diff --git a/src/accessories/audio.jd b/src/accessories/audio.jd
index 9202438..0b61b3f 100644
--- a/src/accessories/audio.jd
+++ b/src/accessories/audio.jd
@@ -74,3 +74,9 @@
 <p class="note"><strong>Note:</strong> The ADK 2012 source code includes an open source Bluetooth stack that
 is built for the Texas Instruments CC2564 chip, but can work with any Bluetooth chip that
 implements a standard Host/Controller Interface (HCI).</p>
+
+<h2 id="midi-over-usb">MIDI over USB and Bluetooth LE</h2>
+<p>Both USB and Bluetooth Low Energy can be used as transports for the
+<a href="http://en.wikipedia.org/wiki/MIDI">MIDI</a> protocol.
+See <a href="{@docRoot}devices/audio/midi.html">MIDI</a> for more information.
+</p>
diff --git a/src/accessories/headset-spec.jd b/src/accessories/headset-spec.jd
index c9a749e..572bb12 100644
--- a/src/accessories/headset-spec.jd
+++ b/src/accessories/headset-spec.jd
@@ -1,8 +1,8 @@
-page.title=Wired audio headset specification
+page.title=Wired audio headset specification (v1.1)
 @jd:body
 
 <!--
-    Copyright 2014 The Android Open Source Project
+    Copyright 2015 The Android Open Source Project
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
@@ -24,116 +24,68 @@
   </div>
 </div>
 
-<p><em>Version 1.1</em></p>
+<p>This section specifies requirements for headsets and mobile devices to
+function uniformly across the Android ecosystem.</p>
 
-<p>This document specifies the requirements for headsets and mobile devices to
-function uniformly across the Android ecosystem. It is separated into two
-sections beginning with the specifications for the headset
-accessory followed by the specifications for the mobile device.</p>
+<h2 id="headset_accessory_plug_specifications">Headset accessory (plug)
+specifications</h2>
 
-<h2 id=headset_accessory_plug_specifications>Headset Accessory (Plug) Specifications</h2>
+<p>The following requirements apply to headset accessories.</p>
 
-<p>The requirements in the following section apply to the headset accessory.</p>
+<h3 id="functions">Functions</h3>
 
-<h3 id=functions>Functions</h3>
+<table style="width:50%">
+ <tr>
+    <th>Function</th>
+    <th>Accessory Support</th>
+ </tr>
+ <tr>
+    <td>Stereo Audio Out</td>
+    <td>Required</td>
+ </tr>
+ <tr>
+    <td>Audio in (Mic)</td>
+    <td>Required</td>
+ </tr>
+ <tr>
+    <td>Ground</td>
+    <td>Required</td>
+ </tr>
+</table>
+
+<h3 id="control-function_mapping">Control-function mapping</h3>
 
 <table>
  <tr>
-    <th>
-<p><strong>Function</strong></p>
-</th>
-    <th>
-<p><strong>Accessory Support</strong></p>
-</th>
+    <th style="width:33%">Control Function</th>
+    <th style="width:33%">Accessory Support</th>
+    <th style="width:33%">Description</th>
  </tr>
  <tr>
-    <td>
-<p>Stereo Audio Out</p>
-</td>
-    <td>
-<p><strong>Required</strong></p>
-</td>
+    <td>Function A</td>
+    <td>Required</td>
+    <td>Play/pause/hook (Short Press), Trigger Assist (Long Press), Next
+    (Double Press)</td>
  </tr>
  <tr>
-    <td>
-<p>Audio in (Mic)</p>
-</td>
-    <td>
-<p><strong>Required</strong></p>
-</td>
+    <td>Function B</td>
+    <td>Optional</td>
+    <td>Vol+</td>
  </tr>
  <tr>
-    <td>
-<p>Ground</p>
-</td>
-    <td>
-<p><strong>Required</strong></p>
+    <td>Function C</td>
+    <td>Optional</td>
+    <td>Vol-</td>
+ </tr>
+ <tr>
+    <td>Function D</td>
+    <td>Optional</td>
+    <td>Reserved (Nexus devices use this to launch Google voice search)
 </td>
  </tr>
 </table>
 
-<h3 id=control-function_mapping>Control-Function Mapping</h3>
-
-<table>
- <tr>
-    <th>
-<p><strong>Control Function</strong></p>
-</th>
-    <th>
-<p><strong>Accessory Support</strong></p>
-</th>
-    <th>
-<p><strong>Description</strong></p>
-</th>
- </tr>
- <tr>
-    <td>
-<p>Function A</p>
-</td>
-    <td>
-<p><strong>Required</strong></p>
-</td>
-    <td>
-<p>Play/pause/hook (Short Press), Trigger Assist (Long Press), Next (double press)</p>
-</td>
- </tr>
- <tr>
-    <td>
-<p>Function B</p>
-</td>
-    <td>
-<p>Optional</p>
-</td>
-    <td>
-<p>Vol+</p>
-</td>
- </tr>
- <tr>
-    <td>
-<p>Function C</p>
-</td>
-    <td>
-<p>Optional</p>
-</td>
-    <td>
-<p>Vol-</p>
-</td>
- </tr>
- <tr>
-    <td>
-<p>Function D</p>
-</td>
-    <td>
-<p>Optional</p>
-</td>
-    <td>
-<p>Reserved (Nexus devices will use this reserved function to launch Google
-voice search)</p>
-</td>
- </tr>
-</table>
-
-<p><strong>Assign functions to buttons as follows</strong>:</p>
+<p>Assign functions to buttons as follows:</p>
 
 <ul>
   <li> All one-button headsets must implement Function A.
@@ -146,160 +98,93 @@
   </ul>
 </ul>
 
-<h3 id=mechanical>Mechanical</h3>
+<h3 id="mechanical">Mechanical</h3>
 
 <table>
  <tr>
-    <th>
-<p><strong>Function</strong></p>
-</th>
-    <th>
-<p><strong>Accessory Support</strong></p>
-</th>
-    <th>
-<p><strong>Notes</strong></p>
-</th>
+    <th style="width:33%">Function</th>
+    <th style="width:33%">Accessory Support</th>
+    <th style="width:33%">Notes</th>
  </tr>
  <tr>
-    <td>
-<p>4 conductor 3.5mm plug</p>
-</td>
-    <td>
-<p><strong>Required</strong></p>
-</td>
-    <td>
-<p>Ref: EIAJ-RC5325A standard</p>
-</td>
+    <td>4 conductor 3.5mm plug</td>
+    <td>Required</td>
+    <td>Ref: EIAJ-RC5325A standard</td>
  </tr>
  <tr>
-    <td>
-<p>CTIA pinout order (LRGM)</p>
-</td>
-    <td>
-<p><strong>Required</strong></p>
-</td>
-    <td>
-<p>Except in regions with legal requirements for OMTP pinout</p>
-</td>
+    <td>CTIA pinout order (LRGM)</td>
+    <td>Required</td>
+    <td>Except in regions with legal requirements for OMTP pinout</td>
  </tr>
  <tr>
-    <td>
-<p>OMTP pinout order  (LRMG)</p>
-</td>
-    <td>
-<p>Optional</p>
-</td>
+    <td>OMTP pinout order (LRMG)</td>
+    <td>Optional</td>
     <td></td>
  </tr>
  <tr>
-    <td>
-<p>Microphone</p>
-</td>
-    <td>
-<p><strong>Required</strong></p>
-</td>
-    <td>
-<p>Must not be obstructed when operating headset controls</p>
-</td>
+    <td>Microphone</td>
+    <td>Required</td>
+    <td>Must not be obstructed when operating headset controls</td>
  </tr>
 </table>
 
-<h3 id=electrical>Electrical</h3>
+<h3 id="electrical">Electrical</h3>
 
 <table>
  <tr>
-    <th>
-<p><strong>Function</strong></p>
-</th>
-    <th>
-<p><strong>Accessory Support</strong></p>
-</th>
-    <th>
-<p><strong>Description</strong></p>
-</th>
+    <th style="width:33%">Function</th>
+    <th style="width:33%">Accessory Support</th>
+    <th style="width:33%">Description</th>
  </tr>
  <tr>
-    <td>
-<p>Ear speaker impedance</p>
-</td>
-    <td>
-<p><strong>16 ohms or higher</strong></p>
-</td>
-    <td>
-<p>Recommend 32 - 300 ohms</p>
-</td>
+    <td>Ear speaker impedance</td>
+    <td>16 ohms or higher</td>
+    <td>Recommend 32 - 300 ohms</td>
  </tr>
  <tr>
-    <td>
-<p>Mic DC resistance</p>
+    <td>Mic DC resistance</td>
+    <td>1000 ohms or higher
 </td>
-    <td>
-<p><strong>1000 ohms or higher</strong></p>
-</td>
-    <td>
-<p>Mic characteristics must be compliant with section 5.4 “Audio Recording” of
-current Android Compatibility Definition Document (CDD)</p>
-</td>
+    <td>Mic characteristics must be compliant with section 5.4 “Audio
+    Recording” of the current
+    <a href="{@docRoot}compatibility/android-cdd.pdf">Android CDD</a></td>
  </tr>
  <tr>
-    <td>
-<p>Control Function Equivalent impedance*</p>
-
-<p>*Total impedance from positive mic terminal to GND when button is pressed with
-2.2 V mic bias applied through 2.2 kOhm resistor</p>
-</td>
-    <td>
-<p><strong>0 ohm</strong></p>
-</td>
-    <td>
-<p>[Function A]  Play/Pause/Hook</p>
-</td>
+    <td rowspan="4">Control Function Equivalent impedance*</td>
+    <td>0 ohm</td>
+    <td>[Function A] Play/Pause/Hook</td>
  </tr>
  <tr>
-    <td></td>
-    <td>
-<p><strong>240 ohm</strong> +/- 1% resistance</p>
-</td>
-    <td>
-<p>[Function B]</p>
-</td>
+    <td>240 ohm +/- 1% resistance</td>
+    <td>[Function B]</td>
  </tr>
  <tr>
-    <td></td>
-    <td>
-<p><strong>470 ohm</strong> +/- 1% resistance</p>
-</td>
-    <td>
-<p>[Function C] </p>
-</td>
+    <td>470 ohm +/- 1% resistance</td>
+    <td>[Function C]</td>
  </tr>
  <tr>
-    <td></td>
-    <td>
-<p><strong>135 ohm</strong> +/- 1% resistance</p>
-</td>
-    <td>
-<p>[Function D]</p>
-</td>
+    <td>135 ohm +/- 1% resistance</td>
+    <td>[Function D]</td>
  </tr>
 </table>
 
-<p>In the following diagrams, Button A is mapped to Function A, Button B to
+<p><em>*Total impedance from positive mic terminal to GND when button is
+pressed with 2.2 V mic bias applied through 2.2 kOhm resistor</em></p>
+
+<p>In the following diagrams, Button A maps to Function A, Button B to
 Function B, and so on.</p>
 
-<h3 id=reference_headset_test_circuit_1>Reference Headset Test Circuit 1</h3>
+<h3 id="reference_headsets">Reference headset test circuits</h3>
+
+<p>The following diagram for Reference Headset Test Circuit 1 shows the CTIA
+pinout for a 4-segment plug. For the OMTP pinout, switch the positions of the
+MIC and GND segments.</p>
 
 <img src="images/headset-circuit1.png" alt="Reference Headset Test Circuit 1" />
 <p class="img-caption"><strong>Figure 1.</strong> Reference headset test circuit 1</p>
 
-<p class="note"><strong>Note:</strong> The above diagram shows the CTIA pinout
-for a 4-segment plug. For the OMTP pinout, switch the positions of the MIC and
-GND segments.</p>
-
-<h3 id=reference_headset_test_circuit_2>Reference Headset Test Circuit 2</h3>
-
-<p>The second reference circuit shows how the actual resistor values (R1 - R4)
-are altered to meet this specification.</p>
+<p>The following diagram for Reference Headset Test Circuit 2 shows how the
+actual resistor values (R1 - R4) are altered to meet this specification.</p>
 
 <img src="images/headset-circuit2.png" alt="Reference Headset Test Circuit 2" />
 <p class="img-caption"><strong>Figure 2.</strong> Reference headset test circuit 2</p>
@@ -314,293 +199,161 @@
 equivalent impedance value of that button (provided), and Rmic is the
 microphone impedance value.</p>
 
-<p>The example above assumes a 5 kohm microphone impedance (Rmic). Therefore, to
-achieve an equivalent R4 impedance of 135 ohm (ReqD), the actual resistor value
-(R4) needs to be 139 ohms.</p>
+<p>The example above assumes a 5 kohm microphone impedance (Rmic); to achieve
+an equivalent R4 impedance of 135 ohm (ReqD), the actual resistor value (R4)
+must be 139 ohms.</p>
 
-
-<h2 id=mobile_device_jack_specifications>Mobile Device (Jack) Specifications</h2>
+<h2 id="mobile_device_jack_specifications">Mobile device (jack) specifications</h2>
 
 <p class="caution"><strong>Caution:</strong> To achieve compatibility with the
-headset specification above, devices that include a 4 conductor 3.5mm audio
-jack must meet the following specifications. Please see the <em>Analog audio
-ports</em> section of the <a
-href="{@docRoot}compatibility/android-cdd.pdf">Android Compatibility Definition
-Document (CDD)</a> for Android compatibility requirements.</p>
+headset specification, devices that include a 4 conductor 3.5mm audio jack
+must meet the following specifications. For Android compatibility requirements,
+refer to the <em>Analog audio ports</em> section of the <a
+href="{@docRoot}compatibility/android-cdd.pdf">Android CDD</a>.</p>
 
-<p><strong>Headset Jack Functions</strong></p>
+<h3 id="headset_jack_functions">Functions</h3>
+
 <table>
  <tr>
-    <th>
-<p><strong>Function</strong></p>
-</th>
-    <th>
-<p><strong>Device Support</strong></p>
-</th>
+    <th>Function</th>
+    <th>Device Support</th>
  </tr>
  <tr>
-    <td>
-<p>Stereo Audio Out</p>
-</td>
-    <td>
-<p><strong>Required</strong></p>
-</td>
+    <td>Stereo Audio Out</td>
+    <td>Required</td>
  </tr>
  <tr>
-    <td>
-<p>Audio in (Mic)</p>
-</td>
-    <td>
-<p><strong>Required</strong></p>
-</td>
+    <td>Audio in (Mic)</td>
+    <td>Required</td>
  </tr>
  <tr>
-    <td>
-<p>Ground</p>
-</td>
-    <td>
-<p><strong>Required</strong></p>
-</td>
+    <td>Ground</td>
+    <td>Required</td>
  </tr>
 </table>
 
-<h3 id=software_mapping>Software mapping</h3>
+<h3 id="software_mapping">Software mapping</h3>
 
 <table>
  <tr>
-    <th>
-<p><strong>Function</strong></p>
-</th>
-    <th>
-<p><strong>Device Support</strong></p>
-</th>
-    <th>
-<p><strong>Description</strong></p>
-</th>
+    <th style="width:33%">Function</th>
+    <th style="width:33%">Device Support</th>
+    <th style="width:33%">Description</th>
  </tr>
  <tr>
-    <td>
-<p>Function A control event </p>
-</td>
-    <td>
-<p><strong>Required</strong></p>
-</td>
-    <td>
-<p>input event KEY_MEDIA</p>
-
-<p>Android key  KEYCODE_HEADSETHOOK</p>
-</td>
+    <td>Function A control event</td>
+    <td>Required</td>
+    <td>input event KEY_MEDIA
+<p>Android key KEYCODE_HEADSETHOOK</p></td>
  </tr>
  <tr>
-    <td>
-<p>Function D control event</p>
-</td>
-    <td>
-<p><strong>Required</strong></p>
-</td>
-    <td>
-<p>input event KEY_VOICECOMMAND</p>
-
-<p>Android key KEYCODE_VOICE_ASSIST</p>
-</td>
+    <td>Function D control event</td>
+    <td>Required</td>
+    <td>input event KEY_VOICECOMMAND
+<p>Android key KEYCODE_VOICE_ASSIST</p></td>
  </tr>
  <tr>
-    <td>
-<p>Function B control event</p>
+    <td>Function B control event</td>
+    <td>Required
 </td>
-    <td>
-<p><strong>Required</strong></p>
-</td>
-    <td>
-<p>input event KEY_VOLUMEUP</p>
-
-<p>Android key  VOLUME_UP</p>
-</td>
+    <td>input event KEY_VOLUMEUP
+<p>Android key  VOLUME_UP</p></td>
  </tr>
  <tr>
-    <td>
-<p>Function C control event</p>
-</td>
-    <td>
-<p><strong>Required</strong></p>
-</td>
-    <td>
-<p>input event KEY_VOLUMEDOWN</p>
-
-<p>Android key  VOLUME_DOWN</p>
-</td>
+    <td>Function C control event</td>
+    <td>Required</td>
+    <td>input event KEY_VOLUMEDOWN
+<p>Android key VOLUME_DOWN</p></td>
  </tr>
  <tr>
-    <td>
-<p>Headset insertion detection</p>
-</td>
-    <td>
-<p><strong>Required</strong></p>
-</td>
-    <td>
-<p>input event SW_JACK_PHYSICAL_INSERT 7</p>
-</td>
+    <td>Headset insertion detection</td>
+    <td>Required</td>
+    <td>input event SW_JACK_PHYSICAL_INSERT 7</td>
  </tr>
  <tr>
-    <td>
-<p>Headset type detection</p>
-</td>
-    <td>
-<p><strong>Mic</strong></p>
-</td>
-    <td>
-<p>input event SW_MICROPHONE_INSERT 4</p>
-</td>
+    <td rowspan="2">Headset type detection</td>
+    <td>Mic</td>
+    <td>input event SW_MICROPHONE_INSERT 4</td>
  </tr>
  <tr>
-    <td>
-<p>Headset type detection</p>
-</td>
-    <td>
-<p><strong>No Mic</strong></p>
-</td>
-    <td>
-<p>input event SW_HEADPHONE_INSERT 2</p>
-</td>
+    <td>No Mic</td>
+    <td>input event SW_HEADPHONE_INSERT 2</td>
  </tr>
  <tr>
-    <td>
-<p>Headset speaker impedance</p>
-</td>
-    <td>
-<p><strong>Required Headphone (low)</strong></p>
-</td>
-    <td>
-<p>Failure mode is to indicate headphones so that limitation would be on</p>
-</td>
+    <td rowspan="2">Headset speaker impedance</td>
+    <td>Required Headphone (low)</td>
+    <td>Failure mode is to indicate headphones so limitation would be on</td>
  </tr>
  <tr>
-    <td>
-<p>Headset speaker impedance</p>
-</td>
-    <td>
-<p><strong>Required Line In (high)</strong></p>
-</td>
-    <td>
-<p>input event SW_LINEOUT_INSERT 6</p>
-</td>
+    <td>Required Line In (high)</td>
+    <td>input event SW_LINEOUT_INSERT 6</td>
  </tr>
 </table>
 
-<h3 id=mechanical11>Mechanical</h3>
+<h3 id="mechanical11">Mechanical</h3>
 
 <table>
  <tr>
-    <th>
-<p><strong>Function</strong></p>
-</th>
-    <th>
-<p><strong>Device Support</strong></p>
-</th>
-    <th>
-<p><strong>Description</strong></p>
-</th>
+    <th style="width:33%">Function</th>
+    <th style="width:33%">Device Support</th>
+    <th style="width:33%">Description</th>
  </tr>
  <tr>
-    <td>
-<p>4 conductor 3.5mm jack</p>
-</td>
-    <td>
-<p><strong>Required</strong></p>
-</td>
+    <td>4 conductor 3.5mm jack</td>
+    <td>Required</td>
     <td></td>
  </tr>
  <tr>
-    <td>
-<p>CTIA pinout order (LRGM)</p>
-</td>
-    <td>
-<p><strong>Required</strong></p>
-</td>
-    <td>
-<p>3 Pin & Mono Plug Compatible</p>
-</td>
+    <td>CTIA pinout order (LRGM)</td>
+    <td>Required</td>
+    <td>3 Pin & Mono Plug Compatible</td>
  </tr>
  <tr>
-    <td>
-<p>OMTP pinout order  (LRMG)</p>
-</td>
-    <td>
-<p>Optional but <strong>Strongly Recommended</strong></p>
-</td>
+    <td>OMTP pinout order (LRMG)</td>
+    <td>Optional but strongly recommended</td>
     <td></td>
  </tr>
  <tr>
-    <td>
-<p>Headset detect sequence</p>
-</td>
-    <td>
-<p><strong>Required</strong></p>
-</td>
-    <td>
-<p>Plug insert notification must only be triggered after all contacts on plug are
-touching their relevant segments. This will prevent unreliable headset
-detection due to slow insertion. </p>
-</td>
+    <td>Headset detect sequence</td>
+    <td>Required</td>
+    <td>Plug insert notification must be triggered only after all contacts on
+    plug are touching their relevant segments (this prevents unreliable headset
+    detection due to slow insertion.</td>
  </tr>
 </table>
 
-<h3 id=electrical12>Electrical</h3>
+<h3 id="electrical12">Electrical</h3>
 
-<h4 id=general>General</h4>
+<h4 id="general">General</h4>
 
 <table>
  <tr>
-    <th>
-<p><strong>Function</strong></p>
-</th>
-    <th>
-<p><strong>Device Support</strong></p>
-</th>
-    <th>
-<p><strong>Notes</strong></p>
-</th>
+    <th style="width:33%">Function</th>
+    <th style="width:33%">Device Support</th>
+    <th style="width:33%">Notes</th>
  </tr>
  <tr>
-    <td>
-<p>Maximum output voltage drive</p>
-</td>
-    <td>
-<p>150mV </p>
-</td>
-    <td>
-<p>&gt;= 150mV on 32 ohm</p>
-
-<p>Test conditions: EN50332-2</p>
-</td>
+    <td>Maximum output voltage drive</td>
+    <td>150mV</td>
+    <td>&gt;= 150mV on 32 ohm
+<p>Test conditions: EN50332-2</p></td>
  </tr>
  <tr>
-    <td>
-<p>Mic bias resistance </p>
-</td>
-    <td>
-<p>Required</p>
-</td>
-    <td>
-<p>Flexible on detection method used and microphone bias resistor selection.
-Require that all button resistance value ranges specified below be detected and
-related to their respective function</p>
-</td>
+    <td>Mic bias resistance</td>
+    <td>Required</td>
+    <td>Flexible on detection method used and microphone bias resistor
+    selection. Require that all button resistance value ranges specified below
+    be detected and related to their respective function</td>
  </tr>
  <tr>
-    <td>
-<p>Mic bias voltage</p>
-</td>
-    <td>
-<p>1.8V - 2.9V</p>
-</td>
-    <td>
-<p>To guarantee compatibility to common microphone capsules.</p>
-</td>
+    <td>Mic bias voltage</td>
+    <td>1.8V - 2.9V</td>
+    <td>To guarantee compatibility to common microphone capsules.</td>
  </tr>
 </table>
 
-<h4 id=function_impedance_and_threshold_detection>Function Impedance and Threshold Detection</h4>
+<h4 id="function_impedance_and_threshold_detection">Function impedance and
+threshold detection</h4>
 
 <p>Devices must detect the following resistor ladder on the accessories. The
 accessories will be tested to the standardized circuit diagram in the diagram
@@ -609,89 +362,49 @@
 bias applied through 2.2 kOhm resistor. This is the same effective resistance
 as the button detection circuit with the microphone in parallel with the button
 resistor.</p>
+
 <table>
  <tr>
-    <th>
-<p><strong>Button Impedance Level</strong></p>
-</th>
-    <th>
-<p><strong>Device Support</strong></p>
-</th>
-    <th>
-<p><strong>Notes</strong></p>
-</th>
+    <th style="width:40%">Button Impedance Level</th>
+    <th style="width:20%">Device Support</th>
+    <th style="width:40%">Notes</th>
  </tr>
  <tr>
-    <td>
-<p><strong>70 ohm or less</strong></p>
-</td>
-    <td>
-<p><strong>Required</strong></p>
-</td>
-    <td>
-<p>[Function A]</p>
-</td>
+    <td>70 ohm or less</td>
+    <td>Required</td>
+    <td>[Function A]</td>
  </tr>
  <tr>
-    <td>
-<p><strong>110 - 180 ohm </strong></p>
-</td>
-    <td>
-<p><strong>Required</strong></p>
-</td>
-    <td>
-<p>[Function D]</p>
-</td>
+    <td>110 - 180 ohm</td>
+    <td>Required</td>
+    <td>[Function D]</td>
  </tr>
  <tr>
-    <td>
-<p><strong>210 - 290 ohm</strong></p>
-</td>
-    <td>
-<p><strong>Required</strong></p>
-</td>
-    <td>
-<p>[Function B]</p>
-</td>
+    <td>210 - 290 ohm</td>
+    <td>Required</td>
+    <td>[Function B]</td>
  </tr>
  <tr>
-    <td>
-<p><strong>360 - 680 ohm </strong></p>
-</td>
-    <td>
-<p><strong>Required</strong></p>
-</td>
-    <td>
-<p>[Function C]</p>
-</td>
+    <td>360 - 680 ohm</td>
+    <td>Required</td>
+    <td>[Function C]</td>
+ </tr>
+ </table>
+
+ <table>
+ <tr>
+    <th style="width:40%">Headset Speaker Impedance Level</th>
+    <th style="width:20%">Device Support</th>
+    <th style="width:40%">Notes</th>
  </tr>
  <tr>
-    <td>
-<p><strong>Headset speaker impedance level</strong></p>
-</td>
-    <td></td>
-    <td></td>
+    <td>Low Threshold Detection</td>
+    <td>Required</td>
+    <td>Headphone (low) &lt; 1 Kohm</td>
  </tr>
  <tr>
-    <td>
-<p>Low Threshold Detection</p>
-</td>
-    <td>
-<p><strong>Required</strong></p>
-</td>
-    <td>
-<p>Headphone (low) &lt; 1 Kohm</p>
-</td>
+    <td>High Threshold Detection</td>
+    <td>Required</td>
+    <td>Line In (high) &gt; 5 Kohm</td>
  </tr>
- <tr>
-    <td>
-<p>High Threshold Detection</p>
-</td>
-    <td>
-<p><strong>Required</strong></p>
-</td>
-    <td>
-<p>Line In (high) &gt; 5 Kohm</p>
-</td>
- </tr>
-</table>
+</table>
\ No newline at end of file
diff --git a/src/accessories/images/headset-circuit1.png b/src/accessories/images/headset-circuit1.png
index f3e622a..d6f7421 100644
--- a/src/accessories/images/headset-circuit1.png
+++ b/src/accessories/images/headset-circuit1.png
Binary files differ
diff --git a/src/accessories/images/headset-circuit2.png b/src/accessories/images/headset-circuit2.png
index ff6b541..6700c45 100644
--- a/src/accessories/images/headset-circuit2.png
+++ b/src/accessories/images/headset-circuit2.png
Binary files differ
diff --git a/src/compatibility/5.1/android-5.1-cdd.html b/src/compatibility/5.1/android-5.1-cdd.html
new file mode 100644
index 0000000..9b9ff55
--- /dev/null
+++ b/src/compatibility/5.1/android-5.1-cdd.html
@@ -0,0 +1,4770 @@
+<!DOCTYPE html>
+<head>
+<title>Android 5.1 Compatibility Definition</title>
+<link rel="stylesheet" type="text/css" href="android-cdd.css"/>
+</head>
+
+<body>
+
+<h6>Table of Contents</h6>
+
+<div id="toc">
+
+<div id="toc_left">
+
+<p class="toc_h1"><a href="#1_introduction">1. Introduction</a></p>
+
+<p class="toc_h1"><a href="#2_device_types">2. Device Types</a></p>
+
+<p class="toc_h2"><a href="#2_1_device_configurations">2.1 Device Configurations</a></p>
+
+<p class="toc_h1"><a href="#3_software">3. Software</a></p>
+
+<p class="toc_h2"><a href="#3_1_managed_api_compatibility">3.1. Managed API Compatibility</a></p>
+
+<p class="toc_h2"><a href="#3_2_soft_api_compatibility">3.2. Soft API Compatibility</a></p>
+
+<p class="toc_h3"><a href="#3_2_1_permissions">3.2.1. Permissions</a></p>
+
+<p class="toc_h3"><a href="#3_2_2_build_parameters">3.2.2. Build Parameters</a></p>
+
+<p class="toc_h3"><a href="#3_2_3_intent_compatibility">3.2.3. Intent Compatibility</a></p>
+
+<p class="toc_h4"><a href="#3_2_3_1_core_application_intents">3.2.3.1. Core Application Intents</a></p>
+
+<p class="toc_h4"><a href="#3_2_3_2_intent_overrides">3.2.3.2. Intent Overrides</a></p>
+
+<p class="toc_h4"><a href="#3_2_3_3_intent_namespaces">3.2.3.3. Intent Namespaces</a></p>
+
+<p class="toc_h4"><a href="#3_2_3_4_broadcast_intents">3.2.3.4. Broadcast Intents</a></p>
+
+<p class="toc_h4"><a href="#3_2_3_5_default_app_settings">3.2.3.5. Default App Settings</a></p>
+
+<p class="toc_h2"><a href="#3_3_native_api_compatibility">3.3. Native API Compatibility</a></p>
+
+<p class="toc_h3"><a href="#3_3_1_application_binary_interfaces">3.3.1. Application Binary Interfaces</a></p>
+
+<p class="toc_h3"><a href="#3_3_2_32-bit_arm_native_code_compatibility">3.3.2. 32-bit ARM Native Code Compatibility</a></p>
+
+<p class="toc_h2"><a href="#3_4_web_compatibility">3.4. Web Compatibility</a></p>
+
+<p class="toc_h3"><a href="#3_4_1_webview_compatibility">3.4.1. WebView Compatibility</a></p>
+
+<p class="toc_h3"><a href="#3_4_2_browser_compatibility">3.4.2. Browser Compatibility</a></p>
+
+<p class="toc_h2"><a href="#3_5_api_behavioral_compatibility">3.5. API Behavioral Compatibility</a></p>
+
+<p class="toc_h2"><a href="#3_6_api_namespaces">3.6. API Namespaces</a></p>
+
+<p class="toc_h2"><a href="#3_7_runtime_compatibility">3.7. Runtime Compatibility</a></p>
+
+<p class="toc_h2"><a href="#3_8_user_interface_compatibility">3.8. User Interface Compatibility</a></p>
+
+<p class="toc_h3"><a href="#3_8_1_launcher_home_screen">3.8.1. Launcher (Home Screen)</a></p>
+
+<p class="toc_h3"><a href="#3_8_2_widgets">3.8.2. Widgets</a></p>
+
+<p class="toc_h3"><a href="#3_8_3_notifications">3.8.3. Notifications</a></p>
+
+<p class="toc_h3"><a href="#3_8_4_search">3.8.4. Search</a></p>
+
+<p class="toc_h3"><a href="#3_8_5_toasts">3.8.5. Toasts</a></p>
+
+<p class="toc_h3"><a href="#3_8_6_themes">3.8.6. Themes</a></p>
+
+<p class="toc_h3"><a href="#3_8_7_live_wallpapers">3.8.7. Live Wallpapers</a></p>
+
+<p class="toc_h3"><a href="#3_8_8_activity_switching">3.8.8. Activity Switching</a></p>
+
+<p class="toc_h3"><a href="#3_8_9_input_management">3.8.9. Input Management</a></p>
+
+<p class="toc_h3"><a href="#3_8_10_lock_screen_media_control">3.8.10. Lock Screen Media Control</a></p>
+
+<p class="toc_h3"><a href="#3_8_11_dreams">3.8.11. Dreams</a></p>
+
+<p class="toc_h3"><a href="#3_8_12_location">3.8.12. Location</a></p>
+
+<p class="toc_h3"><a href="#3_8_13_unicode_and_font">3.8.13. Unicode and Font</a></p>
+
+
+
+</div>
+
+<div id="toc_right"><br>
+
+
+
+<p class="toc_h2"><a href="#3_9_device_administration">3.9. Device Administration</a></p>
+
+<p class="toc_h2"><a href="#3_10_accessibility">3.10. Accessibility</a></p>
+
+<p class="toc_h2"><a href="#3_11_text-to-speech">3.11. Text-to-Speech</a></p>
+
+<p class="toc_h2"><a href="#3_12_tv_input_framework">3.12. TV Input Framework</a></p>
+
+<p class="toc_h1"><a href="#4_application_packaging_compatibility">4. Application Packaging Compatibility</a></p>
+
+<p class="toc_h1"><a href="#5_multimedia_compatibility">5. Multimedia Compatibility</a></p>
+
+<p class="toc_h2"><a href="#5_1_media_codecs">5.1. Media Codecs</a></p>
+
+<p class="toc_h3"><a href="#5_1_1_audio_codecs">5.1.1. Audio Codecs</a></p>
+
+<p class="toc_h3"><a href="#5_1_2_image_codecs">5.1.2. Image Codecs</a></p>
+
+<p class="toc_h3"><a href="#5_1_3_video_codecs">5.1.3. Video Codecs</a></p>
+
+<p class="toc_h2"><a href="#5_2_video_encoding">5.2. Video Encoding</a></p>
+
+<p class="toc_h2"><a href="#5_3_video_decoding">5.3. Video Decoding</a></p>
+
+<p class="toc_h2"><a href="#5_4_audio_recording">5.4. Audio Recording</a></p>
+
+<p class="toc_h3"><a href="#5_4_1_raw_audio_capture">5.4.1. Raw Audio Capture</a></p>
+
+<p class="toc_h3"><a href="#5_4_2_capture_for_voice_recognition">5.4.2. Capture for Voice Recognition</a></p>
+
+<p class="toc_h3"><a href="#5_4_3_capture_for_rerouting_of_playback">5.4.3. Capture for Rerouting of Playback</a></p>
+
+<p class="toc_h2"><a href="#5_5_audio_playback">5.5. Audio Playback</a></p>
+
+<p class="toc_h3"><a href="#5_5_1_raw_audio_playback">5.5.1. Raw Audio Playback</a></p>
+
+<p class="toc_h3"><a href="#5_5_2_audio_effects">5.5.2. Audio Effects</a></p>
+
+<p class="toc_h3"><a href="#5_5_3_audio_output_volume">5.5.3. Audio Output Volume</a></p>
+
+<p class="toc_h2"><a href="#5_6_audio_latency">5.6. Audio Latency</a></p>
+
+<p class="toc_h2"><a href="#5_7_network_protocols">5.7. Network Protocols</a></p>
+
+<p class="toc_h2"><a href="#5_8_secure_media">5.8. Secure Media</a></p>
+
+<p class="toc_h1"><a href="#6_developer_tools_and_options_compatibility">6. Developer Tools and Options Compatibility</a></p>
+
+<p class="toc_h2"><a href="#6_1_developer_tools">6.1. Developer Tools</a></p>
+
+<p class="toc_h2"><a href="#6_2_developer_options">6.2. Developer Options</a></p>
+
+<p class="toc_h1"><a href="#7_hardware_compatibility">7. Hardware Compatibility</a></p>
+
+<p class="toc_h2"><a href="#7_1_display_and_graphics">7.1. Display and Graphics</a></p>
+
+<p class="toc_h3"><a href="#7_1_1_screen_configuration">7.1.1. Screen Configuration</a></p>
+
+<p class="toc_h4"><a href="#7_1_1_1_screen_size">7.1.1.1. Screen Size</a></p>
+
+<p class="toc_h4"><a href="#7_1_1_2_screen_aspect_ratio">7.1.1.2. Screen Aspect Ratio</a></p>
+
+<p class="toc_h4"><a href="#7_1_1_3_screen_density">7.1.1.3. Screen Density</a></p>
+
+
+</div>
+
+<div style="clear: both; page-break-after:always; height:1px"></div>
+
+
+<div id="toc_left_2">
+
+<p class="toc_h3"><a href="#7_1_2_display_metrics">7.1.2. Display Metrics</a></p>
+
+<p class="toc_h3"><a href="#7_1_3_screen_orientation">7.1.3. Screen Orientation</a></p>
+
+<p class="toc_h3"><a href="#7_1_4_2d_and_3d_graphics_acceleration">7.1.4. 2D and 3D Graphics Acceleration</a></p>
+
+<p class="toc_h3"><a href="#7_1_5_legacy_application_compatibility_mode">7.1.5. Legacy Application Compatibility Mode</a></p>
+
+<p class="toc_h3"><a href="#7_1_6_screen_technology">7.1.6. Screen Technology</a></p>
+
+<p class="toc_h3"><a href="#7_1_7_external_displays">7.1.7. Secondary Displays</a></p>
+
+<p class="toc_h2"><a href="#7_2_input_devices">7.2. Input Devices</a></p>
+
+<p class="toc_h3"><a href="#7_2_1_keyboard">7.2.1. Keyboard</a></p>
+
+<p class="toc_h3"><a href="#7_2_2_non-touch_navigation">7.2.2. Non-touch Navigation</a></p>
+
+<p class="toc_h3"><a href="#7_2_3_navigation_keys">7.2.3. Navigation Keys</a></p>
+
+<p class="toc_h3"><a href="#7_2_4_touchscreen_input">7.2.4. Touchscreen Input</a></p>
+
+<p class="toc_h3"><a href="#7_2_5_fake_touch_input">7.2.5. Fake Touch Input</a></p>
+
+<p class="toc_h3"><a href="#7_2_6_game_controller_support">7.2.6. Game Controller Support</a></p>
+
+<p class="toc_h4"><a href="#7_2_6_1_button_mapping">7.2.6.1. Button Mappings</a></p>
+
+<p class="toc_h3"><a href="#7_2_7_remote_control">7.2.7. Remote Control</a></p>
+
+<p class="toc_h2"><a href="#7_3_sensors">7.3. Sensors</a></p>
+
+<p class="toc_h3"><a href="#7_3_1_accelerometer">7.3.1. Accelerometer</a></p>
+
+<p class="toc_h3"><a href="#7_3_2_magnetometer">7.3.2. Magnetometer</a></p>
+
+<p class="toc_h3"><a href="#7_3_3_gps">7.3.3. GPS</a></p>
+
+<p class="toc_h3"><a href="#7_3_4_gyroscope">7.3.4. Gyroscope</a></p>
+
+<p class="toc_h3"><a href="#7_3_5_barometer">7.3.5. Barometer</a></p>
+
+<p class="toc_h3"><a href="#7_3_6_thermometer">7.3.6. Thermometer</a></p>
+
+<p class="toc_h3"><a href="#7_3_7_photometer">7.3.7. Photometer</a></p>
+
+<p class="toc_h3"><a href="#7_3_8_proximity_sensor">7.3.8. Proximity Sensor</a></p>
+
+<p class="toc_h2"><a href="#7_4_data_connectivity">7.4. Data Connectivity</a></p>
+
+<p class="toc_h3"><a href="#7_4_1_telephony">7.4.1. Telephony</a></p>
+
+<p class="toc_h3"><a href="#7_4_2_ieee_80211_wi-fi">7.4.2. IEEE 802.11 (Wi-Fi)</a></p>
+
+<p class="toc_h4"><a href="#7_4_2_1_wi-fi_direct">7.4.2.1. Wi-Fi Direct</a></p>
+
+<p class="toc_h4"><a href="#7_4_2_2_wi-fi-tunneled-direct-link-setup">7.4.2.2. Wi-Fi Tunneled Direct Link Setup</a></p>
+
+<p class="toc_h3"><a href="#7_4_3_bluetooth">7.4.3. Bluetooth</a></p>
+
+<p class="toc_h3"><a href="#7_4_4_near-field_communications">7.4.4. Near-Field Communications</a></p>
+
+<p class="toc_h3"><a href="#7_4_5_minimum_network_capability">7.4.5. Minimum Network Capability</a></p>
+
+<p class="toc_h3"><a href="#7_4_6_sync_settings">7.4.6. Sync Settings</a></p>
+
+<p class="toc_h2"><a href="#7_5_cameras">7.5. Cameras</a></p>
+
+<p class="toc_h3"><a href="#7_5_1_rear-facing_camera">7.5.1. Rear-Facing Camera</a></p>
+
+<p class="toc_h3"><a href="#7_5_2_front-facing_camera">7.5.2. Front-Facing Camera</a></p>
+
+<p class="toc_h3"><a href="#7_5_3_external_camera">7.5.3. External Camera</a></p>
+
+<p class="toc_h3"><a href="#7_5_4_camera_api_behavior">7.5.4. Camera API Behavior</a></p>
+
+
+
+
+
+</div>
+
+<div id="toc_right_2">
+
+<p class="toc_h3"><a href="#7_5_5_camera_orientation">7.5.5. Camera Orientation</a></p>
+
+<p class="toc_h2"><a href="#7_6_memory_and_storage">7.6. Memory and Storage</a></p>
+
+<p class="toc_h3"><a href="#7_6_1_minimum_memory_and_storage">7.6.1. Minimum Memory and Storage</a></p>
+
+<p class="toc_h3"><a href="#7_6_2_application_shared_storage">7.6.2. Application Shared Storage</a></p>
+
+<p class="toc_h2"><a href="#7_7_usb">7.7. USB</a></p>
+
+<p class="toc_h2"><a href="#7_8_audio">7.8. Audio</a></p>
+
+<p class="toc_h3"><a href="#7_8_1_microphone">7.8.1. Microphone</a></p>
+
+<p class="toc_h3"><a href="#7_8_2_audio_output">7.8.2. Audio Output</a></p>
+
+<p class="toc_h4"><a href="#7_8_2_1_analog_audio_ports">7.8.2.1. Analog Audio Ports</a></p>
+
+<p class="toc_h1"><a href="#8_performance_compatibility">8. Performance Compatibility</a></p>
+
+<p class="toc_h2"><a href="#8_1_user_experience_consistency">8.1. User Experience Consistency</a></p>
+
+<p class="toc_h2"><a href="#8_2_memory_performance">8.2. Memory Performance</a></p>
+
+<p class="toc_h1"><a href="#9_security_model_compatibility">9. Security Model Compatibility</a></p>
+
+<p class="toc_h2"><a href="#9_1_permissions">9.1. Permissions</a></p>
+
+<p class="toc_h2"><a href="#9_2_uid_and_process_isolation">9.2. UID and Process Isolation</a></p>
+
+<p class="toc_h2"><a href="#9_3_filesystem_permissions">9.3. Filesystem Permissions</a></p>
+
+<p class="toc_h2"><a href="#9_4_alternate_execution_environments">9.4. Alternate Execution Environments</a></p>
+
+<p class="toc_h2"><a href="#9_5_multi-user_support">9.5. Multi-User Support</a></p>
+
+<p class="toc_h2"><a href="#9_6_premium_sms_warning">9.6. Premium SMS Warning</a></p>
+
+<p class="toc_h2"><a href="#9_7_kernel_security_features">9.7. Kernel Security Features</a></p>
+
+<p class="toc_h2"><a href="#9_8_privacy">9.8. Privacy</a></p>
+
+<p class="toc_h2"><a href="#9_9_full-disk-encryption">9.9. Full-Disk Encryption</a></p>
+
+<p class="toc_h2"><a href="#9_10_verified_boot">9.10. Verified Boot</a></p>
+
+<p class="toc_h1"><a href="#10_software_compatibility_testing">10. Software Compatibility Testing</a></p>
+
+<p class="toc_h2"><a href="#10_1_compatibility_test_suite">10.1. Compatibility Test Suite</a></p>
+
+<p class="toc_h2"><a href="#10_2_cts_verifier">10.2. CTS Verifier</a></p>
+
+<p class="toc_h1"><a href="#11_updatable_software">11. Updatable Software</a></p>
+
+<p class="toc_h1"><a href="#12_document_changelog">12. Document Changelog</a></p>
+
+<p class="toc_h1"><a href="#13_contact_us">13. Contact Us</a></p>
+
+<p class="toc_h1"><a href="#14_resources">14. Resources</a></p>
+
+</div>
+
+</div>
+
+<div style="clear: both"></div>
+
+<div id="main">
+
+<h1 id="1_introduction">1. Introduction</h1>
+
+
+<p>This document enumerates the requirements that must be met in order for devices
+to be compatible with Android 5.1.</p>
+
+<p>The use of &ldquo;MUST&rdquo;, &ldquo;MUST NOT&rdquo;, &ldquo;REQUIRED&rdquo;, &ldquo;SHALL&rdquo;, &ldquo;SHALL NOT&rdquo;, &ldquo;SHOULD&rdquo;,&ldquo;SHOULD NOT&rdquo;, &ldquo;RECOMMENDED&rdquo;, &ldquo;MAY&rdquo;, and &ldquo;OPTIONAL&rdquo; is per the IETF standard
+defined in RFC2119 [<a href="http://www.ietf.org/rfc/rfc2119.txt">Resources, 1</a>].</p>
+
+<p>As used in this document, a &ldquo;device implementer&rdquo; or &ldquo;implementer&rdquo; is a person
+or organization developing a hardware/software solution running Android 5.1. A
+&ldquo;device implementation&rdquo; or &ldquo;implementation is the hardware/software solution
+so developed.</p>
+
+<p>To be considered compatible with Android 5.1, device implementations MUST meet
+the requirements presented in this Compatibility Definition, including any
+documents incorporated via reference.</p>
+
+<p>Where this definition or the software tests described in <a href="#10_software_compatibility_testing">section 10</a> is silent, ambiguous, or incomplete, it is the responsibility of the device
+implementer to ensure compatibility with existing implementations.</p>
+
+<p>For this reason, the Android Open Source Project [<a href="http://source.android.com/">Resources, 2</a>] is both the reference and preferred implementation of Android. Device
+implementers are strongly encouraged to base their implementations to the
+greatest extent possible on the &ldquo;upstream&rdquo; source code available from the
+Android Open Source Project. While some components can hypothetically be
+replaced with alternate implementations this practice is strongly discouraged,
+as passing the software tests will become substantially more difficult. It is
+the implementer&rsquo;s responsibility to ensure full behavioral compatibility with
+the standard Android implementation, including and beyond the Compatibility
+Test Suite. Finally, note that certain component substitutions and
+modifications are explicitly forbidden by this document.</p>
+
+<p>Many of the resources listed in <a href="#14_resources">section 14</a> are derived directly or indirectly from the Android SDK, and will be
+functionally identical to the information in that SDK&rsquo;s documentation. For any
+case where this Compatibility Definition or the Compatibility Test Suite
+disagrees with the SDK documentation, the SDK documentation is considered
+authoritative. Any technical details provided in the references included in <a href="#14_resources">section 14</a> are considered by inclusion to be part of this Compatibility Definition. </p>
+
+<h1 id="2_device_types">2. Device Types</h1>
+
+
+<p>While the Android Open Source Project has been used in the implementation of a
+variety of device types and form factors, many aspects of the architecture and
+compatibility requirements were optimized for handheld devices. Starting from
+Android 5.0, the Android Open Source Project aims to embrace a wider variety of
+device types as described in this section.</p>
+
+<p><strong>Android Handheld device</strong> refers to an Android device implementation that is typically used by holding
+it in the hand, such as mp3 players, phones, and tablets. Android Handheld
+device implementations:</p>
+
+<ul>
+  <li>MUST have a touchscreen embedded in the device.</li>
+  <li>MUST have a power source that provides mobility, such as a battery.</li>
+</ul>
+
+<p><strong>Android Television device</strong> refers to an Android device implementation that is an entertainment interface
+for consuming digital media, movies, games, apps, and/or live TV for users
+sitting about ten feet away (a &ldquo;lean back&rdquo; or &ldquo;10-foot user interface&rdquo;).
+Android Television devices:</p>
+
+<ul>
+  <li>MUST have an embedded screen OR include a video output port, such as VGA, HDMI,
+or a wireless port for display.</li>
+  <li>MUST declare the features android.software.leanback and
+android.hardware.type.television [<a href="http://developer.android.com/reference/android/content/pm/PackageManager.html#FEATURE_LEANBACK">Resources, 3</a>].</li>
+</ul>
+
+<p><strong>Android Watch device</strong> refers to an Android device implementation intended to be worn on the body,
+perhaps on the wrist, and:</p>
+
+<ul>
+  <li>MUST have a screen with the physical diagonal length in the range from 1.1 to
+2.5 inches.</li>
+  <li>MUST declare the feature android.hardware.type.watch.</li>
+  <li>MUST support uiMode = UI_MODE_TYPE_WATCH [<a href="http://developer.android.com/reference/android/content/res/Configuration.html#UI_MODE_TYPE_WATCH">Resources, 4</a>].</li>
+</ul>
+
+<p><strong>Android Automotive implementation</strong> refers to a vehicle head
+unit running Android as an operating system for part or all of the system and/or
+infotainment functionality. Android Automotive implementations MUST support
+uiMode = UI_MODE_TYPE_CAR [<a href="http://developer.android.com/reference/android/content/res/Configuration.html#UI_MODE_TYPE_CAR">Resources, 111</a>].</p>
+
+<p>All Android device implementations that do not fit into any of the above device
+types still MUST meet all requirements in this document to be Android 5.1
+compatible, unless the requirement is explicitly described to be only
+applicable to a specific Android device type from above.</p>
+
+<h2 id="2_1_device_configurations">2.1 Device Configurations</h2>
+
+
+<p>This is a summary of major differences in hardware configuration by device
+type. (Empty cells denote a &ldquo;MAY&rdquo;). Not all configurations are covered in this
+table; see relevant hardware sections for more detail.</p>
+<table>
+ <tr>
+    <th>Category</th>
+    <th>Feature</th>
+    <th>Section</th>
+    <th>Handheld</th>
+    <th>Television</th>
+    <th>Watch</th>
+    <th>Automotive</th>
+    <th>Other</th>
+ </tr>
+ <tr>
+    <td rowspan="3">Input</td>
+    <td>D-pad</td>
+    <td><a href="#7_2_2_non-touch-navigation">7.2.2. Non-touch Navigation</a></td>
+    <td></td>
+    <td>MUST</td>
+    <td></td>
+    <td></td>
+    <td></td>
+ </tr>
+ <tr>
+    <td>Touchscreen </td>
+    <td><a href="#7_2_4_touchscreen_input">7.2.4. Touchscreen input</a></td>
+    <td>MUST</td>
+    <td></td>
+    <td>MUST</td>
+    <td></td>
+    <td>SHOULD</td>
+ </tr>
+ <tr>
+    <td>Microphone </td>
+    <td><a href="#7_8_1_microphone">7.8.1. Microphone</a></td>
+    <td>MUST</td>
+    <td>SHOULD </td>
+    <td>MUST</td>
+    <td>MUST</td>
+    <td>SHOULD</td>
+ </tr>
+ <tr>
+    <td rowspan="2">Sensors</td>
+    <td>Accelerometer </td>
+    <td><a href="#7_3_1_accelerometer">7.3.1 Accelerometer</a></td>
+    <td>SHOULD</td>
+    <td></td>
+    <td>SHOULD</td>
+    <td></td>
+    <td>SHOULD</td>
+ </tr>
+ <tr>
+    <td>GPS</td>
+    <td><a href="#7_3_3_gps">7.3.3. GPS</a></td>
+    <td>SHOULD</td>
+    <td></td>
+    <td></td>
+    <td>SHOULD</td>
+    <td></td>
+ </tr>
+ <tr>
+    <td rowspan="5">Connectivity</td>
+    <td>Wi-Fi</td>
+    <td><a href="#7_4_2_ieee_802.11">7.4.2. IEEE 802.11</a></td>
+    <td>SHOULD</td>
+    <td> MUST</td>
+    <td></td>
+    <td>SHOULD</td>
+    <td>SHOULD</td>
+ </tr>
+ <tr>
+    <td>Wi-Fi Direct</td>
+    <td><a href="#7_4_2_1_wi-fi-direct">7.4.2.1. Wi-Fi Direct</a></td>
+    <td>SHOULD</td>
+    <td>SHOULD</td>
+    <td></td>
+    <td></td>
+    <td>SHOULD</td>
+ </tr>
+ <tr>
+    <td>Bluetooth</td>
+    <td><a href="#7_4_3_bluetooth">7.4.3. Bluetooth</a></td>
+    <td>SHOULD</td>
+    <td>MUST</td>
+    <td>MUST</td>
+    <td>MUST</td>
+    <td>SHOULD</td>
+ </tr>
+ <tr>
+    <td>Bluetooth Low Energy</td>
+    <td><a href="#7_4_3_bluetooth">7.4.3. Bluetooth</a></td>
+    <td>SHOULD</td>
+    <td>MUST</td>
+    <td>SHOULD</td>
+    <td>SHOULD</td>
+    <td>SHOULD</td>
+ </tr>
+ <tr>
+    <td>USB peripheral/host mode</td>
+    <td><a href="#7_7_usb">7.7. USB</a></td>
+    <td>SHOULD</td>
+    <td></td>
+    <td></td>
+    <td>SHOULD</td>
+    <td>SHOULD</td>
+ </tr>
+ <tr>
+    <td>Output</td>
+    <td>Speaker and/or Audio output ports</td>
+    <td><a href="#7_8_2_audio_output">7.8.2. Audio Output</a></td>
+    <td>MUST</td>
+    <td>MUST</td>
+    <td></td>
+    <td>MUST</td>
+    <td>MUST</td>
+ </tr>
+</table>
+
+
+<h1 id="3_software">3. Software</h1>
+
+
+<h2 id="3_1_managed_api_compatibility">3.1. Managed API Compatibility</h2>
+
+
+<p>The managed Dalvik bytecode execution environment is the primary vehicle for
+Android applications. The Android application programming interface (API) is
+the set of Android platform interfaces exposed to applications running in the
+managed runtime environment. Device implementations MUST provide complete
+implementations, including all documented behaviors, of any documented API
+exposed by the Android SDK [<a href="http://developer.android.com/reference/packages.html">Resources, 5</a>] or any API decorated with the &ldquo;@SystemApi&rdquo; marker in the upstream Android
+source code. </p>
+
+<p>Device implementations MUST NOT omit any managed APIs, alter API interfaces or
+signatures, deviate from the documented behavior, or include no-ops, except
+where specifically allowed by this Compatibility Definition.</p>
+
+<p>This Compatibility Definition permits some types of hardware for which Android
+includes APIs to be omitted by device implementations. In such cases, the APIs
+MUST still be present and behave in a reasonable way. See <a href="#7_hardware_compatibility">section 7</a> for specific requirements for this scenario.</p>
+
+<h2 id="3_2_soft_api_compatibility">3.2. Soft API Compatibility</h2>
+
+
+<p>In addition to the managed APIs from <a href="#3_1_managed_api_compatibility">section 3.1</a>, Android also includes a significant runtime-only &ldquo;soft&rdquo; API, in the form of
+such things as intents, permissions, and similar aspects of Android
+applications that cannot be enforced at application compile time.</p>
+
+<h3 id="3_2_1_permissions">3.2.1. Permissions</h3>
+
+
+<p>Device implementers MUST support and enforce all permission constants as
+documented by the Permission reference page [<a href="http://developer.android.com/reference/android/Manifest.permission.html">Resources, 6]</a>. Note that <a href="#9_security_model_compatibility">section 9</a> lists additional requirements related to the Android security model.</p>
+
+<h3 id="3_2_2_build_parameters">3.2.2. Build Parameters</h3>
+
+
+<p>The Android APIs include a number of constants on the android.os.Build class [<a href="http://developer.android.com/reference/android/os/Build.html">Resources, 7</a>] that are intended to describe the current device. To provide consistent,
+meaningful values across device implementations, the table below includes
+additional restrictions on the formats of these values to which device
+implementations MUST conform.</p>
+<table>
+ <tr>
+    <th>Parameter</th>
+    <th>Details</th>
+ </tr>
+ <tr>
+    <td>VERSION.RELEASE</td>
+    <td>The version of the currently-executing Android system, in human-readable
+format. This field MUST have one of the string values defined in [<a href="http://source.android.com/compatibility/5.1/versions.html">Resources, 8]</a>.</td>
+ </tr>
+ <tr>
+    <td>VERSION.SDK</td>
+    <td>The version of the currently-executing Android system, in a format accessible
+to third-party application code. For Android 5.1, this field MUST have the
+integer value 22.</td>
+ </tr>
+ <tr>
+    <td>VERSION.SDK_INT</td>
+    <td>The version of the currently-executing Android system, in a format accessible
+to third-party application code. For Android 5.1, this field MUST have the
+integer value 22.</td>
+ </tr>
+ <tr>
+    <td>VERSION.INCREMENTAL</td>
+    <td>A value chosen by the device implementer designating the specific build of the
+currently-executing Android system, in human-readable format. This value MUST
+NOT be reused for different builds made available to end users. A typical use
+of this field is to indicate which build number or source-control change
+identifier was used to generate the build. There are no requirements on the
+specific format of this field, except that it MUST NOT be null or the empty
+string ("").</td>
+ </tr>
+ <tr>
+    <td>BOARD</td>
+    <td>A value chosen by the device implementer identifying the specific internal
+hardware used by the device, in human-readable format. A possible use of this
+field is to indicate the specific revision of the board powering the device.
+The value of this field MUST be encodable as 7-bit ASCII and match the regular
+expression &ldquo;^[a-zA-Z0-9_-]+$&rdquo;.</td>
+ </tr>
+ <tr>
+    <td>BRAND</td>
+    <td>A value reflecting the brand name associated with the device as known to the
+end users. MUST be in human-readable format and SHOULD represent the
+manufacturer of the device or the company brand under which the device is
+marketed. The value of this field MUST be encodable as 7-bit ASCII and match
+the regular expression &ldquo;^[a-zA-Z0-9_-]+$&rdquo;.</td>
+ </tr>
+ <tr>
+    <td>SUPPORTED_ABIS</td>
+    <td>The name of the instruction set (CPU type + ABI convention) of native code. See <a href="#3_3_native_api_compatibility">section 3.3. Native API Compatibility</a>.</td>
+ </tr>
+ <tr>
+    <td>SUPPORTED_32_BIT_ABIS</td>
+    <td>The name of the instruction set (CPU type + ABI convention) of native code. See <a href="#3_3_native_api_compatibility">section 3.3. Native API Compatibility</a>.</td>
+ </tr>
+ <tr>
+    <td>SUPPORTED_64_BIT_ABIS</td>
+    <td>The name of the second instruction set (CPU type + ABI convention) of native
+code. See <a href="#3_3_native_api_compatibility">section 3.3. Native API Compatibility</a>.</td>
+ </tr>
+ <tr>
+    <td>CPU_ABI</td>
+    <td>The name of the instruction set (CPU type + ABI convention) of native code. See <a href="#3_3_native_api_compatibility">section 3.3. Native API Compatibility</a>.</td>
+ </tr>
+ <tr>
+    <td>CPU_ABI2</td>
+    <td>The name of the second instruction set (CPU type + ABI convention) of native
+code. See <a href="#3_3_native_api_compatibility">section 3.3. Native API Compatibility</a>.</td>
+ </tr>
+ <tr>
+    <td>DEVICE</td>
+    <td>A value chosen by the device implementer containing the development name or
+code name identifying the configuration of the hardware features and industrial
+design of the device. The value of this field MUST be encodable as 7-bit ASCII
+and match the regular expression &ldquo;^[a-zA-Z0-9_-]+$&rdquo;.</td>
+ </tr>
+ <tr>
+    <td>FINGERPRINT</td>
+    <td>A string that uniquely identifies this build. It SHOULD be reasonably
+human-readable. It MUST follow this template:</p>
+
+<p class="small">$(BRAND)/$(PRODUCT)/$(DEVICE):$(VERSION.RELEASE)/$(ID)/$(VERSION.INCREMENTAL):$(TYPE)/$(TAGS)</p>
+
+<p>For example: acme/myproduct/mydevice:5.1/LMYXX/3359:userdebug/test-keys</p>
+
+<p>The fingerprint MUST NOT include whitespace characters. If other fields
+included in the template above have whitespace characters, they MUST be
+replaced in the build fingerprint with another character, such as the
+underscore ("_") character. The value of this field MUST be encodable as 7-bit
+ASCII.</td>
+ </tr>
+ <tr>
+    <td>HARDWARE</td>
+    <td>The name of the hardware (from the kernel command line or /proc). It SHOULD be
+reasonably human-readable. The value of this field MUST be encodable as 7-bit
+ASCII and match the regular expression &ldquo;^[a-zA-Z0-9_-]+$&rdquo;. </td>
+ </tr>
+ <tr>
+    <td>HOST</td>
+    <td>A string that uniquely identifies the host the build was built on, in
+human-readable format. There are no requirements on the specific format of this
+field, except that it MUST NOT be null or the empty string ("").</td>
+ </tr>
+ <tr>
+    <td>ID</td>
+    <td>An identifier chosen by the device implementer to refer to a specific release,
+in human-readable format. This field can be the same as
+android.os.Build.VERSION.INCREMENTAL, but SHOULD be a value sufficiently
+meaningful for end users to distinguish between software builds. The value of
+this field MUST be encodable as 7-bit ASCII and match the regular expression &ldquo;^[a-zA-Z0-9._-]+$&rdquo;.</td>
+ </tr>
+ <tr>
+    <td>MANUFACTURER</td>
+    <td>The trade name of the Original Equipment Manufacturer (OEM) of the product.
+There are no requirements on the specific format of this field, except that it
+MUST NOT be null or the empty string ("").</td>
+ </tr>
+ <tr>
+    <td>MODEL</td>
+    <td>A value chosen by the device implementer containing the name of the device as
+known to the end user. This SHOULD be the same name under which the device is
+marketed and sold to end users. There are no requirements on the specific
+format of this field, except that it MUST NOT be null or the empty string ("").</td>
+ </tr>
+ <tr>
+    <td>PRODUCT</td>
+    <td>A value chosen by the device implementer containing the development name or
+code name of the specific product (SKU) that MUST be unique within the same
+brand. MUST be human-readable, but is not necessarily intended for view by end
+users. The value of this field MUST be encodable as 7-bit ASCII and match the
+regular expression &ldquo;^[a-zA-Z0-9_-]+$&rdquo;.</td>
+ </tr>
+ <tr>
+    <td>SERIAL</td>
+    <td>A hardware serial number, which MUST be available. The value of this field MUST
+be encodable as 7-bit ASCII and match the regular expression &ldquo;^([a-zA-Z0-9]{6,20})$&rdquo;.</td>
+ </tr>
+ <tr>
+    <td>TAGS</td>
+    <td>A comma-separated list of tags chosen by the device implementer that further
+distinguishes the build. This field MUST have one of the values corresponding
+to the three typical Android platform signing configurations: release-keys,
+dev-keys, test-keys. </td>
+ </tr>
+ <tr>
+    <td>TIME</td>
+    <td>A value representing the timestamp of when the build occurred.</td>
+ </tr>
+ <tr>
+    <td>TYPE</td>
+    <td>A value chosen by the device implementer specifying the runtime configuration
+of the build. This field MUST have one of the values corresponding to the three
+typical Android runtime configurations: user, userdebug, or eng.</td>
+ </tr>
+ <tr>
+    <td>USER</td>
+    <td>A name or user ID of the user (or automated user) that generated the build.
+There are no requirements on the specific format of this field, except that it
+MUST NOT be null or the empty string ("").</td>
+ </tr>
+</table>
+
+
+<h3 id="3_2_3_intent_compatibility">3.2.3. Intent Compatibility</h3>
+
+
+<p>Device implementations MUST honor Android&rsquo;s loose-coupling intent system, as
+described in the sections below. By&ldquo;honored &rdquo; it is meant that the device
+implementer MUST provide an Android Activity or Service that specifies a
+matching intent filter that binds to and implements correct behavior for each
+specified intent pattern.</p>
+
+<h4 id="3_2_3_1_core_application_intents">3.2.3.1. Core Application Intents</h4>
+
+
+<p>Android intents allow application components to request functionality from
+other Android components. The Android upstream project includes a list of
+applications considered core Android applications, which implements several
+intent patterns to perform common actions. The core Android applications are:</p>
+
+<ul>
+  <li>Desk Clock</li>
+  <li>Browser</li>
+  <li>Calendar</li>
+  <li>Contacts</li>
+  <li>Gallery</li>
+  <li>GlobalSearch</li>
+  <li>Launcher</li>
+  <li>Music</li>
+  <li>Settings</li>
+</ul>
+
+<p>Device implementations SHOULD include the core Android applications as
+appropriate but MUST include a component implementing the same intent patterns
+defined by all the &ldquo;public&rdquo; Activity or Service components of these core
+Android applications. Note that Activity or Service components are considered
+&ldquo;public&rdquo; when the attribute android:exported is absent or has the value true.</p>
+
+<h4 id="3_2_3_2_intent_overrides">3.2.3.2. Intent Overrides</h4>
+
+
+<p>As Android is an extensible platform, device implementations MUST allow each
+intent pattern referenced in <a href="#3_2_3_1_core_application_intents">section 3.2.3.1</a> to be overridden by third-party applications. The upstream Android open source
+implementation allows this by default; device implementers MUST NOT attach
+special privileges to system applications' use of these intent patterns, or
+prevent third-party applications from binding to and assuming control of these
+patterns. This prohibition specifically includes but is not limited to
+disabling the&ldquo;Chooser&rdquo; user interface that allows the user to select between
+multiple applications that all handle the same intent pattern.</p>
+
+<p>However, device implementations MAY provide default activities for specific URI
+patterns (eg. http://play.google.com) if the default activity provides a more
+specific filter for the data URI. For example, an intent filter specifying the
+data URI &ldquo;http://www.android.com&rdquo; is more specific than the browser filter for&ldquo;http://&rdquo;. Device implementations MUST provide a user interface for users to
+modify the default activity for intents.</p>
+
+<h4 id="3_2_3_3_intent_namespaces">3.2.3.3. Intent Namespaces</h4>
+
+
+<p>Device implementations MUST NOT include any Android component that honors any
+new intent or broadcast intent patterns using an ACTION, CATEGORY, or other key
+string in the android.* or com.android.* namespace. Device implementers MUST
+NOT include any Android components that honor any new intent or broadcast
+intent patterns using an ACTION, CATEGORY, or other key string in a package
+space belonging to another organization. Device implementers MUST NOT alter or
+extend any of the intent patterns used by the core apps listed in <a href="#3_2_3_1_core_application_intents">section 3.2.3.1</a>. Device implementations MAY include intent patterns using namespaces clearly
+and obviously associated with their own organization. This prohibition is
+analogous to that specified for Java language classes in <a href="#3_6_api_namespaces">section 3.6</a>.</p>
+
+<h4 id="3_2_3_4_broadcast_intents">3.2.3.4. Broadcast Intents</h4>
+
+
+<p>Third-party applications rely on the platform to broadcast certain intents to
+notify them of changes in the hardware or software environment.
+Android-compatible devices MUST broadcast the public broadcast intents in
+response to appropriate system events. Broadcast intents are described in the
+SDK documentation.</p>
+
+<h4 id="3_2_3_5_default_app_settings">3.2.3.5. Default App Settings</h4>
+
+
+<p>Android includes settings that provide users an easy way to select their
+default applications, for example for Home screen or SMS. Where it makes sense,
+device implementations MUST provide a similar settings menu and be compatible
+with the intent filter pattern and API methods described in the SDK
+documentation as below.</p>
+
+<p>Device implementations:</p>
+
+<ul>
+  <li>MUST honor the android.settings.HOME_SETTINGS intent to show a default app
+settings menu for Home Screen, if the device implementation reports
+android.software.home_screen [<a href="http://developer.android.com/reference/android/provider/Settings.html">Resources, 10]</a></li>
+  <li>MUST provide a settings menu that will call the
+android.provider.Telephony.ACTION_CHANGE_DEFAULT intent to show a dialog to
+change the default SMS application, if the device implementation reports
+android.hardware.telephony [<a href="http://developer.android.com/reference/android/provider/Telephony.Sms.Intents.html">Resources, 9</a>]</li>
+  <li>MUST honor the android.settings.NFC_PAYMENT_SETTINGS intent to show a default
+app settings menu for Tap and Pay, if the device implementation reports
+android.hardware.nfc.hce [<a href="http://developer.android.com/reference/android/provider/Settings.html">Resources, 10]</a></li>
+</ul>
+
+<h2 id="3_3_native_api_compatibility">3.3. Native API Compatibility</h2>
+
+
+<h3 id="3_3_1_application_binary_interfaces">3.3.1. Application Binary Interfaces</h3>
+
+
+<p>Managed Dalvik bytecode can call into native code provided in the application
+.apk file as an ELF .so file compiled for the appropriate device hardware
+architecture. As native code is highly dependent on the underlying processor
+technology, Android defines a number of Application Binary Interfaces (ABIs) in
+the Android NDK. Device implementations MUST be compatible with one or more
+defined ABIs, and MUST implement compatibility with the Android NDK, as below.</p>
+
+<p>If a device implementation includes support for an Android ABI, it:</p>
+
+<ul>
+  <li>MUST include support for code running in the managed environment to call into
+native code, using the standard Java Native Interface (JNI) semantics</li>
+  <li>MUST be source-compatible (i.e. header compatible) and binary-compatible (for
+the ABI) with each required library in the list below</li>
+  <li>MUST support the equivalent 32-bit ABI if any 64-bit ABI is supported</li>
+  <li>MUST accurately report the native Application Binary Interface (ABI) supported
+by the device, via the android.os.Build.SUPPORTED_ABIS,
+android.os.Build.SUPPORTED_32_BIT_ABIS, and
+android.os.Build.SUPPORTED_64_BIT_ABIS parameters, each a comma separated list
+of ABIs ordered from the most to the least preferred one</li>
+  <li>MUST report, via the above parameters, only those ABIs documented in the latest
+version of the Android NDK, &ldquo;NDK Programmer&rsquo;s Guide | ABI Management&rdquo; in docs/
+directory</li>
+  <li>SHOULD be built using the source code and header files available in the
+upstream Android Open Source Project</li>
+</ul>
+
+<p>The following native code APIs MUST be available to apps that include native
+code:</p>
+
+<ul>
+  <li>libc (C library)</li>
+  <li>libm (math library)</li>
+  <li>Minimal support for C++</li>
+  <li>JNI interface</li>
+  <li>liblog (Android logging)</li>
+  <li>libz (Zlib compression)</li>
+  <li>libdl (dynamic linker)</li>
+  <li>libGLESv1_CM.so (OpenGL ES 1.x)</li>
+  <li>libGLESv2.so (OpenGL ES 2.0)</li>
+  <li>libGLESv3.so (OpenGL ES 3.x)</li>
+  <li>libEGL.so (native OpenGL surface management)</li>
+  <li>libjnigraphics.so</li>
+  <li>libOpenSLES.so (OpenSL ES 1.0.1 audio support)</li>
+  <li>libOpenMAXAL.so (OpenMAX AL 1.0.1 support)</li>
+  <li>libandroid.so (native Android activity support)</li>
+  <li>libmediandk.so (native media APIs support)</li>
+  <li>Support for OpenGL, as described below</li>
+</ul>
+
+<p>Note that future releases of the Android NDK may introduce support for
+additional ABIs. If a device implementation is not compatible with an existing
+predefined ABI, it MUST NOT report support for any ABIs at all.</p>
+
+<p>Note that device implementations MUST include libGLESv3.so and it MUST symlink
+(symbolic link) to libGLESv2.so. in turn, MUST export all the OpenGL ES 3.1 and
+Android Extension Pack [<a href="http://developer.android.com/guide/topics/graphics/opengl.html#aep">Resources, 11</a>] function symbols as defined in the NDK release android-21. Although all the
+symbols must be present, only the corresponding functions for OpenGL ES
+versions and extensions actually supported by the device must be fully
+implemented.</p>
+
+<p>Native code compatibility is challenging. For this reason, device implementers
+are <strong>very strongly encouraged</strong> to use the implementations of the libraries listed above from the upstream
+Android Open Source Project. </p>
+
+<h3 id="3_3_2_32-bit_arm_native_code_compatibility">
+3.3.2. 32-bit ARM Native Code Compatibility
+</h3>
+
+<p>The ARMv8 architecture deprecates several CPU operations, including some
+operations used in existing native code.  On 64-bit ARM devices, the following
+deprecated operations MUST remain available to 32-bit native ARM code, either
+through native CPU support or through software emulation:</p>
+
+<ul>
+<li>SWP and SWPB instructions</li>
+<li>SETEND instruction</li>
+<li>CP15ISB, CP15DSB, and CP15DMB barrier operations</li>
+</ul>
+
+<p>Legacy versions of the Android NDK used /proc/cpuinfo to discover CPU features
+from 32-bit ARM native code. For compatibility with applications built using this
+NDK, devices MUST include the following lines in /proc/cpuinfo when it is read
+by 32-bit ARM applications:</p>
+
+<ul>
+<li>&quot;Features: &quot;, followed by a list of any optional ARMv7 CPU features
+supported by the device</li>
+<li>&quot;CPU architecture: &quot;, followed by an integer describing the device's
+highest supported ARM architecture (e.g., &quot;8&quot; for ARMv8 devices)</li>
+</ul>
+
+<p>These requirements only apply when /proc/cpuinfo is read by 32-bit ARM
+applications. Devices SHOULD not alter /proc/cpuinfo when read by 64-bit ARM or
+non-ARM applications.</p>
+
+<h2 id="3_4_web_compatibility">3.4. Web Compatibility</h2>
+
+
+<h3 id="3_4_1_webview_compatibility">3.4.1. WebView Compatibility</h3>
+
+<div class="note">
+<p>Android Watch devices MAY, but all other device implementations MUST provide
+a complete implementation of the android.webkit.Webview API.</p>
+</div>
+
+
+<p>The platform feature android.software.webview MUST be reported on any device
+that provides a complete implementation of the android.webkit.WebView API, and
+MUST NOT be reported on devices without a complete implementation of the API.
+The Android Open Source implementation uses code from the Chromium Project to
+implement the android.webkit.WebView [<a href="http://developer.android.com/reference/android/webkit/WebView.html">Resources, 12</a>]. Because it is not feasible to develop a comprehensive test suite for a web
+rendering system, device implementers MUST use the specific upstream build of
+Chromium in the WebView implementation. Specifically:</p>
+
+<ul>
+  <li>Device android.webkit.WebView implementations MUST be based on the Chromium
+build from the upstream Android Open Source Project for Android 5.1. This build
+includes a specific set of functionality and security fixes for the WebView [<a href="http://www.chromium.org/">Resources, 13</a>].</li>
+  <li>The user agent string reported by the WebView MUST be in this format:
+<p>Mozilla/5.1 (Linux; Android $(VERSION); $(MODEL) Build/$(BUILD)$(WEBVIEW))
+AppleWebKit/537.36 (KHTML, like Gecko) Version/4.0 $(CHROMIUM_VER) Mobile
+Safari/537.36</p>
+  <ul>
+    <li>The value of the $(VERSION) string MUST be the same as the value for
+android.os.Build.VERSION.RELEASE.</li>
+    <li>The $(WEBVIEW) string MAY be omitted, but if included MUST be "; wv" to
+        note that this is a webview</li>
+    <li>The value of the $(MODEL) string MUST be the same as the value for
+android.os.Build.MODEL.</li>
+    <li>The value of the $(BUILD) string MUST be the same as the value for
+android.os.Build.ID.</li>
+    <li>The value of the $(CHROMIUM_VER) string MUST be the version of Chromium in the
+upstream Android Open Source Project.</li>
+    <li>Device implementations MAY omit Mobile in the user agent string.</li>
+  </ul></li></ul>
+
+<p>The WebView component SHOULD include support for as many HTML5 features as
+possible and if it supports the feature SHOULD conform to the HTML5
+specification [<a href="http://html.spec.whatwg.org/multipage/">Resources, 14</a>].</p>
+
+<h3 id="3_4_2_browser_compatibility">3.4.2. Browser Compatibility</h3>
+
+<div class="note">
+<p>Android Television, Watch, and Android Automotive implementations MAY omit a
+browser application, but MUST support the public intent patterns as described in
+<a href="#3_2_3_1_core_application_intents">section 3.2.3.1</a>. All other types
+of device implementations MUST include a standalone Browser application for
+general user web browsing.</p>
+</div>
+
+<p>The standalone Browser MAY be based on a browser technology other than WebKit.
+However, even if an alternate Browser application is used, the
+android.webkit.WebView component provided to third-party applications MUST be
+based on WebKit, as described in <a href="#3_4_1_webview_compatibility">section 3.4.1</a>.</p>
+
+<p>Implementations MAY ship a custom user agent string in the standalone Browser
+application.</p>
+
+<p>The standalone Browser application (whether based on the upstream WebKit
+Browser application or a third-party replacement) SHOULD include support for as
+much of HTML5 [<a href="http://html.spec.whatwg.org/multipage/">Resources, 14</a>] as possible. Minimally, device implementations MUST support each of these
+APIs associated with HTML5:</p>
+
+<ul>
+  <li>application cache/offline operation [<a href="http://www.w3.org/html/wg/drafts/html/master/browsers.html#offline">Resources, 15</a>]</li>
+  <li>the &#60;video&#62; tag [<a href="http://www.w3.org/html/wg/drafts/html/master/semantics.html#video">Resources, 16</a>]</li>
+  <li>geolocation [<a href="http://www.w3.org/TR/geolocation-API/">Resources, 17</a>]</li>
+</ul>
+
+<p>Additionally, device implementations MUST support the HTML5/W3C webstorage API
+[<a href="http://www.w3.org/TR/webstorage/">Resources, 18</a>], and SHOULD support the HTML5/W3C IndexedDB API [<a href="http://www.w3.org/TR/IndexedDB/">Resources, 19</a>]. Note that as the web development standards bodies are transitioning to favor
+IndexedDB over webstorage, IndexedDB is expected to become a required component
+in a future version of Android.</p>
+
+<h2 id="3_5_api_behavioral_compatibility">3.5. API Behavioral Compatibility</h2>
+
+
+<p>The behaviors of each of the API types (managed, soft, native, and web) must be
+consistent with the preferred implementation of the upstream Android Open
+Source Project [<a href="http://source.android.com/">Resources, 2</a>]. Some specific areas of compatibility are:</p>
+
+<ul>
+  <li>Devices MUST NOT change the behavior or semantics of a standard intent.</li>
+  <li>Devices MUST NOT alter the lifecycle or lifecycle semantics of a particular
+type of system component (such as Service, Activity, ContentProvider, etc.).</li>
+  <li>Devices MUST NOT change the semantics of a standard permission.</li>
+</ul>
+
+<p>The above list is not comprehensive. The Compatibility Test Suite (CTS) tests
+significant portions of the platform for behavioral compatibility, but not all.
+It is the responsibility of the implementer to ensure behavioral compatibility
+with the Android Open Source Project. For this reason, device implementers
+SHOULD use the source code available via the Android Open Source Project where
+possible, rather than re-implement significant parts of the system.</p>
+
+<h2 id="3_6_api_namespaces">3.6. API Namespaces</h2>
+
+
+<p>Android follows the package and class namespace conventions defined by the Java
+programming language. To ensure compatibility with third-party applications,
+device implementers MUST NOT make any prohibited modifications (see below) to
+these package namespaces:</p>
+
+<ul>
+  <li>java.*</li>
+  <li>javax.*</li>
+  <li>sun.*</li>
+  <li>android.*</li>
+  <li>com.android.*</li>
+</ul>
+
+<p><strong>Prohibited modifications include</strong>:</p>
+
+<ul>
+  <li>Device implementations MUST NOT modify the publicly exposed APIs on the Android
+platform by changing any method or class signatures, or by removing classes or
+class fields.</li>
+  <li>Device implementers MAY modify the underlying implementation of the APIs, but
+such modifications MUST NOT impact the stated behavior and Java-language
+signature of any publicly exposed APIs.</li>
+  <li>Device implementers MUST NOT add any publicly exposed elements (such as classes
+or interfaces, or fields or methods to existing classes or interfaces) to the
+APIs above.</li>
+</ul>
+
+<p>A &ldquo;publicly exposed element&rdquo; is any construct which is not decorated with the&ldquo;@hide&rdquo; marker as used in the upstream Android source code. In other words,
+device implementers MUST NOT expose new APIs or alter existing APIs in the
+namespaces noted above. Device implementers MAY make internal-only
+modifications, but those modifications MUST NOT be advertised or otherwise
+exposed to developers.</p>
+
+<p>Device implementers MAY add custom APIs, but any such APIs MUST NOT be in a
+namespace owned by or referring to another organization. For instance, device
+implementers MUST NOT add APIs to the com.google.* or similar namespace: only
+Google may do so. Similarly, Google MUST NOT add APIs to other companies'
+namespaces. Additionally, if a device implementation includes custom APIs
+outside the standard Android namespace, those APIs MUST be packaged in an
+Android shared library so that only apps that explicitly use them (via the
+<uses-library> mechanism) are affected by the increased memory usage of such
+APIs.</p>
+
+<p>If a device implementer proposes to improve one of the package namespaces above
+(such as by adding useful new functionality to an existing API, or adding a new
+API), the implementer SHOULD visit <a href="http://source.android.com/">source.android.com</a> and begin the process for contributing changes and code, according to the
+information on that site.</p>
+
+<p>Note that the restrictions above correspond to standard conventions for naming
+APIs in the Java programming language; this section simply aims to reinforce
+those conventions and make them binding through inclusion in this Compatibility
+Definition.</p>
+
+<h2 id="3_7_runtime_compatibility">3.7. Runtime Compatibility</h2>
+
+
+<p>Device implementations MUST support the full Dalvik Executable (DEX) format and
+Dalvik bytecode specification and semantics [<a href="https://android.googlesource.com/platform/dalvik/+/lollipop-release/docs/">Resources, 20</a>]. Device implementers SHOULD use ART, the reference upstream implementation of
+the Dalvik Executable Format, and the reference implementation&rsquo;s package
+management system.</p>
+
+<p>Device implementations MUST configure Dalvik runtimes to allocate memory in
+accordance with the upstream Android platform, and as specified by the
+following table. (See <a href="#7_1_1_screen_configuration">section 7.1.1</a> for screen size and screen density definitions.)</p>
+
+<p>Note that memory values specified below are considered minimum values and
+device implementations MAY allocate more memory per application.</p>
+
+<table>
+ <tr>
+    <th>Screen Layout</th>
+    <th>Screen Density</th>
+    <th>Minimum Application Memory</th>
+ </tr>
+ <tr>
+    <td rowspan="10">small/normal</td>
+    <td>120 dpi (ldpi)</td>
+    <td rowspan="2">32MB</td>
+ </tr>
+ <tr>
+    <td>160 dpi (mdpi)</td>
+ </tr>
+ <tr>
+    <td>213 dpi (tvdpi)</td>
+    <td rowspan="3">48MB</td>
+ </tr>
+ <tr>
+    <td>240 dpi (hdpi)</td>
+ </tr>
+ <tr>
+    <td>280 dpi (280dpi)</td>
+ </tr>
+ <tr>
+    <td>320 dpi (xhdpi)</td>
+    <td>80MB</td>
+ </tr>
+ <tr>
+    <td>400 dpi (400dpi)</td>
+    <td>96MB</td>
+ </tr>
+ <tr>
+    <td>480 dpi (xxhdpi)</td>
+    <td>128MB</td>
+ </tr>
+ <tr>
+    <td>560 dpi (560dpi)</td>
+    <td>192MB</td>
+ </tr>
+ <tr>
+    <td>640 dpi (xxxhdpi)</td>
+    <td>256MB</td>
+ </tr>
+ <tr>
+    <td rowspan="10">large</td>
+    <td>120 dpi (ldpi)</td>
+    <td>32MB</td>
+ </tr>
+ <tr>
+    <td>160 dpi (mdpi)</td>
+    <td>48MB</td>
+ </tr>
+ <tr>
+    <td>213 dpi (tvdpi)</td>
+    <td rowspan="2">80MB</td>
+ </tr>
+ <tr>
+    <td>240 dpi (hdpi)</td>
+ </tr>
+ <tr>
+    <td>280 dpi (280dpi)</td>
+    <td>96MB</td>
+ </tr>
+ <tr>
+    <td>320 dpi (xhdpi)</td>
+    <td>128MB</td>
+ </tr>
+ <tr>
+    <td>400 dpi (400dpi)</td>
+    <td>192MB</td>
+ </tr>
+ <tr>
+    <td>480 dpi (xxhdpi)</td>
+    <td>256MB</td>
+ </tr>
+ <tr>
+    <td>560 dpi (560dpi)</td>
+    <td>384MB</td>
+ </tr>
+ <tr>
+    <td>640 dpi (xxxhdpi)</td>
+    <td>512MB</td>
+ </tr>
+ <tr>
+    <td rowspan="10">xlarge</td>
+    <td>120 dpi (ldpi)</td>
+    <td>48MB</td>
+ </tr>
+ <tr>
+    <td>160 dpi (mdpi)</td>
+    <td>80MB</td>
+ </tr>
+ <tr>
+    <td>213 dpi (tvdpi)</td>
+    <td rowspan="2">96MB</td>
+ </tr>
+ <tr>
+    <td>240 dpi (hdpi)</td>
+ </tr>
+ <tr>
+    <td>280 dpi (280dpi)</td>
+    <td>144MB</td>
+ </tr>
+ <tr>
+    <td>320 dpi (xhdpi)</td>
+    <td>192MB</td>
+ </tr>
+ <tr>
+    <td>400 dpi (400dpi)</td>
+    <td>288MB</td>
+ </tr>
+ <tr>
+    <td>480 dpi (xxhdpi)</td>
+    <td>384MB</td>
+ </tr>
+ <tr>
+    <td>560 dpi (560dpi)</td>
+    <td>576MB</td>
+ </tr>
+ <tr>
+    <td>640 dpi (xxxhdpi)</td>
+    <td>768MB</td>
+ </tr>
+</table>
+
+
+<h2 id="3_8_user_interface_compatibility">3.8. User Interface Compatibility</h2>
+
+
+<h3 id="3_8_1_launcher_home_screen">3.8.1. Launcher (Home Screen)</h3>
+
+
+<p>Android includes a launcher application (home screen) and support for
+third-party applications to replace the device launcher (home screen). Device
+implementations that allow third-party applications to replace the device home
+screen MUST declare the platform feature android.software.home_screen.</p>
+
+<h3 id="3_8_2_widgets">3.8.2. Widgets</h3>
+
+<div class="note">
+<p>Widgets are optional for all Android device implementations, but SHOULD be
+supported on Android Handheld devices.</p>
+</div>
+
+
+<p>Android defines a component type and corresponding API and lifecycle that
+allows applications to expose an &ldquo;AppWidget&rdquo; to the end user [<a href="http://developer.android.com/guide/practices/ui_guidelines/widget_design.html">Resources, 21</a>] a feature that is strongly RECOMMENDED to be supported on Handheld Device
+implementations. Device implementations that support embedding widgets on the
+home screen MUST meet the following requirements and declare support for
+platform feature android.software.app_widgets.</p>
+
+<ul>
+  <li>Device launchers MUST include built-in support for AppWidgets, and expose user
+interface affordances to add, configure, view, and remove AppWidgets directly
+within the Launcher.</li>
+  <li>Device implementations MUST be capable of rendering widgets that are 4 x 4 in
+the standard grid size. See the App Widget Design Guidelines in the Android SDK
+documentation [<a href="http://developer.android.com/guide/practices/ui_guidelines/widget_design.html">Resources, 21</a>] for details.</li>
+  <li>Device implementations that include support for lock screen MAY support
+application widgets on the lock screen.</li>
+</ul>
+
+<h3 id="3_8_3_notifications">3.8.3. Notifications</h3>
+
+
+<p>Android includes APIs that allow developers to notify users of notable events [<a href="http://developer.android.com/guide/topics/ui/notifiers/notifications.html">Resources, 22</a>], using hardware and software features of the device.</p>
+
+<p>Some APIs allow applications to perform notifications or attract attention
+using hardware&#8212;specifically sound, vibration, and light. Device implementations
+MUST support notifications that use hardware features, as described in the SDK
+documentation, and to the extent possible with the device implementation
+hardware. For instance, if a device implementation includes a vibrator, it MUST
+correctly implement the vibration APIs. If a device implementation lacks
+hardware, the corresponding APIs MUST be implemented as no-ops. This behavior
+is further detailed in <a href="#7_hardware_compatibility">section 7</a>.</p>
+
+<p>Additionally, the implementation MUST correctly render all resources (icons, animation files
+etc.) provided for in the APIs
+[<a href="https://developer.android.com/guide/topics/resources/available-resources.html">Resources, 23</a>],
+or in the Status/System Bar icon style guide
+[<a href="http://developer.android.com/design/style/iconography.html">Resources, 24</a>],
+which in the case of an Android Television device includes the possibility to not display the
+notifications. Device implementers MAY provide an alternative user experience for
+notifications than that provided by the reference Android Open Source
+implementation; however, such alternative notification systems MUST support
+existing notification resources, as above. </p>
+
+<p>Android includes support for various notifications, such as:</p>
+
+<ul>
+  <li><strong>Rich notifications</strong>. Interactive Views for ongoing notifications.</li>
+  <li><strong>Heads-up notifications</strong>. Interactive Views users can act on or dismiss without leaving the current app.</li>
+  <li><strong>Lockscreen notifications</strong>. Notifications shown over a lock screen with granular control on visibility.</li>
+</ul>
+
+<p>Android device implementations, when such notifications are made visible, MUST properly execute
+Rich and Heads-up notifications and include the title/name, icon, text as documented in the Android
+APIs <a href="https://developer.android.com/design/patterns/notifications.html">[Resources, 25]</a>.
+</p>
+
+<p>Android includes Notification Listener Service APIs that allow apps (once
+explicitly enabled by the user) to receive a copy of all notifications as they
+are posted or updated. Device implementations MUST correctly and promptly send
+notifications in their entirety to all such installed and user-enabled listener
+services, including any and all metadata attached to the Notification object.</p>
+
+<h3 id="3_8_4_search">3.8.4. Search</h3>
+
+
+<p>Android includes APIs [<a href="http://developer.android.com/reference/android/app/SearchManager.html">Resources, 26</a>] that allow developers to incorporate search into their applications, and
+expose their application&rsquo;s data into the global system search. Generally
+speaking, this functionality consists of a single, system-wide user interface
+that allows users to enter queries, displays suggestions as users type, and
+displays results. The Android APIs allow developers to reuse this interface to
+provide search within their own apps, and allow developers to supply results to
+the common global search user interface.</p>
+
+<p>Android device implementations SHOULD include global search, a single, shared,
+system-wide search user interface capable of real-time suggestions in response
+to user input. Device implementations SHOULD implement the APIs that allow
+developers to reuse this user interface to provide search within their own
+applications. Device implementations that implement the global search interface
+MUST implement the APIs that allow third-party applications to add suggestions
+to the search box when it is run in global search mode. If no third-party
+applications are installed that make use of this functionality, the default
+behavior SHOULD be to display web search engine results and suggestions.</p>
+
+<h3 id="3_8_5_toasts">3.8.5. Toasts</h3>
+
+
+<p>Applications can use the &ldquo;Toast&rdquo; API to display short non-modal strings to the
+end user, that disappear after a brief period of time [<a href="http://developer.android.com/reference/android/widget/Toast.html">Resources, 27</a>]. Device implementations MUST display Toasts from applications to end users in
+some high-visibility manner.</p>
+
+<h3 id="3_8_6_themes">3.8.6. Themes</h3>
+
+
+<p>Android provides &ldquo;themes&rdquo; as a mechanism for applications to apply styles
+across an entire Activity or application.</p>
+
+<p>Android includes a &ldquo;Holo&rdquo; theme family as a set of defined styles for
+application developers to use if they want to match the Holo theme look and
+feel as defined by the Android SDK [<a href="http://developer.android.com/guide/topics/ui/themes.html">Resources, 28</a>]. Device implementations MUST NOT alter any of the Holo theme attributes
+exposed to applications [<a href="http://developer.android.com/reference/android/R.style.html">Resources, 29</a>].</p>
+
+<p>Android includes a &ldquo;Material&rdquo; theme family as a set of defined styles for
+application developers to use if they want to match the design theme&rsquo;s look and
+feel across the wide variety of different Android device types. Device
+implementations MUST support the &ldquo;Material&rdquo; theme family and MUST NOT alter any
+of the Material theme attributes or their assets exposed to applications [<a href="http://developer.android.com/reference/android/R.style.html#Theme_Material">Resources, 30</a>].</p>
+
+<p>Android also includes a &ldquo;Device Default&rdquo; theme family as a set of defined
+styles for application developers to use if they want to match the look and
+feel of the device theme as defined by the device implementer. Device
+implementations MAY modify the Device Default theme attributes exposed to
+applications [<a href="http://developer.android.com/reference/android/R.style.html">Resources, 29</a>].</p>
+
+<p>Android supports a new variant theme with translucent system bars, which allows
+application developers to fill the area behind the status and navigation bar
+with their app content. To enable a consistent developer experience in this
+configuration, it is important the status bar icon style is maintained across
+different device implementations. Therefore, Android device implementations
+MUST use white for system status icons (such as signal strength and battery
+level) and notifications issued by the system, unless the icon is indicating a
+problematic status [<a href="http://developer.android.com/reference/android/R.style.html">Resources, 29</a>].</p>
+
+<h3 id="3_8_7_live_wallpapers">3.8.7. Live Wallpapers</h3>
+
+
+<p>Android defines a component type and corresponding API and lifecycle that
+allows applications to expose one or more &ldquo;Live Wallpapers&rdquo; to the end user [<a href="http://developer.android.com/reference/android/service/wallpaper/WallpaperService.html">Resources, 31</a>]. Live wallpapers are animations, patterns, or similar images with limited
+input capabilities that display as a wallpaper, behind other applications.</p>
+
+<p>Hardware is considered capable of reliably running live wallpapers if it can
+run all live wallpapers, with no limitations on functionality, at a reasonable
+frame rate with no adverse effects on other applications. If limitations in the
+hardware cause wallpapers and/or applications to crash, malfunction, consume
+excessive CPU or battery power, or run at unacceptably low frame rates, the
+hardware is considered incapable of running live wallpaper. As an example, some
+live wallpapers may use an OpenGL 2.0 or 3.x context to render their content.
+Live wallpaper will not run reliably on hardware that does not support multiple
+OpenGL contexts because the live wallpaper use of an OpenGL context may
+conflict with other applications that also use an OpenGL context.</p>
+
+<p>Device implementations capable of running live wallpapers reliably as described
+above SHOULD implement live wallpapers, and when implemented MUST report the
+platform feature flag android.software.live_wallpaper.</p>
+
+<h3 id="3_8_8_activity_switching">3.8.8. Activity Switching</h3>
+
+<div class="note">
+<p>As the Recent function navigation key is OPTIONAL, the requirements to
+implement the overview screen is OPTIONAL for Android Television devices and
+Android Watch devices.</p>
+</div>
+
+
+<p>The upstream Android source code includes the overview screen [<a href="http://developer.android.com/guide/components/recents.html">Resources, 32</a>], a system-level user interface for task switching and displaying recently
+accessed activities and tasks using a thumbnail image of the application&rsquo;s
+graphical state at the moment the user last left the application. Device
+implementations including the recents function navigation key as detailed in <a href="#7_2_3_navigation_keys">section 7.2.3</a>, MAY alter the interface but MUST meet the following requirements:</p>
+
+<ul>
+  <li>MUST display affiliated recents as a group that moves together.</li>
+  <li>MUST support at least up to 20 displayed activities.</li>
+  <li>MUST at least display the title of 4 activities at a time.</li>
+  <li>SHOULD display highlight color, icon, screen title in recents.</li>
+  <li>MUST implement the screen pinning behavior [<a href="http://developer.android.com/about/versions/android-5.0.html#ScreenPinning">Resources, 33</a>] and provide the user with a settings menu to toggle the feature.</li>
+  <li>SHOULD display a closing affordance ("x") but MAY delay this until user
+interacts with screens.</li>
+</ul>
+
+<p>Device implementations are STRONGLY ENCOURAGED to use the upstream Android user
+interface (or a similar thumbnail-based interface) for the overview screen.</p>
+
+<h3 id="3_8_9_input_management">3.8.9. Input Management</h3>
+
+
+<p>Android includes support for Input Management and support for third-party input
+method editors [<a href="http://developer.android.com/guide/topics/text/creating-input-method.html">Resources, 34</a>]. Device implementations that allow users to use third-party input methods on
+the device MUST declare the platform feature android.software.input_methods and
+support IME APIs as defined in the Android SDK documentation.</p>
+
+<p>Device implementations that declare the android.software.input_methods feature
+MUST provide a user-accessible mechanism to add and configure third-party input
+methods. Device implementations MUST display the settings interface in response
+to the android.settings.INPUT_METHOD_SETTINGS intent.</p>
+
+<h3 id="3_8_10_lock_screen_media_control">3.8.10. Lock Screen Media Control</h3>
+
+
+<p>The Remote Control Client API is deprecated from Android 5.0 in favor of the
+Media Notification Template that allows media applications to integrate with
+playback controls that are displayed on the lock screen [<a href="http://developer.android.com/reference/android/app/Notification.MediaStyle.html">Resources, 35</a>].
+Device implementations that support a lock screen, unless an Android Automotive or Watch
+implementation, MUST display the Lockscreen Notifications including the Media Notification
+Template.</p>
+
+<h3 id="3_8_11_dreams">3.8.11. Dreams</h3>
+
+
+<p>Android includes support for interactive screensavers called Dreams [<a href="http://developer.android.com/reference/android/service/dreams/DreamService.html">Resources, 36</a>]. Dreams allows users to interact with applications when a device connected to
+a power source is idle or docked in a desk dock. Android Watch devices MAY
+implement Dreams, but other types of device implementations SHOULD include
+support for Dreams and provide a settings option for users to configure Dreams
+in response to the android.settings.DREAM_SETTINGS intent.</p>
+
+<h3 id="3_8_12_location">3.8.12. Location</h3>
+
+
+<p>When a device has a hardware sensor (e.g. GPS) that is capable of providing the
+location coordinates, location modes MUST be displayed in the Location menu
+within Settings [<a href="http://developer.android.com/reference/android/provider/Settings.Secure.html#LOCATION_MODE">Resources, 37</a>].</p>
+
+<h3 id="3_8_13_unicode_and_font">3.8.13. Unicode and Font</h3>
+
+
+<p>Android includes support for color emoji characters. When Android device
+implementations include an IME, devices SHOULD provide an input method to the
+user for the Emoji characters defined in Unicode 6.1 [<a href="http://www.unicode.org/versions/Unicode6.1.0/">Resources, 38</a>]. All devices MUST be capable of rendering these emoji characters in color glyph.</p>
+
+<p>Android includes support for Roboto 2 font with different
+weights&mdash;sans-serif-thin, sans-serif-light, sans-serif-medium, sans-serif-black,
+sans-serif-condensed, sans-serif-condensed-light&mdash;which MUST all be included for
+the languages available on the device and full Unicode 7.0 coverage of Latin,
+Greek, and Cyrillic, including the Latin Extended A, B, C, and D ranges, and
+all glyphs in the currency symbols block of Unicode 7.0.</p>
+
+<h2 id="3_9_device_administration">3.9. Device Administration</h2>
+
+
+<p>Android includes features that allow security-aware applications to perform
+device administration functions at the system level, such as enforcing password
+policies or performing remote wipe, through the Android Device Administration
+API [<a href="http://developer.android.com/guide/topics/admin/device-admin.html">Resources, 39</a>].
+Device implementations MUST provide an implementation of the DevicePolicyManager class
+[<a href="http://developer.android.com/reference/android/app/admin/DevicePolicyManager.html">Resources, 40</a>].
+Device implementations that include support for PIN (numeric) or PASSWORD
+(alphanumeric) based lock screens MUST support the full range of device
+administration policies defined in the Android SDK documentation
+[<a href="http://developer.android.com/guide/topics/admin/device-admin.html">Resources, 39</a>]
+and report the platform feature android.software.device_admin.</p>
+
+<p>Device implementations MAY have a preinstalled application performing device
+administration functions but this application MUST NOT be set out-of-the box as
+the default Device Owner app [<a href="http://developer.android.com/reference/android/app/admin/DevicePolicyManager.html#isDeviceOwnerApp(java.lang.String)">Resources, 41</a>].</p>
+
+<h2 id="3_10_accessibility">3.10. Accessibility</h2>
+
+
+<p>Android provides an accessibility layer that helps users with disabilities to
+navigate their devices more easily. In addition, Android provides platform APIs
+that enable accessibility service implementations to receive callbacks for user
+and system events and generate alternate feedback mechanisms, such as
+text-to-speech, haptic feedback, and trackball/d-pad navigation [<a href="http://developer.android.com/reference/android/accessibilityservice/AccessibilityService.html">Resources, 42</a>].</p>
+
+<p>Device implementations include the following requirements:</p>
+
+<ul>
+<li>Android Automotive implementations SHOULD provide an implementation of the
+Android accessibility framework consistent with the default Android
+implementation.</li>
+<li>Device implementations (Android Automotive excluded) MUST provide an
+implementation of the Android accessibility framework consistent with the
+default Android implementation.</li>
+<li>Device implementations (Android Automotive excluded) MUST support
+third-party accessibility service implementations through the
+android.accessibilityservice APIs
+[<a href="http://developer.android.com/reference/android/view/accessibility/package-summary.html">Resources, 43</a>]</li>
+<li>Device implementations (Android Automotive excluded) MUST generate
+AccessibilityEvents and deliver these events to all registered
+AccessibilityService implementations in a manner consistent with the default
+Android implementation</li>
+<li> Device implementations (Android Automotive and Android Watch devices with
+no audio output excluded), MUST provide a user-accessible mechanism to enable
+and disable accessibility services, and MUST display this interface in response
+to the android.provider.Settings.ACTION_ACCESSIBILITY_SETTINGS intent.</li>
+</ul>
+
+<p>Additionally, device implementations SHOULD provide an implementation of an
+accessibility service on the device, and SHOULD provide a mechanism for users
+to enable the accessibility service during device setup. An open source
+implementation of an accessibility service is available from the Eyes Free
+project [<a href="http://code.google.com/p/eyes-free/">Resources, 44</a>].</p>
+
+<h2 id="3_11_text-to-speech">3.11. Text-to-Speech</h2>
+
+
+<p>Android includes APIs that allow applications to make use of text-to-speech
+(TTS) services and allows service providers to provide implementations of TTS
+services [<a href="http://developer.android.com/reference/android/speech/tts/package-summary.html">Resources, 45</a>]. Device implementations reporting the feature android.hardware.audio.output
+MUST meet these requirements related to the Android TTS framework. </p>
+
+<p>Android Automotive implementations:</p>
+<ul>
+<li>MUST support the Android TTS framework APIs.</li>
+<li>MAY support installation of third-party TTS engines. If supported, partners
+MUST provide a user-accessible interface that allows the user to select a TTS
+engine for use at system level.</li>
+</ul>
+
+<p>All other device implementations:</p>
+
+<ul>
+  <li> MUST support the Android TTS framework APIs and SHOULD include a TTS engine
+supporting the languages available on the device. Note that the upstream
+Android open source software includes a full-featured TTS engine
+implementation.
+  <li> MUST support installation of third-party TTS engines
+  <li> MUST provide a user-accessible interface that allows users to select a TTS
+engine for use at the system level
+</ul>
+
+<h2 id="3_12_tv_input_framework">3.12. TV Input Framework</h2>
+
+
+<p>The Android Television Input Framework (TIF) simplifies the delivery of live
+content to Android Television devices. TIF provides a standard API to create
+input modules that control Android Television devices. Android Television
+device implementations MUST support Television Input Framework [<a href="http://source.android.com/devices/tv/index.html">Resources, 46</a>].</p>
+
+<p>Device implementations that support TIF MUST declare the platform feature
+android.software.live_tv.</p>
+
+<h1 id="4_application_packaging_compatibility">4. Application Packaging Compatibility</h1>
+
+
+<p>Device implementations MUST install and run Android &ldquo;.apk&rdquo; files as generated
+by the &ldquo;aapt&rdquo; tool included in the official Android SDK [<a href="http://developer.android.com/tools/help/index.html">Resources, 47</a>].</p>
+
+<p>Devices implementations MUST NOT extend either the .apk [<a href="http://developer.android.com/guide/components/fundamentals.html">Resources, 48</a>], Android Manifest [<a href="http://developer.android.com/guide/topics/manifest/manifest-intro.html">Resources, 49</a>], Dalvik bytecode [<a href="https://android.googlesource.com/platform/dalvik/+/lollipop-release/docs/">Resources, 20</a>], or RenderScript bytecode formats in such a way that would prevent those
+files from installing and running correctly on other compatible devices.</p>
+
+<h1 id="5_multimedia_compatibility">5. Multimedia Compatibility</h1>
+
+
+<h2 id="5_1_media_codecs">5.1. Media Codecs</h2>
+
+
+<p>Device implementations MUST support the core media formats specified in the
+Android SDK documentation [<a href="http://developer.android.com/guide/appendix/media-formats.html">Resources, 50</a>] except where explicitly permitted in this document. Specifically, device
+implementations MUST support the media formats, encoders, decoders, file types,
+and container formats defined in the tables below and reported via MediaCodecList
+[<a href="http://developer.android.com/reference/android/media/MediaCodecList.html">Resources,112</a>].
+Device implementations MUST also be able to decode all profiles reported in its CamcorderProfile
+[<a href="http://developer.android.com/reference/android/media/CamcorderProfile.html">Resources,
+113</a>].
+
+All of these codecs are
+provided as software implementations in the preferred Android implementation
+from the Android Open Source Project.</p>
+
+<p>Please note that neither Google nor the Open Handset Alliance make any
+representation that these codecs are free from third-party patents. Those
+intending to use this source code in hardware or software products are advised
+that implementations of this code, including in open source software or
+shareware, may require patent licenses from the relevant patent holders.</p>
+
+<h3 id="5_1_1_audio_codecs">5.1.1. Audio Codecs</h3>
+
+<table>
+ <tr>
+    <th>Format/Codec</th>
+    <th>Encoder</th>
+    <th>Decoder</th>
+    <th>Details</th>
+    <th>Supported File Types/Container Formats</th>
+ </tr>
+ <tr>
+    <td>MPEG-4 AAC Profile</p>
+
+<p>(AAC LC)</td>
+    <td>REQUIRED<sup>1</sup></td>
+    <td>REQUIRED</td>
+    <td>Support for mono/stereo/5.0/5.12 content with standard sampling rates from 8 to
+48 kHz.</td>
+    <td>
+    <ul>
+    <li class="table_list">3GPP (.3gp)</li>
+    <li class="table_list">MPEG-4 (.mp4, .m4a)</li>
+    <li class="table_list">ADTS raw AAC (.aac, decode in Android 3.1+, encode in Android 4.0+, ADIF not
+supported)</li>
+    <li class="table_list">MPEG-TS (.ts, not seekable, Android 3.0+)</li></ul></td>
+ </tr>
+ <tr>
+    <td>MPEG-4 HE AAC Profile (AAC+)</td>
+    <td>REQUIRED<sup>1</sup><br>(Android 4.1+)</td>
+    <td>REQUIRED</td>
+    <td>Support for mono/stereo/5.0/5.12 content with standard sampling rates from 16
+to 48 kHz.</td>
+    <td></td>
+ </tr>
+ <tr>
+    <td>MPEG-4 HE AACv2</p>
+
+<p>Profile (enhanced AAC+)</td>
+    <td> </td>
+    <td>REQUIRED</td>
+    <td>Support for mono/stereo/5.0/5.12 content with standard sampling rates from 16
+to 48 kHz.</td>
+    <td></td>
+ </tr>
+ <tr>
+    <td>AAC ELD (enhanced low delay AAC)</td>
+    <td>REQUIRED<sup>1</sup> </p>
+
+<p>(Android 4.1+)</td>
+    <td>REQUIRED</p>
+
+<p>(Android 4.1+)</td>
+    <td>Support for mono/stereo content with standard sampling rates from 16 to 48 kHz.</td>
+    <td></td>
+ </tr>
+ <tr>
+    <td>AMR-NB</td>
+    <td>REQUIRED<sup>3</sup></td>
+    <td>REQUIRED<sup>3</sup></td>
+    <td>4.75 to 12.2 kbps sampled @ 8kHz</td>
+    <td>3GPP (.3gp)</td>
+ </tr>
+ <tr>
+    <td>AMR-WB</td>
+    <td>REQUIRED<sup>3</sup></td>
+    <td>REQUIRED<sup>3</sup></td>
+    <td>9 rates from 6.60 kbit/s to 23.85 kbit/s sampled @ 16kHz</td>
+    <td></td>
+ </tr>
+ <tr>
+    <td>FLAC</td>
+    <td></td>
+    <td>REQUIRED <br>(Android 3.1+)</td>
+    <td>Mono/Stereo (no multichannel). Sample rates up to 48 kHz (but up to 44.1 kHz is
+recommended on devices with 44.1 kHz output, as the 48 to 44.1 kHz downsampler
+does not include a low-pass filter). 16-bit recommended; no dither applied for
+24-bit.</td>
+    <td>FLAC (.flac) only</td>
+ </tr>
+ <tr>
+    <td>MP3</td>
+    <td></td>
+    <td>REQUIRED</td>
+    <td>Mono/Stereo 8-320Kbps constant (CBR) or variable bitrate (VBR)</td>
+    <td>MP3 (.mp3)</td>
+ </tr>
+ <tr>
+    <td>MIDI</td>
+    <td></td>
+    <td>REQUIRED</td>
+    <td>MIDI Type 0 and 1. DLS Version 1 and 2. XMF and Mobile XMF. Support for
+ringtone formats RTTTL/RTX, OTA, and iMelody</td>
+    <td><ul>
+    <li class="table_list">Type 0 and 1 (.mid, .xmf, .mxmf)</li>
+    <li class="table_list">RTTTL/RTX (.rtttl, .rtx)</li>
+    <li class="table_list">OTA (.ota)</li>
+    <li class="table_list">iMelody (.imy)</li></ul></td>
+ </tr>
+ <tr>
+    <td>Vorbis</td>
+    <td></td>
+    <td>REQUIRED</td>
+    <td></td>
+    <td><ul>
+    <li class="table_list">Ogg (.ogg)</li>
+    <li class="table_list">Matroska (.mkv, Android 4.0+)</li></ul></td>
+ </tr>
+ <tr>
+    <td>PCM/WAVE</td>
+    <td>REQUIRED<sup>4</sup><br> (Android 4.1+)</td>
+    <td>REQUIRED</td>
+    <td>16-bit linear PCM (rates up to limit of hardware). Devices MUST support
+sampling rates for raw PCM recording at 8000, 11025, 16000, and 44100 Hz
+frequencies.</td>
+    <td>WAVE (.wav)</td>
+ </tr>
+ <tr>
+    <td>Opus</td>
+    <td></td>
+    <td>REQUIRED<br> (Android 5.0+)</td>
+    <td></td>
+    <td>Matroska (.mkv)</td>
+ </tr>
+</table>
+
+
+<p class="table_footnote"> 1 Required for device implementations that define android.hardware.microphone
+but optional for Android Watch device implementations.</p>
+
+<p class="table_footnote">2 Only downmix of 5.0/5.1 content is required; recording or rendering more than
+2 channels is optional.</p>
+
+<p class="table_footnote">3 Required for Android Handheld device implementations. </p>
+
+<p class="table_footnote">4 Required for device implementations that define android.hardware.microphone,
+including Android Watch device implementations.</p>
+
+<h3 id="5_1_2_image_codecs">5.1.2. Image Codecs</h3>
+
+<table>
+ <tr>
+    <th>Format/Codec</th>
+    <th>Encoder</th>
+    <th>Decoder</th>
+    <th>Details</th>
+    <th>Supported File Types/Container Formats</th>
+ </tr>
+ <tr>
+    <td>JPEG</td>
+    <td>REQUIRED</td>
+    <td>REQUIRED</td>
+    <td>Base+progressive</td>
+    <td>JPEG (.jpg)</td>
+ </tr>
+ <tr>
+    <td>GIF</td>
+    <td></td>
+    <td>REQUIRED</td>
+    <td></td>
+    <td>GIF (.gif)</td>
+ </tr>
+ <tr>
+    <td>PNG</td>
+    <td>REQUIRED</td>
+    <td>REQUIRED</td>
+    <td></td>
+    <td>PNG (.png)</td>
+ </tr>
+ <tr>
+    <td>BMP</td>
+    <td></td>
+    <td>REQUIRED</td>
+    <td></td>
+    <td>BMP (.bmp)</td>
+ </tr>
+ <tr>
+    <td>WebP</td>
+    <td>REQUIRED</td>
+    <td>REQUIRED</td>
+    <td></td>
+    <td>WebP (.webp)</td>
+ </tr>
+</table>
+
+
+<h3 id="5_1_3_video_codecs">5.1.3. Video Codecs</h3>
+
+<p>Video codecs are optional for Android Watch device implementations.</p>
+
+<table>
+ <tr>
+    <th>Format/Codec</th>
+    <th>Encoder</th>
+    <th>Decoder</th>
+    <th>Details</th>
+    <th>Supported File Types/<br>Container Formats</th>
+ </tr>
+ <tr>
+    <td>H.263</td>
+    <td>REQUIRED<sup>1</sup></td>
+    <td>REQUIRED<sup>2</sup></td>
+    <td></td>
+    <td><ul>
+    <li class="table_list">3GPP (.3gp)</li>
+    <li class="table_list">MPEG-4 (.mp4)</li></ul></td>
+ </tr>
+ <tr>
+    <td>H.264 AVC</td>
+    <td>REQUIRED<sup>2</sup></td>
+    <td>REQUIRED<sup>2</sup></td>
+    <td>See <a href="#5_2_video_encoding">section 5.2 </a>and <a href="#5_3_video_decoding">5.3</a> for details</td>
+    <td><ul>
+    <li class="table_list">3GPP (.3gp)</li>
+    <li class="table_list">MPEG-4 (.mp4)</li>
+    <li class="table_list">MPEG-TS (.ts, AAC audio only, not seekable, Android 3.0+)</li></ul></td>
+ </tr>
+ <tr>
+    <td>H.265 HEVC</td>
+    <td></td>
+    <td>REQUIRED<sup>5</sup></td>
+    <td>See <a href="#5_3_video_decoding">section 5.3</a> for details</td>
+    <td>MPEG-4 (.mp4)</td>
+ </tr>
+ <tr>
+    <td>MPEG-4 SP</td>
+    <td></td>
+    <td>REQUIRED<sup>2</sup></td>
+    <td></td>
+    <td>3GPP (.3gp)</td>
+ </tr>
+ <tr>
+    <td>VP83</td>
+    <td>REQUIRED<sup>2</sup></p>
+
+<p>(Android 4.3+)</td>
+    <td>REQUIRED<sup>2</sup></p>
+
+<p>(Android 2.3.3+)</td>
+    <td>See <a href="#5_2_video_encoding">section 5.2</a> and <a href="#5_3_video_decoding">5.3</a> for details</td>
+    <td><ul>
+    <li class="table_list">WebM (.webm) [<a href="http://www.webmproject.org/">Resources, 110</a></li>
+    <li class="table_list">Matroska (.mkv, Android 4.0+)4</li></ul></td>
+ </tr>
+ <tr>
+    <td>VP9</td>
+    <td></td>
+    <td>REQUIRED<sup>2</sup><br> (Android 4.4+)</td>
+    <td>See <a href="#5_3_video_decoding">section 5.3</a> for details</td>
+    <td><ul>
+    <li class="table_list">WebM (.webm) [<a href="http://www.webmproject.org/">Resources, 110</a>]</li>
+    <li class="table_list">Matroska (.mkv, Android 4.0+)4</li></ul></td>
+ </tr>
+</table>
+
+
+<p class="table_footnote">1 Required for device implementations that include camera hardware and define
+android.hardware.camera or android.hardware.camera.front.</p>
+
+<p class="table_footnote">2 Required for device implementations except Android Watch devices. </p>
+
+<p class="table_footnote">3 For acceptable quality of web video streaming and video-conference services,
+device implementations SHOULD use a hardware VP8 codec that meets the
+requirements in [<a href="http://www.webmproject.org/hardware/rtc-coding-requirements/">Resources, 51</a>].</p>
+
+<p class="table_footnote">4 Device implementations SHOULD support writing Matroska WebM files.</p>
+
+<p class="table_footnote">5 Strongly recommended for Android Automotive, optional for Android Watch, and required for all other device types.</p>
+
+<h2 id="5_2_video_encoding">5.2. Video Encoding</h2>
+
+<div class="note">
+<p>Video codecs are optional for Android Watch device implementations.</p>
+</div>
+
+
+<p>Android device implementations with H.264 codec support, MUST support Baseline
+Profile Level 3 and the following SD (Standard Definition) video encoding
+profiles and SHOULD support Main Profile Level 4 and the following HD (High
+Definition) video encoding profiles. Android Television devices are STRONGLY
+RECOMMENDED to encode HD 1080p video at 30 fps.</p>
+<table>
+ <tr>
+    <th></th>
+    <th>SD (Low quality)</th>
+    <th>SD (High quality)</th>
+    <th>HD 720p1</th>
+    <th>HD 1080p1</th>
+ </tr>
+ <tr>
+    <th>Video resolution</th>
+    <td>320 x 240 px</td>
+    <td>720 x 480 px</td>
+    <td>1280 x 720 px</td>
+    <td>1920 x 1080 px</td>
+ </tr>
+ <tr>
+    <th>Video frame rate</th>
+    <td>20 fps</td>
+    <td>30 fps</td>
+    <td>30 fps</td>
+    <td>30 fps</td>
+ </tr>
+ <tr>
+    <th>Video bitrate</th>
+    <td>384 Kbps</td>
+    <td>2 Mbps</td>
+    <td>4 Mbps</td>
+    <td>10 Mbps</td>
+ </tr>
+</table>
+
+
+<p class="table_footnote">1 When supported by hardware, but STRONGLY RECOMMENDED for Android Television
+devices.</p>
+
+<p>Android device implementations with VP8 codec support MUST support the SD video
+encoding profiles and SHOULD support the following HD (High Definition) video
+encoding profiles.</p>
+<table>
+ <tr>
+    <th></th>
+    <th>SD (Low quality)</th>
+    <th>SD (High quality)</th>
+    <th>HD 720p1</th>
+    <th>HD 1080p1</th>
+ </tr>
+ <tr>
+    <th>Video resolution</th>
+    <td>320 x 180 px</td>
+    <td>640 x 360 px</td>
+    <td>1280 x 720 px</td>
+    <td>1920 x 1080 px</td>
+ </tr>
+ <tr>
+    <th>Video frame rate</th>
+    <td>30 fps</td>
+    <td>30 fps</td>
+    <td>30 fps</td>
+    <td>30 fps</td>
+ </tr>
+ <tr>
+    <th>Video bitrate</th>
+    <td>800 Kbps </td>
+    <td>2 Mbps</td>
+    <td>4 Mbps</td>
+    <td>10 Mbps</td>
+ </tr>
+</table>
+
+<p class="table_footnote">1 When supported by hardware.</p>
+
+<h2 id="5_3_video_decoding">5.3. Video Decoding</h2>
+
+<div class="note">
+<p>Video codecs are optional for Android Watch device implementations.</p>
+</div>
+
+
+<p>Device implementations MUST support dynamic video resolution switching within
+the same stream for VP8, VP9, H.264, and H.265 codecs.</p>
+
+<p>Android device implementations with H.264 decoders, MUST support Baseline
+Profile Level 3 and the following SD video decoding profiles and SHOULD support
+the HD decoding profiles. Android Television devices MUST support High Profile
+Level 4.2 and the HD 1080p decoding profile.</p>
+<table>
+ <tr>
+    <th></th>
+    <th>SD (Low quality)</th>
+    <th>SD (High quality)</th>
+    <th>HD 720p1</th>
+    <th>HD 1080p1</th>
+ </tr>
+ <tr>
+    <th>Video resolution</th>
+    <td>320 x 240 px</td>
+    <td>720 x 480 px</td>
+    <td>1280 x 720 px</td>
+    <td>1920 x 1080 px</td>
+ </tr>
+ <tr>
+    <th>Video frame rate</th>
+    <td>30 fps</td>
+    <td>30 fps</td>
+    <td>30 fps / 60 fps2</td>
+    <td>30 fps / 60 fps2</td>
+ </tr>
+ <tr>
+    <th>Video bitrate</th>
+    <td>800 Kbps </td>
+    <td>2 Mbps</td>
+    <td>8 Mbps</td>
+    <td>20 Mbps</td>
+ </tr>
+</table>
+
+
+<p class="table_footnote">1 Required for Android Television device implementations, but for other device
+types only when supported by hardware.</p>
+
+<p class="table_footnote">2 Required for Android Television device implementations.</p>
+
+<p>Android device implementations when supporting VP8 codec as described in <a href="#5_1_3_video_codecs">section 5.1.3</a>, MUST support the following SD decoding profiles and SHOULD support the HD
+decoding profiles. Android Television devices MUST support the HD 1080p
+decoding profile.  </p>
+<table>
+ <tr>
+    <th></th>
+    <th>SD (Low quality)</th>
+    <th>SD (High quality)</th>
+    <th>HD 720p1</th>
+    <th>HD 1080p1</th>
+ </tr>
+ <tr>
+    <th>Video resolution</th>
+    <td>320 x 180 px</td>
+    <td>640 x 360 px</td>
+    <td>1280 x 720 px</td>
+    <td>1920 x 1080 px</td>
+ </tr>
+ <tr>
+    <th>Video frame rate</th>
+    <td>30 fps</td>
+    <td>30 fps</td>
+    <td>30 fps / 60 fps2</td>
+    <td>30 / 60 fps2</td>
+ </tr>
+ <tr>
+    <th>Video bitrate</th>
+    <td>800 Kbps </td>
+    <td>2 Mbps</td>
+    <td>8 Mbps</td>
+    <td>20 Mbps</td>
+ </tr>
+</table>
+
+
+<p class="table_footnote">1 Required for Android Television device implementations, but for other type of
+devices only when supported by hardware.</p>
+
+<p class="table_footnote">2 Required for Android Television device implementations.</p>
+
+<p>Android device implementations, when supporting VP9 codec as described in <a href="#5_1_3_video_codecs">section 5.1.3</a>, MUST support the following SD video decoding profiles and SHOULD support the
+HD decoding profiles. Android Television devices are STRONGLY RECOMMENDED to
+support the HD 1080p decoding profile and SHOULD support the UHD decoding
+profile. When the UHD video decoding profile is supported, it MUST support 8
+bit color depth.</p>
+<table>
+ <tr>
+    <th></th>
+    <th>SD (Low quality)</th>
+    <th>SD (High quality)</th>
+    <th>HD 720p 1</th>
+    <th>HD 1080p 2</th>
+    <th>UHD 2</th>
+ </tr>
+ <tr>
+    <th>Video resolution</th>
+    <td>320 x 180 px</td>
+    <td>640 x 360 px</td>
+    <td>1280 x 720 px</td>
+    <td>1920 x 1080 px</td>
+    <td>3840 x 2160 px</td>
+ </tr>
+ <tr>
+    <th>Video frame rate</th>
+    <td>30 fps</td>
+    <td>30 fps</td>
+    <td>30 fps</td>
+    <td>30 fps</td>
+    <td>30 fps</td>
+ </tr>
+ <tr>
+    <th>Video bitrate</th>
+    <td>600 Kbps </td>
+    <td>1.6 Mbps</td>
+    <td>4 Mbps</td>
+    <td>10 Mbps</td>
+    <td>20 Mbps</td>
+ </tr>
+</table>
+
+
+<p class="table_footnote">1 Required for Android Television device implementations, but for other type of
+devices only when supported by hardware.</p>
+
+<p class="table_footnote">2 STRONGLY RECOMMENDED for Android Television device implementations when
+supported by hardware.</p>
+
+<p>Android device implementations, when supporting H.265 codec as described in <a href="#5_1_3_video_codecs">section 5.1.3</a>, MUST support the Main Profile Level 3 Main tier and the following SD video
+decoding profiles and SHOULD support the HD decoding profiles. Android
+Television devices MUST support the Main Profile Level 4.1 Main tier and the HD
+1080p decoding profile and SHOULD support Main10 Level 5 Main Tier profile and
+the UHD decoding profile.</p>
+<table>
+ <tr>
+    <th></th>
+    <th>SD (Low quality)</th>
+    <th>SD (High quality)</th>
+    <th>HD 720p </strong>1 </td>
+    <th>HD 1080p </strong>1 </td>
+    <th>UHD </strong>2</td>
+ </tr>
+ <tr>
+    <th>Video resolution</th>
+    <td>352 x 288 px</td>
+    <td>640 x 360 px</td>
+    <td>1280 x 720 px</td>
+    <td>1920 x 1080 px</td>
+    <td>3840 x 2160 px</td>
+ </tr>
+ <tr>
+    <th>Video frame rate</th>
+    <td>30 fps</td>
+    <td>30 fps</td>
+    <td>30 fps</td>
+    <td>30 fps</td>
+    <td>30 fps</td>
+ </tr>
+ <tr>
+    <th>Video bitrate</th>
+    <td>600 Kbps </td>
+    <td>1.6 Mbps</td>
+    <td>4 Mbps</td>
+    <td>10 Mbps</td>
+    <td>20 Mbps</td>
+ </tr>
+</table>
+
+
+<p class="table_footnote">1 Required for Android Television device implementation, but for other type of
+devices only when supported by hardware.</p>
+
+<p class="table_footnote">2 Required for Android Television device implementations when supported by
+hardware.</p>
+
+<h2 id="5_4_audio_recording">5.4. Audio Recording</h2>
+
+
+<p>While some of the requirements outlined in this section are stated as SHOULD
+since Android 4.3, the Compatibility Definition for a future version is planned
+to change these to MUST. Existing and new Android devices are <strong>very strongly encouraged</strong> to meet these requirements, or they will not be able to attain Android
+compatibility when upgraded to the future version.</p>
+
+<h3 id="5_4_1_raw_audio_capture">5.4.1. Raw Audio Capture</h3>
+
+
+<p>Device implementations that declare android.hardware.microphone MUST allow
+capture of raw audio content with the following characteristics:</p>
+
+<ul>
+  <li><strong>Format</strong>: Linear PCM, 16-bit
+  <li><strong>Sampling rates</strong>: 8000, 11025, 16000, 44100
+  <li><strong>Channels</strong>: Mono
+</ul>
+
+<p>Device implementations that declare android.hardware.microphone SHOULD allow
+capture of raw audio content with the following characteristics:</p>
+
+<ul>
+  <li><strong>Format</strong>: Linear PCM, 16-bit
+  <li><strong>Sampling rates</strong>: 22050, 48000
+  <li><strong>Channels</strong>: Stereo
+</ul>
+
+<h3 id="5_4_2_capture_for_voice_recognition">5.4.2. Capture for Voice Recognition</h3>
+
+
+<p>In addition to the above recording specifications, when an application has
+started recording an audio stream using the
+android.media.MediaRecorder.AudioSource.VOICE_RECOGNITION audio source:</p>
+
+<ul>
+  <li>The device SHOULD exhibit approximately flat amplitude versus frequency
+characteristics: specifically, ±3 dB, from 100 Hz to 4000 Hz.
+  <li>Audio input sensitivity SHOULD be set such that a 90 dB sound power level (SPL)
+source at 1000 Hz yields RMS of 2500 for 16-bit samples.
+  <li>PCM amplitude levels SHOULD linearly track input SPL changes over at least a 30
+dB range from -18 dB to +12 dB re 90 dB SPL at the microphone.
+  <li>Total harmonic distortion SHOULD be less than 1% for 1Khz at 90 dB SPL input
+level at the microphone.
+  <li>Noise reduction processing, if present, MUST be disabled.
+  <li>Automatic gain control, if present, MUST be disabled
+</ul>
+
+<p>If the platform supports noise suppression technologies tuned for speech
+recognition, the effect MUST be controllable from the
+android.media.audiofx.NoiseSuppressor API. Moreover, the UUID field for the
+noise suppressor&rsquo;s effect descriptor MUST uniquely identify each implementation
+of the noise suppression technology.</p>
+
+<h3 id="5_4_3_capture_for_rerouting_of_playback">5.4.3. Capture for Rerouting of Playback</h3>
+
+
+<p>The android.media.MediaRecorder.AudioSource class includes the REMOTE_SUBMIX
+audio source. Devices that declare android.hardware.audio.output MUST properly
+implement the REMOTE_SUBMIX audio source so that when an application uses the
+android.media.AudioRecord API to record from this audio source, it can capture
+a mix of all audio streams except for the following:</p>
+
+<ul>
+  <li>STREAM_RING
+  <li>STREAM_ALARM
+  <li>STREAM_NOTIFICATION
+</ul>
+
+<h2 id="5_5_audio_playback">5.5. Audio Playback</h2>
+
+
+<p>Device implementations that declare android.hardware.audio.output MUST conform
+to the requirements in this section.</p>
+
+<h3 id="5_5_1_raw_audio_playback">5.5.1. Raw Audio Playback</h3>
+
+
+<p>The device MUST allow playback of raw audio content with the following
+characteristics:</p>
+
+<ul>
+  <li><strong>Format</strong>: Linear PCM, 16-bit</li>
+  <li><strong>Sampling rates</strong>: 8000, 11025, 16000, 22050, 32000, 44100</li>
+  <li><strong>Channels</strong>: Mono, Stereo</li>
+</ul>
+
+<p>The device SHOULD allow playback of raw audio content with the following
+characteristics:</p>
+
+<ul>
+  <li><strong>Sampling rates</strong>: 24000, 48000</li>
+</ul>
+
+<h3 id="5_5_2_audio_effects">5.5.2. Audio Effects</h3>
+
+
+<p>Android provides an API for audio effects for device implementations [<a href="http://developer.android.com/reference/android/media/audiofx/AudioEffect.html">Resources, 52</a>]. Device implementations that declare the feature
+android.hardware.audio.output:</p>
+
+<ul>
+  <li>MUST support the EFFECT_TYPE_EQUALIZER and EFFECT_TYPE_LOUDNESS_ENHANCER
+implementations controllable through the AudioEffect subclasses Equalizer,
+LoudnessEnhancer.</li>
+  <li>MUST support the visualizer API implementation, controllable through the
+Visualizer class.</li>
+  <li>SHOULD support the EFFECT_TYPE_BASS_BOOST, EFFECT_TYPE_ENV_REVERB,
+EFFECT_TYPE_PRESET_REVERB, and EFFECT_TYPE_VIRTUALIZER implementations
+controllable through the AudioEffect sub-classes BassBoost,
+EnvironmentalReverb, PresetReverb, and Virtualizer.</li>
+</ul>
+
+<h3 id="5_5_3_audio_output_volume">5.5.3. Audio Output Volume</h3>
+
+
+<p>Android Television device implementations MUST include support for system
+Master Volume and digital audio output volume attenuation on supported outputs,
+except for compressed audio passthrough output (where no audio decoding is done
+on the device).</p>
+
+<h2 id="5_6_audio_latency">5.6. Audio Latency</h2>
+
+
+<p>Audio latency is the time delay as an audio signal passes through a system.
+Many classes of applications rely on short latencies, to achieve real-time
+sound effects.</p>
+
+<p>For the purposes of this section, use the following definitions:</p>
+
+<ul>
+  <li><strong>output latency</strong>. The interval between when an application writes a frame of PCM-coded data and
+when the corresponding sound can be heard by an external listener or observed
+by a transducer.</li>
+  <li><strong>cold output latency</strong>. The output latency for the first frame, when the audio output system has been
+idle and powered down prior to the request.</li>
+  <li><strong>continuous output latency</strong>. The output latency for subsequent frames, after the device is playing audio.</li>
+  <li><strong>input latency</strong>. The interval between when an external sound is presented to the device and
+when an application reads the corresponding frame of PCM-coded data.</li>
+  <li><strong>cold input latency</strong>. The sum of lost input time and the input latency for the first frame, when the
+audio input system has been idle and powered down prior to the request.</li>
+  <li><strong>continuous input latency</strong>. The input latency for subsequent frames, while the device is capturing audio.</li>
+  <li><strong>cold output jitter</strong>. The variance among separate measurements of cold output latency values.</li>
+  <li><strong>cold input jitter</strong>. The variance among separate measurements of cold input latency values.</li>
+  <li><strong>continuous round-trip latency</strong>. The sum of continuous input latency plus continuous output latency plus 5
+milliseconds.</li>
+  <li><strong>OpenSL ES PCM buffer queue API</strong>. The set of PCM-related OpenSL ES APIs within Android NDK; see
+NDK_root/docs/opensles/index.html.</li>
+</ul>
+
+<p>Device implementations that declare android.hardware.audio.output SHOULD meet
+or exceed these audio output requirements:</p>
+
+<ul>
+  <li>cold output latency of 100 milliseconds or less</li>
+  <li>continuous output latency of 45 milliseconds or less</li>
+  <li>minimize the cold output jitter</li>
+</ul>
+
+<p>If a device implementation meets the requirements of this section after any
+initial calibration when using the OpenSL ES PCM buffer queue API, for
+continuous output latency and cold output latency over at least one supported
+audio output device, it MAY report support for low-latency audio, by reporting
+the feature android.hardware.audio.low_latency via the
+android.content.pm.PackageManager class [<a href="http://developer.android.com/reference/android/content/pm/PackageManager.html">Resources, 53</a>]. Conversely, if the device implementation does not meet these requirements it
+MUST NOT report support for low-latency audio.</p>
+
+<p>Device implementations that include android.hardware.microphone SHOULD meet
+these input audio requirements:</p>
+
+<ul>
+  <li>cold input latency of 100 milliseconds or less</li>
+  <li>continuous input latency of 30 milliseconds or less</li>
+  <li>continuous round-trip latency of 50 milliseconds or less</li>
+  <li>minimize the cold input jitter</li>
+</ul>
+
+<h2 id="5_7_network_protocols">5.7. Network Protocols</h2>
+
+
+<p>Devices MUST support the media network protocols for audio and video playback
+as specified in the Android SDK documentation [<a href="http://developer.android.com/guide/appendix/media-formats.html">Resources, 50</a>]. Specifically, devices MUST support the following media network protocols:</p>
+
+<ul>
+  <li>RTSP (RTP, SDP)</li>
+  <li>HTTP(S) progressive streaming</li>
+  <li>HTTP(S) Live Streaming draft protocol, Version 3 [<a href="http://tools.ietf.org/html/draft-pantos-http-live-streaming-03">Resources, 54</a>]</li>
+</ul>
+
+<h2 id="5_8_secure_media">5.8. Secure Media</h2>
+
+
+<p>Device implementations that support secure video output and are capable of
+supporting secure surfaces MUST declare support for Display.FLAG_SECURE. Device
+implementations that declare support for Display.FLAG_SECURE, if they support a
+wireless display protocol, MUST secure the link with a cryptographically strong
+mechanism such as HDCP 2.x or higher for Miracast wireless displays. Similarly
+if they support a wired external display, the device implementations MUST
+support HDCP 1.2 or higher. Android Television device implementations MUST
+support HDCP 2.2 for devices supporting 4K resolution and HDCP 1.4 or above for
+lower resolutions. The upstream Android open source implementation includes
+support for wireless (Miracast) and wired (HDMI) displays that satisfies this
+requirement.</p>
+
+<h1 id="6_developer_tools_and_options_compatibility">6. Developer Tools and Options Compatibility</h1>
+
+
+<h2 id="6_1_developer_tools">6.1. Developer Tools</h2>
+
+
+<p>Device implementations MUST support the Android Developer Tools provided in the
+Android SDK. Android compatible devices MUST be compatible with:</p>
+
+<ul>
+  <li><strong>Android Debug Bridge (adb)</strong> [<a href="http://developer.android.com/tools/help/adb.html">Resources, 55</a>]</li>
+</ul>
+
+<p>Device implementations MUST support all adb functions as documented in the
+Android SDK including dumpsys [<a href="https://source.android.com/devices/input/diagnostics.html">Resources, 56</a>]. The device-side adb daemon MUST be inactive by default and there MUST be a
+user-accessible mechanism to turn on the Android Debug Bridge. If a device
+implementation omits USB peripheral mode, it MUST implement the Android Debug
+Bridge via local-area network (such as Ethernet or 802.11). </p>
+
+<p>Android includes support for secure adb. Secure adb enables adb on known
+authenticated hosts. Device implementations MUST support secure adb.</p>
+
+<ul>
+  <li><strong>Dalvik Debug Monitor Service (ddms)</strong> [<a href="http://developer.android.com/tools/debugging/ddms.html">Resources, 57</a>]</li>
+</ul>
+
+<p>Device implementations MUST support all ddms features as documented in the
+Android SDK. As ddms uses adb, support for ddms SHOULD be inactive by default,
+but MUST be supported whenever the user has activated the Android Debug Bridge,
+as above.</p>
+
+<ul>
+  <li><strong>Monkey</strong> [<a href="http://developer.android.com/tools/help/monkey.html">Resources, 58</a>]</li>
+</ul>
+
+<p>Device implementations MUST include the Monkey framework, and make it available
+for applications to use.</p>
+
+<ul>
+  <li><strong>SysTrace</strong> [<a href="http://developer.android.com/tools/help/systrace.html">Resources, 59</a>]</li>
+</ul>
+
+<p>Device implementations MUST support systrace tool as documented in the Android
+SDK. Systrace must be inactive by default, and there MUST be a user-accessible
+mechanism to turn on Systrace.</p>
+
+<p>Most Linux-based systems and Apple Macintosh systems recognize Android devices
+using the standard Android SDK tools, without additional support; however
+Microsoft Windows systems typically require a driver for new Android devices.
+(For instance, new vendor IDs and sometimes new device IDs require custom USB
+drivers for Windows systems.) If a device implementation is unrecognized by the
+adb tool as provided in the standard Android SDK, device implementers MUST
+provide Windows drivers allowing developers to connect to the device using the
+adb protocol. These drivers MUST be provided for Windows XP, Windows Vista,
+Windows 7, Windows 8, and Windows 9 in both 32-bit and 64-bit versions.</p>
+
+<h2 id="6_2_developer_options">6.2. Developer Options</h2>
+
+
+<p>Android includes support for developers to configure application
+development-related settings. Device implementations MUST honor the
+android.settings.APPLICATION_DEVELOPMENT_SETTINGS intent to show application
+development-related settings [<a href="http://developer.android.com/reference/android/provider/Settings.html#ACTION_APPLICATION_DEVELOPMENT_SETTINGS">Resources, 60</a>]. The upstream Android implementation hides the Developer Options menu by
+default and enables users to launch Developer Options after pressing seven (7)
+times on the <strong>Settings</strong> > <strong>About Device</strong> > <strong>Build Number</strong> menu item. Device implementations MUST provide a consistent experience for
+Developer Options. Specifically, device implementations MUST hide Developer
+Options by default and MUST provide a mechanism to enable Developer Options
+that is consistent with the upstream Android implementation.</p>
+
+<h1 id="7_hardware_compatibility">7. Hardware Compatibility</h1>
+
+
+<p>If a device includes a particular hardware component that has a corresponding
+API for third-party developers, the device implementation MUST implement that
+API as described in the Android SDK documentation. If an API in the SDK
+interacts with a hardware component that is stated to be optional and the
+device implementation does not possess that component:</p>
+
+<ul>
+  <li>Complete class definitions (as documented by the SDK) for the component APIs
+MUST still be presented.
+  <li>The API&rsquo;s behaviors MUST be implemented as no-ops in some reasonable fashion.
+  <li>API methods MUST return null values where permitted by the SDK documentation.
+  <li>API methods MUST return no-op implementations of classes where null values are
+not permitted by the SDK documentation.
+  <li>API methods MUST NOT throw exceptions not documented by the SDK documentation.
+</ul>
+
+<p>A typical example of a scenario where these requirements apply is the telephony
+API: even on non-phone devices, these APIs must be implemented as reasonable
+no-ops.</p>
+
+<p>Device implementations MUST consistently report accurate hardware configuration
+information via the getSystemAvailableFeatures() and hasSystemFeature(String)
+methods on the android.content.pm.PackageManager class for the same build
+fingerprint. [<a href="http://developer.android.com/reference/android/content/pm/PackageManager.html">Resources, 53]</a></p>
+
+<h2 id="7_1_display_and_graphics">7.1. Display and Graphics</h2>
+
+
+<p>Android includes facilities that automatically adjust application assets and UI
+layouts appropriately for the device, to ensure that third-party applications
+run well on a variety of hardware configurations [<a href="http://developer.android.com/guide/practices/screens_support.html">Resources, 61</a>]. Devices MUST properly implement these APIs and behaviors, as detailed in
+this section.</p>
+
+<p>The units referenced by the requirements in this section are defined as
+follows:</p>
+
+<ul>
+  <li><strong>physical diagonal size</strong>. The distance in inches between two opposing corners of the illuminated portion
+of the display.</li>
+  <li><strong>dots per inch (dpi)</strong>. The number of pixels encompassed by a linear horizontal or vertical span of
+1&rdquo;. Where dpi values are listed, both horizontal and vertical dpi must fall
+within the range.</li>
+  <li><strong>aspect ratio</strong>. The ratio of the pixels of the longer dimension
+  to the shorter dimension of the screen. For example, a display of 480x854 pixels
+  would be 854/480 = 1.779, or roughly &ldquo;16:9&rdquo;.</li>
+  <li><strong>density-independent pixel (dp)</strong> The virtual pixel unit normalized to a 160 dpi screen, calculated as: pixels =
+dps * (density/160).</li>
+</ul>
+
+<h3 id="7_1_1_screen_configuration">7.1.1. Screen Configuration</h3>
+
+
+<h4 id="7_1_1_1_screen_size">7.1.1.1. Screen Size</h4>
+
+<div class="note">
+<p>Android Watch devices (detailed in <a href="#2_device_types">section 2</a>) MAY have smaller screen sizes as described in this section.</p>
+</div>
+
+<p>The Android UI framework supports a variety of different screen sizes, and
+allows applications to query the device screen size (aka &ldquo;screen layout") via
+android.content.res.Configuration.screenLayout with the SCREENLAYOUT_SIZE_MASK.
+Device implementations MUST report the correct screen size as defined in the
+Android SDK documentation [<a href="http://developer.android.com/guide/practices/screens_support.html">Resources, 61</a>] and determined by the upstream Android platform. Specifically, device
+implementations MUST report the correct screen size according to the following
+logical density-independent pixel (dp) screen dimensions.</p>
+
+<ul>
+  <li>Devices MUST have screen sizes of at least 426 dp x 320 dp (&lsquo;small&rsquo;), unless it
+is an Android Watch device.</li>
+  <li>Devices that report screen size &lsquo;normal&rsquo; MUST have screen sizes of at least 480
+dp x 320 dp.</li>
+  <li>Devices that report screen size &lsquo;large&rsquo; MUST have screen sizes of at least 640
+dp x 480 dp.</li>
+  <li>Devices that report screen size &lsquo;xlarge&rsquo; MUST have screen sizes of at least 960
+dp x 720 dp.</li>
+</ul>
+
+<p>In addition, </p>
+
+<ul>
+  <li>Android Watch devices MUST have a screen with the physical diagonal size in the
+range from 1.1 to 2.5 inches.</li>
+  <li>Other types of Android device implementations, with a physically integrated
+screen, MUST have a screen at least 2.5 inches in physical diagonal size.</li>
+</ul>
+
+<p>Devices MUST NOT change their reported screen size at any time.</p>
+
+<p>Applications optionally indicate which screen sizes they support via the
+<supports-screens> attribute in the AndroidManifest.xml file. Device
+implementations MUST correctly honor applications' stated support for small,
+normal, large, and xlarge screens, as described in the Android SDK
+documentation.</p>
+
+<h4 id="7_1_1_2_screen_aspect_ratio">7.1.1.2. Screen Aspect Ratio</h4>
+
+<div class="note">
+<p>Android Watch devices MAY have an aspect ratio of 1.0 (1:1).</p>
+</div>
+
+
+<p>The screen aspect ratio MUST be a value from 1.3333 (4:3) to 1.86 (roughly
+16:9), but Android Watch devices MAY have an aspect ratio of 1.0 (1:1) because
+such a device implementation will use a UI_MODE_TYPE_WATCH as the
+android.content.res.Configuration.uiMode.</p>
+
+<h4 id="7_1_1_3_screen_density">7.1.1.3. Screen Density</h4>
+
+
+<p>The Android UI framework defines a set of standard logical densities to help
+application developers target application resources. Device implementations
+MUST report only one of the following logical Android framework densities
+through the android.util.DisplayMetrics APIs, and MUST execute applications at
+this standard density and MUST NOT change the value at at any time for the
+default display.</p>
+
+<ul>
+  <li>120 dpi (ldpi)</li>
+  <li>160 dpi (mdpi)</li>
+  <li>213 dpi (tvdpi)</li>
+  <li>240 dpi (hdpi)</li>
+  <li>280 dpi (280dpi)</li>
+  <li>320 dpi (xhdpi)</li>
+  <li>400 dpi (400dpi)</li>
+  <li>480 dpi (xxhdpi)</li>
+  <li>560 dpi (560dpi)</li>
+  <li>640 dpi (xxxhdpi)</li>
+</ul>
+
+<p>Device implementations SHOULD define the standard Android framework density
+that is numerically closest to the physical density of the screen, unless that
+logical density pushes the reported screen size below the minimum supported. If
+the standard Android framework density that is numerically closest to the
+physical density results in a screen size that is smaller than the smallest
+supported compatible screen size (320 dp width), device implementations SHOULD
+report the next lowest standard Android framework density.</p>
+
+<h3 id="7_1_2_display_metrics">7.1.2. Display Metrics</h3>
+
+
+<p>Device implementations MUST report correct values for all display metrics
+defined in android.util.DisplayMetrics [<a href="http://developer.android.com/reference/android/util/DisplayMetrics.html">Resources, 62</a>] and MUST report the same values regardless of whether the embedded or
+external screen is used as the default display.</p>
+
+<h3 id="7_1_3_screen_orientation">7.1.3. Screen Orientation</h3>
+
+
+<p>Devices MUST report which screen orientations they support
+(android.hardware.screen.portrait and/or android.hardware.screen.landscape) and
+MUST report at least one supported orientation. For example, a device with a
+fixed orientation landscape screen, such as a television or laptop, SHOULD only
+report android.hardware.screen.landscape.</p>
+
+<p>Devices that report both screen orientations MUST support dynamic orientation
+by applications to either portrait or landscape screen orientation. That is,
+the device must respect the application&rsquo;s request for a specific screen
+orientation. Device implementations MAY select either portrait or landscape
+orientation as the default.</p>
+
+<p>Devices MUST report the correct value for the device&rsquo;s current orientation,
+whenever queried via the android.content.res.Configuration.orientation,
+android.view.Display.getOrientation(), or other APIs.</p>
+
+<p>Devices MUST NOT change the reported screen size or density when changing
+orientation.</p>
+
+<h3 id="7_1_4_2d_and_3d_graphics_acceleration">7.1.4. 2D and 3D Graphics Acceleration</h3>
+
+
+<p>Device implementations MUST support both OpenGL ES 1.0 and 2.0, as embodied and
+detailed in the Android SDK documentations. Device implementations SHOULD
+support OpenGL ES 3.0 or 3.1 on devices capable of supporting it. Device
+implementations MUST also support Android RenderScript, as detailed in the
+Android SDK documentation [<a href="http://developer.android.com/guide/topics/renderscript/">Resources, 63</a>].</p>
+
+<p>Device implementations MUST also correctly identify themselves as supporting
+OpenGL ES 1.0, OpenGL ES 2.0, OpenGL ES 3.0 or OpenGL 3.1. That is:</p>
+
+<ul>
+  <li>The managed APIs (such as via the GLES10.getString()method MUST report support
+for OpenGL ES 1.0 and OpenGL ES 2.0.</li>
+  <li>The native C/C++ OpenGL APIs (APIs available to apps via libGLES_v1CM.so,
+libGLES_v2.so, or libEGL.so) MUST report support for OpenGL ES 1.0 and OpenGL
+ES 2.0.</li>
+  <li>Device implementations that declare support for OpenGL ES 3.0 or 3.1 MUST
+support the corresponding managed APIs and include support for native C/C++
+APIs. On device implementations that declare support for OpenGL ES 3.0 or 3.1,
+libGLESv2.so MUST export the corresponding function symbols in addition to the
+OpenGL ES 2.0 function symbols.</li>
+</ul>
+
+<p>In addition to OpenGL ES 3.1, Android provides an extension pack with Java
+interfaces [<a href="https://developer.android.com/reference/android/opengl/GLES31Ext.html">Resources, 64</a>] and native support for advanced graphics functionality such as tessellation
+and the ASTC texture compression format. Android device implementations MAY
+support this extension pack, and&mdash;only if fully implemented&mdash;MUST identify the
+support through the android.hardware.opengles.aep feature flag.</p>
+
+<p>Also, device implementations MAY implement any desired OpenGL ES extensions.
+However, device implementations MUST report via the OpenGL ES managed and
+native APIs all extension strings that they do support, and conversely MUST NOT
+report extension strings that they do not support.</p>
+
+<p>Note that Android includes support for applications to optionally specify that
+they require specific OpenGL texture compression formats. These formats are
+typically vendor-specific. Device implementations are not required by Android
+to implement any specific texture compression format. However, they SHOULD
+accurately report any texture compression formats that they do support, via the
+getString() method in the OpenGL API.</p>
+
+<p>Android includes a mechanism for applications to declare that they want to
+enable hardware acceleration for 2D graphics at the Application, Activity,
+Window, or View level through the use of a manifest tag
+android:hardwareAccelerated or direct API calls [<a href="http://developer.android.com/guide/topics/graphics/hardware-accel.html">Resources, 65</a>].</p>
+
+<p>Device implementations MUST enable hardware acceleration by default, and MUST
+disable hardware acceleration if the developer so requests by setting
+android:hardwareAccelerated="false&rdquo; or disabling hardware acceleration directly
+through the Android View APIs.</p>
+
+<p>In addition, device implementations MUST exhibit behavior consistent with the
+Android SDK documentation on hardware acceleration [<a href="http://developer.android.com/guide/topics/graphics/hardware-accel.html">Resources, 65</a>].</p>
+
+<p>Android includes a TextureView object that lets developers directly integrate
+hardware-accelerated OpenGL ES textures as rendering targets in a UI hierarchy.
+Device implementations MUST support the TextureView API, and MUST exhibit
+consistent behavior with the upstream Android implementation.</p>
+
+<p>Android includes support for EGL_ANDROID_RECORDABLE, an EGLConfig attribute
+that indicates whether the EGLConfig supports rendering to an ANativeWindow
+that records images to a video. Device implementations MUST support
+EGL_ANDROID_RECORDABLE extension [<a href="https://www.khronos.org/registry/egl/extensions/ANDROID/EGL_ANDROID_recordable.txt">Resources, 66</a>].</p>
+
+<h3 id="7_1_5_legacy_application_compatibility_mode">7.1.5. Legacy Application Compatibility Mode</h3>
+
+
+<p>Android specifies a &ldquo;compatibility mode&rdquo; in which the framework operates in a
+'normal' screen size equivalent (320dp width) mode for the benefit of legacy
+applications not developed for old versions of Android that pre-date
+screen-size independence.</p>
+
+<ul>
+<li>Android Automotive does not support legacy compatibility mode.</li>
+<li>All other device implementations MUST include support for legacy application
+compatibility mode as implemented by the upstream Android open source code. That
+is, device implementations MUST NOT alter the triggers or thresholds at which
+compatibility mode is activated, and MUST NOT alter the behavior of the
+compatibility mode itself.</li>
+</ul>
+
+<h3 id="7_1_6_screen_technology">7.1.6. Screen Technology</h3>
+
+
+<p>The Android platform includes APIs that allow applications to render rich
+graphics to the display. Devices MUST support all of these APIs as defined by
+the Android SDK unless specifically allowed in this document. </p>
+
+<ul>
+  <li>Devices MUST support displays capable of rendering 16-bit color graphics and
+SHOULD support displays capable of 24-bit color graphics.</li>
+  <li>Devices MUST support displays capable of rendering animations.</li>
+  <li>The display technology used MUST have a pixel aspect ratio (PAR) between 0.9
+and 1.15. That is, the pixel aspect ratio MUST be near square (1.0) with a 10 ~
+15% tolerance.</li>
+</ul>
+
+<h3 id="7_1_7_external_displays">7.1.7. Secondary Displays</h3>
+
+
+<p>Android includes support for secondary display to enable media sharing
+capabilities and developer APIs for accessing external displays. If a device
+supports an external display either via a wired, wireless, or an embedded
+additional display connection then the device implementation MUST implement the
+display manager API as described in the Android SDK documentation [<a href="http://developer.android.com/reference/android/hardware/display/DisplayManager.html">Resources, 67</a>].</p>
+
+<h2 id="7_2_input_devices">7.2. Input Devices</h2>
+
+<p>Devices MUST support a touchscreen or meet the requirements listed in 7.2.2
+for non-touch navigation.</p>
+
+<h3 id="7_2_1_keyboard">7.2.1. Keyboard</h3>
+
+<div class="note">
+<p>Android Watch and Android Automotive implementations MAY implement a soft
+keyboard. All other device implementations MUST implement a soft keyboard and:</p>
+</div>
+
+
+<p>Device implementations:</p>
+
+<ul>
+  <li>MUST include support for the Input Management Framework (which allows
+third-party developers to create Input Method Editors&mdash;i.e. soft keyboard) as
+detailed at <a href="http://developer.android.com">http://developer.android.com</a>.</li>
+  <li>MUST provide at least one soft keyboard implementation (regardless of whether a
+hard keyboard is present) except for Android Watch devices where the screen
+size makes it less reasonable to have a soft keyboard.</li>
+  <li>MAY include additional soft keyboard implementations.</li>
+  <li>MAY include a hardware keyboard.</li>
+  <li>MUST NOT include a hardware keyboard that does not match one of the formats
+specified in android.content.res.Configuration.keyboard [<a href="http://developer.android.com/reference/android/content/res/Configuration.html">Resources, 68</a>] (QWERTY or 12-key).</li>
+</ul>
+
+<h3 id="7_2_2_non-touch_navigation">7.2.2. Non-touch Navigation</h3>
+
+<div class="note">
+<p>Android Television devices MUST support D-pad.</p>
+</div>
+
+<p>Device implementations:</p>
+
+<ul>
+  <li>MAY omit a non-touch navigation option (trackball, d-pad, or wheel) if the
+device implementation is not an Android Television device.</li>
+  <li>MUST report the correct value for android.content.res.Configuration.navigation
+[<a href="http://developer.android.com/reference/android/content/res/Configuration.html">Resources, 68</a>].</li>
+  <li>MUST provide a reasonable alternative user interface mechanism for the
+selection and editing of text, compatible with Input Management Engines. The
+upstream Android open source implementation includes a selection mechanism
+suitable for use with devices that lack non-touch navigation inputs.</li>
+</ul>
+
+<h3 id="7_2_3_navigation_keys">7.2.3. Navigation Keys</h3>
+
+<div class="note">
+<p>The availability and visibility requirement of the Home, Recents, and Back
+functions differ between device types as described in this section.</p>
+</div>
+
+<p>The Home, Recents, and Back functions (mapped to the key events KEYCODE_HOME,
+KEYCODE_APP_SWITCH, KEYCODE_BACK, respectively) are essential to the Android
+navigation paradigm and therefore:</p>
+
+<ul>
+  <li>Android Handheld device implementations MUST provide the Home, Recents, and
+Back functions.</li>
+  <li>Android Television device implementations MUST provide the Home and Back
+functions.</li>
+  <li>Android Watch device implementations MUST have the Home function available to
+the user, and the Back function except for when it is in UI_MODE_TYPE_WATCH.</li>
+  <li>Android Automotive implementations MUST provide the Home function and MAY
+provide Back and Recent functions.</li>
+  <li>All other types of device implementations MUST provide the Home and Back
+functions.</li>
+</ul>
+
+<p>These functions MAY be implemented via dedicated physical buttons (such as
+mechanical or capacitive touch buttons), or MAY be implemented using dedicated
+software keys on a distinct portion of the screen, gestures, touch panel, etc.
+Android supports both implementations. All of these functions MUST be
+accessible with a single action (e.g. tap, double-click or gesture) when
+visible.</p>
+
+<p>Recents function, if provided, MUST have a visible button or icon unless hidden
+together with other navigation functions in full-screen mode. This does not
+apply to devices upgrading from earlier Android versions that have physical
+buttons for navigation and no recents key.</p>
+
+<p> The Home and Back functions, if provided, MUST each have a visible button or
+icon unless hidden together with other navigation functions in full-screen mode
+or when the uiMode UI_MODE_TYPE_MASK is set to UI_MODE_TYPE_WATCH.</p>
+
+<p>The Menu function is deprecated in favor of action bar since Android 4.0.
+Therefore the new device implementations shipping with Android 5.0 and later MUST NOT
+implement a dedicated physical button for the Menu function. Older device
+implementations SHOULD NOT implement a dedicated physical button for the Menu
+function, but if the physical Menu button is implemented and the device is
+running applications with targetSdkVersion > 10, the device implementation:</p>
+
+<ul>
+  <li>MUST display the action overflow button on the action bar when it is visible
+and the resulting action overflow menu popup is not empty. For a device
+implementation launched before Android 4.4 but upgrading to Android 5.1, this
+is RECOMMENDED.</li>
+  <li>MUST NOT modify the position of the action overflow popup displayed by
+selecting the overflow button in the action bar.</li>
+  <li>MAY render the action overflow popup at a modified position on the screen when
+it is displayed by selecting the physical menu button.</li>
+</ul>
+
+<p>For backwards compatibility, device implementations MUST make the Menu function
+available to applications when targetSdkVersion is less than 10, either by a physical
+button, a software key, or gestures. This Menu function should be presented
+unless hidden together with other navigation functions.</p>
+
+<p>Android supports Assist action [<a href="http://developer.android.com/reference/android/content/Intent.html#ACTION_ASSIST">Resources, 69</a>]. Android device implementations except for Android Watch devices MUST make
+the Assist action available to the user at all times when running applications.
+The Assist action SHOULD be implemented as a long-press on the Home button or a
+swipe-up gesture on the software Home key. This function MAY be implemented via
+another physical button, software key, or gesture, but MUST be accessible with
+a single action (e.g. tap, double-click, or gesture) when other navigation keys
+are visible.</p>
+
+<p>Device implementations MAY use a distinct portion of the screen to display the
+navigation keys, but if so, MUST meet these requirements:</p>
+
+<ul>
+  <li>Device implementation navigation keys MUST use a distinct portion of the
+screen, not available to applications, and MUST NOT obscure or otherwise
+interfere with the portion of the screen available to applications.</li>
+  <li>Device implementations MUST make available a portion of the display to
+applications that meets the requirements defined in <a href="#7_1_1_screen_configuration">section 7.1.1</a>.</li>
+  <li>Device implementations MUST display the navigation keys when applications do
+not specify a system UI mode, or specify SYSTEM_UI_FLAG_VISIBLE.</li>
+  <li>Device implementations MUST present the navigation keys in an unobtrusive &ldquo;low
+profile&rdquo; (eg. dimmed) mode when applications specify
+SYSTEM_UI_FLAG_LOW_PROFILE.</li>
+  <li>Device implementations MUST hide the navigation keys when applications specify
+SYSTEM_UI_FLAG_HIDE_NAVIGATION.</li>
+</ul>
+
+<h3 id="7_2_4_touchscreen_input">7.2.4. Touchscreen Input</h3>
+
+<div class="note">
+<p>Android Handhelds and Watch Devices MUST support touchscreen input.</p>
+</div>
+
+
+<p>Device implementations SHOULD have a pointer input system of some kind (either
+mouse-like or touch). However, if a device implementation does not support a
+pointer input system, it MUST NOT report the android.hardware.touchscreen or
+android.hardware.faketouch feature constant. Device implementations that do
+include a pointer input system:</p>
+
+<ul>
+  <li>SHOULD support fully independently tracked pointers, if the device input system
+supports multiple pointers.</li>
+  <li>MUST report the value of android.content.res.Configuration.touchscreen [<a href="http://developer.android.com/reference/android/content/res/Configuration.html">Resources, 68</a>] corresponding to the type of the specific touchscreen on the device.</li>
+</ul>
+
+<p>Android includes support for a variety of touchscreens, touch pads, and fake
+touch input devices. Touchscreen based device implementations are associated
+with a display [<a href="http://source.android.com/devices/tech/input/touch-devices.html">Resources, 70</a>] such that the user has the impression of directly manipulating items on
+screen. Since the user is directly touching the screen, the system does not
+require any additional affordances to indicate the objects being manipulated.
+In contrast, a fake touch interface provides a user input system that
+approximates a subset of touchscreen capabilities. For example, a mouse or
+remote control that drives an on-screen cursor approximates touch, but requires
+the user to first point or focus then click. Numerous input devices like the
+mouse, trackpad, gyro-based air mouse, gyro-pointer, joystick, and multi-touch
+trackpad can support fake touch interactions. Android includes the feature
+constant android.hardware.faketouch, which corresponds to a high-fidelity
+non-touch (pointer-based) input device such as a mouse or trackpad that can
+adequately emulate touch-based input (including basic gesture support), and
+indicates that the device supports an emulated subset of touchscreen
+functionality. Device implementations that declare the fake touch feature MUST
+meet the fake touch requirements in <a href="#7_2_5_fake_touch_input">section 7.2.5</a>.</p>
+
+<p>Device implementations MUST report the correct feature corresponding to the
+type of input used. Device implementations that include a touchscreen
+(single-touch or better) MUST report the platform feature constant
+android.hardware.touchscreen. Device implementations that report the platform
+feature constant android.hardware.touchscreen MUST also report the platform
+feature constant android.hardware.faketouch. Device implementations that do not
+include a touchscreen (and rely on a pointer device only) MUST NOT report any
+touchscreen feature, and MUST report only android.hardware.faketouch if they
+meet the fake touch requirements in <a href="#7_2_5_fake_touch_input">section 7.2.5</a>.</p>
+
+<h3 id="7_2_5_fake_touch_input">7.2.5. Fake Touch Input</h3>
+
+
+<p>Device implementations that declare support for android.hardware.faketouch:</p>
+
+<ul>
+  <li>MUST report the absolute X and Y screen positions of the pointer location and
+display a visual pointer on the screen [<a href="http://developer.android.com/reference/android/view/MotionEvent.html">Resources, 71</a>].</li>
+  <li>MUST report touch event with the action code that specifies the state change
+that occurs on the pointer going down or up on the screen [<a href="http://developer.android.com/reference/android/view/MotionEvent.html">Resources, 71</a>].</li>
+  <li>MUST support pointer down and up on an object on the screen, which allows users
+to emulate tap on an object on the screen.</li>
+  <li>MUST support pointer down, pointer up, pointer down then pointer up in the same
+place on an object on the screen within a time threshold, which allows users to
+emulate double tap on an object on the screen [<a href="http://developer.android.com/reference/android/view/MotionEvent.html">Resources, 71</a>].</li>
+  <li>MUST support pointer down on an arbitrary point on the screen, pointer move to
+any other arbitrary point on the screen, followed by a pointer up, which allows
+users to emulate a touch drag.</li>
+  <li>MUST support pointer down then allow users to quickly move the object to a
+different position on the screen and then pointer up on the screen, which
+allows users to fling an object on the screen.</li>
+</ul>
+
+<p>Devices that declare support for android.hardware.faketouch.multitouch.distinct
+MUST meet the requirements for faketouch above, and MUST also support distinct
+tracking of two or more independent pointer inputs.</p>
+
+<h3 id="7_2_6_game_controller_support">7.2.6. Game Controller Support</h3>
+
+
+<p>Android Television device implementations MUST support button mappings for game
+controllers as listed below. The upstream Android implementation includes
+implementation for game controllers that satisfies this requirement. </p>
+
+<h4 id="7_2_6_1_button_mappings">7.2.6.1. Button Mappings</h4>
+
+
+<p>Android Television device implementations MUST support the following key
+mappings:</p>
+<table>
+ <tr>
+    <th>Button</th>
+    <th>HID Usage</strong><sup>2</sup></td>
+    <th>Android Button</th>
+ </tr>
+ <tr>
+    <td><a href="http://developer.android.com/reference/android/view/KeyEvent.html#KEYCODE_BUTTON_A">A</a><sup>1</sup></td>
+    <td>0x09 0x0001</td>
+    <td>KEYCODE_BUTTON_A (96)</td>
+ </tr>
+ <tr>
+    <td><a href="http://developer.android.com/reference/android/view/KeyEvent.html#KEYCODE_BUTTON_B">B</a><sup>1</sup></td>
+    <td>0x09 0x0002</td>
+    <td>KEYCODE_BUTTON_B (97)</td>
+ </tr>
+ <tr>
+    <td><a href="http://developer.android.com/reference/android/view/KeyEvent.html#KEYCODE_BUTTON_X">X</a><sup>1</sup></td>
+    <td>0x09 0x0004</td>
+    <td>KEYCODE_BUTTON_X (99)</td>
+ </tr>
+ <tr>
+    <td><a href="http://developer.android.com/reference/android/view/KeyEvent.html#KEYCODE_BUTTON_Y">Y</a><sup>1</sup></td>
+    <td>0x09 0x0005</td>
+    <td>KEYCODE_BUTTON_Y (100)</td>
+ </tr>
+ <tr>
+    <td><a href="http://developer.android.com/reference/android/view/KeyEvent.html#KEYCODE_DPAD_UP">D-pad up</a><sup>1</sup></p>
+
+<p><a href="http://developer.android.com/reference/android/view/KeyEvent.html#KEYCODE_DPAD_DOWN">D-pad down</a><sup>1</sup></td>
+    <td>0x01 0x00393</td>
+    <td><a href="http://developer.android.com/reference/android/view/MotionEvent.html#AXIS_HAT_Y">AXIS_HAT_Y</a><sup>4</sup></td>
+ </tr>
+ <tr>
+    <td><a href="http://developer.android.com/reference/android/view/KeyEvent.html#KEYCODE_DPAD_LEFT">D-pad left</a>1</p>
+
+<p><a href="http://developer.android.com/reference/android/view/KeyEvent.html#KEYCODE_DPAD_RIGHT">D-pad right</a><sup>1</sup></td>
+    <td>0x01 0x00393</td>
+    <td><a href="http://developer.android.com/reference/android/view/MotionEvent.html#AXIS_HAT_X">AXIS_HAT_X</a><sup>4</sup></td>
+ </tr>
+ <tr>
+    <td><a href="http://developer.android.com/reference/android/view/KeyEvent.html#KEYCODE_BUTTON_L1">Left shoulder button</a><sup>1</sup></td>
+    <td>0x09 0x0007</td>
+    <td>KEYCODE_BUTTON_L1 (102)</td>
+ </tr>
+ <tr>
+    <td><a href="http://developer.android.com/reference/android/view/KeyEvent.html#KEYCODE_BUTTON_R1">Right shoulder button</a><sup>1</sup></td>
+    <td>0x09 0x0008</td>
+    <td>KEYCODE_BUTTON_R1 (103)</td>
+ </tr>
+ <tr>
+    <td><a href="http://developer.android.com/reference/android/view/KeyEvent.html#KEYCODE_BUTTON_THUMBL">Left stick click</a><sup>1</sup></td>
+    <td>0x09 0x000E</td>
+    <td>KEYCODE_BUTTON_THUMBL (106)</td>
+ </tr>
+ <tr>
+    <td><a href="http://developer.android.com/reference/android/view/KeyEvent.html#KEYCODE_BUTTON_THUMBR">Right stick click</a><sup>1</sup></td>
+    <td>0x09 0x000F</td>
+    <td>KEYCODE_BUTTON_THUMBR (107)</td>
+ </tr>
+ <tr>
+    <td><a href="http://developer.android.com/reference/android/view/KeyEvent.html#KEYCODE_HOME">Home</a><sup>1</sup></td>
+    <td>0x0c 0x0223</td>
+    <td>KEYCODE_HOME (3)</td>
+ </tr>
+ <tr>
+    <td><a href="http://developer.android.com/reference/android/view/KeyEvent.html#KEYCODE_BACK">Back</a><sup>1</sup></td>
+    <td>0x0c 0x0224</td>
+    <td>KEYCODE_BACK (4)</td>
+ </tr>
+</table>
+
+
+<p class="table_footnote">1 [<a href="http://developer.android.com/reference/android/view/KeyEvent.html">Resources, 72</a>]</p>
+
+<p class="table_footnote">2 The above HID usages must be declared within a Game pad CA (0x01 0x0005).</p>
+
+<p class="table_footnote">3 This usage must have a Logical Minimum of 0, a Logical Maximum of 7, a
+Physical Minimum of 0, a Physical Maximum of 315, Units in Degrees, and a
+Report Size of 4. The logical value is defined to be the clockwise rotation
+away from the vertical axis; for example, a logical value of 0 represents no
+rotation and the up button being pressed, while a logical value of 1 represents
+a rotation of 45 degrees and both the up and left keys being pressed.</p>
+
+<p class="table_footnote">4 [<a href="http://developer.android.com/reference/android/view/MotionEvent.html">Resources, 71</a>]</p>
+
+<table>
+ <tr>
+    <th>Analog Controls</strong><sup>1</sup></td>
+    <th>HID Usage</th>
+    <th>Android Button</th>
+ </tr>
+ <tr>
+    <td><a href="http://developer.android.com/reference/android/view/MotionEvent.html#AXIS_LTRIGGER">Left Trigger</a></td>
+    <td>0x02 0x00C5</td>
+    <td>AXIS_LTRIGGER </td>
+ </tr>
+ <tr>
+    <td><a href="http://developer.android.com/reference/android/view/MotionEvent.html#AXIS_THROTTLE">Right Trigger</a></td>
+    <td>0x02 0x00C4</td>
+    <td>AXIS_RTRIGGER </td>
+ </tr>
+ <tr>
+    <td><a href="http://developer.android.com/reference/android/view/MotionEvent.html#AXIS_Y">Left Joystick</a></td>
+    <td>0x01 0x0030</p>
+
+<p>0x01 0x0031</td>
+    <td>AXIS_X</p>
+
+<p>AXIS_Y</td>
+ </tr>
+ <tr>
+    <td><a href="http://developer.android.com/reference/android/view/MotionEvent.html#AXIS_Z">Right Joystick</a></td>
+    <td>0x01 0x0032</p>
+
+<p>0x01 0x0035</td>
+    <td>AXIS_Z</p>
+
+<p>AXIS_RZ</td>
+ </tr>
+</table>
+
+
+<p class="table_footnote">1 [<a href="http://developer.android.com/reference/android/view/MotionEvent.html">Resources, 71</a>]</p>
+
+<h3 id="7_2_7_remote_control">7.2.7. Remote Control</h3>
+
+
+<p>Android Television device implementations SHOULD provide a remote control to
+allow users to access the TV interface. The remote control MAY be a physical
+remote or can be a software-based remote that is accessible from a mobile phone
+or tablet. The remote control MUST meet the requirements defined below.</p>
+
+<ul>
+  <li><strong>Search affordance</strong>. Device implementations MUST fire KEYCODE_SEARCH when the user invokes voice search either on the physical or software-based remote.</li>
+  <li><strong>Navigation</strong>. All Android Television remotes MUST include Back, Home, and Select buttons and
+support for D-pad events [<a href="http://developer.android.com/reference/android/view/KeyEvent.html">Resources, 72</a>].</li>
+</ul>
+
+<h2 id="7_3_sensors">7.3. Sensors</h2>
+
+
+<p>Android includes APIs for accessing a variety of sensor types. Devices
+implementations generally MAY omit these sensors, as provided for in the
+following subsections. If a device includes a particular sensor type that has a
+corresponding API for third-party developers, the device implementation MUST
+implement that API as described in the Android SDK documentation and the
+Android Open Source documentation on sensors [<a href="http://source.android.com/devices/sensors/">Resources, 73</a>]. For example, device implementations:</p>
+
+<ul>
+  <li>MUST accurately report the presence or absence of sensors per the
+android.content.pm.PackageManager class [<a href="http://developer.android.com/reference/android/content/pm/PackageManager.html">Resources, 53]</a>.</li>
+  <li>MUST return an accurate list of supported sensors via the
+SensorManager.getSensorList() and similar methods.</li>
+  <li>MUST behave reasonably for all other sensor APIs (for example, by returning
+true or false as appropriate when applications attempt to register listeners,
+not calling sensor listeners when the corresponding sensors are not present;
+etc.).</li>
+  <li>MUST report all sensor measurements using the relevant International System of
+Units (metric) values for each sensor type as defined in the Android SDK
+documentation [<a href="http://developer.android.com/reference/android/hardware/SensorEvent.html">Resources, 74</a>].</li>
+  <li>SHOULD report the event time in nanoseconds as defined in the Android SDK
+documentation, representing the time the event happened and synchronized with
+the SystemClock.elapsedRealtimeNano() clock. Existing and new Android devices
+are <strong>very strongly encouraged</strong> to meet these requirement so they will be able to upgrade to the future
+platform releases where this might become a REQUIRED component. The
+synchronization error SHOULD be below 100 milliseconds [<a href="http://developer.android.com/reference/android/hardware/SensorEvent.html#timestamp">Resources, 75</a>].</li>
+</ul>
+
+<p>The list above is not comprehensive; the documented behavior of the Android SDK
+and the Android Open Source Documentations on Sensors [<a href="http://source.android.com/devices/sensors/">Resources, 73</a>] is to be considered authoritative.</p>
+
+<p>Some sensor types are composite, meaning they can be derived from data provided
+by one or more other sensors. (Examples include the orientation sensor, and the
+linear acceleration sensor.) Device implementations SHOULD implement these
+sensor types, when they include the prerequisite physical sensors as described
+in [<a href="https://source.android.com/devices/sensors/sensor-types.html">Resources, 76</a>].
+If a device implementation includes a composite sensor it MUST implement the
+sensor as described in the Android Open Source documentation on composite
+sensors [<a href="https://source.android.com/devices/sensors/sensor-types.html#composite_sensor_type_summary">Resources, 76</a>].</p>
+
+<p>Some Android sensors support a &ldquo;continuous&rdquo; trigger mode, which returns data
+continuously [<a href="https://source.android.com/devices/sensors/report-modes.html#continuous">Resources, 77</a>]. For any API indicated by the Android SDK documentation to be a continuous
+sensor, device implementations MUST continuously provide periodic data samples
+that SHOULD have a jitter below 3%, where jitter is defined as the standard
+deviation of the difference of the reported timestamp values between
+consecutive events.</p>
+
+<p>Note that the device implementations MUST ensure that the sensor event stream
+MUST NOT prevent the device CPU from entering a suspend state or waking up from
+a suspend state.</p>
+
+<p>Finally, when several sensors are activated, the power consumption SHOULD NOT
+exceed the sum of the individual sensor&rsquo;s reported power consumption.</p>
+
+<h3 id="7_3_1_accelerometer">7.3.1. Accelerometer</h3>
+
+
+<p>Device implementations SHOULD include a 3-axis accelerometer. Android Handheld
+devices and Android Watch devices are strongly encouraged to include this
+sensor. If a device implementation does include a 3-axis accelerometer, it:</p>
+
+<ul>
+  <li>MUST implement and report TYPE_ACCELEROMETER sensor [<a href="http://developer.android.com/reference/android/hardware/Sensor.html#TYPE_ACCELEROMETER">Resources, 78</a>].</li>
+  <li>MUST be able to report events up to a frequency of at least 50 Hz for
+  Android Watch devices as such devices have a stricter power constraint and
+  100 Hz for all other device types.</li>
+  <li>SHOULD report events up to at least 200 Hz.</li>
+  <li>MUST comply with the Android sensor coordinate system as detailed in the
+Android APIs [<a href="http://developer.android.com/reference/android/hardware/SensorEvent.html">Resources, 74</a>].</li>
+  <li>MUST be capable of measuring from freefall up to four times the gravity (4g) or
+more on any axis.</li>
+  <li>MUST have a resolution of at least 8-bits and SHOULD have a resolution of at
+least 16-bits.</li>
+  <li>SHOULD be calibrated while in use if the characteristics changes over the life
+cycle and compensated, and preserve the compensation parameters between device
+reboots.</li>
+  <li>SHOULD be temperature compensated.</li>
+  <li>MUST have a standard deviation no greater than 0.05 m/s^, where the standard
+deviation should be calculated on a per axis basis on samples collected over a
+period of at least 3 seconds at the fastest sampling rate.</li>
+  <li>SHOULD implement the TYPE_SIGNIFICANT_MOTION, TYPE_TILT_DETECTOR,
+TYPE_STEP_DETECTOR, TYPE_STEP_COUNTER composite sensors as described in the
+Android SDK document. Existing and new Android devices are <strong>very strongly encouraged</strong> to implement the TYPE_SIGNIFICANT_MOTION composite sensor. If any of these
+sensors are implemented, the sum of their power consumption MUST always be less
+than 4 mW and SHOULD each be below 2 mW and 0.5 mW for when the device is in a
+dynamic or static condition.</li>
+  <li>If a gyroscope sensor is included, MUST implement the TYPE_GRAVITY and
+TYPE_LINEAR_ACCELERATION composite sensors and SHOULD implement the
+TYPE_GAME_ROTATION_VECTOR composite sensor. Existing and new Android devices
+are strongly encouraged to implement the TYPE_GAME_ROTATION_VECTOR sensor.</li>
+  <li>SHOULD implement a TYPE_ROTATION_VECTOR composite sensor, if a gyroscope sensor
+and a magnetometer sensor is also included.</li>
+</ul>
+
+<h3 id="7_3_2_magnetometer">7.3.2. Magnetometer</h3>
+
+
+<p>Device implementations SHOULD include a 3-axis magnetometer (compass). If a
+device does include a 3-axis magnetometer, it:</p>
+
+<ul>
+  <li>MUST implement the TYPE_MAGNETIC_FIELD sensor and SHOULD also implement
+TYPE_MAGNETIC_FIELD_UNCALIBRATED sensor. Existing and new Android devices are
+strongly encouraged to implement the TYPE_MAGNETIC_FIELD_UNCALIBRATED sensor.</li>
+  <li>MUST be able to report events up to a frequency of at least 10 Hz and SHOULD
+report events up to at least 50 Hz.</li>
+  <li>MUST comply with the Android sensor coordinate system as detailed in the
+Android APIs [<a href="http://developer.android.com/reference/android/hardware/SensorEvent.html">Resources, 74</a>].</li>
+  <li>MUST be capable of measuring between -900 &micro;T and +900 &micro;T on each axis before
+saturating.</li>
+  <li>MUST have a hard iron offset value less than 700 &micro;T and SHOULD have a value
+below 200 &micro;T, by placing the magnetometer far from dynamic (current-induced)
+and static (magnet-induced) magnetic fields.</li>
+  <li>MUST have a resolution equal or denser than 0.6 &micro;T and SHOULD have a resolution
+equal or denser than 0.2 &micro;.</li>
+  <li>SHOULD be temperature compensated.</li>
+  <li>MUST support online calibration and compensation of the hard iron bias, and
+preserve the compensation parameters between device reboots.</li>
+  <li>MUST have the soft iron compensation applied&mdash;the calibration can be done either
+while in use or during the production of the device.</li>
+  <li>SHOULD have a standard deviation, calculated on a per axis basis on samples
+collected over a period of at least 3 seconds at the fastest sampling rate, no
+greater than 0.5 &micro;T.</li>
+  <li>SHOULD implement a TYPE_ROTATION_VECTOR composite sensor, if an accelerometer
+sensor and a gyroscope sensor is also included.</li>
+  <li>MAY implement the TYPE_GEOMAGNETIC_ROTATION_VECTOR sensor if an accelerometer
+sensor is also implemented. However if implemented, it MUST consume less than
+10 mW and SHOULD consume less than 3 mW when the sensor is registered for batch
+mode at 10 Hz.</li>
+</ul>
+
+<h3 id="7_3_3_gps">7.3.3. GPS</h3>
+
+
+<p>Device implementations SHOULD include a GPS receiver. If a device
+implementation does include a GPS receiver, it SHOULD include some form of&ldquo;assisted GPS&rdquo; technique to minimize GPS lock-on time.</p>
+
+<h3 id="7_3_4_gyroscope">7.3.4. Gyroscope</h3>
+
+
+<p>Device implementations SHOULD include a gyroscope (angular change sensor).
+Devices SHOULD NOT include a gyroscope sensor unless a 3-axis accelerometer is
+also included. If a device implementation includes a gyroscope, it:</p>
+
+<ul>
+  <li>MUST implement the TYPE_GYROSCOPE sensor and SHOULD also implement
+TYPE_GYROSCOPE_UNCALIBRATED sensor. Existing and new Android devices are
+strongly encouraged to implement the SENSOR_TYPE_GYROSCOPE_UNCALIBRATED sensor.</li>
+  <li>MUST be capable of measuring orientation changes up to 1,000 degrees per second.</li>
+  <li>MUST be able to report events up to a frequency of at least 50 Hz for
+  Android Watch devices as such devices have a stricter power constraint and 
+  100 Hz for all other device types.</li>
+  <li>SHOULD report events up to at least 200 Hz.</li>
+  <li>MUST have a resolution of 12-bits or more and SHOULD have a resolution of
+16-bits or more.</li>
+  <li>MUST be temperature compensated.</li>
+  <li>MUST be calibrated and compensated while in use, and preserve the compensation
+parameters between device reboots.</li>
+  <li>MUST have a variance no greater than 1e-7 rad^2 / s^2 per Hz (variance per Hz,
+or rad^2 / s). The variance is allowed to vary with the sampling rate, but must
+be constrained by this value. In other words, if you measure the variance of
+the gyro at 1 Hz sampling rate it should be no greater than 1e-7 rad^2/s^2.</li>
+  <li>SHOULD implement a TYPE_ROTATION_VECTOR composite sensor, if an accelerometer
+sensor and a magnetometer sensor is also included.</li>
+  <li>If an accelerometer sensor is included, MUST implement the TYPE_GRAVITY and
+TYPE_LINEAR_ACCELERATION composite sensors and SHOULD implement the
+TYPE_GAME_ROTATION_VECTOR composite sensor. Existing and new Android devices
+are strongly encouraged to implement the TYPE_GAME_ROTATION_VECTOR sensor.</li>
+</ul>
+
+<h3 id="7_3_5_barometer">7.3.5. Barometer</h3>
+
+
+<p>Device implementations SHOULD include a barometer (ambient air pressure
+sensor). If a device implementation includes a barometer, it:</p>
+
+<ul>
+  <li>MUST implement and report TYPE_PRESSURE sensor.</li>
+  <li>MUST be able to deliver events at 5 Hz or greater.</li>
+  <li>MUST have adequate precision to enable estimating altitude.</li>
+  <li>MUST be temperature compensated.</li>
+</ul>
+
+<h3 id="7_3_6_thermometer">7.3.6. Thermometer</h3>
+
+
+<p>Device implementations MAY include an ambient thermometer (temperature sensor).
+If present, it MUST be defined as SENSOR_TYPE_AMBIENT_TEMPERATURE and it MUST
+measure the ambient (room) temperature in degrees Celsius.</p>
+
+<p>Device implementations MAY but SHOULD NOT include a CPU temperature sensor. If
+present, it MUST be defined as SENSOR_TYPE_TEMPERATURE, it MUST measure the
+temperature of the device CPU, and it MUST NOT measure any other temperature.
+Note the SENSOR_TYPE_TEMPERATURE sensor type was deprecated in Android 4.0.</p>
+
+<h3 id="7_3_7_photometer">7.3.7. Photometer</h3>
+
+
+<p>Device implementations MAY include a photometer (ambient light sensor).</p>
+
+<h3 id="7_3_8_proximity_sensor">7.3.8. Proximity Sensor</h3>
+
+
+<p>Device implementations MAY include a proximity sensor. Devices that can make a
+voice call and indicate any value other than PHONE_TYPE_NONE in getPhoneType
+SHOULD include a proximity sensor. If a device implementation does include a
+proximity sensor, it:</p>
+
+<ul>
+  <li>MUST measure the proximity of an object in the same direction as the screen.
+That is, the proximity sensor MUST be oriented to detect objects close to the
+screen, as the primary intent of this sensor type is to detect a phone in use
+by the user. If a device implementation includes a proximity sensor with any
+other orientation, it MUST NOT be accessible through this API.</li>
+  <li>MUST have 1-bit of accuracy or more.</li>
+</ul>
+
+<h2 id="7_4_data_connectivity">7.4. Data Connectivity</h2>
+
+
+<h3 id="7_4_1_telephony">7.4.1. Telephony</h3>
+
+
+<p>&ldquo;Telephony&rdquo; as used by the Android APIs and this document refers specifically
+to hardware related to placing voice calls and sending SMS messages via a GSM
+or CDMA network. While these voice calls may or may not be packet-switched,
+they are for the purposes of Android considered independent of any data
+connectivity that may be implemented using the same network. In other words,
+the Android &ldquo;telephony&rdquo; functionality and APIs refer specifically to voice
+calls and SMS. For instance, device implementations that cannot place calls or
+send/receive SMS messages MUST NOT report the android.hardware.telephony
+feature or any subfeatures, regardless of whether they use a cellular network
+for data connectivity.</p>
+
+<p>Android MAY be used on devices that do not include telephony hardware. That is,
+Android is compatible with devices that are not phones. However, if a device
+implementation does include GSM or CDMA telephony, it MUST implement full
+support for the API for that technology. Device implementations that do not
+include telephony hardware MUST implement the full APIs as no-ops.</p>
+
+<h3 id="7_4_2_ieee_802_11_wi-fi">7.4.2. IEEE 802.11 (Wi-Fi)</h3>
+
+<div class="note">
+<p>Android Television device implementations MUST include Wi-Fi support.</p>
+</div>
+
+
+<p>Android Television device implementations MUST include support for one or more
+forms of 802.11 (b/g/a/n, etc.) and other types of Android device
+implementation SHOULD include support for one or more forms of 802.11. If a
+device implementation does include support for 802.11 and exposes the
+functionality to a third-party application, it MUST implement the corresponding
+Android API and:</p>
+
+<ul>
+  <li>MUST report the hardware feature flag android.hardware.wifi.</li>
+  <li>MUST implement the multicast API as described in the SDK documentation [<a href="http://developer.android.com/reference/android/net/wifi/WifiManager.MulticastLock.html">Resources, 79</a>].</li>
+  <li>MUST support multicast DNS (mDNS) and MUST NOT filter mDNS packets
+(224.0.0.251) at any time of operation including when the screen is not in an
+active state.</li>
+</ul>
+
+<h4 id="7_4_2_1_wi-fi_direct">7.4.2.1. Wi-Fi Direct</h4>
+
+
+<p>Device implementations SHOULD include support for Wi-Fi Direct (Wi-Fi
+peer-to-peer). If a device implementation does include support for Wi-Fi
+Direct, it MUST implement the corresponding Android API as described in the SDK
+documentation [<a href="http://developer.android.com/reference/android/net/wifi/p2p/WifiP2pManager.html">Resources, 80</a>]. If a device implementation includes support for Wi-Fi Direct, then it:</p>
+
+<ul>
+  <li>MUST report the hardware feature android.hardware.wifi.direct.</li>
+  <li>MUST support regular Wi-Fi operation.</li>
+  <li>SHOULD support concurrent Wi-Fi and Wi-Fi Direct operation.</li>
+</ul>
+
+<h4 id="7_4_2_2_wi-fi_tunneled_direct_link_setup">7.4.2.2. Wi-Fi Tunneled Direct Link Setup</h4>
+
+<div class="note">
+<p>Android Television device implementations MUST include support for Wi-Fi
+Tunneled Direct Link Setup (TDLS).</p>
+</div>
+
+
+<p>Android Television device implementations MUST include support for Wi-Fi
+Tunneled Direct Link Setup (TDLS) and other types of Android device
+implementations SHOULD include support for Wi-Fi TDLS as described in the
+Android SDK Documentation [<a href="http://developer.android.com/reference/android/net/wifi/WifiManager.html">Resources, 81</a>]. If a device implementation does include support for TDLS and TDLS is enabled
+by the WiFiManager API, the device:</p>
+
+<ul>
+  <li>SHOULD use TDLS only when it is possible AND beneficial.</li>
+  <li>SHOULD have some heuristic and NOT use TDLS when its performance might be worse
+than going through the Wi-Fi access point.</li>
+</ul>
+
+<h3 id="7_4_3_bluetooth">7.4.3. Bluetooth</h3>
+
+<div class="note">
+<p>Android Watch and Automotive implementations MUST support Bluetooth. Android
+Television implementations MUST support Bluetooth and Bluetooth LE.</p>
+</div>
+
+
+<p>Android includes support for Bluetooth and Bluetooth Low Energy [<a href="http://developer.android.com/reference/android/bluetooth/package-summary.html">Resources, 82</a>]. Device implementations that include support for Bluetooth and Bluetooth Low
+Energy MUST declare the relevant platform features (android.hardware.bluetooth
+and android.hardware.bluetooth_le respectively) and implement the platform
+APIs. Device implementations SHOULD implement relevant Bluetooth profiles such
+as A2DP, AVCP, OBEX, etc. as appropriate for the device. Android Television
+device implementations MUST support Bluetooth and Bluetooth LE. </p>
+
+<p>Device implementations including support for Bluetooth Low Energy:</p>
+
+<ul>
+  <li>MUST declare the hardware feature android.hardware.bluetooth_le.</li>
+  <li>MUST enable the GATT (generic attribute profile) based Bluetooth APIs as
+described in the SDK documentation and [<a href="http://developer.android.com/reference/android/bluetooth/package-summary.html">Resources, 82</a>].</li>
+  <li>SHOULD support offloading of the filtering logic to the bluetooth chipset when
+implementing the ScanFilter API [<a href="https://developer.android.com/reference/android/bluetooth/le/ScanFilter.html">Resources, 83</a>], and MUST report the correct value of where the filtering logic is implemented whenever queried via the
+android.bluetooth.BluetoothAdapter.isOffloadedFilteringSupported() method.</li>
+  <li>SHOULD support offloading of the batched scanning to the bluetooth chipset, but
+if not supported, MUST report &lsquo;false&rsquo; whenever queried via the
+android.bluetooth.BluetoothAdapater.isOffloadedScanBatchingSupported() method.</li>
+  <li>SHOULD support multi advertisement with at least 4 slots, but if not supported,
+MUST report &lsquo;false&rsquo; whenever queried via the
+android.bluetooth.BluetoothAdapter.isMultipleAdvertisementSupported() method.</li>
+</ul>
+
+<h3 id="7_4_4_near-field_communications">7.4.4. Near-Field Communications</h3>
+
+
+<p>Device implementations SHOULD include a transceiver and related hardware for
+Near-Field Communications (NFC). If a device implementation does include NFC
+hardware and plans to make it available to third-party apps, then it:</p>
+
+<ul>
+  <li>MUST report the android.hardware.nfc feature from the
+android.content.pm.PackageManager.hasSystemFeature() method [<a href="http://developer.android.com/reference/android/content/pm/PackageManager.html">Resources, 53</a>].</li>
+  <li>MUST be capable of reading and writing NDEF messages via the following NFC
+standards:
+  <ul>
+    <li>MUST be capable of acting as an NFC Forum reader/writer (as defined by the NFC
+Forum technical specification NFCForum-TS-DigitalProtocol-1.0) via the
+following NFC standards:
+    <ul>
+      <li>NfcA (ISO14443-3A)</li>
+      <li>NfcB (ISO14443-3B)</li>
+      <li>NfcF (JIS 6319-4)</li>
+      <li>IsoDep (ISO 14443-4)</li>
+      <li>NFC Forum Tag Types 1, 2, 3, 4 (defined by the NFC Forum)</li>
+    </ul>
+  <li>SHOULD be capable of reading and writing NDEF messages via the following NFC
+standards. Note that while the NFC standards below are stated as SHOULD, the
+Compatibility Definition for a future version is planned to change these to
+MUST. These standards are optional in this version but will be required in
+future versions. Existing and new devices that run this version of Android are <strong>very strongly encouraged</strong> to meet these requirements now so they will be able to upgrade to the future platform releases.</li>
+  <ul>
+    <li>NfcV (ISO 15693)</li>
+  </ul></li>
+  <li>MUST be capable of transmitting and receiving data via the following
+peer-to-peer standards and protocols:
+  <ul>
+    <li>ISO 18092</li>
+    <li>LLCP 1.0 (defined by the NFC Forum)</li>
+    <li>SDP 1.0 (defined by the NFC Forum)</li>
+    <li>NDEF Push Protocol [<a href="http://static.googleusercontent.com/media/source.android.com/en/us/compatibility/ndef-push-protocol.pdf">Resources, 84</a>]</li>
+    <li>SNEP 1.0 (defined by the NFC Forum)</li>
+  </ul></li>
+  <li>MUST include support for Android Beam [<a href="http://developer.android.com/guide/topics/connectivity/nfc/nfc.html">Resources, 85</a>]:
+  <ul>
+    <li>MUST implement the SNEP default server. Valid NDEF messages received by the
+default SNEP server MUST be dispatched to applications using the
+android.nfc.ACTION_NDEF_DISCOVERED intent. Disabling Android Beam in settings
+MUST NOT disable dispatch of incoming NDEF message.</li>
+    <li>MUST honor the android.settings.NFCSHARING_SETTINGS intent to show NFC sharing
+settings [<a href="http://developer.android.com/reference/android/provider/Settings.html#ACTION_NFCSHARING_SETTINGS">Resources, 86</a>].</li>
+    <li>MUST implement the NPP server. Messages received by the NPP server MUST be
+processed the same way as the SNEP default server.</li>
+    <li>MUST implement a SNEP client and attempt to send outbound P2P NDEF to the
+default SNEP server when Android Beam is enabled. If no default SNEP server is
+found then the client MUST attempt to send to an NPP server.</li>
+    <li>MUST allow foreground activities to set the outbound P2P NDEF message using
+android.nfc.NfcAdapter.setNdefPushMessage, and
+android.nfc.NfcAdapter.setNdefPushMessageCallback, and
+android.nfc.NfcAdapter.enableForegroundNdefPush.</li>
+    <li>SHOULD use a gesture or on-screen confirmation, such as 'Touch to Beam', before
+sending outbound P2P NDEF messages.</li>
+    <li>SHOULD enable Android Beam by default and MUST be able to send and receive
+using Android Beam, even when another proprietary NFC P2p mode is turned on.</li>
+    <li>MUST support NFC Connection handover to Bluetooth when the device supports
+Bluetooth Object Push Profile. Device implementations MUST support connection
+handover to Bluetooth when using android.nfc.NfcAdapter.setBeamPushUris, by
+implementing the &ldquo;Connection Handover version 1.2&rdquo; [<a href="http://members.nfc-forum.org/specs/spec_list/#conn_handover">Resources, 87</a>] and &ldquo;Bluetooth Secure Simple Pairing Using NFC version 1.0&rdquo; [<a href="http://members.nfc-forum.org/apps/group_public/download.php/18688/NFCForum-AD-BTSSP_1_1.pdf">Resources, 88</a>] specs from the NFC Forum. Such an implementation MUST implement the handover
+LLCP service with service name &ldquo;urn:nfc:sn:handover&rdquo; for exchanging the
+handover request/select records over NFC, and it MUST use the Bluetooth Object
+Push Profile for the actual Bluetooth data transfer. For legacy reasons (to
+remain compatible with Android 4.1 devices), the implementation SHOULD still
+accept SNEP GET requests for exchanging the handover request/select records
+over NFC. However an implementation itself SHOULD NOT send SNEP GET requests
+for performing connection handover.</li>
+  </ul></li>
+  <li>MUST poll for all supported technologies while in NFC discovery mode.</li>
+  <li>SHOULD be in NFC discovery mode while the device is awake with the screen
+active and the lock-screen unlocked.</li>
+</ul>
+</ul>
+
+<p>(Note that publicly available links are not available for the JIS, ISO, and NFC
+Forum specifications cited above.)</p>
+
+<p>Android includes support for NFC Host Card Emulation (HCE) mode. If a
+device implementation does include an NFC controller chipset capable of HCE and
+Application ID (AID) routing, then it:</p>
+
+<ul>
+  <li>MUST report the android.hardware.nfc.hce feature constant.</li>
+  <li>MUST support NFC HCE APIs as defined in the Android SDK [<a href="http://developer.android.com/guide/topics/connectivity/nfc/hce.html">Resources, 10</a>].</li>
+</ul>
+
+<p>Additionally, device implementations MAY include reader/writer support for the
+following MIFARE technologies.</p>
+
+<ul>
+  <li>MIFARE Classic</li>
+  <li>MIFARE Ultralight</li>
+  <li>NDEF on MIFARE Classic</li>
+</ul>
+
+<p>Note that Android includes APIs for these MIFARE types. If a device
+implementation supports MIFARE in the reader/writer role, it:</p>
+
+<ul>
+  <li>MUST implement the corresponding Android APIs as documented by the Android SDK.</li>
+  <li>MUST report the feature com.nxp.mifare from the
+android.content.pm.PackageManager.hasSystemFeature() meth<a href="http://developer.android.com/reference/android/content/pm/PackageManager.html">od [Resources, 53]</a>. Note that this is not a standard Android feature and as such does not appear
+as a constant on the PackageManager class.</li>
+  <li>MUST NOT implement the corresponding Android APIs nor report the com.nxp.mifare
+feature unless it also implements general NFC support as described in this
+section.</li>
+</ul>
+
+<p>If a device implementation does not include NFC hardware, it MUST NOT declare
+the android.hardware.nfc feature from the
+android.content.pm.PackageManager.hasSystemFeature() method [<a href="http://developer.android.com/reference/android/content/pm/PackageManager.html">Resources, 53]</a>, and MUST implement the Android NFC API as a no-op.</p>
+
+<p>As the classes android.nfc.NdefMessage and android.nfc.NdefRecord represent a
+protocol-independent data representation format, device implementations MUST
+implement these APIs even if they do not include support for NFC or declare the
+android.hardware.nfc feature.</p>
+
+<h3 id="7_4_5_minimum_network_capability">7.4.5. Minimum Network Capability</h3>
+
+
+<p>Device implementations MUST include support for one or more forms of data
+networking. Specifically, device implementations MUST include support for at
+least one data standard capable of 200Kbit/sec or greater. Examples of
+technologies that satisfy this requirement include EDGE, HSPA, EV-DO, 802.11g,
+Ethernet, Bluetooth PAN, etc.</p>
+
+<p>Device implementations where a physical networking standard (such as Ethernet)
+is the primary data connection SHOULD also include support for at least one
+common wireless data standard, such as 802.11 (Wi-Fi).</p>
+
+<p>Devices MAY implement more than one form of data connectivity.</p>
+
+<h3 id="7_4_6_sync_settings">7.4.6. Sync Settings</h3>
+
+
+<p>Device implementations MUST have the master auto-sync setting on by default so
+that the method getMasterSyncAutomatically() returns &ldquo;true&rdquo; [<a href="http://developer.android.com/reference/android/content/ContentResolver.html">Resources, 89</a>].</p>
+
+<h2 id="7_5_cameras">7.5. Cameras</h2>
+
+
+<p>Device implementations SHOULD include a rear-facing camera and MAY include a
+front-facing camera. A rear-facing camera is a camera located on the side of
+the device opposite the display; that is, it images scenes on the far side of
+the device, like a traditional camera. A front-facing camera is a camera
+located on the same side of the device as the display; that is, a camera
+typically used to image the user, such as for video conferencing and similar
+applications.</p>
+
+<p>If a device implementation includes at least one camera, it SHOULD be possible
+for an application to simultaneously allocate 3 bitmaps equal to the size of
+the images produced by the largest-resolution camera sensor on the device.</p>
+
+<h3 id="7_5_1_rear-facing_camera">7.5.1. Rear-Facing Camera</h3>
+
+
+<p>Device implementations SHOULD include a rear-facing camera. If a device
+implementation includes at least one rear-facing camera, it:</p>
+
+<ul>
+  <li>MUST report the feature flag android.hardware.camera and
+android.hardware.camera.any.</li>
+  <li>MUST have a resolution of at least 2 megapixels.</li>
+  <li>SHOULD have either hardware auto-focus or software auto-focus implemented in
+the camera driver (transparent to application software).</li>
+  <li>MAY have fixed-focus or EDOF (extended depth of field) hardware.</li>
+  <li>MAY include a flash. If the Camera includes a flash, the flash lamp MUST NOT be
+lit while an android.hardware.Camera.PreviewCallback instance has been
+registered on a Camera preview surface, unless the application has explicitly
+enabled the flash by enabling the FLASH_MODE_AUTO or FLASH_MODE_ON attributes
+of a Camera.Parameters object. Note that this constraint does not apply to the
+device&rsquo;s built-in system camera application, but only to third-party
+applications using Camera.PreviewCallback.</li>
+</ul>
+
+<h3 id="7_5_2_front-facing_camera">7.5.2. Front-Facing Camera</h3>
+
+
+<p>Device implementations MAY include a front-facing camera. If a device
+implementation includes at least one front-facing camera, it:</p>
+
+<ul>
+  <li>MUST report the feature flag android.hardware.camera.any and
+android.hardware.camera.front.</li>
+  <li>MUST have a resolution of at least VGA (640x480 pixels).</li>
+  <li>MUST NOT use a front-facing camera as the default for the Camera API. The
+camera API in Android has specific support for front-facing cameras and device
+implementations MUST NOT configure the API to to treat a front-facing camera as
+the default rear-facing camera, even if it is the only camera on the device.</li>
+  <li>MAY include features (such as auto-focus, flash, etc.) available to rear-facing
+cameras as described in <a href="#7_5_1_rear-facing_camera">section 7.5.1</a>.</li>
+  <li>MUST horizontally reflect (i.e. mirror) the stream displayed by an app in a
+CameraPreview, as follows:
+  <ul>
+    <li>If the device implementation is capable of being rotated by user (such as
+automatically via an accelerometer or manually via user input), the camera
+preview MUST be mirrored horizontally relative to the device&rsquo;s current
+orientation.</li>
+    <li>If the current application has explicitly requested that the Camera display be
+rotated via a call to the android.hardware.Camera.setDisplayOrientation()[<a href="http://developer.android.com/reference/android/hardware/Camera.html#setDisplayOrientation(int)">Resources, 90</a>] method, the camera preview MUST be mirrored horizontally relative to the
+orientation specified by the application.</li>
+    <li>Otherwise, the preview MUST be mirrored along the device&rsquo;s default horizontal
+axis.</li>
+  </ul></li>
+  <li>MUST mirror the image displayed by the postview in the same manner as the
+camera preview image stream. If the device implementation does not support
+postview, this requirement obviously does not apply.</li>
+  <li>MUST NOT mirror the final captured still image or video streams returned to
+application callbacks or committed to media storage.</li>
+</ul>
+
+<h3 id="7_5_3_external_camera">7.5.3. External Camera</h3>
+
+
+<p>Device implementations with USB host mode MAY include support for an external
+camera that connects to the USB port. If a device includes support for an
+external camera, it:</p>
+
+<ul>
+  <li>MUST declare the platform feature android.hardware.camera.external and
+android.hardware camera.any.</li>
+  <li>MUST support USB Video Class (UVC 1.0 or higher).</li>
+  <li>MAY support multiple cameras.</li>
+</ul>
+
+<p>Video compression (such as MJPEG) support is RECOMMENDED to enable transfer of
+high-quality unencoded streams (i.e. raw or independently compressed picture
+streams). Camera-based video encoding MAY be supported. If so, a simultaneous
+unencoded/ MJPEG stream (QVGA or greater resolution) MUST be accessible to the
+device implementation.</p>
+
+<h3 id="7_5_4_camera_api_behavior">7.5.4. Camera API Behavior</h3>
+
+
+<p>Android includes two API packages to access the camera, the newer
+android.hardware.camera2 API expose lower-level camera control to the app,
+including efficient zero-copy burst/streaming flows and per-frame controls of
+exposure, gain, white balance gains, color conversion, denoising, sharpening,
+and more.</p>
+
+<p>The older API package, android.hardware.Camera, is marked as deprecated in
+Android 5.0 but as it should still be available for apps to use Android device
+implementations MUST ensure the continued support of the API as described in
+this section and in the Android SDK.</p>
+
+<p>Device implementations MUST implement the following behaviors for the
+camera-related APIs, for all available cameras:</p>
+
+<ul>
+  <li>If an application has never called
+android.hardware.Camera.Parameters.setPreviewFormat(int), then the device MUST
+use android.hardware.PixelFormat.YCbCr_420_SP for preview data provided to
+application callbacks.</li>
+  <li>If an application registers an android.hardware.Camera.PreviewCallback instance
+and the system calls the onPreviewFrame() method when the preview format is
+YCbCr_420_SP, the data in the byte[] passed into onPreviewFrame() must further
+be in the NV21 encoding format. That is, NV21 MUST be the default.</li>
+  <li>For android.hardware.Camera, device implementations MUST support the YV12
+format (as denoted by the android.graphics.ImageFormat.YV12 constant) for
+camera previews for both front- and rear-facing cameras. (The hardware video
+encoder and camera may use any native pixel format, but the device
+implementation MUST support conversion to YV12.)</li>
+  <li>For android.hardware.camera2, device implementations must support the
+android.hardware.ImageFormat.YUV_420_888 and android.hardware.ImageFormat.JPEG
+formats as outputs through the android.media.ImageReader API.</li>
+</ul>
+
+<p>Device implementations MUST still implement the full Camera API included in the
+Android SDK documentation [<a href="http://developer.android.com/reference/android/hardware/Camera.html">Resources, 91</a>], regardless of whether the device includes hardware autofocus or other
+capabilities. For instance, cameras that lack autofocus MUST still call any
+registered android.hardware.Camera.AutoFocusCallback instances (even though
+this has no relevance to a non-autofocus camera.) Note that this does apply to
+front-facing cameras; for instance, even though most front-facing cameras do
+not support autofocus, the API callbacks must still be &ldquo;faked&rdquo; as described.</p>
+
+<p>Device implementations MUST recognize and honor each parameter name defined as
+a constant on the android.hardware.Camera.Parameters class, if the underlying
+hardware supports the feature. If the device hardware does not support a
+feature, the API must behave as documented. Conversely, device implementations
+MUST NOT honor or recognize string constants passed to the
+android.hardware.Camera.setParameters() method other than those documented as
+constants on the android.hardware.Camera.Parameters. That is, device
+implementations MUST support all standard Camera parameters if the hardware
+allows, and MUST NOT support custom Camera parameter types. For instance,
+device implementations that support image capture using high dynamic range
+(HDR) imaging techniques MUST support camera parameter Camera.SCENE_MODE_HDR [<a href="http://developer.android.com/reference/android/hardware/Camera.Parameters.html">Resources, 92</a>].</p>
+
+<p>Because not all device implementations can fully support all the features of
+the android.hardware.camera2 API, device implementations MUST report the proper
+level of support with the android.info.supportedHardwareLevel property as
+described in the Android SDK [<a href="https://developer.android.com/reference/android/hardware/camera2/CameraCharacteristics.html#INFO_SUPPORTED_HARDWARE_LEVEL">Resources, 93]</a> and report the appropriate framework feature flags [<a href="http://source.android.com/devices/camera/versioning.html">Resources, 94]</a>. </p>
+
+<p>Device implementations MUST also declare its Individual camera capabilities of
+android.hardware.camera2 via the android.request.availableCapabilities property
+and declare the appropriate feature flags [<a href="http://source.android.com/devices/camera/versioning.html">Resources, 94]</a>; a device must define the feature flag if any of its attached camera devices supports the feature.</p>
+
+<p>Device implementations MUST broadcast the Camera.ACTION_NEW_PICTURE intent
+whenever a new picture is taken by the camera and the entry of the picture has
+been added to the media store.</p>
+
+<p>Device implementations MUST broadcast the Camera.ACTION_NEW_VIDEO intent
+whenever a new video is recorded by the camera and the entry of the picture has
+been added to the media store.</p>
+
+<h3 id="7_5_5_camera_orientation">7.5.5. Camera Orientation</h3>
+
+
+<p>Both front- and rear-facing cameras, if present, MUST be oriented so that the
+long dimension of the camera aligns with the screen&rsquo;s long dimension. That is,
+when the device is held in the landscape orientation, cameras MUST capture
+images in the landscape orientation. This applies regardless of the device&rsquo;s
+natural orientation; that is, it applies to landscape-primary devices as well
+as portrait-primary devices.</p>
+
+<h2 id="7_6_memory_and_storage">7.6. Memory and Storage</h2>
+
+
+<h3 id="7_6_1_minimum_memory_and_storage">7.6.1. Minimum Memory and Storage</h3>
+
+<div class="note">
+<p>Android Television devices MUST have at least 5GB of non-volatile storage
+available for application private data.</p>
+</div>
+
+
+<p>The memory available to the kernel and userspace on device implementations MUST
+be at least equal or larger than the minimum values specified by the following
+table. (See <a href="#7_1_1_screen_configuration">section 7.1.1</a> for screen size and density definitions.)</p>
+<table>
+ <tr>
+    <th>Density and screen size</th>
+    <th>32-bit device</th>
+    <th>64-bit device</th>
+ </tr>
+ <tr>
+    <td>Android Watch devices (due to smaller screens)</td>
+    <td>416MB</td>
+    <td>Not applicable</td>
+ </tr>
+ <tr>
+    <td><ul>
+    <li class="table_list">hdpi or lower on small/normal screens</li>
+    <li class="table_list">mdpi or lower on large screens</li>
+    <li class="table_list">ldpi or lower on extra large screens</li>
+    </ul></td>
+    <td>424MB</td>
+    <td>Not applicable</td>
+ </tr>
+ <tr>
+    <td><ul>
+    <li class="table_list">xhdpi or higher on small/normal screens</li>
+    <li class="table_list">hdpi or higher on large screens</li>
+    <li class="table_list">mdpi or higher on extra large screens</li></ul></td>
+    <td>512MB</td>
+    <td>832MB</td>
+ </tr>
+ <tr>
+    <td><ul>
+    <li class="table_list">400dpi or higher on small/normal screens</li>
+    <li class="table_list">xhdpi or higher on large screens</li>
+     <li class="table_list">tvdpi or higher on extra large screens</li></ul></td>
+    <td>896MB</td>
+    <td>1280MB</td>
+ </tr>
+ <tr>
+    <td><ul>
+    <li class="table_list">560dpi or higher on small/normal screens</li>
+    <li class="table_list">400dpi or higher on large screens</li>
+    <li class="table_list">xhdpi or higher on extra large screens</li></ul></td>
+    <td>1344MB</td>
+    <td>1824MB</td>
+ </tr>
+</table>
+
+
+<p>The minimum memory values MUST be in addition to any memory space already
+dedicated to hardware components such as radio, video, and so on that is not
+under the kernel&rsquo;s control.</p>
+
+<p>Device implementations with less than 512MB of memory available to the kernel
+and userspace, unless an Android Watch, MUST return the value "true" for
+ActivityManager.isLowRamDevice().</p>
+
+<p>Android Television devices MUST have at least 5GB and other device
+implementations MUST have at least 1.5GB of non-volatile storage available for
+application private data. That is, the /data partition MUST be at least 5GB for
+Android Television devices and at least 1.5GB for other device implementations.
+Device implementations that run Android are <strong>very strongly encouraged</strong> to have at least 3GB of non-volatile storage for application private data so
+they will be able to upgrade to the future platform releases.</p>
+
+<p>The Android APIs include a Download Manager that applications MAY use to
+download data files [<a href="http://developer.android.com/reference/android/app/DownloadManager.html">Resources, 95</a>]. The device implementation of the Download Manager MUST be capable of
+downloading individual files of at least 100MB in size to the default &ldquo;cache"
+location.</p>
+
+<h3 id="7_6_2_application_shared_storage">7.6.2. Application Shared Storage</h3>
+
+
+<p>Device implementations MUST offer shared storage for applications also often
+referred as &ldquo;shared external storage&rdquo;. </p>
+
+<p>Device implementations MUST be configured with shared storage mounted by
+default, &ldquo;out of the box&rdquo;. If the shared storage is not mounted on the Linux
+path /sdcard, then the device MUST include a Linux symbolic link from /sdcard
+to the actual mount point.</p>
+
+<p>Device implementations MAY have hardware for user-accessible removable storage,
+such as a Secure Digital (SD) card slot. If this slot is used to satisfy the
+shared storage requirement, the device implementation:</p>
+
+<ul>
+  <li>MUST implement a toast or pop-up user interface warning the user when there is
+no SD card.</li>
+  <li>MUST include a FAT-formatted SD card 1GB in size or larger OR show on the box
+and other material available at time of purchase that the SD card has to be
+separately purchased.</li>
+  <li>MUST mount the SD card by default.</li>
+</ul>
+
+<p>Alternatively, device implementations MAY allocate internal (non-removable)
+storage as shared storage for apps as included in the upstream Android Open
+Source Project; device implementations SHOULD use this configuration and
+software implementation. If a device implementation uses internal
+(non-removable) storage to satisfy the shared storage requirement, that storage
+MUST be 1GB in size or larger and mounted on /sdcard (or /sdcard MUST be a
+symbolic link to the physical location if it is mounted elsewhere).</p>
+
+<p>Device implementations MUST enforce as documented the
+android.permission.WRITE_EXTERNAL_STORAGE permission on this shared storage.
+Shared storage MUST otherwise be writable by any application that obtains that
+permission.</p>
+
+<p>Device implementations that include multiple shared storage paths (such as both
+an SD card slot and shared internal storage) MUST NOT allow Android
+applications to write to the secondary external storage, except for their
+package-specific directories on the secondary external storage, but SHOULD
+expose content from both storage paths transparently through Android&rsquo;s media
+scanner service and android.provider.MediaStore.</p>
+
+<p>Regardless of the form of shared storage used, if the device implementation
+has a USB port with USB peripheral mode support, it MUST provide some mechanism
+to access the contents of shared storage from a host computer. Device
+implementations MAY use USB mass storage, but SHOULD use Media Transfer Protocol
+to satisfy this requirement. If the device implementation supports Media
+Transfer Protocol, it:</p>
+
+<ul>
+  <li>SHOULD be compatible with the reference Android MTP host, Android File Transfer
+[<a href="http://www.android.com/filetransfer">Resources, 96</a>].</li>
+  <li>SHOULD report a USB device class of 0x00.</li>
+  <li>SHOULD report a USB interface name of 'MTP'.</li>
+</ul>
+
+<h2 id="7_7_usb">7.7. USB</h2>
+
+
+<p>Device implementations SHOULD support USB peripheral mode and SHOULD support
+USB host mode.</p>
+
+<p>If a device implementation includes a USB port supporting peripheral mode:</p>
+
+<ul>
+  <li>The port MUST be connectable to a USB host that has a standard type-A or type
+-C USB port.</li>
+  <li>The port SHOULD use micro-A, micro-AB or type-C USB form factor. Existing and
+new Android devices are <strong>very strongly encouraged to meet these requirements</strong> so they will be able to upgrade to the future platform releases.</li>
+  <li>The port SHOULD be centered in the middle of an edge. Device implementations
+SHOULD either locate the port on the bottom of the device (according to natural
+orientation) or enable software screen rotation for all apps (including home
+screen), so that the display draws correctly when the device is oriented with
+the port at bottom. Existing and new Android devices are <strong>very strongly encouraged to meet these requirements</strong> so they will be able to upgrade to future platform releases.</li>
+  <li>It MUST allow a USB host connected with the Android device to access the
+contents of the shared storage volume using either USB mass storage or Media
+Transfer Protocol.</li>
+  <li>It SHOULD implement the Android Open Accessory (AOA) API and specification as
+documented in the Android SDK documentation, and if it is an Android Handheld
+device it MUST implement the AOA API. Device implementations implementing the
+AOA specification:
+  <ul>
+    <li>MUST declare support for the hardware feature android.hardware.usb.accessory [<a href="http://developer.android.com/guide/topics/connectivity/usb/accessory.html">Resources, 97</a>].</li>
+    <li>MUST implement the USB audio class as documented in the Android SDK
+documentation [<a href="http://developer.android.com/reference/android/hardware/usb/UsbConstants.html#USB_CLASS_AUDIO">Resources, 98</a>].</li>
+  </ul></li>
+  <li>It SHOULD implement support to draw 1.5 A current during HS chirp and traffic
+as specified in the USB battery charging specification [<a href="http://www.usb.org/developers/docs/devclass_docs/USB_Battery_Charging_1.2.pdf">Resources, 99</a>]. Existing and new Android devices are <strong>very strongly encouraged to meet these requirements</strong> so they will be able to upgrade to the future platform releases.</li>
+  <li>The value of iSerialNumber in USB standard device descriptor MUST be equal to
+the value of android.os.Build.SERIAL.</li>
+</ul>
+
+<p>If a device implementation includes a USB port supporting host mode, it:</p>
+
+<ul>
+  <li>SHOULD use a type-C USB port, if the device implementation supports USB 3.1.</li>
+  <li>MAY use a non-standard port form factor, but if so MUST ship with a cable or
+cables adapting the port to a standard type-A or type-C USB port.</li>
+  <li>MAY use a micro-AB USB port, but if so SHOULD ship with a cable or cables
+adapting the port to a standard type-A or type-C USB port.</li>
+  <li>is <strong>very strongly RECOMMENDED</strong> to implement the USB audio class as documented in the Android SDK
+documentation [<a href="http://developer.android.com/reference/android/hardware/usb/UsbConstants.html#USB_CLASS_AUDIO">Resources, 98</a>].</li>
+  <li>MUST implement the Android USB host API as documented in the Android SDK, and
+MUST declare support for the hardware feature android.hardware.usb.host [<a href="http://developer.android.com/guide/topics/connectivity/usb/host.html">Resources, 100</a>].</li>
+  <li>SHOULD support the Charging Downstream Port output current range of 1.5 A ~ 5 A
+as specified in the USB Battery Charging Specifications [<a href="http://www.usb.org/developers/docs/devclass_docs/USB_Battery_Charging_1.2.pdf">Resources, 99</a>].</li>
+</ul>
+
+<h2 id="7_8_audio">7.8. Audio</h2>
+
+
+<h3 id="7_8_1_microphone">7.8.1. Microphone</h3>
+
+<div class="note">
+<p>Android Handheld, Watch, and Automotive implementations MUST include a
+microphone.</p>
+</div>
+
+
+<p>Device implementations MAY omit a microphone. However, if a device
+implementation omits a microphone, it MUST NOT report the
+android.hardware.microphone feature constant, and MUST implement the audio
+recording API at least as no-ops, per <a href="#7_hardware_compatibility">section 7</a>. Conversely, device implementations that do possess a microphone:</p>
+
+<ul>
+  <li>MUST report the android.hardware.microphone feature constant
+  <li>MUST meet the audio recording requirements in <a href="#5_4_audio_recording">section 5.4</a>
+  <li>MUST meet the audio latency requirements in <a href="#5_6_audio_latency">section 5.6</a>
+</ul>
+
+<h3 id="7_8_2_audio_output">7.8.2. Audio Output</h3>
+
+<div class="note">
+<p>Android Watch devices MAY include an audio output.</p>
+</div>
+
+<p>Device implementations including a speaker or with an audio/multimedia output
+port for an audio output peripheral as a headset or an external speaker:</p>
+
+<ul>
+  <li>MUST report the android.hardware.audio.output feature constant.</li>
+  <li>MUST meet the audio playback requirements in <a href="#5_5_audio_playback">section 5.5</a>.</li>
+  <li>MUST meet the audio latency requirements in <a href="#5_6_audio_latency">section 5.6</a>.</li>
+</ul>
+
+<p>Conversely, if a device implementation does not include a speaker or audio
+output port, it MUST NOT report the android.hardware.audio output feature, and
+MUST implement the Audio Output related APIs as no-ops at least. </p>
+
+<p>Android Watch device implementation MAY but SHOULD NOT have audio output, but
+other types of Android device implementations MUST have an audio output and
+declare android.hardware.audio.output.</p>
+
+<h4 id="7_8_2_1_analog_audio_ports">7.8.2.1. Analog Audio Ports</h4>
+
+
+<p>In order to be compatible with the headsets and other audio accessories using
+the 3.5mm audio plug across the Android ecosystem [<a href="http://source.android.com/accessories/headset-spec.html">Resources, 101</a>], if a device implementation includes one or more analog audio ports, at least
+one of the audio port(s) SHOULD be a 4 conductor 3.5mm audio jack. If a device
+implementation has a 4 conductor 3.5mm audio jack, it:</p>
+
+<ul>
+  <li>MUST support audio playback to stereo headphones and stereo headsets with a
+microphone, and SHOULD support audio recording from stereo headsets with a
+microphone.</li>
+  <li>MUST support TRRS audio plugs with the CTIA pin-out order, and SHOULD support
+audio plugs with the OMTP pin-out order.</li>
+  <li>MUST support the detection of microphone on the plugged in audio accessory, if
+the device implementation supports a microphone, and broadcast the
+android.intent.action.HEADSET_PLUG with the extra value microphone set as 1.</li>
+  <li>SHOULD support the detection and mapping to the keycodes for the following 3
+ranges of equivalent impedance between the microphone and ground conductors on
+the audio plug:
+  <ul>
+    <li><strong>70 ohm or less</strong>: KEYCODE_HEADSETHOOK</li>
+    <li><strong>210&#45;290 Ohm</strong>:<strong> </strong>KEYCODE_VOLUME_UP</li>
+    <li><strong>360&#45;680 Ohm</strong>: KEYCODE_VOLUME_DOWN</li>
+  </ul></li>
+  <li>SHOULD support the detection and mapping to the keycode for the following range
+of equivalent impedance between the microphone and ground conductors on the
+audio plug:
+  <ul>
+    <li><strong>110&#45;180 Ohm: </strong>KEYCODE_VOICE_ASSIST</li>
+  </ul></li>
+  <li>MUST trigger ACTION_HEADSET_PLUG upon a plug insert, but only after all
+contacts on plug are touching their relevant segments on the jack.</li>
+  <li>MUST be capable of driving at least 150mV +/- 10% of output voltage on a 32 Ohm
+speaker impedance.</li>
+  <li>MUST have a microphone bias voltage between 1.8V ~ 2.9V.</li>
+</ul>
+
+<h1 id="8_performance_compatibility">8. Performance Compatibility</h1>
+
+
+<p>Some minimum performance criterias are critical to the user experience and
+impacts the baseline assumptions developers would have when developing an app.
+Android Watch devices SHOULD and other type of device implementations MUST meet
+the following criteria:</p>
+
+<h2 id="8_1_user_experience_consistency">8.1. User Experience Consistency</h2>
+
+
+<p>Device implementations MUST provide a smooth user interface by ensuring a
+consistent frame rate and response times for applications and games. Device
+implementations MUST meet the following requirements: </p>
+
+<ul>
+  <li><strong>Consistent frame latency</strong>. Inconsistent frame latency or a delay to render frames MUST NOT happen more
+often than 5 frames in a second, and SHOULD be below 1 frames in a second.</li>
+  <li><strong>User interface latency</strong>. Device implementations MUST ensure low latency user experience by scrolling a
+list of 10K list entries as defined by the Android Compatibility Test Suite
+(CTS) in less than 36 secs.</li>
+  <li><strong>Task switching</strong>. When multiple applications have been launched, re-launching an already-running
+application after it has been launched MUST take less than 1 second.</li>
+</ul>
+
+<h2 id="8_2_file_i_o_access_performance">8.2. File I/O Access Performance</h2>
+
+
+<p>Device implementations MUST ensure internal storage file access performance consistency for read
+and write operations. </p>
+
+<ul>
+  <li><strong>Sequential write</strong>. Device implementations MUST ensure a sequential write performance of at least 5MB/s
+for a 256MB file using 10MB write buffer.</li>
+  <li><strong>Random write</strong>. Device implementations MUST ensure a random write performance of at least 0.5MB/s for a
+256MB file using 4KB write buffer.</li>
+  <li><strong>Sequential read</strong>. Device implementations MUST ensure a sequential read performance of at least 15MB/s for
+a 256MB file using 10MB write buffer.</li>
+  <li><strong>Random read</strong>. Device implementations MUST ensure a random read performance of at least 3.5MB/s for a
+256MB file using 4KB write buffer.</li>
+</ul>
+
+<h1 id="9_security_model_compatibility">9. Security Model Compatibility</h1>
+
+
+<p>Device implementations MUST implement a security model consistent with the
+Android platform security model as defined in Security and Permissions
+reference document in the APIs [<a href="http://developer.android.com/guide/topics/security/permissions.html">Resources, 102</a>] in the Android developer documentation. Device implementations MUST support
+installation of self-signed applications without requiring any additional
+permissions/certificates from any third parties/authorities. Specifically,
+compatible devices MUST support the security mechanisms described in the follow
+subsections.</p>
+
+<h2 id="9_1_permissions">9.1. Permissions</h2>
+
+
+<p>Device implementations MUST support the Android permissions model as defined in
+the Android developer documentation [<a href="http://developer.android.com/guide/topics/security/permissions.html">Resources, 102</a>]. Specifically, implementations MUST enforce each permission defined as
+described in the SDK documentation; no permissions may be omitted, altered, or
+ignored. Implementations MAY add additional permissions, provided the new
+permission ID strings are not in the android.* namespace.</p>
+
+<h2 id="9_2_uid_and_process_isolation">9.2. UID and Process Isolation</h2>
+
+
+<p>Device implementations MUST support the Android application sandbox model, in
+which each application runs as a unique Unixstyle UID and in a separate
+process. Device implementations MUST support running multiple applications as
+the same Linux user ID, provided that the applications are properly signed and
+constructed, as defined in the Security and Permissions reference [<a href="http://developer.android.com/guide/topics/security/permissions.html">Resources, 102</a>].</p>
+
+<h2 id="9_3_filesystem_permissions">9.3. Filesystem Permissions</h2>
+
+
+<p>Device implementations MUST support the Android file access permissions model
+as defined in the Security and Permissions reference [<a href="http://developer.android.com/guide/topics/security/permissions.html">Resources, 102</a>].</p>
+
+<h2 id="9_4_alternate_execution_environments">9.4. Alternate Execution Environments</h2>
+
+
+<p>Device implementations MAY include runtime environments that execute
+applications using some other software or technology than the Dalvik Executable
+Format or native code. However, such alternate execution environments MUST NOT
+compromise the Android security model or the security of installed Android
+applications, as described in this section.</p>
+
+<p>Alternate runtimes MUST themselves be Android applications, and abide by the
+standard Android security model, as described elsewhere in <a href="#9_security_model_compatibility">section 9</a>.</p>
+
+<p>Alternate runtimes MUST NOT be granted access to resources protected by
+permissions not requested in the runtime&rsquo;s AndroidManifest.xml file via the
+<uses-permission> mechanism.</p>
+
+<p>Alternate runtimes MUST NOT permit applications to make use of features
+protected by Android permissions restricted to system applications.</p>
+
+<p>Alternate runtimes MUST abide by the Android sandbox model. Specifically,
+alternate runtimes:</p>
+
+<ul>
+  <li>SHOULD install apps via the PackageManager into separate Android sandboxes (
+Linux user IDs, etc.).</li>
+  <li>MAY provide a single Android sandbox shared by all applications using the
+alternate runtime.</li>
+  <li>and installed applications using an alternate runtime, MUST NOT reuse the
+sandbox of any other app installed on the device, except through the standard
+Android mechanisms of shared user ID and signing certificate.</li>
+  <li>MUST NOT launch with, grant, or be granted access to the sandboxes
+corresponding to other Android applications.</li>
+  <li>MUST NOT be launched with, be granted, or grant to other applications any
+privileges of the superuser (root), or of any other user ID.</li>
+</ul>
+
+<p>The .apk files of alternate runtimes MAY be included in the system image of a
+device implementation, but MUST be signed with a key distinct from the key used
+to sign other applications included with the device implementation.</p>
+
+<p>When installing applications, alternate runtimes MUST obtain user consent for
+the Android permissions used by the application. If an application needs to
+make use of a device resource for which there is a corresponding Android
+permission (such as Camera, GPS, etc.), the alternate runtime MUST inform the
+user that the application will be able to access that resource. If the runtime
+environment does not record application capabilities in this manner, the
+runtime environment MUST list all permissions held by the runtime itself when
+installing any application using that runtime.</p>
+
+<h2 id="9_5_multi-user_support">9.5. Multi-User Support</h2>
+
+<div class="note">
+<p>This feature is optional for all device types.</p>
+</div>
+
+
+<p>Android includes support for multiple users and provides support for full user
+isolation [<a href="http://developer.android.com/reference/android/os/UserManager.html">Resources, 103]</a>. Device implementations MAY enable multiple users, but when enabled MUST meet
+the following requirements related to multi-user support [<a href="http://source.android.com/devices/storage/">Resources, 104</a>]:</p>
+
+<ul>
+  <li>Device implementations that do not declare the android.hardware.telephony
+feature flag MUST support restricted profiles, a feature that allows device
+owners to manage additional users and their capabilities on the device. With
+restricted profiles, device owners can quickly set up separate environments for
+additional users to work in, with the ability to manage finer-grained
+restrictions in the apps that are available in those environments.</li>
+  <li>Conversely device implementations that declare the android.hardware.telephony
+feature flag MUST NOT support restricted profiles but MUST align with the AOSP
+implementation of controls to enable /disable other users from accessing the
+voice calls and SMS.</li>
+  <li>Device implementations MUST, for each user, implement a security model
+consistent with the Android platform security model as defined in Security and
+Permissions reference document in the APIs [<a href="http://developer.android.com/guide/topics/security/permissions.html">Resources, 102</a>].</li>
+  <li>Device implementations MAY support creating users and managed profiles via the
+android.app.admin.DevicePolicyManager APIs, and if supported, MUST declare the
+platform feature flag android.software.managed_users.
+  <li>Device implementations that declare the feature flag
+android.software.managed_users MUST use the upstream AOSP icon badge to
+represent the managed applications and other badge UI elements like Recents &
+Notifications.</li>
+  <li>Each user instance on an Android device MUST have separate and isolated
+external storage directories. Device implementations MAY store multiple users'
+data on the same volume or filesystem. However, the device implementation MUST
+ensure that applications owned by and running on behalf a given user cannot
+list, read, or write to data owned by any other user. Note that removable
+media, such as SD card slots, can allow one user to access another&rsquo;s data by
+means of a host PC. For this reason, device implementations that use removable
+media for the external storage APIs MUST encrypt the contents of the SD card if
+multiuser is enabled using a key stored only on non-removable media accessible
+only to the system. As this will make the media unreadable by a host PC, device
+implementations will be required to switch to MTP or a similar system to
+provide host PCs with access to the current user&rsquo;s data. Accordingly, device
+implementations MAY but SHOULD NOT enable multi-user if they use removable
+media [<a href="http://developer.android.com/reference/android/os/Environment.html">Resources, 105</a>] for primary external storage.</li>
+</ul>
+
+<h2 id="9_6_premium_sms_warning">9.6. Premium SMS Warning</h2>
+
+
+<p>Android includes support for warning users of any outgoing premium SMS message
+[<a href="http://en.wikipedia.org/wiki/Short_code">Resources, 106</a>] . Premium SMS messages are text messages sent to a service registered with a
+carrier that may incur a charge to the user. Device implementations that
+declare support for android.hardware.telephony MUST warn users before sending a
+SMS message to numbers identified by regular expressions defined in
+/data/misc/sms/codes.xml file in the device. The upstream Android Open Source
+Project provides an implementation that satisfies this requirement.</p>
+
+<h2 id="9_7_kernel_security_features">9.7. Kernel Security Features</h2>
+
+
+<p>The Android Sandbox includes features that can use the Security-Enhanced Linux
+(SELinux) mandatory access control (MAC) system and other security features in
+the Linux kernel. SELinux or any other security features, if implemented below
+the Android framework:</p>
+
+<ul>
+  <li>MUST maintain compatibility with existing applications.</li>
+  <li>MUST NOT have a visible user interface when a security violation is detected
+and successfully blocked, but MAY have a visible user interface when an
+unblocked security violation occurs resulting in a successful exploit.</li>
+  <li>SHOULD NOT be user or developer configurable.</li>
+</ul>
+
+<p>If any API for configuration of policy is exposed to an application that can
+affect another application (such as a Device Administration API), the API MUST
+NOT allow configurations that break compatibility.</p>
+
+<p>Devices MUST implement SELinux or an equivalent mandatory access control system
+if using a kernel other than Linux and meet the following requirements, which
+are satisfied by the reference implementation in the upstream Android Open
+Source Project.</p>
+
+<p>Device implementations:</p>
+
+<ul>
+  <li>MUST support a SELinux policy that allows the SELinux mode to be set on a
+per-domain basis, and MUST configure all domains in enforcing mode. No
+permissive mode domains are allowed, including domains specific to a
+device/vendor.</li>
+  <li>SHOULD load policy from /sepolicy file on the device.</li>
+  <li>MUST NOT modify, omit, or replace the neverallow rules present within the
+sepolicy file provided in the upstream Android Open Source Project (AOSP) and
+the policy MUST compile with all neverallow present, for both AOSP SELinux
+domains as well as device/vendor specific domains.</li>
+  <li>MUST support dynamic updates of the SELinux policy file without requiring a
+system image update.</li>
+</ul>
+
+<p>Device implementations SHOULD retain the default SELinux policy provided in the
+upstream Android Open Source Project, until they have first audited their
+additions to the SELinux policy. Device implementations MUST be compatible with
+the upstream Android Open Source Project.</p>
+
+<h2 id="9_8_privacy">9.8. Privacy</h2>
+
+<p>If the device implements functionality in the system that captures the contents
+displayed on the screen and/or records the audio stream played on the device,
+it MUST continuously notify the user whenever this functionality is enabled and
+actively capturing/recording.</p>
+
+<p>If a device implementation has a mechanism that routes network data traffic
+through a proxy server or VPN gateway by default (for example, preloading a VPN
+service with android.permission.CONTROL_VPN granted), the device implementation
+MUST ask for the user's consent before enabling that mechanism.</p>
+
+<h2 id="9_9_full-disk_encryption">9.9. Full-Disk Encryption</h2>
+
+<div class="note">
+<p>Optional for Android device implementations without a lock screen.</p>
+</div>
+
+
+<p>If the device implementation supports a lock screen with PIN (numeric) or
+PASSWORD (alphanumeric), the device MUST support full-disk encryption of the
+application private data (/data partition), as well
+as the SD card partition if it is a permanent, non-removable part of the device
+[<a href="http://source.android.com/devices/tech/security/encryption/index.html">Resources, 107</a>]. For devices supporting full-disk encryption, the full-disk encryption SHOULD
+be enabled all the time after the user has completed the out-of-box experience.
+While this requirement is stated as SHOULD for this version of the Android
+platform, it is <strong>very strongly RECOMMENDED</strong> as we expect this to change to MUST in the future versions of Android.
+Encryption MUST use AES with a key of 128-bits (or greater) and a mode designed
+for storage (for example, AES-XTS, AES-CBC-ESSIV). The encryption key MUST NOT
+be written to storage at any time without being encrypted. Other than when in
+active use, the encryption key SHOULD be AES encrypted with the lockscreen
+passcode stretched using a slow stretching algorithm (e.g. PBKDF2 or scrypt).
+If the user has not specified a lockscreen passcode or has disabled use of the
+passcode for encryption, the system SHOULD use a default passcode to wrap the
+encryption key. If the device provides a hardware-backed keystore, the password
+stretching algorithm MUST be cryptographically bound to that keystore. The
+encryption key MUST NOT be sent off the device (even when wrapped with the user
+passcode and/or hardware bound key). The upstream Android Open Source project
+provides a preferred implementation of this feature based on the linux kernel
+feature dm-crypt.</p>
+
+<h2 id="9_10_verified_boot">9.10. Verified Boot</h2>
+
+<p>
+Verified boot is a feature that guarantees the integrity of the device software.
+If a device implementation supports the feature, it MUST:
+<ul>
+<li>Declare the platform feature flag android.software.verified_boot</li>
+<li>Perform verification on every boot sequence</li>
+<li>Start verification from a hardware key that is the root of trust, and go
+all the way up to the system partition</li>
+<li>Implement each stage of verification to check the integrity and authenticity
+of all the bytes in the next stage before executing the code in the next stage</li>
+<li>Use verification algorithms as strong as current recommendations
+from NIST for hashing algorithms (SHA-256) and public key sizes (RSA-2048)</li>
+</ul>
+</p>
+
+<p>Device implementations SHOULD support verified boot for device integrity.
+While this requirement is SHOULD for this version of the Android platform,
+it is <strong>strongly RECOMMENDED</strong> as we expect this to change to MUST
+in future versions of Android. The upstream Android Open Source Project provides
+a preferred implementation of this feature based on the linux kernel feature dm-verity.
+</p>
+
+<h1 id="10_software_compatibility_testing">10. Software Compatibility Testing</h1>
+
+
+<p>Device implementations MUST pass all tests described in this section.</p>
+
+<p>However, note that no software test package is fully comprehensive. For this
+reason, device implementers are <strong>very strongly encouraged</strong> to make the minimum number of changes as possible to the reference and
+preferred implementation of Android available from the Android Open Source
+Project. This will minimize the risk of introducing bugs that create
+incompatibilities requiring rework and potential device updates.</p>
+
+<h2 id="10_1_compatibility_test_suite">10.1. Compatibility Test Suite</h2>
+
+
+<p>Device implementations MUST pass the Android Compatibility Test Suite (CTS) [<a href="http://source.android.com/compatibility/index.html">Resources, 108</a>] available from the Android Open Source Project, using the final shipping
+software on the device. Additionally, device implementers SHOULD use the
+reference implementation in the Android Open Source tree as much as possible,
+and MUST ensure compatibility in cases of ambiguity in CTS and for any
+reimplementations of parts of the reference source code.</p>
+
+<p>The CTS is designed to be run on an actual device. Like any software, the CTS
+may itself contain bugs. The CTS will be versioned independently of this
+Compatibility Definition, and multiple revisions of the CTS may be released for
+Android 5.1. Device implementations MUST pass the latest CTS version available
+at the time the device software is completed.</p>
+
+<h2 id="10_2_cts_verifier">10.2. CTS Verifier</h2>
+
+
+<p>Device implementations MUST correctly execute all applicable cases in the CTS
+Verifier. The CTS Verifier is included with the Compatibility Test Suite, and
+is intended to be run by a human operator to test functionality that cannot be
+tested by an automated system, such as correct functioning of a camera and
+sensors.</p>
+
+<p>The CTS Verifier has tests for many kinds of hardware, including some hardware
+that is optional. Device implementations MUST pass all tests for hardware that
+they possess; for instance, if a device possesses an accelerometer, it MUST
+correctly execute the Accelerometer test case in the CTS Verifier. Test cases
+for features noted as optional by this Compatibility Definition Document MAY be
+skipped or omitted.</p>
+
+<p>Every device and every build MUST correctly run the CTS Verifier, as noted
+above. However, since many builds are very similar, device implementers are not
+expected to explicitly run the CTS Verifier on builds that differ only in
+trivial ways. Specifically, device implementations that differ from an
+implementation that has passed the CTS Verifier only by the set of included
+locales, branding, etc. MAY omit the CTS Verifier test.</p>
+
+<h1 id="11_updatable_software">11. Updatable Software</h1>
+
+
+<p>Device implementations MUST include a mechanism to replace the entirety of the
+system software. The mechanism need not perform &ldquo;live&rdquo; upgrades&mdash;that is, a
+device restart MAY be required.</p>
+
+<p>Any method can be used, provided that it can replace the entirety of the
+software preinstalled on the device. For instance, any of the following
+approaches will satisfy this requirement:</p>
+
+<ul>
+  <li>&ldquo;Over-the-air (OTA)&rdquo; downloads with offline update via reboot</li>
+  <li>&ldquo;Tethered&rdquo; updates over USB from a host PC</li>
+  <li>&ldquo;Offline&rdquo; updates via a reboot and update from a file on removable storage</li>
+</ul>
+
+<p>However, if the device implementation includes support for an unmetered data
+connection such as 802.11 or Bluetooth PAN (Personal Area Network) profile:</p>
+
+<ul>
+<li>Android Automotive implementations SHOULD support OTA downloads with offline
+update via reboot.</li>
+<li>All other device implementations MUST support OTA downloads with offline
+update via reboot.</li>
+</ul>
+
+<p>The update mechanism used MUST support updates without wiping user data. That
+is, the update mechanism MUST preserve application private data and application
+shared data. Note that the upstream Android software includes an update
+mechanism that satisfies this requirement.</p>
+
+<p>For device implementations that are launching with Android 5.1 and later, the
+update mechanism SHOULD support verifying that the system image is binary
+identical to expected result following an OTA. The block-based OTA
+implementation in the upstream Android Open Source Project, added since Android
+5.1, satisfies this requirement.</p>
+
+<p>If an error is found in a device implementation after it has been released but
+within its reasonable product lifetime that is determined in consultation with
+the Android Compatibility Team to affect the compatibility of third-party
+applications, the device implementer MUST correct the error via a software
+update available that can be applied per the mechanism just described.</p>
+
+<h1 id="12_document_changelog">12. Document Changelog</h1>
+
+
+<p>The following table contains a summary of the changes to the Compatibility
+Definition in this release. </p>
+<table>
+ <tr>
+    <th>Section</th>
+    <th>Summary of change</th>
+ </tr>
+ <tr>
+    <td>2. Device Types</td>
+    <td>Added definition for Android automotive implementation.</td>
+ </tr>
+ <tr>
+    <td>2.1 Device Configurations</td>
+    <td>Added column for Android automotive implementation.</td>
+ </tr>
+ <tr>
+    <td>3.3.2. 32-bit ARM Native Code Compatibility</td>
+    <td>New section added.</td>
+ </tr>
+ <tr>
+    <td>3.4.1. WebView Compatibility</td>
+    <td>Updated webview user agent string requirement to accomodate upstream
+        implementation change.</td>
+ </tr>
+ <tr>
+    <td>3.4.2. Browser compatibility</td>
+    <td>Added Android automotive implementations as another case that MAY omit a
+        browser application.</td>
+ </tr>
+ <tr>
+    <td>3.7. Runtime Compatibility</td>
+    <td>Updated required runtime heap size for smaller screens and added requirement
+        for the new dpi bucket (280dpi).</td>
+ </tr>
+ <tr>
+    <td>3.8.3. Notifications</td>
+    <td>Clarified notification requirement for Android Watch, Television and
+        Automotive implementations.</td>
+ </tr>
+ <tr>
+    <td>3.8.10. Lock Screen Media Control<</td>
+    <td>Clarified requirement for Android Watch and Automotive implementations.</td>
+ </tr>
+ <tr>
+    <td>3.8.13. Unicode and font</td>
+    <td>Relaxed Emoji character input method requirement.</td>
+ </tr>
+ <tr>
+    <td>3.9. Device Administration</td>
+    <td>Clarified condition when the full range of device administration policies
+        has to be supported.</td>
+ </tr>
+ <tr>
+    <td>3.10. Accessibility</td>
+    <td>Added Android automotive requirements.</td>
+ </tr>
+ <tr>
+    <td>3.11. Text-To-Speech</td>
+    <td>Added Android automotive requirements.</td>
+ </tr>
+ <tr>
+    <td>5.1. Media Codecs</td>
+    <td>Mandated decoding support for codecs reported by CamcorderProfile.</td>
+ </tr>
+   <tr>
+    <td>5.1.3 Video Codecs</td>
+    <td>Added Android automotive requirements.</td>
+ </tr>
+ <tr>
+    <td>7.1.1.3. Screen Density</td>
+    <td>Added a new screen dpi (280dpi).</td>
+ </tr>
+ <tr>
+    <td>7.1.5. Legacy Application Compatibility Mode</td>
+    <td>Added Android automotive requirements.</td>
+ </tr>
+ <tr>
+    <td>7.2 Input Devices</td>
+    <td>Added general introduction statement.</td>
+ </tr>
+ <tr>
+    <td>7.2.1. Keyboard</td>
+    <td>Added Android Automotive requirements.</td>
+ </tr>
+ <tr>
+    <td>7.2.3. Navigation Keys</td>
+    <td>Added Android Automotive requirements.</td>
+ </tr>
+ <tr>
+    <td>7.3.1. Accelerometer</td>
+    <td>Relaxed requirement for reporting frequency on Android Watch.</td>
+ </tr>
+ <tr>
+    <td>7.3.4. Gyroscope</td>
+    <td>Relaxed requirement for reporting frequency on Android Watch.</td>
+ </tr>
+ <tr>
+    <td>7.4.3 Bluetooth</td>
+    <td>Added Android Automotive requirements.</td>
+ </tr>
+ <tr>
+    <td>7.4.4. Near-Field Communications</td>
+    <td>Clarified condition for when Host Card Emulation is a requirement.</td>
+ </tr>
+ <tr>
+    <td>7.6.1. Minimum Memory and Storage</td>
+    <td>Updated minimum memory requirements for lower resulution screen devices
+        and added hard-limit requirement isLowRamDevice().</td>
+ </tr>
+ <tr>
+    <td>7.6.2. Application Shared Storage</td>
+    <td>Updated requirements when support for host machine access is mandatory.</td>
+ </tr>
+ <tr>
+    <td>7.8.1. Microphone</td>
+    <td>Added Android Automotive requirements.</td>
+ </tr>
+ <tr>
+    <td>8.2. File I/O Access Performance</td>
+    <td>Clarified requirements.</td>
+ </tr>
+ <tr>
+    <td>9.8. Privacy</td>
+    <td>Added privacy requirement for preloaded VPNs.</td>
+ </tr>
+ <tr>
+    <td>9.9. Full-Disk Encryption</td>
+    <td>Clarified condition when Full-Disk encryption support is mandatory.</td>
+ </tr>
+ <tr>
+    <td>9.10. Verified Boot</td>
+    <td>Clarified definition of verified boot.</td>
+ </tr>
+ <tr>
+    <td>11. Updatable Software</td>
+    <td>Clarified the OTA download requirement is allowed but not mandatory for
+        Android Automotive implementations.</td>
+ </tr>
+</table>
+
+
+<h1 id="13_contact_us">13. Contact Us</h1>
+
+
+<p>You can join the android-compatibility forum <a href="https://groups.google.com/forum/#!forum/android-compatibility">[Resources, 109</a>] and ask for clarifications or bring up any issues that you think the document
+does not cover.</p>
+
+<h1 id="14_resources">14. Resources</h1>
+
+
+<p>1. IETF RFC2119 Requirement Levels: <a href="http://www.ietf.org/rfc/rfc2119.txt">http://www.ietf.org/rfc/rfc2119.txt</a></p>
+
+<p>2. Android Open Source Project: <a href="http://source.android.com/">http://source.android.com/</a></p>
+
+<p>3. Android Television features: <a href="http://developer.android.com/reference/android/content/pm/PackageManager.html#FEATURE_LEANBACK">http://developer.android.com/reference/android/content/pm/PackageManager.html#FEATURE_LEANBACK</a> </p>
+
+<p>4. Android Watch feature: <a href="http://developer.android.com/reference/android/content/res/Configuration.html#UI_MODE_TYPE_WATCH">http://developer.android.com/reference/android/content/res/Configuration.html#UI_MODE_TYPE_WATCH</a></p>
+
+<p>5. API definitions and documentation: <a href="http://developer.android.com/reference/packages.html">http://developer.android.com/reference/packages.html</a></p>
+
+<p>6. Android Permissions reference: <a href="http://developer.android.com/reference/android/Manifest.permission.html">http://developer.android.com/reference/android/Manifest.permission.html</a></p>
+
+<p>7. android.os.Build reference: <a href="http://developer.android.com/reference/android/os/Build.html">http://developer.android.com/reference/android/os/Build.html</a></p>
+
+<p>8. Android 5.1 allowed version strings: <a href="http://source.android.com/compatibility/5.1/versions.html">http://source.android.com/compatibility/5.1/versions.html</a></p>
+
+<p>9. Telephony Provider: <a href="http://developer.android.com/reference/android/provider/Telephony.html">http://developer.android.com/reference/android/provider/Telephony.html</a></p>
+
+<p>10. Host-based Card Emulation: <a href="http://developer.android.com/guide/topics/connectivity/nfc/hce.html">http://developer.android.com/guide/topics/connectivity/nfc/hce.html</a></p>
+
+<p>11. Android Extension Pack: <a href="http://developer.android.com/guide/topics/graphics/opengl.html#aep">http://developer.android.com/guide/topics/graphics/opengl.html#aep</a> </p>
+
+<p>12. android.webkit.WebView class: <a href="http://developer.android.com/reference/android/webkit/WebView.html">http://developer.android.com/reference/android/webkit/WebView.html</a></p>
+
+<p>13. WebView compatibility: <a href="http://www.chromium.org/">http://www.chromium.org/</a></p>
+
+<p>14. HTML5: <a href="http://html.spec.whatwg.org/multipage/">http://html.spec.whatwg.org/multipage/</a></p>
+
+<p>15. HTML5 offline capabilities:<a href="http://dev.w3.org/html5/spec/Overview.html#offline"> http://dev.w3.org/html5/spec/Overview.html#offline</a></p>
+
+<p>16. HTML5 video tag: <a href="http://dev.w3.org/html5/spec/Overview.html#video">http://dev.w3.org/html5/spec/Overview.html#video</a></p>
+
+<p>17. HTML5/W3C geolocation API: <a href="http://www.w3.org/TR/geolocation-API/">http://www.w3.org/TR/geolocation-API/</a></p>
+
+<p>18. HTML5/W3C webstorage API: <a href="http://www.w3.org/TR/webstorage/">http://www.w3.org/TR/webstorage/</a></p>
+
+<p>19. HTML5/W3C IndexedDB API: <a href="http://www.w3.org/TR/IndexedDB/">http://www.w3.org/TR/IndexedDB/</a></p>
+
+<p>20. Dalvik Executable Format and bytecode specification: available in the
+Android source code, at dalvik/docs</p>
+
+<p>21. AppWidgets: <a href="http://developer.android.com/guide/practices/ui_guidelines/widget_design.html">http://developer.android.com/guide/practices/ui_guidelines/widget_design.html</a></p>
+
+<p>22. Notifications: <a href="http://developer.android.com/guide/topics/ui/notifiers/notifications.html">http://developer.android.com/guide/topics/ui/notifiers/notifications.html</a></p>
+
+<p>23. Application Resources: <a href="https://developer.android.com/guide/topics/resources/available-resources.html">https://developer.android.com/guide/topics/resources/available-resources.html</a></p>
+
+<p>24. Status Bar icon style guide: <a href="http://developer.android.com/design/style/iconography.html">http://developer.android.com/design/style/iconography.html</a></p>
+
+<p>25. Notifications Resources: <a href="https://developer.android.com/design/patterns/notifications.html">https://developer.android.com/design/patterns/notifications.html</a> </p>
+
+<p>26. Search Manager: <a href="http://developer.android.com/reference/android/app/SearchManager.html">http://developer.android.com/reference/android/app/SearchManager.html</a> </p>
+
+<p>27. Toasts: <a href="http://developer.android.com/reference/android/widget/Toast.html">http://developer.android.com/reference/android/widget/Toast.html</a></p>
+
+<p>28. Themes: <a href="http://developer.android.com/guide/topics/ui/themes.html">http://developer.android.com/guide/topics/ui/themes.html</a></p>
+
+<p>29. R.style class: <a href="http://developer.android.com/reference/android/R.style.html">http://developer.android.com/reference/android/R.style.html</a></p>
+
+<p>30. Material design: <a href="http://developer.android.com/reference/android/R.style.html#Theme_Material">http://developer.android.com/reference/android/R.style.html#Theme_Material</a> </p>
+
+<p>31. Live Wallpapers: <a href="http://developer.android.com/reference/android/service/wallpaper/WallpaperService.html">http://developer.android.com/reference/android/service/wallpaper/WallpaperService.html</a></p>
+
+<p>32. Overview screen resources: <a href="http://developer.android.com/guide/components/recents.html">http://developer.android.com/guide/components/recents.html</a> </p>
+
+<p>33. Screen pinning: <a href="https://developer.android.com/about/versions/android-5.0.html#ScreenPinning">https://developer.android.com/about/versions/android-5.0.html#ScreenPinning</a> </p>
+
+<p>34. Input methods: <a href="http://developer.android.com/guide/topics/text/creating-input-method.html">http://developer.android.com/guide/topics/text/creating-input-method.html</a> </p>
+
+<p>35. Media Notification: <a href="https://developer.android.com/reference/android/app/Notification.MediaStyle.html">https://developer.android.com/reference/android/app/Notification.MediaStyle.html</a></p>
+
+<p>36. Dreams: <a href="http://developer.android.com/reference/android/service/dreams/DreamService.html">http://developer.android.com/reference/android/service/dreams/DreamService.html</a></p>
+
+<p>37. Settings.Secure LOCATION_MODE:</p>
+
+<p><a href="http://developer.android.com/reference/android/provider/Settings.Secure.html#LOCATION_MODE">http://developer.android.com/reference/android/provider/Settings.Secure.html#LOCATION_MODE</a></p>
+
+<p>38. Unicode 6.1.0: <a href="http://www.unicode.org/versions/Unicode6.1.0/">http://www.unicode.org/versions/Unicode6.1.0/</a></p>
+
+<p>39. Android Device Administration: <a href="http://developer.android.com/guide/topics/admin/device-admin.html">http://developer.android.com/guide/topics/admin/device-admin.html</a></p>
+
+<p>40. DevicePolicyManager reference: <a href="http://developer.android.com/reference/android/app/admin/DevicePolicyManager.html">http://developer.android.com/reference/android/app/admin/DevicePolicyManager.html</a></p>
+
+<p>41. Android Device Owner App:</p>
+
+<p><a href="http://developer.android.com/reference/android/app/admin/DevicePolicyManager.html#isDeviceOwnerApp(java.lang.String)">http://developer.android.com/reference/android/app/admin/DevicePolicyManager.html#isDeviceOwnerApp(java.lang.String)</a></p>
+
+<p>42. Android Accessibility Service APIs: <a href="http://developer.android.com/reference/android/accessibilityservice/AccessibilityService.html">http://developer.android.com/reference/android/accessibilityservice/AccessibilityService.html</a></p>
+
+<p>43. Android Accessibility APIs: <a href="http://developer.android.com/reference/android/view/accessibility/package-summary.html">http://developer.android.com/reference/android/view/accessibility/package-summary.html</a></p>
+
+<p>44. Eyes Free project: <a href="http://code.google.com/p/eyes-free/">http://code.google.com/p/eyes-free</a></p>
+
+<p>45. Text-To-Speech APIs: <a href="http://developer.android.com/reference/android/speech/tts/package-summary.html">http://developer.android.com/reference/android/speech/tts/package-summary.html</a></p>
+
+<p>46. Television Input Framework: <a href="https://source.android.com/devices/tv/index.html">https://source.android.com/devices/tv/index.html</a></p>
+
+<p>47. Reference tool documentation (for adb, aapt, ddms, systrace): <a href="http://developer.android.com/tools/help/index.html">http://developer.android.com/tools/help/index.html</a></p>
+
+<p>48. Android apk file description: <a href="http://developer.android.com/guide/components/fundamentals.html">http://developer.android.com/guide/components/fundamentals.html </a></p>
+
+<p>49. Manifest files: <a href="http://developer.android.com/guide/topics/manifest/manifest-intro.html">http://developer.android.com/guide/topics/manifest/manifest-intro.html</a></p>
+
+<p>50. Android Media Formats: <a href="http://developer.android.com/guide/appendix/media-formats.html">http://developer.android.com/guide/appendix/media-formats.html</a></p>
+
+<p>51. RTC Hardware Coding Requirements: <a href="http://www.webmproject.org/hardware/rtc-coding-requirements/">http://www.webmproject.org/hardware/rtc-coding-requirements/</a></p>
+
+<p>52. AudioEffect API: <a href="http://developer.android.com/reference/android/media/audiofx/AudioEffect.html">http://developer.android.com/reference/android/media/audiofx/AudioEffect.html</a></p>
+
+<p>53. Android android.content.pm.PackageManager class and Hardware Features List:</p>
+
+<p><a href="http://developer.android.com/reference/android/content/pm/PackageManager.html">http://developer.android.com/reference/android/content/pm/PackageManager.html</a></p>
+
+<p>54. HTTP Live Streaming Draft Protocol: <a href="http://tools.ietf.org/html/draft-pantos-http-live-streaming-03">http://tools.ietf.org/html/draft-pantos-http-live-streaming-03</a></p>
+
+<p>55. ADB: <a href="http://developer.android.com/tools/help/adb.html">http://developer.android.com/tools/help/adb.html</a> </p>
+
+<p>56. Dumpsys: <a href="https://source.android.com/devices/input/diagnostics.html">https://source.android.com/devices/input/diagnostics.html</a> </p>
+
+<p>57. DDMS: <a href="http://developer.android.com/tools/debugging/ddms.html">http://developer.android.com/tools/debugging/ddms.html</a> </p>
+
+<p>58. Monkey testing tool: <a href="http://developer.android.com/tools/help/monkey.html">http://developer.android.com/tools/help/monkey.html</a> </p>
+
+<p>59. SysyTrace tool: <a href="http://developer.android.com/tools/help/systrace.html">http://developer.android.com/tools/help/systrace.html</a></p>
+
+<p>60. Android Application Development-Related Settings:</p>
+
+<p><a href="http://developer.android.com/reference/android/provider/Settings.html#ACTION_APPLICATION_DEVELOPMENT_SETTINGS">http://developer.android.com/reference/android/provider/Settings.html#ACTION_APPLICATION_DEVELOPMENT_SETTINGS</a></p>
+
+<p>61. Supporting Multiple Screens: <a href="http://developer.android.com/guide/practices/screens_support.html">http://developer.android.com/guide/practices/screens_support.html</a></p>
+
+<p>62. android.util.DisplayMetrics: <a href="http://developer.android.com/reference/android/util/DisplayMetrics.html">http://developer.android.com/reference/android/util/DisplayMetrics.html</a></p>
+
+<p>63. RenderScript: <a href="http://developer.android.com/guide/topics/renderscript/">http://developer.android.com/guide/topics/renderscript/</a></p>
+
+<p>64. Android extension pack for OpenGL ES: <a href="https://developer.android.com/reference/android/opengl/GLES31Ext.html">https://developer.android.com/reference/android/opengl/GLES31Ext.html</a> </p>
+
+<p>65. Hardware Acceleration: <a href="http://developer.android.com/guide/topics/graphics/hardware-accel.html">http://developer.android.com/guide/topics/graphics/hardware-accel.html</a></p>
+
+<p>66. EGL Extension-EGL_ANDROID_RECORDABLE:</p>
+
+<p><a href="http://www.khronos.org/registry/egl/extensions/ANDROID/EGL_ANDROID_recordable.txt">http://www.khronos.org/registry/egl/extensions/ANDROID/EGL_ANDROID_recordable.txt</a></p>
+
+<p>67. Display Manager: <a href="http://developer.android.com/reference/android/hardware/display/DisplayManager.html">http://developer.android.com/reference/android/hardware/display/DisplayManager.html</a></p>
+
+<p>68. android.content.res.Configuration: <a href="http://developer.android.com/reference/android/content/res/Configuration.html">http://developer.android.com/reference/android/content/res/Configuration.html</a></p>
+
+<p>69. Action Assist: <a href="http://developer.android.com/reference/android/content/Intent.html#ACTION_ASSIST">http://developer.android.com/reference/android/content/Intent.html#ACTION_ASSIST</a></p>
+
+<p>70. Touch Input Configuration: <a href="http://source.android.com/devices/tech/input/touch-devices.html">http://source.android.com/devices/tech/input/touch-devices.html</a></p>
+
+<p>71. Motion Event API: <a href="http://developer.android.com/reference/android/view/MotionEvent.html">http://developer.android.com/reference/android/view/MotionEvent.html</a></p>
+
+<p>72. Key Event API: <a href="http://developer.android.com/reference/android/view/KeyEvent.html">http://developer.android.com/reference/android/view/KeyEvent.html</a> </p>
+
+<p>73. Android Open Source sensors: <a href="http://source.android.com/devices/sensors/">http://source.android.com/devices/sensors</a></p>
+
+<p>74. android.hardware.SensorEvent: <a href="http://developer.android.com/reference/android/hardware/SensorEvent.html">http://developer.android.com/reference/android/hardware/SensorEvent.html</a></p>
+
+<p>75. Timestamp sensor event: <a href="http://developer.android.com/reference/android/hardware/SensorEvent.html#timestamp">http://developer.android.com/reference/android/hardware/SensorEvent.html#timestamp</a></p>
+
+<p>76. Android Open Source composite sensors: <a href="http://source.android.com/devices/sensors/sensor-types.html#composite_sensor_type_summary">https://source.android.com/devices/sensors/sensor-types.html#composite_sensor_type_summary</a></p>
+
+<p>77. Continuous trigger mode: <a href="http://source.android.com/devices/sensors/report-modes.html#continuous">https://source.android.com/devices/sensors/report-modes.html#continuous</a></p>
+
+<p>78. Accelerometer sensor: <a href="http://developer.android.com/reference/android/hardware/Sensor.html#TYPE_ACCELEROMETER">http://developer.android.com/reference/android/hardware/Sensor.html#TYPE_ACCELEROMETER</a></p>
+
+<p>79. Wi-Fi Multicast API: <a href="http://developer.android.com/reference/android/net/wifi/WifiManager.MulticastLock.html">http://developer.android.com/reference/android/net/wifi/WifiManager.MulticastLock.html</a></p>
+
+<p>80. Wi-Fi Direct (Wi-Fi P2P): <a href="http://developer.android.com/reference/android/net/wifi/p2p/WifiP2pManager.html">http://developer.android.com/reference/android/net/wifi/p2p/WifiP2pManager.html</a></p>
+
+<p>81. WifiManager API: <a href="http://developer.android.com/reference/android/net/wifi/WifiManager.html">http://developer.android.com/reference/android/net/wifi/WifiManager.html</a></p>
+
+<p>82. Bluetooth API: <a href="http://developer.android.com/reference/android/bluetooth/package-summary.html">http://developer.android.com/reference/android/bluetooth/package-summary.html</a></p>
+
+<p>83. Bluetooth ScanFilter API: <a href="https://developer.android.com/reference/android/bluetooth/le/ScanFilter.html">https://developer.android.com/reference/android/bluetooth/le/ScanFilter.html</a></p>
+
+<p>84. NDEF Push Protocol: <a href="http://source.android.com/compatibility/ndef-push-protocol.pdf">http://source.android.com/compatibility/ndef-push-protocol.pdf</a></p>
+
+<p>85. Android Beam: <a href="http://developer.android.com/guide/topics/connectivity/nfc/nfc.html">http://developer.android.com/guide/topics/connectivity/nfc/nfc.html</a> </p>
+
+<p>86. Android NFC Sharing Settings:</p>
+
+<p><a href="http://developer.android.com/reference/android/provider/Settings.html#ACTION_NFCSHARING_SETTINGS">http://developer.android.com/reference/android/provider/Settings.html#ACTION_NFCSHARING_SETTINGS</a></p>
+
+<p>87. NFC Connection Handover: <a href="http://members.nfc-forum.org/specs/spec_list/#conn_handover">http://members.nfc-forum.org/specs/spec_list/#conn_handover</a></p>
+
+<p>88. Bluetooth Secure Simple Pairing Using NFC: <a href="http://members.nfc-forum.org/apps/group_public/download.php/18688/NFCForum-AD-BTSSP_1_1.pdf">http://members.nfc-forum.org/apps/group_public/download.php/18688/NFCForum-AD-BTSSP_1_1.pdf</a> </p>
+
+<p>89. Content Resolver: <a href="http://developer.android.com/reference/android/content/ContentResolver.html">http://developer.android.com/reference/android/content/ContentResolver.html</a></p>
+
+<p>90. Camera orientation API: <a href="http://developer.android.com/reference/android/hardware/Camera.html#setDisplayOrientation(int)">http://developer.android.com/reference/android/hardware/Camera.html#setDisplayOrientation(int)</a></p>
+
+<p>91. Camera: <a href="http://developer.android.com/reference/android/hardware/Camera.html">http://developer.android.com/reference/android/hardware/Camera.html</a></p>
+
+<p>92. Camera: <a href="http://developer.android.com/reference/android/hardware/Camera.Parameters.html">http://developer.android.com/reference/android/hardware/Camera.Parameters.html</a></p>
+
+<p>93. Camera hardware level: <a href="https://developer.android.com/reference/android/hardware/camera2/CameraCharacteristics.html#INFO_SUPPORTED_HARDWARE_LEVEL">https://developer.android.com/reference/android/hardware/camera2/CameraCharacteristics.html#INFO_SUPPORTED_HARDWARE_LEVEL</a> </p>
+
+<p>94. Camera version support: <a href="http://source.android.com/devices/camera/versioning.html">http://source.android.com/devices/camera/versioning.html</a> </p>
+
+<p>95. Android DownloadManager: <a href="http://developer.android.com/reference/android/app/DownloadManager.html">http://developer.android.com/reference/android/app/DownloadManager.html</a></p>
+
+<p>96. Android File Transfer: <a href="http://www.android.com/filetransfer">http://www.android.com/filetransfer</a></p>
+
+<p>97. Android Open Accessories: <a href="http://developer.android.com/guide/topics/connectivity/usb/accessory.html">http://developer.android.com/guide/topics/connectivity/usb/accessory.html</a></p>
+
+<p>98. Android USB Audio: <a href="http://developer.android.com/reference/android/hardware/usb/UsbConstants.html#USB_CLASS_AUDIO">http://developer.android.com/reference/android/hardware/usb/UsbConstants.html#USB_CLASS_AUDIO</a></p>
+
+<p>99. USB Charging Specification: <a href="http://www.usb.org/developers/docs/devclass_docs/USB_Battery_Charging_1.2.pdf">http://www.usb.org/developers/docs/devclass_docs/USB_Battery_Charging_1.2.pdf</a></p>
+
+<p>100. USB Host API:<a href="http://developer.android.com/guide/topics/connectivity/usb/host.html"> http://developer.android.com/guide/topics/connectivity/usb/host.html</a></p>
+
+<p>101. Wired audio headset: <a href="http://source.android.com/accessories/headset-spec.html">http://source.android.com/accessories/headset-spec.html</a> </p>
+
+<p>102. Android Security and Permissions reference: <a href="http://developer.android.com/guide/topics/security/permissions.html">http://developer.android.com/guide/topics/security/permissions.html</a></p>
+
+<p>103. UserManager reference: <a href="http://developer.android.com/reference/android/os/UserManager.html">http://developer.android.com/reference/android/os/UserManager.html</a></p>
+
+<p>104. External Storage reference: <a href="http://source.android.com/devices/storage">http://source.android.com/devices/storage</a></p>
+
+<p>105. External Storage APIs: <a href="http://developer.android.com/reference/android/os/Environment.html">http://developer.android.com/reference/android/os/Environment.html</a></p>
+
+<p>106. SMS Short Code: <a href="http://en.wikipedia.org/wiki/Short_code">http://en.wikipedia.org/wiki/Short_code</a></p>
+
+<p>107. Android Open Source Encryption: <a href="http://source.android.com/devices/tech/security/encryption/index.html">http://source.android.com/devices/tech/security/encryption/index.html</a></p>
+
+<p>108. Android Compatibility Program Overview: <a href="http://source.android.com/compatibility/index.html">http://source.android.com/compatibility/index.html</a></p>
+
+<p>109. Android Compatibility forum: <a href="https://groups.google.com/forum/#!forum/android-compatibility">https://groups.google.com/forum/#!forum/android-compatibility</a></p>
+
+<p>110. WebM project: <a href="http://www.webmproject.org/">http://www.webmproject.org/</a>  </p>
+
+<p>111. Android UI_MODE_TYPE_CAR API: <a href="http://developer.android.com/reference/android/content/res/Configuration.html#UI_MODE_TYPE_CAR">http://developer.android.com/reference/android/content/res/Configuration.html#UI_MODE_TYPE_CAR</a></p>
+
+<p>112. Android MediaCodecList API: <a href="http://developer.android.com/reference/android/media/MediaCodecList.html">http://developer.android.com/reference/android/media/MediaCodecList.html</a></p>
+
+<p>113. Android CamcorderProfile API: <a href="http://developer.android.com/reference/android/media/CamcorderProfile.html">http://developer.android.com/reference/android/media/CamcorderProfile.html</a></p>
+
+<p>Many of these resources are derived directly or indirectly from the Android
+SDK, and will be functionally identical to the information in that SDK&rsquo;s
+documentation. In any cases where this Compatibility Definition or the
+Compatibility Test Suite disagrees with the SDK documentation, the SDK
+documentation is considered authoritative. Any technical details provided in
+the references included above are considered by inclusion to be part of this
+Compatibility Definition.</p>
+
+</div>
+</body>
+</html>
diff --git a/src/compatibility/5.1/android-5.1-cdd.pdf b/src/compatibility/5.1/android-5.1-cdd.pdf
new file mode 100644
index 0000000..78a9857
--- /dev/null
+++ b/src/compatibility/5.1/android-5.1-cdd.pdf
Binary files differ
diff --git a/src/compatibility/5.1/android-cdd-body.pdf b/src/compatibility/5.1/android-cdd-body.pdf
new file mode 100644
index 0000000..df0552d
--- /dev/null
+++ b/src/compatibility/5.1/android-cdd-body.pdf
Binary files differ
diff --git a/src/compatibility/5.1/android-cdd-cover.css b/src/compatibility/5.1/android-cdd-cover.css
new file mode 100644
index 0000000..7364deb
--- /dev/null
+++ b/src/compatibility/5.1/android-cdd-cover.css
@@ -0,0 +1,86 @@
+/**
+* Link Styles
+*/
+
+
+a:link {
+    color: #09C;
+    text-decoration: none;
+}
+
+a:visited {
+    color: #639;
+}
+
+a:hover,
+a:focus,
+a:active {
+    color: #09C;
+}
+
+/**
+* Cover Styles
+*/
+
+
+table {
+    border: none;
+    margin: 0px;
+    padding: 0px;
+    width: 100%;
+    height: 100%;
+    background-color: black;
+}
+
+td {
+    border: none;
+    color: white;
+    font: 12pt/16pt Roboto, Arial, Helvetica, sans-serif;
+    background-color: black;
+}
+
+.title {
+    color: white;
+    font: 62px/72px Roboto, Arial, Helvetica, sans-serif;
+    padding: 40px 20px 50px 60px;
+    text-align: left;
+}
+
+.subtitle {
+    color: white;
+    font: 60px/70px Roboto, Arial, Helvetica, sans-serif;
+    padding: 50px 0px 40px 60px;
+    text-align: left;
+}
+
+.padding {
+    padding: 40px 20px 40px 60px;
+}
+
+.padding-bottom {
+    padding: 40px 20px 194px 60px;
+}
+
+.cover-text {
+    font: 20px/25px Roboto, Arial, Helvetica, sans-serif;
+    color: white;
+    padding: 5px 5px 5px 60px;
+    text-align: left;
+}
+
+
+/**
+* Body Styles
+*/
+
+body {
+    color: #333;
+    font: 12pt/16pt Roboto, Arial, Helvetica, sans-serif;
+    margin: 0px;
+    padding: 0px;
+}
+
+p {
+    margin: 0px;
+    padding: 0px;
+}
\ No newline at end of file
diff --git a/src/compatibility/5.1/android-cdd-cover.pdf b/src/compatibility/5.1/android-cdd-cover.pdf
new file mode 100644
index 0000000..90f12e9
--- /dev/null
+++ b/src/compatibility/5.1/android-cdd-cover.pdf
Binary files differ
diff --git a/src/compatibility/5.1/android-cdd-cover_5_1.html b/src/compatibility/5.1/android-cdd-cover_5_1.html
new file mode 100644
index 0000000..25eaefe
--- /dev/null
+++ b/src/compatibility/5.1/android-cdd-cover_5_1.html
@@ -0,0 +1,42 @@
+<!DOCTYPE html>
+<head>
+<title>Android 5.1 Compatibility Definition</title>
+<link rel="stylesheet" type="text/css" href="android-cdd-cover.css"/>
+</head>
+
+<body>
+
+<table>
+
+<tr>
+<td>
+<p><img src="../images/android-logo.png" alt="Android logo" class="padding"/></p>
+<p class="title">Compatibility Definition</p>
+</td>
+</tr>
+
+<tr>
+<td>
+<img src="../images/android-lollipop-mr1.jpg" alt="Lollipop logo" style="border-top: 5px solid orange; border-bottom: 5px solid orange"/>
+</td>
+</tr>
+
+<tr>
+<td>
+<p class="subtitle">Android 5.1</p>
+<p class="cover-text">Last updated: June 9th, 2015</p>
+<p class="cover-text">Copyright &copy; 2015, Google Inc. All rights reserved.</p>
+<p class="cover-text"><a href="mailto:compatibility@android.com">compatibility@android.com</a></p>
+</td>
+</tr>
+
+<tr>
+<td>
+<p class="padding-bottom"></p>
+</td>
+</tr>
+
+</table>
+
+</body>
+</html>
\ No newline at end of file
diff --git a/src/compatibility/android-5.1-cdd.pdf b/src/compatibility/android-5.1-cdd.pdf
new file mode 100644
index 0000000..78a9857
--- /dev/null
+++ b/src/compatibility/android-5.1-cdd.pdf
Binary files differ
diff --git a/src/compatibility/android-cdd.pdf b/src/compatibility/android-cdd.pdf
index f29d081..78a9857 100644
--- a/src/compatibility/android-cdd.pdf
+++ b/src/compatibility/android-cdd.pdf
Binary files differ
diff --git a/src/compatibility/contact-us.jd b/src/compatibility/contact-us.jd
index 6c590f5..e77b115 100644
--- a/src/compatibility/contact-us.jd
+++ b/src/compatibility/contact-us.jd
@@ -2,24 +2,24 @@
 @jd:body
 
 <!--
-    Copyright 2015 The Android Open Source Project     
+    Copyright 2015 The Android Open Source Project
 
-    Licensed under the Apache License, Version 2.0 (the "License");    
-    you may not use this file except in compliance with the License.   
-    You may obtain a copy of the License at    
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
 
         http://www.apache.org/licenses/LICENSE-2.0
 
-    Unless required by applicable law or agreed to in writing, software    
-    distributed under the License is distributed on an "AS IS" BASIS,    
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.   
-    See the License for the specific language governing permissions and    
-    limitations under the License.   
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
 -->
 <p>This page describes the
 contact methods for inquiries regarding the Android compatibility program,
 including the Compatibility Definition Document (CDD) and Compatibility Test
-Suite (CTS). See the <a href="{@docRoot}community/index.html">Community</a>
+Suite (CTS). See the <a href="{@docRoot}source/community.html">Community</a>
 page for communication channels regarding other topics.</p>
 
 <h2
@@ -38,7 +38,7 @@
 </ul>
 
 <p>To make best use of this list, please first read <a
-href="{@docRoot}source/community/index.html#getting-the-most-from-our-lists">Getting
+href="{@docRoot}source/community.html#getting-the-most-from-our-lists">Getting
 the Most from Our Lists</a> on the Community page. Users looking for help with
 Android devices should contact their carrier or manufacturer for help.</p>
 
@@ -49,4 +49,4 @@
 href="mailto:android-partnerships@google.com">android-partnerships@google.com</a>
 
 <p>While we read every message received, we cannot respond to each of them. We
-promise to contact you if we can help!</p>
+promise to contact you if we can help!</p>
\ No newline at end of file
diff --git a/src/compatibility/cts/development.jd b/src/compatibility/cts/development.jd
index 8494be4..662d94a 100644
--- a/src/compatibility/cts/development.jd
+++ b/src/compatibility/cts/development.jd
@@ -120,3 +120,70 @@
 <p>Follow the <a href="{@docRoot}source/submit-patches.html">Submitting Patches workflow</a>
 to contribute changes to CTS. A reviewer
 will be assigned to your change, and your change should be reviewed shortly!</p>
+
+<h2 id="release-schedule">Release schedule and branch information</h2>
+
+<p>CTS releases follow this schedule.</p>
+
+<p class="note"><strong>Note</strong>: This schedule is tentative and may be
+updated from time to time as CTS for the given Android version matures.</p>
+
+<table>
+<tr>
+  <th>Version</th>
+  <th>Branch</th>
+  <th>Frequency</th>
+</tr>
+</thead>
+<tbody>
+<tr>
+  <td>5.1</td>
+  <td>lollipop-mr1-cts-dev</td>
+  <td>Monthly</td>
+</tr>
+<tr>
+  <td>5.0</td>
+  <td>lollipop-cts-dev</td>
+  <td>Monthly</td>
+</tr>
+<tr>
+  <td>4.4</td>
+  <td>kitkat-cts-dev</td>
+  <td>Odd month (Jan, Mar, etc.)</td>
+</tr>
+<tr>
+  <td>4.3</td>
+  <td>jb-mr2-cts-dev</td>
+  <td>First month of each quarter</td>
+</tr>
+<tr>
+  <td>4.2</td>
+  <td>jb-mr1.1-cts-dev</td>
+  <td>First month of each quarter</td>
+</tr>
+</table>
+
+<h3 id="important-dates">Important Dates during month of the release</h3>
+
+<ul>
+  <li><strong>End of 1st Week</strong>: Code Freeze.  At this point,
+submissions on the current branch will no longer be accepted and will not be
+included in the next version of CTS.  Once we have chosen a candidate for
+release, the branch will again be open and accepting new submissions.
+
+  <li><strong>Second or third week</strong>: CTS is published in the Android
+Open Source Project (AOSP).
+</ul>
+
+<h3 id="auto-merge">Auto-merge flow</h3>
+
+<p>CTS development branches have been setup so that changes submitted to each
+branch will automatically merge as below:<br>
+jb-dev-> jb-mr1.1-cts-dev -> jb-mr2-cts-dev  -> kitkat-cts-dev ->
+lollipop-cts-dev -> lollipop-mr1-cts-dev -> &lt;private-development-branch for
+Android M&gt;</p>
+
+<p>If a changelist (CL) fails to merge correctly, the author of the CL will get
+an email with instructions on how to resolve the conflict. In most of the
+cases, the author of the CL can use the instructions to skip the auto-merge of
+the conflicting CL.</p>
diff --git a/src/compatibility/cts/images/camera-printed-target.png b/src/compatibility/cts/images/camera-printed-target.png
index 590dbf9..d405c50 100644
--- a/src/compatibility/cts/images/camera-printed-target.png
+++ b/src/compatibility/cts/images/camera-printed-target.png
Binary files differ
diff --git a/src/compatibility/cts/images/cts-0.png b/src/compatibility/cts/images/cts-0.png
index cca38c5..4264e4c 100644
--- a/src/compatibility/cts/images/cts-0.png
+++ b/src/compatibility/cts/images/cts-0.png
Binary files differ
diff --git a/src/compatibility/downloads.jd b/src/compatibility/downloads.jd
index f6b2b20..04d1749 100644
--- a/src/compatibility/downloads.jd
+++ b/src/compatibility/downloads.jd
@@ -32,6 +32,8 @@
 The source code for the following tests can be synced with the
 'android-cts-5.1_r1' tag in the open source tree.</p>
 <ul>
+<li><a href="5.1/android-5.1-cdd.pdf">Android 5.1 Compatibility Definition
+Document (CDD)</a></li>
 <li><a
 href="https://dl.google.com/dl/android/cts/android-cts-5.1_r1-linux_x86-arm.zip">Android
 5.1 R1 Compatibility Test Suite (CTS) - ARM</a></li>
diff --git a/src/compatibility/images/android-lollipop-mr1.jpg b/src/compatibility/images/android-lollipop-mr1.jpg
new file mode 100644
index 0000000..c9b757d
--- /dev/null
+++ b/src/compatibility/images/android-lollipop-mr1.jpg
Binary files differ
diff --git a/src/compatibility/images/compat-ecosystem.png b/src/compatibility/images/compat-ecosystem.png
index 29a9d15..4b166d1 100644
--- a/src/compatibility/images/compat-ecosystem.png
+++ b/src/compatibility/images/compat-ecosystem.png
Binary files differ
diff --git a/src/compatibility/index.jd b/src/compatibility/index.jd
index 95a39dc..6b29fa3 100644
--- a/src/compatibility/index.jd
+++ b/src/compatibility/index.jd
@@ -2,19 +2,19 @@
 @jd:body
 
 <!--
-    Copyright 2015 The Android Open Source Project     
+    Copyright 2015 The Android Open Source Project
 
-    Licensed under the Apache License, Version 2.0 (the "License");    
-    you may not use this file except in compliance with the License.   
-    You may obtain a copy of the License at    
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
 
         http://www.apache.org/licenses/LICENSE-2.0
 
-    Unless required by applicable law or agreed to in writing, software    
-    distributed under the License is distributed on an "AS IS" BASIS,    
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.   
-    See the License for the specific language governing permissions and    
-    limitations under the License.   
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
 -->
 <div id="qv-wrapper">
   <div id="qv">
@@ -24,70 +24,72 @@
   </div>
 </div>
 
-<p>Android's purpose is to establish an open platform for developers to build innovative apps.
-The Android Compatibility program defines the technical details of the Android platform and provides
-tools used by OEMs to ensure that developers' apps run on a variety of devices. The Android SDK
-provides built-in tools that developers use to clearly state the device features their apps
-require. And Google Play shows apps only to those devices that can properly run them.
-</p>
+<p>Android's purpose is to establish an open platform for developers to build
+innovative apps.</p>
+<ul>
+<li>The Android Compatibility program defines technical details of the
+Android platform and provides tools for OEMs to ensure developer applications
+run on a variety of devices.</li>
+<li>The Android SDK provides built-in tools for developers to clearly state the
+device features requires by their applications.
+<li>Google Play shows applications only to those devices that can properly run
+those applications.</li></li>
 
-<h2 id="why-build-compatible-android-devices">Why build compatible Android devices?</h2>
+<h2 id="why-build-compatible-android-devices">Why build compatible Android
+devices?</h2>
+
+<h3 id="users-want-a-customizable-device">Users want customizable devices</h3>
 
 <div class="figure">
   <img src="images/compat-ecosystem.png" alt="Compatibility ecosystem" id="figure1" />
   <p class="img-caption">
-    <strong>Figure 1.</strong> How the Android ecosystem thrives with device compatibility
+    <strong>Figure 1.</strong> The Android ecosystem thrives with device compatibility
   </p>
 </div>
 
-<h3 id="users-want-a-customizable-device">Users want a customizable device.</h3>
 <p>A mobile phone is a highly personal, always-on, always-present gateway to
 the Internet. We haven't met a user yet who didn't want to customize it by
 extending its functionality. That's why Android was designed as a robust
 platform for running aftermarket applications.</p>
-<h3 id="developers-outnumber-us-all">Developers outnumber us all.</h3>
-<p>No device manufacturer can hope to write all the software that a person could
-conceivably need. We need third-party developers to write the apps users want;
-so the Android Open Source Project aims to make it as easy and open as
-possible for developers to build apps.</p>
-<h3 id="everyone-needs-a-common-ecosystem">Everyone needs a common ecosystem.</h3>
-<p>Every line of code developers write to work around a particular phone's bug
-is a line of code that didn't add a new feature. The more compatible phones
-there are, the more apps there will be. By building a fully compatible Android
-device, you benefit from the huge pool of apps written for Android, while
-increasing the incentive for developers to build more of those apps.</p>
-<h2 id="android-compatibility-is-free-and-its-easy">Android compatibility is free, and it's easy.</h2>
-<p>If you are building a mobile device, you can follow these steps to make
-sure your device is compatible with Android. For more details about the
-Android compatibility program in general, see <a href="overview.html">the program overview</a>.</p>
-<p>Building a compatible device is a three-step process:</p>
+
+<h3 id="developers-outnumber-us-all">Developers outnumber us all</h3>
+<p>No device manufacturer can write all the software a user could conceivably
+need. We need third-party developers to write the apps users want, so the
+Android Open Source Project (AOSP) aims to make application development as easy
+and open as possible.</p>
+
+<h3 id="everyone-needs-a-common-ecosystem">Everyone needs a common ecosystem</h3>
+<p>Every line of code developers write to work around a bug is a line of code
+that didn't add a new feature. The more compatible mobile devices are, the more
+applications we'll have to run on those devices. By building a fully compatible
+Android device, you benefit from the huge pool of apps written for Android while
+increasing the incentive for developers to build more apps.</p>
+
+<h2 id="android-compatibility-is-free-and-its-easy">Android compatibility is
+free, and it's easy</h2>
+<p>To build an Android-compatible mobile device, follow this three-step
+process:</p>
 <ol>
-<li>
-<p><em>Obtain the <a href="{@docRoot}source/index.html">Android software source
-code</a></em>.
-    This is the source code for the Android platform that you port to your hardware.</p>
-</li>
-<li>
-<p><em>Comply with the <a href="{@docRoot}compatibility/android-cdd.pdf">Android
-Compatibility Definition Document (CDD)</a></em>.
-    The CDD enumerates the software and hardware requirements of a compatible Android device.</p>
-</li>
-<li>
-<p><em>Pass the <a href="{@docRoot}compatibility/cts-intro.html">Compatibility
-Test Suite (CTS)</a></em>.
-    Use the CTS as an ongoing aid to compatibility during the development process.</p>
-</li>
+<li><em>Obtain the <a href="{@docRoot}source/index.html">Android software source
+code</a></em>. This is the source code for the Android platform that you port
+to your hardware.</li>
+<li><em>Comply with the <a href="{@docRoot}compatibility/android-cdd.pdf">Android
+Compatibility Definition Document (CDD)</a></em>. The CDD enumerates the
+software and hardware requirements of a compatible Android device.</li>
+<li><em>Pass the <a href="{@docRoot}compatibility/cts-intro.html">Compatibility
+Test Suite (CTS)</a></em>. Use the CTS as an ongoing aid to evaluate
+compatibility during the development process.</li>
 </ol>
 
-<p>After complying with the CDD and passing the CTS, your device is now Android
-compatible. Android apps in the ecosystem will have a consistent experience on
-your device.</p>
+<p>After complying with the CDD and passing the CTS, your device is Android
+compatible, meaning Android apps in the ecosystem provide a consistent
+experience when running on your device. For details about the Android
+compatibility program, see the <a href="overview.html">program overview</a>.</p>
 
-<h2 id="licensing-gms">Licensing Google Mobile Services</h2>
-<p>If you've built an Android compatible device, you may wish to inquire about
-licensing Google’s proprietary suite of apps that run on top of Android -
-Google Mobile Services (GMS, which include Google Play, YouTube, Google Maps,
-Gmail, and more). Google Mobile Services is not part of the Android Open Source
-Project and is available only through a license with Google. Please visit
-<a href="contact-us.html">Contact Us</a> for more information on how to inquire
-about a GMS license.</p>
+<h2 id="licensing-gms">Licensing Google Mobile Services (GMS)</h2>
+<p>After building an Android compatible device, consider licensing Google Mobile
+Services (GMS), Google’s proprietary suite of apps (Google Play, YouTube, Google
+Maps, Gmail, and more ) that run on top of Android. GMS is not part of the
+Android Open Source Project and is available only through a license with Google.
+For information on how to request a GMS license, see
+<a href="contact-us.html">Contact Us</a>.</p>
\ No newline at end of file
diff --git a/src/compatibility/overview.jd b/src/compatibility/overview.jd
index aa0fccb..0a1bfca 100644
--- a/src/compatibility/overview.jd
+++ b/src/compatibility/overview.jd
@@ -2,7 +2,7 @@
 @jd:body
 
 <!--
-    Copyright 2013 The Android Open Source Project     
+    Copyright 2015 The Android Open Source Project     
 
     Licensed under the Apache License, Version 2.0 (the "License");    
     you may not use this file except in compliance with the License.   
diff --git a/src/devices/audio/images/venn.png b/src/devices/audio/images/venn.png
new file mode 100644
index 0000000..1db4f53
--- /dev/null
+++ b/src/devices/audio/images/venn.png
Binary files differ
diff --git a/src/devices/audio/latency.jd b/src/devices/audio/latency.jd
index 59c3f73..a45bf20 100644
--- a/src/devices/audio/latency.jd
+++ b/src/devices/audio/latency.jd
@@ -50,4 +50,8 @@
   <td>Round-trip audio latency results</td>
   <td><a href="latency_measurements.html">Audio Latency Measurements</a></td>
 </tr>
+<tr>
+  <td>Applications</td>
+  <td><a href="latency_app.html">Audio Latency for App Developers</a></td>
+</tr>
 </table>
diff --git a/src/devices/audio/latency_app.jd b/src/devices/audio/latency_app.jd
new file mode 100644
index 0000000..22e3984
--- /dev/null
+++ b/src/devices/audio/latency_app.jd
@@ -0,0 +1,174 @@
+page.title=Audio Latency for App Developers
+@jd:body
+
+<!--
+    Copyright 2015 The Android Open Source Project
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+-->
+
+<div id="qv-wrapper">
+  <div id="qv">
+    <h2>In this document</h2>
+    <ol id="auto-toc">
+    </ol>
+  </div>
+</div>
+
+<p>For the lowest audio latency possible, we recommend you use Android native audio
+based on OpenSL ES 1.0.1.</p>
+
+<h2 id=implementation>Implementation checklist</h2>
+
+<p>To use Android native audio:</p>
+
+<ol>
+
+<li>
+Download and install the
+<a href="https://developer.android.com/tools/sdk/ndk/index.html">Android NDK</a>.
+In the rest of this document, we'll assume <code>NDKroot</code> is the
+directory where you installed NDK.
+</li>
+
+<li>
+Read the <a href="#supporting">supporting documentation.</a>
+</li>
+
+<li>
+Check for API level 9 or higher.
+</li>
+
+<li>
+Check for feature
+<a href="http://developer.android.com/guide/topics/manifest/uses-feature-element.html#hw-features">android.hardware.audio.low_latency.</a>
+</li>
+
+<li>
+Use the recommended native buffer size and sample rate returned by
+<a href="http://developer.android.com/reference/android/media/AudioManager.html#getProperty(java.lang.String)">android.media.AudioManager.getProperty(java.lang.String)</a>
+<p> <strong>Note</strong>: the same buffer size and sample rate should also be used for input.</p>
+</li>
+
+<li>
+Usually an OpenSL ES buffer count of 1 is sufficient.
+</li>
+
+<li>
+Keep your callback handlers short, without bursty CPU usage or unbounded blocking.  Avoid
+<a href="avoiding_pi.html">priority inversion.</a>
+</li>
+
+<li>
+Consider using
+<a href="avoiding_pi.html#nonBlockingAlgorithms">non-blocking algorithms</a>
+to communicate between input and output callback handlers,
+and between the callback handlers and the rest of your application.
+</li>
+
+</ol>
+
+<h2 id=supporting>Supporting documentation</h2>
+
+<h3 id=opensl_es_1_0_1>OpenSL ES 1.0.1</h3>
+
+<p>
+Use a PDF viewer to review the
+<a href="https://www.khronos.org/registry/sles/specs/OpenSL_ES_Specification_1.0.1.pdf">OpenSL 1.0.1 Specification.</a>
+This is a rather long reference, and not all of it will be relevant to you; but you
+will need to consult it for details on the API.
+</p>
+
+<p class="note">
+<strong>Note</strong>: this document describes the full OpenSL ES 1.0.1, but Android
+native audio is actually based on a subset of OpenSL ES 1.0.1 with some Android-specific extensions.
+</p>
+
+<p>
+Documents describing later versions of OpenSL ES, such as 1.1,
+are not relevant to Android.
+</p>
+
+<h3 id=opensl_es_for_android>OpenSL ES for Android</h3>
+
+<p>
+The document "OpenSL ES for Android" is provided in the NDK installation,
+and is not currently available online.  Open this link in a browser:
+</p>
+
+<pre>
+NDKroot/docs/Additional_library_docs/opensles/index.html
+</pre>
+
+<p>
+You’ll want to skim the whole
+document, but pay special attention to the "Performance" subsection of the
+"Programming notes" section.
+</p>
+
+<p>
+Section "Supported features from OpenSL ES 1.0.1"
+describes the subset supported by Android.
+</p>
+
+<p>
+Section "Android extensions" describes Android-specific extensions
+that aren't included in base OpenSL ES 1.0.1.
+</p>
+
+<h3 id=relationship>Relationship with OpenSL ES 1.0.1</h3>
+
+<p>
+This Venn diagram shows the relationship between
+Android native audio and OpenSL ES 1.0.1.
+</p>
+
+<img src="images/venn.png" alt="Venn diagram" id="figure1" />
+<p class="img-caption">
+  <strong>Figure 1.</strong> Venn diagram
+</p>
+
+<h2 id=resources>Other resources</h2>
+
+<h3 id=source_android_com>source.android.com</h3>
+
+<p>
+The site <a href="{@docRoot}">source.android.com</a>
+is primarily designed for OEMs building Android
+devices, and the SoC vendors who supply components to these OEMs.
+</p>
+
+<p>
+However, there is a wealth of useful information about latency at this site, so
+you may want to review it.  See the articles at
+<a href="latency.html">Audio Latency.</a>
+</p>
+
+<h3 id=android_ndk>android-ndk</h3>
+
+<p>
+If you have questions about how to use Android native audio, you can ask at the discussion group
+<a href="https://groups.google.com/forum/#!forum/android-ndk">android-ndk.</a>
+</p>
+
+<h3 id=videos>Videos</h3>
+
+<dl>
+
+<dt><a href="https://www.youtube.com/watch?v=d3kfEeMZ65c">Google I/O 2013 - High performance audio on Android</a></dt>
+<dd>The whole video is about latency.</dd>
+
+<dt><a href="https://www.youtube.com/watch?v=92fgcUNCHic">Google I/O 2014 - Building great multi-media experiences on Android</a></dt>
+<dd>The first 14 minutes are about audio in general and input latency in particular.</dd>
+
+</dl>
diff --git a/src/devices/audio/latency_measurements.jd b/src/devices/audio/latency_measurements.jd
index e66b5f9..8055890 100644
--- a/src/devices/audio/latency_measurements.jd
+++ b/src/devices/audio/latency_measurements.jd
@@ -331,6 +331,16 @@
   <td>38</td>
 </tr>
 
+</tr>
+  <td>Nexus 9</td>
+  <td>5.1.1</td>
+  <td>LMY47X</td>
+  <td>48000</td>
+  <td>256</td>
+  <td>5.3</td>
+  <td>32</td>
+</tr>
+
 <tr>
   <td>Nexus 6</td>
   <td>5.0.1</td>
diff --git a/src/devices/audio/midi.jd b/src/devices/audio/midi.jd
new file mode 100644
index 0000000..38428c7
--- /dev/null
+++ b/src/devices/audio/midi.jd
@@ -0,0 +1,161 @@
+page.title=MIDI
+@jd:body
+
+<!--
+    Copyright 2015 The Android Open Source Project
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+-->
+
+<div id="qv-wrapper">
+  <div id="qv">
+    <h2>In this document</h2>
+    <ol id="auto-toc">
+    </ol>
+  </div>
+</div>
+
+<p>
+<a href="http://en.wikipedia.org/wiki/MIDI">MIDI</a> (Musical Instrument Digital Interface)
+is a standard protocol for inter-connecting computers with musical instruments, stage lighting,
+and other time-oriented media.
+</p>
+
+<p>
+The physical <a href="http://en.wikipedia.org/wiki/Transport_layer">transport layer</a>
+specified in original MIDI 1.0 is a current loop with
+<a href="http://en.wikipedia.org/wiki/DIN_connector">5-pin DIN</a> connector.
+</p>
+
+<p>
+Since MIDI 1.0, additional transports have been defined, including MIDI over USB
+and a proposed draft for MIDI over
+<a href="http://en.wikipedia.org/wiki/Bluetooth_low_energy">Bluetooth Low Energy</a> (BLE.)
+</p>
+
+<p>
+Strictly speaking, MIDI is unrelated to audio. But since MIDI is commonly used with
+music, this article is placed in the audio section.
+</p>
+
+<h2 id="for-android">MIDI for Android</h2>
+
+<p>
+Android 3.1 and later support
+<a href="http://en.wikipedia.org/wiki/USB_On-The-Go">USB On-The-Go</a>,
+which permits an Android device to act as USB host to drive USB
+peripherals. The USB host mode APIs introduced in Android 3.1 permit
+developers to implement MIDI over USB at the application level, but until
+recently there have been no built-in platform APIs for MIDI.
+</p>
+
+<p>
+Beginning with the Android M release, device makers can enable optional MIDI support in the platform.
+Supported transports include USB, draft BLE, and virtual (inter-app).
+</p>
+
+<p>
+For details on application programming with the new MIDI APIs,
+first download the
+<a href="https://developer.android.com/preview/download.html#docs">preview reference</a>
+and then see the <code>android.media.midi</code> package.
+</p>
+
+<p>
+The remainder of this article discusses how an Android device maker can
+enable MIDI support in the platform.
+</p>
+
+<h2 id="transport">Enabling transports</h2>
+
+<h3 id="usb-host">USB host mode</h3>
+
+<p>
+To enable MIDI for USB host mode, first support USB host mode in general, and
+then enable <code>CONFIG_SND_RAWMIDI</code> in your kernel configuration.
+</p>
+
+<h3 id="usb-peripheral">USB peripheral mode</h3>
+
+<p>
+To enable MIDI for USB peripheral mode, you may need to apply patches
+to your Linux kernel to integrate the
+<code>drivers/usb/gadget/f_midi.c</code> into the USB gadget
+driver. As of this writing, these patches are available for Linux kernel version
+3.10. These patches have not yet been updated for
+<a href="http://en.wikipedia.org/wiki/Configfs">ConfigFs</a>
+(a new architecture
+for USB gadget drivers), nor are they merged at upstream
+<a href="http://kernel.org"</a>kernel.org</a>.
+</p>
+
+<p>
+The patches are shown in commit order for the <code>tegra</code> tree:
+</p>
+<ol>
+<li><a href="https://android.googlesource.com/kernel/tegra/+/261230ce54cfc119efe643fc1d128e431d1678d3"</a>261230ce54cfc119efe643fc1d128e431d1678d3</a></li>
+<li><a href="https://android.googlesource.com/kernel/tegra/+/3f048135f3028e503d9d6e32b602e362bd9f374f"</a>3f048135f3028e503d9d6e32b602e362bd9f374f</a></li>
+<li><a href="https://android.googlesource.com/kernel/tegra/+/ae2019d83ecf14454315240c16dc3136212f0da2"</a>ae2019d83ecf14454315240c16dc3136212f0da2</a></li>
+</ol>
+
+<p>
+In addition, the end user must also check the box for MIDI
+in the <em>Settings</em> dialog for <em>Select USB configuration</em>,
+or by pulling down from the top of screen while attached
+to the USB host, and choosing <strong>MIDI</strong> for "Use USB for ...".
+</p>
+
+<h3 id="ble">BLE</h3>
+
+<p>
+MIDI over BLE is always enabled.
+As this transport is in draft status, it is subject to change.
+</p>
+
+<h3 id="virtual">Virtual (inter-app)</h3>
+
+<p>
+The virtual (inter-app) transport is always enabled.
+</p>
+
+<h2 id="claim-feature">Claiming the feature</h2>
+
+<p>
+Applications can screen for the presence of MIDI support using the
+<code>android.software.midi</code> feature.
+</p>
+
+<p>
+To claim MIDI support, add this line to your <code>device.mk</code>:
+</p>
+<pre>
+PRODUCT_COPY_FILES += \
+frameworks/native/data/etc/android.software.midi.xml:system/etc/permissions/android.software.midi.xml
+</pre>
+
+<p>
+See the
+<a href="{@docRoot}compatibility/android-cdd.pdf">Android Compatibility Definition Document (CDD)</a>
+for information
+on requirements to claim the feature.
+</p>
+
+<h2 id="hostDebugging">Debugging while in host mode</h2>
+
+<p>
+While in USB host mode, Android Debug Bridge (adb) debugging over USB is unavailable.
+See section <a href="http://developer.android.com/tools/help/adb.html#wireless">Wireless usage</a>
+of
+<a href="http://developer.android.com/tools/help/adb.html">Android Debug Bridge</a>
+for an alternative.
+</p>
diff --git a/src/devices/devices_toc.cs b/src/devices/devices_toc.cs
index 45ddd70..10a5dbb 100644
--- a/src/devices/devices_toc.cs
+++ b/src/devices/devices_toc.cs
@@ -46,11 +46,13 @@
               <li><a href="<?cs var:toroot ?>devices/audio/testing_circuit.html">Light Testing Circuit</a></li>
               <li><a href="<?cs var:toroot ?>devices/audio/loopback.html">Audio Loopback Dongle</a></li>
               <li><a href="<?cs var:toroot ?>devices/audio/latency_measurements.html">Measurements</a></li>
+              <li><a href="<?cs var:toroot ?>devices/audio/latency_app.html">Applications</a></li>
             </ul>
           </li>
           <li><a href="<?cs var:toroot ?>devices/audio/avoiding_pi.html">Priority Inversion</a></li>
           <li><a href="<?cs var:toroot ?>devices/audio/src.html">Sample Rate Conversion</a></li>
           <li><a href="<?cs var:toroot ?>devices/audio/debugging.html">Debugging</a></li>
+          <li><a href="<?cs var:toroot ?>devices/audio/midi.html">MIDI</a></li>
           <li><a href="<?cs var:toroot ?>devices/audio/usb.html">USB Digital Audio</a></li>
           <li><a href="<?cs var:toroot ?>devices/audio/tv.html">TV Audio</a></li>
         </ul>
@@ -215,6 +217,21 @@
       </li>
 
       <li class="nav-section">
+        <div class="nav-section-header">
+          <a href="<?cs var:toroot ?>devices/tech/admin/index.html">
+          <span class="en">Device Administration</span></a>
+        </div>
+        <ul>
+          <li><a href="<?cs var:toroot ?>devices/tech/admin/implement.html">Implementation</a></li>
+          <li><a href="<?cs var:toroot ?>devices/tech/admin/multi-user.html">Multiple Users</a></li>
+          <li><a href="<?cs var:toroot ?>devices/tech/admin/managed-profiles.html">Managed Profiles</a></li>
+          <li><a href="<?cs var:toroot ?>devices/tech/admin/provision.html">Provisioning</a></li>
+          <li><a href="<?cs var:toroot ?>devices/tech/admin/multiuser-apps.html">Multiuser Apps</a></li>
+          <li><a href="<?cs var:toroot ?>devices/tech/admin/testing-setup.html">Testing Setup</a></li>
+        </ul>
+      </li>
+
+      <li class="nav-section">
         <div class="nav-section-header empty">
           <a href="<?cs var:toroot ?>devices/halref/index.html">
             <span class="en">HAL File Reference</span>
@@ -222,20 +239,6 @@
         </div>
       </li>
 
-      <li><a href="<?cs var:toroot ?>devices/tech/kernel.html">Kernel</a></li>
-
-      <li class="nav-section">
-        <div class="nav-section-header">
-            <a href="<?cs var:toroot ?>devices/tech/ram/index.html">
-              <span class="en">RAM</span>
-            </a>
-        </div>
-        <ul>
-          <li><a href="<?cs var:toroot ?>devices/tech/ram/low-ram.html">Low RAM</a></li>
-          <li><a href="<?cs var:toroot ?>devices/tech/ram/procstats.html">Viewing RAM Usage Data</a></li>
-        </ul>
-      </li>
-
       <li class="nav-section">
         <div class="nav-section-header">
             <a href="<?cs var:toroot ?>devices/tech/ota/index.html">
@@ -251,14 +254,12 @@
         </ul>
       </li>
 
-      <li><a href="<?cs var:toroot ?>devices/tech/netstats.html">Viewing Network Data</a></li>
-
       <li class="nav-section">
         <div class="nav-section-header">
           <a href="<?cs var:toroot ?>devices/tech/power/index.html"><span class="en">Power</span></a>
         </div>
         <ul>
-          <li><a href="<?cs var:toroot ?>devices/tech/power/batterystats.html">Viewing Battery Usage Data</a></li>
+          <li><a href="<?cs var:toroot ?>devices/tech/power/batterystats.html">Battery Usage Data</a></li>
         </ul>
       </li>
 
@@ -331,6 +332,29 @@
           </ul>
         </li>
       </ul>
+
+      <li class="nav-section">
+        <div class="nav-section-header">
+            <a href="<?cs var:toroot ?>devices/tech/resources.html">
+              <span class="en">System Resources</span>
+            </a>
+        </div>
+        <ul>
+          <li><a href="<?cs var:toroot ?>devices/tech/kernel.html">Kernel Configuration</a></li>
+          <li><a href="<?cs var:toroot ?>devices/tech/netstats.html">Network Usage Data</a></li>
+          <li class="nav-section">
+            <div class="nav-section-header">
+                <a href="<?cs var:toroot ?>devices/tech/ram/index.html">
+                  <span class="en">RAM</span>
+                </a>
+            </div>
+            <ul>
+              <li><a href="<?cs var:toroot ?>devices/tech/ram/low-ram.html">Low RAM Configuration</a></li>
+              <li><a href="<?cs var:toroot ?>devices/tech/ram/procstats.html">RAM Usage Data</a></li>
+            </ul>
+          </li>
+        </ul>
+
       <li class="nav-section">
         <div class="nav-section-header">
           <a href="<?cs var:toroot ?>devices/tech/test_infra/tradefed/index.html">
diff --git a/src/devices/input/getevent.jd b/src/devices/input/getevent.jd
index 8bf4093..fd39dbb 100644
--- a/src/devices/input/getevent.jd
+++ b/src/devices/input/getevent.jd
@@ -2,7 +2,7 @@
 @jd:body
 
 <!--
-    Copyright 2013 The Android Open Source Project
+    Copyright 2015 The Android Open Source Project
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
@@ -16,6 +16,14 @@
     See the License for the specific language governing permissions and
     limitations under the License.
 -->
+<div id="qv-wrapper">
+  <div id="qv">
+    <h2>In this document</h2>
+    <ol id="auto-toc">
+    </ol>
+  </div>
+</div>
+
 <p>The <code>getevent</code> tool runs on the device and provides information about input
 devices and a live dump of kernel input events.</p>
 <p>It is very useful tool for ensuring that device drivers are reporing the
diff --git a/src/devices/input/input-device-configuration-files.jd b/src/devices/input/input-device-configuration-files.jd
index 877053c..ffe9ba4 100644
--- a/src/devices/input/input-device-configuration-files.jd
+++ b/src/devices/input/input-device-configuration-files.jd
@@ -2,7 +2,7 @@
 @jd:body
 
 <!--
-    Copyright 2013 The Android Open Source Project
+    Copyright 2015 The Android Open Source Project
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
@@ -16,6 +16,14 @@
     See the License for the specific language governing permissions and
     limitations under the License.
 -->
+<div id="qv-wrapper">
+  <div id="qv">
+    <h2>In this document</h2>
+    <ol id="auto-toc">
+    </ol>
+  </div>
+</div>
+
 <p>Input device configuration files (<code>.idc</code> files) contain device-specific
 configuration properties that affect the behavior of input devices.</p>
 <p>Input device configuration files are typically not necessary for standard
diff --git a/src/devices/input/key-character-map-files.jd b/src/devices/input/key-character-map-files.jd
index 6872cdb..d485707 100644
--- a/src/devices/input/key-character-map-files.jd
+++ b/src/devices/input/key-character-map-files.jd
@@ -2,7 +2,7 @@
 @jd:body
 
 <!--
-    Copyright 2013 The Android Open Source Project
+    Copyright 2015 The Android Open Source Project
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
@@ -16,6 +16,14 @@
     See the License for the specific language governing permissions and
     limitations under the License.
 -->
+<div id="qv-wrapper">
+  <div id="qv">
+    <h2>In this document</h2>
+    <ol id="auto-toc">
+    </ol>
+  </div>
+</div>
+
 <p>Key character map files (<code>.kcm</code> files) are responsible for mapping combinations
 of Android key codes with modifiers to Unicode characters.</p>
 <p>Device-specific key layout files are <em>required</em> for all internal (built-in)
diff --git a/src/devices/input/key-layout-files.jd b/src/devices/input/key-layout-files.jd
index d353d08..2b7cd53 100644
--- a/src/devices/input/key-layout-files.jd
+++ b/src/devices/input/key-layout-files.jd
@@ -2,7 +2,7 @@
 @jd:body
 
 <!--
-    Copyright 2013 The Android Open Source Project
+    Copyright 2015 The Android Open Source Project
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
@@ -16,6 +16,14 @@
     See the License for the specific language governing permissions and
     limitations under the License.
 -->
+<div id="qv-wrapper">
+  <div id="qv">
+    <h2>In this document</h2>
+    <ol id="auto-toc">
+    </ol>
+  </div>
+</div>
+
 <p>Key layout files (<code>.kl</code> files) are responsible for mapping Linux key codes
 and axis codes to Android key codes and axis codes and specifying associated
 policy flags.</p>
diff --git a/src/devices/input/keyboard-devices.jd b/src/devices/input/keyboard-devices.jd
index 74bafaa..267ae42 100644
--- a/src/devices/input/keyboard-devices.jd
+++ b/src/devices/input/keyboard-devices.jd
@@ -2,7 +2,7 @@
 @jd:body
 
 <!--
-    Copyright 2013 The Android Open Source Project
+    Copyright 2015 The Android Open Source Project
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
@@ -16,6 +16,14 @@
     See the License for the specific language governing permissions and
     limitations under the License.
 -->
+<div id="qv-wrapper">
+  <div id="qv">
+    <h2>In this document</h2>
+    <ol id="auto-toc">
+    </ol>
+  </div>
+</div>
+
 <p>Android supports a variety of keyboard devices including special function
 keypads (volume and power controls), compact embedded QWERTY keyboards,
 and fully featured PC-style external keyboards.</p>
diff --git a/src/devices/input/overview.jd b/src/devices/input/overview.jd
index 118fabf..11cdf97 100644
--- a/src/devices/input/overview.jd
+++ b/src/devices/input/overview.jd
@@ -2,7 +2,7 @@
 @jd:body
 
 <!--
-    Copyright 2013 The Android Open Source Project
+    Copyright 2015 The Android Open Source Project
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
@@ -16,6 +16,14 @@
     See the License for the specific language governing permissions and
     limitations under the License.
 -->
+<div id="qv-wrapper">
+  <div id="qv">
+    <h2>In this document</h2>
+    <ol id="auto-toc">
+    </ol>
+  </div>
+</div>
+
 <p>The Android input subsystem nominally consists of an event pipeline
 that traverses multiple layers of the system.</p>
 <h2 id="input-pipeline">Input Pipeline</h2>
diff --git a/src/devices/input/touch-devices.jd b/src/devices/input/touch-devices.jd
index 298ba15..bb78d35 100644
--- a/src/devices/input/touch-devices.jd
+++ b/src/devices/input/touch-devices.jd
@@ -2,7 +2,7 @@
 @jd:body
 
 <!--
-    Copyright 2013 The Android Open Source Project
+    Copyright 2015 The Android Open Source Project
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
@@ -16,6 +16,14 @@
     See the License for the specific language governing permissions and
     limitations under the License.
 -->
+<div id="qv-wrapper">
+  <div id="qv">
+    <h2>In this document</h2>
+    <ol id="auto-toc">
+    </ol>
+  </div>
+</div>
+
 <p>Android supports a variety of touch screens and touch pads, including
 stylus-based digitizer tablets.</p>
 <p>Touch screens are touch devices that are associated with a display such that
diff --git a/src/devices/input/validate-keymaps.jd b/src/devices/input/validate-keymaps.jd
index 6a907a1..4a099d4 100644
--- a/src/devices/input/validate-keymaps.jd
+++ b/src/devices/input/validate-keymaps.jd
@@ -2,7 +2,7 @@
 @jd:body
 
 <!--
-    Copyright 2013 The Android Open Source Project
+    Copyright 2015 The Android Open Source Project
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
@@ -16,6 +16,14 @@
     See the License for the specific language governing permissions and
     limitations under the License.
 -->
+<div id="qv-wrapper">
+  <div id="qv">
+    <h2>In this document</h2>
+    <ol id="auto-toc">
+    </ol>
+  </div>
+</div>
+
 <p>The Android framework has a small tool called <code>validatekeymaps</code> to validate the
 syntax of input device configuration files, key layout files, key character
 maps files and virtual key definition files.</p>
diff --git a/src/devices/storage/config-example.jd b/src/devices/storage/config-example.jd
index 347d8d5..fd55db8 100644
--- a/src/devices/storage/config-example.jd
+++ b/src/devices/storage/config-example.jd
@@ -2,7 +2,7 @@
 @jd:body
 
 <!--
-    Copyright 2013 The Android Open Source Project
+    Copyright 2015 The Android Open Source Project
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
@@ -16,6 +16,13 @@
     See the License for the specific language governing permissions and
     limitations under the License.
 -->
+<div id="qv-wrapper">
+  <div id="qv">
+    <h2>In this document</h2>
+    <ol id="auto-toc">
+    </ol>
+  </div>
+</div>
 
 <p>Below are examples of external storage configurations as of Android 4.4
 for various typical devices. Only the relevant portions of the configuration
diff --git a/src/devices/storage/index.jd b/src/devices/storage/index.jd
index e8786ec..894e85b 100644
--- a/src/devices/storage/index.jd
+++ b/src/devices/storage/index.jd
@@ -16,6 +16,13 @@
     See the License for the specific language governing permissions and
     limitations under the License.
 -->
+<div id="qv-wrapper">
+  <div id="qv">
+    <h2>In this document</h2>
+    <ol id="auto-toc">
+    </ol>
+  </div>
+</div>
 
 <img style="float: right; margin: 0px 15px 15px 15px;" src="images/ape_fwk_hal_extstor.png" alt="Android external storage HAL icon"/>
 
diff --git a/src/devices/tech/admin/images/multi-user-perms.png b/src/devices/tech/admin/images/multi-user-perms.png
new file mode 100644
index 0000000..f955ddc
--- /dev/null
+++ b/src/devices/tech/admin/images/multi-user-perms.png
Binary files differ
diff --git a/src/devices/tech/admin/implement.jd b/src/devices/tech/admin/implement.jd
new file mode 100644
index 0000000..03ce93c
--- /dev/null
+++ b/src/devices/tech/admin/implement.jd
@@ -0,0 +1,147 @@
+page.title=Implementing Device Administration
+@jd:body
+
+<!--
+    Copyright 2015 The Android Open Source Project
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+-->
+<div id="qv-wrapper">
+  <div id="qv">
+    <h2>In this document</h2>
+    <ol id="auto-toc">
+    </ol>
+  </div>
+</div>
+
+<p>This page walks you through the many features in Android 5.0 and higher
+platform release that need to be enabled and validated on devices to make them
+ready for managed profile and device owner user cases that are essential to using
+them in a corporate environment. In addition to the related Android Open Source
+Project (AOSP) code, there are a number of additional components required for a
+device to function with managed profiles.</p>
+
+<h2 id=requirements>Requirements</h2>
+
+<p>The following uses-feature need to be defined:</p>
+
+<pre>
+android.software.managed_users
+android.software.device_admin
+</pre>
+
+<p>Confirm with: <code>adb shell pm list features</code></p>
+
+<p>It should not be a low-RAM device, meaning <code>ro.config.low_ram</code>
+should not be defined. The framework automatically limits the number of users
+to 1 when the <code>low_ram</code> flag is defined.</p>
+
+<p>By default, only applications that are essential for correct operation of the
+profile should be enabled as part of provisioning a managed device.</p>
+
+<p>OEMs must ensure the managed profile or device has all required applications by
+modifying:</p>
+
+<pre>
+vendor_required_apps_managed_profile.xml
+vendor_required_apps_managed_device.xml
+</pre>
+
+<p>Here are examples from a Nexus device:</p>
+
+<code>packages/apps/ManagedProvisioning/res/values/vendor_required_apps_managed_device.xml</code>
+
+<pre>
+&lt;resources&gt;
+  &lt;!-- A list of apps to be retained on the managed device --&gt;
+  &lt;string-array name="vendor_required_apps_managed_device"&gt;
+    &lt;item&gt;com.android.vending&lt;/item&gt; &lt;!--­Google Play --&gt;
+    &lt;item&gt;com.google.android.gms&lt;/item&gt; &lt;!--­Required by Play --&gt;
+    &lt;item&gt;com.google.android.contacts&lt;/item&gt; &lt;!--­Google or OEM Contacts­--&gt;
+    &lt;item&gt;com.google.android.googlequicksearchbox&lt;/item&gt; &lt;!--­Google Launcher --&gt;
+    &lt;item&gt;com.google.android.launcher&lt;/item&gt; &lt;!--­Google Launcher or OEM Launcher --&gt;
+    &lt;item&gt;com.google.android.dialer&lt;/item&gt; &lt;!--­Google or OEM dialer to enable making phone calls --&gt;
+  &lt;/string-array&gt;
+&lt;/resources&gt;
+</pre>
+
+<code>
+packages/apps/ManagedProvisioning/res/values/vendor_required_apps_managed_profile.xml
+</code>
+
+<pre>
+&lt;resources&gt;
+    &lt;!-- A list of apps to be retained in the managed profile. This includes any Google experience apps required. --&gt;
+    &lt;string-array name="vendor_required_apps_managed_profile"&gt;
+        &lt;item&gt;com.android.vending&lt;/item&gt; &lt;!-- Google Play --&gt;
+        &lt;item&gt;com.google.android.gms&lt;/item&gt; &lt;!-- Required by Play --&gt;
+        &lt;item&gt;com.google.android.contacts&lt;/item&gt; &lt;!-- Google or OEM Contacts --&gt;
+    &lt;/string-array&gt;
+&lt;/resources&gt;
+</pre>
+
+<h3 id=launcher>Launcher</h3>
+
+<p>The launcher must support badging applications with the icon badge provided
+in the Android Open Source Project (AOSP) to represent the managed applications
+and other badge user interface elements such as recents and notifications.</p> 
+
+<p>Update the Launcher to support badging. If you use <a
+href="https://android.googlesource.com/platform/packages/apps/Launcher3/">launcher3</a>
+in AOSP as-is, then you likely already support this badging feature.
+</p>
+
+<h3 id=nfc>NFC</h3>
+
+<p>On devices with NFC, NFC must be enabled in the Android Setup Wizard and
+configured to accept managed provisioning intents:</p>
+
+<code>packages/apps/Nfc/res/values/provisioning.xml</code>
+
+<pre>
+&lt;bool name="enable_nfc_provisioning"&gt;true&lt;/bool&gt;
+&lt;item>application/com.android.managedprovisioning&lt;/item&gt;
+</pre>
+
+<h3 id=setup_wizard>Setup Wizard</h3>
+
+<p>The Android Setup Wizard needs to support device owner provisioning. When it
+opens, it needs to check if another process (such as device owner provisioning)
+has already finished the user setup. If this is the case, it needs to fire a
+home intent and finish the setup wizard. </p>
+
+<p>This intent will be caught by the provisioning application, which will then
+hand over control to the newly set device owner. This can be achieved by adding
+the following to your setup wizard’s main activity:</p>
+
+<pre>
+&#64;Override
+   protected void onStart() {
+        super.onStart();
+
+        // When returning to a setup wizard activity, check to see if another setup process
+        // has intervened and, if so, complete an orderly exit
+        boolean completed = Settings.Secure.getInt(getContentResolver(),
+                Settings.Secure.USER_SETUP_COMPLETE, 0) != 0;
+        if (completed) { 
+           startActivity(new Intent(Intent.ACTION_MAIN, null)
+                .addCategory(Intent.CATEGORY_HOME)
+                .addFlags(Intent.FLAG_ACTIVITY_NEW_TASK
+                        | Intent.FLAG_ACTIVITY_CLEAR_TASK
+                        | Intent.FLAG_ACTIVITY_RESET_TASK_IF_NEEDED));
+           finish();
+       }
+
+       ...
+   }
+</pre>
diff --git a/src/devices/tech/admin/index.jd b/src/devices/tech/admin/index.jd
new file mode 100644
index 0000000..7798355
--- /dev/null
+++ b/src/devices/tech/admin/index.jd
@@ -0,0 +1,62 @@
+page.title=Device Administration
+@jd:body
+
+<!--
+    Copyright 2015 The Android Open Source Project
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+-->
+<div id="qv-wrapper">
+  <div id="qv">
+    <h2>In this document</h2>
+    <ol id="auto-toc">
+    </ol>
+  </div>
+</div>
+
+<p>Devices running Android 5.0 and later with the managed_users feature
+declared can be used in a <a href="http://www.android.com/work/">corporate
+environment</a> under the auspices of each company’s information technology (IT)
+department. This is possible with the introduction of <a href="multi-user.html">multiple
+users</a>, <a href="managed-profiles.html">managed profiles</a>, and enterprise
+mobility management (EMM) applications, as well as enhancements to default
+<a
+href="{@docRoot}devices/tech/security/encryption/index.html">encryption</a>,
+<a
+href="{@docRoot}devices/tech/security/verifiedboot/index.html">verified
+boot</a>, and <a
+href="{@docRoot}devices/tech/security/selinux/index.html">SELinux</a>.</p>
+
+<p>With these enhancements, either users or their IT departments may create
+managed profiles that separate corporate employer data from personal user
+information. Follow the documents within this section of the site to properly
+implement corporate device administration.</p>
+
+<h2 id=summary>Summary</h2>
+
+<p>Follow this flow to employ device administration:</p>
+
+<ol>
+  <li>Gain an understanding of key concepts, such as <a
+href="multi-user.html">multiple users</a> and <a
+href="managed-profiles.html">managed profiles</a>.
+  <li><a href="implement.html">Implement device administration</a> via custom
+overlay files.
+  <li><a href="testing-setup.html">Test</a> and validate your devices with EMM providers and applications.
+</ol>
+
+<h2 id=supporting_documentation>Supporting documentation</h2>
+
+<p><a href="http://developer.android.com/guide/topics/admin/device-admin.html">Device Administration API</a></p>
+
+<p><a href="https://developer.android.com/training/enterprise/index.html">Building Apps for Work</a></p>
diff --git a/src/devices/tech/admin/managed-profiles.jd b/src/devices/tech/admin/managed-profiles.jd
new file mode 100644
index 0000000..c36510e
--- /dev/null
+++ b/src/devices/tech/admin/managed-profiles.jd
@@ -0,0 +1,170 @@
+page.title=Employing Managed Profiles
+@jd:body
+
+<!--
+    Copyright 2015 The Android Open Source Project
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+-->
+<div id="qv-wrapper">
+  <div id="qv">
+    <h2>In this document</h2>
+    <ol id="auto-toc">
+    </ol>
+  </div>
+</div>
+
+<p>A <em>managed profile</em> or <em>work profile</em> is an Android <a
+href="multi-user.html">user</a> with some additional special properties around
+management and visual aesthetic.</p>
+
+<h2 id=purpose>DevicePolicyManager APIs</h2>
+
+<p>Android 5.x or newer offers a greatly improved DevicePolicyManager with dozens of new
+APIs to support both corporate-owned and bring your own device (BYOD)
+administration use cases. Examples include app restrictions, silent
+installation of certificates, and cross-profile sharing intent access control.
+You may use the sample Device Policy Client (DPC) app, <a
+href="https://developer.android.com/samples/BasicManagedProfile/index.html">BasicManagedProfile.apk</a>,
+as a starting point. See <a
+href="https://developer.android.com/training/enterprise/work-policy-ctrl.html">Building
+a Work Policy Controller</a> for additional details.
+
+<h2 id=purpose>Purpose</h2>
+
+<p>The primary goal of a managed profile is to create a segregated and secure
+space for managed (for example, corporate) data to reside. The administrator of
+the profile has full control over scope, ingress, and egress of data as well as
+its lifetime. These policies offer great powers and therefore fall upon the
+managed profile instead of the device administrator.</p>
+
+<ul>
+  <li><strong>Creation</strong> - Managed profiles can be created by any application in the primary user. The
+user is notified of managed profile behaviors and policy enforcement before
+creation.
+  <li><strong>Management</strong> - Management is performed by applications that programmatically invoke APIs in
+the <a href="http://developer.android.com/reference/android/app/admin/DevicePolicyManager.html">DevicePolicyManager</a> class to restrict use. Such applications are referred to as <em>profile owners</em> and are defined at initial profile setup. Policies unique to managed profile
+involve app restrictions, updatability, and intent behaviors.
+  <li><strong>Visual treatment</strong> - Applications, notifications, and widgets from the managed profile are always
+badged and typically made available inline with user interface (UI) elements
+from the primary user.
+</ul>
+
+<h2 id=data_segregation>Data Segregation </h2>
+
+<h3 id=applications>Applications</h3>
+
+<p>Applications are scoped with their own segregated data when the same app exists
+in the primary user and managed profile. Generally, applications cannot
+communicate directly with one another across the profile-user boundary and act
+independently of one another.</p>
+
+<h3 id=accounts>Accounts</h3>
+
+<p>Accounts in the managed profile are distinctly unique from the primary user.
+There is no way to access credentials across the profile-user boundary. Only
+apps in their respective context are able to access their respective accounts.</p>
+
+<h3 id=intents>Intents</h3>
+
+<p>The administrator controls whether intents are resolved in/out of managed
+profile or not. Applications from the managed profile are default scoped to
+stay within the managed profile exception of the Device Policy API.</p>
+
+<h3 id=settings>Settings</h3>
+
+<p>Enforcement of settings is generally scoped to the managed profile with a few
+exceptions. Specifically, lockscreen and encryption settings are still scoped
+to the device and shared between the primary user and managed profile.
+Otherwise, a profile owner does not have any device administrator privileges
+outside the managed profile.</p>
+
+<p>Managed profiles are implemented as a new kind of secondary user, such that:</p>
+
+<pre>
+uid = 10000 * userid + appid
+</pre>
+
+
+<p>They have separate app data like regular users:</p>
+
+<pre>
+/data/user/&lt;userid&gt;
+</pre>
+
+<p>The UserId is calculated for all system requests using <code>Binder.getCallingUid()</code>, and all system state and responses are separated by userId. You may consider
+instead using <code>Binder.getCallingUserHandle</code> rather than <code>getCallingUid</code> to avoid confusion between uid and userId.</p>
+
+<p>The AccountManagerService maintains a separate list of accounts for each user.</p>
+
+<p>The main differences between a managed profile and a regular secondary user are
+as follows:</p>
+
+<ul>
+  <li> The managed profile is associated with its parent user and started alongside
+the primary user at boot time.
+  <li> Notifications for managed profiles are enabled by ActivityManagerService
+allowing the managed profile to share the activity stack with the primary user.
+  <li> Some other system services shared are: IME, A11Y services, Wi-Fi, and NFC.
+  <li> New Launcher APIs allow launchers to display badged apps and whitelisted
+widgets from the managed profile alongside apps in the primary profile without
+switching users.
+</ul>
+
+<h2 id=device_administration>Device administration</h2>
+
+<p>Android device administration includes two new types of device administrators for
+enterprises:</p>
+
+<ul>
+  <li><em>Profile owner</em>—Designed for bring your own device (BYOD) environments
+  <li><em>Device Owner</em>—Designed for corp-liable environments
+</ul>
+
+<p>The majority of the new device administrator APIs that have been added for
+Android 5.0 are available only to profile or device owners. Traditional device
+administrators remain but are applicable to the simpler consumer-only case
+(e.g. find my device).</p>
+
+<h3 id=profile_owners>Profile owners</h3>
+
+<p>A Device Policy Client (DPC) app typically functions as the profile owner. The
+DPC app is typically provided by an enterprise mobility management (EMM)
+partner, such as Google Apps Device Policy.</p>
+
+<p>The profile owner app creates a managed profile on the device by sending the
+<code>ACTION_PROVISION_MANAGED_PROFILE</code> intent. This profile is
+distinguished by the appearance of badged instances of
+apps, as well as personal instances. That badge, or Android device
+administration icon, identifies which apps are work apps.</p>
+
+<p>The EMM has control only over the managed profile (not personal space) with some
+exceptions, such as enforcing the lock screen.</p>
+
+<h3 id=device_owners>Device owners</h3>
+
+<p>The device owner can be set only in an unprovisioned device:</p>
+
+<ul>
+  <li>Can be provisioned only at initial device setup
+  <li>Enforced disclosure always displayed in quick-settings
+</ul>
+
+<p>Device owners can conduct some tasks profile owners cannot, and here are a few examples:</p>
+
+<ul>
+  <li>Wipe device data
+  <li>Disable Wi-Fi/ BT
+  <li>Control <code>setGlobalSetting</code>
+  <li><code>setLockTaskPackages</code> (the ability to whitelist packages that can pin themselves to the foreground)
+</ul>
diff --git a/src/devices/tech/admin/multi-user.jd b/src/devices/tech/admin/multi-user.jd
new file mode 100644
index 0000000..8319be0
--- /dev/null
+++ b/src/devices/tech/admin/multi-user.jd
@@ -0,0 +1,162 @@
+page.title=Supporting Multiple Users
+@jd:body
+
+<!--
+    Copyright 2015 The Android Open Source Project
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+-->
+<div id="qv-wrapper">
+  <div id="qv">
+    <h2>In this document</h2>
+    <ol id="auto-toc">
+    </ol>
+  </div>
+</div>
+
+<p>This document describes the Android multi-user feature. It allows more than one
+user on a single Android device by separating their accounts and application
+data. For instance, parents may let their children use the family tablet. Or a
+critical team might share a mobile device for on-call duty.</p>
+
+<h1 id=definitions>Definitions</h1>
+
+<p>Before supporting multiple Android users, you should understand the basic
+concepts involved. Here are the primary terms used when describing Android
+users and accounts:</p>
+
+<ul>
+  <li><em>User</em> - Each user is intended to be used by a different physical person. Each user
+has distinct application data and some unique settings, as well as a user
+interface to explicitly switch between users. A user can run in the background
+when another user is active; the system manages shutting down users to conserve
+resources when appropriate. Secondary users can be created either directly via
+the primary user interface or from a <a
+href="https://developer.android.com/guide/topics/admin/device-admin.html">Device
+Administration</a> application.
+  <li><em>Account</em> - Accounts are contained within a user but are not defined by a user. Nor is a
+user defined by or linked to any given account. Users and profiles contain
+their own unique accounts but are not required to have accounts to be
+functional. The list of accounts differs by user. See the <a href="https://developer.android.com/reference/android/accounts/Account.html">Account class</a> definition.
+  <li><em>Profile<strong></em> </strong>- A profile has separated app data but shares some system-wide settings (for
+example, Wi-Fi and Bluetooth). A profile is a subset of and tied to the
+existence of a user. A user can have multiple profiles. They are created
+through a <a href="https://developer.android.com/guide/topics/admin/device-admin.html">Device
+Administration</a> application. A profile always has an immutable
+association to a ‘parent’ user, defined by the user that created the profile.
+Profiles do not live beyond the lifetime of the creating user.
+  <li><em>App</em> - An application’s data exists within each associated user. App data is
+sandboxed from other applications within the same user. Apps within the same
+user can interact with each other via IPC. See <a href="https://developer.android.com/training/enterprise/index.html">Building Apps for Work</a>.
+</ul>
+
+<h2 id=user_types>User types</h2>
+
+<ul>
+  <li><em>Primary</em> - The first user added to a device. The primary user cannot be removed except
+by factory reset. This user also has some special privileges and settings only
+it can set. The primary user is always running even when other users are in the
+foreground.
+  <li><em>Secondary</em> - Any user added to the device other than the primary user. They can be
+removed by either themselves or the primary user and cannot impact other users
+on a device. Secondary users can run in the background and will continue to
+have network connectivity when they do.
+  <li><em>Guest<strong></em> </strong>- A guest user is a temporary secondary user with an explicit option to quick
+delete the guest user when its usefulness is over. There can be only one guest
+user at a time.
+</ul>
+
+<h2 id=profile_types>Profile types</h2>
+
+<ul>
+  <li><em>Managed<strong></em> </strong>- Managed profiles are created by an application to contain work data and
+apps. They are managed exclusively by the ‘profile owner’, the app who created
+the corp profile. Launcher, notifications and recent tasks are shared by the
+primary user and the corp profile.
+  <li><em>Restricted</em> - Restricted profiles use the accounts based off the primary user. The Primary
+user can control what apps are available on the restricted profile. Restricted
+profiles are available only on tablets.
+</ul>
+
+<h1 id=effects>Effects</h1>
+
+<p>When users are added to a device, some functionality will be curtailed when
+another user is in the foreground. Since app data is separated by user, the
+state of those apps differs by user. For example, email destined for an account
+of a user not currently in focus won’t be available until that user and account
+are active on the device.</p>
+
+<p>The default state is only the primary user has full access to phone calls and
+texts. The secondary user may receive inbound calls but cannot send or receive
+texts. The primary user must enable these functions for others.</p>
+
+ <p class="note"><strong>Note</strong>: To enable or disable the phone and SMS functions for a secondary user, go to
+Settings > Users, select the user, and switch the <em>Allow phone calls and SMS</em> setting to off.</p>
+
+<p>Please note, some restrictions exist when a secondary user is in background.
+For instance, the background secondary user will not be able to display the
+user interface or make Bluetooth services active. Finally, background secondary
+users will be halted by the system process if the device needs additional
+memory for operations in the foreground user.</p>
+
+<p>Here are aspects of behavior to keep in mind when employing multiple users on
+an Android device:</p>
+
+<ul>
+  <li>Notifications appear for all accounts of a single user at once.
+  <li>Notifications for other users do not appear until they are active.
+  <li>Each user gets his or her own workspace to install and place apps.
+  <li>No user has access to the app data of another user.
+  <li>Any user can affect the installed apps for all users.
+  <li>The primary user can remove apps or even the entire workspace established by
+secondary users.
+</ul>
+
+<h1 id=implementation>Implementation</h1>
+
+<h2 id=managing_users>Managing users</h2>
+
+<p>Management of users and profiles (with the exception of restricted profiles) is
+performed by applications that programmatically invoke API in the <code>DevicePolicyManager</code> class to restrict use.</p>
+
+<p>Schools and enterprises may employ users and profiles to manage the lifetime
+and scope of apps and data on devices. They may use the types outlined above in
+conjunction with the <a href="http://developer.android.com/reference/android/os/UserManager.html">UserManager API</a> to build unique solutions tailored to their use cases.</p>
+
+<h2 id=applying_the_overlay>Applying the overlay</h2>
+
+<p>The multi-user feature is disabled by default in the Android 5.0 release. To
+enable it, device manufacturers must define a resource overlay that replaces
+the following values in frameworks/base/core/res/res/values/config.xml:</p>
+
+<pre>
+&lt;!--  Maximum number of supported users --&gt;
+&lt;integer name="config_multiuserMaximumUsers"&gt;1&lt;/integer&gt;
+&lt;!--  Whether Multiuser UI should be shown --&gt;
+&lt;bool name="config_enableMultiUserUI"&gt;false&lt;/bool&gt;
+</pre>
+
+<p>To apply this overlay and enable guest and secondary users on the device, use the
+<code>DEVICE_PACKAGE_OVERLAYS</code> feature of the Android build system to:</p>
+
+<ul>
+  <li> Replace the value for <code>config_multiuserMaximumUsers</code> with one greater than 1
+  <li> Replace the value of <code>config_enableMultiUserUI</code> with: <code>true</code>
+</ul>
+
+<p>Device manufacturers may decide upon the maximum number of users.</p>
+
+<p>That said, if device manufacturers or others have modified settings, they need
+to ensure SMS and telephony work as defined in the <a
+href="{@docRoot}compatibility/android-cdd.pdf">Android Compatibility Definition
+Document</a> (CDD).</p>
diff --git a/src/devices/tech/admin/multiuser-apps.jd b/src/devices/tech/admin/multiuser-apps.jd
new file mode 100644
index 0000000..6577bcf
--- /dev/null
+++ b/src/devices/tech/admin/multiuser-apps.jd
@@ -0,0 +1,104 @@
+page.title=Building Multiuser-Aware Apps
+@jd:body
+
+<!--
+    Copyright 2015 The Android Open Source Project
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+-->
+<div id="qv-wrapper">
+  <div id="qv">
+    <h2>In this document</h2>
+    <ol id="auto-toc">
+    </ol>
+  </div>
+</div>
+
+<p>When a device supports <a href="multi-user.html">multiple users</a>, its apps must be made aware of these distinct users.</p>
+
+<p>Certain apps need to have some components run as singletons and can accept
+requests from any user. Only system apps can currently use this feature.</p>
+
+<p>This facility:</p>
+
+<ul>
+  <li>Conserves resources
+  <li>Arbitrates one or more shared resources across users
+  <li>Reduces network overhead by using a single server connection
+</ul>
+
+<p>See the diagram below for a depiction of permissions flow with multiple users.</p>
+
+<p><img src="images/multi-user-perms.png" alt="Multiple users permissions flow" />
+<p class="img-caption"><strong>Figure 1.</strong> Multiple users permissions</p>
+
+<h2 id=enabling_a_singleton_component>Enabling a singleton component</h2>
+
+<p>To identify an app as a singleton, Add <code>android:singleUser=”true”</code> to your service or provider in the Android manifest.</p>
+
+<p>The system will instantiate that component in the process running as user 0
+only. Any requests to connect to that provider or service from any user will be
+routed to the process in user 0. If this is the only component in your app,
+only one instance of your app will run.</p>
+
+<p>Activities in your package will still be launched in a separate process for
+each user, with the UID being in the UID range for that user (such as 1010034).</p>
+
+<h2 id=interacting_with_users>Interacting with users</h2>
+
+<h3 id=perms_required>Set permissions</h3>
+
+<p>These permissions are required</p>
+
+<pre>
+INTERACT_ACROSS_USERS (signature|system)
+INTERACT_ACROSS_USERS_FULL (signature)
+</pre>
+
+<h3 id=apis>Employ APIs</h3>
+
+<p>Use the following APIs to make apps aware of multiple users.</p>
+
+<ol>
+  <li> Extract the user handle from incoming Binder calls:
+  <ul>
+    <li> <code>int userHandle = UserHandle.getCallingUserId()</code>
+  </ul>
+  <li> Use new, protected APIs to start services, activities, broadcasts on a specific
+user: 
+  <ul>
+    <li><code>Context.startActivityAsUser(Intent, UserHandle)</code>
+    <li><code>Context.bindServiceAsUser(Intent, …, UserHandle)</code>
+    <li><code>Context.sendBroadcastAsUser(Intent, … , UserHandle)</code>
+    <li><code>Context.startServiceAsUser(Intent, …, UserHandle)
+UserHandle</code> can be an explicit user or one of the special handles: <code>UserHandle.CURRENT</code> or <code>UserHandle.ALL</code>. <code>CURRENT</code> indicates the user that is currently in the foreground. You can use <code>ALL</code> when you want to send a broadcast to all users.
+  </ul>
+  <li>Communicate with components in your own app:
+<code>(INTERACT_ACROSS_USERS)</code>
+Or with components in other apps:
+<code>(INTERACT_ACROSS_USERS_FULL)</code>
+  <li>You may need to create proxy components that run in the user’s process that
+then access the <code>singleUser</code> component in user 0.
+  <li>Query users and their handles with the new <code>UserManager</code> system service:
+  <ul>
+    <li><code>UserManager.getUsers()</code>
+    <li><code>UserManager.getUserInfo()</code>
+    <li><code>UserManager.supportsMultipleUsers()</code>
+    <li><code>UserManager.getUserSerialNumber(int userHandle)</code> - a non-recycled number that corresponds to a user handle.
+    <li><code>UserManager.getUserHandle(int serialNumber)</code>
+    <li><code>UserManager.getUserProfiles() </code>- returns the collection of self and managed profiles, if any.
+  </ul>
+  <li>Register to listen to specific or all users and the callbacks with new APIs on
+ContentObserver, PackageMonitor, BroadcastReceiver that provide additional
+information about which user has caused the callback.
+</ol>
diff --git a/src/devices/tech/admin/provision.jd b/src/devices/tech/admin/provision.jd
new file mode 100644
index 0000000..62b898e
--- /dev/null
+++ b/src/devices/tech/admin/provision.jd
@@ -0,0 +1,168 @@
+page.title=Provisioning for Device Administration
+@jd:body
+
+<!--
+    Copyright 2015 The Android Open Source Project
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+-->
+<div id="qv-wrapper">
+  <div id="qv">
+    <h2>In this document</h2>
+    <ol id="auto-toc">
+    </ol>
+  </div>
+</div>
+
+<p>This page describes the process for deploying devices to corporate users.</p>
+
+<p>Device owner provisioning can be accomplished over NFC or with an activation
+code. See <a href="implement.html">Implementing Device Administration</a> for
+the complete list of requirements.</p>
+
+<p>Download the <a
+href="https://github.com/googlesamples/android-NfcProvisioning">NfcProvisioning
+APK</a> and <a
+href="https://github.com/googlesamples/android-DeviceOwner">Android-DeviceOwner
+APK</a>.</p>
+
+<h2 id=managed_provisioning>Managed Provisioning</h2>
+
+<p>Managed Provisioning is a framework UI flow to ensure users are adequately
+informed of the implications of setting a device owner or managed profile. You can
+think of it as a setup wizard for managed profiles.</p>
+
+<p class="note"><strong>Note:</strong> Remember, the device owner can be set
+only from an unprovisioned device. If
+<code>Settings.Secure.USER_SETUP_COMPLETE</code> has ever been set, then the
+device is considered provisioned & device owner cannot be set.</p>
+
+<p>Please note, devices that enable default encryption offer considerably
+simpler/quicker device administration provisioning flow. The managed provisioning
+component:</p>
+
+<ul>
+  <li>Encrypts the device</li>
+  <li>Creates the managed profile</li>
+  <li>Disables non-required applications</li>
+  <li>Sets the enterprise mobility management (EMM) app as profile owner</li>
+</ul>
+
+<p>In turn, the EMM app:</p>
+
+<ul>
+  <li>Adds user accounts</li>
+  <li>Enforces device compliance</li>
+  <li>Enables any additional system applications</li>
+</ul>
+
+<p>In this flow, managed provisioning triggers device encryption. The framework
+  copies the EMM app into the managed profile as part of managed provisioning.
+  The instance of the EMM app inside of the managed profile gets a callback from the
+framework when provisioning is done.</p>
+
+<p>The EMM can then add accounts and enforce policies; it then calls
+<code>setProfileEnabled()</code>, which makes the launcher icons visible.</p>
+
+<h2 id=profile_owner_provisioning>Profile Owner Provisioning</h2>
+
+<p>Profile owner provisioning assumes the user of the device oversees its
+management (and not a company IT department). To enable, profile owner
+provisioning, you must send an intent with appropriate extras. See the <a href="https://developer.android.com/samples/BasicManagedProfile/index.html">BasicManagedProfile.apk</a> for an example.</p>
+
+<p>Mobile Device Management (MDM) applications trigger the creation of the managed
+profile by sending an intent with action:</p>
+
+<p><a href="https://android.googlesource.com/platform/frameworks/base/+/master/core/java/android/app/admin/DevicePolicyManager.java">DevicePolicyManager.ACTION_PROVISION_MANAGED_PROFILE</a></p>
+
+<p>Here is a sample intent that will trigger the creation of the managed profile
+and set the DeviceAdminSample as the profile owner:</p>
+
+<pre>
+adb shell am start -a android.app.action.PROVISION_MANAGED_PROFILE \
+          -c android.intent.category.DEFAULT \
+	      -e wifiSsid $(printf '%q' \"GoogleGuest\") \
+          -e deviceAdminPackage "com.google.android.deviceadminsample" \
+	      -e android.app.extra.deviceAdminPackageName $(printf '%q'
+                        .DeviceAdminSample\$DeviceAdminSampleReceiver) \
+	      -e android.app.extra.DEFAULT_MANAGED_PROFILE_NAME "My Organisation"
+</pre>
+
+<h2 id=device_owner_provisioning_via_nfc>Device Owner Provisioning via NFC</h2>
+
+<p>Device owner provisioning via NFC is similar to the profile owner method but
+requires more bootstrapping before managed provisioning.</p>
+
+<p>To use this method, <a href="http://developer.android.com/guide/topics/connectivity/nfc/nfc.html">NFC bump</a> the device from the first page of setup wizard (SUW). This offers a low-touch
+flow and configures Wi-Fi, installs the DPC, and sets the DPC as device owner.</p>
+
+<p>Here is the typical NFC bundle:</p>
+
+<pre>
+                EXTRA_PROVISIONING_DEVICE_ADMIN_PACKAGE_NAME
+                EXTRA_PROVISIONING_DEVICE_ADMIN_PACKAGE_LOCATION
+                EXTRA_PROVISIONING_DEVICE_ADMIN_PACKAGE_CHECKSUM
+                EXTRA_PROVISIONING_WIFI_SSID
+                EXTRA_PROVISIONING_WIFI_SECURITY_TYPE
+</pre>
+
+<p>The device must have NFC configured to accept the managed provisioning mimetype
+from SUW:</p>
+
+<pre>
+/packages/apps/Nfc/res/values/provisioning.xml
+
+      &lt;bool name="enable_nfc_provisioning"&gt;true&lt;/bool&gt;
+      &lt;item&gt;application/com.android.managedprovisioning&lt;/item&gt;
+</pre>
+
+<h2 id=device_owner_provisioning_with_activation_code>Device Owner Provisioning with Activation Code</h2>
+
+<p>Select <em>Add Work Account</em> from the setup wizard. This triggers a
+lookup of the EMM from Android servers.</p>
+
+<p>The device installs the EMM app and starts provisioning flow. As an extra
+option, Android device administration supports the option of using email
+address with a six-digit activation code to bootstrap the process as part of
+setup wizard.</p>
+
+<h2 id=emm_benefits>EMM benefits</h2>
+
+<p>An EMM can help by conducting these tasks for you:</p>
+
+<ul>
+  <li>Provision managed profile
+  <li>Apply security policies
+  <ul>
+    <li>Set password complexity
+    <li>Lockdowns: disable screenshots, sharing from managed profile, etc.
+  </ul>
+  <li>Configure enterprise connectivity
+  <ul>
+    <li>Use WifiEnterpriseConfig to configure corporate Wi-Fi
+    <li>Configure VPN on the device
+    <li>Use DPM.setApplicationRestrictions() to configure corporate VPN
+  </ul>
+  <li>Enable corporate app Single Sign-On (SSO)
+  <ul>
+    <li>Install desired corporate apps
+    <li>Use DPM.installKeyPair()to silently install corp client certs
+    <li>Use DPM.setApplicationRestrictions() to configure hostnames, cert alias’ of
+corporate apps
+  </ul>
+</ul>
+
+<p>Managed provisioning is just one piece of the EMM end-to-end workflow, with the
+  end goal being to make corporate data accessible to apps in the managed profile.</p>
+
+<p>See <a href="https://docs.google.com/document/d/1xWdZHjsDB_4FWQcHfPh84EuTvljoMgrc2JINGMBtDQg/edit#">Manual Setup for Device Owner Testing</a> for testing instructions.</p>
diff --git a/src/devices/tech/admin/testing-setup.jd b/src/devices/tech/admin/testing-setup.jd
new file mode 100644
index 0000000..678c04b
--- /dev/null
+++ b/src/devices/tech/admin/testing-setup.jd
@@ -0,0 +1,93 @@
+page.title=Setting up Device Testing
+@jd:body
+
+<!--
+    Copyright 2015 The Android Open Source Project
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+-->
+<div id="qv-wrapper">
+  <div id="qv">
+    <h2>In this document</h2>
+    <ol id="auto-toc">
+    </ol>
+  </div>
+</div>
+
+<p>These are the essential elements that must exist for OEM devices to ensure
+minimal support for managed profiles:</p>
+
+<ul>
+  <li>Profile Owner as described in <a
+href="https://developer.android.com/training/enterprise/app-compatibility.html">Ensuring
+Compatibility with Managed Profiles</a>
+  <li>Device Owner
+  <li>Activation Code Provisioning
+  </ul>
+<p>See <a href="implement.html">Implementing Device Administration</a> for the complete list of requirements.</p>
+
+<h2 id=summary>Summary</h2>
+<p>To test your device administration features:</p>
+
+<ol>
+  <li>For device owner, use the  <a
+href="https://developer.android.com/samples/BasicManagedProfile/index.html">BasicManagedProfile.apk</a>
+test app.
+  <li>Consider working with other enterprise mobility management (EMM) providers
+directly.
+</ol>
+
+<h2 id=set_up_the_device_owner_for_testing>Set up the device owner for testing</h2>
+<ol>
+  <li>Device MUST be built with <strong>userdebug</strong> or <strong>eng</strong> build.
+  </li>
+  <li>Factory reset the target device (and continue with the next steps in the
+    meantime).
+  </li>
+      <li>Download <a
+        href="http://developer.android.com/downloads/samples/BasicManagedProfile.zip">BasicManagedProfile.zip</a>. (Also see the <a
+        href="http://developer.android.com/samples/BasicManagedProfile/index.html">BasicManagedProfile</a> documentation.)</li>
+      <li>Unzip the file.
+      <li>Navigate (<code>cd</code>) to the unzipped directory.</li>
+      <li>If you don't have it, download the <a href="http://developer.android.com/sdk/index.html#Other">Android SDK Tools</a> package.</li>
+      <li>Create a file with the name <code>local.properties</code> containing the following single
+        line:<br>
+        <code>sdk.dir=<em>&lt;path to your android SDK folder&gt;</em></code><br>
+      <li>On Linux and Mac OS, run:<br>
+        <code>./gradlew assembleDebug</code><br>
+        Or on windows run:<br>
+        <code>gradlew.bat assembleDebug</code></li>
+      <li>If the build is unsuccessful because you have an outdated android SDK, run:<br>
+        <code><em>&lt;your android sdk folder&gt;</em>/tools/android update sdk -u -a</code></li>
+      <li>Wait for factory reset to complete if it hasn’t yet.<br>
+	<p class="Caution"><strong>Caution</strong>: Stay on the first screen
+        after factory reset and do not finish the setup wizard.</li>
+      <li>Install the BasicManagedProfile app by running the following command:<br>
+        <code>adb install ./Application/build/outputs/apk/Application-debug.apk </code>
+      </li>
+  <li>Set this app as the device owner by running this command:<br><code>$ adb shell am start -a
+    com.android.managedprovisioning.ACTION_PROVISION_MANAGED_DEVICE --es
+    android.app.extra.PROVISIONING_DEVICE_ADMIN_PACKAGE_NAME
+    com.example.android.basicmanagedprofile</code>
+  </li>
+  <li>Go through device owner setup on the device (encrypt, select Wi-Fi, etc.)</li>
+</ol>
+
+<h2 id=verify_the_device_owner_was_correctly_setup>Verify the device owner was correctly setup</h2>
+<ol>
+  <li>Go to <em>Settings > Security > Device Administrators</em>.
+  </li>
+  <li>Confirm the BasicManagedProfile is in the list and verify it cannot be
+    disabled. (This signifies it is a device owner.)
+  </li>
+</ol>
diff --git a/src/devices/tech/dalvik/dex-format.jd b/src/devices/tech/dalvik/dex-format.jd
index 9b7a6a2..5315db1 100644
--- a/src/devices/tech/dalvik/dex-format.jd
+++ b/src/devices/tech/dalvik/dex-format.jd
@@ -2,7 +2,7 @@
 @jd:body
 
 <!--
-    Copyright 2013 The Android Open Source Project
+    Copyright 2015 The Android Open Source Project
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
diff --git a/src/devices/tech/index.jd b/src/devices/tech/index.jd
index 62a1f59..10c42ab 100644
--- a/src/devices/tech/index.jd
+++ b/src/devices/tech/index.jd
@@ -30,14 +30,6 @@
 are looking to modify, contribute to, or port the Android software. This is
 "under the hood" information intended for engineers.</p>
 
-<h2 id="accessory-protocol-information">Accessories</h2>
-<p>Android devices can connect to hardware accessories, such as audio docks,
-keyboards and custom hardware, through USB or Bluetooth. This section
-describes the Android Open Accessory protocol (AOAP) for accessory hardware
-builders.</p>
-<p><a href="{@docRoot}accessories/index.html">&raquo; Accessory Protocol
-Information</a></p>
-
 <h2 id="art-technical-information">ART</h2>
 <p>The Android runtime (ART) is the heart of Android. It's a fast, ahead-of-time
 compiled runtime with modern garbage collection designed to scale.
@@ -61,6 +53,13 @@
 <p><a href="{@docRoot}devices/tech/debug/index.html">&raquo; Debugging
 Information</a></p>
 
+<h2 id="admin-information">Device Administration</h2>
+<p>Since Android 5.0, the platform supports use cases in a corporate
+environment under the auspices of each company’s information technology (IT)
+department.</p>
+<p><a href="{@docRoot}devices/tech/admin/index.html">&raquo; Device
+administration information</a></p>
+
 <h2 id="HAL-technical-information">HAL File Reference</h2>
 <p>Android's Hardware Abstraction Layer (HAL) provides the interface between
 software APIs and hardware drivers. This section contains the commented code
@@ -109,4 +108,4 @@
 slot into environments with existing build, test, and reporting
 infrastructures.</p>
 <p><a href="{@docRoot}devices/tech/test_infra/tradefed/index.html">
-&raquo; Trade Federation Testing Infrastructure Overview</a></p>
\ No newline at end of file
+&raquo; Trade Federation Testing Infrastructure Overview</a></p>
diff --git a/src/devices/tech/kernel.jd b/src/devices/tech/kernel.jd
index 637c5c4..e3f89bb 100644
--- a/src/devices/tech/kernel.jd
+++ b/src/devices/tech/kernel.jd
@@ -2,7 +2,7 @@
 @jd:body
 
 <!--
-    Copyright 2013 The Android Open Source Project
+    Copyright 2015 The Android Open Source Project
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
@@ -16,7 +16,18 @@
     See the License for the specific language governing permissions and
     limitations under the License.
 -->
-<p>The kernel configuration settings in this document are meant to be used as a base for an Android kernel configuration. All devices should have the options in android-base configuration enabled. While not mandatory, the options in android-recommended configuration enable advanced Android 
+<div id="qv-wrapper">
+  <div id="qv">
+    <h2>In this document</h2>
+    <ol id="auto-toc">
+    </ol>
+  </div>
+</div>
+
+<p>The kernel configuration settings in this document are meant to be used as a
+base for an Android kernel configuration. All devices should have the options
+in android-base configuration enabled. While not mandatory, the options in
+android-recommended configuration enable advanced Android 
 features.</p>
 
 <p>
diff --git a/src/devices/tech/resources.jd b/src/devices/tech/resources.jd
new file mode 100644
index 0000000..dade1a7
--- /dev/null
+++ b/src/devices/tech/resources.jd
@@ -0,0 +1,20 @@
+page.title=System Resources
+@jd:body
+
+<!--
+    Copyright 2015 The Android Open Source Project
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+-->
+
+<p> The following sections contain information, documentation, tips and tricks about Android system resources.</p>
diff --git a/src/devices/tech/security/images/device_states.png b/src/devices/tech/security/images/device_states.png
deleted file mode 100644
index 319c345..0000000
--- a/src/devices/tech/security/images/device_states.png
+++ /dev/null
Binary files differ
diff --git a/src/devices/tech/security/images/dm-verity_mgmt.png b/src/devices/tech/security/images/dm-verity_mgmt.png
index f67b93f..2c2854e 100644
--- a/src/devices/tech/security/images/dm-verity_mgmt.png
+++ b/src/devices/tech/security/images/dm-verity_mgmt.png
Binary files differ
diff --git a/src/devices/tech/security/images/verified_boot.png b/src/devices/tech/security/images/verified_boot.png
index 592aee8..b1c5cb6 100644
--- a/src/devices/tech/security/images/verified_boot.png
+++ b/src/devices/tech/security/images/verified_boot.png
Binary files differ
diff --git a/src/devices/tech/security/overview/acknowledgements.jd b/src/devices/tech/security/overview/acknowledgements.jd
index 19e79ec..35e8cbc 100644
--- a/src/devices/tech/security/overview/acknowledgements.jd
+++ b/src/devices/tech/security/overview/acknowledgements.jd
@@ -2,7 +2,7 @@
 @jd:body
 
 <!--
-    Copyright 2014 The Android Open Source Project
+    Copyright 2015 The Android Open Source Project
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
@@ -16,6 +16,14 @@
     See the License for the specific language governing permissions and
     limitations under the License.
 -->
+<div id="qv-wrapper">
+  <div id="qv">
+    <h2>In this document</h2>
+    <ol id="auto-toc">
+    </ol>
+  </div>
+</div>
+
 <p>The Android Security Team would like to thank the following people and
 parties for helping to improve Android security. They have done this either by
 finding and responsibly reporting security vulnerabilities to <a
diff --git a/src/devices/tech/security/verifiedboot/dm-verity.jd b/src/devices/tech/security/verifiedboot/dm-verity.jd
index f86c1b2..0b03dda 100644
--- a/src/devices/tech/security/verifiedboot/dm-verity.jd
+++ b/src/devices/tech/security/verifiedboot/dm-verity.jd
@@ -189,6 +189,9 @@
 
 <p>And this table describes those metadata fields.</p>
 
+<p class="table-caption" id="table1">
+  <strong>Table 1.</strong> Verity metadata fields</p>
+
 <table>
 <tr>
 <th>Field</th>
@@ -233,3 +236,11 @@
 <td>0</td>
 </tr>
 </table>
+
+<h3 id="optimize">Optimizing dm-verity</h3>
+
+<p>To get the best performance out of dm-verity, you should:</p>
+  <ul>
+    <li>In the kernel, turn on NEON SHA-2 for ARMv7 and the SHA-2 extensions for ARMv8.
+    <li>Experiment with different read-ahead and prefetch_cluster settings to find the best configuration for your device.
+  </ul>
diff --git a/src/devices/tech/security/verifiedboot/verified-boot.jd b/src/devices/tech/security/verifiedboot/verified-boot.jd
index c96d930..19a95a4 100644
--- a/src/devices/tech/security/verifiedboot/verified-boot.jd
+++ b/src/devices/tech/security/verifiedboot/verified-boot.jd
@@ -41,6 +41,9 @@
 
 <h2 id=glossary>Glossary</h2>
 
+<p class="table-caption" id="table1">
+  <strong>Table 1.</strong> Glossary of terms related to verified boot</p>
+
 <table>
  <tr>
     <td>
@@ -65,7 +68,7 @@
 </td>
     <td>
 <p>The device state indicates how freely software can be flashed to the device.
-Device states are LOCKED, UNLOCKED, or VERIFIED.</p>
+Device states are LOCKED and UNLOCKED.</p>
 </td>
  </tr>
  <tr>
@@ -94,38 +97,39 @@
 must be used to verify the boot image.</p>
 </td>
  </tr>
- <tr>
-    <td>
-<p>User provided keystore</p>
-</td>
-    <td>
-<p>The user keystore is a keystore flashed to the device via <code>fastboot 
-flash keystore &lt;path&gt;</code>.</p>
-</td>
- </tr>
 </table>
 
 <h2 id=overview>Overview</h2>
 
 <p>In addition to device state - which already exists in devices and controls
 whether the bootloader allows new software to be flashed - we introduce the
-concept of boot state that indicates the state of device integrity. We also
-add a third device state, which allows developers for example, to flash the
-software more frequently without a data wipe while still benefiting from
-verification.</p>
+concept of boot state that indicates the state of device integrity.</p>
+
+<h3 id=classes>Classes</h3>
+
+<p>We define two implementation classes for verified boot depending on how
+fully the device implements this specification, as follows:</p>
+
+<p><strong>Class A</strong>  implements verified boot with full chain of trust
+up to verified partitions. This implementation must support the LOCKED device
+state, and GREEN and RED boot states.</p>
+
+<p><strong>Class B</strong> implements Class A and additionally supports the
+UNLOCKED device state and the ORANGE boot state.</p>
 
 <h3 id=verification_keys>Verification keys</h3>
 
 <p>Bootloader integrity must be verified using a hardware root of trust. For
-verifying boot and recovery images, the bootloader must have a fixed OEM key
-available to it. It must always attempt to verify the boot image using the OEM
-key and only try other possible keys if this verification fails.</p>
+verifying boot and recovery partitions, the bootloader must have a fixed OEM key
+available to it. It must always attempt to verify the boot partition using the OEM
+key first and try other possible keys only if this verification fails.</p>
 
-<p>It must be possible for the user to flash alternative image verification keys
-to the device, and the bootloader must try verification using these keys if
-verification using the OEM key fails. However, using an image signed with the
-user-provided keystore must result in a notification to be shown, as described
-below.</p>
+<p>In Class B implementations, it must be possible for the user to flash
+software signed with other keys when the device is UNLOCKED. If the device is
+then LOCKED and verification using the OEM key fails, the bootloader must try
+verification using the certificate embedded in the partition signature.
+However, using a partition signed with anything other than the OEM key must
+result in a notification or a warning, as described below.</p>
 
 <h3 id=boot_state>Boot state</h3>
 
@@ -133,103 +137,62 @@
 attempt:</p>
 
 <ul>
-  <li> GREEN, indicating a full chain of trust extending from the bootloader to the
-system partition, including the bootloader, boot partition, and system
-partition.
+  <li>GREEN, indicating a full chain of trust extending from the bootloader to
+verified partitions, including the bootloader, boot partition, and all verified
+partitions.
+
+  <li>YELLOW, indicating the boot partition has been verified using the
+embedded certificate, and the signature is valid. The bootloader is required to
+display a notification and the fingerprint of the public key during boot.
+
+  <li>ORANGE, indicating a device may be freely modified. Device integrity is
+left to the user to verify out-of-band. The bootloader must display a warning
+to the user before allowing the boot process to continue.
+
+  <li>RED, indicating the device has failed verification. The bootloader must
+display a warning to the user before allowing the boot process to continue.
 </ul>
 
-<ul>
-  <li> YELLOW, indicating a chain of trust starting from a user-provided keystore
-and extending up. To enable users to acquire trust in their keystore,
-bootloaders are required to display a partial hash of the verifying keystore
-during boot.
-</ul>
+<p>The recovery partition must also be verified in the exact same way.</p>
 
-<ul>
-  <li> ORANGE, indicating a device may be freely modified. Device integrity is
-left to the user to verify out-of-band.
-</ul>
+<h3 id=device_state>Device state</h3>
 
-<ul>
-  <li> RED, indicating the device has failed verification. This must display a
-warning to the user before allowing the boot process to continue.
-</ul>
+<p>The device is required to be in one of two states at all times:</p>
 
-<p>The recovery partition must also be verified and should be verified in the
-exact same way.</p>
+<ol>
+  <li>LOCKED, indicating the device cannot be flashed. A LOCKED device must
+boot into the GREEN, YELLOW, or RED states during any attempted boot.
+
+  <li>UNLOCKED, indicating the device may be flashed freely and is not intended
+to be verified. An UNLOCKED device must always boot to the ORANGE boot state.
+</ol>
 
 <img src="../images/verified_boot.png" alt="Verified boot flow" id="figure1" />
 <p class="img-caption"><strong>Figure 1.</strong> Verified boot flow</p>
 
-<h3 id=device_state>Device state</h3>
-
-<p>The device is required to be in one of three states at all times:</p>
-
-<ol>
-  <li>LOCKED, indicating the device cannot currently be flashed. In the image
-above, a LOCKED device must boot into the GREEN state, YELLOW state, or RED
-state during any attempted boot. It must not be possible to alter the user
-keystore in the LOCKED state.
-
-  <li>VERIFIED, indicating someone in physical control of the device may perform
-limited actions intended to change the state of the device but may not break
-its current chain of trust. In the image above, a VERIFIED device must boot
-into the GREEN state, YELLOW state, or RED state during each attempted boot. It
-must not be possible to alter the user keystore in the VERIFIED state. It must
-be possible to:
-   <ol>
-    <li> Flash the following partitions:
-    <ol>
-      <li> bootloader
-      <li> boot partition
-      <li> system partition
-      <li> vendor partition
-      <li> recovery partition
-    </ol>
-    <li> Erase the following partitions:
-    <ol>
-      <li> userdata
-      <li> cache
-    </ol>
-   </ol>
-
-<p>Boot and recovery image signatures may be verified during the flashing process,
-and the bootloader may reject images that do not validate against the OEM key
-or the user-provided keystore at this point. However, signatures must also be
-verified again at every boot.
-
-  <li>UNLOCKED, indicating the device may be flashed freely and is not intended
-to be verified.
-</ol>
-
 <h2 id=detailed_design>Detailed design</h2>
 
 <p>Achieving full chain of trust requires support from both the bootloader and the
-software on the boot partition, specifically <code>init</code>, which is responsible for
-mounting additional partitions. Verification metadata must also be appended to the
-system partition and any additional partitions whose integrity should be
-verified.</p>
+software on the boot partition, which is responsible for mounting further
+partitions. Verification metadata must also be appended to the system partition
+and any additional partitions whose integrity should be verified.</p>
 
 <h3 id=bootloader_requirements>Bootloader requirements</h3>
 
-<p>The bootloader is the guardian of the device state, manages the user-provided
-keystore, and is responsible for initializing the TEE and binding its root of
-trust.</p>
+<p>The bootloader is the guardian of the device state and is responsible for
+initializing the TEE and binding its root of trust.</p>
 
 <p>Most importantly, the bootloader must verify the integrity of the boot and/or
 recovery partition before moving execution to the kernel and display the
-warnings or notifications in the section <a href="#boot_state">Boot state</a>.</p>
+warnings specified in the section <a href="#boot_state">Boot state</a>.</p>
 
-<h4 id=changing_device_state><strong>Changing device state</strong></h4>
+<h4 id=changing_device_state>Changing device state</h4>
 
 <p>State changes are performed using the <code>fastboot flashing [unlock |
-verified | lock]</code> command. And to protect user data, <strong>all</strong>
+lock]</code> command. And to protect user data, <strong>all</strong>
 state transitions require a data wipe. Note the user must be asked for
 confirmation before data is deleted.</p>
 
-<img src="../images/device_states.png" alt="Changing device states" id="figure2" />
-<p class="img-caption"><strong>Figure 2.</strong> Changing device states</p>
-
 <ol>
   <li>The UNLOCKED to LOCKED transition is anticipated when a user buys a used
 development device. As a result of locking the device, the user should have
@@ -237,20 +200,13 @@
 
   <li>The LOCKED to UNLOCKED transition is expected in the case where a developer
 wishes to disable verification on the device.
-
-  <li>The LOCKED to VERIFIED transition is expected in the case where a developer
-wishes to do development on the device and doesn’t want to wipe data frequently.
-
-  <li>The VERIFIED to LOCKED transition is idempotent with the above.
-
-  <li>The UNLOCKED to VERIFIED transition is anticipated when a user wishes to put a
-development device in a more secure state but may not want to prevent
-themselves from flashing new system images.
-
-  <li> The VERIFIED to UNLOCKED transition is idempotent with the above.
 </ol>
 
 <p>Requirements for <code>fastboot</code> commands that alter device state are listed in the table below:</p>
+
+<p class="table-caption" id="table2">
+  <strong>Table 2.</strong> <code>fastboot</code> commands</p>
+
 <table>
  <tr>
     <td>
@@ -266,9 +222,8 @@
 flashing lock</code></td>
     <td>
 <ul>
-  <li>Wipe data after asking the user for confirmation     
+  <li>Wipe data after asking the user for confirmation
   <li>Clear a write-protected bit indicating the device is unlocked
-  <li>Clear a write-protected bit indicating the device is verified
 </ul>
 </td>
  </tr>
@@ -278,21 +233,8 @@
 flashing unlock</code></td>
     <td>
 <ul>
-  <li>Wipe data after asking the user for confirmation     
+  <li>Wipe data after asking the user for confirmation
   <li>Set a write-protected bit indicating the device is unlocked
-  <li>Clear a write-protected bit indicating the device is verified
-</ul>
-</td>
- </tr>
- <tr>
-    <td>
-<code>
-flashing verified</code></td>
-    <td>
-<ul>
-  <li>Wipe data after asking the user for confirmation     
-  <li>Clear a write-protected bit indicating the device is unlocked
-  <li>Set a write-protected bit indicating the device is verified
 </ul>
 </td>
  </tr>
@@ -300,6 +242,10 @@
 
 <p>When altering partition contents, the bootloader must check the bits set by
 the above commands as described in the following table:</p>
+
+<p class="table-caption" id="table3">
+  <strong>Table 3.</strong> <code>fastboot</code> command requirements</p>
+
 <table>
  <tr>
     <td>
@@ -314,128 +260,110 @@
 <code>
 flash &lt;partition&gt;</code></td>
     <td>
-<ul>
-  <li>If the bit set by <code>flashing unlock</code> is set, flash the partition as normal    
-  <li>If this bit is not set, check the bit set by <code>flashing verified</code>
-    <ul>
-      <li>If this bit is not set, exit with an error
-      <li>If this bit is set and &lt;partition&gt; is on the list provided in
-          the section <a href="#device_state">Device state</a>, flash the partition as normal.
-   </ul>
-</ul>
+    <p>If the bit set by <code>flashing unlock</code> is set, flash the
+      partition. Otherwise, do not allow flashing.<p>
     </td>
  </tr>
 </table>
 
-<p>The same checks should be performed for any <code>fastboot</code> command that can be used to change the contents of partitions.</p>
+<p>The same checks should be performed for any <code>fastboot</code> command
+that can be used to change the contents of partitions.</p>
 
-<h4 id=managing_user_provided_keystore><strong>Managing user-provided keystore</strong></h4>
+<p class="note"><strong>Note</strong>: Class B implementations must support
+changing device state.</p>
 
-<p>Users can flash their own verification keys to the device, which must be
-used to verify the integrity of boot and recovery images if verification
-against the OEM key fails. This allows a developer to change the system
-software frequently, for example,  while still keeping verified boot enabled.</p>
+<h4 id=binding_tee_root_of_trust>Binding TEE root of trust</h4>
 
-<p>The bootloader is responsible for maintaining the integrity of the user
-keystore. It must not be possible to change the contents of the keystore unless
-the device is UNLOCKED. When the user flashes a new keystore to the device, the
-bootloader must sign it using the TEE and store the signed keystore. Before
-using keys from the keystore, the bootloader must use the TEE to verify the
-signature.</p>
-
-<p>Requirements for <code>fastboot</code> commands used to manage the user-provided keystore are listed in the table
-below:</p>
-<table>
- <tr>
-    <td>
-<p><strong><code>fastboot</code> command</strong></p>
-</td>
-    <td>
-<p>Requirements</p>
-</td>
- </tr>
- <tr>
-    <td>
-<code>
-flash keystore &lt;filename&gt;</code></td>
-    <td>
-<ul>
-  <li>Check the bit set by <code>flashing unlock</code>; if not set, exit with an error 
-  <li>Validate the given keystore against the format provided in section <a href="#keystore_format">Keystore format</a>
-  <li>Pass the keystore to the TEE for signing
-  <li>Write the signed keystore to the write-protected user keystore storage
-      area (location to be determined by the OEM)
-</ul>
-</td>
- </tr>
- <tr>
-    <td>
-<code>
-erase keystore</code></td>
-    <td>
-<ul>
-  <li>Check the bit set by <code>flashing unlock</code>; if not set, exit with an error
-  <li>Erase the keystore stored in the write-protected user keystore storage area
-</ul>
-    </td>
- </tr>
-</table>
-
-<h4 id=binding_tee_root_of_trust><strong>Binding TEE root of trust</strong></h4>
-
-<p>After the bootloader has initialized the TEE and performed boot image
-verification steps, it must pass the following information to the TEE Keymaster
-as the root of trust:</p>
+<p>If TEE is available, the bootloader should pass the following information to
+the TEE to bind the Keymaster root of trust, after partition verification and
+TEE initialization:</p>
 
 <ol>
-  <li>The public key that was used to sign the boot image
-  <li>The current device state (LOCKED, VERIFIED, or UNLOCKED)
+  <li>the public key that was used to sign the boot partition
+  <li>the current device state (LOCKED or UNLOCKED)
 </ol>
 
-<p>This changes the keys derived by the TEE. For disk encryption, for example,
-this prevents user data from being decrypted when the device is booted using a
-potentially untrusted image signed with a different key.</p>
+<p>This changes the keys derived by the TEE. Taking disk encryption as an example,
+this prevents user data from being decrypted when the device state changes.</p>
 
 <p class="note"><strong>Note:</strong> This means if the system software or the
 device state changes, encrypted user data will no longer be accessible as the
 TEE will attempt to use a different key to decrypt the data.</p>
 
-<h4 id=booting_into_recovery><strong>Booting into recovery</strong></h4>
+<h4 id=booting_into_recovery>Booting into recovery</h4>
 
-<p>The recovery image should be verified in exactly the same manner as the boot
-image.</p>
+<p>The recovery partition should be verified in exactly the same manner as the
+boot partition.</p>
+
+<h4 id=comm_boot_state>Communicating boot state</h4>
+
+<p>System software needs to be able to determine the verification status of
+previous stages. The bootloader must specify the current boot state as a
+parameter on the kernel command line (or through the device tree under
+<code>firmware/android/verifiedbootstate</code>) as described in the table
+below:</p>
+
+<p class="table-caption" id="table4">
+  <strong>Table 4.</strong> Kernel command line parameters</p>
+
+<table>
+  <tr>
+    <th>Kernel command line parameter</th>
+    <th>Description</th>
+  </tr>
+  <tr>
+    <td><code>androidboot.verifiedbootstate=green</code></td>
+    <td>Device has booted into GREEN boot state.<br>
+        Boot partition has been verified using the OEM key and it’s valid.</td>
+  </tr>
+  <tr>
+    <td><code>androidboot.verifiedbootstate=yellow</code></td>
+    <td>Device has booted into YELLOW boot state.<br>
+	Boot partition has been verified using the certificate embedded into
+        the signature and it’s valid.</td>
+  </tr>
+  <tr>
+    <td><code>androidboot.verifiedbootstate=orange</code></td>
+    <td>Device has booted into ORANGE boot state.<br>
+        The device is unlocked and no verification has been performed.</td>
+  </tr>
+  <tr>
+    <td><code>androidboot.verifiedbootstate=red</code></td>
+    <td>Device has booted into RED boot state.<br>
+        The device has failed verification.</td>
+  </tr>
+</table>
 
 <h3 id=boot_partition>Boot partition</h3>
 
-<p>Once execution has moved to the boot and/or recovery image, <code>init</code> is responsible
-for setting up verification for further partitions. Due to its large size, the
-system partition cannot be verified similarly to previous parts but must be
-verified in real time as it’s being accessed by using the dm-verity kernel
-driver.</p>
+<p>Once execution has moved to the boot partition, the software there is responsible
+for setting up verification of further partitions. Due to its large size, the
+system partition typically cannot be verified similarly to previous parts but must be
+verified as it’s being accessed instead using the dm-verity kernel driver or a
+similar solution.</p>
 
-<p>When <code>fs_mgr</code> flags in the device’s <code>fstab</code> indicate a partition should be
-verified, <code>init</code> will verify the signed verity metadata appended to the partition
-before mounting it and set up the dm-verity device for the partition.</p>
+<p>If dm-verity is used to verify large partitions, the signature of the verity
+metadata appended to each verified partition must be verified before the
+partition is mounted and dm-verity is set up for it.</p>
 
-<h4 id=managing_dm-verity><strong>Managing dm-verity</strong></h4>
+<h4 id=managing_dm-verity>Managing dm-verity</h4>
 
-<p>By default, dm-verity operates in verifying mode and verifies each block read
-from the device against a hash tree passed to it by <code>init</code> during set up. If it
+<p>By default, dm-verity operates in enforcing mode and verifies each block read
+from the partition against a hash tree passed to it during setup. If it
 comes across a block that fails to verify, it returns an I/O error and makes
 the block with unexpected contents inaccessible to user space. Depending on
 which block is corrupted, this may cause some of the programs that reside on
 the partition to malfunction.</p>
 
-<p>Using a persistent flag, dm-verity can also be configured to function in
-logging mode. This flag is read by <code>init</code> when setting up dm-verity. And if the
-mode flag is set to logging or verity metadata cannot be verified, a warning
-must be displayed to the user, similar to the warning the bootloader shows
-before booting into RED state.</p>
+<p>Using an optional verity table parameter, dm-verity can be configured to
+function in logging mode. If dm-verity is not started in enforcing mode for any
+reason, or verity metadata cannot be verified, a warning must be displayed to
+the user, similar to the one shown before booting into the RED state.</p>
 
-<img src="../images/dm-verity_mgmt.png" alt="dm-verity management" id="figure3" />
-<p class="img-caption"><strong>Figure 3.</strong> dm-verity management</p>
+<img src="../images/dm-verity_mgmt.png" alt="dm-verity management" id="figure2" />
+<p class="img-caption"><strong>Figure 2.</strong> dm-verity management</p>
 
-<h4 id=recovering_from_dm-verity_errors><strong>Recovering from dm-verity errors</strong></h4>
+<h4 id=recovering_from_dm-verity_errors>Recovering from dm-verity errors</h4>
 
 <p>Since the system partition is by far larger than the boot partition, the
 probability of verification errors is also higher. Specifically, there is a
@@ -445,31 +373,32 @@
 
 <p>It’s generally not possible to distinguish disk corruption from malicious
 changes, so any change to the system partition must result in the user being
-notified, and no unverified data must leak to user space until a warning has
+notified; and no unverified data must leak to user space until a warning has
 been shown. However, we must also assume most verification failures are
 not the result of malicious behavior; so the user must also have an option to
 continue using the device without verification.</p>
 
-<p>If dm-verity is in verifying mode and a block of a partition fails to verify,
-it will send a <code>uevent</code> to notify user space of the error. This event must be
-handled by software in the boot partition as potentially any program residing
-on the verified partition may not function anymore. When the event is received,
-the persistent dm-verity state must be updated to set the mode flag to logging
-mode, and the device must be rebooted. When the device restarts,
-<code>init</code> will warn the user of changes to the partition before mounting it.</p>
+<p>When a dm-verity error is detected, the device must be rebooted and
+dm-verity must be started in logging mode during all subsequent restarts until
+any of the verified partitions is reflashed or changed by an OTA update. This
+means dm-verity state should be stored in a persistent flag. When a verified
+partition has been changed, the flag must be cleared and dm-verity must again
+be started in enforcing mode. Anytime dm-verity is not started in enforcing
+mode, a warning must be shown to the user before any of the verified partitions
+are mounted.</p>
 
 <h3 id=verified_partition>Verified partition</h3>
 
 <p>In a verified device, the system partition must always be verified. But any
-other read-only partition can also be set to be verified, as well. Specifically,
-any read-only partition that contains executable code must be verified on a
-verified device. This include the vendor partition, if one exists, for example.</p>
+other read-only partition should also be set to be verified, as well. Any
+read-only partition that contains executable code must be verified on a
+verified device. This includes vendor and OEM partitions, if they exist, for example.</p>
 
 <p>In order for a partition to be verified, signed verity metadata must be
 appended to it. The metadata consists of a hash tree of the partition contents
 and a verity table containing signed parameters and the root of the hash tree.
-If this information is missing or invalid when <code>init</code> attempts to
-mount the device, the user must be warned.</p>
+If this information is missing or invalid when dm-verity is set up for the
+partition, the user must be warned.</p>
 
 <h2 id=implementation_details>Implementation details</h2>
 
@@ -481,7 +410,6 @@
 
 <h3 id=signature_format>Signature format</h3>
 
-
 <p>The signature on an Android verifiable boot image is an ASN.1 DER-encoded
 message, which can be parsed with a decoder similar to the one found at: <a
 href="https://android.googlesource.com/platform/bootable/recovery/+/f4a6ab27b335b69fbc419a9c1ef263004b561265/asn1_decoder.cpp">platform/bootable/recovery/asn1_decoder.cpp</a><br/>
@@ -508,9 +436,9 @@
 <p>The <code>Certificate</code> field is the full X.509 certificate containing
 the public key used for signing, as defined by <a
 href="http://tools.ietf.org/html/rfc5280#section-4.1.1.2">RFC5280</a> section
-4.1. The bootloader must ignore this field and must NOT use the key
-specified in the certificate to verify the signature. Signatures must always be
-verified against the OEM key or the user-provided keystore only.</p>
+4.1. When LOCKED, the bootloader must always use the OEM key for verification
+first, and only boot to YELLOW or RED states if the embedded certificate is
+used for verification instead.</p>
 
 <p>The remaining structure is similar to that defined by <a
 href="http://tools.ietf.org/html/rfc5280#section-4.1.1.2">RFC5280</a> sections
@@ -526,7 +454,8 @@
   <li>Generate the unsigned image.
   <li>0-pad the image to the next page size boundary (omit this step if already
 aligned).
-  <li>Populate the fields of the <code>AuthenticatedAttributes</code> section above based on the padded image and desired target partition.
+  <li>Populate the fields of the <code>AuthenticatedAttributes</code> section
+      above based on the padded image and desired target partition.
   <li>Append the <code>AuthenticatedAttributes</code> structure above to the image.
   <li>Sign the image.
 </ol>
@@ -537,55 +466,23 @@
 a header).
   <li>Read the signature located at the offset above.
   <li>Validate the contents of the <code>AuthenticatedAttributes</code> field.
-If these values do not validate, treat it as a signature validation error.
+      If these values do not validate, treat it as a signature validation error.
   <li>Verify the image and <code>AuthenticatedAttributes</code> sections.
 </ol>
 
-<h3 id=keystore_format>Keystore format</h3>
-
-<p>The Android verified boot keystore format is an ASN.1 DER-encoded document. Its
- specification follows:</p>
-
-<pre>
-AndroidVerifiedBootKeystore DEFINITIONS ::=
-     BEGIN
-          FormatVersion ::= INTEGER
-          KeyBag ::= SEQUENCE {
-               Key  ::= SEQUENCE {
-                    AlgorithmIdentifier  ::=  SEQUENCE {
-                         algorithm OBJECT IDENTIFIER,
-                         parameters ANY DEFINED BY algorithm
-                    OPTIONAL
-                    }
-                    KeyMaterial ::= RSAPublicKey
-               }
-          }
-          Signature ::= AndroidVerifiedBootSignature OPTIONAL
-     END
-</pre>
-
-<p>Where <code>RSAPublicKey</code>, <code>AlgorithmIdentifier</code>, and
-parameters are as specified in <a
-href="http://tools.ietf.org/html/rfc3279#section-2.3.1">RFC3279</a>. Other key
-types specified in RFC3279 section 2.3 may optionally be supported,
-in which case the appropriate type for <code>Key</code> must be used.</p>
-
-<h3 id=keystore_location>Keystore location</h3>
-
-<p>The location of the keystore is not specified here, but that location must be
-known to the bootloader and both readable and writable by it. Reading should
-happen as per the above; writing a new keystore should be accomplished through
-<code>fastboot flash keystore &lt;path&gt;</code>. Sufficient storage must be
-provided for at least one key, with storage for additional keys recommended.</p>
-
 <h3 id=user_experience>User experience</h3>
 
 <p>A user in the GREEN boot state should see no additional user interaction besides that
-required by normal device boot. In other boot states, the user should see a
+required by normal device boot. In other boot states, the user must see a
 warning for at least five seconds. Should the user interact with the device during
-this time, the warning should remain visible until the user agrees to continue.</p>
+this time, the warning must remain visible at least 30 seconds longer, or until
+the user dismisses the warning.</p>
 
 <p>Sample user interaction screens for other states are shown in the following table:</p>
+
+<p class="table-caption" id="table5">
+  <strong>Table 5.</strong> Sample user interaction screens</p>
+
 <table>
  <tr>
     <td>
@@ -601,11 +498,11 @@
 </td>
     <td>
 <img src="../images/boot_yellow1.png" alt="Yellow device state 1" id="figure4" />
-<p class="img-caption"><strong>Figure 4.</strong> Yellow state example 1 UI</p>
+<p class="img-caption"><strong>Figure 3.</strong> Yellow state example 1 UI</p>
 </td>
     <td>
 <img src="../images/boot_yellow2.png" alt="Yellow device state 2" id="figure5" />
-<p class="img-caption"><strong>Figure 5.</strong> Yellow state example 2 UI</p>
+<p class="img-caption"><strong>Figure 4.</strong> Yellow state example 2 UI</p>
 </td>
 
  </tr>
@@ -615,7 +512,7 @@
 </td>
     <td>
 <img src="../images/boot_orange.png" alt="Orange device state" id="figure6" />
-<p class="img-caption"><strong>Figure 6.</strong> Orange state example UI</p>
+<p class="img-caption"><strong>Figure 5.</strong> Orange state example UI</p>
 </td>
  </tr>
  <tr>
@@ -624,7 +521,7 @@
 </td>
     <td>
 <img src="../images/boot_red.png" alt="Red device state" id="figure7" />
-<p class="img-caption"><strong>Figure 7.</strong> Red state example UI</p>
+<p class="img-caption"><strong>Figure 6.</strong> Red state example UI</p>
 </td>
  </tr>
 </table>
diff --git a/src/devices/tech/test_infra/tradefed/full_example.jd b/src/devices/tech/test_infra/tradefed/full_example.jd
index a9f57bc..34cd63a 100644
--- a/src/devices/tech/test_infra/tradefed/full_example.jd
+++ b/src/devices/tech/test_infra/tradefed/full_example.jd
@@ -2,7 +2,7 @@
 @jd:body
 
 <!--
-    Copyright 2013 The Android Open Source Project
+    Copyright 2015 The Android Open Source Project
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
@@ -16,6 +16,13 @@
     See the License for the specific language governing permissions and
     limitations under the License.
 -->
+<div id="qv-wrapper">
+  <div id="qv">
+    <h2>In this document</h2>
+    <ol id="auto-toc">
+    </ol>
+  </div>
+</div>
 
 <p>This tutorial guides you through the construction of a "hello world" Trade Federation test
 configuration, and gives you a hands-on introduction to the Trade Federation framework.  Starting
@@ -435,6 +442,5 @@
 <a href="https://android.googlesource.com/platform/tools/tradefederation/+/master"
 >Trade Federation source code</a> has a lot of useful information that isn't
 exposed in the documentation.  And if all else fails, try asking on the
-<a href="/source/community/index.html">android-platform</a> Google Group, with "Trade Federation"
-in the message subject.</p>
-
+<a href="{@docRoot}source/community.html">android-platform</a> Google Group, with "Trade Federation"
+in the message subject.</p>
\ No newline at end of file
diff --git a/src/devices/tech/test_infra/tradefed/fundamentals/index.jd b/src/devices/tech/test_infra/tradefed/fundamentals/index.jd
index 98ab260..68ff06d 100644
--- a/src/devices/tech/test_infra/tradefed/fundamentals/index.jd
+++ b/src/devices/tech/test_infra/tradefed/fundamentals/index.jd
@@ -2,7 +2,7 @@
 @jd:body
 
 <!--
-    Copyright 2013 The Android Open Source Project
+    Copyright 2015 The Android Open Source Project
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
@@ -70,6 +70,6 @@
 <p>If you've gotten through everything here and still have unanswered questions, first try taking
 a look at the <a href="https://android.googlesource.com/platform/tools/tradefederation/+/master"
 >Trade Federation source code.</a>.  Beyond that, feel free to try asking on the
-<a href="/source/community/index.html">android-platform</a> Google Group.  For best results, make
+<a href="{@docRoot}source/community.html">android-platform</a> Google Group.  For best results, make
 sure to mention "Trade Federation" (or "tradefed", or "TF") in the message subject.</p>
 
diff --git a/src/devices/tech/test_infra/tradefed/fundamentals/options.jd b/src/devices/tech/test_infra/tradefed/fundamentals/options.jd
index 3874256..568cd35 100644
--- a/src/devices/tech/test_infra/tradefed/fundamentals/options.jd
+++ b/src/devices/tech/test_infra/tradefed/fundamentals/options.jd
@@ -2,7 +2,7 @@
 @jd:body
 
 <!--
-    Copyright 2013 The Android Open Source Project
+    Copyright 2015 The Android Open Source Project
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
@@ -16,6 +16,13 @@
     See the License for the specific language governing permissions and
     limitations under the License.
 -->
+<div id="qv-wrapper">
+  <div id="qv">
+    <h2>In this document</h2>
+    <ol id="auto-toc">
+    </ol>
+  </div>
+</div>
 
 <p>Option handling lies at the heart of Trade Federation's modular approach.  In particular, options
 are the mechanism by which the Developer, Integrator, and Test Runner can work together without
diff --git a/src/devices/tech/test_infra/tradefed/index.jd b/src/devices/tech/test_infra/tradefed/index.jd
index dabe07f..64939b2 100644
--- a/src/devices/tech/test_infra/tradefed/index.jd
+++ b/src/devices/tech/test_infra/tradefed/index.jd
@@ -2,7 +2,7 @@
 @jd:body
 
 <!--
-    Copyright 2013 The Android Open Source Project
+    Copyright 2015 The Android Open Source Project
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
@@ -16,6 +16,14 @@
     See the License for the specific language governing permissions and
     limitations under the License.
 -->
+<div id="qv-wrapper">
+  <div id="qv">
+    <h2>In this document</h2>
+    <ol id="auto-toc">
+    </ol>
+  </div>
+</div>
+
 <p>Trade Federation (tradefed or TF for short) is a continuous test framework designed for running tests
 on Android devices. It's a Java application which runs on a host computer, and communicates to one or
 more Android devices using ddmlib (the library behind DDMS) over adb.</p>
diff --git a/src/index.jd b/src/index.jd
index 6eb5b6f..9e92d90 100644
--- a/src/index.jd
+++ b/src/index.jd
@@ -42,55 +42,59 @@
   <div class="landing-docs">
     <div class="col-8">
     <h3>What's New</h3>
-<a href="{@docRoot}compatibility/cts/index.html">
-        <h4>Compatibility Test Suite User Instructions</h4></a>
-        <p>The <strong><a
-        href="{@docRoot}compatibility/cts/index.html">Compatibility Test Suite (CTS)
-        User Manual</a></strong> previously presented as a PDF has been converted to native web
-        pages and updated to improve clarity.</p>
+<a href="{@docRoot}compatibility/android-cdd.pdf">
+        <h4>5.1 Compatibility Definition Document</h4></a>
+        <p>The Android <strong><a
+        href="{@docRoot}compatibility/android-cdd.pdf">5.1 Compatibility Definition
+        Document (CDD)</a></strong> has been published to reflect the
+        requirements of the latest version of Android.</p>
 
-<a href="{@docRoot}devices/halref/index.html">
-        <h4>Hardware Abstraction Layer References</h4></a>
-        <p>The <strong><a href="{@docRoot}devices/halref/index.html">Hardware
-        Abstraction Layer (HAL) reference files</a></strong> have been updated to
-        reflect the latest development, such as the introduction of
-        <code>AUDIO_PARAMETER_DEVICE_CONNECT</code> to <strong><a
-        href="{@docRoot}devices/halref/audio_8h_source.html">audio.h</a></strong>.</p>
+<a href="{@docRoot}devices/tech/admin/index.html">
+        <h4>Device Administration Introduction</h4></a>
+        <p>A new <strong><a
+        href="{@docRoot}devices/tech/admin/index.html">Device
+        Administration</a></strong> section summarizes use of Android in a corporate
+        environment, including <strong><a
+        href="{@docRoot}devices/tech/admin/implement.html">implementation</a></strong>, <strong><a 
+        href="{@docRoot}devices/tech/admin/provision.html">provisioning</a></strong>,
+        <strong><a
+        href="{@docRoot}devices/tech/admin/testing-setup.html">testing</a></strong>,
+        and more.</p>
 
-<a href="{@docRoot}devices/tech/debug/dumpsys.html">
-        <h4>Example Dumpsys Diagnostic Output</h4></a>
-        <p>In addition to the aforementioned <strong><a
-        href="{@docRoot}devices/input/diagnostics.html">Input
-        Diagnostics</a></strong>, you can now find Dumpsys examples of usage
-        data for <strong><a href="{@docRoot}devices/tech/ram/procstats.html">RAM
-        (procstats)</a></strong>, <strong><a
-        href="{@docRoot}devices/tech/netstats.html">network (netstats)</a></strong>,
-        and <strong><a
-        href="{@docRoot}devices/tech/power/batterystats.html">battery (batterystats)</a></strong>.</p>
-
-<a href="{@docRoot}devices/audio/latency_measurements.html">
-        <h4>Audio Latency Measurements</h4></a>
+<a href="{@docRoot}devices/audio/midi.html">
+        <h4>MIDI and Audio Latency for Developers</h4></a>
         <p>The Android audio team has published <strong><a
-        href="{@docRoot}devices/audio/latency_measurements.html">round-trip audio latency
-        measurements</a></strong> for select Nexus devices to help partners compare their
-        own devices and reduce latency further.</p>
+        href="{@docRoot}devices/audio/latency_app.html">advice to developers
+        for reducing latency</a></strong> and also instructions to partners on
+        implementing the new support for <strong><a
+        href="{@docRoot}devices/audio/midi.html">MIDI</a></strong> protocol now
+        available in AOSP.</p>
 
-<a href="{@docRoot}devices/tech/power/index.html">
-        <h4>Power Profile Details</h4></a>
+<a href="{@docRoot}compatibility/cts/development.html">
+        <h4>CTS Development Release Schedule</h4></a>
+        <p>Compatibility Test Suite (CTS) <strong><a
+        href="{@docRoot}compatibility/cts/development.html#release-schedule">release
+        schedule and branch information</a></strong> has been published,
+        including code freeze dates and auto-merge instructions.</p>
+
+<a href="{@docRoot}devices/tech/resources.html">
+        <h4>System Resources Section</h4></a>
+        <p>A new <strong><a href="{@docRoot}devices/tech/resources.html">System
+        Resources</a></strong> section has been added to contain documentation on the
+        <strong><a href="{@docRoot}devices/tech/kernel.html">kernel</a></strong>, <strong><a
+        href="{@docRoot}devices/tech/netstats.html">network</a></strong>, and
+        <strong><a href="{@docRoot}devices/tech/ram/index.html">RAM</a></strong>.</p>
+
+<a href="{@docRoot}devices/tech/security/verifiedboot/verified-boot.html">
+        <h4>Verified Boot Improvements</h4></a>
         <p><strong><a
-        href="{@docRoot}devices/tech/power/index.html">Power</a></strong>
-        information has been moved and expanded to include details on
-        <code>cpu.awake</code> and <code>cpu.active</code>. The need to create a
-        <code>power_profile.xml</code> file is also emphasized throughout.</p>
-
-<a href="{@docRoot}source/initializing.html">
-        <h4>Initializing Improvements</h4></a>
-        <p>Build environment <strong><a
-        href="{@docRoot}source/initializing.html#setting-up-a-mac-os-x-build-environment">Initializing</a></strong>
-        instructions now explain how to resize and unmount Mac OS sparse
-        images. And the ccache section has been moved to an optional <strong><a
-        href="{@docRoot}source/initializing.html#optimizing-a-build-environment">Optimizing
-        a build environment</a></strong> section.</p>
+        href="{@docRoot}devices/tech/security/verifiedboot/verified-boot.html#classes">Verifying
+        Boot</a></strong> has been rewritten to remove the VERIFIED state and Keystore
+        format and add details on implementation classes, communicating boot state, and
+        kernel command line parameters. And performance recommendations have been added
+        to <strong><a
+        href="{@docRoot}devices/tech/security/verifiedboot/dm-verity.html#optimize">Implementing
+        dm-verity</a></strong>.</p>
     </div>
 
     <div class="col-8">
@@ -104,7 +108,7 @@
         href="https://android.googlesource.com/">Android Open Source Project (AOSP)
         repository</a></strong> to make your changes available to everyone else
         in the Android ecosystem.</p>
-<a href="{@docRoot}source/index.html"><img border="0" src="images/android_framework_small.png" alt="Android framework summary" style="display:inline;float:left;margin:5px 10px"></a>
+<a href="{@docRoot}source/index.html"><img border="0" src="images/android_framework_small.png" alt="Android framework summary" style="display:inline;float:right;margin:5px 10px;width:42%;height:42%"></a>
       <a href="{@docRoot}devices/index.html">
         <h4>Port Android to Devices</h4></a>
         <p>Port the latest Android platform and
diff --git a/src/source/build-numbers.jd b/src/source/build-numbers.jd
index 395b613..185006d 100644
--- a/src/source/build-numbers.jd
+++ b/src/source/build-numbers.jd
@@ -178,6 +178,18 @@
 <th>Supported devices</th>
 </tr>
 <tr>
+  <td>LMY47Z</td>
+  <td>android-5.1.1_r4</td>
+  <td>Lollipop</td>
+  <td>Nexus 6 (For Sprint, USC ONLY)</td>
+</tr>
+<tr>
+  <td>LMY48B</td>
+  <td>android-5.1.1_r3</td>
+  <td>Lollipop</td>
+  <td>Nexus 5</td>
+</tr>
+<tr>
   <td>LMY47X</td>
   <td>android-5.1.1_r2</td>
   <td>Lollipop</td>
@@ -196,12 +208,24 @@
   <td>Nexus 4, Nexus 7 (flo/deb)</td>
 </tr>
 <tr>
+  <td>LMY47M</td>
+  <td>android-5.1.0_r4</td>
+  <td>Lollipop</td>
+  <td>Nexus 6 (For T-Mobile ONLY)</td>
+</tr>
+<tr>
   <td>LMY47I</td>
   <td>android-5.1.0_r3</td>
   <td>Lollipop</td>
   <td>Nexus 5, Nexus 6</td>
 </tr>
 <tr>
+  <td>LMY47E</td>
+  <td>android-5.1.0_r2</td>
+  <td>Lollipop</td>
+  <td>Nexus 6</td>
+</tr>
+<tr>
   <td>LMY47D</td>
   <td>android-5.1.0_r1</td>
   <td>Lollipop</td>
diff --git a/src/source/building-devices.jd b/src/source/building-devices.jd
index fee5254..f0d978e 100644
--- a/src/source/building-devices.jd
+++ b/src/source/building-devices.jd
@@ -2,7 +2,7 @@
 @jd:body
 
 <!--
-    Copyright 2013 The Android Open Source Project
+    Copyright 2015 The Android Open Source Project
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
@@ -28,31 +28,24 @@
 <a href="building-running.html">Building and Running</a> with
 information that is specific to individual devices.</p>
 
-<p>With the current release, it is possible to build for
-Nexus 4, Nexus 7, and for some variants of Galaxy Nexus.
-The exact level of functionality for each device depends on the availability
-of the relevant proprietary hardware-specific binaries.</p>
-<p>For Nexus 4 and Nexus 7, all configurations can be used,
-and all the hardware is functional.
-Due to hardware differences, do not use 4.1.1 on a Nexus 7 that
+<h2 class="nexus-devices">Nexus devices</h2>
+<p>
+It is possible to build for Nexus devices using the AOSP
+builds and the relevant hardware-specific binaries.
+For a list of available Android builds and the Nexus devices
+they can be installed on, see <a
+href="build-numbers.html#source-code-tags-and-builds">Source
+Code, Tags, and Builds</a>.
+</p>
+
+<p class="note">
+<b>Note:</b> Due to hardware differences, do not use 4.1.1 on a Nexus 7 that
 was originally sold with 4.1.2 or newer.</p>
-<p>All configurations of Nexus 10 "manta" can be used with 4.2.2.
-On those devices, graphics, audio,
-Wi-Fi, Bluetooth, camera, NFC, GPS and orientation sensors are functional.</p>
-<p>The variants of Galaxy Nexus that can be used are the GSM/HSPA+ configuration
-"maguro" (only if it was originally sold with a "yakju" or "takju" operating
-system) and the VZW CDMA/LTE configuration "toro". On those devices, graphics
-and audio are functional, as well as Wi-Fi, Bluetooth, and access to the
-respective cellular networks. NFC and the orientation sensors are functional.</p>
-<p>The Sprint CDMA/LTE configuration "toroplus" of Galaxy Nexus is supported
-experimentally, in the jb-mr1-dev-plus-aosp branch. On that configuration,
-the cellular network is not functional,
-and the other peripherals work like they do on "toro".</p>
+
+<h2 class="other-devices">Other devices</h2>
 <p>The Motorola Xoom can be used in the Wi-Fi configuration "wingray"
 sold in the USA, with Android 4.1.2. Graphics and audio are functional
 as well as Wi-Fi and Bluetooth and the orientation sensors.</p>
-<p>All configurations of Nexus S and Nexus S 4G can be used with Android 4.1.2.
-On those devices all the hardware is functional.</p>
 <p>In addition, <a href="http://pandaboard.org">PandaBoard</a> a.k.a. "panda" can be used
 in the jb-mr1-dev-plus-aosp branch, but is considered experimental.
 The specific details to use a PandaBoard with the Android Open-Source Project
@@ -64,6 +57,7 @@
 <a href="building-running.html">Building and Running</a>, and replace the main <code>make</code> command with</p>
 <pre><code>$ make fastboot adb
 </code></pre>
+
 <h2 id="booting-into-fastboot-mode">Booting into fastboot mode</h2>
 <p>During a cold boot, the following key combinations can be used to boot into fastboot mode,
 which is a mode in the bootloader that can be used to flash the devices:</p>
diff --git a/src/source/building.jd b/src/source/building.jd
index 408ddb1..78401da 100644
--- a/src/source/building.jd
+++ b/src/source/building.jd
@@ -21,14 +21,15 @@
 build tools available. We welcome reports of successes or failures on other
 distributions.</p>
 
-<p>Before you download and build the Android source, ensure your system meets the following requirements:</p>
+<p>Before you download and build the Android source, ensure your system meets
+the following requirements:</p>
 
 <ul>
 
   <li>A Linux or Mac OS system. It is also possible
   to build Android in a virtual machine on unsupported systems such as Windows.
   If you are running Linux in a virtual machine, you need at
-  least 16GB of RAM/swap and 50GB or more of disk space in order to
+  least 16GB of RAM/swap and 100GB or more of disk space in order to
   build the Android tree. See disk size requirements below.
   </li>
 
@@ -36,8 +37,8 @@
   branch. You can compile older versions on 32-bit systems.
   </li>
 
-  <li>At least 50GB of free disk space for a checkout, 100GB for a single
-  build, and 150GB or more for multiple builds. If you employ ccache, you will
+  <li>At least 100GB of free disk space for a checkout, 150GB for a single
+  build, and 200GB or more for multiple builds. If you employ ccache, you will
   need even more space.</p>
   </li>
 
diff --git a/src/source/community/index.jd b/src/source/community.jd
similarity index 100%
rename from src/source/community/index.jd
rename to src/source/community.jd
diff --git a/src/source/faqs.jd b/src/source/faqs.jd
index 42e52bf..6c01017 100644
--- a/src/source/faqs.jd
+++ b/src/source/faqs.jd
@@ -172,7 +172,7 @@
 in the ART runtime. Similarly, we won't accept contributions such as GPL
 or LGPL libraries that are incompatible with our licensing goals.</p>
 <p>We encourage those interested in contributing source code to contact us
-via the channels listed on the <a href="{@docRoot}source/community/index.html">
+via the channels listed on the <a href="{@docRoot}source/community.html">
 Android Community</a> page prior to beginning any work. You can find more
 information on this topic from the <a href="{@docRoot}source/contributing.html">
 Contributing</a> page.</p>
@@ -187,7 +187,7 @@
 Approvers are typically Google employees, but the same approvers are
 responsible for all submissions, regardless of origin.</p>
 <p>You can find more information on this topic at the <a href="submit-patches.html">Submitting Patches</a> page.</p>
-<a href="#top">Back to top</a>  
+<a href="#top">Back to top</a>
 <h2 id="compatibility">Compatibility</h2>
 <h3 id="what-does-compatibility-mean">What does "compatibility" mean?</h3>
 <p>We define an "Android-compatible device" as one that can run any
diff --git a/src/source/source_toc.cs b/src/source/source_toc.cs
index 84897f1..b707b43 100644
--- a/src/source/source_toc.cs
+++ b/src/source/source_toc.cs
@@ -1,5 +1,5 @@
 <!--
-    Copyright 2013 The Android Open Source Project
+    Copyright 2015 The Android Open Source Project
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
@@ -78,7 +78,7 @@
 
   <li class="nav-section">
     <div class="nav-section-header empty">
-      <a href="<?cs var:toroot ?>source/community/index.html">
+      <a href="<?cs var:toroot ?>source/community.html">
         <span class="en">Community</span>
       </a>
     </div>
diff --git a/src/source/using-eclipse.jd b/src/source/using-eclipse.jd
index 12ee1eb..33ef381 100644
--- a/src/source/using-eclipse.jd
+++ b/src/source/using-eclipse.jd
@@ -230,5 +230,5 @@
 </li>
 </ul>
 <p>If you're still having problems, please contact one of the <a
-href="{@docRoot}source/community/index.html">Android community mailing lists or
+href="{@docRoot}source/community.html">Android community mailing lists or
 IRC channels</a>.</p>