blob: 02b7562927bc9ff73070993f56071cc58a4f5c47 [file] [log] [blame]
/*
* Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef __PLATFORM_DEF_H__
#define __PLATFORM_DEF_H__
#include <arch.h>
#include "../hikey_def.h"
/* Special value used to verify platform parameters from BL2 to BL3-1 */
#define HIKEY_BL31_PLAT_PARAM_VAL 0x0f1e2d3c4b5a6978ULL
/*
* Generic platform constants
*/
/* Size of cacheable stacks */
#define PLATFORM_STACK_SIZE 0x800
#define FIRMWARE_WELCOME_STR "Booting Trusted Firmware\n"
#define PLATFORM_CACHE_LINE_SIZE 64
#define PLATFORM_CLUSTER_COUNT 2
#define PLATFORM_CORE_COUNT_PER_CLUSTER 4
#define PLATFORM_CORE_COUNT (PLATFORM_CLUSTER_COUNT * \
PLATFORM_CORE_COUNT_PER_CLUSTER)
#define PLAT_MAX_PWR_LVL MPIDR_AFFLVL2
#define PLAT_NUM_PWR_DOMAINS (PLATFORM_CORE_COUNT + \
PLATFORM_CLUSTER_COUNT + 1)
#define PLAT_MAX_RET_STATE 1
#define PLAT_MAX_OFF_STATE 2
#define MAX_IO_DEVICES 3
#define MAX_IO_HANDLES 4
/* eMMC RPMB and eMMC User Data */
#define MAX_IO_BLOCK_DEVICES 2
/* GIC related constants (no GICR in GIC-400) */
#define PLAT_ARM_GICD_BASE 0xF6801000
#define PLAT_ARM_GICC_BASE 0xF6802000
#define PLAT_ARM_GICH_BASE 0xF6804000
#define PLAT_ARM_GICV_BASE 0xF6806000
/*
* Platform memory map related constants
*/
/*
* BL1 is stored in XG2RAM0_HIRQ that is 784KB large (0xF980_0000~0xF98C_4000).
*/
#define ONCHIPROM_PARAM_BASE (XG2RAM0_BASE + 0x700)
#define LOADER_RAM_BASE (XG2RAM0_BASE + 0x800)
#define BL1_XG2RAM0_OFFSET 0x1000
/*
* BL1 specific defines.
*
* Both loader and BL1_RO region stay in SRAM since they are used to simulate
* ROM.
* Loader is used to switch Hi6220 SoC from 32-bit to 64-bit mode.
*
* ++++++++++ 0xF980_0000
* + loader +
* ++++++++++ 0xF980_1000
* + BL1_RO +
* ++++++++++ 0xF981_0000
* + BL1_RW +
* ++++++++++ 0xF989_8000
*/
#define BL1_RO_BASE (XG2RAM0_BASE + BL1_XG2RAM0_OFFSET)
#define BL1_RO_LIMIT (XG2RAM0_BASE + 0x10000)
#define BL1_RW_BASE (BL1_RO_LIMIT) /* 0xf981_0000 */
#define BL1_RW_SIZE (0x00088000)
#define BL1_RW_LIMIT (0xF9898000)
/*
* BL2 specific defines.
*/
#define BL2_BASE (BL1_RW_BASE + 0x8000) /* 0xf981_8000 */
#define BL2_LIMIT (BL2_BASE + 0x40000)
/*
* SCP_BL2 specific defines.
* In HiKey, SCP_BL2 means MCU firmware. It's loaded into the temporary buffer
* at 0x0100_0000. Then BL2 will parse the sections and loaded them into
* predefined separated buffers.
*/
#define SCP_BL2_BASE (DDR_BASE + 0x01000000)
#define SCP_BL2_LIMIT (SCP_BL2_BASE + 0x00100000)
#define SCP_BL2_SIZE (SCP_BL2_LIMIT - SCP_BL2_BASE)
/*
* BL31 specific defines.
*/
#define BL31_BASE BL2_LIMIT /* 0xf985_8000 */
#define BL31_LIMIT 0xF9898000
/*
* BL3-2 specific defines.
*/
/*
* The TSP currently executes from TZC secured area of DRAM or SRAM.
*/
#define BL32_SRAM_BASE BL31_LIMIT
#define BL32_SRAM_LIMIT (BL31_LIMIT+0x80000) /* 512K */
#define BL32_DRAM_BASE DDR_SEC_BASE
#define BL32_DRAM_LIMIT (DDR_SEC_BASE+DDR_SEC_SIZE)
#if LOAD_IMAGE_V2
#ifdef SPD_opteed
/* Load pageable part of OP-TEE at end of allocated DRAM space for BL32 */
#define HIKEY_OPTEE_PAGEABLE_LOAD_BASE (BL32_DRAM_LIMIT - HIKEY_OPTEE_PAGEABLE_LOAD_SIZE) /* 0x3FC0_0000 */
#define HIKEY_OPTEE_PAGEABLE_LOAD_SIZE 0x400000 /* 4MB */
#endif
#endif
#if (HIKEY_TSP_RAM_LOCATION_ID == HIKEY_DRAM_ID)
#define TSP_SEC_MEM_BASE BL32_DRAM_BASE
#define TSP_SEC_MEM_SIZE (BL32_DRAM_LIMIT - BL32_DRAM_BASE)
#define BL32_BASE BL32_DRAM_BASE
#define BL32_LIMIT BL32_DRAM_LIMIT
#elif (HIKEY_TSP_RAM_LOCATION_ID == HIKEY_SRAM_ID)
#define TSP_SEC_MEM_BASE BL32_SRAM_BASE
#define TSP_SEC_MEM_SIZE (BL32_SRAM_LIMIT - BL32_SRAM_BASE)
#define BL32_BASE BL32_SRAM_BASE
#define BL32_LIMIT BL32_SRAM_LIMIT
#else
#error "Currently unsupported HIKEY_TSP_LOCATION_ID value"
#endif
/* BL32 is mandatory in AArch32 */
#ifndef AARCH32
#ifdef SPD_none
#undef BL32_BASE
#endif /* SPD_none */
#endif
#define NS_BL1U_BASE (BL2_BASE)
#define NS_BL1U_SIZE (0x00010000)
#define NS_BL1U_LIMIT (NS_BL1U_BASE + NS_BL1U_SIZE)
/*
* Platform specific page table and MMU setup constants
*/
#define ADDR_SPACE_SIZE (1ULL << 32)
#if defined(IMAGE_BL1) || defined(IMAGE_BL32)
#define MAX_XLAT_TABLES 3
#endif
#ifdef IMAGE_BL31
#define MAX_XLAT_TABLES 4
#endif
#ifdef IMAGE_BL2
#if LOAD_IMAGE_V2
#ifdef SPD_opteed
#define MAX_XLAT_TABLES 4
#else
#define MAX_XLAT_TABLES 3
#endif
#else
#define MAX_XLAT_TABLES 3
#endif
#endif
#define MAX_MMAP_REGIONS 16
#define HIKEY_NS_IMAGE_OFFSET (DDR_BASE + 0x35000000)
/*
* Declarations and constants to access the mailboxes safely. Each mailbox is
* aligned on the biggest cache line size in the platform. This is known only
* to the platform as it might have a combination of integrated and external
* caches. Such alignment ensures that two maiboxes do not sit on the same cache
* line at any cache level. They could belong to different cpus/clusters &
* get written while being protected by different locks causing corruption of
* a valid mailbox address.
*/
#define CACHE_WRITEBACK_SHIFT 6
#define CACHE_WRITEBACK_GRANULE (1 << CACHE_WRITEBACK_SHIFT)
#endif /* __PLATFORM_DEF_H__ */