| /* |
| * Copyright (C) 2009 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "updater/install.h" |
| |
| #include <ctype.h> |
| #include <errno.h> |
| #include <fcntl.h> |
| #include <ftw.h> |
| #include <inttypes.h> |
| #include <stdarg.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <sys/capability.h> |
| #include <sys/mount.h> |
| #include <sys/stat.h> |
| #include <sys/types.h> |
| #include <sys/wait.h> |
| #include <sys/xattr.h> |
| #include <time.h> |
| #include <unistd.h> |
| #include <utime.h> |
| |
| #include <memory> |
| #include <string> |
| #include <vector> |
| |
| #include <android-base/file.h> |
| #include <android-base/parsedouble.h> |
| #include <android-base/parseint.h> |
| #include <android-base/properties.h> |
| #include <android-base/stringprintf.h> |
| #include <android-base/strings.h> |
| #include <cutils/android_reboot.h> |
| #include <ext4_utils/make_ext4fs.h> |
| #include <ext4_utils/wipe.h> |
| #include <openssl/sha.h> |
| #include <selinux/label.h> |
| #include <selinux/selinux.h> |
| #include <ziparchive/zip_archive.h> |
| |
| #include "applypatch/applypatch.h" |
| #include "bootloader.h" |
| #include "edify/expr.h" |
| #include "error_code.h" |
| #include "mounts.h" |
| #include "ota_io.h" |
| #include "otautil/DirUtil.h" |
| #include "otautil/ZipUtil.h" |
| #include "print_sha1.h" |
| #include "tune2fs.h" |
| #include "updater/updater.h" |
| |
| // Send over the buffer to recovery though the command pipe. |
| static void uiPrint(State* state, const std::string& buffer) { |
| UpdaterInfo* ui = static_cast<UpdaterInfo*>(state->cookie); |
| |
| // "line1\nline2\n" will be split into 3 tokens: "line1", "line2" and "". |
| // So skip sending empty strings to UI. |
| std::vector<std::string> lines = android::base::Split(buffer, "\n"); |
| for (auto& line: lines) { |
| if (!line.empty()) { |
| fprintf(ui->cmd_pipe, "ui_print %s\n", line.c_str()); |
| fprintf(ui->cmd_pipe, "ui_print\n"); |
| } |
| } |
| |
| // On the updater side, we need to dump the contents to stderr (which has |
| // been redirected to the log file). Because the recovery will only print |
| // the contents to screen when processing pipe command ui_print. |
| fprintf(stderr, "%s", buffer.c_str()); |
| } |
| |
| void uiPrintf(State* _Nonnull state, const char* _Nonnull format, ...) { |
| std::string error_msg; |
| |
| va_list ap; |
| va_start(ap, format); |
| android::base::StringAppendV(&error_msg, format, ap); |
| va_end(ap); |
| |
| uiPrint(state, error_msg); |
| } |
| |
| static bool is_dir(const std::string& dirpath) { |
| struct stat st; |
| return stat(dirpath.c_str(), &st) == 0 && S_ISDIR(st.st_mode); |
| } |
| |
| // Create all parent directories of name, if necessary. |
| static bool make_parents(const std::string& name) { |
| size_t prev_end = 0; |
| while (prev_end < name.size()) { |
| size_t next_end = name.find('/', prev_end + 1); |
| if (next_end == std::string::npos) { |
| break; |
| } |
| std::string dir_path = name.substr(0, next_end); |
| if (!is_dir(dir_path)) { |
| int result = mkdir(dir_path.c_str(), 0700); |
| if (result != 0) { |
| printf("failed to mkdir %s when make parents for %s: %s\n", dir_path.c_str(), |
| name.c_str(), strerror(errno)); |
| return false; |
| } |
| |
| printf("created [%s]\n", dir_path.c_str()); |
| } |
| prev_end = next_end; |
| } |
| return true; |
| } |
| |
| // mount(fs_type, partition_type, location, mount_point) |
| // mount(fs_type, partition_type, location, mount_point, mount_options) |
| // |
| // fs_type="ext4" partition_type="EMMC" location=device |
| Value* MountFn(const char* name, State* state, int argc, Expr* argv[]) { |
| if (argc != 4 && argc != 5) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() expects 4-5 args, got %d", name, argc); |
| } |
| |
| std::vector<std::string> args; |
| if (!ReadArgs(state, argc, argv, &args)) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() Failed to parse the argument(s)", name); |
| } |
| const std::string& fs_type = args[0]; |
| const std::string& partition_type = args[1]; |
| const std::string& location = args[2]; |
| const std::string& mount_point = args[3]; |
| std::string mount_options; |
| |
| if (argc == 5) { |
| mount_options = args[4]; |
| } |
| |
| if (fs_type.empty()) { |
| return ErrorAbort(state, kArgsParsingFailure, "fs_type argument to %s() can't be empty", |
| name); |
| } |
| if (partition_type.empty()) { |
| return ErrorAbort(state, kArgsParsingFailure, "partition_type argument to %s() can't be empty", |
| name); |
| } |
| if (location.empty()) { |
| return ErrorAbort(state, kArgsParsingFailure, "location argument to %s() can't be empty", |
| name); |
| } |
| if (mount_point.empty()) { |
| return ErrorAbort(state, kArgsParsingFailure, "mount_point argument to %s() can't be empty", |
| name); |
| } |
| |
| { |
| char *secontext = NULL; |
| |
| if (sehandle) { |
| selabel_lookup(sehandle, &secontext, mount_point.c_str(), 0755); |
| setfscreatecon(secontext); |
| } |
| |
| mkdir(mount_point.c_str(), 0755); |
| |
| if (secontext) { |
| freecon(secontext); |
| setfscreatecon(NULL); |
| } |
| } |
| |
| if (mount(location.c_str(), mount_point.c_str(), fs_type.c_str(), |
| MS_NOATIME | MS_NODEV | MS_NODIRATIME, mount_options.c_str()) < 0) { |
| uiPrintf(state, "%s: failed to mount %s at %s: %s\n", |
| name, location.c_str(), mount_point.c_str(), strerror(errno)); |
| return StringValue(""); |
| } |
| |
| return StringValue(mount_point); |
| } |
| |
| |
| // is_mounted(mount_point) |
| Value* IsMountedFn(const char* name, State* state, int argc, Expr* argv[]) { |
| if (argc != 1) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() expects 1 arg, got %d", name, argc); |
| } |
| |
| std::vector<std::string> args; |
| if (!ReadArgs(state, argc, argv, &args)) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() Failed to parse the argument(s)", name); |
| } |
| const std::string& mount_point = args[0]; |
| if (mount_point.empty()) { |
| return ErrorAbort(state, kArgsParsingFailure, |
| "mount_point argument to unmount() can't be empty"); |
| } |
| |
| scan_mounted_volumes(); |
| MountedVolume* vol = find_mounted_volume_by_mount_point(mount_point.c_str()); |
| if (vol == nullptr) { |
| return StringValue(""); |
| } |
| |
| return StringValue(mount_point); |
| } |
| |
| |
| Value* UnmountFn(const char* name, State* state, int argc, Expr* argv[]) { |
| if (argc != 1) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() expects 1 arg, got %d", name, argc); |
| } |
| std::vector<std::string> args; |
| if (!ReadArgs(state, argc, argv, &args)) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() Failed to parse the argument(s)", name); |
| } |
| const std::string& mount_point = args[0]; |
| if (mount_point.empty()) { |
| return ErrorAbort(state, kArgsParsingFailure, |
| "mount_point argument to unmount() can't be empty"); |
| } |
| |
| scan_mounted_volumes(); |
| MountedVolume* vol = find_mounted_volume_by_mount_point(mount_point.c_str()); |
| if (vol == nullptr) { |
| uiPrintf(state, "unmount of %s failed; no such volume\n", mount_point.c_str()); |
| return nullptr; |
| } else { |
| int ret = unmount_mounted_volume(vol); |
| if (ret != 0) { |
| uiPrintf(state, "unmount of %s failed (%d): %s\n", |
| mount_point.c_str(), ret, strerror(errno)); |
| } |
| } |
| |
| return StringValue(mount_point); |
| } |
| |
| static int exec_cmd(const char* path, char* const argv[]) { |
| int status; |
| pid_t child; |
| if ((child = vfork()) == 0) { |
| execv(path, argv); |
| _exit(-1); |
| } |
| waitpid(child, &status, 0); |
| if (!WIFEXITED(status) || WEXITSTATUS(status) != 0) { |
| printf("%s failed with status %d\n", path, WEXITSTATUS(status)); |
| } |
| return WEXITSTATUS(status); |
| } |
| |
| // format(fs_type, partition_type, location, fs_size, mount_point) |
| // |
| // fs_type="ext4" partition_type="EMMC" location=device fs_size=<bytes> mount_point=<location> |
| // fs_type="f2fs" partition_type="EMMC" location=device fs_size=<bytes> mount_point=<location> |
| // if fs_size == 0, then make fs uses the entire partition. |
| // if fs_size > 0, that is the size to use |
| // if fs_size < 0, then reserve that many bytes at the end of the partition (not for "f2fs") |
| Value* FormatFn(const char* name, State* state, int argc, Expr* argv[]) { |
| if (argc != 5) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() expects 5 args, got %d", name, argc); |
| } |
| |
| std::vector<std::string> args; |
| if (!ReadArgs(state, argc, argv, &args)) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() Failed to parse the argument(s)", name); |
| } |
| const std::string& fs_type = args[0]; |
| const std::string& partition_type = args[1]; |
| const std::string& location = args[2]; |
| const std::string& fs_size = args[3]; |
| const std::string& mount_point = args[4]; |
| |
| if (fs_type.empty()) { |
| return ErrorAbort(state, kArgsParsingFailure, "fs_type argument to %s() can't be empty", |
| name); |
| } |
| if (partition_type.empty()) { |
| return ErrorAbort(state, kArgsParsingFailure, |
| "partition_type argument to %s() can't be empty", name); |
| } |
| if (location.empty()) { |
| return ErrorAbort(state, kArgsParsingFailure, "location argument to %s() can't be empty", |
| name); |
| } |
| if (mount_point.empty()) { |
| return ErrorAbort(state, kArgsParsingFailure, |
| "mount_point argument to %s() can't be empty", name); |
| } |
| |
| int64_t size; |
| if (!android::base::ParseInt(fs_size, &size)) { |
| return ErrorAbort(state, kArgsParsingFailure, |
| "%s: failed to parse int in %s\n", name, fs_size.c_str()); |
| } |
| |
| if (fs_type == "ext4") { |
| int status = make_ext4fs(location.c_str(), size, mount_point.c_str(), sehandle); |
| if (status != 0) { |
| printf("%s: make_ext4fs failed (%d) on %s", name, status, location.c_str()); |
| return StringValue(""); |
| } |
| return StringValue(location); |
| } else if (fs_type == "f2fs") { |
| if (size < 0) { |
| printf("%s: fs_size can't be negative for f2fs: %s", name, fs_size.c_str()); |
| return StringValue(""); |
| } |
| std::string num_sectors = std::to_string(size / 512); |
| |
| const char *f2fs_path = "/sbin/mkfs.f2fs"; |
| const char* const f2fs_argv[] = {"mkfs.f2fs", "-t", "-d1", location.c_str(), |
| num_sectors.c_str(), nullptr}; |
| int status = exec_cmd(f2fs_path, (char* const*)f2fs_argv); |
| if (status != 0) { |
| printf("%s: mkfs.f2fs failed (%d) on %s", name, status, location.c_str()); |
| return StringValue(""); |
| } |
| return StringValue(location); |
| } else { |
| printf("%s: unsupported fs_type \"%s\" partition_type \"%s\"", |
| name, fs_type.c_str(), partition_type.c_str()); |
| } |
| |
| return nullptr; |
| } |
| |
| // rename(src_name, dst_name) |
| // Renames src_name to dst_name. It automatically creates the necessary directories for dst_name. |
| // Example: rename("system/app/Hangouts/Hangouts.apk", "system/priv-app/Hangouts/Hangouts.apk") |
| Value* RenameFn(const char* name, State* state, int argc, Expr* argv[]) { |
| if (argc != 2) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() expects 2 args, got %d", name, argc); |
| } |
| |
| std::vector<std::string> args; |
| if (!ReadArgs(state, argc, argv, &args)) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() Failed to parse the argument(s)", name); |
| } |
| const std::string& src_name = args[0]; |
| const std::string& dst_name = args[1]; |
| |
| if (src_name.empty()) { |
| return ErrorAbort(state, kArgsParsingFailure, "src_name argument to %s() can't be empty", |
| name); |
| } |
| if (dst_name.empty()) { |
| return ErrorAbort(state, kArgsParsingFailure, "dst_name argument to %s() can't be empty", |
| name); |
| } |
| if (!make_parents(dst_name)) { |
| return ErrorAbort(state, kFileRenameFailure, "Creating parent of %s failed, error %s", |
| dst_name.c_str(), strerror(errno)); |
| } else if (access(dst_name.c_str(), F_OK) == 0 && access(src_name.c_str(), F_OK) != 0) { |
| // File was already moved |
| return StringValue(dst_name); |
| } else if (rename(src_name.c_str(), dst_name.c_str()) != 0) { |
| return ErrorAbort(state, kFileRenameFailure, "Rename of %s to %s failed, error %s", |
| src_name.c_str(), dst_name.c_str(), strerror(errno)); |
| } |
| |
| return StringValue(dst_name); |
| } |
| |
| // delete([filename, ...]) |
| // Deletes all the filenames listed. Returns the number of files successfully deleted. |
| // |
| // delete_recursive([dirname, ...]) |
| // Recursively deletes dirnames and all their contents. Returns the number of directories |
| // successfully deleted. |
| Value* DeleteFn(const char* name, State* state, int argc, Expr* argv[]) { |
| std::vector<std::string> paths(argc); |
| for (int i = 0; i < argc; ++i) { |
| if (!Evaluate(state, argv[i], &paths[i])) { |
| return nullptr; |
| } |
| } |
| |
| bool recursive = (strcmp(name, "delete_recursive") == 0); |
| |
| int success = 0; |
| for (int i = 0; i < argc; ++i) { |
| if ((recursive ? dirUnlinkHierarchy(paths[i].c_str()) : unlink(paths[i].c_str())) == 0) { |
| ++success; |
| } |
| } |
| |
| return StringValue(std::to_string(success)); |
| } |
| |
| |
| Value* ShowProgressFn(const char* name, State* state, int argc, Expr* argv[]) { |
| if (argc != 2) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() expects 2 args, got %d", name, argc); |
| } |
| |
| std::vector<std::string> args; |
| if (!ReadArgs(state, argc, argv, &args)) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() Failed to parse the argument(s)", name); |
| } |
| const std::string& frac_str = args[0]; |
| const std::string& sec_str = args[1]; |
| |
| double frac; |
| if (!android::base::ParseDouble(frac_str.c_str(), &frac)) { |
| return ErrorAbort(state, kArgsParsingFailure, |
| "%s: failed to parse double in %s\n", name, frac_str.c_str()); |
| } |
| int sec; |
| if (!android::base::ParseInt(sec_str.c_str(), &sec)) { |
| return ErrorAbort(state, kArgsParsingFailure, |
| "%s: failed to parse int in %s\n", name, sec_str.c_str()); |
| } |
| |
| UpdaterInfo* ui = (UpdaterInfo*)(state->cookie); |
| fprintf(ui->cmd_pipe, "progress %f %d\n", frac, sec); |
| |
| return StringValue(frac_str); |
| } |
| |
| Value* SetProgressFn(const char* name, State* state, int argc, Expr* argv[]) { |
| if (argc != 1) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() expects 1 arg, got %d", name, argc); |
| } |
| |
| std::vector<std::string> args; |
| if (!ReadArgs(state, 1, argv, &args)) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() Failed to parse the argument(s)", name); |
| } |
| const std::string& frac_str = args[0]; |
| |
| double frac; |
| if (!android::base::ParseDouble(frac_str.c_str(), &frac)) { |
| return ErrorAbort(state, kArgsParsingFailure, |
| "%s: failed to parse double in %s\n", name, frac_str.c_str()); |
| } |
| |
| UpdaterInfo* ui = (UpdaterInfo*)(state->cookie); |
| fprintf(ui->cmd_pipe, "set_progress %f\n", frac); |
| |
| return StringValue(frac_str); |
| } |
| |
| // package_extract_dir(package_path, destination_path) |
| Value* PackageExtractDirFn(const char* name, State* state, |
| int argc, Expr* argv[]) { |
| if (argc != 2) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() expects 2 args, got %d", name, argc); |
| } |
| |
| std::vector<std::string> args; |
| if (!ReadArgs(state, 2, argv, &args)) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() Failed to parse the argument(s)", name); |
| } |
| const std::string& zip_path = args[0]; |
| const std::string& dest_path = args[1]; |
| |
| ZipArchiveHandle za = ((UpdaterInfo*)(state->cookie))->package_zip; |
| |
| // To create a consistent system image, never use the clock for timestamps. |
| struct utimbuf timestamp = { 1217592000, 1217592000 }; // 8/1/2008 default |
| |
| bool success = ExtractPackageRecursive(za, zip_path, dest_path, ×tamp, sehandle); |
| |
| return StringValue(success ? "t" : ""); |
| } |
| |
| // package_extract_file(package_file[, dest_file]) |
| // Extracts a single package_file from the update package and writes it to dest_file, |
| // overwriting existing files if necessary. Without the dest_file argument, returns the |
| // contents of the package file as a binary blob. |
| Value* PackageExtractFileFn(const char* name, State* state, int argc, Expr* argv[]) { |
| if (argc < 1 || argc > 2) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() expects 1 or 2 args, got %d", name, argc); |
| } |
| |
| if (argc == 2) { |
| // The two-argument version extracts to a file. |
| |
| std::vector<std::string> args; |
| if (!ReadArgs(state, 2, argv, &args)) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() Failed to parse %d args", name, argc); |
| } |
| const std::string& zip_path = args[0]; |
| const std::string& dest_path = args[1]; |
| |
| ZipArchiveHandle za = static_cast<UpdaterInfo*>(state->cookie)->package_zip; |
| ZipString zip_string_path(zip_path.c_str()); |
| ZipEntry entry; |
| if (FindEntry(za, zip_string_path, &entry) != 0) { |
| printf("%s: no %s in package\n", name, zip_path.c_str()); |
| return StringValue(""); |
| } |
| |
| int fd = TEMP_FAILURE_RETRY( |
| ota_open(dest_path.c_str(), O_WRONLY | O_CREAT | O_TRUNC, S_IRUSR | S_IWUSR)); |
| if (fd == -1) { |
| printf("%s: can't open %s for write: %s\n", name, dest_path.c_str(), strerror(errno)); |
| return StringValue(""); |
| } |
| |
| bool success = true; |
| int32_t ret = ExtractEntryToFile(za, &entry, fd); |
| if (ret != 0) { |
| printf("%s: Failed to extract entry \"%s\" (%u bytes) to \"%s\": %s\n", name, |
| zip_path.c_str(), entry.uncompressed_length, dest_path.c_str(), ErrorCodeString(ret)); |
| success = false; |
| } |
| if (ota_fsync(fd) == -1) { |
| printf("fsync of \"%s\" failed: %s\n", dest_path.c_str(), strerror(errno)); |
| success = false; |
| } |
| if (ota_close(fd) == -1) { |
| printf("close of \"%s\" failed: %s\n", dest_path.c_str(), strerror(errno)); |
| success = false; |
| } |
| |
| return StringValue(success ? "t" : ""); |
| } else { |
| // The one-argument version returns the contents of the file as the result. |
| |
| std::vector<std::string> args; |
| if (!ReadArgs(state, 1, argv, &args)) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() Failed to parse %d args", name, argc); |
| } |
| const std::string& zip_path = args[0]; |
| |
| ZipArchiveHandle za = static_cast<UpdaterInfo*>(state->cookie)->package_zip; |
| ZipString zip_string_path(zip_path.c_str()); |
| ZipEntry entry; |
| if (FindEntry(za, zip_string_path, &entry) != 0) { |
| return ErrorAbort(state, kPackageExtractFileFailure, "%s(): no %s in package", name, |
| zip_path.c_str()); |
| } |
| |
| std::string buffer; |
| buffer.resize(entry.uncompressed_length); |
| |
| int32_t ret = ExtractToMemory(za, &entry, reinterpret_cast<uint8_t*>(&buffer[0]), buffer.size()); |
| if (ret != 0) { |
| return ErrorAbort(state, kPackageExtractFileFailure, |
| "%s: Failed to extract entry \"%s\" (%zu bytes) to memory: %s", name, |
| zip_path.c_str(), buffer.size(), ErrorCodeString(ret)); |
| } |
| |
| return new Value(VAL_BLOB, buffer); |
| } |
| } |
| |
| // symlink(target, [src1, src2, ...]) |
| // Creates all sources as symlinks to target. It unlinks any previously existing src1, src2, etc |
| // before creating symlinks. |
| Value* SymlinkFn(const char* name, State* state, int argc, Expr* argv[]) { |
| if (argc == 0) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() expects 1+ args, got %d", name, argc); |
| } |
| std::string target; |
| if (!Evaluate(state, argv[0], &target)) { |
| return nullptr; |
| } |
| |
| std::vector<std::string> srcs; |
| if (!ReadArgs(state, argc-1, argv+1, &srcs)) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s(): Failed to parse the argument(s)", |
| name); |
| } |
| |
| size_t bad = 0; |
| for (const auto& src : srcs) { |
| if (unlink(src.c_str()) == -1 && errno != ENOENT) { |
| printf("%s: failed to remove %s: %s\n", name, src.c_str(), strerror(errno)); |
| ++bad; |
| } else if (!make_parents(src)) { |
| printf("%s: failed to symlink %s to %s: making parents failed\n", |
| name, src.c_str(), target.c_str()); |
| ++bad; |
| } else if (symlink(target.c_str(), src.c_str()) == -1) { |
| printf("%s: failed to symlink %s to %s: %s\n", |
| name, src.c_str(), target.c_str(), strerror(errno)); |
| ++bad; |
| } |
| } |
| if (bad != 0) { |
| return ErrorAbort(state, kSymlinkFailure, "%s: Failed to create %zu symlink(s)", name, bad); |
| } |
| return StringValue("t"); |
| } |
| |
| struct perm_parsed_args { |
| bool has_uid; |
| uid_t uid; |
| bool has_gid; |
| gid_t gid; |
| bool has_mode; |
| mode_t mode; |
| bool has_fmode; |
| mode_t fmode; |
| bool has_dmode; |
| mode_t dmode; |
| bool has_selabel; |
| const char* selabel; |
| bool has_capabilities; |
| uint64_t capabilities; |
| }; |
| |
| static struct perm_parsed_args ParsePermArgs(State * state, int argc, |
| const std::vector<std::string>& args) { |
| int i; |
| struct perm_parsed_args parsed; |
| int bad = 0; |
| static int max_warnings = 20; |
| |
| memset(&parsed, 0, sizeof(parsed)); |
| |
| for (i = 1; i < argc; i += 2) { |
| if (args[i] == "uid") { |
| int64_t uid; |
| if (sscanf(args[i+1].c_str(), "%" SCNd64, &uid) == 1) { |
| parsed.uid = uid; |
| parsed.has_uid = true; |
| } else { |
| uiPrintf(state, "ParsePermArgs: invalid UID \"%s\"\n", args[i + 1].c_str()); |
| bad++; |
| } |
| continue; |
| } |
| if (args[i] == "gid") { |
| int64_t gid; |
| if (sscanf(args[i+1].c_str(), "%" SCNd64, &gid) == 1) { |
| parsed.gid = gid; |
| parsed.has_gid = true; |
| } else { |
| uiPrintf(state, "ParsePermArgs: invalid GID \"%s\"\n", args[i + 1].c_str()); |
| bad++; |
| } |
| continue; |
| } |
| if (args[i] == "mode") { |
| int32_t mode; |
| if (sscanf(args[i+1].c_str(), "%" SCNi32, &mode) == 1) { |
| parsed.mode = mode; |
| parsed.has_mode = true; |
| } else { |
| uiPrintf(state, "ParsePermArgs: invalid mode \"%s\"\n", args[i + 1].c_str()); |
| bad++; |
| } |
| continue; |
| } |
| if (args[i] == "dmode") { |
| int32_t mode; |
| if (sscanf(args[i+1].c_str(), "%" SCNi32, &mode) == 1) { |
| parsed.dmode = mode; |
| parsed.has_dmode = true; |
| } else { |
| uiPrintf(state, "ParsePermArgs: invalid dmode \"%s\"\n", args[i + 1].c_str()); |
| bad++; |
| } |
| continue; |
| } |
| if (args[i] == "fmode") { |
| int32_t mode; |
| if (sscanf(args[i+1].c_str(), "%" SCNi32, &mode) == 1) { |
| parsed.fmode = mode; |
| parsed.has_fmode = true; |
| } else { |
| uiPrintf(state, "ParsePermArgs: invalid fmode \"%s\"\n", args[i + 1].c_str()); |
| bad++; |
| } |
| continue; |
| } |
| if (args[i] == "capabilities") { |
| int64_t capabilities; |
| if (sscanf(args[i+1].c_str(), "%" SCNi64, &capabilities) == 1) { |
| parsed.capabilities = capabilities; |
| parsed.has_capabilities = true; |
| } else { |
| uiPrintf(state, "ParsePermArgs: invalid capabilities \"%s\"\n", args[i + 1].c_str()); |
| bad++; |
| } |
| continue; |
| } |
| if (args[i] == "selabel") { |
| if (!args[i+1].empty()) { |
| parsed.selabel = args[i+1].c_str(); |
| parsed.has_selabel = true; |
| } else { |
| uiPrintf(state, "ParsePermArgs: invalid selabel \"%s\"\n", args[i + 1].c_str()); |
| bad++; |
| } |
| continue; |
| } |
| if (max_warnings != 0) { |
| printf("ParsedPermArgs: unknown key \"%s\", ignoring\n", args[i].c_str()); |
| max_warnings--; |
| if (max_warnings == 0) { |
| printf("ParsedPermArgs: suppressing further warnings\n"); |
| } |
| } |
| } |
| return parsed; |
| } |
| |
| static int ApplyParsedPerms( |
| State * state, |
| const char* filename, |
| const struct stat *statptr, |
| struct perm_parsed_args parsed) |
| { |
| int bad = 0; |
| |
| if (parsed.has_selabel) { |
| if (lsetfilecon(filename, parsed.selabel) != 0) { |
| uiPrintf(state, "ApplyParsedPerms: lsetfilecon of %s to %s failed: %s\n", |
| filename, parsed.selabel, strerror(errno)); |
| bad++; |
| } |
| } |
| |
| /* ignore symlinks */ |
| if (S_ISLNK(statptr->st_mode)) { |
| return bad; |
| } |
| |
| if (parsed.has_uid) { |
| if (chown(filename, parsed.uid, -1) < 0) { |
| uiPrintf(state, "ApplyParsedPerms: chown of %s to %d failed: %s\n", |
| filename, parsed.uid, strerror(errno)); |
| bad++; |
| } |
| } |
| |
| if (parsed.has_gid) { |
| if (chown(filename, -1, parsed.gid) < 0) { |
| uiPrintf(state, "ApplyParsedPerms: chgrp of %s to %d failed: %s\n", |
| filename, parsed.gid, strerror(errno)); |
| bad++; |
| } |
| } |
| |
| if (parsed.has_mode) { |
| if (chmod(filename, parsed.mode) < 0) { |
| uiPrintf(state, "ApplyParsedPerms: chmod of %s to %d failed: %s\n", |
| filename, parsed.mode, strerror(errno)); |
| bad++; |
| } |
| } |
| |
| if (parsed.has_dmode && S_ISDIR(statptr->st_mode)) { |
| if (chmod(filename, parsed.dmode) < 0) { |
| uiPrintf(state, "ApplyParsedPerms: chmod of %s to %d failed: %s\n", |
| filename, parsed.dmode, strerror(errno)); |
| bad++; |
| } |
| } |
| |
| if (parsed.has_fmode && S_ISREG(statptr->st_mode)) { |
| if (chmod(filename, parsed.fmode) < 0) { |
| uiPrintf(state, "ApplyParsedPerms: chmod of %s to %d failed: %s\n", |
| filename, parsed.fmode, strerror(errno)); |
| bad++; |
| } |
| } |
| |
| if (parsed.has_capabilities && S_ISREG(statptr->st_mode)) { |
| if (parsed.capabilities == 0) { |
| if ((removexattr(filename, XATTR_NAME_CAPS) == -1) && (errno != ENODATA)) { |
| // Report failure unless it's ENODATA (attribute not set) |
| uiPrintf(state, "ApplyParsedPerms: removexattr of %s to %" PRIx64 " failed: %s\n", |
| filename, parsed.capabilities, strerror(errno)); |
| bad++; |
| } |
| } else { |
| struct vfs_cap_data cap_data; |
| memset(&cap_data, 0, sizeof(cap_data)); |
| cap_data.magic_etc = VFS_CAP_REVISION | VFS_CAP_FLAGS_EFFECTIVE; |
| cap_data.data[0].permitted = (uint32_t) (parsed.capabilities & 0xffffffff); |
| cap_data.data[0].inheritable = 0; |
| cap_data.data[1].permitted = (uint32_t) (parsed.capabilities >> 32); |
| cap_data.data[1].inheritable = 0; |
| if (setxattr(filename, XATTR_NAME_CAPS, &cap_data, sizeof(cap_data), 0) < 0) { |
| uiPrintf(state, "ApplyParsedPerms: setcap of %s to %" PRIx64 " failed: %s\n", |
| filename, parsed.capabilities, strerror(errno)); |
| bad++; |
| } |
| } |
| } |
| |
| return bad; |
| } |
| |
| // nftw doesn't allow us to pass along context, so we need to use |
| // global variables. *sigh* |
| static struct perm_parsed_args recursive_parsed_args; |
| static State* recursive_state; |
| |
| static int do_SetMetadataRecursive(const char* filename, const struct stat *statptr, |
| int fileflags, struct FTW *pfwt) { |
| return ApplyParsedPerms(recursive_state, filename, statptr, recursive_parsed_args); |
| } |
| |
| static Value* SetMetadataFn(const char* name, State* state, int argc, Expr* argv[]) { |
| if ((argc % 2) != 1) { |
| return ErrorAbort(state, kArgsParsingFailure, |
| "%s() expects an odd number of arguments, got %d", name, argc); |
| } |
| |
| std::vector<std::string> args; |
| if (!ReadArgs(state, argc, argv, &args)) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() Failed to parse the argument(s)", name); |
| } |
| |
| struct stat sb; |
| if (lstat(args[0].c_str(), &sb) == -1) { |
| return ErrorAbort(state, kSetMetadataFailure, "%s: Error on lstat of \"%s\": %s", |
| name, args[0].c_str(), strerror(errno)); |
| } |
| |
| struct perm_parsed_args parsed = ParsePermArgs(state, argc, args); |
| int bad = 0; |
| bool recursive = (strcmp(name, "set_metadata_recursive") == 0); |
| |
| if (recursive) { |
| recursive_parsed_args = parsed; |
| recursive_state = state; |
| bad += nftw(args[0].c_str(), do_SetMetadataRecursive, 30, FTW_CHDIR | FTW_DEPTH | FTW_PHYS); |
| memset(&recursive_parsed_args, 0, sizeof(recursive_parsed_args)); |
| recursive_state = NULL; |
| } else { |
| bad += ApplyParsedPerms(state, args[0].c_str(), &sb, parsed); |
| } |
| |
| if (bad > 0) { |
| return ErrorAbort(state, kSetMetadataFailure, "%s: some changes failed", name); |
| } |
| |
| return StringValue(""); |
| } |
| |
| Value* GetPropFn(const char* name, State* state, int argc, Expr* argv[]) { |
| if (argc != 1) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() expects 1 arg, got %d", name, argc); |
| } |
| std::string key; |
| if (!Evaluate(state, argv[0], &key)) { |
| return nullptr; |
| } |
| std::string value = android::base::GetProperty(key, ""); |
| |
| return StringValue(value); |
| } |
| |
| // file_getprop(file, key) |
| // |
| // interprets 'file' as a getprop-style file (key=value pairs, one |
| // per line. # comment lines, blank lines, lines without '=' ignored), |
| // and returns the value for 'key' (or "" if it isn't defined). |
| Value* FileGetPropFn(const char* name, State* state, int argc, Expr* argv[]) { |
| if (argc != 2) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() expects 2 args, got %d", name, argc); |
| } |
| |
| std::vector<std::string> args; |
| if (!ReadArgs(state, 2, argv, &args)) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() Failed to parse the argument(s)", name); |
| } |
| const std::string& filename = args[0]; |
| const std::string& key = args[1]; |
| |
| struct stat st; |
| if (stat(filename.c_str(), &st) < 0) { |
| return ErrorAbort(state, kFileGetPropFailure, "%s: failed to stat \"%s\": %s", name, |
| filename.c_str(), strerror(errno)); |
| } |
| |
| constexpr off_t MAX_FILE_GETPROP_SIZE = 65536; |
| if (st.st_size > MAX_FILE_GETPROP_SIZE) { |
| return ErrorAbort(state, kFileGetPropFailure, "%s too large for %s (max %lld)", |
| filename.c_str(), name, static_cast<long long>(MAX_FILE_GETPROP_SIZE)); |
| } |
| |
| std::string buffer(st.st_size, '\0'); |
| FILE* f = ota_fopen(filename.c_str(), "rb"); |
| if (f == nullptr) { |
| return ErrorAbort(state, kFileOpenFailure, "%s: failed to open %s: %s", name, |
| filename.c_str(), strerror(errno)); |
| } |
| |
| if (ota_fread(&buffer[0], 1, st.st_size, f) != static_cast<size_t>(st.st_size)) { |
| ErrorAbort(state, kFreadFailure, "%s: failed to read %zu bytes from %s", |
| name, static_cast<size_t>(st.st_size), filename.c_str()); |
| ota_fclose(f); |
| return nullptr; |
| } |
| |
| ota_fclose(f); |
| |
| std::vector<std::string> lines = android::base::Split(buffer, "\n"); |
| for (size_t i = 0; i < lines.size(); i++) { |
| std::string line = android::base::Trim(lines[i]); |
| |
| // comment or blank line: skip to next line |
| if (line.empty() || line[0] == '#') { |
| continue; |
| } |
| size_t equal_pos = line.find('='); |
| if (equal_pos == std::string::npos) { |
| continue; |
| } |
| |
| // trim whitespace between key and '=' |
| std::string str = android::base::Trim(line.substr(0, equal_pos)); |
| |
| // not the key we're looking for |
| if (key != str) continue; |
| |
| return StringValue(android::base::Trim(line.substr(equal_pos + 1))); |
| } |
| |
| return StringValue(""); |
| } |
| |
| // apply_patch_space(bytes) |
| Value* ApplyPatchSpaceFn(const char* name, State* state, |
| int argc, Expr* argv[]) { |
| std::vector<std::string> args; |
| if (!ReadArgs(state, 1, argv, &args)) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() Failed to parse the argument(s)", name); |
| } |
| const std::string& bytes_str = args[0]; |
| |
| size_t bytes; |
| if (!android::base::ParseUint(bytes_str.c_str(), &bytes)) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s(): can't parse \"%s\" as byte count\n\n", |
| name, bytes_str.c_str()); |
| } |
| |
| return StringValue(CacheSizeCheck(bytes) ? "" : "t"); |
| } |
| |
| // apply_patch(file, size, init_sha1, tgt_sha1, patch) |
| |
| Value* ApplyPatchFn(const char* name, State* state, int argc, Expr* argv[]) { |
| if (argc < 6 || (argc % 2) == 1) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s(): expected at least 6 args and an " |
| "even number, got %d", name, argc); |
| } |
| |
| std::vector<std::string> args; |
| if (!ReadArgs(state, 4, argv, &args)) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() Failed to parse the argument(s)", name); |
| } |
| const std::string& source_filename = args[0]; |
| const std::string& target_filename = args[1]; |
| const std::string& target_sha1 = args[2]; |
| const std::string& target_size_str = args[3]; |
| |
| size_t target_size; |
| if (!android::base::ParseUint(target_size_str.c_str(), &target_size)) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s(): can't parse \"%s\" as byte count", |
| name, target_size_str.c_str()); |
| } |
| |
| int patchcount = (argc-4) / 2; |
| std::vector<std::unique_ptr<Value>> arg_values; |
| if (!ReadValueArgs(state, argc-4, argv+4, &arg_values)) { |
| return nullptr; |
| } |
| |
| for (int i = 0; i < patchcount; ++i) { |
| if (arg_values[i * 2]->type != VAL_STRING) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s(): sha-1 #%d is not string", name, |
| i * 2); |
| } |
| if (arg_values[i * 2 + 1]->type != VAL_BLOB) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s(): patch #%d is not blob", name, |
| i * 2 + 1); |
| } |
| } |
| |
| std::vector<std::string> patch_sha_str; |
| std::vector<std::unique_ptr<Value>> patches; |
| for (int i = 0; i < patchcount; ++i) { |
| patch_sha_str.push_back(arg_values[i * 2]->data); |
| patches.push_back(std::move(arg_values[i * 2 + 1])); |
| } |
| |
| int result = applypatch(source_filename.c_str(), target_filename.c_str(), |
| target_sha1.c_str(), target_size, |
| patch_sha_str, patches, nullptr); |
| |
| return StringValue(result == 0 ? "t" : ""); |
| } |
| |
| // apply_patch_check(file, [sha1_1, ...]) |
| Value* ApplyPatchCheckFn(const char* name, State* state, |
| int argc, Expr* argv[]) { |
| if (argc < 1) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s(): expected at least 1 arg, got %d", |
| name, argc); |
| } |
| |
| std::vector<std::string> args; |
| if (!ReadArgs(state, 1, argv, &args)) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() Failed to parse the argument(s)", name); |
| } |
| const std::string& filename = args[0]; |
| |
| std::vector<std::string> sha1s; |
| if (!ReadArgs(state, argc - 1, argv + 1, &sha1s)) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() Failed to parse the argument(s)", name); |
| } |
| int result = applypatch_check(filename.c_str(), sha1s); |
| |
| return StringValue(result == 0 ? "t" : ""); |
| } |
| |
| // This is the updater side handler for ui_print() in edify script. Contents |
| // will be sent over to the recovery side for on-screen display. |
| Value* UIPrintFn(const char* name, State* state, int argc, Expr* argv[]) { |
| std::vector<std::string> args; |
| if (!ReadArgs(state, argc, argv, &args)) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() Failed to parse the argument(s)", name); |
| } |
| |
| std::string buffer = android::base::Join(args, "") + "\n"; |
| uiPrint(state, buffer); |
| return StringValue(buffer); |
| } |
| |
| Value* WipeCacheFn(const char* name, State* state, int argc, Expr* argv[]) { |
| if (argc != 0) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() expects no args, got %d", name, argc); |
| } |
| fprintf(((UpdaterInfo*)(state->cookie))->cmd_pipe, "wipe_cache\n"); |
| return StringValue("t"); |
| } |
| |
| Value* RunProgramFn(const char* name, State* state, int argc, Expr* argv[]) { |
| if (argc < 1) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() expects at least 1 arg", name); |
| } |
| |
| std::vector<std::string> args; |
| if (!ReadArgs(state, argc, argv, &args)) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() Failed to parse the argument(s)", name); |
| } |
| |
| char* args2[argc+1]; |
| for (int i = 0; i < argc; i++) { |
| args2[i] = &args[i][0]; |
| } |
| args2[argc] = nullptr; |
| |
| printf("about to run program [%s] with %d args\n", args2[0], argc); |
| |
| pid_t child = fork(); |
| if (child == 0) { |
| execv(args2[0], args2); |
| printf("run_program: execv failed: %s\n", strerror(errno)); |
| _exit(1); |
| } |
| int status; |
| waitpid(child, &status, 0); |
| if (WIFEXITED(status)) { |
| if (WEXITSTATUS(status) != 0) { |
| printf("run_program: child exited with status %d\n", |
| WEXITSTATUS(status)); |
| } |
| } else if (WIFSIGNALED(status)) { |
| printf("run_program: child terminated by signal %d\n", |
| WTERMSIG(status)); |
| } |
| |
| return StringValue(android::base::StringPrintf("%d", status)); |
| } |
| |
| // sha1_check(data) |
| // to return the sha1 of the data (given in the format returned by |
| // read_file). |
| // |
| // sha1_check(data, sha1_hex, [sha1_hex, ...]) |
| // returns the sha1 of the file if it matches any of the hex |
| // strings passed, or "" if it does not equal any of them. |
| // |
| Value* Sha1CheckFn(const char* name, State* state, int argc, Expr* argv[]) { |
| if (argc < 1) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() expects at least 1 arg", name); |
| } |
| |
| std::vector<std::unique_ptr<Value>> args; |
| if (!ReadValueArgs(state, argc, argv, &args)) { |
| return nullptr; |
| } |
| |
| if (args[0]->type == VAL_INVALID) { |
| return StringValue(""); |
| } |
| uint8_t digest[SHA_DIGEST_LENGTH]; |
| SHA1(reinterpret_cast<const uint8_t*>(args[0]->data.c_str()), args[0]->data.size(), digest); |
| |
| if (argc == 1) { |
| return StringValue(print_sha1(digest)); |
| } |
| |
| for (int i = 1; i < argc; ++i) { |
| uint8_t arg_digest[SHA_DIGEST_LENGTH]; |
| if (args[i]->type != VAL_STRING) { |
| printf("%s(): arg %d is not a string; skipping", name, i); |
| } else if (ParseSha1(args[i]->data.c_str(), arg_digest) != 0) { |
| // Warn about bad args and skip them. |
| printf("%s(): error parsing \"%s\" as sha-1; skipping", name, args[i]->data.c_str()); |
| } else if (memcmp(digest, arg_digest, SHA_DIGEST_LENGTH) == 0) { |
| // Found a match. |
| return args[i].release(); |
| } |
| } |
| |
| // Didn't match any of the hex strings; return false. |
| return StringValue(""); |
| } |
| |
| // Read a local file and return its contents (the Value* returned |
| // is actually a FileContents*). |
| Value* ReadFileFn(const char* name, State* state, int argc, Expr* argv[]) { |
| if (argc != 1) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() expects 1 arg, got %d", name, argc); |
| } |
| |
| std::vector<std::string> args; |
| if (!ReadArgs(state, 1, argv, &args)) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() Failed to parse the argument(s)", name); |
| } |
| const std::string& filename = args[0]; |
| |
| Value* v = new Value(VAL_INVALID, ""); |
| |
| FileContents fc; |
| if (LoadFileContents(filename.c_str(), &fc) == 0) { |
| v->type = VAL_BLOB; |
| v->data = std::string(fc.data.begin(), fc.data.end()); |
| } |
| return v; |
| } |
| |
| // write_value(value, filename) |
| // Writes 'value' to 'filename'. |
| // Example: write_value("960000", "/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq") |
| Value* WriteValueFn(const char* name, State* state, int argc, Expr* argv[]) { |
| if (argc != 2) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() expects 2 args, got %d", name, argc); |
| } |
| |
| std::vector<std::string> args; |
| if (!ReadArgs(state, 2, argv, &args)) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s(): Failed to parse the argument(s)", name); |
| } |
| |
| const std::string& filename = args[1]; |
| if (filename.empty()) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s(): Filename cannot be empty", name); |
| } |
| |
| const std::string& value = args[0]; |
| if (!android::base::WriteStringToFile(value, filename)) { |
| printf("%s: Failed to write to \"%s\": %s\n", name, filename.c_str(), strerror(errno)); |
| return StringValue(""); |
| } else { |
| return StringValue("t"); |
| } |
| } |
| |
| // Immediately reboot the device. Recovery is not finished normally, |
| // so if you reboot into recovery it will re-start applying the |
| // current package (because nothing has cleared the copy of the |
| // arguments stored in the BCB). |
| // |
| // The argument is the partition name passed to the android reboot |
| // property. It can be "recovery" to boot from the recovery |
| // partition, or "" (empty string) to boot from the regular boot |
| // partition. |
| Value* RebootNowFn(const char* name, State* state, int argc, Expr* argv[]) { |
| if (argc != 2) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() expects 2 args, got %d", name, argc); |
| } |
| |
| std::vector<std::string> args; |
| if (!ReadArgs(state, 2, argv, &args)) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() Failed to parse the argument(s)", name); |
| } |
| const std::string& filename = args[0]; |
| const std::string& property = args[1]; |
| |
| // zero out the 'command' field of the bootloader message. |
| char buffer[80]; |
| memset(buffer, 0, sizeof(((struct bootloader_message*)0)->command)); |
| FILE* f = ota_fopen(filename.c_str(), "r+b"); |
| fseek(f, offsetof(struct bootloader_message, command), SEEK_SET); |
| ota_fwrite(buffer, sizeof(((struct bootloader_message*)0)->command), 1, f); |
| ota_fclose(f); |
| |
| std::string reboot_cmd = "reboot,"; |
| reboot_cmd += property; |
| android::base::SetProperty(ANDROID_RB_PROPERTY, reboot_cmd); |
| |
| sleep(5); |
| return ErrorAbort(state, kRebootFailure, "%s() failed to reboot", name); |
| } |
| |
| // Store a string value somewhere that future invocations of recovery |
| // can access it. This value is called the "stage" and can be used to |
| // drive packages that need to do reboots in the middle of |
| // installation and keep track of where they are in the multi-stage |
| // install. |
| // |
| // The first argument is the block device for the misc partition |
| // ("/misc" in the fstab), which is where this value is stored. The |
| // second argument is the string to store; it should not exceed 31 |
| // bytes. |
| Value* SetStageFn(const char* name, State* state, int argc, Expr* argv[]) { |
| if (argc != 2) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() expects 2 args, got %d", name, argc); |
| } |
| |
| std::vector<std::string> args; |
| if (!ReadArgs(state, 2, argv, &args)) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() Failed to parse the argument(s)", name); |
| } |
| const std::string& filename = args[0]; |
| std::string& stagestr = args[1]; |
| |
| // Store this value in the misc partition, immediately after the |
| // bootloader message that the main recovery uses to save its |
| // arguments in case of the device restarting midway through |
| // package installation. |
| FILE* f = ota_fopen(filename.c_str(), "r+b"); |
| fseek(f, offsetof(struct bootloader_message, stage), SEEK_SET); |
| size_t to_write = stagestr.size(); |
| size_t max_size = sizeof(((struct bootloader_message*)0)->stage); |
| if (to_write > max_size) { |
| to_write = max_size; |
| stagestr = stagestr.substr(0, max_size-1); |
| } |
| size_t status = ota_fwrite(stagestr.c_str(), to_write, 1, f); |
| ota_fclose(f); |
| |
| if (status != to_write) { |
| return StringValue(""); |
| } |
| return StringValue(filename); |
| } |
| |
| // Return the value most recently saved with SetStageFn. The argument |
| // is the block device for the misc partition. |
| Value* GetStageFn(const char* name, State* state, int argc, Expr* argv[]) { |
| if (argc != 1) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() expects 1 arg, got %d", name, argc); |
| } |
| |
| std::vector<std::string> args; |
| if (!ReadArgs(state, 1, argv, &args)) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() Failed to parse the argument(s)", name); |
| } |
| const std::string& filename = args[0]; |
| |
| char buffer[sizeof(((struct bootloader_message*)0)->stage)]; |
| FILE* f = ota_fopen(filename.c_str(), "rb"); |
| fseek(f, offsetof(struct bootloader_message, stage), SEEK_SET); |
| size_t status = ota_fread(buffer, sizeof(buffer), 1, f); |
| ota_fclose(f); |
| if (status != sizeof(buffer)) { |
| return StringValue(""); |
| } |
| |
| buffer[sizeof(buffer)-1] = '\0'; |
| return StringValue(buffer); |
| } |
| |
| Value* WipeBlockDeviceFn(const char* name, State* state, int argc, Expr* argv[]) { |
| if (argc != 2) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() expects 2 args, got %d", name, argc); |
| } |
| |
| std::vector<std::string> args; |
| if (!ReadArgs(state, 2, argv, &args)) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() Failed to parse the argument(s)", name); |
| } |
| const std::string& filename = args[0]; |
| const std::string& len_str = args[1]; |
| |
| size_t len; |
| if (!android::base::ParseUint(len_str.c_str(), &len)) { |
| return nullptr; |
| } |
| int fd = ota_open(filename.c_str(), O_WRONLY, 0644); |
| // The wipe_block_device function in ext4_utils returns 0 on success and 1 |
| // for failure. |
| int status = wipe_block_device(fd, len); |
| |
| ota_close(fd); |
| |
| return StringValue((status == 0) ? "t" : ""); |
| } |
| |
| Value* EnableRebootFn(const char* name, State* state, int argc, Expr* argv[]) { |
| if (argc != 0) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() expects no args, got %d", name, argc); |
| } |
| UpdaterInfo* ui = (UpdaterInfo*)(state->cookie); |
| fprintf(ui->cmd_pipe, "enable_reboot\n"); |
| return StringValue("t"); |
| } |
| |
| Value* Tune2FsFn(const char* name, State* state, int argc, Expr* argv[]) { |
| if (argc == 0) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() expects args, got %d", name, argc); |
| } |
| |
| std::vector<std::string> args; |
| if (!ReadArgs(state, argc, argv, &args)) { |
| return ErrorAbort(state, kArgsParsingFailure, "%s() could not read args", name); |
| } |
| |
| char* args2[argc+1]; |
| // Tune2fs expects the program name as its args[0] |
| args2[0] = const_cast<char*>(name); |
| if (args2[0] == nullptr) { |
| return nullptr; |
| } |
| for (int i = 0; i < argc; ++i) { |
| args2[i + 1] = &args[i][0]; |
| } |
| |
| // tune2fs changes the file system parameters on an ext2 file system; it |
| // returns 0 on success. |
| int result = tune2fs_main(argc + 1, args2); |
| |
| if (result != 0) { |
| return ErrorAbort(state, kTune2FsFailure, "%s() returned error code %d", name, result); |
| } |
| return StringValue("t"); |
| } |
| |
| void RegisterInstallFunctions() { |
| RegisterFunction("mount", MountFn); |
| RegisterFunction("is_mounted", IsMountedFn); |
| RegisterFunction("unmount", UnmountFn); |
| RegisterFunction("format", FormatFn); |
| RegisterFunction("show_progress", ShowProgressFn); |
| RegisterFunction("set_progress", SetProgressFn); |
| RegisterFunction("delete", DeleteFn); |
| RegisterFunction("delete_recursive", DeleteFn); |
| RegisterFunction("package_extract_dir", PackageExtractDirFn); |
| RegisterFunction("package_extract_file", PackageExtractFileFn); |
| RegisterFunction("symlink", SymlinkFn); |
| |
| // Usage: |
| // set_metadata("filename", "key1", "value1", "key2", "value2", ...) |
| // Example: |
| // set_metadata("/system/bin/netcfg", "uid", 0, "gid", 3003, "mode", 02750, "selabel", "u:object_r:system_file:s0", "capabilities", 0x0); |
| RegisterFunction("set_metadata", SetMetadataFn); |
| |
| // Usage: |
| // set_metadata_recursive("dirname", "key1", "value1", "key2", "value2", ...) |
| // Example: |
| // set_metadata_recursive("/system", "uid", 0, "gid", 0, "fmode", 0644, "dmode", 0755, "selabel", "u:object_r:system_file:s0", "capabilities", 0x0); |
| RegisterFunction("set_metadata_recursive", SetMetadataFn); |
| |
| RegisterFunction("getprop", GetPropFn); |
| RegisterFunction("file_getprop", FileGetPropFn); |
| |
| RegisterFunction("apply_patch", ApplyPatchFn); |
| RegisterFunction("apply_patch_check", ApplyPatchCheckFn); |
| RegisterFunction("apply_patch_space", ApplyPatchSpaceFn); |
| |
| RegisterFunction("wipe_block_device", WipeBlockDeviceFn); |
| |
| RegisterFunction("read_file", ReadFileFn); |
| RegisterFunction("sha1_check", Sha1CheckFn); |
| RegisterFunction("rename", RenameFn); |
| RegisterFunction("write_value", WriteValueFn); |
| |
| RegisterFunction("wipe_cache", WipeCacheFn); |
| |
| RegisterFunction("ui_print", UIPrintFn); |
| |
| RegisterFunction("run_program", RunProgramFn); |
| |
| RegisterFunction("reboot_now", RebootNowFn); |
| RegisterFunction("get_stage", GetStageFn); |
| RegisterFunction("set_stage", SetStageFn); |
| |
| RegisterFunction("enable_reboot", EnableRebootFn); |
| RegisterFunction("tune2fs", Tune2FsFn); |
| } |