blob: 2d20e23fd9188bd9d31523fa24b675bc8e2ab5a0 [file] [log] [blame]
# Copyright (C) 2014 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
from __future__ import print_function
import array
import copy
import functools
import heapq
import itertools
import logging
import multiprocessing
import os
import os.path
import re
import sys
import threading
from collections import deque, OrderedDict
from hashlib import sha1
import common
from rangelib import RangeSet
__all__ = ["EmptyImage", "DataImage", "BlockImageDiff"]
logger = logging.getLogger(__name__)
def compute_patch(srcfile, tgtfile, imgdiff=False):
patchfile = common.MakeTempFile(prefix='patch-')
cmd = ['imgdiff', '-z'] if imgdiff else ['bsdiff']
cmd.extend([srcfile, tgtfile, patchfile])
# Don't dump the bsdiff/imgdiff commands, which are not useful for the case
# here, since they contain temp filenames only.
proc = common.Run(cmd, verbose=False)
output, _ = proc.communicate()
if proc.returncode != 0:
raise ValueError(output)
with open(patchfile, 'rb') as f:
return f.read()
class Image(object):
def RangeSha1(self, ranges):
raise NotImplementedError
def ReadRangeSet(self, ranges):
raise NotImplementedError
def TotalSha1(self, include_clobbered_blocks=False):
raise NotImplementedError
def WriteRangeDataToFd(self, ranges, fd):
raise NotImplementedError
class EmptyImage(Image):
"""A zero-length image."""
def __init__(self):
self.blocksize = 4096
self.care_map = RangeSet()
self.clobbered_blocks = RangeSet()
self.extended = RangeSet()
self.total_blocks = 0
self.file_map = {}
def RangeSha1(self, ranges):
return sha1().hexdigest()
def ReadRangeSet(self, ranges):
return ()
def TotalSha1(self, include_clobbered_blocks=False):
# EmptyImage always carries empty clobbered_blocks, so
# include_clobbered_blocks can be ignored.
assert self.clobbered_blocks.size() == 0
return sha1().hexdigest()
def WriteRangeDataToFd(self, ranges, fd):
raise ValueError("Can't write data from EmptyImage to file")
class DataImage(Image):
"""An image wrapped around a single string of data."""
def __init__(self, data, trim=False, pad=False):
self.data = data
self.blocksize = 4096
assert not (trim and pad)
partial = len(self.data) % self.blocksize
padded = False
if partial > 0:
if trim:
self.data = self.data[:-partial]
elif pad:
self.data += '\0' * (self.blocksize - partial)
padded = True
else:
raise ValueError(("data for DataImage must be multiple of %d bytes "
"unless trim or pad is specified") %
(self.blocksize,))
assert len(self.data) % self.blocksize == 0
self.total_blocks = len(self.data) / self.blocksize
self.care_map = RangeSet(data=(0, self.total_blocks))
# When the last block is padded, we always write the whole block even for
# incremental OTAs. Because otherwise the last block may get skipped if
# unchanged for an incremental, but would fail the post-install
# verification if it has non-zero contents in the padding bytes.
# Bug: 23828506
if padded:
clobbered_blocks = [self.total_blocks-1, self.total_blocks]
else:
clobbered_blocks = []
self.clobbered_blocks = clobbered_blocks
self.extended = RangeSet()
zero_blocks = []
nonzero_blocks = []
reference = '\0' * self.blocksize
for i in range(self.total_blocks-1 if padded else self.total_blocks):
d = self.data[i*self.blocksize : (i+1)*self.blocksize]
if d == reference:
zero_blocks.append(i)
zero_blocks.append(i+1)
else:
nonzero_blocks.append(i)
nonzero_blocks.append(i+1)
assert zero_blocks or nonzero_blocks or clobbered_blocks
self.file_map = dict()
if zero_blocks:
self.file_map["__ZERO"] = RangeSet(data=zero_blocks)
if nonzero_blocks:
self.file_map["__NONZERO"] = RangeSet(data=nonzero_blocks)
if clobbered_blocks:
self.file_map["__COPY"] = RangeSet(data=clobbered_blocks)
def _GetRangeData(self, ranges):
for s, e in ranges:
yield self.data[s*self.blocksize:e*self.blocksize]
def RangeSha1(self, ranges):
h = sha1()
for data in self._GetRangeData(ranges): # pylint: disable=not-an-iterable
h.update(data)
return h.hexdigest()
def ReadRangeSet(self, ranges):
return [self._GetRangeData(ranges)]
def TotalSha1(self, include_clobbered_blocks=False):
if not include_clobbered_blocks:
return self.RangeSha1(self.care_map.subtract(self.clobbered_blocks))
else:
return sha1(self.data).hexdigest()
def WriteRangeDataToFd(self, ranges, fd):
for data in self._GetRangeData(ranges): # pylint: disable=not-an-iterable
fd.write(data)
class Transfer(object):
def __init__(self, tgt_name, src_name, tgt_ranges, src_ranges, tgt_sha1,
src_sha1, style, by_id):
self.tgt_name = tgt_name
self.src_name = src_name
self.tgt_ranges = tgt_ranges
self.src_ranges = src_ranges
self.tgt_sha1 = tgt_sha1
self.src_sha1 = src_sha1
self.style = style
# We use OrderedDict rather than dict so that the output is repeatable;
# otherwise it would depend on the hash values of the Transfer objects.
self.goes_before = OrderedDict()
self.goes_after = OrderedDict()
self.stash_before = []
self.use_stash = []
self.id = len(by_id)
by_id.append(self)
self._patch = None
@property
def patch(self):
return self._patch
@patch.setter
def patch(self, patch):
if patch:
assert self.style == "diff"
self._patch = patch
def NetStashChange(self):
return (sum(sr.size() for (_, sr) in self.stash_before) -
sum(sr.size() for (_, sr) in self.use_stash))
def ConvertToNew(self):
assert self.style != "new"
self.use_stash = []
self.style = "new"
self.src_ranges = RangeSet()
self.patch = None
def __str__(self):
return (str(self.id) + ": <" + str(self.src_ranges) + " " + self.style +
" to " + str(self.tgt_ranges) + ">")
@functools.total_ordering
class HeapItem(object):
def __init__(self, item):
self.item = item
# Negate the score since python's heap is a min-heap and we want the
# maximum score.
self.score = -item.score
def clear(self):
self.item = None
def __bool__(self):
return self.item is not None
# Python 2 uses __nonzero__, while Python 3 uses __bool__.
__nonzero__ = __bool__
# The rest operations are generated by functools.total_ordering decorator.
def __eq__(self, other):
return self.score == other.score
def __le__(self, other):
return self.score <= other.score
class ImgdiffStats(object):
"""A class that collects imgdiff stats.
It keeps track of the files that will be applied imgdiff while generating
BlockImageDiff. It also logs the ones that cannot use imgdiff, with specific
reasons. The stats is only meaningful when imgdiff not being disabled by the
caller of BlockImageDiff. In addition, only files with supported types
(BlockImageDiff.FileTypeSupportedByImgdiff()) are allowed to be logged.
"""
USED_IMGDIFF = "APK files diff'd with imgdiff"
USED_IMGDIFF_LARGE_APK = "Large APK files split and diff'd with imgdiff"
# Reasons for not applying imgdiff on APKs.
SKIPPED_NONMONOTONIC = "Not used imgdiff due to having non-monotonic ranges"
SKIPPED_SHARED_BLOCKS = "Not used imgdiff due to using shared blocks"
SKIPPED_INCOMPLETE = "Not used imgdiff due to incomplete RangeSet"
# The list of valid reasons, which will also be the dumped order in a report.
REASONS = (
USED_IMGDIFF,
USED_IMGDIFF_LARGE_APK,
SKIPPED_NONMONOTONIC,
SKIPPED_SHARED_BLOCKS,
SKIPPED_INCOMPLETE,
)
def __init__(self):
self.stats = {}
def Log(self, filename, reason):
"""Logs why imgdiff can or cannot be applied to the given filename.
Args:
filename: The filename string.
reason: One of the reason constants listed in REASONS.
Raises:
AssertionError: On unsupported filetypes or invalid reason.
"""
assert BlockImageDiff.FileTypeSupportedByImgdiff(filename)
assert reason in self.REASONS
if reason not in self.stats:
self.stats[reason] = set()
self.stats[reason].add(filename)
def Report(self):
"""Prints a report of the collected imgdiff stats."""
def print_header(header, separator):
logger.info(header)
logger.info(separator * len(header) + '\n')
print_header(' Imgdiff Stats Report ', '=')
for key in self.REASONS:
if key not in self.stats:
continue
values = self.stats[key]
section_header = ' {} (count: {}) '.format(key, len(values))
print_header(section_header, '-')
logger.info(''.join([' {}\n'.format(name) for name in values]))
class BlockImageDiff(object):
"""Generates the diff of two block image objects.
BlockImageDiff works on two image objects. An image object is anything that
provides the following attributes:
blocksize: the size in bytes of a block, currently must be 4096.
total_blocks: the total size of the partition/image, in blocks.
care_map: a RangeSet containing which blocks (in the range [0,
total_blocks) we actually care about; i.e. which blocks contain data.
file_map: a dict that partitions the blocks contained in care_map into
smaller domains that are useful for doing diffs on. (Typically a domain
is a file, and the key in file_map is the pathname.)
clobbered_blocks: a RangeSet containing which blocks contain data but may
be altered by the FS. They need to be excluded when verifying the
partition integrity.
ReadRangeSet(): a function that takes a RangeSet and returns the data
contained in the image blocks of that RangeSet. The data is returned as
a list or tuple of strings; concatenating the elements together should
produce the requested data. Implementations are free to break up the
data into list/tuple elements in any way that is convenient.
RangeSha1(): a function that returns (as a hex string) the SHA-1 hash of
all the data in the specified range.
TotalSha1(): a function that returns (as a hex string) the SHA-1 hash of
all the data in the image (ie, all the blocks in the care_map minus
clobbered_blocks, or including the clobbered blocks if
include_clobbered_blocks is True).
When creating a BlockImageDiff, the src image may be None, in which case the
list of transfers produced will never read from the original image.
"""
def __init__(self, tgt, src=None, threads=None, version=4,
disable_imgdiff=False):
if threads is None:
threads = multiprocessing.cpu_count() // 2
if threads == 0:
threads = 1
self.threads = threads
self.version = version
self.transfers = []
self.src_basenames = {}
self.src_numpatterns = {}
self._max_stashed_size = 0
self.touched_src_ranges = RangeSet()
self.touched_src_sha1 = None
self.disable_imgdiff = disable_imgdiff
self.imgdiff_stats = ImgdiffStats() if not disable_imgdiff else None
assert version in (3, 4)
self.tgt = tgt
if src is None:
src = EmptyImage()
self.src = src
# The updater code that installs the patch always uses 4k blocks.
assert tgt.blocksize == 4096
assert src.blocksize == 4096
# The range sets in each filemap should comprise a partition of
# the care map.
self.AssertPartition(src.care_map, src.file_map.values())
self.AssertPartition(tgt.care_map, tgt.file_map.values())
@property
def max_stashed_size(self):
return self._max_stashed_size
@staticmethod
def FileTypeSupportedByImgdiff(filename):
"""Returns whether the file type is supported by imgdiff."""
return filename.lower().endswith(('.apk', '.jar', '.zip'))
def CanUseImgdiff(self, name, tgt_ranges, src_ranges, large_apk=False):
"""Checks whether we can apply imgdiff for the given RangeSets.
For files in ZIP format (e.g., APKs, JARs, etc.) we would like to use
'imgdiff -z' if possible. Because it usually produces significantly smaller
patches than bsdiff.
This is permissible if all of the following conditions hold.
- The imgdiff hasn't been disabled by the caller (e.g. squashfs);
- The file type is supported by imgdiff;
- The source and target blocks are monotonic (i.e. the data is stored with
blocks in increasing order);
- Both files don't contain shared blocks;
- Both files have complete lists of blocks;
- We haven't removed any blocks from the source set.
If all these conditions are satisfied, concatenating all the blocks in the
RangeSet in order will produce a valid ZIP file (plus possibly extra zeros
in the last block). imgdiff is fine with extra zeros at the end of the file.
Args:
name: The filename to be diff'd.
tgt_ranges: The target RangeSet.
src_ranges: The source RangeSet.
large_apk: Whether this is to split a large APK.
Returns:
A boolean result.
"""
if self.disable_imgdiff or not self.FileTypeSupportedByImgdiff(name):
return False
if not tgt_ranges.monotonic or not src_ranges.monotonic:
self.imgdiff_stats.Log(name, ImgdiffStats.SKIPPED_NONMONOTONIC)
return False
if (tgt_ranges.extra.get('uses_shared_blocks') or
src_ranges.extra.get('uses_shared_blocks')):
self.imgdiff_stats.Log(name, ImgdiffStats.SKIPPED_SHARED_BLOCKS)
return False
if tgt_ranges.extra.get('incomplete') or src_ranges.extra.get('incomplete'):
self.imgdiff_stats.Log(name, ImgdiffStats.SKIPPED_INCOMPLETE)
return False
reason = (ImgdiffStats.USED_IMGDIFF_LARGE_APK if large_apk
else ImgdiffStats.USED_IMGDIFF)
self.imgdiff_stats.Log(name, reason)
return True
def Compute(self, prefix):
# When looking for a source file to use as the diff input for a
# target file, we try:
# 1) an exact path match if available, otherwise
# 2) a exact basename match if available, otherwise
# 3) a basename match after all runs of digits are replaced by
# "#" if available, otherwise
# 4) we have no source for this target.
self.AbbreviateSourceNames()
self.FindTransfers()
# Find the ordering dependencies among transfers (this is O(n^2)
# in the number of transfers).
self.GenerateDigraph()
# Find a sequence of transfers that satisfies as many ordering
# dependencies as possible (heuristically).
self.FindVertexSequence()
# Fix up the ordering dependencies that the sequence didn't
# satisfy.
self.ReverseBackwardEdges()
self.ImproveVertexSequence()
# Ensure the runtime stash size is under the limit.
if common.OPTIONS.cache_size is not None:
self.ReviseStashSize()
# Double-check our work.
self.AssertSequenceGood()
self.AssertSha1Good()
self.ComputePatches(prefix)
self.WriteTransfers(prefix)
# Report the imgdiff stats.
if not self.disable_imgdiff:
self.imgdiff_stats.Report()
def WriteTransfers(self, prefix):
def WriteSplitTransfers(out, style, target_blocks):
"""Limit the size of operand in command 'new' and 'zero' to 1024 blocks.
This prevents the target size of one command from being too large; and
might help to avoid fsync errors on some devices."""
assert style == "new" or style == "zero"
blocks_limit = 1024
total = 0
while target_blocks:
blocks_to_write = target_blocks.first(blocks_limit)
out.append("%s %s\n" % (style, blocks_to_write.to_string_raw()))
total += blocks_to_write.size()
target_blocks = target_blocks.subtract(blocks_to_write)
return total
out = []
total = 0
# In BBOTA v3+, it uses the hash of the stashed blocks as the stash slot
# id. 'stashes' records the map from 'hash' to the ref count. The stash
# will be freed only if the count decrements to zero.
stashes = {}
stashed_blocks = 0
max_stashed_blocks = 0
for xf in self.transfers:
for _, sr in xf.stash_before:
sh = self.src.RangeSha1(sr)
if sh in stashes:
stashes[sh] += 1
else:
stashes[sh] = 1
stashed_blocks += sr.size()
self.touched_src_ranges = self.touched_src_ranges.union(sr)
out.append("stash %s %s\n" % (sh, sr.to_string_raw()))
if stashed_blocks > max_stashed_blocks:
max_stashed_blocks = stashed_blocks
free_string = []
free_size = 0
# <# blocks> <src ranges>
# OR
# <# blocks> <src ranges> <src locs> <stash refs...>
# OR
# <# blocks> - <stash refs...>
size = xf.src_ranges.size()
src_str_buffer = [str(size)]
unstashed_src_ranges = xf.src_ranges
mapped_stashes = []
for _, sr in xf.use_stash:
unstashed_src_ranges = unstashed_src_ranges.subtract(sr)
sh = self.src.RangeSha1(sr)
sr = xf.src_ranges.map_within(sr)
mapped_stashes.append(sr)
assert sh in stashes
src_str_buffer.append("%s:%s" % (sh, sr.to_string_raw()))
stashes[sh] -= 1
if stashes[sh] == 0:
free_string.append("free %s\n" % (sh,))
free_size += sr.size()
stashes.pop(sh)
if unstashed_src_ranges:
src_str_buffer.insert(1, unstashed_src_ranges.to_string_raw())
if xf.use_stash:
mapped_unstashed = xf.src_ranges.map_within(unstashed_src_ranges)
src_str_buffer.insert(2, mapped_unstashed.to_string_raw())
mapped_stashes.append(mapped_unstashed)
self.AssertPartition(RangeSet(data=(0, size)), mapped_stashes)
else:
src_str_buffer.insert(1, "-")
self.AssertPartition(RangeSet(data=(0, size)), mapped_stashes)
src_str = " ".join(src_str_buffer)
# version 3+:
# zero <rangeset>
# new <rangeset>
# erase <rangeset>
# bsdiff patchstart patchlen srchash tgthash <tgt rangeset> <src_str>
# imgdiff patchstart patchlen srchash tgthash <tgt rangeset> <src_str>
# move hash <tgt rangeset> <src_str>
tgt_size = xf.tgt_ranges.size()
if xf.style == "new":
assert xf.tgt_ranges
assert tgt_size == WriteSplitTransfers(out, xf.style, xf.tgt_ranges)
total += tgt_size
elif xf.style == "move":
assert xf.tgt_ranges
assert xf.src_ranges.size() == tgt_size
if xf.src_ranges != xf.tgt_ranges:
# take into account automatic stashing of overlapping blocks
if xf.src_ranges.overlaps(xf.tgt_ranges):
temp_stash_usage = stashed_blocks + xf.src_ranges.size()
if temp_stash_usage > max_stashed_blocks:
max_stashed_blocks = temp_stash_usage
self.touched_src_ranges = self.touched_src_ranges.union(
xf.src_ranges)
out.append("%s %s %s %s\n" % (
xf.style,
xf.tgt_sha1,
xf.tgt_ranges.to_string_raw(), src_str))
total += tgt_size
elif xf.style in ("bsdiff", "imgdiff"):
assert xf.tgt_ranges
assert xf.src_ranges
# take into account automatic stashing of overlapping blocks
if xf.src_ranges.overlaps(xf.tgt_ranges):
temp_stash_usage = stashed_blocks + xf.src_ranges.size()
if temp_stash_usage > max_stashed_blocks:
max_stashed_blocks = temp_stash_usage
self.touched_src_ranges = self.touched_src_ranges.union(xf.src_ranges)
out.append("%s %d %d %s %s %s %s\n" % (
xf.style,
xf.patch_start, xf.patch_len,
xf.src_sha1,
xf.tgt_sha1,
xf.tgt_ranges.to_string_raw(), src_str))
total += tgt_size
elif xf.style == "zero":
assert xf.tgt_ranges
to_zero = xf.tgt_ranges.subtract(xf.src_ranges)
assert WriteSplitTransfers(out, xf.style, to_zero) == to_zero.size()
total += to_zero.size()
else:
raise ValueError("unknown transfer style '%s'\n" % xf.style)
if free_string:
out.append("".join(free_string))
stashed_blocks -= free_size
if common.OPTIONS.cache_size is not None:
# Sanity check: abort if we're going to need more stash space than
# the allowed size (cache_size * threshold). There are two purposes
# of having a threshold here. a) Part of the cache may have been
# occupied by some recovery logs. b) It will buy us some time to deal
# with the oversize issue.
cache_size = common.OPTIONS.cache_size
stash_threshold = common.OPTIONS.stash_threshold
max_allowed = cache_size * stash_threshold
assert max_stashed_blocks * self.tgt.blocksize <= max_allowed, \
'Stash size %d (%d * %d) exceeds the limit %d (%d * %.2f)' % (
max_stashed_blocks * self.tgt.blocksize, max_stashed_blocks,
self.tgt.blocksize, max_allowed, cache_size,
stash_threshold)
self.touched_src_sha1 = self.src.RangeSha1(self.touched_src_ranges)
if self.tgt.hashtree_info:
out.append("compute_hash_tree {} {} {} {} {}\n".format(
self.tgt.hashtree_info.hashtree_range.to_string_raw(),
self.tgt.hashtree_info.filesystem_range.to_string_raw(),
self.tgt.hashtree_info.hash_algorithm,
self.tgt.hashtree_info.salt,
self.tgt.hashtree_info.root_hash))
# Zero out extended blocks as a workaround for bug 20881595.
if self.tgt.extended:
assert (WriteSplitTransfers(out, "zero", self.tgt.extended) ==
self.tgt.extended.size())
total += self.tgt.extended.size()
# We erase all the blocks on the partition that a) don't contain useful
# data in the new image; b) will not be touched by dm-verity. Out of those
# blocks, we erase the ones that won't be used in this update at the
# beginning of an update. The rest would be erased at the end. This is to
# work around the eMMC issue observed on some devices, which may otherwise
# get starving for clean blocks and thus fail the update. (b/28347095)
all_tgt = RangeSet(data=(0, self.tgt.total_blocks))
all_tgt_minus_extended = all_tgt.subtract(self.tgt.extended)
new_dontcare = all_tgt_minus_extended.subtract(self.tgt.care_map)
erase_first = new_dontcare.subtract(self.touched_src_ranges)
if erase_first:
out.insert(0, "erase %s\n" % (erase_first.to_string_raw(),))
erase_last = new_dontcare.subtract(erase_first)
if erase_last:
out.append("erase %s\n" % (erase_last.to_string_raw(),))
out.insert(0, "%d\n" % (self.version,)) # format version number
out.insert(1, "%d\n" % (total,))
# v3+: the number of stash slots is unused.
out.insert(2, "0\n")
out.insert(3, str(max_stashed_blocks) + "\n")
with open(prefix + ".transfer.list", "wb") as f:
for i in out:
f.write(i)
self._max_stashed_size = max_stashed_blocks * self.tgt.blocksize
OPTIONS = common.OPTIONS
if OPTIONS.cache_size is not None:
max_allowed = OPTIONS.cache_size * OPTIONS.stash_threshold
logger.info(
"max stashed blocks: %d (%d bytes), limit: %d bytes (%.2f%%)\n",
max_stashed_blocks, self._max_stashed_size, max_allowed,
self._max_stashed_size * 100.0 / max_allowed)
else:
logger.info(
"max stashed blocks: %d (%d bytes), limit: <unknown>\n",
max_stashed_blocks, self._max_stashed_size)
def ReviseStashSize(self):
logger.info("Revising stash size...")
stash_map = {}
# Create the map between a stash and its def/use points. For example, for a
# given stash of (raw_id, sr), stash_map[raw_id] = (sr, def_cmd, use_cmd).
for xf in self.transfers:
# Command xf defines (stores) all the stashes in stash_before.
for stash_raw_id, sr in xf.stash_before:
stash_map[stash_raw_id] = (sr, xf)
# Record all the stashes command xf uses.
for stash_raw_id, _ in xf.use_stash:
stash_map[stash_raw_id] += (xf,)
# Compute the maximum blocks available for stash based on /cache size and
# the threshold.
cache_size = common.OPTIONS.cache_size
stash_threshold = common.OPTIONS.stash_threshold
max_allowed = cache_size * stash_threshold / self.tgt.blocksize
# See the comments for 'stashes' in WriteTransfers().
stashes = {}
stashed_blocks = 0
new_blocks = 0
# Now go through all the commands. Compute the required stash size on the
# fly. If a command requires excess stash than available, it deletes the
# stash by replacing the command that uses the stash with a "new" command
# instead.
for xf in self.transfers:
replaced_cmds = []
# xf.stash_before generates explicit stash commands.
for stash_raw_id, sr in xf.stash_before:
# Check the post-command stashed_blocks.
stashed_blocks_after = stashed_blocks
sh = self.src.RangeSha1(sr)
if sh not in stashes:
stashed_blocks_after += sr.size()
if stashed_blocks_after > max_allowed:
# We cannot stash this one for a later command. Find out the command
# that will use this stash and replace the command with "new".
use_cmd = stash_map[stash_raw_id][2]
replaced_cmds.append(use_cmd)
logger.info("%10d %9s %s", sr.size(), "explicit", use_cmd)
else:
# Update the stashes map.
if sh in stashes:
stashes[sh] += 1
else:
stashes[sh] = 1
stashed_blocks = stashed_blocks_after
# "move" and "diff" may introduce implicit stashes in BBOTA v3. Prior to
# ComputePatches(), they both have the style of "diff".
if xf.style == "diff":
assert xf.tgt_ranges and xf.src_ranges
if xf.src_ranges.overlaps(xf.tgt_ranges):
if stashed_blocks + xf.src_ranges.size() > max_allowed:
replaced_cmds.append(xf)
logger.info("%10d %9s %s", xf.src_ranges.size(), "implicit", xf)
# Replace the commands in replaced_cmds with "new"s.
for cmd in replaced_cmds:
# It no longer uses any commands in "use_stash". Remove the def points
# for all those stashes.
for stash_raw_id, sr in cmd.use_stash:
def_cmd = stash_map[stash_raw_id][1]
assert (stash_raw_id, sr) in def_cmd.stash_before
def_cmd.stash_before.remove((stash_raw_id, sr))
# Add up blocks that violates space limit and print total number to
# screen later.
new_blocks += cmd.tgt_ranges.size()
cmd.ConvertToNew()
# xf.use_stash may generate free commands.
for _, sr in xf.use_stash:
sh = self.src.RangeSha1(sr)
assert sh in stashes
stashes[sh] -= 1
if stashes[sh] == 0:
stashed_blocks -= sr.size()
stashes.pop(sh)
num_of_bytes = new_blocks * self.tgt.blocksize
logger.info(
" Total %d blocks (%d bytes) are packed as new blocks due to "
"insufficient cache size.", new_blocks, num_of_bytes)
return new_blocks
def ComputePatches(self, prefix):
logger.info("Reticulating splines...")
diff_queue = []
patch_num = 0
with open(prefix + ".new.dat", "wb") as new_f:
for index, xf in enumerate(self.transfers):
if xf.style == "zero":
tgt_size = xf.tgt_ranges.size() * self.tgt.blocksize
logger.info(
"%10d %10d (%6.2f%%) %7s %s %s", tgt_size, tgt_size, 100.0,
xf.style, xf.tgt_name, str(xf.tgt_ranges))
elif xf.style == "new":
self.tgt.WriteRangeDataToFd(xf.tgt_ranges, new_f)
tgt_size = xf.tgt_ranges.size() * self.tgt.blocksize
logger.info(
"%10d %10d (%6.2f%%) %7s %s %s", tgt_size, tgt_size, 100.0,
xf.style, xf.tgt_name, str(xf.tgt_ranges))
elif xf.style == "diff":
# We can't compare src and tgt directly because they may have
# the same content but be broken up into blocks differently, eg:
#
# ["he", "llo"] vs ["h", "ello"]
#
# We want those to compare equal, ideally without having to
# actually concatenate the strings (these may be tens of
# megabytes).
if xf.src_sha1 == xf.tgt_sha1:
# These are identical; we don't need to generate a patch,
# just issue copy commands on the device.
xf.style = "move"
xf.patch = None
tgt_size = xf.tgt_ranges.size() * self.tgt.blocksize
if xf.src_ranges != xf.tgt_ranges:
logger.info(
"%10d %10d (%6.2f%%) %7s %s %s (from %s)", tgt_size, tgt_size,
100.0, xf.style,
xf.tgt_name if xf.tgt_name == xf.src_name else (
xf.tgt_name + " (from " + xf.src_name + ")"),
str(xf.tgt_ranges), str(xf.src_ranges))
else:
if xf.patch:
# We have already generated the patch with imgdiff, while
# splitting large APKs (i.e. in FindTransfers()).
assert not self.disable_imgdiff
imgdiff = True
else:
imgdiff = self.CanUseImgdiff(
xf.tgt_name, xf.tgt_ranges, xf.src_ranges)
xf.style = "imgdiff" if imgdiff else "bsdiff"
diff_queue.append((index, imgdiff, patch_num))
patch_num += 1
else:
assert False, "unknown style " + xf.style
if diff_queue:
if self.threads > 1:
logger.info("Computing patches (using %d threads)...", self.threads)
else:
logger.info("Computing patches...")
diff_total = len(diff_queue)
patches = [None] * diff_total
error_messages = []
# Using multiprocessing doesn't give additional benefits, due to the
# pattern of the code. The diffing work is done by subprocess.call, which
# already runs in a separate process (not affected much by the GIL -
# Global Interpreter Lock). Using multiprocess also requires either a)
# writing the diff input files in the main process before forking, or b)
# reopening the image file (SparseImage) in the worker processes. Doing
# neither of them further improves the performance.
lock = threading.Lock()
def diff_worker():
while True:
with lock:
if not diff_queue:
return
xf_index, imgdiff, patch_index = diff_queue.pop()
xf = self.transfers[xf_index]
patch = xf.patch
if not patch:
src_ranges = xf.src_ranges
tgt_ranges = xf.tgt_ranges
src_file = common.MakeTempFile(prefix="src-")
with open(src_file, "wb") as fd:
self.src.WriteRangeDataToFd(src_ranges, fd)
tgt_file = common.MakeTempFile(prefix="tgt-")
with open(tgt_file, "wb") as fd:
self.tgt.WriteRangeDataToFd(tgt_ranges, fd)
message = []
try:
patch = compute_patch(src_file, tgt_file, imgdiff)
except ValueError as e:
message.append(
"Failed to generate %s for %s: tgt=%s, src=%s:\n%s" % (
"imgdiff" if imgdiff else "bsdiff",
xf.tgt_name if xf.tgt_name == xf.src_name else
xf.tgt_name + " (from " + xf.src_name + ")",
xf.tgt_ranges, xf.src_ranges, e.message))
if message:
with lock:
error_messages.extend(message)
with lock:
patches[patch_index] = (xf_index, patch)
threads = [threading.Thread(target=diff_worker)
for _ in range(self.threads)]
for th in threads:
th.start()
while threads:
threads.pop().join()
if error_messages:
logger.error('ERROR:')
logger.error('\n'.join(error_messages))
logger.error('\n\n\n')
sys.exit(1)
else:
patches = []
offset = 0
with open(prefix + ".patch.dat", "wb") as patch_fd:
for index, patch in patches:
xf = self.transfers[index]
xf.patch_len = len(patch)
xf.patch_start = offset
offset += xf.patch_len
patch_fd.write(patch)
tgt_size = xf.tgt_ranges.size() * self.tgt.blocksize
logger.info(
"%10d %10d (%6.2f%%) %7s %s %s %s", xf.patch_len, tgt_size,
xf.patch_len * 100.0 / tgt_size, xf.style,
xf.tgt_name if xf.tgt_name == xf.src_name else (
xf.tgt_name + " (from " + xf.src_name + ")"),
xf.tgt_ranges, xf.src_ranges)
def AssertSha1Good(self):
"""Check the SHA-1 of the src & tgt blocks in the transfer list.
Double check the SHA-1 value to avoid the issue in b/71908713, where
SparseImage.RangeSha1() messed up with the hash calculation in multi-thread
environment. That specific problem has been fixed by protecting the
underlying generator function 'SparseImage._GetRangeData()' with lock.
"""
for xf in self.transfers:
tgt_sha1 = self.tgt.RangeSha1(xf.tgt_ranges)
assert xf.tgt_sha1 == tgt_sha1
if xf.style == "diff":
src_sha1 = self.src.RangeSha1(xf.src_ranges)
assert xf.src_sha1 == src_sha1
def AssertSequenceGood(self):
# Simulate the sequences of transfers we will output, and check that:
# - we never read a block after writing it, and
# - we write every block we care about exactly once.
# Start with no blocks having been touched yet.
touched = array.array("B", "\0" * self.tgt.total_blocks)
# Imagine processing the transfers in order.
for xf in self.transfers:
# Check that the input blocks for this transfer haven't yet been touched.
x = xf.src_ranges
for _, sr in xf.use_stash:
x = x.subtract(sr)
for s, e in x:
# Source image could be larger. Don't check the blocks that are in the
# source image only. Since they are not in 'touched', and won't ever
# be touched.
for i in range(s, min(e, self.tgt.total_blocks)):
assert touched[i] == 0
# Check that the output blocks for this transfer haven't yet
# been touched, and touch all the blocks written by this
# transfer.
for s, e in xf.tgt_ranges:
for i in range(s, e):
assert touched[i] == 0
touched[i] = 1
if self.tgt.hashtree_info:
for s, e in self.tgt.hashtree_info.hashtree_range:
for i in range(s, e):
assert touched[i] == 0
touched[i] = 1
# Check that we've written every target block.
for s, e in self.tgt.care_map:
for i in range(s, e):
assert touched[i] == 1
def ImproveVertexSequence(self):
logger.info("Improving vertex order...")
# At this point our digraph is acyclic; we reversed any edges that
# were backwards in the heuristically-generated sequence. The
# previously-generated order is still acceptable, but we hope to
# find a better order that needs less memory for stashed data.
# Now we do a topological sort to generate a new vertex order,
# using a greedy algorithm to choose which vertex goes next
# whenever we have a choice.
# Make a copy of the edge set; this copy will get destroyed by the
# algorithm.
for xf in self.transfers:
xf.incoming = xf.goes_after.copy()
xf.outgoing = xf.goes_before.copy()
L = [] # the new vertex order
# S is the set of sources in the remaining graph; we always choose
# the one that leaves the least amount of stashed data after it's
# executed.
S = [(u.NetStashChange(), u.order, u) for u in self.transfers
if not u.incoming]
heapq.heapify(S)
while S:
_, _, xf = heapq.heappop(S)
L.append(xf)
for u in xf.outgoing:
del u.incoming[xf]
if not u.incoming:
heapq.heappush(S, (u.NetStashChange(), u.order, u))
# if this fails then our graph had a cycle.
assert len(L) == len(self.transfers)
self.transfers = L
for i, xf in enumerate(L):
xf.order = i
def ReverseBackwardEdges(self):
"""Reverse unsatisfying edges and compute pairs of stashed blocks.
For each transfer, make sure it properly stashes the blocks it touches and
will be used by later transfers. It uses pairs of (stash_raw_id, range) to
record the blocks to be stashed. 'stash_raw_id' is an id that uniquely
identifies each pair. Note that for the same range (e.g. RangeSet("1-5")),
it is possible to have multiple pairs with different 'stash_raw_id's. Each
'stash_raw_id' will be consumed by one transfer. In BBOTA v3+, identical
blocks will be written to the same stash slot in WriteTransfers().
"""
logger.info("Reversing backward edges...")
in_order = 0
out_of_order = 0
stash_raw_id = 0
stash_size = 0
for xf in self.transfers:
for u in xf.goes_before.copy():
# xf should go before u
if xf.order < u.order:
# it does, hurray!
in_order += 1
else:
# it doesn't, boo. modify u to stash the blocks that it
# writes that xf wants to read, and then require u to go
# before xf.
out_of_order += 1
overlap = xf.src_ranges.intersect(u.tgt_ranges)
assert overlap
u.stash_before.append((stash_raw_id, overlap))
xf.use_stash.append((stash_raw_id, overlap))
stash_raw_id += 1
stash_size += overlap.size()
# reverse the edge direction; now xf must go after u
del xf.goes_before[u]
del u.goes_after[xf]
xf.goes_after[u] = None # value doesn't matter
u.goes_before[xf] = None
logger.info(
" %d/%d dependencies (%.2f%%) were violated; %d source blocks "
"stashed.", out_of_order, in_order + out_of_order,
(out_of_order * 100.0 / (in_order + out_of_order)) if (
in_order + out_of_order) else 0.0,
stash_size)
def FindVertexSequence(self):
logger.info("Finding vertex sequence...")
# This is based on "A Fast & Effective Heuristic for the Feedback
# Arc Set Problem" by P. Eades, X. Lin, and W.F. Smyth. Think of
# it as starting with the digraph G and moving all the vertices to
# be on a horizontal line in some order, trying to minimize the
# number of edges that end up pointing to the left. Left-pointing
# edges will get removed to turn the digraph into a DAG. In this
# case each edge has a weight which is the number of source blocks
# we'll lose if that edge is removed; we try to minimize the total
# weight rather than just the number of edges.
# Make a copy of the edge set; this copy will get destroyed by the
# algorithm.
for xf in self.transfers:
xf.incoming = xf.goes_after.copy()
xf.outgoing = xf.goes_before.copy()
xf.score = sum(xf.outgoing.values()) - sum(xf.incoming.values())
# We use an OrderedDict instead of just a set so that the output
# is repeatable; otherwise it would depend on the hash values of
# the transfer objects.
G = OrderedDict()
for xf in self.transfers:
G[xf] = None
s1 = deque() # the left side of the sequence, built from left to right
s2 = deque() # the right side of the sequence, built from right to left
heap = []
for xf in self.transfers:
xf.heap_item = HeapItem(xf)
heap.append(xf.heap_item)
heapq.heapify(heap)
# Use OrderedDict() instead of set() to preserve the insertion order. Need
# to use 'sinks[key] = None' to add key into the set. sinks will look like
# { key1: None, key2: None, ... }.
sinks = OrderedDict.fromkeys(u for u in G if not u.outgoing)
sources = OrderedDict.fromkeys(u for u in G if not u.incoming)
def adjust_score(iu, delta):
iu.score += delta
iu.heap_item.clear()
iu.heap_item = HeapItem(iu)
heapq.heappush(heap, iu.heap_item)
while G:
# Put all sinks at the end of the sequence.
while sinks:
new_sinks = OrderedDict()
for u in sinks:
if u not in G:
continue
s2.appendleft(u)
del G[u]
for iu in u.incoming:
adjust_score(iu, -iu.outgoing.pop(u))
if not iu.outgoing:
new_sinks[iu] = None
sinks = new_sinks
# Put all the sources at the beginning of the sequence.
while sources:
new_sources = OrderedDict()
for u in sources:
if u not in G:
continue
s1.append(u)
del G[u]
for iu in u.outgoing:
adjust_score(iu, +iu.incoming.pop(u))
if not iu.incoming:
new_sources[iu] = None
sources = new_sources
if not G:
break
# Find the "best" vertex to put next. "Best" is the one that
# maximizes the net difference in source blocks saved we get by
# pretending it's a source rather than a sink.
while True:
u = heapq.heappop(heap)
if u and u.item in G:
u = u.item
break
s1.append(u)
del G[u]
for iu in u.outgoing:
adjust_score(iu, +iu.incoming.pop(u))
if not iu.incoming:
sources[iu] = None
for iu in u.incoming:
adjust_score(iu, -iu.outgoing.pop(u))
if not iu.outgoing:
sinks[iu] = None
# Now record the sequence in the 'order' field of each transfer,
# and by rearranging self.transfers to be in the chosen sequence.
new_transfers = []
for x in itertools.chain(s1, s2):
x.order = len(new_transfers)
new_transfers.append(x)
del x.incoming
del x.outgoing
self.transfers = new_transfers
def GenerateDigraph(self):
logger.info("Generating digraph...")
# Each item of source_ranges will be:
# - None, if that block is not used as a source,
# - an ordered set of transfers.
source_ranges = []
for b in self.transfers:
for s, e in b.src_ranges:
if e > len(source_ranges):
source_ranges.extend([None] * (e-len(source_ranges)))
for i in range(s, e):
if source_ranges[i] is None:
source_ranges[i] = OrderedDict.fromkeys([b])
else:
source_ranges[i][b] = None
for a in self.transfers:
intersections = OrderedDict()
for s, e in a.tgt_ranges:
for i in range(s, e):
if i >= len(source_ranges):
break
# Add all the Transfers in source_ranges[i] to the (ordered) set.
if source_ranges[i] is not None:
for j in source_ranges[i]:
intersections[j] = None
for b in intersections:
if a is b:
continue
# If the blocks written by A are read by B, then B needs to go before A.
i = a.tgt_ranges.intersect(b.src_ranges)
if i:
if b.src_name == "__ZERO":
# the cost of removing source blocks for the __ZERO domain
# is (nearly) zero.
size = 0
else:
size = i.size()
b.goes_before[a] = size
a.goes_after[b] = size
def FindTransfers(self):
"""Parse the file_map to generate all the transfers."""
def AddSplitTransfersWithFixedSizeChunks(tgt_name, src_name, tgt_ranges,
src_ranges, style, by_id):
"""Add one or multiple Transfer()s by splitting large files.
For BBOTA v3, we need to stash source blocks for resumable feature.
However, with the growth of file size and the shrink of the cache
partition source blocks are too large to be stashed. If a file occupies
too many blocks, we split it into smaller pieces by getting multiple
Transfer()s.
The downside is that after splitting, we may increase the package size
since the split pieces don't align well. According to our experiments,
1/8 of the cache size as the per-piece limit appears to be optimal.
Compared to the fixed 1024-block limit, it reduces the overall package
size by 30% for volantis, and 20% for angler and bullhead."""
pieces = 0
while (tgt_ranges.size() > max_blocks_per_transfer and
src_ranges.size() > max_blocks_per_transfer):
tgt_split_name = "%s-%d" % (tgt_name, pieces)
src_split_name = "%s-%d" % (src_name, pieces)
tgt_first = tgt_ranges.first(max_blocks_per_transfer)
src_first = src_ranges.first(max_blocks_per_transfer)
Transfer(tgt_split_name, src_split_name, tgt_first, src_first,
self.tgt.RangeSha1(tgt_first), self.src.RangeSha1(src_first),
style, by_id)
tgt_ranges = tgt_ranges.subtract(tgt_first)
src_ranges = src_ranges.subtract(src_first)
pieces += 1
# Handle remaining blocks.
if tgt_ranges.size() or src_ranges.size():
# Must be both non-empty.
assert tgt_ranges.size() and src_ranges.size()
tgt_split_name = "%s-%d" % (tgt_name, pieces)
src_split_name = "%s-%d" % (src_name, pieces)
Transfer(tgt_split_name, src_split_name, tgt_ranges, src_ranges,
self.tgt.RangeSha1(tgt_ranges), self.src.RangeSha1(src_ranges),
style, by_id)
def AddSplitTransfers(tgt_name, src_name, tgt_ranges, src_ranges, style,
by_id):
"""Find all the zip files and split the others with a fixed chunk size.
This function will construct a list of zip archives, which will later be
split by imgdiff to reduce the final patch size. For the other files,
we will plainly split them based on a fixed chunk size with the potential
patch size penalty.
"""
assert style == "diff"
# Change nothing for small files.
if (tgt_ranges.size() <= max_blocks_per_transfer and
src_ranges.size() <= max_blocks_per_transfer):
Transfer(tgt_name, src_name, tgt_ranges, src_ranges,
self.tgt.RangeSha1(tgt_ranges), self.src.RangeSha1(src_ranges),
style, by_id)
return
# Split large APKs with imgdiff, if possible. We're intentionally checking
# file types one more time (CanUseImgdiff() checks that as well), before
# calling the costly RangeSha1()s.
if (self.FileTypeSupportedByImgdiff(tgt_name) and
self.tgt.RangeSha1(tgt_ranges) != self.src.RangeSha1(src_ranges)):
if self.CanUseImgdiff(tgt_name, tgt_ranges, src_ranges, True):
large_apks.append((tgt_name, src_name, tgt_ranges, src_ranges))
return
AddSplitTransfersWithFixedSizeChunks(tgt_name, src_name, tgt_ranges,
src_ranges, style, by_id)
def AddTransfer(tgt_name, src_name, tgt_ranges, src_ranges, style, by_id,
split=False):
"""Wrapper function for adding a Transfer()."""
# We specialize diff transfers only (which covers bsdiff/imgdiff/move);
# otherwise add the Transfer() as is.
if style != "diff" or not split:
Transfer(tgt_name, src_name, tgt_ranges, src_ranges,
self.tgt.RangeSha1(tgt_ranges), self.src.RangeSha1(src_ranges),
style, by_id)
return
# Handle .odex files specially to analyze the block-wise difference. If
# most of the blocks are identical with only few changes (e.g. header),
# we will patch the changed blocks only. This avoids stashing unchanged
# blocks while patching. We limit the analysis to files without size
# changes only. This is to avoid sacrificing the OTA generation cost too
# much.
if (tgt_name.split(".")[-1].lower() == 'odex' and
tgt_ranges.size() == src_ranges.size()):
# 0.5 threshold can be further tuned. The tradeoff is: if only very
# few blocks remain identical, we lose the opportunity to use imgdiff
# that may have better compression ratio than bsdiff.
crop_threshold = 0.5
tgt_skipped = RangeSet()
src_skipped = RangeSet()
tgt_size = tgt_ranges.size()
tgt_changed = 0
for src_block, tgt_block in zip(src_ranges.next_item(),
tgt_ranges.next_item()):
src_rs = RangeSet(str(src_block))
tgt_rs = RangeSet(str(tgt_block))
if self.src.ReadRangeSet(src_rs) == self.tgt.ReadRangeSet(tgt_rs):
tgt_skipped = tgt_skipped.union(tgt_rs)
src_skipped = src_skipped.union(src_rs)
else:
tgt_changed += tgt_rs.size()
# Terminate early if no clear sign of benefits.
if tgt_changed > tgt_size * crop_threshold:
break
if tgt_changed < tgt_size * crop_threshold:
assert tgt_changed + tgt_skipped.size() == tgt_size
logger.info(
'%10d %10d (%6.2f%%) %s', tgt_skipped.size(), tgt_size,
tgt_skipped.size() * 100.0 / tgt_size, tgt_name)
AddSplitTransfers(
"%s-skipped" % (tgt_name,),
"%s-skipped" % (src_name,),
tgt_skipped, src_skipped, style, by_id)
# Intentionally change the file extension to avoid being imgdiff'd as
# the files are no longer in their original format.
tgt_name = "%s-cropped" % (tgt_name,)
src_name = "%s-cropped" % (src_name,)
tgt_ranges = tgt_ranges.subtract(tgt_skipped)
src_ranges = src_ranges.subtract(src_skipped)
# Possibly having no changed blocks.
if not tgt_ranges:
return
# Add the transfer(s).
AddSplitTransfers(
tgt_name, src_name, tgt_ranges, src_ranges, style, by_id)
def ParseAndValidateSplitInfo(patch_size, tgt_ranges, src_ranges,
split_info):
"""Parse the split_info and return a list of info tuples.
Args:
patch_size: total size of the patch file.
tgt_ranges: Ranges of the target file within the original image.
src_ranges: Ranges of the source file within the original image.
split_info format:
imgdiff version#
count of pieces
<patch_size_1> <tgt_size_1> <src_ranges_1>
...
<patch_size_n> <tgt_size_n> <src_ranges_n>
Returns:
[patch_start, patch_len, split_tgt_ranges, split_src_ranges]
"""
version = int(split_info[0])
assert version == 2
count = int(split_info[1])
assert len(split_info) - 2 == count
split_info_list = []
patch_start = 0
tgt_remain = copy.deepcopy(tgt_ranges)
# each line has the format <patch_size>, <tgt_size>, <src_ranges>
for line in split_info[2:]:
info = line.split()
assert len(info) == 3
patch_length = int(info[0])
split_tgt_size = int(info[1])
assert split_tgt_size % 4096 == 0
assert split_tgt_size / 4096 <= tgt_remain.size()
split_tgt_ranges = tgt_remain.first(split_tgt_size / 4096)
tgt_remain = tgt_remain.subtract(split_tgt_ranges)
# Find the split_src_ranges within the image file from its relative
# position in file.
split_src_indices = RangeSet.parse_raw(info[2])
split_src_ranges = RangeSet()
for r in split_src_indices:
curr_range = src_ranges.first(r[1]).subtract(src_ranges.first(r[0]))
assert not split_src_ranges.overlaps(curr_range)
split_src_ranges = split_src_ranges.union(curr_range)
split_info_list.append((patch_start, patch_length,
split_tgt_ranges, split_src_ranges))
patch_start += patch_length
# Check that the sizes of all the split pieces add up to the final file
# size for patch and target.
assert tgt_remain.size() == 0
assert patch_start == patch_size
return split_info_list
def SplitLargeApks():
"""Split the large apks files.
Example: Chrome.apk will be split into
src-0: Chrome.apk-0, tgt-0: Chrome.apk-0
src-1: Chrome.apk-1, tgt-1: Chrome.apk-1
...
After the split, the target pieces are continuous and block aligned; and
the source pieces are mutually exclusive. During the split, we also
generate and save the image patch between src-X & tgt-X. This patch will
be valid because the block ranges of src-X & tgt-X will always stay the
same afterwards; but there's a chance we don't use the patch if we
convert the "diff" command into "new" or "move" later.
"""
while True:
with transfer_lock:
if not large_apks:
return
tgt_name, src_name, tgt_ranges, src_ranges = large_apks.pop(0)
src_file = common.MakeTempFile(prefix="src-")
tgt_file = common.MakeTempFile(prefix="tgt-")
with open(src_file, "wb") as src_fd:
self.src.WriteRangeDataToFd(src_ranges, src_fd)
with open(tgt_file, "wb") as tgt_fd:
self.tgt.WriteRangeDataToFd(tgt_ranges, tgt_fd)
patch_file = common.MakeTempFile(prefix="patch-")
patch_info_file = common.MakeTempFile(prefix="split_info-")
cmd = ["imgdiff", "-z",
"--block-limit={}".format(max_blocks_per_transfer),
"--split-info=" + patch_info_file,
src_file, tgt_file, patch_file]
proc = common.Run(cmd)
imgdiff_output, _ = proc.communicate()
assert proc.returncode == 0, \
"Failed to create imgdiff patch between {} and {}:\n{}".format(
src_name, tgt_name, imgdiff_output)
with open(patch_info_file) as patch_info:
lines = patch_info.readlines()
patch_size_total = os.path.getsize(patch_file)
split_info_list = ParseAndValidateSplitInfo(patch_size_total,
tgt_ranges, src_ranges,
lines)
for index, (patch_start, patch_length, split_tgt_ranges,
split_src_ranges) in enumerate(split_info_list):
with open(patch_file) as f:
f.seek(patch_start)
patch_content = f.read(patch_length)
split_src_name = "{}-{}".format(src_name, index)
split_tgt_name = "{}-{}".format(tgt_name, index)
split_large_apks.append((split_tgt_name,
split_src_name,
split_tgt_ranges,
split_src_ranges,
patch_content))
logger.info("Finding transfers...")
large_apks = []
split_large_apks = []
cache_size = common.OPTIONS.cache_size
split_threshold = 0.125
max_blocks_per_transfer = int(cache_size * split_threshold /
self.tgt.blocksize)
empty = RangeSet()
for tgt_fn, tgt_ranges in sorted(self.tgt.file_map.items()):
if tgt_fn == "__ZERO":
# the special "__ZERO" domain is all the blocks not contained
# in any file and that are filled with zeros. We have a
# special transfer style for zero blocks.
src_ranges = self.src.file_map.get("__ZERO", empty)
AddTransfer(tgt_fn, "__ZERO", tgt_ranges, src_ranges,
"zero", self.transfers)
continue
elif tgt_fn == "__COPY":
# "__COPY" domain includes all the blocks not contained in any
# file and that need to be copied unconditionally to the target.
AddTransfer(tgt_fn, None, tgt_ranges, empty, "new", self.transfers)
continue
elif tgt_fn == "__HASHTREE":
continue
elif tgt_fn in self.src.file_map:
# Look for an exact pathname match in the source.
AddTransfer(tgt_fn, tgt_fn, tgt_ranges, self.src.file_map[tgt_fn],
"diff", self.transfers, True)
continue
b = os.path.basename(tgt_fn)
if b in self.src_basenames:
# Look for an exact basename match in the source.
src_fn = self.src_basenames[b]
AddTransfer(tgt_fn, src_fn, tgt_ranges, self.src.file_map[src_fn],
"diff", self.transfers, True)
continue
b = re.sub("[0-9]+", "#", b)
if b in self.src_numpatterns:
# Look for a 'number pattern' match (a basename match after
# all runs of digits are replaced by "#"). (This is useful
# for .so files that contain version numbers in the filename
# that get bumped.)
src_fn = self.src_numpatterns[b]
AddTransfer(tgt_fn, src_fn, tgt_ranges, self.src.file_map[src_fn],
"diff", self.transfers, True)
continue
AddTransfer(tgt_fn, None, tgt_ranges, empty, "new", self.transfers)
transfer_lock = threading.Lock()
threads = [threading.Thread(target=SplitLargeApks)
for _ in range(self.threads)]
for th in threads:
th.start()
while threads:
threads.pop().join()
# Sort the split transfers for large apks to generate a determinate package.
split_large_apks.sort()
for (tgt_name, src_name, tgt_ranges, src_ranges,
patch) in split_large_apks:
transfer_split = Transfer(tgt_name, src_name, tgt_ranges, src_ranges,
self.tgt.RangeSha1(tgt_ranges),
self.src.RangeSha1(src_ranges),
"diff", self.transfers)
transfer_split.patch = patch
def AbbreviateSourceNames(self):
for k in self.src.file_map.keys():
b = os.path.basename(k)
self.src_basenames[b] = k
b = re.sub("[0-9]+", "#", b)
self.src_numpatterns[b] = k
@staticmethod
def AssertPartition(total, seq):
"""Assert that all the RangeSets in 'seq' form a partition of the
'total' RangeSet (ie, they are nonintersecting and their union
equals 'total')."""
so_far = RangeSet()
for i in seq:
assert not so_far.overlaps(i)
so_far = so_far.union(i)
assert so_far == total