blob: 82410b1edf367ab5ceb81e43f0e134af66a98714 [file] [log] [blame]
/*
* Copyright (c) 2017-2020, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <errno.h>
#include <common/debug.h>
#include <lib/mmio.h>
#include <lib/xlat_tables/xlat_tables_v2.h>
#include <sunxi_def.h>
#include <sunxi_mmap.h>
#include <sunxi_private.h>
static const mmap_region_t sunxi_mmap[MAX_STATIC_MMAP_REGIONS + 1] = {
MAP_REGION_FLAT(SUNXI_SRAM_BASE, SUNXI_SRAM_SIZE,
MT_DEVICE | MT_RW | MT_SECURE | MT_EXECUTE_NEVER),
MAP_REGION_FLAT(SUNXI_DEV_BASE, SUNXI_DEV_SIZE,
MT_DEVICE | MT_RW | MT_SECURE | MT_EXECUTE_NEVER),
MAP_REGION(PRELOADED_BL33_BASE, SUNXI_BL33_VIRT_BASE,
SUNXI_DRAM_MAP_SIZE, MT_RW_DATA | MT_NS),
{},
};
unsigned int plat_get_syscnt_freq2(void)
{
return SUNXI_OSC24M_CLK_IN_HZ;
}
void sunxi_configure_mmu_el3(int flags)
{
mmap_add_region(BL_CODE_BASE, BL_CODE_BASE,
BL_CODE_END - BL_CODE_BASE,
MT_CODE | MT_SECURE);
mmap_add_region(BL_CODE_END, BL_CODE_END,
BL_END - BL_CODE_END,
MT_RW_DATA | MT_SECURE);
#if SEPARATE_CODE_AND_RODATA
mmap_add_region(BL_RO_DATA_BASE, BL_RO_DATA_BASE,
BL_RO_DATA_END - BL_RO_DATA_BASE,
MT_RO_DATA | MT_SECURE);
#endif
#if SEPARATE_NOBITS_REGION
mmap_add_region(BL_NOBITS_BASE, BL_NOBITS_BASE,
BL_NOBITS_END - BL_NOBITS_BASE,
MT_RW_DATA | MT_SECURE);
#endif
#if USE_COHERENT_MEM
mmap_add_region(BL_COHERENT_RAM_BASE, BL_COHERENT_RAM_BASE,
BL_COHERENT_RAM_END - BL_COHERENT_RAM_BASE,
MT_DEVICE | MT_RW | MT_SECURE | MT_EXECUTE_NEVER);
#endif
mmap_add(sunxi_mmap);
init_xlat_tables();
enable_mmu_el3(0);
}
#define SRAM_VER_REG (SUNXI_SYSCON_BASE + 0x24)
uint16_t sunxi_read_soc_id(void)
{
uint32_t reg = mmio_read_32(SRAM_VER_REG);
/* Set bit 15 to prepare for the SOCID read. */
mmio_write_32(SRAM_VER_REG, reg | BIT(15));
reg = mmio_read_32(SRAM_VER_REG);
/* deactivate the SOCID access again */
mmio_write_32(SRAM_VER_REG, reg & ~BIT(15));
return reg >> 16;
}
/*
* Configure a given pin to the GPIO-OUT function and sets its level.
* The port is given as a capital letter, the pin is the number within
* this port group.
* So to set pin PC7 to high, use: sunxi_set_gpio_out('C', 7, true);
*/
void sunxi_set_gpio_out(char port, int pin, bool level_high)
{
uintptr_t port_base;
if (port < 'A' || port > 'L')
return;
if (port == 'L')
port_base = SUNXI_R_PIO_BASE;
else
port_base = SUNXI_PIO_BASE + (port - 'A') * 0x24;
/* Set the new level first before configuring the pin. */
if (level_high)
mmio_setbits_32(port_base + 0x10, BIT(pin));
else
mmio_clrbits_32(port_base + 0x10, BIT(pin));
/* configure pin as GPIO out (4(3) bits per pin, 1: GPIO out */
mmio_clrsetbits_32(port_base + (pin / 8) * 4,
0x7 << ((pin % 8) * 4),
0x1 << ((pin % 8) * 4));
}
int sunxi_init_platform_r_twi(uint16_t socid, bool use_rsb)
{
uint32_t pin_func = 0x77;
uint32_t device_bit;
unsigned int reset_offset = 0xb0;
switch (socid) {
case SUNXI_SOC_H5:
if (use_rsb)
return -ENODEV;
pin_func = 0x22;
device_bit = BIT(6);
break;
case SUNXI_SOC_H6:
case SUNXI_SOC_H616:
pin_func = use_rsb ? 0x22 : 0x33;
device_bit = BIT(16);
reset_offset = use_rsb ? 0x1bc : 0x19c;
break;
case SUNXI_SOC_A64:
pin_func = use_rsb ? 0x22 : 0x33;
device_bit = use_rsb ? BIT(3) : BIT(6);
break;
default:
INFO("R_I2C/RSB on Allwinner 0x%x SoC not supported\n", socid);
return -ENODEV;
}
/* un-gate R_PIO clock */
if (socid != SUNXI_SOC_H6 && socid != SUNXI_SOC_H616)
mmio_setbits_32(SUNXI_R_PRCM_BASE + 0x28, BIT(0));
/* switch pins PL0 and PL1 to the desired function */
mmio_clrsetbits_32(SUNXI_R_PIO_BASE + 0x00, 0xffU, pin_func);
/* level 2 drive strength */
mmio_clrsetbits_32(SUNXI_R_PIO_BASE + 0x14, 0x0fU, 0xaU);
/* set both pins to pull-up */
mmio_clrsetbits_32(SUNXI_R_PIO_BASE + 0x1c, 0x0fU, 0x5U);
/* un-gate clock */
if (socid != SUNXI_SOC_H6 && socid != SUNXI_SOC_H616)
mmio_setbits_32(SUNXI_R_PRCM_BASE + 0x28, device_bit);
else
mmio_setbits_32(SUNXI_R_PRCM_BASE + reset_offset, BIT(0));
/* assert, then de-assert reset of I2C/RSB controller */
mmio_clrbits_32(SUNXI_R_PRCM_BASE + reset_offset, device_bit);
mmio_setbits_32(SUNXI_R_PRCM_BASE + reset_offset, device_bit);
return 0;
}