Merge changes I15e7cc43,Id7411bd5,I92bafe70,I8f1c0658 into integration
* changes:
stm32mp1: enable PIE for BL32
stm32mp1: set BL sizes regardless of flags
Add PIE support for AARCH32
Avoid the use of linker *_SIZE__ macros
diff --git a/Makefile b/Makefile
index d424508..219413e 100644
--- a/Makefile
+++ b/Makefile
@@ -579,11 +579,9 @@
endif
BL31_CFLAGS += -fpie
BL31_LDFLAGS += $(PIE_LDFLAGS)
-ifeq ($(ARCH),aarch64)
BL32_CFLAGS += -fpie
BL32_LDFLAGS += $(PIE_LDFLAGS)
endif
-endif
ifeq (${ARCH},aarch64)
BL1_CPPFLAGS += -DIMAGE_AT_EL3
diff --git a/bl1/aarch32/bl1_entrypoint.S b/bl1/aarch32/bl1_entrypoint.S
index 6a15566..94dfd37 100644
--- a/bl1/aarch32/bl1_entrypoint.S
+++ b/bl1/aarch32/bl1_entrypoint.S
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2016-2019, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2021, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -49,7 +49,8 @@
_secondary_cold_boot=!COLD_BOOT_SINGLE_CPU \
_init_memory=1 \
_init_c_runtime=1 \
- _exception_vectors=bl1_vector_table
+ _exception_vectors=bl1_vector_table \
+ _pie_fixup_size=0
/* -----------------------------------------------------
* Perform BL1 setup
diff --git a/bl2/aarch32/bl2_el3_entrypoint.S b/bl2/aarch32/bl2_el3_entrypoint.S
index 2e851e6..7e85551 100644
--- a/bl2/aarch32/bl2_el3_entrypoint.S
+++ b/bl2/aarch32/bl2_el3_entrypoint.S
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2017-2019, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2017-2021, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -26,7 +26,8 @@
_secondary_cold_boot=!COLD_BOOT_SINGLE_CPU \
_init_memory=1 \
_init_c_runtime=1 \
- _exception_vectors=bl2_vector_table
+ _exception_vectors=bl2_vector_table \
+ _pie_fixup_size=0
/*
* Restore parameters of boot rom
diff --git a/bl2/aarch32/bl2_entrypoint.S b/bl2/aarch32/bl2_entrypoint.S
index 102fd2f..6e8e2c1 100644
--- a/bl2/aarch32/bl2_entrypoint.S
+++ b/bl2/aarch32/bl2_entrypoint.S
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2016-2019, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2021, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -80,12 +80,14 @@
* ---------------------------------------------
*/
ldr r0, =__BSS_START__
- ldr r1, =__BSS_SIZE__
+ ldr r1, =__BSS_END__
+ sub r1, r1, r0
bl zeromem
#if USE_COHERENT_MEM
ldr r0, =__COHERENT_RAM_START__
- ldr r1, =__COHERENT_RAM_UNALIGNED_SIZE__
+ ldr r1, =__COHERENT_RAM_END_UNALIGNED__
+ sub r1, r1, r0
bl zeromem
#endif
diff --git a/bl2u/aarch32/bl2u_entrypoint.S b/bl2u/aarch32/bl2u_entrypoint.S
index 6391f53..e4dd03d 100644
--- a/bl2u/aarch32/bl2u_entrypoint.S
+++ b/bl2u/aarch32/bl2u_entrypoint.S
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2016-2019, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2021, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -79,7 +79,8 @@
* ---------------------------------------------
*/
ldr r0, =__BSS_START__
- ldr r1, =__BSS_SIZE__
+ ldr r1, =__BSS_END__
+ sub r1, r1, r0
bl zeromem
/* --------------------------------------------
diff --git a/bl2u/aarch64/bl2u_entrypoint.S b/bl2u/aarch64/bl2u_entrypoint.S
index 3e37b44..15978b6 100644
--- a/bl2u/aarch64/bl2u_entrypoint.S
+++ b/bl2u/aarch64/bl2u_entrypoint.S
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2021, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -69,8 +69,11 @@
* - the coherent memory section.
* ---------------------------------------------
*/
- ldr x0, =__BSS_START__
- ldr x1, =__BSS_SIZE__
+ adrp x0, __BSS_START__
+ add x0, x0, :lo12:__BSS_START__
+ adrp x1, __BSS_END__
+ add x1, x1, :lo12:__BSS_END__
+ sub x1, x1, x0
bl zeromem
/* --------------------------------------------
diff --git a/bl32/sp_min/aarch32/entrypoint.S b/bl32/sp_min/aarch32/entrypoint.S
index f3a1e44..39f1065 100644
--- a/bl32/sp_min/aarch32/entrypoint.S
+++ b/bl32/sp_min/aarch32/entrypoint.S
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2016-2019, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2021, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -23,6 +23,8 @@
.globl sp_min_handle_smc
.globl sp_min_handle_fiq
+#define FIXUP_SIZE ((BL32_LIMIT) - (BL32_BASE))
+
.macro route_fiq_to_sp_min reg
/* -----------------------------------------------------
* FIQs are secure interrupts trapped by Monitor and non
@@ -87,7 +89,8 @@
_secondary_cold_boot=0 \
_init_memory=0 \
_init_c_runtime=1 \
- _exception_vectors=sp_min_vector_table
+ _exception_vectors=sp_min_vector_table \
+ _pie_fixup_size=FIXUP_SIZE
/* ---------------------------------------------------------------------
* Relay the previous bootloader's arguments to the platform layer
@@ -106,7 +109,8 @@
_secondary_cold_boot=!COLD_BOOT_SINGLE_CPU \
_init_memory=1 \
_init_c_runtime=1 \
- _exception_vectors=sp_min_vector_table
+ _exception_vectors=sp_min_vector_table \
+ _pie_fixup_size=FIXUP_SIZE
/* ---------------------------------------------------------------------
* For RESET_TO_SP_MIN systems, BL32 (SP_MIN) is the first bootloader
@@ -306,7 +310,8 @@
_secondary_cold_boot=0 \
_init_memory=0 \
_init_c_runtime=0 \
- _exception_vectors=sp_min_vector_table
+ _exception_vectors=sp_min_vector_table \
+ _pie_fixup_size=0
/*
* We're about to enable MMU and participate in PSCI state coordination.
diff --git a/bl32/sp_min/sp_min.ld.S b/bl32/sp_min/sp_min.ld.S
index f202c7a..475affa 100644
--- a/bl32/sp_min/sp_min.ld.S
+++ b/bl32/sp_min/sp_min.ld.S
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2016-2020, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2021, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -92,6 +92,7 @@
__RW_START__ = . ;
DATA_SECTION >RAM
+ RELA_SECTION >RAM
#ifdef BL32_PROGBITS_LIMIT
ASSERT(. <= BL32_PROGBITS_LIMIT, "BL32 progbits has exceeded its limit.")
@@ -141,5 +142,9 @@
__BL32_END__ = .;
+ /DISCARD/ : {
+ *(.dynsym .dynstr .hash .gnu.hash)
+ }
+
ASSERT(. <= BL32_LIMIT, "BL32 image has exceeded its limit.")
}
diff --git a/bl32/tsp/aarch64/tsp_entrypoint.S b/bl32/tsp/aarch64/tsp_entrypoint.S
index a007bab..795c586 100644
--- a/bl32/tsp/aarch64/tsp_entrypoint.S
+++ b/bl32/tsp/aarch64/tsp_entrypoint.S
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2013-2020, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2021, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -114,13 +114,19 @@
* - the coherent memory section.
* ---------------------------------------------
*/
- ldr x0, =__BSS_START__
- ldr x1, =__BSS_SIZE__
+ adrp x0, __BSS_START__
+ add x0, x0, :lo12:__BSS_START__
+ adrp x1, __BSS_END__
+ add x1, x1, :lo12:__BSS_END__
+ sub x1, x1, x0
bl zeromem
#if USE_COHERENT_MEM
- ldr x0, =__COHERENT_RAM_START__
- ldr x1, =__COHERENT_RAM_UNALIGNED_SIZE__
+ adrp x0, __COHERENT_RAM_START__
+ add x0, x0, :lo12:__COHERENT_RAM_START__
+ adrp x1, __COHERENT_RAM_END_UNALIGNED__
+ add x1, x1, :lo12:__COHERENT_RAM_END_UNALIGNED__
+ sub x1, x1, x0
bl zeromem
#endif
diff --git a/docs/getting_started/build-options.rst b/docs/getting_started/build-options.rst
index 5935b4e..2c3cd6b 100644
--- a/docs/getting_started/build-options.rst
+++ b/docs/getting_started/build-options.rst
@@ -252,7 +252,8 @@
- ``ENABLE_PIE``: Boolean option to enable Position Independent Executable(PIE)
support within generic code in TF-A. This option is currently only supported
- in BL2_AT_EL3, BL31, and BL32 (TSP). Default is 0.
+ in BL2_AT_EL3, BL31, and BL32 (TSP) for AARCH64 binaries, and in BL32
+ (SP_min) for AARCH32. Default is 0.
- ``ENABLE_PMF``: Boolean option to enable support for optional Performance
Measurement Framework(PMF). Default is 0.
@@ -847,4 +848,4 @@
--------------
-*Copyright (c) 2019-2020, Arm Limited. All rights reserved.*
+*Copyright (c) 2019-2021, Arm Limited. All rights reserved.*
diff --git a/include/arch/aarch32/el3_common_macros.S b/include/arch/aarch32/el3_common_macros.S
index 580dd95..7fff4c7 100644
--- a/include/arch/aarch32/el3_common_macros.S
+++ b/include/arch/aarch32/el3_common_macros.S
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2016-2020, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2021, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -10,6 +10,9 @@
#include <arch.h>
#include <asm_macros.S>
#include <assert_macros.S>
+#include <lib/xlat_tables/xlat_tables_defs.h>
+
+#define PAGE_START_MASK ~(PAGE_SIZE_MASK)
/*
* Helper macro to initialise EL3 registers we care about.
@@ -199,11 +202,18 @@
*
* _exception_vectors:
* Address of the exception vectors to program in the VBAR_EL3 register.
+ *
+ * _pie_fixup_size:
+ * Size of memory region to fixup Global Descriptor Table (GDT).
+ *
+ * A non-zero value is expected when firmware needs GDT to be fixed-up.
+ *
* -----------------------------------------------------------------------------
*/
.macro el3_entrypoint_common \
_init_sctlr, _warm_boot_mailbox, _secondary_cold_boot, \
- _init_memory, _init_c_runtime, _exception_vectors
+ _init_memory, _init_c_runtime, _exception_vectors, \
+ _pie_fixup_size
/* Make sure we are in Secure Mode */
#if ENABLE_ASSERTIONS
@@ -259,6 +269,27 @@
bxne r0
.endif /* _warm_boot_mailbox */
+ .if \_pie_fixup_size
+#if ENABLE_PIE
+ /*
+ * ------------------------------------------------------------
+ * If PIE is enabled fixup the Global descriptor Table only
+ * once during primary core cold boot path.
+ *
+ * Compile time base address, required for fixup, is calculated
+ * using "pie_fixup" label present within first page.
+ * ------------------------------------------------------------
+ */
+ pie_fixup:
+ ldr r0, =pie_fixup
+ ldr r1, =PAGE_START_MASK
+ and r0, r0, r1
+ mov_imm r1, \_pie_fixup_size
+ add r1, r1, r0
+ bl fixup_gdt_reloc
+#endif /* ENABLE_PIE */
+ .endif /* _pie_fixup_size */
+
/* ---------------------------------------------------------------------
* Set the exception vectors (VBAR/MVBAR).
* ---------------------------------------------------------------------
@@ -339,12 +370,14 @@
*/
mov r7, r12
ldr r0, =__BSS_START__
- ldr r1, =__BSS_SIZE__
+ ldr r1, =__BSS_END__
+ sub r1, r1, r0
bl zeromem
#if USE_COHERENT_MEM
ldr r0, =__COHERENT_RAM_START__
- ldr r1, =__COHERENT_RAM_UNALIGNED_SIZE__
+ ldr r1, =__COHERENT_RAM_END_UNALIGNED__
+ sub r1, r1, r0
bl zeromem
#endif
@@ -358,7 +391,8 @@
*/
ldr r0, =__DATA_RAM_START__
ldr r1, =__DATA_ROM_START__
- ldr r2, =__DATA_SIZE__
+ ldr r2, =__DATA_RAM_END__
+ sub r2, r2, r0
bl memcpy4
#endif
.endif /* _init_c_runtime */
diff --git a/include/common/bl_common.ld.h b/include/common/bl_common.ld.h
index ab3391a..5147e37 100644
--- a/include/common/bl_common.ld.h
+++ b/include/common/bl_common.ld.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2020, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2020-2021, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -105,10 +105,18 @@
* .rela.dyn needs to come after .data for the read-elf utility to parse
* this section correctly.
*/
+#if __aarch64__
+#define RELA_DYN_NAME .rela.dyn
+#define RELOC_SECTIONS_PATTERN *(.rela*)
+#else
+#define RELA_DYN_NAME .rel.dyn
+#define RELOC_SECTIONS_PATTERN *(.rel*)
+#endif
+
#define RELA_SECTION \
- .rela.dyn : ALIGN(STRUCT_ALIGN) { \
+ RELA_DYN_NAME : ALIGN(STRUCT_ALIGN) { \
__RELA_START__ = .; \
- *(.rela*) \
+ RELOC_SECTIONS_PATTERN \
__RELA_END__ = .; \
}
diff --git a/lib/aarch32/misc_helpers.S b/lib/aarch32/misc_helpers.S
index e9734ac..8b16f93 100644
--- a/lib/aarch32/misc_helpers.S
+++ b/lib/aarch32/misc_helpers.S
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2016-2020, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2021, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -7,6 +7,8 @@
#include <arch.h>
#include <asm_macros.S>
#include <assert_macros.S>
+#include <common/bl_common.h>
+#include <lib/xlat_tables/xlat_tables_defs.h>
.globl smc
.globl zeromem
@@ -14,6 +16,9 @@
.globl memcpy4
.globl disable_mmu_icache_secure
.globl disable_mmu_secure
+ .globl fixup_gdt_reloc
+
+#define PAGE_START_MASK ~(PAGE_SIZE_MASK)
func smc
/*
@@ -187,3 +192,124 @@
ldr r1, =(SCTLR_M_BIT | SCTLR_C_BIT | SCTLR_I_BIT)
b do_disable_mmu
endfunc disable_mmu_icache_secure
+
+/* ---------------------------------------------------------------------------
+ * Helper to fixup Global Descriptor table (GDT) and dynamic relocations
+ * (.rel.dyn) at runtime.
+ *
+ * This function is meant to be used when the firmware is compiled with -fpie
+ * and linked with -pie options. We rely on the linker script exporting
+ * appropriate markers for start and end of the section. For GOT, we
+ * expect __GOT_START__ and __GOT_END__. Similarly for .rela.dyn, we expect
+ * __RELA_START__ and __RELA_END__.
+ *
+ * The function takes the limits of the memory to apply fixups to as
+ * arguments (which is usually the limits of the relocable BL image).
+ * r0 - the start of the fixup region
+ * r1 - the limit of the fixup region
+ * These addresses have to be 4KB page aligned.
+ * ---------------------------------------------------------------------------
+ */
+
+/* Relocation codes */
+#define R_ARM_RELATIVE 23
+
+func fixup_gdt_reloc
+ mov r6, r0
+ mov r7, r1
+
+#if ENABLE_ASSERTIONS
+ /* Test if the limits are 4K aligned */
+ orr r0, r0, r1
+ mov r1, #(PAGE_SIZE_MASK)
+ tst r0, r1
+ ASM_ASSERT(eq)
+#endif
+ /*
+ * Calculate the offset based on return address in lr.
+ * Assume that this function is called within a page at the start of
+ * fixup region.
+ */
+ ldr r1, =PAGE_START_MASK
+ and r2, lr, r1
+ subs r0, r2, r6 /* Diff(S) = Current Address - Compiled Address */
+ beq 3f /* Diff(S) = 0. No relocation needed */
+
+ ldr r1, =__GOT_START__
+ add r1, r1, r0
+ ldr r2, =__GOT_END__
+ add r2, r2, r0
+
+ /*
+ * GOT is an array of 32_bit addresses which must be fixed up as
+ * new_addr = old_addr + Diff(S).
+ * The new_addr is the address currently the binary is executing from
+ * and old_addr is the address at compile time.
+ */
+1: ldr r3, [r1]
+
+ /* Skip adding offset if address is < lower limit */
+ cmp r3, r6
+ blo 2f
+
+ /* Skip adding offset if address is > upper limit */
+ cmp r3, r7
+ bhi 2f
+ add r3, r3, r0
+ str r3, [r1]
+
+2: add r1, r1, #4
+ cmp r1, r2
+ blo 1b
+
+ /* Starting dynamic relocations. Use ldr to get RELA_START and END */
+3: ldr r1, =__RELA_START__
+ add r1, r1, r0
+ ldr r2, =__RELA_END__
+ add r2, r2, r0
+
+ /*
+ * According to ELF-32 specification, the RELA data structure is as
+ * follows:
+ * typedef struct {
+ * Elf32_Addr r_offset;
+ * Elf32_Xword r_info;
+ * } Elf32_Rela;
+ *
+ * r_offset is address of reference
+ * r_info is symbol index and type of relocation (in this case
+ * code 23 which corresponds to R_ARM_RELATIVE).
+ *
+ * Size of Elf32_Rela structure is 8 bytes.
+ */
+
+ /* Skip R_ARM_NONE entry with code 0 */
+1: ldr r3, [r1, #4]
+ ands r3, r3, #0xff
+ beq 2f
+
+#if ENABLE_ASSERTIONS
+ /* Assert that the relocation type is R_ARM_RELATIVE */
+ cmp r3, #R_ARM_RELATIVE
+ ASM_ASSERT(eq)
+#endif
+ ldr r3, [r1] /* r_offset */
+ add r3, r0, r3 /* Diff(S) + r_offset */
+ ldr r4, [r3]
+
+ /* Skip adding offset if address is < lower limit */
+ cmp r4, r6
+ blo 2f
+
+ /* Skip adding offset if address is >= upper limit */
+ cmp r4, r7
+ bhs 2f
+
+ add r4, r0, r4
+ str r4, [r3]
+
+2: add r1, r1, #8
+ cmp r1, r2
+ blo 1b
+ bx lr
+endfunc fixup_gdt_reloc
diff --git a/plat/st/stm32mp1/bl2_plat_setup.c b/plat/st/stm32mp1/bl2_plat_setup.c
index e09ce63..0e95f49 100644
--- a/plat/st/stm32mp1/bl2_plat_setup.c
+++ b/plat/st/stm32mp1/bl2_plat_setup.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2015-2020, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2021, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -188,11 +188,6 @@
mmap_add_region(STM32MP_OPTEE_BASE, STM32MP_OPTEE_BASE,
STM32MP_OPTEE_SIZE,
MT_MEMORY | MT_RW | MT_SECURE);
-#else
- /* Prevent corruption of preloaded BL32 */
- mmap_add_region(BL32_BASE, BL32_BASE,
- BL32_LIMIT - BL32_BASE,
- MT_RO_DATA | MT_SECURE);
#endif
/* Prevent corruption of preloaded Device Tree */
mmap_add_region(DTB_BASE, DTB_BASE,
diff --git a/plat/st/stm32mp1/include/platform_def.h b/plat/st/stm32mp1/include/platform_def.h
index 7076a71..b45f8fb 100644
--- a/plat/st/stm32mp1/include/platform_def.h
+++ b/plat/st/stm32mp1/include/platform_def.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2021, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -68,10 +68,15 @@
* BL32 specific defines.
******************************************************************************/
#ifndef AARCH32_SP_OPTEE
+#if ENABLE_PIE
+#define BL32_BASE 0
+#define BL32_LIMIT STM32MP_BL32_SIZE
+#else
#define BL32_BASE STM32MP_BL32_BASE
#define BL32_LIMIT (STM32MP_BL32_BASE + \
STM32MP_BL32_SIZE)
#endif
+#endif
/*******************************************************************************
* BL33 specific defines.
diff --git a/plat/st/stm32mp1/plat_bl2_mem_params_desc.c b/plat/st/stm32mp1/plat_bl2_mem_params_desc.c
index 1d407bb..984c6ba 100644
--- a/plat/st/stm32mp1/plat_bl2_mem_params_desc.c
+++ b/plat/st/stm32mp1/plat_bl2_mem_params_desc.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2016-2019, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2021, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -28,7 +28,7 @@
SECURE | EXECUTABLE | EP_FIRST_EXE),
#if !defined(AARCH32_SP_OPTEE)
- .ep_info.pc = BL32_BASE,
+ .ep_info.pc = STM32MP_BL32_BASE,
#endif
.ep_info.spsr = SPSR_MODE32(MODE32_svc, SPSR_T_ARM,
SPSR_E_LITTLE,
@@ -42,8 +42,8 @@
.image_info.image_base = STM32MP_OPTEE_BASE,
.image_info.image_max_size = STM32MP_OPTEE_SIZE,
#else
- .image_info.image_base = BL32_BASE,
- .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
+ .image_info.image_base = STM32MP_BL32_BASE,
+ .image_info.image_max_size = STM32MP_BL32_SIZE,
#endif
.next_handoff_image_id = BL33_IMAGE_ID,
},
diff --git a/plat/st/stm32mp1/platform.mk b/plat/st/stm32mp1/platform.mk
index 3595819..50fb1b7 100644
--- a/plat/st/stm32mp1/platform.mk
+++ b/plat/st/stm32mp1/platform.mk
@@ -1,5 +1,5 @@
#
-# Copyright (c) 2015-2020, ARM Limited and Contributors. All rights reserved.
+# Copyright (c) 2015-2021, ARM Limited and Contributors. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
@@ -9,6 +9,8 @@
BL2_AT_EL3 := 1
USE_COHERENT_MEM := 0
+ENABLE_PIE := 1
+
STM32_TF_VERSION ?= 0
# Enable dynamic memory mapping
diff --git a/plat/st/stm32mp1/stm32mp1_def.h b/plat/st/stm32mp1/stm32mp1_def.h
index f4aeab5..9e5bfdc 100644
--- a/plat/st/stm32mp1/stm32mp1_def.h
+++ b/plat/st/stm32mp1/stm32mp1_def.h
@@ -117,30 +117,14 @@
#define STM32MP_OPTEE_SIZE (STM32MP_DTB_BASE - \
STM32MP_OPTEE_BASE)
#else
-#if STACK_PROTECTOR_ENABLED
#define STM32MP_BL32_SIZE U(0x00012000) /* 72 KB for BL32 */
-#else
-#define STM32MP_BL32_SIZE U(0x00011000) /* 68 KB for BL32 */
-#endif
#endif
#define STM32MP_BL32_BASE (STM32MP_SEC_SYSRAM_BASE + \
STM32MP_SEC_SYSRAM_SIZE - \
STM32MP_BL32_SIZE)
-#ifdef AARCH32_SP_OPTEE
-#if STACK_PROTECTOR_ENABLED
#define STM32MP_BL2_SIZE U(0x0001A000) /* 100 KB for BL2 */
-#else
-#define STM32MP_BL2_SIZE U(0x00018000) /* 92 KB for BL2 */
-#endif
-#else
-#if STACK_PROTECTOR_ENABLED
-#define STM32MP_BL2_SIZE U(0x00019000) /* 96 KB for BL2 */
-#else
-#define STM32MP_BL2_SIZE U(0x00017000) /* 88 KB for BL2 */
-#endif
-#endif
#define STM32MP_BL2_BASE (STM32MP_BL32_BASE - \
STM32MP_BL2_SIZE)