vm/mterp/gen-mterp.py - platform/dalvik - Gitiles

 #!/usr/bin/env python
 #
 # Copyright (C) 2007 The Android Open Source Project
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 #      http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.

 #
 # Using instructions from an architecture-specific config file, generate C
 # and assembly source files for the Dalvik interpreter.
 #

 import sys, string, re, time
 from string import Template

 interp_defs_file = "../../libdex/DexOpcodes.h" # need opcode list
 kNumPackedOpcodes = 512 # TODO: Derive this from DexOpcodes.h.

 splitops = False
 verbose = False
 handler_size_bits = -1000
 handler_size_bytes = -1000
 in_op_start = 0             # 0=not started, 1=started, 2=ended
 in_alt_op_start = 0         # 0=not started, 1=started, 2=ended
 default_op_dir = None
 default_alt_stub = None
 opcode_locations = {}
 alt_opcode_locations = {}
 asm_stub_text = []
 label_prefix = ".L"         # use ".L" to hide labels from gdb
 alt_label_prefix = ".L_ALT" # use ".L" to hide labels from gdb
 style = None                # interpreter style
 generate_alt_table = False

 # Exception class.
 class DataParseError(SyntaxError):
     "Failure when parsing data file"

 #
 # Set any omnipresent substitution values.
 #
 def getGlobalSubDict():
     return { "handler_size_bits":handler_size_bits,
              "handler_size_bytes":handler_size_bytes }

 #
 # Parse arch config file --
 # Set interpreter style.
 #
 def setHandlerStyle(tokens):
     global style
     if len(tokens) != 2:
         raise DataParseError("handler-style requires one argument")
     style = tokens[1]
     if style != "computed-goto" and style != "jump-table" and style != "all-c":
         raise DataParseError("handler-style (%s) invalid" % style)

 #
 # Parse arch config file --
 # Set handler_size_bytes to the value of tokens[1], and handler_size_bits to
 # log2(handler_size_bytes).  Throws an exception if "bytes" is not 0 or
 # a power of two.
 #
 def setHandlerSize(tokens):
     global handler_size_bits, handler_size_bytes
     if style != "computed-goto":
         print "Warning: handler-size valid only for computed-goto interpreters"
     if len(tokens) != 2:
         raise DataParseError("handler-size requires one argument")
     if handler_size_bits != -1000:
         raise DataParseError("handler-size may only be set once")

     # compute log2(n), and make sure n is 0 or a power of 2
     handler_size_bytes = bytes = int(tokens[1])
     bits = -1
     while bytes > 0:
         bytes //= 2     # halve with truncating division
         bits += 1

     if handler_size_bytes == 0 or handler_size_bytes != (1 << bits):
         raise DataParseError("handler-size (%d) must be power of 2" \
                 % orig_bytes)
     handler_size_bits = bits

 #
 # Parse arch config file --
 # Copy a file in to the C or asm output file.
 #
 def importFile(tokens):
     if len(tokens) != 2:
         raise DataParseError("import requires one argument")
     source = tokens[1]
     if source.endswith(".cpp"):
         appendSourceFile(tokens[1], getGlobalSubDict(), c_fp, None)
     elif source.endswith(".S"):
         appendSourceFile(tokens[1], getGlobalSubDict(), asm_fp, None)
     else:
         raise DataParseError("don't know how to import %s (expecting .cpp/.S)"
                 % source)

 #
 # Parse arch config file --
 # Copy a file in to the C or asm output file.
 #
 def setAsmStub(tokens):
     global asm_stub_text
     if style == "all-c":
         print "Warning: asm-stub ignored for all-c interpreter"
     if len(tokens) != 2:
         raise DataParseError("import requires one argument")
     try:
         stub_fp = open(tokens[1])
         asm_stub_text = stub_fp.readlines()
     except IOError, err:
         stub_fp.close()
         raise DataParseError("unable to load asm-stub: %s" % str(err))
     stub_fp.close()

 #
 # Parse arch config file --
 # Record location of default alt stub
 #
 def setAsmAltStub(tokens):
     global default_alt_stub, generate_alt_table
     if style == "all-c":
         print "Warning: asm-alt-stub ingored for all-c interpreter"
     if len(tokens) != 2:
         raise DataParseError("import requires one argument")
     default_alt_stub = tokens[1]
     generate_alt_table = True

 #
 # Parse arch config file --
 # Start of opcode list.
 #
 def opStart(tokens):
     global in_op_start
     global default_op_dir
     if len(tokens) != 2:
         raise DataParseError("opStart takes a directory name argument")
     if in_op_start != 0:
         raise DataParseError("opStart can only be specified once")
     default_op_dir = tokens[1]
     in_op_start = 1

 #
 # Parse arch config file --
 # Set location of a single alt opcode's source file.
 #
 def altEntry(tokens):
     global generate_alt_table
     if len(tokens) != 3:
         raise DataParseError("alt requires exactly two arguments")
     if in_op_start != 1:
         raise DataParseError("alt statements must be between opStart/opEnd")
     try:
         index = opcodes.index(tokens[1])
     except ValueError:
         raise DataParseError("unknown opcode %s" % tokens[1])
     if alt_opcode_locations.has_key(tokens[1]):
         print "Note: alt overrides earlier %s (%s -> %s)" \
                 % (tokens[1], alt_opcode_locations[tokens[1]], tokens[2])
     alt_opcode_locations[tokens[1]] = tokens[2]
     generate_alt_table = True

 #
 # Parse arch config file --
 # Set location of a single opcode's source file.
 #
 def opEntry(tokens):
     #global opcode_locations
     if len(tokens) != 3:
         raise DataParseError("op requires exactly two arguments")
     if in_op_start != 1:
         raise DataParseError("op statements must be between opStart/opEnd")
     try:
         index = opcodes.index(tokens[1])
     except ValueError:
         raise DataParseError("unknown opcode %s" % tokens[1])
     if opcode_locations.has_key(tokens[1]):
         print "Note: op overrides earlier %s (%s -> %s)" \
                 % (tokens[1], opcode_locations[tokens[1]], tokens[2])
     opcode_locations[tokens[1]] = tokens[2]

 #
 # Emit jump table
 #
 def emitJmpTable(start_label, prefix):
     asm_fp.write("\n    .global %s\n" % start_label)
     asm_fp.write("    .text\n")
     asm_fp.write("%s:\n" % start_label)
     for i in xrange(kNumPackedOpcodes):
         op = opcodes[i]
         dict = getGlobalSubDict()
         dict.update({ "opcode":op, "opnum":i })
         asm_fp.write("    .long " + prefix + \
                      "_%(opcode)s /* 0x%(opnum)02x */\n" % dict)

 #
 # Parse arch config file --
 # End of opcode list; emit instruction blocks.
 #
 def opEnd(tokens):
     global in_op_start
     if len(tokens) != 1:
         raise DataParseError("opEnd takes no arguments")
     if in_op_start != 1:
         raise DataParseError("opEnd must follow opStart, and only appear once")
     in_op_start = 2

     loadAndEmitOpcodes()
     if splitops == False:
         if generate_alt_table:
             loadAndEmitAltOpcodes()
             if style == "jump-table":
                 emitJmpTable("dvmAsmInstructionStart", label_prefix);
                 emitJmpTable("dvmAsmAltInstructionStart", alt_label_prefix);

 def genaltop(tokens):
     if in_op_start != 2:
        raise DataParseError("alt-op can be specified only after op-end")
     if len(tokens) != 1:
         raise DataParseError("opEnd takes no arguments")
     if generate_alt_table:
         loadAndEmitAltOpcodes()
         if style == "jump-table":
             emitJmpTable("dvmAsmInstructionStart", label_prefix);
             emitJmpTable("dvmAsmAltInstructionStart", alt_label_prefix);


 #
 # Extract an ordered list of instructions from the VM sources.  We use the
 # "goto table" definition macro, which has exactly kNumPackedOpcodes
 # entries.
 #
 def getOpcodeList():
     opcodes = []
     opcode_fp = open(interp_defs_file)
     opcode_re = re.compile(r"^\s*H\(OP_(\w+)\),.*", re.DOTALL)
     for line in opcode_fp:
         match = opcode_re.match(line)
         if not match:
             continue
         opcodes.append("OP_" + match.group(1))
     opcode_fp.close()

     if len(opcodes) != kNumPackedOpcodes:
         print "ERROR: found %d opcodes in Interp.h (expected %d)" \
                 % (len(opcodes), kNumPackedOpcodes)
         raise SyntaxError, "bad opcode count"
     return opcodes

 def emitAlign():
     if style == "computed-goto":
         asm_fp.write("    .balign %d\n" % handler_size_bytes)

 #
 # Load and emit opcodes for all kNumPackedOpcodes instructions.
 #
 def loadAndEmitOpcodes():
     sister_list = []
     assert len(opcodes) == kNumPackedOpcodes
     need_dummy_start = False
     if style == "jump-table":
         start_label = "dvmAsmInstructionStartCode"
         end_label = "dvmAsmInstructionEndCode"
     else:
         start_label = "dvmAsmInstructionStart"
         end_label = "dvmAsmInstructionEnd"

     # point dvmAsmInstructionStart at the first handler or stub
     asm_fp.write("\n    .global %s\n" % start_label)
     asm_fp.write("    .type   %s, %%function\n" % start_label)
     asm_fp.write("%s = " % start_label + label_prefix + "_OP_NOP\n")
     asm_fp.write("    .text\n\n")

     for i in xrange(kNumPackedOpcodes):
         op = opcodes[i]

         if opcode_locations.has_key(op):
             location = opcode_locations[op]
         else:
             location = default_op_dir

         if location == "c":
             loadAndEmitC(location, i)
             if len(asm_stub_text) == 0:
                 need_dummy_start = True
         else:
             loadAndEmitAsm(location, i, sister_list)

     # For a 100% C implementation, there are no asm handlers or stubs.  We
     # need to have the dvmAsmInstructionStart label point at OP_NOP, and it's
     # too annoying to try to slide it in after the alignment psuedo-op, so
     # we take the low road and just emit a dummy OP_NOP here.
     if need_dummy_start:
         emitAlign()
         asm_fp.write(label_prefix + "_OP_NOP:   /* dummy */\n");

     emitAlign()
     asm_fp.write("    .size   %s, .-%s\n" % (start_label, start_label))
     asm_fp.write("    .global %s\n" % end_label)
     asm_fp.write("%s:\n" % end_label)

     if style == "computed-goto":
         emitSectionComment("Sister implementations", asm_fp)
         asm_fp.write("    .global dvmAsmSisterStart\n")
         asm_fp.write("    .type   dvmAsmSisterStart, %function\n")
         asm_fp.write("    .text\n")
         asm_fp.write("    .balign 4\n")
         asm_fp.write("dvmAsmSisterStart:\n")
         asm_fp.writelines(sister_list)
         asm_fp.write("\n    .size   dvmAsmSisterStart, .-dvmAsmSisterStart\n")
         asm_fp.write("    .global dvmAsmSisterEnd\n")
         asm_fp.write("dvmAsmSisterEnd:\n\n")

 #
 # Load an alternate entry stub
 #
 def loadAndEmitAltStub(source, opindex):
     op = opcodes[opindex]
     if verbose:
         print " alt emit %s --> stub" % source
     dict = getGlobalSubDict()
     dict.update({ "opcode":op, "opnum":opindex })

     emitAsmHeader(asm_fp, dict, alt_label_prefix)
     appendSourceFile(source, dict, asm_fp, None)

 #
 # Load and emit alternate opcodes for all kNumPackedOpcodes instructions.
 #
 def loadAndEmitAltOpcodes():
     assert len(opcodes) == kNumPackedOpcodes
     if style == "jump-table":
         start_label = "dvmAsmAltInstructionStartCode"
         end_label = "dvmAsmAltInstructionEndCode"
     else:
         start_label = "dvmAsmAltInstructionStart"
         end_label = "dvmAsmAltInstructionEnd"

     # point dvmAsmInstructionStart at the first handler or stub
     asm_fp.write("\n    .global %s\n" % start_label)
     asm_fp.write("    .type   %s, %%function\n" % start_label)
     asm_fp.write("    .text\n\n")
     asm_fp.write("%s = " % start_label + label_prefix + "_ALT_OP_NOP\n")

     for i in xrange(kNumPackedOpcodes):
         op = opcodes[i]
         if alt_opcode_locations.has_key(op):
             source = "%s/ALT_%s.S" % (alt_opcode_locations[op], op)
         else:
             source = default_alt_stub
         loadAndEmitAltStub(source, i)

     emitAlign()
     asm_fp.write("    .size   %s, .-%s\n" % (start_label, start_label))
     asm_fp.write("    .global %s\n" % end_label)
     asm_fp.write("%s:\n" % end_label)

 #
 # Load a C fragment and emit it, then output an assembly stub.
 #
 def loadAndEmitC(location, opindex):
     op = opcodes[opindex]
     source = "%s/%s.cpp" % (location, op)
     if verbose:
         print " emit %s --> C++" % source
     dict = getGlobalSubDict()
     dict.update({ "opcode":op, "opnum":opindex })

     appendSourceFile(source, dict, c_fp, None)

     if len(asm_stub_text) != 0:
         emitAsmStub(asm_fp, dict)

 #
 # Load an assembly fragment and emit it.
 #
 def loadAndEmitAsm(location, opindex, sister_list):
     op = opcodes[opindex]
     source = "%s/%s.S" % (location, op)
     dict = getGlobalSubDict()
     dict.update({ "opcode":op, "opnum":opindex })
     if verbose:
         print " emit %s --> asm" % source

     emitAsmHeader(asm_fp, dict, label_prefix)
     appendSourceFile(source, dict, asm_fp, sister_list)

 #
 # Output the alignment directive and label for an assembly piece.
 #
 def emitAsmHeader(outfp, dict, prefix):
     outfp.write("/* ------------------------------ */\n")
     # The alignment directive ensures that the handler occupies
     # at least the correct amount of space.  We don't try to deal
     # with overflow here.
     emitAlign()
     # Emit a label so that gdb will say the right thing.  We prepend an
     # underscore so the symbol name doesn't clash with the Opcode enum.
     outfp.write(prefix + "_%(opcode)s: /* 0x%(opnum)02x */\n" % dict)

 #
 # Output a generic instruction stub that updates the "glue" struct and
 # calls the C implementation.
 #
 def emitAsmStub(outfp, dict):
     emitAsmHeader(outfp, dict, label_prefix)
     for line in asm_stub_text:
         templ = Template(line)
         outfp.write(templ.substitute(dict))

 #
 # Append the file specified by "source" to the open "outfp".  Each line will
 # be template-replaced using the substitution dictionary "dict".
 #
 # If the first line of the file starts with "%" it is taken as a directive.
 # A "%include" line contains a filename and, optionally, a Python-style
 # dictionary declaration with substitution strings.  (This is implemented
 # with recursion.)
 #
 # If "sister_list" is provided, and we find a line that contains only "&",
 # all subsequent lines from the file will be appended to sister_list instead
 # of copied to the output.
 #
 # This may modify "dict".
 #
 def appendSourceFile(source, dict, outfp, sister_list):
     outfp.write("/* File: %s */\n" % source)
     infp = open(source, "r")
     in_sister = False
     for line in infp:
         if line.startswith("%include"):
             # Parse the "include" line
             tokens = line.strip().split(' ', 2)
             if len(tokens) < 2:
                 raise DataParseError("malformed %%include in %s" % source)

             alt_source = tokens[1].strip("\"")
             if alt_source == source:
                 raise DataParseError("self-referential %%include in %s"
                         % source)

             new_dict = dict.copy()
             if len(tokens) == 3:
                 new_dict.update(eval(tokens[2]))
             #print " including src=%s dict=%s" % (alt_source, new_dict)
             appendSourceFile(alt_source, new_dict, outfp, sister_list)
             continue

         elif line.startswith("%default"):
             # copy keywords into dictionary
             tokens = line.strip().split(' ', 1)
             if len(tokens) < 2:
                 raise DataParseError("malformed %%default in %s" % source)
             defaultValues = eval(tokens[1])
             for entry in defaultValues:
                 dict.setdefault(entry, defaultValues[entry])
             continue

         elif line.startswith("%verify"):
             # more to come, someday
             continue

         elif line.startswith("%break") and sister_list != None:
             # allow more than one %break, ignoring all following the first
             if style == "computed-goto" and not in_sister:
                 in_sister = True
                 sister_list.append("\n/* continuation for %(opcode)s */\n"%dict)
             continue

         # perform keyword substitution if a dictionary was provided
         if dict != None:
             templ = Template(line)
             try:
                 subline = templ.substitute(dict)
             except KeyError, err:
                 raise DataParseError("keyword substitution failed in %s: %s"
                         % (source, str(err)))
             except:
                 print "ERROR: substitution failed: " + line
                 raise
         else:
             subline = line

         # write output to appropriate file
         if in_sister:
             sister_list.append(subline)
         else:
             outfp.write(subline)
     outfp.write("\n")
     infp.close()

 #
 # Emit a C-style section header comment.
 #
 def emitSectionComment(str, fp):
     equals = "========================================" \
              "==================================="

     fp.write("\n/*\n * %s\n *  %s\n * %s\n */\n" %
         (equals, str, equals))


 #
 # ===========================================================================
 # "main" code
 #

 #
 # Check args.
 #
 if len(sys.argv) != 3:
     print "Usage: %s target-arch output-dir" % sys.argv[0]
     sys.exit(2)

 target_arch = sys.argv[1]
 output_dir = sys.argv[2]

 #
 # Extract opcode list.
 #
 opcodes = getOpcodeList()
 #for op in opcodes:
 #    print "  %s" % op

 #
 # Open config file.
 #
 try:
     config_fp = open("config-%s" % target_arch)
 except:
     print "Unable to open config file 'config-%s'" % target_arch
     sys.exit(1)

 #
 # Open and prepare output files.
 #
 try:
     c_fp = open("%s/InterpC-%s.cpp" % (output_dir, target_arch), "w")
     asm_fp = open("%s/InterpAsm-%s.S" % (output_dir, target_arch), "w")
 except:
     print "Unable to open output files"
     print "Make sure directory '%s' exists and existing files are writable" \
             % output_dir
     # Ideally we'd remove the files to avoid confusing "make", but if they
     # failed to open we probably won't be able to remove them either.
     sys.exit(1)

 print "Generating %s, %s" % (c_fp.name, asm_fp.name)

 file_header = """/*
  * This file was generated automatically by gen-mterp.py for '%s'.
  *
  * --> DO NOT EDIT <--
  */

 """ % (target_arch)

 c_fp.write(file_header)
 asm_fp.write(file_header)

 #
 # Process the config file.
 #
 failed = False
 try:
     for line in config_fp:
         line = line.strip()         # remove CRLF, leading spaces
         tokens = line.split(' ')    # tokenize
         #print "%d: %s" % (len(tokens), tokens)
         if len(tokens[0]) == 0:
             #print "  blank"
             pass
         elif tokens[0][0] == '#':
             #print "  comment"
             pass
         else:
             if tokens[0] == "handler-size":
                 setHandlerSize(tokens)
             elif tokens[0] == "import":
                 importFile(tokens)
             elif tokens[0] == "asm-stub":
                 setAsmStub(tokens)
             elif tokens[0] == "asm-alt-stub":
                 setAsmAltStub(tokens)
             elif tokens[0] == "op-start":
                 opStart(tokens)
             elif tokens[0] == "op-end":
                 opEnd(tokens)
             elif tokens[0] == "alt":
                 altEntry(tokens)
             elif tokens[0] == "op":
                 opEntry(tokens)
             elif tokens[0] == "handler-style":
                 setHandlerStyle(tokens)
             elif tokens[0] == "alt-ops":
                 genaltop(tokens)
             elif tokens[0] == "split-ops":
                 splitops = True
             else:
                 raise DataParseError, "unrecognized command '%s'" % tokens[0]
             if style == None:
                 print "tokens[0] = %s" % tokens[0]
                 raise DataParseError, "handler-style must be first command"
 except DataParseError, err:
     print "Failed: " + str(err)
     # TODO: remove output files so "make" doesn't get confused
     failed = True
     c_fp.close()
     asm_fp.close()
     c_fp = asm_fp = None

 config_fp.close()

 #
 # Done!
 #
 if c_fp:
     c_fp.close()
 if asm_fp:
     asm_fp.close()

 sys.exit(failed)
	#!/usr/bin/env python
	#
	# Copyright (C) 2007 The Android Open Source Project
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.

	#
	# Using instructions from an architecture-specific config file, generate C
	# and assembly source files for the Dalvik interpreter.
	#

	import sys, string, re, time
	from string import Template

	interp_defs_file = "../../libdex/DexOpcodes.h" # need opcode list
	kNumPackedOpcodes = 512 # TODO: Derive this from DexOpcodes.h.

	splitops = False
	verbose = False
	handler_size_bits = -1000
	handler_size_bytes = -1000
	in_op_start = 0 # 0=not started, 1=started, 2=ended
	in_alt_op_start = 0 # 0=not started, 1=started, 2=ended
	default_op_dir = None
	default_alt_stub = None
	opcode_locations = {}
	alt_opcode_locations = {}
	asm_stub_text = []
	label_prefix = ".L" # use ".L" to hide labels from gdb
	alt_label_prefix = ".L_ALT" # use ".L" to hide labels from gdb
	style = None # interpreter style
	generate_alt_table = False

	# Exception class.
	class DataParseError(SyntaxError):
	"Failure when parsing data file"

	#
	# Set any omnipresent substitution values.
	#
	def getGlobalSubDict():
	return { "handler_size_bits":handler_size_bits,
	"handler_size_bytes":handler_size_bytes }

	#
	# Parse arch config file --
	# Set interpreter style.
	#
	def setHandlerStyle(tokens):
	global style
	if len(tokens) != 2:
	raise DataParseError("handler-style requires one argument")
	style = tokens[1]
	if style != "computed-goto" and style != "jump-table" and style != "all-c":
	raise DataParseError("handler-style (%s) invalid" % style)

	#
	# Parse arch config file --
	# Set handler_size_bytes to the value of tokens[1], and handler_size_bits to
	# log2(handler_size_bytes). Throws an exception if "bytes" is not 0 or
	# a power of two.
	#
	def setHandlerSize(tokens):
	global handler_size_bits, handler_size_bytes
	if style != "computed-goto":
	print "Warning: handler-size valid only for computed-goto interpreters"
	if len(tokens) != 2:
	raise DataParseError("handler-size requires one argument")
	if handler_size_bits != -1000:
	raise DataParseError("handler-size may only be set once")

	# compute log2(n), and make sure n is 0 or a power of 2
	handler_size_bytes = bytes = int(tokens[1])
	bits = -1
	while bytes > 0:
	bytes //= 2 # halve with truncating division
	bits += 1

	if handler_size_bytes == 0 or handler_size_bytes != (1 << bits):
	raise DataParseError("handler-size (%d) must be power of 2" \
	% orig_bytes)
	handler_size_bits = bits

	#
	# Parse arch config file --
	# Copy a file in to the C or asm output file.
	#
	def importFile(tokens):
	if len(tokens) != 2:
	raise DataParseError("import requires one argument")
	source = tokens[1]
	if source.endswith(".cpp"):
	appendSourceFile(tokens[1], getGlobalSubDict(), c_fp, None)
	elif source.endswith(".S"):
	appendSourceFile(tokens[1], getGlobalSubDict(), asm_fp, None)
	else:
	raise DataParseError("don't know how to import %s (expecting .cpp/.S)"
	% source)

	#
	# Parse arch config file --
	# Copy a file in to the C or asm output file.
	#
	def setAsmStub(tokens):
	global asm_stub_text
	if style == "all-c":
	print "Warning: asm-stub ignored for all-c interpreter"
	if len(tokens) != 2:
	raise DataParseError("import requires one argument")
	try:
	stub_fp = open(tokens[1])
	asm_stub_text = stub_fp.readlines()
	except IOError, err:
	stub_fp.close()
	raise DataParseError("unable to load asm-stub: %s" % str(err))
	stub_fp.close()

	#
	# Parse arch config file --
	# Record location of default alt stub
	#
	def setAsmAltStub(tokens):
	global default_alt_stub, generate_alt_table
	if style == "all-c":
	print "Warning: asm-alt-stub ingored for all-c interpreter"
	if len(tokens) != 2:
	raise DataParseError("import requires one argument")
	default_alt_stub = tokens[1]
	generate_alt_table = True

	#
	# Parse arch config file --
	# Start of opcode list.
	#
	def opStart(tokens):
	global in_op_start
	global default_op_dir
	if len(tokens) != 2:
	raise DataParseError("opStart takes a directory name argument")
	if in_op_start != 0:
	raise DataParseError("opStart can only be specified once")
	default_op_dir = tokens[1]
	in_op_start = 1

	#
	# Parse arch config file --
	# Set location of a single alt opcode's source file.
	#
	def altEntry(tokens):
	global generate_alt_table
	if len(tokens) != 3:
	raise DataParseError("alt requires exactly two arguments")
	if in_op_start != 1:
	raise DataParseError("alt statements must be between opStart/opEnd")
	try:
	index = opcodes.index(tokens[1])
	except ValueError:
	raise DataParseError("unknown opcode %s" % tokens[1])
	if alt_opcode_locations.has_key(tokens[1]):
	print "Note: alt overrides earlier %s (%s -> %s)" \
	% (tokens[1], alt_opcode_locations[tokens[1]], tokens[2])
	alt_opcode_locations[tokens[1]] = tokens[2]
	generate_alt_table = True

	#
	# Parse arch config file --
	# Set location of a single opcode's source file.
	#
	def opEntry(tokens):
	#global opcode_locations
	if len(tokens) != 3:
	raise DataParseError("op requires exactly two arguments")
	if in_op_start != 1:
	raise DataParseError("op statements must be between opStart/opEnd")
	try:
	index = opcodes.index(tokens[1])
	except ValueError:
	raise DataParseError("unknown opcode %s" % tokens[1])
	if opcode_locations.has_key(tokens[1]):
	print "Note: op overrides earlier %s (%s -> %s)" \
	% (tokens[1], opcode_locations[tokens[1]], tokens[2])
	opcode_locations[tokens[1]] = tokens[2]

	#
	# Emit jump table
	#
	def emitJmpTable(start_label, prefix):
	asm_fp.write("\n .global %s\n" % start_label)
	asm_fp.write(" .text\n")
	asm_fp.write("%s:\n" % start_label)
	for i in xrange(kNumPackedOpcodes):
	op = opcodes[i]
	dict = getGlobalSubDict()
	dict.update({ "opcode":op, "opnum":i })
	asm_fp.write(" .long " + prefix + \
	"_%(opcode)s /* 0x%(opnum)02x */\n" % dict)

	#
	# Parse arch config file --
	# End of opcode list; emit instruction blocks.
	#
	def opEnd(tokens):
	global in_op_start
	if len(tokens) != 1:
	raise DataParseError("opEnd takes no arguments")
	if in_op_start != 1:
	raise DataParseError("opEnd must follow opStart, and only appear once")
	in_op_start = 2

	loadAndEmitOpcodes()
	if splitops == False:
	if generate_alt_table:
	loadAndEmitAltOpcodes()
	if style == "jump-table":
	emitJmpTable("dvmAsmInstructionStart", label_prefix);
	emitJmpTable("dvmAsmAltInstructionStart", alt_label_prefix);

	def genaltop(tokens):
	if in_op_start != 2:
	raise DataParseError("alt-op can be specified only after op-end")
	if len(tokens) != 1:
	raise DataParseError("opEnd takes no arguments")
	if generate_alt_table:
	loadAndEmitAltOpcodes()
	if style == "jump-table":
	emitJmpTable("dvmAsmInstructionStart", label_prefix);
	emitJmpTable("dvmAsmAltInstructionStart", alt_label_prefix);


	#
	# Extract an ordered list of instructions from the VM sources. We use the
	# "goto table" definition macro, which has exactly kNumPackedOpcodes
	# entries.
	#
	def getOpcodeList():
	opcodes = []
	opcode_fp = open(interp_defs_file)
	opcode_re = re.compile(r"^\sH\(OP_(\w+)\),.", re.DOTALL)
	for line in opcode_fp:
	match = opcode_re.match(line)
	if not match:
	continue
	opcodes.append("OP_" + match.group(1))
	opcode_fp.close()

	if len(opcodes) != kNumPackedOpcodes:
	print "ERROR: found %d opcodes in Interp.h (expected %d)" \
	% (len(opcodes), kNumPackedOpcodes)
	raise SyntaxError, "bad opcode count"
	return opcodes

	def emitAlign():
	if style == "computed-goto":
	asm_fp.write(" .balign %d\n" % handler_size_bytes)

	#
	# Load and emit opcodes for all kNumPackedOpcodes instructions.
	#
	def loadAndEmitOpcodes():
	sister_list = []
	assert len(opcodes) == kNumPackedOpcodes
	need_dummy_start = False
	if style == "jump-table":
	start_label = "dvmAsmInstructionStartCode"
	end_label = "dvmAsmInstructionEndCode"
	else:
	start_label = "dvmAsmInstructionStart"
	end_label = "dvmAsmInstructionEnd"

	# point dvmAsmInstructionStart at the first handler or stub
	asm_fp.write("\n .global %s\n" % start_label)
	asm_fp.write(" .type %s, %%function\n" % start_label)
	asm_fp.write("%s = " % start_label + label_prefix + "_OP_NOP\n")
	asm_fp.write(" .text\n\n")

	for i in xrange(kNumPackedOpcodes):
	op = opcodes[i]

	if opcode_locations.has_key(op):
	location = opcode_locations[op]
	else:
	location = default_op_dir

	if location == "c":
	loadAndEmitC(location, i)
	if len(asm_stub_text) == 0:
	need_dummy_start = True
	else:
	loadAndEmitAsm(location, i, sister_list)

	# For a 100% C implementation, there are no asm handlers or stubs. We
	# need to have the dvmAsmInstructionStart label point at OP_NOP, and it's
	# too annoying to try to slide it in after the alignment psuedo-op, so
	# we take the low road and just emit a dummy OP_NOP here.
	if need_dummy_start:
	emitAlign()
	asm_fp.write(label_prefix + "_OP_NOP: /* dummy */\n");

	emitAlign()
	asm_fp.write(" .size %s, .-%s\n" % (start_label, start_label))
	asm_fp.write(" .global %s\n" % end_label)
	asm_fp.write("%s:\n" % end_label)

	if style == "computed-goto":
	emitSectionComment("Sister implementations", asm_fp)
	asm_fp.write(" .global dvmAsmSisterStart\n")
	asm_fp.write(" .type dvmAsmSisterStart, %function\n")
	asm_fp.write(" .text\n")
	asm_fp.write(" .balign 4\n")
	asm_fp.write("dvmAsmSisterStart:\n")
	asm_fp.writelines(sister_list)
	asm_fp.write("\n .size dvmAsmSisterStart, .-dvmAsmSisterStart\n")
	asm_fp.write(" .global dvmAsmSisterEnd\n")
	asm_fp.write("dvmAsmSisterEnd:\n\n")

	#
	# Load an alternate entry stub
	#
	def loadAndEmitAltStub(source, opindex):
	op = opcodes[opindex]
	if verbose:
	print " alt emit %s --> stub" % source
	dict = getGlobalSubDict()
	dict.update({ "opcode":op, "opnum":opindex })

	emitAsmHeader(asm_fp, dict, alt_label_prefix)
	appendSourceFile(source, dict, asm_fp, None)

	#
	# Load and emit alternate opcodes for all kNumPackedOpcodes instructions.
	#
	def loadAndEmitAltOpcodes():
	assert len(opcodes) == kNumPackedOpcodes
	if style == "jump-table":
	start_label = "dvmAsmAltInstructionStartCode"
	end_label = "dvmAsmAltInstructionEndCode"
	else:
	start_label = "dvmAsmAltInstructionStart"
	end_label = "dvmAsmAltInstructionEnd"

	# point dvmAsmInstructionStart at the first handler or stub
	asm_fp.write("\n .global %s\n" % start_label)
	asm_fp.write(" .type %s, %%function\n" % start_label)
	asm_fp.write(" .text\n\n")
	asm_fp.write("%s = " % start_label + label_prefix + "_ALT_OP_NOP\n")

	for i in xrange(kNumPackedOpcodes):
	op = opcodes[i]
	if alt_opcode_locations.has_key(op):
	source = "%s/ALT_%s.S" % (alt_opcode_locations[op], op)
	else:
	source = default_alt_stub
	loadAndEmitAltStub(source, i)

	emitAlign()
	asm_fp.write(" .size %s, .-%s\n" % (start_label, start_label))
	asm_fp.write(" .global %s\n" % end_label)
	asm_fp.write("%s:\n" % end_label)

	#
	# Load a C fragment and emit it, then output an assembly stub.
	#
	def loadAndEmitC(location, opindex):
	op = opcodes[opindex]
	source = "%s/%s.cpp" % (location, op)
	if verbose:
	print " emit %s --> C++" % source
	dict = getGlobalSubDict()
	dict.update({ "opcode":op, "opnum":opindex })

	appendSourceFile(source, dict, c_fp, None)

	if len(asm_stub_text) != 0:
	emitAsmStub(asm_fp, dict)

	#
	# Load an assembly fragment and emit it.
	#
	def loadAndEmitAsm(location, opindex, sister_list):
	op = opcodes[opindex]
	source = "%s/%s.S" % (location, op)
	dict = getGlobalSubDict()
	dict.update({ "opcode":op, "opnum":opindex })
	if verbose:
	print " emit %s --> asm" % source

	emitAsmHeader(asm_fp, dict, label_prefix)
	appendSourceFile(source, dict, asm_fp, sister_list)

	#
	# Output the alignment directive and label for an assembly piece.
	#
	def emitAsmHeader(outfp, dict, prefix):
	outfp.write("/* ------------------------------ */\n")
	# The alignment directive ensures that the handler occupies
	# at least the correct amount of space. We don't try to deal
	# with overflow here.
	emitAlign()
	# Emit a label so that gdb will say the right thing. We prepend an
	# underscore so the symbol name doesn't clash with the Opcode enum.
	outfp.write(prefix + "_%(opcode)s: /* 0x%(opnum)02x */\n" % dict)

	#
	# Output a generic instruction stub that updates the "glue" struct and
	# calls the C implementation.
	#
	def emitAsmStub(outfp, dict):
	emitAsmHeader(outfp, dict, label_prefix)
	for line in asm_stub_text:
	templ = Template(line)
	outfp.write(templ.substitute(dict))

	#
	# Append the file specified by "source" to the open "outfp". Each line will
	# be template-replaced using the substitution dictionary "dict".
	#
	# If the first line of the file starts with "%" it is taken as a directive.
	# A "%include" line contains a filename and, optionally, a Python-style
	# dictionary declaration with substitution strings. (This is implemented
	# with recursion.)
	#
	# If "sister_list" is provided, and we find a line that contains only "&",
	# all subsequent lines from the file will be appended to sister_list instead
	# of copied to the output.
	#
	# This may modify "dict".
	#
	def appendSourceFile(source, dict, outfp, sister_list):
	outfp.write("/* File: %s */\n" % source)
	infp = open(source, "r")
	in_sister = False
	for line in infp:
	if line.startswith("%include"):
	# Parse the "include" line
	tokens = line.strip().split(' ', 2)
	if len(tokens) < 2:
	raise DataParseError("malformed %%include in %s" % source)

	alt_source = tokens[1].strip("\"")
	if alt_source == source:
	raise DataParseError("self-referential %%include in %s"
	% source)

	new_dict = dict.copy()
	if len(tokens) == 3:
	new_dict.update(eval(tokens[2]))
	#print " including src=%s dict=%s" % (alt_source, new_dict)
	appendSourceFile(alt_source, new_dict, outfp, sister_list)
	continue

	elif line.startswith("%default"):
	# copy keywords into dictionary
	tokens = line.strip().split(' ', 1)
	if len(tokens) < 2:
	raise DataParseError("malformed %%default in %s" % source)
	defaultValues = eval(tokens[1])
	for entry in defaultValues:
	dict.setdefault(entry, defaultValues[entry])
	continue

	elif line.startswith("%verify"):
	# more to come, someday
	continue

	elif line.startswith("%break") and sister_list != None:
	# allow more than one %break, ignoring all following the first
	if style == "computed-goto" and not in_sister:
	in_sister = True
	sister_list.append("\n/* continuation for %(opcode)s */\n"%dict)
	continue

	# perform keyword substitution if a dictionary was provided
	if dict != None:
	templ = Template(line)
	try:
	subline = templ.substitute(dict)
	except KeyError, err:
	raise DataParseError("keyword substitution failed in %s: %s"
	% (source, str(err)))
	except:
	print "ERROR: substitution failed: " + line
	raise
	else:
	subline = line

	# write output to appropriate file
	if in_sister:
	sister_list.append(subline)
	else:
	outfp.write(subline)
	outfp.write("\n")
	infp.close()

	#
	# Emit a C-style section header comment.
	#
	def emitSectionComment(str, fp):
	equals = "========================================" \
	"==================================="

	fp.write("\n/\n %s\n * %s\n * %s\n */\n" %
	(equals, str, equals))


	#
	# ===========================================================================
	# "main" code
	#

	#
	# Check args.
	#
	if len(sys.argv) != 3:
	print "Usage: %s target-arch output-dir" % sys.argv[0]
	sys.exit(2)

	target_arch = sys.argv[1]
	output_dir = sys.argv[2]

	#
	# Extract opcode list.
	#
	opcodes = getOpcodeList()
	#for op in opcodes:
	# print " %s" % op

	#
	# Open config file.
	#
	try:
	config_fp = open("config-%s" % target_arch)
	except:
	print "Unable to open config file 'config-%s'" % target_arch
	sys.exit(1)

	#
	# Open and prepare output files.
	#
	try:
	c_fp = open("%s/InterpC-%s.cpp" % (output_dir, target_arch), "w")
	asm_fp = open("%s/InterpAsm-%s.S" % (output_dir, target_arch), "w")
	except:
	print "Unable to open output files"
	print "Make sure directory '%s' exists and existing files are writable" \
	% output_dir
	# Ideally we'd remove the files to avoid confusing "make", but if they
	# failed to open we probably won't be able to remove them either.
	sys.exit(1)

	print "Generating %s, %s" % (c_fp.name, asm_fp.name)

	file_header = """/*
	* This file was generated automatically by gen-mterp.py for '%s'.
	*
	* --> DO NOT EDIT <--
	*/

	""" % (target_arch)

	c_fp.write(file_header)
	asm_fp.write(file_header)

	#
	# Process the config file.
	#
	failed = False
	try:
	for line in config_fp:
	line = line.strip() # remove CRLF, leading spaces
	tokens = line.split(' ') # tokenize
	#print "%d: %s" % (len(tokens), tokens)
	if len(tokens[0]) == 0:
	#print " blank"
	pass
	elif tokens[0][0] == '#':
	#print " comment"
	pass
	else:
	if tokens[0] == "handler-size":
	setHandlerSize(tokens)
	elif tokens[0] == "import":
	importFile(tokens)
	elif tokens[0] == "asm-stub":
	setAsmStub(tokens)
	elif tokens[0] == "asm-alt-stub":
	setAsmAltStub(tokens)
	elif tokens[0] == "op-start":
	opStart(tokens)
	elif tokens[0] == "op-end":
	opEnd(tokens)
	elif tokens[0] == "alt":
	altEntry(tokens)
	elif tokens[0] == "op":
	opEntry(tokens)
	elif tokens[0] == "handler-style":
	setHandlerStyle(tokens)
	elif tokens[0] == "alt-ops":
	genaltop(tokens)
	elif tokens[0] == "split-ops":
	splitops = True
	else:
	raise DataParseError, "unrecognized command '%s'" % tokens[0]
	if style == None:
	print "tokens[0] = %s" % tokens[0]
	raise DataParseError, "handler-style must be first command"
	except DataParseError, err:
	print "Failed: " + str(err)
	# TODO: remove output files so "make" doesn't get confused
	failed = True
	c_fp.close()
	asm_fp.close()
	c_fp = asm_fp = None

	config_fp.close()

	#
	# Done!
	#
	if c_fp:
	c_fp.close()
	if asm_fp:
	asm_fp.close()

	sys.exit(failed)