diff --git a/src/accessories/aoa.jd b/src/accessories/aoa.jd
index 7c728fe..8eb7723 100644
--- a/src/accessories/aoa.jd
+++ b/src/accessories/aoa.jd
@@ -20,17 +20,18 @@
 protocol, which defines how an accessory detects and sets up communication with
 an Android-powered device. Accessories should carry out the following steps:</p>
 
-<ul>
+<ol>
 <li>Wait for and detect a connected device.</li>
 <li>Determine the device's accessory mode support.</li>
 <li>Attempt to start the device in accessory mode (if needed).</li>
 <li>If the device supports AOA, establish communication with the device.</li>
-</ul>
+</ol>
 
 <p>The following sections explain how to implement these steps.</p>
 
-<p class="note">When developing a new accessory that connects to an Android
-device over USB, use <a href="{@docRoot}accessories/aoa2.html">AOAv2</a>.</p>
+<p class="note"><strong>Note:</strong> When developing a new accessory that
+connects to an Android device over USB, use
+<a href="{@docRoot}accessories/aoa2.html">AOAv2</a>.</p>
 
 <h2 id="wait-for-and-detect-connected-devices">Wait for and detect connected
 devices</h2>
@@ -79,14 +80,14 @@
 <p>If the vendor and product IDs do not correspond to an Android-powered device
 in accessory mode, the accessory cannot discern whether the device supports (but
 is not in) accessory mode or if the device does not support accessory mode. This
-can occur because devices that support accessory mode (but are not in that mode)
-initially report the <em>device</em> manufacturer vendor and product IDs instead
-of the <em>AOA</em> vendor and product IDs.</p>
+can occur because devices that support accessory mode (but are not in accessory
+mode) initially report the <em>device</em> manufacturer vendor and product IDs
+instead of the <em>AOA</em> vendor and product IDs.</p>
 
 <p>The accessory should try to start the device in accessory mode to determine
 if the device supports that mode:</p>
 
-<ul>
+<ol>
   <li>Send a 51 control request ("Get Protocol") to determine if the device
   supports the Android accessory protocol. If the device supports the protocol,
   it returns a non-zero number that represents the supported protocol version.
@@ -141,18 +142,23 @@
 data:           none
 </pre>
   </li>
-</ul>
+</ol>
 
 <p>After completing these steps, the accessory should wait for the connected USB
 device to re-introduce itself on the bus in accessory mode, then re-enumerate
-connected devices. The algorithm returns to
-<a href="#determine-accessory-mode-support">determine accessory mode support</a>
-to check the vendor and product IDs, which should be correct (e.g. correspond to
-Google's vendor and product IDs instead of the device manufacturer's IDs) if the
-device successfully switched to accessory mode. If IDs are correct, the
+connected devices. The algorithm
+<a href="#determine-accessory-mode-support">determines accessory mode support</a>
+by checking the vendor and product IDs, which should be correct (e.g. correspond
+to Google's vendor and product IDs instead of the device manufacturer's IDs) if
+the device successfully switched to accessory mode. If IDs are correct, the
 accessory moves to <a href="#establish-communication-with-the-device">establish
 communication with the device</a>.</p>
 
+<p class="note"><strong>Note:</strong> AOA does not currently support
+simultaneous AOA and MTP connections. To switch from AOA to MTP, the accessory
+must first disconnect the USB device (either physically or in an electrically
+equivalent way) then reconnect using MTP.</p>
+
 <p>If any step fails, the accessory determines the device does not support
 Android accessory mode and waits for the next device to connect.</p>
 
diff --git a/src/compatibility/5.0/android-5.0-cdd.html b/src/compatibility/5.0/android-5.0-cdd.html
index 6334c85..1abf06b 100644
--- a/src/compatibility/5.0/android-5.0-cdd.html
+++ b/src/compatibility/5.0/android-5.0-cdd.html
@@ -5169,9 +5169,9 @@
 <h2 id=9_7_kernel_security_features>9.7. Kernel Security Features</h2>
 
 
-<p>The Android Sandbox includes features that can use the Security-Enhanced Linux
+<p>The Android Sandbox includes features that use the Security-Enhanced Linux
 (SELinux) mandatory access control (MAC) system and other security features in
-the Linux kernel. SELinux or any other security features, if implemented below
+the Linux kernel. SELinux or any other security features implemented below
 the Android framework:</p>
 
 <ul>
@@ -5186,30 +5186,26 @@
 affect another application (such as a Device Administration API), the API MUST
 NOT allow configurations that break compatibility. </p>
 
-<p>Devices MUST implement SELinux or an equivalent mandatory access control system
-if using a kernel other than Linux and meet the following requirements, which
+<p>Devices MUST implement SELinux or, if using a kernel other than Linux, an equivalent mandatory access control system.
+Devices must also meet the following requirements, which
 are satisfied by the reference implementation in the upstream Android Open
 Source Project.</p>
 
 <p>Device implementations:</p>
 
 <ul>
-  <li> MUST support a SELinux policy that allows the SELinux mode to be set on a
-per-domain basis, and MUST configure all domains in enforcing mode. No
+  <li> MUST set SELinux to global enforcing mode,
+  <li> MUST configure all domains in enforcing mode. No
 permissive mode domains are allowed, including domains specific to a
-device/vendor
-  <li> SHOULD load policy from /sepolicy file on the device
+device/vendor.
   <li> MUST NOT modify, omit, or replace the neverallow rules present within the
-sepolicy file provided in the upstream Android Open Source Project (AOSP) and
-the policy MUST compile with all neverallow present, for both AOSP SELinux
-domains as well as device/vendor specific domains
-  <li> MUST support dynamic updates of the SELinux policy file without requiring a
-system image update
+external/sepolicy folder provided in the upstream Android Open Source Project (AOSP) and
+the policy MUST compile with all neverallow rules present, for both AOSP SELinux
+domains as well as device/vendor specific domains.
 </ul>
 
-<p>Device implementations SHOULD retain the default SELinux policy provided in the
-upstream Android Open Source Project, until they have first audited their
-additions to the SELinux policy. Device implementations MUST be compatible with
+<p>Device implementations SHOULD retain the default SELinux policy provided in the external/sepolicy folder of the
+upstream Android Open Source Project and only further add to this policy for their own device-specific configuration. Device implementations MUST be compatible with
 the upstream Android Open Source Project.</p>
 
 <h2 id=9_8_privacy>9.8. Privacy</h2>
diff --git a/src/compatibility/5.1/CDD_README.txt b/src/compatibility/5.1/CDD_README.txt
new file mode 100644
index 0000000..f6901a2
--- /dev/null
+++ b/src/compatibility/5.1/CDD_README.txt
@@ -0,0 +1,93 @@
+WKTHMLTOPDF README
+==================
+Or, how I stopped hating the cdd and learned to love html-to-pdf conversions.
+
+
+OVERVIEW
+==================
+TL:DR This document describes how to create a CDD.pdf from the CDD.html file. You need to generate a cover file and a body file, then use Adobe Acrobat to insert the cover page into the body.pdf.
+
+The Android Compatibilty Definition Document (CDD) is maintained as an html file but distributed as a .pdf. The partner team updates the CDD for every new major Android release and the APE doc team posts the new .pdf to source.android.com in http://source.android.com/compatibility/.
+
+To create the pdf from the html file, use wkhtmltopdf (http://wkhtmltopdf.org/) plus a little bit of Adobe Acrobat. You can do the conversion on a Mac or Linux (or even Windows); you just need to download the wkhtmltopdf pkg for your system. However, since you must use Adobe Acrobat Pro (not Reader) to insert the cover page, you must perform this step on a Mac or Windows box (none of the Linux PDF apps can do the swap successfully and still maintain the PDF bookmarks and links)
+
+
+1. INSTALL WKHTMLTOPDF
+====================
+Go to http://wkhtmltopdf.org/ and download the app for your system. It's command line only.
+
+
+2. GENERATE COVER PDF
+======================
+
+Syntax:
+
+wkthmltopdf [page-size] [page-margins] cover path-to-html path-to-pdf
+
+page-size
+Set to letter.
+Ex. -s letter
+
+page-margins
+set to 0in (cover goes all the way to page edges)
+Ex. -B 0in -T 0in -L 0in -R 0in
+
+path-to-html
+The full path (from root, including the filename) to the cover html file. You will need to update the cover text to specify the release name , number, and date. You might also need to swap the image out for the image associated with the release (store images in compatibility/images).
+Ex:
+/usr/local/google/home/hvm/Projects/internal/lmp-mr1-dev/docs/source.android.com/src/compatibility/5.1/android-cdd-cover_5_1.html
+
+path-to-pdf
+The full path (from root, including the filename) to where you want the output pdf file to reside. If the pdf file is NOT open (in Preview or some other app), running the command will silently overwrite the existing .pdf.
+Ex.
+/usr/local/google/home/hvm/Projects/internal/lmp-mr1-dev/docs/source.android.com/src/compatibility/5.1/android-cdd-cover.pdf
+
+
+Example cover command:
+
+wkhtmltopdf -s letter -B 0in -T 0in -L 0in -R 0in cover /usr/local/google/home/hvm/Projects/internal/lmp-mr1-dev/docs/source.android.com/src/compatibility/5.1/android-cdd-cover_5_1.html /usr/local/google/home/hvm/Projects/internal/lmp-mr1-dev/docs/source.android.com/src/compatibility/5.1/android-cdd-cover.pdf
+
+
+3. GENERATE BODY PDF
+====================
+Syntax:
+
+wkthmltopdf [page-margins] page path-to-html path-to-footer path-to-pdf
+
+page-margins
+set to 1in on top and bottom, .75in on left and right.
+Ex. -B 1in -T 1in -L .75in -R .75in
+
+path-to-html
+The full path (from root, including the filename) to the body html file. This is the main cdd.html, which will change with each release.
+Ex.
+/usr/local/google/home/hvm/Projects/internal/lmp-mr1-dev/docs/source.android.com/src/compatibility/5.1/android-5.1-cdd.html
+
+path-to-footer
+The full path (from root, including the filename) to the footer html file. This is a simple html file that contains the android logo and some javascript to calculate the page number and count. The footer should NOT change from release to release.
+Ex.
+--footer-html /usr/local/google/home/hvm/Projects/internal/lmp-mr1-dev/docs/source.android.com/src/compatibility/5.1/android-cdd-footer.html
+
+
+path-to-pdf
+The full path (from root, including the filename) to where you want the output pdf file to reside. If the pdf file is NOT open (in Preview or some other app), running the command will silently overwrite the existing .pdf.
+Ex.
+/usr/local/google/home/hvm/Projects/internal/lmp-mr1-dev/docs/source.android.com/src/compatibility/5.1/android-cdd-body.pdf
+
+
+Example body command:
+
+wkhtmltopdf -B 1in -T 1in -L .75in -R .75in page /usr/local/google/home/hvm/Projects/internal/lmp-mr1-dev/docs/source.android.com/src/compatibility/5.1/android-5.1-cdd.html --footer-html /usr/local/google/home/hvm/Projects/internal/lmp-mr1-dev/docs/source.android.com/src/compatibility/5.1/android-cdd-footer.html /usr/local/google/home/hvm/Projects/internal/lmp-mr1-dev/docs/source.android.com/src/compatibility/5.1/android-cdd-body.pdf
+
+4. CREATE CSS PDF
+==================
+A. Open the body.pdf in Adobe Acrobat Pro (you *cannot* use Acrobat Reader for this task).
+B. Select Tools > Replace, then open the cover.pdf file and replace page 1 of the body.pdf with page 1 of the cover.pdf.
+C. Save the new file as the android-cdd_x_x.pdf (where X_X is the number of the release, such as 5.1).
+
+QUESTIONS?
+==================
+- For details on wkhtmltopdf, see http://wkhtmltopdf.org/usage/wkhtmltopdf.txt.
+- all cdd html, css, and current pdf files are in docs/source.android.com/src/compatibility/release-number (currently 5.1).
+- all cdd images are in docs/source.android.com/src/compatibility/images.
+- all files currently in the lmp-dev-mr1 branch.
\ No newline at end of file
diff --git a/src/compatibility/5.1/android-5.1-cdd.html b/src/compatibility/5.1/android-5.1-cdd.html
index a53df74..95ab547 100644
--- a/src/compatibility/5.1/android-5.1-cdd.html
+++ b/src/compatibility/5.1/android-5.1-cdd.html
@@ -4253,7 +4253,7 @@
 
 <p>
 Verified boot is a feature that guarantees the integrity of the device software.
-If a device implementation supports the feature, it MUST:
+If a device implementation supports the feature, it MUST:</p>
 <ul>
 <li>Declare the platform feature flag android.software.verified_boot</li>
 <li>Perform verification on every boot sequence</li>
@@ -4264,7 +4264,6 @@
 <li>Use verification algorithms as strong as current recommendations
 from NIST for hashing algorithms (SHA-256) and public key sizes (RSA-2048)</li>
 </ul>
-</p>
 
 <p>Device implementations SHOULD support verified boot for device integrity.
 While this requirement is SHOULD for this version of the Android platform,
@@ -4409,7 +4408,7 @@
         Automotive implementations.</td>
  </tr>
  <tr>
-    <td>3.8.10. Lock Screen Media Control<</td>
+    <td>3.8.10. Lock Screen Media Control</td>
     <td>Clarified requirement for Android Watch and Automotive implementations.</td>
  </tr>
  <tr>
diff --git a/src/compatibility/5.1/android-cdd-cover.css b/src/compatibility/5.1/android-cdd-cover.css
index 7364deb..04133d6 100644
--- a/src/compatibility/5.1/android-cdd-cover.css
+++ b/src/compatibility/5.1/android-cdd-cover.css
@@ -83,4 +83,4 @@
 p {
     margin: 0px;
     padding: 0px;
-}
\ No newline at end of file
+}
diff --git a/src/compatibility/5.1/android-cdd-cover_5_1.html b/src/compatibility/5.1/android-cdd-cover_5_1.html
index 12461b9..e3bb542 100644
--- a/src/compatibility/5.1/android-cdd-cover_5_1.html
+++ b/src/compatibility/5.1/android-cdd-cover_5_1.html
@@ -39,4 +39,4 @@
 </table>
 
 </body>
-</html>
\ No newline at end of file
+</html>
diff --git a/src/compatibility/android-cdd.html b/src/compatibility/android-cdd.html
new file mode 100644
index 0000000..ac1867b
--- /dev/null
+++ b/src/compatibility/android-cdd.html
@@ -0,0 +1,4802 @@
+<!DOCTYPE html>
+<head>
+<title>Android ANDROID_VERSION Compatibility Definition</title>
+<link rel="stylesheet" type="text/css" href="source/android-cdd.css"/>
+</head>
+
+<body>
+
+<h6>Table of Contents</h6>
+
+<div id="toc">
+
+<div id="toc_left">
+
+<p class="toc_h1"><a href="#1_introduction">1. Introduction</a></p>
+
+<p class="toc_h1"><a href="#2_device_types">2. Device Types</a></p>
+
+<p class="toc_h2"><a href="#2_1_device_configurations">2.1 Device Configurations</a></p>
+
+<p class="toc_h1"><a href="#3_software">3. Software</a></p>
+
+<p class="toc_h2"><a href="#3_1_managed_api_compatibility">3.1. Managed API Compatibility</a></p>
+
+<p class="toc_h2"><a href="#3_2_soft_api_compatibility">3.2. Soft API Compatibility</a></p>
+
+<p class="toc_h3"><a href="#3_2_1_permissions">3.2.1. Permissions</a></p>
+
+<p class="toc_h3"><a href="#3_2_2_build_parameters">3.2.2. Build Parameters</a></p>
+
+<p class="toc_h3"><a href="#3_2_3_intent_compatibility">3.2.3. Intent Compatibility</a></p>
+
+<p class="toc_h4"><a href="#3_2_3_1_core_application_intents">3.2.3.1. Core Application Intents</a></p>
+
+<p class="toc_h4"><a href="#3_2_3_2_intent_overrides">3.2.3.2. Intent Overrides</a></p>
+
+<p class="toc_h4"><a href="#3_2_3_3_intent_namespaces">3.2.3.3. Intent Namespaces</a></p>
+
+<p class="toc_h4"><a href="#3_2_3_4_broadcast_intents">3.2.3.4. Broadcast Intents</a></p>
+
+<p class="toc_h4"><a href="#3_2_3_5_default_app_settings">3.2.3.5. Default App Settings</a></p>
+
+<p class="toc_h2"><a href="#3_3_native_api_compatibility">3.3. Native API Compatibility</a></p>
+
+<p class="toc_h3"><a href="#3_3_1_application_binary_interfaces">3.3.1. Application Binary Interfaces</a></p>
+
+<p class="toc_h3"><a href="#3_3_2_32-bit_arm_native_code_compatibility">3.3.2. 32-bit ARM Native Code Compatibility</a></p>
+
+<p class="toc_h2"><a href="#3_4_web_compatibility">3.4. Web Compatibility</a></p>
+
+<p class="toc_h3"><a href="#3_4_1_webview_compatibility">3.4.1. WebView Compatibility</a></p>
+
+<p class="toc_h3"><a href="#3_4_2_browser_compatibility">3.4.2. Browser Compatibility</a></p>
+
+<p class="toc_h2"><a href="#3_5_api_behavioral_compatibility">3.5. API Behavioral Compatibility</a></p>
+
+<p class="toc_h2"><a href="#3_6_api_namespaces">3.6. API Namespaces</a></p>
+
+<p class="toc_h2"><a href="#3_7_runtime_compatibility">3.7. Runtime Compatibility</a></p>
+
+<p class="toc_h2"><a href="#3_8_user_interface_compatibility">3.8. User Interface Compatibility</a></p>
+
+<p class="toc_h3"><a href="#3_8_1_launcher_home_screen">3.8.1. Launcher (Home Screen)</a></p>
+
+<p class="toc_h3"><a href="#3_8_2_widgets">3.8.2. Widgets</a></p>
+
+<p class="toc_h3"><a href="#3_8_3_notifications">3.8.3. Notifications</a></p>
+
+<p class="toc_h3"><a href="#3_8_4_search">3.8.4. Search</a></p>
+
+<p class="toc_h3"><a href="#3_8_5_toasts">3.8.5. Toasts</a></p>
+
+<p class="toc_h3"><a href="#3_8_6_themes">3.8.6. Themes</a></p>
+
+<p class="toc_h3"><a href="#3_8_7_live_wallpapers">3.8.7. Live Wallpapers</a></p>
+
+<p class="toc_h3"><a href="#3_8_8_activity_switching">3.8.8. Activity Switching</a></p>
+
+<p class="toc_h3"><a href="#3_8_9_input_management">3.8.9. Input Management</a></p>
+
+<p class="toc_h3"><a href="#3_8_10_lock_screen_media_control">3.8.10. Lock Screen Media Control</a></p>
+
+<p class="toc_h3"><a href="#3_8_11_dreams">3.8.11. Dreams</a></p>
+
+<p class="toc_h3"><a href="#3_8_12_location">3.8.12. Location</a></p>
+
+<p class="toc_h3"><a href="#3_8_13_unicode_and_font">3.8.13. Unicode and Font</a></p>
+
+
+
+</div>
+
+<div id="toc_right"><br>
+
+
+
+<p class="toc_h2"><a href="#3_9_device_administration">3.9. Device Administration</a></p>
+
+<p class="toc_h2"><a href="#3_10_accessibility">3.10. Accessibility</a></p>
+
+<p class="toc_h2"><a href="#3_11_text-to-speech">3.11. Text-to-Speech</a></p>
+
+<p class="toc_h2"><a href="#3_12_tv_input_framework">3.12. TV Input Framework</a></p>
+
+<p class="toc_h1"><a href="#4_application_packaging_compatibility">4. Application Packaging Compatibility</a></p>
+
+<p class="toc_h1"><a href="#5_multimedia_compatibility">5. Multimedia Compatibility</a></p>
+
+<p class="toc_h2"><a href="#5_1_media_codecs">5.1. Media Codecs</a></p>
+
+<p class="toc_h3"><a href="#5_1_1_audio_codecs">5.1.1. Audio Codecs</a></p>
+
+<p class="toc_h3"><a href="#5_1_2_image_codecs">5.1.2. Image Codecs</a></p>
+
+<p class="toc_h3"><a href="#5_1_3_video_codecs">5.1.3. Video Codecs</a></p>
+
+<p class="toc_h2"><a href="#5_2_video_encoding">5.2. Video Encoding</a></p>
+
+<p class="toc_h2"><a href="#5_3_video_decoding">5.3. Video Decoding</a></p>
+
+<p class="toc_h2"><a href="#5_4_audio_recording">5.4. Audio Recording</a></p>
+
+<p class="toc_h3"><a href="#5_4_1_raw_audio_capture">5.4.1. Raw Audio Capture</a></p>
+
+<p class="toc_h3"><a href="#5_4_2_capture_for_voice_recognition">5.4.2. Capture for Voice Recognition</a></p>
+
+<p class="toc_h3"><a href="#5_4_3_capture_for_rerouting_of_playback">5.4.3. Capture for Rerouting of Playback</a></p>
+
+<p class="toc_h2"><a href="#5_5_audio_playback">5.5. Audio Playback</a></p>
+
+<p class="toc_h3"><a href="#5_5_1_raw_audio_playback">5.5.1. Raw Audio Playback</a></p>
+
+<p class="toc_h3"><a href="#5_5_2_audio_effects">5.5.2. Audio Effects</a></p>
+
+<p class="toc_h3"><a href="#5_5_3_audio_output_volume">5.5.3. Audio Output Volume</a></p>
+
+<p class="toc_h2"><a href="#5_6_audio_latency">5.6. Audio Latency</a></p>
+
+<p class="toc_h2"><a href="#5_7_network_protocols">5.7. Network Protocols</a></p>
+
+<p class="toc_h2"><a href="#5_8_secure_media">5.8. Secure Media</a></p>
+
+<p class="toc_h2"><a href="#5_9_midi">5.9. Musical Instrument Digital Interface (MIDI)</a></p>
+
+<p class="toc_h1"><a href="#6_developer_tools_and_options_compatibility">6. Developer Tools and Options Compatibility</a></p>
+
+<p class="toc_h2"><a href="#6_1_developer_tools">6.1. Developer Tools</a></p>
+
+<p class="toc_h2"><a href="#6_2_developer_options">6.2. Developer Options</a></p>
+
+<p class="toc_h1"><a href="#7_hardware_compatibility">7. Hardware Compatibility</a></p>
+
+<p class="toc_h2"><a href="#7_1_display_and_graphics">7.1. Display and Graphics</a></p>
+
+<p class="toc_h3"><a href="#7_1_1_screen_configuration">7.1.1. Screen Configuration</a></p>
+
+<p class="toc_h4"><a href="#7_1_1_1_screen_size">7.1.1.1. Screen Size</a></p>
+
+<p class="toc_h4"><a href="#7_1_1_2_screen_aspect_ratio">7.1.1.2. Screen Aspect Ratio</a></p>
+
+<p class="toc_h4"><a href="#7_1_1_3_screen_density">7.1.1.3. Screen Density</a></p>
+
+
+</div>
+
+<div style="clear: both; page-break-after:always; height:1px"></div>
+
+
+<div id="toc_left_2">
+
+<p class="toc_h3"><a href="#7_1_2_display_metrics">7.1.2. Display Metrics</a></p>
+
+<p class="toc_h3"><a href="#7_1_3_screen_orientation">7.1.3. Screen Orientation</a></p>
+
+<p class="toc_h3"><a href="#7_1_4_2d_and_3d_graphics_acceleration">7.1.4. 2D and 3D Graphics Acceleration</a></p>
+
+<p class="toc_h3"><a href="#7_1_5_legacy_application_compatibility_mode">7.1.5. Legacy Application Compatibility Mode</a></p>
+
+<p class="toc_h3"><a href="#7_1_6_screen_technology">7.1.6. Screen Technology</a></p>
+
+<p class="toc_h3"><a href="#7_1_7_external_displays">7.1.7. Secondary Displays</a></p>
+
+<p class="toc_h2"><a href="#7_2_input_devices">7.2. Input Devices</a></p>
+
+<p class="toc_h3"><a href="#7_2_1_keyboard">7.2.1. Keyboard</a></p>
+
+<p class="toc_h3"><a href="#7_2_2_non-touch_navigation">7.2.2. Non-touch Navigation</a></p>
+
+<p class="toc_h3"><a href="#7_2_3_navigation_keys">7.2.3. Navigation Keys</a></p>
+
+<p class="toc_h3"><a href="#7_2_4_touchscreen_input">7.2.4. Touchscreen Input</a></p>
+
+<p class="toc_h3"><a href="#7_2_5_fake_touch_input">7.2.5. Fake Touch Input</a></p>
+
+<p class="toc_h3"><a href="#7_2_6_game_controller_support">7.2.6. Game Controller Support</a></p>
+
+<p class="toc_h4"><a href="#7_2_6_1_button_mapping">7.2.6.1. Button Mappings</a></p>
+
+<p class="toc_h3"><a href="#7_2_7_remote_control">7.2.7. Remote Control</a></p>
+
+<p class="toc_h2"><a href="#7_3_sensors">7.3. Sensors</a></p>
+
+<p class="toc_h3"><a href="#7_3_1_accelerometer">7.3.1. Accelerometer</a></p>
+
+<p class="toc_h3"><a href="#7_3_2_magnetometer">7.3.2. Magnetometer</a></p>
+
+<p class="toc_h3"><a href="#7_3_3_gps">7.3.3. GPS</a></p>
+
+<p class="toc_h3"><a href="#7_3_4_gyroscope">7.3.4. Gyroscope</a></p>
+
+<p class="toc_h3"><a href="#7_3_5_barometer">7.3.5. Barometer</a></p>
+
+<p class="toc_h3"><a href="#7_3_6_thermometer">7.3.6. Thermometer</a></p>
+
+<p class="toc_h3"><a href="#7_3_7_photometer">7.3.7. Photometer</a></p>
+
+<p class="toc_h3"><a href="#7_3_8_proximity_sensor">7.3.8. Proximity Sensor</a></p>
+
+<p class="toc_h2"><a href="#7_4_data_connectivity">7.4. Data Connectivity</a></p>
+
+<p class="toc_h3"><a href="#7_4_1_telephony">7.4.1. Telephony</a></p>
+
+<p class="toc_h3"><a href="#7_4_2_ieee_80211_wi-fi">7.4.2. IEEE 802.11 (Wi-Fi)</a></p>
+
+<p class="toc_h4"><a href="#7_4_2_1_wi-fi_direct">7.4.2.1. Wi-Fi Direct</a></p>
+
+<p class="toc_h4"><a href="#7_4_2_2_wi-fi-tunneled-direct-link-setup">7.4.2.2. Wi-Fi Tunneled Direct Link Setup</a></p>
+
+<p class="toc_h3"><a href="#7_4_3_bluetooth">7.4.3. Bluetooth</a></p>
+
+<p class="toc_h3"><a href="#7_4_4_near-field_communications">7.4.4. Near-Field Communications</a></p>
+
+<p class="toc_h3"><a href="#7_4_5_minimum_network_capability">7.4.5. Minimum Network Capability</a></p>
+
+<p class="toc_h3"><a href="#7_4_6_sync_settings">7.4.6. Sync Settings</a></p>
+
+<p class="toc_h2"><a href="#7_5_cameras">7.5. Cameras</a></p>
+
+<p class="toc_h3"><a href="#7_5_1_rear-facing_camera">7.5.1. Rear-Facing Camera</a></p>
+
+<p class="toc_h3"><a href="#7_5_2_front-facing_camera">7.5.2. Front-Facing Camera</a></p>
+
+<p class="toc_h3"><a href="#7_5_3_external_camera">7.5.3. External Camera</a></p>
+
+<p class="toc_h3"><a href="#7_5_4_camera_api_behavior">7.5.4. Camera API Behavior</a></p>
+
+
+
+
+
+</div>
+
+<div id="toc_right_2">
+
+<p class="toc_h3"><a href="#7_5_5_camera_orientation">7.5.5. Camera Orientation</a></p>
+
+<p class="toc_h2"><a href="#7_6_memory_and_storage">7.6. Memory and Storage</a></p>
+
+<p class="toc_h3"><a href="#7_6_1_minimum_memory_and_storage">7.6.1. Minimum Memory and Storage</a></p>
+
+<p class="toc_h3"><a href="#7_6_2_application_shared_storage">7.6.2. Application Shared Storage</a></p>
+
+<p class="toc_h2"><a href="#7_7_usb">7.7. USB</a></p>
+
+<p class="toc_h2"><a href="#7_8_audio">7.8. Audio</a></p>
+
+<p class="toc_h3"><a href="#7_8_1_microphone">7.8.1. Microphone</a></p>
+
+<p class="toc_h3"><a href="#7_8_2_audio_output">7.8.2. Audio Output</a></p>
+
+<p class="toc_h4"><a href="#7_8_2_1_analog_audio_ports">7.8.2.1. Analog Audio Ports</a></p>
+
+<p class="toc_h1"><a href="#8_performance_compatibility">8. Performance Compatibility</a></p>
+
+<p class="toc_h2"><a href="#8_1_user_experience_consistency">8.1. User Experience Consistency</a></p>
+
+<p class="toc_h2"><a href="#8_2_memory_performance">8.2. Memory Performance</a></p>
+
+<p class="toc_h1"><a href="#9_security_model_compatibility">9. Security Model Compatibility</a></p>
+
+<p class="toc_h2"><a href="#9_1_permissions">9.1. Permissions</a></p>
+
+<p class="toc_h2"><a href="#9_2_uid_and_process_isolation">9.2. UID and Process Isolation</a></p>
+
+<p class="toc_h2"><a href="#9_3_filesystem_permissions">9.3. Filesystem Permissions</a></p>
+
+<p class="toc_h2"><a href="#9_4_alternate_execution_environments">9.4. Alternate Execution Environments</a></p>
+
+<p class="toc_h2"><a href="#9_5_multi-user_support">9.5. Multi-User Support</a></p>
+
+<p class="toc_h2"><a href="#9_6_premium_sms_warning">9.6. Premium SMS Warning</a></p>
+
+<p class="toc_h2"><a href="#9_7_kernel_security_features">9.7. Kernel Security Features</a></p>
+
+<p class="toc_h2"><a href="#9_8_privacy">9.8. Privacy</a></p>
+
+<p class="toc_h2"><a href="#9_9_full-disk-encryption">9.9. Full-Disk Encryption</a></p>
+
+<p class="toc_h2"><a href="#9_10_verified_boot">9.10. Verified Boot</a></p>
+
+<p class="toc_h1"><a href="#10_software_compatibility_testing">10. Software Compatibility Testing</a></p>
+
+<p class="toc_h2"><a href="#10_1_compatibility_test_suite">10.1. Compatibility Test Suite</a></p>
+
+<p class="toc_h2"><a href="#10_2_cts_verifier">10.2. CTS Verifier</a></p>
+
+<p class="toc_h1"><a href="#11_updatable_software">11. Updatable Software</a></p>
+
+<p class="toc_h1"><a href="#12_document_changelog">12. Document Changelog</a></p>
+
+<p class="toc_h1"><a href="#13_contact_us">13. Contact Us</a></p>
+
+<p class="toc_h1"><a href="#14_resources">14. Resources</a></p>
+
+</div>
+
+</div>
+
+<div style="clear: both"></div>
+
+<div id="main">
+
+<h1 id="1_introduction">1. Introduction</h1>
+
+
+<p>This document enumerates the requirements that must be met in order for devices
+to be compatible with Android ANDROID_VERSION.</p>
+
+<p>The use of &ldquo;MUST&rdquo;, &ldquo;MUST NOT&rdquo;, &ldquo;REQUIRED&rdquo;, &ldquo;SHALL&rdquo;, &ldquo;SHALL NOT&rdquo;, &ldquo;SHOULD&rdquo;,&ldquo;SHOULD NOT&rdquo;, &ldquo;RECOMMENDED&rdquo;, &ldquo;MAY&rdquo;, and &ldquo;OPTIONAL&rdquo; is per the IETF standard
+defined in RFC2119 [<a href="http://www.ietf.org/rfc/rfc2119.txt">Resources, 1</a>].</p>
+
+<p>As used in this document, a &ldquo;device implementer&rdquo; or &ldquo;implementer&rdquo; is a person
+or organization developing a hardware/software solution running Android ANDROID_VERSION. A
+&ldquo;device implementation&rdquo; or &ldquo;implementation is the hardware/software solution
+so developed.</p>
+
+<p>To be considered compatible with Android ANDROID_VERSION, device implementations MUST meet
+the requirements presented in this Compatibility Definition, including any
+documents incorporated via reference.</p>
+
+<p>Where this definition or the software tests described in <a href="#10_software_compatibility_testing">section 10</a> is silent, ambiguous, or incomplete, it is the responsibility of the device
+implementer to ensure compatibility with existing implementations.</p>
+
+<p>For this reason, the Android Open Source Project [<a href="http://source.android.com/">Resources, 2</a>] is both the reference and preferred implementation of Android. Device
+implementers are strongly encouraged to base their implementations to the
+greatest extent possible on the &ldquo;upstream&rdquo; source code available from the
+Android Open Source Project. While some components can hypothetically be
+replaced with alternate implementations this practice is strongly discouraged,
+as passing the software tests will become substantially more difficult. It is
+the implementer&rsquo;s responsibility to ensure full behavioral compatibility with
+the standard Android implementation, including and beyond the Compatibility
+Test Suite. Finally, note that certain component substitutions and
+modifications are explicitly forbidden by this document.</p>
+
+<p>Many of the resources listed in <a href="#14_resources">section 14</a> are derived directly or indirectly from the Android SDK, and will be
+functionally identical to the information in that SDK&rsquo;s documentation. For any
+case where this Compatibility Definition or the Compatibility Test Suite
+disagrees with the SDK documentation, the SDK documentation is considered
+authoritative. Any technical details provided in the references included in <a href="#14_resources">section 14</a> are considered by inclusion to be part of this Compatibility Definition. </p>
+
+<h1 id="2_device_types">2. Device Types</h1>
+
+
+<p>While the Android Open Source Project has been used in the implementation of a
+variety of device types and form factors, many aspects of the architecture and
+compatibility requirements were optimized for handheld devices. Starting from
+Android 5.0, the Android Open Source Project aims to embrace a wider variety of
+device types as described in this section.</p>
+
+<p><strong>Android Handheld device</strong> refers to an Android device implementation that is typically used by holding
+it in the hand, such as mp3 players, phones, and tablets. Android Handheld
+device implementations:</p>
+
+<ul>
+  <li>MUST have a touchscreen embedded in the device.</li>
+  <li>MUST have a power source that provides mobility, such as a battery.</li>
+</ul>
+
+<p><strong>Android Television device</strong> refers to an Android device implementation that is an entertainment interface
+for consuming digital media, movies, games, apps, and/or live TV for users
+sitting about ten feet away (a &ldquo;lean back&rdquo; or &ldquo;10-foot user interface&rdquo;).
+Android Television devices:</p>
+
+<ul>
+  <li>MUST have an embedded screen OR include a video output port, such as VGA, HDMI,
+or a wireless port for display.</li>
+  <li>MUST declare the features android.software.leanback and
+android.hardware.type.television [<a href="http://developer.android.com/reference/android/content/pm/PackageManager.html#FEATURE_LEANBACK">Resources, 3</a>].</li>
+</ul>
+
+<p><strong>Android Watch device</strong> refers to an Android device implementation intended to be worn on the body,
+perhaps on the wrist, and:</p>
+
+<ul>
+  <li>MUST have a screen with the physical diagonal length in the range from 1.1 to
+2.5 inches.</li>
+  <li>MUST declare the feature android.hardware.type.watch.</li>
+  <li>MUST support uiMode = UI_MODE_TYPE_WATCH [<a href="http://developer.android.com/reference/android/content/res/Configuration.html#UI_MODE_TYPE_WATCH">Resources, 4</a>].</li>
+</ul>
+
+<p><strong>Android Automotive implementation</strong> refers to a vehicle head
+unit running Android as an operating system for part or all of the system and/or
+infotainment functionality. Android Automotive implementations MUST support
+uiMode = UI_MODE_TYPE_CAR [<a href="http://developer.android.com/reference/android/content/res/Configuration.html#UI_MODE_TYPE_CAR">Resources, 111</a>].</p>
+
+<p>All Android device implementations that do not fit into any of the above device
+types still MUST meet all requirements in this document to be Android ANDROID_VERSION
+compatible, unless the requirement is explicitly described to be only
+applicable to a specific Android device type from above.</p>
+
+<h2 id="2_1_device_configurations">2.1 Device Configurations</h2>
+
+
+<p>This is a summary of major differences in hardware configuration by device
+type. (Empty cells denote a &ldquo;MAY&rdquo;). Not all configurations are covered in this
+table; see relevant hardware sections for more detail.</p>
+<table>
+ <tr>
+    <th>Category</th>
+    <th>Feature</th>
+    <th>Section</th>
+    <th>Handheld</th>
+    <th>Television</th>
+    <th>Watch</th>
+    <th>Automotive</th>
+    <th>Other</th>
+ </tr>
+ <tr>
+    <td rowspan="3">Input</td>
+    <td>D-pad</td>
+    <td><a href="#7_2_2_non-touch-navigation">7.2.2. Non-touch Navigation</a></td>
+    <td></td>
+    <td>MUST</td>
+    <td></td>
+    <td></td>
+    <td></td>
+ </tr>
+ <tr>
+    <td>Touchscreen </td>
+    <td><a href="#7_2_4_touchscreen_input">7.2.4. Touchscreen input</a></td>
+    <td>MUST</td>
+    <td></td>
+    <td>MUST</td>
+    <td></td>
+    <td>SHOULD</td>
+ </tr>
+ <tr>
+    <td>Microphone </td>
+    <td><a href="#7_8_1_microphone">7.8.1. Microphone</a></td>
+    <td>MUST</td>
+    <td>SHOULD </td>
+    <td>MUST</td>
+    <td>MUST</td>
+    <td>SHOULD</td>
+ </tr>
+ <tr>
+    <td rowspan="2">Sensors</td>
+    <td>Accelerometer </td>
+    <td><a href="#7_3_1_accelerometer">7.3.1 Accelerometer</a></td>
+    <td>SHOULD</td>
+    <td></td>
+    <td>SHOULD</td>
+    <td></td>
+    <td>SHOULD</td>
+ </tr>
+ <tr>
+    <td>GPS</td>
+    <td><a href="#7_3_3_gps">7.3.3. GPS</a></td>
+    <td>SHOULD</td>
+    <td></td>
+    <td></td>
+    <td>SHOULD</td>
+    <td></td>
+ </tr>
+ <tr>
+    <td rowspan="5">Connectivity</td>
+    <td>Wi-Fi</td>
+    <td><a href="#7_4_2_ieee_802.11">7.4.2. IEEE 802.11</a></td>
+    <td>SHOULD</td>
+    <td> MUST</td>
+    <td></td>
+    <td>SHOULD</td>
+    <td>SHOULD</td>
+ </tr>
+ <tr>
+    <td>Wi-Fi Direct</td>
+    <td><a href="#7_4_2_1_wi-fi-direct">7.4.2.1. Wi-Fi Direct</a></td>
+    <td>SHOULD</td>
+    <td>SHOULD</td>
+    <td></td>
+    <td></td>
+    <td>SHOULD</td>
+ </tr>
+ <tr>
+    <td>Bluetooth</td>
+    <td><a href="#7_4_3_bluetooth">7.4.3. Bluetooth</a></td>
+    <td>SHOULD</td>
+    <td>MUST</td>
+    <td>MUST</td>
+    <td>MUST</td>
+    <td>SHOULD</td>
+ </tr>
+ <tr>
+    <td>Bluetooth Low Energy</td>
+    <td><a href="#7_4_3_bluetooth">7.4.3. Bluetooth</a></td>
+    <td>SHOULD</td>
+    <td>MUST</td>
+    <td>SHOULD</td>
+    <td>SHOULD</td>
+    <td>SHOULD</td>
+ </tr>
+ <tr>
+    <td>USB peripheral/host mode</td>
+    <td><a href="#7_7_usb">7.7. USB</a></td>
+    <td>SHOULD</td>
+    <td></td>
+    <td></td>
+    <td>SHOULD</td>
+    <td>SHOULD</td>
+ </tr>
+ <tr>
+    <td>Output</td>
+    <td>Speaker and/or Audio output ports</td>
+    <td><a href="#7_8_2_audio_output">7.8.2. Audio Output</a></td>
+    <td>MUST</td>
+    <td>MUST</td>
+    <td></td>
+    <td>MUST</td>
+    <td>MUST</td>
+ </tr>
+</table>
+
+
+<h1 id="3_software">3. Software</h1>
+
+
+<h2 id="3_1_managed_api_compatibility">3.1. Managed API Compatibility</h2>
+
+
+<p>The managed Dalvik bytecode execution environment is the primary vehicle for
+Android applications. The Android application programming interface (API) is
+the set of Android platform interfaces exposed to applications running in the
+managed runtime environment. Device implementations MUST provide complete
+implementations, including all documented behaviors, of any documented API
+exposed by the Android SDK [<a href="http://developer.android.com/reference/packages.html">Resources, 5</a>] or any API decorated with the &ldquo;@SystemApi&rdquo; marker in the upstream Android
+source code. </p>
+
+<p>Device implementations MUST NOT omit any managed APIs, alter API interfaces or
+signatures, deviate from the documented behavior, or include no-ops, except
+where specifically allowed by this Compatibility Definition.</p>
+
+<p>This Compatibility Definition permits some types of hardware for which Android
+includes APIs to be omitted by device implementations. In such cases, the APIs
+MUST still be present and behave in a reasonable way. See <a href="#7_hardware_compatibility">section 7</a> for specific requirements for this scenario.</p>
+
+<h2 id="3_2_soft_api_compatibility">3.2. Soft API Compatibility</h2>
+
+
+<p>In addition to the managed APIs from <a href="#3_1_managed_api_compatibility">section 3.1</a>, Android also includes a significant runtime-only &ldquo;soft&rdquo; API, in the form of
+such things as intents, permissions, and similar aspects of Android
+applications that cannot be enforced at application compile time.</p>
+
+<h3 id="3_2_1_permissions">3.2.1. Permissions</h3>
+
+
+<p>Device implementers MUST support and enforce all permission constants as
+documented by the Permission reference page [<a href="http://developer.android.com/reference/android/Manifest.permission.html">Resources, 6]</a>. Note that <a href="#9_security_model_compatibility">section 9</a> lists additional requirements related to the Android security model.</p>
+
+<h3 id="3_2_2_build_parameters">3.2.2. Build Parameters</h3>
+
+
+<p>The Android APIs include a number of constants on the android.os.Build class [<a href="http://developer.android.com/reference/android/os/Build.html">Resources, 7</a>] that are intended to describe the current device. To provide consistent,
+meaningful values across device implementations, the table below includes
+additional restrictions on the formats of these values to which device
+implementations MUST conform.</p>
+<table>
+ <tr>
+    <th>Parameter</th>
+    <th>Details</th>
+ </tr>
+ <tr>
+    <td>VERSION.RELEASE</td>
+    <td>The version of the currently-executing Android system, in human-readable
+format. This field MUST have one of the string values defined in [<a href="http://source.android.com/compatibility/ANDROID_VERSION/versions.html">Resources, 8]</a>.</td>
+ </tr>
+ <tr>
+    <td>VERSION.SDK</td>
+    <td>The version of the currently-executing Android system, in a format accessible
+to third-party application code. For Android ANDROID_VERSION, this field MUST have the
+integer value 22.</td>
+ </tr>
+ <tr>
+    <td>VERSION.SDK_INT</td>
+    <td>The version of the currently-executing Android system, in a format accessible
+to third-party application code. For Android ANDROID_VERSION, this field MUST have the
+integer value 22.</td>
+ </tr>
+ <tr>
+    <td>VERSION.INCREMENTAL</td>
+    <td>A value chosen by the device implementer designating the specific build of the
+currently-executing Android system, in human-readable format. This value MUST
+NOT be reused for different builds made available to end users. A typical use
+of this field is to indicate which build number or source-control change
+identifier was used to generate the build. There are no requirements on the
+specific format of this field, except that it MUST NOT be null or the empty
+string ("").</td>
+ </tr>
+ <tr>
+    <td>BOARD</td>
+    <td>A value chosen by the device implementer identifying the specific internal
+hardware used by the device, in human-readable format. A possible use of this
+field is to indicate the specific revision of the board powering the device.
+The value of this field MUST be encodable as 7-bit ASCII and match the regular
+expression &ldquo;^[a-zA-Z0-9_-]+$&rdquo;.</td>
+ </tr>
+ <tr>
+    <td>BRAND</td>
+    <td>A value reflecting the brand name associated with the device as known to the
+end users. MUST be in human-readable format and SHOULD represent the
+manufacturer of the device or the company brand under which the device is
+marketed. The value of this field MUST be encodable as 7-bit ASCII and match
+the regular expression &ldquo;^[a-zA-Z0-9_-]+$&rdquo;.</td>
+ </tr>
+ <tr>
+    <td>SUPPORTED_ABIS</td>
+    <td>The name of the instruction set (CPU type + ABI convention) of native code. See <a href="#3_3_native_api_compatibility">section 3.3. Native API Compatibility</a>.</td>
+ </tr>
+ <tr>
+    <td>SUPPORTED_32_BIT_ABIS</td>
+    <td>The name of the instruction set (CPU type + ABI convention) of native code. See <a href="#3_3_native_api_compatibility">section 3.3. Native API Compatibility</a>.</td>
+ </tr>
+ <tr>
+    <td>SUPPORTED_64_BIT_ABIS</td>
+    <td>The name of the second instruction set (CPU type + ABI convention) of native
+code. See <a href="#3_3_native_api_compatibility">section 3.3. Native API Compatibility</a>.</td>
+ </tr>
+ <tr>
+    <td>CPU_ABI</td>
+    <td>The name of the instruction set (CPU type + ABI convention) of native code. See <a href="#3_3_native_api_compatibility">section 3.3. Native API Compatibility</a>.</td>
+ </tr>
+ <tr>
+    <td>CPU_ABI2</td>
+    <td>The name of the second instruction set (CPU type + ABI convention) of native
+code. See <a href="#3_3_native_api_compatibility">section 3.3. Native API Compatibility</a>.</td>
+ </tr>
+ <tr>
+    <td>DEVICE</td>
+    <td>A value chosen by the device implementer containing the development name or
+code name identifying the configuration of the hardware features and industrial
+design of the device. The value of this field MUST be encodable as 7-bit ASCII
+and match the regular expression &ldquo;^[a-zA-Z0-9_-]+$&rdquo;.</td>
+ </tr>
+ <tr>
+    <td>FINGERPRINT</td>
+    <td>A string that uniquely identifies this build. It SHOULD be reasonably
+human-readable. It MUST follow this template:</p>
+
+<p class="small">$(BRAND)/$(PRODUCT)/$(DEVICE):$(VERSION.RELEASE)/$(ID)/$(VERSION.INCREMENTAL):$(TYPE)/$(TAGS)</p>
+
+<p>For example: acme/myproduct/mydevice:ANDROID_VERSION/LMYXX/3359:userdebug/test-keys</p>
+
+<p>The fingerprint MUST NOT include whitespace characters. If other fields
+included in the template above have whitespace characters, they MUST be
+replaced in the build fingerprint with another character, such as the
+underscore ("_") character. The value of this field MUST be encodable as 7-bit
+ASCII.</td>
+ </tr>
+ <tr>
+    <td>HARDWARE</td>
+    <td>The name of the hardware (from the kernel command line or /proc). It SHOULD be
+reasonably human-readable. The value of this field MUST be encodable as 7-bit
+ASCII and match the regular expression &ldquo;^[a-zA-Z0-9_-]+$&rdquo;. </td>
+ </tr>
+ <tr>
+    <td>HOST</td>
+    <td>A string that uniquely identifies the host the build was built on, in
+human-readable format. There are no requirements on the specific format of this
+field, except that it MUST NOT be null or the empty string ("").</td>
+ </tr>
+ <tr>
+    <td>ID</td>
+    <td>An identifier chosen by the device implementer to refer to a specific release,
+in human-readable format. This field can be the same as
+android.os.Build.VERSION.INCREMENTAL, but SHOULD be a value sufficiently
+meaningful for end users to distinguish between software builds. The value of
+this field MUST be encodable as 7-bit ASCII and match the regular expression &ldquo;^[a-zA-Z0-9._-]+$&rdquo;.</td>
+ </tr>
+ <tr>
+    <td>MANUFACTURER</td>
+    <td>The trade name of the Original Equipment Manufacturer (OEM) of the product.
+There are no requirements on the specific format of this field, except that it
+MUST NOT be null or the empty string ("").</td>
+ </tr>
+ <tr>
+    <td>MODEL</td>
+    <td>A value chosen by the device implementer containing the name of the device as
+known to the end user. This SHOULD be the same name under which the device is
+marketed and sold to end users. There are no requirements on the specific
+format of this field, except that it MUST NOT be null or the empty string ("").</td>
+ </tr>
+ <tr>
+    <td>PRODUCT</td>
+    <td>A value chosen by the device implementer containing the development name or
+code name of the specific product (SKU) that MUST be unique within the same
+brand. MUST be human-readable, but is not necessarily intended for view by end
+users. The value of this field MUST be encodable as 7-bit ASCII and match the
+regular expression &ldquo;^[a-zA-Z0-9_-]+$&rdquo;.</td>
+ </tr>
+ <tr>
+    <td>SERIAL</td>
+    <td>A hardware serial number, which MUST be available. The value of this field MUST
+be encodable as 7-bit ASCII and match the regular expression &ldquo;^([a-zA-Z0-9]{6,20})$&rdquo;.</td>
+ </tr>
+ <tr>
+    <td>TAGS</td>
+    <td>A comma-separated list of tags chosen by the device implementer that further
+distinguishes the build. This field MUST have one of the values corresponding
+to the three typical Android platform signing configurations: release-keys,
+dev-keys, test-keys. </td>
+ </tr>
+ <tr>
+    <td>TIME</td>
+    <td>A value representing the timestamp of when the build occurred.</td>
+ </tr>
+ <tr>
+    <td>TYPE</td>
+    <td>A value chosen by the device implementer specifying the runtime configuration
+of the build. This field MUST have one of the values corresponding to the three
+typical Android runtime configurations: user, userdebug, or eng.</td>
+ </tr>
+ <tr>
+    <td>USER</td>
+    <td>A name or user ID of the user (or automated user) that generated the build.
+There are no requirements on the specific format of this field, except that it
+MUST NOT be null or the empty string ("").</td>
+ </tr>
+</table>
+
+
+<h3 id="3_2_3_intent_compatibility">3.2.3. Intent Compatibility</h3>
+
+
+<p>Device implementations MUST honor Android&rsquo;s loose-coupling intent system, as
+described in the sections below. By&ldquo;honored &rdquo; it is meant that the device
+implementer MUST provide an Android Activity or Service that specifies a
+matching intent filter that binds to and implements correct behavior for each
+specified intent pattern.</p>
+
+<h4 id="3_2_3_1_core_application_intents">3.2.3.1. Core Application Intents</h4>
+
+
+<p>Android intents allow application components to request functionality from
+other Android components. The Android upstream project includes a list of
+applications considered core Android applications, which implements several
+intent patterns to perform common actions. The core Android applications are:</p>
+
+<ul>
+  <li>Desk Clock</li>
+  <li>Browser</li>
+  <li>Calendar</li>
+  <li>Contacts</li>
+  <li>Gallery</li>
+  <li>GlobalSearch</li>
+  <li>Launcher</li>
+  <li>Music</li>
+  <li>Settings</li>
+</ul>
+
+<p>Device implementations SHOULD include the core Android applications as
+appropriate but MUST include a component implementing the same intent patterns
+defined by all the &ldquo;public&rdquo; Activity or Service components of these core
+Android applications. Note that Activity or Service components are considered
+&ldquo;public&rdquo; when the attribute android:exported is absent or has the value true.</p>
+
+<h4 id="3_2_3_2_intent_overrides">3.2.3.2. Intent Overrides</h4>
+
+
+<p>As Android is an extensible platform, device implementations MUST allow each
+intent pattern referenced in <a href="#3_2_3_1_core_application_intents">section 3.2.3.1</a> to be overridden by third-party applications. The upstream Android open source
+implementation allows this by default; device implementers MUST NOT attach
+special privileges to system applications' use of these intent patterns, or
+prevent third-party applications from binding to and assuming control of these
+patterns. This prohibition specifically includes but is not limited to
+disabling the&ldquo;Chooser&rdquo; user interface that allows the user to select between
+multiple applications that all handle the same intent pattern.</p>
+
+<p>However, device implementations MAY provide default activities for specific URI
+patterns (eg. http://play.google.com) if the default activity provides a more
+specific filter for the data URI. For example, an intent filter specifying the
+data URI &ldquo;http://www.android.com&rdquo; is more specific than the browser filter for&ldquo;http://&rdquo;. Device implementations MUST provide a user interface for users to
+modify the default activity for intents.</p>
+
+<h4 id="3_2_3_3_intent_namespaces">3.2.3.3. Intent Namespaces</h4>
+
+
+<p>Device implementations MUST NOT include any Android component that honors any
+new intent or broadcast intent patterns using an ACTION, CATEGORY, or other key
+string in the android.* or com.android.* namespace. Device implementers MUST
+NOT include any Android components that honor any new intent or broadcast
+intent patterns using an ACTION, CATEGORY, or other key string in a package
+space belonging to another organization. Device implementers MUST NOT alter or
+extend any of the intent patterns used by the core apps listed in <a href="#3_2_3_1_core_application_intents">section 3.2.3.1</a>. Device implementations MAY include intent patterns using namespaces clearly
+and obviously associated with their own organization. This prohibition is
+analogous to that specified for Java language classes in <a href="#3_6_api_namespaces">section 3.6</a>.</p>
+
+<h4 id="3_2_3_4_broadcast_intents">3.2.3.4. Broadcast Intents</h4>
+
+
+<p>Third-party applications rely on the platform to broadcast certain intents to
+notify them of changes in the hardware or software environment.
+Android-compatible devices MUST broadcast the public broadcast intents in
+response to appropriate system events. Broadcast intents are described in the
+SDK documentation.</p>
+
+<h4 id="3_2_3_5_default_app_settings">3.2.3.5. Default App Settings</h4>
+
+
+<p>Android includes settings that provide users an easy way to select their
+default applications, for example for Home screen or SMS. Where it makes sense,
+device implementations MUST provide a similar settings menu and be compatible
+with the intent filter pattern and API methods described in the SDK
+documentation as below.</p>
+
+<p>Device implementations:</p>
+
+<ul>
+  <li>MUST honor the android.settings.HOME_SETTINGS intent to show a default app
+settings menu for Home Screen, if the device implementation reports
+android.software.home_screen [<a href="http://developer.android.com/reference/android/provider/Settings.html">Resources, 10]</a></li>
+  <li>MUST provide a settings menu that will call the
+android.provider.Telephony.ACTION_CHANGE_DEFAULT intent to show a dialog to
+change the default SMS application, if the device implementation reports
+android.hardware.telephony [<a href="http://developer.android.com/reference/android/provider/Telephony.Sms.Intents.html">Resources, 9</a>]</li>
+  <li>MUST honor the android.settings.NFC_PAYMENT_SETTINGS intent to show a default
+app settings menu for Tap and Pay, if the device implementation reports
+android.hardware.nfc.hce [<a href="http://developer.android.com/reference/android/provider/Settings.html">Resources, 10]</a></li>
+</ul>
+
+<h2 id="3_3_native_api_compatibility">3.3. Native API Compatibility</h2>
+
+
+<h3 id="3_3_1_application_binary_interfaces">3.3.1. Application Binary Interfaces</h3>
+
+
+<p>Managed Dalvik bytecode can call into native code provided in the application
+.apk file as an ELF .so file compiled for the appropriate device hardware
+architecture. As native code is highly dependent on the underlying processor
+technology, Android defines a number of Application Binary Interfaces (ABIs) in
+the Android NDK. Device implementations MUST be compatible with one or more
+defined ABIs, and MUST implement compatibility with the Android NDK, as below.</p>
+
+<p>If a device implementation includes support for an Android ABI, it:</p>
+
+<ul>
+  <li>MUST include support for code running in the managed environment to call into
+native code, using the standard Java Native Interface (JNI) semantics</li>
+  <li>MUST be source-compatible (i.e. header compatible) and binary-compatible (for
+the ABI) with each required library in the list below</li>
+  <li>MUST support the equivalent 32-bit ABI if any 64-bit ABI is supported</li>
+  <li>MUST accurately report the native Application Binary Interface (ABI) supported
+by the device, via the android.os.Build.SUPPORTED_ABIS,
+android.os.Build.SUPPORTED_32_BIT_ABIS, and
+android.os.Build.SUPPORTED_64_BIT_ABIS parameters, each a comma separated list
+of ABIs ordered from the most to the least preferred one</li>
+  <li>MUST report, via the above parameters, only those ABIs documented in the latest
+version of the Android NDK, &ldquo;NDK Programmer&rsquo;s Guide | ABI Management&rdquo; in docs/
+directory</li>
+  <li>SHOULD be built using the source code and header files available in the
+upstream Android Open Source Project</li>
+</ul>
+
+<p>The following native code APIs MUST be available to apps that include native
+code:</p>
+
+<ul>
+  <li>libc (C library)</li>
+  <li>libm (math library)</li>
+  <li>Minimal support for C++</li>
+  <li>JNI interface</li>
+  <li>liblog (Android logging)</li>
+  <li>libz (Zlib compression)</li>
+  <li>libdl (dynamic linker)</li>
+  <li>libGLESv1_CM.so (OpenGL ES 1.x)</li>
+  <li>libGLESv2.so (OpenGL ES 2.0)</li>
+  <li>libGLESv3.so (OpenGL ES 3.x)</li>
+  <li>libEGL.so (native OpenGL surface management)</li>
+  <li>libjnigraphics.so</li>
+  <li>libOpenSLES.so (OpenSL ES 1.0.1 audio support)</li>
+  <li>libOpenMAXAL.so (OpenMAX AL 1.0.1 support)</li>
+  <li>libandroid.so (native Android activity support)</li>
+  <li>libmediandk.so (native media APIs support)</li>
+  <li>Support for OpenGL, as described below</li>
+</ul>
+
+<p>Note that future releases of the Android NDK may introduce support for
+additional ABIs. If a device implementation is not compatible with an existing
+predefined ABI, it MUST NOT report support for any ABIs at all.</p>
+
+<p>Note that device implementations MUST include libGLESv3.so and it MUST symlink
+(symbolic link) to libGLESv2.so. in turn, MUST export all the OpenGL ES 3.1 and
+Android Extension Pack [<a href="http://developer.android.com/guide/topics/graphics/opengl.html#aep">Resources, 11</a>] function symbols as defined in the NDK release android-21. Although all the
+symbols must be present, only the corresponding functions for OpenGL ES
+versions and extensions actually supported by the device must be fully
+implemented.</p>
+
+<p>Native code compatibility is challenging. For this reason, device implementers
+are <strong>very strongly encouraged</strong> to use the implementations of the libraries listed above from the upstream
+Android Open Source Project. </p>
+
+<h3 id="3_3_2_32-bit_arm_native_code_compatibility">
+3.3.2. 32-bit ARM Native Code Compatibility
+</h3>
+
+<p>The ARMv8 architecture deprecates several CPU operations, including some
+operations used in existing native code.  On 64-bit ARM devices, the following
+deprecated operations MUST remain available to 32-bit native ARM code, either
+through native CPU support or through software emulation:</p>
+
+<ul>
+<li>SWP and SWPB instructions</li>
+<li>SETEND instruction</li>
+<li>CP15ISB, CP15DSB, and CP15DMB barrier operations</li>
+</ul>
+
+<p>Legacy versions of the Android NDK used /proc/cpuinfo to discover CPU features
+from 32-bit ARM native code. For compatibility with applications built using this
+NDK, devices MUST include the following lines in /proc/cpuinfo when it is read
+by 32-bit ARM applications:</p>
+
+<ul>
+<li>&quot;Features: &quot;, followed by a list of any optional ARMv7 CPU features
+supported by the device</li>
+<li>&quot;CPU architecture: &quot;, followed by an integer describing the device's
+highest supported ARM architecture (e.g., &quot;8&quot; for ARMv8 devices)</li>
+</ul>
+
+<p>These requirements only apply when /proc/cpuinfo is read by 32-bit ARM
+applications. Devices SHOULD not alter /proc/cpuinfo when read by 64-bit ARM or
+non-ARM applications.</p>
+
+<h2 id="3_4_web_compatibility">3.4. Web Compatibility</h2>
+
+
+<h3 id="3_4_1_webview_compatibility">3.4.1. WebView Compatibility</h3>
+
+<div class="note">
+<p>Android Watch devices MAY, but all other device implementations MUST provide
+a complete implementation of the android.webkit.Webview API.</p>
+</div>
+
+
+<p>The platform feature android.software.webview MUST be reported on any device
+that provides a complete implementation of the android.webkit.WebView API, and
+MUST NOT be reported on devices without a complete implementation of the API.
+The Android Open Source implementation uses code from the Chromium Project to
+implement the android.webkit.WebView [<a href="http://developer.android.com/reference/android/webkit/WebView.html">Resources, 12</a>]. Because it is not feasible to develop a comprehensive test suite for a web
+rendering system, device implementers MUST use the specific upstream build of
+Chromium in the WebView implementation. Specifically:</p>
+
+<ul>
+  <li>Device android.webkit.WebView implementations MUST be based on the Chromium
+build from the upstream Android Open Source Project for Android ANDROID_VERSION. This build
+includes a specific set of functionality and security fixes for the WebView [<a href="http://www.chromium.org/">Resources, 13</a>].</li>
+  <li>The user agent string reported by the WebView MUST be in this format:
+<p>Mozilla/5.0 (Linux; Android $(VERSION); $(MODEL) Build/$(BUILD)$(WEBVIEW))
+AppleWebKit/537.36 (KHTML, like Gecko) Version/4.0 $(CHROMIUM_VER) Mobile
+Safari/537.36</p>
+  <ul>
+    <li>The value of the $(VERSION) string MUST be the same as the value for
+android.os.Build.VERSION.RELEASE.</li>
+    <li>The $(WEBVIEW) string MAY be omitted, but if included MUST be "; wv" to
+        note that this is a webview</li>
+    <li>The value of the $(MODEL) string MUST be the same as the value for
+android.os.Build.MODEL.</li>
+    <li>The value of the $(BUILD) string MUST be the same as the value for
+android.os.Build.ID.</li>
+    <li>The value of the $(CHROMIUM_VER) string MUST be the version of Chromium in the
+upstream Android Open Source Project.</li>
+    <li>Device implementations MAY omit Mobile in the user agent string.</li>
+  </ul></li></ul>
+
+<p>The WebView component SHOULD include support for as many HTML5 features as
+possible and if it supports the feature SHOULD conform to the HTML5
+specification [<a href="http://html.spec.whatwg.org/multipage/">Resources, 14</a>].</p>
+
+<h3 id="3_4_2_browser_compatibility">3.4.2. Browser Compatibility</h3>
+
+<div class="note">
+<p>Android Television, Watch, and Android Automotive implementations MAY omit a
+browser application, but MUST support the public intent patterns as described in
+<a href="#3_2_3_1_core_application_intents">section 3.2.3.1</a>. All other types
+of device implementations MUST include a standalone Browser application for
+general user web browsing.</p>
+</div>
+
+<p>The standalone Browser MAY be based on a browser technology other than WebKit.
+However, even if an alternate Browser application is used, the
+android.webkit.WebView component provided to third-party applications MUST be
+based on WebKit, as described in <a href="#3_4_1_webview_compatibility">section 3.4.1</a>.</p>
+
+<p>Implementations MAY ship a custom user agent string in the standalone Browser
+application.</p>
+
+<p>The standalone Browser application (whether based on the upstream WebKit
+Browser application or a third-party replacement) SHOULD include support for as
+much of HTML5 [<a href="http://html.spec.whatwg.org/multipage/">Resources, 14</a>] as possible. Minimally, device implementations MUST support each of these
+APIs associated with HTML5:</p>
+
+<ul>
+  <li>application cache/offline operation [<a href="http://www.w3.org/html/wg/drafts/html/master/browsers.html#offline">Resources, 15</a>]</li>
+  <li>the &#60;video&#62; tag [<a href="http://www.w3.org/html/wg/drafts/html/master/semantics.html#video">Resources, 16</a>]</li>
+  <li>geolocation [<a href="http://www.w3.org/TR/geolocation-API/">Resources, 17</a>]</li>
+</ul>
+
+<p>Additionally, device implementations MUST support the HTML5/W3C webstorage API
+[<a href="http://www.w3.org/TR/webstorage/">Resources, 18</a>], and SHOULD support the HTML5/W3C IndexedDB API [<a href="http://www.w3.org/TR/IndexedDB/">Resources, 19</a>]. Note that as the web development standards bodies are transitioning to favor
+IndexedDB over webstorage, IndexedDB is expected to become a required component
+in a future version of Android.</p>
+
+<h2 id="3_5_api_behavioral_compatibility">3.5. API Behavioral Compatibility</h2>
+
+
+<p>The behaviors of each of the API types (managed, soft, native, and web) must be
+consistent with the preferred implementation of the upstream Android Open
+Source Project [<a href="http://source.android.com/">Resources, 2</a>]. Some specific areas of compatibility are:</p>
+
+<ul>
+  <li>Devices MUST NOT change the behavior or semantics of a standard intent.</li>
+  <li>Devices MUST NOT alter the lifecycle or lifecycle semantics of a particular
+type of system component (such as Service, Activity, ContentProvider, etc.).</li>
+  <li>Devices MUST NOT change the semantics of a standard permission.</li>
+</ul>
+
+<p>The above list is not comprehensive. The Compatibility Test Suite (CTS) tests
+significant portions of the platform for behavioral compatibility, but not all.
+It is the responsibility of the implementer to ensure behavioral compatibility
+with the Android Open Source Project. For this reason, device implementers
+SHOULD use the source code available via the Android Open Source Project where
+possible, rather than re-implement significant parts of the system.</p>
+
+<h2 id="3_6_api_namespaces">3.6. API Namespaces</h2>
+
+
+<p>Android follows the package and class namespace conventions defined by the Java
+programming language. To ensure compatibility with third-party applications,
+device implementers MUST NOT make any prohibited modifications (see below) to
+these package namespaces:</p>
+
+<ul>
+  <li>java.*</li>
+  <li>javax.*</li>
+  <li>sun.*</li>
+  <li>android.*</li>
+  <li>com.android.*</li>
+</ul>
+
+<p><strong>Prohibited modifications include</strong>:</p>
+
+<ul>
+  <li>Device implementations MUST NOT modify the publicly exposed APIs on the Android
+platform by changing any method or class signatures, or by removing classes or
+class fields.</li>
+  <li>Device implementers MAY modify the underlying implementation of the APIs, but
+such modifications MUST NOT impact the stated behavior and Java-language
+signature of any publicly exposed APIs.</li>
+  <li>Device implementers MUST NOT add any publicly exposed elements (such as classes
+or interfaces, or fields or methods to existing classes or interfaces) to the
+APIs above.</li>
+</ul>
+
+<p>A &ldquo;publicly exposed element&rdquo; is any construct which is not decorated with the&ldquo;@hide&rdquo; marker as used in the upstream Android source code. In other words,
+device implementers MUST NOT expose new APIs or alter existing APIs in the
+namespaces noted above. Device implementers MAY make internal-only
+modifications, but those modifications MUST NOT be advertised or otherwise
+exposed to developers.</p>
+
+<p>Device implementers MAY add custom APIs, but any such APIs MUST NOT be in a
+namespace owned by or referring to another organization. For instance, device
+implementers MUST NOT add APIs to the com.google.* or similar namespace: only
+Google may do so. Similarly, Google MUST NOT add APIs to other companies'
+namespaces. Additionally, if a device implementation includes custom APIs
+outside the standard Android namespace, those APIs MUST be packaged in an
+Android shared library so that only apps that explicitly use them (via the
+lt;uses-librarygt; mechanism) are affected by the increased memory usage of such
+APIs.</p>
+
+<p>If a device implementer proposes to improve one of the package namespaces above
+(such as by adding useful new functionality to an existing API, or adding a new
+API), the implementer SHOULD visit <a href="http://source.android.com/">source.android.com</a> and begin the process for contributing changes and code, according to the
+information on that site.</p>
+
+<p>Note that the restrictions above correspond to standard conventions for naming
+APIs in the Java programming language; this section simply aims to reinforce
+those conventions and make them binding through inclusion in this Compatibility
+Definition.</p>
+
+<h2 id="3_7_runtime_compatibility">3.7. Runtime Compatibility</h2>
+
+
+<p>Device implementations MUST support the full Dalvik Executable (DEX) format and
+Dalvik bytecode specification and semantics [<a href="https://android.googlesource.com/platform/dalvik/+/lollipop-release/docs/">Resources, 20</a>]. Device implementers SHOULD use ART, the reference upstream implementation of
+the Dalvik Executable Format, and the reference implementation&rsquo;s package
+management system.</p>
+
+<p>Device implementations MUST configure Dalvik runtimes to allocate memory in
+accordance with the upstream Android platform, and as specified by the
+following table. (See <a href="#7_1_1_screen_configuration">section 7.1.1</a> for screen size and screen density definitions.)</p>
+
+<p>Note that memory values specified below are considered minimum values and
+device implementations MAY allocate more memory per application.</p>
+
+<table>
+ <tr>
+    <th>Screen Layout</th>
+    <th>Screen Density</th>
+    <th>Minimum Application Memory</th>
+ </tr>
+ <tr>
+    <td rowspan="10">small/normal</td>
+    <td>120 dpi (ldpi)</td>
+    <td rowspan="2">32MB</td>
+ </tr>
+ <tr>
+    <td>160 dpi (mdpi)</td>
+ </tr>
+ <tr>
+    <td>213 dpi (tvdpi)</td>
+    <td rowspan="3">48MB</td>
+ </tr>
+ <tr>
+    <td>240 dpi (hdpi)</td>
+ </tr>
+ <tr>
+    <td>280 dpi (280dpi)</td>
+ </tr>
+ <tr>
+    <td>320 dpi (xhdpi)</td>
+    <td>80MB</td>
+ </tr>
+ <tr>
+    <td>400 dpi (400dpi)</td>
+    <td>96MB</td>
+ </tr>
+ <tr>
+    <td>480 dpi (xxhdpi)</td>
+    <td>128MB</td>
+ </tr>
+ <tr>
+    <td>560 dpi (560dpi)</td>
+    <td>192MB</td>
+ </tr>
+ <tr>
+    <td>640 dpi (xxxhdpi)</td>
+    <td>256MB</td>
+ </tr>
+ <tr>
+    <td rowspan="10">large</td>
+    <td>120 dpi (ldpi)</td>
+    <td>32MB</td>
+ </tr>
+ <tr>
+    <td>160 dpi (mdpi)</td>
+    <td>48MB</td>
+ </tr>
+ <tr>
+    <td>213 dpi (tvdpi)</td>
+    <td rowspan="2">80MB</td>
+ </tr>
+ <tr>
+    <td>240 dpi (hdpi)</td>
+ </tr>
+ <tr>
+    <td>280 dpi (280dpi)</td>
+    <td>96MB</td>
+ </tr>
+ <tr>
+    <td>320 dpi (xhdpi)</td>
+    <td>128MB</td>
+ </tr>
+ <tr>
+    <td>400 dpi (400dpi)</td>
+    <td>192MB</td>
+ </tr>
+ <tr>
+    <td>480 dpi (xxhdpi)</td>
+    <td>256MB</td>
+ </tr>
+ <tr>
+    <td>560 dpi (560dpi)</td>
+    <td>384MB</td>
+ </tr>
+ <tr>
+    <td>640 dpi (xxxhdpi)</td>
+    <td>512MB</td>
+ </tr>
+ <tr>
+    <td rowspan="10">xlarge</td>
+    <td>120 dpi (ldpi)</td>
+    <td>48MB</td>
+ </tr>
+ <tr>
+    <td>160 dpi (mdpi)</td>
+    <td>80MB</td>
+ </tr>
+ <tr>
+    <td>213 dpi (tvdpi)</td>
+    <td rowspan="2">96MB</td>
+ </tr>
+ <tr>
+    <td>240 dpi (hdpi)</td>
+ </tr>
+ <tr>
+    <td>280 dpi (280dpi)</td>
+    <td>144MB</td>
+ </tr>
+ <tr>
+    <td>320 dpi (xhdpi)</td>
+    <td>192MB</td>
+ </tr>
+ <tr>
+    <td>400 dpi (400dpi)</td>
+    <td>288MB</td>
+ </tr>
+ <tr>
+    <td>480 dpi (xxhdpi)</td>
+    <td>384MB</td>
+ </tr>
+ <tr>
+    <td>560 dpi (560dpi)</td>
+    <td>576MB</td>
+ </tr>
+ <tr>
+    <td>640 dpi (xxxhdpi)</td>
+    <td>768MB</td>
+ </tr>
+</table>
+
+
+<h2 id="3_8_user_interface_compatibility">3.8. User Interface Compatibility</h2>
+
+
+<h3 id="3_8_1_launcher_home_screen">3.8.1. Launcher (Home Screen)</h3>
+
+
+<p>Android includes a launcher application (home screen) and support for
+third-party applications to replace the device launcher (home screen). Device
+implementations that allow third-party applications to replace the device home
+screen MUST declare the platform feature android.software.home_screen.</p>
+
+<h3 id="3_8_2_widgets">3.8.2. Widgets</h3>
+
+<div class="note">
+<p>Widgets are optional for all Android device implementations, but SHOULD be
+supported on Android Handheld devices.</p>
+</div>
+
+
+<p>Android defines a component type and corresponding API and lifecycle that
+allows applications to expose an &ldquo;AppWidget&rdquo; to the end user [<a href="http://developer.android.com/guide/practices/ui_guidelines/widget_design.html">Resources, 21</a>] a feature that is strongly RECOMMENDED to be supported on Handheld Device
+implementations. Device implementations that support embedding widgets on the
+home screen MUST meet the following requirements and declare support for
+platform feature android.software.app_widgets.</p>
+
+<ul>
+  <li>Device launchers MUST include built-in support for AppWidgets, and expose user
+interface affordances to add, configure, view, and remove AppWidgets directly
+within the Launcher.</li>
+  <li>Device implementations MUST be capable of rendering widgets that are 4 x 4 in
+the standard grid size. See the App Widget Design Guidelines in the Android SDK
+documentation [<a href="http://developer.android.com/guide/practices/ui_guidelines/widget_design.html">Resources, 21</a>] for details.</li>
+  <li>Device implementations that include support for lock screen MAY support
+application widgets on the lock screen.</li>
+</ul>
+
+<h3 id="3_8_3_notifications">3.8.3. Notifications</h3>
+
+
+<p>Android includes APIs that allow developers to notify users of notable events [<a href="http://developer.android.com/guide/topics/ui/notifiers/notifications.html">Resources, 22</a>], using hardware and software features of the device.</p>
+
+<p>Some APIs allow applications to perform notifications or attract attention
+using hardware&#8212;specifically sound, vibration, and light. Device implementations
+MUST support notifications that use hardware features, as described in the SDK
+documentation, and to the extent possible with the device implementation
+hardware. For instance, if a device implementation includes a vibrator, it MUST
+correctly implement the vibration APIs. If a device implementation lacks
+hardware, the corresponding APIs MUST be implemented as no-ops. This behavior
+is further detailed in <a href="#7_hardware_compatibility">section 7</a>.</p>
+
+<p>Additionally, the implementation MUST correctly render all resources (icons, animation files
+etc.) provided for in the APIs
+[<a href="https://developer.android.com/guide/topics/resources/available-resources.html">Resources, 23</a>],
+or in the Status/System Bar icon style guide
+[<a href="http://developer.android.com/design/style/iconography.html">Resources, 24</a>],
+which in the case of an Android Television device includes the possibility to not display the
+notifications. Device implementers MAY provide an alternative user experience for
+notifications than that provided by the reference Android Open Source
+implementation; however, such alternative notification systems MUST support
+existing notification resources, as above. </p>
+
+<p>Android includes support for various notifications, such as:</p>
+
+<ul>
+  <li><strong>Rich notifications</strong>. Interactive Views for ongoing notifications.</li>
+  <li><strong>Heads-up notifications</strong>. Interactive Views users can act on or dismiss without leaving the current app.</li>
+  <li><strong>Lockscreen notifications</strong>. Notifications shown over a lock screen with granular control on visibility.</li>
+</ul>
+
+<p>Android device implementations, when such notifications are made visible, MUST properly execute
+Rich and Heads-up notifications and include the title/name, icon, text as documented in the Android
+APIs <a href="https://developer.android.com/design/patterns/notifications.html">[Resources, 25]</a>.
+</p>
+
+<p>Android includes Notification Listener Service APIs that allow apps (once
+explicitly enabled by the user) to receive a copy of all notifications as they
+are posted or updated. Device implementations MUST correctly and promptly send
+notifications in their entirety to all such installed and user-enabled listener
+services, including any and all metadata attached to the Notification object.</p>
+
+<h3 id="3_8_4_search">3.8.4. Search</h3>
+
+
+<p>Android includes APIs [<a href="http://developer.android.com/reference/android/app/SearchManager.html">Resources, 26</a>] that allow developers to incorporate search into their applications, and
+expose their application&rsquo;s data into the global system search. Generally
+speaking, this functionality consists of a single, system-wide user interface
+that allows users to enter queries, displays suggestions as users type, and
+displays results. The Android APIs allow developers to reuse this interface to
+provide search within their own apps, and allow developers to supply results to
+the common global search user interface.</p>
+
+<p>Android device implementations SHOULD include global search, a single, shared,
+system-wide search user interface capable of real-time suggestions in response
+to user input. Device implementations SHOULD implement the APIs that allow
+developers to reuse this user interface to provide search within their own
+applications. Device implementations that implement the global search interface
+MUST implement the APIs that allow third-party applications to add suggestions
+to the search box when it is run in global search mode. If no third-party
+applications are installed that make use of this functionality, the default
+behavior SHOULD be to display web search engine results and suggestions.</p>
+
+<h3 id="3_8_5_toasts">3.8.5. Toasts</h3>
+
+
+<p>Applications can use the &ldquo;Toast&rdquo; API to display short non-modal strings to the
+end user, that disappear after a brief period of time [<a href="http://developer.android.com/reference/android/widget/Toast.html">Resources, 27</a>]. Device implementations MUST display Toasts from applications to end users in
+some high-visibility manner.</p>
+
+<h3 id="3_8_6_themes">3.8.6. Themes</h3>
+
+
+<p>Android provides &ldquo;themes&rdquo; as a mechanism for applications to apply styles
+across an entire Activity or application.</p>
+
+<p>Android includes a &ldquo;Holo&rdquo; theme family as a set of defined styles for
+application developers to use if they want to match the Holo theme look and
+feel as defined by the Android SDK [<a href="http://developer.android.com/guide/topics/ui/themes.html">Resources, 28</a>]. Device implementations MUST NOT alter any of the Holo theme attributes
+exposed to applications [<a href="http://developer.android.com/reference/android/R.style.html">Resources, 29</a>].</p>
+
+<p>Android includes a &ldquo;Material&rdquo; theme family as a set of defined styles for
+application developers to use if they want to match the design theme&rsquo;s look and
+feel across the wide variety of different Android device types. Device
+implementations MUST support the &ldquo;Material&rdquo; theme family and MUST NOT alter any
+of the Material theme attributes or their assets exposed to applications [<a href="http://developer.android.com/reference/android/R.style.html#Theme_Material">Resources, 30</a>].</p>
+
+<p>Android also includes a &ldquo;Device Default&rdquo; theme family as a set of defined
+styles for application developers to use if they want to match the look and
+feel of the device theme as defined by the device implementer. Device
+implementations MAY modify the Device Default theme attributes exposed to
+applications [<a href="http://developer.android.com/reference/android/R.style.html">Resources, 29</a>].</p>
+
+<p>Android supports a new variant theme with translucent system bars, which allows
+application developers to fill the area behind the status and navigation bar
+with their app content. To enable a consistent developer experience in this
+configuration, it is important the status bar icon style is maintained across
+different device implementations. Therefore, Android device implementations
+MUST use white for system status icons (such as signal strength and battery
+level) and notifications issued by the system, unless the icon is indicating a
+problematic status [<a href="http://developer.android.com/reference/android/R.style.html">Resources, 29</a>].</p>
+
+<h3 id="3_8_7_live_wallpapers">3.8.7. Live Wallpapers</h3>
+
+
+<p>Android defines a component type and corresponding API and lifecycle that
+allows applications to expose one or more &ldquo;Live Wallpapers&rdquo; to the end user [<a href="http://developer.android.com/reference/android/service/wallpaper/WallpaperService.html">Resources, 31</a>]. Live wallpapers are animations, patterns, or similar images with limited
+input capabilities that display as a wallpaper, behind other applications.</p>
+
+<p>Hardware is considered capable of reliably running live wallpapers if it can
+run all live wallpapers, with no limitations on functionality, at a reasonable
+frame rate with no adverse effects on other applications. If limitations in the
+hardware cause wallpapers and/or applications to crash, malfunction, consume
+excessive CPU or battery power, or run at unacceptably low frame rates, the
+hardware is considered incapable of running live wallpaper. As an example, some
+live wallpapers may use an OpenGL 2.0 or 3.x context to render their content.
+Live wallpaper will not run reliably on hardware that does not support multiple
+OpenGL contexts because the live wallpaper use of an OpenGL context may
+conflict with other applications that also use an OpenGL context.</p>
+
+<p>Device implementations capable of running live wallpapers reliably as described
+above SHOULD implement live wallpapers, and when implemented MUST report the
+platform feature flag android.software.live_wallpaper.</p>
+
+<h3 id="3_8_8_activity_switching">3.8.8. Activity Switching</h3>
+
+<div class="note">
+<p>As the Recent function navigation key is OPTIONAL, the requirements to
+implement the overview screen is OPTIONAL for Android Television devices and
+Android Watch devices.</p>
+</div>
+
+
+<p>The upstream Android source code includes the overview screen [<a href="http://developer.android.com/guide/components/recents.html">Resources, 32</a>], a system-level user interface for task switching and displaying recently
+accessed activities and tasks using a thumbnail image of the application&rsquo;s
+graphical state at the moment the user last left the application. Device
+implementations including the recents function navigation key as detailed in <a href="#7_2_3_navigation_keys">section 7.2.3</a>, MAY alter the interface but MUST meet the following requirements:</p>
+
+<ul>
+  <li>MUST display affiliated recents as a group that moves together.</li>
+  <li>MUST support at least up to 20 displayed activities.</li>
+  <li>MUST at least display the title of 4 activities at a time.</li>
+  <li>SHOULD display highlight color, icon, screen title in recents.</li>
+  <li>MUST implement the screen pinning behavior [<a href="http://developer.android.com/about/versions/android-5.0.html#ScreenPinning">Resources, 33</a>] and provide the user with a settings menu to toggle the feature.</li>
+  <li>SHOULD display a closing affordance ("x") but MAY delay this until user
+interacts with screens.</li>
+</ul>
+
+<p>Device implementations are STRONGLY ENCOURAGED to use the upstream Android user
+interface (or a similar thumbnail-based interface) for the overview screen.</p>
+
+<h3 id="3_8_9_input_management">3.8.9. Input Management</h3>
+
+
+<p>Android includes support for Input Management and support for third-party input
+method editors [<a href="http://developer.android.com/guide/topics/text/creating-input-method.html">Resources, 34</a>]. Device implementations that allow users to use third-party input methods on
+the device MUST declare the platform feature android.software.input_methods and
+support IME APIs as defined in the Android SDK documentation.</p>
+
+<p>Device implementations that declare the android.software.input_methods feature
+MUST provide a user-accessible mechanism to add and configure third-party input
+methods. Device implementations MUST display the settings interface in response
+to the android.settings.INPUT_METHOD_SETTINGS intent.</p>
+
+<h3 id="3_8_10_lock_screen_media_control">3.8.10. Lock Screen Media Control</h3>
+
+
+<p>The Remote Control Client API is deprecated from Android 5.0 in favor of the
+Media Notification Template that allows media applications to integrate with
+playback controls that are displayed on the lock screen [<a href="http://developer.android.com/reference/android/app/Notification.MediaStyle.html">Resources, 35</a>].
+Device implementations that support a lock screen, unless an Android Automotive or Watch
+implementation, MUST display the Lockscreen Notifications including the Media Notification
+Template.</p>
+
+<h3 id="3_8_11_dreams">3.8.11. Dreams</h3>
+
+
+<p>Android includes support for interactive screensavers called Dreams [<a href="http://developer.android.com/reference/android/service/dreams/DreamService.html">Resources, 36</a>]. Dreams allows users to interact with applications when a device connected to
+a power source is idle or docked in a desk dock. Android Watch devices MAY
+implement Dreams, but other types of device implementations SHOULD include
+support for Dreams and provide a settings option for users to configure Dreams
+in response to the android.settings.DREAM_SETTINGS intent.</p>
+
+<h3 id="3_8_12_location">3.8.12. Location</h3>
+
+
+<p>When a device has a hardware sensor (e.g. GPS) that is capable of providing the
+location coordinates, location modes MUST be displayed in the Location menu
+within Settings [<a href="http://developer.android.com/reference/android/provider/Settings.Secure.html#LOCATION_MODE">Resources, 37</a>].</p>
+
+<h3 id="3_8_13_unicode_and_font">3.8.13. Unicode and Font</h3>
+
+
+<p>Android includes support for color emoji characters. When Android device
+implementations include an IME, devices SHOULD provide an input method to the
+user for the Emoji characters defined in Unicode 6.1 [<a href="http://www.unicode.org/versions/Unicode6.1.0/">Resources, 38</a>]. All devices MUST be capable of rendering these emoji characters in color glyph.</p>
+
+<p>Android includes support for Roboto 2 font with different
+weights&mdash;sans-serif-thin, sans-serif-light, sans-serif-medium, sans-serif-black,
+sans-serif-condensed, sans-serif-condensed-light&mdash;which MUST all be included for
+the languages available on the device and full Unicode 7.0 coverage of Latin,
+Greek, and Cyrillic, including the Latin Extended A, B, C, and D ranges, and
+all glyphs in the currency symbols block of Unicode 7.0.</p>
+
+<h2 id="3_9_device_administration">3.9. Device Administration</h2>
+
+
+<p>Android includes features that allow security-aware applications to perform
+device administration functions at the system level, such as enforcing password
+policies or performing remote wipe, through the Android Device Administration
+API [<a href="http://developer.android.com/guide/topics/admin/device-admin.html">Resources, 39</a>].
+Device implementations MUST provide an implementation of the DevicePolicyManager class
+[<a href="http://developer.android.com/reference/android/app/admin/DevicePolicyManager.html">Resources, 40</a>].
+Device implementations that include support for PIN (numeric) or PASSWORD
+(alphanumeric) based lock screens MUST support the full range of device
+administration policies defined in the Android SDK documentation
+[<a href="http://developer.android.com/guide/topics/admin/device-admin.html">Resources, 39</a>]
+and report the platform feature android.software.device_admin.</p>
+
+<p>Device implementations MAY have a preinstalled application performing device
+administration functions but this application MUST NOT be set out-of-the box as
+the default Device Owner app [<a href="http://developer.android.com/reference/android/app/admin/DevicePolicyManager.html#isDeviceOwnerApp(java.lang.String)">Resources, 41</a>].</p>
+
+<h2 id="3_10_accessibility">3.10. Accessibility</h2>
+
+
+<p>Android provides an accessibility layer that helps users with disabilities to
+navigate their devices more easily. In addition, Android provides platform APIs
+that enable accessibility service implementations to receive callbacks for user
+and system events and generate alternate feedback mechanisms, such as
+text-to-speech, haptic feedback, and trackball/d-pad navigation [<a href="http://developer.android.com/reference/android/accessibilityservice/AccessibilityService.html">Resources, 42</a>].</p>
+
+<p>Device implementations include the following requirements:</p>
+
+<ul>
+<li>Android Automotive implementations SHOULD provide an implementation of the
+Android accessibility framework consistent with the default Android
+implementation.</li>
+<li>Device implementations (Android Automotive excluded) MUST provide an
+implementation of the Android accessibility framework consistent with the
+default Android implementation.</li>
+<li>Device implementations (Android Automotive excluded) MUST support
+third-party accessibility service implementations through the
+android.accessibilityservice APIs
+[<a href="http://developer.android.com/reference/android/view/accessibility/package-summary.html">Resources, 43</a>]</li>
+<li>Device implementations (Android Automotive excluded) MUST generate
+AccessibilityEvents and deliver these events to all registered
+AccessibilityService implementations in a manner consistent with the default
+Android implementation</li>
+<li> Device implementations (Android Automotive and Android Watch devices with
+no audio output excluded), MUST provide a user-accessible mechanism to enable
+and disable accessibility services, and MUST display this interface in response
+to the android.provider.Settings.ACTION_ACCESSIBILITY_SETTINGS intent.</li>
+</ul>
+
+<p>Additionally, device implementations SHOULD provide an implementation of an
+accessibility service on the device, and SHOULD provide a mechanism for users
+to enable the accessibility service during device setup. An open source
+implementation of an accessibility service is available from the Eyes Free
+project [<a href="http://code.google.com/p/eyes-free/">Resources, 44</a>].</p>
+
+<h2 id="3_11_text-to-speech">3.11. Text-to-Speech</h2>
+
+
+<p>Android includes APIs that allow applications to make use of text-to-speech
+(TTS) services and allows service providers to provide implementations of TTS
+services [<a href="http://developer.android.com/reference/android/speech/tts/package-summary.html">Resources, 45</a>]. Device implementations reporting the feature android.hardware.audio.output
+MUST meet these requirements related to the Android TTS framework. </p>
+
+<p>Android Automotive implementations:</p>
+<ul>
+<li>MUST support the Android TTS framework APIs.</li>
+<li>MAY support installation of third-party TTS engines. If supported, partners
+MUST provide a user-accessible interface that allows the user to select a TTS
+engine for use at system level.</li>
+</ul>
+
+<p>All other device implementations:</p>
+
+<ul>
+  <li> MUST support the Android TTS framework APIs and SHOULD include a TTS engine
+supporting the languages available on the device. Note that the upstream
+Android open source software includes a full-featured TTS engine
+implementation.
+  <li> MUST support installation of third-party TTS engines
+  <li> MUST provide a user-accessible interface that allows users to select a TTS
+engine for use at the system level
+</ul>
+
+<h2 id="3_12_tv_input_framework">3.12. TV Input Framework</h2>
+
+
+<p>The Android Television Input Framework (TIF) simplifies the delivery of live
+content to Android Television devices. TIF provides a standard API to create
+input modules that control Android Television devices. Android Television
+device implementations MUST support Television Input Framework [<a href="http://source.android.com/devices/tv/index.html">Resources, 46</a>].</p>
+
+<p>Device implementations that support TIF MUST declare the platform feature
+android.software.live_tv.</p>
+
+<h1 id="4_application_packaging_compatibility">4. Application Packaging Compatibility</h1>
+
+
+<p>Device implementations MUST install and run Android &ldquo;.apk&rdquo; files as generated
+by the &ldquo;aapt&rdquo; tool included in the official Android SDK [<a href="http://developer.android.com/tools/help/index.html">Resources, 47</a>].</p>
+
+<p>Devices implementations MUST NOT extend either the .apk [<a href="http://developer.android.com/guide/components/fundamentals.html">Resources, 48</a>], Android Manifest [<a href="http://developer.android.com/guide/topics/manifest/manifest-intro.html">Resources, 49</a>], Dalvik bytecode [<a href="https://android.googlesource.com/platform/dalvik/+/lollipop-release/docs/">Resources, 20</a>], or RenderScript bytecode formats in such a way that would prevent those
+files from installing and running correctly on other compatible devices.</p>
+
+<h1 id="5_multimedia_compatibility">5. Multimedia Compatibility</h1>
+
+
+<h2 id="5_1_media_codecs">5.1. Media Codecs</h2>
+
+
+<p>Device implementations MUST support the core media formats specified in the
+Android SDK documentation [<a href="http://developer.android.com/guide/appendix/media-formats.html">Resources, 50</a>] except where explicitly permitted in this document. Specifically, device
+implementations MUST support the media formats, encoders, decoders, file types,
+and container formats defined in the tables below and reported via MediaCodecList
+[<a href="http://developer.android.com/reference/android/media/MediaCodecList.html">Resources,112</a>].
+Device implementations MUST also be able to decode all profiles reported in its CamcorderProfile
+[<a href="http://developer.android.com/reference/android/media/CamcorderProfile.html">Resources,
+113</a>].
+
+All of these codecs are
+provided as software implementations in the preferred Android implementation
+from the Android Open Source Project.</p>
+
+<p>Please note that neither Google nor the Open Handset Alliance make any
+representation that these codecs are free from third-party patents. Those
+intending to use this source code in hardware or software products are advised
+that implementations of this code, including in open source software or
+shareware, may require patent licenses from the relevant patent holders.</p>
+
+<h3 id="5_1_1_audio_codecs">5.1.1. Audio Codecs</h3>
+
+<table>
+ <tr>
+    <th>Format/Codec</th>
+    <th>Encoder</th>
+    <th>Decoder</th>
+    <th>Details</th>
+    <th>Supported File Types/Container Formats</th>
+ </tr>
+ <tr>
+    <td>MPEG-4 AAC Profile</p>
+
+<p>(AAC LC)</td>
+    <td>REQUIRED<sup>1</sup></td>
+    <td>REQUIRED</td>
+    <td>Support for mono/stereo/5.0/5.1<sup>2</sup> content with standard sampling rates from 8 to
+48 kHz.</td>
+    <td>
+    <ul>
+    <li class="table_list">3GPP (.3gp)</li>
+    <li class="table_list">MPEG-4 (.mp4, .m4a)</li>
+    <li class="table_list">ADTS raw AAC (.aac, decode in Android 3.1+, encode in Android 4.0+, ADIF not
+supported)</li>
+    <li class="table_list">MPEG-TS (.ts, not seekable, Android 3.0+)</li></ul></td>
+ </tr>
+ <tr>
+    <td>MPEG-4 HE AAC Profile (AAC+)</td>
+    <td>REQUIRED<sup>1</sup><br>(Android 4.1+)</td>
+    <td>REQUIRED</td>
+    <td>Support for mono/stereo/5.0/5.1<sup>2</sup> content with standard sampling rates from 16
+to 48 kHz.</td>
+    <td></td>
+ </tr>
+ <tr>
+    <td>MPEG-4 HE AACv2</p>
+
+<p>Profile (enhanced AAC+)</td>
+    <td> </td>
+    <td>REQUIRED</td>
+    <td>Support for mono/stereo/5.0/5.1<sup>2</sup> content with standard sampling rates from 16
+to 48 kHz.</td>
+    <td></td>
+ </tr>
+ <tr>
+    <td>AAC ELD (enhanced low delay AAC)</td>
+    <td>REQUIRED<sup>1</sup> </p>
+
+<p>(Android 4.1+)</td>
+    <td>REQUIRED</p>
+
+<p>(Android 4.1+)</td>
+    <td>Support for mono/stereo content with standard sampling rates from 16 to 48 kHz.</td>
+    <td></td>
+ </tr>
+ <tr>
+    <td>AMR-NB</td>
+    <td>REQUIRED<sup>3</sup></td>
+    <td>REQUIRED<sup>3</sup></td>
+    <td>4.75 to 12.2 kbps sampled @ 8kHz</td>
+    <td>3GPP (.3gp)</td>
+ </tr>
+ <tr>
+    <td>AMR-WB</td>
+    <td>REQUIRED<sup>3</sup></td>
+    <td>REQUIRED<sup>3</sup></td>
+    <td>9 rates from 6.60 kbit/s to 23.85 kbit/s sampled @ 16kHz</td>
+    <td></td>
+ </tr>
+ <tr>
+    <td>FLAC</td>
+    <td></td>
+    <td>REQUIRED <br>(Android 3.1+)</td>
+    <td>Mono/Stereo (no multichannel). Sample rates up to 48 kHz (but up to 44.1 kHz is
+recommended on devices with 44.1 kHz output, as the 48 to 44.1 kHz downsampler
+does not include a low-pass filter). 16-bit recommended; no dither applied for
+24-bit.</td>
+    <td>FLAC (.flac) only</td>
+ </tr>
+ <tr>
+    <td>MP3</td>
+    <td></td>
+    <td>REQUIRED</td>
+    <td>Mono/Stereo 8-320Kbps constant (CBR) or variable bitrate (VBR)</td>
+    <td>MP3 (.mp3)</td>
+ </tr>
+ <tr>
+    <td>MIDI</td>
+    <td></td>
+    <td>REQUIRED</td>
+    <td>MIDI Type 0 and 1. DLS Version 1 and 2. XMF and Mobile XMF. Support for
+ringtone formats RTTTL/RTX, OTA, and iMelody</td>
+    <td><ul>
+    <li class="table_list">Type 0 and 1 (.mid, .xmf, .mxmf)</li>
+    <li class="table_list">RTTTL/RTX (.rtttl, .rtx)</li>
+    <li class="table_list">OTA (.ota)</li>
+    <li class="table_list">iMelody (.imy)</li></ul></td>
+ </tr>
+ <tr>
+    <td>Vorbis</td>
+    <td></td>
+    <td>REQUIRED</td>
+    <td></td>
+    <td><ul>
+    <li class="table_list">Ogg (.ogg)</li>
+    <li class="table_list">Matroska (.mkv, Android 4.0+)</li></ul></td>
+ </tr>
+ <tr>
+    <td>PCM/WAVE</td>
+    <td>REQUIRED<sup>4</sup><br> (Android 4.1+)</td>
+    <td>REQUIRED</td>
+    <td>16-bit linear PCM (rates up to limit of hardware). Devices MUST support
+sampling rates for raw PCM recording at 8000, 11025, 16000, and 44100 Hz
+frequencies.</td>
+    <td>WAVE (.wav)</td>
+ </tr>
+ <tr>
+    <td>Opus</td>
+    <td></td>
+    <td>REQUIRED<br> (Android 5.0+)</td>
+    <td></td>
+    <td>Matroska (.mkv)</td>
+ </tr>
+</table>
+
+
+<p class="table_footnote"> 1 Required for device implementations that define android.hardware.microphone
+but optional for Android Watch device implementations.</p>
+
+<p class="table_footnote">2 Only downmix of 5.0/5.1 content is required; recording or rendering more than
+2 channels is optional.</p>
+
+<p class="table_footnote">3 Required for Android Handheld device implementations. </p>
+
+<p class="table_footnote">4 Required for device implementations that define android.hardware.microphone,
+including Android Watch device implementations.</p>
+
+<h3 id="5_1_2_image_codecs">5.1.2. Image Codecs</h3>
+
+<table>
+ <tr>
+    <th>Format/Codec</th>
+    <th>Encoder</th>
+    <th>Decoder</th>
+    <th>Details</th>
+    <th>Supported File Types/Container Formats</th>
+ </tr>
+ <tr>
+    <td>JPEG</td>
+    <td>REQUIRED</td>
+    <td>REQUIRED</td>
+    <td>Base+progressive</td>
+    <td>JPEG (.jpg)</td>
+ </tr>
+ <tr>
+    <td>GIF</td>
+    <td></td>
+    <td>REQUIRED</td>
+    <td></td>
+    <td>GIF (.gif)</td>
+ </tr>
+ <tr>
+    <td>PNG</td>
+    <td>REQUIRED</td>
+    <td>REQUIRED</td>
+    <td></td>
+    <td>PNG (.png)</td>
+ </tr>
+ <tr>
+    <td>BMP</td>
+    <td></td>
+    <td>REQUIRED</td>
+    <td></td>
+    <td>BMP (.bmp)</td>
+ </tr>
+ <tr>
+    <td>WebP</td>
+    <td>REQUIRED</td>
+    <td>REQUIRED</td>
+    <td></td>
+    <td>WebP (.webp)</td>
+ </tr>
+</table>
+
+
+<h3 id="5_1_3_video_codecs">5.1.3. Video Codecs</h3>
+
+<p>Video codecs are optional for Android Watch device implementations.</p>
+
+<table>
+ <tr>
+    <th>Format/Codec</th>
+    <th>Encoder</th>
+    <th>Decoder</th>
+    <th>Details</th>
+    <th>Supported File Types/<br>Container Formats</th>
+ </tr>
+ <tr>
+    <td>H.263</td>
+    <td>REQUIRED<sup>1</sup></td>
+    <td>REQUIRED<sup>2</sup></td>
+    <td></td>
+    <td><ul>
+    <li class="table_list">3GPP (.3gp)</li>
+    <li class="table_list">MPEG-4 (.mp4)</li></ul></td>
+ </tr>
+ <tr>
+    <td>H.264 AVC</td>
+    <td>REQUIRED<sup>2</sup></td>
+    <td>REQUIRED<sup>2</sup></td>
+    <td>See <a href="#5_2_video_encoding">section 5.2 </a>and <a href="#5_3_video_decoding">5.3</a> for details</td>
+    <td><ul>
+    <li class="table_list">3GPP (.3gp)</li>
+    <li class="table_list">MPEG-4 (.mp4)</li>
+    <li class="table_list">MPEG-TS (.ts, AAC audio only, not seekable, Android 3.0+)</li></ul></td>
+ </tr>
+ <tr>
+    <td>H.265 HEVC</td>
+    <td></td>
+    <td>REQUIRED<sup>5</sup></td>
+    <td>See <a href="#5_3_video_decoding">section 5.3</a> for details</td>
+    <td>MPEG-4 (.mp4)</td>
+ </tr>
+ <tr>
+    <td>MPEG-4 SP</td>
+    <td></td>
+    <td>REQUIRED<sup>2</sup></td>
+    <td></td>
+    <td>3GPP (.3gp)</td>
+ </tr>
+ <tr>
+    <td>VP8<sup>3</sup></td>
+    <td>REQUIRED<sup>2</sup></p>
+
+<p>(Android 4.3+)</td>
+    <td>REQUIRED<sup>2</sup></p>
+
+<p>(Android 2.3.3+)</td>
+    <td>See <a href="#5_2_video_encoding">section 5.2</a> and <a href="#5_3_video_decoding">5.3</a> for details</td>
+    <td><ul>
+    <li class="table_list">WebM (.webm) [<a href="http://www.webmproject.org/">Resources, 110</a></li>
+    <li class="table_list">Matroska (.mkv, Android 4.0+)<sup>4</sup></li></ul></td>
+ </tr>
+ <tr>
+    <td>VP9</td>
+    <td></td>
+    <td>REQUIRED<sup>2</sup><br> (Android 4.4+)</td>
+    <td>See <a href="#5_3_video_decoding">section 5.3</a> for details</td>
+    <td><ul>
+    <li class="table_list">WebM (.webm) [<a href="http://www.webmproject.org/">Resources, 110</a>]</li>
+    <li class="table_list">Matroska (.mkv, Android 4.0+)<sup>4</sup></li></ul></td>
+ </tr>
+</table>
+
+
+<p class="table_footnote">1 Required for device implementations that include camera hardware and define
+android.hardware.camera or android.hardware.camera.front.</p>
+
+<p class="table_footnote">2 Required for device implementations except Android Watch devices. </p>
+
+<p class="table_footnote">3 For acceptable quality of web video streaming and video-conference services,
+device implementations SHOULD use a hardware VP8 codec that meets the
+requirements in [<a href="http://www.webmproject.org/hardware/rtc-coding-requirements/">Resources, 51</a>].</p>
+
+<p class="table_footnote">4 Device implementations SHOULD support writing Matroska WebM files.</p>
+
+<p class="table_footnote">5 Strongly recommended for Android Automotive, optional for Android Watch, and required for all other device types.</p>
+
+<h2 id="5_2_video_encoding">5.2. Video Encoding</h2>
+
+<div class="note">
+<p>Video codecs are optional for Android Watch device implementations.</p>
+</div>
+
+
+<p>Android device implementations with H.264 codec support, MUST support Baseline
+Profile Level 3 and the following SD (Standard Definition) video encoding
+profiles and SHOULD support Main Profile Level 4 and the following HD (High
+Definition) video encoding profiles. Android Television devices are STRONGLY
+RECOMMENDED to encode HD 1080p video at 30 fps.</p>
+<table>
+ <tr>
+    <th></th>
+    <th>SD (Low quality)</th>
+    <th>SD (High quality)</th>
+    <th>HD 720p1</th>
+    <th>HD 1080p1</th>
+ </tr>
+ <tr>
+    <th>Video resolution</th>
+    <td>320 x 240 px</td>
+    <td>720 x 480 px</td>
+    <td>1280 x 720 px</td>
+    <td>1920 x 1080 px</td>
+ </tr>
+ <tr>
+    <th>Video frame rate</th>
+    <td>20 fps</td>
+    <td>30 fps</td>
+    <td>30 fps</td>
+    <td>30 fps</td>
+ </tr>
+ <tr>
+    <th>Video bitrate</th>
+    <td>384 Kbps</td>
+    <td>2 Mbps</td>
+    <td>4 Mbps</td>
+    <td>10 Mbps</td>
+ </tr>
+</table>
+
+
+<p class="table_footnote">1 When supported by hardware, but STRONGLY RECOMMENDED for Android Television
+devices.</p>
+
+<p>Android device implementations with VP8 codec support MUST support the SD video
+encoding profiles and SHOULD support the following HD (High Definition) video
+encoding profiles.</p>
+<table>
+ <tr>
+    <th></th>
+    <th>SD (Low quality)</th>
+    <th>SD (High quality)</th>
+    <th>HD 720p1</th>
+    <th>HD 1080p1</th>
+ </tr>
+ <tr>
+    <th>Video resolution</th>
+    <td>320 x 180 px</td>
+    <td>640 x 360 px</td>
+    <td>1280 x 720 px</td>
+    <td>1920 x 1080 px</td>
+ </tr>
+ <tr>
+    <th>Video frame rate</th>
+    <td>30 fps</td>
+    <td>30 fps</td>
+    <td>30 fps</td>
+    <td>30 fps</td>
+ </tr>
+ <tr>
+    <th>Video bitrate</th>
+    <td>800 Kbps </td>
+    <td>2 Mbps</td>
+    <td>4 Mbps</td>
+    <td>10 Mbps</td>
+ </tr>
+</table>
+
+<p class="table_footnote">1 When supported by hardware.</p>
+
+<h2 id="5_3_video_decoding">5.3. Video Decoding</h2>
+
+<div class="note">
+<p>Video codecs are optional for Android Watch device implementations.</p>
+</div>
+
+
+<p>Device implementations MUST support dynamic video resolution switching within
+the same stream for all VP8, VP9, H.264, and H.265 codecs exposed through the
+standard Android APIs.</p>
+
+<p>Android device implementations with H.264 decoders, MUST support Baseline
+Profile Level 3 and the following SD video decoding profiles and SHOULD support
+the HD decoding profiles. Android Television devices MUST support High Profile
+Level 4.2 and the HD 1080p decoding profile.</p>
+<table>
+ <tr>
+    <th></th>
+    <th>SD (Low quality)</th>
+    <th>SD (High quality)</th>
+    <th>HD 720p1</th>
+    <th>HD 1080p1</th>
+ </tr>
+ <tr>
+    <th>Video resolution</th>
+    <td>320 x 240 px</td>
+    <td>720 x 480 px</td>
+    <td>1280 x 720 px</td>
+    <td>1920 x 1080 px</td>
+ </tr>
+ <tr>
+    <th>Video frame rate</th>
+    <td>30 fps</td>
+    <td>30 fps</td>
+    <td>30 fps / 60 fps2</td>
+    <td>30 fps / 60 fps2</td>
+ </tr>
+ <tr>
+    <th>Video bitrate</th>
+    <td>800 Kbps </td>
+    <td>2 Mbps</td>
+    <td>8 Mbps</td>
+    <td>20 Mbps</td>
+ </tr>
+</table>
+
+
+<p class="table_footnote">1 Required for Android Television device implementations, but for other device
+types only when supported by hardware.</p>
+
+<p class="table_footnote">2 Required for Android Television device implementations.</p>
+
+<p>Android device implementations when supporting VP8 codec as described in <a href="#5_1_3_video_codecs">section 5.1.3</a>, MUST support the following SD decoding profiles and SHOULD support the HD
+decoding profiles. Android Television devices MUST support the HD 1080p
+decoding profile.  </p>
+<table>
+ <tr>
+    <th></th>
+    <th>SD (Low quality)</th>
+    <th>SD (High quality)</th>
+    <th>HD 720p1</th>
+    <th>HD 1080p1</th>
+ </tr>
+ <tr>
+    <th>Video resolution</th>
+    <td>320 x 180 px</td>
+    <td>640 x 360 px</td>
+    <td>1280 x 720 px</td>
+    <td>1920 x 1080 px</td>
+ </tr>
+ <tr>
+    <th>Video frame rate</th>
+    <td>30 fps</td>
+    <td>30 fps</td>
+    <td>30 fps / 60 fps2</td>
+    <td>30 / 60 fps2</td>
+ </tr>
+ <tr>
+    <th>Video bitrate</th>
+    <td>800 Kbps </td>
+    <td>2 Mbps</td>
+    <td>8 Mbps</td>
+    <td>20 Mbps</td>
+ </tr>
+</table>
+
+
+<p class="table_footnote">1 Required for Android Television device implementations, but for other type of
+devices only when supported by hardware.</p>
+
+<p class="table_footnote">2 Required for Android Television device implementations.</p>
+
+<p>Android device implementations, when supporting VP9 codec as described in <a href="#5_1_3_video_codecs">section 5.1.3</a>, MUST support the following SD video decoding profiles and SHOULD support the
+HD decoding profiles. Android Television devices are STRONGLY RECOMMENDED to
+support the HD 1080p decoding profile and SHOULD support the UHD decoding
+profile. When the UHD video decoding profile is supported, it MUST support 8
+bit color depth.</p>
+<table>
+ <tr>
+    <th></th>
+    <th>SD (Low quality)</th>
+    <th>SD (High quality)</th>
+    <th>HD 720p 1</th>
+    <th>HD 1080p 2</th>
+    <th>UHD 2</th>
+ </tr>
+ <tr>
+    <th>Video resolution</th>
+    <td>320 x 180 px</td>
+    <td>640 x 360 px</td>
+    <td>1280 x 720 px</td>
+    <td>1920 x 1080 px</td>
+    <td>3840 x 2160 px</td>
+ </tr>
+ <tr>
+    <th>Video frame rate</th>
+    <td>30 fps</td>
+    <td>30 fps</td>
+    <td>30 fps</td>
+    <td>30 fps</td>
+    <td>30 fps</td>
+ </tr>
+ <tr>
+    <th>Video bitrate</th>
+    <td>600 Kbps </td>
+    <td>1.6 Mbps</td>
+    <td>4 Mbps</td>
+    <td>10 Mbps</td>
+    <td>20 Mbps</td>
+ </tr>
+</table>
+
+
+<p class="table_footnote">1 Required for Android Television device implementations, but for other type of
+devices only when supported by hardware.</p>
+
+<p class="table_footnote">2 STRONGLY RECOMMENDED for Android Television device implementations when
+supported by hardware.</p>
+
+<p>Android device implementations, when supporting H.265 codec as described in <a href="#5_1_3_video_codecs">section 5.1.3</a>, MUST support the Main Profile Level 3 Main tier and the following SD video
+decoding profiles and SHOULD support the HD decoding profiles. Android
+Television devices MUST support the Main Profile Level 4.1 Main tier and the HD
+1080p decoding profile and SHOULD support Main10 Level 5 Main Tier profile and
+the UHD decoding profile.</p>
+<table>
+ <tr>
+    <th></th>
+    <th>SD (Low quality)</th>
+    <th>SD (High quality)</th>
+    <th>HD 720p </strong>1 </td>
+    <th>HD 1080p </strong>1 </td>
+    <th>UHD </strong>2</td>
+ </tr>
+ <tr>
+    <th>Video resolution</th>
+    <td>352 x 288 px</td>
+    <td>640 x 360 px</td>
+    <td>1280 x 720 px</td>
+    <td>1920 x 1080 px</td>
+    <td>3840 x 2160 px</td>
+ </tr>
+ <tr>
+    <th>Video frame rate</th>
+    <td>30 fps</td>
+    <td>30 fps</td>
+    <td>30 fps</td>
+    <td>30 fps</td>
+    <td>30 fps</td>
+ </tr>
+ <tr>
+    <th>Video bitrate</th>
+    <td>600 Kbps </td>
+    <td>1.6 Mbps</td>
+    <td>4 Mbps</td>
+    <td>10 Mbps</td>
+    <td>20 Mbps</td>
+ </tr>
+</table>
+
+
+<p class="table_footnote">1 Required for Android Television device implementation, but for other type of
+devices only when supported by hardware.</p>
+
+<p class="table_footnote">2 Required for Android Television device implementations when supported by
+hardware.</p>
+
+<h2 id="5_4_audio_recording">5.4. Audio Recording</h2>
+
+
+<p>While some of the requirements outlined in this section are stated as SHOULD
+since Android 4.3, the Compatibility Definition for a future version is planned
+to change these to MUST. Existing and new Android devices are <strong>very strongly encouraged</strong> to meet these requirements, or they will not be able to attain Android
+compatibility when upgraded to the future version.</p>
+
+<h3 id="5_4_1_raw_audio_capture">5.4.1. Raw Audio Capture</h3>
+
+
+<p>Device implementations that declare android.hardware.microphone MUST allow
+capture of raw audio content with the following characteristics:</p>
+
+<ul>
+  <li><strong>Format</strong>: Linear PCM, 16-bit
+  <li><strong>Sampling rates</strong>: 8000, 11025, 16000, 44100
+  <li><strong>Channels</strong>: Mono
+</ul>
+
+<p>Device implementations that declare android.hardware.microphone SHOULD allow
+capture of raw audio content with the following characteristics:</p>
+
+<ul>
+  <li><strong>Format</strong>: Linear PCM, 16-bit
+  <li><strong>Sampling rates</strong>: 22050, 48000
+  <li><strong>Channels</strong>: Stereo
+</ul>
+
+<h3 id="5_4_2_capture_for_voice_recognition">5.4.2. Capture for Voice Recognition</h3>
+
+
+<p>In addition to the above recording specifications, when an application has
+started recording an audio stream using the
+android.media.MediaRecorder.AudioSource.VOICE_RECOGNITION audio source:</p>
+
+<ul>
+  <li>The device SHOULD exhibit approximately flat amplitude versus frequency
+characteristics: specifically, ±3 dB, from 100 Hz to 4000 Hz.
+  <li>Audio input sensitivity SHOULD be set such that a 90 dB sound power level (SPL)
+source at 1000 Hz yields RMS of 2500 for 16-bit samples.
+  <li>PCM amplitude levels SHOULD linearly track input SPL changes over at least a 30
+dB range from -18 dB to +12 dB re 90 dB SPL at the microphone.
+  <li>Total harmonic distortion SHOULD be less than 1% for 1Khz at 90 dB SPL input
+level at the microphone.
+  <li>Noise reduction processing, if present, MUST be disabled.
+  <li>Automatic gain control, if present, MUST be disabled
+</ul>
+
+<p>If the platform supports noise suppression technologies tuned for speech
+recognition, the effect MUST be controllable from the
+android.media.audiofx.NoiseSuppressor API. Moreover, the UUID field for the
+noise suppressor&rsquo;s effect descriptor MUST uniquely identify each implementation
+of the noise suppression technology.</p>
+
+<h3 id="5_4_3_capture_for_rerouting_of_playback">5.4.3. Capture for Rerouting of Playback</h3>
+
+
+<p>The android.media.MediaRecorder.AudioSource class includes the REMOTE_SUBMIX
+audio source. Devices that declare android.hardware.audio.output MUST properly
+implement the REMOTE_SUBMIX audio source so that when an application uses the
+android.media.AudioRecord API to record from this audio source, it can capture
+a mix of all audio streams except for the following:</p>
+
+<ul>
+  <li>STREAM_RING
+  <li>STREAM_ALARM
+  <li>STREAM_NOTIFICATION
+</ul>
+
+<h2 id="5_5_audio_playback">5.5. Audio Playback</h2>
+
+
+<p>Device implementations that declare android.hardware.audio.output MUST conform
+to the requirements in this section.</p>
+
+<h3 id="5_5_1_raw_audio_playback">5.5.1. Raw Audio Playback</h3>
+
+
+<p>The device MUST allow playback of raw audio content with the following
+characteristics:</p>
+
+<ul>
+  <li><strong>Format</strong>: Linear PCM, 16-bit</li>
+  <li><strong>Sampling rates</strong>: 8000, 11025, 16000, 22050, 32000, 44100</li>
+  <li><strong>Channels</strong>: Mono, Stereo</li>
+</ul>
+
+<p>The device SHOULD allow playback of raw audio content with the following
+characteristics:</p>
+
+<ul>
+  <li><strong>Sampling rates</strong>: 24000, 48000</li>
+</ul>
+
+<h3 id="5_5_2_audio_effects">5.5.2. Audio Effects</h3>
+
+
+<p>Android provides an API for audio effects for device implementations [<a href="http://developer.android.com/reference/android/media/audiofx/AudioEffect.html">Resources, 52</a>]. Device implementations that declare the feature
+android.hardware.audio.output:</p>
+
+<ul>
+  <li>MUST support the EFFECT_TYPE_EQUALIZER and EFFECT_TYPE_LOUDNESS_ENHANCER
+implementations controllable through the AudioEffect subclasses Equalizer,
+LoudnessEnhancer.</li>
+  <li>MUST support the visualizer API implementation, controllable through the
+Visualizer class.</li>
+  <li>SHOULD support the EFFECT_TYPE_BASS_BOOST, EFFECT_TYPE_ENV_REVERB,
+EFFECT_TYPE_PRESET_REVERB, and EFFECT_TYPE_VIRTUALIZER implementations
+controllable through the AudioEffect sub-classes BassBoost,
+EnvironmentalReverb, PresetReverb, and Virtualizer.</li>
+</ul>
+
+<h3 id="5_5_3_audio_output_volume">5.5.3. Audio Output Volume</h3>
+
+
+<p>Android Television device implementations MUST include support for system
+Master Volume and digital audio output volume attenuation on supported outputs,
+except for compressed audio passthrough output (where no audio decoding is done
+on the device).</p>
+
+<h2 id="5_6_audio_latency">5.6. Audio Latency</h2>
+
+
+<p>Audio latency is the time delay as an audio signal passes through a system.
+Many classes of applications rely on short latencies, to achieve real-time
+sound effects.</p>
+
+<p>For the purposes of this section, use the following definitions:</p>
+
+<ul>
+  <li><strong>output latency</strong>. The interval between when an application writes a frame of PCM-coded data and
+when the corresponding sound can be heard by an external listener or observed
+by a transducer.</li>
+  <li><strong>cold output latency</strong>. The output latency for the first frame, when the audio output system has been
+idle and powered down prior to the request.</li>
+  <li><strong>continuous output latency</strong>. The output latency for subsequent frames, after the device is playing audio.</li>
+  <li><strong>input latency</strong>. The interval between when an external sound is presented to the device and
+when an application reads the corresponding frame of PCM-coded data.</li>
+  <li><strong>cold input latency</strong>. The sum of lost input time and the input latency for the first frame, when the
+audio input system has been idle and powered down prior to the request.</li>
+  <li><strong>continuous input latency</strong>. The input latency for subsequent frames, while the device is capturing audio.</li>
+  <li><strong>cold output jitter</strong>. The variance among separate measurements of cold output latency values.</li>
+  <li><strong>cold input jitter</strong>. The variance among separate measurements of cold input latency values.</li>
+  <li><strong>continuous round-trip latency</strong>. The sum of continuous input latency plus continuous output latency plus 5
+milliseconds.</li>
+  <li><strong>OpenSL ES PCM buffer queue API</strong>. The set of PCM-related OpenSL ES APIs within Android NDK; see
+NDK_root/docs/opensles/index.html.</li>
+</ul>
+
+<p>Device implementations that declare android.hardware.audio.output SHOULD meet
+or exceed these audio output requirements:</p>
+
+<ul>
+  <li>cold output latency of 100 milliseconds or less</li>
+  <li>continuous output latency of 45 milliseconds or less</li>
+  <li>minimize the cold output jitter</li>
+</ul>
+
+<p>If a device implementation meets the requirements of this section after any
+initial calibration when using the OpenSL ES PCM buffer queue API, for
+continuous output latency and cold output latency over at least one supported
+audio output device, it MAY report support for low-latency audio, by reporting
+the feature android.hardware.audio.low_latency via the
+android.content.pm.PackageManager class [<a href="http://developer.android.com/reference/android/content/pm/PackageManager.html">Resources, 53</a>]. Conversely, if the device implementation does not meet these requirements it
+MUST NOT report support for low-latency audio.</p>
+
+<p>Device implementations that include android.hardware.microphone SHOULD meet
+these input audio requirements:</p>
+
+<ul>
+  <li>cold input latency of 100 milliseconds or less</li>
+  <li>continuous input latency of 30 milliseconds or less</li>
+  <li>continuous round-trip latency of 50 milliseconds or less</li>
+  <li>minimize the cold input jitter</li>
+</ul>
+
+<h2 id="5_7_network_protocols">5.7. Network Protocols</h2>
+
+
+<p>Devices MUST support the media network protocols for audio and video playback
+as specified in the Android SDK documentation [<a href="http://developer.android.com/guide/appendix/media-formats.html">Resources, 50</a>]. Specifically, devices MUST support the following media network protocols:</p>
+
+<ul>
+  <li>RTSP (RTP, SDP)</li>
+  <li>HTTP(S) progressive streaming</li>
+  <li>HTTP(S) Live Streaming draft protocol, Version 3 [<a href="http://tools.ietf.org/html/draft-pantos-http-live-streaming-03">Resources, 54</a>]</li>
+</ul>
+
+<h2 id="5_8_secure_media">5.8. Secure Media</h2>
+
+
+<p>Device implementations that support secure video output and are capable of
+supporting secure surfaces MUST declare support for Display.FLAG_SECURE. Device
+implementations that declare support for Display.FLAG_SECURE, if they support a
+wireless display protocol, MUST secure the link with a cryptographically strong
+mechanism such as HDCP 2.x or higher for Miracast wireless displays. Similarly
+if they support a wired external display, the device implementations MUST
+support HDCP 1.2 or higher. Android Television device implementations MUST
+support HDCP 2.2 for devices supporting 4K resolution and HDCP 1.4 or above for
+lower resolutions. The upstream Android open source implementation includes
+support for wireless (Miracast) and wired (HDMI) displays that satisfies this
+requirement.</p>
+
+<h2 id="5_9_midi">5.9. Musical Instrument Digital Interface (MIDI)</h2>
+
+<p>
+If a device implementation supports the inter-app MIDI software transport
+(virtual MIDI devices), and it supports MIDI over
+<em>all</em> of the following MIDI-capable hardware transports
+for which it provides generic non-MIDI connectivity, it MAY report
+support for feature android.software.midi via the
+android.content.pm.PackageManager class
+[<a href="http://developer.android.com/reference/android/content/pm/PackageManager.html">Resources, 53</a>].
+</p>
+
+<p>The MIDI-capable hardware transports are:</p>
+<ul>
+  <li>USB host mode (section 7.7 USB)</li>
+  <li>USB peripheral mode (section 7.7 USB)</li>
+</ul>
+
+<p>
+Conversely, if the device implementation provides generic non-MIDI connectivity over a particular
+MIDI-capable hardware transport listed above, but does not support MIDI over that hardware transport,
+it MUST NOT report support for feature android.software.midi.
+</p>
+
+<p>
+MIDI over Bluetooth LE acting in central role (section 7.4.3 Bluetooth)
+is in trial use status.  A device implementation that reports
+feature android.software.midi, and which provides generic non-MIDI connectivity
+over Bluetooth LE, SHOULD support MIDI over Bluetooth LE.
+</p>
+
+<h1 id="6_developer_tools_and_options_compatibility">6. Developer Tools and Options Compatibility</h1>
+
+<h2 id="6_1_developer_tools">6.1. Developer Tools</h2>
+
+<p>Device implementations MUST support the Android Developer Tools provided in the
+Android SDK. Android compatible devices MUST be compatible with:</p>
+
+<ul>
+  <li><strong>Android Debug Bridge (adb)</strong> [<a href="http://developer.android.com/tools/help/adb.html">Resources, 55</a>]</li>
+</ul>
+
+<p>Device implementations MUST support all adb functions as documented in the
+Android SDK including dumpsys [<a href="https://source.android.com/devices/input/diagnostics.html">Resources, 56</a>]. The device-side adb daemon MUST be inactive by default and there MUST be a
+user-accessible mechanism to turn on the Android Debug Bridge. If a device
+implementation omits USB peripheral mode, it MUST implement the Android Debug
+Bridge via local-area network (such as Ethernet or 802.11). </p>
+
+<p>Android includes support for secure adb. Secure adb enables adb on known
+authenticated hosts. Device implementations MUST support secure adb.</p>
+
+<ul>
+  <li><strong>Dalvik Debug Monitor Service (ddms)</strong> [<a href="http://developer.android.com/tools/debugging/ddms.html">Resources, 57</a>]</li>
+</ul>
+
+<p>Device implementations MUST support all ddms features as documented in the
+Android SDK. As ddms uses adb, support for ddms SHOULD be inactive by default,
+but MUST be supported whenever the user has activated the Android Debug Bridge,
+as above.</p>
+
+<ul>
+  <li><strong>Monkey</strong> [<a href="http://developer.android.com/tools/help/monkey.html">Resources, 58</a>]</li>
+</ul>
+
+<p>Device implementations MUST include the Monkey framework, and make it available
+for applications to use.</p>
+
+<ul>
+  <li><strong>SysTrace</strong> [<a href="http://developer.android.com/tools/help/systrace.html">Resources, 59</a>]</li>
+</ul>
+
+<p>Device implementations MUST support systrace tool as documented in the Android
+SDK. Systrace must be inactive by default, and there MUST be a user-accessible
+mechanism to turn on Systrace.</p>
+
+<p>Most Linux-based systems and Apple Macintosh systems recognize Android devices
+using the standard Android SDK tools, without additional support; however
+Microsoft Windows systems typically require a driver for new Android devices.
+(For instance, new vendor IDs and sometimes new device IDs require custom USB
+drivers for Windows systems.) If a device implementation is unrecognized by the
+adb tool as provided in the standard Android SDK, device implementers MUST
+provide Windows drivers allowing developers to connect to the device using the
+adb protocol. These drivers MUST be provided for Windows XP, Windows Vista,
+Windows 7, Windows 8, and Windows 9 in both 32-bit and 64-bit versions.</p>
+
+<h2 id="6_2_developer_options">6.2. Developer Options</h2>
+
+
+<p>Android includes support for developers to configure application
+development-related settings. Device implementations MUST honor the
+android.settings.APPLICATION_DEVELOPMENT_SETTINGS intent to show application
+development-related settings [<a href="http://developer.android.com/reference/android/provider/Settings.html#ACTION_APPLICATION_DEVELOPMENT_SETTINGS">Resources, 60</a>]. The upstream Android implementation hides the Developer Options menu by
+default and enables users to launch Developer Options after pressing seven (7)
+times on the <strong>Settings</strong> > <strong>About Device</strong> > <strong>Build Number</strong> menu item. Device implementations MUST provide a consistent experience for
+Developer Options. Specifically, device implementations MUST hide Developer
+Options by default and MUST provide a mechanism to enable Developer Options
+that is consistent with the upstream Android implementation.</p>
+
+<h1 id="7_hardware_compatibility">7. Hardware Compatibility</h1>
+
+
+<p>If a device includes a particular hardware component that has a corresponding
+API for third-party developers, the device implementation MUST implement that
+API as described in the Android SDK documentation. If an API in the SDK
+interacts with a hardware component that is stated to be optional and the
+device implementation does not possess that component:</p>
+
+<ul>
+  <li>Complete class definitions (as documented by the SDK) for the component APIs
+MUST still be presented.
+  <li>The API&rsquo;s behaviors MUST be implemented as no-ops in some reasonable fashion.
+  <li>API methods MUST return null values where permitted by the SDK documentation.
+  <li>API methods MUST return no-op implementations of classes where null values are
+not permitted by the SDK documentation.
+  <li>API methods MUST NOT throw exceptions not documented by the SDK documentation.
+</ul>
+
+<p>A typical example of a scenario where these requirements apply is the telephony
+API: even on non-phone devices, these APIs must be implemented as reasonable
+no-ops.</p>
+
+<p>Device implementations MUST consistently report accurate hardware configuration
+information via the getSystemAvailableFeatures() and hasSystemFeature(String)
+methods on the android.content.pm.PackageManager class for the same build
+fingerprint. [<a href="http://developer.android.com/reference/android/content/pm/PackageManager.html">Resources, 53]</a></p>
+
+<h2 id="7_1_display_and_graphics">7.1. Display and Graphics</h2>
+
+
+<p>Android includes facilities that automatically adjust application assets and UI
+layouts appropriately for the device, to ensure that third-party applications
+run well on a variety of hardware configurations [<a href="http://developer.android.com/guide/practices/screens_support.html">Resources, 61</a>]. Devices MUST properly implement these APIs and behaviors, as detailed in
+this section.</p>
+
+<p>The units referenced by the requirements in this section are defined as
+follows:</p>
+
+<ul>
+  <li><strong>physical diagonal size</strong>. The distance in inches between two opposing corners of the illuminated portion
+of the display.</li>
+  <li><strong>dots per inch (dpi)</strong>. The number of pixels encompassed by a linear horizontal or vertical span of
+1&rdquo;. Where dpi values are listed, both horizontal and vertical dpi must fall
+within the range.</li>
+  <li><strong>aspect ratio</strong>. The ratio of the pixels of the longer dimension
+  to the shorter dimension of the screen. For example, a display of 480x854 pixels
+  would be 854/480 = 1.779, or roughly &ldquo;16:9&rdquo;.</li>
+  <li><strong>density-independent pixel (dp)</strong> The virtual pixel unit normalized to a 160 dpi screen, calculated as: pixels =
+dps * (density/160).</li>
+</ul>
+
+<h3 id="7_1_1_screen_configuration">7.1.1. Screen Configuration</h3>
+
+
+<h4 id="7_1_1_1_screen_size">7.1.1.1. Screen Size</h4>
+
+<div class="note">
+<p>Android Watch devices (detailed in <a href="#2_device_types">section 2</a>) MAY have smaller screen sizes as described in this section.</p>
+</div>
+
+<p>The Android UI framework supports a variety of different screen sizes, and
+allows applications to query the device screen size (aka &ldquo;screen layout") via
+android.content.res.Configuration.screenLayout with the SCREENLAYOUT_SIZE_MASK.
+Device implementations MUST report the correct screen size as defined in the
+Android SDK documentation [<a href="http://developer.android.com/guide/practices/screens_support.html">Resources, 61</a>] and determined by the upstream Android platform. Specifically, device
+implementations MUST report the correct screen size according to the following
+logical density-independent pixel (dp) screen dimensions.</p>
+
+<ul>
+  <li>Devices MUST have screen sizes of at least 426 dp x 320 dp (&lsquo;small&rsquo;), unless it
+is an Android Watch device.</li>
+  <li>Devices that report screen size &lsquo;normal&rsquo; MUST have screen sizes of at least 480
+dp x 320 dp.</li>
+  <li>Devices that report screen size &lsquo;large&rsquo; MUST have screen sizes of at least 640
+dp x 480 dp.</li>
+  <li>Devices that report screen size &lsquo;xlarge&rsquo; MUST have screen sizes of at least 960
+dp x 720 dp.</li>
+</ul>
+
+<p>In addition, </p>
+
+<ul>
+  <li>Android Watch devices MUST have a screen with the physical diagonal size in the
+range from 1.1 to 2.5 inches.</li>
+  <li>Other types of Android device implementations, with a physically integrated
+screen, MUST have a screen at least 2.5 inches in physical diagonal size.</li>
+</ul>
+
+<p>Devices MUST NOT change their reported screen size at any time.</p>
+
+<p>Applications optionally indicate which screen sizes they support via the
+&lt;supports-screens&gt; attribute in the AndroidManifest.xml file. Device
+implementations MUST correctly honor applications' stated support for small,
+normal, large, and xlarge screens, as described in the Android SDK
+documentation.</p>
+
+<h4 id="7_1_1_2_screen_aspect_ratio">7.1.1.2. Screen Aspect Ratio</h4>
+
+<div class="note">
+<p>Android Watch devices MAY have an aspect ratio of 1.0 (1:1).</p>
+</div>
+
+
+<p>The screen aspect ratio MUST be a value from 1.3333 (4:3) to 1.86 (roughly
+16:9), but Android Watch devices MAY have an aspect ratio of 1.0 (1:1) because
+such a device implementation will use a UI_MODE_TYPE_WATCH as the
+android.content.res.Configuration.uiMode.</p>
+
+<h4 id="7_1_1_3_screen_density">7.1.1.3. Screen Density</h4>
+
+
+<p>The Android UI framework defines a set of standard logical densities to help
+application developers target application resources. Device implementations
+MUST report only one of the following logical Android framework densities
+through the android.util.DisplayMetrics APIs, and MUST execute applications at
+this standard density and MUST NOT change the value at at any time for the
+default display.</p>
+
+<ul>
+  <li>120 dpi (ldpi)</li>
+  <li>160 dpi (mdpi)</li>
+  <li>213 dpi (tvdpi)</li>
+  <li>240 dpi (hdpi)</li>
+  <li>280 dpi (280dpi)</li>
+  <li>320 dpi (xhdpi)</li>
+  <li>400 dpi (400dpi)</li>
+  <li>480 dpi (xxhdpi)</li>
+  <li>560 dpi (560dpi)</li>
+  <li>640 dpi (xxxhdpi)</li>
+</ul>
+
+<p>Device implementations SHOULD define the standard Android framework density
+that is numerically closest to the physical density of the screen, unless that
+logical density pushes the reported screen size below the minimum supported. If
+the standard Android framework density that is numerically closest to the
+physical density results in a screen size that is smaller than the smallest
+supported compatible screen size (320 dp width), device implementations SHOULD
+report the next lowest standard Android framework density.</p>
+
+<h3 id="7_1_2_display_metrics">7.1.2. Display Metrics</h3>
+
+
+<p>Device implementations MUST report correct values for all display metrics
+defined in android.util.DisplayMetrics [<a href="http://developer.android.com/reference/android/util/DisplayMetrics.html">Resources, 62</a>] and MUST report the same values regardless of whether the embedded or
+external screen is used as the default display.</p>
+
+<h3 id="7_1_3_screen_orientation">7.1.3. Screen Orientation</h3>
+
+
+<p>Devices MUST report which screen orientations they support
+(android.hardware.screen.portrait and/or android.hardware.screen.landscape) and
+MUST report at least one supported orientation. For example, a device with a
+fixed orientation landscape screen, such as a television or laptop, SHOULD only
+report android.hardware.screen.landscape.</p>
+
+<p>Devices that report both screen orientations MUST support dynamic orientation
+by applications to either portrait or landscape screen orientation. That is,
+the device must respect the application&rsquo;s request for a specific screen
+orientation. Device implementations MAY select either portrait or landscape
+orientation as the default.</p>
+
+<p>Devices MUST report the correct value for the device&rsquo;s current orientation,
+whenever queried via the android.content.res.Configuration.orientation,
+android.view.Display.getOrientation(), or other APIs.</p>
+
+<p>Devices MUST NOT change the reported screen size or density when changing
+orientation.</p>
+
+<h3 id="7_1_4_2d_and_3d_graphics_acceleration">7.1.4. 2D and 3D Graphics Acceleration</h3>
+
+
+<p>Device implementations MUST support both OpenGL ES 1.0 and 2.0, as embodied and
+detailed in the Android SDK documentations. Device implementations SHOULD
+support OpenGL ES 3.0 or 3.1 on devices capable of supporting it. Device
+implementations MUST also support Android RenderScript, as detailed in the
+Android SDK documentation [<a href="http://developer.android.com/guide/topics/renderscript/">Resources, 63</a>].</p>
+
+<p>Device implementations MUST also correctly identify themselves as supporting
+OpenGL ES 1.0, OpenGL ES 2.0, OpenGL ES 3.0 or OpenGL 3.1. That is:</p>
+
+<ul>
+  <li>The managed APIs (such as via the GLES10.getString() method) MUST report support
+for OpenGL ES 1.0 and OpenGL ES 2.0.</li>
+  <li>The native C/C++ OpenGL APIs (APIs available to apps via libGLES_v1CM.so,
+libGLES_v2.so, or libEGL.so) MUST report support for OpenGL ES 1.0 and OpenGL
+ES 2.0.</li>
+  <li>Device implementations that declare support for OpenGL ES 3.0 or 3.1 MUST
+support the corresponding managed APIs and include support for native C/C++
+APIs. On device implementations that declare support for OpenGL ES 3.0 or 3.1,
+libGLESv2.so MUST export the corresponding function symbols in addition to the
+OpenGL ES 2.0 function symbols.</li>
+</ul>
+
+<p>In addition to OpenGL ES 3.1, Android provides an extension pack with Java
+interfaces [<a href="https://developer.android.com/reference/android/opengl/GLES31Ext.html">Resources, 64</a>] and native support for advanced graphics functionality such as tessellation
+and the ASTC texture compression format. Android device implementations MAY
+support this extension pack, and&mdash;only if fully implemented&mdash;MUST identify the
+support through the android.hardware.opengles.aep feature flag.</p>
+
+<p>Also, device implementations MAY implement any desired OpenGL ES extensions.
+However, device implementations MUST report via the OpenGL ES managed and
+native APIs all extension strings that they do support, and conversely MUST NOT
+report extension strings that they do not support.</p>
+
+<p>Note that Android includes support for applications to optionally specify that
+they require specific OpenGL texture compression formats. These formats are
+typically vendor-specific. Device implementations are not required by Android
+to implement any specific texture compression format. However, they SHOULD
+accurately report any texture compression formats that they do support, via the
+getString() method in the OpenGL API.</p>
+
+<p>Android includes a mechanism for applications to declare that they want to
+enable hardware acceleration for 2D graphics at the Application, Activity,
+Window, or View level through the use of a manifest tag
+android:hardwareAccelerated or direct API calls [<a href="http://developer.android.com/guide/topics/graphics/hardware-accel.html">Resources, 65</a>].</p>
+
+<p>Device implementations MUST enable hardware acceleration by default, and MUST
+disable hardware acceleration if the developer so requests by setting
+android:hardwareAccelerated="false&rdquo; or disabling hardware acceleration directly
+through the Android View APIs.</p>
+
+<p>In addition, device implementations MUST exhibit behavior consistent with the
+Android SDK documentation on hardware acceleration [<a href="http://developer.android.com/guide/topics/graphics/hardware-accel.html">Resources, 65</a>].</p>
+
+<p>Android includes a TextureView object that lets developers directly integrate
+hardware-accelerated OpenGL ES textures as rendering targets in a UI hierarchy.
+Device implementations MUST support the TextureView API, and MUST exhibit
+consistent behavior with the upstream Android implementation.</p>
+
+<p>Android includes support for EGL_ANDROID_RECORDABLE, an EGLConfig attribute
+that indicates whether the EGLConfig supports rendering to an ANativeWindow
+that records images to a video. Device implementations MUST support
+EGL_ANDROID_RECORDABLE extension [<a href="https://www.khronos.org/registry/egl/extensions/ANDROID/EGL_ANDROID_recordable.txt">Resources, 66</a>].</p>
+
+<h3 id="7_1_5_legacy_application_compatibility_mode">7.1.5. Legacy Application Compatibility Mode</h3>
+
+
+<p>Android specifies a &ldquo;compatibility mode&rdquo; in which the framework operates in a
+'normal' screen size equivalent (320dp width) mode for the benefit of legacy
+applications not developed for old versions of Android that pre-date
+screen-size independence.</p>
+
+<ul>
+<li>Android Automotive does not support legacy compatibility mode.</li>
+<li>All other device implementations MUST include support for legacy application
+compatibility mode as implemented by the upstream Android open source code. That
+is, device implementations MUST NOT alter the triggers or thresholds at which
+compatibility mode is activated, and MUST NOT alter the behavior of the
+compatibility mode itself.</li>
+</ul>
+
+<h3 id="7_1_6_screen_technology">7.1.6. Screen Technology</h3>
+
+
+<p>The Android platform includes APIs that allow applications to render rich
+graphics to the display. Devices MUST support all of these APIs as defined by
+the Android SDK unless specifically allowed in this document. </p>
+
+<ul>
+  <li>Devices MUST support displays capable of rendering 16-bit color graphics and
+SHOULD support displays capable of 24-bit color graphics.</li>
+  <li>Devices MUST support displays capable of rendering animations.</li>
+  <li>The display technology used MUST have a pixel aspect ratio (PAR) between 0.9
+and 1.15. That is, the pixel aspect ratio MUST be near square (1.0) with a 10 ~
+15% tolerance.</li>
+</ul>
+
+<h3 id="7_1_7_external_displays">7.1.7. Secondary Displays</h3>
+
+
+<p>Android includes support for secondary display to enable media sharing
+capabilities and developer APIs for accessing external displays. If a device
+supports an external display either via a wired, wireless, or an embedded
+additional display connection then the device implementation MUST implement the
+display manager API as described in the Android SDK documentation [<a href="http://developer.android.com/reference/android/hardware/display/DisplayManager.html">Resources, 67</a>].</p>
+
+<h2 id="7_2_input_devices">7.2. Input Devices</h2>
+
+<p>Devices MUST support a touchscreen or meet the requirements listed in 7.2.2
+for non-touch navigation.</p>
+
+<h3 id="7_2_1_keyboard">7.2.1. Keyboard</h3>
+
+<div class="note">
+<p>Android Watch and Android Automotive implementations MAY implement a soft
+keyboard. All other device implementations MUST implement a soft keyboard and:</p>
+</div>
+
+
+<p>Device implementations:</p>
+
+<ul>
+  <li>MUST include support for the Input Management Framework (which allows
+third-party developers to create Input Method Editors&mdash;i.e. soft keyboard) as
+detailed at <a href="http://developer.android.com">http://developer.android.com</a>.</li>
+  <li>MUST provide at least one soft keyboard implementation (regardless of whether a
+hard keyboard is present) except for Android Watch devices where the screen
+size makes it less reasonable to have a soft keyboard.</li>
+  <li>MAY include additional soft keyboard implementations.</li>
+  <li>MAY include a hardware keyboard.</li>
+  <li>MUST NOT include a hardware keyboard that does not match one of the formats
+specified in android.content.res.Configuration.keyboard [<a href="http://developer.android.com/reference/android/content/res/Configuration.html">Resources, 68</a>] (QWERTY or 12-key).</li>
+</ul>
+
+<h3 id="7_2_2_non-touch_navigation">7.2.2. Non-touch Navigation</h3>
+
+<div class="note">
+<p>Android Television devices MUST support D-pad.</p>
+</div>
+
+<p>Device implementations:</p>
+
+<ul>
+  <li>MAY omit a non-touch navigation option (trackball, d-pad, or wheel) if the
+device implementation is not an Android Television device.</li>
+  <li>MUST report the correct value for android.content.res.Configuration.navigation
+[<a href="http://developer.android.com/reference/android/content/res/Configuration.html">Resources, 68</a>].</li>
+  <li>MUST provide a reasonable alternative user interface mechanism for the
+selection and editing of text, compatible with Input Management Engines. The
+upstream Android open source implementation includes a selection mechanism
+suitable for use with devices that lack non-touch navigation inputs.</li>
+</ul>
+
+<h3 id="7_2_3_navigation_keys">7.2.3. Navigation Keys</h3>
+
+<div class="note">
+<p>The availability and visibility requirement of the Home, Recents, and Back
+functions differ between device types as described in this section.</p>
+</div>
+
+<p>The Home, Recents, and Back functions (mapped to the key events KEYCODE_HOME,
+KEYCODE_APP_SWITCH, KEYCODE_BACK, respectively) are essential to the Android
+navigation paradigm and therefore:</p>
+
+<ul>
+  <li>Android Handheld device implementations MUST provide the Home, Recents, and
+Back functions.</li>
+  <li>Android Television device implementations MUST provide the Home and Back
+functions.</li>
+  <li>Android Watch device implementations MUST have the Home function available to
+the user, and the Back function except for when it is in UI_MODE_TYPE_WATCH.</li>
+  <li>Android Automotive implementations MUST provide the Home function and MAY
+provide Back and Recent functions.</li>
+  <li>All other types of device implementations MUST provide the Home and Back
+functions.</li>
+</ul>
+
+<p>These functions MAY be implemented via dedicated physical buttons (such as
+mechanical or capacitive touch buttons), or MAY be implemented using dedicated
+software keys on a distinct portion of the screen, gestures, touch panel, etc.
+Android supports both implementations. All of these functions MUST be
+accessible with a single action (e.g. tap, double-click or gesture) when
+visible.</p>
+
+<p>Recents function, if provided, MUST have a visible button or icon unless hidden
+together with other navigation functions in full-screen mode. This does not
+apply to devices upgrading from earlier Android versions that have physical
+buttons for navigation and no recents key.</p>
+
+<p> The Home and Back functions, if provided, MUST each have a visible button or
+icon unless hidden together with other navigation functions in full-screen mode
+or when the uiMode UI_MODE_TYPE_MASK is set to UI_MODE_TYPE_WATCH.</p>
+
+<p>The Menu function is deprecated in favor of action bar since Android 4.0.
+Therefore the new device implementations shipping with Android ANDROID_VERSION and later MUST NOT
+implement a dedicated physical button for the Menu function. Older device
+implementations SHOULD NOT implement a dedicated physical button for the Menu
+function, but if the physical Menu button is implemented and the device is
+running applications with targetSdkVersion > 10, the device implementation:</p>
+
+<ul>
+  <li>MUST display the action overflow button on the action bar when it is visible
+and the resulting action overflow menu popup is not empty. For a device
+implementation launched before Android 4.4 but upgrading to Android ANDROID_VERSION, this
+is RECOMMENDED.</li>
+  <li>MUST NOT modify the position of the action overflow popup displayed by
+selecting the overflow button in the action bar.</li>
+  <li>MAY render the action overflow popup at a modified position on the screen when
+it is displayed by selecting the physical menu button.</li>
+</ul>
+
+<p>For backwards compatibility, device implementations MUST make the Menu function
+available to applications when targetSdkVersion is less than 10, either by a physical
+button, a software key, or gestures. This Menu function should be presented
+unless hidden together with other navigation functions.</p>
+
+<p>Android supports Assist action [<a href="http://developer.android.com/reference/android/content/Intent.html#ACTION_ASSIST">Resources, 69</a>]. Android device implementations except for Android Watch devices MUST make
+the Assist action available to the user at all times when running applications.
+The Assist action SHOULD be implemented as a long-press on the Home button or a
+swipe-up gesture on the software Home key. This function MAY be implemented via
+another physical button, software key, or gesture, but MUST be accessible with
+a single action (e.g. tap, double-click, or gesture) when other navigation keys
+are visible.</p>
+
+<p>Device implementations MAY use a distinct portion of the screen to display the
+navigation keys, but if so, MUST meet these requirements:</p>
+
+<ul>
+  <li>Device implementation navigation keys MUST use a distinct portion of the
+screen, not available to applications, and MUST NOT obscure or otherwise
+interfere with the portion of the screen available to applications.</li>
+  <li>Device implementations MUST make available a portion of the display to
+applications that meets the requirements defined in <a href="#7_1_1_screen_configuration">section 7.1.1</a>.</li>
+  <li>Device implementations MUST display the navigation keys when applications do
+not specify a system UI mode, or specify SYSTEM_UI_FLAG_VISIBLE.</li>
+  <li>Device implementations MUST present the navigation keys in an unobtrusive &ldquo;low
+profile&rdquo; (eg. dimmed) mode when applications specify
+SYSTEM_UI_FLAG_LOW_PROFILE.</li>
+  <li>Device implementations MUST hide the navigation keys when applications specify
+SYSTEM_UI_FLAG_HIDE_NAVIGATION.</li>
+</ul>
+
+<h3 id="7_2_4_touchscreen_input">7.2.4. Touchscreen Input</h3>
+
+<div class="note">
+<p>Android Handhelds and Watch Devices MUST support touchscreen input.</p>
+</div>
+
+
+<p>Device implementations SHOULD have a pointer input system of some kind (either
+mouse-like or touch). However, if a device implementation does not support a
+pointer input system, it MUST NOT report the android.hardware.touchscreen or
+android.hardware.faketouch feature constant. Device implementations that do
+include a pointer input system:</p>
+
+<ul>
+  <li>SHOULD support fully independently tracked pointers, if the device input system
+supports multiple pointers.</li>
+  <li>MUST report the value of android.content.res.Configuration.touchscreen [<a href="http://developer.android.com/reference/android/content/res/Configuration.html">Resources, 68</a>] corresponding to the type of the specific touchscreen on the device.</li>
+</ul>
+
+<p>Android includes support for a variety of touchscreens, touch pads, and fake
+touch input devices. Touchscreen based device implementations are associated
+with a display [<a href="http://source.android.com/devices/tech/input/touch-devices.html">Resources, 70</a>] such that the user has the impression of directly manipulating items on
+screen. Since the user is directly touching the screen, the system does not
+require any additional affordances to indicate the objects being manipulated.
+In contrast, a fake touch interface provides a user input system that
+approximates a subset of touchscreen capabilities. For example, a mouse or
+remote control that drives an on-screen cursor approximates touch, but requires
+the user to first point or focus then click. Numerous input devices like the
+mouse, trackpad, gyro-based air mouse, gyro-pointer, joystick, and multi-touch
+trackpad can support fake touch interactions. Android includes the feature
+constant android.hardware.faketouch, which corresponds to a high-fidelity
+non-touch (pointer-based) input device such as a mouse or trackpad that can
+adequately emulate touch-based input (including basic gesture support), and
+indicates that the device supports an emulated subset of touchscreen
+functionality. Device implementations that declare the fake touch feature MUST
+meet the fake touch requirements in <a href="#7_2_5_fake_touch_input">section 7.2.5</a>.</p>
+
+<p>Device implementations MUST report the correct feature corresponding to the
+type of input used. Device implementations that include a touchscreen
+(single-touch or better) MUST report the platform feature constant
+android.hardware.touchscreen. Device implementations that report the platform
+feature constant android.hardware.touchscreen MUST also report the platform
+feature constant android.hardware.faketouch. Device implementations that do not
+include a touchscreen (and rely on a pointer device only) MUST NOT report any
+touchscreen feature, and MUST report only android.hardware.faketouch if they
+meet the fake touch requirements in <a href="#7_2_5_fake_touch_input">section 7.2.5</a>.</p>
+
+<h3 id="7_2_5_fake_touch_input">7.2.5. Fake Touch Input</h3>
+
+
+<p>Device implementations that declare support for android.hardware.faketouch:</p>
+
+<ul>
+  <li>MUST report the absolute X and Y screen positions of the pointer location and
+display a visual pointer on the screen [<a href="http://developer.android.com/reference/android/view/MotionEvent.html">Resources, 71</a>].</li>
+  <li>MUST report touch event with the action code that specifies the state change
+that occurs on the pointer going down or up on the screen [<a href="http://developer.android.com/reference/android/view/MotionEvent.html">Resources, 71</a>].</li>
+  <li>MUST support pointer down and up on an object on the screen, which allows users
+to emulate tap on an object on the screen.</li>
+  <li>MUST support pointer down, pointer up, pointer down then pointer up in the same
+place on an object on the screen within a time threshold, which allows users to
+emulate double tap on an object on the screen [<a href="http://developer.android.com/reference/android/view/MotionEvent.html">Resources, 71</a>].</li>
+  <li>MUST support pointer down on an arbitrary point on the screen, pointer move to
+any other arbitrary point on the screen, followed by a pointer up, which allows
+users to emulate a touch drag.</li>
+  <li>MUST support pointer down then allow users to quickly move the object to a
+different position on the screen and then pointer up on the screen, which
+allows users to fling an object on the screen.</li>
+</ul>
+
+<p>Devices that declare support for android.hardware.faketouch.multitouch.distinct
+MUST meet the requirements for faketouch above, and MUST also support distinct
+tracking of two or more independent pointer inputs.</p>
+
+<h3 id="7_2_6_game_controller_support">7.2.6. Game Controller Support</h3>
+
+
+<p>Android Television device implementations MUST support button mappings for game
+controllers as listed below. The upstream Android implementation includes
+implementation for game controllers that satisfies this requirement. </p>
+
+<h4 id="7_2_6_1_button_mappings">7.2.6.1. Button Mappings</h4>
+
+
+<p>Android Television device implementations MUST support the following key
+mappings:</p>
+<table>
+ <tr>
+    <th>Button</th>
+    <th>HID Usage</strong><sup>2</sup></td>
+    <th>Android Button</th>
+ </tr>
+ <tr>
+    <td><a href="http://developer.android.com/reference/android/view/KeyEvent.html#KEYCODE_BUTTON_A">A</a><sup>1</sup></td>
+    <td>0x09 0x0001</td>
+    <td>KEYCODE_BUTTON_A (96)</td>
+ </tr>
+ <tr>
+    <td><a href="http://developer.android.com/reference/android/view/KeyEvent.html#KEYCODE_BUTTON_B">B</a><sup>1</sup></td>
+    <td>0x09 0x0002</td>
+    <td>KEYCODE_BUTTON_B (97)</td>
+ </tr>
+ <tr>
+    <td><a href="http://developer.android.com/reference/android/view/KeyEvent.html#KEYCODE_BUTTON_X">X</a><sup>1</sup></td>
+    <td>0x09 0x0004</td>
+    <td>KEYCODE_BUTTON_X (99)</td>
+ </tr>
+ <tr>
+    <td><a href="http://developer.android.com/reference/android/view/KeyEvent.html#KEYCODE_BUTTON_Y">Y</a><sup>1</sup></td>
+    <td>0x09 0x0005</td>
+    <td>KEYCODE_BUTTON_Y (100)</td>
+ </tr>
+ <tr>
+    <td><a href="http://developer.android.com/reference/android/view/KeyEvent.html#KEYCODE_DPAD_UP">D-pad up</a><sup>1</sup></p>
+
+<p><a href="http://developer.android.com/reference/android/view/KeyEvent.html#KEYCODE_DPAD_DOWN">D-pad down</a><sup>1</sup></td>
+    <td>0x01 0x0039<sup>3</sup></td>
+    <td><a href="http://developer.android.com/reference/android/view/MotionEvent.html#AXIS_HAT_Y">AXIS_HAT_Y</a><sup>4</sup></td>
+ </tr>
+ <tr>
+    <td><a href="http://developer.android.com/reference/android/view/KeyEvent.html#KEYCODE_DPAD_LEFT">D-pad left</a>1</p>
+
+<p><a href="http://developer.android.com/reference/android/view/KeyEvent.html#KEYCODE_DPAD_RIGHT">D-pad right</a><sup>1</sup></td>
+    <td>0x01 0x0039<sup>3</sup></td>
+    <td><a href="http://developer.android.com/reference/android/view/MotionEvent.html#AXIS_HAT_X">AXIS_HAT_X</a><sup>4</sup></td>
+ </tr>
+ <tr>
+    <td><a href="http://developer.android.com/reference/android/view/KeyEvent.html#KEYCODE_BUTTON_L1">Left shoulder button</a><sup>1</sup></td>
+    <td>0x09 0x0007</td>
+    <td>KEYCODE_BUTTON_L1 (102)</td>
+ </tr>
+ <tr>
+    <td><a href="http://developer.android.com/reference/android/view/KeyEvent.html#KEYCODE_BUTTON_R1">Right shoulder button</a><sup>1</sup></td>
+    <td>0x09 0x0008</td>
+    <td>KEYCODE_BUTTON_R1 (103)</td>
+ </tr>
+ <tr>
+    <td><a href="http://developer.android.com/reference/android/view/KeyEvent.html#KEYCODE_BUTTON_THUMBL">Left stick click</a><sup>1</sup></td>
+    <td>0x09 0x000E</td>
+    <td>KEYCODE_BUTTON_THUMBL (106)</td>
+ </tr>
+ <tr>
+    <td><a href="http://developer.android.com/reference/android/view/KeyEvent.html#KEYCODE_BUTTON_THUMBR">Right stick click</a><sup>1</sup></td>
+    <td>0x09 0x000F</td>
+    <td>KEYCODE_BUTTON_THUMBR (107)</td>
+ </tr>
+ <tr>
+    <td><a href="http://developer.android.com/reference/android/view/KeyEvent.html#KEYCODE_HOME">Home</a><sup>1</sup></td>
+    <td>0x0c 0x0223</td>
+    <td>KEYCODE_HOME (3)</td>
+ </tr>
+ <tr>
+    <td><a href="http://developer.android.com/reference/android/view/KeyEvent.html#KEYCODE_BACK">Back</a><sup>1</sup></td>
+    <td>0x0c 0x0224</td>
+    <td>KEYCODE_BACK (4)</td>
+ </tr>
+</table>
+
+
+<p class="table_footnote">1 [<a href="http://developer.android.com/reference/android/view/KeyEvent.html">Resources, 72</a>]</p>
+
+<p class="table_footnote">2 The above HID usages must be declared within a Game pad CA (0x01 0x0005).</p>
+
+<p class="table_footnote">3 This usage must have a Logical Minimum of 0, a Logical Maximum of 7, a
+Physical Minimum of 0, a Physical Maximum of 315, Units in Degrees, and a
+Report Size of 4. The logical value is defined to be the clockwise rotation
+away from the vertical axis; for example, a logical value of 0 represents no
+rotation and the up button being pressed, while a logical value of 1 represents
+a rotation of 45 degrees and both the up and left keys being pressed.</p>
+
+<p class="table_footnote">4 [<a href="http://developer.android.com/reference/android/view/MotionEvent.html">Resources, 71</a>]</p>
+
+<table>
+ <tr>
+    <th>Analog Controls</strong><sup>1</sup></td>
+    <th>HID Usage</th>
+    <th>Android Button</th>
+ </tr>
+ <tr>
+    <td><a href="http://developer.android.com/reference/android/view/MotionEvent.html#AXIS_LTRIGGER">Left Trigger</a></td>
+    <td>0x02 0x00C5</td>
+    <td>AXIS_LTRIGGER </td>
+ </tr>
+ <tr>
+    <td><a href="http://developer.android.com/reference/android/view/MotionEvent.html#AXIS_THROTTLE">Right Trigger</a></td>
+    <td>0x02 0x00C4</td>
+    <td>AXIS_RTRIGGER </td>
+ </tr>
+ <tr>
+    <td><a href="http://developer.android.com/reference/android/view/MotionEvent.html#AXIS_Y">Left Joystick</a></td>
+    <td>0x01 0x0030</p>
+
+<p>0x01 0x0031</td>
+    <td>AXIS_X</p>
+
+<p>AXIS_Y</td>
+ </tr>
+ <tr>
+    <td><a href="http://developer.android.com/reference/android/view/MotionEvent.html#AXIS_Z">Right Joystick</a></td>
+    <td>0x01 0x0032</p>
+
+<p>0x01 0x0035</td>
+    <td>AXIS_Z</p>
+
+<p>AXIS_RZ</td>
+ </tr>
+</table>
+
+
+<p class="table_footnote">1 [<a href="http://developer.android.com/reference/android/view/MotionEvent.html">Resources, 71</a>]</p>
+
+<h3 id="7_2_7_remote_control">7.2.7. Remote Control</h3>
+
+
+<p>Android Television device implementations SHOULD provide a remote control to
+allow users to access the TV interface. The remote control MAY be a physical
+remote or can be a software-based remote that is accessible from a mobile phone
+or tablet. The remote control MUST meet the requirements defined below.</p>
+
+<ul>
+  <li><strong>Search affordance</strong>. Device implementations MUST fire KEYCODE_SEARCH when the user invokes voice search either on the physical or software-based remote.</li>
+  <li><strong>Navigation</strong>. All Android Television remotes MUST include Back, Home, and Select buttons and
+support for D-pad events [<a href="http://developer.android.com/reference/android/view/KeyEvent.html">Resources, 72</a>].</li>
+</ul>
+
+<h2 id="7_3_sensors">7.3. Sensors</h2>
+
+
+<p>Android includes APIs for accessing a variety of sensor types. Devices
+implementations generally MAY omit these sensors, as provided for in the
+following subsections. If a device includes a particular sensor type that has a
+corresponding API for third-party developers, the device implementation MUST
+implement that API as described in the Android SDK documentation and the
+Android Open Source documentation on sensors [<a href="http://source.android.com/devices/sensors/">Resources, 73</a>]. For example, device implementations:</p>
+
+<ul>
+  <li>MUST accurately report the presence or absence of sensors per the
+android.content.pm.PackageManager class [<a href="http://developer.android.com/reference/android/content/pm/PackageManager.html">Resources, 53]</a>.</li>
+  <li>MUST return an accurate list of supported sensors via the
+SensorManager.getSensorList() and similar methods.</li>
+  <li>MUST behave reasonably for all other sensor APIs (for example, by returning
+true or false as appropriate when applications attempt to register listeners,
+not calling sensor listeners when the corresponding sensors are not present;
+etc.).</li>
+  <li>MUST report all sensor measurements using the relevant International System of
+Units (metric) values for each sensor type as defined in the Android SDK
+documentation [<a href="http://developer.android.com/reference/android/hardware/SensorEvent.html">Resources, 74</a>].</li>
+  <li>SHOULD report the event time in nanoseconds as defined in the Android SDK
+documentation, representing the time the event happened and synchronized with
+the SystemClock.elapsedRealtimeNano() clock. Existing and new Android devices
+are <strong>very strongly encouraged</strong> to meet these requirement so they will be able to upgrade to the future
+platform releases where this might become a REQUIRED component. The
+synchronization error SHOULD be below 100 milliseconds [<a href="http://developer.android.com/reference/android/hardware/SensorEvent.html#timestamp">Resources, 75</a>].</li>
+</ul>
+
+<p>The list above is not comprehensive; the documented behavior of the Android SDK
+and the Android Open Source Documentations on Sensors [<a href="http://source.android.com/devices/sensors/">Resources, 73</a>] is to be considered authoritative.</p>
+
+<p>Some sensor types are composite, meaning they can be derived from data provided
+by one or more other sensors. (Examples include the orientation sensor, and the
+linear acceleration sensor.) Device implementations SHOULD implement these
+sensor types, when they include the prerequisite physical sensors as described
+in [<a href="https://source.android.com/devices/sensors/sensor-types.html">Resources, 76</a>].
+If a device implementation includes a composite sensor it MUST implement the
+sensor as described in the Android Open Source documentation on composite
+sensors [<a href="https://source.android.com/devices/sensors/sensor-types.html#composite_sensor_type_summary">Resources, 76</a>].</p>
+
+<p>Some Android sensors support a &ldquo;continuous&rdquo; trigger mode, which returns data
+continuously [<a href="https://source.android.com/devices/sensors/report-modes.html#continuous">Resources, 77</a>]. For any API indicated by the Android SDK documentation to be a continuous
+sensor, device implementations MUST continuously provide periodic data samples
+that SHOULD have a jitter below 3%, where jitter is defined as the standard
+deviation of the difference of the reported timestamp values between
+consecutive events.</p>
+
+<p>Note that the device implementations MUST ensure that the sensor event stream
+MUST NOT prevent the device CPU from entering a suspend state or waking up from
+a suspend state.</p>
+
+<p>Finally, when several sensors are activated, the power consumption SHOULD NOT
+exceed the sum of the individual sensor&rsquo;s reported power consumption.</p>
+
+<h3 id="7_3_1_accelerometer">7.3.1. Accelerometer</h3>
+
+
+<p>Device implementations SHOULD include a 3-axis accelerometer. Android Handheld
+devices and Android Watch devices are strongly encouraged to include this
+sensor. If a device implementation does include a 3-axis accelerometer, it:</p>
+
+<ul>
+  <li>MUST implement and report TYPE_ACCELEROMETER sensor [<a href="http://developer.android.com/reference/android/hardware/Sensor.html#TYPE_ACCELEROMETER">Resources, 78</a>].</li>
+  <li>MUST be able to report events up to a frequency of at least 50 Hz for
+  Android Watch devices as such devices have a stricter power constraint and
+  100 Hz for all other device types.</li>
+  <li>SHOULD report events up to at least 200 Hz.</li>
+  <li>MUST comply with the Android sensor coordinate system as detailed in the
+Android APIs [<a href="http://developer.android.com/reference/android/hardware/SensorEvent.html">Resources, 74</a>].</li>
+  <li>MUST be capable of measuring from freefall up to four times the gravity (4g) or
+more on any axis.</li>
+  <li>MUST have a resolution of at least 8-bits and SHOULD have a resolution of at
+least 16-bits.</li>
+  <li>SHOULD be calibrated while in use if the characteristics changes over the life
+cycle and compensated, and preserve the compensation parameters between device
+reboots.</li>
+  <li>SHOULD be temperature compensated.</li>
+  <li>MUST have a standard deviation no greater than 0.05 m/s^, where the standard
+deviation should be calculated on a per axis basis on samples collected over a
+period of at least 3 seconds at the fastest sampling rate.</li>
+  <li>SHOULD implement the TYPE_SIGNIFICANT_MOTION, TYPE_TILT_DETECTOR,
+TYPE_STEP_DETECTOR, TYPE_STEP_COUNTER composite sensors as described in the
+Android SDK document. Existing and new Android devices are <strong>very strongly encouraged</strong> to implement the TYPE_SIGNIFICANT_MOTION composite sensor. If any of these
+sensors are implemented, the sum of their power consumption MUST always be less
+than 4 mW and SHOULD each be below 2 mW and 0.5 mW for when the device is in a
+dynamic or static condition.</li>
+  <li>If a gyroscope sensor is included, MUST implement the TYPE_GRAVITY and
+TYPE_LINEAR_ACCELERATION composite sensors and SHOULD implement the
+TYPE_GAME_ROTATION_VECTOR composite sensor. Existing and new Android devices
+are strongly encouraged to implement the TYPE_GAME_ROTATION_VECTOR sensor.</li>
+  <li>SHOULD implement a TYPE_ROTATION_VECTOR composite sensor, if a gyroscope sensor
+and a magnetometer sensor is also included.</li>
+</ul>
+
+<h3 id="7_3_2_magnetometer">7.3.2. Magnetometer</h3>
+
+
+<p>Device implementations SHOULD include a 3-axis magnetometer (compass). If a
+device does include a 3-axis magnetometer, it:</p>
+
+<ul>
+  <li>MUST implement the TYPE_MAGNETIC_FIELD sensor and SHOULD also implement
+TYPE_MAGNETIC_FIELD_UNCALIBRATED sensor. Existing and new Android devices are
+strongly encouraged to implement the TYPE_MAGNETIC_FIELD_UNCALIBRATED sensor.</li>
+  <li>MUST be able to report events up to a frequency of at least 10 Hz and SHOULD
+report events up to at least 50 Hz.</li>
+  <li>MUST comply with the Android sensor coordinate system as detailed in the
+Android APIs [<a href="http://developer.android.com/reference/android/hardware/SensorEvent.html">Resources, 74</a>].</li>
+  <li>MUST be capable of measuring between -900 &micro;T and +900 &micro;T on each axis before
+saturating.</li>
+  <li>MUST have a hard iron offset value less than 700 &micro;T and SHOULD have a value
+below 200 &micro;T, by placing the magnetometer far from dynamic (current-induced)
+and static (magnet-induced) magnetic fields.</li>
+  <li>MUST have a resolution equal or denser than 0.6 &micro;T and SHOULD have a resolution
+equal or denser than 0.2 &micro;.</li>
+  <li>SHOULD be temperature compensated.</li>
+  <li>MUST support online calibration and compensation of the hard iron bias, and
+preserve the compensation parameters between device reboots.</li>
+  <li>MUST have the soft iron compensation applied&mdash;the calibration can be done either
+while in use or during the production of the device.</li>
+  <li>SHOULD have a standard deviation, calculated on a per axis basis on samples
+collected over a period of at least 3 seconds at the fastest sampling rate, no
+greater than 0.5 &micro;T.</li>
+  <li>SHOULD implement a TYPE_ROTATION_VECTOR composite sensor, if an accelerometer
+sensor and a gyroscope sensor is also included.</li>
+  <li>MAY implement the TYPE_GEOMAGNETIC_ROTATION_VECTOR sensor if an accelerometer
+sensor is also implemented. However if implemented, it MUST consume less than
+10 mW and SHOULD consume less than 3 mW when the sensor is registered for batch
+mode at 10 Hz.</li>
+</ul>
+
+<h3 id="7_3_3_gps">7.3.3. GPS</h3>
+
+
+<p>Device implementations SHOULD include a GPS receiver. If a device
+implementation does include a GPS receiver, it SHOULD include some form of&ldquo;assisted GPS&rdquo; technique to minimize GPS lock-on time.</p>
+
+<h3 id="7_3_4_gyroscope">7.3.4. Gyroscope</h3>
+
+
+<p>Device implementations SHOULD include a gyroscope (angular change sensor).
+Devices SHOULD NOT include a gyroscope sensor unless a 3-axis accelerometer is
+also included. If a device implementation includes a gyroscope, it:</p>
+
+<ul>
+  <li>MUST implement the TYPE_GYROSCOPE sensor and SHOULD also implement
+TYPE_GYROSCOPE_UNCALIBRATED sensor. Existing and new Android devices are
+strongly encouraged to implement the SENSOR_TYPE_GYROSCOPE_UNCALIBRATED sensor.</li>
+  <li>MUST be capable of measuring orientation changes up to 1,000 degrees per second.</li>
+  <li>MUST be able to report events up to a frequency of at least 50 Hz for
+  Android Watch devices as such devices have a stricter power constraint and 
+  100 Hz for all other device types.</li>
+  <li>SHOULD report events up to at least 200 Hz.</li>
+  <li>MUST have a resolution of 12-bits or more and SHOULD have a resolution of
+16-bits or more.</li>
+  <li>MUST be temperature compensated.</li>
+  <li>MUST be calibrated and compensated while in use, and preserve the compensation
+parameters between device reboots.</li>
+  <li>MUST have a variance no greater than 1e-7 rad^2 / s^2 per Hz (variance per Hz,
+or rad^2 / s). The variance is allowed to vary with the sampling rate, but must
+be constrained by this value. In other words, if you measure the variance of
+the gyro at 1 Hz sampling rate it should be no greater than 1e-7 rad^2/s^2.</li>
+  <li>SHOULD implement a TYPE_ROTATION_VECTOR composite sensor, if an accelerometer
+sensor and a magnetometer sensor is also included.</li>
+  <li>If an accelerometer sensor is included, MUST implement the TYPE_GRAVITY and
+TYPE_LINEAR_ACCELERATION composite sensors and SHOULD implement the
+TYPE_GAME_ROTATION_VECTOR composite sensor. Existing and new Android devices
+are strongly encouraged to implement the TYPE_GAME_ROTATION_VECTOR sensor.</li>
+</ul>
+
+<h3 id="7_3_5_barometer">7.3.5. Barometer</h3>
+
+
+<p>Device implementations SHOULD include a barometer (ambient air pressure
+sensor). If a device implementation includes a barometer, it:</p>
+
+<ul>
+  <li>MUST implement and report TYPE_PRESSURE sensor.</li>
+  <li>MUST be able to deliver events at 5 Hz or greater.</li>
+  <li>MUST have adequate precision to enable estimating altitude.</li>
+  <li>MUST be temperature compensated.</li>
+</ul>
+
+<h3 id="7_3_6_thermometer">7.3.6. Thermometer</h3>
+
+
+<p>Device implementations MAY include an ambient thermometer (temperature sensor).
+If present, it MUST be defined as SENSOR_TYPE_AMBIENT_TEMPERATURE and it MUST
+measure the ambient (room) temperature in degrees Celsius.</p>
+
+<p>Device implementations MAY but SHOULD NOT include a CPU temperature sensor. If
+present, it MUST be defined as SENSOR_TYPE_TEMPERATURE, it MUST measure the
+temperature of the device CPU, and it MUST NOT measure any other temperature.
+Note the SENSOR_TYPE_TEMPERATURE sensor type was deprecated in Android 4.0.</p>
+
+<h3 id="7_3_7_photometer">7.3.7. Photometer</h3>
+
+
+<p>Device implementations MAY include a photometer (ambient light sensor).</p>
+
+<h3 id="7_3_8_proximity_sensor">7.3.8. Proximity Sensor</h3>
+
+
+<p>Device implementations MAY include a proximity sensor. Devices that can make a
+voice call and indicate any value other than PHONE_TYPE_NONE in getPhoneType
+SHOULD include a proximity sensor. If a device implementation does include a
+proximity sensor, it:</p>
+
+<ul>
+  <li>MUST measure the proximity of an object in the same direction as the screen.
+That is, the proximity sensor MUST be oriented to detect objects close to the
+screen, as the primary intent of this sensor type is to detect a phone in use
+by the user. If a device implementation includes a proximity sensor with any
+other orientation, it MUST NOT be accessible through this API.</li>
+  <li>MUST have 1-bit of accuracy or more.</li>
+</ul>
+
+<h2 id="7_4_data_connectivity">7.4. Data Connectivity</h2>
+
+
+<h3 id="7_4_1_telephony">7.4.1. Telephony</h3>
+
+
+<p>&ldquo;Telephony&rdquo; as used by the Android APIs and this document refers specifically
+to hardware related to placing voice calls and sending SMS messages via a GSM
+or CDMA network. While these voice calls may or may not be packet-switched,
+they are for the purposes of Android considered independent of any data
+connectivity that may be implemented using the same network. In other words,
+the Android &ldquo;telephony&rdquo; functionality and APIs refer specifically to voice
+calls and SMS. For instance, device implementations that cannot place calls or
+send/receive SMS messages MUST NOT report the android.hardware.telephony
+feature or any subfeatures, regardless of whether they use a cellular network
+for data connectivity.</p>
+
+<p>Android MAY be used on devices that do not include telephony hardware. That is,
+Android is compatible with devices that are not phones. However, if a device
+implementation does include GSM or CDMA telephony, it MUST implement full
+support for the API for that technology. Device implementations that do not
+include telephony hardware MUST implement the full APIs as no-ops.</p>
+
+<h3 id="7_4_2_ieee_802_11_wi-fi">7.4.2. IEEE 802.11 (Wi-Fi)</h3>
+
+<div class="note">
+<p>Android Television device implementations MUST include Wi-Fi support.</p>
+</div>
+
+
+<p>Android Television device implementations MUST include support for one or more
+forms of 802.11 (b/g/a/n, etc.) and other types of Android device
+implementation SHOULD include support for one or more forms of 802.11. If a
+device implementation does include support for 802.11 and exposes the
+functionality to a third-party application, it MUST implement the corresponding
+Android API and:</p>
+
+<ul>
+  <li>MUST report the hardware feature flag android.hardware.wifi.</li>
+  <li>MUST implement the multicast API as described in the SDK documentation [<a href="http://developer.android.com/reference/android/net/wifi/WifiManager.MulticastLock.html">Resources, 79</a>].</li>
+  <li>MUST support multicast DNS (mDNS) and MUST NOT filter mDNS packets
+(224.0.0.251) at any time of operation including when the screen is not in an
+active state.</li>
+</ul>
+
+<h4 id="7_4_2_1_wi-fi_direct">7.4.2.1. Wi-Fi Direct</h4>
+
+
+<p>Device implementations SHOULD include support for Wi-Fi Direct (Wi-Fi
+peer-to-peer). If a device implementation does include support for Wi-Fi
+Direct, it MUST implement the corresponding Android API as described in the SDK
+documentation [<a href="http://developer.android.com/reference/android/net/wifi/p2p/WifiP2pManager.html">Resources, 80</a>]. If a device implementation includes support for Wi-Fi Direct, then it:</p>
+
+<ul>
+  <li>MUST report the hardware feature android.hardware.wifi.direct.</li>
+  <li>MUST support regular Wi-Fi operation.</li>
+  <li>SHOULD support concurrent Wi-Fi and Wi-Fi Direct operation.</li>
+</ul>
+
+<h4 id="7_4_2_2_wi-fi_tunneled_direct_link_setup">7.4.2.2. Wi-Fi Tunneled Direct Link Setup</h4>
+
+<div class="note">
+<p>Android Television device implementations MUST include support for Wi-Fi
+Tunneled Direct Link Setup (TDLS).</p>
+</div>
+
+
+<p>Android Television device implementations MUST include support for Wi-Fi
+Tunneled Direct Link Setup (TDLS) and other types of Android device
+implementations SHOULD include support for Wi-Fi TDLS as described in the
+Android SDK Documentation [<a href="http://developer.android.com/reference/android/net/wifi/WifiManager.html">Resources, 81</a>]. If a device implementation does include support for TDLS and TDLS is enabled
+by the WiFiManager API, the device:</p>
+
+<ul>
+  <li>SHOULD use TDLS only when it is possible AND beneficial.</li>
+  <li>SHOULD have some heuristic and NOT use TDLS when its performance might be worse
+than going through the Wi-Fi access point.</li>
+</ul>
+
+<h3 id="7_4_3_bluetooth">7.4.3. Bluetooth</h3>
+
+<div class="note">
+<p>Android Watch and Automotive implementations MUST support Bluetooth. Android
+Television implementations MUST support Bluetooth and Bluetooth LE.</p>
+</div>
+
+
+<p>Android includes support for Bluetooth and Bluetooth Low Energy [<a href="http://developer.android.com/reference/android/bluetooth/package-summary.html">Resources, 82</a>]. Device implementations that include support for Bluetooth and Bluetooth Low
+Energy MUST declare the relevant platform features (android.hardware.bluetooth
+and android.hardware.bluetooth_le respectively) and implement the platform
+APIs. Device implementations SHOULD implement relevant Bluetooth profiles such
+as A2DP, AVCP, OBEX, etc. as appropriate for the device. Android Television
+device implementations MUST support Bluetooth and Bluetooth LE. </p>
+
+<p>Device implementations including support for Bluetooth Low Energy:</p>
+
+<ul>
+  <li>MUST declare the hardware feature android.hardware.bluetooth_le.</li>
+  <li>MUST enable the GATT (generic attribute profile) based Bluetooth APIs as
+described in the SDK documentation and [<a href="http://developer.android.com/reference/android/bluetooth/package-summary.html">Resources, 82</a>].</li>
+  <li>SHOULD support offloading of the filtering logic to the bluetooth chipset when
+implementing the ScanFilter API [<a href="https://developer.android.com/reference/android/bluetooth/le/ScanFilter.html">Resources, 83</a>], and MUST report the correct value of where the filtering logic is implemented whenever queried via the
+android.bluetooth.BluetoothAdapter.isOffloadedFilteringSupported() method.</li>
+  <li>SHOULD support offloading of the batched scanning to the bluetooth chipset, but
+if not supported, MUST report &lsquo;false&rsquo; whenever queried via the
+android.bluetooth.BluetoothAdapater.isOffloadedScanBatchingSupported() method.</li>
+  <li>SHOULD support multi advertisement with at least 4 slots, but if not supported,
+MUST report &lsquo;false&rsquo; whenever queried via the
+android.bluetooth.BluetoothAdapter.isMultipleAdvertisementSupported() method.</li>
+</ul>
+
+<h3 id="7_4_4_near-field_communications">7.4.4. Near-Field Communications</h3>
+
+
+<p>Device implementations SHOULD include a transceiver and related hardware for
+Near-Field Communications (NFC). If a device implementation does include NFC
+hardware and plans to make it available to third-party apps, then it:</p>
+
+<ul>
+  <li>MUST report the android.hardware.nfc feature from the
+android.content.pm.PackageManager.hasSystemFeature() method [<a href="http://developer.android.com/reference/android/content/pm/PackageManager.html">Resources, 53</a>].</li>
+  <li>MUST be capable of reading and writing NDEF messages via the following NFC
+standards:
+  <ul>
+    <li>MUST be capable of acting as an NFC Forum reader/writer (as defined by the NFC
+Forum technical specification NFCForum-TS-DigitalProtocol-1.0) via the
+following NFC standards:
+    <ul>
+      <li>NfcA (ISO14443-3A)</li>
+      <li>NfcB (ISO14443-3B)</li>
+      <li>NfcF (JIS 6319-4)</li>
+      <li>IsoDep (ISO 14443-4)</li>
+      <li>NFC Forum Tag Types 1, 2, 3, 4 (defined by the NFC Forum)</li>
+    </ul>
+  <li>SHOULD be capable of reading and writing NDEF messages via the following NFC
+standards. Note that while the NFC standards below are stated as SHOULD, the
+Compatibility Definition for a future version is planned to change these to
+MUST. These standards are optional in this version but will be required in
+future versions. Existing and new devices that run this version of Android are <strong>very strongly encouraged</strong> to meet these requirements now so they will be able to upgrade to the future platform releases.</li>
+  <ul>
+    <li>NfcV (ISO 15693)</li>
+  </ul></li>
+  <li>MUST be capable of transmitting and receiving data via the following
+peer-to-peer standards and protocols:
+  <ul>
+    <li>ISO 18092</li>
+    <li>LLCP 1.0 (defined by the NFC Forum)</li>
+    <li>SDP 1.0 (defined by the NFC Forum)</li>
+    <li>NDEF Push Protocol [<a href="http://static.googleusercontent.com/media/source.android.com/en/us/compatibility/ndef-push-protocol.pdf">Resources, 84</a>]</li>
+    <li>SNEP 1.0 (defined by the NFC Forum)</li>
+  </ul></li>
+  <li>MUST include support for Android Beam [<a href="http://developer.android.com/guide/topics/connectivity/nfc/nfc.html">Resources, 85</a>]:
+  <ul>
+    <li>MUST implement the SNEP default server. Valid NDEF messages received by the
+default SNEP server MUST be dispatched to applications using the
+android.nfc.ACTION_NDEF_DISCOVERED intent. Disabling Android Beam in settings
+MUST NOT disable dispatch of incoming NDEF message.</li>
+    <li>MUST honor the android.settings.NFCSHARING_SETTINGS intent to show NFC sharing
+settings [<a href="http://developer.android.com/reference/android/provider/Settings.html#ACTION_NFCSHARING_SETTINGS">Resources, 86</a>].</li>
+    <li>MUST implement the NPP server. Messages received by the NPP server MUST be
+processed the same way as the SNEP default server.</li>
+    <li>MUST implement a SNEP client and attempt to send outbound P2P NDEF to the
+default SNEP server when Android Beam is enabled. If no default SNEP server is
+found then the client MUST attempt to send to an NPP server.</li>
+    <li>MUST allow foreground activities to set the outbound P2P NDEF message using
+android.nfc.NfcAdapter.setNdefPushMessage, and
+android.nfc.NfcAdapter.setNdefPushMessageCallback, and
+android.nfc.NfcAdapter.enableForegroundNdefPush.</li>
+    <li>SHOULD use a gesture or on-screen confirmation, such as 'Touch to Beam', before
+sending outbound P2P NDEF messages.</li>
+    <li>SHOULD enable Android Beam by default and MUST be able to send and receive
+using Android Beam, even when another proprietary NFC P2p mode is turned on.</li>
+    <li>MUST support NFC Connection handover to Bluetooth when the device supports
+Bluetooth Object Push Profile. Device implementations MUST support connection
+handover to Bluetooth when using android.nfc.NfcAdapter.setBeamPushUris, by
+implementing the &ldquo;Connection Handover version 1.2&rdquo; [<a href="http://members.nfc-forum.org/specs/spec_list/#conn_handover">Resources, 87</a>] and &ldquo;Bluetooth Secure Simple Pairing Using NFC version 1.0&rdquo; [<a href="http://members.nfc-forum.org/apps/group_public/download.php/18688/NFCForum-AD-BTSSP_1_1.pdf">Resources, 88</a>] specs from the NFC Forum. Such an implementation MUST implement the handover
+LLCP service with service name &ldquo;urn:nfc:sn:handover&rdquo; for exchanging the
+handover request/select records over NFC, and it MUST use the Bluetooth Object
+Push Profile for the actual Bluetooth data transfer. For legacy reasons (to
+remain compatible with Android 4.1 devices), the implementation SHOULD still
+accept SNEP GET requests for exchanging the handover request/select records
+over NFC. However an implementation itself SHOULD NOT send SNEP GET requests
+for performing connection handover.</li>
+  </ul></li>
+  <li>MUST poll for all supported technologies while in NFC discovery mode.</li>
+  <li>SHOULD be in NFC discovery mode while the device is awake with the screen
+active and the lock-screen unlocked.</li>
+</ul>
+</ul>
+
+<p>(Note that publicly available links are not available for the JIS, ISO, and NFC
+Forum specifications cited above.)</p>
+
+<p>Android includes support for NFC Host Card Emulation (HCE) mode. If a
+device implementation does include an NFC controller chipset capable of HCE and
+Application ID (AID) routing, then it:</p>
+
+<ul>
+  <li>MUST report the android.hardware.nfc.hce feature constant.</li>
+  <li>MUST support NFC HCE APIs as defined in the Android SDK [<a href="http://developer.android.com/guide/topics/connectivity/nfc/hce.html">Resources, 10</a>].</li>
+</ul>
+
+<p>Additionally, device implementations MAY include reader/writer support for the
+following MIFARE technologies.</p>
+
+<ul>
+  <li>MIFARE Classic</li>
+  <li>MIFARE Ultralight</li>
+  <li>NDEF on MIFARE Classic</li>
+</ul>
+
+<p>Note that Android includes APIs for these MIFARE types. If a device
+implementation supports MIFARE in the reader/writer role, it:</p>
+
+<ul>
+  <li>MUST implement the corresponding Android APIs as documented by the Android SDK.</li>
+  <li>MUST report the feature com.nxp.mifare from the
+android.content.pm.PackageManager.hasSystemFeature() meth<a href="http://developer.android.com/reference/android/content/pm/PackageManager.html">od [Resources, 53]</a>. Note that this is not a standard Android feature and as such does not appear
+as a constant on the PackageManager class.</li>
+  <li>MUST NOT implement the corresponding Android APIs nor report the com.nxp.mifare
+feature unless it also implements general NFC support as described in this
+section.</li>
+</ul>
+
+<p>If a device implementation does not include NFC hardware, it MUST NOT declare
+the android.hardware.nfc feature from the
+android.content.pm.PackageManager.hasSystemFeature() method [<a href="http://developer.android.com/reference/android/content/pm/PackageManager.html">Resources, 53]</a>, and MUST implement the Android NFC API as a no-op.</p>
+
+<p>As the classes android.nfc.NdefMessage and android.nfc.NdefRecord represent a
+protocol-independent data representation format, device implementations MUST
+implement these APIs even if they do not include support for NFC or declare the
+android.hardware.nfc feature.</p>
+
+<h3 id="7_4_5_minimum_network_capability">7.4.5. Minimum Network Capability</h3>
+
+
+<p>Device implementations MUST include support for one or more forms of data
+networking. Specifically, device implementations MUST include support for at
+least one data standard capable of 200Kbit/sec or greater. Examples of
+technologies that satisfy this requirement include EDGE, HSPA, EV-DO, 802.11g,
+Ethernet, Bluetooth PAN, etc.</p>
+
+<p>Device implementations where a physical networking standard (such as Ethernet)
+is the primary data connection SHOULD also include support for at least one
+common wireless data standard, such as 802.11 (Wi-Fi).</p>
+
+<p>Devices MAY implement more than one form of data connectivity.</p>
+
+<h3 id="7_4_6_sync_settings">7.4.6. Sync Settings</h3>
+
+
+<p>Device implementations MUST have the master auto-sync setting on by default so
+that the method getMasterSyncAutomatically() returns &ldquo;true&rdquo; [<a href="http://developer.android.com/reference/android/content/ContentResolver.html">Resources, 89</a>].</p>
+
+<h2 id="7_5_cameras">7.5. Cameras</h2>
+
+
+<p>Device implementations SHOULD include a rear-facing camera and MAY include a
+front-facing camera. A rear-facing camera is a camera located on the side of
+the device opposite the display; that is, it images scenes on the far side of
+the device, like a traditional camera. A front-facing camera is a camera
+located on the same side of the device as the display; that is, a camera
+typically used to image the user, such as for video conferencing and similar
+applications.</p>
+
+<p>If a device implementation includes at least one camera, it SHOULD be possible
+for an application to simultaneously allocate 3 bitmaps equal to the size of
+the images produced by the largest-resolution camera sensor on the device.</p>
+
+<h3 id="7_5_1_rear-facing_camera">7.5.1. Rear-Facing Camera</h3>
+
+
+<p>Device implementations SHOULD include a rear-facing camera. If a device
+implementation includes at least one rear-facing camera, it:</p>
+
+<ul>
+  <li>MUST report the feature flag android.hardware.camera and
+android.hardware.camera.any.</li>
+  <li>MUST have a resolution of at least 2 megapixels.</li>
+  <li>SHOULD have either hardware auto-focus or software auto-focus implemented in
+the camera driver (transparent to application software).</li>
+  <li>MAY have fixed-focus or EDOF (extended depth of field) hardware.</li>
+  <li>MAY include a flash. If the Camera includes a flash, the flash lamp MUST NOT be
+lit while an android.hardware.Camera.PreviewCallback instance has been
+registered on a Camera preview surface, unless the application has explicitly
+enabled the flash by enabling the FLASH_MODE_AUTO or FLASH_MODE_ON attributes
+of a Camera.Parameters object. Note that this constraint does not apply to the
+device&rsquo;s built-in system camera application, but only to third-party
+applications using Camera.PreviewCallback.</li>
+</ul>
+
+<h3 id="7_5_2_front-facing_camera">7.5.2. Front-Facing Camera</h3>
+
+
+<p>Device implementations MAY include a front-facing camera. If a device
+implementation includes at least one front-facing camera, it:</p>
+
+<ul>
+  <li>MUST report the feature flag android.hardware.camera.any and
+android.hardware.camera.front.</li>
+  <li>MUST have a resolution of at least VGA (640x480 pixels).</li>
+  <li>MUST NOT use a front-facing camera as the default for the Camera API. The
+camera API in Android has specific support for front-facing cameras and device
+implementations MUST NOT configure the API to to treat a front-facing camera as
+the default rear-facing camera, even if it is the only camera on the device.</li>
+  <li>MAY include features (such as auto-focus, flash, etc.) available to rear-facing
+cameras as described in <a href="#7_5_1_rear-facing_camera">section 7.5.1</a>.</li>
+  <li>MUST horizontally reflect (i.e. mirror) the stream displayed by an app in a
+CameraPreview, as follows:
+  <ul>
+    <li>If the device implementation is capable of being rotated by user (such as
+automatically via an accelerometer or manually via user input), the camera
+preview MUST be mirrored horizontally relative to the device&rsquo;s current
+orientation.</li>
+    <li>If the current application has explicitly requested that the Camera display be
+rotated via a call to the android.hardware.Camera.setDisplayOrientation()[<a href="http://developer.android.com/reference/android/hardware/Camera.html#setDisplayOrientation(int)">Resources, 90</a>] method, the camera preview MUST be mirrored horizontally relative to the
+orientation specified by the application.</li>
+    <li>Otherwise, the preview MUST be mirrored along the device&rsquo;s default horizontal
+axis.</li>
+  </ul></li>
+  <li>MUST mirror the image displayed by the postview in the same manner as the
+camera preview image stream. If the device implementation does not support
+postview, this requirement obviously does not apply.</li>
+  <li>MUST NOT mirror the final captured still image or video streams returned to
+application callbacks or committed to media storage.</li>
+</ul>
+
+<h3 id="7_5_3_external_camera">7.5.3. External Camera</h3>
+
+
+<p>Device implementations with USB host mode MAY include support for an external
+camera that connects to the USB port. If a device includes support for an
+external camera, it:</p>
+
+<ul>
+  <li>MUST declare the platform feature android.hardware.camera.external and
+android.hardware camera.any.</li>
+  <li>MUST support USB Video Class (UVC 1.0 or higher).</li>
+  <li>MAY support multiple cameras.</li>
+</ul>
+
+<p>Video compression (such as MJPEG) support is RECOMMENDED to enable transfer of
+high-quality unencoded streams (i.e. raw or independently compressed picture
+streams). Camera-based video encoding MAY be supported. If so, a simultaneous
+unencoded/ MJPEG stream (QVGA or greater resolution) MUST be accessible to the
+device implementation.</p>
+
+<h3 id="7_5_4_camera_api_behavior">7.5.4. Camera API Behavior</h3>
+
+
+<p>Android includes two API packages to access the camera, the newer
+android.hardware.camera2 API expose lower-level camera control to the app,
+including efficient zero-copy burst/streaming flows and per-frame controls of
+exposure, gain, white balance gains, color conversion, denoising, sharpening,
+and more.</p>
+
+<p>The older API package, android.hardware.Camera, is marked as deprecated in
+Android 5.0 but as it should still be available for apps to use Android device
+implementations MUST ensure the continued support of the API as described in
+this section and in the Android SDK.</p>
+
+<p>Device implementations MUST implement the following behaviors for the
+camera-related APIs, for all available cameras:</p>
+
+<ul>
+  <li>If an application has never called
+android.hardware.Camera.Parameters.setPreviewFormat(int), then the device MUST
+use android.hardware.PixelFormat.YCbCr_420_SP for preview data provided to
+application callbacks.</li>
+  <li>If an application registers an android.hardware.Camera.PreviewCallback instance
+and the system calls the onPreviewFrame() method when the preview format is
+YCbCr_420_SP, the data in the byte[] passed into onPreviewFrame() must further
+be in the NV21 encoding format. That is, NV21 MUST be the default.</li>
+  <li>For android.hardware.Camera, device implementations MUST support the YV12
+format (as denoted by the android.graphics.ImageFormat.YV12 constant) for
+camera previews for both front- and rear-facing cameras. (The hardware video
+encoder and camera may use any native pixel format, but the device
+implementation MUST support conversion to YV12.)</li>
+  <li>For android.hardware.camera2, device implementations must support the
+android.hardware.ImageFormat.YUV_420_888 and android.hardware.ImageFormat.JPEG
+formats as outputs through the android.media.ImageReader API.</li>
+</ul>
+
+<p>Device implementations MUST still implement the full Camera API included in the
+Android SDK documentation [<a href="http://developer.android.com/reference/android/hardware/Camera.html">Resources, 91</a>], regardless of whether the device includes hardware autofocus or other
+capabilities. For instance, cameras that lack autofocus MUST still call any
+registered android.hardware.Camera.AutoFocusCallback instances (even though
+this has no relevance to a non-autofocus camera.) Note that this does apply to
+front-facing cameras; for instance, even though most front-facing cameras do
+not support autofocus, the API callbacks must still be &ldquo;faked&rdquo; as described.</p>
+
+<p>Device implementations MUST recognize and honor each parameter name defined as
+a constant on the android.hardware.Camera.Parameters class, if the underlying
+hardware supports the feature. If the device hardware does not support a
+feature, the API must behave as documented. Conversely, device implementations
+MUST NOT honor or recognize string constants passed to the
+android.hardware.Camera.setParameters() method other than those documented as
+constants on the android.hardware.Camera.Parameters. That is, device
+implementations MUST support all standard Camera parameters if the hardware
+allows, and MUST NOT support custom Camera parameter types. For instance,
+device implementations that support image capture using high dynamic range
+(HDR) imaging techniques MUST support camera parameter Camera.SCENE_MODE_HDR [<a href="http://developer.android.com/reference/android/hardware/Camera.Parameters.html">Resources, 92</a>].</p>
+
+<p>Because not all device implementations can fully support all the features of
+the android.hardware.camera2 API, device implementations MUST report the proper
+level of support with the android.info.supportedHardwareLevel property as
+described in the Android SDK [<a href="https://developer.android.com/reference/android/hardware/camera2/CameraCharacteristics.html#INFO_SUPPORTED_HARDWARE_LEVEL">Resources, 93]</a> and report the appropriate framework feature flags [<a href="http://source.android.com/devices/camera/versioning.html">Resources, 94]</a>. </p>
+
+<p>Device implementations MUST also declare its Individual camera capabilities of
+android.hardware.camera2 via the android.request.availableCapabilities property
+and declare the appropriate feature flags [<a href="http://source.android.com/devices/camera/versioning.html">Resources, 94]</a>; a device must define the feature flag if any of its attached camera devices supports the feature.</p>
+
+<p>Device implementations MUST broadcast the Camera.ACTION_NEW_PICTURE intent
+whenever a new picture is taken by the camera and the entry of the picture has
+been added to the media store.</p>
+
+<p>Device implementations MUST broadcast the Camera.ACTION_NEW_VIDEO intent
+whenever a new video is recorded by the camera and the entry of the picture has
+been added to the media store.</p>
+
+<h3 id="7_5_5_camera_orientation">7.5.5. Camera Orientation</h3>
+
+
+<p>Both front- and rear-facing cameras, if present, MUST be oriented so that the
+long dimension of the camera aligns with the screen&rsquo;s long dimension. That is,
+when the device is held in the landscape orientation, cameras MUST capture
+images in the landscape orientation. This applies regardless of the device&rsquo;s
+natural orientation; that is, it applies to landscape-primary devices as well
+as portrait-primary devices.</p>
+
+<h2 id="7_6_memory_and_storage">7.6. Memory and Storage</h2>
+
+
+<h3 id="7_6_1_minimum_memory_and_storage">7.6.1. Minimum Memory and Storage</h3>
+
+<div class="note">
+<p>Android Television devices MUST have at least 5GB of non-volatile storage
+available for application private data.</p>
+</div>
+
+
+<p>The memory available to the kernel and userspace on device implementations MUST
+be at least equal or larger than the minimum values specified by the following
+table. (See <a href="#7_1_1_screen_configuration">section 7.1.1</a> for screen size and density definitions.)</p>
+<table>
+ <tr>
+    <th>Density and screen size</th>
+    <th>32-bit device</th>
+    <th>64-bit device</th>
+ </tr>
+ <tr>
+    <td>Android Watch devices (due to smaller screens)</td>
+    <td>416MB</td>
+    <td>Not applicable</td>
+ </tr>
+ <tr>
+    <td><ul>
+    <li class="table_list">280dpi or lower on small/normal screens</li>
+    <li class="table_list">mdpi or lower on large screens</li>
+    <li class="table_list">ldpi or lower on extra large screens</li>
+    </ul></td>
+    <td>424MB</td>
+    <td>704MB</td>
+ </tr>
+ <tr>
+    <td><ul>
+    <li class="table_list">xhdpi or higher on small/normal screens</li>
+    <li class="table_list">hdpi or higher on large screens</li>
+    <li class="table_list">mdpi or higher on extra large screens</li></ul></td>
+    <td>512MB</td>
+    <td>832MB</td>
+ </tr>
+ <tr>
+    <td><ul>
+    <li class="table_list">400dpi or higher on small/normal screens</li>
+    <li class="table_list">xhdpi or higher on large screens</li>
+     <li class="table_list">tvdpi or higher on extra large screens</li></ul></td>
+    <td>896MB</td>
+    <td>1280MB</td>
+ </tr>
+ <tr>
+    <td><ul>
+    <li class="table_list">560dpi or higher on small/normal screens</li>
+    <li class="table_list">400dpi or higher on large screens</li>
+    <li class="table_list">xhdpi or higher on extra large screens</li></ul></td>
+    <td>1344MB</td>
+    <td>1824MB</td>
+ </tr>
+</table>
+
+
+<p>The minimum memory values MUST be in addition to any memory space already
+dedicated to hardware components such as radio, video, and so on that is not
+under the kernel&rsquo;s control.</p>
+
+<p>Device implementations with less than 512MB of memory available to the kernel
+and userspace, unless an Android Watch, MUST return the value "true" for
+ActivityManager.isLowRamDevice().</p>
+
+<p>Android Television devices MUST have at least 5GB and other device
+implementations MUST have at least 1.5GB of non-volatile storage available for
+application private data. That is, the /data partition MUST be at least 5GB for
+Android Television devices and at least 1.5GB for other device implementations.
+Device implementations that run Android are <strong>very strongly encouraged</strong> to have at least 3GB of non-volatile storage for application private data so
+they will be able to upgrade to the future platform releases.</p>
+
+<p>The Android APIs include a Download Manager that applications MAY use to
+download data files [<a href="http://developer.android.com/reference/android/app/DownloadManager.html">Resources, 95</a>]. The device implementation of the Download Manager MUST be capable of
+downloading individual files of at least 100MB in size to the default &ldquo;cache"
+location.</p>
+
+<h3 id="7_6_2_application_shared_storage">7.6.2. Application Shared Storage</h3>
+
+
+<p>Device implementations MUST offer shared storage for applications also often
+referred as &ldquo;shared external storage&rdquo;. </p>
+
+<p>Device implementations MUST be configured with shared storage mounted by
+default, &ldquo;out of the box&rdquo;. If the shared storage is not mounted on the Linux
+path /sdcard, then the device MUST include a Linux symbolic link from /sdcard
+to the actual mount point.</p>
+
+<p>Device implementations MAY have hardware for user-accessible removable storage,
+such as a Secure Digital (SD) card slot. If this slot is used to satisfy the
+shared storage requirement, the device implementation:</p>
+
+<ul>
+  <li>MUST implement a toast or pop-up user interface warning the user when there is
+no SD card.</li>
+  <li>MUST include a FAT-formatted SD card 1GB in size or larger OR show on the box
+and other material available at time of purchase that the SD card has to be
+separately purchased.</li>
+  <li>MUST mount the SD card by default.</li>
+</ul>
+
+<p>Alternatively, device implementations MAY allocate internal (non-removable)
+storage as shared storage for apps as included in the upstream Android Open
+Source Project; device implementations SHOULD use this configuration and
+software implementation. If a device implementation uses internal
+(non-removable) storage to satisfy the shared storage requirement, that storage
+MUST be 1GB in size or larger and mounted on /sdcard (or /sdcard MUST be a
+symbolic link to the physical location if it is mounted elsewhere).</p>
+
+<p>Device implementations MUST enforce as documented the
+android.permission.WRITE_EXTERNAL_STORAGE permission on this shared storage.
+Shared storage MUST otherwise be writable by any application that obtains that
+permission.</p>
+
+<p>Device implementations that include multiple shared storage paths (such as both
+an SD card slot and shared internal storage) MUST NOT allow Android
+applications to write to the secondary external storage, except for their
+package-specific directories on the secondary external storage, but SHOULD
+expose content from both storage paths transparently through Android&rsquo;s media
+scanner service and android.provider.MediaStore.</p>
+
+<p>Regardless of the form of shared storage used, if the device implementation
+has a USB port with USB peripheral mode support, it MUST provide some mechanism
+to access the contents of shared storage from a host computer. Device
+implementations MAY use USB mass storage, but SHOULD use Media Transfer Protocol
+to satisfy this requirement. If the device implementation supports Media
+Transfer Protocol, it:</p>
+
+<ul>
+  <li>SHOULD be compatible with the reference Android MTP host, Android File Transfer
+[<a href="http://www.android.com/filetransfer">Resources, 96</a>].</li>
+  <li>SHOULD report a USB device class of 0x00.</li>
+  <li>SHOULD report a USB interface name of 'MTP'.</li>
+</ul>
+
+<h2 id="7_7_usb">7.7. USB</h2>
+
+
+<p>Device implementations SHOULD support USB peripheral mode and SHOULD support
+USB host mode.</p>
+
+<p>If a device implementation includes a USB port supporting peripheral mode:</p>
+
+<ul>
+  <li>The port MUST be connectable to a USB host that has a standard type-A or type
+-C USB port.</li>
+  <li>The port SHOULD use micro-A, micro-AB or type-C USB form factor. Existing and
+new Android devices are <strong>very strongly encouraged to meet these requirements</strong> so they will be able to upgrade to the future platform releases.</li>
+  <li>The port SHOULD be centered in the middle of an edge. Device implementations
+SHOULD either locate the port on the bottom of the device (according to natural
+orientation) or enable software screen rotation for all apps (including home
+screen), so that the display draws correctly when the device is oriented with
+the port at bottom. Existing and new Android devices are <strong>very strongly encouraged to meet these requirements</strong> so they will be able to upgrade to future platform releases.</li>
+  <li>It MUST allow a USB host connected with the Android device to access the
+contents of the shared storage volume using either USB mass storage or Media
+Transfer Protocol.</li>
+  <li>It SHOULD implement the Android Open Accessory (AOA) API and specification as
+documented in the Android SDK documentation, and if it is an Android Handheld
+device it MUST implement the AOA API. Device implementations implementing the
+AOA specification:
+  <ul>
+    <li>MUST declare support for the hardware feature android.hardware.usb.accessory [<a href="http://developer.android.com/guide/topics/connectivity/usb/accessory.html">Resources, 97</a>].</li>
+    <li>MUST implement the USB audio class as documented in the Android SDK
+documentation [<a href="http://developer.android.com/reference/android/hardware/usb/UsbConstants.html#USB_CLASS_AUDIO">Resources, 98</a>].</li>
+  </ul></li>
+  <li>It SHOULD implement support to draw 1.5 A current during HS chirp and traffic
+as specified in the USB battery charging specification [<a href="http://www.usb.org/developers/docs/devclass_docs/USB_Battery_Charging_1.2.pdf">Resources, 99</a>]. Existing and new Android devices are <strong>very strongly encouraged to meet these requirements</strong> so they will be able to upgrade to the future platform releases.</li>
+  <li>The value of iSerialNumber in USB standard device descriptor MUST be equal to
+the value of android.os.Build.SERIAL.</li>
+</ul>
+
+<p>If a device implementation includes a USB port supporting host mode, it:</p>
+
+<ul>
+  <li>SHOULD use a type-C USB port, if the device implementation supports USB 3.1.</li>
+  <li>MAY use a non-standard port form factor, but if so MUST ship with a cable or
+cables adapting the port to a standard type-A or type-C USB port.</li>
+  <li>MAY use a micro-AB USB port, but if so SHOULD ship with a cable or cables
+adapting the port to a standard type-A or type-C USB port.</li>
+  <li>is <strong>very strongly RECOMMENDED</strong> to implement the USB audio class as documented in the Android SDK
+documentation [<a href="http://developer.android.com/reference/android/hardware/usb/UsbConstants.html#USB_CLASS_AUDIO">Resources, 98</a>].</li>
+  <li>MUST implement the Android USB host API as documented in the Android SDK, and
+MUST declare support for the hardware feature android.hardware.usb.host [<a href="http://developer.android.com/guide/topics/connectivity/usb/host.html">Resources, 100</a>].</li>
+  <li>SHOULD support the Charging Downstream Port output current range of 1.5 A ~ 5 A
+as specified in the USB Battery Charging Specifications [<a href="http://www.usb.org/developers/docs/devclass_docs/USB_Battery_Charging_1.2.pdf">Resources, 99</a>].</li>
+</ul>
+
+<h2 id="7_8_audio">7.8. Audio</h2>
+
+
+<h3 id="7_8_1_microphone">7.8.1. Microphone</h3>
+
+<div class="note">
+<p>Android Handheld, Watch, and Automotive implementations MUST include a
+microphone.</p>
+</div>
+
+
+<p>Device implementations MAY omit a microphone. However, if a device
+implementation omits a microphone, it MUST NOT report the
+android.hardware.microphone feature constant, and MUST implement the audio
+recording API at least as no-ops, per <a href="#7_hardware_compatibility">section 7</a>. Conversely, device implementations that do possess a microphone:</p>
+
+<ul>
+  <li>MUST report the android.hardware.microphone feature constant
+  <li>MUST meet the audio recording requirements in <a href="#5_4_audio_recording">section 5.4</a>
+  <li>MUST meet the audio latency requirements in <a href="#5_6_audio_latency">section 5.6</a>
+</ul>
+
+<h3 id="7_8_2_audio_output">7.8.2. Audio Output</h3>
+
+<div class="note">
+<p>Android Watch devices MAY include an audio output.</p>
+</div>
+
+<p>Device implementations including a speaker or with an audio/multimedia output
+port for an audio output peripheral as a headset or an external speaker:</p>
+
+<ul>
+  <li>MUST report the android.hardware.audio.output feature constant.</li>
+  <li>MUST meet the audio playback requirements in <a href="#5_5_audio_playback">section 5.5</a>.</li>
+  <li>MUST meet the audio latency requirements in <a href="#5_6_audio_latency">section 5.6</a>.</li>
+</ul>
+
+<p>Conversely, if a device implementation does not include a speaker or audio
+output port, it MUST NOT report the android.hardware.audio output feature, and
+MUST implement the Audio Output related APIs as no-ops at least. </p>
+
+<p>Android Watch device implementation MAY but SHOULD NOT have audio output, but
+other types of Android device implementations MUST have an audio output and
+declare android.hardware.audio.output.</p>
+
+<h4 id="7_8_2_1_analog_audio_ports">7.8.2.1. Analog Audio Ports</h4>
+
+
+<p>In order to be compatible with the headsets and other audio accessories using
+the 3.5mm audio plug across the Android ecosystem [<a href="http://source.android.com/accessories/headset-spec.html">Resources, 101</a>], if a device implementation includes one or more analog audio ports, at least
+one of the audio port(s) SHOULD be a 4 conductor 3.5mm audio jack. If a device
+implementation has a 4 conductor 3.5mm audio jack, it:</p>
+
+<ul>
+  <li>MUST support audio playback to stereo headphones and stereo headsets with a
+microphone, and SHOULD support audio recording from stereo headsets with a
+microphone.</li>
+  <li>MUST support TRRS audio plugs with the CTIA pin-out order, and SHOULD support
+audio plugs with the OMTP pin-out order.</li>
+  <li>MUST support the detection of microphone on the plugged in audio accessory, if
+the device implementation supports a microphone, and broadcast the
+android.intent.action.HEADSET_PLUG with the extra value microphone set as 1.</li>
+  <li>SHOULD support the detection and mapping to the keycodes for the following 3
+ranges of equivalent impedance between the microphone and ground conductors on
+the audio plug:
+  <ul>
+    <li><strong>70 ohm or less</strong>: KEYCODE_HEADSETHOOK</li>
+    <li><strong>210&#45;290 Ohm</strong>:<strong> </strong>KEYCODE_VOLUME_UP</li>
+    <li><strong>360&#45;680 Ohm</strong>: KEYCODE_VOLUME_DOWN</li>
+  </ul></li>
+  <li>SHOULD support the detection and mapping to the keycode for the following range
+of equivalent impedance between the microphone and ground conductors on the
+audio plug:
+  <ul>
+    <li><strong>110&#45;180 Ohm: </strong>KEYCODE_VOICE_ASSIST</li>
+  </ul></li>
+  <li>MUST trigger ACTION_HEADSET_PLUG upon a plug insert, but only after all
+contacts on plug are touching their relevant segments on the jack.</li>
+  <li>MUST be capable of driving at least 150mV +/- 10% of output voltage on a 32 Ohm
+speaker impedance.</li>
+  <li>MUST have a microphone bias voltage between 1.8V ~ 2.9V.</li>
+</ul>
+
+<h1 id="8_performance_compatibility">8. Performance Compatibility</h1>
+
+
+<p>Some minimum performance criterias are critical to the user experience and
+impacts the baseline assumptions developers would have when developing an app.
+Android Watch devices SHOULD and other type of device implementations MUST meet
+the following criteria:</p>
+
+<h2 id="8_1_user_experience_consistency">8.1. User Experience Consistency</h2>
+
+
+<p>Device implementations MUST provide a smooth user interface by ensuring a
+consistent frame rate and response times for applications and games. Device
+implementations MUST meet the following requirements: </p>
+
+<ul>
+  <li><strong>Consistent frame latency</strong>. Inconsistent frame latency or a delay to render frames MUST NOT happen more
+often than 5 frames in a second, and SHOULD be below 1 frames in a second.</li>
+  <li><strong>User interface latency</strong>. Device implementations MUST ensure low latency user experience by scrolling a
+list of 10K list entries as defined by the Android Compatibility Test Suite
+(CTS) in less than 36 secs.</li>
+  <li><strong>Task switching</strong>. When multiple applications have been launched, re-launching an already-running
+application after it has been launched MUST take less than 1 second.</li>
+</ul>
+
+<h2 id="8_2_file_i_o_access_performance">8.2. File I/O Access Performance</h2>
+
+
+<p>Device implementations MUST ensure internal storage file access performance consistency for read
+and write operations. </p>
+
+<ul>
+  <li><strong>Sequential write</strong>. Device implementations MUST ensure a sequential write performance of at least 5MB/s
+for a 256MB file using 10MB write buffer.</li>
+  <li><strong>Random write</strong>. Device implementations MUST ensure a random write performance of at least 0.5MB/s for a
+256MB file using 4KB write buffer.</li>
+  <li><strong>Sequential read</strong>. Device implementations MUST ensure a sequential read performance of at least 15MB/s for
+a 256MB file using 10MB write buffer.</li>
+  <li><strong>Random read</strong>. Device implementations MUST ensure a random read performance of at least 3.5MB/s for a
+256MB file using 4KB write buffer.</li>
+</ul>
+
+<h1 id="9_security_model_compatibility">9. Security Model Compatibility</h1>
+
+
+<p>Device implementations MUST implement a security model consistent with the
+Android platform security model as defined in Security and Permissions
+reference document in the APIs [<a href="http://developer.android.com/guide/topics/security/permissions.html">Resources, 102</a>] in the Android developer documentation. Device implementations MUST support
+installation of self-signed applications without requiring any additional
+permissions/certificates from any third parties/authorities. Specifically,
+compatible devices MUST support the security mechanisms described in the follow
+subsections.</p>
+
+<h2 id="9_1_permissions">9.1. Permissions</h2>
+
+
+<p>Device implementations MUST support the Android permissions model as defined in
+the Android developer documentation [<a href="http://developer.android.com/guide/topics/security/permissions.html">Resources, 102</a>]. Specifically, implementations MUST enforce each permission defined as
+described in the SDK documentation; no permissions may be omitted, altered, or
+ignored. Implementations MAY add additional permissions, provided the new
+permission ID strings are not in the android.* namespace.</p>
+
+<h2 id="9_2_uid_and_process_isolation">9.2. UID and Process Isolation</h2>
+
+
+<p>Device implementations MUST support the Android application sandbox model, in
+which each application runs as a unique Unixstyle UID and in a separate
+process. Device implementations MUST support running multiple applications as
+the same Linux user ID, provided that the applications are properly signed and
+constructed, as defined in the Security and Permissions reference [<a href="http://developer.android.com/guide/topics/security/permissions.html">Resources, 102</a>].</p>
+
+<h2 id="9_3_filesystem_permissions">9.3. Filesystem Permissions</h2>
+
+
+<p>Device implementations MUST support the Android file access permissions model
+as defined in the Security and Permissions reference [<a href="http://developer.android.com/guide/topics/security/permissions.html">Resources, 102</a>].</p>
+
+<h2 id="9_4_alternate_execution_environments">9.4. Alternate Execution Environments</h2>
+
+
+<p>Device implementations MAY include runtime environments that execute
+applications using some other software or technology than the Dalvik Executable
+Format or native code. However, such alternate execution environments MUST NOT
+compromise the Android security model or the security of installed Android
+applications, as described in this section.</p>
+
+<p>Alternate runtimes MUST themselves be Android applications, and abide by the
+standard Android security model, as described elsewhere in <a href="#9_security_model_compatibility">section 9</a>.</p>
+
+<p>Alternate runtimes MUST NOT be granted access to resources protected by
+permissions not requested in the runtime&rsquo;s AndroidManifest.xml file via the
+&lt;uses-permission&gt; mechanism.</p>
+
+<p>Alternate runtimes MUST NOT permit applications to make use of features
+protected by Android permissions restricted to system applications.</p>
+
+<p>Alternate runtimes MUST abide by the Android sandbox model. Specifically,
+alternate runtimes:</p>
+
+<ul>
+  <li>SHOULD install apps via the PackageManager into separate Android sandboxes (
+Linux user IDs, etc.).</li>
+  <li>MAY provide a single Android sandbox shared by all applications using the
+alternate runtime.</li>
+  <li>and installed applications using an alternate runtime, MUST NOT reuse the
+sandbox of any other app installed on the device, except through the standard
+Android mechanisms of shared user ID and signing certificate.</li>
+  <li>MUST NOT launch with, grant, or be granted access to the sandboxes
+corresponding to other Android applications.</li>
+  <li>MUST NOT be launched with, be granted, or grant to other applications any
+privileges of the superuser (root), or of any other user ID.</li>
+</ul>
+
+<p>The .apk files of alternate runtimes MAY be included in the system image of a
+device implementation, but MUST be signed with a key distinct from the key used
+to sign other applications included with the device implementation.</p>
+
+<p>When installing applications, alternate runtimes MUST obtain user consent for
+the Android permissions used by the application. If an application needs to
+make use of a device resource for which there is a corresponding Android
+permission (such as Camera, GPS, etc.), the alternate runtime MUST inform the
+user that the application will be able to access that resource. If the runtime
+environment does not record application capabilities in this manner, the
+runtime environment MUST list all permissions held by the runtime itself when
+installing any application using that runtime.</p>
+
+<h2 id="9_5_multi-user_support">9.5. Multi-User Support</h2>
+
+<div class="note">
+<p>This feature is optional for all device types.</p>
+</div>
+
+
+<p>Android includes support for multiple users and provides support for full user
+isolation [<a href="http://developer.android.com/reference/android/os/UserManager.html">Resources, 103]</a>. Device implementations MAY enable multiple users, but when enabled MUST meet
+the following requirements related to multi-user support [<a href="http://source.android.com/devices/storage/">Resources, 104</a>]:</p>
+
+<ul>
+  <li>Device implementations that do not declare the android.hardware.telephony
+feature flag MUST support restricted profiles, a feature that allows device
+owners to manage additional users and their capabilities on the device. With
+restricted profiles, device owners can quickly set up separate environments for
+additional users to work in, with the ability to manage finer-grained
+restrictions in the apps that are available in those environments.</li>
+  <li>Conversely device implementations that declare the android.hardware.telephony
+feature flag MUST NOT support restricted profiles but MUST align with the AOSP
+implementation of controls to enable /disable other users from accessing the
+voice calls and SMS.</li>
+  <li>Device implementations MUST, for each user, implement a security model
+consistent with the Android platform security model as defined in Security and
+Permissions reference document in the APIs [<a href="http://developer.android.com/guide/topics/security/permissions.html">Resources, 102</a>].</li>
+  <li>Device implementations MAY support creating users and managed profiles via the
+android.app.admin.DevicePolicyManager APIs, and if supported, MUST declare the
+platform feature flag android.software.managed_users.
+  <li>Device implementations that declare the feature flag
+android.software.managed_users MUST use the upstream AOSP icon badge to
+represent the managed applications and other badge UI elements like Recents &
+Notifications.</li>
+  <li>Each user instance on an Android device MUST have separate and isolated
+external storage directories. Device implementations MAY store multiple users'
+data on the same volume or filesystem. However, the device implementation MUST
+ensure that applications owned by and running on behalf a given user cannot
+list, read, or write to data owned by any other user. Note that removable
+media, such as SD card slots, can allow one user to access another&rsquo;s data by
+means of a host PC. For this reason, device implementations that use removable
+media for the external storage APIs MUST encrypt the contents of the SD card if
+multiuser is enabled using a key stored only on non-removable media accessible
+only to the system. As this will make the media unreadable by a host PC, device
+implementations will be required to switch to MTP or a similar system to
+provide host PCs with access to the current user&rsquo;s data. Accordingly, device
+implementations MAY but SHOULD NOT enable multi-user if they use removable
+media [<a href="http://developer.android.com/reference/android/os/Environment.html">Resources, 105</a>] for primary external storage.</li>
+</ul>
+
+<h2 id="9_6_premium_sms_warning">9.6. Premium SMS Warning</h2>
+
+
+<p>Android includes support for warning users of any outgoing premium SMS message
+[<a href="http://en.wikipedia.org/wiki/Short_code">Resources, 106</a>] . Premium SMS messages are text messages sent to a service registered with a
+carrier that may incur a charge to the user. Device implementations that
+declare support for android.hardware.telephony MUST warn users before sending a
+SMS message to numbers identified by regular expressions defined in
+/data/misc/sms/codes.xml file in the device. The upstream Android Open Source
+Project provides an implementation that satisfies this requirement.</p>
+
+<h2 id="9_7_kernel_security_features">9.7. Kernel Security Features</h2>
+
+
+<p>The Android Sandbox includes features that can use the Security-Enhanced Linux
+(SELinux) mandatory access control (MAC) system and other security features in
+the Linux kernel. SELinux or any other security features, if implemented below
+the Android framework:</p>
+
+<ul>
+  <li>MUST maintain compatibility with existing applications.</li>
+  <li>MUST NOT have a visible user interface when a security violation is detected
+and successfully blocked, but MAY have a visible user interface when an
+unblocked security violation occurs resulting in a successful exploit.</li>
+  <li>SHOULD NOT be user or developer configurable.</li>
+</ul>
+
+<p>If any API for configuration of policy is exposed to an application that can
+affect another application (such as a Device Administration API), the API MUST
+NOT allow configurations that break compatibility.</p>
+
+<p>Devices MUST implement SELinux or an equivalent mandatory access control system
+if using a kernel other than Linux and meet the following requirements, which
+are satisfied by the reference implementation in the upstream Android Open
+Source Project.</p>
+
+<p>Device implementations:</p>
+
+<ul>
+  <li>MUST support a SELinux policy that allows the SELinux mode to be set on a
+per-domain basis, and MUST configure all domains in enforcing mode. No
+permissive mode domains are allowed, including domains specific to a
+device/vendor.</li>
+  <li>SHOULD load policy from /sepolicy file on the device.</li>
+  <li>MUST NOT modify, omit, or replace the neverallow rules present within the
+sepolicy file provided in the upstream Android Open Source Project (AOSP) and
+the policy MUST compile with all neverallow present, for both AOSP SELinux
+domains as well as device/vendor specific domains.</li>
+  <li>MUST support dynamic updates of the SELinux policy file without requiring a
+system image update.</li>
+</ul>
+
+<p>Device implementations SHOULD retain the default SELinux policy provided in the
+upstream Android Open Source Project, until they have first audited their
+additions to the SELinux policy. Device implementations MUST be compatible with
+the upstream Android Open Source Project.</p>
+
+<h2 id="9_8_privacy">9.8. Privacy</h2>
+
+<p>If the device implements functionality in the system that captures the contents
+displayed on the screen and/or records the audio stream played on the device,
+it MUST continuously notify the user whenever this functionality is enabled and
+actively capturing/recording.</p>
+
+<p>If a device implementation has a mechanism that routes network data traffic
+through a proxy server or VPN gateway by default (for example, preloading a VPN
+service with android.permission.CONTROL_VPN granted), the device implementation
+MUST ask for the user's consent before enabling that mechanism.</p>
+
+<h2 id="9_9_full-disk_encryption">9.9. Full-Disk Encryption</h2>
+
+<div class="note">
+<p>Optional for Android device implementations without a lock screen.</p>
+</div>
+
+
+<p>If the device implementation supports a lock screen with PIN (numeric) or
+PASSWORD (alphanumeric), the device MUST support full-disk encryption of the
+application private data (/data partition), as well
+as the SD card partition if it is a permanent, non-removable part of the device
+[<a href="http://source.android.com/devices/tech/security/encryption/index.html">Resources, 107</a>]. For devices supporting full-disk encryption, the full-disk encryption SHOULD
+be enabled all the time after the user has completed the out-of-box experience.
+While this requirement is stated as SHOULD for this version of the Android
+platform, it is <strong>very strongly RECOMMENDED</strong> as we expect this to change to MUST in the future versions of Android.
+Encryption MUST use AES with a key of 128-bits (or greater) and a mode designed
+for storage (for example, AES-XTS, AES-CBC-ESSIV). The encryption key MUST NOT
+be written to storage at any time without being encrypted. Other than when in
+active use, the encryption key SHOULD be AES encrypted with the lockscreen
+passcode stretched using a slow stretching algorithm (e.g. PBKDF2 or scrypt).
+If the user has not specified a lockscreen passcode or has disabled use of the
+passcode for encryption, the system SHOULD use a default passcode to wrap the
+encryption key. If the device provides a hardware-backed keystore, the password
+stretching algorithm MUST be cryptographically bound to that keystore. The
+encryption key MUST NOT be sent off the device (even when wrapped with the user
+passcode and/or hardware bound key). The upstream Android Open Source project
+provides a preferred implementation of this feature based on the linux kernel
+feature dm-crypt.</p>
+
+<h2 id="9_10_verified_boot">9.10. Verified Boot</h2>
+
+<p>
+Verified boot is a feature that guarantees the integrity of the device software.
+If a device implementation supports the feature, it MUST:
+<ul>
+<li>Declare the platform feature flag android.software.verified_boot</li>
+<li>Perform verification on every boot sequence</li>
+<li>Start verification from a hardware key that is the root of trust, and go
+all the way up to the system partition</li>
+<li>Implement each stage of verification to check the integrity and authenticity
+of all the bytes in the next stage before executing the code in the next stage</li>
+<li>Use verification algorithms as strong as current recommendations
+from NIST for hashing algorithms (SHA-256) and public key sizes (RSA-2048)</li>
+</ul>
+</p>
+
+<p>Device implementations SHOULD support verified boot for device integrity.
+While this requirement is SHOULD for this version of the Android platform,
+it is <strong>strongly RECOMMENDED</strong> as we expect this to change to MUST
+in future versions of Android. The upstream Android Open Source Project provides
+a preferred implementation of this feature based on the linux kernel feature dm-verity.
+</p>
+
+<h1 id="10_software_compatibility_testing">10. Software Compatibility Testing</h1>
+
+
+<p>Device implementations MUST pass all tests described in this section.</p>
+
+<p>However, note that no software test package is fully comprehensive. For this
+reason, device implementers are <strong>very strongly encouraged</strong> to make the minimum number of changes as possible to the reference and
+preferred implementation of Android available from the Android Open Source
+Project. This will minimize the risk of introducing bugs that create
+incompatibilities requiring rework and potential device updates.</p>
+
+<h2 id="10_1_compatibility_test_suite">10.1. Compatibility Test Suite</h2>
+
+
+<p>Device implementations MUST pass the Android Compatibility Test Suite (CTS) [<a href="http://source.android.com/compatibility/index.html">Resources, 108</a>] available from the Android Open Source Project, using the final shipping
+software on the device. Additionally, device implementers SHOULD use the
+reference implementation in the Android Open Source tree as much as possible,
+and MUST ensure compatibility in cases of ambiguity in CTS and for any
+reimplementations of parts of the reference source code.</p>
+
+<p>The CTS is designed to be run on an actual device. Like any software, the CTS
+may itself contain bugs. The CTS will be versioned independently of this
+Compatibility Definition, and multiple revisions of the CTS may be released for
+Android ANDROID_VERSION. Device implementations MUST pass the latest CTS version available
+at the time the device software is completed.</p>
+
+<h2 id="10_2_cts_verifier">10.2. CTS Verifier</h2>
+
+
+<p>Device implementations MUST correctly execute all applicable cases in the CTS
+Verifier. The CTS Verifier is included with the Compatibility Test Suite, and
+is intended to be run by a human operator to test functionality that cannot be
+tested by an automated system, such as correct functioning of a camera and
+sensors.</p>
+
+<p>The CTS Verifier has tests for many kinds of hardware, including some hardware
+that is optional. Device implementations MUST pass all tests for hardware that
+they possess; for instance, if a device possesses an accelerometer, it MUST
+correctly execute the Accelerometer test case in the CTS Verifier. Test cases
+for features noted as optional by this Compatibility Definition Document MAY be
+skipped or omitted.</p>
+
+<p>Every device and every build MUST correctly run the CTS Verifier, as noted
+above. However, since many builds are very similar, device implementers are not
+expected to explicitly run the CTS Verifier on builds that differ only in
+trivial ways. Specifically, device implementations that differ from an
+implementation that has passed the CTS Verifier only by the set of included
+locales, branding, etc. MAY omit the CTS Verifier test.</p>
+
+<h1 id="11_updatable_software">11. Updatable Software</h1>
+
+
+<p>Device implementations MUST include a mechanism to replace the entirety of the
+system software. The mechanism need not perform &ldquo;live&rdquo; upgrades&mdash;that is, a
+device restart MAY be required.</p>
+
+<p>Any method can be used, provided that it can replace the entirety of the
+software preinstalled on the device. For instance, any of the following
+approaches will satisfy this requirement:</p>
+
+<ul>
+  <li>&ldquo;Over-the-air (OTA)&rdquo; downloads with offline update via reboot</li>
+  <li>&ldquo;Tethered&rdquo; updates over USB from a host PC</li>
+  <li>&ldquo;Offline&rdquo; updates via a reboot and update from a file on removable storage</li>
+</ul>
+
+<p>However, if the device implementation includes support for an unmetered data
+connection such as 802.11 or Bluetooth PAN (Personal Area Network) profile:</p>
+
+<ul>
+<li>Android Automotive implementations SHOULD support OTA downloads with offline
+update via reboot.</li>
+<li>All other device implementations MUST support OTA downloads with offline
+update via reboot.</li>
+</ul>
+
+<p>The update mechanism used MUST support updates without wiping user data. That
+is, the update mechanism MUST preserve application private data and application
+shared data. Note that the upstream Android software includes an update
+mechanism that satisfies this requirement.</p>
+
+<p>For device implementations that are launching with Android ANDROID_VERSION and later, the
+update mechanism SHOULD support verifying that the system image is binary
+identical to expected result following an OTA. The block-based OTA
+implementation in the upstream Android Open Source Project, added since Android
+5.1, satisfies this requirement.</p>
+
+<p>If an error is found in a device implementation after it has been released but
+within its reasonable product lifetime that is determined in consultation with
+the Android Compatibility Team to affect the compatibility of third-party
+applications, the device implementer MUST correct the error via a software
+update available that can be applied per the mechanism just described.</p>
+
+<h1 id="12_document_changelog">12. Document Changelog</h1>
+
+
+<p>The following table contains a summary of the changes to the Compatibility
+Definition in this release. </p>
+<table>
+ <tr>
+    <th>Section</th>
+    <th>Summary of change</th>
+ </tr>
+ <tr>
+    <td>2. Device Types</td>
+    <td>Added definition for Android automotive implementation.</td>
+ </tr>
+ <tr>
+    <td>2.1 Device Configurations</td>
+    <td>Added column for Android automotive implementation.</td>
+ </tr>
+ <tr>
+    <td>3.3.2. 32-bit ARM Native Code Compatibility</td>
+    <td>New section added.</td>
+ </tr>
+ <tr>
+    <td>3.4.1. WebView Compatibility</td>
+    <td>Updated webview user agent string requirement to accomodate upstream
+        implementation change.</td>
+ </tr>
+ <tr>
+    <td>3.4.2. Browser compatibility</td>
+    <td>Added Android automotive implementations as another case that MAY omit a
+        browser application.</td>
+ </tr>
+ <tr>
+    <td>3.7. Runtime Compatibility</td>
+    <td>Updated required runtime heap size for smaller screens and added requirement
+        for the new dpi bucket (280dpi).</td>
+ </tr>
+ <tr>
+    <td>3.8.3. Notifications</td>
+    <td>Clarified notification requirement for Android Watch, Television and
+        Automotive implementations.</td>
+ </tr>
+ <tr>
+    <td>3.8.10. Lock Screen Media Control<</td>
+    <td>Clarified requirement for Android Watch and Automotive implementations.</td>
+ </tr>
+ <tr>
+    <td>3.8.13. Unicode and font</td>
+    <td>Relaxed Emoji character input method requirement.</td>
+ </tr>
+ <tr>
+    <td>3.9. Device Administration</td>
+    <td>Clarified condition when the full range of device administration policies
+        has to be supported.</td>
+ </tr>
+ <tr>
+    <td>3.10. Accessibility</td>
+    <td>Added Android automotive requirements.</td>
+ </tr>
+ <tr>
+    <td>3.11. Text-To-Speech</td>
+    <td>Added Android automotive requirements.</td>
+ </tr>
+ <tr>
+    <td>5.1. Media Codecs</td>
+    <td>Mandated decoding support for codecs reported by CamcorderProfile.</td>
+ </tr>
+   <tr>
+    <td>5.1.3 Video Codecs</td>
+    <td>Added Android automotive requirements.</td>
+ </tr>
+ <tr>
+    <td>7.1.1.3. Screen Density</td>
+    <td>Added a new screen dpi (280dpi).</td>
+ </tr>
+ <tr>
+    <td>7.1.5. Legacy Application Compatibility Mode</td>
+    <td>Added Android automotive requirements.</td>
+ </tr>
+ <tr>
+    <td>7.2 Input Devices</td>
+    <td>Added general introduction statement.</td>
+ </tr>
+ <tr>
+    <td>7.2.1. Keyboard</td>
+    <td>Added Android Automotive requirements.</td>
+ </tr>
+ <tr>
+    <td>7.2.3. Navigation Keys</td>
+    <td>Added Android Automotive requirements.</td>
+ </tr>
+ <tr>
+    <td>7.3.1. Accelerometer</td>
+    <td>Relaxed requirement for reporting frequency on Android Watch.</td>
+ </tr>
+ <tr>
+    <td>7.3.4. Gyroscope</td>
+    <td>Relaxed requirement for reporting frequency on Android Watch.</td>
+ </tr>
+ <tr>
+    <td>7.4.3 Bluetooth</td>
+    <td>Added Android Automotive requirements.</td>
+ </tr>
+ <tr>
+    <td>7.4.4. Near-Field Communications</td>
+    <td>Clarified condition for when Host Card Emulation is a requirement.</td>
+ </tr>
+ <tr>
+    <td>7.6.1. Minimum Memory and Storage</td>
+    <td>Updated minimum memory requirements for lower resulution screen devices
+        and added hard-limit requirement isLowRamDevice().</td>
+ </tr>
+ <tr>
+    <td>7.6.2. Application Shared Storage</td>
+    <td>Updated requirements when support for host machine access is mandatory.</td>
+ </tr>
+ <tr>
+    <td>7.8.1. Microphone</td>
+    <td>Added Android Automotive requirements.</td>
+ </tr>
+ <tr>
+    <td>8.2. File I/O Access Performance</td>
+    <td>Clarified requirements.</td>
+ </tr>
+ <tr>
+    <td>9.8. Privacy</td>
+    <td>Added privacy requirement for preloaded VPNs.</td>
+ </tr>
+ <tr>
+    <td>9.9. Full-Disk Encryption</td>
+    <td>Clarified condition when Full-Disk encryption support is mandatory.</td>
+ </tr>
+ <tr>
+    <td>9.10. Verified Boot</td>
+    <td>Clarified definition of verified boot.</td>
+ </tr>
+ <tr>
+    <td>11. Updatable Software</td>
+    <td>Clarified the OTA download requirement is allowed but not mandatory for
+        Android Automotive implementations.</td>
+ </tr>
+</table>
+
+
+<h1 id="13_contact_us">13. Contact Us</h1>
+
+
+<p>You can join the android-compatibility forum <a href="https://groups.google.com/forum/#!forum/android-compatibility">[Resources, 109</a>] and ask for clarifications or bring up any issues that you think the document
+does not cover.</p>
+
+<h1 id="14_resources">14. Resources</h1>
+
+
+<p>1. IETF RFC2119 Requirement Levels: <a href="http://www.ietf.org/rfc/rfc2119.txt">http://www.ietf.org/rfc/rfc2119.txt</a></p>
+
+<p>2. Android Open Source Project: <a href="http://source.android.com/">http://source.android.com/</a></p>
+
+<p>3. Android Television features: <a href="http://developer.android.com/reference/android/content/pm/PackageManager.html#FEATURE_LEANBACK">http://developer.android.com/reference/android/content/pm/PackageManager.html#FEATURE_LEANBACK</a> </p>
+
+<p>4. Android Watch feature: <a href="http://developer.android.com/reference/android/content/res/Configuration.html#UI_MODE_TYPE_WATCH">http://developer.android.com/reference/android/content/res/Configuration.html#UI_MODE_TYPE_WATCH</a></p>
+
+<p>5. API definitions and documentation: <a href="http://developer.android.com/reference/packages.html">http://developer.android.com/reference/packages.html</a></p>
+
+<p>6. Android Permissions reference: <a href="http://developer.android.com/reference/android/Manifest.permission.html">http://developer.android.com/reference/android/Manifest.permission.html</a></p>
+
+<p>7. android.os.Build reference: <a href="http://developer.android.com/reference/android/os/Build.html">http://developer.android.com/reference/android/os/Build.html</a></p>
+
+<p>8. Android ANDROID_VERSION allowed version strings: <a href="http://source.android.com/compatibility/ANDROID_VERSION/versions.html">http://source.android.com/compatibility/ANDROID_VERSION/versions.html</a></p>
+
+<p>9. Telephony Provider: <a href="http://developer.android.com/reference/android/provider/Telephony.html">http://developer.android.com/reference/android/provider/Telephony.html</a></p>
+
+<p>10. Host-based Card Emulation: <a href="http://developer.android.com/guide/topics/connectivity/nfc/hce.html">http://developer.android.com/guide/topics/connectivity/nfc/hce.html</a></p>
+
+<p>11. Android Extension Pack: <a href="http://developer.android.com/guide/topics/graphics/opengl.html#aep">http://developer.android.com/guide/topics/graphics/opengl.html#aep</a> </p>
+
+<p>12. android.webkit.WebView class: <a href="http://developer.android.com/reference/android/webkit/WebView.html">http://developer.android.com/reference/android/webkit/WebView.html</a></p>
+
+<p>13. WebView compatibility: <a href="http://www.chromium.org/">http://www.chromium.org/</a></p>
+
+<p>14. HTML5: <a href="http://html.spec.whatwg.org/multipage/">http://html.spec.whatwg.org/multipage/</a></p>
+
+<p>15. HTML5 offline capabilities:<a href="http://dev.w3.org/html5/spec/Overview.html#offline"> http://dev.w3.org/html5/spec/Overview.html#offline</a></p>
+
+<p>16. HTML5 video tag: <a href="http://dev.w3.org/html5/spec/Overview.html#video">http://dev.w3.org/html5/spec/Overview.html#video</a></p>
+
+<p>17. HTML5/W3C geolocation API: <a href="http://www.w3.org/TR/geolocation-API/">http://www.w3.org/TR/geolocation-API/</a></p>
+
+<p>18. HTML5/W3C webstorage API: <a href="http://www.w3.org/TR/webstorage/">http://www.w3.org/TR/webstorage/</a></p>
+
+<p>19. HTML5/W3C IndexedDB API: <a href="http://www.w3.org/TR/IndexedDB/">http://www.w3.org/TR/IndexedDB/</a></p>
+
+<p>20. Dalvik Executable Format and bytecode specification: available in the
+Android source code, at dalvik/docs</p>
+
+<p>21. AppWidgets: <a href="http://developer.android.com/guide/practices/ui_guidelines/widget_design.html">http://developer.android.com/guide/practices/ui_guidelines/widget_design.html</a></p>
+
+<p>22. Notifications: <a href="http://developer.android.com/guide/topics/ui/notifiers/notifications.html">http://developer.android.com/guide/topics/ui/notifiers/notifications.html</a></p>
+
+<p>23. Application Resources: <a href="https://developer.android.com/guide/topics/resources/available-resources.html">https://developer.android.com/guide/topics/resources/available-resources.html</a></p>
+
+<p>24. Status Bar icon style guide: <a href="http://developer.android.com/design/style/iconography.html">http://developer.android.com/design/style/iconography.html</a></p>
+
+<p>25. Notifications Resources: <a href="https://developer.android.com/design/patterns/notifications.html">https://developer.android.com/design/patterns/notifications.html</a> </p>
+
+<p>26. Search Manager: <a href="http://developer.android.com/reference/android/app/SearchManager.html">http://developer.android.com/reference/android/app/SearchManager.html</a> </p>
+
+<p>27. Toasts: <a href="http://developer.android.com/reference/android/widget/Toast.html">http://developer.android.com/reference/android/widget/Toast.html</a></p>
+
+<p>28. Themes: <a href="http://developer.android.com/guide/topics/ui/themes.html">http://developer.android.com/guide/topics/ui/themes.html</a></p>
+
+<p>29. R.style class: <a href="http://developer.android.com/reference/android/R.style.html">http://developer.android.com/reference/android/R.style.html</a></p>
+
+<p>30. Material design: <a href="http://developer.android.com/reference/android/R.style.html#Theme_Material">http://developer.android.com/reference/android/R.style.html#Theme_Material</a> </p>
+
+<p>31. Live Wallpapers: <a href="http://developer.android.com/reference/android/service/wallpaper/WallpaperService.html">http://developer.android.com/reference/android/service/wallpaper/WallpaperService.html</a></p>
+
+<p>32. Overview screen resources: <a href="http://developer.android.com/guide/components/recents.html">http://developer.android.com/guide/components/recents.html</a> </p>
+
+<p>33. Screen pinning: <a href="https://developer.android.com/about/versions/android-5.0.html#ScreenPinning">https://developer.android.com/about/versions/android-5.0.html#ScreenPinning</a> </p>
+
+<p>34. Input methods: <a href="http://developer.android.com/guide/topics/text/creating-input-method.html">http://developer.android.com/guide/topics/text/creating-input-method.html</a> </p>
+
+<p>35. Media Notification: <a href="https://developer.android.com/reference/android/app/Notification.MediaStyle.html">https://developer.android.com/reference/android/app/Notification.MediaStyle.html</a></p>
+
+<p>36. Dreams: <a href="http://developer.android.com/reference/android/service/dreams/DreamService.html">http://developer.android.com/reference/android/service/dreams/DreamService.html</a></p>
+
+<p>37. Settings.Secure LOCATION_MODE:</p>
+
+<p><a href="http://developer.android.com/reference/android/provider/Settings.Secure.html#LOCATION_MODE">http://developer.android.com/reference/android/provider/Settings.Secure.html#LOCATION_MODE</a></p>
+
+<p>38. Unicode 6.1.0: <a href="http://www.unicode.org/versions/Unicode6.1.0/">http://www.unicode.org/versions/Unicode6.1.0/</a></p>
+
+<p>39. Android Device Administration: <a href="http://developer.android.com/guide/topics/admin/device-admin.html">http://developer.android.com/guide/topics/admin/device-admin.html</a></p>
+
+<p>40. DevicePolicyManager reference: <a href="http://developer.android.com/reference/android/app/admin/DevicePolicyManager.html">http://developer.android.com/reference/android/app/admin/DevicePolicyManager.html</a></p>
+
+<p>41. Android Device Owner App:</p>
+
+<p><a href="http://developer.android.com/reference/android/app/admin/DevicePolicyManager.html#isDeviceOwnerApp(java.lang.String)">http://developer.android.com/reference/android/app/admin/DevicePolicyManager.html#isDeviceOwnerApp(java.lang.String)</a></p>
+
+<p>42. Android Accessibility Service APIs: <a href="http://developer.android.com/reference/android/accessibilityservice/AccessibilityService.html">http://developer.android.com/reference/android/accessibilityservice/AccessibilityService.html</a></p>
+
+<p>43. Android Accessibility APIs: <a href="http://developer.android.com/reference/android/view/accessibility/package-summary.html">http://developer.android.com/reference/android/view/accessibility/package-summary.html</a></p>
+
+<p>44. Eyes Free project: <a href="http://code.google.com/p/eyes-free/">http://code.google.com/p/eyes-free</a></p>
+
+<p>45. Text-To-Speech APIs: <a href="http://developer.android.com/reference/android/speech/tts/package-summary.html">http://developer.android.com/reference/android/speech/tts/package-summary.html</a></p>
+
+<p>46. Television Input Framework: <a href="https://source.android.com/devices/tv/index.html">https://source.android.com/devices/tv/index.html</a></p>
+
+<p>47. Reference tool documentation (for adb, aapt, ddms, systrace): <a href="http://developer.android.com/tools/help/index.html">http://developer.android.com/tools/help/index.html</a></p>
+
+<p>48. Android apk file description: <a href="http://developer.android.com/guide/components/fundamentals.html">http://developer.android.com/guide/components/fundamentals.html </a></p>
+
+<p>49. Manifest files: <a href="http://developer.android.com/guide/topics/manifest/manifest-intro.html">http://developer.android.com/guide/topics/manifest/manifest-intro.html</a></p>
+
+<p>50. Android Media Formats: <a href="http://developer.android.com/guide/appendix/media-formats.html">http://developer.android.com/guide/appendix/media-formats.html</a></p>
+
+<p>51. RTC Hardware Coding Requirements: <a href="http://www.webmproject.org/hardware/rtc-coding-requirements/">http://www.webmproject.org/hardware/rtc-coding-requirements/</a></p>
+
+<p>52. AudioEffect API: <a href="http://developer.android.com/reference/android/media/audiofx/AudioEffect.html">http://developer.android.com/reference/android/media/audiofx/AudioEffect.html</a></p>
+
+<p>53. Android android.content.pm.PackageManager class and Hardware Features List:</p>
+
+<p><a href="http://developer.android.com/reference/android/content/pm/PackageManager.html">http://developer.android.com/reference/android/content/pm/PackageManager.html</a></p>
+
+<p>54. HTTP Live Streaming Draft Protocol: <a href="http://tools.ietf.org/html/draft-pantos-http-live-streaming-03">http://tools.ietf.org/html/draft-pantos-http-live-streaming-03</a></p>
+
+<p>55. ADB: <a href="http://developer.android.com/tools/help/adb.html">http://developer.android.com/tools/help/adb.html</a> </p>
+
+<p>56. Dumpsys: <a href="https://source.android.com/devices/input/diagnostics.html">https://source.android.com/devices/input/diagnostics.html</a> </p>
+
+<p>57. DDMS: <a href="http://developer.android.com/tools/debugging/ddms.html">http://developer.android.com/tools/debugging/ddms.html</a> </p>
+
+<p>58. Monkey testing tool: <a href="http://developer.android.com/tools/help/monkey.html">http://developer.android.com/tools/help/monkey.html</a> </p>
+
+<p>59. SysyTrace tool: <a href="http://developer.android.com/tools/help/systrace.html">http://developer.android.com/tools/help/systrace.html</a></p>
+
+<p>60. Android Application Development-Related Settings:</p>
+
+<p><a href="http://developer.android.com/reference/android/provider/Settings.html#ACTION_APPLICATION_DEVELOPMENT_SETTINGS">http://developer.android.com/reference/android/provider/Settings.html#ACTION_APPLICATION_DEVELOPMENT_SETTINGS</a></p>
+
+<p>61. Supporting Multiple Screens: <a href="http://developer.android.com/guide/practices/screens_support.html">http://developer.android.com/guide/practices/screens_support.html</a></p>
+
+<p>62. android.util.DisplayMetrics: <a href="http://developer.android.com/reference/android/util/DisplayMetrics.html">http://developer.android.com/reference/android/util/DisplayMetrics.html</a></p>
+
+<p>63. RenderScript: <a href="http://developer.android.com/guide/topics/renderscript/">http://developer.android.com/guide/topics/renderscript/</a></p>
+
+<p>64. Android extension pack for OpenGL ES: <a href="https://developer.android.com/reference/android/opengl/GLES31Ext.html">https://developer.android.com/reference/android/opengl/GLES31Ext.html</a> </p>
+
+<p>65. Hardware Acceleration: <a href="http://developer.android.com/guide/topics/graphics/hardware-accel.html">http://developer.android.com/guide/topics/graphics/hardware-accel.html</a></p>
+
+<p>66. EGL Extension-EGL_ANDROID_RECORDABLE:</p>
+
+<p><a href="http://www.khronos.org/registry/egl/extensions/ANDROID/EGL_ANDROID_recordable.txt">http://www.khronos.org/registry/egl/extensions/ANDROID/EGL_ANDROID_recordable.txt</a></p>
+
+<p>67. Display Manager: <a href="http://developer.android.com/reference/android/hardware/display/DisplayManager.html">http://developer.android.com/reference/android/hardware/display/DisplayManager.html</a></p>
+
+<p>68. android.content.res.Configuration: <a href="http://developer.android.com/reference/android/content/res/Configuration.html">http://developer.android.com/reference/android/content/res/Configuration.html</a></p>
+
+<p>69. Action Assist: <a href="http://developer.android.com/reference/android/content/Intent.html#ACTION_ASSIST">http://developer.android.com/reference/android/content/Intent.html#ACTION_ASSIST</a></p>
+
+<p>70. Touch Input Configuration: <a href="http://source.android.com/devices/tech/input/touch-devices.html">http://source.android.com/devices/tech/input/touch-devices.html</a></p>
+
+<p>71. Motion Event API: <a href="http://developer.android.com/reference/android/view/MotionEvent.html">http://developer.android.com/reference/android/view/MotionEvent.html</a></p>
+
+<p>72. Key Event API: <a href="http://developer.android.com/reference/android/view/KeyEvent.html">http://developer.android.com/reference/android/view/KeyEvent.html</a> </p>
+
+<p>73. Android Open Source sensors: <a href="http://source.android.com/devices/sensors/">http://source.android.com/devices/sensors</a></p>
+
+<p>74. android.hardware.SensorEvent: <a href="http://developer.android.com/reference/android/hardware/SensorEvent.html">http://developer.android.com/reference/android/hardware/SensorEvent.html</a></p>
+
+<p>75. Timestamp sensor event: <a href="http://developer.android.com/reference/android/hardware/SensorEvent.html#timestamp">http://developer.android.com/reference/android/hardware/SensorEvent.html#timestamp</a></p>
+
+<p>76. Android Open Source composite sensors: <a href="http://source.android.com/devices/sensors/sensor-types.html#composite_sensor_type_summary">https://source.android.com/devices/sensors/sensor-types.html#composite_sensor_type_summary</a></p>
+
+<p>77. Continuous trigger mode: <a href="http://source.android.com/devices/sensors/report-modes.html#continuous">https://source.android.com/devices/sensors/report-modes.html#continuous</a></p>
+
+<p>78. Accelerometer sensor: <a href="http://developer.android.com/reference/android/hardware/Sensor.html#TYPE_ACCELEROMETER">http://developer.android.com/reference/android/hardware/Sensor.html#TYPE_ACCELEROMETER</a></p>
+
+<p>79. Wi-Fi Multicast API: <a href="http://developer.android.com/reference/android/net/wifi/WifiManager.MulticastLock.html">http://developer.android.com/reference/android/net/wifi/WifiManager.MulticastLock.html</a></p>
+
+<p>80. Wi-Fi Direct (Wi-Fi P2P): <a href="http://developer.android.com/reference/android/net/wifi/p2p/WifiP2pManager.html">http://developer.android.com/reference/android/net/wifi/p2p/WifiP2pManager.html</a></p>
+
+<p>81. WifiManager API: <a href="http://developer.android.com/reference/android/net/wifi/WifiManager.html">http://developer.android.com/reference/android/net/wifi/WifiManager.html</a></p>
+
+<p>82. Bluetooth API: <a href="http://developer.android.com/reference/android/bluetooth/package-summary.html">http://developer.android.com/reference/android/bluetooth/package-summary.html</a></p>
+
+<p>83. Bluetooth ScanFilter API: <a href="https://developer.android.com/reference/android/bluetooth/le/ScanFilter.html">https://developer.android.com/reference/android/bluetooth/le/ScanFilter.html</a></p>
+
+<p>84. NDEF Push Protocol: <a href="http://source.android.com/compatibility/ndef-push-protocol.pdf">http://source.android.com/compatibility/ndef-push-protocol.pdf</a></p>
+
+<p>85. Android Beam: <a href="http://developer.android.com/guide/topics/connectivity/nfc/nfc.html">http://developer.android.com/guide/topics/connectivity/nfc/nfc.html</a> </p>
+
+<p>86. Android NFC Sharing Settings:</p>
+
+<p><a href="http://developer.android.com/reference/android/provider/Settings.html#ACTION_NFCSHARING_SETTINGS">http://developer.android.com/reference/android/provider/Settings.html#ACTION_NFCSHARING_SETTINGS</a></p>
+
+<p>87. NFC Connection Handover: <a href="http://members.nfc-forum.org/specs/spec_list/#conn_handover">http://members.nfc-forum.org/specs/spec_list/#conn_handover</a></p>
+
+<p>88. Bluetooth Secure Simple Pairing Using NFC: <a href="http://members.nfc-forum.org/apps/group_public/download.php/18688/NFCForum-AD-BTSSP_1_1.pdf">http://members.nfc-forum.org/apps/group_public/download.php/18688/NFCForum-AD-BTSSP_1_1.pdf</a> </p>
+
+<p>89. Content Resolver: <a href="http://developer.android.com/reference/android/content/ContentResolver.html">http://developer.android.com/reference/android/content/ContentResolver.html</a></p>
+
+<p>90. Camera orientation API: <a href="http://developer.android.com/reference/android/hardware/Camera.html#setDisplayOrientation(int)">http://developer.android.com/reference/android/hardware/Camera.html#setDisplayOrientation(int)</a></p>
+
+<p>91. Camera: <a href="http://developer.android.com/reference/android/hardware/Camera.html">http://developer.android.com/reference/android/hardware/Camera.html</a></p>
+
+<p>92. Camera: <a href="http://developer.android.com/reference/android/hardware/Camera.Parameters.html">http://developer.android.com/reference/android/hardware/Camera.Parameters.html</a></p>
+
+<p>93. Camera hardware level: <a href="https://developer.android.com/reference/android/hardware/camera2/CameraCharacteristics.html#INFO_SUPPORTED_HARDWARE_LEVEL">https://developer.android.com/reference/android/hardware/camera2/CameraCharacteristics.html#INFO_SUPPORTED_HARDWARE_LEVEL</a> </p>
+
+<p>94. Camera version support: <a href="http://source.android.com/devices/camera/versioning.html">http://source.android.com/devices/camera/versioning.html</a> </p>
+
+<p>95. Android DownloadManager: <a href="http://developer.android.com/reference/android/app/DownloadManager.html">http://developer.android.com/reference/android/app/DownloadManager.html</a></p>
+
+<p>96. Android File Transfer: <a href="http://www.android.com/filetransfer">http://www.android.com/filetransfer</a></p>
+
+<p>97. Android Open Accessories: <a href="http://developer.android.com/guide/topics/connectivity/usb/accessory.html">http://developer.android.com/guide/topics/connectivity/usb/accessory.html</a></p>
+
+<p>98. Android USB Audio: <a href="http://developer.android.com/reference/android/hardware/usb/UsbConstants.html#USB_CLASS_AUDIO">http://developer.android.com/reference/android/hardware/usb/UsbConstants.html#USB_CLASS_AUDIO</a></p>
+
+<p>99. USB Charging Specification: <a href="http://www.usb.org/developers/docs/devclass_docs/USB_Battery_Charging_1.2.pdf">http://www.usb.org/developers/docs/devclass_docs/USB_Battery_Charging_1.2.pdf</a></p>
+
+<p>100. USB Host API:<a href="http://developer.android.com/guide/topics/connectivity/usb/host.html"> http://developer.android.com/guide/topics/connectivity/usb/host.html</a></p>
+
+<p>101. Wired audio headset: <a href="http://source.android.com/accessories/headset-spec.html">http://source.android.com/accessories/headset-spec.html</a> </p>
+
+<p>102. Android Security and Permissions reference: <a href="http://developer.android.com/guide/topics/security/permissions.html">http://developer.android.com/guide/topics/security/permissions.html</a></p>
+
+<p>103. UserManager reference: <a href="http://developer.android.com/reference/android/os/UserManager.html">http://developer.android.com/reference/android/os/UserManager.html</a></p>
+
+<p>104. External Storage reference: <a href="http://source.android.com/devices/storage">http://source.android.com/devices/storage</a></p>
+
+<p>105. External Storage APIs: <a href="http://developer.android.com/reference/android/os/Environment.html">http://developer.android.com/reference/android/os/Environment.html</a></p>
+
+<p>106. SMS Short Code: <a href="http://en.wikipedia.org/wiki/Short_code">http://en.wikipedia.org/wiki/Short_code</a></p>
+
+<p>107. Android Open Source Encryption: <a href="http://source.android.com/devices/tech/security/encryption/index.html">http://source.android.com/devices/tech/security/encryption/index.html</a></p>
+
+<p>108. Android Compatibility Program Overview: <a href="http://source.android.com/compatibility/index.html">http://source.android.com/compatibility/index.html</a></p>
+
+<p>109. Android Compatibility forum: <a href="https://groups.google.com/forum/#!forum/android-compatibility">https://groups.google.com/forum/#!forum/android-compatibility</a></p>
+
+<p>110. WebM project: <a href="http://www.webmproject.org/">http://www.webmproject.org/</a>  </p>
+
+<p>111. Android UI_MODE_TYPE_CAR API: <a href="http://developer.android.com/reference/android/content/res/Configuration.html#UI_MODE_TYPE_CAR">http://developer.android.com/reference/android/content/res/Configuration.html#UI_MODE_TYPE_CAR</a></p>
+
+<p>112. Android MediaCodecList API: <a href="http://developer.android.com/reference/android/media/MediaCodecList.html">http://developer.android.com/reference/android/media/MediaCodecList.html</a></p>
+
+<p>113. Android CamcorderProfile API: <a href="http://developer.android.com/reference/android/media/CamcorderProfile.html">http://developer.android.com/reference/android/media/CamcorderProfile.html</a></p>
+
+<p>Many of these resources are derived directly or indirectly from the Android
+SDK, and will be functionally identical to the information in that SDK&rsquo;s
+documentation. In any cases where this Compatibility Definition or the
+Compatibility Test Suite disagrees with the SDK documentation, the SDK
+documentation is considered authoritative. Any technical details provided in
+the references included above are considered by inclusion to be part of this
+Compatibility Definition.</p>
+
+</div>
+</body>
+</html>
diff --git a/src/compatibility/source/android-cdd-cover.css b/src/compatibility/source/android-cdd-cover.css
new file mode 100644
index 0000000..7364deb
--- /dev/null
+++ b/src/compatibility/source/android-cdd-cover.css
@@ -0,0 +1,86 @@
+/**
+* Link Styles
+*/
+
+
+a:link {
+    color: #09C;
+    text-decoration: none;
+}
+
+a:visited {
+    color: #639;
+}
+
+a:hover,
+a:focus,
+a:active {
+    color: #09C;
+}
+
+/**
+* Cover Styles
+*/
+
+
+table {
+    border: none;
+    margin: 0px;
+    padding: 0px;
+    width: 100%;
+    height: 100%;
+    background-color: black;
+}
+
+td {
+    border: none;
+    color: white;
+    font: 12pt/16pt Roboto, Arial, Helvetica, sans-serif;
+    background-color: black;
+}
+
+.title {
+    color: white;
+    font: 62px/72px Roboto, Arial, Helvetica, sans-serif;
+    padding: 40px 20px 50px 60px;
+    text-align: left;
+}
+
+.subtitle {
+    color: white;
+    font: 60px/70px Roboto, Arial, Helvetica, sans-serif;
+    padding: 50px 0px 40px 60px;
+    text-align: left;
+}
+
+.padding {
+    padding: 40px 20px 40px 60px;
+}
+
+.padding-bottom {
+    padding: 40px 20px 194px 60px;
+}
+
+.cover-text {
+    font: 20px/25px Roboto, Arial, Helvetica, sans-serif;
+    color: white;
+    padding: 5px 5px 5px 60px;
+    text-align: left;
+}
+
+
+/**
+* Body Styles
+*/
+
+body {
+    color: #333;
+    font: 12pt/16pt Roboto, Arial, Helvetica, sans-serif;
+    margin: 0px;
+    padding: 0px;
+}
+
+p {
+    margin: 0px;
+    padding: 0px;
+}
\ No newline at end of file
diff --git a/src/compatibility/source/android-cdd-cover.html b/src/compatibility/source/android-cdd-cover.html
new file mode 100644
index 0000000..eccca0c
--- /dev/null
+++ b/src/compatibility/source/android-cdd-cover.html
@@ -0,0 +1,42 @@
+<!DOCTYPE html>
+<head>
+<title>Android 6.0 Compatibility Definition</title>
+<link rel="stylesheet" type="text/css" href="android-cdd-cover.css"/>
+</head>
+
+<body>
+
+<table>
+
+<tr>
+<td>
+<p><img src="images/android-logo.png" alt="Android logo" class="padding"/></p>
+<p class="title">Compatibility Definition</p>
+</td>
+</tr>
+
+<tr>
+<td>
+<img src="images/android-marshmallow.png" alt="Marshmallow logo" style="border-top: 5px solid orange; border-bottom: 5px solid orange"/>
+</td>
+</tr>
+
+<tr>
+<td>
+<p class="subtitle">Android 6.0</p>
+<p class="cover-text">Last updated: August 20th, 2015</p>
+<p class="cover-text">Copyright &copy; 2015, Google Inc. All rights reserved.</p>
+<p class="cover-text"><a href="mailto:compatibility@android.com">compatibility@android.com</a></p>
+</td>
+</tr>
+
+<tr>
+<td>
+<p class="padding-bottom"></p>
+</td>
+</tr>
+
+</table>
+
+</body>
+</html>
diff --git a/src/compatibility/source/android-cdd-footer.html b/src/compatibility/source/android-cdd-footer.html
new file mode 100644
index 0000000..dfb0f51
--- /dev/null
+++ b/src/compatibility/source/android-cdd-footer.html
@@ -0,0 +1,37 @@
+<!DOCTYPE html>
+<html>
+<head>
+<title>Android 5.1 Compatibility Definition Footer</title>
+<link rel="stylesheet" type="text/css" href="android-cdd.css"/>
+
+<script>
+  function subst() {
+    var vars={};
+    var x=window.location.search.substring(1).split('&');
+    for (var i in x) {var z=x[i].split('=',2);vars[z[0]] = unescape(z[1]);}
+    var x=['frompage','topage','page','webpage','section','subsection','subsubsection'];
+    for (var i in x) {
+      var y = document.getElementsByClassName(x[i]);
+      for (var j=0; j<y.length; ++j) y[j].textContent = vars[x[i]];
+    }
+  }
+</script>
+
+</head>
+
+<body style="border:0; margin: 0;" onload="subst()">
+<div class="footer">
+
+<table class="noborder" style="border-top: 1px solid silver; width: 100%">
+    <tr>
+      <td class="noborder"><img src="images/android-logo.png" alt="Android logo"/></td>
+      <td class="noborder" style="text-align:right">
+        Page <span class="page"></span> of <span class="topage"></span>
+      </td>
+    </tr>
+</table>
+
+</div>
+
+</body>
+</html>
diff --git a/src/compatibility/source/android-cdd.css b/src/compatibility/source/android-cdd.css
new file mode 100644
index 0000000..83c46bc
--- /dev/null
+++ b/src/compatibility/source/android-cdd.css
@@ -0,0 +1,372 @@
+/**
+* Link Styles
+*/
+
+
+a:link {
+    color: #09C;
+    text-decoration: underline;
+}
+
+a:visited {
+    color: #639;
+}
+
+a:hover,
+a:focus,
+a:active {
+    color: #09C;
+}
+
+/**
+* Cover Styles
+*/
+
+
+#cover {
+    width: 10.5in;
+    height: 13.25in;
+    background-color: orange;
+}
+
+#cover-top {
+    background-color: black;
+    width: 100%;
+    height: 3in;
+    padding-top: 70px;
+    margin-bottom: 10px;
+}
+
+#cover-image {
+    background-color: black;
+    width: 100%;
+    height: 5in;
+    padding: 0px;
+    margin: 20px 0px 8px 0px;
+}
+
+#cover-bottom {
+    background-color: black;
+    width: 100%;
+    height: 3.7in;
+    padding: 40px 0px 40px 0px;
+    margin-top: 8px;
+}
+
+#cover a:link,
+#cover a:visited,
+#cover a:hover {
+ text-decoration: none;
+}
+
+#main {
+    width: 950px;
+    overflow: visible;
+    page-break-before: always;
+}
+
+#footer {
+    width: 8.5in;
+    height: .75in;
+    margin-top: .25in;
+    color: #333;
+    font: 10pt/14pt Roboto, Arial, Helvetica, sans-serif;
+}
+
+
+.title {
+    color: white;
+    font: 84px/90px Roboto, Arial, Helvetica, sans-serif;
+    padding: 40pt 20pt 15pt 50pt;
+    text-align: left;
+}
+
+.subtitle {
+    color: white;
+    font: 60px/70px Roboto, Arial, Helvetica, sans-serif;
+    padding: 40pt 5pt 40pt 60pt;
+    text-align: left;
+}
+
+.right {
+    text-align: right;
+}
+
+.white {
+    color: white;
+}
+
+.padding {
+    padding: 20pt 20pt 0pt 60pt;
+}
+
+.cover-text {
+    font: 20px/25px Roboto, Arial, Helvetica, sans-serif;
+    color: white;
+    padding: 5pt 5pt 5pt 60pt;
+    text-align: left;
+}
+
+.small {
+    font-size: 65%;
+    font-weight: 700;
+}
+
+/**
+* Heading Styles
+*/
+
+h1 {
+    color: #333;
+    font: 22pt/24pt Roboto, Arial, Helvetica, sans-serif;
+    padding: 10pt 0pt 0pt 0pt;
+    text-align: left;
+}
+
+h2 {
+    color: #693;
+    font: 20pt/22pt Roboto, Arial, Helvetica, sans-serif;
+    padding: 8pt 0pt 0pt 0pt;
+    text-align: left;
+    page-break-after: avoid;
+}
+
+h3 {
+    color: #333;
+    font: bold 18pt/20pt Roboto, Arial, Helvetica, sans-serif;
+    padding: 4pt 0pt 0pt 0pt;
+    text-align: left;
+    page-break-after: avoid;
+}
+
+h4 {
+    color: #607D8B;
+    font: bold 16pt/18pt Roboto, Arial, Helvetica, sans-serif;
+    padding: 4pt 0pt 0pt 0pt;
+    text-align: left;
+    page-break-after: avoid;
+}
+
+
+h5 {
+    color: #333;
+    font: italic 16pt/18pt Roboto, Arial, Helvetica, sans-serif;
+    padding: 0pt 0pt 0pt 0pt;
+    text-align: left;
+    page-break-after: avoid;
+}
+
+
+/**
+* Use h6 ONLY for table of contents
+*/
+
+h6 {
+    color: #333;
+    font: bold 16pt/18pt Roboto, Arial, Helvetica, sans-serif;
+    padding: 10pt 0pt 0pt 0pt;
+    text-align: left;
+    page-break-before: always;
+}
+
+/**
+* Body Styles
+*/
+
+body {
+    color: #333;
+    font: 16pt/20pt Roboto, Arial, Helvetica, sans-serif;
+    margin: 0;
+    padding: 5pt 5pt 5pt 10pt;
+}
+
+p {
+    color: #333;
+    font: 16pt/20pt Roboto, Arial, Helvetica, sans-serif;
+    margin: 0;
+    padding: 5pt 0pt 1pt 0pt;
+}
+
+li {
+    color: #333;
+    font: 16pt/20pt Roboto, Arial, Helvetica, sans-serif;
+    margin: 0;
+    padding: 2pt 50pt 2pt 0pt;
+}
+
+sup {
+    font-weight: 800;
+    font-size: 10pt;
+}
+
+/**
+* Table Styles
+*/
+
+
+table {
+    border: 1px solid gray;
+    border-collapse: collapse;
+    margin: 10px 0px 10px 0px;
+    width: 100%;
+    overflow: visible;
+}
+
+td {
+    border: 1px solid gray;
+    color: #333;
+    font: 16pt/20pt Roboto, Arial, Helvetica, sans-serif;
+    padding: 5pt;
+    overflow: visible;
+}
+
+th {
+    background-color: #CCC;
+    border: 1px solid gray;
+    color: #333;
+    font: bold 16pt/20pt Roboto, Arial, Helvetica, sans-serif;
+    padding: 5pt;
+    overflow: visible;
+}
+
+p.table_footnote {
+    color: #333;
+    font: 14pt/16pt Roboto, Arial, Helvetica, sans-serif;
+    margin: 0;
+    padding: 5pt 5pt 5pt 5pt;
+}
+
+li.table_list {
+    color: #333;
+    font: 16pt/20t Roboto, Arial, Helvetica, sans-serif;
+    margin-left: -10pt;
+    padding: 2pt 0pt 2pt 0pt;
+}
+
+
+/**
+* Used in the footer
+*/
+
+table.noborder {
+    border: 0px;
+    margin: 10px 0px 10px 0px;
+    width: 100%;
+}
+
+td.noborder {
+    border: 0px;
+    color: #333;
+    font: 10pt/12pt Roboto, Arial, Helvetica, sans-serif;
+    padding: 10px 0px 5px 0px;
+}
+
+
+
+/**
+* TOC Styles
+*/
+
+#toc a:link,
+#toc a:visited,
+#toc a:hover {
+ color: black;
+ text-decoration: none;
+}
+
+#toc p.toc_h1 a:link,
+#toc p.toc_h1 a:visited,
+#toc p.toc_h1 a:hover {
+ color: #99CC00;
+}
+
+#toc {
+    width: 950px;
+}
+
+#toc_left,
+#toc_left_2 {
+    float: left;
+    padding-top:15px;
+    padding-bottom:15px;
+    width: 470px;
+}
+
+#toc_right,
+#toc_right_2 {
+    float: right;
+    padding-top:15px;
+    padding-bottom:15px;
+    width: 470px;
+}
+
+p.toc_h1 {
+    color: #99CC00;
+    font: 20pt/22pt Roboto, Arial, Helvetica, sans-serif;
+    padding: 15px 0px 0px 0px;
+}
+
+p.toc_h2 {
+    color: black;
+    font: 18pt/20pt Roboto, Arial, Helvetica, sans-serif;
+    margin-left: 20px;
+    padding: 15px 0px 0px 0px;
+}
+
+p.toc_h3 {
+    color: black;
+    font: 16pt/18pt Roboto, Arial, Helvetica, sans-serif;
+    margin-left: 45px;
+    padding: 10px 0px 0px 0px;
+}
+
+p.toc_h4 {
+    color: black;
+    font: 14pt/16pt Roboto, Arial, Helvetica, sans-serif;
+    margin-left: 85px;
+    padding: 10px 0px 0px 0px;
+}
+
+p.toc_h5 {
+    color: black;
+    font: 14pt/16pt Roboto, Arial, Helvetica, sans-serif;
+    margin-left: 105px;
+}
+
+/**
+* Note Styles
+*/
+
+
+div.note 
+    {
+        border-left: 20px solid #0099cc;
+        padding-left: 10px;
+        margin: 5px 40px 5px 5px;
+    }
+
+div.tip 
+    {
+        border-left: 4px solid #93c47d;
+        padding-left: 10px;
+        margin: 5px 40px 5px 5px;
+    }
+
+div.warning 
+    {
+        border-left: 4px solid red;
+        padding-left: 10px;
+        margin: 5px 40px 5px 5px;
+    }
+
+/**
+* Media Styles
+*/
+
+@media print {
+
+    @page {
+        margin: 1in;
+    }
+
+ }
\ No newline at end of file
diff --git a/src/compatibility/images/android-logo.png b/src/compatibility/source/images/android-logo.png
similarity index 100%
rename from src/compatibility/images/android-logo.png
rename to src/compatibility/source/images/android-logo.png
Binary files differ
diff --git a/src/compatibility/images/android-lollipop-mr1.jpg b/src/compatibility/source/images/android-lollipop-mr1.jpg
similarity index 100%
rename from src/compatibility/images/android-lollipop-mr1.jpg
rename to src/compatibility/source/images/android-lollipop-mr1.jpg
Binary files differ
diff --git a/src/compatibility/source/images/android-lollipop.jpg b/src/compatibility/source/images/android-lollipop.jpg
new file mode 100644
index 0000000..7e2dcdc
--- /dev/null
+++ b/src/compatibility/source/images/android-lollipop.jpg
Binary files differ
diff --git a/src/compatibility/source/images/android-marshmallow.png b/src/compatibility/source/images/android-marshmallow.png
new file mode 100644
index 0000000..60381fa
--- /dev/null
+++ b/src/compatibility/source/images/android-marshmallow.png
Binary files differ
diff --git a/src/devices/audio/images/round_trip_bar_graph.png b/src/devices/audio/images/round_trip_bar_graph.png
index 0476574..87ec89f 100644
--- a/src/devices/audio/images/round_trip_bar_graph.png
+++ b/src/devices/audio/images/round_trip_bar_graph.png
Binary files differ
diff --git a/src/devices/audio/implement.jd b/src/devices/audio/implement.jd
index f8e2116..2ab82b0 100644
--- a/src/devices/audio/implement.jd
+++ b/src/devices/audio/implement.jd
@@ -2,7 +2,7 @@
 @jd:body
 
 <!--
-    Copyright 2014 The Android Open Source Project
+    Copyright 2015 The Android Open Source Project
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
@@ -47,9 +47,15 @@
 <code>device/&lt;company_name&gt;/&lt;device_name&gt;/audio/audio_policy.conf</code> file that
 declares the audio devices present on your product. For an example, see the file for the Galaxy
 Nexus audio hardware in <code>device/samsung/tuna/audio/audio_policy.conf</code>. Also, see the
-<code>system/core/include/system/audio.h</code> and
-<code>system/core/include/system/audio_policy.h</code> header files for a reference of the
-properties that you can define.</p>
+audio header files for a reference of the properties that you can define.</p>
+
+<p>In the Android M release and later, the paths are:<br>
+<code>system/media/audio/include/system/audio.h</code><br>
+<code>system/media/audio/include/system/audio_policy.h</code></p>
+
+<p>In Android 5.1 and earlier, the paths are:<br>
+<code>system/core/include/system/audio.h</code><br>
+<code>system/core/include/system/audio_policy.h</code></p>
 
 <h3 id="multichannel">Multi-channel support</h3>
 
diff --git a/src/devices/audio/latency_measurements.jd b/src/devices/audio/latency_measurements.jd
index 8055890..3897612 100644
--- a/src/devices/audio/latency_measurements.jd
+++ b/src/devices/audio/latency_measurements.jd
@@ -76,7 +76,7 @@
 
 <p>
 The measurements below were taken with the
-<a href="loopback.html">Dr. Rick O’Rang audio loopback dongle</a>
+<a href="loopback.html">Dr. Rick O'Rang audio loopback dongle</a>
 and an
 <a href="latency_measure.html#larsenTest">audio feedback (Larsen effect) test</a>.
 </p>
@@ -282,6 +282,16 @@
 </tr>
 
 <tr>
+  <td>Nexus 7<br />2013</td>
+  <td>6.0</td>
+  <td>MRA58K</td>
+  <td>48000</td>
+  <td>240</td>
+  <td>5</td>
+  <td>55</td>
+</tr>
+
+<tr>
   <td>Nexus 5</td>
   <td>4.4.4</td>
   <td>KTU84P</td>
@@ -312,6 +322,16 @@
 </tr>
 
 <tr>
+  <td>Nexus 5</td>
+  <td>6.0</td>
+  <td>MRA58K</td>
+  <td>48000</td>
+  <td>192</td>
+  <td>4</td>
+  <td>38</td>
+</tr>
+
+<tr>
   <td>Nexus 9</td>
   <td>5.0.0</td>
   <td>LRX21L</td>
@@ -331,7 +351,7 @@
   <td>38</td>
 </tr>
 
-</tr>
+<tr>
   <td>Nexus 9</td>
   <td>5.1.1</td>
   <td>LMY47X</td>
@@ -342,6 +362,16 @@
 </tr>
 
 <tr>
+  <td>Nexus 9</td>
+  <td>6.0</td>
+  <td>MRA58K</td>
+  <td>48000</td>
+  <td>128</td>
+  <td>2.6</td>
+  <td>15</td>
+</tr>
+
+<tr>
   <td>Nexus 6</td>
   <td>5.0.1</td>
   <td>LRX22C</td>
@@ -361,6 +391,16 @@
   <td>42</td>
 </tr>
 
+<tr>
+  <td>Nexus 6</td>
+  <td>6.0</td>
+  <td>MRA58K</td>
+  <td>48000</td>
+  <td>192</td>
+  <td>4</td>
+  <td>33</td>
+</tr>
+
 </table>
 
 <img src="images/round_trip_bar_graph.png" alt="Round-trip latency bar graph" id="figure3" />
diff --git a/src/devices/audio/midi.jd b/src/devices/audio/midi.jd
index 41e8cc0..b03ee80 100644
--- a/src/devices/audio/midi.jd
+++ b/src/devices/audio/midi.jd
@@ -60,15 +60,14 @@
 </p>
 
 <p>
-Beginning with the Android M release, device makers can enable optional MIDI support in the platform.
+Beginning with the Android 6.0 (Marshmallow) release, device makers can enable optional MIDI support in the platform.
 Supported transports include USB, draft BLE, and virtual (inter-app).
 </p>
 
 <p>
-For details on application programming with the new MIDI APIs,
-first download the
-<a href="https://developer.android.com/preview/download.html#docs">preview reference</a>
-and then see the <code>android.media.midi</code> package.
+For details on application programming with the new MIDI APIs, see the
+<a href="https://developer.android.com/reference/android/media/midi/package-summary.html"><code>android.media.midi</code></a>
+package.
 </p>
 
 <p>
@@ -91,6 +90,14 @@
 See <a href="{@docRoot}devices/tech/config/kernel.html">Android Kernel Configuration.</a>
 </p>
 
+<p>
+The MIDI over USB transport is formally defined by the
+<a href="http://www.usb.org/developers/docs/devclass_docs/midi10.pdf">
+Universal Serial Bus Device Class Definition for MIDI Devices Release 1.0 Nov 1, 1999</a>
+standard published by the
+<a href="http://www.usb.org/">USB Implementers Forum, Inc</a>.
+</p>
+
 <h3 id="usb-peripheral">USB peripheral mode</h3>
 
 <p>
@@ -117,9 +124,9 @@
 
 <p>
 In addition, the end user must also check the box for MIDI
-in the <em>Settings</em> dialog for <em>Select USB configuration</em>,
+in the <em>Settings / Developer options / Networking / Select USB Configuration</em> dialog,
 or by pulling down from the top of screen while attached
-to the USB host, and choosing <strong>MIDI</strong> for "Use USB for ...".
+to the USB host, selecting entry "USB for ...", and then choosing <strong>MIDI</strong>.
 </p>
 
 <h3 id="ble">BLE</h3>
diff --git a/src/devices/audio/tv.jd b/src/devices/audio/tv.jd
index bf60884..372c27d 100644
--- a/src/devices/audio/tv.jd
+++ b/src/devices/audio/tv.jd
@@ -2,7 +2,7 @@
 @jd:body
 
 <!--
-    Copyright 2014 The Android Open Source Project
+    Copyright 2015 The Android Open Source Project
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
@@ -74,7 +74,10 @@
 
 <p>Android supports the following audio devices for TV audio input/output.</p>
 
-<h4>system/core/include/system/audio.h</h4>
+<h4>system/media/audio/include/system/audio.h</h4>
+
+<p class="note"><strong>Note:</strong> In Android 5.1 and earlier, the path to
+this file is: <code>system/core/include/system/audio.h</code></p>
 
 <pre>
 /* output devices */
@@ -99,7 +102,10 @@
 
 <p>The Audio HAL extension for the audio routing API is defined by following:</p>
 
-<h4>system/core/include/system/audio.h</h4>
+<h4>system/media/audio/include/system/audio.h</h4>
+
+<p class="note"><strong>Note:</strong> In Android 5.1 and earlier, the path to
+this file is: <code>system/core/include/system/audio.h</code></p>
 
 <pre>
 /* audio port configuration structure used to specify a particular configuration of an audio port */
diff --git a/src/devices/devices_toc.cs b/src/devices/devices_toc.cs
index f826396..c1149ec 100644
--- a/src/devices/devices_toc.cs
+++ b/src/devices/devices_toc.cs
@@ -194,6 +194,7 @@
             </a>
         </div>
         <ul>
+          <li><a href="<?cs var:toroot ?>devices/tech/filesystem-config.html">File System Configuration</a></li>
           <li><a href="<?cs var:toroot ?>devices/tech/config/kernel.html">Kernel</a></li>
           <li><a href="<?cs var:toroot ?>devices/tech/config/low-ram.html">Low RAM</a></li>
           <li><a href="<?cs var:toroot ?>devices/tech/config/renderer.html">OpenGLRenderer</a></li>
@@ -309,6 +310,7 @@
                   </a>
                 </div>
                 <ul>
+                  <li><a href="<?cs var:toroot ?>devices/tech/security/enhancements/enhancements60.html">Android 6.0</a></li>
                   <li><a href="<?cs var:toroot ?>devices/tech/security/enhancements/enhancements50.html">Android 5.0</a></li>
                   <li><a href="<?cs var:toroot ?>devices/tech/security/enhancements/enhancements44.html">Android 4.4</a></li>
                   <li><a href="<?cs var:toroot ?>devices/tech/security/enhancements/enhancements43.html">Android 4.3</a></li>
@@ -358,6 +360,7 @@
 
       <li class="nav-section">
         <div class="nav-section-header">
+
           <a href="<?cs var:toroot ?>devices/tech/test_infra/tradefed/index.html">
             <span class="en">Testing Infrastructure</span>
           </a>
diff --git a/src/devices/graphics/implement.jd b/src/devices/graphics/implement.jd
index 59aca16..3f3654a 100644
--- a/src/devices/graphics/implement.jd
+++ b/src/devices/graphics/implement.jd
@@ -203,9 +203,9 @@
 synchronization allows producers and consumers of graphics buffers to signal
 when they are done with a buffer. This allows the Android system to
 asynchronously queue buffers to be read or written with the certainty that
-another consumer or producer does not currently need them. See the <a
-href="#synchronization_framework">Synchronization framework</a> section for an overview of
-this mechanism.</p>
+another consumer or producer does not currently need them. See the
+<a href="{@docRoot}devices/graphics/index.html#synchronization_framework">Synchronization
+framework</a> section for an overview of this mechanism.</p>
 
 <p>The benefits of explicit synchronization include less behavior variation
 between devices, better debugging support, and improved testing metrics. For
diff --git a/src/devices/graphics/index.jd b/src/devices/graphics/index.jd
index 3bba9dd..1c5b025 100644
--- a/src/devices/graphics/index.jd
+++ b/src/devices/graphics/index.jd
@@ -209,8 +209,9 @@
 <p>Since Android graphics offer no explicit parallelism, vendors have long
 implemented their own implicit synchronization within their own drivers. This
 is no longer required with the Android graphics synchronization framework. See
-the <a href="#explicit_synchronization">Explicit synchronization</a> section
-for implementation instructions.</p>
+the
+<a href="{@docRoot}devices/graphics/implement.html#explicit_synchronization">Explicit
+synchronization</a> section for implementation instructions.</p>
 
 <p>The synchronization framework explicitly describes dependencies between
 different asynchronous operations in the system. The framework provides a
diff --git a/src/devices/tech/admin/managed-profiles.jd b/src/devices/tech/admin/managed-profiles.jd
index c36510e..483fbe4 100644
--- a/src/devices/tech/admin/managed-profiles.jd
+++ b/src/devices/tech/admin/managed-profiles.jd
@@ -167,4 +167,6 @@
   <li>Disable Wi-Fi/ BT
   <li>Control <code>setGlobalSetting</code>
   <li><code>setLockTaskPackages</code> (the ability to whitelist packages that can pin themselves to the foreground)
+  <li>Set <code>DISALLOW_MOUNT_PHYSICAL_MEDIA</code> (<code>FALSE</code> by default.
+When <code>TRUE</code>, physical media, both portable and adoptable, cannot be mounted.)
 </ul>
diff --git a/src/devices/tech/filesystem-config.jd b/src/devices/tech/filesystem-config.jd
new file mode 100644
index 0000000..41ec497
--- /dev/null
+++ b/src/devices/tech/filesystem-config.jd
@@ -0,0 +1,164 @@
+page.title=Configuring the File System
+@jd:body
+
+<!--
+    Copyright 2015 The Android Open Source Project
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+-->
+
+<div id="qv-wrapper">
+  <div id="qv">
+    <h2>In this document</h2>
+    <ol id="auto-toc">
+    </ol>
+  </div>
+</div>
+
+<h2 id=abstract>Abstract</h2>
+
+<p>This document describes impending changes to the manner in which the Android
+file system is configured.</p>
+
+<p>The Android file system configuration file (<code>system/core/include/private/android_filesystem_config.h</code>) is not extensible in that device manufacturers have no means to add their own
+named binaries to the list to specify Discretionary Access Controls (DAC) of
+ownership, access mode, or executable capabilities. This limitation is shown
+with the introduction of support for Linux kernels 3.14 and higher where the
+wake lock is enabled via a capability <code>CAP_SUSPEND_BLOCK</code>; partner-supplied GPS daemons will need to hold this wake lock and thus have
+this capability set in the file system.</p>
+
+<p>Therefore, the Android M release is planned to move both the <code>fs_config</code> inline and the structure definitions in <code>system/core/include/private/android_filesystem_config.h</code> that it feeds on into <code>system/core/libcutils/fs_config.c</code> to be updated or overridden by binary files installed in <code>/system/etc/fs_config_dirs </code>and<code> /system/etc/fs_config_files</code>.</p>
+
+<h2 id=implementation>Implementation</h2>
+
+<p>Separate matching and parsing rules exist for directories and files. Files get
+the advantage of utilizing additional glob expressions. Files and Directories
+are handled separately by two different tables.</p>
+
+<p>The Android M release will remove the <code>fs_config</code> inline and the structure definitions that it feeds on, and place the code and
+default definitions into <code>system/core/libcutils/fs_config.c</code>. The <code>fs_config.c</code> file is modified beyond the basic definition to allow runtime reading of <code>/system/etc/fs_config_dirs</code> and <code>/system/etc/fs_config_files</code> to garner override that the device manufacturer would wish to extend. The same
+files accessed during build time to construct filesystem images as <code>${OUT}/system/etc/fs_config_dirs</code> and <code>${OUT}/system/etc/fs_config_files</code> may be used on the host.</p>
+
+<p><strong>Caution</strong>: This change is disruptive, as it removes some includes, structures and inline
+definitions; it also adds a need to refer to <code>libcutils</code> instead of running directly from <code>system/core/include/private/android_filesystem_config.h</code>. It also requires all device manufacturers to be informed that the location
+for adjustments for file system configuration has changed.</p>
+
+<p>There is also a tool to generate the aligned binary files <code>/system/etc/fs_config_dirs</code> and <code>/system/etc/fs_config_files</code> content that is delivered on the target.</p>
+
+<p>A new function in <code>libcutils</code> - <code>fs_config_generate()</code> - is used to manage the DAC requirements into a buffer. <code>build/tools/fs_config</code> in turn houses the new tool <code>fs_config_generate</code> that uses this library function and defines rules for an include file to
+institutionalize the DAC rules. It expects an include file in <code>device/<vendor>/<device>/android_filesystem_config.h</code> to act as the override in <code>structure fs_path_config</code> format as defined in <code>system/core/include/private/android_filesystem_config.h</code>, except defining the structure initialization for the symbols struct
+fs_path_config android<strong>_device</strong>_dirs[] and struct fs_path_config android<strong>_device</strong>_files[] for directories and files, respectively. See the example below.</p>
+
+<p>The override file may also be specified using <code>TARGET_ANDROID_FILESYSTEM_CONFIG_H </code>in the board configuration, with an enforced basename of <code>android_filesystem_config.h</code>. Finally, <code>PRODUCT_PACKAGES</code> must include <code>fs_config_dirs</code> and/or <code>fs_config_files</code> in order to install them to <code>/system/etc/fs_config_dirs</code> and <code>/system/etc/fs_config_files</code>, respectively.</p>
+
+<h3 id=instructions>Instructions</h3>
+
+<p>Follow these steps to configure the Android file system in the M release and
+later.</p>
+
+<ol>
+  <li> Create the <code>$(TARGET_DEVICE_DIR)/android_filesystem_config.h</code> file
+  <li> Add the <code>fs_config_dirs</code> and/or <code>fs_config_files</code> to <code>PRODUCT_PACKAGES </code>in the board configuration file (eg: <code>$(TARGET_DEVICE_DIR)/device.mk</code>)
+</ol>
+
+<h3 id=example>Example</h3>
+
+<p>In order to activate an override for the<code> system/bin/glgps</code> daemon to add wake lock support, one would do something like this within the <code>device/<vendor>/<device></code> directory (in patch format, relevant actions are highlighted for clarity):</p>
+
+<pre>
+diff --git a/android_filesystem_config.h b/android_filesystem_config.h
+new file mode 100644
+index 0000000..874195f
+--- /dev/null
++++ b/android_filesystem_config.h
+&#64;&#64; -0,0 +1,36 &#64;&#64;
++/*
++ * Copyright (C) 2015 The Android Open Source Project
++ *
++ * Licensed under the Apache License, Version 2.0 (the "License");
++ * you may not use this file except in compliance with the License.
++ * You may obtain a copy of the License at
++ *
++ *      http://www.apache.org/licenses/LICENSE-2.0
++ *
++ * Unless required by applicable law or agreed to in writing, software
++ * distributed under the License is distributed on an "AS IS" BASIS,
++ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
++ * implied. See the License for the specific language governing
++ * permissions and limitations under the License.
++ */
++
++/* This file is used to define the properties of the filesystem
++** images generated by build tools (eg: mkbootfs) and
++** by the device side of adb.
++*/
++
++#define NO_ANDROID_FILESYSTEM_CONFIG_DEVICE_DIRS
++/* static const struct fs_path_config android_device_dirs[] = { }; */
++
++/* Rules for files.
++** These rules are applied based on "first match", so they
++** should start with the most specific path and work their
++** way up to the root. Prefixes ending in * denotes wildcard
++** and will allow partial matches.
++*/
++static const struct fs_path_config android_device_files[] = {
++  { 00755, AID_ROOT, AID_SHELL, (1ULL &lt;&lt; CAP_BLOCK_SUSPEND),
+"system/bin/glgps" },
++#ifdef NO_ANDROID_FILESYSTEM_CONFIG_DEVICE_DIRS
++  { 00000, AID_ROOT, AID_ROOT, 0, "system/etc/fs_config_dirs" },
++#endif
++};
+
+
+diff --git a/device.mk b/device.mk
+index 0c71d21..235c1a7 100644
+--- a/device.mk
++++ b/device.mk
+&#64;&#64; -18,7 +18,8 &#64;&#64; PRODUCT_PACKAGES := \
+     libwpa_client \
+     hostapd \
+     wpa_supplicant \
+-    wpa_supplicant.conf
++    wpa_supplicant.conf \
++    fs_config_files
+ 
+ ifeq ($(TARGET_PREBUILT_KERNEL),)
+ ifeq ($(USE_SVELTE_KERNEL), true)
+</pre>
+
+<h3 id=checklist>Checklist</h3>
+
+<ol>
+  <li> <code>NO_ANDROID_FILESYSTEM_CONFIG_DEVICE_DIRS</code> and <code>NO_ANDROID_FILESYSTEM_CONFIG_DEVICE_FILES</code> are available to be defined when android_device_dirs[] and
+android_device_files[] is not being filled out.
+
+  <li> Each structure entry is the mode, uid, gid, capabilities and the name. <code>system/core/include/private/android_filesystem_config.h</code> has been included already automatically to provide the manifest defines (<code>AID_ROOT</code>, <code>AID_SHELL</code>, <code>CAP_BLOCK_SUSPEND</code> in the above).
+
+  <li> The action above in the example android_device_files[] to suppress access to <code>system/etc/fs_config_dirs</code> when we have not specified it will act as an additional DAC protection for our
+lack of any content for the directory overrides. It is considered pedantic weak
+protection since if someone has control over<code> /system</code>, they can typically do anything they want.
+
+  <li> The build system searches for the custom <code>android_filesystem_config.h</code> in <code>$(TARGET_DEVICE_DIR)</code>, in which the BoardConfig.mk exists. You can also set board config variable <code>TARGET_ANDROID_FILESYSTEM_CONFIG_H</code> to point to the file, if it exists elsewhere.
+
+  <li> On the target system, we reserve the right to apply SELinux Mandatory Access
+Controls (MAC) to these configuration files. Please check if you have custom
+target executables that utilize fs_config() to make sure you permit access if
+not provided otherwise.
+</ol>
+
+<h3 id=architectural_concerns>Architectural Concerns</h3>
+
+<ul>
+  <li> Device manufacturer private branch copies of the <code>system/core/include/private/android_filesystem_config.h</code> with extra content on existing targets will have to move over to: <code>device/<vendor>/<device>/android_filesystem_config.h</code>
+  <li> Device manufacturer private executables that depend on <code>system/code/include/private_filesystem_config.h</code> for the file or directory structures or <code>fs_config</code> will have to add <code>libcutils</code> library dependencies.
diff --git a/src/devices/tech/security/enhancements/enhancements60.jd b/src/devices/tech/security/enhancements/enhancements60.jd
new file mode 100644
index 0000000..7cc786e
--- /dev/null
+++ b/src/devices/tech/security/enhancements/enhancements60.jd
@@ -0,0 +1,38 @@
+page.title=Security Enhancements in Android 6.0
+@jd:body
+
+<p>Every Android release includes dozens of security enhancements to protect
+users. Here are some of the major security enhancements available in Android
+6.0:</p>
+<ul>
+  <li><strong>Runtime Permissions</strong>. Applications request permissions at
+    runtime instead of being granted at App
+    install time. Users can toggle permissions on and off for both M and pre-M
+    applications.</li>
+  <li><strong>Verified Boot</strong>. A set of cryptographic checks of system
+    software are conducted prior to
+    execution to ensure the phone is healthy from the bootloader all the way up to
+    the operating system.</li>
+  <li><strong>Hardware-Isolated Security</strong>. New Hardware Abstraction
+    Layer (HAL) used by Fingerprint API, Lockscreen,
+    Device Encryption, and Client Certificates to protect keys against kernel
+    compromise and/or local physical attacks</li>
+  <li><strong>Fingerprints</strong>. Devices can now be unlocked with just a
+    touch. Developers can also take
+    advantage of new APIs to use fingerprints to lock and unlock encryption keys.</li>
+  <li><strong>SD Card Adoption</strong>. Removable media can be
+    <em>adopted</em> to a device and expand available storage for
+    app local data, photos, videos, etc., but still be protected by block-level
+    encryption.</li>
+  <li><strong>Clear Text Traffic</strong>. Developers can use a new StrictMode
+    to make sure their application doesn't use
+    cleartext.</li>
+  <li><strong>System Hardening</strong>. Hardening of the system via policies
+    enforced by SELinux. This offers better
+    isolation between users, IOCTL filtering, reduce threat of exposed services,
+    further tightening of SELinux domains, and extremely limited /proc access.</li>
+  <li><strong>USB Access Control:</strong> Users must confirm to allow USB
+    access to files, storage, or other
+    functionality on the phone. Default is now <em>charge only</em> with access
+    to storage requiring explicit approval from the user.</li>
+</ul>
diff --git a/src/devices/tech/security/selinux/implement.jd b/src/devices/tech/security/selinux/implement.jd
index aa89303..0655e1d 100644
--- a/src/devices/tech/security/selinux/implement.jd
+++ b/src/devices/tech/security/selinux/implement.jd
@@ -140,6 +140,11 @@
         sepolicy.te
 </pre>
 
+<p class="note"><strong>Note:</strong> As of the M release,
+BOARD_SEPOLICY_UNION is no longer required as all policy files found within any
+directory included in the BOARD_SEPOLICY_DIRS variable are joined with the
+base policy automatically.</p>
+
 <p>After rebuilding your device, it is enabled with SELinux. You can now either
 customize your SELinux policies to accommodate your own additions to the
 Android operating system as described in <a
diff --git a/src/index.jd b/src/index.jd
index 199b14a..b77ab6e 100644
--- a/src/index.jd
+++ b/src/index.jd
@@ -42,53 +42,75 @@
   <div class="landing-docs">
     <div class="col-8">
     <h3>What's New</h3>
-<a href="{@docRoot}devices/tech/config/uicc.html">
-        <h4>UICC Carrier Privileges</h4></a>
-        <p>Carriers now have a mechanism to grant special privileges for APIs
-        relevant to the <strong><a
-        href="{@docRoot}devices/tech/config/uicc.html">Universal Integrated
-        Circuit Card (UICC)</a></strong> owner’s apps. This mechanism provides a
-        secure and flexible way to manage apps from the Mobile Network Operator
-        (MNO).</p>
-
-<a href="{@docRoot}devices/audio/midi.html">
-        <h4>Audio MIDI Updates</h4></a>
-        <p><strong><a
-        href="{@docRoot}devices/audio/midi.html#usb-host">Audio MIDI</a></strong>
-        replaces former Tegra examples with generic changelists. And <strong><a
-        href="{@docRoot}devices/tech/config/kernel.html">Kernel
-        Configuration</a></strong> now contains the setting for USB host mode MIDI.</p>
-
-<a href="{@docRoot}source/downloading.html">
-        <h4>Repo Version 1.22 Checksum</h4></a>
-        <p>The <strong><a
-        href="{@docRoot}source/downloading.html#installing-repo">SHA-1 checksum
-        for Repo 1.22</a></strong> has been posted to enable verification and use of the latest
-        version of the tool.</p>
-
 <a href="{@docRoot}source/build-numbers.html">
-        <h4>Build Numbers for Nexus Devices</h4></a>
-        <p>New <strong><a
-        href="{@docRoot}source/build-numbers.html#source-code-tags-and-builds">build
-        tags and branches</a></strong> have been published for Nexus 4, Nexus 5, Nexus 6,
-        Nexus 7 (flo/deb), Nexus 9 (volantis/volantisg), Nexus 10, and Nexus Player.</p>
+        <h4>Android 6.0 and 5.1 Build Numbers and CTS Packages</h4></a>
+        <p>You can now find <strong><a
+        href="{@docRoot}source/build-numbers.html#source-code-tags-and-builds">Build
+        Numbers</a></strong> and CTS packages for <strong><a
+        href="{@docRoot}compatibility/downloads.html#android-60">Android
+        6.0</a></strong> and <strong><a
+        href="{@docRoot}compatibility/downloads.html#android-51">Android
+        5.1</a></strong>.</p>
+
+<a href="{@docRoot}devices/halref/index.html">
+        <h4>HAL and Trad Fed Reference Files</h4></a>
+        <p>Both the <strong><a
+        href="{@docRoot}devices/halref/index.html">Hardware Abstraction Layer
+        (HAL)</a></strong> and <strong><a
+        href="{@docRoot}reference/packages.html">Trade Federation Testing
+        Suite</a></strong> reference files have been updated for Android 6.0.</p>
+
+<a href="{@docRoot}devices/tech/security/enhancements/index.html">
+        <h4>Android 6.0 Security Enhancements</h4></a>
+        <p>The Android security team lists the latest measures undertaken to
+        strengthen the operating system in the new <strong><a
+        href="{@docRoot}devices/tech/security/enhancements/enhancements60.html">Security
+        Enhancements in Android 6.0</a></strong>.</p>
 
 <a href="{@docRoot}devices/tech/power/index.html">
-        <h4>Power Reorganization and Additions</h4></a>
-        <p>The previously singular Power page has been reorganized into a
-        <strong><a href="{@docRoot}devices/tech/power/index.html">Power
-        </a></strong> section that has gained <strong><a
-        href="{@docRoot}devices/tech/power/values.html#values">example values</a></strong> for
-        <code>camera.avg</code> and <code>camera.flashlight</code>.</p>
+        <h4>Doze and App Standby</h4></a>
+        <p>New battery-saving features <em>Doze</em> and <em>App Standby</em>
+        are described in <strong><a href="{@docRoot}devices/tech/power/mgmt.html">Power
+        Management</a></strong> while the remaining <strong><a
+        href="{@docRoot}devices/tech/power/index.html">Power</a></strong> section has
+        been revised.</p>
 
-<a href="{@docRoot}devices/tech/debug/asan.html">
-        <h4>AddressSanitizer and Native Debugging Instructions</h4></a>
+<a href="{@docRoot}devices/tech/security/authentication/index.html">
+        <h4>Authentication</h4></a>
+        <p>An entirely new <strong><a
+        href="{@docRoot}devices/tech/security/authentication/index.html">Authentication</a></strong>
+        section describes the <strong><a
+        href="{@docRoot}devices/tech/security/authentication/fingerprint-hal.html">Fingerprint</a></strong>,
+        <strong><a
+        href="{@docRoot}devices/tech/security/authentication/gatekeeper.html">Gatekeeper</a></strong>,
+        and <strong><a
+        href="{@docRoot}devices/tech/security/authentication/keymaster.html">Keymaster</a></strong>
+        interfaces in detail, including a list of <strong><a
+        href="{@docRoot}devices/tech/security/authentication/km-features.html">Keymaster
+        features</a></strong> and an <strong><a
+        href="{@docRoot}devices/tech/security/authentication/km-implementer-ref.html">implementer's
+        reference</a></strong>.</p>
+
+<a href="{@docRoot}devices/storage/index.html">
+        <h4>Adoptable Storage</h4></a>
         <p>The <strong><a
-        href="{@docRoot}devices/tech/debug/asan.html">AddressSanitizer</a></strong>
-        tool for detecting memory bugs in native Android code is documented for the
-        first time in a dedicated page. Similarly, the main <strong><a
-        href="{@docRoot}devices/tech/debug/index.html">Debugging</a></strong> page now contains
-        instructions for debuggerd, GDB, and Valgrind.</p>
+        href="{@docRoot}devices/storage/index.html">Storage</a></strong>
+        section has been revised to introduce <strong><a
+        href="{@docRoot}devices/storage/adoptable.html">adoptable
+        storage</a></strong> that can hold app data and distinguish between it and <strong><a
+        href="{@docRoot}devices/storage/traditional.html">traditional
+        storage</a></strong>.</p>
+
+<a href="{@docRoot}devices/tech/config/index.html">
+        <h4>Configuration</h4></a>
+        <p>Instructions now exist for configuring <strong><a
+        href="{@docRoot}devices/tech/config/runtime_perms.html">runtime permissions</a></strong>,
+        <strong><a href="{@docRoot}devices/tech/config/voicemail.html">visual
+        voicemail</a></strong>, and Android's new <strong><a
+        href="{@docRoot}devices/tech/config/filesystem.html">file
+        system</a></strong>. And carriers get <strong><a
+        href="{@docRoot}devices/tech/config/carrier.html">custom
+        configuration</a></strong>.</p>
     </div>
 
     <div class="col-8">
diff --git a/src/source/build-numbers.jd b/src/source/build-numbers.jd
index 0f7bee5..eca6fd7 100644
--- a/src/source/build-numbers.jd
+++ b/src/source/build-numbers.jd
@@ -41,6 +41,11 @@
 </thead>
 <tbody>
 <tr>
+<td>Marshmallow</td>
+<td>6.0</td>
+<td>API level 23</td>
+</tr>
+<tr>
 <td>Lollipop</td>
 <td>5.1</td>
 <td>API level 22</td>
@@ -178,6 +183,42 @@
 <th>Supported devices</th>
 </tr>
 <tr>
+  <td>MRA58K</td>
+  <td>android-6.0.0_r1</td>
+  <td>Marshmallow</td>
+  <td>Nexus 5, Nexus 6, Nexus 7 (flo/deb), Nexus 9 (volantis/volantisg), Nexus Player</td>
+</tr>
+<tr>
+  <td>LMY48W</td>
+  <td>android-5.1.1_r24</td>
+  <td>Lollipop</td>
+  <td>Nexus 6</td>
+</tr>
+<tr>
+  <td>LVY48H</td>
+  <td>android-5.1.1_r23</td>
+  <td>Lollipop</td>
+  <td>Nexus 6 (For Project Fi ONLY)</td>
+</tr>
+<tr>
+  <td>LYZ28M</td>
+  <td>android-5.1.1_r22</td>
+  <td>Lollipop</td>
+  <td>Nexus 6 (For T-Mobile ONLY)</td>
+</tr>
+<tr>
+  <td>LMY48U</td>
+  <td>android-5.1.1_r20</td>
+  <td>Lollipop</td>
+  <td>Nexus 7 (deb)</td>
+</tr>
+<tr>
+  <td>LMY48T</td>
+  <td>android-5.1.1_r19</td>
+  <td>Lollipop</td>
+  <td>Nexus 4, Nexus 6, Nexus 9 (volantis/volantisg), Nexus 10</td>
+</tr>
+<tr>
   <td>LVY48F</td>
   <td>android-5.1.1_r18</td>
   <td>Lollipop</td>
diff --git a/src/source/initializing.jd b/src/source/initializing.jd
index abb0e29..736f9c4 100644
--- a/src/source/initializing.jd
+++ b/src/source/initializing.jd
@@ -171,7 +171,7 @@
 <p>You can also create it from a shell with the following command:</p>
 <pre><code># hdiutil create -type SPARSE -fs 'Case-sensitive Journaled HFS+' -size 40g ~/android.dmg
 </code></pre>
-<p>This will create a <code>.dmg</code> (or possibly a <code>.dmg.sparsefile</code>) file which, once mounted, acts as a drive with the required formatting for Android development. 
+<p>This will create a <code>.dmg</code> (or possibly a <code>.dmg.sparseimage</code>) file which, once mounted, acts as a drive with the required formatting for Android development.
 <p>If you need a larger volume later, you can also resize the sparse image with the following command:</p>
 <pre><code># hdiutil resize -size &lt;new-size-you-want&gt;g ~/android.dmg.sparseimage
 </code></pre>
@@ -182,7 +182,7 @@
 <pre><code># mount the android file image
 function mountAndroid { hdiutil attach ~/android.dmg -mountpoint /Volumes/android; }
 </code></pre>
-<p class="note"><strong>Note:</strong> If your system created a <code>.dmg.sparsefile</code> file, replace <code>~/android.dmg</code> with <code>~/android.dmg.sparsefile</code>.</p>
+<p class="note"><strong>Note:</strong> If your system created a <code>.dmg.sparseimage</code> file, replace <code>~/android.dmg</code> with <code>~/android.dmg.sparseimage</code>.</p>
 </li>
 <li>
 <p>To unmount it when you execute <code>umountAndroid</code>:</p>