| function hmm() { |
| cat <<EOF |
| Invoke ". build/envsetup.sh" from your shell to add the following functions to your environment: |
| - lunch: lunch <product_name>-<build_variant> |
| - tapas: tapas [<App1> <App2> ...] [arm|x86|mips|armv5|arm64|x86_64|mips64] [eng|userdebug|user] |
| - croot: Changes directory to the top of the tree. |
| - m: Makes from the top of the tree. |
| - mm: Builds all of the modules in the current directory, but not their dependencies. |
| - mmm: Builds all of the modules in the supplied directories, but not their dependencies. |
| To limit the modules being built use the syntax: mmm dir/:target1,target2. |
| - mma: Builds all of the modules in the current directory, and their dependencies. |
| - mmma: Builds all of the modules in the supplied directories, and their dependencies. |
| - provision: Flash device with all required partitions. Options will be passed on to fastboot. |
| - cgrep: Greps on all local C/C++ files. |
| - ggrep: Greps on all local Gradle files. |
| - jgrep: Greps on all local Java files. |
| - resgrep: Greps on all local res/*.xml files. |
| - mangrep: Greps on all local AndroidManifest.xml files. |
| - mgrep: Greps on all local Makefiles files. |
| - sepgrep: Greps on all local sepolicy files. |
| - sgrep: Greps on all local source files. |
| - godir: Go to the directory containing a file. |
| |
| Environment options: |
| - SANITIZE_HOST: Set to 'true' to use ASAN for all host modules. Note that |
| ASAN_OPTIONS=detect_leaks=0 will be set by default until the |
| build is leak-check clean. |
| |
| Look at the source to view more functions. The complete list is: |
| EOF |
| T=$(gettop) |
| local A |
| A="" |
| for i in `cat $T/build/envsetup.sh | sed -n "/^[[:blank:]]*function /s/function \([a-z_]*\).*/\1/p" | sort | uniq`; do |
| A="$A $i" |
| done |
| echo $A |
| } |
| |
| # Get all the build variables needed by this script in a single call to the build system. |
| function build_build_var_cache() |
| { |
| T=$(gettop) |
| # Grep out the variable names from the script. |
| cached_vars=`cat $T/build/envsetup.sh | tr '()' ' ' | awk '{for(i=1;i<=NF;i++) if($i~/get_build_var/) print $(i+1)}' | sort -u | tr '\n' ' '` |
| cached_abs_vars=`cat $T/build/envsetup.sh | tr '()' ' ' | awk '{for(i=1;i<=NF;i++) if($i~/get_abs_build_var/) print $(i+1)}' | sort -u | tr '\n' ' '` |
| # Call the build system to dump the "<val>=<value>" pairs as a shell script. |
| build_dicts_script=`\cd $T; CALLED_FROM_SETUP=true BUILD_SYSTEM=build/core \ |
| command make --no-print-directory -f build/core/config.mk \ |
| dump-many-vars \ |
| DUMP_MANY_VARS="$cached_vars" \ |
| DUMP_MANY_ABS_VARS="$cached_abs_vars" \ |
| DUMP_VAR_PREFIX="var_cache_" \ |
| DUMP_ABS_VAR_PREFIX="abs_var_cache_"` |
| local ret=$? |
| if [ $ret -ne 0 ] |
| then |
| unset build_dicts_script |
| return $ret |
| fi |
| # Excute the script to store the "<val>=<value>" pairs as shell variables. |
| eval "$build_dicts_script" |
| ret=$? |
| unset build_dicts_script |
| if [ $ret -ne 0 ] |
| then |
| return $ret |
| fi |
| BUILD_VAR_CACHE_READY="true" |
| } |
| |
| # Delete the build var cache, so that we can still call into the build system |
| # to get build variables not listed in this script. |
| function destroy_build_var_cache() |
| { |
| unset BUILD_VAR_CACHE_READY |
| for v in $cached_vars; do |
| unset var_cache_$v |
| done |
| unset cached_vars |
| for v in $cached_abs_vars; do |
| unset abs_var_cache_$v |
| done |
| unset cached_abs_vars |
| } |
| |
| # Get the value of a build variable as an absolute path. |
| function get_abs_build_var() |
| { |
| if [ "$BUILD_VAR_CACHE_READY" = "true" ] |
| then |
| eval "echo \"\${abs_var_cache_$1}\"" |
| return |
| fi |
| |
| T=$(gettop) |
| if [ ! "$T" ]; then |
| echo "Couldn't locate the top of the tree. Try setting TOP." >&2 |
| return |
| fi |
| (\cd $T; CALLED_FROM_SETUP=true BUILD_SYSTEM=build/core \ |
| command make --no-print-directory -f build/core/config.mk dumpvar-abs-$1) |
| } |
| |
| # Get the exact value of a build variable. |
| function get_build_var() |
| { |
| if [ "$BUILD_VAR_CACHE_READY" = "true" ] |
| then |
| eval "echo \"\${var_cache_$1}\"" |
| return |
| fi |
| |
| T=$(gettop) |
| if [ ! "$T" ]; then |
| echo "Couldn't locate the top of the tree. Try setting TOP." >&2 |
| return |
| fi |
| (\cd $T; CALLED_FROM_SETUP=true BUILD_SYSTEM=build/core \ |
| command make --no-print-directory -f build/core/config.mk dumpvar-$1) |
| } |
| |
| # check to see if the supplied product is one we can build |
| function check_product() |
| { |
| T=$(gettop) |
| if [ ! "$T" ]; then |
| echo "Couldn't locate the top of the tree. Try setting TOP." >&2 |
| return |
| fi |
| TARGET_PRODUCT=$1 \ |
| TARGET_BUILD_VARIANT= \ |
| TARGET_BUILD_TYPE= \ |
| TARGET_BUILD_APPS= \ |
| get_build_var TARGET_DEVICE > /dev/null |
| # hide successful answers, but allow the errors to show |
| } |
| |
| VARIANT_CHOICES=(user userdebug eng) |
| |
| # check to see if the supplied variant is valid |
| function check_variant() |
| { |
| for v in ${VARIANT_CHOICES[@]} |
| do |
| if [ "$v" = "$1" ] |
| then |
| return 0 |
| fi |
| done |
| return 1 |
| } |
| |
| function setpaths() |
| { |
| T=$(gettop) |
| if [ ! "$T" ]; then |
| echo "Couldn't locate the top of the tree. Try setting TOP." |
| return |
| fi |
| |
| ################################################################## |
| # # |
| # Read me before you modify this code # |
| # # |
| # This function sets ANDROID_BUILD_PATHS to what it is adding # |
| # to PATH, and the next time it is run, it removes that from # |
| # PATH. This is required so lunch can be run more than once # |
| # and still have working paths. # |
| # # |
| ################################################################## |
| |
| # Note: on windows/cygwin, ANDROID_BUILD_PATHS will contain spaces |
| # due to "C:\Program Files" being in the path. |
| |
| # out with the old |
| if [ -n "$ANDROID_BUILD_PATHS" ] ; then |
| export PATH=${PATH/$ANDROID_BUILD_PATHS/} |
| fi |
| if [ -n "$ANDROID_PRE_BUILD_PATHS" ] ; then |
| export PATH=${PATH/$ANDROID_PRE_BUILD_PATHS/} |
| # strip leading ':', if any |
| export PATH=${PATH/:%/} |
| fi |
| |
| # and in with the new |
| prebuiltdir=$(getprebuilt) |
| gccprebuiltdir=$(get_abs_build_var ANDROID_GCC_PREBUILTS) |
| |
| # defined in core/config.mk |
| targetgccversion=$(get_build_var TARGET_GCC_VERSION) |
| targetgccversion2=$(get_build_var 2ND_TARGET_GCC_VERSION) |
| export TARGET_GCC_VERSION=$targetgccversion |
| |
| # The gcc toolchain does not exists for windows/cygwin. In this case, do not reference it. |
| export ANDROID_TOOLCHAIN= |
| export ANDROID_TOOLCHAIN_2ND_ARCH= |
| local ARCH=$(get_build_var TARGET_ARCH) |
| case $ARCH in |
| x86) toolchaindir=x86/x86_64-linux-android-$targetgccversion/bin |
| ;; |
| x86_64) toolchaindir=x86/x86_64-linux-android-$targetgccversion/bin |
| ;; |
| arm) toolchaindir=arm/arm-linux-androideabi-$targetgccversion/bin |
| ;; |
| arm64) toolchaindir=aarch64/aarch64-linux-android-$targetgccversion/bin; |
| toolchaindir2=arm/arm-linux-androideabi-$targetgccversion2/bin |
| ;; |
| mips|mips64) toolchaindir=mips/mips64el-linux-android-$targetgccversion/bin |
| ;; |
| *) |
| echo "Can't find toolchain for unknown architecture: $ARCH" |
| toolchaindir=xxxxxxxxx |
| ;; |
| esac |
| if [ -d "$gccprebuiltdir/$toolchaindir" ]; then |
| export ANDROID_TOOLCHAIN=$gccprebuiltdir/$toolchaindir |
| fi |
| |
| if [ -d "$gccprebuiltdir/$toolchaindir2" ]; then |
| export ANDROID_TOOLCHAIN_2ND_ARCH=$gccprebuiltdir/$toolchaindir2 |
| fi |
| |
| export ANDROID_DEV_SCRIPTS=$T/development/scripts:$T/prebuilts/devtools/tools:$T/external/selinux/prebuilts/bin |
| export ANDROID_BUILD_PATHS=$(get_build_var ANDROID_BUILD_PATHS):$ANDROID_TOOLCHAIN:$ANDROID_TOOLCHAIN_2ND_ARCH:$ANDROID_DEV_SCRIPTS: |
| |
| # If prebuilts/android-emulator/<system>/ exists, prepend it to our PATH |
| # to ensure that the corresponding 'emulator' binaries are used. |
| case $(uname -s) in |
| Darwin) |
| ANDROID_EMULATOR_PREBUILTS=$T/prebuilts/android-emulator/darwin-x86_64 |
| ;; |
| Linux) |
| ANDROID_EMULATOR_PREBUILTS=$T/prebuilts/android-emulator/linux-x86_64 |
| ;; |
| *) |
| ANDROID_EMULATOR_PREBUILTS= |
| ;; |
| esac |
| if [ -n "$ANDROID_EMULATOR_PREBUILTS" -a -d "$ANDROID_EMULATOR_PREBUILTS" ]; then |
| ANDROID_BUILD_PATHS=$ANDROID_BUILD_PATHS$ANDROID_EMULATOR_PREBUILTS: |
| export ANDROID_EMULATOR_PREBUILTS |
| fi |
| |
| export PATH=$ANDROID_BUILD_PATHS$PATH |
| export PYTHONPATH=$T/development/python-packages:$PYTHONPATH |
| |
| unset ANDROID_JAVA_TOOLCHAIN |
| unset ANDROID_PRE_BUILD_PATHS |
| if [ -n "$JAVA_HOME" ]; then |
| export ANDROID_JAVA_TOOLCHAIN=$JAVA_HOME/bin |
| export ANDROID_PRE_BUILD_PATHS=$ANDROID_JAVA_TOOLCHAIN: |
| export PATH=$ANDROID_PRE_BUILD_PATHS$PATH |
| fi |
| |
| unset ANDROID_PRODUCT_OUT |
| export ANDROID_PRODUCT_OUT=$(get_abs_build_var PRODUCT_OUT) |
| export OUT=$ANDROID_PRODUCT_OUT |
| |
| unset ANDROID_HOST_OUT |
| export ANDROID_HOST_OUT=$(get_abs_build_var HOST_OUT) |
| |
| # needed for building linux on MacOS |
| # TODO: fix the path |
| #export HOST_EXTRACFLAGS="-I "$T/system/kernel_headers/host_include |
| } |
| |
| function printconfig() |
| { |
| T=$(gettop) |
| if [ ! "$T" ]; then |
| echo "Couldn't locate the top of the tree. Try setting TOP." >&2 |
| return |
| fi |
| get_build_var report_config |
| } |
| |
| function set_stuff_for_environment() |
| { |
| settitle |
| set_java_home |
| setpaths |
| set_sequence_number |
| |
| export ANDROID_BUILD_TOP=$(gettop) |
| # With this environment variable new GCC can apply colors to warnings/errors |
| export GCC_COLORS='error=01;31:warning=01;35:note=01;36:caret=01;32:locus=01:quote=01' |
| export ASAN_OPTIONS=detect_leaks=0 |
| } |
| |
| function set_sequence_number() |
| { |
| export BUILD_ENV_SEQUENCE_NUMBER=11 |
| } |
| |
| function settitle() |
| { |
| if [ "$STAY_OFF_MY_LAWN" = "" ]; then |
| local arch=$(gettargetarch) |
| local product=$TARGET_PRODUCT |
| local variant=$TARGET_BUILD_VARIANT |
| local apps=$TARGET_BUILD_APPS |
| if [ -z "$apps" ]; then |
| export PROMPT_COMMAND="echo -ne \"\033]0;[${arch}-${product}-${variant}] ${USER}@${HOSTNAME}: ${PWD}\007\"" |
| else |
| export PROMPT_COMMAND="echo -ne \"\033]0;[$arch $apps $variant] ${USER}@${HOSTNAME}: ${PWD}\007\"" |
| fi |
| fi |
| } |
| |
| function addcompletions() |
| { |
| local T dir f |
| |
| # Keep us from trying to run in something that isn't bash. |
| if [ -z "${BASH_VERSION}" ]; then |
| return |
| fi |
| |
| # Keep us from trying to run in bash that's too old. |
| if [ ${BASH_VERSINFO[0]} -lt 3 ]; then |
| return |
| fi |
| |
| dir="sdk/bash_completion" |
| if [ -d ${dir} ]; then |
| for f in `/bin/ls ${dir}/[a-z]*.bash 2> /dev/null`; do |
| echo "including $f" |
| . $f |
| done |
| fi |
| } |
| |
| function choosetype() |
| { |
| echo "Build type choices are:" |
| echo " 1. release" |
| echo " 2. debug" |
| echo |
| |
| local DEFAULT_NUM DEFAULT_VALUE |
| DEFAULT_NUM=1 |
| DEFAULT_VALUE=release |
| |
| export TARGET_BUILD_TYPE= |
| local ANSWER |
| while [ -z $TARGET_BUILD_TYPE ] |
| do |
| echo -n "Which would you like? ["$DEFAULT_NUM"] " |
| if [ -z "$1" ] ; then |
| read ANSWER |
| else |
| echo $1 |
| ANSWER=$1 |
| fi |
| case $ANSWER in |
| "") |
| export TARGET_BUILD_TYPE=$DEFAULT_VALUE |
| ;; |
| 1) |
| export TARGET_BUILD_TYPE=release |
| ;; |
| release) |
| export TARGET_BUILD_TYPE=release |
| ;; |
| 2) |
| export TARGET_BUILD_TYPE=debug |
| ;; |
| debug) |
| export TARGET_BUILD_TYPE=debug |
| ;; |
| *) |
| echo |
| echo "I didn't understand your response. Please try again." |
| echo |
| ;; |
| esac |
| if [ -n "$1" ] ; then |
| break |
| fi |
| done |
| |
| build_build_var_cache |
| set_stuff_for_environment |
| destroy_build_var_cache |
| } |
| |
| # |
| # This function isn't really right: It chooses a TARGET_PRODUCT |
| # based on the list of boards. Usually, that gets you something |
| # that kinda works with a generic product, but really, you should |
| # pick a product by name. |
| # |
| function chooseproduct() |
| { |
| if [ "x$TARGET_PRODUCT" != x ] ; then |
| default_value=$TARGET_PRODUCT |
| else |
| default_value=aosp_arm |
| fi |
| |
| export TARGET_BUILD_APPS= |
| export TARGET_PRODUCT= |
| local ANSWER |
| while [ -z "$TARGET_PRODUCT" ] |
| do |
| echo -n "Which product would you like? [$default_value] " |
| if [ -z "$1" ] ; then |
| read ANSWER |
| else |
| echo $1 |
| ANSWER=$1 |
| fi |
| |
| if [ -z "$ANSWER" ] ; then |
| export TARGET_PRODUCT=$default_value |
| else |
| if check_product $ANSWER |
| then |
| export TARGET_PRODUCT=$ANSWER |
| else |
| echo "** Not a valid product: $ANSWER" |
| fi |
| fi |
| if [ -n "$1" ] ; then |
| break |
| fi |
| done |
| |
| build_build_var_cache |
| set_stuff_for_environment |
| destroy_build_var_cache |
| } |
| |
| function choosevariant() |
| { |
| echo "Variant choices are:" |
| local index=1 |
| local v |
| for v in ${VARIANT_CHOICES[@]} |
| do |
| # The product name is the name of the directory containing |
| # the makefile we found, above. |
| echo " $index. $v" |
| index=$(($index+1)) |
| done |
| |
| local default_value=eng |
| local ANSWER |
| |
| export TARGET_BUILD_VARIANT= |
| while [ -z "$TARGET_BUILD_VARIANT" ] |
| do |
| echo -n "Which would you like? [$default_value] " |
| if [ -z "$1" ] ; then |
| read ANSWER |
| else |
| echo $1 |
| ANSWER=$1 |
| fi |
| |
| if [ -z "$ANSWER" ] ; then |
| export TARGET_BUILD_VARIANT=$default_value |
| elif (echo -n $ANSWER | grep -q -e "^[0-9][0-9]*$") ; then |
| if [ "$ANSWER" -le "${#VARIANT_CHOICES[@]}" ] ; then |
| export TARGET_BUILD_VARIANT=${VARIANT_CHOICES[$(($ANSWER-1))]} |
| fi |
| else |
| if check_variant $ANSWER |
| then |
| export TARGET_BUILD_VARIANT=$ANSWER |
| else |
| echo "** Not a valid variant: $ANSWER" |
| fi |
| fi |
| if [ -n "$1" ] ; then |
| break |
| fi |
| done |
| } |
| |
| function choosecombo() |
| { |
| choosetype $1 |
| |
| echo |
| echo |
| chooseproduct $2 |
| |
| echo |
| echo |
| choosevariant $3 |
| |
| echo |
| build_build_var_cache |
| set_stuff_for_environment |
| printconfig |
| destroy_build_var_cache |
| } |
| |
| # Clear this variable. It will be built up again when the vendorsetup.sh |
| # files are included at the end of this file. |
| unset LUNCH_MENU_CHOICES |
| function add_lunch_combo() |
| { |
| local new_combo=$1 |
| local c |
| for c in ${LUNCH_MENU_CHOICES[@]} ; do |
| if [ "$new_combo" = "$c" ] ; then |
| return |
| fi |
| done |
| LUNCH_MENU_CHOICES=(${LUNCH_MENU_CHOICES[@]} $new_combo) |
| } |
| |
| # add the default one here |
| add_lunch_combo aosp_arm-eng |
| add_lunch_combo aosp_arm64-eng |
| add_lunch_combo aosp_mips-eng |
| add_lunch_combo aosp_mips64-eng |
| add_lunch_combo aosp_x86-eng |
| add_lunch_combo aosp_x86_64-eng |
| |
| function print_lunch_menu() |
| { |
| local uname=$(uname) |
| echo |
| echo "You're building on" $uname |
| echo |
| echo "Lunch menu... pick a combo:" |
| |
| local i=1 |
| local choice |
| for choice in ${LUNCH_MENU_CHOICES[@]} |
| do |
| echo " $i. $choice" |
| i=$(($i+1)) |
| done |
| |
| echo |
| } |
| |
| function lunch() |
| { |
| local answer |
| |
| if [ "$1" ] ; then |
| answer=$1 |
| else |
| print_lunch_menu |
| echo -n "Which would you like? [aosp_arm-eng] " |
| read answer |
| fi |
| |
| local selection= |
| |
| if [ -z "$answer" ] |
| then |
| selection=aosp_arm-eng |
| elif (echo -n $answer | grep -q -e "^[0-9][0-9]*$") |
| then |
| if [ $answer -le ${#LUNCH_MENU_CHOICES[@]} ] |
| then |
| selection=${LUNCH_MENU_CHOICES[$(($answer-1))]} |
| fi |
| elif (echo -n $answer | grep -q -e "^[^\-][^\-]*-[^\-][^\-]*$") |
| then |
| selection=$answer |
| fi |
| |
| if [ -z "$selection" ] |
| then |
| echo |
| echo "Invalid lunch combo: $answer" |
| return 1 |
| fi |
| |
| export TARGET_BUILD_APPS= |
| |
| local variant=$(echo -n $selection | sed -e "s/^[^\-]*-//") |
| check_variant $variant |
| if [ $? -ne 0 ] |
| then |
| echo |
| echo "** Invalid variant: '$variant'" |
| echo "** Must be one of ${VARIANT_CHOICES[@]}" |
| variant= |
| fi |
| |
| local product=$(echo -n $selection | sed -e "s/-.*$//") |
| TARGET_PRODUCT=$product \ |
| TARGET_BUILD_VARIANT=$variant \ |
| build_build_var_cache |
| if [ $? -ne 0 ] |
| then |
| echo |
| echo "** Don't have a product spec for: '$product'" |
| echo "** Do you have the right repo manifest?" |
| product= |
| fi |
| |
| if [ -z "$product" -o -z "$variant" ] |
| then |
| echo |
| return 1 |
| fi |
| |
| export TARGET_PRODUCT=$product |
| export TARGET_BUILD_VARIANT=$variant |
| export TARGET_BUILD_TYPE=release |
| |
| echo |
| |
| set_stuff_for_environment |
| printconfig |
| destroy_build_var_cache |
| } |
| |
| # Tab completion for lunch. |
| function _lunch() |
| { |
| local cur prev opts |
| COMPREPLY=() |
| cur="${COMP_WORDS[COMP_CWORD]}" |
| prev="${COMP_WORDS[COMP_CWORD-1]}" |
| |
| COMPREPLY=( $(compgen -W "${LUNCH_MENU_CHOICES[*]}" -- ${cur}) ) |
| return 0 |
| } |
| complete -F _lunch lunch |
| |
| # Configures the build to build unbundled apps. |
| # Run tapas with one or more app names (from LOCAL_PACKAGE_NAME) |
| function tapas() |
| { |
| local arch="$(echo $* | xargs -n 1 echo | \grep -E '^(arm|x86|mips|armv5|arm64|x86_64|mips64)$' | xargs)" |
| local variant="$(echo $* | xargs -n 1 echo | \grep -E '^(user|userdebug|eng)$' | xargs)" |
| local density="$(echo $* | xargs -n 1 echo | \grep -E '^(ldpi|mdpi|tvdpi|hdpi|xhdpi|xxhdpi|xxxhdpi|alldpi)$' | xargs)" |
| local apps="$(echo $* | xargs -n 1 echo | \grep -E -v '^(user|userdebug|eng|arm|x86|mips|armv5|arm64|x86_64|mips64|ldpi|mdpi|tvdpi|hdpi|xhdpi|xxhdpi|xxxhdpi|alldpi)$' | xargs)" |
| |
| if [ $(echo $arch | wc -w) -gt 1 ]; then |
| echo "tapas: Error: Multiple build archs supplied: $arch" |
| return |
| fi |
| if [ $(echo $variant | wc -w) -gt 1 ]; then |
| echo "tapas: Error: Multiple build variants supplied: $variant" |
| return |
| fi |
| if [ $(echo $density | wc -w) -gt 1 ]; then |
| echo "tapas: Error: Multiple densities supplied: $density" |
| return |
| fi |
| |
| local product=aosp_arm |
| case $arch in |
| x86) product=aosp_x86;; |
| mips) product=aosp_mips;; |
| armv5) product=generic_armv5;; |
| arm64) product=aosp_arm64;; |
| x86_64) product=aosp_x86_64;; |
| mips64) product=aosp_mips64;; |
| esac |
| if [ -z "$variant" ]; then |
| variant=eng |
| fi |
| if [ -z "$apps" ]; then |
| apps=all |
| fi |
| if [ -z "$density" ]; then |
| density=alldpi |
| fi |
| |
| export TARGET_PRODUCT=$product |
| export TARGET_BUILD_VARIANT=$variant |
| export TARGET_BUILD_DENSITY=$density |
| export TARGET_BUILD_TYPE=release |
| export TARGET_BUILD_APPS=$apps |
| |
| build_build_var_cache |
| set_stuff_for_environment |
| printconfig |
| destroy_build_var_cache |
| } |
| |
| function gettop |
| { |
| local TOPFILE=build/core/envsetup.mk |
| if [ -n "$TOP" -a -f "$TOP/$TOPFILE" ] ; then |
| # The following circumlocution ensures we remove symlinks from TOP. |
| (cd $TOP; PWD= /bin/pwd) |
| else |
| if [ -f $TOPFILE ] ; then |
| # The following circumlocution (repeated below as well) ensures |
| # that we record the true directory name and not one that is |
| # faked up with symlink names. |
| PWD= /bin/pwd |
| else |
| local HERE=$PWD |
| T= |
| while [ \( ! \( -f $TOPFILE \) \) -a \( $PWD != "/" \) ]; do |
| \cd .. |
| T=`PWD= /bin/pwd -P` |
| done |
| \cd $HERE |
| if [ -f "$T/$TOPFILE" ]; then |
| echo $T |
| fi |
| fi |
| fi |
| } |
| |
| # Return driver for "make", if any (eg. static analyzer) |
| function getdriver() |
| { |
| local T="$1" |
| test "$WITH_STATIC_ANALYZER" = "0" && unset WITH_STATIC_ANALYZER |
| if [ -n "$WITH_STATIC_ANALYZER" ]; then |
| # Use scan-build to collect all static analyzer reports into directory |
| # /tmp/scan-build-yyyy-mm-dd-hhmmss-* |
| # The clang compiler passed by --use-analyzer here is not important. |
| # build/core/binary.mk will set CLANG_CXX and CLANG before calling |
| # c++-analyzer and ccc-analyzer. |
| local CLANG_VERSION=$(get_build_var LLVM_PREBUILTS_VERSION) |
| local BUILD_OS=$(get_build_var BUILD_OS) |
| local CLANG_DIR="$T/prebuilts/clang/host/${BUILD_OS}-x86/${CLANG_VERSION}" |
| echo "\ |
| ${CLANG_DIR}/tools/scan-build/bin/scan-build \ |
| --use-analyzer ${CLANG_DIR}/bin/clang \ |
| --status-bugs" |
| fi |
| } |
| |
| function m() |
| { |
| local T=$(gettop) |
| local DRV=$(getdriver $T) |
| if [ "$T" ]; then |
| $DRV make -C $T -f build/core/main.mk $@ |
| else |
| echo "Couldn't locate the top of the tree. Try setting TOP." |
| return 1 |
| fi |
| } |
| |
| function findmakefile() |
| { |
| TOPFILE=build/core/envsetup.mk |
| local HERE=$PWD |
| T= |
| while [ \( ! \( -f $TOPFILE \) \) -a \( $PWD != "/" \) ]; do |
| T=`PWD= /bin/pwd` |
| if [ -f "$T/Android.mk" -o -f "$T/Android.bp" ]; then |
| echo $T/Android.mk |
| \cd $HERE |
| return |
| fi |
| \cd .. |
| done |
| \cd $HERE |
| } |
| |
| function mm() |
| { |
| local T=$(gettop) |
| local DRV=$(getdriver $T) |
| # If we're sitting in the root of the build tree, just do a |
| # normal make. |
| if [ -f build/core/envsetup.mk -a -f Makefile ]; then |
| $DRV make $@ |
| else |
| # Find the closest Android.mk file. |
| local M=$(findmakefile) |
| local MODULES= |
| local GET_INSTALL_PATH= |
| local ARGS= |
| # Remove the path to top as the makefilepath needs to be relative |
| local M=`echo $M|sed 's:'$T'/::'` |
| if [ ! "$T" ]; then |
| echo "Couldn't locate the top of the tree. Try setting TOP." |
| return 1 |
| elif [ ! "$M" ]; then |
| echo "Couldn't locate a makefile from the current directory." |
| return 1 |
| else |
| for ARG in $@; do |
| case $ARG in |
| GET-INSTALL-PATH) GET_INSTALL_PATH=$ARG;; |
| esac |
| done |
| if [ -n "$GET_INSTALL_PATH" ]; then |
| MODULES= |
| ARGS=GET-INSTALL-PATH |
| else |
| MODULES=MODULES-IN-$(dirname ${M}) |
| # Convert "/" to "-". |
| MODULES=${MODULES//\//-} |
| ARGS=$@ |
| fi |
| if [ "1" = "${WITH_TIDY_ONLY}" -o "true" = "${WITH_TIDY_ONLY}" ]; then |
| MODULES=tidy_only |
| fi |
| ONE_SHOT_MAKEFILE=$M $DRV make -C $T -f build/core/main.mk $MODULES $ARGS |
| fi |
| fi |
| } |
| |
| function mmm() |
| { |
| local T=$(gettop) |
| local DRV=$(getdriver $T) |
| if [ "$T" ]; then |
| local MAKEFILE= |
| local MODULES= |
| local MODULES_IN_PATHS= |
| local ARGS= |
| local DIR TO_CHOP |
| local DIR_MODULES |
| local GET_INSTALL_PATH= |
| local DASH_ARGS=$(echo "$@" | awk -v RS=" " -v ORS=" " '/^-.*$/') |
| local DIRS=$(echo "$@" | awk -v RS=" " -v ORS=" " '/^[^-].*$/') |
| for DIR in $DIRS ; do |
| DIR_MODULES=`echo $DIR | sed -n -e 's/.*:\(.*$\)/\1/p' | sed 's/,/ /'` |
| DIR=`echo $DIR | sed -e 's/:.*//' -e 's:/$::'` |
| # Remove the leading ./ and trailing / if any exists. |
| DIR=${DIR#./} |
| DIR=${DIR%/} |
| if [ -f $DIR/Android.mk -o -f $DIR/Android.bp ]; then |
| if [ "$DIR_MODULES" = "" ]; then |
| MODULES_IN_PATHS="$MODULES_IN_PATHS MODULES-IN-$DIR" |
| else |
| MODULES="$MODULES $DIR_MODULES" |
| fi |
| local TO_CHOP=`(\cd -P -- $T && pwd -P) | wc -c | tr -d ' '` |
| local TO_CHOP=`expr $TO_CHOP + 1` |
| local START=`PWD= /bin/pwd` |
| local MFILE=`echo $START | cut -c${TO_CHOP}-` |
| if [ "$MFILE" = "" ] ; then |
| MFILE=$DIR/Android.mk |
| else |
| MFILE=$MFILE/$DIR/Android.mk |
| fi |
| MAKEFILE="$MAKEFILE $MFILE" |
| else |
| case $DIR in |
| showcommands | snod | dist | *=*) ARGS="$ARGS $DIR";; |
| GET-INSTALL-PATH) GET_INSTALL_PATH=$DIR;; |
| *) if [ -d $DIR ]; then |
| echo "No Android.mk in $DIR."; |
| else |
| echo "Couldn't locate the directory $DIR"; |
| fi |
| return 1;; |
| esac |
| fi |
| done |
| if [ -n "$GET_INSTALL_PATH" ]; then |
| ARGS=$GET_INSTALL_PATH |
| MODULES= |
| MODULES_IN_PATHS= |
| fi |
| if [ "1" = "${WITH_TIDY_ONLY}" -o "true" = "${WITH_TIDY_ONLY}" ]; then |
| MODULES=tidy_only |
| MODULES_IN_PATHS= |
| fi |
| # Convert "/" to "-". |
| MODULES_IN_PATHS=${MODULES_IN_PATHS//\//-} |
| ONE_SHOT_MAKEFILE="$MAKEFILE" $DRV make -C $T -f build/core/main.mk $DASH_ARGS $MODULES $MODULES_IN_PATHS $ARGS |
| else |
| echo "Couldn't locate the top of the tree. Try setting TOP." |
| return 1 |
| fi |
| } |
| |
| function mma() |
| { |
| local T=$(gettop) |
| local DRV=$(getdriver $T) |
| if [ -f build/core/envsetup.mk -a -f Makefile ]; then |
| $DRV make $@ |
| else |
| if [ ! "$T" ]; then |
| echo "Couldn't locate the top of the tree. Try setting TOP." |
| return 1 |
| fi |
| local MY_PWD=`PWD= /bin/pwd|sed 's:'$T'/::'` |
| local MODULES_IN_PATHS=MODULES-IN-$MY_PWD |
| # Convert "/" to "-". |
| MODULES_IN_PATHS=${MODULES_IN_PATHS//\//-} |
| $DRV make -C $T -f build/core/main.mk $@ $MODULES_IN_PATHS |
| fi |
| } |
| |
| function mmma() |
| { |
| local T=$(gettop) |
| local DRV=$(getdriver $T) |
| if [ "$T" ]; then |
| local DASH_ARGS=$(echo "$@" | awk -v RS=" " -v ORS=" " '/^-.*$/') |
| local DIRS=$(echo "$@" | awk -v RS=" " -v ORS=" " '/^[^-].*$/') |
| local MY_PWD=`PWD= /bin/pwd` |
| if [ "$MY_PWD" = "$T" ]; then |
| MY_PWD= |
| else |
| MY_PWD=`echo $MY_PWD|sed 's:'$T'/::'` |
| fi |
| local DIR= |
| local MODULES_IN_PATHS= |
| local ARGS= |
| for DIR in $DIRS ; do |
| if [ -d $DIR ]; then |
| # Remove the leading ./ and trailing / if any exists. |
| DIR=${DIR#./} |
| DIR=${DIR%/} |
| if [ "$MY_PWD" != "" ]; then |
| DIR=$MY_PWD/$DIR |
| fi |
| MODULES_IN_PATHS="$MODULES_IN_PATHS MODULES-IN-$DIR" |
| else |
| case $DIR in |
| showcommands | snod | dist | *=*) ARGS="$ARGS $DIR";; |
| *) echo "Couldn't find directory $DIR"; return 1;; |
| esac |
| fi |
| done |
| # Convert "/" to "-". |
| MODULES_IN_PATHS=${MODULES_IN_PATHS//\//-} |
| $DRV make -C $T -f build/core/main.mk $DASH_ARGS $ARGS $MODULES_IN_PATHS |
| else |
| echo "Couldn't locate the top of the tree. Try setting TOP." |
| return 1 |
| fi |
| } |
| |
| function croot() |
| { |
| T=$(gettop) |
| if [ "$T" ]; then |
| if [ "$1" ]; then |
| \cd $(gettop)/$1 |
| else |
| \cd $(gettop) |
| fi |
| else |
| echo "Couldn't locate the top of the tree. Try setting TOP." |
| fi |
| } |
| |
| function cproj() |
| { |
| TOPFILE=build/core/envsetup.mk |
| local HERE=$PWD |
| T= |
| while [ \( ! \( -f $TOPFILE \) \) -a \( $PWD != "/" \) ]; do |
| T=$PWD |
| if [ -f "$T/Android.mk" ]; then |
| \cd $T |
| return |
| fi |
| \cd .. |
| done |
| \cd $HERE |
| echo "can't find Android.mk" |
| } |
| |
| # simplified version of ps; output in the form |
| # <pid> <procname> |
| function qpid() { |
| local prepend='' |
| local append='' |
| if [ "$1" = "--exact" ]; then |
| prepend=' ' |
| append='$' |
| shift |
| elif [ "$1" = "--help" -o "$1" = "-h" ]; then |
| echo "usage: qpid [[--exact] <process name|pid>" |
| return 255 |
| fi |
| |
| local EXE="$1" |
| if [ "$EXE" ] ; then |
| qpid | \grep "$prepend$EXE$append" |
| else |
| adb shell ps \ |
| | tr -d '\r' \ |
| | sed -e 1d -e 's/^[^ ]* *\([0-9]*\).* \([^ ]*\)$/\1 \2/' |
| fi |
| } |
| |
| function pid() |
| { |
| local prepend='' |
| local append='' |
| if [ "$1" = "--exact" ]; then |
| prepend=' ' |
| append='$' |
| shift |
| fi |
| local EXE="$1" |
| if [ "$EXE" ] ; then |
| local PID=`adb shell ps \ |
| | tr -d '\r' \ |
| | \grep "$prepend$EXE$append" \ |
| | sed -e 's/^[^ ]* *\([0-9]*\).*$/\1/'` |
| echo "$PID" |
| else |
| echo "usage: pid [--exact] <process name>" |
| return 255 |
| fi |
| } |
| |
| # coredump_setup - enable core dumps globally for any process |
| # that has the core-file-size limit set correctly |
| # |
| # NOTE: You must call also coredump_enable for a specific process |
| # if its core-file-size limit is not set already. |
| # NOTE: Core dumps are written to ramdisk; they will not survive a reboot! |
| |
| function coredump_setup() |
| { |
| echo "Getting root..."; |
| adb root; |
| adb wait-for-device; |
| |
| echo "Remounting root partition read-write..."; |
| adb shell mount -w -o remount -t rootfs rootfs; |
| sleep 1; |
| adb wait-for-device; |
| adb shell mkdir -p /cores; |
| adb shell mount -t tmpfs tmpfs /cores; |
| adb shell chmod 0777 /cores; |
| |
| echo "Granting SELinux permission to dump in /cores..."; |
| adb shell restorecon -R /cores; |
| |
| echo "Set core pattern."; |
| adb shell 'echo /cores/core.%p > /proc/sys/kernel/core_pattern'; |
| |
| echo "Done." |
| } |
| |
| # coredump_enable - enable core dumps for the specified process |
| # $1 = PID of process (e.g., $(pid mediaserver)) |
| # |
| # NOTE: coredump_setup must have been called as well for a core |
| # dump to actually be generated. |
| |
| function coredump_enable() |
| { |
| local PID=$1; |
| if [ -z "$PID" ]; then |
| printf "Expecting a PID!\n"; |
| return; |
| fi; |
| echo "Setting core limit for $PID to infinite..."; |
| adb shell /system/bin/ulimit -p $PID -c unlimited |
| } |
| |
| # core - send SIGV and pull the core for process |
| # $1 = PID of process (e.g., $(pid mediaserver)) |
| # |
| # NOTE: coredump_setup must be called once per boot for core dumps to be |
| # enabled globally. |
| |
| function core() |
| { |
| local PID=$1; |
| |
| if [ -z "$PID" ]; then |
| printf "Expecting a PID!\n"; |
| return; |
| fi; |
| |
| local CORENAME=core.$PID; |
| local COREPATH=/cores/$CORENAME; |
| local SIG=SEGV; |
| |
| coredump_enable $1; |
| |
| local done=0; |
| while [ $(adb shell "[ -d /proc/$PID ] && echo -n yes") ]; do |
| printf "\tSending SIG%s to %d...\n" $SIG $PID; |
| adb shell kill -$SIG $PID; |
| sleep 1; |
| done; |
| |
| adb shell "while [ ! -f $COREPATH ] ; do echo waiting for $COREPATH to be generated; sleep 1; done" |
| echo "Done: core is under $COREPATH on device."; |
| } |
| |
| # systemstack - dump the current stack trace of all threads in the system process |
| # to the usual ANR traces file |
| function systemstack() |
| { |
| stacks system_server |
| } |
| |
| function stacks() |
| { |
| if [[ $1 =~ ^[0-9]+$ ]] ; then |
| local PID="$1" |
| elif [ "$1" ] ; then |
| local PIDLIST="$(pid $1)" |
| if [[ $PIDLIST =~ ^[0-9]+$ ]] ; then |
| local PID="$PIDLIST" |
| elif [ "$PIDLIST" ] ; then |
| echo "more than one process: $1" |
| else |
| echo "no such process: $1" |
| fi |
| else |
| echo "usage: stacks [pid|process name]" |
| fi |
| |
| if [ "$PID" ] ; then |
| # Determine whether the process is native |
| if adb shell ls -l /proc/$PID/exe | grep -q /system/bin/app_process ; then |
| # Dump stacks of Dalvik process |
| local TRACES=/data/anr/traces.txt |
| local ORIG=/data/anr/traces.orig |
| local TMP=/data/anr/traces.tmp |
| |
| # Keep original traces to avoid clobbering |
| adb shell mv $TRACES $ORIG |
| |
| # Make sure we have a usable file |
| adb shell touch $TRACES |
| adb shell chmod 666 $TRACES |
| |
| # Dump stacks and wait for dump to finish |
| adb shell kill -3 $PID |
| adb shell notify $TRACES >/dev/null |
| |
| # Restore original stacks, and show current output |
| adb shell mv $TRACES $TMP |
| adb shell mv $ORIG $TRACES |
| adb shell cat $TMP |
| else |
| # Dump stacks of native process |
| local USE64BIT="$(is64bit $PID)" |
| adb shell debuggerd$USE64BIT -b $PID |
| fi |
| fi |
| } |
| |
| # Read the ELF header from /proc/$PID/exe to determine if the process is |
| # 64-bit. |
| function is64bit() |
| { |
| local PID="$1" |
| if [ "$PID" ] ; then |
| if [[ "$(adb shell cat /proc/$PID/exe | xxd -l 1 -s 4 -ps)" -eq "02" ]] ; then |
| echo "64" |
| else |
| echo "" |
| fi |
| else |
| echo "" |
| fi |
| } |
| |
| case `uname -s` in |
| Darwin) |
| function sgrep() |
| { |
| find -E . -name .repo -prune -o -name .git -prune -o -type f -iregex '.*\.(c|h|cc|cpp|S|java|xml|sh|mk|aidl)' \ |
| -exec grep --color -n "$@" {} + |
| } |
| |
| ;; |
| *) |
| function sgrep() |
| { |
| find . -name .repo -prune -o -name .git -prune -o -type f -iregex '.*\.\(c\|h\|cc\|cpp\|S\|java\|xml\|sh\|mk\|aidl\)' \ |
| -exec grep --color -n "$@" {} + |
| } |
| ;; |
| esac |
| |
| function gettargetarch |
| { |
| get_build_var TARGET_ARCH |
| } |
| |
| function ggrep() |
| { |
| find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -type f -name "*\.gradle" \ |
| -exec grep --color -n "$@" {} + |
| } |
| |
| function jgrep() |
| { |
| find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -type f -name "*\.java" \ |
| -exec grep --color -n "$@" {} + |
| } |
| |
| function cgrep() |
| { |
| find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -type f \( -name '*.c' -o -name '*.cc' -o -name '*.cpp' -o -name '*.h' -o -name '*.hpp' \) \ |
| -exec grep --color -n "$@" {} + |
| } |
| |
| function resgrep() |
| { |
| for dir in `find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -name res -type d`; do |
| find $dir -type f -name '*\.xml' -exec grep --color -n "$@" {} + |
| done |
| } |
| |
| function mangrep() |
| { |
| find . -name .repo -prune -o -name .git -prune -o -path ./out -prune -o -type f -name 'AndroidManifest.xml' \ |
| -exec grep --color -n "$@" {} + |
| } |
| |
| function sepgrep() |
| { |
| find . -name .repo -prune -o -name .git -prune -o -path ./out -prune -o -name sepolicy -type d \ |
| -exec grep --color -n -r --exclude-dir=\.git "$@" {} + |
| } |
| |
| function rcgrep() |
| { |
| find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -type f -name "*\.rc*" \ |
| -exec grep --color -n "$@" {} + |
| } |
| |
| case `uname -s` in |
| Darwin) |
| function mgrep() |
| { |
| find -E . -name .repo -prune -o -name .git -prune -o -path ./out -prune -o -type f -iregex '.*/(Makefile|Makefile\..*|.*\.make|.*\.mak|.*\.mk)' \ |
| -exec grep --color -n "$@" {} + |
| } |
| |
| function treegrep() |
| { |
| find -E . -name .repo -prune -o -name .git -prune -o -type f -iregex '.*\.(c|h|cpp|S|java|xml)' \ |
| -exec grep --color -n -i "$@" {} + |
| } |
| |
| ;; |
| *) |
| function mgrep() |
| { |
| find . -name .repo -prune -o -name .git -prune -o -path ./out -prune -o -regextype posix-egrep -iregex '(.*\/Makefile|.*\/Makefile\..*|.*\.make|.*\.mak|.*\.mk)' -type f \ |
| -exec grep --color -n "$@" {} + |
| } |
| |
| function treegrep() |
| { |
| find . -name .repo -prune -o -name .git -prune -o -regextype posix-egrep -iregex '.*\.(c|h|cpp|S|java|xml)' -type f \ |
| -exec grep --color -n -i "$@" {} + |
| } |
| |
| ;; |
| esac |
| |
| function getprebuilt |
| { |
| get_abs_build_var ANDROID_PREBUILTS |
| } |
| |
| function tracedmdump() |
| { |
| T=$(gettop) |
| if [ ! "$T" ]; then |
| echo "Couldn't locate the top of the tree. Try setting TOP." |
| return |
| fi |
| local prebuiltdir=$(getprebuilt) |
| local arch=$(gettargetarch) |
| local KERNEL=$T/prebuilts/qemu-kernel/$arch/vmlinux-qemu |
| |
| local TRACE=$1 |
| if [ ! "$TRACE" ] ; then |
| echo "usage: tracedmdump tracename" |
| return |
| fi |
| |
| if [ ! -r "$KERNEL" ] ; then |
| echo "Error: cannot find kernel: '$KERNEL'" |
| return |
| fi |
| |
| local BASETRACE=$(basename $TRACE) |
| if [ "$BASETRACE" = "$TRACE" ] ; then |
| TRACE=$ANDROID_PRODUCT_OUT/traces/$TRACE |
| fi |
| |
| echo "post-processing traces..." |
| rm -f $TRACE/qtrace.dexlist |
| post_trace $TRACE |
| if [ $? -ne 0 ]; then |
| echo "***" |
| echo "*** Error: malformed trace. Did you remember to exit the emulator?" |
| echo "***" |
| return |
| fi |
| echo "generating dexlist output..." |
| /bin/ls $ANDROID_PRODUCT_OUT/system/framework/*.jar $ANDROID_PRODUCT_OUT/system/app/*.apk $ANDROID_PRODUCT_OUT/data/app/*.apk 2>/dev/null | xargs dexlist > $TRACE/qtrace.dexlist |
| echo "generating dmtrace data..." |
| q2dm -r $ANDROID_PRODUCT_OUT/symbols $TRACE $KERNEL $TRACE/dmtrace || return |
| echo "generating html file..." |
| dmtracedump -h $TRACE/dmtrace >| $TRACE/dmtrace.html || return |
| echo "done, see $TRACE/dmtrace.html for details" |
| echo "or run:" |
| echo " traceview $TRACE/dmtrace" |
| } |
| |
| # communicate with a running device or emulator, set up necessary state, |
| # and run the hat command. |
| function runhat() |
| { |
| # process standard adb options |
| local adbTarget="" |
| if [ "$1" = "-d" -o "$1" = "-e" ]; then |
| adbTarget=$1 |
| shift 1 |
| elif [ "$1" = "-s" ]; then |
| adbTarget="$1 $2" |
| shift 2 |
| fi |
| local adbOptions=${adbTarget} |
| #echo adbOptions = ${adbOptions} |
| |
| # runhat options |
| local targetPid=$1 |
| |
| if [ "$targetPid" = "" ]; then |
| echo "Usage: runhat [ -d | -e | -s serial ] target-pid" |
| return |
| fi |
| |
| # confirm hat is available |
| if [ -z $(which hat) ]; then |
| echo "hat is not available in this configuration." |
| return |
| fi |
| |
| # issue "am" command to cause the hprof dump |
| local devFile=/data/local/tmp/hprof-$targetPid |
| echo "Poking $targetPid and waiting for data..." |
| echo "Storing data at $devFile" |
| adb ${adbOptions} shell am dumpheap $targetPid $devFile |
| echo "Press enter when logcat shows \"hprof: heap dump completed\"" |
| echo -n "> " |
| read |
| |
| local localFile=/tmp/$$-hprof |
| |
| echo "Retrieving file $devFile..." |
| adb ${adbOptions} pull $devFile $localFile |
| |
| adb ${adbOptions} shell rm $devFile |
| |
| echo "Running hat on $localFile" |
| echo "View the output by pointing your browser at http://localhost:7000/" |
| echo "" |
| hat -JXmx512m $localFile |
| } |
| |
| function getbugreports() |
| { |
| local reports=(`adb shell ls /sdcard/bugreports | tr -d '\r'`) |
| |
| if [ ! "$reports" ]; then |
| echo "Could not locate any bugreports." |
| return |
| fi |
| |
| local report |
| for report in ${reports[@]} |
| do |
| echo "/sdcard/bugreports/${report}" |
| adb pull /sdcard/bugreports/${report} ${report} |
| gunzip ${report} |
| done |
| } |
| |
| function getsdcardpath() |
| { |
| adb ${adbOptions} shell echo -n \$\{EXTERNAL_STORAGE\} |
| } |
| |
| function getscreenshotpath() |
| { |
| echo "$(getsdcardpath)/Pictures/Screenshots" |
| } |
| |
| function getlastscreenshot() |
| { |
| local screenshot_path=$(getscreenshotpath) |
| local screenshot=`adb ${adbOptions} ls ${screenshot_path} | grep Screenshot_[0-9-]*.*\.png | sort -rk 3 | cut -d " " -f 4 | head -n 1` |
| if [ "$screenshot" = "" ]; then |
| echo "No screenshots found." |
| return |
| fi |
| echo "${screenshot}" |
| adb ${adbOptions} pull ${screenshot_path}/${screenshot} |
| } |
| |
| function startviewserver() |
| { |
| local port=4939 |
| if [ $# -gt 0 ]; then |
| port=$1 |
| fi |
| adb shell service call window 1 i32 $port |
| } |
| |
| function stopviewserver() |
| { |
| adb shell service call window 2 |
| } |
| |
| function isviewserverstarted() |
| { |
| adb shell service call window 3 |
| } |
| |
| function key_home() |
| { |
| adb shell input keyevent 3 |
| } |
| |
| function key_back() |
| { |
| adb shell input keyevent 4 |
| } |
| |
| function key_menu() |
| { |
| adb shell input keyevent 82 |
| } |
| |
| function smoketest() |
| { |
| if [ ! "$ANDROID_PRODUCT_OUT" ]; then |
| echo "Couldn't locate output files. Try running 'lunch' first." >&2 |
| return |
| fi |
| T=$(gettop) |
| if [ ! "$T" ]; then |
| echo "Couldn't locate the top of the tree. Try setting TOP." >&2 |
| return |
| fi |
| |
| (\cd "$T" && mmm tests/SmokeTest) && |
| adb uninstall com.android.smoketest > /dev/null && |
| adb uninstall com.android.smoketest.tests > /dev/null && |
| adb install $ANDROID_PRODUCT_OUT/data/app/SmokeTestApp.apk && |
| adb install $ANDROID_PRODUCT_OUT/data/app/SmokeTest.apk && |
| adb shell am instrument -w com.android.smoketest.tests/android.test.InstrumentationTestRunner |
| } |
| |
| # simple shortcut to the runtest command |
| function runtest() |
| { |
| T=$(gettop) |
| if [ ! "$T" ]; then |
| echo "Couldn't locate the top of the tree. Try setting TOP." >&2 |
| return |
| fi |
| ("$T"/development/testrunner/runtest.py $@) |
| } |
| |
| function godir () { |
| if [[ -z "$1" ]]; then |
| echo "Usage: godir <regex>" |
| return |
| fi |
| T=$(gettop) |
| if [ ! "$OUT_DIR" = "" ]; then |
| mkdir -p $OUT_DIR |
| FILELIST=$OUT_DIR/filelist |
| else |
| FILELIST=$T/filelist |
| fi |
| if [[ ! -f $FILELIST ]]; then |
| echo -n "Creating index..." |
| (\cd $T; find . -wholename ./out -prune -o -wholename ./.repo -prune -o -type f > $FILELIST) |
| echo " Done" |
| echo "" |
| fi |
| local lines |
| lines=($(\grep "$1" $FILELIST | sed -e 's/\/[^/]*$//' | sort | uniq)) |
| if [[ ${#lines[@]} = 0 ]]; then |
| echo "Not found" |
| return |
| fi |
| local pathname |
| local choice |
| if [[ ${#lines[@]} > 1 ]]; then |
| while [[ -z "$pathname" ]]; do |
| local index=1 |
| local line |
| for line in ${lines[@]}; do |
| printf "%6s %s\n" "[$index]" $line |
| index=$(($index + 1)) |
| done |
| echo |
| echo -n "Select one: " |
| unset choice |
| read choice |
| if [[ $choice -gt ${#lines[@]} || $choice -lt 1 ]]; then |
| echo "Invalid choice" |
| continue |
| fi |
| pathname=${lines[$(($choice-1))]} |
| done |
| else |
| pathname=${lines[0]} |
| fi |
| \cd $T/$pathname |
| } |
| |
| # Force JAVA_HOME to point to java 1.7/1.8 if it isn't already set. |
| function set_java_home() { |
| # Clear the existing JAVA_HOME value if we set it ourselves, so that |
| # we can reset it later, depending on the version of java the build |
| # system needs. |
| # |
| # If we don't do this, the JAVA_HOME value set by the first call to |
| # build/envsetup.sh will persist forever. |
| if [ -n "$ANDROID_SET_JAVA_HOME" ]; then |
| export JAVA_HOME="" |
| fi |
| |
| if [ ! "$JAVA_HOME" ]; then |
| if [ -n "$LEGACY_USE_JAVA7" ]; then |
| echo Warning: Support for JDK 7 will be dropped. Switch to JDK 8. |
| case `uname -s` in |
| Darwin) |
| export JAVA_HOME=$(/usr/libexec/java_home -v 1.7) |
| ;; |
| *) |
| export JAVA_HOME=/usr/lib/jvm/java-7-openjdk-amd64 |
| ;; |
| esac |
| else |
| case `uname -s` in |
| Darwin) |
| export JAVA_HOME=$(/usr/libexec/java_home -v 1.8) |
| ;; |
| *) |
| export JAVA_HOME=/usr/lib/jvm/java-8-openjdk-amd64 |
| ;; |
| esac |
| fi |
| |
| # Keep track of the fact that we set JAVA_HOME ourselves, so that |
| # we can change it on the next envsetup.sh, if required. |
| export ANDROID_SET_JAVA_HOME=true |
| fi |
| } |
| |
| # Print colored exit condition |
| function pez { |
| "$@" |
| local retval=$? |
| if [ $retval -ne 0 ] |
| then |
| echo $'\E'"[0;31mFAILURE\e[00m" |
| else |
| echo $'\E'"[0;32mSUCCESS\e[00m" |
| fi |
| return $retval |
| } |
| |
| function get_make_command() |
| { |
| echo command make |
| } |
| |
| function make() |
| { |
| local start_time=$(date +"%s") |
| $(get_make_command) "$@" |
| local ret=$? |
| local end_time=$(date +"%s") |
| local tdiff=$(($end_time-$start_time)) |
| local hours=$(($tdiff / 3600 )) |
| local mins=$((($tdiff % 3600) / 60)) |
| local secs=$(($tdiff % 60)) |
| local ncolors=$(tput colors 2>/dev/null) |
| if [ -n "$ncolors" ] && [ $ncolors -ge 8 ]; then |
| color_failed=$'\E'"[0;31m" |
| color_success=$'\E'"[0;32m" |
| color_reset=$'\E'"[00m" |
| else |
| color_failed="" |
| color_success="" |
| color_reset="" |
| fi |
| echo |
| if [ $ret -eq 0 ] ; then |
| echo -n "${color_success}#### make completed successfully " |
| else |
| echo -n "${color_failed}#### make failed to build some targets " |
| fi |
| if [ $hours -gt 0 ] ; then |
| printf "(%02g:%02g:%02g (hh:mm:ss))" $hours $mins $secs |
| elif [ $mins -gt 0 ] ; then |
| printf "(%02g:%02g (mm:ss))" $mins $secs |
| elif [ $secs -gt 0 ] ; then |
| printf "(%s seconds)" $secs |
| fi |
| echo " ####${color_reset}" |
| echo |
| return $ret |
| } |
| |
| function provision() |
| { |
| if [ ! "$ANDROID_PRODUCT_OUT" ]; then |
| echo "Couldn't locate output files. Try running 'lunch' first." >&2 |
| return 1 |
| fi |
| if [ ! -e "$ANDROID_PRODUCT_OUT/provision-device" ]; then |
| echo "There is no provisioning script for the device." >&2 |
| return 1 |
| fi |
| |
| # Check if user really wants to do this. |
| if [ "$1" = "--no-confirmation" ]; then |
| shift 1 |
| else |
| echo "This action will reflash your device." |
| echo "" |
| echo "ALL DATA ON THE DEVICE WILL BE IRREVOCABLY ERASED." |
| echo "" |
| echo -n "Are you sure you want to do this (yes/no)? " |
| read |
| if [[ "${REPLY}" != "yes" ]] ; then |
| echo "Not taking any action. Exiting." >&2 |
| return 1 |
| fi |
| fi |
| "$ANDROID_PRODUCT_OUT/provision-device" "$@" |
| } |
| |
| if [ "x$SHELL" != "x/bin/bash" ]; then |
| case `ps -o command -p $$` in |
| *bash*) |
| ;; |
| *) |
| echo "WARNING: Only bash is supported, use of other shell would lead to erroneous results" |
| ;; |
| esac |
| fi |
| |
| # Execute the contents of any vendorsetup.sh files we can find. |
| for f in `test -d device && find -L device -maxdepth 4 -name 'vendorsetup.sh' 2> /dev/null | sort` \ |
| `test -d vendor && find -L vendor -maxdepth 4 -name 'vendorsetup.sh' 2> /dev/null | sort` \ |
| `test -d product && find -L product -maxdepth 4 -name 'vendorsetup.sh' 2> /dev/null | sort` |
| do |
| echo "including $f" |
| . $f |
| done |
| unset f |
| |
| addcompletions |