| /* |
| * =========================================================================== |
| * Common subroutines and data |
| * =========================================================================== |
| */ |
| |
| .text |
| .align 2 |
| |
| #if defined(WITH_JIT) |
| |
| #if defined(WITH_SELF_VERIFICATION) |
| /* |
| * "longjmp" to a translation after single-stepping. Before returning |
| * to translation, must save state for self-verification. |
| */ |
| .global dvmJitResumeTranslation @ (Thread* self, u4* dFP) |
| dvmJitResumeTranslation: |
| mov rSELF, r0 @ restore self |
| mov rPC, r1 @ restore Dalvik pc |
| mov rFP, r2 @ restore Dalvik fp |
| ldr r10, [rSELF,#offThread_jitResumeNPC] @ resume address |
| mov r2, #0 |
| str r2, [rSELF,#offThread_jitResumeNPC] @ reset resume address |
| ldr sp, [rSELF,#offThread_jitResumeNSP] @ cut back native stack |
| b jitSVShadowRunStart @ resume as if cache hit |
| @ expects resume addr in r10 |
| |
| .global dvmJitToInterpPunt |
| dvmJitToInterpPunt: |
| mov r2,#kSVSPunt @ r2<- interpreter entry point |
| mov r3, #0 |
| str r3, [rSELF, #offThread_inJitCodeCache] @ Back to the interp land |
| b jitSVShadowRunEnd @ doesn't return |
| |
| .global dvmJitToInterpSingleStep |
| dvmJitToInterpSingleStep: |
| mov rPC, r0 @ set up dalvik pc |
| EXPORT_PC() |
| str lr, [rSELF,#offThread_jitResumeNPC] |
| str sp, [rSELF,#offThread_jitResumeNSP] |
| str r1, [rSELF,#offThread_jitResumeDPC] |
| mov r2,#kSVSSingleStep @ r2<- interpreter entry point |
| b jitSVShadowRunEnd @ doesn't return |
| |
| |
| .global dvmJitToInterpNoChainNoProfile |
| dvmJitToInterpNoChainNoProfile: |
| mov r0,rPC @ pass our target PC |
| mov r2,#kSVSNoProfile @ r2<- interpreter entry point |
| mov r3, #0 @ 0 means !inJitCodeCache |
| str r3, [rSELF, #offThread_inJitCodeCache] @ back to the interp land |
| b jitSVShadowRunEnd @ doesn't return |
| |
| .global dvmJitToInterpTraceSelectNoChain |
| dvmJitToInterpTraceSelectNoChain: |
| mov r0,rPC @ pass our target PC |
| mov r2,#kSVSTraceSelect @ r2<- interpreter entry point |
| mov r3, #0 @ 0 means !inJitCodeCache |
| str r3, [rSELF, #offThread_inJitCodeCache] @ Back to the interp land |
| b jitSVShadowRunEnd @ doesn't return |
| |
| .global dvmJitToInterpTraceSelect |
| dvmJitToInterpTraceSelect: |
| ldr r0,[lr, #-1] @ pass our target PC |
| mov r2,#kSVSTraceSelect @ r2<- interpreter entry point |
| mov r3, #0 @ 0 means !inJitCodeCache |
| str r3, [rSELF, #offThread_inJitCodeCache] @ Back to the interp land |
| b jitSVShadowRunEnd @ doesn't return |
| |
| .global dvmJitToInterpBackwardBranch |
| dvmJitToInterpBackwardBranch: |
| ldr r0,[lr, #-1] @ pass our target PC |
| mov r2,#kSVSBackwardBranch @ r2<- interpreter entry point |
| mov r3, #0 @ 0 means !inJitCodeCache |
| str r3, [rSELF, #offThread_inJitCodeCache] @ Back to the interp land |
| b jitSVShadowRunEnd @ doesn't return |
| |
| .global dvmJitToInterpNormal |
| dvmJitToInterpNormal: |
| ldr r0,[lr, #-1] @ pass our target PC |
| mov r2,#kSVSNormal @ r2<- interpreter entry point |
| mov r3, #0 @ 0 means !inJitCodeCache |
| str r3, [rSELF, #offThread_inJitCodeCache] @ Back to the interp land |
| b jitSVShadowRunEnd @ doesn't return |
| |
| .global dvmJitToInterpNoChain |
| dvmJitToInterpNoChain: |
| mov r0,rPC @ pass our target PC |
| mov r2,#kSVSNoChain @ r2<- interpreter entry point |
| mov r3, #0 @ 0 means !inJitCodeCache |
| str r3, [rSELF, #offThread_inJitCodeCache] @ Back to the interp land |
| b jitSVShadowRunEnd @ doesn't return |
| #else |
| |
| /* |
| * "longjmp" to a translation after single-stepping. |
| */ |
| .global dvmJitResumeTranslation @ (Thread* self, u4* dFP) |
| dvmJitResumeTranslation: |
| mov rSELF, r0 @ restore self |
| mov rPC, r1 @ restore Dalvik pc |
| mov rFP, r2 @ restore Dalvik fp |
| ldr r0, [rSELF,#offThread_jitResumeNPC] |
| mov r2, #0 |
| str r2, [rSELF,#offThread_jitResumeNPC] @ reset resume address |
| ldr sp, [rSELF,#offThread_jitResumeNSP] @ cut back native stack |
| bx r0 @ resume translation |
| |
| /* |
| * Return from the translation cache to the interpreter when the compiler is |
| * having issues translating/executing a Dalvik instruction. We have to skip |
| * the code cache lookup otherwise it is possible to indefinitely bouce |
| * between the interpreter and the code cache if the instruction that fails |
| * to be compiled happens to be at a trace start. |
| */ |
| .global dvmJitToInterpPunt |
| dvmJitToInterpPunt: |
| mov rPC, r0 |
| #if defined(WITH_JIT_TUNING) |
| mov r0,lr |
| bl dvmBumpPunt; |
| #endif |
| EXPORT_PC() |
| mov r0, #0 |
| str r0, [rSELF, #offThread_inJitCodeCache] @ Back to the interp land |
| ldr rIBASE, [rSELF, #offThread_curHandlerTable] |
| FETCH_INST() |
| GET_INST_OPCODE(ip) |
| GOTO_OPCODE(ip) |
| |
| /* |
| * Return to the interpreter to handle a single instruction. |
| * We'll use the normal single-stepping mechanism via interpBreak, |
| * but also save the native pc of the resume point in the translation |
| * and the native sp so that we can later do the equivalent of a |
| * longjmp() to resume. |
| * On entry: |
| * dPC <= Dalvik PC of instrucion to interpret |
| * lr <= resume point in translation |
| * r1 <= Dalvik PC of next instruction |
| */ |
| .global dvmJitToInterpSingleStep |
| dvmJitToInterpSingleStep: |
| mov rPC, r0 @ set up dalvik pc |
| EXPORT_PC() |
| str lr, [rSELF,#offThread_jitResumeNPC] |
| str sp, [rSELF,#offThread_jitResumeNSP] |
| str r1, [rSELF,#offThread_jitResumeDPC] |
| mov r1, #1 |
| str r1, [rSELF,#offThread_singleStepCount] @ just step once |
| mov r0, rSELF |
| mov r1, #kSubModeCountedStep |
| bl dvmEnableSubMode @ (self, newMode) |
| ldr rIBASE, [rSELF,#offThread_curHandlerTable] |
| FETCH_INST() |
| GET_INST_OPCODE(ip) |
| GOTO_OPCODE(ip) |
| |
| /* |
| * Return from the translation cache and immediately request |
| * a translation for the exit target. Commonly used for callees. |
| */ |
| .global dvmJitToInterpTraceSelectNoChain |
| dvmJitToInterpTraceSelectNoChain: |
| #if defined(WITH_JIT_TUNING) |
| bl dvmBumpNoChain |
| #endif |
| mov r0,rPC |
| mov r1,rSELF |
| bl dvmJitGetTraceAddrThread @ (pc, self) |
| str r0, [rSELF, #offThread_inJitCodeCache] @ set the inJitCodeCache flag |
| mov r1, rPC @ arg1 of translation may need this |
| mov lr, #0 @ in case target is HANDLER_INTERPRET |
| cmp r0,#0 @ !0 means translation exists |
| bxne r0 @ continue native execution if so |
| b 2f @ branch over to use the interpreter |
| |
| /* |
| * Return from the translation cache and immediately request |
| * a translation for the exit target. Commonly used following |
| * invokes. |
| */ |
| .global dvmJitToInterpTraceSelect |
| dvmJitToInterpTraceSelect: |
| ldr rPC,[lr, #-1] @ get our target PC |
| add rINST,lr,#-5 @ save start of chain branch |
| add rINST, #-4 @ .. which is 9 bytes back |
| mov r0,rPC |
| mov r1,rSELF |
| bl dvmJitGetTraceAddrThread @ (pc, self) |
| str r0, [rSELF, #offThread_inJitCodeCache] @ set the inJitCodeCache flag |
| cmp r0,#0 |
| beq 2f |
| mov r1,rINST |
| bl dvmJitChain @ r0<- dvmJitChain(codeAddr,chainAddr) |
| mov r1, rPC @ arg1 of translation may need this |
| mov lr, #0 @ in case target is HANDLER_INTERPRET |
| cmp r0,#0 @ successful chain? |
| bxne r0 @ continue native execution |
| b toInterpreter @ didn't chain - resume with interpreter |
| |
| /* No translation, so request one if profiling isn't disabled*/ |
| 2: |
| ldr rIBASE, [rSELF, #offThread_curHandlerTable] |
| ldr r0, [rSELF, #offThread_pJitProfTable] |
| FETCH_INST() |
| cmp r0, #0 |
| movne r2,#kJitTSelectRequestHot @ ask for trace selection |
| bne common_selectTrace |
| GET_INST_OPCODE(ip) |
| GOTO_OPCODE(ip) |
| |
| /* |
| * Return from the translation cache to the interpreter. |
| * The return was done with a BLX from thumb mode, and |
| * the following 32-bit word contains the target rPC value. |
| * Note that lr (r14) will have its low-order bit set to denote |
| * its thumb-mode origin. |
| * |
| * We'll need to stash our lr origin away, recover the new |
| * target and then check to see if there is a translation available |
| * for our new target. If so, we do a translation chain and |
| * go back to native execution. Otherwise, it's back to the |
| * interpreter (after treating this entry as a potential |
| * trace start). |
| */ |
| .global dvmJitToInterpNormal |
| dvmJitToInterpNormal: |
| ldr rPC,[lr, #-1] @ get our target PC |
| add rINST,lr,#-5 @ save start of chain branch |
| add rINST,#-4 @ .. which is 9 bytes back |
| #if defined(WITH_JIT_TUNING) |
| bl dvmBumpNormal |
| #endif |
| mov r0,rPC |
| mov r1,rSELF |
| bl dvmJitGetTraceAddrThread @ (pc, self) |
| str r0, [rSELF, #offThread_inJitCodeCache] @ set the inJitCodeCache flag |
| cmp r0,#0 |
| beq toInterpreter @ go if not, otherwise do chain |
| mov r1,rINST |
| bl dvmJitChain @ r0<- dvmJitChain(codeAddr,chainAddr) |
| mov r1, rPC @ arg1 of translation may need this |
| mov lr, #0 @ in case target is HANDLER_INTERPRET |
| cmp r0,#0 @ successful chain? |
| bxne r0 @ continue native execution |
| b toInterpreter @ didn't chain - resume with interpreter |
| |
| /* |
| * Return from the translation cache to the interpreter to do method invocation. |
| * Check if translation exists for the callee, but don't chain to it. |
| */ |
| .global dvmJitToInterpNoChainNoProfile |
| dvmJitToInterpNoChainNoProfile: |
| #if defined(WITH_JIT_TUNING) |
| bl dvmBumpNoChain |
| #endif |
| mov r0,rPC |
| mov r1,rSELF |
| bl dvmJitGetTraceAddrThread @ (pc, self) |
| str r0, [rSELF, #offThread_inJitCodeCache] @ set the inJitCodeCache flag |
| mov r1, rPC @ arg1 of translation may need this |
| mov lr, #0 @ in case target is HANDLER_INTERPRET |
| cmp r0,#0 |
| bxne r0 @ continue native execution if so |
| EXPORT_PC() |
| ldr rIBASE, [rSELF, #offThread_curHandlerTable] |
| FETCH_INST() |
| GET_INST_OPCODE(ip) @ extract opcode from rINST |
| GOTO_OPCODE(ip) @ jump to next instruction |
| |
| /* |
| * Return from the translation cache to the interpreter to do method invocation. |
| * Check if translation exists for the callee, but don't chain to it. |
| */ |
| .global dvmJitToInterpNoChain |
| dvmJitToInterpNoChain: |
| #if defined(WITH_JIT_TUNING) |
| bl dvmBumpNoChain |
| #endif |
| mov r0,rPC |
| mov r1,rSELF |
| bl dvmJitGetTraceAddrThread @ (pc, self) |
| str r0, [rSELF, #offThread_inJitCodeCache] @ set the inJitCodeCache flag |
| mov r1, rPC @ arg1 of translation may need this |
| mov lr, #0 @ in case target is HANDLER_INTERPRET |
| cmp r0,#0 |
| bxne r0 @ continue native execution if so |
| #endif |
| |
| /* |
| * No translation, restore interpreter regs and start interpreting. |
| * rSELF & rFP were preserved in the translated code, and rPC has |
| * already been restored by the time we get here. We'll need to set |
| * up rIBASE & rINST, and load the address of the JitTable into r0. |
| */ |
| toInterpreter: |
| EXPORT_PC() |
| ldr rIBASE, [rSELF, #offThread_curHandlerTable] |
| FETCH_INST() |
| ldr r0, [rSELF, #offThread_pJitProfTable] |
| ldr rIBASE, [rSELF, #offThread_curHandlerTable] |
| @ NOTE: intended fallthrough |
| |
| /* |
| * Similar to common_updateProfile, but tests for null pJitProfTable |
| * r0 holds pJifProfTAble, rINST is loaded, rPC is current and |
| * rIBASE has been recently refreshed. |
| */ |
| common_testUpdateProfile: |
| cmp r0, #0 @ JIT switched off? |
| beq 4f @ return to interp if so |
| |
| /* |
| * Common code to update potential trace start counter, and initiate |
| * a trace-build if appropriate. |
| * On entry here: |
| * r0 <= pJitProfTable (verified non-NULL) |
| * rPC <= Dalvik PC |
| * rINST <= next instruction |
| */ |
| common_updateProfile: |
| eor r3,rPC,rPC,lsr #12 @ cheap, but fast hash function |
| lsl r3,r3,#(32 - JIT_PROF_SIZE_LOG_2) @ shift out excess bits |
| ldrb r1,[r0,r3,lsr #(32 - JIT_PROF_SIZE_LOG_2)] @ get counter |
| GET_INST_OPCODE(ip) |
| subs r1,r1,#1 @ decrement counter |
| strb r1,[r0,r3,lsr #(32 - JIT_PROF_SIZE_LOG_2)] @ and store it |
| GOTO_OPCODE_IFNE(ip) @ if not threshold, fallthrough otherwise */ |
| |
| /* Looks good, reset the counter */ |
| ldr r1, [rSELF, #offThread_jitThreshold] |
| strb r1,[r0,r3,lsr #(32 - JIT_PROF_SIZE_LOG_2)] @ reset counter |
| EXPORT_PC() |
| mov r0,rPC |
| mov r1,rSELF |
| bl dvmJitGetTraceAddrThread @ (pc, self) |
| str r0, [rSELF, #offThread_inJitCodeCache] @ set the inJitCodeCache flag |
| mov r1, rPC @ arg1 of translation may need this |
| mov lr, #0 @ in case target is HANDLER_INTERPRET |
| cmp r0,#0 |
| #if !defined(WITH_SELF_VERIFICATION) |
| bxne r0 @ jump to the translation |
| mov r2,#kJitTSelectRequest @ ask for trace selection |
| @ fall-through to common_selectTrace |
| #else |
| moveq r2,#kJitTSelectRequest @ ask for trace selection |
| beq common_selectTrace |
| /* |
| * At this point, we have a target translation. However, if |
| * that translation is actually the interpret-only pseudo-translation |
| * we want to treat it the same as no translation. |
| */ |
| mov r10, r0 @ save target |
| bl dvmCompilerGetInterpretTemplate |
| cmp r0, r10 @ special case? |
| bne jitSVShadowRunStart @ set up self verification shadow space |
| @ Need to clear the inJitCodeCache flag |
| mov r3, #0 @ 0 means not in the JIT code cache |
| str r3, [rSELF, #offThread_inJitCodeCache] @ back to the interp land |
| GET_INST_OPCODE(ip) |
| GOTO_OPCODE(ip) |
| /* no return */ |
| #endif |
| |
| /* |
| * On entry: |
| * r2 is jit state. |
| */ |
| common_selectTrace: |
| ldrh r0,[rSELF,#offThread_subMode] |
| ands r0, #(kSubModeJitTraceBuild | kSubModeJitSV) |
| bne 3f @ already doing JIT work, continue |
| str r2,[rSELF,#offThread_jitState] |
| mov r0, rSELF |
| /* |
| * Call out to validate trace-building request. If successful, |
| * rIBASE will be swapped to to send us into single-stepping trace |
| * building mode, so we need to refresh before we continue. |
| */ |
| EXPORT_PC() |
| SAVE_PC_FP_TO_SELF() @ copy of pc/fp to Thread |
| bl dvmJitCheckTraceRequest |
| 3: |
| FETCH_INST() |
| ldr rIBASE, [rSELF, #offThread_curHandlerTable] |
| 4: |
| GET_INST_OPCODE(ip) @ extract opcode from rINST |
| GOTO_OPCODE(ip) |
| /* no return */ |
| #endif |
| |
| #if defined(WITH_SELF_VERIFICATION) |
| /* |
| * Save PC and registers to shadow memory for self verification mode |
| * before jumping to native translation. |
| * On entry: |
| * rPC, rFP, rSELF: the values that they should contain |
| * r10: the address of the target translation. |
| */ |
| jitSVShadowRunStart: |
| mov r0,rPC @ r0<- program counter |
| mov r1,rFP @ r1<- frame pointer |
| mov r2,rSELF @ r2<- self (Thread) pointer |
| mov r3,r10 @ r3<- target translation |
| bl dvmSelfVerificationSaveState @ save registers to shadow space |
| ldr rFP,[r0,#offShadowSpace_shadowFP] @ rFP<- fp in shadow space |
| bx r10 @ jump to the translation |
| |
| /* |
| * Restore PC, registers, and interpreter state to original values |
| * before jumping back to the interpreter. |
| * On entry: |
| * r0: dPC |
| * r2: self verification state |
| */ |
| jitSVShadowRunEnd: |
| mov r1,rFP @ pass ending fp |
| mov r3,rSELF @ pass self ptr for convenience |
| bl dvmSelfVerificationRestoreState @ restore pc and fp values |
| LOAD_PC_FP_FROM_SELF() @ restore pc, fp |
| ldr r1,[r0,#offShadowSpace_svState] @ get self verification state |
| cmp r1,#0 @ check for punt condition |
| beq 1f |
| @ Set up SV single-stepping |
| mov r0, rSELF |
| mov r1, #kSubModeJitSV |
| bl dvmEnableSubMode @ (self, subMode) |
| mov r2,#kJitSelfVerification @ ask for self verification |
| str r2,[rSELF,#offThread_jitState] |
| @ intentional fallthrough |
| 1: @ exit to interpreter without check |
| EXPORT_PC() |
| ldr rIBASE, [rSELF, #offThread_curHandlerTable] |
| FETCH_INST() |
| GET_INST_OPCODE(ip) |
| GOTO_OPCODE(ip) |
| #endif |
| |
| /* |
| * The equivalent of "goto bail", this calls through the "bail handler". |
| * It will end this interpreter activation, and return to the caller |
| * of dvmMterpStdRun. |
| * |
| * State registers will be saved to the "thread" area before bailing |
| * debugging purposes |
| */ |
| common_gotoBail: |
| SAVE_PC_FP_TO_SELF() @ export state to "thread" |
| mov r0, rSELF @ r0<- self ptr |
| b dvmMterpStdBail @ call(self, changeInterp) |
| |
| /* |
| * The JIT's invoke method needs to remember the callsite class and |
| * target pair. Save them here so that they are available to |
| * dvmCheckJit following the interpretation of this invoke. |
| */ |
| #if defined(WITH_JIT) |
| save_callsiteinfo: |
| cmp r9, #0 |
| ldrne r9, [r9, #offObject_clazz] |
| str r0, [rSELF, #offThread_methodToCall] |
| str r9, [rSELF, #offThread_callsiteClass] |
| bx lr |
| #endif |
| |
| /* |
| * Common code for method invocation with range. |
| * |
| * On entry: |
| * r0 is "Method* methodToCall", r9 is "this" |
| */ |
| common_invokeMethodRange: |
| .LinvokeNewRange: |
| #if defined(WITH_JIT) |
| ldrh r1, [rSELF, #offThread_subMode] |
| ands r1, #kSubModeJitTraceBuild |
| blne save_callsiteinfo |
| #endif |
| @ prepare to copy args to "outs" area of current frame |
| movs r2, rINST, lsr #8 @ r2<- AA (arg count) -- test for zero |
| SAVEAREA_FROM_FP(r10, rFP) @ r10<- stack save area |
| beq .LinvokeArgsDone @ if no args, skip the rest |
| FETCH(r1, 2) @ r1<- CCCC |
| |
| .LinvokeRangeArgs: |
| @ r0=methodToCall, r1=CCCC, r2=count, r10=outs |
| @ (very few methods have > 10 args; could unroll for common cases) |
| add r3, rFP, r1, lsl #2 @ r3<- &fp[CCCC] |
| sub r10, r10, r2, lsl #2 @ r10<- "outs" area, for call args |
| 1: ldr r1, [r3], #4 @ val = *fp++ |
| subs r2, r2, #1 @ count-- |
| str r1, [r10], #4 @ *outs++ = val |
| bne 1b @ ...while count != 0 |
| b .LinvokeArgsDone |
| |
| /* |
| * Common code for method invocation without range. |
| * |
| * On entry: |
| * r0 is "Method* methodToCall", r9 is "this" |
| */ |
| common_invokeMethodNoRange: |
| .LinvokeNewNoRange: |
| #if defined(WITH_JIT) |
| ldrh r1, [rSELF, #offThread_subMode] |
| ands r1, #kSubModeJitTraceBuild |
| blne save_callsiteinfo |
| #endif |
| @ prepare to copy args to "outs" area of current frame |
| movs r2, rINST, lsr #12 @ r2<- B (arg count) -- test for zero |
| SAVEAREA_FROM_FP(r10, rFP) @ r10<- stack save area |
| FETCH(r1, 2) @ r1<- GFED (load here to hide latency) |
| beq .LinvokeArgsDone |
| |
| @ r0=methodToCall, r1=GFED, r2=count, r10=outs |
| .LinvokeNonRange: |
| rsb r2, r2, #5 @ r2<- 5-r2 |
| add pc, pc, r2, lsl #4 @ computed goto, 4 instrs each |
| bl common_abort @ (skipped due to ARM prefetch) |
| 5: and ip, rINST, #0x0f00 @ isolate A |
| ldr r2, [rFP, ip, lsr #6] @ r2<- vA (shift right 8, left 2) |
| mov r0, r0 @ nop |
| str r2, [r10, #-4]! @ *--outs = vA |
| 4: and ip, r1, #0xf000 @ isolate G |
| ldr r2, [rFP, ip, lsr #10] @ r2<- vG (shift right 12, left 2) |
| mov r0, r0 @ nop |
| str r2, [r10, #-4]! @ *--outs = vG |
| 3: and ip, r1, #0x0f00 @ isolate F |
| ldr r2, [rFP, ip, lsr #6] @ r2<- vF |
| mov r0, r0 @ nop |
| str r2, [r10, #-4]! @ *--outs = vF |
| 2: and ip, r1, #0x00f0 @ isolate E |
| ldr r2, [rFP, ip, lsr #2] @ r2<- vE |
| mov r0, r0 @ nop |
| str r2, [r10, #-4]! @ *--outs = vE |
| 1: and ip, r1, #0x000f @ isolate D |
| ldr r2, [rFP, ip, lsl #2] @ r2<- vD |
| mov r0, r0 @ nop |
| str r2, [r10, #-4]! @ *--outs = vD |
| 0: @ fall through to .LinvokeArgsDone |
| |
| .LinvokeArgsDone: @ r0=methodToCall |
| ldrh r9, [r0, #offMethod_registersSize] @ r9<- methodToCall->regsSize |
| ldrh r3, [r0, #offMethod_outsSize] @ r3<- methodToCall->outsSize |
| ldr r2, [r0, #offMethod_insns] @ r2<- method->insns |
| ldr rINST, [r0, #offMethod_clazz] @ rINST<- method->clazz |
| @ find space for the new stack frame, check for overflow |
| SAVEAREA_FROM_FP(r1, rFP) @ r1<- stack save area |
| sub r1, r1, r9, lsl #2 @ r1<- newFp (old savearea - regsSize) |
| SAVEAREA_FROM_FP(r10, r1) @ r10<- newSaveArea |
| @ bl common_dumpRegs |
| ldr r9, [rSELF, #offThread_interpStackEnd] @ r9<- interpStackEnd |
| sub r3, r10, r3, lsl #2 @ r3<- bottom (newsave - outsSize) |
| cmp r3, r9 @ bottom < interpStackEnd? |
| ldrh lr, [rSELF, #offThread_subMode] |
| ldr r3, [r0, #offMethod_accessFlags] @ r3<- methodToCall->accessFlags |
| blo .LstackOverflow @ yes, this frame will overflow stack |
| |
| @ set up newSaveArea |
| #ifdef EASY_GDB |
| SAVEAREA_FROM_FP(ip, rFP) @ ip<- stack save area |
| str ip, [r10, #offStackSaveArea_prevSave] |
| #endif |
| str rFP, [r10, #offStackSaveArea_prevFrame] |
| str rPC, [r10, #offStackSaveArea_savedPc] |
| #if defined(WITH_JIT) |
| mov r9, #0 |
| str r9, [r10, #offStackSaveArea_returnAddr] |
| #endif |
| str r0, [r10, #offStackSaveArea_method] |
| |
| @ Profiling? |
| cmp lr, #0 @ any special modes happening? |
| bne 2f @ go if so |
| 1: |
| tst r3, #ACC_NATIVE |
| bne .LinvokeNative |
| |
| /* |
| stmfd sp!, {r0-r3} |
| bl common_printNewline |
| mov r0, rFP |
| mov r1, #0 |
| bl dvmDumpFp |
| ldmfd sp!, {r0-r3} |
| stmfd sp!, {r0-r3} |
| mov r0, r1 |
| mov r1, r10 |
| bl dvmDumpFp |
| bl common_printNewline |
| ldmfd sp!, {r0-r3} |
| */ |
| |
| ldrh r9, [r2] @ r9 <- load INST from new PC |
| ldr r3, [rINST, #offClassObject_pDvmDex] @ r3<- method->clazz->pDvmDex |
| mov rPC, r2 @ publish new rPC |
| |
| @ Update state values for the new method |
| @ r0=methodToCall, r1=newFp, r3=newMethodClass, r9=newINST |
| str r0, [rSELF, #offThread_method] @ self->method = methodToCall |
| str r3, [rSELF, #offThread_methodClassDex] @ self->methodClassDex = ... |
| mov r2, #1 |
| str r2, [rSELF, #offThread_debugIsMethodEntry] |
| #if defined(WITH_JIT) |
| ldr r0, [rSELF, #offThread_pJitProfTable] |
| mov rFP, r1 @ fp = newFp |
| GET_PREFETCHED_OPCODE(ip, r9) @ extract prefetched opcode from r9 |
| mov rINST, r9 @ publish new rINST |
| str r1, [rSELF, #offThread_curFrame] @ curFrame = newFp |
| cmp r0,#0 |
| bne common_updateProfile |
| GOTO_OPCODE(ip) @ jump to next instruction |
| #else |
| mov rFP, r1 @ fp = newFp |
| GET_PREFETCHED_OPCODE(ip, r9) @ extract prefetched opcode from r9 |
| mov rINST, r9 @ publish new rINST |
| str r1, [rSELF, #offThread_curFrame] @ curFrame = newFp |
| GOTO_OPCODE(ip) @ jump to next instruction |
| #endif |
| |
| 2: |
| @ Profiling - record method entry. r0: methodToCall |
| stmfd sp!, {r0-r3} @ preserve r0-r3 |
| str rPC, [rSELF, #offThread_pc] @ update interpSave.pc |
| mov r1, r0 |
| mov r0, rSELF |
| bl dvmReportInvoke @ (self, method) |
| ldmfd sp!, {r0-r3} @ restore r0-r3 |
| b 1b |
| |
| .LinvokeNative: |
| @ Prep for the native call |
| @ r0=methodToCall, r1=newFp, r10=newSaveArea |
| ldrh lr, [rSELF, #offThread_subMode] |
| ldr r9, [rSELF, #offThread_jniLocal_topCookie]@r9<-thread->localRef->... |
| str r1, [rSELF, #offThread_curFrame] @ curFrame = newFp |
| str r9, [r10, #offStackSaveArea_localRefCookie] @newFp->localRefCookie=top |
| mov r2, r0 @ r2<- methodToCall |
| mov r0, r1 @ r0<- newFp (points to args) |
| add r1, rSELF, #offThread_retval @ r1<- &retval |
| mov r3, rSELF @ arg3<- self |
| |
| #ifdef ASSIST_DEBUGGER |
| /* insert fake function header to help gdb find the stack frame */ |
| b .Lskip |
| .type dalvik_mterp, %function |
| dalvik_mterp: |
| .fnstart |
| MTERP_ENTRY1 |
| MTERP_ENTRY2 |
| .Lskip: |
| #endif |
| |
| cmp lr, #0 @ any special SubModes active? |
| bne 11f @ go handle them if so |
| ldr ip, [r2, #offMethod_nativeFunc] @ pc<- methodToCall->nativeFunc |
| blx ip |
| 7: |
| |
| @ native return; r10=newSaveArea |
| @ equivalent to dvmPopJniLocals |
| ldr r0, [r10, #offStackSaveArea_localRefCookie] @ r0<- saved top |
| ldr r1, [rSELF, #offThread_exception] @ check for exception |
| str rFP, [rSELF, #offThread_curFrame] @ curFrame = fp |
| cmp r1, #0 @ null? |
| str r0, [rSELF, #offThread_jniLocal_topCookie] @ new top <- old top |
| bne common_exceptionThrown @ no, handle exception |
| |
| FETCH_ADVANCE_INST(3) @ advance rPC, load rINST |
| GET_INST_OPCODE(ip) @ extract opcode from rINST |
| GOTO_OPCODE(ip) @ jump to next instruction |
| |
| 11: |
| @ r0=newFp, r1=&retval, r2=methodToCall, r3=self, lr=subModes |
| stmfd sp!, {r0-r3} @ save all but subModes |
| mov r0, r2 @ r0<- methodToCall |
| mov r1, rSELF |
| mov r2, rFP |
| bl dvmReportPreNativeInvoke @ (methodToCall, self, fp) |
| ldmfd sp, {r0-r3} @ refresh. NOTE: no sp autoincrement |
| |
| @ Call the native method |
| ldr ip, [r2, #offMethod_nativeFunc] @ pc<- methodToCall->nativeFunc |
| blx ip |
| |
| @ Restore the pre-call arguments |
| ldmfd sp!, {r0-r3} @ r2<- methodToCall (others unneeded) |
| |
| @ Finish up any post-invoke subMode requirements |
| mov r0, r2 @ r0<- methodToCall |
| mov r1, rSELF |
| mov r2, rFP |
| bl dvmReportPostNativeInvoke @ (methodToCall, self, fp) |
| b 7b @ resume |
| |
| .LstackOverflow: @ r0=methodToCall |
| mov r1, r0 @ r1<- methodToCall |
| mov r0, rSELF @ r0<- self |
| bl dvmHandleStackOverflow |
| b common_exceptionThrown |
| #ifdef ASSIST_DEBUGGER |
| .fnend |
| .size dalvik_mterp, .-dalvik_mterp |
| #endif |
| |
| |
| /* |
| * Common code for method invocation, calling through "glue code". |
| * |
| * TODO: now that we have range and non-range invoke handlers, this |
| * needs to be split into two. Maybe just create entry points |
| * that set r9 and jump here? |
| * |
| * On entry: |
| * r0 is "Method* methodToCall", the method we're trying to call |
| * r9 is "bool methodCallRange", indicating if this is a /range variant |
| */ |
| .if 0 |
| .LinvokeOld: |
| sub sp, sp, #8 @ space for args + pad |
| FETCH(ip, 2) @ ip<- FEDC or CCCC |
| mov r2, r0 @ A2<- methodToCall |
| mov r0, rSELF @ A0<- self |
| SAVE_PC_FP_TO_SELF() @ export state to "self" |
| mov r1, r9 @ A1<- methodCallRange |
| mov r3, rINST, lsr #8 @ A3<- AA |
| str ip, [sp, #0] @ A4<- ip |
| bl dvmMterp_invokeMethod @ call the C invokeMethod |
| add sp, sp, #8 @ remove arg area |
| b common_resumeAfterGlueCall @ continue to next instruction |
| .endif |
| |
| |
| |
| /* |
| * Common code for handling a return instruction. |
| * |
| * This does not return. |
| */ |
| common_returnFromMethod: |
| .LreturnNew: |
| ldrh lr, [rSELF, #offThread_subMode] |
| SAVEAREA_FROM_FP(r0, rFP) |
| ldr r9, [r0, #offStackSaveArea_savedPc] @ r9 = saveArea->savedPc |
| cmp lr, #0 @ any special subMode handling needed? |
| bne 19f |
| 14: |
| ldr rFP, [r0, #offStackSaveArea_prevFrame] @ fp = saveArea->prevFrame |
| ldr r2, [rFP, #(offStackSaveArea_method - sizeofStackSaveArea)] |
| @ r2<- method we're returning to |
| cmp r2, #0 @ is this a break frame? |
| #if defined(WORKAROUND_CORTEX_A9_745320) |
| /* Don't use conditional loads if the HW defect exists */ |
| beq 15f |
| ldr r10, [r2, #offMethod_clazz] @ r10<- method->clazz |
| 15: |
| #else |
| ldrne r10, [r2, #offMethod_clazz] @ r10<- method->clazz |
| #endif |
| beq common_gotoBail @ break frame, bail out completely |
| |
| ldr rIBASE, [rSELF, #offThread_curHandlerTable] @ refresh rIBASE |
| PREFETCH_ADVANCE_INST(rINST, r9, 3) @ advance r9, update new rINST |
| str r2, [rSELF, #offThread_method]@ self->method = newSave->method |
| ldr r1, [r10, #offClassObject_pDvmDex] @ r1<- method->clazz->pDvmDex |
| str rFP, [rSELF, #offThread_curFrame] @ curFrame = fp |
| #if defined(WITH_JIT) |
| ldr r10, [r0, #offStackSaveArea_returnAddr] @ r10 = saveArea->returnAddr |
| mov rPC, r9 @ publish new rPC |
| str r1, [rSELF, #offThread_methodClassDex] |
| str r10, [rSELF, #offThread_inJitCodeCache] @ may return to JIT'ed land |
| cmp r10, #0 @ caller is compiled code |
| blxne r10 |
| GET_INST_OPCODE(ip) @ extract opcode from rINST |
| GOTO_OPCODE(ip) @ jump to next instruction |
| #else |
| GET_INST_OPCODE(ip) @ extract opcode from rINST |
| mov rPC, r9 @ publish new rPC |
| str r1, [rSELF, #offThread_methodClassDex] |
| GOTO_OPCODE(ip) @ jump to next instruction |
| #endif |
| |
| 19: |
| @ Handle special actions |
| @ On entry, r0: StackSaveArea |
| ldr r1, [r0, #offStackSaveArea_prevFrame] @ r2<- prevFP |
| str rPC, [rSELF, #offThread_pc] @ update interpSave.pc |
| str r1, [rSELF, #offThread_curFrame] @ update interpSave.curFrame |
| mov r0, rSELF |
| bl dvmReportReturn @ (self) |
| SAVEAREA_FROM_FP(r0, rFP) @ restore StackSaveArea |
| b 14b @ continue |
| |
| /* |
| * Return handling, calls through "glue code". |
| */ |
| .if 0 |
| .LreturnOld: |
| SAVE_PC_FP_TO_SELF() @ export state |
| mov r0, rSELF @ arg to function |
| bl dvmMterp_returnFromMethod |
| b common_resumeAfterGlueCall |
| .endif |
| |
| |
| /* |
| * Somebody has thrown an exception. Handle it. |
| * |
| * If the exception processing code returns to us (instead of falling |
| * out of the interpreter), continue with whatever the next instruction |
| * now happens to be. |
| * |
| * This does not return. |
| */ |
| .global dvmMterpCommonExceptionThrown |
| dvmMterpCommonExceptionThrown: |
| common_exceptionThrown: |
| .LexceptionNew: |
| |
| EXPORT_PC() |
| |
| mov r0, rSELF |
| bl dvmCheckSuspendPending |
| |
| ldr r9, [rSELF, #offThread_exception] @ r9<- self->exception |
| mov r1, rSELF @ r1<- self |
| mov r0, r9 @ r0<- exception |
| bl dvmAddTrackedAlloc @ don't let the exception be GCed |
| ldrh r2, [rSELF, #offThread_subMode] @ get subMode flags |
| mov r3, #0 @ r3<- NULL |
| str r3, [rSELF, #offThread_exception] @ self->exception = NULL |
| |
| @ Special subMode? |
| cmp r2, #0 @ any special subMode handling needed? |
| bne 7f @ go if so |
| 8: |
| /* set up args and a local for "&fp" */ |
| /* (str sp, [sp, #-4]! would be perfect here, but is discouraged) */ |
| str rFP, [sp, #-4]! @ *--sp = fp |
| mov ip, sp @ ip<- &fp |
| mov r3, #0 @ r3<- false |
| str ip, [sp, #-4]! @ *--sp = &fp |
| ldr r1, [rSELF, #offThread_method] @ r1<- self->method |
| mov r0, rSELF @ r0<- self |
| ldr r1, [r1, #offMethod_insns] @ r1<- method->insns |
| mov r2, r9 @ r2<- exception |
| sub r1, rPC, r1 @ r1<- pc - method->insns |
| mov r1, r1, asr #1 @ r1<- offset in code units |
| |
| /* call, r0 gets catchRelPc (a code-unit offset) */ |
| bl dvmFindCatchBlock @ call(self, relPc, exc, scan?, &fp) |
| |
| /* fix earlier stack overflow if necessary; may trash rFP */ |
| ldrb r1, [rSELF, #offThread_stackOverflowed] |
| cmp r1, #0 @ did we overflow earlier? |
| beq 1f @ no, skip ahead |
| mov rFP, r0 @ save relPc result in rFP |
| mov r0, rSELF @ r0<- self |
| mov r1, r9 @ r1<- exception |
| bl dvmCleanupStackOverflow @ call(self) |
| mov r0, rFP @ restore result |
| 1: |
| |
| /* update frame pointer and check result from dvmFindCatchBlock */ |
| ldr rFP, [sp, #4] @ retrieve the updated rFP |
| cmp r0, #0 @ is catchRelPc < 0? |
| add sp, sp, #8 @ restore stack |
| bmi .LnotCaughtLocally |
| |
| /* adjust locals to match self->interpSave.curFrame and updated PC */ |
| SAVEAREA_FROM_FP(r1, rFP) @ r1<- new save area |
| ldr r1, [r1, #offStackSaveArea_method] @ r1<- new method |
| str r1, [rSELF, #offThread_method] @ self->method = new method |
| ldr r2, [r1, #offMethod_clazz] @ r2<- method->clazz |
| ldr r3, [r1, #offMethod_insns] @ r3<- method->insns |
| ldr r2, [r2, #offClassObject_pDvmDex] @ r2<- method->clazz->pDvmDex |
| add rPC, r3, r0, asl #1 @ rPC<- method->insns + catchRelPc |
| str r2, [rSELF, #offThread_methodClassDex] @ self->pDvmDex = meth... |
| |
| /* release the tracked alloc on the exception */ |
| mov r0, r9 @ r0<- exception |
| mov r1, rSELF @ r1<- self |
| bl dvmReleaseTrackedAlloc @ release the exception |
| |
| /* restore the exception if the handler wants it */ |
| ldr rIBASE, [rSELF, #offThread_curHandlerTable] @ refresh rIBASE |
| FETCH_INST() @ load rINST from rPC |
| GET_INST_OPCODE(ip) @ extract opcode from rINST |
| cmp ip, #OP_MOVE_EXCEPTION @ is it "move-exception"? |
| streq r9, [rSELF, #offThread_exception] @ yes, restore the exception |
| GOTO_OPCODE(ip) @ jump to next instruction |
| |
| @ Manage debugger bookkeeping |
| 7: |
| str rPC, [rSELF, #offThread_pc] @ update interpSave.pc |
| str rFP, [rSELF, #offThread_curFrame] @ update interpSave.curFrame |
| mov r0, rSELF @ arg0<- self |
| mov r1, r9 @ arg1<- exception |
| bl dvmReportExceptionThrow @ (self, exception) |
| b 8b @ resume with normal handling |
| |
| .LnotCaughtLocally: @ r9=exception |
| /* fix stack overflow if necessary */ |
| ldrb r1, [rSELF, #offThread_stackOverflowed] |
| cmp r1, #0 @ did we overflow earlier? |
| movne r0, rSELF @ if yes: r0<- self |
| movne r1, r9 @ if yes: r1<- exception |
| blne dvmCleanupStackOverflow @ if yes: call(self) |
| |
| @ may want to show "not caught locally" debug messages here |
| #if DVM_SHOW_EXCEPTION >= 2 |
| /* call __android_log_print(prio, tag, format, ...) */ |
| /* "Exception %s from %s:%d not caught locally" */ |
| @ dvmLineNumFromPC(method, pc - method->insns) |
| ldr r0, [rSELF, #offThread_method] |
| ldr r1, [r0, #offMethod_insns] |
| sub r1, rPC, r1 |
| asr r1, r1, #1 |
| bl dvmLineNumFromPC |
| str r0, [sp, #-4]! |
| @ dvmGetMethodSourceFile(method) |
| ldr r0, [rSELF, #offThread_method] |
| bl dvmGetMethodSourceFile |
| str r0, [sp, #-4]! |
| @ exception->clazz->descriptor |
| ldr r3, [r9, #offObject_clazz] |
| ldr r3, [r3, #offClassObject_descriptor] |
| @ |
| ldr r2, strExceptionNotCaughtLocally |
| 0: add r2, pc |
| ldr r1, strLogTag |
| 1: add r1, pc |
| mov r0, #3 @ LOG_DEBUG |
| bl __android_log_print |
| #endif |
| str r9, [rSELF, #offThread_exception] @ restore exception |
| mov r0, r9 @ r0<- exception |
| mov r1, rSELF @ r1<- self |
| bl dvmReleaseTrackedAlloc @ release the exception |
| b common_gotoBail @ bail out |
| |
| strExceptionNotCaughtLocally: |
| .word PCREL_REF(.LstrExceptionNotCaughtLocally,0b) |
| strLogTag: |
| .word PCREL_REF(.LstrLogTag,1b) |
| |
| /* |
| * Exception handling, calls through "glue code". |
| */ |
| .if 0 |
| .LexceptionOld: |
| SAVE_PC_FP_TO_SELF() @ export state |
| mov r0, rSELF @ arg to function |
| bl dvmMterp_exceptionThrown |
| b common_resumeAfterGlueCall |
| .endif |
| |
| #if defined(WITH_JIT) |
| /* |
| * If the JIT is actively building a trace we need to make sure |
| * that the field is fully resolved before including the current |
| * instruction. |
| * |
| * On entry: |
| * r10: &dvmDex->pResFields[field] |
| * r0: field pointer (must preserve) |
| */ |
| common_verifyField: |
| ldrh r3, [rSELF, #offThread_subMode] @ r3 <- submode byte |
| ands r3, #kSubModeJitTraceBuild |
| bxeq lr @ Not building trace, continue |
| ldr r1, [r10] @ r1<- reload resolved StaticField ptr |
| cmp r1, #0 @ resolution complete? |
| bxne lr @ yes, continue |
| stmfd sp!, {r0-r2,lr} @ save regs |
| mov r0, rSELF |
| mov r1, rPC |
| bl dvmJitEndTraceSelect @ (self,pc) end trace before this inst |
| ldmfd sp!, {r0-r2, lr} |
| bx lr @ return |
| #endif |
| |
| /* |
| * After returning from a "glued" function, pull out the updated |
| * values and start executing at the next instruction. |
| */ |
| common_resumeAfterGlueCall: |
| LOAD_PC_FP_FROM_SELF() @ pull rPC and rFP out of thread |
| ldr rIBASE, [rSELF, #offThread_curHandlerTable] @ refresh |
| FETCH_INST() @ load rINST from rPC |
| GET_INST_OPCODE(ip) @ extract opcode from rINST |
| GOTO_OPCODE(ip) @ jump to next instruction |
| |
| /* |
| * Invalid array index. Note that our calling convention is strange; we use r1 |
| * and r3 because those just happen to be the registers all our callers are |
| * using. We move r3 before calling the C function, but r1 happens to match. |
| * r1: index |
| * r3: size |
| */ |
| common_errArrayIndex: |
| EXPORT_PC() |
| mov r0, r3 |
| bl dvmThrowArrayIndexOutOfBoundsException |
| b common_exceptionThrown |
| |
| /* |
| * Integer divide or mod by zero. |
| */ |
| common_errDivideByZero: |
| EXPORT_PC() |
| ldr r0, strDivideByZero |
| 0: add r0, pc |
| bl dvmThrowArithmeticException |
| b common_exceptionThrown |
| |
| strDivideByZero: |
| .word PCREL_REF(.LstrDivideByZero,0b) |
| |
| /* |
| * Attempt to allocate an array with a negative size. |
| * On entry: length in r1 |
| */ |
| common_errNegativeArraySize: |
| EXPORT_PC() |
| mov r0, r1 @ arg0 <- len |
| bl dvmThrowNegativeArraySizeException @ (len) |
| b common_exceptionThrown |
| |
| /* |
| * Invocation of a non-existent method. |
| * On entry: method name in r1 |
| */ |
| common_errNoSuchMethod: |
| EXPORT_PC() |
| mov r0, r1 |
| bl dvmThrowNoSuchMethodError |
| b common_exceptionThrown |
| |
| /* |
| * We encountered a null object when we weren't expecting one. We |
| * export the PC, throw a NullPointerException, and goto the exception |
| * processing code. |
| */ |
| common_errNullObject: |
| EXPORT_PC() |
| mov r0, #0 |
| bl dvmThrowNullPointerException |
| b common_exceptionThrown |
| |
| /* |
| * For debugging, cause an immediate fault. The source address will |
| * be in lr (use a bl instruction to jump here). |
| */ |
| common_abort: |
| ldr pc, .LdeadFood |
| .LdeadFood: |
| .word 0xdeadf00d |
| |
| /* |
| * Spit out a "we were here", preserving all registers. (The attempt |
| * to save ip won't work, but we need to save an even number of |
| * registers for EABI 64-bit stack alignment.) |
| */ |
| .macro SQUEAK num |
| common_squeak\num: |
| stmfd sp!, {r0, r1, r2, r3, ip, lr} |
| ldr r0, strSqueak\num |
| 0: add r0, pc |
| mov r1, #\num |
| bl printf |
| ldmfd sp!, {r0, r1, r2, r3, ip, lr} |
| bx lr |
| |
| strSqueak\num: |
| .word PCREL_REF(.LstrSqueak,0b) |
| .endm |
| |
| SQUEAK 0 |
| SQUEAK 1 |
| SQUEAK 2 |
| SQUEAK 3 |
| SQUEAK 4 |
| SQUEAK 5 |
| |
| /* |
| * Spit out the number in r0, preserving registers. |
| */ |
| common_printNum: |
| stmfd sp!, {r0, r1, r2, r3, ip, lr} |
| mov r1, r0 |
| ldr r0, strSqueak |
| 0: add r0, pc |
| bl printf |
| ldmfd sp!, {r0, r1, r2, r3, ip, lr} |
| bx lr |
| |
| strSqueak: |
| .word PCREL_REF(.LstrSqueak,0b) |
| |
| /* |
| * Print a newline, preserving registers. |
| */ |
| common_printNewline: |
| stmfd sp!, {r0, r1, r2, r3, ip, lr} |
| ldr r0, strNewline |
| 0: add r0, pc |
| bl printf |
| ldmfd sp!, {r0, r1, r2, r3, ip, lr} |
| bx lr |
| |
| strNewline: |
| .word PCREL_REF(.LstrNewline,0b) |
| |
| /* |
| * Print the 32-bit quantity in r0 as a hex value, preserving registers. |
| */ |
| common_printHex: |
| stmfd sp!, {r0, r1, r2, r3, ip, lr} |
| mov r1, r0 |
| ldr r0, strPrintHex |
| 0: add r0, pc |
| bl printf |
| ldmfd sp!, {r0, r1, r2, r3, ip, lr} |
| bx lr |
| |
| strPrintHex: |
| .word PCREL_REF(.LstrPrintHex,0b) |
| |
| /* |
| * Print the 64-bit quantity in r0-r1, preserving registers. |
| */ |
| common_printLong: |
| stmfd sp!, {r0, r1, r2, r3, ip, lr} |
| mov r3, r1 |
| mov r2, r0 |
| ldr r0, strPrintLong |
| 0: add r0, pc |
| bl printf |
| ldmfd sp!, {r0, r1, r2, r3, ip, lr} |
| bx lr |
| |
| strPrintLong: |
| .word PCREL_REF(.LstrPrintLong,0b) |
| |
| /* |
| * Print full method info. Pass the Method* in r0. Preserves regs. |
| */ |
| common_printMethod: |
| stmfd sp!, {r0, r1, r2, r3, ip, lr} |
| bl dvmMterpPrintMethod |
| ldmfd sp!, {r0, r1, r2, r3, ip, lr} |
| bx lr |
| |
| /* |
| * Call a C helper function that dumps regs and possibly some |
| * additional info. Requires the C function to be compiled in. |
| */ |
| .if 0 |
| common_dumpRegs: |
| stmfd sp!, {r0, r1, r2, r3, ip, lr} |
| bl dvmMterpDumpArmRegs |
| ldmfd sp!, {r0, r1, r2, r3, ip, lr} |
| bx lr |
| .endif |
| |
| #if 0 |
| /* |
| * Experiment on VFP mode. |
| * |
| * uint32_t setFPSCR(uint32_t val, uint32_t mask) |
| * |
| * Updates the bits specified by "mask", setting them to the values in "val". |
| */ |
| setFPSCR: |
| and r0, r0, r1 @ make sure no stray bits are set |
| fmrx r2, fpscr @ get VFP reg |
| mvn r1, r1 @ bit-invert mask |
| and r2, r2, r1 @ clear masked bits |
| orr r2, r2, r0 @ set specified bits |
| fmxr fpscr, r2 @ set VFP reg |
| mov r0, r2 @ return new value |
| bx lr |
| |
| .align 2 |
| .global dvmConfigureFP |
| .type dvmConfigureFP, %function |
| dvmConfigureFP: |
| stmfd sp!, {ip, lr} |
| /* 0x03000000 sets DN/FZ */ |
| /* 0x00009f00 clears the six exception enable flags */ |
| bl common_squeak0 |
| mov r0, #0x03000000 @ r0<- 0x03000000 |
| add r1, r0, #0x9f00 @ r1<- 0x03009f00 |
| bl setFPSCR |
| ldmfd sp!, {ip, pc} |
| #endif |
| |
| |
| |
| /* |
| * Zero-terminated ASCII string data. |
| * |
| * On ARM we have two choices: do like gcc does, and LDR from a .word |
| * with the address, or use an ADR pseudo-op to get the address |
| * directly. ADR saves 4 bytes and an indirection, but it's using a |
| * PC-relative addressing mode and hence has a limited range, which |
| * makes it not work well with mergeable string sections. |
| */ |
| .section .rodata.str1.4,"aMS",%progbits,1 |
| |
| .LstrBadEntryPoint: |
| .asciz "Bad entry point %d\n" |
| .LstrFilledNewArrayNotImpl: |
| .asciz "filled-new-array only implemented for objects and 'int'" |
| .LstrDivideByZero: |
| .asciz "divide by zero" |
| .LstrLogTag: |
| .asciz "mterp" |
| .LstrExceptionNotCaughtLocally: |
| .asciz "Exception %s from %s:%d not caught locally\n" |
| |
| .LstrNewline: |
| .asciz "\n" |
| .LstrSqueak: |
| .asciz "<%d>" |
| .LstrPrintHex: |
| .asciz "<%#x>" |
| .LstrPrintLong: |
| .asciz "<%lld>" |