diff --git a/Changes.md b/Changes.md
index 37bbad0..2d5cd97 100644
--- a/Changes.md
+++ b/Changes.md
@@ -1,5 +1,282 @@
 # Build System Changes for Android.mk Writers
 
+## `BUILD_NUMBER` removal from Android.mk  {#BUILD_NUMBER}
+
+`BUILD_NUMBER` should not be used directly in Android.mk files, as it would
+trigger them to be re-read every time the `BUILD_NUMBER` changes (which it does
+on every build server build). If possible, just remove the use so that your
+builds are more reproducible. If you do need it, use `BUILD_NUMBER_FROM_FILE`:
+
+``` make
+$(LOCAL_BUILT_MODULE):
+	mytool --build_number $(BUILD_NUMBER_FROM_FILE) -o $@
+```
+
+That will expand out to a subshell that will read the current `BUILD_NUMBER`
+whenever it's run. It will not re-run your command if the build number has
+changed, so incremental builds will have the build number from the last time
+the particular output was rebuilt.
+
+## `DIST_DIR`, `dist_goal`, and `dist-for-goals`  {#dist}
+
+`DIST_DIR` and `dist_goal` are no longer available when reading Android.mk
+files (or other build tasks). Always use `dist-for-goals` instead, which takes
+a PHONY goal, and a list of files to copy to `$DIST_DIR`. Whenever `dist` is
+specified, and the goal would be built (either explicitly on the command line,
+or as a dependency of something on the command line), that file will be copied
+into `$DIST_DIR`. For example,
+
+``` make
+$(call dist-for-goals,foo,bar/baz)
+```
+
+will copy `bar/baz` into `$DIST_DIR/baz` when `m foo dist` is run.
+
+#### Renames during copy
+
+Instead of specifying just a file, a destination name can be specified,
+including subdirectories:
+
+``` make
+$(call dist-for-goals,foo,bar/baz:logs/foo.log)
+```
+
+will copy `bar/baz` into `$DIST_DIR/logs/foo.log` when `m foo dist` is run.
+
+## `.PHONY` rule enforcement  {#phony_targets}
+
+There are several new warnings/errors meant to ensure the proper use of
+`.PHONY` targets in order to improve the speed and reliability of incremental
+builds.
+
+`.PHONY`-marked targets are often used as shortcuts to provide "friendly" names
+for real files to be built, but any target marked with `.PHONY` is also always
+considered dirty, needing to be rebuilt every build. This isn't a problem for
+aliases or one-off user-requested operations, but if real builds steps depend
+on a `.PHONY` target, it can get quite expensive for what should be a tiny
+build.
+
+``` make
+...mk:42: warning: PHONY target "out/.../foo" looks like a real file (contains a "/")
+```
+
+Between this warning and the next, we're requiring that `.PHONY` targets do not
+have "/" in them, and real file targets do have a "/". This makes it more
+obvious when reading makefiles what is happening, and will help the build
+system differentiate these in the future too.
+
+``` make
+...mk:42: warning: writing to readonly directory: "kernel-modules"
+```
+
+This warning will show up for one of two reasons:
+
+1. The target isn't intended to be a real file, and should be marked with
+   `.PHONY`. This would be the case for this example.
+2. The target is a real file, but it's outside the output directories. All
+   outputs from the build system should be within the output directory,
+   otherwise `m clean` is unable to clean the build, and future builds may not
+   work properly.
+
+``` make
+...mk:42: warning: real file "out/.../foo" depends on PHONY target "buildbins"
+```
+
+If the first target isn't intended to be a real file, then it should be marked
+with `.PHONY`, which will satisfy this warning. This isn't the case for this
+example, as we require `.PHONY` targets not to have '/' in them.
+
+If the second (PHONY) target is a real file, it may unnecessarily be marked
+with `.PHONY`.
+
+### `.PHONY` and calling other build systems
+
+One common pattern (mostly outside AOSP) that we've seen hit these warning is
+when building with external build systems (firmware, bootloader, kernel, etc).
+Those are often marked as `.PHONY` because the Android build system doesn't
+have enough dependencies to know when to run the other build system again
+during an incremental build.
+
+We recommend to build these outside of Android, and deliver prebuilts into the
+Android tree instead of decreasing the speed and reliability of the incremental
+Android build.
+
+In cases where that's not desired, to preserve the speed of Android
+incrementals, over-specifying dependencies is likely a better option than
+marking it with `.PHONY`:
+
+``` make
+out/target/.../zImage: $(sort $(shell find -L $(KERNEL_SRCDIR)))
+	...
+```
+
+For reliability, many of these other build systems do not guarantee the same
+level of incremental build assurances as the Android Build is attempting to do
+-- without custom checks, Make doesn't rebuild objects when CFLAGS change, etc.
+In order to fix this, our recommendation is to do clean builds for each of
+these external build systems every time anything they rely on changes. For
+relatively smaller builds (like the kernel), this may be reasonable as long as
+you're not trying to actively debug the kernel.
+
+## `export` and `unexport` deprecation  {#export_keyword}
+
+The `export` and `unexport` keywords have been deprecated, and will throw
+warnings or errors depending on where they are used.
+
+Early in the make system, during product configuration and BoardConfig.mk
+reading: these will throw a warnings, and will be an error in the future.
+Device specific configuration should not be able to affect common core build
+steps -- we're looking at triggering build steps to be invalidated if the set
+of environment variables they can access changes. If device specific
+configuration is allowed to change those, switching devices with the same
+output directory could become significantly more expensive than it already can
+be.
+
+Later, during Android.mk files, and later tasks: these will throw errors, since
+it is increasingly likely that they are being used incorrectly, attempting to
+change the environment for a single build step, and instead setting it for
+hundreds of thousands.
+
+It is not recommended to just move the environment variable setting outside of
+the build (in vendorsetup.sh, or some other configuration script or wrapper).
+We expect to limit the environment variables that the build respects in the
+future, others will be cleared. (There will be methods to get custom variables
+into the build, just not to every build step)
+
+Instead, write the export commands into the rule command lines themselves:
+
+``` make
+$(intermediates)/generated_output.img:
+	rm -rf $@
+	export MY_ENV_A="$(MY_A)"; make ...
+```
+
+If you want to set many environment variables, and/or use them many times,
+write them out to a script and source the script:
+
+``` make
+envsh := $(intermediates)/env.sh
+$(envsh):
+	rm -rf $@
+	echo 'export MY_ENV_A="$(MY_A)"' >$@
+	echo 'export MY_ENV_B="$(MY_B)"' >>$@
+
+$(intermediates)/generated_output.img: PRIVATE_ENV := $(envsh)
+$(intermediates)/generated_output.img: $(envsh) a/b/c/package.sh
+	rm -rf $@
+	source $(PRIVATE_ENV); make ...
+	source $(PRIVATE_ENV); a/b/c/package.sh ...
+```
+
+## Implicit make rules are obsolete {#implicit_rules}
+
+Implicit rules look something like the following:
+
+``` make
+$(TARGET_OUT_SHARED_LIBRARIES)/%_vendor.so: $(TARGET_OUT_SHARED_LIBRARIES)/%.so
+	...
+
+%.o : %.foo
+	...
+```
+
+These can have wide ranging effects across unrelated modules, so they're now obsolete. Instead, use static pattern rules, which are similar, but explicitly match the specified outputs:
+
+``` make
+libs := $(foreach lib,libfoo libbar,$(TARGET_OUT_SHARED_LIBRARIES)/$(lib)_vendor.so)
+$(libs): %_vendor.so: %.so
+	...
+
+files := $(wildcard $(LOCAL_PATH)/*.foo)
+gen := $(patsubst $(LOCAL_PATH)/%.foo,$(intermediates)/%.o,$(files))
+$(gen): %.o : %.foo
+	...
+```
+
+## Removing '/' from Valid Module Names {#name_slash}
+
+The build system uses module names in path names in many places. Having an
+extra '/' or '../' being inserted can cause problems -- and not just build
+breaks, but stranger invalid behavior.
+
+In every case we've seen, the fix is relatively simple: move the directory into
+`LOCAL_MODULE_RELATIVE_PATH` (or `LOCAL_MODULE_PATH` if you're still using it).
+If this causes multiple modules to be named the same, use unique module names
+and `LOCAL_MODULE_STEM` to change the installed file name:
+
+``` make
+include $(CLEAR_VARS)
+LOCAL_MODULE := ver1/code.bin
+LOCAL_MODULE_PATH := $(TARGET_OUT_ETC)/firmware
+...
+include $(BUILD_PREBUILT)
+
+include $(CLEAR_VARS)
+LOCAL_MODULE := ver2/code.bin
+LOCAL_MODULE_PATH := $(TARGET_OUT_ETC)/firmware
+...
+include $(BUILD_PREBUILT)
+```
+
+Can be rewritten as:
+
+```
+include $(CLEAR_VARS)
+LOCAL_MODULE := ver1_code.bin
+LOCAL_MODULE_STEM := code.bin
+LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR)/firmware/ver1
+...
+include $(BUILD_PREBUILT)
+
+include $(CLEAR_VARS)
+LOCAL_MODULE := ver2_code.bin
+LOCAL_MODULE_STEM := code.bin
+LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR)/firmware/ver2
+...
+include $(BUILD_PREBUILT)
+```
+
+You just need to make sure that any other references (`PRODUCT_PACKAGES`,
+`LOCAL_REQUIRED_MODULES`, etc) are converted to the new names.
+
+## Valid Module Names {#name}
+
+We've adopted lexical requirements very similar to [Bazel's
+requirements](https://docs.bazel.build/versions/master/build-ref.html#name) for
+target names. Valid characters are `a-z`, `A-Z`, `0-9`, and the special
+characters `_.+-=,@~`. This currently applies to `LOCAL_PACKAGE_NAME`,
+`LOCAL_MODULE`, and `LOCAL_MODULE_SUFFIX`, and `LOCAL_MODULE_STEM*`.
+
+Many other characters already caused problems if you used them, so we don't
+expect this to have a large effect.
+
+## PATH Tools {#PATH_Tools}
+
+The build has started restricting the external host tools usable inside the
+build. This will help ensure that build results are reproducible across
+different machines, and catch mistakes before they become larger issues.
+
+To start with, this includes replacing the $PATH with our own directory of
+tools, mirroring that of the host PATH.  The only difference so far is the
+removal of the host GCC tools. Anything that is not explicitly in the
+configuration as allowed will continue functioning, but will generate a log
+message. This is expected to become more restrictive over time.
+
+The configuration is located in build/soong/ui/build/paths/config.go, and
+contains all the common tools in use in many builds. Anything not in that list
+will currently print a warning in the `$OUT_DIR/soong.log` file, including the
+command and arguments used, and the process tree in order to help locate the
+usage.
+
+In order to fix any issues brought up by these checks, the best way to fix them
+is to use tools checked into the tree -- either as prebuilts, or building them
+as host tools during the build.
+
+As a temporary measure, you can set `TEMPORARY_DISABLE_PATH_RESTRICTIONS=true`
+in your environment to temporarily turn off the error checks and allow any tool
+to be used (with logging). Beware that GCC didn't work well with the interposer
+used for logging, so this may not help in all cases.
+
 ## Deprecating / obsoleting envsetup.sh variables in Makefiles
 
 It is not required to source envsetup.sh before running a build. Many scripts,
diff --git a/CleanSpec.mk b/CleanSpec.mk
index 7677261..8058d86 100644
--- a/CleanSpec.mk
+++ b/CleanSpec.mk
@@ -488,6 +488,40 @@
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/priv-app/Launcher3)
 $(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS/Launcher3_intermediates)
 
+# Remove old merged AndroidManifest.xml location
+$(call add-clean-step, rm -rf $(TARGET_OUT_COMMON_INTERMEDIATES)/APPS/*_intermediates/AndroidManifest.xml)
+
+$(call add-clean-step, find $(PRODUCT_OUT) -type f -name "vr_hwc*" -print0 | xargs -0 rm -f)
+
+$(call add-clean-step, rm -rf $(SOONG_OUT_DIR)/.intermediates/system/vold)
+
+# Remove product-services related files / images
+$(call add-clean-step, find $(PRODUCT_OUT) -type f -name "*product-services*" -print0 | xargs -0 rm -rf)
+$(call add-clean-step, find $(PRODUCT_OUT) -type d -name "*product-services*" -print0 | xargs -0 rm -rf)
+$(call add-clean-step, find $(PRODUCT_OUT) -type l -name "*product-services*" -print0 | xargs -0 rm -rf)
+
+# Remove obsolete recovery etc files
+$(call add-clean-step, rm -rf $(TARGET_RECOVERY_ROOT_OUT)/etc)
+
+# Remove *_OUT_INTERMEDIATE_LIBRARIES
+$(call add-clean-step, rm -rf $(addsuffix /lib,\
+  $(HOST_OUT_INTERMEDIATES) $(2ND_HOST_OUT_INTERMEDIATES) \
+  $(HOST_CROSS_OUT_INTERMEDIATES) $(2ND_HOST_CROSS_OUT_INTERMEDIATES) \
+  $(TARGET_OUT_INTERMEDIATES) $(2ND_TARGET_OUT_INTERMEDIATES)))
+
+# Remove strip.sh intermediates to save space
+$(call add-clean-step, find $(OUT_DIR) \( -name "*.so.debug" -o -name "*.so.dynsyms" -o -name "*.so.funcsyms" -o -name "*.so.keep_symbols" -o -name "*.so.mini_debuginfo.xz" \) -print0 | xargs -0 rm -f)
+
+# Clean up old ninja files
+$(call add-clean-step, rm -f $(OUT_DIR)/build-*-dist*.ninja)
+
+$(call add-clean-step, rm -f $(HOST_OUT)/*ts/host-libprotobuf-java-*.jar)
+
+$(call add-clean-step, find $(OUT_DIR)/target/product/mainline_arm64/system -type f -name "*.*dex" -print0 | xargs -0 rm -f)
+
+# Clean up aidegen
+$(call add-clean-step, rm -f $(HOST_OUT)/bin/aidegen)
+
 # ************************************************
 # NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST
 # ************************************************
diff --git a/OWNERS b/OWNERS
index 1e9b763..b9fee4e 100644
--- a/OWNERS
+++ b/OWNERS
@@ -2,10 +2,7 @@
 dwillemsen@google.com
 nanzhang@google.com
 
-per-file * = ccross@android.com
-per-file * = dwillemsen@google.com
-per-file * = nanzhang@google.com
+per-file * = ccross@android.com,dwillemsen@google.com,nanzhang@google.com
 
 # for version updates
-per-file version_defaults.mk = aseaton@google.com
-per-file version_defaults.mk = elisapascual@google.com
+per-file version_defaults.mk = aseaton@google.com,elisapascual@google.com
diff --git a/Usage.txt b/Usage.txt
index 004210b..558329b 100644
--- a/Usage.txt
+++ b/Usage.txt
@@ -29,7 +29,7 @@
   An alternative to setting $TARGET_PRODUCT and $TARGET_BUILD_VARIANT,
   which you may see in build servers, is to execute:
 
-    make PRODUCT-<product>-<variant>
+    m PRODUCT-<product>-<variant>
 
 
   A target may be a file path. For example, out/host/linux-x86/bin/adb .
@@ -46,6 +46,17 @@
     files named Android.bp
       these files are defined in Blueprint syntax
 
+  During a build, a few log files are generated in ${OUT} (or ${DIST_DIR}/logs
+    for dist builds):
+
+    verbose.log.gz
+      every command run, along with its outputs. This is similar to the
+      previous `m showcommands` option.
+    error.log
+      list of actions that failed during the build, and their outputs.
+    soong.log
+      verbose debug information from soong_ui
+
   For now, the full (extremely large) compiled list of targets can be found
     (after running the build once), split among these two files:
 
@@ -57,8 +68,6 @@
     tool here.
 
 Targets that adjust an existing build:
-  showcommands              Display the individual commands run to implement
-                            the build
   dist                      Copy into ${DIST_DIR} the portion of the build
                             that must be distributed
 
@@ -71,7 +80,7 @@
   Variables can either be set in the surrounding shell environment or can be
     passed as command-line arguments. For example:
       export I_AM_A_SHELL_VAR=1
-      I_AM_ANOTHER_SHELL_VAR=2 make droid I_AM_A_MAKE_VAR=3
+      I_AM_ANOTHER_SHELL_VAR=2 m droid I_AM_A_MAKE_VAR=3
   Here are some common variables and their meanings:
     TARGET_PRODUCT          The <product> to build # as described above
     TARGET_BUILD_VARIANT    The <variant> to build # as described above
diff --git a/common/core.mk b/common/core.mk
new file mode 100644
index 0000000..e5264b0
--- /dev/null
+++ b/common/core.mk
@@ -0,0 +1,56 @@
+#
+# Copyright (C) 2018 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# Only use ANDROID_BUILD_SHELL to wrap around bash.
+# DO NOT use other shells such as zsh.
+ifdef ANDROID_BUILD_SHELL
+SHELL := $(ANDROID_BUILD_SHELL)
+else
+# Use bash, not whatever shell somebody has installed as /bin/sh
+# This is repeated from main.mk, since envsetup.sh runs this file
+# directly.
+SHELL := /bin/bash
+endif
+
+# Utility variables.
+empty :=
+space := $(empty) $(empty)
+comma := ,
+# Note that make will eat the newline just before endef.
+define newline
+
+
+endef
+# The pound character "#"
+define pound
+#
+endef
+# Unfortunately you can't simply define backslash as \ or \\.
+backslash := \a
+backslash := $(patsubst %a,%,$(backslash))
+
+# Prevent accidentally changing these variables
+.KATI_READONLY := SHELL empty space comma newline pound backslash
+
+# Basic warning/error wrappers. These will be redefined to include the local
+# module information when reading Android.mk files.
+define pretty-warning
+$(warning $(1))
+endef
+
+define pretty-error
+$(error $(1))
+endef
diff --git a/common/math.mk b/common/math.mk
new file mode 100644
index 0000000..ac3151e
--- /dev/null
+++ b/common/math.mk
@@ -0,0 +1,270 @@
+#
+# Copyright (C) 2017 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+###########################################################
+# Basic math functions for non-negative integers <= 100
+#
+# (SDK versions for example)
+###########################################################
+__MATH_POS_NUMBERS :=  1  2  3  4  5  6  7  8  9 10 11 12 13 14 15 16 17 18 19 20 \
+                      21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 \
+                      41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 \
+                      61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 \
+                      81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
+__MATH_NUMBERS := 0 $(__MATH_POS_NUMBERS)
+
+math-error = $(call pretty-error,$(1))
+math-expect :=
+math-expect-true :=
+math-expect :=
+math-expect-error :=
+
+# Run the math tests with:
+#  make -f ${ANDROID_BUILD_TOP}/build/make/core/math.mk RUN_MATH_TESTS=true
+#  $(get_build_var CKATI) -f ${ANDROID_BUILD_TOP}//build/make/core/math.mk RUN_MATH_TESTS=true
+ifdef RUN_MATH_TESTS
+  MATH_TEST_FAILURE :=
+  MATH_TEST_ERROR :=
+  math-error = $(if $(MATH_TEST_ERROR),,$(eval MATH_TEST_ERROR:=$(1)))
+  define math-expect
+    $(eval got:=$$$1) \
+    $(if $(subst $(got),,$(2))$(subst $(2),,$(got))$(MATH_TEST_ERROR), \
+      $(if $(MATH_TEST_ERROR),$(warning $(MATH_TEST_ERROR)),$(warning $$$1 '$(got)' != '$(2)')) \
+      $(eval MATH_TEST_FAILURE := true)) \
+    $(eval MATH_TEST_ERROR :=) \
+    $(eval got:=)
+  endef
+  math-expect-true = $(call math-expect,$(1),true)
+  math-expect-false = $(call math-expect,$(1),)
+
+  define math-expect-error
+    $(eval got:=$$$1) \
+    $(if $(subst $(MATH_TEST_ERROR),,$(2))$(subst $(2),,$(MATH_TEST_ERROR)), \
+      $(warning '$(MATH_TEST_ERROR)' != '$(2)') \
+      $(eval MATH_TEST_FAILURE := true)) \
+    $(eval MATH_TEST_ERROR :=) \
+    $(eval got:=)
+  endef
+endif
+
+# Returns true if $(1) is a non-negative integer <= 100, otherwise returns nothing.
+define math_is_number
+$(strip \
+  $(if $(1),,$(call math-error,Argument missing)) \
+  $(if $(word 2,$(1)),$(call math-error,Multiple words in a single argument: $(1))) \
+  $(if $(filter $(1),$(__MATH_NUMBERS)),true))
+endef
+
+define math_is_zero
+$(strip \
+  $(if $(word 2,$(1)),$(call math-error,Multiple words in a single argument: $(1))) \
+  $(if $(filter 0,$(1)),true))
+endef
+
+$(call math-expect-true,(call math_is_number,0))
+$(call math-expect-true,(call math_is_number,2))
+$(call math-expect-false,(call math_is_number,foo))
+$(call math-expect-false,(call math_is_number,-1))
+$(call math-expect-error,(call math_is_number,1 2),Multiple words in a single argument: 1 2)
+$(call math-expect-error,(call math_is_number,no 2),Multiple words in a single argument: no 2)
+
+$(call math-expect-true,(call math_is_zero,0))
+$(call math-expect-false,(call math_is_zero,1))
+$(call math-expect-false,(call math_is_zero,foo))
+$(call math-expect-error,(call math_is_zero,1 2),Multiple words in a single argument: 1 2)
+$(call math-expect-error,(call math_is_zero,no 2),Multiple words in a single argument: no 2)
+
+define _math_check_valid
+$(if $(call math_is_number,$(1)),,$(call math-error,Only non-negative integers <= 100 are supported (not $(1))))
+endef
+
+$(call math-expect,(call _math_check_valid,0))
+$(call math-expect,(call _math_check_valid,1))
+$(call math-expect,(call _math_check_valid,100))
+$(call math-expect-error,(call _math_check_valid,-1),Only non-negative integers <= 100 are supported (not -1))
+$(call math-expect-error,(call _math_check_valid,101),Only non-negative integers <= 100 are supported (not 101))
+$(call math-expect-error,(call _math_check_valid,),Argument missing)
+$(call math-expect-error,(call _math_check_valid,1 2),Multiple words in a single argument: 1 2)
+
+# return a list containing integers ranging from [$(1),$(2)]
+define int_range_list
+$(strip \
+  $(call _math_check_valid,$(1))$(call _math_check_valid,$(2)) \
+  $(if $(call math_is_zero,$(1)),0)\
+  $(wordlist $(if $(call math_is_zero,$(1)),1,$(1)),$(2),$(__MATH_POS_NUMBERS)))
+endef
+
+$(call math-expect,(call int_range_list,0,1),0 1)
+$(call math-expect,(call int_range_list,1,1),1)
+$(call math-expect,(call int_range_list,1,2),1 2)
+$(call math-expect,(call int_range_list,2,1),)
+$(call math-expect-error,(call int_range_list,1,101),Only non-negative integers <= 100 are supported (not 101))
+
+
+# Returns the greater of $1 or $2.
+# If $1 or $2 is not a positive integer <= 100, then an error is generated.
+define math_max
+$(strip $(call _math_check_valid,$(1)) $(call _math_check_valid,$(2)) \
+  $(lastword $(filter $(1) $(2),$(__MATH_NUMBERS))))
+endef
+
+$(call math-expect-error,(call math_max),Argument missing)
+$(call math-expect-error,(call math_max,1),Argument missing)
+$(call math-expect-error,(call math_max,1 2,3),Multiple words in a single argument: 1 2)
+$(call math-expect,(call math_max,0,1),1)
+$(call math-expect,(call math_max,1,0),1)
+$(call math-expect,(call math_max,1,1),1)
+$(call math-expect,(call math_max,5,42),42)
+$(call math-expect,(call math_max,42,5),42)
+
+define math_gt_or_eq
+$(if $(filter $(1),$(call math_max,$(1),$(2))),true)
+endef
+
+define math_lt
+$(if $(call math_gt_or_eq,$(1),$(2)),,true)
+endef
+
+$(call math-expect-true,(call math_gt_or_eq, 2, 1))
+$(call math-expect-true,(call math_gt_or_eq, 1, 1))
+$(call math-expect-false,(call math_gt_or_eq, 1, 2))
+
+# $1 is the variable name to increment
+define inc_and_print
+$(strip $(eval $(1) := $($(1)) .)$(words $($(1))))
+endef
+
+ifdef RUN_MATH_TESTS
+a :=
+$(call math-expect,(call inc_and_print,a),1)
+$(call math-expect,(call inc_and_print,a),2)
+$(call math-expect,(call inc_and_print,a),3)
+$(call math-expect,(call inc_and_print,a),4)
+endif
+
+# Returns the words in $2 that are numbers and are less than $1
+define numbers_less_than
+$(strip \
+  $(foreach n,$2, \
+    $(if $(call math_is_number,$(n)), \
+      $(if $(call math_lt,$(n),$(1)), \
+        $(n)))))
+endef
+
+$(call math-expect,(call numbers_less_than,0,0 1 2 3),)
+$(call math-expect,(call numbers_less_than,1,0 2 1 3),0)
+$(call math-expect,(call numbers_less_than,2,0 2 1 3),0 1)
+$(call math-expect,(call numbers_less_than,3,0 2 1 3),0 2 1)
+$(call math-expect,(call numbers_less_than,4,0 2 1 3),0 2 1 3)
+$(call math-expect,(call numbers_less_than,3,0 2 1 3 2),0 2 1 2)
+
+_INT_LIMIT_WORDS := $(foreach a,x x,$(foreach b,x x x x x x x x x x x x x x x x,\
+  $(foreach c,x x x x x x x x x x x x x x x x,x x x x x x x x x x x x x x x x)))
+
+define _int_encode
+$(if $(filter $(words x $(_INT_LIMIT_WORDS)),$(words $(wordlist 1,$(1),x $(_INT_LIMIT_WORDS)))),\
+  $(call math-error,integer greater than $(words $(_INT_LIMIT_WORDS)) is not supported!),\
+    $(wordlist 1,$(1),$(_INT_LIMIT_WORDS)))
+endef
+
+# _int_max returns the maximum of the two arguments
+# input: two (x) lists; output: one (x) list
+# integer cannot be passed in directly. It has to be converted using _int_encode.
+define _int_max
+$(subst xx,x,$(join $(1),$(2)))
+endef
+
+# first argument is greater than second argument
+# output: non-empty if true
+# integer cannot be passed in directly. It has to be converted using _int_encode.
+define _int_greater-than
+$(filter-out $(words $(2)),$(words $(call _int_max,$(1),$(2))))
+endef
+
+# first argument equals to second argument
+# output: non-empty if true
+# integer cannot be passed in directly. It has to be converted using _int_encode.
+define _int_equal
+$(filter $(words $(1)),$(words $(2)))
+endef
+
+# first argument is greater than or equal to second argument
+# output: non-empty if true
+# integer cannot be passed in directly. It has to be converted using _int_encode.
+define _int_greater-or-equal
+$(call _int_greater-than,$(1),$(2))$(call _int_equal,$(1),$(2))
+endef
+
+define int_plus
+$(words $(call _int_encode,$(1)) $(call _int_encode,$(2)))
+endef
+
+$(call math-expect,(call int_plus,0,0),0)
+$(call math-expect,(call int_plus,0,1),1)
+$(call math-expect,(call int_plus,1,0),1)
+$(call math-expect,(call int_plus,1,100),101)
+$(call math-expect,(call int_plus,100,100),200)
+
+define int_subtract
+$(strip \
+  $(if $(call _int_greater-or-equal,$(call _int_encode,$(1)),$(call _int_encode,$(2))),\
+  $(words $(filter-out xx,$(join $(call _int_encode,$(1)),$(call _int_encode,$(2))))),\
+    $(call math-error,subtract underflow $(1) - $(2))))
+endef
+
+$(call math-expect,(call int_subtract,0,0),0)
+$(call math-expect,(call int_subtract,1,0),1)
+$(call math-expect,(call int_subtract,1,1),0)
+$(call math-expect,(call int_subtract,100,1),99)
+$(call math-expect,(call int_subtract,200,100),100)
+$(call math-expect-error,(call int_subtract,0,1),subtract underflow 0 - 1)
+
+define int_multiply
+$(words $(foreach a,$(call _int_encode,$(1)),$(call _int_encode,$(2))))
+endef
+
+$(call math-expect,(call int_multiply,0,0),0)
+$(call math-expect,(call int_multiply,1,0),0)
+$(call math-expect,(call int_multiply,1,1),1)
+$(call math-expect,(call int_multiply,100,1),100)
+$(call math-expect,(call int_multiply,1,100),100)
+$(call math-expect,(call int_multiply,4,100),400)
+$(call math-expect,(call int_multiply,100,4),400)
+
+define int_divide
+$(if $(filter 0,$(2)),$(call math-error,division by zero is not allowed!),$(strip \
+  $(if $(call _int_greater-or-equal,$(call _int_encode,$(1)),$(call _int_encode,$(2))), \
+    $(call int_plus,$(call int_divide,$(call int_subtract,$(1),$(2)),$(2)),1),0)))
+endef
+
+$(call math-expect,(call int_divide,1,1),1)
+$(call math-expect,(call int_divide,200,1),200)
+$(call math-expect,(call int_divide,200,3),66)
+$(call math-expect,(call int_divide,1,2),0)
+$(call math-expect-error,(call int_divide,0,0),division by zero is not allowed!)
+$(call math-expect-error,(call int_divide,1,0),division by zero is not allowed!)
+
+ifdef RUN_MATH_TESTS
+  ifdef MATH_TEST_FAILURE
+    math-tests:
+	@echo FAIL
+	@false
+  else
+    math-tests:
+	@echo PASS
+  endif
+  .PHONY: math-tests
+endif
diff --git a/common/strings.mk b/common/strings.mk
new file mode 100644
index 0000000..ce6d6fb
--- /dev/null
+++ b/common/strings.mk
@@ -0,0 +1,117 @@
+#
+# Copyright (C) 2018 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+###########################################################
+## Convert to lower case without requiring a shell, which isn't cacheable.
+##
+## $(1): string
+###########################################################
+to-lower=$(subst A,a,$(subst B,b,$(subst C,c,$(subst D,d,$(subst E,e,$(subst F,f,$(subst G,g,$(subst H,h,$(subst I,i,$(subst J,j,$(subst K,k,$(subst L,l,$(subst M,m,$(subst N,n,$(subst O,o,$(subst P,p,$(subst Q,q,$(subst R,r,$(subst S,s,$(subst T,t,$(subst U,u,$(subst V,v,$(subst W,w,$(subst X,x,$(subst Y,y,$(subst Z,z,$1))))))))))))))))))))))))))
+
+###########################################################
+## Convert to upper case without requiring a shell, which isn't cacheable.
+##
+## $(1): string
+###########################################################
+to-upper=$(subst a,A,$(subst b,B,$(subst c,C,$(subst d,D,$(subst e,E,$(subst f,F,$(subst g,G,$(subst h,H,$(subst i,I,$(subst j,J,$(subst k,K,$(subst l,L,$(subst m,M,$(subst n,N,$(subst o,O,$(subst p,P,$(subst q,Q,$(subst r,R,$(subst s,S,$(subst t,T,$(subst u,U,$(subst v,V,$(subst w,W,$(subst x,X,$(subst y,Y,$(subst z,Z,$1))))))))))))))))))))))))))
+
+# Sanity-check to-lower and to-upper
+lower := abcdefghijklmnopqrstuvwxyz-_
+upper := ABCDEFGHIJKLMNOPQRSTUVWXYZ-_
+
+ifneq ($(lower),$(call to-lower,$(upper)))
+  $(error to-lower sanity check failure)
+endif
+
+ifneq ($(upper),$(call to-upper,$(lower)))
+  $(error to-upper sanity check failure)
+endif
+
+lower :=
+upper :=
+
+###########################################################
+## Returns true if $(1) and $(2) are equal.  Returns
+## the empty string if they are not equal.
+###########################################################
+define streq
+$(strip $(if $(strip $(1)),\
+  $(if $(strip $(2)),\
+    $(if $(filter-out __,_$(subst $(strip $(1)),,$(strip $(2)))$(subst $(strip $(2)),,$(strip $(1)))_),,true), \
+    ),\
+  $(if $(strip $(2)),\
+    ,\
+    true)\
+ ))
+endef
+
+###########################################################
+## Convert "a b c" into "a:b:c"
+###########################################################
+define normalize-path-list
+$(subst $(space),:,$(strip $(1)))
+endef
+
+###########################################################
+## Convert "a b c" into "a,b,c"
+###########################################################
+define normalize-comma-list
+$(subst $(space),$(comma),$(strip $(1)))
+endef
+
+###########################################################
+## Read the word out of a colon-separated list of words.
+## This has the same behavior as the built-in function
+## $(word n,str).
+##
+## The individual words may not contain spaces.
+##
+## $(1): 1 based index
+## $(2): value of the form a:b:c...
+###########################################################
+
+define word-colon
+$(word $(1),$(subst :,$(space),$(2)))
+endef
+
+###########################################################
+## Convert "a=b c= d e = f" into "a=b c=d e=f"
+##
+## $(1): list to collapse
+## $(2): if set, separator word; usually "=", ":", or ":="
+##       Defaults to "=" if not set.
+###########################################################
+
+define collapse-pairs
+$(eval _cpSEP := $(strip $(if $(2),$(2),=)))\
+$(strip $(subst $(space)$(_cpSEP)$(space),$(_cpSEP),$(strip \
+    $(subst $(_cpSEP), $(_cpSEP) ,$(1)))$(space)))
+endef
+
+###########################################################
+## Given a list of pairs, if multiple pairs have the same
+## first components, keep only the first pair.
+##
+## $(1): list of pairs
+## $(2): the separator word, such as ":", "=", etc.
+define uniq-pairs-by-first-component
+$(eval _upbfc_fc_set :=)\
+$(strip $(foreach w,$(1), $(eval _first := $(word 1,$(subst $(2),$(space),$(w))))\
+    $(if $(filter $(_upbfc_fc_set),$(_first)),,$(w)\
+        $(eval _upbfc_fc_set += $(_first)))))\
+$(eval _upbfc_fc_set :=)\
+$(eval _first:=)
+endef
diff --git a/core/Makefile b/core/Makefile
index 0a2f6e3..ff986e1 100644
--- a/core/Makefile
+++ b/core/Makefile
@@ -36,16 +36,20 @@
             $(eval $(call copy-xml-file-checked,$(_src),$(_fulldest))),\
             $(if $(and $(filter %.jar,$(_dest)),$(filter $(basename $(notdir $(_dest))),$(PRODUCT_LOADED_BY_PRIVILEGED_MODULES))),\
                 $(eval $(call copy-and-uncompress-dexs,$(_src),$(_fulldest))), \
-                $(eval $(call copy-one-file,$(_src),$(_fulldest))))) \
-        $(eval ALL_DEFAULT_INSTALLED_MODULES += $(_fulldest)) \
+                $(if $(filter init%rc,$(notdir $(_dest)))$(filter %/etc/init,$(dir $(_dest))),\
+                    $(eval $(call copy-init-script-file-checked,$(_src),$(_fulldest))),\
+                    $(eval $(call copy-one-file,$(_src),$(_fulldest)))))) \
         $(eval unique_product_copy_files_destinations += $(_dest))))
 
 # Dump a list of overriden (and ignored PRODUCT_COPY_FILES entries)
-$(file >$(PRODUCT_OUT)/product_copy_files_ignored.txt,$(subst $(space),$(newline),$(strip $(product_copy_files_ignored))))
-ifdef dist_goal
-$(file >$(DIST_DIR)/logs/product_copy_files_ignored.txt,$(subst $(space),$(newline),$(strip $(product_copy_files_ignored))))
-endif
+pcf_ignored_file := $(PRODUCT_OUT)/product_copy_files_ignored.txt
+$(pcf_ignored_file): PRIVATE_IGNORED := $(sort $(product_copy_files_ignored))
+$(pcf_ignored_file):
+	echo "$(PRIVATE_IGNORED)" | tr " " "\n" >$@
 
+$(call dist-for-goals,droidcore,$(pcf_ignored_file):logs/$(notdir $(pcf_ignored_file)))
+
+pcf_ignored_file :=
 product_copy_files_ignored :=
 unique_product_copy_files_pairs :=
 unique_product_copy_files_destinations :=
@@ -68,15 +72,24 @@
 # If more than one makefile declared a header, print a warning,
 # then copy the last one defined. This matches the previous make
 # behavior.
+has_dup_copy_headers :=
 $(foreach dest,$(ALL_COPIED_HEADERS), \
     $(eval _srcs := $(ALL_COPIED_HEADERS.$(dest).SRC)) \
     $(eval _src := $(word $(words $(_srcs)),$(_srcs))) \
     $(if $(call streq,$(_src),$(_srcs)),, \
         $(warning Duplicate header copy: $(dest)) \
-	$(warning Defined in: $(ALL_COPIED_HEADERS.$(dest).MAKEFILE))) \
+	$(warning Defined in: $(ALL_COPIED_HEADERS.$(dest).MAKEFILE)) \
+	$(eval has_dup_copy_headers := true)) \
     $(eval $(call copy-one-header,$(_src),$(dest))))
 all_copied_headers: $(ALL_COPIED_HEADERS)
 
+ifdef has_dup_copy_headers
+  has_dup_copy_headers :=
+  ifneq ($(BUILD_BROKEN_DUP_COPY_HEADERS),true)
+    $(error duplicate header copies are no longer allowed. For more information about headers, see: https://android.googlesource.com/platform/build/soong/+/master/docs/best_practices.md#headers)
+  endif
+endif
+
 # -----------------------------------------------------------------
 # docs/index.html
 ifeq (,$(TARGET_BUILD_APPS))
@@ -134,11 +147,54 @@
 endif
 FINAL_VENDOR_DEFAULT_PROPERTIES += \
     $(call collapse-pairs, $(PRODUCT_DEFAULT_PROPERTY_OVERRIDES))
+
+FINAL_VENDOR_DEFAULT_PROPERTIES += ro.bionic.arch=$(TARGET_ARCH)
+FINAL_VENDOR_DEFAULT_PROPERTIES += ro.bionic.cpu_variant=$(TARGET_CPU_VARIANT)
+FINAL_VENDOR_DEFAULT_PROPERTIES += ro.bionic.2nd_arch=$(TARGET_2ND_ARCH)
+FINAL_VENDOR_DEFAULT_PROPERTIES += ro.bionic.2nd_cpu_variant=$(TARGET_2ND_CPU_VARIANT)
+
+# Although these variables are prefixed with TARGET_RECOVERY_, they are also needed under charger
+# mode (via libminui).
+ifdef TARGET_RECOVERY_DEFAULT_ROTATION
+FINAL_VENDOR_DEFAULT_PROPERTIES += \
+    ro.minui.default_rotation=$(TARGET_RECOVERY_DEFAULT_ROTATION)
+endif
+ifdef TARGET_RECOVERY_OVERSCAN_PERCENT
+FINAL_VENDOR_DEFAULT_PROPERTIES += \
+    ro.minui.overscan_percent=$(TARGET_RECOVERY_OVERSCAN_PERCENT)
+endif
+ifdef TARGET_RECOVERY_PIXEL_FORMAT
+FINAL_VENDOR_DEFAULT_PROPERTIES += \
+    ro.minui.pixel_format=$(TARGET_RECOVERY_PIXEL_FORMAT)
+endif
 FINAL_VENDOR_DEFAULT_PROPERTIES := $(call uniq-pairs-by-first-component, \
     $(FINAL_VENDOR_DEFAULT_PROPERTIES),=)
 
 # -----------------------------------------------------------------
 # prop.default
+
+BUILDINFO_SH := build/make/tools/buildinfo.sh
+BUILDINFO_COMMON_SH := build/make/tools/buildinfo_common.sh
+# Generates a set of common build system properties to a file.
+# $(1): Partition name
+# $(2): Output file name
+define generate-common-build-props
+	BUILD_FINGERPRINT="$(BUILD_FINGERPRINT_FROM_FILE)" \
+	BUILD_ID="$(BUILD_ID)" \
+	BUILD_NUMBER="$(BUILD_NUMBER_FROM_FILE)" \
+	BUILD_VERSION_TAGS="$(BUILD_VERSION_TAGS)" \
+	DATE="$(DATE_FROM_FILE)" \
+	PLATFORM_SDK_VERSION="$(PLATFORM_SDK_VERSION)" \
+	PLATFORM_VERSION="$(PLATFORM_VERSION)" \
+	PRODUCT_BRAND="$(PRODUCT_BRAND)" \
+	PRODUCT_MANUFACTURER="$(PRODUCT_MANUFACTURER)" \
+	PRODUCT_MODEL="$(PRODUCT_MODEL)" \
+	PRODUCT_NAME="$(TARGET_PRODUCT)" \
+	TARGET_BUILD_TYPE="$(TARGET_BUILD_VARIANT)" \
+	TARGET_DEVICE="$(TARGET_DEVICE)" \
+	bash $(BUILDINFO_COMMON_SH) "$(1)" >> $(2)
+endef
+
 ifdef property_overrides_split_enabled
 INSTALLED_DEFAULT_PROP_TARGET := $(TARGET_OUT)/etc/prop.default
 INSTALLED_DEFAULT_PROP_OLD_TARGET := $(TARGET_ROOT_OUT)/default.prop
@@ -161,7 +217,7 @@
 
 intermediate_system_build_prop := $(call intermediates-dir-for,ETC,system_build_prop)/build.prop
 
-$(INSTALLED_DEFAULT_PROP_TARGET): $(intermediate_system_build_prop)
+$(INSTALLED_DEFAULT_PROP_TARGET): $(BUILDINFO_COMMON_SH) $(intermediate_system_build_prop)
 	@echo Target buildinfo: $@
 	@mkdir -p $(dir $@)
 	@rm -f $@
@@ -169,13 +225,11 @@
 	        echo "# ADDITIONAL_DEFAULT_PROPERTIES" >> $@; \
 	        echo "#" >> $@;
 	$(hide) $(foreach line,$(FINAL_DEFAULT_PROPERTIES), \
-		echo "$(line)" >> $@;)
+	    echo "$(line)" >> $@;)
 	$(hide) echo "#" >> $@; \
 	        echo "# BOOTIMAGE_BUILD_PROPERTIES" >> $@; \
 	        echo "#" >> $@;
-	$(hide) echo ro.bootimage.build.date=`$(DATE_FROM_FILE)`>>$@
-	$(hide) echo ro.bootimage.build.date.utc=`$(DATE_FROM_FILE) +%s`>>$@
-	$(hide) echo ro.bootimage.build.fingerprint="$(BUILD_FINGERPRINT_FROM_FILE)">>$@
+	$(hide) $(call generate-common-build-props,bootimage,$@)
 	$(hide) build/make/tools/post_process_props.py $@
 ifdef property_overrides_split_enabled
 	$(hide) mkdir -p $(TARGET_ROOT_OUT)
@@ -196,7 +250,7 @@
 	        echo "# ADDITIONAL VENDOR DEFAULT PROPERTIES" >> $@; \
 	        echo "#" >> $@;
 	$(hide) $(foreach line,$(FINAL_VENDOR_DEFAULT_PROPERTIES), \
-		echo "$(line)" >> $@;)
+	    echo "$(line)" >> $@;)
 	$(hide) build/make/tools/post_process_props.py $@
 
 endif  # property_overrides_split_enabled
@@ -298,9 +352,6 @@
 $(strip $(subst _,-, $(firstword $(1))))
 endef
 
-BUILDINFO_SH := build/make/tools/buildinfo.sh
-VENDOR_BUILDINFO_SH := build/make/tools/vendor_buildinfo.sh
-
 # TARGET_BUILD_FLAVOR and ro.build.flavor are used only by the test
 # harness to distinguish builds. Only add _asan for a sanitized build
 # if it isn't already a part of the flavor (via a dedicated lunch
@@ -317,7 +368,7 @@
 else
 system_prop_file := $(wildcard $(TARGET_DEVICE_DIR)/system.prop)
 endif
-$(intermediate_system_build_prop): $(BUILDINFO_SH) $(INTERNAL_BUILD_ID_MAKEFILE) $(BUILD_SYSTEM)/version_defaults.mk $(system_prop_file) $(INSTALLED_ANDROID_INFO_TXT_TARGET)
+$(intermediate_system_build_prop): $(BUILDINFO_SH) $(BUILDINFO_COMMON_SH) $(INTERNAL_BUILD_ID_MAKEFILE) $(BUILD_SYSTEM)/version_defaults.mk $(system_prop_file) $(INSTALLED_ANDROID_INFO_TXT_TARGET)
 	@echo Target buildinfo: $@
 	@mkdir -p $(dir $@)
 	$(hide) echo > $@
@@ -326,57 +377,59 @@
 	        echo "# PRODUCT_OEM_PROPERTIES" >> $@; \
 	        echo "#" >> $@;
 	$(hide) $(foreach prop,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_OEM_PROPERTIES), \
-		echo "import /oem/oem.prop $(prop)" >> $@;)
+	    echo "import /oem/oem.prop $(prop)" >> $@;)
 endif
+	$(hide) $(call generate-common-build-props,system,$@)
 	$(hide) TARGET_BUILD_TYPE="$(TARGET_BUILD_VARIANT)" \
-			TARGET_BUILD_FLAVOR="$(TARGET_BUILD_FLAVOR)" \
-			TARGET_DEVICE="$(TARGET_DEVICE)" \
-			PRODUCT_NAME="$(TARGET_PRODUCT)" \
-			PRODUCT_BRAND="$(PRODUCT_BRAND)" \
-			PRODUCT_DEFAULT_LOCALE="$(call get-default-product-locale,$(PRODUCT_LOCALES))" \
-			PRODUCT_DEFAULT_WIFI_CHANNELS="$(PRODUCT_DEFAULT_WIFI_CHANNELS)" \
-			PRODUCT_MODEL="$(PRODUCT_MODEL)" \
-			PRODUCT_MANUFACTURER="$(PRODUCT_MANUFACTURER)" \
-			PRIVATE_BUILD_DESC="$(PRIVATE_BUILD_DESC)" \
-			BUILD_ID="$(BUILD_ID)" \
-			BUILD_DISPLAY_ID="$(BUILD_DISPLAY_ID)" \
-			DATE="$(DATE_FROM_FILE)" \
-			BUILD_NUMBER="$(BUILD_NUMBER_FROM_FILE)" \
-			BOARD_BUILD_SYSTEM_ROOT_IMAGE="$(BOARD_BUILD_SYSTEM_ROOT_IMAGE)" \
-			AB_OTA_UPDATER="$(AB_OTA_UPDATER)" \
-			PLATFORM_VERSION="$(PLATFORM_VERSION)" \
-			PLATFORM_SECURITY_PATCH="$(PLATFORM_SECURITY_PATCH)" \
-			PLATFORM_BASE_OS="$(PLATFORM_BASE_OS)" \
-			PLATFORM_SDK_VERSION="$(PLATFORM_SDK_VERSION)" \
-			PLATFORM_PREVIEW_SDK_VERSION="$(PLATFORM_PREVIEW_SDK_VERSION)" \
-			PLATFORM_VERSION_CODENAME="$(PLATFORM_VERSION_CODENAME)" \
-			PLATFORM_VERSION_ALL_CODENAMES="$(PLATFORM_VERSION_ALL_CODENAMES)" \
-			PLATFORM_MIN_SUPPORTED_TARGET_SDK_VERSION="$(PLATFORM_MIN_SUPPORTED_TARGET_SDK_VERSION)" \
-			BUILD_VERSION_TAGS="$(BUILD_VERSION_TAGS)" \
-			BUILD_FINGERPRINT="$(BUILD_FINGERPRINT_FROM_FILE)" \
-			$(if $(OEM_THUMBPRINT_PROPERTIES),BUILD_THUMBPRINT="$(BUILD_THUMBPRINT_FROM_FILE)") \
-			TARGET_CPU_ABI_LIST="$(TARGET_CPU_ABI_LIST)" \
-			TARGET_CPU_ABI_LIST_32_BIT="$(TARGET_CPU_ABI_LIST_32_BIT)" \
-			TARGET_CPU_ABI_LIST_64_BIT="$(TARGET_CPU_ABI_LIST_64_BIT)" \
-			TARGET_CPU_ABI="$(TARGET_CPU_ABI)" \
-			TARGET_CPU_ABI2="$(TARGET_CPU_ABI2)" \
-			TARGET_AAPT_CHARACTERISTICS="$(TARGET_AAPT_CHARACTERISTICS)" \
+	        TARGET_BUILD_FLAVOR="$(TARGET_BUILD_FLAVOR)" \
+	        TARGET_DEVICE="$(TARGET_DEVICE)" \
+	        PRODUCT_NAME="$(TARGET_PRODUCT)" \
+	        PRODUCT_BRAND="$(PRODUCT_BRAND)" \
+	        PRODUCT_DEFAULT_LOCALE="$(call get-default-product-locale,$(PRODUCT_LOCALES))" \
+	        PRODUCT_DEFAULT_WIFI_CHANNELS="$(PRODUCT_DEFAULT_WIFI_CHANNELS)" \
+	        PRODUCT_MODEL="$(PRODUCT_MODEL)" \
+	        PRODUCT_MANUFACTURER="$(PRODUCT_MANUFACTURER)" \
+	        PRIVATE_BUILD_DESC="$(PRIVATE_BUILD_DESC)" \
+	        BUILD_ID="$(BUILD_ID)" \
+	        BUILD_DISPLAY_ID="$(BUILD_DISPLAY_ID)" \
+	        DATE="$(DATE_FROM_FILE)" \
+	        BUILD_NUMBER="$(BUILD_NUMBER_FROM_FILE)" \
+	        BOARD_BUILD_SYSTEM_ROOT_IMAGE="$(BOARD_BUILD_SYSTEM_ROOT_IMAGE)" \
+	        AB_OTA_UPDATER="$(AB_OTA_UPDATER)" \
+	        PLATFORM_VERSION="$(PLATFORM_VERSION)" \
+	        PLATFORM_SECURITY_PATCH="$(PLATFORM_SECURITY_PATCH)" \
+	        PLATFORM_BASE_OS="$(PLATFORM_BASE_OS)" \
+	        PLATFORM_SDK_VERSION="$(PLATFORM_SDK_VERSION)" \
+	        PLATFORM_PREVIEW_SDK_VERSION="$(PLATFORM_PREVIEW_SDK_VERSION)" \
+	        PLATFORM_VERSION_CODENAME="$(PLATFORM_VERSION_CODENAME)" \
+	        PLATFORM_VERSION_ALL_CODENAMES="$(PLATFORM_VERSION_ALL_CODENAMES)" \
+	        PLATFORM_MIN_SUPPORTED_TARGET_SDK_VERSION="$(PLATFORM_MIN_SUPPORTED_TARGET_SDK_VERSION)" \
+	        BUILD_VERSION_TAGS="$(BUILD_VERSION_TAGS)" \
+	        BUILD_FINGERPRINT="$(BUILD_FINGERPRINT_FROM_FILE)" \
+	        $(if $(OEM_THUMBPRINT_PROPERTIES),BUILD_THUMBPRINT="$(BUILD_THUMBPRINT_FROM_FILE)") \
+	        TARGET_CPU_ABI_LIST="$(TARGET_CPU_ABI_LIST)" \
+	        TARGET_CPU_ABI_LIST_32_BIT="$(TARGET_CPU_ABI_LIST_32_BIT)" \
+	        TARGET_CPU_ABI_LIST_64_BIT="$(TARGET_CPU_ABI_LIST_64_BIT)" \
+	        TARGET_CPU_ABI="$(TARGET_CPU_ABI)" \
+	        TARGET_CPU_ABI2="$(TARGET_CPU_ABI2)" \
 	        bash $(BUILDINFO_SH) >> $@
 	$(hide) $(foreach file,$(system_prop_file), \
-		if [ -f "$(file)" ]; then \
-			echo "#" >> $@; \
-			echo Target buildinfo from: "$(file)"; \
-			echo "# from $(file)" >> $@; \
-			echo "#" >> $@; \
-			cat $(file) >> $@; \
-		fi;)
+	    if [ -f "$(file)" ]; then \
+	        echo Target buildinfo from: "$(file)"; \
+	        echo "" >> $@; \
+	        echo "#" >> $@; \
+	        echo "# from $(file)" >> $@; \
+	        echo "#" >> $@; \
+	        cat $(file) >> $@; \
+	        echo "# end of $(file)" >> $@; \
+	    fi;)
 	$(if $(FINAL_BUILD_PROPERTIES), \
-		$(hide) echo >> $@; \
-		        echo "#" >> $@; \
-		        echo "# ADDITIONAL_BUILD_PROPERTIES" >> $@; \
-		        echo "#" >> $@; )
+	    $(hide) echo >> $@; \
+	            echo "#" >> $@; \
+	            echo "# ADDITIONAL_BUILD_PROPERTIES" >> $@; \
+	            echo "#" >> $@; )
 	$(hide) $(foreach line,$(FINAL_BUILD_PROPERTIES), \
-		echo "$(line)" >> $@;)
+	    echo "$(line)" >> $@;)
 	$(hide) cat $(INSTALLED_ANDROID_INFO_TXT_TARGET) | grep 'require version-' | sed -e 's/require version-/ro.build.expect./g' >> $@
 	$(hide) build/make/tools/post_process_props.py $@ $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_PROPERTY_BLACKLIST)
 
@@ -409,32 +462,24 @@
     $(FINAL_VENDOR_BUILD_PROPERTIES),=)
 endif  # property_overrides_split_enabled
 
-$(INSTALLED_VENDOR_BUILD_PROP_TARGET): $(VENDOR_BUILDINFO_SH) $(intermediate_system_build_prop)
+$(INSTALLED_VENDOR_BUILD_PROP_TARGET): $(BUILDINFO_COMMON_SH) $(intermediate_system_build_prop)
 	@echo Target vendor buildinfo: $@
 	@mkdir -p $(dir $@)
 	$(hide) echo > $@
 	$(hide) grep 'ro.product.first_api_level' $(intermediate_system_build_prop) >> $@ || true
-	$(hide) echo ro.vendor.build.date=`$(DATE_FROM_FILE)`>>$@
-	$(hide) echo ro.vendor.build.date.utc=`$(DATE_FROM_FILE) +%s`>>$@
-	$(hide) echo ro.vendor.build.fingerprint="$(BUILD_FINGERPRINT_FROM_FILE)">>$@
 	$(hide) echo ro.vendor.build.security_patch="$(VENDOR_SECURITY_PATCH)">>$@
 	$(hide) echo ro.vendor.product.cpu.abilist="$(TARGET_CPU_ABI_LIST)">>$@
 	$(hide) echo ro.vendor.product.cpu.abilist32="$(TARGET_CPU_ABI_LIST_32_BIT)">>$@
 	$(hide) echo ro.vendor.product.cpu.abilist64="$(TARGET_CPU_ABI_LIST_64_BIT)">>$@
-	$(hide) TARGET_DEVICE="$(TARGET_DEVICE)" \
-			PRODUCT_NAME="$(TARGET_PRODUCT)" \
-			PRODUCT_BRAND="$(PRODUCT_BRAND)" \
-			PRODUCT_MODEL="$(PRODUCT_MODEL)" \
-			PRODUCT_MANUFACTURER="$(PRODUCT_MANUFACTURER)" \
-			TARGET_BOOTLOADER_BOARD_NAME="$(TARGET_BOOTLOADER_BOARD_NAME)" \
-			TARGET_BOARD_PLATFORM="$(TARGET_BOARD_PLATFORM)" \
-	        bash $(VENDOR_BUILDINFO_SH) >> $@
+	$(hide) echo ro.product.board="$(TARGET_BOOTLOADER_BOARD_NAME)">>$@
+	$(hide) echo ro.board.platform="$(TARGET_BOARD_PLATFORM)">>$@
+	$(hide) $(call generate-common-build-props,vendor,$@)
 ifdef property_overrides_split_enabled
 	$(hide) echo "#" >> $@; \
 	        echo "# ADDITIONAL VENDOR BUILD PROPERTIES" >> $@; \
 	        echo "#" >> $@;
 	$(hide) $(foreach line,$(FINAL_VENDOR_BUILD_PROPERTIES), \
-		echo "$(line)" >> $@;)
+	    echo "$(line)" >> $@;)
 endif  # property_overrides_split_enabled
 	$(hide) build/make/tools/post_process_props.py $@ $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VENDOR_PROPERTY_BLACKLIST)
 
@@ -443,25 +488,89 @@
 INSTALLED_PRODUCT_BUILD_PROP_TARGET := $(TARGET_OUT_PRODUCT)/build.prop
 ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_PRODUCT_BUILD_PROP_TARGET)
 
+ifdef TARGET_PRODUCT_PROP
+product_prop_files := $(TARGET_PRODUCT_PROP)
+else
+product_prop_files := $(wildcard $(TARGET_DEVICE_DIR)/product.prop)
+endif
+
 FINAL_PRODUCT_PROPERTIES += \
-    $(call collapse-pairs, $(PRODUCT_PRODUCT_PROPERTIES))
+    $(call collapse-pairs, $(PRODUCT_PRODUCT_PROPERTIES) $(ADDITIONAL_PRODUCT_PROPERTIES))
 FINAL_PRODUCT_PROPERTIES := $(call uniq-pairs-by-first-component, \
     $(FINAL_PRODUCT_PROPERTIES),=)
 
-$(INSTALLED_PRODUCT_BUILD_PROP_TARGET):
+$(INSTALLED_PRODUCT_BUILD_PROP_TARGET): $(BUILDINFO_COMMON_SH) $(product_prop_files)
 	@echo Target product buildinfo: $@
 	@mkdir -p $(dir $@)
 	$(hide) echo > $@
 ifdef BOARD_USES_PRODUCTIMAGE
-	$(hide) echo ro.product.build.date=`$(DATE_FROM_FILE)`>>$@
-	$(hide) echo ro.product.build.date.utc=`$(DATE_FROM_FILE) +%s`>>$@
-	$(hide) echo ro.product.build.fingerprint="$(BUILD_FINGERPRINT_FROM_FILE)">>$@
+	$(hide) $(call generate-common-build-props,product,$@)
 endif  # BOARD_USES_PRODUCTIMAGE
+	$(hide) $(foreach file,$(product_prop_files), \
+	    if [ -f "$(file)" ]; then \
+	        echo Target product properties from: "$(file)"; \
+	        echo "" >> $@; \
+	        echo "#" >> $@; \
+	        echo "# from $(file)" >> $@; \
+	        echo "#" >> $@; \
+	        cat $(file) >> $@; \
+	        echo "# end of $(file)" >> $@; \
+	    fi;)
 	$(hide) echo "#" >> $@; \
 	        echo "# ADDITIONAL PRODUCT PROPERTIES" >> $@; \
-	        echo "#" >> $@;
+	        echo "#" >> $@; \
+	        echo "ro.build.characteristics=$(TARGET_AAPT_CHARACTERISTICS)" >> $@;
 	$(hide) $(foreach line,$(FINAL_PRODUCT_PROPERTIES), \
-		echo "$(line)" >> $@;)
+	    echo "$(line)" >> $@;)
+	$(hide) build/make/tools/post_process_props.py $@
+
+# ----------------------------------------------------------------
+# odm build.prop
+INSTALLED_ODM_BUILD_PROP_TARGET := $(TARGET_OUT_ODM)/build.prop
+ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_ODM_BUILD_PROP_TARGET)
+
+FINAL_ODM_BUILD_PROPERTIES += \
+    $(call collapse-pairs, $(PRODUCT_ODM_PROPERTIES))
+FINAL_ODM_BUILD_PROPERTIES := $(call uniq-pairs-by-first-component, \
+    $(FINAL_ODM_BUILD_PROPERTIES),=)
+
+$(INSTALLED_ODM_BUILD_PROP_TARGET): $(BUILDINFO_COMMON_SH)
+	@echo Target odm buildinfo: $@
+	@mkdir -p $(dir $@)
+	$(hide) echo > $@
+	$(hide) echo ro.odm.product.cpu.abilist="$(TARGET_CPU_ABI_LIST)">>$@
+	$(hide) echo ro.odm.product.cpu.abilist32="$(TARGET_CPU_ABI_LIST_32_BIT)">>$@
+	$(hide) echo ro.odm.product.cpu.abilist64="$(TARGET_CPU_ABI_LIST_64_BIT)">>$@
+	$(hide) $(call generate-common-build-props,odm,$@)
+	$(hide) echo "#" >> $@; \
+	        echo "# ADDITIONAL ODM BUILD PROPERTIES" >> $@; \
+	        echo "#" >> $@;
+	$(hide) $(foreach line,$(FINAL_ODM_BUILD_PROPERTIES), \
+	    echo "$(line)" >> $@;)
+	$(hide) build/make/tools/post_process_props.py $@
+
+# -----------------------------------------------------------------
+# product_services build.prop
+INSTALLED_PRODUCT_SERVICES_BUILD_PROP_TARGET := $(TARGET_OUT_PRODUCT_SERVICES)/build.prop
+ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_PRODUCT_SERVICES_BUILD_PROP_TARGET)
+
+FINAL_PRODUCT_SERVICES_PROPERTIES += \
+    $(call collapse-pairs, $(PRODUCT_PRODUCT_SERVICES_PROPERTIES))
+FINAL_PRODUCT_SERVICES_PROPERTIES := $(call uniq-pairs-by-first-component, \
+    $(FINAL_PRODUCT_SERVICES_PROPERTIES),=)
+
+$(INSTALLED_PRODUCT_SERVICES_BUILD_PROP_TARGET): $(BUILDINFO_COMMON_SH)
+	@echo Target product_services buildinfo: $@
+	@mkdir -p $(dir $@)
+	$(hide) echo > $@
+ifdef BOARD_USES_PRODUCT_SERVICESIMAGE
+	$(hide) $(call generate-common-build-props,product_services,$@)
+endif  # BOARD_USES_PRODUCT_SERVICESIMAGE
+	$(hide) echo "#" >> $@; \
+	        echo "# ADDITIONAL PRODUCT_SERVICES PROPERTIES" >> $@; \
+	        echo "#" >> $@;
+	$(hide) $(foreach line,$(FINAL_PRODUCT_SERVICES_PROPERTIES), \
+	    echo "$(line)" >> $@;)
 	$(hide) build/make/tools/post_process_props.py $@
 
 # ----------------------------------------------------------------
@@ -487,9 +596,9 @@
 	@echo SDK buildinfo: $@
 	@mkdir -p $(dir $@)
 	$(hide) grep -v "$(subst $(space),\|,$(strip \
-				$(sdk_build_prop_remove)))" $< > $@.tmp
+	            $(sdk_build_prop_remove)))" $< > $@.tmp
 	$(hide) for x in $(sdk_build_prop_remove); do \
-				echo "$$x"generic >> $@.tmp; done
+	            echo "$$x"generic >> $@.tmp; done
 	$(hide) mv $@.tmp $@
 
 # -----------------------------------------------------------------
@@ -602,7 +711,7 @@
 # for future OTA packages installed by this system.  Actual product
 # deliverables will be re-signed by hand.  We expect this file to
 # exist with the suffixes ".x509.pem" and ".pk8".
-DEFAULT_KEY_CERT_PAIR := $(DEFAULT_SYSTEM_DEV_CERTIFICATE)
+DEFAULT_KEY_CERT_PAIR := $(strip $(DEFAULT_SYSTEM_DEV_CERTIFICATE))
 
 
 # Rules that need to be present for the all targets, even
@@ -677,23 +786,52 @@
 endif
 
 # -----------------------------------------------------------------
-# the ramdisk
-INTERNAL_RAMDISK_FILES := $(filter $(TARGET_ROOT_OUT)/%, \
+# the root dir
+INTERNAL_ROOT_FILES := $(filter $(TARGET_ROOT_OUT)/%, \
 	$(ALL_GENERATED_SOURCES) \
 	$(ALL_DEFAULT_INSTALLED_MODULES))
 
+INSTALLED_FILES_FILE_ROOT := $(PRODUCT_OUT)/installed-files-root.txt
+INSTALLED_FILES_JSON_ROOT := $(INSTALLED_FILES_FILE_ROOT:.txt=.json)
+$(INSTALLED_FILES_FILE_ROOT): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_ROOT)
+$(INSTALLED_FILES_FILE_ROOT) : $(INTERNAL_ROOT_FILES) $(FILESLIST)
+	@echo Installed file list: $@
+	@mkdir -p $(dir $@)
+	@rm -f $@
+	$(hide) $(FILESLIST) $(TARGET_ROOT_OUT) > $(@:.txt=.json)
+	$(hide) build/make/tools/fileslist_util.py -c $(@:.txt=.json) > $@
+
+$(call dist-for-goals, sdk win_sdk sdk_addon, $(INSTALLED_FILES_FILE_ROOT))
+
+# -----------------------------------------------------------------
+# the ramdisk
+INTERNAL_RAMDISK_FILES := $(filter $(TARGET_RAMDISK_OUT)/%, \
+	$(ALL_GENERATED_SOURCES) \
+	$(ALL_DEFAULT_INSTALLED_MODULES))
+
+INSTALLED_FILES_FILE_RAMDISK := $(PRODUCT_OUT)/installed-files-ramdisk.txt
+INSTALLED_FILES_JSON_RAMDISK := $(INSTALLED_FILES_FILE_RAMDISK:.txt=.json)
+$(INSTALLED_FILES_FILE_RAMDISK): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_RAMDISK)
+$(INSTALLED_FILES_FILE_RAMDISK) : $(INTERNAL_RAMDISK_FILES) $(FILESLIST)
+	@echo Installed file list: $@
+	@mkdir -p $(dir $@)
+	@rm -f $@
+	$(hide) $(FILESLIST) $(TARGET_RAMDISK_OUT) > $(@:.txt=.json)
+	$(hide) build/make/tools/fileslist_util.py -c $(@:.txt=.json) > $@
+
+$(call dist-for-goals, sdk win_sdk sdk_addon, $(INSTALLED_FILES_FILE_RAMDISK))
 BUILT_RAMDISK_TARGET := $(PRODUCT_OUT)/ramdisk.img
 
 # We just build this directly to the install location.
 INSTALLED_RAMDISK_TARGET := $(BUILT_RAMDISK_TARGET)
-$(INSTALLED_RAMDISK_TARGET): $(MKBOOTFS) $(INTERNAL_RAMDISK_FILES) | $(MINIGZIP)
+$(INSTALLED_RAMDISK_TARGET): $(MKBOOTFS) $(INTERNAL_RAMDISK_FILES) $(INSTALLED_FILES_FILE_RAMDISK) | $(MINIGZIP)
 	$(call pretty,"Target ram disk: $@")
-	$(hide) $(MKBOOTFS) -d $(TARGET_OUT) $(TARGET_ROOT_OUT) | $(MINIGZIP) > $@
+	$(hide) $(MKBOOTFS) -d $(TARGET_OUT) $(TARGET_RAMDISK_OUT) | $(MINIGZIP) > $@
 
 .PHONY: ramdisk-nodeps
 ramdisk-nodeps: $(MKBOOTFS) | $(MINIGZIP)
 	@echo "make $@: ignoring dependencies"
-	$(hide) $(MKBOOTFS) -d $(TARGET_OUT) $(TARGET_ROOT_OUT) | $(MINIGZIP) > $(INSTALLED_RAMDISK_TARGET)
+	$(hide) $(MKBOOTFS) -d $(TARGET_OUT) $(TARGET_RAMDISK_OUT) | $(MINIGZIP) > $(INSTALLED_RAMDISK_TARGET)
 
 INSTALLED_BOOTIMAGE_TARGET := $(PRODUCT_OUT)/boot.img
 
@@ -735,13 +873,6 @@
     --os_version $(PLATFORM_VERSION) \
     --os_patch_level $(PLATFORM_SECURITY_PATCH)
 
-# BOARD_USES_RECOVERY_AS_BOOT = true must have BOARD_BUILD_SYSTEM_ROOT_IMAGE = true.
-ifeq ($(BOARD_USES_RECOVERY_AS_BOOT),true)
-ifneq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true)
-  $(error BOARD_BUILD_SYSTEM_ROOT_IMAGE must be enabled for BOARD_USES_RECOVERY_AS_BOOT.)
-endif
-endif
-
 # We build recovery as boot image if BOARD_USES_RECOVERY_AS_BOOT is true.
 ifneq ($(BOARD_USES_RECOVERY_AS_BOOT),true)
 ifeq ($(TARGET_BOOTIMAGE_USE_EXT2),true)
@@ -816,23 +947,18 @@
 endif # TARGET_BOOTIMAGE_USE_EXT2
 endif # BOARD_USES_RECOVERY_AS_BOOT
 
-else	# TARGET_NO_KERNEL
+else # TARGET_NO_KERNEL == "true"
 ifdef BOARD_PREBUILT_BOOTIMAGE
 ifneq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true)
 # Remove when b/63676296 is resolved.
 $(error Prebuilt bootimage is only supported for AB targets)
 endif
 $(eval $(call copy-one-file,$(BOARD_PREBUILT_BOOTIMAGE),$(INSTALLED_BOOTIMAGE_TARGET)))
-else
+else # BOARD_PREBUILT_BOOTIMAGE not defined
 INTERNAL_KERNEL_CMDLINE := $(strip $(BOARD_KERNEL_CMDLINE))
-# HACK: The top-level targets depend on the bootimage.  Not all targets
-# can produce a bootimage, though, and emulator targets need the ramdisk
-# instead.  Fake it out by calling the ramdisk the bootimage.
-# TODO: make the emulator use bootimages, and make mkbootimg accept
-#       kernel-less inputs.
-INSTALLED_BOOTIMAGE_TARGET := $(INSTALLED_RAMDISK_TARGET)
-endif
-endif
+INSTALLED_BOOTIMAGE_TARGET :=
+endif # BOARD_PREBUILT_BOOTIMAGE
+endif # TARGET_NO_KERNEL
 
 # -----------------------------------------------------------------
 # NOTICE files
@@ -849,7 +975,7 @@
 .PHONY: notice_files
 
 # Create the rule to combine the files into text and html/xml forms
-# $(1) - xml_excluded_vendor|xml_vendor|html
+# $(1) - xml_excluded_vendor_product|xml_vendor|xml_product|html
 # $(2) - Plain text output file
 # $(3) - HTML/XML output file
 # $(4) - File title
@@ -874,96 +1000,138 @@
 $(2) : $(3)
 $(3) : $(6) $(BUILD_SYSTEM)/Makefile build/make/tools/generate-notice-files.py
 	build/make/tools/generate-notice-files.py --text-output $(2) \
-		$(if $(filter $(1),xml_excluded_vendor),-e vendor --xml-output, \
-		  $(if $(filter $(1),xml_vendor),-i vendor --xml-output, \
-		    --html-output)) $(3) \
-		-t $$(PRIVATE_MESSAGE) -s $$(PRIVATE_DIR)/src
+	    $(if $(filter $(1),xml_excluded_extra_partitions),-e vendor -e product -e product_services --xml-output, \
+	      $(if $(filter $(1),xml_vendor),-i vendor --xml-output, \
+	        $(if $(filter $(1),xml_product),-i product --xml-output, \
+	          $(if $(filter $(1),xml_product_services),-i product_services --xml-output, \
+	            --html-output)))) $(3) \
+	    -t $$(PRIVATE_MESSAGE) -s $$(PRIVATE_DIR)/src
 notice_files: $(2) $(3)
 endef
 
+# Notice file logic isn't relevant for TARGET_BUILD_APPS
+ifndef TARGET_BUILD_APPS
+
 # TODO These intermediate NOTICE.txt/NOTICE.html files should go into
 # TARGET_OUT_NOTICE_FILES now that the notice files are gathered from
 # the src subdirectory.
-
 target_notice_file_txt := $(TARGET_OUT_INTERMEDIATES)/NOTICE.txt
-target_notice_file_html_or_xml := $(TARGET_OUT_INTERMEDIATES)/NOTICE.html
-target_notice_file_html_or_xml_gz := $(TARGET_OUT_INTERMEDIATES)/NOTICE.html.gz
-installed_notice_html_or_xml_gz := $(TARGET_OUT)/etc/NOTICE.html.gz
 tools_notice_file_txt := $(HOST_OUT_INTERMEDIATES)/NOTICE.txt
 tools_notice_file_html := $(HOST_OUT_INTERMEDIATES)/NOTICE.html
+kernel_notice_file := $(TARGET_OUT_NOTICE_FILES)/src/kernel.txt
+winpthreads_notice_file := $(TARGET_OUT_NOTICE_FILES)/src/winpthreads.txt
+pdk_fusion_notice_files := $(filter $(TARGET_OUT_NOTICE_FILES)/%, $(ALL_PDK_FUSION_FILES))
 
 # TODO(b/69865032): Make PRODUCT_NOTICE_SPLIT the default behavior.
-ifeq ($(PRODUCT_NOTICE_SPLIT),true)
-target_notice_file_html_or_xml := $(TARGET_OUT_INTERMEDIATES)/NOTICE.xml
-target_notice_file_html_or_xml_gz := $(TARGET_OUT_INTERMEDIATES)/NOTICE.xml.gz
+ifneq ($(PRODUCT_NOTICE_SPLIT),true)
+target_notice_file_html := $(TARGET_OUT_INTERMEDIATES)/NOTICE.html
+target_notice_file_html_gz := $(TARGET_OUT_INTERMEDIATES)/NOTICE.html.gz
+installed_notice_html_or_xml_gz := $(TARGET_OUT)/etc/NOTICE.html.gz
+$(eval $(call combine-notice-files, html, \
+	        $(target_notice_file_txt), \
+	        $(target_notice_file_html), \
+	        "Notices for files contained in the filesystem images in this directory:", \
+	        $(TARGET_OUT_NOTICE_FILES), \
+	        $(ALL_DEFAULT_INSTALLED_MODULES) $(kernel_notice_file) $(pdk_fusion_notice_files)))
+$(target_notice_file_html_gz): $(target_notice_file_html) | $(MINIGZIP)
+	$(hide) $(MINIGZIP) -9 < $< > $@
+$(installed_notice_html_or_xml_gz): $(target_notice_file_html_gz)
+	$(copy-file-to-target)
+else
+target_notice_file_xml := $(TARGET_OUT_INTERMEDIATES)/NOTICE.xml
+target_notice_file_xml_gz := $(TARGET_OUT_INTERMEDIATES)/NOTICE.xml.gz
 installed_notice_html_or_xml_gz := $(TARGET_OUT)/etc/NOTICE.xml.gz
 
 target_vendor_notice_file_txt := $(TARGET_OUT_INTERMEDIATES)/NOTICE_VENDOR.txt
 target_vendor_notice_file_xml := $(TARGET_OUT_INTERMEDIATES)/NOTICE_VENDOR.xml
 target_vendor_notice_file_xml_gz := $(TARGET_OUT_INTERMEDIATES)/NOTICE_VENDOR.xml.gz
 installed_vendor_notice_xml_gz := $(TARGET_OUT_VENDOR)/etc/NOTICE.xml.gz
-endif
 
-ifndef TARGET_BUILD_APPS
-kernel_notice_file := $(TARGET_OUT_NOTICE_FILES)/src/kernel.txt
-winpthreads_notice_file := $(TARGET_OUT_NOTICE_FILES)/src/winpthreads.txt
-pdk_fusion_notice_files := $(filter $(TARGET_OUT_NOTICE_FILES)/%, $(ALL_PDK_FUSION_FILES))
+target_product_notice_file_txt := $(TARGET_OUT_INTERMEDIATES)/NOTICE_PRODUCT.txt
+target_product_notice_file_xml := $(TARGET_OUT_INTERMEDIATES)/NOTICE_PRODUCT.xml
+target_product_notice_file_xml_gz := $(TARGET_OUT_INTERMEDIATES)/NOTICE_PRODUCT.xml.gz
+installed_product_notice_xml_gz := $(TARGET_OUT_PRODUCT)/etc/NOTICE.xml.gz
 
-ifdef target_vendor_notice_file_xml_gz
-$(eval $(call combine-notice-files, xml_excluded_vendor, \
-			$(target_notice_file_txt), \
-			$(target_notice_file_html_or_xml), \
-			"Notices for files contained in the filesystem images in this directory:", \
-			$(TARGET_OUT_NOTICE_FILES), \
-			$(ALL_DEFAULT_INSTALLED_MODULES) $(kernel_notice_file) $(pdk_fusion_notice_files)))
+target_product_services_notice_file_txt := $(TARGET_OUT_INTERMEDIATES)/NOTICE_PRODUCT_SERVICES.txt
+target_product_services_notice_file_xml := $(TARGET_OUT_INTERMEDIATES)/NOTICE_PRODUCT_SERVICES.xml
+target_product_services_notice_file_xml_gz := $(TARGET_OUT_INTERMEDIATES)/NOTICE_PRODUCT_SERVICES.xml.gz
+installed_product_services_notice_xml_gz := $(TARGET_OUT_PRODUCT_SERVICES)/etc/NOTICE.xml.gz
+
+# Notice files are copied to TARGET_OUT_NOTICE_FILES as a side-effect of their module
+# being built. A notice xml file must depend on all modules that could potentially
+# install a license file relevant to it.
+license_modules := $(ALL_DEFAULT_INSTALLED_MODULES) $(kernel_notice_file) $(pdk_fusion_notice_files)
+# Phonys/fakes don't have notice files (though their deps might)
+license_modules := $(filter-out $(TARGET_OUT_FAKE)/%,$(license_modules))
+license_modules_vendor := $(filter $(TARGET_OUT_VENDOR)/%,$(license_modules))
+license_modules_product := $(filter $(TARGET_OUT_PRODUCT)/%,$(license_modules))
+license_modules_product_services := $(filter $(TARGET_OUT_PRODUCT_SERVICES)/%,$(license_modules))
+license_modules_agg := $(license_modules_vendor) $(license_modules_product) $(license_modules_product_services)
+license_modules_rest := $(filter-out $(license_modules_agg),$(license_modules))
+
+$(eval $(call combine-notice-files, xml_excluded_extra_partitions, \
+	        $(target_notice_file_txt), \
+	        $(target_notice_file_xml), \
+	        "Notices for files contained in the filesystem images in this directory:", \
+	        $(TARGET_OUT_NOTICE_FILES), \
+	        $(license_modules_rest)))
 $(eval $(call combine-notice-files, xml_vendor, \
-			$(target_vendor_notice_file_txt), \
-			$(target_vendor_notice_file_xml), \
-			"Notices for files contained in the vendor filesystem image in this directory:", \
-			$(TARGET_OUT_NOTICE_FILES), \
-			$(target_notice_file_html_or_xml)))
-else
-$(eval $(call combine-notice-files, html, \
-			$(target_notice_file_txt), \
-			$(target_notice_file_html_or_xml), \
-			"Notices for files contained in the filesystem images in this directory:", \
-			$(TARGET_OUT_NOTICE_FILES), \
-			$(ALL_DEFAULT_INSTALLED_MODULES) $(kernel_notice_file) $(pdk_fusion_notice_files)))
-endif
+	        $(target_vendor_notice_file_txt), \
+	        $(target_vendor_notice_file_xml), \
+	        "Notices for files contained in the vendor filesystem image in this directory:", \
+	        $(TARGET_OUT_NOTICE_FILES), \
+	        $(license_modules_vendor)))
+$(eval $(call combine-notice-files, xml_product, \
+	        $(target_product_notice_file_txt), \
+	        $(target_product_notice_file_xml), \
+	        "Notices for files contained in the product filesystem image in this directory:", \
+	        $(TARGET_OUT_NOTICE_FILES), \
+	        $(license_modules_product)))
+$(eval $(call combine-notice-files, xml_product_services, \
+	        $(target_product_services_notice_file_txt), \
+	        $(target_product_services_notice_file_xml), \
+	        "Notices for files contained in the product_services filesystem image in this directory:", \
+	        $(TARGET_OUT_NOTICE_FILES), \
+	        $(license_modules_product_services)))
 
-$(eval $(call combine-notice-files, html, \
-			$(tools_notice_file_txt), \
-			$(tools_notice_file_html), \
-			"Notices for files contained in the tools directory:", \
-			$(HOST_OUT_NOTICE_FILES), \
-			$(ALL_DEFAULT_INSTALLED_MODULES) \
-			$(winpthreads_notice_file)))
-
-# Install the html file at /system/etc/NOTICE.html.gz.
-# This is not ideal, but this is very late in the game, after a lot of
-# the module processing has already been done -- in fact, we used the
-# fact that all that has been done to get the list of modules that we
-# need notice files for.
-$(target_notice_file_html_or_xml_gz): $(target_notice_file_html_or_xml) | $(MINIGZIP)
+$(target_notice_file_xml_gz): $(target_notice_file_xml) | $(MINIGZIP)
 	$(hide) $(MINIGZIP) -9 < $< > $@
-$(installed_notice_html_or_xml_gz): $(target_notice_file_html_or_xml_gz)
-	$(copy-file-to-target)
-
-ifdef target_vendor_notice_file_xml_gz
-# Install the vendor html file at /vendor/etc/NOTICE.xml.gz.
 $(target_vendor_notice_file_xml_gz): $(target_vendor_notice_file_xml) | $(MINIGZIP)
 	$(hide) $(MINIGZIP) -9 < $< > $@
+$(target_product_notice_file_xml_gz): $(target_product_notice_file_xml) | $(MINIGZIP)
+	$(hide) $(MINIGZIP) -9 < $< > $@
+$(target_product_services_notice_file_xml_gz): $(target_product_services_notice_file_xml) | $(MINIGZIP)
+	$(hide) $(MINIGZIP) -9 < $< > $@
+$(installed_notice_html_or_xml_gz): $(target_notice_file_xml_gz)
+	$(copy-file-to-target)
 $(installed_vendor_notice_xml_gz): $(target_vendor_notice_file_xml_gz)
 	$(copy-file-to-target)
-endif
+$(installed_product_notice_xml_gz): $(target_product_notice_file_xml_gz)
+	$(copy-file-to-target)
+$(installed_product_services_notice_xml_gz): $(target_product_services_notice_file_xml_gz)
+	$(copy-file-to-target)
 
 # if we've been run my mm, mmm, etc, don't reinstall this every time
 ifeq ($(ONE_SHOT_MAKEFILE),)
   ALL_DEFAULT_INSTALLED_MODULES += $(installed_notice_html_or_xml_gz)
-  ifdef target_vendor_notice_file_xml_gz
-    ALL_DEFAULT_INSTALLED_MODULES += $(installed_vendor_notice_xml_gz)
-  endif
+  ALL_DEFAULT_INSTALLED_MODULES += $(installed_vendor_notice_xml_gz)
+  ALL_DEFAULT_INSTALLED_MODULES += $(installed_product_notice_xml_gz)
+  ALL_DEFAULT_INSTALLED_MODULES += $(installed_product_services_notice_xml_gz)
 endif
+endif # PRODUCT_NOTICE_SPLIT
+
+ifeq ($(ONE_SHOT_MAKEFILE),)
+  ALL_DEFAULT_INSTALLED_MODULES += $(installed_notice_html_or_xml_gz)
+endif
+
+$(eval $(call combine-notice-files, html, \
+	        $(tools_notice_file_txt), \
+	        $(tools_notice_file_html), \
+	        "Notices for files contained in the tools directory:", \
+	        $(HOST_OUT_NOTICE_FILES), \
+	        $(ALL_DEFAULT_INSTALLED_MODULES) \
+	        $(winpthreads_notice_file)))
+
 endif  # TARGET_BUILD_APPS
 
 # The kernel isn't really a module, so to get its module file in there, we
@@ -990,12 +1158,12 @@
 # This rule adds to ALL_DEFAULT_INSTALLED_MODULES, so it needs to come
 # before the rules that use that variable to build the image.
 ALL_DEFAULT_INSTALLED_MODULES += $(TARGET_OUT_ETC)/security/otacerts.zip
-$(TARGET_OUT_ETC)/security/otacerts.zip: KEY_CERT_PAIR := $(DEFAULT_KEY_CERT_PAIR)
-$(TARGET_OUT_ETC)/security/otacerts.zip: $(addsuffix .x509.pem,$(DEFAULT_KEY_CERT_PAIR)) | $(ZIPTIME)
+$(TARGET_OUT_ETC)/security/otacerts.zip: PRIVATE_CERT := $(DEFAULT_KEY_CERT_PAIR).x509.pem
+$(TARGET_OUT_ETC)/security/otacerts.zip: $(SOONG_ZIP)
+$(TARGET_OUT_ETC)/security/otacerts.zip: $(DEFAULT_KEY_CERT_PAIR).x509.pem
 	$(hide) rm -f $@
 	$(hide) mkdir -p $(dir $@)
-	$(hide) zip -qjX $@ $<
-	$(remove-timestamps-from-package)
+	$(hide) $(SOONG_ZIP) -o $@ -C $(dir $(PRIVATE_CERT)) -f $(PRIVATE_CERT)
 
 # Carry the public key for update_engine if it's a non-IoT target that
 # uses the AB updater. We use the same key as otacerts but in RSA public key
@@ -1003,13 +1171,15 @@
 ifeq ($(AB_OTA_UPDATER),true)
 ifneq ($(PRODUCT_IOT),true)
 ALL_DEFAULT_INSTALLED_MODULES += $(TARGET_OUT_ETC)/update_engine/update-payload-key.pub.pem
-$(TARGET_OUT_ETC)/update_engine/update-payload-key.pub.pem: $(addsuffix .x509.pem,$(DEFAULT_KEY_CERT_PAIR))
+$(TARGET_OUT_ETC)/update_engine/update-payload-key.pub.pem: $(DEFAULT_KEY_CERT_PAIR).x509.pem
 	$(hide) rm -f $@
 	$(hide) mkdir -p $(dir $@)
 	$(hide) openssl x509 -pubkey -noout -in $< > $@
 
-ALL_DEFAULT_INSTALLED_MODULES += $(TARGET_RECOVERY_ROOT_OUT)/etc/update_engine/update-payload-key.pub.pem
-$(TARGET_RECOVERY_ROOT_OUT)/etc/update_engine/update-payload-key.pub.pem: $(TARGET_OUT_ETC)/update_engine/update-payload-key.pub.pem
+ALL_DEFAULT_INSTALLED_MODULES += \
+    $(TARGET_RECOVERY_ROOT_OUT)/system/etc/update_engine/update-payload-key.pub.pem
+$(TARGET_RECOVERY_ROOT_OUT)/system/etc/update_engine/update-payload-key.pub.pem: \
+	    $(TARGET_OUT_ETC)/update_engine/update-payload-key.pub.pem
 	$(hide) cp -f $< $@
 endif
 endif
@@ -1051,7 +1221,7 @@
 
 ifeq ($(INTERNAL_USERIMAGES_USE_EXT),true)
 INTERNAL_USERIMAGES_DEPS := $(SIMG2IMG)
-INTERNAL_USERIMAGES_DEPS += $(MKEXTUSERIMG) $(MAKE_EXT4FS) $(E2FSCK)
+INTERNAL_USERIMAGES_DEPS += $(MKEXTUSERIMG) $(MAKE_EXT4FS) $(E2FSCK) $(TUNE2FS)
 ifeq ($(TARGET_USERIMAGES_USE_F2FS),true)
 INTERNAL_USERIMAGES_DEPS += $(MKF2FSUSERIMG) $(MAKE_F2FS)
 endif
@@ -1064,14 +1234,14 @@
 ifneq (true,$(TARGET_USERIMAGES_SPARSE_SQUASHFS_DISABLED))
   INTERNAL_USERIMAGES_SPARSE_SQUASHFS_FLAG := -s
 endif
-ifneq ($(filter $(BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE) $(BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE) $(BOARD_SYSTEMIMAGE_FILE_SYSTEM_TYPE),squashfs),)
+ifneq ($(filter $(BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE) $(BOARD_PRODUCT_SERVICESIMAGE_FILE_SYSTEM_TYPE) $(BOARD_ODMIMAGE_FILE_SYSTEM_TYPE) $(BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE) $(BOARD_SYSTEMIMAGE_FILE_SYSTEM_TYPE),squashfs),)
 INTERNAL_USERIMAGES_DEPS += $(MAKE_SQUASHFS) $(MKSQUASHFSUSERIMG) $(IMG2SIMG)
 endif
 
 INTERNAL_USERIMAGES_BINARY_PATHS := $(sort $(dir $(INTERNAL_USERIMAGES_DEPS)))
 
 ifeq (true,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY))
-INTERNAL_USERIMAGES_DEPS += $(BUILD_VERITY_TREE) $(APPEND2SIMG) $(VERITY_SIGNER)
+INTERNAL_USERIMAGES_DEPS += $(BUILD_VERITY_METADATA) $(BUILD_VERITY_TREE) $(APPEND2SIMG) $(VERITY_SIGNER)
 ifeq (true,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY_FEC))
 INTERNAL_USERIMAGES_DEPS += $(FEC)
 endif
@@ -1086,55 +1256,108 @@
 INTERNAL_USERIMAGES_DEPS += $(MKE2FS_CONF)
 endif
 
+ifeq (true,$(PRODUCT_USE_DYNAMIC_PARTITIONS))
+
+ifeq ($(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY),true)
+  $(error vboot 1.0 doesn't support logical partition)
+endif
+
+# TODO(b/80195851): Should not define BOARD_AVB_SYSTEM_KEY_PATH without
+# BOARD_AVB_SYSTEM_DETACHED_VBMETA.
+
+endif # PRODUCT_USE_DYNAMIC_PARTITIONS
+
 # $(1): the path of the output dictionary file
-# $(2): additional "key=value" pairs to append to the dictionary file.
-define generate-userimage-prop-dictionary
+# $(2): a subset of "system vendor cache userdata product product_services oem odm"
+# $(3): additional "key=value" pairs to append to the dictionary file.
+define generate-image-prop-dictionary
+$(if $(filter $(2),system),\
+    $(if $(BOARD_SYSTEMIMAGE_PARTITION_SIZE),$(hide) echo "system_size=$(BOARD_SYSTEMIMAGE_PARTITION_SIZE)" >> $(1))
+    $(if $(BOARD_SYSTEMIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "system_fs_type=$(BOARD_SYSTEMIMAGE_FILE_SYSTEM_TYPE)" >> $(1))
+    $(if $(BOARD_SYSTEMIMAGE_EXTFS_INODE_COUNT),$(hide) echo "system_extfs_inode_count=$(BOARD_SYSTEMIMAGE_EXTFS_INODE_COUNT)" >> $(1))
+    $(if $(BOARD_SYSTEMIMAGE_EXTFS_RSV_PCT),$(hide) echo "system_extfs_rsv_pct=$(BOARD_SYSTEMIMAGE_EXTFS_RSV_PCT)" >> $(1))
+    $(if $(BOARD_SYSTEMIMAGE_JOURNAL_SIZE),$(hide) echo "system_journal_size=$(BOARD_SYSTEMIMAGE_JOURNAL_SIZE)" >> $(1))
+    $(if $(BOARD_SYSTEMIMAGE_SQUASHFS_COMPRESSOR),$(hide) echo "system_squashfs_compressor=$(BOARD_SYSTEMIMAGE_SQUASHFS_COMPRESSOR)" >> $(1))
+    $(if $(BOARD_SYSTEMIMAGE_SQUASHFS_COMPRESSOR_OPT),$(hide) echo "system_squashfs_compressor_opt=$(BOARD_SYSTEMIMAGE_SQUASHFS_COMPRESSOR_OPT)" >> $(1))
+    $(if $(BOARD_SYSTEMIMAGE_SQUASHFS_BLOCK_SIZE),$(hide) echo "system_squashfs_block_size=$(BOARD_SYSTEMIMAGE_SQUASHFS_BLOCK_SIZE)" >> $(1))
+    $(if $(BOARD_SYSTEMIMAGE_SQUASHFS_DISABLE_4K_ALIGN),$(hide) echo "system_squashfs_disable_4k_align=$(BOARD_SYSTEMIMAGE_SQUASHFS_DISABLE_4K_ALIGN)" >> $(1))
+    $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_BASE_FS_PATH),$(hide) echo "system_base_fs_file=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_BASE_FS_PATH)" >> $(1))
+    $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_HEADROOM),$(hide) echo "system_headroom=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_HEADROOM)" >> $(1))
+    $(if $(BOARD_SYSTEMIMAGE_PARTITION_RESERVED_SIZE),$(hide) echo "system_reserved_size=$(BOARD_SYSTEMIMAGE_PARTITION_RESERVED_SIZE)" >> $(1))
+)
+$(if $(filter $(2),userdata),\
+    $(if $(BOARD_USERDATAIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "userdata_fs_type=$(BOARD_USERDATAIMAGE_FILE_SYSTEM_TYPE)" >> $(1))
+    $(if $(BOARD_USERDATAIMAGE_PARTITION_SIZE),$(hide) echo "userdata_size=$(BOARD_USERDATAIMAGE_PARTITION_SIZE)" >> $(1))
+)
+$(if $(filter $(2),cache),\
+    $(if $(BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "cache_fs_type=$(BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE)" >> $(1))
+    $(if $(BOARD_CACHEIMAGE_PARTITION_SIZE),$(hide) echo "cache_size=$(BOARD_CACHEIMAGE_PARTITION_SIZE)" >> $(1))
+)
+$(if $(filter $(2),vendor),\
+    $(if $(BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "vendor_fs_type=$(BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE)" >> $(1))
+    $(if $(BOARD_VENDORIMAGE_EXTFS_INODE_COUNT),$(hide) echo "vendor_extfs_inode_count=$(BOARD_VENDORIMAGE_EXTFS_INODE_COUNT)" >> $(1))
+    $(if $(BOARD_VENDORIMAGE_EXTFS_RSV_PCT),$(hide) echo "vendor_extfs_rsv_pct=$(BOARD_VENDORIMAGE_EXTFS_RSV_PCT)" >> $(1))
+    $(if $(BOARD_VENDORIMAGE_PARTITION_SIZE),$(hide) echo "vendor_size=$(BOARD_VENDORIMAGE_PARTITION_SIZE)" >> $(1))
+    $(if $(BOARD_VENDORIMAGE_JOURNAL_SIZE),$(hide) echo "vendor_journal_size=$(BOARD_VENDORIMAGE_JOURNAL_SIZE)" >> $(1))
+    $(if $(BOARD_VENDORIMAGE_SQUASHFS_COMPRESSOR),$(hide) echo "vendor_squashfs_compressor=$(BOARD_VENDORIMAGE_SQUASHFS_COMPRESSOR)" >> $(1))
+    $(if $(BOARD_VENDORIMAGE_SQUASHFS_COMPRESSOR_OPT),$(hide) echo "vendor_squashfs_compressor_opt=$(BOARD_VENDORIMAGE_SQUASHFS_COMPRESSOR_OPT)" >> $(1))
+    $(if $(BOARD_VENDORIMAGE_SQUASHFS_BLOCK_SIZE),$(hide) echo "vendor_squashfs_block_size=$(BOARD_VENDORIMAGE_SQUASHFS_BLOCK_SIZE)" >> $(1))
+    $(if $(BOARD_VENDORIMAGE_SQUASHFS_DISABLE_4K_ALIGN),$(hide) echo "vendor_squashfs_disable_4k_align=$(BOARD_VENDORIMAGE_SQUASHFS_DISABLE_4K_ALIGN)" >> $(1))
+    $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VENDOR_BASE_FS_PATH),$(hide) echo "vendor_base_fs_file=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VENDOR_BASE_FS_PATH)" >> $(1))
+    $(if $(BOARD_VENDORIMAGE_PARTITION_RESERVED_SIZE),$(hide) echo "vendor_reserved_size=$(BOARD_VENDORIMAGE_PARTITION_RESERVED_SIZE)" >> $(1))
+)
+$(if $(filter $(2),product),\
+    $(if $(BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "product_fs_type=$(BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE)" >> $(1))
+    $(if $(BOARD_PRODUCTIMAGE_EXTFS_INODE_COUNT),$(hide) echo "product_extfs_inode_count=$(BOARD_PRODUCTIMAGE_EXTFS_INODE_COUNT)" >> $(1))
+    $(if $(BOARD_PRODUCTIMAGE_EXTFS_RSV_PCT),$(hide) echo "product_extfs_rsv_pct=$(BOARD_PRODUCTIMAGE_EXTFS_RSV_PCT)" >> $(1))
+    $(if $(BOARD_PRODUCTIMAGE_PARTITION_SIZE),$(hide) echo "product_size=$(BOARD_PRODUCTIMAGE_PARTITION_SIZE)" >> $(1))
+    $(if $(BOARD_PRODUCTIMAGE_JOURNAL_SIZE),$(hide) echo "product_journal_size=$(BOARD_PRODUCTIMAGE_JOURNAL_SIZE)" >> $(1))
+    $(if $(BOARD_PRODUCTIMAGE_SQUASHFS_COMPRESSOR),$(hide) echo "product_squashfs_compressor=$(BOARD_PRODUCTIMAGE_SQUASHFS_COMPRESSOR)" >> $(1))
+    $(if $(BOARD_PRODUCTIMAGE_SQUASHFS_COMPRESSOR_OPT),$(hide) echo "product_squashfs_compressor_opt=$(BOARD_PRODUCTIMAGE_SQUASHFS_COMPRESSOR_OPT)" >> $(1))
+    $(if $(BOARD_PRODUCTIMAGE_SQUASHFS_BLOCK_SIZE),$(hide) echo "product_squashfs_block_size=$(BOARD_PRODUCTIMAGE_SQUASHFS_BLOCK_SIZE)" >> $(1))
+    $(if $(BOARD_PRODUCTIMAGE_SQUASHFS_DISABLE_4K_ALIGN),$(hide) echo "product_squashfs_disable_4k_align=$(BOARD_PRODUCTIMAGE_SQUASHFS_DISABLE_4K_ALIGN)" >> $(1))
+    $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PRODUCT_BASE_FS_PATH),$(hide) echo "product_base_fs_file=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PRODUCT_BASE_FS_PATH)" >> $(1))
+    $(if $(BOARD_PRODUCTIMAGE_PARTITION_RESERVED_SIZE),$(hide) echo "product_reserved_size=$(BOARD_PRODUCTIMAGE_PARTITION_RESERVED_SIZE)" >> $(1))
+)
+$(if $(filter $(2),product_services),\
+    $(if $(BOARD_PRODUCT_SERVICESIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "product_services_fs_type=$(BOARD_PRODUCT_SERVICESIMAGE_FILE_SYSTEM_TYPE)" >> $(1))
+    $(if $(BOARD_PRODUCT_SERVICESIMAGE_EXTFS_INODE_COUNT),$(hide) echo "product_services_extfs_inode_count=$(BOARD_PRODUCT_SERVICESIMAGE_EXTFS_INODE_COUNT)" >> $(1))
+    $(if $(BOARD_PRODUCT_SERVICESIMAGE_EXTFS_RSV_PCT),$(hide) echo "product_services_extfs_rsv_pct=$(BOARD_PRODUCT_SERVICESIMAGE_EXTFS_RSV_PCT)" >> $(1))
+    $(if $(BOARD_PRODUCT_SERVICESIMAGE_PARTITION_SIZE),$(hide) echo "product_services_size=$(BOARD_PRODUCT_SERVICESIMAGE_PARTITION_SIZE)" >> $(1))
+    $(if $(BOARD_PRODUCT_SERVICESIMAGE_JOURNAL_SIZE),$(hide) echo "product_services_journal_size=$(BOARD_PRODUCT_SERVICESIMAGE_JOURNAL_SIZE)" >> $(1))
+    $(if $(BOARD_PRODUCT_SERVICESIMAGE_SQUASHFS_COMPRESSOR),$(hide) echo "product_services_squashfs_compressor=$(BOARD_PRODUCT_SERVICESIMAGE_SQUASHFS_COMPRESSOR)" >> $(1))
+    $(if $(BOARD_PRODUCT_SERVICESIMAGE_SQUASHFS_COMPRESSOR_OPT),$(hide) echo "product_services_squashfs_compressor_opt=$(BOARD_PRODUCT_SERVICESIMAGE_SQUASHFS_COMPRESSOR_OPT)" >> $(1))
+    $(if $(BOARD_PRODUCT_SERVICESIMAGE_SQUASHFS_BLOCK_SIZE),$(hide) echo "product_services_squashfs_block_size=$(BOARD_PRODUCT_SERVICESIMAGE_SQUASHFS_BLOCK_SIZE)" >> $(1))
+    $(if $(BOARD_PRODUCT_SERVICESIMAGE_SQUASHFS_DISABLE_4K_ALIGN),$(hide) echo "product_services_squashfs_disable_4k_align=$(BOARD_PRODUCT_SERVICESIMAGE_SQUASHFS_DISABLE_4K_ALIGN)" >> $(1))
+    $(if $(BOARD_PRODUCT_SERVICESIMAGE_PARTITION_RESERVED_SIZE),$(hide) echo "product_services_reserved_size=$(BOARD_PRODUCT_SERVICESIMAGE_PARTITION_RESERVED_SIZE)" >> $(1))
+)
+$(if $(filter $(2),odm),\
+    $(if $(BOARD_ODMIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "odm_fs_type=$(BOARD_ODMIMAGE_FILE_SYSTEM_TYPE)" >> $(1))
+    $(if $(BOARD_ODMIMAGE_EXTFS_INODE_COUNT),$(hide) echo "odm_extfs_inode_count=$(BOARD_ODMIMAGE_EXTFS_INODE_COUNT)" >> $(1))
+    $(if $(BOARD_ODMIMAGE_EXTFS_RSV_PCT),$(hide) echo "odm_extfs_rsv_pct=$(BOARD_ODMIMAGE_EXTFS_RSV_PCT)" >> $(1))
+    $(if $(BOARD_ODMIMAGE_PARTITION_SIZE),$(hide) echo "odm_size=$(BOARD_ODMIMAGE_PARTITION_SIZE)" >> $(1))
+    $(if $(BOARD_ODMIMAGE_JOURNAL_SIZE),$(hide) echo "odm_journal_size=$(BOARD_ODMIMAGE_JOURNAL_SIZE)" >> $(1))
+    $(if $(BOARD_ODMIMAGE_SQUASHFS_COMPRESSOR),$(hide) echo "odm_squashfs_compressor=$(BOARD_ODMIMAGE_SQUASHFS_COMPRESSOR)" >> $(1))
+    $(if $(BOARD_ODMIMAGE_SQUASHFS_COMPRESSOR_OPT),$(hide) echo "odm_squashfs_compressor_opt=$(BOARD_ODMIMAGE_SQUASHFS_COMPRESSOR_OPT)" >> $(1))
+    $(if $(BOARD_ODMIMAGE_SQUASHFS_BLOCK_SIZE),$(hide) echo "odm_squashfs_block_size=$(BOARD_ODMIMAGE_SQUASHFS_BLOCK_SIZE)" >> $(1))
+    $(if $(BOARD_ODMIMAGE_SQUASHFS_DISABLE_4K_ALIGN),$(hide) echo "odm_squashfs_disable_4k_align=$(BOARD_ODMIMAGE_SQUASHFS_DISABLE_4K_ALIGN)" >> $(1))
+    $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_ODM_BASE_FS_PATH),$(hide) echo "odm_base_fs_file=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_ODM_BASE_FS_PATH)" >> $(1))
+    $(if $(BOARD_ODMIMAGE_PARTITION_RESERVED_SIZE),$(hide) echo "odm_reserved_size=$(BOARD_ODMIMAGE_PARTITION_RESERVED_SIZE)" >> $(1))
+)
+$(if $(filter $(2),oem),\
+    $(if $(BOARD_OEMIMAGE_PARTITION_SIZE),$(hide) echo "oem_size=$(BOARD_OEMIMAGE_PARTITION_SIZE)" >> $(1))
+    $(if $(BOARD_OEMIMAGE_JOURNAL_SIZE),$(hide) echo "oem_journal_size=$(BOARD_OEMIMAGE_JOURNAL_SIZE)" >> $(1))
+    $(if $(BOARD_OEMIMAGE_EXTFS_INODE_COUNT),$(hide) echo "oem_extfs_inode_count=$(BOARD_OEMIMAGE_EXTFS_INODE_COUNT)" >> $(1))
+    $(if $(BOARD_OEMIMAGE_EXTFS_RSV_PCT),$(hide) echo "oem_extfs_rsv_pct=$(BOARD_OEMIMAGE_EXTFS_RSV_PCT)" >> $(1))
+)
 $(hide) echo "ext_mkuserimg=$(notdir $(MKEXTUSERIMG))" >> $(1)
+
 $(if $(INTERNAL_USERIMAGES_EXT_VARIANT),$(hide) echo "fs_type=$(INTERNAL_USERIMAGES_EXT_VARIANT)" >> $(1))
-$(if $(BOARD_SYSTEMIMAGE_PARTITION_SIZE),$(hide) echo "system_size=$(BOARD_SYSTEMIMAGE_PARTITION_SIZE)" >> $(1))
-$(if $(BOARD_SYSTEMIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "system_fs_type=$(BOARD_SYSTEMIMAGE_FILE_SYSTEM_TYPE)" >> $(1))
-$(if $(BOARD_SYSTEMIMAGE_EXTFS_INODE_COUNT),$(hide) echo "system_extfs_inode_count=$(BOARD_SYSTEMIMAGE_EXTFS_INODE_COUNT)" >> $(1))
-$(if $(BOARD_SYSTEMIMAGE_EXTFS_RSV_PCT),$(hide) echo "system_extfs_rsv_pct=$(BOARD_SYSTEMIMAGE_EXTFS_RSV_PCT)" >> $(1))
-$(if $(BOARD_SYSTEMIMAGE_JOURNAL_SIZE),$(hide) echo "system_journal_size=$(BOARD_SYSTEMIMAGE_JOURNAL_SIZE)" >> $(1))
-$(if $(BOARD_EXT4_SHARE_DUP_BLOCKS),$(hide) echo "ext4_share_dup_blocks=$(BOARD_EXT4_SHARE_DUP_BLOCKS)" >> $(1))
-$(if $(BOARD_SYSTEMIMAGE_SQUASHFS_COMPRESSOR),$(hide) echo "system_squashfs_compressor=$(BOARD_SYSTEMIMAGE_SQUASHFS_COMPRESSOR)" >> $(1))
-$(if $(BOARD_SYSTEMIMAGE_SQUASHFS_COMPRESSOR_OPT),$(hide) echo "system_squashfs_compressor_opt=$(BOARD_SYSTEMIMAGE_SQUASHFS_COMPRESSOR_OPT)" >> $(1))
-$(if $(BOARD_SYSTEMIMAGE_SQUASHFS_BLOCK_SIZE),$(hide) echo "system_squashfs_block_size=$(BOARD_SYSTEMIMAGE_SQUASHFS_BLOCK_SIZE)" >> $(1))
-$(if $(BOARD_SYSTEMIMAGE_SQUASHFS_DISABLE_4K_ALIGN),$(hide) echo "system_squashfs_disable_4k_align=$(BOARD_SYSTEMIMAGE_SQUASHFS_DISABLE_4K_ALIGN)" >> $(1))
-$(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_BASE_FS_PATH),$(hide) echo "system_base_fs_file=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_BASE_FS_PATH)" >> $(1))
-$(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_HEADROOM),$(hide) echo "system_headroom=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_HEADROOM)" >> $(1))
-$(if $(BOARD_USERDATAIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "userdata_fs_type=$(BOARD_USERDATAIMAGE_FILE_SYSTEM_TYPE)" >> $(1))
-$(if $(BOARD_USERDATAIMAGE_PARTITION_SIZE),$(hide) echo "userdata_size=$(BOARD_USERDATAIMAGE_PARTITION_SIZE)" >> $(1))
-$(if $(BOARD_FLASH_LOGICAL_BLOCK_SIZE), $(hide) echo "flash_logical_block_size=$(BOARD_FLASH_LOGICAL_BLOCK_SIZE)" >> $(1))
-$(if $(BOARD_FLASH_ERASE_BLOCK_SIZE), $(hide) echo "flash_erase_block_size=$(BOARD_FLASH_ERASE_BLOCK_SIZE)" >> $(1))
-$(if $(BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "cache_fs_type=$(BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE)" >> $(1))
-$(if $(BOARD_CACHEIMAGE_PARTITION_SIZE),$(hide) echo "cache_size=$(BOARD_CACHEIMAGE_PARTITION_SIZE)" >> $(1))
-$(if $(BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "vendor_fs_type=$(BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE)" >> $(1))
-$(if $(BOARD_VENDORIMAGE_EXTFS_INODE_COUNT),$(hide) echo "vendor_extfs_inode_count=$(BOARD_VENDORIMAGE_EXTFS_INODE_COUNT)" >> $(1))
-$(if $(BOARD_VENDORIMAGE_EXTFS_RSV_PCT),$(hide) echo "vendor_extfs_rsv_pct=$(BOARD_VENDORIMAGE_EXTFS_RSV_PCT)" >> $(1))
-$(if $(BOARD_VENDORIMAGE_PARTITION_SIZE),$(hide) echo "vendor_size=$(BOARD_VENDORIMAGE_PARTITION_SIZE)" >> $(1))
-$(if $(BOARD_VENDORIMAGE_JOURNAL_SIZE),$(hide) echo "vendor_journal_size=$(BOARD_VENDORIMAGE_JOURNAL_SIZE)" >> $(1))
-$(if $(BOARD_VENDORIMAGE_SQUASHFS_COMPRESSOR),$(hide) echo "vendor_squashfs_compressor=$(BOARD_VENDORIMAGE_SQUASHFS_COMPRESSOR)" >> $(1))
-$(if $(BOARD_VENDORIMAGE_SQUASHFS_COMPRESSOR_OPT),$(hide) echo "vendor_squashfs_compressor_opt=$(BOARD_VENDORIMAGE_SQUASHFS_COMPRESSOR_OPT)" >> $(1))
-$(if $(BOARD_VENDORIMAGE_SQUASHFS_BLOCK_SIZE),$(hide) echo "vendor_squashfs_block_size=$(BOARD_VENDORIMAGE_SQUASHFS_BLOCK_SIZE)" >> $(1))
-$(if $(BOARD_VENDORIMAGE_SQUASHFS_DISABLE_4K_ALIGN),$(hide) echo "vendor_squashfs_disable_4k_align=$(BOARD_VENDORIMAGE_SQUASHFS_DISABLE_4K_ALIGN)" >> $(1))
-$(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VENDOR_BASE_FS_PATH),$(hide) echo "vendor_base_fs_file=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VENDOR_BASE_FS_PATH)" >> $(1))
-$(if $(BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "product_fs_type=$(BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE)" >> $(1))
-$(if $(BOARD_PRODUCTIMAGE_EXTFS_INODE_COUNT),$(hide) echo "product_extfs_inode_count=$(BOARD_PRODUCTIMAGE_EXTFS_INODE_COUNT)" >> $(1))
-$(if $(BOARD_PRODUCTIMAGE_EXTFS_RSV_PCT),$(hide) echo "product_extfs_rsv_pct=$(BOARD_PRODUCTIMAGE_EXTFS_RSV_PCT)" >> $(1))
-$(if $(BOARD_PRODUCTIMAGE_PARTITION_SIZE),$(hide) echo "product_size=$(BOARD_PRODUCTIMAGE_PARTITION_SIZE)" >> $(1))
-$(if $(BOARD_PRODUCTIMAGE_JOURNAL_SIZE),$(hide) echo "product_journal_size=$(BOARD_PRODUCTIMAGE_JOURNAL_SIZE)" >> $(1))
-$(if $(BOARD_PRODUCTIMAGE_SQUASHFS_COMPRESSOR),$(hide) echo "product_squashfs_compressor=$(BOARD_PRODUCTIMAGE_SQUASHFS_COMPRESSOR)" >> $(1))
-$(if $(BOARD_PRODUCTIMAGE_SQUASHFS_COMPRESSOR_OPT),$(hide) echo "product_squashfs_compressor_opt=$(BOARD_PRODUCTIMAGE_SQUASHFS_COMPRESSOR_OPT)" >> $(1))
-$(if $(BOARD_PRODUCTIMAGE_SQUASHFS_BLOCK_SIZE),$(hide) echo "product_squashfs_block_size=$(BOARD_PRODUCTIMAGE_SQUASHFS_BLOCK_SIZE)" >> $(1))
-$(if $(BOARD_PRODUCTIMAGE_SQUASHFS_DISABLE_4K_ALIGN),$(hide) echo "product_squashfs_disable_4k_align=$(BOARD_PRODUCTIMAGE_SQUASHFS_DISABLE_4K_ALIGN)" >> $(1))
-$(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PRODUCT_BASE_FS_PATH),$(hide) echo "product_base_fs_file=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PRODUCT_BASE_FS_PATH)" >> $(1))
-$(if $(BOARD_OEMIMAGE_PARTITION_SIZE),$(hide) echo "oem_size=$(BOARD_OEMIMAGE_PARTITION_SIZE)" >> $(1))
-$(if $(BOARD_OEMIMAGE_JOURNAL_SIZE),$(hide) echo "oem_journal_size=$(BOARD_OEMIMAGE_JOURNAL_SIZE)" >> $(1))
-$(if $(BOARD_OEMIMAGE_EXTFS_INODE_COUNT),$(hide) echo "oem_extfs_inode_count=$(BOARD_OEMIMAGE_EXTFS_INODE_COUNT)" >> $(1))
-$(if $(BOARD_OEMIMAGE_EXTFS_RSV_PCT),$(hide) echo "oem_extfs_rsv_pct=$(BOARD_OEMIMAGE_EXTFS_RSV_PCT)" >> $(1))
 $(if $(INTERNAL_USERIMAGES_SPARSE_EXT_FLAG),$(hide) echo "extfs_sparse_flag=$(INTERNAL_USERIMAGES_SPARSE_EXT_FLAG)" >> $(1))
 $(if $(INTERNAL_USERIMAGES_SPARSE_SQUASHFS_FLAG),$(hide) echo "squashfs_sparse_flag=$(INTERNAL_USERIMAGES_SPARSE_SQUASHFS_FLAG)" >> $(1))
+$(if $(BOARD_EXT4_SHARE_DUP_BLOCKS),$(hide) echo "ext4_share_dup_blocks=$(BOARD_EXT4_SHARE_DUP_BLOCKS)" >> $(1))
+$(if $(BOARD_FLASH_LOGICAL_BLOCK_SIZE), $(hide) echo "flash_logical_block_size=$(BOARD_FLASH_LOGICAL_BLOCK_SIZE)" >> $(1))
+$(if $(BOARD_FLASH_ERASE_BLOCK_SIZE), $(hide) echo "flash_erase_block_size=$(BOARD_FLASH_ERASE_BLOCK_SIZE)" >> $(1))
 $(hide) echo "selinux_fc=$(SELINUX_FC)" >> $(1)
 $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_BOOT_SIGNER),$(hide) echo "boot_signer=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_BOOT_SIGNER)" >> $(1))
 $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY),$(hide) echo "verity=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY)" >> $(1))
@@ -1145,6 +1368,7 @@
 $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_VERITY_PARTITION),$(hide) echo "system_verity_block_device=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_VERITY_PARTITION)" >> $(1))
 $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VENDOR_VERITY_PARTITION),$(hide) echo "vendor_verity_block_device=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VENDOR_VERITY_PARTITION)" >> $(1))
 $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PRODUCT_VERITY_PARTITION),$(hide) echo "product_verity_block_device=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PRODUCT_VERITY_PARTITION)" >> $(1))
+$(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PRODUCT_SERVICES_VERITY_PARTITION),$(hide) echo "product_services_verity_block_device=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PRODUCT_SERVICES_VERITY_PARTITION)" >> $(1))
 $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VBOOT),$(hide) echo "vboot=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VBOOT)" >> $(1))
 $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VBOOT),$(hide) echo "vboot_key=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VBOOT_SIGNING_KEY)" >> $(1))
 $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VBOOT),$(hide) echo "vboot_subkey=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VBOOT_SIGNING_SUBKEY)" >> $(1))
@@ -1172,12 +1396,40 @@
         $(hide) echo "avb_product_key_path=$(BOARD_AVB_PRODUCT_KEY_PATH)" >> $(1)
         $(hide) echo "avb_product_algorithm=$(BOARD_AVB_PRODUCT_ALGORITHM)" >> $(1)
         $(hide) echo "avb_product_rollback_index_location=$(BOARD_AVB_PRODUCT_ROLLBACK_INDEX_LOCATION)" >> $(1)))
+$(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_product_services_hashtree_enable=$(BOARD_AVB_ENABLE)" >> $(1))
+$(if $(BOARD_AVB_ENABLE),\
+    $(hide) echo "avb_product_services_add_hashtree_footer_args=$(BOARD_AVB_PRODUCT_SERVICES_ADD_HASHTREE_FOOTER_ARGS)" >> $(1))
+$(if $(BOARD_AVB_ENABLE),\
+    $(if $(BOARD_AVB_PRODUCT_SERVICES_KEY_PATH),\
+        $(hide) echo "avb_product_services_key_path=$(BOARD_AVB_PRODUCT_SERVICES_KEY_PATH)" >> $(1)
+        $(hide) echo "avb_product_services_algorithm=$(BOARD_AVB_PRODUCT_SERVICES_ALGORITHM)" >> $(1)
+        $(hide) echo "avb_product_services_rollback_index_location=$(BOARD_AVB_PRODUCT_SERVICES_ROLLBACK_INDEX_LOCATION)" >> $(1)))
+$(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_odm_hashtree_enable=$(BOARD_AVB_ENABLE)" >> $(1))
+$(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_odm_add_hashtree_footer_args=$(BOARD_AVB_ODM_ADD_HASHTREE_FOOTER_ARGS)" >> $(1))
+$(if $(BOARD_AVB_ENABLE),\
+    $(if $(BOARD_AVB_ODM_KEY_PATH),\
+        $(hide) echo "avb_odm_key_path=$(BOARD_AVB_ODM_KEY_PATH)" >> $(1)
+        $(hide) echo "avb_odm_algorithm=$(BOARD_AVB_ODM_ALGORITHM)" >> $(1)
+        $(hide) echo "avb_odm_rollback_index_location=$(BOARD_AVB_ODM_ROLLBACK_INDEX_LOCATION)" >> $(1)))
 $(if $(filter true,$(BOARD_USES_RECOVERY_AS_BOOT)),\
     $(hide) echo "recovery_as_boot=true" >> $(1))
 $(if $(filter true,$(BOARD_BUILD_SYSTEM_ROOT_IMAGE)),\
-    $(hide) echo "system_root_image=true" >> $(1);\
-    echo "ramdisk_dir=$(TARGET_ROOT_OUT)" >> $(1))
-$(if $(2),$(hide) $(foreach kv,$(2),echo "$(kv)" >> $(1);))
+    $(hide) echo "system_root_image=true" >> $(1))
+$(hide) echo "root_dir=$(TARGET_ROOT_OUT)" >> $(1)
+$(if $(PRODUCT_USE_DYNAMIC_PARTITION_SIZE),$(hide) echo "use_dynamic_partition_size=true" >> $(1))
+$(if $(3),$(hide) $(foreach kv,$(3),echo "$(kv)" >> $(1);))
+endef
+
+# $(1): the path of the output dictionary file
+# $(2): additional "key=value" pairs to append to the dictionary file.
+define generate-userimage-prop-dictionary
+$(call generate-image-prop-dictionary,$(1),system vendor cache userdata product product_services oem odm,$(2))
+endef
+
+# $(1): the path of the input dictionary file, where each line has the format key=value
+# $(2): the key to look up
+define read-image-prop-dictionary
+$$(grep '$(2)=' $(1) | cut -f2- -d'=')
 endef
 
 # $(1): modules list
@@ -1206,6 +1458,27 @@
 INTERNAL_RECOVERYIMAGE_FILES := $(filter $(TARGET_RECOVERY_OUT)/%, \
     $(ALL_DEFAULT_INSTALLED_MODULES))
 
+INSTALLED_FILES_FILE_RECOVERY := $(PRODUCT_OUT)/installed-files-recovery.txt
+INSTALLED_FILES_JSON_RECOVERY := $(INSTALLED_FILES_FILE_RECOVERY:.txt=.json)
+
+# TODO(b/30414428): Can't depend on INTERNAL_RECOVERYIMAGE_FILES alone like other
+# INSTALLED_FILES_FILE_* rules. Because currently there're cp/rsync/rm commands in
+# build-recoveryimage-target, which would touch the files under TARGET_RECOVERY_OUT and race with
+# the call to FILELIST.
+ifeq ($(BOARD_USES_RECOVERY_AS_BOOT),true)
+$(INSTALLED_FILES_FILE_RECOVERY): $(INSTALLED_BOOTIMAGE_TARGET)
+else
+$(INSTALLED_FILES_FILE_RECOVERY): $(INSTALLED_RECOVERYIMAGE_TARGET)
+endif
+
+$(INSTALLED_FILES_FILE_RECOVERY): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_RECOVERY)
+$(INSTALLED_FILES_FILE_RECOVERY): $(INTERNAL_RECOVERYIMAGE_FILES) $(FILESLIST)
+	@echo Installed file list: $@
+	@mkdir -p $(dir $@)
+	@rm -f $@
+	$(hide) $(FILESLIST) $(TARGET_RECOVERY_ROOT_OUT) > $(@:.txt=.json)
+	$(hide) build/make/tools/fileslist_util.py -c $(@:.txt=.json) > $@
+
 recovery_initrc := $(call include-path-for, recovery)/etc/init.rc
 recovery_sepolicy := \
     $(TARGET_RECOVERY_ROOT_OUT)/sepolicy \
@@ -1226,24 +1499,28 @@
 
 recovery_kernel := $(INSTALLED_KERNEL_TARGET) # same as a non-recovery system
 recovery_ramdisk := $(PRODUCT_OUT)/ramdisk-recovery.img
-recovery_build_props := $(intermediate_system_build_prop)
-ifdef property_overrides_split_enabled
-recovery_build_props += $(INSTALLED_VENDOR_BUILD_PROP_TARGET)
-endif
-ifdef BOARD_USES_PRODUCTIMAGE
-recovery_build_props += $(INSTALLED_PRODUCT_BUILD_PROP_TARGET)
-endif
 recovery_resources_common := $(call include-path-for, recovery)/res
 
-# Set recovery_density to the density bucket of the device.
-recovery_density := unknown
+# Set recovery_density to a density bucket based on PRODUCT_AAPT_PREF_CONFIG if set. Otherwise use
+# the default medium density.
 ifneq (,$(PRODUCT_AAPT_PREF_CONFIG))
-# If PRODUCT_AAPT_PREF_CONFIG includes a dpi bucket, then use that value.
+# If PRODUCT_AAPT_PREF_CONFIG includes a non-numeric dpi bucket, always perfer that value.
 recovery_density := $(filter %dpi,$(PRODUCT_AAPT_PREF_CONFIG))
-else
-# Otherwise, use the default medium density.
-recovery_densities := mdpi
+ifeq (,$(filter xxxhdpi xxhdpi xhdpi hdpi mdpi,$(recovery_density)))
+recovery_density_value := $(patsubst %dpi,%,$(recovery_density))
+# Map the numeric dpi value to a bucket. We roughly use the medium point between the primary
+# densities to split buckets.
+# ------160------240------320----------480------------640------
+#       mdpi     hdpi    xhdpi        xxhdpi        xxxhdpi
+recovery_density := $(strip \
+  $(or $(if $(filter $(shell echo $$(($(recovery_density_value) >= 560))),1),xxxhdpi),\
+       $(if $(filter $(shell echo $$(($(recovery_density_value) >= 400))),1),xxhdpi),\
+       $(if $(filter $(shell echo $$(($(recovery_density_value) >= 280))),1),xhdpi),\
+       $(if $(filter $(shell echo $$(($(recovery_density_value) >= 200))),1),hdpi,mdpi)))
 endif
+else # PRODUCT_AAPT_PREF_CONFIG is empty
+recovery_density := mdpi
+endif # PRODUCT_AAPT_PREF_CONFIG
 
 ifneq (,$(wildcard $(recovery_resources_common)-$(recovery_density)))
 recovery_resources_common := $(recovery_resources_common)-$(recovery_density)
@@ -1251,22 +1528,119 @@
 recovery_resources_common := $(recovery_resources_common)-xhdpi
 endif
 
-# Select the 18x32 font on high-density devices (xhdpi and up); and
-# the 12x22 font on other devices.  Note that the font selected here
-# can be overridden for a particular device by putting a font.png in
-# its private recovery resources.
-
-ifneq (,$(filter xxxhdpi 560dpi xxhdpi 400dpi xhdpi,$(recovery_density)))
+# Select the 18x32 font on high-density devices (xhdpi and up); and the 12x22 font on other devices.
+# Note that the font selected here can be overridden for a particular device by putting a font.png
+# in its private recovery resources.
+ifneq (,$(filter xxxhdpi xxhdpi xhdpi,$(recovery_density)))
 recovery_font := $(call include-path-for, recovery)/fonts/18x32.png
 else
 recovery_font := $(call include-path-for, recovery)/fonts/12x22.png
 endif
 
+
+# We will only generate the recovery background text images if the variable
+# TARGET_RECOVERY_UI_SCREEN_WIDTH is defined. For devices with xxxhdpi and xxhdpi, we set the
+# variable to the commonly used values here, if it hasn't been intialized elsewhere. While for
+# devices with lower density, they must have TARGET_RECOVERY_UI_SCREEN_WIDTH defined in their
+# BoardConfig in order to use this feature.
+ifeq ($(recovery_density),xxxhdpi)
+TARGET_RECOVERY_UI_SCREEN_WIDTH ?= 1440
+else ifeq ($(recovery_density),xxhdpi)
+TARGET_RECOVERY_UI_SCREEN_WIDTH ?= 1080
+endif
+
+ifneq ($(TARGET_RECOVERY_UI_SCREEN_WIDTH),)
+# Subtracts the margin width and menu indent from the screen width; it's safe to be conservative.
+ifeq ($(TARGET_RECOVERY_UI_MARGIN_WIDTH),)
+  recovery_image_width := $$(($(TARGET_RECOVERY_UI_SCREEN_WIDTH) - 10))
+else
+  recovery_image_width := $$(($(TARGET_RECOVERY_UI_SCREEN_WIDTH) - $(TARGET_RECOVERY_UI_MARGIN_WIDTH) - 10))
+endif
+
+
+RECOVERY_INSTALLING_TEXT_FILE := $(call intermediates-dir-for,PACKAGING,recovery_text_res)/installing_text.png
+RECOVERY_INSTALLING_SECURITY_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/installing_security_text.png
+RECOVERY_ERASING_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/erasing_text.png
+RECOVERY_ERROR_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/error_text.png
+RECOVERY_NO_COMMAND_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/no_command_text.png
+
+RECOVERY_CANCEL_WIPE_DATA_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/cancel_wipe_data_text.png
+RECOVERY_FACTORY_DATA_RESET_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/factory_data_reset_text.png
+RECOVERY_TRY_AGAIN_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/try_again_text.png
+RECOVERY_WIPE_DATA_CONFIRMATION_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/wipe_data_confirmation_text.png
+RECOVERY_WIPE_DATA_MENU_HEADER_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/wipe_data_menu_header_text.png
+
+generated_recovery_text_files := \
+  $(RECOVERY_INSTALLING_TEXT_FILE) \
+  $(RECOVERY_INSTALLING_SECURITY_TEXT_FILE) \
+  $(RECOVERY_ERASING_TEXT_FILE) \
+  $(RECOVERY_ERROR_TEXT_FILE) \
+  $(RECOVERY_NO_COMMAND_TEXT_FILE) \
+  $(RECOVERY_CANCEL_WIPE_DATA_TEXT_FILE) \
+  $(RECOVERY_FACTORY_DATA_RESET_TEXT_FILE) \
+  $(RECOVERY_TRY_AGAIN_TEXT_FILE) \
+  $(RECOVERY_WIPE_DATA_CONFIRMATION_TEXT_FILE) \
+  $(RECOVERY_WIPE_DATA_MENU_HEADER_TEXT_FILE)
+
+resource_dir := $(call include-path-for, recovery)/tools/recovery_l10n/res/
+image_generator_jar := $(HOST_OUT_JAVA_LIBRARIES)/RecoveryImageGenerator.jar
+zopflipng := $(HOST_OUT_EXECUTABLES)/zopflipng
+$(RECOVERY_INSTALLING_TEXT_FILE): PRIVATE_SOURCE_FONTS := $(recovery_noto-fonts_dep) $(recovery_roboto-fonts_dep)
+$(RECOVERY_INSTALLING_TEXT_FILE): PRIVATE_RECOVERY_FONT_FILES_DIR := $(call intermediates-dir-for,PACKAGING,recovery_font_files)
+$(RECOVERY_INSTALLING_TEXT_FILE): PRIVATE_RESOURCE_DIR := $(resource_dir)
+$(RECOVERY_INSTALLING_TEXT_FILE): PRIVATE_IMAGE_GENERATOR_JAR := $(image_generator_jar)
+$(RECOVERY_INSTALLING_TEXT_FILE): PRIVATE_ZOPFLIPNG := $(zopflipng)
+$(RECOVERY_INSTALLING_TEXT_FILE): PRIVATE_RECOVERY_IMAGE_WIDTH := $(recovery_image_width)
+$(RECOVERY_INSTALLING_TEXT_FILE): PRIVATE_RECOVERY_TEXT_LIST := \
+  recovery_installing \
+  recovery_installing_security \
+  recovery_erasing \
+  recovery_error \
+  recovery_no_command \
+  recovery_cancel_wipe_data \
+  recovery_factory_data_reset \
+  recovery_try_again \
+  recovery_wipe_data_menu_header \
+  recovery_wipe_data_confirmation
+$(RECOVERY_INSTALLING_TEXT_FILE): .KATI_IMPLICIT_OUTPUTS := $(filter-out $(RECOVERY_INSTALLING_TEXT_FILE),$(generated_recovery_text_files))
+$(RECOVERY_INSTALLING_TEXT_FILE): $(image_generator_jar) $(resource_dir) $(recovery_noto-fonts_dep) $(recovery_roboto-fonts_dep) $(zopflipng)
+	# Prepares the font directory.
+	@rm -rf $(PRIVATE_RECOVERY_FONT_FILES_DIR)
+	@mkdir -p $(PRIVATE_RECOVERY_FONT_FILES_DIR)
+	$(foreach filename,$(PRIVATE_SOURCE_FONTS), cp $(filename) $(PRIVATE_RECOVERY_FONT_FILES_DIR) &&) true
+
+	@rm -rf $(dir $@)
+	@mkdir -p $(dir $@)
+	$(foreach text_name,$(PRIVATE_RECOVERY_TEXT_LIST), \
+	  $(eval output_file := $(dir $@)/$(patsubst recovery_%,%_text.png,$(text_name))) \
+	  java -jar $(PRIVATE_IMAGE_GENERATOR_JAR) \
+	    --image_width $(PRIVATE_RECOVERY_IMAGE_WIDTH) \
+	    --text_name $(text_name) \
+	    --font_dir $(PRIVATE_RECOVERY_FONT_FILES_DIR) \
+	    --resource_dir $(PRIVATE_RESOURCE_DIR) \
+	    --output_file $(output_file) && \
+	  $(PRIVATE_ZOPFLIPNG) -y --iterations=1 --filters=0 $(output_file) $(output_file) > /dev/null &&) true
+else
+RECOVERY_INSTALLING_TEXT_FILE :=
+RECOVERY_INSTALLING_SECURITY_TEXT_FILE :=
+RECOVERY_ERASING_TEXT_FILE :=
+RECOVERY_ERROR_TEXT_FILE :=
+RECOVERY_NO_COMMAND_TEXT_FILE :=
+RECOVERY_CANCEL_WIPE_DATA_TEXT_FILE :=
+RECOVERY_FACTORY_DATA_RESET_TEXT_FILE :=
+RECOVERY_TRY_AGAIN_TEXT_FILE :=
+RECOVERY_WIPE_DATA_CONFIRMATION_TEXT_FILE :=
+RECOVERY_WIPE_DATA_MENU_HEADER_TEXT_FILE :=
+endif # TARGET_RECOVERY_UI_SCREEN_WIDTH
+
 ifndef TARGET_PRIVATE_RES_DIRS
 TARGET_PRIVATE_RES_DIRS := $(wildcard $(TARGET_DEVICE_DIR)/recovery/res)
 endif
 recovery_resource_deps := $(shell find $(recovery_resources_common) \
   $(TARGET_PRIVATE_RES_DIRS) -type f)
+recovery_resource_deps += $(generated_recovery_text_files)
+
+
 ifdef TARGET_RECOVERY_FSTAB
 recovery_fstab := $(TARGET_RECOVERY_FSTAB)
 else
@@ -1288,23 +1662,69 @@
 #      (BOARD_USES_FULL_RECOVERY_IMAGE = true);
 #   b) We build a single image that contains boot and recovery both - no recovery image to install
 #      (BOARD_USES_RECOVERY_AS_BOOT = true);
-#   c) We build the root into system image - not needing the resource file as we do bsdiff
+#   c) We mount the system image as / and therefore do not have a ramdisk in boot.img
 #      (BOARD_BUILD_SYSTEM_ROOT_IMAGE = true).
 #   d) We include the recovery DTBO image within recovery - not needing the resource file as we
 #      do bsdiff because boot and recovery will contain different number of entries
 #      (BOARD_INCLUDE_RECOVERY_DTBO = true).
-# Note that condition b) implies condition c), because of the earlier check in this file:
-# "BOARD_USES_RECOVERY_AS_BOOT = true must have BOARD_BUILD_SYSTEM_ROOT_IMAGE = true" (not vice
-# versa though).
 
-ifeq (,$(filter true, $(BOARD_USES_FULL_RECOVERY_IMAGE) $(BOARD_BUILD_SYSTEM_ROOT_IMAGE) \
-  $(BOARD_INCLUDE_RECOVERY_DTBO)))
+ifeq (,$(filter true, $(BOARD_USES_FULL_RECOVERY_IMAGE) $(BOARD_USES_RECOVERY_AS_BOOT) \
+  $(BOARD_BUILD_SYSTEM_ROOT_IMAGE) $(BOARD_INCLUDE_RECOVERY_DTBO)))
 # Named '.dat' so we don't attempt to use imgdiff for patching it.
 RECOVERY_RESOURCE_ZIP := $(TARGET_OUT)/etc/recovery-resource.dat
 else
 RECOVERY_RESOURCE_ZIP :=
 endif
 
+INSTALLED_RECOVERY_BUILD_PROP_TARGET := $(TARGET_RECOVERY_ROOT_OUT)/prop.default
+
+$(INSTALLED_RECOVERY_BUILD_PROP_TARGET): PRIVATE_RECOVERY_UI_PROPERTIES := \
+    TARGET_RECOVERY_UI_ANIMATION_FPS:animation_fps \
+    TARGET_RECOVERY_UI_MARGIN_HEIGHT:margin_height \
+    TARGET_RECOVERY_UI_MARGIN_WIDTH:margin_width \
+    TARGET_RECOVERY_UI_MENU_UNUSABLE_ROWS:menu_unusable_rows \
+    TARGET_RECOVERY_UI_PROGRESS_BAR_BASELINE:progress_bar_baseline \
+    TARGET_RECOVERY_UI_TOUCH_LOW_THRESHOLD:touch_low_threshold \
+    TARGET_RECOVERY_UI_TOUCH_HIGH_THRESHOLD:touch_high_threshold \
+    TARGET_RECOVERY_UI_VR_STEREO_OFFSET:vr_stereo_offset
+
+# Parses the given list of build variables and writes their values as build properties if defined.
+# For example, if a target defines `TARGET_RECOVERY_UI_MARGIN_HEIGHT := 100`,
+# `ro.recovery.ui.margin_height=100` will be appended to the given output file.
+# $(1): Map from the build variable names to property names
+# $(2): Output file
+define append-recovery-ui-properties
+echo "#" >> $(2)
+echo "# RECOVERY UI BUILD PROPERTIES" >> $(2)
+echo "#" >> $(2)
+$(foreach prop,$(1), \
+    $(eval _varname := $(call word-colon,1,$(prop))) \
+    $(eval _propname := $(call word-colon,2,$(prop))) \
+    $(eval _value := $($(_varname))) \
+    $(if $(_value), \
+        echo ro.recovery.ui.$(_propname)=$(_value) >> $(2) &&)) true
+endef
+
+$(INSTALLED_RECOVERY_BUILD_PROP_TARGET): \
+	    $(INSTALLED_DEFAULT_PROP_TARGET) \
+	    $(INSTALLED_VENDOR_DEFAULT_PROP_TARGET) \
+	    $(intermediate_system_build_prop) \
+	    $(INSTALLED_VENDOR_BUILD_PROP_TARGET) \
+	    $(INSTALLED_ODM_BUILD_PROP_TARGET) \
+	    $(INSTALLED_PRODUCT_BUILD_PROP_TARGET) \
+	    $(INSTALLED_PRODUCT_SERVICES_BUILD_PROP_TARGET)
+	@echo "Target recovery buildinfo: $@"
+	$(hide) mkdir -p $(dir $@)
+	$(hide) rm -f $@
+	$(hide) cat $(INSTALLED_DEFAULT_PROP_TARGET) > $@
+	$(hide) cat $(INSTALLED_VENDOR_DEFAULT_PROP_TARGET) >> $@
+	$(hide) cat $(intermediate_system_build_prop) >> $@
+	$(hide) cat $(INSTALLED_VENDOR_BUILD_PROP_TARGET) >> $@
+	$(hide) cat $(INSTALLED_ODM_BUILD_PROP_TARGET) >> $@
+	$(hide) cat $(INSTALLED_PRODUCT_BUILD_PROP_TARGET) >> $@
+	$(hide) cat $(INSTALLED_PRODUCT_SERVICES_BUILD_PROP_TARGET) >> $@
+	$(call append-recovery-ui-properties,$(PRIVATE_RECOVERY_UI_PROPERTIES),$@)
+
 INTERNAL_RECOVERYIMAGE_ARGS := \
 	$(addprefix --second ,$(INSTALLED_2NDBOOTLOADER_TARGET)) \
 	--kernel $(recovery_kernel) \
@@ -1332,15 +1752,13 @@
 # Generate a file containing the keys that will be read by the
 # recovery binary.
 RECOVERY_INSTALL_OTA_KEYS := \
-	$(call intermediates-dir-for,PACKAGING,ota_keys)/keys
-DUMPKEY_JAR := $(HOST_OUT_JAVA_LIBRARIES)/dumpkey.jar
+	$(call intermediates-dir-for,PACKAGING,ota_keys)/otacerts.zip
 $(RECOVERY_INSTALL_OTA_KEYS): PRIVATE_OTA_PUBLIC_KEYS := $(OTA_PUBLIC_KEYS)
 $(RECOVERY_INSTALL_OTA_KEYS): extra_keys := $(patsubst %,%.x509.pem,$(PRODUCT_EXTRA_RECOVERY_KEYS))
-$(RECOVERY_INSTALL_OTA_KEYS): $(OTA_PUBLIC_KEYS) $(DUMPKEY_JAR) $(extra_keys)
-	@echo "DumpPublicKey: $@ <= $(PRIVATE_OTA_PUBLIC_KEYS) $(extra_keys)"
-	@rm -rf $@
-	@mkdir -p $(dir $@)
-	$(JAVA) -jar $(DUMPKEY_JAR) $(PRIVATE_OTA_PUBLIC_KEYS) $(extra_keys) > $@
+$(RECOVERY_INSTALL_OTA_KEYS): $(SOONG_ZIP) $(OTA_PUBLIC_KEYS) $(extra_keys)
+	$(hide) rm -f $@
+	$(hide) mkdir -p $(dir $@)
+	$(hide) $(SOONG_ZIP) -o $@ $(foreach key_file, $(PRIVATE_OTA_PUBLIC_KEYS) $(extra_keys), -C $(dir $(key_file)) -f $(key_file))
 
 RECOVERYIMAGE_ID_FILE := $(PRODUCT_OUT)/recovery.id
 
@@ -1348,43 +1766,35 @@
 define build-recoveryimage-target
   # Making recovery image
   $(hide) mkdir -p $(TARGET_RECOVERY_OUT)
-  $(hide) mkdir -p $(TARGET_RECOVERY_ROOT_OUT)/etc $(TARGET_RECOVERY_ROOT_OUT)/sdcard $(TARGET_RECOVERY_ROOT_OUT)/tmp
+  $(hide) mkdir -p $(TARGET_RECOVERY_ROOT_OUT)/sdcard $(TARGET_RECOVERY_ROOT_OUT)/tmp
   # Copying baseline ramdisk...
   # Use rsync because "cp -Rf" fails to overwrite broken symlinks on Mac.
-  $(hide) rsync -a --exclude=etc --exclude=sdcard $(IGNORE_RECOVERY_SEPOLICY) $(IGNORE_CACHE_LINK) $(TARGET_ROOT_OUT) $(TARGET_RECOVERY_OUT)
-  # Copy adbd from system/bin to recovery/root/sbin
-  $(hide) cp -f $(TARGET_OUT_EXECUTABLES)/adbd $(TARGET_RECOVERY_ROOT_OUT)/sbin/adbd
+  $(hide) rsync -a --exclude=sdcard $(IGNORE_RECOVERY_SEPOLICY) $(IGNORE_CACHE_LINK) $(TARGET_ROOT_OUT) $(TARGET_RECOVERY_OUT)
   # Modifying ramdisk contents...
+  $(if $(filter true,$(BOARD_BUILD_SYSTEM_ROOT_IMAGE)),, \
+    $(hide) ln -sf /system/bin/init $(TARGET_RECOVERY_ROOT_OUT)/init)
   $(if $(BOARD_RECOVERY_KERNEL_MODULES), \
     $(call build-image-kernel-modules,$(BOARD_RECOVERY_KERNEL_MODULES),$(TARGET_RECOVERY_ROOT_OUT),,$(call intermediates-dir-for,PACKAGING,depmod_recovery)))
   # Removes $(TARGET_RECOVERY_ROOT_OUT)/init*.rc EXCEPT init.recovery*.rc.
   $(hide) find $(TARGET_RECOVERY_ROOT_OUT) -maxdepth 1 -name 'init*.rc' -type f -not -name "init.recovery.*.rc" | xargs rm -f
   $(hide) cp -f $(recovery_initrc) $(TARGET_RECOVERY_ROOT_OUT)/
-  $(hide) cp $(TARGET_ROOT_OUT)/init.recovery.*.rc $(TARGET_RECOVERY_ROOT_OUT)/ || true # Ignore error when the src file doesn't exist.
+  $(hide) cp $(TARGET_ROOT_OUT)/init.recovery.*.rc $(TARGET_RECOVERY_ROOT_OUT)/ 2> /dev/null || true # Ignore error when the src file doesn't exist.
   $(hide) mkdir -p $(TARGET_RECOVERY_ROOT_OUT)/res
   $(hide) rm -rf $(TARGET_RECOVERY_ROOT_OUT)/res/*
   $(hide) cp -rf $(recovery_resources_common)/* $(TARGET_RECOVERY_ROOT_OUT)/res
+  $(hide) $(foreach recovery_text_file,$(generated_recovery_text_files), \
+    cp -rf $(recovery_text_file) $(TARGET_RECOVERY_ROOT_OUT)/res/images/ &&) true
   $(hide) cp -f $(recovery_font) $(TARGET_RECOVERY_ROOT_OUT)/res/images/font.png
   $(hide) $(foreach item,$(TARGET_PRIVATE_RES_DIRS), \
     cp -rf $(item) $(TARGET_RECOVERY_ROOT_OUT)/$(newline))
   $(hide) $(foreach item,$(recovery_fstab), \
-    cp -f $(item) $(TARGET_RECOVERY_ROOT_OUT)/etc/recovery.fstab)
+    cp -f $(item) $(TARGET_RECOVERY_ROOT_OUT)/system/etc/recovery.fstab)
   $(if $(strip $(recovery_wipe)), \
-    $(hide) cp -f $(recovery_wipe) $(TARGET_RECOVERY_ROOT_OUT)/etc/recovery.wipe)
-  $(hide) cp $(RECOVERY_INSTALL_OTA_KEYS) $(TARGET_RECOVERY_ROOT_OUT)/res/keys
-  $(hide) cat $(INSTALLED_DEFAULT_PROP_TARGET) \
-          > $(TARGET_RECOVERY_ROOT_OUT)/prop.default
-  $(if $(INSTALLED_VENDOR_DEFAULT_PROP_TARGET), \
-    $(hide) cat $(INSTALLED_VENDOR_DEFAULT_PROP_TARGET) \
-            >> $(TARGET_RECOVERY_ROOT_OUT)/prop.default)
-  $(hide) cat $(recovery_build_props) \
-          >> $(TARGET_RECOVERY_ROOT_OUT)/prop.default
+    $(hide) cp -f $(recovery_wipe) $(TARGET_RECOVERY_ROOT_OUT)/system/etc/recovery.wipe)
+  $(hide) mkdir -p $(TARGET_RECOVERY_ROOT_OUT)/system/etc/security
+  $(hide) cp $(RECOVERY_INSTALL_OTA_KEYS) $(TARGET_RECOVERY_ROOT_OUT)/system/etc/security/otacerts.zip
   $(hide) ln -sf prop.default $(TARGET_RECOVERY_ROOT_OUT)/default.prop
   $(BOARD_RECOVERY_IMAGE_PREPARE)
-  $(if $(filter true,$(BOARD_BUILD_SYSTEM_ROOT_IMAGE)), \
-    $(hide) mkdir -p $(TARGET_RECOVERY_ROOT_OUT)/system_root; \
-            rm -rf $(TARGET_RECOVERY_ROOT_OUT)/system; \
-            ln -sf /system_root/system $(TARGET_RECOVERY_ROOT_OUT)/system) # Mount the system_root_image to /system_root and symlink /system.
   $(hide) $(MKBOOTFS) -d $(TARGET_OUT) $(TARGET_RECOVERY_ROOT_OUT) | $(MINIGZIP) > $(recovery_ramdisk)
   $(if $(filter true,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VBOOT)), \
     $(hide) $(MKBOOTIMG) $(INTERNAL_RECOVERYIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $(1).unsigned, \
@@ -1406,8 +1816,6 @@
       $(hide) $(AVBTOOL) add_hash_footer --image $(1) --partition_size $(BOARD_RECOVERYIMAGE_PARTITION_SIZE) --partition_name recovery $(INTERNAL_AVB_RECOVERY_SIGNING_ARGS) $(BOARD_AVB_RECOVERY_ADD_HASH_FOOTER_ARGS)))
 endef
 
-ADBD := $(TARGET_OUT_EXECUTABLES)/adbd
-
 ifeq ($(BOARD_USES_RECOVERY_AS_BOOT),true)
 ifeq (true,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_BOOT_SIGNER))
 $(INSTALLED_BOOTIMAGE_TARGET) : $(BOOT_SIGNER)
@@ -1418,34 +1826,44 @@
 ifeq (true,$(BOARD_AVB_ENABLE))
 $(INSTALLED_BOOTIMAGE_TARGET) : $(AVBTOOL) $(BOARD_AVB_BOOT_KEY_PATH)
 endif
-$(INSTALLED_BOOTIMAGE_TARGET): $(MKBOOTFS) $(MKBOOTIMG) $(MINIGZIP) $(ADBD) \
-		$(INSTALLED_RAMDISK_TARGET) \
-		$(INTERNAL_RECOVERYIMAGE_FILES) \
-		$(recovery_initrc) $(recovery_sepolicy) $(recovery_kernel) \
-		$(INSTALLED_2NDBOOTLOADER_TARGET) \
-		$(recovery_build_props) $(recovery_resource_deps) \
-		$(recovery_fstab) \
-		$(RECOVERY_INSTALL_OTA_KEYS) \
-		$(INSTALLED_VENDOR_DEFAULT_PROP_TARGET) \
-		$(BOARD_RECOVERY_KERNEL_MODULES) \
-		$(DEPMOD)
-		$(call pretty,"Target boot image from recovery: $@")
-		$(call build-recoveryimage-target, $@)
+ifdef BOARD_INCLUDE_RECOVERY_DTBO
+$(INSTALLED_BOOTIMAGE_TARGET): $(BOARD_PREBUILT_DTBOIMAGE)
 endif
 
-$(INSTALLED_RECOVERYIMAGE_TARGET): $(MKBOOTFS) $(MKBOOTIMG) $(MINIGZIP) $(ADBD) \
-		$(INSTALLED_RAMDISK_TARGET) \
-		$(INSTALLED_BOOTIMAGE_TARGET) \
-		$(INTERNAL_RECOVERYIMAGE_FILES) \
-		$(recovery_initrc) $(recovery_sepolicy) $(recovery_kernel) \
-		$(INSTALLED_2NDBOOTLOADER_TARGET) \
-		$(recovery_build_props) $(recovery_resource_deps) \
-		$(recovery_fstab) \
-		$(RECOVERY_INSTALL_OTA_KEYS) \
-		$(INSTALLED_VENDOR_DEFAULT_PROP_TARGET) \
-		$(BOARD_RECOVERY_KERNEL_MODULES) \
-		$(DEPMOD)
-		$(call build-recoveryimage-target, $@)
+$(INSTALLED_BOOTIMAGE_TARGET): $(MKBOOTFS) $(MKBOOTIMG) $(MINIGZIP) \
+	    $(INTERNAL_ROOT_FILES) \
+	    $(INSTALLED_RAMDISK_TARGET) \
+	    $(INTERNAL_RECOVERYIMAGE_FILES) \
+	    $(recovery_initrc) $(recovery_sepolicy) $(recovery_kernel) \
+	    $(INSTALLED_2NDBOOTLOADER_TARGET) \
+	    $(INSTALLED_RECOVERY_BUILD_PROP_TARGET) \
+	    $(recovery_resource_deps) \
+	    $(recovery_fstab) \
+	    $(RECOVERY_INSTALL_OTA_KEYS) \
+	    $(BOARD_RECOVERY_KERNEL_MODULES) \
+	    $(DEPMOD)
+	$(call pretty,"Target boot image from recovery: $@")
+	$(call build-recoveryimage-target, $@)
+endif # BOARD_USES_RECOVERY_AS_BOOT
+
+ifdef BOARD_INCLUDE_RECOVERY_DTBO
+$(INSTALLED_RECOVERYIMAGE_TARGET): $(BOARD_PREBUILT_DTBOIMAGE)
+endif
+
+$(INSTALLED_RECOVERYIMAGE_TARGET): $(MKBOOTFS) $(MKBOOTIMG) $(MINIGZIP) \
+	    $(INTERNAL_ROOT_FILES) \
+	    $(INSTALLED_RAMDISK_TARGET) \
+	    $(INSTALLED_BOOTIMAGE_TARGET) \
+	    $(INTERNAL_RECOVERYIMAGE_FILES) \
+	    $(recovery_initrc) $(recovery_sepolicy) $(recovery_kernel) \
+	    $(INSTALLED_2NDBOOTLOADER_TARGET) \
+	    $(INSTALLED_RECOVERY_BUILD_PROP_TARGET) \
+	    $(recovery_resource_deps) \
+	    $(recovery_fstab) \
+	    $(RECOVERY_INSTALL_OTA_KEYS) \
+	    $(BOARD_RECOVERY_KERNEL_MODULES) \
+	    $(DEPMOD)
+	$(call build-recoveryimage-target, $@)
 
 ifdef RECOVERY_RESOURCE_ZIP
 $(RECOVERY_RESOURCE_ZIP): $(INSTALLED_RECOVERYIMAGE_TARGET) | $(ZIPTIME)
@@ -1482,23 +1900,44 @@
     $(filter-out $(foreach p,$(overridden_packages),$(p) %/$(p).apk), \
         $(ALL_PDK_FUSION_FILES))
 
-INTERNAL_SYSTEMIMAGE_FILES := $(filter $(TARGET_OUT)/%, \
+INTERNAL_SYSTEMIMAGE_FILES := $(sort $(filter $(TARGET_OUT)/%, \
     $(ALL_GENERATED_SOURCES) \
     $(ALL_DEFAULT_INSTALLED_MODULES) \
     $(PDK_FUSION_SYSIMG_FILES) \
     $(RECOVERY_RESOURCE_ZIP)) \
-    $(PDK_FUSION_SYMLINK_STAMP)
+    $(PDK_FUSION_SYMLINK_STAMP))
 
 FULL_SYSTEMIMAGE_DEPS := $(INTERNAL_SYSTEMIMAGE_FILES) $(INTERNAL_USERIMAGES_DEPS)
 
 # ASAN libraries in the system image - add dependency.
 ASAN_IN_SYSTEM_INSTALLED := $(TARGET_OUT)/asan.tar.bz2
-ifneq (,$(SANITIZE_TARGET))
+ifneq (,$(filter address, $(SANITIZE_TARGET)))
   ifeq (true,$(SANITIZE_TARGET_SYSTEM))
     FULL_SYSTEMIMAGE_DEPS += $(ASAN_IN_SYSTEM_INSTALLED)
   endif
 endif
 
+FULL_SYSTEMIMAGE_DEPS += $(INTERNAL_ROOT_FILES) $(INSTALLED_FILES_FILE_ROOT)
+
+# -----------------------------------------------------------------
+# Final System VINTF manifest including fragments. This is not assembled
+# on the device because it depends on everything in a given device
+# image which defines a vintf_fragment.
+
+BUILT_ASSEMBLED_SYSTEM_MANIFEST := $(PRODUCT_OUT)/verified_assembled_system_manifest.xml
+$(BUILT_ASSEMBLED_SYSTEM_MANIFEST): $(HOST_OUT_EXECUTABLES)/assemble_vintf
+$(BUILT_ASSEMBLED_SYSTEM_MANIFEST): $(BUILT_VENDOR_MATRIX)
+$(BUILT_ASSEMBLED_SYSTEM_MANIFEST): $(BUILT_SYSTEM_MANIFEST)
+$(BUILT_ASSEMBLED_SYSTEM_MANIFEST): $(FULL_SYSTEMIMAGE_DEPS)
+	@echo "Verifying system VINTF manifest."
+	PRODUCT_ENFORCE_VINTF_MANIFEST=$(PRODUCT_ENFORCE_VINTF_MANIFEST) \
+	$(HOST_OUT_EXECUTABLES)/assemble_vintf \
+	    -c $(BUILT_VENDOR_MATRIX) \
+	    -i $(BUILT_SYSTEM_MANIFEST) \
+	    $$([ -d $(TARGET_OUT)/etc/vintf/manifest ] && \
+	        find $(TARGET_OUT)/etc/vintf/manifest -type f -name "*.xml" | \
+	        sed "s/^/-i /" | tr '\n' ' ') -o $@
+
 # -----------------------------------------------------------------
 # installed file list
 # Depending on anything that $(BUILT_SYSTEMIMAGE) depends on.
@@ -1506,6 +1945,8 @@
 # so that we can get the size stat even if the build fails due to too large
 # system image.
 INSTALLED_FILES_FILE := $(PRODUCT_OUT)/installed-files.txt
+INSTALLED_FILES_JSON := $(INSTALLED_FILES_FILE:.txt=.json)
+$(INSTALLED_FILES_FILE): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON)
 $(INSTALLED_FILES_FILE): $(FULL_SYSTEMIMAGE_DEPS) $(FILESLIST)
 	@echo Installed file list: $@
 	@mkdir -p $(dir $@)
@@ -1552,40 +1993,70 @@
 endef
 endif
 
+# Create symlink /system/product_services to /product_services if necessary.
+ifdef BOARD_USES_PRODUCT_SERVICESIMAGE
+define create-system-product_services-symlink
+$(hide) if [ -d $(TARGET_OUT)/product_services ] && [ ! -h $(TARGET_OUT)/product_services ]; then \
+  echo 'Non-symlink $(TARGET_OUT)/product_services detected!' 1>&2; \
+  echo 'You cannot install files to $(TARGET_OUT)/product_services while building a separate product_services.img!' 1>&2; \
+  exit 1; \
+fi
+$(hide) ln -sf /product_services $(TARGET_OUT)/product_services
+endef
+else
+define create-system-product_services-symlink
+endef
+endif
+
+# Create symlink /vendor/odm to /odm if necessary.
+ifdef BOARD_USES_ODMIMAGE
+define create-vendor-odm-symlink
+$(hide) if [ -d $(TARGET_OUT_VENDOR)/odm ] && [ ! -h $(TARGET_OUT_VENDOR)/odm ]; then \
+  echo 'Non-symlink $(TARGET_OUT_VENDOR)/odm detected!' 1>&2; \
+  echo 'You cannot install files to $(TARGET_OUT_VENDOR)/odm while building a separate odm.img!' 1>&2; \
+  exit 1; \
+fi
+$(hide) ln -sf /odm $(TARGET_OUT_VENDOR)/odm
+endef
+else
+define create-vendor-odm-symlink
+endef
+endif
+
 # $(1): output file
 define build-systemimage-target
   @echo "Target system fs image: $(1)"
   $(call create-system-vendor-symlink)
   $(call create-system-product-symlink)
+  $(call create-system-product_services-symlink)
   @mkdir -p $(dir $(1)) $(systemimage_intermediates) && rm -rf $(systemimage_intermediates)/system_image_info.txt
-  $(call generate-userimage-prop-dictionary, $(systemimage_intermediates)/system_image_info.txt, \
+  $(call generate-image-prop-dictionary, $(systemimage_intermediates)/system_image_info.txt,system, \
       skip_fsck=true)
   $(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH \
       build/make/tools/releasetools/build_image.py \
       $(TARGET_OUT) $(systemimage_intermediates)/system_image_info.txt $(1) $(TARGET_OUT) \
-      || ( echo "Out of space? the tree size of $(TARGET_OUT) is (MB): " 1>&2 ;\
-           du -sm $(TARGET_OUT) 1>&2;\
-           if [ "$(INTERNAL_USERIMAGES_EXT_VARIANT)" == "ext4" ]; then \
-               maxsize=$(BOARD_SYSTEMIMAGE_PARTITION_SIZE); \
-               echo "The max is $$(( maxsize / 1048576 )) MB." 1>&2 ;\
-           else \
-               echo "The max is $$(( $(BOARD_SYSTEMIMAGE_PARTITION_SIZE) / 1048576 )) MB." 1>&2 ;\
-           fi; \
-           mkdir -p $(DIST_DIR); cp $(INSTALLED_FILES_FILE) $(DIST_DIR)/installed-files-rescued.txt; \
+      $(systemimage_intermediates)/generated_system_image_info.txt \
+      || ( mkdir -p $${DIST_DIR}; cp $(INSTALLED_FILES_FILE) $${DIST_DIR}/installed-files-rescued.txt; \
            exit 1 )
 endef
 
+$(BUILT_SYSTEMIMAGE): $(BUILT_ASSEMBLED_SYSTEM_MANIFEST)
 $(BUILT_SYSTEMIMAGE): $(FULL_SYSTEMIMAGE_DEPS) $(INSTALLED_FILES_FILE) $(BUILD_IMAGE_SRCS)
 	$(call build-systemimage-target,$@)
 
-INSTALLED_SYSTEMIMAGE := $(PRODUCT_OUT)/system.img
+INSTALLED_SYSTEMIMAGE_TARGET := $(PRODUCT_OUT)/system.img
 SYSTEMIMAGE_SOURCE_DIR := $(TARGET_OUT)
 
+# INSTALLED_SYSTEMIMAGE_TARGET used to be named INSTALLED_SYSTEMIMAGE. Create an alias for backward
+# compatibility, in case device-specific Makefiles still refer to the old name.
+INSTALLED_SYSTEMIMAGE := $(INSTALLED_SYSTEMIMAGE_TARGET)
+
 # The system partition needs room for the recovery image as well.  We
 # now store the recovery image as a binary patch using the boot image
 # as the source (since they are very similar).  Generate the patch so
 # we can see how big it's going to be, and include that in the system
 # image size check calculation.
+ifneq ($(INSTALLED_BOOTIMAGE_TARGET),)
 ifneq ($(INSTALLED_RECOVERYIMAGE_TARGET),)
 ifneq ($(BOARD_USES_FULL_RECOVERY_IMAGE),true)
 ifneq (,$(filter true, $(BOARD_BUILD_SYSTEM_ROOT_IMAGE) $(BOARD_INCLUDE_RECOVERY_DTBO)))
@@ -1597,31 +2068,35 @@
 RECOVERY_FROM_BOOT_PATCH := $(intermediates)/recovery_from_boot.p
 $(RECOVERY_FROM_BOOT_PATCH): PRIVATE_DIFF_TOOL := $(diff_tool)
 $(RECOVERY_FROM_BOOT_PATCH): \
-		$(INSTALLED_RECOVERYIMAGE_TARGET) \
-		$(INSTALLED_BOOTIMAGE_TARGET) \
-		$(diff_tool)
+	    $(INSTALLED_RECOVERYIMAGE_TARGET) \
+	    $(INSTALLED_BOOTIMAGE_TARGET) \
+	    $(diff_tool)
 	@echo "Construct recovery from boot"
 	mkdir -p $(dir $@)
 	$(PRIVATE_DIFF_TOOL) $(INSTALLED_BOOTIMAGE_TARGET) $(INSTALLED_RECOVERYIMAGE_TARGET) $@
 else # $(BOARD_USES_FULL_RECOVERY_IMAGE) == true
 RECOVERY_FROM_BOOT_PATCH := $(INSTALLED_RECOVERYIMAGE_TARGET)
-endif
-endif
+endif # BOARD_USES_FULL_RECOVERY_IMAGE
+endif # INSTALLED_RECOVERYIMAGE_TARGET
+endif # INSTALLED_BOOTIMAGE_TARGET
 
-
-$(INSTALLED_SYSTEMIMAGE): $(BUILT_SYSTEMIMAGE) $(RECOVERY_FROM_BOOT_PATCH)
+$(INSTALLED_SYSTEMIMAGE_TARGET): $(BUILT_SYSTEMIMAGE) $(RECOVERY_FROM_BOOT_PATCH)
 	@echo "Install system fs image: $@"
 	$(copy-file-to-target)
-	$(hide) $(call assert-max-image-size,$@ $(RECOVERY_FROM_BOOT_PATCH),$(BOARD_SYSTEMIMAGE_PARTITION_SIZE))
+	$(hide) $(call assert-max-image-size,$@ $(RECOVERY_FROM_BOOT_PATCH),\
+	    $(call read-image-prop-dictionary,\
+	        $(systemimage_intermediates)/generated_system_image_info.txt,system_size))
 
-systemimage: $(INSTALLED_SYSTEMIMAGE)
+systemimage: $(INSTALLED_SYSTEMIMAGE_TARGET)
 
 .PHONY: systemimage-nodeps snod
 systemimage-nodeps snod: $(filter-out systemimage-nodeps snod,$(MAKECMDGOALS)) \
 	            | $(INTERNAL_USERIMAGES_DEPS)
 	@echo "make $@: ignoring dependencies"
-	$(call build-systemimage-target,$(INSTALLED_SYSTEMIMAGE))
-	$(hide) $(call assert-max-image-size,$(INSTALLED_SYSTEMIMAGE),$(BOARD_SYSTEMIMAGE_PARTITION_SIZE))
+	$(call build-systemimage-target,$(INSTALLED_SYSTEMIMAGE_TARGET))
+	$(hide) $(call assert-max-image-size,$(INSTALLED_SYSTEMIMAGE_TARGET),\
+	    $(call read-image-prop-dictionary,\
+	        $(systemimage_intermediates)/generated_system_image_info.txt,system_size))
 
 ifneq (,$(filter systemimage-nodeps snod, $(MAKECMDGOALS)))
 ifeq (true,$(WITH_DEXPREOPT))
@@ -1629,8 +2104,8 @@
 endif
 endif
 
-.PHONY: sync
-sync: $(INTERNAL_SYSTEMIMAGE_FILES)
+.PHONY: sync syncsys
+sync syncsys: $(INTERNAL_SYSTEMIMAGE_FILES)
 
 #######
 ## system tarball
@@ -1638,6 +2113,7 @@
   $(call pretty,"Target system fs tarball: $(INSTALLED_SYSTEMTARBALL_TARGET)")
   $(call create-system-vendor-symlink)
   $(call create-system-product-symlink)
+  $(call create-system-product_services-symlink)
   $(MKTARBALL) $(FS_GET_STATS) \
     $(PRODUCT_OUT) system $(PRIVATE_SYSTEM_TAR) \
     $(INSTALLED_SYSTEMTARBALL_TARGET) $(TARGET_OUT)
@@ -1668,6 +2144,7 @@
 ## PDK_PLATFORM_ZIP_PRODUCT_BINARIES is used to store specified files to platform.zip.
 ## The variable will be typically set from BoardConfig.mk.
 ## Files under out dir will be rejected to prevent possible conflicts with other rules.
+ifneq (,$(BUILD_PLATFORM_ZIP))
 pdk_odex_javalibs := $(strip $(foreach m,$(DEXPREOPT.MODULES.JAVA_LIBRARIES),\
   $(if $(filter $(DEXPREOPT.$(m).INSTALLED),$(ALL_DEFAULT_INSTALLED_MODULES)),$(m))))
 pdk_odex_apps := $(strip $(foreach m,$(DEXPREOPT.MODULES.APPS),\
@@ -1707,31 +2184,45 @@
 
 $(INSTALLED_PLATFORM_ZIP): PRIVATE_DEX_FILES := $(pdk_classes_dex)
 $(INSTALLED_PLATFORM_ZIP): PRIVATE_ODEX_CONFIG := $(pdk_odex_config_mk)
-$(INSTALLED_PLATFORM_ZIP) : $(INTERNAL_SYSTEMIMAGE_FILES) $(pdk_odex_config_mk)
+$(INSTALLED_PLATFORM_ZIP) : $(SOONG_ZIP)
+# dependencies for the other partitions are defined below after their file lists
+# are known
+$(INSTALLED_PLATFORM_ZIP) : $(INTERNAL_SYSTEMIMAGE_FILES) $(pdk_classes_dex) $(pdk_odex_config_mk)
 	$(call pretty,"Platform zip package: $(INSTALLED_PLATFORM_ZIP)")
-	$(hide) rm -f $@
-	$(hide) cd $(dir $@) && zip -qryX $(notdir $@) \
-		$(TARGET_COPY_OUT_SYSTEM) \
-		$(patsubst $(PRODUCT_OUT)/%, %, $(TARGET_OUT_NOTICE_FILES)) \
-		$(addprefix symbols/,$(PDK_SYMBOL_FILES_LIST))
+	rm -f $@ $@.lst
+	echo "-C $(PRODUCT_OUT)" >> $@.lst
+	echo "-D $(TARGET_OUT)" >> $@.lst
+	echo "-D $(TARGET_OUT_NOTICE_FILES)" >> $@.lst
+	echo "$(addprefix -f $(TARGET_OUT_UNSTRIPPED)/,$(PDK_SYMBOL_FILES_LIST))" >> $@.lst
 ifdef BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE
-	$(hide) cd $(dir $@) && zip -qryX $(notdir $@) \
-		$(TARGET_COPY_OUT_VENDOR)
+	echo "-D $(TARGET_OUT_VENDOR)" >> $@.lst
 endif
 ifdef BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE
-	$(hide) cd $(dir $@) && zip -qryX $(notdir $@) \
-		$(TARGET_COPY_OUT_PRODUCT)
+	echo "-D $(TARGET_OUT_PRODUCT)" >> $@.lst
+endif
+ifdef BOARD_PRODUCT_SERVICESIMAGE_FILE_SYSTEM_TYPE
+	echo "-D $(TARGET_OUT_PRODUCT_SERVICES)" >> $@.lst
+endif
+ifdef BOARD_ODMIMAGE_FILE_SYSTEM_TYPE
+	echo "-D $(TARGET_OUT_ODM)" >> $@.lst
 endif
 ifneq ($(PDK_PLATFORM_JAVA_ZIP_CONTENTS),)
-	$(hide) cd $(OUT_DIR) && zip -qryX $(patsubst $(OUT_DIR)/%,%,$@) $(PDK_PLATFORM_JAVA_ZIP_CONTENTS)
+	echo "-C $(OUT_DIR)" >> $@.lst
+	for f in $(filter-out $(PRIVATE_DEX_FILES),$(addprefix -f $(OUT_DIR)/,$(PDK_PLATFORM_JAVA_ZIP_CONTENTS))); do \
+	  if [ -e $$f ]; then \
+	    echo "-f $$f"; \
+	  fi \
+	done >> $@.lst
 endif
 ifneq ($(PDK_PLATFORM_ZIP_PRODUCT_BINARIES),)
-	$(hide) zip -qryX $@ $(PDK_PLATFORM_ZIP_PRODUCT_BINARIES)
+        echo "-C . $(addprefix -f ,$(PDK_PLATFORM_ZIP_PRODUCT_BINARIES))" >> $@.lst
 endif
 	@# Add dex-preopt files and config.
-	$(if $(PRIVATE_DEX_FILES),$(hide) cd $(OUT_DIR) && zip -qryX $(patsubst $(OUT_DIR)/%,%,$@ $(PRIVATE_DEX_FILES)))
-	$(hide) touch $(PRODUCT_OUT)/pdk.mk
-	$(hide) zip -qryXj $@ $(PRIVATE_ODEX_CONFIG) $(PRODUCT_OUT)/pdk.mk
+	$(if $(PRIVATE_DEX_FILES),\
+	  echo "-C $(OUT_DIR) $(addprefix -f ,$(PRIVATE_DEX_FILES))") >> $@.lst
+	touch $(PRODUCT_OUT)/pdk.mk
+	echo "-C $(PRODUCT_OUT) -f $(PRIVATE_ODEX_CONFIG) -f $(PRODUCT_OUT)/pdk.mk" >> $@.lst
+	$(SOONG_ZIP) --ignore_missing_files -o $@ @$@.lst
 
 .PHONY: platform
 platform: $(INSTALLED_PLATFORM_ZIP)
@@ -1744,6 +2235,8 @@
 $(call dist-for-goals, platform platform-java, $(INSTALLED_PLATFORM_ZIP))
 endif
 
+endif # BUILD_PLATFORM_ZIP
+
 # -----------------------------------------------------------------
 ## boot tarball
 define build-boottarball-target
@@ -1794,7 +2287,7 @@
   $(call pretty,"Target userdata fs image: $(INSTALLED_USERDATAIMAGE_TARGET)")
   @mkdir -p $(TARGET_OUT_DATA)
   @mkdir -p $(userdataimage_intermediates) && rm -rf $(userdataimage_intermediates)/userdata_image_info.txt
-  $(call generate-userimage-prop-dictionary, $(userdataimage_intermediates)/userdata_image_info.txt, skip_fsck=true)
+  $(call generate-image-prop-dictionary, $(userdataimage_intermediates)/userdata_image_info.txt,userdata,skip_fsck=true)
   $(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH \
       build/make/tools/releasetools/build_image.py \
       $(TARGET_OUT_DATA) $(userdataimage_intermediates)/userdata_image_info.txt $(INSTALLED_USERDATAIMAGE_TARGET) $(TARGET_OUT)
@@ -1836,8 +2329,8 @@
     $(call pretty,"Target userdata fs tarball: " \
                   "$(INSTALLED_USERDATATARBALL_TARGET)")
     $(MKTARBALL) $(FS_GET_STATS) \
-		$(PRODUCT_OUT) data $(PRIVATE_USERDATA_TAR) \
-		$(INSTALLED_USERDATATARBALL_TARGET) $(TARGET_OUT)
+	    $(PRODUCT_OUT) data $(PRIVATE_USERDATA_TAR) \
+	    $(INSTALLED_USERDATATARBALL_TARGET) $(TARGET_OUT)
 endef
 
 userdata_tar := $(PRODUCT_OUT)/userdata.tar
@@ -1901,7 +2394,7 @@
   $(call pretty,"Target cache fs image: $(INSTALLED_CACHEIMAGE_TARGET)")
   @mkdir -p $(TARGET_OUT_CACHE)
   @mkdir -p $(cacheimage_intermediates) && rm -rf $(cacheimage_intermediates)/cache_image_info.txt
-  $(call generate-userimage-prop-dictionary, $(cacheimage_intermediates)/cache_image_info.txt, skip_fsck=true)
+  $(call generate-image-prop-dictionary, $(cacheimage_intermediates)/cache_image_info.txt,cache,skip_fsck=true)
   $(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH \
       build/make/tools/releasetools/build_image.py \
       $(TARGET_OUT_CACHE) $(cacheimage_intermediates)/cache_image_info.txt $(INSTALLED_CACHEIMAGE_TARGET) $(TARGET_OUT)
@@ -1942,6 +2435,8 @@
     $(PDK_FUSION_SYMLINK_STAMP)
 
 INSTALLED_FILES_FILE_SYSTEMOTHER := $(PRODUCT_OUT)/installed-files-system-other.txt
+INSTALLED_FILES_JSON_SYSTEMOTHER := $(INSTALLED_FILES_FILE_SYSTEMOTHER:.txt=.json)
+$(INSTALLED_FILES_FILE_SYSTEMOTHER): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_SYSTEMOTHER)
 $(INSTALLED_FILES_FILE_SYSTEMOTHER) : $(INTERNAL_SYSTEMOTHERIMAGE_FILES) $(FILESLIST)
 	@echo Installed file list: $@
 	@mkdir -p $(dir $@)
@@ -1958,11 +2453,14 @@
   $(call pretty,"Target system_other fs image: $(INSTALLED_SYSTEMOTHERIMAGE_TARGET)")
   @mkdir -p $(TARGET_OUT_SYSTEM_OTHER)
   @mkdir -p $(systemotherimage_intermediates) && rm -rf $(systemotherimage_intermediates)/system_other_image_info.txt
-  $(call generate-userimage-prop-dictionary, $(systemotherimage_intermediates)/system_other_image_info.txt, skip_fsck=true)
+  $(call generate-image-prop-dictionary, $(systemotherimage_intermediates)/system_other_image_info.txt,system,skip_fsck=true)
   $(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH \
       build/make/tools/releasetools/build_image.py \
-      $(TARGET_OUT_SYSTEM_OTHER) $(systemotherimage_intermediates)/system_other_image_info.txt $(INSTALLED_SYSTEMOTHERIMAGE_TARGET) $(TARGET_OUT)
-  $(hide) $(call assert-max-image-size,$(INSTALLED_SYSTEMOTHERIMAGE_TARGET),$(BOARD_SYSTEMIMAGE_PARTITION_SIZE))
+      $(TARGET_OUT_SYSTEM_OTHER) $(systemotherimage_intermediates)/system_other_image_info.txt $(INSTALLED_SYSTEMOTHERIMAGE_TARGET) $(TARGET_OUT)\
+      $(systemotherimage_intermediates)/generated_system_other_image_info.txt
+  $(hide) $(call assert-max-image-size,$(INSTALLED_SYSTEMOTHERIMAGE_TARGET),\
+    $(call read-image-prop-dictionary,\
+      $(systemotherimage_intermediates)/generated_system_other_image_info.txt,system_size))
 endef
 
 # We just build this directly to the install location.
@@ -1989,10 +2487,38 @@
       $(ALL_PDK_FUSION_FILES)) \
     $(PDK_FUSION_SYMLINK_STAMP)
 
+# Final Vendor VINTF manifest including fragments. This is not assembled
+# on the device because it depends on everything in a given device
+# image which defines a vintf_fragment.
+ifdef BUILT_VENDOR_MANIFEST
+BUILT_ASSEMBLED_VENDOR_MANIFEST := $(PRODUCT_OUT)/verified_assembled_vendor_manifest.xml
+ifeq (true,$(strip $(PRODUCT_ENFORCE_VINTF_MANIFEST)))
+ifdef DEVICE_FRAMEWORK_COMPATIBILITY_MATRIX_FILE
+# TODO(b/65028233): turn this on globally
+$(BUILT_ASSEMBLED_VENDOR_MANIFEST): PRIVATE_SYSTEM_ASSEMBLE_VINTF_ENV_VARS := VINTF_ENFORCE_NO_UNUSED_HALS=true
+endif # DEVICE_FRAMEWORK_COMPATIBILITY_MATRIX_FILE
+endif # PRODUCT_ENFORCE_VINTF_MANIFEST
+$(BUILT_ASSEMBLED_VENDOR_MANIFEST): $(HOST_OUT_EXECUTABLES)/assemble_vintf
+$(BUILT_ASSEMBLED_VENDOR_MANIFEST): $(BUILT_SYSTEM_MATRIX)
+$(BUILT_ASSEMBLED_VENDOR_MANIFEST): $(BUILT_VENDOR_MANIFEST)
+$(BUILT_ASSEMBLED_VENDOR_MANIFEST): $(INTERNAL_VENDORIMAGE_FILES)
+	@echo "Verifying vendor VINTF manifest."
+	PRODUCT_ENFORCE_VINTF_MANIFEST=$(PRODUCT_ENFORCE_VINTF_MANIFEST) \
+	$(PRIVATE_SYSTEM_ASSEMBLE_VINTF_ENV_VARS) \
+	$(HOST_OUT_EXECUTABLES)/assemble_vintf \
+	    -c $(BUILT_SYSTEM_MATRIX) \
+	    -i $(BUILT_VENDOR_MANIFEST) \
+	    $$([ -d $(TARGET_OUT_VENDOR)/etc/vintf/manifest ] && \
+	        find $(TARGET_OUT_VENDOR)/etc/vintf/manifest -type f -name "*.xml" | \
+	        sed "s/^/-i /" | tr '\n' ' ') -o $@
+endif # BUILT_VENDOR_MANIFEST
+
 # platform.zip depends on $(INTERNAL_VENDORIMAGE_FILES).
 $(INSTALLED_PLATFORM_ZIP) : $(INTERNAL_VENDORIMAGE_FILES)
 
 INSTALLED_FILES_FILE_VENDOR := $(PRODUCT_OUT)/installed-files-vendor.txt
+INSTALLED_FILES_JSON_VENDOR := $(INSTALLED_FILES_FILE_VENDOR:.txt=.json)
+$(INSTALLED_FILES_FILE_VENDOR): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_VENDOR)
 $(INSTALLED_FILES_FILE_VENDOR) : $(INTERNAL_VENDORIMAGE_FILES) $(FILESLIST)
 	@echo Installed file list: $@
 	@mkdir -p $(dir $@)
@@ -2006,18 +2532,25 @@
 define build-vendorimage-target
   $(call pretty,"Target vendor fs image: $(INSTALLED_VENDORIMAGE_TARGET)")
   @mkdir -p $(TARGET_OUT_VENDOR)
+  $(call create-vendor-odm-symlink)
   @mkdir -p $(vendorimage_intermediates) && rm -rf $(vendorimage_intermediates)/vendor_image_info.txt
-  $(call generate-userimage-prop-dictionary, $(vendorimage_intermediates)/vendor_image_info.txt, skip_fsck=true)
+  $(call generate-image-prop-dictionary, $(vendorimage_intermediates)/vendor_image_info.txt,vendor,skip_fsck=true)
   $(if $(BOARD_VENDOR_KERNEL_MODULES), \
     $(call build-image-kernel-modules,$(BOARD_VENDOR_KERNEL_MODULES),$(TARGET_OUT_VENDOR),vendor/,$(call intermediates-dir-for,PACKAGING,depmod_vendor)))
   $(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH \
       build/make/tools/releasetools/build_image.py \
-      $(TARGET_OUT_VENDOR) $(vendorimage_intermediates)/vendor_image_info.txt $(INSTALLED_VENDORIMAGE_TARGET) $(TARGET_OUT)
-  $(hide) $(call assert-max-image-size,$(INSTALLED_VENDORIMAGE_TARGET),$(BOARD_VENDORIMAGE_PARTITION_SIZE))
+      $(TARGET_OUT_VENDOR) $(vendorimage_intermediates)/vendor_image_info.txt $(INSTALLED_VENDORIMAGE_TARGET) $(TARGET_OUT) \
+      $(vendorimage_intermediates)/generated_vendor_image_info.txt
+  $(hide) $(call assert-max-image-size,$(INSTALLED_VENDORIMAGE_TARGET),\
+      $(call read-image-prop-dictionary,\
+          $(vendorimage_intermediates)/generated_vendor_image_info.txt,vendor_size))
 endef
 
 # We just build this directly to the install location.
 INSTALLED_VENDORIMAGE_TARGET := $(BUILT_VENDORIMAGE_TARGET)
+ifdef BUILT_VENDOR_MANIFEST
+$(INSTALLED_VENDORIMAGE_TARGET): $(BUILT_ASSEMBLED_VENDOR_MANIFEST)
+endif
 $(INSTALLED_VENDORIMAGE_TARGET): $(INTERNAL_USERIMAGES_DEPS) $(INTERNAL_VENDORIMAGE_FILES) $(INSTALLED_FILES_FILE_VENDOR) $(BUILD_IMAGE_SRCS) $(DEPMOD) $(BOARD_VENDOR_KERNEL_MODULES)
 	$(build-vendorimage-target)
 
@@ -2045,6 +2578,8 @@
 $(INSTALLED_PLATFORM_ZIP) : $(INTERNAL_PRODUCTIMAGE_FILES)
 
 INSTALLED_FILES_FILE_PRODUCT := $(PRODUCT_OUT)/installed-files-product.txt
+INSTALLED_FILES_JSON_PRODUCT := $(INSTALLED_FILES_FILE_PRODUCT:.txt=.json)
+$(INSTALLED_FILES_FILE_PRODUCT): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_PRODUCT)
 $(INSTALLED_FILES_FILE_PRODUCT) : $(INTERNAL_PRODUCTIMAGE_FILES) $(FILESLIST)
 	@echo Installed file list: $@
 	@mkdir -p $(dir $@)
@@ -2059,11 +2594,14 @@
   $(call pretty,"Target product fs image: $(INSTALLED_PRODUCTIMAGE_TARGET)")
   @mkdir -p $(TARGET_OUT_PRODUCT)
   @mkdir -p $(productimage_intermediates) && rm -rf $(productimage_intermediates)/product_image_info.txt
-  $(call generate-userimage-prop-dictionary, $(productimage_intermediates)/product_image_info.txt, skip_fsck=true)
+  $(call generate-image-prop-dictionary, $(productimage_intermediates)/product_image_info.txt,product,skip_fsck=true)
   $(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH \
       ./build/tools/releasetools/build_image.py \
-      $(TARGET_OUT_PRODUCT) $(productimage_intermediates)/product_image_info.txt $(INSTALLED_PRODUCTIMAGE_TARGET) $(TARGET_OUT)
-  $(hide) $(call assert-max-image-size,$(INSTALLED_PRODUCTIMAGE_TARGET),$(BOARD_PRODUCTIMAGE_PARTITION_SIZE))
+      $(TARGET_OUT_PRODUCT) $(productimage_intermediates)/product_image_info.txt $(INSTALLED_PRODUCTIMAGE_TARGET) $(TARGET_OUT) \
+      $(productimage_intermediates)/generated_product_image_info.txt
+  $(hide) $(call assert-max-image-size,$(INSTALLED_PRODUCTIMAGE_TARGET),\
+      $(call read-image-prop-dictionary,\
+          $(productimage_intermediates)/generated_product_image_info.txt,product_size))
 endef
 
 # We just build this directly to the install location.
@@ -2083,6 +2621,117 @@
 endif
 
 # -----------------------------------------------------------------
+# product_services partition image
+ifdef BOARD_PRODUCT_SERVICESIMAGE_FILE_SYSTEM_TYPE
+INTERNAL_PRODUCT_SERVICESIMAGE_FILES := \
+    $(filter $(TARGET_OUT_PRODUCT_SERVICES)/%,\
+      $(ALL_DEFAULT_INSTALLED_MODULES)\
+      $(ALL_PDK_FUSION_FILES)) \
+    $(PDK_FUSION_SYMLINK_STAMP)
+
+# platform.zip depends on $(INTERNAL_PRODUCT_SERVICESIMAGE_FILES).
+$(INSTALLED_PLATFORM_ZIP) : $(INTERNAL_PRODUCT_SERVICESIMAGE_FILES)
+
+INSTALLED_FILES_FILE_PRODUCT_SERVICES := $(PRODUCT_OUT)/installed-files-product_services.txt
+INSTALLED_FILES_JSON_PRODUCT_SERVICES := $(INSTALLED_FILES_FILE_PRODUCT_SERVICES:.txt=.json)
+$(INSTALLED_FILES_FILE_PRODUCT_SERVICES): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_PRODUCT_SERVICES)
+$(INSTALLED_FILES_FILE_PRODUCT_SERVICES) : $(INTERNAL_PRODUCT_SERVICESIMAGE_FILES) $(FILESLIST)
+	@echo Installed file list: $@
+	@mkdir -p $(dir $@)
+	@rm -f $@
+	$(hide) $(FILESLIST) $(TARGET_OUT_PRODUCT_SERVICES) > $(@:.txt=.json)
+	$(hide) build/tools/fileslist_util.py -c $(@:.txt=.json) > $@
+
+product_servicesimage_intermediates := \
+    $(call intermediates-dir-for,PACKAGING,product_services)
+BUILT_PRODUCT_SERVICESIMAGE_TARGET := $(PRODUCT_OUT)/product_services.img
+define build-product_servicesimage-target
+  $(call pretty,"Target product_services fs image: $(INSTALLED_PRODUCT_SERVICESIMAGE_TARGET)")
+  @mkdir -p $(TARGET_OUT_PRODUCT_SERVICES)
+  @mkdir -p $(product_servicesimage_intermediates) && rm -rf $(product_servicesimage_intermediates)/product_services_image_info.txt
+  $(call generate-image-prop-dictionary, $(product_servicesimage_intermediates)/product_services_image_info.txt,product_services, skip_fsck=true)
+  $(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH \
+      ./build/tools/releasetools/build_image.py \
+      $(TARGET_OUT_PRODUCT_SERVICES) $(product_servicesimage_intermediates)/product_services_image_info.txt $(INSTALLED_PRODUCT_SERVICESIMAGE_TARGET) $(TARGET_OUT) \
+      $(product_servicesimage_intermediates)/generated_product_services_image_info.txt
+  $(hide) $(call assert-max-image-size,$(INSTALLED_PRODUCT_SERVICESIMAGE_TARGET),\
+      $(call read-image-prop-dictionary,\
+          $(product_servicesimage_intermediates)/generated_product_services_image_info.txt,product_services_size))
+endef
+
+# We just build this directly to the install location.
+INSTALLED_PRODUCT_SERVICESIMAGE_TARGET := $(BUILT_PRODUCT_SERVICESIMAGE_TARGET)
+$(INSTALLED_PRODUCT_SERVICESIMAGE_TARGET): $(INTERNAL_USERIMAGES_DEPS) $(INTERNAL_PRODUCT_SERVICESIMAGE_FILES) $(INSTALLED_FILES_FILE_PRODUCT_SERVICES) $(BUILD_IMAGE_SRCS)
+	$(build-product_servicesimage-target)
+
+.PHONY: productservicesimage-nodeps psnod
+productservicesimage-nodeps psnod: | $(INTERNAL_USERIMAGES_DEPS)
+	$(build-product_servicesimage-target)
+
+sync: $(INTERNAL_PRODUCT_SERVICESIMAGE_FILES)
+
+else ifdef BOARD_PREBUILT_PRODUCT_SERVICESIMAGE
+INSTALLED_PRODUCT_SERVICESIMAGE_TARGET := $(PRODUCT_OUT)/product_services.img
+$(eval $(call copy-one-file,$(BOARD_PREBUILT_PRODUCT_SERVICESIMAGE),$(INSTALLED_PRODUCT_SERVICESIMAGE_TARGET)))
+endif
+
+# -----------------------------------------------------------------
+# odm partition image
+ifdef BOARD_ODMIMAGE_FILE_SYSTEM_TYPE
+INTERNAL_ODMIMAGE_FILES := \
+    $(filter $(TARGET_OUT_ODM)/%,\
+      $(ALL_DEFAULT_INSTALLED_MODULES)\
+      $(ALL_PDK_FUSION_FILES)) \
+    $(PDK_FUSION_SYMLINK_STAMP)
+# platform.zip depends on $(INTERNAL_ODMIMAGE_FILES).
+$(INSTALLED_PLATFORM_ZIP) : $(INTERNAL_ODMIMAGE_FILES)
+
+INSTALLED_FILES_FILE_ODM := $(PRODUCT_OUT)/installed-files-odm.txt
+INSTALLED_FILES_JSON_ODM := $(INSTALLED_FILES_FILE_ODM:.txt=.json)
+$(INSTALLED_FILES_FILE_ODM): .KATI_IMPLICIT_OUTPUTS := $(INSTALLED_FILES_JSON_ODM)
+$(INSTALLED_FILES_FILE_ODM) : $(INTERNAL_ODMIMAGE_FILES) $(FILESLIST)
+	@echo Installed file list: $@
+	@mkdir -p $(dir $@)
+	@rm -f $@
+	$(hide) $(FILESLIST) $(TARGET_OUT_ODM) > $(@:.txt=.json)
+	$(hide) build/tools/fileslist_util.py -c $(@:.txt=.json) > $@
+
+odmimage_intermediates := \
+    $(call intermediates-dir-for,PACKAGING,odm)
+BUILT_ODMIMAGE_TARGET := $(PRODUCT_OUT)/odm.img
+define build-odmimage-target
+  $(call pretty,"Target odm fs image: $(INSTALLED_ODMIMAGE_TARGET)")
+  @mkdir -p $(TARGET_OUT_ODM)
+  @mkdir -p $(odmimage_intermediates) && rm -rf $(odmimage_intermediates)/odm_image_info.txt
+  $(call generate-userimage-prop-dictionary, $(odmimage_intermediates)/odm_image_info.txt, skip_fsck=true)
+  $(if $(BOARD_ODM_KERNEL_MODULES), \
+    $(call build-image-kernel-modules,$(BOARD_ODM_KERNEL_MODULES),$(TARGET_OUT_ODM),odm/,$(call intermediates-dir-for,PACKAGING,depmod_odm)))
+  $(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH \
+      ./build/tools/releasetools/build_image.py \
+      $(TARGET_OUT_ODM) $(odmimage_intermediates)/odm_image_info.txt $(INSTALLED_ODMIMAGE_TARGET) $(TARGET_OUT) \
+	  $(odmimage_intermediates)/generated_odm_image_info.txt
+  $(hide) $(call assert-max-image-size,$(INSTALLED_ODMIMAGE_TARGET),\
+      $(call read-image-prop-dictionary,\
+          $(odmimage_intermediates)/generated_odm_image_info.txt,odm_size))
+endef
+
+# We just build this directly to the install location.
+INSTALLED_ODMIMAGE_TARGET := $(BUILT_ODMIMAGE_TARGET)
+$(INSTALLED_ODMIMAGE_TARGET): $(INTERNAL_USERIMAGES_DEPS) $(INTERNAL_ODMIMAGE_FILES) $(INSTALLED_FILES_FILE_ODM) $(BUILD_IMAGE_SRCS) $(DEPMOD) $(BOARD_ODM_KERNEL_MODULES)
+	$(build-odmimage-target)
+
+.PHONY: odmimage-nodeps onod
+odmimage-nodeps onod: | $(INTERNAL_USERIMAGES_DEPS) $(DEPMOD)
+	$(build-odmimage-target)
+
+sync: $(INTERNAL_ODMIMAGE_FILES)
+
+else ifdef BOARD_PREBUILT_ODMIMAGE
+INSTALLED_ODMIMAGE_TARGET := $(PRODUCT_OUT)/odm.img
+$(eval $(call copy-one-file,$(BOARD_PREBUILT_ODMIMAGE),$(INSTALLED_ODMIMAGE_TARGET)))
+endif
+
+# -----------------------------------------------------------------
 # dtbo image
 ifdef BOARD_PREBUILT_DTBOIMAGE
 INSTALLED_DTBOIMAGE_TARGET := $(PRODUCT_OUT)/dtbo.img
@@ -2091,16 +2740,24 @@
 $(INSTALLED_DTBOIMAGE_TARGET): $(BOARD_PREBUILT_DTBOIMAGE) $(AVBTOOL) $(BOARD_AVB_DTBO_KEY_PATH)
 	cp $(BOARD_PREBUILT_DTBOIMAGE) $@
 	$(AVBTOOL) add_hash_footer \
-		--image $@ \
-		--partition_size $(BOARD_DTBOIMG_PARTITION_SIZE) \
-		--partition_name dtbo $(INTERNAL_AVB_DTBO_SIGNING_ARGS) \
-		$(BOARD_AVB_DTBO_ADD_HASH_FOOTER_ARGS)
+	    --image $@ \
+	    --partition_size $(BOARD_DTBOIMG_PARTITION_SIZE) \
+	    --partition_name dtbo $(INTERNAL_AVB_DTBO_SIGNING_ARGS) \
+	    $(BOARD_AVB_DTBO_ADD_HASH_FOOTER_ARGS)
 else
 $(INSTALLED_DTBOIMAGE_TARGET): $(BOARD_PREBUILT_DTBOIMAGE)
 	cp $(BOARD_PREBUILT_DTBOIMAGE) $@
 endif
 
-endif
+endif # BOARD_PREBUILT_DTBOIMAGE
+
+# Returns a list of image targets corresponding to the given list of partitions. For example, it
+# returns "$(INSTALLED_PRODUCTIMAGE_TARGET)" for "product", or "$(INSTALLED_SYSTEMIMAGE_TARGET)
+# $(INSTALLED_VENDORIMAGE_TARGET)" for "system vendor".
+# (1): list of partitions like "system", "vendor" or "system product product_services".
+define images-for-partitions
+$(strip $(foreach item,$(1),$(INSTALLED_$(call to-upper,$(item))IMAGE_TARGET)))
+endef
 
 # -----------------------------------------------------------------
 # vbmeta image
@@ -2117,8 +2774,14 @@
 BOARD_AVB_KEY_PATH := external/avb/test/data/testkey_rsa4096.pem
 endif
 
-INTERNAL_AVB_SIGNING_ARGS := \
-    --algorithm $(BOARD_AVB_ALGORITHM) --key $(BOARD_AVB_KEY_PATH)
+INTERNAL_AVB_PARTITIONS_IN_CHAINED_VBMETA_IMAGES := \
+    $(BOARD_AVB_VBMETA_SYSTEM) \
+    $(BOARD_AVB_VBMETA_VENDOR)
+
+# Not allowing the same partition to appear in multiple groups.
+ifneq ($(words $(sort $(INTERNAL_AVB_PARTITIONS_IN_CHAINED_VBMETA_IMAGES))),$(words $(INTERNAL_AVB_PARTITIONS_IN_CHAINED_VBMETA_IMAGES)))
+  $(error BOARD_AVB_VBMETA_SYSTEM and BOARD_AVB_VBMETA_VENDOR cannot have duplicates)
+endif
 
 BOOT_FOOTER_ARGS := BOARD_AVB_BOOT_ADD_HASH_FOOTER_ARGS
 DTBO_FOOTER_ARGS := BOARD_AVB_DTBO_ADD_HASH_FOOTER_ARGS
@@ -2126,12 +2789,14 @@
 VENDOR_FOOTER_ARGS := BOARD_AVB_VENDOR_ADD_HASHTREE_FOOTER_ARGS
 RECOVERY_FOOTER_ARGS := BOARD_AVB_RECOVERY_ADD_HASH_FOOTER_ARGS
 PRODUCT_FOOTER_ARGS := BOARD_AVB_PRODUCT_ADD_HASHTREE_FOOTER_ARGS
+PRODUCT_SERVICES_FOOTER_ARGS := BOARD_AVB_PRODUCT_SERVICES_ADD_HASHTREE_FOOTER_ARGS
+ODM_FOOTER_ARGS := BOARD_AVB_ODM_ADD_HASHTREE_FOOTER_ARGS
 
-# Check and set required build variables for a chain partition.
-# $(1): the partition to enable AVB chain, e.g., BOOT or SYSTEM.
-define check-and-set-avb-chain-args
-$(eval PART := $(1))
-$(eval part=$(call to-lower,$(PART)))
+# Helper function that checks and sets required build variables for an AVB chained partition.
+# $(1): the partition to enable AVB chain, e.g., boot or system or vbmeta_system.
+define _check-and-set-avb-chain-args
+$(eval part := $(1))
+$(eval PART=$(call to-upper,$(part)))
 
 $(eval _key_path := BOARD_AVB_$(PART)_KEY_PATH)
 $(eval _signing_algorithm := BOARD_AVB_$(PART)_ALGORITHM)
@@ -2150,62 +2815,67 @@
 $(eval INTERNAL_AVB_MAKE_VBMETA_IMAGE_ARGS += \
     --chain_partition $(part):$($(_rollback_index_location)):$(AVB_CHAIN_KEY_DIR)/$(part).avbpubkey)
 
-# Set rollback_index via footer args
-$(eval _footer_args := $(PART)_FOOTER_ARGS)
-$(eval $($(_footer_args)) += --rollback_index $($(_rollback_index)))
+# Set rollback_index via footer args for non-chained vbmeta image. Chained vbmeta image will pick up
+# the index via a separate flag (e.g. BOARD_AVB_VBMETA_SYSTEM_ROLLBACK_INDEX).
+$(if $(filter $(part),$(part:vbmeta_%=%)),\
+    $(eval _footer_args := $(PART)_FOOTER_ARGS) \
+    $(eval $($(_footer_args)) += --rollback_index $($(_rollback_index))))
 endef
 
-ifdef BOARD_AVB_BOOT_KEY_PATH
-$(eval $(call check-and-set-avb-chain-args,BOOT))
-else
-INTERNAL_AVB_MAKE_VBMETA_IMAGE_ARGS += \
-    --include_descriptors_from_image $(INSTALLED_BOOTIMAGE_TARGET)
+# Checks and sets the required build variables for an AVB partition. The partition will be
+# configured as a chained partition, if BOARD_AVB_<partition>_KEY_PATH is defined. Otherwise the
+# image descriptor will be included into vbmeta.img, unless it has been already added to any chained
+# VBMeta image.
+# $(1): Partition name, e.g. boot or system.
+define check-and-set-avb-args
+$(eval _in_chained_vbmeta := $(filter $(1),$(INTERNAL_AVB_PARTITIONS_IN_CHAINED_VBMETA_IMAGES)))
+$(if $(BOARD_AVB_$(call to-upper,$(1))_KEY_PATH),\
+    $(if $(_in_chained_vbmeta),\
+        $(error Chaining partition "$(1)" in chained VBMeta image is not supported)) \
+    $(call _check-and-set-avb-chain-args,$(1)),\
+    $(if $(_in_chained_vbmeta),,\
+        $(eval INTERNAL_AVB_MAKE_VBMETA_IMAGE_ARGS += \
+            --include_descriptors_from_image $(call images-for-partitions,$(1)))))
+endef
+
+ifdef INSTALLED_BOOTIMAGE_TARGET
+$(eval $(call check-and-set-avb-args,boot))
 endif
 
-ifdef BOARD_AVB_SYSTEM_KEY_PATH
-$(eval $(call check-and-set-avb-chain-args,SYSTEM))
-else
-INTERNAL_AVB_MAKE_VBMETA_IMAGE_ARGS += \
-    --include_descriptors_from_image $(INSTALLED_SYSTEMIMAGE)
-endif
+$(eval $(call check-and-set-avb-args,system))
 
 ifdef INSTALLED_VENDORIMAGE_TARGET
-ifdef BOARD_AVB_VENDOR_KEY_PATH
-$(eval $(call check-and-set-avb-chain-args,VENDOR))
-else
-INTERNAL_AVB_MAKE_VBMETA_IMAGE_ARGS += \
-    --include_descriptors_from_image $(INSTALLED_VENDORIMAGE_TARGET)
-endif
+$(eval $(call check-and-set-avb-args,vendor))
 endif
 
 ifdef INSTALLED_PRODUCTIMAGE_TARGET
-ifdef BOARD_AVB_PRODUCT_KEY_PATH
-$(eval $(call check-and-set-avb-chain-args,PRODUCT))
-else
-INTERNAL_AVB_MAKE_VBMETA_IMAGE_ARGS += \
-    --include_descriptors_from_image $(INSTALLED_PRODUCTIMAGE_TARGET)
+$(eval $(call check-and-set-avb-args,product))
 endif
+
+ifdef INSTALLED_PRODUCT_SERVICESIMAGE_TARGET
+$(eval $(call check-and-set-avb-args,product_services))
+endif
+
+ifdef INSTALLED_ODMIMAGE_TARGET
+$(eval $(call check-and-set-avb-args,odm))
 endif
 
 ifdef INSTALLED_DTBOIMAGE_TARGET
-ifdef BOARD_AVB_DTBO_KEY_PATH
-$(eval $(call check-and-set-avb-chain-args,DTBO))
-else
-INTERNAL_AVB_MAKE_VBMETA_IMAGE_ARGS += \
-    --include_descriptors_from_image $(INSTALLED_DTBOIMAGE_TARGET)
-endif
+$(eval $(call check-and-set-avb-args,dtbo))
 endif
 
 ifdef INSTALLED_RECOVERYIMAGE_TARGET
-ifdef BOARD_AVB_RECOVERY_KEY_PATH
-$(eval $(call check-and-set-avb-chain-args,RECOVERY))
-else
-INTERNAL_AVB_MAKE_VBMETA_IMAGE_ARGS += \
-    --include_descriptors_from_image $(INSTALLED_RECOVERYIMAGE_TARGET)
-endif
+$(eval $(call check-and-set-avb-args,recovery))
 endif
 
-BOARD_AVB_MAKE_VBMETA_IMAGE_ARGS += --padding_size 4096
+# Not using INSTALLED_VBMETA_SYSTEMIMAGE_TARGET as it won't be set yet.
+ifdef BOARD_AVB_VBMETA_SYSTEM
+$(eval $(call check-and-set-avb-args,vbmeta_system))
+endif
+
+ifdef BOARD_AVB_VBMETA_VENDOR
+$(eval $(call check-and-set-avb-args,vbmeta_vendor))
+endif
 
 # Add kernel cmdline descriptor for kernel to mount system.img as root with
 # dm-verity. This works when system.img is either chained or not-chained:
@@ -2214,19 +2884,32 @@
 # - not-chained: The --include_descriptors_from_image option for make_vbmeta_image
 #   will include the kernel cmdline descriptor from system.img into vbmeta.img
 ifeq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true)
+ifeq ($(filter system, $(BOARD_SUPER_PARTITION_PARTITION_LIST)),)
 BOARD_AVB_SYSTEM_ADD_HASHTREE_FOOTER_ARGS += --setup_as_rootfs_from_kernel
 endif
+endif
+
+BOARD_AVB_MAKE_VBMETA_IMAGE_ARGS += --padding_size 4096
+BOARD_AVB_MAKE_VBMETA_SYSTEM_IMAGE_ARGS += --padding_size 4096
+BOARD_AVB_MAKE_VBMETA_VENDOR_IMAGE_ARGS += --padding_size 4096
+
+ifeq (eng,$(filter eng, $(TARGET_BUILD_VARIANT)))
+# We only need the flag in top-level vbmeta.img.
+BOARD_AVB_MAKE_VBMETA_IMAGE_ARGS += --set_hashtree_disabled_flag
+endif
 
 ifdef BOARD_AVB_ROLLBACK_INDEX
 BOARD_AVB_MAKE_VBMETA_IMAGE_ARGS += --rollback_index $(BOARD_AVB_ROLLBACK_INDEX)
 endif
 
-ifndef BOARD_BOOTIMAGE_PARTITION_SIZE
-  $(error BOARD_BOOTIMAGE_PARTITION_SIZE must be set for BOARD_AVB_ENABLE)
+ifdef BOARD_AVB_VBMETA_SYSTEM_ROLLBACK_INDEX
+BOARD_AVB_MAKE_VBMETA_SYSTEM_IMAGE_ARGS += \
+    --rollback_index $(BOARD_AVB_VBMETA_SYSTEM_ROLLBACK_INDEX)
 endif
 
-ifndef BOARD_SYSTEMIMAGE_PARTITION_SIZE
-  $(error BOARD_SYSTEMIMAGE_PARTITION_SIZE must be set for BOARD_AVB_ENABLE)
+ifdef BOARD_AVB_VBMETA_VENDOR_ROLLBACK_INDEX
+BOARD_AVB_MAKE_VBMETA_VENDOR_IMAGE_ARGS += \
+    --rollback_index $(BOARD_AVB_VBMETA_VENDOR_ROLLBACK_INDEX)
 endif
 
 # $(1): the directory to extract public keys to
@@ -2243,53 +2926,197 @@
   $(if $(BOARD_AVB_PRODUCT_KEY_PATH),\
     $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_PRODUCT_KEY_PATH) \
       --output $(1)/product.avbpubkey)
+  $(if $(BOARD_AVB_PRODUCT_SERVICES_KEY_PATH),\
+    $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_PRODUCT_SERVICES_KEY_PATH) \
+      --output $(1)/product_services.avbpubkey)
+  $(if $(BOARD_AVB_ODM_KEY_PATH),\
+    $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_ODM_KEY_PATH) \
+      --output $(1)/odm.avbpubkey)
   $(if $(BOARD_AVB_DTBO_KEY_PATH),\
     $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_DTBO_KEY_PATH) \
       --output $(1)/dtbo.avbpubkey)
   $(if $(BOARD_AVB_RECOVERY_KEY_PATH),\
     $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_RECOVERY_KEY_PATH) \
       --output $(1)/recovery.avbpubkey)
+  $(if $(BOARD_AVB_VBMETA_SYSTEM_KEY_PATH),\
+    $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_VBMETA_SYSTEM_KEY_PATH) \
+        --output $(1)/vbmeta_system.avbpubkey)
+  $(if $(BOARD_AVB_VBMETA_VENDOR_KEY_PATH),\
+    $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_VBMETA_VENDOR_KEY_PATH) \
+        --output $(1)/vbmeta_vendor.avbpubkey)
 endef
 
+# Builds a chained VBMeta image. This VBMeta image will contain the descriptors for the partitions
+# specified in BOARD_AVB_VBMETA_<NAME>. The built VBMeta image will be included into the top-level
+# vbmeta image as a chained partition. For example, if a target defines `BOARD_AVB_VBMETA_SYSTEM
+# := system product_services`, `vbmeta_system.img` will be created that includes the descriptors
+# for `system.img` and `product_services.img`. `vbmeta_system.img` itself will be included into
+# `vbmeta.img` as a chained partition.
+# $(1): VBMeta image name, such as "vbmeta_system", "vbmeta_vendor" etc.
+# $(2): Output filename.
+define build-chained-vbmeta-image
+  $(call pretty,"Target chained vbmeta image: $@")
+  $(hide) $(AVBTOOL) make_vbmeta_image \
+      $(INTERNAL_AVB_$(call to-upper,$(1))_SIGNING_ARGS) \
+      $(BOARD_AVB_MAKE_$(call to-upper,$(1))_IMAGE_ARGS) \
+      $(foreach image,$(BOARD_AVB_$(call to-upper,$(1))), \
+          --include_descriptors_from_image $(call images-for-partitions,$(image))) \
+      --output $@
+endef
+
+ifdef BOARD_AVB_VBMETA_SYSTEM
+INSTALLED_VBMETA_SYSTEMIMAGE_TARGET := $(PRODUCT_OUT)/vbmeta_system.img
+$(INSTALLED_VBMETA_SYSTEMIMAGE_TARGET): \
+	    $(AVBTOOL) \
+	    $(call images-for-partitions,$(BOARD_AVB_VBMETA_SYSTEM)) \
+	    $(BOARD_AVB_VBMETA_SYSTEM_KEY_PATH)
+	$(call build-chained-vbmeta-image,vbmeta_system)
+endif
+
+ifdef BOARD_AVB_VBMETA_VENDOR
+INSTALLED_VBMETA_VENDORIMAGE_TARGET := $(PRODUCT_OUT)/vbmeta_vendor.img
+$(INSTALLED_VBMETA_VENDORIMAGE_TARGET): \
+	    $(AVBTOOL) \
+	    $(call images-for-partitions,$(BOARD_AVB_VBMETA_VENDOR)) \
+	    $(BOARD_AVB_VBMETA_VENDOR_KEY_PATH)
+	$(call build-chained-vbmeta-image,vbmeta_vendor)
+endif
+
 define build-vbmetaimage-target
   $(call pretty,"Target vbmeta image: $(INSTALLED_VBMETAIMAGE_TARGET)")
   $(hide) mkdir -p $(AVB_CHAIN_KEY_DIR)
   $(call extract-avb-chain-public-keys, $(AVB_CHAIN_KEY_DIR))
   $(hide) $(AVBTOOL) make_vbmeta_image \
     $(INTERNAL_AVB_MAKE_VBMETA_IMAGE_ARGS) \
-    $(INTERNAL_AVB_SIGNING_ARGS) \
+    $(PRIVATE_AVB_VBMETA_SIGNING_ARGS) \
     $(BOARD_AVB_MAKE_VBMETA_IMAGE_ARGS) \
     --output $@
   $(hide) rm -rf $(AVB_CHAIN_KEY_DIR)
 endef
 
 INSTALLED_VBMETAIMAGE_TARGET := $(BUILT_VBMETAIMAGE_TARGET)
+$(INSTALLED_VBMETAIMAGE_TARGET): PRIVATE_AVB_VBMETA_SIGNING_ARGS := \
+    --algorithm $(BOARD_AVB_ALGORITHM) --key $(BOARD_AVB_KEY_PATH)
+
 $(INSTALLED_VBMETAIMAGE_TARGET): \
-		$(AVBTOOL) \
-		$(INSTALLED_BOOTIMAGE_TARGET) \
-		$(INSTALLED_SYSTEMIMAGE) \
-		$(INSTALLED_VENDORIMAGE_TARGET) \
-		$(INSTALLED_PRODUCTIMAGE_TARGET) \
-		$(INSTALLED_DTBOIMAGE_TARGET) \
-		$(INSTALLED_RECOVERYIMAGE_TARGET) \
-		$(BOARD_AVB_KEY_PATH)
+	    $(AVBTOOL) \
+	    $(INSTALLED_BOOTIMAGE_TARGET) \
+	    $(INSTALLED_SYSTEMIMAGE_TARGET) \
+	    $(INSTALLED_VENDORIMAGE_TARGET) \
+	    $(INSTALLED_PRODUCTIMAGE_TARGET) \
+	    $(INSTALLED_PRODUCT_SERVICESIMAGE_TARGET) \
+	    $(INSTALLED_ODMIMAGE_TARGET) \
+	    $(INSTALLED_DTBOIMAGE_TARGET) \
+	    $(INSTALLED_RECOVERYIMAGE_TARGET) \
+	    $(INSTALLED_VBMETA_SYSTEMIMAGE_TARGET) \
+	    $(INSTALLED_VBMETA_VENDORIMAGE_TARGET) \
+	    $(BOARD_AVB_VBMETA_SYSTEM_KEY_PATH) \
+	    $(BOARD_AVB_VBMETA_VENDOR_KEY_PATH) \
+	    $(BOARD_AVB_KEY_PATH)
 	$(build-vbmetaimage-target)
 
 .PHONY: vbmetaimage-nodeps
 vbmetaimage-nodeps:
 	$(build-vbmetaimage-target)
 
-else ifeq (true,$(BOARD_BUILD_DISABLED_VBMETAIMAGE))
-BUILT_DISABLED_VBMETAIMAGE := $(PRODUCT_OUT)/vbmeta.img
-
-INSTALLED_VBMETAIMAGE_TARGET := $(BUILT_DISABLED_VBMETAIMAGE)
-$(INSTALLED_VBMETAIMAGE_TARGET): $(AVBTOOL)
-	$(hide) $(AVBTOOL) make_vbmeta_image \
-	  --flag 2 --padding_size 4096 --output $@
-
 endif # BOARD_AVB_ENABLE
 
 # -----------------------------------------------------------------
+# Check image sizes <= size of super partition
+
+ifeq (,$(TARGET_BUILD_APPS))
+# Do not check for apps-only build
+
+ifeq (true,$(PRODUCT_BUILD_SUPER_PARTITION))
+
+# (1): list of items like "system", "vendor", "product", "product_services"
+# return: map each item into a command ( wrapped in $$() ) that reads the size
+define read-size-of-partitions
+$(foreach p,$(1),$(call read-image-prop-dictionary,$($(p)image_intermediates)/generated_$(p)_image_info.txt,$(p)_size))
+endef
+
+define super-slot-suffix
+$(if $(filter true,$(AB_OTA_UPDATER)),$(if $(filter true,$(PRODUCT_RETROFIT_DYNAMIC_PARTITIONS)),,_a))
+endef
+
+droid_targets: check-all-partition-sizes
+
+.PHONY: check-all-partition-sizes check-all-partition-sizes-nodeps
+
+# Add image dependencies so that generated_*_image_info.txt are written before checking.
+check-all-partition-sizes: $(call images-for-partitions,$(BOARD_SUPER_PARTITION_PARTITION_LIST))
+
+ifeq ($(PRODUCT_RETROFIT_DYNAMIC_PARTITIONS),true)
+# Check sum(super partition block devices) == super partition
+# Non-retrofit devices already defines BOARD_SUPER_PARTITION_SUPER_DEVICE_SIZE = BOARD_SUPER_PARTITION_SIZE
+define check-super-partition-size
+  size_list="$(foreach device,$(call to-upper,$(BOARD_SUPER_PARTITION_BLOCK_DEVICES)),$(BOARD_SUPER_PARTITION_$(device)_DEVICE_SIZE))"; \
+  sum_sizes_expr=$$(sed -e 's/ /+/g' <<< "$${size_list}"); \
+  max_size_expr="$(BOARD_SUPER_PARTITION_SIZE)"; \
+  if [ $$(( $${sum_sizes_expr} )) -ne $$(( $${max_size_expr} )) ]; then \
+    echo "The sum of super partition block device sizes is not equal to BOARD_SUPER_PARTITION_SIZE:"; \
+    echo $${sum_sizes_expr} '!=' $${max_size_expr}; \
+    exit 1; \
+  else \
+    echo "The sum of super partition block device sizes is equal to BOARD_SUPER_PARTITION_SIZE:"; \
+    echo $${sum_sizes_expr} '==' $${max_size_expr}; \
+  fi
+endef
+endif
+
+# $(1): human-readable max size string
+# $(2): max size expression
+# $(3): list of partition names
+define check-sum-of-partition-sizes
+  partition_size_list="$(call read-size-of-partitions,$(3))"; \
+  sum_sizes_expr=$$(sed -e 's/ /+/g' <<< "$${partition_size_list}"); \
+  if [ $$(( $${sum_sizes_expr} )) -gt $$(( $(2) )) ]; then \
+    echo "The sum of sizes of [$(strip $(3))] is larger than $(strip $(1)):"; \
+    echo $${sum_sizes_expr} '==' $$(( $${sum_sizes_expr} )) '>' "$(2)" '==' $$(( $(2) )); \
+    exit 1; \
+  else \
+    echo "The sum of sizes of [$(strip $(3))] is within $(strip $(1)):"; \
+    echo $${sum_sizes_expr} '==' $$(( $${sum_sizes_expr} )) '<=' "$(2)" '==' $$(( $(2) )); \
+  fi
+endef
+
+define check-all-partition-sizes-target
+  # Check sum(all partitions) <= super partition (/ 2 for A/B devices launched with dynamic partitions)
+  $(if $(BOARD_SUPER_PARTITION_SIZE),$(if $(BOARD_SUPER_PARTITION_PARTITION_LIST), \
+    $(call check-sum-of-partition-sizes,BOARD_SUPER_PARTITION_SIZE$(if $(call super-slot-suffix), / 2), \
+      $(BOARD_SUPER_PARTITION_SIZE)$(if $(call super-slot-suffix), / 2),$(BOARD_SUPER_PARTITION_PARTITION_LIST))))
+
+  # For each group, check sum(partitions in group) <= group size
+  $(foreach group,$(call to-upper,$(BOARD_SUPER_PARTITION_GROUPS)), \
+    $(if $(BOARD_$(group)_SIZE),$(if $(BOARD_$(group)_PARTITION_LIST), \
+      $(call check-sum-of-partition-sizes,BOARD_$(group)_SIZE,$(BOARD_$(group)_SIZE),$(BOARD_$(group)_PARTITION_LIST)))))
+
+  # Check sum(all group sizes) <= super partition (/ 2 for A/B devices launched with dynamic partitions)
+  if [[ ! -z $(BOARD_SUPER_PARTITION_SIZE) ]]; then \
+    group_size_list="$(foreach group,$(call to-upper,$(BOARD_SUPER_PARTITION_GROUPS)),$(BOARD_$(group)_SIZE))"; \
+    sum_sizes_expr=$$(sed -e 's/ /+/g' <<< "$${group_size_list}"); \
+    max_size_tail=$(if $(call super-slot-suffix)," / 2"); \
+    max_size_expr="$(BOARD_SUPER_PARTITION_SIZE)$${max_size_tail}"; \
+    if [ $$(( $${sum_sizes_expr} )) -gt $$(( $${max_size_expr} )) ]; then \
+      echo "The sum of sizes of [$(strip $(BOARD_SUPER_PARTITION_GROUPS))] is larger than BOARD_SUPER_PARTITION_SIZE$${max_size_tail}:"; \
+      echo $${sum_sizes_expr} '==' $$(( $${sum_sizes_expr} )) '>' $${max_size_expr} '==' $$(( $${max_size_expr} )); \
+      exit 1; \
+    else \
+      echo "The sum of sizes of [$(strip $(BOARD_SUPER_PARTITION_GROUPS))] is within BOARD_SUPER_PARTITION_SIZE$${max_size_tail}:"; \
+      echo $${sum_sizes_expr} '==' $$(( $${sum_sizes_expr} )) '<=' $${max_size_expr} '==' $$(( $${max_size_expr} )); \
+    fi \
+  fi
+endef
+
+check-all-partition-sizes check-all-partition-sizes-nodeps:
+	$(call check-all-partition-sizes-target)
+	$(call check-super-partition-size)
+
+endif # PRODUCT_BUILD_SUPER_PARTITION
+
+endif # TARGET_BUILD_APPS
+
+# -----------------------------------------------------------------
 # bring in the installer image generation defines if necessary
 ifeq ($(TARGET_USE_DISKINSTALLER),true)
 include bootable/diskinstaller/config.mk
@@ -2298,33 +3125,42 @@
 # -----------------------------------------------------------------
 # host tools needed to build dist and OTA packages
 
-build_ota_package := true
-ifeq ($(TARGET_SKIP_OTA_PACKAGE),true)
-build_ota_package := false
-endif
 ifeq ($(BUILD_OS),darwin)
-build_ota_package := false
-endif
-ifneq ($(strip $(SANITIZE_TARGET)),)
-build_ota_package := false
-endif
-ifeq ($(TARGET_PRODUCT),sdk)
-build_ota_package := false
-endif
-ifneq ($(filter generic%,$(TARGET_DEVICE)),)
-build_ota_package := false
-endif
-ifeq ($(TARGET_NO_KERNEL),true)
-build_ota_package := false
-endif
-ifeq ($(recovery_fstab),)
-build_ota_package := false
-endif
-ifeq ($(TARGET_BUILD_PDK),true)
-build_ota_package := false
+  build_ota_package := false
+  build_otatools_package := false
+else
+  # set build_ota_package, and allow opt-out below
+  build_ota_package := true
+  ifeq ($(TARGET_SKIP_OTA_PACKAGE),true)
+    build_ota_package := false
+  endif
+  ifneq (,$(filter address, $(SANITIZE_TARGET)))
+    build_ota_package := false
+  endif
+  ifeq ($(TARGET_PRODUCT),sdk)
+    build_ota_package := false
+  endif
+  ifneq ($(filter generic%,$(TARGET_DEVICE)),)
+    build_ota_package := false
+  endif
+  ifeq ($(TARGET_NO_KERNEL),true)
+    build_ota_package := false
+  endif
+  ifeq ($(recovery_fstab),)
+    build_ota_package := false
+  endif
+  ifeq ($(TARGET_BUILD_PDK),true)
+    build_ota_package := false
+  endif
+
+  # set build_otatools_package, and allow opt-out below
+  build_otatools_package := true
+  ifeq ($(TARGET_SKIP_OTATOOLS_PACKAGE),true)
+    build_otatools_package := false
+  endif
 endif
 
-ifeq ($(build_ota_package),true)
+ifeq ($(build_otatools_package),true)
 OTATOOLS :=  $(HOST_OUT_EXECUTABLES)/minigzip \
   $(HOST_OUT_EXECUTABLES)/aapt \
   $(HOST_OUT_EXECUTABLES)/checkvintf \
@@ -2334,13 +3170,13 @@
   $(HOST_OUT_EXECUTABLES)/zipalign \
   $(HOST_OUT_EXECUTABLES)/bsdiff \
   $(HOST_OUT_EXECUTABLES)/imgdiff \
-  $(HOST_OUT_JAVA_LIBRARIES)/dumpkey.jar \
   $(HOST_OUT_JAVA_LIBRARIES)/signapk.jar \
   $(HOST_OUT_JAVA_LIBRARIES)/BootSignature.jar \
   $(HOST_OUT_JAVA_LIBRARIES)/VeritySigner.jar \
   $(HOST_OUT_EXECUTABLES)/mke2fs \
-  $(HOST_OUT_EXECUTABLES)/mkuserimg_mke2fs.sh \
+  $(HOST_OUT_EXECUTABLES)/mkuserimg_mke2fs \
   $(HOST_OUT_EXECUTABLES)/e2fsdroid \
+  $(HOST_OUT_EXECUTABLES)/tune2fs \
   $(HOST_OUT_EXECUTABLES)/mksquashfsimage.sh \
   $(HOST_OUT_EXECUTABLES)/mksquashfs \
   $(HOST_OUT_EXECUTABLES)/mkf2fsuserimg.sh \
@@ -2348,7 +3184,6 @@
   $(HOST_OUT_EXECUTABLES)/sload_f2fs \
   $(HOST_OUT_EXECUTABLES)/simg2img \
   $(HOST_OUT_EXECUTABLES)/e2fsck \
-  $(HOST_OUT_EXECUTABLES)/build_verity_tree \
   $(HOST_OUT_EXECUTABLES)/generate_verity_key \
   $(HOST_OUT_EXECUTABLES)/verity_signer \
   $(HOST_OUT_EXECUTABLES)/verity_verifier \
@@ -2359,9 +3194,13 @@
   $(HOST_OUT_EXECUTABLES)/brillo_update_payload \
   $(HOST_OUT_EXECUTABLES)/lib/shflags/shflags \
   $(HOST_OUT_EXECUTABLES)/delta_generator \
+  $(HOST_OUT_EXECUTABLES)/care_map_generator \
+  $(LPMAKE) \
   $(AVBTOOL) \
   $(BLK_ALLOC_TO_BASE_FS) \
-  $(BROTLI)
+  $(BROTLI) \
+  $(BUILD_VERITY_METADATA) \
+  $(BUILD_VERITY_TREE)
 
 ifeq (true,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VBOOT))
 OTATOOLS += \
@@ -2397,7 +3236,9 @@
   $(HOST_LIBRARY_PATH)/libsparse-host$(HOST_SHLIB_SUFFIX) \
   $(HOST_LIBRARY_PATH)/libbase$(HOST_SHLIB_SUFFIX) \
   $(HOST_LIBRARY_PATH)/libpcre2$(HOST_SHLIB_SUFFIX) \
-  $(HOST_LIBRARY_PATH)/libbrotli$(HOST_SHLIB_SUFFIX)
+  $(HOST_LIBRARY_PATH)/libbrotli$(HOST_SHLIB_SUFFIX) \
+  $(HOST_LIBRARY_PATH)/liblp$(HOST_SHLIB_SUFFIX) \
+  $(HOST_LIBRARY_PATH)/libext4_utils$(HOST_SHLIB_SUFFIX)
 
 
 .PHONY: otatools
@@ -2407,38 +3248,47 @@
 $(BUILT_OTATOOLS_PACKAGE): zip_root := $(call intermediates-dir-for,PACKAGING,otatools)/otatools
 
 OTATOOLS_DEPS := \
-  system/extras/verity/build_verity_metadata.py \
   system/extras/ext4_utils/mke2fs.conf \
+  $(sort $(shell find build/target/product/security -type f -name "*.x509.pem" -o -name "*.pk8" -o \
+      -name verity_key))
+
+ifneq (,$(wildcard device))
+OTATOOLS_DEPS += \
+  $(sort $(shell find device $(wildcard vendor) -type f -name "*.pk8" -o -name "verifiedboot*" -o \
+      -name "*.x509.pem" -o -name "oem*.prop"))
+endif
+ifneq (,$(wildcard external/avb))
+OTATOOLS_DEPS += \
   $(sort $(shell find external/avb/test/data -type f -name "testkey_*.pem" -o \
-      -name "atx_metadata.bin")) \
-  $(sort $(shell find system/update_engine/scripts -name \*.pyc -prune -o -type f -print)) \
-  $(sort $(shell find build/target/product/security -type f -name \*.x509.pem -o -name \*.pk8 -o \
-      -name verity_key)) \
-  $(sort $(shell find device $(wildcard vendor) -type f -name \*.pk8 -o -name verifiedboot\* -o \
-      -name \*.x509.pem -o -name oem\*.prop))
+      -name "atx_metadata.bin"))
+endif
+ifneq (,$(wildcard system/update_engine))
+OTATOOLS_DEPS += \
+  $(sort $(shell find system/update_engine/scripts -name "*.pyc" -prune -o -type f -print))
+endif
 
 OTATOOLS_RELEASETOOLS := \
-  $(sort $(shell find build/make/tools/releasetools -name \*.pyc -prune -o -type f))
+  $(sort $(shell find build/make/tools/releasetools -name "*.pyc" -prune -o -type f))
 
 ifeq (true,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VBOOT))
 OTATOOLS_DEPS += \
   $(sort $(shell find external/vboot_reference/tests/devkeys -type f))
 endif
 
-$(BUILT_OTATOOLS_PACKAGE): $(OTATOOLS) $(OTATOOLS_DEPS) $(OTATOOLS_RELEASETOOLS) | $(ACP)
+$(BUILT_OTATOOLS_PACKAGE): $(OTATOOLS) $(OTATOOLS_DEPS) $(OTATOOLS_RELEASETOOLS) $(SOONG_ZIP)
 	@echo "Package OTA tools: $@"
 	$(hide) rm -rf $@ $(zip_root)
 	$(hide) mkdir -p $(dir $@) $(zip_root)/bin $(zip_root)/framework $(zip_root)/releasetools
 	$(call copy-files-with-structure,$(OTATOOLS),$(HOST_OUT)/,$(zip_root))
-	$(hide) $(ACP) -r -d -p build/make/tools/releasetools/* $(zip_root)/releasetools
+	$(hide) cp -r -d -p build/make/tools/releasetools/* $(zip_root)/releasetools
 	$(hide) rm -rf $@ $(zip_root)/releasetools/*.pyc
-	$(hide) (cd $(zip_root) && zip -qryX $(abspath $@) *)
-	$(hide) echo $(OTATOOLS_DEPS) | xargs zip -qryX $(abspath $@)>/dev/null || true
+	$(hide) $(SOONG_ZIP) -o $@ -C $(zip_root) -D $(zip_root) \
+	  -C . $(addprefix -f ,$(OTATOOLS_DEPS))
 
 .PHONY: otatools-package
 otatools-package: $(BUILT_OTATOOLS_PACKAGE)
 
-endif # build_ota_package
+endif # build_otatools_package
 
 # -----------------------------------------------------------------
 # A zip of the directories that map to the target filesystem.
@@ -2455,7 +3305,7 @@
 BUILT_TARGET_FILES_PACKAGE := $(intermediates)/$(name).zip
 $(BUILT_TARGET_FILES_PACKAGE): intermediates := $(intermediates)
 $(BUILT_TARGET_FILES_PACKAGE): \
-		zip_root := $(intermediates)/$(name)
+	    zip_root := $(intermediates)/$(name)
 
 # $(1): Directory to copy
 # $(2): Location to copy it to
@@ -2470,7 +3320,7 @@
 built_ota_tools :=
 
 # We can't build static executables when SANITIZE_TARGET=address
-ifeq ($(strip $(SANITIZE_TARGET)),)
+ifeq (,$(filter address, $(SANITIZE_TARGET)))
 built_ota_tools += \
     $(call intermediates-dir-for,EXECUTABLES,updater,,,$(TARGET_PREFER_32_BIT))/updater
 endif
@@ -2506,10 +3356,6 @@
 endif
 
 ifeq ($(AB_OTA_UPDATER),true)
-  ifdef BRILLO_VENDOR_PARTITIONS
-    $(BUILT_TARGET_FILES_PACKAGE): $(foreach p,$(BRILLO_VENDOR_PARTITIONS),\
-                                     $(call word-colon,1,$(p))/$(call word-colon,2,$(p)))
-  endif
   ifdef OSRELEASED_DIRECTORY
     $(BUILT_TARGET_FILES_PACKAGE): $(TARGET_OUT_OEM)/$(OSRELEASED_DIRECTORY)/product_id
     $(BUILT_TARGET_FILES_PACKAGE): $(TARGET_OUT_OEM)/$(OSRELEASED_DIRECTORY)/product_version
@@ -2524,46 +3370,82 @@
 (cd $(1); find . -type d | sed 's,$$,/,'; find . \! -type d) | cut -c 3- | sort | sed 's,^,$(2),' | $(HOST_OUT_EXECUTABLES)/fs_config -C -D $(TARGET_OUT) -S $(SELINUX_FC) -R "$(2)"
 endef
 
+# $(1): file
+define dump-dynamic-partitions-info
+  $(if $(filter true,$(PRODUCT_USE_DYNAMIC_PARTITIONS)), \
+    echo "use_dynamic_partitions=true" >> $(1))
+  $(if $(filter true,$(PRODUCT_RETROFIT_DYNAMIC_PARTITIONS)), \
+    echo "dynamic_partition_retrofit=true" >> $(1))
+  echo "lpmake=$(notdir $(LPMAKE))" >> $(1)
+  $(if $(filter true,$(PRODUCT_BUILD_SUPER_PARTITION)), $(if $(BOARD_SUPER_PARTITION_SIZE), \
+    echo "build_super_partition=true" >> $(1)))
+  echo "super_metadata_device=$(BOARD_SUPER_PARTITION_METADATA_DEVICE)" >> $(1)
+  $(if $(BOARD_SUPER_PARTITION_BLOCK_DEVICES), \
+    echo "super_block_devices=$(BOARD_SUPER_PARTITION_BLOCK_DEVICES)" >> $(1))
+  $(foreach device,$(BOARD_SUPER_PARTITION_BLOCK_DEVICES), \
+    echo "super_$(device)_device_size=$(BOARD_SUPER_PARTITION_$(call to-upper,$(device))_DEVICE_SIZE)" >> $(1);)
+  $(if $(BOARD_SUPER_PARTITION_PARTITION_LIST), \
+    echo "dynamic_partition_list=$(BOARD_SUPER_PARTITION_PARTITION_LIST)" >> $(1))
+  $(if $(BOARD_SUPER_PARTITION_GROUPS),
+    echo "super_partition_groups=$(BOARD_SUPER_PARTITION_GROUPS)" >> $(1))
+  $(foreach group,$(BOARD_SUPER_PARTITION_GROUPS), \
+    echo "super_$(group)_group_size=$(BOARD_$(call to-upper,$(group))_SIZE)" >> $(1); \
+    $(if $(BOARD_$(call to-upper,$(group))_PARTITION_LIST), \
+      echo "super_$(group)_partition_list=$(BOARD_$(call to-upper,$(group))_PARTITION_LIST)" >> $(1);))
+endef
+
 # Depending on the various images guarantees that the underlying
 # directories are up-to-date.
 $(BUILT_TARGET_FILES_PACKAGE): \
-		$(INSTALLED_BOOTIMAGE_TARGET) \
-		$(INSTALLED_RADIOIMAGE_TARGET) \
-		$(INSTALLED_RECOVERYIMAGE_TARGET) \
-		$(FULL_SYSTEMIMAGE_DEPS) \
-		$(INSTALLED_USERDATAIMAGE_TARGET) \
-		$(INSTALLED_CACHEIMAGE_TARGET) \
-		$(INSTALLED_VENDORIMAGE_TARGET) \
-		$(INSTALLED_PRODUCTIMAGE_TARGET) \
-		$(INSTALLED_VBMETAIMAGE_TARGET) \
-		$(INSTALLED_DTBOIMAGE_TARGET) \
-		$(INTERNAL_SYSTEMOTHERIMAGE_FILES) \
-		$(INSTALLED_ANDROID_INFO_TXT_TARGET) \
-		$(INSTALLED_KERNEL_TARGET) \
-		$(INSTALLED_2NDBOOTLOADER_TARGET) \
-		$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_BASE_FS_PATH) \
-		$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VENDOR_BASE_FS_PATH) \
-		$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PRODUCT_BASE_FS_PATH) \
-		$(SELINUX_FC) \
-		$(APKCERTS_FILE) \
-		$(SOONG_ZIP) \
-		$(HOST_OUT_EXECUTABLES)/fs_config \
-		$(HOST_OUT_EXECUTABLES)/imgdiff \
-		$(HOST_OUT_EXECUTABLES)/bsdiff \
-		$(BUILD_IMAGE_SRCS) \
-		$(BUILT_VENDOR_MANIFEST) \
-		$(BUILT_VENDOR_MATRIX) \
-		| $(ACP)
+	    $(INSTALLED_RAMDISK_TARGET) \
+	    $(INSTALLED_BOOTIMAGE_TARGET) \
+	    $(INSTALLED_RADIOIMAGE_TARGET) \
+	    $(INSTALLED_RECOVERYIMAGE_TARGET) \
+	    $(FULL_SYSTEMIMAGE_DEPS) \
+	    $(INSTALLED_USERDATAIMAGE_TARGET) \
+	    $(INSTALLED_CACHEIMAGE_TARGET) \
+	    $(INSTALLED_VENDORIMAGE_TARGET) \
+	    $(INSTALLED_PRODUCTIMAGE_TARGET) \
+	    $(INSTALLED_PRODUCT_SERVICESIMAGE_TARGET) \
+	    $(INSTALLED_VBMETAIMAGE_TARGET) \
+	    $(INSTALLED_ODMIMAGE_TARGET) \
+	    $(INSTALLED_DTBOIMAGE_TARGET) \
+	    $(INTERNAL_SYSTEMOTHERIMAGE_FILES) \
+	    $(INSTALLED_ANDROID_INFO_TXT_TARGET) \
+	    $(INSTALLED_KERNEL_TARGET) \
+	    $(INSTALLED_2NDBOOTLOADER_TARGET) \
+	    $(BOARD_PREBUILT_DTBOIMAGE) \
+	    $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_BASE_FS_PATH) \
+	    $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VENDOR_BASE_FS_PATH) \
+	    $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PRODUCT_BASE_FS_PATH) \
+	    $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PRODUCT_SERVICES_BASE_FS_PATH) \
+	    $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_ODM_BASE_FS_PATH) \
+	    $(LPMAKE) \
+	    $(SELINUX_FC) \
+	    $(APKCERTS_FILE) \
+	    $(SOONG_ZIP) \
+	    $(HOST_OUT_EXECUTABLES)/fs_config \
+	    $(HOST_OUT_EXECUTABLES)/imgdiff \
+	    $(HOST_OUT_EXECUTABLES)/bsdiff \
+	    $(HOST_OUT_EXECUTABLES)/care_map_generator \
+	    $(BUILD_IMAGE_SRCS) \
+	    $(BUILT_ASSEMBLED_SYSTEM_MANIFEST) \
+	    $(BUILT_ASSEMBLED_VENDOR_MANIFEST) \
+	    $(BUILT_SYSTEM_MATRIX) \
+	    $(BUILT_VENDOR_MATRIX) \
+	    | $(ACP)
 	@echo "Package target files: $@"
 	$(call create-system-vendor-symlink)
 	$(call create-system-product-symlink)
+	$(call create-system-product_services-symlink)
+	$(call create-vendor-odm-symlink)
 	$(hide) rm -rf $@ $@.list $(zip_root)
 	$(hide) mkdir -p $(dir $@) $(zip_root)
 ifneq (,$(INSTALLED_RECOVERYIMAGE_TARGET)$(filter true,$(BOARD_USES_RECOVERY_AS_BOOT)))
 	@# Components of the recovery image
 	$(hide) mkdir -p $(zip_root)/$(PRIVATE_RECOVERY_OUT)
 	$(hide) $(call package_files-copy-root, \
-		$(TARGET_RECOVERY_ROOT_OUT),$(zip_root)/$(PRIVATE_RECOVERY_OUT)/RAMDISK)
+	    $(TARGET_RECOVERY_ROOT_OUT),$(zip_root)/$(PRIVATE_RECOVERY_OUT)/RAMDISK)
 ifdef INSTALLED_KERNEL_TARGET
 	$(hide) cp $(INSTALLED_KERNEL_TARGET) $(zip_root)/$(PRIVATE_RECOVERY_OUT)/kernel
 endif
@@ -2571,7 +3453,7 @@
 	$(hide) cp $(INSTALLED_2NDBOOTLOADER_TARGET) $(zip_root)/$(PRIVATE_RECOVERY_OUT)/second
 endif
 ifdef BOARD_INCLUDE_RECOVERY_DTBO
-	$(hide) cp $(INSTALLED_DTBOIMAGE_TARGET) $(zip_root)/$(PRIVATE_RECOVERY_OUT)/recovery_dtbo
+	$(hide) cp $(BOARD_PREBUILT_DTBOIMAGE) $(zip_root)/$(PRIVATE_RECOVERY_OUT)/recovery_dtbo
 endif
 ifdef INTERNAL_KERNEL_CMDLINE
 	$(hide) echo "$(INTERNAL_KERNEL_CMDLINE)" > $(zip_root)/$(PRIVATE_RECOVERY_OUT)/cmdline
@@ -2585,16 +3467,15 @@
 endif # INSTALLED_RECOVERYIMAGE_TARGET defined or BOARD_USES_RECOVERY_AS_BOOT is true
 	@# Components of the boot image
 	$(hide) mkdir -p $(zip_root)/BOOT
-ifeq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true)
 	$(hide) mkdir -p $(zip_root)/ROOT
 	$(hide) $(call package_files-copy-root, \
-		$(TARGET_ROOT_OUT),$(zip_root)/ROOT)
-else
-	$(hide) $(call package_files-copy-root, \
-		$(TARGET_ROOT_OUT),$(zip_root)/BOOT/RAMDISK)
-endif
+	    $(TARGET_ROOT_OUT),$(zip_root)/ROOT)
 	@# If we are using recovery as boot, this is already done when processing recovery.
 ifneq ($(BOARD_USES_RECOVERY_AS_BOOT),true)
+ifneq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true)
+	$(hide) $(call package_files-copy-root, \
+	    $(TARGET_RAMDISK_OUT),$(zip_root)/BOOT/RAMDISK)
+endif
 ifdef INSTALLED_KERNEL_TARGET
 	$(hide) cp $(INSTALLED_KERNEL_TARGET) $(zip_root)/BOOT/kernel
 endif
@@ -2616,24 +3497,34 @@
 	            cp $(t) $(zip_root)/RADIO/$(notdir $(t));)
 	@# Contents of the system image
 	$(hide) $(call package_files-copy-root, \
-		$(SYSTEMIMAGE_SOURCE_DIR),$(zip_root)/SYSTEM)
+	    $(SYSTEMIMAGE_SOURCE_DIR),$(zip_root)/SYSTEM)
 	@# Contents of the data image
 	$(hide) $(call package_files-copy-root, \
-		$(TARGET_OUT_DATA),$(zip_root)/DATA)
+	    $(TARGET_OUT_DATA),$(zip_root)/DATA)
 ifdef BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE
 	@# Contents of the vendor image
 	$(hide) $(call package_files-copy-root, \
-		$(TARGET_OUT_VENDOR),$(zip_root)/VENDOR)
+	    $(TARGET_OUT_VENDOR),$(zip_root)/VENDOR)
 endif
 ifdef BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE
 	@# Contents of the product image
 	$(hide) $(call package_files-copy-root, \
-		$(TARGET_OUT_PRODUCT),$(zip_root)/PRODUCT)
+	    $(TARGET_OUT_PRODUCT),$(zip_root)/PRODUCT)
+endif
+ifdef BOARD_PRODUCT_SERVICESIMAGE_FILE_SYSTEM_TYPE
+	@# Contents of the product_services image
+	$(hide) $(call package_files-copy-root, \
+	    $(TARGET_OUT_PRODUCT_SERVICES),$(zip_root)/PRODUCT_SERVICES)
+endif
+ifdef BOARD_ODMIMAGE_FILE_SYSTEM_TYPE
+	@# Contents of the odm image
+	$(hide) $(call package_files-copy-root, \
+	    $(TARGET_OUT_ODM),$(zip_root)/ODM)
 endif
 ifdef INSTALLED_SYSTEMOTHERIMAGE_TARGET
 	@# Contents of the system_other image
 	$(hide) $(call package_files-copy-root, \
-		$(TARGET_OUT_SYSTEM_OTHER),$(zip_root)/SYSTEM_OTHER)
+	    $(TARGET_OUT_SYSTEM_OTHER),$(zip_root)/SYSTEM_OTHER)
 endif
 	@# Extra contents of the OTA package
 	$(hide) mkdir -p $(zip_root)/OTA
@@ -2701,6 +3592,14 @@
 	$(hide) cp $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PRODUCT_BASE_FS_PATH) \
 	  $(zip_root)/META/$(notdir $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PRODUCT_BASE_FS_PATH))
 endif
+ifneq ($(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PRODUCT_SERVICES_BASE_FS_PATH),)
+	$(hide) cp $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PRODUCT_SERVICES_BASE_FS_PATH) \
+	  $(zip_root)/META/$(notdir $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PRODUCT_SERVICES_BASE_FS_PATH))
+endif
+ifneq ($(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_ODM_BASE_FS_PATH),)
+	$(hide) cp $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_ODM_BASE_FS_PATH) \
+	  $(zip_root)/META/$(notdir $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_ODM_BASE_FS_PATH))
+endif
 ifneq ($(strip $(SANITIZE_TARGET)),)
 	# We need to create userdata.img with real data because the instrumented libraries are in userdata.img.
 	$(hide) echo "userdata_img_with_data=true" >> $(zip_root)/META/misc_info.txt
@@ -2725,6 +3624,20 @@
 	$(hide) echo "avb_recovery_algorithm=$(BOARD_AVB_RECOVERY_ALGORITHM)" >> $(zip_root)/META/misc_info.txt
 	$(hide) echo "avb_recovery_rollback_index_location=$(BOARD_AVB_RECOVERY_ROLLBACK_INDEX_LOCATION)" >> $(zip_root)/META/misc_info.txt
 endif # BOARD_AVB_RECOVERY_KEY_PATH
+ifneq (,$(strip $(BOARD_AVB_VBMETA_SYSTEM)))
+	$(hide) echo "avb_vbmeta_system=$(BOARD_AVB_VBMETA_SYSTEM)" >> $(zip_root)/META/misc_info.txt
+	$(hide) echo "avb_vbmeta_system_args=$(BOARD_AVB_MAKE_VBMETA_SYSTEM_IMAGE_ARGS)" >> $(zip_root)/META/misc_info.txt
+	$(hide) echo "avb_vbmeta_system_key_path=$(BOARD_AVB_VBMETA_SYSTEM_KEY_PATH)" >> $(zip_root)/META/misc_info.txt
+	$(hide) echo "avb_vbmeta_system_algorithm=$(BOARD_AVB_VBMETA_SYSTEM_ALGORITHM)" >> $(zip_root)/META/misc_info.txt
+	$(hide) echo "avb_vbmeta_system_rollback_index_location=$(BOARD_AVB_VBMETA_SYSTEM_ROLLBACK_INDEX_LOCATION)" >> $(zip_root)/META/misc_info.txt
+endif # BOARD_AVB_VBMETA_SYSTEM
+ifneq (,$(strip $(BOARD_AVB_VBMETA_VENDOR)))
+	$(hide) echo "avb_vbmeta_vendor=$(BOARD_AVB_VBMETA_VENDOR)" >> $(zip_root)/META/misc_info.txt
+	$(hide) echo "avb_vbmeta_vendor_args=$(BOARD_AVB_MAKE_VBMETA_SYSTEM_IMAGE_ARGS)" >> $(zip_root)/META/misc_info.txt
+	$(hide) echo "avb_vbmeta_vendor_key_path=$(BOARD_AVB_VBMETA_VENDOR_KEY_PATH)" >> $(zip_root)/META/misc_info.txt
+	$(hide) echo "avb_vbmeta_vendor_algorithm=$(BOARD_AVB_VBMETA_VENDOR_ALGORITHM)" >> $(zip_root)/META/misc_info.txt
+	$(hide) echo "avb_vbmeta_vendor_rollback_index_location=$(BOARD_AVB_VBMETA_VENDOR_ROLLBACK_INDEX_LOCATION)" >> $(zip_root)/META/misc_info.txt
+endif # BOARD_AVB_VBMETA_VENDOR_KEY_PATH
 endif # BOARD_AVB_ENABLE
 ifdef BOARD_BPT_INPUT_FILES
 	$(hide) echo "board_bpt_enable=true" >> $(zip_root)/META/misc_info.txt
@@ -2751,17 +3664,6 @@
 	@# Include the build type in META/misc_info.txt so the server can easily differentiate production builds.
 	$(hide) echo "build_type=$(TARGET_BUILD_VARIANT)" >> $(zip_root)/META/misc_info.txt
 	$(hide) echo "ab_update=true" >> $(zip_root)/META/misc_info.txt
-ifdef BRILLO_VENDOR_PARTITIONS
-	$(hide) mkdir -p $(zip_root)/VENDOR_IMAGES
-	$(hide) for f in $(BRILLO_VENDOR_PARTITIONS); do \
-	  pair1="$$(echo $$f | awk -F':' '{print $$1}')"; \
-	  pair2="$$(echo $$f | awk -F':' '{print $$2}')"; \
-	  src=$${pair1}/$${pair2}; \
-	  dest=$(zip_root)/VENDOR_IMAGES/$${pair2}; \
-	  mkdir -p $$(dirname "$${dest}"); \
-	  cp $${src} $${dest}; \
-	done;
-endif
 ifdef OSRELEASED_DIRECTORY
 	$(hide) cp $(TARGET_OUT_OEM)/$(OSRELEASED_DIRECTORY)/product_id $(zip_root)/META/product_id.txt
 	$(hide) cp $(TARGET_OUT_OEM)/$(OSRELEASED_DIRECTORY)/product_version $(zip_root)/META/product_version.txt
@@ -2772,14 +3674,6 @@
 	@# If breakpad symbols have been generated, add them to the zip.
 	$(hide) $(ACP) -r $(TARGET_OUT_BREAKPAD) $(zip_root)/BREAKPAD
 endif
-# BOARD_BUILD_DISABLED_VBMETAIMAGE is used to build a special vbmeta.img
-# that disables AVB verification. The content is fixed and we can just copy
-# it to $(zip_root)/IMAGES without passing some info into misc_info.txt for
-# regeneration.
-ifeq (true,$(BOARD_BUILD_DISABLED_VBMETAIMAGE))
-	$(hide) mkdir -p $(zip_root)/IMAGES
-	$(hide) cp $(INSTALLED_VBMETAIMAGE_TARGET) $(zip_root)/IMAGES/
-endif
 ifdef BOARD_PREBUILT_VENDORIMAGE
 	$(hide) mkdir -p $(zip_root)/IMAGES
 	$(hide) cp $(INSTALLED_VENDORIMAGE_TARGET) $(zip_root)/IMAGES/
@@ -2788,10 +3682,18 @@
 	$(hide) mkdir -p $(zip_root)/IMAGES
 	$(hide) cp $(INSTALLED_PRODUCTIMAGE_TARGET) $(zip_root)/IMAGES/
 endif
+ifdef BOARD_PREBUILT_PRODUCT_SERVICESIMAGE
+	$(hide) mkdir -p $(zip_root)/IMAGES
+	$(hide) cp $(INSTALLED_PRODUCT_SERVICESIMAGE_TARGET) $(zip_root)/IMAGES/
+endif
 ifdef BOARD_PREBUILT_BOOTIMAGE
 	$(hide) mkdir -p $(zip_root)/IMAGES
 	$(hide) cp $(INSTALLED_BOOTIMAGE_TARGET) $(zip_root)/IMAGES/
 endif
+ifdef BOARD_PREBUILT_ODMIMAGE
+	$(hide) mkdir -p $(zip_root)/IMAGES
+	$(hide) cp $(INSTALLED_ODMIMAGE_TARGET) $(zip_root)/IMAGES/
+endif
 ifdef BOARD_PREBUILT_DTBOIMAGE
 	$(hide) mkdir -p $(zip_root)/PREBUILT_IMAGES
 	$(hide) cp $(INSTALLED_DTBOIMAGE_TARGET) $(zip_root)/PREBUILT_IMAGES/
@@ -2807,6 +3709,7 @@
 endif # BOARD_AVB_DTBO_KEY_PATH
 endif # BOARD_AVB_ENABLE
 endif # BOARD_PREBUILT_DTBOIMAGE
+	$(call dump-dynamic-partitions-info,$(zip_root)/META/misc_info.txt)
 	@# The radio images in BOARD_PACK_RADIOIMAGES will be additionally copied from RADIO/ into
 	@# IMAGES/, which then will be added into <product>-img.zip. Such images must be listed in
 	@# INSTALLED_RADIOIMAGE_TARGET.
@@ -2821,14 +3724,20 @@
 ifdef BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE
 	$(hide) $(call fs_config,$(zip_root)/PRODUCT,product/) > $(zip_root)/META/product_filesystem_config.txt
 endif
-ifeq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true)
-	@# When using BOARD_BUILD_SYSTEM_ROOT_IMAGE, ROOT always contains the files for the root under
-	@# normal boot. BOOT/RAMDISK exists only if additionally using BOARD_USES_RECOVERY_AS_BOOT.
+ifdef BOARD_PRODUCT_SERVICESIMAGE_FILE_SYSTEM_TYPE
+	$(hide) $(call fs_config,$(zip_root)/PRODUCT_SERVICES,product_services/) > $(zip_root)/META/product_services_filesystem_config.txt
+endif
+ifdef BOARD_ODMIMAGE_FILE_SYSTEM_TYPE
+	$(hide) $(call fs_config,$(zip_root)/ODM,odm/) > $(zip_root)/META/odm_filesystem_config.txt
+endif
+	@# ROOT always contains the files for the root under normal boot.
 	$(hide) $(call fs_config,$(zip_root)/ROOT,) > $(zip_root)/META/root_filesystem_config.txt
 ifeq ($(BOARD_USES_RECOVERY_AS_BOOT),true)
+	@# BOOT/RAMDISK exists and contains the ramdisk for recovery if using BOARD_USES_RECOVERY_AS_BOOT.
 	$(hide) $(call fs_config,$(zip_root)/BOOT/RAMDISK,) > $(zip_root)/META/boot_filesystem_config.txt
 endif
-else # BOARD_BUILD_SYSTEM_ROOT_IMAGE != true
+ifneq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true)
+	@# BOOT/RAMDISK also exists and contains the first stage ramdisk if not using BOARD_BUILD_SYSTEM_ROOT_IMAGE.
 	$(hide) $(call fs_config,$(zip_root)/BOOT/RAMDISK,) > $(zip_root)/META/boot_filesystem_config.txt
 endif
 ifneq ($(INSTALLED_RECOVERYIMAGE_TARGET),)
@@ -2838,14 +3747,21 @@
 	$(hide) $(call fs_config,$(zip_root)/SYSTEM_OTHER,system/) > $(zip_root)/META/system_other_filesystem_config.txt
 endif
 	@# Metadata for compatibility verification.
-	$(hide) cp $(BUILT_SYSTEM_MANIFEST) $(zip_root)/META/system_manifest.xml
-	$(hide) cp $(BUILT_SYSTEM_COMPATIBILITY_MATRIX) $(zip_root)/META/system_matrix.xml
-ifdef BUILT_VENDOR_MANIFEST
-	$(hide) cp $(BUILT_VENDOR_MANIFEST) $(zip_root)/META/vendor_manifest.xml
+	$(hide) cp $(BUILT_SYSTEM_MATRIX) $(zip_root)/META/system_matrix.xml
+	$(hide) cp $(BUILT_ASSEMBLED_SYSTEM_MANIFEST) $(zip_root)/META/system_manifest.xml
+ifdef BUILT_ASSEMBLED_VENDOR_MANIFEST
+	$(hide) cp $(BUILT_ASSEMBLED_VENDOR_MANIFEST) $(zip_root)/META/vendor_manifest.xml
 endif
 ifdef BUILT_VENDOR_MATRIX
 	$(hide) cp $(BUILT_VENDOR_MATRIX) $(zip_root)/META/vendor_matrix.xml
 endif
+ifneq ($(BOARD_SUPER_PARTITION_GROUPS),)
+	$(hide) echo "super_partition_groups=$(BOARD_SUPER_PARTITION_GROUPS)" > $(zip_root)/META/dynamic_partitions_info.txt
+	$(foreach group,$(BOARD_SUPER_PARTITION_GROUPS), \
+	    echo "$(group)_size=$(BOARD_$(call to-upper,$(group))_SIZE)" >> $(zip_root)/META/dynamic_partitions_info.txt; \
+	    $(if $(BOARD_$(call to-upper,$(group))_PARTITION_LIST), \
+	        echo "$(group)_partition_list=$(BOARD_$(call to-upper,$(group))_PARTITION_LIST)" >> $(zip_root)/META/dynamic_partitions_info.txt;))
+endif
 
 	$(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH MKBOOTIMG=$(MKBOOTIMG) \
 	    build/make/tools/releasetools/add_img_to_target_files -a -v -p $(HOST_OUT) $(zip_root)
@@ -2865,7 +3781,7 @@
 # -----------------------------------------------------------------
 # NDK Sysroot Package
 NDK_SYSROOT_TARGET := $(PRODUCT_OUT)/ndk_sysroot.tar.bz2
-$(NDK_SYSROOT_TARGET): ndk
+$(NDK_SYSROOT_TARGET): $(SOONG_OUT_DIR)/ndk.timestamp
 	@echo Package NDK sysroot...
 	$(hide) tar cjf $@ -C $(SOONG_OUT_DIR) ndk
 
@@ -2875,6 +3791,19 @@
 # -----------------------------------------------------------------
 # OTA update package
 
+# $(1): output file
+# $(2): additional args
+define build-ota-package-target
+PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH MKBOOTIMG=$(MKBOOTIMG) \
+   build/make/tools/releasetools/ota_from_target_files -v \
+   --block \
+   --extracted_input_target_files $(patsubst %.zip,%,$(BUILT_TARGET_FILES_PACKAGE)) \
+   -p $(HOST_OUT) \
+   $(if $(OEM_OTA_CONFIG), -o $(OEM_OTA_CONFIG)) \
+   $(2) \
+   $(BUILT_TARGET_FILES_PACKAGE) $(1)
+endef
+
 name := $(TARGET_PRODUCT)
 ifeq ($(TARGET_BUILD_TYPE),debug)
   name := $(name)_debug
@@ -2892,20 +3821,41 @@
 endif
 
 $(INTERNAL_OTA_PACKAGE_TARGET): $(BUILT_TARGET_FILES_PACKAGE) \
-		build/make/tools/releasetools/ota_from_target_files
+	    build/make/tools/releasetools/ota_from_target_files
 	@echo "Package OTA: $@"
-	$(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH MKBOOTIMG=$(MKBOOTIMG) \
-	   build/make/tools/releasetools/ota_from_target_files -v \
-	   --block \
-	   --extracted_input_target_files $(patsubst %.zip,%,$(BUILT_TARGET_FILES_PACKAGE)) \
-	   -p $(HOST_OUT) \
-	   -k $(KEY_CERT_PAIR) \
-	   $(if $(OEM_OTA_CONFIG), -o $(OEM_OTA_CONFIG)) \
-	   $(BUILT_TARGET_FILES_PACKAGE) $@
+	$(call build-ota-package-target,$@,-k $(KEY_CERT_PAIR))
 
 .PHONY: otapackage
 otapackage: $(INTERNAL_OTA_PACKAGE_TARGET)
 
+ifeq ($(PRODUCT_RETROFIT_DYNAMIC_PARTITIONS),true)
+name := $(TARGET_PRODUCT)
+ifeq ($(TARGET_BUILD_TYPE),debug)
+  name := $(name)_debug
+endif
+name := $(name)-ota-retrofit-$(FILE_NAME_TAG)
+
+INTERNAL_OTA_RETROFIT_DYNAMIC_PARTITIONS_PACKAGE_TARGET := $(PRODUCT_OUT)/$(name).zip
+
+$(INTERNAL_OTA_RETROFIT_DYNAMIC_PARTITIONS_PACKAGE_TARGET): KEY_CERT_PAIR := $(DEFAULT_KEY_CERT_PAIR)
+
+ifeq ($(AB_OTA_UPDATER),true)
+$(INTERNAL_OTA_RETROFIT_DYNAMIC_PARTITIONS_PACKAGE_TARGET): $(BRILLO_UPDATE_PAYLOAD)
+else
+$(INTERNAL_OTA_RETROFIT_DYNAMIC_PARTITIONS_PACKAGE_TARGET): $(BROTLI)
+endif
+
+$(INTERNAL_OTA_RETROFIT_DYNAMIC_PARTITIONS_PACKAGE_TARGET): $(BUILT_TARGET_FILES_PACKAGE) \
+	    build/make/tools/releasetools/ota_from_target_files
+	@echo "Package OTA (retrofit dynamic partitions): $@"
+	$(call build-ota-package-target,$@,-k $(KEY_CERT_PAIR) --retrofit_dynamic_partitions)
+
+.PHONY: otardppackage
+
+otapackage otardppackage: $(INTERNAL_OTA_RETROFIT_DYNAMIC_PARTITIONS_PACKAGE_TARGET)
+
+endif # PRODUCT_RETROFIT_DYNAMIC_PARTITIONS
+
 endif    # build_ota_package
 
 # -----------------------------------------------------------------
@@ -2928,6 +3878,28 @@
 updatepackage: $(INTERNAL_UPDATE_PACKAGE_TARGET)
 
 # -----------------------------------------------------------------
+# A zip of the appcompat directory containing logs
+APPCOMPAT_ZIP := $(PRODUCT_OUT)/appcompat.zip
+# For apps_only build we'll establish the dependency later in build/make/core/main.mk.
+ifndef TARGET_BUILD_APPS
+$(APPCOMPAT_ZIP): $(INSTALLED_SYSTEMIMAGE_TARGET) \
+	    $(INSTALLED_RAMDISK_TARGET) \
+	    $(INSTALLED_BOOTIMAGE_TARGET) \
+	    $(INSTALLED_USERDATAIMAGE_TARGET) \
+	    $(INSTALLED_VENDORIMAGE_TARGET) \
+	    $(INSTALLED_PRODUCTIMAGE_TARGET) \
+	    $(INSTALLED_PRODUCT_SERVICESIMAGE_TARGET)
+endif
+$(APPCOMPAT_ZIP): PRIVATE_LIST_FILE := $(call intermediates-dir-for,PACKAGING,appcompat)/filelist
+$(APPCOMPAT_ZIP): $(SOONG_ZIP)
+	@echo "appcompat logs: $@"
+	$(hide) rm -rf $@ $(PRIVATE_LIST_FILE)
+	$(hide) mkdir -p $(dir $@) $(PRODUCT_OUT)/appcompat $(dir $(PRIVATE_LIST_FILE))
+	$(hide) find $(PRODUCT_OUT)/appcompat | sort >$(PRIVATE_LIST_FILE)
+	$(hide) $(SOONG_ZIP) -d -o $@ -C $(PRODUCT_OUT)/appcompat -l $(PRIVATE_LIST_FILE)
+
+
+# -----------------------------------------------------------------
 # A zip of the symbols directory.  Keep the full paths to make it
 # more obvious where these files came from.
 #
@@ -2940,12 +3912,15 @@
 SYMBOLS_ZIP := $(PRODUCT_OUT)/$(name).zip
 # For apps_only build we'll establish the dependency later in build/make/core/main.mk.
 ifndef TARGET_BUILD_APPS
-$(SYMBOLS_ZIP): $(INSTALLED_SYSTEMIMAGE) \
-		$(INSTALLED_BOOTIMAGE_TARGET) \
-		$(INSTALLED_USERDATAIMAGE_TARGET) \
-		$(INSTALLED_VENDORIMAGE_TARGET) \
-		$(INSTALLED_PRODUCTIMAGE_TARGET) \
-		$(updater_dep)
+$(SYMBOLS_ZIP): $(INSTALLED_SYSTEMIMAGE_TARGET) \
+	    $(INSTALLED_RAMDISK_TARGET) \
+	    $(INSTALLED_BOOTIMAGE_TARGET) \
+	    $(INSTALLED_USERDATAIMAGE_TARGET) \
+	    $(INSTALLED_VENDORIMAGE_TARGET) \
+	    $(INSTALLED_PRODUCTIMAGE_TARGET) \
+	    $(INSTALLED_PRODUCT_SERVICESIMAGE_TARGET) \
+	    $(INSTALLED_ODMIMAGE_TARGET) \
+	    $(updater_dep)
 endif
 $(SYMBOLS_ZIP): PRIVATE_LIST_FILE := $(call intermediates-dir-for,PACKAGING,symbols)/filelist
 $(SYMBOLS_ZIP): $(SOONG_ZIP)
@@ -2964,11 +3939,14 @@
 name := $(name)-coverage-$(FILE_NAME_TAG)
 COVERAGE_ZIP := $(PRODUCT_OUT)/$(name).zip
 ifndef TARGET_BUILD_APPS
-$(COVERAGE_ZIP): $(INSTALLED_SYSTEMIMAGE) \
-		$(INSTALLED_BOOTIMAGE_TARGET) \
-		$(INSTALLED_USERDATAIMAGE_TARGET) \
-		$(INSTALLED_VENDORIMAGE_TARGET) \
-		$(INSTALLED_PRODUCTIMAGE_TARGET)
+$(COVERAGE_ZIP): $(INSTALLED_SYSTEMIMAGE_TARGET) \
+	    $(INSTALLED_RAMDISK_TARGET) \
+	    $(INSTALLED_BOOTIMAGE_TARGET) \
+	    $(INSTALLED_USERDATAIMAGE_TARGET) \
+	    $(INSTALLED_VENDORIMAGE_TARGET) \
+	    $(INSTALLED_PRODUCTIMAGE_TARGET) \
+	    $(INSTALLED_PRODUCT_SERVICESIMAGE_TARGET) \
+	    $(INSTALLED_ODMIMAGE_TARGET)
 endif
 $(COVERAGE_ZIP): PRIVATE_LIST_FILE := $(call intermediates-dir-for,PACKAGING,coverage)/filelist
 $(COVERAGE_ZIP): $(SOONG_ZIP)
@@ -2989,16 +3967,16 @@
 name := $(name)-apps-$(FILE_NAME_TAG)
 
 APPS_ZIP := $(PRODUCT_OUT)/$(name).zip
-$(APPS_ZIP): $(INSTALLED_SYSTEMIMAGE)
+$(APPS_ZIP): $(INSTALLED_SYSTEMIMAGE_TARGET)
 	@echo "Package apps: $@"
 	$(hide) rm -rf $@
 	$(hide) mkdir -p $(dir $@)
 	$(hide) apps_to_zip=`find $(TARGET_OUT_APPS) $(TARGET_OUT_APPS_PRIVILEGED) -mindepth 2 -maxdepth 3 -name "*.apk"`; \
 	if [ -z "$$apps_to_zip" ]; then \
-		echo "No apps to zip up. Generating empty apps archive." ; \
-		a=$$(mktemp /tmp/XXXXXXX) && touch $$a && zip $@ $$a && zip -d $@ $$a; \
+	    echo "No apps to zip up. Generating empty apps archive." ; \
+	    a=$$(mktemp /tmp/XXXXXXX) && touch $$a && zip $@ $$a && zip -d $@ $$a; \
 	else \
-		zip -qjX $@ $$apps_to_zip; \
+	    zip -qjX $@ $$apps_to_zip; \
 	fi
 
 ifeq (true,$(EMMA_INSTRUMENT))
@@ -3012,7 +3990,7 @@
 $(JACOCO_REPORT_CLASSES_ALL) :
 	@echo "Collecting uninstrumented classes"
 	$(hide) find $(TARGET_COMMON_OUT_ROOT) $(HOST_COMMON_OUT_ROOT) -name "jacoco-report-classes.jar" | \
-		zip -@ -0 -q -X $@
+	    zip -@ -0 -q -X $@
 # Meaning of these options:
 # -@ scan stdin for file paths to add to the zip
 # -0 don't do any compression
@@ -3032,19 +4010,54 @@
 $(PROGUARD_DICT_ZIP) :
 	@echo "Packaging Proguard obfuscation dictionary files."
 	$(hide) dict_files=`find $(TARGET_OUT_COMMON_INTERMEDIATES)/APPS -name proguard_dictionary`; \
-		if [ -n "$$dict_files" ]; then \
-		  unobfuscated_jars=$${dict_files//proguard_dictionary/classes.jar}; \
-		  zip -qX $@ $$dict_files $$unobfuscated_jars; \
-		else \
-		  touch $(dir $@)/zipdummy; \
-		  (cd $(dir $@) && zip -q $(notdir $@) zipdummy); \
-		  zip -qd $@ zipdummy; \
-		  rm $(dir $@)/zipdummy; \
-		fi
+	    if [ -n "$$dict_files" ]; then \
+	      unobfuscated_jars=$${dict_files//proguard_dictionary/classes.jar}; \
+	      zip -qX $@ $$dict_files $$unobfuscated_jars; \
+	    else \
+	      touch $(dir $@)/zipdummy; \
+	      (cd $(dir $@) && zip -q $(notdir $@) zipdummy); \
+	      zip -qd $@ zipdummy; \
+	      rm $(dir $@)/zipdummy; \
+	    fi
 
 endif # TARGET_BUILD_APPS
 
 # -----------------------------------------------------------------
+# super partition image
+
+ifeq (true,$(PRODUCT_BUILD_SUPER_PARTITION))
+
+# BOARD_SUPER_PARTITION_SIZE must be defined to build super image.
+ifneq ($(BOARD_SUPER_PARTITION_SIZE),)
+
+ifneq (true,$(PRODUCT_RETROFIT_DYNAMIC_PARTITIONS))
+INSTALLED_SUPERIMAGE_TARGET := $(PRODUCT_OUT)/super.img
+$(INSTALLED_SUPERIMAGE_TARGET): extracted_input_target_files := $(patsubst %.zip,%,$(BUILT_TARGET_FILES_PACKAGE))
+$(INSTALLED_SUPERIMAGE_TARGET): $(LPMAKE) $(BUILT_TARGET_FILES_PACKAGE) $(BUILD_SUPER_IMAGE)
+	$(call pretty,"Target super fs image: $@")
+	$(BUILD_SUPER_IMAGE) -v $(extracted_input_target_files) $@
+endif
+
+$(call dist-for-goals,dist_files,$(INSTALLED_SUPERIMAGE_TARGET))
+
+INSTALLED_SUPERIMAGE_EMPTY_TARGET := $(PRODUCT_OUT)/super_empty.img
+$(INSTALLED_SUPERIMAGE_EMPTY_TARGET): intermediates := $(call intermediates-dir-for,PACKAGING,super_empty)
+$(INSTALLED_SUPERIMAGE_EMPTY_TARGET): $(LPMAKE) $(BUILD_SUPER_IMAGE)
+	$(call pretty,"Target empty super fs image: $@")
+	mkdir -p $(intermediates)
+	rm -rf $(intermediates)/misc_info.txt
+	$(call dump-dynamic-partitions-info,$(intermediates)/misc_info.txt)
+ifeq ($(AB_OTA_UPDATER),true)
+	$(hide) echo "ab_update=true" >> $(intermediates)/misc_info.txt
+endif
+	$(BUILD_SUPER_IMAGE) -v $(intermediates)/misc_info.txt $@
+
+$(call dist-for-goals,dist_files,$(INSTALLED_SUPERIMAGE_EMPTY_TARGET))
+
+endif # BOARD_SUPER_PARTITION_SIZE != ""
+endif # PRODUCT_BUILD_SUPER_PARTITION == "true"
+
+# -----------------------------------------------------------------
 # dalvik something
 .PHONY: dalvikfiles
 dalvikfiles: $(INTERNAL_DALVIK_MODULES)
@@ -3053,30 +4066,60 @@
 INSTALLED_QEMU_SYSTEMIMAGE := $(PRODUCT_OUT)/system-qemu.img
 MK_QEMU_IMAGE_SH := device/generic/goldfish/tools/mk_qemu_image.sh
 SGDISK_HOST := $(HOST_OUT_EXECUTABLES)/sgdisk
-$(INSTALLED_QEMU_SYSTEMIMAGE): $(INSTALLED_SYSTEMIMAGE) $(MK_QEMU_IMAGE_SH) $(SGDISK_HOST)
+$(INSTALLED_QEMU_SYSTEMIMAGE): $(INSTALLED_SYSTEMIMAGE_TARGET) $(MK_QEMU_IMAGE_SH) $(SGDISK_HOST) $(SIMG2IMG)
 	@echo Create system-qemu.img
-	(export SGDISK=$(SGDISK_HOST); $(MK_QEMU_IMAGE_SH) ${PRODUCT_OUT}/system.img)
+	(export SGDISK=$(SGDISK_HOST) SIMG2IMG=$(SIMG2IMG); $(MK_QEMU_IMAGE_SH) ${PRODUCT_OUT}/system.img)
 
 systemimage: $(INSTALLED_QEMU_SYSTEMIMAGE)
 droidcore: $(INSTALLED_QEMU_SYSTEMIMAGE)
 ifeq ($(BOARD_USES_VENDORIMAGE),true)
 INSTALLED_QEMU_VENDORIMAGE := $(PRODUCT_OUT)/vendor-qemu.img
-$(INSTALLED_QEMU_VENDORIMAGE): $(INSTALLED_VENDORIMAGE_TARGET) $(MK_QEMU_IMAGE_SH) $(SGDISK_HOST)
+$(INSTALLED_QEMU_VENDORIMAGE): $(INSTALLED_VENDORIMAGE_TARGET) $(MK_QEMU_IMAGE_SH) $(SGDISK_HOST) $(SIMG2IMG)
 	@echo Create vendor-qemu.img
-	(export SGDISK=$(SGDISK_HOST); $(MK_QEMU_IMAGE_SH) ${PRODUCT_OUT}/vendor.img)
+	(export SGDISK=$(SGDISK_HOST) SIMG2IMG=$(SIMG2IMG); $(MK_QEMU_IMAGE_SH) ${PRODUCT_OUT}/vendor.img)
 
 vendorimage: $(INSTALLED_QEMU_VENDORIMAGE)
 droidcore: $(INSTALLED_QEMU_VENDORIMAGE)
 endif
 ifeq ($(BOARD_USES_PRODUCTIMAGE),true)
 INSTALLED_QEMU_PRODUCTIMAGE := $(PRODUCT_OUT)/product-qemu.img
-$(INSTALLED_QEMU_PRODUCTIMAGE): $(INSTALLED_PRODUCTIMAGE_TARGET) $(MK_QEMU_IMAGE_SH) $(SGDISK_HOST)
+$(INSTALLED_QEMU_PRODUCTIMAGE): $(INSTALLED_PRODUCTIMAGE_TARGET) $(MK_QEMU_IMAGE_SH) $(SGDISK_HOST) $(SIMG2IMG)
 	@echo Create product-qemu.img
-	(export SGDISK=$(SGDISK_HOST); $(MK_QEMU_IMAGE_SH) ${PRODUCT_OUT}/product.img)
+	(export SGDISK=$(SGDISK_HOST) SIMG2IMG=$(SIMG2IMG); $(MK_QEMU_IMAGE_SH) ${PRODUCT_OUT}/product.img)
 
 productimage: $(INSTALLED_QEMU_PRODUCTIMAGE)
 droidcore: $(INSTALLED_QEMU_PRODUCTIMAGE)
 endif
+ifeq ($(BOARD_USES_PRODUCT_SERVICESIMAGE),true)
+INSTALLED_QEMU_PRODUCT_SERVICESIMAGE := $(PRODUCT_OUT)/product_services-qemu.img
+$(INSTALLED_QEMU_PRODUCT_SERVICESIMAGE): $(INSTALLED_PRODUCT_SERVICESIMAGE_TARGET) $(MK_QEMU_IMAGE_SH) $(SGDISK_HOST) $(SIMG2IMG)
+	@echo Create product_services-qemu.img
+	(export SGDISK=$(SGDISK_HOST) SIMG2IMG=$(SIMG2IMG); $(MK_QEMU_IMAGE_SH) ${PRODUCT_OUT}/product_services.img)
+
+productservicesimage: $(INSTALLED_QEMU_PRODUCT_SERVICESIMAGE)
+droidcore: $(INSTALLED_QEMU_PRODUCT_SERVICESIMAGE)
+endif
+ifeq ($(BOARD_USES_ODMIMAGE),true)
+INSTALLED_QEMU_ODMIMAGE := $(PRODUCT_OUT)/odm-qemu.img
+$(INSTALLED_QEMU_ODMIMAGE): $(INSTALLED_ODMIMAGE_TARGET) $(MK_QEMU_IMAGE_SH) $(SGDISK_HOST)
+	@echo Create odm-qemu.img
+	(export SGDISK=$(SGDISK_HOST); $(MK_QEMU_IMAGE_SH) ${PRODUCT_OUT}/odm.img)
+
+odmimage: $(INSTALLED_QEMU_ODMIMAGE)
+droidcore: $(INSTALLED_QEMU_ODMIMAGE)
+endif
+
+ifeq ($(BOARD_AVB_ENABLE),true)
+QEMU_VERIFIED_BOOT_PARAMS := $(PRODUCT_OUT)/VerifiedBootParams.textproto
+MK_VERIFIED_BOOT_KERNEL_CMDLINE_SH := device/generic/goldfish/tools/mk_verified_boot_params.sh
+$(QEMU_VERIFIED_BOOT_PARAMS): $(INSTALLED_QEMU_SYSTEMIMAGE) $(MK_VERIFIED_BOOT_KERNEL_CMDLINE_SH) $(INSTALLED_VBMETAIMAGE_TARGET) $(SGDISK_HOST) $(AVBTOOL)
+	@echo Creating $@
+	(export SGDISK=$(SGDISK_HOST) AVBTOOL=$(AVBTOOL); $(MK_VERIFIED_BOOT_KERNEL_CMDLINE_SH) $(INSTALLED_VBMETAIMAGE_TARGET) $(INSTALLED_QEMU_SYSTEMIMAGE) $(QEMU_VERIFIED_BOOT_PARAMS))
+
+
+systemimage: $(QEMU_VERIFIED_BOOT_PARAMS)
+droidcore: $(QEMU_VERIFIED_BOOT_PARAMS)
+endif
 endif
 # -----------------------------------------------------------------
 # The emulator package
@@ -3085,8 +4128,8 @@
         $(HOST_OUT_EXECUTABLES)/emulator$(HOST_EXECUTABLE_SUFFIX) \
         prebuilts/qemu-kernel/$(TARGET_ARCH)/kernel-qemu \
         $(INSTALLED_RAMDISK_TARGET) \
-		$(INSTALLED_SYSTEMIMAGE) \
-		$(INSTALLED_USERDATAIMAGE_TARGET)
+        $(INSTALLED_SYSTEMIMAGE_TARGET) \
+        $(INSTALLED_USERDATAIMAGE_TARGET)
 
 name := $(TARGET_PRODUCT)-emulator-$(FILE_NAME_TAG)
 
@@ -3140,6 +4183,7 @@
 	$(ALL_DEFAULT_INSTALLED_MODULES) \
 	$(INSTALLED_RAMDISK_TARGET) \
 	$(ALL_DOCS) \
+	$(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/api-stubs-docs_annotations.zip \
 	$(ALL_SDK_FILES)
 endif
 
@@ -3172,9 +4216,11 @@
 	$(OUT_DOCS)/offline-sdk-timestamp \
 	$(SYMBOLS_ZIP) \
 	$(COVERAGE_ZIP) \
-	$(INSTALLED_SYSTEMIMAGE) \
+	$(APPCOMPAT_ZIP) \
+	$(INSTALLED_SYSTEMIMAGE_TARGET) \
 	$(INSTALLED_QEMU_SYSTEMIMAGE) \
 	$(INSTALLED_QEMU_VENDORIMAGE) \
+	$(QEMU_VERIFIED_BOOT_PARAMS) \
 	$(INSTALLED_USERDATAIMAGE_TARGET) \
 	$(INSTALLED_RAMDISK_TARGET) \
 	$(INSTALLED_SDK_BUILD_PROP_TARGET) \
@@ -3208,29 +4254,29 @@
 	if [ $$FAIL ]; then exit 1; fi
 	$(hide) echo $(notdir $(SDK_FONT_DEPS)) | tr " " "\n"  > $(SDK_FONT_TEMP)/fontsInSdk.txt
 	$(hide) ( \
-		ATREE_STRIP="strip -x" \
-		$(HOST_OUT_EXECUTABLES)/atree \
-		$(addprefix -f ,$(PRIVATE_INPUT_FILES)) \
-			-m $(PRIVATE_DEP_FILE) \
-			-I . \
-			-I $(PRODUCT_OUT) \
-			-I $(HOST_OUT) \
-			-I $(TARGET_COMMON_OUT_ROOT) \
-			-v "PLATFORM_NAME=android-$(PLATFORM_VERSION)" \
-			-v "OUT_DIR=$(OUT_DIR)" \
-			-v "HOST_OUT=$(HOST_OUT)" \
-			-v "TARGET_ARCH=$(TARGET_ARCH)" \
-			-v "TARGET_CPU_ABI=$(TARGET_CPU_ABI)" \
-			-v "DLL_EXTENSION=$(HOST_SHLIB_SUFFIX)" \
-			-v "FONT_OUT=$(SDK_FONT_TEMP)" \
-			-o $(PRIVATE_DIR) && \
-		cp -f $(target_notice_file_txt) \
-				$(PRIVATE_DIR)/system-images/android-$(PLATFORM_VERSION)/$(TARGET_CPU_ABI)/NOTICE.txt && \
-		cp -f $(tools_notice_file_txt) $(PRIVATE_DIR)/platform-tools/NOTICE.txt && \
-		HOST_OUT_EXECUTABLES=$(HOST_OUT_EXECUTABLES) HOST_OS=$(HOST_OS) \
-			development/build/tools/sdk_clean.sh $(PRIVATE_DIR) && \
-		chmod -R ug+rwX $(PRIVATE_DIR) && \
-		cd $(dir $@) && zip -rqX $(notdir $@) $(PRIVATE_NAME) \
+	    ATREE_STRIP="$(HOST_STRIP) -x" \
+	    $(HOST_OUT_EXECUTABLES)/atree \
+	    $(addprefix -f ,$(PRIVATE_INPUT_FILES)) \
+	        -m $(PRIVATE_DEP_FILE) \
+	        -I . \
+	        -I $(PRODUCT_OUT) \
+	        -I $(HOST_OUT) \
+	        -I $(TARGET_COMMON_OUT_ROOT) \
+	        -v "PLATFORM_NAME=android-$(PLATFORM_VERSION)" \
+	        -v "OUT_DIR=$(OUT_DIR)" \
+	        -v "HOST_OUT=$(HOST_OUT)" \
+	        -v "TARGET_ARCH=$(TARGET_ARCH)" \
+	        -v "TARGET_CPU_ABI=$(TARGET_CPU_ABI)" \
+	        -v "DLL_EXTENSION=$(HOST_SHLIB_SUFFIX)" \
+	        -v "FONT_OUT=$(SDK_FONT_TEMP)" \
+	        -o $(PRIVATE_DIR) && \
+	    cp -f $(target_notice_file_txt) \
+	            $(PRIVATE_DIR)/system-images/android-$(PLATFORM_VERSION)/$(TARGET_CPU_ABI)/NOTICE.txt && \
+	    cp -f $(tools_notice_file_txt) $(PRIVATE_DIR)/platform-tools/NOTICE.txt && \
+	    HOST_OUT_EXECUTABLES=$(HOST_OUT_EXECUTABLES) HOST_OS=$(HOST_OS) \
+	        development/build/tools/sdk_clean.sh $(PRIVATE_DIR) && \
+	    chmod -R ug+rwX $(PRIVATE_DIR) && \
+	    cd $(dir $@) && zip -rqX $(notdir $@) $(PRIVATE_NAME) \
 	) || ( rm -rf $(PRIVATE_DIR) $@ && exit 44 )
 
 
@@ -3288,4 +4334,4 @@
 # Find lsdump paths
 FIND_LSDUMPS_FILE := $(PRODUCT_OUT)/lsdump_paths.txt
 $(FIND_LSDUMPS_FILE) : $(LSDUMP_PATHS)
-	$(hide) rm -rf $@ && echo "$^" > $@
+	$(hide) rm -rf $@ && echo "$^" | sed -e 's/ /\n/g' > $@
diff --git a/core/OWNERS b/core/OWNERS
new file mode 100644
index 0000000..570ede8
--- /dev/null
+++ b/core/OWNERS
@@ -0,0 +1 @@
+per-file dex_preopt*.mk = ngeoffray@google.com,calin@google.com,mathewi@google.com,dbrazdil@google.com
diff --git a/core/aapt2.mk b/core/aapt2.mk
index b3a7c93..fbbf3dd 100644
--- a/core/aapt2.mk
+++ b/core/aapt2.mk
@@ -64,9 +64,11 @@
 $(my_res_resources_flat) $(my_overlay_resources_flat) $(my_resources_flata): \
   PRIVATE_AAPT2_CFLAGS := --pseudo-localize
 
-my_static_library_resources := $(foreach l, $(call reverse-list,$(LOCAL_STATIC_ANDROID_LIBRARIES)),\
+# TODO(b/78447299): Forbid LOCAL_STATIC_JAVA_AAR_LIBRARIES in aapt2 and remove
+# support for it.
+my_static_library_resources := $(foreach l, $(call reverse-list,$(LOCAL_STATIC_ANDROID_LIBRARIES) $(LOCAL_STATIC_JAVA_AAR_LIBRARIES)),\
   $(call intermediates-dir-for,JAVA_LIBRARIES,$(l),,COMMON)/package-res.apk)
-my_static_library_extra_packages := $(foreach l, $(call reverse-list,$(LOCAL_STATIC_ANDROID_LIBRARIES)),\
+my_static_library_extra_packages := $(foreach l, $(call reverse-list,$(LOCAL_STATIC_ANDROID_LIBRARIES) $(LOCAL_STATIC_JAVA_AAR_LIBRARIES)),\
   $(call intermediates-dir-for,JAVA_LIBRARIES,$(l),,COMMON)/extra_packages)
 my_shared_library_resources := $(foreach l, $(LOCAL_SHARED_ANDROID_LIBRARIES),\
   $(call intermediates-dir-for,JAVA_LIBRARIES,$(l),,COMMON)/package-res.apk)
diff --git a/core/android_manifest.mk b/core/android_manifest.mk
index 7d573d3..c3af942 100644
--- a/core/android_manifest.mk
+++ b/core/android_manifest.mk
@@ -6,40 +6,95 @@
   LOCAL_MANIFEST_FILE := AndroidManifest.xml
 endif
 ifdef LOCAL_FULL_MANIFEST_FILE
-  full_android_manifest := $(LOCAL_FULL_MANIFEST_FILE)
+  main_android_manifest := $(LOCAL_FULL_MANIFEST_FILE)
 else
-  full_android_manifest := $(LOCAL_PATH)/$(LOCAL_MANIFEST_FILE)
+  main_android_manifest := $(LOCAL_PATH)/$(LOCAL_MANIFEST_FILE)
 endif
 
-my_full_libs_manifest_files := $(LOCAL_FULL_LIBS_MANIFEST_FILES)
-my_full_libs_manifest_deps := $(LOCAL_FULL_LIBS_MANIFEST_FILES)
-
-# Set up dependency on aar libraries
 LOCAL_STATIC_JAVA_AAR_LIBRARIES := $(strip $(LOCAL_STATIC_JAVA_AAR_LIBRARIES))
-ifdef LOCAL_STATIC_JAVA_AAR_LIBRARIES
-my_full_libs_manifest_deps += $(foreach lib, $(LOCAL_STATIC_JAVA_AAR_LIBRARIES),\
-  $(call intermediates-dir-for,JAVA_LIBRARIES,$(lib),,COMMON)/aar/classes.jar)
-my_full_libs_manifest_files += $(foreach lib, $(LOCAL_STATIC_JAVA_AAR_LIBRARIES),\
-  $(call intermediates-dir-for,JAVA_LIBRARIES,$(lib),,COMMON)/aar/AndroidManifest.xml)
+
+my_full_libs_manifest_files :=
+
+ifndef LOCAL_DONT_MERGE_MANIFESTS
+  my_full_libs_manifest_files += $(LOCAL_FULL_LIBS_MANIFEST_FILES)
+
+  my_full_libs_manifest_files += $(foreach lib, $(LOCAL_STATIC_JAVA_AAR_LIBRARIES) $(LOCAL_STATIC_ANDROID_LIBRARIES),\
+    $(call intermediates-dir-for,JAVA_LIBRARIES,$(lib),,COMMON)/manifest/AndroidManifest.xml)
+endif
 
 # With aapt2, we'll link in the built resource from the AAR.
-ifndef LOCAL_USE_AAPT2
-LOCAL_RESOURCE_DIR += $(foreach lib, $(LOCAL_STATIC_JAVA_AAR_LIBRARIES),\
-  $(call intermediates-dir-for,JAVA_LIBRARIES,$(lib),,COMMON)/aar/res)
-endif  # LOCAL_USE_AAPT2
-endif  # LOCAL_STATIC_JAVA_AAR_LIBRARIES
+ifneq ($(LOCAL_USE_AAPT2),true)
+  LOCAL_RESOURCE_DIR += $(foreach lib, $(LOCAL_STATIC_JAVA_AAR_LIBRARIES),\
+    $(call intermediates-dir-for,JAVA_LIBRARIES,$(lib),,COMMON)/aar/res)
+endif
 
-# Set up rules to merge library manifest files
-ifdef my_full_libs_manifest_files
-main_android_manifest := $(full_android_manifest)
-full_android_manifest := $(intermediates.COMMON)/AndroidManifest.xml
-$(full_android_manifest): PRIVATE_LIBS_MANIFESTS := $(my_full_libs_manifest_files)
-$(full_android_manifest): $(ANDROID_MANIFEST_MERGER_CLASSPATH)
-$(full_android_manifest) : $(main_android_manifest) $(my_full_libs_manifest_deps)
+full_android_manifest := $(intermediates.COMMON)/manifest/AndroidManifest.xml
+
+ifneq (,$(strip $(my_full_libs_manifest_files)))
+  # Set up rules to merge library manifest files
+  fixed_android_manifest := $(intermediates.COMMON)/manifest/AndroidManifest.xml.fixed
+
+  $(full_android_manifest): PRIVATE_LIBS_MANIFESTS := $(my_full_libs_manifest_files)
+  $(full_android_manifest): $(ANDROID_MANIFEST_MERGER_DEPS)
+  $(full_android_manifest) : $(fixed_android_manifest) $(my_full_libs_manifest_files)
 	@echo "Merge android manifest files: $@ <-- $< $(PRIVATE_LIBS_MANIFESTS)"
 	@mkdir -p $(dir $@)
 	$(hide) $(ANDROID_MANIFEST_MERGER) --main $< \
 	    --libs $(call normalize-path-list,$(PRIVATE_LIBS_MANIFESTS)) \
 	    --out $@
-
+else
+  fixed_android_manifest := $(full_android_manifest)
 endif
+
+ifdef LOCAL_MIN_SDK_VERSION
+  $(fixed_android_manifest): PRIVATE_MIN_SDK_VERSION := $(LOCAL_MIN_SDK_VERSION)
+else ifneq (,$(filter-out current system_current test_current core_current, $(LOCAL_SDK_VERSION)))
+  $(fixed_android_manifest): PRIVATE_MIN_SDK_VERSION := $(call get-numeric-sdk-version,$(LOCAL_SDK_VERSION))
+else
+  $(fixed_android_manifest): PRIVATE_MIN_SDK_VERSION := $(DEFAULT_APP_TARGET_SDK)
+endif
+
+ifneq (,$(filter-out current system_current test_current core_current, $(LOCAL_SDK_VERSION)))
+  $(fixed_android_manifest): PRIVATE_TARGET_SDK_VERSION := $(call get-numeric-sdk-version,$(LOCAL_SDK_VERSION))
+else
+  $(fixed_android_manifest): PRIVATE_TARGET_SDK_VERSION := $(DEFAULT_APP_TARGET_SDK)
+endif
+
+my_exported_sdk_libs_file := $(call local-intermediates-dir,COMMON)/exported-sdk-libs
+$(fixed_android_manifest): PRIVATE_EXPORTED_SDK_LIBS_FILE := $(my_exported_sdk_libs_file)
+$(fixed_android_manifest): $(my_exported_sdk_libs_file)
+
+my_manifest_fixer_flags :=
+ifneq ($(LOCAL_MODULE_CLASS),APPS)
+    my_manifest_fixer_flags += --library
+endif
+ifeq ($(LOCAL_PRIVATE_PLATFORM_APIS),true)
+    my_manifest_fixer_flags += --uses-non-sdk-api
+endif
+
+ifeq (true,$(LOCAL_PREFER_INTEGRITY))
+    my_manifest_fixer_flags += --prefer-integrity
+endif
+
+$(fixed_android_manifest): PRIVATE_MANIFEST_FIXER_FLAGS := $(my_manifest_fixer_flags)
+# These two libs are added as optional dependencies (<uses-library> with
+# android:required set to false). This is because they haven't existed in pre-P
+# devices, but classes in them were in bootclasspath jars, etc. So making them
+# hard dependencies (andriod:required=true) would prevent apps from being
+# installed to such legacy devices.
+$(fixed_android_manifest): PRIVATE_OPTIONAL_SDK_LIB_NAMES := android.test.base android.test.mock
+$(fixed_android_manifest): $(MANIFEST_FIXER)
+$(fixed_android_manifest): $(main_android_manifest)
+	echo $(PRIVATE_OPTIONAL_SDK_LIB_NAMES) | tr ' ' '\n' > $(PRIVATE_EXPORTED_SDK_LIBS_FILE).optional
+	@echo "Fix manifest: $@"
+	$(MANIFEST_FIXER) \
+	  --minSdkVersion $(PRIVATE_MIN_SDK_VERSION) \
+          --targetSdkVersion $(PRIVATE_TARGET_SDK_VERSION) \
+          --raise-min-sdk-version \
+	  $(PRIVATE_MANIFEST_FIXER_FLAGS) \
+	  $(if (PRIVATE_EXPORTED_SDK_LIBS_FILE),\
+	    $$(cat $(PRIVATE_EXPORTED_SDK_LIBS_FILE) | grep -v -f $(PRIVATE_EXPORTED_SDK_LIBS_FILE).optional | sort -u | sed -e 's/^/\ --uses-library\ /' | tr '\n' ' ') \
+	    $$(cat $(PRIVATE_EXPORTED_SDK_LIBS_FILE) | grep -f $(PRIVATE_EXPORTED_SDK_LIBS_FILE).optional | sort -u | sed -e 's/^/\ --optional-uses-library\ /' | tr '\n' ' ') \
+	   ) \
+	  $< $@
+	rm $(PRIVATE_EXPORTED_SDK_LIBS_FILE).optional
diff --git a/core/apicheck_msg_current.txt b/core/apicheck_msg_current.txt
deleted file mode 100644
index 440e7f8..0000000
--- a/core/apicheck_msg_current.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-
-******************************
-You have tried to change the API from what has been previously approved.
-
-To make these errors go away, you have two choices:
-   1) You can add "@hide" javadoc comments to the methods, etc. listed in the
-      errors above.
-
-   2) You can update current.txt by executing the following command:
-         make update-api
-
-      To submit the revised current.txt to the main Android repository,
-      you will need approval.
-******************************
-
-
-
diff --git a/core/apicheck_msg_last.txt b/core/apicheck_msg_last.txt
deleted file mode 100644
index 2993157..0000000
--- a/core/apicheck_msg_last.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-
-******************************
-You have tried to change the API from what has been previously released in
-an SDK.  Please fix the errors listed above.
-******************************
-
-
diff --git a/core/apidiff.mk b/core/apidiff.mk
deleted file mode 100644
index 36d75fe..0000000
--- a/core/apidiff.mk
+++ /dev/null
@@ -1,181 +0,0 @@
-#
-# Copyright (C) 2017 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-##
-##
-## Common to both jdiff and javadoc
-##
-##
-
-LOCAL_IS_HOST_MODULE := $(call true-or-empty,$(LOCAL_IS_HOST_MODULE))
-ifeq ($(LOCAL_IS_HOST_MODULE),true)
-my_prefix := HOST_
-LOCAL_HOST_PREFIX :=
-else
-my_prefix := TARGET_
-endif
-
-LOCAL_MODULE_CLASS := $(strip $(LOCAL_MODULE_CLASS))
-ifndef LOCAL_MODULE_CLASS
-$(error $(LOCAL_PATH): LOCAL_MODULE_CLASS not defined)
-endif
-
-full_src_files := $(patsubst %,$(LOCAL_PATH)/%,$(LOCAL_SRC_FILES))
-out_dir := $(OUT_DOCS)/$(LOCAL_MODULE)/api_diff/current
-full_target := $(call doc-timestamp-for,$(LOCAL_MODULE)-diff)
-
-ifeq ($(LOCAL_IS_HOST_MODULE),true)
-$(full_target): PRIVATE_BOOTCLASSPATH :=
-full_java_libs := $(addprefix $(HOST_OUT_JAVA_LIBRARIES)/,\
-  $(addsuffix $(COMMON_JAVA_PACKAGE_SUFFIX),$(LOCAL_JAVA_LIBRARIES)))
-full_java_lib_deps := $(full_java_libs)
-
-else
-
-ifneq ($(LOCAL_SDK_VERSION),)
-  ifeq ($(LOCAL_SDK_VERSION)$(TARGET_BUILD_APPS),current)
-    # Use android_stubs_current if LOCAL_SDK_VERSION is current and no TARGET_BUILD_APPS.
-    LOCAL_JAVA_LIBRARIES := android_stubs_current $(LOCAL_JAVA_LIBRARIES)
-    $(full_target): PRIVATE_BOOTCLASSPATH := $(call java-lib-files, android_stubs_current)
-  else ifeq ($(LOCAL_SDK_VERSION)$(TARGET_BUILD_APPS),system_current)
-    LOCAL_JAVA_LIBRARIES := android_system_stubs_current $(LOCAL_JAVA_LIBRARIES)
-    $(full_target): PRIVATE_BOOTCLASSPATH := $(call java-lib-files, android_system_stubs_current)
-  else ifeq ($(LOCAL_SDK_VERSION)$(TARGET_BUILD_APPS),test_current)
-    LOCAL_JAVA_LIBRARIES := android_test_stubs_current $(LOCAL_JAVA_LIBRARIES)
-    $(full_target): PRIVATE_BOOTCLASSPATH := $(call java-lib-files, android_test_stubs_current)
-  else
-    # core_<ver> is subset of <ver>. Instead of defining a prebuilt lib for core_<ver>,
-    # use the stub for <ver> when building for apps.
-    _version := $(patsubst core_%,%,$(LOCAL_SDK_VERSION))
-    LOCAL_JAVA_LIBRARIES := sdk_v$(_version) $(LOCAL_JAVA_LIBRARIES)
-    $(full_target): PRIVATE_BOOTCLASSPATH := $(call java-lib-files, sdk_v$(_version))
-    _version :=
-  endif
-else
-  LOCAL_JAVA_LIBRARIES := core-oj core-libart ext framework $(LOCAL_JAVA_LIBRARIES)
-  $(full_target): PRIVATE_BOOTCLASSPATH := $(call java-lib-files, core-oj):$(call java-lib-files, core-libart)
-endif  # LOCAL_SDK_VERSION
-LOCAL_JAVA_LIBRARIES := $(sort $(LOCAL_JAVA_LIBRARIES))
-
-full_java_libs := $(call java-lib-files,$(LOCAL_JAVA_LIBRARIES)) $(LOCAL_CLASSPATH)
-full_java_lib_deps := $(call java-lib-deps,$(LOCAL_JAVA_LIBRARIES)) $(LOCAL_CLASSPATH)
-endif # !LOCAL_IS_HOST_MODULE
-
-$(full_target): PRIVATE_CLASSPATH := $(subst $(space),:,$(full_java_libs))
-$(full_target): PRIVATE_DOCLAVA_CLASSPATH := $(HOST_OUT_JAVA_LIBRARIES)/jsilver$(COMMON_JAVA_PACKAGE_SUFFIX):$(HOST_OUT_JAVA_LIBRARIES)/doclava$(COMMON_JAVA_PACKAGE_SUFFIX)
-
-intermediates.COMMON := $(call local-intermediates-dir,COMMON)
-
-$(full_target): PRIVATE_SOURCE_PATH := $(call normalize-path-list,$(LOCAL_DROIDDOC_SOURCE_PATH))
-$(full_target): PRIVATE_JAVA_FILES := $(filter %.java,$(full_src_files))
-$(full_target): PRIVATE_JAVA_FILES += $(addprefix $($(my_prefix)OUT_COMMON_INTERMEDIATES)/, $(filter %.java,$(LOCAL_INTERMEDIATE_SOURCES)))
-$(full_target): PRIVATE_SOURCE_INTERMEDIATES_DIR := $(intermediates.COMMON)/src
-$(full_target): PRIVATE_SRC_LIST_FILE := $(intermediates.COMMON)/droiddoc-src-list
-
-ifneq ($(strip $(LOCAL_ADDITIONAL_JAVA_DIR)),)
-$(full_target): PRIVATE_ADDITIONAL_JAVA_DIR := $(LOCAL_ADDITIONAL_JAVA_DIR)
-endif
-
-# Lists the input files for the doc build into a text file
-# suitable for the @ syntax of javadoc.
-# $(1): the file to create
-# $(2): files to include
-# $(3): list of directories to search for java files in
-define prepare-doc-source-list
-$(hide) mkdir -p $(dir $(1))
-$(call dump-words-to-file, $(2), $(1))
-$(hide) for d in $(3) ; do find $$d -name '*.java' -and -not -name '.*' >> $(1) 2> /dev/null ; done ; true
-endef
-
-##
-##
-## jdiff only
-##
-##
-
-jdiff := \
-	$(HOST_JDK_TOOLS_JAR) \
-	$(HOST_OUT_JAVA_LIBRARIES)/jdiff$(COMMON_JAVA_PACKAGE_SUFFIX)
-
-doclava := \
-	$(HOST_JDK_TOOLS_JAR) \
-	$(HOST_OUT_JAVA_LIBRARIES)/doclava$(COMMON_JAVA_PACKAGE_SUFFIX)
-
-$(full_target): PRIVATE_NEWAPI := $(LOCAL_APIDIFF_NEWAPI)
-$(full_target): PRIVATE_OLDAPI := $(LOCAL_APIDIFF_OLDAPI)
-$(full_target): PRIVATE_OUT_DIR := $(out_dir)
-$(full_target): PRIVATE_OUT_NEWAPI := $(out_dir)/current.xml
-$(full_target): PRIVATE_OUT_OLDAPI := $(out_dir)/$(notdir $(basename $(LOCAL_APIDIFF_OLDAPI))).xml
-$(full_target): PRIVATE_DOCLETPATH := $(HOST_OUT_JAVA_LIBRARIES)/jdiff$(COMMON_JAVA_PACKAGE_SUFFIX)
-$(full_target): \
-		$(full_src_files) \
-		$(full_java_lib_deps) \
-		$(jdiff) \
-		$(doclava) \
-		$(LOCAL_MODULE)-docs \
-		$(LOCAL_ADDITIONAL_DEPENDENCIES)
-	@echo Generating API diff: $(PRIVATE_OUT_DIR)
-	@echo   Old API: $(PRIVATE_OLDAPI)
-	@echo   New API: $(PRIVATE_NEWAPI)
-	@echo   Old XML: $(PRIVATE_OUT_OLDAPI)
-	@echo   New XML: $(PRIVATE_OUT_NEWAPI)
-	$(hide) mkdir -p $(dir $@)
-	@echo Converting API files to XML...
-	$(hide) mkdir -p $(PRIVATE_OUT_DIR)
-	$(hide) ( \
-		$(JAVA) \
-				$(addprefix -classpath ,$(PRIVATE_CLASSPATH):$(PRIVATE_DOCLAVA_CLASSPATH):$(PRIVATE_BOOTCLASSPATH):$(HOST_JDK_TOOLS_JAR)) \
-				com.google.doclava.apicheck.ApiCheck \
-				-convert2xml \
-					$(basename $(PRIVATE_NEWAPI)).txt \
-					$(basename $(PRIVATE_OUT_NEWAPI)).xml \
-	) || (rm -rf $(PRIVATE_OUT_DIR) $(PRIVATE_SRC_LIST_FILE); exit 45)
-	$(hide) ( \
-		$(JAVA) \
-				$(addprefix -classpath ,$(PRIVATE_CLASSPATH):$(PRIVATE_DOCLAVA_CLASSPATH):$(PRIVATE_BOOTCLASSPATH):$(HOST_JDK_TOOLS_JAR)) \
-				com.google.doclava.apicheck.ApiCheck \
-				-convert2xml \
-					$(basename $(PRIVATE_OLDAPI)).txt \
-					$(basename $(PRIVATE_OUT_OLDAPI)).xml \
-	) || (rm -rf $(PRIVATE_OUT_DIR) $(PRIVATE_SRC_LIST_FILE); exit 45)
-	@echo Running JDiff...
-	$(call prepare-doc-source-list,$(PRIVATE_SRC_LIST_FILE),$(PRIVATE_JAVA_FILES), \
-			$(PRIVATE_SOURCE_INTERMEDIATES_DIR) $(PRIVATE_ADDITIONAL_JAVA_DIR))
-	$(hide) ( \
-		$(JAVADOC) \
-				-encoding UTF-8 \
-				\@$(PRIVATE_SRC_LIST_FILE) \
-				-J-Xmx1600m \
-				-XDignore.symbol.file \
-				-quiet \
-				-doclet jdiff.JDiff \
-				-docletpath $(PRIVATE_DOCLETPATH) \
-				$(addprefix -bootclasspath ,$(PRIVATE_BOOTCLASSPATH)) \
-				$(addprefix -classpath ,$(PRIVATE_CLASSPATH)) \
-				-sourcepath $(PRIVATE_SOURCE_PATH)$(addprefix :,$(PRIVATE_CLASSPATH)) \
-				-d $(PRIVATE_OUT_DIR) \
-				-newapi $(notdir $(basename $(PRIVATE_OUT_NEWAPI))) \
-				-newapidir $(dir $(PRIVATE_OUT_NEWAPI)) \
-				-oldapi $(notdir $(basename $(PRIVATE_OUT_OLDAPI))) \
-				-oldapidir $(dir $(PRIVATE_OUT_OLDAPI)) \
-				-javadocnew ../../../reference/ \
-		&& touch -f $@ \
-	) || (rm -rf $(PRIVATE_OUT_DIR) $(PRIVATE_SRC_LIST_FILE); exit 45)
-
-ALL_DOCS += $(full_target)
-
-.PHONY: $(LOCAL_MODULE)-diff
-$(LOCAL_MODULE)-diff : $(full_target)
diff --git a/core/autogen_test_config.mk b/core/autogen_test_config.mk
index c359bac..a01d80f 100644
--- a/core/autogen_test_config.mk
+++ b/core/autogen_test_config.mk
@@ -17,48 +17,49 @@
 # This build rule allows TradeFed test config file to be created based on
 # following inputs:
 #   is_native: If the test is a native test.
-#   LOCAL_MANIFEST_FILE: Name of the AndroidManifest file for the test. If it's
-#       not set, default value `AndroidManifest.xml` will be used.
+#   full_android_manifest: Name of the AndroidManifest file for the test.
 # Output:
 #   autogen_test_config_file: Path to the test config file generated.
 
 autogen_test_config_file := $(dir $(LOCAL_BUILT_MODULE))$(LOCAL_MODULE).config
 ifeq (true,$(is_native))
+ifeq ($(LOCAL_NATIVE_BENCHMARK),true)
+autogen_test_config_template := $(NATIVE_BENCHMARK_TEST_CONFIG_TEMPLATE)
+else
+  ifeq ($(LOCAL_IS_HOST_MODULE),true)
+    autogen_test_config_template := $(NATIVE_HOST_TEST_CONFIG_TEMPLATE)
+  else
+    autogen_test_config_template := $(NATIVE_TEST_CONFIG_TEMPLATE)
+  endif
+endif
 # Auto generating test config file for native test
-$(autogen_test_config_file) : $(NATIVE_TEST_CONFIG_TEMPLATE)
+$(autogen_test_config_file): PRIVATE_MODULE_NAME := $(LOCAL_MODULE)
+$(autogen_test_config_file) : $(autogen_test_config_template)
 	@echo "Auto generating test config $(notdir $@)"
-	$(hide) sed 's&{MODULE}&$(PRIVATE_MODULE)&g' $^ > $@
+	$(hide) sed 's&{MODULE}&$(PRIVATE_MODULE_NAME)&g' $< > $@
 my_auto_generate_config := true
 else
 # Auto generating test config file for instrumentation test
-ifeq ($(strip $(LOCAL_MANIFEST_FILE)),)
-  LOCAL_MANIFEST_FILE := AndroidManifest.xml
-endif
-ifdef LOCAL_FULL_MANIFEST_FILE
-  my_android_manifest := $(LOCAL_FULL_MANIFEST_FILE)
-else
-  my_android_manifest := $(LOCAL_PATH)/$(LOCAL_MANIFEST_FILE)
-endif
-ifneq (,$(wildcard $(my_android_manifest)))
+ifneq (,$(full_android_manifest))
 $(autogen_test_config_file): PRIVATE_AUTOGEN_TEST_CONFIG_SCRIPT := $(AUTOGEN_TEST_CONFIG_SCRIPT)
-$(autogen_test_config_file): PRIVATE_TEST_CONFIG_ANDROID_MANIFEST := $(my_android_manifest)
+$(autogen_test_config_file): PRIVATE_TEST_CONFIG_ANDROID_MANIFEST := $(full_android_manifest)
 $(autogen_test_config_file): PRIVATE_EMPTY_TEST_CONFIG := $(EMPTY_TEST_CONFIG)
 $(autogen_test_config_file): PRIVATE_TEMPLATE := $(INSTRUMENTATION_TEST_CONFIG_TEMPLATE)
-$(autogen_test_config_file) : $(my_android_manifest) $(EMPTY_TEST_CONFIG) $(INSTRUMENTATION_TEST_CONFIG_TEMPLATE) $(AUTOGEN_TEST_CONFIG_SCRIPT)
+$(autogen_test_config_file) : $(full_android_manifest) $(EMPTY_TEST_CONFIG) $(INSTRUMENTATION_TEST_CONFIG_TEMPLATE) $(AUTOGEN_TEST_CONFIG_SCRIPT)
 	@echo "Auto generating test config $(notdir $@)"
 	@rm -f $@
 	$(hide) $(PRIVATE_AUTOGEN_TEST_CONFIG_SCRIPT) $@ $(PRIVATE_TEST_CONFIG_ANDROID_MANIFEST) $(PRIVATE_EMPTY_TEST_CONFIG) $(PRIVATE_TEMPLATE)
 my_auto_generate_config := true
-endif # ifeq (,$(wildcard $(my_android_manifest)))
+endif # ifneq (,$(full_android_manifest))
 endif # ifneq (true,$(is_native))
 
 ifeq (true,$(my_auto_generate_config))
   LOCAL_INTERMEDIATE_TARGETS += $(autogen_test_config_file)
   $(LOCAL_BUILT_MODULE): $(autogen_test_config_file)
   ALL_MODULES.$(my_register_name).auto_test_config := true
+  $(my_prefix)$(LOCAL_MODULE_CLASS)_$(LOCAL_MODULE)_autogen := true
 else
   autogen_test_config_file :=
 endif
 
-my_android_manifest :=
 my_auto_generate_config :=
diff --git a/core/aux_config.mk b/core/aux_config.mk
index 6a5cd63..d382ff5 100644
--- a/core/aux_config.mk
+++ b/core/aux_config.mk
@@ -47,7 +47,6 @@
 $(eval AUX_OUT_INTERMEDIATES_$(1) := $(AUX_OUT_$(1))/obj) \
 $(eval AUX_OUT_COMMON_INTERMEDIATES_$(1) := $(AUX_COMMON_OUT_ROOT_$(1))/obj) \
 $(eval AUX_OUT_HEADERS_$(1) := $(AUX_OUT_INTERMEDIATES_$(1))/include) \
-$(eval AUX_OUT_INTERMEDIATE_LIBRARIES_$(1) := $(AUX_OUT_INTERMEDIATES_$(1))/lib) \
 $(eval AUX_OUT_NOTICE_FILES_$(1) := $(AUX_OUT_INTERMEDIATES_$(1))/NOTICE_FILES) \
 $(eval AUX_OUT_FAKE_$(1) := $(AUX_OUT_$(1))/fake_packages) \
 $(eval AUX_OUT_GEN_$(1) := $(AUX_OUT_$(1))/gen) \
@@ -78,7 +77,6 @@
 $(eval AUX_OUT_INTERMEDIATES := $(AUX_OUT_INTERMEDIATES_$(1))) \
 $(eval AUX_OUT_COMMON_INTERMEDIATES := $(AUX_OUT_COMMON_INTERMEDIATES_$(1))) \
 $(eval AUX_OUT_HEADERS := $(AUX_OUT_HEADERS_$(1))) \
-$(eval AUX_OUT_INTERMEDIATE_LIBRARIES := $(AUX_OUT_INTERMEDIATE_LIBRARIES_$(1))) \
 $(eval AUX_OUT_NOTICE_FILES := $(AUX_OUT_NOTICE_FILES_$(1))) \
 $(eval AUX_OUT_FAKE := $(AUX_OUT_FAKE_$(1))) \
 $(eval AUX_OUT_GEN := $(AUX_OUT_GEN_$(1))) \
diff --git a/core/aux_executable.mk b/core/aux_executable.mk
index daf30e7..5395e61 100644
--- a/core/aux_executable.mk
+++ b/core/aux_executable.mk
@@ -80,7 +80,6 @@
     $(linked_module) \
 
 # Define PRIVATE_ variables from global vars
-$(linked_module): PRIVATE_TARGET_OUT_INTERMEDIATE_LIBRARIES := $(AUX_OUT_INTERMEDIATE_LIBRARIES)
 $(linked_module): PRIVATE_POST_LINK_CMD := $(LOCAL_POST_LINK_CMD)
 
 ifeq ($(LOCAL_FORCE_STATIC_EXECUTABLE),true)
diff --git a/core/aux_toolchain.mk b/core/aux_toolchain.mk
index de0b139..c710228 100644
--- a/core/aux_toolchain.mk
+++ b/core/aux_toolchain.mk
@@ -50,4 +50,3 @@
 LOCAL_SYSTEM_SHARED_LIBRARIES :=
 LOCAL_CXX_STL := none
 LOCAL_NO_PIC := true
-LOCAL_NO_LIBCOMPILER_RT := true
diff --git a/core/base_rules.mk b/core/base_rules.mk
index 22e7aef..cb9c35a 100644
--- a/core/base_rules.mk
+++ b/core/base_rules.mk
@@ -31,6 +31,7 @@
 ifeq ($(LOCAL_MODULE),)
   $(error $(LOCAL_PATH): LOCAL_MODULE is not defined)
 endif
+$(call verify-module-name)
 
 LOCAL_IS_HOST_MODULE := $(strip $(LOCAL_IS_HOST_MODULE))
 LOCAL_IS_AUX_MODULE := $(strip $(LOCAL_IS_AUX_MODULE))
@@ -65,6 +66,12 @@
   my_host_cross :=
 endif
 
+ifeq (true, $(LOCAL_PRODUCT_MODULE))
+ifneq (,$(filter $(LOCAL_MODULE),$(PRODUCT_FORCE_PRODUCT_MODULES_TO_SYSTEM_PARTITION)))
+  LOCAL_PRODUCT_MODULE :=
+endif
+endif
+
 _path := $(LOCAL_MODULE_PATH) $(LOCAL_MODULE_PATH_32) $(LOCAL_MODULE_PATH_64)
 ifneq ($(filter $(TARGET_OUT_VENDOR)%,$(_path)),)
 LOCAL_VENDOR_MODULE := true
@@ -74,6 +81,8 @@
 LOCAL_ODM_MODULE := true
 else ifneq ($(filter $(TARGET_OUT_PRODUCT)/%,$(_path)),)
 LOCAL_PRODUCT_MODULE := true
+else ifneq ($(filter $(TARGET_OUT_PRODUCT_SERVICES)/%,$(_path)),)
+LOCAL_PRODUCT_SERVICES_MODULE := true
 endif
 _path :=
 
@@ -204,6 +213,8 @@
   partition_tag := _ODM
 else ifeq (true,$(LOCAL_PRODUCT_MODULE))
   partition_tag := _PRODUCT
+else ifeq (true,$(LOCAL_PRODUCT_SERVICES_MODULE))
+  partition_tag := _PRODUCT_SERVICES
 else ifeq (NATIVE_TESTS,$(LOCAL_MODULE_CLASS))
   partition_tag := _DATA
 else
@@ -266,14 +277,16 @@
 generated_sources_dir := $(call local-generated-sources-dir)
 
 ifneq ($(LOCAL_OVERRIDES_MODULES),)
-  ifeq ($(LOCAL_MODULE_CLASS),EXECUTABLES)
-    ifndef LOCAL_IS_HOST_MODULE
+  ifndef LOCAL_IS_HOST_MODULE
+    ifeq ($(LOCAL_MODULE_CLASS),EXECUTABLES)
       EXECUTABLES.$(LOCAL_MODULE).OVERRIDES := $(strip $(LOCAL_OVERRIDES_MODULES))
+    else ifeq ($(LOCAL_MODULE_CLASS),SHARED_LIBRARIES)
+      SHARED_LIBRARIES.$(LOCAL_MODULE).OVERRIDES := $(strip $(LOCAL_OVERRIDES_MODULES))
     else
-      $(call pretty-error,host modules cannot use LOCAL_OVERRIDES_MODULES)
+      $(call pretty-error,LOCAL_MODULE_CLASS := $(LOCAL_MODULE_CLASS) cannot use LOCAL_OVERRIDES_MODULES)
     endif
   else
-      $(call pretty-error,LOCAL_MODULE_CLASS := $(LOCAL_MODULE_CLASS) cannot use LOCAL_OVERRIDES_MODULES)
+    $(call pretty-error,host modules cannot use LOCAL_OVERRIDES_MODULES)
   endif
 endif
 
@@ -284,16 +297,6 @@
 
 LOCAL_BUILT_MODULE := $(intermediates)/$(my_built_module_stem)
 
-# OVERRIDE_BUILT_MODULE_PATH is only allowed to be used by the
-# internal SHARED_LIBRARIES build files.
-OVERRIDE_BUILT_MODULE_PATH := $(strip $(OVERRIDE_BUILT_MODULE_PATH))
-ifdef OVERRIDE_BUILT_MODULE_PATH
-  ifneq ($(LOCAL_MODULE_CLASS),SHARED_LIBRARIES)
-    $(error $(LOCAL_PATH): Illegal use of OVERRIDE_BUILT_MODULE_PATH)
-  endif
-  $(eval $(call copy-one-file,$(LOCAL_BUILT_MODULE),$(OVERRIDE_BUILT_MODULE_PATH)/$(my_built_module_stem)))
-endif
-
 ifneq (true,$(LOCAL_UNINSTALLABLE_MODULE))
   # Apk and its attachments reside in its own subdir.
   ifeq ($(LOCAL_MODULE_CLASS),APPS)
@@ -317,7 +320,11 @@
 # As .KATI_RESTAT is specified to .toc files and commit-change-for-toc is used,
 # dependent binaries of a .toc file will be rebuilt only when the content of
 # the .toc file is changed.
+#
+# Don't create .toc files for Soong shared libraries, that is handled in
+# Soong and soong_cc_prebuilt.mk
 ###########################################################
+ifneq ($(LOCAL_MODULE_MAKEFILE),$(SOONG_ANDROID_MK))
 ifeq ($(LOCAL_MODULE_CLASS),SHARED_LIBRARIES)
 LOCAL_INTERMEDIATE_TARGETS += $(LOCAL_BUILT_MODULE).toc
 $(LOCAL_BUILT_MODULE).toc: $(LOCAL_BUILT_MODULE)
@@ -328,10 +335,6 @@
 .KATI_RESTAT: $(LOCAL_BUILT_MODULE).toc
 # Build .toc file when using mm, mma, or make $(my_register_name)
 $(my_all_targets): $(LOCAL_BUILT_MODULE).toc
-
-ifdef OVERRIDE_BUILT_MODULE_PATH
-$(eval $(call copy-one-file,$(LOCAL_BUILT_MODULE).toc,$(OVERRIDE_BUILT_MODULE_PATH)/$(my_built_module_stem).toc))
-$(OVERRIDE_BUILT_MODULE_PATH)/$(my_built_module_stem).toc: $(OVERRIDE_BUILT_MODULE_PATH)/$(my_built_module_stem)
 endif
 endif
 
@@ -351,6 +354,7 @@
 ## make clean- targets
 ###########################################################
 cleantarget := clean-$(my_register_name)
+.PHONY: $(cleantarget)
 $(cleantarget) : PRIVATE_MODULE := $(my_register_name)
 $(cleantarget) : PRIVATE_CLEAN_FILES := \
     $(LOCAL_BUILT_MODULE) \
@@ -423,7 +427,7 @@
 # Make sure we only set up the copy rules once, even if another arch variant
 # shares a common LOCAL_INIT_RC.
 my_init_rc_new_pairs := $(filter-out $(ALL_INIT_RC_INSTALLED_PAIRS),$(my_init_rc_pairs))
-my_init_rc_new_installed := $(call copy-many-files,$(my_init_rc_new_pairs))
+my_init_rc_new_installed := $(call copy-many-init-script-files-checked,$(my_init_rc_new_pairs))
 ALL_INIT_RC_INSTALLED_PAIRS += $(my_init_rc_new_pairs)
 
 $(my_all_targets) : $(my_init_rc_installed)
@@ -440,6 +444,30 @@
 endif # !LOCAL_UNINSTALLABLE_MODULE
 
 ###########################################################
+## VINTF manifest fragment goals
+###########################################################
+
+my_vintf_installed:=
+my_vintf_pairs:=
+ifneq (true,$(LOCAL_UNINSTALLABLE_MODULE))
+ifndef LOCAL_IS_HOST_MODULE
+ifneq ($(strip $(LOCAL_VINTF_FRAGMENTS)),)
+
+my_vintf_pairs := $(foreach xml,$(LOCAL_VINTF_FRAGMENTS),$(LOCAL_PATH)/$(xml):$(TARGET_OUT$(partition_tag)_ETC)/vintf/manifest/$(notdir $(xml)))
+my_vintf_installed := $(foreach xml,$(my_vintf_pairs),$(call word-colon,2,$(xml)))
+
+# Only set up copy rules once, even if another arch variant shares it
+my_vintf_new_pairs := $(filter-out $(ALL_VINTF_MANIFEST_FRAGMENTS_LIST),$(my_vintf_pairs))
+my_vintf_new_installed := $(call copy-many-vintf-manifest-files-checked,$(my_vintf_pairs))
+
+ALL_VINTF_MANIFEST_FRAGMENTS_LIST += $(my_vintf_new_pairs)
+
+$(my_all_targets) : $(my_vintf_installed)
+endif # LOCAL_VINTF_FRAGMENTS
+endif # !LOCAL_IS_HOST_MODULE
+endif # !LOCAL_UNINSTALLABLE_MODULE
+
+###########################################################
 ## CHECK_BUILD goals
 ###########################################################
 my_checked_module :=
@@ -482,8 +510,9 @@
       $(eval _src_base := $(call word-colon,1,$(td))), \
       $(eval _src_base := $(LOCAL_PATH)) \
         $(eval _file := $(call word-colon,1,$(td)))) \
-    $(if $(findstring ..,$(_file)),$(error $(LOCAL_MODULE_MAKEFILE): LOCAL_TEST_DATA may not include '..': $(_file))) \
-    $(if $(filter /%,$(_src_base) $(_file)),$(error $(LOCAL_MODULE_MAKEFILE): LOCAL_TEST_DATA may not include absolute paths: $(_src_base) $(_file))) \
+    $(if $(call streq,$(LOCAL_MODULE_MAKEFILE),$(SOONG_ANDROID_MK)),, \
+      $(if $(findstring ..,$(_file)),$(error $(LOCAL_MODULE_MAKEFILE): LOCAL_TEST_DATA may not include '..': $(_file))) \
+      $(if $(filter /%,$(_src_base) $(_file)),$(error $(LOCAL_MODULE_MAKEFILE): LOCAL_TEST_DATA may not include absolute paths: $(_src_base) $(_file)))) \
     $(eval my_test_data_file_pairs := $(my_test_data_file_pairs) $(call append-path,$(_src_base),$(_file)):$(_file)) \
     $(call append-path,$(_src_base),$(_file)):$(call append-path,$(my_module_path),$(_file))))
 
@@ -522,10 +551,6 @@
   is_native := true
   multi_arch := true
 endif
-ifeq ($(LOCAL_MODULE_CLASS),NATIVE_BENCHMARK)
-  is_native := true
-  multi_arch := true
-endif
 ifdef LOCAL_MULTILIB
   multi_arch := true
 endif
@@ -537,22 +562,18 @@
 # The module itself.
 $(foreach suite, $(LOCAL_COMPATIBILITY_SUITE), \
   $(eval my_compat_dist_$(suite) := $(foreach dir, $(call compatibility_suite_dirs,$(suite),$(arch_dir)), \
-    $(LOCAL_BUILT_MODULE):$(dir)/$(my_installed_module_stem))))
+    $(LOCAL_BUILT_MODULE):$(dir)/$(my_installed_module_stem))) \
+  $(eval my_compat_dist_config_$(suite) := ))
 
-# Make sure we only add the files once for multilib modules.
-ifndef $(my_prefix)$(LOCAL_MODULE_CLASS)_$(LOCAL_MODULE)_compat_files
-$(my_prefix)$(LOCAL_MODULE_CLASS)_$(LOCAL_MODULE)_compat_files := true
 
-# LOCAL_COMPATIBILITY_SUPPORT_FILES is a list of <src>[:<dest>].
-$(foreach suite, $(LOCAL_COMPATIBILITY_SUITE), \
-  $(eval my_compat_dist_$(suite) += $(foreach f, $(LOCAL_COMPATIBILITY_SUPPORT_FILES), \
-    $(eval p := $(subst :,$(space),$(f))) \
-    $(eval s := $(word 1,$(p))) \
-    $(eval n := $(or $(word 2,$(p)),$(notdir $(word 1, $(p))))) \
-    $(foreach dir, $(call compatibility_suite_dirs,$(suite)), \
-      $(s):$(dir)/$(n)))))
-
-test_config := $(wildcard $(LOCAL_PATH)/AndroidTest.xml)
+# Auto-generate build config.
+ifneq (,$(LOCAL_FULL_TEST_CONFIG))
+  test_config := $(LOCAL_FULL_TEST_CONFIG)
+else ifneq (,$(LOCAL_TEST_CONFIG))
+  test_config := $(LOCAL_PATH)/$(LOCAL_TEST_CONFIG)
+else
+  test_config := $(wildcard $(LOCAL_PATH)/AndroidTest.xml)
+endif
 ifeq (,$(test_config))
   ifneq (true,$(is_native))
     is_instrumentation_test := true
@@ -579,31 +600,56 @@
     endif
   endif
 endif
-
 is_instrumentation_test :=
 
-ifneq (,$(test_config))
-$(foreach suite, $(LOCAL_COMPATIBILITY_SUITE), \
-  $(eval my_compat_dist_$(suite) += $(foreach dir, $(call compatibility_suite_dirs,$(suite)), \
-    $(test_config):$(dir)/$(LOCAL_MODULE).config)))
-endif
-
-test_config :=
-
-ifneq (,$(wildcard $(LOCAL_PATH)/DynamicConfig.xml))
-$(foreach suite, $(LOCAL_COMPATIBILITY_SUITE), \
-  $(eval my_compat_dist_$(suite) += $(foreach dir, $(call compatibility_suite_dirs,$(suite)), \
-    $(LOCAL_PATH)/DynamicConfig.xml:$(dir)/$(LOCAL_MODULE).dynamic)))
-endif
-
-ifneq (,$(wildcard $(LOCAL_PATH)/$(LOCAL_MODULE)_*.config))
-$(foreach extra_config, $(wildcard $(LOCAL_PATH)/$(LOCAL_MODULE)_*.config), \
+# Make sure we only add the files once for multilib modules.
+ifdef $(my_prefix)$(LOCAL_MODULE_CLASS)_$(LOCAL_MODULE)_compat_files
+  # Sync the auto_test_config value for multilib modules.
+  ifdef $(my_prefix)$(LOCAL_MODULE_CLASS)_$(LOCAL_MODULE)_autogen
+    ALL_MODULES.$(my_register_name).auto_test_config := true
+  endif
+else
+  $(my_prefix)$(LOCAL_MODULE_CLASS)_$(LOCAL_MODULE)_compat_files := true
+  # LOCAL_COMPATIBILITY_SUPPORT_FILES is a list of <src>[:<dest>].
   $(foreach suite, $(LOCAL_COMPATIBILITY_SUITE), \
-    $(eval my_compat_dist_$(suite) += $(foreach dir, $(call compatibility_suite_dirs,$(suite)), \
-      $(extra_config):$(dir)/$(notdir $(extra_config))))))
-endif
+    $(eval my_compat_dist_$(suite) += $(foreach f, $(LOCAL_COMPATIBILITY_SUPPORT_FILES), \
+      $(eval p := $(subst :,$(space),$(f))) \
+      $(eval s := $(word 1,$(p))) \
+      $(eval n := $(or $(word 2,$(p)),$(notdir $(word 1, $(p))))) \
+      $(foreach dir, $(call compatibility_suite_dirs,$(suite)), \
+        $(s):$(dir)/$(n)))))
+
+  ifneq (,$(test_config))
+    $(foreach suite, $(LOCAL_COMPATIBILITY_SUITE), \
+      $(eval my_compat_dist_config_$(suite) += $(foreach dir, $(call compatibility_suite_dirs,$(suite)), \
+        $(test_config):$(dir)/$(LOCAL_MODULE).config)))
+  endif
+
+  ifneq (,$(wildcard $(LOCAL_PATH)/DynamicConfig.xml))
+    $(foreach suite, $(LOCAL_COMPATIBILITY_SUITE), \
+      $(eval my_compat_dist_config_$(suite) += $(foreach dir, $(call compatibility_suite_dirs,$(suite)), \
+        $(LOCAL_PATH)/DynamicConfig.xml:$(dir)/$(LOCAL_MODULE).dynamic)))
+  endif
+
+  ifneq (,$(wildcard $(LOCAL_PATH)/$(LOCAL_MODULE)_*.config))
+  $(foreach extra_config, $(wildcard $(LOCAL_PATH)/$(LOCAL_MODULE)_*.config), \
+    $(foreach suite, $(LOCAL_COMPATIBILITY_SUITE), \
+      $(eval my_compat_dist_config_$(suite) += $(foreach dir, $(call compatibility_suite_dirs,$(suite)), \
+        $(extra_config):$(dir)/$(notdir $(extra_config))))))
+  endif
 endif # $(my_prefix)$(LOCAL_MODULE_CLASS)_$(LOCAL_MODULE)_compat_files
 
+# HACK: pretend a soong LOCAL_FULL_TEST_CONFIG is autogenerated by setting the flag in
+# module-info.json
+# TODO: (b/113029686) Add explicit flag from Soong to determine if a test was
+# autogenerated.
+ifneq (,$(filter $(SOONG_OUT_DIR)%,$(LOCAL_FULL_TEST_CONFIG)))
+  ifeq ($(LOCAL_MODULE_MAKEFILE),$(SOONG_ANDROID_MK))
+    ALL_MODULES.$(my_register_name).auto_test_config := true
+  endif
+endif
+
+
 ifneq ($(my_test_data_file_pairs),)
 $(foreach pair, $(my_test_data_file_pairs), \
   $(eval parts := $(subst :,$(space),$(pair))) \
@@ -618,10 +664,19 @@
 is_native :=
 
 $(call create-suite-dependencies)
+$(foreach suite, $(LOCAL_COMPATIBILITY_SUITE), \
+  $(eval my_compat_dist_config_$(suite) := ))
 
 endif  # LOCAL_COMPATIBILITY_SUITE
 
 ###########################################################
+## Add test module to ALL_DISABLED_PRESUBMIT_TESTS if LOCAL_PRESUBMIT_DISABLED is set to true.
+###########################################################
+ifeq ($(LOCAL_PRESUBMIT_DISABLED),true)
+  ALL_DISABLED_PRESUBMIT_TESTS += $(LOCAL_MODULE)
+endif  # LOCAL_PRESUBMIT_DISABLED
+
+###########################################################
 ## Register with ALL_MODULES
 ###########################################################
 
@@ -643,11 +698,11 @@
 ALL_MODULES.$(my_register_name).INSTALLED := \
     $(strip $(ALL_MODULES.$(my_register_name).INSTALLED) \
     $(LOCAL_INSTALLED_MODULE) $(my_init_rc_installed) $(my_installed_symlinks) \
-    $(my_installed_test_data))
+    $(my_installed_test_data) $(my_vintf_installed))
 ALL_MODULES.$(my_register_name).BUILT_INSTALLED := \
     $(strip $(ALL_MODULES.$(my_register_name).BUILT_INSTALLED) \
     $(LOCAL_BUILT_MODULE):$(LOCAL_INSTALLED_MODULE) \
-    $(my_init_rc_pairs) $(my_test_data_pairs))
+    $(my_init_rc_pairs) $(my_test_data_pairs) $(my_vintf_pairs))
 endif
 ifdef LOCAL_PICKUP_FILES
 # Files or directories ready to pick up by the build system
@@ -655,11 +710,32 @@
 ALL_MODULES.$(my_register_name).PICKUP_FILES := \
     $(ALL_MODULES.$(my_register_name).PICKUP_FILES) $(LOCAL_PICKUP_FILES)
 endif
+
 my_required_modules := $(LOCAL_REQUIRED_MODULES) \
     $(LOCAL_REQUIRED_MODULES_$(TARGET_$(LOCAL_2ND_ARCH_VAR_PREFIX)ARCH))
 ifdef LOCAL_IS_HOST_MODULE
 my_required_modules += $(LOCAL_REQUIRED_MODULES_$($(my_prefix)OS))
 endif
+
+###############################################################################
+## When compiling against the VNDK, add the .vendor suffix to required modules.
+###############################################################################
+ifneq ($(LOCAL_USE_VNDK),)
+  ####################################################
+  ## Soong modules may be built twice, once for /system
+  ## and once for /vendor. If we're using the VNDK,
+  ## switch all soong libraries over to the /vendor
+  ## variant.
+  ####################################################
+  ifneq ($(LOCAL_MODULE_MAKEFILE),$(SOONG_ANDROID_MK))
+    # We don't do this renaming for soong-defined modules since they already
+    # have correct names (with .vendor suffix when necessary) in their
+    # LOCAL_*_LIBRARIES.
+    my_required_modules := $(foreach l,$(my_required_modules),\
+      $(if $(SPLIT_VENDOR.SHARED_LIBRARIES.$(l)),$(l).vendor,$(l)))
+  endif
+endif
+
 ALL_MODULES.$(my_register_name).REQUIRED := \
     $(strip $(ALL_MODULES.$(my_register_name).REQUIRED) $(my_required_modules))
 ALL_MODULES.$(my_register_name).EXPLICITLY_REQUIRED := \
@@ -683,14 +759,17 @@
 ALL_MODULES.$(my_register_name).FOR_2ND_ARCH := true
 endif
 ALL_MODULES.$(my_register_name).FOR_HOST_CROSS := $(my_host_cross)
+ALL_MODULES.$(my_register_name).MODULE_NAME := $(LOCAL_MODULE)
 ALL_MODULES.$(my_register_name).COMPATIBILITY_SUITES := $(LOCAL_COMPATIBILITY_SUITE)
+ALL_MODULES.$(my_register_name).TEST_CONFIG := $(test_config)
+test_config :=
 
 INSTALLABLE_FILES.$(LOCAL_INSTALLED_MODULE).MODULE := $(my_register_name)
 
 ##########################################################
 # Track module-level dependencies.
 # Use $(LOCAL_MODULE) instead of $(my_register_name) to ignore module's bitness.
-ALL_DEPS.MODULES := $(sort $(ALL_DEPS.MODULES) $(LOCAL_MODULE))
+ALL_DEPS.MODULES := $(ALL_DEPS.MODULES) $(LOCAL_MODULE)
 ALL_DEPS.$(LOCAL_MODULE).ALL_DEPS := $(sort \
   $(ALL_MODULES.$(LOCAL_MODULE).ALL_DEPS) \
   $(LOCAL_STATIC_LIBRARIES) \
@@ -744,8 +823,10 @@
 $(j_or_n)-$(h_or_t)-tests $(j_or_n)-tests $(h_or_t)-tests : $(my_checked_module)
 endif
 $(LOCAL_MODULE)-$(h_or_hc_or_t) : $(my_all_targets)
+.PHONY: $(LOCAL_MODULE)-$(h_or_hc_or_t)
 ifeq ($(j_or_n),native)
 $(LOCAL_MODULE)-$(h_or_hc_or_t)$(my_32_64_bit_suffix) : $(my_all_targets)
+.PHONY: $(LOCAL_MODULE)-$(h_or_hc_or_t)$(my_32_64_bit_suffix)
 endif
 endif
 
diff --git a/core/binary.mk b/core/binary.mk
index 61cd5cf..c3878f9 100644
--- a/core/binary.mk
+++ b/core/binary.mk
@@ -7,6 +7,7 @@
 
 #######################################
 include $(BUILD_SYSTEM)/base_rules.mk
+include $(BUILD_SYSTEM)/use_lld_setup.mk
 #######################################
 
 ##################################################
@@ -45,8 +46,8 @@
 my_cflags := $(LOCAL_CFLAGS)
 my_conlyflags := $(LOCAL_CONLYFLAGS)
 my_cppflags := $(LOCAL_CPPFLAGS)
-my_cflags_no_override := $(GLOBAL_CFLAGS_NO_OVERRIDE)
-my_cppflags_no_override := $(GLOBAL_CPPFLAGS_NO_OVERRIDE)
+my_cflags_no_override := $(GLOBAL_CLANG_CFLAGS_NO_OVERRIDE)
+my_cppflags_no_override := $(GLOBAL_CLANG_CPPFLAGS_NO_OVERRIDE)
 my_ldflags := $(LOCAL_LDFLAGS)
 my_ldlibs := $(LOCAL_LDLIBS)
 my_asflags := $(LOCAL_ASFLAGS)
@@ -72,6 +73,32 @@
   my_native_coverage := false
 endif
 
+ifeq ($(strip $(ENABLE_XOM)),true)
+  ifndef LOCAL_IS_HOST_MODULE
+    my_xom := true
+    # Disable XOM in excluded paths.
+    combined_xom_exclude_paths := $(XOM_EXCLUDE_PATHS) \
+                                  $(PRODUCT_XOM_EXCLUDE_PATHS)
+    ifneq ($(strip $(foreach dir,$(subst $(comma),$(space),$(combined_xom_exclude_paths)),\
+           $(filter $(dir)%,$(LOCAL_PATH)))),)
+      my_xom := false
+    endif
+
+    # Allow LOCAL_XOM to override the above
+    ifdef LOCAL_XOM
+      my_xom := $(LOCAL_XOM)
+    endif
+
+    ifeq ($(strip $(my_xom)),true)
+      ifeq (arm64,$(TARGET_$(LOCAL_2ND_ARCH_VAR_PREFIX)ARCH))
+        ifeq ($(my_use_clang_lld),true)
+          my_ldflags += -Wl,-execute-only
+        endif
+      endif
+    endif
+  endif
+endif
+
 my_allow_undefined_symbols := $(strip $(LOCAL_ALLOW_UNDEFINED_SYMBOLS))
 ifdef SANITIZE_HOST
 ifdef LOCAL_IS_HOST_MODULE
@@ -200,7 +227,6 @@
       $(my_ndk_source_root)/cxx-stl/llvm-libc++/include
     my_ndk_stl_include_path += \
       $(my_ndk_source_root)/cxx-stl/llvm-libc++abi/include
-    my_ndk_stl_include_path += $(my_ndk_source_root)/android/support/include
 
     my_libcxx_libdir := \
       $(my_ndk_source_root)/cxx-stl/llvm-libc++/libs/$(my_cpu_variant)
@@ -213,7 +239,13 @@
       my_ndk_stl_shared_lib_fullpath := $(my_libcxx_libdir)/libc++_shared.so
     endif
 
-    my_ndk_stl_static_lib += $(my_libcxx_libdir)/libandroid_support.a
+    ifneq ($(my_ndk_api),current)
+      ifeq ($(call math_lt,$(my_ndk_api),21),true)
+        my_ndk_stl_include_path += $(my_ndk_source_root)/android/support/include
+        my_ndk_stl_static_lib += $(my_libcxx_libdir)/libandroid_support.a
+      endif
+    endif
+
     ifneq (,$(filter armeabi armeabi-v7a,$(my_cpu_variant)))
       my_ndk_stl_static_lib += $(my_libcxx_libdir)/libunwind.a
     endif
@@ -280,13 +312,18 @@
 # all code is position independent, and then those warnings get promoted to
 # errors.
 ifneq ($(LOCAL_NO_PIC),true)
-ifneq ($($(my_prefix)OS),windows)
-ifneq ($(filter EXECUTABLES NATIVE_TESTS,$(LOCAL_MODULE_CLASS)),)
-my_cflags += -fPIE
-else
-my_cflags += -fPIC
-endif
-endif
+  ifneq ($($(my_prefix)OS),windows)
+    ifneq ($(filter EXECUTABLES NATIVE_TESTS,$(LOCAL_MODULE_CLASS)),)
+      my_cflags += -fPIE
+      ifndef BUILD_HOST_static
+        ifneq ($(LOCAL_FORCE_STATIC_EXECUTABLE),true)
+          my_ldflags += -pie
+        endif
+      endif
+    else
+      my_cflags += -fPIC
+    endif
+  endif
 endif
 
 ifdef LOCAL_IS_HOST_MODULE
@@ -331,36 +368,8 @@
 ifdef LOCAL_CLANG_$($(my_prefix)$(LOCAL_2ND_ARCH_VAR_PREFIX)ARCH)
 my_clang := $(strip $(LOCAL_CLANG_$($(my_prefix)$(LOCAL_2ND_ARCH_VAR_PREFIX)ARCH)))
 endif
-
-# if custom toolchain is in use, default is not to use clang, if not explicitly required
-ifneq ($(my_cc)$(my_cxx),)
-    ifeq ($(my_clang),)
-        my_clang := false
-    endif
-endif
-# Issue warning if LOCAL_CLANG* is set to false and the local makefile is not found
-# in the exception project list.
 ifeq ($(my_clang),false)
-    ifeq ($(call find_in_local_clang_exception_projects,$(LOCAL_MODULE_MAKEFILE))$(LOCAL_IS_AUX_MODULE),)
-        $(error $(LOCAL_MODULE_MAKEFILE): $(LOCAL_MODULE): LOCAL_CLANG is set to false)
-    endif
-endif
-
-# clang is enabled by default for host builds
-# enable it unless we've specifically disabled clang above
-ifdef LOCAL_IS_HOST_MODULE
-    ifneq ($($(my_prefix)CLANG_SUPPORTED),true)
-        ifeq ($(my_clang),true)
-            $(call pretty-error,Clang is not yet supported for $($(my_prefix)OS) binaries)
-        endif
-        my_clang := false
-    else
-        ifeq ($(my_clang),)
-            my_clang := true
-        endif
-    endif
-else ifeq ($(my_clang),)
-    my_clang := true
+    $(call pretty-error,LOCAL_CLANG false is no longer supported)
 endif
 
 ifeq ($(LOCAL_C_STD),)
@@ -379,21 +388,6 @@
     my_cpp_std_version := $(LOCAL_CPP_STD)
 endif
 
-ifneq ($(my_clang),true)
-    # GCC uses an invalid C++14 ABI (emits calls to
-    # __cxa_throw_bad_array_length, which is not a valid C++ RT ABI).
-    # http://b/25022512
-    my_cpp_std_version := $(DEFAULT_GCC_CPP_STD_VERSION)
-endif
-
-ifdef LOCAL_IS_HOST_MODULE
-    ifneq ($(my_clang),true)
-        # The host GCC doesn't support C++14 (and is deprecated, so likely
-        # never will). Build these modules with C++11.
-        my_cpp_std_version := $(DEFAULT_GCC_CPP_STD_VERSION)
-    endif
-endif
-
 my_c_std_conlyflags :=
 my_cpp_std_cppflags :=
 ifneq (,$(my_c_std_version))
@@ -404,15 +398,17 @@
    my_cpp_std_cppflags := -std=$(my_cpp_std_version)
 endif
 
+# Extra cflags for projects under external/ directory
+ifneq ($(filter external/%,$(LOCAL_PATH)),)
+    my_cflags += $(CLANG_EXTERNAL_CFLAGS)
+endif
+
 # arch-specific static libraries go first so that generic ones can depend on them
 my_static_libraries := $(LOCAL_STATIC_LIBRARIES_$($(my_prefix)$(LOCAL_2ND_ARCH_VAR_PREFIX)ARCH)) $(LOCAL_STATIC_LIBRARIES_$(my_32_64_bit_suffix)) $(my_static_libraries)
 my_whole_static_libraries := $(LOCAL_WHOLE_STATIC_LIBRARIES_$($(my_prefix)$(LOCAL_2ND_ARCH_VAR_PREFIX)ARCH)) $(LOCAL_WHOLE_STATIC_LIBRARIES_$(my_32_64_bit_suffix)) $(my_whole_static_libraries)
 my_header_libraries := $(LOCAL_HEADER_LIBRARIES_$($(my_prefix)$(LOCAL_2ND_ARCH_VAR_PREFIX)ARCH)) $(LOCAL_HEADER_LIBRARIES_$(my_32_64_bit_suffix)) $(my_header_libraries)
 
-# soong defined modules already have done through this
-ifneq ($(LOCAL_MODULE_MAKEFILE),$(SOONG_ANDROID_MK))
 include $(BUILD_SYSTEM)/cxx_stl_setup.mk
-endif
 
 # Add static HAL libraries
 ifdef LOCAL_HAL_STATIC_LIBRARIES
@@ -429,22 +425,12 @@
   my_linker := $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)LINKER)
 endif
 
-# Modules from soong do not need this since the dependencies are already handled there.
-ifneq ($(LOCAL_MODULE_MAKEFILE),$(SOONG_ANDROID_MK))
 include $(BUILD_SYSTEM)/config_sanitizers.mk
 
-ifneq ($(LOCAL_NO_LIBCOMPILER_RT),true)
-# Add in libcompiler_rt for all regular device builds
-ifeq (,$(WITHOUT_LIBCOMPILER_RT))
-  my_static_libraries += $(COMPILER_RT_CONFIG_EXTRA_STATIC_LIBRARIES)
-endif
-endif
-
 # Statically link libwinpthread when cross compiling win32.
 ifeq ($($(my_prefix)OS),windows)
   my_static_libraries += libwinpthread
 endif
-endif # this module is not from soong
 
 ifneq ($(filter ../%,$(my_src_files)),)
 my_soong_problems += dotdot_srcs
@@ -512,17 +498,18 @@
     $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)C_SYSTEM_INCLUDES)
 endif
 
-ifeq ($(my_clang),true)
 my_target_global_cflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)CLANG_$(my_prefix)GLOBAL_CFLAGS)
 my_target_global_conlyflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)CLANG_$(my_prefix)GLOBAL_CONLYFLAGS) $(my_c_std_conlyflags)
 my_target_global_cppflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)CLANG_$(my_prefix)GLOBAL_CPPFLAGS) $(my_cpp_std_cppflags)
-my_target_global_ldflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)CLANG_$(my_prefix)GLOBAL_LDFLAGS)
+ifeq ($(my_use_clang_lld),true)
+  my_target_global_ldflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)CLANG_$(my_prefix)GLOBAL_LLDFLAGS)
+  include $(BUILD_SYSTEM)/pack_dyn_relocs_setup.mk
+  ifeq ($(my_pack_module_relocations),false)
+    my_target_global_ldflags += -Wl,--pack-dyn-relocs=none
+  endif
 else
-my_target_global_cflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)GLOBAL_CFLAGS)
-my_target_global_conlyflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)GLOBAL_CONLYFLAGS) $(my_c_std_conlyflags)
-my_target_global_cppflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)GLOBAL_CPPFLAGS) $(my_cpp_std_cppflags)
-my_target_global_ldflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)GLOBAL_LDFLAGS)
-endif # my_clang
+  my_target_global_ldflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)CLANG_$(my_prefix)GLOBAL_LDFLAGS)
+endif # my_use_clang_lld
 
 $(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_GLOBAL_C_INCLUDES := $(my_target_global_c_includes)
 $(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_GLOBAL_C_SYSTEM_INCLUDES := $(my_target_global_c_system_includes)
@@ -538,17 +525,14 @@
 my_host_global_c_system_includes := $(SRC_SYSTEM_HEADERS) \
     $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)C_SYSTEM_INCLUDES)
 
-ifeq ($(my_clang),true)
 my_host_global_cflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)CLANG_$(my_prefix)GLOBAL_CFLAGS)
 my_host_global_conlyflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)CLANG_$(my_prefix)GLOBAL_CONLYFLAGS) $(my_c_std_conlyflags)
 my_host_global_cppflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)CLANG_$(my_prefix)GLOBAL_CPPFLAGS) $(my_cpp_std_cppflags)
-my_host_global_ldflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)CLANG_$(my_prefix)GLOBAL_LDFLAGS)
+ifeq ($(my_use_clang_lld),true)
+  my_host_global_ldflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)CLANG_$(my_prefix)GLOBAL_LLDFLAGS)
 else
-my_host_global_cflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)GLOBAL_CFLAGS)
-my_host_global_conlyflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)GLOBAL_CONLYFLAGS) $(my_c_std_conlyflags)
-my_host_global_cppflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)GLOBAL_CPPFLAGS) $(my_cpp_std_cppflags)
-my_host_global_ldflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)GLOBAL_LDFLAGS)
-endif # my_clang
+  my_host_global_ldflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)CLANG_$(my_prefix)GLOBAL_LDFLAGS)
+endif # my_use_clang_lld
 
 $(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_GLOBAL_C_INCLUDES := $(my_host_global_c_includes)
 $(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_GLOBAL_C_SYSTEM_INCLUDES := $(my_host_global_c_system_includes)
@@ -574,11 +558,7 @@
         my_ldflags += --coverage
     endif
 
-    ifeq ($(my_clang),true)
-        my_coverage_lib := $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)LIBPROFILE_RT)
-    else
-        my_coverage_lib := $(call intermediates-dir-for,STATIC_LIBRARIES,libgcov,$(filter AUX,$(my_kind)),,$(LOCAL_2ND_ARCH_VAR_PREFIX))/libgcov.a
-    endif
+    my_coverage_lib := $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)LIBPROFILE_RT)
 
     $(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_TARGET_COVERAGE_LIB := $(my_coverage_lib)
     $(LOCAL_INTERMEDIATE_TARGETS): $(my_coverage_lib)
@@ -596,12 +576,6 @@
   LOCAL_NO_STATIC_ANALYZER := true
 endif
 
-# Clang does not recognize all gcc flags.
-# Use static analyzer only if clang is used.
-ifneq ($(my_clang),true)
-  LOCAL_NO_STATIC_ANALYZER := true
-endif
-
 ifneq ($(strip $(LOCAL_IS_HOST_MODULE)),)
   my_syntax_arch := host
 else
@@ -609,12 +583,7 @@
 endif
 
 ifeq ($(strip $(my_cc)),)
-  ifeq ($(my_clang),true)
-    my_cc := $(CLANG)
-  else
-    my_cc := $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)CC)
-  endif
-  my_cc := $(my_cc_wrapper) $(my_cc)
+  my_cc := $(my_cc_wrapper) $(CLANG)
 endif
 
 SYNTAX_TOOLS_PREFIX := \
@@ -628,12 +597,7 @@
 $(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_CC := $(my_cc)
 
 ifeq ($(strip $(my_cxx)),)
-  ifeq ($(my_clang),true)
-    my_cxx := $(CLANG_CXX)
-  else
-    my_cxx := $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)CXX)
-  endif
-  my_cxx := $(my_cxx_wrapper) $(my_cxx)
+  my_cxx := $(my_cxx_wrapper) $(CLANG_CXX)
 endif
 
 ifneq ($(LOCAL_NO_STATIC_ANALYZER),true)
@@ -643,7 +607,6 @@
 
 $(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_LINKER := $(my_linker)
 $(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_CXX := $(my_cxx)
-$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_CLANG := $(my_clang)
 
 # TODO: support a mix of standard extensions so that this isn't necessary
 LOCAL_CPP_EXTENSION := $(strip $(LOCAL_CPP_EXTENSION))
@@ -687,10 +650,6 @@
 # actually used (although they are usually empty).
 arm_objects_cflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)$(arm_objects_mode)_CFLAGS)
 normal_objects_cflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)$(normal_objects_mode)_CFLAGS)
-ifeq ($(my_clang),true)
-arm_objects_cflags := $(call convert-to-clang-flags,$(arm_objects_cflags))
-normal_objects_cflags := $(call convert-to-clang-flags,$(normal_objects_cflags))
-endif
 
 else
 arm_objects_mode :=
@@ -795,7 +754,7 @@
 $(RenderScript_file_stamp): PRIVATE_RS_FLAGS := $(renderscript_flags)
 $(RenderScript_file_stamp): PRIVATE_RS_SOURCE_FILES := $(renderscript_sources_fullpath)
 $(RenderScript_file_stamp): PRIVATE_RS_OUTPUT_DIR := $(renderscript_intermediate)
-$(RenderScript_file_stamp): PRIVATE_RS_TARGET_API := $(renderscript_target_api)
+$(RenderScript_file_stamp): PRIVATE_RS_TARGET_API := $(patsubst current,0,$(renderscript_target_api))
 $(RenderScript_file_stamp): PRIVATE_DEP_FILES := $(bc_dep_files)
 $(RenderScript_file_stamp): $(renderscript_sources_fullpath) $(LOCAL_RENDERSCRIPT_CC)
 	$(transform-renderscripts-to-cpp-and-bc)
@@ -838,7 +797,7 @@
 my_proto_source_suffix := .c
 my_proto_c_includes := external/nanopb-c
 my_protoc_flags := --nanopb_out=$(proto_gen_dir) \
-    --plugin=external/nanopb-c/generator/protoc-gen-nanopb
+    --plugin=$(HOST_OUT_EXECUTABLES)/protoc-gen-nanopb
 my_protoc_deps := $(NANOPB_SRCS) $(proto_sources_fullpath:%.proto=%.options)
 else
 my_proto_source_suffix := $(LOCAL_CPP_EXTENSION)
@@ -1304,6 +1263,24 @@
     $(my_static_libraries))
 endif
 
+ifneq ($(LOCAL_USE_VNDK),)
+  my_soong_hwasan_static_libraries := $(SOONG_HWASAN_VENDOR_STATIC_LIBRARIES)
+else
+  my_soong_hwasan_static_libraries = $(SOONG_HWASAN_STATIC_LIBRARIES)
+endif
+
+define use_soong_hwasan_static_libraries
+  $(foreach l,$(1),$(if $(filter $(l),$(my_soong_hwasan_static_libraries)),\
+      $(l).hwasan,$(l)))
+endef
+
+ifneq ($(filter hwaddress,$(my_sanitize)),)
+  my_whole_static_libraries := $(call use_soong_hwasan_static_libraries,\
+    $(my_whole_static_libraries))
+  my_static_libraries := $(call use_soong_hwasan_static_libraries,\
+    $(my_static_libraries))
+endif
+
 ###########################################################
 ## When compiling against the VNDK, use LL-NDK libraries
 ###########################################################
@@ -1314,29 +1291,23 @@
   ## switch all soong libraries over to the /vendor
   ## variant.
   ####################################################
-  ifneq ($(LOCAL_MODULE_MAKEFILE),$(SOONG_ANDROID_MK))
-    # We don't do this renaming for soong-defined modules since they already have correct
-    # names (with .vendor suffix when necessary) in their LOCAL_*_LIBRARIES.
-    my_whole_static_libraries := $(foreach l,$(my_whole_static_libraries),\
-      $(if $(SPLIT_VENDOR.STATIC_LIBRARIES.$(l)),$(l).vendor,$(l)))
-    my_static_libraries := $(foreach l,$(my_static_libraries),\
-      $(if $(SPLIT_VENDOR.STATIC_LIBRARIES.$(l)),$(l).vendor,$(l)))
-    my_shared_libraries := $(foreach l,$(my_shared_libraries),\
-      $(if $(SPLIT_VENDOR.SHARED_LIBRARIES.$(l)),$(l).vendor,$(l)))
-    my_system_shared_libraries := $(foreach l,$(my_system_shared_libraries),\
-      $(if $(SPLIT_VENDOR.SHARED_LIBRARIES.$(l)),$(l).vendor,$(l)))
-    my_header_libraries := $(foreach l,$(my_header_libraries),\
-      $(if $(SPLIT_VENDOR.HEADER_LIBRARIES.$(l)),$(l).vendor,$(l)))
-  endif
+  my_whole_static_libraries := $(foreach l,$(my_whole_static_libraries),\
+    $(if $(SPLIT_VENDOR.STATIC_LIBRARIES.$(l)),$(l).vendor,$(l)))
+  my_static_libraries := $(foreach l,$(my_static_libraries),\
+    $(if $(SPLIT_VENDOR.STATIC_LIBRARIES.$(l)),$(l).vendor,$(l)))
+  my_shared_libraries := $(foreach l,$(my_shared_libraries),\
+    $(if $(SPLIT_VENDOR.SHARED_LIBRARIES.$(l)),$(l).vendor,$(l)))
+  my_system_shared_libraries := $(foreach l,$(my_system_shared_libraries),\
+    $(if $(SPLIT_VENDOR.SHARED_LIBRARIES.$(l)),$(l).vendor,$(l)))
+  my_header_libraries := $(foreach l,$(my_header_libraries),\
+    $(if $(SPLIT_VENDOR.HEADER_LIBRARIES.$(l)),$(l).vendor,$(l)))
 endif
 
 # Platform can use vendor public libraries. If a required shared lib is one of
 # the vendor public libraries, the lib is switched to the stub version of the lib.
 ifeq ($(LOCAL_USE_VNDK),)
-  ifneq ($(LOCAL_MODULE_MAKEFILE),$(SOONG_ANDROID_MK))
-    my_shared_libraries := $(foreach l,$(my_shared_libraries),\
-      $(if $(filter $(l),$(VENDOR_PUBLIC_LIBRARIES)),$(l).vendorpublic,$(l)))
-  endif
+  my_shared_libraries := $(foreach l,$(my_shared_libraries),\
+    $(if $(filter $(l),$(VENDOR_PUBLIC_LIBRARIES)),$(l).vendorpublic,$(l)))
 endif
 
 ##########################################################
@@ -1416,6 +1387,11 @@
         my_warn_types :=
         my_allowed_types := native:vendor native:vndk
     endif
+else ifneq ($(filter $(TARGET_RECOVERY_OUT)/%,$(call get_non_asan_path,$(LOCAL_MODULE_PATH))),)
+my_link_type := native:recovery
+my_warn_types :=
+# TODO(b/113303515) remove native:platform and my_allowed_ndk_types
+my_allowed_types := native:recovery native:platform $(my_allowed_ndk_types)
 else
 my_link_type := native:platform
 my_warn_types := $(my_warn_ndk_types)
@@ -1531,9 +1507,9 @@
 
 ifneq ($(LOCAL_SDK_VERSION),)
 built_shared_libraries := \
-    $(addprefix $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)OUT_INTERMEDIATE_LIBRARIES)/, \
-      $(addsuffix $(so_suffix), \
-        $(my_shared_libraries)))
+    $(foreach lib,$(my_shared_libraries), \
+      $(call intermediates-dir-for, \
+        SHARED_LIBRARIES,$(lib),$(my_kind),,$(LOCAL_2ND_ARCH_VAR_PREFIX),$(my_host_cross))/$(lib)$(so_suffix))
 built_shared_library_deps := $(addsuffix .toc, $(built_shared_libraries))
 
 # Add the NDK libraries to the built module dependency
@@ -1557,9 +1533,9 @@
 
 else
 built_shared_libraries := \
-    $(addprefix $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)OUT_INTERMEDIATE_LIBRARIES)/, \
-      $(addsuffix $(so_suffix), \
-        $(installed_shared_library_module_names)))
+    $(foreach lib,$(installed_shared_library_module_names), \
+      $(call intermediates-dir-for, \
+        SHARED_LIBRARIES,$(lib),$(my_kind),,$(LOCAL_2ND_ARCH_VAR_PREFIX),$(my_host_cross))/$(lib)$(so_suffix))
 built_shared_library_deps := $(addsuffix .toc, $(built_shared_libraries))
 my_system_shared_libraries_fullpath :=
 endif
@@ -1582,10 +1558,18 @@
 # libraries have already been linked into the module at that point.
 # We do, however, care about the NOTICE files for any static
 # libraries that we use. (see notice_files.mk)
-
+#
+# Don't do this in mm, since many of the targets won't exist.
+ifeq ($(ONE_SHOT_MAKEFILE),)
 installed_static_library_notice_file_targets := \
     $(foreach lib,$(my_static_libraries) $(my_whole_static_libraries), \
-      NOTICE-$(if $(LOCAL_IS_HOST_MODULE),HOST,TARGET)-STATIC_LIBRARIES-$(lib))
+      NOTICE-$(if $(LOCAL_IS_HOST_MODULE),HOST$(if $(my_host_cross),_CROSS,),TARGET)-STATIC_LIBRARIES-$(lib))
+else
+installed_static_library_notice_file_targets :=
+endif
+
+$(notice_target): | $(installed_static_library_notice_file_targets)
+$(LOCAL_INSTALLED_MODULE): | $(notice_target)
 
 $(notice_target): | $(installed_static_library_notice_file_targets)
 $(LOCAL_INSTALLED_MODULE): | $(notice_target)
@@ -1599,12 +1583,9 @@
 # Rule-specific variable definitions
 ###########################################################
 
-ifeq ($(my_clang),true)
 my_cflags += $(LOCAL_CLANG_CFLAGS)
 my_conlyflags += $(LOCAL_CLANG_CONLYFLAGS)
 my_cppflags += $(LOCAL_CLANG_CPPFLAGS)
-my_cflags_no_override += $(GLOBAL_CLANG_CFLAGS_NO_OVERRIDE)
-my_cppflags_no_override += $(GLOBAL_CLANG_CPPFLAGS_NO_OVERRIDE)
 my_asflags += $(LOCAL_CLANG_ASFLAGS)
 my_ldflags += $(LOCAL_CLANG_LDFLAGS)
 my_cflags += $(LOCAL_CLANG_CFLAGS_$($(my_prefix)$(LOCAL_2ND_ARCH_VAR_PREFIX)ARCH)) $(LOCAL_CLANG_CFLAGS_$(my_32_64_bit_suffix))
@@ -1616,11 +1597,6 @@
 my_cppflags := $(call convert-to-clang-flags,$(my_cppflags))
 my_asflags := $(call convert-to-clang-flags,$(my_asflags))
 my_ldflags := $(call convert-to-clang-flags,$(my_ldflags))
-else
-# gcc does not handle hidden functions in a manner compatible with LLVM libcxx
-# see b/27908145
-my_cflags += -Wno-attributes
-endif
 
 ifeq ($(my_fdo_build), true)
   my_cflags := $(patsubst -Os,-O2,$(my_cflags))
@@ -1653,26 +1629,23 @@
 endif
 
 # Check if -Werror or -Wno-error is used in C compiler flags.
-# Modules defined in $(SOONG_ANDROID_MK) are checked in soong's cc.go.
-ifneq ($(LOCAL_MODULE_MAKEFILE),$(SOONG_ANDROID_MK))
-  # Header libraries do not need cflags.
-  ifneq (HEADER_LIBRARIES,$(LOCAL_MODULE_CLASS))
-    # Prebuilt modules do not need cflags.
-    ifeq (,$(LOCAL_PREBUILT_MODULE_FILE))
-      my_all_cflags := $(my_cflags) $(my_cppflags) $(my_cflags_no_override)
-      # Issue warning if -Wno-error is used.
-      ifneq (,$(filter -Wno-error,$(my_all_cflags)))
-        $(eval MODULES_USING_WNO_ERROR := $(MODULES_USING_WNO_ERROR) $(LOCAL_MODULE_MAKEFILE):$(LOCAL_MODULE))
-      else
-        # Issue warning if -Werror is not used. Add it.
-        ifeq (,$(filter -Werror,$(my_all_cflags)))
-          # Add -Wall -Werror unless the project is in the WARNING_ALLOWED project list.
-          ifeq (,$(strip $(call find_warning_allowed_projects,$(LOCAL_PATH))))
-            my_cflags := -Wall -Werror $(my_cflags)
-          else
-            $(eval MODULES_ADDED_WALL := $(MODULES_ADDED_WALL) $(LOCAL_MODULE_MAKEFILE):$(LOCAL_MODULE))
-            my_cflags := -Wall $(my_cflags)
-          endif
+# Header libraries do not need cflags.
+ifneq (HEADER_LIBRARIES,$(LOCAL_MODULE_CLASS))
+  # Prebuilt modules do not need cflags.
+  ifeq (,$(LOCAL_PREBUILT_MODULE_FILE))
+    my_all_cflags := $(my_cflags) $(my_cppflags) $(my_cflags_no_override)
+    # Issue warning if -Wno-error is used.
+    ifneq (,$(filter -Wno-error,$(my_all_cflags)))
+      $(eval MODULES_USING_WNO_ERROR := $(MODULES_USING_WNO_ERROR) $(LOCAL_MODULE_MAKEFILE):$(LOCAL_MODULE))
+    else
+      # Issue warning if -Werror is not used. Add it.
+      ifeq (,$(filter -Werror,$(my_all_cflags)))
+        # Add -Wall -Werror unless the project is in the WARNING_ALLOWED project list.
+        ifeq (,$(strip $(call find_warning_allowed_projects,$(LOCAL_PATH))))
+          my_cflags := -Wall -Werror $(my_cflags)
+        else
+          $(eval MODULES_ADDED_WALL := $(MODULES_ADDED_WALL) $(LOCAL_MODULE_MAKEFILE):$(LOCAL_MODULE))
+          my_cflags := -Wall $(my_cflags)
         endif
       endif
     endif
@@ -1694,40 +1667,53 @@
 my_tidy_checks :=
 my_tidy_flags :=
 ifneq (,$(filter 1 true,$(my_tidy_enabled)))
-  ifneq ($(my_clang),true)
-    # Disable clang-tidy if clang is disabled.
-    my_tidy_enabled := false
-  else
-    tidy_only: $(cpp_objects) $(c_objects)
-    # Set up global default checks
-    my_tidy_checks := $(WITH_TIDY_CHECKS)
-    ifeq ($(my_tidy_checks),)
-      my_tidy_checks := $(call default_global_tidy_checks,$(LOCAL_PATH))
-    endif
-    # Append local clang-tidy checks.
-    ifneq ($(LOCAL_TIDY_CHECKS),)
-      my_tidy_checks := $(my_tidy_checks),$(LOCAL_TIDY_CHECKS)
-    endif
-    my_tidy_flags += $(WITH_TIDY_FLAGS) $(LOCAL_TIDY_FLAGS)
-    # If tidy flags are not specified, default to check all header files.
-    ifeq ($(my_tidy_flags),)
-      my_tidy_flags := $(call default_tidy_header_filter,$(LOCAL_PATH))
-    endif
-    # If clang-tidy is not enabled globally, add the -quiet flag.
-    ifeq (,$(filter 1 true,$(WITH_TIDY)))
-      my_tidy_flags += -quiet -extra-arg-before=-fno-caret-diagnostics
-    endif
+  tidy_only: $(cpp_objects) $(c_objects) $(gen_c_objects) $(gen_cpp_objects)
+  # Set up global default checks
+  my_tidy_checks := $(WITH_TIDY_CHECKS)
+  ifeq ($(my_tidy_checks),)
+    my_tidy_checks := $(call default_global_tidy_checks,$(LOCAL_PATH))
+  endif
+  # Append local clang-tidy checks.
+  ifneq ($(LOCAL_TIDY_CHECKS),)
+    my_tidy_checks := $(my_tidy_checks),$(LOCAL_TIDY_CHECKS)
+  endif
+  my_tidy_flags := $(strip $(WITH_TIDY_FLAGS) $(LOCAL_TIDY_FLAGS))
+  # If tidy flags are not specified, default to check all header files.
+  ifeq ($(my_tidy_flags),)
+    my_tidy_flags := $(call default_tidy_header_filter,$(LOCAL_PATH))
+  endif
+  # If clang-tidy is not enabled globally, add the -quiet flag.
+  ifeq (,$(filter 1 true,$(WITH_TIDY)))
+    my_tidy_flags += -quiet -extra-arg-before=-fno-caret-diagnostics
+  endif
 
+  ifneq ($(my_tidy_checks),)
     # We might be using the static analyzer through clang-tidy.
     # https://bugs.llvm.org/show_bug.cgi?id=32914
-    ifneq ($(my_tidy_checks),)
-      my_tidy_flags += -extra-arg-before=-D__clang_analyzer__
-    endif
+    my_tidy_flags += -extra-arg-before=-D__clang_analyzer__
+
+    # A recent change in clang-tidy (r328258) enabled destructor inlining,
+    # which appears to cause a number of false positives. Until that's
+    # resolved, this turns off the effects of r328258.
+    # https://bugs.llvm.org/show_bug.cgi?id=37459
+    my_tidy_flags += -extra-arg-before=-Xclang
+    my_tidy_flags += -extra-arg-before=-analyzer-config
+    my_tidy_flags += -extra-arg-before=-Xclang
+    my_tidy_flags += -extra-arg-before=c++-temp-dtor-inlining=false
   endif
 endif
 
 my_tidy_checks := $(subst $(space),,$(my_tidy_checks))
 
+# Add dependency of clang-tidy and clang-tidy.sh
+ifneq ($(my_tidy_checks),)
+  my_clang_tidy_programs := $(PATH_TO_CLANG_TIDY) $(PATH_TO_CLANG_TIDY_SHELL)
+  $(cpp_objects): $(intermediates)/%.o: $(my_clang_tidy_programs)
+  $(c_objects): $(intermediates)/%.o: $(my_clang_tidy_programs)
+  $(gen_cpp_objects): $(intermediates)/%.o: $(my_clang_tidy_programs)
+  $(gen_c_objects): $(intermediates)/%.o: $(my_clang_tidy_programs)
+endif
+
 # Move -l* entries from ldflags to ldlibs, and everything else to ldflags
 my_ldlib_flags := $(my_ldflags) $(my_ldlibs)
 my_ldlibs := $(filter -l%,$(my_ldlib_flags))
@@ -1791,12 +1777,6 @@
 ###########################################################
 export_includes := $(intermediates)/export_includes
 export_cflags := $(foreach d,$(my_export_c_include_dirs),-I $(d))
-# Soong exports cflags instead of include dirs, so that -isystem can be included.
-ifeq ($(LOCAL_MODULE_MAKEFILE),$(SOONG_ANDROID_MK))
-export_cflags += $(LOCAL_EXPORT_CFLAGS)
-else ifdef LOCAL_EXPORT_CFLAGS
-$(call pretty-error,LOCAL_EXPORT_CFLAGS can only be used by Soong, use LOCAL_EXPORT_C_INCLUDE_DIRS instead)
-endif
 $(export_includes): PRIVATE_EXPORT_CFLAGS := $(export_cflags)
 # Headers exported by whole static libraries are also exported by this library.
 export_include_deps := $(strip \
@@ -1841,7 +1821,6 @@
 # Make sure export_includes gets generated when you are running mm/mmm
 $(LOCAL_BUILT_MODULE) : | $(export_includes)
 
-ifneq ($(LOCAL_MODULE_MAKEFILE),$(SOONG_ANDROID_MK))
 ifneq (,$(filter-out $(LOCAL_PATH)/%,$(my_export_c_include_dirs)))
 my_soong_problems += non_local__export_c_include_dirs
 endif
@@ -1857,7 +1836,6 @@
         $(my_system_shared_libraries))
 SOONG_CONV.$(LOCAL_MODULE).TYPE := native
 SOONG_CONV := $(SOONG_CONV) $(LOCAL_MODULE)
-endif
 
 ###########################################################
 # Coverage packaging.
diff --git a/core/build-system.html b/core/build-system.html
index 3d86e24..3a11a47 100644
--- a/core/build-system.html
+++ b/core/build-system.html
@@ -147,12 +147,6 @@
 .c, .cpp, .h, .java, java libraries, etc., should all work without intervention
 in the Android.mk file.</p>
 
-<h3>Hiding command lines</h3>
-<p>The default of the build system will be to hide the command lines being
-executed for make steps.  It will be possible to override this by specifying
-the showcommands pseudo-target, and possibly by setting an environment
-variable.</p>
-
 <h3>Wildcard source files</h3>
 <p>Wildcarding source file will be discouraged.  It may be useful in some
 scenarios.  The default <code>$(wildcard *)</code> will not work due to the
@@ -326,19 +320,6 @@
 directory inside the current combo directory.  This is especially useful on the
 simulator and emulator, where the persistent data remains present between 
 builds.</li>
-<li><b>showcommands</b> - <code>showcommands</code> is a modifier target
-which causes the build system to show the actual command lines for the build
-steps, instead of the brief descriptions.  Most people don't like seeing the
-actual commands, because they're quite long and hard to read, but if you need
-to for debugging purposes, you can add <code>showcommands</code> to the list
-of targets you build.  For example <code>make showcommands</code> will build
-the default android configuration, and <code>make runtime showcommands</code>
-will build just the runtime, and targets that it depends on, while displaying
-the full command lines.  Please note that there are a couple places where the
-commands aren't shown here.  These are considered bugs, and should be fixed,
-but they're often hard to track down.  Please let
-<a href="mailto:android-build-team">android-build-team</a> know if you find
-any.</li>
 <li><b>LOCAL_MODULE</b> - Anything you specify as a <code>LOCAL_MODULE</code>
 in an Android.mk is made into a pseudotarget.  For example, <code>make
 runtime</code> might be shorthand for <code>make
diff --git a/core/build_id.mk b/core/build_id.mk
index 67c2a1f..bac2f48 100644
--- a/core/build_id.mk
+++ b/core/build_id.mk
@@ -18,4 +18,4 @@
 # (like "CRB01").  It must be a single word, and is
 # capitalized by convention.
 
-export BUILD_ID=PPRL.181205.001
+BUILD_ID=PI
diff --git a/core/build_rro_package.mk b/core/build_rro_package.mk
index ffefb9c..0b4a0c4 100644
--- a/core/build_rro_package.mk
+++ b/core/build_rro_package.mk
@@ -15,11 +15,23 @@
   $(error runtime resource overlay package should not contain sources)
 endif
 
-ifeq ($(LOCAL_RRO_THEME),)
-  LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR)/overlay
+partition :=
+ifeq ($(LOCAL_ODM_MODULE),true)
+  partition := $(TARGET_OUT_ODM)
+else ifeq ($(LOCAL_PRODUCT_MODULE),true)
+  partition := $(TARGET_OUT_PRODUCT)
+else ifeq ($(LOCAL_PRODUCT_SERVICES_MODULE),true)
+  partition := $(TARGET_OUT_PRODUCT_SERVICES)
 else
-  LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR)/overlay/$(LOCAL_RRO_THEME)
+  partition := $(TARGET_OUT_VENDOR)
 endif
 
-include $(BUILD_SYSTEM)/package.mk
+ifeq ($(LOCAL_RRO_THEME),)
+  LOCAL_MODULE_PATH := $(partition)/overlay
+else
+  LOCAL_MODULE_PATH := $(partition)/overlay/$(LOCAL_RRO_THEME)
+endif
 
+partition :=
+
+include $(BUILD_SYSTEM)/package.mk
diff --git a/core/ccache.mk b/core/ccache.mk
index d67bce6..d10aceb 100644
--- a/core/ccache.mk
+++ b/core/ccache.mk
@@ -14,39 +14,48 @@
 # limitations under the License.
 #
 
+# We no longer provide a ccache prebuilt.
+#
+# Ours was old, and had a number of issues that triggered non-reproducible
+# results and other failures. Newer ccache versions may fix some of those
+# issues, but at the large scale of our build servers, we weren't seeing
+# significant performance gains from using ccache -- you end up needing very
+# good locality and/or very large caches if you're building many different
+# configurations.
+#
+# Local no-change full rebuilds were showing better results, but why not just
+# use incremental builds at that point?
+#
+# So if you still want to use ccache, continue setting USE_CCACHE, but also set
+# the CCACHE_EXEC environment variable to the path to your ccache executable.
+ifneq ($(CCACHE_EXEC),)
 ifneq ($(filter-out false,$(USE_CCACHE)),)
   # The default check uses size and modification time, causing false misses
   # since the mtime depends when the repo was checked out
-  export CCACHE_COMPILERCHECK ?= content
+  CCACHE_COMPILERCHECK ?= content
 
   # See man page, optimizations to get more cache hits
   # implies that __DATE__ and __TIME__ are not critical for functionality.
   # Ignore include file modification time since it will depend on when
   # the repo was checked out
-  export CCACHE_SLOPPINESS := time_macros,include_file_mtime,file_macro
+  CCACHE_SLOPPINESS := time_macros,include_file_mtime,file_macro
 
   # Turn all preprocessor absolute paths into relative paths.
   # Fixes absolute paths in preprocessed source due to use of -g.
   # We don't really use system headers much so the rootdir is
   # fine; ensures these paths are relative for all Android trees
   # on a workstation.
-  export CCACHE_BASEDIR := /
+  CCACHE_BASEDIR := /
 
   # Workaround for ccache with clang.
   # See http://petereisentraut.blogspot.com/2011/09/ccache-and-clang-part-2.html
-  export CCACHE_CPP2 := true
+  CCACHE_CPP2 := true
 
-  CCACHE_HOST_TAG := $(HOST_PREBUILT_TAG)
-  ccache := prebuilts/misc/$(CCACHE_HOST_TAG)/ccache/ccache
-  # Check that the executable is here.
-  ccache := $(strip $(wildcard $(ccache)))
-  ifdef ccache
-    ifndef CC_WRAPPER
-      CC_WRAPPER := $(ccache)
-    endif
-    ifndef CXX_WRAPPER
-      CXX_WRAPPER := $(ccache)
-    endif
-    ccache =
+  ifndef CC_WRAPPER
+    CC_WRAPPER := $(CCACHE_EXEC)
   endif
+  ifndef CXX_WRAPPER
+    CXX_WRAPPER := $(CCACHE_EXEC)
+  endif
+endif
 endif
diff --git a/core/clang/HOST_CROSS_x86.mk b/core/clang/HOST_CROSS_x86.mk
index ffd7811..7581353 100644
--- a/core/clang/HOST_CROSS_x86.mk
+++ b/core/clang/HOST_CROSS_x86.mk
@@ -1 +1,2 @@
 $(clang_2nd_arch_prefix)HOST_CROSS_LIBPROFILE_RT := $(LLVM_RTLIB_PATH)/libclang_rt.profile-i386.a
+$(clang_2nd_arch_prefix)HOST_CROSS_LIBCRT_BUILTINS := $(LLVM_RTLIB_PATH)/libclang_rt.bulitins-i386.a
diff --git a/core/clang/HOST_CROSS_x86_64.mk b/core/clang/HOST_CROSS_x86_64.mk
index f921a1c..9a971c7 100644
--- a/core/clang/HOST_CROSS_x86_64.mk
+++ b/core/clang/HOST_CROSS_x86_64.mk
@@ -1 +1,2 @@
 $(clang_2nd_arch_prefix)HOST_CROSS_LIBPROFILE_RT := $(LLVM_RTLIB_PATH)/libclang_rt.profile-x86_64.a
+$(clang_2nd_arch_prefix)HOST_CROSS_LIBCRT_BUILTINS := $(LLVM_RTLIB_PATH)/libclang_rt.builtins-x86_64.a
diff --git a/core/clang/HOST_x86.mk b/core/clang/HOST_x86.mk
index 2803517..2e0865b 100644
--- a/core/clang/HOST_x86.mk
+++ b/core/clang/HOST_x86.mk
@@ -1 +1,2 @@
 $(clang_2nd_arch_prefix)HOST_LIBPROFILE_RT := $(LLVM_RTLIB_PATH)/libclang_rt.profile-i386.a
+$(clang_2nd_arch_prefix)HOST_LIBCRT_BUILTINS := $(LLVM_RTLIB_PATH)/libclang_rt.builtins-i386.a
diff --git a/core/clang/HOST_x86_64.mk b/core/clang/HOST_x86_64.mk
index 4fdffd8..3fd0541 100644
--- a/core/clang/HOST_x86_64.mk
+++ b/core/clang/HOST_x86_64.mk
@@ -1 +1,2 @@
 HOST_LIBPROFILE_RT := $(LLVM_RTLIB_PATH)/libclang_rt.profile-x86_64.a
+HOST_LIBCRT_BUILTINS := $(LLVM_RTLIB_PATH)/libclang_rt.builtins-x86_64.a
diff --git a/core/clang/TARGET_arm.mk b/core/clang/TARGET_arm.mk
index 9c1a836..6140d7c 100644
--- a/core/clang/TARGET_arm.mk
+++ b/core/clang/TARGET_arm.mk
@@ -3,6 +3,7 @@
 $(clang_2nd_arch_prefix)RS_COMPAT_TRIPLE := armv7-none-linux-gnueabi
 
 $(clang_2nd_arch_prefix)TARGET_LIBPROFILE_RT := $(LLVM_RTLIB_PATH)/libclang_rt.profile-arm-android.a
+$(clang_2nd_arch_prefix)TARGET_LIBCRT_BUILTINS := $(LLVM_RTLIB_PATH)/libclang_rt.builtins-arm-android.a
 
 # Address sanitizer clang config
 $(clang_2nd_arch_prefix)ADDRESS_SANITIZER_LINKER := /system/bin/linker_asan
diff --git a/core/clang/TARGET_arm64.mk b/core/clang/TARGET_arm64.mk
index 9a67b6b..9fe5530 100644
--- a/core/clang/TARGET_arm64.mk
+++ b/core/clang/TARGET_arm64.mk
@@ -3,6 +3,7 @@
 RS_COMPAT_TRIPLE := aarch64-linux-android
 
 TARGET_LIBPROFILE_RT := $(LLVM_RTLIB_PATH)/libclang_rt.profile-aarch64-android.a
+TARGET_LIBCRT_BUILTINS := $(LLVM_RTLIB_PATH)/libclang_rt.builtins-aarch64-android.a
 
 # Address sanitizer clang config
 ADDRESS_SANITIZER_LINKER := /system/bin/linker_asan64
diff --git a/core/clang/TARGET_x86.mk b/core/clang/TARGET_x86.mk
index 1b9c78c..5e2d57e 100644
--- a/core/clang/TARGET_x86.mk
+++ b/core/clang/TARGET_x86.mk
@@ -3,6 +3,7 @@
 $(clang_2nd_arch_prefix)RS_COMPAT_TRIPLE := i686-linux-android
 
 $(clang_2nd_arch_prefix)TARGET_LIBPROFILE_RT := $(LLVM_RTLIB_PATH)/libclang_rt.profile-i686-android.a
+$(clang_2nd_arch_prefix)TARGET_LIBCRT_BUILTINS := $(LLVM_RTLIB_PATH)/libclang_rt.builtins-i686-android.a
 
 # Address sanitizer clang config
 $(clang_2nd_arch_prefix)ADDRESS_SANITIZER_LINKER := /system/bin/linker_asan
diff --git a/core/clang/TARGET_x86_64.mk b/core/clang/TARGET_x86_64.mk
index 0d3ee3f..86b3798 100644
--- a/core/clang/TARGET_x86_64.mk
+++ b/core/clang/TARGET_x86_64.mk
@@ -3,3 +3,7 @@
 RS_COMPAT_TRIPLE := x86_64-linux-android
 
 TARGET_LIBPROFILE_RT := $(LLVM_RTLIB_PATH)/libclang_rt.profile-x86_64-android.a
+TARGET_LIBCRT_BUILTINS := $(LLVM_RTLIB_PATH)/libclang_rt.builtins-x86_64-android.a
+
+# Address sanitizer clang config
+ADDRESS_SANITIZER_LINKER := /system/bin/linker_asan64
diff --git a/core/clang/config.mk b/core/clang/config.mk
index 408f688..ca3a1fa 100644
--- a/core/clang/config.mk
+++ b/core/clang/config.mk
@@ -1,9 +1,6 @@
 ## Clang configurations.
 
-LLVM_RTLIB_PATH := $(LLVM_PREBUILTS_PATH)/../lib64/clang/$(LLVM_RELEASE_VERSION)/lib/linux/
-
-CLANG_TBLGEN := $(BUILD_OUT_EXECUTABLES)/clang-tblgen$(BUILD_EXECUTABLE_SUFFIX)
-LLVM_TBLGEN := $(BUILD_OUT_EXECUTABLES)/llvm-tblgen$(BUILD_EXECUTABLE_SUFFIX)
+LLVM_RTLIB_PATH := $(LLVM_PREBUILTS_BASE)/linux-x86/$(LLVM_PREBUILTS_VERSION)/lib64/clang/$(LLVM_RELEASE_VERSION)/lib/linux/
 
 define convert-to-clang-flags
 $(strip $(filter-out $(CLANG_CONFIG_UNKNOWN_CFLAGS),$(1)))
@@ -64,32 +61,4 @@
 include $(BUILD_SYSTEM)/clang/TARGET_$(TARGET_2ND_ARCH).mk
 endif
 
-# This allows us to use the superset of functionality that compiler-rt
-# provides to Clang (for supporting features like -ftrapv).
-COMPILER_RT_CONFIG_EXTRA_STATIC_LIBRARIES := libcompiler_rt-extras
-
-# A list of projects that are allowed to set LOCAL_CLANG to false.
-# INTERNAL_LOCAL_CLANG_EXCEPTION_PROJECTS is defined later in other config.mk.
-LOCAL_CLANG_EXCEPTION_PROJECTS = \
-  bionic/tests/ \
-  device/google/contexthub/ \
-  device/huawei/angler/ \
-  device/lge/bullhead/ \
-  external/gentoo/integration/ \
-  hardware/qcom/ \
-  test/vts/hals/camera/bullhead/ \
-  test/vts/hals/etc/libqdutils/ \
-  vendor/huawei/angler/ \
-  vendor/lge/bullhead/ \
-  $(INTERNAL_LOCAL_CLANG_EXCEPTION_PROJECTS)
-
-# Find $1 in the exception project list.
-define find_in_local_clang_exception_projects
-$(subst $(space),, \
-  $(foreach project,$(LOCAL_CLANG_EXCEPTION_PROJECTS), \
-    $(if $(filter $(project)%,$(1)),$(project)) \
-  ) \
-)
-endef
-
 include $(BUILD_SYSTEM)/clang/tidy.mk
diff --git a/core/clear_vars.mk b/core/clear_vars.mk
index bd86cfb..0417e13 100644
--- a/core/clear_vars.mk
+++ b/core/clear_vars.mk
@@ -3,6 +3,7 @@
 ###########################################################
 
 # '',true
+LOCAL_2ND_ARCH_VAR_PREFIX:=
 LOCAL_32_BIT_ONLY:=
 LOCAL_AAPT2_ONLY:=
 LOCAL_AAPT_FLAGS:=
@@ -42,7 +43,6 @@
 LOCAL_CONLYFLAGS:=
 LOCAL_COPY_HEADERS:=
 LOCAL_COPY_HEADERS_TO:=
-LOCAL_COPY_TO_INTERMEDIATE_LIBRARIES:=
 LOCAL_CPP_EXTENSION:=
 LOCAL_CPPFLAGS:=
 LOCAL_CPP_STD:=
@@ -63,22 +63,23 @@
 LOCAL_DONT_CHECK_MODULE:=
 # Don't delete the META_INF dir when merging static Java libraries.
 LOCAL_DONT_DELETE_JAR_META_INF:=
+LOCAL_DONT_MERGE_MANIFESTS:=
 LOCAL_DPI_FILE_STEM:=
 LOCAL_DPI_VARIANTS:=
+LOCAL_DROIDDOC_ANNOTATIONS_ZIP :=
+LOCAL_DROIDDOC_API_VERSIONS_XML :=
 LOCAL_DROIDDOC_ASSET_DIR:=
 LOCAL_DROIDDOC_CUSTOM_ASSET_DIR:=
 LOCAL_DROIDDOC_CUSTOM_TEMPLATE_DIR:=
+LOCAL_DROIDDOC_DOC_ZIP :=
+LOCAL_DROIDDOC_JDIFF_DOC_ZIP :=
 LOCAL_DROIDDOC_HTML_DIR:=
 LOCAL_DROIDDOC_OPTIONS:=
 LOCAL_DROIDDOC_SOURCE_PATH:=
 LOCAL_DROIDDOC_STUB_OUT_DIR:=
+LOCAL_DROIDDOC_STUBS_SRCJAR :=
 LOCAL_DROIDDOC_TEMPLATE_DIR:=
 LOCAL_DROIDDOC_USE_STANDARD_DOCLET:=
-LOCAL_DROIDDOC_USE_METALAVA:=
-LOCAL_DROIDDOC_METALAVA_PREVIOUS_API:=
-LOCAL_DROIDDOC_METALAVA_ANNOTATIONS_ENABLED:=
-LOCAL_DROIDDOC_METALAVA_MERGE_ANNOTATIONS_DIR:=
-LOCAL_DROIDDOC_METALAVA_DOCS_STUB_OUT_DIR:=
 LOCAL_DX_FLAGS:=
 LOCAL_EMMA_COVERAGE_FILTER:=
 LOCAL_EMMA_INSTRUMENT:=
@@ -90,6 +91,7 @@
 LOCAL_EXPORT_HEADER_LIBRARY_HEADERS:=
 LOCAL_EXPORT_PACKAGE_RESOURCES:=
 LOCAL_EXPORT_PROGUARD_FLAG_FILES:=
+LOCAL_EXPORT_SDK_LIBRARIES:=
 LOCAL_EXPORT_SHARED_LIBRARY_HEADERS:=
 LOCAL_EXPORT_STATIC_LIBRARY_HEADERS:=
 LOCAL_EXTRACT_APK:=
@@ -97,10 +99,11 @@
 LOCAL_FDO_SUPPORT:=
 LOCAL_FINDBUGS_FLAGS:=
 LOCAL_FORCE_STATIC_EXECUTABLE:=
-LOCAL_FULL_LIBS_MANIFEST_FILES:=
-LOCAL_FULL_MANIFEST_FILE:=
 LOCAL_FULL_CLASSES_JACOCO_JAR:=
 LOCAL_FULL_CLASSES_PRE_JACOCO_JAR:=
+LOCAL_FULL_LIBS_MANIFEST_FILES:=
+LOCAL_FULL_MANIFEST_FILE:=
+LOCAL_FULL_TEST_CONFIG:=
 LOCAL_FUZZ_ENGINE:=
 LOCAL_GCNO_FILES:=
 LOCAL_GENERATED_SOURCES:=
@@ -109,6 +112,7 @@
 LOCAL_GTEST:=true
 LOCAL_HAL_STATIC_LIBRARIES:=
 LOCAL_HEADER_LIBRARIES:=
+LOCAL_HOST_PREFIX:=
 LOCAL_HOST_REQUIRED_MODULES:=
 LOCAL_INIT_RC:=
 LOCAL_INSTALLED_MODULE:=
@@ -174,13 +178,14 @@
 LOCAL_MODULE_UNSUPPORTED_TARGET_ARCH:=
 LOCAL_MODULE_UNSUPPORTED_TARGET_ARCH_WARN:=
 LOCAL_MULTILIB:=
+LOCAL_NATIVE_BENCHMARK:=
 LOCAL_NDK_STL_VARIANT:=
 LOCAL_NDK_VERSION:=current
 LOCAL_NO_CRT:=
 LOCAL_NO_DEFAULT_COMPILER_FLAGS:=
 LOCAL_NO_FPIE :=
-LOCAL_NO_LIBCOMPILER_RT:=
 LOCAL_NO_LIBGCC:=
+LOCAL_NO_LIBCRT_BUILTINS:=
 LOCAL_NO_NOTICE_FILE:=
 LOCAL_NO_PIC:=
 LOCAL_NOSANITIZE:=
@@ -208,10 +213,13 @@
 LOCAL_PREBUILT_OBJ_FILES:=
 LOCAL_PREBUILT_STATIC_JAVA_LIBRARIES:=
 LOCAL_PREBUILT_STRIP_COMMENTS:=
+LOCAL_PREFER_INTEGRITY:=
+LOCAL_PRESUBMIT_DISABLED:=
 LOCAL_PRIVATE_PLATFORM_APIS:=
 LOCAL_PRIVILEGED_MODULE:=
 # '',full,custom,disabled,obfuscation,optimization
 LOCAL_PRODUCT_MODULE:=
+LOCAL_PRODUCT_SERVICES_MODULE:=
 LOCAL_PROGUARD_ENABLED:=
 LOCAL_PROGUARD_FLAG_FILES:=
 LOCAL_PROGUARD_FLAGS:=
@@ -241,21 +249,25 @@
 LOCAL_SANITIZE_DIAG:=
 LOCAL_SANITIZE_RECOVER:=
 LOCAL_SANITIZE_BLACKLIST :=
+LOCAL_SDK_LIBRARIES :=
 LOCAL_SDK_RES_VERSION:=
 LOCAL_SDK_VERSION:=
 LOCAL_SHARED_ANDROID_LIBRARIES:=
 LOCAL_SHARED_LIBRARIES:=
+LOCAL_SOONG_AAR :=
+LOCAL_SOONG_BUNDLE :=
 LOCAL_SOONG_CLASSES_JAR :=
 LOCAL_SOONG_DEX_JAR :=
 LOCAL_SOONG_EXPORT_PROGUARD_FLAGS :=
 LOCAL_SOONG_HEADER_JAR :=
 LOCAL_SOONG_JACOCO_REPORT_CLASSES_JAR :=
+LOCAL_SOONG_LINK_TYPE :=
 LOCAL_SOONG_PROGUARD_DICT :=
 LOCAL_SOONG_RESOURCE_EXPORT_PACKAGE :=
 LOCAL_SOONG_RRO_DIRS :=
 LOCAL_SOONG_STATIC_LIBRARY_EXTRA_PACKAGES :=
-LOCAL_DROIDDOC_STUBS_JAR :=
-LOCAL_DROIDDOC_DOC_ZIP :=
+LOCAL_SOONG_TOC :=
+LOCAL_SOONG_UNSTRIPPED_BINARY :=
 # '',true
 LOCAL_SOURCE_FILES_ALL_GENERATED:=
 LOCAL_SRC_FILES:=
@@ -265,27 +277,34 @@
 LOCAL_STATIC_JAVA_AAR_LIBRARIES:=
 LOCAL_STATIC_JAVA_LIBRARIES:=
 LOCAL_STATIC_LIBRARIES:=
+LOCAL_STRIP_DEX:=
 LOCAL_STRIP_MODULE:=
 LOCAL_SYSTEM_SHARED_LIBRARIES:=none
 LOCAL_TARGET_REQUIRED_MODULES:=
+LOCAL_TEST_CONFIG:=
 LOCAL_TEST_CONFIG_OPTIONS:=
 LOCAL_TEST_DATA:=
 LOCAL_TEST_MODULE_TO_PROGUARD_WITH:=
 LOCAL_TIDY:=
 LOCAL_TIDY_CHECKS:=
 LOCAL_TIDY_FLAGS:=
+LOCAL_UNCOMPRESS_DEX:=
 LOCAL_UNINSTALLABLE_MODULE:=
 LOCAL_UNSTRIPPED_PATH:=
 LOCAL_USE_AAPT2:=$(USE_AAPT2)
+LOCAL_USE_CLANG_LLD:=
 LOCAL_USE_VNDK:=
 LOCAL_USES_LIBRARIES:=
 LOCAL_VENDOR_MODULE:=
+LOCAL_VINTF_FRAGMENTS:=
 LOCAL_VTSC_FLAGS:=
 LOCAL_VTS_INCLUDES:=
 LOCAL_VTS_MODE:=
 LOCAL_WARNINGS_ENABLE:=
 LOCAL_WHOLE_STATIC_LIBRARIES:=
+LOCAL_XOM:=
 LOCAL_YACCFLAGS:=
+# TODO: deprecate, it does nothing
 OVERRIDE_BUILT_MODULE_PATH:=
 
 # arch specific variables
@@ -305,6 +324,7 @@
 LOCAL_PREBUILT_JNI_LIBS_$(TARGET_ARCH):=
 LOCAL_REQUIRED_MODULES_$(TARGET_ARCH):=
 LOCAL_SHARED_LIBRARIES_$(TARGET_ARCH):=
+LOCAL_SOONG_JNI_LIBS_$(TARGET_ARCH):=
 LOCAL_SRC_FILES_EXCLUDE_$(TARGET_ARCH):=
 LOCAL_SRC_FILES_$(TARGET_ARCH):=
 LOCAL_STATIC_LIBRARIES_$(TARGET_ARCH):=
@@ -327,6 +347,7 @@
 LOCAL_PREBUILT_JNI_LIBS_$(TARGET_2ND_ARCH):=
 LOCAL_REQUIRED_MODULES_$(TARGET_2ND_ARCH):=
 LOCAL_SHARED_LIBRARIES_$(TARGET_2ND_ARCH):=
+LOCAL_SOONG_JNI_LIBS_$(TARGET_2ND_ARCH):=
 LOCAL_SRC_FILES_EXCLUDE_$(TARGET_2ND_ARCH):=
 LOCAL_SRC_FILES_$(TARGET_2ND_ARCH):=
 LOCAL_STATIC_LIBRARIES_$(TARGET_2ND_ARCH):=
@@ -472,6 +493,8 @@
 LOCAL_CUSTOM_BUILD_STEP_OUTPUT:=
 LOCAL_IS_AUX_MODULE :=
 
+full_android_manifest :=
+
 # Trim MAKEFILE_LIST so that $(call my-dir) doesn't need to
 # iterate over thousands of entries every time.
 # Leave the current makefile to make sure we don't break anything
diff --git a/core/combo/HOST_darwin-x86.mk b/core/combo/HOST_darwin-x86.mk
deleted file mode 100644
index 9a55cb5..0000000
--- a/core/combo/HOST_darwin-x86.mk
+++ /dev/null
@@ -1,69 +0,0 @@
-#
-# Copyright (C) 2006 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-# Configuration for Darwin (Mac OS X) on x86.
-# Included by combo/select.mk
-
-define $(combo_var_prefix)transform-shared-lib-to-toc
-$(call _gen_toc_command_for_macho,$(1),$(2))
-endef
-
-$(combo_2nd_arch_prefix)HOST_GLOBAL_ARFLAGS := cqs
-
-############################################################
-## Macros after this line are shared by the 64-bit config.
-
-HOST_CUSTOM_LD_COMMAND := true
-
-define transform-host-o-to-shared-lib-inner
-$(hide) $(PRIVATE_CXX) \
-        -dynamiclib -single_module -read_only_relocs suppress \
-        $(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \
-            $(PRIVATE_HOST_GLOBAL_LDFLAGS) \
-        ) \
-        $(PRIVATE_ALL_OBJECTS) \
-        $(addprefix -force_load , $(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES)) \
-        $(PRIVATE_ALL_SHARED_LIBRARIES) \
-        $(PRIVATE_ALL_STATIC_LIBRARIES) \
-        $(PRIVATE_LDLIBS) \
-        -o $@ \
-        -install_name @rpath/$(notdir $@) \
-        -Wl,-rpath,@loader_path/../$(notdir $($(PRIVATE_2ND_ARCH_VAR_PREFIX)HOST_OUT_SHARED_LIBRARIES)) \
-        -Wl,-rpath,@loader_path/$(notdir $($(PRIVATE_2ND_ARCH_VAR_PREFIX)HOST_OUT_SHARED_LIBRARIES)) \
-        $(PRIVATE_LDFLAGS)
-endef
-
-define transform-host-o-to-executable-inner
-$(hide) $(PRIVATE_CXX) \
-        $(foreach path,$(PRIVATE_RPATHS), \
-          -Wl,-rpath,@loader_path/$(path)) \
-        -o $@ \
-        -Wl,-headerpad_max_install_names \
-        $(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \
-           $(PRIVATE_HOST_GLOBAL_LDFLAGS) \
-        ) \
-        $(PRIVATE_ALL_SHARED_LIBRARIES) \
-        $(PRIVATE_ALL_OBJECTS) \
-        $(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES) \
-        $(PRIVATE_ALL_STATIC_LIBRARIES) \
-        $(PRIVATE_LDFLAGS) \
-        $(PRIVATE_LDLIBS)
-endef
-
-# $(1): The file to check
-define get-file-size
-stat -f "%z" $(1)
-endef
diff --git a/core/combo/HOST_darwin-x86_64.mk b/core/combo/HOST_darwin-x86_64.mk
index 6cca167..07f8d9f 100644
--- a/core/combo/HOST_darwin-x86_64.mk
+++ b/core/combo/HOST_darwin-x86_64.mk
@@ -23,7 +23,44 @@
 
 HOST_GLOBAL_ARFLAGS := cqs
 
-# We Reuse the following functions with the same name from HOST_darwin-x86.mk:
-# transform-host-o-to-shared-lib-inner
-# transform-host-o-to-executable-inner
-# get-file-size
+HOST_CUSTOM_LD_COMMAND := true
+
+define transform-host-o-to-shared-lib-inner
+$(hide) $(PRIVATE_CXX) \
+        -dynamiclib -single_module -read_only_relocs suppress \
+        $(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \
+            $(PRIVATE_HOST_GLOBAL_LDFLAGS) \
+        ) \
+        $(PRIVATE_ALL_OBJECTS) \
+        $(addprefix -force_load , $(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES)) \
+        $(PRIVATE_ALL_SHARED_LIBRARIES) \
+        $(PRIVATE_ALL_STATIC_LIBRARIES) \
+        $(PRIVATE_LDLIBS) \
+        -o $@ \
+        -install_name @rpath/$(notdir $@) \
+        -Wl,-rpath,@loader_path/../$(notdir $($(PRIVATE_2ND_ARCH_VAR_PREFIX)HOST_OUT_SHARED_LIBRARIES)) \
+        -Wl,-rpath,@loader_path/$(notdir $($(PRIVATE_2ND_ARCH_VAR_PREFIX)HOST_OUT_SHARED_LIBRARIES)) \
+        $(PRIVATE_LDFLAGS)
+endef
+
+define transform-host-o-to-executable-inner
+$(hide) $(PRIVATE_CXX) \
+        $(foreach path,$(PRIVATE_RPATHS), \
+          -Wl,-rpath,@loader_path/$(path)) \
+        -o $@ \
+        -Wl,-headerpad_max_install_names \
+        $(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \
+           $(PRIVATE_HOST_GLOBAL_LDFLAGS) \
+        ) \
+        $(PRIVATE_ALL_SHARED_LIBRARIES) \
+        $(PRIVATE_ALL_OBJECTS) \
+        $(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES) \
+        $(PRIVATE_ALL_STATIC_LIBRARIES) \
+        $(PRIVATE_LDFLAGS) \
+        $(PRIVATE_LDLIBS)
+endef
+
+# $(1): The file to check
+define get-file-size
+stat -f "%z" $(1)
+endef
diff --git a/core/combo/TARGET_linux-arm.mk b/core/combo/TARGET_linux-arm.mk
index 3ce64f9..c31906a 100644
--- a/core/combo/TARGET_linux-arm.mk
+++ b/core/combo/TARGET_linux-arm.mk
@@ -33,12 +33,24 @@
 TARGET_$(combo_2nd_arch_prefix)CPU_VARIANT := generic
 endif
 
-KNOWN_ARMv8_CORES := cortex-a53 cortex-a53.a57 cortex-a55 cortex-a73 cortex-a75
-KNOWN_ARMv8_CORES += kryo denver64 exynos-m1 exynos-m2
+KNOWN_ARMv8_CORES := cortex-a53 cortex-a53.a57 cortex-a55 cortex-a73 cortex-a75 cortex-a76
+KNOWN_ARMv8_CORES += kryo exynos-m1 exynos-m2
 
+KNOWN_ARMv82a_CORES := cortex-a55 cortex-a75
+
+# Check for cores that implement armv8-2a ISAs.
+ifneq (,$(filter $(TARGET_$(combo_2nd_arch_prefix)CPU_VARIANT), $(KNOWN_ARMv82a_CORES)))
+  ifneq ($(TARGET_$(combo_2nd_arch_prefix)ARCH_VARIANT),armv8-2a)
+    $(warning $(TARGET_$(combo_2nd_arch_prefix)CPU_VARIANT) is armv8-2a.)
+    ifneq (,$(TARGET_$(combo_2nd_arch_prefix)ARCH_VARIANT))
+      $(warning TARGET_$(combo_2nd_arch_prefix)ARCH_VARIANT, $(TARGET_$(combo_2nd_arch_prefix)ARCH_VARIANT), ignored! Use armv8-2a instead.)
+    endif
+    # Overwrite TARGET_$(combo_2nd_arch_prefix)ARCH_VARIANT
+    TARGET_$(combo_2nd_arch_prefix)ARCH_VARIANT := armv8-2a
+  endif
 # Many devices (incorrectly) use armv7-a-neon as the 2nd architecture variant
 # for cores that implement armv8-a ISAs. The following sets it to armv8-a.
-ifneq (,$(filter $(TARGET_$(combo_2nd_arch_prefix)CPU_VARIANT), $(KNOWN_ARMv8_CORES)))
+else ifneq (,$(filter $(TARGET_$(combo_2nd_arch_prefix)CPU_VARIANT), $(KNOWN_ARMv8_CORES)))
   ifneq ($(TARGET_$(combo_2nd_arch_prefix)ARCH_VARIANT),armv8-a)
     $(warning $(TARGET_$(combo_2nd_arch_prefix)CPU_VARIANT) is armv8-a.)
     ifneq (,$(TARGET_$(combo_2nd_arch_prefix)ARCH_VARIANT))
diff --git a/core/combo/arch/arm/armv8-2a.mk b/core/combo/arch/arm/armv8-2a.mk
new file mode 100644
index 0000000..c1d8182
--- /dev/null
+++ b/core/combo/arch/arm/armv8-2a.mk
@@ -0,0 +1,9 @@
+# Configuration for Linux on ARM.
+# Generating binaries for the ARMv8-2a architecture
+#
+# Many libraries are not aware of armv8-2a, and AArch32 is (almost) a superset
+# of armv7-a-neon. So just let them think we are just like v7.
+ARCH_ARM_HAVE_ARMV7A            := true
+ARCH_ARM_HAVE_VFP               := true
+ARCH_ARM_HAVE_VFP_D32           := true
+ARCH_ARM_HAVE_NEON              := true
diff --git a/core/config.mk b/core/config.mk
index d218408..b7c2ed1 100644
--- a/core/config.mk
+++ b/core/config.mk
@@ -17,46 +17,20 @@
 $(error done)
 endif
 
-# Only use ANDROID_BUILD_SHELL to wrap around bash.
-# DO NOT use other shells such as zsh.
-ifdef ANDROID_BUILD_SHELL
-SHELL := $(ANDROID_BUILD_SHELL)
-else
-# Use bash, not whatever shell somebody has installed as /bin/sh
-# This is repeated from main.mk, since envsetup.sh runs this file
-# directly.
-SHELL := /bin/bash
+BUILD_SYSTEM :=$= build/make/core
+BUILD_SYSTEM_COMMON :=$= build/make/common
+
+include $(BUILD_SYSTEM_COMMON)/core.mk
+
+# Mark variables that should be coming as environment variables from soong_ui
+# as readonly
+.KATI_READONLY := OUT_DIR TMPDIR BUILD_DATETIME_FILE
+ifdef CALLED_FROM_SETUP
+  .KATI_READONLY := CALLED_FROM_SETUP
 endif
-
-# Utility variables.
-empty :=
-space := $(empty) $(empty)
-comma := ,
-# Note that make will eat the newline just before endef.
-define newline
-
-
-endef
-# The pound character "#"
-define pound
-#
-endef
-# Unfortunately you can't simply define backslash as \ or \\.
-backslash := \a
-backslash := $(patsubst %a,%,$(backslash))
-
-# this turns off the suffix rules built into make
-.SUFFIXES:
-
-# this turns off the RCS / SCCS implicit rules of GNU Make
-% : RCS/%,v
-% : RCS/%
-% : %,v
-% : s.%
-% : SCCS/s.%
-
-# If a rule fails, delete $@.
-.DELETE_ON_ERROR:
+ifdef KATI_PACKAGE_MK_DIR
+  .KATI_READONLY := KATI_PACKAGE_MK_DIR
+endif
 
 # Mark variables deprecated/obsolete
 CHANGES_URL := https://android.googlesource.com/platform/build/+/master/Changes.md
@@ -77,6 +51,48 @@
   ,See $(CHANGES_URL)#other_envsetup_variables)
 $(KATI_obsolete_var PRODUCT_COMPATIBILITY_MATRIX_LEVEL_OVERRIDE,Set FCM Version in device manifest instead. See $(CHANGES_URL)#PRODUCT_COMPATIBILITY_MATRIX_LEVEL_OVERRIDE)
 $(KATI_obsolete_var USE_CLANG_PLATFORM_BUILD,Clang is the only supported Android compiler. See $(CHANGES_URL)#USE_CLANG_PLATFORM_BUILD)
+$(KATI_obsolete_var BUILD_DROIDDOC,Droiddoc is only supported in Soong. See details on build/soong/java/droiddoc.go)
+$(KATI_obsolete_var BUILD_APIDIFF,Apidiff is only supported in Soong. See details on build/soong/java/droiddoc.go)
+$(KATI_obsolete_var \
+  DEFAULT_GCC_CPP_STD_VERSION \
+  HOST_GLOBAL_CFLAGS 2ND_HOST_GLOBAL_CFLAGS \
+  HOST_GLOBAL_CONLYFLAGS 2ND_HOST_GLOBAL_CONLYFLAGS \
+  HOST_GLOBAL_CPPFLAGS 2ND_HOST_GLOBAL_CPPFLAGS \
+  HOST_GLOBAL_LDFLAGS 2ND_HOST_GLOBAL_LDFLAGS \
+  HOST_GLOBAL_LLDFLAGS 2ND_HOST_GLOBAL_LLDFLAGS \
+  HOST_CLANG_SUPPORTED 2ND_HOST_CLANG_SUPPORTED \
+  HOST_CC 2ND_HOST_CC \
+  HOST_CXX 2ND_HOST_CXX \
+  HOST_CROSS_GLOBAL_CFLAGS 2ND_HOST_CROSS_GLOBAL_CFLAGS \
+  HOST_CROSS_GLOBAL_CONLYFLAGS 2ND_HOST_CROSS_GLOBAL_CONLYFLAGS \
+  HOST_CROSS_GLOBAL_CPPFLAGS 2ND_HOST_CROSS_GLOBAL_CPPFLAGS \
+  HOST_CROSS_GLOBAL_LDFLAGS 2ND_HOST_CROSS_GLOBAL_LDFLAGS \
+  HOST_CROSS_GLOBAL_LLDFLAGS 2ND_HOST_CROSS_GLOBAL_LLDFLAGS \
+  HOST_CROSS_CLANG_SUPPORTED 2ND_HOST_CROSS_CLANG_SUPPORTED \
+  HOST_CROSS_CC 2ND_HOST_CROSS_CC \
+  HOST_CROSS_CXX 2ND_HOST_CROSS_CXX \
+  TARGET_GLOBAL_CFLAGS 2ND_TARGET_GLOBAL_CFLAGS \
+  TARGET_GLOBAL_CONLYFLAGS 2ND_TARGET_GLOBAL_CONLYFLAGS \
+  TARGET_GLOBAL_CPPFLAGS 2ND_TARGET_GLOBAL_CPPFLAGS \
+  TARGET_GLOBAL_LDFLAGS 2ND_TARGET_GLOBAL_LDFLAGS \
+  TARGET_GLOBAL_LLDFLAGS 2ND_TARGET_GLOBAL_LLDFLAGS \
+  TARGET_CLANG_SUPPORTED 2ND_TARGET_CLANG_SUPPORTED \
+  TARGET_CC 2ND_TARGET_CC \
+  TARGET_CXX 2ND_TARGET_CXX \
+  TARGET_TOOLCHAIN_ROOT 2ND_TARGET_TOOLCHAIN_ROOT \
+  HOST_TOOLCHAIN_ROOT 2ND_HOST_TOOLCHAIN_ROOT \
+  HOST_CROSS_TOOLCHAIN_ROOT 2ND_HOST_CROSS_TOOLCHAIN_ROOT \
+  HOST_TOOLS_PREFIX 2ND_HOST_TOOLS_PREFIX \
+  HOST_CROSS_TOOLS_PREFIX 2ND_HOST_CROSS_TOOLS_PREFIX \
+  HOST_GCC_VERSION 2ND_HOST_GCC_VERSION \
+  HOST_CROSS_GCC_VERSION 2ND_HOST_CROSS_GCC_VERSION \
+  TARGET_NDK_GCC_VERSION 2ND_TARGET_NDK_GCC_VERSION \
+  GLOBAL_CFLAGS_NO_OVERRIDE GLOBAL_CPPFLAGS_NO_OVERRIDE \
+  ,GCC support has been removed. Use Clang instead)
+$(KATI_obsolete_var DIST_DIR dist_goal,Use dist-for-goals instead. See $(CHANGES_URL)#dist)
+
+# This is marked as obsolete in envsetup.mk after reading the BoardConfig.mk
+$(KATI_deprecate_export It is a global setting. See $(CHANGES_URL)#export_keyword)
 
 CHANGES_URL :=
 
@@ -86,22 +102,23 @@
 
 ORIGINAL_MAKECMDGOALS := $(MAKECMDGOALS)
 
-dist_goal := $(strip $(filter dist,$(MAKECMDGOALS)))
-MAKECMDGOALS := $(strip $(filter-out dist,$(MAKECMDGOALS)))
-
 UNAME := $(shell uname -sm)
 
 SRC_TARGET_DIR := $(TOPDIR)build/target
-SRC_API_DIR := $(TOPDIR)prebuilts/sdk/api
-SRC_SYSTEM_API_DIR := $(TOPDIR)prebuilts/sdk/system-api
-SRC_TEST_API_DIR := $(TOPDIR)prebuilts/sdk/test-api
 
 # Some specific paths to tools
 SRC_DROIDDOC_DIR := $(TOPDIR)build/make/tools/droiddoc
 
+# Mark some inputs as readonly
+ifdef TARGET_DEVICE_DIR
+  .KATI_READONLY := TARGET_DEVICE_DIR
+endif
+
 # Set up efficient math functions which are used in make.
 # Here since this file is included by envsetup as well as during build.
-include $(BUILD_SYSTEM)/math.mk
+include $(BUILD_SYSTEM_COMMON)/math.mk
+
+include $(BUILD_SYSTEM_COMMON)/strings.mk
 
 # Various mappings to avoid hard-coding paths all over the place
 include $(BUILD_SYSTEM)/pathmap.mk
@@ -134,8 +151,6 @@
 BUILD_JAVA_LIBRARY:= $(BUILD_SYSTEM)/java_library.mk
 BUILD_STATIC_JAVA_LIBRARY:= $(BUILD_SYSTEM)/static_java_library.mk
 BUILD_HOST_JAVA_LIBRARY:= $(BUILD_SYSTEM)/host_java_library.mk
-BUILD_DROIDDOC:= $(BUILD_SYSTEM)/droiddoc.mk
-BUILD_APIDIFF:= $(BUILD_SYSTEM)/apidiff.mk
 BUILD_COPY_HEADERS := $(BUILD_SYSTEM)/copy_headers.mk
 BUILD_NATIVE_TEST := $(BUILD_SYSTEM)/native_test.mk
 BUILD_NATIVE_BENCHMARK := $(BUILD_SYSTEM)/native_benchmark.mk
@@ -155,13 +170,6 @@
 BUILD_HOST_TEST_CONFIG := $(BUILD_SYSTEM)/host_test_config.mk
 BUILD_TARGET_TEST_CONFIG := $(BUILD_SYSTEM)/target_test_config.mk
 
-INSTRUMENTATION_TEST_CONFIG_TEMPLATE := $(BUILD_SYSTEM)/instrumentation_test_config_template.xml
-NATIVE_TEST_CONFIG_TEMPLATE := $(BUILD_SYSTEM)/native_test_config_template.xml
-EMPTY_TEST_CONFIG := $(BUILD_SYSTEM)/empty_test_config.xml
-
-# Tool to generate TradeFed test config file automatically.
-AUTOGEN_TEST_CONFIG_SCRIPT := build/make/tools/auto_gen_test_config.py
-
 # ###############################################################
 # Parse out any modifier targets.
 # ###############################################################
@@ -196,12 +204,25 @@
 JAVA_TMPDIR_ARG :=
 endif
 
+# A list of the jars that provide information about usages of the hidden API.
+# The core-oj-hiddenapi provides information for the core-oj jar.
+HIDDENAPI_EXTRA_APP_USAGE_JARS := \
+    core-oj-hiddenapi \
+
 # Default to remove the org.apache.http.legacy from bootclasspath
 ifeq ($(REMOVE_OAHL_FROM_BCP),)
 REMOVE_OAHL_FROM_BCP := true
 endif
 
 # ###############################################################
+# Broken build defaults
+# ###############################################################
+BUILD_BROKEN_ANDROIDMK_EXPORTS :=
+BUILD_BROKEN_DUP_COPY_HEADERS :=
+BUILD_BROKEN_DUP_RULES :=
+BUILD_BROKEN_PHONY_TARGETS :=
+
+# ###############################################################
 # Include sub-configuration files
 # ###############################################################
 
@@ -301,8 +322,8 @@
 
 # Commands to generate .toc file from Darwin dynamic library.
 define _gen_toc_command_for_macho
-$(hide) otool -l $(1) | grep LC_ID_DYLIB -A 5 > $(2)
-$(hide) nm -gP $(1) | cut -f1-2 -d" " | (grep -v U$$ >> $(2) || true)
+$(hide) $(HOST_OTOOL) -l $(1) | grep LC_ID_DYLIB -A 5 > $(2)
+$(hide) $(HOST_NM) -gP $(1) | cut -f1-2 -d" " | (grep -v U$$ >> $(2) || true)
 endef
 
 combo_target := HOST_
@@ -346,10 +367,6 @@
 ifeq ($(CALLED_FROM_SETUP),true)
 include $(BUILD_SYSTEM)/ccache.mk
 include $(BUILD_SYSTEM)/goma.mk
-
-export CC_WRAPPER
-export CXX_WRAPPER
-export JAVAC_WRAPPER
 endif
 
 ifdef TARGET_PREFER_32_BIT
@@ -357,10 +374,18 @@
 TARGET_PREFER_32_BIT_EXECUTABLES := true
 endif
 
-ifeq (,$(TARGET_SUPPORTS_32_BIT_APPS)$(TARGET_SUPPORTS_64_BIT_APPS))
+ifeq (,$(filter true,$(TARGET_SUPPORTS_32_BIT_APPS) $(TARGET_SUPPORTS_64_BIT_APPS)))
   TARGET_SUPPORTS_32_BIT_APPS := true
 endif
 
+# Sanity check to warn about likely cryptic errors later in the build.
+ifeq ($(TARGET_IS_64_BIT),true)
+  ifeq (,$(filter true false,$(TARGET_SUPPORTS_64_BIT_APPS)))
+    $(warning Building a 32-bit-app-only product on a 64-bit device. \
+      If this is intentional, set TARGET_SUPPORTS_64_BIT_APPS := false)
+  endif
+endif
+
 # "ro.product.cpu.abilist32" and "ro.product.cpu.abilist64" are
 # comma separated lists of the 32 and 64 bit ABIs (in order of
 # preference) that the target supports. If TARGET_CPU_ABI_LIST_{32,64}_BIT
@@ -507,8 +532,8 @@
 ifdef PDK_FUSION_PLATFORM_ZIP
 TARGET_BUILD_PDK := true
 ifeq (,$(wildcard $(PDK_FUSION_PLATFORM_ZIP)))
-  ifneq (,$(wildcard $(dir $(PDK_FUSION_PLATFORM_ZIP))/pdk.mk))
-    PDK_FUSION_PLATFORM_DIR := $(dir $(PDK_FUSION_PLATFORM_ZIP))
+  ifneq (,$(wildcard $(patsubst %.zip,%,$(PDK_FUSION_PLATFORM_ZIP))/pdk.mk))
+    PDK_FUSION_PLATFORM_DIR := $(patsubst %.zip,%,$(PDK_FUSION_PLATFORM_ZIP))
     PDK_FUSION_PLATFORM_ZIP :=
   else
     $(error Cannot find file $(PDK_FUSION_PLATFORM_ZIP).)
@@ -549,8 +574,9 @@
 prebuilt_build_tools := prebuilts/build-tools
 prebuilt_build_tools_wrappers := prebuilts/build-tools/common/bin
 prebuilt_build_tools_jars := prebuilts/build-tools/common/framework
+prebuilt_build_tools_bin_noasan := $(prebuilt_build_tools)/$(HOST_PREBUILT_TAG)/bin
 ifeq ($(filter address,$(SANITIZE_HOST)),)
-prebuilt_build_tools_bin := $(prebuilt_build_tools)/$(HOST_PREBUILT_TAG)/bin
+prebuilt_build_tools_bin := $(prebuilt_build_tools_bin_noasan)
 else
 prebuilt_build_tools_bin := $(prebuilt_build_tools)/$(HOST_PREBUILT_TAG)/asan/bin
 endif
@@ -559,14 +585,8 @@
 
 # Work around for b/68406220
 # This should match the soong version.
-ifndef USE_D8
-  USE_D8 := true
-endif
-
-# Default R8 behavior when USE_R8 is not specified.
-ifndef USE_R8
-  USE_R8 := false
-endif
+USE_D8 := true
+.KATI_READONLY := USE_D8
 
 #
 # Tools that are prebuilts for TARGET_BUILD_APPS
@@ -575,7 +595,6 @@
   AIDL := $(HOST_OUT_EXECUTABLES)/aidl
   AAPT := $(HOST_OUT_EXECUTABLES)/aapt
   AAPT2 := $(HOST_OUT_EXECUTABLES)/aapt2
-  DESUGAR := $(HOST_OUT_JAVA_LIBRARIES)/desugar.jar
   MAINDEXCLASSES := $(HOST_OUT_EXECUTABLES)/mainDexClasses
   SIGNAPK_JAR := $(HOST_OUT_JAVA_LIBRARIES)/signapk$(COMMON_JAVA_PACKAGE_SUFFIX)
   SIGNAPK_JNI_LIBRARY_PATH := $(HOST_OUT_SHARED_LIBRARIES)
@@ -585,7 +604,6 @@
   AIDL := $(prebuilt_build_tools_bin)/aidl
   AAPT := $(prebuilt_sdk_tools_bin)/aapt
   AAPT2 := $(prebuilt_sdk_tools_bin)/aapt2
-  DESUGAR := $(prebuilt_build_tools_jars)/desugar.jar
   MAINDEXCLASSES := $(prebuilt_sdk_tools)/mainDexClasses
   SIGNAPK_JAR := $(prebuilt_sdk_tools)/lib/signapk$(COMMON_JAVA_PACKAGE_SUFFIX)
   SIGNAPK_JNI_LIBRARY_PATH := $(prebuilt_sdk_tools)/$(HOST_OS)/lib64
@@ -608,6 +626,7 @@
 CKATI := $(prebuilt_build_tools_bin)/ckati
 DEPMOD := $(HOST_OUT_EXECUTABLES)/depmod
 FILESLIST := $(SOONG_HOST_OUT_EXECUTABLES)/fileslist
+HOST_INIT_VERIFIER := $(HOST_OUT_EXECUTABLES)/host_init_verifier
 MAKEPARALLEL := $(prebuilt_build_tools_bin)/makeparallel
 SOONG_JAVAC_WRAPPER := $(SOONG_HOST_OUT_EXECUTABLES)/soong_javac_wrapper
 SOONG_ZIP := $(SOONG_HOST_OUT_EXECUTABLES)/soong_zip
@@ -619,13 +638,13 @@
 # ---------------------------------------------------------------
 # Generic tools.
 
-LEX := prebuilts/misc/$(BUILD_OS)-$(HOST_PREBUILT_ARCH)/flex/flex-2.5.39
+LEX := $(prebuilt_build_tools_bin_noasan)/flex
 # The default PKGDATADIR built in the prebuilt bison is a relative path
 # prebuilts/build-tools/common/bison.
 # To run bison from elsewhere you need to set up enviromental variable
 # BISON_PKGDATADIR.
 BISON_PKGDATADIR := $(PWD)/prebuilts/build-tools/common/bison
-BISON := prebuilts/build-tools/$(BUILD_OS)-$(HOST_PREBUILT_ARCH)/bin/bison
+BISON := $(prebuilt_build_tools_bin_noasan)/bison
 YACC := $(BISON) -d
 BISON_DATA := $(wildcard $(BISON_PKGDATADIR)/* $(BISON_PKGDATADIR)/*/*)
 
@@ -639,10 +658,7 @@
 BREAKPAD_GENERATE_SYMBOLS := false
 endif
 PROTOC := $(HOST_OUT_EXECUTABLES)/aprotoc$(HOST_EXECUTABLE_SUFFIX)
-NANOPB_SRCS := external/nanopb-c/generator/protoc-gen-nanopb \
-    $(wildcard external/nanopb-c/generator/*.py \
-               external/nanopb-c/generator/google/*.py \
-               external/nanopb-c/generator/proto/*.py)
+NANOPB_SRCS := $(HOST_OUT_EXECUTABLES)/protoc-gen-nanopb
 VTSC := $(HOST_OUT_EXECUTABLES)/vtsc$(HOST_EXECUTABLE_SUFFIX)
 MKBOOTFS := $(HOST_OUT_EXECUTABLES)/mkbootfs$(HOST_EXECUTABLE_SUFFIX)
 MINIGZIP := $(HOST_OUT_EXECUTABLES)/minigzip$(HOST_EXECUTABLE_SUFFIX)
@@ -665,7 +681,7 @@
 APICHECK := $(HOST_OUT_EXECUTABLES)/apicheck$(HOST_EXECUTABLE_SUFFIX)
 FS_GET_STATS := $(HOST_OUT_EXECUTABLES)/fs_get_stats$(HOST_EXECUTABLE_SUFFIX)
 MAKE_EXT4FS := $(HOST_OUT_EXECUTABLES)/mke2fs$(HOST_EXECUTABLE_SUFFIX)
-MKEXTUSERIMG := $(HOST_OUT_EXECUTABLES)/mkuserimg_mke2fs.sh
+MKEXTUSERIMG := $(HOST_OUT_EXECUTABLES)/mkuserimg_mke2fs
 MKE2FS_CONF := system/extras/ext4_utils/mke2fs.conf
 BLK_ALLOC_TO_BASE_FS := $(HOST_OUT_EXECUTABLES)/blk_alloc_to_base_fs$(HOST_EXECUTABLE_SUFFIX)
 MAKE_SQUASHFS := $(HOST_OUT_EXECUTABLES)/mksquashfs$(HOST_EXECUTABLE_SUFFIX)
@@ -681,6 +697,8 @@
 DATA_BINDING_COMPILER := $(HOST_OUT_JAVA_LIBRARIES)/databinding-compiler.jar
 FAT16COPY := build/make/tools/fat16copy.py
 CHECK_LINK_TYPE := build/make/tools/check_link_type.py
+LPMAKE := $(HOST_OUT_EXECUTABLES)/lpmake$(HOST_EXECUTABLE_SUFFIX)
+BUILD_SUPER_IMAGE := build/make/tools/releasetools/build_super_image.py
 
 PROGUARD := external/proguard/bin/proguard.sh
 JAVATAGS := build/make/tools/java-event-log-tags.py
@@ -688,6 +706,7 @@
 BUILD_IMAGE_SRCS := $(wildcard build/make/tools/releasetools/*.py)
 APPEND2SIMG := $(HOST_OUT_EXECUTABLES)/append2simg
 VERITY_SIGNER := $(HOST_OUT_EXECUTABLES)/verity_signer
+BUILD_VERITY_METADATA := $(HOST_OUT_EXECUTABLES)/build_verity_metadata.py
 BUILD_VERITY_TREE := $(HOST_OUT_EXECUTABLES)/build_verity_tree
 BOOT_SIGNER := $(HOST_OUT_EXECUTABLES)/boot_signer
 FUTILITY := $(HOST_OUT_EXECUTABLES)/futility-host
@@ -698,42 +717,22 @@
 DEXDUMP := $(HOST_OUT_EXECUTABLES)/dexdump2$(BUILD_EXECUTABLE_SUFFIX)
 PROFMAN := $(HOST_OUT_EXECUTABLES)/profman
 HIDDENAPI := $(HOST_OUT_EXECUTABLES)/hiddenapi
-
-# relocation packer
-RELOCATION_PACKER := prebuilts/misc/$(BUILD_OS)-$(HOST_PREBUILT_ARCH)/relocation_packer/relocation_packer
+CLASS2GREYLIST := $(HOST_OUT_EXECUTABLES)/class2greylist
 
 FINDBUGS_DIR := external/owasp/sanitizer/tools/findbugs/bin
 FINDBUGS := $(FINDBUGS_DIR)/findbugs
 
 JETIFIER := prebuilts/sdk/tools/jetifier/jetifier-standalone/bin/jetifier-standalone
 
-# Tool to merge AndroidManifest.xmls
-ANDROID_MANIFEST_MERGER_CLASSPATH := \
-    prebuilts/gradle-plugin/com/android/tools/build/manifest-merger/26.0.0-beta2/manifest-merger-26.0.0-beta2.jar \
-    prebuilts/gradle-plugin/com/android/tools/sdk-common/26.0.0-beta2/sdk-common-26.0.0-beta2.jar \
-    prebuilts/gradle-plugin/com/android/tools/common/26.0.0-beta2/common-26.0.0-beta2.jar \
-    prebuilts/misc/common/guava/guava-21.0.jar
-ANDROID_MANIFEST_MERGER := $(JAVA) \
-    -classpath $(subst $(space),:,$(strip $(ANDROID_MANIFEST_MERGER_CLASSPATH))) \
-    com.android.manifmerger.Merger
-
 COLUMN:= column
 
-ifeq ($(EXPERIMENTAL_USE_OPENJDK9),)
-ifeq ($(RUN_ERROR_PRONE),true)
-USE_OPENJDK9 :=
-else
 USE_OPENJDK9 := true
-endif
-TARGET_OPENJDK9 :=
-else ifeq ($(EXPERIMENTAL_USE_OPENJDK9),false)
-USE_OPENJDK9 :=
+
+ifeq ($(EXPERIMENTAL_USE_OPENJDK9),)
 TARGET_OPENJDK9 :=
 else ifeq ($(EXPERIMENTAL_USE_OPENJDK9),1.8)
-USE_OPENJDK9 := true
 TARGET_OPENJDK9 :=
 else ifeq ($(EXPERIMENTAL_USE_OPENJDK9),true)
-USE_OPENJDK9 := true
 TARGET_OPENJDK9 := true
 endif
 
@@ -748,8 +747,7 @@
 endif
 
 APICHECK_CLASSPATH_ENTRIES := \
-    $(HOST_OUT_JAVA_LIBRARIES)/doclava$(COMMON_JAVA_PACKAGE_SUFFIX) \
-    $(HOST_OUT_JAVA_LIBRARIES)/jsilver$(COMMON_JAVA_PACKAGE_SUFFIX) \
+    $(HOST_OUT_JAVA_LIBRARIES)/apicheck$(COMMON_JAVA_PACKAGE_SUFFIX) \
     $(HOST_JDK_TOOLS_JAR) \
     )
 APICHECK_CLASSPATH := $(subst $(space),:,$(strip $(APICHECK_CLASSPATH_ENTRIES)))
@@ -802,12 +800,16 @@
 PRODUCT_FULL_TREBLE_OVERRIDE ?=
 $(foreach req,$(requirements),$(eval $(req)_OVERRIDE ?=))
 
+# TODO(b/114488870): disallow PRODUCT_FULL_TREBLE_OVERRIDE from being used.
 .KATI_READONLY := \
     PRODUCT_FULL_TREBLE_OVERRIDE \
     $(foreach req,$(requirements),$(req)_OVERRIDE) \
     $(requirements) \
     PRODUCT_FULL_TREBLE \
 
+$(KATI_obsolete_var $(foreach req,$(requirements),$(req)_OVERRIDE) \
+    ,This should be referenced without the _OVERRIDE suffix.)
+
 requirements :=
 
 # BOARD_PROPERTY_OVERRIDES_SPLIT_ENABLED can be true only if early-mount of
@@ -856,11 +858,6 @@
 
 
 ifdef PRODUCT_SHIPPING_API_LEVEL
-  ifneq ($(call math_gt_or_eq,$(PRODUCT_SHIPPING_API_LEVEL),27),)
-    ifneq ($(TARGET_USES_MKE2FS),true)
-      $(error When PRODUCT_SHIPPING_API_LEVEL >= 27, TARGET_USES_MKE2FS must be true)
-    endif
-  endif
   ifneq ($(call numbers_less_than,$(PRODUCT_SHIPPING_API_LEVEL),$(BOARD_SYSTEMSDK_VERSIONS)),)
     $(error BOARD_SYSTEMSDK_VERSIONS ($(BOARD_SYSTEMSDK_VERSIONS)) must all be greater than or equal to PRODUCT_SHIPPING_API_LEVEL ($(PRODUCT_SHIPPING_API_LEVEL)))
   endif
@@ -870,10 +867,10 @@
         $(error When PRODUCT_SHIPPING_API_LEVEL >= 28, TARGET_USES_64_BIT_BINDER must be true)
       endif
     endif
-    ifeq ($(PRODUCT_FULL_TREBLE),true)
-      ifneq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE), true)
-        $(error When PRODUCT_SHIPPING_API_LEVEL >= 28, BOARD_BUILD_SYSTEM_ROOT_IMAGE must be true)
-      endif
+  endif
+  ifneq ($(call math_gt_or_eq,$(PRODUCT_SHIPPING_API_LEVEL),29),)
+    ifneq ($(BOARD_OTA_FRAMEWORK_VBMETA_VERSION_OVERRIDE),)
+      $(error When PRODUCT_SHIPPING_API_LEVEL >= 29, BOARD_OTA_FRAMEWORK_VBMETA_VERSION_OVERRIDE cannot be set)
     endif
   endif
 endif
@@ -919,13 +916,174 @@
 # A list of SEPolicy versions, besides PLATFORM_SEPOLICY_VERSION, that the framework supports.
 PLATFORM_SEPOLICY_COMPAT_VERSIONS := \
     26.0 \
-    27.0
+    27.0 \
+    28.0 \
 
 .KATI_READONLY := \
     PLATFORM_SEPOLICY_COMPAT_VERSIONS \
     PLATFORM_SEPOLICY_VERSION \
     TOT_SEPOLICY_VERSION \
 
+ifeq ($(PRODUCT_OTA_ENFORCE_VINTF_KERNEL_REQUIREMENTS),)
+  ifdef PRODUCT_SHIPPING_API_LEVEL
+    ifeq (true,$(call math_gt_or_eq,$(PRODUCT_SHIPPING_API_LEVEL),29))
+      PRODUCT_OTA_ENFORCE_VINTF_KERNEL_REQUIREMENTS := true
+    endif
+  endif
+endif
+.KATI_READONLY := PRODUCT_OTA_ENFORCE_VINTF_KERNEL_REQUIREMENTS
+
+ifeq ($(PRODUCT_RETROFIT_DYNAMIC_PARTITIONS),true)
+  ifneq ($(PRODUCT_USE_DYNAMIC_PARTITIONS),true)
+    $(error PRODUCT_USE_DYNAMIC_PARTITIONS must be true when PRODUCT_RETROFIT_DYNAMIC_PARTITIONS \
+        is set)
+  endif
+  ifdef PRODUCT_SHIPPING_API_LEVEL
+    ifeq (true,$(call math_gt_or_eq,$(PRODUCT_SHIPPING_API_LEVEL),29))
+      $(error Devices with shipping API level $(PRODUCT_SHIPPING_API_LEVEL) must not set \
+          PRODUCT_RETROFIT_DYNAMIC_PARTITIONS)
+    endif
+  endif
+endif
+
+ifeq ($(PRODUCT_USE_DYNAMIC_PARTITIONS),true)
+    requirements := \
+        PRODUCT_USE_DYNAMIC_PARTITION_SIZE \
+        PRODUCT_BUILD_SUPER_PARTITION \
+
+    $(foreach req,$(requirements),$(if $(filter false,$($(req))),\
+        $(error PRODUCT_USE_DYNAMIC_PARTITIONS requires $(req) to be true)))
+
+    requirements :=
+endif
+
+ifeq ($(PRODUCT_USE_DYNAMIC_PARTITION_SIZE),true)
+
+ifneq ($(BOARD_SYSTEMIMAGE_PARTITION_SIZE),)
+ifneq ($(BOARD_SYSTEMIMAGE_PARTITION_RESERVED_SIZE),)
+$(error Should not define BOARD_SYSTEMIMAGE_PARTITION_SIZE and \
+    BOARD_SYSTEMIMAGE_PARTITION_RESERVED_SIZE together)
+endif
+endif
+
+ifneq ($(BOARD_VENDORIMAGE_PARTITION_SIZE),)
+ifneq ($(BOARD_VENDORIMAGE_PARTITION_RESERVED_SIZE),)
+$(error Should not define BOARD_VENDORIMAGE_PARTITION_SIZE and \
+    BOARD_VENDORIMAGE_PARTITION_RESERVED_SIZE together)
+endif
+endif
+
+ifneq ($(BOARD_ODMIMAGE_PARTITION_SIZE),)
+ifneq ($(BOARD_ODMIMAGE_PARTITION_RESERVED_SIZE),)
+$(error Should not define BOARD_ODMIMAGE_PARTITION_SIZE and \
+    BOARD_ODMIMAGE_PARTITION_RESERVED_SIZE together)
+endif
+endif
+
+ifneq ($(BOARD_PRODUCTIMAGE_PARTITION_SIZE),)
+ifneq ($(BOARD_PRODUCTIMAGE_PARTITION_RESERVED_SIZE),)
+$(error Should not define BOARD_PRODUCTIMAGE_PARTITION_SIZE and \
+    BOARD_PRODUCTIMAGE_PARTITION_RESERVED_SIZE together)
+endif
+endif
+
+ifneq ($(BOARD_PRODUCT_SERVICESIMAGE_PARTITION_SIZE),)
+ifneq ($(BOARD_PRODUCT_SERVICESIMAGE_PARTITION_RESERVED_SIZE),)
+$(error Should not define BOARD_PRODUCT_SERVICESIMAGE_PARTITION_SIZE and \
+    BOARD_PRODUCT_SERVICESIMAGE_PARTITION_RESERVED_SIZE together)
+endif
+endif
+
+endif # PRODUCT_USE_DYNAMIC_PARTITION_SIZE
+
+ifeq ($(PRODUCT_BUILD_SUPER_PARTITION),true)
+
+# BOARD_SUPER_PARTITION_GROUPS defines a list of "updatable groups". Each updatable group is a
+# group of partitions that share the same pool of free spaces.
+# For each group in BOARD_SUPER_PARTITION_GROUPS, a BOARD_{GROUP}_SIZE and
+# BOARD_{GROUP}_PARTITION_PARTITION_LIST may be defined.
+#     - BOARD_{GROUP}_SIZE: The maximum sum of sizes of all partitions in the group.
+#       Must not be empty.
+#     - BOARD_{GROUP}_PARTITION_PARTITION_LIST: the list of partitions that belongs to this group.
+#       If empty, no partitions belong to this group, and the sum of sizes is effectively 0.
+$(foreach group,$(call to-upper,$(BOARD_SUPER_PARTITION_GROUPS)), \
+    $(eval BOARD_$(group)_SIZE := $(strip $(BOARD_$(group)_SIZE))) \
+    $(if $(BOARD_$(group)_SIZE),,$(error BOARD_$(group)_SIZE must not be empty)) \
+    $(eval .KATI_READONLY := BOARD_$(group)_SIZE) \
+    $(eval BOARD_$(group)_PARTITION_LIST ?=) \
+    $(eval .KATI_READONLY := BOARD_$(group)_PARTITION_LIST) \
+)
+
+# BOARD_*_PARTITION_LIST: a list of the following tokens
+valid_super_partition_list := system vendor product product_services odm
+$(foreach group,$(call to-upper,$(BOARD_SUPER_PARTITION_GROUPS)), \
+    $(if $(filter-out $(valid_super_partition_list),$(BOARD_$(group)_PARTITION_LIST)), \
+        $(error BOARD_$(group)_PARTITION_LIST contains invalid partition name \
+            $(filter-out $(valid_super_partition_list),$(BOARD_$(group)_PARTITION_LIST)). \
+            Valid names are $(valid_super_partition_list))))
+valid_super_partition_list :=
+
+
+# Define BOARD_SUPER_PARTITION_PARTITION_LIST, the sum of all BOARD_*_PARTITION_LIST
+ifdef BOARD_SUPER_PARTITION_PARTITION_LIST
+$(error BOARD_SUPER_PARTITION_PARTITION_LIST should not be defined, but computed from \
+    BOARD_SUPER_PARTITION_GROUPS and BOARD_*_PARTITION_LIST)
+endif
+BOARD_SUPER_PARTITION_PARTITION_LIST := \
+    $(foreach group,$(call to-upper,$(BOARD_SUPER_PARTITION_GROUPS)), \
+        $(BOARD_$(group)_PARTITION_LIST))
+.KATI_READONLY := BOARD_SUPER_PARTITION_PARTITION_LIST
+
+ifneq ($(BOARD_SUPER_PARTITION_SIZE),)
+ifeq ($(PRODUCT_RETROFIT_DYNAMIC_PARTITIONS),true)
+
+# The metadata device must be specified manually for retrofitting.
+ifeq ($(BOARD_SUPER_PARTITION_METADATA_DEVICE),)
+$(error Must specify BOARD_SUPER_PARTITION_METADATA_DEVICE if PRODUCT_RETROFIT_DYNAMIC_PARTITIONS=true.)
+endif
+
+# The super partition block device list must be specified manually for retrofitting.
+ifeq ($(BOARD_SUPER_PARTITION_BLOCK_DEVICES),)
+$(error Must specify BOARD_SUPER_PARTITION_BLOCK_DEVICES if PRODUCT_RETROFIT_DYNAMIC_PARTITIONS=true.)
+endif
+
+# The metadata device must be included in the super partition block device list.
+ifeq (,$(filter $(BOARD_SUPER_PARTITION_METADATA_DEVICE),$(BOARD_SUPER_PARTITION_BLOCK_DEVICES)))
+$(error BOARD_SUPER_PARTITION_METADATA_DEVICE is not listed in BOARD_SUPER_PARTITION_BLOCK_DEVICES.)
+endif
+
+# The metadata device must be supplied to init via the kernel command-line.
+BOARD_KERNEL_CMDLINE += androidboot.super_partition=$(BOARD_SUPER_PARTITION_METADATA_DEVICE)
+
+else # PRODUCT_RETROFIT_DYNAMIC_PARTITIONS
+
+# These should not be specified on devices launching with dynamic partition support.
+ifdef BOARD_SUPER_PARTITION_BLOCK_DEVICES
+$(error BOARD_SUPER_PARTITION_BLOCK_DEVICES can only be used if PRODUCT_RETROFIT_DYNAMIC_PARTITIONS is true.)
+endif
+ifdef BOARD_SUPER_PARTITION_METADATA_DEVICE
+$(error BOARD_SUPER_PARTITION_METADATA_DEVICE can only be used if PRODUCT_RETROFIT_DYNAMIC_PARTITIONS is true.)
+endif
+
+# For normal devices, we populate BOARD_SUPER_PARTITION_BLOCK_DEVICES so the
+# build can handle both cases consistently.
+BOARD_SUPER_PARTITION_BLOCK_DEVICES := super
+BOARD_SUPER_PARTITION_METADATA_DEVICE := super
+BOARD_SUPER_PARTITION_SUPER_DEVICE_SIZE := $(BOARD_SUPER_PARTITION_SIZE)
+
+endif # PRODUCT_RETROFIT_DYNAMIC_PARTITIONS
+endif # BOARD_SUPER_PARTITION_SIZE
+.KATI_READONLY := BOARD_SUPER_PARTITION_BLOCK_DEVICES
+.KATI_READONLY := BOARD_SUPER_PARTITION_METADATA_DEVICE
+
+$(foreach device,$(call to-upper,$(BOARD_SUPER_PARTITION_BLOCK_DEVICES)), \
+    $(eval BOARD_SUPER_PARTITION_$(device)_DEVICE_SIZE := $(strip $(BOARD_SUPER_PARTITION_$(device)_DEVICE_SIZE))) \
+    $(if $(BOARD_SUPER_PARTITION_$(device)_DEVICE_SIZE),, \
+        $(error $(BOARD_SUPER_PARTITION_$(device)_DEVICE_SIZE must not be empty))) \
+    $(eval .KATI_READONLY := BOARD_SUPER_PARTITION_$(device)_DEVICE_SIZE))
+
+endif # PRODUCT_BUILD_SUPER_PARTITION
+
 # ###############################################################
 # Set up final options.
 # ###############################################################
@@ -977,6 +1135,29 @@
 SUPPORT_LIBRARY_ROOT := frameworks/support
 endif
 
+get-sdk-version = $(if $(findstring _,$(1)),$(subst core_,,$(subst system_,,$(subst test_,,$(1)))),$(1))
+get-sdk-api = $(if $(findstring _,$(1)),$(patsubst %_$(call get-sdk-version,$(1)),%,$(1)),public)
+get-prebuilt-sdk-dir = $(HISTORICAL_SDK_VERSIONS_ROOT)/$(call get-sdk-version,$(1))/$(call get-sdk-api,$(1))
+
+# Resolve LOCAL_SDK_VERSION to prebuilt module name, e.g.:
+# 23 -> sdk_public_23_android
+# system_current -> sdk_system_current_android
+# $(1): An sdk version (LOCAL_SDK_VERSION)
+# $(2): optional library name (default: android)
+define resolve-prebuilt-sdk-module
+$(if $(findstring _,$(1)),\
+  sdk_$(1)_$(or $(2),android),\
+  sdk_public_$(1)_$(or $(2),android))
+endef
+
+# Resolve LOCAL_SDK_VERSION to prebuilt android.jar
+# $(1): LOCAL_SDK_VERSION
+resolve-prebuilt-sdk-jar-path = $(call get-prebuilt-sdk-dir,$(1))/android.jar
+
+# Resolve LOCAL_SDK_VERSION to prebuilt framework.aidl
+# $(1): An sdk version (LOCAL_SDK_VERSION)
+resolve-prebuilt-sdk-aidl-path = $(call get-prebuilt-sdk-dir,$(call get-sdk-version,$(1)))/framework.aidl
+
 # Historical SDK version N is stored in $(HISTORICAL_SDK_VERSIONS_ROOT)/N.
 # The 'current' version is whatever this source tree is.
 #
@@ -993,39 +1174,37 @@
     ( sgrax $(1) | sort -g ) )
 endef
 
-TARGET_AVAILABLE_SDK_VERSIONS := $(call numerically_sort,\
-    $(patsubst $(HISTORICAL_SDK_VERSIONS_ROOT)/%/android.jar,%, \
-    $(wildcard $(HISTORICAL_SDK_VERSIONS_ROOT)/*/android.jar)))
-
-TARGET_AVAILABLE_SDK_VERSIONS := $(addprefix system_,$(call numerically_sort,\
-    $(patsubst $(HISTORICAL_SDK_VERSIONS_ROOT)/%/android_system.jar,%, \
-    $(wildcard $(HISTORICAL_SDK_VERSIONS_ROOT)/*/android_system.jar)))) \
-    $(TARGET_AVAILABLE_SDK_VERSIONS)
-
-# We don't have prebuilt test_current and core_current SDK yet.
-TARGET_AVAILABLE_SDK_VERSIONS := test_current core_current $(TARGET_AVAILABLE_SDK_VERSIONS)
+# This produces a list like "current/core current/public current/system 4/public"
+TARGET_AVAILABLE_SDK_VERSIONS := $(wildcard $(HISTORICAL_SDK_VERSIONS_ROOT)/*/*/android.jar)
+TARGET_AVAILABLE_SDK_VERSIONS := $(patsubst $(HISTORICAL_SDK_VERSIONS_ROOT)/%/android.jar,%,$(TARGET_AVAILABLE_SDK_VERSIONS))
+# Strips and reorganizes the "public", "core" and "system" subdirs.
+TARGET_AVAILABLE_SDK_VERSIONS := $(subst /public,,$(TARGET_AVAILABLE_SDK_VERSIONS))
+TARGET_AVAILABLE_SDK_VERSIONS := $(patsubst %/core,core_%,$(TARGET_AVAILABLE_SDK_VERSIONS))
+TARGET_AVAILABLE_SDK_VERSIONS := $(patsubst %/system,system_%,$(TARGET_AVAILABLE_SDK_VERSIONS))
+# No prebuilt for test_current.
+TARGET_AVAILABLE_SDK_VERSIONS += test_current
+TARGET_AVAIALBLE_SDK_VERSIONS := $(call numerically_sort,$(TARGET_AVAILABLE_SDK_VERSIONS))
 
 TARGET_SDK_VERSIONS_WITHOUT_JAVA_18_SUPPORT := $(call numbers_less_than,24,$(TARGET_AVAILABLE_SDK_VERSIONS))
 TARGET_SDK_VERSIONS_WITHOUT_JAVA_19_SUPPORT := $(call numbers_less_than,27,$(TARGET_AVAILABLE_SDK_VERSIONS))
 
-INTERNAL_PLATFORM_API_FILE := $(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/public_api.txt
-INTERNAL_PLATFORM_DEX_API_FILE := $(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/public-dex.txt
+ifndef INTERNAL_PLATFORM_PRIVATE_API_FILE
 INTERNAL_PLATFORM_PRIVATE_API_FILE := $(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/private.txt
+endif
+ifndef INTERNAL_PLATFORM_PRIVATE_DEX_API_FILE
 INTERNAL_PLATFORM_PRIVATE_DEX_API_FILE := $(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/private-dex.txt
-INTERNAL_PLATFORM_REMOVED_API_FILE := $(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/removed.txt
-INTERNAL_PLATFORM_REMOVED_DEX_API_FILE := $(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/removed-dex.txt
-INTERNAL_PLATFORM_SYSTEM_API_FILE := $(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/system-api.txt
+endif
+ifndef INTERNAL_PLATFORM_SYSTEM_PRIVATE_API_FILE
 INTERNAL_PLATFORM_SYSTEM_PRIVATE_API_FILE := $(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/system-private.txt
+endif
+ifndef INTERNAL_PLATFORM_SYSTEM_PRIVATE_DEX_API_FILE
 INTERNAL_PLATFORM_SYSTEM_PRIVATE_DEX_API_FILE := $(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/system-private-dex.txt
-INTERNAL_PLATFORM_SYSTEM_REMOVED_API_FILE := $(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/system-removed.txt
-INTERNAL_PLATFORM_SYSTEM_EXACT_API_FILE := $(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/system-exact.txt
-INTERNAL_PLATFORM_TEST_API_FILE := $(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/test-api.txt
-INTERNAL_PLATFORM_TEST_REMOVED_API_FILE := $(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/test-removed.txt
-INTERNAL_PLATFORM_TEST_EXACT_API_FILE := $(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/test-exact.txt
+endif
 
-INTERNAL_PLATFORM_HIDDENAPI_LIGHT_GREYLIST := $(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/hiddenapi-light-greylist.txt
-INTERNAL_PLATFORM_HIDDENAPI_DARK_GREYLIST := $(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/hiddenapi-dark-greylist.txt
-INTERNAL_PLATFORM_HIDDENAPI_BLACKLIST := $(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/hiddenapi-blacklist.txt
+INTERNAL_PLATFORM_HIDDENAPI_PUBLIC_LIST := $(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/hiddenapi-public-list.txt
+INTERNAL_PLATFORM_HIDDENAPI_PRIVATE_LIST := $(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/hiddenapi-private-list.txt
+INTERNAL_PLATFORM_HIDDENAPI_FLAGS := $(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/hiddenapi-flags.csv
+INTERNAL_PLATFORM_HIDDENAPI_GREYLIST_METADATA := $(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/hiddenapi-greylist.csv
 
 # Missing optional uses-libraries so that the platform doesn't create build rules that depend on
 # them. See setup_one_odex.mk.
@@ -1073,6 +1252,8 @@
     bptimage-nodeps \
     vnod vendorimage-nodeps \
     pnod productimage-nodeps \
+    psnod productservicesimage-nodeps \
+    onod odmimage-nodeps \
     systemotherimage-nodeps \
     ramdisk-nodeps \
     bootimage-nodeps \
diff --git a/core/config_sanitizers.mk b/core/config_sanitizers.mk
index d570ccd..7b4015e 100644
--- a/core/config_sanitizers.mk
+++ b/core/config_sanitizers.mk
@@ -5,21 +5,18 @@
 my_sanitize := $(strip $(LOCAL_SANITIZE))
 my_sanitize_diag := $(strip $(LOCAL_SANITIZE_DIAG))
 
-# SANITIZE_HOST is only in effect if the module is already using clang (host
-# modules that haven't set `LOCAL_CLANG := false` and device modules that
-# have set `LOCAL_CLANG := true`.
 my_global_sanitize :=
 my_global_sanitize_diag :=
-ifeq ($(my_clang),true)
-  ifdef LOCAL_IS_HOST_MODULE
+ifdef LOCAL_IS_HOST_MODULE
+  ifneq ($($(my_prefix)OS),windows)
     my_global_sanitize := $(strip $(SANITIZE_HOST))
 
     # SANITIZE_HOST=true is a deprecated way to say SANITIZE_HOST=address.
     my_global_sanitize := $(subst true,address,$(my_global_sanitize))
-  else
-    my_global_sanitize := $(strip $(SANITIZE_TARGET))
-    my_global_sanitize_diag := $(strip $(SANITIZE_TARGET_DIAG))
   endif
+else
+  my_global_sanitize := $(strip $(SANITIZE_TARGET))
+  my_global_sanitize_diag := $(strip $(SANITIZE_TARGET_DIAG))
 endif
 
 # Disable global integer_overflow in excluded paths.
@@ -34,6 +31,16 @@
   endif
 endif
 
+# Global integer sanitization doesn't support static modules.
+ifeq ($(filter SHARED_LIBRARIES EXECUTABLES,$(LOCAL_MODULE_CLASS)),)
+  my_global_sanitize := $(filter-out integer_overflow,$(my_global_sanitize))
+  my_global_sanitize_diag := $(filter-out integer_overflow,$(my_global_sanitize_diag))
+endif
+ifeq ($(LOCAL_FORCE_STATIC_EXECUTABLE),true)
+  my_global_sanitize := $(filter-out integer_overflow,$(my_global_sanitize))
+  my_global_sanitize_diag := $(filter-out integer_overflow,$(my_global_sanitize_diag))
+endif
+
 # Disable global CFI in excluded paths
 ifneq ($(filter cfi, $(my_global_sanitize)),)
   combined_exclude_paths := $(CFI_EXCLUDE_PATHS) \
@@ -134,10 +141,12 @@
   my_sanitize_diag := $(filter-out cfi,$(my_sanitize_diag))
 endif
 
-# Disable CFI for host targets
+# Disable sanitizers which need the UBSan runtime for host targets.
 ifdef LOCAL_IS_HOST_MODULE
   my_sanitize := $(filter-out cfi,$(my_sanitize))
   my_sanitize_diag := $(filter-out cfi,$(my_sanitize_diag))
+  my_sanitize := $(filter-out signed-integer-overflow unsigned-integer-overflow integer_overflow,$(my_sanitize))
+  my_sanitize_diag := $(filter-out signed-integer-overflow unsigned-integer-overflow integer_overflow,$(my_sanitize_diag))
 endif
 
 # Support for local sanitize blacklist paths.
@@ -160,6 +169,25 @@
   my_sanitize := $(filter-out $(my_nosanitize),$(my_sanitize))
 endif
 
+ifneq ($(filter arm x86 x86_64,$(TARGET_$(LOCAL_2ND_ARCH_VAR_PREFIX)ARCH)),)
+  my_sanitize := $(filter-out hwaddress,$(my_sanitize))
+endif
+
+ifneq ($(filter hwaddress,$(my_sanitize)),)
+  my_sanitize := $(filter-out address,$(my_sanitize))
+  my_sanitize := $(filter-out thread,$(my_sanitize))
+  my_sanitize := $(filter-out cfi,$(my_sanitize))
+endif
+
+ifneq ($(filter hwaddress,$(my_sanitize)),)
+  my_shared_libraries += $($(LOCAL_2ND_ARCH_VAR_PREFIX)HWADDRESS_SANITIZER_RUNTIME_LIBRARY)
+  ifneq ($(filter EXECUTABLES NATIVE_TESTS,$(LOCAL_MODULE_CLASS)),)
+    ifeq ($(LOCAL_FORCE_STATIC_EXECUTABLE),true)
+      my_static_libraries := $(my_static_libraries) $($(LOCAL_2ND_ARCH_VAR_PREFIX)HWADDRESS_SANITIZER_STATIC_LIBRARY)
+    endif
+  endif
+endif
+
 # TSAN is not supported on 32-bit architectures. For non-multilib cases, make
 # its use an error. For multilib cases, don't use it for the 32-bit case.
 ifneq ($(filter thread,$(my_sanitize)),)
@@ -180,6 +208,11 @@
   endif
 endif
 
+# Disable Scudo if ASan or TSan is enabled.
+ifneq ($(filter address thread hwaddress,$(my_sanitize)),)
+  my_sanitize := $(filter-out scudo,$(my_sanitize))
+endif
+
 # Undefined symbols can occur if a non-sanitized library links
 # sanitized static libraries. That's OK, because the executable
 # always depends on the ASan runtime library, which defines these
@@ -194,13 +227,6 @@
   endif
 endif
 
-# Sanitizers can only be used with clang.
-ifneq ($(my_clang),true)
-  ifneq ($(my_sanitize),)
-    $(error $(LOCAL_PATH): $(LOCAL_MODULE): Use of sanitizers requires LOCAL_CLANG := true)
-  endif
-endif
-
 ifneq ($(filter default-ub,$(my_sanitize)),)
   my_sanitize := $(CLANG_DEFAULT_UB_CHECKS)
 endif
@@ -214,23 +240,26 @@
 endif
 
 ifneq ($(filter integer_overflow,$(my_sanitize)),)
-  ifneq ($(filter SHARED_LIBRARIES EXECUTABLES,$(LOCAL_MODULE_CLASS)),)
-    ifneq ($(LOCAL_FORCE_STATIC_EXECUTABLE),true)
+  # Respect LOCAL_NOSANITIZE for integer-overflow flags.
+  ifeq ($(filter signed-integer-overflow, $(strip $(LOCAL_NOSANITIZE))),)
+    my_sanitize += signed-integer-overflow
+  endif
+  ifeq ($(filter unsigned-integer-overflow, $(strip $(LOCAL_NOSANITIZE))),)
+    my_sanitize += unsigned-integer-overflow
+  endif
+  my_cflags += $(INTEGER_OVERFLOW_EXTRA_CFLAGS)
 
-      # Respect LOCAL_NOSANITIZE for integer-overflow flags.
-      ifeq ($(filter signed-integer-overflow, $(strip $(LOCAL_NOSANITIZE))),)
-        my_sanitize += signed-integer-overflow
-      endif
-      ifeq ($(filter unsigned-integer-overflow, $(strip $(LOCAL_NOSANITIZE))),)
-        my_sanitize += unsigned-integer-overflow
-      endif
-      my_cflags += $(INTEGER_OVERFLOW_EXTRA_CFLAGS)
-
-      # Check for diagnostics mode (on by default).
-      ifneq ($(filter integer_overflow,$(my_sanitize_diag)),)
+  # Check for diagnostics mode.
+  ifneq ($(filter integer_overflow,$(my_sanitize_diag)),)
+    ifneq ($(filter SHARED_LIBRARIES EXECUTABLES,$(LOCAL_MODULE_CLASS)),)
+      ifneq ($(LOCAL_FORCE_STATIC_EXECUTABLE),true)
         my_sanitize_diag += signed-integer-overflow
         my_sanitize_diag += unsigned-integer-overflow
+      else
+        $(call pretty-error,Make cannot apply integer overflow diagnostics to static binary.)
       endif
+    else
+      $(call pretty-error,Make cannot apply integer overflow diagnostics to static library.)
     endif
   endif
   my_sanitize := $(filter-out integer_overflow,$(my_sanitize))
@@ -245,6 +274,7 @@
 ifneq ($(my_sanitize),)
   fsanitize_arg := $(subst $(space),$(comma),$(my_sanitize))
   my_cflags += -fsanitize=$(fsanitize_arg)
+  my_asflags += -fsanitize=$(fsanitize_arg)
 
   ifdef LOCAL_IS_HOST_MODULE
     my_cflags += -fno-sanitize-recover=all
@@ -265,6 +295,7 @@
   # entire module.
   LOCAL_ARM_MODE := thumb
   my_cflags += $(CFI_EXTRA_CFLAGS)
+  my_asflags += $(CFI_EXTRA_ASFLAGS)
   # Only append the default visibility flag if -fvisibility has not already been
   # set to hidden.
   ifeq ($(filter -fvisibility=hidden,$(LOCAL_CFLAGS)),)
@@ -326,6 +357,11 @@
   endif
 endif
 
+# If local module needs HWASAN, add compiler flags.
+ifneq ($(filter hwaddress,$(my_sanitize)),)
+  my_cflags += $(HWADDRESS_SANITIZER_CONFIG_EXTRA_CFLAGS)
+endif
+
 # Use minimal diagnostics when integer overflow is enabled; never do it for HOST or AUX modules
 ifeq ($(LOCAL_IS_HOST_MODULE)$(LOCAL_IS_AUX_MODULE),)
   # Pre-emptively add UBSAN minimal runtime incase a static library dependency requires it
@@ -336,9 +372,9 @@
     endif
   endif
   ifneq ($(filter unsigned-integer-overflow signed-integer-overflow integer,$(my_sanitize)),)
-    ifeq ($(filter unsigned-integer-overflow signed-integer overflow integer,$(my_sanitize_diag)),)
+    ifeq ($(filter unsigned-integer-overflow signed-integer-overflow integer,$(my_sanitize_diag)),)
       ifeq ($(filter cfi,$(my_sanitize_diag)),)
-        ifeq ($(filter address,$(my_sanitize)),)
+        ifeq ($(filter address hwaddress,$(my_sanitize)),)
           my_cflags += -fsanitize-minimal-runtime
           my_cflags += -fno-sanitize-trap=integer
           my_cflags += -fno-sanitize-recover=integer
@@ -348,6 +384,18 @@
   endif
 endif
 
+# For Scudo, we opt for the minimal runtime, unless some diagnostics are enabled.
+ifneq ($(filter scudo,$(my_sanitize)),)
+  ifeq ($(filter unsigned-integer-overflow signed-integer-overflow integer cfi,$(my_sanitize_diag)),)
+    my_cflags += -fsanitize-minimal-runtime
+  endif
+  ifneq ($(filter -fsanitize-minimal-runtime,$(my_cflags)),)
+    my_shared_libraries += $($(LOCAL_2ND_ARCH_VAR_PREFIX)SCUDO_MINIMAL_RUNTIME_LIBRARY)
+  else
+    my_shared_libraries += $($(LOCAL_2ND_ARCH_VAR_PREFIX)SCUDO_RUNTIME_LIBRARY)
+  endif
+endif
+
 ifneq ($(strip $(LOCAL_SANITIZE_RECOVER)),)
   recover_arg := $(subst $(space),$(comma),$(LOCAL_SANITIZE_RECOVER)),
   my_cflags += -fsanitize-recover=$(recover_arg)
@@ -361,9 +409,20 @@
     notrap_arg := $(subst $(space),$(comma),$(my_sanitize_diag)),
     my_cflags += -fno-sanitize-trap=$(notrap_arg)
     # Diagnostic requires a runtime library, unless ASan or TSan are also enabled.
-    ifeq ($(filter address thread,$(my_sanitize)),)
+    ifeq ($(filter address thread scudo hwaddress,$(my_sanitize)),)
       # Does not have to be the first DT_NEEDED unlike ASan.
       my_shared_libraries += $($(LOCAL_2ND_ARCH_VAR_PREFIX)UBSAN_RUNTIME_LIBRARY)
     endif
   endif
 endif
+
+# http://b/119329758, Android core does not boot up with this sanitizer yet.
+# Previously sanitized modules might not pass new implicit-integer-sign-change check.
+# Disable this check unless it has been explicitly specified.
+ifneq ($(findstring fsanitize,$(my_cflags)),)
+  ifneq ($(findstring integer,$(my_cflags)),)
+    ifeq ($(findstring sanitize=implicit-integer-sign-change,$(my_cflags)),)
+      my_cflags += -fno-sanitize=implicit-integer-sign-change
+    endif
+  endif
+endif
diff --git a/core/configure_module_stem.mk b/core/configure_module_stem.mk
index 48b7787..30df8ea 100644
--- a/core/configure_module_stem.mk
+++ b/core/configure_module_stem.mk
@@ -1,20 +1,26 @@
 my_multilib_stem := $(LOCAL_MODULE_STEM_$(if $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)IS_64_BIT),64,32))
 ifdef my_multilib_stem
   my_module_stem := $(my_multilib_stem)
+  $(call verify-module-stem,my_multilib_stem)
 else ifdef LOCAL_MODULE_STEM
   my_module_stem := $(LOCAL_MODULE_STEM)
+  $(call verify-module-stem,LOCAL_MODULE_STEM)
 else
   my_module_stem := $(LOCAL_MODULE)
 endif
 
 ifdef LOCAL_BUILT_MODULE_STEM
   my_built_module_stem := $(LOCAL_BUILT_MODULE_STEM)
+  $(call verify-module-stem,LOCAL_BUILT_MODULE_STEM)
 else
   my_built_module_stem := $(my_module_stem)$(LOCAL_MODULE_SUFFIX)
+  $(call verify-module-stem,LOCAL_MODULE_SUFFIX)
 endif
 
 ifdef LOCAL_INSTALLED_MODULE_STEM
   my_installed_module_stem := $(LOCAL_INSTALLED_MODULE_STEM)
+  $(call verify-module-stem,LOCAL_INSTALLED_MODULE_STEM)
 else
   my_installed_module_stem := $(my_module_stem)$(LOCAL_MODULE_SUFFIX)
+  $(call verify-module-stem,LOCAL_MODULE_SUFFIX)
 endif
diff --git a/core/cxx_stl_setup.mk b/core/cxx_stl_setup.mk
index 5171b8a..25fd642 100644
--- a/core/cxx_stl_setup.mk
+++ b/core/cxx_stl_setup.mk
@@ -15,8 +15,7 @@
             endif
 
             ifeq ($($(my_prefix)OS),windows)
-                # libc++ is not supported on mingw.
-                my_cxx_stl := libstdc++
+                my_cxx_stl := libc++_static
             endif
         endif
     else
@@ -38,9 +37,9 @@
     endif
     ifdef LOCAL_IS_HOST_MODULE
         ifeq ($($(my_prefix)OS),windows)
-            ifneq ($(filter $(my_cxx_stl),libc++ libc++_static),)
-                # libc++ is not supported on mingw.
-                my_cxx_stl := libstdc++
+            ifneq ($(filter $(my_cxx_stl),libc++),)
+                # only libc++_static is supported on mingw.
+                my_cxx_stl := libc++_static
             endif
         endif
     endif
@@ -52,8 +51,9 @@
 darwin_dynamic_gcclibs := -lc -lSystem
 darwin_static_gcclibs := NO_STATIC_HOST_BINARIES_ON_DARWIN
 windows_dynamic_gcclibs := \
-    -lmsvcr110 -lmingw32 -lgcc -lmoldname -lmingwex -lmsvcrt -ladvapi32 \
-    -lshell32 -luser32 -lkernel32 -lmingw32 -lgcc -lmoldname -lmingwex -lmsvcrt
+    -Wl,--start-group -lmingw32 -lgcc -lgcc_eh -lmoldname -lmingwex \
+    -lmsvcrt -lucrt -lpthread -ladvapi32 -lshell32 -luser32 -lkernel32 -lpsapi \
+    -Wl,--end-group
 windows_static_gcclibs := NO_STATIC_HOST_BINARIES_ON_WINDOWS
 
 my_link_type := dynamic
@@ -100,6 +100,20 @@
         my_cppflags += -nostdinc++
         my_ldflags += -nodefaultlibs
         my_cxx_ldlibs += $($($(my_prefix)OS)_$(my_link_type)_gcclibs)
+
+        ifeq ($($(my_prefix)OS),windows)
+            # Use SjLj exceptions for 32-bit.  libgcc_eh implements SjLj
+            # exception model for 32-bit.
+            ifeq (x86,$($(my_prefix)$(LOCAL_2ND_ARCH_VAR_PREFIX)ARCH))
+                my_cppflags += -fsjlj-exceptions
+            endif
+            # Disable visibility annotations since we're using libc++ static
+            # library.
+            my_cppflags += -D_LIBCPP_DISABLE_VISIBILITY_ANNOTATIONS
+            my_cppflags += -D_LIBCXXABI_DISABLE_VISIBILITY_ANNOTATIONS
+            # Use Win32 threads in libc++.
+            my_cppflags += -D_LIBCPP_HAS_THREAD_API_WIN32
+        endif
     else
         ifeq (arm,$($(my_prefix)$(LOCAL_2ND_ARCH_VAR_PREFIX)ARCH))
             my_static_libraries += libunwind_llvm
@@ -113,11 +127,7 @@
 else ifeq ($(my_cxx_stl),ndk)
     # Using an NDK STL. Handled in binary.mk.
 else ifeq ($(my_cxx_stl),libstdc++)
-    ifndef LOCAL_IS_HOST_MODULE
-        $(error $(LOCAL_PATH): $(LOCAL_MODULE): libstdc++ is not supported for device modules)
-    else ifneq ($($(my_prefix)OS),windows)
-        $(error $(LOCAL_PATH): $(LOCAL_MODULE): libstdc++ is not supported on $($(my_prefix)OS))
-    endif
+    $(error $(LOCAL_PATH): $(LOCAL_MODULE): libstdc++ is not supported)
 else ifeq ($(my_cxx_stl),none)
     ifdef LOCAL_IS_HOST_MODULE
         my_cppflags += -nostdinc++
diff --git a/core/definitions.mk b/core/definitions.mk
index 599ab49..50c26d3 100644
--- a/core/definitions.mk
+++ b/core/definitions.mk
@@ -99,6 +99,12 @@
 # All installed initrc files
 ALL_INIT_RC_INSTALLED_PAIRS :=
 
+# All installed vintf manifest fragments for a partition at
+ALL_VINTF_MANIFEST_FRAGMENTS_LIST:=
+
+# All tests that should be skipped in presubmit check.
+ALL_DISABLED_PRESUBMIT_TESTS :=
+
 ###########################################################
 ## Debugging; prints a variable list to stdout
 ###########################################################
@@ -471,8 +477,8 @@
 ###########################################################
 ## Find test data in a form required by LOCAL_TEST_DATA
 ## $(1): the base dir, relative to the root of the source tree.
-## $(3): the file name pattern to be passed to find as "-name"
-## $(2): a list of subdirs of the base dir
+## $(2): the file name pattern to be passed to find as "-name"
+## $(3): a list of subdirs of the base dir
 ###########################################################
 
 define find-test-data-in-subdirs
@@ -651,7 +657,8 @@
 ###########################################################
 
 define module-stubs-files
-$(foreach module,$(1),$(ALL_MODULES.$(module).STUBS))
+$(foreach module,$(1),$(if $(filter $(module),$(JAVA_SDK_LIBRARIES)),\
+$(call java-lib-files,$(module).stubs),$(ALL_MODULES.$(module).STUBS)))
 endef
 
 ###########################################################
@@ -725,77 +732,11 @@
 endef
 endif
 
-###########################################################
-## Returns true if $(1) and $(2) are equal.  Returns
-## the empty string if they are not equal.
-###########################################################
-define streq
-$(strip $(if $(strip $(1)),\
-  $(if $(strip $(2)),\
-    $(if $(filter-out __,_$(subst $(strip $(1)),,$(strip $(2)))$(subst $(strip $(2)),,$(strip $(1)))_),,true), \
-    ),\
-  $(if $(strip $(2)),\
-    ,\
-    true)\
- ))
-endef
-
-###########################################################
-## Convert "a b c" into "a:b:c"
-###########################################################
-define normalize-path-list
-$(subst $(space),:,$(strip $(1)))
-endef
-
-###########################################################
-## Convert "a b c" into "a,b,c"
-###########################################################
-define normalize-comma-list
-$(subst $(space),$(comma),$(strip $(1)))
-endef
-
-###########################################################
-## Read the word out of a colon-separated list of words.
-## This has the same behavior as the built-in function
-## $(word n,str).
-##
-## The individual words may not contain spaces.
-##
-## $(1): 1 based index
-## $(2): value of the form a:b:c...
-###########################################################
-
-define word-colon
-$(word $(1),$(subst :,$(space),$(2)))
-endef
-
-###########################################################
-## Convert "a=b c= d e = f" into "a=b c=d e=f"
-##
-## $(1): list to collapse
-## $(2): if set, separator word; usually "=", ":", or ":="
-##       Defaults to "=" if not set.
-###########################################################
-
-define collapse-pairs
-$(eval _cpSEP := $(strip $(if $(2),$(2),=)))\
-$(subst $(space)$(_cpSEP)$(space),$(_cpSEP),$(strip \
-    $(subst $(_cpSEP), $(_cpSEP) ,$(1))))
-endef
-
-###########################################################
-## Given a list of pairs, if multiple pairs have the same
-## first components, keep only the first pair.
-##
-## $(1): list of pairs
-## $(2): the separator word, such as ":", "=", etc.
-define uniq-pairs-by-first-component
-$(eval _upbfc_fc_set :=)\
-$(strip $(foreach w,$(1), $(eval _first := $(word 1,$(subst $(2),$(space),$(w))))\
-    $(if $(filter $(_upbfc_fc_set),$(_first)),,$(w)\
-        $(eval _upbfc_fc_set += $(_first)))))\
-$(eval _upbfc_fc_set :=)\
-$(eval _first:=)
+# Get the exported-sdk-libs files which collectively give you the list of exported java sdk
+# lib names that are (transitively) exported from the given set of java libs
+# $(1): library name list
+define exported-sdk-libs-files
+$(foreach lib,$(1),$(call intermediates-dir-for,JAVA_LIBRARIES,$(lib),,COMMON)/exported-sdk-libs)
 endef
 
 ###########################################################
@@ -856,73 +797,22 @@
 # $(1): path (and optionally line) information
 # $(2): message to print
 define echo-warning
-echo -e "$(ESC_BOLD)$(1): $(ESC_WARNING)warning:$(ESC_RESET)$(ESC_BOLD)" $(2) "$(ESC_RESET)" >&2
+echo -e "$(ESC_BOLD)$(1): $(ESC_WARNING)warning:$(ESC_RESET)$(ESC_BOLD)" '$(subst ','\'',$(2))'  "$(ESC_RESET)" >&2
 endef
 
 # $(1): path (and optionally line) information
 # $(2): message to print
 define echo-error
-echo -e "$(ESC_BOLD)$(1): $(ESC_ERROR)error:$(ESC_RESET)$(ESC_BOLD)" $(2) "$(ESC_RESET)" >&2
-endef
-
-# $(1): message to print
-define pretty-warning
-$(shell $(call echo-warning,$(LOCAL_MODULE_MAKEFILE),$(LOCAL_MODULE): $(1)))
-endef
-
-# $(1): message to print
-define pretty-error
-$(shell $(call echo-error,$(LOCAL_MODULE_MAKEFILE),$(LOCAL_MODULE): $(1)))
-$(error done)
+echo -e "$(ESC_BOLD)$(1): $(ESC_ERROR)error:$(ESC_RESET)$(ESC_BOLD)" '$(subst ','\'',$(2))'  "$(ESC_RESET)" >&2
 endef
 
 ###########################################################
-## Package filtering
+## Legacy showcommands compatibility
 ###########################################################
 
-# Given a list of installed modules (short or long names)
-# return a list of the packages (yes, .apk packages, not
-# modules in general) that are overridden by this list and,
-# therefore, should not be installed.
-# $(1): mixed list of installed modules
-# TODO: This is fragile; find a reliable way to get this information.
-define _get-package-overrides
- $(eval ### Discard any words containing slashes, unless they end in .apk, \
-        ### in which case trim off the directory component and the suffix. \
-        ### If there are no slashes, keep the entire word.)
- $(eval _gpo_names := $(subst /,@@@ @@@,$(1)))
- $(eval _gpo_names := \
-     $(filter %.apk,$(_gpo_names)) \
-     $(filter-out %@@@ @@@%,$(_gpo_names)))
- $(eval _gpo_names := $(patsubst %.apk,%,$(_gpo_names)))
- $(eval _gpo_names := $(patsubst @@@%,%,$(_gpo_names)))
-
- $(eval ### Remove any remaining words that contain dots.)
- $(eval _gpo_names := $(subst .,@@@ @@@,$(_gpo_names)))
- $(eval _gpo_names := $(filter-out %@@@ @@@%,$(_gpo_names)))
-
- $(eval ### Now we have a list of any words that could possibly refer to \
-        ### packages, although there may be words that do not.  Only \
-        ### real packages will be present under PACKAGES.*, though.)
- $(foreach _gpo_name,$(_gpo_names),$(PACKAGES.$(_gpo_name).OVERRIDES))
-endef
-
-define get-package-overrides
-$(sort $(strip $(call _get-package-overrides,$(1))))
-endef
-
-###########################################################
-## Output the command lines, or not
-###########################################################
-
-ifeq ($(strip $(SHOW_COMMANDS)),)
 define pretty
 @echo $1
 endef
-else
-define pretty
-endef
-endif
 
 ###########################################################
 ## Commands for including the dependency files the compiler generates
@@ -1050,7 +940,7 @@
 	-Wl,-rpath,\$$ORIGIN/../lib \
 	$(dir $@)/$(notdir $(<:.bc=.o)) \
 	$(RS_PREBUILT_COMPILER_RT) \
-	-o $@ $(TARGET_GLOBAL_LDFLAGS) -Wl,--hash-style=sysv \
+	-o $@ $(CLANG_TARGET_GLOBAL_LDFLAGS) -Wl,--hash-style=sysv \
 	-L $(SOONG_OUT_DIR)/ndk/platforms/android-$(PRIVATE_SDK_VERSION)/arch-$(TARGET_ARCH)/usr/lib64 \
 	-L $(SOONG_OUT_DIR)/ndk/platforms/android-$(PRIVATE_SDK_VERSION)/arch-$(TARGET_ARCH)/usr/lib \
 	$(call intermediates-dir-for,SHARED_LIBRARIES,libRSSupport)/libRSSupport.so \
@@ -1095,7 +985,7 @@
 @mkdir -p $(dir $@)
 @mkdir -p $(PRIVATE_HEADER_OUTPUT_DIR)
 @echo "Generating C++ from AIDL: $(PRIVATE_MODULE) <= $<"
-$(hide) $(AIDL_CPP) -d$(basename $@).aidl.d -ninja $(PRIVATE_AIDL_FLAGS) \
+$(hide) $(AIDL_CPP) -d$(basename $@).aidl.d --ninja $(PRIVATE_AIDL_FLAGS) \
     $< $(PRIVATE_HEADER_OUTPUT_DIR) $@
 endef
 
@@ -1164,7 +1054,6 @@
 ###########################################################
 ## Commands for running protoc to compile .proto into .java
 ###########################################################
-# PATH contains HOST_OUT_EXECUTABLES to allow protoc-gen-* plugins
 
 define transform-proto-to-java
 @mkdir -p $(dir $@)
@@ -1172,7 +1061,6 @@
 @rm -rf $(PRIVATE_PROTO_JAVA_OUTPUT_DIR)
 @mkdir -p $(PRIVATE_PROTO_JAVA_OUTPUT_DIR)
 $(hide) for f in $(PRIVATE_PROTO_SRC_FILES); do \
-        PATH=$$PATH:$(HOST_OUT_EXECUTABLES) \
         $(PROTOC) \
         $(addprefix --proto_path=, $(PRIVATE_PROTO_INCLUDES)) \
         $(PRIVATE_PROTO_JAVA_OUTPUT_OPTION)="$(PRIVATE_PROTO_JAVA_OUTPUT_PARAMS):$(PRIVATE_PROTO_JAVA_OUTPUT_DIR)" \
@@ -1185,13 +1073,11 @@
 ######################################################################
 ## Commands for running protoc to compile .proto into .pb.cc (or.pb.c) and .pb.h
 ######################################################################
-# PATH contains HOST_OUT_EXECUTABLES to allow protoc-gen-* plugins
 
 define transform-proto-to-cc
 @echo "Protoc: $@ <= $<"
 @mkdir -p $(dir $@)
 $(hide) \
-	PATH=$$PATH:$(HOST_OUT_EXECUTABLES) \
 	$(PROTOC) \
 	$(addprefix --proto_path=, $(PRIVATE_PROTO_INCLUDES)) \
 	$(PRIVATE_PROTOC_FLAGS) \
@@ -1236,10 +1122,16 @@
 	$(PRIVATE_CPPFLAGS_NO_OVERRIDE)
 endef
 
+# PATH_TO_CLANG_TIDY_SHELL is defined in build/soong
+define call-clang-tidy
+CLANG_TIDY=$(PATH_TO_CLANG_TIDY) \
+  $(PATH_TO_CLANG_TIDY_SHELL) \
+  $(PRIVATE_TIDY_FLAGS) \
+  -checks=$(PRIVATE_TIDY_CHECKS)
+endef
+
 define clang-tidy-cpp
-$(hide) $(PATH_TO_CLANG_TIDY) $(PRIVATE_TIDY_FLAGS) \
-  -checks=$(PRIVATE_TIDY_CHECKS) \
-  $< -- $(transform-cpp-to-o-compiler-args)
+$(hide) $(call-clang-tidy) $< -- $(transform-cpp-to-o-compiler-args)
 endef
 
 ifneq (,$(filter 1 true,$(WITH_TIDY_ONLY)))
@@ -1285,9 +1177,7 @@
 endef
 
 define clang-tidy-c
-$(hide) $(PATH_TO_CLANG_TIDY) $(PRIVATE_TIDY_FLAGS) \
-  -checks=$(PRIVATE_TIDY_CHECKS) \
-  $< -- $(transform-c-to-o-compiler-args)
+$(hide) $(call-clang-tidy) $< -- $(transform-c-to-o-compiler-args)
 endef
 
 ifneq (,$(filter 1 true,$(WITH_TIDY_ONLY)))
@@ -1355,9 +1245,7 @@
 endef
 
 define clang-tidy-host-cpp
-$(hide) $(PATH_TO_CLANG_TIDY) $(PRIVATE_TIDY_FLAGS) \
-  -checks=$(PRIVATE_TIDY_CHECKS) \
-  $< -- $(transform-host-cpp-to-o-compiler-args)
+$(hide) $(call-clang-tidy) $< -- $(transform-host-cpp-to-o-compiler-args)
 endef
 
 ifneq (,$(filter 1 true,$(WITH_TIDY_ONLY)))
@@ -1407,9 +1295,7 @@
 endef
 
 define clang-tidy-host-c
-$(hide) $(PATH_TO_CLANG_TIDY) $(PRIVATE_TIDY_FLAGS) \
-  -checks=$(PRIVATE_TIDY_CHECKS) \
-  $< -- $(transform-host-c-to-o-compiler-args)
+$(hide) $(call-clang-tidy) $< -- $(transform-host-c-to-o-compiler-args)
 endef
 
 ifneq (,$(filter 1 true,$(WITH_TIDY_ONLY)))
@@ -1754,7 +1640,6 @@
 ifneq ($(HOST_CUSTOM_LD_COMMAND),true)
 define transform-host-o-to-shared-lib-inner
 $(hide) $(PRIVATE_CXX) \
-	-Wl,-rpath-link=$($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)OUT_INTERMEDIATE_LIBRARIES) \
 	-Wl,-rpath,\$$ORIGIN/../$(notdir $($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)OUT_SHARED_LIBRARIES)) \
 	-Wl,-rpath,\$$ORIGIN/$(notdir $($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)OUT_SHARED_LIBRARIES)) \
 	-shared -Wl,-soname,$(notdir $@) \
@@ -1798,7 +1683,7 @@
 $(hide) $(PRIVATE_CXX) \
 	-nostdlib -Wl,-soname,$(notdir $@) \
 	-Wl,--gc-sections \
-	$(if $(filter true,$(PRIVATE_CLANG)),-shared,-Wl$(comma)-shared) \
+	-shared \
 	$(PRIVATE_TARGET_CRTBEGIN_SO_O) \
 	$(PRIVATE_ALL_OBJECTS) \
 	-Wl,--whole-archive \
@@ -1808,6 +1693,7 @@
 	$(PRIVATE_ALL_STATIC_LIBRARIES) \
 	$(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--end-group) \
 	$(if $(filter true,$(NATIVE_COVERAGE)),$(PRIVATE_TARGET_COVERAGE_LIB)) \
+	$(PRIVATE_TARGET_LIBCRT_BUILTINS) \
 	$(PRIVATE_TARGET_LIBATOMIC) \
 	$(PRIVATE_TARGET_LIBGCC) \
 	$(PRIVATE_TARGET_GLOBAL_LDFLAGS) \
@@ -1825,61 +1711,6 @@
 endef
 
 ###########################################################
-## Commands for filtering a target executable or library
-###########################################################
-
-ifneq ($(TARGET_BUILD_VARIANT),user)
-  TARGET_STRIP_EXTRA = && $(PRIVATE_OBJCOPY) --add-gnu-debuglink=$< $@
-  TARGET_STRIP_KEEP_SYMBOLS_EXTRA = --add-gnu-debuglink=$<
-endif
-
-define transform-to-stripped
-@echo "$($(PRIVATE_PREFIX)DISPLAY) Strip: $(PRIVATE_MODULE) ($@)"
-@mkdir -p $(dir $@)
-$(hide) $(PRIVATE_STRIP) --strip-all $< -o $@ \
-  $(if $(PRIVATE_NO_DEBUGLINK),,$(TARGET_STRIP_EXTRA))
-endef
-
-define transform-to-stripped-keep-mini-debug-info
-@echo "$($(PRIVATE_PREFIX)DISPLAY) Strip (mini debug info): $(PRIVATE_MODULE) ($@)"
-@mkdir -p $(dir $@)
-$(hide) rm -f $@ $@.dynsyms $@.funcsyms $@.keep_symbols $@.debug $@.mini_debuginfo.xz
-if $(PRIVATE_STRIP) --strip-all -R .comment $< -o $@; then \
-  $(PRIVATE_OBJCOPY) --only-keep-debug $< $@.debug && \
-  $(PRIVATE_NM) -D $< --format=posix --defined-only | awk '{ print $$1 }' | sort >$@.dynsyms && \
-  $(PRIVATE_NM) $< --format=posix --defined-only | awk '{ if ($$2 == "T" || $$2 == "t" || $$2 == "D") print $$1 }' | sort >$@.funcsyms && \
-  comm -13 $@.dynsyms $@.funcsyms >$@.keep_symbols && \
-  echo >>$@.keep_symbols && \
-  $(PRIVATE_OBJCOPY) --rename-section .debug_frame=saved_debug_frame $@.debug $@.mini_debuginfo && \
-  $(PRIVATE_OBJCOPY) -S --remove-section .gdb_index --remove-section .comment --keep-symbols=$@.keep_symbols $@.mini_debuginfo && \
-  $(PRIVATE_OBJCOPY) --rename-section saved_debug_frame=.debug_frame $@.mini_debuginfo && \
-  rm -f $@.mini_debuginfo.xz && \
-  xz $@.mini_debuginfo && \
-  $(PRIVATE_OBJCOPY) --add-section .gnu_debugdata=$@.mini_debuginfo.xz $@; \
-else \
-  cp -f $< $@; \
-fi
-endef
-
-define transform-to-stripped-keep-symbols
-@echo "$($(PRIVATE_PREFIX)DISPLAY) Strip (keep symbols): $(PRIVATE_MODULE) ($@)"
-@mkdir -p $(dir $@)
-$(hide) $(PRIVATE_OBJCOPY) \
-    `$(PRIVATE_READELF) -S $< | awk '/.debug_/ {print "-R " $$2}' | xargs` \
-    $(TARGET_STRIP_KEEP_SYMBOLS_EXTRA) $< $@
-endef
-
-###########################################################
-## Commands for packing a target executable or library
-###########################################################
-
-define pack-elf-relocations
-@echo "$($(PRIVATE_PREFIX)DISPLAY) Pack Relocations: $(PRIVATE_MODULE) ($@)"
-$(copy-file-to-target)
-$(hide) $(RELOCATION_PACKER) $@
-endef
-
-###########################################################
 ## Commands for running gcc to link an executable
 ###########################################################
 
@@ -1889,7 +1720,6 @@
 	-Wl,-dynamic-linker,$(PRIVATE_LINKER) \
 	-Wl,--gc-sections \
 	-Wl,-z,nocopyreloc \
-	-Wl,-rpath-link=$(PRIVATE_TARGET_OUT_INTERMEDIATE_LIBRARIES) \
 	$(PRIVATE_TARGET_CRTBEGIN_DYNAMIC_O) \
 	$(PRIVATE_ALL_OBJECTS) \
 	-Wl,--whole-archive \
@@ -1899,6 +1729,7 @@
 	$(PRIVATE_ALL_STATIC_LIBRARIES) \
 	$(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--end-group) \
 	$(if $(filter true,$(NATIVE_COVERAGE)),$(PRIVATE_TARGET_COVERAGE_LIB)) \
+	$(PRIVATE_TARGET_LIBCRT_BUILTINS) \
 	$(PRIVATE_TARGET_LIBATOMIC) \
 	$(PRIVATE_TARGET_LIBGCC) \
 	$(PRIVATE_TARGET_GLOBAL_LDFLAGS) \
@@ -1939,13 +1770,14 @@
 	-Wl,--whole-archive \
 	$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES) \
 	-Wl,--no-whole-archive \
-	$(filter-out %libcompiler_rt.a,$(filter-out %libc_nomalloc.a,$(filter-out %libc.a,$(PRIVATE_ALL_STATIC_LIBRARIES)))) \
+	$(filter-out %libcompiler_rt.hwasan.a %libc_nomalloc.hwasan.a %libc.hwasan.a %libcompiler_rt.a %libc_nomalloc.a %libc.a,$(PRIVATE_ALL_STATIC_LIBRARIES)) \
 	-Wl,--start-group \
-	$(filter %libc.a,$(PRIVATE_ALL_STATIC_LIBRARIES)) \
-	$(filter %libc_nomalloc.a,$(PRIVATE_ALL_STATIC_LIBRARIES)) \
+	$(filter %libc.a %libc.hwasan.a,$(PRIVATE_ALL_STATIC_LIBRARIES)) \
+	$(filter %libc_nomalloc.a %libc_nomalloc.hwasan.a,$(PRIVATE_ALL_STATIC_LIBRARIES)) \
 	$(if $(filter true,$(NATIVE_COVERAGE)),$(PRIVATE_TARGET_COVERAGE_LIB)) \
 	$(PRIVATE_TARGET_LIBATOMIC) \
-	$(filter %libcompiler_rt.a,$(PRIVATE_ALL_STATIC_LIBRARIES)) \
+	$(filter %libcompiler_rt.a %libcompiler_rt.hwasan.a,$(PRIVATE_ALL_STATIC_LIBRARIES)) \
+	$(PRIVATE_TARGET_LIBCRT_BUILTINS) \
 	$(PRIVATE_TARGET_LIBGCC) \
 	-Wl,--end-group \
 	$(PRIVATE_TARGET_CRTEND_O)
@@ -1961,15 +1793,6 @@
 ###########################################################
 ## Commands for running gcc to link a host executable
 ###########################################################
-ifdef BUILD_HOST_static
-HOST_FPIE_FLAGS :=
-else
-HOST_FPIE_FLAGS := -pie
-# Force the correct entry point to workaround a bug in binutils that manifests with -pie
-ifeq ($(HOST_CROSS_OS),windows)
-HOST_CROSS_FPIE_FLAGS += -Wl,-e_mainCRTStartup
-endif
-endif
 
 ifneq ($(HOST_CUSTOM_LD_COMMAND),true)
 define transform-host-o-to-executable-inner
@@ -1984,7 +1807,6 @@
 	$(if $(filter true,$(NATIVE_COVERAGE)),-lgcov) \
 	$(if $(filter true,$(NATIVE_COVERAGE)),$(PRIVATE_HOST_LIBPROFILE_RT)) \
 	$(PRIVATE_ALL_SHARED_LIBRARIES) \
-	-Wl,-rpath-link=$($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)OUT_INTERMEDIATE_LIBRARIES) \
 	$(foreach path,$(PRIVATE_RPATHS), \
 	  -Wl,-rpath,\$$ORIGIN/$(path)) \
 	$(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \
@@ -2108,7 +1930,9 @@
 # $(2): the base dir of the output file path
 # Returns: the compiled output file path
 define aapt2-compiled-resource-out-file
-$(eval _p_w := $(strip $(subst /,$(space),$(dir $(1)))))$(2)/$(subst $(space),/,$(_p_w))_$(if $(filter values%,$(lastword $(_p_w))),$(patsubst %.xml,%.arsc,$(notdir $(1))),$(notdir $(1))).flat
+$(strip \
+  $(eval _p_w := $(strip $(subst /,$(space),$(dir $(call clean-path,$(1))))))
+  $(2)/$(subst $(space),/,$(_p_w))_$(if $(filter values%,$(lastword $(_p_w))),$(patsubst %.xml,%.arsc,$(notdir $(1))),$(notdir $(1))).flat)
 endef
 
 define aapt2-link
@@ -2141,6 +1965,19 @@
 $(EXTRACT_JAR_PACKAGES) -i $(PRIVATE_SRCJAR) -o $(PRIVATE_AAPT_EXTRA_PACKAGES) --prefix '--extra-packages '
 endef
 
+define _create-default-manifest-file
+$(1):
+	rm -f $1
+	(echo '<manifest xmlns:android="http://schemas.android.com/apk/res/android" package="missing.manifest">' && \
+	 echo '    <uses-sdk android:minSdkVersion="$(2)" />' && \
+	 echo '</manifest>' ) > $1
+endef
+
+define create-default-manifest-file
+  $(eval $(call _create-default-manifest-file,$(1),$(2)))
+endef
+
+
 ###########################################################
 xlint_unchecked := -Xlint:unchecked
 
@@ -2295,12 +2132,9 @@
     $(JAVA) -jar $(TURBINE) \
     --output $@.premerged --temp_dir $(dir $@)/classes-turbine \
     --sources \@$(PRIVATE_JAVA_SOURCE_LIST) --source_jars $(PRIVATE_SRCJARS) \
-    --javacopts $(PRIVATE_JAVACFLAGS) $(COMMON_JDK_FLAGS) \
-    $(addprefix --bootclasspath ,$(strip \
-         $(call normalize-path-list,$(PRIVATE_BOOTCLASSPATH)) \
-         $(PRIVATE_EMPTY_BOOTCLASSPATH))) \
-    $(addprefix --classpath ,$(strip \
-        $(call normalize-path-list,$(PRIVATE_ALL_JAVA_HEADER_LIBRARIES)))) \
+    --javacopts $(PRIVATE_JAVACFLAGS) $(COMMON_JDK_FLAGS) -- \
+    $(addprefix --bootclasspath ,$(strip $(PRIVATE_BOOTCLASSPATH))) \
+    $(addprefix --classpath ,$(strip $(PRIVATE_ALL_JAVA_HEADER_LIBRARIES))) \
     || ( rm -rf $(dir $@)/classes-turbine ; exit 41 ) && \
     $(MERGE_ZIPS) -j --ignore-duplicates -stripDir META-INF $@.tmp $@.premerged $(call reverse-list,$(PRIVATE_STATIC_JAVA_HEADER_LIBRARIES)) ; \
 else \
@@ -2358,52 +2192,15 @@
 $(if $(filter $(1),$(PLATFORM_VERSION_CODENAME)),10000,$(1))
 endef
 
-# --add-opens is required because desugar reflects via java.lang.invoke.MethodHandles.Lookup
-define desugar-classes-jar
-@echo Desugar: $@
-@mkdir -p $(dir $@)
-$(hide) rm -f $@ $@.tmp
-@rm -rf $(dir $@)/desugar_dumped_classes
-@mkdir $(dir $@)/desugar_dumped_classes
-$(hide) $(JAVA) \
-    $(if $(USE_OPENJDK9),--add-opens java.base/java.lang.invoke=ALL-UNNAMED,) \
-    -Djdk.internal.lambda.dumpProxyClasses=$(abspath $(dir $@))/desugar_dumped_classes \
-    -jar $(DESUGAR) \
-    $(addprefix --bootclasspath_entry ,$(PRIVATE_BOOTCLASSPATH)) \
-    $(addprefix --classpath_entry ,$(PRIVATE_SHARED_JAVA_HEADER_LIBRARIES)) \
-    --min_sdk_version $(call codename-or-sdk-to-sdk,$(PRIVATE_MIN_SDK_VERSION)) \
-    --allow_empty_bootclasspath \
-    $(if $(filter --core-library,$(PRIVATE_DX_FLAGS)),--core_library) \
-    -i $< -o $@.tmp
-    mv $@.tmp $@
-endef
-
 
 define transform-classes.jar-to-dex
 @echo "target Dex: $(PRIVATE_MODULE)"
 @mkdir -p $(dir $@)
-$(hide) rm -f $(dir $@)classes*.dex
-$(hide) $(DX_COMMAND) \
-    --dex --output=$(dir $@) \
-    --min-sdk-version=$(PRIVATE_MIN_SDK_VERSION) \
-    $(if $(NO_OPTIMIZE_DX), \
-        --no-optimize) \
-    $(if $(GENERATE_DEX_DEBUG), \
-	    --debug --verbose \
-	    --dump-to=$(@:.dex=.lst) \
-	    --dump-width=1000) \
-    $(PRIVATE_DX_FLAGS) \
-    $<
-endef
-
-
-define transform-classes-d8.jar-to-dex
-@echo "target Dex: $(PRIVATE_MODULE)"
-@mkdir -p $(dir $@)
 $(hide) rm -f $(dir $@)classes*.dex $(dir $@)d8_input.jar
 $(hide) $(ZIP2ZIP) -j -i $< -o $(dir $@)d8_input.jar "**/*.class"
 $(hide) $(DX_COMMAND) \
     --output $(dir $@) \
+    $(addprefix --lib ,$(PRIVATE_D8_LIBS)) \
     --min-api $(PRIVATE_MIN_SDK_VERSION) \
     $(subst --main-dex-list=, --main-dex-list , \
         $(filter-out --core-library --multi-dex --minimal-main-dex,$(PRIVATE_DX_FLAGS))) \
@@ -2411,36 +2208,6 @@
 $(hide) rm -f $(dir $@)d8_input.jar
 endef
 
-# Create a mostly-empty .jar file that we'll add to later.
-# The MacOS jar tool doesn't like creating empty jar files,
-# so we need to give it something.
-# $(1) package to create
-define create-empty-package-at
-@mkdir -p $(dir $(1))
-$(hide) touch $(dir $(1))zipdummy
-$(hide) $(JAR) cf $(1) -C $(dir $(1)) zipdummy
-$(hide) zip -qd $(1) zipdummy
-$(hide) rm $(dir $(1))zipdummy
-endef
-
-# Create a mostly-empty .jar file that we'll add to later.
-# The MacOS jar tool doesn't like creating empty jar files,
-# so we need to give it something.
-define create-empty-package
-$(call create-empty-package-at,$@)
-endef
-
-# Copy an arhchive file and delete any class files and empty folders inside.
-# $(1): the source archive file.
-# $(2): the destination archive file.
-define initialize-package-file
-@mkdir -p $(dir $(2))
-$(hide) cp -f $(1) $(2)
-$(hide) zip -qd $(2) "*.class" \
-    $(if $(strip $(PRIVATE_DONT_DELETE_JAR_DIRS)),,"*/") \
-    || true # Ignore the error when nothing to delete.
-endef
-
 #TODO: we kinda want to build different asset packages for
 #      different configurations, then combine them later (or something).
 #      Per-locale, etc.
@@ -2450,8 +2217,9 @@
 #Note that the version numbers are given to aapt as simple default
 #values; applications can override these by explicitly stating
 #them in their manifest.
-define add-assets-to-package
-$(hide) $(AAPT_ASAN_OPTIONS) $(AAPT) package -u $(PRIVATE_AAPT_FLAGS) \
+# $(1) the package file
+define create-assets-package
+$(hide) $(AAPT_ASAN_OPTIONS) $(AAPT) package $(PRIVATE_AAPT_FLAGS) \
     $(addprefix -c , $(PRIVATE_PRODUCT_AAPT_CONFIG)) \
     $(addprefix --preferred-density , $(PRIVATE_PRODUCT_AAPT_PREF_CONFIG)) \
     $(addprefix -M , $(PRIVATE_ANDROID_MANIFEST)) \
@@ -2466,16 +2234,17 @@
     $(addprefix --rename-manifest-package , $(PRIVATE_MANIFEST_PACKAGE_NAME)) \
     $(addprefix --rename-instrumentation-target-package , $(PRIVATE_MANIFEST_INSTRUMENTATION_FOR)) \
     --skip-symbols-without-default-localization \
-    -F $@
+    -F $(1)
 # So that we re-run aapt when the list of input files change
 $(hide) echo $(PRIVATE_RESOURCE_LIST) >/dev/null
 endef
 
 # We need the extra blank line, so that the command will be on a separate line.
-# $(1): the ABI name
-# $(2): the list of shared libraies
+# $(1): the package
+# $(2): the ABI name
+# $(3): the list of shared libraies
 define _add-jni-shared-libs-to-package-per-abi
-$(hide) cp $(2) $(dir $@)lib/$(1)
+$(hide) cp $(3) $(dir $(1))lib/$(2)
 
 endef
 
@@ -2485,36 +2254,43 @@
 JNI_COMPRESS_FLAGS :=
 ZIPALIGN_PAGE_ALIGN_FLAGS :=
 else
-JNI_COMPRESS_FLAGS := -0
+JNI_COMPRESS_FLAGS := -L 0
 ZIPALIGN_PAGE_ALIGN_FLAGS := -p
 endif
 
-define add-jni-shared-libs-to-package
-$(hide) rm -rf $(dir $@)lib
-$(hide) mkdir -p $(addprefix $(dir $@)lib/,$(PRIVATE_JNI_SHARED_LIBRARIES_ABI))
+# $(1): the package file
+define create-jni-shared-libs-package
+rm -rf $(dir $(1))lib
+mkdir -p $(addprefix $(dir $(1))lib/,$(PRIVATE_JNI_SHARED_LIBRARIES_ABI))
 $(foreach abi,$(PRIVATE_JNI_SHARED_LIBRARIES_ABI),\
-  $(call _add-jni-shared-libs-to-package-per-abi,$(abi),\
+  $(call _add-jni-shared-libs-to-package-per-abi,$(1),$(abi),\
     $(patsubst $(abi):%,%,$(filter $(abi):%,$(PRIVATE_JNI_SHARED_LIBRARIES)))))
-$(hide) (cd $(dir $@) && zip -qrX $(JNI_COMPRESS_FLAGS) $(notdir $@) lib)
-$(hide) rm -rf $(dir $@)lib
+$(SOONG_ZIP) $(JNI_COMPRESS_FLAGS) -o $(1) -C $(dir $(1)) -D $(dir $(1))lib
+rm -rf $(dir $(1))lib
 endef
 
-#TODO: update the manifest to point to the dex file
-define add-dex-to-package
-$(call add-dex-to-package-arg,$@)
+# $(1): the jar file.
+# $(2): the classes.dex file.
+define create-dex-jar
+find $(dir $(2)) -maxdepth 1 -name "classes*.dex" | sort > $(1).lst
+$(SOONG_ZIP) -o $(1) -C $(dir $(2)) -l $(1).lst
 endef
 
-# $(1): the package file.
-define add-dex-to-package-arg
-$(hide) find $(dir $(PRIVATE_DEX_FILE)) -maxdepth 1 -name "classes*.dex" | sort | xargs zip -qjX $(1)
-endef
-
-# Add java resources added by the current module.
-# $(1) destination package
-#
+# Add java resources added by the current module to an existing package.
+# $(1) destination package.
 define add-java-resources-to
+  $(call _java-resources,$(1),u)
+endef
+
+# Add java resources added by the current module to a new jar.
+# $(1) destination jar.
+define create-java-resources-jar
+  $(call _java-resources,$(1),c)
+endef
+
+define _java-resources
 $(call dump-words-to-file, $(PRIVATE_EXTRA_JAR_ARGS), $(1).jar-arg-list)
-$(hide) $(JAR) uf $(1) @$(1).jar-arg-list
+$(hide) $(JAR) $(2)f $(1) @$(1).jar-arg-list
 @rm -f $(1).jar-arg-list
 endef
 
@@ -2529,6 +2305,12 @@
   $(JAR) uf $(1) $(call jar-args-sorted-files-in-directory,$(3))
 endef
 
+# $(1): the output resources jar.
+# $(2): the input jar
+define extract-resources-jar
+  $(ZIP2ZIP) -i $(2) -o $(1) -x '**/*.class' -x '**/*/'
+endef
+
 # Sign a package using the specified key/cert.
 #
 define sign-package
@@ -2567,6 +2349,42 @@
   mv $@.compressed $@;
 endef
 
+ifeq ($(HOST_OS),linux)
+# Runs appcompat and store logs in $(PRODUCT_OUT)/appcompat
+define extract-package
+$(if $(filter aapt2, $(1)), \
+  $(AAPT2) dump $@ | awk -F ' |=' '/^Package/{print $$3}' >> $(PRODUCT_OUT)/appcompat/$(PRIVATE_MODULE).log &&, \
+  $(AAPT) dump badging $@ | awk -F \' '/^package/{print $$2}' >> $(PRODUCT_OUT)/appcompat/$(PRIVATE_MODULE).log &&)
+endef
+define appcompat-header
+$(hide) \
+  mkdir -p $(PRODUCT_OUT)/appcompat && \
+  rm -f $(PRODUCT_OUT)/appcompat/$(PRIVATE_MODULE).log && \
+  echo -n "Package name: " >> $(PRODUCT_OUT)/appcompat/$(PRIVATE_MODULE).log && \
+  $(call extract-package, $(1)) \
+  echo "Module name in Android tree: $(PRIVATE_MODULE)" >> $(PRODUCT_OUT)/appcompat/$(PRIVATE_MODULE).log && \
+  echo "Local path in Android tree: $(PRIVATE_PATH)" >> $(PRODUCT_OUT)/appcompat/$(PRIVATE_MODULE).log && \
+  echo "Install path on $(TARGET_PRODUCT)-$(TARGET_BUILD_VARIANT): $(PRIVATE_INSTALLED_MODULE)" >> $(PRODUCT_OUT)/appcompat/$(PRIVATE_MODULE).log && \
+  echo >> $(PRODUCT_OUT)/appcompat/$(PRIVATE_MODULE).log
+endef
+define run-appcompat
+$(hide) \
+  echo "appcompat.sh output:" >> $(PRODUCT_OUT)/appcompat/$(PRIVATE_MODULE).log && \
+  PACKAGING=$(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING art/tools/veridex/appcompat.sh --dex-file=$@ 2>&1 >> $(PRODUCT_OUT)/appcompat/$(PRIVATE_MODULE).log
+endef
+appcompat-files = \
+  art/tools/veridex/appcompat.sh \
+  $(INTERNAL_PLATFORM_HIDDENAPI_FLAGS) \
+  $(HOST_OUT_EXECUTABLES)/veridex \
+  $(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/core_dex_intermediates/classes.dex \
+  $(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/oahl_dex_intermediates/classes.dex
+else
+appcompat-header =
+run-appcompat =
+appcompat-files =
+endif  # HOST_OS == linux
+.KATI_READONLY: appcompat-header run-appcompat appcompat-files
+
 # Remove dynamic timestamps from packages
 #
 define remove-timestamps-from-package
@@ -2576,25 +2394,21 @@
 # Uncompress dex files embedded in an apk.
 #
 define uncompress-dexs
-$(hide) if (zipinfo $@ '*.dex' 2>/dev/null | grep -v ' stor ' >/dev/null) ; then \
-  tmpdir=$@.tmpdir; \
-  rm -rf $$tmpdir && mkdir $$tmpdir; \
-  unzip -q $@ '*.dex' -d $$tmpdir && \
-  zip -qd $@ '*.dex' && \
-  ( cd $$tmpdir && find . -type f | sort | zip -qD -X -0 ../$(notdir $@) -@ ) && \
-  rm -rf $$tmpdir; \
+  if (zipinfo $@ '*.dex' 2>/dev/null | grep -v ' stor ' >/dev/null) ; then \
+    $(ZIP2ZIP) -i $@ -o $@.tmp -0 "classes*.dex" && \
+    mv -f $@.tmp $@ ; \
   fi
 endef
 
-# Uncompress shared libraries embedded in an apk.
+# Uncompress shared JNI libraries embedded in an apk.
 #
-define uncompress-shared-libs
-$(hide) if (zipinfo $@ $(PRIVATE_EMBEDDED_JNI_LIBS) 2>/dev/null | grep -v ' stor ' >/dev/null) ; then \
-  rm -rf $(dir $@)uncompressedlibs && mkdir $(dir $@)uncompressedlibs; \
-  unzip -q $@ $(PRIVATE_EMBEDDED_JNI_LIBS) -d $(dir $@)uncompressedlibs && \
-  zip -qd $@ 'lib/*.so' && \
-  ( cd $(dir $@)uncompressedlibs && find lib -type f | sort | zip -qD -X -0 ../$(notdir $@) -@ ) && \
-  rm -rf $(dir $@)uncompressedlibs; \
+define uncompress-prebuilt-embedded-jni-libs
+  if (zipinfo $@ 'lib/*.so' 2>/dev/null | grep -v ' stor ' >/dev/null) ; then \
+    $(ZIP2ZIP) -i $@ -o $@.tmp -0 'lib/**/*.so' \
+      $(if $(PRIVATE_EMBEDDED_JNI_LIBS), \
+        -x 'lib/**/*.so' \
+        $(addprefix -X ,$(PRIVATE_EMBEDDED_JNI_LIBS))) && \
+    mv -f $@.tmp $@ ; \
   fi
 endef
 
@@ -2639,7 +2453,7 @@
 endef
 
 define copy-and-uncompress-dexs
-$(2): $(1) $(ZIPALIGN)
+$(2): $(1) $(ZIPALIGN) $(ZIP2ZIP)
 	@echo "Uncompress dexs in: $$@"
 	$$(copy-file-to-target)
 	$$(uncompress-dexs)
@@ -2654,7 +2468,35 @@
     $(eval _cmf_tuple := $(subst :, ,$(f))) \
     $(eval _cmf_src := $(word 1,$(_cmf_tuple))) \
     $(eval _cmf_dest := $(word 2,$(_cmf_tuple))) \
-    $(eval $(call copy-one-file,$(_cmf_src),$(_cmf_dest))) \
+    $(if $(filter-out $(_cmf_src), $(_cmf_dest)), \
+      $(eval $(call copy-one-file,$(_cmf_src),$(_cmf_dest)))) \
+    $(_cmf_dest)))
+endef
+
+# Copy the file only if it's a well-formed init script file. For use via $(eval).
+# $(1): source file
+# $(2): destination file
+define copy-init-script-file-checked
+# Host init verifier doesn't exist on darwin.
+ifneq ($(HOST_OS),darwin)
+$(2): $(1) $(HOST_INIT_VERIFIER) $(call intermediates-dir-for,ETC,passwd)/passwd
+	$(hide) $(HOST_INIT_VERIFIER) $$< $(call intermediates-dir-for,ETC,passwd)/passwd
+else
+$(2): $(1)
+endif
+	@echo "Copy init script: $$@"
+	$$(copy-file-to-target)
+endef
+
+# Copies many init script files and check they are well-formed.
+# $(1): The init script files to copy.  Each entry is a ':' separated src:dst pair.
+# Evaluates to the list of the dst files. (ie suitable for a dependency list.)
+define copy-many-init-script-files-checked
+$(foreach f, $(1), $(strip \
+    $(eval _cmf_tuple := $(subst :, ,$(f))) \
+    $(eval _cmf_src := $(word 1,$(_cmf_tuple))) \
+    $(eval _cmf_dest := $(word 2,$(_cmf_tuple))) \
+    $(eval $(call copy-init-script-file-checked,$(_cmf_src),$(_cmf_dest))) \
     $(_cmf_dest)))
 endef
 
@@ -2668,6 +2510,40 @@
 	$$(copy-file-to-target)
 endef
 
+# Copies many xml files and check they are well-formed.
+# $(1): The xml files to copy.  Each entry is a ':' separated src:dst pair.
+# Evaluates to the list of the dst files. (ie suitable for a dependency list.)
+define copy-many-xml-files-checked
+$(foreach f, $(1), $(strip \
+    $(eval _cmf_tuple := $(subst :, ,$(f))) \
+    $(eval _cmf_src := $(word 1,$(_cmf_tuple))) \
+    $(eval _cmf_dest := $(word 2,$(_cmf_tuple))) \
+    $(eval $(call copy-xml-file-checked,$(_cmf_src),$(_cmf_dest))) \
+    $(_cmf_dest)))
+endef
+
+# Copy the file only if it is a well-formed manifest file. For use viea $(eval)
+# $(1): source file
+# $(2): destination file
+define copy-vintf-manifest-checked
+$(2): $(1) $(HOST_OUT_EXECUTABLES)/assemble_vintf
+	@echo "Copy xml: $$@"
+	$(hide) $(HOST_OUT_EXECUTABLES)/assemble_vintf -i $$< >/dev/null  # Don't print the xml file to stdout.
+	$$(copy-file-to-target)
+endef
+
+# Copies many vintf manifest files checked.
+# $(1): The files to copy.  Each entry is a ':' separated src:dst pair
+# Evaluates to the list of the dst files (ie suitable for a dependency list)
+define copy-many-vintf-manifest-files-checked
+$(foreach f, $(1), $(strip \
+    $(eval _cmf_tuple := $(subst :, ,$(f))) \
+    $(eval _cmf_src := $(word 1,$(_cmf_tuple))) \
+    $(eval _cmf_dest := $(word 2,$(_cmf_tuple))) \
+    $(eval $(call copy-vintf-manifest-checked,$(_cmf_src),$(_cmf_dest))) \
+    $(_cmf_dest)))
+endef
+
 # The -t option to acp and the -p option to cp is
 # required for OSX.  OSX has a ridiculous restriction
 # where it's an error for a .a file's modification time
@@ -2764,12 +2640,12 @@
 # Copy an apk to a target location while removing classes*.dex
 # $(1): source file
 # $(2): destination file
-# $(3): LOCAL_DEX_PREOPT, if nostripping then leave classes*.dex
+# $(3): LOCAL_STRIP_DEX, if non-empty then strip classes*.dex
 define dexpreopt-copy-jar
 $(2): $(1)
 	@echo "Copy: $$@"
 	$$(copy-file-to-target)
-	$(if $(filter nostripping,$(3)),,$$(call dexpreopt-remove-classes.dex,$$@))
+	$(if $(3),$$(call dexpreopt-remove-classes.dex,$$@))
 endef
 
 # $(1): the .jar or .apk to remove classes.dex. Note that if all dex files
@@ -2785,65 +2661,103 @@
 fi
 endef
 
+# Copy dex files, invoking $(HIDDENAPI) on them in the process.
+# Also make the source dex file an input of the hiddenapi singleton rule in dex_preopt.mk.
+# Users can set UNSAFE_DISABLE_HIDDENAPI_FLAGS=true to skip this step. This is
+# meant to speed up local incremental builds. Note that skipping this step changes
+# Java semantics of the result dex bytecode. Use at own risk.
+ifneq ($(UNSAFE_DISABLE_HIDDENAPI_FLAGS),true)
 define hiddenapi-copy-dex-files
-$(2): $(1) $(HIDDENAPI) $(INTERNAL_PLATFORM_HIDDENAPI_LIGHT_GREYLIST) \
-      $(INTERNAL_PLATFORM_HIDDENAPI_DARK_GREYLIST) $(INTERNAL_PLATFORM_HIDDENAPI_BLACKLIST)
+$(2): $(1) $(HIDDENAPI) $(INTERNAL_PLATFORM_HIDDENAPI_FLAGS)
 	@rm -rf $(dir $(2))
 	@mkdir -p $(dir $(2))
-	find $(dir $(1)) -maxdepth 1 -name "classes*.dex" | sort | \
-		xargs -I{} cp -f {} $(dir $(2))
-	find $(dir $(2)) -name "classes*.dex" | sort | sed 's/^/--dex=/' | \
-		xargs $(HIDDENAPI) --light-greylist=$(INTERNAL_PLATFORM_HIDDENAPI_LIGHT_GREYLIST) \
-		                   --dark-greylist=$(INTERNAL_PLATFORM_HIDDENAPI_DARK_GREYLIST) \
-		                   --blacklist=$(INTERNAL_PLATFORM_HIDDENAPI_BLACKLIST)
-endef
+	for INPUT_DEX in `find $(dir $(1)) -maxdepth 1 -name "classes*.dex" | sort`; do \
+	    echo "--input-dex=$$$${INPUT_DEX}"; \
+	    echo "--output-dex=$(dir $(2))/`basename $$$${INPUT_DEX}`"; \
+	done | xargs $(HIDDENAPI) encode --api-flags=$(INTERNAL_PLATFORM_HIDDENAPI_FLAGS)
 
-define hiddenapi-copy-soong-jar
-$(2): PRIVATE_FOLDER := $(dir $(2))dex-hiddenapi
-$(2): $(1) $(HIDDENAPI) $(SOONG_ZIP) $(MERGE_ZIPS) $(INTERNAL_PLATFORM_HIDDENAPI_LIGHT_GREYLIST) \
-      $(INTERNAL_PLATFORM_HIDDENAPI_DARK_GREYLIST) $(INTERNAL_PLATFORM_HIDDENAPI_BLACKLIST)
-	@echo "Hidden API: $$@"
-	$$(copy-file-to-target)
-	@rm -rf $${PRIVATE_FOLDER}
-	@mkdir -p $${PRIVATE_FOLDER}
-	unzip -q $(2) 'classes*.dex' -d $${PRIVATE_FOLDER}
-	find $${PRIVATE_FOLDER} -name "classes*.dex" | sort | sed 's/^/--dex=/' | \
-		xargs $(HIDDENAPI) --light-greylist=$(INTERNAL_PLATFORM_HIDDENAPI_LIGHT_GREYLIST) \
-		                   --dark-greylist=$(INTERNAL_PLATFORM_HIDDENAPI_DARK_GREYLIST) \
-		                   --blacklist=$(INTERNAL_PLATFORM_HIDDENAPI_BLACKLIST)
-	$(SOONG_ZIP) -o $${PRIVATE_FOLDER}/classes.dex.jar -C $${PRIVATE_FOLDER} -D $${PRIVATE_FOLDER}
-	$(MERGE_ZIPS) -D -zipToNotStrip $${PRIVATE_FOLDER}/classes.dex.jar -stripFile "classes*.dex" \
-		$(2) $${PRIVATE_FOLDER}/classes.dex.jar $(1)
+$(INTERNAL_PLATFORM_HIDDENAPI_PRIVATE_LIST): $(1)
+$(INTERNAL_PLATFORM_HIDDENAPI_PRIVATE_LIST): PRIVATE_DEX_INPUTS := $$(PRIVATE_DEX_INPUTS) $(1)
 endef
+else  # UNSAFE_DISABLE_HIDDENAPI_FLAGS
+define hiddenapi-copy-dex-files
+$(2): $(1)
+	echo "WARNING: skipping hiddenapi post-processing for $(1)" 1>&2
+	@rm -rf $(dir $(2))
+	@mkdir -p $(dir $(2))
+	find $(dir $(1)) -maxdepth 1 -name "classes*.dex" | xargs -I{} cp -f {} $(dir $(2))/
+endef
+endif  # UNSAFE_DISABLE_HIDDENAPI_FLAGS
 
-###########################################################
-## Commands to call Proguard
-###########################################################
-ifdef TARGET_OPENJDK9
-define transform-jar-to-proguard
-@echo Skipping Proguard: $< $@
-$(hide) cp '$<' $@
-endef
-else
-define transform-jar-to-proguard
-@echo Proguard: $@
-$(hide) $(PROGUARD) -injars $< -outjars $@ $(PRIVATE_PROGUARD_FLAGS) \
-    $(addprefix -injars , $(PRIVATE_EXTRA_INPUT_JAR))
-endef
+# Generate a greylist.txt from a classes.jar
+define hiddenapi-generate-csv
+ifneq (,$(wildcard frameworks/base))
+# Only generate this target if we're in a tree with frameworks/base present.
+$(2): $(1) $(CLASS2GREYLIST) $(INTERNAL_PLATFORM_HIDDENAPI_PUBLIC_LIST)
+	$(CLASS2GREYLIST) --public-api-list $(INTERNAL_PLATFORM_HIDDENAPI_PUBLIC_LIST) $(1) \
+	    --write-flags-csv $(2)
+
+$(3): $(1) $(CLASS2GREYLIST) $(INTERNAL_PLATFORM_HIDDENAPI_PUBLIC_LIST)
+	$(CLASS2GREYLIST) --public-api-list $(INTERNAL_PLATFORM_HIDDENAPI_PUBLIC_LIST) $(1) \
+	    --write-metadata-csv $(3)
+
+$(INTERNAL_PLATFORM_HIDDENAPI_FLAGS): $(2)
+$(INTERNAL_PLATFORM_HIDDENAPI_FLAGS): PRIVATE_FLAGS_INPUTS := $$(PRIVATE_FLAGS_INPUTS) $(2)
+
+$(INTERNAL_PLATFORM_HIDDENAPI_GREYLIST_METADATA): $(5)
+$(INTERNAL_PLATFORM_HIDDENAPI_GREYLIST_METADATA): \
+    PRIVATE_METADATA_INPUTS := $$(PRIVATE_METADATA_INPUTS) $(5)
+
 endif
+endef
+
+# File names for intermediate dex files of `hiddenapi-copy-soong-jar`.
+hiddenapi-soong-input-dex = $(dir $(1))/hiddenapi/dex-input/classes.dex
+hiddenapi-soong-output-dex = $(dir $(1))/hiddenapi/dex-output/classes.dex
+
+# Decompress a JAR with dex files, invoke $(HIDDENAPI) on them and compress again.
+define hiddenapi-copy-soong-jar
+$(call hiddenapi-soong-input-dex,$(2)): $(1)
+	@rm -rf `dirname $$@`
+	@mkdir -p `dirname $$@`
+	unzip -o -q $(1) 'classes*.dex' -d `dirname $$@`
+	find `dirname $$@` -maxdepth 1 -name 'classes*.dex' | xargs touch
+
+$(call hiddenapi-copy-dex-files,\
+    $(call hiddenapi-soong-input-dex,$(2)),\
+    $(call hiddenapi-soong-output-dex,$(2)))
+
+$(2): OUTPUT_DIR := $(dir $(call hiddenapi-soong-output-dex,$(2)))
+$(2): OUTPUT_JAR := $(dir $(call hiddenapi-soong-output-dex,$(2)))classes.jar
+$(2): $(1) $(call hiddenapi-soong-output-dex,$(2)) | $(SOONG_ZIP) $(MERGE_ZIPS)
+	$(SOONG_ZIP) -o $${OUTPUT_JAR} -C $${OUTPUT_DIR} -f "$${OUTPUT_DIR}/classes*.dex"
+	$(MERGE_ZIPS) -D -zipToNotStrip $${OUTPUT_JAR} -stripFile "classes*.dex" $(2) $${OUTPUT_JAR} $(1)
+endef
 
 
 ###########################################################
 ## Commands to call R8
 ###########################################################
+
+# Use --debug flag for eng builds by default
+ifeq (eng,$(TARGET_BUILD_VARIANT))
+R8_DEBUG_MODE := --debug
+else
+R8_DEBUG_MODE :=
+endif
+
 define transform-jar-to-dex-r8
 @echo R8: $@
+$(hide) rm -f $(PRIVATE_PROGUARD_DICTIONARY)
 $(hide) $(R8_COMPAT_PROGUARD) -injars '$<' \
     --min-api $(PRIVATE_MIN_SDK_VERSION) \
+    --no-data-resources \
     --force-proguard-compatibility --output $(subst classes.dex,,$@) \
+    $(R8_DEBUG_MODE) \
     $(PRIVATE_PROGUARD_FLAGS) \
     $(addprefix -injars , $(PRIVATE_EXTRA_INPUT_JAR)) \
     $(PRIVATE_DX_FLAGS)
+$(hide) touch $(PRIVATE_PROGUARD_DICTIONARY)
 endef
 
 ###########################################################
@@ -3089,15 +3003,23 @@
 
 # For each suite:
 # 1. Copy the files to the many suite output directories.
+#    And for test config files, we'll check the .xml is well-formed before copy.
 # 2. Add all the files to each suite's dependent files list.
-# 3. Do the dependency addition to my_all_targets
-# Requires for each suite: my_compat_dist_$(suite) to be defined.
+# 3. Do the dependency addition to my_all_targets.
+# 4. Save the module name to COMPATIBILITY.$(suite).MODULES for each suite.
+# Requires for each suite: use my_compat_dist_config_$(suite) to define the test config.
+#    and use my_compat_dist_$(suite) to define the others.
 define create-suite-dependencies
 $(foreach suite, $(LOCAL_COMPATIBILITY_SUITE), \
   $(eval COMPATIBILITY.$(suite).FILES := \
-    $$(COMPATIBILITY.$(suite).FILES) $$(foreach f,$$(my_compat_dist_$(suite)),$$(call word-colon,2,$$(f))))) \
+    $$(COMPATIBILITY.$(suite).FILES) $$(foreach f,$$(my_compat_dist_$(suite)),$$(call word-colon,2,$$(f))) \
+      $$(foreach f,$$(my_compat_dist_config_$(suite)),$$(call word-colon,2,$$(f)))) \
+  $(eval COMPATIBILITY.$(suite).MODULES := \
+    $$(COMPATIBILITY.$(suite).MODULES) $$(my_register_name))) \
 $(eval $(my_all_targets) : $(call copy-many-files, \
-  $(sort $(foreach suite,$(LOCAL_COMPATIBILITY_SUITE),$(my_compat_dist_$(suite))))))
+  $(sort $(foreach suite,$(LOCAL_COMPATIBILITY_SUITE),$(my_compat_dist_$(suite))))) \
+  $(call copy-many-xml-files-checked, \
+    $(sort $(foreach suite,$(LOCAL_COMPATIBILITY_SUITE),$(my_compat_dist_config_$(suite))))))
 endef
 
 ###########################################################
@@ -3242,7 +3164,7 @@
 ##
 ## $(1): path to validate
 define try-validate-path-is-subdir
-$(strip 
+$(strip \
     $(if $(filter /%,$(1)),
         $(1) starts with a slash
     )
@@ -3451,23 +3373,47 @@
   $(if $(call has-system-sdk-version,$(1)),$(patsubst system_%,%,$(1)),$(1)))
 endef
 
-# Convert to lower case without requiring a shell, which isn't cacheable.
-to-lower=$(subst A,a,$(subst B,b,$(subst C,c,$(subst D,d,$(subst E,e,$(subst F,f,$(subst G,g,$(subst H,h,$(subst I,i,$(subst J,j,$(subst K,k,$(subst L,l,$(subst M,m,$(subst N,n,$(subst O,o,$(subst P,p,$(subst Q,q,$(subst R,r,$(subst S,s,$(subst T,t,$(subst U,u,$(subst V,v,$(subst W,w,$(subst X,x,$(subst Y,y,$(subst Z,z,$1))))))))))))))))))))))))))
+###########################################################
+## Verify module name meets character requirements:
+##   a-z A-Z 0-9
+##   _.+-,@~
+##
+## This is a subset of bazel's target name restrictions:
+##   https://docs.bazel.build/versions/master/build-ref.html#name
+##
+## Kati has problems with '=': https://github.com/google/kati/issues/138
+###########################################################
+define verify-module-name
+$(if $(filter-out $(LOCAL_MODULE),$(subst /,,$(LOCAL_MODULE))), \
+  $(call pretty-warning,Module name contains a /$(comma) use LOCAL_MODULE_STEM and LOCAL_MODULE_RELATIVE_PATH instead)) \
+$(if $(call _invalid-name-chars,$(LOCAL_MODULE)), \
+  $(call pretty-error,Invalid characters in module name: $(call _invalid-name-chars,$(LOCAL_MODULE))))
+endef
+define _invalid-name-chars
+$(subst _,,$(subst .,,$(subst +,,$(subst -,,$(subst $(comma),,$(subst @,,$(subst ~,,$(subst 0,,$(subst 1,,$(subst 2,,$(subst 3,,$(subst 4,,$(subst 5,,$(subst 6,,$(subst 7,,$(subst 8,,$(subst 9,,$(subst a,,$(subst b,,$(subst c,,$(subst d,,$(subst e,,$(subst f,,$(subst g,,$(subst h,,$(subst i,,$(subst j,,$(subst k,,$(subst l,,$(subst m,,$(subst n,,$(subst o,,$(subst p,,$(subst q,,$(subst r,,$(subst s,,$(subst t,,$(subst u,,$(subst v,,$(subst w,,$(subst x,,$(subst y,,$(subst z,,$(call to-lower,$(1)))))))))))))))))))))))))))))))))))))))))))))
+endef
+.KATI_READONLY := verify-module-name _invalid-name-chars
 
-# Convert to upper case without requiring a shell, which isn't cacheable.
-to-upper=$(subst a,A,$(subst b,B,$(subst c,C,$(subst d,D,$(subst e,E,$(subst f,F,$(subst g,G,$(subst h,H,$(subst i,I,$(subst j,J,$(subst k,K,$(subst l,L,$(subst m,M,$(subst n,N,$(subst o,O,$(subst p,P,$(subst q,Q,$(subst r,R,$(subst s,S,$(subst t,T,$(subst u,U,$(subst v,V,$(subst w,W,$(subst x,X,$(subst y,Y,$(subst z,Z,$1))))))))))))))))))))))))))
+###########################################################
+## Verify module stem meets character requirements:
+##   a-z A-Z 0-9
+##   _.+-,@~
+##
+## This is a subset of bazel's target name restrictions:
+##   https://docs.bazel.build/versions/master/build-ref.html#name
+##
+## $(1): The module stem variable to check
+###########################################################
+define verify-module-stem
+$(if $(filter-out $($(1)),$(subst /,,$($(1)))), \
+  $(call pretty-warning,Module stem \($(1)\) contains a /$(comma) use LOCAL_MODULE_RELATIVE_PATH instead)) \
+$(if $(call _invalid-name-chars,$($(1))), \
+  $(call pretty-error,Invalid characters in module stem \($(1)\): $(call _invalid-name-chars,$($(1)))))
+endef
+.KATI_READONLY := verify-module-stem
 
-# Sanity-check to-lower and to-upper
-lower := abcdefghijklmnopqrstuvwxyz-_
-upper := ABCDEFGHIJKLMNOPQRSTUVWXYZ-_
-
-ifneq ($(lower),$(call to-lower,$(upper)))
-  $(error to-lower sanity check failure)
-endif
-
-ifneq ($(upper),$(call to-upper,$(lower)))
-  $(error to-upper sanity check failure)
-endif
-
-lower :=
-upper :=
+$(KATI_obsolete_var \
+  create-empty-package \
+  initialize-package-file \
+  add-jni-shared-libs-to-package,\
+  These functions have been removed)
diff --git a/core/dex_preopt.mk b/core/dex_preopt.mk
index 7298bde..92ed970 100644
--- a/core/dex_preopt.mk
+++ b/core/dex_preopt.mk
@@ -21,7 +21,13 @@
 
 # The default filter for which files go into the system_other image (if it is
 # being used). To bundle everything one should set this to '%'
-SYSTEM_OTHER_ODEX_FILTER ?= app/% priv-app/%
+SYSTEM_OTHER_ODEX_FILTER ?= \
+    app/% \
+    priv-app/% \
+    product_services/app/% \
+    product_services/priv-app/% \
+    product/app/% \
+    product/priv-app/% \
 
 # Method returning whether the install path $(1) should be for system_other.
 # Under SANITIZE_LITE, we do not want system_other. Just put things under /data/asan.
@@ -67,7 +73,7 @@
 _dbj_jar_no_dex := $(DEXPREOPT_BOOT_JAR_DIR_FULL_PATH)/$(1)_nodex.jar
 _dbj_src_jar := $(call intermediates-dir-for,JAVA_LIBRARIES,$(1),,COMMON)/javalib.jar
 
-$(call dexpreopt-copy-jar,$$(_dbj_src_jar),$$(_dbj_jar_no_dex),$(DEX_PREOPT_DEFAULT))
+$(call dexpreopt-copy-jar,$$(_dbj_src_jar),$$(_dbj_jar_no_dex),$(filter-out nostripping,$(DEX_PREOPT_DEFAULT)))
 
 _dbj_jar_no_dex :=
 _dbj_src_jar :=
@@ -90,6 +96,59 @@
 $(TARGET_2ND_ARCH_VAR_PREFIX)DEXPREOPT_ONE_FILE_DEPENDENCY_BUILT_BOOT_PREOPT := $($(TARGET_2ND_ARCH_VAR_PREFIX)DEFAULT_DEX_PREOPT_BUILT_IMAGE_FILENAME)
 endif  # TARGET_2ND_ARCH
 
+# === hiddenapi rules ===
+
+hiddenapi_stubs_jar = $(call intermediates-dir-for,JAVA_LIBRARIES,$(1),,COMMON)/javalib.jar
+
+# Public API stubs
+HIDDENAPI_STUBS := \
+    $(call hiddenapi_stubs_jar,android_stubs_current) \
+    $(call hiddenapi_stubs_jar,android.test.base.stubs)
+
+# System API stubs
+HIDDENAPI_STUBS_SYSTEM := \
+    $(call hiddenapi_stubs_jar,android_system_stubs_current)
+
+# Test API stubs
+HIDDENAPI_STUBS_TEST := \
+    $(call hiddenapi_stubs_jar,android_test_stubs_current)
+
+# Allow products to define their own stubs for custom product jars that apps can use.
+ifdef PRODUCT_HIDDENAPI_STUBS
+  HIDDENAPI_STUBS += $(foreach stub,$(PRODUCT_HIDDENAPI_STUBS), $(call hiddenapi_stubs_jar,$(stub)))
+endif
+
+ifdef PRODUCT_HIDDENAPI_STUBS_SYSTEM
+  HIDDENAPI_STUBS_SYSTEM += $(foreach stub,$(PRODUCT_HIDDENAPI_STUBS_SYSTEM), $(call hiddenapi_stubs_jar,$(stub)))
+endif
+
+ifdef PRODUCT_HIDDENAPI_STUBS_TEST
+  HIDDENAPI_STUBS_TEST += $(foreach stub,$(PRODUCT_HIDDENAPI_STUBS_TEST), $(call hiddenapi_stubs_jar,$(stub)))
+endif
+
+# Singleton rule which applies $(HIDDENAPI) on all boot class path dex files.
+# Inputs are filled with `hiddenapi-copy-dex-files` rules.
+.KATI_RESTAT: \
+	$(INTERNAL_PLATFORM_HIDDENAPI_PRIVATE_LIST) \
+	$(INTERNAL_PLATFORM_HIDDENAPI_PUBLIC_LIST)
+$(INTERNAL_PLATFORM_HIDDENAPI_PRIVATE_LIST): PRIVATE_HIDDENAPI_STUBS := $(HIDDENAPI_STUBS)
+$(INTERNAL_PLATFORM_HIDDENAPI_PRIVATE_LIST): PRIVATE_HIDDENAPI_STUBS_SYSTEM := $(HIDDENAPI_STUBS_SYSTEM)
+$(INTERNAL_PLATFORM_HIDDENAPI_PRIVATE_LIST): PRIVATE_HIDDENAPI_STUBS_TEST := $(HIDDENAPI_STUBS_TEST)
+$(INTERNAL_PLATFORM_HIDDENAPI_PRIVATE_LIST): \
+    .KATI_IMPLICIT_OUTPUTS := $(INTERNAL_PLATFORM_HIDDENAPI_PUBLIC_LIST)
+$(INTERNAL_PLATFORM_HIDDENAPI_PRIVATE_LIST): $(HIDDENAPI) $(HIDDENAPI_STUBS) \
+                                             $(HIDDENAPI_STUBS_SYSTEM) $(HIDDENAPI_STUBS_TEST)
+	for INPUT_DEX in $(PRIVATE_DEX_INPUTS); do \
+		find `dirname $${INPUT_DEX}` -maxdepth 1 -name "classes*.dex"; \
+	done | sort | sed 's/^/--boot-dex=/' | xargs $(HIDDENAPI) list \
+	    --stub-classpath=$(call normalize-path-list, $(PRIVATE_HIDDENAPI_STUBS)) \
+	    --stub-classpath=$(call normalize-path-list, $(PRIVATE_HIDDENAPI_STUBS_SYSTEM)) \
+	    --stub-classpath=$(call normalize-path-list, $(PRIVATE_HIDDENAPI_STUBS_TEST)) \
+	    --out-public=$(INTERNAL_PLATFORM_HIDDENAPI_PUBLIC_LIST).tmp \
+	    --out-private=$(INTERNAL_PLATFORM_HIDDENAPI_PRIVATE_LIST).tmp
+	$(call commit-change-for-toc,$(INTERNAL_PLATFORM_HIDDENAPI_PUBLIC_LIST))
+	$(call commit-change-for-toc,$(INTERNAL_PLATFORM_HIDDENAPI_PRIVATE_LIST))
+
 ifeq ($(PRODUCT_DIST_BOOT_AND_SYSTEM_JARS),true)
 boot_profile_jars_zip := $(PRODUCT_OUT)/boot_profile_jars.zip
 all_boot_jars := \
@@ -100,7 +159,7 @@
 $(boot_profile_jars_zip): $(all_boot_jars) $(SOONG_ZIP)
 	echo "Create boot profiles package: $@"
 	rm -f $@
-	$(SOONG_ZIP) -o $@ -C $(PRODUCT_OUT) $(PRIVATE_JARS)
+	$(SOONG_ZIP) -o $@ -C $(PRODUCT_OUT) $(addprefix -f ,$(PRIVATE_JARS))
 
 droidcore: $(boot_profile_jars_zip)
 
diff --git a/core/dex_preopt_libart.mk b/core/dex_preopt_libart.mk
index 9c4d55d..1c9ef64 100644
--- a/core/dex_preopt_libart.mk
+++ b/core/dex_preopt_libart.mk
@@ -7,23 +7,16 @@
 # Set USE_DEX2OAT_DEBUG to false for only building non-debug versions.
 ifeq ($(USE_DEX2OAT_DEBUG),false)
 DEX2OAT := $(HOST_OUT_EXECUTABLES)/dex2oat$(HOST_EXECUTABLE_SUFFIX)
-PATCHOAT := $(HOST_OUT_EXECUTABLES)/patchoat$(HOST_EXECUTABLE_SUFFIX)
 else
 DEX2OAT := $(HOST_OUT_EXECUTABLES)/dex2oatd$(HOST_EXECUTABLE_SUFFIX)
-PATCHOAT := $(HOST_OUT_EXECUTABLES)/patchoatd$(HOST_EXECUTABLE_SUFFIX)
 endif
 
 DEX2OAT_DEPENDENCY += $(DEX2OAT)
-PATCHOAT_DEPENDENCY += $(PATCHOAT)
 
 # Use the first preloaded-classes file in PRODUCT_COPY_FILES.
 PRELOADED_CLASSES := $(call word-colon,1,$(firstword \
     $(filter %system/etc/preloaded-classes,$(PRODUCT_COPY_FILES))))
 
-# Use the first compiled-classes file in PRODUCT_COPY_FILES.
-COMPILED_CLASSES := $(call word-colon,1,$(firstword \
-    $(filter %system/etc/compiled-classes,$(PRODUCT_COPY_FILES))))
-
 # Use the first dirty-image-objects file in PRODUCT_COPY_FILES.
 DIRTY_IMAGE_OBJECTS := $(call word-colon,1,$(firstword \
     $(filter %system/etc/dirty-image-objects,$(PRODUCT_COPY_FILES))))
@@ -81,8 +74,7 @@
 $(dir $(2))$(1)/$(notdir $(2))
 endef
 
-# note we use core-libart.jar in place of core.jar for ART.
-LIBART_TARGET_BOOT_JARS := $(patsubst core, core-libart,$(DEXPREOPT_BOOT_JARS_MODULES))
+LIBART_TARGET_BOOT_JARS := $(DEXPREOPT_BOOT_JARS_MODULES)
 LIBART_TARGET_BOOT_DEX_LOCATIONS := $(foreach jar,$(LIBART_TARGET_BOOT_JARS),/$(DEXPREOPT_BOOT_JAR_DIR)/$(jar).jar)
 LIBART_TARGET_BOOT_DEX_FILES := $(foreach jar,$(LIBART_TARGET_BOOT_JARS),$(call intermediates-dir-for,JAVA_LIBRARIES,$(jar),,COMMON)/javalib.jar)
 
@@ -90,8 +82,8 @@
 # is converted into to boot.art (to match the legacy assumption that boot.art
 # exists), and the rest are converted to boot-<name>.art.
 # In addition, each .art file has an associated .oat file.
-LIBART_TARGET_BOOT_ART_EXTRA_FILES := $(foreach jar,$(wordlist 2,999,$(LIBART_TARGET_BOOT_JARS)),boot-$(jar).art boot-$(jar).art.rel boot-$(jar).oat)
-LIBART_TARGET_BOOT_ART_EXTRA_FILES += boot.art.rel boot.oat
+LIBART_TARGET_BOOT_ART_EXTRA_FILES := $(foreach jar,$(wordlist 2,999,$(LIBART_TARGET_BOOT_JARS)),boot-$(jar).art boot-$(jar).oat)
+LIBART_TARGET_BOOT_ART_EXTRA_FILES += boot.oat
 LIBART_TARGET_BOOT_ART_VDEX_FILES := $(foreach jar,$(wordlist 2,999,$(LIBART_TARGET_BOOT_JARS)),boot-$(jar).vdex)
 LIBART_TARGET_BOOT_ART_VDEX_FILES += boot.vdex
 
@@ -104,16 +96,27 @@
 my_use_profile_for_boot_image := true
 endif
 endif
+ifeq (,$(strip $(LIBART_TARGET_BOOT_DEX_FILES)))
+my_use_profile_for_boot_image := false
+endif
 
 ifeq (true,$(my_use_profile_for_boot_image))
 
-# Location of text based profile for the boot image.
-my_boot_image_profile_location := $(PRODUCT_DEX_PREOPT_BOOT_IMAGE_PROFILE_LOCATION)
-ifeq (,$(my_boot_image_profile_location))
+boot_image_profiles := $(PRODUCT_DEX_PREOPT_BOOT_IMAGE_PROFILE_LOCATION)
+
+ifeq (,$(boot_image_profiles))
 # If not set, use the default.
-my_boot_image_profile_location := frameworks/base/config/boot-image-profile.txt
+boot_image_profiles := frameworks/base/config/boot-image-profile.txt
 endif
 
+# Location of text based profile for the boot image.
+my_boot_image_profile_location := $(PRODUCT_OUT)/dex_bootjars/boot-image-profile.txt
+
+$(my_boot_image_profile_location): $(boot_image_profiles)
+	@echo 'Generating $@ for profman'
+	@rm -rf $@
+	$(hide) cat $^ > $@
+
 # Code to create the boot image profile, not in dex_preopt_libart_boot.mk since the profile is the same for all archs.
 my_out_boot_image_profile_location := $(DEXPREOPT_BOOT_JAR_DIR_FULL_PATH)/boot.prof
 $(my_out_boot_image_profile_location): PRIVATE_PROFILE_INPUT_LOCATION := $(my_boot_image_profile_location)
@@ -169,7 +172,10 @@
 # $(2): the output .odex file
 # In the case where LOCAL_ENFORCE_USES_LIBRARIES is true, PRIVATE_DEX2OAT_CLASS_LOADER_CONTEXT
 # contains the normalized path list of the libraries. This makes it easier to conditionally prepend
-# org.apache.http.legacy.boot based on the SDK level if required.
+# org.apache.http.legacy.impl based on the SDK level if required.
+#
+# Pass --avoid-storing-invocation to make the output deterministics between
+# different products that may have different paths on the command line.
 define dex2oat-one-file
 $(hide) rm -f $(2)
 $(hide) mkdir -p $(dir $(2))
@@ -179,11 +185,13 @@
 stored_class_loader_context_arg="" && \
 uses_library_names="$(PRIVATE_USES_LIBRARY_NAMES)" && \
 optional_uses_library_names="$(PRIVATE_OPTIONAL_USES_LIBRARY_NAMES)" && \
-$(if $(PRIVATE_ENFORCE_USES_LIBRARIES), \
+aapt_binary="$(AAPT)" && \
+$(if $(filter true,$(PRIVATE_ENFORCE_USES_LIBRARIES)), \
 source build/make/core/verify_uses_libraries.sh "$(1)" && \
 source build/make/core/construct_context.sh "$(PRIVATE_CONDITIONAL_USES_LIBRARIES_HOST)" "$(PRIVATE_CONDITIONAL_USES_LIBRARIES_TARGET)" && \
 ,) \
 ANDROID_LOG_TAGS="*:e" $(DEX2OAT) \
+	--avoid-storing-invocation \
 	--runtime-arg -Xms$(DEX2OAT_XMS) --runtime-arg -Xmx$(DEX2OAT_XMX) \
 	$${class_loader_context_arg} \
 	$${stored_class_loader_context_arg} \
@@ -195,7 +203,6 @@
 	--instruction-set=$($(PRIVATE_2ND_ARCH_VAR_PREFIX)DEX2OAT_TARGET_ARCH) \
 	--instruction-set-variant=$($(PRIVATE_2ND_ARCH_VAR_PREFIX)DEX2OAT_TARGET_CPU_VARIANT) \
 	--instruction-set-features=$($(PRIVATE_2ND_ARCH_VAR_PREFIX)DEX2OAT_TARGET_INSTRUCTION_SET_FEATURES) \
-	--runtime-arg -Xnorelocate --compile-pic \
 	--no-generate-debug-info --generate-build-id \
 	--abort-on-hard-verifier-error \
 	--force-determinism \
diff --git a/core/dex_preopt_libart_boot.mk b/core/dex_preopt_libart_boot.mk
index a5e7e88..70a934c 100644
--- a/core/dex_preopt_libart_boot.mk
+++ b/core/dex_preopt_libart_boot.mk
@@ -33,12 +33,6 @@
 $(my_2nd_arch_prefix)LIBART_TARGET_BOOT_ART_VDEX_INSTALLED_FILES := $(addprefix $(dir $($(my_2nd_arch_prefix)DEFAULT_DEX_PREOPT_INSTALLED_IMAGE)),\
     $(LIBART_TARGET_BOOT_ART_VDEX_FILES))
 
-# If we have a compiled-classes file, create a parameter.
-COMPILED_CLASSES_FLAGS :=
-ifneq ($(COMPILED_CLASSES),)
-  COMPILED_CLASSES_FLAGS := --compiled-classes=$(COMPILED_CLASSES)
-endif
-
 # If we have a dirty-image-objects file, create a parameter.
 DIRTY_IMAGE_OBJECTS_FLAGS :=
 ifneq ($(DIRTY_IMAGE_OBJECTS),)
@@ -59,13 +53,12 @@
 	$(hide) $(ACP) -fp $(dir $<)$(notdir $@) $@
 
 ifeq (,$(my_out_boot_image_profile_location))
-my_boot_image_flags := $(COMPILED_CLASSES_FLAGS)
-my_boot_image_flags += --image-classes=$(PRELOADED_CLASSES)
-my_boot_image_flags += $(DIRTY_IMAGE_OBJECTS_FLAGS)
+my_boot_image_flags := --image-classes=$(PRELOADED_CLASSES)
 else
 my_boot_image_flags := --compiler-filter=speed-profile
 my_boot_image_flags += --profile-file=$(my_out_boot_image_profile_location)
 endif
+my_boot_image_flags += $(DIRTY_IMAGE_OBJECTS_FLAGS)
 
 ifneq (addresstrue,$(SANITIZE_TARGET)$(SANITIZE_LITE))
 # Skip recompiling the boot image for the second sanitization phase. We'll get separate paths
@@ -92,22 +85,25 @@
 
 $($(my_2nd_arch_prefix)DEFAULT_DEX_PREOPT_BUILT_IMAGE_FILENAME): PRIVATE_BOOT_IMAGE_FLAGS := $(my_boot_image_flags)
 $($(my_2nd_arch_prefix)DEFAULT_DEX_PREOPT_BUILT_IMAGE_FILENAME): PRIVATE_2ND_ARCH_VAR_PREFIX := $(my_2nd_arch_prefix)
-$($(my_2nd_arch_prefix)DEFAULT_DEX_PREOPT_BUILT_IMAGE_FILENAME): PRIVATE_IMAGE_LOCATION := $($(my_2nd_arch_prefix)DEFAULT_DEX_PREOPT_BUILT_IMAGE_LOCATION)
 # Use dex2oat debug version for better error reporting
-$($(my_2nd_arch_prefix)DEFAULT_DEX_PREOPT_BUILT_IMAGE_FILENAME) : $(LIBART_TARGET_BOOT_DEX_FILES) $(PRELOADED_CLASSES) $(COMPILED_CLASSES) $(DIRTY_IMAGE_OBJECTS) $(DEX2OAT_DEPENDENCY) $(PATCHOAT_DEPENDENCY) $(my_out_boot_image_profile_location)
+# Pass --avoid-storing-invocation to make the output deterministics between
+# different products that may have different paths on the command line.
+$($(my_2nd_arch_prefix)DEFAULT_DEX_PREOPT_BUILT_IMAGE_FILENAME) : $(LIBART_TARGET_BOOT_DEX_FILES) $(PRELOADED_CLASSES) $(DIRTY_IMAGE_OBJECTS) $(DEX2OAT_DEPENDENCY) $(my_out_boot_image_profile_location)
 	@echo "target dex2oat: $@"
 	@mkdir -p $(dir $@)
 	@mkdir -p $(dir $($(PRIVATE_2ND_ARCH_VAR_PREFIX)LIBART_TARGET_BOOT_OAT_UNSTRIPPED))
-	@rm -f $(dir $@)/*.art $(dir $@)/*.oat $(dir $@)/*.art.rel
+	@rm -f $(dir $@)/*.art $(dir $@)/*.oat
 	@rm -f $(dir $($(PRIVATE_2ND_ARCH_VAR_PREFIX)LIBART_TARGET_BOOT_OAT_UNSTRIPPED))/*.art
 	@rm -f $(dir $($(PRIVATE_2ND_ARCH_VAR_PREFIX)LIBART_TARGET_BOOT_OAT_UNSTRIPPED))/*.oat
-	@rm -f $(dir $($(PRIVATE_2ND_ARCH_VAR_PREFIX)LIBART_TARGET_BOOT_OAT_UNSTRIPPED))/*.art.rel
 	$(hide) $(DEX2OAT_BOOT_IMAGE_LOG_TAGS) $(DEX2OAT) --runtime-arg -Xms$(DEX2OAT_IMAGE_XMS) \
+		--avoid-storing-invocation \
 		--runtime-arg -Xmx$(DEX2OAT_IMAGE_XMX) \
 		$(PRIVATE_BOOT_IMAGE_FLAGS) \
 		$(addprefix --dex-file=,$(LIBART_TARGET_BOOT_DEX_FILES)) \
 		$(addprefix --dex-location=,$(LIBART_TARGET_BOOT_DEX_LOCATIONS)) \
+		--generate-debug-info --generate-build-id \
 		--oat-symbols=$($(PRIVATE_2ND_ARCH_VAR_PREFIX)LIBART_TARGET_BOOT_OAT_UNSTRIPPED) \
+		--strip \
 		--oat-file=$(patsubst %.art,%.oat,$@) \
 		--oat-location=$(patsubst %.art,%.oat,$($(PRIVATE_2ND_ARCH_VAR_PREFIX)LIBART_BOOT_IMAGE_FILENAME)) \
 		--image=$@ --base=$(LIBART_IMG_TARGET_BASE_ADDRESS) \
@@ -115,17 +111,10 @@
 		--instruction-set-variant=$($(PRIVATE_2ND_ARCH_VAR_PREFIX)DEX2OAT_TARGET_CPU_VARIANT) \
 		--instruction-set-features=$($(PRIVATE_2ND_ARCH_VAR_PREFIX)DEX2OAT_TARGET_INSTRUCTION_SET_FEATURES) \
 		--android-root=$(PRODUCT_OUT)/system \
-		--runtime-arg -Xnorelocate --compile-pic \
-		--no-generate-debug-info --generate-build-id \
-		--multi-image --no-inline-from=core-oj.jar \
+		--no-inline-from=core-oj.jar \
 		--abort-on-hard-verifier-error \
 		--abort-on-soft-verifier-error \
 		$(PRODUCT_DEX_PREOPT_BOOT_FLAGS) $(GLOBAL_DEXPREOPT_FLAGS) $(ART_BOOT_IMAGE_EXTRA_ARGS) \
-		|| ( echo "$(DEX2OAT_FAILURE_MESSAGE)" ; false ) && \
-	$(DEX2OAT_BOOT_IMAGE_LOG_TAGS) ANDROID_ROOT=$(PRODUCT_OUT)/system ANDROID_DATA=$(dir $@) $(PATCHOAT) \
-		--input-image-location=$(PRIVATE_IMAGE_LOCATION) \
-		--output-image-relocation-directory=$(dir $@) \
-		--instruction-set=$($(PRIVATE_2ND_ARCH_VAR_PREFIX)DEX2OAT_TARGET_ARCH) \
-		--base-offset-delta=0x10000000
+		|| ( echo "$(DEX2OAT_FAILURE_MESSAGE)" ; false )
 
 endif
diff --git a/core/dex_preopt_odex_install.mk b/core/dex_preopt_odex_install.mk
index ce91759..6a892e2 100644
--- a/core/dex_preopt_odex_install.mk
+++ b/core/dex_preopt_odex_install.mk
@@ -3,83 +3,111 @@
 # Output variables: LOCAL_DEX_PREOPT, LOCAL_UNCOMPRESS_DEX, built_odex,
 #                   dexpreopt_boot_jar_module
 
-# We explicitly uncompress APKs of privileged apps, and used by
-# privileged apps
-LOCAL_UNCOMPRESS_DEX := false
-ifneq (true,$(DONT_UNCOMPRESS_PRIV_APPS_DEXS))
-ifeq (true,$(LOCAL_PRIVILEGED_MODULE))
+ifeq (true,$(LOCAL_PREFER_INTEGRITY))
   LOCAL_UNCOMPRESS_DEX := true
 else
+  LOCAL_UNCOMPRESS_DEX :=
+endif
+
+# We explicitly uncompress APKs of privileged apps, and used by
+# privileged apps
+ifneq (true,$(DONT_UNCOMPRESS_PRIV_APPS_DEXS))
+  ifeq (true,$(LOCAL_PRIVILEGED_MODULE))
+    LOCAL_UNCOMPRESS_DEX := true
+  endif
+
   ifneq (,$(filter $(PRODUCT_LOADED_BY_PRIVILEGED_MODULES), $(LOCAL_MODULE)))
     LOCAL_UNCOMPRESS_DEX := true
-  endif  # PRODUCT_LOADED_BY_PRIVILEGED_MODULES
-endif  # LOCAL_PRIVILEGED_MODULE
+  endif
 endif  # DONT_UNCOMPRESS_PRIV_APPS_DEXS
 
 # Setting LOCAL_DEX_PREOPT based on WITH_DEXPREOPT, LOCAL_DEX_PREOPT, etc
 LOCAL_DEX_PREOPT := $(strip $(LOCAL_DEX_PREOPT))
-ifneq (true,$(WITH_DEXPREOPT))
-  LOCAL_DEX_PREOPT :=
-else # WITH_DEXPREOPT=true
-  ifeq (,$(TARGET_BUILD_APPS)) # TARGET_BUILD_APPS empty
-    ifndef LOCAL_DEX_PREOPT # LOCAL_DEX_PREOPT undefined
-      ifneq ($(filter $(TARGET_OUT)/%,$(my_module_path)),) # Installed to system.img.
-        ifeq (,$(LOCAL_APK_LIBRARIES)) # LOCAL_APK_LIBRARIES empty
-          # If we have product-specific config for this module?
-          ifeq (disable,$(DEXPREOPT.$(TARGET_PRODUCT).$(LOCAL_MODULE).CONFIG))
-            LOCAL_DEX_PREOPT := false
-          else
-            LOCAL_DEX_PREOPT := $(DEX_PREOPT_DEFAULT)
-          endif
-        else # LOCAL_APK_LIBRARIES not empty
-          LOCAL_DEX_PREOPT := nostripping
-        endif # LOCAL_APK_LIBRARIES not empty
-      endif # Installed to system.img.
-    endif # LOCAL_DEX_PREOPT undefined
-  endif # TARGET_BUILD_APPS empty
-endif # WITH_DEXPREOPT=true
+ifndef LOCAL_DEX_PREOPT # LOCAL_DEX_PREOPT undefined
+  LOCAL_DEX_PREOPT := $(DEX_PREOPT_DEFAULT)
+
+  ifeq ($(filter $(TARGET_OUT)/%,$(my_module_path)),) # Not installed to system.img.
+    # Default to nostripping for non system preopt (enables preopt).
+    # Don't strip in case the oat/vdex version in system ROM doesn't match the one in other
+    # partitions. It needs to be able to fall back to the APK for that case.
+    LOCAL_DEX_PREOPT := nostripping
+  endif
+
+  ifneq (,$(LOCAL_APK_LIBRARIES)) # LOCAL_APK_LIBRARIES not empty
+    LOCAL_DEX_PREOPT := nostripping
+  endif
+endif
+
+ifeq (nostripping,$(LOCAL_DEX_PREOPT))
+  LOCAL_DEX_PREOPT := true
+  LOCAL_STRIP_DEX :=
+else
+  LOCAL_STRIP_DEX := true
+endif
+
 ifeq (false,$(LOCAL_DEX_PREOPT))
   LOCAL_DEX_PREOPT :=
 endif
+
+# Only enable preopt for non tests.
+ifneq (,$(filter $(LOCAL_MODULE_TAGS),tests))
+  LOCAL_DEX_PREOPT :=
+endif
+
+# If we have product-specific config for this module?
+ifneq (,$(filter $(LOCAL_MODULE),$(DEXPREOPT_DISABLED_MODULES)))
+  LOCAL_DEX_PREOPT :=
+endif
+
+# Disable preopt for TARGET_BUILD_APPS
+ifneq (,$(TARGET_BUILD_APPS))
+  LOCAL_DEX_PREOPT :=
+endif
+
+# Disable preopt if not WITH_DEXPREOPT
+ifneq (true,$(WITH_DEXPREOPT))
+  LOCAL_DEX_PREOPT :=
+endif
+
 ifdef LOCAL_UNINSTALLABLE_MODULE
-LOCAL_DEX_PREOPT :=
+  LOCAL_DEX_PREOPT :=
 endif
+
 ifeq (,$(strip $(built_dex)$(my_prebuilt_src_file)$(LOCAL_SOONG_DEX_JAR))) # contains no java code
-LOCAL_DEX_PREOPT :=
+  LOCAL_DEX_PREOPT :=
 endif
+
 # if WITH_DEXPREOPT_BOOT_IMG_AND_SYSTEM_SERVER_ONLY=true and module is not in boot class path skip
 # Also preopt system server jars since selinux prevents system server from loading anything from
 # /data. If we don't do this they will need to be extracted which is not favorable for RAM usage
 # or performance. If my_preopt_for_extracted_apk is true, we ignore the only preopt boot image
 # options.
 ifneq (true,$(my_preopt_for_extracted_apk))
-ifeq (true,$(WITH_DEXPREOPT_BOOT_IMG_AND_SYSTEM_SERVER_ONLY))
-ifeq ($(filter $(PRODUCT_SYSTEM_SERVER_JARS) $(DEXPREOPT_BOOT_JARS_MODULES),$(LOCAL_MODULE)),)
-LOCAL_DEX_PREOPT :=
-endif
-endif
+  ifeq (true,$(WITH_DEXPREOPT_BOOT_IMG_AND_SYSTEM_SERVER_ONLY))
+    ifeq ($(filter $(PRODUCT_SYSTEM_SERVER_JARS) $(DEXPREOPT_BOOT_JARS_MODULES),$(LOCAL_MODULE)),)
+      LOCAL_DEX_PREOPT :=
+    endif
+  endif
 endif
 
 ifeq ($(LOCAL_DEX_PREOPT),true)
+  # Don't strip with dexes we explicitly uncompress (dexopt will not store the dex code).
+  ifeq ($(LOCAL_UNCOMPRESS_DEX),true)
+    LOCAL_STRIP_DEX :=
+  endif  # LOCAL_UNCOMPRESS_DEX
 
-# Don't strip with dexes we explicitly uncompress (dexopt will not store the dex code).
-ifeq ($(LOCAL_UNCOMPRESS_DEX),true)
-LOCAL_DEX_PREOPT := nostripping
-endif  # LOCAL_UNCOMPRESS_DEX
+  # system_other isn't there for an OTA, so don't strip
+  # if module is on system, and odex is on system_other.
+  ifeq ($(BOARD_USES_SYSTEM_OTHER_ODEX),true)
+    ifneq ($(call install-on-system-other, $(my_module_path)),)
+      LOCAL_STRIP_DEX :=
+    endif  # install-on-system-other
+  endif  # BOARD_USES_SYSTEM_OTHER_ODEX
 
-# system_other isn't there for an OTA, so don't strip
-# if module is on system, and odex is on system_other.
-ifeq ($(BOARD_USES_SYSTEM_OTHER_ODEX),true)
-ifneq ($(call install-on-system-other, $(my_module_path)),)
-LOCAL_DEX_PREOPT := nostripping
-endif  # install-on-system-other
-endif  # BOARD_USES_SYSTEM_OTHER_ODEX
-
-# We also don't strip if all dexs are uncompressed (dexopt will not store the dex code),
-# but that requires to inspect the source file, which is too early at this point (as we
-# don't know if the source file will actually be used).
-# See dexpreopt-remove-classes.dex.
-
+  # We also don't strip if all dexs are uncompressed (dexopt will not store the dex code),
+  # but that requires to inspect the source file, which is too early at this point (as we
+  # don't know if the source file will actually be used).
+  # See dexpreopt-remove-classes.dex.
 endif  # LOCAL_DEX_PREOPT
 
 built_odex :=
@@ -93,64 +121,64 @@
 built_installed_art :=
 my_process_profile :=
 my_profile_is_text_listing :=
+my_generate_dm :=
 
 ifeq (false,$(WITH_DEX_PREOPT_GENERATE_PROFILE))
-LOCAL_DEX_PREOPT_GENERATE_PROFILE := false
+  LOCAL_DEX_PREOPT_GENERATE_PROFILE := false
 endif
 
 ifndef LOCAL_DEX_PREOPT_GENERATE_PROFILE
+  # If LOCAL_DEX_PREOPT_GENERATE_PROFILE is not defined, default it based on the existence of the
+  # profile class listing. TODO: Use product specific directory here.
+  my_classes_directory := $(PRODUCT_DEX_PREOPT_PROFILE_DIR)
+  LOCAL_DEX_PREOPT_PROFILE := $(my_classes_directory)/$(LOCAL_MODULE).prof
 
-
-# If LOCAL_DEX_PREOPT_GENERATE_PROFILE is not defined, default it based on the existence of the
-# profile class listing. TODO: Use product specific directory here.
-my_classes_directory := $(PRODUCT_DEX_PREOPT_PROFILE_DIR)
-LOCAL_DEX_PREOPT_PROFILE := $(my_classes_directory)/$(LOCAL_MODULE).prof
-
-ifneq (,$(wildcard $(LOCAL_DEX_PREOPT_PROFILE)))
-my_process_profile := true
-my_profile_is_text_listing := false
-endif
+  ifneq (,$(wildcard $(LOCAL_DEX_PREOPT_PROFILE)))
+    my_process_profile := true
+    my_profile_is_text_listing := false
+  endif
 else
-my_process_profile := $(LOCAL_DEX_PREOPT_GENERATE_PROFILE)
-my_profile_is_text_listing := true
-LOCAL_DEX_PREOPT_PROFILE := $(LOCAL_DEX_PREOPT_PROFILE_CLASS_LISTING)
+  my_process_profile := $(LOCAL_DEX_PREOPT_GENERATE_PROFILE)
+  my_profile_is_text_listing := true
+  LOCAL_DEX_PREOPT_PROFILE := $(LOCAL_DEX_PREOPT_PROFILE_CLASS_LISTING)
 endif
 
 ifeq (true,$(my_process_profile))
 
-ifeq (,$(LOCAL_DEX_PREOPT_APP_IMAGE))
-LOCAL_DEX_PREOPT_APP_IMAGE := true
-endif
+  ifeq (,$(LOCAL_DEX_PREOPT_APP_IMAGE))
+    LOCAL_DEX_PREOPT_APP_IMAGE := true
+  endif
 
-ifndef LOCAL_DEX_PREOPT_PROFILE
-$(call pretty-error,Must have specified class listing (LOCAL_DEX_PREOPT_PROFILE))
-endif
-ifeq (,$(dex_preopt_profile_src_file))
-$(call pretty-error, Internal error: dex_preopt_profile_src_file must be set)
-endif
-my_built_profile := $(dir $(LOCAL_BUILT_MODULE))/profile.prof
-my_dex_location := $(patsubst $(PRODUCT_OUT)%,%,$(LOCAL_INSTALLED_MODULE))
-# Remove compressed APK extension.
-my_dex_location := $(patsubst %.gz,%,$(my_dex_location))
-$(my_built_profile): PRIVATE_BUILT_MODULE := $(dex_preopt_profile_src_file)
-$(my_built_profile): PRIVATE_DEX_LOCATION := $(my_dex_location)
-$(my_built_profile): PRIVATE_SOURCE_CLASSES := $(LOCAL_DEX_PREOPT_PROFILE)
-$(my_built_profile): $(LOCAL_DEX_PREOPT_PROFILE)
-$(my_built_profile): $(PROFMAN)
-$(my_built_profile): $(dex_preopt_profile_src_file)
-ifeq (true,$(my_profile_is_text_listing))
-# The profile is a test listing of classes (used for framework jars).
-# We need to generate the actual binary profile before being able to compile.
+  ifndef LOCAL_DEX_PREOPT_PROFILE
+    $(call pretty-error,Must have specified class listing (LOCAL_DEX_PREOPT_PROFILE))
+  endif
+  ifeq (,$(dex_preopt_profile_src_file))
+    $(call pretty-error, Internal error: dex_preopt_profile_src_file must be set)
+  endif
+  my_built_profile := $(dir $(LOCAL_BUILT_MODULE))/profile.prof
+  my_dex_location := $(patsubst $(PRODUCT_OUT)%,%,$(LOCAL_INSTALLED_MODULE))
+  # Remove compressed APK extension.
+  my_dex_location := $(patsubst %.gz,%,$(my_dex_location))
+  $(my_built_profile): PRIVATE_BUILT_MODULE := $(dex_preopt_profile_src_file)
+  $(my_built_profile): PRIVATE_DEX_LOCATION := $(my_dex_location)
+  $(my_built_profile): PRIVATE_SOURCE_CLASSES := $(LOCAL_DEX_PREOPT_PROFILE)
+  $(my_built_profile): $(LOCAL_DEX_PREOPT_PROFILE)
+  $(my_built_profile): $(PROFMAN)
+  $(my_built_profile): $(dex_preopt_profile_src_file)
+  ifeq (true,$(my_profile_is_text_listing))
+    # The profile is a test listing of classes (used for framework jars).
+    # We need to generate the actual binary profile before being able to compile.
+    $(my_built_profile):
 	$(hide) mkdir -p $(dir $@)
 	ANDROID_LOG_TAGS="*:e" $(PROFMAN) \
 		--create-profile-from=$(PRIVATE_SOURCE_CLASSES) \
 		--apk=$(PRIVATE_BUILT_MODULE) \
 		--dex-location=$(PRIVATE_DEX_LOCATION) \
 		--reference-profile-file=$@
-else
-# The profile is binary profile (used for apps). Run it through profman to
-# ensure the profile keys match the apk.
-$(my_built_profile):
+  else
+    # The profile is binary profile (used for apps). Run it through profman to
+    # ensure the profile keys match the apk.
+    $(my_built_profile):
 	$(hide) mkdir -p $(dir $@)
 	touch $@
 	ANDROID_LOG_TAGS="*:i" $(PROFMAN) \
@@ -160,232 +188,241 @@
 		--dex-location=$(PRIVATE_DEX_LOCATION) \
 		--reference-profile-file=$@ \
 	|| echo "Profile out of date for $(PRIVATE_BUILT_MODULE)"
-endif
+  endif
 
-my_profile_is_text_listing :=
-dex_preopt_profile_src_file :=
+  my_profile_is_text_listing :=
+  dex_preopt_profile_src_file :=
 
-# Remove compressed APK extension.
-my_installed_profile := $(patsubst %.gz,%,$(LOCAL_INSTALLED_MODULE)).prof
+  # Remove compressed APK extension.
+  my_installed_profile := $(patsubst %.gz,%,$(LOCAL_INSTALLED_MODULE)).prof
 
-# my_installed_profile := $(LOCAL_INSTALLED_MODULE).prof
-$(eval $(call copy-one-file,$(my_built_profile),$(my_installed_profile)))
-build_installed_profile:=$(my_built_profile):$(my_installed_profile)
+  # my_installed_profile := $(LOCAL_INSTALLED_MODULE).prof
+  $(eval $(call copy-one-file,$(my_built_profile),$(my_installed_profile)))
+  build_installed_profile:=$(my_built_profile):$(my_installed_profile)
 else
-build_installed_profile:=
-my_installed_profile :=
+  build_installed_profile:=
+  my_installed_profile :=
 endif
 
 ifdef LOCAL_DEX_PREOPT
 
-dexpreopt_boot_jar_module := $(filter $(DEXPREOPT_BOOT_JARS_MODULES),$(LOCAL_MODULE))
+  dexpreopt_boot_jar_module := $(filter $(DEXPREOPT_BOOT_JARS_MODULES),$(LOCAL_MODULE))
 
-# Filter org.apache.http.legacy.boot.
-ifeq ($(dexpreopt_boot_jar_module),org.apache.http.legacy.boot)
-dexpreopt_boot_jar_module :=
-endif
+  ifdef dexpreopt_boot_jar_module
+    # For libart, the boot jars' odex files are replaced by $(DEFAULT_DEX_PREOPT_INSTALLED_IMAGE).
+    # We use this installed_odex trick to get boot.art installed.
+    installed_odex := $(DEFAULT_DEX_PREOPT_INSTALLED_IMAGE)
+    # Append the odex for the 2nd arch if we have one.
+    installed_odex += $($(TARGET_2ND_ARCH_VAR_PREFIX)DEFAULT_DEX_PREOPT_INSTALLED_IMAGE)
+  else  # boot jar
+    ifeq ($(LOCAL_MODULE_CLASS),JAVA_LIBRARIES)
 
-ifdef dexpreopt_boot_jar_module
-# For libart, the boot jars' odex files are replaced by $(DEFAULT_DEX_PREOPT_INSTALLED_IMAGE).
-# We use this installed_odex trick to get boot.art installed.
-installed_odex := $(DEFAULT_DEX_PREOPT_INSTALLED_IMAGE)
-# Append the odex for the 2nd arch if we have one.
-installed_odex += $($(TARGET_2ND_ARCH_VAR_PREFIX)DEFAULT_DEX_PREOPT_INSTALLED_IMAGE)
-else  # boot jar
-ifeq ($(LOCAL_MODULE_CLASS),JAVA_LIBRARIES)
-# For a Java library, by default we build odex for both 1st arch and 2nd arch.
-# But it can be overridden with "LOCAL_MULTILIB := first".
-ifneq (,$(filter $(PRODUCT_SYSTEM_SERVER_JARS),$(LOCAL_MODULE)))
-# For system server jars, we build for only "first".
-my_module_multilib := first
-else
-my_module_multilib := $(LOCAL_MULTILIB)
-endif
-# #################################################
-# Odex for the 1st arch
-my_2nd_arch_prefix :=
-include $(BUILD_SYSTEM)/setup_one_odex.mk
-# #################################################
-# Odex for the 2nd arch
-ifdef TARGET_2ND_ARCH
-ifneq ($(TARGET_TRANSLATE_2ND_ARCH),true)
-ifneq (first,$(my_module_multilib))
-my_2nd_arch_prefix := $(TARGET_2ND_ARCH_VAR_PREFIX)
-include $(BUILD_SYSTEM)/setup_one_odex.mk
-endif  # my_module_multilib is not first.
-endif  # TARGET_TRANSLATE_2ND_ARCH not true
-endif  # TARGET_2ND_ARCH
-# #################################################
-else  # must be APPS
-# The preferred arch
-my_2nd_arch_prefix := $(LOCAL_2ND_ARCH_VAR_PREFIX)
-include $(BUILD_SYSTEM)/setup_one_odex.mk
-ifdef TARGET_2ND_ARCH
-ifeq ($(LOCAL_MULTILIB),both)
-# The non-preferred arch
-my_2nd_arch_prefix := $(if $(LOCAL_2ND_ARCH_VAR_PREFIX),,$(TARGET_2ND_ARCH_VAR_PREFIX))
-include $(BUILD_SYSTEM)/setup_one_odex.mk
-endif  # LOCAL_MULTILIB is both
-endif  # TARGET_2ND_ARCH
-endif  # LOCAL_MODULE_CLASS
-endif  # boot jar
+      my_module_multilib := $(LOCAL_MULTILIB)
+      # If the module is not an SDK library and it's a system server jar, only preopt the primary arch.
+      my_filtered_lib_name := $(patsubst %.impl,%,$(LOCAL_MODULE))
+      ifeq (,$(filter $(JAVA_SDK_LIBRARIES),$(my_filtered_lib_name)))
+        # For a Java library, by default we build odex for both 1st arch and 2nd arch.
+        # But it can be overridden with "LOCAL_MULTILIB := first".
+        ifneq (,$(filter $(PRODUCT_SYSTEM_SERVER_JARS),$(LOCAL_MODULE)))
+          # For system server jars, we build for only "first".
+          my_module_multilib := first
+        endif
+      endif
 
-built_odex := $(strip $(built_odex))
-built_vdex := $(strip $(built_vdex))
-built_art := $(strip $(built_art))
-installed_odex := $(strip $(installed_odex))
-installed_vdex := $(strip $(installed_vdex))
-installed_art := $(strip $(installed_art))
+      # Only preopt primary arch for translated arch since there is only an image there.
+      ifeq ($(TARGET_TRANSLATE_2ND_ARCH),true)
+        my_module_multilib := first
+      endif
 
-ifdef built_odex
-ifeq (true,$(my_process_profile))
-$(built_odex): $(my_built_profile)
-$(built_odex): PRIVATE_PROFILE_PREOPT_FLAGS := --profile-file=$(my_built_profile)
-else
-$(built_odex): PRIVATE_PROFILE_PREOPT_FLAGS :=
-endif
+      # #################################################
+      # Odex for the 1st arch
+      my_2nd_arch_prefix :=
+      include $(BUILD_SYSTEM)/setup_one_odex.mk
+      # #################################################
+      # Odex for the 2nd arch
+      ifdef TARGET_2ND_ARCH
+        ifneq ($(TARGET_TRANSLATE_2ND_ARCH),true)
+          ifneq (first,$(my_module_multilib))
+            my_2nd_arch_prefix := $(TARGET_2ND_ARCH_VAR_PREFIX)
+            include $(BUILD_SYSTEM)/setup_one_odex.mk
+          endif  # my_module_multilib is not first.
+        endif  # TARGET_TRANSLATE_2ND_ARCH not true
+      endif  # TARGET_2ND_ARCH
+      # #################################################
+    else  # must be APPS
+      # The preferred arch
+      my_2nd_arch_prefix := $(LOCAL_2ND_ARCH_VAR_PREFIX)
+      # Save the module multilib since setup_one_odex modifies it.
+      saved_my_module_multilib := $(my_module_multilib)
+      include $(BUILD_SYSTEM)/setup_one_odex.mk
+      my_module_multilib := $(saved_my_module_multilib)
+      ifdef TARGET_2ND_ARCH
+        ifeq ($(my_module_multilib),both)
+          # The non-preferred arch
+          my_2nd_arch_prefix := $(if $(LOCAL_2ND_ARCH_VAR_PREFIX),,$(TARGET_2ND_ARCH_VAR_PREFIX))
+          include $(BUILD_SYSTEM)/setup_one_odex.mk
+        endif  # LOCAL_MULTILIB is both
+      endif  # TARGET_2ND_ARCH
+    endif  # LOCAL_MODULE_CLASS
+  endif  # boot jar
 
-ifndef LOCAL_DEX_PREOPT_FLAGS
-LOCAL_DEX_PREOPT_FLAGS := $(DEXPREOPT.$(TARGET_PRODUCT).$(LOCAL_MODULE).CONFIG)
-ifndef LOCAL_DEX_PREOPT_FLAGS
-LOCAL_DEX_PREOPT_FLAGS := $(PRODUCT_DEX_PREOPT_DEFAULT_FLAGS)
-endif
-endif
+  built_odex := $(strip $(built_odex))
+  built_vdex := $(strip $(built_vdex))
+  built_art := $(strip $(built_art))
+  installed_odex := $(strip $(installed_odex))
+  installed_vdex := $(strip $(installed_vdex))
+  installed_art := $(strip $(installed_art))
 
-my_system_server_compiler_filter := $(PRODUCT_SYSTEM_SERVER_COMPILER_FILTER)
-ifeq (,$(my_system_server_compiler_filter))
-my_system_server_compiler_filter := speed
-endif
-
-my_default_compiler_filter := $(PRODUCT_DEX_PREOPT_DEFAULT_COMPILER_FILTER)
-ifeq (,$(my_default_compiler_filter))
-# If no default compiler filter is specified, default to 'quicken' to save on storage.
-my_default_compiler_filter := quicken
-endif
-
-ifeq (,$(filter --compiler-filter=%, $(LOCAL_DEX_PREOPT_FLAGS)))
-  ifneq (,$(filter $(PRODUCT_SYSTEM_SERVER_JARS),$(LOCAL_MODULE)))
-    # Jars of system server, use the product option if it is set, speed otherwise.
-    LOCAL_DEX_PREOPT_FLAGS += --compiler-filter=$(my_system_server_compiler_filter)
-  else
-    ifneq (,$(filter $(PRODUCT_DEXPREOPT_SPEED_APPS) $(PRODUCT_SYSTEM_SERVER_APPS),$(LOCAL_MODULE)))
-      # Apps loaded into system server, and apps the product default to being compiled with the
-      # 'speed' compiler filter.
-      LOCAL_DEX_PREOPT_FLAGS += --compiler-filter=speed
+  ifdef built_odex
+    ifeq (true,$(my_process_profile))
+      $(built_odex): $(my_built_profile)
+      $(built_odex): PRIVATE_PROFILE_PREOPT_FLAGS := --profile-file=$(my_built_profile)
     else
-      ifeq (true,$(my_process_profile))
-        # For non system server jars, use speed-profile when we have a profile.
-        LOCAL_DEX_PREOPT_FLAGS += --compiler-filter=speed-profile
-      else
-        LOCAL_DEX_PREOPT_FLAGS += --compiler-filter=$(my_default_compiler_filter)
+      $(built_odex): PRIVATE_PROFILE_PREOPT_FLAGS :=
+    endif
+
+    ifndef LOCAL_DEX_PREOPT_FLAGS
+      LOCAL_DEX_PREOPT_FLAGS := $(DEXPREOPT.$(TARGET_PRODUCT).$(LOCAL_MODULE).CONFIG)
+      ifndef LOCAL_DEX_PREOPT_FLAGS
+        LOCAL_DEX_PREOPT_FLAGS := $(PRODUCT_DEX_PREOPT_DEFAULT_FLAGS)
       endif
     endif
-  endif
-endif
 
-my_generate_dm := $(PRODUCT_DEX_PREOPT_GENERATE_DM_FILES)
-ifeq (,$(filter $(LOCAL_DEX_PREOPT_FLAGS),--compiler-filter=verify))
-# Generating DM files only makes sense for verify, avoid doing for non verify compiler filter APKs.
-my_generate_dm := false
-endif
+    my_system_server_compiler_filter := $(PRODUCT_SYSTEM_SERVER_COMPILER_FILTER)
+    ifeq (,$(my_system_server_compiler_filter))
+      my_system_server_compiler_filter := speed
+    endif
 
-# No reason to use a dm file if the dex is already uncompressed.
-ifeq ($(LOCAL_UNCOMPRESS_DEX),true)
-my_generate_dm := false
-endif
+    my_default_compiler_filter := $(PRODUCT_DEX_PREOPT_DEFAULT_COMPILER_FILTER)
+    ifeq (,$(my_default_compiler_filter))
+      # If no default compiler filter is specified, default to 'quicken' to save on storage.
+      my_default_compiler_filter := quicken
+    endif
 
-ifeq (true,$(my_generate_dm))
-LOCAL_DEX_PREOPT_FLAGS += --copy-dex-files=false
-LOCAL_DEX_PREOPT := nostripping
-my_built_dm := $(dir $(LOCAL_BUILT_MODULE))generated.dm
-my_installed_dm := $(patsubst %.apk,%,$(LOCAL_INSTALLED_MODULE)).dm
-my_copied_vdex := $(dir $(LOCAL_BUILT_MODULE))primary.vdex
-$(eval $(call copy-one-file,$(built_vdex),$(my_copied_vdex)))
-$(my_built_dm): PRIVATE_INPUT_VDEX := $(my_copied_vdex)
-$(my_built_dm): $(my_copied_vdex) $(ZIPTIME)
+    ifeq (,$(filter --compiler-filter=%, $(LOCAL_DEX_PREOPT_FLAGS)))
+      ifneq (,$(filter $(PRODUCT_SYSTEM_SERVER_JARS),$(LOCAL_MODULE)))
+        # Jars of system server, use the product option if it is set, speed otherwise.
+        LOCAL_DEX_PREOPT_FLAGS += --compiler-filter=$(my_system_server_compiler_filter)
+      else
+        ifneq (,$(filter $(PRODUCT_DEXPREOPT_SPEED_APPS) $(PRODUCT_SYSTEM_SERVER_APPS),$(LOCAL_MODULE)))
+          # Apps loaded into system server, and apps the product default to being compiled with the
+          # 'speed' compiler filter.
+          LOCAL_DEX_PREOPT_FLAGS += --compiler-filter=speed
+        else
+          ifeq (true,$(my_process_profile))
+            # For non system server jars, use speed-profile when we have a profile.
+            LOCAL_DEX_PREOPT_FLAGS += --compiler-filter=speed-profile
+          else
+            LOCAL_DEX_PREOPT_FLAGS += --compiler-filter=$(my_default_compiler_filter)
+          endif
+        endif
+      endif
+    endif
+
+    my_generate_dm := $(PRODUCT_DEX_PREOPT_GENERATE_DM_FILES)
+    ifeq (,$(filter $(LOCAL_DEX_PREOPT_FLAGS),--compiler-filter=verify))
+      # Generating DM files only makes sense for verify, avoid doing for non verify compiler filter APKs.
+      my_generate_dm := false
+    endif
+
+    # No reason to use a dm file if the dex is already uncompressed.
+    ifeq ($(LOCAL_UNCOMPRESS_DEX),true)
+      my_generate_dm := false
+    endif
+
+    ifeq (true,$(my_generate_dm))
+      LOCAL_DEX_PREOPT_FLAGS += --copy-dex-files=false
+      LOCAL_DEX_PREOPT := true
+      LOCAL_STRIP_DEX :=
+      my_built_dm := $(dir $(LOCAL_BUILT_MODULE))generated.dm
+      my_installed_dm := $(patsubst %.apk,%,$(LOCAL_INSTALLED_MODULE)).dm
+      my_copied_vdex := $(dir $(LOCAL_BUILT_MODULE))primary.vdex
+      $(eval $(call copy-one-file,$(built_vdex),$(my_copied_vdex)))
+      $(my_built_dm): PRIVATE_INPUT_VDEX := $(my_copied_vdex)
+      $(my_built_dm): $(my_copied_vdex) $(ZIPTIME)
 	$(hide) mkdir -p $(dir $@)
 	$(hide) rm -f $@
 	$(hide) zip -qD -j -X -9 $@ $(PRIVATE_INPUT_VDEX)
 	$(ZIPTIME) $@
-$(eval $(call copy-one-file,$(my_built_dm),$(my_installed_dm)))
-endif
+      $(eval $(call copy-one-file,$(my_built_dm),$(my_installed_dm)))
+    endif
 
-# By default, emit debug info.
-my_dexpreopt_debug_info := true
-# If the global setting suppresses mini-debug-info, disable it.
-ifeq (false,$(WITH_DEXPREOPT_DEBUG_INFO))
-  my_dexpreopt_debug_info := false
-endif
-
-# PRODUCT_SYSTEM_SERVER_DEBUG_INFO overrides WITH_DEXPREOPT_DEBUG_INFO.
-# PRODUCT_OTHER_JAVA_DEBUG_INFO overrides WITH_DEXPREOPT_DEBUG_INFO.
-ifneq (,$(filter $(PRODUCT_SYSTEM_SERVER_JARS),$(LOCAL_MODULE)))
-  ifeq (true,$(PRODUCT_SYSTEM_SERVER_DEBUG_INFO))
+    # By default, emit debug info.
     my_dexpreopt_debug_info := true
-  else ifeq (false,$(PRODUCT_SYSTEM_SERVER_DEBUG_INFO))
-    my_dexpreopt_debug_info := false
+    # If the global setting suppresses mini-debug-info, disable it.
+    ifeq (false,$(WITH_DEXPREOPT_DEBUG_INFO))
+      my_dexpreopt_debug_info := false
+    endif
+
+    # PRODUCT_SYSTEM_SERVER_DEBUG_INFO overrides WITH_DEXPREOPT_DEBUG_INFO.
+    # PRODUCT_OTHER_JAVA_DEBUG_INFO overrides WITH_DEXPREOPT_DEBUG_INFO.
+    ifneq (,$(filter $(PRODUCT_SYSTEM_SERVER_JARS),$(LOCAL_MODULE)))
+      ifeq (true,$(PRODUCT_SYSTEM_SERVER_DEBUG_INFO))
+        my_dexpreopt_debug_info := true
+      else ifeq (false,$(PRODUCT_SYSTEM_SERVER_DEBUG_INFO))
+        my_dexpreopt_debug_info := false
+      endif
+    else
+      ifeq (true,$(PRODUCT_OTHER_JAVA_DEBUG_INFO))
+        my_dexpreopt_debug_info := true
+      else ifeq (false,$(PRODUCT_OTHER_JAVA_DEBUG_INFO))
+        my_dexpreopt_debug_info := false
+      endif
+    endif
+
+    # Never enable on eng.
+    ifeq (eng,$(filter eng, $(TARGET_BUILD_VARIANT)))
+      my_dexpreopt_debug_info := false
+    endif
+
+    # Add dex2oat flag for debug-info/no-debug-info.
+    ifeq (true,$(my_dexpreopt_debug_info))
+      LOCAL_DEX_PREOPT_FLAGS += --generate-mini-debug-info
+    else ifeq (false,$(my_dexpreopt_debug_info))
+      LOCAL_DEX_PREOPT_FLAGS += --no-generate-mini-debug-info
+    endif
+
+    # Set the compiler reason to 'prebuilt' to identify the oat files produced
+    # during the build, as opposed to compiled on the device.
+    LOCAL_DEX_PREOPT_FLAGS += --compilation-reason=prebuilt
+
+    $(built_odex): PRIVATE_DEX_PREOPT_FLAGS := $(LOCAL_DEX_PREOPT_FLAGS)
+    $(built_vdex): $(built_odex)
+    $(built_art): $(built_odex)
   endif
-else
-  ifeq (true,$(PRODUCT_OTHER_JAVA_DEBUG_INFO))
-    my_dexpreopt_debug_info := true
-  else ifeq (false,$(PRODUCT_OTHER_JAVA_DEBUG_INFO))
-    my_dexpreopt_debug_info := false
+
+  ifneq (true,$(my_generate_dm))
+    # Add the installed_odex to the list of installed files for this module if we aren't generating a
+    # dm file.
+    ALL_MODULES.$(my_register_name).INSTALLED += $(installed_odex)
+    ALL_MODULES.$(my_register_name).INSTALLED += $(installed_vdex)
+    ALL_MODULES.$(my_register_name).INSTALLED += $(installed_art)
+
+    ALL_MODULES.$(my_register_name).BUILT_INSTALLED += $(built_installed_odex)
+    ALL_MODULES.$(my_register_name).BUILT_INSTALLED += $(built_installed_vdex)
+    ALL_MODULES.$(my_register_name).BUILT_INSTALLED += $(built_installed_art)
+
+    # Make sure to install the .odex and .vdex when you run "make <module_name>"
+    $(my_all_targets): $(installed_odex) $(installed_vdex) $(installed_art)
+  else
+    ALL_MODULES.$(my_register_name).INSTALLED += $(my_installed_dm)
+    ALL_MODULES.$(my_register_name).BUILT_INSTALLED += $(my_built_dm) $(my_installed_dm)
+
+    # Make sure to install the .dm when you run "make <module_name>"
+    $(my_all_targets): $(installed_dm)
   endif
-endif
 
-# Never enable on eng.
-ifeq (eng,$(filter eng, $(TARGET_BUILD_VARIANT)))
-my_dexpreopt_debug_info := false
-endif
-
-# Add dex2oat flag for debug-info/no-debug-info.
-ifeq (true,$(my_dexpreopt_debug_info))
-  LOCAL_DEX_PREOPT_FLAGS += --generate-mini-debug-info
-else ifeq (false,$(my_dexpreopt_debug_info))
-  LOCAL_DEX_PREOPT_FLAGS += --no-generate-mini-debug-info
-endif
-
-# Set the compiler reason to 'prebuilt' to identify the oat files produced
-# during the build, as opposed to compiled on the device.
-LOCAL_DEX_PREOPT_FLAGS += --compilation-reason=prebuilt
-
-$(built_odex): PRIVATE_DEX_PREOPT_FLAGS := $(LOCAL_DEX_PREOPT_FLAGS)
-$(built_vdex): $(built_odex)
-$(built_art): $(built_odex)
-endif
-
-ifneq (true,$(my_generate_dm))
-  # Add the installed_odex to the list of installed files for this module if we aren't generating a
-  # dm file.
-  ALL_MODULES.$(my_register_name).INSTALLED += $(installed_odex)
-  ALL_MODULES.$(my_register_name).INSTALLED += $(installed_vdex)
-  ALL_MODULES.$(my_register_name).INSTALLED += $(installed_art)
-
-  ALL_MODULES.$(my_register_name).BUILT_INSTALLED += $(built_installed_odex)
-  ALL_MODULES.$(my_register_name).BUILT_INSTALLED += $(built_installed_vdex)
-  ALL_MODULES.$(my_register_name).BUILT_INSTALLED += $(built_installed_art)
-
-  # Make sure to install the .odex and .vdex when you run "make <module_name>"
-  $(my_all_targets): $(installed_odex) $(installed_vdex) $(installed_art)
-else
-  ALL_MODULES.$(my_register_name).INSTALLED += $(my_installed_dm)
-  ALL_MODULES.$(my_register_name).BUILT_INSTALLED += $(my_built_dm) $(my_installed_dm)
-
-  # Make sure to install the .dm when you run "make <module_name>"
-  $(my_all_targets): $(installed_dm)
-endif
-
-# Record dex-preopt config.
-DEXPREOPT.$(LOCAL_MODULE).DEX_PREOPT := $(LOCAL_DEX_PREOPT)
-DEXPREOPT.$(LOCAL_MODULE).MULTILIB := $(LOCAL_MULTILIB)
-DEXPREOPT.$(LOCAL_MODULE).DEX_PREOPT_FLAGS := $(LOCAL_DEX_PREOPT_FLAGS)
-DEXPREOPT.$(LOCAL_MODULE).PRIVILEGED_MODULE := $(LOCAL_PRIVILEGED_MODULE)
-DEXPREOPT.$(LOCAL_MODULE).VENDOR_MODULE := $(LOCAL_VENDOR_MODULE)
-DEXPREOPT.$(LOCAL_MODULE).TARGET_ARCH := $(LOCAL_MODULE_TARGET_ARCH)
-DEXPREOPT.$(LOCAL_MODULE).INSTALLED := $(installed_odex)
-DEXPREOPT.$(LOCAL_MODULE).INSTALLED_STRIPPED := $(LOCAL_INSTALLED_MODULE)
-DEXPREOPT.MODULES.$(LOCAL_MODULE_CLASS) := $(sort \
-  $(DEXPREOPT.MODULES.$(LOCAL_MODULE_CLASS)) $(LOCAL_MODULE))
+  # Record dex-preopt config.
+  DEXPREOPT.$(LOCAL_MODULE).DEX_PREOPT := $(LOCAL_DEX_PREOPT)
+  DEXPREOPT.$(LOCAL_MODULE).MULTILIB := $(LOCAL_MULTILIB)
+  DEXPREOPT.$(LOCAL_MODULE).DEX_PREOPT_FLAGS := $(LOCAL_DEX_PREOPT_FLAGS)
+  DEXPREOPT.$(LOCAL_MODULE).PRIVILEGED_MODULE := $(LOCAL_PRIVILEGED_MODULE)
+  DEXPREOPT.$(LOCAL_MODULE).VENDOR_MODULE := $(LOCAL_VENDOR_MODULE)
+  DEXPREOPT.$(LOCAL_MODULE).TARGET_ARCH := $(LOCAL_MODULE_TARGET_ARCH)
+  DEXPREOPT.$(LOCAL_MODULE).INSTALLED := $(installed_odex)
+  DEXPREOPT.$(LOCAL_MODULE).INSTALLED_STRIPPED := $(LOCAL_INSTALLED_MODULE)
+  DEXPREOPT.MODULES.$(LOCAL_MODULE_CLASS) := $(sort \
+    $(DEXPREOPT.MODULES.$(LOCAL_MODULE_CLASS)) $(LOCAL_MODULE))
 
 endif # LOCAL_DEX_PREOPT
 
diff --git a/core/distdir.mk b/core/distdir.mk
index c074186..5f40407 100644
--- a/core/distdir.mk
+++ b/core/distdir.mk
@@ -17,52 +17,53 @@
 # When specifying "dist", the user has asked that we copy the important
 # files from this build into DIST_DIR.
 
-ifdef dist_goal
-
-# $(1): source file
-# $(2): destination file
-# $(3): goals that should copy the file
-#
-define copy-one-dist-file
-$(3): $(2)
-$(2): $(1)
-	@echo "Dist: $$@"
-	$$(copy-file-to-new-target-with-cp)
-endef
-
-# A global variable to remember all dist'ed src:dst pairs.
-# So if a src:dst is already dist'ed by another goal,
-# we should just establish the dependency and don't really call the
-# copy-one-dist-file to avoid multiple rules for the same target.
+# list of all goals that depend on any dist files
+_all_dist_goals :=
+# pairs of goal:distfile
+_all_dist_goal_output_pairs :=
+# pairs of srcfile:distfile
 _all_dist_src_dst_pairs :=
+
 # Other parts of the system should use this function to associate
 # certain files with certain goals.  When those goals are built
 # and "dist" is specified, the marked files will be copied to DIST_DIR.
 #
-# $(1): a list of goals  (e.g. droid, sdk, pdk, ndk)
+# $(1): a list of goals  (e.g. droid, sdk, pdk, ndk). These must be PHONY
 # $(2): the dist files to add to those goals.  If the file contains ':',
 #       the text following the colon is the name that the file is copied
 #       to under the dist directory.  Subdirs are ok, and will be created
 #       at copy time if necessary.
 define dist-for-goals
+$(if $(strip $(2)), \
+  $(eval _all_dist_goals += $$(1))) \
 $(foreach file,$(2), \
-  $(eval fw := $(subst :,$(space),$(file))) \
-  $(eval src := $(word 1,$(fw))) \
-  $(eval dst := $(word 2,$(fw))) \
-  $(eval dst := $(if $(dst),$(dst),$(notdir $(src)))) \
-  $(if $(filter $(_all_dist_src_dst_pairs),$(src):$(dst)),\
-    $(eval $(call add-dependency,$(1),$(DIST_DIR)/$(dst))),\
-    $(eval $(call copy-one-dist-file,\
-      $(src),$(DIST_DIR)/$(dst),$(1)))\
-      $(eval _all_dist_src_dst_pairs += $(src):$(dst))\
-  )\
-)
+  $(eval src := $(call word-colon,1,$(file))) \
+  $(eval dst := $(call word-colon,2,$(file))) \
+  $(if $(dst),,$(eval dst := $$(notdir $$(src)))) \
+  $(eval _all_dist_src_dst_pairs += $$(src):$$(dst)) \
+  $(foreach goal,$(1), \
+    $(eval _all_dist_goal_output_pairs += $$(goal):$$(dst))))
 endef
 
-else # !dist_goal
+#------------------------------------------------------------------
+# To be used at the end of the build to collect all the uses of
+# dist-for-goals, and write them into a file for the packaging step to use.
 
-# empty definition when not building dist
-define dist-for-goals
+# $(1): The file to write
+define dist-write-file
+$(strip \
+  $(KATI_obsolete_var dist-for-goals,Cannot be used after dist-write-file) \
+  $(foreach goal,$(sort $(_all_dist_goals)), \
+    $(eval $$(goal): _dist_$$(goal))) \
+  $(shell mkdir -p $(dir $(1))) \
+  $(file >$(1).tmp, \
+    DIST_GOAL_OUTPUT_PAIRS := $(sort $(_all_dist_goal_output_pairs)) \
+    $(newline)DIST_SRC_DST_PAIRS := $(sort $(_all_dist_src_dst_pairs))) \
+  $(shell if ! cmp -s $(1).tmp $(1); then \
+            mv $(1).tmp $(1); \
+          else \
+            rm $(1).tmp; \
+          fi))
 endef
 
-endif # !dist_goal
+.KATI_READONLY := dist-for-goals dist-write-file
diff --git a/core/dpi_specific_apk.mk b/core/dpi_specific_apk.mk
index f32daf5..88d2fe6 100644
--- a/core/dpi_specific_apk.mk
+++ b/core/dpi_specific_apk.mk
@@ -47,21 +47,24 @@
 $(built_dpi_apk) : $(all_library_res_package_export_deps)
 $(built_dpi_apk) : $(private_key) $(certificate) $(SIGNAPK_JAR)
 $(built_dpi_apk) : $(AAPT)
+$(built_dpi_apk) : $(MERGE_ZIPS) $(SOONG_ZIP) $(ZIP2ZIP)
 $(built_dpi_apk) : $(all_res_assets) $(jni_shared_libraries) $(full_android_manifest)
 	@echo "target Package: $(PRIVATE_MODULE) ($@)"
-	$(if $(PRIVATE_SOURCE_ARCHIVE),\
-	  $(call initialize-package-file,$(PRIVATE_SOURCE_ARCHIVE),$@),\
-	  $(create-empty-package))
-	$(add-assets-to-package)
+	rm -rf $@.parts
+	mkdir -p $@.parts
+	$(call create-assets-package,$@.parts/apk.zip)
 ifneq ($(jni_shared_libraries),)
-	$(add-jni-shared-libs-to-package)
+	$(call create-jni-shared-libs-package,$@.parts/jni.zip)
 endif
 ifeq ($(full_classes_jar),)
 # We don't build jar, need to add the Java resources here.
-	$(if $(PRIVATE_EXTRA_JAR_ARGS),$(call add-java-resources-to,$@))
+	$(if $(PRIVATE_EXTRA_JAR_ARGS),$(call create-java-resources-jar,$@.parts/res.zip))
 else
-	$(add-dex-to-package)
+	$(call create-dex-jar,$@.parts/dex.zip,$(PRIVATE_DEX_FILE))
+	$(call extract-resources-jar,$@.parts/res.zip,$(PRIVATE_SOURCE_ARCHIVE))
 endif
+	$(MERGE_ZIPS) $@ $@.parts/*.zip
+	rm -rf $@.parts
 	$(sign-package)
 
 # Set up global variables to register this apk to the higher-level dependency graph.
diff --git a/core/droiddoc.mk b/core/droiddoc.mk
deleted file mode 100644
index bcd2002..0000000
--- a/core/droiddoc.mk
+++ /dev/null
@@ -1,367 +0,0 @@
-#
-# Copyright (C) 2008 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-$(call record-module-type,DROIDDOC)
-###########################################################
-## Common logic to both droiddoc and javadoc
-###########################################################
-LOCAL_IS_HOST_MODULE := $(call true-or-empty,$(LOCAL_IS_HOST_MODULE))
-ifeq ($(LOCAL_IS_HOST_MODULE),true)
-my_prefix := HOST_
-LOCAL_HOST_PREFIX :=
-else
-my_prefix := TARGET_
-endif
-
-LOCAL_MODULE_CLASS := $(strip $(LOCAL_MODULE_CLASS))
-ifndef LOCAL_MODULE_CLASS
-$(error $(LOCAL_PATH): LOCAL_MODULE_CLASS not defined)
-endif
-
-full_src_files := $(patsubst %,$(LOCAL_PATH)/%,$(LOCAL_SRC_FILES))
-out_dir := $(OUT_DOCS)/$(LOCAL_MODULE)
-full_target := $(call doc-timestamp-for,$(LOCAL_MODULE))
-
-ifeq ($(LOCAL_DROIDDOC_SOURCE_PATH),)
-LOCAL_DROIDDOC_SOURCE_PATH := $(LOCAL_PATH)
-endif
-
-ifeq ($(LOCAL_DROIDDOC_CUSTOM_TEMPLATE_DIR),)
-LOCAL_DROIDDOC_CUSTOM_TEMPLATE_DIR := $(SRC_DROIDDOC_DIR)/$(LOCAL_DROIDDOC_CUSTOM_TEMPLATE_DIR)
-endif
-
-ifeq ($(LOCAL_DROIDDOC_ASSET_DIR),)
-LOCAL_DROIDDOC_ASSET_DIR := assets
-endif
-ifeq ($(LOCAL_DROIDDOC_CUSTOM_ASSET_DIR),)
-LOCAL_DROIDDOC_CUSTOM_ASSET_DIR := assets
-endif
-
-ifeq ($(LOCAL_IS_HOST_MODULE),true)
-
-$(full_target): PRIVATE_BOOTCLASSPATH :=
-full_java_libs := $(addprefix $(HOST_OUT_JAVA_LIBRARIES)/,\
-  $(addsuffix $(COMMON_JAVA_PACKAGE_SUFFIX),$(LOCAL_JAVA_LIBRARIES)))
-
-else
-
-ifneq ($(LOCAL_SDK_VERSION),)
-  ifeq ($(LOCAL_SDK_VERSION)$(TARGET_BUILD_APPS),current)
-    # Use android_stubs_current if LOCAL_SDK_VERSION is current and no TARGET_BUILD_APPS.
-    LOCAL_JAVA_LIBRARIES := android_stubs_current $(LOCAL_JAVA_LIBRARIES)
-    $(full_target): PRIVATE_BOOTCLASSPATH := $(call java-lib-files, android_stubs_current)
-  else ifeq ($(LOCAL_SDK_VERSION)$(TARGET_BUILD_APPS),system_current)
-    LOCAL_JAVA_LIBRARIES := android_system_stubs_current $(LOCAL_JAVA_LIBRARIES)
-    $(full_target): PRIVATE_BOOTCLASSPATH := $(call java-lib-files, android_system_stubs_current)
-  else ifeq ($(LOCAL_SDK_VERSION)$(TARGET_BUILD_APPS),test_current)
-    LOCAL_JAVA_LIBRARIES := android_test_stubs_current $(LOCAL_JAVA_LIBRARIES)
-    $(full_target): PRIVATE_BOOTCLASSPATH := $(call java-lib-files, android_test_stubs_current)
-  else ifeq ($(LOCAL_SDK_VERSION)$(TARGET_BUILD_APPS),core_current)
-    LOCAL_JAVA_LIBRARIES := core.current.stubs $(LOCAL_JAVA_LIBRARIES)
-    $(full_target): PRIVATE_BOOTCLASSPATH := $(call java-lib-files, core.current.stubs)
-  else
-    # core_<ver> is subset of <ver>. Instead of defining a prebuilt lib for core_<ver>,
-    # use the stub for <ver> when building for apps.
-    _version := $(patsubst core_%,%,$(LOCAL_SDK_VERSION))
-    LOCAL_JAVA_LIBRARIES := sdk_v$(_version) $(LOCAL_JAVA_LIBRARIES)
-    $(full_target): PRIVATE_BOOTCLASSPATH := $(call java-lib-files, sdk_v$(_version))
-    _version :=
-  endif
-else
-  ifeq ($(LOCAL_NO_STANDARD_LIBRARIES),true)
-    LOCAL_JAVA_LIBRARIES := core-oj core-libart
-  else
-    LOCAL_JAVA_LIBRARIES := core-oj core-libart ext framework $(LOCAL_JAVA_LIBRARIES)
-  endif
-  $(full_target): PRIVATE_BOOTCLASSPATH := $(call java-lib-files, core-oj):$(call java-lib-files, core-libart)
-endif  # LOCAL_SDK_VERSION
-LOCAL_JAVA_LIBRARIES := $(sort $(LOCAL_JAVA_LIBRARIES))
-
-full_java_libs := $(call java-lib-files,$(LOCAL_JAVA_LIBRARIES)) $(LOCAL_CLASSPATH)
-endif # !LOCAL_IS_HOST_MODULE
-
-$(full_target): PRIVATE_CLASSPATH := $(call normalize-path-list,$(full_java_libs))
-
-intermediates.COMMON := $(call local-intermediates-dir,COMMON)
-
-$(full_target): PRIVATE_SOURCE_PATH := $(call normalize-path-list,$(LOCAL_DROIDDOC_SOURCE_PATH))
-$(full_target): PRIVATE_JAVA_FILES := $(filter %.java,$(full_src_files))
-$(full_target): PRIVATE_JAVA_FILES += $(addprefix $($(my_prefix)OUT_COMMON_INTERMEDIATES)/, $(filter %.java,$(LOCAL_INTERMEDIATE_SOURCES)))
-$(full_target): PRIVATE_JAVA_FILES += $(filter %.java,$(LOCAL_GENERATED_SOURCES))
-$(full_target): PRIVATE_SRCJARS := $(LOCAL_SRCJARS)
-$(full_target): PRIVATE_SOURCE_INTERMEDIATES_DIR := $(intermediates.COMMON)/src
-$(full_target): PRIVATE_SRCJAR_INTERMEDIATES_DIR := $(intermediates.COMMON)/srcjars
-$(full_target): PRIVATE_SRC_LIST_FILE := $(intermediates.COMMON)/droiddoc-src-list
-$(full_target): PRIVATE_SRCJAR_LIST_FILE := $(intermediates.COMMON)/droiddoc-srcjar-list
-
-ifneq ($(strip $(LOCAL_ADDITIONAL_JAVA_DIR)),)
-$(full_target): PRIVATE_ADDITIONAL_JAVA_DIR := $(LOCAL_ADDITIONAL_JAVA_DIR)
-endif
-
-$(full_target): PRIVATE_OUT_DIR := $(out_dir)
-$(full_target): PRIVATE_DROIDDOC_OPTIONS := $(LOCAL_DROIDDOC_OPTIONS)
-$(full_target): PRIVATE_STUB_OUT_DIR := $(LOCAL_DROIDDOC_STUB_OUT_DIR)
-$(full_target): PRIVATE_METALAVA_DOCS_STUB_OUT_DIR := $(LOCAL_DROIDDOC_METALAVA_DOCS_STUB_OUT_DIR)
-
-# Lists the input files for the doc build into a text file
-# suitable for the @ syntax of javadoc.
-# $(1): the file to create
-# $(2): files to include
-# $(3): list of directories to search for java files in
-define prepare-doc-source-list
-$(hide) mkdir -p $(dir $(1))
-$(call dump-words-to-file, $(2), $(1))
-$(hide) for d in $(3) ; do find $$d -name '*.java' -and -not -name '.*' >> $(1) 2> /dev/null ; done ; true
-endef
-
-###########################################################
-## Logic for droiddoc only
-###########################################################
-ifneq ($(strip $(LOCAL_DROIDDOC_USE_STANDARD_DOCLET)),true)
-
-droiddoc_templates := \
-    $(sort $(shell find $(LOCAL_DROIDDOC_CUSTOM_TEMPLATE_DIR) -type f $(if $(ALLOW_MISSING_DEPENDENCIES),2>/dev/null)))
-
-ifdef ALLOW_MISSING_DEPENDENCIES
-  ifndef droiddoc_templates
-    droiddoc_templates := $(LOCAL_DROIDDOC_CUSTOM_TEMPLATE_DIR)
-  endif
-endif
-
-$(full_target): PRIVATE_DOCLETPATH := $(HOST_OUT_JAVA_LIBRARIES)/jsilver$(COMMON_JAVA_PACKAGE_SUFFIX):$(HOST_OUT_JAVA_LIBRARIES)/doclava$(COMMON_JAVA_PACKAGE_SUFFIX)
-$(full_target): PRIVATE_CURRENT_BUILD := -hdf page.build $(BUILD_ID)-$(BUILD_NUMBER_FROM_FILE)
-$(full_target): PRIVATE_CURRENT_TIME :=  -hdf page.now "$$($(DATE_FROM_FILE) "+%d %b %Y %k:%M")"
-$(full_target): PRIVATE_CUSTOM_TEMPLATE_DIR := $(LOCAL_DROIDDOC_CUSTOM_TEMPLATE_DIR)
-$(full_target): PRIVATE_IN_CUSTOM_ASSET_DIR := $(LOCAL_DROIDDOC_CUSTOM_TEMPLATE_DIR)/$(LOCAL_DROIDDOC_CUSTOM_ASSET_DIR)
-$(full_target): PRIVATE_OUT_ASSET_DIR := $(out_dir)/$(LOCAL_DROIDDOC_ASSET_DIR)
-$(full_target): PRIVATE_OUT_CUSTOM_ASSET_DIR := $(out_dir)/$(LOCAL_DROIDDOC_CUSTOM_ASSET_DIR)
-
-html_dir_files :=
-ifneq ($(strip $(LOCAL_DROIDDOC_HTML_DIR)),)
-$(full_target): PRIVATE_DROIDDOC_HTML_DIR := -htmldir $(LOCAL_PATH)/$(LOCAL_DROIDDOC_HTML_DIR)
-html_dir_files := $(sort $(shell find $(LOCAL_PATH)/$(LOCAL_DROIDDOC_HTML_DIR) -type f))
-else
-$(full_target): PRIVATE_DROIDDOC_HTML_DIR :=
-endif
-ifneq ($(strip $(LOCAL_ADDITIONAL_HTML_DIR)),)
-$(full_target): PRIVATE_ADDITIONAL_HTML_DIR := -htmldir2 $(LOCAL_PATH)/$(LOCAL_ADDITIONAL_HTML_DIR)
-else
-$(full_target): PRIVATE_ADDITIONAL_HTML_DIR :=
-endif
-
-# TODO(nanzhang): Remove it if this is not used any more
-$(full_target): PRIVATE_LOCAL_PATH := $(LOCAL_PATH)
-
-ifeq ($(strip $(LOCAL_DROIDDOC_USE_METALAVA)),true)
-ifneq ($(LOCAL_DROIDDOC_METALAVA_PREVIOUS_API),)
-$(full_target): PRIVATE_DROIDDOC_METALAVA_PREVIOUS_API := --previous-api $(LOCAL_DROIDDOC_METALAVA_PREVIOUS_API)
-else
-$(full_target): PRIVATE_DROIDDOC_METALAVA_PREVIOUS_API :=
-endif #!LOCAL_DROIDDOC_METALAVA_PREVIOUS_API
-
-metalava_annotations_deps :=
-ifeq ($(strip $(LOCAL_DROIDDOC_METALAVA_ANNOTATIONS_ENABLED)),true)
-ifeq ($(LOCAL_DROIDDOC_METALAVA_PREVIOUS_API),)
-$(error $(LOCAL_PATH): LOCAL_DROIDDOC_METALAVA_PREVIOUS_API has to be non-empty if metalava annotations was enabled!)
-endif
-ifeq ($(LOCAL_DROIDDOC_METALAVA_MERGE_ANNOTATIONS_DIR),)
-$(error $(LOCAL_PATH): LOCAL_DROIDDOC_METALAVA_MERGE_ANNOTATIONS_DIR has to be non-empty if metalava annotations was enabled!)
-endif
-
-$(full_target): PRIVATE_DROIDDOC_METALAVA_ANNOTATIONS := --include-annotations --migrate-nullness \
-    --extract-annotations $(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/$(LOCAL_MODULE)_annotations.zip \
-    --merge-annotations $(LOCAL_DROIDDOC_METALAVA_MERGE_ANNOTATIONS_DIR) \
-    --hide HiddenTypedefConstant --hide SuperfluousPrefix --hide AnnotationExtraction
-metalava_annotations_deps := $(sort $(shell find $(LOCAL_DROIDDOC_METALAVA_MERGE_ANNOTATIONS_DIR) -type f))
-else
-$(full_target): PRIVATE_DROIDDOC_METALAVA_ANNOTATIONS :=
-endif #LOCAL_DROIDDOC_METALAVA_ANNOTATIONS_ENABLED=true
-
-ifneq (,$(filter --generate-documentation,$(LOCAL_DROIDDOC_OPTIONS)))
-
-pos = $(if $(findstring $1,$2),$(call pos,$1,$(wordlist 2,$(words $2),$2),x $3),$3)
-metalava_args := $(wordlist 1, $(words $(call pos,--generate-documentation,$(LOCAL_DROIDDOC_OPTIONS))), \
-    $(LOCAL_DROIDDOC_OPTIONS))
-remaining_args :=  $(wordlist $(words $(call pos,--generate-documentation,$(LOCAL_DROIDDOC_OPTIONS))), \
-    $(words $(LOCAL_DROIDDOC_OPTIONS)), $(LOCAL_DROIDDOC_OPTIONS))
-doclava_args := $(wordlist 2, $(words $(remaining_args)), $(remaining_args))
-
-$(full_target): \
-        $(full_src_files) $(LOCAL_GENERATED_SOURCES) \
-        $(droiddoc_templates) \
-        $(HOST_JDK_TOOLS_JAR) \
-        $(HOST_OUT_JAVA_LIBRARIES)/jsilver$(COMMON_JAVA_PACKAGE_SUFFIX) \
-        $(HOST_OUT_JAVA_LIBRARIES)/doclava$(COMMON_JAVA_PACKAGE_SUFFIX) \
-        $(HOST_OUT_JAVA_LIBRARIES)/metalava$(COMMON_JAVA_PACKAGE_SUFFIX) \
-        $(html_dir_files) \
-        $(full_java_libs) \
-        $(ZIPSYNC) \
-        $(LOCAL_SRCJARS) \
-        $(LOCAL_ADDITIONAL_DEPENDENCIES) \
-        $(LOCAL_DROIDDOC_METALAVA_PREVIOUS_API) \
-        $(metalava_annotations_deps)
-	@echo metalava based docs: $(PRIVATE_OUT_DIR)
-	$(hide) mkdir -p $(dir $@)
-	$(hide) rm -rf $(PRIVATE_STUB_OUT_DIR)
-	$(hide) rm -rf $(PRIVATE_METALAVA_DOCS_STUB_OUT_DIR)
-	$(call prepare-doc-source-list,$(PRIVATE_SRC_LIST_FILE),$(PRIVATE_JAVA_FILES), \
-			$(PRIVATE_SOURCE_INTERMEDIATES_DIR) $(PRIVATE_ADDITIONAL_JAVA_DIR))
-	$(ZIPSYNC) -d $(PRIVATE_SRCJAR_INTERMEDIATES_DIR) -l $(PRIVATE_SRCJAR_LIST_FILE) -f "*.java" $(PRIVATE_SRCJARS)
-	$(hide) ( \
-		$(JAVA) -jar $(HOST_OUT_JAVA_LIBRARIES)/metalava$(COMMON_JAVA_PACKAGE_SUFFIX) \
-                -encoding UTF-8 -source 1.8 \@$(PRIVATE_SRC_LIST_FILE) \@$(PRIVATE_SRCJAR_LIST_FILE) \
-                $(addprefix -bootclasspath ,$(PRIVATE_BOOTCLASSPATH)) \
-                $(addprefix -classpath ,$(PRIVATE_CLASSPATH)) \
-                --sourcepath $(PRIVATE_SOURCE_PATH) \
-                --no-banner --color --quiet \
-                $(addprefix --stubs ,$(PRIVATE_STUB_OUT_DIR)) \
-                $(addprefix --doc-stubs ,$(PRIVATE_METALAVA_DOCS_STUB_OUT_DIR)) \
-                --write-stubs-source-list $(intermediates.COMMON)/stubs-src-list \
-                $(metalava_args) $(PRIVATE_DROIDDOC_METALAVA_PREVIOUS_API) $(PRIVATE_DROIDDOC_METALAVA_ANNOTATIONS) \
-                $(JAVADOC) -encoding UTF-8 -source 1.8 STUBS_SOURCE_LIST \
-                -J-Xmx1600m -J-XX:-OmitStackTraceInFastThrow -XDignore.symbol.file \
-                -quiet -doclet com.google.doclava.Doclava -docletpath $(PRIVATE_DOCLETPATH) \
-                -templatedir $(PRIVATE_CUSTOM_TEMPLATE_DIR) \
-                $(PRIVATE_DROIDDOC_HTML_DIR) $(PRIVATE_ADDITIONAL_HTML_DIR) \
-                $(addprefix -bootclasspath ,$(PRIVATE_BOOTCLASSPATH)) \
-                $(addprefix -classpath ,$(PRIVATE_CLASSPATH)) \
-                -sourcepath $(PRIVATE_SOURCE_PATH) \
-                -d $(PRIVATE_OUT_DIR) \
-                $(PRIVATE_CURRENT_BUILD) $(PRIVATE_CURRENT_TIME) $(doclava_args) \
-        && touch -f $@ ) || (rm -rf $(PRIVATE_OUT_DIR) $(PRIVATE_SRC_LIST_FILE); exit 45)
-else
-# no docs generation
-$(full_target): \
-        $(full_src_files) $(LOCAL_GENERATED_SOURCES) \
-        $(full_java_libs) \
-        $(HOST_OUT_JAVA_LIBRARIES)/metalava$(COMMON_JAVA_PACKAGE_SUFFIX) \
-        $(ZIPSYNC) \
-        $(LOCAL_SRCJARS) \
-        $(LOCAL_ADDITIONAL_DEPENDENCIES)
-	@echo metalava based stubs: $@
-	$(hide) mkdir -p $(dir $@)
-	$(hide) rm -rf $(PRIVATE_STUB_OUT_DIR)
-	$(call prepare-doc-source-list,$(PRIVATE_SRC_LIST_FILE),$(PRIVATE_JAVA_FILES), \
-			$(PRIVATE_SOURCE_INTERMEDIATES_DIR) $(PRIVATE_ADDITIONAL_JAVA_DIR))
-	$(ZIPSYNC) -d $(PRIVATE_SRCJAR_INTERMEDIATES_DIR) -l $(PRIVATE_SRCJAR_LIST_FILE) -f "*.java" $(PRIVATE_SRCJARS)
-	$(hide) ( \
-		$(JAVA) -jar $(HOST_OUT_JAVA_LIBRARIES)/metalava$(COMMON_JAVA_PACKAGE_SUFFIX) \
-                -encoding UTF-8 -source 1.8 \@$(PRIVATE_SRC_LIST_FILE) \@$(PRIVATE_SRCJAR_LIST_FILE) \
-                $(addprefix -bootclasspath ,$(PRIVATE_BOOTCLASSPATH)) \
-                $(addprefix -classpath ,$(PRIVATE_CLASSPATH)) \
-                --sourcepath $(PRIVATE_SOURCE_PATH) \
-                $(PRIVATE_DROIDDOC_OPTIONS) $(PRIVATE_DROIDDOC_METALAVA_PREVIOUS_API) $(PRIVATE_DROIDDOC_METALAVA_ANNOTATIONS) \
-                --no-banner --color --quiet \
-                $(addprefix --stubs ,$(PRIVATE_STUB_OUT_DIR)) \
-        && touch -f $@ ) || (rm -rf $(PRIVATE_SRC_LIST_FILE); exit 45)
-
-endif # stubs + docs generation
-ifeq ($(strip $(LOCAL_DROIDDOC_METALAVA_ANNOTATIONS_ENABLED)),true)
-$(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/$(LOCAL_MODULE)_annotations.zip: $(full_target)
-endif
-
-else # doclava based droiddoc generation
-
-# TODO(tobiast): Clean this up once we move to -source 1.9.
-# OpenJDK 9 does not have the concept of a "boot classpath" so we should
-# then rename PRIVATE_BOOTCLASSPATH to PRIVATE_MODULE or similar. For now,
-# keep -bootclasspath here since it works in combination with -source 1.8.
-$(full_target): \
-        $(full_src_files) $(LOCAL_GENERATED_SOURCES) \
-        $(droiddoc_templates) \
-        $(HOST_JDK_TOOLS_JAR) \
-        $(HOST_OUT_JAVA_LIBRARIES)/jsilver$(COMMON_JAVA_PACKAGE_SUFFIX) \
-        $(HOST_OUT_JAVA_LIBRARIES)/doclava$(COMMON_JAVA_PACKAGE_SUFFIX) \
-        $(html_dir_files) \
-        $(full_java_libs) \
-        $(ZIPSYNC) \
-        $(LOCAL_SRCJARS) \
-        $(LOCAL_ADDITIONAL_DEPENDENCIES)
-	@echo Docs droiddoc: $(PRIVATE_OUT_DIR)
-	$(hide) mkdir -p $(dir $@)
-	$(hide) rm -rf $(PRIVATE_STUB_OUT_DIR)
-	$(call prepare-doc-source-list,$(PRIVATE_SRC_LIST_FILE),$(PRIVATE_JAVA_FILES), \
-			$(PRIVATE_SOURCE_INTERMEDIATES_DIR) $(PRIVATE_ADDITIONAL_JAVA_DIR))
-	$(ZIPSYNC) -d $(PRIVATE_SRCJAR_INTERMEDIATES_DIR) -l $(PRIVATE_SRCJAR_LIST_FILE) -f "*.java" $(PRIVATE_SRCJARS)
-	$(hide) ( \
-		$(JAVADOC) \
-                -encoding UTF-8 -source 1.8 \@$(PRIVATE_SRC_LIST_FILE) \@$(PRIVATE_SRCJAR_LIST_FILE) \
-                -J-Xmx1600m -J-XX:-OmitStackTraceInFastThrow -XDignore.symbol.file \
-                -quiet -doclet com.google.doclava.Doclava -docletpath $(PRIVATE_DOCLETPATH) \
-                -templatedir $(PRIVATE_CUSTOM_TEMPLATE_DIR) \
-                $(PRIVATE_DROIDDOC_HTML_DIR) $(PRIVATE_ADDITIONAL_HTML_DIR) \
-                $(addprefix -bootclasspath ,$(PRIVATE_BOOTCLASSPATH)) \
-                $(addprefix -classpath ,$(PRIVATE_CLASSPATH)) \
-                -sourcepath $(PRIVATE_SOURCE_PATH)$(addprefix :,$(PRIVATE_CLASSPATH)) \
-                -d $(PRIVATE_OUT_DIR) \
-                $(PRIVATE_CURRENT_BUILD) $(PRIVATE_CURRENT_TIME) $(PRIVATE_DROIDDOC_OPTIONS) \
-                $(addprefix -stubs ,$(PRIVATE_STUB_OUT_DIR)) \
-        && touch -f $@ ) || (rm -rf $(PRIVATE_OUT_DIR) $(PRIVATE_SRC_LIST_FILE); exit 45)
-endif #LOCAL_DROIDDOC_USE_METALAVA
-
-else
-
-###########################################################
-## Logic for javadoc only
-###########################################################
-ifdef USE_OPENJDK9
-# For OpenJDK 9 we use --patch-module to define the core libraries code.
-# TODO(tobiast): Reorganize this when adding proper support for OpenJDK 9
-# modules. Here we treat all code in core libraries as being in java.base
-# to work around the OpenJDK 9 module system. http://b/62049770
-$(full_target): PRIVATE_BOOTCLASSPATH_ARG := --patch-module=java.base=$(PRIVATE_BOOTCLASSPATH)
-else
-# For OpenJDK 8 we can use -bootclasspath to define the core libraries code.
-$(full_target): PRIVATE_BOOTCLASSPATH_ARG := $(addprefix -bootclasspath ,$(PRIVATE_BOOTCLASSPATH))
-endif
-$(full_target): $(full_src_files) $(LOCAL_GENERATED_SOURCES) $(full_java_libs) $(ZIPSYNC) $(LOCAL_SRCJARS) $(LOCAL_ADDITIONAL_DEPENDENCIES)
-	@echo Docs javadoc: $(PRIVATE_OUT_DIR)
-	@mkdir -p $(dir $@)
-	$(call prepare-doc-source-list,$(PRIVATE_SRC_LIST_FILE),$(PRIVATE_JAVA_FILES), \
-			$(PRIVATE_SOURCE_INTERMEDIATES_DIR) $(PRIVATE_ADDITIONAL_JAVA_DIR))
-	$(ZIPSYNC) -d $(PRIVATE_SRCJAR_INTERMEDIATES_DIR) -l $(PRIVATE_SRCJAR_LIST_FILE) -f "*.java" $(PRIVATE_SRCJARS)
-	$(hide) ( \
-		$(JAVADOC) -encoding UTF-8 \@$(PRIVATE_SRC_LIST_FILE) \@$(PRIVATE_SRCJAR_LIST_FILE) \
-                $(PRIVATE_DROIDDOC_OPTIONS) -J-Xmx1024m -XDignore.symbol.file -Xdoclint:none -quiet \
-                $(addprefix -classpath ,$(PRIVATE_CLASSPATH)) $(PRIVATE_BOOTCLASSPATH_ARG) \
-                -sourcepath $(PRIVATE_SOURCE_PATH) \
-                -d $(PRIVATE_OUT_DIR) \
-        && touch -f $@ \
-    ) || (rm -rf $(PRIVATE_OUT_DIR) $(PRIVATE_SRC_LIST_FILE); exit 45)
-
-endif # !LOCAL_DROIDDOC_USE_STANDARD_DOCLET
-
-ALL_DOCS += $(full_target)
-
-.PHONY: $(LOCAL_MODULE)-docs
-$(LOCAL_MODULE)-docs : $(full_target)
-
-ifeq ($(strip $(LOCAL_UNINSTALLABLE_MODULE)),)
-
-# Define a rule to create a zip of these docs.
-out_zip := $(OUT_DOCS)/$(LOCAL_MODULE)-docs.zip
-$(out_zip): PRIVATE_DOCS_DIR := $(out_dir)
-$(out_zip): $(full_target)
-	@echo Package docs: $@
-	@rm -f $@
-	@mkdir -p $(dir $@)
-	$(hide) ( F=$$(pwd)/$@ ; cd $(PRIVATE_DOCS_DIR) && zip -rqX $$F * )
-
-$(LOCAL_MODULE)-docs.zip : $(out_zip)
-
-$(call dist-for-goals,docs,$(out_zip))
-
-endif #!LOCAL_UNINSTALLABLE_MODULE
diff --git a/core/dynamic_binary.mk b/core/dynamic_binary.mk
index f44b8a8..a42afe9 100644
--- a/core/dynamic_binary.mk
+++ b/core/dynamic_binary.mk
@@ -35,49 +35,11 @@
 LOCAL_INTERMEDIATE_TARGETS := $(linked_module)
 
 ###################################
+include $(BUILD_SYSTEM)/use_lld_setup.mk
 include $(BUILD_SYSTEM)/binary.mk
 ###################################
 
 ###########################################################
-## Pack relocation tables
-###########################################################
-relocation_packer_input := $(linked_module)
-relocation_packer_output := $(intermediates)/PACKED/$(my_built_module_stem)
-
-my_pack_module_relocations := false
-ifneq ($(DISABLE_RELOCATION_PACKER),true)
-    my_pack_module_relocations := $(firstword \
-      $(LOCAL_PACK_MODULE_RELOCATIONS_$($(my_prefix)$(LOCAL_2ND_ARCH_VAR_PREFIX)ARCH)) \
-      $(LOCAL_PACK_MODULE_RELOCATIONS))
-endif
-
-ifeq ($(my_pack_module_relocations),)
-  my_pack_module_relocations := $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_PACK_MODULE_RELOCATIONS)
-endif
-
-# Do not pack relocations for executables. Because packing results in
-# non-zero p_vaddr which causes kernel to load executables to lower
-# address (starting at 0x8000) http://b/20665974
-ifneq ($(filter EXECUTABLES NATIVE_TESTS,$(LOCAL_MODULE_CLASS)),)
-  my_pack_module_relocations := false
-endif
-
-# TODO (dimitry): Relocation packer is not yet available for darwin
-ifneq ($(HOST_OS),linux)
-  my_pack_module_relocations := false
-endif
-
-ifeq (true,$(my_pack_module_relocations))
-# Pack relocations
-$(relocation_packer_output): $(relocation_packer_input)
-	$(pack-elf-relocations)
-else
-$(relocation_packer_output): $(relocation_packer_input)
-	@echo "target Unpacked: $(PRIVATE_MODULE) ($@)"
-	$(copy-file-to-target)
-endif
-
-###########################################################
 ## Store a copy with symbols for symbolic debugging
 ###########################################################
 ifeq ($(LOCAL_UNSTRIPPED_PATH),)
@@ -85,7 +47,7 @@
 else
 my_unstripped_path := $(LOCAL_UNSTRIPPED_PATH)
 endif
-symbolic_input := $(relocation_packer_output)
+symbolic_input := $(linked_module)
 symbolic_output := $(my_unstripped_path)/$(my_installed_module_stem)
 $(symbolic_output) : $(symbolic_input)
 	@echo "target Symbolic: $(PRIVATE_MODULE) ($@)"
@@ -97,7 +59,7 @@
 
 ifeq ($(BREAKPAD_GENERATE_SYMBOLS),true)
 my_breakpad_path := $(TARGET_OUT_BREAKPAD)/$(patsubst $(PRODUCT_OUT)/%,%,$(my_module_path))
-breakpad_input := $(relocation_packer_output)
+breakpad_input := $(linked_module)
 breakpad_output := $(my_breakpad_path)/$(my_installed_module_stem).sym
 $(breakpad_output) : $(breakpad_input) | $(BREAKPAD_DUMP_SYMS) $(PRIVATE_READELF)
 	@echo "target breakpad: $(PRIVATE_MODULE) ($@)"
@@ -124,50 +86,49 @@
   my_strip_module := mini-debug-info
 endif
 
-ifeq ($(my_strip_module),mini-debug-info)
-# Don't use mini-debug-info on mips (both 32-bit and 64-bit). objcopy checks that all
-# SH_MIPS_DWARF sections having name prefix .debug_ or .zdebug_, so there seems no easy
-# way using objcopy to remove all debug sections except .debug_frame on mips.
-ifneq ($(filter mips mips64,$($(my_prefix)$(LOCAL_2ND_ARCH_VAR_PREFIX)ARCH)),)
-  my_strip_module := true
-endif
+ifeq ($(my_strip_module),false)
+  my_strip_module :=
 endif
 
-$(strip_output): PRIVATE_STRIP := $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_STRIP)
-$(strip_output): PRIVATE_OBJCOPY := $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_OBJCOPY)
-$(strip_output): PRIVATE_NM := $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_NM)
-$(strip_output): PRIVATE_READELF := $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_READELF)
-ifeq ($(my_strip_module),no_debuglink)
-$(strip_output): PRIVATE_NO_DEBUGLINK := true
-else
-$(strip_output): PRIVATE_NO_DEBUGLINK :=
-endif
-
+my_strip_args :=
 ifeq ($(my_strip_module),mini-debug-info)
-# Strip the binary, but keep debug frames and symbol table in a compressed .gnu_debugdata section.
-$(strip_output): $(strip_input) | $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_STRIP) $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_OBJCOPY) $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_NM)
-	$(transform-to-stripped-keep-mini-debug-info)
-else ifneq ($(filter true no_debuglink,$(my_strip_module)),)
-# Strip the binary
-$(strip_output): $(strip_input) | $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_STRIP)
-	$(transform-to-stripped)
+  my_strip_args += --keep-mini-debug-info
 else ifeq ($(my_strip_module),keep_symbols)
-# Strip only the debug frames, but leave the symbol table.
-$(strip_output): $(strip_input) | $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_STRIP)
-	$(transform-to-stripped-keep-symbols)
-
-# A product may be configured to strip everything in some build variants.
-# We do the stripping as a post-install command so that LOCAL_BUILT_MODULE
-# is still with the symbols and we don't need to clean it (and relink) when
-# you switch build variant.
-ifneq ($(filter $(STRIP_EVERYTHING_BUILD_VARIANTS),$(TARGET_BUILD_VARIANT)),)
-$(LOCAL_INSTALLED_MODULE): PRIVATE_POST_INSTALL_CMD := \
-  $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_STRIP) --strip-all $(LOCAL_INSTALLED_MODULE)
+  my_strip_args += --keep-symbols
 endif
+
+ifeq (,$(filter no_debuglink mini-debug-info,$(my_strip_module)))
+  ifneq ($(TARGET_BUILD_VARIANT),user)
+    my_strip_args += --add-gnu-debuglink
+  endif
+endif
+
+ifeq ($(my_use_clang_lld),true)
+  # b/80093681: GNU strip and objcopy --{add,remove}-section have bug in handling
+  # GNU_RELRO segment of files lnked by clang lld; so they are replaced
+  # by llvm-strip and llvm-objcopy here.
+  my_strip_args += --use-llvm-strip
+endif
+
+valid_strip := mini-debug-info keep_symbols true no_debuglink
+ifneq (,$(filter-out $(valid_strip),$(my_strip_module)))
+  $(call pretty-error,Invalid strip value $(my_strip_module), only one of $(valid_strip) allowed)
+endif
+
+ifneq (,$(my_strip_module))
+  $(strip_output): PRIVATE_STRIP_ARGS := $(my_strip_args)
+  $(strip_output): PRIVATE_TOOLS_PREFIX := $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)TOOLS_PREFIX)
+  $(strip_output): $(strip_input) $(SOONG_STRIP_PATH)
+	@echo "$($(PRIVATE_PREFIX)DISPLAY) Strip: $(PRIVATE_MODULE) ($@)"
+	CLANG_BIN=$(LLVM_PREBUILTS_PATH) \
+	CROSS_COMPILE=$(PRIVATE_TOOLS_PREFIX) \
+	XZ=$(XZ) \
+	$(SOONG_STRIP_PATH) -i $< -o $@ -d $@.d $(PRIVATE_STRIP_ARGS)
+  $(call include-depfile,$(strip_output).d)
 else
-# Don't strip the binary, just copy it.  We can't skip this step
-# because a copy of the binary must appear at LOCAL_BUILT_MODULE.
-$(strip_output): $(strip_input)
+  # Don't strip the binary, just copy it.  We can't skip this step
+  # because a copy of the binary must appear at LOCAL_BUILT_MODULE.
+  $(strip_output): $(strip_input)
 	@echo "target Unstripped: $(PRIVATE_MODULE) ($@)"
 	$(copy-file-to-target)
 endif # my_strip_module
diff --git a/core/envsetup.mk b/core/envsetup.mk
index 700189e..f5babb6 100644
--- a/core/envsetup.mk
+++ b/core/envsetup.mk
@@ -147,6 +147,11 @@
 endif
 endif
 
+ifeq ($(HOST_OS),darwin)
+  # Mac no longer supports 32-bit executables
+  HOST_2ND_ARCH :=
+endif
+
 BUILD_ARCH := $(HOST_ARCH)
 BUILD_2ND_ARCH := $(HOST_2ND_ARCH)
 
@@ -178,42 +183,30 @@
 TARGET_COPY_OUT_DATA := data
 TARGET_COPY_OUT_ASAN := $(TARGET_COPY_OUT_DATA)/asan
 TARGET_COPY_OUT_OEM := oem
-TARGET_COPY_OUT_ODM := odm
-TARGET_COPY_OUT_PRODUCT := product
+TARGET_COPY_OUT_RAMDISK := ramdisk
 TARGET_COPY_OUT_ROOT := root
 TARGET_COPY_OUT_RECOVERY := recovery
+# The directory used for optional partitions depend on the BoardConfig, so
+# they're defined to placeholder values here and swapped after reading the
+# BoardConfig, to be either the partition dir, or a subdir within 'system'.
+_vendor_path_placeholder := ||VENDOR-PATH-PH||
+_product_path_placeholder := ||PRODUCT-PATH-PH||
+_product_services_path_placeholder := ||PRODUCT_SERVICES-PATH-PH||
+_odm_path_placeholder := ||ODM-PATH-PH||
+TARGET_COPY_OUT_VENDOR := $(_vendor_path_placeholder)
+TARGET_COPY_OUT_PRODUCT := $(_product_path_placeholder)
+TARGET_COPY_OUT_PRODUCT_SERVICES := $(_product_services_path_placeholder)
+TARGET_COPY_OUT_ODM := $(_odm_path_placeholder)
 
 # Returns the non-sanitized version of the path provided in $1.
 define get_non_asan_path
 $(patsubst $(PRODUCT_OUT)/$(TARGET_COPY_OUT_ASAN)/%,$(PRODUCT_OUT)/%,$1)
 endef
 
-###########################################
-# Define TARGET_COPY_OUT_VENDOR to a placeholder, for at this point
-# we don't know if the device wants to build a separate vendor.img
-# or just build vendor stuff into system.img.
-# A device can set up TARGET_COPY_OUT_VENDOR to "vendor" in its
-# BoardConfig.mk.
-# We'll substitute with the real value after loading BoardConfig.mk.
-_vendor_path_placeholder := ||VENDOR-PATH-PH||
-TARGET_COPY_OUT_VENDOR := $(_vendor_path_placeholder)
-###########################################
-
-###########################################
-# Define TARGET_COPY_OUT_PRODUCT to a placeholder, for at this point
-# we don't know if the device wants to build a separate product.img
-# or just build product stuff into system.img.
-# A device can set up TARGET_COPY_OUT_PRODUCT to "product" in its
-# BoardConfig.mk.
-# We'll substitute with the real value after loading BoardConfig.mk.
-_product_path_placeholder := ||PRODUCT-PATH-PH||
-TARGET_COPY_OUT_PRODUCT := $(_product_path_placeholder)
-###########################################
-
 #################################################################
 # Set up minimal BOOTCLASSPATH list of jars to build/execute
 # java code with dalvikvm/art.
-TARGET_CORE_JARS := core-oj core-libart conscrypt okhttp bouncycastle apache-xml
+TARGET_CORE_JARS := core-oj core-libart core-simple conscrypt okhttp bouncycastle apache-xml
 ifeq ($(EMMA_INSTRUMENT),true)
   ifneq ($(EMMA_INSTRUMENT_STATIC),true)
     # For instrumented build, if Jacoco is not being included statically
@@ -241,17 +234,26 @@
 # or under vendor/*/$(TARGET_DEVICE).  Search in both places, but
 # make sure only one exists.
 # Real boards should always be associated with an OEM vendor.
-board_config_mk := \
-	$(strip $(sort $(wildcard \
-		$(SRC_TARGET_DIR)/board/$(TARGET_DEVICE)/BoardConfig.mk \
-		$(shell test -d device && find -L device -maxdepth 4 -path '*/$(TARGET_DEVICE)/BoardConfig.mk') \
-		$(shell test -d vendor && find -L vendor -maxdepth 4 -path '*/$(TARGET_DEVICE)/BoardConfig.mk') \
-	)))
-ifeq ($(board_config_mk),)
-  $(error No config file found for TARGET_DEVICE $(TARGET_DEVICE))
-endif
-ifneq ($(words $(board_config_mk)),1)
-  $(error Multiple board config files for TARGET_DEVICE $(TARGET_DEVICE): $(board_config_mk))
+ifdef TARGET_DEVICE_DIR
+  ifneq ($(origin TARGET_DEVICE_DIR),command line)
+    $(error TARGET_DEVICE_DIR may not be set manually)
+  endif
+  board_config_mk := $(TARGET_DEVICE_DIR)/BoardConfig.mk
+else
+  board_config_mk := \
+    $(strip $(sort $(wildcard \
+      $(SRC_TARGET_DIR)/board/$(TARGET_DEVICE)/BoardConfig.mk \
+      $(shell test -d device && find -L device -maxdepth 4 -path '*/$(TARGET_DEVICE)/BoardConfig.mk') \
+      $(shell test -d vendor && find -L vendor -maxdepth 4 -path '*/$(TARGET_DEVICE)/BoardConfig.mk') \
+    )))
+  ifeq ($(board_config_mk),)
+    $(error No config file found for TARGET_DEVICE $(TARGET_DEVICE))
+  endif
+  ifneq ($(words $(board_config_mk)),1)
+    $(error Multiple board config files for TARGET_DEVICE $(TARGET_DEVICE): $(board_config_mk))
+  endif
+  TARGET_DEVICE_DIR := $(patsubst %/,%,$(dir $(board_config_mk)))
+  .KATI_READONLY := TARGET_DEVICE_DIR
 endif
 include $(board_config_mk)
 ifeq ($(TARGET_ARCH),)
@@ -261,10 +263,39 @@
   $(warning *** Unsupported option MALLOC_IMPL defined by board config: $(board_config_mk).)
   $(error Use `MALLOC_SVELTE := true` to configure jemalloc for low-memory)
 endif
-TARGET_DEVICE_DIR := $(patsubst %/,%,$(dir $(board_config_mk)))
 board_config_mk :=
 
 ###########################################
+# Handle BUILD_BROKEN_* settings
+vars := \
+  BUILD_BROKEN_ANDROIDMK_EXPORTS \
+  BUILD_BROKEN_DUP_COPY_HEADERS \
+  BUILD_BROKEN_DUP_RULES \
+  BUILD_BROKEN_PHONY_TARGETS
+
+$(foreach var,$(vars),$(eval $(var) := $$(strip $$($(var)))))
+
+$(foreach var,$(vars), \
+  $(if $(filter-out true false,$($(var))), \
+    $(error Valid values of $(var) are "true", "false", and "". Not "$($(var))")))
+
+.KATI_READONLY := $(vars)
+
+CHANGES_URL := https://android.googlesource.com/platform/build/+/master/Changes.md
+
+ifneq ($(BUILD_BROKEN_ANDROIDMK_EXPORTS),true)
+$(KATI_obsolete_export It is a global setting. See $(CHANGES_URL)#export_keyword)
+endif
+
+CHANGES_URL :=
+
+###########################################
+# Now we can substitute with the real value of TARGET_COPY_OUT_RAMDISK
+ifeq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true)
+TARGET_COPY_OUT_RAMDISK := $(TARGET_COPY_OUT_ROOT)
+endif
+
+###########################################
 # Now we can substitute with the real value of TARGET_COPY_OUT_VENDOR
 ifeq ($(TARGET_COPY_OUT_VENDOR),$(_vendor_path_placeholder))
 TARGET_COPY_OUT_VENDOR := system/vendor
@@ -309,6 +340,50 @@
 endif
 
 ###########################################
+# Now we can substitute with the real value of TARGET_COPY_OUT_PRODUCT_SERVICES
+ifeq ($(TARGET_COPY_OUT_PRODUCT_SERVICES),$(_product_services_path_placeholder))
+TARGET_COPY_OUT_PRODUCT_SERVICES := system/product_services
+else ifeq ($(filter product_services system/product_services,$(TARGET_COPY_OUT_PRODUCT_SERVICES)),)
+$(error TARGET_COPY_OUT_PRODUCT_SERVICES must be either 'product_services' or 'system/product_services', seeing '$(TARGET_COPY_OUT_PRODUCT_SERVICES)'.)
+endif
+PRODUCT_COPY_FILES := $(subst $(_product_services_path_placeholder),$(TARGET_COPY_OUT_PRODUCT_SERVICES),$(PRODUCT_COPY_FILES))
+
+BOARD_USES_PRODUCT_SERVICESIMAGE :=
+ifdef BOARD_PREBUILT_PRODUCT_SERVICESIMAGE
+BOARD_USES_PRODUCT_SERVICESIMAGE := true
+endif
+ifdef BOARD_PRODUCT_SERVICESIMAGE_FILE_SYSTEM_TYPE
+BOARD_USES_PRODUCT_SERVICESIMAGE := true
+endif
+ifeq ($(TARGET_COPY_OUT_PRODUCT_SERVICES),product_services)
+BOARD_USES_PRODUCT_SERVICESIMAGE := true
+else ifdef BOARD_USES_PRODUCT_SERVICESIMAGE
+$(error TARGET_COPY_OUT_PRODUCT_SERVICES must be set to 'product_services' to use a product_services image)
+endif
+
+###########################################
+# Now we can substitute with the real value of TARGET_COPY_OUT_ODM
+ifeq ($(TARGET_COPY_OUT_ODM),$(_odm_path_placeholder))
+TARGET_COPY_OUT_ODM := vendor/odm
+else ifeq ($(filter odm vendor/odm,$(TARGET_COPY_OUT_ODM)),)
+$(error TARGET_COPY_OUT_ODM must be either 'odm' or 'vendor/odm', seeing '$(TARGET_COPY_OUT_ODM)'.)
+endif
+PRODUCT_COPY_FILES := $(subst $(_odm_path_placeholder),$(TARGET_COPY_OUT_ODM),$(PRODUCT_COPY_FILES))
+
+BOARD_USES_ODMIMAGE :=
+ifdef BOARD_PREBUILT_ODMIMAGE
+BOARD_USES_ODMIMAGE := true
+endif
+ifdef BOARD_ODMIMAGE_FILE_SYSTEM_TYPE
+BOARD_USES_ODMIMAGE := true
+endif
+ifeq ($(TARGET_COPY_OUT_ODM),odm)
+BOARD_USES_ODMIMAGE := true
+else ifdef BOARD_USES_ODMIMAGE
+$(error TARGET_COPY_OUT_ODM must be set to 'odm' to use an odm image)
+endif
+
+###########################################
 # Ensure that only TARGET_RECOVERY_UPDATER_LIBS *or* AB_OTA_UPDATER is set.
 TARGET_RECOVERY_UPDATER_LIBS ?=
 AB_OTA_UPDATER ?=
@@ -335,9 +410,11 @@
   TARGET_VENDOR_TEST_SUFFIX :=
 endif
 
+ifeq (,$(TARGET_BUILD_APPS))
 ifdef PRODUCT_EXTRA_VNDK_VERSIONS
   $(foreach v,$(PRODUCT_EXTRA_VNDK_VERSIONS),$(call check_vndk_version,$(v)))
 endif
+endif
 
 # Ensure that BOARD_SYSTEMSDK_VERSIONS are all within PLATFORM_SYSTEMSDK_VERSIONS
 _unsupported_systemsdk_versions := $(filter-out $(PLATFORM_SYSTEMSDK_VERSIONS),$(BOARD_SYSTEMSDK_VERSIONS))
@@ -366,28 +443,22 @@
 # ---------------------------------------------------------------
 # figure out the output directories
 
-ifeq (,$(strip $(OUT_DIR)))
-ifeq (,$(strip $(OUT_DIR_COMMON_BASE)))
-OUT_DIR := $(TOPDIR)out
-else
-OUT_DIR := $(OUT_DIR_COMMON_BASE)/$(notdir $(PWD))
-endif
-endif
-
 SOONG_OUT_DIR := $(OUT_DIR)/soong
 
 TARGET_OUT_ROOT := $(OUT_DIR)/target
 
 HOST_OUT_ROOT := $(OUT_DIR)/host
 
+.KATI_READONLY := SOONG_OUT_DIR TARGET_OUT_ROOT HOST_OUT_ROOT
+
 # We want to avoid two host bin directories in multilib build.
 HOST_OUT := $(HOST_OUT_ROOT)/$(HOST_OS)-$(HOST_PREBUILT_ARCH)
 SOONG_HOST_OUT := $(SOONG_OUT_DIR)/host/$(HOST_OS)-$(HOST_PREBUILT_ARCH)
-# TODO: remove
-BUILD_OUT := $(HOST_OUT)
 
 HOST_CROSS_OUT := $(HOST_OUT_ROOT)/windows-$(HOST_PREBUILT_ARCH)
 
+.KATI_READONLY := HOST_OUT SOONG_HOST_OUT HOST_CROSS_OUT
+
 TARGET_PRODUCT_OUT_ROOT := $(TARGET_OUT_ROOT)/product
 
 TARGET_COMMON_OUT_ROOT := $(TARGET_OUT_ROOT)/common
@@ -395,11 +466,17 @@
 
 PRODUCT_OUT := $(TARGET_PRODUCT_OUT_ROOT)/$(TARGET_DEVICE)
 
+.KATI_READONLY := TARGET_PRODUCT_OUT_ROOT TARGET_COMMON_OUT_ROOT HOST_COMMON_OUT_ROOT PRODUCT_OUT
+
 OUT_DOCS := $(TARGET_COMMON_OUT_ROOT)/docs
 OUT_NDK_DOCS := $(TARGET_COMMON_OUT_ROOT)/ndk-docs
+.KATI_READONLY := OUT_DOCS OUT_NDK_DOCS
 
-BUILD_OUT_EXECUTABLES := $(BUILD_OUT)/bin
+$(call KATI_obsolete,BUILD_OUT,Use HOST_OUT instead)
+
+BUILD_OUT_EXECUTABLES := $(HOST_OUT)/bin
 SOONG_HOST_OUT_EXECUTABLES := $(SOONG_HOST_OUT)/bin
+.KATI_READONLY := BUILD_OUT_EXECUTABLES SOONG_HOST_OUT_EXECUTABLES
 
 HOST_OUT_EXECUTABLES := $(HOST_OUT)/bin
 HOST_OUT_SHARED_LIBRARIES := $(HOST_OUT)/lib64
@@ -409,56 +486,97 @@
 HOST_OUT_NATIVE_TESTS := $(HOST_OUT)/nativetest64
 HOST_OUT_COVERAGE := $(HOST_OUT)/coverage
 HOST_OUT_TESTCASES := $(HOST_OUT)/testcases
+.KATI_READONLY := \
+  HOST_OUT_EXECUTABLES \
+  HOST_OUT_SHARED_LIBRARIES \
+  HOST_OUT_RENDERSCRIPT_BITCODE \
+  HOST_OUT_JAVA_LIBRARIES \
+  HOST_OUT_SDK_ADDON \
+  HOST_OUT_NATIVE_TESTS \
+  HOST_OUT_COVERAGE \
+  HOST_OUT_TESTCASES
 
 HOST_CROSS_OUT_EXECUTABLES := $(HOST_CROSS_OUT)/bin
 HOST_CROSS_OUT_SHARED_LIBRARIES := $(HOST_CROSS_OUT)/lib
 HOST_CROSS_OUT_NATIVE_TESTS := $(HOST_CROSS_OUT)/nativetest
 HOST_CROSS_OUT_COVERAGE := $(HOST_CROSS_OUT)/coverage
 HOST_CROSS_OUT_TESTCASES := $(HOST_CROSS_OUT)/testcases
+.KATI_READONLY := \
+  HOST_CROSS_OUT_EXECUTABLES \
+  HOST_CROSS_OUT_SHARED_LIBRARIES \
+  HOST_CROSS_OUT_NATIVE_TESTS \
+  HOST_CROSS_OUT_COVERAGE \
+  HOST_CROSS_OUT_TESTCASES
 
 HOST_OUT_INTERMEDIATES := $(HOST_OUT)/obj
-HOST_OUT_INTERMEDIATE_LIBRARIES := $(HOST_OUT_INTERMEDIATES)/lib
 HOST_OUT_NOTICE_FILES := $(HOST_OUT_INTERMEDIATES)/NOTICE_FILES
 HOST_OUT_COMMON_INTERMEDIATES := $(HOST_COMMON_OUT_ROOT)/obj
 HOST_OUT_FAKE := $(HOST_OUT)/fake_packages
+.KATI_READONLY := \
+  HOST_OUT_INTERMEDIATES \
+  HOST_OUT_NOTICE_FILES \
+  HOST_OUT_COMMON_INTERMEDIATES \
+  HOST_OUT_FAKE
 
 # Nano environment config
 include $(BUILD_SYSTEM)/aux_config.mk
 
 HOST_CROSS_OUT_INTERMEDIATES := $(HOST_CROSS_OUT)/obj
-HOST_CROSS_OUT_INTERMEDIATE_LIBRARIES := $(HOST_CROSS_OUT_INTERMEDIATES)/lib
 HOST_CROSS_OUT_NOTICE_FILES := $(HOST_CROSS_OUT_INTERMEDIATES)/NOTICE_FILES
+.KATI_READONLY := \
+  HOST_CROSS_OUT_INTERMEDIATES \
+  HOST_CROSS_OUT_NOTICE_FILES
 
 HOST_OUT_GEN := $(HOST_OUT)/gen
 HOST_OUT_COMMON_GEN := $(HOST_COMMON_OUT_ROOT)/gen
+.KATI_READONLY := \
+  HOST_OUT_GEN \
+  HOST_OUT_COMMON_GEN
 
 HOST_CROSS_OUT_GEN := $(HOST_CROSS_OUT)/gen
+.KATI_READONLY := HOST_CROSS_OUT_GEN
 
 HOST_OUT_TEST_CONFIG := $(HOST_OUT)/test_config
+.KATI_READONLY := HOST_OUT_TEST_CONFIG
 
 # Out for HOST_2ND_ARCH
 HOST_2ND_ARCH_VAR_PREFIX := 2ND_
 HOST_2ND_ARCH_MODULE_SUFFIX := _32
 $(HOST_2ND_ARCH_VAR_PREFIX)HOST_OUT_INTERMEDIATES := $(HOST_OUT)/obj32
-$(HOST_2ND_ARCH_VAR_PREFIX)HOST_OUT_INTERMEDIATE_LIBRARIES := $($(HOST_2ND_ARCH_VAR_PREFIX)HOST_OUT_INTERMEDIATES)/lib
 $(HOST_2ND_ARCH_VAR_PREFIX)HOST_OUT_SHARED_LIBRARIES := $(HOST_OUT)/lib
 $(HOST_2ND_ARCH_VAR_PREFIX)HOST_OUT_EXECUTABLES := $(HOST_OUT_EXECUTABLES)
 $(HOST_2ND_ARCH_VAR_PREFIX)HOST_OUT_JAVA_LIBRARIES := $(HOST_OUT_JAVA_LIBRARIES)
 $(HOST_2ND_ARCH_VAR_PREFIX)HOST_OUT_NATIVE_TESTS := $(HOST_OUT)/nativetest
 $(HOST_2ND_ARCH_VAR_PREFIX)HOST_OUT_TESTCASES := $(HOST_OUT_TESTCASES)
+.KATI_READONLY := \
+  HOST_2ND_ARCH_VAR_PREFIX \
+  HOST_2ND_ARCH_MODULE_SUFFIX \
+  $(HOST_2ND_ARCH_VAR_PREFIX)HOST_OUT_INTERMEDIATES \
+  $(HOST_2ND_ARCH_VAR_PREFIX)HOST_OUT_SHARED_LIBRARIES \
+  $(HOST_2ND_ARCH_VAR_PREFIX)HOST_OUT_EXECUTABLES \
+  $(HOST_2ND_ARCH_VAR_PREFIX)HOST_OUT_JAVA_LIBRARIES \
+  $(HOST_2ND_ARCH_VAR_PREFIX)HOST_OUT_NATIVE_TESTS \
+  $(HOST_2ND_ARCH_VAR_PREFIX)HOST_OUT_TESTCASES
 
 # The default host library path.
 # It always points to the path where we build libraries in the default bitness.
 HOST_LIBRARY_PATH := $(HOST_OUT_SHARED_LIBRARIES)
+.KATI_READONLY := HOST_LIBRARY_PATH
 
 # Out for HOST_CROSS_2ND_ARCH
 HOST_CROSS_2ND_ARCH_VAR_PREFIX := 2ND_
 HOST_CROSS_2ND_ARCH_MODULE_SUFFIX := _64
 $(HOST_CROSS_2ND_ARCH_VAR_PREFIX)HOST_CROSS_OUT_INTERMEDIATES := $(HOST_CROSS_OUT)/obj64
-$(HOST_CROSS_2ND_ARCH_VAR_PREFIX)HOST_CROSS_OUT_INTERMEDIATE_LIBRARIES := $($(HOST_CROSS_2ND_ARCH_VAR_PREFIX)HOST_CROSS_OUT_INTERMEDIATES)/lib
 $(HOST_CROSS_2ND_ARCH_VAR_PREFIX)HOST_CROSS_OUT_SHARED_LIBRARIES := $(HOST_CROSS_OUT)/lib64
 $(HOST_CROSS_2ND_ARCH_VAR_PREFIX)HOST_CROSS_OUT_EXECUTABLES := $(HOST_CROSS_OUT_EXECUTABLES)
 $(HOST_CROSS_2ND_ARCH_VAR_PREFIX)HOST_CROSS_OUT_NATIVE_TESTS := $(HOST_CROSS_OUT)/nativetest64
+.KATI_READONLY := \
+  HOST_CROSS_2ND_ARCH_VAR_PREFIX \
+  HOST_CROSS_2ND_ARCH_MODULE_SUFFIX \
+  $(HOST_CROSS_2ND_ARCH_VAR_PREFIX)HOST_CROSS_OUT_INTERMEDIATES \
+  $(HOST_CROSS_2ND_ARCH_VAR_PREFIX)HOST_CROSS_OUT_SHARED_LIBRARIES \
+  $(HOST_CROSS_2ND_ARCH_VAR_PREFIX)HOST_CROSS_OUT_EXECUTABLES \
+  $(HOST_CROSS_2ND_ARCH_VAR_PREFIX)HOST_CROSS_OUT_NATIVE_TESTS
 
 ifneq ($(filter address,$(SANITIZE_TARGET)),)
   TARGET_OUT_INTERMEDIATES := $(PRODUCT_OUT)/obj_asan
@@ -466,18 +584,21 @@
   TARGET_OUT_INTERMEDIATES := $(PRODUCT_OUT)/obj
 endif
 TARGET_OUT_HEADERS := $(TARGET_OUT_INTERMEDIATES)/include
-TARGET_OUT_INTERMEDIATE_LIBRARIES := $(TARGET_OUT_INTERMEDIATES)/lib
+.KATI_READONLY := TARGET_OUT_INTERMEDIATES TARGET_OUT_HEADERS
 
 ifneq ($(filter address,$(SANITIZE_TARGET)),)
   TARGET_OUT_COMMON_INTERMEDIATES := $(TARGET_COMMON_OUT_ROOT)/obj_asan
 else
   TARGET_OUT_COMMON_INTERMEDIATES := $(TARGET_COMMON_OUT_ROOT)/obj
 endif
+.KATI_READONLY := TARGET_OUT_COMMON_INTERMEDIATES
 
 TARGET_OUT_GEN := $(PRODUCT_OUT)/gen
 TARGET_OUT_COMMON_GEN := $(TARGET_COMMON_OUT_ROOT)/gen
+.KATI_READONLY := TARGET_OUT_GEN TARGET_OUT_COMMON_GEN
 
 TARGET_OUT := $(PRODUCT_OUT)/$(TARGET_COPY_OUT_SYSTEM)
+.KATI_READONLY := TARGET_OUT
 ifneq ($(filter address,$(SANITIZE_TARGET)),)
 target_out_shared_libraries_base := $(PRODUCT_OUT)/$(TARGET_COPY_OUT_ASAN)/system
 ifeq ($(SANITIZE_LITE),true)
@@ -512,6 +633,21 @@
 TARGET_OUT_FAKE := $(PRODUCT_OUT)/fake_packages
 TARGET_OUT_TESTCASES := $(PRODUCT_OUT)/testcases
 TARGET_OUT_TEST_CONFIG := $(PRODUCT_OUT)/test_config
+.KATI_READONLY := \
+  TARGET_OUT_EXECUTABLES \
+  TARGET_OUT_OPTIONAL_EXECUTABLES \
+  TARGET_OUT_SHARED_LIBRARIES \
+  TARGET_OUT_RENDERSCRIPT_BITCODE \
+  TARGET_OUT_JAVA_LIBRARIES \
+  TARGET_OUT_APPS \
+  TARGET_OUT_APPS_PRIVILEGED \
+  TARGET_OUT_KEYLAYOUT \
+  TARGET_OUT_KEYCHARS \
+  TARGET_OUT_ETC \
+  TARGET_OUT_NOTICE_FILES \
+  TARGET_OUT_FAKE \
+  TARGET_OUT_TESTCASES \
+  TARGET_OUT_TEST_CONFIG
 
 ifeq ($(SANITIZE_LITE),true)
 # When using SANITIZE_LITE, APKs must not be packaged with sanitized libraries, as they will not
@@ -520,6 +656,7 @@
 else
 TARGET_OUT_SYSTEM_OTHER := $(PRODUCT_OUT)/$(TARGET_COPY_OUT_SYSTEM_OTHER)
 endif
+.KATI_READONLY := TARGET_OUT_SYSTEM_OTHER
 
 # Out for TARGET_2ND_ARCH
 TARGET_2ND_ARCH_VAR_PREFIX := $(HOST_2ND_ARCH_VAR_PREFIX)
@@ -529,13 +666,13 @@
 else
 TARGET_2ND_ARCH_MODULE_SUFFIX := $(HOST_2ND_ARCH_MODULE_SUFFIX)
 endif
+.KATI_READONLY := TARGET_2ND_ARCH_VAR_PREFIX TARGET_2ND_ARCH_MODULE_SUFFIX
 
 ifneq ($(filter address,$(SANITIZE_TARGET)),)
   $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_INTERMEDIATES := $(PRODUCT_OUT)/obj_$(TARGET_2ND_ARCH)_asan
 else
   $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_INTERMEDIATES := $(PRODUCT_OUT)/obj_$(TARGET_2ND_ARCH)
 endif
-$(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_INTERMEDIATE_LIBRARIES := $($(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_INTERMEDIATES)/lib
 ifeq ($(TARGET_TRANSLATE_2ND_ARCH),true)
 $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_SHARED_LIBRARIES := $(target_out_shared_libraries_base)/lib/$(TARGET_2ND_ARCH)
 else
@@ -546,6 +683,14 @@
 $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_APPS := $(TARGET_OUT_APPS)
 $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_APPS_PRIVILEGED := $(TARGET_OUT_APPS_PRIVILEGED)
 $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_TESTCASES := $(TARGET_OUT_TESTCASES)
+.KATI_READONLY := \
+  $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_INTERMEDIATES \
+  $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_SHARED_LIBRARIES \
+  $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_RENDERSCRIPT_BITCODE \
+  $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_EXECUTABLES \
+  $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_APPS \
+  $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_APPS_PRIVILEGED \
+  $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_TESTCASES
 
 TARGET_OUT_DATA := $(PRODUCT_OUT)/$(TARGET_COPY_OUT_DATA)
 TARGET_OUT_DATA_EXECUTABLES := $(TARGET_OUT_EXECUTABLES)
@@ -567,6 +712,20 @@
 TARGET_OUT_VENDOR_METRIC_TESTS := $(TARGET_OUT_DATA)/benchmarktest$(TARGET_VENDOR_TEST_SUFFIX)
 endif
 TARGET_OUT_DATA_FAKE := $(TARGET_OUT_DATA)/fake_packages
+.KATI_READONLY := \
+  TARGET_OUT_DATA \
+  TARGET_OUT_DATA_EXECUTABLES \
+  TARGET_OUT_DATA_SHARED_LIBRARIES \
+  TARGET_OUT_DATA_JAVA_LIBRARIES \
+  TARGET_OUT_DATA_APPS \
+  TARGET_OUT_DATA_KEYLAYOUT \
+  TARGET_OUT_DATA_KEYCHARS \
+  TARGET_OUT_DATA_ETC \
+  TARGET_OUT_DATA_NATIVE_TESTS \
+  TARGET_OUT_DATA_METRIC_TESTS \
+  TARGET_OUT_VENDOR_NATIVE_TESTS \
+  TARGET_OUT_VENDOR_METRIC_TESTS \
+  TARGET_OUT_DATA_FAKE
 
 $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_DATA_EXECUTABLES := $(TARGET_OUT_DATA_EXECUTABLES)
 $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_DATA_SHARED_LIBRARIES := $($(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_SHARED_LIBRARIES)
@@ -582,16 +741,26 @@
 $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_VENDOR_NATIVE_TESTS := $(TARGET_OUT_DATA)/nativetest$(TARGET_VENDOR_TEST_SUFFIX)
 $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_VENDOR_METRIC_TESTS := $(TARGET_OUT_DATA)/benchmarktest$(TARGET_VENDOR_TEST_SUFFIX)
 endif
+.KATI_READONLY := \
+  $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_DATA_EXECUTABLES \
+  $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_DATA_SHARED_LIBRARIES \
+  $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_DATA_APPS \
+  $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_DATA_NATIVE_TESTS \
+  $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_DATA_METRIC_TESTS \
+  $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_VENDOR_NATIVE_TESTS \
+  $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_VENDOR_METRIC_TESTS \
 
 TARGET_OUT_CACHE := $(PRODUCT_OUT)/cache
+.KATI_READONLY := TARGET_OUT_CACHE
 
 TARGET_OUT_VENDOR := $(PRODUCT_OUT)/$(TARGET_COPY_OUT_VENDOR)
+.KATI_READONLY := TARGET_OUT_VENDOR
 ifneq ($(filter address,$(SANITIZE_TARGET)),)
-target_out_vendor_shared_libraries_base := $(PRODUCT_OUT)/$(TARGET_COPY_OUT_ASAN)/vendor
+target_out_vendor_shared_libraries_base := $(PRODUCT_OUT)/$(TARGET_COPY_OUT_ASAN)/$(TARGET_COPY_OUT_VENDOR)
 ifeq ($(SANITIZE_LITE),true)
 # When using SANITIZE_LITE, APKs must not be packaged with sanitized libraries, as they will not
 # work with unsanitized app_process. For simplicity, generate APKs into /data/asan/.
-target_out_vendor_app_base := $(PRODUCT_OUT)/$(TARGET_COPY_OUT_ASAN)/vendor
+target_out_vendor_app_base := $(PRODUCT_OUT)/$(TARGET_COPY_OUT_ASAN)/$(TARGET_COPY_OUT_VENDOR)
 else
 target_out_vendor_app_base := $(TARGET_OUT_VENDOR)
 endif
@@ -612,6 +781,15 @@
 TARGET_OUT_VENDOR_APPS := $(target_out_vendor_app_base)/app
 TARGET_OUT_VENDOR_APPS_PRIVILEGED := $(target_out_vendor_app_base)/priv-app
 TARGET_OUT_VENDOR_ETC := $(TARGET_OUT_VENDOR)/etc
+.KATI_READONLY := \
+  TARGET_OUT_VENDOR_EXECUTABLES \
+  TARGET_OUT_VENDOR_OPTIONAL_EXECUTABLES \
+  TARGET_OUT_VENDOR_SHARED_LIBRARIES \
+  TARGET_OUT_VENDOR_RENDERSCRIPT_BITCODE \
+  TARGET_OUT_VENDOR_JAVA_LIBRARIES \
+  TARGET_OUT_VENDOR_APPS \
+  TARGET_OUT_VENDOR_APPS_PRIVILEGED \
+  TARGET_OUT_VENDOR_ETC
 
 $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_VENDOR_EXECUTABLES := $(TARGET_OUT_VENDOR_EXECUTABLES)
 ifeq ($(TARGET_TRANSLATE_2ND_ARCH),true)
@@ -622,6 +800,12 @@
 $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_VENDOR_RENDERSCRIPT_BITCODE := $($(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_VENDOR_SHARED_LIBRARIES)
 $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_VENDOR_APPS := $(TARGET_OUT_VENDOR_APPS)
 $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_VENDOR_APPS_PRIVILEGED := $(TARGET_OUT_VENDOR_APPS_PRIVILEGED)
+.KATI_READONLY := \
+  $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_VENDOR_EXECUTABLES \
+  $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_VENDOR_SHARED_LIBRARIES \
+  $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_VENDOR_RENDERSCRIPT_BITCODE \
+  $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_VENDOR_APPS \
+  $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_VENDOR_APPS_PRIVILEGED
 
 TARGET_OUT_OEM := $(PRODUCT_OUT)/$(TARGET_COPY_OUT_OEM)
 TARGET_OUT_OEM_EXECUTABLES := $(TARGET_OUT_OEM)/bin
@@ -634,6 +818,12 @@
 # TARGET_OUT_OEM_JAVA_LIBRARIES:= $(TARGET_OUT_OEM)/framework
 TARGET_OUT_OEM_APPS := $(TARGET_OUT_OEM)/app
 TARGET_OUT_OEM_ETC := $(TARGET_OUT_OEM)/etc
+.KATI_READONLY := \
+  TARGET_OUT_OEM \
+  TARGET_OUT_OEM_EXECUTABLES \
+  TARGET_OUT_OEM_SHARED_LIBRARIES \
+  TARGET_OUT_OEM_APPS \
+  TARGET_OUT_OEM_ETC
 
 $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_OEM_EXECUTABLES := $(TARGET_OUT_OEM_EXECUTABLES)
 ifeq ($(TARGET_TRANSLATE_2ND_ARCH),true)
@@ -642,32 +832,74 @@
 $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_OEM_SHARED_LIBRARIES := $(TARGET_OUT_OEM)/lib
 endif
 $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_OEM_APPS := $(TARGET_OUT_OEM_APPS)
+.KATI_READONLY := \
+  $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_OEM_EXECUTABLES \
+  $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_OEM_SHARED_LIBRARIES \
+  $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_OEM_APPS \
 
 TARGET_OUT_ODM := $(PRODUCT_OUT)/$(TARGET_COPY_OUT_ODM)
-TARGET_OUT_ODM_EXECUTABLES := $(TARGET_OUT_ODM)/bin
-ifeq ($(TARGET_IS_64_BIT),true)
-TARGET_OUT_ODM_SHARED_LIBRARIES := $(TARGET_OUT_ODM)/lib64
-else
-TARGET_OUT_ODM_SHARED_LIBRARIES := $(TARGET_OUT_ODM)/lib
-endif
-TARGET_OUT_ODM_APPS := $(TARGET_OUT_ODM)/app
-TARGET_OUT_ODM_ETC := $(TARGET_OUT_ODM)/etc
-
-$(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_ODM_EXECUTABLES := $(TARGET_OUT_ODM_EXECUTABLES)
-ifeq ($(TARGET_TRANSLATE_2ND_ARCH),true)
-$(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_ODM_SHARED_LIBRARIES := $(TARGET_OUT_ODM)/lib/$(TARGET_2ND_ARCH)
-else
-$(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_ODM_SHARED_LIBRARIES := $(TARGET_OUT_ODM)/lib
-endif
-$(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_ODM_APPS := $(TARGET_OUT_ODM_APPS)
-
-TARGET_OUT_PRODUCT := $(PRODUCT_OUT)/$(TARGET_COPY_OUT_PRODUCT)
 ifneq ($(filter address,$(SANITIZE_TARGET)),)
-target_out_product_shared_libraries_base := $(PRODUCT_OUT)/$(TARGET_COPY_OUT_ASAN)/product
+target_out_odm_shared_libraries_base := $(PRODUCT_OUT)/$(TARGET_COPY_OUT_ASAN)/$(TARGET_COPY_OUT_OEM)
 ifeq ($(SANITIZE_LITE),true)
 # When using SANITIZE_LITE, APKs must not be packaged with sanitized libraries, as they will not
 # work with unsanitized app_process. For simplicity, generate APKs into /data/asan/.
-target_out_product_app_base := $(PRODUCT_OUT)/$(TARGET_COPY_OUT_ASAN)/product
+target_out_odm_app_base := $(PRODUCT_OUT)/$(TARGET_COPY_OUT_ASAN)/$(TARGET_COPY_OUT_OEM)
+else
+target_out_odm_app_base := $(TARGET_OUT_ODM)
+endif
+else
+target_out_odm_shared_libraries_base := $(TARGET_OUT_ODM)
+target_out_odm_app_base := $(TARGET_OUT_ODM)
+endif
+
+TARGET_OUT_ODM_EXECUTABLES := $(TARGET_OUT_ODM)/bin
+TARGET_OUT_ODM_OPTIONAL_EXECUTABLES := $(TARGET_OUT_ODM)/xbin
+ifeq ($(TARGET_IS_64_BIT),true)
+TARGET_OUT_ODM_SHARED_LIBRARIES := $(target_out_odm_shared_libraries_base)/lib64
+else
+TARGET_OUT_ODM_SHARED_LIBRARIES := $(target_out_odm_shared_libraries_base)/lib
+endif
+TARGET_OUT_ODM_RENDERSCRIPT_BITCODE := $(TARGET_OUT_ODM_SHARED_LIBRARIES)
+TARGET_OUT_ODM_JAVA_LIBRARIES := $(TARGET_OUT_ODM)/framework
+TARGET_OUT_ODM_APPS := $(target_out_odm_app_base)/app
+TARGET_OUT_ODM_APPS_PRIVILEGED := $(target_out_odm_app_base)/priv-app
+TARGET_OUT_ODM_ETC := $(TARGET_OUT_ODM)/etc
+.KATI_READONLY := \
+  TARGET_OUT_ODM \
+  TARGET_OUT_ODM_EXECUTABLES \
+  TARGET_OUT_ODM_OPTIONAL_EXECUTABLES \
+  TARGET_OUT_ODM_SHARED_LIBRARIES \
+  TARGET_OUT_ODM_RENDERSCRIPT_BITCODE \
+  TARGET_OUT_ODM_JAVA_LIBRARIES \
+  TARGET_OUT_ODM_APPS \
+  TARGET_OUT_ODM_APPS_PRIVILEGED \
+  TARGET_OUT_ODM_ETC
+
+$(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_ODM_EXECUTABLES := $(TARGET_OUT_ODM_EXECUTABLES)
+ifeq ($(TARGET_TRANSLATE_2ND_ARCH),true)
+$(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_ODM_SHARED_LIBRARIES := $(target_out_odm_shared_libraries_base)/lib/$(TARGET_2ND_ARCH)
+else
+$(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_ODM_SHARED_LIBRARIES := $(target_out_odm_shared_libraries_base)/lib
+endif
+$(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_ODM_RENDERSCRIPT_BITCODE := $($(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_ODM_SHARED_LIBRARIES)
+$(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_ODM_APPS := $(TARGET_OUT_ODM_APPS)
+$(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_ODM_APPS_PRIVILEGED := $(TARGET_OUT_ODM_APPS_PRIVILEGED)
+.KATI_READONLY := \
+  $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_ODM_EXECUTABLES \
+  $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_ODM_SHARED_LIBRARIES \
+  $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_ODM_RENDERSCRIPT_BITCODE \
+  $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_ODM_APPS \
+  $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_ODM_APPS_PRIVILEGED
+
+TARGET_OUT_PRODUCT := $(PRODUCT_OUT)/$(TARGET_COPY_OUT_PRODUCT)
+TARGET_OUT_PRODUCT_EXECUTABLES := $(TARGET_OUT_PRODUCT)/bin
+.KATI_READONLY := TARGET_OUT_PRODUCT
+ifneq ($(filter address,$(SANITIZE_TARGET)),)
+target_out_product_shared_libraries_base := $(PRODUCT_OUT)/$(TARGET_COPY_OUT_ASAN)/$(TARGET_COPY_OUT_PRODUCT)
+ifeq ($(SANITIZE_LITE),true)
+# When using SANITIZE_LITE, APKs must not be packaged with sanitized libraries, as they will not
+# work with unsanitized app_process. For simplicity, generate APKs into /data/asan/.
+target_out_product_app_base := $(PRODUCT_OUT)/$(TARGET_COPY_OUT_ASAN)/$(TARGET_COPY_OUT_PRODUCT)
 else
 target_out_product_app_base := $(TARGET_OUT_PRODUCT)
 endif
@@ -681,11 +913,19 @@
 else
 TARGET_OUT_PRODUCT_SHARED_LIBRARIES := $(target_out_product_shared_libraries_base)/lib
 endif
-TARGET_OUT_PRODUCT_JAVA_LIBRARIES:= $(TARGET_OUT_PRODUCT)/framework
+TARGET_OUT_PRODUCT_JAVA_LIBRARIES := $(TARGET_OUT_PRODUCT)/framework
 TARGET_OUT_PRODUCT_APPS := $(target_out_product_app_base)/app
 TARGET_OUT_PRODUCT_APPS_PRIVILEGED := $(target_out_product_app_base)/priv-app
 TARGET_OUT_PRODUCT_ETC := $(TARGET_OUT_PRODUCT)/etc
+.KATI_READONLY := \
+  TARGET_OUT_PRODUCT_EXECUTABLES \
+  TARGET_OUT_PRODUCT_SHARED_LIBRARIES \
+  TARGET_OUT_PRODUCT_JAVA_LIBRARIES \
+  TARGET_OUT_PRODUCT_APPS \
+  TARGET_OUT_PRODUCT_APPS_PRIVILEGED \
+  TARGET_OUT_PRODUCT_ETC
 
+$(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_PRODUCT_EXECUTABLES := $(TARGET_OUT_PRODUCT_EXECUTABLES)
 ifeq ($(TARGET_TRANSLATE_2ND_ARCH),true)
 $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_PRODUCT_SHARED_LIBRARIES := $(target_out_product_shared_libraries_base)/lib/$(TARGET_2ND_ARCH)
 else
@@ -693,8 +933,47 @@
 endif
 $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_PRODUCT_APPS := $(TARGET_OUT_PRODUCT_APPS)
 $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_PRODUCT_APPS_PRIVILEGED := $(TARGET_OUT_PRODUCT_APPS_PRIVILEGED)
+.KATI_READONLY := \
+  $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_PRODUCT_EXECUTABLES \
+  $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_PRODUCT_SHARED_LIBRARIES \
+  $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_PRODUCT_APPS \
+  $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_PRODUCT_APPS_PRIVILEGED
+
+TARGET_OUT_PRODUCT_SERVICES := $(PRODUCT_OUT)/$(TARGET_COPY_OUT_PRODUCT_SERVICES)
+ifneq ($(filter address,$(SANITIZE_TARGET)),)
+target_out_product_services_shared_libraries_base := $(PRODUCT_OUT)/$(TARGET_COPY_OUT_ASAN)/$(TARGET_COPY_OUT_PRODUCT_SERVICES)
+ifeq ($(SANITIZE_LITE),true)
+# When using SANITIZE_LITE, APKs must not be packaged with sanitized libraries, as they will not
+# work with unsanitized app_process. For simplicity, generate APKs into /data/asan/.
+target_out_product_services_app_base := $(PRODUCT_OUT)/$(TARGET_COPY_OUT_ASAN)/$(TARGET_COPY_OUT_PRODUCT_SERVICES)
+else
+target_out_product_services_app_base := $(TARGET_OUT_PRODUCT_SERVICES)
+endif
+else
+target_out_product_services_shared_libraries_base := $(TARGET_OUT_PRODUCT_SERVICES)
+target_out_product_services_app_base := $(TARGET_OUT_PRODUCT_SERVICES)
+endif
+
+ifeq ($(TARGET_IS_64_BIT),true)
+TARGET_OUT_PRODUCT_SERVICES_SHARED_LIBRARIES := $(target_out_product_services_shared_libraries_base)/lib64
+else
+TARGET_OUT_PRODUCT_SERVICES_SHARED_LIBRARIES := $(target_out_product_services_shared_libraries_base)/lib
+endif
+TARGET_OUT_PRODUCT_SERVICES_JAVA_LIBRARIES:= $(TARGET_OUT_PRODUCT_SERVICES)/framework
+TARGET_OUT_PRODUCT_SERVICES_APPS := $(target_out_product_services_app_base)/app
+TARGET_OUT_PRODUCT_SERVICES_APPS_PRIVILEGED := $(target_out_product_services_app_base)/priv-app
+TARGET_OUT_PRODUCT_SERVICES_ETC := $(TARGET_OUT_PRODUCT_SERVICES)/etc
+
+ifeq ($(TARGET_TRANSLATE_2ND_ARCH),true)
+$(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_PRODUCT_SERVICES_SHARED_LIBRARIES := $(target_out_product_services_shared_libraries_base)/lib/$(TARGET_2ND_ARCH)
+else
+$(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_PRODUCT_SERVICES_SHARED_LIBRARIES := $(target_out_product_services_shared_libraries_base)/lib
+endif
+$(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_PRODUCT_SERVICES_APPS := $(TARGET_OUT_PRODUCT_SERVICES_APPS)
+$(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_PRODUCT_SERVICES_APPS_PRIVILEGED := $(TARGET_OUT_PRODUCT_SERVICES_APPS_PRIVILEGED)
 
 TARGET_OUT_BREAKPAD := $(PRODUCT_OUT)/breakpad
+.KATI_READONLY := TARGET_OUT_BREAKPAD
 
 TARGET_OUT_UNSTRIPPED := $(PRODUCT_OUT)/symbols
 TARGET_OUT_EXECUTABLES_UNSTRIPPED := $(TARGET_OUT_UNSTRIPPED)/system/bin
@@ -704,31 +983,58 @@
 TARGET_ROOT_OUT_SBIN_UNSTRIPPED := $(TARGET_OUT_UNSTRIPPED)/sbin
 TARGET_ROOT_OUT_BIN_UNSTRIPPED := $(TARGET_OUT_UNSTRIPPED)/bin
 TARGET_OUT_COVERAGE := $(PRODUCT_OUT)/coverage
+.KATI_READONLY := \
+  TARGET_OUT_UNSTRIPPED \
+  TARGET_OUT_EXECUTABLES_UNSTRIPPED \
+  TARGET_OUT_SHARED_LIBRARIES_UNSTRIPPED \
+  TARGET_OUT_VENDOR_SHARED_LIBRARIES_UNSTRIPPED \
+  TARGET_ROOT_OUT_UNSTRIPPED \
+  TARGET_ROOT_OUT_SBIN_UNSTRIPPED \
+  TARGET_ROOT_OUT_BIN_UNSTRIPPED \
+  TARGET_OUT_COVERAGE
+
+TARGET_RAMDISK_OUT := $(PRODUCT_OUT)/$(TARGET_COPY_OUT_RAMDISK)
+TARGET_RAMDISK_OUT_UNSTRIPPED := $(TARGET_OUT_UNSTRIPPED)
 
 TARGET_ROOT_OUT := $(PRODUCT_OUT)/$(TARGET_COPY_OUT_ROOT)
 TARGET_ROOT_OUT_BIN := $(TARGET_ROOT_OUT)/bin
 TARGET_ROOT_OUT_SBIN := $(TARGET_ROOT_OUT)/sbin
 TARGET_ROOT_OUT_ETC := $(TARGET_ROOT_OUT)/etc
 TARGET_ROOT_OUT_USR := $(TARGET_ROOT_OUT)/usr
+.KATI_READONLY := \
+  TARGET_ROOT_OUT \
+  TARGET_ROOT_OUT_BIN \
+  TARGET_ROOT_OUT_SBIN \
+  TARGET_ROOT_OUT_ETC \
+  TARGET_ROOT_OUT_USR
 
 TARGET_RECOVERY_OUT := $(PRODUCT_OUT)/$(TARGET_COPY_OUT_RECOVERY)
 TARGET_RECOVERY_ROOT_OUT := $(TARGET_RECOVERY_OUT)/root
+.KATI_READONLY := \
+  TARGET_RECOVERY_OUT \
+  TARGET_RECOVERY_ROOT_OUT
 
 TARGET_SYSLOADER_OUT := $(PRODUCT_OUT)/sysloader
 TARGET_SYSLOADER_ROOT_OUT := $(TARGET_SYSLOADER_OUT)/root
 TARGET_SYSLOADER_SYSTEM_OUT := $(TARGET_SYSLOADER_OUT)/root/system
+.KATI_READONLY := \
+  TARGET_SYSLOADER_OUT \
+  TARGET_SYSLOADER_ROOT_OUT \
+  TARGET_SYSLOADER_SYSTEM_OUT
 
 TARGET_INSTALLER_OUT := $(PRODUCT_OUT)/installer
 TARGET_INSTALLER_DATA_OUT := $(TARGET_INSTALLER_OUT)/data
 TARGET_INSTALLER_ROOT_OUT := $(TARGET_INSTALLER_OUT)/root
 TARGET_INSTALLER_SYSTEM_OUT := $(TARGET_INSTALLER_OUT)/root/system
+.KATI_READONLY := \
+  TARGET_INSTALLER_OUT \
+  TARGET_INSTALLER_DATA_OUT \
+  TARGET_INSTALLER_ROOT_OUT \
+  TARGET_INSTALLER_SYSTEM_OUT
 
 COMMON_MODULE_CLASSES := TARGET-NOTICE_FILES HOST-NOTICE_FILES HOST-JAVA_LIBRARIES
 PER_ARCH_MODULE_CLASSES := SHARED_LIBRARIES STATIC_LIBRARIES EXECUTABLES GYP RENDERSCRIPT_BITCODE NATIVE_TESTS HEADER_LIBRARIES
-
-ifeq (,$(strip $(DIST_DIR)))
-  DIST_DIR := $(OUT_DIR)/dist
-endif
+.KATI_READONLY := COMMON_MODULE_CLASSES PER_ARCH_MODULE_CLASSES
 
 ifeq ($(CALLED_FROM_SETUP),true)
 PRINT_BUILD_CONFIG ?= true
diff --git a/core/executable.mk b/core/executable.mk
index f1b2462..e71ff33 100644
--- a/core/executable.mk
+++ b/core/executable.mk
@@ -12,6 +12,8 @@
     my_skip_this_target := true
   else ifeq (false, $(LOCAL_CLANG))
     my_skip_this_target := true
+  else ifeq (never, $(LOCAL_SANITIZE))
+    my_skip_this_target := true
   endif
 endif
 
@@ -79,7 +81,6 @@
 include $(BUILD_SYSTEM)/module_arch_supported.mk
 ifeq ($(my_module_arch_supported),true)
 # non-preferred arch is supported
-OVERRIDE_BUILT_MODULE_PATH :=
 LOCAL_BUILT_MODULE :=
 LOCAL_INSTALLED_MODULE :=
 LOCAL_INTERMEDIATE_TARGETS :=
diff --git a/core/executable_internal.mk b/core/executable_internal.mk
index 4a62fbf..c28c144 100644
--- a/core/executable_internal.mk
+++ b/core/executable_internal.mk
@@ -36,6 +36,11 @@
 endif
 
 # Define PRIVATE_ variables from global vars
+ifeq ($(LOCAL_NO_LIBCRT_BUILTINS),true)
+my_target_libcrt_builtins :=
+else
+my_target_libcrt_builtins := $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)LIBCRT_BUILTINS)
+endif
 ifeq ($(LOCAL_NO_LIBGCC),true)
 my_target_libgcc :=
 else
@@ -47,33 +52,33 @@
 my_target_crtbegin_static_o :=
 my_target_crtend_o :=
 else ifdef LOCAL_USE_VNDK
-my_target_crtbegin_dynamic_o := $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_OUT_INTERMEDIATE_LIBRARIES)/crtbegin_dynamic.vendor.o
-my_target_crtbegin_static_o := $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_OUT_INTERMEDIATE_LIBRARIES)/crtbegin_static.vendor.o
-my_target_crtend_o := $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_OUT_INTERMEDIATE_LIBRARIES)/crtend_android.vendor.o
+my_target_crtbegin_dynamic_o := $(SOONG_$(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_OBJECT_crtbegin_dynamic.vendor)
+my_target_crtbegin_static_o := $(SOONG_$(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_OBJECT_crtbegin_static.vendor)
+my_target_crtend_o := $(SOONG_$(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_OBJECT_crtend_android.vendor)
 else
-my_target_crtbegin_dynamic_o := $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_OUT_INTERMEDIATE_LIBRARIES)/crtbegin_dynamic.o
-my_target_crtbegin_static_o := $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_OUT_INTERMEDIATE_LIBRARIES)/crtbegin_static.o
-my_target_crtend_o := $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_OUT_INTERMEDIATE_LIBRARIES)/crtend_android.o
+my_target_crtbegin_dynamic_o := $(SOONG_$(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_OBJECT_crtbegin_dynamic)
+my_target_crtbegin_static_o := $(SOONG_$(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_OBJECT_crtbegin_static)
+my_target_crtend_o := $(SOONG_$(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_OBJECT_crtend_android)
 endif
 ifneq ($(LOCAL_SDK_VERSION),)
 my_target_crtbegin_dynamic_o := $(wildcard $(my_ndk_sysroot_lib)/crtbegin_dynamic.o)
 my_target_crtbegin_static_o := $(wildcard $(my_ndk_sysroot_lib)/crtbegin_static.o)
 my_target_crtend_o := $(wildcard $(my_ndk_sysroot_lib)/crtend_android.o)
 endif
+$(linked_module): PRIVATE_TARGET_LIBCRT_BUILTINS := $(my_target_libcrt_builtins)
 $(linked_module): PRIVATE_TARGET_LIBGCC := $(my_target_libgcc)
 $(linked_module): PRIVATE_TARGET_LIBATOMIC := $(my_target_libatomic)
 $(linked_module): PRIVATE_TARGET_CRTBEGIN_DYNAMIC_O := $(my_target_crtbegin_dynamic_o)
 $(linked_module): PRIVATE_TARGET_CRTBEGIN_STATIC_O := $(my_target_crtbegin_static_o)
 $(linked_module): PRIVATE_TARGET_CRTEND_O := $(my_target_crtend_o)
-$(linked_module): PRIVATE_TARGET_OUT_INTERMEDIATE_LIBRARIES := $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_OUT_INTERMEDIATE_LIBRARIES)
 $(linked_module): PRIVATE_POST_LINK_CMD := $(LOCAL_POST_LINK_CMD)
 
 ifeq ($(LOCAL_FORCE_STATIC_EXECUTABLE),true)
-$(linked_module): $(my_target_crtbegin_static_o) $(all_objects) $(all_libraries) $(my_target_crtend_o) $(my_target_libgcc) $(my_target_libatomic)
+$(linked_module): $(my_target_crtbegin_static_o) $(all_objects) $(all_libraries) $(my_target_crtend_o) $(my_target_libcrt_builtins) $(my_target_libgcc) $(my_target_libatomic)
 	$(transform-o-to-static-executable)
 	$(PRIVATE_POST_LINK_CMD)
 else
-$(linked_module): $(my_target_crtbegin_dynamic_o) $(all_objects) $(all_libraries) $(my_target_crtend_o) $(my_target_libgcc) $(my_target_libatomic)
+$(linked_module): $(my_target_crtbegin_dynamic_o) $(all_objects) $(all_libraries) $(my_target_crtend_o) $(my_target_libcrt_builtins) $(my_target_libgcc) $(my_target_libatomic)
 	$(transform-o-to-executable)
 	$(PRIVATE_POST_LINK_CMD)
 endif
diff --git a/core/force_aapt2.mk b/core/force_aapt2.mk
new file mode 100644
index 0000000..ede6fd4
--- /dev/null
+++ b/core/force_aapt2.mk
@@ -0,0 +1,71 @@
+#
+# Copyright (C) 2018 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# Including this makefile will force AAPT2 on if FORCE_AAPT2==true,
+# rewriting some properties to convert standard AAPT usage to AAPT2.
+
+ifneq ($(FORCE_AAPT2),false)
+  ifeq ($(LOCAL_USE_AAPT2),)
+    # Force AAPT2 on
+    LOCAL_USE_AAPT2 := true
+    # Filter out support library resources
+    LOCAL_RESOURCE_DIR := $(filter-out \
+      prebuilts/sdk/current/% \
+      frameworks/support/%,\
+        $(LOCAL_RESOURCE_DIR))
+    # Filter out unnecessary aapt flags
+    ifneq (,$(filter --extra-packages,$(LOCAL_AAPT_FLAGS)))
+      LOCAL_AAPT_FLAGS := $(subst --extra-packages=,--extra-packages$(space), \
+        $(filter-out \
+          --extra-packages=android.support.% \
+          --extra-packages=androidx.%, \
+            $(subst --extra-packages$(space),--extra-packages=,$(LOCAL_AAPT_FLAGS))))
+        ifeq (,$(filter --extra-packages,$(LOCAL_AAPT_FLAGS)))
+          LOCAL_AAPT_FLAGS := $(filter-out --auto-add-overlay,$(LOCAL_AAPT_FLAGS))
+        endif
+    endif
+
+    # AAPT2 is pickier about missing resources.  Support library may have references to resources
+    # added in current, so always treat LOCAL_SDK_VERSION as LOCAL_SDK_RES_VERSION := current.
+    ifdef LOCAL_SDK_VERSION
+      LOCAL_SDK_RES_VERSION := current
+    endif
+
+    ifeq (,$(strip $(LOCAL_MANIFEST_FILE)$(LOCAL_FULL_MANIFEST_FILE)))
+      ifeq (,$(wildcard $(LOCAL_PATH)/AndroidManifest.xml))
+        # work around missing manifests by creating a default one
+        LOCAL_FULL_MANIFEST_FILE := $(call local-intermediates-dir,COMMON)/DefaultManifest.xml
+        ifdef LOCAL_MIN_SDK_VERSION
+          my_manifest_min_sdk_version := $(LOCAL_MIN_SDK_VERSION)
+        else ifneq (,$(filter-out current system_current test_current core_current, $(LOCAL_SDK_VERSION)))
+          my_manifest_min_sdk_version := $(call get-numeric-sdk-version,$(LOCAL_SDK_VERSION))
+        else
+          my_manifest_min_sdk_version := $(DEFAULT_APP_TARGET_SDK)
+        endif
+        $(call create-default-manifest-file,$(LOCAL_FULL_MANIFEST_FILE),$(my_manifest_min_sdk_version))
+        my_manifest_min_sdk_version :=
+      endif
+    endif
+  endif
+endif
+
+ifneq ($(LOCAL_USE_AAPT2),true)
+  ifneq ($(LOCAL_USE_AAPT2),false)
+    ifneq ($(LOCAL_USE_AAPT2),)
+      $(call pretty-error,Invalid value for LOCAL_USE_AAPT2: "$(LOCAL_USE_AAPT2)")
+    endif
+  endif
+endif
diff --git a/core/generate_enforce_rro.mk b/core/generate_enforce_rro.mk
index 62a8c8d..c88c779 100644
--- a/core/generate_enforce_rro.mk
+++ b/core/generate_enforce_rro.mk
@@ -27,4 +27,10 @@
 LOCAL_AAPT_FLAGS += --auto-add-overlay
 LOCAL_RESOURCE_DIR := $(enforce_rro_source_overlays)
 
+ifeq (framework-res__auto_generated_rro,$(enforce_rro_module))
+LOCAL_PRIVATE_PLATFORM_APIS := true
+else
+LOCAL_SDK_VERSION := current
+endif
+
 include $(BUILD_RRO_PACKAGE)
diff --git a/core/goma.mk b/core/goma.mk
index 2fb37a7..3787dfd 100644
--- a/core/goma.mk
+++ b/core/goma.mk
@@ -14,9 +14,6 @@
 # limitations under the License.
 #
 
-# Used by the compiler wrapper, but should only be set by gomacc
-unexport GOMACC_PATH
-
 # Notice: this works only with Google's Goma build infrastructure.
 ifneq ($(filter-out false,$(USE_GOMA)),)
   # Goma requires a lot of processes and file descriptors.
diff --git a/core/header_library.mk b/core/header_library.mk
index 5144679..3f2730e 100644
--- a/core/header_library.mk
+++ b/core/header_library.mk
@@ -25,7 +25,6 @@
 
   ifeq ($(my_module_arch_supported),true)
     # Build for 2ND_ARCH
-    OVERRIDE_BUILT_MODULE_PATH :=
     LOCAL_BUILT_MODULE :=
     LOCAL_INSTALLED_MODULE :=
     LOCAL_INTERMEDIATE_TARGETS :=
@@ -43,7 +42,6 @@
 
     ifeq ($(my_module_arch_supported),true)
       # Build for 2ND_ARCH
-      OVERRIDE_BUILT_MODULE_PATH :=
       LOCAL_BUILT_MODULE :=
       LOCAL_INSTALLED_MODULE :=
       LOCAL_INTERMEDIATE_TARGETS :=
@@ -56,7 +54,6 @@
 
       ifeq ($(my_module_arch_supported),true)
         # Build for HOST_CROSS_2ND_ARCH
-        OVERRIDE_BUILT_MODULE_PATH :=
         LOCAL_BUILT_MODULE :=
         LOCAL_INSTALLED_MODULE :=
         LOCAL_INTERMEDIATE_TARGETS :=
diff --git a/core/host_dalvik_java_library.mk b/core/host_dalvik_java_library.mk
index 1ef0ccb..6a32ff9 100644
--- a/core/host_dalvik_java_library.mk
+++ b/core/host_dalvik_java_library.mk
@@ -33,7 +33,6 @@
 full_classes_header_jar := $(intermediates.COMMON)/classes-header.jar
 full_classes_compiled_jar := $(intermediates.COMMON)/classes-full-debug.jar
 full_classes_combined_jar := $(intermediates.COMMON)/classes-combined.jar
-full_classes_desugar_jar := $(intermediates.COMMON)/desugar.classes.jar
 full_classes_jarjar_jar := $(intermediates.COMMON)/classes-jarjar.jar
 full_classes_jar := $(intermediates.COMMON)/classes.jar
 built_dex := $(intermediates.COMMON)/classes.dex
@@ -43,7 +42,6 @@
     $(full_classes_turbine_jar) \
     $(full_classes_compiled_jar) \
     $(full_classes_combined_jar) \
-    $(full_classes_desugar_jar) \
     $(full_classes_jarjar_jar) \
     $(full_classes_jar) \
     $(built_dex) \
@@ -158,22 +156,6 @@
 
 $(eval $(call copy-one-file,$(full_classes_jarjar_jar),$(full_classes_jar)))
 
-ifneq ($(USE_D8_DESUGAR),true)
-my_desugaring :=
-ifeq ($(LOCAL_JAVA_LANGUAGE_VERSION),1.8)
-my_desugaring := true
-$(full_classes_desugar_jar): PRIVATE_DX_FLAGS := $(LOCAL_DX_FLAGS)
-$(full_classes_desugar_jar): $(full_classes_jar) $(full_java_header_libs) $(DESUGAR)
-	$(desugar-classes-jar)
-endif
-else
-my_desugaring :=
-endif
-
-ifndef my_desugaring
-full_classes_desugar_jar := $(full_classes_jar)
-endif
-
 ifeq ($(LOCAL_IS_STATIC_JAVA_LIBRARY),true)
 # No dex; all we want are the .class files with resources.
 $(LOCAL_BUILT_MODULE) : $(java_resource_sources)
@@ -184,20 +166,20 @@
 else # !LOCAL_IS_STATIC_JAVA_LIBRARY
 $(built_dex): PRIVATE_INTERMEDIATES_DIR := $(intermediates.COMMON)
 $(built_dex): PRIVATE_DX_FLAGS := $(LOCAL_DX_FLAGS)
-$(built_dex): $(full_classes_desugar_jar) $(DX) $(ZIP2ZIP)
-ifneq ($(USE_D8_DESUGAR),true)
+$(built_dex): $(full_classes_jar) $(DX) $(ZIP2ZIP)
 	$(transform-classes.jar-to-dex)
-else
-	$(transform-classes-d8.jar-to-dex)
-endif
 
 $(LOCAL_BUILT_MODULE): PRIVATE_DEX_FILE := $(built_dex)
 $(LOCAL_BUILT_MODULE): PRIVATE_SOURCE_ARCHIVE := $(full_classes_jarjar_jar)
-$(LOCAL_BUILT_MODULE): PRIVATE_DONT_DELETE_JAR_DIRS := $(LOCAL_DONT_DELETE_JAR_DIRS)
+$(LOCAL_BUILT_MODULE): $(MERGE_ZIPS) $(SOONG_ZIP) $(ZIP2ZIP)
 $(LOCAL_BUILT_MODULE): $(built_dex) $(java_resource_sources)
 	@echo "Host Jar: $(PRIVATE_MODULE) ($@)"
-	$(call initialize-package-file,$(PRIVATE_SOURCE_ARCHIVE),$@)
-	$(add-dex-to-package)
+	rm -rf $@.parts
+	mkdir -p $@.parts
+	$(call create-dex-jar,$@.parts/dex.zip,$(PRIVATE_DEX_FILE))
+	$(call extract-resources-jar,$@.parts/res.zip,$(PRIVATE_SOURCE_ARCHIVE))
+	$(MERGE_ZIPS) -j $@ $@.parts/dex.zip $@.parts/res.zip
+	rm -rf $@.parts
 
 endif # !LOCAL_IS_STATIC_JAVA_LIBRARY
 
diff --git a/core/host_executable.mk b/core/host_executable.mk
index 1480c2c..a2111a1 100644
--- a/core/host_executable.mk
+++ b/core/host_executable.mk
@@ -11,10 +11,6 @@
 endif
 endif
 
-ifeq ($(LOCAL_NO_FPIE),)
-LOCAL_LDFLAGS += $(HOST_FPIE_FLAGS)
-endif
-
 ifeq ($(my_module_multilib),both)
 ifneq ($(LOCAL_MODULE_CLASS),NATIVE_TESTS)
 ifeq ($(LOCAL_MODULE_PATH_32)$(LOCAL_MODULE_STEM_32),)
@@ -40,7 +36,6 @@
 include $(BUILD_SYSTEM)/module_arch_supported.mk
 ifeq ($(my_module_arch_supported),true)
 # Build for HOST_2ND_ARCH
-OVERRIDE_BUILT_MODULE_PATH :=
 LOCAL_BUILT_MODULE :=
 LOCAL_INSTALLED_MODULE :=
 LOCAL_INTERMEDIATE_TARGETS :=
@@ -56,7 +51,6 @@
 include $(BUILD_SYSTEM)/module_arch_supported.mk
 ifeq ($(my_module_arch_supported),true)
 # Build for Windows
-OVERRIDE_BUILT_MODULE_PATH :=
 # we don't want others using the cross compiled version
 saved_LOCAL_BUILT_MODULE := $(LOCAL_BUILT_MODULE)
 saved_LOCAL_INSTALLED_MODULE := $(LOCAL_INSTALLED_MODULE)
@@ -65,10 +59,6 @@
 LOCAL_INSTALLED_MODULE :=
 LOCAL_INTERMEDIATE_TARGETS :=
 
-ifeq ($(LOCAL_NO_FPIE),)
-LOCAL_LDFLAGS += $(HOST_CROSS_FPIE_FLAGS)
-endif
-
 include $(BUILD_SYSTEM)/host_executable_internal.mk
 LOCAL_LDFLAGS := $(saved_LOCAL_LDFLAGS)
 LOCAL_BUILT_MODULE := $(saved_LOCAL_BUILT_MODULE)
@@ -79,7 +69,6 @@
 LOCAL_2ND_ARCH_VAR_PREFIX := $(HOST_CROSS_2ND_ARCH_VAR_PREFIX)
 include $(BUILD_SYSTEM)/module_arch_supported.mk
 ifeq ($(my_module_arch_supported),true)
-OVERRIDE_BUILT_MODULE_PATH :=
 # we don't want others using the cross compiled version
 saved_LOCAL_BUILT_MODULE := $(LOCAL_BUILT_MODULE)
 saved_LOCAL_INSTALLED_MODULE := $(LOCAL_INSTALLED_MODULE)
@@ -88,10 +77,6 @@
 LOCAL_INSTALLED_MODULE :=
 LOCAL_INTERMEDIATE_TARGETS :=
 
-ifeq ($(LOCAL_NO_FPIE),)
-LOCAL_LDFLAGS += $(HOST_CROSS_FPIE_FLAGS)
-endif
-
 include $(BUILD_SYSTEM)/host_executable_internal.mk
 LOCAL_LDFLAGS := $(saved_LOCAL_LDFLAGS)
 LOCAL_BUILT_MODULE := $(saved_LOCAL_BUILT_MODULE)
diff --git a/core/host_executable_internal.mk b/core/host_executable_internal.mk
index c4f9f66..e72c419 100644
--- a/core/host_executable_internal.mk
+++ b/core/host_executable_internal.mk
@@ -33,7 +33,7 @@
 
 my_libdir := $(notdir $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)OUT_SHARED_LIBRARIES))
 ifeq ($(LOCAL_MODULE_CLASS),NATIVE_TESTS)
-$(LOCAL_BUILT_MODULE): PRIVATE_RPATHS := ../../$(my_libdir)
+$(LOCAL_BUILT_MODULE): PRIVATE_RPATHS := ../../$(my_libdir) ../../../$(my_libdir)
 else
 $(LOCAL_BUILT_MODULE): PRIVATE_RPATHS := ../$(my_libdir) $(my_libdir)
 endif
diff --git a/core/host_java_library.mk b/core/host_java_library.mk
index 750254f..c8d2ee7 100644
--- a/core/host_java_library.mk
+++ b/core/host_java_library.mk
@@ -93,6 +93,7 @@
 
 javac-check : $(full_classes_compiled_jar)
 javac-check-$(LOCAL_MODULE) : $(full_classes_compiled_jar)
+.PHONY: javac-check-$(LOCAL_MODULE)
 
 $(full_classes_combined_jar): $(full_classes_compiled_jar) \
                               $(jar_manifest_file) \
diff --git a/core/host_java_library_common.mk b/core/host_java_library_common.mk
index 51e2d94..0e62f60 100644
--- a/core/host_java_library_common.mk
+++ b/core/host_java_library_common.mk
@@ -32,15 +32,15 @@
 proto_sources := $(filter %.proto,$(LOCAL_SRC_FILES))
 ifneq ($(proto_sources),)
 ifeq ($(LOCAL_PROTOC_OPTIMIZE_TYPE),micro)
-    LOCAL_JAVA_LIBRARIES += host-libprotobuf-java-micro
+    LOCAL_JAVA_LIBRARIES += libprotobuf-java-micro
 else
   ifeq ($(LOCAL_PROTOC_OPTIMIZE_TYPE),nano)
-    LOCAL_JAVA_LIBRARIES += host-libprotobuf-java-nano
+    LOCAL_JAVA_LIBRARIES += libprotobuf-java-nano
   else
     ifeq ($(LOCAL_PROTOC_OPTIMIZE_TYPE),full)
-      LOCAL_JAVA_LIBRARIES += host-libprotobuf-java-full
+      LOCAL_JAVA_LIBRARIES += libprotobuf-java-full
     else
-      LOCAL_JAVA_LIBRARIES += host-libprotobuf-java-lite
+      LOCAL_JAVA_LIBRARIES += libprotobuf-java-lite
     endif
   endif
 endif
@@ -48,8 +48,3 @@
 
 LOCAL_INTERMEDIATE_SOURCE_DIR := $(intermediates.COMMON)/src
 LOCAL_JAVA_LIBRARIES := $(sort $(LOCAL_JAVA_LIBRARIES))
-
-# If error prone is enabled then add LOCAL_ERROR_PRONE_FLAGS to LOCAL_JAVACFLAGS
-ifeq ($(RUN_ERROR_PRONE),true)
-LOCAL_JAVACFLAGS += $(LOCAL_ERROR_PRONE_FLAGS)
-endif
diff --git a/core/host_shared_library.mk b/core/host_shared_library.mk
index 5da7913..e9b3dad 100644
--- a/core/host_shared_library.mk
+++ b/core/host_shared_library.mk
@@ -23,7 +23,6 @@
 include $(BUILD_SYSTEM)/module_arch_supported.mk
 ifeq ($(my_module_arch_supported),true)
 # Build for HOST_2ND_ARCH
-OVERRIDE_BUILT_MODULE_PATH :=
 LOCAL_BUILT_MODULE :=
 LOCAL_INSTALLED_MODULE :=
 LOCAL_INTERMEDIATE_TARGETS :=
@@ -39,7 +38,6 @@
 include $(BUILD_SYSTEM)/module_arch_supported.mk
 ifeq ($(my_module_arch_supported),true)
 # Build for Windows
-OVERRIDE_BUILT_MODULE_PATH :=
 LOCAL_BUILT_MODULE :=
 LOCAL_MODULE_SUFFIX :=
 # We don't want makefiles using the cross-compiled host tool
@@ -56,7 +54,6 @@
 include $(BUILD_SYSTEM)/module_arch_supported.mk
 ifeq ($(my_module_arch_supported),true)
 # Build for HOST_CROSS_2ND_ARCH
-OVERRIDE_BUILT_MODULE_PATH :=
 LOCAL_BUILT_MODULE :=
 LOCAL_MODULE_SUFFIX :=
 # We don't want makefiles using the cross-compiled host tool
diff --git a/core/host_shared_library_internal.mk b/core/host_shared_library_internal.mk
index 0a3b317..da20874 100644
--- a/core/host_shared_library_internal.mk
+++ b/core/host_shared_library_internal.mk
@@ -13,9 +13,6 @@
 ifeq ($(strip $(LOCAL_MODULE_SUFFIX)),)
 LOCAL_MODULE_SUFFIX := $($(my_prefix)SHLIB_SUFFIX)
 endif
-ifneq ($(strip $(OVERRIDE_BUILT_MODULE_PATH)),)
-$(error $(LOCAL_PATH): Illegal use of OVERRIDE_BUILT_MODULE_PATH)
-endif
 ifneq ($(strip $(LOCAL_MODULE_STEM)$(LOCAL_BUILT_MODULE_STEM)),)
 $(error $(LOCAL_PATH): Cannot set module stem for a library)
 endif
@@ -34,10 +31,6 @@
 
 ifndef skip_build_from_source
 
-# Put the built modules of all shared libraries in a common directory
-# to simplify the link line.
-OVERRIDE_BUILT_MODULE_PATH := $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)OUT_INTERMEDIATE_LIBRARIES)
-
 include $(BUILD_SYSTEM)/binary.mk
 
 my_host_libprofile_rt := $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)LIBPROFILE_RT)
diff --git a/core/host_static_library.mk b/core/host_static_library.mk
index aa0421e..71f4fd9 100644
--- a/core/host_static_library.mk
+++ b/core/host_static_library.mk
@@ -23,7 +23,6 @@
 include $(BUILD_SYSTEM)/module_arch_supported.mk
 ifeq ($(my_module_arch_supported),true)
 # Build for HOST_2ND_ARCH
-OVERRIDE_BUILT_MODULE_PATH :=
 LOCAL_BUILT_MODULE :=
 LOCAL_INSTALLED_MODULE :=
 LOCAL_INTERMEDIATE_TARGETS :=
@@ -39,7 +38,6 @@
 include $(BUILD_SYSTEM)/module_arch_supported.mk
 ifeq ($(my_module_arch_supported),true)
 # Build for Windows
-OVERRIDE_BUILT_MODULE_PATH :=
 LOCAL_BUILT_MODULE :=
 LOCAL_INSTALLED_MODULE :=
 LOCAL_INTERMEDIATE_TARGETS :=
@@ -52,7 +50,6 @@
 include $(BUILD_SYSTEM)/module_arch_supported.mk
 ifeq ($(my_module_arch_supported),true)
 # Build for HOST_CROSS_2ND_ARCH
-OVERRIDE_BUILT_MODULE_PATH :=
 LOCAL_BUILT_MODULE :=
 LOCAL_INSTALLED_MODULE :=
 LOCAL_INTERMEDIATE_TARGETS :=
diff --git a/core/install_jni_libs.mk b/core/install_jni_libs.mk
index b7d83dc..01f7f10 100644
--- a/core/install_jni_libs.mk
+++ b/core/install_jni_libs.mk
@@ -18,10 +18,20 @@
 ifneq ($(filter tests samples, $(LOCAL_MODULE_TAGS)),)
 my_embed_jni := true
 endif
-ifeq ($(filter $(TARGET_OUT)/% $(TARGET_OUT_VENDOR)/% $(TARGET_OUT_OEM)/%, $(my_module_path)),)
-# If this app isn't to be installed to system partitions.
-my_embed_jni := true
+
+# If the APK is not installed in one of the following partitions, force its libraries
+# to be embedded inside the APK instead of installed to /<partition>/lib[64]/.
+supported_partition_patterns := \
+    $(TARGET_OUT)/% \
+    $(TARGET_OUT_VENDOR)/% \
+    $(TARGET_OUT_OEM)/% \
+    $(TARGET_OUT_PRODUCT)/% \
+    $(TARGET_OUT_PRODUCT_SERVICES)/% \
+
+ifeq ($(filter $(supported_partition_patterns),$(my_module_path)),)
+    my_embed_jni := true
 endif
+
 # If we're installing this APP as a compressed module, we include all JNI libraries
 # in the compressed artifact, rather than as separate files on the partition in question.
 ifdef LOCAL_COMPRESSED_MODULE
diff --git a/core/install_jni_libs_internal.mk b/core/install_jni_libs_internal.mk
index a99d88a..e786691 100644
--- a/core/install_jni_libs_internal.mk
+++ b/core/install_jni_libs_internal.mk
@@ -13,9 +13,8 @@
 #
 
 my_jni_shared_libraries := \
-    $(addprefix $($(my_2nd_arch_prefix)TARGET_OUT_INTERMEDIATE_LIBRARIES)/, \
-      $(addsuffix .so, \
-          $(LOCAL_JNI_SHARED_LIBRARIES)))
+    $(foreach lib,$(LOCAL_JNI_SHARED_LIBRARIES), \
+      $(call intermediates-dir-for,SHARED_LIBRARIES,$(lib),,,$(my_2nd_arch_prefix))/$(lib).so)
 
 # App-specific lib path.
 my_app_lib_path := $(dir $(LOCAL_INSTALLED_MODULE))lib/$(TARGET_$(my_2nd_arch_prefix)ARCH)
@@ -52,7 +51,9 @@
 my_shared_library_path := $(call get_non_asan_path,\
   $($(my_2nd_arch_prefix)TARGET_OUT$(partition_tag)_SHARED_LIBRARIES))
 # Do not use order-only dependency, because we want to rebuild the image if an jni is updated.
-$(LOCAL_INSTALLED_MODULE) : $(addprefix $(my_shared_library_path)/, $(my_jni_filenames))
+my_installed_library := $(addprefix $(my_shared_library_path)/, $(my_jni_filenames))
+$(LOCAL_INSTALLED_MODULE) : $(my_installed_library)
+ALL_MODULES.$(LOCAL_MODULE).INSTALLED += $(my_installed_library)
 
 # Create symlink in the app specific lib path
 # Skip creating this symlink when running the second part of a target sanitization build.
@@ -97,7 +98,9 @@
 $(foreach lib, $(my_prebuilt_jni_libs), \
     $(eval $(call copy-one-file, $(lib), $(my_app_lib_path)/$(notdir $(lib)))))
 
-$(LOCAL_INSTALLED_MODULE) : $(addprefix $(my_app_lib_path)/, $(notdir $(my_prebuilt_jni_libs)))
+my_installed_library := $(addprefix $(my_app_lib_path)/, $(notdir $(my_prebuilt_jni_libs)))
+$(LOCAL_INSTALLED_MODULE) : $(my_installed_library)
+ALL_MODULES.$(LOCAL_MODULE).INSTALLED += $(my_installed_library)
 endif  # my_embed_jni
 endif  # inner my_prebuilt_jni_libs
 endif  # outer my_prebuilt_jni_libs
diff --git a/core/java.mk b/core/java.mk
index 9147849..932a421 100644
--- a/core/java.mk
+++ b/core/java.mk
@@ -68,15 +68,14 @@
 full_classes_header_jar := $(intermediates.COMMON)/classes-header.jar
 full_classes_compiled_jar := $(intermediates.COMMON)/classes-full-debug.jar
 full_classes_processed_jar := $(intermediates.COMMON)/classes-processed.jar
-full_classes_desugar_jar := $(intermediates.COMMON)/classes-desugar.jar
 full_classes_jarjar_jar := $(intermediates.COMMON)/classes-jarjar.jar
-full_classes_proguard_jar := $(intermediates.COMMON)/classes-proguard.jar
 full_classes_combined_jar := $(intermediates.COMMON)/classes-combined.jar
 built_dex_intermediate := $(intermediates.COMMON)/dex/classes.dex
 built_dex_hiddenapi := $(intermediates.COMMON)/dex-hiddenapi/classes.dex
 full_classes_stubs_jar := $(intermediates.COMMON)/stubs.jar
 java_source_list_file := $(intermediates.COMMON)/java-source-list
-
+hiddenapi_flags_csv := $(intermediates.COMMON)/hiddenapi/flags.csv
+hiddenapi_metadata_csv := $(intermediates.COMMON)/hiddenapi/greylist.csv
 
 ifeq ($(LOCAL_MODULE_CLASS)$(LOCAL_SRC_FILES)$(LOCAL_STATIC_JAVA_LIBRARIES)$(LOCAL_SOURCE_FILES_ALL_GENERATED),APPS)
 # If this is an apk without any Java code (e.g. framework-res), we should skip compiling Java.
@@ -90,11 +89,9 @@
 LOCAL_INTERMEDIATE_TARGETS += \
     $(full_classes_turbine_jar) \
     $(full_classes_compiled_jar) \
-    $(full_classes_desugar_jar) \
     $(full_classes_jarjar_jar) \
     $(full_classes_jar) \
     $(full_classes_combined_jar) \
-    $(full_classes_proguard_jar) \
     $(built_dex_intermediate) \
     $(built_dex) \
     $(full_classes_stubs_jar) \
@@ -116,7 +113,7 @@
   # LOCAL_SDK_VERSION is current and no TARGET_BUILD_APPS
   aidl_preprocess_import := $(TARGET_OUT_COMMON_INTERMEDIATES)/framework.aidl
 else
-  aidl_preprocess_import := $(HISTORICAL_SDK_VERSIONS_ROOT)/$(LOCAL_SDK_VERSION)/framework.aidl
+  aidl_preprocess_import := $(call resolve-prebuilt-sdk-aidl-path,$(LOCAL_SDK_VERSION))
 endif # not current or system_current
 else
 # build against the platform.
@@ -172,6 +169,7 @@
                 $(filter %.java,$(LOCAL_GENERATED_SOURCES))
 java_intermediate_sources := $(addprefix $(TARGET_OUT_COMMON_INTERMEDIATES)/, $(filter %.java,$(LOCAL_INTERMEDIATE_SOURCES)))
 all_java_sources := $(java_sources) $(java_intermediate_sources)
+ALL_MODULES.$(my_register_name).SRCS := $(ALL_MODULES.$(my_register_name).SRCS) $(all_java_sources)
 
 include $(BUILD_SYSTEM)/java_common.mk
 
@@ -225,11 +223,6 @@
 # Deps for generated source files must be handled separately,
 # via deps on the target that generates the sources.
 
-# If error prone is enabled then add LOCAL_ERROR_PRONE_FLAGS to LOCAL_JAVACFLAGS
-ifeq ($(RUN_ERROR_PRONE),true)
-LOCAL_JAVACFLAGS += $(LOCAL_ERROR_PRONE_FLAGS)
-endif
-
 # For user / userdebug builds, strip the local variable table and the local variable
 # type table. This has no bearing on stack traces, but will leave less information
 # available via JDWP.
@@ -311,6 +304,7 @@
 
 javac-check : $(full_classes_compiled_jar)
 javac-check-$(LOCAL_MODULE) : $(full_classes_compiled_jar)
+.PHONY: javac-check-$(LOCAL_MODULE)
 
 $(full_classes_combined_jar): PRIVATE_DONT_DELETE_JAR_META_INF := $(LOCAL_DONT_DELETE_JAR_META_INF)
 $(full_classes_combined_jar): $(full_classes_compiled_jar) \
@@ -372,23 +366,7 @@
 LOCAL_DX_FLAGS := $(filter-out --multi-dex,$(LOCAL_DX_FLAGS)) --multi-dex
 endif
 
-ifneq ($(USE_D8_DESUGAR),true)
-my_desugaring :=
-ifndef LOCAL_IS_STATIC_JAVA_LIBRARY
-my_desugaring := true
-$(full_classes_desugar_jar): PRIVATE_DX_FLAGS := $(LOCAL_DX_FLAGS)
-$(full_classes_desugar_jar): $(LOCAL_FULL_CLASSES_JACOCO_JAR) $(full_java_header_libs) $(DESUGAR)
-	$(desugar-classes-jar)
-endif
-else
-my_desugaring :=
-endif
-
-ifndef my_desugaring
-full_classes_desugar_jar := $(LOCAL_FULL_CLASSES_JACOCO_JAR)
-endif
-
-full_classes_pre_proguard_jar := $(full_classes_desugar_jar)
+full_classes_pre_proguard_jar := $(LOCAL_FULL_CLASSES_JACOCO_JAR)
 
 # Keep a copy of the jar just before proguard processing.
 $(eval $(call copy-one-file,$(full_classes_pre_proguard_jar),$(intermediates.COMMON)/classes-pre-proguard.jar))
@@ -400,9 +378,10 @@
     $(error invalid value for LOCAL_PROGUARD_ENABLED: $(LOCAL_PROGUARD_ENABLED))
 endif
 proguard_dictionary := $(intermediates.COMMON)/proguard_dictionary
+proguard_configuration := $(intermediates.COMMON)/proguard_configuration
 
 # When an app contains references to APIs that are not in the SDK specified by
-# its LOCAL_SDK_VERSION for example added by support library or by runtime 
+# its LOCAL_SDK_VERSION for example added by support library or by runtime
 # classes added by desugar, we artifically raise the "SDK version" "linked" by
 # ProGuard, to
 # - suppress ProGuard warnings of referencing symbols unknown to the lower SDK version.
@@ -412,7 +391,7 @@
 ifdef LOCAL_SDK_VERSION
 ifdef TARGET_BUILD_APPS
 ifeq (,$(filter current system_current test_current core_current, $(LOCAL_SDK_VERSION)))
-  my_proguard_sdk_raise := $(call java-lib-header-files, sdk_vcurrent)
+  my_proguard_sdk_raise := $(call java-lib-header-files, $(call resolve-prebuilt-sdk-module,current))
 endif
 else
   # For platform build, we can't just raise to the "current" SDK,
@@ -421,12 +400,7 @@
 endif
 endif
 
-ifeq ($(USE_R8),true)
-proguard_jars_prefix := -libraryjars
-else
-proguard_jars_prefix := -systemjars
-endif
-legacy_proguard_flags := $(addprefix $(proguard_jars_prefix) ,$(my_proguard_sdk_raise) \
+legacy_proguard_flags := $(addprefix -libraryjars ,$(my_proguard_sdk_raise) \
   $(filter-out $(my_proguard_sdk_raise), \
     $(full_java_bootclasspath_libs) \
     $(full_shared_java_header_libs)))
@@ -435,6 +409,7 @@
   $(filter-out $(my_proguard_sdk_raise),$(full_shared_java_header_libs))
 
 legacy_proguard_flags += -printmapping $(proguard_dictionary)
+legacy_proguard_flags += -printconfiguration $(proguard_configuration)
 
 common_proguard_flags := -forceprocessing
 
@@ -443,7 +418,7 @@
 common_proguard_flags += -dontshrink # don't shrink tests by default
 endif # test package
 ifneq ($(LOCAL_PROGUARD_ENABLED),custom)
-  ifdef LOCAL_USE_AAPT2
+  ifeq ($(LOCAL_USE_AAPT2),true)
     common_proguard_flag_files += $(foreach l,$(LOCAL_STATIC_ANDROID_LIBRARIES),\
         $(call intermediates-dir-for,JAVA_LIBRARIES,$(l),,COMMON)/export_proguard_flags)
   endif
@@ -479,21 +454,20 @@
     -applymapping $(link_instr_intermediates_dir.COMMON)/proguard_dictionary \
     -verbose \
     $(legacy_proguard_flags)
+legacy_proguard_lib_deps += \
+  $(link_instr_classes_jar) \
+  $(link_instr_intermediates_dir.COMMON)/proguard_options \
+  $(link_instr_intermediates_dir.COMMON)/proguard_dictionary \
 
 # Sometimes (test + main app) uses different keep rules from the main app -
 # apply the main app's dictionary anyway.
 legacy_proguard_flags += -ignorewarnings
 
-# Make sure we run Proguard on the main app first
-$(full_classes_proguard_jar) : $(link_instr_intermediates_dir.COMMON)/proguard.classes.jar
-
 endif # no obfuscation
 endif # LOCAL_INSTRUMENTATION_FOR
 
 proguard_flag_files := $(addprefix $(LOCAL_PATH)/, $(LOCAL_PROGUARD_FLAG_FILES))
-ifeq ($(USE_R8),true)
 proguard_flag_files += $(addprefix $(LOCAL_PATH)/, $(LOCAL_R8_FLAG_FILES))
-endif # USE_R8
 LOCAL_PROGUARD_FLAGS += $(addprefix -include , $(proguard_flag_files))
 
 ifdef LOCAL_TEST_MODULE_TO_PROGUARD_WITH
@@ -503,58 +477,37 @@
 endif
 
 ifneq ($(filter obfuscation,$(LOCAL_PROGUARD_ENABLED)),)
-ifneq ($(USE_R8),true)
-  $(full_classes_proguard_jar): .KATI_IMPLICIT_OUTPUTS := $(proguard_dictionary)
-else
-  $(built_dex_intermediate): .KATI_IMPLICIT_OUTPUTS := $(proguard_dictionary)
+  $(built_dex_intermediate): .KATI_IMPLICIT_OUTPUTS := $(proguard_dictionary) $(proguard_configuration)
 endif
-endif
-
-# If R8 is not enabled run Proguard.
-ifneq ($(USE_R8),true)
-# Changes to these dependencies need to be replicated below when using R8
-# instead of Proguard + dx.
-$(full_classes_proguard_jar): PRIVATE_EXTRA_INPUT_JAR := $(extra_input_jar)
-$(full_classes_proguard_jar): PRIVATE_PROGUARD_FLAGS := $(legacy_proguard_flags) $(common_proguard_flags) $(LOCAL_PROGUARD_FLAGS)
-$(full_classes_proguard_jar) : $(full_classes_pre_proguard_jar) $(extra_input_jar) $(my_proguard_sdk_raise) $(common_proguard_flag_files) $(proguard_flag_files) $(legacy_proguard_lib_deps) | $(PROGUARD)
-	$(call transform-jar-to-proguard)
-else # !USE_R8
-# Running R8 instead of Proguard, proguarded jar is actually the pre-Proguarded jar.
-full_classes_proguard_jar := $(full_classes_pre_proguard_jar)
-endif # !USE_R8
 
 else  # LOCAL_PROGUARD_ENABLED not defined
 proguard_flag_files :=
-full_classes_proguard_jar := $(full_classes_pre_proguard_jar)
 endif # LOCAL_PROGUARD_ENABLED defined
 
 ifneq ($(LOCAL_IS_STATIC_JAVA_LIBRARY),true)
 $(built_dex_intermediate): PRIVATE_DX_FLAGS := $(LOCAL_DX_FLAGS)
 
-my_r8 :=
 ifdef LOCAL_PROGUARD_ENABLED
-ifeq ($(USE_R8),true)
-# These are the dependencies for the proguarded jar when running
-# Proguard + dx. They are used for the generated dex when using R8, as
-# R8 does Proguard + dx
-my_r8 := true
-$(built_dex_intermediate): PRIVATE_EXTRA_INPUT_JAR := $(extra_input_jar)
-$(built_dex_intermediate): PRIVATE_PROGUARD_FLAGS := $(legacy_proguard_flags) $(common_proguard_flags) $(LOCAL_PROGUARD_FLAGS)
-$(built_dex_intermediate) : $(full_classes_proguard_jar) $(extra_input_jar) $(my_support_library_sdk_raise) $(common_proguard_flag_files) $(proguard_flag_files) $(legacy_proguard_lib_deps) $(R8_COMPAT_PROGUARD)
+  $(built_dex_intermediate): PRIVATE_EXTRA_INPUT_JAR := $(extra_input_jar)
+  $(built_dex_intermediate): PRIVATE_PROGUARD_FLAGS := $(legacy_proguard_flags) $(common_proguard_flags) $(LOCAL_PROGUARD_FLAGS)
+  $(built_dex_intermediate): PRIVATE_PROGUARD_DICTIONARY := $(proguard_dictionary)
+  $(built_dex_intermediate) : $(full_classes_pre_proguard_jar) $(extra_input_jar) $(my_proguard_sdk_raise) $(common_proguard_flag_files) $(proguard_flag_files) $(legacy_proguard_lib_deps) $(R8_COMPAT_PROGUARD)
 	$(transform-jar-to-dex-r8)
-endif # USE_R8
-endif # LOCAL_PROGUARD_ENABLED
-
-ifndef my_r8
-$(built_dex_intermediate): $(full_classes_proguard_jar) $(DX) $(ZIP2ZIP)
-ifneq ($(USE_D8_DESUGAR),true)
+else # !LOCAL_PROGUARD_ENABLED
+  $(built_dex_intermediate): PRIVATE_D8_LIBS := $(full_java_bootclasspath_libs) $(full_shared_java_header_libs)
+  $(built_dex_intermediate): $(full_java_bootclasspath_libs) $(full_shared_java_header_libs)
+  $(built_dex_intermediate): $(full_classes_pre_proguard_jar) $(DX) $(ZIP2ZIP)
 	$(transform-classes.jar-to-dex)
-else
-	$(transform-classes-d8.jar-to-dex)
-endif
 endif
 
 ifneq ($(filter $(LOCAL_MODULE),$(PRODUCT_BOOT_JARS)),) # is_boot_jar
+  # Derive API greylist from the classes jar.
+  # We use full_classes_pre_proguard_jar here, as that is what is converted to
+  # dex later on. The difference is academic currently, as we don't proguard any
+  # bootclasspath code at the moment. If we were to do that, we should add keep
+  # rules for all members with the @UnsupportedAppUsage annotation.
+  $(eval $(call hiddenapi-generate-csv, $(full_classes_pre_proguard_jar),$(hiddenapi_flags_csv),$(hiddenapi_metadata_csv)))
+  LOCAL_INTERMEDIATE_TARGETS += $(hiddenapi_flags_csv) $(hiddenapi_metadata_csv)
   $(eval $(call hiddenapi-copy-dex-files,$(built_dex_intermediate),$(built_dex_hiddenapi)))
   built_dex_copy_from := $(built_dex_hiddenapi)
 else # !is_boot_jar
@@ -587,6 +540,7 @@
 findbugs_html := $(PRODUCT_OUT)/findbugs/$(LOCAL_MODULE).html
 $(findbugs_html) : PRIVATE_XML_FILE := $(findbugs_xml)
 $(LOCAL_MODULE)-findbugs : $(findbugs_html)
+.PHONY: $(LOCAL_MODULE)-findbugs
 $(findbugs_html) : $(findbugs_xml)
 	@mkdir -p $(dir $@)
 	@echo ConvertXmlToText: $@
diff --git a/core/java_common.mk b/core/java_common.mk
index 8f4611e..f4c47c8 100644
--- a/core/java_common.mk
+++ b/core/java_common.mk
@@ -6,6 +6,10 @@
 my_soong_problems += dotdot_srcs
 endif
 
+ifneq (,$(LOCAL_JNI_SHARED_LIBRARIES))
+my_soong_problems += jni_libs
+endif
+
 ###########################################################
 ## Java version
 ###########################################################
@@ -76,6 +80,7 @@
 $(proto_java_sources_file_stamp): PRIVATE_PROTO_INCLUDES := $(TOP)
 $(proto_java_sources_file_stamp): PRIVATE_PROTO_SRC_FILES := $(proto_sources_fullpath)
 $(proto_java_sources_file_stamp): PRIVATE_PROTO_JAVA_OUTPUT_DIR := $(proto_java_sources_dir)
+$(proto_java_sources_file_stamp): PRIVATE_PROTOC_FLAGS := $(LOCAL_PROTOC_FLAGS)
 ifeq ($(LOCAL_PROTOC_OPTIMIZE_TYPE),micro)
 $(proto_java_sources_file_stamp): PRIVATE_PROTO_JAVA_OUTPUT_OPTION := --javamicro_out
 else
@@ -84,13 +89,13 @@
   else
     ifeq ($(LOCAL_PROTOC_OPTIMIZE_TYPE),stream)
 $(proto_java_sources_file_stamp): PRIVATE_PROTO_JAVA_OUTPUT_OPTION := --javastream_out
+$(proto_java_sources_file_stamp): PRIVATE_PROTOC_FLAGS += --plugin=$(HOST_OUT_EXECUTABLES)/protoc-gen-javastream
 $(proto_java_sources_file_stamp): $(HOST_OUT_EXECUTABLES)/protoc-gen-javastream
     else
 $(proto_java_sources_file_stamp): PRIVATE_PROTO_JAVA_OUTPUT_OPTION := --java_out
     endif
   endif
 endif
-$(proto_java_sources_file_stamp): PRIVATE_PROTOC_FLAGS := $(LOCAL_PROTOC_FLAGS)
 $(proto_java_sources_file_stamp): PRIVATE_PROTO_JAVA_OUTPUT_PARAMS := $(if $(filter lite,$(LOCAL_PROTOC_OPTIMIZE_TYPE)),lite$(if $(LOCAL_PROTO_JAVA_OUTPUT_PARAMS),:,),)$(LOCAL_PROTO_JAVA_OUTPUT_PARAMS)
 $(proto_java_sources_file_stamp) : $(proto_sources_fullpath) $(PROTOC)
 	$(call transform-proto-to-java)
@@ -193,16 +198,25 @@
 
 annotation_processor_flags :=
 annotation_processor_deps :=
+annotation_processor_jars :=
+
+# If error prone is enabled then add LOCAL_ERROR_PRONE_FLAGS to LOCAL_JAVACFLAGS
+ifeq ($(RUN_ERROR_PRONE),true)
+annotation_processor_jars += $(ERROR_PRONE_JARS)
+LOCAL_JAVACFLAGS += $(ERROR_PRONE_FLAGS)
+LOCAL_JAVACFLAGS += '-Xplugin:ErrorProne $(ERROR_PRONE_CHECKS) $(LOCAL_ERROR_PRONE_FLAGS)'
+endif
 
 ifdef LOCAL_ANNOTATION_PROCESSORS
-  annotation_processor_jars := $(call java-lib-files,$(LOCAL_ANNOTATION_PROCESSORS),true)
-  annotation_processor_flags += -processorpath $(call normalize-path-list,$(annotation_processor_jars))
-  annotation_processor_deps += $(annotation_processor_jars)
+  annotation_processor_jars += $(call java-lib-files,$(LOCAL_ANNOTATION_PROCESSORS),true)
 
   # b/25860419: annotation processors must be explicitly specified for grok
   annotation_processor_flags += $(foreach class,$(LOCAL_ANNOTATION_PROCESSOR_CLASSES),-processor $(class))
+endif
 
-  annotation_processor_jars :=
+ifneq (,$(strip $(annotation_processor_jars)))
+annotation_processor_flags += -processorpath $(call normalize-path-list,$(annotation_processor_jars))
+annotation_processor_deps += $(annotation_processor_jars)
 endif
 
 full_static_java_libs := $(call java-lib-files,$(LOCAL_STATIC_JAVA_LIBRARIES),$(LOCAL_IS_HOST_MODULE))
@@ -225,11 +239,29 @@
 
 $(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_RMTYPEDEFS := $(LOCAL_RMTYPEDEFS)
 
+# Sanity check class path vars.
+disallowed_deps := $(foreach sdk,$(TARGET_AVAILABLE_SDK_VERSIONS),$(call resolve-prebuilt-sdk-module,$(sdk)))
+disallowed_deps += $(foreach sdk,$(TARGET_AVAILABLE_SDK_VERSIONS),\
+  $(foreach sdk_lib,$(JAVA_SDK_LIBRARIES),$(call resolve-prebuilt-sdk-module,$(sdk),$(sdk_lib))))
+bad_deps := $(filter $(disallowed_deps),$(LOCAL_JAVA_LIBRARIES) $(LOCAL_STATIC_JAVA_LIBRARIES))
+ifneq (,$(bad_deps))
+  $(call pretty-error,SDK modules should not be depended on directly. Please use LOCAL_SDK_VERSION for $(bad_deps))
+endif
+
 full_java_bootclasspath_libs :=
 empty_bootclasspath :=
 my_system_modules :=
+exported_sdk_libs_files :=
+my_exported_sdk_libs_file :=
 
 ifndef LOCAL_IS_HOST_MODULE
+  sdk_libs :=
+
+  # When an sdk lib name is listed in LOCAL_JAVA_LIBRARIES, move it to LOCAL_SDK_LIBRARIES, so that
+  # it is correctly redirected to the stubs library.
+  LOCAL_SDK_LIBRARIES += $(filter $(JAVA_SDK_LIBRARIES),$(LOCAL_JAVA_LIBRARIES))
+  LOCAL_JAVA_LIBRARIES := $(filter-out $(JAVA_SDK_LIBRARIES),$(LOCAL_JAVA_LIBRARIES))
+
   ifeq ($(LOCAL_SDK_VERSION),)
     ifeq ($(LOCAL_NO_STANDARD_LIBRARIES),true)
       # No bootclasspath. But we still need "" to prevent javac from using default host bootclasspath.
@@ -243,6 +275,13 @@
       LOCAL_JAVA_LIBRARIES := $(filter-out $(TARGET_DEFAULT_BOOTCLASSPATH_LIBRARIES) $(TARGET_DEFAULT_JAVA_LIBRARIES),$(LOCAL_JAVA_LIBRARIES))
       my_system_modules := $(DEFAULT_SYSTEM_MODULES)
     endif  # LOCAL_NO_STANDARD_LIBRARIES
+
+    ifneq (,$(TARGET_BUILD_APPS))
+      sdk_libs := $(foreach lib_name,$(LOCAL_SDK_LIBRARIES),$(call resolve-prebuilt-sdk-module,system_current,$(lib_name)))
+    else
+      # When SDK libraries are referenced from modules built without SDK, provide the all APIs to them
+      sdk_libs := $(foreach lib_name,$(LOCAL_SDK_LIBRARIES),$(lib_name).impl)
+    endif
   else
     ifeq ($(LOCAL_NO_STANDARD_LIBRARIES),true)
       $(call pretty-error,Must not define both LOCAL_NO_STANDARD_LIBRARIES and LOCAL_SDK_VERSION)
@@ -251,22 +290,30 @@
       $(call pretty-error,Invalid LOCAL_SDK_VERSION '$(LOCAL_SDK_VERSION)' \
              Choices are: $(TARGET_AVAILABLE_SDK_VERSIONS))
     endif
-    ifeq ($(LOCAL_SDK_VERSION)$(TARGET_BUILD_APPS),current)
-      # LOCAL_SDK_VERSION is current and no TARGET_BUILD_APPS.
-      full_java_bootclasspath_libs := $(call java-lib-header-files,android_stubs_current)
-    else ifeq ($(LOCAL_SDK_VERSION)$(TARGET_BUILD_APPS),system_current)
-      full_java_bootclasspath_libs := $(call java-lib-header-files,android_system_stubs_current)
-    else ifeq ($(LOCAL_SDK_VERSION)$(TARGET_BUILD_APPS),test_current)
-      full_java_bootclasspath_libs := $(call java-lib-header-files,android_test_stubs_current)
-    else ifeq ($(LOCAL_SDK_VERSION)$(TARGET_BUILD_APPS),core_current)
-      full_java_bootclasspath_libs := $(call java-lib-header-files,core.current.stubs)
+
+    ifneq (,$(TARGET_BUILD_APPS)$(filter-out %current,$(LOCAL_SDK_VERSION)))
+      # TARGET_BUILD_APPS mode or numbered SDK. Use prebuilt modules.
+      sdk_module := $(call resolve-prebuilt-sdk-module,$(LOCAL_SDK_VERSION))
+      sdk_libs := $(foreach lib_name,$(LOCAL_SDK_LIBRARIES),$(call resolve-prebuilt-sdk-module,$(LOCAL_SDK_VERSION),$(lib_name)))
     else
-      # core_<ver> is subset of <ver>. Instead of defining a prebuilt lib for core_<ver>,
-      # use the stub for <ver> when building for apps.
-      _version := $(patsubst core_%,%,$(LOCAL_SDK_VERSION))
-      full_java_bootclasspath_libs := $(call java-lib-header-files,sdk_v$(_version))
-      _version :=
-    endif # current, system_current, system_${VER}, test_current or core_current
+      # Note: the lib naming scheme must be kept in sync with build/soong/java/sdk_library.go.
+      sdk_lib_suffix = $(call pretty-error,sdk_lib_suffix was not set correctly)
+      ifeq (current,$(LOCAL_SDK_VERSION))
+        sdk_module := android_stubs_current
+        sdk_lib_suffix := .stubs
+      else ifeq (system_current,$(LOCAL_SDK_VERSION))
+        sdk_module := android_system_stubs_current
+        sdk_lib_suffix := .stubs.system
+      else ifeq (test_current,$(LOCAL_SDK_VERSION))
+        sdk_module := android_test_stubs_current
+        sdk_lib_suffix := .stubs.test
+      else ifeq (core_current,$(LOCAL_SDK_VERSION))
+        sdk_module := core.current.stubs
+        sdk_lib_suffix = $(call pretty-error,LOCAL_SDK_LIBRARIES not supported for LOCAL_SDK_VERSION = core_current)
+      endif
+      sdk_libs := $(foreach lib_name,$(LOCAL_SDK_LIBRARIES),$(lib_name)$(sdk_lib_suffix))
+    endif
+    full_java_bootclasspath_libs := $(call java-lib-header-files,$(sdk_module))
   endif # LOCAL_SDK_VERSION
 
   ifneq ($(LOCAL_NO_STANDARD_LIBRARIES),true)
@@ -292,9 +339,16 @@
       full_java_bootclasspath_libs += $(call java-lib-header-files,core-lambda-stubs)
     endif
   endif
+  full_shared_java_libs := $(call java-lib-files,$(LOCAL_JAVA_LIBRARIES) $(sdk_libs),$(LOCAL_IS_HOST_MODULE))
+  full_shared_java_header_libs := $(call java-lib-header-files,$(LOCAL_JAVA_LIBRARIES) $(sdk_libs),$(LOCAL_IS_HOST_MODULE))
+  sdk_libs :=
 
-  full_shared_java_libs := $(call java-lib-files,$(LOCAL_JAVA_LIBRARIES),$(LOCAL_IS_HOST_MODULE))
-  full_shared_java_header_libs := $(call java-lib-header-files,$(LOCAL_JAVA_LIBRARIES),$(LOCAL_IS_HOST_MODULE))
+  # Files that contains the names of SDK libraries exported from dependencies. These will be re-exported.
+  # Note: No need to consider LOCAL_*_ANDROID_LIBRARIES and LOCAL_STATIC_JAVA_AAR_LIBRARIES. They are all appended to
+  # LOCAL_*_JAVA_LIBRARIES in java.mk
+  exported_sdk_libs_files := $(call exported-sdk-libs-files,$(LOCAL_JAVA_LIBRARIES) $(LOCAL_STATIC_JAVA_LIBRARIES))
+  # The file that contains the names of all SDK libraries that this module exports and re-exports
+  my_exported_sdk_libs_file := $(call local-intermediates-dir,COMMON)/exported-sdk-libs
 
 else # LOCAL_IS_HOST_MODULE
 
@@ -332,6 +386,22 @@
   endif # USE_CORE_LIB_BOOTCLASSPATH
 endif # !LOCAL_IS_HOST_MODULE
 
+
+# Export the SDK libs. The sdk library names listed in LOCAL_SDK_LIBRARIES are first exported.
+# Then sdk library names exported from dependencies are all re-exported.
+$(my_exported_sdk_libs_file): PRIVATE_EXPORTED_SDK_LIBS_FILES := $(exported_sdk_libs_files)
+$(my_exported_sdk_libs_file): PRIVATE_SDK_LIBS := $(sort $(LOCAL_SDK_LIBRARIES))
+$(my_exported_sdk_libs_file): $(exported_sdk_libs_files)
+	@echo "Export SDK libs $@"
+	$(hide) mkdir -p $(dir $@) && rm -f $@ $@.temp
+	$(if $(PRIVATE_SDK_LIBS),\
+		echo $(PRIVATE_SDK_LIBS) | tr ' ' '\n' > $@.temp,\
+		touch $@.temp)
+	$(if $(PRIVATE_EXPORTED_SDK_LIBS_FILES),\
+		cat $(PRIVATE_EXPORTED_SDK_LIBS_FILES) >> $@.temp)
+	$(hide) cat $@.temp | sort -u > $@
+	$(hide) rm -f $@.temp
+
 ifdef empty_bootclasspath
   ifdef full_java_bootclasspath_libs
     $(call pretty-error,internal error: empty_bootclasspath and full_java_bootclasspath_libs should not both be set)
@@ -429,7 +499,7 @@
 ifeq ($(ONE_SHOT_MAKEFILE),)
 installed_static_library_notice_file_targets := \
     $(foreach lib,$(LOCAL_STATIC_JAVA_LIBRARIES), \
-      NOTICE-$(if $(LOCAL_IS_HOST_MODULE),HOST,TARGET)-JAVA_LIBRARIES-$(lib))
+      NOTICE-$(if $(LOCAL_IS_HOST_MODULE),HOST$(if $(my_host_cross),_CROSS,),TARGET)-JAVA_LIBRARIES-$(lib))
 else
 installed_static_library_notice_file_targets :=
 endif
@@ -466,7 +536,7 @@
 ifdef LOCAL_AAPT2_ONLY
 my_link_type += aapt2_only
 endif
-ifdef LOCAL_USE_AAPT2
+ifeq ($(LOCAL_USE_AAPT2),true)
 my_allowed_types += aapt2_only
 endif
 
diff --git a/core/java_host_test_config_template.xml b/core/java_host_test_config_template.xml
new file mode 100644
index 0000000..d808001
--- /dev/null
+++ b/core/java_host_test_config_template.xml
@@ -0,0 +1,23 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2018 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<!-- This test config file is auto-generated. -->
+<configuration description="Runs {MODULE}">
+    <option name="test-suite-tag" value="apct" />
+    <option name="test-suite-tag" value="apct-junit" />
+    <test class="com.android.tradefed.testtype.HostTest" >
+        <option name="jar" value="{MODULE}.jar" />
+    </test>
+</configuration>
diff --git a/core/java_library.mk b/core/java_library.mk
index 1b914f5..e4e51d8 100644
--- a/core/java_library.mk
+++ b/core/java_library.mk
@@ -57,19 +57,22 @@
 ifeq ($(LOCAL_IS_STATIC_JAVA_LIBRARY),true)
 # There are some dependencies outside the build system that assume classes.jar
 # is available as javalib.jar so copy it there too.
-$(eval $(call copy-one-file,$(full_classes_proguard_jar),$(common_javalib.jar)))
+$(eval $(call copy-one-file,$(full_classes_pre_proguard_jar),$(common_javalib.jar)))
 
-$(eval $(call copy-one-file,$(full_classes_proguard_jar),$(LOCAL_BUILT_MODULE)))
+$(eval $(call copy-one-file,$(full_classes_pre_proguard_jar),$(LOCAL_BUILT_MODULE)))
 
 else # !LOCAL_IS_STATIC_JAVA_LIBRARY
 
 $(common_javalib.jar): PRIVATE_DEX_FILE := $(built_dex)
 $(common_javalib.jar): PRIVATE_SOURCE_ARCHIVE := $(full_classes_pre_proguard_jar)
-$(common_javalib.jar): PRIVATE_DONT_DELETE_JAR_DIRS := $(LOCAL_DONT_DELETE_JAR_DIRS)
+$(common_javalib.jar): $(MERGE_ZIPS) $(SOONG_ZIP) $(ZIP2ZIP)
 $(common_javalib.jar) : $(built_dex) $(java_resource_sources) | $(ZIPTIME) $(ZIPALIGN)
 	@echo "target Jar: $(PRIVATE_MODULE) ($@)"
-	$(call initialize-package-file,$(PRIVATE_SOURCE_ARCHIVE),$@.tmp)
-	$(call add-dex-to-package-arg,$@.tmp)
+	rm -rf $@.parts && mkdir -p $@.parts
+	$(call create-dex-jar,$@.parts/dex.zip,$(PRIVATE_DEX_FILE))
+	$(call extract-resources-jar,$@.parts/res.zip,$(PRIVATE_SOURCE_ARCHIVE))
+	$(MERGE_ZIPS) -j $@.tmp $@.parts/dex.zip $@.parts/res.zip
+	rm -rf $@.parts
 	$(hide) $(ZIPTIME) $@.tmp
 	$(call commit-change-for-toc,$@)
 ifeq (true, $(LOCAL_UNCOMPRESS_DEX))
@@ -93,7 +96,7 @@
 	@echo "Dexpreopt Jar: $(PRIVATE_MODULE) ($@)"
 	$(call dexpreopt-one-file,$<,$@)
 
-$(eval $(call dexpreopt-copy-jar,$(common_javalib.jar),$(LOCAL_BUILT_MODULE),$(LOCAL_DEX_PREOPT)))
+$(eval $(call dexpreopt-copy-jar,$(common_javalib.jar),$(LOCAL_BUILT_MODULE),$(LOCAL_STRIP_DEX)))
 
 endif # ! boot jar
 
diff --git a/core/java_renderscript.mk b/core/java_renderscript.mk
index 191b3be..406d679 100644
--- a/core/java_renderscript.mk
+++ b/core/java_renderscript.mk
@@ -75,7 +75,7 @@
 $(rs_generated_src_jar): PRIVATE_RS_FLAGS := $(renderscript_flags)
 $(rs_generated_src_jar): PRIVATE_RS_SOURCE_FILES := $(renderscript_sources_fullpath)
 $(rs_generated_src_jar): PRIVATE_RS_OUTPUT_DIR := $(renderscript_intermediate.COMMON)
-$(rs_generated_src_jar): PRIVATE_RS_TARGET_API := $(renderscript_target_api)
+$(rs_generated_src_jar): PRIVATE_RS_TARGET_API := $(patsubst current,0,$(renderscript_target_api))
 $(rs_generated_src_jar): PRIVATE_DEP_FILES := $(bc_dep_files)
 $(rs_generated_src_jar): PRIVATE_RS_OUTPUT_RES_ZIP := $(rs_generated_res_zip)
 $(rs_generated_src_jar): .KATI_IMPLICIT_OUTPUTS := $(rs_generated_res_zip)
@@ -107,7 +107,7 @@
 # Prevent these from showing up on the device
 # One exception is librsjni.so, which is needed for
 # both native path and compat path.
-rs_jni_lib := $(TARGET_OUT_INTERMEDIATE_LIBRARIES)/librsjni.so
+rs_jni_lib := $(call intermediates-dir-for,SHARED_LIBRARIES,librsjni.so)/librsjni.so
 LOCAL_JNI_SHARED_LIBRARIES += librsjni
 
 ifneq (,$(TARGET_BUILD_APPS)$(FORCE_BUILD_RS_COMPAT))
@@ -118,13 +118,13 @@
 
 $(rs_generated_src_jar): .KATI_IMPLICIT_OUTPUTS += $(rs_generated_bc)
 
-rs_support_lib := $(TARGET_OUT_INTERMEDIATE_LIBRARIES)/libRSSupport.so
+rs_support_lib := $(call intermediates-dir-for,SHARED_LIBRARIES,libRSSupport)/libRSSupport.so
 LOCAL_JNI_SHARED_LIBRARIES += libRSSupport
 
 rs_support_io_lib :=
 # check if the target api level support USAGE_IO
 ifeq ($(filter $(RSCOMPAT_NO_USAGEIO_API_LEVELS),$(renderscript_target_api)),)
-rs_support_io_lib := $(TARGET_OUT_INTERMEDIATE_LIBRARIES)/libRSSupportIO.so
+rs_support_io_lib := $(call intermediates-dir-for,SHARED_LIBRARIES,libRSSupportIO)/libRSSupportIO.so
 LOCAL_JNI_SHARED_LIBRARIES += libRSSupportIO
 endif
 
@@ -138,7 +138,7 @@
 $(rs_compatibility_jni_libs): $(RS_PREBUILT_CLCORE) \
     $(rs_support_lib) $(rs_support_io_lib) $(rs_jni_lib) $(rs_compiler_rt)
 $(rs_compatibility_jni_libs): $(BCC_COMPAT)
-$(rs_compatibility_jni_libs): PRIVATE_CXX := $(CXX_WRAPPER) $(TARGET_CXX)
+$(rs_compatibility_jni_libs): PRIVATE_CXX := $(CXX_WRAPPER) $(CLANG_CXX)
 $(rs_compatibility_jni_libs): PRIVATE_SDK_VERSION := $(my_min_sdk_version)
 $(rs_compatibility_jni_libs): $(renderscript_intermediate)/librs.%.so: \
     $(renderscript_intermediate.bc_folder)%.bc \
diff --git a/core/java_test_config_template.xml b/core/java_test_config_template.xml
new file mode 100644
index 0000000..4ee5b07
--- /dev/null
+++ b/core/java_test_config_template.xml
@@ -0,0 +1,30 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2018 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<!-- This test config file is auto-generated. -->
+<configuration description="Runs {MODULE}.">
+    <option name="test-suite-tag" value="apct" />
+    <option name="test-suite-tag" value="apct-junit" />
+    <target_preparer class="com.android.compatibility.common.tradefed.targetprep.FilePusher">
+        <option name="cleanup" value="true" />
+        <option name="push" value="cts-dalvik-device-test-runner.jar->/data/local/tmp/{MODULE}/cts-dalvik-device-test-runner.jar" />
+        <option name="push" value="{MODULE}.jar->/data/local/tmp/{MODULE}/{MODULE}.jar" />
+    </target_preparer>
+    <test class="com.android.compatibility.testtype.DalvikTest" >
+        <option name="run-name" value="{MODULE}" />
+        <option name="classpath" value="/data/local/tmp/{MODULE}/{MODULE}.jar" />
+        <option name="classpath" value="/data/local/tmp/{MODULE}/cts-dalvik-device-test-runner.jar" />
+    </test>
+</configuration>
diff --git a/core/jetifier.mk b/core/jetifier.mk
index 33a4624..fff4230 100644
--- a/core/jetifier.mk
+++ b/core/jetifier.mk
@@ -24,7 +24,7 @@
 
 $(my_jetifier_output_path) : $(my_jetifier_input_path) $(JETIFIER)
 	rm -rf $@
-	$(JETIFIER) -outputfile $@ -i $<
+	$(JETIFIER) -l error -o $@ -i $<
 
   LOCAL_JETIFIER_OUTPUT_FILE := $(my_jetifier_output_path)
   LOCAL_INTERMEDIATE_TARGETS += $(LOCAL_JETIFIER_OUTPUT_FILE)
diff --git a/core/json.mk b/core/json.mk
new file mode 100644
index 0000000..ba8ffa7
--- /dev/null
+++ b/core/json.mk
@@ -0,0 +1,35 @@
+4space :=$= $(space)$(space)$(space)$(space)
+invert_bool =$= $(if $(strip $(1)),,true)
+
+# Converts a list to a JSON list.
+# $1: List separator.
+# $2: List.
+_json_list =$= [$(if $(2),"$(subst $(1),"$(comma)",$(2))")]
+
+# Converts a space-separated list to a JSON list.
+json_list =$= $(call _json_list,$(space),$(1))
+
+# Converts a comma-separated list to a JSON list.
+csv_to_json_list =$= $(call _json_list,$(comma),$(1))
+
+# Adds or removes 4 spaces from _json_indent
+json_increase_indent =$= $(eval _json_indent := $$(_json_indent)$$(4space))
+json_decrease_indent =$= $(eval _json_indent := $$(subst _,$$(space),$$(patsubst %____,%,$$(subst $$(space),_,$$(_json_indent)))))
+
+# 1: Key name
+# 2: Value
+add_json_val =$= $(eval _json_contents := $$(_json_contents)$$(_json_indent)"$$(strip $$(1))": $$(strip $$(2))$$(comma)$$(newline))
+add_json_str =$= $(call add_json_val,$(1),"$(strip $(2))")
+add_json_list =$= $(call add_json_val,$(1),$(call json_list,$(patsubst %,%,$(2))))
+add_json_csv =$= $(call add_json_val,$(1),$(call csv_to_json_list,$(strip $(2))))
+add_json_bool =$= $(call add_json_val,$(1),$(if $(strip $(2)),true,false))
+add_json_map =$= $(eval _json_contents := $$(_json_contents)$$(_json_indent)"$$(strip $$(1))": {$$(newline))$(json_increase_indent)
+end_json_map =$= $(json_decrease_indent)$(eval _json_contents := $$(_json_contents)$$(if $$(filter %$$(comma),$$(lastword $$(_json_contents))),__SV_END)$$(_json_indent)},$$(newline))
+
+# Clears _json_contents to start a new json file
+json_start =$= $(eval _json_contents := {$$(newline))$(eval _json_indent := $$(4space))
+
+# Adds the trailing close brace to _json_contents, and removes any trailing commas if necessary
+json_end =$= $(eval _json_contents := $$(subst $$(comma)$$(newline)__SV_END,$$(newline),$$(_json_contents)__SV_END}$$(newline)))
+
+json_contents =$= $(_json_contents)
diff --git a/core/local_systemsdk.mk b/core/local_systemsdk.mk
index 49085fd..7acb57a 100644
--- a/core/local_systemsdk.mk
+++ b/core/local_systemsdk.mk
@@ -25,7 +25,7 @@
   ifneq (,$(filter JAVA_LIBRARIES APPS,$(LOCAL_MODULE_CLASS)))
     ifndef LOCAL_SDK_VERSION
       ifeq ($(_is_vendor_app),true)
-        ifeq (,$(findstring __auto_generated_rro,$(LOCAL_MODULE)))
+        ifeq (,$(filter framework-res__auto_generated_rro,$(LOCAL_MODULE)))
           # Runtime resource overlay for framework-res is exempted from building
           # against System SDK.
           # TODO(b/35859726): remove this exception
diff --git a/core/local_vndk.mk b/core/local_vndk.mk
index 3677d40..198e361 100644
--- a/core/local_vndk.mk
+++ b/core/local_vndk.mk
@@ -1,5 +1,5 @@
 
-#Set LOCAL_USE_VNDK for modules going into vendor partition, except for host modules
+#Set LOCAL_USE_VNDK for modules going into vendor or odm partition, except for host modules
 #If LOCAL_SDK_VERSION is set, thats a more restrictive set, so they dont need LOCAL_USE_VNDK
 ifndef LOCAL_IS_HOST_MODULE
 ifndef LOCAL_SDK_VERSION
diff --git a/core/main.mk b/core/main.mk
index 1946edb..9fd1c35 100644
--- a/core/main.mk
+++ b/core/main.mk
@@ -26,6 +26,8 @@
 
 else # KATI
 
+$(info [1/1] initializing build system ...)
+
 # Absolute path of the present working direcotry.
 # This overrides the shell variable $PWD, which does not necessarily points to
 # the top of the source tree, for example when "make -C" is used in m/mm/mmm.
@@ -34,8 +36,6 @@
 TOP := .
 TOPDIR :=
 
-BUILD_SYSTEM := $(TOPDIR)build/make/core
-
 # This is the default target.  It must be the first declared target.
 .PHONY: droid
 DEFAULT_GOAL := droid
@@ -46,7 +46,7 @@
 
 # Set up various standard variables based on configuration
 # and host information.
-include $(BUILD_SYSTEM)/config.mk
+include build/make/core/config.mk
 
 ifneq ($(filter $(dont_bother_goals), $(MAKECMDGOALS)),)
 dont_bother := true
@@ -66,12 +66,15 @@
 $(shell mkdir -p $(OUT_DIR) && \
     echo -n $(BUILD_NUMBER) > $(OUT_DIR)/build_number.txt)
 BUILD_NUMBER_FILE := $(OUT_DIR)/build_number.txt
+.KATI_READONLY := BUILD_NUMBER_FILE
+$(KATI_obsolete_var BUILD_NUMBER,See https://android.googlesource.com/platform/build/+/master/Changes.md#BUILD_NUMBER)
 
 ifeq ($(HOST_OS),darwin)
 DATE_FROM_FILE := date -r $(BUILD_DATETIME_FROM_FILE)
 else
 DATE_FROM_FILE := date -d @$(BUILD_DATETIME_FROM_FILE)
 endif
+.KATI_READONLY := DATE_FROM_FILE
 
 # Pick a reasonable string to use to identify files.
 ifeq ($(strip $(HAS_BUILD_NUMBER)),false)
@@ -81,6 +84,7 @@
 else
   FILE_NAME_TAG := $(file <$(BUILD_NUMBER_FILE))
 endif
+.KATI_READONLY := FILE_NAME_TAG
 
 # Make an empty directory, which can be used to make empty jars
 EMPTY_DIRECTORY := $(OUT_DIR)/empty
@@ -148,6 +152,15 @@
 
 #
 # -----------------------------------------------------------------
+# Validate ADDITIONAL_PRODUCT_PROPERTIES.
+ifneq ($(ADDITIONAL_PRODUCT_PROPERTIES),)
+$(error ADDITIONAL_PRODUCT_PROPERTIES must not be set before here: $(ADDITIONAL_PRODUCT_PROPERTIES))
+endif
+
+ADDITIONAL_PRODUCT_PROPERTIES :=
+
+#
+# -----------------------------------------------------------------
 # Add the product-defined properties to the build properties.
 ifdef PRODUCT_SHIPPING_API_LEVEL
 ADDITIONAL_BUILD_PROPERTIES += \
@@ -208,13 +221,11 @@
 # Enable dynamic linker and hidden API developer warnings for
 # userdebug, eng and non-REL builds
 ifneq ($(TARGET_BUILD_VARIANT),user)
-  ADDITIONAL_BUILD_PROPERTIES += ro.bionic.ld.warning=1 \
-                                 ro.art.hiddenapi.warning=1
+  ADDITIONAL_BUILD_PROPERTIES += ro.bionic.ld.warning=1
 else
 # Enable it for user builds as long as they are not final.
 ifneq ($(PLATFORM_VERSION_CODENAME),REL)
-  ADDITIONAL_BUILD_PROPERTIES += ro.bionic.ld.warning=1 \
-                                 ro.art.hiddenapi.warning=1
+  ADDITIONAL_BUILD_PROPERTIES += ro.bionic.ld.warning=1
 endif
 endif
 
@@ -233,6 +244,14 @@
 ADDITIONAL_DEFAULT_PROPERTIES += ro.actionable_compatible_property.enabled=${PRODUCT_COMPATIBLE_PROPERTY}
 endif
 
+ifeq ($(PRODUCT_USE_DYNAMIC_PARTITIONS),true)
+ADDITIONAL_PRODUCT_PROPERTIES += ro.boot.dynamic_partitions=true
+endif
+
+ifeq ($(PRODUCT_RETROFIT_DYNAMIC_PARTITIONS),true)
+ADDITIONAL_PRODUCT_PROPERTIES += ro.boot.dynamic_partitions_retrofit=true
+endif
+
 # -----------------------------------------------------------------
 ###
 ### In this section we set up the things that are different
@@ -304,8 +323,6 @@
   ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=1
   # Enable Dalvik lock contention logging.
   ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.lockprof.threshold=500
-  # Include the debugging/testing OTA keys in this build.
-  INCLUDE_TEST_OTA_KEYS := true
 else # !enable_target_debugging
   # Target is less debuggable and adbd is off by default
   ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=0
@@ -327,6 +344,15 @@
 endif
 endif
 
+## asan ##
+
+# Install some additional tools on ASAN builds IFF we are also installing debug tools
+ifneq ($(filter address,$(SANITIZE_TARGET)),)
+ifneq (,$(filter debug,$(tags_to_install)))
+  tags_to_install += asan
+endif
+endif
+
 ## sdk ##
 
 ifdef is_sdk_build
@@ -354,10 +380,6 @@
 
 ADDITIONAL_BUILD_PROPERTIES += net.bt.name=Android
 
-# Sets the location that the runtime dumps stack traces to when signalled
-# with SIGQUIT. Stack trace dumping is turned on for all android builds.
-ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.stack-trace-dir=/data/anr
-
 # ------------------------------------------------------------
 # Define a function that, given a list of module tags, returns
 # non-empty if that module should be installed in /system.
@@ -388,8 +410,9 @@
 # Typical build; include any Android.mk files we can find.
 #
 
-FULL_BUILD := true
-
+# Before we go and include all of the module makefiles, strip values for easier
+# processing.
+$(call strip-product-vars)
 # Before we go and include all of the module makefiles, mark the PRODUCT_*
 # and ADDITIONAL*PROPERTIES values readonly so that they won't be modified.
 $(call readonly-product-vars)
@@ -397,11 +420,29 @@
 .KATI_READONLY := ADDITIONAL_DEFAULT_PROPERTIES
 ADDITIONAL_BUILD_PROPERTIES := $(strip $(ADDITIONAL_BUILD_PROPERTIES))
 .KATI_READONLY := ADDITIONAL_BUILD_PROPERTIES
+ADDITIONAL_PRODUCT_PROPERTIES := $(strip $(ADDITIONAL_PRODUCT_PROPERTIES))
+.KATI_READONLY := ADDITIONAL_PRODUCT_PROPERTIES
 
 ifneq ($(PRODUCT_ENFORCE_RRO_TARGETS),)
 ENFORCE_RRO_SOURCES :=
 endif
 
+# Color-coded warnings including current module info
+# $(1): message to print
+define pretty-warning
+$(shell $(call echo-warning,$(LOCAL_MODULE_MAKEFILE),$(LOCAL_MODULE): $(1)))
+endef
+
+# Color-coded errors including current module info
+# $(1): message to print
+define pretty-error
+$(shell $(call echo-error,$(LOCAL_MODULE_MAKEFILE),$(LOCAL_MODULE): $(1)))
+$(error done)
+endef
+
+subdir_makefiles_inc := .
+FULL_BUILD :=
+
 ifneq ($(ONE_SHOT_MAKEFILE),)
 # We've probably been invoked by the "mm" shell function
 # with a subdirectory's makefile.
@@ -412,11 +453,6 @@
 # so that the modules will be installed in the same place they
 # would have been with a normal make.
 CUSTOM_MODULES := $(sort $(call get-tagged-modules,$(ALL_MODULE_TAGS)))
-FULL_BUILD :=
-# Stub out the notice targets, which probably aren't defined
-# when using ONE_SHOT_MAKEFILE.
-NOTICE-HOST-%: ;
-NOTICE-TARGET-%: ;
 
 # A helper goal printing out install paths
 define register_module_install_path
@@ -445,12 +481,13 @@
 else # ONE_SHOT_MAKEFILE
 
 ifneq ($(dont_bother),true)
+FULL_BUILD := true
 #
 # Include all of the makefiles in the system
 #
 
 subdir_makefiles := $(SOONG_ANDROID_MK) $(file <$(OUT_DIR)/.module_paths/Android.mk.list)
-subdir_makefiles_total := $(words $(subdir_makefiles))
+subdir_makefiles_total := $(words int $(subdir_makefiles) post finish)
 .KATI_READONLY := subdir_makefiles_total
 
 $(foreach mk,$(subdir_makefiles),$(info [$(call inc_and_print,subdir_makefiles_inc)/$(subdir_makefiles_total)] including $(mk) ...)$(eval include $(mk)))
@@ -466,11 +503,29 @@
 
 endif # ONE_SHOT_MAKEFILE
 
+ifndef subdir_makefiles_total
+subdir_makefiles_total := $(words init post finish)
+endif
+
+$(info [$(call inc_and_print,subdir_makefiles_inc)/$(subdir_makefiles_total)] finishing build rules ...)
+
 # -------------------------------------------------------------------
 # All module makefiles have been included at this point.
 # -------------------------------------------------------------------
 
 # -------------------------------------------------------------------
+# Use basic warning/error messages now that LOCAL_MODULE_MAKEFILE
+# and LOCAL_MODULE aren't useful anymore.
+# -------------------------------------------------------------------
+define pretty-warning
+$(warning $(1))
+endef
+
+define pretty-error
+$(error $(1))
+endef
+
+# -------------------------------------------------------------------
 # Enforce to generate all RRO packages for modules having resource
 # overlays.
 # -------------------------------------------------------------------
@@ -678,11 +733,44 @@
   $(eval r := $(filter $($(root))/%,$(call module-installed-files,\
     $(deps))))\
   $(if $(filter $(1),HOST_),\
+    $(eval ALL_MODULES.$(mod).HOST_SHARED_LIBRARY_FILES := $$(ALL_MODULES.$(mod).HOST_SHARED_LIBRARY_FILES) $(word 2,$(p)) $(r))\
+    $(eval ALL_MODULES.$(mod).HOST_SHARED_LIBRARIES := $$(ALL_MODULES.$(mod).HOST_SHARED_LIBRARIES) $(deps))\
     $(eval $(call add-required-host-so-deps,$(word 2,$(p)),$(r))),\
     $(eval $(call add-required-deps,$(word 2,$(p)),$(r))))\
   $(eval ALL_MODULES.$(mod).REQUIRED += $(deps)))
 endef
 
+# Recursively resolve host shared library dependency for a given module.
+# $(1): module name
+# Returns all dependencies of shared library.
+define get-all-shared-libs-deps
+$(if $(_all_deps_for_$(1)_set_),$(_all_deps_for_$(1)_),\
+  $(eval _all_deps_for_$(1)_ :=) \
+  $(foreach dep,$(ALL_MODULES.$(1).HOST_SHARED_LIBRARIES),\
+    $(foreach m,$(call get-all-shared-libs-deps,$(dep)),\
+      $(eval _all_deps_for_$(1)_ := $$(_all_deps_for_$(1)_) $(m))\
+      $(eval _all_deps_for_$(1)_ := $(sort $(_all_deps_for_$(1)_))))\
+    $(eval _all_deps_for_$(1)_ := $$(_all_deps_for_$(1)_) $(dep))\
+    $(eval _all_deps_for_$(1)_ := $(sort $(_all_deps_for_$(1)_) $(dep)))\
+    $(eval _all_deps_for_$(1)_set_ := true))\
+$(_all_deps_for_$(1)_))
+endef
+
+# Scan all modules in general-tests and device-tests suite and flatten the
+# shared library dependencies.
+define update-host-shared-libs-deps-for-suites
+$(foreach suite,general-tests device-tests,\
+  $(foreach m,$(COMPATIBILITY.$(suite).MODULES),\
+    $(eval my_deps := $(call get-all-shared-libs-deps,$(m)))\
+    $(foreach dep,$(my_deps),\
+      $(foreach f,$(ALL_MODULES.$(dep).HOST_SHARED_LIBRARY_FILES),\
+        $(eval target := $(HOST_OUT_TESTCASES)/$(lastword $(subst /, ,$(dir $(f))))/$(notdir $(f)))\
+        $(eval COMPATIBILITY.$(suite).HOST_SHARED_LIBRARY.FILES := \
+          $$(COMPATIBILITY.$(suite).HOST_SHARED_LIBRARY.FILES) $(f):$(target))\
+        $(eval COMPATIBILITY.$(suite).HOST_SHARED_LIBRARY.FILES := \
+          $(sort $(COMPATIBILITY.$(suite).HOST_SHARED_LIBRARY.FILES)))))))
+endef
+
 $(call resolve-shared-libs-depes,TARGET_)
 ifdef TARGET_2ND_ARCH
 $(call resolve-shared-libs-depes,TARGET_,true)
@@ -691,6 +779,9 @@
 ifdef HOST_2ND_ARCH
 $(call resolve-shared-libs-depes,HOST_,true)
 endif
+# Update host side shared library dependencies for tests in suite device-tests and general-tests.
+# This should be called after calling resolve-shared-libs-depes for HOST_2ND_ARCH.
+$(call update-host-shared-libs-deps-for-suites)
 ifdef HOST_CROSS_OS
 $(call resolve-shared-libs-depes,HOST_CROSS_,,true)
 endif
@@ -878,54 +969,165 @@
 # Of the modules defined by the component makefiles,
 # determine what we actually want to build.
 
+
+# Expand a list of modules to the modules that they override (if any)
+# $(1): The list of modules.
+define module-overrides
+$(foreach m,$(1),$(PACKAGES.$(m).OVERRIDES) $(EXECUTABLES.$(m).OVERRIDES) $(SHARED_LIBRARIES.$(m).OVERRIDES))
+endef
+
 ###########################################################
 ## Expand a module name list with REQUIRED modules
 ###########################################################
 # $(1): The variable name that holds the initial module name list.
 #       the variable will be modified to hold the expanded results.
 # $(2): The initial module name list.
+# $(3): The list of overridden modules.
 # Returns empty string (maybe with some whitespaces).
 define expand-required-modules
-$(eval _erm_new_modules := $(sort $(filter-out $($(1)),\
-  $(foreach m,$(2),$(ALL_MODULES.$(m).REQUIRED)))))\
-$(if $(_erm_new_modules),$(eval $(1) += $(_erm_new_modules))\
-  $(call expand-required-modules,$(1),$(_erm_new_modules)))
+$(eval _erm_req := $(foreach m,$(2),$(ALL_MODULES.$(m).REQUIRED))) \
+$(eval _erm_new_modules := $(sort $(filter-out $($(1)),$(_erm_req)))) \
+$(eval _erm_new_overrides := $(call module-overrides,$(_erm_new_modules))) \
+$(eval _erm_all_overrides := $(3) $(_erm_new_overrides)) \
+$(eval _erm_new_modules := $(filter-out $(_erm_all_overrides), $(_erm_new_modules))) \
+$(eval $(1) := $(filter-out $(_erm_new_overrides),$($(1)))) \
+$(eval $(1) += $(_erm_new_modules)) \
+$(if $(_erm_new_modules),\
+  $(call expand-required-modules,$(1),$(_erm_new_modules),$(_erm_all_overrides)))
 endef
 
-ifdef FULL_BUILD
-  # The base list of modules to build for this product is specified
-  # by the appropriate product definition file, which was included
-  # by product_config.mk.
-  product_MODULES := $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES)
-ifdef BOARD_VNDK_VERSION
-  product_MODULES += vndk_package
+# Transforms paths relative to PRODUCT_OUT to absolute paths.
+# $(1): list of relative paths
+# $(2): optional suffix to append to paths
+define resolve-product-relative-paths
+  $(subst $(_vendor_path_placeholder),$(TARGET_COPY_OUT_VENDOR),\
+    $(subst $(_product_path_placeholder),$(TARGET_COPY_OUT_PRODUCT),\
+      $(subst $(_product_services_path_placeholder),$(TARGET_COPY_OUT_PRODUCT_SERVICES),\
+        $(subst $(_odm_path_placeholder),$(TARGET_COPY_OUT_ODM),\
+          $(foreach p,$(1),$(call append-path,$(PRODUCT_OUT),$(p)$(2)))))))
+endef
+
+# Lists most of the files a particular product installs, including:
+# - PRODUCT_PACKAGES, and their LOCAL_REQUIRED_MODULES
+# - PRODUCT_COPY_FILES
+# The base list of modules to build for this product is specified
+# by the appropriate product definition file, which was included
+# by product_config.mk.
+# Name resolution for PRODUCT_PACKAGES:
+#   foo:32 resolves to foo_32;
+#   foo:64 resolves to foo;
+#   foo resolves to both foo and foo_32 (if foo_32 is defined).
+#
+# Name resolution for LOCAL_REQUIRED_MODULES:
+#   If a module is built for 2nd arch, its required module resolves to
+#   32-bit variant, if it exits. See the select-bitness-of-required-modules definition.
+# $(1): product makefile
+define product-installed-files
+  $(eval _mk := $(strip $(1))) \
+  $(eval _pif_modules := \
+    $(PRODUCTS.$(_mk).PRODUCT_PACKAGES) \
+    $(if $(filter eng,$(tags_to_install)),$(PRODUCTS.$(_mk).PRODUCT_PACKAGES_ENG)) \
+    $(if $(filter debug,$(tags_to_install)),$(PRODUCTS.$(_mk).PRODUCT_PACKAGES_DEBUG)) \
+    $(if $(filter tests,$(tags_to_install)),$(PRODUCTS.$(_mk).PRODUCT_PACKAGES_TESTS)) \
+    $(if $(filter asan,$(tags_to_install)),$(PRODUCTS.$(_mk).PRODUCT_PACKAGES_DEBUG_ASAN)) \
+    $(if $(BOARD_VNDK_VERSION),vndk_package) \
+  ) \
+  $(eval ### Filter out the overridden packages and executables before doing expansion) \
+  $(eval _pif_overrides := $(call module-overrides,$(_pif_modules))) \
+  $(eval _pif_modules := $(filter-out $(_pif_overrides), $(_pif_modules))) \
+  $(eval ### Resolve the :32 :64 module name) \
+  $(eval _pif_modules_32 := $(patsubst %:32,%,$(filter %:32, $(_pif_modules)))) \
+  $(eval _pif_modules_64 := $(patsubst %:64,%,$(filter %:64, $(_pif_modules)))) \
+  $(eval _pif_modules_rest := $(filter-out %:32 %:64,$(_pif_modules))) \
+  $(eval ### Note for 32-bit product, 32 and 64 will be added as their original module names.) \
+  $(eval _pif_modules := $(call get-32-bit-modules-if-we-can, $(_pif_modules_32))) \
+  $(eval _pif_modules += $(_pif_modules_64)) \
+  $(eval ### For the rest we add both) \
+  $(eval _pif_modules += $(call get-32-bit-modules, $(_pif_modules_rest))) \
+  $(eval _pif_modules += $(_pif_modules_rest)) \
+  $(call expand-required-modules,_pif_modules,$(_pif_modules),$(_pif_overrides)) \
+  $(call module-installed-files, $(_pif_modules)) \
+  $(call resolve-product-relative-paths,\
+    $(foreach cf,$(PRODUCTS.$(_mk).PRODUCT_COPY_FILES),$(call word-colon,2,$(cf))))
+endef
+
+# Fails the build if the given list is non-empty, and prints it entries (stripping PRODUCT_OUT).
+# $(1): list of files to print
+# $(2): heading to print on failure
+define maybe-print-list-and-error
+$(if $(strip $(1)), \
+  $(warning $(2)) \
+  $(info Offending entries:) \
+  $(foreach e,$(sort $(1)),$(info    $(patsubst $(PRODUCT_OUT)/%,%,$(e)))) \
+  $(error Build failed) \
+)
+endef
+
+ifeq (true|,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_ENFORCE_PACKAGES_EXIST)|$(filter true,$(ALLOW_MISSING_DEPENDENCIES)))
+  _whitelist := $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_ENFORCE_PACKAGES_EXIST_WHITELIST)
+  _modules := $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES)
+  # Sanity check all modules in PRODUCT_PACKAGES exist. We check for the
+  # existence if either <module> or the <module>_32 variant.
+  _nonexistant_modules := $(filter-out $(ALL_MODULES),$(_modules))
+  _nonexistant_modules := $(foreach m,$(_nonexistant_modules),\
+    $(if $(call get-32-bit-modules,$(m)),,$(m)))
+  $(call maybe-print-list-and-error,$(filter-out $(_whitelist),$(_nonexistant_modules)),\
+    $(INTERNAL_PRODUCT) includes non-existant modules in PRODUCT_PACKAGES)
+  $(call maybe-print-list-and-error,$(filter-out $(_nonexistant_modules),$(_whitelist)),\
+    $(INTERNAL_PRODUCT) includes redundant whitelist entries for nonexistant PRODUCT_PACKAGES)
 endif
-  # Filter out the overridden packages before doing expansion
-  product_MODULES := $(filter-out $(foreach p, $(product_MODULES), \
-      $(PACKAGES.$(p).OVERRIDES)), $(product_MODULES))
-  # Filter out executables as well
-  product_MODULES := $(filter-out $(foreach m, $(product_MODULES), \
-      $(EXECUTABLES.$(m).OVERRIDES)), $(product_MODULES))
 
-  # Resolve the :32 :64 module name
-  modules_32 := $(patsubst %:32,%,$(filter %:32, $(product_MODULES)))
-  modules_64 := $(patsubst %:64,%,$(filter %:64, $(product_MODULES)))
-  modules_rest := $(filter-out %:32 %:64,$(product_MODULES))
-  # Note for 32-bit product, $(modules_32) and $(modules_64) will be
-  # added as their original module names.
-  product_MODULES := $(call get-32-bit-modules-if-we-can, $(modules_32))
-  product_MODULES += $(modules_64)
-  # For the rest we add both
-  product_MODULES += $(call get-32-bit-modules, $(modules_rest))
-  product_MODULES += $(modules_rest)
+ifdef FULL_BUILD
+  product_FILES := $(call product-installed-files, $(INTERNAL_PRODUCT))
+  # WARNING: The product_MODULES variable is depended on by external files.
+  product_MODULES := $(_pif_modules)
 
-  $(call expand-required-modules,product_MODULES,$(product_MODULES))
-
-  product_FILES := $(call module-installed-files, $(product_MODULES))
-  ifeq (0,1)
-    $(info product_FILES for $(TARGET_DEVICE) ($(INTERNAL_PRODUCT)):)
-    $(foreach p,$(product_FILES),$(info :   $(p)))
-    $(error done)
+  # Verify the artifact path requirements made by included products.
+  is_asan := $(if $(filter address,$(SANITIZE_TARGET)),true)
+  ifneq (true,$(or $(is_asan),$(DISABLE_ARTIFACT_PATH_REQUIREMENTS)))
+  # Fakes don't get installed, and host files are irrelevant.
+  static_whitelist_patterns := $(TARGET_OUT_FAKE)/% $(HOST_OUT)/%
+  # RROs become REQUIRED by the source module, but are always placed on the vendor partition.
+  static_whitelist_patterns += %__auto_generated_rro.apk
+  ifeq (true,$(BOARD_USES_SYSTEM_OTHER_ODEX))
+    # Allow system_other odex space optimization.
+    static_whitelist_patterns += \
+      $(TARGET_OUT_SYSTEM_OTHER)/%.odex \
+      $(TARGET_OUT_SYSTEM_OTHER)/%.vdex \
+      $(TARGET_OUT_SYSTEM_OTHER)/%.art
+  endif
+  all_offending_files :=
+  $(foreach makefile,$(ARTIFACT_PATH_REQUIREMENT_PRODUCTS),\
+    $(eval requirements := $(PRODUCTS.$(makefile).ARTIFACT_PATH_REQUIREMENTS)) \
+    $(eval ### Verify that the product only produces files inside its path requirements.) \
+    $(eval whitelist := $(PRODUCTS.$(makefile).ARTIFACT_PATH_WHITELIST)) \
+    $(eval path_patterns := $(call resolve-product-relative-paths,$(requirements),%)) \
+    $(eval whitelist_patterns := $(call resolve-product-relative-paths,$(whitelist))) \
+    $(eval files := $(call product-installed-files, $(makefile))) \
+    $(eval offending_files := $(filter-out $(path_patterns) $(whitelist_patterns) $(static_whitelist_patterns),$(files))) \
+    $(call maybe-print-list-and-error,$(offending_files),$(makefile) produces files outside its artifact path requirement.) \
+    $(eval unused_whitelist := $(filter-out $(files),$(whitelist_patterns))) \
+    $(call maybe-print-list-and-error,$(unused_whitelist),$(makefile) includes redundant whitelist entries in its artifact path requirement.) \
+    $(eval ### Optionally verify that nothing else produces files inside this artifact path requirement.) \
+    $(eval extra_files := $(filter-out $(files) $(HOST_OUT)/%,$(product_FILES))) \
+    $(eval files_in_requirement := $(filter $(path_patterns),$(extra_files))) \
+    $(eval all_offending_files += $(files_in_requirement)) \
+    $(eval whitelist := $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_ARTIFACT_PATH_REQUIREMENT_WHITELIST)) \
+    $(eval whitelist_patterns := $(call resolve-product-relative-paths,$(whitelist))) \
+    $(eval offending_files := $(filter-out $(whitelist_patterns),$(files_in_requirement))) \
+    $(eval enforcement := $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_ENFORCE_ARTIFACT_PATH_REQUIREMENTS)) \
+    $(if $(enforcement),\
+      $(call maybe-print-list-and-error,$(offending_files),\
+        $(INTERNAL_PRODUCT) produces files inside $(makefile)s artifact path requirement. \
+        $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_ARTIFACT_PATH_REQUIREMENT_HINT)) \
+      $(eval unused_whitelist := $(if $(filter true strict,$(enforcement)),\
+        $(foreach p,$(whitelist_patterns),$(if $(filter $(p),$(extra_files)),,$(p))))) \
+      $(call maybe-print-list-and-error,$(unused_whitelist),$(INTERNAL_PRODUCT) includes redundant artifact path requirement whitelist entries.) \
+    ) \
+  )
+$(PRODUCT_OUT)/offending_artifacts.txt:
+	rm -f $@
+	$(foreach f,$(sort $(all_offending_files)),echo $(f) >> $@;)
   endif
 else
   # We're not doing a full build, and are probably only including
@@ -935,40 +1137,15 @@
   product_FILES :=
 endif
 
-eng_MODULES := $(sort \
-        $(call get-tagged-modules,eng) \
-        $(call module-installed-files, $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES_ENG)) \
-    )
-debug_MODULES := $(sort \
-        $(call get-tagged-modules,debug) \
-        $(call module-installed-files, $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES_DEBUG)) \
-    )
-tests_MODULES := $(sort \
-        $(call get-tagged-modules,tests) \
-        $(call module-installed-files, $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES_TESTS)) \
-    )
-
 # TODO: Remove the 3 places in the tree that use ALL_DEFAULT_INSTALLED_MODULES
 # and get rid of it from this list.
 modules_to_install := $(sort \
     $(ALL_DEFAULT_INSTALLED_MODULES) \
     $(product_FILES) \
-    $(foreach tag,$(tags_to_install),$($(tag)_MODULES)) \
+    $(call get-tagged-modules,$(tags_to_install)) \
     $(CUSTOM_MODULES) \
   )
 
-# Some packages may override others using LOCAL_OVERRIDES_PACKAGES.
-# Filter out (do not install) any overridden packages.
-overridden_packages := $(call get-package-overrides,$(modules_to_install))
-ifdef overridden_packages
-#  old_modules_to_install := $(modules_to_install)
-  modules_to_install := \
-      $(filter-out $(foreach p,$(overridden_packages),$(p) %/$(p).apk %/$(p).odex %/$(p).vdex), \
-          $(modules_to_install))
-endif
-#$(error filtered out
-#           $(filter-out $(modules_to_install),$(old_modules_to_install)))
-
 # Don't include any GNU General Public License shared objects or static
 # libraries in SDK images.  GPL executables (not static/dynamic libraries)
 # are okay if they don't link against any closed source libraries (directly
@@ -1031,6 +1208,9 @@
 modules_to_check += $(foreach m,$(ALL_MODULES),$(ALL_MODULES.$(m).BUILT))
 endif
 
+# Build docs as part of checkbuild to catch more breakages.
+module_to_check += $(ALL_DOCS)
+
 # for easier debugging
 modules_to_check := $(sort $(modules_to_check))
 #$(error modules_to_check $(modules_to_check))
@@ -1092,9 +1272,21 @@
 .PHONY: productimage
 productimage: $(INSTALLED_PRODUCTIMAGE_TARGET)
 
+.PHONY: productservicesimage
+productservicesimage: $(INSTALLED_PRODUCT_SERVICESIMAGE_TARGET)
+
+.PHONY: odmimage
+odmimage: $(INSTALLED_ODMIMAGE_TARGET)
+
 .PHONY: systemotherimage
 systemotherimage: $(INSTALLED_SYSTEMOTHERIMAGE_TARGET)
 
+.PHONY: superimage
+superimage: $(INSTALLED_SUPERIMAGE_TARGET)
+
+.PHONY: superimage_empty
+superimage_empty: $(INSTALLED_SUPERIMAGE_EMPTY_TARGET)
+
 .PHONY: bootimage
 bootimage: $(INSTALLED_BOOTIMAGE_TARGET)
 
@@ -1107,25 +1299,43 @@
 # Build files and then package it into the rom formats
 .PHONY: droidcore
 droidcore: files \
-	systemimage \
-	$(INSTALLED_BOOTIMAGE_TARGET) \
-	$(INSTALLED_RECOVERYIMAGE_TARGET) \
-	$(INSTALLED_VBMETAIMAGE_TARGET) \
-	$(INSTALLED_USERDATAIMAGE_TARGET) \
-	$(INSTALLED_CACHEIMAGE_TARGET) \
-	$(INSTALLED_BPTIMAGE_TARGET) \
-	$(INSTALLED_VENDORIMAGE_TARGET) \
-	$(INSTALLED_PRODUCTIMAGE_TARGET) \
-	$(INSTALLED_SYSTEMOTHERIMAGE_TARGET) \
-	$(INSTALLED_FILES_FILE) \
-	$(INSTALLED_FILES_FILE_VENDOR) \
-	$(INSTALLED_FILES_FILE_PRODUCT) \
-	$(INSTALLED_FILES_FILE_SYSTEMOTHER) \
-	soong_docs
+    systemimage \
+    $(INSTALLED_RAMDISK_TARGET) \
+    $(INSTALLED_BOOTIMAGE_TARGET) \
+    $(INSTALLED_RECOVERYIMAGE_TARGET) \
+    $(INSTALLED_VBMETAIMAGE_TARGET) \
+    $(INSTALLED_USERDATAIMAGE_TARGET) \
+    $(INSTALLED_CACHEIMAGE_TARGET) \
+    $(INSTALLED_BPTIMAGE_TARGET) \
+    $(INSTALLED_VENDORIMAGE_TARGET) \
+    $(INSTALLED_ODMIMAGE_TARGET) \
+    $(INSTALLED_SUPERIMAGE_EMPTY_TARGET) \
+    $(INSTALLED_PRODUCTIMAGE_TARGET) \
+    $(INSTALLED_SYSTEMOTHERIMAGE_TARGET) \
+    $(INSTALLED_FILES_FILE) \
+    $(INSTALLED_FILES_JSON) \
+    $(INSTALLED_FILES_FILE_VENDOR) \
+    $(INSTALLED_FILES_JSON_VENDOR) \
+    $(INSTALLED_FILES_FILE_ODM) \
+    $(INSTALLED_FILES_JSON_ODM) \
+    $(INSTALLED_FILES_FILE_PRODUCT) \
+    $(INSTALLED_FILES_JSON_PRODUCT) \
+    $(INSTALLED_FILES_FILE_PRODUCT_SERVICES) \
+    $(INSTALLED_FILES_JSON_PRODUCT_SERVICES) \
+    $(INSTALLED_FILES_FILE_SYSTEMOTHER) \
+    $(INSTALLED_FILES_JSON_SYSTEMOTHER) \
+    $(INSTALLED_FILES_FILE_RAMDISK) \
+    $(INSTALLED_FILES_JSON_RAMDISK) \
+    $(INSTALLED_FILES_FILE_ROOT) \
+    $(INSTALLED_FILES_JSON_ROOT) \
+    $(INSTALLED_FILES_FILE_RECOVERY) \
+    $(INSTALLED_FILES_JSON_RECOVERY) \
+    soong_docs
 
 # dist_files only for putting your library into the dist directory with a full build.
 .PHONY: dist_files
 
+.PHONY: apps_only
 ifneq ($(TARGET_BUILD_APPS),)
   # If this build is just for apps, only build apps and not the full system by default.
 
@@ -1140,6 +1350,12 @@
   # Dist the installed files if they exist.
   apps_only_installed_files := $(foreach m,$(unbundled_build_modules),$(ALL_MODULES.$(m).INSTALLED))
   $(call dist-for-goals,apps_only, $(apps_only_installed_files))
+
+  # Dist the bundle files if they exist.
+  apps_only_bundle_files := $(foreach m,$(unbundled_build_modules),\
+    $(if $(ALL_MODULES.$(m).BUNDLE),$(ALL_MODULES.$(m).BUNDLE):$(m)-base.zip))
+  $(call dist-for-goals,apps_only, $(apps_only_bundle_files))
+
   # For uninstallable modules such as static Java library, we have to dist the built file,
   # as <module_name>.<suffix>
   apps_only_dist_built_files := $(foreach m,$(unbundled_build_modules),$(if $(ALL_MODULES.$(m).INSTALLED),,\
@@ -1162,7 +1378,6 @@
   $(COVERAGE_ZIP) : $(apps_only_installed_files)
   $(call dist-for-goals,apps_only, $(COVERAGE_ZIP))
 
-.PHONY: apps_only
 apps_only: $(unbundled_build_modules)
 
 droid_targets: apps_only
@@ -1180,13 +1395,25 @@
   $(call dist-for-goals, droidcore, \
     $(INTERNAL_UPDATE_PACKAGE_TARGET) \
     $(INTERNAL_OTA_PACKAGE_TARGET) \
+    $(INTERNAL_OTA_RETROFIT_DYNAMIC_PARTITIONS_PACKAGE_TARGET) \
     $(BUILT_OTATOOLS_PACKAGE) \
     $(SYMBOLS_ZIP) \
     $(COVERAGE_ZIP) \
+    $(APPCOMPAT_ZIP) \
     $(INSTALLED_FILES_FILE) \
+    $(INSTALLED_FILES_JSON) \
     $(INSTALLED_FILES_FILE_VENDOR) \
+    $(INSTALLED_FILES_JSON_VENDOR) \
+    $(INSTALLED_FILES_FILE_ODM) \
+    $(INSTALLED_FILES_JSON_ODM) \
     $(INSTALLED_FILES_FILE_PRODUCT) \
+    $(INSTALLED_FILES_JSON_PRODUCT) \
+    $(INSTALLED_FILES_FILE_PRODUCT_SERVICES) \
+    $(INSTALLED_FILES_JSON_PRODUCT_SERVICES) \
     $(INSTALLED_FILES_FILE_SYSTEMOTHER) \
+    $(INSTALLED_FILES_JSON_SYSTEMOTHER) \
+    $(INSTALLED_FILES_FILE_RECOVERY) \
+    $(INSTALLED_FILES_JSON_RECOVERY) \
     $(INSTALLED_BUILD_PROP_TARGET) \
     $(BUILT_TARGET_FILES_PACKAGE) \
     $(INSTALLED_ANDROID_INFO_TXT_TARGET) \
@@ -1207,9 +1434,31 @@
   endif
   endif
 
+  $(call dist-for-goals, droidcore, \
+    $(INSTALLED_FILES_FILE_ROOT) \
+    $(INSTALLED_FILES_JSON_ROOT) \
+  )
+
+  ifneq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true)
+    $(call dist-for-goals, droidcore, \
+      $(INSTALLED_FILES_FILE_RAMDISK) \
+      $(INSTALLED_FILES_JSON_RAMDISK) \
+    )
+  endif
+
   ifeq ($(EMMA_INSTRUMENT),true)
-    $(JACOCO_REPORT_CLASSES_ALL) : $(INSTALLED_SYSTEMIMAGE)
+    $(JACOCO_REPORT_CLASSES_ALL) : $(INSTALLED_SYSTEMIMAGE_TARGET)
     $(call dist-for-goals, dist_files, $(JACOCO_REPORT_CLASSES_ALL))
+
+    # Put XML formatted API files in the dist dir.
+    api_xmls := $(addprefix $(TARGET_OUT_COMMON_INTERMEDIATES)/,api.xml system-api.xml test-api.xml)
+    $(api_xmls): $(TARGET_OUT_COMMON_INTERMEDIATES)/%api.xml : frameworks/base/api/%current.txt $(APICHECK)
+	$(hide) echo "Converting API file to XML: $@"
+	$(hide) mkdir -p $(dir $@)
+	$(hide) $(APICHECK_COMMAND) -convert2xml $< $@
+
+    $(call dist-for-goals, dist_files, $(api_xmls))
+    api_xmls :=
   endif
 
 # Building a full system-- the default is to build droidcore
@@ -1220,20 +1469,22 @@
 .PHONY: docs
 docs: $(ALL_DOCS)
 
-.PHONY: sdk
+.PHONY: sdk win_sdk winsdk-tools sdk_addon
 ALL_SDK_TARGETS := $(INTERNAL_SDK_TARGET)
 sdk: $(ALL_SDK_TARGETS)
 $(call dist-for-goals,sdk win_sdk, \
     $(ALL_SDK_TARGETS) \
     $(SYMBOLS_ZIP) \
     $(COVERAGE_ZIP) \
+    $(APPCOMPAT_ZIP) \
     $(INSTALLED_BUILD_PROP_TARGET) \
 )
 
 # umbrella targets to assit engineers in verifying builds
 .PHONY: java native target host java-host java-target native-host native-target \
         java-host-tests java-target-tests native-host-tests native-target-tests \
-        java-tests native-tests host-tests target-tests tests java-dex
+        java-tests native-tests host-tests target-tests tests java-dex \
+        native-host-cross
 # some synonyms
 .PHONY: host-java target-java host-native target-native \
         target-java-tests target-native-tests
@@ -1277,6 +1528,17 @@
 	@echo "$(call module-names-for-tag-list,$(ALL_MODULE_TAGS))" | \
 	      tr -s ' ' '\n' | sort -u | $(COLUMN)
 
+.PHONY: dump-products
+dump-products:
+	$(dump-products)
+	@echo Successfully dumped products
+
+.PHONY: dump-files
+dump-files:
+	$(info product_FILES for $(TARGET_DEVICE) ($(INTERNAL_PRODUCT)):)
+	$(foreach p,$(sort $(product_FILES)),$(info :   $(p)))
+	@echo Successfully dumped product file list
+
 .PHONY: nothing
 nothing:
 	@echo Successfully read the makefiles.
@@ -1288,4 +1550,8 @@
 ndk: $(SOONG_OUT_DIR)/ndk.timestamp
 .PHONY: ndk
 
+$(call dist-write-file,$(KATI_PACKAGE_MK_DIR)/dist.mk)
+
+$(info [$(call inc_and_print,subdir_makefiles_inc)/$(subdir_makefiles_total)] writing build rules ...)
+
 endif # KATI
diff --git a/core/math.mk b/core/math.mk
deleted file mode 100644
index 44e03ce..0000000
--- a/core/math.mk
+++ /dev/null
@@ -1,152 +0,0 @@
-#
-# Copyright (C) 2017 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-###########################################################
-# Basic math functions for positive integers <= 100
-#
-# (SDK versions for example)
-###########################################################
-__MATH_NUMBERS :=  1  2  3  4  5  6  7  8  9 10 11 12 13 14 15 16 17 18 19 20 \
-                  21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 \
-                  41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 \
-                  61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 \
-                  81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
-
-# Returns true if $(1) is a positive integer <= 100, otherwise returns nothing.
-define math_is_number
-$(strip \
-  $(if $(1),,$(error Argument missing)) \
-  $(if $(word 2,$(1)),$(error Multiple words in a single argument: $(1))) \
-  $(if $(filter $(1),$(__MATH_NUMBERS)),true))
-endef
-
-#$(warning true == $(call math_is_number,2))
-#$(warning == $(call math_is_number,foo))
-#$(call math_is_number,1 2)
-#$(call math_is_number,no 2)
-
-define _math_check_valid
-$(if $(call math_is_number,$(1)),,$(error Only positive integers <= 100 are supported (not $(1))))
-endef
-
-# return a list containing integers ranging from [$(1),$(2)]
-define int_range_list
-$(call _math_check_valid,$(1))$(call _math_check_valid,$(2))$(wordlist $(1),$(2),$(__MATH_NUMBERS))
-endef
-
-#$(call _math_check_valid,0)
-#$(call _math_check_valid,1)
-#$(call _math_check_valid,100)
-#$(call _math_check_valid,101)
-#$(call _math_check_valid,)
-#$(call _math_check_valid,1 2)
-
-# Returns the greater of $1 or $2.
-# If $1 or $2 is not a positive integer <= 100, then an error is generated.
-define math_max
-$(strip $(call _math_check_valid,$(1)) $(call _math_check_valid,$(2)) \
-  $(lastword $(filter $(1) $(2),$(__MATH_NUMBERS))))
-endef
-
-#$(call math_max)
-#$(call math_max,1)
-#$(call math_max,1 2,3)
-#$(warning 1 == $(call math_max,1,1))
-#$(warning 42 == $(call math_max,5,42))
-#$(warning 42 == $(call math_max,42,5))
-
-define math_gt_or_eq
-$(if $(filter $(1),$(call math_max,$(1),$(2))),true)
-endef
-
-define math_lt
-$(if $(call math_gt_or_eq,$(1),$(2)),,true)
-endef
-
-#$(warning $(call math_gt_or_eq, 2, 1))
-#$(warning $(call math_gt_or_eq, 1, 1))
-#$(warning $(if $(call math_gt_or_eq, 1, 2),false,true))
-
-# $1 is the variable name to increment
-define inc_and_print
-$(strip $(eval $(1) := $($(1)) .)$(words $($(1))))
-endef
-
-# Returns the words in $2 that are numbers and are less than $1
-define numbers_less_than
-$(strip \
-  $(foreach n,$2, \
-    $(if $(call math_is_number,$(n)), \
-      $(if $(call math_lt,$(n),$(1)), \
-        $(n)))))
-endef
-
-_INT_LIMIT_WORDS := $(foreach a,x x,$(foreach b,x x x x x x x x x x x x x x x x,\
-  $(foreach c,x x x x x x x x x x x x x x x x,x x x x x x x x x x x x x x x x)))
-
-define _int_encode
-$(if $(filter $(words x $(_INT_LIMIT_WORDS)),$(words $(wordlist 1,$(1),x $(_INT_LIMIT_WORDS)))),\
-  $(call pretty-error,integer greater than $(words $(_INT_LIMIT_WORDS)) is not supported!),\
-    $(wordlist 1,$(1),$(_INT_LIMIT_WORDS)))
-endef
-
-# _int_max returns the maximum of the two arguments
-# input: two (x) lists; output: one (x) list
-# integer cannot be passed in directly. It has to be converted using _int_encode.
-define _int_max
-$(subst xx,x,$(join $(1),$(2)))
-endef
-
-# first argument is greater than second argument
-# output: non-empty if true
-# integer cannot be passed in directly. It has to be converted using _int_encode.
-define _int_greater-than
-$(filter-out $(words $(2)),$(words $(call _int_max,$(1),$(2))))
-endef
-
-# first argument equals to second argument
-# output: non-empty if true
-# integer cannot be passed in directly. It has to be converted using _int_encode.
-define _int_equal
-$(filter $(words $(1)),$(words $(2)))
-endef
-
-# first argument is greater than or equal to second argument
-# output: non-empty if true
-# integer cannot be passed in directly. It has to be converted using _int_encode.
-define _int_greater-or-equal
-$(call _int_greater-than,$(1),$(2))$(call _int_equal,$(1),$(2))
-endef
-
-define int_plus
-$(words $(call _int_encode,$(1)) $(call _int_encode,$(2)))
-endef
-
-define int_subtract
-$(if $(call _int_greater-or-equal,$(call _int_encode,$(1)),$(call _int_encode,$(2))),\
-  $(words $(filter-out xx,$(join $(call _int_encode,$(1)),$(call _int_encode,$(2))))),\
-    $(call pretty-error,$(1) subtract underflow $(2)))
-endef
-
-define int_multiply
-$(words $(foreach a,$(call _int_encode,$(1)),$(call _int_encode,$(2))))
-endef
-
-define int_divide
-$(if $(filter 0,$(2)),$(call pretty-error,division by zero is not allowed!),$(strip \
-  $(if $(call _int_greater-or-equal,$(call _int_encode,$(1)),$(call _int_encode,$(2))), \
-    $(call int_plus,$(call int_divide,$(call int_subtract,$(1),$(2)),$(2)),1),0)))
-endef
diff --git a/core/multi_prebuilt.mk b/core/multi_prebuilt.mk
index 77c57ab..c97d481 100644
--- a/core/multi_prebuilt.mk
+++ b/core/multi_prebuilt.mk
@@ -38,7 +38,6 @@
 # $(2): IS_HOST_MODULE
 # $(3): MODULE_CLASS
 # $(4): MODULE_TAGS
-# $(5): OVERRIDE_BUILT_MODULE_PATH
 # $(6): UNINSTALLABLE_MODULE
 # $(7): BUILT_MODULE_STEM
 # $(8): LOCAL_STRIP_MODULE
@@ -56,7 +55,6 @@
   $(eval LOCAL_IS_HOST_MODULE := $(2)) \
   $(eval LOCAL_MODULE_CLASS := $(3)) \
   $(eval LOCAL_MODULE_TAGS := $(4)) \
-  $(eval OVERRIDE_BUILT_MODULE_PATH := $(5)) \
   $(eval LOCAL_UNINSTALLABLE_MODULE := $(6)) \
   $(eval tw := $(subst :, ,$(strip $(t)))) \
   $(if $(word 3,$(tw)),$(error $(LOCAL_PATH): Bad prebuilt filename '$(t)')) \
@@ -98,7 +96,7 @@
     $(prebuilt_is_host), \
     SHARED_LIBRARIES, \
     $(prebuilt_module_tags), \
-    $($(if $(prebuilt_is_host),HOST,TARGET)_OUT_INTERMEDIATE_LIBRARIES), \
+    , \
     , \
     , \
     $(prebuilt_strip_module))
diff --git a/core/native_benchmark_test_config_template.xml b/core/native_benchmark_test_config_template.xml
new file mode 100644
index 0000000..18736bf
--- /dev/null
+++ b/core/native_benchmark_test_config_template.xml
@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2018 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<!-- This test config file is auto-generated. -->
+<configuration description="Runs {MODULE}.">
+    <option name="test-suite-tag" value="apct" />
+    <option name="test-suite-tag" value="apct-native-metric" />
+    <target_preparer class="com.android.tradefed.targetprep.PushFilePreparer">
+        <option name="cleanup" value="true" />
+        <option name="push" value="{MODULE}->/data/local/tmp/{MODULE}" />
+    </target_preparer>
+    <test class="com.android.tradefed.testtype.GoogleBenchmarkTest" >
+        <option name="native-benchmark-device-path" value="/data/local/tmp" />
+        <option name="benchmark-module-name" value="{MODULE}" />
+    </test>
+</configuration>
diff --git a/core/native_host_test_config_template.xml b/core/native_host_test_config_template.xml
new file mode 100644
index 0000000..c0fcd1a
--- /dev/null
+++ b/core/native_host_test_config_template.xml
@@ -0,0 +1,23 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2018 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<!-- This test config file is auto-generated. -->
+<configuration description="Runs {MODULE}.">
+    <option name="null-device" value="true" />
+    <test class="com.android.tradefed.testtype.HostGTest" >
+        <option name="module-name" value="{MODULE}" />
+    </test>
+</configuration>
+
diff --git a/core/native_test_config_template.xml b/core/native_test_config_template.xml
index a960529..a88d57c 100644
--- a/core/native_test_config_template.xml
+++ b/core/native_test_config_template.xml
@@ -15,6 +15,8 @@
 -->
 <!-- This test config file is auto-generated. -->
 <configuration description="Runs {MODULE}.">
+    <option name="test-suite-tag" value="apct" />
+    <option name="test-suite-tag" value="apct-native" />
     <target_preparer class="com.android.tradefed.targetprep.PushFilePreparer">
         <option name="cleanup" value="true" />
         <option name="push" value="{MODULE}->/data/local/tmp/{MODULE}" />
diff --git a/core/ninja_config.mk b/core/ninja_config.mk
index ca2dcee..684ab9f 100644
--- a/core/ninja_config.mk
+++ b/core/ninja_config.mk
@@ -7,7 +7,7 @@
 KATI_OUTPUT_PATTERNS := $(OUT_DIR)/build%.ninja $(OUT_DIR)/ninja%.sh
 
 # Modifier goals we don't need to pass to Ninja.
-NINJA_EXCLUDE_GOALS := all dist APP-% PRODUCT-%
+NINJA_EXCLUDE_GOALS := all APP-% PRODUCT-%
 
 # A list of goals which affect parsing of makefiles and we need to pass to Kati.
 PARSE_TIME_MAKE_GOALS := \
@@ -28,7 +28,6 @@
 	custom_images \
 	deps-license \
 	dicttool_aosp \
-	dist \
 	dump-products \
 	eng \
 	fusion \
diff --git a/core/notice_files.mk b/core/notice_files.mk
index 383d73c..e687ab2 100644
--- a/core/notice_files.mk
+++ b/core/notice_files.mk
@@ -14,6 +14,11 @@
   notice_file :=
 endif
 
+ifeq ($(LOCAL_MODULE_CLASS),FAKE)
+  # We ignore NOTICE files for modules of type FAKE.
+  notice_file :=
+endif
+
 # Soong generates stub libraries that don't need NOTICE files
 ifdef LOCAL_NO_NOTICE_FILE
   ifneq ($(LOCAL_MODULE_MAKEFILE),$(SOONG_ANDROID_MK))
@@ -35,6 +40,10 @@
 
 ifdef notice_file
 
+ifdef my_register_name
+ALL_MODULES.$(my_register_name).NOTICES := $(ALL_MODULES.$(my_register_name).NOTICES) $(notice_file)
+endif
+
 # This relies on the name of the directory in PRODUCT_OUT matching where
 # it's installed on the target - i.e. system, data, etc.  This does
 # not work for root and isn't exact, but it's probably good enough for
@@ -110,6 +119,6 @@
 # Define it even if the notice file doesn't exist so that other
 # modules can depend on it.
 notice_target := NOTICE-$(if \
-    $(LOCAL_IS_HOST_MODULE),HOST,TARGET)-$(LOCAL_MODULE_CLASS)-$(LOCAL_MODULE)
+    $(LOCAL_IS_HOST_MODULE),HOST$(if $(my_host_cross),_CROSS,),TARGET)-$(LOCAL_MODULE_CLASS)-$(LOCAL_MODULE)
 .PHONY: $(notice_target)
 $(notice_target): $(installed_notice_file)
diff --git a/core/pack_dyn_relocs_setup.mk b/core/pack_dyn_relocs_setup.mk
new file mode 100644
index 0000000..c5564b1
--- /dev/null
+++ b/core/pack_dyn_relocs_setup.mk
@@ -0,0 +1,34 @@
+#############################################################
+## Set up my_pack_module_relocations
+## Input variables:
+##   DISABLE_RELOCATION_PACKER,
+##   LOCAL_PACK_MODULE_RELOCATIONS*,
+##   *TARGET_PACK_MODULE_RELOCATIONS,
+##   LOCAL_MODULE_CLASS, HOST_OS
+##   LOCAL_IS_HOST_MODULE
+## Output variables:
+##   my_pack_module_relocations, if false skip relocation_packer
+#############################################################
+
+my_pack_module_relocations := false
+ifneq ($(DISABLE_RELOCATION_PACKER),true)
+  my_pack_module_relocations := $(firstword \
+    $(LOCAL_PACK_MODULE_RELOCATIONS_$($(my_prefix)$(LOCAL_2ND_ARCH_VAR_PREFIX)ARCH)) \
+    $(LOCAL_PACK_MODULE_RELOCATIONS))
+endif
+
+ifeq ($(my_pack_module_relocations),)
+  my_pack_module_relocations := $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_PACK_MODULE_RELOCATIONS)
+endif
+
+# Do not pack relocations for executables. Because packing results in
+# non-zero p_vaddr which causes kernel to load executables to lower
+# address (starting at 0x8000) http://b/20665974
+ifeq ($(filter SHARED_LIBRARIES,$(LOCAL_MODULE_CLASS)),)
+  my_pack_module_relocations := false
+endif
+
+ifdef LOCAL_IS_HOST_MODULE
+  # Do not pack relocations on host modules
+  my_pack_module_relocations := false
+endif
diff --git a/core/package.mk b/core/package.mk
index f3713fc..854e009 100644
--- a/core/package.mk
+++ b/core/package.mk
@@ -8,7 +8,9 @@
 include $(BUILD_SYSTEM)/multilib.mk
 
 ifeq ($(TARGET_TRANSLATE_2ND_ARCH),true)
-  ifneq ($(TARGET_SUPPORTS_64_BIT_APPS)|$(my_module_multilib),|64)
+  ifeq ($(TARGET_SUPPORTS_64_BIT_APPS),true)
+    my_module_multilib := first
+  else ifneq ($(my_module_multilib),64)
     my_module_multilib := first
   endif
 endif
diff --git a/core/package_internal.mk b/core/package_internal.mk
index 80d386d..9327587 100644
--- a/core/package_internal.mk
+++ b/core/package_internal.mk
@@ -87,6 +87,11 @@
   LOCAL_RESOURCE_DIR := $(foreach d,$(LOCAL_RESOURCE_DIR),$(call clean-path,$(d)))
 endif
 
+include $(BUILD_SYSTEM)/force_aapt2.mk
+
+# Process Support Library dependencies.
+include $(BUILD_SYSTEM)/support_libraries.mk
+
 package_resource_overlays := $(strip \
     $(wildcard $(foreach dir, $(PRODUCT_PACKAGE_OVERLAYS), \
       $(addprefix $(dir)/, $(LOCAL_RESOURCE_DIR)))) \
@@ -113,6 +118,8 @@
         enforce_rro_enabled :=
       else ifeq (true,$(LOCAL_PRODUCT_MODULE))
         enforce_rro_enabled :=
+      else ifeq (true,$(LOCAL_PRODUCT_SERVICES_MODULE))
+        enforce_rro_enabled :=
       endif
     else ifeq ($(filter $(TARGET_OUT)/%,$(LOCAL_MODULE_PATH)),)
       enforce_rro_enabled :=
@@ -153,13 +160,13 @@
 endif
 
 my_res_package :=
-ifdef LOCAL_USE_AAPT2
+ifeq ($(LOCAL_USE_AAPT2),true)
 # In aapt2 the last takes precedence.
 my_resource_dirs := $(call reverse-list,$(LOCAL_RESOURCE_DIR))
 my_res_dir :=
 my_overlay_res_dirs :=
 
-ifneq ($(LOCAL_STATIC_ANDROID_LIBRARIES),)
+ifneq ($(strip $(LOCAL_STATIC_ANDROID_LIBRARIES) $(LOCAL_STATIC_JAVA_AAR_LIBRARIES)),)
 # If we are using static android libraries, every source file becomes an overlay.
 # This is to emulate old AAPT behavior which simulated library support.
 my_res_dir :=
@@ -187,6 +194,11 @@
 my_res_package := $(intermediates)/package-res.apk
 LOCAL_INTERMEDIATE_TARGETS += $(my_res_package)
 
+ifeq ($(LOCAL_USE_AAPT2),true)
+  my_bundle_module := $(intermediates)/base.zip
+  LOCAL_INTERMEDIATE_TARGETS += $(my_bundle_module)
+endif
+
 # Always run aapt2, because we need to at least compile the AndroidManifest.xml.
 need_compile_res := true
 
@@ -314,9 +326,6 @@
 LOCAL_AAPT_FLAGS += --auto-add-overlay --extra-packages com.android.databinding.library
 endif  # LOCAL_DATA_BINDING
 
-# Process Support Library dependencies.
-include $(BUILD_SYSTEM)/support_libraries.mk
-
 # If the module is a compressed module, we don't pre-opt it because its final
 # installation location will be the data partition.
 ifdef LOCAL_COMPRESSED_MODULE
@@ -357,9 +366,9 @@
 ###############################
 ## AAPT/AAPT2
 
-ifdef LOCAL_USE_AAPT2
+ifeq ($(LOCAL_USE_AAPT2),true)
   my_compiled_res_base_dir := $(intermediates.COMMON)/flat-res
-  ifneq (,$(renderscript_target_api))
+  ifneq (,$(filter-out current,$(renderscript_target_api)))
     ifneq ($(call math_gt_or_eq,$(renderscript_target_api),21),true)
       my_generated_res_zips := $(rs_generated_res_zip)
     endif  # renderscript_target_api < 21
@@ -409,15 +418,14 @@
     resource_export_package := $(intermediates.COMMON)/package-export.apk
     $(R_file_stamp): $(resource_export_package)
 
-    # add-assets-to-package looks at PRODUCT_AAPT_CONFIG, but this target
+    # create-assets-package looks at PRODUCT_AAPT_CONFIG, but this target
     # can't know anything about PRODUCT.  Clear it out just for this target.
     $(resource_export_package): PRIVATE_PRODUCT_AAPT_CONFIG :=
     $(resource_export_package): PRIVATE_PRODUCT_AAPT_PREF_CONFIG :=
     $(resource_export_package): PRIVATE_RESOURCE_LIST := $(all_res_assets)
     $(resource_export_package): $(all_res_assets) $(full_android_manifest) $(rs_generated_res_zip) $(AAPT)
 	@echo "target Export Resources: $(PRIVATE_MODULE) ($@)"
-	$(create-empty-package)
-	$(add-assets-to-package)
+	$(call create-assets-package,$@)
   endif
 
 endif  # LOCAL_USE_AAPT2
@@ -489,7 +497,7 @@
 else ifneq ($(filter-out current system_current test_current,$(LOCAL_SDK_RES_VERSION))$(if $(TARGET_BUILD_APPS),$(filter current system_current test_current,$(LOCAL_SDK_RES_VERSION))),)
 # for released sdk versions, the platform resources were built into android.jar.
 framework_res_package_export := \
-    $(HISTORICAL_SDK_VERSIONS_ROOT)/$(LOCAL_SDK_RES_VERSION)/android.jar
+    $(call resolve-prebuilt-sdk-jar-path,$(LOCAL_SDK_RES_VERSION))
 else # LOCAL_SDK_RES_VERSION
 framework_res_package_export := \
     $(call intermediates-dir-for,APPS,framework-res,,COMMON)/package-export.apk
@@ -509,7 +517,7 @@
 $(LOCAL_INTERMEDIATE_TARGETS): \
     PRIVATE_AAPT_INCLUDES := $(all_library_res_package_exports)
 
-ifdef LOCAL_USE_AAPT2
+ifeq ($(LOCAL_USE_AAPT2),true)
 $(my_res_package) : $(all_library_res_package_export_deps)
 endif
 
@@ -588,12 +596,26 @@
 endif
 endif
 
-$(LOCAL_BUILT_MODULE): PRIVATE_DONT_DELETE_JAR_DIRS := $(LOCAL_DONT_DELETE_JAR_DIRS)
+# Run veridex on product, product_services and vendor modules.
+# We skip it for unbundled app builds where we cannot build veridex.
+module_run_appcompat :=
+ifeq (true,$(filter true, \
+   $(LOCAL_PRODUCT_MODULE) $(LOCAL_PRODUCT_SERVICES_MODULE) \
+   $(LOCAL_VENDOR_MODULE) $(LOCAL_PROPRIETARY_MODULE)))
+ifeq (,$(TARGET_BUILD_APPS)$(filter true,$(TARGET_BUILD_PDK)))  # ! unbundled app build
+  module_run_appcompat := true
+endif
+endif
+
+ifeq ($(module_run_appcompat),true)
+$(LOCAL_BUILT_MODULE) : $(appcompat-files)
+$(LOCAL_BUILT_MODULE): PRIVATE_INSTALLED_MODULE := $(LOCAL_INSTALLED_MODULE)
+endif
+
 $(LOCAL_BUILT_MODULE): PRIVATE_RESOURCE_INTERMEDIATES_DIR := $(intermediates.COMMON)/resources
-$(LOCAL_BUILT_MODULE): PRIVATE_FULL_CLASSES_JAR := $(full_classes_jar)
 $(LOCAL_BUILT_MODULE) : $(jni_shared_libraries)
-$(LOCAL_BUILT_MODULE) : $(JAR_ARGS)
-ifdef LOCAL_USE_AAPT2
+$(LOCAL_BUILT_MODULE) : $(JAR_ARGS) $(SOONG_ZIP) $(MERGE_ZIPS) $(ZIP2ZIP)
+ifeq ($(LOCAL_USE_AAPT2),true)
 $(LOCAL_BUILT_MODULE): PRIVATE_RES_PACKAGE := $(my_res_package)
 $(LOCAL_BUILT_MODULE) : $(my_res_package) $(AAPT2) | $(ACP)
 else
@@ -603,37 +625,52 @@
 ifdef LOCAL_COMPRESSED_MODULE
 $(LOCAL_BUILT_MODULE) : $(MINIGZIP)
 endif
+ifeq (true, $(LOCAL_UNCOMPRESS_DEX))
+$(LOCAL_BUILT_MODULE) : $(ZIP2ZIP)
+endif
+ifneq ($(BUILD_PLATFORM_ZIP),)
+$(LOCAL_BUILT_MODULE) : .KATI_IMPLICIT_OUTPUTS := $(dir $(LOCAL_BUILT_MODULE))package.dex.apk
+endif
+$(LOCAL_BUILT_MODULE):
 	@echo "target Package: $(PRIVATE_MODULE) ($@)"
-ifdef LOCAL_USE_AAPT2
-	$(call copy-file-to-new-target)
+	rm -rf $@.parts
+	mkdir -p $@.parts
+ifeq ($(LOCAL_USE_AAPT2),true)
+	cp -f $(PRIVATE_RES_PACKAGE) $@.parts/apk.zip
 else  # ! LOCAL_USE_AAPT2
-	$(if $(PRIVATE_SOURCE_ARCHIVE),\
-	  $(call initialize-package-file,$(PRIVATE_SOURCE_ARCHIVE),$@),\
-	  $(create-empty-package))
-	$(add-assets-to-package)
+	$(call create-assets-package,$@.parts/apk.zip)
 endif  # LOCAL_USE_AAPT2
 ifneq ($(jni_shared_libraries),)
-	$(add-jni-shared-libs-to-package)
+	$(call create-jni-shared-libs-package,$@.parts/jni.zip)
 endif
 ifeq ($(full_classes_jar),)
 # We don't build jar, need to add the Java resources here.
-	$(if $(PRIVATE_EXTRA_JAR_ARGS),$(call add-java-resources-to,$@))
+	$(if $(PRIVATE_EXTRA_JAR_ARGS),$(call create-java-resources-jar,$@.parts/res.zip))
 else  # full_classes_jar
-	$(add-dex-to-package)
-ifdef LOCAL_USE_AAPT2
-	$(call add-jar-resources-to-package,$@,$(PRIVATE_FULL_CLASSES_JAR),$(PRIVATE_RESOURCE_INTERMEDIATES_DIR))
-endif
+	$(call create-dex-jar,$@.parts/dex.zip,$(PRIVATE_DEX_FILE))
+	$(call extract-resources-jar,$@.parts/res.zip,$(PRIVATE_SOURCE_ARCHIVE))
 endif  # full_classes_jar
+	$(MERGE_ZIPS) $@ $@.parts/*.zip
+	rm -rf $@.parts
 ifeq (true, $(LOCAL_UNCOMPRESS_DEX))
 	@# No need to align, sign-package below will do it.
 	$(uncompress-dexs)
 endif
+# Run appcompat before stripping the classes.dex file.
+ifeq ($(module_run_appcompat),true)
+ifeq ($(LOCAL_USE_AAPT2),true)
+	$(call appcompat-header, aapt2)
+else
+	$(appcompat-header)
+endif
+	$(run-appcompat)
+endif  # module_run_appcompat
 ifdef LOCAL_DEX_PREOPT
 ifneq ($(BUILD_PLATFORM_ZIP),)
 	@# Keep a copy of apk with classes.dex unstripped
 	$(hide) cp -f $@ $(dir $@)package.dex.apk
 endif  # BUILD_PLATFORM_ZIP
-ifneq (nostripping,$(LOCAL_DEX_PREOPT))
+ifdef LOCAL_STRIP_DEX
 	$(call dexpreopt-remove-classes.dex,$@)
 endif
 endif  # LOCAL_DEX_PREOPT
@@ -642,6 +679,55 @@
 	$(compress-package)
 endif  # LOCAL_COMPRESSED_MODULE
 
+ifeq ($(LOCAL_USE_AAPT2),true)
+  my_package_res_pb := $(intermediates)/package-res.pb.apk
+  $(my_package_res_pb): $(my_res_package) $(AAPT2)
+	$(AAPT2) convert --output-format proto $< -o $@
+
+  $(my_bundle_module): $(my_package_res_pb)
+  $(my_bundle_module): PRIVATE_RES_PACKAGE := $(my_package_res_pb)
+
+  $(my_bundle_module): $(jni_shared_libraries)
+  $(my_bundle_module): PRIVATE_JNI_SHARED_LIBRARIES := $(jni_shared_libraries_with_abis)
+  $(my_bundle_module): PRIVATE_JNI_SHARED_LIBRARIES_ABI := $(jni_shared_libraries_abis)
+
+  ifneq ($(full_classes_jar),)
+    $(my_bundle_module): PRIVATE_DEX_FILE := $(built_dex)
+    # Use the jarjar processed archive as the initial package file.
+    $(my_bundle_module): PRIVATE_SOURCE_ARCHIVE := $(full_classes_pre_proguard_jar)
+    $(my_bundle_module): $(built_dex)
+  else
+    $(my_bundle_module): PRIVATE_DEX_FILE :=
+    $(my_bundle_module): PRIVATE_SOURCE_ARCHIVE :=
+  endif # full_classes_jar
+
+  $(my_bundle_module): $(MERGE_ZIPS) $(SOONG_ZIP) $(ZIP2ZIP)
+	@echo "target Bundle: $(PRIVATE_MODULE) ($@)"
+	rm -rf $@.parts
+	mkdir -p $@.parts
+	$(ZIP2ZIP) -i $(PRIVATE_RES_PACKAGE) -o $@.parts/apk.zip AndroidManifest.xml:manifest/AndroidManifest.xml resources.pb "res/**/*" "assets/**/*"
+        ifneq ($(jni_shared_libraries),)
+	  $(call create-jni-shared-libs-package,$@.parts/jni.zip)
+        endif
+        ifeq ($(full_classes_jar),)
+        # We don't build jar, need to add the Java resources here.
+	  $(if $(PRIVATE_EXTRA_JAR_ARGS),\
+	    $(call create-java-resources-jar,$@.parts/res.zip) && \
+	    $(ZIP2ZIP) -i $@.parts/res.zip -o $@.parts/res.zip.tmp "**/*:root/" && \
+	    mv -f $@.parts/res.zip.tmp $@.parts/res.zip)
+        else  # full_classes_jar
+	  $(call create-dex-jar,$@.parts/dex.zip,$(PRIVATE_DEX_FILE))
+	  $(ZIP2ZIP) -i $@.parts/dex.zip -o $@.parts/dex.zip.tmp "classes*.dex:dex/"
+	  mv -f $@.parts/dex.zip.tmp $@.parts/dex.zip
+	  $(call extract-resources-jar,$@.parts/res.zip,$(PRIVATE_SOURCE_ARCHIVE))
+	  $(ZIP2ZIP) -i $@.parts/res.zip -o $@.parts/res.zip.tmp "**/*:root/"
+	  mv -f $@.parts/res.zip.tmp $@.parts/res.zip
+        endif  # full_classes_jar
+	$(MERGE_ZIPS) $@ $@.parts/*.zip
+	rm -rf $@.parts
+  ALL_MODULES.$(LOCAL_MODULE).BUNDLE := $(my_bundle_module)
+endif
+
 ###############################
 ## Build dpi-specific apks, if it's apps_only build.
 ifdef TARGET_BUILD_APPS
@@ -656,10 +742,13 @@
 ## Rule to build the odex file
 ifdef LOCAL_DEX_PREOPT
 $(built_odex): PRIVATE_DEX_FILE := $(built_dex)
+ifeq (true, $(LOCAL_UNCOMPRESS_DEX))
+$(built_odex): $(ZIP2ZIP) $(ZIPALIGN)
+endif
 # Use pattern rule - we may have multiple built odex files.
 $(built_odex) : $(dir $(LOCAL_BUILT_MODULE))% : $(built_dex)
 	$(hide) mkdir -p $(dir $@) && rm -f $@
-	$(add-dex-to-package)
+	$(call create-dex-jar,$@,$(PRIVATE_DEX_FILE))
 ifeq (true, $(LOCAL_UNCOMPRESS_DEX))
 	$(uncompress-dexs)
 	$(align-package)
diff --git a/core/pdk_config.mk b/core/pdk_config.mk
index 57afa3f..b2c9e9e 100644
--- a/core/pdk_config.mk
+++ b/core/pdk_config.mk
@@ -13,8 +13,6 @@
 # all paths under out dir
 PDK_PLATFORM_JAVA_ZIP_JAVA_TARGET_LIB_DIR += \
   target/common/obj/JAVA_LIBRARIES/android.test.runner_intermediates \
-  target/common/obj/JAVA_LIBRARIES/android.hidl.base-V1.0-java_intermediates \
-  target/common/obj/JAVA_LIBRARIES/android.hidl.manager-V1.0-java_intermediates \
   target/common/obj/JAVA_LIBRARIES/android-common_intermediates \
   target/common/obj/JAVA_LIBRARIES/android-ex-camera2_intermediates \
   target/common/obj/JAVA_LIBRARIES/android_stubs_current_intermediates \
@@ -22,6 +20,7 @@
   target/common/obj/JAVA_LIBRARIES/conscrypt_intermediates \
   target/common/obj/JAVA_LIBRARIES/core-oj_intermediates \
   target/common/obj/JAVA_LIBRARIES/core-libart_intermediates \
+  target/common/obj/JAVA_LIBRARIES/core-simple_intermediates \
   target/common/obj/JAVA_LIBRARIES/legacy-test_intermediates \
   target/common/obj/JAVA_LIBRARIES/legacy-android-test_intermediates \
   target/common/obj/JAVA_LIBRARIES/ext_intermediates \
@@ -175,11 +174,15 @@
   # files under $(PRODUCT_OUT)/symbols to help debugging.
   # Source not included to PDK due to dependency issue, so provide symbols instead.
 
-  # We may not be building all of them.
-  # The platform.zip just silently ignores the nonexistent ones.
-  PDK_SYMBOL_FILES_LIST := \
-      system/bin/app_process32 \
-      system/bin/app_process64
+  PDK_SYMBOL_FILES_LIST :=
+  ifeq ($(TARGET_IS_64_BIT),true)
+    PDK_SYMBOL_FILES_LIST += system/bin/app_process64
+    ifdef TARGET_2ND_ARCH
+      PDK_SYMBOL_FILES_LIST += system/bin/app_process32
+    endif
+  else
+    PDK_SYMBOL_FILES_LIST += system/bin/app_process32
+  endif
 
   ifneq (,$(PDK_FUSION_PLATFORM_ZIP)$(PDK_FUSION_PLATFORM_DIR))
     # symbols should be explicitly pulled for fusion build
diff --git a/core/pdk_fusion_modules.mk b/core/pdk_fusion_modules.mk
index 9aabd0f..235acf9 100644
--- a/core/pdk_fusion_modules.mk
+++ b/core/pdk_fusion_modules.mk
@@ -37,12 +37,14 @@
 
 # The source prebuilts are extracted in the rule of _pdk_fusion_stamp.
 # Use a touch rule to establish the dependency.
+ifndef PDK_FUSION_PLATFORM_DIR
 $(3) $(11) : $(_pdk_fusion_stamp)
 	$(hide) if [ ! -f $$@ ]; then \
 	  echo 'Error: $$@ does not exist. Check your platform.zip.' 1>&2; \
 	  exit 1; \
 	fi
 	$(hide) touch $$@
+endif
 endef
 
 # We don't have a LOCAL_PATH for the auto-generated modules, so let it be the $(BUILD_SYSTEM).
diff --git a/core/prebuilt.mk b/core/prebuilt.mk
index 839e14f..fb08625 100644
--- a/core/prebuilt.mk
+++ b/core/prebuilt.mk
@@ -47,7 +47,6 @@
 include $(BUILD_SYSTEM)/module_arch_supported.mk
 ifeq ($(my_module_arch_supported),true)
 # secondary arch is supported
-OVERRIDE_BUILT_MODULE_PATH :=
 LOCAL_BUILT_MODULE :=
 LOCAL_INSTALLED_MODULE :=
 LOCAL_INTERMEDIATE_TARGETS :=
@@ -66,7 +65,6 @@
 include $(BUILD_SYSTEM)/module_arch_supported.mk
 ifeq ($(my_module_arch_supported),true)
 # host cross compilation is supported
-OVERRIDE_BUILT_MODULE_PATH :=
 LOCAL_BUILT_MODULE :=
 LOCAL_INSTALLED_MODULE :=
 LOCAL_INTERMEDIATE_TARGETS :=
@@ -81,7 +79,6 @@
 LOCAL_HOST_PREFIX := $(my_prefix)
 include $(BUILD_SYSTEM)/module_arch_supported.mk
 ifeq ($(my_module_arch_supported),true)
-OVERRIDE_BUILT_MODULE_PATH :=
 LOCAL_BUILT_MODULE :=
 LOCAL_INSTALLED_MODULE :=
 LOCAL_INTERMEDIATE_TARGETS :=
diff --git a/core/prebuilt_internal.mk b/core/prebuilt_internal.mk
index 0efda57..a4b58fc 100644
--- a/core/prebuilt_internal.mk
+++ b/core/prebuilt_internal.mk
@@ -6,14 +6,16 @@
 ##
 ###########################################################
 
+include $(BUILD_SYSTEM)/use_lld_setup.mk
+
 ifneq ($(LOCAL_PREBUILT_LIBS),)
-$(error dont use LOCAL_PREBUILT_LIBS anymore LOCAL_PATH=$(LOCAL_PATH))
+$(call pretty-error,dont use LOCAL_PREBUILT_LIBS anymore)
 endif
 ifneq ($(LOCAL_PREBUILT_EXECUTABLES),)
-$(error dont use LOCAL_PREBUILT_EXECUTABLES anymore LOCAL_PATH=$(LOCAL_PATH))
+$(call pretty-error,dont use LOCAL_PREBUILT_EXECUTABLES anymore)
 endif
 ifneq ($(LOCAL_PREBUILT_JAVA_LIBRARIES),)
-$(error dont use LOCAL_PREBUILT_JAVA_LIBRARIES anymore LOCAL_PATH=$(LOCAL_PATH))
+$(call pretty-error,dont use LOCAL_PREBUILT_JAVA_LIBRARIES anymore)
 endif
 
 my_32_64_bit_suffix := $(if $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)IS_64_BIT),64,32)
@@ -40,36 +42,12 @@
 my_strip_module := $(firstword \
   $(LOCAL_STRIP_MODULE_$($(my_prefix)$(LOCAL_2ND_ARCH_VAR_PREFIX)ARCH)) \
   $(LOCAL_STRIP_MODULE))
-my_pack_module_relocations := $(firstword \
-  $(LOCAL_PACK_MODULE_RELOCATIONS_$($(my_prefix)$(LOCAL_2ND_ARCH_VAR_PREFIX)ARCH)) \
-  $(LOCAL_PACK_MODULE_RELOCATIONS))
 
 ifeq (SHARED_LIBRARIES,$(LOCAL_MODULE_CLASS))
-  # LOCAL_COPY_TO_INTERMEDIATE_LIBRARIES indicates that this prebuilt should be
-  # installed to the common directory of libraries. This is needed for the NDK
-  # shared libraries built by soong, as we build many different versions of each
-  # library (one for each API level). Since they all have the same basename,
-  # they'd clobber each other (as well as any platform libraries by the same
-  # name).
-  ifneq ($(LOCAL_COPY_TO_INTERMEDIATE_LIBRARIES),false)
-    # Put the built targets of all shared libraries in a common directory
-    # to simplify the link line.
-    OVERRIDE_BUILT_MODULE_PATH :=  \
-        $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)OUT_INTERMEDIATE_LIBRARIES)
-  endif
   ifeq ($(LOCAL_IS_HOST_MODULE)$(my_strip_module),)
     # Strip but not try to add debuglink
     my_strip_module := no_debuglink
   endif
-
-  ifeq ($(LOCAL_IS_HOST_MODULE)$(my_pack_module_relocations),)
-    # Do not pack relocations by default
-    my_pack_module_relocations := false
-  endif
-
-  ifeq ($(DISABLE_RELOCATION_PACKER),true)
-    my_pack_module_relocations := false
-  endif
 endif
 
 ifneq ($(filter STATIC_LIBRARIES SHARED_LIBRARIES,$(LOCAL_MODULE_CLASS)),)
@@ -78,20 +56,6 @@
   prebuilt_module_is_a_library :=
 endif
 
-ifeq ($(LOCAL_MODULE_MAKEFILE),$(SOONG_ANDROID_MK))
-  ifeq ($(prebuilt_module_is_a_library),true)
-    SOONG_ALREADY_CONV := $(SOONG_ALREADY_CONV) $(LOCAL_MODULE)
-  endif
-
-  ifdef LOCAL_USE_VNDK
-    name_without_suffix := $(patsubst %.vendor,%,$(LOCAL_MODULE))
-    ifneq ($(name_without_suffix),$(LOCAL_MODULE)
-      SPLIT_VENDOR.$(LOCAL_MODULE_CLASS).$(name_without_suffix) := 1
-    endif
-    name_without_suffix :=
-  endif
-endif
-
 # Don't install static libraries by default.
 ifndef LOCAL_UNINSTALLABLE_MODULE
 ifeq (STATIC_LIBRARIES,$(LOCAL_MODULE_CLASS))
@@ -105,6 +69,17 @@
   prebuilt_module_is_dex_javalib :=
 endif
 
+# Run veridex on product, product_services and vendor modules.
+# We skip it for unbundled app builds where we cannot build veridex.
+module_run_appcompat :=
+ifeq (true,$(filter true, \
+   $(LOCAL_PRODUCT_MODULE) $(LOCAL_PRODUCT_SERVICES_MODULE) \
+   $(LOCAL_VENDOR_MODULE) $(LOCAL_PROPRIETARY_MODULE)))
+ifeq (,$(TARGET_BUILD_APPS)$(filter true,$(TARGET_BUILD_PDK)))  # ! unbundled app build
+  module_run_appcompat := true
+endif
+endif
+
 ifdef LOCAL_COMPRESSED_MODULE
 ifneq (true,$(LOCAL_COMPRESSED_MODULE))
 $(call pretty-error, Unknown value for LOCAL_COMPRESSED_MODULE $(LOCAL_COMPRESSED_MODULE))
@@ -133,35 +108,28 @@
 endif  # LOCAL_COMPRESSED_MODULE
 endif
 
-ifneq ($(filter true keep_symbols no_debuglink mini-debug-info,$(my_strip_module) $(my_pack_module_relocations)),)
+ifneq ($(filter true keep_symbols no_debuglink mini-debug-info,$(my_strip_module)),)
   ifdef LOCAL_IS_HOST_MODULE
-    $(error Cannot strip/pack host module LOCAL_PATH=$(LOCAL_PATH))
+    $(call pretty-error,Cannot strip/pack host module)
   endif
   ifeq ($(filter SHARED_LIBRARIES EXECUTABLES NATIVE_TESTS,$(LOCAL_MODULE_CLASS)),)
-    $(error Can strip/pack only shared libraries or executables LOCAL_PATH=$(LOCAL_PATH))
+    $(call pretty-error,Can strip/pack only shared libraries or executables)
   endif
   ifneq ($(LOCAL_PREBUILT_STRIP_COMMENTS),)
-    $(error Cannot strip/pack scripts LOCAL_PATH=$(LOCAL_PATH))
+    $(call pretty-error,Cannot strip/pack scripts)
   endif
-  # Set the arch-specific variables to set up the strip/pack rules.
+  # Set the arch-specific variables to set up the strip rules
   LOCAL_STRIP_MODULE_$($(my_prefix)$(LOCAL_2ND_ARCH_VAR_PREFIX)ARCH) := $(my_strip_module)
-  LOCAL_PACK_MODULE_RELOCATIONS_$($(my_prefix)$(LOCAL_2ND_ARCH_VAR_PREFIX)ARCH) := $(my_pack_module_relocations)
   include $(BUILD_SYSTEM)/dynamic_binary.mk
   built_module := $(linked_module)
 
-else  # my_strip_module and my_pack_module_relocations not true
+else  # my_strip_module not true
   include $(BUILD_SYSTEM)/base_rules.mk
   built_module := $(LOCAL_BUILT_MODULE)
 
 ifdef prebuilt_module_is_a_library
 export_includes := $(intermediates)/export_includes
 export_cflags := $(foreach d,$(LOCAL_EXPORT_C_INCLUDE_DIRS),-I $(d))
-# Soong exports cflags instead of include dirs, so that -isystem can be included.
-ifeq ($(LOCAL_MODULE_MAKEFILE),$(SOONG_ANDROID_MK))
-export_cflags += $(LOCAL_EXPORT_CFLAGS)
-else ifdef LOCAL_EXPORT_CFLAGS
-$(call pretty-error,LOCAL_EXPORT_CFLAGS can only be used by Soong, use LOCAL_EXPORT_C_INCLUDE_DIRS instead)
-endif
 $(export_includes): PRIVATE_EXPORT_CFLAGS := $(export_cflags)
 $(export_includes): $(LOCAL_EXPORT_C_INCLUDE_DEPS)
 	@echo Export includes file: $< -- $@
@@ -188,6 +156,8 @@
     else
         my_link_type := native:vendor
     endif
+else ifneq ($(filter $(TARGET_RECOVERY_OUT)/%,$(LOCAL_MODULE_PATH)),)
+my_link_type := native:recovery
 else
 my_link_type := native:platform
 endif
@@ -208,21 +178,11 @@
 # Extra shared libraries introduced by LOCAL_CXX_STL.
 include $(BUILD_SYSTEM)/cxx_stl_setup.mk
 ifdef LOCAL_USE_VNDK
-  ifneq ($(LOCAL_MODULE_MAKEFILE),$(SOONG_ANDROID_MK))
-    my_shared_libraries := $(foreach l,$(my_shared_libraries),\
-      $(if $(SPLIT_VENDOR.SHARED_LIBRARIES.$(l)),$(l).vendor,$(l)))
-  endif
+  my_shared_libraries := $(foreach l,$(my_shared_libraries),\
+    $(if $(SPLIT_VENDOR.SHARED_LIBRARIES.$(l)),$(l).vendor,$(l)))
 endif
 $(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)DEPENDENCIES_ON_SHARED_LIBRARIES += \
   $(my_register_name):$(LOCAL_INSTALLED_MODULE):$(subst $(space),$(comma),$(my_shared_libraries))
-
-# We also need the LOCAL_BUILT_MODULE dependency,
-# since we use -rpath-link which points to the built module's path.
-my_built_shared_libraries := \
-    $(addprefix $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)OUT_INTERMEDIATE_LIBRARIES)/, \
-    $(addsuffix $($(my_prefix)SHLIB_SUFFIX), \
-        $(my_shared_libraries)))
-$(LOCAL_BUILT_MODULE) : $(my_built_shared_libraries)
 endif
 endif
 
@@ -375,21 +335,30 @@
 # For PRESIGNED apks we must uncompress every .so file:
 # even if the .so file isn't for the current TARGET_ARCH,
 # we can't strip the file.
-embedded_prebuilt_jni_libs := 'lib/*.so'
+embedded_prebuilt_jni_libs :=
 endif
 ifndef embedded_prebuilt_jni_libs
 # No LOCAL_PREBUILT_JNI_LIBS, uncompress all.
-embedded_prebuilt_jni_libs := 'lib/*.so'
+embedded_prebuilt_jni_libs :=
 endif
 $(built_module): PRIVATE_EMBEDDED_JNI_LIBS := $(embedded_prebuilt_jni_libs)
+$(built_module): $(ZIP2ZIP)
 
 ifdef LOCAL_COMPRESSED_MODULE
 $(built_module) : $(MINIGZIP)
 endif
 
+ifeq ($(module_run_appcompat),true)
+$(built_module) : $(appcompat-files)
+$(LOCAL_BUILT_MODULE): PRIVATE_INSTALLED_MODULE := $(LOCAL_INSTALLED_MODULE)
+endif
+
+ifneq ($(BUILD_PLATFORM_ZIP),)
+$(built_module) : .KATI_IMPLICIT_OUTPUTS := $(dir $(LOCAL_BUILT_MODULE))package.dex.apk
+endif
 $(built_module) : $(my_prebuilt_src_file) | $(ZIPALIGN) $(SIGNAPK_JAR)
 	$(transform-prebuilt-to-target)
-	$(uncompress-shared-libs)
+	$(uncompress-prebuilt-embedded-jni-libs)
 ifeq (true, $(LOCAL_UNCOMPRESS_DEX))
 	$(uncompress-dexs)
 endif  # LOCAL_UNCOMPRESS_DEX
@@ -401,10 +370,19 @@
 endif  # LOCAL_DEX_PREOPT
 ifneq ($(LOCAL_CERTIFICATE),PRESIGNED)
 	@# Only strip out files if we can re-sign the package.
+# Run appcompat before stripping the classes.dex file.
+ifeq ($(module_run_appcompat),true)
+ifeq ($(LOCAL_USE_AAPT2),true)
+	$(call appcompat-header, aapt2)
+else
+	$(appcompat-header)
+endif
+	$(run-appcompat)
+endif  # module_run_appcompat
 ifdef LOCAL_DEX_PREOPT
-ifneq (nostripping,$(LOCAL_DEX_PREOPT))
+ifdef LOCAL_STRIP_DEX
 	$(call dexpreopt-remove-classes.dex,$@)
-endif  # LOCAL_DEX_PREOPT != nostripping
+endif  # LOCAL_STRIP_DEX
 endif  # LOCAL_DEX_PREOPT
 	$(sign-package)
 	# No need for align-package because sign-package takes care of alignment
@@ -422,7 +400,7 @@
 # can do optimizations based on whether the built module only
 # contains uncompressed dex code.
 ifdef LOCAL_DEX_PREOPT
-ifeq (nostripping,$(LOCAL_DEX_PREOPT))
+ifndef LOCAL_STRIP_DEX
 $(built_odex) : $(built_module)
 	$(call dexpreopt-one-file,$<,$@)
 else
@@ -492,7 +470,7 @@
 	@echo "Dexpreopt Jar: $(PRIVATE_MODULE) ($@)"
 	$(call dexpreopt-one-file,$<,$@)
 
-$(eval $(call dexpreopt-copy-jar,$(my_prebuilt_src_file),$(built_module),$(LOCAL_DEX_PREOPT)))
+$(eval $(call dexpreopt-copy-jar,$(my_prebuilt_src_file),$(built_module),$(LOCAL_STRIP_DEX)))
 endif # boot jar
 else # ! LOCAL_DEX_PREOPT
 $(built_module) : $(my_prebuilt_src_file)
@@ -500,10 +478,13 @@
 endif # LOCAL_DEX_PREOPT
 
 else  # ! prebuilt_module_is_dex_javalib
+ifneq ($(filter init%rc,$(notdir $(LOCAL_INSTALLED_MODULE)))$(filter %/etc/init,$(dir $(LOCAL_INSTALLED_MODULE))),)
+  $(eval $(call copy-init-script-file-checked,$(my_prebuilt_src_file),$(built_module)))
+else ifneq ($(LOCAL_PREBUILT_STRIP_COMMENTS),)
 $(built_module) : $(my_prebuilt_src_file)
-ifneq ($(LOCAL_PREBUILT_STRIP_COMMENTS),)
 	$(transform-prebuilt-to-target-strip-comments)
 else
+$(built_module) : $(my_prebuilt_src_file)
 	$(transform-prebuilt-to-target)
 endif
 ifneq ($(filter EXECUTABLES NATIVE_TESTS,$(LOCAL_MODULE_CLASS)),)
@@ -579,15 +560,24 @@
 
 my_src_jar := $(intermediates.COMMON)/aar/classes.jar
 my_src_proguard_options := $(intermediates.COMMON)/aar/proguard.txt
+my_src_android_manifest := $(intermediates.COMMON)/aar/AndroidManifest.xml
 
 $(my_src_jar) : .KATI_IMPLICIT_OUTPUTS := $(my_src_proguard_options)
+$(my_src_jar) : .KATI_IMPLICIT_OUTPUTS += $(my_src_android_manifest)
 $(my_src_jar) : $(my_src_aar)
 	$(hide) rm -rf $(dir $@) && mkdir -p $(dir $@) $(dir $@)/res
 	$(hide) unzip -qo -d $(dir $@) $<
 	# Make sure the extracted classes.jar has a new timestamp.
 	$(hide) touch $@
-	# Make sure the proguard file exists and has a new timestamp.
+	# Make sure the proguard and AndroidManifest.xml files exist
+	# and have a new timestamp.
 	$(hide) touch $(dir $@)/proguard.txt
+	$(hide) touch $(dir $@)/AndroidManifest.xml
+
+my_prebuilt_android_manifest := $(intermediates.COMMON)/manifest/AndroidManifest.xml
+$(eval $(call copy-one-file,$(my_src_android_manifest),$(my_prebuilt_android_manifest)))
+$(call add-dependency,$(LOCAL_BUILT_MODULE),$(my_prebuilt_android_manifest))
+
 else
 
 # run Jetifier if needed
@@ -611,11 +601,13 @@
 $(common_javalib_jar) : $(common_classes_jar)
 	$(transform-prebuilt-to-target)
 
+include $(BUILD_SYSTEM)/force_aapt2.mk
+
 ifdef LOCAL_AAPT2_ONLY
 LOCAL_USE_AAPT2 := true
 endif
 
-ifdef LOCAL_USE_AAPT2
+ifeq ($(LOCAL_USE_AAPT2),true)
 ifneq ($(my_src_aar),)
 
 $(intermediates.COMMON)/export_proguard_flags : $(my_src_proguard_options)
@@ -631,7 +623,7 @@
 ifneq ($(LOCAL_NO_STANDARD_LIBRARIES),true)
 ifneq ($(filter-out current system_current test_current,$(LOCAL_SDK_RES_VERSION))$(if $(TARGET_BUILD_APPS),$(filter current system_current test_current,$(LOCAL_SDK_RES_VERSION))),)
 framework_res_package_export := \
-    $(HISTORICAL_SDK_VERSIONS_ROOT)/$(LOCAL_SDK_RES_VERSION)/android.jar
+    $(call resolve-prebuilt-sdk-jar-path,$(LOCAL_SDK_RES_VERSION))
 else
 framework_res_package_export := \
     $(call intermediates-dir-for,APPS,framework-res,,COMMON)/package-export.apk
@@ -643,7 +635,7 @@
 # We needed only very few PRIVATE variables and aapt2.mk input variables. Reset the unnecessary ones.
 $(my_res_package): PRIVATE_AAPT2_CFLAGS :=
 $(my_res_package): PRIVATE_AAPT_FLAGS := --static-lib --no-static-lib-packages --auto-add-overlay
-$(my_res_package): PRIVATE_ANDROID_MANIFEST := $(intermediates.COMMON)/aar/AndroidManifest.xml
+$(my_res_package): PRIVATE_ANDROID_MANIFEST := $(my_src_android_manifest)
 $(my_res_package): PRIVATE_AAPT_INCLUDES := $(framework_res_package_export)
 $(my_res_package): PRIVATE_SOURCE_INTERMEDIATES_DIR :=
 $(my_res_package): PRIVATE_PROGUARD_OPTIONS_FILE :=
@@ -653,6 +645,7 @@
 $(my_res_package): PRIVATE_PRODUCT_AAPT_PREF_CONFIG :=
 $(my_res_package): PRIVATE_TARGET_AAPT_CHARACTERISTICS :=
 $(my_res_package) : $(framework_res_package_export)
+$(my_res_package) : $(my_src_android_manifest)
 
 full_android_manifest :=
 my_res_resources :=
@@ -671,6 +664,15 @@
 # make sure the classes.jar and javalib.jar are built before $(LOCAL_BUILT_MODULE)
 $(built_module) : $(common_javalib_jar)
 
+my_exported_sdk_libs_file := $(intermediates.COMMON)/exported-sdk-libs
+$(my_exported_sdk_libs_file): PRIVATE_EXPORTED_SDK_LIBS := $(LOCAL_EXPORT_SDK_LIBRARIES)
+$(my_exported_sdk_libs_file):
+	@echo "Export SDK libs $@"
+	$(hide) mkdir -p $(dir $@) && rm -f $@
+	$(if $(PRIVATE_EXPORTED_SDK_LIBS),\
+		$(hide) echo $(PRIVATE_EXPORTED_SDK_LIBS) | tr ' ' '\n' > $@,\
+		$(hide) touch $@)
+
 endif # ! prebuilt_module_is_dex_javalib
 endif # LOCAL_IS_HOST_MODULE is not set
 
diff --git a/core/product-graph.mk b/core/product-graph.mk
index 576d14d..1efc687 100644
--- a/core/product-graph.mk
+++ b/core/product-graph.mk
@@ -18,7 +18,7 @@
 define gather-all-products
 $(sort $(foreach p, \
 	$(eval _all_products_visited := )
-  $(call all-products-inner, $(ALL_PRODUCTS)) \
+  $(call all-products-inner, $(PARENT_PRODUCT_FILES)) \
 	, $(if $(strip $(p)),$(strip $(p)),)) \
 )
 endef
@@ -49,7 +49,7 @@
 endif
 endif
 
-really_all_products := $(call gather-all-products)
+all_products := $(call gather-all-products)
 
 open_parethesis := (
 close_parenthesis := )
@@ -66,7 +66,7 @@
 
 endef
 
-$(products_graph): PRIVATE_PRODUCTS := $(really_all_products)
+$(products_graph): PRIVATE_PRODUCTS := $(all_products)
 $(products_graph): PRIVATE_PRODUCTS_FILTER := $(products_list)
 
 $(products_graph): $(this_makefile)
@@ -105,6 +105,8 @@
 	$(hide) echo 'PRODUCT_DEFAULT_PROPERTY_OVERRIDES=$$(PRODUCTS.$(strip $(1)).PRODUCT_DEFAULT_PROPERTY_OVERRIDES)' >> $$@
 	$(hide) echo 'PRODUCT_SYSTEM_DEFAULT_PROPERTIES=$$(PRODUCTS.$(strip $(1)).PRODUCT_SYSTEM_DEFAULT_PROPERTIES)' >> $$@
 	$(hide) echo 'PRODUCT_PRODUCT_PROPERTIES=$$(PRODUCTS.$(strip $(1)).PRODUCT_PRODUCT_PROPERTIES)' >> $$@
+	$(hide) echo 'PRODUCT_PRODUCT_SERVICES_PROPERTIES=$$(PRODUCTS.$(strip $(1)).PRODUCT_PRODUCT_SERVICES_PROPERTIES)' >> $$@
+	$(hide) echo 'PRODUCT_ODM_PROPERTIES=$$(PRODUCTS.$(strip $(1)).PRODUCT_ODM_PROPERTIES)' >> $$@
 	$(hide) echo 'PRODUCT_CHARACTERISTICS=$$(PRODUCTS.$(strip $(1)).PRODUCT_CHARACTERISTICS)' >> $$@
 	$(hide) echo 'PRODUCT_COPY_FILES=$$(PRODUCTS.$(strip $(1)).PRODUCT_COPY_FILES)' >> $$@
 	$(hide) echo 'PRODUCT_OTA_PUBLIC_KEYS=$$(PRODUCTS.$(strip $(1)).PRODUCT_OTA_PUBLIC_KEYS)' >> $$@
@@ -130,7 +132,7 @@
 endef
 
 product_debug_files:=
-$(foreach p,$(really_all_products), \
+$(foreach p,$(all_products), \
 			$(eval $(call transform-product-debug, $(p))) \
 			$(eval product_debug_files += $(call product-debug-filename, $(p))) \
    )
@@ -144,3 +146,4 @@
 	dot -Tsvg -Nshape=box -o $@ $<
 
 product-graph: $(products_pdf) $(products_svg)
+.PHONY: product-graph
diff --git a/core/product.mk b/core/product.mk
index 899b806..8497b28 100644
--- a/core/product.mk
+++ b/core/product.mk
@@ -23,39 +23,77 @@
 # and the .mk suffix) of the product makefile, "<product_name>:" can be
 # omitted.
 
-# Search for AndroidProducts.mks in the given dir.
-# $(1): the path to the dir
-define _search-android-products-files-in-dir
-$(sort $(shell test -d $(1) && find -L $(1) \
-  -maxdepth 6 \
-  -name .git -prune \
-  -o -name AndroidProducts.mk -print))
-endef
-
 #
 # Returns the list of all AndroidProducts.mk files.
 # $(call ) isn't necessary.
 #
 define _find-android-products-files
-$(foreach d, device vendor product,$(call _search-android-products-files-in-dir,$(d))) \
+$(file <$(OUT_DIR)/.module_paths/AndroidProducts.mk.list) \
   $(SRC_TARGET_DIR)/product/AndroidProducts.mk
 endef
 
 #
+# For entries returned by get-product-makefiles, decode an entry to a short
+# product name. These either may be in the form of <name>:path/to/file.mk or
+# path/to/<name>.mk
+# $(1): The entry to decode
+#
+# Returns two words:
+#   <name> <file>
+#
+define _decode-product-name
+$(strip \
+  $(eval _cpm_words := $(subst :,$(space),$(1))) \
+  $(if $(word 2,$(_cpm_words)), \
+    $(wordlist 1,2,$(_cpm_words)), \
+    $(basename $(notdir $(1))) $(1)))
+endef
+
+#
+# Validates the new common lunch choices -- ensures that they're in an
+# appropriate form, and are paired with definitions of their products.
+# $(1): The new list of COMMON_LUNCH_CHOICES
+# $(2): The new list of PRODUCT_MAKEFILES
+#
+define _validate-common-lunch-choices
+$(strip $(foreach choice,$(1),\
+  $(eval _parts := $(subst -,$(space),$(choice))) \
+  $(if $(call math_lt,$(words $(_parts)),2), \
+    $(error $(LOCAL_DIR): $(choice): Invalid lunch choice)) \
+  $(if $(call math_gt_or_eq,$(words $(_parts)),4), \
+    $(error $(LOCAL_DIR): $(choice): Invalid lunch choice)) \
+  $(if $(filter-out eng userdebug user,$(word 2,$(_parts))), \
+    $(error $(LOCAL_DIR): $(choice): Invalid variant: $(word 2,$(_parts)))) \
+  $(if $(filter-out $(foreach p,$(2),$(call _decode-product-name,$(p))),$(word 1,$(_parts))), \
+    $(error $(LOCAL_DIR): $(word 1,$(_parts)): Product not defined in this file)) \
+  ))
+endef
+
+#
 # Returns the sorted concatenation of PRODUCT_MAKEFILES
 # variables set in the given AndroidProducts.mk files.
 # $(1): the list of AndroidProducts.mk files.
 #
+# As a side-effect, COMMON_LUNCH_CHOICES will be set to a
+# union of all of the COMMON_LUNCH_CHOICES definitions within
+# each AndroidProducts.mk file.
+#
 define get-product-makefiles
 $(sort \
+  $(eval _COMMON_LUNCH_CHOICES :=) \
   $(foreach f,$(1), \
     $(eval PRODUCT_MAKEFILES :=) \
+    $(eval COMMON_LUNCH_CHOICES :=) \
     $(eval LOCAL_DIR := $(patsubst %/,%,$(dir $(f)))) \
     $(eval include $(f)) \
+    $(call _validate-common-lunch-choices,$(COMMON_LUNCH_CHOICES),$(PRODUCT_MAKEFILES)) \
+    $(eval _COMMON_LUNCH_CHOICES += $(COMMON_LUNCH_CHOICES)) \
     $(PRODUCT_MAKEFILES) \
    ) \
   $(eval PRODUCT_MAKEFILES :=) \
   $(eval LOCAL_DIR :=) \
+  $(eval COMMON_LUNCH_CHOICES := $(sort $(_COMMON_LUNCH_CHOICES) $(LUNCH_MENU_CHOICES))) \
+  $(eval _COMMON_LUNCH_CHOICES :=) \
  )
 endef
 
@@ -81,6 +119,7 @@
     PRODUCT_AAPT_PREBUILT_DPI \
     PRODUCT_PACKAGES \
     PRODUCT_PACKAGES_DEBUG \
+    PRODUCT_PACKAGES_DEBUG_ASAN \
     PRODUCT_PACKAGES_ENG \
     PRODUCT_PACKAGES_TESTS \
     PRODUCT_DEVICE \
@@ -89,6 +128,8 @@
     PRODUCT_PROPERTY_OVERRIDES \
     PRODUCT_DEFAULT_PROPERTY_OVERRIDES \
     PRODUCT_PRODUCT_PROPERTIES \
+    PRODUCT_PRODUCT_SERVICES_PROPERTIES \
+    PRODUCT_ODM_PROPERTIES \
     PRODUCT_CHARACTERISTICS \
     PRODUCT_COPY_FILES \
     PRODUCT_OTA_PUBLIC_KEYS \
@@ -128,6 +169,8 @@
     PRODUCT_SYSTEM_VERITY_PARTITION \
     PRODUCT_VENDOR_VERITY_PARTITION \
     PRODUCT_PRODUCT_VERITY_PARTITION \
+    PRODUCT_PRODUCT_SERVICES_VERITY_PARTITION \
+    PRODUCT_ODM_VERITY_PARTITION \
     PRODUCT_SYSTEM_SERVER_DEBUG_INFO \
     PRODUCT_OTHER_JAVA_DEBUG_INFO \
     PRODUCT_DEX_PREOPT_MODULE_CONFIGS \
@@ -143,6 +186,8 @@
     PRODUCT_SYSTEM_BASE_FS_PATH \
     PRODUCT_VENDOR_BASE_FS_PATH \
     PRODUCT_PRODUCT_BASE_FS_PATH \
+    PRODUCT_PRODUCT_SERVICES_BASE_FS_PATH \
+    PRODUCT_ODM_BASE_FS_PATH \
     PRODUCT_SHIPPING_API_LEVEL \
     VENDOR_PRODUCT_RESTRICT_VENDOR_FILES \
     VENDOR_EXCEPTION_MODULES \
@@ -158,6 +203,16 @@
     PRODUCT_CFI_EXCLUDE_PATHS \
     PRODUCT_COMPATIBLE_PROPERTY_OVERRIDE \
     PRODUCT_ACTIONABLE_COMPATIBLE_PROPERTY_DISABLE \
+    PRODUCT_ENFORCE_ARTIFACT_PATH_REQUIREMENTS \
+    PRODUCT_ARTIFACT_PATH_REQUIREMENT_HINT \
+    PRODUCT_ARTIFACT_PATH_REQUIREMENT_WHITELIST \
+    PRODUCT_USE_DYNAMIC_PARTITION_SIZE \
+    PRODUCT_BUILD_SUPER_PARTITION \
+    PRODUCT_FORCE_PRODUCT_MODULES_TO_SYSTEM_PARTITION \
+    PRODUCT_USE_DYNAMIC_PARTITIONS \
+    PRODUCT_RETROFIT_DYNAMIC_PARTITIONS \
+    PRODUCT_OTA_ENFORCE_VINTF_KERNEL_REQUIREMENTS \
+    PRODUCT_XOM_EXCLUDE_PATHS \
 
 define dump-product
 $(info ==== $(1) ====)\
@@ -173,10 +228,14 @@
 #
 # $(1): product to inherit
 #
-# Does three things:
+# To be called from product makefiles, and is later evaluated during the import-nodes
+# call below. It does three things:
 #  1. Inherits all of the variables from $1.
 #  2. Records the inheritance in the .INHERITS_FROM variable
-#  3. Records that we've visited this node, in ALL_PRODUCTS
+#  3. Records the calling makefile in PARENT_PRODUCT_FILES
+#
+# (2) and (3) can be used together to reconstruct the include hierarchy
+# See e.g. product-graph.mk for an example of this.
 #
 define inherit-product
   $(if $(findstring ../,$(1)),\
@@ -184,13 +243,32 @@
     $(eval np := $(strip $(1))))\
   $(foreach v,$(_product_var_list), \
       $(eval $(v) := $($(v)) $(INHERIT_TAG)$(np))) \
-  $(eval inherit_var := \
-      PRODUCTS.$(strip $(word 1,$(_include_stack))).INHERITS_FROM) \
+  $(eval current_mk := $(strip $(word 1,$(_include_stack)))) \
+  $(eval inherit_var := PRODUCTS.$(current_mk).INHERITS_FROM) \
   $(eval $(inherit_var) := $(sort $($(inherit_var)) $(np))) \
-  $(eval inherit_var:=) \
-  $(eval ALL_PRODUCTS := $(sort $(ALL_PRODUCTS) $(word 1,$(_include_stack))))
+  $(eval PARENT_PRODUCT_FILES := $(sort $(PARENT_PRODUCT_FILES) $(current_mk)))
 endef
 
+# Specifies a number of path prefixes, relative to PRODUCT_OUT, where the
+# product makefile hierarchy rooted in the current node places its artifacts.
+# Creating artifacts outside the specified paths will cause a build-time error.
+define require-artifacts-in-path
+  $(eval current_mk := $(strip $(word 1,$(_include_stack)))) \
+  $(eval PRODUCTS.$(current_mk).ARTIFACT_PATH_REQUIREMENTS := $(strip $(1))) \
+  $(eval PRODUCTS.$(current_mk).ARTIFACT_PATH_WHITELIST := $(strip $(2))) \
+  $(eval ARTIFACT_PATH_REQUIREMENT_PRODUCTS := \
+    $(sort $(ARTIFACT_PATH_REQUIREMENT_PRODUCTS) $(current_mk)))
+endef
+
+# Makes including non-existant modules in PRODUCT_PACKAGES an error.
+# $(1): whitelist of non-existant modules to allow.
+define enforce-product-packages-exist
+  $(eval current_mk := $(strip $(word 1,$(_include_stack)))) \
+  $(eval PRODUCTS.$(current_mk).PRODUCT_ENFORCE_PACKAGES_EXIST := true) \
+  $(eval PRODUCTS.$(current_mk).PRODUCT_ENFORCE_PACKAGES_EXIST_WHITELIST := $(1)) \
+  $(eval .KATI_READONLY := PRODUCTS.$(current_mk).PRODUCT_ENFORCE_PACKAGES_EXIST) \
+  $(eval .KATI_READONLY := PRODUCTS.$(current_mk).PRODUCT_ENFORCE_PACKAGES_EXIST_WHITELIST)
+endef
 
 #
 # Do inherit-product only if $(1) exists
@@ -313,6 +391,10 @@
 	BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE \
 	BOARD_PRODUCTIMAGE_PARTITION_SIZE \
 	BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE \
+	BOARD_PRODUCT_SERVICESIMAGE_PARTITION_SIZE \
+	BOARD_PRODUCT_SERVICESIMAGE_FILE_SYSTEM_TYPE \
+	BOARD_ODMIMAGE_PARTITION_SIZE \
+	BOARD_ODMIMAGE_FILE_SYSTEM_TYPE \
 	BOARD_INSTALLER_CMDLINE \
 
 
@@ -321,6 +403,19 @@
 	WITH_DEXPREOPT \
 	WITH_DEXPREOPT_BOOT_IMG_AND_SYSTEM_SERVER_ONLY
 
+# Logical partitions related variables.
+_dynamic_partitions_var_list += \
+	BOARD_SYSTEMIMAGE_PARTITION_RESERVED_SIZE \
+	BOARD_VENDORIMAGE_PARTITION_RESERVED_SIZE \
+	BOARD_ODMIMAGE_PARTITION_RESERVED_SIZE \
+	BOARD_PRODUCTIMAGE_PARTITION_RESERVED_SIZE \
+	BOARD_PRODUCT_SERVICESIMAGE_PARTITION_RESERVED_SIZE \
+	BOARD_SUPER_PARTITION_SIZE \
+	BOARD_SUPER_PARTITION_GROUPS \
+
+_product_stash_var_list += $(_dynamic_partitions_var_list)
+_product_strip_var_list := $(_dynamic_partitions_var_list)
+
 #
 # Mark the variables in _product_stash_var_list as readonly
 #
@@ -331,6 +426,13 @@
  )
 endef
 
+#
+# Strip the variables in _product_strip_var_list
+#
+define strip-product-vars
+$(foreach v,$(_product_strip_var_list),$(eval $(v) := $(strip $($(v)))))
+endef
+
 define add-to-product-copy-files-if-exists
 $(if $(wildcard $(word 1,$(subst :, ,$(1)))),$(1))
 endef
diff --git a/core/product_config.mk b/core/product_config.mk
index 9406812..ac7fe91 100644
--- a/core/product_config.mk
+++ b/core/product_config.mk
@@ -195,18 +195,13 @@
 current_product_makefile :=
 all_product_makefiles :=
 $(foreach f, $(all_product_configs),\
-    $(eval _cpm_words := $(subst :,$(space),$(f)))\
+    $(eval _cpm_words := $(call _decode-product-name,$(f)))\
     $(eval _cpm_word1 := $(word 1,$(_cpm_words)))\
     $(eval _cpm_word2 := $(word 2,$(_cpm_words)))\
-    $(if $(_cpm_word2),\
-        $(eval all_product_makefiles += $(_cpm_word2))\
-        $(eval all_named_products += $(_cpm_word1))\
-        $(if $(filter $(TARGET_PRODUCT),$(_cpm_word1)),\
-            $(eval current_product_makefile += $(_cpm_word2)),),\
-        $(eval all_product_makefiles += $(f))\
-        $(eval all_named_products += $(basename $(notdir $(f))))\
-        $(if $(filter $(TARGET_PRODUCT),$(basename $(notdir $(f)))),\
-            $(eval current_product_makefile += $(f)),)))
+    $(eval all_product_makefiles += $(_cpm_word2))\
+    $(eval all_named_products += $(_cpm_word1))\
+    $(if $(filter $(TARGET_PRODUCT),$(_cpm_word1)),\
+        $(eval current_product_makefile += $(_cpm_word2)),))
 _cpm_words :=
 _cpm_word1 :=
 _cpm_word2 :=
@@ -239,14 +234,15 @@
 $(call import-products, $(current_product_makefile))
 endif  # Import all or just the current product makefile
 
+# Import all the products that have made artifact path requirements, so that we can verify
+# the artifacts they produce.
+$(foreach makefile,$(ARTIFACT_PATH_REQUIREMENT_PRODUCTS),\
+  $(if $(filter-out $(makefile),$(PRODUCTS)),$(eval $(call import-products,$(makefile))))\
+)
+
 # Sanity check
 $(check-all-products)
 
-ifneq ($(filter dump-products, $(MAKECMDGOALS)),)
-$(dump-products)
-$(error done)
-endif
-
 # Convert a short name like "sooner" into the path to the product
 # file defining that product.
 #
@@ -372,6 +368,14 @@
     $(strip $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PRODUCT_PROPERTIES))
 .KATI_READONLY := PRODUCT_PRODUCT_PROPERTIES
 
+
+# A list of property assignments, like "key = value", with zero or more
+# whitespace characters on either side of the '='.
+# used for adding properties to build.prop of product partition
+PRODUCT_PRODUCT_SERVICES_PROPERTIES := \
+    $(strip $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PRODUCT_SERVICES_PROPERTIES))
+.KATI_READONLY := PRODUCT_PRODUCT_SERVICES_PROPERTIES
+
 # Should we use the default resources or add any product specific overlays
 PRODUCT_PACKAGE_OVERLAYS := \
     $(strip $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGE_OVERLAYS))
@@ -419,6 +423,7 @@
 # Resolve and setup per-module dex-preopt configs.
 PRODUCT_DEX_PREOPT_MODULE_CONFIGS := \
     $(strip $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_DEX_PREOPT_MODULE_CONFIGS))
+DEXPREOPT_DISABLED_MODULES :=
 # If a module has multiple setups, the first takes precedence.
 _pdpmc_modules :=
 $(foreach c,$(PRODUCT_DEX_PREOPT_MODULE_CONFIGS),\
@@ -427,7 +432,9 @@
     $(eval _pdpmc_modules += $(m))\
     $(eval cf := $(patsubst $(m)=%,%,$(c)))\
     $(eval cf := $(subst $(_PDPMC_SP_PLACE_HOLDER),$(space),$(cf)))\
-    $(eval DEXPREOPT.$(TARGET_PRODUCT).$(m).CONFIG := $(cf))))
+    $(if $(filter disable,$(cf)),\
+      $(eval DEXPREOPT_DISABLED_MODULES += $(m)),\
+      $(eval DEXPREOPT.$(TARGET_PRODUCT).$(m).CONFIG := $(cf)))))
 _pdpmc_modules :=
 
 # Resolve and setup per-module sanitizer configs.
@@ -494,6 +501,10 @@
 PRODUCT_CFI_INCLUDE_PATHS := \
     $(strip $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_CFI_INCLUDE_PATHS))
 
+# Whether any paths are excluded from being set XOM when ENABLE_XOM=true
+PRODUCT_XOM_EXCLUDE_PATHS := \
+    $(strip $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_XOM_EXCLUDE_PATHS))
+
 # which Soong namespaces to export to Make
 PRODUCT_SOONG_NAMESPACES := \
     $(strip $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SOONG_NAMESPACES))
@@ -505,3 +516,42 @@
 # Whether the whitelist of actionable compatible properties should be disabled or not
 PRODUCT_ACTIONABLE_COMPATIBLE_PROPERTY_DISABLE := \
     $(strip $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_ACTIONABLE_COMPATIBLE_PROPERTY_DISABLE))
+
+# Dynamic partition feature flags.
+
+# When this is true, dynamic partitions is retrofitted on a device that has
+# already been launched without dynamic partitions. Otherwise, the device
+# is launched with dynamic partitions.
+# This flag implies PRODUCT_USE_DYNAMIC_PARTITIONS.
+PRODUCT_RETROFIT_DYNAMIC_PARTITIONS := \
+    $(strip $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_RETROFIT_DYNAMIC_PARTITIONS))
+.KATI_READONLY := PRODUCT_RETROFIT_DYNAMIC_PARTITIONS
+
+PRODUCT_USE_DYNAMIC_PARTITIONS := $(or \
+    $(strip $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_USE_DYNAMIC_PARTITIONS)), \
+    $(PRODUCT_RETROFIT_DYNAMIC_PARTITIONS))
+.KATI_READONLY := PRODUCT_USE_DYNAMIC_PARTITIONS
+
+# All requirements of PRODUCT_USE_DYNAMIC_PARTITIONS falls back to
+# PRODUCT_USE_DYNAMIC_PARTITIONS if not defined.
+PRODUCT_USE_DYNAMIC_PARTITION_SIZE := $(or \
+    $(strip $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_USE_DYNAMIC_PARTITION_SIZE)),\
+    $(PRODUCT_USE_DYNAMIC_PARTITIONS))
+.KATI_READONLY := PRODUCT_USE_DYNAMIC_PARTITION_SIZE
+PRODUCT_BUILD_SUPER_PARTITION := $(or \
+    $(strip $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_BUILD_SUPER_PARTITION)),\
+    $(PRODUCT_USE_DYNAMIC_PARTITIONS))
+.KATI_READONLY := PRODUCT_BUILD_SUPER_PARTITION
+
+# List of modules that should be forcefully unmarked from being LOCAL_PRODUCT_MODULE, and hence
+# installed on /system directory by default.
+PRODUCT_FORCE_PRODUCT_MODULES_TO_SYSTEM_PARTITION := \
+    $(strip $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_FORCE_PRODUCT_MODULES_TO_SYSTEM_PARTITION))
+.KATI_READONLY := PRODUCT_FORCE_PRODUCT_MODULES_TO_SYSTEM_PARTITION
+
+# If set, kernel configuration requirements are present in OTA package (and will be enforced
+# during OTA). Otherwise, kernel configuration requirements are enforced in VTS.
+# Devices that checks the running kernel (instead of the kernel in OTA package) should not
+# set this variable to prevent OTA failures.
+PRODUCT_OTA_ENFORCE_VINTF_KERNEL_REQUIREMENTS := \
+    $(strip $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_OTA_ENFORCE_VINTF_KERNEL_REQUIREMENTS))
diff --git a/core/sdk_check.mk b/core/sdk_check.mk
index c09fc7c..49ea2a8 100644
--- a/core/sdk_check.mk
+++ b/core/sdk_check.mk
@@ -8,11 +8,6 @@
 
 whitelisted_modules := framework-res__auto_generated_rro
 
-
-ifeq (,$(JAVA_SDK_ENFORCEMENT_ERROR))
-  JAVA_SDK_ENFORCEMENT_ERROR := APPS
-endif
-
 ifeq ($(LOCAL_SDK_VERSION)$(LOCAL_PRIVATE_PLATFORM_APIS),)
   ifeq (,$(filter $(LOCAL_MODULE),$(whitelisted_modules)))
     ifneq ($(JAVA_SDK_ENFORCEMENT_WARNING)$(JAVA_SDK_ENFORCEMENT_ERROR),)
diff --git a/core/setup_one_odex.mk b/core/setup_one_odex.mk
index 51df43e..92f58b2 100644
--- a/core/setup_one_odex.mk
+++ b/core/setup_one_odex.mk
@@ -78,21 +78,17 @@
   my_stored_preopt_class_loader_context_libs := $(call normalize-path-list, \
       $(foreach lib_name,$(my_filtered_uses_libraries),/system/framework/$(lib_name).jar))
 
-  # Fix up org.apache.http.legacy.boot since it should be org.apache.http.legacy in the manifest.
-  my_lib_names := $(patsubst org.apache.http.legacy.boot,org.apache.http.legacy,$(my_lib_names))
-  my_optional_lib_names := $(patsubst org.apache.http.legacy.boot,org.apache.http.legacy,$(my_optional_lib_names))
+  # Fix up org.apache.http.legacy.impl since it should be org.apache.http.legacy in the manifest.
+  my_lib_names := $(patsubst org.apache.http.legacy.impl,org.apache.http.legacy,$(my_lib_names))
+  my_optional_lib_names := $(patsubst org.apache.http.legacy.impl,org.apache.http.legacy,$(my_optional_lib_names))
   ifeq (,$(filter org.apache.http.legacy,$(my_lib_names) $(my_optional_lib_names)))
-    my_conditional_uses_libraries_host := $(call intermediates-dir-for,JAVA_LIBRARIES,org.apache.http.legacy.boot,,COMMON)/javalib.jar
-    my_conditional_uses_libraries_target := /system/framework/org.apache.http.legacy.boot.jar
+    my_conditional_uses_libraries_host := $(call intermediates-dir-for,JAVA_LIBRARIES,org.apache.http.legacy.impl,,COMMON)/javalib.jar
+    my_conditional_uses_libraries_target := /system/framework/org.apache.http.legacy.impl.jar
   endif
 endif
 
-# Always depend on org.apache.http.legacy.boot since it may get used by dex2oat-one-file for apps
-# targetting <SDK 28(P).
-my_always_depend_libraries := $(call intermediates-dir-for,JAVA_LIBRARIES,org.apache.http.legacy.boot,,COMMON)/javalib.jar
-
 $(my_built_odex): $(AAPT)
-$(my_built_odex): $(my_always_depend_libraries)
+$(my_built_odex): $(my_conditional_uses_libraries_host)
 $(my_built_odex): $(my_dex_preopt_system_dependencies)
 $(my_built_odex): PRIVATE_ENFORCE_USES_LIBRARIES := $(LOCAL_ENFORCE_USES_LIBRARIES)
 $(my_built_odex): PRIVATE_CONDITIONAL_USES_LIBRARIES_HOST := $(my_conditional_uses_libraries_host)
diff --git a/core/shared_library.mk b/core/shared_library.mk
index a15b1a6..2832c17 100644
--- a/core/shared_library.mk
+++ b/core/shared_library.mk
@@ -36,7 +36,6 @@
 
 ifeq ($(my_module_arch_supported),true)
 # Build for TARGET_2ND_ARCH
-OVERRIDE_BUILT_MODULE_PATH :=
 LOCAL_BUILT_MODULE :=
 LOCAL_INSTALLED_MODULE :=
 LOCAL_INTERMEDIATE_TARGETS :=
diff --git a/core/shared_library_internal.mk b/core/shared_library_internal.mk
index ab887e0..44bb020 100644
--- a/core/shared_library_internal.mk
+++ b/core/shared_library_internal.mk
@@ -13,9 +13,6 @@
 ifeq ($(strip $(LOCAL_MODULE_SUFFIX)),)
 LOCAL_MODULE_SUFFIX := $(TARGET_SHLIB_SUFFIX)
 endif
-ifneq ($(strip $(OVERRIDE_BUILT_MODULE_PATH)),)
-$(error $(LOCAL_PATH): Illegal use of OVERRIDE_BUILT_MODULE_PATH)
-endif
 ifneq ($(strip $(LOCAL_MODULE_STEM)$(LOCAL_BUILT_MODULE_STEM)$(LOCAL_MODULE_STEM_32)$(LOCAL_MODULE_STEM_64)),)
 $(error $(LOCAL_PATH): Cannot set module stem for a library)
 endif
@@ -34,13 +31,14 @@
 
 ifndef skip_build_from_source
 
-# Put the built targets of all shared libraries in a common directory
-# to simplify the link line.
-OVERRIDE_BUILT_MODULE_PATH := $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_OUT_INTERMEDIATE_LIBRARIES)
-
 include $(BUILD_SYSTEM)/dynamic_binary.mk
 
 # Define PRIVATE_ variables from global vars
+ifeq ($(LOCAL_NO_LIBCRT_BUILTINS),true)
+my_target_libcrt_builtins :=
+else
+my_target_libcrt_builtins := $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)LIBCRT_BUILTINS)
+endif
 ifeq ($(LOCAL_NO_LIBGCC),true)
 my_target_libgcc :=
 else
@@ -51,16 +49,17 @@
 my_target_crtbegin_so_o :=
 my_target_crtend_so_o :=
 else ifdef LOCAL_USE_VNDK
-my_target_crtbegin_so_o := $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_OUT_INTERMEDIATE_LIBRARIES)/crtbegin_so.vendor.o
-my_target_crtend_so_o := $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_OUT_INTERMEDIATE_LIBRARIES)/crtend_so.vendor.o
+my_target_crtbegin_so_o := $(SOONG_$(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_OBJECT_crtbegin_so.vendor)
+my_target_crtend_so_o := $(SOONG_$(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_OBJECT_crtend_so.vendor)
 else
-my_target_crtbegin_so_o := $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_OUT_INTERMEDIATE_LIBRARIES)/crtbegin_so.o
-my_target_crtend_so_o := $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_OUT_INTERMEDIATE_LIBRARIES)/crtend_so.o
+my_target_crtbegin_so_o := $(SOONG_$(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_OBJECT_crtbegin_so)
+my_target_crtend_so_o := $(SOONG_$(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_OBJECT_crtend_so)
 endif
 ifneq ($(LOCAL_SDK_VERSION),)
 my_target_crtbegin_so_o := $(wildcard $(my_ndk_sysroot_lib)/crtbegin_so.o)
 my_target_crtend_so_o := $(wildcard $(my_ndk_sysroot_lib)/crtend_so.o)
 endif
+$(linked_module): PRIVATE_TARGET_LIBCRT_BUILTINS := $(my_target_libcrt_builtins)
 $(linked_module): PRIVATE_TARGET_LIBGCC := $(my_target_libgcc)
 $(linked_module): PRIVATE_TARGET_LIBATOMIC := $(my_target_libatomic)
 $(linked_module): PRIVATE_TARGET_CRTBEGIN_SO_O := $(my_target_crtbegin_so_o)
@@ -71,6 +70,7 @@
         $(all_libraries) \
         $(my_target_crtbegin_so_o) \
         $(my_target_crtend_so_o) \
+        $(my_target_libcrt_builtins) \
         $(my_target_libgcc) \
         $(my_target_libatomic) \
         $(LOCAL_ADDITIONAL_DEPENDENCIES)
diff --git a/core/soong_app_prebuilt.mk b/core/soong_app_prebuilt.mk
index ae0d196..1440806 100644
--- a/core/soong_app_prebuilt.mk
+++ b/core/soong_app_prebuilt.mk
@@ -43,8 +43,6 @@
 endif # TURBINE_ENABLED != false
 
 
-$(eval $(call copy-one-file,$(LOCAL_PREBUILT_MODULE_FILE),$(LOCAL_BUILT_MODULE)))
-
 ifdef LOCAL_SOONG_RESOURCE_EXPORT_PACKAGE
 resource_export_package := $(intermediates.COMMON)/package-export.apk
 resource_export_stamp := $(intermediates.COMMON)/src/R.stamp
@@ -61,20 +59,61 @@
 
 java-dex: $(LOCAL_SOONG_DEX_JAR)
 
-ifdef LOCAL_DEX_PREOPT
 # defines built_odex along with rule to install odex
 include $(BUILD_SYSTEM)/dex_preopt_odex_install.mk
 
-$(built_odex): $(LOCAL_SOONG_DEX_JAR)
-	$(call dexpreopt-one-file,$<,$@)
+ifneq ($(BUILD_PLATFORM_ZIP),)
+  $(eval $(call copy-one-file,$(LOCAL_SOONG_DEX_JAR),$(dir $(LOCAL_BUILT_MODULE))package.dex.apk))
 endif
 
+ifdef LOCAL_DEX_PREOPT
+ifdef LOCAL_STRIP_DEX
+  # If we have stripped the final APK, use the original jar generated by soong.
+  $(built_odex): $(LOCAL_SOONG_DEX_JAR)
+	$(call dexpreopt-one-file,$<,$@)
+else
+  # If we haven't stripped, use the final APK for dexpreopt, as this may affect how the dex
+  # code is compiled.
+  $(built_odex): $(LOCAL_PREBUILT_MODULE_FILE)
+	$(call dexpreopt-one-file,$<,$@)
+endif  # LOCAL_STRIP_DEX
+  $(eval $(call dexpreopt-copy-jar,$(LOCAL_PREBUILT_MODULE_FILE),$(LOCAL_BUILT_MODULE),$(LOCAL_STRIP_DEX)))
+else
+  $(eval $(call copy-one-file,$(LOCAL_PREBUILT_MODULE_FILE),$(LOCAL_BUILT_MODULE)))
+endif
+
+# embedded JNI will already have been handled by soong
+my_embed_jni :=
+my_prebuilt_jni_libs :=
+ifdef LOCAL_SOONG_JNI_LIBS_$(TARGET_ARCH)
+  my_2nd_arch_prefix :=
+  LOCAL_JNI_SHARED_LIBRARIES := $(LOCAL_SOONG_JNI_LIBS_$(TARGET_ARCH))
+  include $(BUILD_SYSTEM)/install_jni_libs_internal.mk
+endif
+ifdef TARGET_2ND_ARCH
+  ifdef LOCAL_SOONG_JNI_LIBS_$(TARGET_2ND_ARCH)
+    my_2nd_arch_prefix := $(TARGET_2ND_ARCH_VAR_PREFIX)
+    LOCAL_JNI_SHARED_LIBRARIES := $(LOCAL_SOONG_JNI_LIBS_$(TARGET_2ND_ARCH))
+    include $(BUILD_SYSTEM)/install_jni_libs_internal.mk
+  endif
+endif
+LOCAL_SHARED_JNI_LIBRARIES :=
+my_embed_jni :=
+my_prebuilt_jni_libs :=
+my_2nd_arch_prefix :=
+
 PACKAGES := $(PACKAGES) $(LOCAL_MODULE)
 ifdef LOCAL_CERTIFICATE
   PACKAGES.$(LOCAL_MODULE).CERTIFICATE := $(LOCAL_CERTIFICATE)
   PACKAGES.$(LOCAL_MODULE).PRIVATE_KEY := $(patsubst %.x509.pem,%.pk8,$(LOCAL_CERTIFICATE))
 endif
 
+PACKAGES.$(LOCAL_MODULE).OVERRIDES := $(strip $(LOCAL_OVERRIDES_PACKAGES))
+
+ifdef LOCAL_SOONG_BUNDLE
+  ALL_MODULES.$(LOCAL_MODULE).BUNDLE := $(LOCAL_SOONG_BUNDLE)
+endif
+
 ifndef LOCAL_IS_HOST_MODULE
 ifeq ($(LOCAL_SDK_VERSION),system_current)
 my_link_type := java:system
@@ -102,3 +141,5 @@
       $(LOCAL_EXPORT_PACKAGE_RESOURCES), \
       $(LOCAL_SOONG_RRO_DIRS))
 endif
+
+SOONG_ALREADY_CONV := $(SOONG_ALREADY_CONV) $(LOCAL_MODULE)
diff --git a/core/soong_cc_prebuilt.mk b/core/soong_cc_prebuilt.mk
new file mode 100644
index 0000000..088b076
--- /dev/null
+++ b/core/soong_cc_prebuilt.mk
@@ -0,0 +1,198 @@
+# Native prebuilt coming from Soong.
+# Extra inputs:
+# LOCAL_SOONG_LINK_TYPE
+# LOCAL_SOONG_TOC
+# LOCAL_SOONG_UNSTRIPPED_BINARY
+
+ifneq ($(LOCAL_MODULE_MAKEFILE),$(SOONG_ANDROID_MK))
+  $(call pretty-error,soong_cc_prebuilt.mk may only be used from Soong)
+endif
+
+ifdef LOCAL_IS_HOST_MODULE
+  ifneq ($(HOST_OS),$(LOCAL_MODULE_HOST_OS))
+    my_prefix := HOST_CROSS_
+    LOCAL_HOST_PREFIX := $(my_prefix)
+  else
+    my_prefix := HOST_
+    LOCAL_HOST_PREFIX :=
+  endif
+else
+  my_prefix := TARGET_
+endif
+
+ifeq ($($(my_prefix)ARCH),$(LOCAL_MODULE_$(my_prefix)ARCH))
+  # primary arch
+  LOCAL_2ND_ARCH_VAR_PREFIX :=
+else ifeq ($($(my_prefix)2ND_ARCH),$(LOCAL_MODULE_$(my_prefix)ARCH))
+  # secondary arch
+  LOCAL_2ND_ARCH_VAR_PREFIX := $($(my_prefix)2ND_ARCH_VAR_PREFIX)
+else
+  $(call pretty-error,Unsupported LOCAL_MODULE_$(my_prefix)ARCH=$(LOCAL_MODULE_$(my_prefix)ARCH))
+endif
+
+skip_module :=
+ifeq ($(TARGET_TRANSLATE_2ND_ARCH),true)
+  ifndef LOCAL_IS_HOST_MODULE
+    ifdef LOCAL_2ND_ARCH_VAR_PREFIX
+      # Only support shared and static libraries and tests for translated arch
+      ifeq ($(filter SHARED_LIBRARIES STATIC_LIBRARIES HEADER_LIBRARIES NATIVE_TESTS,$(LOCAL_MODULE_CLASS)),)
+        skip_module := true
+      endif
+    endif
+  endif
+endif
+
+ifndef skip_module
+
+# Don't install static libraries by default.
+ifndef LOCAL_UNINSTALLABLE_MODULE
+  ifeq (STATIC_LIBRARIES,$(LOCAL_MODULE_CLASS))
+    LOCAL_UNINSTALLABLE_MODULE := true
+  endif
+endif
+
+#######################################
+include $(BUILD_SYSTEM)/base_rules.mk
+#######################################
+
+ifneq ($(filter STATIC_LIBRARIES SHARED_LIBRARIES HEADER_LIBRARIES,$(LOCAL_MODULE_CLASS)),)
+  # Soong module is a static or shared library
+  export_includes := $(intermediates)/export_includes
+  $(export_includes): PRIVATE_EXPORT_CFLAGS := $(LOCAL_EXPORT_CFLAGS)
+  $(export_includes): $(LOCAL_EXPORT_C_INCLUDE_DEPS)
+	@echo Export includes file: $< -- $@
+	$(hide) mkdir -p $(dir $@) && rm -f $@
+  ifdef LOCAL_EXPORT_CFLAGS
+	$(hide) echo "$(PRIVATE_EXPORT_CFLAGS)" >$@
+  else
+	$(hide) touch $@
+  endif
+
+  ifdef LOCAL_SOONG_TOC
+    $(eval $(call copy-one-file,$(LOCAL_SOONG_TOC),$(LOCAL_BUILT_MODULE).toc))
+    $(call add-dependency,$(LOCAL_BUILT_MODULE).toc,$(LOCAL_BUILT_MODULE))
+    $(my_all_targets): $(LOCAL_BUILT_MODULE).toc
+  endif
+
+  SOONG_ALREADY_CONV := $(SOONG_ALREADY_CONV) $(LOCAL_MODULE)
+
+  my_link_type := $(LOCAL_SOONG_LINK_TYPE)
+  my_warn_types :=
+  my_allowed_types :=
+  my_link_deps :=
+  my_2nd_arch_prefix := $(LOCAL_2ND_ARCH_VAR_PREFIX)
+  my_common :=
+  include $(BUILD_SYSTEM)/link_type.mk
+endif
+
+ifdef LOCAL_USE_VNDK
+  name_without_suffix := $(patsubst %.vendor,%,$(LOCAL_MODULE))
+  ifneq ($(name_without_suffix),$(LOCAL_MODULE)
+    SPLIT_VENDOR.$(LOCAL_MODULE_CLASS).$(name_without_suffix) := 1
+  endif
+  name_without_suffix :=
+endif
+
+# The real dependency will be added after all Android.mks are loaded and the install paths
+# of the shared libraries are determined.
+ifdef LOCAL_INSTALLED_MODULE
+  ifdef LOCAL_SHARED_LIBRARIES
+    my_shared_libraries := $(LOCAL_SHARED_LIBRARIES)
+    ifdef LOCAL_USE_VNDK
+      my_shared_libraries := $(foreach l,$(my_shared_libraries),\
+        $(if $(SPLIT_VENDOR.SHARED_LIBRARIES.$(l)),$(l).vendor,$(l)))
+    endif
+    $(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)DEPENDENCIES_ON_SHARED_LIBRARIES += \
+      $(my_register_name):$(LOCAL_INSTALLED_MODULE):$(subst $(space),$(comma),$(my_shared_libraries))
+  endif
+endif
+
+$(LOCAL_BUILT_MODULE): $(LOCAL_PREBUILT_MODULE_FILE)
+	$(transform-prebuilt-to-target)
+ifneq ($(filter EXECUTABLES NATIVE_TESTS,$(LOCAL_MODULE_CLASS)),)
+	$(hide) chmod +x $@
+endif
+
+ifndef LOCAL_IS_HOST_MODULE
+  ifdef LOCAL_SOONG_UNSTRIPPED_BINARY
+    # Store a copy with symbols for symbolic debugging
+    my_unstripped_path := $(TARGET_OUT_UNSTRIPPED)/$(patsubst $(PRODUCT_OUT)/%,%,$(my_module_path))
+    symbolic_output := $(my_unstripped_path)/$(my_installed_module_stem)
+    $(eval $(call copy-one-file,$(LOCAL_SOONG_UNSTRIPPED_BINARY),$(symbolic_output)))
+    $(call add-dependency,$(LOCAL_BUILT_MODULE),$(symbolic_output))
+
+    ifeq ($(BREAKPAD_GENERATE_SYMBOLS),true)
+      my_breakpad_path := $(TARGET_OUT_BREAKPAD)/$(patsubst $(PRODUCT_OUT)/%,%,$(my_module_path))
+      breakpad_output := $(my_breakpad_path)/$(my_installed_module_stem).sym
+      $(breakpad_output) : $(LOCAL_SOONG_UNSTRIPPED_BINARY) | $(BREAKPAD_DUMP_SYMS) $(PRIVATE_READELF)
+	@echo "target breakpad: $(PRIVATE_MODULE) ($@)"
+	@mkdir -p $(dir $@)
+	$(hide) if $(PRIVATE_READELF) -S $< > /dev/null 2>&1 ; then \
+	  $(BREAKPAD_DUMP_SYMS) -c $< > $@ ; \
+	else \
+	  echo "skipped for non-elf file."; \
+	  touch $@; \
+	fi
+      $(call add-dependency,$(LOCAL_BUILT_MODULE),$(breakpad_output))
+    endif
+  endif
+endif
+
+ifeq ($(NATIVE_COVERAGE),true)
+  ifneq (,$(strip $(LOCAL_PREBUILT_COVERAGE_ARCHIVE)))
+    $(eval $(call copy-one-file,$(LOCAL_PREBUILT_COVERAGE_ARCHIVE),$(intermediates)/$(LOCAL_MODULE).gcnodir))
+    ifneq ($(LOCAL_UNINSTALLABLE_MODULE),true)
+      ifdef LOCAL_IS_HOST_MODULE
+        my_coverage_path := $($(my_prefix)OUT_COVERAGE)/$(patsubst $($(my_prefix)OUT)/%,%,$(my_module_path))
+      else
+        my_coverage_path := $(TARGET_OUT_COVERAGE)/$(patsubst $(PRODUCT_OUT)/%,%,$(my_module_path))
+      endif
+      my_coverage_path := $(my_coverage_path)/$(patsubst %.so,%,$(my_installed_module_stem)).gcnodir
+      $(eval $(call copy-one-file,$(LOCAL_PREBUILT_COVERAGE_ARCHIVE),$(my_coverage_path)))
+      $(LOCAL_BUILT_MODULE): $(my_coverage_path)
+    endif
+  else
+    # Coverage information is needed when static lib is a dependency of another
+    # coverage-enabled module.
+    ifeq (STATIC_LIBRARIES, $(LOCAL_MODULE_CLASS))
+      GCNO_ARCHIVE := $(LOCAL_MODULE).gcnodir
+      $(intermediates)/$(GCNO_ARCHIVE) : PRIVATE_ALL_OBJECTS :=
+      $(intermediates)/$(GCNO_ARCHIVE) : PRIVATE_ALL_WHOLE_STATIC_LIBRARIES :=
+      $(intermediates)/$(GCNO_ARCHIVE) : PRIVATE_PREFIX := $(my_prefix)
+      $(intermediates)/$(GCNO_ARCHIVE) : PRIVATE_2ND_ARCH_VAR_PREFIX := $(LOCAL_2ND_ARCH_VAR_PREFIX)
+      $(intermediates)/$(GCNO_ARCHIVE) :
+	$(transform-o-to-static-lib)
+    endif
+  endif
+endif
+
+# A product may be configured to strip everything in some build variants.
+# We do the stripping as a post-install command so that LOCAL_BUILT_MODULE
+# is still with the symbols and we don't need to clean it (and relink) when
+# you switch build variant.
+ifneq ($(filter $(STRIP_EVERYTHING_BUILD_VARIANTS),$(TARGET_BUILD_VARIANT)),)
+$(LOCAL_INSTALLED_MODULE): PRIVATE_POST_INSTALL_CMD := \
+  $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_STRIP) --strip-all $(LOCAL_INSTALLED_MODULE)
+endif
+
+$(LOCAL_BUILT_MODULE): $(LOCAL_ADDITIONAL_DEPENDENCIES)
+
+# We don't care about installed static libraries, since the libraries have
+# already been linked into the module at that point. We do, however, care
+# about the NOTICE files for any static libraries that we use.
+# (see notice_files.mk)
+#
+# Filter out some NDK libraries that are not being exported.
+my_static_libraries := \
+    $(filter-out ndk_libc++_static ndk_libc++abi ndk_libandroid_support ndk_libunwind, \
+      $(LOCAL_STATIC_LIBRARIES))
+installed_static_library_notice_file_targets := \
+    $(foreach lib,$(my_static_libraries) $(LOCAL_WHOLE_STATIC_LIBRARIES), \
+      NOTICE-$(if $(LOCAL_IS_HOST_MODULE),HOST$(if $(my_host_cross),_CROSS,),TARGET)-STATIC_LIBRARIES-$(lib))
+
+$(notice_target): | $(installed_static_library_notice_file_targets)
+$(LOCAL_INSTALLED_MODULE): | $(notice_target)
+
+endif # !skip_module
+
+skip_module :=
diff --git a/core/soong_config.mk b/core/soong_config.mk
index f8cb2fb..279a612 100644
--- a/core/soong_config.mk
+++ b/core/soong_config.mk
@@ -14,31 +14,13 @@
 endif
 
 ifeq ($(WRITE_SOONG_VARIABLES),true)
-# Converts a list to a JSON list.
-# $1: List separator.
-# $2: List.
-_json_list = [$(if $(2),"$(subst $(1),"$(comma)",$(2))")]
 
-# Converts a space-separated list to a JSON list.
-json_list = $(call _json_list,$(space),$(1))
-
-# Converts a comma-separated list to a JSON list.
-csv_to_json_list = $(call _json_list,$(comma),$(1))
-
-# 1: Key name
-# 2: Value
-add_json_val = $(eval _contents := $$(_contents)    "$$(strip $$(1))":$$(space)$$(strip $$(2))$$(comma)$$(newline))
-add_json_str = $(call add_json_val,$(1),"$(strip $(2))")
-add_json_list = $(call add_json_val,$(1),$(call json_list,$(patsubst %,%,$(2))))
-add_json_csv = $(call add_json_val,$(1),$(call csv_to_json_list,$(strip $(2))))
-add_json_bool = $(call add_json_val,$(1),$(if $(strip $(2)),true,false))
-
-invert_bool = $(if $(strip $(1)),,true)
+include $(BUILD_SYSTEM)/json.mk
 
 # Create soong.variables with copies of makefile settings.  Runs every build,
 # but only updates soong.variables if it changes
 $(shell mkdir -p $(dir $(SOONG_VARIABLES)))
-_contents := {$(newline)
+$(call json_start)
 
 $(call add_json_str,  Make_suffix, -$(TARGET_PRODUCT))
 
@@ -100,6 +82,8 @@
 $(call add_json_bool, EnableCFI,                         $(call invert_bool,$(filter false,$(ENABLE_CFI))))
 $(call add_json_list, CFIExcludePaths,                   $(CFI_EXCLUDE_PATHS) $(PRODUCT_CFI_EXCLUDE_PATHS))
 $(call add_json_list, CFIIncludePaths,                   $(CFI_INCLUDE_PATHS) $(PRODUCT_CFI_INCLUDE_PATHS))
+$(call add_json_bool, EnableXOM,                         $(filter true,$(ENABLE_XOM)))
+$(call add_json_list, XOMExcludePaths,                   $(XOM_EXCLUDE_PATHS) $(PRODUCT_XOM_EXCLUDE_PATHS))
 $(call add_json_list, IntegerOverflowExcludePaths,       $(INTEGER_OVERFLOW_EXCLUDE_PATHS) $(PRODUCT_INTEGER_OVERFLOW_EXCLUDE_PATHS))
 
 $(call add_json_bool, ClangTidy,                         $(filter 1 true,$(WITH_TIDY)))
@@ -111,10 +95,9 @@
 
 $(call add_json_bool, ArtUseReadBarrier,                 $(call invert_bool,$(filter false,$(PRODUCT_ART_USE_READ_BARRIER))))
 $(call add_json_bool, Binder32bit,                       $(BINDER32BIT))
-$(call add_json_bool, Brillo,                            $(BRILLO))
 $(call add_json_str,  BtConfigIncludeDir,                $(BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR))
-$(call add_json_bool, Device_uses_hwc2,                  $(filter true,$(TARGET_USES_HWC2)))
 $(call add_json_list, DeviceKernelHeaders,               $(TARGET_PROJECT_SYSTEM_INCLUDES))
+$(call add_json_bool, DevicePrefer32BitApps,             $(filter true,$(TARGET_PREFER_32_BIT_APPS)))
 $(call add_json_bool, DevicePrefer32BitExecutables,      $(filter true,$(TARGET_PREFER_32_BIT_EXECUTABLES)))
 $(call add_json_str,  DeviceVndkVersion,                 $(BOARD_VNDK_VERSION))
 $(call add_json_str,  Platform_vndk_version,             $(PLATFORM_VNDK_VERSION))
@@ -123,6 +106,13 @@
 $(call add_json_list, Platform_systemsdk_versions,       $(PLATFORM_SYSTEMSDK_VERSIONS))
 $(call add_json_bool, Malloc_not_svelte,                 $(call invert_bool,$(filter true,$(MALLOC_SVELTE))))
 $(call add_json_str,  Override_rs_driver,                $(OVERRIDE_RS_DRIVER))
+$(call add_json_bool, UncompressPrivAppDex,              $(call invert_bool,$(filter true,$(DONT_UNCOMPRESS_PRIV_APPS_DEXS))))
+$(call add_json_list, ModulesLoadedByPrivilegedModules,  $(PRODUCT_LOADED_BY_PRIVILEGED_MODULES))
+$(call add_json_bool, DefaultStripDex,                   $(call invert_bool,$(filter nostripping,$(DEX_PREOPT_DEFAULT))))
+$(call add_json_bool, DisableDexPreopt,                  $(filter false,$(WITH_DEXPREOPT)))
+$(call add_json_list, DisableDexPreoptModules,           $(DEXPREOPT_DISABLED_MODULES))
+
+$(call add_json_bool, Product_is_iot,                    $(filter true,$(PRODUCT_IOT)))
 
 $(call add_json_bool, Treble_linker_namespaces,          $(filter true,$(PRODUCT_TREBLE_LINKER_NAMESPACES)))
 $(call add_json_bool, Enforce_vintf_manifest,            $(filter true,$(PRODUCT_ENFORCE_VINTF_MANIFEST)))
@@ -132,28 +122,34 @@
 $(call add_json_str,  VendorPath,                        $(TARGET_COPY_OUT_VENDOR))
 $(call add_json_str,  OdmPath,                           $(TARGET_COPY_OUT_ODM))
 $(call add_json_str,  ProductPath,                       $(TARGET_COPY_OUT_PRODUCT))
+$(call add_json_str,  ProductServicesPath,               $(TARGET_COPY_OUT_PRODUCT_SERVICES))
 $(call add_json_bool, MinimizeJavaDebugInfo,             $(filter true,$(PRODUCT_MINIMIZE_JAVA_DEBUG_INFO)))
 
 $(call add_json_bool, UseGoma,                           $(filter-out false,$(USE_GOMA)))
 $(call add_json_bool, Arc,                               $(filter true,$(TARGET_ARC)))
 
-$(call add_json_str,  DistDir,                           $(if $(dist_goal), $(DIST_DIR)))
-
 $(call add_json_list, NamespacesToExport,                $(PRODUCT_SOONG_NAMESPACES))
 
 $(call add_json_list, PgoAdditionalProfileDirs,          $(PGO_ADDITIONAL_PROFILE_DIRS))
 
-_contents := $(_contents)    "VendorVars": {$(newline)
+$(call add_json_list, BoardVendorSepolicyDirs,           $(BOARD_SEPOLICY_DIRS))
+$(call add_json_list, BoardOdmSepolicyDirs,              $(BOARD_ODM_SEPOLICY_DIRS))
+$(call add_json_list, BoardPlatPublicSepolicyDirs,       $(BOARD_PLAT_PUBLIC_SEPOLICY_DIR))
+$(call add_json_list, BoardPlatPrivateSepolicyDirs,      $(BOARD_PLAT_PRIVATE_SEPOLICY_DIR))
+
+$(call add_json_bool, FlattenApex,                       $(filter true,$(TARGET_FLATTEN_APEX)))
+
+$(call add_json_map, VendorVars)
 $(foreach namespace,$(SOONG_CONFIG_NAMESPACES),\
-  $(eval _contents := $$(_contents)        "$(namespace)": {$$(newline)) \
+  $(call add_json_map, $(namespace))\
   $(foreach key,$(SOONG_CONFIG_$(namespace)),\
-    $(eval _contents := $$(_contents)            "$(key)": "$(SOONG_CONFIG_$(namespace)_$(key))",$$(newline)))\
-  $(eval _contents := $$(_contents)$(if $(strip $(SOONG_CONFIG_$(namespace))),__SV_END)        },$$(newline)))
-_contents := $(_contents)$(if $(strip $(SOONG_CONFIG_NAMESPACES)),__SV_END)    },$(newline)
+    $(call add_json_str,$(key),$(SOONG_CONFIG_$(namespace)_$(key))))\
+  $(call end_json_map))
+$(call end_json_map)
 
-_contents := $(subst $(comma)$(newline)__SV_END,$(newline),$(_contents)__SV_END}$(newline))
+$(call json_end)
 
-$(file >$(SOONG_VARIABLES).tmp,$(_contents))
+$(file >$(SOONG_VARIABLES).tmp,$(json_contents))
 
 $(shell if ! cmp -s $(SOONG_VARIABLES).tmp $(SOONG_VARIABLES); then \
 	  mv $(SOONG_VARIABLES).tmp $(SOONG_VARIABLES); \
@@ -161,15 +157,4 @@
 	  rm $(SOONG_VARIABLES).tmp; \
 	fi)
 
-_json_list :=
-json_list :=
-csv_to_json_list :=
-add_json_val :=
-add_json_str :=
-add_json_list :=
-add_json_csv :=
-add_json_bool :=
-invert_bool :=
-_contents :=
-
 endif # CONFIGURE_SOONG
diff --git a/core/soong_droiddoc_prebuilt.mk b/core/soong_droiddoc_prebuilt.mk
new file mode 100644
index 0000000..08df019
--- /dev/null
+++ b/core/soong_droiddoc_prebuilt.mk
@@ -0,0 +1,39 @@
+# Droiddoc prebuilt coming from Soong.
+
+ifneq ($(LOCAL_MODULE_MAKEFILE),$(SOONG_ANDROID_MK))
+  $(call pretty-error,soong_droiddoc_prebuilt.mk may only be used from Soong)
+endif
+
+ifdef LOCAL_DROIDDOC_STUBS_SRCJAR
+$(eval $(call copy-one-file,$(LOCAL_DROIDDOC_STUBS_SRCJAR),$(OUT_DOCS)/$(LOCAL_MODULE)-stubs.srcjar))
+ALL_DOCS += $(OUT_DOCS)/$(LOCAL_MODULE)-stubs.srcjar
+
+.PHONY: $(LOCAL_MODULE)
+$(LOCAL_MODULE) : $(OUT_DOCS)/$(LOCAL_MODULE)-stubs.srcjar
+endif
+
+ifdef LOCAL_DROIDDOC_DOC_ZIP
+$(eval $(call copy-one-file,$(LOCAL_DROIDDOC_DOC_ZIP),$(OUT_DOCS)/$(LOCAL_MODULE)-docs.zip))
+$(call dist-for-goals,docs,$(OUT_DOCS)/$(LOCAL_MODULE)-docs.zip)
+
+.PHONY: $(LOCAL_MODULE)-docs.zip
+$(LOCAL_MODULE)-docs.zip : $(OUT_DOCS)/$(LOCAL_MODULE)-docs.zip
+endif
+
+ifdef LOCAL_DROIDDOC_ANNOTATIONS_ZIP
+$(eval $(call copy-one-file,$(LOCAL_DROIDDOC_ANNOTATIONS_ZIP),$(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/$(LOCAL_MODULE)_annotations.zip))
+endif
+
+ifdef LOCAL_DROIDDOC_API_VERSIONS_XML
+$(eval $(call copy-one-file,$(LOCAL_DROIDDOC_API_VERSIONS_XML),$(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/$(LOCAL_MODULE)_generated-api-versions.xml))
+endif
+
+ifdef LOCAL_DROIDDOC_JDIFF_DOC_ZIP
+$(eval $(call copy-one-file,$(LOCAL_DROIDDOC_JDIFF_DOC_ZIP),$(OUT_DOCS)/$(LOCAL_MODULE)-jdiff-docs.zip))
+$(call dist-for-goals,docs,$(OUT_DOCS)/$(LOCAL_MODULE)-jdiff-docs.zip)
+
+ALL_DOCS += $(OUT_DOCS)/$(LOCAL_MODULE)-jdiff-docs.zip
+
+.PHONY: $(LOCAL_MODULE)-jdiff
+$(LOCAL_MODULE)-jdiff : $(OUT_DOCS)/$(LOCAL_MODULE)-jdiff-docs.zip
+endif
diff --git a/core/soong_java_prebuilt.mk b/core/soong_java_prebuilt.mk
index 13b5f71..1642ba7 100644
--- a/core/soong_java_prebuilt.mk
+++ b/core/soong_java_prebuilt.mk
@@ -19,19 +19,12 @@
 full_classes_pre_proguard_jar := $(intermediates.COMMON)/classes-pre-proguard.jar
 full_classes_header_jar := $(intermediates.COMMON)/classes-header.jar
 common_javalib.jar := $(intermediates.COMMON)/javalib.jar
+hiddenapi_flags_csv := $(intermediates.COMMON)/hiddenapi/flags.csv
+hiddenapi_metadata_csv := $(intermediates.COMMON)/hiddenapi/greylist.csv
 
 $(eval $(call copy-one-file,$(LOCAL_PREBUILT_MODULE_FILE),$(full_classes_jar)))
 $(eval $(call copy-one-file,$(LOCAL_PREBUILT_MODULE_FILE),$(full_classes_pre_proguard_jar)))
 
-ifdef LOCAL_DROIDDOC_STUBS_JAR
-$(eval $(call copy-one-file,$(LOCAL_DROIDDOC_STUBS_JAR),$(OUT_DOCS)/$(LOCAL_MODULE)-stubs.srcjar))
-ALL_DOCS += $(OUT_DOCS)/$(LOCAL_MODULE)-stubs.srcjar
-endif
-
-ifdef LOCAL_DROIDDOC_DOC_ZIP
-$(eval $(call copy-one-file,$(LOCAL_DROIDDOC_DOC_ZIP),$(OUT_DOCS)/$(LOCAL_MODULE)-docs.zip))
-endif
-
 ifdef LOCAL_SOONG_JACOCO_REPORT_CLASSES_JAR
   $(eval $(call copy-one-file,$(LOCAL_SOONG_JACOCO_REPORT_CLASSES_JAR),\
     $(intermediates.COMMON)/jacoco-report-classes.jar))
@@ -63,6 +56,10 @@
   my_static_library_extra_packages := $(intermediates.COMMON)/extra_packages
   $(eval $(call copy-one-file,$(LOCAL_SOONG_STATIC_LIBRARY_EXTRA_PACKAGES),$(my_static_library_extra_packages)))
   $(call add-dependency,$(LOCAL_BUILT_MODULE),$(my_static_library_extra_packages))
+
+  my_static_library_android_manifest := $(intermediates.COMMON)/manifest/AndroidManifest.xml
+  $(eval $(call copy-one-file,$(LOCAL_FULL_MANIFEST_FILE),$(my_static_library_android_manifest)))
+  $(call add-dependency,$(LOCAL_BUILT_MODULE),$(my_static_library_android_manifest))
 endif # LOCAL_SOONG_RESOURCE_EXPORT_PACKAGE
 
 ifneq ($(TURBINE_ENABLED),false)
@@ -74,52 +71,77 @@
 endif # TURBINE_ENABLED != false
 
 ifdef LOCAL_SOONG_DEX_JAR
-  ifndef LOCAL_IS_HOST_MODULE
-    ifneq ($(filter $(LOCAL_MODULE),$(PRODUCT_BOOT_JARS)),)  # is_boot_jar
-      $(eval $(call hiddenapi-copy-soong-jar,$(LOCAL_SOONG_DEX_JAR),$(common_javalib.jar)))
-    else # !is_boot_jar
-      $(eval $(call copy-one-file,$(LOCAL_SOONG_DEX_JAR),$(common_javalib.jar)))
-    endif # is_boot_jar
-    $(eval $(call add-dependency,$(common_javalib.jar),$(full_classes_jar) $(full_classes_header_jar)))
+  ifneq ($(LOCAL_UNINSTALLABLE_MODULE),true)
+    ifndef LOCAL_IS_HOST_MODULE
+      ifneq ($(filter $(LOCAL_MODULE),$(PRODUCT_BOOT_JARS)),)  # is_boot_jar
+        # Derive greylist from classes.jar.
+        # We use full_classes_jar here, which is the post-proguard jar (on the basis that we also
+        # have a full_classes_pre_proguard_jar). This is consistent with the equivalent code in
+        # java.mk.
+        $(eval $(call hiddenapi-generate-csv,$(full_classes_jar),$(hiddenapi_flags_csv),$(hiddenapi_metadata_csv)))
+        $(eval $(call hiddenapi-copy-soong-jar,$(LOCAL_SOONG_DEX_JAR),$(common_javalib.jar)))
+      else # !is_boot_jar
+        $(eval $(call copy-one-file,$(LOCAL_SOONG_DEX_JAR),$(common_javalib.jar)))
+      endif # is_boot_jar
+      $(eval $(call add-dependency,$(common_javalib.jar),$(full_classes_jar) $(full_classes_header_jar)))
 
-    dex_preopt_profile_src_file := $(common_javalib.jar)
+      dex_preopt_profile_src_file := $(common_javalib.jar)
 
-    # defines built_odex along with rule to install odex
-    include $(BUILD_SYSTEM)/dex_preopt_odex_install.mk
+      # defines built_odex along with rule to install odex
+      include $(BUILD_SYSTEM)/dex_preopt_odex_install.mk
 
-    dex_preopt_profile_src_file :=
+      dex_preopt_profile_src_file :=
 
-    ifdef LOCAL_DEX_PREOPT
-      ifneq ($(dexpreopt_boot_jar_module),) # boot jar
-        # boot jar's rules are defined in dex_preopt.mk
-        dexpreopted_boot_jar := $(DEXPREOPT_BOOT_JAR_DIR_FULL_PATH)/$(dexpreopt_boot_jar_module)_nodex.jar
-        $(eval $(call copy-one-file,$(dexpreopted_boot_jar),$(LOCAL_BUILT_MODULE)))
+      ifdef LOCAL_DEX_PREOPT
+        ifneq ($(dexpreopt_boot_jar_module),) # boot jar
+          # boot jar's rules are defined in dex_preopt.mk
+          dexpreopted_boot_jar := $(DEXPREOPT_BOOT_JAR_DIR_FULL_PATH)/$(dexpreopt_boot_jar_module)_nodex.jar
+          $(eval $(call copy-one-file,$(dexpreopted_boot_jar),$(LOCAL_BUILT_MODULE)))
 
-        # For libart boot jars, we don't have .odex files.
-      else # ! boot jar
-        $(built_odex): PRIVATE_MODULE := $(LOCAL_MODULE)
-        # Use pattern rule - we may have multiple built odex files.
+          # For libart boot jars, we don't have .odex files.
+        else # ! boot jar
+          $(built_odex): PRIVATE_MODULE := $(LOCAL_MODULE)
+          # Use pattern rule - we may have multiple built odex files.
 $(built_odex) : $(dir $(LOCAL_BUILT_MODULE))% : $(common_javalib.jar)
 	@echo "Dexpreopt Jar: $(PRIVATE_MODULE) ($@)"
 	$(call dexpreopt-one-file,$<,$@)
 
-       $(eval $(call dexpreopt-copy-jar,$(common_javalib.jar),$(LOCAL_BUILT_MODULE),$(LOCAL_DEX_PREOPT)))
-      endif # ! boot jar
-    else # LOCAL_DEX_PREOPT
-      $(eval $(call copy-one-file,$(common_javalib.jar),$(LOCAL_BUILT_MODULE)))
-    endif # LOCAL_DEX_PREOPT
-  else # LOCAL_IS_HOST_MODULE
-    $(eval $(call copy-one-file,$(LOCAL_SOONG_DEX_JAR),$(LOCAL_BUILT_MODULE)))
-    $(eval $(call add-dependency,$(LOCAL_BUILT_MODULE),$(full_classes_jar) $(full_classes_header_jar)))
-  endif
+         $(eval $(call dexpreopt-copy-jar,$(common_javalib.jar),$(LOCAL_BUILT_MODULE),$(LOCAL_STRIP_DEX)))
+        endif # ! boot jar
+      else # LOCAL_DEX_PREOPT
+        $(eval $(call copy-one-file,$(common_javalib.jar),$(LOCAL_BUILT_MODULE)))
+      endif # LOCAL_DEX_PREOPT
+    else # LOCAL_IS_HOST_MODULE
+      $(eval $(call copy-one-file,$(LOCAL_SOONG_DEX_JAR),$(LOCAL_BUILT_MODULE)))
+      $(eval $(call add-dependency,$(LOCAL_BUILT_MODULE),$(full_classes_jar) $(full_classes_header_jar)))
+    endif
 
-  java-dex : $(LOCAL_BUILT_MODULE)
-else
+    java-dex : $(LOCAL_BUILT_MODULE)
+  else  # LOCAL_UNINSTALLABLE_MODULE
+
+    ifneq ($(filter $(LOCAL_MODULE),$(HIDDENAPI_EXTRA_APP_USAGE_JARS)),)
+      # Derive greylist from classes.jar.
+      # We use full_classes_jar here, which is the post-proguard jar (on the basis that we also
+      # have a full_classes_pre_proguard_jar). This is consistent with the equivalent code in
+      # java.mk.
+      $(eval $(call hiddenapi-generate-csv,$(full_classes_jar),$(hiddenapi_flags_csv),$(hiddenapi_metadata_csv)))
+    endif
+
+    $(eval $(call copy-one-file,$(full_classes_jar),$(LOCAL_BUILT_MODULE)))
+    $(eval $(call copy-one-file,$(LOCAL_SOONG_DEX_JAR),$(common_javalib.jar)))
+    java-dex : $(common_javalib.jar)
+  endif  # LOCAL_UNINSTALLABLE_MODULE
+else  # LOCAL_SOONG_DEX_JAR
   $(eval $(call copy-one-file,$(full_classes_jar),$(LOCAL_BUILT_MODULE)))
+endif  # LOCAL_SOONG_DEX_JAR
+
+ifdef LOCAL_SOONG_AAR
+  ALL_MODULES.$(LOCAL_MODULE).AAR := $(LOCAL_SOONG_AAR)
 endif
 
 javac-check : $(full_classes_jar)
 javac-check-$(LOCAL_MODULE) : $(full_classes_jar)
+.PHONY: javac-check-$(LOCAL_MODULE)
 
 ifndef LOCAL_IS_HOST_MODULE
 ifeq ($(LOCAL_SDK_VERSION),system_current)
@@ -143,3 +165,15 @@
 my_common := COMMON
 include $(BUILD_SYSTEM)/link_type.mk
 endif # !LOCAL_IS_HOST_MODULE
+
+# LOCAL_EXPORT_SDK_LIBRARIES set by soong is written to exported-sdk-libs file
+my_exported_sdk_libs_file := $(intermediates.COMMON)/exported-sdk-libs
+$(my_exported_sdk_libs_file): PRIVATE_EXPORTED_SDK_LIBS := $(LOCAL_EXPORT_SDK_LIBRARIES)
+$(my_exported_sdk_libs_file):
+	@echo "Export SDK libs $@"
+	$(hide) mkdir -p $(dir $@) && rm -f $@
+	$(if $(PRIVATE_EXPORTED_SDK_LIBS),\
+		$(hide) echo $(PRIVATE_EXPORTED_SDK_LIBS) | tr ' ' '\n' > $@,\
+		$(hide) touch $@)
+
+SOONG_ALREADY_CONV := $(SOONG_ALREADY_CONV) $(LOCAL_MODULE)
diff --git a/core/static_java_library.mk b/core/static_java_library.mk
index 0429dd2..2a87705 100644
--- a/core/static_java_library.mk
+++ b/core/static_java_library.mk
@@ -28,13 +28,15 @@
 
 my_res_package :=
 
+# Process Support Library dependencies.
+include $(BUILD_SYSTEM)/support_libraries.mk
+
+include $(BUILD_SYSTEM)/force_aapt2.mk
+
 ifdef LOCAL_AAPT2_ONLY
 LOCAL_USE_AAPT2 := true
 endif
 
-# Process Support Library dependencies.
-include $(BUILD_SYSTEM)/support_libraries.mk
-
 # Hack to build static Java library with Android resource
 # See bug 5714516
 all_resources :=
@@ -44,8 +46,8 @@
 need_compile_res := true
 LOCAL_RESOURCE_DIR := $(foreach d,$(LOCAL_RESOURCE_DIR),$(call clean-path,$(d)))
 endif
-ifdef LOCAL_USE_AAPT2
-ifneq ($(LOCAL_STATIC_ANDROID_LIBRARIES),)
+ifeq ($(LOCAL_USE_AAPT2),true)
+ifneq ($(strip $(LOCAL_STATIC_ANDROID_LIBRARIES) $(LOCAL_STATIC_JAVA_AAR_LIBRARIES)),)
 need_compile_res := true
 endif
 endif
@@ -82,7 +84,7 @@
 R_file_stamp := $(intermediates.COMMON)/src/R.stamp
 LOCAL_INTERMEDIATE_TARGETS += $(R_file_stamp)
 
-ifdef LOCAL_USE_AAPT2
+ifeq ($(LOCAL_USE_AAPT2),true)
 # For library we treat all the resource equal with no overlay.
 my_res_resources := $(all_resources)
 my_overlay_resources :=
@@ -110,15 +112,15 @@
 ifneq ($(LOCAL_NO_STANDARD_LIBRARIES),true)
 ifneq ($(filter-out current system_current test_current,$(LOCAL_SDK_RES_VERSION))$(if $(TARGET_BUILD_APPS),$(filter current system_current test_current,$(LOCAL_SDK_RES_VERSION))),)
 framework_res_package_export := \
-    $(HISTORICAL_SDK_VERSIONS_ROOT)/$(LOCAL_SDK_RES_VERSION)/android.jar
+    $(call resolve-prebuilt-sdk-jar-path,$(LOCAL_SDK_RES_VERSION))
 else
 framework_res_package_export := \
     $(call intermediates-dir-for,APPS,framework-res,,COMMON)/package-export.apk
 endif
 endif
 
-ifdef LOCAL_USE_AAPT2
-import_proguard_flag_files := $(strip $(foreach l,$(LOCAL_STATIC_ANDROID_LIBRARIES),\
+ifeq ($(LOCAL_USE_AAPT2),true)
+import_proguard_flag_files := $(strip $(foreach l,$(LOCAL_STATIC_ANDROID_LIBRARIES) $(LOCAL_STATIC_JAVA_AAR_LIBRARIES),\
     $(call intermediates-dir-for,JAVA_LIBRARIES,$(l),,COMMON)/export_proguard_flags))
 $(intermediates.COMMON)/export_proguard_flags: $(import_proguard_flag_files) $(addprefix $(LOCAL_PATH)/,$(LOCAL_EXPORT_PROGUARD_FLAG_FILES))
 	@echo "Export proguard flags: $@"
@@ -140,7 +142,7 @@
 
 # add --non-constant-id to prevent inlining constants.
 # AAR needs text symbol file R.txt.
-ifdef LOCAL_USE_AAPT2
+ifeq ($(LOCAL_USE_AAPT2),true)
 $(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_AAPT_FLAGS := $(LOCAL_AAPT_FLAGS) --static-lib --output-text-symbols $(intermediates.COMMON)/R.txt
 ifndef LOCAL_AAPT_NAMESPACES
   $(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_AAPT_FLAGS += --no-static-lib-packages
@@ -168,10 +170,10 @@
 $(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_MANIFEST_PACKAGE_NAME :=
 $(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_MANIFEST_INSTRUMENTATION_FOR :=
 
-ifdef LOCAL_USE_AAPT2
+ifeq ($(LOCAL_USE_AAPT2),true)
   # One more level with name res so we can zip up the flat resources that can be linked by apps.
   my_compiled_res_base_dir := $(intermediates.COMMON)/flat-res/res
-  ifneq (,$(renderscript_target_api))
+  ifneq (,$(filter-out current,$(renderscript_target_api)))
     ifneq ($(call math_gt_or_eq,$(renderscript_target_api),21),true)
       my_generated_res_zips := $(rs_generated_res_zip)
     endif  # renderscript_target_api < 21
diff --git a/core/static_library.mk b/core/static_library.mk
index 25e5279..8002e5c 100644
--- a/core/static_library.mk
+++ b/core/static_library.mk
@@ -21,7 +21,6 @@
 
 ifeq ($(my_module_arch_supported),true)
 # Build for TARGET_2ND_ARCH
-OVERRIDE_BUILT_MODULE_PATH :=
 LOCAL_BUILT_MODULE :=
 LOCAL_INSTALLED_MODULE :=
 LOCAL_INTERMEDIATE_TARGETS :=
diff --git a/core/tasks/apicheck.mk b/core/tasks/apicheck.mk
deleted file mode 100644
index f4aee3f..0000000
--- a/core/tasks/apicheck.mk
+++ /dev/null
@@ -1,165 +0,0 @@
-# Copyright (C) 2008 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#
-# Rules for running apicheck to confirm that you haven't broken
-# api compatibility or added apis illegally.
-#
-
-# skip api check for PDK buid
-ifeq (,$(filter true, $(WITHOUT_CHECK_API) $(TARGET_BUILD_PDK)))
-
-.PHONY: checkapi
-
-# Run the checkapi rules by default.
-droidcore: checkapi
-
-last_released_sdk_version := $(lastword $(call numerically_sort, \
-            $(filter-out current, \
-                $(patsubst $(SRC_API_DIR)/%.txt,%, $(wildcard $(SRC_API_DIR)/*.txt)) \
-             )\
-        ))
-
-.PHONY: check-public-api
-checkapi : check-public-api
-
-.PHONY: update-api
-
-# INTERNAL_PLATFORM_API_FILE is the one build by droiddoc.
-# Note that since INTERNAL_PLATFORM_API_FILE is the byproduct of api-stubs module,
-# (See frameworks/base/Android.mk)
-# we need to add api-stubs as additional dependency of the api check.
-
-# Check that the API we're building hasn't broken the last-released
-# SDK version.
-$(eval $(call check-api, \
-    checkpublicapi-last, \
-    $(SRC_API_DIR)/$(last_released_sdk_version).txt, \
-    $(INTERNAL_PLATFORM_API_FILE), \
-    frameworks/base/api/removed.txt, \
-    $(INTERNAL_PLATFORM_REMOVED_API_FILE), \
-    -hide 2 -hide 3 -hide 4 -hide 5 -hide 6 -hide 24 -hide 25 -hide 26 -hide 27 \
-    -error 7 -error 8 -error 9 -error 10 -error 11 -error 12 -error 13 -error 14 -error 15 \
-    -error 16 -error 17 -error 18 -error 31, \
-    cat $(BUILD_SYSTEM)/apicheck_msg_last.txt, \
-    check-public-api, \
-    $(call doc-timestamp-for,api-stubs) \
-    ))
-
-# Check that the API we're building hasn't changed from the not-yet-released
-# SDK version.
-$(eval $(call check-api, \
-    checkpublicapi-current, \
-    frameworks/base/api/current.txt, \
-    $(INTERNAL_PLATFORM_API_FILE), \
-    frameworks/base/api/removed.txt, \
-    $(INTERNAL_PLATFORM_REMOVED_API_FILE), \
-    -error 2 -error 3 -error 4 -error 5 -error 6 \
-    -error 7 -error 8 -error 9 -error 10 -error 11 -error 12 -error 13 -error 14 -error 15 \
-    -error 16 -error 17 -error 18 -error 19 -error 20 -error 21 -error 23 -error 24 \
-    -error 25 -error 26 -error 27, \
-    cat $(BUILD_SYSTEM)/apicheck_msg_current.txt, \
-    check-public-api, \
-    $(call doc-timestamp-for,api-stubs) \
-    ))
-
-.PHONY: update-public-api
-update-public-api: $(INTERNAL_PLATFORM_API_FILE) | $(ACP)
-	@echo Copying current.txt
-	$(hide) $(ACP) $(INTERNAL_PLATFORM_API_FILE) frameworks/base/api/current.txt
-	@echo Copying removed.txt
-	$(hide) $(ACP) $(INTERNAL_PLATFORM_REMOVED_API_FILE) frameworks/base/api/removed.txt
-
-update-api : update-public-api
-
-#####################Check System API#####################
-.PHONY: check-system-api
-checkapi : check-system-api
-
-# Check that the System API we're building hasn't broken the last-released
-# SDK version.
-$(eval $(call check-api, \
-    checksystemapi-last, \
-    $(SRC_SYSTEM_API_DIR)/$(last_released_sdk_version).txt, \
-    $(INTERNAL_PLATFORM_SYSTEM_API_FILE), \
-    frameworks/base/api/system-removed.txt, \
-    $(INTERNAL_PLATFORM_SYSTEM_REMOVED_API_FILE), \
-    -hide 2 -hide 3 -hide 4 -hide 5 -hide 6 -hide 24 -hide 25 -hide 26 -hide 27 \
-    -error 7 -error 8 -error 9 -error 10 -error 11 -error 12 -error 13 -error 14 -error 15 \
-    -error 16 -error 17 -error 18 -error 31, \
-    cat $(BUILD_SYSTEM)/apicheck_msg_last.txt, \
-    check-system-api, \
-    $(call doc-timestamp-for,system-api-stubs) \
-    ))
-
-# Check that the System API we're building hasn't changed from the not-yet-released
-# SDK version.
-$(eval $(call check-api, \
-    checksystemapi-current, \
-    frameworks/base/api/system-current.txt, \
-    $(INTERNAL_PLATFORM_SYSTEM_API_FILE), \
-    frameworks/base/api/system-removed.txt, \
-    $(INTERNAL_PLATFORM_SYSTEM_REMOVED_API_FILE), \
-    -error 2 -error 3 -error 4 -error 5 -error 6 \
-    -error 7 -error 8 -error 9 -error 10 -error 11 -error 12 -error 13 -error 14 -error 15 \
-    -error 16 -error 17 -error 18 -error 19 -error 20 -error 21 -error 23 -error 24 \
-    -error 25 -error 26 -error 27, \
-    cat $(BUILD_SYSTEM)/apicheck_msg_current.txt, \
-    check-system-api, \
-    $(call doc-timestamp-for,system-api-stubs) \
-    ))
-
-.PHONY: update-system-api
-update-api : update-system-api
-
-update-system-api: $(INTERNAL_PLATFORM_SYSTEM_API_FILE) | $(ACP)
-	@echo Copying system-current.txt
-	$(hide) $(ACP) $(INTERNAL_PLATFORM_SYSTEM_API_FILE) frameworks/base/api/system-current.txt
-	@echo Copying system-removed.txt
-	$(hide) $(ACP) $(INTERNAL_PLATFORM_SYSTEM_REMOVED_API_FILE) frameworks/base/api/system-removed.txt
-
-#####################Check Test API#####################
-.PHONY: check-test-api
-checkapi : check-test-api
-
-# Check that the Test API we're building hasn't changed from the not-yet-released
-# SDK version. Note that we don't check that we haven't broken the previous
-# SDK's API because the test API is meant only for CTS which is always
-# associated with the current release.
-$(eval $(call check-api, \
-    checktestapi-current, \
-    frameworks/base/api/test-current.txt, \
-    $(INTERNAL_PLATFORM_TEST_API_FILE), \
-    frameworks/base/api/test-removed.txt, \
-    $(INTERNAL_PLATFORM_TEST_REMOVED_API_FILE), \
-    -error 2 -error 3 -error 4 -error 5 -error 6 \
-    -error 7 -error 8 -error 9 -error 10 -error 11 -error 12 -error 13 -error 14 -error 15 \
-    -error 16 -error 17 -error 18 -error 19 -error 20 -error 21 -error 23 -error 24 \
-    -error 25 -error 26 -error 27, \
-    cat $(BUILD_SYSTEM)/apicheck_msg_current.txt, \
-    check-test-api, \
-    $(call doc-timestamp-for,test-api-stubs) \
-    ))
-
-.PHONY: update-test-api
-update-api : update-test-api
-
-update-test-api: $(INTERNAL_PLATFORM_TEST_API_FILE) | $(ACP)
-	@echo Copying test-current.txt
-	$(hide) $(ACP) $(INTERNAL_PLATFORM_TEST_API_FILE) frameworks/base/api/test-current.txt
-	@echo Copying test-removed.txt
-	$(hide) $(ACP) $(INTERNAL_PLATFORM_TEST_REMOVED_API_FILE) frameworks/base/api/test-removed.txt
-
-
-endif
diff --git a/core/tasks/apidiff.mk b/core/tasks/apidiff.mk
index 4eb59af..76e4749 100644
--- a/core/tasks/apidiff.mk
+++ b/core/tasks/apidiff.mk
@@ -18,4 +18,4 @@
 
 .PHONY: api-diff
 
-api-diff: offline-sdk-referenceonly-diff
+api-diff: api-stubs-docs-jdiff
diff --git a/core/tasks/check_boot_jars/check_boot_jars.py b/core/tasks/check_boot_jars/check_boot_jars.py
index 1b4540c..9d71553 100755
--- a/core/tasks/check_boot_jars/check_boot_jars.py
+++ b/core/tasks/check_boot_jars/check_boot_jars.py
@@ -39,7 +39,7 @@
   return True
 
 
-def CheckJar(jar):
+def CheckJar(whitelist_path, jar):
   """Check a jar file.
   """
   # Get the list of files inside the jar file.
@@ -55,8 +55,9 @@
       package_name = package_name.replace('/', '.')
       # Skip class without a package name
       if package_name and not whitelist_re.match(package_name):
-        print >> sys.stderr, ('Error: %s contains class file %s, which is not in the whitelist'
-                              % (jar, f))
+        print >> sys.stderr, ('Error: %s contains class file %s, whose package name %s is not '
+                              'in the whitelist %s of packages allowed on the bootclasspath.'
+                              % (jar, f, package_name, whitelist_path))
         return False
   return True
 
@@ -65,13 +66,14 @@
   if len(argv) < 2:
     print __doc__
     return 1
+  whitelist_path = argv[0]
 
-  if not LoadWhitelist(argv[0]):
+  if not LoadWhitelist(whitelist_path):
     return 1
 
   passed = True
   for jar in argv[1:]:
-    if not CheckJar(jar):
+    if not CheckJar(whitelist_path, jar):
       passed = False
   if not passed:
     return 1
diff --git a/core/tasks/check_emu_boot.mk b/core/tasks/check_emu_boot.mk
deleted file mode 100644
index 4870677..0000000
--- a/core/tasks/check_emu_boot.mk
+++ /dev/null
@@ -1,23 +0,0 @@
-check_emu_boot0 := $(DIST_DIR)/$(TARGET_PRODUCT)-$(TARGET_BUILD_VARIANT)-emulator-boot-test-result.txt
-$(check_emu_boot0) : PRIVATE_PREFIX := $(TARGET_PRODUCT)-$(TARGET_BUILD_VARIANT)
-$(check_emu_boot0) : PRIVATE_EMULATOR_BOOT_TEST_SH := device/generic/goldfish/tools/emulator_boot_test.sh
-$(check_emu_boot0) : PRIVATE_BOOT_COMPLETE_STRING := "emulator: INFO: boot completed"
-$(check_emu_boot0) : PRIVATE_BOOT_FAIL_STRING := "emulator: ERROR: fail to boot after"
-$(check_emu_boot0) : PRIVATE_SUCCESS_FILE := $(DIST_DIR)/$(PRIVATE_PREFIX)-BOOT-SUCCESS.txt
-$(check_emu_boot0) : PRIVATE_FAIL_FILE := $(DIST_DIR)/$(PRIVATE_PREFIX)-BOOT-FAIL.txt
-$(check_emu_boot0) : $(INSTALLED_QEMU_SYSTEMIMAGE)  $(INSTALLED_QEMU_VENDORIMAGE) \
-                 $(if $(BOARD_USERDATAIMAGE_PARTITION_SIZE),$(PRODUCT_OUT)/userdata.img) \
-                 $(PRODUCT_OUT)/ramdisk.img device/generic/goldfish/tools/emulator_boot_test.sh
-	@mkdir -p $(dir $(check_emu_boot0))
-	$(hide) rm -f $(check_emu_boot0)
-	$(hide) rm -f $(PRIVATE_SUCCESS_FILE)
-	$(hide) rm -f $(PRIVATE_FAIL_FILE)
-	(export ANDROID_PRODUCT_OUT=$$(cd $(PRODUCT_OUT);pwd);\
-		export ANDROID_BUILD_TOP=$$(pwd);\
-		$(PRIVATE_EMULATOR_BOOT_TEST_SH) > $(check_emu_boot0))
-	(if grep -q $(PRIVATE_BOOT_COMPLETE_STRING) $(check_emu_boot0);\
-	then echo boot_succeeded > $(PRIVATE_SUCCESS_FILE); fi)
-	(if grep -q $(PRIVATE_BOOT_FAIL_STRING) $(check_emu_boot0);\
-	then echo boot_failed > $(PRIVATE_FAIL_FILE); fi)
-.PHONY: check_emu_boot
-check_emu_boot: $(check_emu_boot0)
diff --git a/core/tasks/collect_gpl_sources.mk b/core/tasks/collect_gpl_sources.mk
index 70f0afe..acbe9be 100644
--- a/core/tasks/collect_gpl_sources.mk
+++ b/core/tasks/collect_gpl_sources.mk
@@ -12,22 +12,16 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-ifdef dist_goal
-
 # The rule below doesn't have dependenices on the files that it copies,
-# so manually generate directly into the DIST_DIR directory that is always
-# wiped between dist builds.
-gpl_source_tgz := $(DIST_DIR)/gpl_source.tgz
+# so manually generate into a PACKAGING intermediate dir, which is wiped
+# in installclean between incremental builds on build servers.
+gpl_source_tgz := $(call intermediates-dir-for,PACKAGING,gpl_source)/gpl_source.tgz
 
 # FORCE since we can't know whether any of the sources changed
 $(gpl_source_tgz): PRIVATE_PATHS := $(sort $(patsubst %/, %, $(dir $(ALL_GPL_MODULE_LICENSE_FILES))))
 $(gpl_source_tgz) : $(ALL_GPL_MODULE_LICENSE_FILES)
-	@echo Package gpl sources: $@
+	@echo Package GPL sources: $@
 	$(hide) tar cfz $@ --exclude ".git*" $(PRIVATE_PATHS)
 
 # Dist the tgz only if we are doing a full build
-ifeq (,$(TARGET_BUILD_APPS))
-droidcore: $(gpl_source_tgz)
-endif
-
-endif # dist_goal
+$(call dist-for-goals,droidcore,$(gpl_source_tgz))
diff --git a/core/tasks/deps_licenses.mk b/core/tasks/deps_licenses.mk
index bb20fa0..daf986f 100644
--- a/core/tasks/deps_licenses.mk
+++ b/core/tasks/deps_licenses.mk
@@ -40,7 +40,7 @@
 endef
 
 define print-deps-license
-$(foreach m, $(ALL_DEPS.MODULES),\
+$(foreach m, $(sort $(ALL_DEPS.MODULES)),\
   $(eval m_p := $(sort $(ALL_MODULES.$(m).PATH) $(ALL_MODULES.$(m)$(TARGET_2ND_ARCH_MODULE_SUFFIX).PATH)))\
   $(if $(filter $(PROJ_PATH),$(m_p)),\
     $(eval deps :=)\
diff --git a/core/tasks/device-tests.mk b/core/tasks/device-tests.mk
index a2b626e..0028ce4 100644
--- a/core/tasks/device-tests.mk
+++ b/core/tasks/device-tests.mk
@@ -18,12 +18,16 @@
 device-tests-zip := $(PRODUCT_OUT)/device-tests.zip
 # Create an artifact to include a list of test config files in device-tests.
 device-tests-list-zip := $(PRODUCT_OUT)/device-tests_list.zip
+my_host_shared_lib_for_device_tests := $(call copy-many-files,$(COMPATIBILITY.device-tests.HOST_SHARED_LIBRARY.FILES))
 $(device-tests-zip) : .KATI_IMPLICIT_OUTPUTS := $(device-tests-list-zip)
 $(device-tests-zip) : PRIVATE_device_tests_list := $(PRODUCT_OUT)/device-tests_list
-
-$(device-tests-zip) : $(COMPATIBILITY.device-tests.FILES) $(SOONG_ZIP)
+$(device-tests-zip) : PRIVATE_HOST_SHARED_LIBS := $(my_host_shared_lib_for_device_tests)
+$(device-tests-zip) : $(COMPATIBILITY.device-tests.FILES) $(my_host_shared_lib_for_device_tests) $(SOONG_ZIP)
 	echo $(sort $(COMPATIBILITY.device-tests.FILES)) | tr " " "\n" > $@.list
 	grep $(HOST_OUT_TESTCASES) $@.list > $@-host.list || true
+	$(hide) for shared_lib in $(PRIVATE_HOST_SHARED_LIBS); do \
+	  echo $$shared_lib >> $@-host.list; \
+	done
 	grep $(TARGET_OUT_TESTCASES) $@.list > $@-target.list || true
 	$(hide) $(SOONG_ZIP) -d -o $@ -P host -C $(HOST_OUT) -l $@-host.list -P target -C $(PRODUCT_OUT) -l $@-target.list
 	rm -f $(PRIVATE_device_tests_list)
diff --git a/core/tasks/general-tests.mk b/core/tasks/general-tests.mk
index c7f1dc9..36ab101 100644
--- a/core/tasks/general-tests.mk
+++ b/core/tasks/general-tests.mk
@@ -14,22 +14,54 @@
 
 .PHONY: general-tests
 
-general-tests-zip := $(PRODUCT_OUT)/general-tests.zip
+general_tests_tools := \
+    $(HOST_OUT_JAVA_LIBRARIES)/cts-tradefed.jar \
+    $(HOST_OUT_JAVA_LIBRARIES)/compatibility-host-util.jar \
+
+intermediates_dir := $(call intermediates-dir-for,PACKAGING,general-tests)
+general_tests_zip := $(PRODUCT_OUT)/general-tests.zip
 # Create an artifact to include a list of test config files in general-tests.
-general-tests-list-zip := $(PRODUCT_OUT)/general-tests_list.zip
-$(general-tests-zip) : .KATI_IMPLICIT_OUTPUTS := $(general-tests-list-zip)
-$(general-tests-zip) : PRIVATE_general_tests_list := $(PRODUCT_OUT)/general-tests_list
+general_tests_list_zip := $(PRODUCT_OUT)/general-tests_list.zip
 
-$(general-tests-zip) : $(COMPATIBILITY.general-tests.FILES) $(SOONG_ZIP)
-	echo $(sort $(COMPATIBILITY.general-tests.FILES)) | tr " " "\n" > $@.list
-	grep $(HOST_OUT_TESTCASES) $@.list > $@-host.list || true
-	grep $(TARGET_OUT_TESTCASES) $@.list > $@-target.list || true
-	$(hide) $(SOONG_ZIP) -d -o $@ -P host -C $(HOST_OUT) -l $@-host.list -P target -C $(PRODUCT_OUT) -l $@-target.list
-	rm -f $(PRIVATE_general_tests_list)
-	$(hide) grep -e .*.config$$ $@-host.list | sed s%$(HOST_OUT)%host%g > $(PRIVATE_general_tests_list)
-	$(hide) grep -e .*.config$$ $@-target.list | sed s%$(PRODUCT_OUT)%target%g >> $(PRIVATE_general_tests_list)
-	$(hide) $(SOONG_ZIP) -d -o $(general-tests-list-zip) -C $(dir $@) -f $(PRIVATE_general_tests_list)
-	rm -f $@.list $@-host.list $@-target.list $(PRIVATE_general_tests_list)
+# Filter shared entries between general-tests and device-tests's HOST_SHARED_LIBRARY.FILES,
+# to avoid warning about overriding commands.
+my_host_shared_lib_for_general_tests := \
+  $(foreach m,$(filter $(COMPATIBILITY.device-tests.HOST_SHARED_LIBRARY.FILES),\
+	   $(COMPATIBILITY.general-tests.HOST_SHARED_LIBRARY.FILES)),$(call word-colon,2,$(m)))
+my_general_tests_shared_lib_files := \
+  $(filter-out $(COMPATIBILITY.device-tests.HOST_SHARED_LIBRARY.FILES),\
+	 $(COMPATIBILITY.general-tests.HOST_SHARED_LIBRARY.FILES))
 
-general-tests: $(general-tests-zip)
-$(call dist-for-goals, general-tests, $(general-tests-zip) $(general-tests-list-zip))
+my_host_shared_lib_for_general_tests += $(call copy-many-files,$(my_general_tests_shared_lib_files))
+
+$(general_tests_zip) : PRIVATE_general_tests_list_zip := $(general_tests_list_zip)
+$(general_tests_zip) : .KATI_IMPLICIT_OUTPUTS := $(general_tests_list_zip)
+$(general_tests_zip) : PRIVATE_TOOLS := $(general_tests_tools)
+$(general_tests_zip) : PRIVATE_INTERMEDIATES_DIR := $(intermediates_dir)
+$(general_tests_zip) : PRIVATE_HOST_SHARED_LIBS := $(my_host_shared_lib_for_general_tests)
+$(general_tests_zip) : $(COMPATIBILITY.general-tests.FILES) $(general_tests_tools) $(my_host_shared_lib_for_general_tests) $(SOONG_ZIP)
+	rm -rf $(PRIVATE_INTERMEDIATES_DIR)
+	rm -f $@ $(PRIVATE_general_tests_list_zip)
+	mkdir -p $(PRIVATE_INTERMEDIATES_DIR) $(PRIVATE_INTERMEDIATES_DIR)/tools
+	echo $(sort $(COMPATIBILITY.general-tests.FILES)) | tr " " "\n" > $(PRIVATE_INTERMEDIATES_DIR)/list
+	grep $(HOST_OUT_TESTCASES) $(PRIVATE_INTERMEDIATES_DIR)/list > $(PRIVATE_INTERMEDIATES_DIR)/host.list || true
+	grep $(TARGET_OUT_TESTCASES) $(PRIVATE_INTERMEDIATES_DIR)/list > $(PRIVATE_INTERMEDIATES_DIR)/target.list || true
+	$(hide) for shared_lib in $(PRIVATE_HOST_SHARED_LIBS); do \
+	  echo $$shared_lib >> $(PRIVATE_INTERMEDIATES_DIR)/host.list; \
+	done
+	cp -fp $(PRIVATE_TOOLS) $(PRIVATE_INTERMEDIATES_DIR)/tools/
+	$(SOONG_ZIP) -d -o $@ \
+	  -P host -C $(PRIVATE_INTERMEDIATES_DIR) -D $(PRIVATE_INTERMEDIATES_DIR)/tools \
+	  -P host -C $(HOST_OUT) -l $(PRIVATE_INTERMEDIATES_DIR)/host.list \
+	  -P target -C $(PRODUCT_OUT) -l $(PRIVATE_INTERMEDIATES_DIR)/target.list
+	grep -e .*.config$$ $(PRIVATE_INTERMEDIATES_DIR)/host.list | sed s%$(HOST_OUT)%host%g > $(PRIVATE_INTERMEDIATES_DIR)/general-tests_list
+	grep -e .*.config$$ $(PRIVATE_INTERMEDIATES_DIR)/target.list | sed s%$(PRODUCT_OUT)%target%g >> $(PRIVATE_INTERMEDIATES_DIR)/general-tests_list
+	$(SOONG_ZIP) -d -o $(PRIVATE_general_tests_list_zip) -C $(PRIVATE_INTERMEDIATES_DIR) -f $(PRIVATE_INTERMEDIATES_DIR)/general-tests_list
+
+general-tests: $(general_tests_zip)
+$(call dist-for-goals, general-tests, $(general_tests_zip) $(general_tests_list_zip))
+
+intermediates_dir :=
+general_tests_tools :=
+general_tests_zip :=
+general_tests_list_zip :=
diff --git a/core/tasks/module-info.mk b/core/tasks/module-info.mk
index b45526f..9eb3ab3 100644
--- a/core/tasks/module-info.mk
+++ b/core/tasks/module-info.mk
@@ -13,6 +13,10 @@
 			'"installed": [$(foreach w,$(sort $(ALL_MODULES.$(m).INSTALLED)),"$(w)", )], ' \
 			'"compatibility_suites": [$(foreach w,$(sort $(ALL_MODULES.$(m).COMPATIBILITY_SUITES)),"$(w)", )], ' \
 			'"auto_test_config": [$(ALL_MODULES.$(m).auto_test_config)], ' \
+			'"module_name": "$(ALL_MODULES.$(m).MODULE_NAME)", ' \
+			'"test_config": [$(if $(ALL_MODULES.$(m).TEST_CONFIG),"$(ALL_MODULES.$(m).TEST_CONFIG)")], ' \
+			'"dependencies": [$(foreach w,$(sort $(ALL_DEPS.$(m).ALL_DEPS)),"$(w)", )], ' \
+			'"srcs": [$(foreach w,$(sort $(ALL_MODULES.$(m).SRCS)),"$(w)", )], ' \
 			'},\n' \
 	 ) | sed -e 's/, *\]/]/g' -e 's/, *\}/ }/g' -e '$$s/,$$//' >> $@
 	$(hide) echo '}' >> $@
@@ -24,3 +28,4 @@
 files: $(MODULE_INFO_JSON)
 endif
 
+$(call dist-for-goals, general-tests, $(MODULE_INFO_JSON))
diff --git a/core/tasks/oem_image.mk b/core/tasks/oem_image.mk
index 66eec22..e9c506a 100644
--- a/core/tasks/oem_image.mk
+++ b/core/tasks/oem_image.mk
@@ -33,7 +33,7 @@
 	$(call pretty,"Target oem fs image: $@")
 	@mkdir -p $(TARGET_OUT_OEM)
 	@mkdir -p $(oemimage_intermediates) && rm -rf $(oemimage_intermediates)/oem_image_info.txt
-	$(call generate-userimage-prop-dictionary, $(oemimage_intermediates)/oem_image_info.txt, skip_fsck=true)
+	$(call generate-image-prop-dictionary, $(oemimage_intermediates)/oem_image_info.txt,oem,skip_fsck=true)
 	$(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH \
 	  build/make/tools/releasetools/build_image.py \
 	  $(TARGET_OUT_OEM) $(oemimage_intermediates)/oem_image_info.txt $@ $(TARGET_OUT)
diff --git a/core/tasks/owners.mk b/core/tasks/owners.mk
new file mode 100644
index 0000000..6f32aaf
--- /dev/null
+++ b/core/tasks/owners.mk
@@ -0,0 +1,33 @@
+# Copyright (C) 2018 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# Create an artifact to include TEST_MAPPING files in source tree.
+
+.PHONY: owners
+
+intermediates := $(call intermediates-dir-for,PACKAGING,owners)
+owners_zip := $(intermediates)/owners.zip
+owners_list := $(OUT_DIR)/.module_paths/OWNERS.list
+owners := $(file <$(owners_list))
+$(owners_zip) : PRIVATE_owners := $(subst $(newline),\n,$(owners))
+
+$(owners_zip) : $(owners) $(SOONG_ZIP)
+	@echo "Building artifact to include OWNERS files."
+	rm -rf $@
+	echo -e "$(PRIVATE_owners)" > $@.list
+	$(SOONG_ZIP) -o $@ -C . -l $@.list
+	rm -f $@.list
+
+owners : $(owners_zip)
+
+$(call dist-for-goals, general-tests, $(owners_zip))
diff --git a/core/tasks/sdk-addon.mk b/core/tasks/sdk-addon.mk
index bc11b49..122161b 100644
--- a/core/tasks/sdk-addon.mk
+++ b/core/tasks/sdk-addon.mk
@@ -12,6 +12,9 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
+.PHONY: sdk_addon
+
+ifndef ONE_SHOT_MAKEFILE
 
 # If they didn't define PRODUCT_SDK_ADDON_NAME, then we won't define
 # any of these rules.
@@ -71,6 +74,12 @@
 	$(addon_dir_img):$(target_notice_file_txt):images/$(TARGET_CPU_ABI)/NOTICE.txt \
 	$(addon_dir_img):$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SDK_ADDON_SYS_IMG_SOURCE_PROP):images/source.properties
 
+
+ifeq ($(BOARD_AVB_ENABLE),true)
+files_to_copy += \
+	$(addon_dir_img):$(QEMU_VERIFIED_BOOT_PARAMS):images/$(TARGET_CPU_ABI)/VerifiedBootParams.textproto
+endif
+
 # Generate rules to copy the requested files
 $(foreach cf,$(files_to_copy), \
   $(eval _root := $(call word-colon,1,$(cf))) \
@@ -122,7 +131,6 @@
 	$(hide) $(SOONG_ZIP) -o $@ -C $(dir $(PRIVATE_STAGING_DIR)) -D $(PRIVATE_STAGING_DIR)
 
 
-.PHONY: sdk_addon
 sdk_addon: $(full_target) $(full_target_img)
 
 ifneq ($(sdk_repo_goal),)
@@ -142,3 +150,5 @@
 $(error Trying to build sdk_addon, but product '$(INTERNAL_PRODUCT)' does not define one)
 endif
 endif # addon_name
+
+endif # !ONE_SHOT_MAKEFILE
diff --git a/core/tasks/sts.mk b/core/tasks/sts.mk
index b3c3baa..0c33e1c 100644
--- a/core/tasks/sts.mk
+++ b/core/tasks/sts.mk
@@ -12,6 +12,7 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
+ifneq ($(wildcard test/sts/README.md),)
 test_suite_name := sts
 test_suite_tradefed := sts-tradefed
 test_suite_readme := test/sts/README.md
@@ -21,3 +22,4 @@
 .PHONY: sts
 sts: $(compatibility_zip)
 $(call dist-for-goals, sts, $(compatibility_zip))
+endif
diff --git a/core/tasks/test_mapping.mk b/core/tasks/test_mapping.mk
index 36275b0..da64cab 100644
--- a/core/tasks/test_mapping.mk
+++ b/core/tasks/test_mapping.mk
@@ -12,7 +12,9 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-# Create an artifact to include TEST_MAPPING files in source tree.
+# Create an artifact to include TEST_MAPPING files in source tree. Also include
+# a file (out/disabled-presubmit-tests) containing the tests that should be
+# skipped in presubmit check.
 
 .PHONY: test_mapping
 
@@ -21,13 +23,15 @@
 test_mapping_list := $(OUT_DIR)/.module_paths/TEST_MAPPING.list
 test_mappings := $(file <$(test_mapping_list))
 $(test_mappings_zip) : PRIVATE_test_mappings := $(subst $(newline),\n,$(test_mappings))
+$(test_mappings_zip) : PRIVATE_all_disabled_presubmit_tests := $(ALL_DISABLED_PRESUBMIT_TESTS)
 
 $(test_mappings_zip) : $(test_mappings) $(SOONG_ZIP)
-	@echo "Building artifact to include TEST_MAPPING files."
-	rm -rf $@
+	@echo "Building artifact to include TEST_MAPPING files and tests to skip in presubmit check."
+	rm -rf $@ $(dir $@)/disabled-presubmit-tests
+	echo $(sort $(PRIVATE_all_disabled_presubmit_tests)) | tr " " "\n" > $(dir $@)/disabled-presubmit-tests
 	echo -e "$(PRIVATE_test_mappings)" > $@.list
-	$(SOONG_ZIP) -o $@ -C . -l $@.list
-	rm -f $@.list
+	$(SOONG_ZIP) -o $@ -C . -l $@.list -C $(dir $@) -f $(dir $@)/disabled-presubmit-tests
+	rm -f $@.list $(dir $@)/disabled-presubmit-tests
 
 test_mapping : $(test_mappings_zip)
 
diff --git a/core/tasks/tools/compatibility.mk b/core/tasks/tools/compatibility.mk
index 3d1d783..57a5cf9 100644
--- a/core/tasks/tools/compatibility.mk
+++ b/core/tasks/tools/compatibility.mk
@@ -35,7 +35,6 @@
   $(HOST_OUT_JAVA_LIBRARIES)/compatibility-host-util-tests.jar \
   $(HOST_OUT_JAVA_LIBRARIES)/compatibility-common-util-tests.jar \
   $(HOST_OUT_JAVA_LIBRARIES)/compatibility-tradefed-tests.jar \
-  $(HOST_OUT_JAVA_LIBRARIES)/host-libprotobuf-java-full.jar \
   $(HOST_OUT_JAVA_LIBRARIES)/$(test_suite_tradefed).jar \
   $(HOST_OUT_JAVA_LIBRARIES)/$(test_suite_tradefed)-tests.jar \
   $(HOST_OUT_EXECUTABLES)/$(test_suite_tradefed) \
@@ -52,6 +51,7 @@
 $(compatibility_zip): $(test_artifacts) $(test_tools) $(test_suite_prebuilt_tools) $(test_suite_dynamic_config) $(SOONG_ZIP) | $(ADB) $(ACP)
 # Make dir structure
 	$(hide) mkdir -p $(PRIVATE_OUT_DIR)/tools $(PRIVATE_OUT_DIR)/testcases
+	$(hide) echo $(BUILD_NUMBER_FROM_FILE) > $(PRIVATE_OUT_DIR)/tools/version.txt
 # Copy tools
 	$(hide) $(ACP) -fp $(PRIVATE_TOOLS) $(PRIVATE_OUT_DIR)/tools
 	$(if $(PRIVATE_DYNAMIC_CONFIG),$(hide) $(ACP) -fp $(PRIVATE_DYNAMIC_CONFIG) $(PRIVATE_OUT_DIR)/testcases/$(PRIVATE_SUITE_NAME).dynamic)
diff --git a/core/tasks/tools/package-modules.mk b/core/tasks/tools/package-modules.mk
index 4155a39..629a9b2 100644
--- a/core/tasks/tools/package-modules.mk
+++ b/core/tasks/tools/package-modules.mk
@@ -28,10 +28,9 @@
 
 # Ignore unknown installed files on partial builds
 my_missing_files :=
-# These warnings are too noisy, silence them for now.
-#ifneq ($(ALLOW_MISSING_DEPENDENCIES),true)
-#my_missing_files = $(shell $(call echo-warning,$(my_makefile),$(my_package_name): Unknown installed file for module '$(1)'))
-#endif
+ifneq ($(ALLOW_MISSING_DEPENDENCIES),true)
+my_missing_files = $(shell $(call echo-warning,$(my_makefile),$(my_package_name): Unknown installed file for module '$(1)'))
+endif
 
 # Iterate over modules' built files and installed files;
 # Calculate the dest files in the output zip file.
diff --git a/core/tasks/vndk.mk b/core/tasks/vndk.mk
index b9133df..9420638 100644
--- a/core/tasks/vndk.mk
+++ b/core/tasks/vndk.mk
@@ -23,67 +23,41 @@
 # BOARD_VNDK_RUNTIME_DISABLE must not be set to 'true'.
 ifneq ($(BOARD_VNDK_RUNTIME_DISABLE),true)
 
-# Returns arch-specific libclang_rt.ubsan* library name.
-# Because VNDK_CORE_LIBRARIES includes all arch variants for libclang_rt.ubsan*
-# libs, the arch-specific libs are selected separately.
-#
-# Args:
-#   $(1): if not empty, evaluates for TARGET_2ND_ARCH
-define clang-ubsan-vndk-core
-$(strip \
-  $(eval prefix := $(if $(1),2ND_,)) \
-  $(addsuffix .vendor,$($(addprefix $(prefix),UBSAN_RUNTIME_LIBRARY))) \
-)
-endef
-
-# Returns list of file paths of the intermediate objs
+# Returns list of src:dest paths of the intermediate objs
 #
 # Args:
 #   $(1): list of module and filename pairs (e.g., ld.config.txt:ld.config.27.txt ...)
-#   $(2): target class (e.g., SHARED_LIBRARIES, STATIC_LIBRARIES, ETC)
-#   $(3): if not empty, evaluates for TARGET_2ND_ARCH
+#   $(2): if not empty, evaluates for TARGET_2ND_ARCH
 define paths-of-intermediates
 $(strip \
   $(foreach pair,$(1), \
-    $(eval split_pair := $(subst :,$(space),$(pair))) \
-    $(eval module := $(word 1,$(split_pair))) \
-    $(eval filename := $(word 2,$(split_pair))) \
-    $(eval dir := $(call intermediates-dir-for,$(2),$(module),,,$(3))) \
-    $(call append-path,$(dir),$(filename)) \
+    $(eval module := $(call word-colon,1,$(pair))$(if $(2),$(TARGET_2ND_ARCH_MODULE_SUFFIX))) \
+    $(eval built := $(ALL_MODULES.$(module).BUILT_INSTALLED)) \
+    $(eval filename := $(call word-colon,2,$(pair))) \
+    $(if $(wordlist 2,100,$(built)), \
+      $(error Unable to handle multiple built files ($(module)): $(built))) \
+    $(if $(built),$(call word-colon,1,$(built)):$(filename)) \
   ) \
 )
 endef
 
-# Returns paths of notice files under $(TARGET_OUT_NOTICE_FILES)
+# Returns src:dest list of notice files
 #
 # Args:
 #   $(1): list of lib names (e.g., libfoo.vendor)
-#   $(2): vndk lib type, one of 'vndk' or 'vndk-sp'
 define paths-of-notice-files
 $(strip \
-  $(eval lib_dir := lib$(if $(TARGET_IS_64BIT),64,)) \
-  $(eval vndk_dir := $(2)-$(PLATFORM_VNDK_VERSION)) \
   $(foreach lib,$(1), \
-    $(eval notice_file_name := $(patsubst %.vendor,%.so.txt,$(lib))) \
-    $(TARGET_OUT_NOTICE_FILES)/src/system/$(lib_dir)/$(vndk_dir)/$(notice_file_name) \
-  ) \
-)
+    $(eval notice := $(sort \
+      $(ALL_MODULES.$(lib).NOTICES) \
+      $(if $(TARGET_2ND_ARCH),
+        $(ALL_MODULES.$(lib)$(TARGET_2ND_ARCH_MODULE_SUFFIX).NOTICES)))) \
+    $(if $(wordlist 2,100,$(notice)), \
+      $(error Unable to handle multiple notice files ($(lib)): $(notice))) \
+    $(if $(notice),$(notice):$(subst .vendor,,$(lib)).so.txt)))
 endef
 
-# If in the future libclang_rt.ubsan* is removed from the VNDK-core list,
-# need to update the related logic in this file.
-ifeq (,$(filter libclang_rt.ubsan%,$(VNDK_CORE_LIBRARIES)))
-  $(warning libclang_rt.ubsan* is no longer a VNDK-core library. Please update this file.)
-  vndk_core_libs := $(addsuffix .vendor,$(VNDK_CORE_LIBRARIES))
-else
-  vndk_core_libs := $(addsuffix .vendor,$(filter-out libclang_rt.ubsan%,$(VNDK_CORE_LIBRARIES)))
-
-  vndk_core_libs += $(call clang-ubsan-vndk-core)
-  ifdef TARGET_2ND_ARCH
-    vndk_core_libs += $(call clang-ubsan-vndk-core,true)
-  endif
-endif
-
+vndk_core_libs := $(addsuffix .vendor,$(VNDK_CORE_LIBRARIES))
 vndk_sp_libs := $(addsuffix .vendor,$(VNDK_SAMEPROCESS_LIBRARIES))
 vndk_private_libs := $(addsuffix .vendor,$(VNDK_PRIVATE_LIBRARIES))
 
@@ -103,34 +77,37 @@
 #######################################
 # vndkcore.libraries.txt
 vndkcore.libraries.txt := $(vndk_snapshot_configs_out)/vndkcore.libraries.txt
-$(vndkcore.libraries.txt): $(vndk_core_libs)
+$(vndkcore.libraries.txt): PRIVATE_LIBS := $(vndk_core_libs)
+$(vndkcore.libraries.txt):
 	@echo 'Generating: $@'
 	@rm -f $@
 	@mkdir -p $(dir $@)
 	$(hide) echo -n > $@
-	$(hide) $(foreach lib,$^,echo $(patsubst %.vendor,%,$(lib)).so >> $@;)
+	$(hide) $(foreach lib,$(PRIVATE_LIBS),echo $(patsubst %.vendor,%,$(lib)).so >> $@;)
 
 
 #######################################
 # vndkprivate.libraries.txt
 vndkprivate.libraries.txt := $(vndk_snapshot_configs_out)/vndkprivate.libraries.txt
-$(vndkprivate.libraries.txt): $(vndk_private_libs)
+$(vndkprivate.libraries.txt): PRIVATE_LIBS := $(vndk_private_libs)
+$(vndkprivate.libraries.txt):
 	@echo 'Generating: $@'
 	@rm -f $@
 	@mkdir -p $(dir $@)
 	$(hide) echo -n > $@
-	$(hide) $(foreach lib,$^,echo $(patsubst %.vendor,%,$(lib)).so >> $@;)
+	$(hide) $(foreach lib,$(PRIVATE_LIBS),echo $(patsubst %.vendor,%,$(lib)).so >> $@;)
 
 
 #######################################
 # module_paths.txt
 module_paths.txt := $(vndk_snapshot_configs_out)/module_paths.txt
-$(module_paths.txt): $(vndk_snapshot_libs)
+$(module_paths.txt): PRIVATE_LIBS := $(vndk_snapshot_libs)
+$(module_paths.txt):
 	@echo 'Generating: $@'
 	@rm -f $@
 	@mkdir -p $(dir $@)
 	$(hide) echo -n > $@
-	$(hide) $(foreach lib,$^,echo $(patsubst %.vendor,%,$(lib)).so $(ALL_MODULES.$(lib).PATH) >> $@;)
+	$(hide) $(foreach lib,$(PRIVATE_LIBS),echo $(patsubst %.vendor,%,$(lib)).so $(ALL_MODULES.$(lib).PATH) >> $@;)
 
 
 vndk_snapshot_configs := \
@@ -142,8 +119,10 @@
 # vndk_snapshot_zip
 vndk_snapshot_variant := $(vndk_snapshot_out)/$(TARGET_ARCH)
 binder :=
-ifneq ($(TARGET_USES_64_BIT_BINDER), true)
-  binder := binder32
+ifneq ($(TARGET_IS_64_BIT), true)
+  ifneq ($(TARGET_USES_64_BIT_BINDER), true)
+    binder := binder32
+  endif
 endif
 vndk_lib_dir := $(subst $(space),/,$(strip $(vndk_snapshot_variant) $(binder) arch-$(TARGET_ARCH)-$(TARGET_ARCH_VARIANT)))
 vndk_lib_dir_2nd := $(subst $(space),/,$(strip $(vndk_snapshot_variant) $(binder) arch-$(TARGET_2ND_ARCH)-$(TARGET_2ND_ARCH_VARIANT)))
@@ -151,70 +130,76 @@
 
 $(vndk_snapshot_zip): PRIVATE_VNDK_SNAPSHOT_OUT := $(vndk_snapshot_out)
 
+deps := $(call paths-of-intermediates,$(foreach lib,$(vndk_core_libs),$(lib):$(subst .vendor,,$(lib)).so))
 $(vndk_snapshot_zip): PRIVATE_VNDK_CORE_OUT := $(vndk_lib_dir)/shared/vndk-core
-$(vndk_snapshot_zip): PRIVATE_VNDK_CORE_INTERMEDIATES := \
-  $(call paths-of-intermediates,$(foreach lib,$(vndk_core_libs),$(lib):$(lib).so),SHARED_LIBRARIES)
+$(vndk_snapshot_zip): PRIVATE_VNDK_CORE_INTERMEDIATES := $(deps)
+$(vndk_snapshot_zip): $(foreach d,$(deps),$(call word-colon,1,$(d)))
+deps :=
 
+deps := $(call paths-of-intermediates,$(foreach lib,$(vndk_sp_libs),$(lib):$(subst .vendor,,$(lib)).so))
 $(vndk_snapshot_zip): PRIVATE_VNDK_SP_OUT := $(vndk_lib_dir)/shared/vndk-sp
-$(vndk_snapshot_zip): PRIVATE_VNDK_SP_INTERMEDIATES := \
-  $(call paths-of-intermediates,$(foreach lib,$(vndk_sp_libs),$(lib):$(lib).so),SHARED_LIBRARIES)
+$(vndk_snapshot_zip): PRIVATE_VNDK_SP_INTERMEDIATES := $(deps)
+$(vndk_snapshot_zip): $(foreach d,$(deps),$(call word-colon,1,$(d)))
+deps :=
 
+deps := $(call paths-of-intermediates,$(foreach txt,$(vndk_prebuilt_txts), \
+          $(txt):$(patsubst %.txt,%.$(PLATFORM_VNDK_VERSION).txt,$(txt)))) \
+        $(foreach config,$(vndk_snapshot_configs),$(config):$(notdir $(config)))
 $(vndk_snapshot_zip): PRIVATE_CONFIGS_OUT := $(vndk_snapshot_variant)/configs
-$(vndk_snapshot_zip): PRIVATE_CONFIGS_INTERMEDIATES := \
-  $(call paths-of-intermediates,$(foreach txt,$(vndk_prebuilt_txts), \
-    $(txt):$(patsubst %.txt,%.$(PLATFORM_VNDK_VERSION).txt,$(txt))),ETC) \
-  $(vndk_snapshot_configs)
+$(vndk_snapshot_zip): PRIVATE_CONFIGS_INTERMEDIATES := $(deps)
+$(vndk_snapshot_zip): $(foreach d,$(deps),$(call word-colon,1,$(d)))
+deps :=
 
+notices := $(call paths-of-notice-files,$(vndk_core_libs) $(vndk_sp_libs))
 $(vndk_snapshot_zip): PRIVATE_NOTICE_FILES_OUT := $(vndk_snapshot_variant)/NOTICE_FILES
-$(vndk_snapshot_zip): PRIVATE_NOTICE_FILES_INTERMEDIATES := \
-  $(call paths-of-notice-files,$(vndk_core_libs),vndk) \
-  $(call paths-of-notice-files,$(vndk_sp_libs),vndk-sp)
+$(vndk_snapshot_zip): PRIVATE_NOTICE_FILES_INTERMEDIATES := $(notices)
+$(vndk_snapshot_zip): $(foreach n,$(notices),$(call word-colon,1,$(n)))
+notices :=
 
 ifdef TARGET_2ND_ARCH
+deps := $(call paths-of-intermediates,$(foreach lib,$(vndk_core_libs),$(lib):$(subst .vendor,,$(lib)).so),true)
 $(vndk_snapshot_zip): PRIVATE_VNDK_CORE_OUT_2ND := $(vndk_lib_dir_2nd)/shared/vndk-core
-$(vndk_snapshot_zip): PRIVATE_VNDK_CORE_INTERMEDIATES_2ND := \
-  $(call paths-of-intermediates,$(foreach lib,$(vndk_core_libs),$(lib):$(lib).so),SHARED_LIBRARIES,true)
+$(vndk_snapshot_zip): PRIVATE_VNDK_CORE_INTERMEDIATES_2ND := $(deps)
+$(vndk_snapshot_zip): $(foreach d,$(deps),$(call word-colon,1,$(d)))
+deps :=
 
+deps := $(call paths-of-intermediates,$(foreach lib,$(vndk_sp_libs),$(lib):$(subst .vendor,,$(lib)).so),true)
 $(vndk_snapshot_zip): PRIVATE_VNDK_SP_OUT_2ND := $(vndk_lib_dir_2nd)/shared/vndk-sp
-$(vndk_snapshot_zip): PRIVATE_VNDK_SP_INTERMEDIATES_2ND := \
-  $(call paths-of-intermediates,$(foreach lib,$(vndk_sp_libs),$(lib):$(lib).so),SHARED_LIBRARIES,true)
+$(vndk_snapshot_zip): PRIVATE_VNDK_SP_INTERMEDIATES_2ND := $(deps)
+$(vndk_snapshot_zip): $(foreach d,$(deps),$(call word-colon,1,$(d)))
+deps :=
 endif
 
 # Args
 #   $(1): destination directory
-#   $(2): list of files to copy
-$(vndk_snapshot_zip): private-copy-vndk-intermediates = \
+#   $(2): list of files (src:dest) to copy
+$(vndk_snapshot_zip): private-copy-intermediates = \
   $(if $(2),$(strip \
-    @mkdir -p $(1); \
+    @mkdir -p $(1) && \
     $(foreach file,$(2), \
-      if [ -e $(file) ]; then \
-        cp -p $(file) $(call append-path,$(1),$(subst .vendor,,$(notdir $(file)))); \
-      fi; \
+      cp $(call word-colon,1,$(file)) $(call append-path,$(1),$(call word-colon,2,$(file))) && \
     ) \
+    true \
   ))
 
-vndk_snapshot_dependencies := \
-  $(vndk_snapshot_libs) \
-  $(vndk_prebuilt_txts) \
-  $(vndk_snapshot_configs)
 
-$(vndk_snapshot_zip): $(vndk_snapshot_dependencies) $(SOONG_ZIP)
+$(vndk_snapshot_zip): $(SOONG_ZIP)
 	@echo 'Generating VNDK snapshot: $@'
 	@rm -f $@
 	@rm -rf $(PRIVATE_VNDK_SNAPSHOT_OUT)
 	@mkdir -p $(PRIVATE_VNDK_SNAPSHOT_OUT)
-	$(call private-copy-vndk-intermediates, \
+	$(call private-copy-intermediates, \
 		$(PRIVATE_VNDK_CORE_OUT),$(PRIVATE_VNDK_CORE_INTERMEDIATES))
-	$(call private-copy-vndk-intermediates, \
+	$(call private-copy-intermediates, \
 		$(PRIVATE_VNDK_SP_OUT),$(PRIVATE_VNDK_SP_INTERMEDIATES))
-	$(call private-copy-vndk-intermediates, \
+	$(call private-copy-intermediates, \
 		$(PRIVATE_CONFIGS_OUT),$(PRIVATE_CONFIGS_INTERMEDIATES))
-	$(call private-copy-vndk-intermediates, \
+	$(call private-copy-intermediates, \
 		$(PRIVATE_NOTICE_FILES_OUT),$(PRIVATE_NOTICE_FILES_INTERMEDIATES))
 ifdef TARGET_2ND_ARCH
-	$(call private-copy-vndk-intermediates, \
+	$(call private-copy-intermediates, \
 		$(PRIVATE_VNDK_CORE_OUT_2ND),$(PRIVATE_VNDK_CORE_INTERMEDIATES_2ND))
-	$(call private-copy-vndk-intermediates, \
+	$(call private-copy-intermediates, \
 		$(PRIVATE_VNDK_SP_OUT_2ND),$(PRIVATE_VNDK_SP_INTERMEDIATES_2ND))
 endif
 	$(hide) $(SOONG_ZIP) -o $@ -C $(PRIVATE_VNDK_SNAPSHOT_OUT) -D $(PRIVATE_VNDK_SNAPSHOT_OUT)
@@ -240,7 +225,6 @@
 binder :=
 vndk_lib_dir :=
 vndk_lib_dir_2nd :=
-vndk_snapshot_dependencies :=
 
 else # BOARD_VNDK_RUNTIME_DISABLE is set to 'true'
 error_msg := "CANNOT generate VNDK snapshot. BOARD_VNDK_RUNTIME_DISABLE must not be set to 'true'."
diff --git a/core/use_lld_setup.mk b/core/use_lld_setup.mk
new file mode 100644
index 0000000..2026f31
--- /dev/null
+++ b/core/use_lld_setup.mk
@@ -0,0 +1,24 @@
+#############################################################
+## Set up flags based on LOCAL_USE_CLANG_LLD.
+## Input variables: LOCAL_USE_CLANG_LLD
+## Output variables: my_use_clang_lld
+#############################################################
+
+# Use LLD by default.
+# Do not use LLD if LOCAL_USE_CLANG_LLD is false or 0
+my_use_clang_lld := true
+ifneq (,$(LOCAL_USE_CLANG_LLD))
+  ifneq (,$(filter 0 false,$(LOCAL_USE_CLANG_LLD)))
+    my_use_clang_lld := false
+  endif
+endif
+
+# Do not use LLD for Darwin host executables or shared libraries.  See
+# https://lld.llvm.org/AtomLLD.html for status of lld for Mach-O.
+ifeq ($($(my_prefix)OS),darwin)
+my_use_clang_lld := false
+endif
+# http://b/110800681 - lld cannot link Android's Windows modules yet.
+ifeq ($($(my_prefix)OS),windows)
+my_use_clang_lld := false
+endif
diff --git a/core/verify_uses_libraries.sh b/core/verify_uses_libraries.sh
index 8135be6..dde0447 100755
--- a/core/verify_uses_libraries.sh
+++ b/core/verify_uses_libraries.sh
@@ -15,11 +15,13 @@
 # limitations under the License.
 
 
+# apt_binary is $(AAPT) in the build.
+
 # Parse sdk, targetSdk, and uses librares in the APK, then cross reference against build specified ones.
 
 set -e
 local_apk=$1
-badging=$(aapt dump badging "${local_apk}")
+badging=$(${aapt_binary} dump badging "${local_apk}")
 export sdk_version=$(echo "${badging}" | grep "sdkVersion" | sed -n "s/sdkVersion:'\(.*\)'/\1/p")
 # Export target_sdk_version to the caller.
 export target_sdk_version=$(echo "${badging}" | grep "targetSdkVersion" | sed -n "s/targetSdkVersion:'\(.*\)'/\1/p")
diff --git a/core/version_defaults.mk b/core/version_defaults.mk
index f837260..0fd40db 100644
--- a/core/version_defaults.mk
+++ b/core/version_defaults.mk
@@ -39,9 +39,9 @@
   include $(INTERNAL_BUILD_ID_MAKEFILE)
 endif
 
-DEFAULT_PLATFORM_VERSION := PPR1
-MIN_PLATFORM_VERSION := PPR1
-MAX_PLATFORM_VERSION := PPR1
+DEFAULT_PLATFORM_VERSION := QPR1
+MIN_PLATFORM_VERSION := QPR1
+MAX_PLATFORM_VERSION := QPR1
 
 ALLOWED_VERSIONS := $(call allowed-platform-versions,\
   $(MIN_PLATFORM_VERSION),\
@@ -56,6 +56,13 @@
   $(warning Invalid TARGET_PLATFORM_VERSION '$(TARGET_PLATFORM_VERSION)', must be one of)
   $(error $(ALLOWED_VERSIONS))
 endif
+ALLOWED_VERSIONS :=
+MIN_PLATFORM_VERSION :=
+MAX_PLATFORM_VERSION :=
+
+.KATI_READONLY := \
+  DEFAULT_PLATFORM_VERSION \
+  TARGET_PLATFORM_VERSION
 
 # Default versions for each TARGET_PLATFORM_VERSION
 # TODO: PLATFORM_VERSION, PLATFORM_SDK_VERSION, etc. should be conditional
@@ -75,11 +82,11 @@
 # please add that PLATFORM_VERSION as well as clean up obsolete PLATFORM_VERSION's
 # in the following text file:
 # cts/tests/tests/os/assets/platform_versions.txt
-PLATFORM_VERSION.PPR1 := 9
+PLATFORM_VERSION.QPR1 := Q
 
 # These are the current development codenames, if the build is not a final
 # release build.  If this is a final release build, it is simply "REL".
-PLATFORM_VERSION_CODENAME.PPR1 := REL
+PLATFORM_VERSION_CODENAME.QPR1 := Q
 
 ifndef PLATFORM_VERSION
   PLATFORM_VERSION := $(PLATFORM_VERSION.$(TARGET_PLATFORM_VERSION))
@@ -88,6 +95,7 @@
     PLATFORM_VERSION := $(TARGET_PLATFORM_VERSION)
   endif
 endif
+.KATI_READONLY := PLATFORM_VERSION
 
 ifndef PLATFORM_SDK_VERSION
   # This is the canonical definition of the SDK version, which defines
@@ -108,6 +116,7 @@
   # cts/tests/tests/os/assets/platform_versions.txt
   PLATFORM_SDK_VERSION := 28
 endif
+.KATI_READONLY := PLATFORM_SDK_VERSION
 
 ifndef PLATFORM_VERSION_CODENAME
   PLATFORM_VERSION_CODENAME := $(PLATFORM_VERSION_CODENAME.$(TARGET_PLATFORM_VERSION))
@@ -153,6 +162,10 @@
     $(subst $(space),$(comma),$(strip $(PLATFORM_VERSION_FUTURE_CODENAMES)))
 
 endif
+.KATI_READONLY := \
+  PLATFORM_VERSION_CODENAME \
+  PLATFORM_VERSION_ALL_CODENAMES \
+  PLATFORM_VERSION_FUTURE_CODENAMES
 
 ifeq (REL,$(PLATFORM_VERSION_CODENAME))
   PLATFORM_PREVIEW_SDK_VERSION := 0
@@ -166,10 +179,14 @@
     # SDK version the package was built for, otherwise it should fall back to
     # assuming the device can only support APIs as of the previous official
     # public release.
-    # This value will always be 0 for release builds.
-    PLATFORM_PREVIEW_SDK_VERSION := 0
+    # This value will always be forced to 0 for release builds by the logic
+    # in the "ifeq" block above, so the value below will be used on any
+    # non-release builds, and it should always be at least 1, to indicate that
+    # APIs may have changed since the claimed PLATFORM_SDK_VERSION.
+    PLATFORM_PREVIEW_SDK_VERSION := 1
   endif
 endif
+.KATI_READONLY := PLATFORM_PREVIEW_SDK_VERSION
 
 ifndef DEFAULT_APP_TARGET_SDK
   # This is the default minSdkVersion and targetSdkVersion to use for
@@ -183,6 +200,7 @@
     DEFAULT_APP_TARGET_SDK := $(PLATFORM_VERSION_CODENAME)
   endif
 endif
+.KATI_READONLY := DEFAULT_APP_TARGET_SDK
 
 ifndef PLATFORM_VNDK_VERSION
   # This is the definition of the VNDK version for the current VNDK libraries.
@@ -201,6 +219,7 @@
     PLATFORM_VNDK_VERSION := $(PLATFORM_VERSION_CODENAME)
   endif
 endif
+.KATI_READONLY := PLATFORM_VNDK_VERSION
 
 ifndef PLATFORM_SYSTEMSDK_MIN_VERSION
   # This is the oldest version of system SDK that the platform supports. Contrary
@@ -209,6 +228,7 @@
   # old system APIs are gradually deprecated, removed and then deleted.
   PLATFORM_SYSTEMSDK_MIN_VERSION := 28
 endif
+.KATI_READONLY := PLATFORM_SYSTEMSDK_MIN_VERSION
 
 # This is the list of system SDK versions that the current platform supports.
 PLATFORM_SYSTEMSDK_VERSIONS :=
@@ -224,6 +244,7 @@
   PLATFORM_SYSTEMSDK_VERSIONS += $(PLATFORM_VERSION_CODENAME)
 endif
 PLATFORM_SYSTEMSDK_VERSIONS := $(strip $(sort $(PLATFORM_SYSTEMSDK_VERSIONS)))
+.KATI_READONLY := PLATFORM_SYSTEMSDK_VERSIONS
 
 ifndef PLATFORM_SECURITY_PATCH
     #  Used to indicate the security patch that has been applied to the device.
@@ -233,6 +254,7 @@
     #  If there is no $PLATFORM_SECURITY_PATCH set, keep it empty.
       PLATFORM_SECURITY_PATCH := 2018-12-05
 endif
+.KATI_READONLY := PLATFORM_SECURITY_PATCH
 
 ifndef PLATFORM_SECURITY_PATCH_TIMESTAMP
   # Used to indicate the matching timestamp for the security patch string in PLATFORM_SECURITY_PATCH.
@@ -251,6 +273,7 @@
   # If there is no $PLATFORM_BASE_OS set, keep it empty.
   PLATFORM_BASE_OS :=
 endif
+.KATI_READONLY := PLATFORM_BASE_OS
 
 ifndef BUILD_ID
   # Used to signify special builds.  E.g., branches and/or releases,
@@ -260,6 +283,7 @@
   # If there is no BUILD_ID set, make it obvious.
   BUILD_ID := UNKNOWN
 endif
+.KATI_READONLY := BUILD_ID
 
 ifndef BUILD_DATETIME
   # Used to reproduce builds by setting the same time. Must be the number
@@ -272,11 +296,12 @@
 else
 DATE := date -d @$(BUILD_DATETIME)
 endif
+.KATI_READONLY := DATE
 
 # Everything should be using BUILD_DATETIME_FROM_FILE instead.
 # BUILD_DATETIME and DATE can be removed once BUILD_NUMBER moves
 # to soong_ui.
-BUILD_DATETIME :=
+$(KATI_obsolete_var BUILD_DATETIME,Use BUILD_DATETIME_FROM_FILE)
 
 HAS_BUILD_NUMBER := true
 ifndef BUILD_NUMBER
@@ -292,10 +317,12 @@
   BUILD_NUMBER := eng.$(shell echo $${USER:0:6}).$(shell $(DATE) +%Y%m%d.%H%M%S)
   HAS_BUILD_NUMBER := false
 endif
+.KATI_READONLY := BUILD_NUMBER HAS_BUILD_NUMBER
 
 ifndef PLATFORM_MIN_SUPPORTED_TARGET_SDK_VERSION
   # Used to set minimum supported target sdk version. Apps targeting sdk
-  # version lower than the set value will fail to install and run on android
-  # device.
-  PLATFORM_MIN_SUPPORTED_TARGET_SDK_VERSION := 17
+  # version lower than the set value will result in a warning being shown
+  # when any activity from the app is started.
+  PLATFORM_MIN_SUPPORTED_TARGET_SDK_VERSION := 23
 endif
+.KATI_READONLY := PLATFORM_MIN_SUPPORTED_TARGET_SDK_VERSION
diff --git a/envsetup.sh b/envsetup.sh
index cf61950..561083d 100644
--- a/envsetup.sh
+++ b/envsetup.sh
@@ -4,28 +4,31 @@
 Run "m help" for help with the build system itself.
 
 Invoke ". build/envsetup.sh" from your shell to add the following functions to your environment:
-- lunch:     lunch <product_name>-<build_variant>
-             Selects <product_name> as the product to build, and <build_variant> as the variant to
-             build, and stores those selections in the environment to be read by subsequent
-             invocations of 'm' etc.
-- tapas:     tapas [<App1> <App2> ...] [arm|x86|mips|arm64|x86_64|mips64] [eng|userdebug|user]
-- croot:     Changes directory to the top of the tree.
-- m:         Makes from the top of the tree.
-- mm:        Builds all of the modules in the current directory, but not their dependencies.
-- mmm:       Builds all of the modules in the supplied directories, but not their dependencies.
-             To limit the modules being built use the syntax: mmm dir/:target1,target2.
-- mma:       Builds all of the modules in the current directory, and their dependencies.
-- mmma:      Builds all of the modules in the supplied directories, and their dependencies.
-- provision: Flash device with all required partitions. Options will be passed on to fastboot.
-- cgrep:     Greps on all local C/C++ files.
-- ggrep:     Greps on all local Gradle files.
-- jgrep:     Greps on all local Java files.
-- resgrep:   Greps on all local res/*.xml files.
-- mangrep:   Greps on all local AndroidManifest.xml files.
-- mgrep:     Greps on all local Makefiles files.
-- sepgrep:   Greps on all local sepolicy files.
-- sgrep:     Greps on all local source files.
-- godir:     Go to the directory containing a file.
+- lunch:      lunch <product_name>-<build_variant>
+              Selects <product_name> as the product to build, and <build_variant> as the variant to
+              build, and stores those selections in the environment to be read by subsequent
+              invocations of 'm' etc.
+- tapas:      tapas [<App1> <App2> ...] [arm|x86|mips|arm64|x86_64|mips64] [eng|userdebug|user]
+- croot:      Changes directory to the top of the tree.
+- m:          Makes from the top of the tree.
+- mm:         Builds all of the modules in the current directory, but not their dependencies.
+- mmm:        Builds all of the modules in the supplied directories, but not their dependencies.
+              To limit the modules being built use the syntax: mmm dir/:target1,target2.
+- mma:        Builds all of the modules in the current directory, and their dependencies.
+- mmma:       Builds all of the modules in the supplied directories, and their dependencies.
+- provision:  Flash device with all required partitions. Options will be passed on to fastboot.
+- cgrep:      Greps on all local C/C++ files.
+- ggrep:      Greps on all local Gradle files.
+- jgrep:      Greps on all local Java files.
+- resgrep:    Greps on all local res/*.xml files.
+- mangrep:    Greps on all local AndroidManifest.xml files.
+- mgrep:      Greps on all local Makefiles files.
+- sepgrep:    Greps on all local sepolicy files.
+- sgrep:      Greps on all local source files.
+- godir:      Go to the directory containing a file.
+- allmod:     List all modules.
+- gomod:      Go to the directory containing a module.
+- refreshmod: Refresh list of modules for allmod/gomod.
 
 Environment options:
 - SANITIZE_HOST: Set to 'true' to use ASAN for all host modules. Note that
@@ -48,12 +51,12 @@
 {
     local T=$(gettop)
     # Grep out the variable names from the script.
-    cached_vars=`cat $T/build/envsetup.sh | tr '()' '  ' | awk '{for(i=1;i<=NF;i++) if($i~/get_build_var/) print $(i+1)}' | sort -u | tr '\n' ' '`
-    cached_abs_vars=`cat $T/build/envsetup.sh | tr '()' '  ' | awk '{for(i=1;i<=NF;i++) if($i~/get_abs_build_var/) print $(i+1)}' | sort -u | tr '\n' ' '`
+    cached_vars=(`cat $T/build/envsetup.sh | tr '()' '  ' | awk '{for(i=1;i<=NF;i++) if($i~/get_build_var/) print $(i+1)}' | sort -u | tr '\n' ' '`)
+    cached_abs_vars=(`cat $T/build/envsetup.sh | tr '()' '  ' | awk '{for(i=1;i<=NF;i++) if($i~/get_abs_build_var/) print $(i+1)}' | sort -u | tr '\n' ' '`)
     # Call the build system to dump the "<val>=<value>" pairs as a shell script.
     build_dicts_script=`\builtin cd $T; build/soong/soong_ui.bash --dumpvars-mode \
-                        --vars="$cached_vars" \
-                        --abs-vars="$cached_abs_vars" \
+                        --vars="${cached_vars[*]}" \
+                        --abs-vars="${cached_abs_vars[*]}" \
                         --var-prefix=var_cache_ \
                         --abs-var-prefix=abs_var_cache_`
     local ret=$?
@@ -301,7 +304,6 @@
 
 function set_stuff_for_environment()
 {
-    settitle
     setpaths
     set_sequence_number
 
@@ -316,49 +318,53 @@
     export BUILD_ENV_SEQUENCE_NUMBER=13
 }
 
-function settitle()
-{
-    # This used to be opt-out with STAY_OFF_MY_LAWN, but this breaks folks
-    # actually using PROMPT_COMMAND (https://issuetracker.google.com/38402256),
-    # and the attempt to set the title doesn't do anything for the default
-    # window manager in debian right now, so switch it to opt-in for anyone
-    # who actually wants this.
-    if [ "$ANDROID_BUILD_SET_WINDOW_TITLE" = "true" ]; then
-        local arch=$(gettargetarch)
-        local product=$TARGET_PRODUCT
-        local variant=$TARGET_BUILD_VARIANT
-        local apps=$TARGET_BUILD_APPS
-        if [ -z "$apps" ]; then
-            export PROMPT_COMMAND="echo -ne \"\033]0;[${arch}-${product}-${variant}] ${USER}@${HOSTNAME}: ${PWD}\007\""
-        else
-            export PROMPT_COMMAND="echo -ne \"\033]0;[$arch $apps $variant] ${USER}@${HOSTNAME}: ${PWD}\007\""
-        fi
-    fi
+# Takes a command name, and check if it's in ENVSETUP_NO_COMPLETION or not.
+function should_add_completion() {
+    local cmd="$(basename $1| sed 's/_completion//' |sed 's/\.\(.*\)*sh$//')"
+    case :"$ENVSETUP_NO_COMPLETION": in
+        *:"$cmd":*)
+            return 1
+            ;;
+    esac
+    return 0
 }
 
 function addcompletions()
 {
     local T dir f
 
-    # Keep us from trying to run in something that isn't bash.
-    if [ -z "${BASH_VERSION}" ]; then
+    # Keep us from trying to run in something that's neither bash nor zsh.
+    if [ -z "$BASH_VERSION" -a -z "$ZSH_VERSION" ]; then
         return
     fi
 
     # Keep us from trying to run in bash that's too old.
-    if [ ${BASH_VERSINFO[0]} -lt 3 ]; then
+    if [ -n "$BASH_VERSION" -a ${BASH_VERSINFO[0]} -lt 3 ]; then
         return
     fi
 
-    dir="sdk/bash_completion"
-    if [ -d ${dir} ]; then
-        for f in `/bin/ls ${dir}/[a-z]*.bash 2> /dev/null`; do
-            echo "including $f"
+    local completion_files=(
+      system/core/adb/adb.bash
+      system/core/fastboot/fastboot.bash
+      tools/tradefederation/core/atest/atest_completion.sh
+    )
+    # Completion can be disabled selectively to allow users to use non-standard completion.
+    # e.g.
+    # ENVSETUP_NO_COMPLETION=adb # -> disable adb completion
+    # ENVSETUP_NO_COMPLETION=adb:bit # -> disable adb and bit completion
+    for f in ${completion_files[*]}; do
+        if [ -f "$f" ] && should_add_completion "$f"; then
             . $f
-        done
-    fi
+        fi
+    done
 
-    complete -C "bit --tab" bit
+    if should_add_completion bit ; then
+        complete -C "bit --tab" bit
+    fi
+    complete -F _lunch lunch
+
+    complete -F _complete_android_module_names gomod
+    complete -F _complete_android_module_names m
 }
 
 function choosetype()
@@ -544,14 +550,6 @@
     LUNCH_MENU_CHOICES=(${LUNCH_MENU_CHOICES[@]} $new_combo)
 }
 
-# add the default one here
-add_lunch_combo aosp_arm-eng
-add_lunch_combo aosp_arm64-eng
-add_lunch_combo aosp_mips-eng
-add_lunch_combo aosp_mips64-eng
-add_lunch_combo aosp_x86-eng
-add_lunch_combo aosp_x86_64-eng
-
 function print_lunch_menu()
 {
     local uname=$(uname)
@@ -562,7 +560,7 @@
 
     local i=1
     local choice
-    for choice in ${LUNCH_MENU_CHOICES[@]}
+    for choice in $(TARGET_BUILD_APPS= LUNCH_MENU_CHOICES="${LUNCH_MENU_CHOICES[@]}" get_build_var COMMON_LUNCH_CHOICES)
     do
         echo "     $i. $choice"
         i=$(($i+1))
@@ -590,9 +588,16 @@
         selection=aosp_arm-eng
     elif (echo -n $answer | grep -q -e "^[0-9][0-9]*$")
     then
-        if [ $answer -le ${#LUNCH_MENU_CHOICES[@]} ]
+        local choices=($(TARGET_BUILD_APPS= LUNCH_MENU_CHOICES="${LUNCH_MENU_CHOICES[@]}" get_build_var COMMON_LUNCH_CHOICES))
+        if [ $answer -le ${#choices[@]} ]
         then
-            selection=${LUNCH_MENU_CHOICES[$(($answer-1))]}
+            # array in zsh starts from 1 instead of 0.
+            if [ -n "$ZSH_VERSION" ]
+            then
+                selection=${choices[$(($answer))]}
+            else
+                selection=${choices[$(($answer-1))]}
+            fi
         fi
     else
         selection=$answer
@@ -643,6 +648,7 @@
     destroy_build_var_cache
 }
 
+unset COMMON_LUNCH_CHOICES_CACHE
 # Tab completion for lunch.
 function _lunch()
 {
@@ -651,10 +657,13 @@
     cur="${COMP_WORDS[COMP_CWORD]}"
     prev="${COMP_WORDS[COMP_CWORD-1]}"
 
-    COMPREPLY=( $(compgen -W "${LUNCH_MENU_CHOICES[*]}" -- ${cur}) )
+    if [ -z "$COMMON_LUNCH_CHOICES_CACHE" ]; then
+        COMMON_LUNCH_CHOICES_CACHE=$(TARGET_BUILD_APPS= LUNCH_MENU_CHOICES="${LUNCH_MENU_CHOICES[@]}" get_build_var COMMON_LUNCH_CHOICES)
+    fi
+
+    COMPREPLY=( $(compgen -W "${COMMON_LUNCH_CHOICES_CACHE}" -- ${cur}) )
     return 0
 }
-complete -F _lunch lunch
 
 # Configures the build to build unbundled apps.
 # Run tapas with one or more app names (from LOCAL_PACKAGE_NAME)
@@ -767,6 +776,7 @@
         \cd ..
     done
     \cd $HERE
+    return 1
 }
 
 function mm()
@@ -894,7 +904,7 @@
       echo "Couldn't locate the top of the tree.  Try setting TOP."
       return 1
     fi
-    local M=$(findmakefile)
+    local M=$(findmakefile || echo $(realpath $PWD)/Android.mk)
     # Remove the path to top as the makefilepath needs to be relative
     local M=`echo $M|sed 's:'$T'/::'`
     local MODULES_IN_PATHS=MODULES-IN-$(dirname ${M})
@@ -999,28 +1009,6 @@
     fi
 }
 
-function pid()
-{
-    local prepend=''
-    local append=''
-    if [ "$1" = "--exact" ]; then
-        prepend=' '
-        append='$'
-        shift
-    fi
-    local EXE="$1"
-    if [ "$EXE" ] ; then
-        local PID=`adb shell ps \
-            | tr -d '\r' \
-            | \grep "$prepend$EXE$append" \
-            | sed -e 's/^[^ ]* *\([0-9]*\).*$/\1/'`
-        echo "$PID"
-    else
-        echo "usage: pid [--exact] <process name>"
-        return 255
-    fi
-}
-
 # coredump_setup - enable core dumps globally for any process
 #                  that has the core-file-size limit set correctly
 #
@@ -1107,60 +1095,13 @@
     stacks system_server
 }
 
-function stacks()
-{
-    if [[ $1 =~ ^[0-9]+$ ]] ; then
-        local PID="$1"
-    elif [ "$1" ] ; then
-        local PIDLIST="$(pid $1)"
-        if [[ $PIDLIST =~ ^[0-9]+$ ]] ; then
-            local PID="$PIDLIST"
-        elif [ "$PIDLIST" ] ; then
-            echo "more than one process: $1"
-        else
-            echo "no such process: $1"
-        fi
-    else
-        echo "usage: stacks [pid|process name]"
-    fi
-
-    if [ "$PID" ] ; then
-        # Determine whether the process is native
-        if adb shell ls -l /proc/$PID/exe | grep -q /system/bin/app_process ; then
-            # Dump stacks of Dalvik process
-            local TRACES=/data/anr/traces.txt
-            local ORIG=/data/anr/traces.orig
-            local TMP=/data/anr/traces.tmp
-
-            # Keep original traces to avoid clobbering
-            adb shell mv $TRACES $ORIG
-
-            # Make sure we have a usable file
-            adb shell touch $TRACES
-            adb shell chmod 666 $TRACES
-
-            # Dump stacks and wait for dump to finish
-            adb shell kill -3 $PID
-            adb shell notify $TRACES >/dev/null
-
-            # Restore original stacks, and show current output
-            adb shell mv $TRACES $TMP
-            adb shell mv $ORIG $TRACES
-            adb shell cat $TMP
-        else
-            # Dump stacks of native process
-            adb shell debuggerd -b $PID
-        fi
-    fi
-}
-
 # Read the ELF header from /proc/$PID/exe to determine if the process is
 # 64-bit.
 function is64bit()
 {
     local PID="$1"
     if [ "$PID" ] ; then
-        if [[ "$(adb shell cat /proc/$PID/exe | xxd -l 1 -s 4 -ps)" -eq "02" ]] ; then
+        if [[ "$(adb shell cat /proc/$PID/exe | xxd -l 1 -s 4 -p)" -eq "02" ]] ; then
             echo "64"
         else
             echo ""
@@ -1174,7 +1115,7 @@
     Darwin)
         function sgrep()
         {
-            find -E . -name .repo -prune -o -name .git -prune -o  -type f -iregex '.*\.(c|h|cc|cpp|S|java|xml|sh|mk|aidl|vts)' \
+            find -E . -name .repo -prune -o -name .git -prune -o  -type f -iregex '.*\.(c|h|cc|cpp|hpp|S|java|xml|sh|mk|aidl|vts)' \
                 -exec grep --color -n "$@" {} +
         }
 
@@ -1182,7 +1123,7 @@
     *)
         function sgrep()
         {
-            find . -name .repo -prune -o -name .git -prune -o  -type f -iregex '.*\.\(c\|h\|cc\|cpp\|S\|java\|xml\|sh\|mk\|aidl\|vts\)' \
+            find . -name .repo -prune -o -name .git -prune -o  -type f -iregex '.*\.\(c\|h\|cc\|cpp\|hpp\|S\|java\|xml\|sh\|mk\|aidl\|vts\)' \
                 -exec grep --color -n "$@" {} +
         }
         ;;
@@ -1247,7 +1188,7 @@
 
         function treegrep()
         {
-            find -E . -name .repo -prune -o -name .git -prune -o -type f -iregex '.*\.(c|h|cpp|S|java|xml)' \
+            find -E . -name .repo -prune -o -name .git -prune -o -type f -iregex '.*\.(c|h|cpp|hpp|S|java|xml)' \
                 -exec grep --color -n -i "$@" {} +
         }
 
@@ -1261,7 +1202,7 @@
 
         function treegrep()
         {
-            find . -name .repo -prune -o -name .git -prune -o -regextype posix-egrep -iregex '.*\.(c|h|cpp|S|java|xml)' -type f \
+            find . -name .repo -prune -o -name .git -prune -o -regextype posix-egrep -iregex '.*\.(c|h|cpp|hpp|S|java|xml)' -type f \
                 -exec grep --color -n -i "$@" {} +
         }
 
@@ -1528,6 +1469,77 @@
     \cd $T/$pathname
 }
 
+# Update module-info.json in out.
+function refreshmod() {
+    if [ ! "$ANDROID_PRODUCT_OUT" ]; then
+        echo "No ANDROID_PRODUCT_OUT. Try running 'lunch' first." >&2
+        return 1
+    fi
+
+    echo "Refreshing modules (building module-info.json). Log at $ANDROID_PRODUCT_OUT/module-info.json.build.log." >&2
+
+    # for the output of the next command
+    mkdir -p $ANDROID_PRODUCT_OUT || return 1
+
+    # Note, can't use absolute path because of the way make works.
+    m out/target/product/$(get_build_var TARGET_DEVICE)/module-info.json \
+        > $ANDROID_PRODUCT_OUT/module-info.json.build.log 2>&1
+}
+
+# List all modules for the current device, as cached in module-info.json. If any build change is
+# made and it should be reflected in the output, you should run 'refreshmod' first.
+function allmod() {
+    if [ ! "$ANDROID_PRODUCT_OUT" ]; then
+        echo "No ANDROID_PRODUCT_OUT. Try running 'lunch' first." >&2
+        return 1
+    fi
+
+    if [ ! -f "$ANDROID_PRODUCT_OUT/module-info.json" ]; then
+        echo "Could not find module-info.json. It will only be built once, and it can be updated with 'refreshmod'" >&2
+        refreshmod || return 1
+    fi
+
+    python -c "import json; print '\n'.join(sorted(json.load(open('$ANDROID_PRODUCT_OUT/module-info.json')).keys()))"
+}
+
+# Go to a specific module in the android tree, as cached in module-info.json. If any build change
+# is made, and it should be reflected in the output, you should run 'refreshmod' first.
+function gomod() {
+    if [ ! "$ANDROID_PRODUCT_OUT" ]; then
+        echo "No ANDROID_PRODUCT_OUT. Try running 'lunch' first." >&2
+        return 1
+    fi
+
+    if [[ $# -ne 1 ]]; then
+        echo "usage: gomod <module>" >&2
+        return 1
+    fi
+
+    if [ ! -f "$ANDROID_PRODUCT_OUT/module-info.json" ]; then
+        echo "Could not find module-info.json. It will only be built once, and it can be updated with 'refreshmod'" >&2
+        refreshmod || return 1
+    fi
+
+    local relpath=$(python -c "import json, os
+module = '$1'
+module_info = json.load(open('$ANDROID_PRODUCT_OUT/module-info.json'))
+if module not in module_info:
+    exit(1)
+print module_info[module]['path'][0]" 2>/dev/null)
+
+    if [ -z "$relpath" ]; then
+        echo "Could not find module '$1' (try 'refreshmod' if there have been build changes?)." >&2
+        return 1
+    else
+        cd $ANDROID_BUILD_TOP/$relpath
+    fi
+}
+
+function _complete_android_module_names() {
+    local word=${COMP_WORDS[COMP_CWORD]}
+    COMPREPLY=( $(allmod | grep -E "^$word") )
+}
+
 # Print colored exit condition
 function pez {
     "$@"
@@ -1632,30 +1644,87 @@
 
 function atest()
 {
-    # TODO (sbasi): Replace this to be a destination in the build out when & if
-    # atest is built by the build system. (This will be necessary if it ever
-    # depends on external pip projects).
-    "$(gettop)"/tools/tradefederation/core/atest/atest.py "$@"
+    # Let's use the built version over the prebuilt, then source code.
+    local os_arch=$(get_build_var HOST_PREBUILT_TAG)
+    local built_atest=${ANDROID_HOST_OUT}/bin/atest
+    local prebuilt_atest="$(gettop)"/prebuilts/asuite/atest/$os_arch/atest
+    if [[ -x $built_atest ]]; then
+        $built_atest "$@"
+    elif [[ -x $prebuilt_atest ]]; then
+        $prebuilt_atest "$@"
+    else
+        # TODO: once prebuilt atest released, remove the source code section
+        # and change the location of atest_completion.sh in addcompletions().
+        "$(gettop)"/tools/tradefederation/core/atest/atest.py "$@"
+    fi
 }
 
-if [ "x$SHELL" != "x/bin/bash" ]; then
-    case `ps -o command -p $$` in
+# Zsh needs bashcompinit called to support bash-style completion.
+function enable_zsh_completion() {
+    # Don't override user's options if bash-style completion is already enabled.
+    if ! declare -f complete >/dev/null; then
+        autoload -U compinit && compinit
+        autoload -U bashcompinit && bashcompinit
+    fi
+}
+
+function validate_current_shell() {
+    local current_sh="$(ps -o command -p $$)"
+    case "$current_sh" in
         *bash*)
+            function check_type() { type -t "$1"; }
             ;;
+        *zsh*)
+            function check_type() { type "$1"; }
+            enable_zsh_completion ;;
         *)
-            echo "WARNING: Only bash is supported, use of other shell would lead to erroneous results"
+            echo -e "WARNING: Only bash and zsh are supported.\nUse of other shell would lead to erroneous results."
             ;;
     esac
-fi
+}
+
+function acloud()
+{
+    # Let's use the built version over the prebuilt.
+    local built_acloud=${ANDROID_HOST_OUT}/bin/acloud
+    if [ -f $built_acloud ]; then
+        $built_acloud "$@"
+        return $?
+    fi
+
+    local host_os_arch=$(get_build_var HOST_PREBUILT_TAG)
+    case $host_os_arch in
+        linux-x86) "$(gettop)"/prebuilts/asuite/acloud/linux-x86/acloud "$@"
+        ;;
+    *)
+        echo "acloud is not supported on your host arch: $host_os_arch"
+        ;;
+    esac
+}
+
+function aidegen()
+{
+    # Always use the prebuilt version.
+    local host_os_arch=$(get_build_var HOST_PREBUILT_TAG)
+    case $host_os_arch in
+        linux-x86) "$(gettop)"/prebuilts/asuite/aidegen/linux-x86/aidegen "$@"
+        ;;
+    *)
+        echo "aidegen is not supported on your host arch: $host_os_arch"
+        ;;
+    esac
+}
 
 # Execute the contents of any vendorsetup.sh files we can find.
-for f in `test -d device && find -L device -maxdepth 4 -name 'vendorsetup.sh' 2> /dev/null | sort` \
-         `test -d vendor && find -L vendor -maxdepth 4 -name 'vendorsetup.sh' 2> /dev/null | sort` \
-         `test -d product && find -L product -maxdepth 4 -name 'vendorsetup.sh' 2> /dev/null | sort`
-do
-    echo "including $f"
-    . $f
-done
-unset f
+function source_vendorsetup() {
+    for dir in device vendor product; do
+        for f in $(test -d $dir && \
+            find -L $dir -maxdepth 4 -name 'vendorsetup.sh' 2>/dev/null | sort); do
+            echo "including $f"; . $f
+        done
+    done
+}
 
+validate_current_shell
+source_vendorsetup
 addcompletions
diff --git a/help.sh b/help.sh
index c143542..be07344 100755
--- a/help.sh
+++ b/help.sh
@@ -40,6 +40,10 @@
                             Stands for "Vendor, NO Dependencies"
     pnod                    Quickly rebuild the product image from built packages
                             Stands for "Product, NO Dependencies"
+    psnod                   Quickly rebuild the product_services image from built packages
+                            Stands for "ProductServices, NO Dependencies"
+    onod                    Quickly rebuild the odm image from built packages
+                            Stands for "ODM, NO Dependencies"
 
 
 So, for example, you could run:
diff --git a/packaging/distdir.mk b/packaging/distdir.mk
new file mode 100644
index 0000000..264a8b0
--- /dev/null
+++ b/packaging/distdir.mk
@@ -0,0 +1,46 @@
+#
+# Copyright (C) 2018 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# From the Android.mk pass:
+DIST_GOAL_OUTPUT_PAIRS :=
+DIST_SRC_DST_PAIRS :=
+include $(KATI_PACKAGE_MK_DIR)/dist.mk
+
+$(foreach pair,$(DIST_GOAL_OUTPUT_PAIRS), \
+  $(eval goal := $(call word-colon,1,$(pair))) \
+  $(eval output := $(call word-colon,2,$(pair))) \
+  $(eval .PHONY: _dist_$$(goal)) \
+  $(if $(call streq,$(DIST),true),\
+    $(eval _dist_$$(goal): $$(DIST_DIR)/$$(output)), \
+    $(eval _dist_$$(goal):)))
+
+define copy-one-dist-file
+$(2): $(1)
+	@echo "Dist: $$@"
+	rm -f $$@
+	cp $$< $$@
+endef
+
+ifeq ($(DIST),true)
+  $(foreach pair,$(DIST_SRC_DST_PAIRS), \
+    $(eval src := $(call word-colon,1,$(pair))) \
+    $(eval dst := $(DIST_DIR)/$(call word-colon,2,$(pair))) \
+    $(eval $(call copy-one-dist-file,$(src),$(dst))))
+endif
+
+copy-one-dist-file :=
+DIST_GOAL_OUTPUT_PAIRS :=
+DIST_SRC_DST_PAIRS :=
diff --git a/packaging/main.mk b/packaging/main.mk
new file mode 100644
index 0000000..0b746a8
--- /dev/null
+++ b/packaging/main.mk
@@ -0,0 +1,37 @@
+#
+# Copyright (C) 2018 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# Create a default rule. This is unused currently, as the real default rule is
+# still in the Kati build step.
+.PHONY: _packaging_default_rule_
+_packaging_default_rule_:
+
+ifndef KATI
+$(error Only Kati is supported.)
+endif
+
+$(info [1/3] initializing packaging system ...)
+
+.KATI_READONLY := KATI_PACKAGE_MK_DIR
+
+include build/make/common/core.mk
+include build/make/common/strings.mk
+
+$(info [2/3] including distdir.mk ...)
+
+include build/make/packaging/distdir.mk
+
+$(info [3/3] writing packaging rules ...)
diff --git a/target/board/BoardConfigEmuCommon.mk b/target/board/BoardConfigEmuCommon.mk
new file mode 100644
index 0000000..38f79fd
--- /dev/null
+++ b/target/board/BoardConfigEmuCommon.mk
@@ -0,0 +1,34 @@
+# BoardConfigEmuCommon.mk
+#
+# Common compile-time definitions for emulator
+#
+
+HAVE_HTC_AUDIO_DRIVER := true
+BOARD_USES_GENERIC_AUDIO := true
+TARGET_BOOTLOADER_BOARD_NAME := goldfish_$(TARGET_ARCH)
+
+# no hardware camera
+USE_CAMERA_STUB := true
+
+NUM_FRAMEBUFFER_SURFACE_BUFFERS := 3
+
+# Build OpenGLES emulation guest and host libraries
+BUILD_EMULATOR_OPENGL := true
+BUILD_QEMU_IMAGES := true
+
+# Build and enable the OpenGL ES View renderer. When running on the emulator,
+# the GLES renderer disables itself if host GL acceleration isn't available.
+USE_OPENGL_RENDERER := true
+
+TARGET_COPY_OUT_VENDOR := vendor
+
+# ~100 MB vendor image. Please adjust system image / vendor image sizes
+# when finalizing them. The partition size needs to be a multiple of image
+# block size: 4096.
+BOARD_VENDORIMAGE_PARTITION_SIZE := 100003840
+BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE := ext4
+BOARD_FLASH_BLOCK_SIZE := 512
+DEVICE_MATRIX_FILE   := device/generic/goldfish/compatibility_matrix.xml
+
+BOARD_SEPOLICY_DIRS += device/generic/goldfish/sepolicy/common
+BOARD_PROPERTY_OVERRIDES_SPLIT_ENABLED := true
diff --git a/target/board/BoardConfigGsiCommon.mk b/target/board/BoardConfigGsiCommon.mk
new file mode 100644
index 0000000..73af020
--- /dev/null
+++ b/target/board/BoardConfigGsiCommon.mk
@@ -0,0 +1,47 @@
+# BoardConfigGsiCommon.mk
+#
+# Common compile-time definitions for GSI
+# Builds upon the mainline config.
+#
+
+include build/make/target/board/BoardConfigMainlineCommon.mk
+
+# This flag is set by mainline but isn't desired for GSI.
+BOARD_USES_SYSTEM_OTHER_ODEX :=
+
+# GSIs are historically released in sparse format.
+# Some vendors' bootloaders don't work properly with raw format images. So
+# we explicit specify this need below (even though it's the current default).
+TARGET_USERIMAGES_SPARSE_EXT_DISABLED := false
+
+# Enable dynamic system image size and reserved 64MB in it.
+BOARD_SYSTEMIMAGE_PARTITION_RESERVED_SIZE := 67108864
+
+# Android Verified Boot (AVB):
+#   Set AVB_VBMETA_IMAGE_FLAGS_VERIFICATION_DISABLED (--flag 2) in
+#   vbmeta.img to disable AVB verification.
+#
+# To disable AVB for GSI, use the vbmeta.img and the GSI together.
+# To enable AVB for GSI, include the GSI public key into the device-specific
+# vbmeta.img.
+BOARD_AVB_MAKE_VBMETA_IMAGE_ARGS += --flag 2
+
+# Enable chain partition for system.
+BOARD_AVB_SYSTEM_KEY_PATH := external/avb/test/data/testkey_rsa2048.pem
+BOARD_AVB_SYSTEM_ALGORITHM := SHA256_RSA2048
+BOARD_AVB_SYSTEM_ROLLBACK_INDEX := $(PLATFORM_SECURITY_PATCH_TIMESTAMP)
+BOARD_AVB_SYSTEM_ROLLBACK_INDEX_LOCATION := 1
+
+ifneq (,$(filter userdebug eng,$(TARGET_BUILD_VARIANT)))
+# GSI is always userdebug and needs a couple of properties taking precedence
+# over those set by the vendor.
+TARGET_SYSTEM_PROP := build/make/target/board/gsi_system.prop
+endif
+
+# Android generic system image always create metadata partition
+BOARD_USES_METADATA_PARTITION := true
+
+# Set this to create /cache mount point for non-A/B devices that mounts /cache.
+# The partition size doesn't matter, just to make build pass.
+BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE := ext4
+BOARD_CACHEIMAGE_PARTITION_SIZE := 16777216
diff --git a/target/board/BoardConfigMainlineCommon.mk b/target/board/BoardConfigMainlineCommon.mk
new file mode 100644
index 0000000..ec3c74f
--- /dev/null
+++ b/target/board/BoardConfigMainlineCommon.mk
@@ -0,0 +1,28 @@
+# BoardConfigMainlineCommon.mk
+#
+# Common compile-time definitions for mainline images.
+
+# The generic product target doesn't have any hardware-specific pieces.
+TARGET_NO_BOOTLOADER := true
+TARGET_NO_KERNEL := true
+
+TARGET_USERIMAGES_USE_EXT4 := true
+
+# system-as-root is mandatory from Android P
+TARGET_NO_RECOVERY := true
+BOARD_BUILD_SYSTEM_ROOT_IMAGE := true
+
+BOARD_VNDK_VERSION := current
+
+# Required flag for non-64 bit devices from P.
+TARGET_USES_64_BIT_BINDER := true
+
+# Puts odex files on system_other, as well as causing dex files not to get
+# stripped from APKs.
+BOARD_USES_SYSTEM_OTHER_ODEX := true
+
+# Audio: must using XML format for Treblized devices
+USE_XML_AUDIO_POLICY_CONF := 1
+
+BOARD_AVB_ENABLE := true
+BOARD_AVB_ROLLBACK_INDEX := $(PLATFORM_SECURITY_PATCH_TIMESTAMP)
diff --git a/target/board/generic/BoardConfig.mk b/target/board/generic/BoardConfig.mk
index 6c82846..738c037 100644
--- a/target/board/generic/BoardConfig.mk
+++ b/target/board/generic/BoardConfig.mk
@@ -1,11 +1,19 @@
-# config.mk
+# Copyright (C) 2018 The Android Open Source Project
 #
-# Product-specific compile-time definitions.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
 #
 
-# The generic product target doesn't have any hardware-specific pieces.
-TARGET_NO_BOOTLOADER := true
-TARGET_NO_KERNEL := true
+# arm emulator specific definitions
 TARGET_ARCH := arm
 
 # Note: Before Pi, we built the platform images for ARMv7-A _without_ NEON.
@@ -36,66 +44,11 @@
 TARGET_CPU_VARIANT := generic
 TARGET_CPU_ABI := armeabi-v7a
 TARGET_CPU_ABI2 := armeabi
-HAVE_HTC_AUDIO_DRIVER := true
-BOARD_USES_GENERIC_AUDIO := true
-TARGET_BOOTLOADER_BOARD_NAME := goldfish_$(TARGET_ARCH)
 
-TARGET_USES_64_BIT_BINDER := true
+include build/make/target/board/BoardConfigEmuCommon.mk
+include build/make/target/board/BoardConfigGsiCommon.mk
 
-# no hardware camera
-USE_CAMERA_STUB := true
-
-TARGET_USES_HWC2 := true
-NUM_FRAMEBUFFER_SURFACE_BUFFERS := 3
-
-# Build OpenGLES emulation guest and host libraries
-BUILD_EMULATOR_OPENGL := true
-BUILD_QEMU_IMAGES := true
-
-# Build and enable the OpenGL ES View renderer. When running on the emulator,
-# the GLES renderer disables itself if host GL acceleration isn't available.
-USE_OPENGL_RENDERER := true
-
-TARGET_USERIMAGES_USE_EXT4 := true
-# Partition size is default 1.5GB (1536MB) for 64 bits projects
-BOARD_SYSTEMIMAGE_PARTITION_SIZE := 1610612736
 BOARD_USERDATAIMAGE_PARTITION_SIZE := 576716800
-TARGET_COPY_OUT_VENDOR := vendor
-# ~100 MB vendor image. Please adjust system image / vendor image sizes
-# when finalizing them.
-BOARD_VENDORIMAGE_PARTITION_SIZE := 100000000
-BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE := ext4
-BOARD_FLASH_BLOCK_SIZE := 512
-TARGET_USERIMAGES_SPARSE_EXT_DISABLED := true
-DEVICE_MATRIX_FILE   := device/generic/goldfish/compatibility_matrix.xml
-
-# Android generic system image always create metadata partition
-BOARD_USES_METADATA_PARTITION := true
-
-# Set this to create /cache mount point for non-A/B devices that mounts /cache.
-# The partition size doesn't matter, just to make build pass.
-BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE := ext4
-BOARD_CACHEIMAGE_PARTITION_SIZE := 16777216
-
-BOARD_SEPOLICY_DIRS += device/generic/goldfish/sepolicy/common
-BOARD_PROPERTY_OVERRIDES_SPLIT_ENABLED := true
-
-# Android Verified Boot (AVB):
-#   Builds a special vbmeta.img that disables AVB verification.
-#   Otherwise, AVB will prevent the device from booting the generic system.img.
-#   Also checks that BOARD_AVB_ENABLE is not set, to prevent adding verity
-#   metadata into system.img.
-ifeq ($(BOARD_AVB_ENABLE),true)
-$(error BOARD_AVB_ENABLE cannot be set for GSI)
-endif
-BOARD_BUILD_DISABLED_VBMETAIMAGE := true
-
-ifneq (,$(filter userdebug eng,$(TARGET_BUILD_VARIANT)))
-# GSI is always userdebug and needs a couple of properties taking precedence
-# over those set by the vendor.
-TARGET_SYSTEM_PROP := build/make/target/board/gsi_system.prop
-endif
-BOARD_VNDK_VERSION := current
 
 # Wifi.
 BOARD_WLAN_DEVICE           := emulator
@@ -107,7 +60,3 @@
 WIFI_DRIVER_FW_PATH_PARAM   := "/dev/null"
 WIFI_DRIVER_FW_PATH_STA     := "/dev/null"
 WIFI_DRIVER_FW_PATH_AP      := "/dev/null"
-
-# Enable A/B update
-TARGET_NO_RECOVERY := true
-BOARD_BUILD_SYSTEM_ROOT_IMAGE := true
diff --git a/target/board/generic/device.mk b/target/board/generic/device.mk
index 273ac71..0a32415 100644
--- a/target/board/generic/device.mk
+++ b/target/board/generic/device.mk
@@ -14,14 +14,6 @@
 # limitations under the License.
 #
 
-# minimal configuration for audio policy.
-PRODUCT_COPY_FILES += \
-    frameworks/av/services/audiopolicy/config/audio_policy_configuration_generic.xml:system/etc/audio_policy_configuration.xml \
-    frameworks/av/services/audiopolicy/config/primary_audio_policy_configuration.xml:system/etc/primary_audio_policy_configuration.xml \
-    frameworks/av/services/audiopolicy/config/r_submix_audio_policy_configuration.xml:system/etc/r_submix_audio_policy_configuration.xml \
-    frameworks/av/services/audiopolicy/config/audio_policy_volumes.xml:system/etc/audio_policy_volumes.xml \
-    frameworks/av/services/audiopolicy/config/default_volume_tables.xml:system/etc/default_volume_tables.xml \
-
 # NFC:
 #   Provide default libnfc-nci.conf file for devices that does not have one in
 #   vendor/etc because aosp system image (of aosp_$arch products) is going to
diff --git a/target/board/generic_arm64/BoardConfig.mk b/target/board/generic_arm64/BoardConfig.mk
index 56f15de..1b6429c 100644
--- a/target/board/generic_arm64/BoardConfig.mk
+++ b/target/board/generic_arm64/BoardConfig.mk
@@ -1,4 +1,4 @@
-# Copyright (C) 2013 The Android Open Source Project
+# Copyright (C) 2018 The Android Open Source Project
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
@@ -13,20 +13,17 @@
 # limitations under the License.
 #
 
-# The generic product target doesn't have any hardware-specific pieces.
-TARGET_NO_BOOTLOADER := true
-TARGET_NO_KERNEL := true
+# arm64 emulator specific definitions
 TARGET_ARCH := arm64
 TARGET_ARCH_VARIANT := armv8-a
 TARGET_CPU_VARIANT := generic
 TARGET_CPU_ABI := arm64-v8a
-TARGET_BOOTLOADER_BOARD_NAME := goldfish_$(TARGET_ARCH)
 
 TARGET_2ND_ARCH := arm
 TARGET_2ND_CPU_ABI := armeabi-v7a
 TARGET_2ND_CPU_ABI2 := armeabi
 
-ifneq ($(TARGET_BUILD_APPS)$(filter cts sdk,$(MAKECMDGOALS)),)
+ifneq ($(TARGET_BUILD_APPS)$(filter cts vts sdk,$(MAKECMDGOALS)),)
 # DO NOT USE
 # DO NOT USE
 #
@@ -55,69 +52,18 @@
 TARGET_2ND_CPU_VARIANT := generic
 endif
 
+include build/make/target/board/BoardConfigEmuCommon.mk
+include build/make/target/board/BoardConfigGsiCommon.mk
 
-TARGET_USES_64_BIT_BINDER := true
-
-# no hardware camera
-USE_CAMERA_STUB := true
-
-TARGET_USES_HWC2 := true
-NUM_FRAMEBUFFER_SURFACE_BUFFERS := 3
-
-# Build OpenGLES emulation host and guest libraries
-BUILD_EMULATOR_OPENGL := true
-BUILD_QEMU_IMAGES := true
-
-# Build and enable the OpenGL ES View renderer. When running on the emulator,
-# the GLES renderer disables itself if host GL acceleration isn't available.
-USE_OPENGL_RENDERER := true
-
-TARGET_USERIMAGES_USE_EXT4 := true
-BOARD_SYSTEMIMAGE_PARTITION_SIZE := 2684354560 # 2.5 GB
 BOARD_USERDATAIMAGE_PARTITION_SIZE := 576716800
-TARGET_COPY_OUT_VENDOR := vendor
-# ~100 MB vendor image. Please adjust system image / vendor image sizes
-# when finalizing them.
-BOARD_VENDORIMAGE_PARTITION_SIZE := 100000000
-BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE := ext4
-BOARD_FLASH_BLOCK_SIZE := 512
-TARGET_USERIMAGES_SPARSE_EXT_DISABLED := true
-DEVICE_MATRIX_FILE   := device/generic/goldfish/compatibility_matrix.xml
-
-# Android generic system image always create metadata partition
-BOARD_USES_METADATA_PARTITION := true
-
-# Set this to create /cache mount point for non-A/B devices that mounts /cache.
-# The partition size doesn't matter, just to make build pass.
-BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE := ext4
-BOARD_CACHEIMAGE_PARTITION_SIZE := 16777216
-
-BOARD_PROPERTY_OVERRIDES_SPLIT_ENABLED := true
-BOARD_SEPOLICY_DIRS += device/generic/goldfish/sepolicy/common
-
-# Android Verified Boot (AVB):
-#   Builds a special vbmeta.img that disables AVB verification.
-#   Otherwise, AVB will prevent the device from booting the generic system.img.
-#   Also checks that BOARD_AVB_ENABLE is not set, to prevent adding verity
-#   metadata into system.img.
-ifeq ($(BOARD_AVB_ENABLE),true)
-$(error BOARD_AVB_ENABLE cannot be set for GSI)
-endif
-BOARD_BUILD_DISABLED_VBMETAIMAGE := true
-
-ifneq (,$(filter userdebug eng,$(TARGET_BUILD_VARIANT)))
-# GSI is always userdebug and needs a couple of properties taking precedence
-# over those set by the vendor.
-TARGET_SYSTEM_PROP := build/make/target/board/gsi_system.prop
-endif
-BOARD_VNDK_VERSION := current
 
 # Emulator system image is going to be used as GSI and some vendor still hasn't
 # cleaned up all device specific directories under root!
 
-# TODO(jiyong) These might be SoC specific.
-BOARD_ROOT_EXTRA_FOLDERS += firmware firmware/radio persist
-BOARD_ROOT_EXTRA_SYMLINKS := /vendor/lib/dsp:/dsp
+# TODO(b/111434759, b/111287060) SoC specific hacks
+BOARD_ROOT_EXTRA_SYMLINKS += /vendor/lib/dsp:/dsp
+BOARD_ROOT_EXTRA_SYMLINKS += /mnt/vendor/persist:/persist
+BOARD_ROOT_EXTRA_SYMLINKS += /vendor/firmware_mnt:/firmware
 
 # TODO(b/36764215): remove this setting when the generic system image
 # no longer has QCOM-specific directories under /.
@@ -133,7 +79,3 @@
 WIFI_DRIVER_FW_PATH_PARAM   := "/dev/null"
 WIFI_DRIVER_FW_PATH_STA     := "/dev/null"
 WIFI_DRIVER_FW_PATH_AP      := "/dev/null"
-
-# Enable A/B update
-TARGET_NO_RECOVERY := true
-BOARD_BUILD_SYSTEM_ROOT_IMAGE := true
diff --git a/target/board/generic_arm64/device.mk b/target/board/generic_arm64/device.mk
index 8e26700..2004624 100644
--- a/target/board/generic_arm64/device.mk
+++ b/target/board/generic_arm64/device.mk
@@ -14,14 +14,6 @@
 # limitations under the License.
 #
 
-# minimal configuration for audio policy.
-PRODUCT_COPY_FILES += \
-    frameworks/av/services/audiopolicy/config/audio_policy_configuration_generic.xml:system/etc/audio_policy_configuration.xml \
-    frameworks/av/services/audiopolicy/config/primary_audio_policy_configuration.xml:system/etc/primary_audio_policy_configuration.xml \
-    frameworks/av/services/audiopolicy/config/r_submix_audio_policy_configuration.xml:system/etc/r_submix_audio_policy_configuration.xml \
-    frameworks/av/services/audiopolicy/config/audio_policy_volumes.xml:system/etc/audio_policy_volumes.xml \
-    frameworks/av/services/audiopolicy/config/default_volume_tables.xml:system/etc/default_volume_tables.xml \
-
 # NFC:
 #   Provide default libnfc-nci.conf file for devices that does not have one in
 #   vendor/etc because aosp system image (of aosp_$arch products) is going to
diff --git a/target/board/generic_arm64_ab/BoardConfig.mk b/target/board/generic_arm64_ab/BoardConfig.mk
index fc6b582..88b90a8 100644
--- a/target/board/generic_arm64_ab/BoardConfig.mk
+++ b/target/board/generic_arm64_ab/BoardConfig.mk
@@ -34,7 +34,9 @@
 
 # TODO(jiyong) These might be SoC specific.
 BOARD_ROOT_EXTRA_FOLDERS += firmware firmware/radio persist
-BOARD_ROOT_EXTRA_SYMLINKS := /vendor/lib/dsp:/dsp
+BOARD_ROOT_EXTRA_SYMLINKS += /vendor/lib/dsp:/dsp
+BOARD_ROOT_EXTRA_SYMLINKS += /vendor/firmware_mnt/image:/firmware/image
+BOARD_ROOT_EXTRA_SYMLINKS += /vendor/firmware_mnt/verinfo:/firmware/verinfo
 
 # Set this to create /cache mount point for non-A/B devices that mounts /cache.
 # The partition size doesn't matter, just to make build pass.
diff --git a/target/board/generic_arm64_ab/sepolicy/OWNERS b/target/board/generic_arm64_ab/sepolicy/OWNERS
index 3828988..ff29677 100644
--- a/target/board/generic_arm64_ab/sepolicy/OWNERS
+++ b/target/board/generic_arm64_ab/sepolicy/OWNERS
@@ -1,4 +1,8 @@
-jeffv@google.com
-dcashman@google.com
+alanstokes@google.com
+bowgotsai@google.com
 jbires@google.com
+jeffv@google.com
+jgalenson@google.com
 sspatil@google.com
+tomcherry@google.com
+trong@google.com
diff --git a/target/board/generic_arm_a/BoardConfig.mk b/target/board/generic_arm_a/BoardConfig.mk
index f0e1a39..57a5196 100644
--- a/target/board/generic_arm_a/BoardConfig.mk
+++ b/target/board/generic_arm_a/BoardConfig.mk
@@ -16,9 +16,6 @@
 
 include build/make/target/board/treble_common_32.mk
 
-# Overwrite the setting in treble_common_32.mk for non-A/B arm GSI
-BOARD_SYSTEMIMAGE_PARTITION_SIZE := 943718400 # 900MB
-
 TARGET_ARCH := arm
 TARGET_ARCH_VARIANT := armv7-a-neon
 TARGET_CPU_ABI := armeabi-v7a
diff --git a/target/board/generic_arm_ab/BoardConfig.mk b/target/board/generic_arm_ab/BoardConfig.mk
index 7c04cd5..3d14842 100644
--- a/target/board/generic_arm_ab/BoardConfig.mk
+++ b/target/board/generic_arm_ab/BoardConfig.mk
@@ -16,9 +16,6 @@
 
 include build/make/target/board/treble_common_32.mk
 
-# Overwrite the setting in treble_common_32.mk for non-A/B arm GSI
-BOARD_SYSTEMIMAGE_PARTITION_SIZE := 943718400 # 900MB
-
 TARGET_ARCH := arm
 TARGET_ARCH_VARIANT := armv7-a-neon
 TARGET_CPU_ABI := armeabi-v7a
@@ -31,7 +28,9 @@
 
 # TODO(jiyong) These might be SoC specific.
 BOARD_ROOT_EXTRA_FOLDERS += firmware firmware/radio persist
-BOARD_ROOT_EXTRA_SYMLINKS := /vendor/lib/dsp:/dsp
+BOARD_ROOT_EXTRA_SYMLINKS += /vendor/lib/dsp:/dsp
+BOARD_ROOT_EXTRA_SYMLINKS += /vendor/firmware_mnt/image:/firmware/image
+BOARD_ROOT_EXTRA_SYMLINKS += /vendor/firmware_mnt/verinfo:/firmware/verinfo
 
 # Set this to create /cache mount point for non-A/B devices that mounts /cache.
 # The partition size doesn't matter, just to make build pass.
diff --git a/target/board/generic_mips/BoardConfig.mk b/target/board/generic_mips/BoardConfig.mk
deleted file mode 100644
index 523408b..0000000
--- a/target/board/generic_mips/BoardConfig.mk
+++ /dev/null
@@ -1,76 +0,0 @@
-#
-# Copyright (C) 2011 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# BoardConfig.mk
-#
-# Product-specific compile-time definitions.
-#
-
-# The generic product target doesn't have any hardware-specific pieces.
-TARGET_NO_BOOTLOADER := true
-TARGET_NO_KERNEL := true
-
-TARGET_ARCH := mips
-ifeq (,$(TARGET_ARCH_VARIANT))
-TARGET_ARCH_VARIANT := mips32r2-fp
-endif
-TARGET_CPU_ABI  := mips
-
-# Make TARGET_CPU_VARIANT the same as TARGET_ARCH_VARIANT
-TARGET_CPU_VARIANT := $(TARGET_ARCH_VARIANT)
-
-HAVE_HTC_AUDIO_DRIVER := true
-BOARD_USES_GENERIC_AUDIO := true
-
-# no hardware camera
-USE_CAMERA_STUB := true
-
-# Enable dex-preoptimization to speed up the first boot sequence
-# of an SDK AVD. Note that this operation only works on Linux for now
-ifeq ($(HOST_OS),linux)
-  ifeq ($(WITH_DEXPREOPT),)
-    WITH_DEXPREOPT := true
-    WITH_DEXPREOPT_BOOT_IMG_AND_SYSTEM_SERVER_ONLY := false
-  endif
-endif
-
-TARGET_USES_HWC2 := true
-NUM_FRAMEBUFFER_SURFACE_BUFFERS := 3
-
-# Build OpenGLES emulation guest and host libraries
-BUILD_EMULATOR_OPENGL := true
-BUILD_QEMU_IMAGES := true
-
-# Build and enable the OpenGL ES View renderer. When running on the emulator,
-# the GLES renderer disables itself if host GL acceleration isn't available.
-USE_OPENGL_RENDERER := true
-
-TARGET_USERIMAGES_USE_EXT4 := true
-BOARD_SYSTEMIMAGE_PARTITION_SIZE := 2147483648  # 2 GB
-BOARD_USERDATAIMAGE_PARTITION_SIZE := 734003200
-TARGET_COPY_OUT_VENDOR := vendor
-# ~100 MB vendor image. Please adjust system image / vendor image sizes
-# when finalizing them.
-BOARD_VENDORIMAGE_PARTITION_SIZE := 100000000
-BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE := ext4
-BOARD_FLASH_BLOCK_SIZE := 512
-TARGET_USERIMAGES_SPARSE_EXT_DISABLED := true
-DEVICE_MATRIX_FILE   := device/generic/goldfish/compatibility_matrix.xml
-
-BOARD_SEPOLICY_DIRS += build/target/board/generic/sepolicy
-
-# Enable A/B update
-TARGET_NO_RECOVERY := true
-BOARD_BUILD_SYSTEM_ROOT_IMAGE := true
diff --git a/target/board/generic_mips/README.txt b/target/board/generic_mips/README.txt
deleted file mode 100644
index b31a857..0000000
--- a/target/board/generic_mips/README.txt
+++ /dev/null
@@ -1,9 +0,0 @@
-The "generic_mips" product defines a MIPS based non-hardware-specific
-target without a kernel or bootloader.
-
-It can be used to build the entire user-level system, and
-will work with the emulator, though sound will not work
-(see the "emulator" product for that).
-
-It is not a product "base class"; no other products inherit
-from it or use it in any way.
diff --git a/target/board/generic_mips/device.mk b/target/board/generic_mips/device.mk
deleted file mode 100644
index a2633e1..0000000
--- a/target/board/generic_mips/device.mk
+++ /dev/null
@@ -1,36 +0,0 @@
-#
-# Copyright (C) 2009 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-# This is a build configuration for the product aspects that
-# are specific to the emulator.
-
-PRODUCT_PROPERTY_OVERRIDES := \
-    ro.ril.hsxpa=1 \
-    ro.ril.gprsclass=10
-
-PRODUCT_COPY_FILES := \
-    device/generic/goldfish/data/etc/apns-conf.xml:system/etc/apns-conf.xml \
-    device/generic/goldfish/camera/media_profiles.xml:system/etc/media_profiles.xml \
-    frameworks/av/media/libstagefright/data/media_codecs_google_audio.xml:system/etc/media_codecs_google_audio.xml \
-    frameworks/av/media/libstagefright/data/media_codecs_google_telephony.xml:system/etc/media_codecs_google_telephony.xml \
-    frameworks/av/media/libstagefright/data/media_codecs_google_video.xml:system/etc/media_codecs_google_video.xml \
-    device/generic/goldfish/camera/media_codecs.xml:system/etc/media_codecs.xml \
-    hardware/libhardware_legacy/audio/audio_policy.conf:system/etc/audio_policy.conf
-
-PRODUCT_PACKAGES := \
-    audio.primary.goldfish \
-    power.goldfish \
-    vibrator.goldfish
diff --git a/target/board/generic_mips64/BoardConfig.mk b/target/board/generic_mips64/BoardConfig.mk
deleted file mode 100644
index 2052d7b..0000000
--- a/target/board/generic_mips64/BoardConfig.mk
+++ /dev/null
@@ -1,93 +0,0 @@
-#
-# Copyright (C) 2013 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# BoardConfig.mk
-#
-# Product-specific compile-time definitions.
-#
-
-# The generic product target doesn't have any hardware-specific pieces.
-TARGET_NO_BOOTLOADER := true
-TARGET_NO_KERNEL := true
-
-TARGET_ARCH := mips64
-ifeq (,$(TARGET_ARCH_VARIANT))
-TARGET_ARCH_VARIANT := mips64r6
-endif
-TARGET_CPU_ABI  := mips64
-
-TARGET_2ND_ARCH := mips
-ifeq (,$(TARGET_2ND_ARCH_VARIANT))
-ifeq ($(TARGET_ARCH_VARIANT),mips64r6)
-# Imgtec builds use 32r6 arch variant with Imgtec-maintained prebuilts/ndk library:
-# TARGET_2ND_ARCH_VARIANT := mips32r6
-# Aosp builds lack full set of mips32r6 NDK prebuilts, so use 32r2 abi:
-TARGET_2ND_ARCH_VARIANT :=  mips32r2-fp
-else
-TARGET_2ND_ARCH_VARIANT :=  mips32r2-fp
-endif
-endif
-TARGET_2ND_CPU_ABI  := mips
-
-# Make TARGET_XXX_CPU_VARIANT the same as TARGET_XXX_ARCH_VARIANT
-TARGET_CPU_VARIANT := $(TARGET_ARCH_VARIANT)
-TARGET_2ND_CPU_VARIANT := $(TARGET_2ND_ARCH_VARIANT)
-
-# The emulator (qemu) uses the Goldfish devices
-HAVE_HTC_AUDIO_DRIVER := true
-BOARD_USES_GENERIC_AUDIO := true
-
-# no hardware camera
-USE_CAMERA_STUB := true
-
-# Enable dex-preoptimization to speed up the first boot sequence
-# of an SDK AVD. Note that this operation only works on Linux for now
-ifeq ($(HOST_OS),linux)
-  ifeq ($(WITH_DEXPREOPT),)
-    WITH_DEXPREOPT := true
-    WITH_DEXPREOPT_BOOT_IMG_AND_SYSTEM_SERVER_ONLY := false
-  endif
-endif
-
-TARGET_USES_HWC2 := true
-NUM_FRAMEBUFFER_SURFACE_BUFFERS := 3
-
-# Build OpenGLES emulation guest and host libraries
-BUILD_EMULATOR_OPENGL := true
-BUILD_QEMU_IMAGES := true
-
-# Build and enable the OpenGL ES View renderer. When running on the emulator,
-# the GLES renderer disables itself if host GL acceleration isn't available.
-USE_OPENGL_RENDERER := true
-
-TARGET_USERIMAGES_USE_EXT4 := true
-BOARD_SYSTEMIMAGE_PARTITION_SIZE := 1879048192  # 1.75 GB
-BOARD_USERDATAIMAGE_PARTITION_SIZE := 1610612736  # 1.5 GB, lots of space for running tests
-TARGET_COPY_OUT_VENDOR := vendor
-# ~100 MB vendor image. Please adjust system image / vendor image sizes
-# when finalizing them.
-BOARD_VENDORIMAGE_PARTITION_SIZE := 100000000
-BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE := ext4
-BOARD_FLASH_BLOCK_SIZE := 512
-TARGET_USERIMAGES_SPARSE_EXT_DISABLED := true
-DEVICE_MATRIX_FILE   := device/generic/goldfish/compatibility_matrix.xml
-
-BOARD_SEPOLICY_DIRS += build/target/board/generic/sepolicy
-
-DEX_PREOPT_DEFAULT := nostripping
-
-# Enable A/B update
-TARGET_NO_RECOVERY := true
-BOARD_BUILD_SYSTEM_ROOT_IMAGE := true
diff --git a/target/board/generic_mips64/README.txt b/target/board/generic_mips64/README.txt
deleted file mode 100644
index cd4e05b..0000000
--- a/target/board/generic_mips64/README.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-The "generic_mips64" product defines a MIPS64 based non-hardware-specific
-target without a kernel or bootloader.
-
-It can be used to build the entire user-level system, and
-will work with the emulator.
-
-It is not a product "base class"; no other products inherit
-from it or use it in any way.
diff --git a/target/board/generic_mips64/device.mk b/target/board/generic_mips64/device.mk
deleted file mode 100644
index 2ccbcbd..0000000
--- a/target/board/generic_mips64/device.mk
+++ /dev/null
@@ -1,35 +0,0 @@
-#
-# Copyright (C) 2009 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-# This is a build configuration for the product aspects that
-# are specific to the emulator.
-
-PRODUCT_PROPERTY_OVERRIDES := \
-    ro.ril.hsxpa=1 \
-    ro.ril.gprsclass=10
-
-PRODUCT_COPY_FILES := \
-    device/generic/goldfish/data/etc/apns-conf.xml:system/etc/apns-conf.xml \
-    device/generic/goldfish/camera/media_profiles.xml:system/etc/media_profiles.xml \
-    frameworks/av/media/libstagefright/data/media_codecs_google_audio.xml:system/etc/media_codecs_google_audio.xml \
-    frameworks/av/media/libstagefright/data/media_codecs_google_telephony.xml:system/etc/media_codecs_google_telephony.xml \
-    frameworks/av/media/libstagefright/data/media_codecs_google_video.xml:system/etc/media_codecs_google_video.xml \
-    device/generic/goldfish/camera/media_codecs.xml:system/etc/media_codecs.xml \
-    hardware/libhardware_legacy/audio/audio_policy.conf:system/etc/audio_policy.conf
-
-PRODUCT_PACKAGES := \
-    audio.primary.goldfish \
-    power.goldfish
diff --git a/target/board/generic_mips64/system.prop b/target/board/generic_mips64/system.prop
deleted file mode 100644
index 4da69c0..0000000
--- a/target/board/generic_mips64/system.prop
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# system.prop for generic mips64 sdk
-#
-
-rild.libpath=/vendor/lib64/libreference-ril.so
-rild.libargs=-d /dev/ttyS0
diff --git a/target/board/generic_x86/BoardConfig.mk b/target/board/generic_x86/BoardConfig.mk
index 684dfc7..650073e 100644
--- a/target/board/generic_x86/BoardConfig.mk
+++ b/target/board/generic_x86/BoardConfig.mk
@@ -1,95 +1,32 @@
-# config.mk
+# Copyright (C) 2018 The Android Open Source Project
 #
-# Product-specific compile-time definitions.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
 #
 
-# The generic product target doesn't have any hardware-specific pieces.
-TARGET_NO_BOOTLOADER := true
-TARGET_NO_KERNEL := true
+# x86 emulator specific definitions
 TARGET_CPU_ABI := x86
 TARGET_ARCH := x86
 TARGET_ARCH_VARIANT := x86
+
 TARGET_PRELINK_MODULE := false
-TARGET_BOOTLOADER_BOARD_NAME := goldfish_$(TARGET_ARCH)
 
-#emulator now uses 64bit kernel to run 32bit x86 image
-#
-TARGET_USES_64_BIT_BINDER := true
+include build/make/target/board/BoardConfigEmuCommon.mk
+include build/make/target/board/BoardConfigGsiCommon.mk
 
-# The IA emulator (qemu) uses the Goldfish devices
-HAVE_HTC_AUDIO_DRIVER := true
-BOARD_USES_GENERIC_AUDIO := true
-
-# no hardware camera
-USE_CAMERA_STUB := true
-
-# Enable dex-preoptimization to speed up the first boot sequence
-# of an SDK AVD. Note that this operation only works on Linux for now
-ifeq ($(HOST_OS),linux)
-WITH_DEXPREOPT ?= true
-WITH_DEXPREOPT_BOOT_IMG_AND_SYSTEM_SERVER_ONLY ?= false
-endif
-
-TARGET_USES_HWC2 := true
-NUM_FRAMEBUFFER_SURFACE_BUFFERS := 3
-
-# Build OpenGLES emulation host and guest libraries
-BUILD_EMULATOR_OPENGL := true
-
-# Build partitioned system.img and vendor.img (if applicable)
-# for qemu, otherwise, init cannot find PART_NAME
-BUILD_QEMU_IMAGES := true
-
-# Build and enable the OpenGL ES View renderer. When running on the emulator,
-# the GLES renderer disables itself if host GL acceleration isn't available.
-USE_OPENGL_RENDERER := true
-
-TARGET_USERIMAGES_USE_EXT4 := true
-BOARD_SYSTEMIMAGE_PARTITION_SIZE := 2684354560
 # Resize to 4G to accomodate ASAN and CTS
 BOARD_USERDATAIMAGE_PARTITION_SIZE := 4294967296
-TARGET_COPY_OUT_VENDOR := vendor
-BOARD_PROPERTY_OVERRIDES_SPLIT_ENABLED := true
-# ~100 MB vendor image. Please adjust system image / vendor image sizes
-# when finalizing them.
-BOARD_VENDORIMAGE_PARTITION_SIZE := 100000000
-BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE := ext4
-BOARD_FLASH_BLOCK_SIZE := 512
-TARGET_USERIMAGES_SPARSE_EXT_DISABLED := true
-DEVICE_MATRIX_FILE   := device/generic/goldfish/compatibility_matrix.xml
 
-# Android generic system image always create metadata partition
-BOARD_USES_METADATA_PARTITION := true
-
-# Set this to create /cache mount point for non-A/B devices that mounts /cache.
-# The partition size doesn't matter, just to make build pass.
-BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE := ext4
-BOARD_CACHEIMAGE_PARTITION_SIZE := 16777216
-
-BOARD_SEPOLICY_DIRS += \
-        device/generic/goldfish/sepolicy/common \
-        device/generic/goldfish/sepolicy/x86
-
-# Android Verified Boot (AVB):
-#   Builds a special vbmeta.img that disables AVB verification.
-#   Otherwise, AVB will prevent the device from booting the generic system.img.
-#   Also checks that BOARD_AVB_ENABLE is not set, to prevent adding verity
-#   metadata into system.img.
-ifeq ($(BOARD_AVB_ENABLE),true)
-$(error BOARD_AVB_ENABLE cannot be set for GSI)
-endif
-BOARD_BUILD_DISABLED_VBMETAIMAGE := true
-
-ifneq (,$(filter userdebug eng,$(TARGET_BUILD_VARIANT)))
-# GSI is always userdebug and needs a couple of properties taking precedence
-# over those set by the vendor.
-TARGET_SYSTEM_PROP := build/make/target/board/gsi_system.prop
-endif
-BOARD_VNDK_VERSION := current
-
-# Enable A/B update
-TARGET_NO_RECOVERY := true
-BOARD_BUILD_SYSTEM_ROOT_IMAGE := true
+BOARD_SEPOLICY_DIRS += device/generic/goldfish/sepolicy/x86
 
 # Wifi.
 BOARD_WLAN_DEVICE           := emulator
diff --git a/target/board/generic_x86/device.mk b/target/board/generic_x86/device.mk
index 273ac71..0a32415 100644
--- a/target/board/generic_x86/device.mk
+++ b/target/board/generic_x86/device.mk
@@ -14,14 +14,6 @@
 # limitations under the License.
 #
 
-# minimal configuration for audio policy.
-PRODUCT_COPY_FILES += \
-    frameworks/av/services/audiopolicy/config/audio_policy_configuration_generic.xml:system/etc/audio_policy_configuration.xml \
-    frameworks/av/services/audiopolicy/config/primary_audio_policy_configuration.xml:system/etc/primary_audio_policy_configuration.xml \
-    frameworks/av/services/audiopolicy/config/r_submix_audio_policy_configuration.xml:system/etc/r_submix_audio_policy_configuration.xml \
-    frameworks/av/services/audiopolicy/config/audio_policy_volumes.xml:system/etc/audio_policy_volumes.xml \
-    frameworks/av/services/audiopolicy/config/default_volume_tables.xml:system/etc/default_volume_tables.xml \
-
 # NFC:
 #   Provide default libnfc-nci.conf file for devices that does not have one in
 #   vendor/etc because aosp system image (of aosp_$arch products) is going to
diff --git a/target/board/generic_x86_64/BoardConfig.mk b/target/board/generic_x86_64/BoardConfig.mk
index 5bcb9ad..1426630 100755
--- a/target/board/generic_x86_64/BoardConfig.mk
+++ b/target/board/generic_x86_64/BoardConfig.mk
@@ -1,89 +1,35 @@
-# config.mk
+# Copyright (C) 2018 The Android Open Source Project
 #
-# Product-specific compile-time definitions.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
 #
 
-# The generic product target doesn't have any hardware-specific pieces.
-TARGET_NO_BOOTLOADER := true
-TARGET_NO_KERNEL := true
+# x86_64 emulator specific definitions
 TARGET_CPU_ABI := x86_64
 TARGET_ARCH := x86_64
 TARGET_ARCH_VARIANT := x86_64
-TARGET_PRELINK_MODULE := false
-TARGET_BOOTLOADER_BOARD_NAME := goldfish_$(TARGET_ARCH)
 
 TARGET_2ND_CPU_ABI := x86
 TARGET_2ND_ARCH := x86
 TARGET_2ND_ARCH_VARIANT := x86_64
 
-TARGET_USES_64_BIT_BINDER := true
+TARGET_PRELINK_MODULE := false
 
-# The IA emulator (qemu) uses the Goldfish devices
-HAVE_HTC_AUDIO_DRIVER := true
-BOARD_USES_GENERIC_AUDIO := true
+include build/make/target/board/BoardConfigEmuCommon.mk
+include build/make/target/board/BoardConfigGsiCommon.mk
 
-# no hardware camera
-USE_CAMERA_STUB := true
-
-# Enable dex-preoptimization to speed up the first boot sequence
-# of an SDK AVD. Note that this operation only works on Linux for now
-ifeq ($(HOST_OS),linux)
-WITH_DEXPREOPT ?= true
-WITH_DEXPREOPT_BOOT_IMG_AND_SYSTEM_SERVER_ONLY ?= false
-endif
-
-TARGET_USES_HWC2 := true
-NUM_FRAMEBUFFER_SURFACE_BUFFERS := 3
-
-# Build OpenGLES emulation host and guest libraries
-BUILD_EMULATOR_OPENGL := true
-BUILD_QEMU_IMAGES := true
-
-# Build and enable the OpenGL ES View renderer. When running on the emulator,
-# the GLES renderer disables itself if host GL acceleration isn't available.
-USE_OPENGL_RENDERER := true
-
-TARGET_USERIMAGES_USE_EXT4 := true
-BOARD_SYSTEMIMAGE_PARTITION_SIZE := 2684354560 # 2.5 GB
 BOARD_USERDATAIMAGE_PARTITION_SIZE := 576716800
-TARGET_COPY_OUT_VENDOR := vendor
-# ~100 MB vendor image. Please adjust system image / vendor image sizes
-# when finalizing them.
-BOARD_VENDORIMAGE_PARTITION_SIZE := 100000000
-BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE := ext4
-BOARD_FLASH_BLOCK_SIZE := 512
-TARGET_USERIMAGES_SPARSE_EXT_DISABLED := true
-BOARD_PROPERTY_OVERRIDES_SPLIT_ENABLED := true
-DEVICE_MATRIX_FILE   := device/generic/goldfish/compatibility_matrix.xml
 
-# Android generic system image always create metadata partition
-BOARD_USES_METADATA_PARTITION := true
-
-# Set this to create /cache mount point for non-A/B devices that mounts /cache.
-# The partition size doesn't matter, just to make build pass.
-BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE := ext4
-BOARD_CACHEIMAGE_PARTITION_SIZE := 16777216
-
-BOARD_SEPOLICY_DIRS += \
-        device/generic/goldfish/sepolicy/common \
-        device/generic/goldfish/sepolicy/x86
-
-# Android Verified Boot (AVB):
-#   Builds a special vbmeta.img that disables AVB verification.
-#   Otherwise, AVB will prevent the device from booting the generic system.img.
-#   Also checks that BOARD_AVB_ENABLE is not set, to prevent adding verity
-#   metadata into system.img.
-ifeq ($(BOARD_AVB_ENABLE),true)
-$(error BOARD_AVB_ENABLE cannot be set for GSI)
-endif
-BOARD_BUILD_DISABLED_VBMETAIMAGE := true
-
-ifneq (,$(filter userdebug eng,$(TARGET_BUILD_VARIANT)))
-# GSI is always userdebug and needs a couple of properties taking precedence
-# over those set by the vendor.
-TARGET_SYSTEM_PROP := build/make/target/board/gsi_system.prop
-endif
-BOARD_VNDK_VERSION := current
+BOARD_SEPOLICY_DIRS += device/generic/goldfish/sepolicy/x86
 
 # Wifi.
 BOARD_WLAN_DEVICE           := emulator
@@ -95,7 +41,3 @@
 WIFI_DRIVER_FW_PATH_PARAM   := "/dev/null"
 WIFI_DRIVER_FW_PATH_STA     := "/dev/null"
 WIFI_DRIVER_FW_PATH_AP      := "/dev/null"
-
-# Enable A/B update
-TARGET_NO_RECOVERY := true
-BOARD_BUILD_SYSTEM_ROOT_IMAGE := true
diff --git a/target/board/generic_x86_64/device.mk b/target/board/generic_x86_64/device.mk
index 273ac71..0a32415 100755
--- a/target/board/generic_x86_64/device.mk
+++ b/target/board/generic_x86_64/device.mk
@@ -14,14 +14,6 @@
 # limitations under the License.
 #
 
-# minimal configuration for audio policy.
-PRODUCT_COPY_FILES += \
-    frameworks/av/services/audiopolicy/config/audio_policy_configuration_generic.xml:system/etc/audio_policy_configuration.xml \
-    frameworks/av/services/audiopolicy/config/primary_audio_policy_configuration.xml:system/etc/primary_audio_policy_configuration.xml \
-    frameworks/av/services/audiopolicy/config/r_submix_audio_policy_configuration.xml:system/etc/r_submix_audio_policy_configuration.xml \
-    frameworks/av/services/audiopolicy/config/audio_policy_volumes.xml:system/etc/audio_policy_volumes.xml \
-    frameworks/av/services/audiopolicy/config/default_volume_tables.xml:system/etc/default_volume_tables.xml \
-
 # NFC:
 #   Provide default libnfc-nci.conf file for devices that does not have one in
 #   vendor/etc because aosp system image (of aosp_$arch products) is going to
diff --git a/target/board/generic_x86_arm/BoardConfig.mk b/target/board/generic_x86_arm/BoardConfig.mk
index c66aacc..8e70b25 100644
--- a/target/board/generic_x86_arm/BoardConfig.mk
+++ b/target/board/generic_x86_arm/BoardConfig.mk
@@ -1,4 +1,4 @@
-# Copyright (C) 2016 The Android Open Source Project
+# Copyright (C) 2018 The Android Open Source Project
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
@@ -13,11 +13,7 @@
 # limitations under the License.
 #
 
-# Configuration for generic_x86 + arm libraries needed by binary translation.
-
-# The generic product target doesn't have any hardware-specific pieces.
-TARGET_NO_BOOTLOADER := true
-TARGET_NO_KERNEL := true
+# x86 emulator specific definitions
 TARGET_CPU_ABI := x86
 TARGET_ARCH := x86
 TARGET_ARCH_VARIANT := x86
@@ -28,37 +24,27 @@
 TARGET_2ND_ARCH_VARIANT := armv7-a
 TARGET_2ND_CPU_VARIANT := generic
 
-# Tell the build system this isn't a typical 64bit+32bit multilib configuration.
+TARGET_CPU_ABI_LIST := x86 armeabi-v7a armeabi
 TARGET_TRANSLATE_2ND_ARCH := true
 
-# no hardware camera
-USE_CAMERA_STUB := true
+BUILD_BROKEN_DUP_RULES := true
 
-# Enable dex-preoptimization to speed up the first boot sequence
-# of an SDK AVD. Note that this operation only works on Linux for now
-ifeq ($(HOST_OS),linux)
-  ifeq ($(WITH_DEXPREOPT),)
-    WITH_DEXPREOPT := true
-    WITH_DEXPREOPT_BOOT_IMG_AND_SYSTEM_SERVER_ONLY := false
-  endif
-endif
 
-TARGET_USES_HWC2 := true
-NUM_FRAMEBUFFER_SURFACE_BUFFERS := 3
+include build/make/target/board/BoardConfigEmuCommon.mk
+include build/make/target/board/BoardConfigGsiCommon.mk
 
-# Build OpenGLES emulation host and guest libraries
-BUILD_EMULATOR_OPENGL := true
+# Resize to 4G to accomodate ASAN and CTS
+BOARD_USERDATAIMAGE_PARTITION_SIZE := 4294967296
 
-# Build and enable the OpenGL ES View renderer. When running on the emulator,
-# the GLES renderer disables itself if host GL acceleration isn't available.
-USE_OPENGL_RENDERER := true
+BOARD_SEPOLICY_DIRS += device/generic/goldfish/sepolicy/x86
 
-TARGET_USERIMAGES_USE_EXT4 := true
-BOARD_SYSTEMIMAGE_PARTITION_SIZE := 1879048192  # 1.75 GB
-BOARD_USERDATAIMAGE_PARTITION_SIZE := 576716800
-BOARD_CACHEIMAGE_PARTITION_SIZE := 69206016
-BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE := ext4
-BOARD_FLASH_BLOCK_SIZE := 512
-TARGET_USERIMAGES_SPARSE_EXT_DISABLED := true
-
-BOARD_SEPOLICY_DIRS += device/generic/goldfish/sepolicy/common
+# Wifi.
+BOARD_WLAN_DEVICE           := emulator
+BOARD_HOSTAPD_DRIVER        := NL80211
+BOARD_WPA_SUPPLICANT_DRIVER := NL80211
+BOARD_HOSTAPD_PRIVATE_LIB   := lib_driver_cmd_simulated
+BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_simulated
+WPA_SUPPLICANT_VERSION      := VER_0_8_X
+WIFI_DRIVER_FW_PATH_PARAM   := "/dev/null"
+WIFI_DRIVER_FW_PATH_STA     := "/dev/null"
+WIFI_DRIVER_FW_PATH_AP      := "/dev/null"
diff --git a/target/board/generic_x86_arm/README.txt b/target/board/generic_x86_arm/README.txt
new file mode 100644
index 0000000..05f7ca2
--- /dev/null
+++ b/target/board/generic_x86_arm/README.txt
@@ -0,0 +1,10 @@
+The "generic_x86_arm" product defines a non-hardware-specific IA target
+without a kernel or bootloader.
+
+It can be used to build the entire user-level system, and
+will work with the IA version of the emulator,
+
+It is not a product "base class"; no other products inherit
+from it or use it in any way.
+
+Third party arm to x86 translator has to be installed as well
diff --git a/target/board/generic_x86_arm/device.mk b/target/board/generic_x86_arm/device.mk
new file mode 100644
index 0000000..0a32415
--- /dev/null
+++ b/target/board/generic_x86_arm/device.mk
@@ -0,0 +1,24 @@
+#
+# Copyright (C) 2009 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# NFC:
+#   Provide default libnfc-nci.conf file for devices that does not have one in
+#   vendor/etc because aosp system image (of aosp_$arch products) is going to
+#   be used as GSI.
+#   May need to remove the following for newly launched devices in P since this
+#   NFC configuration file should be in vendor/etc, instead of system/etc
+PRODUCT_COPY_FILES += \
+    device/generic/common/nfc/libnfc-nci.conf:system/etc/libnfc-nci.conf
diff --git a/target/board/generic_mips/system.prop b/target/board/generic_x86_arm/system.prop
similarity index 74%
rename from target/board/generic_mips/system.prop
rename to target/board/generic_x86_arm/system.prop
index 973db2c..64829f3 100644
--- a/target/board/generic_mips/system.prop
+++ b/target/board/generic_x86_arm/system.prop
@@ -3,4 +3,3 @@
 #
 
 rild.libpath=/vendor/lib/libreference-ril.so
-rild.libargs=-d /dev/ttyS0
diff --git a/target/board/mainline_arm64/BoardConfig.mk b/target/board/mainline_arm64/BoardConfig.mk
new file mode 100644
index 0000000..521d976
--- /dev/null
+++ b/target/board/mainline_arm64/BoardConfig.mk
@@ -0,0 +1,27 @@
+# Copyright (C) 2018 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+TARGET_ARCH := arm64
+TARGET_ARCH_VARIANT := armv8-a
+TARGET_CPU_VARIANT := generic
+TARGET_CPU_ABI := arm64-v8a
+
+TARGET_2ND_ARCH := arm
+TARGET_2ND_ARCH_VARIANT := armv8-a
+TARGET_2ND_CPU_ABI := armeabi-v7a
+TARGET_2ND_CPU_ABI2 := armeabi
+TARGET_2ND_CPU_VARIANT := generic
+
+include build/make/target/board/BoardConfigMainlineCommon.mk
diff --git a/target/board/treble_common.mk b/target/board/treble_common.mk
index c4e68fe..eda5b37 100644
--- a/target/board/treble_common.mk
+++ b/target/board/treble_common.mk
@@ -34,7 +34,9 @@
 TARGET_USERIMAGES_USE_EXT4 := true
 TARGET_USERIMAGES_USE_F2FS := true
 TARGET_USERIMAGES_SPARSE_EXT_DISABLED := false
-TARGET_USES_MKE2FS := true
+
+# Enable dynamic system image size and reserved 64MB in it.
+BOARD_SYSTEMIMAGE_PARTITION_RESERVED_SIZE := 67108864
 
 # Generic AOSP image always requires separate vendor.img
 TARGET_COPY_OUT_VENDOR := vendor
@@ -42,8 +44,6 @@
 # Android generic system image always create metadata partition
 BOARD_USES_METADATA_PARTITION := true
 
-# Generic AOSP image does NOT support HWC1
-TARGET_USES_HWC2 := true
 # Set emulator framebuffer display device buffer count to 3
 NUM_FRAMEBUFFER_SURFACE_BUFFERS := 3
 
@@ -51,11 +51,19 @@
 USE_XML_AUDIO_POLICY_CONF := 1
 
 # Android Verified Boot (AVB):
-#   Builds a special vbmeta.img that disables AVB verification.
-#   Otherwise, AVB will prevent the device from booting the generic system.img.
-#   Also checks that BOARD_AVB_ENABLE is not set, to prevent adding verity
-#   metadata into system.img.
-ifeq ($(BOARD_AVB_ENABLE),true)
-$(error BOARD_AVB_ENABLE cannot be set for Treble GSI)
-endif
-BOARD_BUILD_DISABLED_VBMETAIMAGE := true
+#   1) Sets BOARD_AVB_ENABLE to sign the GSI image.
+#   2) Sets AVB_VBMETA_IMAGE_FLAGS_VERIFICATION_DISABLED (--flag 2) in
+#      vbmeta.img to disable AVB verification.
+#
+# To disable AVB for GSI, use the vbmeta.img and the GSI together.
+# To enable AVB for GSI, include the GSI public key into the device-specific
+# vbmeta.img.
+BOARD_AVB_ENABLE := true
+BOARD_AVB_ROLLBACK_INDEX := $(PLATFORM_SECURITY_PATCH_TIMESTAMP)
+BOARD_AVB_MAKE_VBMETA_IMAGE_ARGS += --flag 2
+
+# Enable chain partition for system.
+BOARD_AVB_SYSTEM_KEY_PATH := external/avb/test/data/testkey_rsa2048.pem
+BOARD_AVB_SYSTEM_ALGORITHM := SHA256_RSA2048
+BOARD_AVB_SYSTEM_ROLLBACK_INDEX := $(PLATFORM_SECURITY_PATCH_TIMESTAMP)
+BOARD_AVB_SYSTEM_ROLLBACK_INDEX_LOCATION := 1
diff --git a/target/board/treble_common_32.mk b/target/board/treble_common_32.mk
index dbe0899..b66c41e 100644
--- a/target/board/treble_common_32.mk
+++ b/target/board/treble_common_32.mk
@@ -15,7 +15,3 @@
 #
 
 include build/make/target/board/treble_common.mk
-
-# Partition size defaults to 1 GB (1024 MB) for 32-bit products. It can
-# be overwritten in specific BoardConfig.mk, if so desired.
-BOARD_SYSTEMIMAGE_PARTITION_SIZE := 1073741824
diff --git a/target/board/treble_common_64.mk b/target/board/treble_common_64.mk
index 0a6eb17..8980dfd 100644
--- a/target/board/treble_common_64.mk
+++ b/target/board/treble_common_64.mk
@@ -18,6 +18,3 @@
 
 # Enable 64-bits binder
 TARGET_USES_64_BIT_BINDER := true
-
-# Partition size is default 1.5GB (1536MB) for 64 bits projects
-BOARD_SYSTEMIMAGE_PARTITION_SIZE := 1610612736
diff --git a/target/product/AndroidProducts.mk b/target/product/AndroidProducts.mk
index 85330b3..480b395 100644
--- a/target/product/AndroidProducts.mk
+++ b/target/product/AndroidProducts.mk
@@ -34,48 +34,47 @@
 # Unbundled apps will be built with the most generic product config.
 ifneq ($(TARGET_BUILD_APPS),)
 PRODUCT_MAKEFILES := \
-    $(LOCAL_DIR)/aosp_arm.mk \
-    $(LOCAL_DIR)/full.mk \
-    $(LOCAL_DIR)/aosp_x86.mk \
-    $(LOCAL_DIR)/full_x86.mk \
-    $(LOCAL_DIR)/aosp_mips.mk \
-    $(LOCAL_DIR)/full_mips.mk \
     $(LOCAL_DIR)/aosp_arm64.mk \
-    $(LOCAL_DIR)/aosp_mips64.mk \
-    $(LOCAL_DIR)/aosp_x86_64.mk
+    $(LOCAL_DIR)/aosp_arm.mk \
+    $(LOCAL_DIR)/aosp_x86_64.mk \
+    $(LOCAL_DIR)/aosp_x86.mk \
+    $(LOCAL_DIR)/full.mk \
+    $(LOCAL_DIR)/full_x86.mk \
+
 else
 PRODUCT_MAKEFILES := \
-    $(LOCAL_DIR)/core.mk \
+    $(LOCAL_DIR)/aosp_arm64_ab.mk \
+    $(LOCAL_DIR)/aosp_arm64_a.mk \
+    $(LOCAL_DIR)/aosp_arm64.mk \
+    $(LOCAL_DIR)/aosp_arm_ab.mk \
+    $(LOCAL_DIR)/aosp_arm_a.mk \
+    $(LOCAL_DIR)/aosp_arm.mk \
+    $(LOCAL_DIR)/aosp_x86_64_ab.mk \
+    $(LOCAL_DIR)/aosp_x86_64_a.mk \
+    $(LOCAL_DIR)/aosp_x86_64.mk \
+    $(LOCAL_DIR)/aosp_x86_ab.mk \
+    $(LOCAL_DIR)/aosp_x86_a.mk \
+    $(LOCAL_DIR)/aosp_x86_arm.mk \
+    $(LOCAL_DIR)/aosp_x86.mk \
+    $(LOCAL_DIR)/full.mk \
+    $(LOCAL_DIR)/full_x86.mk \
     $(LOCAL_DIR)/generic.mk \
     $(LOCAL_DIR)/generic_x86.mk \
-    $(LOCAL_DIR)/generic_mips.mk \
-    $(LOCAL_DIR)/aosp_arm.mk \
-    $(LOCAL_DIR)/aosp_arm_a.mk \
-    $(LOCAL_DIR)/aosp_arm_ab.mk \
-    $(LOCAL_DIR)/full.mk \
-    $(LOCAL_DIR)/aosp_x86.mk \
-    $(LOCAL_DIR)/aosp_x86_a.mk \
-    $(LOCAL_DIR)/aosp_x86_ab.mk \
-    $(LOCAL_DIR)/aosp_x86_arm.mk \
-    $(LOCAL_DIR)/full_x86.mk \
-    $(LOCAL_DIR)/aosp_mips.mk \
-    $(LOCAL_DIR)/full_mips.mk \
-    $(LOCAL_DIR)/aosp_arm64.mk \
-    $(LOCAL_DIR)/aosp_arm64_a.mk \
-    $(LOCAL_DIR)/aosp_arm64_ab.mk \
-    $(LOCAL_DIR)/aosp_mips64.mk \
-    $(LOCAL_DIR)/aosp_x86_64.mk \
-    $(LOCAL_DIR)/aosp_x86_64_a.mk \
-    $(LOCAL_DIR)/aosp_x86_64_ab.mk \
-    $(LOCAL_DIR)/sdk_phone_armv7.mk \
-    $(LOCAL_DIR)/sdk_phone_x86.mk \
-    $(LOCAL_DIR)/sdk_phone_mips.mk \
-    $(LOCAL_DIR)/sdk_phone_arm64.mk \
-    $(LOCAL_DIR)/sdk_phone_x86_64.mk \
-    $(LOCAL_DIR)/sdk_phone_mips64.mk \
-    $(LOCAL_DIR)/sdk.mk \
-    $(LOCAL_DIR)/sdk_x86.mk \
-    $(LOCAL_DIR)/sdk_mips.mk \
+    $(LOCAL_DIR)/mainline_arm64.mk \
+    $(LOCAL_DIR)/mainline_system_arm64.mk \
     $(LOCAL_DIR)/sdk_arm64.mk \
-    $(LOCAL_DIR)/sdk_x86_64.mk
+    $(LOCAL_DIR)/sdk.mk \
+    $(LOCAL_DIR)/sdk_phone_arm64.mk \
+    $(LOCAL_DIR)/sdk_phone_armv7.mk \
+    $(LOCAL_DIR)/sdk_phone_x86_64.mk \
+    $(LOCAL_DIR)/sdk_phone_x86.mk \
+    $(LOCAL_DIR)/sdk_x86_64.mk \
+    $(LOCAL_DIR)/sdk_x86.mk \
+
 endif
+
+COMMON_LUNCH_CHOICES := \
+    aosp_arm64-eng \
+    aosp_arm-eng \
+    aosp_x86_64-eng \
+    aosp_x86-eng \
diff --git a/target/product/OWNERS b/target/product/OWNERS
new file mode 100644
index 0000000..1c74859
--- /dev/null
+++ b/target/product/OWNERS
@@ -0,0 +1 @@
+per-file runtime_libart.mk = agampe@google.com, calin@google.com, mast@google.com, ngeoffray@google.com, oth@google.com, rpl@google.com, sehr@google.com, vmarko@google.com
diff --git a/target/product/aosp_arm.mk b/target/product/aosp_arm.mk
index b872f48..5a6a092 100644
--- a/target/product/aosp_arm.mk
+++ b/target/product/aosp_arm.mk
@@ -14,15 +14,35 @@
 # limitations under the License.
 #
 
--include device/generic/goldfish/arm32-vendor.mk
+# The system image of aosp_arm-userdebug is a GSI for the devices with:
+# - ARM 32 bits user space
+# - 64 bits binder interface
+# - system-as-root
+# - VNDK enforcement
+# - compatible property override enabled
 
-# TODO(b/78308559): includes vr_hwc into GSI before vr_hwc move to vendor
-PRODUCT_PACKAGES += \
-    vr_hwc
+-include device/generic/goldfish/arm32-vendor.mk
 
 include $(SRC_TARGET_DIR)/product/full.mk
 
+# Enable dynamic partition size
+PRODUCT_USE_DYNAMIC_PARTITION_SIZE := true
+
+# Enable A/B update
+AB_OTA_UPDATER := true
+AB_OTA_PARTITIONS := system
+PRODUCT_PACKAGES += \
+    update_engine \
+    update_verifier
+
 # Needed by Pi newly launched device to pass VtsTrebleSysProp on GSI
 PRODUCT_COMPATIBLE_PROPERTY_OVERRIDE := true
 
+# GSI specific tasks on boot
+PRODUCT_COPY_FILES += \
+    build/make/target/product/vndk/init.gsi.rc:system/etc/init/init.gsi.rc
+
+# Support addtional P vendor interface
+PRODUCT_EXTRA_VNDK_VERSIONS := 28
+
 PRODUCT_NAME := aosp_arm
diff --git a/target/product/aosp_arm64.mk b/target/product/aosp_arm64.mk
index 33defe1..90c159f 100644
--- a/target/product/aosp_arm64.mk
+++ b/target/product/aosp_arm64.mk
@@ -14,6 +14,13 @@
 # limitations under the License.
 #
 
+# The system image of aosp_arm64-userdebug is a GSI for the devices with:
+# - ARM 64 bits user space
+# - 64 bits binder interface
+# - system-as-root
+# - VNDK enforcement
+# - compatible property override enabled
+
 # This is a build configuration for a full-featured build of the
 # Open-Source part of the tree. It's geared toward a US-centric
 # build quite specifically for the emulator, and might not be
@@ -29,18 +36,31 @@
 PRODUCT_COPY_FILES += \
     system/core/rootdir/init.zygote32_64.rc:root/init.zygote32_64.rc
 
-# TODO(b/78308559): includes vr_hwc into GSI before vr_hwc move to vendor
-PRODUCT_PACKAGES += \
-    vr_hwc
-
 $(call inherit-product, $(SRC_TARGET_DIR)/product/emulator.mk)
 $(call inherit-product, $(SRC_TARGET_DIR)/product/core_64_bit.mk)
 $(call inherit-product, $(SRC_TARGET_DIR)/product/aosp_base_telephony.mk)
 $(call inherit-product, $(SRC_TARGET_DIR)/board/generic_arm64/device.mk)
 
+# Enable dynamic partition size
+PRODUCT_USE_DYNAMIC_PARTITION_SIZE := true
+
+# Enable A/B update
+AB_OTA_UPDATER := true
+AB_OTA_PARTITIONS := system
+PRODUCT_PACKAGES += \
+    update_engine \
+    update_verifier
+
 # Needed by Pi newly launched device to pass VtsTrebleSysProp on GSI
 PRODUCT_COMPATIBLE_PROPERTY_OVERRIDE := true
 
+# GSI specific tasks on boot
+PRODUCT_COPY_FILES += \
+    build/make/target/product/vndk/init.gsi.rc:system/etc/init/init.gsi.rc
+
+# Support addtional P vendor interface
+PRODUCT_EXTRA_VNDK_VERSIONS := 28
+
 PRODUCT_NAME := aosp_arm64
 PRODUCT_DEVICE := generic_arm64
 PRODUCT_BRAND := Android
diff --git a/target/product/aosp_arm64_ab.mk b/target/product/aosp_arm64_ab.mk
index 6ff1157..d389c74 100644
--- a/target/product/aosp_arm64_ab.mk
+++ b/target/product/aosp_arm64_ab.mk
@@ -19,8 +19,20 @@
 # on the generic system image, place them in build/make/target/board/
 # treble_system.prop.
 
+# aosp_arm64_ab-userdebug is a Legacy GSI for the devices with:
+# - ARM 64 bits user space
+# - 64 bits binder interface
+# - system-as-root
+
 include build/make/target/product/treble_common_64.mk
 
+# Enable A/B update
+AB_OTA_UPDATER := true
+AB_OTA_PARTITIONS := system
+PRODUCT_PACKAGES += \
+    update_engine \
+    update_verifier
+
 PRODUCT_NAME := aosp_arm64_ab
 PRODUCT_DEVICE := generic_arm64_ab
 PRODUCT_BRAND := Android
diff --git a/target/product/aosp_arm_ab.mk b/target/product/aosp_arm_ab.mk
index 9a4688e..5845d3b 100644
--- a/target/product/aosp_arm_ab.mk
+++ b/target/product/aosp_arm_ab.mk
@@ -19,8 +19,20 @@
 # on the generic system image, place them in build/make/target/board/
 # treble_system.prop.
 
+# aosp_arm_ab-userdebug is a Legacy GSI for the devices with:
+# - ARM 32 bits user space
+# - 32 bits binder interface
+# - system-as-root
+
 include build/make/target/product/treble_common_32.mk
 
+# Enable A/B update
+AB_OTA_UPDATER := true
+AB_OTA_PARTITIONS := system
+PRODUCT_PACKAGES += \
+    update_engine \
+    update_verifier
+
 PRODUCT_NAME := aosp_arm_ab
 PRODUCT_DEVICE := generic_arm_ab
 PRODUCT_BRAND := Android
diff --git a/target/product/aosp_mips.mk b/target/product/aosp_mips.mk
deleted file mode 100644
index 5ee6185..0000000
--- a/target/product/aosp_mips.mk
+++ /dev/null
@@ -1,31 +0,0 @@
-#
-# Copyright 2017 The Android Open-Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-PRODUCT_PROPERTY_OVERRIDES += \
-	rild.libpath=/vendor/lib/libreference-ril.so
-
-# Note: the following lines need to stay at the beginning so that it can
-# take priority  and override the rules it inherit from other mk files
-# see copy file rules in core/Makefile
-PRODUCT_COPY_FILES += \
-    development/sys-img/advancedFeatures.ini.arm:advancedFeatures.ini \
-    prebuilts/qemu-kernel/mips/3.18/kernel-qemu2:kernel-ranchu \
-    device/generic/goldfish/fstab.ranchu.mips:root/fstab.ranchu \
-    device/generic/goldfish/fstab.ranchu.early.arm:root/fstab.ranchu.early
-
-include $(SRC_TARGET_DIR)/product/full_mips.mk
-
-PRODUCT_NAME := aosp_mips
diff --git a/target/product/aosp_mips64.mk b/target/product/aosp_mips64.mk
deleted file mode 100644
index 73d3731..0000000
--- a/target/product/aosp_mips64.mk
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# Copyright 2017 The Android Open-Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-PRODUCT_PROPERTY_OVERRIDES += \
-	rild.libpath=/vendor/lib64/libreference-ril.so
-
-# This is a build configuration for a full-featured build of the
-# Open-Source part of the tree. It's geared toward a US-centric
-# build quite specifically for the emulator, and might not be
-# entirely appropriate to inherit from for on-device configurations.
-
-# Note: the following lines need to stay at the beginning so that it can
-# take priority  and override the rules it inherit from other mk files
-# see copy file rules in core/Makefile
-PRODUCT_COPY_FILES += \
-    development/sys-img/advancedFeatures.ini.arm:advancedFeatures.ini \
-    prebuilts/qemu-kernel/mips64/3.18/kernel-qemu2:kernel-ranchu \
-    device/generic/goldfish/fstab.ranchu.mips:root/fstab.ranchu \
-    device/generic/goldfish/fstab.ranchu.early.arm:root/fstab.ranchu.early
-
-$(call inherit-product, $(SRC_TARGET_DIR)/product/core_64_bit.mk)
-$(call inherit-product, $(SRC_TARGET_DIR)/product/aosp_base_telephony.mk)
-$(call inherit-product, $(SRC_TARGET_DIR)/board/generic_mips64/device.mk)
-
-include $(SRC_TARGET_DIR)/product/emulator.mk
-
-# Overrides
-PRODUCT_NAME := aosp_mips64
-PRODUCT_DEVICE := generic_mips64
-PRODUCT_BRAND := Android
-PRODUCT_MODEL := AOSP on MIPS64 Emulator
diff --git a/target/product/aosp_x86.mk b/target/product/aosp_x86.mk
index 9ba9523..da31e24 100644
--- a/target/product/aosp_x86.mk
+++ b/target/product/aosp_x86.mk
@@ -14,15 +14,35 @@
 # limitations under the License.
 #
 
--include device/generic/goldfish/x86-vendor.mk
+# The system image of aosp_x86-userdebug is a GSI for the devices with:
+# - x86 32 bits user space
+# - 64 bits binder interface
+# - system-as-root
+# - VNDK enforcement
+# - compatible property override enabled
 
-# TODO(b/78308559): includes vr_hwc into GSI before vr_hwc move to vendor
-PRODUCT_PACKAGES += \
-    vr_hwc
+-include device/generic/goldfish/x86-vendor.mk
 
 include $(SRC_TARGET_DIR)/product/full_x86.mk
 
+# Enable dynamic partition size
+PRODUCT_USE_DYNAMIC_PARTITION_SIZE := true
+
+# Enable A/B update
+AB_OTA_UPDATER := true
+AB_OTA_PARTITIONS := system
+PRODUCT_PACKAGES += \
+    update_engine \
+    update_verifier
+
 # Needed by Pi newly launched device to pass VtsTrebleSysProp on GSI
 PRODUCT_COMPATIBLE_PROPERTY_OVERRIDE := true
 
+# GSI specific tasks on boot
+PRODUCT_COPY_FILES += \
+    build/make/target/product/vndk/init.gsi.rc:system/etc/init/init.gsi.rc
+
+# Support addtional P vendor interface
+PRODUCT_EXTRA_VNDK_VERSIONS := 28
+
 PRODUCT_NAME := aosp_x86
diff --git a/target/product/aosp_x86_64.mk b/target/product/aosp_x86_64.mk
index 7afc782..4ce40cc 100644
--- a/target/product/aosp_x86_64.mk
+++ b/target/product/aosp_x86_64.mk
@@ -14,6 +14,13 @@
 # limitations under the License.
 #
 
+# The system image of aosp_x86_64-userdebug is a GSI for the devices with:
+# - x86 64 bits user space
+# - 64 bits binder interface
+# - system-as-root
+# - VNDK enforcement
+# - compatible property override enabled
+
 # This is a build configuration for a full-featured build of the
 # Open-Source part of the tree. It's geared toward a US-centric
 # build quite specifically for the emulator, and might not be
@@ -29,18 +36,31 @@
 PRODUCT_COPY_FILES += \
     system/core/rootdir/init.zygote32_64.rc:root/init.zygote32_64.rc
 
-# TODO(b/78308559): includes vr_hwc into GSI before vr_hwc move to vendor
-PRODUCT_PACKAGES += \
-    vr_hwc
-
 $(call inherit-product, $(SRC_TARGET_DIR)/product/emulator.mk)
 $(call inherit-product, $(SRC_TARGET_DIR)/product/core_64_bit.mk)
 $(call inherit-product, $(SRC_TARGET_DIR)/product/aosp_base_telephony.mk)
 $(call inherit-product, $(SRC_TARGET_DIR)/board/generic_x86_64/device.mk)
 
+# Enable dynamic partition size
+PRODUCT_USE_DYNAMIC_PARTITION_SIZE := true
+
+# Enable A/B update
+AB_OTA_UPDATER := true
+AB_OTA_PARTITIONS := system
+PRODUCT_PACKAGES += \
+    update_engine \
+    update_verifier
+
 # Needed by Pi newly launched device to pass VtsTrebleSysProp on GSI
 PRODUCT_COMPATIBLE_PROPERTY_OVERRIDE := true
 
+# GSI specific tasks on boot
+PRODUCT_COPY_FILES += \
+    build/make/target/product/vndk/init.gsi.rc:system/etc/init/init.gsi.rc
+
+# Support addtional P vendor interface
+PRODUCT_EXTRA_VNDK_VERSIONS := 28
+
 ifdef NET_ETH0_STARTONBOOT
   PRODUCT_PROPERTY_OVERRIDES += net.eth0.startonboot=1
 endif
diff --git a/target/product/aosp_x86_64_ab.mk b/target/product/aosp_x86_64_ab.mk
index 3524dbc..d9163d7 100644
--- a/target/product/aosp_x86_64_ab.mk
+++ b/target/product/aosp_x86_64_ab.mk
@@ -19,8 +19,20 @@
 # on the generic system image, place them in build/make/target/board/
 # treble_system.prop.
 
+# aosp_x86_64_ab-userdebug is a Legacy GSI for the devices with:
+# - x86 64 bits user space
+# - 64 bits binder interface
+# - system-as-root
+
 include build/make/target/product/treble_common_64.mk
 
+# Enable A/B update
+AB_OTA_UPDATER := true
+AB_OTA_PARTITIONS := system
+PRODUCT_PACKAGES += \
+    update_engine \
+    update_verifier
+
 PRODUCT_NAME := aosp_x86_64_ab
 PRODUCT_DEVICE := generic_x86_64_ab
 PRODUCT_BRAND := Android
diff --git a/target/product/aosp_x86_ab.mk b/target/product/aosp_x86_ab.mk
index e72b38d..4fff3d1 100644
--- a/target/product/aosp_x86_ab.mk
+++ b/target/product/aosp_x86_ab.mk
@@ -19,8 +19,20 @@
 # on the generic system image, place them in build/make/target/board/
 # treble_system.prop.
 
+# aosp_x86_ab-userdebug is a Legacy GSI for the devices with:
+# - x86 32 bits user space
+# - 32 bits binder interface
+# - system-as-root
+
 include build/make/target/product/treble_common_32.mk
 
+# Enable A/B update
+AB_OTA_UPDATER := true
+AB_OTA_PARTITIONS := system
+PRODUCT_PACKAGES += \
+    update_engine \
+    update_verifier
+
 PRODUCT_NAME := aosp_x86_ab
 PRODUCT_DEVICE := generic_x86_ab
 PRODUCT_BRAND := Android
diff --git a/target/product/aosp_x86_arm.mk b/target/product/aosp_x86_arm.mk
index 19f57e8..b921c97 100644
--- a/target/product/aosp_x86_arm.mk
+++ b/target/product/aosp_x86_arm.mk
@@ -17,27 +17,32 @@
 
 # aosp_x86 with arm libraries needed by binary translation.
 
+# The system image of aosp_x86-userdebug is a GSI for the devices with:
+# - x86 32 bits user space
+# - 64 bits binder interface
+# - system-as-root
+# - VNDK enforcement
+# - compatible property override enabled
+
+-include device/generic/goldfish/x86-vendor.mk
+
 include $(SRC_TARGET_DIR)/product/full_x86.mk
 
-# arm libraries. This is the list of shared libraries included in the NDK.
-# Their dependency libraries will be automatically pulled in.
+# Enable dynamic partition size
+PRODUCT_USE_DYNAMIC_PARTITION_SIZE := true
+
+# Enable A/B update
+AB_OTA_UPDATER := true
+AB_OTA_PARTITIONS := system
 PRODUCT_PACKAGES += \
-  libandroid_arm \
-  libaaudio_arm \
-  libc_arm \
-  libdl_arm \
-  libEGL_arm \
-  libGLESv1_CM_arm \
-  libGLESv2_arm \
-  libGLESv3_arm \
-  libjnigraphics_arm \
-  liblog_arm \
-  libm_arm \
-  libmediandk_arm \
-  libOpenMAXAL_arm \
-  libstdc++_arm \
-  libOpenSLES_arm \
-  libz_arm \
+    update_engine \
+    update_verifier
+
+# Needed by Pi newly launched device to pass VtsTrebleSysProp on GSI
+PRODUCT_COMPATIBLE_PROPERTY_OVERRIDE := true
+
+# Support addtional P vendor interface
+PRODUCT_EXTRA_VNDK_VERSIONS := 28
 
 PRODUCT_NAME := aosp_x86_arm
 PRODUCT_DEVICE := generic_x86_arm
diff --git a/target/product/base.mk b/target/product/base.mk
index bc3710c..1ecbf4a 100644
--- a/target/product/base.mk
+++ b/target/product/base.mk
@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2012 The Android Open Source Project
+# Copyright (C) 2018 The Android Open-Source Project
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
@@ -14,175 +14,7 @@
 # limitations under the License.
 #
 
-# Base modules (will move elsewhere, previously user tagged)
-PRODUCT_PACKAGES += \
-    20-dns.conf \
-    95-configured \
-    org.apache.http.legacy.boot \
-    appwidget \
-    appops \
-    am \
-    android.policy \
-    android.test.base \
-    android.test.mock \
-    android.test.runner \
-    app_process \
-    applypatch \
-    audioserver \
-    bit \
-    blkid \
-    bmgr \
-    bpfloader \
-    bugreport \
-    bugreportz \
-    cameraserver \
-    content \
-    dnsmasq \
-    dpm \
-    framework \
-    framework-sysconfig.xml \
-    fsck_msdos \
-    hid \
-    ime \
-    incidentd \
-    incident \
-    incident_helper \
-    incident_report \
-    input \
-    javax.obex \
-    libandroid \
-    libandroid_runtime \
-    libandroid_servers \
-    libaudioeffect_jni \
-    libaudioflinger \
-    libaudiopolicyservice \
-    libaudiopolicymanager \
-    libbundlewrapper \
-    libcamera_client \
-    libcameraservice \
-    libcamera2ndk \
-    libdl \
-    libdrmclearkeyplugin \
-    libdynproc \
-    libclearkeycasplugin \
-    libeffectproxy \
-    libeffects \
-    libinput \
-    libinputflinger \
-    libiprouteutil \
-    libjnigraphics \
-    libldnhncr \
-    libmedia \
-    libmedia_jni \
-    libmediaplayerservice \
-    libmtp \
-    libnetd_client \
-    libnetlink \
-    libnetutils \
-    libpdfium \
-    libradio_metadata \
-    libreference-ril \
-    libreverbwrapper \
-    libril \
-    librtp_jni \
-    libsensorservice \
-    libskia \
-    libsonic \
-    libsonivox \
-    libsoundpool \
-    libsoundtrigger \
-    libsoundtriggerservice \
-    libsqlite \
-    libstagefright \
-    libstagefright_amrnb_common \
-    libstagefright_avc_common \
-    libstagefright_enc_common \
-    libstagefright_foundation \
-    libstagefright_omx \
-    libstagefright_yuv \
-    libusbhost \
-    libutils \
-    libvisualizer \
-    libvorbisidec \
-    libmediandk \
-    libvulkan \
-    libwifi-service \
-    locksettings \
-    media \
-    media_cmd \
-    mediadrmserver \
-    mediaserver \
-    mediametrics \
-    mediaextractor \
-    monkey \
-    mtpd \
-    ndc \
-    netd \
-    perfetto \
-    ping \
-    ping6 \
-    platform.xml \
-    privapp-permissions-platform.xml \
-    pppd \
-    pm \
-    racoon \
-    run-as \
-    schedtest \
-    sdcard \
-    secdiscard \
-    services \
-    settings \
-    sgdisk \
-    sm \
-    statsd \
-    svc \
-    tc \
-    telecom \
-    traced \
-    traced_probes \
-    vdc \
-    vold \
-    wm
-
-# Add the compatibility library that is needed when org.apache.http.legacy
-# is removed from the bootclasspath.
-ifeq ($(REMOVE_OAHL_FROM_BCP),true)
-PRODUCT_PACKAGES += framework-oahl-backward-compatibility
-endif
-
-# Add the compatibility library that is needed when android.test.base
-# is removed from the bootclasspath.
-ifeq ($(REMOVE_ATB_FROM_BCP),true)
-PRODUCT_PACKAGES += framework-atb-backward-compatibility
-endif
-
-# Essential HAL modules
-PRODUCT_PACKAGES += \
-    android.hardware.cas@1.0-service \
-    android.hardware.media.omx@1.0-service
-
-# XML schema files
-PRODUCT_PACKAGES += \
-    media_profiles_V1_0.dtd
-
-# Packages included only for eng or userdebug builds, previously debug tagged
-PRODUCT_PACKAGES_DEBUG := \
-    logpersist.start \
-    perfprofd \
-    sqlite3 \
-    strace
-
-PRODUCT_COPY_FILES := $(call add-to-product-copy-files-if-exists,\
-    frameworks/base/config/preloaded-classes:system/etc/preloaded-classes)
-
-# Note: it is acceptable to not have a compiled-classes file. In that case, all boot classpath
-#       classes will be compiled.
-PRODUCT_COPY_FILES += $(call add-to-product-copy-files-if-exists,\
-    frameworks/base/config/compiled-classes:system/etc/compiled-classes)
-
-# Note: it is acceptable to not have a dirty-image-objects file. In that case, the special bin
-#       for known dirty objects in the image will be empty.
-PRODUCT_COPY_FILES += $(call add-to-product-copy-files-if-exists,\
-    frameworks/base/config/dirty-image-objects:system/etc/dirty-image-objects)
-
-$(call inherit-product, $(SRC_TARGET_DIR)/product/embedded.mk)
+# This makefile is suitable to inherit by products that don't need to be split
+# up by partition.
+$(call inherit-product, $(SRC_TARGET_DIR)/product/base_system.mk)
+$(call inherit-product, $(SRC_TARGET_DIR)/product/base_vendor.mk)
diff --git a/target/product/base_system.mk b/target/product/base_system.mk
new file mode 100644
index 0000000..3d5c512
--- /dev/null
+++ b/target/product/base_system.mk
@@ -0,0 +1,352 @@
+#
+# Copyright (C) 2018 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# Base modules and settings for the system partition.
+PRODUCT_PACKAGES += \
+    adb \
+    adbd \
+    am \
+    android.hidl.allocator@1.0-service \
+    android.hidl.base-V1.0-java \
+    android.hidl.manager-V1.0-java \
+    android.hidl.memory@1.0-impl \
+    android.hidl.memory@1.0-impl.vendor \
+    android.system.suspend@1.0-service \
+    android.test.base \
+    android.test.mock \
+    android.test.runner \
+    apexd \
+    applypatch \
+    appops \
+    app_process \
+    appwidget \
+    atest \
+    atrace \
+    audioserver \
+    BackupRestoreConfirmation \
+    bcc \
+    bit \
+    blank_screen \
+    blkid \
+    bmgr \
+    bootanimation \
+    bootstat \
+    bpfloader \
+    bu \
+    bugreport \
+    bugreportz \
+    cameraserver \
+    charger \
+    cmd \
+    com.android.location.provider \
+    com.android.resolv \
+    com.android.tzdata \
+    ContactsProvider \
+    content \
+    crash_dump \
+    CtsShimPrebuilt \
+    CtsShimPrivPrebuilt \
+    debuggerd\
+    DefaultContainerService \
+    dnsmasq \
+    DownloadProvider \
+    dpm \
+    dumpstate \
+    dumpsys \
+    e2fsck \
+    ExtServices \
+    ExtShared \
+    fastboot \
+    flags_health_check \
+    framework \
+    framework-res \
+    framework-sysconfig.xml \
+    fsck_msdos \
+    fs_config_files_system \
+    fs_config_dirs_system \
+    heapprofd \
+    heapprofd_client \
+    gatekeeperd \
+    gpuservice \
+    healthd \
+    hid \
+    hwservicemanager \
+    idmap \
+    ime \
+    ims-common \
+    incident \
+    incidentd \
+    incident_helper \
+    incident_report \
+    init.environ.rc \
+    init.rc \
+    init_system \
+    input \
+    installd \
+    iorapd \
+    ip \
+    ip6tables \
+    iptables \
+    ip-up-vpn \
+    javax.obex \
+    keystore \
+    ld.config.txt \
+    ld.mc \
+    libaaudio \
+    libandroid \
+    libandroidfw \
+    libandroid_runtime \
+    libandroid_servers \
+    libaudioeffect_jni \
+    libaudioflinger \
+    libaudiopolicymanager \
+    libaudiopolicyservice \
+    libaudioutils \
+    libbinder \
+    libbinder_ndk \
+    libc \
+    libcamera2ndk \
+    libcamera_client \
+    libcameraservice \
+    libc_malloc_debug \
+    libc_malloc_hooks \
+    libcutils \
+    libdl \
+    libdrmframework \
+    libdrmframework_jni \
+    libEGL \
+    libETC1 \
+    libFFTEm \
+    libfilterfw \
+    libgatekeeper \
+    libGLESv1_CM \
+    libGLESv2 \
+    libGLESv3 \
+    libgui \
+    libhardware \
+    libhardware_legacy \
+    libinput \
+    libinputflinger \
+    libiprouteutil \
+    libjnigraphics \
+    libjpeg \
+    liblog \
+    libm \
+    libmdnssd \
+    libmedia \
+    libmedia_jni \
+    libmediandk \
+    libmediaplayerservice \
+    libmtp \
+    libnetd_client \
+    libnetlink \
+    libnetutils \
+    libneuralnetworks \
+    libOpenMAXAL \
+    libOpenSLES \
+    libpdfium \
+    libpixelflinger \
+    libpower \
+    libpowermanager \
+    libradio_metadata \
+    librtp_jni \
+    libsensorservice \
+    libsigchain \
+    libskia \
+    libsonic \
+    libsonivox \
+    libsoundpool \
+    libsoundtrigger \
+    libsoundtriggerservice \
+    libspeexresampler \
+    libsqlite \
+    libstagefright \
+    libstagefright_amrnb_common \
+    libstagefright_enc_common \
+    libstagefright_foundation \
+    libstagefright_omx \
+    libstdc++ \
+    libsurfaceflinger \
+    libsurfaceflinger_ddmconnection \
+    libsysutils \
+    libui \
+    libusbhost \
+    libutils \
+    libvorbisidec \
+    libvulkan \
+    libwifi-service \
+    libwilhelm \
+    linker \
+    lmkd \
+    locksettings \
+    logcat \
+    logd \
+    lshal \
+    mdnsd \
+    media \
+    media_cmd \
+    mediadrmserver \
+    mediaextractor \
+    mediametrics \
+    media_profiles_V1_0.dtd \
+    MediaProvider \
+    mediaserver \
+    mke2fs \
+    monkey \
+    mtpd \
+    ndc \
+    netd \
+    org.apache.http.legacy \
+    perfetto \
+    ping \
+    ping6 \
+    platform.xml \
+    pm \
+    pppd \
+    privapp-permissions-platform.xml \
+    racoon \
+    recovery-persist \
+    resize2fs \
+    run-as \
+    schedtest \
+    screencap \
+    sdcard \
+    secdiscard \
+    SecureElement \
+    selinux_policy_system \
+    sensorservice \
+    service \
+    servicemanager \
+    services \
+    settings \
+    SettingsProvider \
+    sgdisk \
+    Shell \
+    shell_and_utilities_system \
+    sm \
+    statsd \
+    storaged \
+    surfaceflinger \
+    svc \
+    tc \
+    telecom \
+    telephony-common \
+    thermalserviced \
+    tombstoned \
+    traced \
+    traced_probes \
+    tune2fs \
+    tzdatacheck \
+    uiautomator \
+    uncrypt \
+    usbd \
+    vdc \
+    voip-common \
+    vold \
+    WallpaperBackup \
+    watchdogd \
+    wificond \
+    wifi-service \
+    wm \
+
+# VINTF data for system image
+PRODUCT_PACKAGES += \
+    framework_manifest.xml \
+    framework_compatibility_matrix.xml \
+
+ifeq ($(TARGET_CORE_JARS),)
+$(error TARGET_CORE_JARS is empty; cannot initialize PRODUCT_BOOT_JARS variable)
+endif
+
+# The order matters
+PRODUCT_BOOT_JARS := \
+    $(TARGET_CORE_JARS) \
+    ext \
+    framework \
+    telephony-common \
+    voip-common \
+    ims-common
+
+# Add the compatibility library that is needed when org.apache.http.legacy
+# is removed from the bootclasspath.
+ifeq ($(REMOVE_OAHL_FROM_BCP),true)
+PRODUCT_PACKAGES += framework-oahl-backward-compatibility
+PRODUCT_BOOT_JARS += framework-oahl-backward-compatibility
+else
+PRODUCT_BOOT_JARS += org.apache.http.legacy.impl
+endif
+
+PRODUCT_COPY_FILES += \
+    system/core/rootdir/init.usb.rc:root/init.usb.rc \
+    system/core/rootdir/init.usb.configfs.rc:root/init.usb.configfs.rc \
+    system/core/rootdir/ueventd.rc:root/ueventd.rc \
+    system/core/rootdir/etc/hosts:system/etc/hosts
+
+# Add the compatibility library that is needed when android.test.base
+# is removed from the bootclasspath.
+ifeq ($(REMOVE_ATB_FROM_BCP),true)
+PRODUCT_PACKAGES += framework-atb-backward-compatibility
+PRODUCT_BOOT_JARS += framework-atb-backward-compatibility
+else
+PRODUCT_BOOT_JARS += android.test.base.impl
+endif
+
+PRODUCT_COPY_FILES += system/core/rootdir/init.zygote32.rc:root/init.zygote32.rc
+PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.zygote=zygote32
+
+PRODUCT_SYSTEM_DEFAULT_PROPERTIES += debug.atrace.tags.enableflags=0
+
+# Packages included only for eng or userdebug builds, previously debug tagged
+PRODUCT_PACKAGES_DEBUG := \
+    adb_keys \
+    apex.test.key \
+    arping \
+    com.android.apex.test_package.key \
+    com.android.apex.test_package.preinstall.key \
+    iotop \
+    iw \
+    logpersist.start \
+    perfprofd \
+    procrank \
+    showmap \
+    sqlite3 \
+    ss \
+    strace \
+    sanitizer-status \
+    tracepath \
+    tracepath6 \
+    traceroute6 \
+    unwind_info \
+    unwind_reg_info \
+    unwind_symbols \
+
+# The set of packages whose code can be loaded by the system server.
+PRODUCT_SYSTEM_SERVER_APPS += \
+    SettingsProvider \
+    WallpaperBackup
+
+# Packages included only for eng/userdebug builds, when building with SANITIZE_TARGET=address
+PRODUCT_PACKAGES_DEBUG_ASAN :=
+
+PRODUCT_COPY_FILES += $(call add-to-product-copy-files-if-exists,\
+    frameworks/base/config/preloaded-classes:system/etc/preloaded-classes)
+
+# Note: it is acceptable to not have a dirty-image-objects file. In that case, the special bin
+#       for known dirty objects in the image will be empty.
+PRODUCT_COPY_FILES += $(call add-to-product-copy-files-if-exists,\
+    frameworks/base/config/dirty-image-objects:system/etc/dirty-image-objects)
+
+$(call inherit-product, $(SRC_TARGET_DIR)/product/runtime_libart.mk)
diff --git a/target/product/base_vendor.mk b/target/product/base_vendor.mk
new file mode 100644
index 0000000..9bb45d1
--- /dev/null
+++ b/target/product/base_vendor.mk
@@ -0,0 +1,59 @@
+#
+# Copyright (C) 2018 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# Base modules and settings for recovery.
+PRODUCT_PACKAGES += \
+    adbd.recovery \
+    android.hardware.health@2.0-impl-default.recovery \
+    init_second_stage.recovery \
+    ld.config.recovery.txt \
+    linker.recovery \
+    recovery \
+    shell_and_utilities_recovery \
+    watchdogd.recovery \
+
+# Base modules and settings for the vendor partition.
+PRODUCT_PACKAGES += \
+    android.hardware.cas@1.0-service \
+    android.hardware.configstore@1.1-service \
+    android.hardware.media.omx@1.0-service \
+    fs_config_files_nonsystem \
+    fs_config_dirs_nonsystem \
+    gralloc.default \
+    group \
+    init_vendor \
+    libbundlewrapper \
+    libclearkeycasplugin \
+    libdownmix \
+    libdrmclearkeyplugin \
+    libdynproc \
+    libeffectproxy \
+    libeffects \
+    libldnhncr \
+    libreference-ril \
+    libreverbwrapper \
+    libril \
+    libvisualizer \
+    passwd \
+    selinux_policy_nonsystem \
+    shell_and_utilities_vendor \
+    vndservice \
+    vndservicemanager \
+
+# VINTF data for vendor image
+PRODUCT_PACKAGES += \
+    device_manifest.xml \
+    device_compatibility_matrix.xml \
diff --git a/target/product/core.mk b/target/product/core.mk
deleted file mode 100644
index c72bb2f..0000000
--- a/target/product/core.mk
+++ /dev/null
@@ -1,77 +0,0 @@
-#
-# Copyright (C) 2007 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-# Base configuration for communication-oriented android devices
-# (phones, tablets, etc.).  If you want a change to apply to ALMOST ALL
-# devices (including non-phones and non-tablets), modify
-# core_minimal.mk instead. If you care about wearables, you need to modify
-# core_tiny.mk in addition to core_minimal.mk.
-
-PRODUCT_PACKAGES += \
-    BasicDreams \
-    BlockedNumberProvider \
-    BookmarkProvider \
-    Browser2 \
-    BuiltInPrintService \
-    Calendar \
-    CalendarProvider \
-    CaptivePortalLogin \
-    CertInstaller \
-    Contacts \
-    DeskClock \
-    DocumentsUI \
-    DownloadProviderUi \
-    Email \
-    ExactCalculator \
-    ExternalStorageProvider \
-    FusedLocation \
-    InputDevices \
-    KeyChain \
-    Keyguard \
-    LatinIME \
-    Launcher3QuickStep \
-    ManagedProvisioning \
-    MtpDocumentsProvider \
-    PacProcessor \
-    libpac \
-    PrintSpooler \
-    PrintRecommendationService \
-    ProxyHandler \
-    QuickSearchBox \
-    SecureElement \
-    Settings \
-    SettingsIntelligence \
-    SharedStorageBackup \
-    SimAppDialog \
-    StorageManager \
-    Telecom \
-    TeleService \
-    Traceur \
-    VpnDialogs \
-    vr \
-    MmsService
-
-# The set of packages whose code can be loaded by the system server.
-PRODUCT_SYSTEM_SERVER_APPS += \
-    FusedLocation \
-    InputDevices \
-    KeyChain \
-    Telecom \
-
-# The set of packages we want to force 'speed' compilation on.
-PRODUCT_DEXPREOPT_SPEED_APPS += \
-
-$(call inherit-product, $(SRC_TARGET_DIR)/product/core_base.mk)
diff --git a/target/product/core_base.mk b/target/product/core_base.mk
deleted file mode 100644
index 7dc0010..0000000
--- a/target/product/core_base.mk
+++ /dev/null
@@ -1,65 +0,0 @@
-#
-# Copyright (C) 2013 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# Note that components added here will be also shared in PDK. Components
-# that should not be in PDK should be added in lower level like core.mk.
-
-PRODUCT_PROPERTY_OVERRIDES := \
-    ro.config.notification_sound=OnTheHunt.ogg \
-    ro.config.alarm_alert=Alarm_Classic.ogg
-
-PRODUCT_PACKAGES += \
-    ContactsProvider \
-    DefaultContainerService \
-    Home \
-    TelephonyProvider \
-    UserDictionaryProvider \
-    atrace \
-    libandroidfw \
-    libaudiopreprocessing \
-    libaudioutils \
-    libfilterpack_imageproc \
-    libgabi++ \
-    libmdnssd \
-    libnfc_ndef \
-    libpowermanager \
-    libspeexresampler \
-    libstagefright_soft_aacdec \
-    libstagefright_soft_aacenc \
-    libstagefright_soft_amrdec \
-    libstagefright_soft_amrnbenc \
-    libstagefright_soft_amrwbenc \
-    libstagefright_soft_avcdec \
-    libstagefright_soft_avcenc \
-    libstagefright_soft_flacdec \
-    libstagefright_soft_flacenc \
-    libstagefright_soft_g711dec \
-    libstagefright_soft_gsmdec \
-    libstagefright_soft_hevcdec \
-    libstagefright_soft_mp3dec \
-    libstagefright_soft_mpeg2dec \
-    libstagefright_soft_mpeg4dec \
-    libstagefright_soft_mpeg4enc \
-    libstagefright_soft_opusdec \
-    libstagefright_soft_rawdec \
-    libstagefright_soft_vorbisdec \
-    libstagefright_soft_vpxdec \
-    libstagefright_soft_vpxenc \
-    libvariablespeed \
-    libwebrtc_audio_preprocessing \
-    mdnsd \
-    requestsync \
-
-$(call inherit-product, $(SRC_TARGET_DIR)/product/core_minimal.mk)
diff --git a/target/product/core_minimal.mk b/target/product/core_minimal.mk
index 85646c1..b432a91 100644
--- a/target/product/core_minimal.mk
+++ b/target/product/core_minimal.mk
@@ -14,171 +14,16 @@
 # limitations under the License.
 #
 
-# Base configuration for most consumer android devices.  Do not put
-# things that are specific to communication devices (phones, tables,
-# etc.) here -- for that, use core.mk.
+# This product is the base of a generic media-capable device, which
+# means most android products, but excludes wearables.
+#
+# Note: Do not add any contents directly to this file. Choose either
+# media_system or media_vendor depending on partition (also consider
+# base_<x>.mk or handheld_<x>.mk.
+
+$(call inherit-product, $(SRC_TARGET_DIR)/product/media_system.mk)
+$(call inherit-product, $(SRC_TARGET_DIR)/product/media_vendor.mk)
 
 PRODUCT_BRAND := generic
 PRODUCT_DEVICE := generic
 PRODUCT_NAME := core
-
-PRODUCT_PACKAGES += \
-    BackupRestoreConfirmation \
-    CompanionDeviceManager \
-    CtsShimPrebuilt \
-    CtsShimPrivPrebuilt \
-    DownloadProvider \
-    ExtShared \
-    ExtServices \
-    HTMLViewer \
-    MediaProvider \
-    PackageInstaller \
-    SecureElement \
-    SettingsProvider \
-    Shell \
-    StatementService \
-    WallpaperBackup \
-    android.hidl.base-V1.0-java \
-    android.hidl.manager-V1.0-java \
-    bcc \
-    bu \
-    com.android.future.usb.accessory \
-    com.android.location.provider \
-    com.android.location.provider.xml \
-    com.android.media.remotedisplay \
-    com.android.media.remotedisplay.xml \
-    com.android.mediadrm.signer \
-    com.android.mediadrm.signer.xml \
-    drmserver \
-    ethernet-service \
-    framework-res \
-    idmap \
-    installd \
-    ims-common \
-    ip \
-    ip-up-vpn \
-    ip6tables \
-    iptables \
-    gatekeeperd \
-    keystore \
-    ld.config.txt \
-    ld.mc \
-    libaaudio \
-    libOpenMAXAL \
-    libOpenSLES \
-    libdownmix \
-    libdrmframework \
-    libdrmframework_jni \
-    libfilterfw \
-    libkeystore \
-    libgatekeeper \
-    libneuralnetworks \
-    libwebviewchromium_loader \
-    libwebviewchromium_plat_support \
-    libwilhelm \
-    logd \
-    mke2fs \
-    e2fsck \
-    resize2fs \
-    tune2fs \
-    screencap \
-    sensorservice \
-    telephony-common \
-    uiautomator \
-    uncrypt \
-    vndk_snapshot_package \
-    voip-common \
-    webview \
-    webview_zygote \
-
-# Wifi modules
-PRODUCT_PACKAGES += \
-    wifi-service \
-    wificond \
-
-PRODUCT_COPY_FILES += \
-    frameworks/native/data/etc/android.software.webview.xml:system/etc/permissions/android.software.webview.xml
-
-ifneq (REL,$(PLATFORM_VERSION_CODENAME))
-PRODUCT_COPY_FILES += \
-    frameworks/native/data/etc/android.software.preview_sdk.xml:system/etc/permissions/android.software.preview_sdk.xml
-endif
-
-ifeq ($(TARGET_CORE_JARS),)
-$(error TARGET_CORE_JARS is empty; cannot initialize PRODUCT_BOOT_JARS variable)
-endif
-
-# The order of PRODUCT_BOOT_JARS matters.
-PRODUCT_BOOT_JARS := \
-    $(TARGET_CORE_JARS) \
-    ext \
-    framework \
-    telephony-common \
-    voip-common \
-    ims-common \
-    android.hidl.base-V1.0-java \
-    android.hidl.manager-V1.0-java
-
-ifeq ($(REMOVE_OAHL_FROM_BCP),true)
-PRODUCT_BOOT_JARS += framework-oahl-backward-compatibility
-else
-PRODUCT_BOOT_JARS += org.apache.http.legacy.boot
-endif
-
-ifeq ($(REMOVE_ATB_FROM_BCP),true)
-PRODUCT_BOOT_JARS += framework-atb-backward-compatibility
-else
-PRODUCT_BOOT_JARS += android.test.base
-endif
-
-# The order of PRODUCT_SYSTEM_SERVER_JARS matters.
-PRODUCT_SYSTEM_SERVER_JARS := \
-    services \
-    ethernet-service \
-    wifi-service \
-    com.android.location.provider \
-
-# The set of packages whose code can be loaded by the system server.
-PRODUCT_SYSTEM_SERVER_APPS += \
-    SettingsProvider \
-    WallpaperBackup
-
-# Adoptable external storage supports both ext4 and f2fs
-PRODUCT_PACKAGES += \
-    e2fsck \
-    mke2fs \
-    fsck.f2fs \
-    make_f2fs \
-
-PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \
-    ro.zygote=zygote32
-PRODUCT_COPY_FILES += \
-    system/core/rootdir/init.zygote32.rc:root/init.zygote32.rc
-
-PRODUCT_COPY_FILES += \
-    system/core/rootdir/etc/public.libraries.android.txt:system/etc/public.libraries.txt
-
-# Enable boot.oat filtering of compiled classes to reduce boot.oat size. b/28026683
-PRODUCT_COPY_FILES += $(call add-to-product-copy-files-if-exists,\
-    frameworks/base/config/compiled-classes-phone:system/etc/compiled-classes)
-
-# Enable dirty image object binning to reduce dirty pages in the image.
-PRODUCT_COPY_FILES += $(call add-to-product-copy-files-if-exists,\
-    frameworks/base/dirty-image-objects-phone:system/etc/dirty-image-objects)
-
-# On userdebug builds, collect more tombstones by default.
-ifneq (,$(filter userdebug eng,$(TARGET_BUILD_VARIANT)))
-PRODUCT_SYSTEM_DEFAULT_PROPERTIES += \
-    tombstoned.max_tombstone_count=50
-endif
-
-PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \
-    ro.logd.size.stats=64K \
-    log.tag.stats_log=I
-
-$(call inherit-product, $(SRC_TARGET_DIR)/product/runtime_libart.mk)
-$(call inherit-product, $(SRC_TARGET_DIR)/product/base.mk)
-
-# Enable CFI for security-sensitive components
-$(call inherit-product, $(SRC_TARGET_DIR)/product/cfi-common.mk)
-$(call inherit-product-if-exists, vendor/google/products/cfi-vendor.mk)
diff --git a/target/product/core_tiny.mk b/target/product/core_tiny.mk
deleted file mode 100644
index 4ef7b48..0000000
--- a/target/product/core_tiny.mk
+++ /dev/null
@@ -1,150 +0,0 @@
-#
-# Copyright (C) 2013 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# Tiny configuration for small devices such as wearables. Includes base and embedded.
-# No telephony
-
-PRODUCT_PACKAGES := \
-    Bluetooth \
-    CalendarProvider \
-    ContactsProvider \
-    CertInstaller \
-    FusedLocation \
-    InputDevices
-
-PRODUCT_PACKAGES += \
-    clatd \
-    clatd.conf \
-    pppd
-
-PRODUCT_PACKAGES += \
-    audio.primary.default \
-    local_time.default \
-    power.default
-
-PRODUCT_PACKAGES += \
-    BackupRestoreConfirmation \
-    CtsShimPrebuilt \
-    CtsShimPrivPrebuilt \
-    DefaultContainerService \
-    ExtShared \
-    ExtServices \
-    SecureElement \
-    SettingsProvider \
-    Shell \
-    WallpaperBackup \
-    android.hidl.base-V1.0-java \
-    android.hidl.manager-V1.0-java \
-    bcc \
-    bu \
-    com.android.location.provider \
-    com.android.location.provider.xml \
-    framework-res \
-    installd \
-    ims-common \
-    ip \
-    ip-up-vpn \
-    ip6tables \
-    iptables \
-    gatekeeperd \
-    keystore \
-    ld.config.txt \
-    ld.mc \
-    libaaudio \
-    libOpenMAXAL \
-    libOpenSLES \
-    libdownmix \
-    libfilterfw \
-    libgatekeeper \
-    libkeystore \
-    libwilhelm \
-    libdrmframework_jni \
-    libdrmframework \
-    mke2fs \
-    e2fsck \
-    resize2fs \
-    tune2fs \
-    screencap \
-    sensorservice \
-    uiautomator \
-    uncrypt \
-    telephony-common \
-    voip-common \
-    logd \
-
-# Wifi modules
-PRODUCT_PACKAGES += \
-    wifi-service \
-    wificond \
-
-ifeq ($(TARGET_CORE_JARS),)
-$(error TARGET_CORE_JARS is empty; cannot initialize PRODUCT_BOOT_JARS variable)
-endif
-
-# The order matters
-PRODUCT_BOOT_JARS := \
-    $(TARGET_CORE_JARS) \
-    ext \
-    framework \
-    telephony-common \
-    voip-common \
-    ims-common \
-    android.hidl.base-V1.0-java \
-    android.hidl.manager-V1.0-java
-
-ifeq ($(REMOVE_OAHL_FROM_BCP),true)
-PRODUCT_BOOT_JARS += framework-oahl-backward-compatibility
-else
-PRODUCT_BOOT_JARS += org.apache.http.legacy.boot
-endif
-
-ifeq ($(REMOVE_ATB_FROM_BCP),true)
-PRODUCT_BOOT_JARS += framework-atb-backward-compatibility
-else
-PRODUCT_BOOT_JARS += android.test.base
-endif
-
-# The order of PRODUCT_SYSTEM_SERVER_JARS matters.
-PRODUCT_SYSTEM_SERVER_JARS := \
-    services \
-    wifi-service
-
-# The set of packages whose code can be loaded by the system server.
-PRODUCT_SYSTEM_SERVER_APPS += \
-    FusedLocation \
-    InputDevices \
-    SettingsProvider \
-    WallpaperBackup \
-
-# The set of packages we want to force 'speed' compilation on.
-PRODUCT_DEXPREOPT_SPEED_APPS := \
-
-PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \
-    ro.zygote=zygote32
-PRODUCT_COPY_FILES += \
-    system/core/rootdir/init.zygote32.rc:root/init.zygote32.rc
-
-PRODUCT_PROPERTY_OVERRIDES += \
-    ro.carrier=unknown
-
-$(call inherit-product, $(SRC_TARGET_DIR)/product/runtime_libart.mk)
-$(call inherit-product, $(SRC_TARGET_DIR)/product/base.mk)
-$(call inherit-product-if-exists, frameworks/base/data/fonts/fonts.mk)
-$(call inherit-product-if-exists, external/roboto-fonts/fonts.mk)
-
-# Overrides
-PRODUCT_BRAND := tiny
-PRODUCT_DEVICE := tiny
-PRODUCT_NAME := core_tiny
diff --git a/target/product/embedded.mk b/target/product/embedded.mk
deleted file mode 100644
index 69cf102..0000000
--- a/target/product/embedded.mk
+++ /dev/null
@@ -1,122 +0,0 @@
-#
-# Copyright (C) 2009 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-# This is a build configuration for a very minimal build of the
-# Open-Source part of the tree.
-
-PRODUCT_PACKAGES += \
-    adb \
-    adbd \
-    usbd \
-    android.hardware.configstore@1.1-service \
-    android.hidl.allocator@1.0-service \
-    android.hidl.memory@1.0-impl \
-    android.hidl.memory@1.0-impl.vendor \
-    atrace \
-    blank_screen \
-    bootanimation \
-    bootstat \
-    charger \
-    cmd \
-    crash_dump \
-    debuggerd\
-    dumpstate \
-    dumpsys \
-    fastboot \
-    gralloc.default \
-    healthd \
-    hwservicemanager \
-    init \
-    init.environ.rc \
-    init.rc \
-    libEGL \
-    libETC1 \
-    libFFTEm \
-    libGLESv1_CM \
-    libGLESv2 \
-    libGLESv3 \
-    libbinder \
-    libc \
-    libc_malloc_debug \
-    libc_malloc_hooks \
-    libcutils \
-    libdl \
-    libgui \
-    libhardware \
-    libhardware_legacy \
-    libjpeg \
-    liblog \
-    libm \
-    libpixelflinger \
-    libpower \
-    libsigchain \
-    libstdc++ \
-    libsurfaceflinger \
-    libsurfaceflinger_ddmconnection \
-    libsysutils \
-    libui \
-    libutils \
-    linker \
-    lmkd \
-    logcat \
-    lshal \
-    recovery \
-    service \
-    servicemanager \
-    shell_and_utilities \
-    storaged \
-    surfaceflinger \
-    thermalserviced \
-    tombstoned \
-    tzdatacheck \
-    vndservice \
-    vndservicemanager \
-
-# VINTF data
-PRODUCT_PACKAGES += \
-    device_compatibility_matrix.xml \
-    device_manifest.xml \
-    framework_manifest.xml \
-    framework_compatibility_matrix.xml \
-
-# SELinux packages are added as dependencies of the selinux_policy
-# phony package.
-PRODUCT_PACKAGES += \
-    selinux_policy \
-
-# AID Generation for
-# <pwd.h> and <grp.h>
-PRODUCT_PACKAGES += \
-    passwd \
-    group \
-    fs_config_files \
-    fs_config_dirs
-
-# If there are product-specific adb keys defined, install them on debuggable
-# builds.
-PRODUCT_PACKAGES_DEBUG += \
-    adb_keys
-
-# Ensure that this property is always defined so that bionic_systrace.cpp
-# can rely on it being initially set by init.
-PRODUCT_SYSTEM_DEFAULT_PROPERTIES += \
-    debug.atrace.tags.enableflags=0
-
-PRODUCT_COPY_FILES += \
-    system/core/rootdir/init.usb.rc:root/init.usb.rc \
-    system/core/rootdir/init.usb.configfs.rc:root/init.usb.configfs.rc \
-    system/core/rootdir/ueventd.rc:root/ueventd.rc \
-    system/core/rootdir/etc/hosts:system/etc/hosts
diff --git a/target/product/full.mk b/target/product/full.mk
index 7c0578c..b356f9d 100644
--- a/target/product/full.mk
+++ b/target/product/full.mk
@@ -23,6 +23,9 @@
 $(call inherit-product, $(SRC_TARGET_DIR)/product/aosp_base_telephony.mk)
 $(call inherit-product, $(SRC_TARGET_DIR)/board/generic/device.mk)
 
+# Enable dynamic partition size
+PRODUCT_USE_DYNAMIC_PARTITION_SIZE := true
+
 # Overrides
 PRODUCT_NAME := full
 PRODUCT_DEVICE := generic
diff --git a/target/product/full_base.mk b/target/product/full_base.mk
index c390ffd..447576c 100644
--- a/target/product/full_base.mk
+++ b/target/product/full_base.mk
@@ -24,13 +24,7 @@
     WAPPushManager
 
 PRODUCT_PACKAGES += \
-    Galaxy4 \
-    HoloSpiralWallpaper \
-    LiveWallpapers \
     LiveWallpapersPicker \
-    MagicSmokeWallpapers \
-    NoiseField \
-    PhaseBeam \
     PhotoTable
 
 # Bluetooth:
diff --git a/target/product/full_base_telephony.mk b/target/product/full_base_telephony.mk
index af4097d..ee59090 100644
--- a/target/product/full_base_telephony.mk
+++ b/target/product/full_base_telephony.mk
@@ -28,4 +28,5 @@
     frameworks/native/data/etc/handheld_core_hardware.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/handheld_core_hardware.xml
 
 $(call inherit-product, $(SRC_TARGET_DIR)/product/aosp_base.mk)
-$(call inherit-product, $(SRC_TARGET_DIR)/product/telephony.mk)
+$(call inherit-product, $(SRC_TARGET_DIR)/product/telephony_system.mk)
+$(call inherit-product, $(SRC_TARGET_DIR)/product/telephony_vendor.mk)
diff --git a/target/product/full_mips.mk b/target/product/full_mips.mk
deleted file mode 100644
index 61734b4..0000000
--- a/target/product/full_mips.mk
+++ /dev/null
@@ -1,31 +0,0 @@
-#
-# Copyright (C) 2009 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-# This is a build configuration for a full-featured build of the
-# Open-Source part of the tree. It's geared toward a US-centric
-# mips build quite specifically for the emulator, and might not be
-# entirely appropriate to inherit from for on-device configurations.
-
-$(call inherit-product, $(SRC_TARGET_DIR)/product/aosp_base_telephony.mk)
-$(call inherit-product, $(SRC_TARGET_DIR)/board/generic_mips/device.mk)
-
-include $(SRC_TARGET_DIR)/product/emulator.mk
-
-# Overrides
-PRODUCT_NAME := full_mips
-PRODUCT_DEVICE := generic_mips
-PRODUCT_BRAND := Android
-PRODUCT_MODEL := AOSP on MIPS Emulator
diff --git a/target/product/full_x86.mk b/target/product/full_x86.mk
index 6ea2d05..a76b07c 100644
--- a/target/product/full_x86.mk
+++ b/target/product/full_x86.mk
@@ -36,6 +36,9 @@
 	bios.bin \
 	vgabios-cirrus.bin \
 
+# Enable dynamic partition size
+PRODUCT_USE_DYNAMIC_PARTITION_SIZE := true
+
 # Overrides
 PRODUCT_NAME := full_x86
 PRODUCT_DEVICE := generic_x86
diff --git a/target/product/generic.mk b/target/product/generic.mk
index dd0d663..7a9732d 100644
--- a/target/product/generic.mk
+++ b/target/product/generic.mk
@@ -18,9 +18,15 @@
 # It includes the base Android platform.
 
 $(call inherit-product, $(SRC_TARGET_DIR)/product/generic_no_telephony.mk)
-$(call inherit-product, $(SRC_TARGET_DIR)/product/telephony.mk)
+$(call inherit-product, $(SRC_TARGET_DIR)/product/telephony_system.mk)
+$(call inherit-product, $(SRC_TARGET_DIR)/product/telephony_vendor.mk)
 
 # Overrides
 PRODUCT_BRAND := generic
 PRODUCT_DEVICE := generic
 PRODUCT_NAME := generic
+
+_whitelist := \
+  device_manifest.xml \
+
+$(call enforce-product-packages-exist,$(_whitelist))
diff --git a/target/product/generic_mips.mk b/target/product/generic_mips.mk
deleted file mode 100644
index 7b53d04..0000000
--- a/target/product/generic_mips.mk
+++ /dev/null
@@ -1,26 +0,0 @@
-#
-# Copyright (C) 2007 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-# This is a generic phone product that isn't specialized for a specific device.
-# It includes the base Android platform.
-
-$(call inherit-product, $(SRC_TARGET_DIR)/product/generic_no_telephony.mk)
-$(call inherit-product, $(SRC_TARGET_DIR)/product/telephony.mk)
-
-# Overrides
-PRODUCT_BRAND := generic_mips
-PRODUCT_DEVICE := generic_mips
-PRODUCT_NAME := generic_mips
diff --git a/target/product/generic_no_telephony.mk b/target/product/generic_no_telephony.mk
index 6a84c35..5346476 100644
--- a/target/product/generic_no_telephony.mk
+++ b/target/product/generic_no_telephony.mk
@@ -14,66 +14,15 @@
 # limitations under the License.
 #
 
-# This is a generic phone product that isn't specialized for a specific device.
-# It includes the base Android platform.
+# This product is a generic phone or tablet, that doesn't have telephony.
+#
+# Note: Do not add any contents directly to this file. Choose either
+# handheld_system or handheld_vendor depending on partition (also consider
+# base_<x>.mk or media_<x>.mk.
 
-PRODUCT_PACKAGES := \
-    Bluetooth \
-    BluetoothMidiService \
-    Camera2 \
-    Gallery2 \
-    Music \
-    MusicFX \
-    NfcNci \
-    OneTimeInitializer \
-    Provision \
-    SystemUI \
-    SysuiDarkThemeOverlay \
-    DisplayCutoutEmulationDoubleOverlay \
-    DisplayCutoutEmulationCornerOverlay \
-    DisplayCutoutEmulationTallOverlay \
-    EasterEgg \
-    WallpaperCropper
+$(call inherit-product, $(SRC_TARGET_DIR)/product/handheld_system.mk)
+$(call inherit-product, $(SRC_TARGET_DIR)/product/handheld_vendor.mk)
 
-PRODUCT_PACKAGES += \
-    clatd \
-    clatd.conf \
-    pppd \
-    screenrecord
-
-PRODUCT_PACKAGES += \
-    librs_jni \
-    libvideoeditor_jni \
-    libvideoeditor_core \
-    libvideoeditor_osal \
-    libvideoeditor_videofilters \
-    libvideoeditorplayer \
-
-PRODUCT_PACKAGES += \
-    audio.primary.default \
-    local_time.default \
-    vibrator.default \
-    power.default
-
-PRODUCT_COPY_FILES := \
-        frameworks/av/media/libeffects/data/audio_effects.conf:system/etc/audio_effects.conf
-
-PRODUCT_PROPERTY_OVERRIDES += \
-    ro.carrier=unknown
-
-$(call inherit-product-if-exists, frameworks/base/data/fonts/fonts.mk)
-$(call inherit-product-if-exists, external/google-fonts/dancing-script/fonts.mk)
-$(call inherit-product-if-exists, external/google-fonts/carrois-gothic-sc/fonts.mk)
-$(call inherit-product-if-exists, external/google-fonts/coming-soon/fonts.mk)
-$(call inherit-product-if-exists, external/google-fonts/cutive-mono/fonts.mk)
-$(call inherit-product-if-exists, external/noto-fonts/fonts.mk)
-$(call inherit-product-if-exists, external/roboto-fonts/fonts.mk)
-$(call inherit-product-if-exists, external/hyphenation-patterns/patterns.mk)
-$(call inherit-product-if-exists, frameworks/base/data/keyboards/keyboards.mk)
-$(call inherit-product-if-exists, frameworks/webview/chromium/chromium.mk)
-$(call inherit-product, $(SRC_TARGET_DIR)/product/core.mk)
-
-# Overrides
 PRODUCT_BRAND := generic
 PRODUCT_DEVICE := generic
 PRODUCT_NAME := generic_no_telephony
diff --git a/target/product/handheld_system.mk b/target/product/handheld_system.mk
new file mode 100644
index 0000000..a961d1e
--- /dev/null
+++ b/target/product/handheld_system.mk
@@ -0,0 +1,108 @@
+#
+# Copyright (C) 2018 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# This makefile contains the system partition contents for
+# a generic phone or tablet device. Only add something here if
+# it definitely doesn't belong on other types of devices (if it
+# does, use base_vendor.mk).
+$(call inherit-product, $(SRC_TARGET_DIR)/product/media_system.mk)
+$(call inherit-product-if-exists, frameworks/base/data/fonts/fonts.mk)
+$(call inherit-product-if-exists, external/google-fonts/dancing-script/fonts.mk)
+$(call inherit-product-if-exists, external/google-fonts/carrois-gothic-sc/fonts.mk)
+$(call inherit-product-if-exists, external/google-fonts/coming-soon/fonts.mk)
+$(call inherit-product-if-exists, external/google-fonts/cutive-mono/fonts.mk)
+$(call inherit-product-if-exists, external/noto-fonts/fonts.mk)
+$(call inherit-product-if-exists, external/roboto-fonts/fonts.mk)
+$(call inherit-product-if-exists, external/hyphenation-patterns/patterns.mk)
+$(call inherit-product-if-exists, frameworks/base/data/keyboards/keyboards.mk)
+$(call inherit-product-if-exists, frameworks/webview/chromium/chromium.mk)
+
+PRODUCT_PACKAGES += \
+    BasicDreams \
+    BlockedNumberProvider \
+    Bluetooth \
+    BluetoothMidiService \
+    BookmarkProvider \
+    Browser2 \
+    BuiltInPrintService \
+    Calendar \
+    CalendarProvider \
+    Camera2 \
+    CaptivePortalLogin \
+    CertInstaller \
+    clatd \
+    clatd.conf \
+    Contacts \
+    DeskClock \
+    DocumentsUI \
+    DownloadProviderUi \
+    EasterEgg \
+    Email \
+    ExactCalculator \
+    ExternalStorageProvider \
+    FusedLocation \
+    Gallery2 \
+    Home \
+    InputDevices \
+    KeyChain \
+    LatinIME \
+    Launcher3QuickStep \
+    librs_jni \
+    ManagedProvisioning \
+    MmsService \
+    MtpDocumentsProvider \
+    Music \
+    MusicFX \
+    NfcNci \
+    OneTimeInitializer \
+    PacProcessor \
+    PrintRecommendationService \
+    PrintSpooler \
+    Provision \
+    ProxyHandler \
+    QuickSearchBox \
+    screenrecord \
+    SecureElement \
+    Settings \
+    SettingsIntelligence \
+    SharedStorageBackup \
+    SimAppDialog \
+    StorageManager \
+    SystemUI \
+    Telecom \
+    TelephonyProvider \
+    TeleService \
+    Traceur \
+    UserDictionaryProvider \
+    VpnDialogs \
+    vr \
+    WallpaperCropper \
+
+
+PRODUCT_SYSTEM_SERVER_APPS += \
+    FusedLocation \
+    InputDevices \
+    KeyChain \
+    Telecom \
+
+PRODUCT_COPY_FILES += \
+    frameworks/av/media/libeffects/data/audio_effects.conf:system/etc/audio_effects.conf
+
+PRODUCT_PROPERTY_OVERRIDES += \
+    ro.carrier=unknown \
+    ro.config.notification_sound=OnTheHunt.ogg \
+    ro.config.alarm_alert=Alarm_Classic.ogg
+
diff --git a/target/product/handheld_vendor.mk b/target/product/handheld_vendor.mk
new file mode 100644
index 0000000..0f73875
--- /dev/null
+++ b/target/product/handheld_vendor.mk
@@ -0,0 +1,30 @@
+#
+# Copyright (C) 2018 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# This makefile contains the non-system partition contents for
+# a generic phone or tablet device. Only add something here if
+# it definitely doesn't belong on other types of devices (if it
+# does, use base_vendor.mk).
+$(call inherit-product, $(SRC_TARGET_DIR)/product/media_vendor.mk)
+PRODUCT_PACKAGES += \
+    audio.primary.default \
+    DisplayCutoutEmulationCornerOverlay \
+    DisplayCutoutEmulationDoubleOverlay \
+    DisplayCutoutEmulationTallOverlay \
+    local_time.default \
+    power.default \
+    SysuiDarkThemeOverlay \
+    vibrator.default \
diff --git a/target/product/mainline_arm64.mk b/target/product/mainline_arm64.mk
new file mode 100644
index 0000000..cc04844
--- /dev/null
+++ b/target/product/mainline_arm64.mk
@@ -0,0 +1,32 @@
+#
+# Copyright (C) 2018 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+$(call inherit-product, $(SRC_TARGET_DIR)/product/core_64_bit.mk)
+$(call inherit-product, $(SRC_TARGET_DIR)/product/mainline_system.mk)
+$(call inherit-product, $(SRC_TARGET_DIR)/product/handheld_vendor.mk)
+$(call inherit-product, $(SRC_TARGET_DIR)/product/telephony_vendor.mk)
+
+PRODUCT_NAME := mainline_arm64
+PRODUCT_DEVICE := generic_arm64
+PRODUCT_BRAND := generic
+PRODUCT_SHIPPING_API_LEVEL := 28
+PRODUCT_RESTRICT_VENDOR_FILES := all
+
+PRODUCT_ENFORCE_ARTIFACT_PATH_REQUIREMENTS := true
+PRODUCT_ARTIFACT_PATH_REQUIREMENT_WHITELIST := \
+  root/init.zygote64_32.rc \
+  system/etc/seccomp_policy/crash_dump.arm.policy \
+  system/etc/seccomp_policy/mediacodec.policy \
diff --git a/target/product/mainline_system.mk b/target/product/mainline_system.mk
new file mode 100644
index 0000000..c41e1d7
--- /dev/null
+++ b/target/product/mainline_system.mk
@@ -0,0 +1,114 @@
+#
+# Copyright (C) 2018 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# This makefile is the basis of a generic system image for a handheld device.
+$(call inherit-product, $(SRC_TARGET_DIR)/product/handheld_system.mk)
+$(call inherit-product, $(SRC_TARGET_DIR)/product/telephony_system.mk)
+
+# Shared java libs
+PRODUCT_PACKAGES += \
+    com.android.nfc_extras \
+
+# Applications
+PRODUCT_PACKAGES += \
+    DMService \
+    LiveWallpapersPicker \
+    PartnerBookmarksProvider \
+    PresencePolling \
+    RcsService \
+    SafetyRegulatoryInfo \
+    Stk \
+    TimeZoneUpdater \
+
+# Binaries
+PRODUCT_PACKAGES += llkd
+
+# OTA support
+PRODUCT_PACKAGES += \
+    update_engine \
+    update_verifier \
+
+# Wrapped net utils for /vendor access.
+PRODUCT_PACKAGES += netutils-wrapper-1.0
+
+# Charger images
+PRODUCT_PACKAGES += charger_res_images
+
+# system_other support
+PRODUCT_PACKAGES += \
+    cppreopts.sh \
+    otapreopt_script \
+
+# Bluetooth libraries
+PRODUCT_PACKAGES += \
+    audio.a2dp.default \
+    audio.hearing_aid.default \
+
+# For ringtones that rely on forward lock encryption
+PRODUCT_PACKAGES += libfwdlockengine
+
+# System libraries commonly depended on by things on the product partition.
+# This list will be pruned periodically.
+PRODUCT_PACKAGES += \
+    android.hardware.biometrics.fingerprint@2.1 \
+    android.hardware.radio@1.0 \
+    android.hardware.radio@1.1 \
+    android.hardware.radio@1.2 \
+    android.hardware.radio.config@1.0 \
+    android.hardware.radio.deprecated@1.0 \
+    android.hardware.secure_element@1.0 \
+    android.hardware.tests.libhwbinder@1.0-impl \
+    android.hidl.base@1.0 \
+    libaudio-resampler \
+    liblogwrap \
+    liblz4 \
+    libminui \
+    libnl \
+    libprotobuf-cpp-full \
+    libprotobuf-cpp-full-rtti \
+
+PRODUCT_PACKAGES_DEBUG += \
+    avbctl \
+    bootctl \
+    tinyplay \
+    tinycap \
+    tinymix \
+    tinypcminfo \
+    update_engine_client \
+
+# Enable stats logging in LMKD
+TARGET_LMKD_STATS_LOG := true
+PRODUCT_SYSTEM_DEFAULT_PROPERTIES += \
+    ro.lmk.log_stats=true
+
+# Enable dynamic partition size
+PRODUCT_USE_DYNAMIC_PARTITION_SIZE := true
+
+PRODUCT_LOCALES := en_US af_ZA am_ET ar_EG as_IN az_AZ be_BY bg_BG bn_BD bs_BA ca_ES cs_CZ da_DK de_DE el_GR en_AU en_CA en_GB en_IN es_ES es_US et_EE eu_ES fa_IR fi_FI fr_CA fr_FR gl_ES gu_IN hi_IN hr_HR hu_HU hy_AM in_ID is_IS it_IT iw_IL ja_JP ka_GE kk_KZ km_KH ko_KR ky_KG lo_LA lt_LT lv_LV km_MH kn_IN mn_MN ml_IN mk_MK mr_IN ms_MY my_MM ne_NP nb_NO nl_NL or_IN pa_IN pl_PL pt_BR pt_PT ro_RO ru_RU si_LK sk_SK sl_SI sq_AL sr_Latn_RS sr_RS sv_SE sw_TZ ta_IN te_IN th_TH tl_PH tr_TR uk_UA ur_PK uz_UZ vi_VN zh_CN zh_HK zh_TW zu_ZA en_XA ar_XB
+
+PRODUCT_NAME := mainline_system
+PRODUCT_BRAND := generic
+
+_base_mk_whitelist :=
+
+_my_whitelist := $(_base_mk_whitelist)
+
+# For mainline, system.img should be mounted at /, so we include ROOT here.
+_my_paths := \
+  $(TARGET_COPY_OUT_ROOT)/ \
+  $(TARGET_COPY_OUT_SYSTEM)/ \
+
+$(call require-artifacts-in-path, $(_my_paths), $(_my_whitelist))
diff --git a/target/product/telephony.mk b/target/product/mainline_system_arm64.mk
similarity index 60%
copy from target/product/telephony.mk
copy to target/product/mainline_system_arm64.mk
index 38a8caa..560dfd3 100644
--- a/target/product/telephony.mk
+++ b/target/product/mainline_system_arm64.mk
@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2007 The Android Open Source Project
+# Copyright (C) 2018 The Android Open Source Project
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
@@ -14,16 +14,11 @@
 # limitations under the License.
 #
 
-# This is the list of product-level settings that are specific
-# to products that have telephony hardware.
+$(call inherit-product, $(SRC_TARGET_DIR)/product/core_64_bit.mk)
+$(call inherit-product, $(SRC_TARGET_DIR)/product/mainline_system.mk)
 
-PRODUCT_PACKAGES := \
-    CarrierConfig \
-    CarrierDefaultApp \
-    Dialer \
-    CallLogBackup \
-    CellBroadcastReceiver \
-    EmergencyInfo \
-    rild
-
-PRODUCT_COPY_FILES := \
+PRODUCT_NAME := mainline_system_arm64
+PRODUCT_DEVICE := mainline_arm64
+PRODUCT_BRAND := generic
+PRODUCT_SHIPPING_API_LEVEL := 28
+PRODUCT_RESTRICT_VENDOR_FILES := all
diff --git a/target/product/media_system.mk b/target/product/media_system.mk
new file mode 100644
index 0000000..992e2ed
--- /dev/null
+++ b/target/product/media_system.mk
@@ -0,0 +1,103 @@
+#
+# Copyright (C) 2018 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# This makefile contains the system partition contents for
+# media-capable devices (non-wearables). Only add something
+# here if it definitely doesn't belong on wearables. Otherwise,
+# choose base_system.mk.
+$(call inherit-product, $(SRC_TARGET_DIR)/product/base_system.mk)
+
+PRODUCT_PACKAGES += \
+    com.android.future.usb.accessory \
+    com.android.mediadrm.signer \
+    com.android.media.remotedisplay \
+    com.android.media.remotedisplay.xml \
+    CompanionDeviceManager \
+    drmserver \
+    ethernet-service \
+    fsck.f2fs \
+    HTMLViewer \
+    libfilterpack_imageproc \
+    libstagefright_soft_aacdec \
+    libstagefright_soft_aacenc \
+    libstagefright_soft_amrdec \
+    libstagefright_soft_amrnbenc \
+    libstagefright_soft_amrwbenc \
+    libstagefright_soft_avcdec \
+    libstagefright_soft_avcenc \
+    libstagefright_soft_flacdec \
+    libstagefright_soft_flacenc \
+    libstagefright_soft_g711dec \
+    libstagefright_soft_gsmdec \
+    libstagefright_soft_hevcdec \
+    libstagefright_soft_mp3dec \
+    libstagefright_soft_mpeg2dec \
+    libstagefright_soft_mpeg4dec \
+    libstagefright_soft_mpeg4enc \
+    libstagefright_soft_opusdec \
+    libstagefright_soft_rawdec \
+    libstagefright_soft_vorbisdec \
+    libstagefright_soft_vpxdec \
+    libstagefright_soft_vpxenc \
+    libwebviewchromium_loader \
+    libwebviewchromium_plat_support \
+    make_f2fs \
+    PackageInstaller \
+    requestsync \
+    StatementService \
+    vndk_snapshot_package \
+    webview \
+
+
+PRODUCT_COPY_FILES += \
+    frameworks/native/data/etc/android.software.webview.xml:system/etc/permissions/android.software.webview.xml
+
+ifneq (REL,$(PLATFORM_VERSION_CODENAME))
+PRODUCT_COPY_FILES += \
+    frameworks/native/data/etc/android.software.preview_sdk.xml:system/etc/permissions/android.software.preview_sdk.xml
+endif
+
+# The order here is the same order they end up on the classpath, so it matters.
+PRODUCT_SYSTEM_SERVER_JARS := \
+    services \
+    ethernet-service \
+    wifi-service \
+    com.android.location.provider.impl \
+
+PRODUCT_COPY_FILES += \
+    system/core/rootdir/etc/public.libraries.android.txt:system/etc/public.libraries.txt
+
+# Enable boot.oat filtering of compiled classes to reduce boot.oat size. b/28026683
+PRODUCT_COPY_FILES += $(call add-to-product-copy-files-if-exists,\
+    frameworks/base/config/compiled-classes-phone:system/etc/compiled-classes)
+
+# Enable dirty image object binning to reduce dirty pages in the image.
+PRODUCT_COPY_FILES += $(call add-to-product-copy-files-if-exists,\
+    frameworks/base/dirty-image-objects-phone:system/etc/dirty-image-objects)
+
+# On userdebug builds, collect more tombstones by default.
+ifneq (,$(filter userdebug eng,$(TARGET_BUILD_VARIANT)))
+PRODUCT_SYSTEM_DEFAULT_PROPERTIES += \
+    tombstoned.max_tombstone_count=50
+endif
+
+PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \
+    ro.logd.size.stats=64K \
+    log.tag.stats_log=I
+
+# Enable CFI for security-sensitive components
+$(call inherit-product, $(SRC_TARGET_DIR)/product/cfi-common.mk)
+$(call inherit-product-if-exists, vendor/google/products/cfi-vendor.mk)
diff --git a/target/product/media_vendor.mk b/target/product/media_vendor.mk
new file mode 100644
index 0000000..1db0b58
--- /dev/null
+++ b/target/product/media_vendor.mk
@@ -0,0 +1,25 @@
+#
+# Copyright (C) 2018 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# This makefile contains the non-system partition contents for
+# media-capable devices (non-wearables). Only add something here
+# if it definitely doesn't belong on wearables. Otherwise, choose
+# base_vendor.mk.
+$(call inherit-product, $(SRC_TARGET_DIR)/product/base_vendor.mk)
+
+PRODUCT_PACKAGES += \
+    libaudiopreprocessing \
+    libwebrtc_audio_preprocessing \
diff --git a/target/product/runtime_libart.mk b/target/product/runtime_libart.mk
index bda4524..6d835fd 100644
--- a/target/product/runtime_libart.mk
+++ b/target/product/runtime_libart.mk
@@ -51,6 +51,10 @@
 PRODUCT_PACKAGES += art-runtime
 # ART/dex helpers.
 PRODUCT_PACKAGES += art-tools
+# Android Runtime APEX module.
+ifneq ($(DONT_INCLUDE_RUNTIME_APEX), true)
+  PRODUCT_PACKAGES += com.android.runtime
+endif
 
 # Certificates.
 PRODUCT_PACKAGES += \
diff --git a/target/product/sdk_base.mk b/target/product/sdk_base.mk
deleted file mode 100644
index 1e5ed19..0000000
--- a/target/product/sdk_base.mk
+++ /dev/null
@@ -1,174 +0,0 @@
-#
-# Copyright (C) 2007 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-PRODUCT_PROPERTY_OVERRIDES :=
-
-PRODUCT_PACKAGES := \
-	CellBroadcastReceiver \
-	CubeLiveWallpapers \
-	CustomLocale \
-	Development \
-	Dialer \
-	Gallery2 \
-	Launcher3QuickStep \
-	Camera2 \
-	librs_jni \
-	LiveWallpapersPicker \
-	Mms \
-	Music \
-	Protips \
-	rild \
-	screenrecord \
-	SdkSetup \
-	SoftKeyboard \
-	sqlite3 \
-	SystemUI \
-	SysuiDarkThemeOverlay \
-	EasterEgg \
-	WallpaperPicker \
-	WidgetPreview \
-
-# Define the host tools and libs that are parts of the SDK.
--include sdk/build/product_sdk.mk
--include development/build/product_sdk.mk
-
-# audio libraries.
-PRODUCT_PACKAGES += \
-	audio.primary.goldfish \
-	audio.r_submix.default \
-	local_time.default
-
-# CDD mandates following codecs
-PRODUCT_PACKAGES += \
-    libstagefright_soft_aacdec \
-    libstagefright_soft_aacenc \
-    libstagefright_soft_amrdec \
-    libstagefright_soft_amrnbenc \
-    libstagefright_soft_amrwbenc \
-    libstagefright_soft_avcdec \
-    libstagefright_soft_avcenc \
-    libstagefright_soft_flacenc \
-    libstagefright_soft_g711dec \
-    libstagefright_soft_gsmdec \
-    libstagefright_soft_hevcdec \
-    libstagefright_soft_mp3dec \
-    libstagefright_soft_mpeg2dec \
-    libstagefright_soft_mpeg4dec \
-    libstagefright_soft_mpeg4enc \
-    libstagefright_soft_opusdec \
-    libstagefright_soft_rawdec \
-    libstagefright_soft_vorbisdec \
-    libstagefright_soft_vpxdec \
-    libstagefright_soft_vpxenc
-
-PRODUCT_PACKAGE_OVERLAYS := development/sdk_overlay
-
-PRODUCT_COPY_FILES := \
-	device/generic/goldfish/data/etc/apns-conf.xml:system/etc/apns-conf.xml \
-	device/sample/etc/old-apns-conf.xml:system/etc/old-apns-conf.xml \
-	frameworks/base/data/sounds/effects/camera_click.ogg:system/media/audio/ui/camera_click.ogg \
-	frameworks/base/data/sounds/effects/VideoRecord.ogg:system/media/audio/ui/VideoRecord.ogg \
-	frameworks/base/data/sounds/effects/VideoStop.ogg:system/media/audio/ui/VideoStop.ogg \
-	device/generic/goldfish/data/etc/handheld_core_hardware.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/handheld_core_hardware.xml \
-	device/generic/goldfish/camera/media_profiles.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_profiles_V1_0.xml \
-	frameworks/av/media/libstagefright/data/media_codecs_google_audio.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_audio.xml \
-	frameworks/av/media/libstagefright/data/media_codecs_google_telephony.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_telephony.xml \
-	device/generic/goldfish/camera/media_codecs_google_video.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_video.xml \
-	device/generic/goldfish/camera/media_codecs.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs.xml \
-	device/generic/goldfish/camera/media_codecs_performance.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_performance.xml \
-	frameworks/native/data/etc/android.hardware.touchscreen.multitouch.jazzhand.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.touchscreen.multitouch.jazzhand.xml \
-	frameworks/native/data/etc/android.hardware.camera.autofocus.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.autofocus.xml \
-	frameworks/native/data/etc/android.hardware.camera.full.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.full.xml \
-	frameworks/native/data/etc/android.hardware.fingerprint.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.fingerprint.xml \
-	frameworks/native/data/etc/android.software.autofill.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.autofill.xml \
-	frameworks/av/media/libeffects/data/audio_effects.conf:$(TARGET_COPY_OUT_VENDOR)/etc/audio_effects.conf \
-	device/generic/goldfish/audio_policy.conf:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy.conf
-
-include $(SRC_TARGET_DIR)/product/emulator.mk
-
-$(call inherit-product-if-exists, frameworks/base/data/sounds/AllAudio.mk)
-$(call inherit-product-if-exists, frameworks/base/data/fonts/fonts.mk)
-$(call inherit-product-if-exists, external/google-fonts/dancing-script/fonts.mk)
-$(call inherit-product-if-exists, external/google-fonts/carrois-gothic-sc/fonts.mk)
-$(call inherit-product-if-exists, external/google-fonts/coming-soon/fonts.mk)
-$(call inherit-product-if-exists, external/google-fonts/cutive-mono/fonts.mk)
-$(call inherit-product-if-exists, external/noto-fonts/fonts.mk)
-$(call inherit-product-if-exists, external/roboto-fonts/fonts.mk)
-$(call inherit-product-if-exists, frameworks/base/data/keyboards/keyboards.mk)
-$(call inherit-product-if-exists, frameworks/webview/chromium/chromium.mk)
-$(call inherit-product, $(SRC_TARGET_DIR)/product/core.mk)
-
-# locale. en_US is both first and in alphabetical order to
-# ensure this is the default locale.
-PRODUCT_LOCALES := \
-	en_US \
-	ar_EG \
-	ar_IL \
-	bg_BG \
-	ca_ES \
-	cs_CZ \
-	da_DK \
-	de_AT \
-	de_CH \
-	de_DE \
-	de_LI \
-	el_GR \
-	en_AU \
-	en_CA \
-	en_GB \
-	en_IE \
-	en_IN \
-	en_NZ \
-	en_SG \
-	en_US \
-	en_ZA \
-	es_ES \
-	es_US \
-	fi_FI \
-	fr_BE \
-	fr_CA \
-	fr_CH \
-	fr_FR \
-	he_IL \
-	hi_IN \
-	hr_HR \
-	hu_HU \
-	id_ID \
-	it_CH \
-	it_IT \
-	ja_JP \
-	ko_KR \
-	lt_LT \
-	lv_LV \
-	nb_NO \
-	nl_BE \
-	nl_NL \
-	pl_PL \
-	pt_BR \
-	pt_PT \
-	ro_RO \
-	ru_RU \
-	sk_SK \
-	sl_SI \
-	sr_RS \
-	sv_SE \
-	th_TH \
-	tl_PH \
-	tr_TR \
-	uk_UA \
-	vi_VN \
-	zh_CN \
-	zh_TW
diff --git a/target/product/sdk_phone_arm64.mk b/target/product/sdk_phone_arm64.mk
index c6b290f..96f0bfd 100644
--- a/target/product/sdk_phone_arm64.mk
+++ b/target/product/sdk_phone_arm64.mk
@@ -20,6 +20,10 @@
 $(call inherit-product, sdk/build/product_sdk.mk)
 $(call inherit-product, development/build/product_sdk.mk)
 
+# keep this apk for sdk targets for now
+PRODUCT_PACKAGES += \
+    EmulatorSmokeTests
+
 # Overrides
 PRODUCT_BRAND := Android
 PRODUCT_NAME := sdk_phone_arm64
diff --git a/target/product/sdk_phone_armv7.mk b/target/product/sdk_phone_armv7.mk
index f2b51cf..04d8d6a 100644
--- a/target/product/sdk_phone_armv7.mk
+++ b/target/product/sdk_phone_armv7.mk
@@ -20,6 +20,10 @@
 $(call inherit-product, sdk/build/product_sdk.mk)
 $(call inherit-product, development/build/product_sdk.mk)
 
+# keep this apk for sdk targets for now
+PRODUCT_PACKAGES += \
+    EmulatorSmokeTests
+
 
 # Overrides
 PRODUCT_BRAND := Android
diff --git a/target/product/sdk_phone_mips.mk b/target/product/sdk_phone_mips.mk
deleted file mode 100644
index 1cc2fe4..0000000
--- a/target/product/sdk_phone_mips.mk
+++ /dev/null
@@ -1,34 +0,0 @@
-#
-# Copyright (C) 2012 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-# This is a build configuration for a full-featured build of the
-# Open-Source part of the tree. It's geared toward a US-centric
-# build quite specifically for the emulator, and might not be
-# entirely appropriate to inherit from for on-device configurations.
-
-$(call inherit-product, $(SRC_TARGET_DIR)/product/sdk_base.mk)
-
-# AOSP emulator images build the AOSP messaging app.
-# Google API images override with the Google API app.
-# See vendor/google/products/sdk_google_phone_*.mk
-PRODUCT_PACKAGES += \
-    messaging
-
-# Overrides
-PRODUCT_BRAND := Android
-PRODUCT_NAME := sdk_phone_mips
-PRODUCT_DEVICE := generic_mips
-PRODUCT_MODEL := Android SDK for Mips
diff --git a/target/product/sdk_phone_mips64.mk b/target/product/sdk_phone_mips64.mk
deleted file mode 100644
index e45d71b..0000000
--- a/target/product/sdk_phone_mips64.mk
+++ /dev/null
@@ -1,35 +0,0 @@
-#
-# Copyright (C) 2009 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-# This is a build configuration for a full-featured build of the
-# Open-Source part of the tree. It's geared toward a US-centric
-# build quite specifically for the emulator, and might not be
-# entirely appropriate to inherit from for on-device configurations.
-
-$(call inherit-product, $(SRC_TARGET_DIR)/product/core_64_bit.mk)
-$(call inherit-product, $(SRC_TARGET_DIR)/product/sdk_base.mk)
-
-# AOSP emulator images build the AOSP messaging app.
-# Google API images override with the Google API app.
-# See vendor/google/products/sdk_google_phone_*.mk
-PRODUCT_PACKAGES += \
-    messaging
-
-# Overrides
-PRODUCT_BRAND := Android
-PRODUCT_NAME := sdk_phone_mips64
-PRODUCT_DEVICE := generic_mips64
-PRODUCT_MODEL := Android SDK built for mips64
diff --git a/target/product/telephony.mk b/target/product/telephony_system.mk
similarity index 78%
rename from target/product/telephony.mk
rename to target/product/telephony_system.mk
index 38a8caa..0b1e8a2 100644
--- a/target/product/telephony.mk
+++ b/target/product/telephony_system.mk
@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2007 The Android Open Source Project
+# Copyright (C) 2018 The Android Open Source Project
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
@@ -14,16 +14,16 @@
 # limitations under the License.
 #
 
-# This is the list of product-level settings that are specific
-# to products that have telephony hardware.
+# This is the list of modules that are specific to products that have telephony
+# hardware, and install on the system partition.
 
 PRODUCT_PACKAGES := \
+    ANS \
     CarrierConfig \
     CarrierDefaultApp \
     Dialer \
     CallLogBackup \
     CellBroadcastReceiver \
     EmergencyInfo \
-    rild
 
 PRODUCT_COPY_FILES := \
diff --git a/target/product/sdk_mips.mk b/target/product/telephony_vendor.mk
similarity index 69%
rename from target/product/sdk_mips.mk
rename to target/product/telephony_vendor.mk
index 366994a..bddd383 100644
--- a/target/product/sdk_mips.mk
+++ b/target/product/telephony_vendor.mk
@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2014 The Android Open Source Project
+# Copyright (C) 2018 The Android Open Source Project
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
@@ -14,8 +14,10 @@
 # limitations under the License.
 #
 
-# Don't modify this file - It's just an alias!
+# This is the list of modules that are specific to products that have telephony
+# hardware, and install outside the system partition.
 
-$(call inherit-product, $(SRC_TARGET_DIR)/product/sdk_phone_mips.mk)
+PRODUCT_PACKAGES := \
+    rild \
 
-PRODUCT_NAME := sdk_mips
+PRODUCT_COPY_FILES := \
diff --git a/target/product/treble_common.mk b/target/product/treble_common.mk
index 6cf66af..bbad484 100644
--- a/target/product/treble_common.mk
+++ b/target/product/treble_common.mk
@@ -21,7 +21,11 @@
 
 # Generic system image inherits from AOSP with telephony
 $(call inherit-product, $(SRC_TARGET_DIR)/product/aosp_base.mk)
-$(call inherit-product, $(SRC_TARGET_DIR)/product/telephony.mk)
+$(call inherit-product, $(SRC_TARGET_DIR)/product/telephony_system.mk)
+$(call inherit-product, $(SRC_TARGET_DIR)/product/telephony_vendor.mk)
+
+# Enable dynamic partition size
+PRODUCT_USE_DYNAMIC_PARTITION_SIZE := true
 
 # Split selinux policy
 PRODUCT_FULL_TREBLE_OVERRIDE := true
@@ -31,15 +35,6 @@
 PRODUCT_PACKAGES += \
     messaging
 
-# The following policy XML files are used as fallback for
-# vendors/devices not using XML to configure audio policy.
-PRODUCT_COPY_FILES += \
-    frameworks/av/services/audiopolicy/config/audio_policy_configuration_generic.xml:system/etc/audio_policy_configuration.xml \
-    frameworks/av/services/audiopolicy/config/primary_audio_policy_configuration.xml:system/etc/primary_audio_policy_configuration.xml \
-    frameworks/av/services/audiopolicy/config/r_submix_audio_policy_configuration.xml:system/etc/r_submix_audio_policy_configuration.xml \
-    frameworks/av/services/audiopolicy/config/audio_policy_volumes.xml:system/etc/audio_policy_volumes.xml \
-    frameworks/av/services/audiopolicy/config/default_volume_tables.xml:system/etc/default_volume_tables.xml \
-
 # Telephony:
 #   Provide a default APN configuration
 PRODUCT_COPY_FILES += \
@@ -51,18 +46,18 @@
 PRODUCT_COPY_FILES += \
     device/generic/common/nfc/libnfc-nci.conf:system/etc/libnfc-nci.conf
 
+# GSI specific tasks on boot
+PRODUCT_COPY_FILES += \
+    build/make/target/product/vndk/init.gsi.rc:system/etc/init/init.gsi.rc
+
 # Support for the O-MR1 devices
 PRODUCT_COPY_FILES += \
-    build/make/target/product/vndk/init.gsi.rc:system/etc/init/init.gsi.rc \
+    build/make/target/product/vndk/init.legacy-gsi.rc:system/etc/init/init.legacy-gsi.rc \
     build/make/target/product/vndk/init.vndk-27.rc:system/etc/init/gsi/init.vndk-27.rc
 
 # Name space configuration file for non-enforcing VNDK
 PRODUCT_PACKAGES += \
     ld.config.vndk_lite.txt
 
-# Support addtional O-MR1 vendor interface
-PRODUCT_EXTRA_VNDK_VERSIONS := 27
-
-# TODO(b/78308559): includes vr_hwc into GSI before vr_hwc move to vendor
-PRODUCT_PACKAGES += \
-    vr_hwc
+# Support addtional O-MR1 and P vendor interface
+PRODUCT_EXTRA_VNDK_VERSIONS := 27 28
diff --git a/target/product/vndk/Android.mk b/target/product/vndk/Android.mk
index 768cb80..7953db0 100644
--- a/target/product/vndk/Android.mk
+++ b/target/product/vndk/Android.mk
@@ -1,4 +1,3 @@
-ifneq ($(BOARD_VNDK_VERSION),)
 LOCAL_PATH:= $(call my-dir)
 
 #####################################################################
@@ -39,7 +38,17 @@
 droidcore: check-vndk-list
 
 check-vndk-list-timestamp := $(call intermediates-dir-for,PACKAGING,vndk)/check-list-timestamp
+
+ifeq ($(TARGET_IS_64_BIT)|$(TARGET_2ND_ARCH),true|)
+# TODO(b/110429754) remove this condition when we support 64-bit-only device
+check-vndk-list: ;
+else ifeq ($(TARGET_BUILD_PDK),true)
+# b/118634643: don't check VNDK lib list when building PDK. Some libs (libandroid_net.so
+# and some render-script related ones) can't be built in PDK due to missing frameworks/base.
+check-vndk-list: ;
+else
 check-vndk-list: $(check-vndk-list-timestamp)
+endif
 
 _vndk_check_failure_message := " error: VNDK library list has been changed.\n"
 ifeq (REL,$(PLATFORM_VERSION_CODENAME))
@@ -86,6 +95,8 @@
 endif
 	@chmod a+x $@
 
+ifneq ($(BOARD_VNDK_VERSION),)
+
 include $(CLEAR_VARS)
 LOCAL_MODULE := vndk_package
 LOCAL_REQUIRED_MODULES := \
@@ -98,8 +109,15 @@
 
 include $(CLEAR_VARS)
 LOCAL_MODULE := vndk_snapshot_package
+_binder32 :=
+ifneq ($(TARGET_USES_64_BIT_BINDER),true)
+ifneq ($(TARGET_IS_64_BIT),true)
+_binder32 := _binder32
+endif
+endif
 LOCAL_REQUIRED_MODULES := \
-    $(foreach vndk_ver,$(PRODUCT_EXTRA_VNDK_VERSIONS),vndk_v$(vndk_ver)_$(TARGET_ARCH))
+    $(foreach vndk_ver,$(PRODUCT_EXTRA_VNDK_VERSIONS),vndk_v$(vndk_ver)_$(TARGET_ARCH)$(_binder32))
+_binder32 :=
 include $(BUILD_PHONY_PACKAGE)
 
 endif # BOARD_VNDK_VERSION is set
diff --git a/target/product/vndk/OWNERS b/target/product/vndk/OWNERS
new file mode 100644
index 0000000..3fdd5af
--- /dev/null
+++ b/target/product/vndk/OWNERS
@@ -0,0 +1,3 @@
+jiyong@google.com
+justinyun@google.com
+smoreland@google.com
diff --git a/target/product/vndk/current.txt b/target/product/vndk/current.txt
index 712e91c..e8f61a4 100644
--- a/target/product/vndk/current.txt
+++ b/target/product/vndk/current.txt
@@ -23,12 +23,14 @@
 VNDK-SP: android.hidl.memory.token@1.0.so
 VNDK-SP: android.hidl.memory@1.0.so
 VNDK-SP: android.hidl.memory@1.0-impl.so
+VNDK-SP: android.hidl.safe_union@1.0.so
 VNDK-SP: libRSCpuRef.so
 VNDK-SP: libRSDriver.so
 VNDK-SP: libRS_internal.so
 VNDK-SP: libbacktrace.so
 VNDK-SP: libbase.so
 VNDK-SP: libbcinfo.so
+VNDK-SP: libbinderthreadstate.so
 VNDK-SP: libblas.so
 VNDK-SP: libc++.so
 VNDK-SP: libcompiler_rt.so
@@ -50,15 +52,19 @@
 VNDK-core: android.frameworks.schedulerservice@1.0.so
 VNDK-core: android.frameworks.sensorservice@1.0.so
 VNDK-core: android.frameworks.vr.composer@1.0.so
+VNDK-core: android.hardware.atrace@1.0.so
 VNDK-core: android.hardware.audio.common-util.so
 VNDK-core: android.hardware.audio.common@2.0.so
 VNDK-core: android.hardware.audio.common@2.0-util.so
 VNDK-core: android.hardware.audio.common@4.0.so
 VNDK-core: android.hardware.audio.common@4.0-util.so
+VNDK-core: android.hardware.audio.common@5.0.so
 VNDK-core: android.hardware.audio.effect@2.0.so
 VNDK-core: android.hardware.audio.effect@4.0.so
+VNDK-core: android.hardware.audio.effect@5.0.so
 VNDK-core: android.hardware.audio@2.0.so
 VNDK-core: android.hardware.audio@4.0.so
+VNDK-core: android.hardware.audio@5.0.so
 VNDK-core: android.hardware.authsecret@1.0.so
 VNDK-core: android.hardware.automotive.audiocontrol@1.0.so
 VNDK-core: android.hardware.automotive.evs@1.0.so
@@ -89,6 +95,7 @@
 VNDK-core: android.hardware.drm@1.0.so
 VNDK-core: android.hardware.drm@1.1.so
 VNDK-core: android.hardware.dumpstate@1.0.so
+VNDK-core: android.hardware.fastboot@1.0.so
 VNDK-core: android.hardware.gatekeeper@1.0.so
 VNDK-core: android.hardware.gnss@1.0.so
 VNDK-core: android.hardware.gnss@1.1.so
@@ -96,6 +103,7 @@
 VNDK-core: android.hardware.graphics.bufferqueue@1.0.so
 VNDK-core: android.hardware.graphics.composer@2.1.so
 VNDK-core: android.hardware.graphics.composer@2.2.so
+VNDK-core: android.hardware.health.storage@1.0.so
 VNDK-core: android.hardware.health@1.0.so
 VNDK-core: android.hardware.health@2.0.so
 VNDK-core: android.hardware.ir@1.0.so
@@ -108,17 +116,23 @@
 VNDK-core: android.hardware.memtrack@1.0.so
 VNDK-core: android.hardware.neuralnetworks@1.0.so
 VNDK-core: android.hardware.neuralnetworks@1.1.so
+VNDK-core: android.hardware.neuralnetworks@1.2.so
 VNDK-core: android.hardware.nfc@1.0.so
 VNDK-core: android.hardware.nfc@1.1.so
 VNDK-core: android.hardware.oemlock@1.0.so
 VNDK-core: android.hardware.power@1.0.so
 VNDK-core: android.hardware.power@1.1.so
 VNDK-core: android.hardware.power@1.2.so
+VNDK-core: android.hardware.power@1.3.so
 VNDK-core: android.hardware.radio.config@1.0.so
+VNDK-core: android.hardware.radio.config@1.1.so
+VNDK-core: android.hardware.radio.config@1.2.so
 VNDK-core: android.hardware.radio.deprecated@1.0.so
 VNDK-core: android.hardware.radio@1.0.so
 VNDK-core: android.hardware.radio@1.1.so
 VNDK-core: android.hardware.radio@1.2.so
+VNDK-core: android.hardware.radio@1.3.so
+VNDK-core: android.hardware.radio@1.4.so
 VNDK-core: android.hardware.secure_element@1.0.so
 VNDK-core: android.hardware.sensors@1.0.so
 VNDK-core: android.hardware.soundtrigger@2.0.so
@@ -151,6 +165,7 @@
 VNDK-core: android.hidl.token@1.0-utils.so
 VNDK-core: android.system.net.netd@1.0.so
 VNDK-core: android.system.net.netd@1.1.so
+VNDK-core: android.system.suspend@1.0.so
 VNDK-core: android.system.wifi.keystore@1.0.so
 VNDK-core: libadf.so
 VNDK-core: libaudioroute.so
@@ -231,20 +246,18 @@
 VNDK-core: libstagefright_soft_vpxdec.so
 VNDK-core: libstagefright_soft_vpxenc.so
 VNDK-core: libstagefright_xmlparser.so
-VNDK-core: libsuspend.so
 VNDK-core: libsysutils.so
 VNDK-core: libtinyalsa.so
 VNDK-core: libtinyxml2.so
 VNDK-core: libui.so
 VNDK-core: libusbhost.so
-VNDK-core: libvixl-arm.so
-VNDK-core: libvixl-arm64.so
 VNDK-core: libvorbisidec.so
 VNDK-core: libwifi-system-iface.so
 VNDK-core: libxml2.so
 VNDK-core: libyuv.so
 VNDK-core: libziparchive.so
 VNDK-private: libbacktrace.so
+VNDK-private: libbinderthreadstate.so
 VNDK-private: libblas.so
 VNDK-private: libcompiler_rt.so
 VNDK-private: libft2.so
diff --git a/target/product/vndk/init.gsi.rc b/target/product/vndk/init.gsi.rc
index 0150b1a..695820e 100644
--- a/target/product/vndk/init.gsi.rc
+++ b/target/product/vndk/init.gsi.rc
@@ -1,2 +1,2 @@
-# If ro.vndk.version is not defined, import init.vndk-27.rc.
-import /system/etc/init/gsi/init.vndk-${ro.vndk.version:-27}.rc
+on early-init
+    umount /product   # TODO(b/119391482): workaround for /system/product
diff --git a/target/product/vndk/init.legacy-gsi.rc b/target/product/vndk/init.legacy-gsi.rc
new file mode 100644
index 0000000..00dd576
--- /dev/null
+++ b/target/product/vndk/init.legacy-gsi.rc
@@ -0,0 +1,3 @@
+# If ro.vndk.version is not defined, import init.vndk-27.rc.
+import /system/etc/init/gsi/init.vndk-${ro.vndk.version:-27}.rc
+
diff --git a/tools/OWNERS b/tools/OWNERS
index 7a23adc..7d666f1 100644
--- a/tools/OWNERS
+++ b/tools/OWNERS
@@ -1,2 +1 @@
-per-file warn.py = chh@google.com
-per-file checkowners.py = chh@google.com
+per-file warn.py,checkowners.py = chh@google.com
diff --git a/tools/apicheck/Android.bp b/tools/apicheck/Android.bp
new file mode 100644
index 0000000..8fe20e9
--- /dev/null
+++ b/tools/apicheck/Android.bp
@@ -0,0 +1,22 @@
+// Copyright (C) 2008 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+java_binary_host {
+    name: "apicheck",
+    wrapper: "etc/apicheck",
+    static_libs: [
+        "doclava",
+        "jsilver",
+    ],
+}
diff --git a/tools/apicheck/Android.mk b/tools/apicheck/Android.mk
deleted file mode 100644
index ab3493d..0000000
--- a/tools/apicheck/Android.mk
+++ /dev/null
@@ -1,27 +0,0 @@
-# Copyright (C) 2007-2008 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-LOCAL_PATH := $(call my-dir)
-
-# the hat script
-# ============================================================
-include $(CLEAR_VARS)
-LOCAL_IS_HOST_MODULE := true
-LOCAL_MODULE_CLASS := EXECUTABLES
-LOCAL_MODULE := apicheck
-LOCAL_SRC_FILES := etc/apicheck
-LOCAL_REQUIRED_MODULES := doclava
-include $(BUILD_PREBUILT)
-
-# Apicheck is now part of Doclava -- See external/doclava.
diff --git a/tools/atree/files.cpp b/tools/atree/files.cpp
index d5c8a97..b90f8b3 100644
--- a/tools/atree/files.cpp
+++ b/tools/atree/files.cpp
@@ -81,7 +81,7 @@
                     state = TEXT;
                     break;
                 }
-                // otherwise fall-through to TEXT case
+                [[fallthrough]];
             case TEXT:
                 if (state != IN_QUOTE && isspace(*p)) {
                     if (q != p) {
diff --git a/tools/buildinfo.sh b/tools/buildinfo.sh
index 5a54462..c2e6f85 100755
--- a/tools/buildinfo.sh
+++ b/tools/buildinfo.sh
@@ -59,6 +59,5 @@
 if [ -n "$BUILD_THUMBPRINT" ] ; then
   echo "ro.build.thumbprint=$BUILD_THUMBPRINT"
 fi
-echo "ro.build.characteristics=$TARGET_AAPT_CHARACTERISTICS"
 
 echo "# end build properties"
diff --git a/tools/buildinfo_common.sh b/tools/buildinfo_common.sh
new file mode 100755
index 0000000..f7f798c
--- /dev/null
+++ b/tools/buildinfo_common.sh
@@ -0,0 +1,29 @@
+#!/bin/bash
+
+partition="$1"
+
+if [ "$#" -ne 1 ]; then
+  echo "Usage: $0 <partition>" 1>&2
+  exit 1
+fi
+
+echo "# begin common build properties"
+echo "# autogenerated by $0"
+
+echo "ro.${partition}.build.date=`$DATE`"
+echo "ro.${partition}.build.date.utc=`$DATE +%s`"
+echo "ro.${partition}.build.fingerprint=$BUILD_FINGERPRINT"
+echo "ro.${partition}.build.id=$BUILD_ID"
+echo "ro.${partition}.build.tags=$BUILD_VERSION_TAGS"
+echo "ro.${partition}.build.type=$TARGET_BUILD_TYPE"
+echo "ro.${partition}.build.version.incremental=$BUILD_NUMBER"
+echo "ro.${partition}.build.version.release=$PLATFORM_VERSION"
+echo "ro.${partition}.build.version.sdk=$PLATFORM_SDK_VERSION"
+
+echo "ro.product.${partition}.brand=$PRODUCT_BRAND"
+echo "ro.product.${partition}.device=$TARGET_DEVICE"
+echo "ro.product.${partition}.manufacturer=$PRODUCT_MANUFACTURER"
+echo "ro.product.${partition}.model=$PRODUCT_MODEL"
+echo "ro.product.${partition}.name=$PRODUCT_NAME"
+
+echo "# end common build properties"
diff --git a/tools/checkowners.py b/tools/checkowners.py
index 1190d30..7f03968 100755
--- a/tools/checkowners.py
+++ b/tools/checkowners.py
@@ -30,28 +30,37 @@
 
 def find_address(address):
   if address not in checked_addresses:
-    request = (gerrit_server + '/accounts/?n=1&o=ALL_EMAILS&q=email:'
+    request = (gerrit_server + '/accounts/?n=1&q=email:'
                + urllib.quote(address))
     echo('Checking email address: ' + address)
     result = urllib2.urlopen(request).read()
-    checked_addresses[address] = (
-        result.find('"email":') >= 0 and result.find('"_account_id":') >= 0)
+    checked_addresses[address] = result.find('"_account_id":') >= 0
+    if checked_addresses[address]:
+      echo('Found email address: ' + address)
   return checked_addresses[address]
 
 
+def check_address(fname, num, address):
+  if find_address(address):
+    return 0
+  print '%s:%d: ERROR: unknown email address: %s' % (fname, num, address)
+  return 1
+
+
 def main():
   # One regular expression to check all valid lines.
   noparent = 'set +noparent'
   email = '([^@ ]+@[^ @]+|\\*)'
-  directive = '(%s|%s)' % (email, noparent)
+  emails = '(%s( *, *%s)*)' % (email, email)
+  directive = '(%s|%s)' % (emails, noparent)
   glob = '[a-zA-Z0-9_\\.\\-\\*\\?]+'
-  perfile = 'per-file +' + glob + ' *= *' + directive
-  pats = '(|%s|%s|%s)$' % (noparent, email, perfile)
+  globs = '(%s( *, *%s)*)' % (glob, glob)
+  perfile = 'per-file +' + globs + ' *= *' + directive
+  include = 'include +([^ :]+ *: *)?[^ ]+'
+  pats = '(|%s|%s|%s|%s)$' % (noparent, email, perfile, include)
   patterns = re.compile(pats)
-
-  # One pattern to capture email address.
-  email_address = '.*(@| |=|^)([^@ =]+@[^ @]+)'
-  address_pattern = re.compile(email_address)
+  address_pattern = re.compile('([^@ ]+@[^ @]+)')
+  perfile_pattern = re.compile('per-file +.*=(.*)')
 
   error = 0
   for fname in args.owners:
@@ -61,17 +70,16 @@
       num += 1
       stripped_line = re.sub('#.*$', '', line).strip()
       if not patterns.match(stripped_line):
-        error = 1
-        print('%s:%d: ERROR: unknown line [%s]'
-              % (fname, num, line.strip()))
-      elif args.check_address and address_pattern.match(stripped_line):
-        address = address_pattern.match(stripped_line).group(2)
-        if find_address(address):
-          echo('Found email address: ' + address)
-        else:
-          error = 1
-          print('%s:%d: ERROR: unknown email address: %s'
-                % (fname, num, address))
+        error += 1
+        print '%s:%d: ERROR: unknown line [%s]' % (fname, num, line.strip())
+      elif args.check_address:
+        if perfile_pattern.match(stripped_line):
+          for addr in perfile_pattern.match(stripped_line).group(1).split(','):
+            a = addr.strip()
+            if a and a != '*':
+              error += check_address(fname, num, addr.strip())
+        elif address_pattern.match(stripped_line):
+          error += check_address(fname, num, stripped_line)
   sys.exit(error)
 
 if __name__ == '__main__':
diff --git a/tools/docker/Dockerfile b/tools/docker/Dockerfile
index ec65aaf..8a4ab94 100644
--- a/tools/docker/Dockerfile
+++ b/tools/docker/Dockerfile
@@ -21,5 +21,6 @@
 COPY gitconfig /home/$username/.gitconfig
 RUN chown $userid:$groupid /home/$username/.gitconfig
 ENV HOME=/home/$username
+ENV USER=$username
 
 ENTRYPOINT chroot --userspec=$(cat /root/username):$(cat /root/username) / /bin/bash -i
diff --git a/tools/droiddoc/test/generics/Android.mk b/tools/droiddoc/test/generics/Android.mk
deleted file mode 100644
index 0c808fd..0000000
--- a/tools/droiddoc/test/generics/Android.mk
+++ /dev/null
@@ -1,28 +0,0 @@
-# Copyright (C) 2008 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-LOCAL_PATH:= $(call my-dir)
-include $(CLEAR_VARS)
-
-LOCAL_SRC_FILES:=$(call all-subdir-java-files)
-
-LOCAL_MODULE:=test_generics
-LOCAL_DROIDDOC_OPTIONS:=\
-        -stubs __test_generics__
-
-LOCAL_DROIDDOC_CUSTOM_TEMPLATE_DIR:=tools/droiddoc/templates-google
-LOCAL_DROIDDOC_CUSTOM_ASSET_DIR:=assets-google
-LOCAL_MODULE_CLASS := JAVA_LIBRARIES
-
-include $(BUILD_DROIDDOC)
diff --git a/tools/droiddoc/test/stubs/Android.mk b/tools/droiddoc/test/stubs/Android.mk
deleted file mode 100644
index fc971e1..0000000
--- a/tools/droiddoc/test/stubs/Android.mk
+++ /dev/null
@@ -1,29 +0,0 @@
-# Copyright (C) 2008 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-LOCAL_PATH:= $(call my-dir)
-include $(CLEAR_VARS)
-
-LOCAL_SRC_FILES:=$(call all-java-files-under,src)
-
-LOCAL_MODULE:=test_stubs
-LOCAL_DROIDDOC_OPTIONS:=\
-        -stubs $(OUT_DIR)/__test_stubs__
-
-LOCAL_DROIDDOC_CUSTOM_TEMPLATE_DIR:=tools/droiddoc/templates-google
-LOCAL_DROIDDOC_CUSTOM_ASSET_DIR:=assets-google
-LOCAL_MODULE_CLASS := JAVA_LIBRARIES
-
-include $(BUILD_DROIDDOC)
-
diff --git a/tools/findleaves.py b/tools/findleaves.py
index f152a87..97302e9 100755
--- a/tools/findleaves.py
+++ b/tools/findleaves.py
@@ -103,7 +103,7 @@
       prune.append(p)
     elif arg.startswith("--dir="):
       d = arg[len("--dir="):]
-      if len(p) == 0:
+      if len(d) == 0:
         usage()
       dirlist.append(d)
     else:
diff --git a/tools/fs_config/Android.mk b/tools/fs_config/Android.mk
index a01e702..5ade258 100644
--- a/tools/fs_config/Android.mk
+++ b/tools/fs_config/Android.mk
@@ -63,6 +63,8 @@
 my_fs_config_h := $(LOCAL_PATH)/default/$(ANDROID_FS_CONFIG_H)
 endif
 
+system_android_filesystem_config := system/core/include/private/android_filesystem_config.h
+
 ##################################
 include $(CLEAR_VARS)
 LOCAL_SRC_FILES := fs_config_generate.c
@@ -72,8 +74,6 @@
 LOCAL_CFLAGS := -Werror -Wno-error=\#warnings
 
 ifneq ($(TARGET_FS_CONFIG_GEN),)
-system_android_filesystem_config := system/core/include/private/android_filesystem_config.h
-
 # Generate the "generated_oem_aid.h" file
 oem := $(local-generated-sources-dir)/generated_oem_aid.h
 $(oem): PRIVATE_LOCAL_PATH := $(LOCAL_PATH)
@@ -104,40 +104,90 @@
 
 include $(BUILD_HOST_EXECUTABLE)
 fs_config_generate_bin := $(LOCAL_INSTALLED_MODULE)
-# List of all supported vendor, oem and odm Partitions
+# List of supported vendor, oem, odm, product and product_services Partitions
 fs_config_generate_extra_partition_list := $(strip \
   $(if $(BOARD_USES_VENDORIMAGE)$(BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE),vendor) \
   $(if $(BOARD_USES_OEMIMAGE)$(BOARD_OEMIMAGE_FILE_SYSTEM_TYPE),oem) \
-  $(if $(BOARD_USES_ODMIMAGE)$(BOARD_ODMIMAGE_FILE_SYSTEM_TYPE),odm))
+  $(if $(BOARD_USES_ODMIMAGE)$(BOARD_ODMIMAGE_FILE_SYSTEM_TYPE),odm) \
+  $(if $(BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE),product) \
+  $(if $(BOARD_PRODUCT_SERVICESIMAGE_FILE_SYSTEM_TYPE),product_services) \
+)
 
 ##################################
-# Generate the system/etc/fs_config_dirs binary file for the target
-# Add fs_config_dirs to PRODUCT_PACKAGES in the device make file to enable
+# Generate the <p>/etc/fs_config_dirs binary files for each partition.
+# Add fs_config_dirs to PRODUCT_PACKAGES in the device make file to enable.
 include $(CLEAR_VARS)
 
 LOCAL_MODULE := fs_config_dirs
+LOCAL_REQUIRED_MODULES := \
+	fs_config_dirs_system \
+	$(foreach t,$(fs_config_generate_extra_partition_list),$(LOCAL_MODULE)_$(t))
+include $(BUILD_PHONY_PACKAGE)
+
+
+##################################
+# Generate the <p>/etc/fs_config_files binary files for each partition.
+# Add fs_config_files to PRODUCT_PACKAGES in the device make file to enable.
+include $(CLEAR_VARS)
+
+LOCAL_MODULE := fs_config_files
+LOCAL_REQUIRED_MODULES := \
+  fs_config_files_system \
+  $(foreach t,$(fs_config_generate_extra_partition_list),$(LOCAL_MODULE)_$(t))
+include $(BUILD_PHONY_PACKAGE)
+
+##################################
+# Generate the <p>/etc/fs_config_dirs binary files for all enabled partitions
+# excluding /system. Add fs_config_dirs_nonsystem to PRODUCT_PACKAGES in the
+# device make file to enable.
+include $(CLEAR_VARS)
+
+LOCAL_MODULE := fs_config_dirs_nonsystem
+LOCAL_REQUIRED_MODULES := $(foreach t,$(fs_config_generate_extra_partition_list),fs_config_dirs_$(t))
+include $(BUILD_PHONY_PACKAGE)
+
+##################################
+# Generate the <p>/etc/fs_config_files binary files for all enabled partitions
+# excluding /system. Add fs_config_files_nonsystem to PRODUCT_PACKAGES in the
+# device make file to enable.
+include $(CLEAR_VARS)
+
+LOCAL_MODULE := fs_config_files_nonsystem
+LOCAL_REQUIRED_MODULES := $(foreach t,$(fs_config_generate_extra_partition_list),fs_config_files_$(t))
+include $(BUILD_PHONY_PACKAGE)
+
+##################################
+# Generate the system/etc/fs_config_dirs binary file for the target
+# Add fs_config_dirs or fs_config_dirs_system to PRODUCT_PACKAGES in
+# the device make file to enable
+include $(CLEAR_VARS)
+
+LOCAL_MODULE := fs_config_dirs_system
 LOCAL_MODULE_CLASS := ETC
-LOCAL_REQUIRED_MODULES := $(foreach t,$(fs_config_generate_extra_partition_list),$(LOCAL_MODULE)_$(t))
+LOCAL_INSTALLED_MODULE_STEM := fs_config_dirs
 include $(BUILD_SYSTEM)/base_rules.mk
+$(LOCAL_BUILT_MODULE): PRIVATE_PARTITION_LIST := $(fs_config_generate_extra_partition_list)
 $(LOCAL_BUILT_MODULE): $(fs_config_generate_bin)
 	@mkdir -p $(dir $@)
-	$< -D $(if $(fs_config_generate_extra_partition_list), \
-	   -P '$(subst $(space),$(comma),$(addprefix -,$(fs_config_generate_extra_partition_list)))') \
+	$< -D $(if $(PRIVATE_PARTITION_LIST), \
+	   -P '$(subst $(space),$(comma),$(addprefix -,$(PRIVATE_PARTITION_LIST)))') \
 	   -o $@
 
 ##################################
 # Generate the system/etc/fs_config_files binary file for the target
-# Add fs_config_files to PRODUCT_PACKAGES in the device make file to enable
+# Add fs_config_files or fs_config_files_system to PRODUCT_PACKAGES in
+# the device make file to enable
 include $(CLEAR_VARS)
 
-LOCAL_MODULE := fs_config_files
+LOCAL_MODULE := fs_config_files_system
 LOCAL_MODULE_CLASS := ETC
-LOCAL_REQUIRED_MODULES := $(foreach t,$(fs_config_generate_extra_partition_list),$(LOCAL_MODULE)_$(t))
+LOCAL_INSTALLED_MODULE_STEM := fs_config_files
 include $(BUILD_SYSTEM)/base_rules.mk
+$(LOCAL_BUILT_MODULE): PRIVATE_PARTITION_LIST := $(fs_config_generate_extra_partition_list)
 $(LOCAL_BUILT_MODULE): $(fs_config_generate_bin)
 	@mkdir -p $(dir $@)
-	$< -F $(if $(fs_config_generate_extra_partition_list), \
-	   -P '$(subst $(space),$(comma),$(addprefix -,$(fs_config_generate_extra_partition_list)))') \
+	$< -F $(if $(PRIVATE_PARTITION_LIST), \
+	   -P '$(subst $(space),$(comma),$(addprefix -,$(PRIVATE_PARTITION_LIST)))') \
 	   -o $@
 
 ifneq ($(filter vendor,$(fs_config_generate_extra_partition_list)),)
@@ -239,19 +289,83 @@
 
 endif
 
-# The newer passwd/group targets are only generated if you
-# use the new TARGET_FS_CONFIG_GEN method.
-ifneq ($(TARGET_FS_CONFIG_GEN),)
+ifneq ($(filter product,$(fs_config_generate_extra_partition_list)),)
+##################################
+# Generate the product/etc/fs_config_dirs binary file for the target
+# Add fs_config_dirs or fs_config_dirs_product to PRODUCT_PACKAGES in
+# the device make file to enable
+include $(CLEAR_VARS)
+
+LOCAL_MODULE := fs_config_dirs_product
+LOCAL_MODULE_CLASS := ETC
+LOCAL_INSTALLED_MODULE_STEM := fs_config_dirs
+LOCAL_MODULE_PATH := $(TARGET_OUT_PRODUCT)/etc
+include $(BUILD_SYSTEM)/base_rules.mk
+$(LOCAL_BUILT_MODULE): $(fs_config_generate_bin)
+	@mkdir -p $(dir $@)
+	$< -D -P product -o $@
+
+##################################
+# Generate the product/etc/fs_config_files binary file for the target
+# Add fs_config_files of fs_config_files_product to PRODUCT_PACKAGES in
+# the device make file to enable
+include $(CLEAR_VARS)
+
+LOCAL_MODULE := fs_config_files_product
+LOCAL_MODULE_CLASS := ETC
+LOCAL_INSTALLED_MODULE_STEM := fs_config_files
+LOCAL_MODULE_PATH := $(TARGET_OUT_PRODUCT)/etc
+include $(BUILD_SYSTEM)/base_rules.mk
+$(LOCAL_BUILT_MODULE): $(fs_config_generate_bin)
+	@mkdir -p $(dir $@)
+	$< -F -P product -o $@
+
+endif
+
+ifneq ($(filter product_services,$(fs_config_generate_extra_partition_list)),)
+##################################
+# Generate the product_services/etc/fs_config_dirs binary file for the target
+# Add fs_config_dirs or fs_config_dirs_product_services to PRODUCT_PACKAGES in
+# the device make file to enable
+include $(CLEAR_VARS)
+
+LOCAL_MODULE := fs_config_dirs_product_services
+LOCAL_MODULE_CLASS := ETC
+LOCAL_INSTALLED_MODULE_STEM := fs_config_dirs
+LOCAL_MODULE_PATH := $(TARGET_OUT_PRODUCT_SERVICES)/etc
+include $(BUILD_SYSTEM)/base_rules.mk
+$(LOCAL_BUILT_MODULE): $(fs_config_generate_bin)
+	@mkdir -p $(dir $@)
+	$< -D -P product_services -o $@
+
+##################################
+# Generate the product_services/etc/fs_config_files binary file for the target
+# Add fs_config_files of fs_config_files_product_services to PRODUCT_PACKAGES in
+# the device make file to enable
+include $(CLEAR_VARS)
+
+LOCAL_MODULE := fs_config_files_product_services
+LOCAL_MODULE_CLASS := ETC
+LOCAL_INSTALLED_MODULE_STEM := fs_config_files
+LOCAL_MODULE_PATH := $(TARGET_OUT_PRODUCT_SERVICES)/etc
+include $(BUILD_SYSTEM)/base_rules.mk
+$(LOCAL_BUILT_MODULE): $(fs_config_generate_bin)
+	@mkdir -p $(dir $@)
+	$< -F -P product_services -o $@
+
+endif
 
 ##################################
 # Build the oemaid header library when fs config files are present.
 # Intentionally break build if you require generated AIDs
 # header file, but are not using any fs config files.
+ifneq ($(TARGET_FS_CONFIG_GEN),)
 include $(CLEAR_VARS)
 LOCAL_MODULE := oemaids_headers
 LOCAL_EXPORT_C_INCLUDE_DIRS := $(dir $(my_gen_oem_aid))
 LOCAL_EXPORT_C_INCLUDE_DEPS := $(my_gen_oem_aid)
 include $(BUILD_HEADER_LIBRARY)
+endif
 
 ##################################
 # Generate the vendor/etc/passwd text file for the target
@@ -265,8 +379,11 @@
 
 include $(BUILD_SYSTEM)/base_rules.mk
 
-$(LOCAL_BUILT_MODULE): PRIVATE_LOCAL_PATH := $(LOCAL_PATH)
+ifneq ($(TARGET_FS_CONFIG_GEN),)
 $(LOCAL_BUILT_MODULE): PRIVATE_TARGET_FS_CONFIG_GEN := $(TARGET_FS_CONFIG_GEN)
+else
+$(LOCAL_BUILT_MODULE): PRIVATE_TARGET_FS_CONFIG_GEN := /dev/null
+endif
 $(LOCAL_BUILT_MODULE): PRIVATE_ANDROID_FS_HDR := $(system_android_filesystem_config)
 $(LOCAL_BUILT_MODULE): $(LOCAL_PATH)/fs_config_generator.py $(TARGET_FS_CONFIG_GEN) $(system_android_filesystem_config)
 	@mkdir -p $(dir $@)
@@ -284,15 +401,17 @@
 
 include $(BUILD_SYSTEM)/base_rules.mk
 
-$(LOCAL_BUILT_MODULE): PRIVATE_LOCAL_PATH := $(LOCAL_PATH)
+ifneq ($(TARGET_FS_CONFIG_GEN),)
 $(LOCAL_BUILT_MODULE): PRIVATE_TARGET_FS_CONFIG_GEN := $(TARGET_FS_CONFIG_GEN)
+else
+$(LOCAL_BUILT_MODULE): PRIVATE_TARGET_FS_CONFIG_GEN := /dev/null
+endif
 $(LOCAL_BUILT_MODULE): PRIVATE_ANDROID_FS_HDR := $(system_android_filesystem_config)
 $(LOCAL_BUILT_MODULE): $(LOCAL_PATH)/fs_config_generator.py $(TARGET_FS_CONFIG_GEN) $(system_android_filesystem_config)
 	@mkdir -p $(dir $@)
 	$(hide) $< group --required-prefix=vendor_ --aid-header=$(PRIVATE_ANDROID_FS_HDR) $(PRIVATE_TARGET_FS_CONFIG_GEN) > $@
 
 system_android_filesystem_config :=
-endif
 
 ANDROID_FS_CONFIG_H :=
 my_fs_config_h :=
diff --git a/tools/fs_config/android_filesystem_config_test_data.h b/tools/fs_config/android_filesystem_config_test_data.h
index 07bc8e5..c65d406 100644
--- a/tools/fs_config/android_filesystem_config_test_data.h
+++ b/tools/fs_config/android_filesystem_config_test_data.h
@@ -26,6 +26,8 @@
     {00555, AID_ROOT, AID_SYSTEM, 0, "vendor/etc"},
     {00555, AID_ROOT, AID_SYSTEM, 0, "oem/etc"},
     {00555, AID_ROOT, AID_SYSTEM, 0, "odm/etc"},
+    {00555, AID_ROOT, AID_SYSTEM, 0, "product/etc"},
+    {00555, AID_ROOT, AID_SYSTEM, 0, "product_services/etc"},
     {00755, AID_SYSTEM, AID_ROOT, 0, "system/oem/etc"},
     {00755, AID_SYSTEM, AID_ROOT, 0, "system/odm/etc"},
     {00755, AID_SYSTEM, AID_ROOT, 0, "system/vendor/etc"},
@@ -41,16 +43,22 @@
     {00444, AID_ROOT, AID_SYSTEM, 0, "vendor/etc/fs_config_dirs"},
     {00444, AID_ROOT, AID_SYSTEM, 0, "oem/etc/fs_config_dirs"},
     {00444, AID_ROOT, AID_SYSTEM, 0, "odm/etc/fs_config_dirs"},
+    {00444, AID_ROOT, AID_SYSTEM, 0, "product/etc/fs_config_dirs"},
+    {00444, AID_ROOT, AID_SYSTEM, 0, "product_services/etc/fs_config_dirs"},
     {00444, AID_ROOT, AID_SYSTEM, 0, "system/etc/fs_config_files"},
     {00444, AID_ROOT, AID_SYSTEM, 0, "vendor/etc/fs_config_files"},
     {00444, AID_ROOT, AID_SYSTEM, 0, "oem/etc/fs_config_files"},
     {00444, AID_ROOT, AID_SYSTEM, 0, "odm/etc/fs_config_files"},
+    {00444, AID_ROOT, AID_SYSTEM, 0, "product/etc/fs_config_files"},
+    {00444, AID_ROOT, AID_SYSTEM, 0, "product_services/etc/fs_config_files"},
     {00644, AID_SYSTEM, AID_ROOT, 0, "system/vendor/etc/fs_config_dirs"},
     {00644, AID_SYSTEM, AID_ROOT, 0, "system/oem/etc/fs_config_dirs"},
     {00644, AID_SYSTEM, AID_ROOT, 0, "system/odm/etc/fs_config_dirs"},
     {00644, AID_SYSTEM, AID_ROOT, 0, "system/vendor/etc/fs_config_files"},
     {00644, AID_SYSTEM, AID_ROOT, 0, "system/oem/etc/fs_config_files"},
     {00644, AID_SYSTEM, AID_ROOT, 0, "system/odm/etc/fs_config_files"},
+    {00644, AID_SYSTEM, AID_ROOT, 0, "system/product/etc/fs_config_files"},
+    {00644, AID_SYSTEM, AID_ROOT, 0, "system/product_services/etc/fs_config_files"},
     {00644, AID_SYSTEM, AID_ROOT, 0, "etc/fs_config_files"},
     {00666, AID_ROOT, AID_SYSTEM, 0, "data/misc/oem"},
 };
diff --git a/tools/fs_config/fs_config_generate.c b/tools/fs_config/fs_config_generate.c
index cb7ff9d..0f0603b 100644
--- a/tools/fs_config/fs_config_generate.c
+++ b/tools/fs_config/fs_config_generate.c
@@ -47,11 +47,15 @@
     {0000, AID_ROOT, AID_ROOT, 0, "vendor/etc/fs_config_dirs"},
     {0000, AID_ROOT, AID_ROOT, 0, "oem/etc/fs_config_dirs"},
     {0000, AID_ROOT, AID_ROOT, 0, "odm/etc/fs_config_dirs"},
+    {0000, AID_ROOT, AID_ROOT, 0, "product/etc/fs_config_dirs"},
+    {0000, AID_ROOT, AID_ROOT, 0, "product_services/etc/fs_config_dirs"},
 #endif
     {0000, AID_ROOT, AID_ROOT, 0, "system/etc/fs_config_files"},
     {0000, AID_ROOT, AID_ROOT, 0, "vendor/etc/fs_config_files"},
     {0000, AID_ROOT, AID_ROOT, 0, "oem/etc/fs_config_files"},
     {0000, AID_ROOT, AID_ROOT, 0, "odm/etc/fs_config_files"},
+    {0000, AID_ROOT, AID_ROOT, 0, "product/etc/fs_config_files"},
+    {0000, AID_ROOT, AID_ROOT, 0, "product_services/etc/fs_config_files"},
 };
 #endif
 
diff --git a/tools/fs_config/fs_config_generator.py b/tools/fs_config/fs_config_generator.py
index 4839578..f7e3eb2 100755
--- a/tools/fs_config/fs_config_generator.py
+++ b/tools/fs_config/fs_config_generator.py
@@ -138,13 +138,13 @@
         'media_codec': 'mediacodec'
     }
 
-    def __init__(self, identifier, value, found):
+    def __init__(self, identifier, value, found, login_shell):
         """
         Args:
             identifier: The identifier name for a #define <identifier>.
             value: The value of the AID, aka the uid.
             found (str): The file found in, not required to be specified.
-
+            login_shell (str): The shell field per man (5) passwd file.
         Raises:
             ValueError: if the friendly name is longer than 31 characters as
                 that is bionic's internal buffer size for name.
@@ -154,6 +154,8 @@
         self.identifier = identifier
         self.value = value
         self.found = found
+        self.login_shell = login_shell
+
         try:
             self.normalized_value = str(int(value, 0))
         except ValueException:
@@ -171,7 +173,8 @@
 
         return self.identifier == other.identifier \
             and self.value == other.value and self.found == other.found \
-            and self.normalized_value == other.normalized_value
+            and self.normalized_value == other.normalized_value \
+            and self.login_shell == other.login_shell
 
     @staticmethod
     def is_friendly(name):
@@ -336,7 +339,7 @@
             ValueError: With message set to indicate the error.
         """
 
-        aid = AID(identifier, value, self._aid_header)
+        aid = AID(identifier, value, self._aid_header, '/system/bin/sh')
 
         # duplicate name
         if aid.friendly in self._aid_name_to_value:
@@ -647,7 +650,7 @@
             sys.exit(error_message('Found specified but unset "value"'))
 
         try:
-            aid = AID(section_name, value, file_name)
+            aid = AID(section_name, value, file_name, '/vendor/bin/sh')
         except ValueError as exception:
             sys.exit(error_message(exception))
 
@@ -1105,9 +1108,14 @@
 
     _INCLUDE = '#include <private/android_filesystem_config.h>'
 
+    # Note that the android_id name field is of type 'const char[]' instead of
+    # 'const char*'.  While this seems less straightforward as we need to
+    # calculate the max length of all names, this allows the entire android_ids
+    # table to be placed in .rodata section instead of .data.rel.ro section,
+    # resulting in less memory pressure.
     _STRUCT_FS_CONFIG = textwrap.dedent("""
                          struct android_id_info {
-                             const char *name;
+                             const char name[%d];
                              unsigned aid;
                          };""")
 
@@ -1129,12 +1137,13 @@
     def __call__(self, args):
 
         hdr = AIDHeaderParser(args['hdrfile'])
+        max_name_length = max(len(aid.friendly) + 1 for aid in hdr.aids)
 
         print AIDArrayGen._GENERATED
         print
         print AIDArrayGen._INCLUDE
         print
-        print AIDArrayGen._STRUCT_FS_CONFIG
+        print AIDArrayGen._STRUCT_FS_CONFIG % max_name_length
         print
         print AIDArrayGen._OPEN_ID_ARRAY
 
@@ -1280,7 +1289,7 @@
         except ValueError as exception:
             sys.exit(exception)
 
-        print "%s::%s:%s::/:/system/bin/sh" % (logon, uid, uid)
+        print "%s::%s:%s::/:%s" % (logon, uid, uid, aid.login_shell)
 
 
 @generator('group')
diff --git a/tools/fs_config/fs_config_test.cpp b/tools/fs_config/fs_config_test.cpp
index f95a4ca..916c615 100644
--- a/tools/fs_config/fs_config_test.cpp
+++ b/tools/fs_config/fs_config_test.cpp
@@ -23,7 +23,6 @@
 #include <android-base/file.h>
 #include <android-base/macros.h>
 #include <android-base/strings.h>
-#include <android-base/stringprintf.h>
 #include <gtest/gtest.h>
 #include <private/android_filesystem_config.h>
 #include <private/fs_config.h>
@@ -31,12 +30,12 @@
 #include "android_filesystem_config_test_data.h"
 
 // must run test in the test directory
-const static char fs_config_generate_command[] = "./fs_config_generate_test";
+static const std::string fs_config_generate_command = "./fs_config_generate_test";
 
-static std::string popenToString(std::string command) {
+static std::string popenToString(const std::string command) {
   std::string ret;
 
-  FILE* fp = popen(command.c_str(), "r");
+  auto fp = popen(command.c_str(), "r");
   if (fp) {
     if (!android::base::ReadFdToString(fileno(fp), &ret)) ret = "";
     pclose(fp);
@@ -46,15 +45,14 @@
 
 static void confirm(std::string&& data, const fs_path_config* config,
                     ssize_t num_config) {
-  const struct fs_path_config_from_file* pc =
-      reinterpret_cast<const fs_path_config_from_file*>(data.c_str());
-  size_t len = data.size();
+  auto pc = reinterpret_cast<const fs_path_config_from_file*>(data.c_str());
+  auto len = data.size();
 
   ASSERT_TRUE(config != NULL);
   ASSERT_LT(0, num_config);
 
   while (len > 0) {
-    uint16_t host_len = pc->len;
+    auto host_len = pc->len;
     if (host_len > len) break;
 
     EXPECT_EQ(config->mode, pc->mode);
@@ -76,148 +74,114 @@
 /* See local android_filesystem_config.h for test data */
 
 TEST(fs_conf_test, dirs) {
-  confirm(popenToString(
-              android::base::StringPrintf("%s -D", fs_config_generate_command)),
+  confirm(popenToString(fs_config_generate_command + " -D"),
           android_device_dirs, arraysize(android_device_dirs));
 }
 
 TEST(fs_conf_test, files) {
-  confirm(popenToString(
-              android::base::StringPrintf("%s -F", fs_config_generate_command)),
+  confirm(popenToString(fs_config_generate_command + " -F"),
           android_device_files, arraysize(android_device_files));
 }
 
-static const char vendor_str[] = "vendor/";
-static const char vendor_alt_str[] = "system/vendor/";
-static const char oem_str[] = "oem/";
-static const char oem_alt_str[] = "system/oem/";
-static const char odm_str[] = "odm/";
-static const char odm_alt_str[] = "system/odm/";
+static bool is_system(const char* prefix) {
+  return !android::base::StartsWith(prefix, "vendor/") &&
+         !android::base::StartsWith(prefix, "system/vendor/") &&
+         !android::base::StartsWith(prefix, "oem/") &&
+         !android::base::StartsWith(prefix, "system/oem/") &&
+         !android::base::StartsWith(prefix, "odm/") &&
+         !android::base::StartsWith(prefix, "system/odm/") &&
+         !android::base::StartsWith(prefix, "product/") &&
+         !android::base::StartsWith(prefix, "system/product/") &&
+         !android::base::StartsWith(prefix, "product_services/") &&
+         !android::base::StartsWith(prefix, "system/product_services/");
+}
 
 TEST(fs_conf_test, system_dirs) {
   std::vector<fs_path_config> dirs;
-  const fs_path_config* config = android_device_dirs;
-  for (size_t num = arraysize(android_device_dirs); num; --num) {
-    if (!android::base::StartsWith(config->prefix, vendor_str) &&
-        !android::base::StartsWith(config->prefix, vendor_alt_str) &&
-        !android::base::StartsWith(config->prefix, oem_str) &&
-        !android::base::StartsWith(config->prefix, oem_alt_str) &&
-        !android::base::StartsWith(config->prefix, odm_str) &&
-        !android::base::StartsWith(config->prefix, odm_alt_str)) {
+  auto config = android_device_dirs;
+  for (auto num = arraysize(android_device_dirs); num; --num) {
+    if (is_system(config->prefix)) {
       dirs.emplace_back(*config);
     }
     ++config;
   }
-  confirm(popenToString(android::base::StringPrintf(
-              "%s -D -P -vendor,-oem,-odm", fs_config_generate_command)),
+  confirm(popenToString(fs_config_generate_command + " -D -P -vendor,-oem,-odm,-product,-product_services"),
+          &dirs[0], dirs.size());
+}
+
+static void fs_conf_test_dirs(const std::string& partition_name) {
+  std::vector<fs_path_config> dirs;
+  auto config = android_device_dirs;
+  const auto str = partition_name + "/";
+  const auto alt_str = "system/" + partition_name + "/";
+  for (auto num = arraysize(android_device_dirs); num; --num) {
+    if (android::base::StartsWith(config->prefix, str) ||
+        android::base::StartsWith(config->prefix, alt_str)) {
+      dirs.emplace_back(*config);
+    }
+    ++config;
+  }
+  confirm(popenToString(fs_config_generate_command + " -D -P " + partition_name),
           &dirs[0], dirs.size());
 }
 
 TEST(fs_conf_test, vendor_dirs) {
-  std::vector<fs_path_config> dirs;
-  const fs_path_config* config = android_device_dirs;
-  for (size_t num = arraysize(android_device_dirs); num; --num) {
-    if (android::base::StartsWith(config->prefix, vendor_str) ||
-        android::base::StartsWith(config->prefix, vendor_alt_str)) {
-      dirs.emplace_back(*config);
-    }
-    ++config;
-  }
-  confirm(popenToString(android::base::StringPrintf(
-              "%s -D -P vendor", fs_config_generate_command)),
-          &dirs[0], dirs.size());
+  fs_conf_test_dirs("vendor");
 }
 
 TEST(fs_conf_test, oem_dirs) {
-  std::vector<fs_path_config> dirs;
-  const fs_path_config* config = android_device_dirs;
-  for (size_t num = arraysize(android_device_dirs); num; --num) {
-    if (android::base::StartsWith(config->prefix, oem_str) ||
-        android::base::StartsWith(config->prefix, oem_alt_str)) {
-      dirs.emplace_back(*config);
-    }
-    ++config;
-  }
-  confirm(popenToString(android::base::StringPrintf(
-              "%s -D -P oem", fs_config_generate_command)),
-          &dirs[0], dirs.size());
+  fs_conf_test_dirs("oem");
 }
 
 TEST(fs_conf_test, odm_dirs) {
-  std::vector<fs_path_config> dirs;
-  const fs_path_config* config = android_device_dirs;
-  for (size_t num = arraysize(android_device_dirs); num; --num) {
-    if (android::base::StartsWith(config->prefix, odm_str) ||
-        android::base::StartsWith(config->prefix, odm_alt_str)) {
-      dirs.emplace_back(*config);
-    }
-    ++config;
-  }
-  confirm(popenToString(android::base::StringPrintf(
-              "%s -D -P odm", fs_config_generate_command)),
-          &dirs[0], dirs.size());
+  fs_conf_test_dirs("odm");
 }
 
 TEST(fs_conf_test, system_files) {
   std::vector<fs_path_config> files;
-  const fs_path_config* config = android_device_files;
-  for (size_t num = arraysize(android_device_files); num; --num) {
-    if (!android::base::StartsWith(config->prefix, vendor_str) &&
-        !android::base::StartsWith(config->prefix, vendor_alt_str) &&
-        !android::base::StartsWith(config->prefix, oem_str) &&
-        !android::base::StartsWith(config->prefix, oem_alt_str) &&
-        !android::base::StartsWith(config->prefix, odm_str) &&
-        !android::base::StartsWith(config->prefix, odm_alt_str)) {
+  auto config = android_device_files;
+  for (auto num = arraysize(android_device_files); num; --num) {
+    if (is_system(config->prefix)) {
       files.emplace_back(*config);
     }
     ++config;
   }
-  confirm(popenToString(android::base::StringPrintf(
-              "%s -F -P -vendor,-oem,-odm", fs_config_generate_command)),
+  confirm(popenToString(fs_config_generate_command + " -F -P -vendor,-oem,-odm,-product,-product_services"),
+          &files[0], files.size());
+}
+
+static void fs_conf_test_files(const std::string& partition_name) {
+  std::vector<fs_path_config> files;
+  auto config = android_device_files;
+  const auto str = partition_name + "/";
+  const auto alt_str = "system/" + partition_name + "/";
+  for (auto num = arraysize(android_device_files); num; --num) {
+    if (android::base::StartsWith(config->prefix, str) ||
+        android::base::StartsWith(config->prefix, alt_str)) {
+      files.emplace_back(*config);
+    }
+    ++config;
+  }
+  confirm(popenToString(fs_config_generate_command + " -F -P " + partition_name),
           &files[0], files.size());
 }
 
 TEST(fs_conf_test, vendor_files) {
-  std::vector<fs_path_config> files;
-  const fs_path_config* config = android_device_files;
-  for (size_t num = arraysize(android_device_files); num; --num) {
-    if (android::base::StartsWith(config->prefix, vendor_str) ||
-        android::base::StartsWith(config->prefix, vendor_alt_str)) {
-      files.emplace_back(*config);
-    }
-    ++config;
-  }
-  confirm(popenToString(android::base::StringPrintf(
-              "%s -F -P vendor", fs_config_generate_command)),
-          &files[0], files.size());
+  fs_conf_test_files("vendor");
 }
 
 TEST(fs_conf_test, oem_files) {
-  std::vector<fs_path_config> files;
-  const fs_path_config* config = android_device_files;
-  for (size_t num = arraysize(android_device_files); num; --num) {
-    if (android::base::StartsWith(config->prefix, oem_str) ||
-        android::base::StartsWith(config->prefix, oem_alt_str)) {
-      files.emplace_back(*config);
-    }
-    ++config;
-  }
-  confirm(popenToString(android::base::StringPrintf(
-              "%s -F -P oem", fs_config_generate_command)),
-          &files[0], files.size());
+  fs_conf_test_files("oem");
 }
 
 TEST(fs_conf_test, odm_files) {
-  std::vector<fs_path_config> files;
-  const fs_path_config* config = android_device_files;
-  for (size_t num = arraysize(android_device_files); num; --num) {
-    if (android::base::StartsWith(config->prefix, odm_str) ||
-        android::base::StartsWith(config->prefix, odm_alt_str)) {
-      files.emplace_back(*config);
-    }
-    ++config;
-  }
-  confirm(popenToString(android::base::StringPrintf(
-              "%s -F -P odm", fs_config_generate_command)),
-          &files[0], files.size());
+  fs_conf_test_files("odm");
+}
+
+TEST(fs_conf_test, product_files) {
+  fs_conf_test_files("product");
+}
+
+TEST(fs_conf_test, product_services_files) {
+  fs_conf_test_files("product_services");
 }
diff --git a/tools/generate-notice-files.py b/tools/generate-notice-files.py
index b754174..49011b2 100755
--- a/tools/generate-notice-files.py
+++ b/tools/generate-notice-files.py
@@ -238,12 +238,14 @@
             if len(included_subdirs) > 0:
                 matched = False
                 for subdir in included_subdirs:
-                    if root.startswith(input_dir + '/' + subdir):
+                    if (root == (input_dir + '/' + subdir) or
+                        root.startswith(input_dir + '/' + subdir + '/')):
                         matched = True
                         break
             elif len(excluded_subdirs) > 0:
                 for subdir in excluded_subdirs:
-                    if root.startswith(input_dir + '/' + subdir):
+                    if (root == (input_dir + '/' + subdir) or
+                        root.startswith(input_dir + '/' + subdir + '/')):
                         matched = False
                         break
             if matched and file.endswith(".txt"):
diff --git a/tools/releasetools/add_img_to_target_files.py b/tools/releasetools/add_img_to_target_files.py
index f68976e..1872a58 100755
--- a/tools/releasetools/add_img_to_target_files.py
+++ b/tools/releasetools/add_img_to_target_files.py
@@ -46,15 +46,16 @@
 from __future__ import print_function
 
 import datetime
+import logging
 import os
 import shlex
 import shutil
-import subprocess
 import sys
 import uuid
 import zipfile
 
 import build_image
+import build_super_image
 import common
 import rangelib
 import sparse_img
@@ -63,8 +64,9 @@
   print("Python 2.7 or newer is required.", file=sys.stderr)
   sys.exit(1)
 
-OPTIONS = common.OPTIONS
+logger = logging.getLogger(__name__)
 
+OPTIONS = common.OPTIONS
 OPTIONS.add_missing = False
 OPTIONS.rebuild_recovery = False
 OPTIONS.replace_updated_files_list = []
@@ -72,9 +74,11 @@
 OPTIONS.replace_verity_private_key = False
 OPTIONS.is_signing = False
 
-
-# Partitions that should have their care_map added to META/care_map.txt.
-PARTITIONS_WITH_CARE_MAP = ('system', 'vendor', 'product')
+# Use a fixed timestamp (01/01/2009 00:00:00 UTC) for files when packaging
+# images. (b/24377993, b/80600931)
+FIXED_FILE_TIMESTAMP = int((
+    datetime.datetime(2009, 1, 1, 0, 0, 0, 0, None) -
+    datetime.datetime.utcfromtimestamp(0)).total_seconds())
 
 
 class OutputFile(object):
@@ -106,16 +110,16 @@
     (which, care_map_ranges): care_map_ranges is the raw string of the care_map
     RangeSet.
   """
-  assert which in PARTITIONS_WITH_CARE_MAP
+  assert which in common.PARTITIONS_WITH_CARE_MAP
 
   simg = sparse_img.SparseImage(imgname)
   care_map_ranges = simg.care_map
-  key = which + "_adjusted_partition_size"
-  adjusted_blocks = OPTIONS.info_dict.get(key)
-  if adjusted_blocks:
-    assert adjusted_blocks > 0, "blocks should be positive for " + which
-    care_map_ranges = care_map_ranges.intersect(rangelib.RangeSet(
-        "0-%d" % (adjusted_blocks,)))
+  key = which + "_image_blocks"
+  image_blocks = OPTIONS.info_dict.get(key)
+  if image_blocks:
+    assert image_blocks > 0, "blocks for {} must be positive".format(which)
+    care_map_ranges = care_map_ranges.intersect(
+        rangelib.RangeSet("0-{}".format(image_blocks)))
 
   return [which, care_map_ranges.to_string_raw()]
 
@@ -126,7 +130,7 @@
 
   img = OutputFile(output_zip, OPTIONS.input_tmp, "IMAGES", "system.img")
   if os.path.exists(img.input_name):
-    print("system.img already exists; no need to rebuild...")
+    logger.info("system.img already exists; no need to rebuild...")
     return img.input_name
 
   def output_sink(fn, data):
@@ -141,7 +145,7 @@
       common.ZipWrite(output_zip, ofile.name, arc_name)
 
   if OPTIONS.rebuild_recovery:
-    print("Building new recovery patch")
+    logger.info("Building new recovery patch")
     common.MakeRecoveryPatch(OPTIONS.input_tmp, output_sink, recovery_img,
                              boot_img, info_dict=OPTIONS.info_dict)
 
@@ -158,7 +162,7 @@
 
   img = OutputFile(output_zip, OPTIONS.input_tmp, "IMAGES", "system_other.img")
   if os.path.exists(img.input_name):
-    print("system_other.img already exists; no need to rebuild...")
+    logger.info("system_other.img already exists; no need to rebuild...")
     return
 
   CreateImage(OPTIONS.input_tmp, OPTIONS.info_dict, "system_other", img)
@@ -170,7 +174,7 @@
 
   img = OutputFile(output_zip, OPTIONS.input_tmp, "IMAGES", "vendor.img")
   if os.path.exists(img.input_name):
-    print("vendor.img already exists; no need to rebuild...")
+    logger.info("vendor.img already exists; no need to rebuild...")
     return img.input_name
 
   block_list = OutputFile(output_zip, OPTIONS.input_tmp, "IMAGES", "vendor.map")
@@ -185,7 +189,7 @@
 
   img = OutputFile(output_zip, OPTIONS.input_tmp, "IMAGES", "product.img")
   if os.path.exists(img.input_name):
-    print("product.img already exists; no need to rebuild...")
+    logger.info("product.img already exists; no need to rebuild...")
     return img.input_name
 
   block_list = OutputFile(
@@ -196,6 +200,40 @@
   return img.name
 
 
+def AddProductServices(output_zip):
+  """Turn the contents of PRODUCT_SERVICES into a product_services image and
+  store it in output_zip."""
+
+  img = OutputFile(output_zip, OPTIONS.input_tmp, "IMAGES",
+                   "product_services.img")
+  if os.path.exists(img.input_name):
+    logger.info("product_services.img already exists; no need to rebuild...")
+    return img.input_name
+
+  block_list = OutputFile(
+      output_zip, OPTIONS.input_tmp, "IMAGES", "product_services.map")
+  CreateImage(
+      OPTIONS.input_tmp, OPTIONS.info_dict, "product_services", img,
+      block_list=block_list)
+  return img.name
+
+
+def AddOdm(output_zip):
+  """Turn the contents of ODM into an odm image and store it in output_zip."""
+
+  img = OutputFile(output_zip, OPTIONS.input_tmp, "IMAGES", "odm.img")
+  if os.path.exists(img.input_name):
+    logger.info("odm.img already exists; no need to rebuild...")
+    return img.input_name
+
+  block_list = OutputFile(
+      output_zip, OPTIONS.input_tmp, "IMAGES", "odm.map")
+  CreateImage(
+      OPTIONS.input_tmp, OPTIONS.info_dict, "odm", img,
+      block_list=block_list)
+  return img.name
+
+
 def AddDtbo(output_zip):
   """Adds the DTBO image.
 
@@ -204,7 +242,7 @@
   """
   img = OutputFile(output_zip, OPTIONS.input_tmp, "IMAGES", "dtbo.img")
   if os.path.exists(img.input_name):
-    print("dtbo.img already exists; no need to rebuild...")
+    logger.info("dtbo.img already exists; no need to rebuild...")
     return img.input_name
 
   dtbo_prebuilt_path = os.path.join(
@@ -223,17 +261,14 @@
     args = OPTIONS.info_dict.get("avb_dtbo_add_hash_footer_args")
     if args and args.strip():
       cmd.extend(shlex.split(args))
-    p = common.Run(cmd, stdout=subprocess.PIPE)
-    p.communicate()
-    assert p.returncode == 0, \
-        "avbtool add_hash_footer of %s failed" % (img.name,)
+    common.RunAndCheckOutput(cmd)
 
   img.Write()
   return img.name
 
 
 def CreateImage(input_dir, info_dict, what, output_file, block_list=None):
-  print("creating " + what + ".img...")
+  logger.info("creating " + what + ".img...")
 
   image_props = build_image.ImagePropFromGlobalDict(info_dict, what)
   fstab = info_dict["fstab"]
@@ -241,11 +276,7 @@
   if fstab and mount_point in fstab:
     image_props["fs_type"] = fstab[mount_point].fs_type
 
-  # Use a fixed timestamp (01/01/2009) when packaging the image.
-  # Bug: 24377993
-  epoch = datetime.datetime.fromtimestamp(0)
-  timestamp = (datetime.datetime(2009, 1, 1) - epoch).total_seconds()
-  image_props["timestamp"] = int(timestamp)
+  image_props["timestamp"] = FIXED_FILE_TIMESTAMP
 
   if what == "system":
     fs_config_prefix = ""
@@ -276,26 +307,31 @@
   hash_seed = "hash_seed-" + uuid_seed
   image_props["hash_seed"] = str(uuid.uuid5(uuid.NAMESPACE_URL, hash_seed))
 
-  succ = build_image.BuildImage(os.path.join(input_dir, what.upper()),
-                                image_props, output_file.name)
-  assert succ, "build " + what + ".img image failed"
+  build_image.BuildImage(
+      os.path.join(input_dir, what.upper()), image_props, output_file.name)
 
   output_file.Write()
   if block_list:
     block_list.Write()
 
-  # Set the 'adjusted_partition_size' that excludes the verity blocks of the
-  # given image. When avb is enabled, this size is the max image size returned
-  # by the avb tool.
+  # Set the '_image_blocks' that excludes the verity metadata blocks of the
+  # given image. When AVB is enabled, this size is the max image size returned
+  # by the AVB tool.
   is_verity_partition = "verity_block_device" in image_props
   verity_supported = (image_props.get("verity") == "true" or
                       image_props.get("avb_enable") == "true")
   is_avb_enable = image_props.get("avb_hashtree_enable") == "true"
   if verity_supported and (is_verity_partition or is_avb_enable):
-    adjusted_blocks_value = image_props.get("partition_size")
-    if adjusted_blocks_value:
-      adjusted_blocks_key = what + "_adjusted_partition_size"
-      info_dict[adjusted_blocks_key] = int(adjusted_blocks_value)/4096 - 1
+    image_size = image_props.get("image_size")
+    if image_size:
+      image_blocks_key = what + "_image_blocks"
+      info_dict[image_blocks_key] = int(image_size) / 4096 - 1
+
+  use_dynamic_size = (
+      info_dict.get("use_dynamic_partition_size") == "true" and
+      what in shlex.split(info_dict.get("dynamic_partition_list", "").strip()))
+  if use_dynamic_size:
+    info_dict.update(build_image.GlobalDictFromImageProp(image_props, what))
 
 
 def AddUserdata(output_zip):
@@ -309,7 +345,7 @@
 
   img = OutputFile(output_zip, OPTIONS.input_tmp, "IMAGES", "userdata.img")
   if os.path.exists(img.input_name):
-    print("userdata.img already exists; no need to rebuild...")
+    logger.info("userdata.img already exists; no need to rebuild...")
     return
 
   # Skip userdata.img if no size.
@@ -317,13 +353,9 @@
   if not image_props.get("partition_size"):
     return
 
-  print("creating userdata.img...")
+  logger.info("creating userdata.img...")
 
-  # Use a fixed timestamp (01/01/2009) when packaging the image.
-  # Bug: 24377993
-  epoch = datetime.datetime.fromtimestamp(0)
-  timestamp = (datetime.datetime(2009, 1, 1) - epoch).total_seconds()
-  image_props["timestamp"] = int(timestamp)
+  image_props["timestamp"] = FIXED_FILE_TIMESTAMP
 
   if OPTIONS.info_dict.get("userdata_img_with_data") == "true":
     user_dir = os.path.join(OPTIONS.input_tmp, "DATA")
@@ -333,65 +365,78 @@
   fstab = OPTIONS.info_dict["fstab"]
   if fstab:
     image_props["fs_type"] = fstab["/data"].fs_type
-  succ = build_image.BuildImage(user_dir, image_props, img.name)
-  assert succ, "build userdata.img image failed"
+  build_image.BuildImage(user_dir, image_props, img.name)
 
   common.CheckSize(img.name, "userdata.img", OPTIONS.info_dict)
   img.Write()
 
 
-def AppendVBMetaArgsForPartition(cmd, partition, img_path, public_key_dir):
-  if not img_path:
-    return
+def AppendVBMetaArgsForPartition(cmd, partition, image):
+  """Appends the VBMeta arguments for partition.
 
+  It sets up the VBMeta argument by including the partition descriptor from the
+  given 'image', or by configuring the partition as a chained partition.
+
+  Args:
+    cmd: A list of command args that will be used to generate the vbmeta image.
+        The argument for the partition will be appended to the list.
+    partition: The name of the partition (e.g. "system").
+    image: The path to the partition image.
+  """
   # Check if chain partition is used.
   key_path = OPTIONS.info_dict.get("avb_" + partition + "_key_path")
   if key_path:
-    # extract public key in AVB format to be included in vbmeta.img
-    avbtool = os.getenv('AVBTOOL') or OPTIONS.info_dict["avb_avbtool"]
-    public_key_path = os.path.join(public_key_dir, "%s.avbpubkey" % partition)
-    p = common.Run([avbtool, "extract_public_key", "--key", key_path,
-                    "--output", public_key_path],
-                   stdout=subprocess.PIPE, stderr=subprocess.PIPE)
-    p.communicate()
-    assert p.returncode == 0, \
-        "avbtool extract_public_key fail for partition: %r" % partition
-
-    rollback_index_location = OPTIONS.info_dict[
-        "avb_" + partition + "_rollback_index_location"]
-    cmd.extend(["--chain_partition", "%s:%s:%s" % (
-        partition, rollback_index_location, public_key_path)])
+    chained_partition_arg = common.GetAvbChainedPartitionArg(
+        partition, OPTIONS.info_dict)
+    cmd.extend(["--chain_partition", chained_partition_arg])
   else:
-    cmd.extend(["--include_descriptors_from_image", img_path])
+    cmd.extend(["--include_descriptors_from_image", image])
 
 
-def AddVBMeta(output_zip, partitions):
-  """Creates a VBMeta image and store it in output_zip.
+def AddVBMeta(output_zip, partitions, name, needed_partitions):
+  """Creates a VBMeta image and stores it in output_zip.
+
+  It generates the requested VBMeta image. The requested image could be for
+  top-level or chained VBMeta image, which is determined based on the name.
 
   Args:
     output_zip: The output zip file, which needs to be already open.
     partitions: A dict that's keyed by partition names with image paths as
-        values. Only valid partition names are accepted, which include 'boot',
-        'recovery', 'system', 'vendor', 'dtbo'.
+        values. Only valid partition names are accepted, as listed in
+        common.AVB_PARTITIONS.
+    name: Name of the VBMeta partition, e.g. 'vbmeta', 'vbmeta_system'.
+    needed_partitions: Partitions whose descriptors should be included into the
+        generated VBMeta image.
+
+  Returns:
+    Path to the created image.
+
+  Raises:
+    AssertionError: On invalid input args.
   """
-  img = OutputFile(output_zip, OPTIONS.input_tmp, "IMAGES", "vbmeta.img")
+  assert needed_partitions, "Needed partitions must be specified"
+
+  img = OutputFile(
+      output_zip, OPTIONS.input_tmp, "IMAGES", "{}.img".format(name))
   if os.path.exists(img.input_name):
-    print("vbmeta.img already exists; not rebuilding...")
+    logger.info("%s.img already exists; not rebuilding...", name)
     return img.input_name
 
   avbtool = os.getenv('AVBTOOL') or OPTIONS.info_dict["avb_avbtool"]
   cmd = [avbtool, "make_vbmeta_image", "--output", img.name]
-  common.AppendAVBSigningArgs(cmd, "vbmeta")
+  common.AppendAVBSigningArgs(cmd, name)
 
-  public_key_dir = common.MakeTempDir(prefix="avbpubkey-")
   for partition, path in partitions.items():
-    assert partition in common.AVB_PARTITIONS, 'Unknown partition: %s' % (
-        partition,)
-    assert os.path.exists(path), 'Failed to find %s for partition %s' % (
-        path, partition)
-    AppendVBMetaArgsForPartition(cmd, partition, path, public_key_dir)
+    if partition not in needed_partitions:
+      continue
+    assert (partition in common.AVB_PARTITIONS or
+            partition.startswith('vbmeta_')), \
+        'Unknown partition: {}'.format(partition)
+    assert os.path.exists(path), \
+        'Failed to find {} for {}'.format(path, partition)
+    AppendVBMetaArgsForPartition(cmd, partition, path)
 
-  args = OPTIONS.info_dict.get("avb_vbmeta_args")
+  args = OPTIONS.info_dict.get("avb_{}_args".format(name))
   if args and args.strip():
     split_args = shlex.split(args)
     for index, arg in enumerate(split_args[:-1]):
@@ -405,20 +450,19 @@
         if os.path.exists(image_path):
           continue
         found = False
-        for dir_name in ['IMAGES', 'RADIO', 'VENDOR_IMAGES', 'PREBUILT_IMAGES']:
+        for dir_name in ['IMAGES', 'RADIO', 'PREBUILT_IMAGES']:
           alt_path = os.path.join(
               OPTIONS.input_tmp, dir_name, os.path.basename(image_path))
           if os.path.exists(alt_path):
             split_args[index + 1] = alt_path
             found = True
             break
-        assert found, 'failed to find %s' % (image_path,)
+        assert found, 'Failed to find {}'.format(image_path)
     cmd.extend(split_args)
 
-  p = common.Run(cmd, stdout=subprocess.PIPE, stderr=subprocess.PIPE)
-  p.communicate()
-  assert p.returncode == 0, "avbtool make_vbmeta_image failed"
+  common.RunAndCheckOutput(cmd)
   img.Write()
+  return img.name
 
 
 def AddPartitionTable(output_zip):
@@ -427,7 +471,7 @@
   img = OutputFile(
       output_zip, OPTIONS.input_tmp, "IMAGES", "partition-table.img")
   bpt = OutputFile(
-      output_zip, OPTIONS.input_tmp, "IMAGES", "partition-table.bpt")
+      output_zip, OPTIONS.input_tmp, "META", "partition-table.bpt")
 
   # use BPTTOOL from environ, or "bpttool" if empty or not set.
   bpttool = os.getenv("BPTTOOL") or "bpttool"
@@ -443,10 +487,7 @@
   args = OPTIONS.info_dict.get("board_bpt_make_table_args")
   if args:
     cmd.extend(shlex.split(args))
-
-  p = common.Run(cmd, stdout=subprocess.PIPE)
-  p.communicate()
-  assert p.returncode == 0, "bpttool make_table failed"
+  common.RunAndCheckOutput(cmd)
 
   img.Write()
   bpt.Write()
@@ -457,7 +498,7 @@
 
   img = OutputFile(output_zip, OPTIONS.input_tmp, "IMAGES", "cache.img")
   if os.path.exists(img.input_name):
-    print("cache.img already exists; no need to rebuild...")
+    logger.info("cache.img already exists; no need to rebuild...")
     return
 
   image_props = build_image.ImagePropFromGlobalDict(OPTIONS.info_dict, "cache")
@@ -465,39 +506,30 @@
   if "fs_type" not in image_props:
     return
 
-  print("creating cache.img...")
+  logger.info("creating cache.img...")
 
-  # Use a fixed timestamp (01/01/2009) when packaging the image.
-  # Bug: 24377993
-  epoch = datetime.datetime.fromtimestamp(0)
-  timestamp = (datetime.datetime(2009, 1, 1) - epoch).total_seconds()
-  image_props["timestamp"] = int(timestamp)
+  image_props["timestamp"] = FIXED_FILE_TIMESTAMP
 
   user_dir = common.MakeTempDir()
 
   fstab = OPTIONS.info_dict["fstab"]
   if fstab:
     image_props["fs_type"] = fstab["/cache"].fs_type
-  succ = build_image.BuildImage(user_dir, image_props, img.name)
-  assert succ, "build cache.img image failed"
+  build_image.BuildImage(user_dir, image_props, img.name)
 
   common.CheckSize(img.name, "cache.img", OPTIONS.info_dict)
   img.Write()
 
 
-def AddRadioImagesForAbOta(output_zip, ab_partitions):
-  """Adds the radio images needed for A/B OTA to the output file.
+def CheckAbOtaImages(output_zip, ab_partitions):
+  """Checks that all the listed A/B partitions have their images available.
 
-  It parses the list of A/B partitions, looks for the missing ones from RADIO/
-  or VENDOR_IMAGES/ dirs, and copies them to IMAGES/ of the output file (or
-  dir).
-
-  It also ensures that on returning from the function all the listed A/B
-  partitions must have their images available under IMAGES/.
+  The images need to be available under IMAGES/ or RADIO/, with the former takes
+  a priority.
 
   Args:
     output_zip: The output zip file (needs to be already open), or None to
-        write images to OPTIONS.input_tmp/.
+        find images in OPTIONS.input_tmp/.
     ab_partitions: The list of A/B partitions.
 
   Raises:
@@ -505,53 +537,35 @@
   """
   for partition in ab_partitions:
     img_name = partition.strip() + ".img"
-    prebuilt_path = os.path.join(OPTIONS.input_tmp, "IMAGES", img_name)
-    if os.path.exists(prebuilt_path):
-      print("%s already exists, no need to overwrite..." % (img_name,))
-      continue
-
-    img_radio_path = os.path.join(OPTIONS.input_tmp, "RADIO", img_name)
-    if os.path.exists(img_radio_path):
-      if output_zip:
-        common.ZipWrite(output_zip, img_radio_path, "IMAGES/" + img_name)
-      else:
-        shutil.copy(img_radio_path, prebuilt_path)
-      continue
-
-    # Walk through VENDOR_IMAGES/ since files could be under subdirs.
-    img_vendor_dir = os.path.join(OPTIONS.input_tmp, "VENDOR_IMAGES")
-    for root, _, files in os.walk(img_vendor_dir):
-      if img_name in files:
-        if output_zip:
-          common.ZipWrite(output_zip, os.path.join(root, img_name),
-                          "IMAGES/" + img_name)
-        else:
-          shutil.copy(os.path.join(root, img_name), prebuilt_path)
-        break
 
     # Assert that the image is present under IMAGES/ now.
     if output_zip:
       # Zip spec says: All slashes MUST be forward slashes.
-      img_path = 'IMAGES/' + img_name
-      assert img_path in output_zip.namelist(), "cannot find " + img_name
+      images_path = "IMAGES/" + img_name
+      radio_path = "RADIO/" + img_name
+      available = (images_path in output_zip.namelist() or
+                   radio_path in output_zip.namelist())
     else:
-      img_path = os.path.join(OPTIONS.input_tmp, "IMAGES", img_name)
-      assert os.path.exists(img_path), "cannot find " + img_name
+      images_path = os.path.join(OPTIONS.input_tmp, "IMAGES", img_name)
+      radio_path = os.path.join(OPTIONS.input_tmp, "RADIO", img_name)
+      available = os.path.exists(images_path) or os.path.exists(radio_path)
+
+    assert available, "Failed to find " + img_name
 
 
-def AddCareMapTxtForAbOta(output_zip, ab_partitions, image_paths):
-  """Generates and adds care_map.txt for system and vendor partitions.
+def AddCareMapForAbOta(output_zip, ab_partitions, image_paths):
+  """Generates and adds care_map.pb for a/b partition that has care_map.
 
   Args:
     output_zip: The output zip file (needs to be already open), or None to
-        write images to OPTIONS.input_tmp/.
+        write care_map.pb to OPTIONS.input_tmp/.
     ab_partitions: The list of A/B partitions.
     image_paths: A map from the partition name to the image path.
   """
   care_map_list = []
   for partition in ab_partitions:
     partition = partition.strip()
-    if partition not in PARTITIONS_WITH_CARE_MAP:
+    if partition not in common.PARTITIONS_WITH_CARE_MAP:
       continue
 
     verity_block_device = "{}_verity_block_device".format(partition)
@@ -562,15 +576,41 @@
       assert os.path.exists(image_path)
       care_map_list += GetCareMap(partition, image_path)
 
-  if care_map_list:
-    care_map_path = "META/care_map.txt"
-    if output_zip and care_map_path not in output_zip.namelist():
-      common.ZipWriteStr(output_zip, care_map_path, '\n'.join(care_map_list))
-    else:
-      with open(os.path.join(OPTIONS.input_tmp, care_map_path), 'w') as fp:
-        fp.write('\n'.join(care_map_list))
-      if output_zip:
-        OPTIONS.replace_updated_files_list.append(care_map_path)
+      # adds fingerprint field to the care_map
+      build_props = OPTIONS.info_dict.get(partition + ".build.prop", {})
+      prop_name_list = ["ro.{}.build.fingerprint".format(partition),
+                        "ro.{}.build.thumbprint".format(partition)]
+
+      present_props = [x for x in prop_name_list if x in build_props]
+      if not present_props:
+        logger.warning("fingerprint is not present for partition %s", partition)
+        property_id, fingerprint = "unknown", "unknown"
+      else:
+        property_id = present_props[0]
+        fingerprint = build_props[property_id]
+      care_map_list += [property_id, fingerprint]
+
+  if not care_map_list:
+    return
+
+  # Converts the list into proto buf message by calling care_map_generator; and
+  # writes the result to a temp file.
+  temp_care_map_text = common.MakeTempFile(prefix="caremap_text-",
+                                           suffix=".txt")
+  with open(temp_care_map_text, 'w') as text_file:
+    text_file.write('\n'.join(care_map_list))
+
+  temp_care_map = common.MakeTempFile(prefix="caremap-", suffix=".pb")
+  care_map_gen_cmd = ["care_map_generator", temp_care_map_text, temp_care_map]
+  common.RunAndCheckOutput(care_map_gen_cmd)
+
+  care_map_path = "META/care_map.pb"
+  if output_zip and care_map_path not in output_zip.namelist():
+    common.ZipWrite(output_zip, temp_care_map, arcname=care_map_path)
+  else:
+    shutil.copy(temp_care_map, os.path.join(OPTIONS.input_tmp, care_map_path))
+    if output_zip:
+      OPTIONS.replace_updated_files_list.append(care_map_path)
 
 
 def AddPackRadioImages(output_zip, images):
@@ -592,7 +632,7 @@
 
     prebuilt_path = os.path.join(OPTIONS.input_tmp, "IMAGES", img_name)
     if os.path.exists(prebuilt_path):
-      print("%s already exists, no need to overwrite..." % (img_name,))
+      logger.info("%s already exists, no need to overwrite...", img_name)
       continue
 
     img_radio_path = os.path.join(OPTIONS.input_tmp, "RADIO", img_name)
@@ -605,10 +645,31 @@
       shutil.copy(img_radio_path, prebuilt_path)
 
 
+def AddSuperEmpty(output_zip):
+  """Create a super_empty.img and store it in output_zip."""
+
+  img = OutputFile(output_zip, OPTIONS.input_tmp, "IMAGES", "super_empty.img")
+  build_super_image.BuildSuperImage(OPTIONS.info_dict, img.name)
+  img.Write()
+
+
+def AddSuperSplit(output_zip):
+  """Create split super_*.img and store it in output_zip."""
+
+  outdir = os.path.join(OPTIONS.input_tmp, "OTA")
+  built = build_super_image.BuildSuperImage(OPTIONS.input_tmp, outdir)
+
+  if built:
+    for dev in OPTIONS.info_dict['super_block_devices'].strip().split():
+      img = OutputFile(output_zip, OPTIONS.input_tmp, "OTA",
+                       "super_" + dev + ".img")
+      img.Write()
+
+
 def ReplaceUpdatedFiles(zip_filename, files_list):
   """Updates all the ZIP entries listed in files_list.
 
-  For now the list includes META/care_map.txt, and the related files under
+  For now the list includes META/care_map.pb, and the related files under
   SYSTEM/ after rebuilding recovery.
   """
   common.ZipDelete(zip_filename, files_list)
@@ -641,23 +702,32 @@
 
   if not OPTIONS.add_missing:
     if os.path.isdir(os.path.join(OPTIONS.input_tmp, "IMAGES")):
-      print("target_files appears to already contain images.")
+      logger.warning("target_files appears to already contain images.")
       sys.exit(1)
 
-  OPTIONS.info_dict = common.LoadInfoDict(OPTIONS.input_tmp, OPTIONS.input_tmp)
+  OPTIONS.info_dict = common.LoadInfoDict(OPTIONS.input_tmp, repacking=True)
 
   has_recovery = OPTIONS.info_dict.get("no_recovery") != "true"
 
-  # {vendor,product}.img is unlike system.img or system_other.img. Because it
-  # could be built from source, or dropped into target_files.zip as a prebuilt
-  # blob. We consider either of them as {vendor,product}.img being available,
-  # which could be used when generating vbmeta.img for AVB.
+  # {vendor,odm,product,product_services}.img are unlike system.img or
+  # system_other.img. Because it could be built from source, or dropped into
+  # target_files.zip as a prebuilt blob. We consider either of them as
+  # {vendor,product,product_services}.img being available, which could be
+  # used when generating vbmeta.img for AVB.
   has_vendor = (os.path.isdir(os.path.join(OPTIONS.input_tmp, "VENDOR")) or
                 os.path.exists(os.path.join(OPTIONS.input_tmp, "IMAGES",
                                             "vendor.img")))
+  has_odm = (os.path.isdir(os.path.join(OPTIONS.input_tmp, "ODM")) or
+             os.path.exists(os.path.join(OPTIONS.input_tmp, "IMAGES",
+                                         "odm.img")))
   has_product = (os.path.isdir(os.path.join(OPTIONS.input_tmp, "PRODUCT")) or
                  os.path.exists(os.path.join(OPTIONS.input_tmp, "IMAGES",
                                              "product.img")))
+  has_product_services = (os.path.isdir(os.path.join(OPTIONS.input_tmp,
+                                                     "PRODUCT_SERVICES")) or
+                          os.path.exists(os.path.join(OPTIONS.input_tmp,
+                                                      "IMAGES",
+                                                      "product_services.img")))
   has_system_other = os.path.isdir(os.path.join(OPTIONS.input_tmp,
                                                 "SYSTEM_OTHER"))
 
@@ -682,7 +752,7 @@
   partitions = dict()
 
   def banner(s):
-    print("\n\n++++ " + s + " ++++\n\n")
+    logger.info("\n\n++++ " + s + " ++++\n\n")
 
   banner("boot")
   # common.GetBootableImage() returns the image directly if present.
@@ -734,6 +804,14 @@
     banner("product")
     partitions['product'] = AddProduct(output_zip)
 
+  if has_product_services:
+    banner("product_services")
+    partitions['product_services'] = AddProductServices(output_zip)
+
+  if has_odm:
+    banner("odm")
+    partitions['odm'] = AddOdm(output_zip)
+
   if has_system_other:
     banner("system_other")
     AddSystemOther(output_zip)
@@ -753,8 +831,41 @@
     partitions['dtbo'] = AddDtbo(output_zip)
 
   if OPTIONS.info_dict.get("avb_enable") == "true":
+    # vbmeta_partitions includes the partitions that should be included into
+    # top-level vbmeta.img, which are the ones that are not included in any
+    # chained VBMeta image plus the chained VBMeta images themselves.
+    vbmeta_partitions = common.AVB_PARTITIONS[:]
+
+    vbmeta_system = OPTIONS.info_dict.get("avb_vbmeta_system", "").strip()
+    if vbmeta_system:
+      banner("vbmeta_system")
+      partitions["vbmeta_system"] = AddVBMeta(
+          output_zip, partitions, "vbmeta_system", vbmeta_system.split())
+      vbmeta_partitions = [
+          item for item in vbmeta_partitions
+          if item not in vbmeta_system.split()]
+      vbmeta_partitions.append("vbmeta_system")
+
+    vbmeta_vendor = OPTIONS.info_dict.get("avb_vbmeta_vendor", "").strip()
+    if vbmeta_vendor:
+      banner("vbmeta_vendor")
+      partitions["vbmeta_vendor"] = AddVBMeta(
+          output_zip, partitions, "vbmeta_vendor", vbmeta_vendor.split())
+      vbmeta_partitions = [
+          item for item in vbmeta_partitions
+          if item not in vbmeta_vendor.split()]
+      vbmeta_partitions.append("vbmeta_vendor")
+
     banner("vbmeta")
-    AddVBMeta(output_zip, partitions)
+    AddVBMeta(output_zip, partitions, "vbmeta", vbmeta_partitions)
+
+  if OPTIONS.info_dict.get("build_super_partition"):
+    banner("super_empty")
+    AddSuperEmpty(output_zip)
+
+    if OPTIONS.info_dict.get("dynamic_partition_retrofit") == "true":
+      banner("super split images")
+      AddSuperSplit(output_zip)
 
   banner("radio")
   ab_partitions_txt = os.path.join(OPTIONS.input_tmp, "META",
@@ -763,14 +874,13 @@
     with open(ab_partitions_txt, 'r') as f:
       ab_partitions = f.readlines()
 
-    # For devices using A/B update, copy over images from RADIO/ and/or
-    # VENDOR_IMAGES/ to IMAGES/ and make sure we have all the needed
-    # images ready under IMAGES/. All images should have '.img' as extension.
-    AddRadioImagesForAbOta(output_zip, ab_partitions)
+    # For devices using A/B update, make sure we have all the needed images
+    # ready under IMAGES/ or RADIO/.
+    CheckAbOtaImages(output_zip, ab_partitions)
 
-    # Generate care_map.txt for system and vendor partitions (if present), then
-    # write this file to target_files package.
-    AddCareMapTxtForAbOta(output_zip, ab_partitions, partitions)
+    # Generate care_map.pb for ab_partitions, then write this file to
+    # target_files package.
+    AddCareMapForAbOta(output_zip, ab_partitions, partitions)
 
   # Radio images that need to be packed into IMAGES/, and product-img.zip.
   pack_radioimages_txt = os.path.join(
@@ -810,20 +920,21 @@
                        "is_signing"],
       extra_option_handler=option_handler)
 
-
   if len(args) != 1:
     common.Usage(__doc__)
     sys.exit(1)
 
+  common.InitLogging()
+
   AddImagesToTargetFiles(args[0])
-  print("done.")
+  logger.info("done.")
 
 if __name__ == '__main__':
   try:
     common.CloseInheritedPipes()
     main(sys.argv[1:])
-  except common.ExternalError as e:
-    print("\n   ERROR: %s\n" % (e,))
+  except common.ExternalError:
+    logger.exception("\n   ERROR:\n")
     sys.exit(1)
   finally:
     common.Cleanup()
diff --git a/tools/releasetools/blockimgdiff.py b/tools/releasetools/blockimgdiff.py
index 24c5b2d..2d20e23 100644
--- a/tools/releasetools/blockimgdiff.py
+++ b/tools/releasetools/blockimgdiff.py
@@ -19,11 +19,11 @@
 import functools
 import heapq
 import itertools
+import logging
 import multiprocessing
 import os
 import os.path
 import re
-import subprocess
 import sys
 import threading
 from collections import deque, OrderedDict
@@ -32,9 +32,10 @@
 import common
 from rangelib import RangeSet
 
-
 __all__ = ["EmptyImage", "DataImage", "BlockImageDiff"]
 
+logger = logging.getLogger(__name__)
+
 
 def compute_patch(srcfile, tgtfile, imgdiff=False):
   patchfile = common.MakeTempFile(prefix='patch-')
@@ -44,11 +45,10 @@
 
   # Don't dump the bsdiff/imgdiff commands, which are not useful for the case
   # here, since they contain temp filenames only.
-  p = common.Run(cmd, verbose=False, stdout=subprocess.PIPE,
-                 stderr=subprocess.STDOUT)
-  output, _ = p.communicate()
+  proc = common.Run(cmd, verbose=False)
+  output, _ = proc.communicate()
 
-  if p.returncode != 0:
+  if proc.returncode != 0:
     raise ValueError(output)
 
   with open(patchfile, 'rb') as f:
@@ -163,7 +163,7 @@
 
   def RangeSha1(self, ranges):
     h = sha1()
-    for data in self._GetRangeData(ranges):
+    for data in self._GetRangeData(ranges): # pylint: disable=not-an-iterable
       h.update(data)
     return h.hexdigest()
 
@@ -177,7 +177,7 @@
       return sha1(self.data).hexdigest()
 
   def WriteRangeDataToFd(self, ranges, fd):
-    for data in self._GetRangeData(ranges):
+    for data in self._GetRangeData(ranges): # pylint: disable=not-an-iterable
       fd.write(data)
 
 
@@ -270,7 +270,6 @@
   USED_IMGDIFF_LARGE_APK = "Large APK files split and diff'd with imgdiff"
 
   # Reasons for not applying imgdiff on APKs.
-  SKIPPED_TRIMMED = "Not used imgdiff due to trimmed RangeSet"
   SKIPPED_NONMONOTONIC = "Not used imgdiff due to having non-monotonic ranges"
   SKIPPED_SHARED_BLOCKS = "Not used imgdiff due to using shared blocks"
   SKIPPED_INCOMPLETE = "Not used imgdiff due to incomplete RangeSet"
@@ -279,7 +278,6 @@
   REASONS = (
       USED_IMGDIFF,
       USED_IMGDIFF_LARGE_APK,
-      SKIPPED_TRIMMED,
       SKIPPED_NONMONOTONIC,
       SKIPPED_SHARED_BLOCKS,
       SKIPPED_INCOMPLETE,
@@ -309,8 +307,8 @@
     """Prints a report of the collected imgdiff stats."""
 
     def print_header(header, separator):
-      print(header)
-      print(separator * len(header) + '\n')
+      logger.info(header)
+      logger.info(separator * len(header) + '\n')
 
     print_header('  Imgdiff Stats Report  ', '=')
     for key in self.REASONS:
@@ -319,49 +317,48 @@
       values = self.stats[key]
       section_header = ' {} (count: {}) '.format(key, len(values))
       print_header(section_header, '-')
-      print(''.join(['  {}\n'.format(name) for name in values]))
+      logger.info(''.join(['  {}\n'.format(name) for name in values]))
 
 
-# BlockImageDiff works on two image objects.  An image object is
-# anything that provides the following attributes:
-#
-#    blocksize: the size in bytes of a block, currently must be 4096.
-#
-#    total_blocks: the total size of the partition/image, in blocks.
-#
-#    care_map: a RangeSet containing which blocks (in the range [0,
-#      total_blocks) we actually care about; i.e. which blocks contain
-#      data.
-#
-#    file_map: a dict that partitions the blocks contained in care_map
-#      into smaller domains that are useful for doing diffs on.
-#      (Typically a domain is a file, and the key in file_map is the
-#      pathname.)
-#
-#    clobbered_blocks: a RangeSet containing which blocks contain data
-#      but may be altered by the FS. They need to be excluded when
-#      verifying the partition integrity.
-#
-#    ReadRangeSet(): a function that takes a RangeSet and returns the
-#      data contained in the image blocks of that RangeSet.  The data
-#      is returned as a list or tuple of strings; concatenating the
-#      elements together should produce the requested data.
-#      Implementations are free to break up the data into list/tuple
-#      elements in any way that is convenient.
-#
-#    RangeSha1(): a function that returns (as a hex string) the SHA-1
-#      hash of all the data in the specified range.
-#
-#    TotalSha1(): a function that returns (as a hex string) the SHA-1
-#      hash of all the data in the image (ie, all the blocks in the
-#      care_map minus clobbered_blocks, or including the clobbered
-#      blocks if include_clobbered_blocks is True).
-#
-# When creating a BlockImageDiff, the src image may be None, in which
-# case the list of transfers produced will never read from the
-# original image.
-
 class BlockImageDiff(object):
+  """Generates the diff of two block image objects.
+
+  BlockImageDiff works on two image objects. An image object is anything that
+  provides the following attributes:
+
+     blocksize: the size in bytes of a block, currently must be 4096.
+
+     total_blocks: the total size of the partition/image, in blocks.
+
+     care_map: a RangeSet containing which blocks (in the range [0,
+       total_blocks) we actually care about; i.e. which blocks contain data.
+
+     file_map: a dict that partitions the blocks contained in care_map into
+         smaller domains that are useful for doing diffs on. (Typically a domain
+         is a file, and the key in file_map is the pathname.)
+
+     clobbered_blocks: a RangeSet containing which blocks contain data but may
+         be altered by the FS. They need to be excluded when verifying the
+         partition integrity.
+
+     ReadRangeSet(): a function that takes a RangeSet and returns the data
+         contained in the image blocks of that RangeSet. The data is returned as
+         a list or tuple of strings; concatenating the elements together should
+         produce the requested data. Implementations are free to break up the
+         data into list/tuple elements in any way that is convenient.
+
+     RangeSha1(): a function that returns (as a hex string) the SHA-1 hash of
+         all the data in the specified range.
+
+     TotalSha1(): a function that returns (as a hex string) the SHA-1 hash of
+         all the data in the image (ie, all the blocks in the care_map minus
+         clobbered_blocks, or including the clobbered blocks if
+         include_clobbered_blocks is True).
+
+  When creating a BlockImageDiff, the src image may be None, in which case the
+  list of transfers produced will never read from the original image.
+  """
+
   def __init__(self, tgt, src=None, threads=None, version=4,
                disable_imgdiff=False):
     if threads is None:
@@ -449,10 +446,6 @@
       self.imgdiff_stats.Log(name, ImgdiffStats.SKIPPED_INCOMPLETE)
       return False
 
-    if tgt_ranges.extra.get('trimmed') or src_ranges.extra.get('trimmed'):
-      self.imgdiff_stats.Log(name, ImgdiffStats.SKIPPED_TRIMMED)
-      return False
-
     reason = (ImgdiffStats.USED_IMGDIFF_LARGE_APK if large_apk
               else ImgdiffStats.USED_IMGDIFF)
     self.imgdiff_stats.Log(name, reason)
@@ -492,7 +485,7 @@
     self.WriteTransfers(prefix)
 
     # Report the imgdiff stats.
-    if common.OPTIONS.verbose and not self.disable_imgdiff:
+    if not self.disable_imgdiff:
       self.imgdiff_stats.Report()
 
   def WriteTransfers(self, prefix):
@@ -656,6 +649,14 @@
 
     self.touched_src_sha1 = self.src.RangeSha1(self.touched_src_ranges)
 
+    if self.tgt.hashtree_info:
+      out.append("compute_hash_tree {} {} {} {} {}\n".format(
+          self.tgt.hashtree_info.hashtree_range.to_string_raw(),
+          self.tgt.hashtree_info.filesystem_range.to_string_raw(),
+          self.tgt.hashtree_info.hash_algorithm,
+          self.tgt.hashtree_info.salt,
+          self.tgt.hashtree_info.root_hash))
+
     # Zero out extended blocks as a workaround for bug 20881595.
     if self.tgt.extended:
       assert (WriteSplitTransfers(out, "zero", self.tgt.extended) ==
@@ -694,16 +695,17 @@
     OPTIONS = common.OPTIONS
     if OPTIONS.cache_size is not None:
       max_allowed = OPTIONS.cache_size * OPTIONS.stash_threshold
-      print("max stashed blocks: %d  (%d bytes), "
-            "limit: %d bytes (%.2f%%)\n" % (
-                max_stashed_blocks, self._max_stashed_size, max_allowed,
-                self._max_stashed_size * 100.0 / max_allowed))
+      logger.info(
+          "max stashed blocks: %d  (%d bytes), limit: %d bytes (%.2f%%)\n",
+          max_stashed_blocks, self._max_stashed_size, max_allowed,
+          self._max_stashed_size * 100.0 / max_allowed)
     else:
-      print("max stashed blocks: %d  (%d bytes), limit: <unknown>\n" % (
-          max_stashed_blocks, self._max_stashed_size))
+      logger.info(
+          "max stashed blocks: %d  (%d bytes), limit: <unknown>\n",
+          max_stashed_blocks, self._max_stashed_size)
 
   def ReviseStashSize(self):
-    print("Revising stash size...")
+    logger.info("Revising stash size...")
     stash_map = {}
 
     # Create the map between a stash and its def/use points. For example, for a
@@ -748,7 +750,7 @@
           # that will use this stash and replace the command with "new".
           use_cmd = stash_map[stash_raw_id][2]
           replaced_cmds.append(use_cmd)
-          print("%10d  %9s  %s" % (sr.size(), "explicit", use_cmd))
+          logger.info("%10d  %9s  %s", sr.size(), "explicit", use_cmd)
         else:
           # Update the stashes map.
           if sh in stashes:
@@ -764,7 +766,7 @@
         if xf.src_ranges.overlaps(xf.tgt_ranges):
           if stashed_blocks + xf.src_ranges.size() > max_allowed:
             replaced_cmds.append(xf)
-            print("%10d  %9s  %s" % (xf.src_ranges.size(), "implicit", xf))
+            logger.info("%10d  %9s  %s", xf.src_ranges.size(), "implicit", xf)
 
       # Replace the commands in replaced_cmds with "new"s.
       for cmd in replaced_cmds:
@@ -790,28 +792,29 @@
           stashes.pop(sh)
 
     num_of_bytes = new_blocks * self.tgt.blocksize
-    print("  Total %d blocks (%d bytes) are packed as new blocks due to "
-          "insufficient cache size." % (new_blocks, num_of_bytes))
+    logger.info(
+        "  Total %d blocks (%d bytes) are packed as new blocks due to "
+        "insufficient cache size.", new_blocks, num_of_bytes)
     return new_blocks
 
   def ComputePatches(self, prefix):
-    print("Reticulating splines...")
+    logger.info("Reticulating splines...")
     diff_queue = []
     patch_num = 0
     with open(prefix + ".new.dat", "wb") as new_f:
       for index, xf in enumerate(self.transfers):
         if xf.style == "zero":
           tgt_size = xf.tgt_ranges.size() * self.tgt.blocksize
-          print("%10d %10d (%6.2f%%) %7s %s %s" % (
-              tgt_size, tgt_size, 100.0, xf.style, xf.tgt_name,
-              str(xf.tgt_ranges)))
+          logger.info(
+              "%10d %10d (%6.2f%%) %7s %s %s", tgt_size, tgt_size, 100.0,
+              xf.style, xf.tgt_name, str(xf.tgt_ranges))
 
         elif xf.style == "new":
           self.tgt.WriteRangeDataToFd(xf.tgt_ranges, new_f)
           tgt_size = xf.tgt_ranges.size() * self.tgt.blocksize
-          print("%10d %10d (%6.2f%%) %7s %s %s" % (
-              tgt_size, tgt_size, 100.0, xf.style,
-              xf.tgt_name, str(xf.tgt_ranges)))
+          logger.info(
+              "%10d %10d (%6.2f%%) %7s %s %s", tgt_size, tgt_size, 100.0,
+              xf.style, xf.tgt_name, str(xf.tgt_ranges))
 
         elif xf.style == "diff":
           # We can't compare src and tgt directly because they may have
@@ -829,21 +832,18 @@
             xf.patch = None
             tgt_size = xf.tgt_ranges.size() * self.tgt.blocksize
             if xf.src_ranges != xf.tgt_ranges:
-              print("%10d %10d (%6.2f%%) %7s %s %s (from %s)" % (
-                  tgt_size, tgt_size, 100.0, xf.style,
+              logger.info(
+                  "%10d %10d (%6.2f%%) %7s %s %s (from %s)", tgt_size, tgt_size,
+                  100.0, xf.style,
                   xf.tgt_name if xf.tgt_name == xf.src_name else (
                       xf.tgt_name + " (from " + xf.src_name + ")"),
-                  str(xf.tgt_ranges), str(xf.src_ranges)))
+                  str(xf.tgt_ranges), str(xf.src_ranges))
           else:
             if xf.patch:
-              # We have already generated the patch with imgdiff. Check if the
-              # transfer is intact.
+              # We have already generated the patch with imgdiff, while
+              # splitting large APKs (i.e. in FindTransfers()).
               assert not self.disable_imgdiff
               imgdiff = True
-              if (xf.src_ranges.extra.get('trimmed') or
-                  xf.tgt_ranges.extra.get('trimmed')):
-                imgdiff = False
-                xf.patch = None
             else:
               imgdiff = self.CanUseImgdiff(
                   xf.tgt_name, xf.tgt_ranges, xf.src_ranges)
@@ -856,9 +856,9 @@
 
     if diff_queue:
       if self.threads > 1:
-        print("Computing patches (using %d threads)..." % (self.threads,))
+        logger.info("Computing patches (using %d threads)...", self.threads)
       else:
-        print("Computing patches...")
+        logger.info("Computing patches...")
 
       diff_total = len(diff_queue)
       patches = [None] * diff_total
@@ -880,13 +880,6 @@
             xf_index, imgdiff, patch_index = diff_queue.pop()
             xf = self.transfers[xf_index]
 
-            if sys.stdout.isatty():
-              diff_left = len(diff_queue)
-              progress = (diff_total - diff_left) * 100 / diff_total
-              # '\033[K' is to clear to EOL.
-              print(' [%3d%%] %s\033[K' % (progress, xf.tgt_name), end='\r')
-              sys.stdout.flush()
-
           patch = xf.patch
           if not patch:
             src_ranges = xf.src_ranges
@@ -924,13 +917,10 @@
       while threads:
         threads.pop().join()
 
-      if sys.stdout.isatty():
-        print('\n')
-
       if error_messages:
-        print('ERROR:')
-        print('\n'.join(error_messages))
-        print('\n\n\n')
+        logger.error('ERROR:')
+        logger.error('\n'.join(error_messages))
+        logger.error('\n\n\n')
         sys.exit(1)
     else:
       patches = []
@@ -944,14 +934,13 @@
         offset += xf.patch_len
         patch_fd.write(patch)
 
-        if common.OPTIONS.verbose:
-          tgt_size = xf.tgt_ranges.size() * self.tgt.blocksize
-          print("%10d %10d (%6.2f%%) %7s %s %s %s" % (
-              xf.patch_len, tgt_size, xf.patch_len * 100.0 / tgt_size,
-              xf.style,
-              xf.tgt_name if xf.tgt_name == xf.src_name else (
-                  xf.tgt_name + " (from " + xf.src_name + ")"),
-              xf.tgt_ranges, xf.src_ranges))
+        tgt_size = xf.tgt_ranges.size() * self.tgt.blocksize
+        logger.info(
+            "%10d %10d (%6.2f%%) %7s %s %s %s", xf.patch_len, tgt_size,
+            xf.patch_len * 100.0 / tgt_size, xf.style,
+            xf.tgt_name if xf.tgt_name == xf.src_name else (
+                xf.tgt_name + " (from " + xf.src_name + ")"),
+            xf.tgt_ranges, xf.src_ranges)
 
   def AssertSha1Good(self):
     """Check the SHA-1 of the src & tgt blocks in the transfer list.
@@ -999,13 +988,19 @@
           assert touched[i] == 0
           touched[i] = 1
 
+    if self.tgt.hashtree_info:
+      for s, e in self.tgt.hashtree_info.hashtree_range:
+        for i in range(s, e):
+          assert touched[i] == 0
+          touched[i] = 1
+
     # Check that we've written every target block.
     for s, e in self.tgt.care_map:
       for i in range(s, e):
         assert touched[i] == 1
 
   def ImproveVertexSequence(self):
-    print("Improving vertex order...")
+    logger.info("Improving vertex order...")
 
     # At this point our digraph is acyclic; we reversed any edges that
     # were backwards in the heuristically-generated sequence.  The
@@ -1045,42 +1040,6 @@
     for i, xf in enumerate(L):
       xf.order = i
 
-  def RemoveBackwardEdges(self):
-    print("Removing backward edges...")
-    in_order = 0
-    out_of_order = 0
-    lost_source = 0
-
-    for xf in self.transfers:
-      lost = 0
-      size = xf.src_ranges.size()
-      for u in xf.goes_before:
-        # xf should go before u
-        if xf.order < u.order:
-          # it does, hurray!
-          in_order += 1
-        else:
-          # it doesn't, boo.  trim the blocks that u writes from xf's
-          # source, so that xf can go after u.
-          out_of_order += 1
-          assert xf.src_ranges.overlaps(u.tgt_ranges)
-          xf.src_ranges = xf.src_ranges.subtract(u.tgt_ranges)
-          xf.src_ranges.extra['trimmed'] = True
-
-      if xf.style == "diff" and not xf.src_ranges:
-        # nothing left to diff from; treat as new data
-        xf.style = "new"
-
-      lost = size - xf.src_ranges.size()
-      lost_source += lost
-
-    print(("  %d/%d dependencies (%.2f%%) were violated; "
-           "%d source blocks removed.") %
-          (out_of_order, in_order + out_of_order,
-           (out_of_order * 100.0 / (in_order + out_of_order))
-           if (in_order + out_of_order) else 0.0,
-           lost_source))
-
   def ReverseBackwardEdges(self):
     """Reverse unsatisfying edges and compute pairs of stashed blocks.
 
@@ -1093,7 +1052,7 @@
     blocks will be written to the same stash slot in WriteTransfers().
     """
 
-    print("Reversing backward edges...")
+    logger.info("Reversing backward edges...")
     in_order = 0
     out_of_order = 0
     stash_raw_id = 0
@@ -1125,15 +1084,15 @@
           xf.goes_after[u] = None    # value doesn't matter
           u.goes_before[xf] = None
 
-    print(("  %d/%d dependencies (%.2f%%) were violated; "
-           "%d source blocks stashed.") %
-          (out_of_order, in_order + out_of_order,
-           (out_of_order * 100.0 / (in_order + out_of_order))
-           if (in_order + out_of_order) else 0.0,
-           stash_size))
+    logger.info(
+        "  %d/%d dependencies (%.2f%%) were violated; %d source blocks "
+        "stashed.", out_of_order, in_order + out_of_order,
+        (out_of_order * 100.0 / (in_order + out_of_order)) if (
+            in_order + out_of_order) else 0.0,
+        stash_size)
 
   def FindVertexSequence(self):
-    print("Finding vertex sequence...")
+    logger.info("Finding vertex sequence...")
 
     # This is based on "A Fast & Effective Heuristic for the Feedback
     # Arc Set Problem" by P. Eades, X. Lin, and W.F. Smyth.  Think of
@@ -1246,7 +1205,7 @@
     self.transfers = new_transfers
 
   def GenerateDigraph(self):
-    print("Generating digraph...")
+    logger.info("Generating digraph...")
 
     # Each item of source_ranges will be:
     #   - None, if that block is not used as a source,
@@ -1412,9 +1371,9 @@
 
         if tgt_changed < tgt_size * crop_threshold:
           assert tgt_changed + tgt_skipped.size() == tgt_size
-          print('%10d %10d (%6.2f%%) %s' % (
-              tgt_skipped.size(), tgt_size,
-              tgt_skipped.size() * 100.0 / tgt_size, tgt_name))
+          logger.info(
+              '%10d %10d (%6.2f%%) %s', tgt_skipped.size(), tgt_size,
+              tgt_skipped.size() * 100.0 / tgt_size, tgt_name)
           AddSplitTransfers(
               "%s-skipped" % (tgt_name,),
               "%s-skipped" % (src_name,),
@@ -1528,9 +1487,9 @@
                "--block-limit={}".format(max_blocks_per_transfer),
                "--split-info=" + patch_info_file,
                src_file, tgt_file, patch_file]
-        p = common.Run(cmd, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
-        imgdiff_output, _ = p.communicate()
-        assert p.returncode == 0, \
+        proc = common.Run(cmd)
+        imgdiff_output, _ = proc.communicate()
+        assert proc.returncode == 0, \
             "Failed to create imgdiff patch between {} and {}:\n{}".format(
                 src_name, tgt_name, imgdiff_output)
 
@@ -1555,7 +1514,7 @@
                                    split_src_ranges,
                                    patch_content))
 
-    print("Finding transfers...")
+    logger.info("Finding transfers...")
 
     large_apks = []
     split_large_apks = []
@@ -1580,6 +1539,9 @@
         AddTransfer(tgt_fn, None, tgt_ranges, empty, "new", self.transfers)
         continue
 
+      elif tgt_fn == "__HASHTREE":
+        continue
+
       elif tgt_fn in self.src.file_map:
         # Look for an exact pathname match in the source.
         AddTransfer(tgt_fn, tgt_fn, tgt_ranges, self.src.file_map[tgt_fn],
diff --git a/tools/releasetools/build_image.py b/tools/releasetools/build_image.py
index ca96d01..9612499 100755
--- a/tools/releasetools/build_image.py
+++ b/tools/releasetools/build_image.py
@@ -18,301 +18,89 @@
 Builds output_image from the given input_directory, properties_file,
 and writes the image to target_output_directory.
 
+If argument generated_prop_file exists, write additional properties to the file.
+
 Usage:  build_image.py input_directory properties_file output_image \\
-            target_output_directory
+            target_output_directory [generated_prop_file]
 """
 
 from __future__ import print_function
 
+import logging
 import os
 import os.path
 import re
-import shlex
 import shutil
-import subprocess
 import sys
 
 import common
-import sparse_img
+import verity_utils
 
+logger = logging.getLogger(__name__)
 
 OPTIONS = common.OPTIONS
-
-FIXED_SALT = "aee087a5be3b982978c923f566a94613496b417f2af592639bc80d141e34dfe7"
-BLOCK_SIZE = 4096
+BLOCK_SIZE = common.BLOCK_SIZE
+BYTES_IN_MB = 1024 * 1024
 
 
-def RunCommand(cmd, verbose=None):
-  """Echo and run the given command.
+class BuildImageError(Exception):
+  """An Exception raised during image building."""
+
+  def __init__(self, message):
+    Exception.__init__(self, message)
+
+
+def GetDiskUsage(path):
+  """Returns the number of bytes that "path" occupies on host.
 
   Args:
-    cmd: the command represented as a list of strings.
-    verbose: show commands being executed.
+    path: The directory or file to calculate size on.
+
   Returns:
-    A tuple of the output and the exit code.
+    The number of bytes based on a 1K block_size.
   """
-  if verbose is None:
-    verbose = OPTIONS.verbose
-  if verbose:
-    print("Running: " + " ".join(cmd))
-  p = subprocess.Popen(cmd, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
-  output, _ = p.communicate()
-
-  if verbose:
-    print(output.rstrip())
-  return (output, p.returncode)
+  cmd = ["du", "-k", "-s", path]
+  output = common.RunAndCheckOutput(cmd, verbose=False)
+  return int(output.split()[0]) * 1024
 
 
-def GetVerityFECSize(partition_size):
-  cmd = ["fec", "-s", str(partition_size)]
-  output, exit_code = RunCommand(cmd, False)
-  if exit_code != 0:
-    return False, 0
-  return True, int(output)
-
-
-def GetVerityTreeSize(partition_size):
-  cmd = ["build_verity_tree", "-s", str(partition_size)]
-  output, exit_code = RunCommand(cmd, False)
-  if exit_code != 0:
-    return False, 0
-  return True, int(output)
-
-
-def GetVerityMetadataSize(partition_size):
-  cmd = ["system/extras/verity/build_verity_metadata.py", "size",
-         str(partition_size)]
-  output, exit_code = RunCommand(cmd, False)
-  if exit_code != 0:
-    return False, 0
-  return True, int(output)
-
-
-def GetVeritySize(partition_size, fec_supported):
-  success, verity_tree_size = GetVerityTreeSize(partition_size)
-  if not success:
-    return 0
-  success, verity_metadata_size = GetVerityMetadataSize(partition_size)
-  if not success:
-    return 0
-  verity_size = verity_tree_size + verity_metadata_size
-  if fec_supported:
-    success, fec_size = GetVerityFECSize(partition_size + verity_size)
-    if not success:
-      return 0
-    return verity_size + fec_size
-  return verity_size
-
-
-def GetSimgSize(image_file):
-  simg = sparse_img.SparseImage(image_file, build_map=False)
-  return simg.blocksize * simg.total_blocks
-
-
-def ZeroPadSimg(image_file, pad_size):
-  blocks = pad_size // BLOCK_SIZE
-  print("Padding %d blocks (%d bytes)" % (blocks, pad_size))
-  simg = sparse_img.SparseImage(image_file, mode="r+b", build_map=False)
-  simg.AppendFillChunk(0, blocks)
-
-
-def AVBCalcMaxImageSize(avbtool, footer_type, partition_size, additional_args):
-  """Calculates max image size for a given partition size.
+def GetInodeUsage(path):
+  """Returns the number of inodes that "path" occupies on host.
 
   Args:
-    avbtool: String with path to avbtool.
-    footer_type: 'hash' or 'hashtree' for generating footer.
-    partition_size: The size of the partition in question.
-    additional_args: Additional arguments to pass to 'avbtool
-      add_hashtree_image'.
+    path: The directory or file to calculate inode number on.
+
   Returns:
-    The maximum image size or 0 if an error occurred.
+    The number of inodes used.
   """
-  cmd = [avbtool, "add_%s_footer" % footer_type,
-         "--partition_size", partition_size, "--calc_max_image_size"]
-  cmd.extend(shlex.split(additional_args))
-
-  (output, exit_code) = RunCommand(cmd)
-  if exit_code != 0:
-    return 0
-  else:
-    return int(output)
+  cmd = ["find", path, "-print"]
+  output = common.RunAndCheckOutput(cmd, verbose=False)
+  # increase by > 4% as number of files and directories is not whole picture.
+  return output.count('\n') * 25 // 24
 
 
-def AVBAddFooter(image_path, avbtool, footer_type, partition_size,
-                 partition_name, key_path, algorithm, salt,
-                 additional_args):
-  """Adds dm-verity hashtree and AVB metadata to an image.
+def GetFilesystemCharacteristics(sparse_image_path):
+  """Returns various filesystem characteristics of "sparse_image_path".
 
   Args:
-    image_path: Path to image to modify.
-    avbtool: String with path to avbtool.
-    footer_type: 'hash' or 'hashtree' for generating footer.
-    partition_size: The size of the partition in question.
-    partition_name: The name of the partition - will be embedded in metadata.
-    key_path: Path to key to use or None.
-    algorithm: Name of algorithm to use or None.
-    salt: The salt to use (a hexadecimal string) or None.
-    additional_args: Additional arguments to pass to 'avbtool
-        add_hashtree_image'.
+    sparse_image_path: The file to analyze.
 
   Returns:
-    True if the operation succeeded.
+    The characteristics dictionary.
   """
-  cmd = [avbtool, "add_%s_footer" % footer_type,
-         "--partition_size", partition_size,
-         "--partition_name", partition_name,
-         "--image", image_path]
+  unsparse_image_path = UnsparseImage(sparse_image_path, replace=False)
 
-  if key_path and algorithm:
-    cmd.extend(["--key", key_path, "--algorithm", algorithm])
-  if salt:
-    cmd.extend(["--salt", salt])
-
-  cmd.extend(shlex.split(additional_args))
-
-  (_, exit_code) = RunCommand(cmd)
-  return exit_code == 0
-
-
-def AdjustPartitionSizeForVerity(partition_size, fec_supported):
-  """Modifies the provided partition size to account for the verity metadata.
-
-  This information is used to size the created image appropriately.
-
-  Args:
-    partition_size: the size of the partition to be verified.
-
-  Returns:
-    A tuple of the size of the partition adjusted for verity metadata, and
-    the size of verity metadata.
-  """
-  key = "%d %d" % (partition_size, fec_supported)
-  if key in AdjustPartitionSizeForVerity.results:
-    return AdjustPartitionSizeForVerity.results[key]
-
-  hi = partition_size
-  if hi % BLOCK_SIZE != 0:
-    hi = (hi // BLOCK_SIZE) * BLOCK_SIZE
-
-  # verity tree and fec sizes depend on the partition size, which
-  # means this estimate is always going to be unnecessarily small
-  verity_size = GetVeritySize(hi, fec_supported)
-  lo = partition_size - verity_size
-  result = lo
-
-  # do a binary search for the optimal size
-  while lo < hi:
-    i = ((lo + hi) // (2 * BLOCK_SIZE)) * BLOCK_SIZE
-    v = GetVeritySize(i, fec_supported)
-    if i + v <= partition_size:
-      if result < i:
-        result = i
-        verity_size = v
-      lo = i + BLOCK_SIZE
-    else:
-      hi = i
-
-  if OPTIONS.verbose:
-    print("Adjusted partition size for verity, partition_size: {},"
-          " verity_size: {}".format(result, verity_size))
-  AdjustPartitionSizeForVerity.results[key] = (result, verity_size)
-  return (result, verity_size)
-
-
-AdjustPartitionSizeForVerity.results = {}
-
-
-def BuildVerityFEC(sparse_image_path, verity_path, verity_fec_path,
-                   padding_size):
-  cmd = ["fec", "-e", "-p", str(padding_size), sparse_image_path,
-         verity_path, verity_fec_path]
-  output, exit_code = RunCommand(cmd)
-  if exit_code != 0:
-    print("Could not build FEC data! Error: %s" % output)
-    return False
-  return True
-
-
-def BuildVerityTree(sparse_image_path, verity_image_path, prop_dict):
-  cmd = ["build_verity_tree", "-A", FIXED_SALT, sparse_image_path,
-         verity_image_path]
-  output, exit_code = RunCommand(cmd)
-  if exit_code != 0:
-    print("Could not build verity tree! Error: %s" % output)
-    return False
-  root, salt = output.split()
-  prop_dict["verity_root_hash"] = root
-  prop_dict["verity_salt"] = salt
-  return True
-
-
-def BuildVerityMetadata(image_size, verity_metadata_path, root_hash, salt,
-                        block_device, signer_path, key, signer_args,
-                        verity_disable):
-  cmd = ["system/extras/verity/build_verity_metadata.py", "build",
-         str(image_size), verity_metadata_path, root_hash, salt, block_device,
-         signer_path, key]
-  if signer_args:
-    cmd.append("--signer_args=\"%s\"" % (' '.join(signer_args),))
-  if verity_disable:
-    cmd.append("--verity_disable")
-  output, exit_code = RunCommand(cmd)
-  if exit_code != 0:
-    print("Could not build verity metadata! Error: %s" % output)
-    return False
-  return True
-
-
-def Append2Simg(sparse_image_path, unsparse_image_path, error_message):
-  """Appends the unsparse image to the given sparse image.
-
-  Args:
-    sparse_image_path: the path to the (sparse) image
-    unsparse_image_path: the path to the (unsparse) image
-  Returns:
-    True on success, False on failure.
-  """
-  cmd = ["append2simg", sparse_image_path, unsparse_image_path]
-  output, exit_code = RunCommand(cmd)
-  if exit_code != 0:
-    print("%s: %s" % (error_message, output))
-    return False
-  return True
-
-
-def Append(target, file_to_append, error_message):
-  """Appends file_to_append to target."""
+  cmd = ["tune2fs", "-l", unsparse_image_path]
   try:
-    with open(target, "a") as out_file, open(file_to_append, "r") as input_file:
-      for line in input_file:
-        out_file.write(line)
-  except IOError:
-    print(error_message)
-    return False
-  return True
-
-
-def BuildVerifiedImage(data_image_path, verity_image_path,
-                       verity_metadata_path, verity_fec_path,
-                       padding_size, fec_supported):
-  if not Append(verity_image_path, verity_metadata_path,
-                "Could not append verity metadata!"):
-    return False
-
-  if fec_supported:
-    # build FEC for the entire partition, including metadata
-    if not BuildVerityFEC(data_image_path, verity_image_path,
-                          verity_fec_path, padding_size):
-      return False
-
-    if not Append(verity_image_path, verity_fec_path, "Could not append FEC!"):
-      return False
-
-  if not Append2Simg(data_image_path, verity_image_path,
-                     "Could not append verity data!"):
-    return False
-  return True
+    output = common.RunAndCheckOutput(cmd, verbose=False)
+  finally:
+    os.remove(unsparse_image_path)
+  fs_dict = {}
+  for line in output.splitlines():
+    fields = line.split(":")
+    if len(fields) == 2:
+      fs_dict[fields[0].strip()] = fields[1].strip()
+  return fs_dict
 
 
 def UnsparseImage(sparse_image_path, replace=True):
@@ -323,81 +111,75 @@
     if replace:
       os.unlink(unsparse_image_path)
     else:
-      return True, unsparse_image_path
+      return unsparse_image_path
   inflate_command = ["simg2img", sparse_image_path, unsparse_image_path]
-  (inflate_output, exit_code) = RunCommand(inflate_command)
-  if exit_code != 0:
-    print("Error: '%s' failed with exit code %d:\n%s" % (
-        inflate_command, exit_code, inflate_output))
+  try:
+    common.RunAndCheckOutput(inflate_command)
+  except:
     os.remove(unsparse_image_path)
-    return False, None
-  return True, unsparse_image_path
-
-
-def MakeVerityEnabledImage(out_file, fec_supported, prop_dict):
-  """Creates an image that is verifiable using dm-verity.
-
-  Args:
-    out_file: the location to write the verifiable image at
-    prop_dict: a dictionary of properties required for image creation and
-               verification
-  Returns:
-    True on success, False otherwise.
-  """
-  # get properties
-  image_size = int(prop_dict["partition_size"])
-  block_dev = prop_dict["verity_block_device"]
-  signer_key = prop_dict["verity_key"] + ".pk8"
-  if OPTIONS.verity_signer_path is not None:
-    signer_path = OPTIONS.verity_signer_path
-  else:
-    signer_path = prop_dict["verity_signer_cmd"]
-  signer_args = OPTIONS.verity_signer_args
-
-  # make a tempdir
-  tempdir_name = common.MakeTempDir(suffix="_verity_images")
-
-  # get partial image paths
-  verity_image_path = os.path.join(tempdir_name, "verity.img")
-  verity_metadata_path = os.path.join(tempdir_name, "verity_metadata.img")
-  verity_fec_path = os.path.join(tempdir_name, "verity_fec.img")
-
-  # build the verity tree and get the root hash and salt
-  if not BuildVerityTree(out_file, verity_image_path, prop_dict):
-    return False
-
-  # build the metadata blocks
-  root_hash = prop_dict["verity_root_hash"]
-  salt = prop_dict["verity_salt"]
-  verity_disable = "verity_disable" in prop_dict
-  if not BuildVerityMetadata(image_size, verity_metadata_path, root_hash, salt,
-                             block_dev, signer_path, signer_key, signer_args,
-                             verity_disable):
-    return False
-
-  # build the full verified image
-  target_size = int(prop_dict["original_partition_size"])
-  verity_size = int(prop_dict["verity_size"])
-
-  padding_size = target_size - image_size - verity_size
-  assert padding_size >= 0
-
-  if not BuildVerifiedImage(out_file,
-                            verity_image_path,
-                            verity_metadata_path,
-                            verity_fec_path,
-                            padding_size,
-                            fec_supported):
-    return False
-
-  return True
+    raise
+  return unsparse_image_path
 
 
 def ConvertBlockMapToBaseFs(block_map_file):
   base_fs_file = common.MakeTempFile(prefix="script_gen_", suffix=".base_fs")
   convert_command = ["blk_alloc_to_base_fs", block_map_file, base_fs_file]
-  (_, exit_code) = RunCommand(convert_command)
-  return base_fs_file if exit_code == 0 else None
+  common.RunAndCheckOutput(convert_command)
+  return base_fs_file
+
+
+def SetUpInDirAndFsConfig(origin_in, prop_dict):
+  """Returns the in_dir and fs_config that should be used for image building.
+
+  When building system.img for all targets, it creates and returns a staged dir
+  that combines the contents of /system (i.e. in the given in_dir) and root.
+
+  Args:
+    origin_in: Path to the input directory.
+    prop_dict: A property dict that contains info like partition size. Values
+        may be updated.
+
+  Returns:
+    A tuple of in_dir and fs_config that should be used to build the image.
+  """
+  fs_config = prop_dict.get("fs_config")
+
+  if prop_dict["mount_point"] == "system_other":
+    prop_dict["mount_point"] = "system"
+    return origin_in, fs_config
+
+  if prop_dict["mount_point"] != "system":
+    return origin_in, fs_config
+
+  if "first_pass" in prop_dict:
+    prop_dict["mount_point"] = "/"
+    return prop_dict["first_pass"]
+
+  # Construct a staging directory of the root file system.
+  in_dir = common.MakeTempDir()
+  root_dir = prop_dict.get("root_dir")
+  if root_dir:
+    shutil.rmtree(in_dir)
+    shutil.copytree(root_dir, in_dir, symlinks=True)
+  in_dir_system = os.path.join(in_dir, "system")
+  shutil.rmtree(in_dir_system, ignore_errors=True)
+  shutil.copytree(origin_in, in_dir_system, symlinks=True)
+
+  # Change the mount point to "/".
+  prop_dict["mount_point"] = "/"
+  if fs_config:
+    # We need to merge the fs_config files of system and root.
+    merged_fs_config = common.MakeTempFile(
+        prefix="merged_fs_config", suffix=".txt")
+    with open(merged_fs_config, "w") as fw:
+      if "root_fs_config" in prop_dict:
+        with open(prop_dict["root_fs_config"]) as fr:
+          fw.writelines(fr.readlines())
+      with open(fs_config) as fr:
+        fw.writelines(fr.readlines())
+    fs_config = merged_fs_config
+  prop_dict["first_pass"] = (in_dir, fs_config)
+  return in_dir, fs_config
 
 
 def CheckHeadroom(ext4fs_output, prop_dict):
@@ -412,11 +194,9 @@
     ext4fs_output: The output string from mke2fs command.
     prop_dict: The property dict.
 
-  Returns:
-    The check result.
-
   Raises:
     AssertionError: On invalid input.
+    BuildImageError: On check failure.
   """
   assert ext4fs_output is not None
   assert prop_dict.get('fs_type', '').startswith('ext4')
@@ -430,95 +210,38 @@
   m = ext4fs_stats.match(last_line)
   used_blocks = int(m.groupdict().get('used_blocks'))
   total_blocks = int(m.groupdict().get('total_blocks'))
-  headroom_blocks = int(prop_dict['partition_headroom']) / BLOCK_SIZE
+  headroom_blocks = int(prop_dict['partition_headroom']) // BLOCK_SIZE
   adjusted_blocks = total_blocks - headroom_blocks
   if used_blocks > adjusted_blocks:
     mount_point = prop_dict["mount_point"]
-    print("Error: Not enough room on %s (total: %d blocks, used: %d blocks, "
-          "headroom: %d blocks, available: %d blocks)" % (
-              mount_point, total_blocks, used_blocks, headroom_blocks,
-              adjusted_blocks))
-    return False
-  return True
+    raise BuildImageError(
+        "Error: Not enough room on {} (total: {} blocks, used: {} blocks, "
+        "headroom: {} blocks, available: {} blocks)".format(
+            mount_point, total_blocks, used_blocks, headroom_blocks,
+            adjusted_blocks))
 
 
-def BuildImage(in_dir, prop_dict, out_file, target_out=None):
-  """Build an image to out_file from in_dir with property prop_dict.
+def BuildImageMkfs(in_dir, prop_dict, out_file, target_out, fs_config):
+  """Builds a pure image for the files under in_dir and writes it to out_file.
 
   Args:
-    in_dir: path of input directory.
-    prop_dict: property dictionary.
-    out_file: path of the output image file.
-    target_out: path of the product out directory to read device specific FS
-        config files.
+    in_dir: Path to input directory.
+    prop_dict: A property dict that contains info like partition size. Values
+        will be updated with computed values.
+    out_file: The output image file.
+    target_out: Path to the TARGET_OUT directory as in Makefile. It actually
+        points to the /system directory under PRODUCT_OUT. fs_config (the one
+        under system/core/libcutils) reads device specific FS config files from
+        there.
+    fs_config: The fs_config file that drives the prototype
 
-  Returns:
-    True iff the image is built successfully.
+  Raises:
+    BuildImageError: On build image failures.
   """
-  # system_root_image=true: build a system.img that combines the contents of
-  # /system and the ramdisk, and can be mounted at the root of the file system.
-  origin_in = in_dir
-  fs_config = prop_dict.get("fs_config")
-  if (prop_dict.get("system_root_image") == "true" and
-      prop_dict["mount_point"] == "system"):
-    in_dir = common.MakeTempDir()
-    # Change the mount point to "/".
-    prop_dict["mount_point"] = "/"
-    if fs_config:
-      # We need to merge the fs_config files of system and ramdisk.
-      merged_fs_config = common.MakeTempFile(prefix="root_fs_config",
-                                             suffix=".txt")
-      with open(merged_fs_config, "w") as fw:
-        if "ramdisk_fs_config" in prop_dict:
-          with open(prop_dict["ramdisk_fs_config"]) as fr:
-            fw.writelines(fr.readlines())
-        with open(fs_config) as fr:
-          fw.writelines(fr.readlines())
-      fs_config = merged_fs_config
-
   build_command = []
   fs_type = prop_dict.get("fs_type", "")
   run_e2fsck = False
 
-  fs_spans_partition = True
-  if fs_type.startswith("squash"):
-    fs_spans_partition = False
-
-  is_verity_partition = "verity_block_device" in prop_dict
-  verity_supported = prop_dict.get("verity") == "true"
-  verity_fec_supported = prop_dict.get("verity_fec") == "true"
-
-  # Adjust the partition size to make room for the hashes if this is to be
-  # verified.
-  if verity_supported and is_verity_partition:
-    partition_size = int(prop_dict.get("partition_size"))
-    (adjusted_size, verity_size) = AdjustPartitionSizeForVerity(
-        partition_size, verity_fec_supported)
-    if not adjusted_size:
-      return False
-    prop_dict["partition_size"] = str(adjusted_size)
-    prop_dict["original_partition_size"] = str(partition_size)
-    prop_dict["verity_size"] = str(verity_size)
-
-  # Adjust partition size for AVB hash footer or AVB hashtree footer.
-  avb_footer_type = ''
-  if prop_dict.get("avb_hash_enable") == "true":
-    avb_footer_type = 'hash'
-  elif prop_dict.get("avb_hashtree_enable") == "true":
-    avb_footer_type = 'hashtree'
-
-  if avb_footer_type:
-    avbtool = prop_dict["avb_avbtool"]
-    partition_size = prop_dict["partition_size"]
-    # avb_add_hash_footer_args or avb_add_hashtree_footer_args.
-    additional_args = prop_dict["avb_add_" + avb_footer_type + "_footer_args"]
-    max_image_size = AVBCalcMaxImageSize(avbtool, avb_footer_type,
-                                         partition_size, additional_args)
-    if max_image_size == 0:
-      return False
-    prop_dict["partition_size"] = str(max_image_size)
-    prop_dict["original_partition_size"] = partition_size
-
   if fs_type.startswith("ext"):
     build_command = [prop_dict["ext_mkuserimg"]]
     if "extfs_sparse_flag" in prop_dict:
@@ -526,7 +249,7 @@
       run_e2fsck = True
     build_command.extend([in_dir, out_file, fs_type,
                           prop_dict["mount_point"]])
-    build_command.append(prop_dict["partition_size"])
+    build_command.append(prop_dict["image_size"])
     if "journal_size" in prop_dict:
       build_command.extend(["-j", prop_dict["journal_size"]])
     if "timestamp" in prop_dict:
@@ -539,8 +262,6 @@
       build_command.extend(["-B", prop_dict["block_list"]])
     if "base_fs_file" in prop_dict:
       base_fs_file = ConvertBlockMapToBaseFs(prop_dict["base_fs_file"])
-      if base_fs_file is None:
-        return False
       build_command.extend(["-d", base_fs_file])
     build_command.extend(["-L", prop_dict["mount_point"]])
     if "extfs_inode_count" in prop_dict:
@@ -552,7 +273,7 @@
     if "flash_logical_block_size" in prop_dict:
       build_command.extend(["-o", prop_dict["flash_logical_block_size"]])
     # Specify UUID and hash_seed if using mke2fs.
-    if prop_dict["ext_mkuserimg"] == "mkuserimg_mke2fs.sh":
+    if prop_dict["ext_mkuserimg"] == "mkuserimg_mke2fs":
       if "uuid" in prop_dict:
         build_command.extend(["-U", prop_dict["uuid"]])
       if "hash_seed" in prop_dict:
@@ -585,7 +306,7 @@
       build_command.extend(["-a"])
   elif fs_type.startswith("f2fs"):
     build_command = ["mkf2fsuserimg.sh"]
-    build_command.extend([out_file, prop_dict["partition_size"]])
+    build_command.extend([out_file, prop_dict["image_size"]])
     if fs_config:
       build_command.extend(["-C", fs_config])
     build_command.extend(["-f", in_dir])
@@ -598,79 +319,153 @@
       build_command.extend(["-T", str(prop_dict["timestamp"])])
     build_command.extend(["-L", prop_dict["mount_point"]])
   else:
-    print("Error: unknown filesystem type '%s'" % (fs_type))
-    return False
+    raise BuildImageError(
+        "Error: unknown filesystem type: {}".format(fs_type))
 
-  if in_dir != origin_in:
-    # Construct a staging directory of the root file system.
-    ramdisk_dir = prop_dict.get("ramdisk_dir")
-    if ramdisk_dir:
-      shutil.rmtree(in_dir)
-      shutil.copytree(ramdisk_dir, in_dir, symlinks=True)
-    staging_system = os.path.join(in_dir, "system")
-    shutil.rmtree(staging_system, ignore_errors=True)
-    shutil.copytree(origin_in, staging_system, symlinks=True)
-
-  (mkfs_output, exit_code) = RunCommand(build_command)
-  if exit_code != 0:
-    print("Error: '%s' failed with exit code %d:\n%s" % (
-        build_command, exit_code, mkfs_output))
-    return False
-
-  # Check if there's enough headroom space available for ext4 image.
-  if "partition_headroom" in prop_dict and fs_type.startswith("ext4"):
-    if not CheckHeadroom(mkfs_output, prop_dict):
-      return False
-
-  if not fs_spans_partition:
-    mount_point = prop_dict.get("mount_point")
-    partition_size = int(prop_dict.get("partition_size"))
-    image_size = GetSimgSize(out_file)
-    if image_size > partition_size:
-      print("Error: %s image size of %d is larger than partition size of "
-            "%d" % (mount_point, image_size, partition_size))
-      return False
-    if verity_supported and is_verity_partition:
-      ZeroPadSimg(out_file, partition_size - image_size)
-
-  # Create the verified image if this is to be verified.
-  if verity_supported and is_verity_partition:
-    if not MakeVerityEnabledImage(out_file, verity_fec_supported, prop_dict):
-      return False
-
-  # Add AVB HASH or HASHTREE footer (metadata).
-  if avb_footer_type:
-    avbtool = prop_dict["avb_avbtool"]
-    original_partition_size = prop_dict["original_partition_size"]
-    partition_name = prop_dict["partition_name"]
-    # key_path and algorithm are only available when chain partition is used.
-    key_path = prop_dict.get("avb_key_path")
-    algorithm = prop_dict.get("avb_algorithm")
-    salt = prop_dict.get("avb_salt")
-    # avb_add_hash_footer_args or avb_add_hashtree_footer_args
-    additional_args = prop_dict["avb_add_" + avb_footer_type + "_footer_args"]
-    if not AVBAddFooter(out_file, avbtool, avb_footer_type,
-                        original_partition_size, partition_name, key_path,
-                        algorithm, salt, additional_args):
-      return False
+  try:
+    mkfs_output = common.RunAndCheckOutput(build_command)
+  except:
+    try:
+      du = GetDiskUsage(in_dir)
+      du_str = "{} bytes ({} MB)".format(du, du // BYTES_IN_MB)
+    # Suppress any errors from GetDiskUsage() to avoid hiding the real errors
+    # from common.RunAndCheckOutput().
+    except Exception:  # pylint: disable=broad-except
+      logger.exception("Failed to compute disk usage with du")
+      du_str = "unknown"
+    print(
+        "Out of space? Out of inodes? The tree size of {} is {}, "
+        "with reserved space of {} bytes ({} MB).".format(
+            in_dir, du_str,
+            int(prop_dict.get("partition_reserved_size", 0)),
+            int(prop_dict.get("partition_reserved_size", 0)) // BYTES_IN_MB))
+    print(
+        "The max image size for filesystem files is {} bytes ({} MB), out of a "
+        "total partition size of {} bytes ({} MB).".format(
+            int(prop_dict["image_size"]),
+            int(prop_dict["image_size"]) // BYTES_IN_MB,
+            int(prop_dict["partition_size"]),
+            int(prop_dict["partition_size"]) // BYTES_IN_MB))
+    raise
 
   if run_e2fsck and prop_dict.get("skip_fsck") != "true":
-    success, unsparse_image = UnsparseImage(out_file, replace=False)
-    if not success:
-      return False
+    unsparse_image = UnsparseImage(out_file, replace=False)
 
     # Run e2fsck on the inflated image file
     e2fsck_command = ["e2fsck", "-f", "-n", unsparse_image]
-    (e2fsck_output, exit_code) = RunCommand(e2fsck_command)
+    try:
+      common.RunAndCheckOutput(e2fsck_command)
+    finally:
+      os.remove(unsparse_image)
 
-    os.remove(unsparse_image)
+  return mkfs_output
 
-    if exit_code != 0:
-      print("Error: '%s' failed with exit code %d:\n%s" % (
-          e2fsck_command, exit_code, e2fsck_output))
-      return False
 
-  return True
+def BuildImage(in_dir, prop_dict, out_file, target_out=None):
+  """Builds an image for the files under in_dir and writes it to out_file.
+
+  Args:
+    in_dir: Path to input directory.
+    prop_dict: A property dict that contains info like partition size. Values
+        will be updated with computed values.
+    out_file: The output image file.
+    target_out: Path to the TARGET_OUT directory as in Makefile. It actually
+        points to the /system directory under PRODUCT_OUT. fs_config (the one
+        under system/core/libcutils) reads device specific FS config files from
+        there.
+
+  Raises:
+    BuildImageError: On build image failures.
+  """
+  in_dir, fs_config = SetUpInDirAndFsConfig(in_dir, prop_dict)
+
+  build_command = []
+  fs_type = prop_dict.get("fs_type", "")
+
+  fs_spans_partition = True
+  if fs_type.startswith("squash"):
+    fs_spans_partition = False
+
+  # Get a builder for creating an image that's to be verified by Verified Boot,
+  # or None if not applicable.
+  verity_image_builder = verity_utils.CreateVerityImageBuilder(prop_dict)
+
+  if (prop_dict.get("use_dynamic_partition_size") == "true" and
+      "partition_size" not in prop_dict):
+    # If partition_size is not defined, use output of `du' + reserved_size.
+    size = GetDiskUsage(in_dir)
+    logger.info(
+        "The tree size of %s is %d MB.", in_dir, size // BYTES_IN_MB)
+    # If not specified, give us 16MB margin for GetDiskUsage error ...
+    reserved_size = int(prop_dict.get("partition_reserved_size", BYTES_IN_MB * 16))
+    partition_headroom = int(prop_dict.get("partition_headroom", 0))
+    if fs_type.startswith("ext4") and partition_headroom > reserved_size:
+      reserved_size = partition_headroom
+    size += reserved_size
+    # Round this up to a multiple of 4K so that avbtool works
+    size = common.RoundUpTo4K(size)
+    if fs_type.startswith("ext"):
+      prop_dict["partition_size"] = str(size)
+      prop_dict["image_size"] = str(size)
+      if "extfs_inode_count" not in prop_dict:
+        prop_dict["extfs_inode_count"] = str(GetInodeUsage(in_dir))
+      logger.info(
+          "First Pass based on estimates of %d MB and %s inodes.",
+          size // BYTES_IN_MB, prop_dict["extfs_inode_count"])
+      BuildImageMkfs(in_dir, prop_dict, out_file, target_out, fs_config)
+      fs_dict = GetFilesystemCharacteristics(out_file)
+      os.remove(out_file)
+      block_size = int(fs_dict.get("Block size", "4096"))
+      free_size = int(fs_dict.get("Free blocks", "0")) * block_size
+      reserved_size = int(prop_dict.get("partition_reserved_size", 0))
+      partition_headroom = int(fs_dict.get("partition_headroom", 0))
+      if fs_type.startswith("ext4") and partition_headroom > reserved_size:
+        reserved_size = partition_headroom
+      if free_size <= reserved_size:
+        logger.info(
+            "Not worth reducing image %d <= %d.", free_size, reserved_size)
+      else:
+        size -= free_size
+        size += reserved_size
+        if block_size <= 4096:
+          size = common.RoundUpTo4K(size)
+        else:
+          size = ((size + block_size - 1) // block_size) * block_size
+        # Use a minimum size, otherwise we will fail to calculate an AVB footer
+        # or fail to construct an ext4 image.
+        size = max(size, 256 * 1024)
+      extfs_inode_count = prop_dict["extfs_inode_count"]
+      inodes = int(fs_dict.get("Inode count", extfs_inode_count))
+      inodes -= int(fs_dict.get("Free inodes", "0"))
+      prop_dict["extfs_inode_count"] = str(inodes)
+      prop_dict["partition_size"] = str(size)
+      logger.info(
+          "Allocating %d Inodes for %s.", inodes, out_file)
+    if verity_image_builder:
+      size = verity_image_builder.CalculateDynamicPartitionSize(size)
+    prop_dict["partition_size"] = str(size)
+    logger.info(
+        "Allocating %d MB for %s.", size // BYTES_IN_MB, out_file)
+
+  prop_dict["image_size"] = prop_dict["partition_size"]
+
+  # Adjust the image size to make room for the hashes if this is to be verified.
+  if verity_image_builder:
+    max_image_size = verity_image_builder.CalculateMaxImageSize()
+    prop_dict["image_size"] = str(max_image_size)
+
+  mkfs_output = BuildImageMkfs(in_dir, prop_dict, out_file, target_out, fs_config)
+
+  # Check if there's enough headroom space available for ext4 image.
+  if "partition_headroom" in prop_dict and fs_type.startswith("ext4"):
+    CheckHeadroom(mkfs_output, prop_dict)
+
+  if not fs_spans_partition and verity_image_builder:
+    verity_image_builder.PadSparseImage(out_file)
+
+  # Create the verified image if this is to be verified.
+  if verity_image_builder:
+    verity_image_builder.Build(out_file)
 
 
 def ImagePropFromGlobalDict(glob_dict, mount_point):
@@ -715,6 +510,7 @@
       "avb_enable",
       "avb_avbtool",
       "avb_salt",
+      "use_dynamic_partition_size",
   )
   for p in common_props:
     copy_prop(p, p)
@@ -736,8 +532,8 @@
       d["journal_size"] = "0"
     copy_prop("system_verity_block_device", "verity_block_device")
     copy_prop("system_root_image", "system_root_image")
-    copy_prop("ramdisk_dir", "ramdisk_dir")
-    copy_prop("ramdisk_fs_config", "ramdisk_fs_config")
+    copy_prop("root_dir", "root_dir")
+    copy_prop("root_fs_config", "root_fs_config")
     copy_prop("ext4_share_dup_blocks", "ext4_share_dup_blocks")
     copy_prop("system_squashfs_compressor", "squashfs_compressor")
     copy_prop("system_squashfs_compressor_opt", "squashfs_compressor_opt")
@@ -747,10 +543,10 @@
     copy_prop("system_extfs_inode_count", "extfs_inode_count")
     if not copy_prop("system_extfs_rsv_pct", "extfs_rsv_pct"):
       d["extfs_rsv_pct"] = "0"
+    copy_prop("system_reserved_size", "partition_reserved_size")
   elif mount_point == "system_other":
     # We inherit the selinux policies of /system since we contain some of its
     # files.
-    d["mount_point"] = "system"
     copy_prop("avb_system_hashtree_enable", "avb_hashtree_enable")
     copy_prop("avb_system_add_hashtree_footer_args",
               "avb_add_hashtree_footer_args")
@@ -762,6 +558,7 @@
     if not copy_prop("system_journal_size", "journal_size"):
       d["journal_size"] = "0"
     copy_prop("system_verity_block_device", "verity_block_device")
+    copy_prop("ext4_share_dup_blocks", "ext4_share_dup_blocks")
     copy_prop("system_squashfs_compressor", "squashfs_compressor")
     copy_prop("system_squashfs_compressor_opt", "squashfs_compressor_opt")
     copy_prop("system_squashfs_block_size", "squashfs_block_size")
@@ -769,6 +566,7 @@
     copy_prop("system_extfs_inode_count", "extfs_inode_count")
     if not copy_prop("system_extfs_rsv_pct", "extfs_rsv_pct"):
       d["extfs_rsv_pct"] = "0"
+    copy_prop("system_reserved_size", "partition_reserved_size")
   elif mount_point == "data":
     # Copy the generic fs type first, override with specific one if available.
     copy_prop("fs_type", "fs_type")
@@ -799,6 +597,7 @@
     copy_prop("vendor_extfs_inode_count", "extfs_inode_count")
     if not copy_prop("vendor_extfs_rsv_pct", "extfs_rsv_pct"):
       d["extfs_rsv_pct"] = "0"
+    copy_prop("vendor_reserved_size", "partition_reserved_size")
   elif mount_point == "product":
     copy_prop("avb_product_hashtree_enable", "avb_hashtree_enable")
     copy_prop("avb_product_add_hashtree_footer_args",
@@ -810,6 +609,7 @@
     if not copy_prop("product_journal_size", "journal_size"):
       d["journal_size"] = "0"
     copy_prop("product_verity_block_device", "verity_block_device")
+    copy_prop("ext4_share_dup_blocks", "ext4_share_dup_blocks")
     copy_prop("product_squashfs_compressor", "squashfs_compressor")
     copy_prop("product_squashfs_compressor_opt", "squashfs_compressor_opt")
     copy_prop("product_squashfs_block_size", "squashfs_block_size")
@@ -818,12 +618,58 @@
     copy_prop("product_extfs_inode_count", "extfs_inode_count")
     if not copy_prop("product_extfs_rsv_pct", "extfs_rsv_pct"):
       d["extfs_rsv_pct"] = "0"
+    copy_prop("product_reserved_size", "partition_reserved_size")
+  elif mount_point == "product_services":
+    copy_prop("avb_product_services_hashtree_enable", "avb_hashtree_enable")
+    copy_prop("avb_product_services_add_hashtree_footer_args",
+              "avb_add_hashtree_footer_args")
+    copy_prop("avb_product_services_key_path", "avb_key_path")
+    copy_prop("avb_product_services_algorithm", "avb_algorithm")
+    copy_prop("product_services_fs_type", "fs_type")
+    copy_prop("product_services_size", "partition_size")
+    if not copy_prop("product_services_journal_size", "journal_size"):
+      d["journal_size"] = "0"
+    copy_prop("product_services_verity_block_device", "verity_block_device")
+    copy_prop("ext4_share_dup_blocks", "ext4_share_dup_blocks")
+    copy_prop("product_services_squashfs_compressor", "squashfs_compressor")
+    copy_prop("product_services_squashfs_compressor_opt",
+              "squashfs_compressor_opt")
+    copy_prop("product_services_squashfs_block_size", "squashfs_block_size")
+    copy_prop("product_services_squashfs_disable_4k_align",
+              "squashfs_disable_4k_align")
+    copy_prop("product_services_base_fs_file", "base_fs_file")
+    copy_prop("product_services_extfs_inode_count", "extfs_inode_count")
+    if not copy_prop("product_services_extfs_rsv_pct", "extfs_rsv_pct"):
+      d["extfs_rsv_pct"] = "0"
+    copy_prop("product_services_reserved_size", "partition_reserved_size")
+  elif mount_point == "odm":
+    copy_prop("avb_odm_hashtree_enable", "avb_hashtree_enable")
+    copy_prop("avb_odm_add_hashtree_footer_args",
+              "avb_add_hashtree_footer_args")
+    copy_prop("avb_odm_key_path", "avb_key_path")
+    copy_prop("avb_odm_algorithm", "avb_algorithm")
+    copy_prop("odm_fs_type", "fs_type")
+    copy_prop("odm_size", "partition_size")
+    if not copy_prop("odm_journal_size", "journal_size"):
+      d["journal_size"] = "0"
+    copy_prop("odm_verity_block_device", "verity_block_device")
+    copy_prop("ext4_share_dup_blocks", "ext4_share_dup_blocks")
+    copy_prop("odm_squashfs_compressor", "squashfs_compressor")
+    copy_prop("odm_squashfs_compressor_opt", "squashfs_compressor_opt")
+    copy_prop("odm_squashfs_block_size", "squashfs_block_size")
+    copy_prop("odm_squashfs_disable_4k_align", "squashfs_disable_4k_align")
+    copy_prop("odm_base_fs_file", "base_fs_file")
+    copy_prop("odm_extfs_inode_count", "extfs_inode_count")
+    if not copy_prop("odm_extfs_rsv_pct", "extfs_rsv_pct"):
+      d["extfs_rsv_pct"] = "0"
+    copy_prop("odm_reserved_size", "partition_reserved_size")
   elif mount_point == "oem":
     copy_prop("fs_type", "fs_type")
     copy_prop("oem_size", "partition_size")
     if not copy_prop("oem_journal_size", "journal_size"):
       d["journal_size"] = "0"
     copy_prop("oem_extfs_inode_count", "extfs_inode_count")
+    copy_prop("ext4_share_dup_blocks", "ext4_share_dup_blocks")
     if not copy_prop("oem_extfs_rsv_pct", "extfs_rsv_pct"):
       d["extfs_rsv_pct"] = "0"
   d["partition_name"] = mount_point
@@ -844,19 +690,50 @@
   return d
 
 
+def GlobalDictFromImageProp(image_prop, mount_point):
+  d = {}
+  def copy_prop(src_p, dest_p):
+    if src_p in image_prop:
+      d[dest_p] = image_prop[src_p]
+      return True
+    return False
+
+  if mount_point == "system":
+    copy_prop("partition_size", "system_size")
+  elif mount_point == "system_other":
+    copy_prop("partition_size", "system_size")
+  elif mount_point == "vendor":
+    copy_prop("partition_size", "vendor_size")
+  elif mount_point == "odm":
+    copy_prop("partition_size", "odm_size")
+  elif mount_point == "product":
+    copy_prop("partition_size", "product_size")
+  elif mount_point == "product_services":
+    copy_prop("partition_size", "product_services_size")
+  return d
+
+
+def SaveGlobalDict(filename, glob_dict):
+  with open(filename, "w") as f:
+    f.writelines(["%s=%s" % (key, value) for (key, value) in glob_dict.items()])
+
+
 def main(argv):
-  if len(argv) != 4:
+  if len(argv) < 4 or len(argv) > 5:
     print(__doc__)
     sys.exit(1)
 
+  common.InitLogging()
+
   in_dir = argv[0]
   glob_dict_file = argv[1]
   out_file = argv[2]
   target_out = argv[3]
+  prop_file_out = argv[4] if len(argv) >= 5 else None
 
   glob_dict = LoadGlobalDict(glob_dict_file)
   if "mount_point" in glob_dict:
-    # The caller knows the mount point and provides a dictionay needed by
+    # The caller knows the mount point and provides a dictionary needed by
     # BuildImage().
     image_properties = glob_dict
   else:
@@ -872,20 +749,29 @@
       mount_point = "cache"
     elif image_filename == "vendor.img":
       mount_point = "vendor"
+    elif image_filename == "odm.img":
+      mount_point = "odm"
     elif image_filename == "oem.img":
       mount_point = "oem"
     elif image_filename == "product.img":
       mount_point = "product"
+    elif image_filename == "product_services.img":
+      mount_point = "product_services"
     else:
-      print("error: unknown image file name ", image_filename, file=sys.stderr)
+      logger.error("Unknown image file name %s", image_filename)
       sys.exit(1)
 
     image_properties = ImagePropFromGlobalDict(glob_dict, mount_point)
 
-  if not BuildImage(in_dir, image_properties, out_file, target_out):
-    print("error: failed to build %s from %s" % (out_file, in_dir),
-          file=sys.stderr)
-    sys.exit(1)
+  try:
+    BuildImage(in_dir, image_properties, out_file, target_out)
+  except:
+    logger.error("Failed to build %s from %s", out_file, in_dir)
+    raise
+
+  if prop_file_out:
+    glob_dict_out = GlobalDictFromImageProp(image_properties, mount_point)
+    SaveGlobalDict(prop_file_out, glob_dict_out)
 
 
 if __name__ == '__main__':
diff --git a/tools/releasetools/build_super_image.py b/tools/releasetools/build_super_image.py
new file mode 100755
index 0000000..e8730ae
--- /dev/null
+++ b/tools/releasetools/build_super_image.py
@@ -0,0 +1,213 @@
+#!/usr/bin/env python
+#
+# Copyright (C) 2018 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+"""
+Usage: build_super_image input_file output_dir_or_file
+
+input_file: one of the following:
+  - directory containing extracted target files. It will load info from
+    META/misc_info.txt and build full super image / split images using source
+    images from IMAGES/.
+  - target files package. Same as above, but extracts the archive before
+    building super image.
+  - a dictionary file containing input arguments to build. Check
+    `dump_dynamic_partitions_info' for details.
+    In addition:
+    - "ab_update" needs to be true for A/B devices.
+    - If source images should be included in the output image (for super.img
+      and super split images), a list of "*_image" should be paths of each
+      source images.
+
+output_dir_or_file:
+    If a single super image is built (for super_empty.img, or super.img for
+    launch devices), this argument is the output file.
+    If a collection of split images are built (for retrofit devices), this
+    argument is the output directory.
+"""
+
+from __future__ import print_function
+
+import logging
+import os.path
+import shlex
+import sys
+import zipfile
+
+import common
+import sparse_img
+
+if sys.hexversion < 0x02070000:
+  print("Python 2.7 or newer is required.", file=sys.stderr)
+  sys.exit(1)
+
+logger = logging.getLogger(__name__)
+
+
+UNZIP_PATTERN = ["IMAGES/*", "META/*"]
+
+
+def GetPartitionSizeFromImage(img):
+  try:
+    simg = sparse_img.SparseImage(img)
+    return simg.blocksize * simg.total_blocks
+  except ValueError:
+    return os.path.getsize(img)
+
+
+def BuildSuperImageFromDict(info_dict, output):
+
+  cmd = [info_dict["lpmake"],
+         "--metadata-size", "65536",
+         "--super-name", info_dict["super_metadata_device"]]
+
+  ab_update = info_dict.get("ab_update") == "true"
+  retrofit = info_dict.get("dynamic_partition_retrofit") == "true"
+  block_devices = shlex.split(info_dict.get("super_block_devices", "").strip())
+  groups = shlex.split(info_dict.get("super_partition_groups", "").strip())
+
+  if ab_update:
+    cmd += ["--metadata-slots", "2"]
+  else:
+    cmd += ["--metadata-slots", "1"]
+
+  if ab_update and retrofit:
+    cmd.append("--auto-slot-suffixing")
+
+  for device in block_devices:
+    size = info_dict["super_{}_device_size".format(device)]
+    cmd += ["--device", "{}:{}".format(device, size)]
+
+  append_suffix = ab_update and not retrofit
+  has_image = False
+  for group in groups:
+    group_size = info_dict["super_{}_group_size".format(group)]
+    if append_suffix:
+      cmd += ["--group", "{}_a:{}".format(group, group_size),
+              "--group", "{}_b:{}".format(group, group_size)]
+    else:
+      cmd += ["--group", "{}:{}".format(group, group_size)]
+
+    partition_list = shlex.split(
+        info_dict["super_{}_partition_list".format(group)].strip())
+
+    for partition in partition_list:
+      image = info_dict.get("{}_image".format(partition))
+      image_size = 0
+      if image:
+        image_size = GetPartitionSizeFromImage(image)
+        has_image = True
+      if append_suffix:
+        cmd += ["--partition",
+                "{}_a:readonly:{}:{}_a".format(partition, image_size, group),
+                "--partition",
+                "{}_b:readonly:0:{}_b".format(partition, group)]
+        if image:
+          # For A/B devices, super partition always contains sub-partitions in
+          # the _a slot, because this image should only be used for
+          # bootstrapping / initializing the device. When flashing the image,
+          # bootloader fastboot should always mark _a slot as bootable.
+          cmd += ["--image", "{}_a={}".format(partition, image)]
+      else:
+        cmd += ["--partition",
+                "{}:readonly:{}:{}".format(partition, image_size, group)]
+        if image:
+          cmd += ["--image", "{}={}".format(partition, image)]
+
+  if has_image:
+    cmd.append("--sparse")
+
+  cmd += ["--output", output]
+
+  common.RunAndCheckOutput(cmd)
+
+  if retrofit and has_image:
+    logger.info("Done writing images to directory %s", output)
+  else:
+    logger.info("Done writing image %s", output)
+
+  return True
+
+
+def BuildSuperImageFromExtractedTargetFiles(inp, out):
+  info_dict = common.LoadInfoDict(inp)
+  partition_list = shlex.split(
+      info_dict.get("dynamic_partition_list", "").strip())
+  missing_images = []
+  for partition in partition_list:
+    image_path = os.path.join(inp, "IMAGES", "{}.img".format(partition))
+    if not os.path.isfile(image_path):
+      missing_images.append(image_path)
+    else:
+      info_dict["{}_image".format(partition)] = image_path
+  if missing_images:
+    logger.warning("Skip building super image because the following "
+                   "images are missing from target files:\n%s",
+                   "\n".join(missing_images))
+    return False
+  return BuildSuperImageFromDict(info_dict, out)
+
+
+def BuildSuperImageFromTargetFiles(inp, out):
+  input_tmp = common.UnzipTemp(inp, UNZIP_PATTERN)
+  return BuildSuperImageFromExtractedTargetFiles(input_tmp, out)
+
+
+def BuildSuperImage(inp, out):
+
+  if isinstance(inp, dict):
+    logger.info("Building super image from info dict...")
+    return BuildSuperImageFromDict(inp, out)
+
+  if isinstance(inp, str):
+    if os.path.isdir(inp):
+      logger.info("Building super image from extracted target files...")
+      return BuildSuperImageFromExtractedTargetFiles(inp, out)
+
+    if zipfile.is_zipfile(inp):
+      logger.info("Building super image from target files...")
+      return BuildSuperImageFromTargetFiles(inp, out)
+
+    if os.path.isfile(inp):
+      with open(inp) as f:
+        lines = f.read()
+      logger.info("Building super image from info dict...")
+      return BuildSuperImageFromDict(common.LoadDictionaryFromLines(lines.split("\n")), out)
+
+  raise ValueError("{} is not a dictionary or a valid path".format(inp))
+
+
+def main(argv):
+
+  args = common.ParseOptions(argv, __doc__)
+
+  if len(args) != 2:
+    common.Usage(__doc__)
+    sys.exit(1)
+
+  common.InitLogging()
+
+  BuildSuperImage(args[0], args[1])
+
+
+if __name__ == "__main__":
+  try:
+    common.CloseInheritedPipes()
+    main(sys.argv[1:])
+  except common.ExternalError:
+    logger.exception("\n   ERROR:\n")
+    sys.exit(1)
+  finally:
+    common.Cleanup()
diff --git a/tools/releasetools/check_ota_package_signature.py b/tools/releasetools/check_ota_package_signature.py
index 3cac90a..7d3424b 100755
--- a/tools/releasetools/check_ota_package_signature.py
+++ b/tools/releasetools/check_ota_package_signature.py
@@ -21,17 +21,18 @@
 from __future__ import print_function
 
 import argparse
+import logging
 import re
 import subprocess
 import sys
-import tempfile
 import zipfile
-
 from hashlib import sha1
 from hashlib import sha256
 
 import common
 
+logger = logging.getLogger(__name__)
+
 
 def CertUsesSha256(cert):
   """Check if the cert uses SHA-256 hashing algorithm."""
@@ -165,11 +166,11 @@
   cmd = ['delta_generator',
          '--in_file=' + payload_file,
          '--public_key=' + pubkey]
-  proc = common.Run(cmd, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
+  proc = common.Run(cmd)
   stdoutdata, _ = proc.communicate()
   assert proc.returncode == 0, \
-      'Failed to verify payload with delta_generator: %s\n%s' % (package,
-                                                                 stdoutdata)
+      'Failed to verify payload with delta_generator: {}\n{}'.format(
+          package, stdoutdata)
   common.ZipClose(package_zip)
 
   # Verified successfully upon reaching here.
@@ -182,6 +183,8 @@
   parser.add_argument('package', help='The OTA package to be verified.')
   args = parser.parse_args()
 
+  common.InitLogging()
+
   VerifyPackage(args.certificate, args.package)
   VerifyAbOtaPayload(args.certificate, args.package)
 
diff --git a/tools/releasetools/common.py b/tools/releasetools/common.py
index 6defb2b..4c452ad 100644
--- a/tools/releasetools/common.py
+++ b/tools/releasetools/common.py
@@ -20,6 +20,9 @@
 import getpass
 import gzip
 import imp
+import json
+import logging
+import logging.config
 import os
 import platform
 import re
@@ -37,6 +40,9 @@
 import blockimgdiff
 import sparse_img
 
+logger = logging.getLogger(__name__)
+
+
 class Options(object):
   def __init__(self):
     platform_search_path = {
@@ -44,7 +50,7 @@
         "darwin": "out/host/darwin-x86",
     }
 
-    self.search_path = platform_search_path.get(sys.platform, None)
+    self.search_path = platform_search_path.get(sys.platform)
     self.signapk_path = "framework/signapk.jar"  # Relative to search_path
     self.signapk_shared_library_path = "lib64"   # Relative to search_path
     self.extra_signapk_args = []
@@ -72,13 +78,19 @@
 
 OPTIONS = Options()
 
+# The block size that's used across the releasetools scripts.
+BLOCK_SIZE = 4096
 
 # Values for "certificate" in apkcerts that mean special things.
 SPECIAL_CERT_STRINGS = ("PRESIGNED", "EXTERNAL")
 
-
 # The partitions allowed to be signed by AVB (Android verified boot 2.0).
-AVB_PARTITIONS = ('boot', 'recovery', 'system', 'vendor', 'product', 'dtbo')
+AVB_PARTITIONS = ('boot', 'recovery', 'system', 'vendor', 'product',
+                  'product_services', 'dtbo', 'odm')
+
+# Partitions that should have their care_map added to META/care_map.pb
+PARTITIONS_WITH_CARE_MAP = ('system', 'vendor', 'product', 'product_services',
+                            'odm')
 
 
 class ErrorCode(object):
@@ -109,23 +121,103 @@
   TUNE_PARTITION_FAILURE = 3007
   APPLY_PATCH_FAILURE = 3008
 
+
 class ExternalError(RuntimeError):
   pass
 
 
-def Run(args, verbose=None, **kwargs):
-  """Create and return a subprocess.Popen object.
+def InitLogging():
+  DEFAULT_LOGGING_CONFIG = {
+      'version': 1,
+      'disable_existing_loggers': False,
+      'formatters': {
+          'standard': {
+              'format':
+                  '%(asctime)s - %(filename)s - %(levelname)-8s: %(message)s',
+              'datefmt': '%Y-%m-%d %H:%M:%S',
+          },
+      },
+      'handlers': {
+          'default': {
+              'class': 'logging.StreamHandler',
+              'formatter': 'standard',
+          },
+      },
+      'loggers': {
+          '': {
+              'handlers': ['default'],
+              'level': 'WARNING',
+              'propagate': True,
+          }
+      }
+  }
+  env_config = os.getenv('LOGGING_CONFIG')
+  if env_config:
+    with open(env_config) as f:
+      config = json.load(f)
+  else:
+    config = DEFAULT_LOGGING_CONFIG
 
-  Caller can specify if the command line should be printed. The global
-  OPTIONS.verbose will be used if not specified.
+    # Increase the logging level for verbose mode.
+    if OPTIONS.verbose:
+      config = copy.deepcopy(DEFAULT_LOGGING_CONFIG)
+      config['loggers']['']['level'] = 'INFO'
+
+  logging.config.dictConfig(config)
+
+
+def Run(args, verbose=None, **kwargs):
+  """Creates and returns a subprocess.Popen object.
+
+  Args:
+    args: The command represented as a list of strings.
+    verbose: Whether the commands should be shown. Default to the global
+        verbosity if unspecified.
+    kwargs: Any additional args to be passed to subprocess.Popen(), such as env,
+        stdin, etc. stdout and stderr will default to subprocess.PIPE and
+        subprocess.STDOUT respectively unless caller specifies any of them.
+
+  Returns:
+    A subprocess.Popen object.
   """
-  if verbose is None:
-    verbose = OPTIONS.verbose
-  if verbose:
-    print("  running: ", " ".join(args))
+  if 'stdout' not in kwargs and 'stderr' not in kwargs:
+    kwargs['stdout'] = subprocess.PIPE
+    kwargs['stderr'] = subprocess.STDOUT
+  # Don't log any if caller explicitly says so.
+  if verbose != False:
+    logger.info("  Running: \"%s\"", " ".join(args))
   return subprocess.Popen(args, **kwargs)
 
 
+def RunAndCheckOutput(args, verbose=None, **kwargs):
+  """Runs the given command and returns the output.
+
+  Args:
+    args: The command represented as a list of strings.
+    verbose: Whether the commands should be shown. Default to the global
+        verbosity if unspecified.
+    kwargs: Any additional args to be passed to subprocess.Popen(), such as env,
+        stdin, etc. stdout and stderr will default to subprocess.PIPE and
+        subprocess.STDOUT respectively unless caller specifies any of them.
+
+  Returns:
+    The output string.
+
+  Raises:
+    ExternalError: On non-zero exit from the command.
+  """
+  proc = Run(args, verbose=verbose, **kwargs)
+  output, _ = proc.communicate()
+  # Don't log any if caller explicitly says so.
+  if verbose != False:
+    logger.info("%s", output.rstrip())
+  if proc.returncode != 0:
+    raise ExternalError(
+        "Failed to run command '{}' (exit code {}):\n{}".format(
+            args, proc.returncode, output))
+  return output
+
+
 def RoundUpTo4K(value):
   rounded_up = value + 4095
   return rounded_up - (rounded_up % 4096)
@@ -147,9 +239,41 @@
       pass
 
 
-def LoadInfoDict(input_file, input_dir=None):
-  """Read and parse the META/misc_info.txt key/value pairs from the
-  input target files and return a dict."""
+def LoadInfoDict(input_file, repacking=False):
+  """Loads the key/value pairs from the given input target_files.
+
+  It reads `META/misc_info.txt` file in the target_files input, does sanity
+  checks and returns the parsed key/value pairs for to the given build. It's
+  usually called early when working on input target_files files, e.g. when
+  generating OTAs, or signing builds. Note that the function may be called
+  against an old target_files file (i.e. from past dessert releases). So the
+  property parsing needs to be backward compatible.
+
+  In a `META/misc_info.txt`, a few properties are stored as links to the files
+  in the PRODUCT_OUT directory. It works fine with the build system. However,
+  they are no longer available when (re)generating images from target_files zip.
+  When `repacking` is True, redirect these properties to the actual files in the
+  unzipped directory.
+
+  Args:
+    input_file: The input target_files file, which could be an open
+        zipfile.ZipFile instance, or a str for the dir that contains the files
+        unzipped from a target_files file.
+    repacking: Whether it's trying repack an target_files file after loading the
+        info dict (default: False). If so, it will rewrite a few loaded
+        properties (e.g. selinux_fc, root_dir) to point to the actual files in
+        target_files file. When doing repacking, `input_file` must be a dir.
+
+  Returns:
+    A dict that contains the parsed key/value pairs.
+
+  Raises:
+    AssertionError: On invalid input arguments.
+    ValueError: On malformed input values.
+  """
+  if repacking:
+    assert isinstance(input_file, str), \
+        "input_file must be a path str when doing repacking"
 
   def read_helper(fn):
     if isinstance(input_file, zipfile.ZipFile):
@@ -166,59 +290,48 @@
   try:
     d = LoadDictionaryFromLines(read_helper("META/misc_info.txt").split("\n"))
   except KeyError:
-    raise ValueError("can't find META/misc_info.txt in input target-files")
+    raise ValueError("Failed to find META/misc_info.txt in input target-files")
 
-  assert "recovery_api_version" in d
-  assert "fstab_version" in d
+  if "recovery_api_version" not in d:
+    raise ValueError("Failed to find 'recovery_api_version'")
+  if "fstab_version" not in d:
+    raise ValueError("Failed to find 'fstab_version'")
 
-  # A few properties are stored as links to the files in the out/ directory.
-  # It works fine with the build system. However, they are no longer available
-  # when (re)generating from target_files zip. If input_dir is not None, we
-  # are doing repacking. Redirect those properties to the actual files in the
-  # unzipped directory.
-  if input_dir is not None:
-    # We carry a copy of file_contexts.bin under META/. If not available,
-    # search BOOT/RAMDISK/. Note that sometimes we may need a different file
-    # to build images than the one running on device, such as when enabling
-    # system_root_image. In that case, we must have the one for image
-    # generation copied to META/.
+  if repacking:
+    # We carry a copy of file_contexts.bin under META/. If not available, search
+    # BOOT/RAMDISK/. Note that sometimes we may need a different file to build
+    # images than the one running on device, in that case, we must have the one
+    # for image generation copied to META/.
     fc_basename = os.path.basename(d.get("selinux_fc", "file_contexts"))
-    fc_config = os.path.join(input_dir, "META", fc_basename)
-    if d.get("system_root_image") == "true":
-      assert os.path.exists(fc_config)
-    if not os.path.exists(fc_config):
-      fc_config = os.path.join(input_dir, "BOOT", "RAMDISK", fc_basename)
-      if not os.path.exists(fc_config):
-        fc_config = None
+    fc_config = os.path.join(input_file, "META", fc_basename)
+    assert os.path.exists(fc_config)
 
-    if fc_config:
-      d["selinux_fc"] = fc_config
+    d["selinux_fc"] = fc_config
 
-    # Similarly we need to redirect "ramdisk_dir" and "ramdisk_fs_config".
-    if d.get("system_root_image") == "true":
-      d["ramdisk_dir"] = os.path.join(input_dir, "ROOT")
-      d["ramdisk_fs_config"] = os.path.join(
-          input_dir, "META", "root_filesystem_config.txt")
+    # Similarly we need to redirect "root_dir", and "root_fs_config".
+    d["root_dir"] = os.path.join(input_file, "ROOT")
+    d["root_fs_config"] = os.path.join(
+        input_file, "META", "root_filesystem_config.txt")
 
     # Redirect {system,vendor}_base_fs_file.
     if "system_base_fs_file" in d:
       basename = os.path.basename(d["system_base_fs_file"])
-      system_base_fs_file = os.path.join(input_dir, "META", basename)
+      system_base_fs_file = os.path.join(input_file, "META", basename)
       if os.path.exists(system_base_fs_file):
         d["system_base_fs_file"] = system_base_fs_file
       else:
-        print("Warning: failed to find system base fs file: %s" % (
-            system_base_fs_file,))
+        logger.warning(
+            "Failed to find system base fs file: %s", system_base_fs_file)
         del d["system_base_fs_file"]
 
     if "vendor_base_fs_file" in d:
       basename = os.path.basename(d["vendor_base_fs_file"])
-      vendor_base_fs_file = os.path.join(input_dir, "META", basename)
+      vendor_base_fs_file = os.path.join(input_file, "META", basename)
       if os.path.exists(vendor_base_fs_file):
         d["vendor_base_fs_file"] = vendor_base_fs_file
       else:
-        print("Warning: failed to find vendor base fs file: %s" % (
-            vendor_base_fs_file,))
+        logger.warning(
+            "Failed to find vendor base fs file: %s", vendor_base_fs_file)
         del d["vendor_base_fs_file"]
 
   def makeint(key):
@@ -235,20 +348,44 @@
   makeint("boot_size")
   makeint("fstab_version")
 
-  system_root_image = d.get("system_root_image", None) == "true"
-  if d.get("no_recovery", None) != "true":
-    recovery_fstab_path = "RECOVERY/RAMDISK/etc/recovery.fstab"
-    d["fstab"] = LoadRecoveryFSTab(read_helper, d["fstab_version"],
-        recovery_fstab_path, system_root_image)
-  elif d.get("recovery_as_boot", None) == "true":
-    recovery_fstab_path = "BOOT/RAMDISK/etc/recovery.fstab"
-    d["fstab"] = LoadRecoveryFSTab(read_helper, d["fstab_version"],
-        recovery_fstab_path, system_root_image)
+  # We changed recovery.fstab path in Q, from ../RAMDISK/etc/recovery.fstab to
+  # ../RAMDISK/system/etc/recovery.fstab. LoadInfoDict() has to handle both
+  # cases, since it may load the info_dict from an old build (e.g. when
+  # generating incremental OTAs from that build).
+  system_root_image = d.get("system_root_image") == "true"
+  if d.get("no_recovery") != "true":
+    recovery_fstab_path = "RECOVERY/RAMDISK/system/etc/recovery.fstab"
+    if isinstance(input_file, zipfile.ZipFile):
+      if recovery_fstab_path not in input_file.namelist():
+        recovery_fstab_path = "RECOVERY/RAMDISK/etc/recovery.fstab"
+    else:
+      path = os.path.join(input_file, *recovery_fstab_path.split("/"))
+      if not os.path.exists(path):
+        recovery_fstab_path = "RECOVERY/RAMDISK/etc/recovery.fstab"
+    d["fstab"] = LoadRecoveryFSTab(
+        read_helper, d["fstab_version"], recovery_fstab_path, system_root_image)
+
+  elif d.get("recovery_as_boot") == "true":
+    recovery_fstab_path = "BOOT/RAMDISK/system/etc/recovery.fstab"
+    if isinstance(input_file, zipfile.ZipFile):
+      if recovery_fstab_path not in input_file.namelist():
+        recovery_fstab_path = "BOOT/RAMDISK/etc/recovery.fstab"
+    else:
+      path = os.path.join(input_file, *recovery_fstab_path.split("/"))
+      if not os.path.exists(path):
+        recovery_fstab_path = "BOOT/RAMDISK/etc/recovery.fstab"
+    d["fstab"] = LoadRecoveryFSTab(
+        read_helper, d["fstab_version"], recovery_fstab_path, system_root_image)
+
   else:
     d["fstab"] = None
 
-  d["build.prop"] = LoadBuildProp(read_helper, 'SYSTEM/build.prop')
-  d["vendor.build.prop"] = LoadBuildProp(read_helper, 'VENDOR/build.prop')
+  # Tries to load the build props for all partitions with care_map, including
+  # system and vendor.
+  for partition in PARTITIONS_WITH_CARE_MAP:
+    d["{}.build.prop".format(partition)] = LoadBuildProp(
+        read_helper, "{}/build.prop".format(partition.upper()))
+  d["build.prop"] = d["system.build.prop"]
 
   # Set up the salt (based on fingerprint or thumbprint) that will be used when
   # adding AVB footer.
@@ -270,7 +407,7 @@
   try:
     data = read_helper(prop_file)
   except KeyError:
-    print("Warning: could not read %s" % (prop_file,))
+    logger.warning("Failed to read %s", prop_file)
     data = ""
   return LoadDictionaryFromLines(data.split("\n"))
 
@@ -300,7 +437,7 @@
   try:
     data = read_helper(recovery_fstab_path)
   except KeyError:
-    print("Warning: could not find {}".format(recovery_fstab_path))
+    logger.warning("Failed to find %s", recovery_fstab_path)
     data = ""
 
   assert fstab_version == 2
@@ -353,7 +490,7 @@
 
 def DumpInfoDict(d):
   for k, v in sorted(d.items()):
-    print("%-25s = (%s) %s" % (k, type(v).__name__, v))
+    logger.info("%-25s = (%s) %s", k, type(v).__name__, v)
 
 
 def AppendAVBSigningArgs(cmd, partition):
@@ -365,10 +502,36 @@
     cmd.extend(["--key", key_path, "--algorithm", algorithm])
   avb_salt = OPTIONS.info_dict.get("avb_salt")
   # make_vbmeta_image doesn't like "--salt" (and it's not needed).
-  if avb_salt and partition != "vbmeta":
+  if avb_salt and not partition.startswith("vbmeta"):
     cmd.extend(["--salt", avb_salt])
 
 
+def GetAvbChainedPartitionArg(partition, info_dict, key=None):
+  """Constructs and returns the arg to build or verify a chained partition.
+
+  Args:
+    partition: The partition name.
+    info_dict: The info dict to look up the key info and rollback index
+        location.
+    key: The key to be used for building or verifying the partition. Defaults to
+        the key listed in info_dict.
+
+  Returns:
+    A string of form "partition:rollback_index_location:key" that can be used to
+    build or verify vbmeta image.
+  """
+  if key is None:
+    key = info_dict["avb_" + partition + "_key_path"]
+  avbtool = os.getenv('AVBTOOL') or info_dict["avb_avbtool"]
+  pubkey_path = MakeTempFile(prefix="avb-", suffix=".pubkey")
+  RunAndCheckOutput(
+      [avbtool, "extract_public_key", "--key", key, "--output", pubkey_path])
+
+  rollback_index_location = info_dict[
+      "avb_" + partition + "_rollback_index_location"]
+  return "{}:{}:{}".format(partition, rollback_index_location, pubkey_path)
+
+
 def _BuildBootableImage(sourcedir, fs_config_file, info_dict=None,
                         has_ramdisk=False, two_step_image=False):
   """Build a bootable image from the specified sourcedir.
@@ -439,11 +602,11 @@
     cmd.append("--pagesize")
     cmd.append(open(fn).read().rstrip("\n"))
 
-  args = info_dict.get("mkbootimg_args", None)
+  args = info_dict.get("mkbootimg_args")
   if args and args.strip():
     cmd.extend(shlex.split(args))
 
-  args = info_dict.get("mkbootimg_version_args", None)
+  args = info_dict.get("mkbootimg_version_args")
   if args and args.strip():
     cmd.extend(shlex.split(args))
 
@@ -451,7 +614,7 @@
     cmd.extend(["--ramdisk", ramdisk_img.name])
 
   img_unsigned = None
-  if info_dict.get("vboot", None):
+  if info_dict.get("vboot"):
     img_unsigned = tempfile.NamedTemporaryFile()
     cmd.extend(["--output", img_unsigned.name])
   else:
@@ -465,12 +628,10 @@
     fn = os.path.join(sourcedir, "recovery_dtbo")
     cmd.extend(["--recovery_dtbo", fn])
 
-  p = Run(cmd, stdout=subprocess.PIPE)
-  p.communicate()
-  assert p.returncode == 0, "mkbootimg of %s image failed" % (partition_name,)
+  RunAndCheckOutput(cmd)
 
-  if (info_dict.get("boot_signer", None) == "true" and
-      info_dict.get("verity_key", None)):
+  if (info_dict.get("boot_signer") == "true" and
+      info_dict.get("verity_key")):
     # Hard-code the path as "/boot" for two-step special recovery image (which
     # will be loaded into /boot during the two-step OTA).
     if two_step_image:
@@ -482,12 +643,10 @@
     cmd.extend([path, img.name,
                 info_dict["verity_key"] + ".pk8",
                 info_dict["verity_key"] + ".x509.pem", img.name])
-    p = Run(cmd, stdout=subprocess.PIPE)
-    p.communicate()
-    assert p.returncode == 0, "boot_signer of %s image failed" % path
+    RunAndCheckOutput(cmd)
 
   # Sign the image if vboot is non-empty.
-  elif info_dict.get("vboot", None):
+  elif info_dict.get("vboot"):
     path = "/" + partition_name
     img_keyblock = tempfile.NamedTemporaryFile()
     # We have switched from the prebuilt futility binary to using the tool
@@ -502,9 +661,7 @@
            info_dict["vboot_subkey"] + ".vbprivk",
            img_keyblock.name,
            img.name]
-    p = Run(cmd, stdout=subprocess.PIPE)
-    p.communicate()
-    assert p.returncode == 0, "vboot_signer of %s image failed" % path
+    RunAndCheckOutput(cmd)
 
     # Clean up the temp files.
     img_unsigned.close()
@@ -521,10 +678,7 @@
     args = info_dict.get("avb_" + partition_name + "_add_hash_footer_args")
     if args and args.strip():
       cmd.extend(shlex.split(args))
-    p = Run(cmd, stdout=subprocess.PIPE)
-    p.communicate()
-    assert p.returncode == 0, "avbtool add_hash_footer of %s failed" % (
-        partition_name,)
+    RunAndCheckOutput(cmd)
 
   img.seek(os.SEEK_SET, 0)
   data = img.read()
@@ -546,15 +700,15 @@
 
   prebuilt_path = os.path.join(unpack_dir, "BOOTABLE_IMAGES", prebuilt_name)
   if os.path.exists(prebuilt_path):
-    print("using prebuilt %s from BOOTABLE_IMAGES..." % (prebuilt_name,))
+    logger.info("using prebuilt %s from BOOTABLE_IMAGES...", prebuilt_name)
     return File.FromLocalFile(name, prebuilt_path)
 
   prebuilt_path = os.path.join(unpack_dir, "IMAGES", prebuilt_name)
   if os.path.exists(prebuilt_path):
-    print("using prebuilt %s from IMAGES..." % (prebuilt_name,))
+    logger.info("using prebuilt %s from IMAGES...", prebuilt_name)
     return File.FromLocalFile(name, prebuilt_path)
 
-  print("building image from target_files %s..." % (tree_subdir,))
+  logger.info("building image from target_files %s...", tree_subdir)
 
   if info_dict is None:
     info_dict = OPTIONS.info_dict
@@ -576,9 +730,9 @@
 
 
 def Gunzip(in_filename, out_filename):
-  """Gunzip the given gzip compressed file to a given output file.
-  """
-  with gzip.open(in_filename, "rb") as in_file, open(out_filename, "wb") as out_file:
+  """Gunzips the given gzip compressed file to a given output file."""
+  with gzip.open(in_filename, "rb") as in_file, \
+       open(out_filename, "wb") as out_file:
     shutil.copyfileobj(in_file, out_file)
 
 
@@ -596,11 +750,7 @@
     cmd = ["unzip", "-o", "-q", filename, "-d", dirname]
     if pattern is not None:
       cmd.extend(pattern)
-    p = Run(cmd, stdout=subprocess.PIPE)
-    p.communicate()
-    if p.returncode != 0:
-      raise ExternalError("failed to unzip input target-files \"%s\"" %
-                          (filename,))
+    RunAndCheckOutput(cmd)
 
   tmp = MakeTempDir(prefix="targetfiles-")
   m = re.match(r"^(.*[.]zip)\+(.*[.]zip)$", filename, re.IGNORECASE)
@@ -614,7 +764,8 @@
   return tmp
 
 
-def GetSparseImage(which, tmpdir, input_zip, allow_shared_blocks):
+def GetSparseImage(which, tmpdir, input_zip, allow_shared_blocks,
+                   hashtree_info_generator=None):
   """Returns a SparseImage object suitable for passing to BlockImageDiff.
 
   This function loads the specified sparse image from the given path, and
@@ -627,7 +778,8 @@
     tmpdir: The directory that contains the prebuilt image and block map file.
     input_zip: The target-files ZIP archive.
     allow_shared_blocks: Whether having shared blocks is allowed.
-
+    hashtree_info_generator: If present, generates the hashtree_info for this
+        sparse image.
   Returns:
     A SparseImage object, with file_map info loaded.
   """
@@ -645,27 +797,40 @@
   # unconditionally. Note that they are still part of care_map. (Bug: 20939131)
   clobbered_blocks = "0"
 
-  image = sparse_img.SparseImage(path, mappath, clobbered_blocks,
-                                 allow_shared_blocks=allow_shared_blocks)
+  image = sparse_img.SparseImage(
+      path, mappath, clobbered_blocks, allow_shared_blocks=allow_shared_blocks,
+      hashtree_info_generator=hashtree_info_generator)
 
   # block.map may contain less blocks, because mke2fs may skip allocating blocks
   # if they contain all zeros. We can't reconstruct such a file from its block
   # list. Tag such entries accordingly. (Bug: 65213616)
   for entry in image.file_map:
-    # "/system/framework/am.jar" => "SYSTEM/framework/am.jar".
-    arcname = string.replace(entry, which, which.upper(), 1)[1:]
     # Skip artificial names, such as "__ZERO", "__NONZERO-1".
-    if arcname not in input_zip.namelist():
+    if not entry.startswith('/'):
       continue
 
+    # "/system/framework/am.jar" => "SYSTEM/framework/am.jar". Note that the
+    # filename listed in system.map may contain an additional leading slash
+    # (i.e. "//system/framework/am.jar"). Using lstrip to get consistent
+    # results.
+    arcname = string.replace(entry, which, which.upper(), 1).lstrip('/')
+
+    # Special handling another case, where files not under /system
+    # (e.g. "/sbin/charger") are packed under ROOT/ in a target_files.zip.
+    if which == 'system' and not arcname.startswith('SYSTEM'):
+      arcname = 'ROOT/' + arcname
+
+    assert arcname in input_zip.namelist(), \
+        "Failed to find the ZIP entry for {}".format(entry)
+
     info = input_zip.getinfo(arcname)
     ranges = image.file_map[entry]
 
     # If a RangeSet has been tagged as using shared blocks while loading the
-    # image, its block list must be already incomplete due to that reason. Don't
-    # give it 'incomplete' tag to avoid messing up the imgdiff stats.
+    # image, check the original block list to determine its completeness. Note
+    # that the 'incomplete' flag would be tagged to the original RangeSet only.
     if ranges.extra.get('uses_shared_blocks'):
-      continue
+      ranges = ranges.extra['uses_shared_blocks']
 
     if RoundUpTo4K(info.file_size) > ranges.size() * 4096:
       ranges.extra['incomplete'] = True
@@ -718,23 +883,36 @@
   devnull.close()
 
   key_passwords.update(PasswordManager().GetPasswords(need_passwords))
-  key_passwords.update(dict.fromkeys(no_passwords, None))
+  key_passwords.update(dict.fromkeys(no_passwords))
   return key_passwords
 
 
 def GetMinSdkVersion(apk_name):
-  """Get the minSdkVersion delared in the APK. This can be both a decimal number
-  (API Level) or a codename.
+  """Gets the minSdkVersion declared in the APK.
+
+  It calls 'aapt' to query the embedded minSdkVersion from the given APK file.
+  This can be both a decimal number (API Level) or a codename.
+
+  Args:
+    apk_name: The APK filename.
+
+  Returns:
+    The parsed SDK version string.
+
+  Raises:
+    ExternalError: On failing to obtain the min SDK version.
   """
+  proc = Run(
+      ["aapt", "dump", "badging", apk_name], stdout=subprocess.PIPE,
+      stderr=subprocess.PIPE)
+  stdoutdata, stderrdata = proc.communicate()
+  if proc.returncode != 0:
+    raise ExternalError(
+        "Failed to obtain minSdkVersion: aapt return code {}:\n{}\n{}".format(
+            proc.returncode, stdoutdata, stderrdata))
 
-  p = Run(["aapt", "dump", "badging", apk_name], stdout=subprocess.PIPE)
-  output, err = p.communicate()
-  if err:
-    raise ExternalError("Failed to obtain minSdkVersion: aapt return code %s"
-        % (p.returncode,))
-
-  for line in output.split("\n"):
-    # Looking for lines such as sdkVersion:'23' or sdkVersion:'M'
+  for line in stdoutdata.split("\n"):
+    # Looking for lines such as sdkVersion:'23' or sdkVersion:'M'.
     m = re.match(r'sdkVersion:\'([^\']*)\'', line)
     if m:
       return m.group(1)
@@ -742,11 +920,20 @@
 
 
 def GetMinSdkVersionInt(apk_name, codename_to_api_level_map):
-  """Get the minSdkVersion declared in the APK as a number (API Level). If
-  minSdkVersion is set to a codename, it is translated to a number using the
-  provided map.
-  """
+  """Returns the minSdkVersion declared in the APK as a number (API Level).
 
+  If minSdkVersion is set to a codename, it is translated to a number using the
+  provided map.
+
+  Args:
+    apk_name: The APK filename.
+
+  Returns:
+    The parsed SDK version number.
+
+  Raises:
+    ExternalError: On failing to get the min SDK version number.
+  """
   version = GetMinSdkVersion(apk_name)
   try:
     return int(version)
@@ -755,13 +942,13 @@
     if version in codename_to_api_level_map:
       return codename_to_api_level_map[version]
     else:
-      raise ExternalError("Unknown minSdkVersion: '%s'. Known codenames: %s"
-                          % (version, codename_to_api_level_map))
+      raise ExternalError(
+          "Unknown minSdkVersion: '{}'. Known codenames: {}".format(
+              version, codename_to_api_level_map))
 
 
 def SignFile(input_name, output_name, key, password, min_api_level=None,
-    codename_to_api_level_map=dict(),
-    whole_file=False):
+             codename_to_api_level_map=None, whole_file=False):
   """Sign the input_name zip/jar/apk, producing output_name.  Use the
   given key and password (the latter may be None if the key does not
   have a password.
@@ -777,6 +964,8 @@
   codename_to_api_level_map is needed to translate the codename which may be
   encountered as the APK's minSdkVersion.
   """
+  if codename_to_api_level_map is None:
+    codename_to_api_level_map = {}
 
   java_library_path = os.path.join(
       OPTIONS.search_path, OPTIONS.signapk_shared_library_path)
@@ -800,12 +989,14 @@
               key + OPTIONS.private_key_suffix,
               input_name, output_name])
 
-  p = Run(cmd, stdin=subprocess.PIPE, stdout=subprocess.PIPE)
+  proc = Run(cmd, stdin=subprocess.PIPE)
   if password is not None:
     password += "\n"
-  p.communicate(password)
-  if p.returncode != 0:
-    raise ExternalError("signapk.jar failed: return code %s" % (p.returncode,))
+  stdoutdata, _ = proc.communicate(password)
+  if proc.returncode != 0:
+    raise ExternalError(
+        "Failed to run signapk.jar: return code {}:\n{}".format(
+            proc.returncode, stdoutdata))
 
 
 def CheckSize(data, target, info_dict):
@@ -835,7 +1026,7 @@
     device = p.device
     if "/" in device:
       device = device[device.rfind("/")+1:]
-    limit = info_dict.get(device + "_size", None)
+    limit = info_dict.get(device + "_size")
   if not fs_type or not limit:
     return
 
@@ -853,9 +1044,9 @@
     if pct >= 99.0:
       raise ExternalError(msg)
     elif pct >= 95.0:
-      print("\n  WARNING: %s\n" % (msg,))
-    elif OPTIONS.verbose:
-      print("  ", msg)
+      logger.warning("\n  WARNING: %s\n", msg)
+    else:
+      logger.info("  %s", msg)
 
 
 def ReadApkCerts(tf_zip):
@@ -938,17 +1129,18 @@
 
 
 COMMON_DOCSTRING = """
-  -p  (--path)  <dir>
-      Prepend <dir>/bin to the list of places to search for binaries
-      run by this script, and expect to find jars in <dir>/framework.
+Global options
+
+  -p  (--path) <dir>
+      Prepend <dir>/bin to the list of places to search for binaries run by this
+      script, and expect to find jars in <dir>/framework.
 
   -s  (--device_specific) <file>
-      Path to the python module containing device-specific
-      releasetools code.
+      Path to the Python module containing device-specific releasetools code.
 
-  -x  (--extra)  <key=value>
-      Add a key/value pair to the 'extras' dict, which device-specific
-      extension code may look at.
+  -x  (--extra) <key=value>
+      Add a key/value pair to the 'extras' dict, which device-specific extension
+      code may look at.
 
   -v  (--verbose)
       Show command lines being executed.
@@ -1064,8 +1256,8 @@
 
 class PasswordManager(object):
   def __init__(self):
-    self.editor = os.getenv("EDITOR", None)
-    self.pwfile = os.getenv("ANDROID_PW_FILE", None)
+    self.editor = os.getenv("EDITOR")
+    self.pwfile = os.getenv("ANDROID_PW_FILE")
 
   def GetPasswords(self, items):
     """Get passwords corresponding to each string in 'items',
@@ -1137,8 +1329,7 @@
         first_line = i + 4
     f.close()
 
-    p = Run([self.editor, "+%d" % (first_line,), self.pwfile])
-    _, _ = p.communicate()
+    RunAndCheckOutput([self.editor, "+%d" % (first_line,), self.pwfile])
 
     return self.ReadFile()
 
@@ -1154,13 +1345,13 @@
           continue
         m = re.match(r"^\[\[\[\s*(.*?)\s*\]\]\]\s*(\S+)$", line)
         if not m:
-          print("failed to parse password file: ", line)
+          logger.warning("Failed to parse password file: %s", line)
         else:
           result[m.group(2)] = m.group(1)
       f.close()
     except IOError as e:
       if e.errno != errno.ENOENT:
-        print("error reading password file: ", str(e))
+        logger.exception("Error reading password file:")
     return result
 
 
@@ -1193,8 +1384,12 @@
     os.chmod(filename, perms)
 
     # Use a fixed timestamp so the output is repeatable.
-    epoch = datetime.datetime.fromtimestamp(0)
-    timestamp = (datetime.datetime(2009, 1, 1) - epoch).total_seconds()
+    # Note: Use of fromtimestamp rather than utcfromtimestamp here is
+    # intentional. zip stores datetimes in local time without a time zone
+    # attached, so we need "epoch" but in the local time zone to get 2009/01/01
+    # in the zip archive.
+    local_epoch = datetime.datetime.fromtimestamp(0)
+    timestamp = (datetime.datetime(2009, 1, 1) - local_epoch).total_seconds()
     os.utime(filename, (timestamp, timestamp))
 
     zip_file.write(filename, arcname=arcname, compress_type=compress_type)
@@ -1262,10 +1457,7 @@
   if isinstance(entries, basestring):
     entries = [entries]
   cmd = ["zip", "-d", zip_filename] + entries
-  proc = Run(cmd, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
-  stdoutdata, _ = proc.communicate()
-  assert proc.returncode == 0, "Failed to delete %s:\n%s" % (entries,
-                                                             stdoutdata)
+  RunAndCheckOutput(cmd)
 
 
 def ZipClose(zip_file):
@@ -1303,10 +1495,10 @@
           if x == ".py":
             f = b
           info = imp.find_module(f, [d])
-        print("loaded device-specific extensions from", path)
+        logger.info("loaded device-specific extensions from %s", path)
         self.module = imp.load_module("device_specific", *info)
       except ImportError:
-        print("unable to load device-specific module; assuming none")
+        logger.info("unable to load device-specific module; assuming none")
 
   def _DoCall(self, function_name, *args, **kwargs):
     """Call the named function in the device-specific module, passing
@@ -1315,7 +1507,7 @@
     module does not define the function, return the value of the
     'default' kwarg (which itself defaults to None)."""
     if self.module is None or not hasattr(self.module, function_name):
-      return kwargs.get("default", None)
+      return kwargs.get("default")
     return getattr(self.module, function_name)(*((self,) + args), **kwargs)
 
   def FullOTA_Assertions(self):
@@ -1365,8 +1557,9 @@
   def VerifyOTA_Assertions(self):
     return self._DoCall("VerifyOTA_Assertions")
 
+
 class File(object):
-  def __init__(self, name, data, compress_size = None):
+  def __init__(self, name, data, compress_size=None):
     self.name = name
     self.data = data
     self.size = len(data)
@@ -1393,6 +1586,7 @@
   def AddToZip(self, z, compression=None):
     ZipWriteStr(z, self.name, self.data, compress_type=compression)
 
+
 DIFF_PROGRAM_BY_EXT = {
     ".gz" : "imgdiff",
     ".zip" : ["imgdiff", "-z"],
@@ -1401,6 +1595,7 @@
     ".img" : "imgdiff",
     }
 
+
 class Difference(object):
   def __init__(self, tf, sf, diff_program=None):
     self.tf = tf
@@ -1445,7 +1640,7 @@
       th.start()
       th.join(timeout=300)   # 5 mins
       if th.is_alive():
-        print("WARNING: diff command timed out")
+        logger.warning("diff command timed out")
         p.terminate()
         th.join(5)
         if th.is_alive():
@@ -1453,8 +1648,7 @@
           th.join()
 
       if p.returncode != 0:
-        print("WARNING: failure running %s:\n%s\n" % (
-            diff_program, "".join(err)))
+        logger.warning("Failure running %s:\n%s\n", diff_program, "".join(err))
         self.patch = None
         return None, None, None
       diff = ptemp.read()
@@ -1468,15 +1662,17 @@
 
 
   def GetPatch(self):
-    """Return a tuple (target_file, source_file, patch_data).
+    """Returns a tuple of (target_file, source_file, patch_data).
+
     patch_data may be None if ComputePatch hasn't been called, or if
-    computing the patch failed."""
+    computing the patch failed.
+    """
     return self.tf, self.sf, self.patch
 
 
 def ComputeDifferences(diffs):
   """Call ComputePatch on all the Difference objects in 'diffs'."""
-  print(len(diffs), "diffs to compute")
+  logger.info("%d diffs to compute", len(diffs))
 
   # Do the largest files first, to try and reduce the long-pole effect.
   by_size = [(i.tf.size, i) for i in diffs]
@@ -1502,13 +1698,14 @@
         else:
           name = "%s (%s)" % (tf.name, sf.name)
         if patch is None:
-          print("patching failed!                                  %s" % (name,))
+          logger.error("patching failed! %40s", name)
         else:
-          print("%8.2f sec %8d / %8d bytes (%6.2f%%) %s" % (
-              dur, len(patch), tf.size, 100.0 * len(patch) / tf.size, name))
+          logger.info(
+              "%8.2f sec %8d / %8d bytes (%6.2f%%) %s", dur, len(patch),
+              tf.size, 100.0 * len(patch) / tf.size, name)
       lock.release()
-    except Exception as e:
-      print(e)
+    except Exception:
+      logger.exception("Failed to compute diff from worker")
       raise
 
   # start worker threads; wait for them all to finish.
@@ -1555,7 +1752,8 @@
   def required_cache(self):
     return self._required_cache
 
-  def WriteScript(self, script, output_zip, progress=None):
+  def WriteScript(self, script, output_zip, progress=None,
+                  write_verify_script=False):
     if not self.src:
       # write the output unconditionally
       script.Print("Patching %s image unconditionally..." % (self.partition,))
@@ -1565,7 +1763,8 @@
     if progress:
       script.ShowProgress(progress, 0)
     self._WriteUpdate(script, output_zip)
-    if OPTIONS.verify:
+
+    if write_verify_script:
       self._WritePostInstallVerifyScript(script)
 
   def WriteStrictVerifyScript(self, script):
@@ -1579,12 +1778,12 @@
     script.Print("Verifying %s..." % (partition,))
     ranges = self.tgt.care_map
     ranges_str = ranges.to_string_raw()
-    script.AppendExtra('range_sha1("%s", "%s") == "%s" && '
-                       'ui_print("    Verified.") || '
-                       'ui_print("\\"%s\\" has unexpected contents.");' % (
-                       self.device, ranges_str,
-                       self.tgt.TotalSha1(include_clobbered_blocks=True),
-                       self.device))
+    script.AppendExtra(
+        'range_sha1("%s", "%s") == "%s" && ui_print("    Verified.") || '
+        'ui_print("\\"%s\\" has unexpected contents.");' % (
+            self.device, ranges_str,
+            self.tgt.TotalSha1(include_clobbered_blocks=True),
+            self.device))
     script.AppendExtra("")
 
   def WriteVerifyScript(self, script, touched_blocks_only=False):
@@ -1608,12 +1807,12 @@
         return
 
       ranges_str = ranges.to_string_raw()
-      script.AppendExtra(('if (range_sha1("%s", "%s") == "%s" || '
-                          'block_image_verify("%s", '
-                          'package_extract_file("%s.transfer.list"), '
-                          '"%s.new.dat", "%s.patch.dat")) then') % (
-                          self.device, ranges_str, expected_sha1,
-                          self.device, partition, partition, partition))
+      script.AppendExtra(
+          'if (range_sha1("%s", "%s") == "%s" || block_image_verify("%s", '
+          'package_extract_file("%s.transfer.list"), "%s.new.dat", '
+          '"%s.patch.dat")) then' % (
+              self.device, ranges_str, expected_sha1,
+              self.device, partition, partition, partition))
       script.Print('Verified %s image...' % (partition,))
       script.AppendExtra('else')
 
@@ -1663,17 +1862,19 @@
     # Unlike pre-install verification, clobbered_blocks should not be ignored.
     ranges = self.tgt.care_map
     ranges_str = ranges.to_string_raw()
-    script.AppendExtra('if range_sha1("%s", "%s") == "%s" then' % (
-                       self.device, ranges_str,
-                       self.tgt.TotalSha1(include_clobbered_blocks=True)))
+    script.AppendExtra(
+        'if range_sha1("%s", "%s") == "%s" then' % (
+            self.device, ranges_str,
+            self.tgt.TotalSha1(include_clobbered_blocks=True)))
 
     # Bug: 20881595
     # Verify that extended blocks are really zeroed out.
     if self.tgt.extended:
       ranges_str = self.tgt.extended.to_string_raw()
-      script.AppendExtra('if range_sha1("%s", "%s") == "%s" then' % (
-                         self.device, ranges_str,
-                         self._HashZeroBlocks(self.tgt.extended.size())))
+      script.AppendExtra(
+          'if range_sha1("%s", "%s") == "%s" then' % (
+              self.device, ranges_str,
+              self._HashZeroBlocks(self.tgt.extended.size())))
       script.Print('Verified the updated %s image.' % (partition,))
       if partition == "system":
         code = ErrorCode.SYSTEM_NONZERO_CONTENTS
@@ -1703,9 +1904,9 @@
              '{}.transfer.list'.format(self.path),
              '{}.transfer.list'.format(self.partition))
 
-    # For full OTA, compress the new.dat with brotli with quality 6 to reduce its size. Quailty 9
-    # almost triples the compression time but doesn't further reduce the size too much.
-    # For a typical 1.8G system.new.dat
+    # For full OTA, compress the new.dat with brotli with quality 6 to reduce
+    # its size. Quailty 9 almost triples the compression time but doesn't
+    # further reduce the size too much. For a typical 1.8G system.new.dat
     #                       zip  | brotli(quality 6)  | brotli(quality 9)
     #   compressed_size:    942M | 869M (~8% reduced) | 854M
     #   compression_time:   75s  | 265s               | 719s
@@ -1716,10 +1917,7 @@
                     '--output={}.new.dat.br'.format(self.path),
                     '{}.new.dat'.format(self.path)]
       print("Compressing {}.new.dat with brotli".format(self.partition))
-      p = Run(brotli_cmd, stdout=subprocess.PIPE)
-      p.communicate()
-      assert p.returncode == 0,\
-          'compression of {}.new.dat failed'.format(self.partition)
+      RunAndCheckOutput(brotli_cmd)
 
       new_data_name = '{}.new.dat.br'.format(self.partition)
       ZipWrite(output_zip,
@@ -1769,6 +1967,7 @@
 
 DataImage = blockimgdiff.DataImage
 
+
 # map recovery.fstab's fs_types to mount/format "partition types"
 PARTITION_TYPES = {
     "ext4": "EMMC",
@@ -1777,6 +1976,7 @@
     "squashfs": "EMMC"
 }
 
+
 def GetTypeAndDevice(mount_point, info):
   fstab = info["fstab"]
   if fstab:
@@ -1871,7 +2071,7 @@
       if os.path.exists(path):
         diff_program.append("-b")
         diff_program.append(path)
-        bonus_args = "-b /system/etc/recovery-resource.dat"
+        bonus_args = "--bonus /system/etc/recovery-resource.dat"
       else:
         bonus_args = ""
 
@@ -1889,8 +2089,12 @@
 
   if full_recovery_image:
     sh = """#!/system/bin/sh
-if ! applypatch -c %(type)s:%(device)s:%(size)d:%(sha1)s; then
-  applypatch /system/etc/recovery.img %(type)s:%(device)s %(sha1)s %(size)d && log -t recovery "Installing new recovery image: succeeded" || log -t recovery "Installing new recovery image: failed"
+if ! applypatch --check %(type)s:%(device)s:%(size)d:%(sha1)s; then
+  applypatch \\
+          --flash /system/etc/recovery.img \\
+          --target %(type)s:%(device)s:%(size)d:%(sha1)s && \\
+      log -t recovery "Installing new recovery image: succeeded" || \\
+      log -t recovery "Installing new recovery image: failed"
 else
   log -t recovery "Recovery image already installed"
 fi
@@ -1900,8 +2104,13 @@
        'size': recovery_img.size}
   else:
     sh = """#!/system/bin/sh
-if ! applypatch -c %(recovery_type)s:%(recovery_device)s:%(recovery_size)d:%(recovery_sha1)s; then
-  applypatch %(bonus_args)s %(boot_type)s:%(boot_device)s:%(boot_size)d:%(boot_sha1)s %(recovery_type)s:%(recovery_device)s %(recovery_sha1)s %(recovery_size)d %(boot_sha1)s:/system/recovery-from-boot.p && log -t recovery "Installing new recovery image: succeeded" || log -t recovery "Installing new recovery image: failed"
+if ! applypatch --check %(recovery_type)s:%(recovery_device)s:%(recovery_size)d:%(recovery_sha1)s; then
+  applypatch %(bonus_args)s \\
+          --patch /system/recovery-from-boot.p \\
+          --source %(boot_type)s:%(boot_device)s:%(boot_size)d:%(boot_sha1)s \\
+          --target %(recovery_type)s:%(recovery_device)s:%(recovery_size)d:%(recovery_sha1)s && \\
+      log -t recovery "Installing new recovery image: succeeded" || \\
+      log -t recovery "Installing new recovery image: failed"
 else
   log -t recovery "Recovery image already installed"
 fi
@@ -1919,6 +2128,6 @@
   # in the L release.
   sh_location = "bin/install-recovery.sh"
 
-  print("putting script in", sh_location)
+  logger.info("putting script in %s", sh_location)
 
   output_sink(sh_location, sh)
diff --git a/tools/releasetools/edify_generator.py b/tools/releasetools/edify_generator.py
index 7a81928..7ed85fe 100644
--- a/tools/releasetools/edify_generator.py
+++ b/tools/releasetools/edify_generator.py
@@ -31,14 +31,6 @@
     else:
       self.fstab = fstab
 
-  def MakeTemporary(self):
-    """Make a temporary script object whose commands can latter be
-    appended to the parent script with AppendScript().  Used when the
-    caller wants to generate script commands out-of-order."""
-    x = EdifyGenerator(self.version, self.info)
-    x.mounts = self.mounts
-    return x
-
   @property
   def required_cache(self):
     """Return the minimum cache size to apply the update."""
@@ -140,8 +132,8 @@
     self.script.append(
         ('(!less_than_int(%s, getprop("ro.build.date.utc"))) || '
          'abort("E%d: Can\'t install this package (%s) over newer '
-         'build (" + getprop("ro.build.date") + ").");') % (timestamp,
-             common.ErrorCode.OLDER_BUILD, timestamp_text))
+         'build (" + getprop("ro.build.date") + ").");') % (
+             timestamp, common.ErrorCode.OLDER_BUILD, timestamp_text))
 
   def AssertDevice(self, device):
     """Assert that the device identifier is the given string."""
@@ -171,31 +163,32 @@
     [0,1]."""
     self.script.append("set_progress(%f);" % (frac,))
 
-  def PatchCheck(self, filename, *sha1):
-    """Check that the given file has one of the
-    given *sha1 hashes, checking the version saved in cache if the
-    file does not match."""
-    self.script.append(
-        'apply_patch_check("%s"' % (filename,) +
-        "".join([', "%s"' % (i,) for i in sha1]) +
-        ') || abort("E%d: \\"%s\\" has unexpected contents.");' % (
-            common.ErrorCode.BAD_PATCH_FILE, filename))
+  def PatchCheck(self, filename, *sha1):  # pylint: disable=unused-argument
+    """Checks that the given partition has the desired checksum.
 
-  def Verify(self, filename):
-    """Check that the given file has one of the
-    given hashes (encoded in the filename)."""
-    self.script.append(
-        'apply_patch_check("{filename}") && '
-        'ui_print("    Verified.") || '
-        'ui_print("\\"{filename}\\" has unexpected contents.");'.format(
-            filename=filename))
+    The call to this function is being deprecated in favor of
+    PatchPartitionCheck(). It will try to parse and handle the old format,
+    unless the format is unknown.
+    """
+    tokens = filename.split(':')
+    assert len(tokens) == 6 and tokens[0] == 'EMMC', \
+        "Failed to handle unknown format. Use PatchPartitionCheck() instead."
+    source = '{}:{}:{}:{}'.format(tokens[0], tokens[1], tokens[2], tokens[3])
+    target = '{}:{}:{}:{}'.format(tokens[0], tokens[1], tokens[4], tokens[5])
+    self.PatchPartitionCheck(target, source)
 
-  def FileCheck(self, filename, *sha1):
-    """Check that the given file has one of the
-    given *sha1 hashes."""
-    self.script.append('assert(sha1_check(read_file("%s")' % (filename,) +
-                       "".join([', "%s"' % (i,) for i in sha1]) +
-                       '));')
+  def PatchPartitionCheck(self, target, source):
+    """Checks whether updater can patch the given partitions.
+
+    It checks the checksums of the given partitions. If none of them matches the
+    expected checksum, updater will additionally look for a backup on /cache.
+    """
+    self.script.append(self.WordWrap((
+        'patch_partition_check("{target}",\0"{source}") ||\n    abort('
+        '"E{code}: \\"{target}\\" or \\"{source}\\" has unexpected '
+        'contents.");').format(
+            target=target, source=source,
+            code=common.ErrorCode.BAD_PATCH_FILE)))
 
   def CacheFreeSpaceCheck(self, amount):
     """Check that there's at least 'amount' space that can be made
@@ -275,17 +268,41 @@
   def ApplyPatch(self, srcfile, tgtfile, tgtsize, tgtsha1, *patchpairs):
     """Apply binary patches (in *patchpairs) to the given srcfile to
     produce tgtfile (which may be "-" to indicate overwriting the
-    source file."""
-    if len(patchpairs) % 2 != 0 or len(patchpairs) == 0:
-      raise ValueError("bad patches given to ApplyPatch")
-    cmd = ['apply_patch("%s",\0"%s",\0%s,\0%d'
-           % (srcfile, tgtfile, tgtsha1, tgtsize)]
-    for i in range(0, len(patchpairs), 2):
-      cmd.append(',\0%s,\0package_extract_file("%s")' % patchpairs[i:i+2])
-    cmd.append(') ||\n    abort("E%d: Failed to apply patch to %s");' % (
-        common.ErrorCode.APPLY_PATCH_FAILURE, srcfile))
-    cmd = "".join(cmd)
-    self.script.append(self.WordWrap(cmd))
+    source file.
+
+    This edify function is being deprecated in favor of PatchPartition(). It
+    will try to redirect calls to PatchPartition() if possible. On unknown /
+    invalid inputs, raises an exception.
+    """
+    tokens = srcfile.split(':')
+    assert (len(tokens) == 6 and tokens[0] == 'EMMC' and tgtfile == '-' and
+            len(patchpairs) == 2), \
+        "Failed to handle unknown format. Use PatchPartition() instead."
+
+    # Also sanity check the args.
+    assert tokens[3] == patchpairs[0], \
+        "Found mismatching values for source SHA-1: {} vs {}".format(
+            tokens[3], patchpairs[0])
+    assert int(tokens[4]) == tgtsize, \
+        "Found mismatching values for target size: {} vs {}".format(
+            tokens[4], tgtsize)
+    assert tokens[5] == tgtsha1, \
+        "Found mismatching values for target SHA-1: {} vs {}".format(
+            tokens[5], tgtsha1)
+
+    source = '{}:{}:{}:{}'.format(tokens[0], tokens[1], tokens[2], tokens[3])
+    target = '{}:{}:{}:{}'.format(tokens[0], tokens[1], tokens[4], tokens[5])
+    patch = patchpairs[1]
+    self.PatchPartition(target, source, patch)
+
+  def PatchPartition(self, target, source, patch):
+    """Applies the patch to the source partition and writes it to target."""
+    self.script.append(self.WordWrap((
+        'patch_partition("{target}",\0"{source}",\0'
+        'package_extract_file("{patch}")) ||\n'
+        '    abort("E{code}: Failed to apply patch to {source}");').format(
+            target=target, source=source, patch=patch,
+            code=common.ErrorCode.APPLY_PATCH_FAILURE)))
 
   def WriteRawImage(self, mount_point, fn, mapfn=None):
     """Write the given package file into the partition for the given
diff --git a/tools/releasetools/img_from_target_files.py b/tools/releasetools/img_from_target_files.py
index e6e8c9f..0156b72 100755
--- a/tools/releasetools/img_from_target_files.py
+++ b/tools/releasetools/img_from_target_files.py
@@ -28,17 +28,19 @@
 
 from __future__ import print_function
 
+import logging
+import os
+import shutil
 import sys
+import zipfile
+
+import common
 
 if sys.hexversion < 0x02070000:
   print("Python 2.7 or newer is required.", file=sys.stderr)
   sys.exit(1)
 
-import os
-import shutil
-import zipfile
-
-import common
+logger = logging.getLogger(__name__)
 
 OPTIONS = common.OPTIONS
 
@@ -51,11 +53,12 @@
 
 
 def main(argv):
-  bootable_only = [False]
+  # This allows modifying the value from inner function.
+  bootable_only_array = [False]
 
   def option_handler(o, _):
     if o in ("-z", "--bootable_zip"):
-      bootable_only[0] = True
+      bootable_only_array[0] = True
     else:
       return False
     return True
@@ -65,12 +68,14 @@
                              extra_long_opts=["bootable_zip"],
                              extra_option_handler=option_handler)
 
-  bootable_only = bootable_only[0]
+  bootable_only = bootable_only_array[0]
 
   if len(args) != 2:
     common.Usage(__doc__)
     sys.exit(1)
 
+  common.InitLogging()
+
   OPTIONS.input_tmp = common.UnzipTemp(args[0], ["IMAGES/*", "OTA/*"])
   output_zip = zipfile.ZipFile(args[1], "w", compression=zipfile.ZIP_DEFLATED)
   CopyInfo(output_zip)
@@ -89,11 +94,11 @@
       common.ZipWrite(output_zip, os.path.join(images_path, image), image)
 
   finally:
-    print("cleaning up...")
+    logger.info("cleaning up...")
     common.ZipClose(output_zip)
     shutil.rmtree(OPTIONS.input_tmp)
 
-  print("done.")
+  logger.info("done.")
 
 
 if __name__ == '__main__':
@@ -101,5 +106,5 @@
     common.CloseInheritedPipes()
     main(sys.argv[1:])
   except common.ExternalError as e:
-    print("\n   ERROR: %s\n" % (e,))
+    logger.exception("\n   ERROR:\n")
     sys.exit(1)
diff --git a/tools/releasetools/make_recovery_patch.py b/tools/releasetools/make_recovery_patch.py
index 7c6007e..725b355 100755
--- a/tools/releasetools/make_recovery_patch.py
+++ b/tools/releasetools/make_recovery_patch.py
@@ -16,24 +16,27 @@
 
 from __future__ import print_function
 
+import logging
+import os
 import sys
 
+import common
+
 if sys.hexversion < 0x02070000:
   print("Python 2.7 or newer is required.", file=sys.stderr)
   sys.exit(1)
 
-import os
-import common
+logger = logging.getLogger(__name__)
 
 OPTIONS = common.OPTIONS
 
-def main(argv):
-  # def option_handler(o, a):
-  #   return False
 
+def main(argv):
   args = common.ParseOptions(argv, __doc__)
   input_dir, output_dir = args
 
+  common.InitLogging()
+
   OPTIONS.info_dict = common.LoadInfoDict(input_dir)
 
   recovery_img = common.GetBootableImage("recovery.img", "recovery.img",
diff --git a/tools/releasetools/ota_from_target_files.py b/tools/releasetools/ota_from_target_files.py
index 10a19b3..7ec8ad8 100755
--- a/tools/releasetools/ota_from_target_files.py
+++ b/tools/releasetools/ota_from_target_files.py
@@ -15,54 +15,12 @@
 # limitations under the License.
 
 """
-Given a target-files zipfile, produces an OTA package that installs
-that build.  An incremental OTA is produced if -i is given, otherwise
-a full OTA is produced.
+Given a target-files zipfile, produces an OTA package that installs that build.
+An incremental OTA is produced if -i is given, otherwise a full OTA is produced.
 
-Usage:  ota_from_target_files [flags] input_target_files output_ota_package
+Usage:  ota_from_target_files [options] input_target_files output_ota_package
 
-  -k (--package_key) <key> Key to use to sign the package (default is
-      the value of default_system_dev_certificate from the input
-      target-files's META/misc_info.txt, or
-      "build/target/product/security/testkey" if that value is not
-      specified).
-
-      For incremental OTAs, the default value is based on the source
-      target-file, not the target build.
-
-  -i  (--incremental_from)  <file>
-      Generate an incremental OTA using the given target-files zip as
-      the starting build.
-
-  --full_radio
-      When generating an incremental OTA, always include a full copy of
-      radio image. This option is only meaningful when -i is specified,
-      because a full radio is always included in a full OTA if applicable.
-
-  --full_bootloader
-      Similar to --full_radio. When generating an incremental OTA, always
-      include a full copy of bootloader image.
-
-  --verify
-      Remount and verify the checksums of the files written to the system and
-      vendor (if used) partitions. Non-A/B incremental OTAs only.
-
-  -o  (--oem_settings)  <main_file[,additional_files...]>
-      Comma seperated list of files used to specify the expected OEM-specific
-      properties on the OEM partition of the intended device. Multiple expected
-      values can be used by providing multiple files. Only the first dict will
-      be used to compute fingerprint, while the rest will be used to assert
-      OEM-specific properties.
-
-  --oem_no_mount
-      For devices with OEM-specific properties but without an OEM partition,
-      do not mount the OEM partition in the updater-script. This should be
-      very rarely used, since it's expected to have a dedicated OEM partition
-      for OEM-specific properties. Only meaningful when -o is specified.
-
-  --wipe_user_data
-      Generate an OTA package that will wipe the user data partition
-      when installed.
+Common options that apply to both of non-A/B and A/B OTAs
 
   --downgrade
       Intentionally generate an incremental OTA that updates from a newer build
@@ -73,6 +31,19 @@
       will be used in the OTA package, unless --binary flag is specified. Please
       also check the comment for --override_timestamp below.
 
+  -i  (--incremental_from) <file>
+      Generate an incremental OTA using the given target-files zip as the
+      starting build.
+
+  -k  (--package_key) <key>
+      Key to use to sign the package (default is the value of
+      default_system_dev_certificate from the input target-files's
+      META/misc_info.txt, or "build/target/product/security/testkey" if that
+      value is not specified).
+
+      For incremental OTAs, the default value is based on the source
+      target-file, not the target build.
+
   --override_timestamp
       Intentionally generate an incremental OTA that updates from a newer build
       to an older one (based on timestamp comparison), by setting the downgrade
@@ -89,13 +60,77 @@
       based on timestamp) with the same "ota-downgrade=yes" flag, with the
       difference being whether "ota-wipe=yes" is set.
 
-  -e  (--extra_script)  <file>
+  --wipe_user_data
+      Generate an OTA package that will wipe the user data partition when
+      installed.
+
+  --retrofit_dynamic_partitions
+      Generates an OTA package that updates a device to support dynamic
+      partitions (default False). This flag is implied when generating
+      an incremental OTA where the base build does not support dynamic
+      partitions but the target build does. For A/B, when this flag is set,
+      --skip_postinstall is implied.
+
+Non-A/B OTA specific options
+
+  -b  (--binary) <file>
+      Use the given binary as the update-binary in the output package, instead
+      of the binary in the build's target_files. Use for development only.
+
+  --block
+      Generate a block-based OTA for non-A/B device. We have deprecated the
+      support for file-based OTA since O. Block-based OTA will be used by
+      default for all non-A/B devices. Keeping this flag here to not break
+      existing callers.
+
+  -e  (--extra_script) <file>
       Insert the contents of file at the end of the update script.
 
+  --full_bootloader
+      Similar to --full_radio. When generating an incremental OTA, always
+      include a full copy of bootloader image.
+
+  --full_radio
+      When generating an incremental OTA, always include a full copy of radio
+      image. This option is only meaningful when -i is specified, because a full
+      radio is always included in a full OTA if applicable.
+
+  --log_diff <file>
+      Generate a log file that shows the differences in the source and target
+      builds for an incremental package. This option is only meaningful when -i
+      is specified.
+
+  -o  (--oem_settings) <main_file[,additional_files...]>
+      Comma seperated list of files used to specify the expected OEM-specific
+      properties on the OEM partition of the intended device. Multiple expected
+      values can be used by providing multiple files. Only the first dict will
+      be used to compute fingerprint, while the rest will be used to assert
+      OEM-specific properties.
+
+  --oem_no_mount
+      For devices with OEM-specific properties but without an OEM partition, do
+      not mount the OEM partition in the updater-script. This should be very
+      rarely used, since it's expected to have a dedicated OEM partition for
+      OEM-specific properties. Only meaningful when -o is specified.
+
+  --stash_threshold <float>
+      Specify the threshold that will be used to compute the maximum allowed
+      stash size (defaults to 0.8).
+
+  -t  (--worker_threads) <int>
+      Specify the number of worker-threads that will be used when generating
+      patches for incremental updates (defaults to 3).
+
+  --verify
+      Verify the checksums of the updated system and vendor (if any) partitions.
+      Non-A/B incremental OTAs only.
+
   -2  (--two_step)
-      Generate a 'two-step' OTA package, where recovery is updated
-      first, so that any changes made to the system partition are done
-      using the new recovery (new kernel, etc.).
+      Generate a 'two-step' OTA package, where recovery is updated first, so
+      that any changes made to the system partition are done using the new
+      recovery (new kernel, etc.).
+
+A/B OTA specific options
 
   --include_secondary
       Additionally include the payload for secondary slot images (default:
@@ -115,30 +150,6 @@
       Due to the special install procedure, the secondary payload will be always
       generated as a full payload.
 
-  --block
-      Generate a block-based OTA for non-A/B device. We have deprecated the
-      support for file-based OTA since O. Block-based OTA will be used by
-      default for all non-A/B devices. Keeping this flag here to not break
-      existing callers.
-
-  -b  (--binary)  <file>
-      Use the given binary as the update-binary in the output package,
-      instead of the binary in the build's target_files.  Use for
-      development only.
-
-  -t  (--worker_threads) <int>
-      Specifies the number of worker-threads that will be used when
-      generating patches for incremental updates (defaults to 3).
-
-  --stash_threshold <float>
-      Specifies the threshold that will be used to compute the maximum
-      allowed stash size (defaults to 0.8).
-
-  --log_diff <file>
-      Generate a log file that shows the differences in the source and target
-      builds for an incremental package. This option is only meaningful when
-      -i is specified.
-
   --payload_signer <signer>
       Specify the signer when signing the payload and metadata for A/B OTAs.
       By default (i.e. without this flag), it calls 'openssl pkeyutl' to sign
@@ -160,23 +171,25 @@
 
 from __future__ import print_function
 
+import logging
 import multiprocessing
 import os.path
 import shlex
 import shutil
 import struct
-import subprocess
 import sys
 import tempfile
 import zipfile
 
 import common
 import edify_generator
+import verity_utils
 
 if sys.hexversion < 0x02070000:
   print("Python 2.7 or newer is required.", file=sys.stderr)
   sys.exit(1)
 
+logger = logging.getLogger(__name__)
 
 OPTIONS = common.OPTIONS
 OPTIONS.package_key = None
@@ -207,11 +220,14 @@
 OPTIONS.extracted_input = None
 OPTIONS.key_passwords = []
 OPTIONS.skip_postinstall = False
+OPTIONS.retrofit_dynamic_partitions = False
 
 
 METADATA_NAME = 'META-INF/com/android/metadata'
 POSTINSTALL_CONFIG = 'META/postinstall_config.txt'
+DYNAMIC_PARTITION_INFO = 'META/dynamic_partitions_info.txt'
 UNZIP_PATTERN = ['IMAGES/*', 'META/*']
+SUPER_SPLIT_PATTERN = ['OTA/super_*.img']
 
 
 class BuildInfo(object):
@@ -246,12 +262,14 @@
   def __init__(self, info_dict, oem_dicts):
     """Initializes a BuildInfo instance with the given dicts.
 
+    Note that it only wraps up the given dicts, without making copies.
+
     Arguments:
       info_dict: The build-time info dict.
       oem_dicts: A list of OEM dicts (which is parsed from --oem_settings). Note
           that it always uses the first dict to calculate the fingerprint or the
           device name. The rest would be used for asserting OEM properties only
-          (e.g.  one package can be installed on one of these devices).
+          (e.g. one package can be installed on one of these devices).
     """
     self.info_dict = info_dict
     self.oem_dicts = oem_dicts
@@ -279,15 +297,32 @@
     return self._fingerprint
 
   @property
+  def vendor_fingerprint(self):
+    if "vendor.build.prop" not in self.info_dict:
+      return None
+    vendor_build_prop = self.info_dict["vendor.build.prop"]
+    if "ro.vendor.build.fingerprint" in vendor_build_prop:
+      return vendor_build_prop["ro.vendor.build.fingerprint"]
+    if "ro.vendor.build.thumbprint" in vendor_build_prop:
+      return vendor_build_prop["ro.vendor.build.thumbprint"]
+    return None
+
+  @property
   def oem_props(self):
     return self._oem_props
 
   def __getitem__(self, key):
     return self.info_dict[key]
 
+  def __setitem__(self, key, value):
+    self.info_dict[key] = value
+
   def get(self, key, default=None):
     return self.info_dict.get(key, default)
 
+  def items(self):
+    return self.info_dict.items()
+
   def GetBuildProp(self, prop):
     """Returns the inquired build property."""
     try:
@@ -369,12 +404,7 @@
       cmd.extend(["-passin", "pass:" + pw] if pw else ["-nocrypt"])
       signing_key = common.MakeTempFile(prefix="key-", suffix=".key")
       cmd.extend(["-out", signing_key])
-
-      get_signing_key = common.Run(cmd, verbose=False, stdout=subprocess.PIPE,
-                                   stderr=subprocess.STDOUT)
-      stdoutdata, _ = get_signing_key.communicate()
-      assert get_signing_key.returncode == 0, \
-          "Failed to get signing key: {}".format(stdoutdata)
+      common.RunAndCheckOutput(cmd, verbose=False)
 
       self.signer = "openssl"
       self.signer_args = ["pkeyutl", "-sign", "-inkey", signing_key,
@@ -387,10 +417,7 @@
     """Signs the given input file. Returns the output filename."""
     out_file = common.MakeTempFile(prefix="signed-", suffix=".bin")
     cmd = [self.signer] + self.signer_args + ['-in', in_file, '-out', out_file]
-    signing = common.Run(cmd, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
-    stdoutdata, _ = signing.communicate()
-    assert signing.returncode == 0, \
-        "Failed to sign the input file: {}".format(stdoutdata)
+    common.RunAndCheckOutput(cmd)
     return out_file
 
 
@@ -408,8 +435,6 @@
     Args:
       secondary: Whether it's generating a secondary payload (default: False).
     """
-    # The place where the output from the subprocess should go.
-    self._log_file = sys.stdout if OPTIONS.verbose else subprocess.PIPE
     self.payload_file = None
     self.payload_properties = None
     self.secondary = secondary
@@ -434,10 +459,7 @@
     if source_file is not None:
       cmd.extend(["--source_image", source_file])
     cmd.extend(additional_args)
-    p = common.Run(cmd, stdout=self._log_file, stderr=subprocess.STDOUT)
-    stdoutdata, _ = p.communicate()
-    assert p.returncode == 0, \
-        "brillo_update_payload generate failed: {}".format(stdoutdata)
+    common.RunAndCheckOutput(cmd)
 
     self.payload_file = payload_file
     self.payload_properties = None
@@ -461,9 +483,7 @@
            "--signature_size", "256",
            "--metadata_hash_file", metadata_sig_file,
            "--payload_hash_file", payload_sig_file]
-    p1 = common.Run(cmd, stdout=self._log_file, stderr=subprocess.STDOUT)
-    p1.communicate()
-    assert p1.returncode == 0, "brillo_update_payload hash failed"
+    common.RunAndCheckOutput(cmd)
 
     # 2. Sign the hashes.
     signed_payload_sig_file = payload_signer.Sign(payload_sig_file)
@@ -478,9 +498,7 @@
            "--signature_size", "256",
            "--metadata_signature_file", signed_metadata_sig_file,
            "--payload_signature_file", signed_payload_sig_file]
-    p1 = common.Run(cmd, stdout=self._log_file, stderr=subprocess.STDOUT)
-    p1.communicate()
-    assert p1.returncode == 0, "brillo_update_payload sign failed"
+    common.RunAndCheckOutput(cmd)
 
     # 4. Dump the signed payload properties.
     properties_file = common.MakeTempFile(prefix="payload-properties-",
@@ -488,9 +506,7 @@
     cmd = ["brillo_update_payload", "properties",
            "--payload", signed_payload_file,
            "--properties_file", properties_file]
-    p1 = common.Run(cmd, stdout=self._log_file, stderr=subprocess.STDOUT)
-    p1.communicate()
-    assert p1.returncode == 0, "brillo_update_payload properties failed"
+    common.RunAndCheckOutput(cmd)
 
     if self.secondary:
       with open(properties_file, "a") as f:
@@ -572,11 +588,11 @@
         OPTIONS.input_tmp, "RECOVERY")
     common.ZipWriteStr(
         output_zip, recovery_two_step_img_name, recovery_two_step_img.data)
-    print("two-step package: using %s in stage 1/3" % (
-        recovery_two_step_img_name,))
+    logger.info(
+        "two-step package: using %s in stage 1/3", recovery_two_step_img_name)
     script.WriteRawImage("/boot", recovery_two_step_img_name)
   else:
-    print("two-step package: using recovery.img in stage 1/3")
+    logger.info("two-step package: using recovery.img in stage 1/3")
     # The "recovery.img" entry has been written into package earlier.
     script.WriteRawImage("/boot", "recovery.img")
 
@@ -685,26 +701,23 @@
   if not HasTrebleEnabled(target_zip, target_info):
     return
 
-  # We don't support OEM thumbprint in Treble world (which calculates
-  # fingerprints in a different way as shown in CalculateFingerprint()).
-  assert not target_info.oem_props
-
   # Full OTA carries the info for system/vendor both.
   if source_info is None:
     AddCompatibilityArchive(True, True)
     return
 
-  assert not source_info.oem_props
-
   source_fp = source_info.fingerprint
   target_fp = target_info.fingerprint
   system_updated = source_fp != target_fp
 
-  source_fp_vendor = source_info.GetVendorBuildProp(
-      "ro.vendor.build.fingerprint")
-  target_fp_vendor = target_info.GetVendorBuildProp(
-      "ro.vendor.build.fingerprint")
-  vendor_updated = source_fp_vendor != target_fp_vendor
+  source_fp_vendor = source_info.vendor_fingerprint
+  target_fp_vendor = target_info.vendor_fingerprint
+  # vendor build fingerprints could be possibly blacklisted at build time. For
+  # such a case, we consider the vendor images being changed.
+  if source_fp_vendor is None or target_fp_vendor is None:
+    vendor_updated = True
+  else:
+    vendor_updated = source_fp_vendor != target_fp_vendor
 
   AddCompatibilityArchive(system_updated, vendor_updated)
 
@@ -821,7 +834,8 @@
                                      allow_shared_blocks)
   system_tgt.ResetFileMap()
   system_diff = common.BlockDifference("system", system_tgt, src=None)
-  system_diff.WriteScript(script, output_zip)
+  system_diff.WriteScript(script, output_zip,
+                          write_verify_script=OPTIONS.verify)
 
   boot_img = common.GetBootableImage(
       "boot.img", "boot.img", OPTIONS.input_tmp, "BOOT")
@@ -833,7 +847,8 @@
                                        allow_shared_blocks)
     vendor_tgt.ResetFileMap()
     vendor_diff = common.BlockDifference("vendor", vendor_tgt)
-    vendor_diff.WriteScript(script, output_zip)
+    vendor_diff.WriteScript(script, output_zip,
+                            write_verify_script=OPTIONS.verify)
 
   AddCompatibilityArchiveIfTrebleEnabled(input_zip, output_zip, target_info)
 
@@ -1020,7 +1035,7 @@
       A string with placeholders for the metadata offset/size info, e.g.
       "payload.bin:679:343,payload_properties.txt:378:45,metadata:        ".
     """
-    return self._GetPropertyFilesString(input_zip, reserve_space=True)
+    return self.GetPropertyFilesString(input_zip, reserve_space=True)
 
   class InsufficientSpaceException(Exception):
     pass
@@ -1049,7 +1064,7 @@
       InsufficientSpaceException: If the reserved length is insufficient to hold
           the final string.
     """
-    result = self._GetPropertyFilesString(input_zip, reserve_space=False)
+    result = self.GetPropertyFilesString(input_zip, reserve_space=False)
     if len(result) > reserved_length:
       raise self.InsufficientSpaceException(
           'Insufficient reserved space: reserved={}, actual={}'.format(
@@ -1068,17 +1083,29 @@
     Raises:
       AssertionError: On finding a mismatch.
     """
-    actual = self._GetPropertyFilesString(input_zip)
+    actual = self.GetPropertyFilesString(input_zip)
     assert actual == expected, \
         "Mismatching streaming metadata: {} vs {}.".format(actual, expected)
 
-  def _GetPropertyFilesString(self, zip_file, reserve_space=False):
-    """Constructs the property-files string per request."""
+  def GetPropertyFilesString(self, zip_file, reserve_space=False):
+    """
+    Constructs the property-files string per request.
+
+    Args:
+      zip_file: The input ZIP file.
+      reserved_length: The reserved length of the property-files string.
+
+    Returns:
+      A property-files string including the metadata offset/size info, e.g.
+      "payload.bin:679:343,payload_properties.txt:378:45,metadata:     ".
+    """
 
     def ComputeEntryOffsetSize(name):
       """Computes the zip entry offset and size."""
       info = zip_file.getinfo(name)
-      offset = info.header_offset + len(info.FileHeader())
+      offset = info.header_offset
+      offset += zipfile.sizeFileHeader
+      offset += len(info.extra) + len(info.filename)
       size = info.file_size
       return '%s:%d:%d' % (os.path.basename(name), offset, size)
 
@@ -1133,7 +1160,8 @@
         'payload_properties.txt',
     )
     self.optional = (
-        # care_map.txt is available only if dm-verity is enabled.
+        # care_map is available only if dm-verity is enabled.
+        'care_map.pb',
         'care_map.txt',
         # compatibility.zip is available only if target supports Treble.
         'compatibility.zip',
@@ -1202,7 +1230,9 @@
     payload, till the end of 'medatada_signature_message'.
     """
     payload_info = input_zip.getinfo('payload.bin')
-    payload_offset = payload_info.header_offset + len(payload_info.FileHeader())
+    payload_offset = payload_info.header_offset
+    payload_offset += zipfile.sizeFileHeader
+    payload_offset += len(payload_info.extra) + len(payload_info.filename)
     payload_size = payload_info.file_size
 
     with input_zip.open('payload.bin', 'r') as payload_fp:
@@ -1326,8 +1356,8 @@
   target_api_version = target_info["recovery_api_version"]
   source_api_version = source_info["recovery_api_version"]
   if source_api_version == 0:
-    print("WARNING: generating edify script for a source that "
-          "can't install it.")
+    logger.warning(
+        "Generating edify script for a source that can't install it.")
 
   script = edify_generator.EdifyGenerator(
       source_api_version, target_info, fstab=source_info["fstab"])
@@ -1374,8 +1404,12 @@
                          target_info.get('ext4_share_dup_blocks') == "true")
   system_src = common.GetSparseImage("system", OPTIONS.source_tmp, source_zip,
                                      allow_shared_blocks)
+
+  hashtree_info_generator = verity_utils.CreateHashtreeInfoGenerator(
+      "system", 4096, target_info)
   system_tgt = common.GetSparseImage("system", OPTIONS.target_tmp, target_zip,
-                                     allow_shared_blocks)
+                                     allow_shared_blocks,
+                                     hashtree_info_generator)
 
   blockimgdiff_version = max(
       int(i) for i in target_info.get("blockimgdiff_versions", "1").split(","))
@@ -1402,8 +1436,11 @@
       raise RuntimeError("can't generate incremental that adds /vendor")
     vendor_src = common.GetSparseImage("vendor", OPTIONS.source_tmp, source_zip,
                                        allow_shared_blocks)
-    vendor_tgt = common.GetSparseImage("vendor", OPTIONS.target_tmp, target_zip,
-                                       allow_shared_blocks)
+    hashtree_info_generator = verity_utils.CreateHashtreeInfoGenerator(
+        "vendor", 4096, target_info)
+    vendor_tgt = common.GetSparseImage(
+        "vendor", OPTIONS.target_tmp, target_zip, allow_shared_blocks,
+        hashtree_info_generator)
 
     # Check first block of vendor partition for remount R/W only if
     # disk type is ext4
@@ -1498,15 +1535,18 @@
     else:
       include_full_boot = False
 
-      print("boot      target: %d  source: %d  diff: %d" % (
-          target_boot.size, source_boot.size, len(d)))
+      logger.info(
+          "boot      target: %d  source: %d  diff: %d", target_boot.size,
+          source_boot.size, len(d))
 
-      common.ZipWriteStr(output_zip, "patch/boot.img.p", d)
+      common.ZipWriteStr(output_zip, "boot.img.p", d)
 
-      script.PatchCheck("%s:%s:%d:%s:%d:%s" %
-                        (boot_type, boot_device,
-                         source_boot.size, source_boot.sha1,
-                         target_boot.size, target_boot.sha1))
+      script.PatchPartitionCheck(
+          "{}:{}:{}:{}".format(
+              boot_type, boot_device, target_boot.size, target_boot.sha1),
+          "{}:{}:{}:{}".format(
+              boot_type, boot_device, source_boot.size, source_boot.sha1))
+
       size.append(target_boot.size)
 
   if size:
@@ -1537,38 +1577,39 @@
   device_specific.IncrementalOTA_InstallBegin()
 
   system_diff.WriteScript(script, output_zip,
-                          progress=0.8 if vendor_diff else 0.9)
+                          progress=0.8 if vendor_diff else 0.9,
+                          write_verify_script=OPTIONS.verify)
 
   if vendor_diff:
-    vendor_diff.WriteScript(script, output_zip, progress=0.1)
+    vendor_diff.WriteScript(script, output_zip, progress=0.1,
+                            write_verify_script=OPTIONS.verify)
 
   if OPTIONS.two_step:
     common.ZipWriteStr(output_zip, "boot.img", target_boot.data)
     script.WriteRawImage("/boot", "boot.img")
-    print("writing full boot image (forced by two-step mode)")
+    logger.info("writing full boot image (forced by two-step mode)")
 
   if not OPTIONS.two_step:
     if updating_boot:
       if include_full_boot:
-        print("boot image changed; including full.")
+        logger.info("boot image changed; including full.")
         script.Print("Installing boot image...")
         script.WriteRawImage("/boot", "boot.img")
       else:
         # Produce the boot image by applying a patch to the current
         # contents of the boot partition, and write it back to the
         # partition.
-        print("boot image changed; including patch.")
+        logger.info("boot image changed; including patch.")
         script.Print("Patching boot image...")
         script.ShowProgress(0.1, 10)
-        script.ApplyPatch("%s:%s:%d:%s:%d:%s"
-                          % (boot_type, boot_device,
-                             source_boot.size, source_boot.sha1,
-                             target_boot.size, target_boot.sha1),
-                          "-",
-                          target_boot.size, target_boot.sha1,
-                          source_boot.sha1, "patch/boot.img.p")
+        script.PatchPartition(
+            '{}:{}:{}:{}'.format(
+                boot_type, boot_device, target_boot.size, target_boot.sha1),
+            '{}:{}:{}:{}'.format(
+                boot_type, boot_device, source_boot.size, source_boot.sha1),
+            'boot.img.p')
     else:
-      print("boot image unchanged; skipping.")
+      logger.info("boot image unchanged; skipping.")
 
   # Do device-specific installation (eg, write radio image).
   device_specific.IncrementalOTA_InstallEnd()
@@ -1629,9 +1670,15 @@
   target_file = common.MakeTempFile(prefix="targetfiles-", suffix=".zip")
   target_zip = zipfile.ZipFile(target_file, 'w', allowZip64=True)
 
-  input_tmp = common.UnzipTemp(input_file, UNZIP_PATTERN)
   with zipfile.ZipFile(input_file, 'r') as input_zip:
     infolist = input_zip.infolist()
+    namelist = input_zip.namelist()
+
+  # Additionally unzip 'RADIO/*' if exists.
+  unzip_pattern = UNZIP_PATTERN[:]
+  if any([entry.startswith('RADIO/') for entry in namelist]):
+    unzip_pattern.append('RADIO/*')
+  input_tmp = common.UnzipTemp(input_file, unzip_pattern)
 
   for info in infolist:
     unzipped_file = os.path.join(input_tmp, *info.filename.split('/'))
@@ -1647,7 +1694,7 @@
     elif skip_postinstall and info.filename == POSTINSTALL_CONFIG:
       pass
 
-    elif info.filename.startswith(('META/', 'IMAGES/')):
+    elif info.filename.startswith(('META/', 'IMAGES/', 'RADIO/')):
       common.ZipWrite(target_zip, unzipped_file, arcname=info.filename)
 
   common.ZipClose(target_zip)
@@ -1680,6 +1727,60 @@
   return target_file
 
 
+def GetTargetFilesZipForRetrofitDynamicPartitions(input_file,
+                                                  super_block_devices):
+  """Returns a target-files.zip for retrofitting dynamic partitions.
+
+  This allows brillo_update_payload to generate an OTA based on the exact
+  bits on the block devices. Postinstall is disabled.
+
+  Args:
+    input_file: The input target-files.zip filename.
+    super_block_devices: The list of super block devices
+
+  Returns:
+    The filename of target-files.zip with *.img replaced with super_*.img for
+    each block device in super_block_devices.
+  """
+  assert super_block_devices, "No super_block_devices are specified."
+
+  replace = {'OTA/super_{}.img'.format(dev): 'IMAGES/{}.img'.format(dev)
+             for dev in super_block_devices}
+
+  target_file = common.MakeTempFile(prefix="targetfiles-", suffix=".zip")
+  shutil.copyfile(input_file, target_file)
+
+  with zipfile.ZipFile(input_file, 'r') as input_zip:
+    namelist = input_zip.namelist()
+
+  # Always skip postinstall for a retrofit update.
+  to_delete = [POSTINSTALL_CONFIG]
+
+  # Delete dynamic_partitions_info.txt so that brillo_update_payload thinks this
+  # is a regular update on devices without dynamic partitions support.
+  to_delete += [DYNAMIC_PARTITION_INFO]
+
+  # Remove the existing partition images as well as the map files.
+  to_delete += replace.values()
+  to_delete += ['IMAGES/{}.map'.format(dev) for dev in super_block_devices]
+
+  common.ZipDelete(target_file, to_delete)
+
+  input_tmp = common.UnzipTemp(input_file, SUPER_SPLIT_PATTERN)
+  target_zip = zipfile.ZipFile(target_file, 'a', allowZip64=True)
+
+  # Write super_{foo}.img as {foo}.img.
+  for src, dst in replace.items():
+    assert src in namelist, \
+          'Missing {} in {}; {} cannot be written'.format(src, input_file, dst)
+    unzipped_file = os.path.join(input_tmp, *src.split('/'))
+    common.ZipWrite(target_zip, unzipped_file, arcname=dst)
+
+  common.ZipClose(target_zip)
+
+  return target_file
+
+
 def WriteABOTAPackageWithBrilloScript(target_file, output_file,
                                       source_file=None):
   """Generates an Android OTA package that has A/B update payload."""
@@ -1701,7 +1802,10 @@
   # Metadata to comply with Android OTA package format.
   metadata = GetPackageMetadata(target_info, source_info)
 
-  if OPTIONS.skip_postinstall:
+  if OPTIONS.retrofit_dynamic_partitions:
+    target_file = GetTargetFilesZipForRetrofitDynamicPartitions(
+        target_file, target_info.get("super_block_devices").strip().split())
+  elif OPTIONS.skip_postinstall:
     target_file = GetTargetFilesZipWithoutPostinstallConfig(target_file)
 
   # Generate payload.
@@ -1741,16 +1845,19 @@
   target_zip = zipfile.ZipFile(target_file, "r")
   if (target_info.get("verity") == "true" or
       target_info.get("avb_enable") == "true"):
-    care_map_path = "META/care_map.txt"
-    namelist = target_zip.namelist()
-    if care_map_path in namelist:
-      care_map_data = target_zip.read(care_map_path)
-      # In order to support streaming, care_map.txt needs to be packed as
+    care_map_list = [x for x in ["care_map.pb", "care_map.txt"] if
+                     "META/" + x in target_zip.namelist()]
+
+    # Adds care_map if either the protobuf format or the plain text one exists.
+    if care_map_list:
+      care_map_name = care_map_list[0]
+      care_map_data = target_zip.read("META/" + care_map_name)
+      # In order to support streaming, care_map needs to be packed as
       # ZIP_STORED.
-      common.ZipWriteStr(output_zip, "care_map.txt", care_map_data,
+      common.ZipWriteStr(output_zip, care_map_name, care_map_data,
                          compress_type=zipfile.ZIP_STORED)
     else:
-      print("Warning: cannot find care map file in target_file package")
+      logger.warning("Cannot find care map file in target_file package")
 
   AddCompatibilityArchiveIfTrebleEnabled(
       target_zip, output_zip, target_info, source_info)
@@ -1830,6 +1937,8 @@
       OPTIONS.extracted_input = a
     elif o == "--skip_postinstall":
       OPTIONS.skip_postinstall = True
+    elif o == "--retrofit_dynamic_partitions":
+      OPTIONS.retrofit_dynamic_partitions = True
     else:
       return False
     return True
@@ -1860,12 +1969,15 @@
                                  "payload_signer_args=",
                                  "extracted_input_target_files=",
                                  "skip_postinstall",
+                                 "retrofit_dynamic_partitions",
                              ], extra_option_handler=option_handler)
 
   if len(args) != 2:
     common.Usage(__doc__)
     sys.exit(1)
 
+  common.InitLogging()
+
   if OPTIONS.downgrade:
     # We should only allow downgrading incrementals (as opposed to full).
     # Otherwise the device may go back from arbitrary build with this full
@@ -1886,9 +1998,8 @@
     with zipfile.ZipFile(args[0], 'r') as input_zip:
       OPTIONS.info_dict = common.LoadInfoDict(input_zip)
 
-  if OPTIONS.verbose:
-    print("--- target info ---")
-    common.DumpInfoDict(OPTIONS.info_dict)
+  logger.info("--- target info ---")
+  common.DumpInfoDict(OPTIONS.info_dict)
 
   # Load the source build dict if applicable.
   if OPTIONS.incremental_source is not None:
@@ -1896,13 +2007,29 @@
     with zipfile.ZipFile(OPTIONS.incremental_source, 'r') as source_zip:
       OPTIONS.source_info_dict = common.LoadInfoDict(source_zip)
 
-    if OPTIONS.verbose:
-      print("--- source info ---")
-      common.DumpInfoDict(OPTIONS.source_info_dict)
+    logger.info("--- source info ---")
+    common.DumpInfoDict(OPTIONS.source_info_dict)
 
   # Load OEM dicts if provided.
   OPTIONS.oem_dicts = _LoadOemDicts(OPTIONS.oem_source)
 
+  # Assume retrofitting dynamic partitions when base build does not set
+  # use_dynamic_partitions but target build does.
+  if (OPTIONS.source_info_dict and
+      OPTIONS.source_info_dict.get("use_dynamic_partitions") != "true" and
+      OPTIONS.target_info_dict.get("use_dynamic_partitions") == "true"):
+    if OPTIONS.target_info_dict.get("dynamic_partition_retrofit") != "true":
+      raise common.ExternalError(
+          "Expect to generate incremental OTA for retrofitting dynamic "
+          "partitions, but dynamic_partition_retrofit is not set in target "
+          "build.")
+    logger.info("Implicitly generating retrofit incremental OTA.")
+    OPTIONS.retrofit_dynamic_partitions = True
+
+  # Skip postinstall for retrofitting dynamic partitions.
+  if OPTIONS.retrofit_dynamic_partitions:
+    OPTIONS.skip_postinstall = True
+
   ab_update = OPTIONS.info_dict.get("ab_update") == "true"
 
   # Use the default key to sign the package if not specified with package_key.
@@ -1922,7 +2049,7 @@
         output_file=args[1],
         source_file=OPTIONS.incremental_source)
 
-    print("done.")
+    logger.info("done.")
     return
 
   # Sanity check the loaded info dicts first.
@@ -1933,7 +2060,7 @@
   # Non-A/B OTAs rely on /cache partition to store temporary files.
   cache_size = OPTIONS.info_dict.get("cache_size")
   if cache_size is None:
-    print("--- can't determine the cache partition size ---")
+    logger.warning("--- can't determine the cache partition size ---")
   OPTIONS.cache_size = cache_size
 
   if OPTIONS.extra_script is not None:
@@ -1942,7 +2069,7 @@
   if OPTIONS.extracted_input is not None:
     OPTIONS.input_tmp = OPTIONS.extracted_input
   else:
-    print("unzipping target target-files...")
+    logger.info("unzipping target target-files...")
     OPTIONS.input_tmp = common.UnzipTemp(args[0], UNZIP_PATTERN)
   OPTIONS.target_tmp = OPTIONS.input_tmp
 
@@ -1954,7 +2081,7 @@
   if OPTIONS.device_specific is None:
     from_input = os.path.join(OPTIONS.input_tmp, "META", "releasetools.py")
     if os.path.exists(from_input):
-      print("(using device-specific extensions from target_files)")
+      logger.info("(using device-specific extensions from target_files)")
       OPTIONS.device_specific = from_input
     else:
       OPTIONS.device_specific = OPTIONS.info_dict.get("tool_extensions")
@@ -1971,7 +2098,7 @@
 
   # Generate an incremental OTA.
   else:
-    print("unzipping source target-files...")
+    logger.info("unzipping source target-files...")
     OPTIONS.source_tmp = common.UnzipTemp(
         OPTIONS.incremental_source, UNZIP_PATTERN)
     with zipfile.ZipFile(args[0], 'r') as input_zip, \
@@ -1987,15 +2114,15 @@
         target_files_diff.recursiveDiff(
             '', OPTIONS.source_tmp, OPTIONS.input_tmp, out_file)
 
-  print("done.")
+  logger.info("done.")
 
 
 if __name__ == '__main__':
   try:
     common.CloseInheritedPipes()
     main(sys.argv[1:])
-  except common.ExternalError as e:
-    print("\n   ERROR: %s\n" % (e,))
+  except common.ExternalError:
+    logger.exception("\n   ERROR:\n")
     sys.exit(1)
   finally:
     common.Cleanup()
diff --git a/tools/releasetools/pylintrc b/tools/releasetools/pylintrc
index 7b3405c..2a30742 100644
--- a/tools/releasetools/pylintrc
+++ b/tools/releasetools/pylintrc
@@ -62,7 +62,7 @@
 # --enable=similarities". If you want to run only the classes checker, but have
 # no Warning level messages displayed, use"--disable=all --enable=classes
 # --disable=W"
-disable=invalid-name,missing-docstring,too-many-branches,too-many-locals,too-many-arguments,too-many-statements,duplicate-code,too-few-public-methods,too-many-instance-attributes,too-many-lines,too-many-public-methods,locally-disabled,fixme
+disable=invalid-name,missing-docstring,too-many-branches,too-many-locals,too-many-arguments,too-many-statements,duplicate-code,too-few-public-methods,too-many-instance-attributes,too-many-lines,too-many-public-methods,locally-disabled,fixme,not-callable
 
 
 [REPORTS]
diff --git a/tools/releasetools/sign_target_files_apks.py b/tools/releasetools/sign_target_files_apks.py
index fa62c8f..de3ead6 100755
--- a/tools/releasetools/sign_target_files_apks.py
+++ b/tools/releasetools/sign_target_files_apks.py
@@ -27,6 +27,12 @@
       in the apkcerts.txt file.  Option may be repeated to give
       multiple extra packages.
 
+  --skip_apks_with_path_prefix  <prefix>
+      Skip signing an APK if it has the matching prefix in its path. The prefix
+      should be matching the entry name, which has partition names in upper
+      case, e.g. "VENDOR/app/", or "SYSTEM_OTHER/preloads/". Option may be
+      repeated to give multiple prefixes.
+
   -k  (--key_mapping)  <src_key=dest_key>
       Add a mapping from the key name as specified in apkcerts.txt (the
       src_key) to the real key you wish to sign the package with
@@ -118,6 +124,7 @@
 OPTIONS = common.OPTIONS
 
 OPTIONS.extra_apks = {}
+OPTIONS.skip_apks_with_path_prefix = set()
 OPTIONS.key_map = {}
 OPTIONS.rebuild_recovery = False
 OPTIONS.replace_ota_keys = False
@@ -144,28 +151,83 @@
   return certmap
 
 
+def GetApkFileInfo(filename, compressed_extension, skipped_prefixes):
+  """Returns the APK info based on the given filename.
+
+  Checks if the given filename (with path) looks like an APK file, by taking the
+  compressed extension into consideration. If it appears to be an APK file,
+  further checks if the APK file should be skipped when signing, based on the
+  given path prefixes.
+
+  Args:
+    filename: Path to the file.
+    compressed_extension: The extension string of compressed APKs (e.g. ".gz"),
+        or None if there's no compressed APKs.
+    skipped_prefixes: A set/list/tuple of the path prefixes to be skipped.
+
+  Returns:
+    (is_apk, is_compressed, should_be_skipped): is_apk indicates whether the
+    given filename is an APK file. is_compressed indicates whether the APK file
+    is compressed (only meaningful when is_apk is True). should_be_skipped
+    indicates whether the filename matches any of the given prefixes to be
+    skipped.
+
+  Raises:
+    AssertionError: On invalid compressed_extension or skipped_prefixes inputs.
+  """
+  assert compressed_extension is None or compressed_extension.startswith('.'), \
+      "Invalid compressed_extension arg: '{}'".format(compressed_extension)
+
+  # skipped_prefixes should be one of set/list/tuple types. Other types such as
+  # str shouldn't be accepted.
+  assert (isinstance(skipped_prefixes, tuple) or
+          isinstance(skipped_prefixes, set) or
+          isinstance(skipped_prefixes, list)), \
+              "Invalid skipped_prefixes input type: {}".format(
+                  type(skipped_prefixes))
+
+  compressed_apk_extension = (
+      ".apk" + compressed_extension if compressed_extension else None)
+  is_apk = (filename.endswith(".apk") or
+            (compressed_apk_extension and
+             filename.endswith(compressed_apk_extension)))
+  if not is_apk:
+    return (False, False, False)
+
+  is_compressed = (compressed_apk_extension and
+                   filename.endswith(compressed_apk_extension))
+  should_be_skipped = filename.startswith(tuple(skipped_prefixes))
+  return (True, is_compressed, should_be_skipped)
+
+
 def CheckAllApksSigned(input_tf_zip, apk_key_map, compressed_extension):
-  """Check that all the APKs we want to sign have keys specified, and
-  error out if they don't."""
+  """Checks that all the APKs have keys specified, otherwise errors out.
+
+  Args:
+    input_tf_zip: An open target_files zip file.
+    apk_key_map: A dict of known signing keys key'd by APK names.
+    compressed_extension: The extension string of compressed APKs, such as
+        ".gz", or None if there's no compressed APKs.
+
+  Raises:
+    AssertionError: On finding unknown APKs.
+  """
   unknown_apks = []
-  compressed_apk_extension = None
-  if compressed_extension:
-    compressed_apk_extension = ".apk" + compressed_extension
   for info in input_tf_zip.infolist():
-    if (info.filename.endswith(".apk") or
-        (compressed_apk_extension and
-         info.filename.endswith(compressed_apk_extension))):
-      name = os.path.basename(info.filename)
-      if compressed_apk_extension and name.endswith(compressed_apk_extension):
-        name = name[:-len(compressed_extension)]
-      if name not in apk_key_map:
-        unknown_apks.append(name)
-  if unknown_apks:
-    print("ERROR: no key specified for:\n")
-    print("  " + "\n  ".join(unknown_apks))
-    print("\nUse '-e <apkname>=' to specify a key (which may be an empty "
-          "string to not sign this apk).")
-    sys.exit(1)
+    (is_apk, is_compressed, should_be_skipped) = GetApkFileInfo(
+        info.filename, compressed_extension, OPTIONS.skip_apks_with_path_prefix)
+    if not is_apk or should_be_skipped:
+      continue
+    name = os.path.basename(info.filename)
+    if is_compressed:
+      name = name[:-len(compressed_extension)]
+    if name not in apk_key_map:
+      unknown_apks.append(name)
+
+  assert not unknown_apks, \
+      ("No key specified for:\n  {}\n"
+       "Use '-e <apkname>=' to specify a key (which may be an empty string to "
+       "not sign this apk).".format("\n  ".join(unknown_apks)))
 
 
 def SignApk(data, keyname, pw, platform_api_level, codename_to_api_level_map,
@@ -235,32 +297,33 @@
                        apk_key_map, key_passwords, platform_api_level,
                        codename_to_api_level_map,
                        compressed_extension):
-
-  compressed_apk_extension = None
-  if compressed_extension:
-    compressed_apk_extension = ".apk" + compressed_extension
-
+  # maxsize measures the maximum filename length, including the ones to be
+  # skipped.
   maxsize = max(
       [len(os.path.basename(i.filename)) for i in input_tf_zip.infolist()
-       if (i.filename.endswith('.apk') or
-           (compressed_apk_extension and
-            i.filename.endswith(compressed_apk_extension)))])
+       if GetApkFileInfo(i.filename, compressed_extension, [])[0]])
   system_root_image = misc_info.get("system_root_image") == "true"
 
   for info in input_tf_zip.infolist():
-    if info.filename.startswith("IMAGES/"):
+    filename = info.filename
+    if filename.startswith("IMAGES/"):
       continue
 
-    data = input_tf_zip.read(info.filename)
+    data = input_tf_zip.read(filename)
     out_info = copy.copy(info)
+    (is_apk, is_compressed, should_be_skipped) = GetApkFileInfo(
+        filename, compressed_extension, OPTIONS.skip_apks_with_path_prefix)
+
+    if is_apk and should_be_skipped:
+      # Copy skipped APKs verbatim.
+      print(
+          "NOT signing: %s\n"
+          "        (skipped due to matching prefix)" % (filename,))
+      common.ZipWriteStr(output_tf_zip, out_info, data)
 
     # Sign APKs.
-    if (info.filename.endswith(".apk") or
-        (compressed_apk_extension and
-         info.filename.endswith(compressed_apk_extension))):
-      is_compressed = (compressed_extension and
-                       info.filename.endswith(compressed_apk_extension))
-      name = os.path.basename(info.filename)
+    elif is_apk:
+      name = os.path.basename(filename)
       if is_compressed:
         name = name[:-len(compressed_extension)]
 
@@ -272,19 +335,21 @@
         common.ZipWriteStr(output_tf_zip, out_info, signed_data)
       else:
         # an APK we're not supposed to sign.
-        print("NOT signing: %s" % (name,))
+        print(
+            "NOT signing: %s\n"
+            "        (skipped due to special cert string)" % (name,))
         common.ZipWriteStr(output_tf_zip, out_info, data)
 
     # System properties.
-    elif info.filename in ("SYSTEM/build.prop",
-                           "VENDOR/build.prop",
-                           "SYSTEM/etc/prop.default",
-                           "BOOT/RAMDISK/prop.default",
-                           "BOOT/RAMDISK/default.prop",  # legacy
-                           "ROOT/default.prop",  # legacy
-                           "RECOVERY/RAMDISK/prop.default",
-                           "RECOVERY/RAMDISK/default.prop"):  # legacy
-      print("Rewriting %s:" % (info.filename,))
+    elif filename in ("SYSTEM/build.prop",
+                      "VENDOR/build.prop",
+                      "SYSTEM/etc/prop.default",
+                      "BOOT/RAMDISK/prop.default",
+                      "BOOT/RAMDISK/default.prop",  # legacy
+                      "ROOT/default.prop",  # legacy
+                      "RECOVERY/RAMDISK/prop.default",
+                      "RECOVERY/RAMDISK/default.prop"):  # legacy
+      print("Rewriting %s:" % (filename,))
       if stat.S_ISLNK(info.external_attr >> 16):
         new_data = data
       else:
@@ -293,44 +358,44 @@
 
     # Replace the certs in *mac_permissions.xml (there could be multiple, such
     # as {system,vendor}/etc/selinux/{plat,nonplat}_mac_permissions.xml).
-    elif info.filename.endswith("mac_permissions.xml"):
-      print("Rewriting %s with new keys." % (info.filename,))
+    elif filename.endswith("mac_permissions.xml"):
+      print("Rewriting %s with new keys." % (filename,))
       new_data = ReplaceCerts(data)
       common.ZipWriteStr(output_tf_zip, out_info, new_data)
 
     # Ask add_img_to_target_files to rebuild the recovery patch if needed.
-    elif info.filename in ("SYSTEM/recovery-from-boot.p",
-                           "SYSTEM/etc/recovery.img",
-                           "SYSTEM/bin/install-recovery.sh"):
+    elif filename in ("SYSTEM/recovery-from-boot.p",
+                      "SYSTEM/etc/recovery.img",
+                      "SYSTEM/bin/install-recovery.sh"):
       OPTIONS.rebuild_recovery = True
 
-    # Don't copy OTA keys if we're replacing them.
-    elif (OPTIONS.replace_ota_keys and
-          info.filename in (
-              "BOOT/RAMDISK/res/keys",
-              "BOOT/RAMDISK/etc/update_engine/update-payload-key.pub.pem",
-              "RECOVERY/RAMDISK/res/keys",
-              "SYSTEM/etc/security/otacerts.zip",
-              "SYSTEM/etc/update_engine/update-payload-key.pub.pem")):
+    # Don't copy OTA certs if we're replacing them.
+    elif (
+        OPTIONS.replace_ota_keys and
+        filename in (
+            "BOOT/RAMDISK/system/etc/security/otacerts.zip",
+            "BOOT/RAMDISK/system/etc/update_engine/update-payload-key.pub.pem",
+            "RECOVERY/RAMDISK/system/etc/security/otacerts.zip",
+            "SYSTEM/etc/security/otacerts.zip",
+            "SYSTEM/etc/update_engine/update-payload-key.pub.pem")):
       pass
 
     # Skip META/misc_info.txt since we will write back the new values later.
-    elif info.filename == "META/misc_info.txt":
+    elif filename == "META/misc_info.txt":
       pass
 
     # Skip verity public key if we will replace it.
     elif (OPTIONS.replace_verity_public_key and
-          info.filename in ("BOOT/RAMDISK/verity_key",
-                            "ROOT/verity_key")):
+          filename in ("BOOT/RAMDISK/verity_key",
+                       "ROOT/verity_key")):
       pass
 
     # Skip verity keyid (for system_root_image use) if we will replace it.
-    elif (OPTIONS.replace_verity_keyid and
-          info.filename == "BOOT/cmdline"):
+    elif OPTIONS.replace_verity_keyid and filename == "BOOT/cmdline":
       pass
 
     # Skip the care_map as we will regenerate the system/vendor images.
-    elif info.filename == "META/care_map.txt":
+    elif filename == "META/care_map.pb" or filename == "META/care_map.txt":
       pass
 
     # A non-APK file; copy it verbatim.
@@ -483,6 +548,27 @@
   return "\n".join(output) + "\n"
 
 
+def WriteOtacerts(output_zip, filename, keys):
+  """Constructs a zipfile from given keys; and writes it to output_zip.
+
+  Args:
+    output_zip: The output target_files zip.
+    filename: The archive name in the output zip.
+    keys: A list of public keys to use during OTA package verification.
+  """
+
+  try:
+    from StringIO import StringIO
+  except ImportError:
+    from io import StringIO
+  temp_file = StringIO()
+  certs_zip = zipfile.ZipFile(temp_file, "w")
+  for k in keys:
+    common.ZipWrite(certs_zip, k)
+  common.ZipClose(certs_zip)
+  common.ZipWriteStr(output_zip, filename, temp_file.getvalue())
+
+
 def ReplaceOtaKeys(input_tf_zip, output_tf_zip, misc_info):
   try:
     keylist = input_tf_zip.read("META/otakeys.txt").split()
@@ -520,40 +606,20 @@
     print("META/otakeys.txt has no keys; using %s for OTA package"
           " verification." % (mapped_keys[0],))
 
-  # recovery uses a version of the key that has been slightly
-  # predigested (by DumpPublicKey.java) and put in res/keys.
+  # recovery now uses the same x509.pem version of the keys.
   # extra_recovery_keys are used only in recovery.
-  cmd = ([OPTIONS.java_path] + OPTIONS.java_args +
-         ["-jar",
-          os.path.join(OPTIONS.search_path, "framework", "dumpkey.jar")] +
-         mapped_keys + extra_recovery_keys)
-  p = common.Run(cmd, stdout=subprocess.PIPE)
-  new_recovery_keys, _ = p.communicate()
-  if p.returncode != 0:
-    raise common.ExternalError("failed to run dumpkeys")
-
-  # system_root_image puts the recovery keys at BOOT/RAMDISK.
-  if misc_info.get("system_root_image") == "true":
-    recovery_keys_location = "BOOT/RAMDISK/res/keys"
+  if misc_info.get("recovery_as_boot") == "true":
+    recovery_keys_location = "BOOT/RAMDISK/system/etc/security/otacerts.zip"
   else:
-    recovery_keys_location = "RECOVERY/RAMDISK/res/keys"
-  common.ZipWriteStr(output_tf_zip, recovery_keys_location, new_recovery_keys)
+    recovery_keys_location = "RECOVERY/RAMDISK/system/etc/security/otacerts.zip"
+
+  WriteOtacerts(output_tf_zip, recovery_keys_location,
+                mapped_keys + extra_recovery_keys)
 
   # SystemUpdateActivity uses the x509.pem version of the keys, but
   # put into a zipfile system/etc/security/otacerts.zip.
   # We DO NOT include the extra_recovery_keys (if any) here.
-
-  try:
-    from StringIO import StringIO
-  except ImportError:
-    from io import StringIO
-  temp_file = StringIO()
-  certs_zip = zipfile.ZipFile(temp_file, "w")
-  for k in mapped_keys:
-    common.ZipWrite(certs_zip, k)
-  common.ZipClose(certs_zip)
-  common.ZipWriteStr(output_tf_zip, "SYSTEM/etc/security/otacerts.zip",
-                     temp_file.getvalue())
+  WriteOtacerts(output_tf_zip, "SYSTEM/etc/security/otacerts.zip", mapped_keys)
 
   # For A/B devices, update the payload verification key.
   if misc_info.get("ab_update") == "true":
@@ -571,11 +637,9 @@
         pubkey)
     common.ZipWriteStr(
         output_tf_zip,
-        "BOOT/RAMDISK/etc/update_engine/update-payload-key.pub.pem",
+        "BOOT/RAMDISK/system/etc/update_engine/update-payload-key.pub.pem",
         pubkey)
 
-  return new_recovery_keys
-
 
 def ReplaceVerityPublicKey(output_zip, filename, key_path):
   """Replaces the verity public key at the given path in the given zip.
@@ -763,6 +827,12 @@
       names = names.split(",")
       for n in names:
         OPTIONS.extra_apks[n] = key
+    elif o == "--skip_apks_with_path_prefix":
+      # Sanity check the prefix, which must be in all upper case.
+      prefix = a.split('/')[0]
+      if not prefix or prefix != prefix.upper():
+        raise ValueError("Invalid path prefix '%s'" % (a,))
+      OPTIONS.skip_apks_with_path_prefix.add(a)
     elif o in ("-d", "--default_key_mappings"):
       key_mapping_options.append((None, a))
     elif o in ("-k", "--key_mapping"):
@@ -822,6 +892,7 @@
       extra_opts="e:d:k:ot:",
       extra_long_opts=[
           "extra_apks=",
+          "skip_apks_with_path_prefix=",
           "default_key_mappings=",
           "key_mapping=",
           "replace_ota_keys",
diff --git a/tools/releasetools/sparse_img.py b/tools/releasetools/sparse_img.py
index 083da7a..7919ba4 100644
--- a/tools/releasetools/sparse_img.py
+++ b/tools/releasetools/sparse_img.py
@@ -13,6 +13,7 @@
 # limitations under the License.
 
 import bisect
+import logging
 import os
 import struct
 import threading
@@ -20,6 +21,8 @@
 
 import rangelib
 
+logger = logging.getLogger(__name__)
+
 
 class SparseImage(object):
   """Wraps a sparse image file into an image object.
@@ -33,7 +36,8 @@
   """
 
   def __init__(self, simg_fn, file_map_fn=None, clobbered_blocks=None,
-               mode="rb", build_map=True, allow_shared_blocks=False):
+               mode="rb", build_map=True, allow_shared_blocks=False,
+               hashtree_info_generator=None):
     self.simg_f = f = open(simg_fn, mode)
 
     header_bin = f.read(28)
@@ -60,10 +64,13 @@
       raise ValueError("Chunk header size was expected to be 12, but is %u." %
                        (chunk_hdr_sz,))
 
-    print("Total of %u %u-byte output blocks in %u input chunks."
-          % (total_blks, blk_sz, total_chunks))
+    logger.info(
+        "Total of %u %u-byte output blocks in %u input chunks.", total_blks,
+        blk_sz, total_chunks)
 
     if not build_map:
+      assert not hashtree_info_generator, \
+        "Cannot generate the hashtree info without building the offset map."
       return
 
     pos = 0   # in blocks
@@ -102,8 +109,18 @@
         if data_sz != 0:
           raise ValueError("Don't care chunk input size is non-zero (%u)" %
                            (data_sz))
-        else:
-          pos += chunk_sz
+        # Fills the don't care data ranges with zeros.
+        # TODO(xunchang) pass the care_map to hashtree info generator.
+        if hashtree_info_generator:
+          fill_data = '\x00' * 4
+          # In order to compute verity hashtree on device, we need to write
+          # zeros explicitly to the don't care ranges. Because these ranges may
+          # contain non-zero data from the previous build.
+          care_data.append(pos)
+          care_data.append(pos + chunk_sz)
+          offset_map.append((pos, chunk_sz, None, fill_data))
+
+        pos += chunk_sz
 
       elif chunk_type == 0xCAC4:
         raise ValueError("CRC32 chunks are not supported")
@@ -128,6 +145,10 @@
     extended = extended.intersect(all_blocks).subtract(self.care_map)
     self.extended = extended
 
+    self.hashtree_info = None
+    if hashtree_info_generator:
+      self.hashtree_info = hashtree_info_generator.Generate(self)
+
     if file_map_fn:
       self.LoadFileBlockMap(file_map_fn, self.clobbered_blocks,
                             allow_shared_blocks)
@@ -227,15 +248,21 @@
         ranges = rangelib.RangeSet.parse(ranges)
 
         if allow_shared_blocks:
-          # Find the shared blocks that have been claimed by others.
+          # Find the shared blocks that have been claimed by others. If so, tag
+          # the entry so that we can skip applying imgdiff on this file.
           shared_blocks = ranges.subtract(remaining)
           if shared_blocks:
-            ranges = ranges.subtract(shared_blocks)
-            if not ranges:
+            non_shared = ranges.subtract(shared_blocks)
+            if not non_shared:
               continue
 
-            # Tag the entry so that we can skip applying imgdiff on this file.
-            ranges.extra['uses_shared_blocks'] = True
+            # There shouldn't anything in the extra dict yet.
+            assert not ranges.extra, "Non-empty RangeSet.extra"
+
+            # Put the non-shared RangeSet as the value in the block map, which
+            # has a copy of the original RangeSet.
+            non_shared.extra['uses_shared_blocks'] = ranges
+            ranges = non_shared
 
         out[fn] = ranges
         assert ranges.size() == ranges.intersect(remaining).size()
@@ -246,6 +273,8 @@
         remaining = remaining.subtract(ranges)
 
     remaining = remaining.subtract(clobbered_blocks)
+    if self.hashtree_info:
+      remaining = remaining.subtract(self.hashtree_info.hashtree_range)
 
     # For all the remaining blocks in the care_map (ie, those that
     # aren't part of the data for any file nor part of the clobbered_blocks),
@@ -308,6 +337,8 @@
         out["__NONZERO-%d" % i] = rangelib.RangeSet(data=blocks)
     if clobbered_blocks:
       out["__COPY"] = clobbered_blocks
+    if self.hashtree_info:
+      out["__HASHTREE"] = self.hashtree_info.hashtree_range
 
   def ResetFileMap(self):
     """Throw away the file map and treat the entire image as
diff --git a/tools/releasetools/test_add_img_to_target_files.py b/tools/releasetools/test_add_img_to_target_files.py
index 9a0f78e..d2a274d 100644
--- a/tools/releasetools/test_add_img_to_target_files.py
+++ b/tools/releasetools/test_add_img_to_target_files.py
@@ -16,27 +16,35 @@
 
 import os
 import os.path
-import unittest
 import zipfile
 
 import common
 import test_utils
 from add_img_to_target_files import (
-    AddCareMapTxtForAbOta, AddPackRadioImages, AddRadioImagesForAbOta,
-    GetCareMap)
+    AddCareMapForAbOta, AddPackRadioImages, AppendVBMetaArgsForPartition,
+    CheckAbOtaImages, GetCareMap)
 from rangelib import RangeSet
 
 
 OPTIONS = common.OPTIONS
 
 
-class AddImagesToTargetFilesTest(unittest.TestCase):
+class AddImagesToTargetFilesTest(test_utils.ReleaseToolsTestCase):
 
   def setUp(self):
     OPTIONS.input_tmp = common.MakeTempDir()
 
-  def tearDown(self):
-    common.Cleanup()
+  def _verifyCareMap(self, expected, file_name):
+    """Parses the care_map.pb; and checks the content in plain text."""
+    text_file = common.MakeTempFile(prefix="caremap-", suffix=".txt")
+
+    # Calls an external binary to convert the proto message.
+    cmd = ["care_map_generator", "--parse_proto", file_name, text_file]
+    common.RunAndCheckOutput(cmd)
+
+    with open(text_file, 'r') as verify_fp:
+      plain_text = verify_fp.read()
+    self.assertEqual('\n'.join(expected), plain_text)
 
   @staticmethod
   def _create_images(images, prefix):
@@ -55,73 +63,25 @@
       os.mkdir(images_path)
     return images, images_path
 
-  def test_AddRadioImagesForAbOta_imageExists(self):
+  def test_CheckAbOtaImages_imageExistsUnderImages(self):
     """Tests the case with existing images under IMAGES/."""
-    images, images_path = self._create_images(['aboot', 'xbl'], 'IMAGES')
-    AddRadioImagesForAbOta(None, images)
+    images, _ = self._create_images(['aboot', 'xbl'], 'IMAGES')
+    CheckAbOtaImages(None, images)
 
-    for image in images:
-      self.assertTrue(
-          os.path.exists(os.path.join(images_path, image + '.img')))
+  def test_CheckAbOtaImages_imageExistsUnderRadio(self):
+    """Tests the case with some image under RADIO/."""
+    images, _ = self._create_images(['system', 'vendor'], 'IMAGES')
+    radio_path = os.path.join(OPTIONS.input_tmp, 'RADIO')
+    if not os.path.exists(radio_path):
+      os.mkdir(radio_path)
+    with open(os.path.join(radio_path, 'modem.img'), 'wb') as image_fp:
+      image_fp.write('modem'.encode())
+    CheckAbOtaImages(None, images + ['modem'])
 
-  def test_AddRadioImagesForAbOta_copyFromRadio(self):
-    """Tests the case that copies images from RADIO/."""
-    images, images_path = self._create_images(['aboot', 'xbl'], 'RADIO')
-    AddRadioImagesForAbOta(None, images)
-
-    for image in images:
-      self.assertTrue(
-          os.path.exists(os.path.join(images_path, image + '.img')))
-
-  def test_AddRadioImagesForAbOta_copyFromRadio_zipOutput(self):
+  def test_CheckAbOtaImages_missingImages(self):
     images, _ = self._create_images(['aboot', 'xbl'], 'RADIO')
-
-    # Set up the output zip.
-    output_file = common.MakeTempFile(suffix='.zip')
-    with zipfile.ZipFile(output_file, 'w') as output_zip:
-      AddRadioImagesForAbOta(output_zip, images)
-
-    with zipfile.ZipFile(output_file, 'r') as verify_zip:
-      for image in images:
-        self.assertIn('IMAGES/' + image + '.img', verify_zip.namelist())
-
-  def test_AddRadioImagesForAbOta_copyFromVendorImages(self):
-    """Tests the case that copies images from VENDOR_IMAGES/."""
-    vendor_images_path = os.path.join(OPTIONS.input_tmp, 'VENDOR_IMAGES')
-    os.mkdir(vendor_images_path)
-
-    partitions = ['aboot', 'xbl']
-    for index, partition in enumerate(partitions):
-      subdir = os.path.join(vendor_images_path, 'subdir-{}'.format(index))
-      os.mkdir(subdir)
-
-      partition_image_path = os.path.join(subdir, partition + '.img')
-      with open(partition_image_path, 'wb') as partition_fp:
-        partition_fp.write(partition.encode())
-
-    # Set up the output dir.
-    images_path = os.path.join(OPTIONS.input_tmp, 'IMAGES')
-    os.mkdir(images_path)
-
-    AddRadioImagesForAbOta(None, partitions)
-
-    for partition in partitions:
-      self.assertTrue(
-          os.path.exists(os.path.join(images_path, partition + '.img')))
-
-  def test_AddRadioImagesForAbOta_missingImages(self):
-    images, _ = self._create_images(['aboot', 'xbl'], 'RADIO')
-    self.assertRaises(AssertionError, AddRadioImagesForAbOta, None,
-                      images + ['baz'])
-
-  def test_AddRadioImagesForAbOta_missingImages_zipOutput(self):
-    images, _ = self._create_images(['aboot', 'xbl'], 'RADIO')
-
-    # Set up the output zip.
-    output_file = common.MakeTempFile(suffix='.zip')
-    with zipfile.ZipFile(output_file, 'w') as output_zip:
-      self.assertRaises(AssertionError, AddRadioImagesForAbOta, output_zip,
-                        images + ['baz'])
+    self.assertRaises(
+        AssertionError, CheckAbOtaImages, None, images + ['baz'])
 
   def test_AddPackRadioImages(self):
     images, images_path = self._create_images(['foo', 'bar'], 'RADIO')
@@ -172,11 +132,18 @@
                       images + ['baz'])
 
   @staticmethod
-  def _test_AddCareMapTxtForAbOta():
-    """Helper function to set up the test for test_AddCareMapTxtForAbOta()."""
+  def _test_AddCareMapForAbOta():
+    """Helper function to set up the test for test_AddCareMapForAbOta()."""
     OPTIONS.info_dict = {
-        'system_verity_block_device' : '/dev/block/system',
-        'vendor_verity_block_device' : '/dev/block/vendor',
+        'system_verity_block_device': '/dev/block/system',
+        'vendor_verity_block_device': '/dev/block/vendor',
+        'system.build.prop': {
+            'ro.system.build.fingerprint':
+                'google/sailfish/12345:user/dev-keys',
+        },
+        'vendor.build.prop': {
+            'ro.vendor.build.fingerprint': 'google/sailfish/678:user/dev-keys',
+        }
     }
 
     # Prepare the META/ folder.
@@ -197,121 +164,197 @@
     }
     return image_paths
 
-  def test_AddCareMapTxtForAbOta(self):
-    image_paths = self._test_AddCareMapTxtForAbOta()
+  def test_AddCareMapForAbOta(self):
+    image_paths = self._test_AddCareMapForAbOta()
 
-    AddCareMapTxtForAbOta(None, ['system', 'vendor'], image_paths)
+    AddCareMapForAbOta(None, ['system', 'vendor'], image_paths)
 
-    care_map_file = os.path.join(OPTIONS.input_tmp, 'META', 'care_map.txt')
-    with open(care_map_file, 'r') as verify_fp:
-      care_map = verify_fp.read()
+    care_map_file = os.path.join(OPTIONS.input_tmp, 'META', 'care_map.pb')
+    expected = ['system', RangeSet("0-5 10-15").to_string_raw(),
+                "ro.system.build.fingerprint",
+                "google/sailfish/12345:user/dev-keys",
+                'vendor', RangeSet("0-9").to_string_raw(),
+                "ro.vendor.build.fingerprint",
+                "google/sailfish/678:user/dev-keys"]
 
-    lines = care_map.split('\n')
-    self.assertEqual(4, len(lines))
-    self.assertEqual('system', lines[0])
-    self.assertEqual(RangeSet("0-5 10-15").to_string_raw(), lines[1])
-    self.assertEqual('vendor', lines[2])
-    self.assertEqual(RangeSet("0-9").to_string_raw(), lines[3])
+    self._verifyCareMap(expected, care_map_file)
 
-  def test_AddCareMapTxtForAbOta_withNonCareMapPartitions(self):
+  def test_AddCareMapForAbOta_withNonCareMapPartitions(self):
     """Partitions without care_map should be ignored."""
-    image_paths = self._test_AddCareMapTxtForAbOta()
+    image_paths = self._test_AddCareMapForAbOta()
 
-    AddCareMapTxtForAbOta(
+    AddCareMapForAbOta(
         None, ['boot', 'system', 'vendor', 'vbmeta'], image_paths)
 
-    care_map_file = os.path.join(OPTIONS.input_tmp, 'META', 'care_map.txt')
-    with open(care_map_file, 'r') as verify_fp:
-      care_map = verify_fp.read()
+    care_map_file = os.path.join(OPTIONS.input_tmp, 'META', 'care_map.pb')
+    expected = ['system', RangeSet("0-5 10-15").to_string_raw(),
+                "ro.system.build.fingerprint",
+                "google/sailfish/12345:user/dev-keys",
+                'vendor', RangeSet("0-9").to_string_raw(),
+                "ro.vendor.build.fingerprint",
+                "google/sailfish/678:user/dev-keys"]
 
-    lines = care_map.split('\n')
-    self.assertEqual(4, len(lines))
-    self.assertEqual('system', lines[0])
-    self.assertEqual(RangeSet("0-5 10-15").to_string_raw(), lines[1])
-    self.assertEqual('vendor', lines[2])
-    self.assertEqual(RangeSet("0-9").to_string_raw(), lines[3])
+    self._verifyCareMap(expected, care_map_file)
 
-  def test_AddCareMapTxtForAbOta_withAvb(self):
+  def test_AddCareMapForAbOta_withAvb(self):
     """Tests the case for device using AVB."""
-    image_paths = self._test_AddCareMapTxtForAbOta()
+    image_paths = self._test_AddCareMapForAbOta()
     OPTIONS.info_dict = {
         'avb_system_hashtree_enable' : 'true',
         'avb_vendor_hashtree_enable' : 'true',
+        'system.build.prop': {
+            'ro.system.build.fingerprint':
+                'google/sailfish/12345:user/dev-keys',
+        },
+        'vendor.build.prop': {
+            'ro.vendor.build.fingerprint': 'google/sailfish/678:user/dev-keys',
+        }
     }
 
-    AddCareMapTxtForAbOta(None, ['system', 'vendor'], image_paths)
+    AddCareMapForAbOta(None, ['system', 'vendor'], image_paths)
 
-    care_map_file = os.path.join(OPTIONS.input_tmp, 'META', 'care_map.txt')
-    with open(care_map_file, 'r') as verify_fp:
-      care_map = verify_fp.read()
+    care_map_file = os.path.join(OPTIONS.input_tmp, 'META', 'care_map.pb')
+    expected = ['system', RangeSet("0-5 10-15").to_string_raw(),
+                "ro.system.build.fingerprint",
+                "google/sailfish/12345:user/dev-keys",
+                'vendor', RangeSet("0-9").to_string_raw(),
+                "ro.vendor.build.fingerprint",
+                "google/sailfish/678:user/dev-keys"]
 
-    lines = care_map.split('\n')
-    self.assertEqual(4, len(lines))
-    self.assertEqual('system', lines[0])
-    self.assertEqual(RangeSet("0-5 10-15").to_string_raw(), lines[1])
-    self.assertEqual('vendor', lines[2])
-    self.assertEqual(RangeSet("0-9").to_string_raw(), lines[3])
+    self._verifyCareMap(expected, care_map_file)
 
-  def test_AddCareMapTxtForAbOta_verityNotEnabled(self):
-    """No care_map.txt should be generated if verity not enabled."""
-    image_paths = self._test_AddCareMapTxtForAbOta()
+  def test_AddCareMapForAbOta_noFingerprint(self):
+    """Tests the case for partitions without fingerprint."""
+    image_paths = self._test_AddCareMapForAbOta()
+    OPTIONS.info_dict = {
+        'system_verity_block_device': '/dev/block/system',
+        'vendor_verity_block_device': '/dev/block/vendor',
+    }
+
+    AddCareMapForAbOta(None, ['system', 'vendor'], image_paths)
+
+    care_map_file = os.path.join(OPTIONS.input_tmp, 'META', 'care_map.pb')
+    expected = ['system', RangeSet("0-5 10-15").to_string_raw(), "unknown",
+                "unknown", 'vendor', RangeSet("0-9").to_string_raw(), "unknown",
+                "unknown"]
+
+    self._verifyCareMap(expected, care_map_file)
+
+  def test_AddCareMapForAbOta_withThumbprint(self):
+    """Tests the case for partitions with thumbprint."""
+    image_paths = self._test_AddCareMapForAbOta()
+    OPTIONS.info_dict = {
+        'system_verity_block_device': '/dev/block/system',
+        'vendor_verity_block_device': '/dev/block/vendor',
+        'system.build.prop': {
+            'ro.system.build.thumbprint': 'google/sailfish/123:user/dev-keys',
+        },
+        'vendor.build.prop' : {
+            'ro.vendor.build.thumbprint': 'google/sailfish/456:user/dev-keys',
+        }
+    }
+
+    AddCareMapForAbOta(None, ['system', 'vendor'], image_paths)
+
+    care_map_file = os.path.join(OPTIONS.input_tmp, 'META', 'care_map.pb')
+    expected = ['system', RangeSet("0-5 10-15").to_string_raw(),
+                "ro.system.build.thumbprint",
+                "google/sailfish/123:user/dev-keys",
+                'vendor', RangeSet("0-9").to_string_raw(),
+                "ro.vendor.build.thumbprint",
+                "google/sailfish/456:user/dev-keys"]
+
+    self._verifyCareMap(expected, care_map_file)
+
+  def test_AddCareMapForAbOta_verityNotEnabled(self):
+    """No care_map.pb should be generated if verity not enabled."""
+    image_paths = self._test_AddCareMapForAbOta()
     OPTIONS.info_dict = {}
-    AddCareMapTxtForAbOta(None, ['system', 'vendor'], image_paths)
+    AddCareMapForAbOta(None, ['system', 'vendor'], image_paths)
 
-    care_map_file = os.path.join(OPTIONS.input_tmp, 'META', 'care_map.txt')
+    care_map_file = os.path.join(OPTIONS.input_tmp, 'META', 'care_map.pb')
     self.assertFalse(os.path.exists(care_map_file))
 
-  def test_AddCareMapTxtForAbOta_missingImageFile(self):
+  def test_AddCareMapForAbOta_missingImageFile(self):
     """Missing image file should be considered fatal."""
-    image_paths = self._test_AddCareMapTxtForAbOta()
+    image_paths = self._test_AddCareMapForAbOta()
     image_paths['vendor'] = ''
-    self.assertRaises(AssertionError, AddCareMapTxtForAbOta, None,
+    self.assertRaises(AssertionError, AddCareMapForAbOta, None,
                       ['system', 'vendor'], image_paths)
 
-  def test_AddCareMapTxtForAbOta_zipOutput(self):
+  def test_AddCareMapForAbOta_zipOutput(self):
     """Tests the case with ZIP output."""
-    image_paths = self._test_AddCareMapTxtForAbOta()
+    image_paths = self._test_AddCareMapForAbOta()
 
     output_file = common.MakeTempFile(suffix='.zip')
     with zipfile.ZipFile(output_file, 'w') as output_zip:
-      AddCareMapTxtForAbOta(output_zip, ['system', 'vendor'], image_paths)
+      AddCareMapForAbOta(output_zip, ['system', 'vendor'], image_paths)
 
+    care_map_name = "META/care_map.pb"
+    temp_dir = common.MakeTempDir()
     with zipfile.ZipFile(output_file, 'r') as verify_zip:
-      care_map = verify_zip.read('META/care_map.txt').decode('ascii')
+      self.assertTrue(care_map_name in verify_zip.namelist())
+      verify_zip.extract(care_map_name, path=temp_dir)
 
-    lines = care_map.split('\n')
-    self.assertEqual(4, len(lines))
-    self.assertEqual('system', lines[0])
-    self.assertEqual(RangeSet("0-5 10-15").to_string_raw(), lines[1])
-    self.assertEqual('vendor', lines[2])
-    self.assertEqual(RangeSet("0-9").to_string_raw(), lines[3])
+    expected = ['system', RangeSet("0-5 10-15").to_string_raw(),
+                "ro.system.build.fingerprint",
+                "google/sailfish/12345:user/dev-keys",
+                'vendor', RangeSet("0-9").to_string_raw(),
+                "ro.vendor.build.fingerprint",
+                "google/sailfish/678:user/dev-keys"]
+    self._verifyCareMap(expected, os.path.join(temp_dir, care_map_name))
 
-  def test_AddCareMapTxtForAbOta_zipOutput_careMapEntryExists(self):
+  def test_AddCareMapForAbOta_zipOutput_careMapEntryExists(self):
     """Tests the case with ZIP output which already has care_map entry."""
-    image_paths = self._test_AddCareMapTxtForAbOta()
+    image_paths = self._test_AddCareMapForAbOta()
 
     output_file = common.MakeTempFile(suffix='.zip')
     with zipfile.ZipFile(output_file, 'w') as output_zip:
-      # Create an existing META/care_map.txt entry.
-      common.ZipWriteStr(output_zip, 'META/care_map.txt', 'dummy care_map.txt')
+      # Create an existing META/care_map.pb entry.
+      common.ZipWriteStr(output_zip, 'META/care_map.pb',
+                         'dummy care_map.pb')
 
-      # Request to add META/care_map.txt again.
-      AddCareMapTxtForAbOta(output_zip, ['system', 'vendor'], image_paths)
+      # Request to add META/care_map.pb again.
+      AddCareMapForAbOta(output_zip, ['system', 'vendor'], image_paths)
 
     # The one under OPTIONS.input_tmp must have been replaced.
-    care_map_file = os.path.join(OPTIONS.input_tmp, 'META', 'care_map.txt')
-    with open(care_map_file, 'r') as verify_fp:
-      care_map = verify_fp.read()
+    care_map_file = os.path.join(OPTIONS.input_tmp, 'META', 'care_map.pb')
+    expected = ['system', RangeSet("0-5 10-15").to_string_raw(),
+                "ro.system.build.fingerprint",
+                "google/sailfish/12345:user/dev-keys",
+                'vendor', RangeSet("0-9").to_string_raw(),
+                "ro.vendor.build.fingerprint",
+                "google/sailfish/678:user/dev-keys"]
 
-    lines = care_map.split('\n')
-    self.assertEqual(4, len(lines))
-    self.assertEqual('system', lines[0])
-    self.assertEqual(RangeSet("0-5 10-15").to_string_raw(), lines[1])
-    self.assertEqual('vendor', lines[2])
-    self.assertEqual(RangeSet("0-9").to_string_raw(), lines[3])
+    self._verifyCareMap(expected, care_map_file)
 
     # The existing entry should be scheduled to be replaced.
-    self.assertIn('META/care_map.txt', OPTIONS.replace_updated_files_list)
+    self.assertIn('META/care_map.pb', OPTIONS.replace_updated_files_list)
+
+  def test_AppendVBMetaArgsForPartition(self):
+    OPTIONS.info_dict = {}
+    cmd = []
+    AppendVBMetaArgsForPartition(cmd, 'system', '/path/to/system.img')
+    self.assertEqual(
+        ['--include_descriptors_from_image', '/path/to/system.img'], cmd)
+
+  def test_AppendVBMetaArgsForPartition_vendorAsChainedPartition(self):
+    testdata_dir = test_utils.get_testdata_dir()
+    pubkey = os.path.join(testdata_dir, 'testkey.pubkey.pem')
+    OPTIONS.info_dict = {
+        'avb_avbtool': 'avbtool',
+        'avb_vendor_key_path': pubkey,
+        'avb_vendor_rollback_index_location': 5,
+    }
+    cmd = []
+    AppendVBMetaArgsForPartition(cmd, 'vendor', '/path/to/vendor.img')
+    self.assertEqual(2, len(cmd))
+    self.assertEqual('--chain_partition', cmd[0])
+    chained_partition_args = cmd[1].split(':')
+    self.assertEqual(3, len(chained_partition_args))
+    self.assertEqual('vendor', chained_partition_args[0])
+    self.assertEqual('5', chained_partition_args[1])
+    self.assertTrue(os.path.exists(chained_partition_args[2]))
 
   def test_GetCareMap(self):
     sparse_image = test_utils.construct_sparse_image([
@@ -319,7 +362,7 @@
         (0xCAC3, 4),
         (0xCAC1, 6)])
     OPTIONS.info_dict = {
-        'system_adjusted_partition_size' : 12,
+        'system_image_blocks' : 12,
     }
     name, care_map = GetCareMap('system', sparse_image)
     self.assertEqual('system', name)
@@ -334,6 +377,6 @@
         (0xCAC3, 4),
         (0xCAC1, 6)])
     OPTIONS.info_dict = {
-        'system_adjusted_partition_size' : -12,
+        'system_image_blocks' : -12,
     }
     self.assertRaises(AssertionError, GetCareMap, 'system', sparse_image)
diff --git a/tools/releasetools/test_blockimgdiff.py b/tools/releasetools/test_blockimgdiff.py
index ceada18..857026e 100644
--- a/tools/releasetools/test_blockimgdiff.py
+++ b/tools/releasetools/test_blockimgdiff.py
@@ -14,17 +14,14 @@
 # limitations under the License.
 #
 
-from __future__ import print_function
-
-import unittest
-
 import common
-from blockimgdiff import (BlockImageDiff, EmptyImage, HeapItem, ImgdiffStats,
-                          Transfer)
+from blockimgdiff import (
+    BlockImageDiff, EmptyImage, HeapItem, ImgdiffStats, Transfer)
 from rangelib import RangeSet
+from test_utils import ReleaseToolsTestCase
 
 
-class HealpItemTest(unittest.TestCase):
+class HealpItemTest(ReleaseToolsTestCase):
 
   class Item(object):
     def __init__(self, score):
@@ -54,7 +51,7 @@
     self.assertFalse(item)
 
 
-class BlockImageDiffTest(unittest.TestCase):
+class BlockImageDiffTest(ReleaseToolsTestCase):
 
   def test_GenerateDigraphOrder(self):
     """Make sure GenerateDigraph preserves the order.
@@ -203,8 +200,8 @@
 
     self.assertDictEqual(
         {
-            ImgdiffStats.USED_IMGDIFF : {"/system/app/app1.apk"},
-            ImgdiffStats.USED_IMGDIFF_LARGE_APK : {"/vendor/app/app2.apk"},
+            ImgdiffStats.USED_IMGDIFF: {"/system/app/app1.apk"},
+            ImgdiffStats.USED_IMGDIFF_LARGE_APK: {"/vendor/app/app2.apk"},
         },
         block_image_diff.imgdiff_stats.stats)
 
@@ -229,13 +226,6 @@
             "/system/app/app2.apk", RangeSet("10-15"),
             RangeSet("15-20 30 10-14")))
 
-    # At least one of the ranges has been modified.
-    src_ranges = RangeSet("0-5")
-    src_ranges.extra['trimmed'] = True
-    self.assertFalse(
-        block_image_diff.CanUseImgdiff(
-            "/vendor/app/app3.apk", RangeSet("10-15"), src_ranges))
-
     # At least one of the ranges is incomplete.
     src_ranges = RangeSet("0-5")
     src_ranges.extra['incomplete'] = True
@@ -246,14 +236,13 @@
     # The stats are correctly logged.
     self.assertDictEqual(
         {
-            ImgdiffStats.SKIPPED_NONMONOTONIC : {'/system/app/app2.apk'},
-            ImgdiffStats.SKIPPED_TRIMMED : {'/vendor/app/app3.apk'},
+            ImgdiffStats.SKIPPED_NONMONOTONIC: {'/system/app/app2.apk'},
             ImgdiffStats.SKIPPED_INCOMPLETE: {'/vendor/app/app4.apk'},
         },
         block_image_diff.imgdiff_stats.stats)
 
 
-class ImgdiffStatsTest(unittest.TestCase):
+class ImgdiffStatsTest(ReleaseToolsTestCase):
 
   def test_Log(self):
     imgdiff_stats = ImgdiffStats()
diff --git a/tools/releasetools/test_build_image.py b/tools/releasetools/test_build_image.py
index 161faff..1cebd0c 100644
--- a/tools/releasetools/test_build_image.py
+++ b/tools/releasetools/test_build_image.py
@@ -14,13 +14,16 @@
 # limitations under the License.
 #
 
-import unittest
+import filecmp
+import os.path
 
 import common
-from build_image import CheckHeadroom, RunCommand
+from build_image import (
+    BuildImageError, CheckHeadroom, GetFilesystemCharacteristics, SetUpInDirAndFsConfig)
+from test_utils import ReleaseToolsTestCase
 
 
-class BuildImageTest(unittest.TestCase):
+class BuildImageTest(ReleaseToolsTestCase):
 
   # Available: 1000 blocks.
   EXT4FS_OUTPUT = (
@@ -33,7 +36,7 @@
         'partition_headroom' : '4096000',
         'mount_point' : 'system',
     }
-    self.assertTrue(CheckHeadroom(self.EXT4FS_OUTPUT, prop_dict))
+    CheckHeadroom(self.EXT4FS_OUTPUT, prop_dict)
 
   def test_CheckHeadroom_InsufficientHeadroom(self):
     # Required headroom: 1001 blocks.
@@ -42,7 +45,8 @@
         'partition_headroom' : '4100096',
         'mount_point' : 'system',
     }
-    self.assertFalse(CheckHeadroom(self.EXT4FS_OUTPUT, prop_dict))
+    self.assertRaises(
+        BuildImageError, CheckHeadroom, self.EXT4FS_OUTPUT, prop_dict)
 
   def test_CheckHeadroom_WrongFsType(self):
     prop_dict = {
@@ -72,23 +76,125 @@
     """Tests the result parsing from actual call to mke2fs."""
     input_dir = common.MakeTempDir()
     output_image = common.MakeTempFile(suffix='.img')
-    command = ['mkuserimg_mke2fs.sh', input_dir, output_image, 'ext4',
+    command = ['mkuserimg_mke2fs', input_dir, output_image, 'ext4',
                '/system', '409600', '-j', '0']
-    ext4fs_output, exit_code = RunCommand(command)
-    self.assertEqual(0, exit_code)
+    proc = common.Run(command)
+    ext4fs_output, _ = proc.communicate()
+    self.assertEqual(0, proc.returncode)
 
     prop_dict = {
         'fs_type' : 'ext4',
         'partition_headroom' : '40960',
         'mount_point' : 'system',
     }
-    self.assertTrue(CheckHeadroom(ext4fs_output, prop_dict))
+    CheckHeadroom(ext4fs_output, prop_dict)
 
     prop_dict = {
         'fs_type' : 'ext4',
         'partition_headroom' : '413696',
         'mount_point' : 'system',
     }
-    self.assertFalse(CheckHeadroom(ext4fs_output, prop_dict))
+    self.assertRaises(BuildImageError, CheckHeadroom, ext4fs_output, prop_dict)
 
-    common.Cleanup()
+  def test_SetUpInDirAndFsConfig_SystemRootImageTrue_NonSystem(self):
+    prop_dict = {
+        'fs_config': 'fs-config',
+        'mount_point': 'vendor',
+        'system_root_image': 'true',
+    }
+    in_dir, fs_config = SetUpInDirAndFsConfig('/path/to/in_dir', prop_dict)
+    self.assertEqual('/path/to/in_dir', in_dir)
+    self.assertEqual('fs-config', fs_config)
+    self.assertEqual('vendor', prop_dict['mount_point'])
+
+  @staticmethod
+  def _gen_fs_config(partition):
+    fs_config = common.MakeTempFile(suffix='.txt')
+    with open(fs_config, 'w') as fs_config_fp:
+      fs_config_fp.write('fs-config-{}\n'.format(partition))
+    return fs_config
+
+  def test_SetUpInDirAndFsConfig(self):
+    root_dir = common.MakeTempDir()
+    with open(os.path.join(root_dir, 'init'), 'w') as init_fp:
+      init_fp.write('init')
+
+    origin_in = common.MakeTempDir()
+    with open(os.path.join(origin_in, 'file'), 'w') as in_fp:
+      in_fp.write('system-file')
+    os.symlink('../etc', os.path.join(origin_in, 'symlink'))
+
+    fs_config_system = self._gen_fs_config('system')
+
+    prop_dict = {
+        'fs_config': fs_config_system,
+        'mount_point': 'system',
+        'root_dir': root_dir,
+    }
+    in_dir, fs_config = SetUpInDirAndFsConfig(origin_in, prop_dict)
+
+    self.assertTrue(filecmp.cmp(
+        os.path.join(in_dir, 'init'), os.path.join(root_dir, 'init')))
+    self.assertTrue(filecmp.cmp(
+        os.path.join(in_dir, 'system', 'file'),
+        os.path.join(origin_in, 'file')))
+    self.assertTrue(os.path.islink(os.path.join(in_dir, 'system', 'symlink')))
+
+    self.assertTrue(filecmp.cmp(fs_config_system, fs_config))
+    self.assertEqual('/', prop_dict['mount_point'])
+
+  def test_SetUpInDirAndFsConfig_WithRootFsConfig(self):
+    root_dir = common.MakeTempDir()
+    with open(os.path.join(root_dir, 'init'), 'w') as init_fp:
+      init_fp.write('init')
+
+    origin_in = common.MakeTempDir()
+    with open(os.path.join(origin_in, 'file'), 'w') as in_fp:
+      in_fp.write('system-file')
+    os.symlink('../etc', os.path.join(origin_in, 'symlink'))
+
+    fs_config_system = self._gen_fs_config('system')
+    fs_config_root = self._gen_fs_config('root')
+
+    prop_dict = {
+        'fs_config': fs_config_system,
+        'mount_point': 'system',
+        'root_dir': root_dir,
+        'root_fs_config': fs_config_root,
+    }
+    in_dir, fs_config = SetUpInDirAndFsConfig(origin_in, prop_dict)
+
+    self.assertTrue(filecmp.cmp(
+        os.path.join(in_dir, 'init'), os.path.join(root_dir, 'init')))
+    self.assertTrue(filecmp.cmp(
+        os.path.join(in_dir, 'system', 'file'),
+        os.path.join(origin_in, 'file')))
+    self.assertTrue(os.path.islink(os.path.join(in_dir, 'system', 'symlink')))
+
+    with open(fs_config) as fs_config_fp:
+      fs_config_data = fs_config_fp.readlines()
+    self.assertIn('fs-config-system\n', fs_config_data)
+    self.assertIn('fs-config-root\n', fs_config_data)
+    self.assertEqual('/', prop_dict['mount_point'])
+
+  def test_GetFilesystemCharacteristics(self):
+    input_dir = common.MakeTempDir()
+    output_image = common.MakeTempFile(suffix='.img')
+    command = ['mkuserimg_mke2fs', input_dir, output_image, 'ext4',
+               '/system', '409600', '-j', '0']
+    proc = common.Run(command)
+    ext4fs_output, _ = proc.communicate()
+    self.assertEqual(0, proc.returncode)
+
+    output_file = common.MakeTempFile(suffix='.img')
+    cmd = ["img2simg", output_image, output_file]
+    p = common.Run(cmd)
+    p.communicate()
+    self.assertEqual(0, p.returncode)
+
+    fs_dict = GetFilesystemCharacteristics(output_file)
+    self.assertEqual(int(fs_dict['Block size']), 4096)
+    self.assertGreaterEqual(int(fs_dict['Free blocks']), 0) # expect ~88
+    self.assertGreater(int(fs_dict['Inode count']), 0)      # expect ~64
+    self.assertGreaterEqual(int(fs_dict['Free inodes']), 0) # expect ~53
+    self.assertGreater(int(fs_dict['Inode count']), int(fs_dict['Free inodes']))
diff --git a/tools/releasetools/test_common.py b/tools/releasetools/test_common.py
index fb26b66..c99049a 100644
--- a/tools/releasetools/test_common.py
+++ b/tools/releasetools/test_common.py
@@ -14,11 +14,11 @@
 # limitations under the License.
 #
 
+import copy
 import os
 import subprocess
 import tempfile
 import time
-import unittest
 import zipfile
 from hashlib import sha1
 
@@ -43,7 +43,8 @@
     yield '\0' * (step_size - block_size)
 
 
-class CommonZipTest(unittest.TestCase):
+class CommonZipTest(test_utils.ReleaseToolsTestCase):
+
   def _verify(self, zip_file, zip_file_name, arcname, expected_hash,
               test_file_name=None, expected_stat=None, expected_mode=0o644,
               expected_compress_type=zipfile.ZIP_STORED):
@@ -333,8 +334,8 @@
         self.assertFalse('Test2' in entries)
         self.assertTrue('Test3' in entries)
 
-      self.assertRaises(AssertionError, common.ZipDelete, zip_file.name,
-                        'Test2')
+      self.assertRaises(
+          common.ExternalError, common.ZipDelete, zip_file.name, 'Test2')
       with zipfile.ZipFile(zip_file.name, 'r') as check_zip:
         entries = check_zip.namelist()
         self.assertTrue('Test1' in entries)
@@ -358,7 +359,7 @@
       os.remove(zip_file.name)
 
 
-class CommonApkUtilsTest(unittest.TestCase):
+class CommonApkUtilsTest(test_utils.ReleaseToolsTestCase):
   """Tests the APK utils related functions."""
 
   APKCERTS_TXT1 = (
@@ -406,9 +407,6 @@
   def setUp(self):
     self.testdata_dir = test_utils.get_testdata_dir()
 
-  def tearDown(self):
-    common.Cleanup()
-
   @staticmethod
   def _write_apkcerts_txt(apkcerts_txt, additional=None):
     if additional is None:
@@ -504,11 +502,28 @@
       actual = common.ParseCertificate(cert_fp.read())
     self.assertEqual(expected, actual)
 
+  def test_GetMinSdkVersion(self):
+    test_app = os.path.join(self.testdata_dir, 'TestApp.apk')
+    self.assertEqual('24', common.GetMinSdkVersion(test_app))
 
-class CommonUtilsTest(unittest.TestCase):
+  def test_GetMinSdkVersion_invalidInput(self):
+    self.assertRaises(
+        common.ExternalError, common.GetMinSdkVersion, 'does-not-exist.apk')
 
-  def tearDown(self):
-    common.Cleanup()
+  def test_GetMinSdkVersionInt(self):
+    test_app = os.path.join(self.testdata_dir, 'TestApp.apk')
+    self.assertEqual(24, common.GetMinSdkVersionInt(test_app, {}))
+
+  def test_GetMinSdkVersionInt_invalidInput(self):
+    self.assertRaises(
+        common.ExternalError, common.GetMinSdkVersionInt, 'does-not-exist.apk',
+        {})
+
+
+class CommonUtilsTest(test_utils.ReleaseToolsTestCase):
+
+  def setUp(self):
+    self.testdata_dir = test_utils.get_testdata_dir()
 
   def test_GetSparseImage_emptyBlockMapFile(self):
     target_files = common.MakeTempFile(prefix='target_files-', suffix='.zip')
@@ -645,8 +660,276 @@
     self.assertFalse(sparse_image.file_map['/system/file1'].extra)
     self.assertTrue(sparse_image.file_map['/system/file2'].extra['incomplete'])
 
+  def test_GetSparseImage_systemRootImage_filenameWithExtraLeadingSlash(self):
+    target_files = common.MakeTempFile(prefix='target_files-', suffix='.zip')
+    with zipfile.ZipFile(target_files, 'w') as target_files_zip:
+      target_files_zip.write(
+          test_utils.construct_sparse_image([(0xCAC2, 16)]),
+          arcname='IMAGES/system.img')
+      target_files_zip.writestr(
+          'IMAGES/system.map',
+          '\n'.join([
+              '//system/file1 1-5 9-10',
+              '//system/file2 11-12',
+              '/system/app/file3 13-15']))
+      target_files_zip.writestr('SYSTEM/file1', os.urandom(4096 * 7))
+      # '/system/file2' has less blocks listed (2) than actual (3).
+      target_files_zip.writestr('SYSTEM/file2', os.urandom(4096 * 3))
+      # '/system/app/file3' has less blocks listed (3) than actual (4).
+      target_files_zip.writestr('SYSTEM/app/file3', os.urandom(4096 * 4))
 
-class InstallRecoveryScriptFormatTest(unittest.TestCase):
+    tempdir = common.UnzipTemp(target_files)
+    with zipfile.ZipFile(target_files, 'r') as input_zip:
+      sparse_image = common.GetSparseImage('system', tempdir, input_zip, False)
+
+    self.assertFalse(sparse_image.file_map['//system/file1'].extra)
+    self.assertTrue(sparse_image.file_map['//system/file2'].extra['incomplete'])
+    self.assertTrue(
+        sparse_image.file_map['/system/app/file3'].extra['incomplete'])
+
+  def test_GetSparseImage_systemRootImage_nonSystemFiles(self):
+    target_files = common.MakeTempFile(prefix='target_files-', suffix='.zip')
+    with zipfile.ZipFile(target_files, 'w') as target_files_zip:
+      target_files_zip.write(
+          test_utils.construct_sparse_image([(0xCAC2, 16)]),
+          arcname='IMAGES/system.img')
+      target_files_zip.writestr(
+          'IMAGES/system.map',
+          '\n'.join([
+              '//system/file1 1-5 9-10',
+              '//init.rc 13-15']))
+      target_files_zip.writestr('SYSTEM/file1', os.urandom(4096 * 7))
+      # '/init.rc' has less blocks listed (3) than actual (4).
+      target_files_zip.writestr('ROOT/init.rc', os.urandom(4096 * 4))
+
+    tempdir = common.UnzipTemp(target_files)
+    with zipfile.ZipFile(target_files, 'r') as input_zip:
+      sparse_image = common.GetSparseImage('system', tempdir, input_zip, False)
+
+    self.assertFalse(sparse_image.file_map['//system/file1'].extra)
+    self.assertTrue(sparse_image.file_map['//init.rc'].extra['incomplete'])
+
+  def test_GetSparseImage_fileNotFound(self):
+    target_files = common.MakeTempFile(prefix='target_files-', suffix='.zip')
+    with zipfile.ZipFile(target_files, 'w') as target_files_zip:
+      target_files_zip.write(
+          test_utils.construct_sparse_image([(0xCAC2, 16)]),
+          arcname='IMAGES/system.img')
+      target_files_zip.writestr(
+          'IMAGES/system.map',
+          '\n'.join([
+              '//system/file1 1-5 9-10',
+              '//system/file2 11-12']))
+      target_files_zip.writestr('SYSTEM/file1', os.urandom(4096 * 7))
+
+    tempdir = common.UnzipTemp(target_files)
+    with zipfile.ZipFile(target_files, 'r') as input_zip:
+      self.assertRaises(
+          AssertionError, common.GetSparseImage, 'system', tempdir, input_zip,
+          False)
+
+  def test_GetAvbChainedPartitionArg(self):
+    pubkey = os.path.join(self.testdata_dir, 'testkey.pubkey.pem')
+    info_dict = {
+        'avb_avbtool': 'avbtool',
+        'avb_system_key_path': pubkey,
+        'avb_system_rollback_index_location': 2,
+    }
+    args = common.GetAvbChainedPartitionArg('system', info_dict).split(':')
+    self.assertEqual(3, len(args))
+    self.assertEqual('system', args[0])
+    self.assertEqual('2', args[1])
+    self.assertTrue(os.path.exists(args[2]))
+
+  def test_GetAvbChainedPartitionArg_withPrivateKey(self):
+    key = os.path.join(self.testdata_dir, 'testkey.key')
+    info_dict = {
+        'avb_avbtool': 'avbtool',
+        'avb_product_key_path': key,
+        'avb_product_rollback_index_location': 2,
+    }
+    args = common.GetAvbChainedPartitionArg('product', info_dict).split(':')
+    self.assertEqual(3, len(args))
+    self.assertEqual('product', args[0])
+    self.assertEqual('2', args[1])
+    self.assertTrue(os.path.exists(args[2]))
+
+  def test_GetAvbChainedPartitionArg_withSpecifiedKey(self):
+    info_dict = {
+        'avb_avbtool': 'avbtool',
+        'avb_system_key_path': 'does-not-exist',
+        'avb_system_rollback_index_location': 2,
+    }
+    pubkey = os.path.join(self.testdata_dir, 'testkey.pubkey.pem')
+    args = common.GetAvbChainedPartitionArg(
+        'system', info_dict, pubkey).split(':')
+    self.assertEqual(3, len(args))
+    self.assertEqual('system', args[0])
+    self.assertEqual('2', args[1])
+    self.assertTrue(os.path.exists(args[2]))
+
+  def test_GetAvbChainedPartitionArg_invalidKey(self):
+    pubkey = os.path.join(self.testdata_dir, 'testkey_with_passwd.x509.pem')
+    info_dict = {
+        'avb_avbtool': 'avbtool',
+        'avb_system_key_path': pubkey,
+        'avb_system_rollback_index_location': 2,
+    }
+    self.assertRaises(
+        common.ExternalError, common.GetAvbChainedPartitionArg, 'system',
+        info_dict)
+
+  INFO_DICT_DEFAULT = {
+      'recovery_api_version': 3,
+      'fstab_version': 2,
+      'system_root_image': 'true',
+      'no_recovery' : 'true',
+      'recovery_as_boot': 'true',
+  }
+
+  @staticmethod
+  def _test_LoadInfoDict_createTargetFiles(info_dict, fstab_path):
+    target_files = common.MakeTempFile(prefix='target_files-', suffix='.zip')
+    with zipfile.ZipFile(target_files, 'w') as target_files_zip:
+      info_values = ''.join(
+          ['{}={}\n'.format(k, v) for k, v in sorted(info_dict.iteritems())])
+      common.ZipWriteStr(target_files_zip, 'META/misc_info.txt', info_values)
+
+      FSTAB_TEMPLATE = "/dev/block/system {} ext4 ro,barrier=1 defaults"
+      if info_dict.get('system_root_image') == 'true':
+        fstab_values = FSTAB_TEMPLATE.format('/')
+      else:
+        fstab_values = FSTAB_TEMPLATE.format('/system')
+      common.ZipWriteStr(target_files_zip, fstab_path, fstab_values)
+
+      common.ZipWriteStr(
+          target_files_zip, 'META/file_contexts', 'file-contexts')
+    return target_files
+
+  def test_LoadInfoDict(self):
+    target_files = self._test_LoadInfoDict_createTargetFiles(
+        self.INFO_DICT_DEFAULT,
+        'BOOT/RAMDISK/system/etc/recovery.fstab')
+    with zipfile.ZipFile(target_files, 'r') as target_files_zip:
+      loaded_dict = common.LoadInfoDict(target_files_zip)
+      self.assertEqual(3, loaded_dict['recovery_api_version'])
+      self.assertEqual(2, loaded_dict['fstab_version'])
+      self.assertIn('/', loaded_dict['fstab'])
+      self.assertIn('/system', loaded_dict['fstab'])
+
+  def test_LoadInfoDict_legacyRecoveryFstabPath(self):
+    target_files = self._test_LoadInfoDict_createTargetFiles(
+        self.INFO_DICT_DEFAULT,
+        'BOOT/RAMDISK/etc/recovery.fstab')
+    with zipfile.ZipFile(target_files, 'r') as target_files_zip:
+      loaded_dict = common.LoadInfoDict(target_files_zip)
+      self.assertEqual(3, loaded_dict['recovery_api_version'])
+      self.assertEqual(2, loaded_dict['fstab_version'])
+      self.assertIn('/', loaded_dict['fstab'])
+      self.assertIn('/system', loaded_dict['fstab'])
+
+  def test_LoadInfoDict_dirInput(self):
+    target_files = self._test_LoadInfoDict_createTargetFiles(
+        self.INFO_DICT_DEFAULT,
+        'BOOT/RAMDISK/system/etc/recovery.fstab')
+    unzipped = common.UnzipTemp(target_files)
+    loaded_dict = common.LoadInfoDict(unzipped)
+    self.assertEqual(3, loaded_dict['recovery_api_version'])
+    self.assertEqual(2, loaded_dict['fstab_version'])
+    self.assertIn('/', loaded_dict['fstab'])
+    self.assertIn('/system', loaded_dict['fstab'])
+
+  def test_LoadInfoDict_dirInput_legacyRecoveryFstabPath(self):
+    target_files = self._test_LoadInfoDict_createTargetFiles(
+        self.INFO_DICT_DEFAULT,
+        'BOOT/RAMDISK/system/etc/recovery.fstab')
+    unzipped = common.UnzipTemp(target_files)
+    loaded_dict = common.LoadInfoDict(unzipped)
+    self.assertEqual(3, loaded_dict['recovery_api_version'])
+    self.assertEqual(2, loaded_dict['fstab_version'])
+    self.assertIn('/', loaded_dict['fstab'])
+    self.assertIn('/system', loaded_dict['fstab'])
+
+  def test_LoadInfoDict_systemRootImageFalse(self):
+    # Devices not using system-as-root nor recovery-as-boot. Non-A/B devices
+    # launched prior to P will likely have this config.
+    info_dict = copy.copy(self.INFO_DICT_DEFAULT)
+    del info_dict['no_recovery']
+    del info_dict['system_root_image']
+    del info_dict['recovery_as_boot']
+    target_files = self._test_LoadInfoDict_createTargetFiles(
+        info_dict,
+        'RECOVERY/RAMDISK/system/etc/recovery.fstab')
+    with zipfile.ZipFile(target_files, 'r') as target_files_zip:
+      loaded_dict = common.LoadInfoDict(target_files_zip)
+      self.assertEqual(3, loaded_dict['recovery_api_version'])
+      self.assertEqual(2, loaded_dict['fstab_version'])
+      self.assertNotIn('/', loaded_dict['fstab'])
+      self.assertIn('/system', loaded_dict['fstab'])
+
+  def test_LoadInfoDict_recoveryAsBootFalse(self):
+    # Devices using system-as-root, but with standalone recovery image. Non-A/B
+    # devices launched since P will likely have this config.
+    info_dict = copy.copy(self.INFO_DICT_DEFAULT)
+    del info_dict['no_recovery']
+    del info_dict['recovery_as_boot']
+    target_files = self._test_LoadInfoDict_createTargetFiles(
+        info_dict,
+        'RECOVERY/RAMDISK/system/etc/recovery.fstab')
+    with zipfile.ZipFile(target_files, 'r') as target_files_zip:
+      loaded_dict = common.LoadInfoDict(target_files_zip)
+      self.assertEqual(3, loaded_dict['recovery_api_version'])
+      self.assertEqual(2, loaded_dict['fstab_version'])
+      self.assertIn('/', loaded_dict['fstab'])
+      self.assertIn('/system', loaded_dict['fstab'])
+
+  def test_LoadInfoDict_noRecoveryTrue(self):
+    # Device doesn't have a recovery partition at all.
+    info_dict = copy.copy(self.INFO_DICT_DEFAULT)
+    del info_dict['recovery_as_boot']
+    target_files = self._test_LoadInfoDict_createTargetFiles(
+        info_dict,
+        'RECOVERY/RAMDISK/system/etc/recovery.fstab')
+    with zipfile.ZipFile(target_files, 'r') as target_files_zip:
+      loaded_dict = common.LoadInfoDict(target_files_zip)
+      self.assertEqual(3, loaded_dict['recovery_api_version'])
+      self.assertEqual(2, loaded_dict['fstab_version'])
+      self.assertIsNone(loaded_dict['fstab'])
+
+  def test_LoadInfoDict_missingMetaMiscInfoTxt(self):
+    target_files = self._test_LoadInfoDict_createTargetFiles(
+        self.INFO_DICT_DEFAULT,
+        'BOOT/RAMDISK/system/etc/recovery.fstab')
+    common.ZipDelete(target_files, 'META/misc_info.txt')
+    with zipfile.ZipFile(target_files, 'r') as target_files_zip:
+      self.assertRaises(ValueError, common.LoadInfoDict, target_files_zip)
+
+  def test_LoadInfoDict_repacking(self):
+    target_files = self._test_LoadInfoDict_createTargetFiles(
+        self.INFO_DICT_DEFAULT,
+        'BOOT/RAMDISK/system/etc/recovery.fstab')
+    unzipped = common.UnzipTemp(target_files)
+    loaded_dict = common.LoadInfoDict(unzipped, True)
+    self.assertEqual(3, loaded_dict['recovery_api_version'])
+    self.assertEqual(2, loaded_dict['fstab_version'])
+    self.assertIn('/', loaded_dict['fstab'])
+    self.assertIn('/system', loaded_dict['fstab'])
+    self.assertEqual(
+        os.path.join(unzipped, 'ROOT'), loaded_dict['root_dir'])
+    self.assertEqual(
+        os.path.join(unzipped, 'META', 'root_filesystem_config.txt'),
+        loaded_dict['root_fs_config'])
+
+  def test_LoadInfoDict_repackingWithZipFileInput(self):
+    target_files = self._test_LoadInfoDict_createTargetFiles(
+        self.INFO_DICT_DEFAULT,
+        'BOOT/RAMDISK/system/etc/recovery.fstab')
+    with zipfile.ZipFile(target_files, 'r') as target_files_zip:
+      self.assertRaises(
+          AssertionError, common.LoadInfoDict, target_files_zip, True)
+
+
+class InstallRecoveryScriptFormatTest(test_utils.ReleaseToolsTestCase):
   """Checks the format of install-recovery.sh.
 
   Its format should match between common.py and validate_target_files.py.
@@ -705,6 +988,3 @@
                              recovery_image, boot_image, self._info)
     validate_target_files.ValidateInstallRecoveryScript(self._tempdir,
                                                         self._info)
-
-  def tearDown(self):
-    common.Cleanup()
diff --git a/tools/releasetools/test_ota_from_target_files.py b/tools/releasetools/test_ota_from_target_files.py
index 262e701..44703db 100644
--- a/tools/releasetools/test_ota_from_target_files.py
+++ b/tools/releasetools/test_ota_from_target_files.py
@@ -17,8 +17,6 @@
 import copy
 import os
 import os.path
-import subprocess
-import unittest
 import zipfile
 
 import common
@@ -50,17 +48,25 @@
             "POSTINSTALL_OPTIONAL_system=true",
         ]))
 
+    ab_partitions = [
+        ('IMAGES', 'boot'),
+        ('IMAGES', 'system'),
+        ('IMAGES', 'vendor'),
+        ('RADIO', 'bootloader'),
+        ('RADIO', 'modem'),
+    ]
     # META/ab_partitions.txt
-    ab_partitions = ['boot', 'system', 'vendor']
     target_files_zip.writestr(
         'META/ab_partitions.txt',
-        '\n'.join(ab_partitions))
+        '\n'.join([partition[1] for partition in ab_partitions]))
 
     # Create dummy images for each of them.
-    for partition in ab_partitions:
-      target_files_zip.writestr('IMAGES/' + partition + '.img',
-                                os.urandom(len(partition)))
+    for path, partition in ab_partitions:
+      target_files_zip.writestr(
+          '{}/{}.img'.format(path, partition),
+          os.urandom(len(partition)))
 
+    # system_other shouldn't appear in META/ab_partitions.txt.
     if secondary:
       target_files_zip.writestr('IMAGES/system_other.img',
                                 os.urandom(len("system_other")))
@@ -97,7 +103,7 @@
     self.script.append(('AssertSomeThumbprint',) + args)
 
 
-class BuildInfoTest(unittest.TestCase):
+class BuildInfoTest(test_utils.ReleaseToolsTestCase):
 
   TEST_INFO_DICT = {
       'build.prop' : {
@@ -182,6 +188,16 @@
     self.assertRaises(KeyError,
                       lambda: target_info['build.prop']['ro.build.foo'])
 
+  def test___setitem__(self):
+    target_info = BuildInfo(copy.deepcopy(self.TEST_INFO_DICT), None)
+    self.assertEqual('value1', target_info['property1'])
+    target_info['property1'] = 'value2'
+    self.assertEqual('value2', target_info['property1'])
+
+    self.assertEqual('build-foo', target_info['build.prop']['ro.build.foo'])
+    target_info['build.prop']['ro.build.foo'] = 'build-bar'
+    self.assertEqual('build-bar', target_info['build.prop']['ro.build.foo'])
+
   def test_get(self):
     target_info = BuildInfo(self.TEST_INFO_DICT, None)
     self.assertEqual('value1', target_info.get('property1'))
@@ -201,6 +217,12 @@
     self.assertRaises(KeyError,
                       lambda: target_info.get('build.prop')['ro.build.foo'])
 
+  def test_items(self):
+    target_info = BuildInfo(self.TEST_INFO_DICT, None)
+    items = target_info.items()
+    self.assertIn(('property1', 'value1'), items)
+    self.assertIn(('property2', 4096), items)
+
   def test_GetBuildProp(self):
     target_info = BuildInfo(self.TEST_INFO_DICT, None)
     self.assertEqual('build-foo', target_info.GetBuildProp('ro.build.foo'))
@@ -231,6 +253,23 @@
     self.assertRaises(common.ExternalError, target_info.GetVendorBuildProp,
                       'ro.build.nonexistent')
 
+  def test_vendor_fingerprint(self):
+    target_info = BuildInfo(self.TEST_INFO_DICT, None)
+    self.assertEqual('vendor-build-fingerprint',
+                     target_info.vendor_fingerprint)
+
+  def test_vendor_fingerprint_blacklisted(self):
+    target_info_dict = copy.deepcopy(self.TEST_INFO_DICT_USES_OEM_PROPS)
+    del target_info_dict['vendor.build.prop']['ro.vendor.build.fingerprint']
+    target_info = BuildInfo(target_info_dict, self.TEST_OEM_DICTS)
+    self.assertIsNone(target_info.vendor_fingerprint)
+
+  def test_vendor_fingerprint_without_vendor_build_prop(self):
+    target_info_dict = copy.deepcopy(self.TEST_INFO_DICT_USES_OEM_PROPS)
+    del target_info_dict['vendor.build.prop']
+    target_info = BuildInfo(target_info_dict, self.TEST_OEM_DICTS)
+    self.assertIsNone(target_info.vendor_fingerprint)
+
   def test_WriteMountOemScript(self):
     target_info = BuildInfo(self.TEST_INFO_DICT_USES_OEM_PROPS,
                             self.TEST_OEM_DICTS)
@@ -312,10 +351,7 @@
         script_writer.script)
 
 
-class LoadOemDictsTest(unittest.TestCase):
-
-  def tearDown(self):
-    common.Cleanup()
+class LoadOemDictsTest(test_utils.ReleaseToolsTestCase):
 
   def test_NoneDict(self):
     self.assertIsNone(_LoadOemDicts(None))
@@ -348,7 +384,7 @@
       self.assertEqual('{}'.format(i), oem_dict['ro.build.index'])
 
 
-class OtaFromTargetFilesTest(unittest.TestCase):
+class OtaFromTargetFilesTest(test_utils.ReleaseToolsTestCase):
 
   TEST_TARGET_INFO_DICT = {
       'build.prop' : {
@@ -390,9 +426,6 @@
     common.OPTIONS.search_path = test_utils.get_search_path()
     self.assertIsNotNone(common.OPTIONS.search_path)
 
-  def tearDown(self):
-    common.Cleanup()
-
   def test_GetPackageMetadata_abOta_full(self):
     target_info_dict = copy.deepcopy(self.TEST_TARGET_INFO_DICT)
     target_info_dict['ab_update'] = 'true'
@@ -542,6 +575,8 @@
     self.assertIn('IMAGES/boot.img', namelist)
     self.assertIn('IMAGES/system.img', namelist)
     self.assertIn('IMAGES/vendor.img', namelist)
+    self.assertIn('RADIO/bootloader.img', namelist)
+    self.assertIn('RADIO/modem.img', namelist)
     self.assertIn(POSTINSTALL_CONFIG, namelist)
 
     self.assertNotIn('IMAGES/system_other.img', namelist)
@@ -559,11 +594,33 @@
     self.assertIn('IMAGES/boot.img', namelist)
     self.assertIn('IMAGES/system.img', namelist)
     self.assertIn('IMAGES/vendor.img', namelist)
+    self.assertIn('RADIO/bootloader.img', namelist)
+    self.assertIn('RADIO/modem.img', namelist)
 
     self.assertNotIn('IMAGES/system_other.img', namelist)
     self.assertNotIn('IMAGES/system.map', namelist)
     self.assertNotIn(POSTINSTALL_CONFIG, namelist)
 
+  def test_GetTargetFilesZipForSecondaryImages_withoutRadioImages(self):
+    input_file = construct_target_files(secondary=True)
+    common.ZipDelete(input_file, 'RADIO/bootloader.img')
+    common.ZipDelete(input_file, 'RADIO/modem.img')
+    target_file = GetTargetFilesZipForSecondaryImages(input_file)
+
+    with zipfile.ZipFile(target_file) as verify_zip:
+      namelist = verify_zip.namelist()
+
+    self.assertIn('META/ab_partitions.txt', namelist)
+    self.assertIn('IMAGES/boot.img', namelist)
+    self.assertIn('IMAGES/system.img', namelist)
+    self.assertIn('IMAGES/vendor.img', namelist)
+    self.assertIn(POSTINSTALL_CONFIG, namelist)
+
+    self.assertNotIn('IMAGES/system_other.img', namelist)
+    self.assertNotIn('IMAGES/system.map', namelist)
+    self.assertNotIn('RADIO/bootloader.img', namelist)
+    self.assertNotIn('RADIO/modem.img', namelist)
+
   def test_GetTargetFilesZipWithoutPostinstallConfig(self):
     input_file = construct_target_files()
     target_file = GetTargetFilesZipWithoutPostinstallConfig(input_file)
@@ -656,14 +713,11 @@
     )
 
 
-class PropertyFilesTest(unittest.TestCase):
+class PropertyFilesTest(test_utils.ReleaseToolsTestCase):
 
   def setUp(self):
     common.OPTIONS.no_signing = False
 
-  def tearDown(self):
-    common.Cleanup()
-
   @staticmethod
   def construct_zip_package(entries):
     zip_file = common.MakeTempFile(suffix='.zip')
@@ -742,8 +796,7 @@
     zip_file = self.construct_zip_package(entries)
     property_files = TestPropertyFiles()
     with zipfile.ZipFile(zip_file, 'r') as zip_fp:
-      # pylint: disable=protected-access
-      raw_metadata = property_files._GetPropertyFilesString(
+      raw_metadata = property_files.GetPropertyFilesString(
           zip_fp, reserve_space=False)
       streaming_metadata = property_files.Finalize(zip_fp, len(raw_metadata))
     tokens = self._parse_property_files_string(streaming_metadata)
@@ -766,8 +819,7 @@
     property_files = TestPropertyFiles()
     with zipfile.ZipFile(zip_file, 'r') as zip_fp:
       # First get the raw metadata string (i.e. without padding space).
-      # pylint: disable=protected-access
-      raw_metadata = property_files._GetPropertyFilesString(
+      raw_metadata = property_files.GetPropertyFilesString(
           zip_fp, reserve_space=False)
       raw_length = len(raw_metadata)
 
@@ -801,8 +853,7 @@
     property_files = TestPropertyFiles()
     with zipfile.ZipFile(zip_file, 'r') as zip_fp:
       # First get the raw metadata string (i.e. without padding space).
-      # pylint: disable=protected-access
-      raw_metadata = property_files._GetPropertyFilesString(
+      raw_metadata = property_files.GetPropertyFilesString(
           zip_fp, reserve_space=False)
 
       # Should pass the test if verification passes.
@@ -827,6 +878,7 @@
         property_files.required)
     self.assertEqual(
         (
+            'care_map.pb',
             'care_map.txt',
             'compatibility.zip',
         ),
@@ -859,8 +911,7 @@
     zip_file = self.construct_zip_package(entries)
     property_files = StreamingPropertyFiles()
     with zipfile.ZipFile(zip_file, 'r') as zip_fp:
-      # pylint: disable=protected-access
-      raw_metadata = property_files._GetPropertyFilesString(
+      raw_metadata = property_files.GetPropertyFilesString(
           zip_fp, reserve_space=False)
       streaming_metadata = property_files.Finalize(zip_fp, len(raw_metadata))
     tokens = self._parse_property_files_string(streaming_metadata)
@@ -883,8 +934,7 @@
     property_files = StreamingPropertyFiles()
     with zipfile.ZipFile(zip_file, 'r') as zip_fp:
       # First get the raw metadata string (i.e. without padding space).
-      # pylint: disable=protected-access
-      raw_metadata = property_files._GetPropertyFilesString(
+      raw_metadata = property_files.GetPropertyFilesString(
           zip_fp, reserve_space=False)
 
       # Should pass the test if verification passes.
@@ -924,6 +974,7 @@
         property_files.required)
     self.assertEqual(
         (
+            'care_map.pb',
             'care_map.txt',
             'compatibility.zip',
         ),
@@ -962,11 +1013,11 @@
            '--signature_size', str(self.SIGNATURE_SIZE),
            '--metadata_hash_file', metadata_sig_file,
            '--payload_hash_file', payload_sig_file]
-    proc = common.Run(cmd, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
+    proc = common.Run(cmd)
     stdoutdata, _ = proc.communicate()
     self.assertEqual(
         0, proc.returncode,
-        'Failed to run brillo_update_payload: {}'.format(stdoutdata))
+        'Failed to run brillo_update_payload:\n{}'.format(stdoutdata))
 
     signed_metadata_sig_file = payload_signer.Sign(metadata_sig_file)
 
@@ -1019,8 +1070,7 @@
     zip_file = self.construct_zip_package_withValidPayload(with_metadata=True)
     property_files = AbOtaPropertyFiles()
     with zipfile.ZipFile(zip_file, 'r') as zip_fp:
-      # pylint: disable=protected-access
-      raw_metadata = property_files._GetPropertyFilesString(
+      raw_metadata = property_files.GetPropertyFilesString(
           zip_fp, reserve_space=False)
       property_files_string = property_files.Finalize(zip_fp, len(raw_metadata))
 
@@ -1035,8 +1085,7 @@
     zip_file = self.construct_zip_package_withValidPayload(with_metadata=True)
     property_files = AbOtaPropertyFiles()
     with zipfile.ZipFile(zip_file, 'r') as zip_fp:
-      # pylint: disable=protected-access
-      raw_metadata = property_files._GetPropertyFilesString(
+      raw_metadata = property_files.GetPropertyFilesString(
           zip_fp, reserve_space=False)
 
       property_files.Verify(zip_fp, raw_metadata)
@@ -1069,8 +1118,7 @@
     zip_file = self.construct_zip_package(entries)
     property_files = NonAbOtaPropertyFiles()
     with zipfile.ZipFile(zip_file) as zip_fp:
-      # pylint: disable=protected-access
-      raw_metadata = property_files._GetPropertyFilesString(
+      raw_metadata = property_files.GetPropertyFilesString(
           zip_fp, reserve_space=False)
       property_files_string = property_files.Finalize(zip_fp, len(raw_metadata))
     tokens = self._parse_property_files_string(property_files_string)
@@ -1087,14 +1135,13 @@
     zip_file = self.construct_zip_package(entries)
     property_files = NonAbOtaPropertyFiles()
     with zipfile.ZipFile(zip_file) as zip_fp:
-      # pylint: disable=protected-access
-      raw_metadata = property_files._GetPropertyFilesString(
+      raw_metadata = property_files.GetPropertyFilesString(
           zip_fp, reserve_space=False)
 
       property_files.Verify(zip_fp, raw_metadata)
 
 
-class PayloadSignerTest(unittest.TestCase):
+class PayloadSignerTest(test_utils.ReleaseToolsTestCase):
 
   SIGFILE = 'sigfile.bin'
   SIGNED_SIGFILE = 'signed-sigfile.bin'
@@ -1110,9 +1157,6 @@
         common.OPTIONS.package_key : None,
     }
 
-  def tearDown(self):
-    common.Cleanup()
-
   def _assertFilesEqual(self, file1, file2):
     with open(file1, 'rb') as fp1, open(file2, 'rb') as fp2:
       self.assertEqual(fp1.read(), fp2.read())
@@ -1173,7 +1217,7 @@
     self._assertFilesEqual(verify_file, signed_file)
 
 
-class PayloadTest(unittest.TestCase):
+class PayloadTest(test_utils.ReleaseToolsTestCase):
 
   def setUp(self):
     self.testdata_dir = test_utils.get_testdata_dir()
@@ -1187,9 +1231,6 @@
         common.OPTIONS.package_key : None,
     }
 
-  def tearDown(self):
-    common.Cleanup()
-
   @staticmethod
   def _create_payload_full(secondary=False):
     target_file = construct_target_files(secondary)
@@ -1227,7 +1268,7 @@
     target_file = construct_target_files()
     common.ZipDelete(target_file, 'IMAGES/vendor.img')
     payload = Payload()
-    self.assertRaises(AssertionError, payload.Generate, target_file)
+    self.assertRaises(common.ExternalError, payload.Generate, target_file)
 
   def test_Sign_full(self):
     payload = self._create_payload_full()
@@ -1275,7 +1316,7 @@
     payload = self._create_payload_full()
     payload_signer = PayloadSigner()
     payload_signer.signer_args.append('bad-option')
-    self.assertRaises(AssertionError, payload.Sign, payload_signer)
+    self.assertRaises(common.ExternalError, payload.Sign, payload_signer)
 
   def test_WriteToZip(self):
     payload = self._create_payload_full()
diff --git a/tools/releasetools/test_rangelib.py b/tools/releasetools/test_rangelib.py
index e181187..1251e11 100644
--- a/tools/releasetools/test_rangelib.py
+++ b/tools/releasetools/test_rangelib.py
@@ -14,11 +14,11 @@
 # limitations under the License.
 #
 
-import unittest
-
 from rangelib import RangeSet
+from test_utils import ReleaseToolsTestCase
 
-class RangeSetTest(unittest.TestCase):
+
+class RangeSetTest(ReleaseToolsTestCase):
 
   def test_union(self):
     self.assertEqual(RangeSet("10-19 30-34").union(RangeSet("18-29")),
@@ -129,8 +129,8 @@
     self.assertEqual(
         RangeSet.parse_raw(RangeSet("0-9").to_string_raw()),
         RangeSet("0-9"))
-    self.assertEqual(RangeSet.parse_raw(
-        RangeSet("2-10 12").to_string_raw()),
+    self.assertEqual(
+        RangeSet.parse_raw(RangeSet("2-10 12").to_string_raw()),
         RangeSet("2-10 12"))
     self.assertEqual(
         RangeSet.parse_raw(RangeSet("11 2-10 12 1 0").to_string_raw()),
diff --git a/tools/releasetools/test_sign_target_files_apks.py b/tools/releasetools/test_sign_target_files_apks.py
index 26f9e10..18762ee 100644
--- a/tools/releasetools/test_sign_target_files_apks.py
+++ b/tools/releasetools/test_sign_target_files_apks.py
@@ -14,20 +14,18 @@
 # limitations under the License.
 #
 
-from __future__ import print_function
-
 import base64
 import os.path
-import unittest
 import zipfile
 
 import common
 import test_utils
 from sign_target_files_apks import (
-    EditTags, ReplaceCerts, ReplaceVerityKeyId, RewriteProps)
+    CheckAllApksSigned, EditTags, GetApkFileInfo, ReplaceCerts,
+    ReplaceVerityKeyId, RewriteProps)
 
 
-class SignTargetFilesApksTest(unittest.TestCase):
+class SignTargetFilesApksTest(test_utils.ReleaseToolsTestCase):
 
   MAC_PERMISSIONS_XML = """<?xml version="1.0" encoding="iso-8859-1"?>
 <policy>
@@ -38,9 +36,6 @@
   def setUp(self):
     self.testdata_dir = test_utils.get_testdata_dir()
 
-  def tearDown(self):
-    common.Cleanup()
-
   def test_EditTags(self):
     self.assertEqual(EditTags('dev-keys'), ('release-keys'))
     self.assertEqual(EditTags('test-keys'), ('release-keys'))
@@ -211,3 +206,141 @@
         cert2_path[:-9] : 'non-existent',
     }
     self.assertEqual(output_xml, ReplaceCerts(input_xml))
+
+  def test_CheckAllApksSigned(self):
+    input_file = common.MakeTempFile(suffix='.zip')
+    with zipfile.ZipFile(input_file, 'w') as input_zip:
+      input_zip.writestr('SYSTEM/app/App1.apk', "App1-content")
+      input_zip.writestr('SYSTEM/app/App2.apk.gz', "App2-content")
+
+    apk_key_map = {
+        'App1.apk' : 'key1',
+        'App2.apk' : 'key2',
+        'App3.apk' : 'key3',
+    }
+    with zipfile.ZipFile(input_file) as input_zip:
+      CheckAllApksSigned(input_zip, apk_key_map, None)
+      CheckAllApksSigned(input_zip, apk_key_map, '.gz')
+
+      # 'App2.apk.gz' won't be considered as an APK.
+      CheckAllApksSigned(input_zip, apk_key_map, None)
+      CheckAllApksSigned(input_zip, apk_key_map, '.xz')
+
+      del apk_key_map['App2.apk']
+      self.assertRaises(
+          AssertionError, CheckAllApksSigned, input_zip, apk_key_map, '.gz')
+
+  def test_GetApkFileInfo(self):
+    (is_apk, is_compressed, should_be_skipped) = GetApkFileInfo(
+        "PRODUCT/apps/Chats.apk", None, [])
+    self.assertTrue(is_apk)
+    self.assertFalse(is_compressed)
+    self.assertFalse(should_be_skipped)
+
+    (is_apk, is_compressed, should_be_skipped) = GetApkFileInfo(
+        "PRODUCT/apps/Chats.apk", None, [])
+    self.assertTrue(is_apk)
+    self.assertFalse(is_compressed)
+    self.assertFalse(should_be_skipped)
+
+    (is_apk, is_compressed, should_be_skipped) = GetApkFileInfo(
+        "PRODUCT/apps/Chats.dat", None, [])
+    self.assertFalse(is_apk)
+    self.assertFalse(is_compressed)
+    self.assertFalse(should_be_skipped)
+
+  def test_GetApkFileInfo_withCompressedApks(self):
+    (is_apk, is_compressed, should_be_skipped) = GetApkFileInfo(
+        "PRODUCT/apps/Chats.apk.gz", ".gz", [])
+    self.assertTrue(is_apk)
+    self.assertTrue(is_compressed)
+    self.assertFalse(should_be_skipped)
+
+    (is_apk, is_compressed, should_be_skipped) = GetApkFileInfo(
+        "PRODUCT/apps/Chats.apk.gz", ".xz", [])
+    self.assertFalse(is_apk)
+    self.assertFalse(is_compressed)
+    self.assertFalse(should_be_skipped)
+
+    self.assertRaises(
+        AssertionError, GetApkFileInfo, "PRODUCT/apps/Chats.apk", "", [])
+
+    self.assertRaises(
+        AssertionError, GetApkFileInfo, "PRODUCT/apps/Chats.apk", "apk", [])
+
+  def test_GetApkFileInfo_withSkippedPrefixes(self):
+    (is_apk, is_compressed, should_be_skipped) = GetApkFileInfo(
+        "PRODUCT/preloads/apps/Chats.apk", None, set())
+    self.assertTrue(is_apk)
+    self.assertFalse(is_compressed)
+    self.assertFalse(should_be_skipped)
+
+    (is_apk, is_compressed, should_be_skipped) = GetApkFileInfo(
+        "PRODUCT/preloads/apps/Chats.apk",
+        None,
+        set(["PRODUCT/preloads/"]))
+    self.assertTrue(is_apk)
+    self.assertFalse(is_compressed)
+    self.assertTrue(should_be_skipped)
+
+    (is_apk, is_compressed, should_be_skipped) = GetApkFileInfo(
+        "SYSTEM_OTHER/preloads/apps/Chats.apk",
+        None,
+        set(["SYSTEM/preloads/", "SYSTEM_OTHER/preloads/"]))
+    self.assertTrue(is_apk)
+    self.assertFalse(is_compressed)
+    self.assertTrue(should_be_skipped)
+
+    (is_apk, is_compressed, should_be_skipped) = GetApkFileInfo(
+        "SYSTEM_OTHER/preloads/apps/Chats.apk.gz",
+        ".gz",
+        set(["PRODUCT/prebuilts/", "SYSTEM_OTHER/preloads/"]))
+    self.assertTrue(is_apk)
+    self.assertTrue(is_compressed)
+    self.assertTrue(should_be_skipped)
+
+    (is_apk, is_compressed, should_be_skipped) = GetApkFileInfo(
+        "SYSTEM_OTHER/preloads/apps/Chats.dat",
+        None,
+        set(["SYSTEM_OTHER/preloads/"]))
+    self.assertFalse(is_apk)
+    self.assertFalse(is_compressed)
+    self.assertFalse(should_be_skipped)
+
+  def test_GetApkFileInfo_checkSkippedPrefixesInput(self):
+    # set
+    (is_apk, is_compressed, should_be_skipped) = GetApkFileInfo(
+        "SYSTEM_OTHER/preloads/apps/Chats.apk",
+        None,
+        set(["SYSTEM_OTHER/preloads/"]))
+    self.assertTrue(is_apk)
+    self.assertFalse(is_compressed)
+    self.assertTrue(should_be_skipped)
+
+    # tuple
+    (is_apk, is_compressed, should_be_skipped) = GetApkFileInfo(
+        "SYSTEM_OTHER/preloads/apps/Chats.apk",
+        None,
+        ("SYSTEM_OTHER/preloads/",))
+    self.assertTrue(is_apk)
+    self.assertFalse(is_compressed)
+    self.assertTrue(should_be_skipped)
+
+    # list
+    (is_apk, is_compressed, should_be_skipped) = GetApkFileInfo(
+        "SYSTEM_OTHER/preloads/apps/Chats.apk",
+        None,
+        ["SYSTEM_OTHER/preloads/"])
+    self.assertTrue(is_apk)
+    self.assertFalse(is_compressed)
+    self.assertTrue(should_be_skipped)
+
+    # str is invalid.
+    self.assertRaises(
+        AssertionError, GetApkFileInfo, "SYSTEM_OTHER/preloads/apps/Chats.apk",
+        None, "SYSTEM_OTHER/preloads/")
+
+    # None is invalid.
+    self.assertRaises(
+        AssertionError, GetApkFileInfo, "SYSTEM_OTHER/preloads/apps/Chats.apk",
+        None, None)
diff --git a/tools/releasetools/test_utils.py b/tools/releasetools/test_utils.py
index a15ff5b..edb3d41 100644
--- a/tools/releasetools/test_utils.py
+++ b/tools/releasetools/test_utils.py
@@ -18,12 +18,18 @@
 Utils for running unittests.
 """
 
+import logging
 import os
 import os.path
 import struct
+import sys
+import unittest
 
 import common
 
+# Some test runner doesn't like outputs from stderr.
+logging.basicConfig(stream=sys.stdout)
+
 
 def get_testdata_dir():
   """Returns the testdata dir, in relative to the script dir."""
@@ -110,3 +116,10 @@
         fp.write(os.urandom(data_size))
 
   return sparse_image
+
+
+class ReleaseToolsTestCase(unittest.TestCase):
+  """A common base class for all the releasetools unittests."""
+
+  def tearDown(self):
+    common.Cleanup()
diff --git a/tools/releasetools/test_validate_target_files.py b/tools/releasetools/test_validate_target_files.py
new file mode 100644
index 0000000..a6a8876
--- /dev/null
+++ b/tools/releasetools/test_validate_target_files.py
@@ -0,0 +1,157 @@
+#
+# Copyright (C) 2018 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+"""Unittests for validate_target_files.py."""
+
+import os
+import os.path
+import shutil
+
+import common
+import test_utils
+import verity_utils
+from validate_target_files import ValidateVerifiedBootImages
+from verity_utils import CreateVerityImageBuilder
+
+
+class ValidateTargetFilesTest(test_utils.ReleaseToolsTestCase):
+
+  def setUp(self):
+    self.testdata_dir = test_utils.get_testdata_dir()
+
+  def _generate_boot_image(self, output_file):
+    kernel = common.MakeTempFile(prefix='kernel-')
+    with open(kernel, 'wb') as kernel_fp:
+      kernel_fp.write(os.urandom(10))
+
+    cmd = ['mkbootimg', '--kernel', kernel, '-o', output_file]
+    proc = common.Run(cmd)
+    stdoutdata, _ = proc.communicate()
+    self.assertEqual(
+        0, proc.returncode,
+        "Failed to run mkbootimg: {}".format(stdoutdata))
+
+    cmd = ['boot_signer', '/boot', output_file,
+           os.path.join(self.testdata_dir, 'testkey.pk8'),
+           os.path.join(self.testdata_dir, 'testkey.x509.pem'), output_file]
+    proc = common.Run(cmd)
+    stdoutdata, _ = proc.communicate()
+    self.assertEqual(
+        0, proc.returncode,
+        "Failed to sign boot image with boot_signer: {}".format(stdoutdata))
+
+  def test_ValidateVerifiedBootImages_bootImage(self):
+    input_tmp = common.MakeTempDir()
+    os.mkdir(os.path.join(input_tmp, 'IMAGES'))
+    boot_image = os.path.join(input_tmp, 'IMAGES', 'boot.img')
+    self._generate_boot_image(boot_image)
+
+    info_dict = {
+        'boot_signer' : 'true',
+    }
+    options = {
+        'verity_key' : os.path.join(self.testdata_dir, 'testkey.x509.pem'),
+    }
+    ValidateVerifiedBootImages(input_tmp, info_dict, options)
+
+  def test_ValidateVerifiedBootImages_bootImage_wrongKey(self):
+    input_tmp = common.MakeTempDir()
+    os.mkdir(os.path.join(input_tmp, 'IMAGES'))
+    boot_image = os.path.join(input_tmp, 'IMAGES', 'boot.img')
+    self._generate_boot_image(boot_image)
+
+    info_dict = {
+        'boot_signer' : 'true',
+    }
+    options = {
+        'verity_key' : os.path.join(self.testdata_dir, 'verity.x509.pem'),
+    }
+    self.assertRaises(
+        AssertionError, ValidateVerifiedBootImages, input_tmp, info_dict,
+        options)
+
+  def test_ValidateVerifiedBootImages_bootImage_corrupted(self):
+    input_tmp = common.MakeTempDir()
+    os.mkdir(os.path.join(input_tmp, 'IMAGES'))
+    boot_image = os.path.join(input_tmp, 'IMAGES', 'boot.img')
+    self._generate_boot_image(boot_image)
+
+    # Corrupt the late byte of the image.
+    with open(boot_image, 'r+b') as boot_fp:
+      boot_fp.seek(-1, os.SEEK_END)
+      last_byte = boot_fp.read(1)
+      last_byte = chr(255 - ord(last_byte))
+      boot_fp.seek(-1, os.SEEK_END)
+      boot_fp.write(last_byte)
+
+    info_dict = {
+        'boot_signer' : 'true',
+    }
+    options = {
+        'verity_key' : os.path.join(self.testdata_dir, 'testkey.x509.pem'),
+    }
+    self.assertRaises(
+        AssertionError, ValidateVerifiedBootImages, input_tmp, info_dict,
+        options)
+
+  def _generate_system_image(self, output_file):
+    prop_dict = {
+        'partition_size': str(1024 * 1024),
+        'verity': 'true',
+        'verity_block_device': '/dev/block/system',
+        'verity_key' : os.path.join(self.testdata_dir, 'testkey'),
+        'verity_fec': "true",
+        'verity_signer_cmd': 'verity_signer',
+    }
+    verity_image_builder = CreateVerityImageBuilder(prop_dict)
+    image_size = verity_image_builder.CalculateMaxImageSize()
+
+    # Use an empty root directory.
+    system_root = common.MakeTempDir()
+    cmd = ['mkuserimg_mke2fs', '-s', system_root, output_file, 'ext4',
+           '/system', str(image_size), '-j', '0']
+    proc = common.Run(cmd)
+    stdoutdata, _ = proc.communicate()
+    self.assertEqual(
+        0, proc.returncode,
+        "Failed to create system image with mkuserimg_mke2fs: {}".format(
+            stdoutdata))
+
+    # Append the verity metadata.
+    verity_image_builder.Build(output_file)
+
+  def test_ValidateVerifiedBootImages_systemImage(self):
+    input_tmp = common.MakeTempDir()
+    os.mkdir(os.path.join(input_tmp, 'IMAGES'))
+    system_image = os.path.join(input_tmp, 'IMAGES', 'system.img')
+    self._generate_system_image(system_image)
+
+    # Pack the verity key.
+    verity_key_mincrypt = os.path.join(
+        input_tmp, 'BOOT', 'RAMDISK', 'verity_key')
+    os.makedirs(os.path.dirname(verity_key_mincrypt))
+    shutil.copyfile(
+        os.path.join(self.testdata_dir, 'testkey_mincrypt'),
+        verity_key_mincrypt)
+
+    info_dict = {
+        'verity' : 'true',
+    }
+    options = {
+        'verity_key' : os.path.join(self.testdata_dir, 'testkey.x509.pem'),
+        'verity_key_mincrypt' : verity_key_mincrypt,
+    }
+    ValidateVerifiedBootImages(input_tmp, info_dict, options)
diff --git a/tools/releasetools/test_verity_utils.py b/tools/releasetools/test_verity_utils.py
new file mode 100644
index 0000000..e0607c8
--- /dev/null
+++ b/tools/releasetools/test_verity_utils.py
@@ -0,0 +1,380 @@
+#
+# Copyright (C) 2018 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+"""Unittests for verity_utils.py."""
+
+import copy
+import math
+import os.path
+import random
+
+import common
+import sparse_img
+from rangelib import RangeSet
+from test_utils import get_testdata_dir, ReleaseToolsTestCase
+from verity_utils import (
+    CreateHashtreeInfoGenerator, CreateVerityImageBuilder, HashtreeInfo,
+    VerifiedBootVersion1HashtreeInfoGenerator)
+
+BLOCK_SIZE = common.BLOCK_SIZE
+
+
+class VerifiedBootVersion1HashtreeInfoGeneratorTest(ReleaseToolsTestCase):
+
+  def setUp(self):
+    self.testdata_dir = get_testdata_dir()
+
+    self.partition_size = 1024 * 1024
+    self.prop_dict = {
+        'verity': 'true',
+        'verity_fec': 'true',
+        'system_verity_block_device': '/dev/block/system',
+        'system_size': self.partition_size
+    }
+
+    self.hash_algorithm = "sha256"
+    self.fixed_salt = \
+        "aee087a5be3b982978c923f566a94613496b417f2af592639bc80d141e34dfe7"
+    self.expected_root_hash = \
+        "0b7c4565e87b1026e11fbab91c0bc29e185c847a5b44d40e6e86e461e8adf80d"
+
+  def _create_simg(self, raw_data):
+    output_file = common.MakeTempFile()
+    raw_image = common.MakeTempFile()
+    with open(raw_image, 'wb') as f:
+      f.write(raw_data)
+
+    cmd = ["img2simg", raw_image, output_file, '4096']
+    p = common.Run(cmd)
+    p.communicate()
+    self.assertEqual(0, p.returncode)
+
+    return output_file
+
+  def _generate_image(self):
+    partition_size = 1024 * 1024
+    prop_dict = {
+        'partition_size': str(partition_size),
+        'verity': 'true',
+        'verity_block_device': '/dev/block/system',
+        'verity_key': os.path.join(self.testdata_dir, 'testkey'),
+        'verity_fec': 'true',
+        'verity_signer_cmd': 'verity_signer',
+    }
+    verity_image_builder = CreateVerityImageBuilder(prop_dict)
+    self.assertIsNotNone(verity_image_builder)
+    adjusted_size = verity_image_builder.CalculateMaxImageSize()
+
+    raw_image = ""
+    for i in range(adjusted_size):
+      raw_image += str(i % 10)
+
+    output_file = self._create_simg(raw_image)
+
+    # Append the verity metadata.
+    verity_image_builder.Build(output_file)
+
+    return output_file
+
+  def test_CreateHashtreeInfoGenerator(self):
+    image_file = sparse_img.SparseImage(self._generate_image())
+
+    generator = CreateHashtreeInfoGenerator(
+        'system', image_file, self.prop_dict)
+    self.assertEqual(
+        VerifiedBootVersion1HashtreeInfoGenerator, type(generator))
+    self.assertEqual(self.partition_size, generator.partition_size)
+    self.assertTrue(generator.fec_supported)
+
+  def test_DecomposeSparseImage(self):
+    image_file = sparse_img.SparseImage(self._generate_image())
+
+    generator = VerifiedBootVersion1HashtreeInfoGenerator(
+        self.partition_size, 4096, True)
+    generator.DecomposeSparseImage(image_file)
+    self.assertEqual(991232, generator.filesystem_size)
+    self.assertEqual(12288, generator.hashtree_size)
+    self.assertEqual(32768, generator.metadata_size)
+
+  def test_ParseHashtreeMetadata(self):
+    image_file = sparse_img.SparseImage(self._generate_image())
+    generator = VerifiedBootVersion1HashtreeInfoGenerator(
+        self.partition_size, 4096, True)
+    generator.DecomposeSparseImage(image_file)
+
+    # pylint: disable=protected-access
+    generator._ParseHashtreeMetadata()
+
+    self.assertEqual(
+        self.hash_algorithm, generator.hashtree_info.hash_algorithm)
+    self.assertEqual(self.fixed_salt, generator.hashtree_info.salt)
+    self.assertEqual(self.expected_root_hash, generator.hashtree_info.root_hash)
+
+  def test_ValidateHashtree_smoke(self):
+    generator = VerifiedBootVersion1HashtreeInfoGenerator(
+        self.partition_size, 4096, True)
+    generator.image = sparse_img.SparseImage(self._generate_image())
+
+    generator.hashtree_info = info = HashtreeInfo()
+    info.filesystem_range = RangeSet(data=[0, 991232 / 4096])
+    info.hashtree_range = RangeSet(
+        data=[991232 / 4096, (991232 + 12288) / 4096])
+    info.hash_algorithm = self.hash_algorithm
+    info.salt = self.fixed_salt
+    info.root_hash = self.expected_root_hash
+
+    self.assertTrue(generator.ValidateHashtree())
+
+  def test_ValidateHashtree_failure(self):
+    generator = VerifiedBootVersion1HashtreeInfoGenerator(
+        self.partition_size, 4096, True)
+    generator.image = sparse_img.SparseImage(self._generate_image())
+
+    generator.hashtree_info = info = HashtreeInfo()
+    info.filesystem_range = RangeSet(data=[0, 991232 / 4096])
+    info.hashtree_range = RangeSet(
+        data=[991232 / 4096, (991232 + 12288) / 4096])
+    info.hash_algorithm = self.hash_algorithm
+    info.salt = self.fixed_salt
+    info.root_hash = "a" + self.expected_root_hash[1:]
+
+    self.assertFalse(generator.ValidateHashtree())
+
+  def test_Generate(self):
+    image_file = sparse_img.SparseImage(self._generate_image())
+    generator = CreateHashtreeInfoGenerator('system', 4096, self.prop_dict)
+    info = generator.Generate(image_file)
+
+    self.assertEqual(RangeSet(data=[0, 991232 / 4096]), info.filesystem_range)
+    self.assertEqual(RangeSet(data=[991232 / 4096, (991232 + 12288) / 4096]),
+                     info.hashtree_range)
+    self.assertEqual(self.hash_algorithm, info.hash_algorithm)
+    self.assertEqual(self.fixed_salt, info.salt)
+    self.assertEqual(self.expected_root_hash, info.root_hash)
+
+
+class VerifiedBootVersion1VerityImageBuilderTest(ReleaseToolsTestCase):
+
+  DEFAULT_PARTITION_SIZE = 4096 * 1024
+  DEFAULT_PROP_DICT = {
+      'partition_size': str(DEFAULT_PARTITION_SIZE),
+      'verity': 'true',
+      'verity_block_device': '/dev/block/system',
+      'verity_key': os.path.join(get_testdata_dir(), 'testkey'),
+      'verity_fec': 'true',
+      'verity_signer_cmd': 'verity_signer',
+  }
+
+  def test_init(self):
+    prop_dict = copy.deepcopy(self.DEFAULT_PROP_DICT)
+    verity_image_builder = CreateVerityImageBuilder(prop_dict)
+    self.assertIsNotNone(verity_image_builder)
+    self.assertEqual(1, verity_image_builder.version)
+
+  def test_init_MissingProps(self):
+    prop_dict = copy.deepcopy(self.DEFAULT_PROP_DICT)
+    del prop_dict['verity']
+    self.assertIsNone(CreateVerityImageBuilder(prop_dict))
+
+    prop_dict = copy.deepcopy(self.DEFAULT_PROP_DICT)
+    del prop_dict['verity_block_device']
+    self.assertIsNone(CreateVerityImageBuilder(prop_dict))
+
+  def test_CalculateMaxImageSize(self):
+    verity_image_builder = CreateVerityImageBuilder(self.DEFAULT_PROP_DICT)
+    size = verity_image_builder.CalculateMaxImageSize()
+    self.assertLess(size, self.DEFAULT_PARTITION_SIZE)
+
+    # Same result by explicitly passing the partition size.
+    self.assertEqual(
+        verity_image_builder.CalculateMaxImageSize(),
+        verity_image_builder.CalculateMaxImageSize(
+            self.DEFAULT_PARTITION_SIZE))
+
+  @staticmethod
+  def _BuildAndVerify(prop, verify_key):
+    verity_image_builder = CreateVerityImageBuilder(prop)
+    image_size = verity_image_builder.CalculateMaxImageSize()
+
+    # Build the sparse image with verity metadata.
+    input_dir = common.MakeTempDir()
+    image = common.MakeTempFile(suffix='.img')
+    cmd = ['mkuserimg_mke2fs', input_dir, image, 'ext4', '/system',
+           str(image_size), '-j', '0', '-s']
+    common.RunAndCheckOutput(cmd)
+    verity_image_builder.Build(image)
+
+    # Verify the verity metadata.
+    cmd = ['verity_verifier', image, '-mincrypt', verify_key]
+    common.RunAndCheckOutput(cmd)
+
+  def test_Build(self):
+    self._BuildAndVerify(
+        self.DEFAULT_PROP_DICT,
+        os.path.join(get_testdata_dir(), 'testkey_mincrypt'))
+
+  def test_Build_SanityCheck(self):
+    # A sanity check for the test itself: the image shouldn't be verifiable
+    # with wrong key.
+    self.assertRaises(
+        common.ExternalError,
+        self._BuildAndVerify,
+        self.DEFAULT_PROP_DICT,
+        os.path.join(get_testdata_dir(), 'verity_mincrypt'))
+
+  def test_Build_FecDisabled(self):
+    prop_dict = copy.deepcopy(self.DEFAULT_PROP_DICT)
+    del prop_dict['verity_fec']
+    self._BuildAndVerify(
+        prop_dict,
+        os.path.join(get_testdata_dir(), 'testkey_mincrypt'))
+
+  def test_Build_SquashFs(self):
+    verity_image_builder = CreateVerityImageBuilder(self.DEFAULT_PROP_DICT)
+    verity_image_builder.CalculateMaxImageSize()
+
+    # Build the sparse image with verity metadata.
+    input_dir = common.MakeTempDir()
+    image = common.MakeTempFile(suffix='.img')
+    cmd = ['mksquashfsimage.sh', input_dir, image, '-s']
+    common.RunAndCheckOutput(cmd)
+    verity_image_builder.PadSparseImage(image)
+    verity_image_builder.Build(image)
+
+    # Verify the verity metadata.
+    cmd = ["verity_verifier", image, '-mincrypt',
+           os.path.join(get_testdata_dir(), 'testkey_mincrypt')]
+    common.RunAndCheckOutput(cmd)
+
+
+class VerifiedBootVersion2VerityImageBuilderTest(ReleaseToolsTestCase):
+
+  DEFAULT_PROP_DICT = {
+      'partition_size': str(4096 * 1024),
+      'partition_name': 'system',
+      'avb_avbtool': 'avbtool',
+      'avb_hashtree_enable': 'true',
+      'avb_add_hashtree_footer_args': '',
+  }
+
+  def test_init(self):
+    prop_dict = copy.deepcopy(self.DEFAULT_PROP_DICT)
+    verity_image_builder = CreateVerityImageBuilder(prop_dict)
+    self.assertIsNotNone(verity_image_builder)
+    self.assertEqual(2, verity_image_builder.version)
+
+  def test_init_MissingProps(self):
+    prop_dict = copy.deepcopy(self.DEFAULT_PROP_DICT)
+    del prop_dict['avb_hashtree_enable']
+    verity_image_builder = CreateVerityImageBuilder(prop_dict)
+    self.assertIsNone(verity_image_builder)
+
+  def test_Build(self):
+    prop_dict = copy.deepcopy(self.DEFAULT_PROP_DICT)
+    verity_image_builder = CreateVerityImageBuilder(prop_dict)
+    self.assertIsNotNone(verity_image_builder)
+    self.assertEqual(2, verity_image_builder.version)
+
+    input_dir = common.MakeTempDir()
+    image_dir = common.MakeTempDir()
+    system_image = os.path.join(image_dir, 'system.img')
+    system_image_size = verity_image_builder.CalculateMaxImageSize()
+    cmd = ['mkuserimg_mke2fs', input_dir, system_image, 'ext4', '/system',
+           str(system_image_size), '-j', '0', '-s']
+    common.RunAndCheckOutput(cmd)
+    verity_image_builder.Build(system_image)
+
+    # Additionally make vbmeta image so that we can verify with avbtool.
+    vbmeta_image = os.path.join(image_dir, 'vbmeta.img')
+    cmd = ['avbtool', 'make_vbmeta_image', '--include_descriptors_from_image',
+           system_image, '--output', vbmeta_image]
+    common.RunAndCheckOutput(cmd)
+
+    # Verify the verity metadata.
+    cmd = ['avbtool', 'verify_image', '--image', vbmeta_image]
+    common.RunAndCheckOutput(cmd)
+
+  def _test_CalculateMinPartitionSize_SetUp(self):
+    # To test CalculateMinPartitionSize(), by using 200MB to 2GB image size.
+    #   -  51200 = 200MB * 1024 * 1024 / 4096
+    #   - 524288 = 2GB * 1024 * 1024 * 1024 / 4096
+    image_sizes = [BLOCK_SIZE * random.randint(51200, 524288) + offset
+                   for offset in range(BLOCK_SIZE)]
+
+    prop_dict = {
+        'partition_size': None,
+        'partition_name': 'system',
+        'avb_avbtool': 'avbtool',
+        'avb_hashtree_enable': 'true',
+        'avb_add_hashtree_footer_args': None,
+    }
+    builder = CreateVerityImageBuilder(prop_dict)
+    self.assertEqual(2, builder.version)
+    return image_sizes, builder
+
+  def test_CalculateMinPartitionSize_LinearFooterSize(self):
+    """Tests with footer size which is linear to partition size."""
+    image_sizes, builder = self._test_CalculateMinPartitionSize_SetUp()
+    for image_size in image_sizes:
+      for ratio in 0.95, 0.56, 0.22:
+        expected_size = common.RoundUpTo4K(int(math.ceil(image_size / ratio)))
+        self.assertEqual(
+            expected_size,
+            builder.CalculateMinPartitionSize(
+                image_size, lambda x, ratio=ratio: int(x * ratio)))
+
+  def test_AVBCalcMinPartitionSize_SlowerGrowthFooterSize(self):
+    """Tests with footer size which grows slower than partition size."""
+
+    def _SizeCalculator(partition_size):
+      """Footer size is the power of 0.95 of partition size."""
+      # Minus footer size to return max image size.
+      return partition_size - int(math.pow(partition_size, 0.95))
+
+    image_sizes, builder = self._test_CalculateMinPartitionSize_SetUp()
+    for image_size in image_sizes:
+      min_partition_size = builder.CalculateMinPartitionSize(
+          image_size, _SizeCalculator)
+      # Checks min_partition_size can accommodate image_size.
+      self.assertGreaterEqual(
+          _SizeCalculator(min_partition_size),
+          image_size)
+      # Checks min_partition_size (round to BLOCK_SIZE) is the minimum.
+      self.assertLess(
+          _SizeCalculator(min_partition_size - BLOCK_SIZE),
+          image_size)
+
+  def test_CalculateMinPartitionSize_FasterGrowthFooterSize(self):
+    """Tests with footer size which grows faster than partition size."""
+
+    def _SizeCalculator(partition_size):
+      """Max image size is the power of 0.95 of partition size."""
+      # Max image size grows less than partition size, which means
+      # footer size grows faster than partition size.
+      return int(math.pow(partition_size, 0.95))
+
+    image_sizes, builder = self._test_CalculateMinPartitionSize_SetUp()
+    for image_size in image_sizes:
+      min_partition_size = builder.CalculateMinPartitionSize(
+          image_size, _SizeCalculator)
+      # Checks min_partition_size can accommodate image_size.
+      self.assertGreaterEqual(
+          _SizeCalculator(min_partition_size),
+          image_size)
+      # Checks min_partition_size (round to BLOCK_SIZE) is the minimum.
+      self.assertLess(
+          _SizeCalculator(min_partition_size - BLOCK_SIZE),
+          image_size)
diff --git a/tools/releasetools/testdata/TestApp.apk b/tools/releasetools/testdata/TestApp.apk
new file mode 100644
index 0000000..a911603
--- /dev/null
+++ b/tools/releasetools/testdata/TestApp.apk
Binary files differ
diff --git a/tools/releasetools/testdata/testkey.key b/tools/releasetools/testdata/testkey.key
new file mode 100644
index 0000000..3a84607
--- /dev/null
+++ b/tools/releasetools/testdata/testkey.key
@@ -0,0 +1,28 @@
+-----BEGIN PRIVATE KEY-----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+-----END PRIVATE KEY-----
diff --git a/tools/releasetools/testdata/testkey_mincrypt b/tools/releasetools/testdata/testkey_mincrypt
new file mode 100644
index 0000000..7f5d31b
--- /dev/null
+++ b/tools/releasetools/testdata/testkey_mincrypt
Binary files differ
diff --git a/tools/releasetools/testdata/verity_mincrypt b/tools/releasetools/testdata/verity_mincrypt
new file mode 100644
index 0000000..31982d9
--- /dev/null
+++ b/tools/releasetools/testdata/verity_mincrypt
Binary files differ
diff --git a/tools/releasetools/validate_target_files.py b/tools/releasetools/validate_target_files.py
index 8c9e07c..eeb802b 100755
--- a/tools/releasetools/validate_target_files.py
+++ b/tools/releasetools/validate_target_files.py
@@ -17,16 +17,24 @@
 """
 Validate a given (signed) target_files.zip.
 
-It performs checks to ensure the integrity of the input zip.
+It performs the following checks to assert the integrity of the input zip.
+
  - It verifies the file consistency between the ones in IMAGES/system.img (read
    via IMAGES/system.map) and the ones under unpacked folder of SYSTEM/. The
    same check also applies to the vendor image if present.
+
+ - It verifies the install-recovery script consistency, by comparing the
+   checksums in the script against the ones of IMAGES/{boot,recovery}.img.
+
+ - It verifies the signed Verified Boot related images, for both of Verified
+   Boot 1.0 and 2.0 (aka AVB).
 """
 
+import argparse
+import filecmp
 import logging
 import os.path
 import re
-import sys
 import zipfile
 
 import common
@@ -81,13 +89,20 @@
         logging.warning('Skipping %s that has incomplete block list', entry)
         continue
 
+      # Use the original RangeSet if applicable, which includes the shared
+      # blocks. And this needs to happen before checking the monotonicity flag.
+      if ranges.extra.get('uses_shared_blocks'):
+        file_ranges = ranges.extra['uses_shared_blocks']
+      else:
+        file_ranges = ranges
+
       # TODO(b/79951650): Handle files with non-monotonic ranges.
-      if not ranges.monotonic:
+      if not file_ranges.monotonic:
         logging.warning(
-            'Skipping %s that has non-monotonic ranges: %s', entry, ranges)
+            'Skipping %s that has non-monotonic ranges: %s', entry, file_ranges)
         continue
 
-      blocks_sha1 = image.RangeSha1(ranges)
+      blocks_sha1 = image.RangeSha1(file_ranges)
 
       # The filename under unpacked directory, such as SYSTEM/bin/sh.
       unpacked_name = os.path.join(
@@ -96,7 +111,7 @@
       file_sha1 = unpacked_file.sha1
       assert blocks_sha1 == file_sha1, \
           'file: %s, range: %s, blocks_sha1: %s, file_sha1: %s' % (
-              entry, ranges, blocks_sha1, file_sha1)
+              entry, file_ranges, blocks_sha1, file_sha1)
 
   logging.info('Validating file consistency.')
 
@@ -122,14 +137,18 @@
 
   1. full recovery:
   ...
-  if ! applypatch -c type:device:size:SHA-1; then
-  applypatch /system/etc/recovery.img type:device sha1 size && ...
+  if ! applypatch --check type:device:size:sha1; then
+    applypatch --flash /system/etc/recovery.img \\
+        type:device:size:sha1 && \\
   ...
 
   2. recovery from boot:
   ...
-  applypatch [-b bonus_args] boot_info recovery_info recovery_sha1 \
-  recovery_size patch_info && ...
+  if ! applypatch --check type:recovery_device:recovery_size:recovery_sha1; then
+    applypatch [--bonus bonus_args] \\
+        --patch /system/recovery-from-boot.p \\
+        --source type:boot_device:boot_size:boot_sha1 \\
+        --target type:recovery_device:recovery_size:recovery_sha1 && \\
   ...
 
   For full recovery, we want to calculate the SHA-1 of /system/etc/recovery.img
@@ -146,75 +165,206 @@
   logging.info('Checking %s', script_path)
   with open(os.path.join(input_tmp, script_path), 'r') as script:
     lines = script.read().strip().split('\n')
-  assert len(lines) >= 6
-  check_cmd = re.search(r'if ! applypatch -c \w+:.+:\w+:(\w+);',
+  assert len(lines) >= 10
+  check_cmd = re.search(r'if ! applypatch --check (\w+:.+:\w+:\w+);',
                         lines[1].strip())
-  expected_recovery_check_sha1 = check_cmd.group(1)
-  patch_cmd = re.search(r'(applypatch.+)&&', lines[2].strip())
-  applypatch_argv = patch_cmd.group(1).strip().split()
+  check_partition = check_cmd.group(1)
+  assert len(check_partition.split(':')) == 4
 
   full_recovery_image = info_dict.get("full_recovery_image") == "true"
   if full_recovery_image:
-    assert len(applypatch_argv) == 5
-    # Check we have the same expected SHA-1 of recovery.img in both check mode
-    # and patch mode.
-    expected_recovery_sha1 = applypatch_argv[3].strip()
-    assert expected_recovery_check_sha1 == expected_recovery_sha1
-    ValidateFileAgainstSha1(input_tmp, 'recovery.img',
-                            'SYSTEM/etc/recovery.img', expected_recovery_sha1)
-  else:
-    # We're patching boot.img to get recovery.img where bonus_args is optional
-    if applypatch_argv[1] == "-b":
-      assert len(applypatch_argv) == 8
-      boot_info_index = 3
-    else:
-      assert len(applypatch_argv) == 6
-      boot_info_index = 1
+    assert len(lines) == 10, "Invalid line count: {}".format(lines)
 
-    # boot_info: boot_type:boot_device:boot_size:boot_sha1
-    boot_info = applypatch_argv[boot_info_index].strip().split(':')
-    assert len(boot_info) == 4
+    # Expect something like "EMMC:/dev/block/recovery:28:5f9c..62e3".
+    target = re.search(r'--target (.+) &&', lines[4].strip())
+    assert target is not None, \
+        "Failed to parse target line \"{}\"".format(lines[4])
+    flash_partition = target.group(1)
+
+    # Check we have the same recovery target in the check and flash commands.
+    assert check_partition == flash_partition, \
+        "Mismatching targets: {} vs {}".format(check_partition, flash_partition)
+
+    # Validate the SHA-1 of the recovery image.
+    recovery_sha1 = flash_partition.split(':')[3]
+    ValidateFileAgainstSha1(
+        input_tmp, 'recovery.img', 'SYSTEM/etc/recovery.img', recovery_sha1)
+  else:
+    assert len(lines) == 11, "Invalid line count: {}".format(lines)
+
+    # --source boot_type:boot_device:boot_size:boot_sha1
+    source = re.search(r'--source (\w+:.+:\w+:\w+) \\', lines[4].strip())
+    assert source is not None, \
+        "Failed to parse source line \"{}\"".format(lines[4])
+
+    source_partition = source.group(1)
+    source_info = source_partition.split(':')
+    assert len(source_info) == 4, \
+        "Invalid source partition: {}".format(source_partition)
     ValidateFileAgainstSha1(input_tmp, file_name='boot.img',
                             file_path='IMAGES/boot.img',
-                            expected_sha1=boot_info[3])
+                            expected_sha1=source_info[3])
 
-    recovery_sha1_index = boot_info_index + 2
-    expected_recovery_sha1 = applypatch_argv[recovery_sha1_index]
-    assert expected_recovery_check_sha1 == expected_recovery_sha1
+    # --target recovery_type:recovery_device:recovery_size:recovery_sha1
+    target = re.search(r'--target (\w+:.+:\w+:\w+) && \\', lines[5].strip())
+    assert target is not None, \
+        "Failed to parse target line \"{}\"".format(lines[5])
+    target_partition = target.group(1)
+
+    # Check we have the same recovery target in the check and patch commands.
+    assert check_partition == target_partition, \
+        "Mismatching targets: {} vs {}".format(
+            check_partition, target_partition)
+
+    recovery_info = target_partition.split(':')
+    assert len(recovery_info) == 4, \
+        "Invalid target partition: {}".format(target_partition)
     ValidateFileAgainstSha1(input_tmp, file_name='recovery.img',
                             file_path='IMAGES/recovery.img',
-                            expected_sha1=expected_recovery_sha1)
+                            expected_sha1=recovery_info[3])
 
   logging.info('Done checking %s', script_path)
 
 
-def main(argv):
-  def option_handler():
-    return True
+def ValidateVerifiedBootImages(input_tmp, info_dict, options):
+  """Validates the Verified Boot related images.
 
-  args = common.ParseOptions(
-      argv, __doc__, extra_opts="",
-      extra_long_opts=[],
-      extra_option_handler=option_handler)
+  For Verified Boot 1.0, it verifies the signatures of the bootable images
+  (boot/recovery etc), as well as the dm-verity metadata in system images
+  (system/vendor/product). For Verified Boot 2.0, it calls avbtool to verify
+  vbmeta.img, which in turn verifies all the descriptors listed in vbmeta.
 
-  if len(args) != 1:
-    common.Usage(__doc__)
-    sys.exit(1)
+  Args:
+    input_tmp: The top-level directory of unpacked target-files.zip.
+    info_dict: The loaded info dict.
+    options: A dict that contains the user-supplied public keys to be used for
+        image verification. In particular, 'verity_key' is used to verify the
+        bootable images in VB 1.0, and the vbmeta image in VB 2.0, where
+        applicable. 'verity_key_mincrypt' will be used to verify the system
+        images in VB 1.0.
+
+  Raises:
+    AssertionError: On any verification failure.
+  """
+  # Verified boot 1.0 (images signed with boot_signer and verity_signer).
+  if info_dict.get('boot_signer') == 'true':
+    logging.info('Verifying Verified Boot images...')
+
+    # Verify the boot/recovery images (signed with boot_signer), against the
+    # given X.509 encoded pubkey (or falling back to the one in the info_dict if
+    # none given).
+    verity_key = options['verity_key']
+    if verity_key is None:
+      verity_key = info_dict['verity_key'] + '.x509.pem'
+    for image in ('boot.img', 'recovery.img', 'recovery-two-step.img'):
+      image_path = os.path.join(input_tmp, 'IMAGES', image)
+      if not os.path.exists(image_path):
+        continue
+
+      cmd = ['boot_signer', '-verify', image_path, '-certificate', verity_key]
+      proc = common.Run(cmd)
+      stdoutdata, _ = proc.communicate()
+      assert proc.returncode == 0, \
+          'Failed to verify {} with boot_signer:\n{}'.format(image, stdoutdata)
+      logging.info(
+          'Verified %s with boot_signer (key: %s):\n%s', image, verity_key,
+          stdoutdata.rstrip())
+
+  # Verify verity signed system images in Verified Boot 1.0. Note that not using
+  # 'elif' here, since 'boot_signer' and 'verity' are not bundled in VB 1.0.
+  if info_dict.get('verity') == 'true':
+    # First verify that the verity key that's built into the root image (as
+    # /verity_key) matches the one given via command line, if any.
+    if info_dict.get("system_root_image") == "true":
+      verity_key_mincrypt = os.path.join(input_tmp, 'ROOT', 'verity_key')
+    else:
+      verity_key_mincrypt = os.path.join(
+          input_tmp, 'BOOT', 'RAMDISK', 'verity_key')
+    assert os.path.exists(verity_key_mincrypt), 'Missing verity_key'
+
+    if options['verity_key_mincrypt'] is None:
+      logging.warn(
+          'Skipped checking the content of /verity_key, as the key file not '
+          'provided. Use --verity_key_mincrypt to specify.')
+    else:
+      expected_key = options['verity_key_mincrypt']
+      assert filecmp.cmp(expected_key, verity_key_mincrypt, shallow=False), \
+          "Mismatching mincrypt verity key files"
+      logging.info('Verified the content of /verity_key')
+
+    # Then verify the verity signed system/vendor/product images, against the
+    # verity pubkey in mincrypt format.
+    for image in ('system.img', 'vendor.img', 'product.img'):
+      image_path = os.path.join(input_tmp, 'IMAGES', image)
+
+      # We are not checking if the image is actually enabled via info_dict (e.g.
+      # 'system_verity_block_device=...'). Because it's most likely a bug that
+      # skips signing some of the images in signed target-files.zip, while
+      # having the top-level verity flag enabled.
+      if not os.path.exists(image_path):
+        continue
+
+      cmd = ['verity_verifier', image_path, '-mincrypt', verity_key_mincrypt]
+      proc = common.Run(cmd)
+      stdoutdata, _ = proc.communicate()
+      assert proc.returncode == 0, \
+          'Failed to verify {} with verity_verifier (key: {}):\n{}'.format(
+              image, verity_key_mincrypt, stdoutdata)
+      logging.info(
+          'Verified %s with verity_verifier (key: %s):\n%s', image,
+          verity_key_mincrypt, stdoutdata.rstrip())
+
+  # Handle the case of Verified Boot 2.0 (AVB).
+  if info_dict.get("avb_enable") == "true":
+    logging.info('Verifying Verified Boot 2.0 (AVB) images...')
+
+    # TODO(b/120517892): Temporarily disable the verification for AVB-signed
+    # images. Needing supporting changes in caller to pass in the desired keys.
+    logging.info('Temporarily disabled due to b/120517892')
+
+
+def main():
+  parser = argparse.ArgumentParser(
+      description=__doc__,
+      formatter_class=argparse.RawDescriptionHelpFormatter)
+  parser.add_argument(
+      'target_files',
+      help='the input target_files.zip to be validated')
+  parser.add_argument(
+      '--verity_key',
+      help='the verity public key to verify the bootable images (Verified '
+           'Boot 1.0), or the vbmeta image (Verified Boot 2.0, aka AVB), where '
+           'applicable')
+  for partition in common.AVB_PARTITIONS:
+    parser.add_argument(
+        '--avb_' + partition + '_key_path',
+        help='the public or private key in PEM format to verify AVB chained '
+             'partition of {}'.format(partition))
+  parser.add_argument(
+      '--verity_key_mincrypt',
+      help='the verity public key in mincrypt format to verify the system '
+           'images, if target using Verified Boot 1.0')
+  args = parser.parse_args()
+
+  # Unprovided args will have 'None' as the value.
+  options = vars(args)
 
   logging_format = '%(asctime)s - %(filename)s - %(levelname)-8s: %(message)s'
   date_format = '%Y/%m/%d %H:%M:%S'
   logging.basicConfig(level=logging.INFO, format=logging_format,
                       datefmt=date_format)
 
-  logging.info("Unzipping the input target_files.zip: %s", args[0])
-  input_tmp = common.UnzipTemp(args[0])
+  logging.info("Unzipping the input target_files.zip: %s", args.target_files)
+  input_tmp = common.UnzipTemp(args.target_files)
 
   info_dict = common.LoadInfoDict(input_tmp)
-  with zipfile.ZipFile(args[0], 'r') as input_zip:
+  with zipfile.ZipFile(args.target_files, 'r') as input_zip:
     ValidateFileConsistency(input_zip, input_tmp, info_dict)
 
   ValidateInstallRecoveryScript(input_tmp, info_dict)
 
+  ValidateVerifiedBootImages(input_tmp, info_dict, options)
+
   # TODO: Check if the OTA keys have been properly updated (the ones on /system,
   # in recovery image).
 
@@ -223,6 +373,6 @@
 
 if __name__ == '__main__':
   try:
-    main(sys.argv[1:])
+    main()
   finally:
     common.Cleanup()
diff --git a/tools/releasetools/verity_utils.py b/tools/releasetools/verity_utils.py
new file mode 100644
index 0000000..3a58755
--- /dev/null
+++ b/tools/releasetools/verity_utils.py
@@ -0,0 +1,693 @@
+#!/usr/bin/env python
+#
+# Copyright (C) 2018 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+from __future__ import print_function
+
+import logging
+import os.path
+import shlex
+import struct
+
+import common
+import sparse_img
+from rangelib import RangeSet
+
+logger = logging.getLogger(__name__)
+
+OPTIONS = common.OPTIONS
+BLOCK_SIZE = common.BLOCK_SIZE
+FIXED_SALT = "aee087a5be3b982978c923f566a94613496b417f2af592639bc80d141e34dfe7"
+
+
+class BuildVerityImageError(Exception):
+  """An Exception raised during verity image building."""
+
+  def __init__(self, message):
+    Exception.__init__(self, message)
+
+
+def GetVerityFECSize(image_size):
+  cmd = ["fec", "-s", str(image_size)]
+  output = common.RunAndCheckOutput(cmd, verbose=False)
+  return int(output)
+
+
+def GetVerityTreeSize(image_size):
+  cmd = ["build_verity_tree", "-s", str(image_size)]
+  output = common.RunAndCheckOutput(cmd, verbose=False)
+  return int(output)
+
+
+def GetVerityMetadataSize(image_size):
+  cmd = ["build_verity_metadata.py", "size", str(image_size)]
+  output = common.RunAndCheckOutput(cmd, verbose=False)
+  return int(output)
+
+
+def GetVeritySize(image_size, fec_supported):
+  verity_tree_size = GetVerityTreeSize(image_size)
+  verity_metadata_size = GetVerityMetadataSize(image_size)
+  verity_size = verity_tree_size + verity_metadata_size
+  if fec_supported:
+    fec_size = GetVerityFECSize(image_size + verity_size)
+    return verity_size + fec_size
+  return verity_size
+
+
+def GetSimgSize(image_file):
+  simg = sparse_img.SparseImage(image_file, build_map=False)
+  return simg.blocksize * simg.total_blocks
+
+
+def ZeroPadSimg(image_file, pad_size):
+  blocks = pad_size // BLOCK_SIZE
+  logger.info("Padding %d blocks (%d bytes)", blocks, pad_size)
+  simg = sparse_img.SparseImage(image_file, mode="r+b", build_map=False)
+  simg.AppendFillChunk(0, blocks)
+
+
+def BuildVerityFEC(sparse_image_path, verity_path, verity_fec_path,
+                   padding_size):
+  cmd = ["fec", "-e", "-p", str(padding_size), sparse_image_path,
+         verity_path, verity_fec_path]
+  common.RunAndCheckOutput(cmd)
+
+
+def BuildVerityTree(sparse_image_path, verity_image_path):
+  cmd = ["build_verity_tree", "-A", FIXED_SALT, sparse_image_path,
+         verity_image_path]
+  output = common.RunAndCheckOutput(cmd)
+  root, salt = output.split()
+  return root, salt
+
+
+def BuildVerityMetadata(image_size, verity_metadata_path, root_hash, salt,
+                        block_device, signer_path, key, signer_args,
+                        verity_disable):
+  cmd = ["build_verity_metadata.py", "build", str(image_size),
+         verity_metadata_path, root_hash, salt, block_device, signer_path, key]
+  if signer_args:
+    cmd.append("--signer_args=\"%s\"" % (' '.join(signer_args),))
+  if verity_disable:
+    cmd.append("--verity_disable")
+  common.RunAndCheckOutput(cmd)
+
+
+def Append2Simg(sparse_image_path, unsparse_image_path, error_message):
+  """Appends the unsparse image to the given sparse image.
+
+  Args:
+    sparse_image_path: the path to the (sparse) image
+    unsparse_image_path: the path to the (unsparse) image
+
+  Raises:
+    BuildVerityImageError: On error.
+  """
+  cmd = ["append2simg", sparse_image_path, unsparse_image_path]
+  try:
+    common.RunAndCheckOutput(cmd)
+  except:
+    logger.exception(error_message)
+    raise BuildVerityImageError(error_message)
+
+
+def Append(target, file_to_append, error_message):
+  """Appends file_to_append to target.
+
+  Raises:
+    BuildVerityImageError: On error.
+  """
+  try:
+    with open(target, "a") as out_file, open(file_to_append, "r") as input_file:
+      for line in input_file:
+        out_file.write(line)
+  except IOError:
+    logger.exception(error_message)
+    raise BuildVerityImageError(error_message)
+
+
+def CreateVerityImageBuilder(prop_dict):
+  """Returns a verity image builder based on the given build properties.
+
+  Args:
+    prop_dict: A dict that contains the build properties. In particular, it will
+        look for verity-related property values.
+
+  Returns:
+    A VerityImageBuilder instance for Verified Boot 1.0 or Verified Boot 2.0; or
+        None if the given build doesn't support Verified Boot.
+  """
+  partition_size = prop_dict.get("partition_size")
+  # partition_size could be None at this point, if using dynamic partitions.
+  if partition_size:
+    partition_size = int(partition_size)
+
+  # Verified Boot 1.0
+  verity_supported = prop_dict.get("verity") == "true"
+  is_verity_partition = "verity_block_device" in prop_dict
+  if verity_supported and is_verity_partition:
+    if OPTIONS.verity_signer_path is not None:
+      signer_path = OPTIONS.verity_signer_path
+    else:
+      signer_path = prop_dict["verity_signer_cmd"]
+    return Version1VerityImageBuilder(
+        partition_size,
+        prop_dict["verity_block_device"],
+        prop_dict.get("verity_fec") == "true",
+        signer_path,
+        prop_dict["verity_key"] + ".pk8",
+        OPTIONS.verity_signer_args,
+        "verity_disable" in prop_dict)
+
+  # Verified Boot 2.0
+  if (prop_dict.get("avb_hash_enable") == "true" or
+      prop_dict.get("avb_hashtree_enable") == "true"):
+    # key_path and algorithm are only available when chain partition is used.
+    key_path = prop_dict.get("avb_key_path")
+    algorithm = prop_dict.get("avb_algorithm")
+    if prop_dict.get("avb_hash_enable") == "true":
+      return VerifiedBootVersion2VerityImageBuilder(
+          prop_dict["partition_name"],
+          partition_size,
+          VerifiedBootVersion2VerityImageBuilder.AVB_HASH_FOOTER,
+          prop_dict["avb_avbtool"],
+          key_path,
+          algorithm,
+          prop_dict.get("avb_salt"),
+          prop_dict["avb_add_hash_footer_args"])
+    else:
+      return VerifiedBootVersion2VerityImageBuilder(
+          prop_dict["partition_name"],
+          partition_size,
+          VerifiedBootVersion2VerityImageBuilder.AVB_HASHTREE_FOOTER,
+          prop_dict["avb_avbtool"],
+          key_path,
+          algorithm,
+          prop_dict.get("avb_salt"),
+          prop_dict["avb_add_hashtree_footer_args"])
+
+  return None
+
+
+class VerityImageBuilder(object):
+  """A builder that generates an image with verity metadata for Verified Boot.
+
+  A VerityImageBuilder instance handles the works for building an image with
+  verity metadata for supporting Android Verified Boot. This class defines the
+  common interface between Verified Boot 1.0 and Verified Boot 2.0. A matching
+  builder will be returned based on the given build properties.
+
+  More info on the verity image generation can be found at the following link.
+  https://source.android.com/security/verifiedboot/dm-verity#implementation
+  """
+
+  def CalculateMaxImageSize(self, partition_size):
+    """Calculates the filesystem image size for the given partition size."""
+    raise NotImplementedError
+
+  def CalculateDynamicPartitionSize(self, image_size):
+    """Calculates and sets the partition size for a dynamic partition."""
+    raise NotImplementedError
+
+  def PadSparseImage(self, out_file):
+    """Adds padding to the generated sparse image."""
+    raise NotImplementedError
+
+  def Build(self, out_file):
+    """Builds the verity image and writes it to the given file."""
+    raise NotImplementedError
+
+
+class Version1VerityImageBuilder(VerityImageBuilder):
+  """A VerityImageBuilder for Verified Boot 1.0."""
+
+  def __init__(self, partition_size, block_dev, fec_supported, signer_path,
+               signer_key, signer_args, verity_disable):
+    self.version = 1
+    self.partition_size = partition_size
+    self.block_device = block_dev
+    self.fec_supported = fec_supported
+    self.signer_path = signer_path
+    self.signer_key = signer_key
+    self.signer_args = signer_args
+    self.verity_disable = verity_disable
+    self.image_size = None
+    self.verity_size = None
+
+  def CalculateDynamicPartitionSize(self, image_size):
+    # This needs to be implemented. Note that returning the given image size as
+    # the partition size doesn't make sense, as it will fail later.
+    raise NotImplementedError
+
+  def CalculateMaxImageSize(self, partition_size=None):
+    """Calculates the max image size by accounting for the verity metadata.
+
+    Args:
+      partition_size: The partition size, which defaults to self.partition_size
+          if unspecified.
+
+    Returns:
+      The size of the image adjusted for verity metadata.
+    """
+    if partition_size is None:
+      partition_size = self.partition_size
+    assert partition_size > 0, \
+        "Invalid partition size: {}".format(partition_size)
+
+    hi = partition_size
+    if hi % BLOCK_SIZE != 0:
+      hi = (hi // BLOCK_SIZE) * BLOCK_SIZE
+
+    # verity tree and fec sizes depend on the partition size, which
+    # means this estimate is always going to be unnecessarily small
+    verity_size = GetVeritySize(hi, self.fec_supported)
+    lo = partition_size - verity_size
+    result = lo
+
+    # do a binary search for the optimal size
+    while lo < hi:
+      i = ((lo + hi) // (2 * BLOCK_SIZE)) * BLOCK_SIZE
+      v = GetVeritySize(i, self.fec_supported)
+      if i + v <= partition_size:
+        if result < i:
+          result = i
+          verity_size = v
+        lo = i + BLOCK_SIZE
+      else:
+        hi = i
+
+    self.image_size = result
+    self.verity_size = verity_size
+
+    logger.info(
+        "Calculated image size for verity: partition_size %d, image_size %d, "
+        "verity_size %d", partition_size, result, verity_size)
+    return result
+
+  def Build(self, out_file):
+    """Creates an image that is verifiable using dm-verity.
+
+    Args:
+      out_file: the output image.
+
+    Returns:
+      AssertionError: On invalid partition sizes.
+      BuildVerityImageError: On other errors.
+    """
+    image_size = int(self.image_size)
+    tempdir_name = common.MakeTempDir(suffix="_verity_images")
+
+    # Get partial image paths.
+    verity_image_path = os.path.join(tempdir_name, "verity.img")
+    verity_metadata_path = os.path.join(tempdir_name, "verity_metadata.img")
+
+    # Build the verity tree and get the root hash and salt.
+    root_hash, salt = BuildVerityTree(out_file, verity_image_path)
+
+    # Build the metadata blocks.
+    BuildVerityMetadata(
+        image_size, verity_metadata_path, root_hash, salt, self.block_device,
+        self.signer_path, self.signer_key, self.signer_args,
+        self.verity_disable)
+
+    padding_size = self.partition_size - self.image_size - self.verity_size
+    assert padding_size >= 0
+
+    # Build the full verified image.
+    Append(
+        verity_image_path, verity_metadata_path,
+        "Failed to append verity metadata")
+
+    if self.fec_supported:
+      # Build FEC for the entire partition, including metadata.
+      verity_fec_path = os.path.join(tempdir_name, "verity_fec.img")
+      BuildVerityFEC(
+          out_file, verity_image_path, verity_fec_path, padding_size)
+      Append(verity_image_path, verity_fec_path, "Failed to append FEC")
+
+    Append2Simg(
+        out_file, verity_image_path, "Failed to append verity data")
+
+  def PadSparseImage(self, out_file):
+    sparse_image_size = GetSimgSize(out_file)
+    if sparse_image_size > self.image_size:
+      raise BuildVerityImageError(
+          "Error: image size of {} is larger than partition size of "
+          "{}".format(sparse_image_size, self.image_size))
+    ZeroPadSimg(out_file, self.image_size - sparse_image_size)
+
+
+class VerifiedBootVersion2VerityImageBuilder(VerityImageBuilder):
+  """A VerityImageBuilder for Verified Boot 2.0."""
+
+  AVB_HASH_FOOTER = 1
+  AVB_HASHTREE_FOOTER = 2
+
+  def __init__(self, partition_name, partition_size, footer_type, avbtool,
+               key_path, algorithm, salt, signing_args):
+    self.version = 2
+    self.partition_name = partition_name
+    self.partition_size = partition_size
+    self.footer_type = footer_type
+    self.avbtool = avbtool
+    self.algorithm = algorithm
+    self.key_path = key_path
+    self.salt = salt
+    self.signing_args = signing_args
+    self.image_size = None
+
+  def CalculateMinPartitionSize(self, image_size, size_calculator=None):
+    """Calculates min partition size for a given image size.
+
+    This is used when determining the partition size for a dynamic partition,
+    which should be cover the given image size (for filesystem files) as well as
+    the verity metadata size.
+
+    Args:
+      image_size: The size of the image in question.
+      size_calculator: The function to calculate max image size
+          for a given partition size.
+
+    Returns:
+      The minimum partition size required to accommodate the image size.
+    """
+    if size_calculator is None:
+      size_calculator = self.CalculateMaxImageSize
+
+    # Use image size as partition size to approximate final partition size.
+    image_ratio = size_calculator(image_size) / float(image_size)
+
+    # Prepare a binary search for the optimal partition size.
+    lo = int(image_size / image_ratio) // BLOCK_SIZE * BLOCK_SIZE - BLOCK_SIZE
+
+    # Ensure lo is small enough: max_image_size should <= image_size.
+    delta = BLOCK_SIZE
+    max_image_size = size_calculator(lo)
+    while max_image_size > image_size:
+      image_ratio = max_image_size / float(lo)
+      lo = int(image_size / image_ratio) // BLOCK_SIZE * BLOCK_SIZE - delta
+      delta *= 2
+      max_image_size = size_calculator(lo)
+
+    hi = lo + BLOCK_SIZE
+
+    # Ensure hi is large enough: max_image_size should >= image_size.
+    delta = BLOCK_SIZE
+    max_image_size = size_calculator(hi)
+    while max_image_size < image_size:
+      image_ratio = max_image_size / float(hi)
+      hi = int(image_size / image_ratio) // BLOCK_SIZE * BLOCK_SIZE + delta
+      delta *= 2
+      max_image_size = size_calculator(hi)
+
+    partition_size = hi
+
+    # Start to binary search.
+    while lo < hi:
+      mid = ((lo + hi) // (2 * BLOCK_SIZE)) * BLOCK_SIZE
+      max_image_size = size_calculator(mid)
+      if max_image_size >= image_size:  # if mid can accommodate image_size
+        if mid < partition_size:  # if a smaller partition size is found
+          partition_size = mid
+        hi = mid
+      else:
+        lo = mid + BLOCK_SIZE
+
+    logger.info(
+        "CalculateMinPartitionSize(%d): partition_size %d.", image_size,
+        partition_size)
+
+    return partition_size
+
+  def CalculateDynamicPartitionSize(self, image_size):
+    self.partition_size = self.CalculateMinPartitionSize(image_size)
+    return self.partition_size
+
+  def CalculateMaxImageSize(self, partition_size=None):
+    """Calculates max image size for a given partition size.
+
+    Args:
+      partition_size: The partition size, which defaults to self.partition_size
+          if unspecified.
+
+    Returns:
+      The maximum image size.
+
+    Raises:
+      BuildVerityImageError: On error or getting invalid image size.
+    """
+    if partition_size is None:
+      partition_size = self.partition_size
+    assert partition_size > 0, \
+        "Invalid partition size: {}".format(partition_size)
+
+    add_footer = ("add_hash_footer" if self.footer_type == self.AVB_HASH_FOOTER
+                  else "add_hashtree_footer")
+    cmd = [self.avbtool, add_footer, "--partition_size",
+           str(partition_size), "--calc_max_image_size"]
+    cmd.extend(shlex.split(self.signing_args))
+
+    proc = common.Run(cmd)
+    output, _ = proc.communicate()
+    if proc.returncode != 0:
+      raise BuildVerityImageError(
+          "Failed to calculate max image size:\n{}".format(output))
+    image_size = int(output)
+    if image_size <= 0:
+      raise BuildVerityImageError(
+          "Invalid max image size: {}".format(output))
+    self.image_size = image_size
+    return image_size
+
+  def PadSparseImage(self, out_file):
+    # No-op as the padding is taken care of by avbtool.
+    pass
+
+  def Build(self, out_file):
+    """Adds dm-verity hashtree and AVB metadata to an image.
+
+    Args:
+      out_file: Path to image to modify.
+    """
+    add_footer = ("add_hash_footer" if self.footer_type == self.AVB_HASH_FOOTER
+                  else "add_hashtree_footer")
+    cmd = [self.avbtool, add_footer,
+           "--partition_size", str(self.partition_size),
+           "--partition_name", self.partition_name,
+           "--image", out_file]
+    if self.key_path and self.algorithm:
+      cmd.extend(["--key", self.key_path, "--algorithm", self.algorithm])
+    if self.salt:
+      cmd.extend(["--salt", self.salt])
+    cmd.extend(shlex.split(self.signing_args))
+
+    proc = common.Run(cmd)
+    output, _ = proc.communicate()
+    if proc.returncode != 0:
+      raise BuildVerityImageError("Failed to add AVB footer: {}".format(output))
+
+
+class HashtreeInfoGenerationError(Exception):
+  """An Exception raised during hashtree info generation."""
+
+  def __init__(self, message):
+    Exception.__init__(self, message)
+
+
+class HashtreeInfo(object):
+  def __init__(self):
+    self.hashtree_range = None
+    self.filesystem_range = None
+    self.hash_algorithm = None
+    self.salt = None
+    self.root_hash = None
+
+
+def CreateHashtreeInfoGenerator(partition_name, block_size, info_dict):
+  generator = None
+  if (info_dict.get("verity") == "true" and
+      info_dict.get("{}_verity_block_device".format(partition_name))):
+    partition_size = info_dict["{}_size".format(partition_name)]
+    fec_supported = info_dict.get("verity_fec") == "true"
+    generator = VerifiedBootVersion1HashtreeInfoGenerator(
+        partition_size, block_size, fec_supported)
+
+  return generator
+
+
+class HashtreeInfoGenerator(object):
+  def Generate(self, image):
+    raise NotImplementedError
+
+  def DecomposeSparseImage(self, image):
+    raise NotImplementedError
+
+  def ValidateHashtree(self):
+    raise NotImplementedError
+
+
+class VerifiedBootVersion1HashtreeInfoGenerator(HashtreeInfoGenerator):
+  """A class that parses the metadata of hashtree for a given partition."""
+
+  def __init__(self, partition_size, block_size, fec_supported):
+    """Initialize VerityTreeInfo with the sparse image and input property.
+
+    Arguments:
+      partition_size: The whole size in bytes of a partition, including the
+          filesystem size, padding size, and verity size.
+      block_size: Expected size in bytes of each block for the sparse image.
+      fec_supported: True if the verity section contains fec data.
+    """
+
+    self.block_size = block_size
+    self.partition_size = partition_size
+    self.fec_supported = fec_supported
+
+    self.image = None
+    self.filesystem_size = None
+    self.hashtree_size = None
+    self.metadata_size = None
+
+    prop_dict = {
+        'partition_size': str(partition_size),
+        'verity': 'true',
+        'verity_fec': 'true' if fec_supported else None,
+        # 'verity_block_device' needs to be present to indicate a verity-enabled
+        # partition.
+        'verity_block_device': '',
+        # We don't need the following properties that are needed for signing the
+        # verity metadata.
+        'verity_key': '',
+        'verity_signer_cmd': None,
+    }
+    self.verity_image_builder = CreateVerityImageBuilder(prop_dict)
+
+    self.hashtree_info = HashtreeInfo()
+
+  def DecomposeSparseImage(self, image):
+    """Calculate the verity size based on the size of the input image.
+
+    Since we already know the structure of a verity enabled image to be:
+    [filesystem, verity_hashtree, verity_metadata, fec_data]. We can then
+    calculate the size and offset of each section.
+    """
+
+    self.image = image
+    assert self.block_size == image.blocksize
+    assert self.partition_size == image.total_blocks * self.block_size, \
+        "partition size {} doesn't match with the calculated image size." \
+        " total_blocks: {}".format(self.partition_size, image.total_blocks)
+
+    adjusted_size = self.verity_image_builder.CalculateMaxImageSize()
+    assert adjusted_size % self.block_size == 0
+
+    verity_tree_size = GetVerityTreeSize(adjusted_size)
+    assert verity_tree_size % self.block_size == 0
+
+    metadata_size = GetVerityMetadataSize(adjusted_size)
+    assert metadata_size % self.block_size == 0
+
+    self.filesystem_size = adjusted_size
+    self.hashtree_size = verity_tree_size
+    self.metadata_size = metadata_size
+
+    self.hashtree_info.filesystem_range = RangeSet(
+        data=[0, adjusted_size / self.block_size])
+    self.hashtree_info.hashtree_range = RangeSet(
+        data=[adjusted_size / self.block_size,
+              (adjusted_size + verity_tree_size) / self.block_size])
+
+  def _ParseHashtreeMetadata(self):
+    """Parses the hash_algorithm, root_hash, salt from the metadata block."""
+
+    metadata_start = self.filesystem_size + self.hashtree_size
+    metadata_range = RangeSet(
+        data=[metadata_start / self.block_size,
+              (metadata_start + self.metadata_size) / self.block_size])
+    meta_data = ''.join(self.image.ReadRangeSet(metadata_range))
+
+    # More info about the metadata structure available in:
+    # system/extras/verity/build_verity_metadata.py
+    META_HEADER_SIZE = 268
+    header_bin = meta_data[0:META_HEADER_SIZE]
+    header = struct.unpack("II256sI", header_bin)
+
+    # header: magic_number, version, signature, table_len
+    assert header[0] == 0xb001b001, header[0]
+    table_len = header[3]
+    verity_table = meta_data[META_HEADER_SIZE: META_HEADER_SIZE + table_len]
+    table_entries = verity_table.rstrip().split()
+
+    # Expected verity table format: "1 block_device block_device block_size
+    # block_size data_blocks data_blocks hash_algorithm root_hash salt"
+    assert len(table_entries) == 10, "Unexpected verity table size {}".format(
+        len(table_entries))
+    assert (int(table_entries[3]) == self.block_size and
+            int(table_entries[4]) == self.block_size)
+    assert (int(table_entries[5]) * self.block_size == self.filesystem_size and
+            int(table_entries[6]) * self.block_size == self.filesystem_size)
+
+    self.hashtree_info.hash_algorithm = table_entries[7]
+    self.hashtree_info.root_hash = table_entries[8]
+    self.hashtree_info.salt = table_entries[9]
+
+  def ValidateHashtree(self):
+    """Checks that we can reconstruct the verity hash tree."""
+
+    # Writes the filesystem section to a temp file; and calls the executable
+    # build_verity_tree to construct the hash tree.
+    adjusted_partition = common.MakeTempFile(prefix="adjusted_partition")
+    with open(adjusted_partition, "wb") as fd:
+      self.image.WriteRangeDataToFd(self.hashtree_info.filesystem_range, fd)
+
+    generated_verity_tree = common.MakeTempFile(prefix="verity")
+    root_hash, salt = BuildVerityTree(adjusted_partition, generated_verity_tree)
+
+    # The salt should be always identical, as we use fixed value.
+    assert salt == self.hashtree_info.salt, \
+        "Calculated salt {} doesn't match the one in metadata {}".format(
+            salt, self.hashtree_info.salt)
+
+    if root_hash != self.hashtree_info.root_hash:
+      logger.warning(
+          "Calculated root hash %s doesn't match the one in metadata %s",
+          root_hash, self.hashtree_info.root_hash)
+      return False
+
+    # Reads the generated hash tree and checks if it has the exact same bytes
+    # as the one in the sparse image.
+    with open(generated_verity_tree, "rb") as fd:
+      return fd.read() == ''.join(self.image.ReadRangeSet(
+          self.hashtree_info.hashtree_range))
+
+  def Generate(self, image):
+    """Parses and validates the hashtree info in a sparse image.
+
+    Returns:
+      hashtree_info: The information needed to reconstruct the hashtree.
+
+    Raises:
+      HashtreeInfoGenerationError: If we fail to generate the exact bytes of
+          the hashtree.
+    """
+
+    self.DecomposeSparseImage(image)
+    self._ParseHashtreeMetadata()
+
+    if not self.ValidateHashtree():
+      raise HashtreeInfoGenerationError("Failed to reconstruct the verity tree")
+
+    return self.hashtree_info
diff --git a/tools/signapk/Android.bp b/tools/signapk/Android.bp
index 4954cf5..e95205d 100644
--- a/tools/signapk/Android.bp
+++ b/tools/signapk/Android.bp
@@ -22,9 +22,9 @@
     manifest: "SignApk.mf",
     static_libs: [
         "apksig",
-        "bouncycastle",
-        "bouncycastle-bcpkix",
-        "conscrypt",
+        "bouncycastle-unbundled",
+        "bouncycastle-bcpkix-unbundled",
+        "conscrypt-nojarjar",
     ],
 
     required: ["libconscrypt_openjdk_jni"],
diff --git a/tools/signapk/src/com/android/signapk/CountingOutputStream.java b/tools/signapk/src/com/android/signapk/CountingOutputStream.java
new file mode 100644
index 0000000..893a780
--- /dev/null
+++ b/tools/signapk/src/com/android/signapk/CountingOutputStream.java
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+package com.android.signapk;
+import java.io.OutputStream;
+import java.io.IOException;
+
+class CountingOutputStream extends OutputStream {
+    private final OutputStream mBase;
+    private long mWrittenBytes;
+
+    public CountingOutputStream(OutputStream base) {
+        mBase = base;
+    }
+
+    @Override
+    public void close() throws IOException {
+        mBase.close();
+    }
+
+    @Override
+    public void flush() throws IOException {
+        mBase.flush();
+    }
+
+    @Override
+    public void write(byte[] b) throws IOException {
+        mBase.write(b);
+        mWrittenBytes += b.length;
+    }
+
+    @Override
+    public void write(byte[] b, int off, int len) throws IOException {
+        mBase.write(b, off, len);
+        mWrittenBytes += len;
+    }
+
+    @Override
+    public void write(int b) throws IOException {
+        mBase.write(b);
+        mWrittenBytes += 1;
+    }
+
+    public long getWrittenBytes() {
+        return mWrittenBytes;
+    }
+}
diff --git a/tools/signapk/src/com/android/signapk/SignApk.java b/tools/signapk/src/com/android/signapk/SignApk.java
index fdf6283..57973ec 100644
--- a/tools/signapk/src/com/android/signapk/SignApk.java
+++ b/tools/signapk/src/com/android/signapk/SignApk.java
@@ -36,6 +36,7 @@
 
 import com.android.apksig.ApkSignerEngine;
 import com.android.apksig.DefaultApkSignerEngine;
+import com.android.apksig.Hints;
 import com.android.apksig.apk.ApkUtils;
 import com.android.apksig.apk.MinSdkVersionException;
 import com.android.apksig.util.DataSink;
@@ -73,6 +74,7 @@
 import java.util.ArrayList;
 import java.util.Collections;
 import java.util.Enumeration;
+import java.util.HashSet;
 import java.util.List;
 import java.util.Locale;
 import java.util.TimeZone;
@@ -80,6 +82,7 @@
 import java.util.jar.JarFile;
 import java.util.jar.JarOutputStream;
 import java.util.regex.Pattern;
+import java.util.zip.ZipEntry;
 
 import javax.crypto.Cipher;
 import javax.crypto.EncryptedPrivateKeyInfo;
@@ -372,11 +375,16 @@
             Pattern ignoredFilenamePattern,
             ApkSignerEngine apkSigner,
             JarOutputStream out,
+            CountingOutputStream outCounter,
             long timestamp,
             int defaultAlignment) throws IOException {
         byte[] buffer = new byte[4096];
         int num;
 
+        List<Pattern> pinPatterns = extractPinPatterns(in);
+        ArrayList<Hints.ByteRange> pinByteRanges = pinPatterns == null ? null : new ArrayList<>();
+        HashSet<String> namesToPin = new HashSet<>();
+
         ArrayList<String> names = new ArrayList<String>();
         for (Enumeration<JarEntry> e = in.entries(); e.hasMoreElements();) {
             JarEntry entry = e.nextElement();
@@ -388,6 +396,16 @@
                     && (ignoredFilenamePattern.matcher(entryName).matches())) {
                 continue;
             }
+            if (Hints.PIN_BYTE_RANGE_ZIP_ENTRY_NAME.equals(entryName)) {
+                continue;  // We regenerate it below.
+            }
+            if (pinPatterns != null) {
+                for (Pattern pinPattern : pinPatterns) {
+                    if (pinPattern.matcher(entryName).matches()) {
+                        namesToPin.add(entryName);
+                    }
+                }
+            }
             names.add(entryName);
         }
         Collections.sort(names);
@@ -460,6 +478,7 @@
             outEntry.setExtra(extra);
             offset += extra.length;
 
+            long entryHeaderStart = outCounter.getWrittenBytes();
             out.putNextEntry(outEntry);
             ApkSignerEngine.InspectJarEntryRequest inspectEntryRequest =
                     (apkSigner != null) ? apkSigner.outputJarEntry(name) : null;
@@ -475,10 +494,18 @@
                     offset += num;
                 }
             }
+            out.closeEntry();
             out.flush();
             if (inspectEntryRequest != null) {
                 inspectEntryRequest.done();
             }
+
+            if (namesToPin.contains(name)) {
+                pinByteRanges.add(
+                    new Hints.ByteRange(
+                        entryHeaderStart,
+                        outCounter.getWrittenBytes()));
+            }
         }
 
         // Copy all the non-STORED entries.  We don't attempt to
@@ -494,6 +521,7 @@
             // Create a new entry so that the compressed len is recomputed.
             JarEntry outEntry = new JarEntry(name);
             outEntry.setTime(timestamp);
+            long entryHeaderStart = outCounter.getWrittenBytes();
             out.putNextEntry(outEntry);
             ApkSignerEngine.InspectJarEntryRequest inspectEntryRequest =
                     (apkSigner != null) ? apkSigner.outputJarEntry(name) : null;
@@ -507,11 +535,47 @@
                     entryDataSink.consume(buffer, 0, num);
                 }
             }
+            out.closeEntry();
             out.flush();
             if (inspectEntryRequest != null) {
                 inspectEntryRequest.done();
             }
+
+            if (namesToPin.contains(name)) {
+                pinByteRanges.add(
+                    new Hints.ByteRange(
+                        entryHeaderStart,
+                        outCounter.getWrittenBytes()));
+            }
         }
+
+        if (pinByteRanges != null) {
+            // Cover central directory
+            pinByteRanges.add(
+                new Hints.ByteRange(outCounter.getWrittenBytes(),
+                                    Long.MAX_VALUE));
+            addPinByteRanges(out, pinByteRanges, timestamp);
+        }
+    }
+
+    private static List<Pattern> extractPinPatterns(JarFile in) throws IOException {
+        ZipEntry pinMetaEntry = in.getEntry(Hints.PIN_HINT_ASSET_ZIP_ENTRY_NAME);
+        if (pinMetaEntry == null) {
+            return null;
+        }
+        InputStream pinMetaStream = in.getInputStream(pinMetaEntry);
+        byte[] patternBlob = new byte[(int) pinMetaEntry.getSize()];
+        pinMetaStream.read(patternBlob);
+        return Hints.parsePinPatterns(patternBlob);
+    }
+
+    private static void addPinByteRanges(JarOutputStream outputJar,
+                                         ArrayList<Hints.ByteRange> pinByteRanges,
+                                         long timestamp) throws IOException {
+        JarEntry je = new JarEntry(Hints.PIN_BYTE_RANGE_ZIP_ENTRY_NAME);
+        je.setTime(timestamp);
+        outputJar.putNextEntry(je);
+        outputJar.write(Hints.encodeByteRangeList(pinByteRanges));
     }
 
     private static boolean shouldOutputApkEntry(
@@ -679,9 +743,11 @@
         public void write(OutputStream out) throws IOException {
             try {
                 signer = new WholeFileSignerOutputStream(out, outputStream);
-                JarOutputStream outputJar = new JarOutputStream(signer);
+                CountingOutputStream outputJarCounter = new CountingOutputStream(signer);
+                JarOutputStream outputJar = new JarOutputStream(outputJarCounter);
 
-                copyFiles(inputJar, STRIP_PATTERN, null, outputJar, timestamp, 0);
+                copyFiles(inputJar, STRIP_PATTERN, null, outputJar,
+                          outputJarCounter, timestamp, 0);
                 addOtacert(outputJar, publicKeyFile, timestamp);
 
                 signer.notifyClosing();
@@ -1065,11 +1131,14 @@
                     // Build the output APK in memory, by copying input APK's ZIP entries across
                     // and then signing the output APK.
                     ByteArrayOutputStream v1SignedApkBuf = new ByteArrayOutputStream();
-                    JarOutputStream outputJar = new JarOutputStream(v1SignedApkBuf);
+                    CountingOutputStream outputJarCounter =
+                            new CountingOutputStream(v1SignedApkBuf);
+                    JarOutputStream outputJar = new JarOutputStream(outputJarCounter);
                     // Use maximum compression for compressed entries because the APK lives forever
                     // on the system partition.
                     outputJar.setLevel(9);
-                    copyFiles(inputJar, null, apkSigner, outputJar, timestamp, alignment);
+                    copyFiles(inputJar, null, apkSigner, outputJar,
+                              outputJarCounter, timestamp, alignment);
                     ApkSignerEngine.OutputJarSignatureRequest addV1SignatureRequest =
                             apkSigner.outputJarEntries();
                     if (addV1SignatureRequest != null) {
diff --git a/tools/signtos/Android.bp b/tools/signtos/Android.bp
index b26631f..688e7b8 100644
--- a/tools/signtos/Android.bp
+++ b/tools/signtos/Android.bp
@@ -21,7 +21,7 @@
     srcs: ["SignTos.java"],
     manifest: "SignTos.mf",
     static_libs: [
-        "bouncycastle",
-        "bouncycastle-bcpkix",
+        "bouncycastle-unbundled",
+        "bouncycastle-bcpkix-unbundled",
     ],
 }
diff --git a/tools/vendor_buildinfo.sh b/tools/vendor_buildinfo.sh
deleted file mode 100755
index c12f7cb..0000000
--- a/tools/vendor_buildinfo.sh
+++ /dev/null
@@ -1,15 +0,0 @@
-#!/bin/bash
-
-echo "# begin build properties"
-echo "# autogenerated by vendor_buildinfo.sh"
-
-echo "ro.product.board=$TARGET_BOOTLOADER_BOARD_NAME"
-echo "ro.board.platform=$TARGET_BOARD_PLATFORM"
-
-echo "ro.product.vendor.manufacturer=$PRODUCT_MANUFACTURER"
-echo "ro.product.vendor.model=$PRODUCT_MODEL"
-echo "ro.product.vendor.brand=$PRODUCT_BRAND"
-echo "ro.product.vendor.name=$PRODUCT_NAME"
-echo "ro.product.vendor.device=$TARGET_DEVICE"
-
-echo "# end build properties"
diff --git a/tools/warn.py b/tools/warn.py
index 01398be..c710164 100755
--- a/tools/warn.py
+++ b/tools/warn.py
@@ -75,6 +75,7 @@
 #   emit_js_data():
 
 import argparse
+import cgi
 import csv
 import multiprocessing
 import os
@@ -177,6 +178,9 @@
     {'category': 'make', 'severity': Severity.MEDIUM,
      'description': 'Invalid SDK/NDK linking',
      'patterns': [r".*: warning: .+ \(.+\) should not link to .+ \(.+\)"]},
+    {'category': 'make', 'severity': Severity.MEDIUM,
+     'description': 'Duplicate header copy',
+     'patterns': [r".*: warning: Duplicate header copy: .+"]},
     {'category': 'C/C++', 'severity': Severity.HIGH, 'option': '-Wimplicit-function-declaration',
      'description': 'Implicit function declaration',
      'patterns': [r".*: warning: implicit declaration of function .+",
@@ -238,9 +242,11 @@
      'description': 'Unused parameter',
      'patterns': [r".*: warning: unused parameter '.*'"]},
     {'category': 'C/C++', 'severity': Severity.MEDIUM, 'option': '-Wunused',
-     'description': 'Unused function, variable or label',
+     'description': 'Unused function, variable, label, comparison, etc.',
      'patterns': [r".*: warning: '.+' defined but not used",
                   r".*: warning: unused function '.+'",
+                  r".*: warning: unused label '.+'",
+                  r".*: warning: relational comparison result unused",
                   r".*: warning: lambda capture .* is not used",
                   r".*: warning: private field '.+' is not used",
                   r".*: warning: unused variable '.+'"]},
@@ -494,18 +500,33 @@
     {'category': 'java',
      'severity': Severity.LOW,
      'description':
+         'Java: Use parameter comments to document ambiguous literals',
+     'patterns': [r".*: warning: \[BooleanParameter\] .+"]},
+    {'category': 'java',
+     'severity': Severity.LOW,
+     'description':
+         'Java: This class\'s name looks like a Type Parameter.',
+     'patterns': [r".*: warning: \[ClassNamedLikeTypeParameter\] .+"]},
+    {'category': 'java',
+     'severity': Severity.LOW,
+     'description':
+         'Java: Field name is CONSTANT_CASE, but field is not static and final',
+     'patterns': [r".*: warning: \[ConstantField\] .+"]},
+    {'category': 'java',
+     'severity': Severity.LOW,
+     'description':
          'Java: @Multibinds is a more efficient and declarative mechanism for ensuring that a set multibinding is present in the graph.',
      'patterns': [r".*: warning: \[EmptySetMultibindingContributions\] .+"]},
     {'category': 'java',
      'severity': Severity.LOW,
      'description':
-         'Java: Add a private constructor to modules that will not be instantiated by Dagger.',
-     'patterns': [r".*: warning: \[PrivateConstructorForNoninstantiableModuleTest\] .+"]},
+         'Java: Prefer assertThrows to ExpectedException',
+     'patterns': [r".*: warning: \[ExpectedExceptionRefactoring\] .+"]},
     {'category': 'java',
      'severity': Severity.LOW,
      'description':
-         'Java: @Binds is a more efficient and declarative mechanism for delegating a binding.',
-     'patterns': [r".*: warning: \[UseBinds\] .+"]},
+         'Java: This field is only assigned during initialization; consider making it final',
+     'patterns': [r".*: warning: \[FieldCanBeFinal\] .+"]},
     {'category': 'java',
      'severity': Severity.LOW,
      'description':
@@ -514,28 +535,8 @@
     {'category': 'java',
      'severity': Severity.LOW,
      'description':
-         'Java: Method parameters that aren\'t checked for null shouldn\'t be annotated @Nullable',
-     'patterns': [r".*: warning: \[ParameterNotNullable\] .+"]},
-    {'category': 'java',
-     'severity': Severity.LOW,
-     'description':
-         'Java: Methods that can return null should be annotated @Nullable',
-     'patterns': [r".*: warning: \[ReturnMissingNullable\] .+"]},
-    {'category': 'java',
-     'severity': Severity.LOW,
-     'description':
-         'Java: Use parameter comments to document ambiguous literals',
-     'patterns': [r".*: warning: \[BooleanParameter\] .+"]},
-    {'category': 'java',
-     'severity': Severity.LOW,
-     'description':
-         'Java: Field name is CONSTANT CASE, but field is not static and final',
-     'patterns': [r".*: warning: \[ConstantField\] .+"]},
-    {'category': 'java',
-     'severity': Severity.LOW,
-     'description':
-         'Java: Deprecated item is not annotated with @Deprecated',
-     'patterns': [r".*: warning: \[DepAnn\] .+"]},
+         'Java: Refactors uses of the JSR 305 @Immutable to Error Prone\'s annotation',
+     'patterns': [r".*: warning: \[ImmutableRefactoring\] .+"]},
     {'category': 'java',
      'severity': Severity.LOW,
      'description':
@@ -544,11 +545,6 @@
     {'category': 'java',
      'severity': Severity.LOW,
      'description':
-         'Java: Prefer \'L\' to \'l\' for the suffix to long literals',
-     'patterns': [r".*: warning: \[LongLiteralLowerCaseSuffix\] .+"]},
-    {'category': 'java',
-     'severity': Severity.LOW,
-     'description':
          'Java: A private method that does not reference the enclosing instance can be static',
      'patterns': [r".*: warning: \[MethodCanBeStatic\] .+"]},
     {'category': 'java',
@@ -579,11 +575,21 @@
     {'category': 'java',
      'severity': Severity.LOW,
      'description':
-         'Java: Non-standard parameter comment; prefer `/*paramName=*/ arg`',
+         'Java: Non-standard parameter comment; prefer `/* paramName= */ arg`',
      'patterns': [r".*: warning: \[ParameterComment\] .+"]},
     {'category': 'java',
      'severity': Severity.LOW,
      'description':
+         'Java: Method parameters that aren\'t checked for null shouldn\'t be annotated @Nullable',
+     'patterns': [r".*: warning: \[ParameterNotNullable\] .+"]},
+    {'category': 'java',
+     'severity': Severity.LOW,
+     'description':
+         'Java: Add a private constructor to modules that will not be instantiated by Dagger.',
+     'patterns': [r".*: warning: \[PrivateConstructorForNoninstantiableModule\] .+"]},
+    {'category': 'java',
+     'severity': Severity.LOW,
+     'description':
          'Java: Utility classes (only static members) are not designed to be instantiated and should be made noninstantiable with a default constructor.',
      'patterns': [r".*: warning: \[PrivateConstructorForUtilityClass\] .+"]},
     {'category': 'java',
@@ -594,22 +600,42 @@
     {'category': 'java',
      'severity': Severity.LOW,
      'description':
+         'Java: Methods that can return null should be annotated @Nullable',
+     'patterns': [r".*: warning: \[ReturnMissingNullable\] .+"]},
+    {'category': 'java',
+     'severity': Severity.LOW,
+     'description':
+         'Java: Scopes on modules have no function and will soon be an error.',
+     'patterns': [r".*: warning: \[ScopeOnModule\] .+"]},
+    {'category': 'java',
+     'severity': Severity.LOW,
+     'description':
          'Java: The default case of a switch should appear at the end of the last statement group',
      'patterns': [r".*: warning: \[SwitchDefault\] .+"]},
     {'category': 'java',
      'severity': Severity.LOW,
      'description':
+         'Java: Prefer assertThrows to @Test(expected=...)',
+     'patterns': [r".*: warning: \[TestExceptionRefactoring\] .+"]},
+    {'category': 'java',
+     'severity': Severity.LOW,
+     'description':
          'Java: Unchecked exceptions do not need to be declared in the method signature.',
      'patterns': [r".*: warning: \[ThrowsUncheckedException\] .+"]},
     {'category': 'java',
      'severity': Severity.LOW,
      'description':
+         'Java: Prefer assertThrows to try/fail',
+     'patterns': [r".*: warning: \[TryFailRefactoring\] .+"]},
+    {'category': 'java',
+     'severity': Severity.LOW,
+     'description':
          'Java: Type parameters must be a single letter with an optional numeric suffix, or an UpperCamelCase name followed by the letter \'T\'.',
      'patterns': [r".*: warning: \[TypeParameterNaming\] .+"]},
     {'category': 'java',
      'severity': Severity.LOW,
      'description':
-         'Java: Constructors and methods with the same name should appear sequentially with no other code in between',
+         'Java: Constructors and methods with the same name should appear sequentially with no other code in between. Please re-order or re-name methods.',
      'patterns': [r".*: warning: \[UngroupedOverloads\] .+"]},
     {'category': 'java',
      'severity': Severity.LOW,
@@ -624,149 +650,14 @@
     {'category': 'java',
      'severity': Severity.LOW,
      'description':
+         'Java: @Binds is a more efficient and declarative mechanism for delegating a binding.',
+     'patterns': [r".*: warning: \[UseBinds\] .+"]},
+    {'category': 'java',
+     'severity': Severity.LOW,
+     'description':
          'Java: Wildcard imports, static or otherwise, should not be used',
      'patterns': [r".*: warning: \[WildcardImport\] .+"]},
     {'category': 'java',
-     'severity': Severity.LOW,
-     'description':
-         'Java: ',
-     'patterns': [r".*: warning: \[RemoveFieldPrefixes\] .+"]},
-    {'category': 'java',
-     'severity': Severity.LOW,
-     'description':
-         'Java: Prefer assertThrows to ExpectedException',
-     'patterns': [r".*: warning: \[ExpectedExceptionMigration\] .+"]},
-    {'category': 'java',
-     'severity': Severity.LOW,
-     'description':
-         'Java: Logger instances are not constants -- they are mutable and have side effects -- and should not be named using CONSTANT CASE',
-     'patterns': [r".*: warning: \[LoggerVariableCase\] .+"]},
-    {'category': 'java',
-     'severity': Severity.LOW,
-     'description':
-         'Java: Prefer assertThrows to @Test(expected=...)',
-     'patterns': [r".*: warning: \[TestExceptionMigration\] .+"]},
-    {'category': 'java',
-     'severity': Severity.MEDIUM,
-     'description':
-         'Java: Public fields must be final.',
-     'patterns': [r".*: warning: \[NonFinalPublicFields\] .+"]},
-    {'category': 'java',
-     'severity': Severity.MEDIUM,
-     'description':
-         'Java: Private fields that are only assigned in the initializer should be made final.',
-     'patterns': [r".*: warning: \[PrivateFieldsNotAssigned\] .+"]},
-    {'category': 'java',
-     'severity': Severity.MEDIUM,
-     'description':
-         'Java: Lists returned by methods should be immutable.',
-     'patterns': [r".*: warning: \[ReturnedListNotImmutable\] .+"]},
-    {'category': 'java',
-     'severity': Severity.MEDIUM,
-     'description':
-         'Java: Parameters to log methods should not be generated by a call to String.format() or MessageFormat.format().',
-     'patterns': [r".*: warning: \[SaferLoggerFormat\] .+"]},
-    {'category': 'java',
-     'severity': Severity.MEDIUM,
-     'description':
-         'Java: Parameters to log methods should not be generated by a call to toString(); see b/22986665.',
-     'patterns': [r".*: warning: \[SaferLoggerToString\] .+"]},
-    {'category': 'java',
-     'severity': Severity.MEDIUM,
-     'description':
-         'Java: A call to Binder.clearCallingIdentity() should be followed by Binder.restoreCallingIdentity() in a finally block. Otherwise the wrong Binder identity may be used by subsequent code.',
-     'patterns': [r".*: warning: \[BinderIdentityRestoredDangerously\] .+"]},
-    {'category': 'java',
-     'severity': Severity.MEDIUM,
-     'description':
-         'Java: Classes extending PreferenceActivity must implement isValidFragment such that it does not unconditionally return true to prevent vulnerability to fragment injection attacks.',
-     'patterns': [r".*: warning: \[FragmentInjection\] .+"]},
-    {'category': 'java',
-     'severity': Severity.MEDIUM,
-     'description':
-         'Java: Subclasses of Fragment must be instantiable via Class#newInstance(): the class must be public, static and have a public nullary constructor',
-     'patterns': [r".*: warning: \[FragmentNotInstantiable\] .+"]},
-    {'category': 'java',
-     'severity': Severity.MEDIUM,
-     'description':
-         'Java: Hardcoded reference to /sdcard',
-     'patterns': [r".*: warning: \[HardCodedSdCardPath\] .+"]},
-    {'category': 'java',
-     'severity': Severity.MEDIUM,
-     'description':
-         'Java: A wakelock acquired with a timeout may be released by the system before calling `release`, even after checking `isHeld()`. If so, it will throw a RuntimeException. Please wrap in a try/catch block.',
-     'patterns': [r".*: warning: \[WakelockReleasedDangerously\] .+"]},
-    {'category': 'java',
-     'severity': Severity.MEDIUM,
-     'description':
-         'Java: Arguments are in the wrong order or could be commented for clarity.',
-     'patterns': [r".*: warning: \[ArgumentSelectionDefectChecker\] .+"]},
-    {'category': 'java',
-     'severity': Severity.MEDIUM,
-     'description':
-         'Java: Arguments are swapped in assertEquals-like call',
-     'patterns': [r".*: warning: \[AssertEqualsArgumentOrderChecker\] .+"]},
-    {'category': 'java',
-     'severity': Severity.MEDIUM,
-     'description':
-         'Java: An equality test between objects with incompatible types always returns false',
-     'patterns': [r".*: warning: \[EqualsIncompatibleType\] .+"]},
-    {'category': 'java',
-     'severity': Severity.MEDIUM,
-     'description':
-         'Java: @AssistedInject and @Inject should not be used on different constructors in the same class.',
-     'patterns': [r".*: warning: \[AssistedInjectAndInjectOnConstructors\] .+"]},
-    {'category': 'java',
-     'severity': Severity.MEDIUM,
-     'description':
-         'Java: Constructors on abstract classes are never directly @Injected, only the constructors of their subclasses can be @Inject\'ed.',
-     'patterns': [r".*: warning: \[InjectOnConstructorOfAbstractClass\] .+"]},
-    {'category': 'java',
-     'severity': Severity.MEDIUM,
-     'description':
-         'Java: Injection frameworks currently don\'t understand Qualifiers in TYPE PARAMETER or TYPE USE contexts.',
-     'patterns': [r".*: warning: \[QualifierWithTypeUse\] .+"]},
-    {'category': 'java',
-     'severity': Severity.MEDIUM,
-     'description':
-         'Java: This code declares a binding for a common value type without a Qualifier annotation.',
-     'patterns': [r".*: warning: \[BindingToUnqualifiedCommonType\] .+"]},
-    {'category': 'java',
-     'severity': Severity.MEDIUM,
-     'description':
-         'Java: This method is not annotated with @Inject, but it overrides a method that is annotated with @com.google.inject.Inject. Guice will inject this method, and it is recommended to annotate it explicitly.',
-     'patterns': [r".*: warning: \[OverridesGuiceInjectableMethod\] .+"]},
-    {'category': 'java',
-     'severity': Severity.MEDIUM,
-     'description':
-         'Java: The ordering of parameters in overloaded methods should be as consistent as possible (when viewed from left to right)',
-     'patterns': [r".*: warning: \[InconsistentOverloads\] .+"]},
-    {'category': 'java',
-     'severity': Severity.MEDIUM,
-     'description':
-         'Java: Double-checked locking on non-volatile fields is unsafe',
-     'patterns': [r".*: warning: \[DoubleCheckedLocking\] .+"]},
-    {'category': 'java',
-     'severity': Severity.MEDIUM,
-     'description':
-         'Java: Annotations should always be immutable',
-     'patterns': [r".*: warning: \[ImmutableAnnotationChecker\] .+"]},
-    {'category': 'java',
-     'severity': Severity.MEDIUM,
-     'description':
-         'Java: Enums should always be immutable',
-     'patterns': [r".*: warning: \[ImmutableEnumChecker\] .+"]},
-    {'category': 'java',
-     'severity': Severity.MEDIUM,
-     'description':
-         'Java: Writes to static fields should not be guarded by instance locks',
-     'patterns': [r".*: warning: \[StaticGuardedByInstance\] .+"]},
-    {'category': 'java',
-     'severity': Severity.MEDIUM,
-     'description':
-         'Java: Synchronizing on non-final fields is not safe: if the field is ever updated, different threads may end up locking on different objects.',
-     'patterns': [r".*: warning: \[SynchronizeOnNonFinalField\] .+"]},
-    {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
          'Java: Method reference is ambiguous',
@@ -774,16 +665,56 @@
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
+         'Java: This method passes a pair of parameters through to String.format, but the enclosing method wasn\'t annotated @FormatMethod. Doing so gives compile-time rather than run-time protection against malformed format strings.',
+     'patterns': [r".*: warning: \[AnnotateFormatMethod\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
+         'Java: Annotations should be positioned after Javadocs, but before modifiers..',
+     'patterns': [r".*: warning: \[AnnotationPosition\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
+         'Java: Arguments are in the wrong order or could be commented for clarity.',
+     'patterns': [r".*: warning: \[ArgumentSelectionDefectChecker\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
+         'Java: Arrays do not override equals() or hashCode, so comparisons will be done on reference equality only. If neither deduplication nor lookup are needed, consider using a List instead. Otherwise, use IdentityHashMap/Set, a Map from a library that handles object arrays, or an Iterable/List of pairs.',
+     'patterns': [r".*: warning: \[ArrayAsKeyOfSetOrMap\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
+         'Java: Arguments are swapped in assertEquals-like call',
+     'patterns': [r".*: warning: \[AssertEqualsArgumentOrderChecker\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
          'Java: Assertions may be disabled at runtime and do not guarantee that execution will halt here; consider throwing an exception instead',
      'patterns': [r".*: warning: \[AssertFalse\] .+"]},
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
+         'Java: The lambda passed to assertThrows should contain exactly one statement',
+     'patterns': [r".*: warning: \[AssertThrowsMultipleStatements\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
          'Java: This assertion throws an AssertionError if it fails, which will be caught by an enclosing try block.',
      'patterns': [r".*: warning: \[AssertionFailureIgnored\] .+"]},
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
+         'Java: @AssistedInject and @Inject should not be used on different constructors in the same class.',
+     'patterns': [r".*: warning: \[AssistedInjectAndInjectOnConstructors\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
+         'Java: Make toString(), hashCode() and equals() final in AutoValue classes, so it is clear to readers that AutoValue is not overriding them',
+     'patterns': [r".*: warning: \[AutoValueFinalMethods\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
          'Java: Classes that implement Annotation must override equals and hashCode. Consider using AutoAnnotation instead of implementing Annotation by hand.',
      'patterns': [r".*: warning: \[BadAnnotationImplementation\] .+"]},
     {'category': 'java',
@@ -794,16 +725,46 @@
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
-         'Java: BigDecimal(double) and BigDecimal.valueOf(double) may lose precision, prefer BigDecimal(String) or BigDecimal(long)',
+         'Java: Importing nested classes/static methods/static fields with commonly-used names can make code harder to read, because it may not be clear from the context exactly which type is being referred to. Qualifying the name with that of the containing class can make the code clearer.',
+     'patterns': [r".*: warning: \[BadImport\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
+         'Java: instanceof used in a way that is equivalent to a null check.',
+     'patterns': [r".*: warning: \[BadInstanceof\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
+         'Java: BigDecimal#equals has surprising behavior: it also compares scale.',
+     'patterns': [r".*: warning: \[BigDecimalEquals\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
+         'Java: new BigDecimal(double) loses precision in this case.',
      'patterns': [r".*: warning: \[BigDecimalLiteralDouble\] .+"]},
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
+         'Java: A call to Binder.clearCallingIdentity() should be followed by Binder.restoreCallingIdentity() in a finally block. Otherwise the wrong Binder identity may be used by subsequent code.',
+     'patterns': [r".*: warning: \[BinderIdentityRestoredDangerously\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
+         'Java: This code declares a binding for a common value type without a Qualifier annotation.',
+     'patterns': [r".*: warning: \[BindingToUnqualifiedCommonType\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
          'Java: valueOf or autoboxing provides better time and space performance',
      'patterns': [r".*: warning: \[BoxedPrimitiveConstructor\] .+"]},
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
+         'Java: ByteBuffer.array() shouldn\'t be called unless ByteBuffer.arrayOffset() is used or if the ByteBuffer was initialized using ByteBuffer.wrap() or ByteBuffer.allocate().',
+     'patterns': [r".*: warning: \[ByteBufferBackingArray\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
          'Java: Mockito cannot mock final classes',
      'patterns': [r".*: warning: \[CannotMockFinalClass\] .+"]},
     {'category': 'java',
@@ -834,6 +795,11 @@
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
+         'Java: Providing Closeable resources makes their lifecycle unclear',
+     'patterns': [r".*: warning: \[CloseableProvides\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
          'Java: The type of the array parameter of Collection.toArray needs to be compatible with the array type',
      'patterns': [r".*: warning: \[CollectionToArraySafeParameter\] .+"]},
     {'category': 'java',
@@ -864,26 +830,71 @@
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
-         'Java: Implicit use of the platform default charset, which can result in differing behavior between JVM executions or incorrect behavior if the encoding of the data source doesn\'t match expectations.',
+         'Java: Implicit use of the platform default charset, which can result in differing behaviour between JVM executions or incorrect behavior if the encoding of the data source doesn\'t match expectations.',
      'patterns': [r".*: warning: \[DefaultCharset\] .+"]},
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
+         'Java: Avoid deprecated Thread methods; read the method\'s javadoc for details.',
+     'patterns': [r".*: warning: \[DeprecatedThreadMethods\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
+         'Java: Prefer collection factory methods or builders to the double-brace initialization pattern.',
+     'patterns': [r".*: warning: \[DoubleBraceInitialization\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
+         'Java: Double-checked locking on non-volatile fields is unsafe',
+     'patterns': [r".*: warning: \[DoubleCheckedLocking\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
          'Java: Empty top-level type declaration',
      'patterns': [r".*: warning: \[EmptyTopLevelDeclaration\] .+"]},
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
+         'Java: equals() implementation may throw NullPointerException when given null',
+     'patterns': [r".*: warning: \[EqualsBrokenForNull\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
+         'Java: Overriding Object#equals in a non-final class by using getClass rather than instanceof breaks substitutability of subclasses.',
+     'patterns': [r".*: warning: \[EqualsGetClass\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
          'Java: Classes that override equals should also override hashCode.',
      'patterns': [r".*: warning: \[EqualsHashCode\] .+"]},
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
+         'Java: An equality test between objects with incompatible types always returns false',
+     'patterns': [r".*: warning: \[EqualsIncompatibleType\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
+         'Java: The contract of #equals states that it should return false for incompatible types, while this implementation may throw ClassCastException.',
+     'patterns': [r".*: warning: \[EqualsUnsafeCast\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
+         'Java: Implementing #equals by just comparing hashCodes is fragile. Hashes collide frequently, and this will lead to false positives in #equals.',
+     'patterns': [r".*: warning: \[EqualsUsingHashCode\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
          'Java: Calls to ExpectedException#expect should always be followed by exactly one statement.',
      'patterns': [r".*: warning: \[ExpectedExceptionChecker\] .+"]},
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
+         'Java: When only using JUnit Assert\'s static methods, you should import statically instead of extending.',
+     'patterns': [r".*: warning: \[ExtendingJUnitAssert\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
          'Java: Switch case may fall through',
      'patterns': [r".*: warning: \[FallThrough\] .+"]},
     {'category': 'java',
@@ -899,11 +910,26 @@
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
+         'Java: This fuzzy equality check is using a tolerance less than the gap to the next number. You may want a less restrictive tolerance, or to assert equality.',
+     'patterns': [r".*: warning: \[FloatingPointAssertionWithinEpsilon\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
          'Java: Floating point literal loses precision',
      'patterns': [r".*: warning: \[FloatingPointLiteralPrecision\] .+"]},
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
+         'Java: Classes extending PreferenceActivity must implement isValidFragment such that it does not unconditionally return true to prevent vulnerability to fragment injection attacks.',
+     'patterns': [r".*: warning: \[FragmentInjection\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
+         'Java: Subclasses of Fragment must be instantiable via Class#newInstance(): the class must be public, static and have a public nullary constructor',
+     'patterns': [r".*: warning: \[FragmentNotInstantiable\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
          'Java: Overloads will be ambiguous when passing lambda arguments',
      'patterns': [r".*: warning: \[FunctionalInterfaceClash\] .+"]},
     {'category': 'java',
@@ -919,21 +945,56 @@
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
+         'Java: Hardcoded reference to /sdcard',
+     'patterns': [r".*: warning: \[HardCodedSdCardPath\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
          'Java: Hiding fields of superclasses may cause confusion and errors',
      'patterns': [r".*: warning: \[HidingField\] .+"]},
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
+         'Java: Annotations should always be immutable',
+     'patterns': [r".*: warning: \[ImmutableAnnotationChecker\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
+         'Java: Enums should always be immutable',
+     'patterns': [r".*: warning: \[ImmutableEnumChecker\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
          'Java: This annotation has incompatible modifiers as specified by its @IncompatibleModifiers annotation',
      'patterns': [r".*: warning: \[IncompatibleModifiers\] .+"]},
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
+         'Java: It is confusing to have a field and a parameter under the same scope that differ only in capitalization.',
+     'patterns': [r".*: warning: \[InconsistentCapitalization\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
+         'Java: Including fields in hashCode which are not compared in equals violates the contract of hashCode.',
+     'patterns': [r".*: warning: \[InconsistentHashCode\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
+         'Java: The ordering of parameters in overloaded methods should be as consistent as possible (when viewed from left to right)',
+     'patterns': [r".*: warning: \[InconsistentOverloads\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
          'Java: This for loop increments the same variable in the header and in the body',
      'patterns': [r".*: warning: \[IncrementInForLoopAndHeader\] .+"]},
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
+         'Java: Constructors on abstract classes are never directly @Injected, only the constructors of their subclasses can be @Inject\'ed.',
+     'patterns': [r".*: warning: \[InjectOnConstructorOfAbstractClass\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
          'Java: Please also override int read(byte[], int, int), otherwise multi-byte reads from this input stream are likely to be slow.',
      'patterns': [r".*: warning: \[InputStreamSlowMultibyteRead\] .+"]},
     {'category': 'java',
@@ -949,6 +1010,21 @@
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
+         'Java: This @param tag doesn\'t refer to a parameter of the method.',
+     'patterns': [r".*: warning: \[InvalidParam\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
+         'Java: This tag is invalid.',
+     'patterns': [r".*: warning: \[InvalidTag\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
+         'Java: The documented method doesn\'t actually throw this checked exception.',
+     'patterns': [r".*: warning: \[InvalidThrows\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
          'Java: Class should not implement both `Iterable` and `Iterator`',
      'patterns': [r".*: warning: \[IterableAndIterator\] .+"]},
     {'category': 'java',
@@ -979,11 +1055,21 @@
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
+         'Java: Calls to Lock#lock should be immediately followed by a try block which releases the lock.',
+     'patterns': [r".*: warning: \[LockNotBeforeTry\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
          'Java: Assignment where a boolean expression was expected; use == if this assignment wasn\'t expected or add parentheses for clarity.',
      'patterns': [r".*: warning: \[LogicalAssignment\] .+"]},
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
+         'Java: Math.abs does not always give a positive result. Please consider other methods for positive random numbers.',
+     'patterns': [r".*: warning: \[MathAbsoluteRandom\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
          'Java: Switches on enum types should either handle all values, or have a default case.',
      'patterns': [r".*: warning: \[MissingCasesInEnumSwitch\] .+"]},
     {'category': 'java',
@@ -1004,6 +1090,11 @@
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
+         'Java: A collection or proto builder was created, but its values were never accessed.',
+     'patterns': [r".*: warning: \[ModifiedButNotUsed\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
          'Java: Modifying a collection while iterating over it in a loop may cause a ConcurrentModificationException to be thrown.',
      'patterns': [r".*: warning: \[ModifyCollectionInEnhancedForLoop\] .+"]},
     {'category': 'java',
@@ -1034,6 +1125,11 @@
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
+         'Java: Instead of returning a functional type, return the actual type that the returned function would return and use lambdas at use site.',
+     'patterns': [r".*: warning: \[NoFunctionalReturnType\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
          'Java: This update of a volatile variable is non-atomic',
      'patterns': [r".*: warning: \[NonAtomicVolatileUpdate\] .+"]},
     {'category': 'java',
@@ -1054,6 +1150,11 @@
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
+         'Java: Dereference of possibly-null value',
+     'patterns': [r".*: warning: \[NullableDereference\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
          'Java: @Nullable should not be used for primitive types since they cannot be null',
      'patterns': [r".*: warning: \[NullablePrimitive\] .+"]},
     {'category': 'java',
@@ -1064,6 +1165,16 @@
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
+         'Java: Calling toString on Objects that don\'t override toString() doesn\'t provide useful information',
+     'patterns': [r".*: warning: \[ObjectToString\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
+         'Java: Objects.hashCode(Object o) should not be passed a primitive value',
+     'patterns': [r".*: warning: \[ObjectsHashCodePrimitive\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
          'Java: Use grouping parenthesis to make the operator precedence explicit',
      'patterns': [r".*: warning: \[OperatorPrecedence\] .+"]},
     {'category': 'java',
@@ -1089,6 +1200,11 @@
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
+         'Java: This method is not annotated with @Inject, but it overrides a method that is annotated with @com.google.inject.Inject. Guice will inject this method, and it is recommended to annotate it explicitly.',
+     'patterns': [r".*: warning: \[OverridesGuiceInjectableMethod\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
          'Java: Detects `/* name= */`-style comments on actual parameters where the name doesn\'t match the formal parameter',
      'patterns': [r".*: warning: \[ParameterName\] .+"]},
     {'category': 'java',
@@ -1104,8 +1220,13 @@
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
-         'Java: Protobuf fields cannot be null, so this check is redundant',
-     'patterns': [r".*: warning: \[ProtoFieldPreconditionsCheckNotNull\] .+"]},
+         'Java: A field on a protocol buffer was set twice in the same chained expression.',
+     'patterns': [r".*: warning: \[ProtoRedundantSet\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
+         'Java: Protos should not be used as a key to a map, in a set, or in a contains method on a descendant of a collection. Protos have non deterministic ordering and proto equality is deep, which is a performance issue.',
+     'patterns': [r".*: warning: \[ProtosAsKeyOfSetOrMap\] .+"]},
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
@@ -1114,6 +1235,16 @@
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
+         'Java: Qualifiers/Scope annotations on @Inject methods don\'t have any effect. Move the qualifier annotation to the binding location.',
+     'patterns': [r".*: warning: \[QualifierOrScopeOnInjectMethod\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
+         'Java: Injection frameworks currently don\'t understand Qualifiers in TYPE_PARAMETER or TYPE_USE contexts.',
+     'patterns': [r".*: warning: \[QualifierWithTypeUse\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
          'Java: reachabilityFence should always be called inside a finally block',
      'patterns': [r".*: warning: \[ReachabilityFenceUsage\] .+"]},
     {'category': 'java',
@@ -1134,11 +1265,21 @@
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
+         'Java: Void methods should not have a @return tag.',
+     'patterns': [r".*: warning: \[ReturnFromVoid\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
          'Java: Prefer the short-circuiting boolean operators \u0026\u0026 and || to \u0026 and |.',
      'patterns': [r".*: warning: \[ShortCircuitBoolean\] .+"]},
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
+         'Java: Writes to static fields should not be guarded by instance locks',
+     'patterns': [r".*: warning: \[StaticGuardedByInstance\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
          'Java: A static variable or method should be qualified with a class name, not expression',
      'patterns': [r".*: warning: \[StaticQualifiedUsingExpression\] .+"]},
     {'category': 'java',
@@ -1154,13 +1295,23 @@
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
-         'Java: String.split should never take only a single argument; it has surprising behavior',
-     'patterns': [r".*: warning: \[StringSplit\] .+"]},
+         'Java: String.split(String) has surprising behavior',
+     'patterns': [r".*: warning: \[StringSplitter\] .+"]},
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
-         'Java: Prefer Splitter to String.split',
-     'patterns': [r".*: warning: \[StringSplitter\] .+"]},
+         'Java: SWIG generated code that can\'t call a C++ destructor will leak memory',
+     'patterns': [r".*: warning: \[SwigMemoryLeak\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
+         'Java: Synchronizing on non-final fields is not safe: if the field is ever updated, different threads may end up locking on different objects.',
+     'patterns': [r".*: warning: \[SynchronizeOnNonFinalField\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
+         'Java: Code that contains System.exit() is untestable.',
+     'patterns': [r".*: warning: \[SystemExitOutsideMain\] .+"]},
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
@@ -1179,16 +1330,41 @@
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
+         'Java: Relying on the thread scheduler is discouraged; see Effective Java Item 72 (2nd edition) / 84 (3rd edition).',
+     'patterns': [r".*: warning: \[ThreadPriorityCheck\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
          'Java: Three-letter time zone identifiers are deprecated, may be ambiguous, and might not do what you intend; the full IANA time zone ID should be used instead.',
      'patterns': [r".*: warning: \[ThreeLetterTimeZoneID\] .+"]},
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
+         'Java: An implementation of Object.toString() should never return null.',
+     'patterns': [r".*: warning: \[ToStringReturnsNull\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
+         'Java: The actual and expected values appear to be swapped, which results in poor assertion failure messages. The actual value should come first.',
+     'patterns': [r".*: warning: \[TruthAssertExpected\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
          'Java: Truth Library assert is called on a constant.',
      'patterns': [r".*: warning: \[TruthConstantAsserts\] .+"]},
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
+         'Java: Argument is not compatible with the subject\'s type.',
+     'patterns': [r".*: warning: \[TruthIncompatibleType\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
+         'Java: Type parameter declaration shadows another named type',
+     'patterns': [r".*: warning: \[TypeNameShadowing\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
          'Java: Type parameter declaration overrides another type parameter already declared',
      'patterns': [r".*: warning: \[TypeParameterShadowing\] .+"]},
     {'category': 'java',
@@ -1199,26 +1375,51 @@
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
-         'Java: Creation of a Set/HashSet/HashMap of java.net.URL. equals() and hashCode() of java.net.URL class make blocking internet connections.',
+         'Java: Avoid hash-based containers of java.net.URL--the containers rely on equals() and hashCode(), which cause java.net.URL to make blocking internet connections.',
      'patterns': [r".*: warning: \[URLEqualsHashCode\] .+"]},
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
-         'Java: Switch handles all enum values; an explicit default case is unnecessary and defeats error checking for non-exhaustive switches.',
+         'Java: Collection, Iterable, Multimap, and Queue do not have well-defined equals behavior',
+     'patterns': [r".*: warning: \[UndefinedEquals\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
+         'Java: Switch handles all enum values: an explicit default case is unnecessary and defeats error checking for non-exhaustive switches.',
      'patterns': [r".*: warning: \[UnnecessaryDefaultInEnumSwitch\] .+"]},
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
+         'Java: Unnecessary use of grouping parentheses',
+     'patterns': [r".*: warning: \[UnnecessaryParentheses\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
          'Java: Finalizer may run before native code finishes execution',
      'patterns': [r".*: warning: \[UnsafeFinalization\] .+"]},
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
+         'Java: Prefer `asSubclass` instead of casting the result of `newInstance`, to detect classes of incorrect type before invoking their constructors.This way, if the class is of the incorrect type,it will throw an exception before invoking its constructor.',
+     'patterns': [r".*: warning: \[UnsafeReflectiveConstructionCast\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
          'Java: Unsynchronized method overrides a synchronized method.',
      'patterns': [r".*: warning: \[UnsynchronizedOverridesSynchronized\] .+"]},
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
+         'Java: Unused.',
+     'patterns': [r".*: warning: \[Unused\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
+         'Java: This catch block catches an exception and re-throws another, but swallows the caught exception rather than setting it as a cause. This can make debugging harder.',
+     'patterns': [r".*: warning: \[UnusedException\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
          'Java: Java assert is used in test. For testing purposes Assert.* matchers should be used.',
      'patterns': [r".*: warning: \[UseCorrectAssertInTests\] .+"]},
     {'category': 'java',
@@ -1229,213 +1430,28 @@
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
+         'Java: variableName and type with the same name would refer to the static field instead of the class',
+     'patterns': [r".*: warning: \[VariableNameSameAsType\] .+"]},
+    {'category': 'java',
+     'severity': Severity.MEDIUM,
+     'description':
          'Java: Because of spurious wakeups, Object.wait() and Condition.await() must always be called in a loop',
      'patterns': [r".*: warning: \[WaitNotInLoop\] .+"]},
     {'category': 'java',
      'severity': Severity.MEDIUM,
      'description':
-         'Java: Pluggable Type checker internal error',
-     'patterns': [r".*: warning: \[PluggableTypeChecker\] .+"]},
-    {'category': 'java',
-     'severity': Severity.MEDIUM,
-     'description':
-         'Java: Invalid message format-style format specifier ({0}), expected printf-style (%s)',
-     'patterns': [r".*: warning: \[FloggerMessageFormat\] .+"]},
-    {'category': 'java',
-     'severity': Severity.MEDIUM,
-     'description':
-         'Java: Logger level check is already implied in the log() call. An explicit at[Level]().isEnabled() check is redundant.',
-     'patterns': [r".*: warning: \[FloggerRedundantIsEnabled\] .+"]},
-    {'category': 'java',
-     'severity': Severity.MEDIUM,
-     'description':
-         'Java: Calling withCause(Throwable) with an inline allocated Throwable is discouraged. Consider using withStackTrace(StackSize) instead, and specifying a reduced stack size (e.g. SMALL, MEDIUM or LARGE) instead of FULL, to improve performance.',
-     'patterns': [r".*: warning: \[FloggerWithCause\] .+"]},
-    {'category': 'java',
-     'severity': Severity.MEDIUM,
-     'description':
-         'Java: Use withCause to associate Exceptions with log statements',
-     'patterns': [r".*: warning: \[FloggerWithoutCause\] .+"]},
-    {'category': 'java',
-     'severity': Severity.MEDIUM,
-     'description':
-         'Java: No bug exists to track an ignored test',
-     'patterns': [r".*: warning: \[IgnoredTestWithoutBug\] .+"]},
-    {'category': 'java',
-     'severity': Severity.MEDIUM,
-     'description':
-         'Java: @Ignore is preferred to @Suppress for JUnit4 tests. @Suppress may silently fail in JUnit4 (that is, tests may run anyway.)',
-     'patterns': [r".*: warning: \[JUnit4SuppressWithoutIgnore\] .+"]},
-    {'category': 'java',
-     'severity': Severity.MEDIUM,
-     'description':
-         'Java: Medium and large test classes should document why they are medium or large',
-     'patterns': [r".*: warning: \[JUnit4TestAttributeMissing\] .+"]},
-    {'category': 'java',
-     'severity': Severity.MEDIUM,
-     'description':
-         'Java: java.net.IDN implements the older IDNA2003 standard. Prefer com.google.i18n.Idn, which implements the newer UTS #46 standard',
-     'patterns': [r".*: warning: \[JavaNetIdn\] .+"]},
-    {'category': 'java',
-     'severity': Severity.MEDIUM,
-     'description':
-         'Java: Consider requiring strict parsing on JodaDurationFlag instances. Before adjusting existing flags, check the documentation and your existing configuration to avoid crashes!',
-     'patterns': [r".*: warning: \[JodaDurationFlagStrictParsing\] .+"]},
-    {'category': 'java',
-     'severity': Severity.MEDIUM,
-     'description':
-         'Java: Logging an exception and throwing it (or a new exception) for the same exceptional situation is an anti-pattern.',
-     'patterns': [r".*: warning: \[LogAndThrow\] .+"]},
-    {'category': 'java',
-     'severity': Severity.MEDIUM,
-     'description':
-         'Java: FormattingLogger uses wrong or mismatched format string',
-     'patterns': [r".*: warning: \[MisusedFormattingLogger\] .+"]},
-    {'category': 'java',
-     'severity': Severity.MEDIUM,
-     'description':
-         'Java: Flags should be final',
-     'patterns': [r".*: warning: \[NonFinalFlag\] .+"]},
-    {'category': 'java',
-     'severity': Severity.MEDIUM,
-     'description':
-         'Java: Reading a flag from a static field or initializer block will cause it to always receive the default value and will cause an IllegalFlagStateException if the flag is ever set.',
-     'patterns': [r".*: warning: \[StaticFlagUsage\] .+"]},
-    {'category': 'java',
-     'severity': Severity.MEDIUM,
-     'description':
-         'Java: Apps must use BuildCompat.isAtLeastO to check whether they\'re running on Android O',
-     'patterns': [r".*: warning: \[UnsafeSdkVersionCheck\] .+"]},
+         'Java: A wakelock acquired with a timeout may be released by the system before calling `release`, even after checking `isHeld()`. If so, it will throw a RuntimeException. Please wrap in a try/catch block.',
+     'patterns': [r".*: warning: \[WakelockReleasedDangerously\] .+"]},
     {'category': 'java',
      'severity': Severity.HIGH,
      'description':
-         'Java: Logging tag cannot be longer than 23 characters.',
-     'patterns': [r".*: warning: \[LogTagLength\] .+"]},
+         'Java: AndroidInjection.inject() should always be invoked before calling super.lifecycleMethod()',
+     'patterns': [r".*: warning: \[AndroidInjectionBeforeSuper\] .+"]},
     {'category': 'java',
      'severity': Severity.HIGH,
      'description':
-         'Java: Relative class name passed to ComponentName constructor',
-     'patterns': [r".*: warning: \[RelativeComponentName\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Explicitly enumerate all cases in switch statements for certain enum types.',
-     'patterns': [r".*: warning: \[EnumerateAllCasesInEnumSwitch\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Do not call assumeTrue(tester.getExperimentValueFor(...)). Use @RequireEndToEndTestExperiment instead.',
-     'patterns': [r".*: warning: \[JUnitAssumeExperiment\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: The accessed field or method is not visible here. Note that the default production visibility for @VisibleForTesting is Visibility.PRIVATE.',
-     'patterns': [r".*: warning: \[VisibleForTestingChecker\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Detects errors encountered building Error Prone plugins',
-     'patterns': [r".*: warning: \[ErrorPronePluginCorrectness\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Parcelable CREATOR fields should be Creator\u003cT>',
-     'patterns': [r".*: warning: \[ParcelableCreatorType\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Enforce reflected Parcelables are kept by Proguard',
-     'patterns': [r".*: warning: \[ReflectedParcelable\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Any class that extends IntentService should have @Nullable notation on method onHandleIntent(@Nullable Intent intent) and handle the case if intent is null.',
-     'patterns': [r".*: warning: \[OnHandleIntentNullableChecker\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: In many cases, randomUUID is not necessary, and it slows the performance, which can be quite severe especially when this operation happens at start up time. Consider replacing it with cheaper alternatives, like object.hashCode() or IdGenerator.INSTANCE.getRandomId()',
-     'patterns': [r".*: warning: \[UUIDChecker\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: DynamicActivity.findViewById(int) is slow and should not be used inside View.onDraw(Canvas)!',
-     'patterns': [r".*: warning: \[NoFindViewByIdInOnDrawChecker\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Passing Throwable/Exception argument to the message format L.x(). Calling L.w(tag, message, ex) instead of L.w(tag, ex, message)',
-     'patterns': [r".*: warning: \[WrongThrowableArgumentInLogChecker\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: New splicers are disallowed on paths that are being Libsearched',
-     'patterns': [r".*: warning: \[BlacklistedSplicerPathChecker\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Object serialized in Bundle may have been flattened to base type.',
-     'patterns': [r".*: warning: \[BundleDeserializationCast\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Log tag too long, cannot exceed 23 characters.',
-     'patterns': [r".*: warning: \[IsLoggableTagLength\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Certain resources in `android.R.string` have names that do not match their content',
-     'patterns': [r".*: warning: \[MislabeledAndroidString\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Return value of android.graphics.Rect.intersect() must be checked',
-     'patterns': [r".*: warning: \[RectIntersectReturnValueIgnored\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Incompatible type as argument to Object-accepting Java collections method',
-     'patterns': [r".*: warning: \[CollectionIncompatibleType\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: @CompatibleWith\'s value is not a type argument.',
-     'patterns': [r".*: warning: \[CompatibleWithAnnotationMisuse\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Passing argument to a generic method with an incompatible type.',
-     'patterns': [r".*: warning: \[IncompatibleArgumentType\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Invalid printf-style format string',
-     'patterns': [r".*: warning: \[FormatString\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Invalid format string passed to formatting method.',
-     'patterns': [r".*: warning: \[FormatStringAnnotation\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Checks for unguarded accesses to fields and methods with @GuardedBy annotations',
-     'patterns': [r".*: warning: \[GuardedBy\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Type declaration annotated with @Immutable is not immutable',
-     'patterns': [r".*: warning: \[Immutable\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: This method does not acquire the locks specified by its @LockMethod annotation',
-     'patterns': [r".*: warning: \[LockMethodChecker\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: This method does not acquire the locks specified by its @UnlockMethod annotation',
-     'patterns': [r".*: warning: \[UnlockMethod\] .+"]},
+         'Java: Use of class, field, or method that is not compatible with legacy Android devices',
+     'patterns': [r".*: warning: \[AndroidJdkLibsChecker\] .+"]},
     {'category': 'java',
      'severity': Severity.HIGH,
      'description':
@@ -1464,6 +1480,11 @@
     {'category': 'java',
      'severity': Severity.HIGH,
      'description':
+         'Java: @AssistedInject and @Inject cannot be used on the same constructor.',
+     'patterns': [r".*: warning: \[AssistedInjectAndInjectOnSameConstructor\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
          'Java: AsyncCallable should not return a null Future, only a Future whose result is null.',
      'patterns': [r".*: warning: \[AsyncCallableReturnsNull\] .+"]},
     {'category': 'java',
@@ -1474,11 +1495,26 @@
     {'category': 'java',
      'severity': Severity.HIGH,
      'description':
+         'Java: @AutoFactory and @Inject should not be used in the same type.',
+     'patterns': [r".*: warning: \[AutoFactoryAtInject\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
+         'Java: Arguments to AutoValue constructor are in the wrong order',
+     'patterns': [r".*: warning: \[AutoValueConstructorOrderChecker\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
          'Java: Shift by an amount that is out of range',
      'patterns': [r".*: warning: \[BadShiftAmount\] .+"]},
     {'category': 'java',
      'severity': Severity.HIGH,
      'description':
+         'Java: Object serialized in Bundle may have been flattened to base type.',
+     'patterns': [r".*: warning: \[BundleDeserializationCast\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
          'Java: The called constructor accepts a parameter with the same name and type as one of its caller\'s parameters, but its caller doesn\'t pass that parameter to it.  It\'s likely that it was intended to.',
      'patterns': [r".*: warning: \[ChainingConstructorIgnoresParameter\] .+"]},
     {'category': 'java',
@@ -1494,11 +1530,21 @@
     {'category': 'java',
      'severity': Severity.HIGH,
      'description':
+         'Java: Incompatible type as argument to Object-accepting Java collections method',
+     'patterns': [r".*: warning: \[CollectionIncompatibleType\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
          'Java:  Implementing \'Comparable\u003cT>\' where T is not compatible with the implementing class.',
      'patterns': [r".*: warning: \[ComparableType\] .+"]},
     {'category': 'java',
      'severity': Severity.HIGH,
      'description':
+         'Java: this == null is always false, this != null is always true',
+     'patterns': [r".*: warning: \[ComparingThisWithNull\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
          'Java: This comparison method violates the contract',
      'patterns': [r".*: warning: \[ComparisonContractViolated\] .+"]},
     {'category': 'java',
@@ -1509,6 +1555,11 @@
     {'category': 'java',
      'severity': Severity.HIGH,
      'description':
+         'Java: @CompatibleWith\'s value is not a type argument.',
+     'patterns': [r".*: warning: \[CompatibleWithAnnotationMisuse\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
          'Java: Non-compile-time constant expression passed to parameter with @CompileTimeConstant type annotation.',
      'patterns': [r".*: warning: \[CompileTimeConstant\] .+"]},
     {'category': 'java',
@@ -1529,6 +1580,11 @@
     {'category': 'java',
      'severity': Severity.HIGH,
      'description':
+         'Java: Dagger @Provides methods may not return null unless annotated with @Nullable',
+     'patterns': [r".*: warning: \[DaggerProvidesNull\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
          'Java: Exception created but not thrown',
      'patterns': [r".*: warning: \[DeadException\] .+"]},
     {'category': 'java',
@@ -1539,6 +1595,11 @@
     {'category': 'java',
      'severity': Severity.HIGH,
      'description':
+         'Java: Deprecated item is not annotated with @Deprecated',
+     'patterns': [r".*: warning: \[DepAnn\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
          'Java: Division by integer literal zero',
      'patterns': [r".*: warning: \[DivZero\] .+"]},
     {'category': 'java',
@@ -1564,11 +1625,26 @@
     {'category': 'java',
      'severity': Severity.HIGH,
      'description':
+         'Java: Comparing different pairs of fields/getters in an equals implementation is probably a mistake.',
+     'patterns': [r".*: warning: \[EqualsWrongThing\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
          'Java: Method annotated @ForOverride must be protected or package-private and only invoked from declaring class, or from an override of the method',
      'patterns': [r".*: warning: \[ForOverride\] .+"]},
     {'category': 'java',
      'severity': Severity.HIGH,
      'description':
+         'Java: Invalid printf-style format string',
+     'patterns': [r".*: warning: \[FormatString\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
+         'Java: Invalid format string passed to formatting method.',
+     'patterns': [r".*: warning: \[FormatStringAnnotation\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
          'Java: Casting a lambda to this @FunctionalInterface can cause a behavior change from casting to a functional superinterface, which is surprising to users.  Prefer decorator methods to this surprising behavior.',
      'patterns': [r".*: warning: \[FunctionalInterfaceMethodChanged\] .+"]},
     {'category': 'java',
@@ -1594,6 +1670,26 @@
     {'category': 'java',
      'severity': Severity.HIGH,
      'description':
+         'Java: Checks for unguarded accesses to fields and methods with @GuardedBy annotations',
+     'patterns': [r".*: warning: \[GuardedBy\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
+         'Java: Scope annotation on implementation class of AssistedInject factory is not allowed',
+     'patterns': [r".*: warning: \[GuiceAssistedInjectScoping\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
+         'Java: A constructor cannot have two @Assisted parameters of the same type unless they are disambiguated with named @Assisted annotations.',
+     'patterns': [r".*: warning: \[GuiceAssistedParameters\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
+         'Java: Although Guice allows injecting final fields, doing so is disallowed because the injected value may not be visible to other threads.',
+     'patterns': [r".*: warning: \[GuiceInjectOnFinalField\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
          'Java: contains() is a legacy method that is equivalent to containsValue()',
      'patterns': [r".*: warning: \[HashtableContains\] .+"]},
     {'category': 'java',
@@ -1604,11 +1700,21 @@
     {'category': 'java',
      'severity': Severity.HIGH,
      'description':
+         'Java: Type declaration annotated with @Immutable is not immutable',
+     'patterns': [r".*: warning: \[Immutable\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
          'Java: Modifying an immutable collection is guaranteed to throw an exception and leave the collection unmodified',
      'patterns': [r".*: warning: \[ImmutableModification\] .+"]},
     {'category': 'java',
      'severity': Severity.HIGH,
      'description':
+         'Java: Passing argument to a generic method with an incompatible type.',
+     'patterns': [r".*: warning: \[IncompatibleArgumentType\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
          'Java: The first argument to indexOf is a Unicode code point, and the second is the index to start the search from',
      'patterns': [r".*: warning: \[IndexOfChar\] .+"]},
     {'category': 'java',
@@ -1624,6 +1730,41 @@
     {'category': 'java',
      'severity': Severity.HIGH,
      'description':
+         'Java: A scoping annotation\'s Target should include TYPE and METHOD.',
+     'patterns': [r".*: warning: \[InjectInvalidTargetingOnScopingAnnotation\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
+         'Java: Using more than one qualifier annotation on the same element is not allowed.',
+     'patterns': [r".*: warning: \[InjectMoreThanOneQualifier\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
+         'Java: A class can be annotated with at most one scope annotation.',
+     'patterns': [r".*: warning: \[InjectMoreThanOneScopeAnnotationOnClass\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
+         'Java: Members shouldn\'t be annotated with @Inject if constructor is already annotated @Inject',
+     'patterns': [r".*: warning: \[InjectOnMemberAndConstructor\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
+         'Java: Scope annotation on an interface or abstact class is not allowed',
+     'patterns': [r".*: warning: \[InjectScopeAnnotationOnInterfaceOrAbstractClass\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
+         'Java: Scoping and qualifier annotations must have runtime retention.',
+     'patterns': [r".*: warning: \[InjectScopeOrQualifierAnnotationRetention\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
+         'Java: Injected constructors cannot be optional nor have binding annotations',
+     'patterns': [r".*: warning: \[InjectedConstructorAnnotations\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
          'Java: A standard cryptographic operation is used in a mode that is prone to vulnerabilities',
      'patterns': [r".*: warning: \[InsecureCryptoUsage\] .+"]},
     {'category': 'java',
@@ -1644,6 +1785,11 @@
     {'category': 'java',
      'severity': Severity.HIGH,
      'description':
+         'Java: Log tag too long, cannot exceed 23 characters.',
+     'patterns': [r".*: warning: \[IsLoggableTagLength\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
          'Java: Path implements Iterable\u003cPath>; prefer Collection\u003cPath> for clarity',
      'patterns': [r".*: warning: \[IterablePathParameter\] .+"]},
     {'category': 'java',
@@ -1674,7 +1820,7 @@
     {'category': 'java',
      'severity': Severity.HIGH,
      'description':
-         'Java: This looks like a test method but is not run; please add @Test or @Ignore, or, if this is a helper method, reduce its visibility.',
+         'Java: This looks like a test method but is not run; please add @Test and @Ignore, or, if this is a helper method, reduce its visibility.',
      'patterns': [r".*: warning: \[JUnit4TestNotRun\] .+"]},
     {'category': 'java',
      'severity': Severity.HIGH,
@@ -1684,21 +1830,61 @@
     {'category': 'java',
      'severity': Severity.HIGH,
      'description':
+         'Java: Use of class, field, or method that is not compatible with JDK 7',
+     'patterns': [r".*: warning: \[Java7ApiChecker\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
+         'Java: Abstract and default methods are not injectable with javax.inject.Inject',
+     'patterns': [r".*: warning: \[JavaxInjectOnAbstractMethod\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
+         'Java: @javax.inject.Inject cannot be put on a final field.',
+     'patterns': [r".*: warning: \[JavaxInjectOnFinalField\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
          'Java: This pattern will silently corrupt certain byte sequences from the serialized protocol message. Use ByteString or byte[] directly',
      'patterns': [r".*: warning: \[LiteByteStringUtf8\] .+"]},
     {'category': 'java',
      'severity': Severity.HIGH,
      'description':
+         'Java: This method does not acquire the locks specified by its @LockMethod annotation',
+     'patterns': [r".*: warning: \[LockMethodChecker\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
+         'Java: Prefer \'L\' to \'l\' for the suffix to long literals',
+     'patterns': [r".*: warning: \[LongLiteralLowerCaseSuffix\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
          'Java: Loop condition is never modified in loop body.',
      'patterns': [r".*: warning: \[LoopConditionChecker\] .+"]},
     {'category': 'java',
      'severity': Severity.HIGH,
      'description':
+         'Java: Math.round(Integer) results in truncation',
+     'patterns': [r".*: warning: \[MathRoundIntLong\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
+         'Java: Certain resources in `android.R.string` have names that do not match their content',
+     'patterns': [r".*: warning: \[MislabeledAndroidString\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
          'Java: Overriding method is missing a call to overridden super method',
      'patterns': [r".*: warning: \[MissingSuperCall\] .+"]},
     {'category': 'java',
      'severity': Severity.HIGH,
      'description':
+         'Java: A terminating method call is required for a test helper to have any effect.',
+     'patterns': [r".*: warning: \[MissingTestCall\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
          'Java: Use of "YYYY" (week year) in a date pattern without "ww" (week in year). You probably meant to use "yyyy" (year) instead.',
      'patterns': [r".*: warning: \[MisusedWeekYear\] .+"]},
     {'category': 'java',
@@ -1719,6 +1905,11 @@
     {'category': 'java',
      'severity': Severity.HIGH,
      'description':
+         'Java: This class has more than one @Inject-annotated constructor. Please remove the @Inject annotation from all but one of them.',
+     'patterns': [r".*: warning: \[MoreThanOneInjectableConstructor\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
          'Java: The result of this method must be closed.',
      'patterns': [r".*: warning: \[MustBeClosedChecker\] .+"]},
     {'category': 'java',
@@ -1764,11 +1955,31 @@
     {'category': 'java',
      'severity': Severity.HIGH,
      'description':
+         'Java: Annotations cannot be both Scope annotations and Qualifier annotations: this causes confusion when trying to use them.',
+     'patterns': [r".*: warning: \[OverlappingQualifierAndScopeAnnotation\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
+         'Java: This method is not annotated with @Inject, but it overrides a method that is  annotated with @javax.inject.Inject. The method will not be Injected.',
+     'patterns': [r".*: warning: \[OverridesJavaxInjectableMethod\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
          'Java: Declaring types inside package-info.java files is very bad form',
      'patterns': [r".*: warning: \[PackageInfo\] .+"]},
     {'category': 'java',
      'severity': Severity.HIGH,
      'description':
+         'Java: Method parameter has wrong package',
+     'patterns': [r".*: warning: \[ParameterPackage\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
+         'Java: Detects classes which implement Parcelable but don\'t have CREATOR',
+     'patterns': [r".*: warning: \[ParcelableCreator\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
          'Java: Literal passed as first argument to Preconditions.checkNotNull() can never be null',
      'patterns': [r".*: warning: \[PreconditionsCheckNotNull\] .+"]},
     {'category': 'java',
@@ -1779,7 +1990,7 @@
     {'category': 'java',
      'severity': Severity.HIGH,
      'description':
-         'Java: Using ::equals as an incompatible Predicate; the predicate will always return false',
+         'Java: Using ::equals or ::isInstance as an incompatible Predicate; the predicate will always return false',
      'patterns': [r".*: warning: \[PredicateIncompatibleType\] .+"]},
     {'category': 'java',
      'severity': Severity.HIGH,
@@ -1789,7 +2000,7 @@
     {'category': 'java',
      'severity': Severity.HIGH,
      'description':
-         'Java: Protobuf fields cannot be null',
+         'Java: Protobuf fields cannot be null.',
      'patterns': [r".*: warning: \[ProtoFieldNullComparison\] .+"]},
     {'category': 'java',
      'severity': Severity.HIGH,
@@ -1804,6 +2015,11 @@
     {'category': 'java',
      'severity': Severity.HIGH,
      'description':
+         'Java: @Provides methods need to be declared in a Module to have any effect.',
+     'patterns': [r".*: warning: \[ProvidesMethodOutsideOfModule\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
          'Java: Casting a random number in the range [0.0, 1.0) to an integer or long always results in 0.',
      'patterns': [r".*: warning: \[RandomCast\] .+"]},
     {'category': 'java',
@@ -1814,6 +2030,16 @@
     {'category': 'java',
      'severity': Severity.HIGH,
      'description':
+         'Java: Return value of android.graphics.Rect.intersect() must be checked',
+     'patterns': [r".*: warning: \[RectIntersectReturnValueIgnored\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
+         'Java: Use of method or class annotated with @RestrictTo',
+     'patterns': [r".*: warning: \[RestrictTo\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
          'Java:  Check for non-whitelisted callers to RestrictedApiChecker.',
      'patterns': [r".*: warning: \[RestrictedApiChecker\] .+"]},
     {'category': 'java',
@@ -1849,6 +2075,11 @@
     {'category': 'java',
      'severity': Severity.HIGH,
      'description':
+         'Java: Static and default interface methods are not natively supported on older Android devices. ',
+     'patterns': [r".*: warning: \[StaticOrDefaultInterfaceMethod\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
          'Java: Calling toString on a Stream does not provide useful information',
      'patterns': [r".*: warning: \[StreamToString\] .+"]},
     {'category': 'java',
@@ -1859,6 +2090,11 @@
     {'category': 'java',
      'severity': Severity.HIGH,
      'description':
+         'Java: String.substring(0) returns the original String',
+     'patterns': [r".*: warning: \[SubstringOfZero\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
          'Java: Suppressing "deprecated" is probably a typo for "deprecation"',
      'patterns': [r".*: warning: \[SuppressWarningsDeprecated\] .+"]},
     {'category': 'java',
@@ -1889,6 +2125,11 @@
     {'category': 'java',
      'severity': Severity.HIGH,
      'description':
+         'Java: This method does not acquire the locks specified by its @UnlockMethod annotation',
+     'patterns': [r".*: warning: \[UnlockMethod\] .+"]},
+    {'category': 'java',
+     'severity': Severity.HIGH,
+     'description':
          'Java: Non-generic methods should not be invoked with type arguments',
      'patterns': [r".*: warning: \[UnnecessaryTypeArgument\] .+"]},
     {'category': 'java',
@@ -1906,191 +2147,6 @@
      'description':
          'Java: `var` should not be used as a type name.',
      'patterns': [r".*: warning: \[VarTypeName\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Method parameter has wrong package',
-     'patterns': [r".*: warning: \[ParameterPackage\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Type declaration annotated with @ThreadSafe is not thread safe',
-     'patterns': [r".*: warning: \[ThreadSafe\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Use of class, field, or method that is not compatible with legacy Android devices',
-     'patterns': [r".*: warning: \[AndroidApiChecker\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Invalid use of Flogger format string',
-     'patterns': [r".*: warning: \[AndroidFloggerFormatString\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Use TunnelException.getCauseAs(Class) instead of casting the result of TunnelException.getCause().',
-     'patterns': [r".*: warning: \[DoNotCastTunnelExceptionCause\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Identifies undesirable mocks.',
-     'patterns': [r".*: warning: \[DoNotMock_ForJavaBuilder\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Duration Flag should NOT have units in the variable name or the @FlagSpec\'s name or altName field.',
-     'patterns': [r".*: warning: \[DurationFlagWithUnits\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Duration.get() only works with SECONDS or NANOS.',
-     'patterns': [r".*: warning: \[DurationGetTemporalUnit\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Invalid printf-style format string',
-     'patterns': [r".*: warning: \[FloggerFormatString\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Test class may not be run because it is missing a @RunWith annotation',
-     'patterns': [r".*: warning: \[JUnit4RunWithMissing\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Use of class, field, or method that is not compatible with JDK 7',
-     'patterns': [r".*: warning: \[Java7ApiChecker\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Use of java.time.Duration.withNanos(int) is not allowed.',
-     'patterns': [r".*: warning: \[JavaDurationWithNanos\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Use of java.time.Duration.withSeconds(long) is not allowed.',
-     'patterns': [r".*: warning: \[JavaDurationWithSeconds\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: java.time APIs that silently use the default system time-zone are not allowed.',
-     'patterns': [r".*: warning: \[JavaTimeDefaultTimeZone\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Use of new Duration(long) is not allowed. Please use Duration.millis(long) instead.',
-     'patterns': [r".*: warning: \[JodaDurationConstructor\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Use of duration.withMillis(long) is not allowed. Please use Duration.millis(long) instead.',
-     'patterns': [r".*: warning: \[JodaDurationWithMillis\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Use of instant.withMillis(long) is not allowed. Please use new Instant(long) instead.',
-     'patterns': [r".*: warning: \[JodaInstantWithMillis\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Use of JodaTime\'s type.plus(long) or type.minus(long) is not allowed (where \u003ctype> = {Duration,Instant,DateTime,DateMidnight}). Please use type.plus(Duration.millis(long)) or type.minus(Duration.millis(long)) instead.',
-     'patterns': [r".*: warning: \[JodaPlusMinusLong\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Changing JodaTime\'s current time is not allowed in non-testonly code.',
-     'patterns': [r".*: warning: \[JodaSetCurrentMillis\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Use of Joda-Time\'s DateTime.toDateTime(), Duration.toDuration(), Instant.toInstant(), Interval.toInterval(), and Period.toPeriod() are not allowed.',
-     'patterns': [r".*: warning: \[JodaToSelf\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Use of JodaTime\'s type.withDurationAdded(long, int) (where \u003ctype> = {Duration,Instant,DateTime}). Please use type.withDurationAdded(Duration.millis(long), int) instead.',
-     'patterns': [r".*: warning: \[JodaWithDurationAddedLong\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: LanguageCode comparison using reference equality instead of value equality',
-     'patterns': [r".*: warning: \[LanguageCodeEquality\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: The zero argument toString is not part of the Localizable interface and likely is just the java Object toString.  You probably want to call toString(Locale).',
-     'patterns': [r".*: warning: \[LocalizableWrongToString\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Period.get() only works with YEARS, MONTHS, or DAYS.',
-     'patterns': [r".*: warning: \[PeriodGetTemporalUnit\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Return value of methods returning Promise must be checked. Ignoring returned Promises suppresses exceptions thrown from the code that completes the Promises.',
-     'patterns': [r".*: warning: \[PromiseReturnValueIgnored\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: When returning a Promise, use thenChain() instead of then()',
-     'patterns': [r".*: warning: \[PromiseThenReturningPromise\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Streams.iterating() is unsafe for use except in the header of a for-each loop; please see its Javadoc for details.',
-     'patterns': [r".*: warning: \[StreamsIteratingNotInLoop\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: TemporalAccessor.get() only works for certain values of ChronoField.',
-     'patterns': [r".*: warning: \[TemporalAccessorGetChronoField\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Try-with-resources is not supported in this code, use try/finally instead',
-     'patterns': [r".*: warning: \[TryWithResources\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Adds checkOrThrow calls where needed',
-     'patterns': [r".*: warning: \[AddCheckOrThrow\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Equality on Nano protos (== or .equals) might not be the same in Lite',
-     'patterns': [r".*: warning: \[ForbidNanoEquality\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Submessages of a proto cannot be mutated',
-     'patterns': [r".*: warning: \[ForbidSubmessageMutation\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Repeated fields on proto messages cannot be directly referenced',
-     'patterns': [r".*: warning: \[NanoUnsafeRepeatedFieldUsage\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Requires that non-@enum int assignments to @enum ints is wrapped in a checkOrThrow',
-     'patterns': [r".*: warning: \[RequireCheckOrThrow\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Assignments into repeated field elements must be sequential',
-     'patterns': [r".*: warning: \[RequireSequentialRepeatedFields\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: Future.get in Google Now Producers code',
-     'patterns': [r".*: warning: \[FutureGetInNowProducers\] .+"]},
-    {'category': 'java',
-     'severity': Severity.HIGH,
-     'description':
-         'Java: @SimpleEnum applied to non-enum type',
-     'patterns': [r".*: warning: \[SimpleEnumUsage\] .+"]},
 
     # End warnings generated by Error Prone
 
@@ -2472,6 +2528,9 @@
     {'category': 'C/C++', 'severity': Severity.MEDIUM, 'option': '-Wunnamed-type-template-args',
      'description': 'Unnamed template type argument',
      'patterns': [r".*: warning: template argument.+Wunnamed-type-template-args"]},
+    {'category': 'C/C++', 'severity': Severity.MEDIUM, 'option': '-Wimplicit-fallthrough',
+     'description': 'Unannotated fall-through between switch labels',
+     'patterns': [r".*: warning: unannotated fall-through between switch labels.+Wimplicit-fallthrough"]},
 
     {'category': 'C/C++', 'severity': Severity.HARMLESS,
      'description': 'Discarded qualifier from pointer target type',
@@ -2513,6 +2572,29 @@
 
     # warnings from clang-tidy
     group_tidy_warn_pattern('android'),
+    simple_tidy_warn_pattern('bugprone-argument-comment'),
+    simple_tidy_warn_pattern('bugprone-copy-constructor-init'),
+    simple_tidy_warn_pattern('bugprone-fold-init-type'),
+    simple_tidy_warn_pattern('bugprone-forward-declaration-namespace'),
+    simple_tidy_warn_pattern('bugprone-forwarding-reference-overload'),
+    simple_tidy_warn_pattern('bugprone-inaccurate-erase'),
+    simple_tidy_warn_pattern('bugprone-incorrect-roundings'),
+    simple_tidy_warn_pattern('bugprone-integer-division'),
+    simple_tidy_warn_pattern('bugprone-lambda-function-name'),
+    simple_tidy_warn_pattern('bugprone-macro-parentheses'),
+    simple_tidy_warn_pattern('bugprone-misplaced-widening-cast'),
+    simple_tidy_warn_pattern('bugprone-move-forwarding-reference'),
+    simple_tidy_warn_pattern('bugprone-sizeof-expression'),
+    simple_tidy_warn_pattern('bugprone-string-constructor'),
+    simple_tidy_warn_pattern('bugprone-string-integer-assignment'),
+    simple_tidy_warn_pattern('bugprone-suspicious-enum-usage'),
+    simple_tidy_warn_pattern('bugprone-suspicious-missing-comma'),
+    simple_tidy_warn_pattern('bugprone-suspicious-string-compare'),
+    simple_tidy_warn_pattern('bugprone-suspicious-semicolon'),
+    simple_tidy_warn_pattern('bugprone-undefined-memory-manipulation'),
+    simple_tidy_warn_pattern('bugprone-unused-raii'),
+    simple_tidy_warn_pattern('bugprone-use-after-move'),
+    group_tidy_warn_pattern('bugprone'),
     group_tidy_warn_pattern('cert'),
     group_tidy_warn_pattern('clang-diagnostic'),
     group_tidy_warn_pattern('cppcoreguidelines'),
@@ -2635,7 +2717,6 @@
     simple_project_pattern('frameworks/av/cmds'),
     simple_project_pattern('frameworks/av/drm'),
     simple_project_pattern('frameworks/av/include'),
-    simple_project_pattern('frameworks/av/media/common_time'),
     simple_project_pattern('frameworks/av/media/img_utils'),
     simple_project_pattern('frameworks/av/media/libcpustats'),
     simple_project_pattern('frameworks/av/media/libeffects'),
@@ -2731,7 +2812,6 @@
     simple_project_pattern('system/extras/iotop'),
     simple_project_pattern('system/extras/libfec'),
     simple_project_pattern('system/extras/memory_replay'),
-    simple_project_pattern('system/extras/micro_bench'),
     simple_project_pattern('system/extras/mmap-perf'),
     simple_project_pattern('system/extras/multinetwork'),
     simple_project_pattern('system/extras/perfprofd'),
@@ -3006,6 +3086,7 @@
 
 
 def classify_one_warning(line, results):
+  """Classify one warning line."""
   for i in range(len(warn_patterns)):
     w = warn_patterns[i]
     for cpat in w['compiled_patterns']:
@@ -3331,6 +3412,14 @@
   print '];'
 
 
+# Emit a JavaScript const string array for HTML.
+def emit_const_html_string_array(name, array):
+  print 'const ' + name + ' = ['
+  for s in array:
+    print '"' + cgi.escape(strip_escape_string(s)) + '",'
+  print '];'
+
+
 # Emit a JavaScript const object array.
 def emit_const_object_array(name, array):
   print 'const ' + name + ' = ['
@@ -3349,11 +3438,11 @@
   emit_const_string_array('ProjectNames', project_names)
   emit_const_int_array('WarnPatternsSeverity',
                        [w['severity'] for w in warn_patterns])
-  emit_const_string_array('WarnPatternsDescription',
-                          [w['description'] for w in warn_patterns])
-  emit_const_string_array('WarnPatternsOption',
-                          [w['option'] for w in warn_patterns])
-  emit_const_string_array('WarningMessages', warning_messages)
+  emit_const_html_string_array('WarnPatternsDescription',
+                               [w['description'] for w in warn_patterns])
+  emit_const_html_string_array('WarnPatternsOption',
+                               [w['option'] for w in warn_patterns])
+  emit_const_html_string_array('WarningMessages', warning_messages)
   emit_const_object_array('Warnings', warning_records)
 
 draw_table_javascript = """
diff --git a/tools/zipalign/ZipAlign.cpp b/tools/zipalign/ZipAlign.cpp
index d56ac29..eea1749 100644
--- a/tools/zipalign/ZipAlign.cpp
+++ b/tools/zipalign/ZipAlign.cpp
@@ -102,7 +102,7 @@
              * file position in the new file will be equal to the file
              * position in the original.
              */
-            long newOffset = pEntry->getFileOffset() + bias;
+            off_t newOffset = pEntry->getFileOffset() + bias;
             padding = (alignTo - (newOffset % alignTo)) % alignTo;
 
             //printf("--- %s: orig at %ld(+%d) len=%ld, adding pad=%d\n",
@@ -111,7 +111,7 @@
             status = pZout->add(pZin, pEntry, padding, &pNewEntry);
         }
 
-        if (status != NO_ERROR)
+        if (status != OK)
             return 1;
         bias += padding;
         //printf(" added '%s' at %ld (pad=%d)\n",
@@ -146,13 +146,13 @@
         return 1;
     }
 
-    if (zin.open(inFileName, ZipFile::kOpenReadOnly) != NO_ERROR) {
+    if (zin.open(inFileName, ZipFile::kOpenReadOnly) != OK) {
         fprintf(stderr, "Unable to open '%s' as zip archive\n", inFileName);
         return 1;
     }
     if (zout.open(outFileName,
             ZipFile::kOpenReadWrite|ZipFile::kOpenCreate|ZipFile::kOpenTruncate)
-        != NO_ERROR)
+        != OK)
     {
         fprintf(stderr, "Unable to open '%s' as zip archive\n", outFileName);
         return 1;
@@ -178,7 +178,7 @@
     if (verbose)
         printf("Verifying alignment of %s (%d)...\n", fileName, alignment);
 
-    if (zipFile.open(fileName, ZipFile::kOpenReadOnly) != NO_ERROR) {
+    if (zipFile.open(fileName, ZipFile::kOpenReadOnly) != OK) {
         fprintf(stderr, "Unable to open '%s' for verification\n", fileName);
         return 1;
     }
@@ -190,23 +190,23 @@
         pEntry = zipFile.getEntryByIndex(i);
         if (pEntry->isCompressed()) {
             if (verbose) {
-                printf("%8ld %s (OK - compressed)\n",
-                    (long) pEntry->getFileOffset(), pEntry->getFileName());
+                printf("%8jd %s (OK - compressed)\n",
+                    (intmax_t) pEntry->getFileOffset(), pEntry->getFileName());
             }
         } else {
-            long offset = pEntry->getFileOffset();
+            off_t offset = pEntry->getFileOffset();
             const int alignTo = getAlignment(pageAlignSharedLibs, alignment, pEntry);
             if ((offset % alignTo) != 0) {
                 if (verbose) {
-                    printf("%8ld %s (BAD - %ld)\n",
-                        (long) offset, pEntry->getFileName(),
-                        offset % alignTo);
+                    printf("%8jd %s (BAD - %jd)\n",
+                        (intmax_t) offset, pEntry->getFileName(),
+                        (intmax_t) (offset % alignTo));
                 }
                 foundBad = true;
             } else {
                 if (verbose) {
-                    printf("%8ld %s (OK)\n",
-                        (long) offset, pEntry->getFileName());
+                    printf("%8jd %s (OK)\n",
+                        (intmax_t) offset, pEntry->getFileName());
                 }
             }
         }
diff --git a/tools/zipalign/ZipEntry.cpp b/tools/zipalign/ZipEntry.cpp
index 63d75d1..810d74a 100644
--- a/tools/zipalign/ZipEntry.cpp
+++ b/tools/zipalign/ZipEntry.cpp
@@ -41,14 +41,14 @@
 status_t ZipEntry::initFromCDE(FILE* fp)
 {
     status_t result;
-    long posn;
+    long posn; // NOLINT(google-runtime-int), for ftell/fseek
     bool hasDD;
 
     //ALOGV("initFromCDE ---\n");
 
     /* read the CDE */
     result = mCDE.read(fp);
-    if (result != NO_ERROR) {
+    if (result != OK) {
         ALOGD("mCDE.read failed\n");
         return result;
     }
@@ -64,7 +64,7 @@
     }
 
     result = mLFH.read(fp);
-    if (result != NO_ERROR) {
+    if (result != OK) {
         ALOGD("mLFH.read failed\n");
         return result;
     }
@@ -103,7 +103,7 @@
      * can defer worrying about that to when we're extracting data.
      */
 
-    return NO_ERROR;
+    return OK;
 }
 
 /*
@@ -189,7 +189,7 @@
             mLFH.mExtraFieldLength+1);
     }
 
-    return NO_ERROR;
+    return OK;
 }
 
 /*
@@ -225,7 +225,7 @@
         mLFH.mExtraFieldLength = padding;
     }
 
-    return NO_ERROR;
+    return OK;
 }
 
 /*
@@ -258,8 +258,8 @@
 /*
  * Set some information about a file after we add it.
  */
-void ZipEntry::setDataInfo(long uncompLen, long compLen, uint32_t crc32,
-    int compressionMethod)
+void ZipEntry::setDataInfo(uint32_t uncompLen, uint32_t compLen, uint32_t crc32,
+    uint32_t compressionMethod)
 {
     mCDE.mCompressionMethod = compressionMethod;
     mCDE.mCRC32 = crc32;
@@ -367,7 +367,7 @@
     struct tm* ptm;
 
     /* round up to an even number of seconds */
-    even = (time_t)(((unsigned long)(when) + 1) & (~1));
+    even = (when & 1) ? (when + 1) : when;
 
     /* expand */
 #if !defined(_WIN32)
@@ -403,7 +403,7 @@
  */
 status_t ZipEntry::LocalFileHeader::read(FILE* fp)
 {
-    status_t result = NO_ERROR;
+    status_t result = OK;
     uint8_t buf[kLFHLen];
 
     assert(mFileName == NULL);
@@ -499,7 +499,7 @@
             return UNKNOWN_ERROR;
     }
 
-    return NO_ERROR;
+    return OK;
 }
 
 
@@ -537,7 +537,7 @@
  */
 status_t ZipEntry::CentralDirEntry::read(FILE* fp)
 {
-    status_t result = NO_ERROR;
+    status_t result = OK;
     uint8_t buf[kCDELen];
 
     /* no re-use */
@@ -669,7 +669,7 @@
             return UNKNOWN_ERROR;
     }
 
-    return NO_ERROR;
+    return OK;
 }
 
 /*
diff --git a/tools/zipalign/ZipEntry.h b/tools/zipalign/ZipEntry.h
index 247cf69..4c7e18c 100644
--- a/tools/zipalign/ZipEntry.h
+++ b/tools/zipalign/ZipEntry.h
@@ -179,8 +179,8 @@
     /*
      * Set information about the data for this entry.
      */
-    void setDataInfo(long uncompLen, long compLen, uint32_t crc32,
-        int compressionMethod);
+    void setDataInfo(uint32_t uncompLen, uint32_t compLen, uint32_t crc32,
+        uint32_t compressionMethod);
 
     /*
      * Set the modification date.
diff --git a/tools/zipalign/ZipFile.cpp b/tools/zipalign/ZipFile.cpp
index 43bc9bf..63fb962 100644
--- a/tools/zipalign/ZipFile.cpp
+++ b/tools/zipalign/ZipFile.cpp
@@ -120,7 +120,7 @@
          * have a need for empty zip files.)
          */
         mNeedCDRewrite = true;
-        result = NO_ERROR;
+        result = OK;
     }
 
     if (flags & kOpenReadOnly)
@@ -205,7 +205,7 @@
  */
 status_t ZipFile::readCentralDir(void)
 {
-    status_t result = NO_ERROR;
+    status_t result = OK;
     uint8_t* buf = NULL;
     off_t fileLength, seekStart;
     long readAmount;
@@ -267,7 +267,7 @@
 
     /* extract eocd values */
     result = mEOCD.readBuf(buf + i, readAmount - i);
-    if (result != NO_ERROR) {
+    if (result != OK) {
         ALOGD("Failure reading %ld bytes of EOCD values", readAmount - i);
         goto bail;
     }
@@ -311,7 +311,7 @@
         ZipEntry* pEntry = new ZipEntry;
 
         result = pEntry->initFromCDE(mZipFp);
-        if (result != NO_ERROR) {
+        if (result != OK) {
             ALOGD("initFromCDE failed\n");
             delete pEntry;
             goto bail;
@@ -361,7 +361,7 @@
     const char* storageName, int compressionMethod, ZipEntry** ppEntry)
 {
     ZipEntry* pEntry = NULL;
-    status_t result = NO_ERROR;
+    status_t result = OK;
     long lfhPosn, startPosn, endPosn, uncompressedLen;
     FILE* inputFp = NULL;
     uint32_t crc;
@@ -415,7 +415,7 @@
     if (compressionMethod == ZipEntry::kCompressDeflated) {
         bool failed = false;
         result = compressFpToFp(mZipFp, inputFp, data, size, &crc);
-        if (result != NO_ERROR) {
+        if (result != OK) {
             ALOGD("compression failed, storing\n");
             failed = true;
         } else {
@@ -447,7 +447,7 @@
         } else {
             result = copyDataToFp(mZipFp, data, size, &crc);
         }
-        if (result != NO_ERROR) {
+        if (result != OK) {
             // don't need to truncate; happens in CDE rewrite
             ALOGD("failed copying data in\n");
             goto bail;
@@ -535,11 +535,11 @@
     }
 
     result = pEntry->initFromExternal(pSourceEntry);
-    if (result != NO_ERROR)
+    if (result != OK)
         goto bail;
     if (padding != 0) {
         result = pEntry->addPadding(padding);
-        if (result != NO_ERROR)
+        if (result != OK)
             goto bail;
     }
 
@@ -574,7 +574,7 @@
         copyLen += ZipEntry::kDataDescriptorLen;
 
     if (copyPartialFpToFp(mZipFp, pSourceZip->mZipFp, copyLen, NULL)
-        != NO_ERROR)
+        != OK)
     {
         ALOGW("copy of '%s' failed\n", pEntry->mCDE.mFileName);
         result = UNKNOWN_ERROR;
@@ -603,7 +603,7 @@
         *ppEntry = pEntry;
     pEntry = NULL;
 
-    result = NO_ERROR;
+    result = OK;
 
 bail:
     delete pEntry;
@@ -642,7 +642,7 @@
     }
 
     result = pEntry->initFromExternal(pSourceEntry);
-    if (result != NO_ERROR)
+    if (result != OK)
         goto bail;
 
     /*
@@ -682,7 +682,7 @@
         }
         long startPosn = ftell(mZipFp);
         uint32_t crc;
-        if (compressFpToFp(mZipFp, NULL, buf, uncompressedLen, &crc) != NO_ERROR) {
+        if (compressFpToFp(mZipFp, NULL, buf, uncompressedLen, &crc) != OK) {
             ALOGW("recompress of '%s' failed\n", pEntry->mCDE.mFileName);
             result = UNKNOWN_ERROR;
             free(buf);
@@ -699,7 +699,7 @@
             copyLen += ZipEntry::kDataDescriptorLen;
 
         if (copyPartialFpToFp(mZipFp, pSourceZip->mZipFp, copyLen, NULL)
-            != NO_ERROR)
+            != OK)
         {
             ALOGW("copy of '%s' failed\n", pEntry->mCDE.mFileName);
             result = UNKNOWN_ERROR;
@@ -738,7 +738,7 @@
         *ppEntry = pEntry;
     pEntry = NULL;
 
-    result = NO_ERROR;
+    result = OK;
 
 bail:
     delete pEntry;
@@ -773,7 +773,7 @@
         }
     }
 
-    return NO_ERROR;
+    return OK;
 }
 
 /*
@@ -793,7 +793,7 @@
         }
     }
 
-    return NO_ERROR;
+    return OK;
 }
 
 /*
@@ -804,7 +804,7 @@
  * On exit, "srcFp" will be seeked to the end of the file, and "dstFp"
  * will be seeked immediately past the data just written.
  */
-status_t ZipFile::copyPartialFpToFp(FILE* dstFp, FILE* srcFp, long length,
+status_t ZipFile::copyPartialFpToFp(FILE* dstFp, FILE* srcFp, size_t length,
     uint32_t* pCRC32)
 {
     uint8_t tmpBuf[32768];
@@ -814,14 +814,14 @@
         *pCRC32 = crc32(0L, Z_NULL, 0);
 
     while (length) {
-        long readSize;
+        size_t readSize;
 
         readSize = sizeof(tmpBuf);
         if (readSize > length)
             readSize = length;
 
         count = fread(tmpBuf, 1, readSize, srcFp);
-        if ((long) count != readSize) {     // error or unexpected EOF
+        if (count != readSize) {     // error or unexpected EOF
             ALOGD("fread %d bytes failed\n", (int) readSize);
             return UNKNOWN_ERROR;
         }
@@ -837,7 +837,7 @@
         length -= readSize;
     }
 
-    return NO_ERROR;
+    return OK;
 }
 
 /*
@@ -849,7 +849,7 @@
 status_t ZipFile::compressFpToFp(FILE* dstFp, FILE* srcFp,
     const void* data, size_t size, uint32_t* pCRC32)
 {
-    status_t result = NO_ERROR;
+    status_t result = OK;
     const size_t kBufSize = 1024 * 1024;
     uint8_t* inBuf = NULL;
     uint8_t* outBuf = NULL;
@@ -933,7 +933,7 @@
     /* mark entry as deleted, and mark archive as dirty */
     pEntry->setDeleted();
     mNeedCDRewrite = true;
-    return NO_ERROR;
+    return OK;
 }
 
 /*
@@ -944,19 +944,19 @@
  */
 status_t ZipFile::flush(void)
 {
-    status_t result = NO_ERROR;
+    status_t result = OK;
     long eocdPosn;
     int i, count;
 
     if (mReadOnly)
         return INVALID_OPERATION;
     if (!mNeedCDRewrite)
-        return NO_ERROR;
+        return OK;
 
     assert(mZipFp != NULL);
 
     result = crunchArchive();
-    if (result != NO_ERROR)
+    if (result != OK)
         return result;
 
     if (fseek(mZipFp, mEOCD.mCentralDirOffset, SEEK_SET) != 0)
@@ -986,7 +986,7 @@
     /* should we clear the "newly added" flag in all entries now? */
 
     mNeedCDRewrite = false;
-    return NO_ERROR;
+    return OK;
 }
 
 /*
@@ -997,7 +997,7 @@
  */
 status_t ZipFile::crunchArchive(void)
 {
-    status_t result = NO_ERROR;
+    status_t result = OK;
     int i, count;
     long delCount, adjust;
 
@@ -1065,7 +1065,7 @@
             //    pEntry->getFileName(), adjust);
             result = filemove(mZipFp, pEntry->getLFHOffset() - adjust,
                         pEntry->getLFHOffset(), span);
-            if (result != NO_ERROR) {
+            if (result != OK) {
                 /* this is why you use a temp file */
                 ALOGE("error during crunch - archive is toast\n");
                 return result;
@@ -1097,7 +1097,7 @@
 status_t ZipFile::filemove(FILE* fp, off_t dst, off_t src, size_t n)
 {
     if (dst == src || n <= 0)
-        return NO_ERROR;
+        return OK;
 
     uint8_t readBuf[32768];
 
@@ -1140,7 +1140,7 @@
         return UNKNOWN_ERROR;
     }
 
-    return NO_ERROR;
+    return OK;
 }
 
 
@@ -1355,7 +1355,7 @@
         memcpy(mComment, buf + kEOCDLen, mCommentLen);
     }
 
-    return NO_ERROR;
+    return OK;
 }
 
 /*
@@ -1382,7 +1382,7 @@
             return UNKNOWN_ERROR;
     }
 
-    return NO_ERROR;
+    return OK;
 }
 
 /*
diff --git a/tools/zipalign/ZipFile.h b/tools/zipalign/ZipFile.h
index d5ace7c..11d20c5 100644
--- a/tools/zipalign/ZipFile.h
+++ b/tools/zipalign/ZipFile.h
@@ -224,7 +224,7 @@
     status_t copyDataToFp(FILE* dstFp,
         const void* data, size_t size, uint32_t* pCRC32);
     /* copy some of "srcFp" into "dstFp" */
-    status_t copyPartialFpToFp(FILE* dstFp, FILE* srcFp, long length,
+    status_t copyPartialFpToFp(FILE* dstFp, FILE* srcFp, size_t length,
         uint32_t* pCRC32);
     /* like memmove(), but on parts of a single file */
     status_t filemove(FILE* fp, off_t dest, off_t src, size_t n);