| # Put some miscellaneous rules here |
| |
| # HACK: clear LOCAL_PATH from including last build target before calling |
| # intermedites-dir-for |
| LOCAL_PATH := $(BUILD_SYSTEM) |
| |
| # Pick a reasonable string to use to identify files. |
| ifneq "" "$(filter eng.%,$(BUILD_NUMBER))" |
| # BUILD_NUMBER has a timestamp in it, which means that |
| # it will change every time. Pick a stable value. |
| FILE_NAME_TAG := eng.$(USER) |
| else |
| FILE_NAME_TAG := $(BUILD_NUMBER) |
| endif |
| |
| # ----------------------------------------------------------------- |
| # Define rules to copy PRODUCT_COPY_FILES defined by the product. |
| # PRODUCT_COPY_FILES contains words like <source file>:<dest file>[:<owner>]. |
| # <dest file> is relative to $(PRODUCT_OUT), so it should look like, |
| # e.g., "system/etc/file.xml". |
| # The filter part means "only eval the copy-one-file rule if this |
| # src:dest pair is the first one to match the same dest" |
| #$(1): the src:dest pair |
| define check-product-copy-files |
| $(if $(filter %.apk, $(1)),$(error \ |
| Prebuilt apk found in PRODUCT_COPY_FILES: $(1), use BUILD_PREBUILT instead!)) |
| endef |
| # filter out the duplicate <source file>:<dest file> pairs. |
| unique_product_copy_files_pairs := |
| $(foreach cf,$(PRODUCT_COPY_FILES), \ |
| $(if $(filter $(unique_product_copy_files_pairs),$(cf)),,\ |
| $(eval unique_product_copy_files_pairs += $(cf)))) |
| unique_product_copy_files_destinations := |
| $(foreach cf,$(unique_product_copy_files_pairs), \ |
| $(eval _src := $(call word-colon,1,$(cf))) \ |
| $(eval _dest := $(call word-colon,2,$(cf))) \ |
| $(call check-product-copy-files,$(cf)) \ |
| $(if $(filter $(unique_product_copy_files_destinations),$(_dest)), \ |
| $(info PRODUCT_COPY_FILES $(cf) ignored.), \ |
| $(eval _fulldest := $(call append-path,$(PRODUCT_OUT),$(_dest))) \ |
| $(if $(filter %.xml,$(_dest)),\ |
| $(eval $(call copy-xml-file-checked,$(_src),$(_fulldest))),\ |
| $(eval $(call copy-one-file,$(_src),$(_fulldest)))) \ |
| $(eval ALL_DEFAULT_INSTALLED_MODULES += $(_fulldest)) \ |
| $(eval unique_product_copy_files_destinations += $(_dest)))) |
| unique_product_copy_files_pairs := |
| unique_product_copy_files_destinations := |
| |
| # ----------------------------------------------------------------- |
| # docs/index.html |
| ifeq (,$(TARGET_BUILD_APPS)) |
| gen := $(OUT_DOCS)/index.html |
| ALL_DOCS += $(gen) |
| $(gen): frameworks/base/docs/docs-redirect-index.html |
| @mkdir -p $(dir $@) |
| @cp -f $< $@ |
| endif |
| |
| # ----------------------------------------------------------------- |
| # default.prop |
| INSTALLED_DEFAULT_PROP_TARGET := $(TARGET_ROOT_OUT)/default.prop |
| ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_DEFAULT_PROP_TARGET) |
| ADDITIONAL_DEFAULT_PROPERTIES := \ |
| $(call collapse-pairs, $(ADDITIONAL_DEFAULT_PROPERTIES)) |
| ADDITIONAL_DEFAULT_PROPERTIES += \ |
| $(call collapse-pairs, $(PRODUCT_DEFAULT_PROPERTY_OVERRIDES)) |
| ADDITIONAL_DEFAULT_PROPERTIES := $(call uniq-pairs-by-first-component, \ |
| $(ADDITIONAL_DEFAULT_PROPERTIES),=) |
| |
| $(INSTALLED_DEFAULT_PROP_TARGET): |
| @echo Target buildinfo: $@ |
| @mkdir -p $(dir $@) |
| $(hide) echo "#" > $@; \ |
| echo "# ADDITIONAL_DEFAULT_PROPERTIES" >> $@; \ |
| echo "#" >> $@; |
| $(hide) $(foreach line,$(ADDITIONAL_DEFAULT_PROPERTIES), \ |
| echo "$(line)" >> $@;) |
| build/tools/post_process_props.py $@ |
| |
| # ----------------------------------------------------------------- |
| # build.prop |
| INSTALLED_BUILD_PROP_TARGET := $(TARGET_OUT)/build.prop |
| ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_BUILD_PROP_TARGET) |
| ADDITIONAL_BUILD_PROPERTIES := \ |
| $(call collapse-pairs, $(ADDITIONAL_BUILD_PROPERTIES)) |
| ADDITIONAL_BUILD_PROPERTIES := $(call uniq-pairs-by-first-component, \ |
| $(ADDITIONAL_BUILD_PROPERTIES),=) |
| |
| # A list of arbitrary tags describing the build configuration. |
| # Force ":=" so we can use += |
| BUILD_VERSION_TAGS := $(BUILD_VERSION_TAGS) |
| ifeq ($(TARGET_BUILD_TYPE),debug) |
| BUILD_VERSION_TAGS += debug |
| endif |
| # The "test-keys" tag marks builds signed with the old test keys, |
| # which are available in the SDK. "dev-keys" marks builds signed with |
| # non-default dev keys (usually private keys from a vendor directory). |
| # Both of these tags will be removed and replaced with "release-keys" |
| # when the target-files is signed in a post-build step. |
| ifeq ($(DEFAULT_SYSTEM_DEV_CERTIFICATE),build/target/product/security/testkey) |
| BUILD_KEYS := test-keys |
| else |
| BUILD_KEYS := dev-keys |
| endif |
| BUILD_VERSION_TAGS += $(BUILD_KEYS) |
| BUILD_VERSION_TAGS := $(subst $(space),$(comma),$(sort $(BUILD_VERSION_TAGS))) |
| |
| # A human-readable string that descibes this build in detail. |
| build_desc := $(TARGET_PRODUCT)-$(TARGET_BUILD_VARIANT) $(PLATFORM_VERSION) $(BUILD_ID) $(BUILD_NUMBER) $(BUILD_VERSION_TAGS) |
| $(INSTALLED_BUILD_PROP_TARGET): PRIVATE_BUILD_DESC := $(build_desc) |
| |
| # The string used to uniquely identify this build; used by the OTA server. |
| ifeq (,$(strip $(BUILD_FINGERPRINT))) |
| BUILD_FINGERPRINT := $(PRODUCT_BRAND)/$(TARGET_PRODUCT)/$(TARGET_DEVICE):$(PLATFORM_VERSION)/$(BUILD_ID)/$(BUILD_NUMBER):$(TARGET_BUILD_VARIANT)/$(BUILD_VERSION_TAGS) |
| endif |
| ifneq ($(words $(BUILD_FINGERPRINT)),1) |
| $(error BUILD_FINGERPRINT cannot contain spaces: "$(BUILD_FINGERPRINT)") |
| endif |
| |
| # Display parameters shown under Settings -> About Phone |
| ifeq ($(TARGET_BUILD_VARIANT),user) |
| # User builds should show: |
| # release build number or branch.buld_number non-release builds |
| |
| # Dev. branches should have DISPLAY_BUILD_NUMBER set |
| ifeq "true" "$(DISPLAY_BUILD_NUMBER)" |
| BUILD_DISPLAY_ID := $(BUILD_ID).$(BUILD_NUMBER) $(BUILD_KEYS) |
| else |
| BUILD_DISPLAY_ID := $(BUILD_ID) $(BUILD_KEYS) |
| endif |
| else |
| # Non-user builds should show detailed build information |
| BUILD_DISPLAY_ID := $(build_desc) |
| endif |
| |
| # Whether there is default locale set in PRODUCT_PROPERTY_OVERRIDES |
| product_property_override_locale_language := $(strip \ |
| $(patsubst ro.product.locale.language=%,%,\ |
| $(filter ro.product.locale.language=%,$(PRODUCT_PROPERTY_OVERRIDES)))) |
| product_property_overrides_locale_region := $(strip \ |
| $(patsubst ro.product.locale.region=%,%,\ |
| $(filter ro.product.locale.region=%,$(PRODUCT_PROPERTY_OVERRIDES)))) |
| |
| # Selects the first locale in the list given as the argument, |
| # and splits it into language and region, which each may be |
| # empty. |
| define default-locale |
| $(subst _, , $(firstword $(1))) |
| endef |
| |
| # Selects the first locale in the list given as the argument |
| # and returns the language (or the region), if it's not set in PRODUCT_PROPERTY_OVERRIDES; |
| # Return empty string if it's already set in PRODUCT_PROPERTY_OVERRIDES. |
| define default-locale-language |
| $(if $(product_property_override_locale_language),,$(word 1, $(call default-locale, $(1)))) |
| endef |
| define default-locale-region |
| $(if $(product_property_overrides_locale_region),,$(word 2, $(call default-locale, $(1)))) |
| endef |
| |
| BUILDINFO_SH := build/tools/buildinfo.sh |
| |
| ifdef TARGET_SYSTEM_PROP |
| system_prop_file := $(TARGET_SYSTEM_PROP) |
| else |
| system_prop_file := $(wildcard $(TARGET_DEVICE_DIR)/system.prop) |
| endif |
| |
| $(INSTALLED_BUILD_PROP_TARGET): $(BUILDINFO_SH) $(INTERNAL_BUILD_ID_MAKEFILE) $(BUILD_SYSTEM)/version_defaults.mk $(system_prop_file) |
| @echo Target buildinfo: $@ |
| @mkdir -p $(dir $@) |
| $(hide) TARGET_BUILD_TYPE="$(TARGET_BUILD_VARIANT)" \ |
| TARGET_DEVICE="$(TARGET_DEVICE)" \ |
| PRODUCT_NAME="$(TARGET_PRODUCT)" \ |
| PRODUCT_BRAND="$(PRODUCT_BRAND)" \ |
| PRODUCT_DEFAULT_LANGUAGE="$(call default-locale-language,$(PRODUCT_LOCALES))" \ |
| PRODUCT_DEFAULT_REGION="$(call default-locale-region,$(PRODUCT_LOCALES))" \ |
| PRODUCT_DEFAULT_WIFI_CHANNELS="$(PRODUCT_DEFAULT_WIFI_CHANNELS)" \ |
| PRODUCT_MODEL="$(PRODUCT_MODEL)" \ |
| PRODUCT_MANUFACTURER="$(PRODUCT_MANUFACTURER)" \ |
| PRIVATE_BUILD_DESC="$(PRIVATE_BUILD_DESC)" \ |
| BUILD_ID="$(BUILD_ID)" \ |
| BUILD_DISPLAY_ID="$(BUILD_DISPLAY_ID)" \ |
| BUILD_NUMBER="$(BUILD_NUMBER)" \ |
| PLATFORM_VERSION="$(PLATFORM_VERSION)" \ |
| PLATFORM_SDK_VERSION="$(PLATFORM_SDK_VERSION)" \ |
| PLATFORM_VERSION_CODENAME="$(PLATFORM_VERSION_CODENAME)" \ |
| BUILD_VERSION_TAGS="$(BUILD_VERSION_TAGS)" \ |
| TARGET_BOOTLOADER_BOARD_NAME="$(TARGET_BOOTLOADER_BOARD_NAME)" \ |
| BUILD_FINGERPRINT="$(BUILD_FINGERPRINT)" \ |
| TARGET_BOARD_PLATFORM="$(TARGET_BOARD_PLATFORM)" \ |
| TARGET_CPU_ABI_LIST="$(TARGET_CPU_ABI_LIST)" \ |
| TARGET_CPU_ABI_LIST_32_BIT="$(TARGET_CPU_ABI_LIST_32_BIT)" \ |
| TARGET_CPU_ABI_LIST_64_BIT="$(TARGET_CPU_ABI_LIST_64_BIT)" \ |
| TARGET_CPU_ABI="$(TARGET_CPU_ABI)" \ |
| TARGET_CPU_ABI2="$(TARGET_CPU_ABI2)" \ |
| TARGET_AAPT_CHARACTERISTICS="$(TARGET_AAPT_CHARACTERISTICS)" \ |
| bash $(BUILDINFO_SH) > $@ |
| $(hide) $(foreach file,$(system_prop_file), \ |
| if [ -f "$(file)" ]; then \ |
| echo "#" >> $@; \ |
| echo Target buildinfo from: "$(file)"; \ |
| echo "# from $(file)" >> $@; \ |
| echo "#" >> $@; \ |
| cat $(file) >> $@; \ |
| fi;) |
| $(if $(ADDITIONAL_BUILD_PROPERTIES), \ |
| $(hide) echo >> $@; \ |
| echo "#" >> $@; \ |
| echo "# ADDITIONAL_BUILD_PROPERTIES" >> $@; \ |
| echo "#" >> $@; ) |
| $(hide) $(foreach line,$(ADDITIONAL_BUILD_PROPERTIES), \ |
| echo "$(line)" >> $@;) |
| $(hide) build/tools/post_process_props.py $@ |
| |
| build_desc := |
| |
| # ----------------------------------------------------------------- |
| # sdk-build.prop |
| # |
| # There are certain things in build.prop that we don't want to |
| # ship with the sdk; remove them. |
| |
| # This must be a list of entire property keys followed by |
| # "=" characters, without any internal spaces. |
| sdk_build_prop_remove := \ |
| ro.build.user= \ |
| ro.build.host= \ |
| ro.product.brand= \ |
| ro.product.manufacturer= \ |
| ro.product.device= |
| # TODO: Remove this soon-to-be obsolete property |
| sdk_build_prop_remove += ro.build.product= |
| INSTALLED_SDK_BUILD_PROP_TARGET := $(PRODUCT_OUT)/sdk/sdk-build.prop |
| $(INSTALLED_SDK_BUILD_PROP_TARGET): $(INSTALLED_BUILD_PROP_TARGET) |
| @echo SDK buildinfo: $@ |
| @mkdir -p $(dir $@) |
| $(hide) grep -v "$(subst $(space),\|,$(strip \ |
| $(sdk_build_prop_remove)))" $< > $@.tmp |
| $(hide) for x in $(sdk_build_prop_remove); do \ |
| echo "$$x"generic >> $@.tmp; done |
| $(hide) mv $@.tmp $@ |
| |
| # ----------------------------------------------------------------- |
| # package stats |
| PACKAGE_STATS_FILE := $(PRODUCT_OUT)/package-stats.txt |
| PACKAGES_TO_STAT := \ |
| $(sort $(filter $(TARGET_OUT)/% $(TARGET_OUT_DATA)/%, \ |
| $(filter %.jar %.apk, $(ALL_DEFAULT_INSTALLED_MODULES)))) |
| $(PACKAGE_STATS_FILE): $(PACKAGES_TO_STAT) |
| @echo Package stats: $@ |
| @mkdir -p $(dir $@) |
| $(hide) rm -f $@ |
| $(hide) build/tools/dump-package-stats $^ > $@ |
| |
| .PHONY: package-stats |
| package-stats: $(PACKAGE_STATS_FILE) |
| |
| # ----------------------------------------------------------------- |
| # Cert-to-package mapping. Used by the post-build signing tools. |
| # Use a macro to add newline to each echo command |
| define _apkcerts_echo_with_newline |
| $(hide) echo $(1) |
| |
| endef |
| |
| name := $(TARGET_PRODUCT) |
| ifeq ($(TARGET_BUILD_TYPE),debug) |
| name := $(name)_debug |
| endif |
| name := $(name)-apkcerts-$(FILE_NAME_TAG) |
| intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,apkcerts) |
| APKCERTS_FILE := $(intermediates)/$(name).txt |
| # We don't need to really build all the modules. |
| # TODO: rebuild APKCERTS_FILE if any app change its cert. |
| $(APKCERTS_FILE): |
| @echo APK certs list: $@ |
| @mkdir -p $(dir $@) |
| @rm -f $@ |
| $(foreach p,$(PACKAGES),\ |
| $(if $(PACKAGES.$(p).EXTERNAL_KEY),\ |
| $(call _apkcerts_echo_with_newline,\ |
| 'name="$(p).apk" certificate="EXTERNAL" \ |
| private_key=""' >> $@),\ |
| $(call _apkcerts_echo_with_newline,\ |
| 'name="$(p).apk" certificate="$(PACKAGES.$(p).CERTIFICATE)" \ |
| private_key="$(PACKAGES.$(p).PRIVATE_KEY)"' >> $@))) |
| # In case value of PACKAGES is empty. |
| $(hide) touch $@ |
| |
| .PHONY: apkcerts-list |
| apkcerts-list: $(APKCERTS_FILE) |
| |
| ifneq (,$(TARGET_BUILD_APPS)) |
| $(call dist-for-goals, apps_only, $(APKCERTS_FILE):apkcerts.txt) |
| endif |
| |
| # ----------------------------------------------------------------- |
| # module info file |
| ifdef CREATE_MODULE_INFO_FILE |
| MODULE_INFO_FILE := $(PRODUCT_OUT)/module-info.txt |
| $(info Generating $(MODULE_INFO_FILE)...) |
| $(shell rm -f $(MODULE_INFO_FILE)) |
| $(foreach m,$(ALL_MODULES), \ |
| $(shell echo "NAME=\"$(m)\"" \ |
| "PATH=\"$(strip $(ALL_MODULES.$(m).PATH))\"" \ |
| "TAGS=\"$(strip $(filter-out _%,$(ALL_MODULES.$(m).TAGS)))\"" \ |
| "BUILT=\"$(strip $(ALL_MODULES.$(m).BUILT))\"" \ |
| "INSTALLED=\"$(strip $(ALL_MODULES.$(m).INSTALLED))\"" >> $(MODULE_INFO_FILE))) |
| endif |
| |
| # ----------------------------------------------------------------- |
| |
| # The dev key is used to sign this package, and as the key required |
| # for future OTA packages installed by this system. Actual product |
| # deliverables will be re-signed by hand. We expect this file to |
| # exist with the suffixes ".x509.pem" and ".pk8". |
| DEFAULT_KEY_CERT_PAIR := $(DEFAULT_SYSTEM_DEV_CERTIFICATE) |
| |
| |
| # Rules that need to be present for the all targets, even |
| # if they don't do anything. |
| .PHONY: systemimage |
| systemimage: |
| |
| # ----------------------------------------------------------------- |
| |
| .PHONY: event-log-tags |
| |
| # Produce an event logs tag file for everything we know about, in order |
| # to properly allocate numbers. Then produce a file that's filtered |
| # for what's going to be installed. |
| |
| all_event_log_tags_file := $(TARGET_OUT_COMMON_INTERMEDIATES)/all-event-log-tags.txt |
| |
| event_log_tags_file := $(TARGET_OUT)/etc/event-log-tags |
| |
| # Include tags from all packages that we know about |
| all_event_log_tags_src := \ |
| $(sort $(foreach m, $(ALL_MODULES), $(ALL_MODULES.$(m).EVENT_LOG_TAGS))) |
| |
| # PDK builds will already have a full list of tags that needs to get merged |
| # in with the ones from source |
| pdk_fusion_log_tags_file := $(patsubst $(PRODUCT_OUT)/%,$(_pdk_fusion_intermediates)/%,$(filter $(event_log_tags_file),$(ALL_PDK_FUSION_FILES))) |
| |
| $(all_event_log_tags_file): PRIVATE_SRC_FILES := $(all_event_log_tags_src) $(pdk_fusion_log_tags_file) |
| $(all_event_log_tags_file): $(all_event_log_tags_src) $(pdk_fusion_log_tags_file) |
| $(hide) mkdir -p $(dir $@) |
| $(hide) build/tools/merge-event-log-tags.py -o $@ $(PRIVATE_SRC_FILES) |
| |
| # Include tags from all packages included in this product, plus all |
| # tags that are part of the system (ie, not in a vendor/ or device/ |
| # directory). |
| event_log_tags_src := \ |
| $(sort $(foreach m,\ |
| $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES) \ |
| $(call module-names-for-tag-list,user), \ |
| $(ALL_MODULES.$(m).EVENT_LOG_TAGS)) \ |
| $(filter-out vendor/% device/% out/%,$(all_event_log_tags_src))) |
| |
| $(event_log_tags_file): PRIVATE_SRC_FILES := $(event_log_tags_src) $(pdk_fusion_log_tags_file) |
| $(event_log_tags_file): PRIVATE_MERGED_FILE := $(all_event_log_tags_file) |
| $(event_log_tags_file): $(event_log_tags_src) $(all_event_log_tags_file) $(pdk_fusion_log_tags_file) |
| $(hide) mkdir -p $(dir $@) |
| $(hide) build/tools/merge-event-log-tags.py -o $@ -m $(PRIVATE_MERGED_FILE) $(PRIVATE_SRC_FILES) |
| |
| event-log-tags: $(event_log_tags_file) |
| |
| ALL_DEFAULT_INSTALLED_MODULES += $(event_log_tags_file) |
| |
| |
| # ################################################################# |
| # Targets for boot/OS images |
| # ################################################################# |
| ifneq ($(strip $(TARGET_NO_BOOTLOADER)),true) |
| INSTALLED_BOOTLOADER_MODULE := $(PRODUCT_OUT)/bootloader |
| ifeq ($(strip $(TARGET_BOOTLOADER_IS_2ND)),true) |
| INSTALLED_2NDBOOTLOADER_TARGET := $(PRODUCT_OUT)/2ndbootloader |
| else |
| INSTALLED_2NDBOOTLOADER_TARGET := |
| endif |
| else |
| INSTALLED_BOOTLOADER_MODULE := |
| INSTALLED_2NDBOOTLOADER_TARGET := |
| endif # TARGET_NO_BOOTLOADER |
| ifneq ($(strip $(TARGET_NO_KERNEL)),true) |
| INSTALLED_KERNEL_TARGET := $(PRODUCT_OUT)/kernel |
| else |
| INSTALLED_KERNEL_TARGET := |
| endif |
| |
| # ----------------------------------------------------------------- |
| # the ramdisk |
| INTERNAL_RAMDISK_FILES := $(filter $(TARGET_ROOT_OUT)/%, \ |
| $(ALL_PREBUILT) \ |
| $(ALL_COPIED_HEADERS) \ |
| $(ALL_GENERATED_SOURCES) \ |
| $(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| BUILT_RAMDISK_TARGET := $(PRODUCT_OUT)/ramdisk.img |
| |
| # We just build this directly to the install location. |
| INSTALLED_RAMDISK_TARGET := $(BUILT_RAMDISK_TARGET) |
| $(INSTALLED_RAMDISK_TARGET): $(MKBOOTFS) $(INTERNAL_RAMDISK_FILES) | $(MINIGZIP) |
| $(call pretty,"Target ram disk: $@") |
| $(hide) $(MKBOOTFS) $(TARGET_ROOT_OUT) | $(MINIGZIP) > $@ |
| |
| .PHONY: ramdisk-nodeps |
| ramdisk-nodeps: $(MKBOOTFS) | $(MINIGZIP) |
| @echo "make $@: ignoring dependencies" |
| $(hide) $(MKBOOTFS) $(TARGET_ROOT_OUT) | $(MINIGZIP) > $(INSTALLED_RAMDISK_TARGET) |
| |
| ifneq ($(strip $(TARGET_NO_KERNEL)),true) |
| |
| # ----------------------------------------------------------------- |
| # the boot image, which is a collection of other images. |
| INTERNAL_BOOTIMAGE_ARGS := \ |
| $(addprefix --second ,$(INSTALLED_2NDBOOTLOADER_TARGET)) \ |
| --kernel $(INSTALLED_KERNEL_TARGET) \ |
| --ramdisk $(INSTALLED_RAMDISK_TARGET) |
| |
| INTERNAL_BOOTIMAGE_FILES := $(filter-out --%,$(INTERNAL_BOOTIMAGE_ARGS)) |
| |
| BOARD_KERNEL_CMDLINE := $(strip $(BOARD_KERNEL_CMDLINE)) |
| ifdef BOARD_KERNEL_CMDLINE |
| INTERNAL_BOOTIMAGE_ARGS += --cmdline "$(BOARD_KERNEL_CMDLINE)" |
| endif |
| |
| BOARD_KERNEL_BASE := $(strip $(BOARD_KERNEL_BASE)) |
| ifdef BOARD_KERNEL_BASE |
| INTERNAL_BOOTIMAGE_ARGS += --base $(BOARD_KERNEL_BASE) |
| endif |
| |
| BOARD_KERNEL_PAGESIZE := $(strip $(BOARD_KERNEL_PAGESIZE)) |
| ifdef BOARD_KERNEL_PAGESIZE |
| INTERNAL_BOOTIMAGE_ARGS += --pagesize $(BOARD_KERNEL_PAGESIZE) |
| endif |
| |
| INSTALLED_BOOTIMAGE_TARGET := $(PRODUCT_OUT)/boot.img |
| |
| ifeq ($(TARGET_BOOTIMAGE_USE_EXT2),true) |
| tmp_dir_for_image := $(call intermediates-dir-for,EXECUTABLES,boot_img)/bootimg |
| INTERNAL_BOOTIMAGE_ARGS += --tmpdir $(tmp_dir_for_image) |
| INTERNAL_BOOTIMAGE_ARGS += --genext2fs $(MKEXT2IMG) |
| $(INSTALLED_BOOTIMAGE_TARGET): $(MKEXT2IMG) $(INTERNAL_BOOTIMAGE_FILES) |
| $(call pretty,"Target boot image: $@") |
| $(hide) $(MKEXT2BOOTIMG) $(INTERNAL_BOOTIMAGE_ARGS) --output $@ |
| |
| .PHONY: bootimage-nodeps |
| bootimage-nodeps: $(MKEXT2IMG) |
| @echo "make $@: ignoring dependencies" |
| $(hide) $(MKEXT2BOOTIMG) $(INTERNAL_BOOTIMAGE_ARGS) --output $(INSTALLED_BOOTIMAGE_TARGET) |
| |
| else # TARGET_BOOTIMAGE_USE_EXT2 != true |
| |
| $(INSTALLED_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_FILES) |
| $(call pretty,"Target boot image: $@") |
| $(hide) $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $@ |
| $(hide) $(call assert-max-image-size,$@,$(BOARD_BOOTIMAGE_PARTITION_SIZE),raw) |
| |
| .PHONY: bootimage-nodeps |
| bootimage-nodeps: $(MKBOOTIMG) |
| @echo "make $@: ignoring dependencies" |
| $(hide) $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $(INSTALLED_BOOTIMAGE_TARGET) |
| $(hide) $(call assert-max-image-size,$(INSTALLED_BOOTIMAGE_TARGET),$(BOARD_BOOTIMAGE_PARTITION_SIZE),raw) |
| |
| endif # TARGET_BOOTIMAGE_USE_EXT2 |
| |
| else # TARGET_NO_KERNEL |
| # HACK: The top-level targets depend on the bootimage. Not all targets |
| # can produce a bootimage, though, and emulator targets need the ramdisk |
| # instead. Fake it out by calling the ramdisk the bootimage. |
| # TODO: make the emulator use bootimages, and make mkbootimg accept |
| # kernel-less inputs. |
| INSTALLED_BOOTIMAGE_TARGET := $(INSTALLED_RAMDISK_TARGET) |
| endif |
| |
| # ----------------------------------------------------------------- |
| # NOTICE files |
| # |
| # We are required to publish the licenses for all code under BSD, GPL and |
| # Apache licenses (and possibly other more exotic ones as well). We err on the |
| # side of caution, so the licenses for other third-party code are included here |
| # too. |
| # |
| # This needs to be before the systemimage rules, because it adds to |
| # ALL_DEFAULT_INSTALLED_MODULES, which those use to pick which files |
| # go into the systemimage. |
| |
| .PHONY: notice_files |
| |
| # Create the rule to combine the files into text and html forms |
| # $(1) - Plain text output file |
| # $(2) - HTML output file |
| # $(3) - File title |
| # $(4) - Directory to use. Notice files are all $(4)/src. Other |
| # directories in there will be used for scratch |
| # $(5) - Dependencies for the output files |
| # |
| # The algorithm here is that we go collect a hash for each of the notice |
| # files and write the names of the files that match that hash. Then |
| # to generate the real files, we go print out all of the files and their |
| # hashes. |
| # |
| # These rules are fairly complex, so they depend on this makefile so if |
| # it changes, they'll run again. |
| # |
| # TODO: We could clean this up so that we just record the locations of the |
| # original notice files instead of making rules to copy them somwehere. |
| # Then we could traverse that without quite as much bash drama. |
| define combine-notice-files |
| $(1) $(2): PRIVATE_MESSAGE := $(3) |
| $(1) $(2): PRIVATE_DIR := $(4) |
| $(1) : $(2) |
| $(2) : $(5) $(BUILD_SYSTEM)/Makefile build/tools/generate-notice-files.py |
| build/tools/generate-notice-files.py $(1) $(2) $$(PRIVATE_MESSAGE) $$(PRIVATE_DIR)/src |
| notice_files: $(1) $(2) |
| endef |
| |
| # TODO These intermediate NOTICE.txt/NOTICE.html files should go into |
| # TARGET_OUT_NOTICE_FILES now that the notice files are gathered from |
| # the src subdirectory. |
| |
| target_notice_file_txt := $(TARGET_OUT_INTERMEDIATES)/NOTICE.txt |
| target_notice_file_html := $(TARGET_OUT_INTERMEDIATES)/NOTICE.html |
| target_notice_file_html_gz := $(TARGET_OUT_INTERMEDIATES)/NOTICE.html.gz |
| tools_notice_file_txt := $(HOST_OUT_INTERMEDIATES)/NOTICE.txt |
| tools_notice_file_html := $(HOST_OUT_INTERMEDIATES)/NOTICE.html |
| |
| ifndef TARGET_BUILD_APPS |
| kernel_notice_file := $(TARGET_OUT_NOTICE_FILES)/src/kernel.txt |
| pdk_fusion_notice_files := $(filter $(TARGET_OUT_NOTICE_FILES)/%, $(ALL_PDK_FUSION_FILES)) |
| |
| $(eval $(call combine-notice-files, \ |
| $(target_notice_file_txt), \ |
| $(target_notice_file_html), \ |
| "Notices for files contained in the filesystem images in this directory:", \ |
| $(TARGET_OUT_NOTICE_FILES), \ |
| $(ALL_DEFAULT_INSTALLED_MODULES) $(kernel_notice_file) $(pdk_fusion_notice_files))) |
| |
| $(eval $(call combine-notice-files, \ |
| $(tools_notice_file_txt), \ |
| $(tools_notice_file_html), \ |
| "Notices for files contained in the tools directory:", \ |
| $(HOST_OUT_NOTICE_FILES), \ |
| $(ALL_DEFAULT_INSTALLED_MODULES))) |
| |
| # Install the html file at /system/etc/NOTICE.html.gz. |
| # This is not ideal, but this is very late in the game, after a lot of |
| # the module processing has already been done -- in fact, we used the |
| # fact that all that has been done to get the list of modules that we |
| # need notice files for. |
| $(target_notice_file_html_gz): $(target_notice_file_html) | $(MINIGZIP) |
| $(hide) $(MINIGZIP) -9 < $< > $@ |
| installed_notice_html_gz := $(TARGET_OUT)/etc/NOTICE.html.gz |
| $(installed_notice_html_gz): $(target_notice_file_html_gz) | $(ACP) |
| $(copy-file-to-target) |
| |
| # if we've been run my mm, mmm, etc, don't reinstall this every time |
| ifeq ($(ONE_SHOT_MAKEFILE),) |
| ALL_DEFAULT_INSTALLED_MODULES += $(installed_notice_html_gz) |
| endif |
| endif # TARGET_BUILD_APPS |
| |
| # The kernel isn't really a module, so to get its module file in there, we |
| # make the target NOTICE files depend on this particular file too, which will |
| # then be in the right directory for the find in combine-notice-files to work. |
| $(kernel_notice_file): \ |
| prebuilts/qemu-kernel/arm/LINUX_KERNEL_COPYING \ |
| | $(ACP) |
| @echo Copying: $@ |
| $(hide) mkdir -p $(dir $@) |
| $(hide) $(ACP) $< $@ |
| |
| |
| # ----------------------------------------------------------------- |
| # Build a keystore with the authorized keys in it, used to verify the |
| # authenticity of downloaded OTA packages. |
| # |
| # This rule adds to ALL_DEFAULT_INSTALLED_MODULES, so it needs to come |
| # before the rules that use that variable to build the image. |
| ALL_DEFAULT_INSTALLED_MODULES += $(TARGET_OUT_ETC)/security/otacerts.zip |
| $(TARGET_OUT_ETC)/security/otacerts.zip: KEY_CERT_PAIR := $(DEFAULT_KEY_CERT_PAIR) |
| $(TARGET_OUT_ETC)/security/otacerts.zip: $(addsuffix .x509.pem,$(DEFAULT_KEY_CERT_PAIR)) |
| $(hide) rm -f $@ |
| $(hide) mkdir -p $(dir $@) |
| $(hide) zip -qj $@ $< |
| |
| .PHONY: otacerts |
| otacerts: $(TARGET_OUT_ETC)/security/otacerts.zip |
| |
| |
| # ################################################################# |
| # Targets for user images |
| # ################################################################# |
| |
| INTERNAL_USERIMAGES_EXT_VARIANT := |
| ifeq ($(TARGET_USERIMAGES_USE_EXT2),true) |
| INTERNAL_USERIMAGES_USE_EXT := true |
| INTERNAL_USERIMAGES_EXT_VARIANT := ext2 |
| else |
| ifeq ($(TARGET_USERIMAGES_USE_EXT3),true) |
| INTERNAL_USERIMAGES_USE_EXT := true |
| INTERNAL_USERIMAGES_EXT_VARIANT := ext3 |
| else |
| ifeq ($(TARGET_USERIMAGES_USE_EXT4),true) |
| INTERNAL_USERIMAGES_USE_EXT := true |
| INTERNAL_USERIMAGES_EXT_VARIANT := ext4 |
| endif |
| endif |
| endif |
| |
| ifneq (true,$(TARGET_USERIMAGES_SPARSE_EXT_DISABLED)) |
| INTERNAL_USERIMAGES_SPARSE_EXT_FLAG := -s |
| endif |
| |
| ifeq ($(INTERNAL_USERIMAGES_USE_EXT),true) |
| INTERNAL_USERIMAGES_DEPS := $(MKEXTUSERIMG) $(MAKE_EXT4FS) $(SIMG2IMG) $(E2FSCK) |
| else |
| INTERNAL_USERIMAGES_DEPS := $(MKYAFFS2) |
| endif |
| INTERNAL_USERIMAGES_BINARY_PATHS := $(sort $(dir $(INTERNAL_USERIMAGES_DEPS))) |
| |
| SELINUX_FC := $(TARGET_ROOT_OUT)/file_contexts |
| INTERNAL_USERIMAGES_DEPS += $(SELINUX_FC) |
| |
| # $(1): the path of the output dictionary file |
| # $(2): additional "key=value" pairs to append to the dictionary file. |
| define generate-userimage-prop-dictionary |
| $(if $(INTERNAL_USERIMAGES_EXT_VARIANT),$(hide) echo "fs_type=$(INTERNAL_USERIMAGES_EXT_VARIANT)" >> $(1)) |
| $(if $(BOARD_SYSTEMIMAGE_PARTITION_SIZE),$(hide) echo "system_size=$(BOARD_SYSTEMIMAGE_PARTITION_SIZE)" >> $(1)) |
| $(if $(BOARD_USERDATAIMAGE_PARTITION_SIZE),$(hide) echo "userdata_size=$(BOARD_USERDATAIMAGE_PARTITION_SIZE)" >> $(1)) |
| $(if $(BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "cache_fs_type=$(BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE)" >> $(1)) |
| $(if $(BOARD_CACHEIMAGE_PARTITION_SIZE),$(hide) echo "cache_size=$(BOARD_CACHEIMAGE_PARTITION_SIZE)" >> $(1)) |
| $(if $(BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "vendor_fs_type=$(BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE)" >> $(1)) |
| $(if $(BOARD_VENDORIMAGE_PARTITION_SIZE),$(hide) echo "vendor_size=$(BOARD_VENDORIMAGE_PARTITION_SIZE)" >> $(1)) |
| $(if $(INTERNAL_USERIMAGES_SPARSE_EXT_FLAG),$(hide) echo "extfs_sparse_flag=$(INTERNAL_USERIMAGES_SPARSE_EXT_FLAG)" >> $(1)) |
| $(if $(mkyaffs2_extra_flags),$(hide) echo "mkyaffs2_extra_flags=$(mkyaffs2_extra_flags)" >> $(1)) |
| $(hide) echo "selinux_fc=$(SELINUX_FC)" >> $(1) |
| $(if $(2),$(hide) $(foreach kv,$(2),echo "$(kv)" >> $(1);)) |
| endef |
| |
| # ----------------------------------------------------------------- |
| # Recovery image |
| |
| # If neither TARGET_NO_KERNEL nor TARGET_NO_RECOVERY are true |
| ifeq (,$(filter true, $(TARGET_NO_KERNEL) $(TARGET_NO_RECOVERY))) |
| |
| INSTALLED_RECOVERYIMAGE_TARGET := $(PRODUCT_OUT)/recovery.img |
| |
| recovery_initrc := $(call include-path-for, recovery)/etc/init.rc |
| recovery_sepolicy := $(call intermediates-dir-for,ETC,sepolicy.recovery)/sepolicy.recovery |
| recovery_kernel := $(INSTALLED_KERNEL_TARGET) # same as a non-recovery system |
| recovery_ramdisk := $(PRODUCT_OUT)/ramdisk-recovery.img |
| recovery_build_prop := $(INSTALLED_BUILD_PROP_TARGET) |
| recovery_binary := $(call intermediates-dir-for,EXECUTABLES,recovery)/recovery |
| recovery_resources_common := $(call include-path-for, recovery)/res |
| |
| # Select the 18x32 font on high-density devices; and the 12x22 font on |
| # other devices. Note that the font selected here can be overridden |
| # for a particular device by putting a font.png in its private |
| # recovery resources. |
| ifneq (,$(filter xxhdpi xhdpi,$(subst $(comma),$(space),$(PRODUCT_AAPT_CONFIG)))) |
| recovery_font := $(call include-path-for, recovery)/fonts/18x32.png |
| else |
| recovery_font := $(call include-path-for, recovery)/fonts/12x22.png |
| endif |
| |
| recovery_resources_private := $(strip $(wildcard $(TARGET_DEVICE_DIR)/recovery/res)) |
| recovery_resource_deps := $(shell find $(recovery_resources_common) \ |
| $(recovery_resources_private) -type f) |
| ifdef TARGET_RECOVERY_FSTAB |
| recovery_fstab := $(TARGET_RECOVERY_FSTAB) |
| else |
| recovery_fstab := $(strip $(wildcard $(TARGET_DEVICE_DIR)/recovery.fstab)) |
| endif |
| # Named '.dat' so we don't attempt to use imgdiff for patching it. |
| RECOVERY_RESOURCE_ZIP := $(TARGET_OUT)/etc/recovery-resource.dat |
| |
| ifeq ($(recovery_resources_private),) |
| $(info No private recovery resources for TARGET_DEVICE $(TARGET_DEVICE)) |
| endif |
| |
| ifeq ($(recovery_fstab),) |
| $(info No recovery.fstab for TARGET_DEVICE $(TARGET_DEVICE)) |
| endif |
| |
| INTERNAL_RECOVERYIMAGE_ARGS := \ |
| $(addprefix --second ,$(INSTALLED_2NDBOOTLOADER_TARGET)) \ |
| --kernel $(recovery_kernel) \ |
| --ramdisk $(recovery_ramdisk) |
| |
| # Assumes this has already been stripped |
| ifdef BOARD_KERNEL_CMDLINE |
| INTERNAL_RECOVERYIMAGE_ARGS += --cmdline "$(BOARD_KERNEL_CMDLINE)" |
| endif |
| ifdef BOARD_KERNEL_BASE |
| INTERNAL_RECOVERYIMAGE_ARGS += --base $(BOARD_KERNEL_BASE) |
| endif |
| BOARD_KERNEL_PAGESIZE := $(strip $(BOARD_KERNEL_PAGESIZE)) |
| ifdef BOARD_KERNEL_PAGESIZE |
| INTERNAL_RECOVERYIMAGE_ARGS += --pagesize $(BOARD_KERNEL_PAGESIZE) |
| endif |
| |
| # Keys authorized to sign OTA packages this build will accept. The |
| # build always uses dev-keys for this; release packaging tools will |
| # substitute other keys for this one. |
| OTA_PUBLIC_KEYS := $(DEFAULT_SYSTEM_DEV_CERTIFICATE).x509.pem |
| |
| # Generate a file containing the keys that will be read by the |
| # recovery binary. |
| RECOVERY_INSTALL_OTA_KEYS := \ |
| $(call intermediates-dir-for,PACKAGING,ota_keys)/keys |
| DUMPKEY_JAR := $(HOST_OUT_JAVA_LIBRARIES)/dumpkey.jar |
| $(RECOVERY_INSTALL_OTA_KEYS): PRIVATE_OTA_PUBLIC_KEYS := $(OTA_PUBLIC_KEYS) |
| $(RECOVERY_INSTALL_OTA_KEYS): extra_keys := $(patsubst %,%.x509.pem,$(PRODUCT_EXTRA_RECOVERY_KEYS)) |
| $(RECOVERY_INSTALL_OTA_KEYS): $(OTA_PUBLIC_KEYS) $(DUMPKEY_JAR) $(extra_keys) |
| @echo "DumpPublicKey: $@ <= $(PRIVATE_OTA_PUBLIC_KEYS) $(extra_keys)" |
| @rm -rf $@ |
| @mkdir -p $(dir $@) |
| java -jar $(DUMPKEY_JAR) $(PRIVATE_OTA_PUBLIC_KEYS) $(extra_keys) > $@ |
| |
| $(INSTALLED_RECOVERYIMAGE_TARGET): $(MKBOOTFS) $(MKBOOTIMG) $(MINIGZIP) \ |
| $(INSTALLED_RAMDISK_TARGET) \ |
| $(INSTALLED_BOOTIMAGE_TARGET) \ |
| $(recovery_binary) \ |
| $(recovery_initrc) $(recovery_sepolicy) $(recovery_kernel) \ |
| $(INSTALLED_2NDBOOTLOADER_TARGET) \ |
| $(recovery_build_prop) $(recovery_resource_deps) \ |
| $(recovery_fstab) \ |
| $(RECOVERY_INSTALL_OTA_KEYS) |
| @echo ----- Making recovery image ------ |
| $(hide) rm -rf $(TARGET_RECOVERY_OUT) |
| $(hide) mkdir -p $(TARGET_RECOVERY_OUT) |
| $(hide) mkdir -p $(TARGET_RECOVERY_ROOT_OUT)/etc $(TARGET_RECOVERY_ROOT_OUT)/tmp |
| @echo Copying baseline ramdisk... |
| $(hide) cp -R $(TARGET_ROOT_OUT) $(TARGET_RECOVERY_OUT) |
| @echo Modifying ramdisk contents... |
| $(hide) rm -f $(TARGET_RECOVERY_ROOT_OUT)/init*.rc |
| $(hide) cp -f $(recovery_initrc) $(TARGET_RECOVERY_ROOT_OUT)/ |
| $(hide) rm -f $(TARGET_RECOVERY_ROOT_OUT)/sepolicy |
| $(hide) cp -f $(recovery_sepolicy) $(TARGET_RECOVERY_ROOT_OUT)/sepolicy |
| $(hide) -cp $(TARGET_ROOT_OUT)/init.recovery.*.rc $(TARGET_RECOVERY_ROOT_OUT)/ |
| $(hide) cp -f $(recovery_binary) $(TARGET_RECOVERY_ROOT_OUT)/sbin/ |
| $(hide) cp -rf $(recovery_resources_common) $(TARGET_RECOVERY_ROOT_OUT)/ |
| $(hide) cp -f $(recovery_font) $(TARGET_RECOVERY_ROOT_OUT)/res/images/font.png |
| $(hide) $(foreach item,$(recovery_resources_private), \ |
| cp -rf $(item) $(TARGET_RECOVERY_ROOT_OUT)/) |
| $(hide) $(foreach item,$(recovery_fstab), \ |
| cp -f $(item) $(TARGET_RECOVERY_ROOT_OUT)/etc/recovery.fstab) |
| $(hide) cp $(RECOVERY_INSTALL_OTA_KEYS) $(TARGET_RECOVERY_ROOT_OUT)/res/keys |
| $(hide) cat $(INSTALLED_DEFAULT_PROP_TARGET) $(recovery_build_prop) \ |
| > $(TARGET_RECOVERY_ROOT_OUT)/default.prop |
| $(hide) $(MKBOOTFS) $(TARGET_RECOVERY_ROOT_OUT) | $(MINIGZIP) > $(recovery_ramdisk) |
| $(hide) $(MKBOOTIMG) $(INTERNAL_RECOVERYIMAGE_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $@ |
| $(hide) $(call assert-max-image-size,$@,$(BOARD_RECOVERYIMAGE_PARTITION_SIZE),raw) |
| @echo ----- Made recovery image: $@ -------- |
| |
| $(RECOVERY_RESOURCE_ZIP): $(INSTALLED_RECOVERYIMAGE_TARGET) |
| $(hide) mkdir -p $(dir $@) |
| $(hide) find $(TARGET_RECOVERY_ROOT_OUT)/res -type f | sort | zip -0qrj $@ -@ |
| |
| else |
| INSTALLED_RECOVERYIMAGE_TARGET := |
| RECOVERY_RESOURCE_ZIP := |
| endif |
| |
| .PHONY: recoveryimage |
| recoveryimage: $(INSTALLED_RECOVERYIMAGE_TARGET) $(RECOVERY_RESOURCE_ZIP) |
| |
| ifneq ($(BOARD_NAND_PAGE_SIZE),) |
| mkyaffs2_extra_flags := -c $(BOARD_NAND_PAGE_SIZE) |
| else |
| mkyaffs2_extra_flags := |
| BOARD_NAND_PAGE_SIZE := 2048 |
| endif |
| |
| ifneq ($(BOARD_NAND_SPARE_SIZE),) |
| mkyaffs2_extra_flags += -s $(BOARD_NAND_SPARE_SIZE) |
| else |
| BOARD_NAND_SPARE_SIZE := 64 |
| endif |
| |
| # ----------------------------------------------------------------- |
| # system image |
| # |
| # Remove overridden packages from $(ALL_PDK_FUSION_FILES) |
| PDK_FUSION_SYSIMG_FILES := \ |
| $(filter-out $(foreach p,$(overridden_packages),$(p) %/$(p).apk), \ |
| $(ALL_PDK_FUSION_FILES)) |
| |
| INTERNAL_SYSTEMIMAGE_FILES := $(filter $(TARGET_OUT)/%, \ |
| $(ALL_PREBUILT) \ |
| $(ALL_COPIED_HEADERS) \ |
| $(ALL_GENERATED_SOURCES) \ |
| $(ALL_DEFAULT_INSTALLED_MODULES) \ |
| $(PDK_FUSION_SYSIMG_FILES) \ |
| $(RECOVERY_RESOURCE_ZIP)) |
| |
| FULL_SYSTEMIMAGE_DEPS := $(INTERNAL_SYSTEMIMAGE_FILES) $(INTERNAL_USERIMAGES_DEPS) |
| # ----------------------------------------------------------------- |
| # installed file list |
| # Depending on anything that $(BUILT_SYSTEMIMAGE) depends on. |
| # We put installed-files.txt ahead of image itself in the dependency graph |
| # so that we can get the size stat even if the build fails due to too large |
| # system image. |
| INSTALLED_FILES_FILE := $(PRODUCT_OUT)/installed-files.txt |
| $(INSTALLED_FILES_FILE): $(FULL_SYSTEMIMAGE_DEPS) |
| @echo Installed file list: $@ |
| @mkdir -p $(dir $@) |
| @rm -f $@ |
| $(hide) build/tools/fileslist.py $(TARGET_OUT) > $@ |
| |
| .PHONY: installed-file-list |
| installed-file-list: $(INSTALLED_FILES_FILE) |
| |
| $(call dist-for-goals, sdk win_sdk sdk_addon, $(INSTALLED_FILES_FILE)) |
| |
| systemimage_intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,systemimage) |
| BUILT_SYSTEMIMAGE := $(systemimage_intermediates)/system.img |
| |
| # $(1): output file |
| define build-systemimage-target |
| @echo "Target system fs image: $(1)" |
| @mkdir -p $(dir $(1)) $(systemimage_intermediates) && rm -rf $(systemimage_intermediates)/system_image_info.txt |
| $(call generate-userimage-prop-dictionary, $(systemimage_intermediates)/system_image_info.txt, skip_fsck=true) |
| $(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH \ |
| ./build/tools/releasetools/build_image.py \ |
| $(TARGET_OUT) $(systemimage_intermediates)/system_image_info.txt $(1) |
| endef |
| |
| $(BUILT_SYSTEMIMAGE): $(FULL_SYSTEMIMAGE_DEPS) $(INSTALLED_FILES_FILE) |
| $(call build-systemimage-target,$@) |
| |
| INSTALLED_SYSTEMIMAGE := $(PRODUCT_OUT)/system.img |
| SYSTEMIMAGE_SOURCE_DIR := $(TARGET_OUT) |
| |
| # The system partition needs room for the recovery image as well. We |
| # now store the recovery image as a binary patch using the boot image |
| # as the source (since they are very similar). Generate the patch so |
| # we can see how big it's going to be, and include that in the system |
| # image size check calculation. |
| ifneq ($(INSTALLED_RECOVERYIMAGE_TARGET),) |
| intermediates := $(call intermediates-dir-for,PACKAGING,recovery_patch) |
| RECOVERY_FROM_BOOT_PATCH := $(intermediates)/recovery_from_boot.p |
| $(RECOVERY_FROM_BOOT_PATCH): $(INSTALLED_RECOVERYIMAGE_TARGET) \ |
| $(INSTALLED_BOOTIMAGE_TARGET) \ |
| $(HOST_OUT_EXECUTABLES)/imgdiff \ |
| $(HOST_OUT_EXECUTABLES)/bsdiff |
| @echo "Construct recovery from boot" |
| mkdir -p $(dir $@) |
| PATH=$(HOST_OUT_EXECUTABLES):$$PATH $(HOST_OUT_EXECUTABLES)/imgdiff $(INSTALLED_BOOTIMAGE_TARGET) $(INSTALLED_RECOVERYIMAGE_TARGET) $@ |
| endif |
| |
| |
| $(INSTALLED_SYSTEMIMAGE): $(BUILT_SYSTEMIMAGE) $(RECOVERY_FROM_BOOT_PATCH) | $(ACP) |
| @echo "Install system fs image: $@" |
| $(copy-file-to-target) |
| $(hide) $(call assert-max-image-size,$@ $(RECOVERY_FROM_BOOT_PATCH),$(BOARD_SYSTEMIMAGE_PARTITION_SIZE),yaffs) |
| |
| systemimage: $(INSTALLED_SYSTEMIMAGE) |
| |
| .PHONY: systemimage-nodeps snod |
| systemimage-nodeps snod: $(filter-out systemimage-nodeps snod,$(MAKECMDGOALS)) \ |
| | $(INTERNAL_USERIMAGES_DEPS) |
| @echo "make $@: ignoring dependencies" |
| $(call build-systemimage-target,$(INSTALLED_SYSTEMIMAGE)) |
| $(hide) $(call assert-max-image-size,$(INSTALLED_SYSTEMIMAGE),$(BOARD_SYSTEMIMAGE_PARTITION_SIZE),yaffs) |
| |
| ifneq (,$(filter systemimage-nodeps snod, $(MAKECMDGOALS))) |
| ifeq (true,$(WITH_DEXPREOPT)) |
| $(warning Warning: with dexpreopt enabled, you may need a full rebuild.) |
| endif |
| endif |
| |
| ####### |
| ## system tarball |
| define build-systemtarball-target |
| $(call pretty,"Target system fs tarball: $(INSTALLED_SYSTEMTARBALL_TARGET)") |
| $(MKTARBALL) $(FS_GET_STATS) \ |
| $(PRODUCT_OUT) system $(PRIVATE_SYSTEM_TAR) \ |
| $(INSTALLED_SYSTEMTARBALL_TARGET) |
| endef |
| |
| ifndef SYSTEM_TARBALL_FORMAT |
| SYSTEM_TARBALL_FORMAT := bz2 |
| endif |
| |
| system_tar := $(PRODUCT_OUT)/system.tar |
| INSTALLED_SYSTEMTARBALL_TARGET := $(system_tar).$(SYSTEM_TARBALL_FORMAT) |
| $(INSTALLED_SYSTEMTARBALL_TARGET): PRIVATE_SYSTEM_TAR := $(system_tar) |
| $(INSTALLED_SYSTEMTARBALL_TARGET): $(FS_GET_STATS) $(INTERNAL_SYSTEMIMAGE_FILES) |
| $(build-systemtarball-target) |
| |
| .PHONY: systemtarball-nodeps |
| systemtarball-nodeps: $(FS_GET_STATS) \ |
| $(filter-out systemtarball-nodeps stnod,$(MAKECMDGOALS)) |
| $(build-systemtarball-target) |
| |
| .PHONY: stnod |
| stnod: systemtarball-nodeps |
| |
| # For platform-java goal, add platform as well |
| ifneq (,$(filter platform-java, $(MAKECMDGOALS))) |
| PLATFORM_ZIP_ADD_JAVA := true |
| endif |
| |
| ####### |
| ## platform.zip: system, plus other files to be used in PDK fusion build, |
| ## in a zip file |
| ## |
| ## PDK_PLATFORM_ZIP_PRODUCT_BINARIES is used to store specified files to platform.zip. |
| ## The variable will be typically set from BoardConfig.mk. |
| ## Files under out dir will be rejected to prevent possible conflicts with other rules. |
| PDK_PLATFORM_ZIP_PRODUCT_BINARIES := $(filter-out $(OUT_DIR)/%,$(PDK_PLATFORM_ZIP_PRODUCT_BINARIES)) |
| INSTALLED_PLATFORM_ZIP := $(PRODUCT_OUT)/platform.zip |
| $(INSTALLED_PLATFORM_ZIP) : $(INTERNAL_SYSTEMIMAGE_FILES) |
| $(call pretty,"Platform zip package: $(INSTALLED_PLATFORM_ZIP)") |
| $(hide) rm -f $@ |
| $(hide) cd $(dir $@) && zip -qry $(notdir $@) \ |
| $(TARGET_COPY_OUT_SYSTEM) \ |
| $(patsubst $(PRODUCT_OUT)/%, %, $(TARGET_OUT_NOTICE_FILES)) \ |
| $(addprefix symbols/,$(PDK_SYMBOL_FILES_LIST)) |
| ifeq (true,$(PLATFORM_ZIP_ADD_JAVA)) |
| $(hide) cd $(OUT_DIR) && zip -qry $(patsubst $(OUT_DIR)/%,%,$@) $(PDK_PLATFORM_JAVA_ZIP_CONTENTS) |
| endif |
| ifneq ($(PDK_PLATFORM_ZIP_PRODUCT_BINARIES),) |
| $(hide) zip -qry $@ $(PDK_PLATFORM_ZIP_PRODUCT_BINARIES) |
| endif |
| |
| .PHONY: platform |
| platform: $(INSTALLED_PLATFORM_ZIP) |
| |
| .PHONY: platform-java |
| platform-java: platform |
| |
| # Dist the platform.zip |
| ifneq (,$(filter platform platform-java, $(MAKECMDGOALS))) |
| $(call dist-for-goals, platform platform-java, $(INSTALLED_PLATFORM_ZIP)) |
| endif |
| |
| ####### |
| ## boot tarball |
| define build-boottarball-target |
| $(hide) echo "Target boot fs tarball: $(INSTALLED_BOOTTARBALL_TARGET)" |
| $(hide) mkdir -p $(PRODUCT_OUT)/boot |
| $(hide) cp -f $(INTERNAL_BOOTIMAGE_FILES) $(PRODUCT_OUT)/boot/. |
| $(hide) echo $(BOARD_KERNEL_CMDLINE) > $(PRODUCT_OUT)/boot/cmdline |
| $(hide) $(MKTARBALL) $(FS_GET_STATS) \ |
| $(PRODUCT_OUT) boot $(PRIVATE_BOOT_TAR) \ |
| $(INSTALLED_BOOTTARBALL_TARGET) |
| endef |
| |
| ifndef BOOT_TARBALL_FORMAT |
| BOOT_TARBALL_FORMAT := bz2 |
| endif |
| |
| boot_tar := $(PRODUCT_OUT)/boot.tar |
| INSTALLED_BOOTTARBALL_TARGET := $(boot_tar).$(BOOT_TARBALL_FORMAT) |
| $(INSTALLED_BOOTTARBALL_TARGET): PRIVATE_BOOT_TAR := $(boot_tar) |
| $(INSTALLED_BOOTTARBALL_TARGET): $(FS_GET_STATS) $(INTERNAL_BOOTIMAGE_FILES) |
| $(build-boottarball-target) |
| |
| .PHONY: boottarball-nodeps btnod |
| boottarball-nodeps btnod: $(FS_GET_STATS) \ |
| $(filter-out boottarball-nodeps btnod,$(MAKECMDGOALS)) |
| $(build-boottarball-target) |
| |
| |
| # ----------------------------------------------------------------- |
| # data partition image |
| INTERNAL_USERDATAIMAGE_FILES := \ |
| $(filter $(TARGET_OUT_DATA)/%,$(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| # Don't build userdata.img if it's extfs but no partition size |
| skip_userdata.img := |
| ifdef INTERNAL_USERIMAGES_EXT_VARIANT |
| ifndef BOARD_USERDATAIMAGE_PARTITION_SIZE |
| skip_userdata.img := true |
| endif |
| endif |
| |
| ifneq ($(skip_userdata.img),true) |
| userdataimage_intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,userdata) |
| BUILT_USERDATAIMAGE_TARGET := $(PRODUCT_OUT)/userdata.img |
| |
| define build-userdataimage-target |
| $(call pretty,"Target userdata fs image: $(INSTALLED_USERDATAIMAGE_TARGET)") |
| @mkdir -p $(TARGET_OUT_DATA) |
| @mkdir -p $(userdataimage_intermediates) && rm -rf $(userdataimage_intermediates)/userdata_image_info.txt |
| $(call generate-userimage-prop-dictionary, $(userdataimage_intermediates)/userdata_image_info.txt, skip_fsck=true) |
| $(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH \ |
| ./build/tools/releasetools/build_image.py \ |
| $(TARGET_OUT_DATA) $(userdataimage_intermediates)/userdata_image_info.txt $(INSTALLED_USERDATAIMAGE_TARGET) |
| $(hide) $(call assert-max-image-size,$(INSTALLED_USERDATAIMAGE_TARGET),$(BOARD_USERDATAIMAGE_PARTITION_SIZE),yaffs) |
| endef |
| |
| # We just build this directly to the install location. |
| INSTALLED_USERDATAIMAGE_TARGET := $(BUILT_USERDATAIMAGE_TARGET) |
| $(INSTALLED_USERDATAIMAGE_TARGET): $(INTERNAL_USERIMAGES_DEPS) \ |
| $(INTERNAL_USERDATAIMAGE_FILES) |
| $(build-userdataimage-target) |
| |
| .PHONY: userdataimage-nodeps |
| userdataimage-nodeps: | $(INTERNAL_USERIMAGES_DEPS) |
| $(build-userdataimage-target) |
| |
| endif # not skip_userdata.img |
| skip_userdata.img := |
| |
| ####### |
| ## data partition tarball |
| define build-userdatatarball-target |
| $(call pretty,"Target userdata fs tarball: " \ |
| "$(INSTALLED_USERDATATARBALL_TARGET)") |
| $(MKTARBALL) $(FS_GET_STATS) \ |
| $(PRODUCT_OUT) data $(PRIVATE_USERDATA_TAR) \ |
| $(INSTALLED_USERDATATARBALL_TARGET) |
| endef |
| |
| userdata_tar := $(PRODUCT_OUT)/userdata.tar |
| INSTALLED_USERDATATARBALL_TARGET := $(userdata_tar).bz2 |
| $(INSTALLED_USERDATATARBALL_TARGET): PRIVATE_USERDATA_TAR := $(userdata_tar) |
| $(INSTALLED_USERDATATARBALL_TARGET): $(FS_GET_STATS) $(INTERNAL_USERDATAIMAGE_FILES) |
| $(build-userdatatarball-target) |
| |
| .PHONY: userdatatarball-nodeps |
| userdatatarball-nodeps: $(FS_GET_STATS) |
| $(build-userdatatarball-target) |
| |
| |
| # ----------------------------------------------------------------- |
| # cache partition image |
| ifdef BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE |
| INTERNAL_CACHEIMAGE_FILES := \ |
| $(filter $(TARGET_OUT_CACHE)/%,$(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| cacheimage_intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,cache) |
| BUILT_CACHEIMAGE_TARGET := $(PRODUCT_OUT)/cache.img |
| |
| define build-cacheimage-target |
| $(call pretty,"Target cache fs image: $(INSTALLED_CACHEIMAGE_TARGET)") |
| @mkdir -p $(TARGET_OUT_CACHE) |
| @mkdir -p $(cacheimage_intermediates) && rm -rf $(cacheimage_intermediates)/cache_image_info.txt |
| $(call generate-userimage-prop-dictionary, $(cacheimage_intermediates)/cache_image_info.txt, skip_fsck=true) |
| $(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH \ |
| ./build/tools/releasetools/build_image.py \ |
| $(TARGET_OUT_CACHE) $(cacheimage_intermediates)/cache_image_info.txt $(INSTALLED_CACHEIMAGE_TARGET) |
| $(hide) $(call assert-max-image-size,$(INSTALLED_CACHEIMAGE_TARGET),$(BOARD_CACHEIMAGE_PARTITION_SIZE),yaffs) |
| endef |
| |
| # We just build this directly to the install location. |
| INSTALLED_CACHEIMAGE_TARGET := $(BUILT_CACHEIMAGE_TARGET) |
| $(INSTALLED_CACHEIMAGE_TARGET): $(INTERNAL_USERIMAGES_DEPS) $(INTERNAL_CACHEIMAGE_FILES) |
| $(build-cacheimage-target) |
| |
| .PHONY: cacheimage-nodeps |
| cacheimage-nodeps: | $(INTERNAL_USERIMAGES_DEPS) |
| $(build-cacheimage-target) |
| |
| endif # BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE |
| |
| |
| # ----------------------------------------------------------------- |
| # vendor partition image |
| ifdef BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE |
| INTERNAL_VENDORIMAGE_FILES := \ |
| $(filter $(TARGET_OUT_VENDOR)/%,$(ALL_DEFAULT_INSTALLED_MODULES)) |
| |
| vendorimage_intermediates := \ |
| $(call intermediates-dir-for,PACKAGING,vendor) |
| BUILT_VENDORIMAGE_TARGET := $(PRODUCT_OUT)/vendor.img |
| |
| define build-vendorimage-target |
| $(call pretty,"Target vendor fs image: $(INSTALLED_VENDORIMAGE_TARGET)") |
| @mkdir -p $(TARGET_OUT_VENDOR) |
| @mkdir -p $(vendorimage_intermediates) && rm -rf $(vendorimage_intermediates)/vendor_image_info.txt |
| $(call generate-userimage-prop-dictionary, $(vendorimage_intermediates)/vendor_image_info.txt, skip_fsck=true) |
| $(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH \ |
| ./build/tools/releasetools/build_image.py \ |
| $(TARGET_OUT_VENDOR) $(vendorimage_intermediates)/vendor_image_info.txt $(INSTALLED_VENDORIMAGE_TARGET) |
| $(hide) $(call assert-max-image-size,$(INSTALLED_VENDORIMAGE_TARGET),$(BOARD_VENDORIMAGE_PARTITION_SIZE),yaffs) |
| endef |
| |
| # We just build this directly to the install location. |
| INSTALLED_VENDORIMAGE_TARGET := $(BUILT_VENDORIMAGE_TARGET) |
| $(INSTALLED_VENDORIMAGE_TARGET): $(INTERNAL_USERIMAGES_DEPS) $(INTERNAL_VENDORIMAGE_FILES) |
| $(build-vendorimage-target) |
| |
| .PHONY: vendorimage-nodeps |
| vendorimage-nodeps: | $(INTERNAL_USERIMAGES_DEPS) |
| $(build-vendorimage-target) |
| |
| endif # BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE |
| |
| # ----------------------------------------------------------------- |
| # bring in the installer image generation defines if necessary |
| ifeq ($(TARGET_USE_DISKINSTALLER),true) |
| include bootable/diskinstaller/config.mk |
| endif |
| |
| # ----------------------------------------------------------------- |
| # host tools needed to build dist and OTA packages |
| |
| DISTTOOLS := $(HOST_OUT_EXECUTABLES)/minigzip \ |
| $(HOST_OUT_EXECUTABLES)/mkbootfs \ |
| $(HOST_OUT_EXECUTABLES)/mkbootimg \ |
| $(HOST_OUT_EXECUTABLES)/fs_config \ |
| $(HOST_OUT_EXECUTABLES)/mkyaffs2image \ |
| $(HOST_OUT_EXECUTABLES)/zipalign \ |
| $(HOST_OUT_EXECUTABLES)/bsdiff \ |
| $(HOST_OUT_EXECUTABLES)/imgdiff \ |
| $(HOST_OUT_JAVA_LIBRARIES)/dumpkey.jar \ |
| $(HOST_OUT_JAVA_LIBRARIES)/signapk.jar \ |
| $(HOST_OUT_EXECUTABLES)/mkuserimg.sh \ |
| $(HOST_OUT_EXECUTABLES)/make_ext4fs \ |
| $(HOST_OUT_EXECUTABLES)/simg2img \ |
| $(HOST_OUT_EXECUTABLES)/e2fsck |
| |
| OTATOOLS := $(DISTTOOLS) \ |
| $(HOST_OUT_EXECUTABLES)/aapt |
| |
| .PHONY: otatools |
| otatools: $(OTATOOLS) |
| |
| # ----------------------------------------------------------------- |
| # A zip of the directories that map to the target filesystem. |
| # This zip can be used to create an OTA package or filesystem image |
| # as a post-build step. |
| # |
| name := $(TARGET_PRODUCT) |
| ifeq ($(TARGET_BUILD_TYPE),debug) |
| name := $(name)_debug |
| endif |
| name := $(name)-target_files-$(FILE_NAME_TAG) |
| |
| intermediates := $(call intermediates-dir-for,PACKAGING,target_files) |
| BUILT_TARGET_FILES_PACKAGE := $(intermediates)/$(name).zip |
| $(BUILT_TARGET_FILES_PACKAGE): intermediates := $(intermediates) |
| $(BUILT_TARGET_FILES_PACKAGE): \ |
| zip_root := $(intermediates)/$(name) |
| |
| # $(1): Directory to copy |
| # $(2): Location to copy it to |
| # The "ls -A" is to prevent "acp s/* d" from failing if s is empty. |
| define package_files-copy-root |
| if [ -d "$(strip $(1))" -a "$$(ls -A $(1))" ]; then \ |
| mkdir -p $(2) && \ |
| $(ACP) -rd $(strip $(1))/* $(2); \ |
| fi |
| endef |
| |
| built_ota_tools := \ |
| $(call intermediates-dir-for,EXECUTABLES,applypatch)/applypatch \ |
| $(call intermediates-dir-for,EXECUTABLES,applypatch_static)/applypatch_static \ |
| $(call intermediates-dir-for,EXECUTABLES,check_prereq)/check_prereq \ |
| $(call intermediates-dir-for,EXECUTABLES,sqlite3)/sqlite3 \ |
| $(call intermediates-dir-for,EXECUTABLES,updater)/updater |
| $(BUILT_TARGET_FILES_PACKAGE): PRIVATE_OTA_TOOLS := $(built_ota_tools) |
| |
| $(BUILT_TARGET_FILES_PACKAGE): PRIVATE_RECOVERY_API_VERSION := $(RECOVERY_API_VERSION) |
| $(BUILT_TARGET_FILES_PACKAGE): PRIVATE_RECOVERY_FSTAB_VERSION := $(RECOVERY_FSTAB_VERSION) |
| |
| ifeq ($(TARGET_RELEASETOOLS_EXTENSIONS),) |
| # default to common dir for device vendor |
| $(BUILT_TARGET_FILES_PACKAGE): tool_extensions := $(TARGET_DEVICE_DIR)/../common |
| else |
| $(BUILT_TARGET_FILES_PACKAGE): tool_extensions := $(TARGET_RELEASETOOLS_EXTENSIONS) |
| endif |
| |
| # Depending on the various images guarantees that the underlying |
| # directories are up-to-date. |
| $(BUILT_TARGET_FILES_PACKAGE): \ |
| $(INSTALLED_BOOTIMAGE_TARGET) \ |
| $(INSTALLED_RADIOIMAGE_TARGET) \ |
| $(INSTALLED_RECOVERYIMAGE_TARGET) \ |
| $(INSTALLED_SYSTEMIMAGE) \ |
| $(INSTALLED_USERDATAIMAGE_TARGET) \ |
| $(INSTALLED_CACHEIMAGE_TARGET) \ |
| $(INSTALLED_VENDORIMAGE_TARGET) \ |
| $(INSTALLED_ANDROID_INFO_TXT_TARGET) \ |
| $(SELINUX_FC) \ |
| $(built_ota_tools) \ |
| $(APKCERTS_FILE) \ |
| $(HOST_OUT_EXECUTABLES)/fs_config \ |
| | $(ACP) |
| @echo "Package target files: $@" |
| $(hide) rm -rf $@ $(zip_root) |
| $(hide) mkdir -p $(dir $@) $(zip_root) |
| @# Components of the recovery image |
| $(hide) mkdir -p $(zip_root)/RECOVERY |
| $(hide) $(call package_files-copy-root, \ |
| $(TARGET_RECOVERY_ROOT_OUT),$(zip_root)/RECOVERY/RAMDISK) |
| ifdef INSTALLED_KERNEL_TARGET |
| $(hide) $(ACP) $(INSTALLED_KERNEL_TARGET) $(zip_root)/RECOVERY/kernel |
| endif |
| ifdef INSTALLED_2NDBOOTLOADER_TARGET |
| $(hide) $(ACP) \ |
| $(INSTALLED_2NDBOOTLOADER_TARGET) $(zip_root)/RECOVERY/second |
| endif |
| ifdef BOARD_KERNEL_CMDLINE |
| $(hide) echo "$(BOARD_KERNEL_CMDLINE)" > $(zip_root)/RECOVERY/cmdline |
| endif |
| ifdef BOARD_KERNEL_BASE |
| $(hide) echo "$(BOARD_KERNEL_BASE)" > $(zip_root)/RECOVERY/base |
| endif |
| ifdef BOARD_KERNEL_PAGESIZE |
| $(hide) echo "$(BOARD_KERNEL_PAGESIZE)" > $(zip_root)/RECOVERY/pagesize |
| endif |
| @# Components of the boot image |
| $(hide) mkdir -p $(zip_root)/BOOT |
| $(hide) $(call package_files-copy-root, \ |
| $(TARGET_ROOT_OUT),$(zip_root)/BOOT/RAMDISK) |
| ifdef INSTALLED_KERNEL_TARGET |
| $(hide) $(ACP) $(INSTALLED_KERNEL_TARGET) $(zip_root)/BOOT/kernel |
| endif |
| ifdef INSTALLED_2NDBOOTLOADER_TARGET |
| $(hide) $(ACP) \ |
| $(INSTALLED_2NDBOOTLOADER_TARGET) $(zip_root)/BOOT/second |
| endif |
| ifdef BOARD_KERNEL_CMDLINE |
| $(hide) echo "$(BOARD_KERNEL_CMDLINE)" > $(zip_root)/BOOT/cmdline |
| endif |
| ifdef BOARD_KERNEL_BASE |
| $(hide) echo "$(BOARD_KERNEL_BASE)" > $(zip_root)/BOOT/base |
| endif |
| ifdef BOARD_KERNEL_PAGESIZE |
| $(hide) echo "$(BOARD_KERNEL_PAGESIZE)" > $(zip_root)/BOOT/pagesize |
| endif |
| $(hide) $(foreach t,$(INSTALLED_RADIOIMAGE_TARGET),\ |
| mkdir -p $(zip_root)/RADIO; \ |
| $(ACP) $(t) $(zip_root)/RADIO/$(notdir $(t));) |
| @# Contents of the system image |
| $(hide) $(call package_files-copy-root, \ |
| $(SYSTEMIMAGE_SOURCE_DIR),$(zip_root)/SYSTEM) |
| @# Contents of the data image |
| $(hide) $(call package_files-copy-root, \ |
| $(TARGET_OUT_DATA),$(zip_root)/DATA) |
| ifdef BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE |
| @# Contents of the vendor image |
| $(hide) $(call package_files-copy-root, \ |
| $(TARGET_OUT_VENDOR),$(zip_root)/VENDOR) |
| endif |
| @# Extra contents of the OTA package |
| $(hide) mkdir -p $(zip_root)/OTA/bin |
| $(hide) $(ACP) $(INSTALLED_ANDROID_INFO_TXT_TARGET) $(zip_root)/OTA/ |
| $(hide) $(ACP) $(PRIVATE_OTA_TOOLS) $(zip_root)/OTA/bin/ |
| @# Files that do not end up in any images, but are necessary to |
| @# build them. |
| $(hide) mkdir -p $(zip_root)/META |
| $(hide) $(ACP) $(APKCERTS_FILE) $(zip_root)/META/apkcerts.txt |
| $(hide) if test -e $(tool_extensions)/releasetools.py; then $(ACP) $(tool_extensions)/releasetools.py $(zip_root)/META/; fi |
| $(hide) echo "$(PRODUCT_OTA_PUBLIC_KEYS)" > $(zip_root)/META/otakeys.txt |
| $(hide) echo "recovery_api_version=$(PRIVATE_RECOVERY_API_VERSION)" > $(zip_root)/META/misc_info.txt |
| $(hide) echo "fstab_version=$(PRIVATE_RECOVERY_FSTAB_VERSION)" >> $(zip_root)/META/misc_info.txt |
| ifdef BOARD_FLASH_BLOCK_SIZE |
| $(hide) echo "blocksize=$(BOARD_FLASH_BLOCK_SIZE)" >> $(zip_root)/META/misc_info.txt |
| endif |
| ifdef BOARD_BOOTIMAGE_PARTITION_SIZE |
| $(hide) echo "boot_size=$(BOARD_BOOTIMAGE_PARTITION_SIZE)" >> $(zip_root)/META/misc_info.txt |
| endif |
| ifdef BOARD_RECOVERYIMAGE_PARTITION_SIZE |
| $(hide) echo "recovery_size=$(BOARD_RECOVERYIMAGE_PARTITION_SIZE)" >> $(zip_root)/META/misc_info.txt |
| endif |
| $(hide) echo "tool_extensions=$(tool_extensions)" >> $(zip_root)/META/misc_info.txt |
| $(hide) echo "default_system_dev_certificate=$(DEFAULT_SYSTEM_DEV_CERTIFICATE)" >> $(zip_root)/META/misc_info.txt |
| ifdef PRODUCT_EXTRA_RECOVERY_KEYS |
| $(hide) echo "extra_recovery_keys=$(PRODUCT_EXTRA_RECOVERY_KEYS)" >> $(zip_root)/META/misc_info.txt |
| endif |
| $(hide) echo 'mkbootimg_args=$(BOARD_MKBOOTIMG_ARGS)' >> $(zip_root)/META/misc_info.txt |
| $(hide) echo "use_set_metadata=1" >> $(zip_root)/META/misc_info.txt |
| $(hide) echo "multistage_support=1" >> $(zip_root)/META/misc_info.txt |
| $(hide) echo "update_rename_support=1" >> $(zip_root)/META/misc_info.txt |
| $(call generate-userimage-prop-dictionary, $(zip_root)/META/misc_info.txt) |
| @# Zip everything up, preserving symlinks |
| $(hide) (cd $(zip_root) && zip -qry ../$(notdir $@) .) |
| @# Run fs_config on all the system, boot ramdisk, and recovery ramdisk files in the zip, and save the output |
| $(hide) zipinfo -1 $@ | awk 'BEGIN { FS="SYSTEM/" } /^SYSTEM\// {print "system/" $$2}' | $(HOST_OUT_EXECUTABLES)/fs_config -C -S $(SELINUX_FC) > $(zip_root)/META/filesystem_config.txt |
| $(hide) zipinfo -1 $@ | awk 'BEGIN { FS="BOOT/RAMDISK/" } /^BOOT\/RAMDISK\// {print $$2}' | $(HOST_OUT_EXECUTABLES)/fs_config -C -S $(SELINUX_FC) > $(zip_root)/META/boot_filesystem_config.txt |
| $(hide) zipinfo -1 $@ | awk 'BEGIN { FS="RECOVERY/RAMDISK/" } /^RECOVERY\/RAMDISK\// {print $$2}' | $(HOST_OUT_EXECUTABLES)/fs_config -C -S $(SELINUX_FC) > $(zip_root)/META/recovery_filesystem_config.txt |
| $(hide) (cd $(zip_root) && zip -q ../$(notdir $@) META/*filesystem_config.txt) |
| |
| .PHONY: target-files-package |
| target-files-package: $(BUILT_TARGET_FILES_PACKAGE) |
| |
| |
| ifneq ($(TARGET_PRODUCT),sdk) |
| ifeq ($(filter generic%,$(TARGET_DEVICE)),) |
| ifneq ($(TARGET_NO_KERNEL),true) |
| ifneq ($(recovery_fstab),) |
| |
| # ----------------------------------------------------------------- |
| # OTA update package |
| |
| name := $(TARGET_PRODUCT) |
| ifeq ($(TARGET_BUILD_TYPE),debug) |
| name := $(name)_debug |
| endif |
| name := $(name)-ota-$(FILE_NAME_TAG) |
| |
| INTERNAL_OTA_PACKAGE_TARGET := $(PRODUCT_OUT)/$(name).zip |
| |
| $(INTERNAL_OTA_PACKAGE_TARGET): KEY_CERT_PAIR := $(DEFAULT_KEY_CERT_PAIR) |
| |
| $(INTERNAL_OTA_PACKAGE_TARGET): $(BUILT_TARGET_FILES_PACKAGE) $(DISTTOOLS) |
| @echo "Package OTA: $@" |
| $(hide) MKBOOTIMG=$(BOARD_CUSTOM_MKBOOTIMG) \ |
| ./build/tools/releasetools/ota_from_target_files -v \ |
| -p $(HOST_OUT) \ |
| -k $(KEY_CERT_PAIR) \ |
| $(BUILT_TARGET_FILES_PACKAGE) $@ |
| |
| .PHONY: otapackage |
| otapackage: $(INTERNAL_OTA_PACKAGE_TARGET) |
| |
| # ----------------------------------------------------------------- |
| # The update package |
| |
| name := $(TARGET_PRODUCT) |
| ifeq ($(TARGET_BUILD_TYPE),debug) |
| name := $(name)_debug |
| endif |
| name := $(name)-img-$(FILE_NAME_TAG) |
| |
| INTERNAL_UPDATE_PACKAGE_TARGET := $(PRODUCT_OUT)/$(name).zip |
| |
| ifeq ($(TARGET_RELEASETOOLS_EXTENSIONS),) |
| # default to common dir for device vendor |
| $(INTERNAL_UPDATE_PACKAGE_TARGET): extensions := $(TARGET_DEVICE_DIR)/../common |
| else |
| $(INTERNAL_UPDATE_PACKAGE_TARGET): extensions := $(TARGET_RELEASETOOLS_EXTENSIONS) |
| endif |
| |
| $(INTERNAL_UPDATE_PACKAGE_TARGET): $(BUILT_TARGET_FILES_PACKAGE) $(DISTTOOLS) |
| @echo "Package: $@" |
| $(hide) MKBOOTIMG=$(BOARD_CUSTOM_MKBOOTIMG) \ |
| ./build/tools/releasetools/img_from_target_files -v \ |
| -s $(extensions) \ |
| -p $(HOST_OUT) \ |
| $(BUILT_TARGET_FILES_PACKAGE) $@ |
| |
| .PHONY: updatepackage |
| updatepackage: $(INTERNAL_UPDATE_PACKAGE_TARGET) |
| |
| endif # recovery_fstab is defined |
| endif # TARGET_NO_KERNEL != true |
| endif # TARGET_DEVICE != generic* |
| endif # TARGET_PRODUCT != sdk |
| |
| # ----------------------------------------------------------------- |
| # A zip of the symbols directory. Keep the full paths to make it |
| # more obvious where these files came from. |
| # |
| name := $(TARGET_PRODUCT) |
| ifeq ($(TARGET_BUILD_TYPE),debug) |
| name := $(name)_debug |
| endif |
| name := $(name)-symbols-$(FILE_NAME_TAG) |
| |
| SYMBOLS_ZIP := $(PRODUCT_OUT)/$(name).zip |
| $(SYMBOLS_ZIP): $(INSTALLED_SYSTEMIMAGE) $(INSTALLED_BOOTIMAGE_TARGET) |
| @echo "Package symbols: $@" |
| $(hide) rm -rf $@ |
| $(hide) mkdir -p $(dir $@) |
| $(hide) zip -qr $@ $(TARGET_OUT_UNSTRIPPED) |
| |
| # ----------------------------------------------------------------- |
| # A zip of the Android Apps. Not keeping full path so that we don't |
| # include product names when distributing |
| # |
| name := $(TARGET_PRODUCT) |
| ifeq ($(TARGET_BUILD_TYPE),debug) |
| name := $(name)_debug |
| endif |
| name := $(name)-apps-$(FILE_NAME_TAG) |
| |
| APPS_ZIP := $(PRODUCT_OUT)/$(name).zip |
| $(APPS_ZIP): $(INSTALLED_SYSTEMIMAGE) |
| @echo "Package apps: $@" |
| $(hide) rm -rf $@ |
| $(hide) mkdir -p $(dir $@) |
| $(hide) zip -qj $@ $(TARGET_OUT_APPS)/* $(TARGET_OUT_APPS_PRIVILEGED)/* |
| |
| |
| #------------------------------------------------------------------ |
| # A zip of emma code coverage meta files. Generated for fully emma |
| # instrumented build. |
| # |
| ifeq (true,$(EMMA_INSTRUMENT)) |
| EMMA_META_ZIP := $(PRODUCT_OUT)/emma_meta.zip |
| # the dependency will be set up later in build/core/main.mk. |
| $(EMMA_META_ZIP) : |
| @echo "Collecting Emma coverage meta files." |
| $(hide) find $(TARGET_COMMON_OUT_ROOT) -name "coverage.em" | \ |
| zip -@ -q $@ |
| |
| endif # EMMA_INSTRUMENT=true |
| |
| #------------------------------------------------------------------ |
| # A zip of Proguard obfuscation dictionary files. |
| # Only for apps_only build. |
| # |
| ifdef TARGET_BUILD_APPS |
| PROGUARD_DICT_ZIP := $(PRODUCT_OUT)/$(TARGET_PRODUCT)-proguard-dict-$(FILE_NAME_TAG).zip |
| # the dependency will be set up later in build/core/main.mk. |
| $(PROGUARD_DICT_ZIP) : |
| @echo "Packaging Proguard obfuscation dictionary files." |
| $(hide) dict_files=`find $(TARGET_OUT_COMMON_INTERMEDIATES)/APPS -name proguard_dictionary`; \ |
| if [ -n "$$dict_files" ]; then \ |
| zip -q $@ $$dict_files; \ |
| else \ |
| touch $(dir $@)/dummy; \ |
| (cd $(dir $@) && zip -q $(notdir $@) dummy); \ |
| zip -qd $@ dummy; \ |
| rm $(dir $@)/dummy; \ |
| fi |
| |
| endif # TARGET_BUILD_APPS |
| |
| # ----------------------------------------------------------------- |
| # dalvik something |
| .PHONY: dalvikfiles |
| dalvikfiles: $(INTERNAL_DALVIK_MODULES) |
| |
| # ----------------------------------------------------------------- |
| # The emulator package |
| ifeq ($(BUILD_EMULATOR),true) |
| INTERNAL_EMULATOR_PACKAGE_FILES += \ |
| $(HOST_OUT_EXECUTABLES)/emulator$(HOST_EXECUTABLE_SUFFIX) \ |
| prebuilts/qemu-kernel/$(TARGET_ARCH)/kernel-qemu \ |
| $(INSTALLED_RAMDISK_TARGET) \ |
| $(INSTALLED_SYSTEMIMAGE) \ |
| $(INSTALLED_USERDATAIMAGE_TARGET) |
| |
| name := $(TARGET_PRODUCT)-emulator-$(FILE_NAME_TAG) |
| |
| INTERNAL_EMULATOR_PACKAGE_TARGET := $(PRODUCT_OUT)/$(name).zip |
| |
| $(INTERNAL_EMULATOR_PACKAGE_TARGET): $(INTERNAL_EMULATOR_PACKAGE_FILES) |
| @echo "Package: $@" |
| $(hide) zip -qj $@ $(INTERNAL_EMULATOR_PACKAGE_FILES) |
| |
| endif |
| # ----------------------------------------------------------------- |
| # Old PDK stuffs, retired |
| # The pdk package (Platform Development Kit) |
| |
| #ifneq (,$(filter pdk,$(MAKECMDGOALS))) |
| # include development/pdk/Pdk.mk |
| #endif |
| |
| |
| # ----------------------------------------------------------------- |
| # The SDK |
| |
| # The SDK includes host-specific components, so it belongs under HOST_OUT. |
| sdk_dir := $(HOST_OUT)/sdk/$(TARGET_PRODUCT) |
| |
| # Build a name that looks like: |
| # |
| # linux-x86 --> android-sdk_12345_linux-x86 |
| # darwin-x86 --> android-sdk_12345_mac-x86 |
| # windows-x86 --> android-sdk_12345_windows |
| # |
| sdk_name := android-sdk_$(FILE_NAME_TAG) |
| ifeq ($(HOST_OS),darwin) |
| INTERNAL_SDK_HOST_OS_NAME := mac |
| else |
| INTERNAL_SDK_HOST_OS_NAME := $(HOST_OS) |
| endif |
| ifneq ($(HOST_OS),windows) |
| INTERNAL_SDK_HOST_OS_NAME := $(INTERNAL_SDK_HOST_OS_NAME)-$(SDK_HOST_ARCH) |
| endif |
| sdk_name := $(sdk_name)_$(INTERNAL_SDK_HOST_OS_NAME) |
| |
| sdk_dep_file := $(sdk_dir)/sdk_deps.mk |
| |
| ATREE_FILES := |
| -include $(sdk_dep_file) |
| |
| # if we don't have a real list, then use "everything" |
| ifeq ($(strip $(ATREE_FILES)),) |
| ATREE_FILES := \ |
| $(ALL_PREBUILT) \ |
| $(ALL_COPIED_HEADERS) \ |
| $(ALL_GENERATED_SOURCES) \ |
| $(ALL_DEFAULT_INSTALLED_MODULES) \ |
| $(INSTALLED_RAMDISK_TARGET) \ |
| $(ALL_DOCS) \ |
| $(ALL_SDK_FILES) |
| endif |
| |
| atree_dir := development/build |
| |
| |
| sdk_atree_files := \ |
| $(atree_dir)/sdk.exclude.atree \ |
| $(atree_dir)/sdk.atree \ |
| $(atree_dir)/sdk-$(HOST_OS)-$(SDK_HOST_ARCH).atree |
| |
| # development/build/sdk-android-<abi>.atree is used to differentiate |
| # between architecture models (e.g. ARMv5TE versus ARMv7) when copying |
| # files like the kernel image. We use TARGET_CPU_ABI because we don't |
| # have a better way to distinguish between CPU models. |
| ifneq (,$(strip $(wildcard $(atree_dir)/sdk-android-$(TARGET_CPU_ABI).atree))) |
| sdk_atree_files += $(atree_dir)/sdk-android-$(TARGET_CPU_ABI).atree |
| endif |
| |
| deps := \ |
| $(target_notice_file_txt) \ |
| $(tools_notice_file_txt) \ |
| $(OUT_DOCS)/offline-sdk-timestamp \ |
| $(SYMBOLS_ZIP) \ |
| $(INSTALLED_SYSTEMIMAGE) \ |
| $(INSTALLED_USERDATAIMAGE_TARGET) \ |
| $(INSTALLED_RAMDISK_TARGET) \ |
| $(INSTALLED_SDK_BUILD_PROP_TARGET) \ |
| $(INSTALLED_BUILD_PROP_TARGET) \ |
| $(ATREE_FILES) \ |
| $(atree_dir)/sdk.atree \ |
| $(HOST_OUT_EXECUTABLES)/atree \ |
| $(HOST_OUT_EXECUTABLES)/line_endings |
| |
| INTERNAL_SDK_TARGET := $(sdk_dir)/$(sdk_name).zip |
| $(INTERNAL_SDK_TARGET): PRIVATE_NAME := $(sdk_name) |
| $(INTERNAL_SDK_TARGET): PRIVATE_DIR := $(sdk_dir)/$(sdk_name) |
| $(INTERNAL_SDK_TARGET): PRIVATE_DEP_FILE := $(sdk_dep_file) |
| $(INTERNAL_SDK_TARGET): PRIVATE_INPUT_FILES := $(sdk_atree_files) |
| |
| # Set SDK_GNU_ERROR to non-empty to fail when a GNU target is built. |
| # |
| #SDK_GNU_ERROR := true |
| |
| $(INTERNAL_SDK_TARGET): $(deps) |
| @echo "Package SDK: $@" |
| $(hide) rm -rf $(PRIVATE_DIR) $@ |
| $(hide) for f in $(target_gnu_MODULES); do \ |
| if [ -f $$f ]; then \ |
| echo SDK: $(if $(SDK_GNU_ERROR),ERROR:,warning:) \ |
| including GNU target $$f >&2; \ |
| FAIL=$(SDK_GNU_ERROR); \ |
| fi; \ |
| done; \ |
| if [ $$FAIL ]; then exit 1; fi |
| $(hide) ( \ |
| ATREE_STRIP="strip -x" \ |
| $(HOST_OUT_EXECUTABLES)/atree \ |
| $(addprefix -f ,$(PRIVATE_INPUT_FILES)) \ |
| -m $(PRIVATE_DEP_FILE) \ |
| -I . \ |
| -I $(PRODUCT_OUT) \ |
| -I $(HOST_OUT) \ |
| -I $(TARGET_COMMON_OUT_ROOT) \ |
| -v "PLATFORM_NAME=android-$(PLATFORM_VERSION)" \ |
| -v "OUT_DIR=$(OUT_DIR)" \ |
| -v "HOST_OUT=$(HOST_OUT)" \ |
| -v "TARGET_ARCH=$(TARGET_ARCH)" \ |
| -v "TARGET_CPU_ABI=$(TARGET_CPU_ABI)" \ |
| -v "DLL_EXTENSION=$(HOST_SHLIB_SUFFIX)" \ |
| -o $(PRIVATE_DIR) && \ |
| cp -f $(target_notice_file_txt) \ |
| $(PRIVATE_DIR)/system-images/android-$(PLATFORM_VERSION)/$(TARGET_CPU_ABI)/NOTICE.txt && \ |
| cp -f $(tools_notice_file_txt) $(PRIVATE_DIR)/platform-tools/NOTICE.txt && \ |
| HOST_OUT_EXECUTABLES=$(HOST_OUT_EXECUTABLES) HOST_OS=$(HOST_OS) \ |
| development/build/tools/sdk_clean.sh $(PRIVATE_DIR) && \ |
| chmod -R ug+rwX $(PRIVATE_DIR) && \ |
| cd $(dir $@) && zip -rq $(notdir $@) $(PRIVATE_NAME) \ |
| ) || ( rm -rf $(PRIVATE_DIR) $@ && exit 44 ) |
| |
| |
| # Is a Windows SDK requested? If so, we need some definitions from here |
| # in order to find the Linux SDK used to create the Windows one. |
| MAIN_SDK_NAME := $(sdk_name) |
| MAIN_SDK_DIR := $(sdk_dir) |
| MAIN_SDK_ZIP := $(INTERNAL_SDK_TARGET) |
| ifneq ($(filter win_sdk,$(MAKECMDGOALS)),) |
| include $(TOPDIR)development/build/tools/windows_sdk.mk |
| endif |
| |
| # ----------------------------------------------------------------- |
| # Findbugs |
| INTERNAL_FINDBUGS_XML_TARGET := $(PRODUCT_OUT)/findbugs.xml |
| INTERNAL_FINDBUGS_HTML_TARGET := $(PRODUCT_OUT)/findbugs.html |
| $(INTERNAL_FINDBUGS_XML_TARGET): $(ALL_FINDBUGS_FILES) |
| @echo UnionBugs: $@ |
| $(hide) prebuilt/common/findbugs/bin/unionBugs $(ALL_FINDBUGS_FILES) \ |
| > $@ |
| $(INTERNAL_FINDBUGS_HTML_TARGET): $(INTERNAL_FINDBUGS_XML_TARGET) |
| @echo ConvertXmlToText: $@ |
| $(hide) prebuilt/common/findbugs/bin/convertXmlToText -html:fancy.xsl \ |
| $(INTERNAL_FINDBUGS_XML_TARGET) > $@ |
| |
| # ----------------------------------------------------------------- |
| # Findbugs |
| |
| # ----------------------------------------------------------------- |
| # These are some additional build tasks that need to be run. |
| ifneq ($(dont_bother),true) |
| include $(sort $(wildcard $(BUILD_SYSTEM)/tasks/*.mk)) |
| -include $(sort $(wildcard vendor/*/build/tasks/*.mk)) |
| -include $(sort $(wildcard device/*/build/tasks/*.mk)) |
| endif |
| |
| # ----------------------------------------------------------------- |
| # Create SDK repository packages. Must be done after tasks/* since |
| # we need the addon rules defined. |
| ifneq ($(sdk_repo_goal),) |
| include $(TOPDIR)development/build/tools/sdk_repo.mk |
| endif |