| # |
| # Copyright (C) 2008 The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| ## |
| ## Common build system definitions. Mostly standard |
| ## commands for building various types of targets, which |
| ## are used by others to construct the final targets. |
| ## |
| |
| # These are variables we use to collect overall lists |
| # of things being processed. |
| |
| # Full paths to all of the documentation |
| ALL_DOCS:= |
| |
| # The short names of all of the targets in the system. |
| # For each element of ALL_MODULES, two other variables |
| # are defined: |
| # $(ALL_MODULES.$(target)).BUILT |
| # $(ALL_MODULES.$(target)).INSTALLED |
| # The BUILT variable contains LOCAL_BUILT_MODULE for that |
| # target, and the INSTALLED variable contains the LOCAL_INSTALLED_MODULE. |
| # Some targets may have multiple files listed in the BUILT and INSTALLED |
| # sub-variables. |
| ALL_MODULES:= |
| |
| # Full paths to targets that should be added to the "make droid" |
| # set of installed targets. |
| ALL_DEFAULT_INSTALLED_MODULES:= |
| |
| # The list of tags that have been defined by |
| # LOCAL_MODULE_TAGS. Each word in this variable maps |
| # to a corresponding ALL_MODULE_TAGS.<tagname> variable |
| # that contains all of the INSTALLED_MODULEs with that tag. |
| ALL_MODULE_TAGS:= |
| |
| # Similar to ALL_MODULE_TAGS, but contains the short names |
| # of all targets for a particular tag. The top-level variable |
| # won't have the list of tags; ust ALL_MODULE_TAGS to get |
| # the list of all known tags. (This means that this variable |
| # will always be empty; it's just here as a placeholder for |
| # its sub-variables.) |
| ALL_MODULE_NAME_TAGS:= |
| |
| # Full path to all files that are made by some tool |
| ALL_GENERATED_SOURCES:= |
| |
| # Full path to all asm, C, C++, lex and yacc generated C files. |
| # These all have an order-only dependency on the copied headers |
| ALL_C_CPP_ETC_OBJECTS:= |
| |
| # The list of dynamic binaries that haven't been stripped/compressed/etc. |
| ALL_ORIGINAL_DYNAMIC_BINARIES:= |
| |
| # These files go into the SDK |
| ALL_SDK_FILES:= |
| |
| # Files for dalvik. This is often build without building the rest of the OS. |
| INTERNAL_DALVIK_MODULES:= |
| |
| # All findbugs xml files |
| ALL_FINDBUGS_FILES:= |
| |
| # GPL module license files |
| ALL_GPL_MODULE_LICENSE_FILES:= |
| |
| # Target and host installed module's dependencies on shared libraries. |
| # They are list of "<module_name>:<installed_file>:lib1,lib2...". |
| TARGET_DEPENDENCIES_ON_SHARED_LIBRARIES := |
| $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_DEPENDENCIES_ON_SHARED_LIBRARIES := |
| HOST_DEPENDENCIES_ON_SHARED_LIBRARIES := |
| $(HOST_2ND_ARCH_VAR_PREFIX)HOST_DEPENDENCIES_ON_SHARED_LIBRARIES := |
| HOST_CROSS_DEPENDENCIES_ON_SHARED_LIBRARIES := |
| $(HOST_CROSS_2ND_ARCH_VAR_PREFIX)HOST_CROSS_DEPENDENCIES_ON_SHARED_LIBRARIES := |
| |
| # Generated class file names for Android resource. |
| # They are escaped and quoted so can be passed safely to a bash command. |
| ANDROID_RESOURCE_GENERATED_CLASSES := 'R.class' 'R$$*.class' 'Manifest.class' 'Manifest$$*.class' |
| |
| # Display names for various build targets |
| TARGET_DISPLAY := target |
| AUX_DISPLAY := aux |
| HOST_DISPLAY := host |
| HOST_CROSS_DISPLAY := host cross |
| |
| # All installed initrc files |
| ALL_INIT_RC_INSTALLED_PAIRS := |
| |
| # All installed vintf manifest fragments for a partition at |
| ALL_VINTF_MANIFEST_FRAGMENTS_LIST:= |
| |
| # All tests that should be skipped in presubmit check. |
| ALL_DISABLED_PRESUBMIT_TESTS := |
| |
| ########################################################### |
| ## Debugging; prints a variable list to stdout |
| ########################################################### |
| |
| # $(1): variable name list, not variable values |
| define print-vars |
| $(foreach var,$(1), \ |
| $(info $(var):) \ |
| $(foreach word,$($(var)), \ |
| $(info $(space)$(space)$(word)) \ |
| ) \ |
| ) |
| endef |
| |
| ########################################################### |
| ## Evaluates to true if the string contains the word true, |
| ## and empty otherwise |
| ## $(1): a var to test |
| ########################################################### |
| |
| define true-or-empty |
| $(filter true, $(1)) |
| endef |
| |
| ########################################################### |
| ## Rule for touching GCNO files. |
| ########################################################### |
| define gcno-touch-rule |
| $(2): $(1) |
| touch -c $$@ |
| endef |
| |
| ########################################################### |
| |
| ########################################################### |
| ## Retrieve the directory of the current makefile |
| ## Must be called before including any other makefile!! |
| ########################################################### |
| |
| # Figure out where we are. |
| define my-dir |
| $(strip \ |
| $(eval LOCAL_MODULE_MAKEFILE := $$(lastword $$(MAKEFILE_LIST))) \ |
| $(if $(filter $(BUILD_SYSTEM)/% $(OUT_DIR)/%,$(LOCAL_MODULE_MAKEFILE)), \ |
| $(error my-dir must be called before including any other makefile.) \ |
| , \ |
| $(patsubst %/,%,$(dir $(LOCAL_MODULE_MAKEFILE))) \ |
| ) \ |
| ) |
| endef |
| |
| |
| ########################################################### |
| ## Retrieve a list of all makefiles immediately below some directory |
| ########################################################### |
| |
| define all-makefiles-under |
| $(wildcard $(1)/*/Android.mk) |
| endef |
| |
| ########################################################### |
| ## Look under a directory for makefiles that don't have parent |
| ## makefiles. |
| ########################################################### |
| |
| # $(1): directory to search under |
| # Ignores $(1)/Android.mk |
| define first-makefiles-under |
| $(shell build/make/tools/findleaves.py $(FIND_LEAVES_EXCLUDES) \ |
| --mindepth=2 $(addprefix --dir=,$(1)) Android.mk) |
| endef |
| |
| ########################################################### |
| ## Retrieve a list of all makefiles immediately below your directory |
| ## Must be called before including any other makefile!! |
| ########################################################### |
| |
| define all-subdir-makefiles |
| $(call all-makefiles-under,$(call my-dir)) |
| endef |
| |
| ########################################################### |
| ## Look in the named list of directories for makefiles, |
| ## relative to the current directory. |
| ## Must be called before including any other makefile!! |
| ########################################################### |
| |
| # $(1): List of directories to look for under this directory |
| define all-named-subdir-makefiles |
| $(wildcard $(addsuffix /Android.mk, $(addprefix $(call my-dir)/,$(1)))) |
| endef |
| |
| ########################################################### |
| ## Find all of the directories under the named directories with |
| ## the specified name. |
| ## Meant to be used like: |
| ## INC_DIRS := $(call all-named-dirs-under,inc,.) |
| ########################################################### |
| |
| define all-named-dirs-under |
| $(call find-subdir-files,$(2) -type d -name "$(1)") |
| endef |
| |
| ########################################################### |
| ## Find all the directories under the current directory that |
| ## haves name that match $(1) |
| ########################################################### |
| |
| define all-subdir-named-dirs |
| $(call all-named-dirs-under,$(1),.) |
| endef |
| |
| ########################################################### |
| ## Find all of the files under the named directories with |
| ## the specified name. |
| ## Meant to be used like: |
| ## SRC_FILES := $(call all-named-files-under,*.h,src tests) |
| ########################################################### |
| |
| define all-named-files-under |
| $(call find-files-in-subdirs,$(LOCAL_PATH),"$(1)",$(2)) |
| endef |
| |
| ########################################################### |
| ## Find all of the files under the current directory with |
| ## the specified name. |
| ########################################################### |
| |
| define all-subdir-named-files |
| $(call all-named-files-under,$(1),.) |
| endef |
| |
| ########################################################### |
| ## Find all of the java files under the named directories. |
| ## Meant to be used like: |
| ## SRC_FILES := $(call all-java-files-under,src tests) |
| ########################################################### |
| |
| define all-java-files-under |
| $(call all-named-files-under,*.java,$(1)) |
| endef |
| |
| ########################################################### |
| ## Find all of the java files from here. Meant to be used like: |
| ## SRC_FILES := $(call all-subdir-java-files) |
| ########################################################### |
| |
| define all-subdir-java-files |
| $(call all-java-files-under,.) |
| endef |
| |
| ########################################################### |
| ## Find all of the c files under the named directories. |
| ## Meant to be used like: |
| ## SRC_FILES := $(call all-c-files-under,src tests) |
| ########################################################### |
| |
| define all-c-files-under |
| $(call all-named-files-under,*.c,$(1)) |
| endef |
| |
| ########################################################### |
| ## Find all of the c files from here. Meant to be used like: |
| ## SRC_FILES := $(call all-subdir-c-files) |
| ########################################################### |
| |
| define all-subdir-c-files |
| $(call all-c-files-under,.) |
| endef |
| |
| ########################################################### |
| ## Find all of the cpp files under the named directories. |
| ## LOCAL_CPP_EXTENSION is respected if set. |
| ## Meant to be used like: |
| ## SRC_FILES := $(call all-cpp-files-under,src tests) |
| ########################################################### |
| |
| define all-cpp-files-under |
| $(sort $(patsubst ./%,%, \ |
| $(shell cd $(LOCAL_PATH) ; \ |
| find -L $(1) -name "*$(or $(LOCAL_CPP_EXTENSION),.cpp)" -and -not -name ".*") \ |
| )) |
| endef |
| |
| ########################################################### |
| ## Find all of the cpp files from here. Meant to be used like: |
| ## SRC_FILES := $(call all-subdir-cpp-files) |
| ########################################################### |
| |
| define all-subdir-cpp-files |
| $(call all-cpp-files-under,.) |
| endef |
| |
| ########################################################### |
| ## Find all files named "I*.aidl" under the named directories, |
| ## which must be relative to $(LOCAL_PATH). The returned list |
| ## is relative to $(LOCAL_PATH). |
| ########################################################### |
| |
| define all-Iaidl-files-under |
| $(call all-named-files-under,I*.aidl,$(1)) |
| endef |
| |
| ########################################################### |
| ## Find all of the "I*.aidl" files under $(LOCAL_PATH). |
| ########################################################### |
| |
| define all-subdir-Iaidl-files |
| $(call all-Iaidl-files-under,.) |
| endef |
| |
| ########################################################### |
| ## Find all files named "*.vts" under the named directories, |
| ## which must be relative to $(LOCAL_PATH). The returned list |
| ## is relative to $(LOCAL_PATH). |
| ########################################################### |
| |
| define all-vts-files-under |
| $(call all-named-files-under,*.vts,$(1)) |
| endef |
| |
| ########################################################### |
| ## Find all of the "*.vts" files under $(LOCAL_PATH). |
| ########################################################### |
| |
| define all-subdir-vts-files |
| $(call all-vts-files-under,.) |
| endef |
| |
| ########################################################### |
| ## Find all of the logtags files under the named directories. |
| ## Meant to be used like: |
| ## SRC_FILES := $(call all-logtags-files-under,src) |
| ########################################################### |
| |
| define all-logtags-files-under |
| $(call all-named-files-under,*.logtags,$(1)) |
| endef |
| |
| ########################################################### |
| ## Find all of the .proto files under the named directories. |
| ## Meant to be used like: |
| ## SRC_FILES := $(call all-proto-files-under,src) |
| ########################################################### |
| |
| define all-proto-files-under |
| $(call all-named-files-under,*.proto,$(1)) |
| endef |
| |
| ########################################################### |
| ## Find all of the RenderScript files under the named directories. |
| ## Meant to be used like: |
| ## SRC_FILES := $(call all-renderscript-files-under,src) |
| ########################################################### |
| |
| define all-renderscript-files-under |
| $(call find-subdir-files,$(1) \( -name "*.rs" -or -name "*.fs" \) -and -not -name ".*") |
| endef |
| |
| ########################################################### |
| ## Find all of the S files under the named directories. |
| ## Meant to be used like: |
| ## SRC_FILES := $(call all-c-files-under,src tests) |
| ########################################################### |
| |
| define all-S-files-under |
| $(call all-named-files-under,*.S,$(1)) |
| endef |
| |
| ########################################################### |
| ## Find all of the html files under the named directories. |
| ## Meant to be used like: |
| ## SRC_FILES := $(call all-html-files-under,src tests) |
| ########################################################### |
| |
| define all-html-files-under |
| $(call all-named-files-under,*.html,$(1)) |
| endef |
| |
| ########################################################### |
| ## Find all of the html files from here. Meant to be used like: |
| ## SRC_FILES := $(call all-subdir-html-files) |
| ########################################################### |
| |
| define all-subdir-html-files |
| $(call all-html-files-under,.) |
| endef |
| |
| ########################################################### |
| ## Find all of the files matching pattern |
| ## SRC_FILES := $(call find-subdir-files, <pattern>) |
| ########################################################### |
| |
| define find-subdir-files |
| $(sort $(patsubst ./%,%,$(shell cd $(LOCAL_PATH) ; find -L $(1)))) |
| endef |
| |
| ########################################################### |
| # find the files in the subdirectory $1 of LOCAL_DIR |
| # matching pattern $2, filtering out files $3 |
| # e.g. |
| # SRC_FILES += $(call find-subdir-subdir-files, \ |
| # css, *.cpp, DontWantThis.cpp) |
| ########################################################### |
| |
| define find-subdir-subdir-files |
| $(sort $(filter-out $(patsubst %,$(1)/%,$(3)),$(patsubst ./%,%,$(shell cd \ |
| $(LOCAL_PATH) ; find -L $(1) -maxdepth 1 -name $(2))))) |
| endef |
| |
| ########################################################### |
| ## Find all of the files matching pattern |
| ## SRC_FILES := $(call all-subdir-java-files) |
| ########################################################### |
| |
| define find-subdir-assets |
| $(sort $(if $(1),$(patsubst ./%,%, \ |
| $(shell if [ -d $(1) ] ; then cd $(1) ; find -L ./ -not -name '.*' -and -type f ; fi)), \ |
| $(warning Empty argument supplied to find-subdir-assets in $(LOCAL_PATH)) \ |
| )) |
| endef |
| |
| ########################################################### |
| ## Find various file types in a list of directories relative to $(LOCAL_PATH) |
| ########################################################### |
| |
| define find-other-java-files |
| $(call all-java-files-under,$(1)) |
| endef |
| |
| define find-other-html-files |
| $(call all-html-files-under,$(1)) |
| endef |
| |
| ########################################################### |
| # Use utility find to find given files in the given subdirs. |
| # This function uses $(1), instead of LOCAL_PATH as the base. |
| # $(1): the base dir, relative to the root of the source tree. |
| # $(2): the file name pattern to be passed to find as "-name". |
| # $(3): a list of subdirs of the base dir. |
| # Returns: a list of paths relative to the base dir. |
| ########################################################### |
| |
| define find-files-in-subdirs |
| $(sort $(patsubst ./%,%, \ |
| $(shell cd $(1) ; \ |
| find -L $(3) -name $(2) -and -not -name ".*") \ |
| )) |
| endef |
| |
| ########################################################### |
| ## Scan through each directory of $(1) looking for files |
| ## that match $(2) using $(wildcard). Useful for seeing if |
| ## a given directory or one of its parents contains |
| ## a particular file. Returns the first match found, |
| ## starting furthest from the root. |
| ########################################################### |
| |
| define find-parent-file |
| $(strip \ |
| $(eval _fpf := $(sort $(wildcard $(foreach f, $(2), $(strip $(1))/$(f))))) \ |
| $(if $(_fpf),$(_fpf), \ |
| $(if $(filter-out ./ .,$(1)), \ |
| $(call find-parent-file,$(patsubst %/,%,$(dir $(1))),$(2)) \ |
| ) \ |
| ) \ |
| ) |
| endef |
| |
| ########################################################### |
| ## Find test data in a form required by LOCAL_TEST_DATA |
| ## $(1): the base dir, relative to the root of the source tree. |
| ## $(2): the file name pattern to be passed to find as "-name" |
| ## $(3): a list of subdirs of the base dir |
| ########################################################### |
| |
| define find-test-data-in-subdirs |
| $(foreach f,$(sort $(patsubst ./%,%, \ |
| $(shell cd $(1) ; \ |
| find -L $(3) -type f -and -name $(2) -and -not -name ".*") \ |
| )),$(1):$(f)) |
| endef |
| |
| ########################################################### |
| ## Function we can evaluate to introduce a dynamic dependency |
| ########################################################### |
| |
| define add-dependency |
| $(1): $(2) |
| endef |
| |
| ########################################################### |
| ## Reverse order of a list |
| ########################################################### |
| |
| define reverse-list |
| $(if $(1),$(call reverse-list,$(wordlist 2,$(words $(1)),$(1)))) $(firstword $(1)) |
| endef |
| |
| define def-host-aux-target |
| $(eval _idf_val_:=$(if $(strip $(LOCAL_IS_HOST_MODULE)),HOST,$(if $(strip $(LOCAL_IS_AUX_MODULE)),AUX,))) \ |
| $(_idf_val_) |
| endef |
| |
| ########################################################### |
| ## Returns correct _idfPrefix from the list: |
| ## { HOST, HOST_CROSS, AUX, TARGET } |
| ########################################################### |
| # the following rules checked in order: |
| # ($1 is in {AUX, HOST_CROSS} => $1; |
| # ($1 is empty) => TARGET; |
| # ($2 is not empty) => HOST_CROSS; |
| # => HOST; |
| define find-idf-prefix |
| $(strip \ |
| $(eval _idf_pfx_:=$(strip $(filter AUX HOST_CROSS,$(1)))) \ |
| $(eval _idf_pfx_:=$(if $(strip $(1)),$(if $(_idf_pfx_),$(_idf_pfx_),$(if $(strip $(2)),HOST_CROSS,HOST)),TARGET)) \ |
| $(_idf_pfx_) |
| ) |
| endef |
| |
| ########################################################### |
| ## The intermediates directory. Where object files go for |
| ## a given target. We could technically get away without |
| ## the "_intermediates" suffix on the directory, but it's |
| ## nice to be able to grep for that string to find out if |
| ## anyone's abusing the system. |
| ########################################################### |
| |
| # $(1): target class, like "APPS" |
| # $(2): target name, like "NotePad" |
| # $(3): { HOST, HOST_CROSS, AUX, <empty (TARGET)>, <other non-empty (HOST)> } |
| # $(4): if non-empty, force the intermediates to be COMMON |
| # $(5): if non-empty, force the intermediates to be for the 2nd arch |
| # $(6): if non-empty, force the intermediates to be for the host cross os |
| define intermediates-dir-for |
| $(strip \ |
| $(eval _idfClass := $(strip $(1))) \ |
| $(if $(_idfClass),, \ |
| $(error $(LOCAL_PATH): Class not defined in call to intermediates-dir-for)) \ |
| $(eval _idfName := $(strip $(2))) \ |
| $(if $(_idfName),, \ |
| $(error $(LOCAL_PATH): Name not defined in call to intermediates-dir-for)) \ |
| $(eval _idfPrefix := $(call find-idf-prefix,$(3),$(6))) \ |
| $(eval _idf2ndArchPrefix := $(if $(strip $(5)),$(TARGET_2ND_ARCH_VAR_PREFIX))) \ |
| $(if $(filter $(_idfPrefix)-$(_idfClass),$(COMMON_MODULE_CLASSES))$(4), \ |
| $(eval _idfIntBase := $($(_idfPrefix)_OUT_COMMON_INTERMEDIATES)) \ |
| ,$(if $(filter $(_idfClass),$(PER_ARCH_MODULE_CLASSES)),\ |
| $(eval _idfIntBase := $($(_idf2ndArchPrefix)$(_idfPrefix)_OUT_INTERMEDIATES)) \ |
| ,$(eval _idfIntBase := $($(_idfPrefix)_OUT_INTERMEDIATES)) \ |
| ) \ |
| ) \ |
| $(_idfIntBase)/$(_idfClass)/$(_idfName)_intermediates \ |
| ) |
| endef |
| |
| # Uses LOCAL_MODULE_CLASS, LOCAL_MODULE, and LOCAL_IS_HOST_MODULE |
| # to determine the intermediates directory. |
| # |
| # $(1): if non-empty, force the intermediates to be COMMON |
| # $(2): if non-empty, force the intermediates to be for the 2nd arch |
| # $(3): if non-empty, force the intermediates to be for the host cross os |
| define local-intermediates-dir |
| $(strip \ |
| $(if $(strip $(LOCAL_MODULE_CLASS)),, \ |
| $(error $(LOCAL_PATH): LOCAL_MODULE_CLASS not defined before call to local-intermediates-dir)) \ |
| $(if $(strip $(LOCAL_MODULE)),, \ |
| $(error $(LOCAL_PATH): LOCAL_MODULE not defined before call to local-intermediates-dir)) \ |
| $(call intermediates-dir-for,$(LOCAL_MODULE_CLASS),$(LOCAL_MODULE),$(call def-host-aux-target),$(1),$(2),$(3)) \ |
| ) |
| endef |
| |
| ########################################################### |
| ## The generated sources directory. Placing generated |
| ## source files directly in the intermediates directory |
| ## causes problems for multiarch builds, where there are |
| ## two intermediates directories for a single target. Put |
| ## them in a separate directory, and they will be copied to |
| ## each intermediates directory automatically. |
| ########################################################### |
| |
| # $(1): target class, like "APPS" |
| # $(2): target name, like "NotePad" |
| # $(3): { HOST, HOST_CROSS, AUX, <empty (TARGET)>, <other non-empty (HOST)> } |
| # $(4): if non-empty, force the generated sources to be COMMON |
| define generated-sources-dir-for |
| $(strip \ |
| $(eval _idfClass := $(strip $(1))) \ |
| $(if $(_idfClass),, \ |
| $(error $(LOCAL_PATH): Class not defined in call to generated-sources-dir-for)) \ |
| $(eval _idfName := $(strip $(2))) \ |
| $(if $(_idfName),, \ |
| $(error $(LOCAL_PATH): Name not defined in call to generated-sources-dir-for)) \ |
| $(eval _idfPrefix := $(call find-idf-prefix,$(3),)) \ |
| $(if $(filter $(_idfPrefix)-$(_idfClass),$(COMMON_MODULE_CLASSES))$(4), \ |
| $(eval _idfIntBase := $($(_idfPrefix)_OUT_COMMON_GEN)) \ |
| , \ |
| $(eval _idfIntBase := $($(_idfPrefix)_OUT_GEN)) \ |
| ) \ |
| $(_idfIntBase)/$(_idfClass)/$(_idfName)_intermediates \ |
| ) |
| endef |
| |
| # Uses LOCAL_MODULE_CLASS, LOCAL_MODULE, and LOCAL_IS_HOST_MODULE |
| # to determine the generated sources directory. |
| # |
| # $(1): if non-empty, force the intermediates to be COMMON |
| define local-generated-sources-dir |
| $(strip \ |
| $(if $(strip $(LOCAL_MODULE_CLASS)),, \ |
| $(error $(LOCAL_PATH): LOCAL_MODULE_CLASS not defined before call to local-generated-sources-dir)) \ |
| $(if $(strip $(LOCAL_MODULE)),, \ |
| $(error $(LOCAL_PATH): LOCAL_MODULE not defined before call to local-generated-sources-dir)) \ |
| $(call generated-sources-dir-for,$(LOCAL_MODULE_CLASS),$(LOCAL_MODULE),$(call def-host-aux-target),$(1)) \ |
| ) |
| endef |
| |
| ########################################################### |
| ## Convert a list of short module names (e.g., "framework", "Browser") |
| ## into the list of files that are built for those modules. |
| ## NOTE: this won't return reliable results until after all |
| ## sub-makefiles have been included. |
| ## $(1): target list |
| ########################################################### |
| |
| define module-built-files |
| $(foreach module,$(1),$(ALL_MODULES.$(module).BUILT)) |
| endef |
| |
| ########################################################### |
| ## Convert a list of short modules names (e.g., "framework", "Browser") |
| ## into the list of files that are installed for those modules. |
| ## NOTE: this won't return reliable results until after all |
| ## sub-makefiles have been included. |
| ## $(1): target list |
| ########################################################### |
| |
| define module-installed-files |
| $(foreach module,$(1),$(ALL_MODULES.$(module).INSTALLED)) |
| endef |
| |
| ########################################################### |
| ## Convert a list of short modules names (e.g., "framework", "Browser") |
| ## into the list of files that should be used when linking |
| ## against that module as a public API. |
| ## TODO: Allow this for more than JAVA_LIBRARIES modules |
| ## NOTE: this won't return reliable results until after all |
| ## sub-makefiles have been included. |
| ## $(1): target list |
| ########################################################### |
| |
| define module-stubs-files |
| $(foreach module,$(1),$(if $(filter $(module),$(JAVA_SDK_LIBRARIES)),\ |
| $(call java-lib-files,$(module).stubs),$(ALL_MODULES.$(module).STUBS))) |
| endef |
| |
| ########################################################### |
| ## Evaluates to the timestamp file for a doc module, which |
| ## is the dependency that should be used. |
| ## $(1): doc module |
| ########################################################### |
| |
| define doc-timestamp-for |
| $(OUT_DOCS)/$(strip $(1))-timestamp |
| endef |
| |
| |
| ########################################################### |
| ## Convert "core ext framework" to "out/.../javalib.jar ..." |
| ## $(1): library list |
| ## $(2): Non-empty if IS_HOST_MODULE |
| ########################################################### |
| |
| # Get the jar files (you can pass to "javac -classpath") of static or shared |
| # Java libraries that you want to link against. |
| # $(1): library name list |
| # $(2): Non-empty if IS_HOST_MODULE |
| define java-lib-files |
| $(foreach lib,$(1),$(call intermediates-dir-for,JAVA_LIBRARIES,$(lib),$(2),COMMON)/classes.jar) |
| endef |
| |
| # Get the header jar files (you can pass to "javac -classpath") of static or shared |
| # Java libraries that you want to link against. |
| # $(1): library name list |
| # $(2): Non-empty if IS_HOST_MODULE |
| ifneq ($(TURBINE_ENABLED),false) |
| define java-lib-header-files |
| $(foreach lib,$(1),$(call intermediates-dir-for,JAVA_LIBRARIES,$(lib),$(2),COMMON)/classes-header.jar) |
| endef |
| else |
| define java-lib-header-files |
| $(call java-lib-files,$(1),$(2)) |
| endef |
| endif |
| |
| # Get the dependency files (you can put on the right side of "|" of a build rule) |
| # of the Java libraries. |
| # $(1): library name list |
| # $(2): Non-empty if IS_HOST_MODULE |
| # Historically for target Java libraries we used a different file (javalib.jar) |
| # as the dependency. |
| # Now we can use classes.jar as dependency, so java-lib-deps is the same |
| # as java-lib-files. |
| define java-lib-deps |
| $(call java-lib-files,$(1),$(2)) |
| endef |
| |
| # Get the jar files (you can pass to "javac -classpath") of static or shared |
| # APK libraries that you want to link against. |
| # $(1): library name list |
| define app-lib-files |
| $(foreach lib,$(1),$(call intermediates-dir-for,APPS,$(lib),,COMMON)/classes.jar) |
| endef |
| |
| # Get the header jar files (you can pass to "javac -classpath") of static or shared |
| # APK libraries that you want to link against. |
| # $(1): library name list |
| ifneq ($(TURBINE_ENABLED),false) |
| define app-lib-header-files |
| $(foreach lib,$(1),$(call intermediates-dir-for,APPS,$(lib),,COMMON)/classes-header.jar) |
| endef |
| else |
| define app-lib-header-files |
| $(call app-lib-files,$(1)) |
| endef |
| endif |
| |
| # Get the exported-sdk-libs files which collectively give you the list of exported java sdk |
| # lib names that are (transitively) exported from the given set of java libs |
| # $(1): library name list |
| define exported-sdk-libs-files |
| $(foreach lib,$(1),$(call intermediates-dir-for,JAVA_LIBRARIES,$(lib),,COMMON)/exported-sdk-libs) |
| endef |
| |
| ########################################################### |
| ## Returns true if $(1) and $(2) are equal. Returns |
| ## the empty string if they are not equal. |
| ########################################################### |
| define streq |
| $(strip $(if $(strip $(1)),\ |
| $(if $(strip $(2)),\ |
| $(if $(filter-out __,_$(subst $(strip $(1)),,$(strip $(2)))$(subst $(strip $(2)),,$(strip $(1)))_),,true), \ |
| ),\ |
| $(if $(strip $(2)),\ |
| ,\ |
| true)\ |
| )) |
| endef |
| |
| ########################################################### |
| ## Convert "a b c" into "a:b:c" |
| ########################################################### |
| define normalize-path-list |
| $(subst $(space),:,$(strip $(1))) |
| endef |
| |
| ########################################################### |
| ## Convert "a b c" into "a,b,c" |
| ########################################################### |
| define normalize-comma-list |
| $(subst $(space),$(comma),$(strip $(1))) |
| endef |
| |
| ########################################################### |
| ## Read the word out of a colon-separated list of words. |
| ## This has the same behavior as the built-in function |
| ## $(word n,str). |
| ## |
| ## The individual words may not contain spaces. |
| ## |
| ## $(1): 1 based index |
| ## $(2): value of the form a:b:c... |
| ########################################################### |
| |
| define word-colon |
| $(word $(1),$(subst :,$(space),$(2))) |
| endef |
| |
| ########################################################### |
| ## Convert "a=b c= d e = f" into "a=b c=d e=f" |
| ## |
| ## $(1): list to collapse |
| ## $(2): if set, separator word; usually "=", ":", or ":=" |
| ## Defaults to "=" if not set. |
| ########################################################### |
| |
| define collapse-pairs |
| $(eval _cpSEP := $(strip $(if $(2),$(2),=)))\ |
| $(strip $(subst $(space)$(_cpSEP)$(space),$(_cpSEP),$(strip \ |
| $(subst $(_cpSEP), $(_cpSEP) ,$(1)))$(space))) |
| endef |
| |
| ########################################################### |
| ## Given a list of pairs, if multiple pairs have the same |
| ## first components, keep only the first pair. |
| ## |
| ## $(1): list of pairs |
| ## $(2): the separator word, such as ":", "=", etc. |
| define uniq-pairs-by-first-component |
| $(eval _upbfc_fc_set :=)\ |
| $(strip $(foreach w,$(1), $(eval _first := $(word 1,$(subst $(2),$(space),$(w))))\ |
| $(if $(filter $(_upbfc_fc_set),$(_first)),,$(w)\ |
| $(eval _upbfc_fc_set += $(_first)))))\ |
| $(eval _upbfc_fc_set :=)\ |
| $(eval _first:=) |
| endef |
| |
| ########################################################### |
| ## MODULE_TAG set operations |
| ########################################################### |
| |
| # Given a list of tags, return the targets that specify |
| # any of those tags. |
| # $(1): tag list |
| define modules-for-tag-list |
| $(sort $(foreach tag,$(1),$(foreach m,$(ALL_MODULE_NAME_TAGS.$(tag)),$(ALL_MODULES.$(m).INSTALLED)))) |
| endef |
| |
| # Same as modules-for-tag-list, but operates on |
| # ALL_MODULE_NAME_TAGS. |
| # $(1): tag list |
| define module-names-for-tag-list |
| $(sort $(foreach tag,$(1),$(ALL_MODULE_NAME_TAGS.$(tag)))) |
| endef |
| |
| # Given an accept and reject list, find the matching |
| # set of targets. If a target has multiple tags and |
| # any of them are rejected, the target is rejected. |
| # Reject overrides accept. |
| # $(1): list of tags to accept |
| # $(2): list of tags to reject |
| #TODO(dbort): do $(if $(strip $(1)),$(1),$(ALL_MODULE_TAGS)) |
| #TODO(jbq): as of 20100106 nobody uses the second parameter |
| define get-tagged-modules |
| $(filter-out \ |
| $(call modules-for-tag-list,$(2)), \ |
| $(call modules-for-tag-list,$(1))) |
| endef |
| |
| ########################################################### |
| ## Append a leaf to a base path. Properly deals with |
| ## base paths ending in /. |
| ## |
| ## $(1): base path |
| ## $(2): leaf path |
| ########################################################### |
| |
| define append-path |
| $(subst //,/,$(1)/$(2)) |
| endef |
| |
| |
| ########################################################### |
| ## Color-coded warnings and errors |
| ## Use echo-(warning|error) in a build rule |
| ## Use pretty-(warning|error) instead of $(warning)/$(error) |
| ########################################################### |
| ESC_BOLD := \033[1m |
| ESC_WARNING := \033[35m |
| ESC_ERROR := \033[31m |
| ESC_RESET := \033[0m |
| |
| # $(1): path (and optionally line) information |
| # $(2): message to print |
| define echo-warning |
| echo -e "$(ESC_BOLD)$(1): $(ESC_WARNING)warning:$(ESC_RESET)$(ESC_BOLD)" $(2) "$(ESC_RESET)" >&2 |
| endef |
| |
| # $(1): path (and optionally line) information |
| # $(2): message to print |
| define echo-error |
| echo -e "$(ESC_BOLD)$(1): $(ESC_ERROR)error:$(ESC_RESET)$(ESC_BOLD)" $(2) "$(ESC_RESET)" >&2 |
| endef |
| |
| # $(1): message to print |
| define pretty-warning |
| $(shell $(call echo-warning,$(LOCAL_MODULE_MAKEFILE),$(LOCAL_MODULE): $(1))) |
| endef |
| |
| # $(1): message to print |
| define pretty-error |
| $(shell $(call echo-error,$(LOCAL_MODULE_MAKEFILE),$(LOCAL_MODULE): $(1))) |
| $(error done) |
| endef |
| |
| ########################################################### |
| ## Package filtering |
| ########################################################### |
| |
| # Given a list of installed modules (short or long names) |
| # return a list of the packages (yes, .apk packages, not |
| # modules in general) that are overridden by this list and, |
| # therefore, should not be installed. |
| # $(1): mixed list of installed modules |
| # TODO: This is fragile; find a reliable way to get this information. |
| define _get-package-overrides |
| $(eval ### Discard any words containing slashes, unless they end in .apk, \ |
| ### in which case trim off the directory component and the suffix. \ |
| ### If there are no slashes, keep the entire word.) |
| $(eval _gpo_names := $(subst /,@@@ @@@,$(1))) |
| $(eval _gpo_names := \ |
| $(filter %.apk,$(_gpo_names)) \ |
| $(filter-out %@@@ @@@%,$(_gpo_names))) |
| $(eval _gpo_names := $(patsubst %.apk,%,$(_gpo_names))) |
| $(eval _gpo_names := $(patsubst @@@%,%,$(_gpo_names))) |
| |
| $(eval ### Remove any remaining words that contain dots.) |
| $(eval _gpo_names := $(subst .,@@@ @@@,$(_gpo_names))) |
| $(eval _gpo_names := $(filter-out %@@@ @@@%,$(_gpo_names))) |
| |
| $(eval ### Now we have a list of any words that could possibly refer to \ |
| ### packages, although there may be words that do not. Only \ |
| ### real packages will be present under PACKAGES.*, though.) |
| $(foreach _gpo_name,$(_gpo_names),$(PACKAGES.$(_gpo_name).OVERRIDES)) |
| endef |
| |
| define get-package-overrides |
| $(sort $(strip $(call _get-package-overrides,$(1)))) |
| endef |
| |
| ########################################################### |
| ## Output the command lines, or not |
| ########################################################### |
| |
| ifeq ($(strip $(SHOW_COMMANDS)),) |
| define pretty |
| @echo $1 |
| endef |
| else |
| define pretty |
| endef |
| endif |
| |
| ########################################################### |
| ## Commands for including the dependency files the compiler generates |
| ########################################################### |
| # $(1): the .P file |
| # $(2): the main build target |
| define include-depfile |
| $(eval $(2) : .KATI_DEPFILE := $1) |
| endef |
| |
| # $(1): object files |
| define include-depfiles-for-objs |
| $(foreach obj, $(1), $(call include-depfile, $(obj:%.o=%.d), $(obj))) |
| endef |
| |
| ########################################################### |
| ## Track source files compiled to objects |
| ########################################################### |
| # $(1): list of sources |
| # $(2): list of matching objects |
| define track-src-file-obj |
| $(eval $(call _track-src-file-obj,$(1))) |
| endef |
| define _track-src-file-obj |
| i := w |
| $(foreach s,$(1), |
| my_tracked_src_files += $(s) |
| my_src_file_obj_$(s) := $$(word $$(words $$(i)),$$(2)) |
| i += w) |
| endef |
| |
| # $(1): list of sources |
| # $(2): list of matching generated sources |
| define track-src-file-gen |
| $(eval $(call _track-src-file-gen,$(2))) |
| endef |
| define _track-src-file-gen |
| i := w |
| $(foreach s,$(1), |
| my_tracked_gen_files += $(s) |
| my_src_file_gen_$(s) := $$(word $$(words $$(i)),$$(1)) |
| i += w) |
| endef |
| |
| # $(1): list of generated sources |
| # $(2): list of matching objects |
| define track-gen-file-obj |
| $(call track-src-file-obj,$(foreach f,$(1),\ |
| $(or $(my_src_file_gen_$(f)),$(f))),$(2)) |
| endef |
| |
| ########################################################### |
| ## Commands for running lex |
| ########################################################### |
| |
| define transform-l-to-c-or-cpp |
| @echo "Lex: $(PRIVATE_MODULE) <= $<" |
| @mkdir -p $(dir $@) |
| $(hide) $(LEX) -o$@ $< |
| endef |
| |
| ########################################################### |
| ## Commands for running yacc |
| ## |
| ########################################################### |
| |
| define transform-y-to-c-or-cpp |
| @echo "Yacc: $(PRIVATE_MODULE) <= $<" |
| @mkdir -p $(dir $@) |
| $(YACC) $(PRIVATE_YACCFLAGS) \ |
| --defines=$(basename $@).h \ |
| -o $@ $< |
| endef |
| |
| ########################################################### |
| ## Commands to compile RenderScript to Java |
| ########################################################### |
| |
| ## Merge multiple .d files generated by llvm-rs-cc. This is necessary |
| ## because ninja can handle only a single depfile per build target. |
| ## .d files generated by llvm-rs-cc define .stamp, .bc, and optionally |
| ## .java as build targets. However, there's no way to let ninja know |
| ## dependencies to .bc files and .java files, so we give up build |
| ## targets for them. As we write the .stamp file as the target by |
| ## ourselves, the awk script removes the first lines before the colon |
| ## and append a backslash to the last line to concatenate contents of |
| ## multiple files. |
| # $(1): .d files to be merged |
| # $(2): merged .d file |
| define _merge-renderscript-d |
| $(hide) echo '$@: $(backslash)' > $2 |
| $(foreach d,$1, \ |
| $(hide) awk 'start { sub(/( \\)?$$/, " \\"); print } /:/ { start=1 }' < $d >> $2$(newline)) |
| $(hide) echo >> $2 |
| endef |
| |
| # b/37755219 |
| RS_CC_ASAN_OPTIONS := ASAN_OPTIONS=detect_leaks=0:detect_container_overflow=0 |
| |
| define transform-renderscripts-to-java-and-bc |
| @echo "RenderScript: $(PRIVATE_MODULE) <= $(PRIVATE_RS_SOURCE_FILES)" |
| $(hide) rm -rf $(PRIVATE_RS_OUTPUT_DIR) |
| $(hide) mkdir -p $(PRIVATE_RS_OUTPUT_DIR)/res/raw |
| $(hide) mkdir -p $(PRIVATE_RS_OUTPUT_DIR)/src |
| $(hide) $(RS_CC_ASAN_OPTIONS) $(PRIVATE_RS_CC) \ |
| -o $(PRIVATE_RS_OUTPUT_DIR)/res/raw \ |
| -p $(PRIVATE_RS_OUTPUT_DIR)/src \ |
| -d $(PRIVATE_RS_OUTPUT_DIR) \ |
| -a $@ -MD \ |
| $(addprefix -target-api , $(PRIVATE_RS_TARGET_API)) \ |
| $(PRIVATE_RS_FLAGS) \ |
| $(foreach inc,$(PRIVATE_RS_INCLUDES),$(addprefix -I , $(inc))) \ |
| $(PRIVATE_RS_SOURCE_FILES) |
| $(SOONG_ZIP) -o $@ -C $(PRIVATE_RS_OUTPUT_DIR)/src -D $(PRIVATE_RS_OUTPUT_DIR)/src |
| $(SOONG_ZIP) -o $(PRIVATE_RS_OUTPUT_RES_ZIP) -C $(PRIVATE_RS_OUTPUT_DIR)/res -D $(PRIVATE_RS_OUTPUT_DIR)/res |
| $(call _merge-renderscript-d,$(PRIVATE_DEP_FILES),$@.d) |
| endef |
| |
| define transform-bc-to-so |
| @echo "Renderscript compatibility: $(notdir $@) <= $(notdir $<)" |
| $(hide) mkdir -p $(dir $@) |
| $(hide) $(BCC_COMPAT) -O3 -o $(dir $@)/$(notdir $(<:.bc=.o)) -fPIC -shared \ |
| -rt-path $(RS_PREBUILT_CLCORE) -mtriple $(RS_COMPAT_TRIPLE) $< |
| $(hide) $(PRIVATE_CXX) -shared -Wl,-soname,$(notdir $@) -nostdlib \ |
| -Wl,-rpath,\$$ORIGIN/../lib \ |
| $(dir $@)/$(notdir $(<:.bc=.o)) \ |
| $(RS_PREBUILT_COMPILER_RT) \ |
| -o $@ $(CLANG_TARGET_GLOBAL_LDFLAGS) -Wl,--hash-style=sysv \ |
| -L $(SOONG_OUT_DIR)/ndk/platforms/android-$(PRIVATE_SDK_VERSION)/arch-$(TARGET_ARCH)/usr/lib64 \ |
| -L $(SOONG_OUT_DIR)/ndk/platforms/android-$(PRIVATE_SDK_VERSION)/arch-$(TARGET_ARCH)/usr/lib \ |
| $(call intermediates-dir-for,SHARED_LIBRARIES,libRSSupport)/libRSSupport.so \ |
| -lm -lc |
| endef |
| |
| ########################################################### |
| ## Commands to compile RenderScript to C++ |
| ########################################################### |
| |
| define transform-renderscripts-to-cpp-and-bc |
| @echo "RenderScript: $(PRIVATE_MODULE) <= $(PRIVATE_RS_SOURCE_FILES)" |
| $(hide) rm -rf $(PRIVATE_RS_OUTPUT_DIR) |
| $(hide) mkdir -p $(PRIVATE_RS_OUTPUT_DIR)/ |
| $(hide) $(RS_CC_ASAN_OPTIONS) $(PRIVATE_RS_CC) \ |
| -o $(PRIVATE_RS_OUTPUT_DIR)/ \ |
| -d $(PRIVATE_RS_OUTPUT_DIR) \ |
| -a $@ -MD \ |
| -reflect-c++ \ |
| $(addprefix -target-api , $(PRIVATE_RS_TARGET_API)) \ |
| $(PRIVATE_RS_FLAGS) \ |
| $(addprefix -I , $(PRIVATE_RS_INCLUDES)) \ |
| $(PRIVATE_RS_SOURCE_FILES) |
| $(call _merge-renderscript-d,$(PRIVATE_DEP_FILES),$@.d) |
| $(hide) mkdir -p $(dir $@) |
| $(hide) touch $@ |
| endef |
| |
| |
| ########################################################### |
| ## Commands for running aidl |
| ########################################################### |
| |
| define transform-aidl-to-java |
| @mkdir -p $(dir $@) |
| @echo "Aidl: $(PRIVATE_MODULE) <= $<" |
| $(hide) $(AIDL) -d$(patsubst %.java,%.P,$@) $(PRIVATE_AIDL_FLAGS) $< $@ |
| endef |
| #$(AIDL) $(PRIVATE_AIDL_FLAGS) $< - | indent -nut -br -npcs -l1000 > $@ |
| |
| define transform-aidl-to-cpp |
| @mkdir -p $(dir $@) |
| @mkdir -p $(PRIVATE_HEADER_OUTPUT_DIR) |
| @echo "Generating C++ from AIDL: $(PRIVATE_MODULE) <= $<" |
| $(hide) $(AIDL_CPP) -d$(basename $@).aidl.d --ninja $(PRIVATE_AIDL_FLAGS) \ |
| $< $(PRIVATE_HEADER_OUTPUT_DIR) $@ |
| endef |
| |
| ## Given a .aidl file path, generate the rule to compile it a .java file |
| # $(1): a .aidl source file |
| # $(2): a directory to place the generated .java files in |
| # $(3): name of a variable to add the path to the generated source file to |
| # |
| # You must call this with $(eval). |
| define define-aidl-java-rule |
| define-aidl-java-rule-src := $(patsubst %.aidl,%.java,$(subst ../,dotdot/,$(addprefix $(2)/,$(1)))) |
| $$(define-aidl-java-rule-src) : $(LOCAL_PATH)/$(1) $(AIDL) |
| $$(transform-aidl-to-java) |
| $(3) += $$(define-aidl-java-rule-src) |
| endef |
| |
| ## Given a .aidl file path generate the rule to compile it a .cpp file. |
| # $(1): a .aidl source file |
| # $(2): a directory to place the generated .cpp files in |
| # $(3): name of a variable to add the path to the generated source file to |
| # |
| # You must call this with $(eval). |
| define define-aidl-cpp-rule |
| define-aidl-cpp-rule-src := $(patsubst %.aidl,%$(LOCAL_CPP_EXTENSION),$(subst ../,dotdot/,$(addprefix $(2)/,$(1)))) |
| $$(define-aidl-cpp-rule-src) : $(LOCAL_PATH)/$(1) $(AIDL_CPP) |
| $$(transform-aidl-to-cpp) |
| $(3) += $$(define-aidl-cpp-rule-src) |
| endef |
| |
| ########################################################### |
| ## Commands for running vts |
| ########################################################### |
| |
| define transform-vts-to-cpp |
| @mkdir -p $(dir $@) |
| @mkdir -p $(PRIVATE_HEADER_OUTPUT_DIR) |
| @echo "Generating C++ from VTS: $(PRIVATE_MODULE) <= $<" |
| $(hide) $(VTSC) -d$(basename $@).vts.P $(PRIVATE_VTS_FLAGS) \ |
| $< $(PRIVATE_HEADER_OUTPUT_DIR) $@ |
| endef |
| |
| ## Given a .vts file path generate the rule to compile it a .cpp file. |
| # $(1): a .vts source file |
| # $(2): a directory to place the generated .cpp files in |
| # $(3): name of a variable to add the path to the generated source file to |
| # |
| # You must call this with $(eval). |
| define define-vts-cpp-rule |
| define-vts-cpp-rule-src := $(patsubst %.vts,%$(LOCAL_CPP_EXTENSION),$(subst ../,dotdot/,$(addprefix $(2)/,$(1)))) |
| $$(define-vts-cpp-rule-src) : $(LOCAL_PATH)/$(1) $(VTSC) |
| $$(transform-vts-to-cpp) |
| $(3) += $$(define-vts-cpp-rule-src) |
| endef |
| |
| ########################################################### |
| ## Commands for running java-event-log-tags.py |
| ########################################################### |
| |
| define transform-logtags-to-java |
| @mkdir -p $(dir $@) |
| @echo "logtags: $@ <= $<" |
| $(hide) $(JAVATAGS) -o $@ $< $(PRIVATE_MERGED_TAG) |
| endef |
| |
| |
| ########################################################### |
| ## Commands for running protoc to compile .proto into .java |
| ########################################################### |
| |
| define transform-proto-to-java |
| @mkdir -p $(dir $@) |
| @echo "Protoc: $@ <= $(PRIVATE_PROTO_SRC_FILES)" |
| @rm -rf $(PRIVATE_PROTO_JAVA_OUTPUT_DIR) |
| @mkdir -p $(PRIVATE_PROTO_JAVA_OUTPUT_DIR) |
| $(hide) for f in $(PRIVATE_PROTO_SRC_FILES); do \ |
| $(PROTOC) \ |
| $(addprefix --proto_path=, $(PRIVATE_PROTO_INCLUDES)) \ |
| $(PRIVATE_PROTO_JAVA_OUTPUT_OPTION)="$(PRIVATE_PROTO_JAVA_OUTPUT_PARAMS):$(PRIVATE_PROTO_JAVA_OUTPUT_DIR)" \ |
| $(PRIVATE_PROTOC_FLAGS) \ |
| $$f || exit 33; \ |
| done |
| $(hide) touch $@ |
| endef |
| |
| ###################################################################### |
| ## Commands for running protoc to compile .proto into .pb.cc (or.pb.c) and .pb.h |
| ###################################################################### |
| |
| define transform-proto-to-cc |
| @echo "Protoc: $@ <= $<" |
| @mkdir -p $(dir $@) |
| $(hide) \ |
| $(PROTOC) \ |
| $(addprefix --proto_path=, $(PRIVATE_PROTO_INCLUDES)) \ |
| $(PRIVATE_PROTOC_FLAGS) \ |
| $< |
| @# aprotoc outputs only .cc. Rename it to .cpp if necessary. |
| $(if $(PRIVATE_RENAME_CPP_EXT),\ |
| $(hide) mv $(basename $@).cc $@) |
| endef |
| |
| ########################################################### |
| ## Helper to set include paths form transform-*-to-o |
| ########################################################### |
| define c-includes |
| $(addprefix -I , $(PRIVATE_C_INCLUDES)) \ |
| $$(cat $(PRIVATE_IMPORT_INCLUDES))\ |
| $(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),,\ |
| $(addprefix -I ,\ |
| $(filter-out $(PRIVATE_C_INCLUDES), \ |
| $(PRIVATE_GLOBAL_C_INCLUDES))) \ |
| $(addprefix -isystem ,\ |
| $(filter-out $(PRIVATE_C_INCLUDES), \ |
| $(PRIVATE_GLOBAL_C_SYSTEM_INCLUDES)))) |
| endef |
| |
| ########################################################### |
| ## Commands for running gcc to compile a C++ file |
| ########################################################### |
| |
| define transform-cpp-to-o-compiler-args |
| $(c-includes) \ |
| -c \ |
| $(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \ |
| $(PRIVATE_TARGET_GLOBAL_CFLAGS) \ |
| $(PRIVATE_TARGET_GLOBAL_CPPFLAGS) \ |
| $(PRIVATE_ARM_CFLAGS) \ |
| ) \ |
| $(PRIVATE_RTTI_FLAG) \ |
| $(PRIVATE_CFLAGS) \ |
| $(PRIVATE_CPPFLAGS) \ |
| $(PRIVATE_DEBUG_CFLAGS) \ |
| $(PRIVATE_CFLAGS_NO_OVERRIDE) \ |
| $(PRIVATE_CPPFLAGS_NO_OVERRIDE) |
| endef |
| |
| # PATH_TO_CLANG_TIDY_SHELL is defined in build/soong |
| define call-clang-tidy |
| CLANG_TIDY=$(PATH_TO_CLANG_TIDY) \ |
| $(PATH_TO_CLANG_TIDY_SHELL) \ |
| $(PRIVATE_TIDY_FLAGS) \ |
| -checks=$(PRIVATE_TIDY_CHECKS) |
| endef |
| |
| define clang-tidy-cpp |
| $(hide) $(call-clang-tidy) $< -- $(transform-cpp-to-o-compiler-args) |
| endef |
| |
| ifneq (,$(filter 1 true,$(WITH_TIDY_ONLY))) |
| define transform-cpp-to-o |
| $(if $(PRIVATE_TIDY_CHECKS), |
| @echo "$($(PRIVATE_PREFIX)DISPLAY) tidy $(PRIVATE_ARM_MODE) C++: $<" |
| $(clang-tidy-cpp)) |
| endef |
| else |
| define transform-cpp-to-o |
| @echo "$($(PRIVATE_PREFIX)DISPLAY) $(PRIVATE_ARM_MODE) C++: $(PRIVATE_MODULE) <= $<" |
| @mkdir -p $(dir $@) |
| $(if $(PRIVATE_TIDY_CHECKS),$(clang-tidy-cpp)) |
| $(hide) $(RELATIVE_PWD) $(PRIVATE_CXX) \ |
| $(transform-cpp-to-o-compiler-args) \ |
| -MD -MF $(patsubst %.o,%.d,$@) -o $@ $< |
| endef |
| endif |
| |
| |
| ########################################################### |
| ## Commands for running gcc to compile a C file |
| ########################################################### |
| |
| # $(1): extra flags |
| define transform-c-or-s-to-o-compiler-args |
| $(c-includes) \ |
| -c \ |
| $(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \ |
| $(PRIVATE_TARGET_GLOBAL_CFLAGS) \ |
| $(PRIVATE_TARGET_GLOBAL_CONLYFLAGS) \ |
| $(PRIVATE_ARM_CFLAGS) \ |
| ) \ |
| $(1) |
| endef |
| |
| define transform-c-to-o-compiler-args |
| $(call transform-c-or-s-to-o-compiler-args, \ |
| $(PRIVATE_CFLAGS) \ |
| $(PRIVATE_CONLYFLAGS) \ |
| $(PRIVATE_DEBUG_CFLAGS) \ |
| $(PRIVATE_CFLAGS_NO_OVERRIDE)) |
| endef |
| |
| define clang-tidy-c |
| $(hide) $(call-clang-tidy) $< -- $(transform-c-to-o-compiler-args) |
| endef |
| |
| ifneq (,$(filter 1 true,$(WITH_TIDY_ONLY))) |
| define transform-c-to-o |
| $(if $(PRIVATE_TIDY_CHECKS), |
| @echo "$($(PRIVATE_PREFIX)DISPLAY) tidy $(PRIVATE_ARM_MODE) C: $<" |
| $(clang-tidy-c)) |
| endef |
| else |
| define transform-c-to-o |
| @echo "$($(PRIVATE_PREFIX)DISPLAY) $(PRIVATE_ARM_MODE) C: $(PRIVATE_MODULE) <= $<" |
| @mkdir -p $(dir $@) |
| $(if $(PRIVATE_TIDY_CHECKS),$(clang-tidy-c)) |
| $(hide) $(RELATIVE_PWD) $(PRIVATE_CC) \ |
| $(transform-c-to-o-compiler-args) \ |
| -MD -MF $(patsubst %.o,%.d,$@) -o $@ $< |
| endef |
| endif |
| |
| define transform-s-to-o |
| @echo "$($(PRIVATE_PREFIX)DISPLAY) asm: $(PRIVATE_MODULE) <= $<" |
| @mkdir -p $(dir $@) |
| $(RELATIVE_PWD) $(PRIVATE_CC) \ |
| $(call transform-c-or-s-to-o-compiler-args, $(PRIVATE_ASFLAGS)) \ |
| -MD -MF $(patsubst %.o,%.d,$@) -o $@ $< |
| endef |
| |
| # YASM compilation |
| define transform-asm-to-o |
| @mkdir -p $(dir $@) |
| $(hide) $(YASM) \ |
| $(addprefix -I , $(PRIVATE_C_INCLUDES)) \ |
| $($(PRIVATE_2ND_ARCH_VAR_PREFIX)TARGET_GLOBAL_YASM_FLAGS) \ |
| $(PRIVATE_ASFLAGS) \ |
| -o $@ $< |
| endef |
| |
| ########################################################### |
| ## Commands for running gcc to compile an Objective-C file |
| ## This should never happen for target builds but this |
| ## will error at build time. |
| ########################################################### |
| |
| define transform-m-to-o |
| @echo "$($(PRIVATE_PREFIX)DISPLAY) ObjC: $(PRIVATE_MODULE) <= $<" |
| $(call transform-c-or-s-to-o, $(PRIVATE_CFLAGS) $(PRIVATE_DEBUG_CFLAGS)) |
| endef |
| |
| ########################################################### |
| ## Commands for running gcc to compile a host C++ file |
| ########################################################### |
| |
| define transform-host-cpp-to-o-compiler-args |
| $(c-includes) \ |
| -c \ |
| $(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \ |
| $(PRIVATE_HOST_GLOBAL_CFLAGS) \ |
| $(PRIVATE_HOST_GLOBAL_CPPFLAGS) \ |
| ) \ |
| $(PRIVATE_CFLAGS) \ |
| $(PRIVATE_CPPFLAGS) \ |
| $(PRIVATE_DEBUG_CFLAGS) \ |
| $(PRIVATE_CFLAGS_NO_OVERRIDE) \ |
| $(PRIVATE_CPPFLAGS_NO_OVERRIDE) |
| endef |
| |
| define clang-tidy-host-cpp |
| $(hide) $(call-clang-tidy) $< -- $(transform-host-cpp-to-o-compiler-args) |
| endef |
| |
| ifneq (,$(filter 1 true,$(WITH_TIDY_ONLY))) |
| define transform-host-cpp-to-o |
| $(if $(PRIVATE_TIDY_CHECKS), |
| @echo "tidy $($(PRIVATE_PREFIX)DISPLAY) C++: $<" |
| $(clang-tidy-host-cpp)) |
| endef |
| else |
| define transform-host-cpp-to-o |
| @echo "$($(PRIVATE_PREFIX)DISPLAY) C++: $(PRIVATE_MODULE) <= $<" |
| @mkdir -p $(dir $@) |
| $(if $(PRIVATE_TIDY_CHECKS),$(clang-tidy-host-cpp)) |
| $(hide) $(RELATIVE_PWD) $(PRIVATE_CXX) \ |
| $(transform-host-cpp-to-o-compiler-args) \ |
| -MD -MF $(patsubst %.o,%.d,$@) -o $@ $< |
| endef |
| endif |
| |
| |
| ########################################################### |
| ## Commands for running gcc to compile a host C file |
| ########################################################### |
| |
| define transform-host-c-or-s-to-o-common-args |
| $(c-includes) \ |
| -c \ |
| $(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \ |
| $(PRIVATE_HOST_GLOBAL_CFLAGS) \ |
| $(PRIVATE_HOST_GLOBAL_CONLYFLAGS) \ |
| ) |
| endef |
| |
| # $(1): extra flags |
| define transform-host-c-or-s-to-o |
| @mkdir -p $(dir $@) |
| $(hide) $(RELATIVE_PWD) $(PRIVATE_CC) \ |
| $(transform-host-c-or-s-to-o-common-args) \ |
| $(1) \ |
| -MD -MF $(patsubst %.o,%.d,$@) -o $@ $< |
| endef |
| |
| define transform-host-c-to-o-compiler-args |
| $(transform-host-c-or-s-to-o-common-args) \ |
| $(PRIVATE_CFLAGS) $(PRIVATE_CONLYFLAGS) \ |
| $(PRIVATE_DEBUG_CFLAGS) $(PRIVATE_CFLAGS_NO_OVERRIDE) |
| endef |
| |
| define clang-tidy-host-c |
| $(hide) $(call-clang-tidy) $< -- $(transform-host-c-to-o-compiler-args) |
| endef |
| |
| ifneq (,$(filter 1 true,$(WITH_TIDY_ONLY))) |
| define transform-host-c-to-o |
| $(if $(PRIVATE_TIDY_CHECKS), |
| @echo "tidy $($(PRIVATE_PREFIX)DISPLAY) C: $<" |
| $(clang-tidy-host-c)) |
| endef |
| else |
| define transform-host-c-to-o |
| @echo "$($(PRIVATE_PREFIX)DISPLAY) C: $(PRIVATE_MODULE) <= $<" |
| @mkdir -p $(dir $@) |
| $(if $(PRIVATE_TIDY_CHECKS), $(clang-tidy-host-c)) |
| $(hide) $(RELATIVE_PWD) $(PRIVATE_CC) \ |
| $(transform-host-c-to-o-compiler-args) \ |
| -MD -MF $(patsubst %.o,%.d,$@) -o $@ $< |
| endef |
| endif |
| |
| define transform-host-s-to-o |
| @echo "$($(PRIVATE_PREFIX)DISPLAY) asm: $(PRIVATE_MODULE) <= $<" |
| $(call transform-host-c-or-s-to-o, $(PRIVATE_ASFLAGS)) |
| endef |
| |
| ########################################################### |
| ## Commands for running gcc to compile a host Objective-C file |
| ########################################################### |
| |
| define transform-host-m-to-o |
| @echo "$($(PRIVATE_PREFIX)DISPLAY) ObjC: $(PRIVATE_MODULE) <= $<" |
| $(call transform-host-c-or-s-to-o, $(PRIVATE_CFLAGS) $(PRIVATE_DEBUG_CFLAGS) $(PRIVATE_CFLAGS_NO_OVERRIDE)) |
| endef |
| |
| ########################################################### |
| ## Commands for running gcc to compile a host Objective-C++ file |
| ########################################################### |
| |
| define transform-host-mm-to-o |
| $(transform-host-cpp-to-o) |
| endef |
| |
| |
| ########################################################### |
| ## Rules to compile a single C/C++ source with ../ in the path |
| ########################################################### |
| # Replace "../" in object paths with $(DOTDOT_REPLACEMENT). |
| DOTDOT_REPLACEMENT := dotdot/ |
| |
| ## Rule to compile a C++ source file with ../ in the path. |
| ## Must be called with $(eval). |
| # $(1): the C++ source file in LOCAL_SRC_FILES. |
| # $(2): the additional dependencies. |
| # $(3): the variable name to collect the output object file. |
| define compile-dotdot-cpp-file |
| o := $(intermediates)/$(patsubst %$(LOCAL_CPP_EXTENSION),%.o,$(subst ../,$(DOTDOT_REPLACEMENT),$(1))) |
| $$(o) : $(TOPDIR)$(LOCAL_PATH)/$(1) $(2) |
| $$(transform-$$(PRIVATE_HOST)cpp-to-o) |
| $$(call include-depfiles-for-objs, $$(o)) |
| $(3) += $$(o) |
| endef |
| |
| ## Rule to compile a C source file with ../ in the path. |
| ## Must be called with $(eval). |
| # $(1): the C source file in LOCAL_SRC_FILES. |
| # $(2): the additional dependencies. |
| # $(3): the variable name to collect the output object file. |
| define compile-dotdot-c-file |
| o := $(intermediates)/$(patsubst %.c,%.o,$(subst ../,$(DOTDOT_REPLACEMENT),$(1))) |
| $$(o) : $(TOPDIR)$(LOCAL_PATH)/$(1) $(2) |
| $$(transform-$$(PRIVATE_HOST)c-to-o) |
| $$(call include-depfiles-for-objs, $$(o)) |
| $(3) += $$(o) |
| endef |
| |
| ## Rule to compile a .S source file with ../ in the path. |
| ## Must be called with $(eval). |
| # $(1): the .S source file in LOCAL_SRC_FILES. |
| # $(2): the additional dependencies. |
| # $(3): the variable name to collect the output object file. |
| define compile-dotdot-s-file |
| o := $(intermediates)/$(patsubst %.S,%.o,$(subst ../,$(DOTDOT_REPLACEMENT),$(1))) |
| $$(o) : $(TOPDIR)$(LOCAL_PATH)/$(1) $(2) |
| $$(transform-$$(PRIVATE_HOST)s-to-o) |
| $$(call include-depfiles-for-objs, $$(o)) |
| $(3) += $$(o) |
| endef |
| |
| ## Rule to compile a .s source file with ../ in the path. |
| ## Must be called with $(eval). |
| # $(1): the .s source file in LOCAL_SRC_FILES. |
| # $(2): the additional dependencies. |
| # $(3): the variable name to collect the output object file. |
| define compile-dotdot-s-file-no-deps |
| o := $(intermediates)/$(patsubst %.s,%.o,$(subst ../,$(DOTDOT_REPLACEMENT),$(1))) |
| $$(o) : $(TOPDIR)$(LOCAL_PATH)/$(1) $(2) |
| $$(transform-$$(PRIVATE_HOST)s-to-o) |
| $(3) += $$(o) |
| endef |
| |
| ########################################################### |
| ## Commands for running ar |
| ########################################################### |
| |
| define _concat-if-arg2-not-empty |
| $(if $(2),$(hide) $(1) $(2)) |
| endef |
| |
| # Split long argument list into smaller groups and call the command repeatedly |
| # Call the command at least once even if there are no arguments, as otherwise |
| # the output file won't be created. |
| # |
| # $(1): the command without arguments |
| # $(2): the arguments |
| define split-long-arguments |
| $(hide) $(1) $(wordlist 1,500,$(2)) |
| $(call _concat-if-arg2-not-empty,$(1),$(wordlist 501,1000,$(2))) |
| $(call _concat-if-arg2-not-empty,$(1),$(wordlist 1001,1500,$(2))) |
| $(call _concat-if-arg2-not-empty,$(1),$(wordlist 1501,2000,$(2))) |
| $(call _concat-if-arg2-not-empty,$(1),$(wordlist 2001,2500,$(2))) |
| $(call _concat-if-arg2-not-empty,$(1),$(wordlist 2501,3000,$(2))) |
| $(call _concat-if-arg2-not-empty,$(1),$(wordlist 3001,99999,$(2))) |
| endef |
| |
| # $(1): the full path of the source static library. |
| # $(2): the full path of the destination static library. |
| define _extract-and-include-single-target-whole-static-lib |
| $(hide) ldir=$(PRIVATE_INTERMEDIATES_DIR)/WHOLE/$(basename $(notdir $(1)))_objs;\ |
| rm -rf $$ldir; \ |
| mkdir -p $$ldir; \ |
| cp $(1) $$ldir; \ |
| lib_to_include=$$ldir/$(notdir $(1)); \ |
| filelist=; \ |
| subdir=0; \ |
| for f in `$($(PRIVATE_2ND_ARCH_VAR_PREFIX)TARGET_AR) t $(1)`; do \ |
| if [ -e $$ldir/$$f ]; then \ |
| mkdir $$ldir/$$subdir; \ |
| ext=$$subdir/; \ |
| subdir=$$((subdir+1)); \ |
| $($(PRIVATE_2ND_ARCH_VAR_PREFIX)TARGET_AR) m $$lib_to_include $$f; \ |
| else \ |
| ext=; \ |
| fi; \ |
| $($(PRIVATE_2ND_ARCH_VAR_PREFIX)TARGET_AR) p $$lib_to_include $$f > $$ldir/$$ext$$f; \ |
| filelist="$$filelist $$ldir/$$ext$$f"; \ |
| done ; \ |
| $($(PRIVATE_2ND_ARCH_VAR_PREFIX)TARGET_AR) $($(PRIVATE_2ND_ARCH_VAR_PREFIX)TARGET_GLOBAL_ARFLAGS) \ |
| $(PRIVATE_ARFLAGS) $(2) $$filelist |
| |
| endef |
| |
| # $(1): the full path of the source static library. |
| # $(2): the full path of the destination static library. |
| define extract-and-include-whole-static-libs-first |
| $(if $(strip $(1)), |
| $(hide) cp $(1) $(2)) |
| endef |
| |
| # $(1): the full path of the destination static library. |
| define extract-and-include-target-whole-static-libs |
| $(call extract-and-include-whole-static-libs-first, $(firstword $(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES)),$(1)) |
| $(foreach lib,$(wordlist 2,999,$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES)), \ |
| $(call _extract-and-include-single-target-whole-static-lib, $(lib), $(1))) |
| endef |
| |
| # Explicitly delete the archive first so that ar doesn't |
| # try to add to an existing archive. |
| define transform-o-to-static-lib |
| @echo "$($(PRIVATE_PREFIX)DISPLAY) StaticLib: $(PRIVATE_MODULE) ($@)" |
| @mkdir -p $(dir $@) |
| @rm -f $@ $@.tmp |
| $(call extract-and-include-target-whole-static-libs,$@.tmp) |
| $(call split-long-arguments,$($(PRIVATE_2ND_ARCH_VAR_PREFIX)TARGET_AR) \ |
| $($(PRIVATE_2ND_ARCH_VAR_PREFIX)TARGET_GLOBAL_ARFLAGS) \ |
| $(PRIVATE_ARFLAGS) \ |
| $@.tmp,$(PRIVATE_ALL_OBJECTS)) |
| $(hide) mv -f $@.tmp $@ |
| endef |
| |
| # $(1): the full path of the source static library. |
| # $(2): the full path of the destination static library. |
| define _extract-and-include-single-aux-whole-static-lib |
| $(hide) ldir=$(PRIVATE_INTERMEDIATES_DIR)/WHOLE/$(basename $(notdir $(1)))_objs;\ |
| rm -rf $$ldir; \ |
| mkdir -p $$ldir; \ |
| cp $(1) $$ldir; \ |
| lib_to_include=$$ldir/$(notdir $(1)); \ |
| filelist=; \ |
| subdir=0; \ |
| for f in `$(PRIVATE_AR) t $(1)`; do \ |
| if [ -e $$ldir/$$f ]; then \ |
| mkdir $$ldir/$$subdir; \ |
| ext=$$subdir/; \ |
| subdir=$$((subdir+1)); \ |
| $(PRIVATE_AR) m $$lib_to_include $$f; \ |
| else \ |
| ext=; \ |
| fi; \ |
| $(PRIVATE_AR) p $$lib_to_include $$f > $$ldir/$$ext$$f; \ |
| filelist="$$filelist $$ldir/$$ext$$f"; \ |
| done ; \ |
| $(PRIVATE_AR) $(AUX_GLOBAL_ARFLAGS) $(2) $$filelist |
| |
| endef |
| |
| define extract-and-include-aux-whole-static-libs |
| $(call extract-and-include-whole-static-libs-first, $(firstword $(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES)),$(1)) |
| $(foreach lib,$(wordlist 2,999,$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES)), \ |
| $(call _extract-and-include-single-aux-whole-static-lib, $(lib), $(1))) |
| endef |
| |
| # Explicitly delete the archive first so that ar doesn't |
| # try to add to an existing archive. |
| define transform-o-to-aux-static-lib |
| @echo "$($(PRIVATE_PREFIX)DISPLAY) StaticLib: $(PRIVATE_MODULE) ($@)" |
| @mkdir -p $(dir $@) |
| @rm -f $@ $@.tmp |
| $(call extract-and-include-aux-whole-static-libs,$@.tmp) |
| $(call split-long-arguments,$(PRIVATE_AR) \ |
| $(AUX_GLOBAL_ARFLAGS) $@.tmp,$(PRIVATE_ALL_OBJECTS)) |
| $(hide) mv -f $@.tmp $@ |
| endef |
| |
| define transform-o-to-aux-executable-inner |
| $(hide) $(PRIVATE_CXX) -pie \ |
| -Bdynamic \ |
| -Wl,--gc-sections \ |
| $(PRIVATE_ALL_OBJECTS) \ |
| -Wl,--whole-archive \ |
| $(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES) \ |
| -Wl,--no-whole-archive \ |
| $(PRIVATE_ALL_STATIC_LIBRARIES) \ |
| $(PRIVATE_LDFLAGS) \ |
| -o $@ |
| endef |
| |
| define transform-o-to-aux-executable |
| @echo "$(AUX_DISPLAY) Executable: $(PRIVATE_MODULE) ($@)" |
| @mkdir -p $(dir $@) |
| $(transform-o-to-aux-executable-inner) |
| endef |
| |
| define transform-o-to-aux-static-executable-inner |
| $(hide) $(PRIVATE_CXX) \ |
| -Bstatic \ |
| -Wl,--gc-sections \ |
| $(PRIVATE_ALL_OBJECTS) \ |
| -Wl,--whole-archive \ |
| $(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES) \ |
| -Wl,--no-whole-archive \ |
| $(PRIVATE_ALL_STATIC_LIBRARIES) \ |
| $(PRIVATE_LDFLAGS) \ |
| -Wl,-Map=$(@).map \ |
| -o $@ |
| endef |
| |
| define transform-o-to-aux-static-executable |
| @echo "$(AUX_DISPLAY) StaticExecutable: $(PRIVATE_MODULE) ($@)" |
| @mkdir -p $(dir $@) |
| $(transform-o-to-aux-static-executable-inner) |
| endef |
| |
| ########################################################### |
| ## Commands for running host ar |
| ########################################################### |
| |
| # $(1): the full path of the source static library. |
| # $(2): the full path of the destination static library. |
| define _extract-and-include-single-host-whole-static-lib |
| $(hide) ldir=$(PRIVATE_INTERMEDIATES_DIR)/WHOLE/$(basename $(notdir $(1)))_objs;\ |
| rm -rf $$ldir; \ |
| mkdir -p $$ldir; \ |
| cp $(1) $$ldir; \ |
| lib_to_include=$$ldir/$(notdir $(1)); \ |
| filelist=; \ |
| subdir=0; \ |
| for f in `$($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)AR) t $(1) | \grep '\.o$$'`; do \ |
| if [ -e $$ldir/$$f ]; then \ |
| mkdir $$ldir/$$subdir; \ |
| ext=$$subdir/; \ |
| subdir=$$((subdir+1)); \ |
| $($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)AR) m $$lib_to_include $$f; \ |
| else \ |
| ext=; \ |
| fi; \ |
| $($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)AR) p $$lib_to_include $$f > $$ldir/$$ext$$f; \ |
| filelist="$$filelist $$ldir/$$ext$$f"; \ |
| done ; \ |
| $($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)AR) $($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)GLOBAL_ARFLAGS) \ |
| $(2) $$filelist |
| |
| endef |
| |
| define extract-and-include-host-whole-static-libs |
| $(call extract-and-include-whole-static-libs-first, $(firstword $(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES)),$(1)) |
| $(foreach lib,$(wordlist 2,999,$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES)), \ |
| $(call _extract-and-include-single-host-whole-static-lib, $(lib),$(1))) |
| endef |
| |
| ifeq ($(HOST_OS),darwin) |
| # On Darwin the host ar fails if there is nothing to add to .a at all. |
| # We work around by adding a dummy.o and then deleting it. |
| define create-dummy.o-if-no-objs |
| $(if $(PRIVATE_ALL_OBJECTS),,$(hide) touch $(dir $(1))dummy.o) |
| endef |
| |
| define get-dummy.o-if-no-objs |
| $(if $(PRIVATE_ALL_OBJECTS),,$(dir $(1))dummy.o) |
| endef |
| |
| define delete-dummy.o-if-no-objs |
| $(if $(PRIVATE_ALL_OBJECTS),,$(hide) $($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)AR) d $(1) $(dir $(1))dummy.o \ |
| && rm -f $(dir $(1))dummy.o) |
| endef |
| else |
| create-dummy.o-if-no-objs = |
| get-dummy.o-if-no-objs = |
| delete-dummy.o-if-no-objs = |
| endif # HOST_OS is darwin |
| |
| # Explicitly delete the archive first so that ar doesn't |
| # try to add to an existing archive. |
| define transform-host-o-to-static-lib |
| @echo "$($(PRIVATE_PREFIX)DISPLAY) StaticLib: $(PRIVATE_MODULE) ($@)" |
| @mkdir -p $(dir $@) |
| @rm -f $@ $@.tmp |
| $(call extract-and-include-host-whole-static-libs,$@.tmp) |
| $(call create-dummy.o-if-no-objs,$@.tmp) |
| $(call split-long-arguments,$($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)AR) \ |
| $($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)GLOBAL_ARFLAGS) $@.tmp,\ |
| $(PRIVATE_ALL_OBJECTS) $(call get-dummy.o-if-no-objs,$@.tmp)) |
| $(call delete-dummy.o-if-no-objs,$@.tmp) |
| $(hide) mv -f $@.tmp $@ |
| endef |
| |
| |
| ########################################################### |
| ## Commands for running gcc to link a shared library or package |
| ########################################################### |
| |
| # ld just seems to be so finicky with command order that we allow |
| # it to be overriden en-masse see combo/linux-arm.make for an example. |
| ifneq ($(HOST_CUSTOM_LD_COMMAND),true) |
| define transform-host-o-to-shared-lib-inner |
| $(hide) $(PRIVATE_CXX) \ |
| -Wl,-rpath-link=$($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)OUT_INTERMEDIATE_LIBRARIES) \ |
| -Wl,-rpath,\$$ORIGIN/../$(notdir $($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)OUT_SHARED_LIBRARIES)) \ |
| -Wl,-rpath,\$$ORIGIN/$(notdir $($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)OUT_SHARED_LIBRARIES)) \ |
| -shared -Wl,-soname,$(notdir $@) \ |
| $(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \ |
| $(PRIVATE_HOST_GLOBAL_LDFLAGS) \ |
| ) \ |
| $(PRIVATE_LDFLAGS) \ |
| $(PRIVATE_ALL_OBJECTS) \ |
| -Wl,--whole-archive \ |
| $(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES) \ |
| -Wl,--no-whole-archive \ |
| $(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--start-group) \ |
| $(PRIVATE_ALL_STATIC_LIBRARIES) \ |
| $(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--end-group) \ |
| $(if $(filter true,$(NATIVE_COVERAGE)),-lgcov) \ |
| $(if $(filter true,$(NATIVE_COVERAGE)),$(PRIVATE_HOST_LIBPROFILE_RT)) \ |
| $(PRIVATE_ALL_SHARED_LIBRARIES) \ |
| -o $@ \ |
| $(PRIVATE_LDLIBS) |
| endef |
| endif |
| |
| define transform-host-o-to-shared-lib |
| @echo "$($(PRIVATE_PREFIX)DISPLAY) SharedLib: $(PRIVATE_MODULE) ($@)" |
| @mkdir -p $(dir $@) |
| $(transform-host-o-to-shared-lib-inner) |
| endef |
| |
| define transform-host-o-to-package |
| @echo "$($(PRIVATE_PREFIX)DISPLAY) Package: $(PRIVATE_MODULE) ($@)" |
| @mkdir -p $(dir $@) |
| $(transform-host-o-to-shared-lib-inner) |
| endef |
| |
| |
| ########################################################### |
| ## Commands for running gcc to link a shared library or package |
| ########################################################### |
| |
| define transform-o-to-shared-lib-inner |
| $(hide) $(PRIVATE_CXX) \ |
| -nostdlib -Wl,-soname,$(notdir $@) \ |
| -Wl,--gc-sections \ |
| -shared \ |
| $(PRIVATE_TARGET_CRTBEGIN_SO_O) \ |
| $(PRIVATE_ALL_OBJECTS) \ |
| -Wl,--whole-archive \ |
| $(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES) \ |
| -Wl,--no-whole-archive \ |
| $(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--start-group) \ |
| $(PRIVATE_ALL_STATIC_LIBRARIES) \ |
| $(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--end-group) \ |
| $(if $(filter true,$(NATIVE_COVERAGE)),$(PRIVATE_TARGET_COVERAGE_LIB)) \ |
| $(PRIVATE_TARGET_LIBATOMIC) \ |
| $(PRIVATE_TARGET_LIBGCC) \ |
| $(PRIVATE_TARGET_GLOBAL_LDFLAGS) \ |
| $(PRIVATE_LDFLAGS) \ |
| $(PRIVATE_ALL_SHARED_LIBRARIES) \ |
| -o $@ \ |
| $(PRIVATE_TARGET_CRTEND_SO_O) \ |
| $(PRIVATE_LDLIBS) |
| endef |
| |
| define transform-o-to-shared-lib |
| @echo "$($(PRIVATE_PREFIX)DISPLAY) SharedLib: $(PRIVATE_MODULE) ($@)" |
| @mkdir -p $(dir $@) |
| $(transform-o-to-shared-lib-inner) |
| endef |
| |
| ########################################################### |
| ## Commands for running gcc to link an executable |
| ########################################################### |
| |
| define transform-o-to-executable-inner |
| $(hide) $(PRIVATE_CXX) -pie \ |
| -nostdlib -Bdynamic \ |
| -Wl,-dynamic-linker,$(PRIVATE_LINKER) \ |
| -Wl,--gc-sections \ |
| -Wl,-z,nocopyreloc \ |
| -Wl,-rpath-link=$(PRIVATE_TARGET_OUT_INTERMEDIATE_LIBRARIES) \ |
| $(PRIVATE_TARGET_CRTBEGIN_DYNAMIC_O) \ |
| $(PRIVATE_ALL_OBJECTS) \ |
| -Wl,--whole-archive \ |
| $(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES) \ |
| -Wl,--no-whole-archive \ |
| $(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--start-group) \ |
| $(PRIVATE_ALL_STATIC_LIBRARIES) \ |
| $(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--end-group) \ |
| $(if $(filter true,$(NATIVE_COVERAGE)),$(PRIVATE_TARGET_COVERAGE_LIB)) \ |
| $(PRIVATE_TARGET_LIBATOMIC) \ |
| $(PRIVATE_TARGET_LIBGCC) \ |
| $(PRIVATE_TARGET_GLOBAL_LDFLAGS) \ |
| $(PRIVATE_LDFLAGS) \ |
| $(PRIVATE_ALL_SHARED_LIBRARIES) \ |
| -o $@ \ |
| $(PRIVATE_TARGET_CRTEND_O) \ |
| $(PRIVATE_LDLIBS) |
| endef |
| |
| define transform-o-to-executable |
| @echo "$($(PRIVATE_PREFIX)DISPLAY) Executable: $(PRIVATE_MODULE) ($@)" |
| @mkdir -p $(dir $@) |
| $(transform-o-to-executable-inner) |
| endef |
| |
| |
| ########################################################### |
| ## Commands for linking a static executable. In practice, |
| ## we only use this on arm, so the other platforms don't |
| ## have transform-o-to-static-executable defined. |
| ## Clang driver needs -static to create static executable. |
| ## However, bionic/linker uses -shared to overwrite. |
| ## Linker for x86 targets does not allow coexistance of -static and -shared, |
| ## so we add -static only if -shared is not used. |
| ########################################################### |
| |
| define transform-o-to-static-executable-inner |
| $(hide) $(PRIVATE_CXX) \ |
| -nostdlib -Bstatic \ |
| $(if $(filter $(PRIVATE_LDFLAGS),-shared),,-static) \ |
| -Wl,--gc-sections \ |
| -o $@ \ |
| $(PRIVATE_TARGET_CRTBEGIN_STATIC_O) \ |
| $(PRIVATE_TARGET_GLOBAL_LDFLAGS) \ |
| $(PRIVATE_LDFLAGS) \ |
| $(PRIVATE_ALL_OBJECTS) \ |
| -Wl,--whole-archive \ |
| $(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES) \ |
| -Wl,--no-whole-archive \ |
| $(filter-out %libcompiler_rt.hwasan.a %libc_nomalloc.hwasan.a %libc.hwasan.a %libcompiler_rt.a %libc_nomalloc.a %libc.a,$(PRIVATE_ALL_STATIC_LIBRARIES)) \ |
| -Wl,--start-group \ |
| $(filter %libc.a %libc.hwasan.a,$(PRIVATE_ALL_STATIC_LIBRARIES)) \ |
| $(filter %libc_nomalloc.a %libc_nomalloc.hwasan.a,$(PRIVATE_ALL_STATIC_LIBRARIES)) \ |
| $(if $(filter true,$(NATIVE_COVERAGE)),$(PRIVATE_TARGET_COVERAGE_LIB)) \ |
| $(PRIVATE_TARGET_LIBATOMIC) \ |
| $(filter %libcompiler_rt.a %libcompiler_rt.hwasan.a,$(PRIVATE_ALL_STATIC_LIBRARIES)) \ |
| $(PRIVATE_TARGET_LIBGCC) \ |
| -Wl,--end-group \ |
| $(PRIVATE_TARGET_CRTEND_O) |
| endef |
| |
| define transform-o-to-static-executable |
| @echo "$($(PRIVATE_PREFIX)DISPLAY) StaticExecutable: $(PRIVATE_MODULE) ($@)" |
| @mkdir -p $(dir $@) |
| $(transform-o-to-static-executable-inner) |
| endef |
| |
| |
| ########################################################### |
| ## Commands for running gcc to link a host executable |
| ########################################################### |
| ifdef BUILD_HOST_static |
| HOST_FPIE_FLAGS := |
| else |
| HOST_FPIE_FLAGS := -pie |
| endif |
| |
| ifneq ($(HOST_CUSTOM_LD_COMMAND),true) |
| define transform-host-o-to-executable-inner |
| $(hide) $(PRIVATE_CXX) \ |
| $(PRIVATE_ALL_OBJECTS) \ |
| -Wl,--whole-archive \ |
| $(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES) \ |
| -Wl,--no-whole-archive \ |
| $(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--start-group) \ |
| $(PRIVATE_ALL_STATIC_LIBRARIES) \ |
| $(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--end-group) \ |
| $(if $(filter true,$(NATIVE_COVERAGE)),-lgcov) \ |
| $(if $(filter true,$(NATIVE_COVERAGE)),$(PRIVATE_HOST_LIBPROFILE_RT)) \ |
| $(PRIVATE_ALL_SHARED_LIBRARIES) \ |
| -Wl,-rpath-link=$($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)OUT_INTERMEDIATE_LIBRARIES) \ |
| $(foreach path,$(PRIVATE_RPATHS), \ |
| -Wl,-rpath,\$$ORIGIN/$(path)) \ |
| $(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \ |
| $(PRIVATE_HOST_GLOBAL_LDFLAGS) \ |
| ) \ |
| $(PRIVATE_LDFLAGS) \ |
| -o $@ \ |
| $(PRIVATE_LDLIBS) |
| endef |
| endif |
| |
| define transform-host-o-to-executable |
| @echo "$($(PRIVATE_PREFIX)DISPLAY) Executable: $(PRIVATE_MODULE) ($@)" |
| @mkdir -p $(dir $@) |
| $(transform-host-o-to-executable-inner) |
| endef |
| |
| |
| ########################################################### |
| ## Commands for running javac to make .class files |
| ########################################################### |
| |
| # b/37750224 |
| AAPT_ASAN_OPTIONS := ASAN_OPTIONS=detect_leaks=0 |
| |
| # TODO: Right now we generate the asset resources twice, first as part |
| # of generating the Java classes, then at the end when packaging the final |
| # assets. This should be changed to do one of two things: (1) Don't generate |
| # any resource files the first time, only create classes during that stage; |
| # or (2) Don't use the -c flag with the second stage, instead taking the |
| # resource files from the first stage as additional input. My original intent |
| # was to use approach (2), but this requires a little more work in the tool. |
| # Maybe we should just use approach (1). |
| |
| # This rule creates the R.java and Manifest.java files, both of which |
| # are PRODUCT-neutral. Don't pass PRIVATE_PRODUCT_AAPT_CONFIG to this invocation. |
| define create-resource-java-files |
| @mkdir -p $(dir $(PRIVATE_RESOURCE_PUBLICS_OUTPUT)) |
| rm -rf $(PRIVATE_JAVA_GEN_DIR) |
| mkdir -p $(PRIVATE_JAVA_GEN_DIR) |
| $(hide) $(AAPT_ASAN_OPTIONS) $(AAPT) package $(PRIVATE_AAPT_FLAGS) -m \ |
| $(eval # PRIVATE_PRODUCT_AAPT_CONFIG is intentionally missing-- see comment.) \ |
| $(addprefix -J , $(PRIVATE_JAVA_GEN_DIR)) \ |
| $(addprefix -M , $(PRIVATE_ANDROID_MANIFEST)) \ |
| $(addprefix -P , $(PRIVATE_RESOURCE_PUBLICS_OUTPUT)) \ |
| $(addprefix -S , $(PRIVATE_RESOURCE_DIR)) \ |
| $(addprefix -A , $(PRIVATE_ASSET_DIR)) \ |
| $(addprefix -I , $(PRIVATE_AAPT_INCLUDES)) \ |
| $(addprefix -G , $(PRIVATE_PROGUARD_OPTIONS_FILE)) \ |
| $(addprefix --min-sdk-version , $(PRIVATE_DEFAULT_APP_TARGET_SDK)) \ |
| $(addprefix --target-sdk-version , $(PRIVATE_DEFAULT_APP_TARGET_SDK)) \ |
| $(if $(filter --version-code,$(PRIVATE_AAPT_FLAGS)),,--version-code $(PLATFORM_SDK_VERSION)) \ |
| $(if $(filter --version-name,$(PRIVATE_AAPT_FLAGS)),,--version-name $(APPS_DEFAULT_VERSION_NAME)) \ |
| $(addprefix --rename-manifest-package , $(PRIVATE_MANIFEST_PACKAGE_NAME)) \ |
| $(addprefix --rename-instrumentation-target-package , $(PRIVATE_MANIFEST_INSTRUMENTATION_FOR)) \ |
| --skip-symbols-without-default-localization |
| $(SOONG_ZIP) -o $(PRIVATE_SRCJAR) -C $(PRIVATE_JAVA_GEN_DIR) -D $(PRIVATE_JAVA_GEN_DIR) |
| # So that we re-run aapt when the list of input files change |
| $(hide) echo $(PRIVATE_RESOURCE_LIST) >/dev/null |
| endef |
| |
| # Search for generated R.java/Manifest.java in $1, copy the found R.java as $2. |
| # Also copy them to a central 'R' directory to make it easier to add the files to an IDE. |
| define find-generated-R.java |
| $(hide) for GENERATED_MANIFEST_FILE in `find $(1) \ |
| -name Manifest.java 2> /dev/null`; do \ |
| dir=`awk '/package/{gsub(/\./,"/",$$2);gsub(/;/,"",$$2);print $$2;exit}' $$GENERATED_MANIFEST_FILE`; \ |
| mkdir -p $(TARGET_COMMON_OUT_ROOT)/R/$$dir; \ |
| $(ACP) -fp $$GENERATED_MANIFEST_FILE $(TARGET_COMMON_OUT_ROOT)/R/$$dir; \ |
| done; |
| $(hide) for GENERATED_R_FILE in `find $(1) \ |
| -name R.java 2> /dev/null`; do \ |
| dir=`awk '/package/{gsub(/\./,"/",$$2);gsub(/;/,"",$$2);print $$2;exit}' $$GENERATED_R_FILE`; \ |
| mkdir -p $(TARGET_COMMON_OUT_ROOT)/R/$$dir; \ |
| $(ACP) -fp $$GENERATED_R_FILE $(TARGET_COMMON_OUT_ROOT)/R/$$dir \ |
| || exit 31; \ |
| $(ACP) -fp $$GENERATED_R_FILE $(2) || exit 32; \ |
| done; |
| @# Ensure that the target file is always created, i.e. also in case we did not |
| @# enter the GENERATED_R_FILE-loop above. This avoids unnecessary rebuilding. |
| $(hide) touch $(2) |
| endef |
| |
| ########################################################### |
| # AAPT2 compilation and link |
| ########################################################### |
| define aapt2-compile-one-resource-file |
| @mkdir -p $(dir $@) |
| $(hide) $(AAPT2) compile -o $(dir $@) $(PRIVATE_AAPT2_CFLAGS) --legacy $< |
| endef |
| |
| define aapt2-compile-resource-dirs |
| @mkdir -p $(dir $@) |
| $(hide) $(AAPT2) compile -o $@ $(addprefix --dir ,$(PRIVATE_SOURCE_RES_DIRS)) \ |
| $(PRIVATE_AAPT2_CFLAGS) --legacy |
| endef |
| |
| # TODO(b/74574557): use aapt2 compile --zip if it gets implemented |
| define aapt2-compile-resource-zips |
| @mkdir -p $(dir $@) |
| $(ZIPSYNC) -d $@.contents -l $@.list $(PRIVATE_SOURCE_RES_ZIPS) |
| $(hide) $(AAPT2) compile -o $@ --dir $@.contents $(PRIVATE_AAPT2_CFLAGS) --legacy |
| endef |
| |
| # Set up rule to compile one resource file with aapt2. |
| # Must be called with $(eval). |
| # $(1): the source file |
| # $(2): the output file |
| define aapt2-compile-one-resource-file-rule |
| $(2) : $(1) $(AAPT2) |
| @echo "AAPT2 compile $$@ <- $$<" |
| $$(call aapt2-compile-one-resource-file) |
| endef |
| |
| # Convert input resource file path to output file path. |
| # values-[config]/<file>.xml -> values-[config]_<file>.arsc.flat; |
| # For other resource file, just replace the last "/" with "_" and |
| # add .flat extension. |
| # |
| # $(1): the input resource file path |
| # $(2): the base dir of the output file path |
| # Returns: the compiled output file path |
| define aapt2-compiled-resource-out-file |
| $(strip \ |
| $(eval _p_w := $(strip $(subst /,$(space),$(dir $(call clean-path,$(1)))))) |
| $(2)/$(subst $(space),/,$(_p_w))_$(if $(filter values%,$(lastword $(_p_w))),$(patsubst %.xml,%.arsc,$(notdir $(1))),$(notdir $(1))).flat) |
| endef |
| |
| define aapt2-link |
| @mkdir -p $(dir $@) |
| rm -rf $(PRIVATE_JAVA_GEN_DIR) |
| mkdir -p $(PRIVATE_JAVA_GEN_DIR) |
| $(call dump-words-to-file,$(PRIVATE_RES_FLAT),$(dir $@)aapt2-flat-list) |
| $(call dump-words-to-file,$(PRIVATE_OVERLAY_FLAT),$(dir $@)aapt2-flat-overlay-list) |
| $(hide) $(AAPT2) link -o $@ \ |
| $(PRIVATE_AAPT_FLAGS) \ |
| $(if $(PRIVATE_STATIC_LIBRARY_EXTRA_PACKAGES),$$(cat $(PRIVATE_STATIC_LIBRARY_EXTRA_PACKAGES))) \ |
| $(addprefix --manifest ,$(PRIVATE_ANDROID_MANIFEST)) \ |
| $(addprefix -I ,$(PRIVATE_AAPT_INCLUDES)) \ |
| $(addprefix -I ,$(PRIVATE_SHARED_ANDROID_LIBRARIES)) \ |
| $(addprefix -A ,$(PRIVATE_ASSET_DIR)) \ |
| $(addprefix --java ,$(PRIVATE_JAVA_GEN_DIR)) \ |
| $(addprefix --proguard ,$(PRIVATE_PROGUARD_OPTIONS_FILE)) \ |
| $(addprefix --min-sdk-version ,$(PRIVATE_DEFAULT_APP_TARGET_SDK)) \ |
| $(addprefix --target-sdk-version ,$(PRIVATE_DEFAULT_APP_TARGET_SDK)) \ |
| $(if $(filter --product,$(PRIVATE_AAPT_FLAGS)),,$(addprefix --product ,$(PRIVATE_TARGET_AAPT_CHARACTERISTICS))) \ |
| $(addprefix -c ,$(PRIVATE_PRODUCT_AAPT_CONFIG)) \ |
| $(addprefix --preferred-density ,$(PRIVATE_PRODUCT_AAPT_PREF_CONFIG)) \ |
| $(if $(filter --version-code,$(PRIVATE_AAPT_FLAGS)),,--version-code $(PLATFORM_SDK_VERSION)) \ |
| $(if $(filter --version-name,$(PRIVATE_AAPT_FLAGS)),,--version-name $(APPS_DEFAULT_VERSION_NAME)) \ |
| $(addprefix --rename-manifest-package ,$(PRIVATE_MANIFEST_PACKAGE_NAME)) \ |
| $(addprefix --rename-instrumentation-target-package ,$(PRIVATE_MANIFEST_INSTRUMENTATION_FOR)) \ |
| -R \@$(dir $@)aapt2-flat-overlay-list \ |
| \@$(dir $@)aapt2-flat-list |
| $(SOONG_ZIP) -o $(PRIVATE_SRCJAR) -C $(PRIVATE_JAVA_GEN_DIR) -D $(PRIVATE_JAVA_GEN_DIR) |
| $(EXTRACT_JAR_PACKAGES) -i $(PRIVATE_SRCJAR) -o $(PRIVATE_AAPT_EXTRA_PACKAGES) --prefix '--extra-packages ' |
| endef |
| |
| define _create-default-manifest-file |
| $(1): |
| rm -f $1 |
| (echo '<manifest xmlns:android="http://schemas.android.com/apk/res/android" package="missing.manifest">' && \ |
| echo ' <uses-sdk android:minSdkVersion="$(2)" />' && \ |
| echo '</manifest>' ) > $1 |
| endef |
| |
| define create-default-manifest-file |
| $(eval $(call _create-default-manifest-file,$(1),$(2))) |
| endef |
| |
| |
| ########################################################### |
| xlint_unchecked := -Xlint:unchecked |
| |
| # emit-line, <word list>, <output file> |
| define emit-line |
| $(if $(1),echo -n '$(strip $(1)) ' >> $(2)) |
| endef |
| |
| # dump-words-to-file, <word list>, <output file> |
| define dump-words-to-file |
| @rm -f $(2) |
| @touch $(2) |
| @$(call emit-line,$(wordlist 1,500,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 501,1000,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 1001,1500,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 1501,2000,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 2001,2500,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 2501,3000,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 3001,3500,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 3501,4000,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 4001,4500,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 4501,5000,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 5001,5500,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 5501,6000,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 6001,6500,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 6501,7000,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 7001,7500,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 7501,8000,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 8001,8500,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 8501,9000,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 9001,9500,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 9501,10000,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 10001,10500,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 10501,11000,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 11001,11500,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 11501,12000,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 12001,12500,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 12501,13000,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 13001,13500,$(1)),$(2)) |
| @$(if $(wordlist 13501,13502,$(1)),$(error Too many words ($(words $(1))))) |
| endef |
| |
| # For a list of jar files, unzip them to a specified directory, |
| # but make sure that no META-INF files come along for the ride, |
| # unless PRIVATE_DONT_DELETE_JAR_META_INF is set. |
| # |
| # $(1): files to unzip |
| # $(2): destination directory |
| define unzip-jar-files |
| $(hide) for f in $(1); \ |
| do \ |
| if [ ! -f $$f ]; then \ |
| echo Missing file $$f; \ |
| exit 1; \ |
| fi; \ |
| unzip -qo $$f -d $(2); \ |
| rm -f $(2)/module-info.class; \ |
| done |
| $(if $(PRIVATE_DONT_DELETE_JAR_META_INF),,$(hide) rm -rf $(2)/META-INF) |
| endef |
| |
| # Return jar arguments to compress files in a given directory |
| # $(1): directory |
| # |
| # Returns an @-file argument that contains the output of a subshell |
| # that looks like -C $(1) path/to/file1 -C $(1) path/to/file2 |
| # Also adds "-C out/empty ." which avoids errors in jar when |
| # there are no files in the directory. |
| define jar-args-sorted-files-in-directory |
| @<(find $(1) -type f | sort | $(JAR_ARGS) $(1); echo "-C $(EMPTY_DIRECTORY) .") |
| endef |
| |
| # append additional Java sources(resources/Proto sources, and etc) to $(1). |
| define fetch-additional-java-source |
| $(hide) if [ -d "$(PRIVATE_SOURCE_INTERMEDIATES_DIR)" ]; then \ |
| find $(PRIVATE_SOURCE_INTERMEDIATES_DIR) -name '*.java' -and -not -name '.*' >> $(1); \ |
| fi |
| $(if $(PRIVATE_HAS_PROTO_SOURCES), \ |
| $(hide) find $(PRIVATE_PROTO_SOURCE_INTERMEDIATES_DIR) -name '*.java' -and -not -name '.*' >> $(1)) |
| endef |
| |
| # Some historical notes: |
| # - below we write the list of java files to java-source-list to avoid argument |
| # list length problems with Cygwin |
| # - we filter out duplicate java file names because eclipse's compiler |
| # doesn't like them. |
| define write-java-source-list |
| @echo "$($(PRIVATE_PREFIX)DISPLAY) Java source list: $(PRIVATE_MODULE)" |
| $(hide) rm -f $@ |
| $(call dump-words-to-file,$(sort $(PRIVATE_JAVA_SOURCES)),$@.tmp) |
| $(call fetch-additional-java-source,$@.tmp) |
| $(hide) tr ' ' '\n' < $@.tmp | $(NORMALIZE_PATH) | sort -u > $@ |
| endef |
| |
| # Common definition to invoke javac on the host and target. |
| # |
| # $(1): javac |
| # $(2): classpath_libs |
| define compile-java |
| $(hide) rm -f $@ |
| $(hide) rm -rf $(PRIVATE_CLASS_INTERMEDIATES_DIR) $(PRIVATE_ANNO_INTERMEDIATES_DIR) |
| $(hide) mkdir -p $(dir $@) |
| $(hide) mkdir -p $(PRIVATE_CLASS_INTERMEDIATES_DIR) $(PRIVATE_ANNO_INTERMEDIATES_DIR) |
| $(if $(PRIVATE_SRCJARS),\ |
| $(ZIPSYNC) -d $(PRIVATE_SRCJAR_INTERMEDIATES_DIR) -l $(PRIVATE_SRCJAR_LIST_FILE) -f "*.java" $(PRIVATE_SRCJARS)) |
| $(hide) if [ -s $(PRIVATE_JAVA_SOURCE_LIST) $(if $(PRIVATE_SRCJARS),-o -s $(PRIVATE_SRCJAR_LIST_FILE) )] ; then \ |
| $(SOONG_JAVAC_WRAPPER) $(JAVAC_WRAPPER) $(1) -encoding UTF-8 \ |
| $(if $(findstring true,$(PRIVATE_WARNINGS_ENABLE)),$(xlint_unchecked),) \ |
| $(if $(PRIVATE_USE_SYSTEM_MODULES), \ |
| $(addprefix --system=,$(PRIVATE_SYSTEM_MODULES_DIR)), \ |
| $(addprefix -bootclasspath ,$(strip \ |
| $(call normalize-path-list,$(PRIVATE_BOOTCLASSPATH)) \ |
| $(PRIVATE_EMPTY_BOOTCLASSPATH)))) \ |
| $(if $(PRIVATE_USE_SYSTEM_MODULES), \ |
| $(if $(PRIVATE_PATCH_MODULE), \ |
| --patch-module=$(PRIVATE_PATCH_MODULE)=$(call normalize-path-list,. $(2)))) \ |
| $(addprefix -classpath ,$(call normalize-path-list,$(strip \ |
| $(if $(PRIVATE_USE_SYSTEM_MODULES), \ |
| $(filter-out $(PRIVATE_SYSTEM_MODULES_LIBS),$(PRIVATE_BOOTCLASSPATH))) \ |
| $(2)))) \ |
| $(if $(findstring true,$(PRIVATE_WARNINGS_ENABLE)),$(xlint_unchecked),) \ |
| -d $(PRIVATE_CLASS_INTERMEDIATES_DIR) -s $(PRIVATE_ANNO_INTERMEDIATES_DIR) \ |
| $(PRIVATE_JAVACFLAGS) \ |
| \@$(PRIVATE_JAVA_SOURCE_LIST) \ |
| $(if $(PRIVATE_SRCJARS),\@$(PRIVATE_SRCJAR_LIST_FILE)) \ |
| || ( rm -rf $(PRIVATE_CLASS_INTERMEDIATES_DIR) ; exit 41 ) \ |
| fi |
| $(if $(PRIVATE_JAVA_LAYERS_FILE), $(hide) build/make/tools/java-layers.py \ |
| $(PRIVATE_JAVA_LAYERS_FILE) @$(PRIVATE_JAVA_SOURCE_LIST),) |
| $(if $(PRIVATE_JAR_EXCLUDE_FILES), $(hide) find $(PRIVATE_CLASS_INTERMEDIATES_DIR) \ |
| -name $(word 1, $(PRIVATE_JAR_EXCLUDE_FILES)) \ |
| $(addprefix -o -name , $(wordlist 2, 999, $(PRIVATE_JAR_EXCLUDE_FILES))) \ |
| | xargs rm -rf) |
| $(if $(PRIVATE_JAR_PACKAGES), \ |
| $(hide) find $(PRIVATE_CLASS_INTERMEDIATES_DIR) -mindepth 1 -type f \ |
| $(foreach pkg, $(PRIVATE_JAR_PACKAGES), \ |
| -not -path $(PRIVATE_CLASS_INTERMEDIATES_DIR)/$(subst .,/,$(pkg))/\*) -delete ; \ |
| find $(PRIVATE_CLASS_INTERMEDIATES_DIR) -empty -delete) |
| $(if $(PRIVATE_JAR_EXCLUDE_PACKAGES), $(hide) rm -rf \ |
| $(foreach pkg, $(PRIVATE_JAR_EXCLUDE_PACKAGES), \ |
| $(PRIVATE_CLASS_INTERMEDIATES_DIR)/$(subst .,/,$(pkg)))) |
| $(hide) $(JAR) -cf $@ $(call jar-args-sorted-files-in-directory,$(PRIVATE_CLASS_INTERMEDIATES_DIR)) |
| $(if $(PRIVATE_EXTRA_JAR_ARGS),$(call add-java-resources-to,$@)) |
| endef |
| |
| define transform-java-to-header.jar |
| @echo "$($(PRIVATE_PREFIX)DISPLAY) Turbine: $(PRIVATE_MODULE)" |
| @mkdir -p $(dir $@) |
| @rm -rf $(dir $@)/classes-turbine |
| @mkdir $(dir $@)/classes-turbine |
| $(hide) if [ -s $(PRIVATE_JAVA_SOURCE_LIST) -o -n "$(PRIVATE_SRCJARS)" ] ; then \ |
| $(JAVA) -jar $(TURBINE) \ |
| --output $@.premerged --temp_dir $(dir $@)/classes-turbine \ |
| --sources \@$(PRIVATE_JAVA_SOURCE_LIST) --source_jars $(PRIVATE_SRCJARS) \ |
| --javacopts $(PRIVATE_JAVACFLAGS) $(COMMON_JDK_FLAGS) -- \ |
| $(addprefix --bootclasspath ,$(strip $(PRIVATE_BOOTCLASSPATH))) \ |
| $(addprefix --classpath ,$(strip $(PRIVATE_ALL_JAVA_HEADER_LIBRARIES))) \ |
| || ( rm -rf $(dir $@)/classes-turbine ; exit 41 ) && \ |
| $(MERGE_ZIPS) -j --ignore-duplicates -stripDir META-INF $@.tmp $@.premerged $(call reverse-list,$(PRIVATE_STATIC_JAVA_HEADER_LIBRARIES)) ; \ |
| else \ |
| $(MERGE_ZIPS) -j --ignore-duplicates -stripDir META-INF $@.tmp $(call reverse-list,$(PRIVATE_STATIC_JAVA_HEADER_LIBRARIES)) ; \ |
| fi |
| $(hide) $(ZIPTIME) $@.tmp |
| $(hide) $(call commit-change-for-toc,$@) |
| endef |
| |
| # Moves $1.tmp to $1 if necessary. This is designed to be used with |
| # .KATI_RESTAT. For kati, this function doesn't update the timestamp |
| # of $1 when $1.tmp is identical to $1 so that ninja won't rebuild |
| # targets which depend on $1. |
| define commit-change-for-toc |
| $(hide) if cmp -s $1.tmp $1 ; then \ |
| rm $1.tmp ; \ |
| else \ |
| mv $1.tmp $1 ; \ |
| fi |
| endef |
| |
| ifeq (,$(TARGET_BUILD_APPS)) |
| |
| ## Rule to create a table of contents from a .dex file. |
| ## Must be called with $(eval). |
| # $(1): The directory which contains classes*.dex files |
| define _transform-dex-to-toc |
| $1/classes.dex.toc: PRIVATE_INPUT_DEX_FILES := $1/classes*.dex |
| $1/classes.dex.toc: $1/classes.dex $(DEXDUMP) |
| @echo Generating TOC: $$@ |
| $(hide) ANDROID_LOG_TAGS="*:e" $(DEXDUMP) -l xml $$(PRIVATE_INPUT_DEX_FILES) > $$@.tmp |
| $$(call commit-change-for-toc,$$@) |
| endef |
| |
| ## Define a rule which generates .dex.toc and mark it as .KATI_RESTAT. |
| # $(1): The directory which contains classes*.dex files |
| define define-dex-to-toc-rule |
| $(eval $(call _transform-dex-to-toc,$1))\ |
| $(eval .KATI_RESTAT: $1/classes.dex.toc) |
| endef |
| |
| else |
| |
| # Turn off .toc optimization for apps build as we cannot build dexdump. |
| define define-dex-to-toc-rule |
| endef |
| |
| endif # TARGET_BUILD_APPS |
| |
| |
| # Takes an sdk version that might be PLATFORM_VERSION_CODENAME (for example P), |
| # returns a number greater than the highest existing sdk version if it is, or |
| # the input if it is not. |
| define codename-or-sdk-to-sdk |
| $(if $(filter $(1),$(PLATFORM_VERSION_CODENAME)),10000,$(1)) |
| endef |
| |
| |
| define transform-classes.jar-to-dex |
| @echo "target Dex: $(PRIVATE_MODULE)" |
| @mkdir -p $(dir $@) |
| $(hide) rm -f $(dir $@)classes*.dex $(dir $@)d8_input.jar |
| $(hide) $(ZIP2ZIP) -j -i $< -o $(dir $@)d8_input.jar "**/*.class" |
| $(hide) $(DX_COMMAND) \ |
| --output $(dir $@) \ |
| --min-api $(PRIVATE_MIN_SDK_VERSION) \ |
| $(subst --main-dex-list=, --main-dex-list , \ |
| $(filter-out --core-library --multi-dex --minimal-main-dex,$(PRIVATE_DX_FLAGS))) \ |
| $(dir $@)d8_input.jar |
| $(hide) rm -f $(dir $@)d8_input.jar |
| endef |
| |
| # Create a mostly-empty .jar file that we'll add to later. |
| # The MacOS jar tool doesn't like creating empty jar files, |
| # so we need to give it something. |
| # $(1) package to create |
| define create-empty-package-at |
| @mkdir -p $(dir $(1)) |
| $(hide) touch $(dir $(1))zipdummy |
| $(hide) $(JAR) cf $(1) -C $(dir $(1)) zipdummy |
| $(hide) zip -qd $(1) zipdummy |
| $(hide) rm $(dir $(1))zipdummy |
| endef |
| |
| # Create a mostly-empty .jar file that we'll add to later. |
| # The MacOS jar tool doesn't like creating empty jar files, |
| # so we need to give it something. |
| define create-empty-package |
| $(call create-empty-package-at,$@) |
| endef |
| |
| # Copy an arhchive file and delete any class files and empty folders inside. |
| # $(1): the source archive file. |
| # $(2): the destination archive file. |
| define initialize-package-file |
| @mkdir -p $(dir $(2)) |
| $(hide) cp -f $(1) $(2) |
| $(hide) zip -qd $(2) "*.class" \ |
| $(if $(strip $(PRIVATE_DONT_DELETE_JAR_DIRS)),,"*/") \ |
| || true # Ignore the error when nothing to delete. |
| endef |
| |
| #TODO: we kinda want to build different asset packages for |
| # different configurations, then combine them later (or something). |
| # Per-locale, etc. |
| # A list of dynamic and static parameters; build layers for |
| # dynamic params that lay over the static ones. |
| #TODO: update the manifest to point to the package file |
| #Note that the version numbers are given to aapt as simple default |
| #values; applications can override these by explicitly stating |
| #them in their manifest. |
| define add-assets-to-package |
| $(hide) $(AAPT_ASAN_OPTIONS) $(AAPT) package -u $(PRIVATE_AAPT_FLAGS) \ |
| $(addprefix -c , $(PRIVATE_PRODUCT_AAPT_CONFIG)) \ |
| $(addprefix --preferred-density , $(PRIVATE_PRODUCT_AAPT_PREF_CONFIG)) \ |
| $(addprefix -M , $(PRIVATE_ANDROID_MANIFEST)) \ |
| $(addprefix -S , $(PRIVATE_RESOURCE_DIR)) \ |
| $(addprefix -A , $(PRIVATE_ASSET_DIR)) \ |
| $(addprefix -I , $(PRIVATE_AAPT_INCLUDES)) \ |
| $(addprefix --min-sdk-version , $(PRIVATE_DEFAULT_APP_TARGET_SDK)) \ |
| $(addprefix --target-sdk-version , $(PRIVATE_DEFAULT_APP_TARGET_SDK)) \ |
| $(if $(filter --product,$(PRIVATE_AAPT_FLAGS)),,$(addprefix --product , $(PRIVATE_TARGET_AAPT_CHARACTERISTICS))) \ |
| $(if $(filter --version-code,$(PRIVATE_AAPT_FLAGS)),,--version-code $(PLATFORM_SDK_VERSION)) \ |
| $(if $(filter --version-name,$(PRIVATE_AAPT_FLAGS)),,--version-name $(APPS_DEFAULT_VERSION_NAME)) \ |
| $(addprefix --rename-manifest-package , $(PRIVATE_MANIFEST_PACKAGE_NAME)) \ |
| $(addprefix --rename-instrumentation-target-package , $(PRIVATE_MANIFEST_INSTRUMENTATION_FOR)) \ |
| --skip-symbols-without-default-localization \ |
| -F $@ |
| # So that we re-run aapt when the list of input files change |
| $(hide) echo $(PRIVATE_RESOURCE_LIST) >/dev/null |
| endef |
| |
| # We need the extra blank line, so that the command will be on a separate line. |
| # $(1): the ABI name |
| # $(2): the list of shared libraies |
| define _add-jni-shared-libs-to-package-per-abi |
| $(hide) cp $(2) $(dir $@)lib/$(1) |
| |
| endef |
| |
| # For apps_only build, don't uncompress/page-align the jni libraries, |
| # because the apk may be run on older platforms that don't support loading jni directly from apk. |
| ifdef TARGET_BUILD_APPS |
| JNI_COMPRESS_FLAGS := |
| ZIPALIGN_PAGE_ALIGN_FLAGS := |
| else |
| JNI_COMPRESS_FLAGS := -0 |
| ZIPALIGN_PAGE_ALIGN_FLAGS := -p |
| endif |
| |
| define add-jni-shared-libs-to-package |
| $(hide) rm -rf $(dir $@)lib |
| $(hide) mkdir -p $(addprefix $(dir $@)lib/,$(PRIVATE_JNI_SHARED_LIBRARIES_ABI)) |
| $(foreach abi,$(PRIVATE_JNI_SHARED_LIBRARIES_ABI),\ |
| $(call _add-jni-shared-libs-to-package-per-abi,$(abi),\ |
| $(patsubst $(abi):%,%,$(filter $(abi):%,$(PRIVATE_JNI_SHARED_LIBRARIES))))) |
| $(hide) (cd $(dir $@) && zip -qrX $(JNI_COMPRESS_FLAGS) $(notdir $@) lib) |
| $(hide) rm -rf $(dir $@)lib |
| endef |
| |
| #TODO: update the manifest to point to the dex file |
| define add-dex-to-package |
| $(call add-dex-to-package-arg,$@) |
| endef |
| |
| # $(1): the package file. |
| define add-dex-to-package-arg |
| $(hide) find $(dir $(PRIVATE_DEX_FILE)) -maxdepth 1 -name "classes*.dex" | sort | xargs zip -qjX $(1) |
| endef |
| |
| # Add java resources added by the current module. |
| # $(1) destination package |
| # |
| define add-java-resources-to |
| $(call dump-words-to-file, $(PRIVATE_EXTRA_JAR_ARGS), $(1).jar-arg-list) |
| $(hide) $(JAR) uf $(1) @$(1).jar-arg-list |
| @rm -f $(1).jar-arg-list |
| endef |
| |
| # Add resources (non .class files) from a jar to a package |
| # $(1): the package file |
| # $(2): the jar file |
| # $(3): temporary directory |
| define add-jar-resources-to-package |
| rm -rf $(3) |
| mkdir -p $(3) |
| unzip -qo $(2) -d $(3) $$(zipinfo -1 $(2) | grep -v -E "\.class$$") |
| $(JAR) uf $(1) $(call jar-args-sorted-files-in-directory,$(3)) |
| endef |
| |
| # Sign a package using the specified key/cert. |
| # |
| define sign-package |
| $(call sign-package-arg,$@) |
| endef |
| |
| # $(1): the package file we are signing. |
| define sign-package-arg |
| $(hide) mv $(1) $(1).unsigned |
| $(hide) $(JAVA) -Djava.library.path=$(SIGNAPK_JNI_LIBRARY_PATH) -jar $(SIGNAPK_JAR) \ |
| $(PRIVATE_CERTIFICATE) $(PRIVATE_PRIVATE_KEY) \ |
| $(PRIVATE_ADDITIONAL_CERTIFICATES) $(1).unsigned $(1).signed |
| $(hide) mv $(1).signed $(1) |
| endef |
| |
| # Align STORED entries of a package on 4-byte boundaries to make them easier to mmap. |
| # |
| define align-package |
| $(hide) if ! $(ZIPALIGN) -c $(ZIPALIGN_PAGE_ALIGN_FLAGS) 4 $@ >/dev/null ; then \ |
| mv $@ $@.unaligned; \ |
| $(ZIPALIGN) \ |
| -f \ |
| $(ZIPALIGN_PAGE_ALIGN_FLAGS) \ |
| 4 \ |
| $@.unaligned $@.aligned; \ |
| mv $@.aligned $@; \ |
| fi |
| endef |
| |
| # Compress a package using the standard gzip algorithm. |
| define compress-package |
| $(hide) \ |
| mv $@ $@.uncompressed; \ |
| $(MINIGZIP) -c $@.uncompressed > $@.compressed; \ |
| rm -f $@.uncompressed; \ |
| mv $@.compressed $@; |
| endef |
| |
| ifeq ($(HOST_OS),linux) |
| # Runs appcompat and store logs in $(PRODUCT_OUT)/appcompat |
| define extract-package |
| $(if $(filter aapt2, $(1)), \ |
| $(AAPT2) dump $@ | awk -F ' |=' '/^Package/{print $$3}' >> $(PRODUCT_OUT)/appcompat/$(PRIVATE_MODULE).log &&, \ |
| $(AAPT) dump badging $@ | awk -F \' '/^package/{print $$2}' >> $(PRODUCT_OUT)/appcompat/$(PRIVATE_MODULE).log &&) |
| endef |
| define appcompat-header |
| $(hide) \ |
| mkdir -p $(PRODUCT_OUT)/appcompat && \ |
| rm -f $(PRODUCT_OUT)/appcompat/$(PRIVATE_MODULE).log && \ |
| echo -n "Package name: " >> $(PRODUCT_OUT)/appcompat/$(PRIVATE_MODULE).log && \ |
| $(call extract-package, $(1)) \ |
| echo "Module name in Android tree: $(PRIVATE_MODULE)" >> $(PRODUCT_OUT)/appcompat/$(PRIVATE_MODULE).log && \ |
| echo "Local path in Android tree: $(PRIVATE_PATH)" >> $(PRODUCT_OUT)/appcompat/$(PRIVATE_MODULE).log && \ |
| echo "Install path on $(TARGET_PRODUCT)-$(TARGET_BUILD_VARIANT): $(PRIVATE_INSTALLED_MODULE)" >> $(PRODUCT_OUT)/appcompat/$(PRIVATE_MODULE).log && \ |
| echo >> $(PRODUCT_OUT)/appcompat/$(PRIVATE_MODULE).log |
| endef |
| define run-appcompat |
| $(hide) \ |
| echo "appcompat.sh output:" >> $(PRODUCT_OUT)/appcompat/$(PRIVATE_MODULE).log && \ |
| art/tools/veridex/appcompat.sh --dex-file=$@ 2>&1 >> $(PRODUCT_OUT)/appcompat/$(PRIVATE_MODULE).log |
| endef |
| else |
| appcompat-header = |
| run-appcompat = |
| endif # HOST_OS == linux |
| |
| # Remove dynamic timestamps from packages |
| # |
| define remove-timestamps-from-package |
| $(hide) $(ZIPTIME) $@ |
| endef |
| |
| # Uncompress dex files embedded in an apk. |
| # |
| define uncompress-dexs |
| $(hide) if (zipinfo $@ '*.dex' 2>/dev/null | grep -v ' stor ' >/dev/null) ; then \ |
| tmpdir=$@.tmpdir; \ |
| rm -rf $$tmpdir && mkdir $$tmpdir; \ |
| unzip -q $@ '*.dex' -d $$tmpdir && \ |
| zip -qd $@ '*.dex' && \ |
| ( cd $$tmpdir && find . -type f | sort | zip -qD -X -0 ../$(notdir $@) -@ ) && \ |
| rm -rf $$tmpdir; \ |
| fi |
| endef |
| |
| # Uncompress shared libraries embedded in an apk. |
| # |
| define uncompress-shared-libs |
| $(hide) if (zipinfo $@ $(PRIVATE_EMBEDDED_JNI_LIBS) 2>/dev/null | grep -v ' stor ' >/dev/null) ; then \ |
| rm -rf $(dir $@)uncompressedlibs && mkdir $(dir $@)uncompressedlibs; \ |
| unzip -q $@ $(PRIVATE_EMBEDDED_JNI_LIBS) -d $(dir $@)uncompressedlibs && \ |
| zip -qd $@ 'lib/*.so' && \ |
| ( cd $(dir $@)uncompressedlibs && find lib -type f | sort | zip -qD -X -0 ../$(notdir $@) -@ ) && \ |
| rm -rf $(dir $@)uncompressedlibs; \ |
| fi |
| endef |
| |
| # TODO(joeo): If we can ever upgrade to post 3.81 make and get the |
| # new prebuilt rules to work, we should change this to copy the |
| # resources to the out directory and then copy the resources. |
| |
| # Note: we intentionally don't clean PRIVATE_CLASS_INTERMEDIATES_DIR |
| # in transform-java-to-classes for the sake of vm-tests. |
| define transform-host-java-to-package |
| @echo "Host Java: $(PRIVATE_MODULE) ($(PRIVATE_CLASS_INTERMEDIATES_DIR))" |
| $(call compile-java,$(HOST_JAVAC),$(PRIVATE_ALL_JAVA_LIBRARIES)) |
| endef |
| |
| # Note: we intentionally don't clean PRIVATE_CLASS_INTERMEDIATES_DIR |
| # in transform-java-to-classes for the sake of vm-tests. |
| define transform-host-java-to-dalvik-package |
| @echo "Dalvik Java: $(PRIVATE_MODULE) ($(PRIVATE_CLASS_INTERMEDIATES_DIR))" |
| $(call compile-java,$(HOST_JAVAC),$(PRIVATE_ALL_JAVA_HEADER_LIBRARIES)) |
| endef |
| |
| ########################################################### |
| ## Commands for copying files |
| ########################################################### |
| |
| # Define a rule to copy a header. Used via $(eval) by copy_headers.make. |
| # $(1): source header |
| # $(2): destination header |
| define copy-one-header |
| $(2): $(1) |
| @echo "Header: $$@" |
| $$(copy-file-to-new-target-with-cp) |
| endef |
| |
| # Define a rule to copy a file. For use via $(eval). |
| # $(1): source file |
| # $(2): destination file |
| define copy-one-file |
| $(2): $(1) |
| @echo "Copy: $$@" |
| $$(copy-file-to-target) |
| endef |
| |
| define copy-and-uncompress-dexs |
| $(2): $(1) $(ZIPALIGN) |
| @echo "Uncompress dexs in: $$@" |
| $$(copy-file-to-target) |
| $$(uncompress-dexs) |
| $$(align-package) |
| endef |
| |
| # Copies many files. |
| # $(1): The files to copy. Each entry is a ':' separated src:dst pair |
| # Evaluates to the list of the dst files (ie suitable for a dependency list) |
| define copy-many-files |
| $(foreach f, $(1), $(strip \ |
| $(eval _cmf_tuple := $(subst :, ,$(f))) \ |
| $(eval _cmf_src := $(word 1,$(_cmf_tuple))) \ |
| $(eval _cmf_dest := $(word 2,$(_cmf_tuple))) \ |
| $(eval $(call copy-one-file,$(_cmf_src),$(_cmf_dest))) \ |
| $(_cmf_dest))) |
| endef |
| |
| # Copy the file only if it's a well-formed init script file. For use via $(eval). |
| # $(1): source file |
| # $(2): destination file |
| define copy-init-script-file-checked |
| # Host init verifier doesn't exist on darwin. |
| ifneq ($(HOST_OS),darwin) |
| $(2): $(1) $(HOST_INIT_VERIFIER) $(call intermediates-dir-for,ETC,passwd)/passwd |
| $(hide) $(HOST_INIT_VERIFIER) $$< $(call intermediates-dir-for,ETC,passwd)/passwd |
| else |
| $(2): $(1) |
| endif |
| @echo "Copy init script: $$@" |
| $$(copy-file-to-target) |
| endef |
| |
| # Copies many init script files and check they are well-formed. |
| # $(1): The init script files to copy. Each entry is a ':' separated src:dst pair. |
| # Evaluates to the list of the dst files. (ie suitable for a dependency list.) |
| define copy-many-init-script-files-checked |
| $(foreach f, $(1), $(strip \ |
| $(eval _cmf_tuple := $(subst :, ,$(f))) \ |
| $(eval _cmf_src := $(word 1,$(_cmf_tuple))) \ |
| $(eval _cmf_dest := $(word 2,$(_cmf_tuple))) \ |
| $(eval $(call copy-init-script-file-checked,$(_cmf_src),$(_cmf_dest))) \ |
| $(_cmf_dest))) |
| endef |
| |
| # Copy the file only if it's a well-formed xml file. For use via $(eval). |
| # $(1): source file |
| # $(2): destination file, must end with .xml. |
| define copy-xml-file-checked |
| $(2): $(1) $(XMLLINT) |
| @echo "Copy xml: $$@" |
| $(hide) $(XMLLINT) $$< >/dev/null # Don't print the xml file to stdout. |
| $$(copy-file-to-target) |
| endef |
| |
| # Copies many xml files and check they are well-formed. |
| # $(1): The xml files to copy. Each entry is a ':' separated src:dst pair. |
| # Evaluates to the list of the dst files. (ie suitable for a dependency list.) |
| define copy-many-xml-files-checked |
| $(foreach f, $(1), $(strip \ |
| $(eval _cmf_tuple := $(subst :, ,$(f))) \ |
| $(eval _cmf_src := $(word 1,$(_cmf_tuple))) \ |
| $(eval _cmf_dest := $(word 2,$(_cmf_tuple))) \ |
| $(eval $(call copy-xml-file-checked,$(_cmf_src),$(_cmf_dest))) \ |
| $(_cmf_dest))) |
| endef |
| |
| # Copy the file only if it is a well-formed manifest file. For use viea $(eval) |
| # $(1): source file |
| # $(2): destination file |
| define copy-vintf-manifest-checked |
| $(2): $(1) $(HOST_OUT_EXECUTABLES)/assemble_vintf |
| @echo "Copy xml: $$@" |
| $(hide) $(HOST_OUT_EXECUTABLES)/assemble_vintf -i $$< >/dev/null # Don't print the xml file to stdout. |
| $$(copy-file-to-target) |
| endef |
| |
| # Copies many vintf manifest files checked. |
| # $(1): The files to copy. Each entry is a ':' separated src:dst pair |
| # Evaluates to the list of the dst files (ie suitable for a dependency list) |
| define copy-many-vintf-manifest-files-checked |
| $(foreach f, $(1), $(strip \ |
| $(eval _cmf_tuple := $(subst :, ,$(f))) \ |
| $(eval _cmf_src := $(word 1,$(_cmf_tuple))) \ |
| $(eval _cmf_dest := $(word 2,$(_cmf_tuple))) \ |
| $(eval $(call copy-vintf-manifest-checked,$(_cmf_src),$(_cmf_dest))) \ |
| $(_cmf_dest))) |
| endef |
| |
| # The -t option to acp and the -p option to cp is |
| # required for OSX. OSX has a ridiculous restriction |
| # where it's an error for a .a file's modification time |
| # to disagree with an internal timestamp, and this |
| # macro is used to install .a files (among other things). |
| |
| # Copy a single file from one place to another, |
| # preserving permissions and overwriting any existing |
| # file. |
| # When we used acp, it could not handle high resolution timestamps |
| # on file systems like ext4. Because of that, '-t' option was disabled |
| # and copy-file-to-target was identical to copy-file-to-new-target. |
| # Keep the behavior until we audit and ensure that switching this back |
| # won't break anything. |
| define copy-file-to-target |
| @mkdir -p $(dir $@) |
| $(hide) rm -f $@ |
| $(hide) cp "$<" "$@" |
| endef |
| |
| # The same as copy-file-to-target, but use the local |
| # cp command instead of acp. |
| define copy-file-to-target-with-cp |
| @mkdir -p $(dir $@) |
| $(hide) rm -f $@ |
| $(hide) cp -p "$<" "$@" |
| endef |
| |
| # The same as copy-file-to-target, but strip out "# comment"-style |
| # comments (for config files and such). |
| define copy-file-to-target-strip-comments |
| @mkdir -p $(dir $@) |
| $(hide) rm -f $@ |
| $(hide) sed -e 's/#.*$$//' -e 's/[ \t]*$$//' -e '/^$$/d' < $< > $@ |
| endef |
| |
| # The same as copy-file-to-target, but don't preserve |
| # the old modification time. |
| define copy-file-to-new-target |
| @mkdir -p $(dir $@) |
| $(hide) rm -f $@ |
| $(hide) cp $< $@ |
| endef |
| |
| # The same as copy-file-to-new-target, but use the local |
| # cp command instead of acp. |
| define copy-file-to-new-target-with-cp |
| @mkdir -p $(dir $@) |
| $(hide) rm -f $@ |
| $(hide) cp $< $@ |
| endef |
| |
| # Copy a prebuilt file to a target location. |
| define transform-prebuilt-to-target |
| @echo "$($(PRIVATE_PREFIX)DISPLAY) Prebuilt: $(PRIVATE_MODULE) ($@)" |
| $(copy-file-to-target) |
| endef |
| |
| # Copy a prebuilt file to a target location, stripping "# comment" comments. |
| define transform-prebuilt-to-target-strip-comments |
| @echo "$($(PRIVATE_PREFIX)DISPLAY) Prebuilt: $(PRIVATE_MODULE) ($@)" |
| $(copy-file-to-target-strip-comments) |
| endef |
| |
| # Copy a list of files/directories to target location, with sub dir structure preserved. |
| # For example $(HOST_OUT_EXECUTABLES)/aapt -> $(staging)/bin/aapt . |
| # $(1): the source list of files/directories. |
| # $(2): the path prefix to strip. In the above example it would be $(HOST_OUT). |
| # $(3): the target location. |
| define copy-files-with-structure |
| $(foreach t,$(1),\ |
| $(eval s := $(patsubst $(2)%,%,$(t)))\ |
| $(hide) mkdir -p $(dir $(3)/$(s)); cp -Rf $(t) $(3)/$(s)$(newline)) |
| endef |
| |
| # Define a rule to create a symlink to a file. |
| # $(1): full path to source |
| # $(2): source (may be relative) |
| # $(3): full path to destination |
| define symlink-file |
| $(eval $(_symlink-file)) |
| endef |
| |
| # Order-only dependency because make/ninja will follow the link when checking |
| # the timestamp, so the file must exist |
| define _symlink-file |
| $(3): | $(1) |
| @echo "Symlink: $$@ -> $(2)" |
| @mkdir -p $(dir $$@) |
| @rm -rf $$@ |
| $(hide) ln -sf $(2) $$@ |
| endef |
| |
| # Copy an apk to a target location while removing classes*.dex |
| # $(1): source file |
| # $(2): destination file |
| # $(3): LOCAL_DEX_PREOPT, if nostripping then leave classes*.dex |
| define dexpreopt-copy-jar |
| $(2): $(1) |
| @echo "Copy: $$@" |
| $$(copy-file-to-target) |
| $(if $(filter nostripping,$(3)),,$$(call dexpreopt-remove-classes.dex,$$@)) |
| endef |
| |
| # $(1): the .jar or .apk to remove classes.dex. Note that if all dex files |
| # are uncompressed in the archive, then dexopt will not do a copy of the dex |
| # files and we should not strip. |
| define dexpreopt-remove-classes.dex |
| $(hide) if (zipinfo $1 '*.dex' 2>/dev/null | grep -v ' stor ' >/dev/null) ; then \ |
| zip --quiet --delete $(1) classes.dex; \ |
| dex_index=2; \ |
| while zip --quiet --delete $(1) classes$${dex_index}.dex > /dev/null; do \ |
| let dex_index=dex_index+1; \ |
| done \ |
| fi |
| endef |
| |
| # Copy dex files, invoking $(HIDDENAPI) on them in the process. |
| # Also make the source dex file an input of the hiddenapi singleton rule in dex_preopt.mk. |
| define hiddenapi-copy-dex-files |
| $(2): $(1) $(HIDDENAPI) $(INTERNAL_PLATFORM_HIDDENAPI_LIGHT_GREYLIST) \ |
| $(INTERNAL_PLATFORM_HIDDENAPI_DARK_GREYLIST) $(INTERNAL_PLATFORM_HIDDENAPI_BLACKLIST) |
| @rm -rf $(dir $(2)) |
| @mkdir -p $(dir $(2)) |
| find $(dir $(1)) -maxdepth 1 -name "classes*.dex" | xargs -I{} cp -f {} $(dir $(2))/; \ |
| find $(dir $(2)) -maxdepth 1 -name "classes*.dex" | sort | sed 's/^/--dex=/' \ |
| | xargs $(HIDDENAPI) encode \ |
| --light-greylist=$(INTERNAL_PLATFORM_HIDDENAPI_LIGHT_GREYLIST) \ |
| --dark-greylist=$(INTERNAL_PLATFORM_HIDDENAPI_DARK_GREYLIST) \ |
| --blacklist=$(INTERNAL_PLATFORM_HIDDENAPI_BLACKLIST) |
| |
| $(INTERNAL_PLATFORM_HIDDENAPI_PRIVATE_LIST): $(1) |
| $(INTERNAL_PLATFORM_HIDDENAPI_PRIVATE_LIST): \ |
| PRIVATE_DEX_INPUTS := $$(PRIVATE_DEX_INPUTS) $(1) |
| endef |
| |
| # Generate a greylist.txt from a classes.jar |
| define hiddenapi-generate-greylist-txt |
| ifneq (,$(wildcard frameworks/base)) |
| # Only generate this target if we're in a tree with frameworks/base present. |
| $(3): .KATI_IMPLICIT_OUTPUTS := $(2) $(4) |
| # For now, write P & Q blacklist to single file until runtime support is finished |
| $(3): $(1) $(CLASS2GREYLIST) $(INTERNAL_PLATFORM_HIDDENAPI_PUBLIC_LIST) |
| $(CLASS2GREYLIST) --public-api-list $(INTERNAL_PLATFORM_HIDDENAPI_PUBLIC_LIST) $(1) \ |
| --write-whitelist $(2) \ |
| --write-greylist $(3) \ |
| --write-greylist 26,28:$(4) |
| |
| $(INTERNAL_PLATFORM_HIDDENAPI_WHITELIST): $(2) $(3) $(4) |
| $(INTERNAL_PLATFORM_HIDDENAPI_WHITELIST): \ |
| PRIVATE_WHITELIST_INPUTS := $$(PRIVATE_WHITELIST_INPUTS) $(2) |
| $(INTERNAL_PLATFORM_HIDDENAPI_WHITELIST): \ |
| PRIVATE_GREYLIST_INPUTS := $$(PRIVATE_GREYLIST_INPUTS) $(3) |
| PRIVATE_DARKGREYLIST_INPUTS := $$(PRIVATE_DARKGREYLIST_INPUTS) $(4) |
| endif |
| endef |
| |
| # File names for intermediate dex files of `hiddenapi-copy-soong-jar`. |
| hiddenapi-soong-input-dex = $(dir $(1))/hiddenapi/dex-input/classes.dex |
| hiddenapi-soong-output-dex = $(dir $(1))/hiddenapi/dex-output/classes.dex |
| |
| # Decompress a JAR with dex files, invoke $(HIDDENAPI) on them and compress again. |
| define hiddenapi-copy-soong-jar |
| $(call hiddenapi-soong-input-dex,$(2)): $(1) |
| @rm -rf `dirname $$@` |
| @mkdir -p `dirname $$@` |
| unzip -o -q $(1) 'classes*.dex' -d `dirname $$@` |
| find `dirname $$@` -maxdepth 1 -name 'classes*.dex' | xargs touch |
| |
| $(call hiddenapi-copy-dex-files,\ |
| $(call hiddenapi-soong-input-dex,$(2)),\ |
| $(call hiddenapi-soong-output-dex,$(2))) |
| |
| $(2): OUTPUT_DIR := $(dir $(call hiddenapi-soong-output-dex,$(2))) |
| $(2): OUTPUT_JAR := $(dir $(call hiddenapi-soong-output-dex,$(2)))classes.jar |
| $(2): $(1) $(call hiddenapi-soong-output-dex,$(2)) | $(SOONG_ZIP) $(MERGE_ZIPS) |
| $(SOONG_ZIP) -o $${OUTPUT_JAR} -C $${OUTPUT_DIR} -D $${OUTPUT_DIR} |
| $(MERGE_ZIPS) -D -zipToNotStrip $${OUTPUT_JAR} -stripFile "classes*.dex" $(2) $${OUTPUT_JAR} $(1) |
| endef |
| |
| |
| ########################################################### |
| ## Commands to call R8 |
| ########################################################### |
| define transform-jar-to-dex-r8 |
| @echo R8: $@ |
| $(hide) rm -f $(PRIVATE_PROGUARD_DICTIONARY) |
| $(hide) $(R8_COMPAT_PROGUARD) -injars '$<' \ |
| --min-api $(PRIVATE_MIN_SDK_VERSION) \ |
| --force-proguard-compatibility --output $(subst classes.dex,,$@) \ |
| $(PRIVATE_PROGUARD_FLAGS) \ |
| $(addprefix -injars , $(PRIVATE_EXTRA_INPUT_JAR)) \ |
| $(PRIVATE_DX_FLAGS) |
| $(hide) touch $(PRIVATE_PROGUARD_DICTIONARY) |
| endef |
| |
| ########################################################### |
| ## Stuff source generated from one-off tools |
| ########################################################### |
| |
| define transform-generated-source |
| @echo "$($(PRIVATE_PREFIX)DISPLAY) Generated: $(PRIVATE_MODULE) <= $<" |
| @mkdir -p $(dir $@) |
| $(hide) $(PRIVATE_CUSTOM_TOOL) |
| endef |
| |
| |
| ########################################################### |
| ## Assertions about attributes of the target |
| ########################################################### |
| |
| # $(1): The file to check |
| ifndef get-file-size |
| $(error HOST_OS must define get-file-size) |
| endif |
| |
| # $(1): The file(s) to check (often $@) |
| # $(2): The partition size. |
| define assert-max-image-size |
| $(if $(2), \ |
| size=$$(for i in $(1); do $(call get-file-size,$$i); echo +; done; echo 0); \ |
| total=$$(( $$( echo "$$size" ) )); \ |
| printname=$$(echo -n "$(1)" | tr " " +); \ |
| maxsize=$$(($(2))); \ |
| if [ "$$total" -gt "$$maxsize" ]; then \ |
| echo "error: $$printname too large ($$total > $$maxsize)"; \ |
| false; \ |
| elif [ "$$total" -gt $$((maxsize - 32768)) ]; then \ |
| echo "WARNING: $$printname approaching size limit ($$total now; limit $$maxsize)"; \ |
| fi \ |
| , \ |
| true \ |
| ) |
| endef |
| |
| |
| ########################################################### |
| ## Define device-specific radio files |
| ########################################################### |
| INSTALLED_RADIOIMAGE_TARGET := |
| |
| # Copy a radio image file to the output location, and add it to |
| # INSTALLED_RADIOIMAGE_TARGET. |
| # $(1): filename |
| define add-radio-file |
| $(eval $(call add-radio-file-internal,$(1),$(notdir $(1)))) |
| endef |
| define add-radio-file-internal |
| INSTALLED_RADIOIMAGE_TARGET += $$(PRODUCT_OUT)/$(2) |
| $$(PRODUCT_OUT)/$(2) : $$(LOCAL_PATH)/$(1) |
| $$(transform-prebuilt-to-target) |
| endef |
| |
| # Version of add-radio-file that also arranges for the version of the |
| # file to be checked against the contents of |
| # $(TARGET_BOARD_INFO_FILE). |
| # $(1): filename |
| # $(2): name of version variable in board-info (eg, "version-baseband") |
| define add-radio-file-checked |
| $(eval $(call add-radio-file-checked-internal,$(1),$(notdir $(1)),$(2))) |
| endef |
| define add-radio-file-checked-internal |
| INSTALLED_RADIOIMAGE_TARGET += $$(PRODUCT_OUT)/$(2) |
| BOARD_INFO_CHECK += $(3):$(LOCAL_PATH)/$(1) |
| $$(PRODUCT_OUT)/$(2) : $$(LOCAL_PATH)/$(1) |
| $$(transform-prebuilt-to-target) |
| endef |
| |
| |
| ########################################################### |
| # Override the package defined in $(1), setting the |
| # variables listed below differently. |
| # |
| # $(1): The makefile to override (relative to the source |
| # tree root) |
| # $(2): Old LOCAL_PACKAGE_NAME value. |
| # $(3): New LOCAL_PACKAGE_NAME value. |
| # $(4): New LOCAL_MANIFEST_PACKAGE_NAME value. |
| # $(5): New LOCAL_CERTIFICATE value. |
| # $(6): New LOCAL_INSTRUMENTATION_FOR value. |
| # $(7): New LOCAL_MANIFEST_INSTRUMENTATION_FOR value. |
| # |
| # Note that LOCAL_PACKAGE_OVERRIDES is NOT cleared in |
| # clear_vars.mk. |
| ########################################################### |
| define inherit-package |
| $(eval $(call inherit-package-internal,$(1),$(2),$(3),$(4),$(5),$(6),$(7))) |
| endef |
| |
| define inherit-package-internal |
| LOCAL_PACKAGE_OVERRIDES \ |
| := $(strip $(1))||$(strip $(2))||$(strip $(3))||$(strip $(4))||&&$(strip $(5))||&&$(strip $(6))||&&$(strip $(7)) $(LOCAL_PACKAGE_OVERRIDES) |
| include $(1) |
| LOCAL_PACKAGE_OVERRIDES \ |
| := $(wordlist 1,$(words $(LOCAL_PACKAGE_OVERRIDES)), $(LOCAL_PACKAGE_OVERRIDES)) |
| endef |
| |
| # To be used with inherit-package above |
| # Evalutes to true if the package was overridden |
| define set-inherited-package-variables |
| $(strip $(call set-inherited-package-variables-internal)) |
| endef |
| |
| define keep-or-override |
| $(eval $(1) := $(if $(2),$(2),$($(1)))) |
| endef |
| |
| define set-inherited-package-variables-internal |
| $(eval _o := $(subst ||, ,$(lastword $(LOCAL_PACKAGE_OVERRIDES)))) |
| $(eval _n := $(subst ||, ,$(firstword $(LOCAL_PACKAGE_OVERRIDES)))) |
| $(if $(filter $(word 2,$(_n)),$(LOCAL_PACKAGE_NAME)), \ |
| $(eval LOCAL_PACKAGE_NAME := $(word 3,$(_o))) \ |
| $(eval LOCAL_MANIFEST_PACKAGE_NAME := $(word 4,$(_o))) \ |
| $(call keep-or-override,LOCAL_CERTIFICATE,$(patsubst &&%,%,$(word 5,$(_o)))) \ |
| $(call keep-or-override,LOCAL_INSTRUMENTATION_FOR,$(patsubst &&%,%,$(word 6,$(_o)))) \ |
| $(call keep-or-override,LOCAL_MANIFEST_INSTRUMENTATION_FOR,$(patsubst &&%,%,$(word 7,$(_o)))) \ |
| $(eval LOCAL_OVERRIDES_PACKAGES := $(sort $(LOCAL_OVERRIDES_PACKAGES) $(word 2,$(_o)))) \ |
| true \ |
| ,) |
| endef |
| |
| ########################################################### |
| ## API Check |
| ########################################################### |
| |
| # eval this to define a rule that runs apicheck. |
| # |
| # Args: |
| # $(1) target |
| # $(2) stable api file |
| # $(3) api file to be tested |
| # $(4) stable removed api file |
| # $(5) removed api file to be tested |
| # $(6) arguments for apicheck |
| # $(7) command to run if apicheck failed |
| # $(8) target dependent on this api check |
| # $(9) additional dependencies |
| define check-api |
| $(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/$(strip $(1))-timestamp: $(2) $(3) $(4) $(APICHECK) $(9) |
| @echo "Checking API:" $(1) |
| $(hide) ( $(APICHECK_COMMAND) $(6) $(2) $(3) $(4) $(5) || ( $(7) ; exit 38 ) ) |
| $(hide) mkdir -p $$(dir $$@) |
| $(hide) touch $$@ |
| $(8): $(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/$(strip $(1))-timestamp |
| endef |
| |
| ## Whether to build from source if prebuilt alternative exists |
| ########################################################### |
| # $(1): module name |
| # $(2): LOCAL_PATH |
| # Expands to empty string if not from source. |
| ifeq (true,$(ANDROID_BUILD_FROM_SOURCE)) |
| define if-build-from-source |
| true |
| endef |
| else |
| define if-build-from-source |
| $(if $(filter $(ANDROID_NO_PREBUILT_MODULES),$(1))$(filter \ |
| $(addsuffix %,$(ANDROID_NO_PREBUILT_PATHS)),$(2)),true) |
| endef |
| endif |
| |
| # Include makefile $(1) if build from source for module $(2) |
| # $(1): the makefile to include |
| # $(2): module name |
| # $(3): LOCAL_PATH |
| define include-if-build-from-source |
| $(if $(call if-build-from-source,$(2),$(3)),$(eval include $(1))) |
| endef |
| |
| # Return the arch for the source file of a prebuilt |
| # Return "none" if no matching arch found and return empty |
| # if the input is empty, so the result can be passed to |
| # LOCAL_MODULE_TARGET_ARCH. |
| # $(1) the list of archs supported by the prebuilt |
| define get-prebuilt-src-arch |
| $(strip $(if $(filter $(TARGET_ARCH),$(1)),$(TARGET_ARCH),\ |
| $(if $(filter $(TARGET_2ND_ARCH),$(1)),$(TARGET_2ND_ARCH),$(if $(1),none)))) |
| endef |
| |
| # ############################################################### |
| # Set up statistics gathering |
| # ############################################################### |
| STATS.MODULE_TYPE := \ |
| HOST_STATIC_LIBRARY \ |
| HOST_SHARED_LIBRARY \ |
| STATIC_LIBRARY \ |
| SHARED_LIBRARY \ |
| EXECUTABLE \ |
| HOST_EXECUTABLE \ |
| PACKAGE \ |
| PHONY_PACKAGE \ |
| HOST_PREBUILT \ |
| PREBUILT \ |
| MULTI_PREBUILT \ |
| JAVA_LIBRARY \ |
| STATIC_JAVA_LIBRARY \ |
| HOST_JAVA_LIBRARY \ |
| DROIDDOC \ |
| COPY_HEADERS \ |
| NATIVE_TEST \ |
| NATIVE_BENCHMARK \ |
| HOST_NATIVE_TEST \ |
| FUZZ_TEST \ |
| HOST_FUZZ_TEST \ |
| STATIC_TEST_LIBRARY \ |
| HOST_STATIC_TEST_LIBRARY \ |
| NOTICE_FILE \ |
| HOST_DALVIK_JAVA_LIBRARY \ |
| HOST_DALVIK_STATIC_JAVA_LIBRARY \ |
| base_rules \ |
| HEADER_LIBRARY \ |
| HOST_TEST_CONFIG \ |
| TARGET_TEST_CONFIG |
| |
| $(foreach s,$(STATS.MODULE_TYPE),$(eval STATS.MODULE_TYPE.$(s) :=)) |
| define record-module-type |
| $(strip $(if $(LOCAL_RECORDED_MODULE_TYPE),, |
| $(if $(filter-out $(SOONG_ANDROID_MK),$(LOCAL_MODULE_MAKEFILE)), |
| $(if $(filter $(1),$(STATS.MODULE_TYPE)), |
| $(eval LOCAL_RECORDED_MODULE_TYPE := true) |
| $(eval STATS.MODULE_TYPE.$(1) += 1), |
| $(error Invalid module type: $(1)))))) |
| endef |
| |
| ########################################################### |
| ## Compatibility suite tools |
| ########################################################### |
| |
| # Return a list of output directories for a given suite and the current LOCAL_MODULE. |
| # Can be passed a subdirectory to use for the common testcase directory. |
| define compatibility_suite_dirs |
| $(strip \ |
| $(COMPATIBILITY_TESTCASES_OUT_$(1)) \ |
| $($(my_prefix)OUT_TESTCASES)/$(LOCAL_MODULE)$(2)) |
| endef |
| |
| # For each suite: |
| # 1. Copy the files to the many suite output directories. |
| # And for test config files, we'll check the .xml is well-formed before copy. |
| # 2. Add all the files to each suite's dependent files list. |
| # 3. Do the dependency addition to my_all_targets |
| # Requires for each suite: use my_compat_dist_config_$(suite) to define the test config. |
| # and use my_compat_dist_$(suite) to define the others. |
| define create-suite-dependencies |
| $(foreach suite, $(LOCAL_COMPATIBILITY_SUITE), \ |
| $(eval COMPATIBILITY.$(suite).FILES := \ |
| $$(COMPATIBILITY.$(suite).FILES) $$(foreach f,$$(my_compat_dist_$(suite)),$$(call word-colon,2,$$(f))) \ |
| $$(foreach f,$$(my_compat_dist_config_$(suite)),$$(call word-colon,2,$$(f))))) \ |
| $(eval $(my_all_targets) : $(call copy-many-files, \ |
| $(sort $(foreach suite,$(LOCAL_COMPATIBILITY_SUITE),$(my_compat_dist_$(suite))))) \ |
| $(call copy-many-xml-files-checked, \ |
| $(sort $(foreach suite,$(LOCAL_COMPATIBILITY_SUITE),$(my_compat_dist_config_$(suite)))))) |
| endef |
| |
| ########################################################### |
| ## Path Cleaning |
| ########################################################### |
| |
| # Remove "dir .." combinations (but keep ".. ..") |
| # |
| # $(1): The expanded path, where / is converted to ' ' to work with $(word) |
| define _clean-path-strip-dotdot |
| $(strip \ |
| $(if $(word 2,$(1)), |
| $(if $(call streq,$(word 2,$(1)),..), |
| $(if $(call streq,$(word 1,$(1)),..), |
| $(word 1,$(1)) $(call _clean-path-strip-dotdot,$(wordlist 2,$(words $(1)),$(1))) |
| , |
| $(call _clean-path-strip-dotdot,$(wordlist 3,$(words $(1)),$(1))) |
| ) |
| , |
| $(word 1,$(1)) $(call _clean-path-strip-dotdot,$(wordlist 2,$(words $(1)),$(1))) |
| ) |
| , |
| $(1) |
| ) |
| ) |
| endef |
| |
| # Remove any leading .. from the path (in case of /..) |
| # |
| # Should only be called if the original path started with / |
| # $(1): The expanded path, where / is converted to ' ' to work with $(word) |
| define _clean-path-strip-root-dotdots |
| $(strip $(if $(call streq,$(firstword $(1)),..), |
| $(call _clean-path-strip-root-dotdots,$(wordlist 2,$(words $(1)),$(1))), |
| $(1))) |
| endef |
| |
| # Call _clean-path-strip-dotdot until the path stops changing |
| # $(1): Non-empty if this path started with a / |
| # $(2): The expanded path, where / is converted to ' ' to work with $(word) |
| define _clean-path-expanded |
| $(strip \ |
| $(eval _ep := $(call _clean-path-strip-dotdot,$(2))) |
| $(if $(1),$(eval _ep := $(call _clean-path-strip-root-dotdots,$(_ep)))) |
| $(if $(call streq,$(2),$(_ep)), |
| $(_ep), |
| $(call _clean-path-expanded,$(1),$(_ep)))) |
| endef |
| |
| # Clean the file path -- remove //, dir/.., extra . |
| # |
| # This should be the same semantics as golang's filepath.Clean |
| # |
| # $(1): The file path to clean |
| define clean-path |
| $(strip \ |
| $(if $(call streq,$(words $(1)),1), |
| $(eval _rooted := $(filter /%,$(1))) |
| $(eval _expanded_path := $(filter-out .,$(subst /,$(space),$(1)))) |
| $(eval _path := $(if $(_rooted),/)$(subst $(space),/,$(call _clean-path-expanded,$(_rooted),$(_expanded_path)))) |
| $(if $(_path), |
| $(_path), |
| . |
| ) |
| , |
| $(if $(call streq,$(words $(1)),0), |
| ., |
| $(error Call clean-path with only one path (without spaces)) |
| ) |
| ) |
| ) |
| endef |
| |
| ifeq ($(TEST_MAKE_clean_path),true) |
| define my_test |
| $(if $(call streq,$(call clean-path,$(1)),$(2)),, |
| $(eval my_failed := true) |
| $(warning clean-path test '$(1)': expected '$(2)', got '$(call clean-path,$(1))')) |
| endef |
| my_failed := |
| |
| # Already clean |
| $(call my_test,abc,abc) |
| $(call my_test,abc/def,abc/def) |
| $(call my_test,a/b/c,a/b/c) |
| $(call my_test,.,.) |
| $(call my_test,..,..) |
| $(call my_test,../..,../..) |
| $(call my_test,../../abc,../../abc) |
| $(call my_test,/abc,/abc) |
| $(call my_test,/,/) |
| |
| # Empty is current dir |
| $(call my_test,,.) |
| |
| # Remove trailing slash |
| $(call my_test,abc/,abc) |
| $(call my_test,abc/def/,abc/def) |
| $(call my_test,a/b/c/,a/b/c) |
| $(call my_test,./,.) |
| $(call my_test,../,..) |
| $(call my_test,../../,../..) |
| $(call my_test,/abc/,/abc) |
| |
| # Remove doubled slash |
| $(call my_test,abc//def//ghi,abc/def/ghi) |
| $(call my_test,//abc,/abc) |
| $(call my_test,///abc,/abc) |
| $(call my_test,//abc//,/abc) |
| $(call my_test,abc//,abc) |
| |
| # Remove . elements |
| $(call my_test,abc/./def,abc/def) |
| $(call my_test,/./abc/def,/abc/def) |
| $(call my_test,abc/.,abc) |
| |
| # Remove .. elements |
| $(call my_test,abc/def/ghi/../jkl,abc/def/jkl) |
| $(call my_test,abc/def/../ghi/../jkl,abc/jkl) |
| $(call my_test,abc/def/..,abc) |
| $(call my_test,abc/def/../..,.) |
| $(call my_test,/abc/def/../..,/) |
| $(call my_test,abc/def/../../..,..) |
| $(call my_test,/abc/def/../../..,/) |
| $(call my_test,abc/def/../../../ghi/jkl/../../../mno,../../mno) |
| $(call my_test,/../abc,/abc) |
| |
| # Combinations |
| $(call my_test,abc/./../def,def) |
| $(call my_test,abc//./../def,def) |
| $(call my_test,abc/../../././../def,../../def) |
| |
| ifdef my_failed |
| $(error failed clean-path test) |
| endif |
| endif |
| |
| ########################################################### |
| ## Given a filepath, returns nonempty if the path cannot be |
| ## validated to be contained in the current directory |
| ## This is, this function checks for '/' and '..' |
| ## |
| ## $(1): path to validate |
| define try-validate-path-is-subdir |
| $(strip |
| $(if $(filter /%,$(1)), |
| $(1) starts with a slash |
| ) |
| $(if $(filter ../%,$(call clean-path,$(1))), |
| $(1) escapes its parent using '..' |
| ) |
| $(if $(strip $(1)), |
| , |
| '$(1)' is empty |
| ) |
| ) |
| endef |
| |
| define validate-path-is-subdir |
| $(if $(call try-validate-path-is-subdir,$(1)), |
| $(call pretty-error, Illegal path: $(call try-validate-path-is-subdir,$(1))) |
| ) |
| endef |
| |
| ########################################################### |
| ## Given a space-delimited list of filepaths, returns |
| ## nonempty if any cannot be validated to be contained in |
| ## the current directory |
| ## |
| ## $(1): path list to validate |
| define try-validate-paths-are-subdirs |
| $(strip \ |
| $(foreach my_path,$(1),\ |
| $(call try-validate-path-is-subdir,$(my_path))\ |
| ) |
| ) |
| endef |
| |
| define validate-paths-are-subdirs |
| $(if $(call try-validate-paths-are-subdirs,$(1)), |
| $(call pretty-error,Illegal paths:\'$(call try-validate-paths-are-subdirs,$(1))\') |
| ) |
| endef |
| |
| ########################################################### |
| ## Tests of try-validate-path-is-subdir |
| ## and try-validate-paths-are-subdirs |
| define test-validate-paths-are-subdirs |
| $(eval my_error := $(call try-validate-path-is-subdir,/tmp)) \ |
| $(if $(call streq,$(my_error),/tmp starts with a slash), |
| , |
| $(error incorrect error message for path /tmp. Got '$(my_error)') |
| ) \ |
| $(eval my_error := $(call try-validate-path-is-subdir,../sibling)) \ |
| $(if $(call streq,$(my_error),../sibling escapes its parent using '..'), |
| , |
| $(error incorrect error message for path ../sibling. Got '$(my_error)') |
| ) \ |
| $(eval my_error := $(call try-validate-path-is-subdir,child/../../sibling)) \ |
| $(if $(call streq,$(my_error),child/../../sibling escapes its parent using '..'), |
| , |
| $(error incorrect error message for path child/../../sibling. Got '$(my_error)') |
| ) \ |
| $(eval my_error := $(call try-validate-path-is-subdir,)) \ |
| $(if $(call streq,$(my_error),'' is empty), |
| , |
| $(error incorrect error message for empty path ''. Got '$(my_error)') |
| ) \ |
| $(eval my_error := $(call try-validate-path-is-subdir,subdir/subsubdir)) \ |
| $(if $(call streq,$(my_error),), |
| , |
| $(error rejected valid path 'subdir/subsubdir'. Got '$(my_error)') |
| ) |
| |
| $(eval my_error := $(call try-validate-paths-are-subdirs,a/b /c/d e/f)) |
| $(if $(call streq,$(my_error),/c/d starts with a slash), |
| , |
| $(error incorrect error message for path list 'a/b /c/d e/f'. Got '$(my_error)') |
| ) |
| $(eval my_error := $(call try-validate-paths-are-subdirs,a/b c/d)) |
| $(if $(call streq,$(my_error),), |
| , |
| $(error rejected valid path list 'a/b c/d'. Got '$(my_error)') |
| ) |
| endef |
| # run test |
| $(strip $(call test-validate-paths-are-subdirs)) |
| |
| ########################################################### |
| ## Validate jacoco class filters and convert them to |
| ## file arguments |
| ## Jacoco class filters are comma-separated lists of class |
| ## files (android.app.Application), and may have '*' as the |
| ## last character to match all classes in a package |
| ## including subpackages. |
| define jacoco-class-filter-to-file-args |
| $(strip $(call jacoco-validate-file-args,\ |
| $(subst $(comma),$(space),\ |
| $(subst .,/,\ |
| $(strip $(1)))))) |
| endef |
| |
| define jacoco-validate-file-args |
| $(strip $(1)\ |
| $(call validate-paths-are-subdirs,$(1)) |
| $(foreach arg,$(1),\ |
| $(if $(findstring ?,$(arg)),$(call pretty-error,\ |
| '?' filters are not supported in LOCAL_JACK_COVERAGE_INCLUDE_FILTER or LOCAL_JACK_COVERAGE_EXCLUDE_FILTER))\ |
| $(if $(findstring *,$(patsubst %*,%,$(arg))),$(call pretty-error,\ |
| '*' is only supported at the end of a filter in LOCAL_JACK_COVERAGE_INCLUDE_FILTER or LOCAL_JACK_COVERAGE_EXCLUDE_FILTER))\ |
| )) |
| endef |
| |
| ########################################################### |
| ## Other includes |
| ########################################################### |
| |
| # ----------------------------------------------------------------- |
| # Rules and functions to help copy important files to DIST_DIR |
| # when requested. |
| include $(BUILD_SYSTEM)/distdir.mk |
| |
| # Include any vendor specific definitions.mk file |
| -include $(TOPDIR)vendor/*/build/core/definitions.mk |
| -include $(TOPDIR)device/*/build/core/definitions.mk |
| -include $(TOPDIR)product/*/build/core/definitions.mk |
| |
| # broken: |
| # $(foreach file,$^,$(if $(findstring,.a,$(suffix $file)),-l$(file),$(file))) |
| |
| ########################################################### |
| ## Misc notes |
| ########################################################### |
| |
| #DEPDIR = .deps |
| #df = $(DEPDIR)/$(*F) |
| |
| #SRCS = foo.c bar.c ... |
| |
| #%.o : %.c |
| # @$(MAKEDEPEND); \ |
| # cp $(df).d $(df).P; \ |
| # sed -e 's/#.*//' -e 's/^[^:]*: *//' -e 's/ *\\$$//' \ |
| # -e '/^$$/ d' -e 's/$$/ :/' < $(df).d >> $(df).P; \ |
| # rm -f $(df).d |
| # $(COMPILE.c) -o $@ $< |
| |
| #-include $(SRCS:%.c=$(DEPDIR)/%.P) |
| |
| |
| #%.o : %.c |
| # $(COMPILE.c) -MD -o $@ $< |
| # @cp $*.d $*.P; \ |
| # sed -e 's/#.*//' -e 's/^[^:]*: *//' -e 's/ *\\$$//' \ |
| # -e '/^$$/ d' -e 's/$$/ :/' < $*.d >> $*.P; \ |
| # rm -f $*.d |
| |
| |
| ########################################################### |
| # Append the information to generate a RRO package for the |
| # source module. |
| # |
| # $(1): Source module name. |
| # $(2): Whether $(3) is a manifest package name or not. |
| # $(3): Manifest package name if $(2) is true. |
| # Otherwise, android manifest file path of the |
| # source module. |
| # $(4): Whether LOCAL_EXPORT_PACKAGE_RESOURCES is set or |
| # not for the source module. |
| # $(5): Resource overlay list. |
| ########################################################### |
| define append_enforce_rro_sources |
| $(eval ENFORCE_RRO_SOURCES += \ |
| $(strip $(1))||$(strip $(2))||$(strip $(3))||$(strip $(4))||$(call normalize-path-list, $(strip $(5)))) |
| endef |
| |
| ########################################################### |
| # Generate all RRO packages for source modules stored in |
| # ENFORCE_RRO_SOURCES |
| ########################################################### |
| define generate_all_enforce_rro_packages |
| $(foreach source,$(ENFORCE_RRO_SOURCES), \ |
| $(eval _o := $(subst ||,$(space),$(source))) \ |
| $(eval enforce_rro_source_module := $(word 1,$(_o))) \ |
| $(eval enforce_rro_source_is_manifest_package_name := $(word 2,$(_o))) \ |
| $(eval enforce_rro_source_manifest_package_info := $(word 3,$(_o))) \ |
| $(eval enforce_rro_use_res_lib := $(word 4,$(_o))) \ |
| $(eval enforce_rro_source_overlays := $(subst :, ,$(word 5,$(_o)))) \ |
| $(eval enforce_rro_module := $(enforce_rro_source_module)__auto_generated_rro) \ |
| $(eval include $(BUILD_SYSTEM)/generate_enforce_rro.mk) \ |
| $(eval ALL_MODULES.$(enforce_rro_source_module).REQUIRED += $(enforce_rro_module)) \ |
| ) |
| endef |
| |
| ########################################################### |
| ## Find system_$(VER) in LOCAL_SDK_VERSION |
| ## |
| ## $(1): LOCAL_SDK_VERSION |
| ########################################################### |
| define has-system-sdk-version |
| $(filter system_%,$(1)) |
| endef |
| |
| ########################################################### |
| ## Get numerical version in LOCAL_SDK_VERSION |
| ## |
| ## $(1): LOCAL_SDK_VERSION |
| ########################################################### |
| define get-numeric-sdk-version |
| $(filter-out current,\ |
| $(if $(call has-system-sdk-version,$(1)),$(patsubst system_%,%,$(1)),$(1))) |
| endef |
| |
| ########################################################### |
| ## Convert to lower case without requiring a shell, which isn't cacheable. |
| ## |
| ## $(1): string |
| ########################################################### |
| to-lower=$(subst A,a,$(subst B,b,$(subst C,c,$(subst D,d,$(subst E,e,$(subst F,f,$(subst G,g,$(subst H,h,$(subst I,i,$(subst J,j,$(subst K,k,$(subst L,l,$(subst M,m,$(subst N,n,$(subst O,o,$(subst P,p,$(subst Q,q,$(subst R,r,$(subst S,s,$(subst T,t,$(subst U,u,$(subst V,v,$(subst W,w,$(subst X,x,$(subst Y,y,$(subst Z,z,$1)))))))))))))))))))))))))) |
| |
| ########################################################### |
| ## Convert to upper case without requiring a shell, which isn't cacheable. |
| ## |
| ## $(1): string |
| ########################################################### |
| to-upper=$(subst a,A,$(subst b,B,$(subst c,C,$(subst d,D,$(subst e,E,$(subst f,F,$(subst g,G,$(subst h,H,$(subst i,I,$(subst j,J,$(subst k,K,$(subst l,L,$(subst m,M,$(subst n,N,$(subst o,O,$(subst p,P,$(subst q,Q,$(subst r,R,$(subst s,S,$(subst t,T,$(subst u,U,$(subst v,V,$(subst w,W,$(subst x,X,$(subst y,Y,$(subst z,Z,$1)))))))))))))))))))))))))) |
| |
| # Sanity-check to-lower and to-upper |
| lower := abcdefghijklmnopqrstuvwxyz-_ |
| upper := ABCDEFGHIJKLMNOPQRSTUVWXYZ-_ |
| |
| ifneq ($(lower),$(call to-lower,$(upper))) |
| $(error to-lower sanity check failure) |
| endif |
| |
| ifneq ($(upper),$(call to-upper,$(lower))) |
| $(error to-upper sanity check failure) |
| endif |
| |
| lower := |
| upper := |
| |
| ########################################################### |
| ## Verify module name meets character requirements: |
| ## a-z A-Z 0-9 |
| ## _.+-,@~ |
| ## |
| ## This is a subset of bazel's target name restrictions: |
| ## https://docs.bazel.build/versions/master/build-ref.html#name |
| ## |
| ## Kati has problems with '=': https://github.com/google/kati/issues/138 |
| ########################################################### |
| define verify-module-name |
| $(if $(filter-out $(LOCAL_MODULE),$(subst /,,$(LOCAL_MODULE))), \ |
| $(call pretty-warning,Module name contains a /$(comma) use LOCAL_MODULE_STEM and LOCAL_MODULE_RELATIVE_PATH instead)) \ |
| $(if $(call _invalid-name-chars,$(LOCAL_MODULE)), \ |
| $(call pretty-error,Invalid characters in module name: $(call _invalid-name-chars,$(LOCAL_MODULE)))) |
| endef |
| define _invalid-name-chars |
| $(subst _,,$(subst .,,$(subst +,,$(subst -,,$(subst $(comma),,$(subst @,,$(subst ~,,$(subst 0,,$(subst 1,,$(subst 2,,$(subst 3,,$(subst 4,,$(subst 5,,$(subst 6,,$(subst 7,,$(subst 8,,$(subst 9,,$(subst a,,$(subst b,,$(subst c,,$(subst d,,$(subst e,,$(subst f,,$(subst g,,$(subst h,,$(subst i,,$(subst j,,$(subst k,,$(subst l,,$(subst m,,$(subst n,,$(subst o,,$(subst p,,$(subst q,,$(subst r,,$(subst s,,$(subst t,,$(subst u,,$(subst v,,$(subst w,,$(subst x,,$(subst y,,$(subst z,,$(call to-lower,$(1))))))))))))))))))))))))))))))))))))))))))))) |
| endef |
| .KATI_READONLY := verify-module-name _invalid-name-chars |
| |
| ########################################################### |
| ## Verify module stem meets character requirements: |
| ## a-z A-Z 0-9 |
| ## _.+-,@~ |
| ## |
| ## This is a subset of bazel's target name restrictions: |
| ## https://docs.bazel.build/versions/master/build-ref.html#name |
| ## |
| ## $(1): The module stem variable to check |
| ########################################################### |
| define verify-module-stem |
| $(if $(filter-out $($(1)),$(subst /,,$($(1)))), \ |
| $(call pretty-warning,Module stem \($(1)\) contains a /$(comma) use LOCAL_MODULE_RELATIVE_PATH instead)) \ |
| $(if $(call _invalid-name-chars,$($(1))), \ |
| $(call pretty-error,Invalid characters in module stem \($(1)\): $(call _invalid-name-chars,$($(1))))) |
| endef |
| .KATI_READONLY := verify-module-stem |