| # |
| # Copyright (C) 2011 The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| ifndef ANDROID_COMMON_MK |
| ANDROID_COMMON_MK = true |
| |
| ART_SUPPORTED_ARCH := arm arm64 mips x86 x86_64 |
| |
| ifeq (,$(filter $(TARGET_ARCH),$(ART_SUPPORTED_ARCH))) |
| $(warning unsupported TARGET_ARCH=$(TARGET_ARCH)) |
| endif |
| |
| # These can be overridden via the environment or by editing to |
| # enable/disable certain build configuration. |
| # |
| # For example, to disable everything but the host debug build you use: |
| # |
| # (export ART_BUILD_TARGET_NDEBUG=false && export ART_BUILD_TARGET_DEBUG=false && export ART_BUILD_HOST_NDEBUG=false && ...) |
| # |
| # Beware that tests may use the non-debug build for performance, notable 055-enum-performance |
| # |
| ART_BUILD_TARGET_NDEBUG ?= true |
| ART_BUILD_TARGET_DEBUG ?= true |
| ART_BUILD_HOST_NDEBUG ?= true |
| ART_BUILD_HOST_DEBUG ?= true |
| |
| ifeq ($(HOST_PREFER_32_BIT),true) |
| ART_HOST_ARCH := $(HOST_2ND_ARCH) |
| else |
| ART_HOST_ARCH := $(HOST_ARCH) |
| endif |
| |
| ifeq ($(ART_BUILD_TARGET_NDEBUG),false) |
| $(info Disabling ART_BUILD_TARGET_NDEBUG) |
| endif |
| ifeq ($(ART_BUILD_TARGET_DEBUG),false) |
| $(info Disabling ART_BUILD_TARGET_DEBUG) |
| endif |
| ifeq ($(ART_BUILD_HOST_NDEBUG),false) |
| $(info Disabling ART_BUILD_HOST_NDEBUG) |
| endif |
| ifeq ($(ART_BUILD_HOST_DEBUG),false) |
| $(info Disabling ART_BUILD_HOST_DEBUG) |
| endif |
| |
| # |
| # Used to enable smart mode |
| # |
| ART_SMALL_MODE := false |
| ifneq ($(wildcard art/SMALL_ART),) |
| $(info Enabling ART_SMALL_MODE because of existence of art/SMALL_ART) |
| ART_SMALL_MODE := true |
| endif |
| ifeq ($(WITH_ART_SMALL_MODE), true) |
| ART_SMALL_MODE := true |
| endif |
| |
| # |
| # Used to enable SEA mode |
| # |
| ART_SEA_IR_MODE := false |
| ifneq ($(wildcard art/SEA_IR_ART),) |
| $(info Enabling ART_SEA_IR_MODE because of existence of art/SEA_IR_ART) |
| ART_SEA_IR_MODE := true |
| endif |
| ifeq ($(WITH_ART_SEA_IR_MODE), true) |
| ART_SEA_IR_MODE := true |
| endif |
| |
| # |
| # Used to enable portable mode |
| # |
| ART_USE_PORTABLE_COMPILER := false |
| ifneq ($(wildcard art/USE_PORTABLE_COMPILER),) |
| $(info Enabling ART_USE_PORTABLE_COMPILER because of existence of art/USE_PORTABLE_COMPILER) |
| ART_USE_PORTABLE_COMPILER := true |
| endif |
| ifeq ($(WITH_ART_USE_PORTABLE_COMPILER),true) |
| $(info Enabling ART_USE_PORTABLE_COMPILER because WITH_ART_USE_PORTABLE_COMPILER=true) |
| ART_USE_PORTABLE_COMPILER := true |
| endif |
| |
| # |
| # Used to enable optimizing compiler |
| # |
| ART_USE_OPTIMIZING_COMPILER := false |
| ifneq ($(wildcard art/USE_OPTIMIZING_COMPILER),) |
| $(info Enabling ART_USE_OPTIMIZING_COMPILER because of existence of art/USE_OPTIMIZING_COMPILER) |
| ART_USE_OPTIMIZING_COMPILER := true |
| endif |
| ifeq ($(WITH_ART_USE_OPTIMIZING_COMPILER), true) |
| ART_USE_OPTIMIZING_COMPILER := true |
| endif |
| |
| ifeq ($(ART_USE_OPTIMIZING_COMPILER),true) |
| DEX2OAT_FLAGS := --compiler-backend=Optimizing |
| DALVIKVM_FLAGS += -Xcompiler-option --compiler-backend=Optimizing |
| endif |
| |
| # |
| # Used to change the default GC. Valid values are CMS, SS, GSS. The default is CMS. |
| # |
| ART_DEFAULT_GC_TYPE ?= CMS |
| ART_DEFAULT_GC_TYPE_CFLAGS := -DART_DEFAULT_GC_TYPE_IS_$(ART_DEFAULT_GC_TYPE) |
| |
| ifeq ($(ART_USE_PORTABLE_COMPILER),true) |
| LLVM_ROOT_PATH := external/llvm |
| # Don't fail a dalvik minimal host build. |
| -include $(LLVM_ROOT_PATH)/llvm.mk |
| endif |
| |
| # Clang build support. |
| |
| # Host. |
| ART_HOST_CLANG := false |
| ifneq ($(WITHOUT_HOST_CLANG),true) |
| # By default, host builds use clang for better warnings. |
| ART_HOST_CLANG := true |
| endif |
| |
| # Clang on the target: only enabled for ARM64. Target builds use GCC by default. |
| ART_TARGET_CLANG := |
| ART_TARGET_CLANG_arm := |
| ART_TARGET_CLANG_arm64 := true |
| ART_TARGET_CLANG_mips := |
| ART_TARGET_CLANG_x86 := |
| ART_TARGET_CLANG_x86_64 := |
| |
| define set-target-local-clang-vars |
| LOCAL_CLANG := $(ART_TARGET_CLANG) |
| $(foreach arch,$(ART_SUPPORTED_ARCH), |
| ifneq ($$(ART_TARGET_CLANG_$(arch)),) |
| LOCAL_CLANG_$(arch) := $$(ART_TARGET_CLANG_$(arch)) |
| endif) |
| endef |
| |
| # directory used for dalvik-cache on device |
| ART_DALVIK_CACHE_DIR := /data/dalvik-cache |
| |
| # directory used for gtests on device |
| ART_NATIVETEST_DIR := /data/nativetest/art |
| ART_NATIVETEST_OUT := $(TARGET_OUT_DATA_NATIVE_TESTS)/art |
| |
| # directory used for oat tests on device |
| ART_TEST_DIR := /data/art-test |
| ART_TEST_OUT := $(TARGET_OUT_DATA)/art-test |
| |
| # Primary vs. secondary |
| 2ND_TARGET_ARCH := $(TARGET_2ND_ARCH) |
| ART_PHONY_TEST_TARGET_SUFFIX := |
| 2ND_ART_PHONY_TEST_TARGET_SUFFIX := |
| ifdef TARGET_2ND_ARCH |
| art_test_primary_suffix := |
| art_test_secondary_suffix := |
| ifneq ($(filter %64,$(TARGET_ARCH)),) |
| art_test_primary_suffix := 64 |
| ART_PHONY_TEST_TARGET_SUFFIX := 64 |
| 2ND_ART_PHONY_TEST_TARGET_SUFFIX := 32 |
| ART_TARGET_ARCH_32 := $(TARGET_2ND_ARCH) |
| ART_TARGET_ARCH_64 := $(TARGET_ARCH) |
| else |
| # TODO: ??? |
| $(error Do not know what to do with this multi-target configuration!) |
| endif |
| else |
| ART_TARGET_ARCH_32 := $(TARGET_ARCH) |
| ART_TARGET_ARCH_64 := |
| endif |
| |
| ART_CPP_EXTENSION := .cc |
| |
| ART_HOST_SHLIB_EXTENSION := $(HOST_SHLIB_SUFFIX) |
| ART_HOST_SHLIB_EXTENSION ?= .so |
| |
| ART_C_INCLUDES := \ |
| external/gtest/include \ |
| external/valgrind/main/include \ |
| external/valgrind/main \ |
| external/vixl/src \ |
| external/zlib \ |
| frameworks/compile/mclinker/include |
| |
| art_cflags := \ |
| -fno-rtti \ |
| -std=gnu++11 \ |
| -ggdb3 \ |
| -Wall \ |
| -Werror \ |
| -Wextra \ |
| -Wno-sign-promo \ |
| -Wno-unused-parameter \ |
| -Wstrict-aliasing \ |
| -fstrict-aliasing |
| |
| ART_TARGET_CLANG_CFLAGS := |
| ART_TARGET_CLANG_CFLAGS_arm := |
| ART_TARGET_CLANG_CFLAGS_arm64 := |
| ART_TARGET_CLANG_CFLAGS_mips := |
| ART_TARGET_CLANG_CFLAGS_x86 := |
| ART_TARGET_CLANG_CFLAGS_x86_64 := |
| |
| # these are necessary for Clang ARM64 ART builds |
| ART_TARGET_CLANG_CFLAGS_arm64 += \ |
| -Wno-implicit-exception-spec-mismatch \ |
| -DNVALGRIND \ |
| -Wno-unused-value |
| |
| ifeq ($(ART_SMALL_MODE),true) |
| art_cflags += -DART_SMALL_MODE=1 |
| endif |
| |
| ifeq ($(ART_SEA_IR_MODE),true) |
| art_cflags += -DART_SEA_IR_MODE=1 |
| endif |
| |
| art_non_debug_cflags := \ |
| -O3 |
| |
| ifeq ($(HOST_OS),linux) |
| art_non_debug_cflags += \ |
| -Wframe-larger-than=1728 |
| endif |
| |
| # FIXME: upstream LLVM has a vectorizer bug that needs to be fixed |
| ART_TARGET_CLANG_CFLAGS_arm64 += \ |
| -fno-vectorize |
| |
| art_debug_cflags := \ |
| -O1 \ |
| -DDYNAMIC_ANNOTATIONS_ENABLED=1 \ |
| -UNDEBUG |
| |
| ART_HOST_CFLAGS := $(art_cflags) -DANDROID_SMP=1 -DART_BASE_ADDRESS=$(LIBART_IMG_HOST_BASE_ADDRESS) |
| ART_HOST_CFLAGS += -DART_DEFAULT_INSTRUCTION_SET_FEATURES=default |
| ART_HOST_CFLAGS += $(ART_DEFAULT_GC_TYPE_CFLAGS) |
| |
| ART_TARGET_CFLAGS := $(art_cflags) -DART_TARGET -DART_BASE_ADDRESS=$(LIBART_IMG_TARGET_BASE_ADDRESS) |
| ifeq ($(TARGET_CPU_SMP),true) |
| ART_TARGET_CFLAGS += -DANDROID_SMP=1 |
| else |
| ifeq ($(TARGET_CPU_SMP),false) |
| ART_TARGET_CFLAGS += -DANDROID_SMP=0 |
| else |
| $(warning TARGET_CPU_SMP should be (true|false), found $(TARGET_CPU_SMP)) |
| # Make sure we emit barriers for the worst case. |
| ART_TARGET_CFLAGS += -DANDROID_SMP=1 |
| endif |
| endif |
| ART_TARGET_CFLAGS += $(ART_DEFAULT_GC_TYPE_CFLAGS) |
| |
| # DEX2OAT_TARGET_INSTRUCTION_SET_FEATURES is set in ../build/core/dex_preopt.mk based on |
| # the TARGET_CPU_VARIANT |
| ifeq ($(DEX2OAT_TARGET_INSTRUCTION_SET_FEATURES),) |
| $(error Required DEX2OAT_TARGET_INSTRUCTION_SET_FEATURES is not set) |
| endif |
| ART_TARGET_CFLAGS += -DART_DEFAULT_INSTRUCTION_SET_FEATURES=$(DEX2OAT_TARGET_INSTRUCTION_SET_FEATURES) |
| |
| # Enable thread-safety for GCC 4.6, and clang, but not for GCC 4.7 or later where this feature was |
| # removed. Warn when -Wthread-safety is not used. |
| ifneq ($(filter 4.6 4.6.%, $(TARGET_GCC_VERSION)),) |
| ART_TARGET_CFLAGS += -Wthread-safety |
| else |
| # FIXME: add -Wthread-safety when the problem is fixed |
| ifeq ($(ART_TARGET_CLANG),true) |
| ART_TARGET_CFLAGS += |
| else |
| # Warn if -Wthread-safety is not suport and not doing a top-level or 'mma' build. |
| ifneq ($(ONE_SHOT_MAKEFILE),) |
| # Enable target GCC 4.6 with: export TARGET_GCC_VERSION_EXP=4.6 |
| $(info Using target GCC $(TARGET_GCC_VERSION) disables thread-safety checks.) |
| endif |
| endif |
| endif |
| # We compile with GCC 4.6 or clang on the host, both of which support -Wthread-safety. |
| ART_HOST_CFLAGS += -Wthread-safety |
| |
| # To use oprofile_android --callgraph, uncomment this and recompile with "mmm art -B -j16" |
| # ART_TARGET_CFLAGS += -fno-omit-frame-pointer -marm -mapcs |
| |
| # Addition CPU specific CFLAGS. |
| ifeq ($(TARGET_ARCH),arm) |
| ifneq ($(filter cortex-a15, $(TARGET_CPU_VARIANT)),) |
| # Fake a ARM feature for LPAE support. |
| ART_TARGET_CFLAGS += -D__ARM_FEATURE_LPAE=1 |
| endif |
| endif |
| |
| ART_HOST_NON_DEBUG_CFLAGS := $(art_non_debug_cflags) |
| ART_TARGET_NON_DEBUG_CFLAGS := $(art_non_debug_cflags) |
| |
| # TODO: move -fkeep-inline-functions to art_debug_cflags when target gcc > 4.4 (and -lsupc++) |
| ART_HOST_DEBUG_CFLAGS := $(art_debug_cflags) -fkeep-inline-functions |
| ART_HOST_DEBUG_LDLIBS := -lsupc++ |
| |
| ifneq ($(HOST_OS),linux) |
| # Some Mac OS pthread header files are broken with -fkeep-inline-functions. |
| ART_HOST_DEBUG_CFLAGS := $(filter-out -fkeep-inline-functions,$(ART_HOST_DEBUG_CFLAGS)) |
| # Mac OS doesn't have libsupc++. |
| ART_HOST_DEBUG_LDLIBS := $(filter-out -lsupc++,$(ART_HOST_DEBUG_LDLIBS)) |
| endif |
| |
| ART_TARGET_DEBUG_CFLAGS := $(art_debug_cflags) |
| |
| # $(1): ndebug_or_debug |
| define set-target-local-cflags-vars |
| LOCAL_CFLAGS += $(ART_TARGET_CFLAGS) |
| LOCAL_CFLAGS_x86 += $(ART_TARGET_CFLAGS_x86) |
| art_target_cflags_ndebug_or_debug := $(1) |
| ifeq ($$(art_target_cflags_ndebug_or_debug),debug) |
| LOCAL_CFLAGS += $(ART_TARGET_DEBUG_CFLAGS) |
| else |
| LOCAL_CFLAGS += $(ART_TARGET_NON_DEBUG_CFLAGS) |
| endif |
| |
| # TODO: Also set when ART_TARGET_CLANG_$(arch)!=false and ART_TARGET_CLANG==true |
| $(foreach arch,$(ART_SUPPORTED_ARCH), |
| ifeq ($$(ART_TARGET_CLANG_$(arch)),true) |
| LOCAL_CFLAGS_$(arch) += $$(ART_TARGET_CLANG_CFLAGS_$(arch)) |
| endif) |
| endef |
| |
| ART_BUILD_TARGET := false |
| ART_BUILD_HOST := false |
| ART_BUILD_NDEBUG := false |
| ART_BUILD_DEBUG := false |
| ifeq ($(ART_BUILD_TARGET_NDEBUG),true) |
| ART_BUILD_TARGET := true |
| ART_BUILD_NDEBUG := true |
| endif |
| ifeq ($(ART_BUILD_TARGET_DEBUG),true) |
| ART_BUILD_TARGET := true |
| ART_BUILD_DEBUG := true |
| endif |
| ifeq ($(ART_BUILD_HOST_NDEBUG),true) |
| ART_BUILD_HOST := true |
| ART_BUILD_NDEBUG := true |
| endif |
| ifeq ($(ART_BUILD_HOST_DEBUG),true) |
| ART_BUILD_HOST := true |
| ART_BUILD_DEBUG := true |
| endif |
| |
| # Helper function to call a function twice with a target suffix |
| # $(1): The generator function for the rules |
| # Has one argument, the suffix |
| define call-art-multi-target |
| $(call $(1),$(ART_PHONY_TEST_TARGET_SUFFIX)) |
| |
| ifdef TARGET_2ND_ARCH |
| $(call $(1),$(2ND_ART_PHONY_TEST_TARGET_SUFFIX)) |
| endif |
| endef |
| |
| # Helper function to combine two variables with suffixes together. |
| # $(1): The base name. |
| define combine-art-multi-target-var |
| ifdef TARGET_2ND_ARCH |
| ifneq ($(ART_PHONY_TEST_TARGET_SUFFIX),) |
| ifneq ($(2ND_ART_PHONY_TEST_TARGET_SUFFIX),) |
| $(1) := $($(1)$(ART_PHONY_TEST_TARGET_SUFFIX)) $($(1)$(2ND_ART_PHONY_TEST_TARGET_SUFFIX)) |
| endif |
| endif |
| endif |
| endef |
| |
| |
| # Helper function to define a variable twice with a target suffix. Assume the name generated is |
| # derived from $(2) so we can create a combined var. |
| # $(1): The generator function for the rules |
| # Has one argument, the suffix |
| define call-art-multi-target-var |
| $(call $(1),$(ART_PHONY_TEST_TARGET_SUFFIX)) |
| |
| ifdef TARGET_2ND_ARCH |
| $(call $(1),$(2ND_ART_PHONY_TEST_TARGET_SUFFIX)) |
| |
| # Link both together, if it makes sense |
| ifneq ($(ART_PHONY_TEST_TARGET_SUFFIX),) |
| ifneq ($(2ND_ART_PHONY_TEST_TARGET_SUFFIX),) |
| $(2) := $(2)$(ART_PHONY_TEST_TARGET_SUFFIX) $(2)$(2ND_ART_PHONY_TEST_TARGET_SUFFIX) |
| endif |
| endif |
| |
| endif |
| endef |
| |
| # Helper function to call a function twice with a target suffix. Assume it generates make rules |
| # with the given name, and link them. |
| # $(1): The generator function for the rules |
| # Has one argument, the suffix |
| # $(2): The base rule name, necessary for the link |
| # We assume we can link the names together easily... |
| define call-art-multi-target-rule |
| $(call $(1),$(ART_PHONY_TEST_TARGET_SUFFIX)) |
| |
| ifdef TARGET_2ND_ARCH |
| $(call $(1),$(2ND_ART_PHONY_TEST_TARGET_SUFFIX)) |
| |
| # Link both together, if it makes sense |
| ifneq ($(ART_PHONY_TEST_TARGET_SUFFIX),) |
| ifneq ($(2ND_ART_PHONY_TEST_TARGET_SUFFIX),) |
| .PHONY: $(2) |
| $(2): $(2)$(ART_PHONY_TEST_TARGET_SUFFIX) $(2)$(2ND_ART_PHONY_TEST_TARGET_SUFFIX) |
| endif |
| endif |
| endif |
| endef |
| |
| HOST_CORE_OAT := $(HOST_OUT_JAVA_LIBRARIES)/$(ART_HOST_ARCH)/core.oat |
| TARGET_CORE_OAT := $(ART_TEST_DIR)/$(DEX2OAT_TARGET_ARCH)/core.oat |
| ifdef TARGET_2ND_ARCH |
| 2ND_TARGET_CORE_OAT := $(2ND_ART_TEST_DIR)/$($(TARGET_2ND_ARCH_VAR_PREFIX)DEX2OAT_TARGET_ARCH)/core.oat |
| endif |
| |
| HOST_CORE_OAT_OUT := $(HOST_OUT_JAVA_LIBRARIES)/$(ART_HOST_ARCH)/core.oat |
| TARGET_CORE_OAT_OUT := $(ART_TEST_OUT)/$(DEX2OAT_TARGET_ARCH)/core.oat |
| ifdef TARGET_2ND_ARCH |
| 2ND_TARGET_CORE_OAT_OUT := $(ART_TEST_OUT)/$($(TARGET_2ND_ARCH_VAR_PREFIX)DEX2OAT_TARGET_ARCH)/core.oat |
| endif |
| |
| HOST_CORE_IMG_OUT := $(HOST_OUT_JAVA_LIBRARIES)/$(ART_HOST_ARCH)/core.art |
| TARGET_CORE_IMG_OUT := $(ART_TEST_OUT)/$(DEX2OAT_TARGET_ARCH)/core.art |
| ifdef TARGET_2ND_ARCH |
| 2ND_TARGET_CORE_IMG_OUT := $(ART_TEST_OUT)/$($(TARGET_2ND_ARCH_VAR_PREFIX)DEX2OAT_TARGET_ARCH)/core.art |
| endif |
| |
| HOST_CORE_IMG_LOCATION := $(HOST_OUT_JAVA_LIBRARIES)/core.art |
| TARGET_CORE_IMG_LOCATION := $(ART_TEST_OUT)/core.art |
| |
| endif # ANDROID_COMMON_MK |