| # Put some miscellaneous rules here |
| |
| # HACK: clear LOCAL_PATH from including last build target before calling |
| # intermedites-dir-for |
| LOCAL_PATH := $(BUILD_SYSTEM) |
| |
| # Pick a reasonable string to use to identify files. |
| ifneq (,$(filter eng.%,$(BUILD_NUMBER))) |
| # BUILD_NUMBER has a timestamp in it, which means that |
| # it will change every time. Pick a stable value. |
| FILE_NAME_TAG := eng.$(USER) |
| else |
| FILE_NAME_TAG := $(BUILD_NUMBER) |
| endif |
| |
| # ----------------------------------------------------------------- |
| # Define rules to copy PRODUCT_COPY_FILES defined by the product. |
| # PRODUCT_COPY_FILES contains words like <source file>:<dest file>[:<owner>]. |
| # <dest file> is relative to $(PRODUCT_OUT), so it should look like, |
| # e.g., "system/etc/file.xml". |
| # The filter part means "only eval the copy-one-file rule if this |
| # src:dest pair is the first one to match the same dest" |
| #$(1): the src:dest pair |
| define check-product-copy-files |
| $(if $(filter %.apk, $(call word-colon, 2, $(1))),$(error \ |
| Prebuilt apk found in PRODUCT_COPY_FILES: $(1), use BUILD_PREBUILT instead!)) |
| endef |
| # filter out the duplicate <source file>:<dest file> pairs. |
| unique_product_copy_files_pairs := |
| $(foreach cf,$(PRODUCT_COPY_FILES), \ |
| $(if $(filter $(unique_product_copy_files_pairs),$(cf)),,\ |
| $(eval unique_product_copy_files_pairs += $(cf)))) |
| unique_product_copy_files_destinations := |
| $(foreach cf,$(unique_product_copy_files_pairs), \ |
| $(eval _src := $(call word-colon,1,$(cf))) \ |
| $(eval _dest := $(call word-colon,2,$(cf))) \ |
| $(call check-product-copy-files,$(cf)) \ |
| $(if $(filter $(unique_product_copy_files_destinations),$(_dest)), \ |
| $(info PRODUCT_COPY_FILES $(cf) ignored.), \ |
| $(eval _fulldest := $(call append-path,$(PRODUCT_OUT),$(_dest))) \ |
| $(if $(filter %.xml,$(_dest)),\ |
| $(eval $(call copy-xml-file-checked,$(_src),$(_fulldest))),\ |
| $(eval $(call copy-one-file,$(_src),$(_fulldest)))) \ |
| $(eval ALL_DEFAULT_INSTALLED_MODULES += $(_fulldest)) \ |
| $(eval unique_product_copy_files_destinations += $(_dest)))) |
| unique_product_copy_files_pairs := |
| unique_product_copy_files_destinations := |
| |
| # ----------------------------------------------------------------- |
| # Define rules to copy headers defined in copy_headers.mk |
| # If more than one makefile declared a header, print a warning, |
| # then copy the last one defined. This matches the previous make |
| # behavior. |
| $(foreach dest,$(ALL_COPIED_HEADERS), \ |
| $(eval _srcs := $(ALL_COPIED_HEADERS.$(dest).SRC)) \ |
| $(eval _src := $(word $(words $(_srcs)),$(_srcs))) \ |
| $(if $(call streq,$(_src),$(_srcs)),, \ |
| $(warning Duplicate header copy: $(dest)) \ |
| $(warning Defined in: $(ALL_COPIED_HEADERS.$(dest).MAKEFILE))) \ |
| $(eval $(call copy-one-header,$(_src),$(dest)))) |
| all_copied_headers: $(ALL_COPIED_HEADERS) |
| |
| # ----------------------------------------------------------------- |
| # docs/index.html |
| ifeq (,$(TARGET_BUILD_APPS)) |
| gen := $(OUT_DOCS)/index.html |
| ALL_DOCS += $(gen) |
| $(gen): frameworks/base/docs/docs-redirect-index.html |
| @mkdir -p $(dir $@) |
| @cp -f $< $@ |
| endif |
| |
| # ----------------------------------------------------------------- |
| # default.prop |
| INSTALLED_DEFAULT_PROP_TARGET := $(TARGET_ROOT_OUT)/default.prop |
| ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_DEFAULT_PROP_TARGET) |
| FINAL_DEFAULT_PROPERTIES := \ |
| $(call collapse-pairs, $(ADDITIONAL_DEFAULT_PROPERTIES)) |
| FINAL_DEFAULT_PROPERTIES += \ |
| $(call collapse-pairs, $(PRODUCT_DEFAULT_PROPERTY_OVERRIDES)) |
| FINAL_DEFAULT_PROPERTIES := $(call uniq-pairs-by-first-component, \ |
| $(FINAL_DEFAULT_PROPERTIES),=) |
| |
| intermediate_system_build_prop := $(call intermediates-dir-for,ETC,system_build_prop)/build.prop |
| |
| $(INSTALLED_DEFAULT_PROP_TARGET): $(intermediate_system_build_prop) |
| @echo Target buildinfo: $@ |
| @mkdir -p $(dir $@) |
| $(hide) echo "#" > $@; \ |
| echo "# ADDITIONAL_DEFAULT_PROPERTIES" >> $@; \ |
| echo "#" >> $@; |
| $(hide) $(foreach line,$(FINAL_DEFAULT_PROPERTIES), \ |
| echo "$(line)" >> $@;) |
| $(hide) echo "#" >> $@; \ |
| echo "# BOOTIMAGE_BUILD_PROPERTIES" >> $@; \ |
| echo "#" >> $@; |
| $(hide) echo ro.bootimage.build.date=`$(DATE_FROM_FILE)`>>$@ |
| $(hide) echo ro.bootimage.build.date.utc=`$(DATE_FROM_FILE) +%s`>>$@ |
| $(hide) echo ro.bootimage.build.fingerprint="$(BUILD_FINGERPRINT_FROM_FILE)">>$@ |
| $(hide) build/tools/post_process_props.py $@ |
| |
| # ----------------------------------------------------------------- |
| # build.prop |
| INSTALLED_BUILD_PROP_TARGET := $(TARGET_OUT)/build.prop |
| ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_BUILD_PROP_TARGET) |
| FINAL_BUILD_PROPERTIES := \ |
| $(call collapse-pairs, $(ADDITIONAL_BUILD_PROPERTIES)) |
| FINAL_BUILD_PROPERTIES := $(call uniq-pairs-by-first-component, \ |
| $(FINAL_BUILD_PROPERTIES),=) |
| |
| # A list of arbitrary tags describing the build configuration. |
| # Force ":=" so we can use += |
| BUILD_VERSION_TAGS := $(BUILD_VERSION_TAGS) |
| ifeq ($(TARGET_BUILD_TYPE),debug) |
| BUILD_VERSION_TAGS += debug |
| endif |
| # The "test-keys" tag marks builds signed with the old test keys, |
| # which are available in the SDK. "dev-keys" marks builds signed with |
| # non-default dev keys (usually private keys from a vendor directory). |
| # Both of these tags will be removed and replaced with "release-keys" |
| # when the target-files is signed in a post-build step. |
| ifeq ($(DEFAULT_SYSTEM_DEV_CERTIFICATE),build/target/product/security/testkey) |
| BUILD_KEYS := test-keys |
| else |
| BUILD_KEYS := dev-keys |
| endif |
| BUILD_VERSION_TAGS += $(BUILD_KEYS) |
| BUILD_VERSION_TAGS := $(subst $(space),$(comma),$(sort $(BUILD_VERSION_TAGS))) |
| |
| # A human-readable string that descibes this build in detail. |
| build_desc := $(TARGET_PRODUCT)-$(TARGET_BUILD_VARIANT) $(PLATFORM_VERSION) $(BUILD_ID) $(BUILD_NUMBER_FROM_FILE) $(BUILD_VERSION_TAGS) |
| $(intermediate_system_build_prop): PRIVATE_BUILD_DESC := $(build_desc) |
| |
| # The string used to uniquely identify the combined build and product; used by the OTA server. |
| ifeq (,$(strip $(BUILD_FINGERPRINT))) |
| ifneq ($(filter eng.%,$(BUILD_NUMBER)),) |
| # Trim down BUILD_FINGERPRINT: the default BUILD_NUMBER makes it easily exceed |
| # the Android system property length limit (PROPERTY_VALUE_MAX=92). |
| BF_BUILD_NUMBER := $(shell echo $${USER:0:6})$(shell $(DATE) +%m%d%H%M) |
| else |
| BF_BUILD_NUMBER := $(BUILD_NUMBER) |
| endif |
| BUILD_FINGERPRINT := $(PRODUCT_BRAND)/$(TARGET_PRODUCT)/$(TARGET_DEVICE):$(PLATFORM_VERSION)/$(BUILD_ID)/$(BF_BUILD_NUMBER):$(TARGET_BUILD_VARIANT)/$(BUILD_VERSION_TAGS) |
| endif |
| ifneq ($(words $(BUILD_FINGERPRINT)),1) |
| $(error BUILD_FINGERPRINT cannot contain spaces: "$(BUILD_FINGERPRINT)") |
| endif |
| |
| $(shell mkdir -p $(PRODUCT_OUT) && echo $(BUILD_FINGERPRINT) > $(PRODUCT_OUT)/build_fingerprint.txt) |
| BUILD_FINGERPRINT_FROM_FILE := $$(cat $(PRODUCT_OUT)/build_fingerprint.txt) |
| |
| # The string used to uniquely identify the system build; used by the OTA server. |
| # This purposefully excludes any product-specific variables. |
| ifeq (,$(strip $(BUILD_THUMBPRINT))) |
| BUILD_THUMBPRINT := $(PLATFORM_VERSION)/$(BUILD_ID)/$(BUILD_NUMBER):$(TARGET_BUILD_VARIANT)/$(BUILD_VERSION_TAGS) |
| endif |
| ifneq ($(words $(BUILD_THUMBPRINT)),1) |
| $(error BUILD_THUMBPRINT cannot contain spaces: "$(BUILD_THUMBPRINT)") |
| endif |
| |
| KNOWN_OEM_THUMBPRINT_PROPERTIES := \ |
| ro.product.brand \ |
| ro.product.name \ |
| ro.product.device |
| OEM_THUMBPRINT_PROPERTIES := $(filter $(KNOWN_OEM_THUMBPRINT_PROPERTIES),\ |
| $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_OEM_PROPERTIES)) |
| |
| # Display parameters shown under Settings -> About Phone |
| ifeq ($(TARGET_BUILD_VARIANT),user) |
| # User builds should show: |
| # release build number or branch.buld_number non-release builds |
| |
| # Dev. branches should have DISPLAY_BUILD_NUMBER set |
| ifeq (true,$(DISPLAY_BUILD_NUMBER)) |
| BUILD_DISPLAY_ID := $(BUILD_ID).$(BUILD_NUMBER_FROM_FILE) $(BUILD_KEYS) |
| else |
| BUILD_DISPLAY_ID := $(BUILD_ID) $(BUILD_KEYS) |
| endif |
| else |
| # Non-user builds should show detailed build information |
| BUILD_DISPLAY_ID := $(build_desc) |
| endif |
| |
| # Accepts a whitespace separated list of product locales such as |
| # (en_US en_AU en_GB...) and returns the first locale in the list with |
| # underscores replaced with hyphens. In the example above, this will |
| # return "en-US". |
| define get-default-product-locale |
| $(strip $(subst _,-, $(firstword $(1)))) |
| endef |
| |
| BUILDINFO_SH := build/tools/buildinfo.sh |
| |
| # TARGET_BUILD_FLAVOR and ro.build.flavor are used only by the test |
| # harness to distinguish builds. Only add _asan for a sanitized build |
| # if it isn't already a part of the flavor (via a dedicated lunch |
| # config for example). |
| TARGET_BUILD_FLAVOR := $(TARGET_PRODUCT)-$(TARGET_BUILD_VARIANT) |
| ifneq (, $(filter address, $(SANITIZE_TARGET))) |
| ifeq (,$(findstring _asan,$(TARGET_BUILD_FLAVOR))) |
| TARGET_BUILD_FLAVOR := $(TARGET_BUILD_FLAVOR)_asan |
| endif |
| endif |
| |
| ifdef TARGET_SYSTEM_PROP |
| system_prop_file := $(TARGET_SYSTEM_PROP) |
| else |
| system_prop_file := $(wildcard $(TARGET_DEVICE_DIR)/system.prop) |
| endif |
| $(intermediate_system_build_prop): $(BUILDINFO_SH) $(INTERNAL_BUILD_ID_MAKEFILE) $(BUILD_SYSTEM)/version_defaults.mk $(system_prop_file) $(INSTALLED_ANDROID_INFO_TXT_TARGET) |
| @echo Target buildinfo: $@ |
| @mkdir -p $(dir $@) |
| $(hide) echo > $@ |
| ifneq ($(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_OEM_PROPERTIES),) |
| $(hide) echo "#" >> $@; \ |
| echo "# PRODUCT_OEM_PROPERTIES" >> $@; \ |
| echo "#" >> $@; |
| $(hide) $(foreach prop,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_OEM_PROPERTIES), \ |
| echo "import /oem/oem.prop $(prop)" >> $@;) |
| endif |
| $(hide) TARGET_BUILD_TYPE="$(TARGET_BUILD_VARIANT)" \ |
| TARGET_BUILD_FLAVOR="$(TARGET_BUILD_FLAVOR)" \ |
| TARGET_DEVICE="$(TARGET_DEVICE)" \ |
| PRODUCT_NAME="$(TARGET_PRODUCT)" \ |
| PRODUCT_BRAND="$(PRODUCT_BRAND)" \ |
| PRODUCT_DEFAULT_LOCALE="$(call get-default-product-locale,$(PRODUCT_LOCALES))" \ |
| PRODUCT_DEFAULT_WIFI_CHANNELS="$(PRODUCT_DEFAULT_WIFI_CHANNELS)" \ |
| PRODUCT_MODEL="$(PRODUCT_MODEL)" \ |
| PRODUCT_MANUFACTURER="$(PRODUCT_MANUFACTURER)" \ |
| PRIVATE_BUILD_DESC="$(PRIVATE_BUILD_DESC)" \ |
| BUILD_ID="$(BUILD_ID)" \ |
| BUILD_DISPLAY_ID="$(BUILD_DISPLAY_ID)" \ |
| DATE="$(DATE_FROM_FILE)" \ |
| BUILD_NUMBER="$(BUILD_NUMBER_FROM_FILE)" \ |
| BOARD_BUILD_SYSTEM_ROOT_IMAGE="$(BOARD_BUILD_SYSTEM_ROOT_IMAGE)" \ |
| AB_OTA_UPDATER="$(AB_OTA_UPDATER)" \ |
| PLATFORM_VERSION="$(PLATFORM_VERSION)" \ |
| PLATFORM_SECURITY_PATCH="$(PLATFORM_SECURITY_PATCH)" \ |
| PLATFORM_BASE_OS="$(PLATFORM_BASE_OS)" \ |
| PLATFORM_SDK_VERSION="$(PLATFORM_SDK_VERSION)" \ |
| PLATFORM_PREVIEW_SDK_VERSION="$(PLATFORM_PREVIEW_SDK_VERSION)" \ |
| PLATFORM_VERSION_CODENAME="$(PLATFORM_VERSION_CODENAME)" \ |
| PLATFORM_VERSION_ALL_CODENAMES="$(PLATFORM_VERSION_ALL_CODENAMES)" \ |
| BUILD_VERSION_TAGS="$(BUILD_VERSION_TAGS)" \ |
| TARGET_BOOTLOADER_BOARD_NAME="$(TARGET_BOOTLOADER_BOARD_NAME)" \ |
| BUILD_FINGERPRINT="$(BUILD_FINGERPRINT_FROM_FILE)" \ |
| $(if $(OEM_THUMBPRINT_PROPERTIES),BUILD_THUMBPRINT="$(BUILD_THUMBPRINT)") \ |
| TARGET_BOARD_PLATFORM="$(TARGET_BOARD_PLATFORM)" \ |
| TARGET_CPU_ABI_LIST="$(TARGET_CPU_ABI_LIST)" \ |
| TARGET_CPU_ABI_LIST_32_BIT="$(TARGET_CPU_ABI_LIST_32_BIT)" \ |
| TARGET_CPU_ABI_LIST_64_BIT="$(TARGET_CPU_ABI_LIST_64_BIT)" \ |
| TARGET_CPU_ABI="$(TARGET_CPU_ABI)" \ |
| TARGET_CPU_ABI2="$(TARGET_CPU_ABI2)" \ |
| TARGET_AAPT_CHARACTERISTICS="$(TARGET_AAPT_CHARACTERISTICS)" \ |
| bash $(BUILDINFO_SH) >> $@ |
| $(hide) $(foreach file,$(system_prop_file), \ |
| if [ -f "$(file)" ]; then \ |
| echo "#" >> $@; \ |
| echo Target buildinfo from: "$(file)"; \ |
| echo "# from $(file)" >> $@; \ |
| echo "#" >> $@; \ |
| cat $(file) >> $@; \ |
| fi;) |
| $(if $(FINAL_BUILD_PROPERTIES), \ |
| $(hide) echo >> $@; \ |
| echo "#" >> $@; \ |
| echo "# ADDITIONAL_BUILD_PROPERTIES" >> $@; \ |
| echo "#" >> $@; ) |
| $(hide) $(foreach line,$(FINAL_BUILD_PROPERTIES), \ |
| echo "$(line)" >> $@;) |
| $(hide) cat $(INSTALLED_ANDROID_INFO_TXT_TARGET) | grep 'require version-' | sed -e 's/require version-/ro.build.expect./g' >> $@ |
| $(hide) build/tools/post_process_props.py $@ $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_PROPERTY_BLACKLIST) |
| |
| build_desc := |
| |
| ifeq (,$(filter true, $(TARGET_NO_KERNEL) $(TARGET_NO_RECOVERY))) |
| INSTALLED_RECOVERYIMAGE_TARGET := $(PRODUCT_OUT)/recovery.img |
| else |
| INSTALLED_RECOVERYIMAGE_TARGET := |
| endif |
| |
| $(INSTALLED_BUILD_PROP_TARGET): $(intermediate_system_build_prop) $(INSTALLED_RECOVERYIMAGE_TARGET) |
| @echo "Target build info: $@" |
| $(hide) cat $(intermediate_system_build_prop) > $@ |
| ifdef INSTALLED_RECOVERYIMAGE_TARGET |
| $(hide) echo ro.expect.recovery_id=`cat $(RECOVERYIMAGE_ID_FILE)` >> $@ |
| endif |
| |
| # ----------------------------------------------------------------- |
| # vendor build.prop |
| # |
| # For verifying that the vendor build is what we think it is |
| ifdef BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE |
| INSTALLED_VENDOR_BUILD_PROP_TARGET := $(TARGET_OUT_VENDOR)/build.prop |
| ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_VENDOR_BUILD_PROP_TARGET) |
| $(INSTALLED_VENDOR_BUILD_PROP_TARGET): $(INSTALLED_BUILD_PROP_TARGET) |
| @echo Target vendor buildinfo: $@ |
| @mkdir -p $(dir $@) |
| $(hide) echo > $@ |
| $(hide) echo ro.vendor.build.date=`$(DATE_FROM_FILE)`>>$@ |
| $(hide) echo ro.vendor.build.date.utc=`$(DATE_FROM_FILE) +%s`>>$@ |
| $(hide) echo ro.vendor.build.fingerprint="$(BUILD_FINGERPRINT_FROM_FILE)">>$@ |
| endif |
| |
| # ---------------------------------------------------------------- |
| |
| # ----------------------------------------------------------------- |
| # sdk-build.prop |
| # |
| # There are certain things in build.prop that we don't want to |
| # ship with the sdk; remove them. |
| |
| # This must be a list of entire property keys followed by |
| # "=" characters, without any internal spaces. |
| sdk_build_prop_remove := \ |
| ro.build.user= \ |
| ro.build.host= \ |
| ro.product.brand= \ |
| ro.product.manufacturer= \ |
| ro.product.device= |
| # TODO: Remove this soon-to-be obsolete property |
| sdk_build_prop_remove += ro.build.product= |
| INSTALLED_SDK_BUILD_PROP_TARGET := $(PRODUCT_OUT)/sdk/sdk-build.prop |
| $(INSTALLED_SDK_BUILD_PROP_TARGET): $(INSTALLED_BUILD_PROP_TARGET) |
| @echo SDK buildinfo: $@ |
| @mkdir -p $(dir $@) |
| $(hide) grep -v "$(subst $(space),\|,$(strip \ |
| $(sdk_build_prop_remove)))" $< > $@.tmp |
| $(hide) for x in $(sdk_build_prop_remove); do \ |
| echo "$$x"generic >> $@.tmp; done |
| $(hide) mv $@.tmp $@ |
| |
| # ----------------------------------------------------------------- |
| # package stats |
| PACKAGE_STATS_FILE := $(PRODUCT_OUT)/package-stats.txt |
| PACKAGES_TO_STAT := \ |
| $(sort $(filter $(TARGET_OUT)/% $(TARGET_OUT_DATA)/%, \ |
| $(filter %.jar %.apk, $(ALL_DEFAULT_INSTALLED_MODULES)))) |
| $(PACKAGE_STATS_FILE): $(PACKAGES_TO_STAT) |
| @echo Package stats: $@ |
| @mkdir -p $(dir $@) |
| $(hide) rm -f $@ |
| ifeq ($(PACKAGES_TO_STAT),) |
| # Create empty package stats file if target builds no jar(s) or apk(s). |
| $(hide) touch $@ |
| else |
| $(hide) build/tools/dump-package-stats $^ > $@ |
| endif |
| |
| .PHONY: package-stats |
| package-stats: $(PACKAGE_STATS_FILE) |
| |
| # ----------------------------------------------------------------- |
| # Cert-to-package mapping. Used by the post-build signing tools. |
| # Use a macro to add newline to each echo command |
| define _apkcerts_echo_with_newline |
| $(hide) echo $(1) |
| |
| endef |
| |
| name := $(TARGET_PRODUCT) |
| ifeq ($(TARGET_BUILD_TYPE),debug) |
| name := $(name)_debug |
| endif |
| name := $(name)-apkcerts-$(FILE_NAME_TAG) |
| intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,apkcerts) |
| APKCERTS_FILE := $(intermediates)/$(name).txt |
| # We don't need to really build all the modules. |
| # TODO: rebuild APKCERTS_FILE if any app change its cert. |
| $(APKCERTS_FILE): |
| @echo APK certs list: $@ |
| @mkdir -p $(dir $@) |
| @rm -f $@ |
| $(foreach p,$(PACKAGES),\ |
| $(if $(PACKAGES.$(p).EXTERNAL_KEY),\ |
| $(call _apkcerts_echo_with_newline,\ |
| 'name="$(p).apk" certificate="EXTERNAL" \ |
| private_key=""' >> $@),\ |
| $(call _apkcerts_echo_with_newline,\ |
| 'name="$(p).apk" certificate="$(PACKAGES.$(p).CERTIFICATE)" \ |
| private_key="$(PACKAGES.$(p).PRIVATE_KEY)"' >> $@))) |
| # In case value of PACKAGES is empty. |
| $(hide) touch $@ |
| |
| .PHONY: apkcerts-list |
| apkcerts-list: $(APKCERTS_FILE) |
| |
| ifneq (,$(TARGET_BUILD_APPS)) |
| $(call dist-for-goals, apps_only, $(APKCERTS_FILE):apkcerts.txt) |
| endif |
| |
| # ----------------------------------------------------------------- |
| # build system stats |
| BUILD_SYSTEM_STATS := $(PRODUCT_OUT)/build_system_stats.txt |
| $(BUILD_SYSTEM_STATS): |
| @rm -f $@ |
| @$(foreach s,$(STATS.MODULE_TYPE),echo "modules_type_make,$(s),$(words $(STATS.MODULE_TYPE.$(s)))" >>$@;) |
| @$(foreach s,$(STATS.SOONG_MODULE_TYPE),echo "modules_type_soong,$(s),$(STATS.SOONG_MODULE_TYPE.$(s))" >>$@;) |
| $(call dist-for-goals,droidcore,$(BUILD_SYSTEM_STATS)) |
| |
| # ----------------------------------------------------------------- |
| # Modules ready to be converted to Soong, ordered by how many |
| # modules depend on them. |
| SOONG_CONV := $(sort $(SOONG_CONV)) |
| SOONG_CONV_DATA := $(call intermediates-dir-for,PACKAGING,soong_conversion)/soong_conv_data |
| $(SOONG_CONV_DATA): |
| @rm -f $@ |
| @$(foreach s,$(SOONG_CONV),echo "$(s),$(sort $(SOONG_CONV.$(s).PROBLEMS)),$(sort $(filter-out $(SOONG_ALREADY_CONV),$(SOONG_CONV.$(s).DEPS)))" >>$@;) |
| |
| SOONG_TO_CONVERT_SCRIPT := build/tools/soong_to_convert.py |
| SOONG_TO_CONVERT := $(PRODUCT_OUT)/soong_to_convert.txt |
| $(SOONG_TO_CONVERT): $(SOONG_CONV_DATA) $(SOONG_TO_CONVERT_SCRIPT) |
| @rm -f $@ |
| $(hide) $(SOONG_TO_CONVERT_SCRIPT) $< >$@ |
| $(call dist-for-goals,droidcore,$(SOONG_TO_CONVERT)) |
| |
| # ----------------------------------------------------------------- |
| # The dev key is used to sign this package, and as the key required |
| # for future OTA packages installed by this system. Actual product |
| # deliverables will be re-signed by hand. We expect this file to |
| # exist with the suffixes ".x509.pem" and ".pk8". |
| DEFAULT_KEY_CERT_PAIR := $(DEFAULT_SYSTEM_DEV_CERTIFICATE) |
| |
| |
| # Rules that need to be present for the all targets, even |
| # if they don't do anything. |
| .PHONY: systemimage |
| systemimage: |
| |
| # ----------------------------------------------------------------- |
| |
| .PHONY: event-log-tags |
| |
| # Produce an event logs tag file for everything we know about, in order |
| # to properly allocate numbers. Then produce a file that's filtered |
| # for what's going to be installed. |
| |
| all_event_log_tags_file := $(TARGET_OUT_COMMON_INTERMEDIATES)/all-event-log-tags.txt |
| |
| event_log_tags_file := $(TARGET_OUT)/etc/event-log-tags |
| |
| # Include tags from all packages that we know about |
| all_event_log_tags_src := \ |
| $(sort $(foreach m, $(ALL_MODULES), $(ALL_MODULES.$(m).EVENT_LOG_TAGS))) |
| |
| # PDK builds will already have a full list of tags that needs to get merged |
| # in with the ones from source |
| pdk_fusion_log_tags_file := $(patsubst $(PRODUCT_OUT)/%,$(_pdk_fusion_intermediates)/%,$(filter $(event_log_tags_file),$(ALL_PDK_FUSION_FILES))) |
| |
| $(all_event_log_tags_file): PRIVATE_SRC_FILES := $(all_event_log_tags_src) $(pdk_fusion_log_tags_file) |
| $(all_event_log_tags_file): $(all_event_log_tags_src) $(pdk_fusion_log_tags_file) $(MERGETAGS) build/tools/event_log_tags.py |
| $(hide) mkdir -p $(dir $@) |
| $(hide) $(MERGETAGS) -o $@ $(PRIVATE_SRC_FILES) |
| |
| # Include tags from all packages included in this product, plus all |
| # tags that are part of the system (ie, not in a vendor/ or device/ |
| # directory). |
| event_log_tags_src := \ |
| $(sort $(foreach m,\ |
| $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES) \ |
| $(call module-names-for-tag-list,user), \ |
| $(ALL_MODULES.$(m).EVENT_LOG_TAGS)) \ |
| $(filter-out vendor/% device/% out/%,$(all_event_log_tags_src))) |
| |
| $(event_log_tags_file): PRIVATE_SRC_FILES := $(event_log_tags_src) $(pdk_fusion_log_tags_file) |
| $(event_log_tags_file): PRIVATE_MERGED_FILE := $(all_event_log_tags_file) |
| $(event_log_tags_file): $(event_log_tags_src) $(all_event_log_tags_file) $(pdk_fusion_log_tags_file) $(MERGETAGS) build/tools/event_log_tags.py |
| $(hide) mkdir -p $(dir $@) |
| $(hide) $(MERGETAGS) -o $@ -m $(PRIVATE_MERGED_FILE) $(PRIVATE_SRC_FILES) |
| |
| event-log-tags: $(event_log_tags_file) |
| |
| ALL_DEFAULT_INSTALLED_MODULES += $(event_log_tags_file) |
| |
| |
| # ################################################################# |
| # Targets for boot/OS images |
| # ################################################################# |
| ifneq ($(strip $(TARGET_NO_BOOTLOADER)),true) |
| INSTALLED_BOOTLOADER_MODULE := $(PRODUCT_OUT)/bootloader |
| ifeq ($(strip $(TARGET_BOOTLOADER_IS_2ND)),true) |
| INSTALLED_2NDBOOTLOADER_TARGET := $(PRODUCT_OUT)/2ndbootloader |
| else |
| INSTALLED_2NDBOOTLOADER_TARGET := |
| endif |
| else |
| INSTALLED_BOOTLOADER_MODULE := |
| INSTALLED_2NDBOOTLOADER_TARGET := |
| endif # TARGET_NO_BOOTLOADER |
| ifneq ($(strip $(TARGET_NO_KERNEL)),true) |
| INSTALLED_KERNEL_TARGET := $(PRODUCT_OUT)/kernel |
| else |
| INSTALLED_KERNEL_TARGET := |
| endif |
| |
| # ----------------------------------------------------------------- |
| # the ramdisk |
| INTERNAL_RAMDISK_FILES := $(filter $(TARGET_ROOT_OUT)/%, \ |
| $(ALL_GENERATED_SOURCES) \ |
| $(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| BUILT_RAMDISK_TARGET := $(PRODUCT_OUT)/ramdisk.img |
| |
| # We just build this directly to the install location. |
| INSTALLED_RAMDISK_TARGET := $(BUILT_RAMDISK_TARGET) |
| $(INSTALLED_RAMDISK_TARGET): $(MKBOOTFS) $(INTERNAL_RAMDISK_FILES) | $(MINIGZIP) |
| $(call pretty,"Target ram disk: $@") |
| $(hide) $(MKBOOTFS) -d $(TARGET_OUT) $(TARGET_ROOT_OUT) | $(MINIGZIP) > $@ |
| |
| .PHONY: ramdisk-nodeps |
| ramdisk-nodeps: $(MKBOOTFS) | $(MINIGZIP) |
| @echo "make $@: ignoring dependencies" |
| $(hide) $(MKBOOTFS) -d $(TARGET_OUT) $(TARGET_ROOT_OUT) | $(MINIGZIP) > $(INSTALLED_RAMDISK_TARGET) |
| |
| ifneq ($(strip $(TARGET_NO_KERNEL)),true) |
| |
| # ----------------------------------------------------------------- |
| # the boot image, which is a collection of other images. |
| INTERNAL_BOOTIMAGE_ARGS := \ |
| $(addprefix --second ,$(INSTALLED_2NDBOOTLOADER_TARGET)) \ |
| --kernel $(INSTALLED_KERNEL_TARGET) |
| |
| ifneq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true) |
| INTERNAL_BOOTIMAGE_ARGS += --ramdisk $(INSTALLED_RAMDISK_TARGET) |
| endif |
| |
| INTERNAL_BOOTIMAGE_FILES := $(filter-out --%,$(INTERNAL_BOOTIMAGE_ARGS)) |
| |
| ifdef BOARD_KERNEL_BASE |
| INTERNAL_BOOTIMAGE_ARGS += --base $(BOARD_KERNEL_BASE) |
| endif |
| |
| ifdef BOARD_KERNEL_PAGESIZE |
| INTERNAL_BOOTIMAGE_ARGS += --pagesize $(BOARD_KERNEL_PAGESIZE) |
| endif |
| |
| ifeq ($(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY),true) |
| ifeq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true) |
| VERITY_KEYID := veritykeyid=id:`openssl x509 -in $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VERITY_SIGNING_KEY).x509.pem -text \ |
| | grep keyid | sed 's/://g' | tr -d '[:space:]' | tr '[:upper:]' '[:lower:]' | sed 's/keyid//g'` |
| endif |
| endif |
| |
| INTERNAL_KERNEL_CMDLINE := $(strip $(BOARD_KERNEL_CMDLINE) buildvariant=$(TARGET_BUILD_VARIANT) $(VERITY_KEYID)) |
| ifdef INTERNAL_KERNEL_CMDLINE |
| INTERNAL_BOOTIMAGE_ARGS += --cmdline "$(INTERNAL_KERNEL_CMDLINE)" |
| endif |
| |
| INTERNAL_MKBOOTIMG_VERSION_ARGS := \ |
| --os_version $(PLATFORM_VERSION) \ |
| --os_patch_level $(PLATFORM_SECURITY_PATCH) |
| |
| INSTALLED_BOOTIMAGE_TARGET := $(PRODUCT_OUT)/boot.img |
| |
| # BOARD_USES_RECOVERY_AS_BOOT = true must have BOARD_BUILD_SYSTEM_ROOT_IMAGE = true. |
| ifeq ($(BOARD_USES_RECOVERY_AS_BOOT),true) |
| ifneq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true) |
| $(error BOARD_BUILD_SYSTEM_ROOT_IMAGE must be enabled for BOARD_USES_RECOVERY_AS_BOOT.) |
| endif |
| endif |
| |
| # We build recovery as boot image if BOARD_USES_RECOVERY_AS_BOOT is true. |
| ifneq ($(BOARD_USES_RECOVERY_AS_BOOT),true) |
| ifeq ($(TARGET_BOOTIMAGE_USE_EXT2),true) |
| $(error TARGET_BOOTIMAGE_USE_EXT2 is not supported anymore) |
| |
| else ifeq (true,$(BOARD_AVB_ENABLE)) # TARGET_BOOTIMAGE_USE_EXT2 != true |
| |
| $(INSTALLED_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(AVBTOOL) $(INTERNAL_BOOTIMAGE_FILES) $(BOARD_AVB_BOOT_KEY_PATH) |
| $(call pretty,"Target boot image: $@") |
| $(hide) $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $@ |
| $(hide) $(call assert-max-image-size,$@,$(BOARD_BOOTIMAGE_PARTITION_SIZE)) |
| $(hide) $(AVBTOOL) add_hash_footer \ |
| --image $@ \ |
| --partition_size $(BOARD_BOOTIMAGE_PARTITION_SIZE) \ |
| --partition_name boot $(INTERNAL_AVB_BOOT_SIGNING_ARGS) \ |
| $(BOARD_AVB_BOOT_ADD_HASH_FOOTER_ARGS) |
| |
| .PHONY: bootimage-nodeps |
| bootimage-nodeps: $(MKBOOTIMG) $(AVBTOOL) $(BOARD_AVB_BOOT_KEY_PATH) |
| @echo "make $@: ignoring dependencies" |
| $(hide) $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $(INSTALLED_BOOTIMAGE_TARGET) |
| $(hide) $(call assert-max-image-size,$(INSTALLED_BOOTIMAGE_TARGET),$(BOARD_BOOTIMAGE_PARTITION_SIZE)) |
| $(hide) $(AVBTOOL) add_hash_footer \ |
| --image $@ \ |
| --partition_size $(BOARD_BOOTIMAGE_PARTITION_SIZE) \ |
| --partition_name boot $(INTERNAL_AVB_BOOT_SIGNING_ARGS) \ |
| $(BOARD_AVB_BOOT_ADD_HASH_FOOTER_ARGS) |
| |
| else ifeq (true,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_BOOT_SIGNER)) # BOARD_AVB_ENABLE != true |
| |
| $(INSTALLED_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_FILES) $(BOOT_SIGNER) |
| $(call pretty,"Target boot image: $@") |
| $(hide) $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $@ |
| $(BOOT_SIGNER) /boot $@ $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VERITY_SIGNING_KEY).pk8 $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VERITY_SIGNING_KEY).x509.pem $@ |
| $(hide) $(call assert-max-image-size,$@,$(BOARD_BOOTIMAGE_PARTITION_SIZE)) |
| |
| .PHONY: bootimage-nodeps |
| bootimage-nodeps: $(MKBOOTIMG) $(BOOT_SIGNER) |
| @echo "make $@: ignoring dependencies" |
| $(hide) $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $(INSTALLED_BOOTIMAGE_TARGET) |
| $(BOOT_SIGNER) /boot $(INSTALLED_BOOTIMAGE_TARGET) $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VERITY_SIGNING_KEY).pk8 $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VERITY_SIGNING_KEY).x509.pem $(INSTALLED_BOOTIMAGE_TARGET) |
| $(hide) $(call assert-max-image-size,$(INSTALLED_BOOTIMAGE_TARGET),$(BOARD_BOOTIMAGE_PARTITION_SIZE)) |
| |
| else ifeq (true,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VBOOT)) # PRODUCT_SUPPORTS_BOOT_SIGNER != true |
| |
| $(INSTALLED_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_FILES) $(VBOOT_SIGNER) $(FUTILITY) |
| $(call pretty,"Target boot image: $@") |
| $(hide) $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $@.unsigned |
| $(VBOOT_SIGNER) $(FUTILITY) $@.unsigned $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VBOOT_SIGNING_KEY).vbpubk $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VBOOT_SIGNING_KEY).vbprivk $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VBOOT_SIGNING_SUBKEY).vbprivk $@.keyblock $@ |
| $(hide) $(call assert-max-image-size,$@,$(BOARD_BOOTIMAGE_PARTITION_SIZE)) |
| |
| .PHONY: bootimage-nodeps |
| bootimage-nodeps: $(MKBOOTIMG) $(VBOOT_SIGNER) $(FUTILITY) |
| @echo "make $@: ignoring dependencies" |
| $(hide) $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $(INSTALLED_BOOTIMAGE_TARGET).unsigned |
| $(VBOOT_SIGNER) $(FUTILITY) $(INSTALLED_BOOTIMAGE_TARGET).unsigned $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VBOOT_SIGNING_KEY).vbpubk $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VBOOT_SIGNING_KEY).vbprivk $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VBOOT_SIGNING_SUBKEY).vbprivk $(INSTALLED_BOOTIMAGE_TARGET).keyblock $(INSTALLED_BOOTIMAGE_TARGET) |
| $(hide) $(call assert-max-image-size,$(INSTALLED_BOOTIMAGE_TARGET),$(BOARD_BOOTIMAGE_PARTITION_SIZE)) |
| |
| else # PRODUCT_SUPPORTS_VBOOT != true |
| |
| $(INSTALLED_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_FILES) |
| $(call pretty,"Target boot image: $@") |
| $(hide) $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $@ |
| $(hide) $(call assert-max-image-size,$@,$(BOARD_BOOTIMAGE_PARTITION_SIZE)) |
| |
| .PHONY: bootimage-nodeps |
| bootimage-nodeps: $(MKBOOTIMG) |
| @echo "make $@: ignoring dependencies" |
| $(hide) $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $(INSTALLED_BOOTIMAGE_TARGET) |
| $(hide) $(call assert-max-image-size,$(INSTALLED_BOOTIMAGE_TARGET),$(BOARD_BOOTIMAGE_PARTITION_SIZE)) |
| |
| endif # TARGET_BOOTIMAGE_USE_EXT2 |
| endif # BOARD_USES_RECOVERY_AS_BOOT |
| |
| else # TARGET_NO_KERNEL |
| INTERNAL_KERNEL_CMDLINE := $(strip $(BOARD_KERNEL_CMDLINE)) |
| # HACK: The top-level targets depend on the bootimage. Not all targets |
| # can produce a bootimage, though, and emulator targets need the ramdisk |
| # instead. Fake it out by calling the ramdisk the bootimage. |
| # TODO: make the emulator use bootimages, and make mkbootimg accept |
| # kernel-less inputs. |
| INSTALLED_BOOTIMAGE_TARGET := $(INSTALLED_RAMDISK_TARGET) |
| endif |
| |
| # ----------------------------------------------------------------- |
| # NOTICE files |
| # |
| # We are required to publish the licenses for all code under BSD, GPL and |
| # Apache licenses (and possibly other more exotic ones as well). We err on the |
| # side of caution, so the licenses for other third-party code are included here |
| # too. |
| # |
| # This needs to be before the systemimage rules, because it adds to |
| # ALL_DEFAULT_INSTALLED_MODULES, which those use to pick which files |
| # go into the systemimage. |
| |
| .PHONY: notice_files |
| |
| # Create the rule to combine the files into text and html/xml forms |
| # $(1) - xml_excluded_vendor|xml_vendor|html |
| # $(2) - Plain text output file |
| # $(3) - HTML/XML output file |
| # $(4) - File title |
| # $(5) - Directory to use. Notice files are all $(4)/src. Other |
| # directories in there will be used for scratch |
| # $(6) - Dependencies for the output files |
| # |
| # The algorithm here is that we go collect a hash for each of the notice |
| # files and write the names of the files that match that hash. Then |
| # to generate the real files, we go print out all of the files and their |
| # hashes. |
| # |
| # These rules are fairly complex, so they depend on this makefile so if |
| # it changes, they'll run again. |
| # |
| # TODO: We could clean this up so that we just record the locations of the |
| # original notice files instead of making rules to copy them somwehere. |
| # Then we could traverse that without quite as much bash drama. |
| define combine-notice-files |
| $(2) $(3): PRIVATE_MESSAGE := $(4) |
| $(2) $(3): PRIVATE_DIR := $(5) |
| $(2) : $(3) |
| $(3) : $(6) $(BUILD_SYSTEM)/Makefile build/tools/generate-notice-files.py |
| build/tools/generate-notice-files.py --text-output $(2) \ |
| $(if $(filter $(1),xml_excluded_vendor),-e vendor --xml-output, \ |
| $(if $(filter $(1),xml_vendor),-i vendor --xml-output, \ |
| --html-output)) $(3) \ |
| -t $$(PRIVATE_MESSAGE) -s $$(PRIVATE_DIR)/src |
| notice_files: $(2) $(3) |
| endef |
| |
| # TODO These intermediate NOTICE.txt/NOTICE.html files should go into |
| # TARGET_OUT_NOTICE_FILES now that the notice files are gathered from |
| # the src subdirectory. |
| |
| target_notice_file_txt := $(TARGET_OUT_INTERMEDIATES)/NOTICE.txt |
| target_notice_file_html_or_xml := $(TARGET_OUT_INTERMEDIATES)/NOTICE.html |
| target_notice_file_html_or_xml_gz := $(TARGET_OUT_INTERMEDIATES)/NOTICE.html.gz |
| installed_notice_html_or_xml_gz := $(TARGET_OUT)/etc/NOTICE.html.gz |
| tools_notice_file_txt := $(HOST_OUT_INTERMEDIATES)/NOTICE.txt |
| tools_notice_file_html := $(HOST_OUT_INTERMEDIATES)/NOTICE.html |
| |
| ifeq ($(PRODUCT_FULL_TREBLE),true) |
| target_notice_file_html_or_xml := $(TARGET_OUT_INTERMEDIATES)/NOTICE.xml |
| target_notice_file_html_or_xml_gz := $(TARGET_OUT_INTERMEDIATES)/NOTICE.xml.gz |
| installed_notice_html_or_xml_gz := $(TARGET_OUT)/etc/NOTICE.xml.gz |
| |
| target_vendor_notice_file_txt := $(TARGET_OUT_INTERMEDIATES)/NOTICE_VENDOR.txt |
| target_vendor_notice_file_xml := $(TARGET_OUT_INTERMEDIATES)/NOTICE_VENDOR.xml |
| target_vendor_notice_file_xml_gz := $(TARGET_OUT_INTERMEDIATES)/NOTICE_VENDOR.xml.gz |
| installed_vendor_notice_xml_gz := $(TARGET_OUT_VENDOR)/etc/NOTICE.xml.gz |
| endif |
| |
| ifndef TARGET_BUILD_APPS |
| kernel_notice_file := $(TARGET_OUT_NOTICE_FILES)/src/kernel.txt |
| winpthreads_notice_file := $(TARGET_OUT_NOTICE_FILES)/src/winpthreads.txt |
| pdk_fusion_notice_files := $(filter $(TARGET_OUT_NOTICE_FILES)/%, $(ALL_PDK_FUSION_FILES)) |
| |
| ifdef target_vendor_notice_file_xml_gz |
| $(eval $(call combine-notice-files, xml_excluded_vendor, \ |
| $(target_notice_file_txt), \ |
| $(target_notice_file_html_or_xml), \ |
| "Notices for files contained in the filesystem images in this directory:", \ |
| $(TARGET_OUT_NOTICE_FILES), \ |
| $(ALL_DEFAULT_INSTALLED_MODULES) $(kernel_notice_file) $(pdk_fusion_notice_files))) |
| $(eval $(call combine-notice-files, xml_vendor, \ |
| $(target_vendor_notice_file_txt), \ |
| $(target_vendor_notice_file_xml), \ |
| "Notices for files contained in the vendor filesystem image in this directory:", \ |
| $(TARGET_OUT_NOTICE_FILES), \ |
| $(target_notice_file_html_or_xml))) |
| else |
| $(eval $(call combine-notice-files, html, \ |
| $(target_notice_file_txt), \ |
| $(target_notice_file_html_or_xml), \ |
| "Notices for files contained in the filesystem images in this directory:", \ |
| $(TARGET_OUT_NOTICE_FILES), \ |
| $(ALL_DEFAULT_INSTALLED_MODULES) $(kernel_notice_file) $(pdk_fusion_notice_files))) |
| endif |
| |
| $(eval $(call combine-notice-files, html, \ |
| $(tools_notice_file_txt), \ |
| $(tools_notice_file_html), \ |
| "Notices for files contained in the tools directory:", \ |
| $(HOST_OUT_NOTICE_FILES), \ |
| $(ALL_DEFAULT_INSTALLED_MODULES) \ |
| $(winpthreads_notice_file))) |
| |
| # Install the html file at /system/etc/NOTICE.html.gz. |
| # This is not ideal, but this is very late in the game, after a lot of |
| # the module processing has already been done -- in fact, we used the |
| # fact that all that has been done to get the list of modules that we |
| # need notice files for. |
| $(target_notice_file_html_or_xml_gz): $(target_notice_file_html_or_xml) | $(MINIGZIP) |
| $(hide) $(MINIGZIP) -9 < $< > $@ |
| $(installed_notice_html_or_xml_gz): $(target_notice_file_html_or_xml_gz) |
| $(copy-file-to-target) |
| |
| ifdef target_vendor_notice_file_xml_gz |
| # Install the vendor html file at /vendor/etc/NOTICE.xml.gz. |
| $(target_vendor_notice_file_xml_gz): $(target_vendor_notice_file_xml) | $(MINIGZIP) |
| $(hide) $(MINIGZIP) -9 < $< > $@ |
| $(installed_vendor_notice_xml_gz): $(target_vendor_notice_file_xml_gz) |
| $(copy-file-to-target) |
| endif |
| |
| # if we've been run my mm, mmm, etc, don't reinstall this every time |
| ifeq ($(ONE_SHOT_MAKEFILE),) |
| ALL_DEFAULT_INSTALLED_MODULES += $(installed_notice_html_or_xml_gz) |
| ifdef target_vendor_notice_file_xml_gz |
| ALL_DEFAULT_INSTALLED_MODULES += $(installed_vendor_notice_xml_gz) |
| endif |
| endif |
| endif # TARGET_BUILD_APPS |
| |
| # The kernel isn't really a module, so to get its module file in there, we |
| # make the target NOTICE files depend on this particular file too, which will |
| # then be in the right directory for the find in combine-notice-files to work. |
| $(kernel_notice_file): \ |
| $(BUILD_SYSTEM)/LINUX_KERNEL_COPYING \ |
| | $(ACP) |
| @echo Copying: $@ |
| $(hide) mkdir -p $(dir $@) |
| $(hide) $(ACP) $< $@ |
| |
| $(winpthreads_notice_file): \ |
| $(BUILD_SYSTEM)/WINPTHREADS_COPYING \ |
| | $(ACP) |
| @echo Copying: $@ |
| $(hide) mkdir -p $(dir $@) |
| $(hide) $(ACP) $< $@ |
| |
| # ----------------------------------------------------------------- |
| # Build a keystore with the authorized keys in it, used to verify the |
| # authenticity of downloaded OTA packages. |
| # |
| # This rule adds to ALL_DEFAULT_INSTALLED_MODULES, so it needs to come |
| # before the rules that use that variable to build the image. |
| ALL_DEFAULT_INSTALLED_MODULES += $(TARGET_OUT_ETC)/security/otacerts.zip |
| $(TARGET_OUT_ETC)/security/otacerts.zip: KEY_CERT_PAIR := $(DEFAULT_KEY_CERT_PAIR) |
| $(TARGET_OUT_ETC)/security/otacerts.zip: $(addsuffix .x509.pem,$(DEFAULT_KEY_CERT_PAIR)) | $(ZIPTIME) |
| $(hide) rm -f $@ |
| $(hide) mkdir -p $(dir $@) |
| $(hide) zip -qjX $@ $< |
| $(remove-timestamps-from-package) |
| |
| # Carry the public key for update_engine if it's a non-IoT target that |
| # uses the AB updater. We use the same key as otacerts but in RSA public key |
| # format. |
| ifeq ($(AB_OTA_UPDATER),true) |
| ifneq ($(PRODUCT_IOT),true) |
| ALL_DEFAULT_INSTALLED_MODULES += $(TARGET_OUT_ETC)/update_engine/update-payload-key.pub.pem |
| $(TARGET_OUT_ETC)/update_engine/update-payload-key.pub.pem: $(addsuffix .x509.pem,$(DEFAULT_KEY_CERT_PAIR)) |
| $(hide) rm -f $@ |
| $(hide) mkdir -p $(dir $@) |
| $(hide) openssl x509 -pubkey -noout -in $< > $@ |
| |
| ALL_DEFAULT_INSTALLED_MODULES += $(TARGET_RECOVERY_ROOT_OUT)/etc/update_engine/update-payload-key.pub.pem |
| $(TARGET_RECOVERY_ROOT_OUT)/etc/update_engine/update-payload-key.pub.pem: $(TARGET_OUT_ETC)/update_engine/update-payload-key.pub.pem |
| $(hide) cp -f $< $@ |
| endif |
| endif |
| |
| .PHONY: otacerts |
| otacerts: $(TARGET_OUT_ETC)/security/otacerts.zip |
| |
| |
| # ################################################################# |
| # Targets for user images |
| # ################################################################# |
| |
| INTERNAL_USERIMAGES_EXT_VARIANT := |
| ifeq ($(TARGET_USERIMAGES_USE_EXT2),true) |
| INTERNAL_USERIMAGES_USE_EXT := true |
| INTERNAL_USERIMAGES_EXT_VARIANT := ext2 |
| else |
| ifeq ($(TARGET_USERIMAGES_USE_EXT3),true) |
| INTERNAL_USERIMAGES_USE_EXT := true |
| INTERNAL_USERIMAGES_EXT_VARIANT := ext3 |
| else |
| ifeq ($(TARGET_USERIMAGES_USE_EXT4),true) |
| INTERNAL_USERIMAGES_USE_EXT := true |
| INTERNAL_USERIMAGES_EXT_VARIANT := ext4 |
| endif |
| endif |
| endif |
| |
| # These options tell the recovery updater/installer how to mount the partitions writebale. |
| # <fstype>=<fstype_opts>[|<fstype_opts>]... |
| # fstype_opts := <opt>[,<opt>]... |
| # opt := <name>[=<value>] |
| # The following worked on Nexus devices with Kernel 3.1, 3.4, 3.10 |
| DEFAULT_TARGET_RECOVERY_FSTYPE_MOUNT_OPTIONS := ext4=max_batch_time=0,commit=1,data=ordered,barrier=1,errors=panic,nodelalloc |
| |
| ifneq (true,$(TARGET_USERIMAGES_SPARSE_EXT_DISABLED)) |
| INTERNAL_USERIMAGES_SPARSE_EXT_FLAG := -s |
| endif |
| |
| ifeq ($(INTERNAL_USERIMAGES_USE_EXT),true) |
| INTERNAL_USERIMAGES_DEPS := $(SIMG2IMG) |
| INTERNAL_USERIMAGES_DEPS += $(MKEXTUSERIMG) $(MAKE_EXT4FS) $(E2FSCK) |
| ifeq ($(TARGET_USERIMAGES_USE_F2FS),true) |
| INTERNAL_USERIMAGES_DEPS += $(MKF2FSUSERIMG) $(MAKE_F2FS) |
| endif |
| endif |
| |
| ifeq ($(BOARD_AVB_ENABLE),true) |
| INTERNAL_USERIMAGES_DEPS += $(AVBTOOL) |
| endif |
| |
| ifneq (true,$(TARGET_USERIMAGES_SPARSE_SQUASHFS_DISABLED)) |
| INTERNAL_USERIMAGES_SPARSE_SQUASHFS_FLAG := -s |
| endif |
| ifneq ($(filter $(BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE) $(BOARD_SYSTEMIMAGE_FILE_SYSTEM_TYPE),squashfs),) |
| INTERNAL_USERIMAGES_DEPS += $(MAKE_SQUASHFS) $(MKSQUASHFSUSERIMG) $(IMG2SIMG) |
| endif |
| |
| INTERNAL_USERIMAGES_BINARY_PATHS := $(sort $(dir $(INTERNAL_USERIMAGES_DEPS))) |
| |
| ifeq (true,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY)) |
| INTERNAL_USERIMAGES_DEPS += $(BUILD_VERITY_TREE) $(APPEND2SIMG) $(VERITY_SIGNER) |
| ifeq (true,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY_FEC)) |
| INTERNAL_USERIMAGES_DEPS += $(FEC) |
| endif |
| endif |
| |
| SELINUX_FC := $(call intermediates-dir-for,ETC,file_contexts.bin)/file_contexts.bin |
| INTERNAL_USERIMAGES_DEPS += $(SELINUX_FC) |
| |
| INTERNAL_USERIMAGES_DEPS += $(BLK_ALLOC_TO_BASE_FS) |
| |
| ifeq ($(INTERNAL_USERIMAGES_USE_EXT),true) |
| INTERNAL_USERIMAGES_DEPS += $(MKE2FS_CONF) |
| endif |
| |
| # $(1): the path of the output dictionary file |
| # $(2): additional "key=value" pairs to append to the dictionary file. |
| define generate-userimage-prop-dictionary |
| $(hide) echo "ext_mkuserimg=$(notdir $(MKEXTUSERIMG))" >> $(1) |
| $(if $(INTERNAL_USERIMAGES_EXT_VARIANT),$(hide) echo "fs_type=$(INTERNAL_USERIMAGES_EXT_VARIANT)" >> $(1)) |
| $(if $(BOARD_SYSTEMIMAGE_PARTITION_SIZE),$(hide) echo "system_size=$(BOARD_SYSTEMIMAGE_PARTITION_SIZE)" >> $(1)) |
| $(if $(BOARD_SYSTEMIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "system_fs_type=$(BOARD_SYSTEMIMAGE_FILE_SYSTEM_TYPE)" >> $(1)) |
| $(if $(BOARD_SYSTEMIMAGE_EXTFS_INODE_COUNT),$(hide) echo "system_extfs_inode_count=$(BOARD_SYSTEMIMAGE_EXTFS_INODE_COUNT)" >> $(1)) |
| $(if $(BOARD_SYSTEMIMAGE_JOURNAL_SIZE),$(hide) echo "system_journal_size=$(BOARD_SYSTEMIMAGE_JOURNAL_SIZE)" >> $(1)) |
| $(if $(BOARD_HAS_EXT4_RESERVED_BLOCKS),$(hide) echo "has_ext4_reserved_blocks=$(BOARD_HAS_EXT4_RESERVED_BLOCKS)" >> $(1)) |
| $(if $(BOARD_SYSTEMIMAGE_SQUASHFS_COMPRESSOR),$(hide) echo "system_squashfs_compressor=$(BOARD_SYSTEMIMAGE_SQUASHFS_COMPRESSOR)" >> $(1)) |
| $(if $(BOARD_SYSTEMIMAGE_SQUASHFS_COMPRESSOR_OPT),$(hide) echo "system_squashfs_compressor_opt=$(BOARD_SYSTEMIMAGE_SQUASHFS_COMPRESSOR_OPT)" >> $(1)) |
| $(if $(BOARD_SYSTEMIMAGE_SQUASHFS_BLOCK_SIZE),$(hide) echo "system_squashfs_block_size=$(BOARD_SYSTEMIMAGE_SQUASHFS_BLOCK_SIZE)" >> $(1)) |
| $(if $(BOARD_SYSTEMIMAGE_SQUASHFS_DISABLE_4K_ALIGN),$(hide) echo "system_squashfs_disable_4k_align=$(BOARD_SYSTEMIMAGE_SQUASHFS_DISABLE_4K_ALIGN)" >> $(1)) |
| $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_BASE_FS_PATH),$(hide) echo "system_base_fs_file=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_BASE_FS_PATH)" >> $(1)) |
| $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_HEADROOM),$(hide) echo "system_headroom=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_HEADROOM)" >> $(1)) |
| $(if $(BOARD_USERDATAIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "userdata_fs_type=$(BOARD_USERDATAIMAGE_FILE_SYSTEM_TYPE)" >> $(1)) |
| $(if $(BOARD_USERDATAIMAGE_PARTITION_SIZE),$(hide) echo "userdata_size=$(BOARD_USERDATAIMAGE_PARTITION_SIZE)" >> $(1)) |
| $(if $(BOARD_FLASH_LOGICAL_BLOCK_SIZE), $(hide) echo "flash_logical_block_size=$(BOARD_FLASH_LOGICAL_BLOCK_SIZE)" >> $(1)) |
| $(if $(BOARD_FLASH_ERASE_BLOCK_SIZE), $(hide) echo "flash_erase_block_size=$(BOARD_FLASH_ERASE_BLOCK_SIZE)" >> $(1)) |
| $(if $(BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "cache_fs_type=$(BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE)" >> $(1)) |
| $(if $(BOARD_CACHEIMAGE_PARTITION_SIZE),$(hide) echo "cache_size=$(BOARD_CACHEIMAGE_PARTITION_SIZE)" >> $(1)) |
| $(if $(BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "vendor_fs_type=$(BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE)" >> $(1)) |
| $(if $(BOARD_VENDORIMAGE_EXTFS_INODE_COUNT),$(hide) echo "vendor_extfs_inode_count=$(BOARD_VENDORIMAGE_EXTFS_INODE_COUNT)" >> $(1)) |
| $(if $(BOARD_VENDORIMAGE_PARTITION_SIZE),$(hide) echo "vendor_size=$(BOARD_VENDORIMAGE_PARTITION_SIZE)" >> $(1)) |
| $(if $(BOARD_VENDORIMAGE_JOURNAL_SIZE),$(hide) echo "vendor_journal_size=$(BOARD_VENDORIMAGE_JOURNAL_SIZE)" >> $(1)) |
| $(if $(BOARD_VENDORIMAGE_SQUASHFS_COMPRESSOR),$(hide) echo "vendor_squashfs_compressor=$(BOARD_VENDORIMAGE_SQUASHFS_COMPRESSOR)" >> $(1)) |
| $(if $(BOARD_VENDORIMAGE_SQUASHFS_COMPRESSOR_OPT),$(hide) echo "vendor_squashfs_compressor_opt=$(BOARD_VENDORIMAGE_SQUASHFS_COMPRESSOR_OPT)" >> $(1)) |
| $(if $(BOARD_VENDORIMAGE_SQUASHFS_BLOCK_SIZE),$(hide) echo "vendor_squashfs_block_size=$(BOARD_VENDORIMAGE_SQUASHFS_BLOCK_SIZE)" >> $(1)) |
| $(if $(BOARD_VENDORIMAGE_SQUASHFS_DISABLE_4K_ALIGN),$(hide) echo "vendor_squashfs_disable_4k_align=$(BOARD_VENDORIMAGE_SQUASHFS_DISABLE_4K_ALIGN)" >> $(1)) |
| $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VENDOR_BASE_FS_PATH),$(hide) echo "vendor_base_fs_file=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VENDOR_BASE_FS_PATH)" >> $(1)) |
| $(if $(BOARD_OEMIMAGE_PARTITION_SIZE),$(hide) echo "oem_size=$(BOARD_OEMIMAGE_PARTITION_SIZE)" >> $(1)) |
| $(if $(BOARD_OEMIMAGE_JOURNAL_SIZE),$(hide) echo "oem_journal_size=$(BOARD_OEMIMAGE_JOURNAL_SIZE)" >> $(1)) |
| $(if $(BOARD_OEMIMAGE_EXTFS_INODE_COUNT),$(hide) echo "oem_extfs_inode_count=$(BOARD_OEMIMAGE_EXTFS_INODE_COUNT)" >> $(1)) |
| $(if $(INTERNAL_USERIMAGES_SPARSE_EXT_FLAG),$(hide) echo "extfs_sparse_flag=$(INTERNAL_USERIMAGES_SPARSE_EXT_FLAG)" >> $(1)) |
| $(if $(INTERNAL_USERIMAGES_SPARSE_SQUASHFS_FLAG),$(hide) echo "squashfs_sparse_flag=$(INTERNAL_USERIMAGES_SPARSE_SQUASHFS_FLAG)" >> $(1)) |
| $(hide) echo "selinux_fc=$(SELINUX_FC)" >> $(1) |
| $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_BOOT_SIGNER),$(hide) echo "boot_signer=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_BOOT_SIGNER)" >> $(1)) |
| $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY),$(hide) echo "verity=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY)" >> $(1)) |
| $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY),$(hide) echo "verity_key=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VERITY_SIGNING_KEY)" >> $(1)) |
| $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY),$(hide) echo "verity_signer_cmd=$(notdir $(VERITY_SIGNER))" >> $(1)) |
| $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY_FEC),$(hide) echo "verity_fec=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY_FEC)" >> $(1)) |
| $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_VERITY_PARTITION),$(hide) echo "system_verity_block_device=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_VERITY_PARTITION)" >> $(1)) |
| $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VENDOR_VERITY_PARTITION),$(hide) echo "vendor_verity_block_device=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VENDOR_VERITY_PARTITION)" >> $(1)) |
| $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VBOOT),$(hide) echo "vboot=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VBOOT)" >> $(1)) |
| $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VBOOT),$(hide) echo "vboot_key=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VBOOT_SIGNING_KEY)" >> $(1)) |
| $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VBOOT),$(hide) echo "vboot_subkey=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VBOOT_SIGNING_SUBKEY)" >> $(1)) |
| $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VBOOT),$(hide) echo "futility=$(notdir $(FUTILITY))" >> $(1)) |
| $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VBOOT),$(hide) echo "vboot_signer_cmd=$(VBOOT_SIGNER)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_avbtool=$(notdir $(AVBTOOL))" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_system_hashtree_enable=$(BOARD_AVB_ENABLE)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_system_add_hashtree_footer_args=$(BOARD_AVB_SYSTEM_ADD_HASHTREE_FOOTER_ARGS)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),\ |
| $(if $(BOARD_AVB_SYSTEM_KEY_PATH),\ |
| $(hide) echo "avb_system_key_path=$(BOARD_AVB_SYSTEM_KEY_PATH)" >> $(1) |
| $(hide) echo "avb_system_algorithm=$(BOARD_AVB_SYSTEM_ALGORITHM)" >> $(1) |
| $(hide) echo "avb_system_rollback_index_location=$(BOARD_AVB_SYSTEM_ROLLBACK_INDEX_LOCATION)" >> $(1))) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_vendor_hashtree_enable=$(BOARD_AVB_ENABLE)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_vendor_add_hashtree_footer_args=$(BOARD_AVB_VENDOR_ADD_HASHTREE_FOOTER_ARGS)" >> $(1)) |
| $(if $(BOARD_AVB_ENABLE),\ |
| $(if $(BOARD_AVB_VENDOR_KEY_PATH),\ |
| $(hide) echo "avb_vendor_key_path=$(BOARD_AVB_VENDOR_KEY_PATH)" >> $(1) |
| $(hide) echo "avb_vendor_algorithm=$(BOARD_AVB_VENDOR_ALGORITHM)" >> $(1) |
| $(hide) echo "avb_vendor_rollback_index_location=$(BOARD_AVB_VENDOR_ROLLBACK_INDEX_LOCATION)" >> $(1))) |
| $(if $(filter true,$(BOARD_USES_RECOVERY_AS_BOOT)),\ |
| $(hide) echo "recovery_as_boot=true" >> $(1)) |
| $(if $(filter true,$(BOARD_BUILD_SYSTEM_ROOT_IMAGE)),\ |
| $(hide) echo "system_root_image=true" >> $(1);\ |
| echo "ramdisk_dir=$(TARGET_ROOT_OUT)" >> $(1)) |
| $(if $(2),$(hide) $(foreach kv,$(2),echo "$(kv)" >> $(1);)) |
| endef |
| |
| # ----------------------------------------------------------------- |
| # Recovery image |
| |
| # Recovery image exists if we are building recovery, or building recovery as boot. |
| ifneq (,$(INSTALLED_RECOVERYIMAGE_TARGET)$(filter true,$(BOARD_USES_RECOVERY_AS_BOOT))) |
| |
| INTERNAL_RECOVERYIMAGE_FILES := $(filter $(TARGET_RECOVERY_OUT)/%, \ |
| $(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| recovery_initrc := $(call include-path-for, recovery)/etc/init.rc |
| recovery_sepolicy := \ |
| $(TARGET_RECOVERY_ROOT_OUT)/sepolicy \ |
| $(TARGET_RECOVERY_ROOT_OUT)/file_contexts.bin \ |
| $(TARGET_RECOVERY_ROOT_OUT)/plat_property_contexts \ |
| $(TARGET_RECOVERY_ROOT_OUT)/nonplat_property_contexts |
| # Passed into rsync from non-recovery root to recovery root, to avoid overwriting recovery-specific |
| # SELinux files |
| IGNORE_RECOVERY_SEPOLICY := $(patsubst $(TARGET_RECOVERY_OUT)/%,--exclude=/%,$(recovery_sepolicy)) |
| |
| recovery_kernel := $(INSTALLED_KERNEL_TARGET) # same as a non-recovery system |
| recovery_ramdisk := $(PRODUCT_OUT)/ramdisk-recovery.img |
| recovery_build_prop := $(intermediate_system_build_prop) |
| recovery_resources_common := $(call include-path-for, recovery)/res |
| |
| # Set recovery_density to the density bucket of the device. |
| recovery_density := unknown |
| ifneq (,$(PRODUCT_AAPT_PREF_CONFIG)) |
| # If PRODUCT_AAPT_PREF_CONFIG includes a dpi bucket, then use that value. |
| recovery_density := $(filter %dpi,$(PRODUCT_AAPT_PREF_CONFIG)) |
| else |
| # Otherwise, use the default medium density. |
| recovery_densities := mdpi |
| endif |
| |
| ifneq (,$(wildcard $(recovery_resources_common)-$(recovery_density))) |
| recovery_resources_common := $(recovery_resources_common)-$(recovery_density) |
| else |
| recovery_resources_common := $(recovery_resources_common)-xhdpi |
| endif |
| |
| # Select the 18x32 font on high-density devices (xhdpi and up); and |
| # the 12x22 font on other devices. Note that the font selected here |
| # can be overridden for a particular device by putting a font.png in |
| # its private recovery resources. |
| |
| ifneq (,$(filter xxxhdpi 560dpi xxhdpi 400dpi xhdpi,$(recovery_density))) |
| recovery_font := $(call include-path-for, recovery)/fonts/18x32.png |
| else |
| recovery_font := $(call include-path-for, recovery)/fonts/12x22.png |
| endif |
| |
| ifndef TARGET_PRIVATE_RES_DIRS |
| TARGET_PRIVATE_RES_DIRS := $(wildcard $(TARGET_DEVICE_DIR)/recovery/res) |
| endif |
| recovery_resource_deps := $(shell find $(recovery_resources_common) \ |
| $(TARGET_PRIVATE_RES_DIRS) -type f) |
| ifdef TARGET_RECOVERY_FSTAB |
| recovery_fstab := $(TARGET_RECOVERY_FSTAB) |
| else |
| recovery_fstab := $(strip $(wildcard $(TARGET_DEVICE_DIR)/recovery.fstab)) |
| endif |
| ifdef TARGET_RECOVERY_WIPE |
| recovery_wipe := $(TARGET_RECOVERY_WIPE) |
| else |
| recovery_wipe := |
| endif |
| |
| # Prior to A/B update, we used to have: |
| # boot.img + recovery-from-boot.p + recovery-resource.dat = recovery.img. |
| # recovery-resource.dat is needed only if we carry a patch of the boot and |
| # recovery images and invoke install-recovery.sh on the first boot post an |
| # OTA update. |
| # |
| # We no longer need that if one of the following conditions holds: |
| # a) We carry a full copy of the recovery image |
| # (BOARD_USES_FULL_RECOVERY_IMAGE = true); |
| # b) We build a single image that contains boot and recovery both |
| # (BOARD_USES_RECOVERY_AS_BOOT = true). |
| |
| ifeq (,$(filter true, $(BOARD_USES_FULL_RECOVERY_IMAGE) $(BOARD_USES_RECOVERY_AS_BOOT))) |
| # Named '.dat' so we don't attempt to use imgdiff for patching it. |
| RECOVERY_RESOURCE_ZIP := $(TARGET_OUT)/etc/recovery-resource.dat |
| else |
| RECOVERY_RESOURCE_ZIP := |
| endif |
| |
| ifeq ($(TARGET_PRIVATE_RES_DIRS),) |
| $(info No private recovery resources for TARGET_DEVICE $(TARGET_DEVICE)) |
| endif |
| |
| ifeq ($(recovery_fstab),) |
| $(info No recovery.fstab for TARGET_DEVICE $(TARGET_DEVICE)) |
| endif |
| |
| INTERNAL_RECOVERYIMAGE_ARGS := \ |
| $(addprefix --second ,$(INSTALLED_2NDBOOTLOADER_TARGET)) \ |
| --kernel $(recovery_kernel) \ |
| --ramdisk $(recovery_ramdisk) |
| |
| # Assumes this has already been stripped |
| ifdef INTERNAL_KERNEL_CMDLINE |
| INTERNAL_RECOVERYIMAGE_ARGS += --cmdline "$(INTERNAL_KERNEL_CMDLINE)" |
| endif |
| ifdef BOARD_KERNEL_BASE |
| INTERNAL_RECOVERYIMAGE_ARGS += --base $(BOARD_KERNEL_BASE) |
| endif |
| ifdef BOARD_KERNEL_PAGESIZE |
| INTERNAL_RECOVERYIMAGE_ARGS += --pagesize $(BOARD_KERNEL_PAGESIZE) |
| endif |
| |
| # Keys authorized to sign OTA packages this build will accept. The |
| # build always uses dev-keys for this; release packaging tools will |
| # substitute other keys for this one. |
| OTA_PUBLIC_KEYS := $(DEFAULT_SYSTEM_DEV_CERTIFICATE).x509.pem |
| |
| # Generate a file containing the keys that will be read by the |
| # recovery binary. |
| RECOVERY_INSTALL_OTA_KEYS := \ |
| $(call intermediates-dir-for,PACKAGING,ota_keys)/keys |
| DUMPKEY_JAR := $(HOST_OUT_JAVA_LIBRARIES)/dumpkey.jar |
| $(RECOVERY_INSTALL_OTA_KEYS): PRIVATE_OTA_PUBLIC_KEYS := $(OTA_PUBLIC_KEYS) |
| $(RECOVERY_INSTALL_OTA_KEYS): extra_keys := $(patsubst %,%.x509.pem,$(PRODUCT_EXTRA_RECOVERY_KEYS)) |
| $(RECOVERY_INSTALL_OTA_KEYS): $(OTA_PUBLIC_KEYS) $(DUMPKEY_JAR) $(extra_keys) |
| @echo "DumpPublicKey: $@ <= $(PRIVATE_OTA_PUBLIC_KEYS) $(extra_keys)" |
| @rm -rf $@ |
| @mkdir -p $(dir $@) |
| $(JAVA) -jar $(DUMPKEY_JAR) $(PRIVATE_OTA_PUBLIC_KEYS) $(extra_keys) > $@ |
| |
| RECOVERYIMAGE_ID_FILE := $(PRODUCT_OUT)/recovery.id |
| |
| # $(1): modules list |
| # $(2): output dir |
| # $(3): mount point |
| # $(4): staging dir |
| # Depmod requires a well-formed kernel version so 0.0 is used as a placeholder. |
| define build-image-kernel-modules |
| $(hide) rm -rf $(2)/lib/modules |
| $(hide) mkdir -p $(2)/lib/modules |
| $(hide) cp $(1) $(2)/lib/modules/ |
| $(hide) rm -rf $(4) |
| $(hide) mkdir -p $(4)/lib/modules/0.0/$(3)lib/modules |
| $(hide) cp $(1) $(4)/lib/modules/0.0/$(3)lib/modules |
| $(hide) $(DEPMOD) -b $(4) 0.0 |
| $(hide) sed -e 's/\(.*modules.*\):/\/\1:/g' -e 's/ \([^ ]*modules[^ ]*\)/ \/\1/g' $(4)/lib/modules/0.0/modules.dep > $(2)/lib/modules/modules.dep |
| $(hide) cp $(4)/lib/modules/0.0/modules.alias $(2)/lib/modules |
| endef |
| |
| # $(1): output file |
| define build-recoveryimage-target |
| @echo ----- Making recovery image ------ |
| $(hide) mkdir -p $(TARGET_RECOVERY_OUT) |
| $(hide) mkdir -p $(TARGET_RECOVERY_ROOT_OUT)/etc $(TARGET_RECOVERY_ROOT_OUT)/sdcard $(TARGET_RECOVERY_ROOT_OUT)/tmp |
| @echo Copying baseline ramdisk... |
| # Use rsync because "cp -Rf" fails to overwrite broken symlinks on Mac. |
| $(hide) rsync -a --exclude=etc --exclude=sdcard $(IGNORE_RECOVERY_SEPOLICY) $(IGNORE_CACHE_LINK) $(TARGET_ROOT_OUT) $(TARGET_RECOVERY_OUT) |
| @echo Modifying ramdisk contents... |
| $(if $(BOARD_RECOVERY_KERNEL_MODULES), \ |
| $(call build-image-kernel-modules,$(BOARD_RECOVERY_KERNEL_MODULES),$(TARGET_RECOVERY_ROOT_OUT),,$(call intermediates-dir-for,PACKAGING,depmod_recovery))) |
| $(hide) rm -f $(TARGET_RECOVERY_ROOT_OUT)/init*.rc |
| $(hide) cp -f $(recovery_initrc) $(TARGET_RECOVERY_ROOT_OUT)/ |
| $(hide) cp $(TARGET_ROOT_OUT)/init.recovery.*.rc $(TARGET_RECOVERY_ROOT_OUT)/ || true # Ignore error when the src file doesn't exist. |
| $(hide) mkdir -p $(TARGET_RECOVERY_ROOT_OUT)/res |
| $(hide) rm -rf $(TARGET_RECOVERY_ROOT_OUT)/res/* |
| $(hide) cp -rf $(recovery_resources_common)/* $(TARGET_RECOVERY_ROOT_OUT)/res |
| $(hide) cp -f $(recovery_font) $(TARGET_RECOVERY_ROOT_OUT)/res/images/font.png |
| $(hide) $(foreach item,$(TARGET_PRIVATE_RES_DIRS), \ |
| cp -rf $(item) $(TARGET_RECOVERY_ROOT_OUT)/$(newline)) |
| $(hide) $(foreach item,$(recovery_fstab), \ |
| cp -f $(item) $(TARGET_RECOVERY_ROOT_OUT)/etc/recovery.fstab) |
| $(if $(strip $(recovery_wipe)), \ |
| $(hide) cp -f $(recovery_wipe) $(TARGET_RECOVERY_ROOT_OUT)/etc/recovery.wipe) |
| $(hide) cp $(RECOVERY_INSTALL_OTA_KEYS) $(TARGET_RECOVERY_ROOT_OUT)/res/keys |
| $(hide) cat $(INSTALLED_DEFAULT_PROP_TARGET) $(recovery_build_prop) \ |
| > $(TARGET_RECOVERY_ROOT_OUT)/default.prop |
| $(BOARD_RECOVERY_IMAGE_PREPARE) |
| $(if $(filter true,$(BOARD_BUILD_SYSTEM_ROOT_IMAGE)), \ |
| $(hide) mkdir -p $(TARGET_RECOVERY_ROOT_OUT)/system_root; \ |
| rm -rf $(TARGET_RECOVERY_ROOT_OUT)/system; \ |
| ln -sf /system_root/system $(TARGET_RECOVERY_ROOT_OUT)/system) # Mount the system_root_image to /system_root and symlink /system. |
| $(hide) $(MKBOOTFS) -d $(TARGET_OUT) $(TARGET_RECOVERY_ROOT_OUT) | $(MINIGZIP) > $(recovery_ramdisk) |
| $(if $(filter true,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VBOOT)), \ |
| $(hide) $(MKBOOTIMG) $(INTERNAL_RECOVERYIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $(1).unsigned, \ |
| $(hide) $(MKBOOTIMG) $(INTERNAL_RECOVERYIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $(1) --id > $(RECOVERYIMAGE_ID_FILE)) |
| $(if $(filter true,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_BOOT_SIGNER)),\ |
| $(if $(filter true,$(BOARD_USES_RECOVERY_AS_BOOT)),\ |
| $(BOOT_SIGNER) /boot $(1) $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VERITY_SIGNING_KEY).pk8 $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VERITY_SIGNING_KEY).x509.pem $(1),\ |
| $(BOOT_SIGNER) /recovery $(1) $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VERITY_SIGNING_KEY).pk8 $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VERITY_SIGNING_KEY).x509.pem $(1)\ |
| )\ |
| ) |
| $(if $(filter true,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VBOOT)), \ |
| $(VBOOT_SIGNER) $(FUTILITY) $(1).unsigned $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VBOOT_SIGNING_KEY).vbpubk $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VBOOT_SIGNING_KEY).vbprivk $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VBOOT_SIGNING_SUBKEY).vbprivk $(1).keyblock $(1)) |
| $(if $(and $(filter true,$(BOARD_USES_RECOVERY_AS_BOOT)),$(filter true,$(BOARD_AVB_ENABLE))), \ |
| $(hide) $(AVBTOOL) add_hash_footer \ |
| --image $(1) \ |
| --partition_size $(BOARD_BOOTIMAGE_PARTITION_SIZE) \ |
| --partition_name boot $(INTERNAL_AVB_BOOT_SIGNING_ARGS) \ |
| $(BOARD_AVB_BOOT_ADD_HASH_FOOTER_ARGS)) |
| $(if $(filter true,$(BOARD_USES_RECOVERY_AS_BOOT)), \ |
| $(hide) $(call assert-max-image-size,$(1),$(BOARD_BOOTIMAGE_PARTITION_SIZE)), \ |
| $(hide) $(call assert-max-image-size,$(1),$(BOARD_RECOVERYIMAGE_PARTITION_SIZE))) |
| @echo ----- Made recovery image: $(1) -------- |
| endef |
| |
| ifeq ($(BOARD_USES_RECOVERY_AS_BOOT),true) |
| ifeq (true,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_BOOT_SIGNER)) |
| $(INSTALLED_BOOTIMAGE_TARGET) : $(BOOT_SIGNER) |
| endif |
| ifeq (true,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VBOOT)) |
| $(INSTALLED_BOOTIMAGE_TARGET) : $(VBOOT_SIGNER) |
| endif |
| ifeq (true,$(BOARD_AVB_ENABLE)) |
| $(INSTALLED_BOOTIMAGE_TARGET) : $(AVBTOOL) $(BOARD_AVB_BOOT_KEY_PATH) |
| endif |
| $(INSTALLED_BOOTIMAGE_TARGET): $(MKBOOTFS) $(MKBOOTIMG) $(MINIGZIP) \ |
| $(INSTALLED_RAMDISK_TARGET) \ |
| $(INTERNAL_RECOVERYIMAGE_FILES) \ |
| $(recovery_initrc) $(recovery_sepolicy) $(recovery_kernel) \ |
| $(INSTALLED_2NDBOOTLOADER_TARGET) \ |
| $(recovery_build_prop) $(recovery_resource_deps) \ |
| $(recovery_fstab) \ |
| $(RECOVERY_INSTALL_OTA_KEYS) \ |
| $(BOARD_RECOVERY_KERNEL_MODULES) \ |
| $(DEPMOD) |
| $(call pretty,"Target boot image from recovery: $@") |
| $(call build-recoveryimage-target, $@) |
| endif |
| |
| $(INSTALLED_RECOVERYIMAGE_TARGET): $(MKBOOTFS) $(MKBOOTIMG) $(MINIGZIP) \ |
| $(INSTALLED_RAMDISK_TARGET) \ |
| $(INSTALLED_BOOTIMAGE_TARGET) \ |
| $(INTERNAL_RECOVERYIMAGE_FILES) \ |
| $(recovery_initrc) $(recovery_sepolicy) $(recovery_kernel) \ |
| $(INSTALLED_2NDBOOTLOADER_TARGET) \ |
| $(recovery_build_prop) $(recovery_resource_deps) \ |
| $(recovery_fstab) \ |
| $(RECOVERY_INSTALL_OTA_KEYS) \ |
| $(BOARD_RECOVERY_KERNEL_MODULES) \ |
| $(DEPMOD) |
| $(call build-recoveryimage-target, $@) |
| |
| ifdef RECOVERY_RESOURCE_ZIP |
| $(RECOVERY_RESOURCE_ZIP): $(INSTALLED_RECOVERYIMAGE_TARGET) | $(ZIPTIME) |
| $(hide) mkdir -p $(dir $@) |
| $(hide) find $(TARGET_RECOVERY_ROOT_OUT)/res -type f | sort | zip -0qrjX $@ -@ |
| $(remove-timestamps-from-package) |
| endif |
| |
| .PHONY: recoveryimage-nodeps |
| recoveryimage-nodeps: |
| @echo "make $@: ignoring dependencies" |
| $(call build-recoveryimage-target, $(INSTALLED_RECOVERYIMAGE_TARGET)) |
| |
| else # INSTALLED_RECOVERYIMAGE_TARGET not defined |
| RECOVERY_RESOURCE_ZIP := |
| endif |
| |
| .PHONY: recoveryimage |
| recoveryimage: $(INSTALLED_RECOVERYIMAGE_TARGET) $(RECOVERY_RESOURCE_ZIP) |
| |
| ifeq ($(BOARD_NAND_PAGE_SIZE),) |
| BOARD_NAND_PAGE_SIZE := 2048 |
| endif |
| |
| ifeq ($(BOARD_NAND_SPARE_SIZE),) |
| BOARD_NAND_SPARE_SIZE := 64 |
| endif |
| |
| # ----------------------------------------------------------------- |
| # system image |
| # |
| # Remove overridden packages from $(ALL_PDK_FUSION_FILES) |
| PDK_FUSION_SYSIMG_FILES := \ |
| $(filter-out $(foreach p,$(overridden_packages),$(p) %/$(p).apk), \ |
| $(ALL_PDK_FUSION_FILES)) |
| |
| INTERNAL_SYSTEMIMAGE_FILES := $(filter $(TARGET_OUT)/%, \ |
| $(ALL_GENERATED_SOURCES) \ |
| $(ALL_DEFAULT_INSTALLED_MODULES) \ |
| $(PDK_FUSION_SYSIMG_FILES) \ |
| $(RECOVERY_RESOURCE_ZIP)) |
| |
| FULL_SYSTEMIMAGE_DEPS := $(INTERNAL_SYSTEMIMAGE_FILES) $(INTERNAL_USERIMAGES_DEPS) |
| |
| # ASAN libraries in the system image - add dependency. |
| ASAN_IN_SYSTEM_INSTALLED := $(TARGET_OUT)/asan.tar.bz2 |
| ifneq (,$(SANITIZE_TARGET)) |
| ifeq (true,$(SANITIZE_TARGET_SYSTEM)) |
| FULL_SYSTEMIMAGE_DEPS += $(ASAN_IN_SYSTEM_INSTALLED) |
| endif |
| endif |
| |
| # ----------------------------------------------------------------- |
| # installed file list |
| # Depending on anything that $(BUILT_SYSTEMIMAGE) depends on. |
| # We put installed-files.txt ahead of image itself in the dependency graph |
| # so that we can get the size stat even if the build fails due to too large |
| # system image. |
| INSTALLED_FILES_FILE := $(PRODUCT_OUT)/installed-files.txt |
| $(INSTALLED_FILES_FILE): $(FULL_SYSTEMIMAGE_DEPS) $(FILESLIST) |
| @echo Installed file list: $@ |
| @mkdir -p $(dir $@) |
| @rm -f $@ |
| $(hide) $(FILESLIST) $(TARGET_OUT) > $(@:.txt=.json) |
| $(hide) build/tools/fileslist_util.py -c $(@:.txt=.json) > $@ |
| |
| .PHONY: installed-file-list |
| installed-file-list: $(INSTALLED_FILES_FILE) |
| |
| $(call dist-for-goals, sdk win_sdk sdk_addon, $(INSTALLED_FILES_FILE)) |
| |
| systemimage_intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,systemimage) |
| BUILT_SYSTEMIMAGE := $(systemimage_intermediates)/system.img |
| |
| # Create symlink /system/vendor to /vendor if necessary. |
| ifdef BOARD_USES_VENDORIMAGE |
| define create-system-vendor-symlink |
| $(hide) if [ -d $(TARGET_OUT)/vendor ] && [ ! -h $(TARGET_OUT)/vendor ]; then \ |
| echo 'Non-symlink $(TARGET_OUT)/vendor detected!' 1>&2; \ |
| echo 'You cannot install files to $(TARGET_OUT)/vendor while building a separate vendor.img!' 1>&2; \ |
| exit 1; \ |
| fi |
| $(hide) ln -sf /vendor $(TARGET_OUT)/vendor |
| endef |
| else |
| define create-system-vendor-symlink |
| endef |
| endif |
| |
| # $(1): output file |
| define build-systemimage-target |
| @echo "Target system fs image: $(1)" |
| $(call create-system-vendor-symlink) |
| @mkdir -p $(dir $(1)) $(systemimage_intermediates) && rm -rf $(systemimage_intermediates)/system_image_info.txt |
| $(call generate-userimage-prop-dictionary, $(systemimage_intermediates)/system_image_info.txt, \ |
| skip_fsck=true) |
| $(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH \ |
| ./build/tools/releasetools/build_image.py \ |
| $(TARGET_OUT) $(systemimage_intermediates)/system_image_info.txt $(1) $(TARGET_OUT) \ |
| || ( echo "Out of space? the tree size of $(TARGET_OUT) is (MB): " 1>&2 ;\ |
| du -sm $(TARGET_OUT) 1>&2;\ |
| if [ "$(INTERNAL_USERIMAGES_EXT_VARIANT)" == "ext4" ]; then \ |
| maxsize=$(BOARD_SYSTEMIMAGE_PARTITION_SIZE); \ |
| if [ "$(BOARD_HAS_EXT4_RESERVED_BLOCKS)" == "true" ]; then \ |
| maxsize=$$((maxsize - 4096 * 4096)); \ |
| fi; \ |
| echo "The max is $$(( maxsize / 1048576 )) MB." 1>&2 ;\ |
| else \ |
| echo "The max is $$(( $(BOARD_SYSTEMIMAGE_PARTITION_SIZE) / 1048576 )) MB." 1>&2 ;\ |
| fi; \ |
| mkdir -p $(DIST_DIR); cp $(INSTALLED_FILES_FILE) $(DIST_DIR)/installed-files-rescued.txt; \ |
| exit 1 ) |
| endef |
| |
| $(BUILT_SYSTEMIMAGE): $(FULL_SYSTEMIMAGE_DEPS) $(INSTALLED_FILES_FILE) $(BUILD_IMAGE_SRCS) |
| $(call build-systemimage-target,$@) |
| |
| INSTALLED_SYSTEMIMAGE := $(PRODUCT_OUT)/system.img |
| SYSTEMIMAGE_SOURCE_DIR := $(TARGET_OUT) |
| |
| # The system partition needs room for the recovery image as well. We |
| # now store the recovery image as a binary patch using the boot image |
| # as the source (since they are very similar). Generate the patch so |
| # we can see how big it's going to be, and include that in the system |
| # image size check calculation. |
| ifneq ($(INSTALLED_RECOVERYIMAGE_TARGET),) |
| ifneq ($(BOARD_USES_FULL_RECOVERY_IMAGE),true) |
| intermediates := $(call intermediates-dir-for,PACKAGING,recovery_patch) |
| RECOVERY_FROM_BOOT_PATCH := $(intermediates)/recovery_from_boot.p |
| $(RECOVERY_FROM_BOOT_PATCH): $(INSTALLED_RECOVERYIMAGE_TARGET) \ |
| $(INSTALLED_BOOTIMAGE_TARGET) \ |
| $(HOST_OUT_EXECUTABLES)/imgdiff \ |
| $(HOST_OUT_EXECUTABLES)/bsdiff |
| @echo "Construct recovery from boot" |
| mkdir -p $(dir $@) |
| PATH=$(HOST_OUT_EXECUTABLES):$$PATH $(HOST_OUT_EXECUTABLES)/imgdiff $(INSTALLED_BOOTIMAGE_TARGET) $(INSTALLED_RECOVERYIMAGE_TARGET) $@ |
| else # $(BOARD_USES_FULL_RECOVERY_IMAGE) == true |
| RECOVERY_FROM_BOOT_PATCH := $(INSTALLED_RECOVERYIMAGE_TARGET) |
| endif |
| endif |
| |
| |
| $(INSTALLED_SYSTEMIMAGE): $(BUILT_SYSTEMIMAGE) $(RECOVERY_FROM_BOOT_PATCH) |
| @echo "Install system fs image: $@" |
| $(copy-file-to-target) |
| $(hide) $(call assert-max-image-size,$@ $(RECOVERY_FROM_BOOT_PATCH),$(BOARD_SYSTEMIMAGE_PARTITION_SIZE)) |
| |
| systemimage: $(INSTALLED_SYSTEMIMAGE) |
| |
| .PHONY: systemimage-nodeps snod |
| systemimage-nodeps snod: $(filter-out systemimage-nodeps snod,$(MAKECMDGOALS)) \ |
| | $(INTERNAL_USERIMAGES_DEPS) |
| @echo "make $@: ignoring dependencies" |
| $(call build-systemimage-target,$(INSTALLED_SYSTEMIMAGE)) |
| $(hide) $(call assert-max-image-size,$(INSTALLED_SYSTEMIMAGE),$(BOARD_SYSTEMIMAGE_PARTITION_SIZE)) |
| |
| ifneq (,$(filter systemimage-nodeps snod, $(MAKECMDGOALS))) |
| ifeq (true,$(WITH_DEXPREOPT)) |
| $(warning Warning: with dexpreopt enabled, you may need a full rebuild.) |
| endif |
| endif |
| |
| .PHONY: sync |
| sync: $(INTERNAL_SYSTEMIMAGE_FILES) |
| |
| ####### |
| ## system tarball |
| define build-systemtarball-target |
| $(call pretty,"Target system fs tarball: $(INSTALLED_SYSTEMTARBALL_TARGET)") |
| $(call create-system-vendor-symlink) |
| $(MKTARBALL) $(FS_GET_STATS) \ |
| $(PRODUCT_OUT) system $(PRIVATE_SYSTEM_TAR) \ |
| $(INSTALLED_SYSTEMTARBALL_TARGET) $(TARGET_OUT) |
| endef |
| |
| ifndef SYSTEM_TARBALL_FORMAT |
| SYSTEM_TARBALL_FORMAT := bz2 |
| endif |
| |
| system_tar := $(PRODUCT_OUT)/system.tar |
| INSTALLED_SYSTEMTARBALL_TARGET := $(system_tar).$(SYSTEM_TARBALL_FORMAT) |
| $(INSTALLED_SYSTEMTARBALL_TARGET): PRIVATE_SYSTEM_TAR := $(system_tar) |
| $(INSTALLED_SYSTEMTARBALL_TARGET): $(FS_GET_STATS) $(INTERNAL_SYSTEMIMAGE_FILES) |
| $(build-systemtarball-target) |
| |
| .PHONY: systemtarball-nodeps |
| systemtarball-nodeps: $(FS_GET_STATS) \ |
| $(filter-out systemtarball-nodeps stnod,$(MAKECMDGOALS)) |
| $(build-systemtarball-target) |
| |
| .PHONY: stnod |
| stnod: systemtarball-nodeps |
| |
| # ----------------------------------------------------------------- |
| ## platform.zip: system, plus other files to be used in PDK fusion build, |
| ## in a zip file |
| ## |
| ## PDK_PLATFORM_ZIP_PRODUCT_BINARIES is used to store specified files to platform.zip. |
| ## The variable will be typically set from BoardConfig.mk. |
| ## Files under out dir will be rejected to prevent possible conflicts with other rules. |
| pdk_odex_javalibs := $(strip $(foreach m,$(DEXPREOPT.MODULES.JAVA_LIBRARIES),\ |
| $(if $(filter $(DEXPREOPT.$(m).INSTALLED),$(ALL_DEFAULT_INSTALLED_MODULES)),$(m)))) |
| pdk_odex_apps := $(strip $(foreach m,$(DEXPREOPT.MODULES.APPS),\ |
| $(if $(filter $(DEXPREOPT.$(m).INSTALLED),$(ALL_DEFAULT_INSTALLED_MODULES)),$(m)))) |
| pdk_classes_dex := $(strip \ |
| $(foreach m,$(pdk_odex_javalibs),$(call intermediates-dir-for,JAVA_LIBRARIES,$(m),,COMMON)/javalib.jar) \ |
| $(foreach m,$(pdk_odex_apps),$(call intermediates-dir-for,APPS,$(m))/package.dex.apk)) |
| |
| pdk_odex_config_mk := $(PRODUCT_OUT)/pdk_dexpreopt_config.mk |
| $(pdk_odex_config_mk): PRIVATE_JAVA_LIBRARIES := $(pdk_odex_javalibs) |
| $(pdk_odex_config_mk): PRIVATE_APPS := $(pdk_odex_apps) |
| $(pdk_odex_config_mk) : |
| @echo "PDK odex config makefile: $@" |
| $(hide) mkdir -p $(dir $@) |
| $(hide) echo "# Auto-generated. Do not modify." > $@ |
| $(hide) echo "PDK.DEXPREOPT.JAVA_LIBRARIES:=$(PRIVATE_JAVA_LIBRARIES)" >> $@ |
| $(hide) echo "PDK.DEXPREOPT.APPS:=$(PRIVATE_APPS)" >> $@ |
| $(foreach m,$(PRIVATE_JAVA_LIBRARIES),\ |
| $(hide) echo "PDK.DEXPREOPT.$(m).SRC:=$(patsubst $(OUT_DIR)/%,%,$(call intermediates-dir-for,JAVA_LIBRARIES,$(m),,COMMON)/javalib.jar)" >> $@$(newline)\ |
| $(hide) echo "PDK.DEXPREOPT.$(m).DEX_PREOPT:=$(DEXPREOPT.$(m).DEX_PREOPT)" >> $@$(newline)\ |
| $(hide) echo "PDK.DEXPREOPT.$(m).MULTILIB:=$(DEXPREOPT.$(m).MULTILIB)" >> $@$(newline)\ |
| $(hide) echo "PDK.DEXPREOPT.$(m).DEX_PREOPT_FLAGS:=$(DEXPREOPT.$(m).DEX_PREOPT_FLAGS)" >> $@$(newline)\ |
| ) |
| $(foreach m,$(PRIVATE_APPS),\ |
| $(hide) echo "PDK.DEXPREOPT.$(m).SRC:=$(patsubst $(OUT_DIR)/%,%,$(call intermediates-dir-for,APPS,$(m))/package.dex.apk)" >> $@$(newline)\ |
| $(hide) echo "PDK.DEXPREOPT.$(m).DEX_PREOPT:=$(DEXPREOPT.$(m).DEX_PREOPT)" >> $@$(newline)\ |
| $(hide) echo "PDK.DEXPREOPT.$(m).MULTILIB:=$(DEXPREOPT.$(m).MULTILIB)" >> $@$(newline)\ |
| $(hide) echo "PDK.DEXPREOPT.$(m).DEX_PREOPT_FLAGS:=$(DEXPREOPT.$(m).DEX_PREOPT_FLAGS)" >> $@$(newline)\ |
| $(hide) echo "PDK.DEXPREOPT.$(m).PRIVILEGED_MODULE:=$(DEXPREOPT.$(m).PRIVILEGED_MODULE)" >> $@$(newline)\ |
| $(hide) echo "PDK.DEXPREOPT.$(m).VENDOR_MODULE:=$(DEXPREOPT.$(m).VENDOR_MODULE)" >> $@$(newline)\ |
| $(hide) echo "PDK.DEXPREOPT.$(m).TARGET_ARCH:=$(DEXPREOPT.$(m).TARGET_ARCH)" >> $@$(newline)\ |
| $(hide) echo "PDK.DEXPREOPT.$(m).STRIPPED_SRC:=$(patsubst $(PRODUCT_OUT)/%,%,$(DEXPREOPT.$(m).INSTALLED_STRIPPED))" >> $@$(newline)\ |
| ) |
| |
| PDK_PLATFORM_ZIP_PRODUCT_BINARIES := $(filter-out $(OUT_DIR)/%,$(PDK_PLATFORM_ZIP_PRODUCT_BINARIES)) |
| INSTALLED_PLATFORM_ZIP := $(PRODUCT_OUT)/platform.zip |
| |
| $(INSTALLED_PLATFORM_ZIP): PRIVATE_DEX_FILES := $(pdk_classes_dex) |
| $(INSTALLED_PLATFORM_ZIP): PRIVATE_ODEX_CONFIG := $(pdk_odex_config_mk) |
| $(INSTALLED_PLATFORM_ZIP) : $(INTERNAL_SYSTEMIMAGE_FILES) $(pdk_odex_config_mk) |
| $(call pretty,"Platform zip package: $(INSTALLED_PLATFORM_ZIP)") |
| $(hide) rm -f $@ |
| $(hide) cd $(dir $@) && zip -qryX $(notdir $@) \ |
| $(TARGET_COPY_OUT_SYSTEM) \ |
| $(patsubst $(PRODUCT_OUT)/%, %, $(TARGET_OUT_NOTICE_FILES)) \ |
| $(addprefix symbols/,$(PDK_SYMBOL_FILES_LIST)) |
| ifdef BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE |
| $(hide) cd $(dir $@) && zip -qryX $(notdir $@) \ |
| $(TARGET_COPY_OUT_VENDOR) |
| endif |
| ifneq ($(PDK_PLATFORM_JAVA_ZIP_CONTENTS),) |
| $(hide) cd $(OUT_DIR) && zip -qryX $(patsubst $(OUT_DIR)/%,%,$@) $(PDK_PLATFORM_JAVA_ZIP_CONTENTS) |
| endif |
| ifneq ($(PDK_PLATFORM_ZIP_PRODUCT_BINARIES),) |
| $(hide) zip -qryX $@ $(PDK_PLATFORM_ZIP_PRODUCT_BINARIES) |
| endif |
| @# Add dex-preopt files and config. |
| $(if $(PRIVATE_DEX_FILES),$(hide) cd $(OUT_DIR) && zip -qryX $(patsubst $(OUT_DIR)/%,%,$@ $(PRIVATE_DEX_FILES))) |
| $(hide) zip -qryXj $@ $(PRIVATE_ODEX_CONFIG) |
| |
| .PHONY: platform |
| platform: $(INSTALLED_PLATFORM_ZIP) |
| |
| .PHONY: platform-java |
| platform-java: platform |
| |
| # Dist the platform.zip |
| ifneq (,$(filter platform platform-java, $(MAKECMDGOALS))) |
| $(call dist-for-goals, platform platform-java, $(INSTALLED_PLATFORM_ZIP)) |
| endif |
| |
| # ----------------------------------------------------------------- |
| ## boot tarball |
| define build-boottarball-target |
| $(hide) echo "Target boot fs tarball: $(INSTALLED_BOOTTARBALL_TARGET)" |
| $(hide) mkdir -p $(PRODUCT_OUT)/boot |
| $(hide) cp -f $(INTERNAL_BOOTIMAGE_FILES) $(PRODUCT_OUT)/boot/. |
| $(hide) echo $(INTERNAL_KERNEL_CMDLINE) > $(PRODUCT_OUT)/boot/cmdline |
| $(hide) $(MKTARBALL) $(FS_GET_STATS) \ |
| $(PRODUCT_OUT) boot $(PRIVATE_BOOT_TAR) \ |
| $(INSTALLED_BOOTTARBALL_TARGET) $(TARGET_OUT) |
| endef |
| |
| ifndef BOOT_TARBALL_FORMAT |
| BOOT_TARBALL_FORMAT := bz2 |
| endif |
| |
| boot_tar := $(PRODUCT_OUT)/boot.tar |
| INSTALLED_BOOTTARBALL_TARGET := $(boot_tar).$(BOOT_TARBALL_FORMAT) |
| $(INSTALLED_BOOTTARBALL_TARGET): PRIVATE_BOOT_TAR := $(boot_tar) |
| $(INSTALLED_BOOTTARBALL_TARGET): $(FS_GET_STATS) $(INTERNAL_BOOTIMAGE_FILES) |
| $(build-boottarball-target) |
| |
| .PHONY: boottarball-nodeps btnod |
| boottarball-nodeps btnod: $(FS_GET_STATS) \ |
| $(filter-out boottarball-nodeps btnod,$(MAKECMDGOALS)) |
| $(build-boottarball-target) |
| |
| |
| # ----------------------------------------------------------------- |
| # data partition image |
| INTERNAL_USERDATAIMAGE_FILES := \ |
| $(filter $(TARGET_OUT_DATA)/%,$(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| # Don't build userdata.img if it's extfs but no partition size |
| skip_userdata.img := |
| ifdef INTERNAL_USERIMAGES_EXT_VARIANT |
| ifndef BOARD_USERDATAIMAGE_PARTITION_SIZE |
| skip_userdata.img := true |
| endif |
| endif |
| |
| ifneq ($(skip_userdata.img),true) |
| userdataimage_intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,userdata) |
| BUILT_USERDATAIMAGE_TARGET := $(PRODUCT_OUT)/userdata.img |
| |
| define build-userdataimage-target |
| $(call pretty,"Target userdata fs image: $(INSTALLED_USERDATAIMAGE_TARGET)") |
| @mkdir -p $(TARGET_OUT_DATA) |
| @mkdir -p $(userdataimage_intermediates) && rm -rf $(userdataimage_intermediates)/userdata_image_info.txt |
| $(call generate-userimage-prop-dictionary, $(userdataimage_intermediates)/userdata_image_info.txt, skip_fsck=true) |
| $(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH \ |
| ./build/tools/releasetools/build_image.py \ |
| $(TARGET_OUT_DATA) $(userdataimage_intermediates)/userdata_image_info.txt $(INSTALLED_USERDATAIMAGE_TARGET) $(TARGET_OUT) |
| $(hide) $(call assert-max-image-size,$(INSTALLED_USERDATAIMAGE_TARGET),$(BOARD_USERDATAIMAGE_PARTITION_SIZE)) |
| endef |
| |
| # We just build this directly to the install location. |
| INSTALLED_USERDATAIMAGE_TARGET := $(BUILT_USERDATAIMAGE_TARGET) |
| INSTALLED_USERDATAIMAGE_TARGET_DEPS := \ |
| $(INTERNAL_USERIMAGES_DEPS) \ |
| $(INTERNAL_USERDATAIMAGE_FILES) \ |
| $(BUILD_IMAGE_SRCS) |
| $(INSTALLED_USERDATAIMAGE_TARGET): $(INSTALLED_USERDATAIMAGE_TARGET_DEPS) |
| $(build-userdataimage-target) |
| |
| .PHONY: userdataimage-nodeps |
| userdataimage-nodeps: | $(INTERNAL_USERIMAGES_DEPS) |
| $(build-userdataimage-target) |
| |
| endif # not skip_userdata.img |
| skip_userdata.img := |
| |
| # ASAN libraries in the system image - build rule. |
| ASAN_OUT_DIRS_FOR_SYSTEM_INSTALL := $(sort $(patsubst $(PRODUCT_OUT)/%,%,\ |
| $(TARGET_OUT_SHARED_LIBRARIES) \ |
| $(2ND_TARGET_OUT_SHARED_LIBRARIES) \ |
| $(TARGET_OUT_VENDOR_SHARED_LIBRARIES) \ |
| $(2ND_TARGET_OUT_VENDOR_SHARED_LIBRARIES))) |
| # Extra options: Enforce the system user for the files to avoid having to change ownership. |
| ASAN_SYSTEM_INSTALL_OPTIONS := --owner=1000 --group=1000 |
| # Note: experimentally, it seems not worth it to try to get "best" compression. We don't save |
| # enough space. |
| $(ASAN_IN_SYSTEM_INSTALLED): $(INSTALLED_USERDATAIMAGE_TARGET_DEPS) |
| tar cfj $(ASAN_IN_SYSTEM_INSTALLED) $(ASAN_SYSTEM_INSTALL_OPTIONS) -C $(TARGET_OUT_DATA)/.. $(ASAN_OUT_DIRS_FOR_SYSTEM_INSTALL) >/dev/null |
| |
| ####### |
| ## data partition tarball |
| define build-userdatatarball-target |
| $(call pretty,"Target userdata fs tarball: " \ |
| "$(INSTALLED_USERDATATARBALL_TARGET)") |
| $(MKTARBALL) $(FS_GET_STATS) \ |
| $(PRODUCT_OUT) data $(PRIVATE_USERDATA_TAR) \ |
| $(INSTALLED_USERDATATARBALL_TARGET) $(TARGET_OUT) |
| endef |
| |
| userdata_tar := $(PRODUCT_OUT)/userdata.tar |
| INSTALLED_USERDATATARBALL_TARGET := $(userdata_tar).bz2 |
| $(INSTALLED_USERDATATARBALL_TARGET): PRIVATE_USERDATA_TAR := $(userdata_tar) |
| $(INSTALLED_USERDATATARBALL_TARGET): $(FS_GET_STATS) $(INTERNAL_USERDATAIMAGE_FILES) |
| $(build-userdatatarball-target) |
| |
| $(call dist-for-goals,userdatatarball,$(INSTALLED_USERDATATARBALL_TARGET)) |
| |
| .PHONY: userdatatarball-nodeps |
| userdatatarball-nodeps: $(FS_GET_STATS) |
| $(build-userdatatarball-target) |
| |
| |
| # ----------------------------------------------------------------- |
| # partition table image |
| ifdef BOARD_BPT_INPUT_FILES |
| |
| BUILT_BPTIMAGE_TARGET := $(PRODUCT_OUT)/partition-table.img |
| BUILT_BPTJSON_TARGET := $(PRODUCT_OUT)/partition-table.bpt |
| |
| INTERNAL_BVBTOOL_MAKE_TABLE_ARGS := \ |
| --output_gpt $(BUILT_BPTIMAGE_TARGET) \ |
| --output_json $(BUILT_BPTJSON_TARGET) \ |
| $(foreach file, $(BOARD_BPT_INPUT_FILES), --input $(file)) |
| |
| ifdef BOARD_BPT_DISK_SIZE |
| INTERNAL_BVBTOOL_MAKE_TABLE_ARGS += --disk_size $(BOARD_BPT_DISK_SIZE) |
| endif |
| |
| define build-bptimage-target |
| $(call pretty,"Target partition table image: $(INSTALLED_BPTIMAGE_TARGET)") |
| $(hide) $(BPTTOOL) make_table $(INTERNAL_BVBTOOL_MAKE_TABLE_ARGS) $(BOARD_BPT_MAKE_TABLE_ARGS) |
| endef |
| |
| INSTALLED_BPTIMAGE_TARGET := $(BUILT_BPTIMAGE_TARGET) |
| $(BUILT_BPTJSON_TARGET): $(INSTALLED_BPTIMAGE_TARGET) |
| $(hide) touch -c $(BUILT_BPTJSON_TARGET) |
| |
| $(INSTALLED_BPTIMAGE_TARGET): $(BPTTOOL) $(BOARD_BPT_INPUT_FILES) |
| $(build-bptimage-target) |
| |
| .PHONY: bptimage-nodeps |
| bptimage-nodeps: |
| $(build-bptimage-target) |
| |
| endif # BOARD_BPT_INPUT_FILES |
| |
| # ----------------------------------------------------------------- |
| # cache partition image |
| ifdef BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE |
| INTERNAL_CACHEIMAGE_FILES := \ |
| $(filter $(TARGET_OUT_CACHE)/%,$(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| cacheimage_intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,cache) |
| BUILT_CACHEIMAGE_TARGET := $(PRODUCT_OUT)/cache.img |
| |
| define build-cacheimage-target |
| $(call pretty,"Target cache fs image: $(INSTALLED_CACHEIMAGE_TARGET)") |
| @mkdir -p $(TARGET_OUT_CACHE) |
| @mkdir -p $(cacheimage_intermediates) && rm -rf $(cacheimage_intermediates)/cache_image_info.txt |
| $(call generate-userimage-prop-dictionary, $(cacheimage_intermediates)/cache_image_info.txt, skip_fsck=true) |
| $(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH \ |
| ./build/tools/releasetools/build_image.py \ |
| $(TARGET_OUT_CACHE) $(cacheimage_intermediates)/cache_image_info.txt $(INSTALLED_CACHEIMAGE_TARGET) $(TARGET_OUT) |
| $(hide) $(call assert-max-image-size,$(INSTALLED_CACHEIMAGE_TARGET),$(BOARD_CACHEIMAGE_PARTITION_SIZE)) |
| endef |
| |
| # We just build this directly to the install location. |
| INSTALLED_CACHEIMAGE_TARGET := $(BUILT_CACHEIMAGE_TARGET) |
| $(INSTALLED_CACHEIMAGE_TARGET): $(INTERNAL_USERIMAGES_DEPS) $(INTERNAL_CACHEIMAGE_FILES) $(BUILD_IMAGE_SRCS) |
| $(build-cacheimage-target) |
| |
| .PHONY: cacheimage-nodeps |
| cacheimage-nodeps: | $(INTERNAL_USERIMAGES_DEPS) |
| $(build-cacheimage-target) |
| |
| else # BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE |
| # we need to ignore the broken cache link when doing the rsync |
| IGNORE_CACHE_LINK := --exclude=cache |
| endif # BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE |
| |
| # ----------------------------------------------------------------- |
| # system_other partition image |
| ifeq ($(BOARD_USES_SYSTEM_OTHER_ODEX),true) |
| BOARD_USES_SYSTEM_OTHER := true |
| |
| # Marker file to identify that odex files are installed |
| INSTALLED_SYSTEM_OTHER_ODEX_MARKER := $(TARGET_OUT_SYSTEM_OTHER)/system-other-odex-marker |
| ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_SYSTEM_OTHER_ODEX_MARKER) |
| $(INSTALLED_SYSTEM_OTHER_ODEX_MARKER): |
| $(hide) touch $@ |
| endif |
| |
| ifdef BOARD_USES_SYSTEM_OTHER |
| INTERNAL_SYSTEMOTHERIMAGE_FILES := \ |
| $(filter $(TARGET_OUT_SYSTEM_OTHER)/%,\ |
| $(ALL_DEFAULT_INSTALLED_MODULES)\ |
| $(ALL_PDK_FUSION_FILES)) |
| |
| INSTALLED_FILES_FILE_SYSTEMOTHER := $(PRODUCT_OUT)/installed-files-system-other.txt |
| $(INSTALLED_FILES_FILE_SYSTEMOTHER) : $(INTERNAL_SYSTEMOTHERIMAGE_FILES) $(FILESLIST) |
| @echo Installed file list: $@ |
| @mkdir -p $(dir $@) |
| @rm -f $@ |
| $(hide) $(FILESLIST) $(TARGET_OUT_SYSTEM_OTHER) > $(@:.txt=.json) |
| $(hide) build/tools/fileslist_util.py -c $(@:.txt=.json) > $@ |
| |
| systemotherimage_intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,system_other) |
| BUILT_SYSTEMOTHERIMAGE_TARGET := $(PRODUCT_OUT)/system_other.img |
| |
| # Note that we assert the size is SYSTEMIMAGE_PARTITION_SIZE since this is the 'b' system image. |
| define build-systemotherimage-target |
| $(call pretty,"Target system_other fs image: $(INSTALLED_SYSTEMOTHERIMAGE_TARGET)") |
| @mkdir -p $(TARGET_OUT_SYSTEM_OTHER) |
| @mkdir -p $(systemotherimage_intermediates) && rm -rf $(systemotherimage_intermediates)/system_other_image_info.txt |
| $(call generate-userimage-prop-dictionary, $(systemotherimage_intermediates)/system_other_image_info.txt, skip_fsck=true) |
| $(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH \ |
| ./build/tools/releasetools/build_image.py \ |
| $(TARGET_OUT_SYSTEM_OTHER) $(systemotherimage_intermediates)/system_other_image_info.txt $(INSTALLED_SYSTEMOTHERIMAGE_TARGET) $(TARGET_OUT) |
| $(hide) $(call assert-max-image-size,$(INSTALLED_SYSTEMOTHERIMAGE_TARGET),$(BOARD_SYSTEMIMAGE_PARTITION_SIZE)) |
| endef |
| |
| # We just build this directly to the install location. |
| INSTALLED_SYSTEMOTHERIMAGE_TARGET := $(BUILT_SYSTEMOTHERIMAGE_TARGET) |
| $(INSTALLED_SYSTEMOTHERIMAGE_TARGET): $(INTERNAL_USERIMAGES_DEPS) $(INTERNAL_SYSTEMOTHERIMAGE_FILES) $(INSTALLED_FILES_FILE_SYSTEMOTHER) |
| $(build-systemotherimage-target) |
| |
| .PHONY: systemotherimage-nodeps |
| systemotherimage-nodeps: | $(INTERNAL_USERIMAGES_DEPS) |
| $(build-systemotherimage-target) |
| |
| endif # BOARD_USES_SYSTEM_OTHER |
| |
| |
| # ----------------------------------------------------------------- |
| # vendor partition image |
| ifdef BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE |
| INTERNAL_VENDORIMAGE_FILES := \ |
| $(filter $(TARGET_OUT_VENDOR)/%,\ |
| $(ALL_DEFAULT_INSTALLED_MODULES)\ |
| $(ALL_PDK_FUSION_FILES)) |
| |
| # platform.zip depends on $(INTERNAL_VENDORIMAGE_FILES). |
| $(INSTALLED_PLATFORM_ZIP) : $(INTERNAL_VENDORIMAGE_FILES) |
| |
| INSTALLED_FILES_FILE_VENDOR := $(PRODUCT_OUT)/installed-files-vendor.txt |
| $(INSTALLED_FILES_FILE_VENDOR) : $(INTERNAL_VENDORIMAGE_FILES) $(FILESLIST) |
| @echo Installed file list: $@ |
| @mkdir -p $(dir $@) |
| @rm -f $@ |
| $(hide) $(FILESLIST) $(TARGET_OUT_VENDOR) > $(@:.txt=.json) |
| $(hide) build/tools/fileslist_util.py -c $(@:.txt=.json) > $@ |
| |
| vendorimage_intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,vendor) |
| BUILT_VENDORIMAGE_TARGET := $(PRODUCT_OUT)/vendor.img |
| define build-vendorimage-target |
| $(call pretty,"Target vendor fs image: $(INSTALLED_VENDORIMAGE_TARGET)") |
| @mkdir -p $(TARGET_OUT_VENDOR) |
| @mkdir -p $(vendorimage_intermediates) && rm -rf $(vendorimage_intermediates)/vendor_image_info.txt |
| $(call generate-userimage-prop-dictionary, $(vendorimage_intermediates)/vendor_image_info.txt, skip_fsck=true) |
| $(if $(BOARD_VENDOR_KERNEL_MODULES), \ |
| $(call build-image-kernel-modules,$(BOARD_VENDOR_KERNEL_MODULES),$(TARGET_OUT_VENDOR),vendor/,$(call intermediates-dir-for,PACKAGING,depmod_vendor))) |
| $(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH \ |
| ./build/tools/releasetools/build_image.py \ |
| $(TARGET_OUT_VENDOR) $(vendorimage_intermediates)/vendor_image_info.txt $(INSTALLED_VENDORIMAGE_TARGET) $(TARGET_OUT) |
| $(hide) $(call assert-max-image-size,$(INSTALLED_VENDORIMAGE_TARGET),$(BOARD_VENDORIMAGE_PARTITION_SIZE)) |
| endef |
| |
| # We just build this directly to the install location. |
| INSTALLED_VENDORIMAGE_TARGET := $(BUILT_VENDORIMAGE_TARGET) |
| $(INSTALLED_VENDORIMAGE_TARGET): $(INTERNAL_USERIMAGES_DEPS) $(INTERNAL_VENDORIMAGE_FILES) $(INSTALLED_FILES_FILE_VENDOR) $(BUILD_IMAGE_SRCS) $(DEPMOD) $(BOARD_VENDOR_KERNEL_MODULES) |
| $(build-vendorimage-target) |
| |
| .PHONY: vendorimage-nodeps vnod |
| vendorimage-nodeps vnod: | $(INTERNAL_USERIMAGES_DEPS) $(DEPMOD) |
| $(build-vendorimage-target) |
| |
| sync: $(INTERNAL_VENDORIMAGE_FILES) |
| |
| else ifdef BOARD_PREBUILT_VENDORIMAGE |
| INSTALLED_VENDORIMAGE_TARGET := $(PRODUCT_OUT)/vendor.img |
| $(eval $(call copy-one-file,$(BOARD_PREBUILT_VENDORIMAGE),$(INSTALLED_VENDORIMAGE_TARGET))) |
| endif |
| |
| # ----------------------------------------------------------------- |
| # dtbo image |
| ifdef BOARD_PREBUILT_DTBOIMAGE |
| INSTALLED_DTBOIMAGE_TARGET := $(PRODUCT_OUT)/dtbo.img |
| |
| ifeq ($(BOARD_AVB_ENABLE),true) |
| $(INSTALLED_DTBOIMAGE_TARGET): $(BOARD_PREBUILT_DTBOIMAGE) $(AVBTOOL) $(BOARD_AVB_DTBO_KEY_PATH) |
| cp $(BOARD_PREBUILT_DTBOIMAGE) $@ |
| $(AVBTOOL) add_hash_footer \ |
| --image $@ \ |
| --partition_size $(BOARD_DTBOIMG_PARTITION_SIZE) \ |
| --partition_name dtbo $(INTERNAL_AVB_DTBO_SIGNING_ARGS) \ |
| $(BOARD_AVB_DTBO_ADD_HASH_FOOTER_ARGS) |
| else |
| $(INSTALLED_DTBOIMAGE_TARGET): $(BOARD_PREBUILT_DTBOIMAGE) |
| cp $(BOARD_PREBUILT_DTBOIMAGE) $@ |
| endif |
| |
| endif |
| |
| # Convert to lower case without requiring a shell, which isn't cacheable. |
| to-lower = $(subst A,a,$(subst B,b,$(subst C,c,$(subst D,d,$(subst E,e,$(subst F,f,$(subst G,g,\ |
| $(subst H,h,$(subst I,i,$(subst J,j,$(subst K,k,$(subst L,l,$(subst M,m,$(subst N,n,$(subst O,o,\ |
| $(subst P,p,$(subst Q,q,$(subst R,r,$(subst S,s,$(subst T,t,$(subst U,u,$(subst V,v,$(subst W,w,\ |
| $(subst X,x,$(subst Y,y,$(subst Z,z,$1)))))))))))))))))))))))))) |
| # Convert to upper case without requiring a shell, which isn't cacheable. |
| to-upper=$(subst a,A,$(subst b,B,$(subst c,C,$(subst d,D,$(subst e,E,$(subst f,F,$(subst g,G,\ |
| $(subst h,H,$(subst i,I,$(subst j,J,$(subst k,K,$(subst l,L,$(subst m,M,$(subst n,N,$(subst o,O,\ |
| $(subst p,P,$(subst q,Q,$(subst r,R,$(subst s,S,$(subst t,T,$(subst u,U,$(subst v,V,$(subst w,W,\ |
| $(subst x,X,$(subst y,Y,$(subst z,Z,$1)))))))))))))))))))))))))) |
| |
| # ----------------------------------------------------------------- |
| # vbmeta image |
| ifeq ($(BOARD_AVB_ENABLE),true) |
| |
| BUILT_VBMETAIMAGE_TARGET := $(PRODUCT_OUT)/vbmeta.img |
| AVB_CHAIN_KEY_DIR := $(TARGET_OUT_INTERMEDIATES)/avb_chain_keys |
| |
| ifdef BOARD_AVB_KEY_PATH |
| $(if $(BOARD_AVB_ALGORITHM),,$(error BOARD_AVB_ALGORITHM is not defined)) |
| else |
| # If key path isn't specified, use the 4096-bit test key. |
| BOARD_AVB_ALGORITHM := SHA256_RSA4096 |
| BOARD_AVB_KEY_PATH := external/avb/test/data/testkey_rsa4096.pem |
| endif |
| |
| INTERNAL_AVB_SIGNING_ARGS := \ |
| --algorithm $(BOARD_AVB_ALGORITHM) --key $(BOARD_AVB_KEY_PATH) |
| |
| BOOT_FOOTER_ARGS := BOARD_AVB_BOOT_ADD_HASH_FOOTER_ARGS |
| DTBO_FOOTER_ARGS := BOARD_AVB_DTBO_ADD_HASH_FOOTER_ARGS |
| SYSTEM_FOOTER_ARGS := BOARD_AVB_SYSTEM_ADD_HASHTREE_FOOTER_ARGS |
| VENDOR_FOOTER_ARGS := BOARD_AVB_VENDOR_ADD_HASHTREE_FOOTER_ARGS |
| |
| # Check and set required build variables for a chain partition. |
| # $(1): the partition to enable AVB chain, e.g., BOOT or SYSTEM. |
| define check-and-set-avb-chain-args |
| $(eval PART := $(1)) |
| $(eval part=$(call to-lower,$(PART))) |
| |
| $(eval _key_path := BOARD_AVB_$(PART)_KEY_PATH) |
| $(eval _signing_algorithm := BOARD_AVB_$(PART)_ALGORITHM) |
| $(eval _rollback_index := BOARD_AVB_$(PART)_ROLLBACK_INDEX) |
| $(eval _rollback_index_location := BOARD_AVB_$(PART)_ROLLBACK_INDEX_LOCATION) |
| $(if $($(_key_path)),,$(error $(_key_path) is not defined)) |
| $(if $($(_signing_algorithm)),,$(error $(_signing_algorithm) is not defined)) |
| $(if $($(_rollback_index)),,$(error $(_rollback_index) is not defined)) |
| $(if $($(_rollback_index_location)),,$(error $(_rollback_index_location) is not defined)) |
| |
| # Set INTERNAL_AVB_(PART)_SIGNING_ARGS |
| $(eval _signing_args := INTERNAL_AVB_$(PART)_SIGNING_ARGS) |
| $(eval $(_signing_args) := \ |
| --algorithm $($(_signing_algorithm)) --key $($(_key_path))) |
| |
| $(eval INTERNAL_AVB_MAKE_VBMETA_IMAGE_ARGS += \ |
| --chain_partition $(part):$($(_rollback_index_location)):$(AVB_CHAIN_KEY_DIR)/$(part).avbpubkey) |
| |
| # Set rollback_index via footer args |
| $(eval _footer_args := $(PART)_FOOTER_ARGS) |
| $(eval $($(_footer_args)) += --rollback_index $($(_rollback_index))) |
| endef |
| |
| ifdef BOARD_AVB_BOOT_KEY_PATH |
| $(eval $(call check-and-set-avb-chain-args,BOOT)) |
| else |
| INTERNAL_AVB_MAKE_VBMETA_IMAGE_ARGS += \ |
| --include_descriptors_from_image $(INSTALLED_BOOTIMAGE_TARGET) |
| endif |
| |
| ifdef BOARD_AVB_SYSTEM_KEY_PATH |
| $(eval $(call check-and-set-avb-chain-args,SYSTEM)) |
| else |
| INTERNAL_AVB_MAKE_VBMETA_IMAGE_ARGS += \ |
| --include_descriptors_from_image $(INSTALLED_SYSTEMIMAGE) |
| endif |
| |
| ifdef INSTALLED_VENDORIMAGE_TARGET |
| ifdef BOARD_AVB_VENDOR_KEY_PATH |
| $(eval $(call check-and-set-avb-chain-args,VENDOR)) |
| else |
| INTERNAL_AVB_MAKE_VBMETA_IMAGE_ARGS += \ |
| --include_descriptors_from_image $(INSTALLED_VENDORIMAGE_TARGET) |
| endif |
| endif |
| |
| ifdef INSTALLED_DTBOIMAGE_TARGET |
| ifdef BOARD_AVB_DTBO_KEY_PATH |
| $(eval $(call check-and-set-avb-chain-args,DTBO)) |
| else |
| INTERNAL_AVB_MAKE_VBMETA_IMAGE_ARGS += \ |
| --include_descriptors_from_image $(INSTALLED_DTBOIMAGE_TARGET) |
| endif |
| endif |
| |
| BOARD_AVB_MAKE_VBMETA_IMAGE_ARGS += --padding_size 4096 |
| |
| # Add kernel cmdline descriptor for kernel to mount system.img as root with |
| # dm-verity. This works when system.img is either chained or not-chained: |
| # - chained: The --setup_as_rootfs_from_kernel option will add dm-verity kernel |
| # cmdline descriptor to system.img |
| # - not-chained: The --include_descriptors_from_image option for make_vbmeta_image |
| # will include the kernel cmdline descriptor from system.img into vbmeta.img |
| ifeq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true) |
| BOARD_AVB_SYSTEM_ADD_HASHTREE_FOOTER_ARGS += --setup_as_rootfs_from_kernel |
| endif |
| |
| ifdef BOARD_AVB_ROLLBACK_INDEX |
| BOARD_AVB_MAKE_VBMETA_IMAGE_ARGS += --rollback_index $(BOARD_AVB_ROLLBACK_INDEX) |
| endif |
| |
| ifndef BOARD_BOOTIMAGE_PARTITION_SIZE |
| $(error BOARD_BOOTIMAGE_PARTITION_SIZE must be set for BOARD_AVB_ENABLE) |
| endif |
| |
| ifndef BOARD_SYSTEMIMAGE_PARTITION_SIZE |
| $(error BOARD_SYSTEMIMAGE_PARTITION_SIZE must be set for BOARD_AVB_ENABLE) |
| endif |
| |
| # $(1): the directory to extract public keys to |
| define extract-avb-chain-public-keys |
| $(if $(BOARD_AVB_BOOT_KEY_PATH),\ |
| $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_BOOT_KEY_PATH) \ |
| --output $(1)/boot.avbpubkey) |
| $(if $(BOARD_AVB_SYSTEM_KEY_PATH),\ |
| $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_SYSTEM_KEY_PATH) \ |
| --output $(1)/system.avbpubkey) |
| $(if $(BOARD_AVB_VENDOR_KEY_PATH),\ |
| $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_VENDOR_KEY_PATH) \ |
| --output $(1)/vendor.avbpubkey) |
| $(if $(BOARD_AVB_DTBO_KEY_PATH),\ |
| $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_DTBO_KEY_PATH) \ |
| --output $(1)/dtbo.avbpubkey) |
| endef |
| |
| define build-vbmetaimage-target |
| $(call pretty,"Target vbmeta image: $(INSTALLED_VBMETAIMAGE_TARGET)") |
| $(hide) mkdir -p $(AVB_CHAIN_KEY_DIR) |
| $(call extract-avb-chain-public-keys, $(AVB_CHAIN_KEY_DIR)) |
| $(hide) $(AVBTOOL) make_vbmeta_image \ |
| $(INTERNAL_AVB_MAKE_VBMETA_IMAGE_ARGS) \ |
| $(INTERNAL_AVB_SIGNING_ARGS) \ |
| $(BOARD_AVB_MAKE_VBMETA_IMAGE_ARGS) \ |
| --output $@ |
| $(hide) rm -rf $(AVB_CHAIN_KEY_DIR) |
| endef |
| |
| INSTALLED_VBMETAIMAGE_TARGET := $(BUILT_VBMETAIMAGE_TARGET) |
| $(INSTALLED_VBMETAIMAGE_TARGET): $(AVBTOOL) $(INSTALLED_BOOTIMAGE_TARGET) $(INSTALLED_SYSTEMIMAGE) $(INSTALLED_VENDORIMAGE_TARGET) $(INSTALLED_DTBOIMAGE_TARGET) $(BOARD_AVB_KEY_PATH) |
| $(build-vbmetaimage-target) |
| |
| .PHONY: vbmetaimage-nodeps |
| vbmetaimage-nodeps: |
| $(build-vbmetaimage-target) |
| |
| endif # BOARD_AVB_ENABLE |
| |
| # ----------------------------------------------------------------- |
| # bring in the installer image generation defines if necessary |
| ifeq ($(TARGET_USE_DISKINSTALLER),true) |
| include bootable/diskinstaller/config.mk |
| endif |
| |
| # ----------------------------------------------------------------- |
| # host tools needed to build dist and OTA packages |
| |
| build_ota_package := true |
| ifeq ($(TARGET_SKIP_OTA_PACKAGE),true) |
| build_ota_package := false |
| endif |
| ifeq ($(BUILD_OS),darwin) |
| build_ota_package := false |
| endif |
| ifneq ($(strip $(SANITIZE_TARGET)),) |
| build_ota_package := false |
| endif |
| ifeq ($(TARGET_PRODUCT),sdk) |
| build_ota_package := false |
| endif |
| ifneq ($(filter generic%,$(TARGET_DEVICE)),) |
| build_ota_package := false |
| endif |
| ifeq ($(TARGET_NO_KERNEL),true) |
| build_ota_package := false |
| endif |
| ifeq ($(recovery_fstab),) |
| build_ota_package := false |
| endif |
| ifeq ($(TARGET_BUILD_PDK),true) |
| build_ota_package := false |
| endif |
| |
| ifeq ($(build_ota_package),true) |
| OTATOOLS := $(HOST_OUT_EXECUTABLES)/minigzip \ |
| $(HOST_OUT_EXECUTABLES)/aapt \ |
| $(HOST_OUT_EXECUTABLES)/mkbootfs \ |
| $(HOST_OUT_EXECUTABLES)/mkbootimg \ |
| $(HOST_OUT_EXECUTABLES)/fs_config \ |
| $(HOST_OUT_EXECUTABLES)/zipalign \ |
| $(HOST_OUT_EXECUTABLES)/bsdiff \ |
| $(HOST_OUT_EXECUTABLES)/imgdiff \ |
| $(HOST_OUT_JAVA_LIBRARIES)/dumpkey.jar \ |
| $(HOST_OUT_JAVA_LIBRARIES)/signapk.jar \ |
| $(HOST_OUT_JAVA_LIBRARIES)/BootSignature.jar \ |
| $(HOST_OUT_JAVA_LIBRARIES)/VeritySigner.jar \ |
| $(HOST_OUT_EXECUTABLES)/make_ext4fs \ |
| $(HOST_OUT_EXECUTABLES)/mkuserimg.sh \ |
| $(HOST_OUT_EXECUTABLES)/mke2fs \ |
| $(HOST_OUT_EXECUTABLES)/mkuserimg_mke2fs.sh \ |
| $(HOST_OUT_EXECUTABLES)/e2fsdroid \ |
| $(HOST_OUT_EXECUTABLES)/mksquashfsimage.sh \ |
| $(HOST_OUT_EXECUTABLES)/mksquashfs \ |
| $(HOST_OUT_EXECUTABLES)/mkf2fsuserimg.sh \ |
| $(HOST_OUT_EXECUTABLES)/make_f2fs \ |
| $(HOST_OUT_EXECUTABLES)/simg2img \ |
| $(HOST_OUT_EXECUTABLES)/e2fsck \ |
| $(HOST_OUT_EXECUTABLES)/build_verity_tree \ |
| $(HOST_OUT_EXECUTABLES)/verity_signer \ |
| $(HOST_OUT_EXECUTABLES)/verity_verifier \ |
| $(HOST_OUT_EXECUTABLES)/append2simg \ |
| $(HOST_OUT_EXECUTABLES)/img2simg \ |
| $(HOST_OUT_EXECUTABLES)/boot_signer \ |
| $(HOST_OUT_EXECUTABLES)/fec \ |
| $(HOST_OUT_EXECUTABLES)/brillo_update_payload \ |
| $(HOST_OUT_EXECUTABLES)/lib/shflags/shflags \ |
| $(HOST_OUT_EXECUTABLES)/delta_generator \ |
| $(AVBTOOL) \ |
| $(BLK_ALLOC_TO_BASE_FS) \ |
| $(BRO) |
| |
| ifeq (true,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VBOOT)) |
| OTATOOLS += \ |
| $(FUTILITY) \ |
| $(VBOOT_SIGNER) |
| endif |
| |
| # Shared libraries. |
| OTATOOLS += \ |
| $(HOST_LIBRARY_PATH)/libc++$(HOST_SHLIB_SUFFIX) \ |
| $(HOST_LIBRARY_PATH)/liblog$(HOST_SHLIB_SUFFIX) \ |
| $(HOST_LIBRARY_PATH)/libcutils$(HOST_SHLIB_SUFFIX) \ |
| $(HOST_LIBRARY_PATH)/libselinux$(HOST_SHLIB_SUFFIX) \ |
| $(HOST_LIBRARY_PATH)/libcrypto-host$(HOST_SHLIB_SUFFIX) \ |
| $(HOST_LIBRARY_PATH)/libext2fs-host$(HOST_SHLIB_SUFFIX) \ |
| $(HOST_LIBRARY_PATH)/libext2_blkid-host$(HOST_SHLIB_SUFFIX) \ |
| $(HOST_LIBRARY_PATH)/libext2_com_err-host$(HOST_SHLIB_SUFFIX) \ |
| $(HOST_LIBRARY_PATH)/libext2_e2p-host$(HOST_SHLIB_SUFFIX) \ |
| $(HOST_LIBRARY_PATH)/libext2_misc$(HOST_SHLIB_SUFFIX) \ |
| $(HOST_LIBRARY_PATH)/libext2_profile-host$(HOST_SHLIB_SUFFIX) \ |
| $(HOST_LIBRARY_PATH)/libext2_quota-host$(HOST_SHLIB_SUFFIX) \ |
| $(HOST_LIBRARY_PATH)/libext2_uuid-host$(HOST_SHLIB_SUFFIX) \ |
| $(HOST_LIBRARY_PATH)/libconscrypt_openjdk_jni$(HOST_SHLIB_SUFFIX) \ |
| $(HOST_LIBRARY_PATH)/libbrillo$(HOST_SHLIB_SUFFIX) \ |
| $(HOST_LIBRARY_PATH)/libbrillo-stream$(HOST_SHLIB_SUFFIX) \ |
| $(HOST_LIBRARY_PATH)/libchrome$(HOST_SHLIB_SUFFIX) \ |
| $(HOST_LIBRARY_PATH)/libcurl-host$(HOST_SHLIB_SUFFIX) \ |
| $(HOST_LIBRARY_PATH)/libevent-host$(HOST_SHLIB_SUFFIX) \ |
| $(HOST_LIBRARY_PATH)/libprotobuf-cpp-lite$(HOST_SHLIB_SUFFIX) \ |
| $(HOST_LIBRARY_PATH)/libssl-host$(HOST_SHLIB_SUFFIX) \ |
| $(HOST_LIBRARY_PATH)/libz-host$(HOST_SHLIB_SUFFIX) \ |
| $(HOST_LIBRARY_PATH)/libsparse-host$(HOST_SHLIB_SUFFIX) \ |
| $(HOST_LIBRARY_PATH)/libbase$(HOST_SHLIB_SUFFIX) \ |
| $(HOST_LIBRARY_PATH)/libpcre2$(HOST_SHLIB_SUFFIX) \ |
| $(HOST_LIBRARY_PATH)/libbrotli$(HOST_SHLIB_SUFFIX) |
| |
| |
| .PHONY: otatools |
| otatools: $(OTATOOLS) |
| |
| BUILT_OTATOOLS_PACKAGE := $(PRODUCT_OUT)/otatools.zip |
| $(BUILT_OTATOOLS_PACKAGE): zip_root := $(call intermediates-dir-for,PACKAGING,otatools)/otatools |
| |
| OTATOOLS_DEPS := \ |
| system/extras/verity/build_verity_metadata.py \ |
| system/extras/ext4_utils/mke2fs.conf \ |
| external/avb/test/data/testkey_rsa4096.pem \ |
| $(shell find build/target/product/security -type f -name \*.x509.pem -o -name \*.pk8 -o \ |
| -name verity_key | sort) \ |
| $(shell find device vendor -type f -name \*.pk8 -o -name verifiedboot\* -o \ |
| -name \*.x509.pem -o -name oem\*.prop | sort) |
| |
| OTATOOLS_RELEASETOOLS := \ |
| $(shell find build/tools/releasetools -name \*.pyc -prune -o -type f | sort) |
| |
| ifeq (true,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VBOOT)) |
| OTATOOLS_DEPS += \ |
| $(shell find external/vboot_reference/tests/devkeys -type f | sort) |
| endif |
| |
| $(BUILT_OTATOOLS_PACKAGE): $(OTATOOLS) $(OTATOOLS_DEPS) $(OTATOOLS_RELEASETOOLS) | $(ACP) |
| @echo "Package OTA tools: $@" |
| $(hide) rm -rf $@ $(zip_root) |
| $(hide) mkdir -p $(dir $@) $(zip_root)/bin $(zip_root)/framework $(zip_root)/releasetools |
| $(call copy-files-with-structure,$(OTATOOLS),$(HOST_OUT)/,$(zip_root)) |
| $(hide) $(ACP) -r -d -p build/tools/releasetools/* $(zip_root)/releasetools |
| $(hide) rm -rf $@ $(zip_root)/releasetools/*.pyc |
| $(hide) (cd $(zip_root) && zip -qryX $(abspath $@) *) |
| $(hide) echo $(OTATOOLS_DEPS) | xargs zip -qryX $(abspath $@)>/dev/null || true |
| |
| .PHONY: otatools-package |
| otatools-package: $(BUILT_OTATOOLS_PACKAGE) |
| |
| endif # build_ota_package |
| |
| # ----------------------------------------------------------------- |
| # A zip of the directories that map to the target filesystem. |
| # This zip can be used to create an OTA package or filesystem image |
| # as a post-build step. |
| # |
| name := $(TARGET_PRODUCT) |
| ifeq ($(TARGET_BUILD_TYPE),debug) |
| name := $(name)_debug |
| endif |
| name := $(name)-target_files-$(FILE_NAME_TAG) |
| |
| intermediates := $(call intermediates-dir-for,PACKAGING,target_files) |
| BUILT_TARGET_FILES_PACKAGE := $(intermediates)/$(name).zip |
| $(BUILT_TARGET_FILES_PACKAGE): intermediates := $(intermediates) |
| $(BUILT_TARGET_FILES_PACKAGE): \ |
| zip_root := $(intermediates)/$(name) |
| |
| # $(1): Directory to copy |
| # $(2): Location to copy it to |
| # The "ls -A" is to prevent "acp s/* d" from failing if s is empty. |
| define package_files-copy-root |
| if [ -d "$(strip $(1))" -a "$$(ls -A $(1))" ]; then \ |
| mkdir -p $(2) && \ |
| $(ACP) -rd $(strip $(1))/* $(2); \ |
| fi |
| endef |
| |
| built_ota_tools := |
| |
| # We can't build static executables when SANITIZE_TARGET=address |
| ifeq ($(strip $(SANITIZE_TARGET)),) |
| built_ota_tools += \ |
| $(call intermediates-dir-for,EXECUTABLES,updater,,,$(TARGET_PREFER_32_BIT))/updater |
| endif |
| |
| $(BUILT_TARGET_FILES_PACKAGE): PRIVATE_OTA_TOOLS := $(built_ota_tools) |
| |
| $(BUILT_TARGET_FILES_PACKAGE): PRIVATE_RECOVERY_API_VERSION := $(RECOVERY_API_VERSION) |
| $(BUILT_TARGET_FILES_PACKAGE): PRIVATE_RECOVERY_FSTAB_VERSION := $(RECOVERY_FSTAB_VERSION) |
| |
| ifeq ($(TARGET_RELEASETOOLS_EXTENSIONS),) |
| # default to common dir for device vendor |
| tool_extensions := $(TARGET_DEVICE_DIR)/../common |
| else |
| tool_extensions := $(TARGET_RELEASETOOLS_EXTENSIONS) |
| endif |
| tool_extension := $(wildcard $(tool_extensions)/releasetools.py) |
| $(BUILT_TARGET_FILES_PACKAGE): PRIVATE_TOOL_EXTENSIONS := $(tool_extensions) |
| $(BUILT_TARGET_FILES_PACKAGE): PRIVATE_TOOL_EXTENSION := $(tool_extension) |
| |
| ifeq ($(AB_OTA_UPDATER),true) |
| # Build zlib fingerprint if using the AB Updater. |
| updater_dep := $(TARGET_OUT_COMMON_GEN)/zlib_fingerprint |
| updater_dep += system/update_engine/update_engine.conf |
| else |
| # Build OTA tools if not using the AB Updater. |
| updater_dep := $(built_ota_tools) |
| endif |
| $(BUILT_TARGET_FILES_PACKAGE): $(updater_dep) |
| |
| # If we are using recovery as boot, output recovery files to BOOT/. |
| ifeq ($(BOARD_USES_RECOVERY_AS_BOOT),true) |
| $(BUILT_TARGET_FILES_PACKAGE): PRIVATE_RECOVERY_OUT := BOOT |
| else |
| $(BUILT_TARGET_FILES_PACKAGE): PRIVATE_RECOVERY_OUT := RECOVERY |
| endif |
| |
| ifeq ($(AB_OTA_UPDATER),true) |
| ifdef BRILLO_VENDOR_PARTITIONS |
| $(BUILT_TARGET_FILES_PACKAGE): $(foreach p,$(BRILLO_VENDOR_PARTITIONS),\ |
| $(call word-colon,1,$(p))/$(call word-colon,2,$(p))) |
| endif |
| ifdef OSRELEASED_DIRECTORY |
| $(BUILT_TARGET_FILES_PACKAGE): $(TARGET_OUT_OEM)/$(OSRELEASED_DIRECTORY)/product_id |
| $(BUILT_TARGET_FILES_PACKAGE): $(TARGET_OUT_OEM)/$(OSRELEASED_DIRECTORY)/product_version |
| $(BUILT_TARGET_FILES_PACKAGE): $(TARGET_OUT_ETC)/$(OSRELEASED_DIRECTORY)/system_version |
| endif |
| endif |
| |
| # Run fs_config while creating the target files package |
| # $1: root directory |
| # $2: add prefix |
| define fs_config |
| (cd $(1); find . -type d | sed 's,$$,/,'; find . \! -type d) | cut -c 3- | sort | sed 's,^,$(2),' | $(HOST_OUT_EXECUTABLES)/fs_config -C -D $(TARGET_OUT) -S $(SELINUX_FC) |
| endef |
| |
| # Depending on the various images guarantees that the underlying |
| # directories are up-to-date. |
| $(BUILT_TARGET_FILES_PACKAGE): \ |
| $(INSTALLED_BOOTIMAGE_TARGET) \ |
| $(INSTALLED_RADIOIMAGE_TARGET) \ |
| $(INSTALLED_RECOVERYIMAGE_TARGET) \ |
| $(FULL_SYSTEMIMAGE_DEPS) \ |
| $(INSTALLED_USERDATAIMAGE_TARGET) \ |
| $(INSTALLED_CACHEIMAGE_TARGET) \ |
| $(INSTALLED_VENDORIMAGE_TARGET) \ |
| $(INSTALLED_DTBOIMAGE_TARGET) \ |
| $(INTERNAL_SYSTEMOTHERIMAGE_FILES) \ |
| $(INSTALLED_ANDROID_INFO_TXT_TARGET) \ |
| $(INSTALLED_KERNEL_TARGET) \ |
| $(INSTALLED_2NDBOOTLOADER_TARGET) \ |
| $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_BASE_FS_PATH) \ |
| $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VENDOR_BASE_FS_PATH) \ |
| $(SELINUX_FC) \ |
| $(APKCERTS_FILE) \ |
| $(SOONG_ZIP) \ |
| $(HOST_OUT_EXECUTABLES)/fs_config \ |
| $(HOST_OUT_EXECUTABLES)/imgdiff \ |
| $(HOST_OUT_EXECUTABLES)/bsdiff \ |
| $(BUILD_IMAGE_SRCS) \ |
| | $(ACP) |
| @echo "Package target files: $@" |
| $(call create-system-vendor-symlink) |
| $(hide) rm -rf $@ $@.list $(zip_root) |
| $(hide) mkdir -p $(dir $@) $(zip_root) |
| ifneq (,$(INSTALLED_RECOVERYIMAGE_TARGET)$(filter true,$(BOARD_USES_RECOVERY_AS_BOOT))) |
| @# Components of the recovery image |
| $(hide) mkdir -p $(zip_root)/$(PRIVATE_RECOVERY_OUT) |
| $(hide) $(call package_files-copy-root, \ |
| $(TARGET_RECOVERY_ROOT_OUT),$(zip_root)/$(PRIVATE_RECOVERY_OUT)/RAMDISK) |
| ifdef INSTALLED_KERNEL_TARGET |
| $(hide) cp $(INSTALLED_KERNEL_TARGET) $(zip_root)/$(PRIVATE_RECOVERY_OUT)/kernel |
| endif |
| ifdef INSTALLED_2NDBOOTLOADER_TARGET |
| $(hide) cp $(INSTALLED_2NDBOOTLOADER_TARGET) $(zip_root)/$(PRIVATE_RECOVERY_OUT)/second |
| endif |
| ifdef INTERNAL_KERNEL_CMDLINE |
| $(hide) echo "$(INTERNAL_KERNEL_CMDLINE)" > $(zip_root)/$(PRIVATE_RECOVERY_OUT)/cmdline |
| endif |
| ifdef BOARD_KERNEL_BASE |
| $(hide) echo "$(BOARD_KERNEL_BASE)" > $(zip_root)/$(PRIVATE_RECOVERY_OUT)/base |
| endif |
| ifdef BOARD_KERNEL_PAGESIZE |
| $(hide) echo "$(BOARD_KERNEL_PAGESIZE)" > $(zip_root)/$(PRIVATE_RECOVERY_OUT)/pagesize |
| endif |
| endif # INSTALLED_RECOVERYIMAGE_TARGET defined or BOARD_USES_RECOVERY_AS_BOOT is true |
| @# Components of the boot image |
| $(hide) mkdir -p $(zip_root)/BOOT |
| ifeq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true) |
| $(hide) mkdir -p $(zip_root)/ROOT |
| $(hide) $(call package_files-copy-root, \ |
| $(TARGET_ROOT_OUT),$(zip_root)/ROOT) |
| else |
| $(hide) $(call package_files-copy-root, \ |
| $(TARGET_ROOT_OUT),$(zip_root)/BOOT/RAMDISK) |
| endif |
| @# If we are using recovery as boot, this is already done when processing recovery. |
| ifneq ($(BOARD_USES_RECOVERY_AS_BOOT),true) |
| ifdef INSTALLED_KERNEL_TARGET |
| $(hide) cp $(INSTALLED_KERNEL_TARGET) $(zip_root)/BOOT/kernel |
| endif |
| ifdef INSTALLED_2NDBOOTLOADER_TARGET |
| $(hide) cp $(INSTALLED_2NDBOOTLOADER_TARGET) $(zip_root)/BOOT/second |
| endif |
| ifdef INTERNAL_KERNEL_CMDLINE |
| $(hide) echo "$(INTERNAL_KERNEL_CMDLINE)" > $(zip_root)/BOOT/cmdline |
| endif |
| ifdef BOARD_KERNEL_BASE |
| $(hide) echo "$(BOARD_KERNEL_BASE)" > $(zip_root)/BOOT/base |
| endif |
| ifdef BOARD_KERNEL_PAGESIZE |
| $(hide) echo "$(BOARD_KERNEL_PAGESIZE)" > $(zip_root)/BOOT/pagesize |
| endif |
| endif # BOARD_USES_RECOVERY_AS_BOOT |
| $(hide) $(foreach t,$(INSTALLED_RADIOIMAGE_TARGET),\ |
| mkdir -p $(zip_root)/RADIO; \ |
| cp $(t) $(zip_root)/RADIO/$(notdir $(t));) |
| @# Contents of the system image |
| $(hide) $(call package_files-copy-root, \ |
| $(SYSTEMIMAGE_SOURCE_DIR),$(zip_root)/SYSTEM) |
| @# Contents of the data image |
| $(hide) $(call package_files-copy-root, \ |
| $(TARGET_OUT_DATA),$(zip_root)/DATA) |
| ifdef BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE |
| @# Contents of the vendor image |
| $(hide) $(call package_files-copy-root, \ |
| $(TARGET_OUT_VENDOR),$(zip_root)/VENDOR) |
| endif |
| ifdef INSTALLED_SYSTEMOTHERIMAGE_TARGET |
| @# Contents of the system_other image |
| $(hide) $(call package_files-copy-root, \ |
| $(TARGET_OUT_SYSTEM_OTHER),$(zip_root)/SYSTEM_OTHER) |
| endif |
| @# Extra contents of the OTA package |
| $(hide) mkdir -p $(zip_root)/OTA |
| $(hide) cp $(INSTALLED_ANDROID_INFO_TXT_TARGET) $(zip_root)/OTA/ |
| ifneq ($(AB_OTA_UPDATER),true) |
| ifneq ($(built_ota_tools),) |
| $(hide) mkdir -p $(zip_root)/OTA/bin |
| $(hide) cp $(PRIVATE_OTA_TOOLS) $(zip_root)/OTA/bin/ |
| endif |
| endif |
| @# Files that do not end up in any images, but are necessary to |
| @# build them. |
| $(hide) mkdir -p $(zip_root)/META |
| $(hide) cp $(APKCERTS_FILE) $(zip_root)/META/apkcerts.txt |
| ifneq ($(tool_extension),) |
| $(hide) cp $(PRIVATE_TOOL_EXTENSION) $(zip_root)/META/ |
| endif |
| $(hide) echo "$(PRODUCT_OTA_PUBLIC_KEYS)" > $(zip_root)/META/otakeys.txt |
| $(hide) cp $(SELINUX_FC) $(zip_root)/META/file_contexts.bin |
| $(hide) echo "recovery_api_version=$(PRIVATE_RECOVERY_API_VERSION)" > $(zip_root)/META/misc_info.txt |
| $(hide) echo "fstab_version=$(PRIVATE_RECOVERY_FSTAB_VERSION)" >> $(zip_root)/META/misc_info.txt |
| ifdef BOARD_FLASH_BLOCK_SIZE |
| $(hide) echo "blocksize=$(BOARD_FLASH_BLOCK_SIZE)" >> $(zip_root)/META/misc_info.txt |
| endif |
| ifdef BOARD_BOOTIMAGE_PARTITION_SIZE |
| $(hide) echo "boot_size=$(BOARD_BOOTIMAGE_PARTITION_SIZE)" >> $(zip_root)/META/misc_info.txt |
| endif |
| ifeq ($(BOARD_USES_RECOVERY_AS_BOOT),) |
| $(hide) echo "recovery_as_boot=$(BOARD_USES_RECOVERY_AS_BOOT)" >> $(zip_root)/META/misc_info.txt |
| endif |
| ifeq ($(INSTALLED_RECOVERYIMAGE_TARGET),) |
| $(hide) echo "no_recovery=true" >> $(zip_root)/META/misc_info.txt |
| endif |
| ifdef BOARD_RECOVERYIMAGE_PARTITION_SIZE |
| $(hide) echo "recovery_size=$(BOARD_RECOVERYIMAGE_PARTITION_SIZE)" >> $(zip_root)/META/misc_info.txt |
| endif |
| ifdef BOARD_HAS_EXT4_RESERVED_BLOCKS |
| $(hide) echo "has_ext4_reserved_blocks=$(BOARD_HAS_EXT4_RESERVED_BLOCKS)" >> $(zip_root)/META/misc_info.txt |
| endif |
| ifdef TARGET_RECOVERY_FSTYPE_MOUNT_OPTIONS |
| @# TARGET_RECOVERY_FSTYPE_MOUNT_OPTIONS can be empty to indicate that nothing but defaults should be used. |
| $(hide) echo "recovery_mount_options=$(TARGET_RECOVERY_FSTYPE_MOUNT_OPTIONS)" >> $(zip_root)/META/misc_info.txt |
| else |
| $(hide) echo "recovery_mount_options=$(DEFAULT_TARGET_RECOVERY_FSTYPE_MOUNT_OPTIONS)" >> $(zip_root)/META/misc_info.txt |
| endif |
| $(hide) echo "tool_extensions=$(PRIVATE_TOOL_EXTENSIONS)" >> $(zip_root)/META/misc_info.txt |
| $(hide) echo "default_system_dev_certificate=$(DEFAULT_SYSTEM_DEV_CERTIFICATE)" >> $(zip_root)/META/misc_info.txt |
| ifdef PRODUCT_EXTRA_RECOVERY_KEYS |
| $(hide) echo "extra_recovery_keys=$(PRODUCT_EXTRA_RECOVERY_KEYS)" >> $(zip_root)/META/misc_info.txt |
| endif |
| $(hide) echo 'mkbootimg_args=$(BOARD_MKBOOTIMG_ARGS)' >> $(zip_root)/META/misc_info.txt |
| $(hide) echo 'mkbootimg_version_args=$(INTERNAL_MKBOOTIMG_VERSION_ARGS)' >> $(zip_root)/META/misc_info.txt |
| $(hide) echo "multistage_support=1" >> $(zip_root)/META/misc_info.txt |
| $(hide) echo "blockimgdiff_versions=3,4" >> $(zip_root)/META/misc_info.txt |
| ifneq ($(OEM_THUMBPRINT_PROPERTIES),) |
| # OTA scripts are only interested in fingerprint related properties |
| $(hide) echo "oem_fingerprint_properties=$(OEM_THUMBPRINT_PROPERTIES)" >> $(zip_root)/META/misc_info.txt |
| endif |
| ifneq ($(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_BASE_FS_PATH),) |
| $(hide) cp $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_BASE_FS_PATH) \ |
| $(zip_root)/META/$(notdir $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_BASE_FS_PATH)) |
| endif |
| ifneq ($(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VENDOR_BASE_FS_PATH),) |
| $(hide) cp $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VENDOR_BASE_FS_PATH) \ |
| $(zip_root)/META/$(notdir $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VENDOR_BASE_FS_PATH)) |
| endif |
| ifneq ($(strip $(SANITIZE_TARGET)),) |
| # We need to create userdata.img with real data because the instrumented libraries are in userdata.img. |
| $(hide) echo "userdata_img_with_data=true" >> $(zip_root)/META/misc_info.txt |
| endif |
| ifeq ($(BOARD_USES_FULL_RECOVERY_IMAGE),true) |
| $(hide) echo "full_recovery_image=true" >> $(zip_root)/META/misc_info.txt |
| endif |
| ifeq ($(BOARD_AVB_ENABLE),true) |
| $(hide) echo "avb_enable=true" >> $(zip_root)/META/misc_info.txt |
| $(hide) echo "avb_vbmeta_key_path=$(BOARD_AVB_KEY_PATH)" >> $(zip_root)/META/misc_info.txt |
| $(hide) echo "avb_vbmeta_algorithm=$(BOARD_AVB_ALGORITHM)" >> $(zip_root)/META/misc_info.txt |
| $(hide) echo "avb_vbmeta_args=$(BOARD_AVB_MAKE_VBMETA_IMAGE_ARGS)" >> $(zip_root)/META/misc_info.txt |
| $(hide) echo "avb_boot_add_hash_footer_args=$(BOARD_AVB_BOOT_ADD_HASH_FOOTER_ARGS)" >> $(zip_root)/META/misc_info.txt |
| ifdef BOARD_AVB_BOOT_KEY_PATH |
| $(hide) echo "avb_boot_key_path=$(BOARD_AVB_BOOT_KEY_PATH)" >> $(zip_root)/META/misc_info.txt |
| $(hide) echo "avb_boot_algorithm=$(BOARD_AVB_BOOT_ALGORITHM)" >> $(zip_root)/META/misc_info.txt |
| $(hide) echo "avb_boot_rollback_index_location=$(BOARD_AVB_BOOT_ROLLBACK_INDEX_LOCATION)" >> $(zip_root)/META/misc_info.txt |
| endif # BOARD_AVB_BOOT_KEY_PATH |
| endif # BOARD_AVB_ENABLE |
| ifdef BOARD_BPT_INPUT_FILES |
| $(hide) echo "board_bpt_enable=true" >> $(zip_root)/META/misc_info.txt |
| $(hide) echo "board_bpt_make_table_args=$(BOARD_BPT_MAKE_TABLE_ARGS)" >> $(zip_root)/META/misc_info.txt |
| $(hide) echo "board_bpt_input_files=$(BOARD_BPT_INPUT_FILES)" >> $(zip_root)/META/misc_info.txt |
| endif |
| ifdef BOARD_BPT_DISK_SIZE |
| $(hide) echo "board_bpt_disk_size=$(BOARD_BPT_DISK_SIZE)" >> $(zip_root)/META/misc_info.txt |
| endif |
| $(call generate-userimage-prop-dictionary, $(zip_root)/META/misc_info.txt) |
| ifneq ($(INSTALLED_RECOVERYIMAGE_TARGET),) |
| $(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH MKBOOTIMG=$(MKBOOTIMG) \ |
| ./build/tools/releasetools/make_recovery_patch $(zip_root) $(zip_root) |
| endif |
| ifeq ($(AB_OTA_UPDATER),true) |
| @# When using the A/B updater, include the updater config files in the zip. |
| $(hide) cp $(TOPDIR)system/update_engine/update_engine.conf $(zip_root)/META/update_engine_config.txt |
| $(hide) cp $(TARGET_OUT_COMMON_GEN)/zlib_fingerprint $(zip_root)/META/zlib_fingerprint.txt |
| $(hide) for part in $(AB_OTA_PARTITIONS); do \ |
| echo "$${part}" >> $(zip_root)/META/ab_partitions.txt; \ |
| done |
| $(hide) for conf in $(AB_OTA_POSTINSTALL_CONFIG); do \ |
| echo "$${conf}" >> $(zip_root)/META/postinstall_config.txt; \ |
| done |
| @# Include the build type in META/misc_info.txt so the server can easily differentiate production builds. |
| $(hide) echo "build_type=$(TARGET_BUILD_VARIANT)" >> $(zip_root)/META/misc_info.txt |
| $(hide) echo "ab_update=true" >> $(zip_root)/META/misc_info.txt |
| ifdef BRILLO_VENDOR_PARTITIONS |
| $(hide) mkdir -p $(zip_root)/VENDOR_IMAGES |
| $(hide) for f in $(BRILLO_VENDOR_PARTITIONS); do \ |
| pair1="$$(echo $$f | awk -F':' '{print $$1}')"; \ |
| pair2="$$(echo $$f | awk -F':' '{print $$2}')"; \ |
| src=$${pair1}/$${pair2}; \ |
| dest=$(zip_root)/VENDOR_IMAGES/$${pair2}; \ |
| mkdir -p $$(dirname "$${dest}"); \ |
| cp $${src} $${dest}; \ |
| done; |
| endif |
| ifdef OSRELEASED_DIRECTORY |
| $(hide) cp $(TARGET_OUT_OEM)/$(OSRELEASED_DIRECTORY)/product_id $(zip_root)/META/product_id.txt |
| $(hide) cp $(TARGET_OUT_OEM)/$(OSRELEASED_DIRECTORY)/product_version $(zip_root)/META/product_version.txt |
| $(hide) cp $(TARGET_OUT_ETC)/$(OSRELEASED_DIRECTORY)/system_version $(zip_root)/META/system_version.txt |
| endif |
| endif |
| ifeq ($(BREAKPAD_GENERATE_SYMBOLS),true) |
| @# If breakpad symbols have been generated, add them to the zip. |
| $(hide) $(ACP) -r $(TARGET_OUT_BREAKPAD) $(zip_root)/BREAKPAD |
| endif |
| ifdef BOARD_PREBUILT_VENDORIMAGE |
| $(hide) mkdir -p $(zip_root)/IMAGES |
| $(hide) cp $(INSTALLED_VENDORIMAGE_TARGET) $(zip_root)/IMAGES/ |
| endif |
| ifdef BOARD_PREBUILT_DTBOIMAGE |
| $(hide) mkdir -p $(zip_root)/PREBUILT_IMAGES |
| $(hide) cp $(INSTALLED_DTBOIMAGE_TARGET) $(zip_root)/PREBUILT_IMAGES/ |
| $(hide) echo "has_dtbo=true" >> $(zip_root)/META/misc_info.txt |
| ifeq ($(BOARD_AVB_ENABLE),true) |
| $(hide) echo "dtbo_size=$(BOARD_DTBOIMG_PARTITION_SIZE)" >> $(zip_root)/META/misc_info.txt |
| $(hide) echo "avb_dtbo_add_hash_footer_args=$(BOARD_AVB_DTBO_ADD_HASH_FOOTER_ARGS)" >> $(zip_root)/META/misc_info.txt |
| ifdef BOARD_AVB_DTBO_KEY_PATH |
| $(hide) echo "avb_dtbo_key_path=$(BOARD_AVB_DTBO_KEY_PATH)" >> $(zip_root)/META/misc_info.txt |
| $(hide) echo "avb_dtbo_algorithm=$(BOARD_AVB_DTBO_ALGORITHM)" >> $(zip_root)/META/misc_info.txt |
| $(hide) echo "avb_dtbo_rollback_index_location=$(BOARD_AVB_DTBO_ROLLBACK_INDEX_LOCATION)" \ |
| >> $(zip_root)/META/misc_info.txt |
| endif # BOARD_AVB_DTBO_KEY_PATH |
| endif # BOARD_AVB_ENABLE |
| endif # BOARD_PREBUILT_DTBOIMAGE |
| @# The radio images in BOARD_PACK_RADIOIMAGES will be additionally copied from RADIO/ into |
| @# IMAGES/, which then will be added into <product>-img.zip. Such images must be listed in |
| @# INSTALLED_RADIOIMAGE_TARGET. |
| $(hide) $(foreach part,$(BOARD_PACK_RADIOIMAGES), \ |
| echo $(part) >> $(zip_root)/META/pack_radioimages.txt;) |
| @# Run fs_config on all the system, vendor, boot ramdisk, |
| @# and recovery ramdisk files in the zip, and save the output |
| $(hide) $(call fs_config,$(zip_root)/SYSTEM,system/) > $(zip_root)/META/filesystem_config.txt |
| ifdef BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE |
| $(hide) $(call fs_config,$(zip_root)/VENDOR,vendor/) > $(zip_root)/META/vendor_filesystem_config.txt |
| endif |
| ifeq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true) |
| $(hide) $(call fs_config,$(zip_root)/ROOT,) > $(zip_root)/META/root_filesystem_config.txt |
| endif |
| $(hide) $(call fs_config,$(zip_root)/BOOT/RAMDISK,) > $(zip_root)/META/boot_filesystem_config.txt |
| ifneq ($(INSTALLED_RECOVERYIMAGE_TARGET),) |
| $(hide) $(call fs_config,$(zip_root)/RECOVERY/RAMDISK,) > $(zip_root)/META/recovery_filesystem_config.txt |
| endif |
| ifdef INSTALLED_SYSTEMOTHERIMAGE_TARGET |
| $(hide) $(call fs_config,$(zip_root)/SYSTEM_OTHER,system/) > $(zip_root)/META/system_other_filesystem_config.txt |
| endif |
| $(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH MKBOOTIMG=$(MKBOOTIMG) \ |
| ./build/tools/releasetools/add_img_to_target_files -a -v -p $(HOST_OUT) $(zip_root) |
| @# Zip everything up, preserving symlinks and placing META/ files first to |
| @# help early validation of the .zip file while uploading it. |
| $(hide) find $(zip_root)/META | sort >$@.list |
| $(hide) find $(zip_root) -path $(zip_root)/META -prune -o -print | sort >>$@.list |
| $(hide) $(SOONG_ZIP) -d -o $@ -C $(zip_root) -l $@.list |
| |
| .PHONY: target-files-package |
| target-files-package: $(BUILT_TARGET_FILES_PACKAGE) |
| |
| ifneq ($(filter $(MAKECMDGOALS),target-files-package),) |
| $(call dist-for-goals, target-files-package, $(BUILT_TARGET_FILES_PACKAGE)) |
| endif |
| |
| # ----------------------------------------------------------------- |
| # NDK Sysroot Package |
| NDK_SYSROOT_TARGET := $(PRODUCT_OUT)/ndk_sysroot.tar.bz2 |
| $(NDK_SYSROOT_TARGET): ndk |
| @echo Package NDK sysroot... |
| $(hide) tar cjf $@ -C $(SOONG_OUT_DIR) ndk |
| |
| $(call dist-for-goals,sdk,$(NDK_SYSROOT_TARGET)) |
| |
| ifeq ($(build_ota_package),true) |
| # ----------------------------------------------------------------- |
| # OTA update package |
| |
| name := $(TARGET_PRODUCT) |
| ifeq ($(TARGET_BUILD_TYPE),debug) |
| name := $(name)_debug |
| endif |
| name := $(name)-ota-$(FILE_NAME_TAG) |
| |
| INTERNAL_OTA_PACKAGE_TARGET := $(PRODUCT_OUT)/$(name).zip |
| |
| $(INTERNAL_OTA_PACKAGE_TARGET): KEY_CERT_PAIR := $(DEFAULT_KEY_CERT_PAIR) |
| |
| ifeq ($(AB_OTA_UPDATER),true) |
| $(INTERNAL_OTA_PACKAGE_TARGET): $(BRILLO_UPDATE_PAYLOAD) |
| else |
| $(INTERNAL_OTA_PACKAGE_TARGET): $(BRO) |
| endif |
| |
| $(INTERNAL_OTA_PACKAGE_TARGET): $(BUILT_TARGET_FILES_PACKAGE) \ |
| build/tools/releasetools/ota_from_target_files |
| @echo "Package OTA: $@" |
| $(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH MKBOOTIMG=$(MKBOOTIMG) \ |
| ./build/tools/releasetools/ota_from_target_files -v \ |
| --block \ |
| --extracted_input_target_files $(patsubst %.zip,%,$(BUILT_TARGET_FILES_PACKAGE)) \ |
| -p $(HOST_OUT) \ |
| -k $(KEY_CERT_PAIR) \ |
| $(if $(OEM_OTA_CONFIG), -o $(OEM_OTA_CONFIG)) \ |
| $(BUILT_TARGET_FILES_PACKAGE) $@ |
| |
| .PHONY: otapackage |
| otapackage: $(INTERNAL_OTA_PACKAGE_TARGET) |
| |
| endif # build_ota_package |
| |
| # ----------------------------------------------------------------- |
| # The update package |
| |
| name := $(TARGET_PRODUCT) |
| ifeq ($(TARGET_BUILD_TYPE),debug) |
| name := $(name)_debug |
| endif |
| name := $(name)-img-$(FILE_NAME_TAG) |
| |
| INTERNAL_UPDATE_PACKAGE_TARGET := $(PRODUCT_OUT)/$(name).zip |
| |
| $(INTERNAL_UPDATE_PACKAGE_TARGET): $(BUILT_TARGET_FILES_PACKAGE) $(ZIP2ZIP) |
| @echo "Package: $@" |
| $(hide) $(ZIP2ZIP) -i $(BUILT_TARGET_FILES_PACKAGE) -o $@ \ |
| OTA/android-info.txt:android-info.txt "IMAGES/*.img:." |
| |
| .PHONY: updatepackage |
| updatepackage: $(INTERNAL_UPDATE_PACKAGE_TARGET) |
| |
| # ----------------------------------------------------------------- |
| # A zip of the symbols directory. Keep the full paths to make it |
| # more obvious where these files came from. |
| # |
| name := $(TARGET_PRODUCT) |
| ifeq ($(TARGET_BUILD_TYPE),debug) |
| name := $(name)_debug |
| endif |
| name := $(name)-symbols-$(FILE_NAME_TAG) |
| |
| SYMBOLS_ZIP := $(PRODUCT_OUT)/$(name).zip |
| # For apps_only build we'll establish the dependency later in build/core/main.mk. |
| ifndef TARGET_BUILD_APPS |
| $(SYMBOLS_ZIP): $(INSTALLED_SYSTEMIMAGE) \ |
| $(INSTALLED_BOOTIMAGE_TARGET) \ |
| $(INSTALLED_USERDATAIMAGE_TARGET) \ |
| $(INSTALLED_VENDORIMAGE_TARGET) \ |
| $(updater_dep) |
| endif |
| $(SYMBOLS_ZIP): PRIVATE_LIST_FILE := $(call intermediates-dir-for,PACKAGING,symbols)/filelist |
| $(SYMBOLS_ZIP): $(SOONG_ZIP) |
| @echo "Package symbols: $@" |
| $(hide) rm -rf $@ $(PRIVATE_LIST_FILE) |
| $(hide) mkdir -p $(dir $@) $(TARGET_OUT_UNSTRIPPED) $(dir $(PRIVATE_LIST_FILE)) |
| $(hide) find $(TARGET_OUT_UNSTRIPPED) | sort >$(PRIVATE_LIST_FILE) |
| $(hide) $(SOONG_ZIP) -d -o $@ -C $(OUT_DIR)/.. -l $(PRIVATE_LIST_FILE) |
| # ----------------------------------------------------------------- |
| # A zip of the coverage directory. |
| # |
| name := $(TARGET_PRODUCT) |
| ifeq ($(TARGET_BUILD_TYPE),debug) |
| name := $(name)_debug |
| endif |
| name := $(name)-coverage-$(FILE_NAME_TAG) |
| COVERAGE_ZIP := $(PRODUCT_OUT)/$(name).zip |
| ifndef TARGET_BUILD_APPS |
| $(COVERAGE_ZIP): $(INSTALLED_SYSTEMIMAGE) \ |
| $(INSTALLED_BOOTIMAGE_TARGET) \ |
| $(INSTALLED_USERDATAIMAGE_TARGET) \ |
| $(INSTALLED_VENDORIMAGE_TARGET) |
| endif |
| $(COVERAGE_ZIP): PRIVATE_LIST_FILE := $(call intermediates-dir-for,PACKAGING,coverage)/filelist |
| $(COVERAGE_ZIP): $(SOONG_ZIP) |
| @echo "Package coverage: $@" |
| $(hide) rm -rf $@ $(PRIVATE_LIST_FILE) |
| $(hide) mkdir -p $(dir $@) $(TARGET_OUT_COVERAGE) $(dir $(PRIVATE_LIST_FILE)) |
| $(hide) find $(TARGET_OUT_COVERAGE) | sort >$(PRIVATE_LIST_FILE) |
| $(hide) $(SOONG_ZIP) -d -o $@ -C $(TARGET_OUT_COVERAGE) -l $(PRIVATE_LIST_FILE) |
| |
| # ----------------------------------------------------------------- |
| # A zip of the Android Apps. Not keeping full path so that we don't |
| # include product names when distributing |
| # |
| name := $(TARGET_PRODUCT) |
| ifeq ($(TARGET_BUILD_TYPE),debug) |
| name := $(name)_debug |
| endif |
| name := $(name)-apps-$(FILE_NAME_TAG) |
| |
| APPS_ZIP := $(PRODUCT_OUT)/$(name).zip |
| $(APPS_ZIP): $(INSTALLED_SYSTEMIMAGE) |
| @echo "Package apps: $@" |
| $(hide) rm -rf $@ |
| $(hide) mkdir -p $(dir $@) |
| $(hide) apps_to_zip=`find $(TARGET_OUT_APPS) $(TARGET_OUT_APPS_PRIVILEGED) -mindepth 2 -maxdepth 3 -name "*.apk"`; \ |
| if [ -z "$$apps_to_zip" ]; then \ |
| echo "No apps to zip up. Generating empty apps archive." ; \ |
| a=$$(mktemp /tmp/XXXXXXX) && touch $$a && zip $@ $$a && zip -d $@ $$a; \ |
| else \ |
| zip -qjX $@ $$apps_to_zip; \ |
| fi |
| |
| ifeq (true,$(EMMA_INSTRUMENT)) |
| #------------------------------------------------------------------ |
| # An archive of classes for use in generating code-coverage reports |
| # These are the uninstrumented versions of any classes that were |
| # to be instrumented. |
| # Any dependencies are set up later in build/core/main.mk. |
| |
| ifeq ($(ANDROID_COMPILE_WITH_JACK),false) |
| JACOCO_REPORT_CLASSES_ALL := $(PRODUCT_OUT)/jacoco-report-classes-all.jar |
| $(JACOCO_REPORT_CLASSES_ALL) : |
| @echo "Collecting uninstrumented classes" |
| $(hide) find $(TARGET_COMMON_OUT_ROOT) $(HOST_COMMON_OUT_ROOT) -name "jacoco-report-classes.jar" | \ |
| zip -@ -0 -q -X $@ |
| # Meaning of these options: |
| # -@ scan stdin for file paths to add to the zip |
| # -0 don't do any compression |
| # -q supress most output |
| # -X skip storing extended file attributes |
| |
| else |
| EMMA_META_ZIP := $(PRODUCT_OUT)/emma_meta.zip |
| $(EMMA_META_ZIP) : |
| @echo "Collecting Emma coverage meta files." |
| $(hide) find $(TARGET_COMMON_OUT_ROOT) $(HOST_COMMON_OUT_ROOT) -name "coverage.em" | \ |
| zip -@ -qX $@ |
| endif |
| |
| endif # EMMA_INSTRUMENT=true |
| |
| |
| #------------------------------------------------------------------ |
| # A zip of Proguard obfuscation dictionary files. |
| # Only for apps_only build. |
| # |
| ifdef TARGET_BUILD_APPS |
| PROGUARD_DICT_ZIP := $(PRODUCT_OUT)/$(TARGET_PRODUCT)-proguard-dict-$(FILE_NAME_TAG).zip |
| # the dependency will be set up later in build/core/main.mk. |
| $(PROGUARD_DICT_ZIP) : |
| @echo "Packaging Proguard obfuscation dictionary files." |
| $(hide) dict_files=`find $(TARGET_OUT_COMMON_INTERMEDIATES)/APPS -name proguard_dictionary -o -name jack_dictionary`; \ |
| if [ -n "$$dict_files" ]; then \ |
| unobfuscated_jars=$${dict_files//proguard_dictionary/classes.jar}; \ |
| zip -qX $@ $$dict_files $$unobfuscated_jars; \ |
| else \ |
| touch $(dir $@)/zipdummy; \ |
| (cd $(dir $@) && zip -q $(notdir $@) zipdummy); \ |
| zip -qd $@ zipdummy; \ |
| rm $(dir $@)/zipdummy; \ |
| fi |
| |
| endif # TARGET_BUILD_APPS |
| |
| # ----------------------------------------------------------------- |
| # dalvik something |
| .PHONY: dalvikfiles |
| dalvikfiles: $(INTERNAL_DALVIK_MODULES) |
| |
| ifeq ($(BUILD_QEMU_IMAGES),true) |
| INSTALLED_QEMU_SYSTEMIMAGE := $(PRODUCT_OUT)/system-qemu.img |
| MK_QEMU_IMAGE_SH := device/generic/goldfish/tools/mk_qemu_image.sh |
| SGDISK_HOST := $(HOST_OUT_EXECUTABLES)/sgdisk |
| $(INSTALLED_QEMU_SYSTEMIMAGE): $(INSTALLED_SYSTEMIMAGE) $(MK_QEMU_IMAGE_SH) $(SGDISK_HOST) |
| @echo Create system-qemu.img |
| (export SGDISK=$(SGDISK_HOST); $(MK_QEMU_IMAGE_SH) ${PRODUCT_OUT}/system.img) |
| |
| systemimage: $(INSTALLED_QEMU_SYSTEMIMAGE) |
| droidcore: $(INSTALLED_QEMU_SYSTEMIMAGE) |
| ifeq ($(BOARD_USES_VENDORIMAGE),true) |
| INSTALLED_QEMU_VENDORIMAGE := $(PRODUCT_OUT)/vendor-qemu.img |
| $(INSTALLED_QEMU_VENDORIMAGE): $(INSTALLED_VENDORIMAGE_TARGET) $(MK_QEMU_IMAGE_SH) $(SGDISK_HOST) |
| @echo Create vendor-qemu.img |
| (export SGDISK=$(SGDISK_HOST); $(MK_QEMU_IMAGE_SH) ${PRODUCT_OUT}/vendor.img) |
| |
| vendorimage: $(INSTALLED_QEMU_VENDORIMAGE) |
| droidcore: $(INSTALLED_QEMU_VENDORIMAGE) |
| endif |
| endif |
| # ----------------------------------------------------------------- |
| # The emulator package |
| ifeq ($(BUILD_EMULATOR),true) |
| INTERNAL_EMULATOR_PACKAGE_FILES += \ |
| $(HOST_OUT_EXECUTABLES)/emulator$(HOST_EXECUTABLE_SUFFIX) \ |
| prebuilts/qemu-kernel/$(TARGET_ARCH)/kernel-qemu \ |
| $(INSTALLED_RAMDISK_TARGET) \ |
| $(INSTALLED_SYSTEMIMAGE) \ |
| $(INSTALLED_USERDATAIMAGE_TARGET) |
| |
| name := $(TARGET_PRODUCT)-emulator-$(FILE_NAME_TAG) |
| |
| INTERNAL_EMULATOR_PACKAGE_TARGET := $(PRODUCT_OUT)/$(name).zip |
| |
| $(INTERNAL_EMULATOR_PACKAGE_TARGET): $(INTERNAL_EMULATOR_PACKAGE_FILES) |
| @echo "Package: $@" |
| $(hide) zip -qjX $@ $(INTERNAL_EMULATOR_PACKAGE_FILES) |
| |
| endif |
| # ----------------------------------------------------------------- |
| # Old PDK stuffs, retired |
| # The pdk package (Platform Development Kit) |
| |
| #ifneq (,$(filter pdk,$(MAKECMDGOALS))) |
| # include development/pdk/Pdk.mk |
| #endif |
| |
| |
| # ----------------------------------------------------------------- |
| # The SDK |
| |
| # The SDK includes host-specific components, so it belongs under HOST_OUT. |
| sdk_dir := $(HOST_OUT)/sdk/$(TARGET_PRODUCT) |
| |
| # Build a name that looks like: |
| # |
| # linux-x86 --> android-sdk_12345_linux-x86 |
| # darwin-x86 --> android-sdk_12345_mac-x86 |
| # windows-x86 --> android-sdk_12345_windows |
| # |
| sdk_name := android-sdk_$(FILE_NAME_TAG) |
| ifeq ($(HOST_OS),darwin) |
| INTERNAL_SDK_HOST_OS_NAME := mac |
| else |
| INTERNAL_SDK_HOST_OS_NAME := $(HOST_OS) |
| endif |
| ifneq ($(HOST_OS),windows) |
| INTERNAL_SDK_HOST_OS_NAME := $(INTERNAL_SDK_HOST_OS_NAME)-$(SDK_HOST_ARCH) |
| endif |
| sdk_name := $(sdk_name)_$(INTERNAL_SDK_HOST_OS_NAME) |
| |
| sdk_dep_file := $(sdk_dir)/sdk_deps.mk |
| |
| ATREE_FILES := |
| -include $(sdk_dep_file) |
| |
| # if we don't have a real list, then use "everything" |
| ifeq ($(strip $(ATREE_FILES)),) |
| ATREE_FILES := \ |
| $(ALL_DEFAULT_INSTALLED_MODULES) \ |
| $(INSTALLED_RAMDISK_TARGET) \ |
| $(ALL_DOCS) \ |
| $(ALL_SDK_FILES) |
| endif |
| |
| atree_dir := development/build |
| |
| |
| sdk_atree_files := \ |
| $(atree_dir)/sdk.exclude.atree \ |
| $(atree_dir)/sdk-$(HOST_OS)-$(SDK_HOST_ARCH).atree |
| |
| # development/build/sdk-android-<abi>.atree is used to differentiate |
| # between architecture models (e.g. ARMv5TE versus ARMv7) when copying |
| # files like the kernel image. We use TARGET_CPU_ABI because we don't |
| # have a better way to distinguish between CPU models. |
| ifneq (,$(strip $(wildcard $(atree_dir)/sdk-android-$(TARGET_CPU_ABI).atree))) |
| sdk_atree_files += $(atree_dir)/sdk-android-$(TARGET_CPU_ABI).atree |
| endif |
| |
| ifneq ($(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SDK_ATREE_FILES),) |
| sdk_atree_files += $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SDK_ATREE_FILES) |
| else |
| sdk_atree_files += $(atree_dir)/sdk.atree |
| endif |
| |
| include $(BUILD_SYSTEM)/sdk_font.mk |
| |
| deps := \ |
| $(target_notice_file_txt) \ |
| $(tools_notice_file_txt) \ |
| $(OUT_DOCS)/offline-sdk-timestamp \ |
| $(SYMBOLS_ZIP) \ |
| $(COVERAGE_ZIP) \ |
| $(INSTALLED_SYSTEMIMAGE) \ |
| $(INSTALLED_QEMU_SYSTEMIMAGE) \ |
| $(INSTALLED_USERDATAIMAGE_TARGET) \ |
| $(INSTALLED_RAMDISK_TARGET) \ |
| $(INSTALLED_SDK_BUILD_PROP_TARGET) \ |
| $(INSTALLED_BUILD_PROP_TARGET) \ |
| $(ATREE_FILES) \ |
| $(sdk_atree_files) \ |
| $(HOST_OUT_EXECUTABLES)/atree \ |
| $(HOST_OUT_EXECUTABLES)/line_endings \ |
| $(SDK_FONT_DEPS) |
| |
| INTERNAL_SDK_TARGET := $(sdk_dir)/$(sdk_name).zip |
| $(INTERNAL_SDK_TARGET): PRIVATE_NAME := $(sdk_name) |
| $(INTERNAL_SDK_TARGET): PRIVATE_DIR := $(sdk_dir)/$(sdk_name) |
| $(INTERNAL_SDK_TARGET): PRIVATE_DEP_FILE := $(sdk_dep_file) |
| $(INTERNAL_SDK_TARGET): PRIVATE_INPUT_FILES := $(sdk_atree_files) |
| |
| # Set SDK_GNU_ERROR to non-empty to fail when a GNU target is built. |
| # |
| #SDK_GNU_ERROR := true |
| |
| $(INTERNAL_SDK_TARGET): $(deps) |
| @echo "Package SDK: $@" |
| $(hide) rm -rf $(PRIVATE_DIR) $@ |
| $(hide) for f in $(target_gnu_MODULES); do \ |
| if [ -f $$f ]; then \ |
| echo SDK: $(if $(SDK_GNU_ERROR),ERROR:,warning:) \ |
| including GNU target $$f >&2; \ |
| FAIL=$(SDK_GNU_ERROR); \ |
| fi; \ |
| done; \ |
| if [ $$FAIL ]; then exit 1; fi |
| $(hide) echo $(notdir $(SDK_FONT_DEPS)) | tr " " "\n" > $(SDK_FONT_TEMP)/fontsInSdk.txt |
| $(hide) ( \ |
| ATREE_STRIP="strip -x" \ |
| $(HOST_OUT_EXECUTABLES)/atree \ |
| $(addprefix -f ,$(PRIVATE_INPUT_FILES)) \ |
| -m $(PRIVATE_DEP_FILE) \ |
| -I . \ |
| -I $(PRODUCT_OUT) \ |
| -I $(HOST_OUT) \ |
| -I $(TARGET_COMMON_OUT_ROOT) \ |
| -v "PLATFORM_NAME=android-$(PLATFORM_VERSION)" \ |
| -v "OUT_DIR=$(OUT_DIR)" \ |
| -v "HOST_OUT=$(HOST_OUT)" \ |
| -v "TARGET_ARCH=$(TARGET_ARCH)" \ |
| -v "TARGET_CPU_ABI=$(TARGET_CPU_ABI)" \ |
| -v "DLL_EXTENSION=$(HOST_SHLIB_SUFFIX)" \ |
| -v "FONT_OUT=$(SDK_FONT_TEMP)" \ |
| -v "JACK_SDKTOOL_VERSION=$(JACK_SDKTOOL_VERSION)" \ |
| -o $(PRIVATE_DIR) && \ |
| cp -f $(target_notice_file_txt) \ |
| $(PRIVATE_DIR)/system-images/android-$(PLATFORM_VERSION)/$(TARGET_CPU_ABI)/NOTICE.txt && \ |
| cp -f $(tools_notice_file_txt) $(PRIVATE_DIR)/platform-tools/NOTICE.txt && \ |
| HOST_OUT_EXECUTABLES=$(HOST_OUT_EXECUTABLES) HOST_OS=$(HOST_OS) \ |
| development/build/tools/sdk_clean.sh $(PRIVATE_DIR) && \ |
| chmod -R ug+rwX $(PRIVATE_DIR) && \ |
| cd $(dir $@) && zip -rqX $(notdir $@) $(PRIVATE_NAME) \ |
| ) || ( rm -rf $(PRIVATE_DIR) $@ && exit 44 ) |
| |
| |
| # Is a Windows SDK requested? If so, we need some definitions from here |
| # in order to find the Linux SDK used to create the Windows one. |
| MAIN_SDK_NAME := $(sdk_name) |
| MAIN_SDK_DIR := $(sdk_dir) |
| MAIN_SDK_ZIP := $(INTERNAL_SDK_TARGET) |
| ifneq ($(filter win_sdk winsdk-tools,$(MAKECMDGOALS)),) |
| include $(TOPDIR)development/build/tools/windows_sdk.mk |
| endif |
| |
| # ----------------------------------------------------------------- |
| # Findbugs |
| INTERNAL_FINDBUGS_XML_TARGET := $(PRODUCT_OUT)/findbugs.xml |
| INTERNAL_FINDBUGS_HTML_TARGET := $(PRODUCT_OUT)/findbugs.html |
| $(INTERNAL_FINDBUGS_XML_TARGET): $(ALL_FINDBUGS_FILES) |
| @echo UnionBugs: $@ |
| $(hide) $(FINDBUGS_DIR)/unionBugs $(ALL_FINDBUGS_FILES) \ |
| > $@ |
| $(INTERNAL_FINDBUGS_HTML_TARGET): $(INTERNAL_FINDBUGS_XML_TARGET) |
| @echo ConvertXmlToText: $@ |
| $(hide) $(FINDBUGS_DIR)/convertXmlToText -html:fancy.xsl \ |
| $(INTERNAL_FINDBUGS_XML_TARGET) > $@ |
| |
| # ----------------------------------------------------------------- |
| # Findbugs |
| |
| # ----------------------------------------------------------------- |
| # These are some additional build tasks that need to be run. |
| ifneq ($(dont_bother),true) |
| include $(sort $(wildcard $(BUILD_SYSTEM)/tasks/*.mk)) |
| -include $(sort $(wildcard vendor/*/build/tasks/*.mk)) |
| -include $(sort $(wildcard device/*/build/tasks/*.mk)) |
| -include $(sort $(wildcard product/*/build/tasks/*.mk)) |
| # Also the project-specific tasks |
| -include $(sort $(wildcard vendor/*/*/build/tasks/*.mk)) |
| -include $(sort $(wildcard device/*/*/build/tasks/*.mk)) |
| -include $(sort $(wildcard product/*/*/build/tasks/*.mk)) |
| # Also add test specifc tasks |
| include $(sort $(wildcard platform_testing/build/tasks/*.mk)) |
| include $(sort $(wildcard test/vts/tools/build/tasks/*.mk)) |
| endif |
| |
| include $(BUILD_SYSTEM)/product-graph.mk |
| |
| # ----------------------------------------------------------------- |
| # Create SDK repository packages. Must be done after tasks/* since |
| # we need the addon rules defined. |
| ifneq ($(sdk_repo_goal),) |
| include $(TOPDIR)development/build/tools/sdk_repo.mk |
| endif |