diff --git a/src/source/64-bit-builds.jd b/src/source/64-bit-builds.jd
index 2373886..ad174fb 100644
--- a/src/source/64-bit-builds.jd
+++ b/src/source/64-bit-builds.jd
@@ -1,4 +1,4 @@
-page.title=Android Platform 64-bit Build Instructions
+page.title=Understanding 64-bit Builds
 @jd:body
 
 <!--
diff --git a/src/source/configure-products.jd b/src/source/add-device.jd
similarity index 97%
rename from src/source/configure-products.jd
rename to src/source/add-device.jd
index 01fc788..8dd5c6b 100644
--- a/src/source/configure-products.jd
+++ b/src/source/add-device.jd
@@ -1,4 +1,4 @@
-page.title=Configuring the Products
+page.title=Adding a New Device
 @jd:body
 
 <!--
@@ -24,7 +24,10 @@
   </div>
 </div>
 
-<p>Use the information in this page to create the Makefiles for your device and product.</p>
+<p>Use the information in this page to create the Makefiles for your device and
+product. Please note, unlike the other pages in this section, the contents here
+are applicable only when creating an entirely new device type and are intended
+for company build and product teams only.</p>
 
 <h2 id="build-layers">Understand Build Layers</h2>
 
diff --git a/src/source/building-running.jd b/src/source/building-running.jd
deleted file mode 100644
index d9eb0bf..0000000
--- a/src/source/building-running.jd
+++ /dev/null
@@ -1,158 +0,0 @@
-page.title=Building the System
-@jd:body
-
-<!--
-    Copyright 2015 The Android Open Source Project
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
--->
-<div id="qv-wrapper">
-  <div id="qv">
-    <h2>In this document</h2>
-    <ol id="auto-toc">
-    </ol>
-  </div>
-</div>
-
-<p>The following instructions to build the Android source tree apply to all
-branches, including <code>master</code>. The basic sequence of build commands
-is as follows:</p>
-
-<h2 id="initialize">Initialize</h2>
-<p>Initialize the environment with the <code>envsetup.sh</code> script. Note
-that replacing <code>source</code> with <code>.</code> (a single dot) saves a few characters,
-and the short form is more commonly used in documentation.</p>
-<pre><code>$ source build/envsetup.sh
-</code></pre>
-<p>or</p>
-<pre><code>$ . build/envsetup.sh
-</code></pre>
-
-<h2 id="choose-a-target">Choose a Target</h2>
-<p>Choose which target to build with <code>lunch</code>.  The exact configuration can be passed as
-an argument. For example, the following command:</p>
-<pre><code>$ lunch aosp_arm-eng
-</code></pre>
-<p>refers to a complete build for the emulator, with all debugging enabled.</p>
-<p>If run with no arguments <code>lunch</code> will prompt you to choose a target from the menu. </p>
-<p>All build targets take the form <code>BUILD-BUILDTYPE</code>, where the <code>BUILD</code> is a codename
-referring to the particular feature combination.</p>
-
-<p>The BUILDTYPE is one of the following:</p>
-<table>
-<thead>
-<tr>
-<th>Buildtype</th>
-<th>Use</th>
-</tr>
-</thead>
-<tbody>
-<tr>
-<td>user</td>
-<td>limited access; suited for production</td>
-</tr>
-<tr>
-<td>userdebug</td>
-<td>like "user" but with root access and debuggability; preferred for debugging</td>
-</tr>
-<tr>
-<td>eng</td>
-<td>development configuration with additional debugging tools</td>
-</tr>
-</tbody>
-</table>
-<p>For more information about building for and running on actual hardware, see
-<a href="building-devices.html">Building for Devices</a>.</p>
-
-<h2 id="build-the-code">Build the code</h2>
-<p>Build everything with <code>make</code>. GNU make can handle parallel
-tasks with a <code>-jN</code> argument, and it's common to use a number of
-tasks N that's between 1 and 2 times the number of hardware
-threads on the computer being used for the build. For example, on a
-dual-E5520 machine (2 CPUs, 4 cores per CPU, 2 threads per core),
-the fastest builds are made with commands between <code>make -j16</code> and
-<code>make -j32</code>.</p>
-<pre><code>$ make -j4
-</code></pre>
-<h2 id="run-it">Run It!</h2>
-<p>You can either run your build on an emulator or flash it on a device. Please note that you have already selected your build target with <code>lunch</code>, and it is unlikely at best to run on a different target than it was built for.</p>
-<h3 id="flash-a-device">Flash a Device</h3>
-<p>To flash a device, you will need to use <code>fastboot</code>, which should be included in your path after a successful build. Place the device in fastboot mode either manually by holding the appropriate key combination at boot, or from the shell with</p>
-<pre><code>$ adb reboot bootloader
-</code></pre>
-<p>Once the device is in fastboot mode, run </p>
-<pre><code>$ fastboot flashall -w
-</code></pre>
-<p>The <code>-w</code> option wipes the <code>/data</code> partition on the device; this is useful for your first time flashing a particular device but is otherwise unnecessary.</p>
-<p>For more information about building for and running on actual hardware, see
-<a href="building-devices.html">Building for Devices.</a></p>
-<h3 id="emulate-an-android-device">Emulate an Android Device</h3>
-<p>The emulator is added to your path automatically by the build process. To run the emulator, type</p>
-<pre><code>$ emulator
-</code></pre>
-<h2 id="using-ccache">Using ccache</h2>
-<p>ccache is a compiler cache for C and C++ that can help make builds faster.
-In the root of the source tree, do the following:</p>
-<pre><code>$ export USE_CCACHE=1
-$ export CCACHE_DIR=/&lt;path_of_your_choice&gt;/.ccache
-$ prebuilts/misc/linux-x86/ccache/ccache -M 50G
-</code></pre>
-<p>The suggested cache size is 50-100G.</p>
-<p>On Linux, you can watch ccache being used by doing the following:</p>
-<pre><code>$ watch -n1 -d prebuilts/misc/linux-x86/ccache/ccache -s
-</code></pre>
-<p>On Mac OS, you should replace <code>linux-x86</code> with <code>darwin-x86</code>.</p>
-<p>When using Ice Cream Sandwich (4.0.x) or older, you should replace
-<code>prebuilts/misc</code> with <code>prebuilt</code>.</p>
-<h2 id="troubleshooting-common-build-errors">Troubleshooting Common Build Errors</h2>
-<h3 id="wrong-java-version">Wrong Java Version</h3>
-<p>If you are attempting to build a version of Android inconsistent with your
-version of Java, <code>make</code> will abort with a message such as</p>
-<pre><code>************************************************************
-You are attempting to build with the incorrect version
-of java.
-
-Your version is: WRONG_VERSION.
-The correct version is: RIGHT_VERSION.
-
-Please follow the machine setup instructions at
-    https://source.android.com/source/download.html
-************************************************************
-</code></pre>
-<p>This may be caused by:</p>
-<ul>
-<li>
-<p>Failing to install the correct JDK as specified in <a href="initializing.html">Initializing the Build Environment</a>.</p>
-</li>
-<li>
-<p>Another JDK previously installed appearing in your path. Prepend the correct JDK to the beginning of your PATH or remove the problematic JDK.</p>
-</li>
-</ul>
-<h3 id="python-version-3">Python Version 3</h3>
-<p>Repo is built on particular functionality from Python 2.x and is unfortunately incompatible with Python 3.  In order to use repo, please install Python 2.x:</p>
-<pre><code>$ apt-get install python
-</code></pre>
-<h3 id="case-insensitive-filesystem">Case Insensitive Filesystem</h3>
-<p>If you are building on an HFS filesystem on Mac OS, you may encounter an error such as</p>
-<pre><code>************************************************************
-You are building on a case-insensitive filesystem.
-Please move your source tree to a case-sensitive filesystem.
-************************************************************
-</code></pre>
-<p>Please follow the instructions in <a href="initializing.html">Initializing the Build Environment</a> for creating a case-sensitive disk image.</p>
-<h3 id="no-usb-permission">No USB Permission</h3>
-<p>On most Linux systems, unprivileged users cannot access USB ports by default. If you see a permission denied error, follow the instructions
-<a href="initializing.html">Initializing the Build Environment</a> for configuring USB access.  </p>
-<p>If adb was already running and cannot connect to the device after
-getting those rules set up, it can be killed with <code>adb kill-server</code>.
-That will cause adb to restart with the new configuration.</p>
diff --git a/src/source/building.jd b/src/source/building.jd
index 78401da..ecb52db 100644
--- a/src/source/building.jd
+++ b/src/source/building.jd
@@ -1,8 +1,8 @@
-page.title=Downloading and Building
+page.title=Building the System
 @jd:body
 
 <!--
-    Copyright 2014 The Android Open Source Project
+    Copyright 2015 The Android Open Source Project
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
@@ -16,50 +16,143 @@
     See the License for the specific language governing permissions and
     limitations under the License.
 -->
-<p>The Android build is routinely tested in-house on recent versions of
-Ubuntu LTS (14.04), but most distributions should have the required
-build tools available. We welcome reports of successes or failures on other
-distributions.</p>
+<div id="qv-wrapper">
+  <div id="qv">
+    <h2>In this document</h2>
+    <ol id="auto-toc">
+    </ol>
+  </div>
+</div>
 
-<p>Before you download and build the Android source, ensure your system meets
-the following requirements:</p>
+<p>The following instructions to build the Android source tree apply to all
+branches, including <code>master</code>. The basic sequence of build commands
+is as follows:</p>
 
+<h2 id="initialize">Set up environment</h2>
+<p>Initialize the environment with the <code>envsetup.sh</code> script. Note
+that replacing <code>source</code> with <code>.</code> (a single dot) saves a few characters,
+and the short form is more commonly used in documentation.</p>
+<pre><code>$ source build/envsetup.sh
+</code></pre>
+<p>or</p>
+<pre><code>$ . build/envsetup.sh
+</code></pre>
+
+<h2 id="choose-a-target">Choose a Target</h2>
+<p>Choose which target to build with <code>lunch</code>.  The exact configuration can be passed as
+an argument. For example, the following command:</p>
+<pre><code>$ lunch aosp_arm-eng
+</code></pre>
+<p>refers to a complete build for the emulator, with all debugging enabled.</p>
+<p>If run with no arguments <code>lunch</code> will prompt you to choose a target from the menu. </p>
+<p>All build targets take the form <code>BUILD-BUILDTYPE</code>, where the <code>BUILD</code> is a codename
+referring to the particular feature combination.</p>
+
+<p>The BUILDTYPE is one of the following:</p>
+<table>
+<thead>
+<tr>
+<th>Buildtype</th>
+<th>Use</th>
+</tr>
+</thead>
+<tbody>
+<tr>
+<td>user</td>
+<td>limited access; suited for production</td>
+</tr>
+<tr>
+<td>userdebug</td>
+<td>like "user" but with root access and debuggability; preferred for debugging</td>
+</tr>
+<tr>
+<td>eng</td>
+<td>development configuration with additional debugging tools</td>
+</tr>
+</tbody>
+</table>
+<p>For more information about building for and running on actual hardware, see
+<a href="running.html">Running Builds</a>.</p>
+
+<h2 id="build-the-code">Build the code</h2>
+<p>Build everything with <code>make</code>. GNU make can handle parallel
+tasks with a <code>-jN</code> argument, and it's common to use a number of
+tasks N that's between 1 and 2 times the number of hardware
+threads on the computer being used for the build. For example, on a
+dual-E5520 machine (2 CPUs, 4 cores per CPU, 2 threads per core),
+the fastest builds are made with commands between <code>make -j16</code> and
+<code>make -j32</code>.</p>
+<pre><code>$ make -j4
+</code></pre>
+<h2 id="run-it">Run It!</h2>
+<p>You can either run your build on an emulator or flash it on a device. Please note that you have already selected your build target with <code>lunch</code>, and it is unlikely at best to run on a different target than it was built for.</p>
+<h3 id="flash-a-device">Flash a Device</h3>
+<p>To flash a device, you will need to use <code>fastboot</code>, which should be included in your path after a successful build. Place the device in fastboot mode either manually by holding the appropriate key combination at boot, or from the shell with</p>
+<pre><code>$ adb reboot bootloader
+</code></pre>
+<p>Once the device is in fastboot mode, run </p>
+<pre><code>$ fastboot flashall -w
+</code></pre>
+<p>The <code>-w</code> option wipes the <code>/data</code> partition on the device; this is useful for your first time flashing a particular device but is otherwise unnecessary.</p>
+<p>For more information about building for and running on actual hardware, see
+<a href="running.html">Running Builds</a>.</p>
+<h3 id="emulate-an-android-device">Emulate an Android Device</h3>
+<p>The emulator is added to your path automatically by the build process. To run the emulator, type</p>
+<pre><code>$ emulator
+</code></pre>
+<h2 id="using-ccache">Using ccache</h2>
+<p>ccache is a compiler cache for C and C++ that can help make builds faster.
+In the root of the source tree, do the following:</p>
+<pre><code>$ export USE_CCACHE=1
+$ export CCACHE_DIR=/&lt;path_of_your_choice&gt;/.ccache
+$ prebuilts/misc/linux-x86/ccache/ccache -M 50G
+</code></pre>
+<p>The suggested cache size is 50-100G.</p>
+<p>On Linux, you can watch ccache being used by doing the following:</p>
+<pre><code>$ watch -n1 -d prebuilts/misc/linux-x86/ccache/ccache -s
+</code></pre>
+<p>On Mac OS, you should replace <code>linux-x86</code> with <code>darwin-x86</code>.</p>
+<p>When using Ice Cream Sandwich (4.0.x) or older, you should replace
+<code>prebuilts/misc</code> with <code>prebuilt</code>.</p>
+<h2 id="troubleshooting-common-build-errors">Troubleshooting Common Build Errors</h2>
+<h3 id="wrong-java-version">Wrong Java Version</h3>
+<p>If you are attempting to build a version of Android inconsistent with your
+version of Java, <code>make</code> will abort with a message such as</p>
+<pre><code>************************************************************
+You are attempting to build with the incorrect version
+of java.
+
+Your version is: WRONG_VERSION.
+The correct version is: RIGHT_VERSION.
+
+Please follow the machine setup instructions at
+    https://source.android.com/source/download.html
+************************************************************
+</code></pre>
+<p>This may be caused by:</p>
 <ul>
-
-  <li>A Linux or Mac OS system. It is also possible
-  to build Android in a virtual machine on unsupported systems such as Windows.
-  If you are running Linux in a virtual machine, you need at
-  least 16GB of RAM/swap and 100GB or more of disk space in order to
-  build the Android tree. See disk size requirements below.
-  </li>
-
-  <li>A 64-bit environment is required for Gingerbread (2.3.x) and newer versions, including the master
-  branch. You can compile older versions on 32-bit systems.
-  </li>
-
-  <li>At least 100GB of free disk space for a checkout, 150GB for a single
-  build, and 200GB or more for multiple builds. If you employ ccache, you will
-  need even more space.</p>
-  </li>
-
-  <li>
-  Python 2.6 -- 2.7, which you can download from <a href="http://www.python.org/download/">python.org</a>.</p>
-  </li>
-
-  <li>
-  GNU Make 3.81 -- 3.82, which you can download from <a href="http://ftp.gnu.org/gnu/make/">gnu.org</a>,</p>
-  </li>
-
-  <li>
-  JDK 7 to build the master branch of Android in the <a
-  href="https://android.googlesource.com/">Android Open Source Project
-  (AOSP)</a>; JDK 6 to build Gingerbread through KitKat; JDK 5 for Cupcake through
-  Froyo. See <a href="initializing.html">Initializing a Build Environment</a>
-  for installation instructions by operating system.</p>
-  </li>
-
-  <li>
-  Git 1.7 or newer. You can find it at <a href="http://git-scm.com/download">git-scm.com</a>.</p>
-  </li>
-
+<li>
+<p>Failing to install the correct JDK as specified in <a href="initializing.html">Initializing the Build Environment</a>.</p>
+</li>
+<li>
+<p>Another JDK previously installed appearing in your path. Prepend the correct JDK to the beginning of your PATH or remove the problematic JDK.</p>
+</li>
 </ul>
+<h3 id="python-version-3">Python Version 3</h3>
+<p>Repo is built on particular functionality from Python 2.x and is unfortunately incompatible with Python 3.  In order to use repo, please install Python 2.x:</p>
+<pre><code>$ apt-get install python
+</code></pre>
+<h3 id="case-insensitive-filesystem">Case Insensitive Filesystem</h3>
+<p>If you are building on an HFS filesystem on Mac OS, you may encounter an error such as</p>
+<pre><code>************************************************************
+You are building on a case-insensitive filesystem.
+Please move your source tree to a case-sensitive filesystem.
+************************************************************
+</code></pre>
+<p>Please follow the instructions in <a href="initializing.html">Initializing the Build Environment</a> for creating a case-sensitive disk image.</p>
+<h3 id="no-usb-permission">No USB Permission</h3>
+<p>On most Linux systems, unprivileged users cannot access USB ports by default. If you see a permission denied error, follow the instructions
+<a href="initializing.html">Initializing the Build Environment</a> for configuring USB access.  </p>
+<p>If adb was already running and cannot connect to the device after
+getting those rules set up, it can be killed with <code>adb kill-server</code>.
+That will cause adb to restart with the new configuration.</p>
diff --git a/src/source/git-resources.jd b/src/source/git-resources.jd
index 5606b2d..0d15bac 100644
--- a/src/source/git-resources.jd
+++ b/src/source/git-resources.jd
@@ -1,4 +1,4 @@
-page.title=Git Resources
+page.title=Learning Git
 @jd:body
 
 <!--
diff --git a/src/source/initializing.jd b/src/source/initializing.jd
index 6c52343..bf2e528 100644
--- a/src/source/initializing.jd
+++ b/src/source/initializing.jd
@@ -1,4 +1,4 @@
-page.title=Initializing a Build Environment
+page.title=Establishing a Build Environment
 @jd:body
 
 <!--
@@ -47,9 +47,10 @@
 <p>For Gingerbread (2.3.x) and newer versions, including the <code>master</code>
 branch, a 64-bit environment is required. Older versions can be
 compiled on 32-bit systems.</p>
-<p class="note"><strong>Note:</strong> See the <a href="building.html">Downloading and
-Building</a> page for the list of hardware and software requirements. Then
-follow the detailed instructions for Ubuntu and Mac OS below.</p>
+<p class="note"><strong>Note:</strong> See the <a
+href="requirements.html">Requirements</a> for the complete list of hardware and
+software requirements. Then follow the detailed instructions for Ubuntu and Mac
+OS below.</p>
 
 <h3 id="installing-the-jdk">Installing the JDK</h3>
 <p>The <code>master</code> branch of Android in the <a
@@ -66,7 +67,7 @@
 </code></pre>
 
 <p>If you encounter version errors for Java, set its
-path as described in the <a href="building-running.html#wrong-java-version">Wrong
+path as described in the <a href="building.html#wrong-java-version">Wrong
 Java Version</a> section.</p>
 
 <p>To develop older versions of Android, download and install the corresponding version of the <a
diff --git a/src/source/requirements.jd b/src/source/requirements.jd
new file mode 100644
index 0000000..c063ca3
--- /dev/null
+++ b/src/source/requirements.jd
@@ -0,0 +1,64 @@
+page.title=Requirements
+@jd:body
+
+<!--
+    Copyright 2015 The Android Open Source Project
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+-->
+<p>The Android build is routinely tested in-house on recent versions of
+Ubuntu LTS (14.04), but most distributions should have the required
+build tools available.</p>
+
+<p>Before you download and build the Android source, ensure your system meets
+the following requirements:</p>
+
+<ul>
+
+  <li>A Linux or Mac OS system. It is also possible
+  to build Android in a virtual machine on unsupported systems such as Windows.
+  If you are running Linux in a virtual machine, you need at
+  least 16GB of RAM/swap and 100GB or more of disk space in order to
+  build the Android tree. See disk size requirements below.
+  </li>
+
+  <li>A 64-bit environment is required for Gingerbread (2.3.x) and newer versions, including the master
+  branch. You can compile older versions on 32-bit systems.
+  </li>
+
+  <li>At least 100GB of free disk space for a checkout, 150GB for a single
+  build, and 200GB or more for multiple builds. If you employ ccache, you will
+  need even more space.</p>
+  </li>
+
+  <li>
+  Python 2.6 -- 2.7, which you can download from <a href="http://www.python.org/download/">python.org</a>.</p>
+  </li>
+
+  <li>
+  GNU Make 3.81 -- 3.82, which you can download from <a href="http://ftp.gnu.org/gnu/make/">gnu.org</a>,</p>
+  </li>
+
+  <li>
+  JDK 7 to build the master branch of Android in the <a
+  href="https://android.googlesource.com/">Android Open Source Project
+  (AOSP)</a>; JDK 6 to build Gingerbread through KitKat; JDK 5 for Cupcake through
+  Froyo. See <a href="initializing.html">Initializing a Build Environment</a>
+  for installation instructions by operating system.</p>
+  </li>
+
+  <li>
+  Git 1.7 or newer. You can find it at <a href="http://git-scm.com/download">git-scm.com</a>.</p>
+  </li>
+
+</ul>
diff --git a/src/source/building-devices.jd b/src/source/running.jd
similarity index 96%
rename from src/source/building-devices.jd
rename to src/source/running.jd
index f0d978e..393bb16 100644
--- a/src/source/building-devices.jd
+++ b/src/source/running.jd
@@ -1,4 +1,4 @@
-page.title=Building for devices
+page.title=Running Builds
 @jd:body
 
 <!--
@@ -25,7 +25,7 @@
 </div>
 
 <p>This page complements the main page about
-<a href="building-running.html">Building and Running</a> with
+<a href="building.html">Building the System</a> with
 information that is specific to individual devices.</p>
 
 <h2 class="nexus-devices">Nexus devices</h2>
@@ -54,7 +54,8 @@
 <h2 id="building-fastboot-and-adb">Building fastboot and adb</h2>
 <p>If you don't already have those tools, fastboot and adb can be built with
 the regular build system. Follow the instructions on the page about
-<a href="building-running.html">Building and Running</a>, and replace the main <code>make</code> command with</p>
+<a href="building.html">Building a System</a>, and replace the main
+<code>make</code> command with:</p>
 <pre><code>$ make fastboot adb
 </code></pre>
 
@@ -194,8 +195,6 @@
 <pre><code>$ make clobber
 </code></pre>
 <h2 id="picking-and-building-the-configuration-that-matches-a-device">Picking and building the configuration that matches a device</h2>
-<p>The steps to configure and build the Android Open Source Project
-are described in the <a href="building.html">Building</a> page.</p>
 <p>The recommended builds for the various devices are available through
 the lunch menu, accessed when running the <code>lunch</code> command with no arguments. Factory images and binaries for Nexus devices can be downloaded from:</p>
 <p><a href="https://developers.google.com/android/nexus/images">https://developers.google.com/android/nexus/images</a></p>
diff --git a/src/source/source_toc.cs b/src/source/source_toc.cs
index cbe8191..52b5bac 100644
--- a/src/source/source_toc.cs
+++ b/src/source/source_toc.cs
@@ -33,18 +33,16 @@
 
   <li class="nav-section">
       <div class="nav-section-header">
-        <a href="<?cs var:toroot ?>source/building.html">
+        <a href="<?cs var:toroot ?>source/requirements.html">
           <span class="en">Downloading and Building</span>
         </a>
       </div>
        <ul>
-        <li><a href="<?cs var:toroot ?>source/initializing.html">Initializing the Build Environment</a></li>
+        <li><a href="<?cs var:toroot ?>source/initializing.html">Establishing a Build Environment</a></li>
         <li><a href="<?cs var:toroot ?>source/downloading.html">Downloading the Source</a></li>
-        <li><a href="<?cs var:toroot ?>source/configure-products.html">Configuring the Products</a></li>
-        <li><a href="<?cs var:toroot ?>source/building-running.html">Building and Running</a></li>
-        <li><a href="<?cs var:toroot ?>source/building-devices.html">Building for Devices</a></li>
+        <li><a href="<?cs var:toroot ?>source/building.html">Building the System</a></li>
+        <li><a href="<?cs var:toroot ?>source/running.html">Running Builds</a></li>
         <li><a href="<?cs var:toroot ?>source/building-kernels.html">Building Kernels</a></li>
-        <li><a href="<?cs var:toroot ?>source/64-bit-builds.html">64-bit Build Instructions</a></li>
         <li><a href="<?cs var:toroot ?>source/known-issues.html">Known Issues</a></li>
       </ul>
   </li>
@@ -57,7 +55,9 @@
           <ul>
             <li><a href="<?cs var:toroot ?>source/using-repo.html">Using Repo</a></li>
             <li><a href="<?cs var:toroot ?>source/using-eclipse.html">Using Eclipse</a></li>
-            <li><a href="<?cs var:toroot ?>source/git-resources.html">Git Resources</a></li>
+            <li><a href="<?cs var:toroot ?>source/git-resources.html">Learning Git</a></li>
+            <li><a href="<?cs var:toroot ?>source/add-device.html">Adding a New Device</a></li>
+            <li><a href="<?cs var:toroot ?>source/64-bit-builds.html">Understanding 64-bit Builds</a></li>
           </ul>
   </li>