Merge "ART: Rewrite stub-test inline assembly"
diff --git a/runtime/arch/stub_test.cc b/runtime/arch/stub_test.cc
index 0d2457e..1d10e5d 100644
--- a/runtime/arch/stub_test.cc
+++ b/runtime/arch/stub_test.cc
@@ -71,351 +71,7 @@
// TODO: Set up a frame according to referrer's specs.
size_t Invoke3WithReferrer(size_t arg0, size_t arg1, size_t arg2, uintptr_t code, Thread* self,
ArtMethod* referrer) {
- // Push a transition back into managed code onto the linked list in thread.
- ManagedStack fragment;
- self->PushManagedStackFragment(&fragment);
-
- size_t result;
- size_t fpr_result = 0;
-#if defined(__i386__)
- // TODO: Set the thread?
- __asm__ __volatile__(
- "subl $12, %%esp\n\t" // Align stack.
- "pushl %[referrer]\n\t" // Store referrer.
- "call *%%edi\n\t" // Call the stub
- "addl $16, %%esp" // Pop referrer
- : "=a" (result)
- // Use the result from eax
- : "a"(arg0), "c"(arg1), "d"(arg2), "D"(code), [referrer]"r"(referrer)
- // This places code into edi, arg0 into eax, arg1 into ecx, and arg2 into edx
- : "memory"); // clobber.
- // TODO: Should we clobber the other registers? EBX gets clobbered by some of the stubs,
- // but compilation fails when declaring that.
-#elif defined(__arm__)
- __asm__ __volatile__(
- "push {r1-r12, lr}\n\t" // Save state, 13*4B = 52B
- ".cfi_adjust_cfa_offset 52\n\t"
- "push {r9}\n\t"
- ".cfi_adjust_cfa_offset 4\n\t"
- "mov r9, %[referrer]\n\n"
- "str r9, [sp, #-8]!\n\t" // Push referrer, +8B padding so 16B aligned
- ".cfi_adjust_cfa_offset 8\n\t"
- "ldr r9, [sp, #8]\n\t"
-
- // Push everything on the stack, so we don't rely on the order. What a mess. :-(
- "sub sp, sp, #20\n\t"
- "str %[arg0], [sp]\n\t"
- "str %[arg1], [sp, #4]\n\t"
- "str %[arg2], [sp, #8]\n\t"
- "str %[code], [sp, #12]\n\t"
- "str %[self], [sp, #16]\n\t"
- "ldr r0, [sp]\n\t"
- "ldr r1, [sp, #4]\n\t"
- "ldr r2, [sp, #8]\n\t"
- "ldr r3, [sp, #12]\n\t"
- "ldr r9, [sp, #16]\n\t"
- "add sp, sp, #20\n\t"
-
- "blx r3\n\t" // Call the stub
- "add sp, sp, #12\n\t" // Pop null and padding
- ".cfi_adjust_cfa_offset -12\n\t"
- "pop {r1-r12, lr}\n\t" // Restore state
- ".cfi_adjust_cfa_offset -52\n\t"
- "mov %[result], r0\n\t" // Save the result
- : [result] "=r" (result)
- // Use the result from r0
- : [arg0] "r"(arg0), [arg1] "r"(arg1), [arg2] "r"(arg2), [code] "r"(code), [self] "r"(self),
- [referrer] "r"(referrer)
- : "r0", "memory"); // clobber.
-#elif defined(__aarch64__)
- __asm__ __volatile__(
- // Spill x0-x7 which we say we don't clobber. May contain args.
- "sub sp, sp, #64\n\t"
- ".cfi_adjust_cfa_offset 64\n\t"
- "stp x0, x1, [sp]\n\t"
- "stp x2, x3, [sp, #16]\n\t"
- "stp x4, x5, [sp, #32]\n\t"
- "stp x6, x7, [sp, #48]\n\t"
-
- "sub sp, sp, #16\n\t" // Reserve stack space, 16B aligned
- ".cfi_adjust_cfa_offset 16\n\t"
- "str %[referrer], [sp]\n\t" // referrer
-
- // Push everything on the stack, so we don't rely on the order. What a mess. :-(
- "sub sp, sp, #48\n\t"
- ".cfi_adjust_cfa_offset 48\n\t"
- // All things are "r" constraints, so direct str/stp should work.
- "stp %[arg0], %[arg1], [sp]\n\t"
- "stp %[arg2], %[code], [sp, #16]\n\t"
- "str %[self], [sp, #32]\n\t"
-
- // Now we definitely have x0-x3 free, use it to garble d8 - d15
- "movk x0, #0xfad0\n\t"
- "movk x0, #0xebad, lsl #16\n\t"
- "movk x0, #0xfad0, lsl #32\n\t"
- "movk x0, #0xebad, lsl #48\n\t"
- "fmov d8, x0\n\t"
- "add x0, x0, 1\n\t"
- "fmov d9, x0\n\t"
- "add x0, x0, 1\n\t"
- "fmov d10, x0\n\t"
- "add x0, x0, 1\n\t"
- "fmov d11, x0\n\t"
- "add x0, x0, 1\n\t"
- "fmov d12, x0\n\t"
- "add x0, x0, 1\n\t"
- "fmov d13, x0\n\t"
- "add x0, x0, 1\n\t"
- "fmov d14, x0\n\t"
- "add x0, x0, 1\n\t"
- "fmov d15, x0\n\t"
-
- // Load call params into the right registers.
- "ldp x0, x1, [sp]\n\t"
- "ldp x2, x3, [sp, #16]\n\t"
- "ldr x19, [sp, #32]\n\t"
- "add sp, sp, #48\n\t"
- ".cfi_adjust_cfa_offset -48\n\t"
-
-
- "blr x3\n\t" // Call the stub
- "mov x8, x0\n\t" // Store result
- "add sp, sp, #16\n\t" // Drop the quick "frame"
- ".cfi_adjust_cfa_offset -16\n\t"
-
- // Test d8 - d15. We can use x1 and x2.
- "movk x1, #0xfad0\n\t"
- "movk x1, #0xebad, lsl #16\n\t"
- "movk x1, #0xfad0, lsl #32\n\t"
- "movk x1, #0xebad, lsl #48\n\t"
- "fmov x2, d8\n\t"
- "cmp x1, x2\n\t"
- "b.ne 1f\n\t"
- "add x1, x1, 1\n\t"
-
- "fmov x2, d9\n\t"
- "cmp x1, x2\n\t"
- "b.ne 1f\n\t"
- "add x1, x1, 1\n\t"
-
- "fmov x2, d10\n\t"
- "cmp x1, x2\n\t"
- "b.ne 1f\n\t"
- "add x1, x1, 1\n\t"
-
- "fmov x2, d11\n\t"
- "cmp x1, x2\n\t"
- "b.ne 1f\n\t"
- "add x1, x1, 1\n\t"
-
- "fmov x2, d12\n\t"
- "cmp x1, x2\n\t"
- "b.ne 1f\n\t"
- "add x1, x1, 1\n\t"
-
- "fmov x2, d13\n\t"
- "cmp x1, x2\n\t"
- "b.ne 1f\n\t"
- "add x1, x1, 1\n\t"
-
- "fmov x2, d14\n\t"
- "cmp x1, x2\n\t"
- "b.ne 1f\n\t"
- "add x1, x1, 1\n\t"
-
- "fmov x2, d15\n\t"
- "cmp x1, x2\n\t"
- "b.ne 1f\n\t"
-
- "mov x9, #0\n\t" // Use x9 as flag, in clobber list
-
- // Finish up.
- "2:\n\t"
- "ldp x0, x1, [sp]\n\t" // Restore stuff not named clobbered, may contain fpr_result
- "ldp x2, x3, [sp, #16]\n\t"
- "ldp x4, x5, [sp, #32]\n\t"
- "ldp x6, x7, [sp, #48]\n\t"
- "add sp, sp, #64\n\t" // Free stack space, now sp as on entry
- ".cfi_adjust_cfa_offset -64\n\t"
-
- "str x9, %[fpr_result]\n\t" // Store the FPR comparison result
- "mov %[result], x8\n\t" // Store the call result
-
- "b 3f\n\t" // Goto end
-
- // Failed fpr verification.
- "1:\n\t"
- "mov x9, #1\n\t"
- "b 2b\n\t" // Goto finish-up
-
- // End
- "3:\n\t"
- : [result] "=r" (result)
- // Use the result from r0
- : [arg0] "0"(arg0), [arg1] "r"(arg1), [arg2] "r"(arg2), [code] "r"(code), [self] "r"(self),
- [referrer] "r"(referrer), [fpr_result] "m" (fpr_result)
- : "x8", "x9", "x10", "x11", "x12", "x13", "x14", "x15", "x16", "x17", "x18", "x19", "x20",
- "x21", "x22", "x23", "x24", "x25", "x26", "x27", "x28", "x30",
- "d0", "d1", "d2", "d3", "d4", "d5", "d6", "d7",
- "d8", "d9", "d10", "d11", "d12", "d13", "d14", "d15",
- "d16", "d17", "d18", "d19", "d20", "d21", "d22", "d23",
- "d24", "d25", "d26", "d27", "d28", "d29", "d30", "d31",
- "memory"); // clobber.
-#elif defined(__mips__) && !defined(__LP64__)
- __asm__ __volatile__ (
- // Spill a0-a3 and t0-t7 which we say we don't clobber. May contain args.
- "addiu $sp, $sp, -64\n\t"
- "sw $a0, 0($sp)\n\t"
- "sw $a1, 4($sp)\n\t"
- "sw $a2, 8($sp)\n\t"
- "sw $a3, 12($sp)\n\t"
- "sw $t0, 16($sp)\n\t"
- "sw $t1, 20($sp)\n\t"
- "sw $t2, 24($sp)\n\t"
- "sw $t3, 28($sp)\n\t"
- "sw $t4, 32($sp)\n\t"
- "sw $t5, 36($sp)\n\t"
- "sw $t6, 40($sp)\n\t"
- "sw $t7, 44($sp)\n\t"
- // Spill gp register since it is caller save.
- "sw $gp, 52($sp)\n\t"
-
- "addiu $sp, $sp, -16\n\t" // Reserve stack space, 16B aligned.
- "sw %[referrer], 0($sp)\n\t"
-
- // Push everything on the stack, so we don't rely on the order.
- "addiu $sp, $sp, -20\n\t"
- "sw %[arg0], 0($sp)\n\t"
- "sw %[arg1], 4($sp)\n\t"
- "sw %[arg2], 8($sp)\n\t"
- "sw %[code], 12($sp)\n\t"
- "sw %[self], 16($sp)\n\t"
-
- // Load call params into the right registers.
- "lw $a0, 0($sp)\n\t"
- "lw $a1, 4($sp)\n\t"
- "lw $a2, 8($sp)\n\t"
- "lw $t9, 12($sp)\n\t"
- "lw $s1, 16($sp)\n\t"
- "addiu $sp, $sp, 20\n\t"
-
- "jalr $t9\n\t" // Call the stub.
- "nop\n\t"
- "addiu $sp, $sp, 16\n\t" // Drop the quick "frame".
-
- // Restore stuff not named clobbered.
- "lw $a0, 0($sp)\n\t"
- "lw $a1, 4($sp)\n\t"
- "lw $a2, 8($sp)\n\t"
- "lw $a3, 12($sp)\n\t"
- "lw $t0, 16($sp)\n\t"
- "lw $t1, 20($sp)\n\t"
- "lw $t2, 24($sp)\n\t"
- "lw $t3, 28($sp)\n\t"
- "lw $t4, 32($sp)\n\t"
- "lw $t5, 36($sp)\n\t"
- "lw $t6, 40($sp)\n\t"
- "lw $t7, 44($sp)\n\t"
- // Restore gp.
- "lw $gp, 52($sp)\n\t"
- "addiu $sp, $sp, 64\n\t" // Free stack space, now sp as on entry.
-
- "move %[result], $v0\n\t" // Store the call result.
- : [result] "=r" (result)
- : [arg0] "r"(arg0), [arg1] "r"(arg1), [arg2] "r"(arg2), [code] "r"(code), [self] "r"(self),
- [referrer] "r"(referrer)
- : "at", "v0", "v1", "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7", "t8", "t9", "k0", "k1",
- "fp", "ra",
- "$f0", "$f1", "$f2", "$f3", "$f4", "$f5", "$f6", "$f7", "$f8", "$f9", "$f10", "$f11",
- "$f12", "$f13", "$f14", "$f15", "$f16", "$f17", "$f18", "$f19", "$f20", "$f21", "$f22",
- "$f23", "$f24", "$f25", "$f26", "$f27", "$f28", "$f29", "$f30", "$f31",
- "memory"); // clobber.
-#elif defined(__mips__) && defined(__LP64__)
- __asm__ __volatile__ (
- // Spill a0-a7 which we say we don't clobber. May contain args.
- "daddiu $sp, $sp, -64\n\t"
- "sd $a0, 0($sp)\n\t"
- "sd $a1, 8($sp)\n\t"
- "sd $a2, 16($sp)\n\t"
- "sd $a3, 24($sp)\n\t"
- "sd $a4, 32($sp)\n\t"
- "sd $a5, 40($sp)\n\t"
- "sd $a6, 48($sp)\n\t"
- "sd $a7, 56($sp)\n\t"
-
- "daddiu $sp, $sp, -16\n\t" // Reserve stack space, 16B aligned.
- "sd %[referrer], 0($sp)\n\t"
-
- // Push everything on the stack, so we don't rely on the order.
- "daddiu $sp, $sp, -40\n\t"
- "sd %[arg0], 0($sp)\n\t"
- "sd %[arg1], 8($sp)\n\t"
- "sd %[arg2], 16($sp)\n\t"
- "sd %[code], 24($sp)\n\t"
- "sd %[self], 32($sp)\n\t"
-
- // Load call params into the right registers.
- "ld $a0, 0($sp)\n\t"
- "ld $a1, 8($sp)\n\t"
- "ld $a2, 16($sp)\n\t"
- "ld $t9, 24($sp)\n\t"
- "ld $s1, 32($sp)\n\t"
- "daddiu $sp, $sp, 40\n\t"
-
- "jalr $t9\n\t" // Call the stub.
- "nop\n\t"
- "daddiu $sp, $sp, 16\n\t" // Drop the quick "frame".
-
- // Restore stuff not named clobbered.
- "ld $a0, 0($sp)\n\t"
- "ld $a1, 8($sp)\n\t"
- "ld $a2, 16($sp)\n\t"
- "ld $a3, 24($sp)\n\t"
- "ld $a4, 32($sp)\n\t"
- "ld $a5, 40($sp)\n\t"
- "ld $a6, 48($sp)\n\t"
- "ld $a7, 56($sp)\n\t"
- "daddiu $sp, $sp, 64\n\t"
-
- "move %[result], $v0\n\t" // Store the call result.
- : [result] "=r" (result)
- : [arg0] "r"(arg0), [arg1] "r"(arg1), [arg2] "r"(arg2), [code] "r"(code), [self] "r"(self),
- [referrer] "r"(referrer)
- : "at", "v0", "v1", "t0", "t1", "t2", "t3", "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7",
- "t8", "t9", "k0", "k1", "fp", "ra",
- "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7", "f8", "f9", "f10", "f11", "f12", "f13",
- "f14", "f15", "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23", "f24", "f25", "f26",
- "f27", "f28", "f29", "f30", "f31",
- "memory"); // clobber.
-#elif defined(__x86_64__) && !defined(__APPLE__) && defined(__clang__)
- // Note: Uses the native convention
- // TODO: Set the thread?
- __asm__ __volatile__(
- "pushq %[referrer]\n\t" // Push referrer
- "pushq (%%rsp)\n\t" // & 16B alignment padding
- ".cfi_adjust_cfa_offset 16\n\t"
- "call *%%rax\n\t" // Call the stub
- "addq $16, %%rsp\n\t" // Pop null and padding
- ".cfi_adjust_cfa_offset -16\n\t"
- : "=a" (result)
- // Use the result from rax
- : "D"(arg0), "S"(arg1), "d"(arg2), "a"(code), [referrer] "c"(referrer)
- // This places arg0 into rdi, arg1 into rsi, arg2 into rdx, and code into rax
- : "rbx", "rbp", "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
- "memory"); // clobber all
- // TODO: Should we clobber the other registers?
-#else
- UNUSED(arg0, arg1, arg2, code, referrer);
- LOG(WARNING) << "Was asked to invoke for an architecture I do not understand.";
- result = 0;
-#endif
- // Pop transition.
- self->PopManagedStackFragment(fragment);
-
- fp_result = fpr_result;
- EXPECT_EQ(0U, fp_result);
-
- return result;
+ return Invoke3WithReferrerAndHidden(arg0, arg1, arg2, code, self, referrer, 0);
}
// TODO: Set up a frame according to referrer's specs.
@@ -429,19 +85,55 @@
size_t fpr_result = 0;
#if defined(__i386__)
// TODO: Set the thread?
+#define PUSH(reg) "push " # reg "\n\t .cfi_adjust_cfa_offset 4\n\t"
+#define POP(reg) "pop " # reg "\n\t .cfi_adjust_cfa_offset -4\n\t"
__asm__ __volatile__(
- "movd %[hidden], %%xmm7\n\t"
- "subl $12, %%esp\n\t" // Align stack.
- "pushl %[referrer]\n\t" // Store referrer
+ "movd %[hidden], %%xmm7\n\t" // This is a memory op, so do this early. If it is off of
+ // esp, then we won't be able to access it after spilling.
+
+ // Spill 6 registers.
+ PUSH(%%ebx)
+ PUSH(%%ecx)
+ PUSH(%%edx)
+ PUSH(%%esi)
+ PUSH(%%edi)
+ PUSH(%%ebp)
+
+ // Store the inputs to the stack, but keep the referrer up top, less work.
+ PUSH(%[referrer]) // Align stack.
+ PUSH(%[referrer]) // Store referrer
+
+ PUSH(%[arg0])
+ PUSH(%[arg1])
+ PUSH(%[arg2])
+ PUSH(%[code])
+ // Now read them back into the required registers.
+ POP(%%edi)
+ POP(%%edx)
+ POP(%%ecx)
+ POP(%%eax)
+ // Call is prepared now.
+
"call *%%edi\n\t" // Call the stub
- "addl $16, %%esp" // Pop referrer
+ "addl $8, %%esp\n\t" // Pop referrer and padding.
+ ".cfi_adjust_cfa_offset -8\n\t"
+
+ // Restore 6 registers.
+ POP(%%ebp)
+ POP(%%edi)
+ POP(%%esi)
+ POP(%%edx)
+ POP(%%ecx)
+ POP(%%ebx)
+
: "=a" (result)
// Use the result from eax
- : "a"(arg0), "c"(arg1), "d"(arg2), "D"(code), [referrer]"r"(referrer), [hidden]"m"(hidden)
+ : [arg0] "r"(arg0), [arg1] "r"(arg1), [arg2] "r"(arg2), [code] "r"(code),
+ [referrer]"r"(referrer), [hidden]"m"(hidden)
// This places code into edi, arg0 into eax, arg1 into ecx, and arg2 into edx
- : "memory"); // clobber.
- // TODO: Should we clobber the other registers? EBX gets clobbered by some of the stubs,
- // but compilation fails when declaring that.
+ : "memory", "xmm7"); // clobber.
+#undef PUSH
+#undef POP
#elif defined(__arm__)
__asm__ __volatile__(
"push {r1-r12, lr}\n\t" // Save state, 13*4B = 52B
@@ -743,23 +435,72 @@
"f14", "f15", "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23", "f24", "f25", "f26",
"f27", "f28", "f29", "f30", "f31",
"memory"); // clobber.
-#elif defined(__x86_64__) && !defined(__APPLE__) && defined(__clang__)
- // Note: Uses the native convention
+#elif defined(__x86_64__) && !defined(__APPLE__)
+#define PUSH(reg) "pushq " # reg "\n\t .cfi_adjust_cfa_offset 8\n\t"
+#define POP(reg) "popq " # reg "\n\t .cfi_adjust_cfa_offset -8\n\t"
+ // Note: Uses the native convention. We do a callee-save regimen by manually spilling and
+ // restoring almost all registers.
// TODO: Set the thread?
__asm__ __volatile__(
- "pushq %[referrer]\n\t" // Push referrer
- "pushq (%%rsp)\n\t" // & 16B alignment padding
- ".cfi_adjust_cfa_offset 16\n\t"
- "call *%%rbx\n\t" // Call the stub
- "addq $16, %%rsp\n\t" // Pop null and padding
+ // Spill almost everything (except rax, rsp). 14 registers.
+ PUSH(%%rbx)
+ PUSH(%%rcx)
+ PUSH(%%rdx)
+ PUSH(%%rsi)
+ PUSH(%%rdi)
+ PUSH(%%rbp)
+ PUSH(%%r8)
+ PUSH(%%r9)
+ PUSH(%%r10)
+ PUSH(%%r11)
+ PUSH(%%r12)
+ PUSH(%%r13)
+ PUSH(%%r14)
+ PUSH(%%r15)
+
+ PUSH(%[referrer]) // Push referrer & 16B alignment padding
+ PUSH(%[referrer])
+
+ // Now juggle the input registers.
+ PUSH(%[arg0])
+ PUSH(%[arg1])
+ PUSH(%[arg2])
+ PUSH(%[hidden])
+ PUSH(%[code])
+ POP(%%r8)
+ POP(%%rax)
+ POP(%%rdx)
+ POP(%%rsi)
+ POP(%%rdi)
+
+ "call *%%r8\n\t" // Call the stub
+ "addq $16, %%rsp\n\t" // Pop null and padding
".cfi_adjust_cfa_offset -16\n\t"
+
+ POP(%%r15)
+ POP(%%r14)
+ POP(%%r13)
+ POP(%%r12)
+ POP(%%r11)
+ POP(%%r10)
+ POP(%%r9)
+ POP(%%r8)
+ POP(%%rbp)
+ POP(%%rdi)
+ POP(%%rsi)
+ POP(%%rdx)
+ POP(%%rcx)
+ POP(%%rbx)
+
: "=a" (result)
// Use the result from rax
- : "D"(arg0), "S"(arg1), "d"(arg2), "b"(code), [referrer] "c"(referrer), [hidden] "a"(hidden)
- // This places arg0 into rdi, arg1 into rsi, arg2 into rdx, and code into rax
- : "rbp", "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
- "memory"); // clobber all
- // TODO: Should we clobber the other registers?
+ : [arg0] "r"(arg0), [arg1] "r"(arg1), [arg2] "r"(arg2), [code] "r"(code),
+ [referrer] "r"(referrer), [hidden] "r"(hidden)
+ // This places arg0 into rdi, arg1 into rsi, arg2 into rdx, and code into some other
+ // register. We can't use "b" (rbx), as ASAN uses this for the frame pointer.
+ : "memory"); // We spill and restore (almost) all registers, so only mention memory here.
+#undef PUSH
+#undef POP
#else
UNUSED(arg0, arg1, arg2, code, referrer, hidden);
LOG(WARNING) << "Was asked to invoke for an architecture I do not understand.";