test/etc/default-build

#!/bin/bash
#
# Copyright (C) 2008 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# Stop if something fails.
set -e

if [[ $# -le 0 ]]; then
  echo 'Error:' '$0 should have the parameters from the "build" script forwarded to it' >&2
  echo 'Error: An example of how do it correctly is ./default-build "$@"'
  exit 1
fi

# Set default values for directories.
if [ -d smali ]; then
  HAS_SMALI=true
else
  HAS_SMALI=false
fi

# .j files in jasmin get compiled into classes.jar
if [ -d jasmin ]; then
  HAS_JASMIN=true
else
  HAS_JASMIN=false
fi

if [ -d src ]; then
  HAS_SRC=true
else
  HAS_SRC=false
fi

# .java files in src-art get compiled with libcore on the bootclasspath
if [ -d src-art ]; then
  HAS_SRC_ART=true
else
  HAS_SRC_ART=false
fi

if [ -d src2 ]; then
  HAS_SRC2=true
else
  HAS_SRC2=false
fi

if [ -d src-multidex ]; then
  HAS_SRC_MULTIDEX=true
else
  HAS_SRC_MULTIDEX=false
fi

if [ -d smali-multidex ]; then
  HAS_SMALI_MULTIDEX=true
else
  HAS_SMALI_MULTIDEX=false
fi

# .j files in jasmin-multidex get compiled into classes2.jar
if [ -d jasmin-multidex ]; then
  HAS_JASMIN_MULTIDEX=true
else
  HAS_JASMIN_MULTIDEX=false
fi

if [ -d src-ex ]; then
  HAS_SRC_EX=true
else
  HAS_SRC_EX=false
fi

if [ -d src-dex2oat-unresolved ]; then
  HAS_SRC_DEX2OAT_UNRESOLVED=true
else
  HAS_SRC_DEX2OAT_UNRESOLVED=false
fi

if [ -f api-light-greylist.txt -o -f api-dark-greylist.txt -o -f api-blacklist.txt ]; then
  HAS_HIDDENAPI_SPEC=true
else
  HAS_HIDDENAPI_SPEC=false
fi

# USE_HIDDENAPI=false run-test... will disable hiddenapi.
if [ -z "${USE_HIDDENAPI}" ]; then
  USE_HIDDENAPI=true
fi

# DESUGAR=false run-test... will disable desugar.
if [[ "$DESUGAR" == false ]]; then
  USE_DESUGAR=false
fi

# Allow overriding ZIP_COMPRESSION_METHOD with e.g. 'store'
ZIP_COMPRESSION_METHOD="deflate"
# Align every ZIP file made by calling $ZIPALIGN command?
WITH_ZIP_ALIGN=false
ZIP_ALIGN_BYTES="-1"

DX_FLAGS="--min-sdk-version=24"
DX_VM_FLAGS=""
EXPERIMENTAL=""

BUILD_MODE="target"
DEV_MODE="no"

# The key for default arguments if no experimental things are enabled.
DEFAULT_EXPERIMENT="no-experiment"

# Setup experimental flag mappings in a bash associative array.
declare -A JACK_EXPERIMENTAL_ARGS
JACK_EXPERIMENTAL_ARGS["agents"]="-D jack.java.source.version=1.8 -D jack.android.min-api-level=24"
JACK_EXPERIMENTAL_ARGS["default-methods"]="-D jack.java.source.version=1.8 -D jack.android.min-api-level=24"
JACK_EXPERIMENTAL_ARGS["lambdas"]="-D jack.java.source.version=1.8 -D jack.android.min-api-level=24"
JACK_EXPERIMENTAL_ARGS["method-handles"]="-D jack.java.source.version=1.7 -D jack.android.min-api-level=o-b1"
JACK_EXPERIMENTAL_ARGS[${DEFAULT_EXPERIMENT}]="-D jack.java.source.version=1.8 -D jack.android.min-api-level=24"

declare -A SMALI_EXPERIMENTAL_ARGS
SMALI_EXPERIMENTAL_ARGS["default-methods"]="--api 24"
SMALI_EXPERIMENTAL_ARGS["method-handles"]="--api 26"
SMALI_EXPERIMENTAL_ARGS["var-handles"]="--api 26"
SMALI_EXPERIMENTAL_ARGS["agents"]="--api 26"

declare -A JAVAC_EXPERIMENTAL_ARGS
JAVAC_EXPERIMENTAL_ARGS["default-methods"]="-source 1.8 -target 1.8"
JAVAC_EXPERIMENTAL_ARGS["lambdas"]="-source 1.8 -target 1.8"
JAVAC_EXPERIMENTAL_ARGS["method-handles"]="-source 1.8 -target 1.8"
JAVAC_EXPERIMENTAL_ARGS["parameter-annotations"]="-source 1.8 -target 1.8"
JAVAC_EXPERIMENTAL_ARGS["var-handles"]="-source 1.8 -target 1.8"
JAVAC_EXPERIMENTAL_ARGS[${DEFAULT_EXPERIMENT}]="-source 1.8 -target 1.8"
JAVAC_EXPERIMENTAL_ARGS["agents"]="-source 1.8 -target 1.8"

declare -A DX_EXPERIMENTAL_ARGS
DX_EXPERIMENTAL_ARGS["method-handles"]="--min-sdk-version=26"
DX_EXPERIMENTAL_ARGS["parameter-annotations"]="--min-sdk-version=25"
DX_EXPERIMENTAL_ARGS["var-handles"]="--min-sdk-version=26"

while true; do
  if [ "x$1" = "x--dx-option" ]; then
    shift
    option="$1"
    DX_FLAGS="${DX_FLAGS} $option"
    shift
  elif [ "x$1" = "x--dx-vm-option" ]; then
    shift
    option="$1"
    DX_VM_FLAGS="${DX_VM_FLAGS} $option"
    shift
  elif [ "x$1" = "x--no-src" ]; then
    HAS_SRC=false
    shift
  elif [ "x$1" = "x--no-src2" ]; then
    HAS_SRC2=false
    shift
  elif [ "x$1" = "x--no-src-multidex" ]; then
    HAS_SRC_MULTIDEX=false
    shift
  elif [ "x$1" = "x--no-smali-multidex" ]; then
    HAS_SMALI_MULTIDEX=false
    shift
  elif [ "x$1" = "x--no-src-ex" ]; then
    HAS_SRC_EX=false
    shift
  elif [ "x$1" = "x--no-smali" ]; then
    HAS_SMALI=false
    shift
  elif [ "x$1" = "x--experimental" ]; then
    shift
    # We have a specific experimental configuration so don't use the default.
    DEFAULT_EXPERIMENT=""
    EXPERIMENTAL="${EXPERIMENTAL} $1"
    shift
  elif [ "x$1" = "x--zip-compression-method" ]; then
    # Allow using different zip compression method, e.g. 'store'
    shift
    ZIP_COMPRESSION_METHOD="$1"
    shift
  elif [ "x$1" = "x--zip-align" ]; then
    # Align ZIP entries to some # of bytes.
    shift
    WITH_ZIP_ALIGN=true
    ZIP_ALIGN_BYTES="$1"
    shift
  elif [ "x$1" = "x--host" ]; then
    BUILD_MODE="host"
    shift
  elif [ "x$1" = "x--target" ]; then
    BUILD_MODE="target"
    shift
  elif [ "x$1" = "x--jvm" ]; then
    BUILD_MODE="jvm"
    shift
  elif [ "x$1" = "x--dev" ]; then
    DEV_MODE="yes"
    shift
  elif expr "x$1" : "x--" >/dev/null 2>&1; then
    echo "unknown $0 option: $1" 1>&2
    exit 1
  else
    break
  fi
done

if [[ $BUILD_MODE == jvm ]]; then
  # Does not need desugar on jvm because it supports the latest functionality.
  USE_DESUGAR=false
  # Do not attempt to build src-art directories on jvm, it would fail without libcore.
  HAS_SRC_ART=false
fi

# Be sure to get any default arguments if not doing any experiments.
EXPERIMENTAL="${EXPERIMENTAL} ${DEFAULT_EXPERIMENT}"

if [ "${JACK_SERVER}" = "false" ]; then
  # Run in single-threaded mode for the continuous buildbot.
  JACK_ARGS="${JACK_ARGS} -D sched.runner=single-threaded"
else
  # Run with 4 threads to reduce memory footprint and thread contention.
  JACK_ARGS="${JACK_ARGS} -D sched.runner=multi-threaded"
  JACK_ARGS="${JACK_ARGS} -D sched.runner.thread.kind=fixed"
  JACK_ARGS="${JACK_ARGS} -D sched.runner.thread.fixed.count=4"
fi

# Add args from the experimental mappings.
for experiment in ${EXPERIMENTAL}; do
  JACK_ARGS="${JACK_ARGS} ${JACK_EXPERIMENTAL_ARGS[${experiment}]}"
  SMALI_ARGS="${SMALI_ARGS} ${SMALI_EXPERIMENTAL_ARGS[${experiment}]}"
  JAVAC_ARGS="${JAVAC_ARGS} ${JAVAC_EXPERIMENTAL_ARGS[${experiment}]}"
  DX_FLAGS="${DX_FLAGS} ${DX_EXPERIMENTAL_ARGS[${experiment}]}"
done

#########################################

# Catch all commands to 'ZIP' and prepend extra flags.
# Optionally, zipalign results to some alignment.
function zip() {
  local zip_target="$1"
  local entry_src="$2"
  shift 2

  command zip --compression-method "$ZIP_COMPRESSION_METHOD" "$zip_target" "$entry_src" "$@"

  if "$WITH_ZIP_ALIGN"; then
    # zipalign does not operate in-place, so write results to a temp file.
    local tmp_file="$(mktemp)"
    "$ZIPALIGN" -f "$ZIP_ALIGN_BYTES" "$zip_target" "$tmp_file"
    # replace original zip target with our temp file.
    mv "$tmp_file" "$zip_target"
  fi
}

function make_jasmin() {
  local out_directory="$1"
  shift
  local jasmin_sources=("$@")

  mkdir -p "$out_directory"

  if [[ $DEV_MODE == yes ]]; then
    echo ${JASMIN} -d "$out_directory" "${jasmin_sources[@]}"
    ${JASMIN} -d "$out_directory" "${jasmin_sources[@]}"
  else
    ${JASMIN} -d "$out_directory" "${jasmin_sources[@]}" >/dev/null
  fi
}

function desugar() {
  local desugar_args="--mode=$BUILD_MODE"

  if [[ $DEV_MODE == yes ]]; then
    desugar_args="$desugar_args --show-commands"
  fi

  "$DESUGAR" --core-only $desugar_args "$@"
}

# Like regular javac but may include libcore on the bootclasspath.
function javac_with_bootclasspath {
  local helper_args="--mode=$BUILD_MODE"

  if [[ $DEV_MODE == yes ]]; then
    helper_args="$helper_args --show-commands"
  fi

  # build with libcore for host and target, or openjdk for jvm
  "$ANDROID_BUILD_TOP/art/tools/javac-helper.sh" --core-only $helper_args ${JAVAC_ARGS} "$@"
}

# Make a "dex" file given a directory of classes in $1.
# Also calls desugar on the classes first to convert lambdas.
function make_dex() {
  local name="$1"

  local dx_input
  if [[ "$USE_DESUGAR" == "true" ]]; then
    # Make a jar first so desugar doesn't need every .class file individually.
    jar cf "$name.before-desugar.jar" -C "$name" .

    dx_input="${name}.desugar.jar"

    # Make desugared JAR.
    desugar --input "$name.before-desugar.jar" --output "$dx_input"
  else
    dx_input="${name}"
  fi

  local dexer="${DX}"
  if [ ${USE_D8} = "true" ]; then
    dexer="${ANDROID_HOST_OUT}/bin/d8-compat-dx"
  fi

  # Make dex file from desugared JAR.
  ${dexer} -JXmx256m ${DX_VM_FLAGS} --debug --dex --dump-to=${name}.lst --output=${name}.dex --dump-width=1000 ${DX_FLAGS} "${dx_input}"
}

# Merge all the dex files in $1..$N into $1. Skip non-existing files, but at least 1 file must exist.
function make_dexmerge() {
  # Dex file that acts as the destination.
  local dst_file="$1"

  # Dex files that act as the source.
  local dex_files_to_merge=()

  # Skip any non-existing files.
  while [[ $# -gt 0 ]]; do
    if [[ -e "$1" ]]; then
      dex_files_to_merge+=("$1")
    fi
    shift
  done

  # Should have at least 1 dex_files_to_merge here, otherwise dxmerger will print the help.
  ${DXMERGER} "$dst_file" "${dex_files_to_merge[@]}"
}

function make_hiddenapi() {
  local args=()
  while [[ $# -gt 0 ]]; do
    args+=("--dex=$1")
    shift
  done
  if [ -f api-light-greylist.txt ]; then
    args+=("--light-greylist=api-light-greylist.txt")
  fi
  if [ -f api-dark-greylist.txt ]; then
    args+=("--dark-greylist=api-dark-greylist.txt")
  fi
  if [ -f api-blacklist.txt ]; then
    args+=("--blacklist=api-blacklist.txt")
  fi
  ${HIDDENAPI} "${args[@]}"
}

# Print the directory name only if it exists.
function maybe_dir() {
  local dirname="$1"
  if [[ -d "$dirname" ]]; then
    echo "$dirname"
  fi
}

if [ -e classes.dex ]; then
  zip $TEST_NAME.jar classes.dex
  exit 0
fi

# Helper function for a common test. Evaluate with $(has_mutlidex).
function has_multidex() {
  echo [ ${HAS_SRC_MULTIDEX} = "true" \
         -o ${HAS_JASMIN_MULTIDEX} = "true" \
         -o ${HAS_SMALI_MULTIDEX} = "true" ]
}

if [ ${HAS_SRC_DEX2OAT_UNRESOLVED} = "true" ]; then
  mkdir -p classes
  mkdir classes-ex
  javac_with_bootclasspath -implicit:none -sourcepath src-dex2oat-unresolved -d classes `find src -name '*.java'`
  javac_with_bootclasspath -implicit:none -sourcepath src -d classes-ex `find src-dex2oat-unresolved -name '*.java'`
  if [ ${USE_JACK} = "true" ]; then
    jar cf classes.jill.jar -C classes .
    jar cf classes-ex.jill.jar -C classes-ex .

    ${JACK} --import classes-ex.jill.jar --output-dex .
    zip ${TEST_NAME}-ex.jar classes.dex
    ${JACK} --import classes.jill.jar --output-dex .
  else
    if [ ${NEED_DEX} = "true" ]; then
      make_dex classes-ex
      mv classes-ex.dex classes.dex   # rename it so it shows up as "classes.dex" in the zip file.
      zip ${TEST_NAME}-ex.jar classes.dex
      make_dex classes
    fi
  fi
else
  if [ ${USE_JACK} = "true" ]; then
    # Jack toolchain
    if [[ "$HAS_SRC" == true || "$HAS_SRC_ART" == true ]]; then
      if [ "${HAS_SRC_MULTIDEX}" = "true" ]; then
        # Compile src and src-multidex in the same .jack file. We will apply multidex partitioning
        # when creating the output .dex file.
        ${JACK} ${JACK_ARGS} --output-jack src.jack $(maybe_dir src) src-multidex $(maybe_dir src-art)
        jack_extra_args="${jack_extra_args} -D jack.dex.output.policy=minimal-multidex"
        jack_extra_args="${jack_extra_args} -D jack.preprocessor=true"
        jack_extra_args="${jack_extra_args} -D jack.preprocessor.file=multidex.jpp"
      else
        ${JACK} ${JACK_ARGS} --output-jack src.jack $(maybe_dir src) $(maybe_dir src-art)
      fi
      jack_extra_args="${jack_extra_args} --import src.jack"
    fi

    if [ "${HAS_SRC2}" = "true" ]; then
      ${JACK} ${JACK_ARGS} --output-jack src2.jack src2
      # In case of duplicate classes, we want to take into account the classes from src2. Therefore
      # we apply the 'keep-first' policy and import src2.jack file *before* the src.jack file.
      jack_extra_args="${jack_extra_args} -D jack.import.type.policy=keep-first"
      jack_extra_args="--import src2.jack ${jack_extra_args}"
    fi

    # Compile jack files into a DEX file.
    if [ "${HAS_SRC}" = "true" ] || [ "${HAS_SRC2}" = "true" ] || [ "${HAS_SRC_ART}" = "true" ]; then
      ${JACK} ${JACK_ARGS} ${jack_extra_args} --output-dex .
    fi
  else
    # Legacy toolchain with javac+dx
    if [ "${HAS_SRC}" = "true" ]; then
      mkdir -p classes
      javac_with_bootclasspath -implicit:none -classpath src-multidex -d classes `find src -name '*.java'`
    fi

    if [ "${HAS_SRC_ART}" = "true" ]; then
      mkdir -p classes
      javac_with_bootclasspath -implicit:none -classpath src-multidex -d classes `find src-art -name '*.java'`
    fi

    if [ "${HAS_SRC_MULTIDEX}" = "true" ]; then
      mkdir classes2
      javac_with_bootclasspath -implicit:none -classpath src -d classes2 `find src-multidex -name '*.java'`
      if [ ${NEED_DEX} = "true" ]; then
        make_dex classes2
      fi
    fi

    if [ "${HAS_SRC2}" = "true" ]; then
      mkdir -p classes
      javac_with_bootclasspath -classpath classes -d classes `find src2 -name '*.java'`
    fi

    if [[ "${HAS_SRC}" == "true" || "${HAS_SRC2}" == "true" || "${HAS_SRC_ART}" == "true" ]]; then
      if [ ${NEED_DEX} = "true" ]; then
        make_dex classes
      fi
    fi
  fi
fi

if [[ "${HAS_JASMIN}" == true ]]; then
  # Compile Jasmin classes as if they were part of the classes.dex file.
  make_jasmin jasmin_classes $(find 'jasmin' -name '*.j')
  if [[ "${NEED_DEX}" == "true" ]]; then
    # Disable desugar because it won't handle intentional linkage errors.
    USE_DESUGAR=false make_dex jasmin_classes
    make_dexmerge classes.dex jasmin_classes.dex
  else
    # Move jasmin classes into classes directory so that they are picked up with -cp classes.
    mkdir -p classes
    mv jasmin_classes/* classes
  fi
fi

if [ "${HAS_SMALI}" = "true" -a ${NEED_DEX} = "true" ]; then
  # Compile Smali classes
  ${SMALI} -JXmx512m assemble ${SMALI_ARGS} --output smali_classes.dex `find smali -name '*.smali'`

  # Merge smali files into classes.dex, this takes priority over any jasmin files.
  make_dexmerge classes.dex smali_classes.dex
fi

# Compile Jasmin classes in jasmin-multidex as if they were part of the classes2.jar
if [[ "$HAS_JASMIN_MULTIDEX" == true ]]; then
  make_jasmin jasmin_classes2 $(find 'jasmin-multidex' -name '*.j')

  if [[ "${NEED_DEX}" == "true" ]]; then
    # Disable desugar because it won't handle intentional linkage errors.
    USE_DESUGAR=false make_dex jasmin_classes2

    # Merge jasmin_classes2.dex into classes2.dex
    make_dexmerge classes2.dex jasmin_classes2.dex
  else
    # Move jasmin classes into classes2 directory so that they are picked up with -cp classes2.
    mkdir -p classes2
    mv jasmin_classes2/* classes2
  fi
fi

if [ "${HAS_SMALI_MULTIDEX}" = "true" -a ${NEED_DEX} = "true" ]; then
  # Compile Smali classes
  ${SMALI} -JXmx512m assemble ${SMALI_ARGS} --output smali_classes2.dex `find smali-multidex -name '*.smali'`

  # Merge smali_classes2.dex into classes2.dex
  make_dexmerge classes2.dex smali_classes2.dex
fi


if [ ${HAS_SRC_EX} = "true" ]; then
  if [ ${USE_JACK} = "true" ]; then
      # Rename previous "classes.dex" so it is not overwritten.
      mv classes.dex classes-1.dex
      #TODO find another way to append src.jack to the jack classpath
      ${JACK}:src.jack ${JACK_ARGS} --output-dex . src-ex
      zip $TEST_NAME-ex.jar classes.dex
      # Restore previous "classes.dex" so it can be zipped.
      mv classes-1.dex classes.dex
  else
    # Build src-ex into classes-ex.
    # Includes 'src', 'src-art' source when compiling classes-ex, but exclude their .class files.
    if [[ "${HAS_SRC}" == "true" ]]; then
      mkdir -p classes-tmp-for-ex
      javac_with_bootclasspath -d classes-tmp-for-ex `find src -name '*.java'`
      src_tmp_for_ex="-cp classes-tmp-for-ex"
    fi
    if [[ "${HAS_SRC_ART}" == "true" ]]; then
      mkdir -p classes-tmp-for-ex
      javac_with_bootclasspath -d classes-tmp-for-ex `find src-art -name '*.java'`
      src_tmp_for_ex="-cp classes-tmp-for-ex"
    fi
    mkdir classes-ex
    javac_with_bootclasspath -d classes-ex $src_tmp_for_ex `find src-ex -name '*.java'`
  fi
fi

if [[ -d classes-ex ]] && [ ${NEED_DEX} = "true" ]; then
  make_dex classes-ex

  # quick shuffle so that the stored name is "classes.dex"
  mv classes.dex classes-1.dex
  mv classes-ex.dex classes.dex
  zip $TEST_NAME-ex.jar classes.dex
  mv classes.dex classes-ex.dex
  mv classes-1.dex classes.dex
fi

# Apply hiddenapi on the dex files if the test has API list file(s).
if [ ${NEED_DEX} = "true" -a ${USE_HIDDENAPI} = "true" -a ${HAS_HIDDENAPI_SPEC} = "true" ]; then
  if $(has_multidex); then
    make_hiddenapi classes.dex classes2.dex
  else
    make_hiddenapi classes.dex
  fi
fi

# Create a single dex jar with two dex files for multidex.
if [ ${NEED_DEX} = "true" ]; then
  if $(has_multidex); then
    zip $TEST_NAME.jar classes.dex classes2.dex
  else
    zip $TEST_NAME.jar classes.dex
  fi
fi