build/Android.common_test.mk - platform/art - Gitiles

 #
 # Copyright (C) 2011 The Android Open Source Project
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 #      http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
 #

 ifndef ART_ANDROID_COMMON_TEST_MK
 ART_ANDROID_COMMON_TEST_MK = true

 include art/build/Android.common_path.mk

 # We need to set a define for the nativetest dir so that common_runtime_test will know the right
 # path. (The problem is being a 32b test on 64b device, which is still located in nativetest64).
 ART_TARGET_CFLAGS += -DART_TARGET_NATIVETEST_DIR=${ART_TARGET_NATIVETEST_DIR}

 # List of known broken tests that we won't attempt to execute. The test name must be the full
 # rule name such as test-art-host-oat-optimizing-HelloWorld64.
 ART_TEST_KNOWN_BROKEN :=

 # Failing valgrind tests.
 # Note: *all* 64b tests involving the runtime do not work currently. b/15170219.

 # List of known failing tests that when executed won't cause test execution to not finish.
 # The test name must be the full rule name such as test-art-host-oat-optimizing-HelloWorld64.
 ART_TEST_KNOWN_FAILING :=

 # Keep going after encountering a test failure?
 ART_TEST_KEEP_GOING ?= true

 # Do you want all tests, even those that are time consuming?
 ART_TEST_FULL ?= false

 # Do you want default compiler tests run?
 ART_TEST_DEFAULT_COMPILER ?= true

 # Do you want interpreter tests run?
 ART_TEST_INTERPRETER ?= $(ART_TEST_FULL)

 # Do you want JIT tests run?
 ART_TEST_JIT ?= $(ART_TEST_FULL)

 # Do you want optimizing compiler tests run?
 ART_TEST_OPTIMIZING ?= $(ART_TEST_FULL)

 # Do we want to test a PIC-compiled core image?
 ART_TEST_PIC_IMAGE ?= $(ART_TEST_FULL)

 # Do we want to test PIC-compiled tests ("apps")?
 ART_TEST_PIC_TEST ?= $(ART_TEST_FULL)

 # Do you want tracing tests run?
 ART_TEST_TRACE ?= $(ART_TEST_FULL)

 # Do you want tests with GC verification enabled run?
 ART_TEST_GC_VERIFY ?= $(ART_TEST_FULL)

 # Do you want tests with the GC stress mode enabled run?
 ART_TEST_GC_STRESS ?= $(ART_TEST_FULL)

 # Do you want tests with the JNI forcecopy mode enabled run?
 ART_TEST_JNI_FORCECOPY ?= $(ART_TEST_FULL)

 # Do you want run-tests with relocation disabled run?
 ART_TEST_RUN_TEST_NO_RELOCATE ?= $(ART_TEST_FULL)

 # Do you want run-tests with prebuilding?
 ART_TEST_RUN_TEST_PREBUILD ?= true

 # Do you want run-tests with no prebuilding enabled run?
 ART_TEST_RUN_TEST_NO_PREBUILD ?= $(ART_TEST_FULL)

 # Do you want run-tests without a pregenerated core.art?
 ART_TEST_RUN_TEST_NO_IMAGE ?= $(ART_TEST_FULL)

 # Do you want run-tests with relocation enabled but patchoat failing?
 ART_TEST_RUN_TEST_RELOCATE_NO_PATCHOAT ?= $(ART_TEST_FULL)

 # Do you want run-tests without a dex2oat?
 ART_TEST_RUN_TEST_NO_DEX2OAT ?= $(ART_TEST_FULL)

 # Do you want run-tests with libartd.so?
 ART_TEST_RUN_TEST_DEBUG ?= true

 # Do you want run-tests with libart.so?
 ART_TEST_RUN_TEST_NDEBUG ?= $(ART_TEST_FULL)

 # Do you want run-tests with the host/target's second arch?
 ART_TEST_RUN_TEST_2ND_ARCH ?= true

 # Do you want failed tests to have their artifacts cleaned up?
 ART_TEST_RUN_TEST_ALWAYS_CLEAN ?= true

 # Do you want run-tests with the --debuggable flag
 ART_TEST_RUN_TEST_DEBUGGABLE ?= $(ART_TEST_FULL)

 # Define the command run on test failure. $(1) is the name of the test. Executed by the shell.
 define ART_TEST_FAILED
   ( [ -f $(ART_HOST_TEST_DIR)/skipped/$(1) ] || \
     (mkdir -p $(ART_HOST_TEST_DIR)/failed/ && touch $(ART_HOST_TEST_DIR)/failed/$(1) && \
       echo $(ART_TEST_KNOWN_FAILING) | grep -q $(1) \
         && (echo -e "$(1) \e[91mKNOWN FAILURE\e[0m") \
         || (echo -e "$(1) \e[91mFAILED\e[0m" >&2 )))
 endef

 # Define the command run on test success. $(1) is the name of the test. Executed by the shell.
 # The command checks prints "PASSED" then checks to see if this was a top-level make target (e.g.
 # "mm test-art-host-oat-HelloWorld32"), if it was then it does nothing, otherwise it creates a file
 # to be printed in the passing test summary.
 define ART_TEST_PASSED
   ( echo -e "$(1) \e[92mPASSED\e[0m" && \
     (echo $(MAKECMDGOALS) | grep -q $(1) || \
       (mkdir -p $(ART_HOST_TEST_DIR)/passed/ && touch $(ART_HOST_TEST_DIR)/passed/$(1))))
 endef

 # Define the command run on test success of multiple prerequisites. $(1) is the name of the test.
 # When the test is a top-level make target then a summary of the ran tests is produced. Executed by
 # the shell.
 define ART_TEST_PREREQ_FINISHED
   (echo -e "$(1) \e[32mCOMPLETE\e[0m" && \
     (echo $(MAKECMDGOALS) | grep -q -v $(1) || \
       (([ -d $(ART_HOST_TEST_DIR)/passed/ ] \
         && (echo -e "\e[92mPASSING TESTS\e[0m" && ls -1 $(ART_HOST_TEST_DIR)/passed/) \
         || (echo -e "\e[91mNO TESTS PASSED\e[0m")) && \
       ([ -d $(ART_HOST_TEST_DIR)/skipped/ ] \
         && (echo -e "\e[93mSKIPPED TESTS\e[0m" && ls -1 $(ART_HOST_TEST_DIR)/skipped/) \
         || (echo -e "\e[92mNO TESTS SKIPPED\e[0m")) && \
       ([ -d $(ART_HOST_TEST_DIR)/failed/ ] \
         && (echo -e "\e[91mFAILING TESTS\e[0m" >&2 && ls -1 $(ART_HOST_TEST_DIR)/failed/ >&2) \
         || (echo -e "\e[92mNO TESTS FAILED\e[0m")) \
       && ([ ! -d $(ART_HOST_TEST_DIR)/failed/ ] && rm -r $(ART_HOST_TEST_DIR) \
           || (rm -r $(ART_HOST_TEST_DIR) && false)))))
 endef

 # Define the command executed by the shell ahead of running an art test. $(1) is the name of the
 # test.
 define ART_TEST_SKIP
   ((echo $(ART_TEST_KNOWN_BROKEN) | grep -q -v $(1) \
      && ([ ! -d $(ART_HOST_TEST_DIR)/failed/ ] || [ $(ART_TEST_KEEP_GOING) = true ])\
      && echo -e "$(1) \e[95mRUNNING\e[0m") \
    || ((mkdir -p $(ART_HOST_TEST_DIR)/skipped/ && touch $(ART_HOST_TEST_DIR)/skipped/$(1) \
      && ([ -d $(ART_HOST_TEST_DIR)/failed/ ] \
        && echo -e "$(1) \e[93mSKIPPING DUE TO EARLIER FAILURE\e[0m") \
      || echo -e "$(1) \e[93mSKIPPING BROKEN TEST\e[0m") && false))
 endef

 # Create a build rule to create the dex file for a test.
 # $(1): module prefix, e.g. art-test-dex
 # $(2): input test directory in art/test, e.g. HelloWorld
 # $(3): target output module path (default module path is used on host)
 # $(4): additional dependencies
 # $(5): a make variable used to collate target dependencies, e.g ART_TEST_TARGET_OAT_HelloWorld_DEX
 # $(6): a make variable used to collate host dependencies, e.g ART_TEST_HOST_OAT_HelloWorld_DEX
 #
 # If the input test directory contains a file called main.list and main.jpp,
 # then a multi-dex file is created passing main.list as the --main-dex-list
 # argument to dx and main.jpp for Jack.
 define build-art-test-dex
   ifeq ($(ART_BUILD_TARGET),true)
     include $(CLEAR_VARS)
     LOCAL_MODULE := $(1)-$(2)
     LOCAL_SRC_FILES := $(call all-java-files-under, $(2))
     LOCAL_NO_STANDARD_LIBRARIES := true
     LOCAL_DEX_PREOPT := false
     LOCAL_ADDITIONAL_DEPENDENCIES := art/build/Android.common_test.mk $(4)
     LOCAL_MODULE_TAGS := tests
     LOCAL_JAVA_LIBRARIES := $(TARGET_CORE_JARS)
     LOCAL_MODULE_PATH := $(3)
     LOCAL_DEX_PREOPT_IMAGE_LOCATION := $(TARGET_CORE_IMG_OUT)
     ifneq ($(wildcard $(LOCAL_PATH)/$(2)/main.list),)
       LOCAL_DX_FLAGS := --multi-dex --main-dex-list=$(LOCAL_PATH)/$(2)/main.list --minimal-main-dex
       LOCAL_JACK_FLAGS := -D jack.dex.output.policy=minimal-multidex -D jack.preprocessor=true -D jack.preprocessor.file=$(LOCAL_PATH)/$(2)/main.jpp
     endif
     include $(BUILD_JAVA_LIBRARY)
     $(5) := $$(LOCAL_INSTALLED_MODULE)
   endif
   ifeq ($(ART_BUILD_HOST),true)
     include $(CLEAR_VARS)
     LOCAL_MODULE := $(1)-$(2)
     LOCAL_SRC_FILES := $(call all-java-files-under, $(2))
     LOCAL_NO_STANDARD_LIBRARIES := true
     LOCAL_DEX_PREOPT := false
     LOCAL_ADDITIONAL_DEPENDENCIES := art/build/Android.common_test.mk $(4)
     LOCAL_JAVA_LIBRARIES := $(HOST_CORE_JARS)
     LOCAL_DEX_PREOPT_IMAGE := $(HOST_CORE_IMG_LOCATION)
     ifneq ($(wildcard $(LOCAL_PATH)/$(2)/main.list),)
       LOCAL_DX_FLAGS := --multi-dex --main-dex-list=$(LOCAL_PATH)/$(2)/main.list --minimal-main-dex
       LOCAL_JACK_FLAGS := -D jack.dex.output.policy=minimal-multidex -D jack.preprocessor=true -D jack.preprocessor.file=$(LOCAL_PATH)/$(2)/main.jpp
     endif
     include $(BUILD_HOST_DALVIK_JAVA_LIBRARY)
     $(6) := $$(LOCAL_INSTALLED_MODULE)
   endif
 endef

 endif # ART_ANDROID_COMMON_TEST_MK
	#
	# Copyright (C) 2011 The Android Open Source Project
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	#

	ifndef ART_ANDROID_COMMON_TEST_MK
	ART_ANDROID_COMMON_TEST_MK = true

	include art/build/Android.common_path.mk

	# We need to set a define for the nativetest dir so that common_runtime_test will know the right
	# path. (The problem is being a 32b test on 64b device, which is still located in nativetest64).
	ART_TARGET_CFLAGS += -DART_TARGET_NATIVETEST_DIR=${ART_TARGET_NATIVETEST_DIR}

	# List of known broken tests that we won't attempt to execute. The test name must be the full
	# rule name such as test-art-host-oat-optimizing-HelloWorld64.
	ART_TEST_KNOWN_BROKEN :=

	# Failing valgrind tests.
	# Note: all 64b tests involving the runtime do not work currently. b/15170219.

	# List of known failing tests that when executed won't cause test execution to not finish.
	# The test name must be the full rule name such as test-art-host-oat-optimizing-HelloWorld64.
	ART_TEST_KNOWN_FAILING :=

	# Keep going after encountering a test failure?
	ART_TEST_KEEP_GOING ?= true

	# Do you want all tests, even those that are time consuming?
	ART_TEST_FULL ?= false

	# Do you want default compiler tests run?
	ART_TEST_DEFAULT_COMPILER ?= true

	# Do you want interpreter tests run?
	ART_TEST_INTERPRETER ?= $(ART_TEST_FULL)

	# Do you want JIT tests run?
	ART_TEST_JIT ?= $(ART_TEST_FULL)

	# Do you want optimizing compiler tests run?
	ART_TEST_OPTIMIZING ?= $(ART_TEST_FULL)

	# Do we want to test a PIC-compiled core image?
	ART_TEST_PIC_IMAGE ?= $(ART_TEST_FULL)

	# Do we want to test PIC-compiled tests ("apps")?
	ART_TEST_PIC_TEST ?= $(ART_TEST_FULL)

	# Do you want tracing tests run?
	ART_TEST_TRACE ?= $(ART_TEST_FULL)

	# Do you want tests with GC verification enabled run?
	ART_TEST_GC_VERIFY ?= $(ART_TEST_FULL)

	# Do you want tests with the GC stress mode enabled run?
	ART_TEST_GC_STRESS ?= $(ART_TEST_FULL)

	# Do you want tests with the JNI forcecopy mode enabled run?
	ART_TEST_JNI_FORCECOPY ?= $(ART_TEST_FULL)

	# Do you want run-tests with relocation disabled run?
	ART_TEST_RUN_TEST_NO_RELOCATE ?= $(ART_TEST_FULL)

	# Do you want run-tests with prebuilding?
	ART_TEST_RUN_TEST_PREBUILD ?= true

	# Do you want run-tests with no prebuilding enabled run?
	ART_TEST_RUN_TEST_NO_PREBUILD ?= $(ART_TEST_FULL)

	# Do you want run-tests without a pregenerated core.art?
	ART_TEST_RUN_TEST_NO_IMAGE ?= $(ART_TEST_FULL)

	# Do you want run-tests with relocation enabled but patchoat failing?
	ART_TEST_RUN_TEST_RELOCATE_NO_PATCHOAT ?= $(ART_TEST_FULL)

	# Do you want run-tests without a dex2oat?
	ART_TEST_RUN_TEST_NO_DEX2OAT ?= $(ART_TEST_FULL)

	# Do you want run-tests with libartd.so?
	ART_TEST_RUN_TEST_DEBUG ?= true

	# Do you want run-tests with libart.so?
	ART_TEST_RUN_TEST_NDEBUG ?= $(ART_TEST_FULL)

	# Do you want run-tests with the host/target's second arch?
	ART_TEST_RUN_TEST_2ND_ARCH ?= true

	# Do you want failed tests to have their artifacts cleaned up?
	ART_TEST_RUN_TEST_ALWAYS_CLEAN ?= true

	# Do you want run-tests with the --debuggable flag
	ART_TEST_RUN_TEST_DEBUGGABLE ?= $(ART_TEST_FULL)

	# Define the command run on test failure. $(1) is the name of the test. Executed by the shell.
	define ART_TEST_FAILED
	( [ -f $(ART_HOST_TEST_DIR)/skipped/$(1) ] \|\| \
	(mkdir -p $(ART_HOST_TEST_DIR)/failed/ && touch $(ART_HOST_TEST_DIR)/failed/$(1) && \
	echo $(ART_TEST_KNOWN_FAILING) \| grep -q $(1) \
	&& (echo -e "$(1) \e[91mKNOWN FAILURE\e[0m") \
	\|\| (echo -e "$(1) \e[91mFAILED\e[0m" >&2 )))
	endef

	# Define the command run on test success. $(1) is the name of the test. Executed by the shell.
	# The command checks prints "PASSED" then checks to see if this was a top-level make target (e.g.
	# "mm test-art-host-oat-HelloWorld32"), if it was then it does nothing, otherwise it creates a file
	# to be printed in the passing test summary.
	define ART_TEST_PASSED
	( echo -e "$(1) \e[92mPASSED\e[0m" && \
	(echo $(MAKECMDGOALS) \| grep -q $(1) \|\| \
	(mkdir -p $(ART_HOST_TEST_DIR)/passed/ && touch $(ART_HOST_TEST_DIR)/passed/$(1))))
	endef

	# Define the command run on test success of multiple prerequisites. $(1) is the name of the test.
	# When the test is a top-level make target then a summary of the ran tests is produced. Executed by
	# the shell.
	define ART_TEST_PREREQ_FINISHED
	(echo -e "$(1) \e[32mCOMPLETE\e[0m" && \
	(echo $(MAKECMDGOALS) \| grep -q -v $(1) \|\| \
	(([ -d $(ART_HOST_TEST_DIR)/passed/ ] \
	&& (echo -e "\e[92mPASSING TESTS\e[0m" && ls -1 $(ART_HOST_TEST_DIR)/passed/) \
	\|\| (echo -e "\e[91mNO TESTS PASSED\e[0m")) && \
	([ -d $(ART_HOST_TEST_DIR)/skipped/ ] \
	&& (echo -e "\e[93mSKIPPED TESTS\e[0m" && ls -1 $(ART_HOST_TEST_DIR)/skipped/) \
	\|\| (echo -e "\e[92mNO TESTS SKIPPED\e[0m")) && \
	([ -d $(ART_HOST_TEST_DIR)/failed/ ] \
	&& (echo -e "\e[91mFAILING TESTS\e[0m" >&2 && ls -1 $(ART_HOST_TEST_DIR)/failed/ >&2) \
	\|\| (echo -e "\e[92mNO TESTS FAILED\e[0m")) \
	&& ([ ! -d $(ART_HOST_TEST_DIR)/failed/ ] && rm -r $(ART_HOST_TEST_DIR) \
	\|\| (rm -r $(ART_HOST_TEST_DIR) && false)))))
	endef

	# Define the command executed by the shell ahead of running an art test. $(1) is the name of the
	# test.
	define ART_TEST_SKIP
	((echo $(ART_TEST_KNOWN_BROKEN) \| grep -q -v $(1) \
	&& ([ ! -d $(ART_HOST_TEST_DIR)/failed/ ] \|\| [ $(ART_TEST_KEEP_GOING) = true ])\
	&& echo -e "$(1) \e[95mRUNNING\e[0m") \
	\|\| ((mkdir -p $(ART_HOST_TEST_DIR)/skipped/ && touch $(ART_HOST_TEST_DIR)/skipped/$(1) \
	&& ([ -d $(ART_HOST_TEST_DIR)/failed/ ] \
	&& echo -e "$(1) \e[93mSKIPPING DUE TO EARLIER FAILURE\e[0m") \
	\|\| echo -e "$(1) \e[93mSKIPPING BROKEN TEST\e[0m") && false))
	endef

	# Create a build rule to create the dex file for a test.
	# $(1): module prefix, e.g. art-test-dex
	# $(2): input test directory in art/test, e.g. HelloWorld
	# $(3): target output module path (default module path is used on host)
	# $(4): additional dependencies
	# $(5): a make variable used to collate target dependencies, e.g ART_TEST_TARGET_OAT_HelloWorld_DEX
	# $(6): a make variable used to collate host dependencies, e.g ART_TEST_HOST_OAT_HelloWorld_DEX
	#
	# If the input test directory contains a file called main.list and main.jpp,
	# then a multi-dex file is created passing main.list as the --main-dex-list
	# argument to dx and main.jpp for Jack.
	define build-art-test-dex
	ifeq ($(ART_BUILD_TARGET),true)
	include $(CLEAR_VARS)
	LOCAL_MODULE := $(1)-$(2)
	LOCAL_SRC_FILES := $(call all-java-files-under, $(2))
	LOCAL_NO_STANDARD_LIBRARIES := true
	LOCAL_DEX_PREOPT := false
	LOCAL_ADDITIONAL_DEPENDENCIES := art/build/Android.common_test.mk $(4)
	LOCAL_MODULE_TAGS := tests
	LOCAL_JAVA_LIBRARIES := $(TARGET_CORE_JARS)
	LOCAL_MODULE_PATH := $(3)
	LOCAL_DEX_PREOPT_IMAGE_LOCATION := $(TARGET_CORE_IMG_OUT)
	ifneq ($(wildcard $(LOCAL_PATH)/$(2)/main.list),)
	LOCAL_DX_FLAGS := --multi-dex --main-dex-list=$(LOCAL_PATH)/$(2)/main.list --minimal-main-dex
	LOCAL_JACK_FLAGS := -D jack.dex.output.policy=minimal-multidex -D jack.preprocessor=true -D jack.preprocessor.file=$(LOCAL_PATH)/$(2)/main.jpp
	endif
	include $(BUILD_JAVA_LIBRARY)
	$(5) := $$(LOCAL_INSTALLED_MODULE)
	endif
	ifeq ($(ART_BUILD_HOST),true)
	include $(CLEAR_VARS)
	LOCAL_MODULE := $(1)-$(2)
	LOCAL_SRC_FILES := $(call all-java-files-under, $(2))
	LOCAL_NO_STANDARD_LIBRARIES := true
	LOCAL_DEX_PREOPT := false
	LOCAL_ADDITIONAL_DEPENDENCIES := art/build/Android.common_test.mk $(4)
	LOCAL_JAVA_LIBRARIES := $(HOST_CORE_JARS)
	LOCAL_DEX_PREOPT_IMAGE := $(HOST_CORE_IMG_LOCATION)
	ifneq ($(wildcard $(LOCAL_PATH)/$(2)/main.list),)
	LOCAL_DX_FLAGS := --multi-dex --main-dex-list=$(LOCAL_PATH)/$(2)/main.list --minimal-main-dex
	LOCAL_JACK_FLAGS := -D jack.dex.output.policy=minimal-multidex -D jack.preprocessor=true -D jack.preprocessor.file=$(LOCAL_PATH)/$(2)/main.jpp
	endif
	include $(BUILD_HOST_DALVIK_JAVA_LIBRARY)
	$(6) := $$(LOCAL_INSTALLED_MODULE)
	endif
	endef

	endif # ART_ANDROID_COMMON_TEST_MK