blob: b8955afcc48320b7495f7fec0abb9b5b4661e5db [file] [log] [blame]
/*
* Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef __ARM_DEF_H__
#define __ARM_DEF_H__
#include <arch.h>
#include <common_def.h>
#include <gic_common.h>
#include <interrupt_props.h>
#include <platform_def.h>
#include <tbbr_img_def.h>
#include <utils_def.h>
#include <xlat_tables_defs.h>
/******************************************************************************
* Definitions common to all ARM standard platforms
*****************************************************************************/
/* Special value used to verify platform parameters from BL2 to BL31 */
#define ARM_BL31_PLAT_PARAM_VAL 0x0f1e2d3c4b5a6978ULL
#define ARM_SYSTEM_COUNT 1
#define ARM_CACHE_WRITEBACK_SHIFT 6
/*
* Macros mapping the MPIDR Affinity levels to ARM Platform Power levels. The
* power levels have a 1:1 mapping with the MPIDR affinity levels.
*/
#define ARM_PWR_LVL0 MPIDR_AFFLVL0
#define ARM_PWR_LVL1 MPIDR_AFFLVL1
#define ARM_PWR_LVL2 MPIDR_AFFLVL2
/*
* Macros for local power states in ARM platforms encoded by State-ID field
* within the power-state parameter.
*/
/* Local power state for power domains in Run state. */
#define ARM_LOCAL_STATE_RUN 0
/* Local power state for retention. Valid only for CPU power domains */
#define ARM_LOCAL_STATE_RET 1
/* Local power state for OFF/power-down. Valid for CPU and cluster power
domains */
#define ARM_LOCAL_STATE_OFF 2
/* Memory location options for TSP */
#define ARM_TRUSTED_SRAM_ID 0
#define ARM_TRUSTED_DRAM_ID 1
#define ARM_DRAM_ID 2
/* The first 4KB of Trusted SRAM are used as shared memory */
#define ARM_TRUSTED_SRAM_BASE 0x04000000
#define ARM_SHARED_RAM_BASE ARM_TRUSTED_SRAM_BASE
#define ARM_SHARED_RAM_SIZE 0x00001000 /* 4 KB */
/* The remaining Trusted SRAM is used to load the BL images */
#define ARM_BL_RAM_BASE (ARM_SHARED_RAM_BASE + \
ARM_SHARED_RAM_SIZE)
#define ARM_BL_RAM_SIZE (PLAT_ARM_TRUSTED_SRAM_SIZE - \
ARM_SHARED_RAM_SIZE)
/*
* The top 16MB of DRAM1 is configured as secure access only using the TZC
* - SCP TZC DRAM: If present, DRAM reserved for SCP use
* - AP TZC DRAM: The remaining TZC secured DRAM reserved for AP use
*/
#define ARM_TZC_DRAM1_SIZE ULL(0x01000000)
#define ARM_SCP_TZC_DRAM1_BASE (ARM_DRAM1_BASE + \
ARM_DRAM1_SIZE - \
ARM_SCP_TZC_DRAM1_SIZE)
#define ARM_SCP_TZC_DRAM1_SIZE PLAT_ARM_SCP_TZC_DRAM1_SIZE
#define ARM_SCP_TZC_DRAM1_END (ARM_SCP_TZC_DRAM1_BASE + \
ARM_SCP_TZC_DRAM1_SIZE - 1)
/*
* Define a 2MB region within the TZC secured DRAM for use by EL3 runtime
* firmware. This region is meant to be NOLOAD and will not be zero
* initialized. Data sections with the attribute `arm_el3_tzc_dram` will be
* placed here.
*/
#define ARM_EL3_TZC_DRAM1_BASE (ARM_SCP_TZC_DRAM1_BASE - ARM_EL3_TZC_DRAM1_SIZE)
#define ARM_EL3_TZC_DRAM1_SIZE ULL(0x00200000) /* 2 MB */
#define ARM_EL3_TZC_DRAM1_END (ARM_EL3_TZC_DRAM1_BASE + \
ARM_EL3_TZC_DRAM1_SIZE - 1)
#define ARM_AP_TZC_DRAM1_BASE (ARM_DRAM1_BASE + \
ARM_DRAM1_SIZE - \
ARM_TZC_DRAM1_SIZE)
#define ARM_AP_TZC_DRAM1_SIZE (ARM_TZC_DRAM1_SIZE - \
(ARM_SCP_TZC_DRAM1_SIZE + \
ARM_EL3_TZC_DRAM1_SIZE))
#define ARM_AP_TZC_DRAM1_END (ARM_AP_TZC_DRAM1_BASE + \
ARM_AP_TZC_DRAM1_SIZE - 1)
/* Define the Access permissions for Secure peripherals to NS_DRAM */
#if ARM_CRYPTOCELL_INTEG
/*
* Allow Secure peripheral to read NS DRAM when integrated with CryptoCell.
* This is required by CryptoCell to authenticate BL33 which is loaded
* into the Non Secure DDR.
*/
#define ARM_TZC_NS_DRAM_S_ACCESS TZC_REGION_S_RD
#else
#define ARM_TZC_NS_DRAM_S_ACCESS TZC_REGION_S_NONE
#endif
#ifdef SPD_opteed
/*
* BL2 needs to map 4MB at the end of TZC_DRAM1 in order to
* load/authenticate the trusted os extra image. The first 512KB of
* TZC_DRAM1 are reserved for trusted os (OPTEE). The extra image loading
* for OPTEE is paged image which only include the paging part using
* virtual memory but without "init" data. OPTEE will copy the "init" data
* (from pager image) to the first 512KB of TZC_DRAM, and then copy the
* extra image behind the "init" data.
*/
#define ARM_OPTEE_PAGEABLE_LOAD_BASE (ARM_AP_TZC_DRAM1_BASE + \
ARM_AP_TZC_DRAM1_SIZE - \
ARM_OPTEE_PAGEABLE_LOAD_SIZE)
#define ARM_OPTEE_PAGEABLE_LOAD_SIZE 0x400000
#define ARM_OPTEE_PAGEABLE_LOAD_MEM MAP_REGION_FLAT( \
ARM_OPTEE_PAGEABLE_LOAD_BASE, \
ARM_OPTEE_PAGEABLE_LOAD_SIZE, \
MT_MEMORY | MT_RW | MT_SECURE)
/*
* Map the memory for the OP-TEE core (also known as OP-TEE pager when paging
* support is enabled).
*/
#define ARM_MAP_OPTEE_CORE_MEM MAP_REGION_FLAT( \
BL32_BASE, \
BL32_LIMIT - BL32_BASE, \
MT_MEMORY | MT_RW | MT_SECURE)
#endif /* SPD_opteed */
#define ARM_NS_DRAM1_BASE ARM_DRAM1_BASE
#define ARM_NS_DRAM1_SIZE (ARM_DRAM1_SIZE - \
ARM_TZC_DRAM1_SIZE)
#define ARM_NS_DRAM1_END (ARM_NS_DRAM1_BASE + \
ARM_NS_DRAM1_SIZE - 1)
#define ARM_DRAM1_BASE ULL(0x80000000)
#define ARM_DRAM1_SIZE ULL(0x80000000)
#define ARM_DRAM1_END (ARM_DRAM1_BASE + \
ARM_DRAM1_SIZE - 1)
#define ARM_DRAM2_BASE ULL(0x880000000)
#define ARM_DRAM2_SIZE PLAT_ARM_DRAM2_SIZE
#define ARM_DRAM2_END (ARM_DRAM2_BASE + \
ARM_DRAM2_SIZE - 1)
#define ARM_IRQ_SEC_PHY_TIMER 29
#define ARM_IRQ_SEC_SGI_0 8
#define ARM_IRQ_SEC_SGI_1 9
#define ARM_IRQ_SEC_SGI_2 10
#define ARM_IRQ_SEC_SGI_3 11
#define ARM_IRQ_SEC_SGI_4 12
#define ARM_IRQ_SEC_SGI_5 13
#define ARM_IRQ_SEC_SGI_6 14
#define ARM_IRQ_SEC_SGI_7 15
/*
* List of secure interrupts are deprecated, but are retained only to support
* legacy configurations.
*/
#define ARM_G1S_IRQS ARM_IRQ_SEC_PHY_TIMER, \
ARM_IRQ_SEC_SGI_1, \
ARM_IRQ_SEC_SGI_2, \
ARM_IRQ_SEC_SGI_3, \
ARM_IRQ_SEC_SGI_4, \
ARM_IRQ_SEC_SGI_5, \
ARM_IRQ_SEC_SGI_7
#define ARM_G0_IRQS ARM_IRQ_SEC_SGI_0, \
ARM_IRQ_SEC_SGI_6
/*
* Define a list of Group 1 Secure and Group 0 interrupt properties as per GICv3
* terminology. On a GICv2 system or mode, the lists will be merged and treated
* as Group 0 interrupts.
*/
#define ARM_G1S_IRQ_PROPS(grp) \
INTR_PROP_DESC(ARM_IRQ_SEC_PHY_TIMER, GIC_HIGHEST_SEC_PRIORITY, grp, \
GIC_INTR_CFG_LEVEL), \
INTR_PROP_DESC(ARM_IRQ_SEC_SGI_1, GIC_HIGHEST_SEC_PRIORITY, grp, \
GIC_INTR_CFG_EDGE), \
INTR_PROP_DESC(ARM_IRQ_SEC_SGI_2, GIC_HIGHEST_SEC_PRIORITY, grp, \
GIC_INTR_CFG_EDGE), \
INTR_PROP_DESC(ARM_IRQ_SEC_SGI_3, GIC_HIGHEST_SEC_PRIORITY, grp, \
GIC_INTR_CFG_EDGE), \
INTR_PROP_DESC(ARM_IRQ_SEC_SGI_4, GIC_HIGHEST_SEC_PRIORITY, grp, \
GIC_INTR_CFG_EDGE), \
INTR_PROP_DESC(ARM_IRQ_SEC_SGI_5, GIC_HIGHEST_SEC_PRIORITY, grp, \
GIC_INTR_CFG_EDGE), \
INTR_PROP_DESC(ARM_IRQ_SEC_SGI_7, GIC_HIGHEST_SEC_PRIORITY, grp, \
GIC_INTR_CFG_EDGE)
#define ARM_G0_IRQ_PROPS(grp) \
INTR_PROP_DESC(ARM_IRQ_SEC_SGI_0, PLAT_SDEI_NORMAL_PRI, grp, \
GIC_INTR_CFG_EDGE), \
INTR_PROP_DESC(ARM_IRQ_SEC_SGI_6, GIC_HIGHEST_SEC_PRIORITY, grp, \
GIC_INTR_CFG_EDGE)
#define ARM_MAP_SHARED_RAM MAP_REGION_FLAT( \
ARM_SHARED_RAM_BASE, \
ARM_SHARED_RAM_SIZE, \
MT_DEVICE | MT_RW | MT_SECURE)
#define ARM_MAP_NS_DRAM1 MAP_REGION_FLAT( \
ARM_NS_DRAM1_BASE, \
ARM_NS_DRAM1_SIZE, \
MT_MEMORY | MT_RW | MT_NS)
#define ARM_MAP_DRAM2 MAP_REGION_FLAT( \
ARM_DRAM2_BASE, \
ARM_DRAM2_SIZE, \
MT_MEMORY | MT_RW | MT_NS)
#ifdef SPD_tspd
#define ARM_MAP_TSP_SEC_MEM MAP_REGION_FLAT( \
TSP_SEC_MEM_BASE, \
TSP_SEC_MEM_SIZE, \
MT_MEMORY | MT_RW | MT_SECURE)
#endif
#if ARM_BL31_IN_DRAM
#define ARM_MAP_BL31_SEC_DRAM MAP_REGION_FLAT( \
BL31_BASE, \
PLAT_ARM_MAX_BL31_SIZE, \
MT_MEMORY | MT_RW | MT_SECURE)
#endif
#define ARM_MAP_EL3_TZC_DRAM MAP_REGION_FLAT( \
ARM_EL3_TZC_DRAM1_BASE, \
ARM_EL3_TZC_DRAM1_SIZE, \
MT_MEMORY | MT_RW | MT_SECURE)
/*
* The number of regions like RO(code), coherent and data required by
* different BL stages which need to be mapped in the MMU.
*/
#if USE_COHERENT_MEM
#define ARM_BL_REGIONS 3
#else
#define ARM_BL_REGIONS 2
#endif
#define MAX_MMAP_REGIONS (PLAT_ARM_MMAP_ENTRIES + \
ARM_BL_REGIONS)
/* Memory mapped Generic timer interfaces */
#define ARM_SYS_CNTCTL_BASE 0x2a430000
#define ARM_SYS_CNTREAD_BASE 0x2a800000
#define ARM_SYS_TIMCTL_BASE 0x2a810000
#define ARM_CONSOLE_BAUDRATE 115200
/* Trusted Watchdog constants */
#define ARM_SP805_TWDG_BASE 0x2a490000
#define ARM_SP805_TWDG_CLK_HZ 32768
/* The TBBR document specifies a watchdog timeout of 256 seconds. SP805
* asserts reset after two consecutive countdowns (2 x 128 = 256 sec) */
#define ARM_TWDG_TIMEOUT_SEC 128
#define ARM_TWDG_LOAD_VAL (ARM_SP805_TWDG_CLK_HZ * \
ARM_TWDG_TIMEOUT_SEC)
/******************************************************************************
* Required platform porting definitions common to all ARM standard platforms
*****************************************************************************/
/*
* We need to access DRAM2 from BL2 for PSCI_MEM_PROTECT for
* AArch64 builds
*/
#ifdef AARCH64
#define PLAT_PHY_ADDR_SPACE_SIZE (1ull << 36)
#define PLAT_VIRT_ADDR_SPACE_SIZE (1ull << 36)
#else
#define PLAT_PHY_ADDR_SPACE_SIZE (1ull << 32)
#define PLAT_VIRT_ADDR_SPACE_SIZE (1ull << 32)
#endif
/*
* This macro defines the deepest retention state possible. A higher state
* id will represent an invalid or a power down state.
*/
#define PLAT_MAX_RET_STATE ARM_LOCAL_STATE_RET
/*
* This macro defines the deepest power down states possible. Any state ID
* higher than this is invalid.
*/
#define PLAT_MAX_OFF_STATE ARM_LOCAL_STATE_OFF
/*
* Some data must be aligned on the biggest cache line size in the platform.
* This is known only to the platform as it might have a combination of
* integrated and external caches.
*/
#define CACHE_WRITEBACK_GRANULE (1 << ARM_CACHE_WRITEBACK_SHIFT)
/*******************************************************************************
* BL1 specific defines.
* BL1 RW data is relocated from ROM to RAM at runtime so we need 2 sets of
* addresses.
******************************************************************************/
#define BL1_RO_BASE PLAT_ARM_TRUSTED_ROM_BASE
#define BL1_RO_LIMIT (PLAT_ARM_TRUSTED_ROM_BASE \
+ PLAT_ARM_TRUSTED_ROM_SIZE)
/*
* Put BL1 RW at the top of the Trusted SRAM.
*/
#define BL1_RW_BASE (ARM_BL_RAM_BASE + \
ARM_BL_RAM_SIZE - \
PLAT_ARM_MAX_BL1_RW_SIZE)
#define BL1_RW_LIMIT (ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE)
/*******************************************************************************
* BL2 specific defines.
******************************************************************************/
#if ARM_BL31_IN_DRAM || (defined(AARCH32) && !defined(JUNO_AARCH32_EL3_RUNTIME))
/*
* For AArch32 BL31 is not applicable.
* For AArch64 BL31 is loaded in the DRAM.
* Put BL2 just below BL1.
*/
#define BL2_BASE (BL1_RW_BASE - PLAT_ARM_MAX_BL2_SIZE)
#define BL2_LIMIT BL1_RW_BASE
#else
/*
* Put BL2 just below BL31.
*/
#define BL2_BASE (BL31_BASE - PLAT_ARM_MAX_BL2_SIZE)
#define BL2_LIMIT BL31_BASE
#endif
/*******************************************************************************
* BL31 specific defines.
******************************************************************************/
#if ARM_BL31_IN_DRAM
/*
* Put BL31 at the bottom of TZC secured DRAM
*/
#define BL31_BASE ARM_AP_TZC_DRAM1_BASE
#define BL31_LIMIT (ARM_AP_TZC_DRAM1_BASE + \
PLAT_ARM_MAX_BL31_SIZE)
#elif (RESET_TO_BL31)
/*
* Put BL31_BASE in the middle of the Trusted SRAM.
*/
#define BL31_BASE (ARM_TRUSTED_SRAM_BASE + \
(PLAT_ARM_TRUSTED_SRAM_SIZE >> 1))
#define BL31_LIMIT (ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE)
#else
/*
* Put BL31 at the top of the Trusted SRAM.
*/
#define BL31_BASE (ARM_BL_RAM_BASE + \
ARM_BL_RAM_SIZE - \
PLAT_ARM_MAX_BL31_SIZE)
#define BL31_PROGBITS_LIMIT BL1_RW_BASE
#define BL31_LIMIT (ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE)
#endif
/*******************************************************************************
* BL32 specific defines.
******************************************************************************/
/*
* On ARM standard platforms, the TSP can execute from Trusted SRAM,
* Trusted DRAM (if available) or the DRAM region secured by the TrustZone
* controller.
*/
#if ENABLE_SPM
# define TSP_SEC_MEM_BASE (ARM_AP_TZC_DRAM1_BASE + ULL(0x200000))
# define TSP_SEC_MEM_SIZE (ARM_AP_TZC_DRAM1_SIZE - ULL(0x200000))
# define BL32_BASE (ARM_AP_TZC_DRAM1_BASE + ULL(0x200000))
# define BL32_LIMIT (ARM_AP_TZC_DRAM1_BASE + \
ARM_AP_TZC_DRAM1_SIZE)
#elif ARM_BL31_IN_DRAM
# define TSP_SEC_MEM_BASE (ARM_AP_TZC_DRAM1_BASE + \
PLAT_ARM_MAX_BL31_SIZE)
# define TSP_SEC_MEM_SIZE (ARM_AP_TZC_DRAM1_SIZE - \
PLAT_ARM_MAX_BL31_SIZE)
# define BL32_BASE (ARM_AP_TZC_DRAM1_BASE + \
PLAT_ARM_MAX_BL31_SIZE)
# define BL32_LIMIT (ARM_AP_TZC_DRAM1_BASE + \
ARM_AP_TZC_DRAM1_SIZE)
#elif ARM_TSP_RAM_LOCATION_ID == ARM_TRUSTED_SRAM_ID
# define TSP_SEC_MEM_BASE ARM_BL_RAM_BASE
# define TSP_SEC_MEM_SIZE ARM_BL_RAM_SIZE
# define TSP_PROGBITS_LIMIT BL2_BASE
# define BL32_BASE ARM_BL_RAM_BASE
# define BL32_LIMIT BL31_BASE
#elif ARM_TSP_RAM_LOCATION_ID == ARM_TRUSTED_DRAM_ID
# define TSP_SEC_MEM_BASE PLAT_ARM_TRUSTED_DRAM_BASE
# define TSP_SEC_MEM_SIZE PLAT_ARM_TRUSTED_DRAM_SIZE
# define BL32_BASE PLAT_ARM_TRUSTED_DRAM_BASE
# define BL32_LIMIT (PLAT_ARM_TRUSTED_DRAM_BASE \
+ (1 << 21))
#elif ARM_TSP_RAM_LOCATION_ID == ARM_DRAM_ID
# define TSP_SEC_MEM_BASE ARM_AP_TZC_DRAM1_BASE
# define TSP_SEC_MEM_SIZE ARM_AP_TZC_DRAM1_SIZE
# define BL32_BASE ARM_AP_TZC_DRAM1_BASE
# define BL32_LIMIT (ARM_AP_TZC_DRAM1_BASE + \
ARM_AP_TZC_DRAM1_SIZE)
#else
# error "Unsupported ARM_TSP_RAM_LOCATION_ID value"
#endif
/*
* BL32 is mandatory in AArch32. In AArch64, undefine BL32_BASE if there is no
* SPD and no SPM, as they are the only ones that can be used as BL32.
*/
#ifndef AARCH32
# if defined(SPD_none) && !ENABLE_SPM
# undef BL32_BASE
# endif
#endif
/*******************************************************************************
* FWU Images: NS_BL1U, BL2U & NS_BL2U defines.
******************************************************************************/
#define BL2U_BASE BL2_BASE
#if ARM_BL31_IN_DRAM || (defined(AARCH32) && !defined(JUNO_AARCH32_EL3_RUNTIME))
/*
* For AArch32 BL31 is not applicable.
* For AArch64 BL31 is loaded in the DRAM.
* BL2U extends up to BL1.
*/
#define BL2U_LIMIT BL1_RW_BASE
#else
/* BL2U extends up to BL31. */
#define BL2U_LIMIT BL31_BASE
#endif
#define NS_BL2U_BASE ARM_NS_DRAM1_BASE
#define NS_BL1U_BASE (PLAT_ARM_NVM_BASE + 0x03EB8000)
/*
* ID of the secure physical generic timer interrupt used by the TSP.
*/
#define TSP_IRQ_SEC_PHY_TIMER ARM_IRQ_SEC_PHY_TIMER
/*
* One cache line needed for bakery locks on ARM platforms
*/
#define PLAT_PERCPU_BAKERY_LOCK_SIZE (1 * CACHE_WRITEBACK_GRANULE)
/* Priority levels for ARM platforms */
#define PLAT_SDEI_CRITICAL_PRI 0x60
#define PLAT_SDEI_NORMAL_PRI 0x70
/* ARM platforms use 3 upper bits of secure interrupt priority */
#define ARM_PRI_BITS 3
/* SGI used for SDEI signalling */
#define ARM_SDEI_SGI ARM_IRQ_SEC_SGI_0
/* ARM SDEI dynamic private event numbers */
#define ARM_SDEI_DP_EVENT_0 1000
#define ARM_SDEI_DP_EVENT_1 1001
#define ARM_SDEI_DP_EVENT_2 1002
/* ARM SDEI dynamic shared event numbers */
#define ARM_SDEI_DS_EVENT_0 2000
#define ARM_SDEI_DS_EVENT_1 2001
#define ARM_SDEI_DS_EVENT_2 2002
#endif /* __ARM_DEF_H__ */