src/devices/audio/midi_test.jd

page.title=MIDI Test Procedure
@jd:body

<!--
    Copyright 2015 The Android Open Source Project

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

        http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
-->

<div id="qv-wrapper">
  <div id="qv">
    <h2>In this document</h2>
    <ol id="auto-toc">
    </ol>
  </div>
</div>

<p>These tests may be used to validate the MIDI feature on Android devices.
Successful execution of these tests is a prerequisite to
<a href="midi.html#claim-feature">claim the MIDI feature</a>.
</p>

<h2 id="preparation">Preparation</h2>


<h3 id="hardware">Hardware</h3>

<p>
The following hardware is needed for the tests.
</p>

<ul>
  <li> MIDI keyboard with USB connector, e.g. the <a href="http://www.akaipro.com/product/lpk25">Akai LPK25</a></li>
  <li> MIDI keyboard with Bluetooth Low Energy (BLE) support, e.g. the <a href="http://miselu.com/">Miselu C.24</a></li>
  <li> USB cables</li>
  <li> USB On-The-Go (OTG) adapter to convert a female USB-A to male micro-USB or USB-C</li>
  <li> Android device running Android 6.0 Marshmallow or later release</li>
  <li> Optional: desktop computer</li>
</ul>

<h3 id="apps">Apps</h3>


<p>Several apps are used by this test procedure:</p>

<table>
<tr>
  <th>App</th>
  <th>Description</th>
</tr>
<tr>
  <td><a href="https://github.com/philburk/android-midisuite/tree/master/MidiScope">MidiScope</a> or
    <a href="https://github.com/googlesamples/android-MidiScope">MidiScope</a></td>
  <td>displays MIDI messages on-screen</td>
</tr>
<tr>
  <td><a href="https://github.com/philburk/android-midisuite/tree/master/MidiKeyboard">MidiKeyboard</a></td>
  <td>sends MIDI messages by pressing an on-screen music keyboard</td>
</tr>
<tr>
  <td><a href="https://github.com/philburk/android-midisuite/tree/master/MidiSynthExample">MidiSynthExample</a> or
    <br /><a href="https://github.com/googlesamples/android-MidiSynth">MidiSynth</a></td>
  <td>simple MIDI synthesizer that uses sawtooth oscillators</td>
</tr>
<tr>
  <td><a href="https://github.com/philburk/android-midisuite/tree/master/MidiBtlePairing">MidiBtlePairing</a></td>
  <td>pairs an Android device with a BLE peripheral</td>
</tr>
<tr>
  <td><a href="https://github.com/philburk/android-midisuite/tree/master/MidiTools">MidiTools</a></td>
  <td>library dependency of the above apps</td>
</tr>
</table>

<p>
Most of these apps are part of the GitHub project
<a href="https://github.com/philburk/android-midisuite">android-midisuite</a>.
</p>

<p>Each test has a list of apps that are used. After building each app, you can install the app using
<a href="http://developer.android.com/tools/help/adb.html">Android Debug Bridge</a> (ADB).
For example, to install the <em>MidiScope</em> app:</p>

<ol>
  <li> Use a workstation with ADB installed.</li>
  <li> Connect a USB cable from the workstation to the Android device.</li>
  <li> You may need to allow the USB connection on the Android device; see <a href="midi.html#usb-peripheral">USB peripheral mode</a></li>
  <li> On the workstation, enter:</li>
</ol>

<pre>
cd <em>&lt;this-folder&gt;</em>
adb install -r MidiScope.apk
</pre>


<h2 id="virtual_synth_tests">Virtual synth tests</h2>


<p>Note that a MIDI input port can have only one connection. So if another app is
already using an input port, that port will not be available. If you cannot connect to
an input port then try closing other apps.</p>

<p>Hardware needed: Android device under test</p>

<h3 id="simple_connection">Simple connection</h3>


<p>Apps needed: <em>MidiKeyboard</em>, <em>MidiSynthExample</em></p>

<p>This tests device enumeration, virtual devices, port connections, and message
sending.</p>

<ol>
  <li> Adjust volume on Android device to about halfway.</li>
  <li> Orient phone in landscape mode.</li>
  <li> Launch <em>MidiKeyboard</em> app.</li>
  <li> Select <strong>SynthExample</strong> from the spinner menu.</li>
  <li> Play keys. You should hear notes being played in the <em>SynthExample</em> app.</li>
  <li> Exit the application by pressing the <strong>Back</strong> button so that the port will be
closed.</li>
</ol>

<h2 id="host_mode">USB test: host mode</h2>


<p>Hardware needed: USB MIDI keyboard, USB cable, OTG adapter</p>

<p>Repeat these tests several times. We have seen the USB stack crash hard on some
prototype devices if devices were plugged in and unplugged a few times.</p>

<h3 id="keyboard_already_plugged_in">Keyboard already plugged in</h3>


<p>Apps needed: <em>MidiSynthExample</em> or <em>MidiScope</em></p>

<p>This tests USB MIDI in host mode.</p>

<ol>
  <li> Adjust volume on Android device to about halfway.</li>
  <li> Plug in USB keyboard using the OTG adapter.</li>
  <li> Launch <em>SynthExample</em> app or the <em>MidiScope</em> app.</li>
  <li> From the menu select  the USB keyboard. It will display the brand.</li>
  <li> Play notes on the keyboard. If you ran <em>SynthExample</em> then you should hear notes
being played on the phone. If you ran <em>MidiScope</em> then you should see <em>NoteOn</em> and
<em>NoteOff</em> messages on-screen.</li>
  <li> Unplug the keyboard. The <em>Sender for Synth</em> menu should display <em>- - - - -</em>.</li>
  <li> Exit the application by pressing the <strong>Back</strong> button.</li>
</ol>

<h3 id="hot_plug_usb_keyboard">Hot-plug USB keyboard</h3>


<p>Apps needed: <em>MidiSynthExample</em> or <em>MidiScope</em></p>

<p>This tests USB MIDI in host mode.</p>

<ol>
  <li> Adjust volume on Android device to about halfway.</li>
  <li> Make sure there is not a USB MIDI keyboard plugged in.</li>
  <li> Launch <em>SynthExample</em> app.</li>
  <li> At middle, next to <em>Sender for Synth</em>, look in menu. You should not see the USB
keyboard listed.</li>
  <li> Plug in USB keyboard using the OTG adapter.</li>
  <li> At middle, next to <em>Sender for Synth</em>, select the USB keyboard. It will display
the brand.</li>
  <li> Play notes on the keyboard. You should hear notes being played on the phone.</li>
  <li> At middle, next to <em>Sender for Synth</em>, select <strong>- - - - -</strong>.</li>
  <li> Play notes on the keyboard. You should hear nothing.</li>
  <li> At middle, next to <em>Sender for Synth</em>, select the USB keyboard. It will display
the brand.</li>
  <li> Play notes on the keyboard. You should hear notes being played on the phone.</li>
  <li> Unplug the synthesizer. The <em>Sender for Synth</em> menu should display <em>- - - - -</em>.</li>
  <li>  Exit the application by pressing the <strong>Back</strong> button.</li>
</ol>

<h2 id="peripheral_mode">USB test: peripheral mode</h2>


<p>Hardware needed: USB cable, OTG adapter</p>

<h3 id="android_to_android">Android-to-Android</h3>


<p>Apps needed: <em>MidiKeyboard</em> on Android device under test, <em>MidiScope</em> on another
Android device.</p>

<p>Use Android devices as a peripheral controller for another Android device. To help test
this mode, use another Android device running in host mode. Note that
you could modify the test to work with a desktop computer running Digital Audio Workstation (DAW)
software such as
GarageBand.</p>

<ol>
  <li> Connect the USB cable to the Android device under test (Android device <strong>A</strong>).</li>
  <li> Use an OTG adapter to connect the other end of the cable to a second Android
device <strong>B</strong> that operates in host mode.</li>
  <li> On Android device A:
  <ol>
    <li> Drag finger down from top of screen.</li>
    <li> Select <strong>USB for Charging</strong> icon.</li>
    <li> Select <strong>MIDI</strong>.</li>
    <li> Launch <em>MidiKeyboard</em> app.</li>
    <li> Select <strong>Android USB Peripheral Port</strong> from <em>Receiver for Keys</em> menu at top.</li>
  </ol>
  </li>
  <li> On Android device B:
  <ol>
    <li> Launch <em>MidiScope</em> app.</li>
    <li> Select the other Android device as the source.</li>
  </ol>
  </li>
  <li> On Android device A:
  <ol>
    <li> Play notes on the keyboard and look for <em>NoteOn</em> and <em>NoteOff</em> on Android device B.</li>
  </ol>
  </li>
  </ol>

<h2 id="bluetooth_le_test">BLE test</h2>


<p>Hardware needed: MIDI keyboard supporting BLE</p>

<h3 id="basic_pairing_and_playing">Basic pairing and playing</h3>


<p>Apps needed: <em>MidiBtlePairing</em>, <em>MidiSynthExample</em></p>

<p>Test a keyboard connected to Android over BLE.</p>

<ol>
  <li> Reboot the Android device.</li>
  <li> Power on the BLE keyboard.<br />
       (The Miselu C.24 keyboard is powered on by pushing the button near the back so
that it pops open. The power button on the C.24 pulses blue when in pairing
mode.)</li>
  <li> Launch the <em>MidiBtlePairing</em> app. It has a <em>MIDI+BTLE</em> icon.</li>
  <li> Press the <strong>Bluetooth Scan</strong> button.</li>
  <li> Select desired BLE peripheral.</li>
  <li> The app should return to the main page, and you should see the peripheral listed. If
you are using a C.24, then you will notice that the light should turn green on
the C.24 to indicate paired mode.</li>
  <li> Exit the app by pressing the <strong>Home</strong> button, not the <strong>Back</strong> button.</li>
  <li> Launch the SynthExample app.</li>
  <li> Select the BLE keyboard as the sender from the menu.</li>
  <li> You should be able to press keys on the BLE keyboard and hear notes on
Android.</li>
</ol>