| # |
| # Copyright (C) 2011 The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| LOCAL_PATH := $(call my-dir) |
| |
| art_path := $(LOCAL_PATH) |
| |
| ######################################################################## |
| # clean-oat rules |
| # |
| |
| include $(art_path)/build/Android.common_path.mk |
| include $(art_path)/build/Android.oat.mk |
| |
| # Following the example of build's dont_bother for clean targets. |
| art_dont_bother := false |
| ifneq (,$(filter clean-oat%,$(MAKECMDGOALS))) |
| art_dont_bother := true |
| endif |
| |
| # Don't bother with tests unless there is a test-art*, build-art*, or related target. |
| art_test_bother := false |
| ifneq (,$(filter tests test-art% valgrind-test-art% build-art% checkbuild,$(MAKECMDGOALS))) |
| art_test_bother := true |
| endif |
| |
| .PHONY: clean-oat |
| clean-oat: clean-oat-host clean-oat-target |
| |
| .PHONY: clean-oat-host |
| clean-oat-host: |
| find $(OUT_DIR) -name "*.oat" -o -name "*.odex" -o -name "*.art" | xargs rm -f |
| ifneq ($(TMPDIR),) |
| rm -rf $(TMPDIR)/$(USER)/test-*/dalvik-cache/* |
| rm -rf $(TMPDIR)/android-data/dalvik-cache/* |
| else |
| rm -rf /tmp/$(USER)/test-*/dalvik-cache/* |
| rm -rf /tmp/android-data/dalvik-cache/* |
| endif |
| |
| .PHONY: clean-oat-target |
| clean-oat-target: |
| adb root |
| adb wait-for-device remount |
| adb shell rm -rf $(ART_TARGET_NATIVETEST_DIR) |
| adb shell rm -rf $(ART_TARGET_TEST_DIR) |
| adb shell rm -rf $(ART_TARGET_DALVIK_CACHE_DIR)/*/* |
| adb shell rm -rf $(DEXPREOPT_BOOT_JAR_DIR)/$(DEX2OAT_TARGET_ARCH) |
| adb shell rm -rf system/app/$(DEX2OAT_TARGET_ARCH) |
| ifdef TARGET_2ND_ARCH |
| adb shell rm -rf $(DEXPREOPT_BOOT_JAR_DIR)/$($(TARGET_2ND_ARCH_VAR_PREFIX)DEX2OAT_TARGET_ARCH) |
| adb shell rm -rf system/app/$($(TARGET_2ND_ARCH_VAR_PREFIX)DEX2OAT_TARGET_ARCH) |
| endif |
| adb shell rm -rf data/run-test/test-*/dalvik-cache/* |
| |
| ifneq ($(art_dont_bother),true) |
| |
| ######################################################################## |
| # cpplint rules to style check art source files |
| |
| include $(art_path)/build/Android.cpplint.mk |
| |
| ######################################################################## |
| # product rules |
| |
| include $(art_path)/dexdump/Android.mk |
| include $(art_path)/dexlayout/Android.mk |
| include $(art_path)/dexlist/Android.mk |
| include $(art_path)/dex2oat/Android.mk |
| include $(art_path)/disassembler/Android.mk |
| include $(art_path)/oatdump/Android.mk |
| include $(art_path)/imgdiag/Android.mk |
| include $(art_path)/patchoat/Android.mk |
| include $(art_path)/profman/Android.mk |
| include $(art_path)/dalvikvm/Android.mk |
| include $(art_path)/tools/Android.mk |
| include $(art_path)/tools/ahat/Android.mk |
| include $(art_path)/tools/dexfuzz/Android.mk |
| include $(art_path)/tools/dmtracedump/Android.mk |
| include $(art_path)/libart_fake/Android.mk |
| |
| |
| # ART_HOST_DEPENDENCIES depends on Android.executable.mk above for ART_HOST_EXECUTABLES |
| ART_HOST_DEPENDENCIES := \ |
| $(ART_HOST_EXECUTABLES) \ |
| $(ART_HOST_DEX_DEPENDENCIES) \ |
| $(ART_HOST_SHARED_LIBRARY_DEPENDENCIES) |
| ART_TARGET_DEPENDENCIES := \ |
| $(ART_TARGET_EXECUTABLES) \ |
| $(ART_TARGET_DEX_DEPENDENCIES) \ |
| $(ART_TARGET_SHARED_LIBRARY_DEPENDENCIES) |
| |
| ######################################################################## |
| # test rules |
| |
| ifeq ($(art_test_bother),true) |
| |
| # All the dependencies that must be built ahead of sync-ing them onto the target device. |
| TEST_ART_TARGET_SYNC_DEPS := |
| |
| include $(art_path)/build/Android.common_test.mk |
| include $(art_path)/build/Android.gtest.mk |
| include $(art_path)/test/Android.run-test.mk |
| include $(art_path)/benchmark/Android.mk |
| |
| TEST_ART_ADB_ROOT_AND_REMOUNT := \ |
| (adb root && \ |
| adb wait-for-device remount && \ |
| ((adb shell touch /system/testfile && \ |
| (adb shell rm /system/testfile || true)) || \ |
| (adb disable-verity && \ |
| adb reboot && \ |
| adb wait-for-device root && \ |
| adb wait-for-device remount))) |
| |
| # Sync test files to the target, depends upon all things that must be pushed to the target. |
| .PHONY: test-art-target-sync |
| # Check if we need to sync. In case ART_TEST_ANDROID_ROOT is not empty, |
| # the code below uses 'adb push' instead of 'adb sync', which does not |
| # check if the files on the device have changed. |
| ifneq ($(ART_TEST_NO_SYNC),true) |
| ifeq ($(ART_TEST_ANDROID_ROOT),) |
| test-art-target-sync: $(TEST_ART_TARGET_SYNC_DEPS) |
| $(TEST_ART_ADB_ROOT_AND_REMOUNT) |
| adb sync |
| else |
| test-art-target-sync: $(TEST_ART_TARGET_SYNC_DEPS) |
| $(TEST_ART_ADB_ROOT_AND_REMOUNT) |
| adb wait-for-device push $(ANDROID_PRODUCT_OUT)/system $(ART_TEST_ANDROID_ROOT) |
| # Push the contents of the `data` dir into `/data` on the device. If |
| # `/data` already exists on the device, it is not overwritten, but its |
| # contents are updated. |
| adb push $(ANDROID_PRODUCT_OUT)/data / |
| endif |
| endif |
| |
| # "mm test-art" to build and run all tests on host and device |
| .PHONY: test-art |
| test-art: test-art-host test-art-target |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: test-art-gtest |
| test-art-gtest: test-art-host-gtest test-art-target-gtest |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: test-art-run-test |
| test-art-run-test: test-art-host-run-test test-art-target-run-test |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| ######################################################################## |
| # host test rules |
| |
| VIXL_TEST_DEPENDENCY := |
| # We can only run the vixl tests on 64-bit hosts (vixl testing issue) when its a |
| # top-level build (to declare the vixl test rule). |
| ifneq ($(HOST_PREFER_32_BIT),true) |
| ifeq ($(ONE_SHOT_MAKEFILE),) |
| VIXL_TEST_DEPENDENCY := run-vixl-tests |
| endif |
| endif |
| |
| .PHONY: test-art-host-vixl |
| test-art-host-vixl: $(VIXL_TEST_DEPENDENCY) |
| |
| # "mm test-art-host" to build and run all host tests. |
| .PHONY: test-art-host |
| test-art-host: test-art-host-gtest test-art-host-run-test \ |
| test-art-host-vixl test-art-host-dexdump |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| # All host tests that run solely with the default compiler. |
| .PHONY: test-art-host-default |
| test-art-host-default: test-art-host-run-test-default |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| # All host tests that run solely with the optimizing compiler. |
| .PHONY: test-art-host-optimizing |
| test-art-host-optimizing: test-art-host-run-test-optimizing |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| # All host tests that run solely on the interpreter. |
| .PHONY: test-art-host-interpreter |
| test-art-host-interpreter: test-art-host-run-test-interpreter |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| # All host tests that run solely on the jit. |
| .PHONY: test-art-host-jit |
| test-art-host-jit: test-art-host-run-test-jit |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| # Primary host architecture variants: |
| .PHONY: test-art-host$(ART_PHONY_TEST_HOST_SUFFIX) |
| test-art-host$(ART_PHONY_TEST_HOST_SUFFIX): test-art-host-gtest$(ART_PHONY_TEST_HOST_SUFFIX) \ |
| test-art-host-run-test$(ART_PHONY_TEST_HOST_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: test-art-host-default$(ART_PHONY_TEST_HOST_SUFFIX) |
| test-art-host-default$(ART_PHONY_TEST_HOST_SUFFIX): test-art-host-run-test-default$(ART_PHONY_TEST_HOST_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: test-art-host-optimizing$(ART_PHONY_TEST_HOST_SUFFIX) |
| test-art-host-optimizing$(ART_PHONY_TEST_HOST_SUFFIX): test-art-host-run-test-optimizing$(ART_PHONY_TEST_HOST_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: test-art-host-interpreter$(ART_PHONY_TEST_HOST_SUFFIX) |
| test-art-host-interpreter$(ART_PHONY_TEST_HOST_SUFFIX): test-art-host-run-test-interpreter$(ART_PHONY_TEST_HOST_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: test-art-host-jit$(ART_PHONY_TEST_HOST_SUFFIX) |
| test-art-host-jit$(ART_PHONY_TEST_HOST_SUFFIX): test-art-host-run-test-jit$(ART_PHONY_TEST_HOST_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| # Secondary host architecture variants: |
| ifneq ($(HOST_PREFER_32_BIT),true) |
| .PHONY: test-art-host$(2ND_ART_PHONY_TEST_HOST_SUFFIX) |
| test-art-host$(2ND_ART_PHONY_TEST_HOST_SUFFIX): test-art-host-gtest$(2ND_ART_PHONY_TEST_HOST_SUFFIX) \ |
| test-art-host-run-test$(2ND_ART_PHONY_TEST_HOST_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: test-art-host-default$(2ND_ART_PHONY_TEST_HOST_SUFFIX) |
| test-art-host-default$(2ND_ART_PHONY_TEST_HOST_SUFFIX): test-art-host-run-test-default$(2ND_ART_PHONY_TEST_HOST_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: test-art-host-optimizing$(2ND_ART_PHONY_TEST_HOST_SUFFIX) |
| test-art-host-optimizing$(2ND_ART_PHONY_TEST_HOST_SUFFIX): test-art-host-run-test-optimizing$(2ND_ART_PHONY_TEST_HOST_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: test-art-host-interpreter$(2ND_ART_PHONY_TEST_HOST_SUFFIX) |
| test-art-host-interpreter$(2ND_ART_PHONY_TEST_HOST_SUFFIX): test-art-host-run-test-interpreter$(2ND_ART_PHONY_TEST_HOST_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: test-art-host-jit$(2ND_ART_PHONY_TEST_HOST_SUFFIX) |
| test-art-host-jit$(2ND_ART_PHONY_TEST_HOST_SUFFIX): test-art-host-run-test-jit$(2ND_ART_PHONY_TEST_HOST_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| endif |
| |
| # Dexdump/list regression test. |
| .PHONY: test-art-host-dexdump |
| test-art-host-dexdump: $(addprefix $(HOST_OUT_EXECUTABLES)/, dexdump2 dexlist) |
| ANDROID_HOST_OUT=$(realpath $(HOST_OUT)) art/test/dexdump/run-all-tests |
| |
| # Valgrind. |
| .PHONY: valgrind-test-art-host |
| valgrind-test-art-host: valgrind-test-art-host-gtest |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: valgrind-test-art-host32 |
| valgrind-test-art-host32: valgrind-test-art-host-gtest32 |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: valgrind-test-art-host64 |
| valgrind-test-art-host64: valgrind-test-art-host-gtest64 |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| ######################################################################## |
| # target test rules |
| |
| # "mm test-art-target" to build and run all target tests. |
| .PHONY: test-art-target |
| test-art-target: test-art-target-gtest test-art-target-run-test |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| # All target tests that run solely with the default compiler. |
| .PHONY: test-art-target-default |
| test-art-target-default: test-art-target-run-test-default |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| # All target tests that run solely with the optimizing compiler. |
| .PHONY: test-art-target-optimizing |
| test-art-target-optimizing: test-art-target-run-test-optimizing |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| # All target tests that run solely on the interpreter. |
| .PHONY: test-art-target-interpreter |
| test-art-target-interpreter: test-art-target-run-test-interpreter |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| # All target tests that run solely on the jit. |
| .PHONY: test-art-target-jit |
| test-art-target-jit: test-art-target-run-test-jit |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| # Primary target architecture variants: |
| .PHONY: test-art-target$(ART_PHONY_TEST_TARGET_SUFFIX) |
| test-art-target$(ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-gtest$(ART_PHONY_TEST_TARGET_SUFFIX) \ |
| test-art-target-run-test$(ART_PHONY_TEST_TARGET_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: test-art-target-default$(ART_PHONY_TEST_TARGET_SUFFIX) |
| test-art-target-default$(ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-run-test-default$(ART_PHONY_TEST_TARGET_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: test-art-target-optimizing$(ART_PHONY_TEST_TARGET_SUFFIX) |
| test-art-target-optimizing$(ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-run-test-optimizing$(ART_PHONY_TEST_TARGET_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: test-art-target-interpreter$(ART_PHONY_TEST_TARGET_SUFFIX) |
| test-art-target-interpreter$(ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-run-test-interpreter$(ART_PHONY_TEST_TARGET_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: test-art-target-jit$(ART_PHONY_TEST_TARGET_SUFFIX) |
| test-art-target-jit$(ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-run-test-jit$(ART_PHONY_TEST_TARGET_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| # Secondary target architecture variants: |
| ifdef TARGET_2ND_ARCH |
| .PHONY: test-art-target$(2ND_ART_PHONY_TEST_TARGET_SUFFIX) |
| test-art-target$(2ND_ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-gtest$(2ND_ART_PHONY_TEST_TARGET_SUFFIX) \ |
| test-art-target-run-test$(2ND_ART_PHONY_TEST_TARGET_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: test-art-target-default$(2ND_ART_PHONY_TEST_TARGET_SUFFIX) |
| test-art-target-default$(2ND_ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-run-test-default$(2ND_ART_PHONY_TEST_TARGET_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: test-art-target-optimizing$(2ND_ART_PHONY_TEST_TARGET_SUFFIX) |
| test-art-target-optimizing$(2ND_ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-run-test-optimizing$(2ND_ART_PHONY_TEST_TARGET_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: test-art-target-interpreter$(2ND_ART_PHONY_TEST_TARGET_SUFFIX) |
| test-art-target-interpreter$(2ND_ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-run-test-interpreter$(2ND_ART_PHONY_TEST_TARGET_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: test-art-target-jit$(2ND_ART_PHONY_TEST_TARGET_SUFFIX) |
| test-art-target-jit$(2ND_ART_PHONY_TEST_TARGET_SUFFIX): test-art-target-run-test-jit$(2ND_ART_PHONY_TEST_TARGET_SUFFIX) |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| endif |
| |
| endif # art_test_bother |
| |
| # Valgrind. |
| .PHONY: valgrind-test-art-target |
| valgrind-test-art-target: valgrind-test-art-target-gtest |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: valgrind-test-art-target32 |
| valgrind-test-art-target32: valgrind-test-art-target-gtest32 |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| .PHONY: valgrind-test-art-target64 |
| valgrind-test-art-target64: valgrind-test-art-target-gtest64 |
| $(hide) $(call ART_TEST_PREREQ_FINISHED,$@) |
| |
| ######################################################################## |
| # oat-target and oat-target-sync rules |
| |
| OAT_TARGET_RULES := |
| |
| # $(1): input jar or apk target location |
| define declare-oat-target-target |
| OUT_OAT_FILE := $(PRODUCT_OUT)/$(basename $(1)).odex |
| |
| ifeq ($(ONE_SHOT_MAKEFILE),) |
| # ONE_SHOT_MAKEFILE is empty for a top level build and we don't want |
| # to define the oat-target-* rules there because they will conflict |
| # with the build/core/dex_preopt.mk defined rules. |
| .PHONY: oat-target-$(1) |
| oat-target-$(1): |
| |
| else |
| .PHONY: oat-target-$(1) |
| oat-target-$(1): $$(OUT_OAT_FILE) |
| |
| $$(OUT_OAT_FILE): $(PRODUCT_OUT)/$(1) $(DEFAULT_DEX_PREOPT_BUILT_IMAGE) $(DEX2OAT_DEPENDENCY) |
| @mkdir -p $$(dir $$@) |
| $(DEX2OAT) --runtime-arg -Xms$(DEX2OAT_XMS) --runtime-arg -Xmx$(DEX2OAT_XMX) \ |
| --boot-image=$(DEFAULT_DEX_PREOPT_BUILT_IMAGE) --dex-file=$(PRODUCT_OUT)/$(1) \ |
| --dex-location=/$(1) --oat-file=$$@ \ |
| --instruction-set=$(DEX2OAT_TARGET_ARCH) \ |
| --instruction-set-variant=$(DEX2OAT_TARGET_CPU_VARIANT) \ |
| --instruction-set-features=$(DEX2OAT_TARGET_INSTRUCTION_SET_FEATURES) \ |
| --android-root=$(PRODUCT_OUT)/system --include-patch-information \ |
| --runtime-arg -Xnorelocate |
| |
| endif |
| |
| OAT_TARGET_RULES += oat-target-$(1) |
| endef |
| |
| $(foreach file,\ |
| $(filter-out\ |
| $(addprefix $(TARGET_OUT_JAVA_LIBRARIES)/,$(addsuffix .jar,$(LIBART_TARGET_BOOT_JARS))),\ |
| $(wildcard $(TARGET_OUT_APPS)/*.apk) $(wildcard $(TARGET_OUT_JAVA_LIBRARIES)/*.jar)),\ |
| $(eval $(call declare-oat-target-target,$(subst $(PRODUCT_OUT)/,,$(file))))) |
| |
| .PHONY: oat-target |
| oat-target: $(ART_TARGET_DEPENDENCIES) $(DEFAULT_DEX_PREOPT_INSTALLED_IMAGE) $(OAT_TARGET_RULES) |
| |
| .PHONY: oat-target-sync |
| oat-target-sync: oat-target |
| $(TEST_ART_ADB_ROOT_AND_REMOUNT) |
| adb sync |
| |
| #################################################################################################### |
| # Fake packages to ensure generation of libopenjdkd when one builds with mm/mmm/mmma. |
| # |
| # The library is required for starting a runtime in debug mode, but libartd does not depend on it |
| # (dependency cycle otherwise). |
| # |
| # Note: * As the package is phony to create a dependency the package name is irrelevant. |
| # * We make MULTILIB explicit to "both," just to state here that we want both libraries on |
| # 64-bit systems, even if it is the default. |
| |
| # ART on the host. |
| ifeq ($(ART_BUILD_HOST_DEBUG),true) |
| include $(CLEAR_VARS) |
| LOCAL_MODULE := art-libartd-libopenjdkd-host-dependency |
| LOCAL_MULTILIB := both |
| LOCAL_REQUIRED_MODULES := libopenjdkd |
| LOCAL_IS_HOST_MODULE := true |
| include $(BUILD_PHONY_PACKAGE) |
| endif |
| |
| # ART on the target. |
| ifeq ($(ART_BUILD_TARGET_DEBUG),true) |
| include $(CLEAR_VARS) |
| LOCAL_MODULE := art-libartd-libopenjdkd-target-dependency |
| LOCAL_MULTILIB := both |
| LOCAL_REQUIRED_MODULES := libopenjdkd |
| include $(BUILD_PHONY_PACKAGE) |
| endif |
| |
| ######################################################################## |
| # "m build-art" for quick minimal build |
| .PHONY: build-art |
| build-art: build-art-host build-art-target |
| |
| .PHONY: build-art-host |
| build-art-host: $(HOST_OUT_EXECUTABLES)/art $(ART_HOST_DEPENDENCIES) $(HOST_CORE_IMG_OUTS) |
| |
| .PHONY: build-art-target |
| build-art-target: $(TARGET_OUT_EXECUTABLES)/art $(ART_TARGET_DEPENDENCIES) $(TARGET_CORE_IMG_OUTS) |
| |
| ######################################################################## |
| # Rules for building all dependencies for tests. |
| |
| .PHONY: build-art-host-tests |
| build-art-host-tests: build-art-host $(TEST_ART_RUN_TEST_DEPENDENCIES) $(ART_TEST_HOST_RUN_TEST_DEPENDENCIES) $(ART_TEST_HOST_GTEST_DEPENDENCIES) | $(TEST_ART_RUN_TEST_ORDERONLY_DEPENDENCIES) |
| |
| .PHONY: build-art-target-tests |
| build-art-target-tests: build-art-target $(TEST_ART_RUN_TEST_DEPENDENCIES) $(TEST_ART_TARGET_SYNC_DEPS) | $(TEST_ART_RUN_TEST_ORDERONLY_DEPENDENCIES) |
| |
| ######################################################################## |
| # targets to switch back and forth from libdvm to libart |
| |
| .PHONY: use-art |
| use-art: |
| adb root |
| adb wait-for-device shell stop |
| adb shell setprop persist.sys.dalvik.vm.lib.2 libart.so |
| adb shell start |
| |
| .PHONY: use-artd |
| use-artd: |
| adb root |
| adb wait-for-device shell stop |
| adb shell setprop persist.sys.dalvik.vm.lib.2 libartd.so |
| adb shell start |
| |
| .PHONY: use-dalvik |
| use-dalvik: |
| adb root |
| adb wait-for-device shell stop |
| adb shell setprop persist.sys.dalvik.vm.lib.2 libdvm.so |
| adb shell start |
| |
| .PHONY: use-art-full |
| use-art-full: |
| adb root |
| adb wait-for-device shell stop |
| adb shell rm -rf $(ART_TARGET_DALVIK_CACHE_DIR)/* |
| adb shell setprop dalvik.vm.dex2oat-filter \"\" |
| adb shell setprop dalvik.vm.image-dex2oat-filter \"\" |
| adb shell setprop persist.sys.dalvik.vm.lib.2 libart.so |
| adb shell setprop dalvik.vm.usejit false |
| adb shell start |
| |
| .PHONY: use-artd-full |
| use-artd-full: |
| adb root |
| adb wait-for-device shell stop |
| adb shell rm -rf $(ART_TARGET_DALVIK_CACHE_DIR)/* |
| adb shell setprop dalvik.vm.dex2oat-filter \"\" |
| adb shell setprop dalvik.vm.image-dex2oat-filter \"\" |
| adb shell setprop persist.sys.dalvik.vm.lib.2 libartd.so |
| adb shell setprop dalvik.vm.usejit false |
| adb shell start |
| |
| .PHONY: use-art-jit |
| use-art-jit: |
| adb root |
| adb wait-for-device shell stop |
| adb shell rm -rf $(ART_TARGET_DALVIK_CACHE_DIR)/* |
| adb shell setprop dalvik.vm.dex2oat-filter "verify-at-runtime" |
| adb shell setprop dalvik.vm.image-dex2oat-filter "verify-at-runtime" |
| adb shell setprop persist.sys.dalvik.vm.lib.2 libart.so |
| adb shell setprop dalvik.vm.usejit true |
| adb shell start |
| |
| .PHONY: use-art-interpret-only |
| use-art-interpret-only: |
| adb root |
| adb wait-for-device shell stop |
| adb shell rm -rf $(ART_TARGET_DALVIK_CACHE_DIR)/* |
| adb shell setprop dalvik.vm.dex2oat-filter "interpret-only" |
| adb shell setprop dalvik.vm.image-dex2oat-filter "interpret-only" |
| adb shell setprop persist.sys.dalvik.vm.lib.2 libart.so |
| adb shell setprop dalvik.vm.usejit false |
| adb shell start |
| |
| .PHONY: use-artd-interpret-only |
| use-artd-interpret-only: |
| adb root |
| adb wait-for-device shell stop |
| adb shell rm -rf $(ART_TARGET_DALVIK_CACHE_DIR)/* |
| adb shell setprop dalvik.vm.dex2oat-filter "interpret-only" |
| adb shell setprop dalvik.vm.image-dex2oat-filter "interpret-only" |
| adb shell setprop persist.sys.dalvik.vm.lib.2 libartd.so |
| adb shell setprop dalvik.vm.usejit false |
| adb shell start |
| |
| .PHONY: use-art-verify-none |
| use-art-verify-none: |
| adb root |
| adb wait-for-device shell stop |
| adb shell rm -rf $(ART_TARGET_DALVIK_CACHE_DIR)/* |
| adb shell setprop dalvik.vm.dex2oat-filter "verify-none" |
| adb shell setprop dalvik.vm.image-dex2oat-filter "verify-none" |
| adb shell setprop persist.sys.dalvik.vm.lib.2 libart.so |
| adb shell setprop dalvik.vm.usejit false |
| adb shell start |
| |
| ######################################################################## |
| |
| endif # !art_dont_bother |
| |
| # Clear locally used variables. |
| art_dont_bother := |
| art_test_bother := |
| TEST_ART_TARGET_SYNC_DEPS := |
| |
| # Helper target that depends on boot image creation. |
| # |
| # Can be used, for example, to dump initialization failures: |
| # m art-boot-image ART_BOOT_IMAGE_EXTRA_ARGS=--dump-init-failures=fails.txt |
| .PHONY: art-boot-image |
| art-boot-image: $(DEFAULT_DEX_PREOPT_BUILT_IMAGE_FILENAME) |