| /* |
| * Copyright (C) 2012 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "asm_support_arm.S" |
| |
| #include "arch/quick_alloc_entrypoints.S" |
| |
| /* Deliver the given exception */ |
| .extern artDeliverExceptionFromCode |
| /* Deliver an exception pending on a thread */ |
| .extern artDeliverPendingException |
| |
| /* |
| * Macro that sets up the callee save frame to conform with |
| * Runtime::CreateCalleeSaveMethod(kSaveAll) |
| */ |
| .macro SETUP_SAVE_ALL_CALLEE_SAVE_FRAME |
| push {r4-r11, lr} @ 9 words of callee saves |
| .save {r4-r11, lr} |
| .cfi_adjust_cfa_offset 36 |
| .cfi_rel_offset r4, 0 |
| .cfi_rel_offset r5, 4 |
| .cfi_rel_offset r6, 8 |
| .cfi_rel_offset r7, 12 |
| .cfi_rel_offset r8, 16 |
| .cfi_rel_offset r9, 20 |
| .cfi_rel_offset r10, 24 |
| .cfi_rel_offset r11, 28 |
| .cfi_rel_offset lr, 32 |
| vpush {s0-s31} |
| .pad #128 |
| .cfi_adjust_cfa_offset 128 |
| sub sp, #12 @ 3 words of space, bottom word will hold Method* |
| .pad #12 |
| .cfi_adjust_cfa_offset 12 |
| |
| // Ugly compile-time check, but we only have the preprocessor. |
| #if (FRAME_SIZE_SAVE_ALL_CALLEE_SAVE != 36 + 128 + 12) |
| #error "SAVE_ALL_CALLEE_SAVE_FRAME(ARM) size not as expected." |
| #endif |
| .endm |
| |
| /* |
| * Macro that sets up the callee save frame to conform with |
| * Runtime::CreateCalleeSaveMethod(kRefsOnly). |
| */ |
| .macro SETUP_REF_ONLY_CALLEE_SAVE_FRAME |
| push {r5-r8, r10-r11, lr} @ 7 words of callee saves |
| .save {r5-r8, r10-r11, lr} |
| .cfi_adjust_cfa_offset 28 |
| .cfi_rel_offset r5, 0 |
| .cfi_rel_offset r6, 4 |
| .cfi_rel_offset r7, 8 |
| .cfi_rel_offset r8, 12 |
| .cfi_rel_offset r10, 16 |
| .cfi_rel_offset r11, 20 |
| .cfi_rel_offset lr, 24 |
| sub sp, #4 @ bottom word will hold Method* |
| .pad #4 |
| .cfi_adjust_cfa_offset 4 |
| |
| // Ugly compile-time check, but we only have the preprocessor. |
| #if (FRAME_SIZE_REFS_ONLY_CALLEE_SAVE != 28 + 4) |
| #error "REFS_ONLY_CALLEE_SAVE_FRAME(ARM) size not as expected." |
| #endif |
| .endm |
| |
| .macro RESTORE_REF_ONLY_CALLEE_SAVE_FRAME |
| add sp, #4 @ bottom word holds Method* |
| pop {r5-r8, r10-r11, lr} @ 7 words of callee saves |
| .cfi_restore r5 |
| .cfi_restore r6 |
| .cfi_restore r7 |
| .cfi_restore r8 |
| .cfi_restore r10 |
| .cfi_restore r11 |
| .cfi_adjust_cfa_offset -32 |
| .endm |
| |
| .macro RESTORE_REF_ONLY_CALLEE_SAVE_FRAME_AND_RETURN |
| add sp, #4 @ bottom word holds Method* |
| pop {r5-r8, r10-r11, lr} @ 7 words of callee saves |
| .cfi_restore r5 |
| .cfi_restore r6 |
| .cfi_restore r7 |
| .cfi_restore r8 |
| .cfi_restore r10 |
| .cfi_restore r11 |
| .cfi_adjust_cfa_offset -32 |
| bx lr @ return |
| .endm |
| |
| /* |
| * Macro that sets up the callee save frame to conform with |
| * Runtime::CreateCalleeSaveMethod(kRefsAndArgs). |
| */ |
| .macro SETUP_REF_AND_ARGS_CALLEE_SAVE_FRAME |
| push {r1-r3, r5-r8, r10-r11, lr} @ 10 words of callee saves |
| .save {r1-r3, r5-r8, r10-r11, lr} |
| .cfi_rel_offset r1, 0 |
| .cfi_rel_offset r2, 4 |
| .cfi_rel_offset r3, 8 |
| .cfi_rel_offset r5, 12 |
| .cfi_rel_offset r6, 16 |
| .cfi_rel_offset r7, 20 |
| .cfi_rel_offset r8, 24 |
| .cfi_rel_offset r10, 28 |
| .cfi_rel_offset r11, 32 |
| .cfi_rel_offset lr, 36 |
| .cfi_adjust_cfa_offset 40 |
| sub sp, #8 @ 2 words of space, bottom word will hold Method* |
| .pad #8 |
| .cfi_adjust_cfa_offset 8 |
| |
| // Ugly compile-time check, but we only have the preprocessor. |
| #if (FRAME_SIZE_REFS_AND_ARGS_CALLEE_SAVE != 40 + 8) |
| #error "REFS_AND_ARGS_CALLEE_SAVE_FRAME(ARM) size not as expected." |
| #endif |
| .endm |
| |
| .macro RESTORE_REF_AND_ARGS_CALLEE_SAVE_FRAME |
| add sp, #8 @ rewind sp |
| pop {r1-r3, r5-r8, r10-r11, lr} @ 10 words of callee saves |
| .cfi_restore r1 |
| .cfi_restore r2 |
| .cfi_restore r3 |
| .cfi_restore r5 |
| .cfi_restore r6 |
| .cfi_restore r7 |
| .cfi_restore r8 |
| .cfi_restore r10 |
| .cfi_restore r11 |
| .cfi_adjust_cfa_offset -48 |
| .endm |
| |
| .macro RETURN_IF_RESULT_IS_ZERO |
| cbnz r0, 1f @ result non-zero branch over |
| bx lr @ return |
| 1: |
| .endm |
| |
| .macro RETURN_IF_RESULT_IS_NON_ZERO |
| cbz r0, 1f @ result zero branch over |
| bx lr @ return |
| 1: |
| .endm |
| |
| /* |
| * Macro that set calls through to artDeliverPendingExceptionFromCode, where the pending |
| * exception is Thread::Current()->exception_ |
| */ |
| .macro DELIVER_PENDING_EXCEPTION |
| .fnend |
| .fnstart |
| SETUP_SAVE_ALL_CALLEE_SAVE_FRAME @ save callee saves for throw |
| mov r0, r9 @ pass Thread::Current |
| mov r1, sp @ pass SP |
| b artDeliverPendingExceptionFromCode @ artDeliverPendingExceptionFromCode(Thread*, SP) |
| .endm |
| |
| .macro NO_ARG_RUNTIME_EXCEPTION c_name, cxx_name |
| .extern \cxx_name |
| ENTRY \c_name |
| SETUP_SAVE_ALL_CALLEE_SAVE_FRAME // save all registers as basis for long jump context |
| mov r0, r9 @ pass Thread::Current |
| mov r1, sp @ pass SP |
| b \cxx_name @ \cxx_name(Thread*, SP) |
| END \c_name |
| .endm |
| |
| .macro ONE_ARG_RUNTIME_EXCEPTION c_name, cxx_name |
| .extern \cxx_name |
| ENTRY \c_name |
| SETUP_SAVE_ALL_CALLEE_SAVE_FRAME // save all registers as basis for long jump context |
| mov r1, r9 @ pass Thread::Current |
| mov r2, sp @ pass SP |
| b \cxx_name @ \cxx_name(Thread*, SP) |
| bkpt |
| END \c_name |
| .endm |
| |
| .macro TWO_ARG_RUNTIME_EXCEPTION c_name, cxx_name |
| .extern \cxx_name |
| ENTRY \c_name |
| SETUP_SAVE_ALL_CALLEE_SAVE_FRAME // save all registers as basis for long jump context |
| mov r2, r9 @ pass Thread::Current |
| mov r3, sp @ pass SP |
| b \cxx_name @ \cxx_name(Thread*, SP) |
| bkpt |
| END \c_name |
| .endm |
| |
| /* |
| * Called by managed code, saves callee saves and then calls artThrowException |
| * that will place a mock Method* at the bottom of the stack. Arg1 holds the exception. |
| */ |
| ONE_ARG_RUNTIME_EXCEPTION art_quick_deliver_exception, artDeliverExceptionFromCode |
| |
| /* |
| * Called by managed code to create and deliver a NullPointerException. |
| */ |
| NO_ARG_RUNTIME_EXCEPTION art_quick_throw_null_pointer_exception, artThrowNullPointerExceptionFromCode |
| |
| /* |
| * Called by managed code to create and deliver an ArithmeticException. |
| */ |
| NO_ARG_RUNTIME_EXCEPTION art_quick_throw_div_zero, artThrowDivZeroFromCode |
| |
| /* |
| * Called by managed code to create and deliver an ArrayIndexOutOfBoundsException. Arg1 holds |
| * index, arg2 holds limit. |
| */ |
| TWO_ARG_RUNTIME_EXCEPTION art_quick_throw_array_bounds, artThrowArrayBoundsFromCode |
| |
| /* |
| * Called by managed code to create and deliver a StackOverflowError. |
| */ |
| NO_ARG_RUNTIME_EXCEPTION art_quick_throw_stack_overflow, artThrowStackOverflowFromCode |
| |
| /* |
| * Called by managed code to create and deliver a NoSuchMethodError. |
| */ |
| ONE_ARG_RUNTIME_EXCEPTION art_quick_throw_no_such_method, artThrowNoSuchMethodFromCode |
| |
| /* |
| * Invoke stack overflow exception from signal handler. |
| * On entry: |
| * r9: thread |
| * sp: address of last known frame |
| * r12: address of next valid SP below protected region in stack |
| * |
| * This is deceptively simple but hides some complexity. It is called in the case of |
| * a stack overflow condition during implicit checks. The signal handler has been |
| * called by the kernel due to a load from the protected stack region. The handler |
| * works out the address of the previous frame and passes this in SP. However there |
| * is a piece of memory somewhere below the current SP that is not accessible (the |
| * memory that caused the signal). The signal handler works out the next |
| * accessible value of SP and passes this in r12. This code then sets up the SP |
| * to be this new value and calls the code to create and throw the stack overflow |
| * exception. |
| */ |
| ENTRY art_quick_throw_stack_overflow_from_signal |
| SETUP_SAVE_ALL_CALLEE_SAVE_FRAME // save all registers as basis for long jump context |
| mov r0, r9 @ pass Thread::Current |
| mov r1, sp @ pass SP |
| mov sp, r12 @ move SP down to below protected region. |
| b artThrowStackOverflowFromCode @ artThrowStackOverflowFromCode(Thread*, SP) |
| END art_quick_throw_stack_overflow_from_signal |
| |
| /* |
| * All generated callsites for interface invokes and invocation slow paths will load arguments |
| * as usual - except instead of loading arg0/r0 with the target Method*, arg0/r0 will contain |
| * the method_idx. This wrapper will save arg1-arg3, load the caller's Method*, align the |
| * stack and call the appropriate C helper. |
| * NOTE: "this" is first visible argument of the target, and so can be found in arg1/r1. |
| * |
| * The helper will attempt to locate the target and return a 64-bit result in r0/r1 consisting |
| * of the target Method* in r0 and method->code_ in r1. |
| * |
| * If unsuccessful, the helper will return NULL/NULL. There will bea pending exception in the |
| * thread and we branch to another stub to deliver it. |
| * |
| * On success this wrapper will restore arguments and *jump* to the target, leaving the lr |
| * pointing back to the original caller. |
| */ |
| .macro INVOKE_TRAMPOLINE c_name, cxx_name |
| .extern \cxx_name |
| ENTRY \c_name |
| SETUP_REF_AND_ARGS_CALLEE_SAVE_FRAME @ save callee saves in case allocation triggers GC |
| ldr r2, [sp, #48] @ pass caller Method* |
| mov r3, r9 @ pass Thread::Current |
| mov r12, sp |
| str r12, [sp, #-16]! @ expand the frame and pass SP |
| .pad #16 |
| .cfi_adjust_cfa_offset 16 |
| bl \cxx_name @ (method_idx, this, caller, Thread*, SP) |
| add sp, #16 @ strip the extra frame |
| .cfi_adjust_cfa_offset -16 |
| mov r12, r1 @ save Method*->code_ |
| RESTORE_REF_AND_ARGS_CALLEE_SAVE_FRAME |
| cbz r0, 1f @ did we find the target? if not go to exception delivery |
| bx r12 @ tail call to target |
| 1: |
| DELIVER_PENDING_EXCEPTION |
| END \c_name |
| .endm |
| |
| INVOKE_TRAMPOLINE art_quick_invoke_interface_trampoline, artInvokeInterfaceTrampoline |
| INVOKE_TRAMPOLINE art_quick_invoke_interface_trampoline_with_access_check, artInvokeInterfaceTrampolineWithAccessCheck |
| |
| INVOKE_TRAMPOLINE art_quick_invoke_static_trampoline_with_access_check, artInvokeStaticTrampolineWithAccessCheck |
| INVOKE_TRAMPOLINE art_quick_invoke_direct_trampoline_with_access_check, artInvokeDirectTrampolineWithAccessCheck |
| INVOKE_TRAMPOLINE art_quick_invoke_super_trampoline_with_access_check, artInvokeSuperTrampolineWithAccessCheck |
| INVOKE_TRAMPOLINE art_quick_invoke_virtual_trampoline_with_access_check, artInvokeVirtualTrampolineWithAccessCheck |
| |
| /* |
| * Quick invocation stub. |
| * On entry: |
| * r0 = method pointer |
| * r1 = argument array or NULL for no argument methods |
| * r2 = size of argument array in bytes |
| * r3 = (managed) thread pointer |
| * [sp] = JValue* result |
| * [sp + 4] = shorty |
| */ |
| ENTRY art_quick_invoke_stub |
| push {r0, r4, r5, r9, r11, lr} @ spill regs |
| .save {r0, r4, r5, r9, r11, lr} |
| .pad #24 |
| .cfi_adjust_cfa_offset 24 |
| .cfi_rel_offset r0, 0 |
| .cfi_rel_offset r4, 4 |
| .cfi_rel_offset r5, 8 |
| .cfi_rel_offset r9, 12 |
| .cfi_rel_offset r11, 16 |
| .cfi_rel_offset lr, 20 |
| mov r11, sp @ save the stack pointer |
| .cfi_def_cfa_register r11 |
| mov r9, r3 @ move managed thread pointer into r9 |
| #ifdef ARM_R4_SUSPEND_FLAG |
| mov r4, #SUSPEND_CHECK_INTERVAL @ reset r4 to suspend check interval |
| #endif |
| add r5, r2, #16 @ create space for method pointer in frame |
| and r5, #0xFFFFFFF0 @ align frame size to 16 bytes |
| sub sp, r5 @ reserve stack space for argument array |
| add r0, sp, #4 @ pass stack pointer + method ptr as dest for memcpy |
| bl memcpy @ memcpy (dest, src, bytes) |
| ldr r0, [r11] @ restore method* |
| ldr r1, [sp, #4] @ copy arg value for r1 |
| ldr r2, [sp, #8] @ copy arg value for r2 |
| ldr r3, [sp, #12] @ copy arg value for r3 |
| mov ip, #0 @ set ip to 0 |
| str ip, [sp] @ store NULL for method* at bottom of frame |
| ldr ip, [r0, #METHOD_QUICK_CODE_OFFSET] @ get pointer to the code |
| blx ip @ call the method |
| mov sp, r11 @ restore the stack pointer |
| ldr ip, [sp, #24] @ load the result pointer |
| strd r0, [ip] @ store r0/r1 into result pointer |
| pop {r0, r4, r5, r9, r11, lr} @ restore spill regs |
| .cfi_restore r0 |
| .cfi_restore r4 |
| .cfi_restore r5 |
| .cfi_restore r9 |
| .cfi_restore lr |
| .cfi_adjust_cfa_offset -24 |
| bx lr |
| END art_quick_invoke_stub |
| |
| /* |
| * On entry r0 is uint32_t* gprs_ and r1 is uint32_t* fprs_ |
| */ |
| ARM_ENTRY art_quick_do_long_jump |
| vldm r1, {s0-s31} @ load all fprs from argument fprs_ |
| ldr r2, [r0, #60] @ r2 = r15 (PC from gprs_ 60=4*15) |
| ldr r14, [r0, #56] @ (LR from gprs_ 56=4*14) |
| add r0, r0, #12 @ increment r0 to skip gprs_[0..2] 12=4*3 |
| ldm r0, {r3-r13} @ load remaining gprs from argument gprs_ |
| mov r0, #0 @ clear result registers r0 and r1 |
| mov r1, #0 |
| bx r2 @ do long jump |
| END art_quick_do_long_jump |
| |
| /* |
| * Entry from managed code that calls artHandleFillArrayDataFromCode and delivers exception on |
| * failure. |
| */ |
| .extern artHandleFillArrayDataFromCode |
| ENTRY art_quick_handle_fill_data |
| SETUP_REF_ONLY_CALLEE_SAVE_FRAME @ save callee saves in case exception allocation triggers GC |
| mov r2, r9 @ pass Thread::Current |
| mov r3, sp @ pass SP |
| bl artHandleFillArrayDataFromCode @ (Array*, const DexFile::Payload*, Thread*, SP) |
| RESTORE_REF_ONLY_CALLEE_SAVE_FRAME |
| RETURN_IF_RESULT_IS_ZERO |
| DELIVER_PENDING_EXCEPTION |
| END art_quick_handle_fill_data |
| |
| /* |
| * Entry from managed code that calls artLockObjectFromCode, may block for GC. r0 holds the |
| * possibly null object to lock. |
| */ |
| .extern artLockObjectFromCode |
| ENTRY art_quick_lock_object |
| cbz r0, .Lslow_lock |
| .Lretry_lock: |
| ldr r2, [r9, #THREAD_ID_OFFSET] |
| ldrex r1, [r0, #LOCK_WORD_OFFSET] |
| cbnz r1, .Lnot_unlocked @ already thin locked |
| @ unlocked case - r2 holds thread id with count of 0 |
| strex r3, r2, [r0, #LOCK_WORD_OFFSET] |
| cbnz r3, .Lstrex_fail @ store failed, retry |
| dmb ish @ full (LoadLoad|LoadStore) memory barrier |
| bx lr |
| .Lstrex_fail: |
| b .Lretry_lock @ unlikely forward branch, need to reload and recheck r1/r2 |
| .Lnot_unlocked: |
| lsr r3, r1, 30 |
| cbnz r3, .Lslow_lock @ if either of the top two bits are set, go slow path |
| eor r2, r1, r2 @ lock_word.ThreadId() ^ self->ThreadId() |
| uxth r2, r2 @ zero top 16 bits |
| cbnz r2, .Lslow_lock @ lock word and self thread id's match -> recursive lock |
| @ else contention, go to slow path |
| add r2, r1, #65536 @ increment count in lock word placing in r2 for storing |
| lsr r1, r2, 30 @ if either of the top two bits are set, we overflowed. |
| cbnz r1, .Lslow_lock @ if we overflow the count go slow path |
| str r2, [r0, #LOCK_WORD_OFFSET] @ no need for strex as we hold the lock |
| bx lr |
| .Lslow_lock: |
| SETUP_REF_ONLY_CALLEE_SAVE_FRAME @ save callee saves in case we block |
| mov r1, r9 @ pass Thread::Current |
| mov r2, sp @ pass SP |
| bl artLockObjectFromCode @ (Object* obj, Thread*, SP) |
| RESTORE_REF_ONLY_CALLEE_SAVE_FRAME |
| RETURN_IF_RESULT_IS_ZERO |
| DELIVER_PENDING_EXCEPTION |
| END art_quick_lock_object |
| |
| /* |
| * Entry from managed code that calls artUnlockObjectFromCode and delivers exception on failure. |
| * r0 holds the possibly null object to lock. |
| */ |
| .extern artUnlockObjectFromCode |
| ENTRY art_quick_unlock_object |
| cbz r0, .Lslow_unlock |
| ldr r1, [r0, #LOCK_WORD_OFFSET] |
| lsr r2, r1, 30 |
| cbnz r2, .Lslow_unlock @ if either of the top two bits are set, go slow path |
| ldr r2, [r9, #THREAD_ID_OFFSET] |
| eor r3, r1, r2 @ lock_word.ThreadId() ^ self->ThreadId() |
| uxth r3, r3 @ zero top 16 bits |
| cbnz r3, .Lslow_unlock @ do lock word and self thread id's match? |
| cmp r1, #65536 |
| bpl .Lrecursive_thin_unlock |
| @ transition to unlocked, r3 holds 0 |
| dmb ish @ full (LoadStore|StoreStore) memory barrier |
| str r3, [r0, #LOCK_WORD_OFFSET] |
| bx lr |
| .Lrecursive_thin_unlock: |
| sub r1, r1, #65536 |
| str r1, [r0, #LOCK_WORD_OFFSET] |
| bx lr |
| .Lslow_unlock: |
| SETUP_REF_ONLY_CALLEE_SAVE_FRAME @ save callee saves in case exception allocation triggers GC |
| mov r1, r9 @ pass Thread::Current |
| mov r2, sp @ pass SP |
| bl artUnlockObjectFromCode @ (Object* obj, Thread*, SP) |
| RESTORE_REF_ONLY_CALLEE_SAVE_FRAME |
| RETURN_IF_RESULT_IS_ZERO |
| DELIVER_PENDING_EXCEPTION |
| END art_quick_unlock_object |
| |
| /* |
| * Entry from managed code that calls artIsAssignableFromCode and on failure calls |
| * artThrowClassCastException. |
| */ |
| .extern artThrowClassCastException |
| ENTRY art_quick_check_cast |
| push {r0-r1, lr} @ save arguments, link register and pad |
| .save {r0-r1, lr} |
| .cfi_adjust_cfa_offset 12 |
| .cfi_rel_offset r0, 0 |
| .cfi_rel_offset r1, 4 |
| .cfi_rel_offset lr, 8 |
| sub sp, #4 |
| .pad #4 |
| .cfi_adjust_cfa_offset 4 |
| bl artIsAssignableFromCode |
| cbz r0, .Lthrow_class_cast_exception |
| add sp, #4 |
| .cfi_adjust_cfa_offset -4 |
| pop {r0-r1, pc} |
| .Lthrow_class_cast_exception: |
| add sp, #4 |
| .cfi_adjust_cfa_offset -4 |
| pop {r0-r1, lr} |
| .cfi_restore r0 |
| .cfi_restore r1 |
| SETUP_SAVE_ALL_CALLEE_SAVE_FRAME // save all registers as basis for long jump context |
| mov r2, r9 @ pass Thread::Current |
| mov r3, sp @ pass SP |
| b artThrowClassCastException @ (Class*, Class*, Thread*, SP) |
| bkpt |
| END art_quick_check_cast |
| |
| /* |
| * Entry from managed code for array put operations of objects where the value being stored |
| * needs to be checked for compatibility. |
| * r0 = array, r1 = index, r2 = value |
| */ |
| ENTRY art_quick_aput_obj_with_null_and_bound_check |
| tst r0, r0 |
| bne art_quick_aput_obj_with_bound_check_local |
| b art_quick_throw_null_pointer_exception |
| END art_quick_aput_obj_with_null_and_bound_check |
| |
| ENTRY art_quick_aput_obj_with_bound_check |
| art_quick_aput_obj_with_bound_check_local: |
| ldr r3, [r0, #ARRAY_LENGTH_OFFSET] |
| cmp r3, r1 |
| bhi art_quick_aput_obj_local |
| mov r0, r1 |
| mov r1, r3 |
| b art_quick_throw_array_bounds |
| END art_quick_aput_obj_with_bound_check |
| |
| ENTRY art_quick_aput_obj |
| art_quick_aput_obj_local: |
| cbz r2, .Ldo_aput_null |
| ldr r3, [r0, #CLASS_OFFSET] |
| ldr ip, [r2, #CLASS_OFFSET] |
| ldr r3, [r3, #CLASS_COMPONENT_TYPE_OFFSET] |
| cmp r3, ip @ value's type == array's component type - trivial assignability |
| bne .Lcheck_assignability |
| .Ldo_aput: |
| add r3, r0, #OBJECT_ARRAY_DATA_OFFSET |
| str r2, [r3, r1, lsl #2] |
| ldr r3, [r9, #THREAD_CARD_TABLE_OFFSET] |
| lsr r0, r0, #7 |
| strb r3, [r3, r0] |
| blx lr |
| .Ldo_aput_null: |
| add r3, r0, #OBJECT_ARRAY_DATA_OFFSET |
| str r2, [r3, r1, lsl #2] |
| blx lr |
| .Lcheck_assignability: |
| push {r0-r2, lr} @ save arguments |
| .save {r0-r2, lr} |
| .cfi_adjust_cfa_offset 16 |
| .cfi_rel_offset r0, 0 |
| .cfi_rel_offset r1, 4 |
| .cfi_rel_offset r2, 8 |
| .cfi_rel_offset lr, 12 |
| mov r1, ip |
| mov r0, r3 |
| bl artIsAssignableFromCode |
| cbz r0, .Lthrow_array_store_exception |
| pop {r0-r2, lr} |
| .cfi_restore r0 |
| .cfi_restore r1 |
| .cfi_restore r2 |
| .cfi_restore lr |
| .cfi_adjust_cfa_offset -16 |
| add r3, r0, #OBJECT_ARRAY_DATA_OFFSET |
| str r2, [r3, r1, lsl #2] |
| ldr r3, [r9, #THREAD_CARD_TABLE_OFFSET] |
| lsr r0, r0, #7 |
| strb r3, [r3, r0] |
| blx lr |
| .Lthrow_array_store_exception: |
| pop {r0-r2, lr} |
| .cfi_restore r0 |
| .cfi_restore r1 |
| .cfi_restore r2 |
| .cfi_restore lr |
| .cfi_adjust_cfa_offset -16 |
| SETUP_SAVE_ALL_CALLEE_SAVE_FRAME |
| mov r1, r2 |
| mov r2, r9 @ pass Thread::Current |
| mov r3, sp @ pass SP |
| b artThrowArrayStoreException @ (Class*, Class*, Thread*, SP) |
| bkpt @ unreached |
| END art_quick_aput_obj |
| |
| /* |
| * Entry from managed code when uninitialized static storage, this stub will run the class |
| * initializer and deliver the exception on error. On success the static storage base is |
| * returned. |
| */ |
| .extern artInitializeStaticStorageFromCode |
| ENTRY art_quick_initialize_static_storage |
| SETUP_REF_ONLY_CALLEE_SAVE_FRAME @ save callee saves in case of GC |
| mov r2, r9 @ pass Thread::Current |
| mov r3, sp @ pass SP |
| @ artInitializeStaticStorageFromCode(uint32_t type_idx, Method* referrer, Thread*, SP) |
| bl artInitializeStaticStorageFromCode |
| RESTORE_REF_ONLY_CALLEE_SAVE_FRAME |
| RETURN_IF_RESULT_IS_NON_ZERO |
| DELIVER_PENDING_EXCEPTION |
| END art_quick_initialize_static_storage |
| |
| /* |
| * Entry from managed code when dex cache misses for a type_idx |
| */ |
| .extern artInitializeTypeFromCode |
| ENTRY art_quick_initialize_type |
| SETUP_REF_ONLY_CALLEE_SAVE_FRAME @ save callee saves in case of GC |
| mov r2, r9 @ pass Thread::Current |
| mov r3, sp @ pass SP |
| @ artInitializeTypeFromCode(uint32_t type_idx, Method* referrer, Thread*, SP) |
| bl artInitializeTypeFromCode |
| RESTORE_REF_ONLY_CALLEE_SAVE_FRAME |
| RETURN_IF_RESULT_IS_NON_ZERO |
| DELIVER_PENDING_EXCEPTION |
| END art_quick_initialize_type |
| |
| /* |
| * Entry from managed code when type_idx needs to be checked for access and dex cache may also |
| * miss. |
| */ |
| .extern artInitializeTypeAndVerifyAccessFromCode |
| ENTRY art_quick_initialize_type_and_verify_access |
| SETUP_REF_ONLY_CALLEE_SAVE_FRAME @ save callee saves in case of GC |
| mov r2, r9 @ pass Thread::Current |
| mov r3, sp @ pass SP |
| @ artInitializeTypeAndVerifyAccessFromCode(uint32_t type_idx, Method* referrer, Thread*, SP) |
| bl artInitializeTypeAndVerifyAccessFromCode |
| RESTORE_REF_ONLY_CALLEE_SAVE_FRAME |
| RETURN_IF_RESULT_IS_NON_ZERO |
| DELIVER_PENDING_EXCEPTION |
| END art_quick_initialize_type_and_verify_access |
| |
| /* |
| * Called by managed code to resolve a static field and load a 32-bit primitive value. |
| */ |
| .extern artGet32StaticFromCode |
| ENTRY art_quick_get32_static |
| SETUP_REF_ONLY_CALLEE_SAVE_FRAME @ save callee saves in case of GC |
| ldr r1, [sp, #32] @ pass referrer |
| mov r2, r9 @ pass Thread::Current |
| mov r3, sp @ pass SP |
| bl artGet32StaticFromCode @ (uint32_t field_idx, const Method* referrer, Thread*, SP) |
| ldr r1, [r9, #THREAD_EXCEPTION_OFFSET] @ load Thread::Current()->exception_ |
| RESTORE_REF_ONLY_CALLEE_SAVE_FRAME |
| cbnz r1, 1f @ success if no exception pending |
| bx lr @ return on success |
| 1: |
| DELIVER_PENDING_EXCEPTION |
| END art_quick_get32_static |
| |
| /* |
| * Called by managed code to resolve a static field and load a 64-bit primitive value. |
| */ |
| .extern artGet64StaticFromCode |
| ENTRY art_quick_get64_static |
| SETUP_REF_ONLY_CALLEE_SAVE_FRAME @ save callee saves in case of GC |
| ldr r1, [sp, #32] @ pass referrer |
| mov r2, r9 @ pass Thread::Current |
| mov r3, sp @ pass SP |
| bl artGet64StaticFromCode @ (uint32_t field_idx, const Method* referrer, Thread*, SP) |
| ldr r2, [r9, #THREAD_EXCEPTION_OFFSET] @ load Thread::Current()->exception_ |
| RESTORE_REF_ONLY_CALLEE_SAVE_FRAME |
| cbnz r2, 1f @ success if no exception pending |
| bx lr @ return on success |
| 1: |
| DELIVER_PENDING_EXCEPTION |
| END art_quick_get64_static |
| |
| /* |
| * Called by managed code to resolve a static field and load an object reference. |
| */ |
| .extern artGetObjStaticFromCode |
| ENTRY art_quick_get_obj_static |
| SETUP_REF_ONLY_CALLEE_SAVE_FRAME @ save callee saves in case of GC |
| ldr r1, [sp, #32] @ pass referrer |
| mov r2, r9 @ pass Thread::Current |
| mov r3, sp @ pass SP |
| bl artGetObjStaticFromCode @ (uint32_t field_idx, const Method* referrer, Thread*, SP) |
| ldr r1, [r9, #THREAD_EXCEPTION_OFFSET] @ load Thread::Current()->exception_ |
| RESTORE_REF_ONLY_CALLEE_SAVE_FRAME |
| cbnz r1, 1f @ success if no exception pending |
| bx lr @ return on success |
| 1: |
| DELIVER_PENDING_EXCEPTION |
| END art_quick_get_obj_static |
| |
| /* |
| * Called by managed code to resolve an instance field and load a 32-bit primitive value. |
| */ |
| .extern artGet32InstanceFromCode |
| ENTRY art_quick_get32_instance |
| SETUP_REF_ONLY_CALLEE_SAVE_FRAME @ save callee saves in case of GC |
| ldr r2, [sp, #32] @ pass referrer |
| mov r3, r9 @ pass Thread::Current |
| mov r12, sp |
| str r12, [sp, #-16]! @ expand the frame and pass SP |
| bl artGet32InstanceFromCode @ (field_idx, Object*, referrer, Thread*, SP) |
| add sp, #16 @ strip the extra frame |
| ldr r1, [r9, #THREAD_EXCEPTION_OFFSET] @ load Thread::Current()->exception_ |
| RESTORE_REF_ONLY_CALLEE_SAVE_FRAME |
| cbnz r1, 1f @ success if no exception pending |
| bx lr @ return on success |
| 1: |
| DELIVER_PENDING_EXCEPTION |
| END art_quick_get32_instance |
| |
| /* |
| * Called by managed code to resolve an instance field and load a 64-bit primitive value. |
| */ |
| .extern artGet64InstanceFromCode |
| ENTRY art_quick_get64_instance |
| SETUP_REF_ONLY_CALLEE_SAVE_FRAME @ save callee saves in case of GC |
| ldr r2, [sp, #32] @ pass referrer |
| mov r3, r9 @ pass Thread::Current |
| mov r12, sp |
| str r12, [sp, #-16]! @ expand the frame and pass SP |
| .pad #16 |
| .cfi_adjust_cfa_offset 16 |
| bl artGet64InstanceFromCode @ (field_idx, Object*, referrer, Thread*, SP) |
| add sp, #16 @ strip the extra frame |
| .cfi_adjust_cfa_offset -16 |
| ldr r2, [r9, #THREAD_EXCEPTION_OFFSET] @ load Thread::Current()->exception_ |
| RESTORE_REF_ONLY_CALLEE_SAVE_FRAME |
| cbnz r2, 1f @ success if no exception pending |
| bx lr @ return on success |
| 1: |
| DELIVER_PENDING_EXCEPTION |
| END art_quick_get64_instance |
| |
| /* |
| * Called by managed code to resolve an instance field and load an object reference. |
| */ |
| .extern artGetObjInstanceFromCode |
| ENTRY art_quick_get_obj_instance |
| SETUP_REF_ONLY_CALLEE_SAVE_FRAME @ save callee saves in case of GC |
| ldr r2, [sp, #32] @ pass referrer |
| mov r3, r9 @ pass Thread::Current |
| mov r12, sp |
| str r12, [sp, #-16]! @ expand the frame and pass SP |
| .pad #16 |
| .cfi_adjust_cfa_offset 16 |
| bl artGetObjInstanceFromCode @ (field_idx, Object*, referrer, Thread*, SP) |
| add sp, #16 @ strip the extra frame |
| .cfi_adjust_cfa_offset -16 |
| ldr r1, [r9, #THREAD_EXCEPTION_OFFSET] @ load Thread::Current()->exception_ |
| RESTORE_REF_ONLY_CALLEE_SAVE_FRAME |
| cbnz r1, 1f @ success if no exception pending |
| bx lr @ return on success |
| 1: |
| DELIVER_PENDING_EXCEPTION |
| END art_quick_get_obj_instance |
| |
| /* |
| * Called by managed code to resolve a static field and store a 32-bit primitive value. |
| */ |
| .extern artSet32StaticFromCode |
| ENTRY art_quick_set32_static |
| SETUP_REF_ONLY_CALLEE_SAVE_FRAME @ save callee saves in case of GC |
| ldr r2, [sp, #32] @ pass referrer |
| mov r3, r9 @ pass Thread::Current |
| mov r12, sp |
| str r12, [sp, #-16]! @ expand the frame and pass SP |
| .pad #16 |
| .cfi_adjust_cfa_offset 16 |
| bl artSet32StaticFromCode @ (field_idx, new_val, referrer, Thread*, SP) |
| add sp, #16 @ strip the extra frame |
| .cfi_adjust_cfa_offset -16 |
| RESTORE_REF_ONLY_CALLEE_SAVE_FRAME |
| RETURN_IF_RESULT_IS_ZERO |
| DELIVER_PENDING_EXCEPTION |
| END art_quick_set32_static |
| |
| /* |
| * Called by managed code to resolve a static field and store a 64-bit primitive value. |
| * On entry r0 holds field index, r1:r2 hold new_val |
| */ |
| .extern artSet64StaticFromCode |
| ENTRY art_quick_set64_static |
| SETUP_REF_ONLY_CALLEE_SAVE_FRAME @ save callee saves in case of GC |
| mov r3, r2 @ pass one half of wide argument |
| mov r2, r1 @ pass other half of wide argument |
| ldr r1, [sp, #32] @ pass referrer |
| mov r12, sp @ save SP |
| sub sp, #8 @ grow frame for alignment with stack args |
| .pad #8 |
| .cfi_adjust_cfa_offset 8 |
| push {r9, r12} @ pass Thread::Current and SP |
| .save {r9, r12} |
| .cfi_adjust_cfa_offset 8 |
| .cfi_rel_offset r9, 0 |
| bl artSet64StaticFromCode @ (field_idx, referrer, new_val, Thread*, SP) |
| add sp, #16 @ release out args |
| .cfi_adjust_cfa_offset -16 |
| RESTORE_REF_ONLY_CALLEE_SAVE_FRAME @ TODO: we can clearly save an add here |
| RETURN_IF_RESULT_IS_ZERO |
| DELIVER_PENDING_EXCEPTION |
| END art_quick_set64_static |
| |
| /* |
| * Called by managed code to resolve a static field and store an object reference. |
| */ |
| .extern artSetObjStaticFromCode |
| ENTRY art_quick_set_obj_static |
| SETUP_REF_ONLY_CALLEE_SAVE_FRAME @ save callee saves in case of GC |
| ldr r2, [sp, #32] @ pass referrer |
| mov r3, r9 @ pass Thread::Current |
| mov r12, sp |
| str r12, [sp, #-16]! @ expand the frame and pass SP |
| .pad #16 |
| .cfi_adjust_cfa_offset 16 |
| bl artSetObjStaticFromCode @ (field_idx, new_val, referrer, Thread*, SP) |
| add sp, #16 @ strip the extra frame |
| .cfi_adjust_cfa_offset -16 |
| RESTORE_REF_ONLY_CALLEE_SAVE_FRAME |
| RETURN_IF_RESULT_IS_ZERO |
| DELIVER_PENDING_EXCEPTION |
| END art_quick_set_obj_static |
| |
| /* |
| * Called by managed code to resolve an instance field and store a 32-bit primitive value. |
| */ |
| .extern artSet32InstanceFromCode |
| ENTRY art_quick_set32_instance |
| SETUP_REF_ONLY_CALLEE_SAVE_FRAME @ save callee saves in case of GC |
| ldr r3, [sp, #32] @ pass referrer |
| mov r12, sp @ save SP |
| sub sp, #8 @ grow frame for alignment with stack args |
| .pad #8 |
| .cfi_adjust_cfa_offset 8 |
| push {r9, r12} @ pass Thread::Current and SP |
| .save {r9, r12} |
| .cfi_adjust_cfa_offset 8 |
| .cfi_rel_offset r9, 0 |
| .cfi_rel_offset r12, 4 |
| bl artSet32InstanceFromCode @ (field_idx, Object*, new_val, referrer, Thread*, SP) |
| add sp, #16 @ release out args |
| .cfi_adjust_cfa_offset -16 |
| RESTORE_REF_ONLY_CALLEE_SAVE_FRAME @ TODO: we can clearly save an add here |
| RETURN_IF_RESULT_IS_ZERO |
| DELIVER_PENDING_EXCEPTION |
| END art_quick_set32_instance |
| |
| /* |
| * Called by managed code to resolve an instance field and store a 64-bit primitive value. |
| */ |
| .extern artSet32InstanceFromCode |
| ENTRY art_quick_set64_instance |
| SETUP_REF_ONLY_CALLEE_SAVE_FRAME @ save callee saves in case of GC |
| mov r12, sp @ save SP |
| sub sp, #8 @ grow frame for alignment with stack args |
| .pad #8 |
| .cfi_adjust_cfa_offset 8 |
| push {r9, r12} @ pass Thread::Current and SP |
| .save {r9, r12} |
| .cfi_adjust_cfa_offset 8 |
| .cfi_rel_offset r9, 0 |
| bl artSet64InstanceFromCode @ (field_idx, Object*, new_val, Thread*, SP) |
| add sp, #16 @ release out args |
| .cfi_adjust_cfa_offset -16 |
| RESTORE_REF_ONLY_CALLEE_SAVE_FRAME @ TODO: we can clearly save an add here |
| RETURN_IF_RESULT_IS_ZERO |
| DELIVER_PENDING_EXCEPTION |
| END art_quick_set64_instance |
| |
| /* |
| * Called by managed code to resolve an instance field and store an object reference. |
| */ |
| .extern artSetObjInstanceFromCode |
| ENTRY art_quick_set_obj_instance |
| SETUP_REF_ONLY_CALLEE_SAVE_FRAME @ save callee saves in case of GC |
| ldr r3, [sp, #32] @ pass referrer |
| mov r12, sp @ save SP |
| sub sp, #8 @ grow frame for alignment with stack args |
| .pad #8 |
| .cfi_adjust_cfa_offset 8 |
| push {r9, r12} @ pass Thread::Current and SP |
| .save {r9, r12} |
| .cfi_adjust_cfa_offset 8 |
| .cfi_rel_offset r9, 0 |
| bl artSetObjInstanceFromCode @ (field_idx, Object*, new_val, referrer, Thread*, SP) |
| add sp, #16 @ release out args |
| .cfi_adjust_cfa_offset -16 |
| RESTORE_REF_ONLY_CALLEE_SAVE_FRAME @ TODO: we can clearly save an add here |
| RETURN_IF_RESULT_IS_ZERO |
| DELIVER_PENDING_EXCEPTION |
| END art_quick_set_obj_instance |
| |
| /* |
| * Entry from managed code to resolve a string, this stub will allocate a String and deliver an |
| * exception on error. On success the String is returned. R0 holds the referring method, |
| * R1 holds the string index. The fast path check for hit in strings cache has already been |
| * performed. |
| */ |
| .extern artResolveStringFromCode |
| ENTRY art_quick_resolve_string |
| SETUP_REF_ONLY_CALLEE_SAVE_FRAME @ save callee saves in case of GC |
| mov r2, r9 @ pass Thread::Current |
| mov r3, sp @ pass SP |
| @ artResolveStringFromCode(Method* referrer, uint32_t string_idx, Thread*, SP) |
| bl artResolveStringFromCode |
| RESTORE_REF_ONLY_CALLEE_SAVE_FRAME |
| RETURN_IF_RESULT_IS_NON_ZERO |
| DELIVER_PENDING_EXCEPTION |
| END art_quick_resolve_string |
| |
| // Macro to facilitate adding new allocation entrypoints. |
| .macro TWO_ARG_DOWNCALL name, entrypoint, return |
| .extern \entrypoint |
| ENTRY \name |
| SETUP_REF_ONLY_CALLEE_SAVE_FRAME @ save callee saves in case of GC |
| mov r2, r9 @ pass Thread::Current |
| mov r3, sp @ pass SP |
| bl \entrypoint @ (uint32_t type_idx, Method* method, Thread*, SP) |
| RESTORE_REF_ONLY_CALLEE_SAVE_FRAME |
| \return |
| DELIVER_PENDING_EXCEPTION |
| END \name |
| .endm |
| |
| // Macro to facilitate adding new array allocation entrypoints. |
| .macro THREE_ARG_DOWNCALL name, entrypoint, return |
| .extern \entrypoint |
| ENTRY \name |
| SETUP_REF_ONLY_CALLEE_SAVE_FRAME @ save callee saves in case of GC |
| mov r3, r9 @ pass Thread::Current |
| mov r12, sp |
| str r12, [sp, #-16]! @ expand the frame and pass SP |
| .pad #16 |
| .cfi_adjust_cfa_offset 16 |
| @ (uint32_t type_idx, Method* method, int32_t component_count, Thread*, SP) |
| bl \entrypoint |
| add sp, #16 @ strip the extra frame |
| .cfi_adjust_cfa_offset -16 |
| RESTORE_REF_ONLY_CALLEE_SAVE_FRAME |
| \return |
| DELIVER_PENDING_EXCEPTION |
| END \name |
| .endm |
| |
| // Generate the allocation entrypoints for each allocator. |
| GENERATE_ALL_ALLOC_ENTRYPOINTS |
| |
| /* |
| * Called by managed code when the value in rSUSPEND has been decremented to 0. |
| */ |
| .extern artTestSuspendFromCode |
| ENTRY art_quick_test_suspend |
| #ifdef ARM_R4_SUSPEND_FLAG |
| ldrh r0, [rSELF, #THREAD_FLAGS_OFFSET] |
| mov rSUSPEND, #SUSPEND_CHECK_INTERVAL @ reset rSUSPEND to SUSPEND_CHECK_INTERVAL |
| cbnz r0, 1f @ check Thread::Current()->suspend_count_ == 0 |
| bx lr @ return if suspend_count_ == 0 |
| 1: |
| #endif |
| mov r0, rSELF |
| SETUP_REF_ONLY_CALLEE_SAVE_FRAME @ save callee saves for stack crawl |
| mov r1, sp |
| bl artTestSuspendFromCode @ (Thread*, SP) |
| RESTORE_REF_ONLY_CALLEE_SAVE_FRAME_AND_RETURN |
| END art_quick_test_suspend |
| |
| ENTRY art_quick_implicit_suspend |
| mov r0, rSELF |
| SETUP_REF_ONLY_CALLEE_SAVE_FRAME @ save callee saves for stack crawl |
| mov r1, sp |
| bl artTestSuspendFromCode @ (Thread*, SP) |
| RESTORE_REF_ONLY_CALLEE_SAVE_FRAME_AND_RETURN |
| END art_quick_implicit_suspend |
| |
| /* |
| * Called by managed code that is attempting to call a method on a proxy class. On entry |
| * r0 holds the proxy method and r1 holds the receiver; r2 and r3 may contain arguments. The |
| * frame size of the invoked proxy method agrees with a ref and args callee save frame. |
| */ |
| .extern artQuickProxyInvokeHandler |
| ENTRY art_quick_proxy_invoke_handler |
| SETUP_REF_AND_ARGS_CALLEE_SAVE_FRAME |
| str r0, [sp, #0] @ place proxy method at bottom of frame |
| mov r2, r9 @ pass Thread::Current |
| mov r3, sp @ pass SP |
| blx artQuickProxyInvokeHandler @ (Method* proxy method, receiver, Thread*, SP) |
| ldr r2, [r9, #THREAD_EXCEPTION_OFFSET] @ load Thread::Current()->exception_ |
| add sp, #16 @ skip r1-r3, 4 bytes padding. |
| .cfi_adjust_cfa_offset -16 |
| cbnz r2, 1f @ success if no exception is pending |
| RESTORE_REF_ONLY_CALLEE_SAVE_FRAME |
| bx lr @ return on success |
| 1: |
| RESTORE_REF_ONLY_CALLEE_SAVE_FRAME |
| DELIVER_PENDING_EXCEPTION |
| END art_quick_proxy_invoke_handler |
| |
| /* |
| * Called to resolve an imt conflict. r12 is a hidden argument that holds the target method's |
| * dex method index. |
| */ |
| ENTRY art_quick_imt_conflict_trampoline |
| ldr r0, [sp, #0] @ load caller Method* |
| ldr r0, [r0, #METHOD_DEX_CACHE_METHODS_OFFSET] @ load dex_cache_resolved_methods |
| add r0, #OBJECT_ARRAY_DATA_OFFSET @ get starting address of data |
| ldr r0, [r0, r12, lsl 2] @ load the target method |
| b art_quick_invoke_interface_trampoline |
| END art_quick_imt_conflict_trampoline |
| |
| .extern artQuickResolutionTrampoline |
| ENTRY art_quick_resolution_trampoline |
| SETUP_REF_AND_ARGS_CALLEE_SAVE_FRAME |
| mov r2, r9 @ pass Thread::Current |
| mov r3, sp @ pass SP |
| blx artQuickResolutionTrampoline @ (Method* called, receiver, Thread*, SP) |
| cbz r0, 1f @ is code pointer null? goto exception |
| mov r12, r0 |
| ldr r0, [sp, #0] @ load resolved method in r0 |
| RESTORE_REF_AND_ARGS_CALLEE_SAVE_FRAME |
| bx r12 @ tail-call into actual code |
| 1: |
| RESTORE_REF_AND_ARGS_CALLEE_SAVE_FRAME |
| DELIVER_PENDING_EXCEPTION |
| END art_quick_resolution_trampoline |
| |
| /* |
| * Called to do a generic JNI down-call |
| */ |
| ENTRY art_quick_generic_jni_trampoline |
| SETUP_REF_AND_ARGS_CALLEE_SAVE_FRAME |
| str r0, [sp, #0] // Store native ArtMethod* to bottom of stack. |
| |
| // Save rSELF |
| mov r11, rSELF |
| // Save SP , so we can have static CFI info. r10 is saved in ref_and_args. |
| mov r10, sp |
| .cfi_def_cfa_register r10 |
| |
| sub sp, sp, #5120 |
| |
| // prepare for artQuickGenericJniTrampoline call |
| // (Thread*, SP) |
| // r0 r1 <= C calling convention |
| // rSELF r10 <= where they are |
| |
| mov r0, rSELF // Thread* |
| mov r1, r10 |
| blx artQuickGenericJniTrampoline // (Thread*, sp) |
| |
| // The C call will have registered the complete save-frame on success. |
| // The result of the call is: |
| // r0: pointer to native code, 0 on error. |
| // r1: pointer to the bottom of the used area of the alloca, can restore stack till there. |
| |
| // Check for error = 0. |
| cbz r0, .Lentry_error |
| |
| // Release part of the alloca. |
| mov sp, r1 |
| |
| // Save the code pointer |
| mov r12, r0 |
| |
| // Load parameters from frame into registers. |
| pop {r0-r3} |
| |
| // Softfloat. |
| // TODO: Change to hardfloat when supported. |
| |
| blx r12 // native call. |
| |
| // result sign extension is handled in C code |
| // prepare for artQuickGenericJniEndTrampoline call |
| // (Thread*, result, result_f) |
| // r0 r1,r2 r3,stack <= C calling convention |
| // r11 r0,r1 r0,r1 <= where they are |
| sub sp, sp, #12 // Stack alignment. |
| |
| push {r1} |
| mov r3, r0 |
| mov r2, r1 |
| mov r1, r0 |
| mov r0, r11 |
| |
| blx artQuickGenericJniEndTrampoline |
| |
| // Tear down the alloca. |
| mov sp, r10 |
| .cfi_def_cfa_register sp |
| |
| // Restore self pointer. |
| mov r9, r11 |
| |
| // Pending exceptions possible. |
| ldr r2, [r9, #THREAD_EXCEPTION_OFFSET] @ load Thread::Current()->exception_ |
| cbnz r2, .Lexception_in_native |
| |
| // Tear down the callee-save frame. |
| RESTORE_REF_AND_ARGS_CALLEE_SAVE_FRAME |
| |
| bx lr // ret |
| |
| .Lentry_error: |
| mov sp, r10 |
| .cfi_def_cfa_register sp |
| mov r9, r11 |
| .Lexception_in_native: |
| RESTORE_REF_AND_ARGS_CALLEE_SAVE_FRAME |
| DELIVER_PENDING_EXCEPTION |
| |
| END art_quick_generic_jni_trampoline |
| |
| .extern artQuickToInterpreterBridge |
| ENTRY art_quick_to_interpreter_bridge |
| SETUP_REF_AND_ARGS_CALLEE_SAVE_FRAME |
| mov r1, r9 @ pass Thread::Current |
| mov r2, sp @ pass SP |
| blx artQuickToInterpreterBridge @ (Method* method, Thread*, SP) |
| ldr r2, [r9, #THREAD_EXCEPTION_OFFSET] @ load Thread::Current()->exception_ |
| add sp, #16 @ skip r1-r3, 4 bytes padding. |
| .cfi_adjust_cfa_offset -16 |
| RESTORE_REF_ONLY_CALLEE_SAVE_FRAME |
| cbnz r2, 1f @ success if no exception is pending |
| bx lr @ return on success |
| 1: |
| DELIVER_PENDING_EXCEPTION |
| END art_quick_to_interpreter_bridge |
| |
| /* |
| * Routine that intercepts method calls and returns. |
| */ |
| .extern artInstrumentationMethodEntryFromCode |
| .extern artInstrumentationMethodExitFromCode |
| ENTRY art_quick_instrumentation_entry |
| SETUP_REF_AND_ARGS_CALLEE_SAVE_FRAME |
| str r0, [sp, #4] @ preserve r0 |
| mov r12, sp @ remember sp |
| str lr, [sp, #-16]! @ expand the frame and pass LR |
| .pad #16 |
| .cfi_adjust_cfa_offset 16 |
| .cfi_rel_offset lr, 0 |
| mov r2, r9 @ pass Thread::Current |
| mov r3, r12 @ pass SP |
| blx artInstrumentationMethodEntryFromCode @ (Method*, Object*, Thread*, SP, LR) |
| add sp, #16 @ remove out argument and padding from stack |
| .cfi_adjust_cfa_offset -16 |
| mov r12, r0 @ r12 holds reference to code |
| ldr r0, [sp, #4] @ restore r0 |
| RESTORE_REF_AND_ARGS_CALLEE_SAVE_FRAME |
| blx r12 @ call method with lr set to art_quick_instrumentation_exit |
| END art_quick_instrumentation_entry |
| .type art_quick_instrumentation_exit, #function |
| .global art_quick_instrumentation_exit |
| art_quick_instrumentation_exit: |
| .cfi_startproc |
| .fnstart |
| mov lr, #0 @ link register is to here, so clobber with 0 for later checks |
| SETUP_REF_ONLY_CALLEE_SAVE_FRAME |
| mov r12, sp @ remember bottom of caller's frame |
| push {r0-r1} @ save return value |
| .save {r0-r1} |
| .cfi_adjust_cfa_offset 8 |
| .cfi_rel_offset r0, 0 |
| .cfi_rel_offset r1, 4 |
| sub sp, #8 @ space for return value argument |
| .pad #8 |
| .cfi_adjust_cfa_offset 8 |
| strd r0, [sp] @ r0/r1 -> [sp] for fpr_res |
| mov r2, r0 @ pass return value as gpr_res |
| mov r3, r1 |
| mov r0, r9 @ pass Thread::Current |
| mov r1, r12 @ pass SP |
| blx artInstrumentationMethodExitFromCode @ (Thread*, SP, gpr_res, fpr_res) |
| add sp, #8 |
| .cfi_adjust_cfa_offset -8 |
| |
| mov r2, r0 @ link register saved by instrumentation |
| mov lr, r1 @ r1 is holding link register if we're to bounce to deoptimize |
| pop {r0, r1} @ restore return value |
| .cfi_restore r0 |
| .cfi_restore r1 |
| add sp, #32 @ remove callee save frame |
| .cfi_adjust_cfa_offset -32 |
| bx r2 @ return |
| END art_quick_instrumentation_exit |
| |
| /* |
| * Instrumentation has requested that we deoptimize into the interpreter. The deoptimization |
| * will long jump to the upcall with a special exception of -1. |
| */ |
| .extern artDeoptimize |
| ENTRY art_quick_deoptimize |
| SETUP_SAVE_ALL_CALLEE_SAVE_FRAME |
| mov r0, r9 @ Set up args. |
| mov r1, sp |
| blx artDeoptimize @ artDeoptimize(Thread*, SP) |
| END art_quick_deoptimize |
| |
| /* |
| * Signed 64-bit integer multiply. |
| * |
| * Consider WXxYZ (r1r0 x r3r2) with a long multiply: |
| * WX |
| * x YZ |
| * -------- |
| * ZW ZX |
| * YW YX |
| * |
| * The low word of the result holds ZX, the high word holds |
| * (ZW+YX) + (the high overflow from ZX). YW doesn't matter because |
| * it doesn't fit in the low 64 bits. |
| * |
| * Unlike most ARM math operations, multiply instructions have |
| * restrictions on using the same register more than once (Rd and Rm |
| * cannot be the same). |
| */ |
| /* mul-long vAA, vBB, vCC */ |
| ENTRY art_quick_mul_long |
| push {r9 - r10} |
| .save {r9 - r10} |
| .cfi_adjust_cfa_offset 8 |
| .cfi_rel_offset r9, 0 |
| .cfi_rel_offset r10, 4 |
| mul ip, r2, r1 @ ip<- ZxW |
| umull r9, r10, r2, r0 @ r9/r10 <- ZxX |
| mla r2, r0, r3, ip @ r2<- YxX + (ZxW) |
| add r10, r2, r10 @ r10<- r10 + low(ZxW + (YxX)) |
| mov r0,r9 |
| mov r1,r10 |
| pop {r9 - r10} |
| .cfi_adjust_cfa_offset -8 |
| .cfi_restore r9 |
| .cfi_restore r10 |
| bx lr |
| END art_quick_mul_long |
| |
| /* |
| * Long integer shift. This is different from the generic 32/64-bit |
| * binary operations because vAA/vBB are 64-bit but vCC (the shift |
| * distance) is 32-bit. Also, Dalvik requires us to ignore all but the low |
| * 6 bits. |
| * On entry: |
| * r0: low word |
| * r1: high word |
| * r2: shift count |
| */ |
| /* shl-long vAA, vBB, vCC */ |
| ARM_ENTRY art_quick_shl_long @ ARM code as thumb code requires spills |
| and r2, r2, #63 @ r2<- r2 & 0x3f |
| mov r1, r1, asl r2 @ r1<- r1 << r2 |
| rsb r3, r2, #32 @ r3<- 32 - r2 |
| orr r1, r1, r0, lsr r3 @ r1<- r1 | (r0 << (32-r2)) |
| subs ip, r2, #32 @ ip<- r2 - 32 |
| movpl r1, r0, asl ip @ if r2 >= 32, r1<- r0 << (r2-32) |
| mov r0, r0, asl r2 @ r0<- r0 << r2 |
| bx lr |
| END art_quick_shl_long |
| |
| /* |
| * Long integer shift. This is different from the generic 32/64-bit |
| * binary operations because vAA/vBB are 64-bit but vCC (the shift |
| * distance) is 32-bit. Also, Dalvik requires us to ignore all but the low |
| * 6 bits. |
| * On entry: |
| * r0: low word |
| * r1: high word |
| * r2: shift count |
| */ |
| /* shr-long vAA, vBB, vCC */ |
| ARM_ENTRY art_quick_shr_long @ ARM code as thumb code requires spills |
| and r2, r2, #63 @ r0<- r0 & 0x3f |
| mov r0, r0, lsr r2 @ r0<- r2 >> r2 |
| rsb r3, r2, #32 @ r3<- 32 - r2 |
| orr r0, r0, r1, asl r3 @ r0<- r0 | (r1 << (32-r2)) |
| subs ip, r2, #32 @ ip<- r2 - 32 |
| movpl r0, r1, asr ip @ if r2 >= 32, r0<-r1 >> (r2-32) |
| mov r1, r1, asr r2 @ r1<- r1 >> r2 |
| bx lr |
| END art_quick_shr_long |
| |
| /* |
| * Long integer shift. This is different from the generic 32/64-bit |
| * binary operations because vAA/vBB are 64-bit but vCC (the shift |
| * distance) is 32-bit. Also, Dalvik requires us to ignore all but the low |
| * 6 bits. |
| * On entry: |
| * r0: low word |
| * r1: high word |
| * r2: shift count |
| */ |
| /* ushr-long vAA, vBB, vCC */ |
| ARM_ENTRY art_quick_ushr_long @ ARM code as thumb code requires spills |
| and r2, r2, #63 @ r0<- r0 & 0x3f |
| mov r0, r0, lsr r2 @ r0<- r2 >> r2 |
| rsb r3, r2, #32 @ r3<- 32 - r2 |
| orr r0, r0, r1, asl r3 @ r0<- r0 | (r1 << (32-r2)) |
| subs ip, r2, #32 @ ip<- r2 - 32 |
| movpl r0, r1, lsr ip @ if r2 >= 32, r0<-r1 >>> (r2-32) |
| mov r1, r1, lsr r2 @ r1<- r1 >>> r2 |
| bx lr |
| END art_quick_ushr_long |
| |
| /* |
| * String's indexOf. |
| * |
| * On entry: |
| * r0: string object (known non-null) |
| * r1: char to match (known <= 0xFFFF) |
| * r2: Starting offset in string data |
| */ |
| ENTRY art_quick_indexof |
| push {r4, r10-r11, lr} @ 4 words of callee saves |
| .save {r4, r10-r11, lr} |
| .cfi_adjust_cfa_offset 16 |
| .cfi_rel_offset r4, 0 |
| .cfi_rel_offset r10, 4 |
| .cfi_rel_offset r11, 8 |
| .cfi_rel_offset lr, 12 |
| ldr r3, [r0, #STRING_COUNT_OFFSET] |
| ldr r12, [r0, #STRING_OFFSET_OFFSET] |
| ldr r0, [r0, #STRING_VALUE_OFFSET] |
| |
| /* Clamp start to [0..count] */ |
| cmp r2, #0 |
| it lt |
| movlt r2, #0 |
| cmp r2, r3 |
| it gt |
| movgt r2, r3 |
| |
| /* Build a pointer to the start of string data */ |
| add r0, #STRING_DATA_OFFSET |
| add r0, r0, r12, lsl #1 |
| |
| /* Save a copy in r12 to later compute result */ |
| mov r12, r0 |
| |
| /* Build pointer to start of data to compare and pre-bias */ |
| add r0, r0, r2, lsl #1 |
| sub r0, #2 |
| |
| /* Compute iteration count */ |
| sub r2, r3, r2 |
| |
| /* |
| * At this point we have: |
| * r0: start of data to test |
| * r1: char to compare |
| * r2: iteration count |
| * r12: original start of string data |
| * r3, r4, r10, r11 available for loading string data |
| */ |
| |
| subs r2, #4 |
| blt .Lindexof_remainder |
| |
| .Lindexof_loop4: |
| ldrh r3, [r0, #2]! |
| ldrh r4, [r0, #2]! |
| ldrh r10, [r0, #2]! |
| ldrh r11, [r0, #2]! |
| cmp r3, r1 |
| beq .Lmatch_0 |
| cmp r4, r1 |
| beq .Lmatch_1 |
| cmp r10, r1 |
| beq .Lmatch_2 |
| cmp r11, r1 |
| beq .Lmatch_3 |
| subs r2, #4 |
| bge .Lindexof_loop4 |
| |
| .Lindexof_remainder: |
| adds r2, #4 |
| beq .Lindexof_nomatch |
| |
| .Lindexof_loop1: |
| ldrh r3, [r0, #2]! |
| cmp r3, r1 |
| beq .Lmatch_3 |
| subs r2, #1 |
| bne .Lindexof_loop1 |
| |
| .Lindexof_nomatch: |
| mov r0, #-1 |
| pop {r4, r10-r11, pc} |
| |
| .Lmatch_0: |
| sub r0, #6 |
| sub r0, r12 |
| asr r0, r0, #1 |
| pop {r4, r10-r11, pc} |
| .Lmatch_1: |
| sub r0, #4 |
| sub r0, r12 |
| asr r0, r0, #1 |
| pop {r4, r10-r11, pc} |
| .Lmatch_2: |
| sub r0, #2 |
| sub r0, r12 |
| asr r0, r0, #1 |
| pop {r4, r10-r11, pc} |
| .Lmatch_3: |
| sub r0, r12 |
| asr r0, r0, #1 |
| pop {r4, r10-r11, pc} |
| END art_quick_indexof |
| |
| /* |
| * String's compareTo. |
| * |
| * Requires rARG0/rARG1 to have been previously checked for null. Will |
| * return negative if this's string is < comp, 0 if they are the |
| * same and positive if >. |
| * |
| * On entry: |
| * r0: this object pointer |
| * r1: comp object pointer |
| * |
| */ |
| .extern __memcmp16 |
| ENTRY art_quick_string_compareto |
| mov r2, r0 @ this to r2, opening up r0 for return value |
| sub r0, r2, r1 @ Same? |
| cbnz r0,1f |
| bx lr |
| 1: @ Same strings, return. |
| |
| push {r4, r7-r12, lr} @ 8 words - keep alignment |
| .save {r4, r7-r12, lr} |
| .cfi_adjust_cfa_offset 32 |
| .cfi_rel_offset r4, 0 |
| .cfi_rel_offset r7, 4 |
| .cfi_rel_offset r8, 8 |
| .cfi_rel_offset r9, 12 |
| .cfi_rel_offset r10, 16 |
| .cfi_rel_offset r11, 20 |
| .cfi_rel_offset r12, 24 |
| .cfi_rel_offset lr, 28 |
| |
| ldr r4, [r2, #STRING_OFFSET_OFFSET] |
| ldr r9, [r1, #STRING_OFFSET_OFFSET] |
| ldr r7, [r2, #STRING_COUNT_OFFSET] |
| ldr r10, [r1, #STRING_COUNT_OFFSET] |
| ldr r2, [r2, #STRING_VALUE_OFFSET] |
| ldr r1, [r1, #STRING_VALUE_OFFSET] |
| |
| /* |
| * At this point, we have: |
| * value: r2/r1 |
| * offset: r4/r9 |
| * count: r7/r10 |
| * We're going to compute |
| * r11 <- countDiff |
| * r10 <- minCount |
| */ |
| subs r11, r7, r10 |
| it ls |
| movls r10, r7 |
| |
| /* Now, build pointers to the string data */ |
| add r2, r2, r4, lsl #1 |
| add r1, r1, r9, lsl #1 |
| /* |
| * Note: data pointers point to previous element so we can use pre-index |
| * mode with base writeback. |
| */ |
| add r2, #STRING_DATA_OFFSET-2 @ offset to contents[-1] |
| add r1, #STRING_DATA_OFFSET-2 @ offset to contents[-1] |
| |
| /* |
| * At this point we have: |
| * r2: *this string data |
| * r1: *comp string data |
| * r10: iteration count for comparison |
| * r11: value to return if the first part of the string is equal |
| * r0: reserved for result |
| * r3, r4, r7, r8, r9, r12 available for loading string data |
| */ |
| |
| subs r10, #2 |
| blt .Ldo_remainder2 |
| |
| /* |
| * Unroll the first two checks so we can quickly catch early mismatch |
| * on long strings (but preserve incoming alignment) |
| */ |
| |
| ldrh r3, [r2, #2]! |
| ldrh r4, [r1, #2]! |
| ldrh r7, [r2, #2]! |
| ldrh r8, [r1, #2]! |
| subs r0, r3, r4 |
| it eq |
| subseq r0, r7, r8 |
| bne .Ldone |
| cmp r10, #28 |
| bgt .Ldo_memcmp16 |
| subs r10, #3 |
| blt .Ldo_remainder |
| |
| .Lloopback_triple: |
| ldrh r3, [r2, #2]! |
| ldrh r4, [r1, #2]! |
| ldrh r7, [r2, #2]! |
| ldrh r8, [r1, #2]! |
| ldrh r9, [r2, #2]! |
| ldrh r12,[r1, #2]! |
| subs r0, r3, r4 |
| it eq |
| subseq r0, r7, r8 |
| it eq |
| subseq r0, r9, r12 |
| bne .Ldone |
| subs r10, #3 |
| bge .Lloopback_triple |
| |
| .Ldo_remainder: |
| adds r10, #3 |
| beq .Lreturn_diff |
| |
| .Lloopback_single: |
| ldrh r3, [r2, #2]! |
| ldrh r4, [r1, #2]! |
| subs r0, r3, r4 |
| bne .Ldone |
| subs r10, #1 |
| bne .Lloopback_single |
| |
| .Lreturn_diff: |
| mov r0, r11 |
| pop {r4, r7-r12, pc} |
| |
| .Ldo_remainder2: |
| adds r10, #2 |
| bne .Lloopback_single |
| mov r0, r11 |
| pop {r4, r7-r12, pc} |
| |
| /* Long string case */ |
| .Ldo_memcmp16: |
| mov r7, r11 |
| add r0, r2, #2 |
| add r1, r1, #2 |
| mov r2, r10 |
| bl __memcmp16 |
| cmp r0, #0 |
| it eq |
| moveq r0, r7 |
| .Ldone: |
| pop {r4, r7-r12, pc} |
| END art_quick_string_compareto |