blob: 2493565120d89bda3bff26e5c5823588f48f9244 [file] [log] [blame]
#
# Copyright (C) 2011 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
ifndef ANDROID_COMMON_TEST_MK
ANDROID_COMMON_TEST_MK = true
include art/build/Android.common_path.mk
# We need to set a define for the nativetest dir so that common_runtime_test will know the right
# path. (The problem is being a 32b test on 64b device, which is still located in nativetest64).
ART_TARGET_CFLAGS += -DART_TARGET_NATIVETEST_DIR=${ART_TARGET_NATIVETEST_DIR}
# List of known broken tests that we won't attempt to execute. The test name must be the full
# rule name such as test-art-host-oat-optimizing-HelloWorld64.
ART_TEST_KNOWN_BROKEN := \
test-art-target-run-test-gcstress-optimizing-prebuild-004-SignalTest32 \
test-art-target-run-test-gcstress-optimizing-norelocate-004-SignalTest32 \
test-art-target-run-test-gcstress-default-prebuild-004-SignalTest32 \
test-art-target-run-test-gcstress-default-norelocate-004-SignalTest32 \
test-art-target-run-test-gcstress-optimizing-relocate-004-SignalTest32 \
test-art-target-run-test-gcstress-default-relocate-004-SignalTest32 \
test-art-target-run-test-gcstress-optimizing-no-prebuild-004-SignalTest32 \
test-art-target-run-test-gcstress-default-no-prebuild-004-SignalTest32 \
test-art-host-run-test-gcstress-default-prebuild-114-ParallelGC32 \
test-art-host-run-test-gcstress-interpreter-prebuild-114-ParallelGC32 \
test-art-host-run-test-gcstress-optimizing-prebuild-114-ParallelGC32 \
test-art-host-run-test-gcstress-default-prebuild-114-ParallelGC64 \
test-art-host-run-test-gcstress-interpreter-prebuild-114-ParallelGC64 \
test-art-host-run-test-gcstress-optimizing-prebuild-114-ParallelGC64
# Failing valgrind tests.
# Note: *all* 64b tests involving the runtime do not work currently. b/15170219.
# List of known failing tests that when executed won't cause test execution to not finish.
# The test name must be the full rule name such as test-art-host-oat-optimizing-HelloWorld64.
ART_TEST_KNOWN_FAILING :=
# Keep going after encountering a test failure?
ART_TEST_KEEP_GOING ?= true
# Do you want all tests, even those that are time consuming?
ART_TEST_FULL ?= false
# Do you want default compiler tests run?
ART_TEST_DEFAULT_COMPILER ?= true
# Do you want interpreter tests run?
ART_TEST_INTERPRETER ?= $(ART_TEST_FULL)
# Do you want optimizing compiler tests run?
ART_TEST_OPTIMIZING ?= $(ART_TEST_FULL)
# Do we want to test a PIC-compiled core image?
ART_TEST_PIC_IMAGE ?= $(ART_TEST_FULL)
# Do we want to test PIC-compiled tests ("apps")?
ART_TEST_PIC_TEST ?= $(ART_TEST_FULL)
# Do you want tracing tests run?
ART_TEST_TRACE ?= $(ART_TEST_FULL)
# Do you want tests with GC verification enabled run?
ART_TEST_GC_VERIFY ?= $(ART_TEST_FULL)
# Do you want tests with the GC stress mode enabled run?
ART_TEST_GC_STRESS ?= $(ART_TEST_FULL)
# Do you want tests with the JNI forcecopy mode enabled run?
ART_TEST_JNI_FORCECOPY ?= $(ART_TEST_FULL)
# Do you want run-tests with relocation disabled run?
ART_TEST_RUN_TEST_NO_RELOCATE ?= $(ART_TEST_FULL)
# Do you want run-tests with prebuilding?
ART_TEST_RUN_TEST_PREBUILD ?= true
# Do you want run-tests with no prebuilding enabled run?
ART_TEST_RUN_TEST_NO_PREBUILD ?= $(ART_TEST_FULL)
# Do you want run-tests without a pregenerated core.art?
ART_TEST_RUN_TEST_NO_IMAGE ?= $(ART_TEST_FULL)
# Do you want run-tests with relocation enabled but patchoat failing?
ART_TEST_RUN_TEST_RELOCATE_NO_PATCHOAT ?= $(ART_TEST_FULL)
# Do you want run-tests without a dex2oat?
ART_TEST_RUN_TEST_NO_DEX2OAT ?= $(ART_TEST_FULL)
# Do you want run-tests with libartd.so?
ART_TEST_RUN_TEST_DEBUG ?= true
# Do you want run-tests with libart.so?
ART_TEST_RUN_TEST_NDEBUG ?= $(ART_TEST_FULL)
# Do you want run-tests with the host/target's second arch?
ART_TEST_RUN_TEST_2ND_ARCH ?= true
# Do you want failed tests to have their artifacts cleaned up?
ART_TEST_RUN_TEST_ALWAYS_CLEAN ?= true
# Define the command run on test failure. $(1) is the name of the test. Executed by the shell.
define ART_TEST_FAILED
( [ -f $(ART_HOST_TEST_DIR)/skipped/$(1) ] || \
(mkdir -p $(ART_HOST_TEST_DIR)/failed/ && touch $(ART_HOST_TEST_DIR)/failed/$(1) && \
echo $(ART_TEST_KNOWN_FAILING) | grep -q $(1) \
&& (echo -e "$(1) \e[91mKNOWN FAILURE\e[0m") \
|| (echo -e "$(1) \e[91mFAILED\e[0m" >&2 )))
endef
# Define the command run on test success. $(1) is the name of the test. Executed by the shell.
# The command checks prints "PASSED" then checks to see if this was a top-level make target (e.g.
# "mm test-art-host-oat-HelloWorld32"), if it was then it does nothing, otherwise it creates a file
# to be printed in the passing test summary.
define ART_TEST_PASSED
( echo -e "$(1) \e[92mPASSED\e[0m" && \
(echo $(MAKECMDGOALS) | grep -q $(1) || \
(mkdir -p $(ART_HOST_TEST_DIR)/passed/ && touch $(ART_HOST_TEST_DIR)/passed/$(1))))
endef
# Define the command run on test success of multiple prerequisites. $(1) is the name of the test.
# When the test is a top-level make target then a summary of the ran tests is produced. Executed by
# the shell.
define ART_TEST_PREREQ_FINISHED
(echo -e "$(1) \e[32mCOMPLETE\e[0m" && \
(echo $(MAKECMDGOALS) | grep -q -v $(1) || \
(([ -d $(ART_HOST_TEST_DIR)/passed/ ] \
&& (echo -e "\e[92mPASSING TESTS\e[0m" && ls -1 $(ART_HOST_TEST_DIR)/passed/) \
|| (echo -e "\e[91mNO TESTS PASSED\e[0m")) && \
([ -d $(ART_HOST_TEST_DIR)/skipped/ ] \
&& (echo -e "\e[93mSKIPPED TESTS\e[0m" && ls -1 $(ART_HOST_TEST_DIR)/skipped/) \
|| (echo -e "\e[92mNO TESTS SKIPPED\e[0m")) && \
([ -d $(ART_HOST_TEST_DIR)/failed/ ] \
&& (echo -e "\e[91mFAILING TESTS\e[0m" >&2 && ls -1 $(ART_HOST_TEST_DIR)/failed/ >&2) \
|| (echo -e "\e[92mNO TESTS FAILED\e[0m")) \
&& ([ ! -d $(ART_HOST_TEST_DIR)/failed/ ] && rm -r $(ART_HOST_TEST_DIR) \
|| (rm -r $(ART_HOST_TEST_DIR) && false)))))
endef
# Define the command executed by the shell ahead of running an art test. $(1) is the name of the
# test.
define ART_TEST_SKIP
((echo $(ART_TEST_KNOWN_BROKEN) | grep -q -v $(1) \
&& ([ ! -d $(ART_HOST_TEST_DIR)/failed/ ] || [ $(ART_TEST_KEEP_GOING) = true ])\
&& echo -e "$(1) \e[95mRUNNING\e[0m") \
|| ((mkdir -p $(ART_HOST_TEST_DIR)/skipped/ && touch $(ART_HOST_TEST_DIR)/skipped/$(1) \
&& ([ -d $(ART_HOST_TEST_DIR)/failed/ ] \
&& echo -e "$(1) \e[93mSKIPPING DUE TO EARLIER FAILURE\e[0m") \
|| echo -e "$(1) \e[93mSKIPPING BROKEN TEST\e[0m") && false))
endef
# Create a build rule to create the dex file for a test.
# $(1): module prefix, e.g. art-test-dex
# $(2): input test directory in art/test, e.g. HelloWorld
# $(3): target output module path (default module path is used on host)
# $(4): additional dependencies
# $(5): a make variable used to collate target dependencies, e.g ART_TEST_TARGET_OAT_HelloWorld_DEX
# $(6): a make variable used to collate host dependencies, e.g ART_TEST_HOST_OAT_HelloWorld_DEX
define build-art-test-dex
ifeq ($(ART_BUILD_TARGET),true)
include $(CLEAR_VARS)
LOCAL_MODULE := $(1)-$(2)
LOCAL_SRC_FILES := $(call all-java-files-under, $(2))
LOCAL_NO_STANDARD_LIBRARIES := true
LOCAL_DEX_PREOPT := false
LOCAL_ADDITIONAL_DEPENDENCIES := art/build/Android.common_test.mk $(4)
LOCAL_MODULE_TAGS := tests
LOCAL_JAVA_LIBRARIES := $(TARGET_CORE_JARS)
LOCAL_MODULE_PATH := $(3)
LOCAL_DEX_PREOPT_IMAGE_LOCATION := $(TARGET_CORE_IMG_OUT)
include $(BUILD_JAVA_LIBRARY)
$(5) := $$(LOCAL_INSTALLED_MODULE)
endif
ifeq ($(ART_BUILD_HOST),true)
include $(CLEAR_VARS)
LOCAL_MODULE := $(1)-$(2)
LOCAL_SRC_FILES := $(call all-java-files-under, $(2))
LOCAL_NO_STANDARD_LIBRARIES := true
LOCAL_DEX_PREOPT := false
LOCAL_ADDITIONAL_DEPENDENCIES := art/build/Android.common_test.mk $(4)
LOCAL_JAVA_LIBRARIES := $(HOST_CORE_JARS)
LOCAL_DEX_PREOPT_IMAGE := $(HOST_CORE_IMG_LOCATION)
include $(BUILD_HOST_DALVIK_JAVA_LIBRARY)
$(6) := $$(LOCAL_INSTALLED_MODULE)
endif
endef
endif # ANDROID_COMMON_TEST_MK