CleanSpec.mk - platform/build - Gitiles

 # Copyright (C) 2007 The Android Open Source Project
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 #      http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
 #

 # If you don't need to do a full clean build but would like to touch
 # a file or delete some intermediate files, add a clean step to the end
 # of the list.  These steps will only be run once, if they haven't been
 # run before.
 #
 # E.g.:
 #     $(call add-clean-step, touch -c external/sqlite/sqlite3.h)
 #     $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES/libz_intermediates)
 #
 # Always use "touch -c" and "rm -f" or "rm -rf" to gracefully deal with
 # files that are missing or have been moved.
 #
 # Use $(PRODUCT_OUT) to get to the "out/target/product/blah/" directory.
 # Use $(OUT_DIR) to refer to the "out" directory.
 #
 # If you need to re-do something that's already mentioned, just copy
 # the command and add it to the bottom of the list.  E.g., if a change
 # that you made last week required touching a file and a change you
 # made today requires touching the same file, just copy the old
 # touch step and add it to the end of the list.
 #
 # ************************************************
 # NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST
 # ************************************************

 # For example:
 #$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS/AndroidTests_intermediates)
 #$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/core_intermediates)
 #$(call add-clean-step, find $(OUT_DIR) -type f -name "IGTalkSession*" -print0 | xargs -0 rm -f)
 #$(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/*)

 $(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system)

 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/libmediaplayerservice_intermediates)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/libmedia_jni_intermediates)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/libstagefright_omx_intermediates)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/default.prop)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/recovery/root/default.prop)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/vendor)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/android-info.txt)
 $(call add-clean-step, find $(PRODUCT_OUT) -name "*.apk" | xargs rm)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/app/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/*/LINKED)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/lib/*.so)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib/*.so)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/symbols/system/lib/*.so)
 $(call add-clean-step, rm -rf $(HOST_OUT_EXECUTABLES)/iself)
 $(call add-clean-step, rm -rf $(HOST_OUT_EXECUTABLES)/lsd)
 $(call add-clean-step, rm -rf $(HOST_OUT_EXECUTABLES)/apriori)
 $(call add-clean-step, rm -rf $(HOST_OUT_EXECUTABLES)/isprelinked)
 $(call add-clean-step, rm -rf $(HOST_OUT_EXECUTABLES)/soslim)

 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/lib/*.so)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib/*.so)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/symbols/system/lib/*.so)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/YouTube*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)

 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/libstagefright_intermediates)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/libstagefright_omx_intermediates)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/librtp_jni_intermediates)

 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/android-info.txt)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/app/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/JAVA_LIBRARIES/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/framework/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/libbcinfo_intermediates)

 # ICS MR2!!!!!!!!!!!!
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/libbcinfo_intermediates)

 # WAIT, I MEAN JELLY BEAN!!!!!!!!!!!!
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)

 # Changing where ro.carrier value is instantiated for system/build.prop
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)

 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/app/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)

 # Now we switched to build against Mac OS X SDK 10.6
 $(call add-clean-step, rm -rf $(OUT_DIR)/host/darwin-x86/obj)

 $(call add-clean-step, rm -f $(OUT_DIR)/versions_checked.mk)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)

 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/EXECUTABLES)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/lib/*.o)

 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/EXECUTABLES)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/lib/*.o)

 # JB MR2!!!!!!!  AND *NO*, THIS WILL NOT BE K-WHATEVER.
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)

 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)

 # Start of "K" development!
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)

 # GCC 4.7
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/EXECUTABLES)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/lib/*.o)

 # Wait, back to some JB development!
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)

 # And on to KLP...
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)

 # KLP now based off API 18.
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)

 # Clean up around the /system/app -> /system/priv-app migration
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)

 # Clean up old location of generated Java files from aidl
 $(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/framework_intermediates/src)

 # Clean up ApplicationsProvider which is being removed.
 $(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS/ApplicationsProvider_intermediates)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/priv-app/ApplicationsProvider.apk)

 # Clean up Moto OMA DM client which isn't ready yet.
 $(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/com.android.omadm.plugin.dev_intermediates)
 $(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/com.android.omadm.plugin.diagmon_intermediates)
 $(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/com.android.omadm.pluginhelper_intermediates)
 $(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/com.android.omadm.plugin_intermediates)
 $(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/com.android.omadm.service.api_intermediates)
 $(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS/DMService_intermediates)
 $(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS/SprintDM_intermediates)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/priv-app/DMService.apk)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/SprintDM.apk)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/omadm)

 # GCC 4.8
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/EXECUTABLES)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/lib/*.o)

 # KLP I mean KitKat now API 19.
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)

 # 4.4.1
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)

 # 4.4.2
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)

 # "L" and beyond.
 # Make libart the default runtime
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)

 # Rename persist.sys.dalvik.vm.lib to allow new default
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)

 # KKWT development
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)

 # L development
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)

 # L development
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)

 # Add ro.product.cpu.abilist{32,64} to build.prop.
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)

 # Unset TARGET_PREFER_32_BIT_APPS for 64 bit targets.
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)

 # Adding dalvik.vm.dex2oat-flags to eng builds
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)

 # Unset TARGET_PREFER_32_BIT_APPS for 64 bit targets.
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)

 # Switching the x86 emulator over to a 64 bit primary zygote.
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/default.prop)

 # Rename persist.sys.dalvik.vm.lib.1 to allow new default
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)

 # Switching PRODUCT_RUNTIMES default for some devices
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)

 # Switching to 32-bit-by-default host multilib build
 $(call add-clean-step, rm -rf $(HOST_OUT_INTERMEDIATES))

 # KKWT has become API 20
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)

 # ims-common.jar added to BOOTCLASSPATH
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/ETC/init.environ.rc_intermediates)

 # Change ro.zygote for core_64_bit.mk from zygote32_64 to zygote64_32
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/default.prop)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/recovery/root/default.prop)

 # Adding dalvik.vm.dex2oat-Xms, dalvik.vm.dex2oat-Xmx
 # dalvik.vm.image-dex2oat-Xms, and dalvik.vm.image-dex2oat-Xmx
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/default.prop)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/recovery/root/default.prop)

 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system)

 # Switch host builds to Clang by default
 $(call add-clean-step, rm -rf $(OUT_DIR)/host)

 # Adding dalvik.vm.dex2oat-filter
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/default.prop)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/recovery/root/default.prop)

 # API 21?
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)

 # API 21!
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)

 # Move to libc++ as the default STL.
 $(call add-clean-step, rm -rf $(OUT_DIR))

 # dex2oat instruction-set changes
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/default.prop)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/recovery/root/default.prop)

 # Make GNU++11 the default standard version. This requires a cleanspec because
 # char16_t/char32_t will be real types now instead of typedefs, which means
 # an ABI change since the names will mangle differently.
 $(call add-clean-step, rm -rf $(OUT_DIR))

 # Remove ro.product.locale.language/country and add ro.product.locale
 # instead.
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)

 # ************************************************
 # NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST
 # ************************************************
	# Copyright (C) 2007 The Android Open Source Project
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	#

	# If you don't need to do a full clean build but would like to touch
	# a file or delete some intermediate files, add a clean step to the end
	# of the list. These steps will only be run once, if they haven't been
	# run before.
	#
	# E.g.:
	# $(call add-clean-step, touch -c external/sqlite/sqlite3.h)
	# $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES/libz_intermediates)
	#
	# Always use "touch -c" and "rm -f" or "rm -rf" to gracefully deal with
	# files that are missing or have been moved.
	#
	# Use $(PRODUCT_OUT) to get to the "out/target/product/blah/" directory.
	# Use $(OUT_DIR) to refer to the "out" directory.
	#
	# If you need to re-do something that's already mentioned, just copy
	# the command and add it to the bottom of the list. E.g., if a change
	# that you made last week required touching a file and a change you
	# made today requires touching the same file, just copy the old
	# touch step and add it to the end of the list.
	#
	# ************************************************
	# NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST
	# ************************************************

	# For example:
	#$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS/AndroidTests_intermediates)
	#$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/core_intermediates)
	#$(call add-clean-step, find $(OUT_DIR) -type f -name "IGTalkSession*" -print0 \| xargs -0 rm -f)
	#$(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/*)

	$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system)

	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/libmediaplayerservice_intermediates)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/libmedia_jni_intermediates)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/libstagefright_omx_intermediates)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/default.prop)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/recovery/root/default.prop)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/vendor)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/android-info.txt)
	$(call add-clean-step, find $(PRODUCT_OUT) -name "*.apk" \| xargs rm)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/app/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/*/LINKED)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/lib/*.so)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib/*.so)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/symbols/system/lib/*.so)
	$(call add-clean-step, rm -rf $(HOST_OUT_EXECUTABLES)/iself)
	$(call add-clean-step, rm -rf $(HOST_OUT_EXECUTABLES)/lsd)
	$(call add-clean-step, rm -rf $(HOST_OUT_EXECUTABLES)/apriori)
	$(call add-clean-step, rm -rf $(HOST_OUT_EXECUTABLES)/isprelinked)
	$(call add-clean-step, rm -rf $(HOST_OUT_EXECUTABLES)/soslim)

	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/lib/*.so)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib/*.so)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/symbols/system/lib/*.so)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/YouTube*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)

	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/libstagefright_intermediates)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/libstagefright_omx_intermediates)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/librtp_jni_intermediates)

	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/android-info.txt)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/app/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/JAVA_LIBRARIES/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/framework/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/libbcinfo_intermediates)

	# ICS MR2!!!!!!!!!!!!
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/libbcinfo_intermediates)

	# WAIT, I MEAN JELLY BEAN!!!!!!!!!!!!
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)

	# Changing where ro.carrier value is instantiated for system/build.prop
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)

	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/app/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)

	# Now we switched to build against Mac OS X SDK 10.6
	$(call add-clean-step, rm -rf $(OUT_DIR)/host/darwin-x86/obj)

	$(call add-clean-step, rm -f $(OUT_DIR)/versions_checked.mk)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)

	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/EXECUTABLES)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/lib/*.o)

	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/EXECUTABLES)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/lib/*.o)

	# JB MR2!!!!!!! AND NO, THIS WILL NOT BE K-WHATEVER.
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)

	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)

	# Start of "K" development!
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)

	# GCC 4.7
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/EXECUTABLES)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/lib/*.o)

	# Wait, back to some JB development!
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)

	# And on to KLP...
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)

	# KLP now based off API 18.
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)

	# Clean up around the /system/app -> /system/priv-app migration
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)

	# Clean up old location of generated Java files from aidl
	$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/framework_intermediates/src)

	# Clean up ApplicationsProvider which is being removed.
	$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS/ApplicationsProvider_intermediates)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/priv-app/ApplicationsProvider.apk)

	# Clean up Moto OMA DM client which isn't ready yet.
	$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/com.android.omadm.plugin.dev_intermediates)
	$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/com.android.omadm.plugin.diagmon_intermediates)
	$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/com.android.omadm.pluginhelper_intermediates)
	$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/com.android.omadm.plugin_intermediates)
	$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/com.android.omadm.service.api_intermediates)
	$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS/DMService_intermediates)
	$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS/SprintDM_intermediates)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/priv-app/DMService.apk)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/SprintDM.apk)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/omadm)

	# GCC 4.8
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/EXECUTABLES)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/lib/*.o)

	# KLP I mean KitKat now API 19.
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)

	# 4.4.1
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)

	# 4.4.2
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)

	# "L" and beyond.
	# Make libart the default runtime
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)

	# Rename persist.sys.dalvik.vm.lib to allow new default
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)

	# KKWT development
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)

	# L development
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)

	# L development
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)

	# Add ro.product.cpu.abilist{32,64} to build.prop.
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)

	# Unset TARGET_PREFER_32_BIT_APPS for 64 bit targets.
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)

	# Adding dalvik.vm.dex2oat-flags to eng builds
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)

	# Unset TARGET_PREFER_32_BIT_APPS for 64 bit targets.
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)

	# Switching the x86 emulator over to a 64 bit primary zygote.
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/default.prop)

	# Rename persist.sys.dalvik.vm.lib.1 to allow new default
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)

	# Switching PRODUCT_RUNTIMES default for some devices
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)

	# Switching to 32-bit-by-default host multilib build
	$(call add-clean-step, rm -rf $(HOST_OUT_INTERMEDIATES))

	# KKWT has become API 20
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)

	# ims-common.jar added to BOOTCLASSPATH
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/ETC/init.environ.rc_intermediates)

	# Change ro.zygote for core_64_bit.mk from zygote32_64 to zygote64_32
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/default.prop)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/recovery/root/default.prop)

	# Adding dalvik.vm.dex2oat-Xms, dalvik.vm.dex2oat-Xmx
	# dalvik.vm.image-dex2oat-Xms, and dalvik.vm.image-dex2oat-Xmx
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/default.prop)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/recovery/root/default.prop)

	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system)

	# Switch host builds to Clang by default
	$(call add-clean-step, rm -rf $(OUT_DIR)/host)

	# Adding dalvik.vm.dex2oat-filter
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/default.prop)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/recovery/root/default.prop)

	# API 21?
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)

	# API 21!
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/*)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)

	# Move to libc++ as the default STL.
	$(call add-clean-step, rm -rf $(OUT_DIR))

	# dex2oat instruction-set changes
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/default.prop)
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/recovery/root/default.prop)

	# Make GNU++11 the default standard version. This requires a cleanspec because
	# char16_t/char32_t will be real types now instead of typedefs, which means
	# an ABI change since the names will mangle differently.
	$(call add-clean-step, rm -rf $(OUT_DIR))

	# Remove ro.product.locale.language/country and add ro.product.locale
	# instead.
	$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)

	# ************************************************
	# NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST
	# ************************************************