Gitiles
Code Review Sign In
gerrit-public.fairphone.software / platform / dalvik / 5387824f19033ed51a945fbc8c2b574998404b3d / . / libdex / OpCode.h
blob: 4dfd0471ce179ac90349701aa23d337b3b2148ee [file] [log] [blame]
The Android Open Source Projectf6c38712009-03-03 19:28:47 -0800[diff] [blame]1/*
2 * Copyright (C) 2008 The Android Open Source Project
3 *
4 * Licensed under the Apache License, Version 2.0 (the "License");
5 * you may not use this file except in compliance with the License.
6 * You may obtain a copy of the License at
7 *
8 * http://www.apache.org/licenses/LICENSE-2.0
9 *
10 * Unless required by applicable law or agreed to in writing, software
11 * distributed under the License is distributed on an "AS IS" BASIS,
12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13 * See the License for the specific language governing permissions and
14 * limitations under the License.
15 */
16
17/*
18 * Dalvik opcode enumeration.
19 */
20#ifndef _LIBDEX_OPCODE
21#define _LIBDEX_OPCODE
22
23/*
24 * If you add, delete, or renumber instructions, you need to change things
25 * in various places. Renumbering really only affects the "unused" opcodes,
26 * which are given explicit enumeration values to make it easier to find
27 * the places in the code that need to be updated when making changes --
28 * if you replace "OP_UNUSED_2D" and neglect to update a switch statement,
29 * the compiler will complain about an unknown value.
30 *
31 * Opcode definitions and attributes:
32 * - update the OpCode enum below
33 * - update the "goto table" definition macro, DEFINE_GOTO_TABLE(), below
34 * - update the instruction info table generators and (if you changed an
35 * instruction format) instruction decoder in InstrUtils.c
36 * - update the instruction format list in InstrUtils.h, if necessary
37 * - update the parallel definitions in the class dalvik.bytecode.Opcodes
38 *
39 * Interpreter:
40 * - implement/update the instruction in C in mterp/c/...
41 * - verify new code by running with "dalvik.vm.execution-mode =
42 * int:portable" or "-Xint:portable"
43 * - implement/update the instruction in ARM in mterp/armv5/...
44 * - verify by enabling ARM handler for that instruction in mterp config
45 * and running int:fast as above
46 * - repeat for other platforms (x86, ...)
47 * (see notes in mterp/ReadMe.txt for rebuilding instructions)
48 *
49 * Verifier / optimizer:
50 * - update some stuff in analysis/DexOptimize.c, analysis/DexVerify.c,
51 * and/or analysis/CodeVerify.c as needed
52 * - verify by running with verifier enabled (it's on by default)
53 *
54 * Tools:
55 * - update the OpCodeNames table in dexdump/OpCodeNames.c
56 * - update dexdump/DexDump.c if an instruction format has changed
57 *
58 * Note: The Dalvik VM tests (in the tests subdirectory) provide a convenient
59 * way to test most of the above without doing any rebuilds. In particular,
60 * test 003-omnibus-opcodes will exercise most of the opcodes.
61 */
62
63/*
64 * Dalvik opcode list.
65 */
66typedef enum OpCode {
67 OP_NOP = 0x00,
68
69 OP_MOVE = 0x01,
70 OP_MOVE_FROM16 = 0x02,
71 OP_MOVE_16 = 0x03,
72 OP_MOVE_WIDE = 0x04,
73 OP_MOVE_WIDE_FROM16 = 0x05,
74 OP_MOVE_WIDE_16 = 0x06,
75 OP_MOVE_OBJECT = 0x07,
76 OP_MOVE_OBJECT_FROM16 = 0x08,
77 OP_MOVE_OBJECT_16 = 0x09,
78
79 OP_MOVE_RESULT = 0x0a,
80 OP_MOVE_RESULT_WIDE = 0x0b,
81 OP_MOVE_RESULT_OBJECT = 0x0c,
82 OP_MOVE_EXCEPTION = 0x0d,
83
84 OP_RETURN_VOID = 0x0e,
85 OP_RETURN = 0x0f,
86 OP_RETURN_WIDE = 0x10,
87 OP_RETURN_OBJECT = 0x11,
88
89 OP_CONST_4 = 0x12,
90 OP_CONST_16 = 0x13,
91 OP_CONST = 0x14,
92 OP_CONST_HIGH16 = 0x15,
93 OP_CONST_WIDE_16 = 0x16,
94 OP_CONST_WIDE_32 = 0x17,
95 OP_CONST_WIDE = 0x18,
96 OP_CONST_WIDE_HIGH16 = 0x19,
97 OP_CONST_STRING = 0x1a,
98 OP_CONST_STRING_JUMBO = 0x1b,
99 OP_CONST_CLASS = 0x1c,
100
101 OP_MONITOR_ENTER = 0x1d,
102 OP_MONITOR_EXIT = 0x1e,
103
104 OP_CHECK_CAST = 0x1f,
105 OP_INSTANCE_OF = 0x20,
106
107 OP_ARRAY_LENGTH = 0x21,
108
109 OP_NEW_INSTANCE = 0x22,
110 OP_NEW_ARRAY = 0x23,
111
112 OP_FILLED_NEW_ARRAY = 0x24,
113 OP_FILLED_NEW_ARRAY_RANGE = 0x25,
114 OP_FILL_ARRAY_DATA = 0x26,
115
116 OP_THROW = 0x27,
117 OP_GOTO = 0x28,
118 OP_GOTO_16 = 0x29,
119 OP_GOTO_32 = 0x2a,
120 OP_PACKED_SWITCH = 0x2b,
121 OP_SPARSE_SWITCH = 0x2c,
122
123 OP_CMPL_FLOAT = 0x2d,
124 OP_CMPG_FLOAT = 0x2e,
125 OP_CMPL_DOUBLE = 0x2f,
126 OP_CMPG_DOUBLE = 0x30,
127 OP_CMP_LONG = 0x31,
128
129 OP_IF_EQ = 0x32,
130 OP_IF_NE = 0x33,
131 OP_IF_LT = 0x34,
132 OP_IF_GE = 0x35,
133 OP_IF_GT = 0x36,
134 OP_IF_LE = 0x37,
135 OP_IF_EQZ = 0x38,
136 OP_IF_NEZ = 0x39,
137 OP_IF_LTZ = 0x3a,
138 OP_IF_GEZ = 0x3b,
139 OP_IF_GTZ = 0x3c,
140 OP_IF_LEZ = 0x3d,
141
142 OP_UNUSED_3E = 0x3e,
143 OP_UNUSED_3F = 0x3f,
144 OP_UNUSED_40 = 0x40,
145 OP_UNUSED_41 = 0x41,
146 OP_UNUSED_42 = 0x42,
147 OP_UNUSED_43 = 0x43,
148
149 OP_AGET = 0x44,
150 OP_AGET_WIDE = 0x45,
151 OP_AGET_OBJECT = 0x46,
152 OP_AGET_BOOLEAN = 0x47,
153 OP_AGET_BYTE = 0x48,
154 OP_AGET_CHAR = 0x49,
155 OP_AGET_SHORT = 0x4a,
156 OP_APUT = 0x4b,
157 OP_APUT_WIDE = 0x4c,
158 OP_APUT_OBJECT = 0x4d,
159 OP_APUT_BOOLEAN = 0x4e,
160 OP_APUT_BYTE = 0x4f,
161 OP_APUT_CHAR = 0x50,
162 OP_APUT_SHORT = 0x51,
163
164 OP_IGET = 0x52,
165 OP_IGET_WIDE = 0x53,
166 OP_IGET_OBJECT = 0x54,
167 OP_IGET_BOOLEAN = 0x55,
168 OP_IGET_BYTE = 0x56,
169 OP_IGET_CHAR = 0x57,
170 OP_IGET_SHORT = 0x58,
171 OP_IPUT = 0x59,
172 OP_IPUT_WIDE = 0x5a,
173 OP_IPUT_OBJECT = 0x5b,
174 OP_IPUT_BOOLEAN = 0x5c,
175 OP_IPUT_BYTE = 0x5d,
176 OP_IPUT_CHAR = 0x5e,
177 OP_IPUT_SHORT = 0x5f,
178
179 OP_SGET = 0x60,
180 OP_SGET_WIDE = 0x61,
181 OP_SGET_OBJECT = 0x62,
182 OP_SGET_BOOLEAN = 0x63,
183 OP_SGET_BYTE = 0x64,
184 OP_SGET_CHAR = 0x65,
185 OP_SGET_SHORT = 0x66,
186 OP_SPUT = 0x67,
187 OP_SPUT_WIDE = 0x68,
188 OP_SPUT_OBJECT = 0x69,
189 OP_SPUT_BOOLEAN = 0x6a,
190 OP_SPUT_BYTE = 0x6b,
191 OP_SPUT_CHAR = 0x6c,
192 OP_SPUT_SHORT = 0x6d,
193
194 OP_INVOKE_VIRTUAL = 0x6e,
195 OP_INVOKE_SUPER = 0x6f,
196 OP_INVOKE_DIRECT = 0x70,
197 OP_INVOKE_STATIC = 0x71,
198 OP_INVOKE_INTERFACE = 0x72,
199
200 OP_UNUSED_73 = 0x73,
201
202 OP_INVOKE_VIRTUAL_RANGE = 0x74,
203 OP_INVOKE_SUPER_RANGE = 0x75,
204 OP_INVOKE_DIRECT_RANGE = 0x76,
205 OP_INVOKE_STATIC_RANGE = 0x77,
206 OP_INVOKE_INTERFACE_RANGE = 0x78,
207
208 OP_UNUSED_79 = 0x79,
209 OP_UNUSED_7A = 0x7a,
210
211 OP_NEG_INT = 0x7b,
212 OP_NOT_INT = 0x7c,
213 OP_NEG_LONG = 0x7d,
214 OP_NOT_LONG = 0x7e,
215 OP_NEG_FLOAT = 0x7f,
216 OP_NEG_DOUBLE = 0x80,
217 OP_INT_TO_LONG = 0x81,
218 OP_INT_TO_FLOAT = 0x82,
219 OP_INT_TO_DOUBLE = 0x83,
220 OP_LONG_TO_INT = 0x84,
221 OP_LONG_TO_FLOAT = 0x85,
222 OP_LONG_TO_DOUBLE = 0x86,
223 OP_FLOAT_TO_INT = 0x87,
224 OP_FLOAT_TO_LONG = 0x88,
225 OP_FLOAT_TO_DOUBLE = 0x89,
226 OP_DOUBLE_TO_INT = 0x8a,
227 OP_DOUBLE_TO_LONG = 0x8b,
228 OP_DOUBLE_TO_FLOAT = 0x8c,
229 OP_INT_TO_BYTE = 0x8d,
230 OP_INT_TO_CHAR = 0x8e,
231 OP_INT_TO_SHORT = 0x8f,
232
233 OP_ADD_INT = 0x90,
234 OP_SUB_INT = 0x91,
235 OP_MUL_INT = 0x92,
236 OP_DIV_INT = 0x93,
237 OP_REM_INT = 0x94,
238 OP_AND_INT = 0x95,
239 OP_OR_INT = 0x96,
240 OP_XOR_INT = 0x97,
241 OP_SHL_INT = 0x98,
242 OP_SHR_INT = 0x99,
243 OP_USHR_INT = 0x9a,
244
245 OP_ADD_LONG = 0x9b,
246 OP_SUB_LONG = 0x9c,
247 OP_MUL_LONG = 0x9d,
248 OP_DIV_LONG = 0x9e,
249 OP_REM_LONG = 0x9f,
250 OP_AND_LONG = 0xa0,
251 OP_OR_LONG = 0xa1,
252 OP_XOR_LONG = 0xa2,
253 OP_SHL_LONG = 0xa3,
254 OP_SHR_LONG = 0xa4,
255 OP_USHR_LONG = 0xa5,
256
257 OP_ADD_FLOAT = 0xa6,
258 OP_SUB_FLOAT = 0xa7,
259 OP_MUL_FLOAT = 0xa8,
260 OP_DIV_FLOAT = 0xa9,
261 OP_REM_FLOAT = 0xaa,
262 OP_ADD_DOUBLE = 0xab,
263 OP_SUB_DOUBLE = 0xac,
264 OP_MUL_DOUBLE = 0xad,
265 OP_DIV_DOUBLE = 0xae,
266 OP_REM_DOUBLE = 0xaf,
267
268 OP_ADD_INT_2ADDR = 0xb0,
269 OP_SUB_INT_2ADDR = 0xb1,
270 OP_MUL_INT_2ADDR = 0xb2,
271 OP_DIV_INT_2ADDR = 0xb3,
272 OP_REM_INT_2ADDR = 0xb4,
273 OP_AND_INT_2ADDR = 0xb5,
274 OP_OR_INT_2ADDR = 0xb6,
275 OP_XOR_INT_2ADDR = 0xb7,
276 OP_SHL_INT_2ADDR = 0xb8,
277 OP_SHR_INT_2ADDR = 0xb9,
278 OP_USHR_INT_2ADDR = 0xba,
279
280 OP_ADD_LONG_2ADDR = 0xbb,
281 OP_SUB_LONG_2ADDR = 0xbc,
282 OP_MUL_LONG_2ADDR = 0xbd,
283 OP_DIV_LONG_2ADDR = 0xbe,
284 OP_REM_LONG_2ADDR = 0xbf,
285 OP_AND_LONG_2ADDR = 0xc0,
286 OP_OR_LONG_2ADDR = 0xc1,
287 OP_XOR_LONG_2ADDR = 0xc2,
288 OP_SHL_LONG_2ADDR = 0xc3,
289 OP_SHR_LONG_2ADDR = 0xc4,
290 OP_USHR_LONG_2ADDR = 0xc5,
291
292 OP_ADD_FLOAT_2ADDR = 0xc6,
293 OP_SUB_FLOAT_2ADDR = 0xc7,
294 OP_MUL_FLOAT_2ADDR = 0xc8,
295 OP_DIV_FLOAT_2ADDR = 0xc9,
296 OP_REM_FLOAT_2ADDR = 0xca,
297 OP_ADD_DOUBLE_2ADDR = 0xcb,
298 OP_SUB_DOUBLE_2ADDR = 0xcc,
299 OP_MUL_DOUBLE_2ADDR = 0xcd,
300 OP_DIV_DOUBLE_2ADDR = 0xce,
301 OP_REM_DOUBLE_2ADDR = 0xcf,
302
303 OP_ADD_INT_LIT16 = 0xd0,
304 OP_RSUB_INT = 0xd1, /* no _LIT16 suffix for this */
305 OP_MUL_INT_LIT16 = 0xd2,
306 OP_DIV_INT_LIT16 = 0xd3,
307 OP_REM_INT_LIT16 = 0xd4,
308 OP_AND_INT_LIT16 = 0xd5,
309 OP_OR_INT_LIT16 = 0xd6,
310 OP_XOR_INT_LIT16 = 0xd7,
311
312 OP_ADD_INT_LIT8 = 0xd8,
313 OP_RSUB_INT_LIT8 = 0xd9,
314 OP_MUL_INT_LIT8 = 0xda,
315 OP_DIV_INT_LIT8 = 0xdb,
316 OP_REM_INT_LIT8 = 0xdc,
317 OP_AND_INT_LIT8 = 0xdd,
318 OP_OR_INT_LIT8 = 0xde,
319 OP_XOR_INT_LIT8 = 0xdf,
320 OP_SHL_INT_LIT8 = 0xe0,
321 OP_SHR_INT_LIT8 = 0xe1,
322 OP_USHR_INT_LIT8 = 0xe2,
323
324 OP_UNUSED_E3 = 0xe3,
325 OP_UNUSED_E4 = 0xe4,
326 OP_UNUSED_E5 = 0xe5,
327 OP_UNUSED_E6 = 0xe6,
328 OP_UNUSED_E7 = 0xe7,
Andy McFadden53878242010-03-05 07:24:27 -0800[diff] [blame^]329
330 /* verifier/optimizer output -- nothing below here is generated by "dx" */
331 OP_IGET_WIDE_VOLATILE = 0xe8,
332 OP_IPUT_WIDE_VOLATILE = 0xe9,
333 OP_SGET_WIDE_VOLATILE = 0xea,
334 OP_SPUT_WIDE_VOLATILE = 0xeb,
Andy McFadden96516932009-10-28 17:39:02 -0700[diff] [blame]335
336 /*
337 * The "breakpoint" instruction is special, in that it should never
338 * be seen by anything but the debug interpreter. During debugging
339 * it takes the place of an arbitrary opcode, which means operations
340 * like "tell me the opcode width so I can find the next instruction"
341 * aren't possible. (This is correctable, but probably not useful.)
342 */
343 OP_BREAKPOINT = 0xec,
The Android Open Source Projectf6c38712009-03-03 19:28:47 -0800[diff] [blame]344
Andy McFadden3a1aedb2009-05-07 13:30:23 -0700[diff] [blame]345 OP_THROW_VERIFICATION_ERROR = 0xed,
The Android Open Source Projectf6c38712009-03-03 19:28:47 -0800[diff] [blame]346 OP_EXECUTE_INLINE = 0xee,
Andy McFaddenb0a05412009-11-19 10:23:41 -0800[diff] [blame]347 OP_EXECUTE_INLINE_RANGE = 0xef,
The Android Open Source Projectf6c38712009-03-03 19:28:47 -0800[diff] [blame]348
349 OP_INVOKE_DIRECT_EMPTY = 0xf0,
350 OP_UNUSED_F1 = 0xf1, /* OP_INVOKE_DIRECT_EMPTY_RANGE? */
351 OP_IGET_QUICK = 0xf2,
352 OP_IGET_WIDE_QUICK = 0xf3,
353 OP_IGET_OBJECT_QUICK = 0xf4,
354 OP_IPUT_QUICK = 0xf5,
355 OP_IPUT_WIDE_QUICK = 0xf6,
356 OP_IPUT_OBJECT_QUICK = 0xf7,
357
358 OP_INVOKE_VIRTUAL_QUICK = 0xf8,
359 OP_INVOKE_VIRTUAL_QUICK_RANGE = 0xf9,
360 OP_INVOKE_SUPER_QUICK = 0xfa,
361 OP_INVOKE_SUPER_QUICK_RANGE = 0xfb,
362 OP_UNUSED_FC = 0xfc, /* OP_INVOKE_DIRECT_QUICK? */
363 OP_UNUSED_FD = 0xfd, /* OP_INVOKE_DIRECT_QUICK_RANGE? */
364 OP_UNUSED_FE = 0xfe, /* OP_INVOKE_INTERFACE_QUICK? */
365 OP_UNUSED_FF = 0xff, /* OP_INVOKE_INTERFACE_QUICK_RANGE*/
366} OpCode;
367
368#define kNumDalvikInstructions 256
369
Andy McFadden96516932009-10-28 17:39:02 -0700[diff] [blame]370
The Android Open Source Projectf6c38712009-03-03 19:28:47 -0800[diff] [blame]371/*
372 * Switch-statement signatures are a "NOP" followed by a code. (A true NOP
373 * is 0x0000.)
374 */
375#define kPackedSwitchSignature 0x0100
376#define kSparseSwitchSignature 0x0200
377#define kArrayDataSignature 0x0300
378
379/*
380 * Macro used to generate computed goto tables for the C interpreter.
381 *
382 * The labels here must match up with the labels in the interpreter
383 * implementation. There is no direct connection between these and the
384 * numeric definitions above, but if the two get out of sync strange things
385 * will happen.
386 */
387#define DEFINE_GOTO_TABLE(_name) \
388 static const void* _name[kNumDalvikInstructions] = { \
389 /* 00..0f */ \
390 H(OP_NOP), \
391 H(OP_MOVE), \
392 H(OP_MOVE_FROM16), \
393 H(OP_MOVE_16), \
394 H(OP_MOVE_WIDE), \
395 H(OP_MOVE_WIDE_FROM16), \
396 H(OP_MOVE_WIDE_16), \
397 H(OP_MOVE_OBJECT), \
398 H(OP_MOVE_OBJECT_FROM16), \
399 H(OP_MOVE_OBJECT_16), \
400 H(OP_MOVE_RESULT), \
401 H(OP_MOVE_RESULT_WIDE), \
402 H(OP_MOVE_RESULT_OBJECT), \
403 H(OP_MOVE_EXCEPTION), \
404 H(OP_RETURN_VOID), \
405 H(OP_RETURN), \
406 /* 10..1f */ \
407 H(OP_RETURN_WIDE), \
408 H(OP_RETURN_OBJECT), \
409 H(OP_CONST_4), \
410 H(OP_CONST_16), \
411 H(OP_CONST), \
412 H(OP_CONST_HIGH16), \
413 H(OP_CONST_WIDE_16), \
414 H(OP_CONST_WIDE_32), \
415 H(OP_CONST_WIDE), \
416 H(OP_CONST_WIDE_HIGH16), \
417 H(OP_CONST_STRING), \
418 H(OP_CONST_STRING_JUMBO), \
419 H(OP_CONST_CLASS), \
420 H(OP_MONITOR_ENTER), \
421 H(OP_MONITOR_EXIT), \
422 H(OP_CHECK_CAST), \
423 /* 20..2f */ \
424 H(OP_INSTANCE_OF), \
425 H(OP_ARRAY_LENGTH), \
426 H(OP_NEW_INSTANCE), \
427 H(OP_NEW_ARRAY), \
428 H(OP_FILLED_NEW_ARRAY), \
429 H(OP_FILLED_NEW_ARRAY_RANGE), \
430 H(OP_FILL_ARRAY_DATA), \
431 H(OP_THROW), \
432 H(OP_GOTO), \
433 H(OP_GOTO_16), \
434 H(OP_GOTO_32), \
435 H(OP_PACKED_SWITCH), \
436 H(OP_SPARSE_SWITCH), \
437 H(OP_CMPL_FLOAT), \
438 H(OP_CMPG_FLOAT), \
439 H(OP_CMPL_DOUBLE), \
440 /* 30..3f */ \
441 H(OP_CMPG_DOUBLE), \
442 H(OP_CMP_LONG), \
443 H(OP_IF_EQ), \
444 H(OP_IF_NE), \
445 H(OP_IF_LT), \
446 H(OP_IF_GE), \
447 H(OP_IF_GT), \
448 H(OP_IF_LE), \
449 H(OP_IF_EQZ), \
450 H(OP_IF_NEZ), \
451 H(OP_IF_LTZ), \
452 H(OP_IF_GEZ), \
453 H(OP_IF_GTZ), \
454 H(OP_IF_LEZ), \
455 H(OP_UNUSED_3E), \
456 H(OP_UNUSED_3F), \
457 /* 40..4f */ \
458 H(OP_UNUSED_40), \
459 H(OP_UNUSED_41), \
460 H(OP_UNUSED_42), \
461 H(OP_UNUSED_43), \
462 H(OP_AGET), \
463 H(OP_AGET_WIDE), \
464 H(OP_AGET_OBJECT), \
465 H(OP_AGET_BOOLEAN), \
466 H(OP_AGET_BYTE), \
467 H(OP_AGET_CHAR), \
468 H(OP_AGET_SHORT), \
469 H(OP_APUT), \
470 H(OP_APUT_WIDE), \
471 H(OP_APUT_OBJECT), \
472 H(OP_APUT_BOOLEAN), \
473 H(OP_APUT_BYTE), \
474 /* 50..5f */ \
475 H(OP_APUT_CHAR), \
476 H(OP_APUT_SHORT), \
477 H(OP_IGET), \
478 H(OP_IGET_WIDE), \
479 H(OP_IGET_OBJECT), \
480 H(OP_IGET_BOOLEAN), \
481 H(OP_IGET_BYTE), \
482 H(OP_IGET_CHAR), \
483 H(OP_IGET_SHORT), \
484 H(OP_IPUT), \
485 H(OP_IPUT_WIDE), \
486 H(OP_IPUT_OBJECT), \
487 H(OP_IPUT_BOOLEAN), \
488 H(OP_IPUT_BYTE), \
489 H(OP_IPUT_CHAR), \
490 H(OP_IPUT_SHORT), \
491 /* 60..6f */ \
492 H(OP_SGET), \
493 H(OP_SGET_WIDE), \
494 H(OP_SGET_OBJECT), \
495 H(OP_SGET_BOOLEAN), \
496 H(OP_SGET_BYTE), \
497 H(OP_SGET_CHAR), \
498 H(OP_SGET_SHORT), \
499 H(OP_SPUT), \
500 H(OP_SPUT_WIDE), \
501 H(OP_SPUT_OBJECT), \
502 H(OP_SPUT_BOOLEAN), \
503 H(OP_SPUT_BYTE), \
504 H(OP_SPUT_CHAR), \
505 H(OP_SPUT_SHORT), \
506 H(OP_INVOKE_VIRTUAL), \
507 H(OP_INVOKE_SUPER), \
508 /* 70..7f */ \
509 H(OP_INVOKE_DIRECT), \
510 H(OP_INVOKE_STATIC), \
511 H(OP_INVOKE_INTERFACE), \
512 H(OP_UNUSED_73), \
513 H(OP_INVOKE_VIRTUAL_RANGE), \
514 H(OP_INVOKE_SUPER_RANGE), \
515 H(OP_INVOKE_DIRECT_RANGE), \
516 H(OP_INVOKE_STATIC_RANGE), \
517 H(OP_INVOKE_INTERFACE_RANGE), \
518 H(OP_UNUSED_79), \
519 H(OP_UNUSED_7A), \
520 H(OP_NEG_INT), \
521 H(OP_NOT_INT), \
522 H(OP_NEG_LONG), \
523 H(OP_NOT_LONG), \
524 H(OP_NEG_FLOAT), \
525 /* 80..8f */ \
526 H(OP_NEG_DOUBLE), \
527 H(OP_INT_TO_LONG), \
528 H(OP_INT_TO_FLOAT), \
529 H(OP_INT_TO_DOUBLE), \
530 H(OP_LONG_TO_INT), \
531 H(OP_LONG_TO_FLOAT), \
532 H(OP_LONG_TO_DOUBLE), \
533 H(OP_FLOAT_TO_INT), \
534 H(OP_FLOAT_TO_LONG), \
535 H(OP_FLOAT_TO_DOUBLE), \
536 H(OP_DOUBLE_TO_INT), \
537 H(OP_DOUBLE_TO_LONG), \
538 H(OP_DOUBLE_TO_FLOAT), \
539 H(OP_INT_TO_BYTE), \
540 H(OP_INT_TO_CHAR), \
541 H(OP_INT_TO_SHORT), \
542 /* 90..9f */ \
543 H(OP_ADD_INT), \
544 H(OP_SUB_INT), \
545 H(OP_MUL_INT), \
546 H(OP_DIV_INT), \
547 H(OP_REM_INT), \
548 H(OP_AND_INT), \
549 H(OP_OR_INT), \
550 H(OP_XOR_INT), \
551 H(OP_SHL_INT), \
552 H(OP_SHR_INT), \
553 H(OP_USHR_INT), \
554 H(OP_ADD_LONG), \
555 H(OP_SUB_LONG), \
556 H(OP_MUL_LONG), \
557 H(OP_DIV_LONG), \
558 H(OP_REM_LONG), \
559 /* a0..af */ \
560 H(OP_AND_LONG), \
561 H(OP_OR_LONG), \
562 H(OP_XOR_LONG), \
563 H(OP_SHL_LONG), \
564 H(OP_SHR_LONG), \
565 H(OP_USHR_LONG), \
566 H(OP_ADD_FLOAT), \
567 H(OP_SUB_FLOAT), \
568 H(OP_MUL_FLOAT), \
569 H(OP_DIV_FLOAT), \
570 H(OP_REM_FLOAT), \
571 H(OP_ADD_DOUBLE), \
572 H(OP_SUB_DOUBLE), \
573 H(OP_MUL_DOUBLE), \
574 H(OP_DIV_DOUBLE), \
575 H(OP_REM_DOUBLE), \
576 /* b0..bf */ \
577 H(OP_ADD_INT_2ADDR), \
578 H(OP_SUB_INT_2ADDR), \
579 H(OP_MUL_INT_2ADDR), \
580 H(OP_DIV_INT_2ADDR), \
581 H(OP_REM_INT_2ADDR), \
582 H(OP_AND_INT_2ADDR), \
583 H(OP_OR_INT_2ADDR), \
584 H(OP_XOR_INT_2ADDR), \
585 H(OP_SHL_INT_2ADDR), \
586 H(OP_SHR_INT_2ADDR), \
587 H(OP_USHR_INT_2ADDR), \
588 H(OP_ADD_LONG_2ADDR), \
589 H(OP_SUB_LONG_2ADDR), \
590 H(OP_MUL_LONG_2ADDR), \
591 H(OP_DIV_LONG_2ADDR), \
592 H(OP_REM_LONG_2ADDR), \
593 /* c0..cf */ \
594 H(OP_AND_LONG_2ADDR), \
595 H(OP_OR_LONG_2ADDR), \
596 H(OP_XOR_LONG_2ADDR), \
597 H(OP_SHL_LONG_2ADDR), \
598 H(OP_SHR_LONG_2ADDR), \
599 H(OP_USHR_LONG_2ADDR), \
600 H(OP_ADD_FLOAT_2ADDR), \
601 H(OP_SUB_FLOAT_2ADDR), \
602 H(OP_MUL_FLOAT_2ADDR), \
603 H(OP_DIV_FLOAT_2ADDR), \
604 H(OP_REM_FLOAT_2ADDR), \
605 H(OP_ADD_DOUBLE_2ADDR), \
606 H(OP_SUB_DOUBLE_2ADDR), \
607 H(OP_MUL_DOUBLE_2ADDR), \
608 H(OP_DIV_DOUBLE_2ADDR), \
609 H(OP_REM_DOUBLE_2ADDR), \
610 /* d0..df */ \
611 H(OP_ADD_INT_LIT16), \
612 H(OP_RSUB_INT), \
613 H(OP_MUL_INT_LIT16), \
614 H(OP_DIV_INT_LIT16), \
615 H(OP_REM_INT_LIT16), \
616 H(OP_AND_INT_LIT16), \
617 H(OP_OR_INT_LIT16), \
618 H(OP_XOR_INT_LIT16), \
619 H(OP_ADD_INT_LIT8), \
620 H(OP_RSUB_INT_LIT8), \
621 H(OP_MUL_INT_LIT8), \
622 H(OP_DIV_INT_LIT8), \
623 H(OP_REM_INT_LIT8), \
624 H(OP_AND_INT_LIT8), \
625 H(OP_OR_INT_LIT8), \
626 H(OP_XOR_INT_LIT8), \
627 /* e0..ef */ \
628 H(OP_SHL_INT_LIT8), \
629 H(OP_SHR_INT_LIT8), \
630 H(OP_USHR_INT_LIT8), \
631 H(OP_UNUSED_E3), \
632 H(OP_UNUSED_E4), \
633 H(OP_UNUSED_E5), \
634 H(OP_UNUSED_E6), \
635 H(OP_UNUSED_E7), \
Andy McFadden53878242010-03-05 07:24:27 -0800[diff] [blame^]636 H(OP_IGET_WIDE_VOLATILE), \
637 H(OP_IPUT_WIDE_VOLATILE), \
638 H(OP_SGET_WIDE_VOLATILE), \
639 H(OP_SPUT_WIDE_VOLATILE), \
Andy McFadden96516932009-10-28 17:39:02 -0700[diff] [blame]640 H(OP_BREAKPOINT), \
Andy McFadden3a1aedb2009-05-07 13:30:23 -0700[diff] [blame]641 H(OP_THROW_VERIFICATION_ERROR), \
The Android Open Source Projectf6c38712009-03-03 19:28:47 -0800[diff] [blame]642 H(OP_EXECUTE_INLINE), \
Andy McFaddenb0a05412009-11-19 10:23:41 -0800[diff] [blame]643 H(OP_EXECUTE_INLINE_RANGE), \
The Android Open Source Projectf6c38712009-03-03 19:28:47 -0800[diff] [blame]644 /* f0..ff */ \
645 H(OP_INVOKE_DIRECT_EMPTY), \
646 H(OP_UNUSED_F1), \
647 H(OP_IGET_QUICK), \
648 H(OP_IGET_WIDE_QUICK), \
649 H(OP_IGET_OBJECT_QUICK), \
650 H(OP_IPUT_QUICK), \
651 H(OP_IPUT_WIDE_QUICK), \
652 H(OP_IPUT_OBJECT_QUICK), \
653 H(OP_INVOKE_VIRTUAL_QUICK), \
654 H(OP_INVOKE_VIRTUAL_QUICK_RANGE), \
655 H(OP_INVOKE_SUPER_QUICK), \
656 H(OP_INVOKE_SUPER_QUICK_RANGE), \
657 H(OP_UNUSED_FC), \
658 H(OP_UNUSED_FD), \
659 H(OP_UNUSED_FE), \
660 H(OP_UNUSED_FF), \
661 };
662
663#endif /*_LIBDEX_OPCODE*/