| #!/usr/bin/env python |
| # |
| # Copyright (C) 2008 The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| """ |
| Given a target-files zipfile, produces an OTA package that installs |
| that build. An incremental OTA is produced if -i is given, otherwise |
| a full OTA is produced. |
| |
| Usage: ota_from_target_files [flags] input_target_files output_ota_package |
| |
| --board_config <file> |
| Deprecated. |
| |
| -k (--package_key) <key> Key to use to sign the package (default is |
| the value of default_system_dev_certificate from the input |
| target-files's META/misc_info.txt, or |
| "build/target/product/security/testkey" if that value is not |
| specified). |
| |
| For incremental OTAs, the default value is based on the source |
| target-file, not the target build. |
| |
| -i (--incremental_from) <file> |
| Generate an incremental OTA using the given target-files zip as |
| the starting build. |
| |
| --full_radio |
| When generating an incremental OTA, always include a full copy of |
| radio image. This option is only meaningful when -i is specified, |
| because a full radio is always included in a full OTA if applicable. |
| |
| -v (--verify) |
| Remount and verify the checksums of the files written to the |
| system and vendor (if used) partitions. Incremental builds only. |
| |
| -o (--oem_settings) <file> |
| Use the file to specify the expected OEM-specific properties |
| on the OEM partition of the intended device. |
| |
| -w (--wipe_user_data) |
| Generate an OTA package that will wipe the user data partition |
| when installed. |
| |
| -n (--no_prereq) |
| Omit the timestamp prereq check normally included at the top of |
| the build scripts (used for developer OTA packages which |
| legitimately need to go back and forth). |
| |
| -e (--extra_script) <file> |
| Insert the contents of file at the end of the update script. |
| |
| -a (--aslr_mode) <on|off> |
| Specify whether to turn on ASLR for the package (on by default). |
| |
| -2 (--two_step) |
| Generate a 'two-step' OTA package, where recovery is updated |
| first, so that any changes made to the system partition are done |
| using the new recovery (new kernel, etc.). |
| |
| --block |
| Generate a block-based OTA if possible. Will fall back to a |
| file-based OTA if the target_files is older and doesn't support |
| block-based OTAs. |
| |
| -b (--binary) <file> |
| Use the given binary as the update-binary in the output package, |
| instead of the binary in the build's target_files. Use for |
| development only. |
| |
| -t (--worker_threads) <int> |
| Specifies the number of worker-threads that will be used when |
| generating patches for incremental updates (defaults to 3). |
| |
| --stash_threshold <float> |
| Specifies the threshold that will be used to compute the maximum |
| allowed stash size (defaults to 0.8). |
| """ |
| |
| import sys |
| |
| if sys.hexversion < 0x02070000: |
| print >> sys.stderr, "Python 2.7 or newer is required." |
| sys.exit(1) |
| |
| import multiprocessing |
| import os |
| import tempfile |
| import zipfile |
| |
| import common |
| import edify_generator |
| import sparse_img |
| |
| OPTIONS = common.OPTIONS |
| OPTIONS.package_key = None |
| OPTIONS.incremental_source = None |
| OPTIONS.verify = False |
| OPTIONS.require_verbatim = set() |
| OPTIONS.prohibit_verbatim = set(("system/build.prop",)) |
| OPTIONS.patch_threshold = 0.95 |
| OPTIONS.wipe_user_data = False |
| OPTIONS.omit_prereq = False |
| OPTIONS.extra_script = None |
| OPTIONS.aslr_mode = True |
| OPTIONS.worker_threads = multiprocessing.cpu_count() // 2 |
| if OPTIONS.worker_threads == 0: |
| OPTIONS.worker_threads = 1 |
| OPTIONS.two_step = False |
| OPTIONS.no_signing = False |
| OPTIONS.block_based = False |
| OPTIONS.updater_binary = None |
| OPTIONS.oem_source = None |
| OPTIONS.fallback_to_full = True |
| OPTIONS.full_radio = False |
| |
| |
| def MostPopularKey(d, default): |
| """Given a dict, return the key corresponding to the largest |
| value. Returns 'default' if the dict is empty.""" |
| x = [(v, k) for (k, v) in d.iteritems()] |
| if not x: |
| return default |
| x.sort() |
| return x[-1][1] |
| |
| |
| def IsSymlink(info): |
| """Return true if the zipfile.ZipInfo object passed in represents a |
| symlink.""" |
| return (info.external_attr >> 16) & 0o770000 == 0o120000 |
| |
| def IsRegular(info): |
| """Return true if the zipfile.ZipInfo object passed in represents a |
| regular file.""" |
| return (info.external_attr >> 16) & 0o770000 == 0o100000 |
| |
| def ClosestFileMatch(src, tgtfiles, existing): |
| """Returns the closest file match between a source file and list |
| of potential matches. The exact filename match is preferred, |
| then the sha1 is searched for, and finally a file with the same |
| basename is evaluated. Rename support in the updater-binary is |
| required for the latter checks to be used.""" |
| |
| result = tgtfiles.get("path:" + src.name) |
| if result is not None: |
| return result |
| |
| if not OPTIONS.target_info_dict.get("update_rename_support", False): |
| return None |
| |
| if src.size < 1000: |
| return None |
| |
| result = tgtfiles.get("sha1:" + src.sha1) |
| if result is not None and existing.get(result.name) is None: |
| return result |
| result = tgtfiles.get("file:" + src.name.split("/")[-1]) |
| if result is not None and existing.get(result.name) is None: |
| return result |
| return None |
| |
| class ItemSet(object): |
| def __init__(self, partition, fs_config): |
| self.partition = partition |
| self.fs_config = fs_config |
| self.ITEMS = {} |
| |
| def Get(self, name, is_dir=False): |
| if name not in self.ITEMS: |
| self.ITEMS[name] = Item(self, name, is_dir=is_dir) |
| return self.ITEMS[name] |
| |
| def GetMetadata(self, input_zip): |
| # The target_files contains a record of what the uid, |
| # gid, and mode are supposed to be. |
| output = input_zip.read(self.fs_config) |
| |
| for line in output.split("\n"): |
| if not line: |
| continue |
| columns = line.split() |
| name, uid, gid, mode = columns[:4] |
| selabel = None |
| capabilities = None |
| |
| # After the first 4 columns, there are a series of key=value |
| # pairs. Extract out the fields we care about. |
| for element in columns[4:]: |
| key, value = element.split("=") |
| if key == "selabel": |
| selabel = value |
| if key == "capabilities": |
| capabilities = value |
| |
| i = self.ITEMS.get(name, None) |
| if i is not None: |
| i.uid = int(uid) |
| i.gid = int(gid) |
| i.mode = int(mode, 8) |
| i.selabel = selabel |
| i.capabilities = capabilities |
| if i.is_dir: |
| i.children.sort(key=lambda i: i.name) |
| |
| # Set metadata for the files generated by this script. For full recovery |
| # image at system/etc/recovery.img, it will be taken care by fs_config. |
| i = self.ITEMS.get("system/recovery-from-boot.p", None) |
| if i: |
| i.uid, i.gid, i.mode, i.selabel, i.capabilities = 0, 0, 0o644, None, None |
| i = self.ITEMS.get("system/etc/install-recovery.sh", None) |
| if i: |
| i.uid, i.gid, i.mode, i.selabel, i.capabilities = 0, 0, 0o544, None, None |
| |
| |
| class Item(object): |
| """Items represent the metadata (user, group, mode) of files and |
| directories in the system image.""" |
| def __init__(self, itemset, name, is_dir=False): |
| self.itemset = itemset |
| self.name = name |
| self.uid = None |
| self.gid = None |
| self.mode = None |
| self.selabel = None |
| self.capabilities = None |
| self.is_dir = is_dir |
| self.descendants = None |
| self.best_subtree = None |
| |
| if name: |
| self.parent = itemset.Get(os.path.dirname(name), is_dir=True) |
| self.parent.children.append(self) |
| else: |
| self.parent = None |
| if self.is_dir: |
| self.children = [] |
| |
| def Dump(self, indent=0): |
| if self.uid is not None: |
| print "%s%s %d %d %o" % ( |
| " " * indent, self.name, self.uid, self.gid, self.mode) |
| else: |
| print "%s%s %s %s %s" % ( |
| " " * indent, self.name, self.uid, self.gid, self.mode) |
| if self.is_dir: |
| print "%s%s" % (" "*indent, self.descendants) |
| print "%s%s" % (" "*indent, self.best_subtree) |
| for i in self.children: |
| i.Dump(indent=indent+1) |
| |
| def CountChildMetadata(self): |
| """Count up the (uid, gid, mode, selabel, capabilities) tuples for |
| all children and determine the best strategy for using set_perm_recursive |
| and set_perm to correctly chown/chmod all the files to their desired |
| values. Recursively calls itself for all descendants. |
| |
| Returns a dict of {(uid, gid, dmode, fmode, selabel, capabilities): count} |
| counting up all descendants of this node. (dmode or fmode may be None.) |
| Also sets the best_subtree of each directory Item to the (uid, gid, dmode, |
| fmode, selabel, capabilities) tuple that will match the most descendants of |
| that Item. |
| """ |
| |
| assert self.is_dir |
| key = (self.uid, self.gid, self.mode, None, self.selabel, |
| self.capabilities) |
| self.descendants = {key: 1} |
| d = self.descendants |
| for i in self.children: |
| if i.is_dir: |
| for k, v in i.CountChildMetadata().iteritems(): |
| d[k] = d.get(k, 0) + v |
| else: |
| k = (i.uid, i.gid, None, i.mode, i.selabel, i.capabilities) |
| d[k] = d.get(k, 0) + 1 |
| |
| # Find the (uid, gid, dmode, fmode, selabel, capabilities) |
| # tuple that matches the most descendants. |
| |
| # First, find the (uid, gid) pair that matches the most |
| # descendants. |
| ug = {} |
| for (uid, gid, _, _, _, _), count in d.iteritems(): |
| ug[(uid, gid)] = ug.get((uid, gid), 0) + count |
| ug = MostPopularKey(ug, (0, 0)) |
| |
| # Now find the dmode, fmode, selabel, and capabilities that match |
| # the most descendants with that (uid, gid), and choose those. |
| best_dmode = (0, 0o755) |
| best_fmode = (0, 0o644) |
| best_selabel = (0, None) |
| best_capabilities = (0, None) |
| for k, count in d.iteritems(): |
| if k[:2] != ug: |
| continue |
| if k[2] is not None and count >= best_dmode[0]: |
| best_dmode = (count, k[2]) |
| if k[3] is not None and count >= best_fmode[0]: |
| best_fmode = (count, k[3]) |
| if k[4] is not None and count >= best_selabel[0]: |
| best_selabel = (count, k[4]) |
| if k[5] is not None and count >= best_capabilities[0]: |
| best_capabilities = (count, k[5]) |
| self.best_subtree = ug + ( |
| best_dmode[1], best_fmode[1], best_selabel[1], best_capabilities[1]) |
| |
| return d |
| |
| def SetPermissions(self, script): |
| """Append set_perm/set_perm_recursive commands to 'script' to |
| set all permissions, users, and groups for the tree of files |
| rooted at 'self'.""" |
| |
| self.CountChildMetadata() |
| |
| def recurse(item, current): |
| # current is the (uid, gid, dmode, fmode, selabel, capabilities) tuple |
| # that the current item (and all its children) have already been set to. |
| # We only need to issue set_perm/set_perm_recursive commands if we're |
| # supposed to be something different. |
| if item.is_dir: |
| if current != item.best_subtree: |
| script.SetPermissionsRecursive("/"+item.name, *item.best_subtree) |
| current = item.best_subtree |
| |
| if item.uid != current[0] or item.gid != current[1] or \ |
| item.mode != current[2] or item.selabel != current[4] or \ |
| item.capabilities != current[5]: |
| script.SetPermissions("/"+item.name, item.uid, item.gid, |
| item.mode, item.selabel, item.capabilities) |
| |
| for i in item.children: |
| recurse(i, current) |
| else: |
| if item.uid != current[0] or item.gid != current[1] or \ |
| item.mode != current[3] or item.selabel != current[4] or \ |
| item.capabilities != current[5]: |
| script.SetPermissions("/"+item.name, item.uid, item.gid, |
| item.mode, item.selabel, item.capabilities) |
| |
| recurse(self, (-1, -1, -1, -1, None, None)) |
| |
| |
| def CopyPartitionFiles(itemset, input_zip, output_zip=None, substitute=None): |
| """Copies files for the partition in the input zip to the output |
| zip. Populates the Item class with their metadata, and returns a |
| list of symlinks. output_zip may be None, in which case the copy is |
| skipped (but the other side effects still happen). substitute is an |
| optional dict of {output filename: contents} to be output instead of |
| certain input files. |
| """ |
| |
| symlinks = [] |
| |
| partition = itemset.partition |
| |
| for info in input_zip.infolist(): |
| prefix = partition.upper() + "/" |
| if info.filename.startswith(prefix): |
| basefilename = info.filename[len(prefix):] |
| if IsSymlink(info): |
| symlinks.append((input_zip.read(info.filename), |
| "/" + partition + "/" + basefilename)) |
| else: |
| import copy |
| info2 = copy.copy(info) |
| fn = info2.filename = partition + "/" + basefilename |
| if substitute and fn in substitute and substitute[fn] is None: |
| continue |
| if output_zip is not None: |
| if substitute and fn in substitute: |
| data = substitute[fn] |
| else: |
| data = input_zip.read(info.filename) |
| common.ZipWriteStr(output_zip, info2, data) |
| if fn.endswith("/"): |
| itemset.Get(fn[:-1], is_dir=True) |
| else: |
| itemset.Get(fn) |
| |
| symlinks.sort() |
| return symlinks |
| |
| |
| def SignOutput(temp_zip_name, output_zip_name): |
| key_passwords = common.GetKeyPasswords([OPTIONS.package_key]) |
| pw = key_passwords[OPTIONS.package_key] |
| |
| common.SignFile(temp_zip_name, output_zip_name, OPTIONS.package_key, pw, |
| whole_file=True) |
| |
| |
| def AppendAssertions(script, info_dict, oem_dict=None): |
| oem_props = info_dict.get("oem_fingerprint_properties") |
| if oem_props is None or len(oem_props) == 0: |
| device = GetBuildProp("ro.product.device", info_dict) |
| script.AssertDevice(device) |
| else: |
| if oem_dict is None: |
| raise common.ExternalError( |
| "No OEM file provided to answer expected assertions") |
| for prop in oem_props.split(): |
| if oem_dict.get(prop) is None: |
| raise common.ExternalError( |
| "The OEM file is missing the property %s" % prop) |
| script.AssertOemProperty(prop, oem_dict.get(prop)) |
| |
| |
| def HasRecoveryPatch(target_files_zip): |
| namelist = [name for name in target_files_zip.namelist()] |
| return ("SYSTEM/recovery-from-boot.p" in namelist or |
| "SYSTEM/etc/recovery.img" in namelist) |
| |
| def HasVendorPartition(target_files_zip): |
| try: |
| target_files_zip.getinfo("VENDOR/") |
| return True |
| except KeyError: |
| return False |
| |
| def GetOemProperty(name, oem_props, oem_dict, info_dict): |
| if oem_props is not None and name in oem_props: |
| return oem_dict[name] |
| return GetBuildProp(name, info_dict) |
| |
| |
| def CalculateFingerprint(oem_props, oem_dict, info_dict): |
| if oem_props is None: |
| return GetBuildProp("ro.build.fingerprint", info_dict) |
| return "%s/%s/%s:%s" % ( |
| GetOemProperty("ro.product.brand", oem_props, oem_dict, info_dict), |
| GetOemProperty("ro.product.name", oem_props, oem_dict, info_dict), |
| GetOemProperty("ro.product.device", oem_props, oem_dict, info_dict), |
| GetBuildProp("ro.build.thumbprint", info_dict)) |
| |
| |
| def GetImage(which, tmpdir, info_dict): |
| # Return an image object (suitable for passing to BlockImageDiff) |
| # for the 'which' partition (most be "system" or "vendor"). If a |
| # prebuilt image and file map are found in tmpdir they are used, |
| # otherwise they are reconstructed from the individual files. |
| |
| assert which in ("system", "vendor") |
| |
| path = os.path.join(tmpdir, "IMAGES", which + ".img") |
| mappath = os.path.join(tmpdir, "IMAGES", which + ".map") |
| if os.path.exists(path) and os.path.exists(mappath): |
| print "using %s.img from target-files" % (which,) |
| # This is a 'new' target-files, which already has the image in it. |
| |
| else: |
| print "building %s.img from target-files" % (which,) |
| |
| # This is an 'old' target-files, which does not contain images |
| # already built. Build them. |
| |
| mappath = tempfile.mkstemp()[1] |
| OPTIONS.tempfiles.append(mappath) |
| |
| import add_img_to_target_files |
| if which == "system": |
| path = add_img_to_target_files.BuildSystem( |
| tmpdir, info_dict, block_list=mappath) |
| elif which == "vendor": |
| path = add_img_to_target_files.BuildVendor( |
| tmpdir, info_dict, block_list=mappath) |
| |
| # Bug: http://b/20939131 |
| # In ext4 filesystems, block 0 might be changed even being mounted |
| # R/O. We add it to clobbered_blocks so that it will be written to the |
| # target unconditionally. Note that they are still part of care_map. |
| clobbered_blocks = "0" |
| |
| return sparse_img.SparseImage(path, mappath, clobbered_blocks) |
| |
| |
| def WriteFullOTAPackage(input_zip, output_zip): |
| # TODO: how to determine this? We don't know what version it will |
| # be installed on top of. For now, we expect the API just won't |
| # change very often. Similarly for fstab, it might have changed |
| # in the target build. |
| script = edify_generator.EdifyGenerator(3, OPTIONS.info_dict) |
| |
| oem_props = OPTIONS.info_dict.get("oem_fingerprint_properties") |
| recovery_mount_options = OPTIONS.info_dict.get("recovery_mount_options") |
| oem_dict = None |
| if oem_props is not None and len(oem_props) > 0: |
| if OPTIONS.oem_source is None: |
| raise common.ExternalError("OEM source required for this build") |
| script.Mount("/oem", recovery_mount_options) |
| oem_dict = common.LoadDictionaryFromLines( |
| open(OPTIONS.oem_source).readlines()) |
| |
| metadata = { |
| "post-build": CalculateFingerprint(oem_props, oem_dict, |
| OPTIONS.info_dict), |
| "pre-device": GetOemProperty("ro.product.device", oem_props, oem_dict, |
| OPTIONS.info_dict), |
| "post-timestamp": GetBuildProp("ro.build.date.utc", OPTIONS.info_dict), |
| } |
| |
| device_specific = common.DeviceSpecificParams( |
| input_zip=input_zip, |
| input_version=OPTIONS.info_dict["recovery_api_version"], |
| output_zip=output_zip, |
| script=script, |
| input_tmp=OPTIONS.input_tmp, |
| metadata=metadata, |
| info_dict=OPTIONS.info_dict) |
| |
| has_recovery_patch = HasRecoveryPatch(input_zip) |
| block_based = OPTIONS.block_based and has_recovery_patch |
| |
| if not OPTIONS.omit_prereq: |
| ts = GetBuildProp("ro.build.date.utc", OPTIONS.info_dict) |
| ts_text = GetBuildProp("ro.build.date", OPTIONS.info_dict) |
| script.AssertOlderBuild(ts, ts_text) |
| |
| AppendAssertions(script, OPTIONS.info_dict, oem_dict) |
| device_specific.FullOTA_Assertions() |
| |
| # Two-step package strategy (in chronological order, which is *not* |
| # the order in which the generated script has things): |
| # |
| # if stage is not "2/3" or "3/3": |
| # write recovery image to boot partition |
| # set stage to "2/3" |
| # reboot to boot partition and restart recovery |
| # else if stage is "2/3": |
| # write recovery image to recovery partition |
| # set stage to "3/3" |
| # reboot to recovery partition and restart recovery |
| # else: |
| # (stage must be "3/3") |
| # set stage to "" |
| # do normal full package installation: |
| # wipe and install system, boot image, etc. |
| # set up system to update recovery partition on first boot |
| # complete script normally |
| # (allow recovery to mark itself finished and reboot) |
| |
| recovery_img = common.GetBootableImage("recovery.img", "recovery.img", |
| OPTIONS.input_tmp, "RECOVERY") |
| if OPTIONS.two_step: |
| if not OPTIONS.info_dict.get("multistage_support", None): |
| assert False, "two-step packages not supported by this build" |
| fs = OPTIONS.info_dict["fstab"]["/misc"] |
| assert fs.fs_type.upper() == "EMMC", \ |
| "two-step packages only supported on devices with EMMC /misc partitions" |
| bcb_dev = {"bcb_dev": fs.device} |
| common.ZipWriteStr(output_zip, "recovery.img", recovery_img.data) |
| script.AppendExtra(""" |
| if get_stage("%(bcb_dev)s") == "2/3" then |
| """ % bcb_dev) |
| script.WriteRawImage("/recovery", "recovery.img") |
| script.AppendExtra(""" |
| set_stage("%(bcb_dev)s", "3/3"); |
| reboot_now("%(bcb_dev)s", "recovery"); |
| else if get_stage("%(bcb_dev)s") == "3/3" then |
| """ % bcb_dev) |
| |
| # Dump fingerprints |
| script.Print("Target: %s" % CalculateFingerprint( |
| oem_props, oem_dict, OPTIONS.info_dict)) |
| |
| device_specific.FullOTA_InstallBegin() |
| |
| system_progress = 0.75 |
| |
| if OPTIONS.wipe_user_data: |
| system_progress -= 0.1 |
| if HasVendorPartition(input_zip): |
| system_progress -= 0.1 |
| |
| # Place a copy of file_contexts.bin into the OTA package which will be used |
| # by the recovery program. |
| if "selinux_fc" in OPTIONS.info_dict: |
| WritePolicyConfig(OPTIONS.info_dict["selinux_fc"], output_zip) |
| |
| recovery_mount_options = OPTIONS.info_dict.get("recovery_mount_options") |
| |
| system_items = ItemSet("system", "META/filesystem_config.txt") |
| script.ShowProgress(system_progress, 0) |
| |
| if block_based: |
| # Full OTA is done as an "incremental" against an empty source |
| # image. This has the effect of writing new data from the package |
| # to the entire partition, but lets us reuse the updater code that |
| # writes incrementals to do it. |
| system_tgt = GetImage("system", OPTIONS.input_tmp, OPTIONS.info_dict) |
| system_tgt.ResetFileMap() |
| system_diff = common.BlockDifference("system", system_tgt, src=None) |
| system_diff.WriteScript(script, output_zip) |
| else: |
| script.FormatPartition("/system") |
| script.Mount("/system", recovery_mount_options) |
| if not has_recovery_patch: |
| script.UnpackPackageDir("recovery", "/system") |
| script.UnpackPackageDir("system", "/system") |
| |
| symlinks = CopyPartitionFiles(system_items, input_zip, output_zip) |
| script.MakeSymlinks(symlinks) |
| |
| boot_img = common.GetBootableImage( |
| "boot.img", "boot.img", OPTIONS.input_tmp, "BOOT") |
| |
| if not block_based: |
| def output_sink(fn, data): |
| common.ZipWriteStr(output_zip, "recovery/" + fn, data) |
| system_items.Get("system/" + fn) |
| |
| common.MakeRecoveryPatch(OPTIONS.input_tmp, output_sink, |
| recovery_img, boot_img) |
| |
| system_items.GetMetadata(input_zip) |
| system_items.Get("system").SetPermissions(script) |
| |
| if HasVendorPartition(input_zip): |
| vendor_items = ItemSet("vendor", "META/vendor_filesystem_config.txt") |
| script.ShowProgress(0.1, 0) |
| |
| if block_based: |
| vendor_tgt = GetImage("vendor", OPTIONS.input_tmp, OPTIONS.info_dict) |
| vendor_tgt.ResetFileMap() |
| vendor_diff = common.BlockDifference("vendor", vendor_tgt) |
| vendor_diff.WriteScript(script, output_zip) |
| else: |
| script.FormatPartition("/vendor") |
| script.Mount("/vendor", recovery_mount_options) |
| script.UnpackPackageDir("vendor", "/vendor") |
| |
| symlinks = CopyPartitionFiles(vendor_items, input_zip, output_zip) |
| script.MakeSymlinks(symlinks) |
| |
| vendor_items.GetMetadata(input_zip) |
| vendor_items.Get("vendor").SetPermissions(script) |
| |
| common.CheckSize(boot_img.data, "boot.img", OPTIONS.info_dict) |
| common.ZipWriteStr(output_zip, "boot.img", boot_img.data) |
| |
| script.ShowProgress(0.05, 5) |
| script.WriteRawImage("/boot", "boot.img") |
| |
| script.ShowProgress(0.2, 10) |
| device_specific.FullOTA_InstallEnd() |
| |
| if OPTIONS.extra_script is not None: |
| script.AppendExtra(OPTIONS.extra_script) |
| |
| script.UnmountAll() |
| |
| if OPTIONS.wipe_user_data: |
| script.ShowProgress(0.1, 10) |
| script.FormatPartition("/data") |
| |
| if OPTIONS.two_step: |
| script.AppendExtra(""" |
| set_stage("%(bcb_dev)s", ""); |
| """ % bcb_dev) |
| script.AppendExtra("else\n") |
| script.WriteRawImage("/boot", "recovery.img") |
| script.AppendExtra(""" |
| set_stage("%(bcb_dev)s", "2/3"); |
| reboot_now("%(bcb_dev)s", ""); |
| endif; |
| endif; |
| """ % bcb_dev) |
| script.AddToZip(input_zip, output_zip, input_path=OPTIONS.updater_binary) |
| WriteMetadata(metadata, output_zip) |
| |
| |
| def WritePolicyConfig(file_name, output_zip): |
| common.ZipWrite(output_zip, file_name, os.path.basename(file_name)) |
| |
| |
| def WriteMetadata(metadata, output_zip): |
| common.ZipWriteStr(output_zip, "META-INF/com/android/metadata", |
| "".join(["%s=%s\n" % kv |
| for kv in sorted(metadata.iteritems())])) |
| |
| |
| def LoadPartitionFiles(z, partition): |
| """Load all the files from the given partition in a given target-files |
| ZipFile, and return a dict of {filename: File object}.""" |
| out = {} |
| prefix = partition.upper() + "/" |
| for info in z.infolist(): |
| if info.filename.startswith(prefix) and not IsSymlink(info): |
| basefilename = info.filename[len(prefix):] |
| fn = partition + "/" + basefilename |
| data = z.read(info.filename) |
| out[fn] = common.File(fn, data) |
| return out |
| |
| |
| def GetBuildProp(prop, info_dict): |
| """Return the fingerprint of the build of a given target-files info_dict.""" |
| try: |
| return info_dict.get("build.prop", {})[prop] |
| except KeyError: |
| raise common.ExternalError("couldn't find %s in build.prop" % (prop,)) |
| |
| |
| def AddToKnownPaths(filename, known_paths): |
| if filename[-1] == "/": |
| return |
| dirs = filename.split("/")[:-1] |
| while len(dirs) > 0: |
| path = "/".join(dirs) |
| if path in known_paths: |
| break |
| known_paths.add(path) |
| dirs.pop() |
| |
| |
| def WriteBlockIncrementalOTAPackage(target_zip, source_zip, output_zip): |
| # TODO(tbao): We should factor out the common parts between |
| # WriteBlockIncrementalOTAPackage() and WriteIncrementalOTAPackage(). |
| source_version = OPTIONS.source_info_dict["recovery_api_version"] |
| target_version = OPTIONS.target_info_dict["recovery_api_version"] |
| |
| if source_version == 0: |
| print ("WARNING: generating edify script for a source that " |
| "can't install it.") |
| script = edify_generator.EdifyGenerator( |
| source_version, OPTIONS.target_info_dict, |
| fstab=OPTIONS.source_info_dict["fstab"]) |
| |
| oem_props = OPTIONS.info_dict.get("oem_fingerprint_properties") |
| recovery_mount_options = OPTIONS.source_info_dict.get( |
| "recovery_mount_options") |
| oem_dict = None |
| if oem_props is not None and len(oem_props) > 0: |
| if OPTIONS.oem_source is None: |
| raise common.ExternalError("OEM source required for this build") |
| script.Mount("/oem", recovery_mount_options) |
| oem_dict = common.LoadDictionaryFromLines( |
| open(OPTIONS.oem_source).readlines()) |
| |
| metadata = { |
| "pre-device": GetOemProperty("ro.product.device", oem_props, oem_dict, |
| OPTIONS.source_info_dict), |
| "post-timestamp": GetBuildProp("ro.build.date.utc", |
| OPTIONS.target_info_dict), |
| } |
| |
| device_specific = common.DeviceSpecificParams( |
| source_zip=source_zip, |
| source_version=source_version, |
| target_zip=target_zip, |
| target_version=target_version, |
| output_zip=output_zip, |
| script=script, |
| metadata=metadata, |
| info_dict=OPTIONS.info_dict) |
| |
| source_fp = CalculateFingerprint(oem_props, oem_dict, |
| OPTIONS.source_info_dict) |
| target_fp = CalculateFingerprint(oem_props, oem_dict, |
| OPTIONS.target_info_dict) |
| metadata["pre-build"] = source_fp |
| metadata["post-build"] = target_fp |
| |
| source_boot = common.GetBootableImage( |
| "/tmp/boot.img", "boot.img", OPTIONS.source_tmp, "BOOT", |
| OPTIONS.source_info_dict) |
| target_boot = common.GetBootableImage( |
| "/tmp/boot.img", "boot.img", OPTIONS.target_tmp, "BOOT") |
| updating_boot = (not OPTIONS.two_step and |
| (source_boot.data != target_boot.data)) |
| |
| target_recovery = common.GetBootableImage( |
| "/tmp/recovery.img", "recovery.img", OPTIONS.target_tmp, "RECOVERY") |
| |
| system_src = GetImage("system", OPTIONS.source_tmp, OPTIONS.source_info_dict) |
| system_tgt = GetImage("system", OPTIONS.target_tmp, OPTIONS.target_info_dict) |
| |
| blockimgdiff_version = 1 |
| if OPTIONS.info_dict: |
| blockimgdiff_version = max( |
| int(i) for i in |
| OPTIONS.info_dict.get("blockimgdiff_versions", "1").split(",")) |
| |
| system_diff = common.BlockDifference("system", system_tgt, system_src, |
| version=blockimgdiff_version) |
| |
| if HasVendorPartition(target_zip): |
| if not HasVendorPartition(source_zip): |
| raise RuntimeError("can't generate incremental that adds /vendor") |
| vendor_src = GetImage("vendor", OPTIONS.source_tmp, |
| OPTIONS.source_info_dict) |
| vendor_tgt = GetImage("vendor", OPTIONS.target_tmp, |
| OPTIONS.target_info_dict) |
| vendor_diff = common.BlockDifference("vendor", vendor_tgt, vendor_src, |
| version=blockimgdiff_version) |
| else: |
| vendor_diff = None |
| |
| AppendAssertions(script, OPTIONS.target_info_dict, oem_dict) |
| device_specific.IncrementalOTA_Assertions() |
| |
| # Two-step incremental package strategy (in chronological order, |
| # which is *not* the order in which the generated script has |
| # things): |
| # |
| # if stage is not "2/3" or "3/3": |
| # do verification on current system |
| # write recovery image to boot partition |
| # set stage to "2/3" |
| # reboot to boot partition and restart recovery |
| # else if stage is "2/3": |
| # write recovery image to recovery partition |
| # set stage to "3/3" |
| # reboot to recovery partition and restart recovery |
| # else: |
| # (stage must be "3/3") |
| # perform update: |
| # patch system files, etc. |
| # force full install of new boot image |
| # set up system to update recovery partition on first boot |
| # complete script normally |
| # (allow recovery to mark itself finished and reboot) |
| |
| if OPTIONS.two_step: |
| if not OPTIONS.source_info_dict.get("multistage_support", None): |
| assert False, "two-step packages not supported by this build" |
| fs = OPTIONS.source_info_dict["fstab"]["/misc"] |
| assert fs.fs_type.upper() == "EMMC", \ |
| "two-step packages only supported on devices with EMMC /misc partitions" |
| bcb_dev = {"bcb_dev": fs.device} |
| common.ZipWriteStr(output_zip, "recovery.img", target_recovery.data) |
| script.AppendExtra(""" |
| if get_stage("%(bcb_dev)s") == "2/3" then |
| """ % bcb_dev) |
| script.AppendExtra("sleep(20);\n") |
| script.WriteRawImage("/recovery", "recovery.img") |
| script.AppendExtra(""" |
| set_stage("%(bcb_dev)s", "3/3"); |
| reboot_now("%(bcb_dev)s", "recovery"); |
| else if get_stage("%(bcb_dev)s") != "3/3" then |
| """ % bcb_dev) |
| |
| # Dump fingerprints |
| script.Print("Source: %s" % CalculateFingerprint( |
| oem_props, oem_dict, OPTIONS.source_info_dict)) |
| script.Print("Target: %s" % CalculateFingerprint( |
| oem_props, oem_dict, OPTIONS.target_info_dict)) |
| |
| script.Print("Verifying current system...") |
| |
| device_specific.IncrementalOTA_VerifyBegin() |
| |
| if oem_props is None: |
| # When blockimgdiff version is less than 3 (non-resumable block-based OTA), |
| # patching on a device that's already on the target build will damage the |
| # system. Because operations like move don't check the block state, they |
| # always apply the changes unconditionally. |
| if blockimgdiff_version <= 2: |
| script.AssertSomeFingerprint(source_fp) |
| else: |
| script.AssertSomeFingerprint(source_fp, target_fp) |
| else: |
| if blockimgdiff_version <= 2: |
| script.AssertSomeThumbprint( |
| GetBuildProp("ro.build.thumbprint", OPTIONS.source_info_dict)) |
| else: |
| script.AssertSomeThumbprint( |
| GetBuildProp("ro.build.thumbprint", OPTIONS.target_info_dict), |
| GetBuildProp("ro.build.thumbprint", OPTIONS.source_info_dict)) |
| |
| if updating_boot: |
| boot_type, boot_device = common.GetTypeAndDevice( |
| "/boot", OPTIONS.source_info_dict) |
| d = common.Difference(target_boot, source_boot) |
| _, _, d = d.ComputePatch() |
| if d is None: |
| include_full_boot = True |
| common.ZipWriteStr(output_zip, "boot.img", target_boot.data) |
| else: |
| include_full_boot = False |
| |
| print "boot target: %d source: %d diff: %d" % ( |
| target_boot.size, source_boot.size, len(d)) |
| |
| common.ZipWriteStr(output_zip, "patch/boot.img.p", d) |
| |
| script.PatchCheck("%s:%s:%d:%s:%d:%s" % |
| (boot_type, boot_device, |
| source_boot.size, source_boot.sha1, |
| target_boot.size, target_boot.sha1)) |
| |
| device_specific.IncrementalOTA_VerifyEnd() |
| |
| if OPTIONS.two_step: |
| script.WriteRawImage("/boot", "recovery.img") |
| script.AppendExtra(""" |
| set_stage("%(bcb_dev)s", "2/3"); |
| reboot_now("%(bcb_dev)s", ""); |
| else |
| """ % bcb_dev) |
| |
| # Verify the existing partitions. |
| system_diff.WriteVerifyScript(script) |
| if vendor_diff: |
| vendor_diff.WriteVerifyScript(script) |
| |
| script.Comment("---- start making changes here ----") |
| |
| device_specific.IncrementalOTA_InstallBegin() |
| |
| system_diff.WriteScript(script, output_zip, |
| progress=0.8 if vendor_diff else 0.9) |
| |
| if vendor_diff: |
| vendor_diff.WriteScript(script, output_zip, progress=0.1) |
| |
| if OPTIONS.two_step: |
| common.ZipWriteStr(output_zip, "boot.img", target_boot.data) |
| script.WriteRawImage("/boot", "boot.img") |
| print "writing full boot image (forced by two-step mode)" |
| |
| if not OPTIONS.two_step: |
| if updating_boot: |
| if include_full_boot: |
| print "boot image changed; including full." |
| script.Print("Installing boot image...") |
| script.WriteRawImage("/boot", "boot.img") |
| else: |
| # Produce the boot image by applying a patch to the current |
| # contents of the boot partition, and write it back to the |
| # partition. |
| print "boot image changed; including patch." |
| script.Print("Patching boot image...") |
| script.ShowProgress(0.1, 10) |
| script.ApplyPatch("%s:%s:%d:%s:%d:%s" |
| % (boot_type, boot_device, |
| source_boot.size, source_boot.sha1, |
| target_boot.size, target_boot.sha1), |
| "-", |
| target_boot.size, target_boot.sha1, |
| source_boot.sha1, "patch/boot.img.p") |
| else: |
| print "boot image unchanged; skipping." |
| |
| # Do device-specific installation (eg, write radio image). |
| device_specific.IncrementalOTA_InstallEnd() |
| |
| if OPTIONS.extra_script is not None: |
| script.AppendExtra(OPTIONS.extra_script) |
| |
| if OPTIONS.wipe_user_data: |
| script.Print("Erasing user data...") |
| script.FormatPartition("/data") |
| |
| if OPTIONS.two_step: |
| script.AppendExtra(""" |
| set_stage("%(bcb_dev)s", ""); |
| endif; |
| endif; |
| """ % bcb_dev) |
| |
| script.SetProgress(1) |
| script.AddToZip(target_zip, output_zip, input_path=OPTIONS.updater_binary) |
| WriteMetadata(metadata, output_zip) |
| |
| |
| class FileDifference(object): |
| def __init__(self, partition, source_zip, target_zip, output_zip): |
| self.deferred_patch_list = None |
| print "Loading target..." |
| self.target_data = target_data = LoadPartitionFiles(target_zip, partition) |
| print "Loading source..." |
| self.source_data = source_data = LoadPartitionFiles(source_zip, partition) |
| |
| self.verbatim_targets = verbatim_targets = [] |
| self.patch_list = patch_list = [] |
| diffs = [] |
| self.renames = renames = {} |
| known_paths = set() |
| largest_source_size = 0 |
| |
| matching_file_cache = {} |
| for fn, sf in source_data.items(): |
| assert fn == sf.name |
| matching_file_cache["path:" + fn] = sf |
| if fn in target_data.keys(): |
| AddToKnownPaths(fn, known_paths) |
| # Only allow eligibility for filename/sha matching |
| # if there isn't a perfect path match. |
| if target_data.get(sf.name) is None: |
| matching_file_cache["file:" + fn.split("/")[-1]] = sf |
| matching_file_cache["sha:" + sf.sha1] = sf |
| |
| for fn in sorted(target_data.keys()): |
| tf = target_data[fn] |
| assert fn == tf.name |
| sf = ClosestFileMatch(tf, matching_file_cache, renames) |
| if sf is not None and sf.name != tf.name: |
| print "File has moved from " + sf.name + " to " + tf.name |
| renames[sf.name] = tf |
| |
| if sf is None or fn in OPTIONS.require_verbatim: |
| # This file should be included verbatim |
| if fn in OPTIONS.prohibit_verbatim: |
| raise common.ExternalError("\"%s\" must be sent verbatim" % (fn,)) |
| print "send", fn, "verbatim" |
| tf.AddToZip(output_zip) |
| verbatim_targets.append((fn, tf.size, tf.sha1)) |
| if fn in target_data.keys(): |
| AddToKnownPaths(fn, known_paths) |
| elif tf.sha1 != sf.sha1: |
| # File is different; consider sending as a patch |
| diffs.append(common.Difference(tf, sf)) |
| else: |
| # Target file data identical to source (may still be renamed) |
| pass |
| |
| common.ComputeDifferences(diffs) |
| |
| for diff in diffs: |
| tf, sf, d = diff.GetPatch() |
| path = "/".join(tf.name.split("/")[:-1]) |
| if d is None or len(d) > tf.size * OPTIONS.patch_threshold or \ |
| path not in known_paths: |
| # patch is almost as big as the file; don't bother patching |
| # or a patch + rename cannot take place due to the target |
| # directory not existing |
| tf.AddToZip(output_zip) |
| verbatim_targets.append((tf.name, tf.size, tf.sha1)) |
| if sf.name in renames: |
| del renames[sf.name] |
| AddToKnownPaths(tf.name, known_paths) |
| else: |
| common.ZipWriteStr(output_zip, "patch/" + sf.name + ".p", d) |
| patch_list.append((tf, sf, tf.size, common.sha1(d).hexdigest())) |
| largest_source_size = max(largest_source_size, sf.size) |
| |
| self.largest_source_size = largest_source_size |
| |
| def EmitVerification(self, script): |
| so_far = 0 |
| for tf, sf, _, _ in self.patch_list: |
| if tf.name != sf.name: |
| script.SkipNextActionIfTargetExists(tf.name, tf.sha1) |
| script.PatchCheck("/"+sf.name, tf.sha1, sf.sha1) |
| so_far += sf.size |
| return so_far |
| |
| def EmitExplicitTargetVerification(self, script): |
| for fn, _, sha1 in self.verbatim_targets: |
| if fn[-1] != "/": |
| script.FileCheck("/"+fn, sha1) |
| for tf, _, _, _ in self.patch_list: |
| script.FileCheck(tf.name, tf.sha1) |
| |
| def RemoveUnneededFiles(self, script, extras=()): |
| script.DeleteFiles( |
| ["/" + i[0] for i in self.verbatim_targets] + |
| ["/" + i for i in sorted(self.source_data) |
| if i not in self.target_data and i not in self.renames] + |
| list(extras)) |
| |
| def TotalPatchSize(self): |
| return sum(i[1].size for i in self.patch_list) |
| |
| def EmitPatches(self, script, total_patch_size, so_far): |
| self.deferred_patch_list = deferred_patch_list = [] |
| for item in self.patch_list: |
| tf, sf, _, _ = item |
| if tf.name == "system/build.prop": |
| deferred_patch_list.append(item) |
| continue |
| if sf.name != tf.name: |
| script.SkipNextActionIfTargetExists(tf.name, tf.sha1) |
| script.ApplyPatch("/" + sf.name, "-", tf.size, tf.sha1, sf.sha1, |
| "patch/" + sf.name + ".p") |
| so_far += tf.size |
| script.SetProgress(so_far / total_patch_size) |
| return so_far |
| |
| def EmitDeferredPatches(self, script): |
| for item in self.deferred_patch_list: |
| tf, sf, _, _ = item |
| script.ApplyPatch("/"+sf.name, "-", tf.size, tf.sha1, sf.sha1, |
| "patch/" + sf.name + ".p") |
| script.SetPermissions("/system/build.prop", 0, 0, 0o644, None, None) |
| |
| def EmitRenames(self, script): |
| if len(self.renames) > 0: |
| script.Print("Renaming files...") |
| for src, tgt in self.renames.iteritems(): |
| print "Renaming " + src + " to " + tgt.name |
| script.RenameFile(src, tgt.name) |
| |
| |
| def WriteIncrementalOTAPackage(target_zip, source_zip, output_zip): |
| target_has_recovery_patch = HasRecoveryPatch(target_zip) |
| source_has_recovery_patch = HasRecoveryPatch(source_zip) |
| |
| if (OPTIONS.block_based and |
| target_has_recovery_patch and |
| source_has_recovery_patch): |
| return WriteBlockIncrementalOTAPackage(target_zip, source_zip, output_zip) |
| |
| source_version = OPTIONS.source_info_dict["recovery_api_version"] |
| target_version = OPTIONS.target_info_dict["recovery_api_version"] |
| |
| if source_version == 0: |
| print ("WARNING: generating edify script for a source that " |
| "can't install it.") |
| script = edify_generator.EdifyGenerator( |
| source_version, OPTIONS.target_info_dict, |
| fstab=OPTIONS.source_info_dict["fstab"]) |
| |
| oem_props = OPTIONS.info_dict.get("oem_fingerprint_properties") |
| recovery_mount_options = OPTIONS.source_info_dict.get( |
| "recovery_mount_options") |
| oem_dict = None |
| if oem_props is not None and len(oem_props) > 0: |
| if OPTIONS.oem_source is None: |
| raise common.ExternalError("OEM source required for this build") |
| script.Mount("/oem", recovery_mount_options) |
| oem_dict = common.LoadDictionaryFromLines( |
| open(OPTIONS.oem_source).readlines()) |
| |
| metadata = { |
| "pre-device": GetOemProperty("ro.product.device", oem_props, oem_dict, |
| OPTIONS.source_info_dict), |
| "post-timestamp": GetBuildProp("ro.build.date.utc", |
| OPTIONS.target_info_dict), |
| } |
| |
| device_specific = common.DeviceSpecificParams( |
| source_zip=source_zip, |
| source_version=source_version, |
| target_zip=target_zip, |
| target_version=target_version, |
| output_zip=output_zip, |
| script=script, |
| metadata=metadata, |
| info_dict=OPTIONS.info_dict) |
| |
| system_diff = FileDifference("system", source_zip, target_zip, output_zip) |
| script.Mount("/system", recovery_mount_options) |
| if HasVendorPartition(target_zip): |
| vendor_diff = FileDifference("vendor", source_zip, target_zip, output_zip) |
| script.Mount("/vendor", recovery_mount_options) |
| else: |
| vendor_diff = None |
| |
| target_fp = CalculateFingerprint(oem_props, oem_dict, |
| OPTIONS.target_info_dict) |
| source_fp = CalculateFingerprint(oem_props, oem_dict, |
| OPTIONS.source_info_dict) |
| |
| if oem_props is None: |
| script.AssertSomeFingerprint(source_fp, target_fp) |
| else: |
| script.AssertSomeThumbprint( |
| GetBuildProp("ro.build.thumbprint", OPTIONS.target_info_dict), |
| GetBuildProp("ro.build.thumbprint", OPTIONS.source_info_dict)) |
| |
| metadata["pre-build"] = source_fp |
| metadata["post-build"] = target_fp |
| |
| source_boot = common.GetBootableImage( |
| "/tmp/boot.img", "boot.img", OPTIONS.source_tmp, "BOOT", |
| OPTIONS.source_info_dict) |
| target_boot = common.GetBootableImage( |
| "/tmp/boot.img", "boot.img", OPTIONS.target_tmp, "BOOT") |
| updating_boot = (not OPTIONS.two_step and |
| (source_boot.data != target_boot.data)) |
| |
| source_recovery = common.GetBootableImage( |
| "/tmp/recovery.img", "recovery.img", OPTIONS.source_tmp, "RECOVERY", |
| OPTIONS.source_info_dict) |
| target_recovery = common.GetBootableImage( |
| "/tmp/recovery.img", "recovery.img", OPTIONS.target_tmp, "RECOVERY") |
| updating_recovery = (source_recovery.data != target_recovery.data) |
| |
| # Here's how we divide up the progress bar: |
| # 0.1 for verifying the start state (PatchCheck calls) |
| # 0.8 for applying patches (ApplyPatch calls) |
| # 0.1 for unpacking verbatim files, symlinking, and doing the |
| # device-specific commands. |
| |
| AppendAssertions(script, OPTIONS.target_info_dict, oem_dict) |
| device_specific.IncrementalOTA_Assertions() |
| |
| # Two-step incremental package strategy (in chronological order, |
| # which is *not* the order in which the generated script has |
| # things): |
| # |
| # if stage is not "2/3" or "3/3": |
| # do verification on current system |
| # write recovery image to boot partition |
| # set stage to "2/3" |
| # reboot to boot partition and restart recovery |
| # else if stage is "2/3": |
| # write recovery image to recovery partition |
| # set stage to "3/3" |
| # reboot to recovery partition and restart recovery |
| # else: |
| # (stage must be "3/3") |
| # perform update: |
| # patch system files, etc. |
| # force full install of new boot image |
| # set up system to update recovery partition on first boot |
| # complete script normally |
| # (allow recovery to mark itself finished and reboot) |
| |
| if OPTIONS.two_step: |
| if not OPTIONS.source_info_dict.get("multistage_support", None): |
| assert False, "two-step packages not supported by this build" |
| fs = OPTIONS.source_info_dict["fstab"]["/misc"] |
| assert fs.fs_type.upper() == "EMMC", \ |
| "two-step packages only supported on devices with EMMC /misc partitions" |
| bcb_dev = {"bcb_dev": fs.device} |
| common.ZipWriteStr(output_zip, "recovery.img", target_recovery.data) |
| script.AppendExtra(""" |
| if get_stage("%(bcb_dev)s") == "2/3" then |
| """ % bcb_dev) |
| script.AppendExtra("sleep(20);\n") |
| script.WriteRawImage("/recovery", "recovery.img") |
| script.AppendExtra(""" |
| set_stage("%(bcb_dev)s", "3/3"); |
| reboot_now("%(bcb_dev)s", "recovery"); |
| else if get_stage("%(bcb_dev)s") != "3/3" then |
| """ % bcb_dev) |
| |
| # Dump fingerprints |
| script.Print("Source: %s" % (source_fp,)) |
| script.Print("Target: %s" % (target_fp,)) |
| |
| script.Print("Verifying current system...") |
| |
| device_specific.IncrementalOTA_VerifyBegin() |
| |
| script.ShowProgress(0.1, 0) |
| so_far = system_diff.EmitVerification(script) |
| if vendor_diff: |
| so_far += vendor_diff.EmitVerification(script) |
| |
| if updating_boot: |
| d = common.Difference(target_boot, source_boot) |
| _, _, d = d.ComputePatch() |
| print "boot target: %d source: %d diff: %d" % ( |
| target_boot.size, source_boot.size, len(d)) |
| |
| common.ZipWriteStr(output_zip, "patch/boot.img.p", d) |
| |
| boot_type, boot_device = common.GetTypeAndDevice( |
| "/boot", OPTIONS.source_info_dict) |
| |
| script.PatchCheck("%s:%s:%d:%s:%d:%s" % |
| (boot_type, boot_device, |
| source_boot.size, source_boot.sha1, |
| target_boot.size, target_boot.sha1)) |
| so_far += source_boot.size |
| |
| size = [] |
| if system_diff.patch_list: |
| size.append(system_diff.largest_source_size) |
| if vendor_diff: |
| if vendor_diff.patch_list: |
| size.append(vendor_diff.largest_source_size) |
| if size or updating_recovery or updating_boot: |
| script.CacheFreeSpaceCheck(max(size)) |
| |
| device_specific.IncrementalOTA_VerifyEnd() |
| |
| if OPTIONS.two_step: |
| script.WriteRawImage("/boot", "recovery.img") |
| script.AppendExtra(""" |
| set_stage("%(bcb_dev)s", "2/3"); |
| reboot_now("%(bcb_dev)s", ""); |
| else |
| """ % bcb_dev) |
| |
| script.Comment("---- start making changes here ----") |
| |
| device_specific.IncrementalOTA_InstallBegin() |
| |
| if OPTIONS.two_step: |
| common.ZipWriteStr(output_zip, "boot.img", target_boot.data) |
| script.WriteRawImage("/boot", "boot.img") |
| print "writing full boot image (forced by two-step mode)" |
| |
| script.Print("Removing unneeded files...") |
| system_diff.RemoveUnneededFiles(script, ("/system/recovery.img",)) |
| if vendor_diff: |
| vendor_diff.RemoveUnneededFiles(script) |
| |
| script.ShowProgress(0.8, 0) |
| total_patch_size = 1.0 + system_diff.TotalPatchSize() |
| if vendor_diff: |
| total_patch_size += vendor_diff.TotalPatchSize() |
| if updating_boot: |
| total_patch_size += target_boot.size |
| |
| script.Print("Patching system files...") |
| so_far = system_diff.EmitPatches(script, total_patch_size, 0) |
| if vendor_diff: |
| script.Print("Patching vendor files...") |
| so_far = vendor_diff.EmitPatches(script, total_patch_size, so_far) |
| |
| if not OPTIONS.two_step: |
| if updating_boot: |
| # Produce the boot image by applying a patch to the current |
| # contents of the boot partition, and write it back to the |
| # partition. |
| script.Print("Patching boot image...") |
| script.ApplyPatch("%s:%s:%d:%s:%d:%s" |
| % (boot_type, boot_device, |
| source_boot.size, source_boot.sha1, |
| target_boot.size, target_boot.sha1), |
| "-", |
| target_boot.size, target_boot.sha1, |
| source_boot.sha1, "patch/boot.img.p") |
| so_far += target_boot.size |
| script.SetProgress(so_far / total_patch_size) |
| print "boot image changed; including." |
| else: |
| print "boot image unchanged; skipping." |
| |
| system_items = ItemSet("system", "META/filesystem_config.txt") |
| if vendor_diff: |
| vendor_items = ItemSet("vendor", "META/vendor_filesystem_config.txt") |
| |
| if updating_recovery: |
| # Recovery is generated as a patch using both the boot image |
| # (which contains the same linux kernel as recovery) and the file |
| # /system/etc/recovery-resource.dat (which contains all the images |
| # used in the recovery UI) as sources. This lets us minimize the |
| # size of the patch, which must be included in every OTA package. |
| # |
| # For older builds where recovery-resource.dat is not present, we |
| # use only the boot image as the source. |
| |
| if not target_has_recovery_patch: |
| def output_sink(fn, data): |
| common.ZipWriteStr(output_zip, "recovery/" + fn, data) |
| system_items.Get("system/" + fn) |
| |
| common.MakeRecoveryPatch(OPTIONS.target_tmp, output_sink, |
| target_recovery, target_boot) |
| script.DeleteFiles(["/system/recovery-from-boot.p", |
| "/system/etc/recovery.img", |
| "/system/etc/install-recovery.sh"]) |
| print "recovery image changed; including as patch from boot." |
| else: |
| print "recovery image unchanged; skipping." |
| |
| script.ShowProgress(0.1, 10) |
| |
| target_symlinks = CopyPartitionFiles(system_items, target_zip, None) |
| if vendor_diff: |
| target_symlinks.extend(CopyPartitionFiles(vendor_items, target_zip, None)) |
| |
| temp_script = script.MakeTemporary() |
| system_items.GetMetadata(target_zip) |
| system_items.Get("system").SetPermissions(temp_script) |
| if vendor_diff: |
| vendor_items.GetMetadata(target_zip) |
| vendor_items.Get("vendor").SetPermissions(temp_script) |
| |
| # Note that this call will mess up the trees of Items, so make sure |
| # we're done with them. |
| source_symlinks = CopyPartitionFiles(system_items, source_zip, None) |
| if vendor_diff: |
| source_symlinks.extend(CopyPartitionFiles(vendor_items, source_zip, None)) |
| |
| target_symlinks_d = dict([(i[1], i[0]) for i in target_symlinks]) |
| source_symlinks_d = dict([(i[1], i[0]) for i in source_symlinks]) |
| |
| # Delete all the symlinks in source that aren't in target. This |
| # needs to happen before verbatim files are unpacked, in case a |
| # symlink in the source is replaced by a real file in the target. |
| to_delete = [] |
| for dest, link in source_symlinks: |
| if link not in target_symlinks_d: |
| to_delete.append(link) |
| script.DeleteFiles(to_delete) |
| |
| if system_diff.verbatim_targets: |
| script.Print("Unpacking new system files...") |
| script.UnpackPackageDir("system", "/system") |
| if vendor_diff and vendor_diff.verbatim_targets: |
| script.Print("Unpacking new vendor files...") |
| script.UnpackPackageDir("vendor", "/vendor") |
| |
| if updating_recovery and not target_has_recovery_patch: |
| script.Print("Unpacking new recovery...") |
| script.UnpackPackageDir("recovery", "/system") |
| |
| system_diff.EmitRenames(script) |
| if vendor_diff: |
| vendor_diff.EmitRenames(script) |
| |
| script.Print("Symlinks and permissions...") |
| |
| # Create all the symlinks that don't already exist, or point to |
| # somewhere different than what we want. Delete each symlink before |
| # creating it, since the 'symlink' command won't overwrite. |
| to_create = [] |
| for dest, link in target_symlinks: |
| if link in source_symlinks_d: |
| if dest != source_symlinks_d[link]: |
| to_create.append((dest, link)) |
| else: |
| to_create.append((dest, link)) |
| script.DeleteFiles([i[1] for i in to_create]) |
| script.MakeSymlinks(to_create) |
| |
| # Now that the symlinks are created, we can set all the |
| # permissions. |
| script.AppendScript(temp_script) |
| |
| # Do device-specific installation (eg, write radio image). |
| device_specific.IncrementalOTA_InstallEnd() |
| |
| if OPTIONS.extra_script is not None: |
| script.AppendExtra(OPTIONS.extra_script) |
| |
| # Patch the build.prop file last, so if something fails but the |
| # device can still come up, it appears to be the old build and will |
| # get set the OTA package again to retry. |
| script.Print("Patching remaining system files...") |
| system_diff.EmitDeferredPatches(script) |
| |
| if OPTIONS.wipe_user_data: |
| script.Print("Erasing user data...") |
| script.FormatPartition("/data") |
| |
| if OPTIONS.two_step: |
| script.AppendExtra(""" |
| set_stage("%(bcb_dev)s", ""); |
| endif; |
| endif; |
| """ % bcb_dev) |
| |
| if OPTIONS.verify and system_diff: |
| script.Print("Remounting and verifying system partition files...") |
| script.Unmount("/system") |
| script.Mount("/system") |
| system_diff.EmitExplicitTargetVerification(script) |
| |
| if OPTIONS.verify and vendor_diff: |
| script.Print("Remounting and verifying vendor partition files...") |
| script.Unmount("/vendor") |
| script.Mount("/vendor") |
| vendor_diff.EmitExplicitTargetVerification(script) |
| script.AddToZip(target_zip, output_zip, input_path=OPTIONS.updater_binary) |
| |
| WriteMetadata(metadata, output_zip) |
| |
| |
| def main(argv): |
| |
| def option_handler(o, a): |
| if o == "--board_config": |
| pass # deprecated |
| elif o in ("-k", "--package_key"): |
| OPTIONS.package_key = a |
| elif o in ("-i", "--incremental_from"): |
| OPTIONS.incremental_source = a |
| elif o == "--full_radio": |
| OPTIONS.full_radio = True |
| elif o in ("-w", "--wipe_user_data"): |
| OPTIONS.wipe_user_data = True |
| elif o in ("-n", "--no_prereq"): |
| OPTIONS.omit_prereq = True |
| elif o in ("-o", "--oem_settings"): |
| OPTIONS.oem_source = a |
| elif o in ("-e", "--extra_script"): |
| OPTIONS.extra_script = a |
| elif o in ("-a", "--aslr_mode"): |
| if a in ("on", "On", "true", "True", "yes", "Yes"): |
| OPTIONS.aslr_mode = True |
| else: |
| OPTIONS.aslr_mode = False |
| elif o in ("-t", "--worker_threads"): |
| if a.isdigit(): |
| OPTIONS.worker_threads = int(a) |
| else: |
| raise ValueError("Cannot parse value %r for option %r - only " |
| "integers are allowed." % (a, o)) |
| elif o in ("-2", "--two_step"): |
| OPTIONS.two_step = True |
| elif o == "--no_signing": |
| OPTIONS.no_signing = True |
| elif o == "--verify": |
| OPTIONS.verify = True |
| elif o == "--block": |
| OPTIONS.block_based = True |
| elif o in ("-b", "--binary"): |
| OPTIONS.updater_binary = a |
| elif o in ("--no_fallback_to_full",): |
| OPTIONS.fallback_to_full = False |
| elif o == "--stash_threshold": |
| try: |
| OPTIONS.stash_threshold = float(a) |
| except ValueError: |
| raise ValueError("Cannot parse value %r for option %r - expecting " |
| "a float" % (a, o)) |
| else: |
| return False |
| return True |
| |
| args = common.ParseOptions(argv, __doc__, |
| extra_opts="b:k:i:d:wne:t:a:2o:", |
| extra_long_opts=[ |
| "board_config=", |
| "package_key=", |
| "incremental_from=", |
| "full_radio", |
| "wipe_user_data", |
| "no_prereq", |
| "extra_script=", |
| "worker_threads=", |
| "aslr_mode=", |
| "two_step", |
| "no_signing", |
| "block", |
| "binary=", |
| "oem_settings=", |
| "verify", |
| "no_fallback_to_full", |
| "stash_threshold=", |
| ], extra_option_handler=option_handler) |
| |
| if len(args) != 2: |
| common.Usage(__doc__) |
| sys.exit(1) |
| |
| if OPTIONS.extra_script is not None: |
| OPTIONS.extra_script = open(OPTIONS.extra_script).read() |
| |
| print "unzipping target target-files..." |
| OPTIONS.input_tmp, input_zip = common.UnzipTemp(args[0]) |
| |
| OPTIONS.target_tmp = OPTIONS.input_tmp |
| OPTIONS.info_dict = common.LoadInfoDict(input_zip, OPTIONS.target_tmp) |
| |
| if OPTIONS.verbose: |
| print "--- target info ---" |
| common.DumpInfoDict(OPTIONS.info_dict) |
| |
| # If the caller explicitly specified the device-specific extensions |
| # path via -s/--device_specific, use that. Otherwise, use |
| # META/releasetools.py if it is present in the target target_files. |
| # Otherwise, take the path of the file from 'tool_extensions' in the |
| # info dict and look for that in the local filesystem, relative to |
| # the current directory. |
| |
| if OPTIONS.device_specific is None: |
| from_input = os.path.join(OPTIONS.input_tmp, "META", "releasetools.py") |
| if os.path.exists(from_input): |
| print "(using device-specific extensions from target_files)" |
| OPTIONS.device_specific = from_input |
| else: |
| OPTIONS.device_specific = OPTIONS.info_dict.get("tool_extensions", None) |
| |
| if OPTIONS.device_specific is not None: |
| OPTIONS.device_specific = os.path.abspath(OPTIONS.device_specific) |
| |
| while True: |
| |
| if OPTIONS.no_signing: |
| if os.path.exists(args[1]): |
| os.unlink(args[1]) |
| output_zip = zipfile.ZipFile(args[1], "w", |
| compression=zipfile.ZIP_DEFLATED) |
| else: |
| temp_zip_file = tempfile.NamedTemporaryFile() |
| output_zip = zipfile.ZipFile(temp_zip_file, "w", |
| compression=zipfile.ZIP_DEFLATED) |
| |
| cache_size = OPTIONS.info_dict.get("cache_size", None) |
| if cache_size is None: |
| print "--- can't determine the cache partition size ---" |
| OPTIONS.cache_size = cache_size |
| |
| if OPTIONS.incremental_source is None: |
| WriteFullOTAPackage(input_zip, output_zip) |
| if OPTIONS.package_key is None: |
| OPTIONS.package_key = OPTIONS.info_dict.get( |
| "default_system_dev_certificate", |
| "build/target/product/security/testkey") |
| common.ZipClose(output_zip) |
| break |
| |
| else: |
| print "unzipping source target-files..." |
| OPTIONS.source_tmp, source_zip = common.UnzipTemp( |
| OPTIONS.incremental_source) |
| OPTIONS.target_info_dict = OPTIONS.info_dict |
| OPTIONS.source_info_dict = common.LoadInfoDict(source_zip, |
| OPTIONS.source_tmp) |
| if OPTIONS.package_key is None: |
| OPTIONS.package_key = OPTIONS.source_info_dict.get( |
| "default_system_dev_certificate", |
| "build/target/product/security/testkey") |
| if OPTIONS.verbose: |
| print "--- source info ---" |
| common.DumpInfoDict(OPTIONS.source_info_dict) |
| try: |
| WriteIncrementalOTAPackage(input_zip, source_zip, output_zip) |
| common.ZipClose(output_zip) |
| break |
| except ValueError: |
| if not OPTIONS.fallback_to_full: |
| raise |
| print "--- failed to build incremental; falling back to full ---" |
| OPTIONS.incremental_source = None |
| common.ZipClose(output_zip) |
| |
| if not OPTIONS.no_signing: |
| SignOutput(temp_zip_file.name, args[1]) |
| temp_zip_file.close() |
| |
| print "done." |
| |
| |
| if __name__ == '__main__': |
| try: |
| common.CloseInheritedPipes() |
| main(sys.argv[1:]) |
| except common.ExternalError as e: |
| print |
| print " ERROR: %s" % (e,) |
| print |
| sys.exit(1) |
| finally: |
| common.Cleanup() |