export DXMERGER="dexmerger"
fi
info="info.txt"
build="build"
run="run"
expected="expected.txt"
check_cmd="check"
output="output.txt"
build_output="build-output.txt"
lib="libartd.so"
run_args="--quiet"
prebuild_mode="yes"
target_mode="yes"
dev_mode="no"
update_mode="no"
debug_mode="no"
relocate="yes"
runtime="art"
usage="no"
build_only="no"
suffix64=""
trace="false"
basic_verify="false"
gc_verify="false"
gc_stress="false"
always_clean="no"
have_dex2oat="yes"
have_patchoat="yes"
have_image="yes"
image_suffix=""
pic_image_suffix=""
android_root="/system"
while true; do
if [ "x$1" = "x--host" ]; then
target_mode="no"
DEX_LOCATION=$tmp_dir
run_args="${run_args} --host"
shift
elif [ "x$1" = "x--jvm" ]; then
target_mode="no"
runtime="jvm"
prebuild_mode="no"
NEED_DEX="false"
run_args="${run_args} --jvm"
shift
elif [ "x$1" = "x-O" ]; then
lib="libart.so"
shift
elif [ "x$1" = "x--dalvik" ]; then
lib="libdvm.so"
runtime="dalvik"
shift
elif [ "x$1" = "x--no-dex2oat" ]; then
have_dex2oat="no"
shift
elif [ "x$1" = "x--no-patchoat" ]; then
have_patchoat="no"
shift
elif [ "x$1" = "x--no-image" ]; then
have_image="no"
shift
elif [ "x$1" = "x--pic-image" ]; then
pic_image_suffix="-pic"
shift
elif [ "x$1" = "x--pic-test" ]; then
run_args="${run_args} --pic-test"
shift
elif [ "x$1" = "x--relocate" ]; then
relocate="yes"
shift
elif [ "x$1" = "x--no-relocate" ]; then
relocate="no"
shift
elif [ "x$1" = "x--prebuild" ]; then
run_args="${run_args} --prebuild"
prebuild_mode="yes"
shift;
elif [ "x$1" = "x--no-prebuild" ]; then
run_args="${run_args} --no-prebuild"
prebuild_mode="no"
shift;
elif [ "x$1" = "x--gcverify" ]; then
basic_verify="true"
gc_verify="true"
shift
elif [ "x$1" = "x--gcstress" ]; then
basic_verify="true"
gc_stress="true"
shift
elif [ "x$1" = "x--image" ]; then
shift
image="$1"
run_args="${run_args} --image $image"
shift
elif [ "x$1" = "x-Xcompiler-option" ]; then
shift
option="$1"
run_args="${run_args} -Xcompiler-option $option"
shift
elif [ "x$1" = "x--runtime-option" ]; then
shift
option="$1"
run_args="${run_args} --runtime-option $option"
shift
elif [ "x$1" = "x--gdb-arg" ]; then
shift
gdb_arg="$1"
run_args="${run_args} --gdb-arg $gdb_arg"
shift
elif [ "x$1" = "x--debug" ]; then
run_args="${run_args} --debug"
shift
elif [ "x$1" = "x--gdb" ]; then
run_args="${run_args} --gdb"
dev_mode="yes"
shift
elif [ "x$1" = "x--zygote" ]; then
run_args="${run_args} --zygote"
shift
elif [ "x$1" = "x--interpreter" ]; then
run_args="${run_args} --interpreter"
image_suffix="-interpreter"
shift
elif [ "x$1" = "x--optimizing" ]; then
run_args="${run_args} -Xcompiler-option --compiler-backend=Optimizing"
image_suffix="-optimizing"
shift
elif [ "x$1" = "x--quick" ]; then
run_args="${run_args} -Xcompiler-option --compiler-backend=Quick"
shift
elif [ "x$1" = "x--no-verify" ]; then
run_args="${run_args} --no-verify"
shift
elif [ "x$1" = "x--no-optimize" ]; then
run_args="${run_args} --no-optimize"
shift
elif [ "x$1" = "x--no-precise" ]; then
run_args="${run_args} --no-precise"
shift
elif [ "x$1" = "x--invoke-with" ]; then
shift
what="$1"
if [ "x$what" = "x" ]; then
echo "$0 missing argument to --invoke-with" 1>&2
usage="yes"
break
fi
run_args="${run_args} --invoke-with ${what}"
shift
elif [ "x$1" = "x--dev" ]; then
run_args="${run_args} --dev"
dev_mode="yes"
shift
elif [ "x$1" = "x--build-only" ]; then
build_only="yes"
shift
elif [ "x$1" = "x--output-path" ]; then
shift
tmp_dir=$1
if [ "x$tmp_dir" = "x" ]; then
echo "$0 missing argument to --output-path" 1>&2
usage="yes"
break
fi
shift
elif [ "x$1" = "x--android-root" ]; then
shift
if [ "x$1" = "x" ]; then
echo "$0 missing argument to --android-root" 1>&2
usage="yes"
break
fi
android_root="$1"
run_args="${run_args} --android-root $1"
shift
elif [ "x$1" = "x--update" ]; then
update_mode="yes"
shift
elif [ "x$1" = "x--help" ]; then
usage="yes"
shift
elif [ "x$1" = "x--64" ]; then
run_args="${run_args} --64"
suffix64="64"
shift
elif [ "x$1" = "x--trace" ]; then
trace="true"
shift
elif [ "x$1" = "x--always-clean" ]; then
always_clean="yes"
shift
elif expr "x$1" : "x--" >/dev/null 2>&1; then
echo "unknown $0 option: $1" 1>&2
usage="yes"
break
else
break
fi
done
# tmp_dir may be relative, resolve.
#
# Cannot use realpath, as it does not exist on Mac.
# Cannot us a simple "cd", as the path might not be created yet.
# Cannot use readlink -m, as it does not exist on Mac.
# Fallback to nuclear option:
noncanonical_tmp_dir=$tmp_dir
tmp_dir="`cd $oldwd ; python -c "import os; print os.path.realpath('$tmp_dir')"`"
mkdir -p $tmp_dir
if [ "$basic_verify" = "true" ]; then
run_args="${run_args} --runtime-option -Xgc:preverify --runtime-option -Xgc:postverify"
fi
if [ "$gc_verify" = "true" ]; then
run_args="${run_args} --runtime-option -Xgc:preverify_rosalloc --runtime-option -Xgc:postverify_rosalloc"
fi
if [ "$gc_stress" = "true" ]; then
run_args="${run_args} --runtime-option -Xgc:SS --runtime-option -Xms2m --runtime-option -Xmx2m"
fi
if [ "$trace" = "true" ]; then
run_args="${run_args} --runtime-option -Xmethod-trace --runtime-option -Xmethod-trace-file:${DEX_LOCATION}/trace.bin --runtime-option -Xmethod-trace-file-size:2000000"
fi
# Most interesting target architecture variables are Makefile variables, not environment variables.
# Try to map the suffix64 flag and what we find in ${ANDROID_PRODUCT_OUT}/data/art-test to an architecture name.
function guess_arch_name() {
grep32bit=`ls ${ANDROID_PRODUCT_OUT}/data/art-test | grep -E '^(arm|x86|mips)$'`
grep64bit=`ls ${ANDROID_PRODUCT_OUT}/data/art-test | grep -E '^(arm64|x86_64)$'`
if [ "x${suffix64}" = "x64" ]; then
target_arch_name=${grep64bit}
else
target_arch_name=${grep32bit}
fi
}
if [ "$target_mode" = "no" ]; then
if [ "$runtime" = "jvm" ]; then
if [ "$prebuild_mode" = "yes" ]; then
echo "--prebuild with --jvm is unsupported";
exit 1;
fi
fi
fi
if [ "$have_patchoat" = "no" ]; then
run_args="${run_args} --no-patchoat"
fi
if [ "$have_dex2oat" = "no" ]; then
run_args="${run_args} --no-dex2oat"
fi
if [ ! "$runtime" = "jvm" ]; then
run_args="${run_args} --lib $lib"
fi
if [ "$runtime" = "dalvik" ]; then
if [ "$target_mode" = "no" ]; then
framework="${ANDROID_PRODUCT_OUT}/system/framework"
bpath="${framework}/core.jar:${framework}/conscrypt.jar:${framework}/okhttp.jar:${framework}/core-junit.jar:${framework}/bouncycastle.jar:${framework}/ext.jar"
run_args="${run_args} --boot -Xbootclasspath:${bpath}"
else
true # defaults to using target BOOTCLASSPATH
fi
elif [ "$runtime" = "art" ]; then
if [ "$target_mode" = "no" ]; then
# ANDROID_BUILD_TOP and ANDROID_HOST_OUT are not set in a build environment.
if [ -z "$ANDROID_BUILD_TOP" ]; then
export ANDROID_BUILD_TOP=$oldwd
fi
if [ -z "$ANDROID_HOST_OUT" ]; then
export ANDROID_HOST_OUT=$ANDROID_BUILD_TOP/out/host/linux-x86
fi
run_args="${run_args} --boot ${ANDROID_HOST_OUT}/framework/core${image_suffix}${pic_image_suffix}.art"
run_args="${run_args} --runtime-option -Djava.library.path=${ANDROID_HOST_OUT}/lib${suffix64}"
else
guess_arch_name
run_args="${run_args} --runtime-option -Djava.library.path=/data/art-test/${target_arch_name}"
run_args="${run_args} --boot /data/art-test/core${image_suffix}${pic_image_suffix}.art"
fi
if [ "$relocate" = "yes" ]; then
run_args="${run_args} --relocate"
else
run_args="${run_args} --no-relocate"
fi
fi
if [ "$have_image" = "no" ]; then
if [ "$runtime" != "art" ]; then
echo "--no-image is only supported on the art runtime"
exit 1
fi
if [ "$target_mode" = "no" ]; then
framework="${ANDROID_HOST_OUT}/framework"
bpath_suffix="-hostdex"
else
framework="${android_root}/framework"
bpath_suffix=""
fi
# TODO If the target was compiled WITH_DEXPREOPT=true then these tests will
# fail since these jar files will be stripped.
bpath="${framework}/core-libart${bpath_suffix}.jar"
bpath="${bpath}:${framework}/conscrypt${bpath_suffix}.jar"
bpath="${bpath}:${framework}/okhttp${bpath_suffix}.jar"
bpath="${bpath}:${framework}/core-junit${bpath_suffix}.jar"
bpath="${bpath}:${framework}/bouncycastle${bpath_suffix}.jar"
# Pass down the bootclasspath
run_args="${run_args} --runtime-option -Xbootclasspath:${bpath}"
run_args="${run_args} --no-image"
fi
if [ "$dev_mode" = "yes" -a "$update_mode" = "yes" ]; then
echo "--dev and --update are mutually exclusive" 1>&2
usage="yes"
fi
if [ "$usage" = "no" ]; then
if [ "x$1" = "x" -o "x$1" = "x-" ]; then
test_dir=`basename "$oldwd"`
else
test_dir="$1"
fi
if [ '!' -d "$test_dir" ]; then
td2=`echo ${test_dir}-*`
if [ '!' -d "$td2" ]; then
echo "${test_dir}: no such test directory" 1>&2
usage="yes"
fi
test_dir="$td2"
fi
# Shift to get rid of the test name argument. The rest of the arguments
# will get passed to the test run.
shift
fi
if [ "$usage" = "yes" ]; then
prog=`basename $prog`
(
echo "usage:"
echo " $prog --help Print this message."
echo " $prog [options] [test-name] Run test normally."
echo " $prog --dev [options] [test-name] Development mode" \
"(dumps to stdout)."
echo " $prog --update [options] [test-name] Update mode" \
"(replaces expected.txt)."
echo ' Omitting the test name or specifying "-" will use the' \
"current directory."
echo " Runtime Options:"
echo " -O Run non-debug rather than debug build (off by default)."
echo " -Xcompiler-option Pass an option to the compiler."
echo " --runtime-option Pass an option to the runtime."
echo " --debug Wait for a debugger to attach."
echo " --gdb Run under gdb; incompatible with some tests."
echo " --build-only Build test files only (off by default)."
echo " --interpreter Enable interpreter only mode (off by default)."
echo " --optimizing Enable optimizing compiler (off by default)."
echo " --quick Use Quick compiler (default)."
echo " --no-verify Turn off verification (on by default)."
echo " --no-optimize Turn off optimization (on by default)."
echo " --no-precise Turn off precise GC (on by default)."
echo " --zygote Spawn the process from the Zygote." \
"If used, then the"
echo " other runtime options are ignored."
echo " --no-dex2oat Run as though dex2oat was failing."
echo " --no-patchoat Run as though patchoat was failing."
echo " --prebuild Run dex2oat on the files before starting test. (default)"
echo " --no-prebuild Do not run dex2oat on the files before starting"
echo " the test."
echo " --relocate Force the use of relocating in the test, making"
echo " the image and oat files be relocated to a random"
echo " address before running. (default)"
echo " --no-relocate Force the use of no relocating in the test"
echo " --host Use the host-mode virtual machine."
echo " --invoke-with Pass --invoke-with option to runtime."
echo " --dalvik Use Dalvik (off by default)."
echo " --jvm Use a host-local RI virtual machine."
echo " --output-path [path] Location where to store the build" \
"files."
echo " --64 Run the test in 64-bit mode"
echo " --trace Run with method tracing"
echo " --gcstress Run with gc stress testing"
echo " --gcverify Run with gc verification"
echo " --always-clean Delete the test files even if the test fails."
echo " --android-root [path] The path on target for the android root. (/system by default)."
) 1>&2
exit 1
fi
cd "$test_dir"
test_dir=`pwd`
td_info="${test_dir}/${info}"
td_expected="${test_dir}/${expected}"
if [ ! -r $td_info ]; then
echo "${test_dir}: missing file $td_info" 1>&2
exit 1
fi
if [ ! -r $td_expected ]; then
echo "${test_dir}: missing file $td_expected" 1>&2
exit 1
fi
# copy the test to a temp dir and run it
echo "${test_dir}: building..." 1>&2
rm -rf "$tmp_dir"
cp -Rp "$test_dir" "$tmp_dir"
cd "$tmp_dir"
if [ '!' -r "$build" ]; then
cp "${progdir}/etc/default-build" build
fi
if [ '!' -r "$run" ]; then
cp "${progdir}/etc/default-run" run
fi
if [ '!' -r "$check_cmd" ]; then
cp "${progdir}/etc/default-check" check
fi
chmod 755 "$build"
chmod 755 "$run"
chmod 755 "$check_cmd"
export TEST_NAME=`basename ${test_dir}`
# To cause tests to fail fast, limit the file sizes created by dx, dex2oat and ART output to 2MB.
file_size_limit=2048
if echo "$test_dir" | grep 089; then
file_size_limit=5120
elif echo "$test_dir" | grep 083; then
file_size_limit=5120
fi
if ! ulimit -S "$file_size_limit"; then
echo "ulimit file size setting failed"
fi
good="no"
good_build="yes"
good_run="yes"
if [ "$dev_mode" = "yes" ]; then
"./${build}" 2>&1
build_exit="$?"
echo "build exit status: $build_exit" 1>&2
if [ "$build_exit" = '0' ]; then
echo "${test_dir}: running..." 1>&2
"./${run}" $run_args "$@" 2>&1
run_exit="$?"
echo "run exit status: $run_exit" 1>&2
if [ "$run_exit" = "0" ]; then
good="yes"
fi
fi
elif [ "$update_mode" = "yes" ]; then
"./${build}" >"$build_output" 2>&1
build_exit="$?"
if [ "$build_exit" = '0' ]; then
echo "${test_dir}: running..." 1>&2
"./${run}" $run_args "$@" >"$output" 2>&1
sed -e 's/[[:cntrl:]]$//g' < "$output" >"${td_expected}"
good="yes"
else
cat "$build_output" 1>&2
echo "build exit status: $build_exit" 1>&2
fi
elif [ "$build_only" = "yes" ]; then
good="yes"
"./${build}" >"$build_output" 2>&1
build_exit="$?"
if [ "$build_exit" '!=' '0' ]; then
cp "$build_output" "$output"
echo "build exit status: $build_exit" >>"$output"
diff --strip-trailing-cr -q "$expected" "$output" >/dev/null
if [ "$?" '!=' "0" ]; then
good="no"
echo "BUILD FAILED For ${TEST_NAME}"
fi
fi
# Clean up extraneous files that are not used by tests.
find $tmp_dir -mindepth 1 ! -regex ".*/\(.*jar\|$output\|$expected\)" | xargs rm -rf
exit 0
else
"./${build}" >"$build_output" 2>&1
build_exit="$?"
if [ "$build_exit" = '0' ]; then
echo "${test_dir}: running..." 1>&2
"./${run}" $run_args "$@" >"$output" 2>&1
run_exit="$?"
if [ "$run_exit" != "0" ]; then
echo "run exit status: $run_exit" 1>&2
good_run="no"
else
good_run="yes"
fi
else
good_build="no"
cp "$build_output" "$output"
echo "Failed to build in tmpdir=${tmp_dir} from oldwd=${oldwd} and cwd=`pwd`" >> "$output"
echo "Non-canonical tmpdir was ${noncanonical_tmp_dir}" >> "$output"
echo "Args: ${args}" >> "$output"
echo "build exit status: $build_exit" >> "$output"
max_name_length=$(getconf NAME_MAX ${tmp_dir})
echo "Max filename (NAME_MAX): ${max_name_length}" >> "$output"
max_path_length=$(getconf PATH_MAX ${tmp_dir})
echo "Max pathlength (PATH_MAX): ${max_path_length}" >> "$output"
fi
./$check_cmd "$expected" "$output"
if [ "$?" = "0" ]; then
if [ "$good_build" = "no" -o "$good_run" = "yes" ]; then
# output == expected
good="yes"
echo "${test_dir}: succeeded!" 1>&2
fi
fi
fi
(
if [ "$good" != "yes" -a "$update_mode" != "yes" ]; then
echo "${test_dir}: FAILED!"
echo ' '
echo '#################### info'
cat "${td_info}" | sed 's/^/# /g'
echo '#################### diffs'
diff --strip-trailing-cr -u "$expected" "$output" | tail -n 2000
echo '####################'
echo ' '
fi
) 1>&2
# Clean up test files.
if [ "$always_clean" = "yes" -o "$good" = "yes" ]; then
cd "$oldwd"
rm -rf "$tmp_dir"
if [ "$target_mode" = "yes" -a "$build_exit" = "0" ]; then
adb shell rm -rf $DEX_LOCATION
fi
if [ "$good" = "yes" ]; then
exit 0
fi
fi
(
if [ "$always_clean" = "yes" ]; then
echo "${TEST_NAME} files deleted from host "
if [ "$target_mode" == "yes" ]; then
echo "and from target"
fi
else
echo "${TEST_NAME} files left in ${tmp_dir} on host"
if [ "$target_mode" == "yes" ]; then
echo "and in ${DEX_LOCATION} on target"
fi
fi
) 1>&2
exit 1