diff --git a/Install-unix.txt b/Install-unix.txt
index 434f627..bd59e05 100644
--- a/Install-unix.txt
+++ b/Install-unix.txt
@@ -1,576 +1,647 @@
-UNIX/Cygwin/MinGW COMPILATION
+Download & Unpack
+  
+  ImageMagick builds on a variety of Unix and Unix-like operating systems
+  including Linux, Solaris, FreeBSD, Mac OS X, and others. A compiler is
+  required and fortunately almost all modern Unix systems have one. Download
+  ImageMagick.tar.gz from ftp.imagemagick.org or its mirrors and verify the
+  distribution against its message digest.
+  
+  Unpack the distribution it with this command:
+  
+    $magick> tar xvfz ImageMagick.tar.gz
+  
+  Now that you have the ImageMagick Unix/Linux source distribution unpacked,
+  let's configure it.
+  
+Configure
+  
+  The configure script looks at your environment and decides what it can cobble
+  together to get ImageMagick compiled and installed on your system. This
+  includes finding a compiler, where your compiler header files are located
+  (e.g. stdlib.h), and if any delegate libraries are available for ImageMagick
+  to use (e.g. JPEG, PNG, TIFF, etc.). If you are willing to accept configure's
+  default options, and build from within the source directory, you can simply
+  type:
+  
+    $magick> cd ImageMagick-6.5.9
+     $magick> ./configure
+  
+  Watch the configure script output to verify that it finds everything that
+  you think it should. Pay particular attention to the last lines of the script
+  output. For example, here is a recent report from our system:
+  
+  ImageMagick is configured as follows. Please verify that this configuration
+  matches your expectations.
+  
+    Host system type: x86_64-unknown-linux-gnu
+    Build system type: x86_64-unknown-linux-gnu
+    
+                      Option                     Value
+    ----------------------------------------------------------------------------
+    Shared libraries  --enable-shared=yes		yes
+    Static libraries  --enable-static=yes		yes
+    Module support    --with-modules=yes		yes
+    GNU ld            --with-gnu-ld=yes		yes
+    Quantum depth     --with-quantum-depth=16	16
+    High Dynamic Range Imagery
+                      --enable-hdri=no		no
+    
+    Delegate Configuration:
+    BZLIB             --with-bzlib=yes		yes
+    Autotrace         --with-autotrace=yes	yes
+    DJVU              --with-djvu=yes		no
+    DPS               --with-dps=yes		no
+    FlashPIX          --with-fpx=yes		no
+    FontConfig        --with-fontconfig=yes	yes
+    FreeType          --with-freetype=yes		yes
+    GhostPCL          None			pcl6 (unknown)
+    GhostXPS          None			gxps (unknown)
+    Ghostscript       None			gs (8.63)
+    result_ghostscript_font_dir='none'
+    Ghostscript fonts --with-gs-font-dir=default
+    Ghostscript lib   --with-gslib=yes		no (failed tests)
+    Graphviz          --with-gvc=yes		yes
+    JBIG              --with-jbig=		no
+    JPEG v1           --with-jpeg=yes		yes
+    JPEG-2000         --with-jp2=yes		yes
+    LCMS              --with-lcms=yes		yes
+    LQR               --with-lqr=yes		no
+    Magick++          --with-magick-plus-plus=yes	yes
+    OpenEXR           --with-openexr=yes		yes
+    PERL              --with-perl=yes		/usr/bin/perl
+    PNG               --with-png=yes		yes
+    RSVG              --with-rsvg=yes		yes
+    TIFF              --with-tiff=yes		yes
+    result_windows_font_dir='none'
+    Windows fonts     --with-windows-font-dir=
+    WMF               --with-wmf=yes		yes
+    X11               --with-x=			yes
+    XML               --with-xml=yes		yes
+    ZLIB              --with-zlib=yes		yes
+    
+    X11 Configuration:
+          X_CFLAGS        =
+          X_PRE_LIBS      = -lSM -lICE
+          X_LIBS          =
+          X_EXTRA_LIBS    =
+    
+    Options used to compile and link:
+      PREFIX          = /usr/local
+      EXEC-PREFIX     = /usr/local
+      VERSION         = 6.4.8
+      CC              = gcc -std=gnu99
+      CFLAGS          = -fopenmp -g -O2 -Wall -W -pthread
+      MAGICK_CFLAGS   = -fopenmp -g -O2 -Wall -W -pthread
+      CPPFLAGS        = -I/usr/local/include/ImageMagick
+      PCFLAGS         = -fopenmp
+      DEFS            = -DHAVE_CONFIG_H
+      LDFLAGS         = -lfreetype
+      MAGICK_LDFLAGS  = -L/usr/local/lib -lfreetype
+      LIBS            = -lMagickCore -llcms -ltiff -lfreetype -ljpeg
+                        -lfontconfig -lXext -lSM -lICE -lX11 -lXt -lbz2 -lz
+                        -lm -lgomp -lpthread -lltdl
+      CXX             = g++
+      CXXFLAGS        = -g -O2 -Wall -W -pthread
+  
+  You can influence choice of compiler, compilation flags, or libraries of the
+  configure script by setting initial values for variables in the configure
+  command line. These include, among others:
+  
+    CC
+        Name of C compiler (e.g. cc -Xa) to use.
 
-Note:
+    CXX
+        Name of C++ compiler to use (e.g. CC).
 
-  Platform specific notes regarding specific operating systems may be found
-  in the Platforms.txt file.  This document provides generic instructions
-  which work in most common cases.  Additional notes regarding Cygwin &
-  MinGW are provided later in this file.
+    CFLAGS
+        Compiler flags (e.g. -g -O2) to compile C code.
 
-Type:
+    CXXFLAGS
+        Compiler flags (e.g. -g -O2) to compile C++ code.
 
-    gzip -dc ImageMagick-6.5.4.tar.gz | tar xvf -
-    cd ImageMagick-6.5.4
+    CPPFLAGS
+        Include paths (.e.g. -I/usr/local) to look for header files.
 
-If you do not have gzip(1), the source for the gzip package is available
-as a shell archive at
+    LDFLAGS
+        Library paths (.e.g. -L/usr/local) to look for libraries systems that
+        support the notion of a library run-path may require an additional
+        argument in order to find shared libraries at run time. For example,
+        the Solaris linker requires an argument of the form -R/path. Some
+        Linux systems will work with -rpath /usr/local/lib, while some other
+        Linux systems who's gcc does not pass -rpath to the linker, require
+        an argument of the form -Wl,-rpath,/usr/local/lib.
 
-    ftp://ftp.gnu.org/gnu/gzip/gzip-1.2.4a.shar
-
-or as a tar archive at
-
-    ftp://ftp.gnu.org/gnu/gzip/gzip-1.2.4a.tar
-
-Use the 'configure' script to automatically configure, build, and install
-ImageMagick.  The configure script may be executed from the ImageMagick source
-directory (e.g ./configure) or from a seperate build directory by specifying
-the full path to configure (e.g.  /src/ImageMagick-6.5.4/configure).  The
-advantage of using a seperate build directory is that multiple ImageMagick
-builds may share the same ImageMagick source directory while allowing each
-build to use a unique set of options.
-
-If you are willing to accept configure's default options, and build from
-within the source directory, type:
-
-    ./configure
-
-and watch the configure script output to verify that it finds everything
-that you think it should.  If it does not, then adjust your environment
-so that it does.
-
-By default,
-
-    make install
-
-will install the package's files in `/usr/local/bin', `/usr/local/lib', etc..
-You can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PATH'.  This is valuable in case you don't
-have privileges to install under the default paths or if you want to install
-in the system directories instead.
-
-If you are not happy with configure's choice of compiler, compilation flags,
-or libraries, you can give `configure' initial values for variables by
-specifying them on the configure command line, e.g.:
-
-    ./configure CC=c99 CFLAGS=-O2 LIBS=-lposix
-
-Options which should be common to packages installed under the same directory
-heirarchy may be supplied via a 'config.site' file located under the
-installation prefix via the path ${prefix}/share/config.site where ${prefix} is
-the installation prefix.  This file is used for all packages installed under
-that prefix.  This is an example config.site file:
-
-    # Configuration values for all packages installed under this prefix
-    CC=gcc
-    CXX=c++
-    CPPFLAGS='-I/usr/local/include'
-    LDFLAGS='-L/usr/local/lib -R/usr/local/lib'
-
-When the 'config.site' file is being used to supply configuration options,
-configure will issue a message similar to:
-
-    configure: loading site script /usr/local/share/config.site
-
-The configure variables you should be aware of are:
-
-    CC          Name of C compiler (e.g. 'cc -Xa') to use
-    CXX         Name of C++ compiler to use (e.g. 'CC')
-    CFLAGS      Compiler flags (e.g. '-g -O2') to compile C code
-    CXXFLAGS    Compiler flags (e.g. '-g -O2') to compile C++ code
-    CPPFLAGS    Include paths (-I/somedir) to look for header files
-    LDFLAGS     Library paths (-L/somedir) to look for libraries
-                Systems that support the notion of a library run-path
-                may require an additional argument in order to find
-                shared libraries at run time. For example, the Solaris
-                linker requires an argument of the form '-R/somedir',
-                some Linux systems will work with '-rpath /somedir',
-                while some other Linux systems who's gcc does not pass
-                -rpath to the linker require an argument of the form
-                '-Wl,-rpath,/somedir'.
-    LIBS        Extra libraries (-lsomelib) required to link
-
-Any variable (e.g. CPPFLAGS or LDFLAGS) which requires a directory path must
-specify an absolute path rather than a relative path.
-
-Configure can usually find the X include and library files automatically, but
-if it doesn't, you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-The configure script provides a number of ImageMagick specific options.  When
-disabling an option --disable-something is equivalent to specifying
---enable-something=no and --without-something is equivalent to
---with-something=no.  The configure options are as follows (execute 'configure
---help' to see all options).
-
-Optional Features:
- --enable-ccmalloc       enable 'ccmalloc' memory debug support (default disabled)
- --enable-prof           enable 'prof' profiling support (default disabled)
- --enable-gprof          enable 'gprof' profiling support (default disabled)
- --enable-gcov           enable 'gcov' profiling support (default disabled)
- --disable-installed     disable building an installed ImageMagick
-                         (default enabled)
- --disable-largefile     disable support for large (64 bit) file offsets
-
-Optional Packages/Options:
- --with-quantum-depth    number of bits in a pixel quantum (default 8)
- --with-modules          enable support for dynamically loadable modules
- --with-cache            set pixel cache threshhold (defaults to available memory)
- --without-threads       disable threads support
- --with-frozenpaths      enable frozen delegate paths
- --without-magick-plus-plus disable build/install of Magick++
- --without-perl          disable build/install of PerlMagick
-      or
- --with-perl=PERL        use specified Perl binary to configure PerlMagick
- --with-perl-options=OPTIONS  options to pass on command-line when
-                         generating PerlMagick's Makefile from Makefile.PL
- --without-bzlib         disable BZLIB support
- --without-dps           disable Display Postscript support
- --with-fpx              enable FlashPIX support
- --with-gslib            enable Ghostscript library support
- --without-jbig          disable JBIG support
- --without-jpeg          disable JPEG support
- --without-jp2           disable JPEG v2 support
- --without-lcms          disable LCMS support
- --without-png           disable PNG support
- --without-tiff          disable TIFF support
- --without-ttf           disable TrueType support
- --without-wmf           disable WMF support
- --with-fontpath         prepend to default font search path
- --with-gs-font-dir      directory containing Ghostscript fonts
- --with-windows-font-dir directory containing MS-Windows fonts
- --without-xml           disable XML support
- --without-zlib          disable ZLIB support
- --with-x                use the X Window System
- --with-share-path=DIR   Alternate path to share directory
-                         (default share/ImageMagick)
- --with-libstdc=DIR      use libstdc++ in DIR (for GNU C++)
-
-ImageMagick options represent either features to be enabled, disabled, or
-packages to be included in the build.  When a feature is enabled (via
---enable-something), it enables code already present in ImageMagick.  When a
-package is enabled (via --with-something), the configure script will search for
-it, and if it is properly installed and ready to use (headers and built
-libraries are found by compiler) it will be included in the build.  The
-configure script is delivered with all features disabled and all packages
-enabled. In general, the only reason to disable a package is if a package
-exists but it is unsuitable for the build (perhaps an old version or not
-compiled with the right compilation flags).
-
-Several configure options require special note:
-
-  * --enable-shared: the shared libraries are built and support for
-    loading coder and process modules is enabled. Shared libraries are
-    preferred because they allow programs to share common code, making
-    the individual programs much smaller. In addition shared libraries
-    are required in order for PerlMagick to be dynamically loaded by an
-    installed PERL (otherwise an additional PERL (PerlMagick) must be
-    installed.
-
-    ImageMagick built with delegates (see MAGICK PLUG-INS below) can pose
-    additional challenges. If ImageMagick is built using static libraries (the
-    default without --enable-shared) then delegate libraries may be built as
-    either static libraries or shared libraries. However, if ImageMagick is
-    built using shared libraries, then all delegate libraries must also be
-    built as shared libraries.  Static libraries usually have the extension
-    .a, while shared libraries typically have extensions like .so, .sa, or
-    .dll. Code in shared libraries normally must compiled using a special
-    compiler option to produce Position Independent Code (PIC). The only time
-    this is not necessary is if the platform compiles code as PIC by default.
-
-    PIC compilation flags differ from vendor to vendor (gcc's is
-    -fPIC). However, you must compile all shared library source with the
-    same flag (for gcc use -fPIC rather than -fpic). While static libraries
-    are normally created using an archive tool like 'ar', shared libraries
-    are built using special linker or compiler options (e.g. -shared for gcc).
-
-    Building shared libraries often requires subtantial hand-editing of
-    Makefiles and is only recommended for those who know what they are doing.
-
-    If --enable-shared is not specified, a new PERL interpreter (PerlMagick)
-    is built which is statically linked against the PerlMagick extension. This
-    new interpreter is installed into the same directory as the ImageMagick
-    utilities. If --enable-shared is specified, the PerlMagick extension is
-    built as a dynamically loadable object which is loaded into your current
-    PERL interpreter at run-time. Use of dynamically-loaded extensions is
-    preferable over statically linked extensions so --enable-shared should
-    be specified if possible (note that all libraries used with ImageMagick
-    must be shared libraries!).
-
-  * --disable-static: static archive libraries (with extension .a)
-    are not built.  If you are building shared libraries, there is little
-    value to building static libraries. Reasons to build static libraries
-    include: 1) they can be easier to debug; 2) the clients do not have
-    external dependencies (i.e. libMagick.so); 3) building PIC versions
-    of the delegate libraries may take additional expertise and effort; 4)
-    you are unable to build shared libraries.
-
-  * --disable-installed: By default the ImageMagick build is
-    configured to formally install into a directory tree.  This is the
-    most secure and reliable way to install ImageMagick.  Specifying
-    --disable-installed configures ImageMagick so that it doesn't use
-    hard-coded paths and locates support files by computing an offset path
-    from the executable (or from the location specified by the MAGICK_HOME
-    environment variable. The uninstalled configuration is ideal for binary
-    distributions which are expected to extract and run in any location.
-
-  * --with-modules: image coders and process modules are built as
-    loadable modules which are installed under the directory
-    [prefix]/lib/ImageMagick-X.X.X/modules-QN (where 'N' equals 8, 16,
-    or 32 depending on the quantum depth) in the subdirectories 'coders'
-    and 'filters' respectively. The modules build option is only available
-    in conjunction with --enable-shared. If --enable-shared is not also
-    specified, then support for building modules is disabled.  Note that
-    if --enable-shared is specified, the module loader is active (allowing
-    extending an installed ImageMagick by simply copying a module into place)
-    but ImageMagick itself is not built using modules.
-
-  * --with-quantum-depth: This option allows the user to specify the
-    number of bits to use per pixel quantum (the size of the red, green,
-    blue, and alpha pixel components. For example, "--with-quantum-depth=8"
-    builds ImageMagick using 8-bit quantums.  Most computer display adaptors
-    use 8-bit quantums. Currently supported arguments are 8, 16, or 32. The
-    default is 8. This option is the most important option in determining
-    the overall run-time performance of ImageMagick.
-
-    The number of bits in a quantum determines how many values it may
-    contain. Each quantum level supports 256 times as many values as the
-    previous level. The following table shows the range available for
-    various quantum sizes.
-
-        QuantumDepth  Valid Range (Decimal)  Valid Range (Hex)
-              8            0-255                   00-FF
-             16           0-65535                0000-FFFF
-             32         0-4294967295         00000000-FFFFFFFF
-
-    Larger pixel quantums cause ImageMagick to run more slowly and to
-    require more memory. For example, using sixteen-bit pixel quantums
-    causes ImageMagick to run 15% to 50% slower (and take twice as much
-    memory) than when it is built to support eight-bit pixel quantums.
-
-    The amount of virtual memory consumed by an image can be computed by
-    the equation (QuantumDepth*Rows*Columns*5)/8. This is an important
-    consideration when resources are limited, particularly since processing
-    an image may require several images to be in memory at one time. The
-    following table shows memory consumption values for a 1024x768 image:
-
-        QuantumDepth  Virtual Memory
-            8              3MB
-           16              8MB
-           32             15MB
-
-  * --without-magick-plus-plus: Disable building Magick++, the C++
-    application programming interface to ImageMagick. A suitable C++
-    compiler is required in order to build Magick++. Specify the CXX
-    configure variable to select the C++ compiler to use (default "g++"),
-    and CXXFLAGS to select the desired compiler opimization and debug flags
-    (default "-g -O2"). Antique C++ compilers will normally be rejected by
-    configure tests so specifying this option should only be necessary if
-    Magick++ fails to compile.
-
-  * --with-frozenpaths: Normally external program names are substituted
-    into the delegates.xml file without full paths. Specify this option
-    to enable saving full paths to programs using locations determined by
-    configure. This is useful for environments where programs are stored
-    under multiple paths, and users may use different PATH settings than
-    the person who builds ImageMagick.
-
-  * --without-threads: By default, the ImageMagick library is compiled
-    with multi-thread support.  If this is undesireable, then specify
-    --without-threads.
-
-  * --with-cache: Specify a different image pixel cache threshold
-    using the --with-cache option. This sets the maximum amount of heap
-    memory that ImageMagick is allowed to consume before switching to using
-    memory-mapped temporary files to store raw pixel data.
-
-  * --disable-largefile: By default, ImageMagick is compiled with
-    support for large (> 2GB on a 32-bit CPU) files if the operating system
-    supports large files.  All applications which use the ImageMagick library
-    must then also include support for large files. By disabling support for
-    large files via --disable-largefile, dependent applications do not require
-    special compilation options for large files in order to use the library.
-
-  * --with-perl: If the argument --with-perl=/path/to/perl is supplied,
-    then /path/to/perl will be taken as the PERL interpreter to use. This
-    is important in case the 'perl' executable in your PATH is not PERL5,
-    or is not the PERL you want to use.
-
-  * --with-perl-options: The PerlMagick module is normally installed
-    using the Perl interpreter's installation PREFIX, rather than
-    ImageMagick's. If ImageMagick's installation prefix is not the same
-    as PERL's PREFIX, then you may find that PerlMagick's 'make install'
-    step tries to install into a directory tree that you don't have write
-    permissions to. This is common when PERL is delivered with the operating
-    system or on Internet Service Provider (ISP) web servers. If you want
-    PerlMagick to install elsewhere, then provide a PREFIX option to PERL's
-    configuration step via "--with-perl-options=PREFIX=/some/place". Other
-    options accepted by MakeMaker are 'LIB', 'LIBPERL_A', 'LINKTYPE',
-    and 'OPTIMIZE'. See the ExtUtils::MakeMaker(3) manual page for more
-    information on configuring PERL extensions.
-
-   * --without-x: By default, ImageMagick uses the X11 delegate libraries if
-     they are available. When --without-x is specified, use of X11 is disabled.
-     The display, animate, and import sub-commands are not included. The
-     remaining sub-commands have reduced functionality such as no access to X11
-     fonts (consider using Postscript or TrueType fonts instead).
-
-  * --with-gs-font-dir: Specify the directory containing the
-    Ghostscript Postscript Type 1 font files (e.g. "n022003l.pfb") so
-    that they can be rendered using the FreeType library. If the font
-    files are installed using the default Ghostscript installation paths
-    (${prefix}/share/ghostscript/fonts), they should be discovered
-    automatically by configure and specifying this option is not
-    necessary. Specify this option if the Ghostscript fonts fail to be
-    located automatically, or the location needs to be overridden.
-
-  * --with-windows-font-dir: Specify the directory containing
-    MS-Windows-compatible fonts. This is not necessary when ImageMagick is
-    running under MS-Windows.
-
-  After you install ImageMagick, install PerlMagick with these commands:
-
-    cd ImageMagick-6.5.4
-    cd PerlMagick
-    perl Makefile.PL
-    make
-    make install
-
-----
-
-Mac OS X-specific Build instructions
-
-Perform these steps as an administrator or with the sudo command:
-
-    * Install Fink. The default setup creates a /sw folder on your main hard
-    * drive. Make sure /sw/bin is in your path.
-    * Install the latest Xcode from Apple.
-    * Create a symbolic link in /Developer/SDKs/MacOSX10.4u.sdk/ to /sw:
-
-        cd /Developer/SDKs/MacOSX10.4u.sdk
-        ln -s sw /sw
-
-    * Use Fink, or FinkCommander to install any delegate libraries you
-    * require, for example:
-
-        fink install libjpeg
-
-As a regular user or administrator:
-
-    * Download the ImageMagick source distribution.
-    * Unpack and change into the top-level ImageMagick directory:
-
-        tar xvfz ImageMagick-6.3.3-0.tar.gz
-        cd ImageMagick-6.3.3
-
-    * Choose an architecture and set your CFLAGS environment variable. Here we
-    * set CFLAGS for an Intel build:
-
-        export CFLAGS="-O -g -isysroot /Developer/SDKs/MacOSX10.4u.sdk/ -arch
-i386 -I/sw/include/"
-
-    * Set your LDFLAGS environment variable to:
-
-        export LDFLAGS="-Wl,-syslibroot,/Developer/SDKs/MacOSX10.4u.sdk/,-L/sw/lib/"
-
-    * Configure ImageMagick:
-
-        ./configure --prefix=/sw --with-quantum-depth=16 \
-          --disable-dependency-tracking --with-x=yes \
-          --x-includes=/usr/X11R6/include --x-libraries=/usr/X11R6/lib/ \
-          --without-perl
-
-    * Build ImageMagick:
-
-        make
-
-    * Install ImageMagick:
-
-        sudo make install
-
-    * To test the ImageMagick GUI, start X11 and in a new shell and type:
-
-        display -display :0
-
-An alterative method is to download and build ImageMagick with MacPorts.
-Download and install MacPorts and type the following command:
-
-  sudo port install ImageMagick
-
-This not only installs ImageMagick but includes many of the delegate libraries
-such as JPEG and FreeType.
-
-----
-
-Building under Cygwin
-
-  ImageMagick may be built under the Windows '95-XP Cygwin Unix-emulation
-  environment available for free from
-
-    http://www.cygwin.com/
-
-  X11R6 for Cygwin is available from
-
-    http://xfree86.cygwin.com/
-
-  We recommended that the X11R6 package be installed since this enables
-  ImageMagick's X11 support (animate, display, and import sub-commands will
-  work) and it includes the Freetype v2 DLL required to support TrueType
-  and Postscript Type 1 fonts. Make sure that /usr/X11R6/bin is in your PATH
-  prior to running the configure program.
-
-  If you are using Cygwin version 1.3.9 or later, you can specify the configure
-  option '--enable-shared' to build Cygwin DLLs.  This option is required if
-  you want to build PerlMagick under Cygwin because Cygwin does not provide the
-  libperl.a static library required to create a static PerlMagick.  Note that
-  since C++ exceptions do not currently work properly when thrown from a DLL,
-  the Magick++ library is always built as a static library. Be sure to not
-  specify --disable-static if you are building the Magick++ library since that
-  would surely lead to problems.
-
-----
-
-Building under MinGW & MSYS
-
-  ImageMagick may be built using the free MinGW ("Minimalistic GNU for
-  Windows") package version 1.1, available from
-
-    http://www.mingw.org
-
-  which consists of a GNU-based (e.g. gcc) compilation toolset plus headers
-  and libraries required to build programs which are entirely based on
-  standard Microsoft Windows DLLs. MSYS provides a Unix-like console shell
-  window with sufficient functionality to run the ImageMagick configure
-  script and execute make.
-
-  Unlike the Cygwin build which creates programs based on a Unix-emulation
-  DLL, and which uses Unix-style paths to access Windows files, the MinGW
-  build creates native Windows console applications similar to the Visual
-  C++ build.
-
-  Please note that since the MinGW build is very new, some aspects of the
-  installation may vary from Windows user's expectations, and that only a
-  static build (no DLLs or modules) is currently supported.
-
-  Once MinGW & MSYS have been installed, start the MSYS console (via the
-  MSYS icon on the Windows desktop) and follow the Unix configure and build
-  instructions. Note that the default installation prefix is "/usr/local"
-  which installs the package into a MSYS directory. To install outside
-  of the MSYS directory tree, you may specify an installation prefix like
-  "/c/ImageMagick" which causes the package to be installed under the Windows
-  directory "C:\ImageMagick". The installation directory structure will look
-  very much like the Unix installation layout (e.g. "C:\ImageMagick\bin",
-  "C:\ImageMagick\lib", "C:\ImageMagick\share", etc.). Any additional
-  delegate libraries (e.g. libpng) will need to be built under MinGW in
-  order to be used.
-
-----
-
-Dealing with configuration failures:
-
+    LIBS
+        Extra libraries (.e.g. -l/usr/local/lib) required to link.
+  
+  Here is an example of setting configure variables from the command line:
+  
+    $magick> ./configure CC=c99 CFLAGS=-O2 LIBS=-lposix
+  
+  Any variable (e.g. CPPFLAGS or LDFLAGS) which requires a directory path must
+  specify an absolute path rather than a relative path.
+  
+  Configure can usually find the X include and library files automagically,
+  but if it doesn't, you can use the --x-includes=path and --x-libraries=path
+  options to specify their locations.
+  
+  The configure script provides a number of ImageMagick specific
+  options. When disabling an option --disable-something is equivalent to
+  specifying --enable-something=no and --without-something is equivalent to
+  --with-something=no. The configure options are as follows (execute configure
+  --help to see all options).
+  
+  ImageMagick options represent either features to be enabled, disabled,
+  or packages to be included in the build. When a feature is enabled (via
+  --enable-something), it enables code already present in ImageMagick. When a
+  package is enabled (via --with-something), the configure script will search
+  for it, and if is properly installed and ready to use (headers and built
+  libraries are found by compiler) it will be included in the build. The
+  configure script is delivered with all features disabled and all packages
+  enabled. In general, the only reason to disable a package is if a package
+  exists but it is unsuitable for the build (perhaps an old version or not
+  compiled with the right compilation flags).
+  
+  Here are the optional features you can configure:
+  
+    --enable-shared
+      build the shared libraries and support for loading coder and process
+      modules. Shared libraries are preferred because they allow programs
+      to share common code, making the individual programs much smaller. In
+      addition shared libraries are required in order for PerlMagick to be
+      dynamically loaded by an installed PERL (otherwise an additional PERL
+      (PerlMagick) must be installed.
+  
+      ImageMagick built with delegates (see MAGICK PLUG-INS below) can pose
+      additional challenges. If ImageMagick is built using static libraries (the
+      default without --enable-shared) then delegate libraries may be built as
+      either static libraries or shared libraries. However, if ImageMagick is
+      built using shared libraries, then all delegate libraries must also be
+      built as shared libraries. Static libraries usually have the extension
+      .a, while shared libraries typically have extensions like .so, .sa, or
+      .dll. Code in shared libraries normally must compiled using a special
+      compiler option to produce Position Independent Code (PIC). The only
+      time this not necessary is if the platform compiles code as PIC by
+      default.
+  
+      PIC compilation flags differ from vendor to vendor (gcc's is
+      -fPIC). However, you must compile all shared library source with the
+      same flag (for gcc use -fPIC rather than -fpic). While static libraries
+      are normally created using an archive tool like ar, shared libraries
+      are built using special linker or compiler options (e.g. -shared for gcc).
+  
+      If --enable-shared is not specified, a new PERL interpreter (PerlMagick)
+      is built which is statically linked against the PerlMagick extension. This
+      new interpreter is installed into the same directory as the ImageMagick
+      utilities. If --enable-shared is specified, the PerlMagick extension is
+      built as a dynamically loadable object which is loaded into your current
+      PERL interpreter at run-time. Use of dynamically-loaded extensions is
+      preferable over statically linked extensions so use --enable-shared if
+      possible (note that all libraries used with ImageMagick must be shared
+      libraries!).
+  
+    --disable-static
+      static archive libraries (with extension .a) are not built. If you
+      are building shared libraries, there is little value to building static
+      libraries. Reasons to build static libraries include: 1) they can be
+      easier to debug; 2) clients do not have external dependencies (i.e.
+      libMagick.so); 3) building PIC versions of the delegate libraries may
+      take additional expertise and effort; 4) you are unable to build shared
+      libraries.
+  
+    --disable-installed
+      disable building an installed ImageMagick (default enabled).
+  
+      By default the ImageMagick build is configured to formally install
+      into a directory tree. This the most secure and reliable way to install
+      ImageMagick. Use this option to configure ImageMagick so that it doesn't
+      use hard-coded paths and locates support files by computing an offset path
+      from the executable (or from the location specified by the MAGICK_HOME
+      environment variable. The uninstalled configuration is ideal for binary
+      distributions which are expected to extract and run in any location.
+  
+    --enable-ccmalloc
+      enable 'ccmalloc' memory debug support (default disabled).
+  
+    --enable-prof
+      enable 'prof' profiling support (default disabled).
+  
+    --enable-gprof
+      enable 'gprof' profiling support (default disabled).
+  
+    --enable-gcov
+   
+     enable 'gcov' profiling support (default disabled).
+    --disable-openmp
+      disable OpenMP (default enabled).
+  
+      Certain ImageMagick algorithms, for example convolution, can achieve
+      a significant speed-up with the assistance of the OpenMP API when
+      running on modern dual and quad-core processors.
+  
+    --disable-largefile
+      disable support for large (64 bit) file offsets.
+  
+      By default, ImageMagick is compiled with support for large files (>
+      2GB on a 32-bit CPU) if the operating system supports large files. Some
+      applications which use the ImageMagick library may also require support
+      for large files. By disabling support for large files via
+      --disable-largefile, dependent applications do not require special
+      compilation options for large files in order to use the library.
+  
+  Here are the optional packages you can configure:
+  
+    --with-quantum-depth
+      number of bits in a pixel quantum (default 16).
+  
+      Use this option to specify the number of bits to use per pixel quantum
+      (the size of the red, green, blue, and alpha pixel components). For
+      example, --with-quantum-depth=8 builds ImageMagick using 8-bit quantums.
+      Most computer display adapters use 8-bit quantums. Currently supported
+      arguments are 8, 16, or 32. We recommend the default of 16 because
+      some image formats support 16 bits-per-pixel. However, this option is
+      important in determining the overall run-time performance of ImageMagick.
+  
+      The number of bits in a quantum determines how many values it may
+      contain. Each quantum level supports 256 times as many values as the
+      previous level. The following table shows the range available for various
+      quantum sizes.
+  
+        Quantum Depth  Valid Range (Decimal)  Valid Range (Hex)
+            8             0-255                  00-FF
+           16             0-65535                0000-FFFF
+           32             0-4294967295           00000000-FFFFFFFF
+        
+      Larger pixel quantums can cause ImageMagick to run more slowly and to
+      require more memory. For example, using sixteen-bit pixel quantums can
+      cause ImageMagick to run 15% to 50% slower (and take twice as much memory)
+      than when it is built to support eight-bit pixel quantums.
+  
+      The amount of virtual memory consumed by an image can be computed by
+      the equation (5 * Quantum Depth * Rows * Columns) / 8. This an important
+      consideration when resources are limited, particularly since processing
+      an image may require several images to be in memory at one time. The
+      following table shows memory consumption values for a 1024x768 image:
+  
+        Quantum Depth   Virtual Memory
+             8               3MB
+            16               8MB
+            32              15MB
+  
+    --enable-hdri
+      accurately represent the wide range of intensity levels (experimental).
+  
+    --enable-osx-universal-binary
+      build a universal binary on OS X.
+  
+    --without-modules
+      disable support for dynamically loadable modules.
+  
+      Image coders and process modules are built as loadable modules which are
+      installed under the directory [prefix]/lib/ImageMagick-X.X.X/modules-QN
+      (where 'N' equals 8, 16, or 32 depending on the quantum depth) in the
+      subdirectories coders and filters respectively. The modules build option
+      is only available in conjunction with --enable-shared. If --enable-shared
+      is not also specified, support for building modules is disabled. Note that
+      if --enable-shared and --disable-modules are specified, the module loader
+      is active (allowing extending an installed ImageMagick by simply copying
+      a module into place) but ImageMagick itself is not built using modules.
+  
+    --with-cache
+      set pixel cache threshold (defaults to available memory).
+  
+      Specify a different image pixel cache threshold with this option. This
+      sets the maximum amount of heap memory that ImageMagick is allowed to
+      consume before switching to using memory-mapped temporary files to store
+      raw pixel data.
+  
+    --without-threads
+      disable threads support.
+  
+      By default, the ImageMagick library is compiled with multi-thread
+      support. If this undesirable, specify --without-threads.
+  
+    --with-frozenpaths
+      enable frozen delegate paths.
+  
+      Normally, external program names are substituted into the delegates.xml
+      configuration file without full paths. Specify this option to enable
+      saving full paths to programs using locations determined by configure.
+      This useful for environments where programs are stored under multiple
+      paths, and users may use different PATH settings than the person who
+      builds ImageMagick.
+  
+    --without-magick-plus-plus
+      disable build/install of Magick++.
+  
+      Disable building Magick++, the C++ application programming interface
+      to ImageMagick. A suitable C++ compiler is required in order to build
+      Magick++. Specify the CXX configure variable to select the C++ compiler
+      to use (default g++), and CXXFLAGS to select the desired compiler
+      optimization and debug flags (default -g -O2). Antique C++ compilers
+      will normally be rejected by configure tests so specifying this option
+      should only be necessary if Magick++ fails to compile.
+  
+    --without-perl
+      disable build/install of PerlMagick, or
+  
+      By default, PerlMagick is conveniently compiled and installed as part
+      of ImageMagick's normal configure, make, sudo make install process. When
+      --without-perl is specified, you must first install ImageMagick, change to
+      the PerlMagick subdirectory, build, and finally install PerlMagick. Note,
+      PerlMagick is configured even if --without-perl is specified. If the
+      argument --with-perl=/path/to/perl is supplied, /../path/to/perl is be
+      taken as the PERL interpreter to use. This important in case the perl
+      executable in your PATH is not PERL5, or is not the PERL you want to use.
+  
+    --with-perl=PERL
+      use specified Perl binary to configure PerlMagick.
+  
+    --with-perl-options=OPTIONS
+      options to pass on command-line when generating PerlMagick's Makefile
+      from Makefile.PL.
+  
+      The PerlMagick module is normally installed using the Perl interpreter's
+      installation PREFIX, rather than ImageMagick's. If ImageMagick's
+      installation prefix is not the same as PERL's PREFIX, then you
+      may find that PerlMagick's sudo make install step tries to install
+      into a directory tree that you don't have write permissions to. This
+      common when PERL is delivered with the operating system or on Internet
+      Service Provider (ISP) web servers. If you want PerlMagick to install
+      elsewhere, then provide a PREFIX option to PERL's configuration step
+      via "--with-perl-options=PREFIX=/some/place". Other options accepted by
+      MakeMaker are 'LIB', 'LIBPERL_A', 'LINKTYPE', and 'OPTIMIZE'. See the
+      ExtUtils::MakeMaker(3) manual page for more information on configuring
+      PERL extensions.
+  
+    --without-bzlib
+      disable BZLIB support.
+  
+    --without-dps
+      disable Display Postscript support.
+  
+    --with-fpx
+      enable FlashPIX support.
+  
+    --without-freetype
+      disable TrueType support.
+  
+    --with-gslib
+      enable Ghostscript library support.
+  
+    --without-jbig
+      disable JBIG support.
+  
+    --without-jpeg
+      disable JPEG support.
+  
+    --without-jp2
+      disable JPEG v2 support.
+  
+    --without-lcms
+      disable LCMS support.
+  
+    --without-png
+      disable PNG support.
+  
+    --without-tiff
+      disable TIFF support.
+  
+    --without-wmf
+      disable WMF support.
+  
+    --with-fontpath
+      prepend to default font search path.
+  
+    --with-gs-font-dir
+      directory containing Ghostscript fonts.
+  
+      Specify the directory containing the Ghostscript Postscript Type 1 font
+      files (e.g. n022003l.pfb) so that they can be rendered using the FreeType
+      library. If the font files are installed using the default Ghostscript
+      installation paths (${prefix}/share/ghostscript/fonts), they should
+      be discovered automagically by configure and specifying this option is
+      not necessary. Specify this option if the Ghostscript fonts fail to be
+      located automagically, or the location needs to be overridden.
+  
+    --with-windows-font-dir
+      directory containing MS-Windows fonts.
+  
+      Specify the directory containing MS-Windows-compatible fonts. This not
+      necessary when ImageMagick is running under MS-Windows.
+  
+    --without-xml
+      disable XML support.
+  
+    --without-zlib
+      disable ZLIB support.
+  
+    --without-x
+      don't use the X Window System.
+  
+      By default, ImageMagick uses the X11 delegate libraries if they are
+      available. When --without-x is specified, use of X11 is disabled. The
+      display, animate, and import sub-commands are not included. The remaining
+      sub-commands have reduced functionality such as no access to X11 fonts
+      (consider using Postscript or TrueType fonts instead).
+  
+    --with-share-path=DIR
+      Alternate path to share directory (default share/ImageMagick).
+  
+    --with-libstdc=DIR
+      use libstdc++ in DIR (for GNU C++).
+  
   While configure is designed to ease installation of ImageMagick, it often
   discovers problems that would otherwise be encountered later when compiling
   ImageMagick. The configure script tests for headers and libraries by
   executing the compiler (CC) with the specified compilation flags (CFLAGS),
   pre-processor flags (CPPFLAGS), and linker flags (LDFLAGS). Any errors are
-  logged to the file 'config.log'. If configure fails to discover a header
-  or library please review this log file to determine why, however, please
-  be aware that *errors in the config.log are normal* because configure
-  works by trying something and seeing if it fails. An error in config.log
-  is only a problem if the test should have passed on your system. After
-  taking corrective action, be sure to remove the 'config.cache' file before
-  running configure so that configure will re-inspect the environment rather
-  than using cached values.
-
+  logged to the file config.log. If configure fails to discover a header or
+  library please review this log file to determine why, however, please be
+  aware that *errors in the config.log are normal* because configure works by
+  trying something and seeing if it fails. An error in config.log is only a
+  problem if the test should have passed on your system.
+  
   Common causes of configure failures are: 1) a delegate header is not in the
   header include path (CPPFLAGS -I option); 2) a delegate library is not in
-  the linker search/run path (LDFLAGS -L/-R option); 3) a delegate library
-  is missing a function (old version?); 4) compilation environment is faulty.
-
+  the linker search/run path (LDFLAGS -L/-R option); 3) a delegate library is
+  missing a function (old version?); or 4) compilation environment is faulty.
+  
   If all reasonable corrective actions have been tried and the problem appears
   be due to a flaw in the configure script, please send a bug report to the
-  ImageMagick Defect Support Forum at
-  http://studio.imagemagick.org/magick/viewforum.php?f=3.  All bug reports
-  should contain the operating system type (as reported by 'uname -a') and the
-  compiler/compiler-version. A copy of the configure script output and/or the
-  config.log file may be valuable in order to find the problem.  If you send a
-  config.log, please also send a script of the configure output and a
+  ImageMagick Defect Support Forum. All bug reports should contain the operating
+  system type (as reported by uname -a) and the compiler/compiler-version. A
+  copy of the configure script output and/or the relevant portion of config.log
+  file may be valuable in order to find the problem. If you post portions
+  of config.log, please also send a script of the configure output and a
   description of what you expected to see (and why) so the failure you are
   observing can be identified and resolved.
-
-----
-
-Makefile Build Targets
-
-  Once ImageMagick is configured, these standard build targets are
-  available from the generated Makefiles:
-
-  * Build the package
-
-        make
-
-  * Install the package
-
-        make install
-
-  * Run tests using the installed ImageMagick ('make install' must be done
-    first!).  Ghostscript is a prerequisite, otherwise the EPS, PS, and PDF
-    tests will fail.
-
-        make check
-
-  * Remove everything in the build directory created by 'make'.
-
-        make clean
-
-  * Remove everything in the build directory created by 'configure' and 'make'.
-    This is useful if you want to start over from scratch.
-
-        make distclean
-
-  * Remove all files from the system which are (or would be) installed by
-    'make install' using the current configuration.  Note that this target is
-    imperfect for PerlMagick since Perl no longer supports an 'uninstall' target.
-
-        make uninstall
-
-----
-
-Build & Install:
-
-  Now that ImageMagick is configured, type
-
-     make
-
-  to build the package and
-
-     make install
-
-  to install it.
-
-----
-
-Verifying The Build:
-
-  To confirm your installation of the ImageMagick distribution was successful,
-  ensure that the installation directory is in your executable search path and
-  type:
-
-    display
-
-  The ImageMagick logo is displayed on your X11 display.
-
-  If the image colors are not correct use this command:
-
-    display -visual default
-
-  For a more serious test, you may run the ImageMagick test suite by
-  typing
-
+  
+  ImageMagick is now configured and ready to build
+  
+Build
+  
+  Once ImageMagick is configured, these standard build targets are available
+  from the generated make files:
+  
+    make
+      build ImageMagick.
+  
+    sudo make install
+      install ImageMagick.
+  
     make check
+      Run tests using the installed ImageMagick (sudo make install must be
+      done first). Ghostscript is a prerequisite, otherwise the EPS, PS,
+      and PDF tests will fail.
+  
+    make clean
+      Remove everything in the build directory created by make.
+  
+    make distclean
+      remove everything in the build directory created by configure and
+      make. This useful if you want to start over from scratch.
+  
+    make uninstall
+      Remove all files from the system which are (or would be) installed by sudo
+      make install using the current configuration. Note that this target is
+      imperfect for PerlMagick since Perl no longer supports an uninstall
+      target.
+  
+  In most cases you will simply wand to compile ImageMagick with this command:
+  
+    $magick> make
+  
+  Once built, you can optionally install ImageMagick on your system as
+  discussed below.
+  
+Install
+  
+  Now that ImageMagick is configured and built, type:
+  
+    $magick> make install
+  
+  to install it.
+  
+  By default, ImageMagick is installs binaries in /../usr/local/bin, libraries
+  in /../usr/local/lib, header files in /../usr/local/include and documentation
+  in /../usr/local/share. You can specify an alternative installation prefix
+  other than /../usr/local by giving configure the option --prefix=PATH. This
+  valuable in case you don't have privileges to install under the default
+  paths or if you want to install in the system directories instead.
+  
+  To confirm your installation of the ImageMagick distribution was successful,
+  ensure that the installation directory is in your executable search path
+  and type:
+  
+    $magick> display
+  
+  The ImageMagick logo is displayed on your X11 display.
+  
+  To verify the ImageMagick build configuration, type:
+  
+    $magick> identify -list configure
+  
+  To list which image formats are supported , type:
+  
+    $magick> identify -list format
+  
+  For a more comprehensive test, you run the ImageMagick test suite by typing:
+  
+    $magick> make check
+  
+  Ghostscript is a prerequisite, otherwise the EPS, PS, and PDF tests will
+  fail. Note that due to differences between the developer's environment and
+  your own it is possible that a few tests may fail even though the results are
+  ok. Differences between the developer's environment environment and your own
+  may include the compiler, the CPU type, and the library versions used. The
+  ImageMagick developers use the current release of all dependent libraries.
 
-  Note that due to differences between the developer's environment and
-  your own it is possible that some tests may be indicated as failed even
-  though the results are ok. Differences between the developer's environment
-  and your own may include the compiler, the CPU type, and the library
-  versions used. The ImageMagick developers use the current release of all
-  dependent libraries.
+Linux-specific Build instructions
+  
+  Download ImageMagick.src.rpm from ftp.imagemagick.org or its mirrors and
+  verify the distribution against its message digest.
+  
+  Build ImageMagick with this command:
+  
+    $magick> rpmbuild --rebuild ImageMagick.src.rpm
+  
+  After the build you, locate the RPMS folder and install the ImageMagick
+  binary RPM distribution:
+  
+    $magick> rpm -ivh ImageMagick-6.5.9-?.*.rpm
+  
+MinGW-specific Build instructions
+  
+  Although you can download and install delegate libraries yourself, many
+  are already available in the GnuWin32 distribution. Download and install
+  whichever delegate libraries you require such as JPEG, PNG, TIFF, etc. Make
+  sure you specify the development headers when you install a package. Next
+  type,
+  
+    $magick> tar jxvf ImageMagick-6.5.9-?.tar.bz2
+    $magick> cd ImageMagick-6.5.9
+    $magick> export CPPFLAGS="-Ic:/Progra~1/GnuWin32/include"
+    $magick> export LDFLAGS="-Lc:/Progra~1/GnuWin32/lib"
+    $magick> ./configure --without-perl
+    $magick> make $magick> sudo make install
+  
+Dealing with Unexpected Problems
+  
+  Chances are the download, configure, build, and install of ImageMagick went
+  flawlessly as it is intended, however, certain systems and environments may
+  cause one or more steps to fail. We discuss a few problems we've run across
+  and how to take corrective action to ensure you have a working release
+  of ImageMagick
+  
+  Build Problems
+  
+  If the build complains about missing dependencies (e.g. .deps/source.PLO),
+  add --disable-dependency-tracking to your configure command line.
+  
+  Some systems may fail to link at build time due to unresolved symbols. Try
+  adding the LDFLAGS to the configure command line:
+  
+    $magick> configure LDFLAGS='-L/usr/local/lib -R/usr/local/lib'
+  
+  Dynamic Linker Run-time Bindings
+  
+  On some systems, ImageMagick may not find its shared library, libMagick.so. Try
+  running the ldconfig with the library path:
+  
+    $magick> /sbin/ldconfig /usr/local/lib
+  
+  Solaris and Linux systems have the ldd command which is useful to track which
+  libraries ImageMagick depends on:
+  
+    $magick> ldd `which convert`
+  
+  Delegate Libraries
+  
+  On occasion you may receive these warnings:
+  
+    no decode delegate for this image format
+    no encode delegate for this image format
+  
+  This exception indicates that an external delegate library or its headers
+  were not available when ImageMagick was built. To add support for the image
+  format, download and install the requisite delegate library and its header
+  files and reconfigure, rebuild, and reinstall ImageMagick. As an example,
+  lets add support for the JPEG image format. First we install the JPEG RPMS:
+  
+    $magick> yum install libjpeg libjpeg-devel
+  
+  Now reconfigure, rebuild, and reinstall ImageMagick. To verify JPEG is now
+  properly supported within ImageMagick, use this command:
+  
+    $magick> identify -list format
+  
+  You should see a mode of rw- associated with the JPEG tag. This mode means
+  the image can be read or written and can only support one image per image
+  file.
+  
+PerlMagick
+  
+  If PerlMagick fails to link with a message similar to libperl.a is not found,
+  rerun configure with the --enable-shared or --enable-shared --with-modules
+  options.