| #!/bin/bash |
| # |
| # Copyright (C) 2007 The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| # Set up prog to be the path of this script, including following symlinks, |
| # and set up progdir to be the fully-qualified pathname of its directory. |
| prog="$0" |
| while [ -h "${prog}" ]; do |
| newProg=`/bin/ls -ld "${prog}"` |
| newProg=`expr "${newProg}" : ".* -> \(.*\)$"` |
| if expr "x${newProg}" : 'x/' >/dev/null; then |
| prog="${newProg}" |
| else |
| progdir=`dirname "${prog}"` |
| prog="${progdir}/${newProg}" |
| fi |
| done |
| oldwd=`pwd` |
| progdir=`dirname "${prog}"` |
| cd "${progdir}" |
| progdir=`pwd` |
| prog="${progdir}"/`basename "${prog}"` |
| |
| export JAVA="java" |
| export JAVAC="javac -g -target 1.5" |
| export RUN="${progdir}/etc/push-and-run-test-jar" |
| |
| info="info.txt" |
| build="build" |
| run="run" |
| expected="expected.txt" |
| output="output.txt" |
| build_output="build-output.txt" |
| run_args="--quiet" |
| |
| dev_mode="no" |
| update_mode="no" |
| debug_mode="no" |
| usage="no" |
| |
| while true; do |
| if [ "x$1" = "x--host" ]; then |
| RUN="${progdir}/etc/host-run-test-jar" |
| shift |
| elif [ "x$1" = "x--jvm" ]; then |
| RUN="${progdir}/etc/reference-run-test-classes" |
| shift |
| elif [ "x$1" = "x-O" ]; then |
| run_args="${run_args} -O" |
| shift |
| elif [ "x$1" = "x--debug" ]; then |
| run_args="${run_args} --debug" |
| shift |
| elif [ "x$1" = "x--gdb" ]; then |
| run_args="${run_args} --gdb" |
| dev_mode="yes" |
| shift |
| elif [ "x$1" = "x--zygote" ]; then |
| run_args="${run_args} --zygote" |
| shift |
| elif [ "x$1" = "x--no-verify" ]; then |
| run_args="${run_args} --no-verify" |
| shift |
| elif [ "x$1" = "x--no-optimize" ]; then |
| run_args="${run_args} --no-optimize" |
| shift |
| elif [ "x$1" = "x--no-precise" ]; then |
| run_args="${run_args} --no-precise" |
| shift |
| elif [ "x$1" = "x--invoke-with" ]; then |
| shift |
| what="$1" |
| run_args="${run_args} --invoke-with \"${what}\"" |
| shift |
| elif [ "x$1" = "x--dev" ]; then |
| run_args="${run_args} --dev" |
| dev_mode="yes" |
| shift |
| elif [ "x$1" = "x--update" ]; then |
| update_mode="yes" |
| shift |
| elif [ "x$1" = "x--help" ]; then |
| usage="yes" |
| shift |
| elif expr "x$1" : "x--" >/dev/null 2>&1; then |
| echo "unknown $0 option: $1" 1>&2 |
| usage="yes" |
| break |
| else |
| break |
| fi |
| done |
| |
| if [ "$dev_mode" = "yes" -a "$update_mode" = "yes" ]; then |
| echo "--dev and --update are mutually exclusive" 1>&2 |
| usage="yes" |
| fi |
| |
| if [ "$usage" = "no" ]; then |
| if [ "x$1" = "x" -o "x$1" = "x-" ]; then |
| test_dir=`basename "$oldwd"` |
| else |
| test_dir="$1" |
| fi |
| |
| if [ '!' -d "$test_dir" ]; then |
| td2=`echo ${test_dir}-*` |
| if [ '!' -d "$td2" ]; then |
| echo "${test_dir}: no such test directory" 1>&2 |
| usage="yes" |
| fi |
| test_dir="$td2" |
| fi |
| |
| # Shift to get rid of the test name argument. The rest of the arguments |
| # will get passed to the test run. |
| shift |
| fi |
| |
| if [ "$usage" = "yes" ]; then |
| prog=`basename $prog` |
| ( |
| echo "usage:" |
| echo " $prog --help Print this message." |
| echo " $prog [options] [test-name] Run test normally." |
| echo " $prog --dev [options] [test-name] Development mode" \ |
| "(dumps to stdout)." |
| echo " $prog --update [options] [test-name] Update mode" \ |
| "(replaces expected.txt)." |
| echo ' Omitting the test name or specifying "-" will use the' \ |
| "current directory." |
| echo " Runtime Options:" |
| echo " -O Run oatexec rather than oatexecd (off by default)." |
| echo " --debug Wait for a debugger to attach." |
| #echo " --gdb Run under gdb; incompatible with some tests." |
| echo " --no-verify Turn off verification (on by default)." |
| echo " --no-optimize Turn off optimization (on by default)." |
| echo " --no-precise Turn off precise GC (on by default)." |
| echo " --zygote Spawn the process from the Zygote." \ |
| "If used, then the" |
| echo " other runtime options are ignored." |
| echo " --host Use the host-mode virtual machine." |
| echo " --valgrind Use valgrind when running locally." |
| echo " --jvm Use a host-local RI virtual machine." |
| ) 1>&2 |
| exit 1 |
| fi |
| |
| cd "$test_dir" |
| test_dir=`pwd` |
| |
| td_info="${test_dir}/${info}" |
| td_expected="${test_dir}/${expected}" |
| |
| tmp_dir="/tmp/test-$$" |
| |
| if [ '!' '(' -r "$td_info" -a -r "$td_expected" ')' ]; then |
| echo "${test_dir}: missing files" 1>&2 |
| exit 1 |
| fi |
| |
| # copy the test to a temp dir and run it |
| |
| echo "${test_dir}: building..." 1>&2 |
| |
| rm -rf "$tmp_dir" |
| cp -Rp "$test_dir" "$tmp_dir" |
| cd "$tmp_dir" |
| |
| if [ '!' -r "$build" ]; then |
| cp "${progdir}/etc/default-build" build |
| fi |
| |
| echo "${test_dir}: running..." 1>&2 |
| |
| if [ '!' -r "$run" ]; then |
| cp "${progdir}/etc/default-run" run |
| fi |
| |
| chmod 755 "$build" |
| chmod 755 "$run" |
| |
| export TEST_NAME=`basename ${test_dir}` |
| |
| good="no" |
| if [ "$dev_mode" = "yes" ]; then |
| "./${build}" 2>&1 |
| echo "build exit status: $?" 1>&2 |
| "./${run}" $run_args "$@" 2>&1 |
| echo "run exit status: $?" 1>&2 |
| good="yes" |
| elif [ "$update_mode" = "yes" ]; then |
| "./${build}" >"$build_output" 2>&1 |
| build_exit="$?" |
| if [ "$build_exit" = '0' ]; then |
| "./${run}" $run_args "$@" >"$output" 2>&1 |
| sed -e 's/[[:cntrl:]]$//g' < "$output" >"${td_expected}" |
| good="yes" |
| else |
| cat "$build_output" 1>&2 |
| echo "build exit status: $build_exit" 1>&2 |
| fi |
| else |
| "./${build}" >"$build_output" 2>&1 |
| build_exit="$?" |
| if [ "$build_exit" = '0' ]; then |
| "./${run}" $run_args "$@" >"$output" 2>&1 |
| else |
| cp "$build_output" "$output" |
| echo "build exit status: $build_exit" >>"$output" |
| fi |
| diff --strip-trailing-cr -q "$expected" "$output" >/dev/null |
| if [ "$?" = "0" ]; then |
| # output == expected |
| good="yes" |
| echo "${test_dir}: succeeded!" 1>&2 |
| fi |
| fi |
| |
| if [ "$good" = "yes" ]; then |
| cd "$oldwd" |
| rm -rf "$tmp_dir" |
| exit 0 |
| fi |
| |
| ( |
| if [ "$update_mode" '!=' "yes" ]; then |
| echo "${test_dir}: FAILED!" |
| echo ' ' |
| echo '#################### info' |
| cat "${td_info}" | sed 's/^/# /g' |
| echo '#################### diffs' |
| diff --strip-trailing-cr -u "$expected" "$output" |
| echo '####################' |
| echo ' ' |
| fi |
| echo "${TEST_NAME} files left in ${tmp_dir}" |
| ) 1>&2 |
| |
| exit 1 |