layerscape: Initial TF-A support for LS1043ardb
This patch introduce TF-A support for NXP's ls1043a platform.
more details information of ls1043a chip and ls1043ardb board
can be found at docs/plat/ls1043a.rst.
Boot sequence on ls1043a is: bootrom loads bl1 firstly, then bl1
loads bl2, bl2 will load bl31, bl32 and bl33, bl31 will boot
bl32(tee os) and bl33(u-boot or uefi), bl33 boot Linux kernel.
Now TF-A on ls1043ardb platform has the following features in this patch:
* Support boot from Nor flash.
* TF-A can boot bl33 which runs in el2 of non-secure world.
* TF-A boot OPTee OS.
* Support PSCI
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Signed-off-by: Chenyin.Ha <Chenyin.Ha@nxp.com>
Signed-off-by: Chenhui Zhao <chenhui.zhao@nxp.com>
Signed-off-by: jiaheng.fan <jiaheng.fan@nxp.com>
Signed-off-by: Wen He <wen.he_1@nxp.com>
diff --git a/plat/layerscape/common/ls_bl1_setup.c b/plat/layerscape/common/ls_bl1_setup.c
new file mode 100644
index 0000000..43f7450
--- /dev/null
+++ b/plat/layerscape/common/ls_bl1_setup.c
@@ -0,0 +1,89 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <debug.h>
+#include "ls_16550.h"
+#include "plat_ls.h"
+#include "../../../bl1/bl1_private.h"
+
+/* Data structure which holds the extents of the trusted SRAM for BL1*/
+static meminfo_t bl1_tzram_layout;
+
+meminfo_t *bl1_plat_sec_mem_layout(void)
+{
+ return &bl1_tzram_layout;
+}
+
+/*******************************************************************************
+ * BL1 specific platform actions shared between ARM standard platforms.
+ ******************************************************************************/
+void ls_bl1_early_platform_setup(void)
+{
+ static console_ls_16550_t console;
+
+#if !LS1043_DISABLE_TRUSTED_WDOG
+ /* TODO: Enable watchdog */
+
+#endif
+
+ /* Initialize the console to provide early debug support */
+ console_ls_16550_register(LS_TF_UART_BASE, LS_TF_UART_CLOCK,
+ LS_TF_UART_BAUDRATE, &console);
+
+ /* Allow BL1 to see the whole Trusted RAM */
+ bl1_tzram_layout.total_base = LS_SRAM_BASE;
+ bl1_tzram_layout.total_size = LS_SRAM_SIZE;
+}
+
+/******************************************************************************
+ * Perform the very early platform specific architecture setup shared between
+ * ARM standard platforms. This only does basic initialization. Later
+ * architectural setup (bl1_arch_setup()) does not do anything platform
+ * specific.
+ *****************************************************************************/
+void ls_bl1_plat_arch_setup(void)
+{
+ ls_setup_page_tables(bl1_tzram_layout.total_base,
+ bl1_tzram_layout.total_size,
+ BL_CODE_BASE,
+ BL1_CODE_END,
+ BL1_RO_DATA_BASE,
+ BL1_RO_DATA_END
+#if USE_COHERENT_MEM
+ , BL_COHERENT_RAM_BASE,
+ BL_COHERENT_RAM_END
+#endif
+ );
+ VERBOSE("After setup the page tables\n");
+#ifdef AARCH32
+ enable_mmu_secure(0);
+#else
+ enable_mmu_el3(0);
+#endif /* AARCH32 */
+ VERBOSE("After MMU enabled\n");
+}
+
+void bl1_plat_arch_setup(void)
+{
+ ls_bl1_plat_arch_setup();
+}
+
+/*
+ * Perform the platform specific architecture setup shared between
+ * ARM standard platforms.
+ */
+void ls_bl1_platform_setup(void)
+{
+ /* Initialise the IO layer and register platform IO devices */
+ plat_ls_io_setup();
+}
+
+void bl1_plat_prepare_exit(entry_point_info_t *ep_info)
+{
+#if !LS1043_DISABLE_TRUSTED_WDOG
+ /*TODO: Disable watchdog before leaving BL1 */
+#endif
+}