| # |
| # Copyright (C) 2008 The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| ## |
| ## Common build system definitions. Mostly standard |
| ## commands for building various types of targets, which |
| ## are used by others to construct the final targets. |
| ## |
| |
| # These are variables we use to collect overall lists |
| # of things being processed. |
| |
| # Full paths to all of the documentation |
| ALL_DOCS:= |
| |
| # The short names of all of the targets in the system. |
| # For each element of ALL_MODULES, two other variables |
| # are defined: |
| # $(ALL_MODULES.$(target)).BUILT |
| # $(ALL_MODULES.$(target)).INSTALLED |
| # The BUILT variable contains LOCAL_BUILT_MODULE for that |
| # target, and the INSTALLED variable contains the LOCAL_INSTALLED_MODULE. |
| # Some targets may have multiple files listed in the BUILT and INSTALLED |
| # sub-variables. |
| ALL_MODULES:= |
| |
| # Full paths to targets that should be added to the "make droid" |
| # set of installed targets. |
| ALL_DEFAULT_INSTALLED_MODULES:= |
| |
| # The list of tags that have been defined by |
| # LOCAL_MODULE_TAGS. Each word in this variable maps |
| # to a corresponding ALL_MODULE_TAGS.<tagname> variable |
| # that contains all of the INSTALLED_MODULEs with that tag. |
| ALL_MODULE_TAGS:= |
| |
| # Similar to ALL_MODULE_TAGS, but contains the short names |
| # of all targets for a particular tag. The top-level variable |
| # won't have the list of tags; ust ALL_MODULE_TAGS to get |
| # the list of all known tags. (This means that this variable |
| # will always be empty; it's just here as a placeholder for |
| # its sub-variables.) |
| ALL_MODULE_NAME_TAGS:= |
| |
| # Full paths to all prebuilt files that will be copied |
| # (used to make the dependency on acp) |
| ALL_PREBUILT:= |
| |
| # Full path to all files that are made by some tool |
| ALL_GENERATED_SOURCES:= |
| |
| # Full path to all asm, C, C++, lex and yacc generated C files. |
| # These all have an order-only dependency on the copied headers |
| ALL_C_CPP_ETC_OBJECTS:= |
| |
| # The list of dynamic binaries that haven't been stripped/compressed/etc. |
| ALL_ORIGINAL_DYNAMIC_BINARIES:= |
| |
| # These files go into the SDK |
| ALL_SDK_FILES:= |
| |
| # Files for dalvik. This is often build without building the rest of the OS. |
| INTERNAL_DALVIK_MODULES:= |
| |
| # All findbugs xml files |
| ALL_FINDBUGS_FILES:= |
| |
| # GPL module license files |
| ALL_GPL_MODULE_LICENSE_FILES:= |
| |
| # Target and host installed module's dependencies on shared libraries. |
| # They are list of "<module_name>:<installed_file>:lib1,lib2...". |
| TARGET_DEPENDENCIES_ON_SHARED_LIBRARIES := |
| 2ND_TARGET_DEPENDENCIES_ON_SHARED_LIBRARIES := |
| HOST_DEPENDENCIES_ON_SHARED_LIBRARIES := |
| |
| # Generated class file names for Android resource. |
| # They are escaped and quoted so can be passed safely to a bash command. |
| ANDROID_RESOURCE_GENERATED_CLASSES := 'R.class' 'R$$*.class' 'Manifest.class' 'Manifest$$*.class' |
| |
| ########################################################### |
| ## Debugging; prints a variable list to stdout |
| ########################################################### |
| |
| # $(1): variable name list, not variable values |
| define print-vars |
| $(foreach var,$(1), \ |
| $(info $(var):) \ |
| $(foreach word,$($(var)), \ |
| $(info $(space)$(space)$(word)) \ |
| ) \ |
| ) |
| endef |
| |
| ########################################################### |
| ## Evaluates to true if the string contains the word true, |
| ## and empty otherwise |
| ## $(1): a var to test |
| ########################################################### |
| |
| define true-or-empty |
| $(filter true, $(1)) |
| endef |
| |
| |
| ########################################################### |
| ## Retrieve the directory of the current makefile |
| ########################################################### |
| |
| # Figure out where we are. |
| define my-dir |
| $(strip \ |
| $(eval LOCAL_MODULE_MAKEFILE := $$(lastword $$(MAKEFILE_LIST))) \ |
| $(if $(filter $(CLEAR_VARS),$(LOCAL_MODULE_MAKEFILE)), \ |
| $(error LOCAL_PATH must be set before including $$(CLEAR_VARS)) \ |
| , \ |
| $(patsubst %/,%,$(dir $(LOCAL_MODULE_MAKEFILE))) \ |
| ) \ |
| ) |
| endef |
| |
| ########################################################### |
| ## Retrieve a list of all makefiles immediately below some directory |
| ########################################################### |
| |
| define all-makefiles-under |
| $(wildcard $(1)/*/Android.mk) |
| endef |
| |
| ########################################################### |
| ## Look under a directory for makefiles that don't have parent |
| ## makefiles. |
| ########################################################### |
| |
| # $(1): directory to search under |
| # Ignores $(1)/Android.mk |
| define first-makefiles-under |
| $(shell build/tools/findleaves.py --prune=$(OUT_DIR) --prune=.repo --prune=.git \ |
| --mindepth=2 $(1) Android.mk) |
| endef |
| |
| ########################################################### |
| ## Retrieve a list of all makefiles immediately below your directory |
| ########################################################### |
| |
| define all-subdir-makefiles |
| $(call all-makefiles-under,$(call my-dir)) |
| endef |
| |
| ########################################################### |
| ## Look in the named list of directories for makefiles, |
| ## relative to the current directory. |
| ########################################################### |
| |
| # $(1): List of directories to look for under this directory |
| define all-named-subdir-makefiles |
| $(wildcard $(addsuffix /Android.mk, $(addprefix $(call my-dir)/,$(1)))) |
| endef |
| |
| ########################################################### |
| ## Find all of the java files under the named directories. |
| ## Meant to be used like: |
| ## SRC_FILES := $(call all-java-files-under,src tests) |
| ########################################################### |
| |
| define all-java-files-under |
| $(patsubst ./%,%, \ |
| $(shell cd $(LOCAL_PATH) ; \ |
| find -L $(1) -name "*.java" -and -not -name ".*") \ |
| ) |
| endef |
| |
| ########################################################### |
| ## Find all of the java files from here. Meant to be used like: |
| ## SRC_FILES := $(call all-subdir-java-files) |
| ########################################################### |
| |
| define all-subdir-java-files |
| $(call all-java-files-under,.) |
| endef |
| |
| ########################################################### |
| ## Find all of the c files under the named directories. |
| ## Meant to be used like: |
| ## SRC_FILES := $(call all-c-files-under,src tests) |
| ########################################################### |
| |
| define all-c-files-under |
| $(patsubst ./%,%, \ |
| $(shell cd $(LOCAL_PATH) ; \ |
| find -L $(1) -name "*.c" -and -not -name ".*") \ |
| ) |
| endef |
| |
| ########################################################### |
| ## Find all of the c files from here. Meant to be used like: |
| ## SRC_FILES := $(call all-subdir-c-files) |
| ########################################################### |
| |
| define all-subdir-c-files |
| $(call all-c-files-under,.) |
| endef |
| |
| ########################################################### |
| ## Find all files named "I*.aidl" under the named directories, |
| ## which must be relative to $(LOCAL_PATH). The returned list |
| ## is relative to $(LOCAL_PATH). |
| ########################################################### |
| |
| define all-Iaidl-files-under |
| $(patsubst ./%,%, \ |
| $(shell cd $(LOCAL_PATH) ; \ |
| find -L $(1) -name "I*.aidl" -and -not -name ".*") \ |
| ) |
| endef |
| |
| ########################################################### |
| ## Find all of the "I*.aidl" files under $(LOCAL_PATH). |
| ########################################################### |
| |
| define all-subdir-Iaidl-files |
| $(call all-Iaidl-files-under,.) |
| endef |
| |
| ########################################################### |
| ## Find all of the logtags files under the named directories. |
| ## Meant to be used like: |
| ## SRC_FILES := $(call all-logtags-files-under,src) |
| ########################################################### |
| |
| define all-logtags-files-under |
| $(patsubst ./%,%, \ |
| $(shell cd $(LOCAL_PATH) ; \ |
| find -L $(1) -name "*.logtags" -and -not -name ".*") \ |
| ) |
| endef |
| |
| ########################################################### |
| ## Find all of the .proto files under the named directories. |
| ## Meant to be used like: |
| ## SRC_FILES := $(call all-proto-files-under,src) |
| ########################################################### |
| |
| define all-proto-files-under |
| $(patsubst ./%,%, \ |
| $(shell cd $(LOCAL_PATH) ; \ |
| find -L $(1) -name "*.proto" -and -not -name ".*") \ |
| ) |
| endef |
| |
| ########################################################### |
| ## Find all of the RenderScript files under the named directories. |
| ## Meant to be used like: |
| ## SRC_FILES := $(call all-renderscript-files-under,src) |
| ########################################################### |
| |
| define all-renderscript-files-under |
| $(patsubst ./%,%, \ |
| $(shell cd $(LOCAL_PATH) ; \ |
| find -L $(1) \( -name "*.rs" -or -name "*.fs" \) -and -not -name ".*") \ |
| ) |
| endef |
| |
| ########################################################### |
| ## Find all of the html files under the named directories. |
| ## Meant to be used like: |
| ## SRC_FILES := $(call all-html-files-under,src tests) |
| ########################################################### |
| |
| define all-html-files-under |
| $(patsubst ./%,%, \ |
| $(shell cd $(LOCAL_PATH) ; \ |
| find -L $(1) -name "*.html" -and -not -name ".*") \ |
| ) |
| endef |
| |
| ########################################################### |
| ## Find all of the html files from here. Meant to be used like: |
| ## SRC_FILES := $(call all-subdir-html-files) |
| ########################################################### |
| |
| define all-subdir-html-files |
| $(call all-html-files-under,.) |
| endef |
| |
| ########################################################### |
| ## Find all of the files matching pattern |
| ## SRC_FILES := $(call find-subdir-files, <pattern>) |
| ########################################################### |
| |
| define find-subdir-files |
| $(patsubst ./%,%,$(shell cd $(LOCAL_PATH) ; find -L $(1))) |
| endef |
| |
| ########################################################### |
| # find the files in the subdirectory $1 of LOCAL_DIR |
| # matching pattern $2, filtering out files $3 |
| # e.g. |
| # SRC_FILES += $(call find-subdir-subdir-files, \ |
| # css, *.cpp, DontWantThis.cpp) |
| ########################################################### |
| |
| define find-subdir-subdir-files |
| $(filter-out $(patsubst %,$(1)/%,$(3)),$(patsubst ./%,%,$(shell cd \ |
| $(LOCAL_PATH) ; find -L $(1) -maxdepth 1 -name $(2)))) |
| endef |
| |
| ########################################################### |
| ## Find all of the files matching pattern |
| ## SRC_FILES := $(call all-subdir-java-files) |
| ########################################################### |
| |
| define find-subdir-assets |
| $(if $(1),$(patsubst ./%,%, \ |
| $(shell if [ -d $(1) ] ; then cd $(1) ; find ./ -not -name '.*' -and -type f -and -not -type l ; fi)), \ |
| $(warning Empty argument supplied to find-subdir-assets) \ |
| ) |
| endef |
| |
| ########################################################### |
| ## Find various file types in a list of directories relative to $(LOCAL_PATH) |
| ########################################################### |
| |
| define find-other-java-files |
| $(call find-subdir-files,$(1) -name "*.java" -and -not -name ".*") |
| endef |
| |
| define find-other-html-files |
| $(call find-subdir-files,$(1) -name "*.html" -and -not -name ".*") |
| endef |
| |
| ########################################################### |
| # Use utility find to find given files in the given subdirs. |
| # This function uses $(1), instead of LOCAL_PATH as the base. |
| # $(1): the base dir, relative to the root of the source tree. |
| # $(2): the file name pattern to be passed to find as "-name". |
| # $(3): a list of subdirs of the base dir. |
| # Returns: a list of paths relative to the base dir. |
| ########################################################### |
| |
| define find-files-in-subdirs |
| $(patsubst ./%,%, \ |
| $(shell cd $(1) ; \ |
| find -L $(3) -name $(2) -and -not -name ".*") \ |
| ) |
| endef |
| |
| ########################################################### |
| ## Scan through each directory of $(1) looking for files |
| ## that match $(2) using $(wildcard). Useful for seeing if |
| ## a given directory or one of its parents contains |
| ## a particular file. Returns the first match found, |
| ## starting furthest from the root. |
| ########################################################### |
| |
| define find-parent-file |
| $(strip \ |
| $(eval _fpf := $(wildcard $(foreach f, $(2), $(strip $(1))/$(f)))) \ |
| $(if $(_fpf),$(_fpf), \ |
| $(if $(filter-out ./ .,$(1)), \ |
| $(call find-parent-file,$(patsubst %/,%,$(dir $(1))),$(2)) \ |
| ) \ |
| ) \ |
| ) |
| endef |
| |
| ########################################################### |
| ## Function we can evaluate to introduce a dynamic dependency |
| ########################################################### |
| |
| define add-dependency |
| $(1): $(2) |
| endef |
| |
| ########################################################### |
| ## Set up the dependencies for a prebuilt target |
| ## $(call add-prebuilt-file, srcfile, [targetclass]) |
| ########################################################### |
| |
| define add-prebuilt-file |
| $(eval $(include-prebuilt)) |
| endef |
| |
| define include-prebuilt |
| include $$(CLEAR_VARS) |
| LOCAL_SRC_FILES := $(1) |
| LOCAL_BUILT_MODULE_STEM := $(1) |
| LOCAL_MODULE_SUFFIX := $$(suffix $(1)) |
| LOCAL_MODULE := $$(basename $(1)) |
| LOCAL_MODULE_CLASS := $(2) |
| include $$(BUILD_PREBUILT) |
| endef |
| |
| ########################################################### |
| ## do multiple prebuilts |
| ## $(call target class, files ...) |
| ########################################################### |
| |
| define add-prebuilt-files |
| $(foreach f,$(2),$(call add-prebuilt-file,$f,$(1))) |
| endef |
| |
| |
| |
| ########################################################### |
| ## The intermediates directory. Where object files go for |
| ## a given target. We could technically get away without |
| ## the "_intermediates" suffix on the directory, but it's |
| ## nice to be able to grep for that string to find out if |
| ## anyone's abusing the system. |
| ########################################################### |
| |
| # $(1): target class, like "APPS" |
| # $(2): target name, like "NotePad" |
| # $(3): if non-empty, this is a HOST target. |
| # $(4): if non-empty, force the intermediates to be COMMON |
| # $(5): if non-empty, force the intermedistes to be for the 2nd arch |
| define intermediates-dir-for |
| $(strip \ |
| $(eval _idfClass := $(strip $(1))) \ |
| $(if $(_idfClass),, \ |
| $(error $(LOCAL_PATH): Class not defined in call to intermediates-dir-for)) \ |
| $(eval _idfName := $(strip $(2))) \ |
| $(if $(_idfName),, \ |
| $(error $(LOCAL_PATH): Name not defined in call to intermediates-dir-for)) \ |
| $(eval _idfPrefix := $(if $(strip $(3)),HOST,TARGET)) \ |
| $(eval _idf2ndArchPrefix := $(if $(strip $(5)),$(TARGET_2ND_ARCH_VAR_PREFIX))) \ |
| $(if $(filter $(_idfPrefix)-$(_idfClass),$(COMMON_MODULE_CLASSES))$(4), \ |
| $(eval _idfIntBase := $($(_idfPrefix)_OUT_COMMON_INTERMEDIATES)) \ |
| , \ |
| $(eval _idfIntBase := $($(_idf2ndArchPrefix)$(_idfPrefix)_OUT_INTERMEDIATES)) \ |
| ) \ |
| $(_idfIntBase)/$(_idfClass)/$(_idfName)_intermediates \ |
| ) |
| endef |
| |
| # Uses LOCAL_MODULE_CLASS, LOCAL_MODULE, and LOCAL_IS_HOST_MODULE |
| # to determine the intermediates directory. |
| # |
| # $(1): if non-empty, force the intermediates to be COMMON |
| # $(2): if non-empty, force the intermediates to be for the 2nd arch |
| define local-intermediates-dir |
| $(strip \ |
| $(if $(strip $(LOCAL_MODULE_CLASS)),, \ |
| $(error $(LOCAL_PATH): LOCAL_MODULE_CLASS not defined before call to local-intermediates-dir)) \ |
| $(if $(strip $(LOCAL_MODULE)),, \ |
| $(error $(LOCAL_PATH): LOCAL_MODULE not defined before call to local-intermediates-dir)) \ |
| $(call intermediates-dir-for,$(LOCAL_MODULE_CLASS),$(LOCAL_MODULE),$(LOCAL_IS_HOST_MODULE),$(1),$(2)) \ |
| ) |
| endef |
| |
| ########################################################### |
| ## The generated sources directory. Placing generated |
| ## source files directly in the intermediates directory |
| ## causes problems for multiarch builds, where there are |
| ## two intermediates directories for a single target. Put |
| ## them in a separate directory, and they will be copied to |
| ## each intermediates directory automatically. |
| ########################################################### |
| |
| # $(1): target class, like "APPS" |
| # $(2): target name, like "NotePad" |
| # $(3): if non-empty, this is a HOST target. |
| # $(4): if non-empty, force the generated sources to be COMMON |
| define generated-sources-dir-for |
| $(strip \ |
| $(eval _idfClass := $(strip $(1))) \ |
| $(if $(_idfClass),, \ |
| $(error $(LOCAL_PATH): Class not defined in call to generated-sources-dir-for)) \ |
| $(eval _idfName := $(strip $(2))) \ |
| $(if $(_idfName),, \ |
| $(error $(LOCAL_PATH): Name not defined in call to generated-sources-dir-for)) \ |
| $(eval _idfPrefix := $(if $(strip $(3)),HOST,TARGET)) \ |
| $(if $(filter $(_idfPrefix)-$(_idfClass),$(COMMON_MODULE_CLASSES))$(4), \ |
| $(eval _idfIntBase := $($(_idfPrefix)_OUT_GEN_COMMON)) \ |
| , \ |
| $(eval _idfIntBase := $($(_idfPrefix)_OUT_GEN)) \ |
| ) \ |
| $(_idfIntBase)/$(_idfClass)/$(_idfName)_intermediates \ |
| ) |
| endef |
| |
| # Uses LOCAL_MODULE_CLASS, LOCAL_MODULE, and LOCAL_IS_HOST_MODULE |
| # to determine the generated sources directory. |
| # |
| # $(1): if non-empty, force the intermediates to be COMMON |
| define local-generated-sources-dir |
| $(strip \ |
| $(if $(strip $(LOCAL_MODULE_CLASS)),, \ |
| $(error $(LOCAL_PATH): LOCAL_MODULE_CLASS not defined before call to local-generated-sources-dir)) \ |
| $(if $(strip $(LOCAL_MODULE)),, \ |
| $(error $(LOCAL_PATH): LOCAL_MODULE not defined before call to local-generated-sources-dir)) \ |
| $(call generated-sources-dir-for,$(LOCAL_MODULE_CLASS),$(LOCAL_MODULE),$(LOCAL_IS_HOST_MODULE),$(1)) \ |
| ) |
| endef |
| |
| ########################################################### |
| ## Convert "path/to/libXXX.so" to "-lXXX". |
| ## Any "path/to/libXXX.a" elements pass through unchanged. |
| ########################################################### |
| |
| define normalize-libraries |
| $(foreach so,$(filter %.so,$(1)),-l$(patsubst lib%.so,%,$(notdir $(so))))\ |
| $(filter-out %.so,$(1)) |
| endef |
| |
| # TODO: change users to call the common version. |
| define normalize-host-libraries |
| $(call normalize-libraries,$(1)) |
| endef |
| |
| define normalize-target-libraries |
| $(call normalize-libraries,$(1)) |
| endef |
| |
| ########################################################### |
| ## Convert a list of short module names (e.g., "framework", "Browser") |
| ## into the list of files that are built for those modules. |
| ## NOTE: this won't return reliable results until after all |
| ## sub-makefiles have been included. |
| ## $(1): target list |
| ########################################################### |
| |
| define module-built-files |
| $(foreach module,$(1),$(ALL_MODULES.$(module).BUILT)) |
| endef |
| |
| ########################################################### |
| ## Convert a list of short modules names (e.g., "framework", "Browser") |
| ## into the list of files that are installed for those modules. |
| ## NOTE: this won't return reliable results until after all |
| ## sub-makefiles have been included. |
| ## $(1): target list |
| ########################################################### |
| |
| define module-installed-files |
| $(foreach module,$(1),$(ALL_MODULES.$(module).INSTALLED)) |
| endef |
| |
| ########################################################### |
| ## Convert a list of short modules names (e.g., "framework", "Browser") |
| ## into the list of files that should be used when linking |
| ## against that module as a public API. |
| ## TODO: Allow this for more than JAVA_LIBRARIES modules |
| ## NOTE: this won't return reliable results until after all |
| ## sub-makefiles have been included. |
| ## $(1): target list |
| ########################################################### |
| |
| define module-stubs-files |
| $(foreach module,$(1),$(ALL_MODULES.$(module).STUBS)) |
| endef |
| |
| ########################################################### |
| ## Evaluates to the timestamp file for a doc module, which |
| ## is the dependency that should be used. |
| ## $(1): doc module |
| ########################################################### |
| |
| define doc-timestamp-for |
| $(OUT_DOCS)/$(strip $(1))-timestamp |
| endef |
| |
| |
| ########################################################### |
| ## Convert "core ext framework" to "out/.../javalib.jar ..." |
| ## $(1): library list |
| ## $(2): Non-empty if IS_HOST_MODULE |
| ########################################################### |
| |
| # $(1): library name |
| # $(2): Non-empty if IS_HOST_MODULE |
| define _java-lib-dir |
| $(call intermediates-dir-for, \ |
| JAVA_LIBRARIES,$(1),$(2),COMMON) |
| endef |
| |
| # $(1): library name |
| # $(2): Non-empty if IS_HOST_MODULE |
| define _java-lib-full-classes.jar |
| $(call _java-lib-dir,$(1),$(2))/classes$(COMMON_JAVA_PACKAGE_SUFFIX) |
| endef |
| |
| # $(1): library name list |
| # $(2): Non-empty if IS_HOST_MODULE |
| define java-lib-files |
| $(foreach lib,$(1),$(call _java-lib-full-classes.jar,$(lib),$(2))) |
| endef |
| |
| # $(1): library name |
| # $(2): Non-empty if IS_HOST_MODULE |
| define _java-lib-full-dep |
| $(call _java-lib-dir,$(1),$(2))/$(if $(2),javalib,classes)$(COMMON_JAVA_PACKAGE_SUFFIX) |
| endef |
| |
| # $(1): library name list |
| # $(2): Non-empty if IS_HOST_MODULE |
| define java-lib-deps |
| $(foreach lib,$(1),$(call _java-lib-full-dep,$(lib),$(2))) |
| endef |
| |
| ########################################################### |
| ## Run rot13 on a string |
| ## $(1): the string. Must be one line. |
| ########################################################### |
| define rot13 |
| $(shell echo $(1) | tr 'a-zA-Z' 'n-za-mN-ZA-M') |
| endef |
| |
| |
| ########################################################### |
| ## Returns true if $(1) and $(2) are equal. Returns |
| ## the empty string if they are not equal. |
| ########################################################### |
| define streq |
| $(strip $(if $(strip $(1)),\ |
| $(if $(strip $(2)),\ |
| $(if $(filter-out __,_$(subst $(strip $(1)),,$(strip $(2)))$(subst $(strip $(2)),,$(strip $(1)))_),,true), \ |
| ),\ |
| $(if $(strip $(2)),\ |
| ,\ |
| true)\ |
| )) |
| endef |
| |
| ########################################################### |
| ## Convert "a b c" into "a:b:c" |
| ########################################################### |
| define normalize-path-list |
| $(subst $(space),:,$(strip $(1))) |
| endef |
| |
| ########################################################### |
| ## Read the word out of a colon-separated list of words. |
| ## This has the same behavior as the built-in function |
| ## $(word n,str). |
| ## |
| ## The individual words may not contain spaces. |
| ## |
| ## $(1): 1 based index |
| ## $(2): value of the form a:b:c... |
| ########################################################### |
| |
| define word-colon |
| $(word $(1),$(subst :,$(space),$(2))) |
| endef |
| |
| ########################################################### |
| ## Convert "a=b c= d e = f" into "a=b c=d e=f" |
| ## |
| ## $(1): list to collapse |
| ## $(2): if set, separator word; usually "=", ":", or ":=" |
| ## Defaults to "=" if not set. |
| ########################################################### |
| |
| define collapse-pairs |
| $(eval _cpSEP := $(strip $(if $(2),$(2),=)))\ |
| $(subst $(space)$(_cpSEP)$(space),$(_cpSEP),$(strip \ |
| $(subst $(_cpSEP), $(_cpSEP) ,$(1)))) |
| endef |
| |
| ########################################################### |
| ## Given a list of pairs, if multiple pairs have the same |
| ## first components, keep only the first pair. |
| ## |
| ## $(1): list of pairs |
| ## $(2): the separator word, such as ":", "=", etc. |
| define uniq-pairs-by-first-component |
| $(eval _upbfc_fc_set :=)\ |
| $(strip $(foreach w,$(1), $(eval _first := $(word 1,$(subst $(2),$(space),$(w))))\ |
| $(if $(filter $(_upbfc_fc_set),$(_first)),,$(w)\ |
| $(eval _upbfc_fc_set += $(_first)))))\ |
| $(eval _upbfc_fc_set :=)\ |
| $(eval _first:=) |
| endef |
| |
| ########################################################### |
| ## MODULE_TAG set operations |
| ########################################################### |
| |
| # Given a list of tags, return the targets that specify |
| # any of those tags. |
| # $(1): tag list |
| define modules-for-tag-list |
| $(sort $(foreach tag,$(1),$(ALL_MODULE_TAGS.$(tag)))) |
| endef |
| |
| # Same as modules-for-tag-list, but operates on |
| # ALL_MODULE_NAME_TAGS. |
| # $(1): tag list |
| define module-names-for-tag-list |
| $(sort $(foreach tag,$(1),$(ALL_MODULE_NAME_TAGS.$(tag)))) |
| endef |
| |
| # Given an accept and reject list, find the matching |
| # set of targets. If a target has multiple tags and |
| # any of them are rejected, the target is rejected. |
| # Reject overrides accept. |
| # $(1): list of tags to accept |
| # $(2): list of tags to reject |
| #TODO(dbort): do $(if $(strip $(1)),$(1),$(ALL_MODULE_TAGS)) |
| #TODO(jbq): as of 20100106 nobody uses the second parameter |
| define get-tagged-modules |
| $(filter-out \ |
| $(call modules-for-tag-list,$(2)), \ |
| $(call modules-for-tag-list,$(1))) |
| endef |
| |
| ########################################################### |
| ## Append a leaf to a base path. Properly deals with |
| ## base paths ending in /. |
| ## |
| ## $(1): base path |
| ## $(2): leaf path |
| ########################################################### |
| |
| define append-path |
| $(subst //,/,$(1)/$(2)) |
| endef |
| |
| |
| ########################################################### |
| ## Package filtering |
| ########################################################### |
| |
| # Given a list of installed modules (short or long names) |
| # return a list of the packages (yes, .apk packages, not |
| # modules in general) that are overridden by this list and, |
| # therefore, should not be installed. |
| # $(1): mixed list of installed modules |
| # TODO: This is fragile; find a reliable way to get this information. |
| define _get-package-overrides |
| $(eval ### Discard any words containing slashes, unless they end in .apk, \ |
| ### in which case trim off the directory component and the suffix. \ |
| ### If there are no slashes, keep the entire word.) |
| $(eval _gpo_names := $(subst /,@@@ @@@,$(1))) |
| $(eval _gpo_names := \ |
| $(filter %.apk,$(_gpo_names)) \ |
| $(filter-out %@@@ @@@%,$(_gpo_names))) |
| $(eval _gpo_names := $(patsubst %.apk,%,$(_gpo_names))) |
| $(eval _gpo_names := $(patsubst @@@%,%,$(_gpo_names))) |
| |
| $(eval ### Remove any remaining words that contain dots.) |
| $(eval _gpo_names := $(subst .,@@@ @@@,$(_gpo_names))) |
| $(eval _gpo_names := $(filter-out %@@@ @@@%,$(_gpo_names))) |
| |
| $(eval ### Now we have a list of any words that could possibly refer to \ |
| ### packages, although there may be words that do not. Only \ |
| ### real packages will be present under PACKAGES.*, though.) |
| $(foreach _gpo_name,$(_gpo_names),$(PACKAGES.$(_gpo_name).OVERRIDES)) |
| endef |
| |
| define get-package-overrides |
| $(sort $(strip $(call _get-package-overrides,$(1)))) |
| endef |
| |
| ########################################################### |
| ## Output the command lines, or not |
| ########################################################### |
| |
| ifeq ($(strip $(SHOW_COMMANDS)),) |
| define pretty |
| @echo $1 |
| endef |
| hide := @ |
| else |
| define pretty |
| endef |
| hide := |
| endif |
| |
| ########################################################### |
| ## Dump the variables that are associated with targets |
| ########################################################### |
| |
| define dump-module-variables |
| @echo all_dependencies=$^ |
| @echo PRIVATE_YACCFLAGS=$(PRIVATE_YACCFLAGS); |
| @echo PRIVATE_CFLAGS=$(PRIVATE_CFLAGS); |
| @echo PRIVATE_CPPFLAGS=$(PRIVATE_CPPFLAGS); |
| @echo PRIVATE_DEBUG_CFLAGS=$(PRIVATE_DEBUG_CFLAGS); |
| @echo PRIVATE_C_INCLUDES=$(PRIVATE_C_INCLUDES); |
| @echo PRIVATE_LDFLAGS=$(PRIVATE_LDFLAGS); |
| @echo PRIVATE_LDLIBS=$(PRIVATE_LDLIBS); |
| @echo PRIVATE_ARFLAGS=$(PRIVATE_ARFLAGS); |
| @echo PRIVATE_AAPT_FLAGS=$(PRIVATE_AAPT_FLAGS); |
| @echo PRIVATE_DX_FLAGS=$(PRIVATE_DX_FLAGS); |
| @echo PRIVATE_JAVACFLAGS=$(PRIVATE_JAVACFLAGS); |
| @echo PRIVATE_JAVA_LIBRARIES=$(PRIVATE_JAVA_LIBRARIES); |
| @echo PRIVATE_ALL_SHARED_LIBRARIES=$(PRIVATE_ALL_SHARED_LIBRARIES); |
| @echo PRIVATE_ALL_STATIC_LIBRARIES=$(PRIVATE_ALL_STATIC_LIBRARIES); |
| @echo PRIVATE_ALL_WHOLE_STATIC_LIBRARIES=$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES); |
| @echo PRIVATE_ALL_OBJECTS=$(PRIVATE_ALL_OBJECTS); |
| @echo PRIVATE_NO_CRT=$(PRIVATE_NO_CRT); |
| endef |
| |
| ########################################################### |
| ## Commands for using sed to replace given variable values |
| ########################################################### |
| |
| define transform-variables |
| @mkdir -p $(dir $@) |
| @echo "Sed: $(if $(PRIVATE_MODULE),$(PRIVATE_MODULE),$@) <= $<" |
| $(hide) sed $(foreach var,$(REPLACE_VARS),-e "s/{{$(var)}}/$(subst /,\/,$(PWD)/$($(var)))/g") $< >$@ |
| $(hide) if [ "$(suffix $@)" = ".sh" ]; then chmod a+rx $@; fi |
| endef |
| |
| |
| ########################################################### |
| ## Commands for munging the dependency files GCC generates |
| ########################################################### |
| # $(1): the input .d file |
| # $(2): the output .P file |
| define transform-d-to-p-args |
| $(hide) cp $(1) $(2); \ |
| sed -e 's/#.*//' -e 's/^[^:]*: *//' -e 's/ *\\$$//' \ |
| -e '/^$$/ d' -e 's/$$/ :/' < $(1) >> $(2); \ |
| rm -f $(1) |
| endef |
| |
| define transform-d-to-p |
| $(call transform-d-to-p-args,$(@:%.o=%.d),$(@:%.o=%.P)) |
| endef |
| |
| ########################################################### |
| ## Commands for running lex |
| ########################################################### |
| |
| define transform-l-to-cpp |
| @mkdir -p $(dir $@) |
| @echo "Lex: $(PRIVATE_MODULE) <= $<" |
| $(hide) $(LEX) -o$@ $< |
| endef |
| |
| ########################################################### |
| ## Commands for running yacc |
| ## |
| ## Because the extension of c++ files can change, the |
| ## extension must be specified in $1. |
| ## E.g, "$(call transform-y-to-cpp,.cpp)" |
| ########################################################### |
| |
| define transform-y-to-cpp |
| @mkdir -p $(dir $@) |
| @echo "Yacc: $(PRIVATE_MODULE) <= $<" |
| $(YACC) $(PRIVATE_YACCFLAGS) -o $@ $< |
| touch $(@:$1=$(YACC_HEADER_SUFFIX)) |
| echo '#ifndef '$(@F:$1=_h) > $(@:$1=.h) |
| echo '#define '$(@F:$1=_h) >> $(@:$1=.h) |
| cat $(@:$1=$(YACC_HEADER_SUFFIX)) >> $(@:$1=.h) |
| echo '#endif' >> $(@:$1=.h) |
| rm -f $(@:$1=$(YACC_HEADER_SUFFIX)) |
| endef |
| |
| ########################################################### |
| ## Commands to compile RenderScript to Java |
| ########################################################### |
| |
| define transform-renderscripts-to-java-and-bc |
| @echo "RenderScript: $(PRIVATE_MODULE) <= $(PRIVATE_RS_SOURCE_FILES)" |
| $(hide) rm -rf $(PRIVATE_RS_OUTPUT_DIR) |
| $(hide) mkdir -p $(PRIVATE_RS_OUTPUT_DIR)/res/raw |
| $(hide) mkdir -p $(PRIVATE_RS_OUTPUT_DIR)/src |
| $(hide) $(PRIVATE_RS_CC) \ |
| -o $(PRIVATE_RS_OUTPUT_DIR)/res/raw \ |
| -p $(PRIVATE_RS_OUTPUT_DIR)/src \ |
| -d $(PRIVATE_RS_OUTPUT_DIR) \ |
| -a $@ -MD \ |
| $(addprefix -target-api , $(PRIVATE_RS_TARGET_API)) \ |
| $(PRIVATE_RS_FLAGS) \ |
| $(foreach inc,$(PRIVATE_RS_INCLUDES),$(addprefix -I , $(inc))) \ |
| $(PRIVATE_RS_SOURCE_FILES) |
| $(hide) mkdir -p $(dir $@) |
| $(hide) touch $@ |
| endef |
| |
| define transform-bc-to-so |
| @echo "Renderscript compatibility: $(notdir $@) <= $(notdir $<)" |
| $(hide) mkdir -p $(dir $@) |
| $(hide) $(BCC_COMPAT) -O3 -o $(dir $@)/$(notdir $(<:.bc=.o)) -fPIC -shared \ |
| -rt-path $(RS_PREBUILT_CLCORE) -mtriple $(RS_TRIPLE) $< |
| $(hide) $(PRIVATE_CXX) -shared -Wl,-soname,$(notdir $@) -nostdlib \ |
| -Wl,-rpath,\$$ORIGIN/../lib \ |
| $(dir $@)/$(notdir $(<:.bc=.o)) \ |
| $(RS_PREBUILT_COMPILER_RT) \ |
| -o $@ -L prebuilts/gcc/ \ |
| -L $(TARGET_OUT_INTERMEDIATE_LIBRARIES) $(RS_PREBUILT_LIBPATH) \ |
| -lRSSupport -lm -lc |
| endef |
| |
| ########################################################### |
| ## Commands to compile RenderScript to C++ |
| ########################################################### |
| |
| define transform-renderscripts-to-cpp-and-bc |
| @echo "RenderScript: $(PRIVATE_MODULE) <= $(PRIVATE_RS_SOURCE_FILES)" |
| $(hide) rm -rf $(PRIVATE_RS_OUTPUT_DIR) |
| $(hide) mkdir -p $(PRIVATE_RS_OUTPUT_DIR)/ |
| $(hide) $(PRIVATE_RS_CC) \ |
| -o $(PRIVATE_RS_OUTPUT_DIR)/ \ |
| -d $(PRIVATE_RS_OUTPUT_DIR) \ |
| -a $@ -MD \ |
| -reflect-c++ \ |
| $(PRIVATE_RS_FLAGS) \ |
| $(foreach inc,$(PRIVATE_RS_INCLUDES),$(addprefix -I , $(inc))) \ |
| $(PRIVATE_RS_SOURCE_FILES) |
| $(hide) mkdir -p $(dir $@) |
| $(hide) touch $@ |
| endef |
| |
| |
| ########################################################### |
| ## Commands for running aidl |
| ########################################################### |
| |
| define transform-aidl-to-java |
| @mkdir -p $(dir $@) |
| @echo "Aidl: $(PRIVATE_MODULE) <= $<" |
| $(hide) $(AIDL) -d$(patsubst %.java,%.P,$@) $(PRIVATE_AIDL_FLAGS) $< $@ |
| endef |
| #$(AIDL) $(PRIVATE_AIDL_FLAGS) $< - | indent -nut -br -npcs -l1000 > $@ |
| |
| |
| ########################################################### |
| ## Commands for running java-event-log-tags.py |
| ########################################################### |
| |
| define transform-logtags-to-java |
| @mkdir -p $(dir $@) |
| @echo "logtags: $@ <= $<" |
| $(hide) $(JAVATAGS) -o $@ $^ |
| endef |
| |
| |
| ########################################################### |
| ## Commands for running protoc to compile .proto into .java |
| ########################################################### |
| |
| define transform-proto-to-java |
| @mkdir -p $(dir $@) |
| @echo "Protoc: $@ <= $(PRIVATE_PROTO_SRC_FILES)" |
| @rm -rf $(PRIVATE_PROTO_JAVA_OUTPUT_DIR) |
| @mkdir -p $(PRIVATE_PROTO_JAVA_OUTPUT_DIR) |
| $(hide) for f in $(PRIVATE_PROTO_SRC_FILES); do \ |
| $(PROTOC) \ |
| $(addprefix --proto_path=, $(PRIVATE_PROTO_INCLUDES)) \ |
| $(PRIVATE_PROTO_JAVA_OUTPUT_OPTION)="$(PRIVATE_PROTO_JAVA_OUTPUT_PARAMS):$(PRIVATE_PROTO_JAVA_OUTPUT_DIR)" \ |
| $(PRIVATE_PROTOC_FLAGS) \ |
| $$f || exit 33; \ |
| done |
| $(hide) touch $@ |
| endef |
| |
| ###################################################################### |
| ## Commands for running protoc to compile .proto into .pb.cc and .pb.h |
| ###################################################################### |
| define transform-proto-to-cc |
| @mkdir -p $(dir $@) |
| @echo "Protoc: $@ <= $<" |
| $(hide) $(PROTOC) \ |
| $(addprefix --proto_path=, $(PRIVATE_PROTO_INCLUDES)) \ |
| $(PRIVATE_PROTOC_FLAGS) \ |
| --cpp_out=$(PRIVATE_PROTO_CC_OUTPUT_DIR) $< |
| endef |
| |
| |
| ########################################################### |
| ## Commands for running gcc to compile a C++ file |
| ########################################################### |
| |
| define transform-cpp-to-o |
| @mkdir -p $(dir $@) |
| @echo "target $(PRIVATE_ARM_MODE) C++: $(PRIVATE_MODULE) <= $<" |
| $(hide) $(PRIVATE_CXX) \ |
| $(addprefix -I , $(PRIVATE_C_INCLUDES)) \ |
| $(shell cat $(PRIVATE_IMPORT_INCLUDES)) \ |
| $(addprefix -isystem ,\ |
| $(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \ |
| $(filter-out $(PRIVATE_C_INCLUDES), \ |
| $(PRIVATE_TARGET_PROJECT_INCLUDES) \ |
| $(PRIVATE_TARGET_C_INCLUDES)))) \ |
| -c \ |
| $(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \ |
| $(PRIVATE_TARGET_GLOBAL_CFLAGS) \ |
| $(PRIVATE_TARGET_GLOBAL_CPPFLAGS) \ |
| $(PRIVATE_ARM_CFLAGS) \ |
| ) \ |
| $(PRIVATE_RTTI_FLAG) \ |
| $(PRIVATE_CFLAGS) \ |
| $(PRIVATE_CPPFLAGS) \ |
| $(PRIVATE_DEBUG_CFLAGS) \ |
| -MD -MF $(patsubst %.o,%.d,$@) -o $@ $< |
| $(transform-d-to-p) |
| endef |
| |
| |
| ########################################################### |
| ## Commands for running gcc to compile a C file |
| ########################################################### |
| |
| # $(1): extra flags |
| define transform-c-or-s-to-o-no-deps |
| @mkdir -p $(dir $@) |
| $(hide) $(PRIVATE_CC) \ |
| $(addprefix -I , $(PRIVATE_C_INCLUDES)) \ |
| $(shell cat $(PRIVATE_IMPORT_INCLUDES)) \ |
| $(addprefix -isystem ,\ |
| $(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \ |
| $(filter-out $(PRIVATE_C_INCLUDES), \ |
| $(PRIVATE_TARGET_PROJECT_INCLUDES) \ |
| $(PRIVATE_TARGET_C_INCLUDES)))) \ |
| -c \ |
| $(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \ |
| $(PRIVATE_TARGET_GLOBAL_CFLAGS) \ |
| $(PRIVATE_ARM_CFLAGS) \ |
| ) \ |
| $(1) \ |
| -MD -MF $(patsubst %.o,%.d,$@) -o $@ $< |
| endef |
| |
| define transform-c-to-o-no-deps |
| @echo "target $(PRIVATE_ARM_MODE) C: $(PRIVATE_MODULE) <= $<" |
| $(call transform-c-or-s-to-o-no-deps, $(PRIVATE_CFLAGS) $(PRIVATE_CONLYFLAGS) $(PRIVATE_DEBUG_CFLAGS)) |
| endef |
| |
| define transform-s-to-o-no-deps |
| @echo "target asm: $(PRIVATE_MODULE) <= $<" |
| $(call transform-c-or-s-to-o-no-deps, $(PRIVATE_ASFLAGS)) |
| endef |
| |
| define transform-c-to-o |
| $(transform-c-to-o-no-deps) |
| $(transform-d-to-p) |
| endef |
| |
| define transform-s-to-o |
| $(transform-s-to-o-no-deps) |
| $(transform-d-to-p) |
| endef |
| |
| ########################################################### |
| ## Commands for running gcc to compile an Objective-C file |
| ## This should never happen for target builds but this |
| ## will error at build time. |
| ########################################################### |
| |
| define transform-m-to-o-no-deps |
| @echo "target ObjC: $(PRIVATE_MODULE) <= $<" |
| $(call transform-c-or-s-to-o-no-deps, $(PRIVATE_CFLAGS) $(PRIVATE_DEBUG_CFLAGS)) |
| endef |
| |
| define transform-m-to-o |
| $(transform-m-to-o-no-deps) |
| $(transform-d-to-p) |
| endef |
| |
| ########################################################### |
| ## Commands for running gcc to compile a host C++ file |
| ########################################################### |
| |
| define transform-host-cpp-to-o |
| @mkdir -p $(dir $@) |
| @echo "host C++: $(PRIVATE_MODULE) <= $<" |
| $(hide) $(PRIVATE_CXX) \ |
| $(addprefix -I , $(PRIVATE_C_INCLUDES)) \ |
| $(shell cat $(PRIVATE_IMPORT_INCLUDES)) \ |
| $(addprefix -isystem ,\ |
| $(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \ |
| $(filter-out $(PRIVATE_C_INCLUDES), \ |
| $(HOST_PROJECT_INCLUDES) \ |
| $(PRIVATE_HOST_C_INCLUDES)))) \ |
| -c \ |
| $(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \ |
| $(PRIVATE_HOST_GLOBAL_CFLAGS) \ |
| $(PRIVATE_HOST_GLOBAL_CPPFLAGS) \ |
| ) \ |
| $(PRIVATE_CFLAGS) \ |
| $(PRIVATE_CPPFLAGS) \ |
| $(PRIVATE_DEBUG_CFLAGS) \ |
| -MD -MF $(patsubst %.o,%.d,$@) -o $@ $< |
| $(transform-d-to-p) |
| endef |
| |
| |
| ########################################################### |
| ## Commands for running gcc to compile a host C file |
| ########################################################### |
| |
| # $(1): extra flags |
| define transform-host-c-or-s-to-o-no-deps |
| @mkdir -p $(dir $@) |
| $(hide) $(PRIVATE_CC) \ |
| $(addprefix -I , $(PRIVATE_C_INCLUDES)) \ |
| $(shell cat $(PRIVATE_IMPORT_INCLUDES)) \ |
| $(addprefix -isystem ,\ |
| $(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \ |
| $(filter-out $(PRIVATE_C_INCLUDES), \ |
| $(HOST_PROJECT_INCLUDES) \ |
| $(PRIVATE_HOST_C_INCLUDES)))) \ |
| -c \ |
| $(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \ |
| $(PRIVATE_HOST_GLOBAL_CFLAGS) \ |
| ) \ |
| $(1) \ |
| -MD -MF $(patsubst %.o,%.d,$@) -o $@ $< |
| endef |
| |
| define transform-host-c-to-o-no-deps |
| @echo "host C: $(PRIVATE_MODULE) <= $<" |
| $(call transform-host-c-or-s-to-o-no-deps, $(PRIVATE_CFLAGS) $(PRIVATE_CONLYFLAGS) $(PRIVATE_DEBUG_CFLAGS)) |
| endef |
| |
| define transform-host-s-to-o-no-deps |
| @echo "host asm: $(PRIVATE_MODULE) <= $<" |
| $(call transform-host-c-or-s-to-o-no-deps, $(PRIVATE_ASFLAGS)) |
| endef |
| |
| define transform-host-c-to-o |
| $(transform-host-c-to-o-no-deps) |
| $(transform-d-to-p) |
| endef |
| |
| define transform-host-s-to-o |
| $(transform-host-s-to-o-no-deps) |
| $(transform-d-to-p) |
| endef |
| |
| ########################################################### |
| ## Commands for running gcc to compile a host Objective-C file |
| ########################################################### |
| |
| define transform-host-m-to-o-no-deps |
| @echo "host ObjC: $(PRIVATE_MODULE) <= $<" |
| $(call transform-host-c-or-s-to-o-no-deps, $(PRIVATE_CFLAGS) $(PRIVATE_DEBUG_CFLAGS)) |
| endef |
| |
| define transform-host-m-to-o |
| $(transform-host-m-to-o-no-deps) |
| $(transform-d-to-p) |
| endef |
| |
| ########################################################### |
| ## Commands for running ar |
| ########################################################### |
| |
| define _concat-if-arg2-not-empty |
| $(if $(2),$(hide) $(1) $(2)) |
| endef |
| |
| # Split long argument list into smaller groups and call the command repeatedly |
| # Call the command at least once even if there are no arguments, as otherwise |
| # the output file won't be created. |
| # |
| # $(1): the command without arguments |
| # $(2): the arguments |
| define split-long-arguments |
| $(hide) $(1) $(wordlist 1,500,$(2)) |
| $(call _concat-if-arg2-not-empty,$(1),$(wordlist 501,1000,$(2))) |
| $(call _concat-if-arg2-not-empty,$(1),$(wordlist 1001,1500,$(2))) |
| $(call _concat-if-arg2-not-empty,$(1),$(wordlist 1501,2000,$(2))) |
| $(call _concat-if-arg2-not-empty,$(1),$(wordlist 2001,2500,$(2))) |
| $(call _concat-if-arg2-not-empty,$(1),$(wordlist 2501,3000,$(2))) |
| $(call _concat-if-arg2-not-empty,$(1),$(wordlist 3001,99999,$(2))) |
| endef |
| |
| # $(1): the full path of the source static library. |
| define _extract-and-include-single-target-whole-static-lib |
| @echo "preparing StaticLib: $(PRIVATE_MODULE) [including $(1)]" |
| $(hide) ldir=$(PRIVATE_INTERMEDIATES_DIR)/WHOLE/$(basename $(notdir $(1)))_objs;\ |
| rm -rf $$ldir; \ |
| mkdir -p $$ldir; \ |
| filelist=; \ |
| for f in `$(TARGET_AR) t $(1)`; do \ |
| $($(PRIVATE_2ND_ARCH_VAR_PREFIX)TARGET_AR) p $(1) $$f > $$ldir/$$f; \ |
| filelist="$$filelist $$ldir/$$f"; \ |
| done ; \ |
| $($(PRIVATE_2ND_ARCH_VAR_PREFIX)TARGET_AR) $($(PRIVATE_2ND_ARCH_VAR_PREFIX)TARGET_GLOBAL_ARFLAGS) \ |
| $(PRIVATE_ARFLAGS) $@ $$filelist |
| |
| endef |
| |
| define extract-and-include-target-whole-static-libs |
| $(foreach lib,$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES), \ |
| $(call _extract-and-include-single-target-whole-static-lib, $(lib))) |
| endef |
| |
| # Explicitly delete the archive first so that ar doesn't |
| # try to add to an existing archive. |
| define transform-o-to-static-lib |
| @mkdir -p $(dir $@) |
| @rm -f $@ |
| $(extract-and-include-target-whole-static-libs) |
| @echo "target StaticLib: $(PRIVATE_MODULE) ($@)" |
| $(call split-long-arguments,$($(PRIVATE_2ND_ARCH_VAR_PREFIX)TARGET_AR) $($(PRIVATE_2ND_ARCH_VAR_PREFIX)TARGET_GLOBAL_ARFLAGS) \ |
| $(PRIVATE_ARFLAGS) $@,$(filter %.o, $^)) |
| endef |
| |
| ########################################################### |
| ## Commands for running host ar |
| ########################################################### |
| |
| # $(1): the full path of the source static library. |
| define _extract-and-include-single-host-whole-static-lib |
| @echo "preparing StaticLib: $(PRIVATE_MODULE) [including $(1)]" |
| $(hide) ldir=$(PRIVATE_INTERMEDIATES_DIR)/WHOLE/$(basename $(notdir $(1)))_objs;\ |
| rm -rf $$ldir; \ |
| mkdir -p $$ldir; \ |
| filelist=; \ |
| for f in `$(HOST_AR) t $(1) | \grep '\.o$$'`; do \ |
| $(HOST_AR) p $(1) $$f > $$ldir/$$f; \ |
| filelist="$$filelist $$ldir/$$f"; \ |
| done ; \ |
| $(HOST_AR) $(HOST_GLOBAL_ARFLAGS) $(PRIVATE_ARFLAGS) $@ $$filelist |
| |
| endef |
| |
| define extract-and-include-host-whole-static-libs |
| $(foreach lib,$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES), \ |
| $(call _extract-and-include-single-host-whole-static-lib, $(lib))) |
| endef |
| |
| # Explicitly delete the archive first so that ar doesn't |
| # try to add to an existing archive. |
| define transform-host-o-to-static-lib |
| @mkdir -p $(dir $@) |
| @rm -f $@ |
| $(extract-and-include-host-whole-static-libs) |
| @echo "host StaticLib: $(PRIVATE_MODULE) ($@)" |
| $(call split-long-arguments,$(HOST_AR) $(HOST_GLOBAL_ARFLAGS) $(PRIVATE_ARFLAGS) $@,$(filter %.o, $^)) |
| endef |
| |
| |
| ########################################################### |
| ## Commands for running gcc to link a shared library or package |
| ########################################################### |
| |
| # ld just seems to be so finicky with command order that we allow |
| # it to be overriden en-masse see combo/linux-arm.make for an example. |
| ifneq ($(HOST_CUSTOM_LD_COMMAND),true) |
| define transform-host-o-to-shared-lib-inner |
| $(hide) $(PRIVATE_CXX) \ |
| -Wl,-rpath-link=$(HOST_OUT_INTERMEDIATE_LIBRARIES) \ |
| -Wl,-rpath,\$$ORIGIN/../lib \ |
| -shared -Wl,-soname,$(notdir $@) \ |
| $(PRIVATE_LDFLAGS) \ |
| $(HOST_GLOBAL_LD_DIRS) \ |
| $(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \ |
| $(PRIVATE_HOST_GLOBAL_LDFLAGS) \ |
| ) \ |
| $(PRIVATE_ALL_OBJECTS) \ |
| -Wl,--whole-archive \ |
| $(call normalize-host-libraries,$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES)) \ |
| -Wl,--no-whole-archive \ |
| $(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--start-group) \ |
| $(call normalize-host-libraries,$(PRIVATE_ALL_STATIC_LIBRARIES)) \ |
| $(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--end-group) \ |
| $(call normalize-host-libraries,$(PRIVATE_ALL_SHARED_LIBRARIES)) \ |
| -o $@ \ |
| $(PRIVATE_LDLIBS) |
| endef |
| endif |
| |
| define transform-host-o-to-shared-lib |
| @mkdir -p $(dir $@) |
| @echo "host SharedLib: $(PRIVATE_MODULE) ($@)" |
| $(transform-host-o-to-shared-lib-inner) |
| endef |
| |
| define transform-host-o-to-package |
| @mkdir -p $(dir $@) |
| @echo "host Package: $(PRIVATE_MODULE) ($@)" |
| $(transform-host-o-to-shared-lib-inner) |
| endef |
| |
| |
| ########################################################### |
| ## Commands for running gcc to link a shared library or package |
| ########################################################### |
| |
| #echo >$@.vers "{"; \ |
| #echo >>$@.vers " global:"; \ |
| #$(BUILD_SYSTEM)/filter_symbols.sh $(TARGET_NM) " " ";" $(filter %.o,$^) | sort -u >>$@.vers; \ |
| #echo >>$@.vers " local:"; \ |
| #echo >>$@.vers " *;"; \ |
| #echo >>$@.vers "};"; \ |
| |
| # -Wl,--version-script=$@.vers \ |
| |
| # ld just seems to be so finicky with command order that we allow |
| # it to be overriden en-masse see combo/linux-arm.make for an example. |
| ifneq ($(TARGET_CUSTOM_LD_COMMAND),true) |
| define transform-o-to-shared-lib-inner |
| $(hide) $(PRIVATE_CXX) \ |
| $(PRIVATE_TARGET_GLOBAL_LDFLAGS) \ |
| -Wl,-rpath-link=$(TARGET_OUT_INTERMEDIATE_LIBRARIES) \ |
| -Wl,-rpath,\$$ORIGIN/../lib \ |
| -shared -Wl,-soname,$(notdir $@) \ |
| $(PRIVATE_LDFLAGS) \ |
| $(PRIVATE_TARGET_GLOBAL_LD_DIRS) \ |
| $(PRIVATE_ALL_OBJECTS) \ |
| -Wl,--whole-archive \ |
| $(call normalize-target-libraries,$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES)) \ |
| -Wl,--no-whole-archive \ |
| $(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--start-group) \ |
| $(call normalize-target-libraries,$(PRIVATE_ALL_STATIC_LIBRARIES)) \ |
| $(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--end-group) \ |
| $(call normalize-target-libraries,$(PRIVATE_ALL_SHARED_LIBRARIES)) \ |
| -o $@ \ |
| $(PRIVATE_LDLIBS) |
| endef |
| endif |
| |
| define transform-o-to-shared-lib |
| @mkdir -p $(dir $@) |
| @echo "target SharedLib: $(PRIVATE_MODULE) ($@)" |
| $($(PRIVATE_2ND_ARCH_VAR_PREFIX)transform-o-to-shared-lib-inner) |
| endef |
| |
| |
| ########################################################### |
| ## Commands for filtering a target executable or library |
| ########################################################### |
| |
| define transform-to-stripped |
| @mkdir -p $(dir $@) |
| @echo "target Strip: $(PRIVATE_MODULE) ($@)" |
| $(hide) $($(PRIVATE_2ND_ARCH_VAR_PREFIX)TARGET_STRIP_COMMAND) |
| endef |
| |
| |
| ########################################################### |
| ## Commands for running gcc to link an executable |
| ########################################################### |
| |
| ifneq ($(TARGET_CUSTOM_LD_COMMAND),true) |
| define transform-o-to-executable-inner |
| $(hide) $(PRIVATE_CXX) \ |
| $(PRIVATE_TARGET_GLOBAL_LDFLAGS) \ |
| $(PRIVATE_TARGET_GLOBAL_LD_DIRS) \ |
| -Wl,-rpath-link=$(TARGET_OUT_INTERMEDIATE_LIBRARIES) \ |
| -Wl,-rpath,\$$ORIGIN/../lib \ |
| $(PRIVATE_LDFLAGS) \ |
| $(PRIVATE_ALL_OBJECTS) \ |
| -Wl,--whole-archive \ |
| $(call normalize-target-libraries,$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES)) \ |
| -Wl,--no-whole-archive \ |
| $(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--start-group) \ |
| $(call normalize-target-libraries,$(PRIVATE_ALL_STATIC_LIBRARIES)) \ |
| $(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--end-group) \ |
| $(call normalize-target-libraries,$(PRIVATE_ALL_SHARED_LIBRARIES)) \ |
| -o $@ \ |
| $(PRIVATE_LDLIBS) |
| endef |
| endif |
| |
| define transform-o-to-executable |
| @mkdir -p $(dir $@) |
| @echo "target Executable: $(PRIVATE_MODULE) ($@)" |
| $($(PRIVATE_2ND_ARCH_VAR_PREFIX)transform-o-to-executable-inner) |
| endef |
| |
| |
| ########################################################### |
| ## Commands for running gcc to link a statically linked |
| ## executable. In practice, we only use this on arm, so |
| ## the other platforms don't have the |
| ## transform-o-to-static-executable defined |
| ########################################################### |
| |
| ifneq ($(TARGET_CUSTOM_LD_COMMAND),true) |
| define transform-o-to-static-executable-inner |
| endef |
| endif |
| |
| define transform-o-to-static-executable |
| @mkdir -p $(dir $@) |
| @echo "target StaticExecutable: $(PRIVATE_MODULE) ($@)" |
| $($(PRIVATE_2ND_ARCH_VAR_PREFIX)transform-o-to-static-executable-inner) |
| endef |
| |
| |
| ########################################################### |
| ## Commands for running gcc to link a host executable |
| ########################################################### |
| |
| ifneq ($(HOST_CUSTOM_LD_COMMAND),true) |
| define transform-host-o-to-executable-inner |
| $(hide) $(PRIVATE_CXX) \ |
| $(PRIVATE_ALL_OBJECTS) \ |
| -Wl,--whole-archive \ |
| $(call normalize-host-libraries,$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES)) \ |
| -Wl,--no-whole-archive \ |
| $(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--start-group) \ |
| $(call normalize-host-libraries,$(PRIVATE_ALL_STATIC_LIBRARIES)) \ |
| $(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--end-group) \ |
| $(call normalize-host-libraries,$(PRIVATE_ALL_SHARED_LIBRARIES)) \ |
| -Wl,-rpath-link=$(HOST_OUT_INTERMEDIATE_LIBRARIES) \ |
| -Wl,-rpath,\$$ORIGIN/../lib \ |
| $(HOST_GLOBAL_LD_DIRS) \ |
| $(PRIVATE_LDFLAGS) \ |
| $(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \ |
| $(PRIVATE_HOST_GLOBAL_LDFLAGS) \ |
| -fPIE -pie \ |
| ) \ |
| -o $@ \ |
| $(PRIVATE_LDLIBS) |
| endef |
| endif |
| |
| define transform-host-o-to-executable |
| @mkdir -p $(dir $@) |
| @echo "host Executable: $(PRIVATE_MODULE) ($@)" |
| $(transform-host-o-to-executable-inner) |
| endef |
| |
| |
| ########################################################### |
| ## Commands for running javac to make .class files |
| ########################################################### |
| |
| #@echo "Source intermediates dir: $(PRIVATE_SOURCE_INTERMEDIATES_DIR)" |
| #@echo "Source intermediates: $$(find $(PRIVATE_SOURCE_INTERMEDIATES_DIR) -name '*.java')" |
| |
| # TODO: Right now we generate the asset resources twice, first as part |
| # of generating the Java classes, then at the end when packaging the final |
| # assets. This should be changed to do one of two things: (1) Don't generate |
| # any resource files the first time, only create classes during that stage; |
| # or (2) Don't use the -c flag with the second stage, instead taking the |
| # resource files from the first stage as additional input. My original intent |
| # was to use approach (2), but this requires a little more work in the tool. |
| # Maybe we should just use approach (1). |
| |
| # This rule creates the R.java and Manifest.java files, both of which |
| # are PRODUCT-neutral. Don't pass PRIVATE_PRODUCT_AAPT_CONFIG to this invocation. |
| define create-resource-java-files |
| @mkdir -p $(PRIVATE_SOURCE_INTERMEDIATES_DIR) |
| @mkdir -p $(dir $(PRIVATE_RESOURCE_PUBLICS_OUTPUT)) |
| $(hide) $(AAPT) package $(PRIVATE_AAPT_FLAGS) -m \ |
| $(eval # PRIVATE_PRODUCT_AAPT_CONFIG is intentionally missing-- see comment.) \ |
| $(addprefix -J , $(PRIVATE_SOURCE_INTERMEDIATES_DIR)) \ |
| $(addprefix -M , $(PRIVATE_ANDROID_MANIFEST)) \ |
| $(addprefix -P , $(PRIVATE_RESOURCE_PUBLICS_OUTPUT)) \ |
| $(addprefix -S , $(PRIVATE_RESOURCE_DIR)) \ |
| $(addprefix -A , $(PRIVATE_ASSET_DIR)) \ |
| $(addprefix -I , $(PRIVATE_AAPT_INCLUDES)) \ |
| $(addprefix -G , $(PRIVATE_PROGUARD_OPTIONS_FILE)) \ |
| $(addprefix --min-sdk-version , $(PRIVATE_DEFAULT_APP_TARGET_SDK)) \ |
| $(addprefix --target-sdk-version , $(PRIVATE_DEFAULT_APP_TARGET_SDK)) \ |
| $(if $(filter --version-code,$(PRIVATE_AAPT_FLAGS)),,$(addprefix --version-code , $(PLATFORM_SDK_VERSION))) \ |
| $(if $(filter --version-name,$(PRIVATE_AAPT_FLAGS)),,$(addprefix --version-name , $(PLATFORM_VERSION)-$(BUILD_NUMBER))) \ |
| $(addprefix --rename-manifest-package , $(PRIVATE_MANIFEST_PACKAGE_NAME)) \ |
| $(addprefix --rename-instrumentation-target-package , $(PRIVATE_MANIFEST_INSTRUMENTATION_FOR)) |
| endef |
| |
| ifeq ($(HOST_OS),windows) |
| xlint_unchecked := |
| else |
| xlint_unchecked := -Xlint:unchecked |
| endif |
| |
| ifeq (true, $(ENABLE_INCREMENTALJAVAC)) |
| incremental_dex := --incremental |
| else |
| incremental_dex := |
| endif |
| |
| # emit-line, <word list>, <output file> |
| define emit-line |
| $(if $(1),echo -n '$(strip $(1)) ' >> $(2)) |
| endef |
| |
| # dump-words-to-file, <word list>, <output file> |
| define dump-words-to-file |
| @rm -f $(2) |
| @$(call emit-line,$(wordlist 1,200,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 201,400,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 401,600,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 601,800,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 801,1000,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 1001,1200,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 1201,1400,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 1401,1600,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 1601,1800,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 1801,2000,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 2001,2200,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 2201,2400,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 2401,2600,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 2601,2800,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 2801,3000,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 3001,3200,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 3201,3400,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 3401,3600,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 3601,3800,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 3801,4000,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 4001,4200,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 4201,4400,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 4401,4600,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 4601,4800,$(1)),$(2)) |
| @$(call emit-line,$(wordlist 4801,5000,$(1)),$(2)) |
| @$(if $(wordlist 5001,5002,$(1)),$(error Too many words ($(words $(1))))) |
| endef |
| |
| # For a list of jar files, unzip them to a specified directory, |
| # but make sure that no META-INF files come along for the ride. |
| # |
| # $(1): files to unzip |
| # $(2): destination directory |
| define unzip-jar-files |
| $(hide) for f in $(1); \ |
| do \ |
| if [ ! -f $$f ]; then \ |
| echo Missing file $$f; \ |
| exit 1; \ |
| fi; \ |
| unzip -qo $$f -d $(2); \ |
| done \ |
| $(if $(PRIVATE_DONT_DELETE_JAR_META_INF),,;rm -rf $(2)/META-INF) |
| endef |
| |
| # Common definition to invoke javac on the host and target. |
| # |
| # Some historical notes: |
| # - below we write the list of java files to java-source-list to avoid argument |
| # list length problems with Cygwin |
| # - we filter out duplicate java file names because eclipse's compiler |
| # doesn't like them. |
| # |
| # $(1): javac |
| # $(2): bootclasspath |
| define compile-java |
| $(hide) rm -f $@ |
| $(hide) rm -rf $(PRIVATE_CLASS_INTERMEDIATES_DIR) |
| $(hide) mkdir -p $(dir $@) |
| $(hide) mkdir -p $(PRIVATE_CLASS_INTERMEDIATES_DIR) |
| $(call unzip-jar-files,$(PRIVATE_STATIC_JAVA_LIBRARIES),$(PRIVATE_CLASS_INTERMEDIATES_DIR)) |
| $(call dump-words-to-file,$(PRIVATE_JAVA_SOURCES),$(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list) |
| $(hide) if [ -d "$(PRIVATE_SOURCE_INTERMEDIATES_DIR)" ]; then \ |
| find $(PRIVATE_SOURCE_INTERMEDIATES_DIR) -name '*.java' >> $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list; \ |
| fi |
| $(hide) tr ' ' '\n' < $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list \ |
| | sort -u > $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list-uniq |
| $(hide) if [ -s $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list-uniq ] ; then \ |
| $(1) -encoding UTF-8 \ |
| $(strip $(PRIVATE_JAVAC_DEBUG_FLAGS)) \ |
| $(if $(findstring true,$(PRIVATE_WARNINGS_ENABLE)),$(xlint_unchecked),) \ |
| $(2) \ |
| $(addprefix -classpath ,$(strip \ |
| $(call normalize-path-list,$(PRIVATE_ALL_JAVA_LIBRARIES)))) \ |
| $(if $(findstring true,$(PRIVATE_WARNINGS_ENABLE)),$(xlint_unchecked),) \ |
| -extdirs "" -d $(PRIVATE_CLASS_INTERMEDIATES_DIR) \ |
| $(PRIVATE_JAVACFLAGS) \ |
| \@$(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list-uniq \ |
| || ( rm -rf $(PRIVATE_CLASS_INTERMEDIATES_DIR) ; exit 41 ) \ |
| fi |
| $(if $(PRIVATE_JAVA_LAYERS_FILE), $(hide) build/tools/java-layers.py \ |
| $(PRIVATE_JAVA_LAYERS_FILE) \@$(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list-uniq,) |
| $(hide) rm -f $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list |
| $(hide) rm -f $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list-uniq |
| $(if $(PRIVATE_JAR_EXCLUDE_FILES), $(hide) find $(PRIVATE_CLASS_INTERMEDIATES_DIR) \ |
| -name $(word 1, $(PRIVATE_JAR_EXCLUDE_FILES)) \ |
| $(addprefix -o -name , $(wordlist 2, 999, $(PRIVATE_JAR_EXCLUDE_FILES))) \ |
| | xargs rm -rf) |
| $(if $(PRIVATE_JAR_PACKAGES), $(hide) find $(PRIVATE_CLASS_INTERMEDIATES_DIR) -mindepth 1 -type d \ |
| $(foreach pkg, $(PRIVATE_JAR_PACKAGES), \ |
| -not -path $(PRIVATE_CLASS_INTERMEDIATES_DIR)/$(subst .,/,$(pkg))) \ |
| | xargs rm -rf) |
| $(hide) jar $(if $(strip $(PRIVATE_JAR_MANIFEST)),-cfm,-cf) \ |
| $@ $(PRIVATE_JAR_MANIFEST) -C $(PRIVATE_CLASS_INTERMEDIATES_DIR) . |
| endef |
| |
| define transform-java-to-classes.jar |
| @echo "target Java: $(PRIVATE_MODULE) ($(PRIVATE_CLASS_INTERMEDIATES_DIR))" |
| $(call compile-java,$(TARGET_JAVAC),$(PRIVATE_BOOTCLASSPATH)) |
| endef |
| |
| # Override the above definitions if we want to do incremetal javac |
| ifeq (true, $(ENABLE_INCREMENTALJAVAC)) |
| define compile-java |
| $(hide) mkdir -p $(dir $@) |
| $(hide) mkdir -p $(PRIVATE_CLASS_INTERMEDIATES_DIR) |
| $(hide) touch $(PRIVATE_CLASS_INTERMEDIATES_DIR)/newstamp |
| $(call unzip-jar-files,$(PRIVATE_STATIC_JAVA_LIBRARIES),$(PRIVATE_CLASS_INTERMEDIATES_DIR)) |
| $(hide) if [ -e $(PRIVATE_CLASS_INTERMEDIATES_DIR)/stamp ] ; then \ |
| newerFlag=$$(echo -n "-newer $(PRIVATE_CLASS_INTERMEDIATES_DIR)/stamp") ; \ |
| fi ; \ |
| find $(PRIVATE_JAVA_SOURCES) $$newerFlag > $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list ; \ |
| if [ -d "$(PRIVATE_SOURCE_INTERMEDIATES_DIR)" ]; then \ |
| find $(PRIVATE_SOURCE_INTERMEDIATES_DIR) -name '*.java' $$newerFlag >> $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list; \ |
| fi |
| $(hide) tr ' ' '\n' < $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list \ |
| | sort -u > $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list-uniq |
| @echo "(Incremental) build source files:" |
| @cat $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list-uniq |
| $(hide) if [ -s $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list-uniq ] ; then \ |
| $(1) -encoding UTF-8 \ |
| $(strip $(PRIVATE_JAVAC_DEBUG_FLAGS)) \ |
| $(if $(findstring true,$(PRIVATE_WARNINGS_ENABLE)),$(xlint_unchecked),) \ |
| $(2) \ |
| $(addprefix -classpath ,$(strip \ |
| $(call normalize-path-list,$(PRIVATE_ALL_JAVA_LIBRARIES) $(PRIVATE_CLASS_INTERMEDIATES_DIR)))) \ |
| $(if $(findstring true,$(PRIVATE_WARNINGS_ENABLE)),$(xlint_unchecked),) \ |
| -extdirs "" -d $(PRIVATE_CLASS_INTERMEDIATES_DIR) \ |
| $(PRIVATE_JAVACFLAGS) \ |
| \@$(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list-uniq \ |
| || ( exit 41 ) \ |
| fi |
| $(hide) rm -f $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list |
| $(hide) rm -f $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list-uniq |
| $(hide) rm -f $@ |
| $(if $(PRIVATE_JAR_EXCLUDE_FILES), $(hide) find $(PRIVATE_CLASS_INTERMEDIATES_DIR) \ |
| -name $(word 1, $(PRIVATE_JAR_EXCLUDE_FILES)) \ |
| $(addprefix -o -name , $(wordlist 2, 999, $(PRIVATE_JAR_EXCLUDE_FILES))) \ |
| | xargs rm -rf) |
| $(if $(PRIVATE_JAR_PACKAGES), $(hide) find $(PRIVATE_CLASS_INTERMEDIATES_DIR) -mindepth 1 -type d \ |
| $(foreach pkg, $(PRIVATE_JAR_PACKAGES), \ |
| -not -path $(PRIVATE_CLASS_INTERMEDIATES_DIR)/$(subst .,/,$(pkg))) \ |
| | xargs rm -rf) |
| $(hide) jar $(if $(strip $(PRIVATE_JAR_MANIFEST)),-cfm,-cf) \ |
| $@ $(PRIVATE_JAR_MANIFEST) -C $(PRIVATE_CLASS_INTERMEDIATES_DIR) . |
| $(hide) mv $(PRIVATE_CLASS_INTERMEDIATES_DIR)/newstamp $(PRIVATE_CLASS_INTERMEDIATES_DIR)/stamp |
| endef |
| |
| define transform-java-to-classes.jar |
| @echo "target Java: $(PRIVATE_MODULE) ($(PRIVATE_CLASS_INTERMEDIATES_DIR))" |
| $(call compile-java,$(TARGET_JAVAC),$(PRIVATE_BOOTCLASSPATH)) |
| endef |
| endif # ENABLE_INCREMENTALJAVAC |
| |
| define transform-classes.jar-to-emma |
| $(hide) java -classpath $(EMMA_JAR) emma instr -outmode fullcopy -outfile \ |
| $(PRIVATE_EMMA_COVERAGE_FILE) -ip $< -d $(PRIVATE_EMMA_INTERMEDIATES_DIR) \ |
| $(addprefix -ix , $(PRIVATE_EMMA_COVERAGE_FILTER)) |
| endef |
| |
| #TODO: use a smaller -Xmx value for most libraries; |
| # only core.jar and framework.jar need a heap this big. |
| # Avoid the memory arguments on Windows, dx fails to load for some reason with them. |
| define transform-classes.jar-to-dex |
| @echo "target Dex: $(PRIVATE_MODULE)" |
| @mkdir -p $(dir $@) |
| $(hide) $(DX) \ |
| $(if $(findstring windows,$(HOST_OS)),,-JXms16M -JXmx2048M) \ |
| --dex --output=$@ \ |
| $(incremental_dex) \ |
| $(if $(NO_OPTIMIZE_DX), \ |
| --no-optimize) \ |
| $(if $(GENERATE_DEX_DEBUG), \ |
| --debug --verbose \ |
| --dump-to=$(@:.dex=.lst) \ |
| --dump-width=1000) \ |
| $(PRIVATE_DX_FLAGS) \ |
| $< |
| endef |
| |
| # Create a mostly-empty .jar file that we'll add to later. |
| # The MacOS jar tool doesn't like creating empty jar files, |
| # so we need to give it something. |
| define create-empty-package |
| @mkdir -p $(dir $@) |
| $(hide) touch $(dir $@)/dummy |
| $(hide) (cd $(dir $@) && jar cf $(notdir $@) dummy) |
| $(hide) zip -qd $@ dummy |
| $(hide) rm $(dir $@)/dummy |
| endef |
| |
| #TODO: we kinda want to build different asset packages for |
| # different configurations, then combine them later (or something). |
| # Per-locale, etc. |
| # A list of dynamic and static parameters; build layers for |
| # dynamic params that lay over the static ones. |
| #TODO: update the manifest to point to the package file |
| #Note that the version numbers are given to aapt as simple default |
| #values; applications can override these by explicitly stating |
| #them in their manifest. |
| define add-assets-to-package |
| $(hide) $(AAPT) package -u $(PRIVATE_AAPT_FLAGS) \ |
| $(addprefix -c , $(PRIVATE_PRODUCT_AAPT_CONFIG)) \ |
| $(addprefix --preferred-configurations , $(PRIVATE_PRODUCT_AAPT_PREF_CONFIG)) \ |
| $(addprefix -M , $(PRIVATE_ANDROID_MANIFEST)) \ |
| $(addprefix -S , $(PRIVATE_RESOURCE_DIR)) \ |
| $(addprefix -A , $(PRIVATE_ASSET_DIR)) \ |
| $(addprefix -I , $(PRIVATE_AAPT_INCLUDES)) \ |
| $(addprefix --min-sdk-version , $(PRIVATE_DEFAULT_APP_TARGET_SDK)) \ |
| $(addprefix --target-sdk-version , $(PRIVATE_DEFAULT_APP_TARGET_SDK)) \ |
| $(addprefix --product , $(TARGET_AAPT_CHARACTERISTICS)) \ |
| $(if $(filter --version-code,$(PRIVATE_AAPT_FLAGS)),,$(addprefix --version-code , $(PLATFORM_SDK_VERSION))) \ |
| $(if $(filter --version-name,$(PRIVATE_AAPT_FLAGS)),,$(addprefix --version-name , $(PLATFORM_VERSION)-$(BUILD_NUMBER))) \ |
| $(addprefix --rename-manifest-package , $(PRIVATE_MANIFEST_PACKAGE_NAME)) \ |
| $(addprefix --rename-instrumentation-target-package , $(PRIVATE_MANIFEST_INSTRUMENTATION_FOR)) \ |
| -F $@ |
| endef |
| |
| define add-jni-shared-libs-to-package |
| $(hide) rm -rf $(dir $@)lib |
| $(hide) mkdir -p $(dir $@)lib/$(PRIVATE_JNI_SHARED_LIBRARIES_ABI) |
| $(hide) cp $(PRIVATE_JNI_SHARED_LIBRARIES) $(dir $@)lib/$(PRIVATE_JNI_SHARED_LIBRARIES_ABI) |
| $(hide) (cd $(dir $@) && zip -r $(notdir $@) lib) |
| $(hide) rm -rf $(dir $@)lib |
| endef |
| |
| #TODO: update the manifest to point to the dex file |
| define add-dex-to-package |
| $(if $(filter classes.dex,$(notdir $(PRIVATE_DEX_FILE))),\ |
| $(hide) zip -qj $@ $(PRIVATE_DEX_FILE),\ |
| $(hide) _adtp_classes_dex=$(dir $(PRIVATE_DEX_FILE))classes.dex; \ |
| cp $(PRIVATE_DEX_FILE) $$_adtp_classes_dex && \ |
| zip -qj $@ $$_adtp_classes_dex && rm -f $$_adtp_classes_dex) |
| endef |
| |
| # Add java resources added by the current module. |
| # |
| define add-java-resources-to-package |
| $(call dump-words-to-file, $(PRIVATE_EXTRA_JAR_ARGS), $(dir $@)jar-arg-list) |
| $(hide) jar uf $@ @$(dir $@)jar-arg-list |
| @rm -f $(dir $@)jar-arg-list |
| endef |
| |
| # Add java resources carried by static Java libraries. |
| # |
| define add-carried-java-resources |
| $(hide) if [ -d $(PRIVATE_CLASS_INTERMEDIATES_DIR) ] ; then \ |
| java_res_jar_flags=$$(find $(PRIVATE_CLASS_INTERMEDIATES_DIR) -type f -a -not -name "*.class" \ |
| | sed -e "s?^$(PRIVATE_CLASS_INTERMEDIATES_DIR)/? -C $(PRIVATE_CLASS_INTERMEDIATES_DIR) ?"); \ |
| if [ -n "$$java_res_jar_flags" ] ; then \ |
| echo $$java_res_jar_flags >$(dir $@)java_res_jar_flags; \ |
| jar uf $@ $$java_res_jar_flags; \ |
| fi; \ |
| fi |
| endef |
| |
| # Sign a package using the specified key/cert. |
| # |
| define sign-package |
| $(hide) mv $@ $@.unsigned |
| $(hide) java -jar $(SIGNAPK_JAR) \ |
| $(PRIVATE_CERTIFICATE) $(PRIVATE_PRIVATE_KEY) \ |
| $(PRIVATE_ADDITIONAL_CERTIFICATES) $@.unsigned $@.signed |
| $(hide) mv $@.signed $@ |
| endef |
| |
| # Align STORED entries of a package on 4-byte boundaries |
| # to make them easier to mmap. |
| # |
| define align-package |
| $(hide) mv $@ $@.unaligned |
| $(hide) $(ZIPALIGN) -f 4 $@.unaligned $@.aligned |
| $(hide) mv $@.aligned $@ |
| endef |
| |
| define install-dex-debug |
| $(hide) if [ -f "$(PRIVATE_INTERMEDIATES_DIR)/classes.dex" ]; then \ |
| mkdir -p $(TOP)/dalvik/DEBUG-FILES; \ |
| $(ACP) $(PRIVATE_INTERMEDIATES_DIR)/classes.dex \ |
| $(TOP)/dalvik/DEBUG-FILES/$(PRIVATE_MODULE).dex; \ |
| fi |
| $(hide) if [ -f "$(PRIVATE_INTERMEDIATES_DIR)/classes.lst" ]; then \ |
| mkdir -p $(TOP)/dalvik/DEBUG-FILES; \ |
| $(ACP) $(PRIVATE_INTERMEDIATES_DIR)/classes.lst \ |
| $(TOP)/dalvik/DEBUG-FILES/$(PRIVATE_MODULE).lst; \ |
| fi |
| endef |
| |
| # TODO(joeo): If we can ever upgrade to post 3.81 make and get the |
| # new prebuilt rules to work, we should change this to copy the |
| # resources to the out directory and then copy the resources. |
| |
| # Note: we intentionally don't clean PRIVATE_CLASS_INTERMEDIATES_DIR |
| # in transform-java-to-classes for the sake of vm-tests. |
| define transform-host-java-to-package |
| @echo "host Java: $(PRIVATE_MODULE) ($(PRIVATE_CLASS_INTERMEDIATES_DIR))" |
| $(call compile-java,$(HOST_JAVAC),$(PRIVATE_BOOTCLASSPATH)) |
| $(if $(PRIVATE_EXTRA_JAR_ARGS), $(call add-java-resources-to-package)) |
| endef |
| |
| ########################################################### |
| ## Commands for copying files |
| ########################################################### |
| |
| # Define a rule to copy a header. Used via $(eval) by copy_headers.make. |
| # $(1): source header |
| # $(2): destination header |
| define copy-one-header |
| $(2): $(1) |
| @echo "Header: $$@" |
| $$(copy-file-to-new-target-with-cp) |
| endef |
| |
| # Define a rule to copy a file. For use via $(eval). |
| # $(1): source file |
| # $(2): destination file |
| define copy-one-file |
| $(2): $(1) | $(ACP) |
| @echo "Copy: $$@" |
| $$(copy-file-to-target) |
| endef |
| |
| # Copies many files. |
| # $(1): The files to copy. Each entry is a ':' separated src:dst pair |
| # Evaluates to the list of the dst files (ie suitable for a dependency list) |
| define copy-many-files |
| $(foreach f, $(1), $(strip \ |
| $(eval _cmf_tuple := $(subst :, ,$(f))) \ |
| $(eval _cmf_src := $(word 1,$(_cmf_tuple))) \ |
| $(eval _cmf_dest := $(word 2,$(_cmf_tuple))) \ |
| $(eval $(call copy-one-file,$(_cmf_src),$(_cmf_dest))) \ |
| $(_cmf_dest))) |
| endef |
| |
| # Copy the file only if it's a well-formed xml file. For use via $(eval). |
| # $(1): source file |
| # $(2): destination file, must end with .xml. |
| define copy-xml-file-checked |
| $(2): $(1) | $(ACP) |
| @echo "Copy xml: $$@" |
| $(hide) xmllint $$< >/dev/null # Don't print the xml file to stdout. |
| $$(copy-file-to-target) |
| endef |
| |
| # The -t option to acp and the -p option to cp is |
| # required for OSX. OSX has a ridiculous restriction |
| # where it's an error for a .a file's modification time |
| # to disagree with an internal timestamp, and this |
| # macro is used to install .a files (among other things). |
| |
| # Copy a single file from one place to another, |
| # preserving permissions and overwriting any existing |
| # file. |
| # We disable the "-t" option for acp cannot handle |
| # high resolution timestamp correctly on file systems like ext4. |
| # Therefore copy-file-to-target is the same as copy-file-to-new-target. |
| define copy-file-to-target |
| @mkdir -p $(dir $@) |
| $(hide) $(ACP) -fp $< $@ |
| endef |
| |
| # The same as copy-file-to-target, but use the local |
| # cp command instead of acp. |
| define copy-file-to-target-with-cp |
| @mkdir -p $(dir $@) |
| $(hide) cp -fp $< $@ |
| endef |
| |
| # The same as copy-file-to-target, but use the zipalign tool to do so. |
| define copy-file-to-target-with-zipalign |
| @mkdir -p $(dir $@) |
| $(hide) $(ZIPALIGN) -f 4 $< $@ |
| endef |
| |
| # The same as copy-file-to-target, but strip out "# comment"-style |
| # comments (for config files and such). |
| define copy-file-to-target-strip-comments |
| @mkdir -p $(dir $@) |
| $(hide) sed -e 's/#.*$$//' -e 's/[ \t]*$$//' -e '/^$$/d' < $< > $@ |
| endef |
| |
| # The same as copy-file-to-target, but don't preserve |
| # the old modification time. |
| define copy-file-to-new-target |
| @mkdir -p $(dir $@) |
| $(hide) $(ACP) -fp $< $@ |
| endef |
| |
| # The same as copy-file-to-new-target, but use the local |
| # cp command instead of acp. |
| define copy-file-to-new-target-with-cp |
| @mkdir -p $(dir $@) |
| $(hide) cp -f $< $@ |
| endef |
| |
| # Copy a prebuilt file to a target location. |
| define transform-prebuilt-to-target |
| @echo "$(if $(PRIVATE_IS_HOST_MODULE),host,target) Prebuilt: $(PRIVATE_MODULE) ($@)" |
| $(copy-file-to-target) |
| endef |
| |
| # Copy a prebuilt file to a target location, using zipalign on it. |
| define transform-prebuilt-to-target-with-zipalign |
| @echo "$(if $(PRIVATE_IS_HOST_MODULE),host,target) Prebuilt APK: $(PRIVATE_MODULE) ($@)" |
| $(copy-file-to-target-with-zipalign) |
| endef |
| |
| # Copy a prebuilt file to a target location, stripping "# comment" comments. |
| define transform-prebuilt-to-target-strip-comments |
| @echo "$(if $(PRIVATE_IS_HOST_MODULE),host,target) Prebuilt: $(PRIVATE_MODULE) ($@)" |
| $(copy-file-to-target-strip-comments) |
| endef |
| |
| ########################################################### |
| ## On some platforms (MacOS), after copying a static |
| ## library, ranlib must be run to update an internal |
| ## timestamp!?!?! |
| ########################################################### |
| |
| ifeq ($(HOST_RUN_RANLIB_AFTER_COPYING),true) |
| define transform-host-ranlib-copy-hack |
| $(hide) ranlib $@ || true |
| endef |
| else |
| define transform-host-ranlib-copy-hack |
| @true |
| endef |
| endif |
| |
| ifeq ($(TARGET_RUN_RANLIB_AFTER_COPYING),true) |
| define transform-ranlib-copy-hack |
| $(hide) ranlib $@ |
| endef |
| else |
| define transform-ranlib-copy-hack |
| @true |
| endef |
| endif |
| |
| |
| ########################################################### |
| ## Commands to call Proguard |
| ########################################################### |
| define transform-jar-to-proguard |
| @echo Proguard: $@ |
| $(hide) $(PROGUARD) -injars $< -outjars $@ $(PRIVATE_PROGUARD_FLAGS) |
| endef |
| |
| ########################################################### |
| ## Stuff source generated from one-off tools |
| ########################################################### |
| |
| define transform-generated-source |
| @echo "target Generated: $(PRIVATE_MODULE) <= $<" |
| @mkdir -p $(dir $@) |
| $(hide) $(PRIVATE_CUSTOM_TOOL) |
| endef |
| |
| |
| ########################################################### |
| ## Assertions about attributes of the target |
| ########################################################### |
| |
| # $(1): The file to check |
| ifndef get-file-size |
| $(error HOST_OS must define get-file-size) |
| endif |
| |
| # Convert a partition data size (eg, as reported in /proc/mtd) to the |
| # size of the image used to flash that partition (which includes a |
| # spare area for each page). |
| # $(1): the partition data size |
| define image-size-from-data-size |
| $(strip $(eval _isfds_value := $$(shell echo $$$$(($(1) / $(BOARD_NAND_PAGE_SIZE) * \ |
| ($(BOARD_NAND_PAGE_SIZE)+$(BOARD_NAND_SPARE_SIZE))))))\ |
| $(if $(filter 0, $(_isfds_value)),$(shell echo $$(($(BOARD_NAND_PAGE_SIZE)+$(BOARD_NAND_SPARE_SIZE)))),$(_isfds_value))\ |
| $(eval _isfds_value :=)) |
| endef |
| |
| # $(1): The file(s) to check (often $@) |
| # $(2): The maximum total image size, in decimal bytes |
| # $(3): the type of filesystem "yaffs" or "raw" |
| # |
| # If $(2) is empty, evaluates to "true" |
| # |
| # Reserve bad blocks. Make sure that MAX(1% of partition size, 2 blocks) |
| # is left over after the image has been flashed. Round the 1% up to the |
| # next whole flash block size. |
| define assert-max-file-size |
| $(if $(2), \ |
| size=$$(for i in $(1); do $(call get-file-size,$$i); echo +; done; echo 0); \ |
| total=$$(( $$( echo "$$size" ) )); \ |
| printname=$$(echo -n "$(1)" | tr " " +); \ |
| img_blocksize=$(call image-size-from-data-size,$(BOARD_FLASH_BLOCK_SIZE)); \ |
| if [ "$(3)" == "yaffs" ]; then \ |
| reservedblocks=8; \ |
| else \ |
| reservedblocks=0; \ |
| fi; \ |
| twoblocks=$$((img_blocksize * 2)); \ |
| onepct=$$((((($(2) / 100) - 1) / img_blocksize + 1) * img_blocksize)); \ |
| reserve=$$(((twoblocks > onepct ? twoblocks : onepct) + \ |
| reservedblocks * img_blocksize)); \ |
| maxsize=$$(($(2) - reserve)); \ |
| echo "$$printname maxsize=$$maxsize blocksize=$$img_blocksize total=$$total reserve=$$reserve"; \ |
| if [ "$$total" -gt "$$maxsize" ]; then \ |
| echo "error: $$printname too large ($$total > [$(2) - $$reserve])"; \ |
| false; \ |
| elif [ "$$total" -gt $$((maxsize - 32768)) ]; then \ |
| echo "WARNING: $$printname approaching size limit ($$total now; limit $$maxsize)"; \ |
| fi \ |
| , \ |
| true \ |
| ) |
| endef |
| |
| # Like assert-max-file-size, but the second argument is a partition |
| # size, which we'll convert to a max image size before checking it |
| # against the files. |
| # |
| # $(1): The file(s) to check (often $@) |
| # $(2): The partition size. |
| define assert-max-image-size |
| $(if $(2), \ |
| $(call assert-max-file-size,$(1),$(call image-size-from-data-size,$(2))), \ |
| true) |
| endef |
| |
| |
| ########################################################### |
| ## Define device-specific radio files |
| ########################################################### |
| INSTALLED_RADIOIMAGE_TARGET := |
| |
| # Copy a radio image file to the output location, and add it to |
| # INSTALLED_RADIOIMAGE_TARGET. |
| # $(1): filename |
| define add-radio-file |
| $(eval $(call add-radio-file-internal,$(1),$(notdir $(1)))) |
| endef |
| define add-radio-file-internal |
| INSTALLED_RADIOIMAGE_TARGET += $$(PRODUCT_OUT)/$(2) |
| $$(PRODUCT_OUT)/$(2) : $$(LOCAL_PATH)/$(1) | $$(ACP) |
| $$(transform-prebuilt-to-target) |
| endef |
| |
| # Version of add-radio-file that also arranges for the version of the |
| # file to be checked against the contents of |
| # $(TARGET_BOARD_INFO_FILE). |
| # $(1): filename |
| # $(2): name of version variable in board-info (eg, "version-baseband") |
| define add-radio-file-checked |
| $(eval $(call add-radio-file-checked-internal,$(1),$(notdir $(1)),$(2))) |
| endef |
| define add-radio-file-checked-internal |
| INSTALLED_RADIOIMAGE_TARGET += $$(PRODUCT_OUT)/$(2) |
| BOARD_INFO_CHECK += $(3):$(LOCAL_PATH)/$(1) |
| $$(PRODUCT_OUT)/$(2) : $$(LOCAL_PATH)/$(1) | $$(ACP) |
| $$(transform-prebuilt-to-target) |
| endef |
| |
| |
| ########################################################### |
| # Override the package defined in $(1), setting the |
| # variables listed below differently. |
| # |
| # $(1): The makefile to override (relative to the source |
| # tree root) |
| # $(2): Old LOCAL_PACKAGE_NAME value. |
| # $(3): New LOCAL_PACKAGE_NAME value. |
| # $(4): New LOCAL_MANIFEST_PACKAGE_NAME value. |
| # $(5): New LOCAL_CERTIFICATE value. |
| # $(6): New LOCAL_INSTRUMENTATION_FOR value. |
| # $(7): New LOCAL_MANIFEST_INSTRUMENTATION_FOR value. |
| # |
| # Note that LOCAL_PACKAGE_OVERRIDES is NOT cleared in |
| # clear_vars.mk. |
| ########################################################### |
| define inherit-package |
| $(eval $(call inherit-package-internal,$(1),$(2),$(3),$(4),$(5),$(6),$(7))) |
| endef |
| |
| define inherit-package-internal |
| LOCAL_PACKAGE_OVERRIDES \ |
| := $(strip $(1))||$(strip $(2))||$(strip $(3))||$(strip $(4))||&&$(strip $(5))||&&$(strip $(6))||&&$(strip $(7)) $(LOCAL_PACKAGE_OVERRIDES) |
| include $(1) |
| LOCAL_PACKAGE_OVERRIDES \ |
| := $(wordlist 1,$(words $(LOCAL_PACKAGE_OVERRIDES)), $(LOCAL_PACKAGE_OVERRIDES)) |
| endef |
| |
| # To be used with inherit-package above |
| # Evalutes to true if the package was overridden |
| define set-inherited-package-variables |
| $(strip $(call set-inherited-package-variables-internal)) |
| endef |
| |
| define keep-or-override |
| $(eval $(1) := $(if $(2),$(2),$($(1)))) |
| endef |
| |
| define set-inherited-package-variables-internal |
| $(eval _o := $(subst ||, ,$(lastword $(LOCAL_PACKAGE_OVERRIDES)))) |
| $(eval _n := $(subst ||, ,$(firstword $(LOCAL_PACKAGE_OVERRIDES)))) |
| $(if $(filter $(word 2,$(_n)),$(LOCAL_PACKAGE_NAME)), \ |
| $(eval LOCAL_PACKAGE_NAME := $(word 3,$(_o))) \ |
| $(eval LOCAL_MANIFEST_PACKAGE_NAME := $(word 4,$(_o))) \ |
| $(call keep-or-override,LOCAL_CERTIFICATE,$(patsubst &&%,%,$(word 5,$(_o)))) \ |
| $(call keep-or-override,LOCAL_INSTRUMENTATION_FOR,$(patsubst &&%,%,$(word 6,$(_o)))) \ |
| $(call keep-or-override,LOCAL_MANIFEST_INSTRUMENTATION_FOR,$(patsubst &&%,%,$(word 7,$(_o)))) \ |
| $(eval LOCAL_OVERRIDES_PACKAGES := $(sort $(LOCAL_OVERRIDES_PACKAGES) $(word 2,$(_o)))) \ |
| true \ |
| ,) |
| endef |
| |
| ########################################################### |
| ## Expand a module name list with REQUIRED modules |
| ########################################################### |
| # $(1): The variable name that holds the initial module name list. |
| # the variable will be modified to hold the expanded results. |
| # $(2): The initial module name list. |
| # Returns empty string (maybe with some whitespaces). |
| define expand-required-modules |
| $(eval _erm_new_modules := $(sort $(filter-out $($(1)),\ |
| $(foreach m,$(2),$(ALL_MODULES.$(m).REQUIRED)))))\ |
| $(if $(_erm_new_modules),$(eval $(1) += $(_erm_new_modules))\ |
| $(call expand-required-modules,$(1),$(_erm_new_modules))) |
| endef |
| |
| ########################################################### |
| ## API Check |
| ########################################################### |
| |
| # eval this to define a rule that runs apicheck. |
| # |
| # Args: |
| # $(1) target |
| # $(2) stable api file |
| # $(3) api file to be tested |
| # $(4) arguments for apicheck |
| # $(5) command to run if apicheck failed |
| # $(6) target dependent on this api check |
| # $(7) additional dependencies |
| define check-api |
| $(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/$(strip $(1))-timestamp: $(2) $(3) $(APICHECK) $(7) |
| @echo "Checking API:" $(1) |
| $(hide) ( $(APICHECK_COMMAND) $(4) $(2) $(3) || ( $(5) ; exit 38 ) ) |
| $(hide) mkdir -p $$(dir $$@) |
| $(hide) touch $$@ |
| $(6): $(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/$(strip $(1))-timestamp |
| endef |
| |
| ## Whether to build from source if prebuilt alternative exists |
| ########################################################### |
| # $(1): module name |
| # $(2): LOCAL_PATH |
| # Expands to empty string if not from source. |
| ifeq (true,$(ANDROID_BUILD_FROM_SOURCE)) |
| define if-build-from-source |
| true |
| endef |
| else |
| define if-build-from-source |
| $(if $(filter $(ANDROID_NO_PREBUILT_MODULES),$(1))$(filter \ |
| $(addsuffix %,$(ANDROID_NO_PREBUILT_PATHS)),$(2)),true) |
| endef |
| endif |
| |
| # Include makefile $(1) if build from source for module $(2) |
| # $(1): the makefile to include |
| # $(2): module name |
| # $(3): LOCAL_PATH |
| define include-if-build-from-source |
| $(if $(call if-build-from-source,$(2),$(3)),$(eval include $(1))) |
| endef |
| |
| ########################################################### |
| ## Other includes |
| ########################################################### |
| |
| # ----------------------------------------------------------------- |
| # Rules and functions to help copy important files to DIST_DIR |
| # when requested. |
| include $(BUILD_SYSTEM)/distdir.mk |
| |
| # Include any vendor specific definitions.mk file |
| -include $(TOPDIR)vendor/*/build/core/definitions.mk |
| |
| # broken: |
| # $(foreach file,$^,$(if $(findstring,.a,$(suffix $file)),-l$(file),$(file))) |
| |
| ########################################################### |
| ## Misc notes |
| ########################################################### |
| |
| #DEPDIR = .deps |
| #df = $(DEPDIR)/$(*F) |
| |
| #SRCS = foo.c bar.c ... |
| |
| #%.o : %.c |
| # @$(MAKEDEPEND); \ |
| # cp $(df).d $(df).P; \ |
| # sed -e 's/#.*//' -e 's/^[^:]*: *//' -e 's/ *\\$$//' \ |
| # -e '/^$$/ d' -e 's/$$/ :/' < $(df).d >> $(df).P; \ |
| # rm -f $(df).d |
| # $(COMPILE.c) -o $@ $< |
| |
| #-include $(SRCS:%.c=$(DEPDIR)/%.P) |
| |
| |
| #%.o : %.c |
| # $(COMPILE.c) -MD -o $@ $< |
| # @cp $*.d $*.P; \ |
| # sed -e 's/#.*//' -e 's/^[^:]*: *//' -e 's/ *\\$$//' \ |
| # -e '/^$$/ d' -e 's/$$/ :/' < $*.d >> $*.P; \ |
| # rm -f $*.d |