diff --git a/src/compatibility/contact-us.jd b/src/compatibility/contact-us.jd
index b0d0a78..6c590f5 100644
--- a/src/compatibility/contact-us.jd
+++ b/src/compatibility/contact-us.jd
@@ -43,9 +43,10 @@
 Android devices should contact their carrier or manufacturer for help.</p>
 
 <h2 id="for-business-inquiries">For licensing Google Mobile Services</h2>
-<p>Business inquiries about licensing Google Mobile Services can be sent to <a
-href="mailto:android-partnerships@google.com">android-partnerships@google.com</a>.
+<p>Please send inquiries about licensing Google Mobile Services through the <a
+href="https://docs.google.com/a/google.com/forms/d/1qAHuR-MbmXeYuJ1aBd3neaUjNGxnnnCd2kzb0MEJpGQ/viewform"
+target="_blank">GMS Inquiry</a> form. Other non-GMS partnership inquiries can be sent to <a
+href="mailto:android-partnerships@google.com">android-partnerships@google.com</a>
 
-<p>While we read every email that
-is received at the android-partnerships alias, we cannot respond to each of them.
-But we promise to contact you if we can help!</p>
+<p>While we read every message received, we cannot respond to each of them. We
+promise to contact you if we can help!</p>
diff --git a/src/devices/devices_toc.cs b/src/devices/devices_toc.cs
index 491ca1a..1c622d6 100644
--- a/src/devices/devices_toc.cs
+++ b/src/devices/devices_toc.cs
@@ -317,8 +317,8 @@
               </a>
             </div>
             <ul>
-              <li><a href="<?cs var:toroot ?>devices/tech/security/secureboot/verified-boot.html">Verified boot</a></li>
-              <li><a href="<?cs var:toroot ?>devices/tech/security/secureboot/block-ota.html">Block-based OTA</a></li>
+              <li><a href="<?cs var:toroot ?>devices/tech/security/secureboot/verified-boot.html">Verifying boot</a></li>
+              <li><a href="<?cs var:toroot ?>devices/tech/security/secureboot/dm-verity.html">Implementing dm-verity</a></li>
             </ul>
           </li>
           <li class="nav-section">
diff --git a/src/devices/tech/security/overview/acknowledgements.jd b/src/devices/tech/security/overview/acknowledgements.jd
index d773c9a..6fe71f8 100644
--- a/src/devices/tech/security/overview/acknowledgements.jd
+++ b/src/devices/tech/security/overview/acknowledgements.jd
@@ -24,6 +24,14 @@
 for the <a href="https://www.google.com/about/appsecurity/patch-rewards/">Patch
 Rewards</a> program.</p>
 
+<h2>2015</h2>
+
+<div style="LINE-HEIGHT:25px;">
+
+<p><a href="mailto:higongguang@gmail.com">Guang Gong</a> of <a href="http://www.360safe.com/">Qihoo 360 Technology Co. Ltd</a> (<a href="https://twitter.com/oldfresher">@oldfresher</a>)</p>
+
+</div>
+
 <h2>2014</h2>
 
 <div style="LINE-HEIGHT:25px;">
diff --git a/src/devices/tech/security/secureboot/dm-verity.jd b/src/devices/tech/security/secureboot/dm-verity.jd
new file mode 100644
index 0000000..f86c1b2
--- /dev/null
+++ b/src/devices/tech/security/secureboot/dm-verity.jd
@@ -0,0 +1,235 @@
+page.title=Implementing dm-verity
+@jd:body
+
+<!--
+    Copyright 2015 The Android Open Source Project
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+-->
+<div id="qv-wrapper">
+  <div id="qv">
+    <h2>In this document</h2>
+    <ol id="auto-toc">
+    </ol>
+  </div>
+</div>
+
+<h2 id="operation">Operation</h2>
+
+<p>dm-verity protection lives in the kernel. So if rooting software compromises the 
+system before the kernel comes up, it will retain that access. To mitigate this 
+risk, most manufacturers verify the kernel using a key burned into the device. 
+That key is not changeable once the device leaves the factory.</p>
+
+<p>Manufacturers use that key to verify the signature on the first-level 
+bootloader, which in turn verifies the signature on subsequent levels, the 
+application bootloader and eventually the kernel. Each manufacturer wishing to 
+take advantage of <a href="verified-boot.html">verified boot</a> should have a
+method for verifying the integrity of the kernel. Assuming the kernel has been
+verified, the kernel can look at a block device and verify it as it is mounted.</p>
+
+<p>One way of verifying a block device is to directly hash its contents and compare 
+them to a stored value. However, attempting to verify an entire block device can 
+take an extended period and consume much of a device's power. Devices would take 
+long periods to boot and then be significantly drained prior to use.</p>
+
+<p>Instead, dm-verity verifies blocks individually and only when each one is 
+accessed. When read into memory, the block is hashed in parallel. The hash is 
+then verified up the tree. And since reading the block is such an expensive 
+operation, the latency introduced by this block-level verification is 
+comparatively nominal.</p>
+
+<p>If verification fails, the device generates an I/O error indicating the block 
+cannot be read. It will appear as if the filesystem has been corrupted, as is 
+expected.</p>
+
+<p>Applications may choose to proceed without the resulting data, such as when 
+those results are not required to the application's primary function. However, 
+if the application cannot continue without the data, it will fail.</p>
+
+<h2 id="implementation">Implementation</h2>
+
+<h3 id="summary">Summary</h3>
+
+<ol>
+<li>Generate an ext4 system image.</li>
+<li><a href="#hash-tree">Generate a hash tree</a> for that image.</li>
+<li><a href="#mapping-table">Build a dm-verity table</a> for that hash tree.</li>
+<li><a href="#signing">Sign that dm-verity table</a> to produce a table 
+signature.</li>
+<li><a href="#metadata">Bundle the table signature</a> and dm-verity table 
+into verity metadata.</li>
+<li>Concatenate the system image, the verity metadata, and the hash tree.</li>
+</ol>
+
+<p>See the <a href="http://www.chromium.org/chromium-os/chromiumos-design-docs/verified-boot">The Chromium Projects - Verified 
+Boot</a> 
+for a detailed description of the hash tree and dm-verity table.</p>
+
+<h3 id="hash-tree">Generating the hash tree</h3>
+
+<p>As described in the <a href="#introduction">Introduction</a>, the hash tree is 
+integral to dm-verity. The 
+<a href="https://code.google.com/p/cryptsetup/wiki/DMVerity">cryptsetup</a> tool will 
+generate a hash tree for you. Alternatively, a compatible one is defined here:</p>
+
+<pre>
+&lt;your block device name&gt; &lt;your block device name&gt; &lt;block size&gt; &lt;block size&gt; &lt;image size in blocks&gt; &lt;image size in blocks + 8&gt; &lt;root hash&gt; &lt;salt&gt;
+</pre>
+
+<p>To form the hash, the system image is split at layer 0 into 4k blocks, each 
+assigned a SHA256 hash. Layer 1 is formed by joining only those SHA256 hashes 
+into 4k blocks, resulting in a much smaller image. Layer 2 is formed 
+identically, with the SHA256 hashes of Layer 1.</p>
+
+<p>This is done until the SHA256 hashes of the previous layer can fit in a single 
+block. When get the SHA256 of that block, you have the root hash of the tree. </p>
+
+<p>The size of the hash tree (and corresponding disk space usage) varies with the 
+size of the verified partition. In practice, the size of hash trees tends to be 
+small, often less than 30 MB.</p>
+
+<p>If you have a block in a layer that isn't completely filled naturally by the 
+hashes of the previous layer, you should pad it with zeroes to achieve the 
+expected 4k. This allows you to know the hash tree hasn't been removed and is 
+instead completed with blank data.</p>
+
+<p>To generate the hash tree, concatenate the layer 2 hashes onto those for layer 
+1, the layer 3 the hashes onto those of layer 2, and so on. Write all of this 
+out to disk. Note that this doesn't reference layer 0 of the root hash.</p>
+
+<p>To recap, the general algorithm to construct the hash tree is as follows:</p>
+
+<ol>
+<li>Choose a random salt (hexadecimal encoding).</li>
+<li>Unsparse your system image into 4k blocks.</li>
+<li>For each block, get its (salted) SHA256 hash.</li>
+<li>Concatenate these hashes to form a level</li>
+<li>Pad the level with 0s to a 4k block boundary.</li>
+<li>Concatenate the level to your hash tree.</li>
+<li>Repeat steps 2-6 using the previous level as the source for the next until 
+you have only a single hash.</li>
+</ol>
+
+<p>The result of this is a single hash, which is your root hash. This and your salt 
+are used during the construction of your dm-verity mapping hash table.</p>
+
+<h3 id="mapping-table">Building the dm-verity mapping table</h3>
+
+<p>Build the dm-verity mapping table, which identifies the block device (or target) 
+for the kernel and the location of the hash tree (which is the same value.) This 
+mapping is used for <code>fstab</code> generation and booting. The table also identifies 
+the size of the blocks and the hash_start, or the offset in hash size blocks 
+(length of layer 0).</p>
+
+<p>See <a href="https://code.google.com/p/cryptsetup/wiki/DMVerity">cryptsetup</a> for a 
+detailed description of the verity target mapping table fields.</p>
+
+<h3 id="signing">Signing the dm-verity table</h3>
+
+<p>Sign the dm-verity table to produce a table signature. When verifying a 
+partition, the table signature is validated first. This is done against a key on 
+your boot image in a fixed location. Keys are typically included in the 
+manufacturers' build systems for automatic inclusion on devices in a fixed 
+location.</p>
+
+<p>To verify the partition with this signature and key combination:</p>
+
+<ol>
+<li>Add an RSA-2048 key in libmincrypt-compatible format to the /boot partition 
+at /verity_key. Identify the location of the key used to verify the hash 
+tree.</li>
+<li>In the fstab for the relevant entry, add 'verify' to the fs_mgr flags.</li>
+</ol>
+
+<h3 id="metadata">Bundling the table signature into metadata</h3>
+
+<p>Bundle the table signature and dm-verity table into verity metadata. The entire 
+block of metadata is versioned so it may be extended, such as to add a second 
+kind of signature or change some ordering.</p>
+
+<p>As a sanity check, a magic number is associated with each set of table metadata 
+that helps identify the table. Since the length is included in the ext4 system 
+image header, this provides a way to search for the metadata without knowing the 
+contents of the data itself.</p>
+
+<p>This makes sure you haven't elected to verify an unverified partition. If so, 
+the absence of this magic number will halt the verification process. This number 
+resembles:<br/>
+0xb001b001</p>
+
+<p>The byte values in hex are:</p>
+
+<ul>
+<li>first byte = b0</li>
+<li>second byte = 01</li>
+<li>third byte = b0</li>
+<li>fourth byte = 01</li>
+</ul>
+
+<p>The following diagram depicts the breakdown of the verity metadata:</p>
+
+<pre>&lt;magic number&gt;|&lt;version&gt;|&lt;signature&gt;|&lt;table length&gt;|&lt;table&gt;|&lt;padding&gt;
+\-------------------------------------------------------------------/
+\----------------------------------------------------------/   |
+                            |                                  |
+                            |                                 32K
+                       block content
+</pre>
+
+<p>And this table describes those metadata fields.</p>
+
+<table>
+<tr>
+<th>Field</th>
+<th>Purpose</th>
+<th>Size</th>
+<th>Value</th>
+</tr>
+<tr>
+<td>magic number</td>
+<td>used by fs_mgr as a sanity check</td>
+<td>4 bytes</td>
+<td>0xb001b001</td>
+</tr>
+<tr>
+<td>version</td>
+<td>used to version the metadata block</td>
+<td>4 bytes</td>
+<td>currently 0</td>
+</tr>
+<tr>
+<td>signature</td>
+<td>the signature of the table in PKCS1.5 padded form</td>
+<td>256 bytes</td>
+<td></td>
+</tr>
+<tr>
+<td>table length</td>
+<td>the length of the dm-verity table in bytes</td>
+<td>4 bytes</td>
+<td></td>
+</tr>
+<tr>
+<td>table</td>
+<td>the dm-verity table described earlier</td>
+<td>`table length` bytes</td>
+<td></td>
+</tr>
+<tr>
+<td>padding</td>
+<td>this structure is 0-padded to 32k in length</td>
+<td></td>
+<td>0</td>
+</tr>
+</table>
diff --git a/src/devices/tech/security/secureboot/index.jd b/src/devices/tech/security/secureboot/index.jd
index 1857bbd..d26b1c8 100644
--- a/src/devices/tech/security/secureboot/index.jd
+++ b/src/devices/tech/security/secureboot/index.jd
@@ -2,7 +2,7 @@
 @jd:body
 
 <!--
-    Copyright 2014 The Android Open Source Project
+    Copyright 2015 The Android Open Source Project
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
@@ -58,39 +58,6 @@
 externally by the OEM. That key is used to verify the signature for that hash 
 and confirm the device's system partition is protected and unchanged.</p>
 
-<h2 id="operation">Operation</h2>
-
-<p>dm-verity protection lives in the kernel. So if rooting software compromises the 
-system before the kernel comes up, it will retain that access. To mitigate this 
-risk, most manufacturers verify the kernel using a key burned into the device. 
-That key is not changeable once the device leaves the factory.</p>
-
-<p>Manufacturers use that key to verify the signature on the first-level 
-bootloader, which in turn verifies the signature on subsequent levels, the 
-application bootloader and eventually the kernel. Each manufacturer wishing to 
-take advantage of <a href="verified-boot.html">verified boot</a> should have a
-method for verifying the integrity of the kernel. Assuming the kernel has been
-verified, the kernel can look at a block device and verify it as it is mounted.</p>
-
-<p>One way of verifying a block device is to directly hash its contents and compare 
-them to a stored value. However, attempting to verify an entire block device can 
-take an extended period and consume much of a device's power. Devices would take 
-long periods to boot and then be significantly drained prior to use.</p>
-
-<p>Instead, dm-verity verifies blocks individually and only when each one is 
-accessed. When read into memory, the block is hashed in parallel. The hash is 
-then verified up the tree. And since reading the block is such an expensive 
-operation, the latency introduced by this block-level verification is 
-comparatively nominal.</p>
-
-<p>If verification fails, the device generates an I/O error indicating the block 
-cannot be read. It will appear as if the filesystem has been corrupted, as is 
-expected.</p>
-
-<p>Applications may choose to proceed without the resulting data, such as when 
-those results are not required to the application's primary function. However, 
-if the application cannot continue without the data, it will fail.</p>
-
 <h2 id="prerequisites">Prerequisites</h2>
 
 <h3 id="verified-boot">Establishing a verified boot flow</h3>
@@ -100,200 +67,21 @@
 <h3 id="block-otas">Switching to block-oriented OTAs</h3>
 <p>To enable dm-verity for a device, you must use block-based over-the-air
 (OTA) updates to ensure all devices use the same system partition. For details,
-see <a href="block-ota.html">Block-Based OTAs</a>.</p>
+see <a href="../ota/block.html">Block-Based OTAs</a>.</p>
 
 <h3 id="config-dm-verity">Configuring dm-verity</h3>
 
-<p>After switching to block-oriented OTAs, incorporate the latest Android kernel or 
-use a stock upstream kernel and enable dm-verity support by including the 
+<p>After switching to block-oriented OTAs, incorporate the latest Android kernel or
+use a stock upstream kernel and enable dm-verity support by including the
 relevant configuration option:<br/>
 <code>CONFIG_DM_VERITY
 </code></p>
-<p>When using the Android kernel, dm-verity is turned on when the kernel is built.</p>
-
-<h2 id="implementation">Implementation</h2>
-
-<h3 id="summary">Summary</h3>
-
-<ol>
-<li>Generate an ext4 system image.</li>
-<li><a href="#hash-tree">Generate a hash tree</a> for that image.</li>
-<li><a href="#mapping-table">Build a dm-verity table</a> for that hash tree.</li>
-<li><a href="#signing">Sign that dm-verity table</a> to produce a table 
-signature.</li>
-<li><a href="#metadata">Bundle the table signature</a> and dm-verity table 
-into verity metadata.</li>
-<li>Concatenate the system image, the verity metadata, and the hash tree.</li>
-</ol>
-
-<p>See the <a href="http://www.chromium.org/chromium-os/chromiumos-design-docs/verified-boot">The Chromium Projects - Verified 
-Boot</a> 
-for a detailed description of the hash tree and dm-verity table.</p>
-
-<h3 id="hash-tree">Generating the hash tree</h3>
-
-<p>As described in the <a href="#introduction">Introduction</a>, the hash tree is 
-integral to dm-verity. The 
-<a href="https://code.google.com/p/cryptsetup/wiki/DMVerity">cryptsetup</a> tool will 
-generate a hash tree for you. Alternatively, a compatible one is defined here:</p>
-
-<pre>
-&lt;your block device name&gt; &lt;your block device name&gt; &lt;block size&gt; &lt;block size&gt; &lt;image size in blocks&gt; &lt;image size in blocks + 8&gt; &lt;root hash&gt; &lt;salt&gt;
-</pre>
-
-<p>To form the hash, the system image is split at layer 0 into 4k blocks, each 
-assigned a SHA256 hash. Layer 1 is formed by joining only those SHA256 hashes 
-into 4k blocks, resulting in a much smaller image. Layer 2 is formed 
-identically, with the SHA256 hashes of Layer 1.</p>
-
-<p>This is done until the SHA256 hashes of the previous layer can fit in a single 
-block. When get the SHA256 of that block, you have the root hash of the tree. </p>
-
-<p>The size of the hash tree (and corresponding disk space usage) varies with the 
-size of the verified partition. In practice, the size of hash trees tends to be 
-small, often less than 30 MB.</p>
-
-<p>If you have a block in a layer that isn't completely filled naturally by the 
-hashes of the previous layer, you should pad it with zeroes to achieve the 
-expected 4k. This allows you to know the hash tree hasn't been removed and is 
-instead completed with blank data.</p>
-
-<p>To generate the hash tree, concatenate the layer 2 hashes onto those for layer 
-1, the layer 3 the hashes onto those of layer 2, and so on. Write all of this 
-out to disk. Note that this doesn't reference layer 0 of the root hash.</p>
-
-<p>To recap, the general algorithm to construct the hash tree is as follows:</p>
-
-<ol>
-<li>Choose a random salt (hexadecimal encoding).</li>
-<li>Unsparse your system image into 4k blocks.</li>
-<li>For each block, get its (salted) SHA256 hash.</li>
-<li>Concatenate these hashes to form a level</li>
-<li>Pad the level with 0s to a 4k block boundary.</li>
-<li>Concatenate the level to your hash tree.</li>
-<li>Repeat steps 2-6 using the previous level as the source for the next until 
-you have only a single hash.</li>
-</ol>
-
-<p>The result of this is a single hash, which is your root hash. This and your salt 
-are used during the construction of your dm-verity mapping hash table.</p>
-
-<h3 id="mapping-table">Building the dm-verity mapping table</h3>
-
-<p>Build the dm-verity mapping table, which identifies the block device (or target) 
-for the kernel and the location of the hash tree (which is the same value.) This 
-mapping is used for <code>fstab</code> generation and booting. The table also identifies 
-the size of the blocks and the hash_start, or the offset in hash size blocks 
-(length of layer 0).</p>
-
-<p>See <a href="https://code.google.com/p/cryptsetup/wiki/DMVerity">cryptsetup</a> for a 
-detailed description of the verity target mapping table fields.</p>
-
-<h3 id="signing">Signing the dm-verity table</h3>
-
-<p>Sign the dm-verity table to produce a table signature. When verifying a 
-partition, the table signature is validated first. This is done against a key on 
-your boot image in a fixed location. Keys are typically included in the 
-manufacturers' build systems for automatic inclusion on devices in a fixed 
-location.</p>
-
-<p>To verify the partition with this signature and key combination:</p>
-
-<ol>
-<li>Add an RSA-2048 key in libmincrypt-compatible format to the /boot partition 
-at /verity_key. Identify the location of the key used to verify the hash 
-tree.</li>
-<li>In the fstab for the relevant entry, add 'verify' to the fs_mgr flags.</li>
-</ol>
-
-<h3 id="metadata">Bundling the table signature into metadata</h3>
-
-<p>Bundle the table signature and dm-verity table into verity metadata. The entire 
-block of metadata is versioned so it may be extended, such as to add a second 
-kind of signature or change some ordering.</p>
-
-<p>As a sanity check, a magic number is associated with each set of table metadata 
-that helps identify the table. Since the length is included in the ext4 system 
-image header, this provides a way to search for the metadata without knowing the 
-contents of the data itself.</p>
-
-<p>This makes sure you haven't elected to verify an unverified partition. If so, 
-the absence of this magic number will halt the verification process. This number 
-resembles:<br/>
-0xb001b001</p>
-
-<p>The byte values in hex are:</p>
-
-<ul>
-<li>first byte = b0</li>
-<li>second byte = 01</li>
-<li>third byte = b0</li>
-<li>fourth byte = 01</li>
-</ul>
-
-<p>The following diagram depicts the breakdown of the verity metadata:</p>
-
-<pre>&lt;magic number&gt;|&lt;version&gt;|&lt;signature&gt;|&lt;table length&gt;|&lt;table&gt;|&lt;padding&gt;
-\-------------------------------------------------------------------/
-\----------------------------------------------------------/   |
-                            |                                  |
-                            |                                 32K
-                       block content
-</pre>
-
-<p>And this table describes those metadata fields.</p>
-
-<table>
-<tr>
-<th>Field</th>
-<th>Purpose</th>
-<th>Size</th>
-<th>Value</th>
-</tr>
-<tr>
-<td>magic number</td>
-<td>used by fs_mgr as a sanity check</td>
-<td>4 bytes</td>
-<td>0xb001b001</td>
-</tr>
-<tr>
-<td>version</td>
-<td>used to version the metadata block</td>
-<td>4 bytes</td>
-<td>currently 0</td>
-</tr>
-<tr>
-<td>signature</td>
-<td>the signature of the table in PKCS1.5 padded form</td>
-<td>256 bytes</td>
-<td></td>
-</tr>
-<tr>
-<td>table length</td>
-<td>the length of the dm-verity table in bytes</td>
-<td>4 bytes</td>
-<td></td>
-</tr>
-<tr>
-<td>table</td>
-<td>the dm-verity table described earlier</td>
-<td>`table length` bytes</td>
-<td></td>
-</tr>
-<tr>
-<td>padding</td>
-<td>this structure is 0-padded to 32k in length</td>
-<td></td>
-<td>0</td>
-</tr>
-</table>
-
-<p>For additional assistance, contact security@android.com.</p>
+<p>When using the Android kernel, dm-verity is turned on when the kernel is built. For details, see <a href="dm-verity.html">Implementing dm-verity</a>.</p>
 
 <h2 id="supporting-docs">Supporting documentation</h2>
-
-<p><a href="verified-boot.html">Verified boot</a><br/>
-<a href="block-ota.html">Block-based OTAs</a><br/>
+<p><a href="verified-boot.html">Verifying Boot</a><br/>
+<a href="../ota/block.html">Block-Based OTA</a><br/>
+<a href="dm-verity.html">Implementing dm-verity</a><br/>
 <a href="https://code.google.com/p/cryptsetup/wiki/DMVerity">cryptsetup - dm-verity: device-mapper block integrity checking 
 target</a><br/>
 <a href="http://www.chromium.org/chromium-os/chromiumos-design-docs/verified-boot">The Chromium Projects - Verified 
@@ -301,3 +89,5 @@
 <a
 href="http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=blob;f=Documentation/device-mapper/verity.txt">Linux Kernel Documentation: 
 verity.txt</a></p>
+
+<p>For additional assistance, contact <a href="mailto:security@android.com">security@android.com</a>.</p>
diff --git a/src/devices/tech/security/secureboot/verified-boot.jd b/src/devices/tech/security/secureboot/verified-boot.jd
index e8a72c4..85c0a34 100644
--- a/src/devices/tech/security/secureboot/verified-boot.jd
+++ b/src/devices/tech/security/secureboot/verified-boot.jd
@@ -1,4 +1,4 @@
-page.title=Verified boot
+page.title=Verifying Boot
 @jd:body
 
 <!--
diff --git a/src/index.jd b/src/index.jd
index 1acaab0..63a35f2 100644
--- a/src/index.jd
+++ b/src/index.jd
@@ -41,6 +41,20 @@
   <div class="landing-docs">
     <div class="col-8">
     <h3>What's New</h3>
+<a href="{@docRoot}source/build-numbers.html">
+        <h4>Lollipop API level, build tag updated</h4></a>
+        <p>The latest <strong><a
+        href="{@docRoot}source/build-numbers.html#platform-code-names-versions-api-levels-and-ndk-releases">Lollipop
+        API level</a></strong> and <strong><a
+        href="{@docRoot}source/build-numbers.html#source-code-tags-and-builds">build
+        tag</a></strong> have been updated to 22 and LMY47D, respectively.</p>
+
+<a href="{@docRoot}compatibility/contact-us.html">
+        <h4>Google Mobile Services inquiry form added</h4></a>
+        <p>Prospective Google Mobile Services (GMS) partners now have an online <strong><a
+        href="https://docs.google.com/a/google.com/forms/d/1qAHuR-MbmXeYuJ1aBd3neaUjNGxnnnCd2kzb0MEJpGQ/viewform"
+        target="_blank">inquiry form</a></strong> to request a GMS license.</p>
+
 <a href="{@docRoot}devices/tech/dalvik/constraints.html">
         <h4>Dalvik constraints published</h4></a>
         <p>The Android Runtime (ART) team has released a list of syntactical and semantical <strong><a
@@ -71,24 +85,6 @@
         <strong><a href="{@docRoot}source/using-eclipse.html#create-project">Creating a
         project section of Using Eclipse</a></strong> has been revised to replace an
         outdated step.</p>
-
-<a href="{@docRoot}devices/tech/security/selinux/index.html">
-        <h4>SELinux instructions revised</h4></a>
-        <p>The entire set of <strong><a
-        href="{@docRoot}devices/tech/security/selinux/index.html">Security-Enhanced
-        Linux</a></strong> instructions have been revised thanks to open source
-        contributions.</p>
-
-<a href="{@docRoot}compatibility/index.html">
-        <h4>Compatibility manual and CTS updated, CDD source made available</h4></a>
-        <p> New versions of the <strong><a
-        href="{@docRoot}compatibility/downloads.html">Compatibility Test Suite
-        (5.0_r2)</a></strong> and the <strong><a
-        href="{@docRoot}compatibility/android-cts-manual.pdf">CTS Manual</a></strong>
-        have been uploaded to the site. HTML versions of the <strong><a
-        href="https://android.googlesource.com/platform/docs/source.android.com/+/master/src/compatibility/">Compatibility
-        Definition Documents (CDD)</a></strong> have been uploaded to AOSP for easy
-        diffing.</p>
     </div>
 
     <div class="col-8">
diff --git a/src/source/build-numbers.jd b/src/source/build-numbers.jd
index 57ff7c8..9088d95 100644
--- a/src/source/build-numbers.jd
+++ b/src/source/build-numbers.jd
@@ -42,8 +42,8 @@
 <tbody>
 <tr>
 <td>Lollipop</td>
-<td>5.0</td>
-<td>API level 21</td>
+<td>5.0 - 5.1</td>
+<td>API level 21, 22</td>
 </tr>
 <tr>
 <td>KitKat</td>
@@ -173,6 +173,12 @@
 <th>Supported devices</th>
 </tr>
 <tr>
+  <td>LMY47D</td>
+  <td>android-5.1.0_r1</td>
+  <td>Lollipop</td>
+  <td>Nexus 5, Nexus 6, Nexus 7 (grouper), Nexus 10</td>
+</tr>
+<tr>
   <td>LRX22G</td>
   <td>android-5.0.2_r1</td>
   <td>Lollipop</td>