Merge changes I23f600b5,Icf9ffdf2,Iee7a51d1,I99afc312,I4bf8e8c0, ... into integration
* changes:
plat/marvell/armada: cleanup MSS SRAM if used for copy
plat/marvell: cn913x: allow CP1/CP2 mapping at BLE stage
plat/marvell/armada/common/mss: use MSS SRAM in secure mode
include/drivers/marvell/mochi: add detection of secure mode
plat/marvell: fix SPD handling in dram port
marvell: drivers: move XOR0/1 DIOB from WIN 0 to 1
drivers/marvell/mochi: add support for cn913x in PCIe EP mode
drivers/marvell/mochi: add missing stream IDs configurations
plat/marvell/armada/a8k: support HW RNG by SMC
drivers/rambus: add TRNG-IP-76 driver
diff --git a/drivers/marvell/iob.c b/drivers/marvell/iob.c
index 87f147a..29088aa 100644
--- a/drivers/marvell/iob.c
+++ b/drivers/marvell/iob.c
@@ -44,6 +44,10 @@
#define IOB_WIN_ALR_OFFSET(win) (iob_base + 0x8 + (0x20 * win))
#define IOB_WIN_AHR_OFFSET(win) (iob_base + 0xC + (0x20 * win))
+#define IOB_WIN_DIOB_CR_OFFSET(win) (iob_base + 0x10 + (0x20 * win))
+#define IOB_WIN_XOR0_DIOB_EN BIT(0)
+#define IOB_WIN_XOR1_DIOB_EN BIT(1)
+
uintptr_t iob_base;
static void iob_win_check(struct addr_map_win *win, uint32_t win_num)
@@ -71,6 +75,17 @@
uint32_t iob_win_reg;
uint32_t alr, ahr;
uint64_t end_addr;
+ uint32_t reg_en;
+
+ /* move XOR (DMA) to use WIN1 which is used for PCI-EP address space */
+ reg_en = IOB_WIN_XOR0_DIOB_EN | IOB_WIN_XOR1_DIOB_EN;
+ iob_win_reg = mmio_read_32(IOB_WIN_DIOB_CR_OFFSET(0));
+ iob_win_reg &= ~reg_en;
+ mmio_write_32(IOB_WIN_DIOB_CR_OFFSET(0), iob_win_reg);
+
+ iob_win_reg = mmio_read_32(IOB_WIN_DIOB_CR_OFFSET(1));
+ iob_win_reg |= reg_en;
+ mmio_write_32(IOB_WIN_DIOB_CR_OFFSET(1), iob_win_reg);
end_addr = (win->base_addr + win->win_size - 1);
alr = (uint32_t)((win->base_addr >> ADDRESS_SHIFT) & ADDRESS_MASK);
diff --git a/drivers/marvell/mochi/ap807_setup.c b/drivers/marvell/mochi/ap807_setup.c
index 1069f8c..75e9654 100644
--- a/drivers/marvell/mochi/ap807_setup.c
+++ b/drivers/marvell/mochi/ap807_setup.c
@@ -15,8 +15,9 @@
#include <drivers/marvell/mci.h>
#include <drivers/marvell/mochi/ap_setup.h>
#include <lib/mmio.h>
+#include <lib/utils_def.h>
-#include <mvebu_def.h>
+#include <a8k_plat_def.h>
#define SMMU_sACR (MVEBU_SMMU_BASE + 0x10)
#define SMMU_sACR_PG_64K (1 << 16)
@@ -71,6 +72,23 @@
#define MVEBU_AXI_ATTR_REG(index) (MVEBU_AXI_ATTR_BASE + \
0x4 * index)
+#define XOR_STREAM_ID_REG(ch) (MVEBU_REGS_BASE + 0x410010 + (ch) * 0x20000)
+#define XOR_STREAM_ID_MASK 0xFFFF
+#define SDIO_STREAM_ID_REG (MVEBU_RFU_BASE + 0x4600)
+#define SDIO_STREAM_ID_MASK 0xFF
+
+/* Do not use the default Stream ID 0 */
+#define A807_STREAM_ID_BASE (0x1)
+
+static uintptr_t stream_id_reg[] = {
+ XOR_STREAM_ID_REG(0),
+ XOR_STREAM_ID_REG(1),
+ XOR_STREAM_ID_REG(2),
+ XOR_STREAM_ID_REG(3),
+ SDIO_STREAM_ID_REG,
+ 0
+};
+
enum axi_attr {
AXI_SDIO_ATTR = 0,
AXI_DFX_ATTR,
@@ -162,6 +180,21 @@
MCI_REMAP_OFF_SHIFT);
}
+/* Set a unique stream id for all DMA capable devices */
+static void ap807_stream_id_init(void)
+{
+ uint32_t i;
+
+ for (i = 0;
+ stream_id_reg[i] != 0 && i < ARRAY_SIZE(stream_id_reg); i++) {
+ uint32_t mask = stream_id_reg[i] == SDIO_STREAM_ID_REG ?
+ SDIO_STREAM_ID_MASK : XOR_STREAM_ID_MASK;
+
+ mmio_clrsetbits_32(stream_id_reg[i], mask,
+ i + A807_STREAM_ID_BASE);
+ }
+}
+
static void ap807_axi_attr_init(void)
{
uint32_t index, data;
@@ -265,6 +298,9 @@
/* configure CCU windows */
init_ccu(MVEBU_AP0);
+ /* Set the stream IDs for DMA masters */
+ ap807_stream_id_init();
+
/* configure the SMMU */
setup_smmu();
diff --git a/drivers/marvell/mochi/apn806_setup.c b/drivers/marvell/mochi/apn806_setup.c
index 8c3ba92..5c71fed 100644
--- a/drivers/marvell/mochi/apn806_setup.c
+++ b/drivers/marvell/mochi/apn806_setup.c
@@ -15,7 +15,7 @@
#include <drivers/marvell/mochi/ap_setup.h>
#include <lib/mmio.h>
-#include <mvebu_def.h>
+#include <a8k_plat_def.h>
#define SMMU_sACR (MVEBU_SMMU_BASE + 0x10)
#define SMMU_sACR_PG_64K (1 << 16)
@@ -67,6 +67,23 @@
#define MVEBU_AXI_ATTR_REG(index) (MVEBU_AXI_ATTR_BASE + \
0x4 * index)
+#define XOR_STREAM_ID_REG(ch) (MVEBU_REGS_BASE + 0x410010 + (ch) * 0x20000)
+#define XOR_STREAM_ID_MASK 0xFFFF
+#define SDIO_STREAM_ID_REG (MVEBU_RFU_BASE + 0x4600)
+#define SDIO_STREAM_ID_MASK 0xFF
+
+/* Do not use the default Stream ID 0 */
+#define A806_STREAM_ID_BASE (0x1)
+
+static uintptr_t stream_id_reg[] = {
+ XOR_STREAM_ID_REG(0),
+ XOR_STREAM_ID_REG(1),
+ XOR_STREAM_ID_REG(2),
+ XOR_STREAM_ID_REG(3),
+ SDIO_STREAM_ID_REG,
+ 0
+};
+
enum axi_attr {
AXI_SDIO_ATTR = 0,
AXI_DFX_ATTR,
@@ -158,6 +175,20 @@
MCI_REMAP_OFF_SHIFT);
}
+/* Set a unique stream id for all DMA capable devices */
+static void ap806_stream_id_init(void)
+{
+ int i;
+
+ for (i = 0; stream_id_reg[i] != 0; i++) {
+ uint32_t mask = stream_id_reg[i] == SDIO_STREAM_ID_REG ?
+ SDIO_STREAM_ID_MASK : XOR_STREAM_ID_MASK;
+
+ mmio_clrsetbits_32(stream_id_reg[i], mask,
+ i + A806_STREAM_ID_BASE);
+ }
+}
+
static void apn806_axi_attr_init(void)
{
uint32_t index, data;
@@ -236,6 +267,9 @@
/* configure DSS */
dss_setup();
+ /* Set the stream IDs for DMA masters */
+ ap806_stream_id_init();
+
/* configure the SMMU */
setup_smmu();
diff --git a/drivers/marvell/mochi/cp110_setup.c b/drivers/marvell/mochi/cp110_setup.c
index 0fa0497..906df66 100644
--- a/drivers/marvell/mochi/cp110_setup.c
+++ b/drivers/marvell/mochi/cp110_setup.c
@@ -12,6 +12,7 @@
#include <drivers/marvell/amb_adec.h>
#include <drivers/marvell/iob.h>
#include <drivers/marvell/mochi/cp110_setup.h>
+#include <drivers/rambus/trng_ip_76.h>
#include <plat_marvell.h>
@@ -105,6 +106,11 @@
#define MVEBU_RTC_READ_OUTPUT_DELAY_MASK 0xFFFF
#define MVEBU_RTC_READ_OUTPUT_DELAY_DEFAULT 0x1F
+/*******************************************************************************
+ * TRNG Configuration
+ ******************************************************************************/
+#define MVEBU_TRNG_BASE (0x760000)
+
enum axi_attr {
AXI_ADUNIT_ATTR = 0,
AXI_COMUNIT_ATTR,
@@ -130,7 +136,7 @@
#define USB3H_1_STREAM_ID_REG (RFU_STREAM_ID_BASE + 0x10)
#define SATA_0_STREAM_ID_REG (RFU_STREAM_ID_BASE + 0x14)
#define SATA_1_STREAM_ID_REG (RFU_STREAM_ID_BASE + 0x18)
-#define SDIO_0_STREAM_ID_REG (RFU_STREAM_ID_BASE + 0x28)
+#define SDIO_STREAM_ID_REG (RFU_STREAM_ID_BASE + 0x28)
#define CP_DMA_0_STREAM_ID_REG (0x6B0010)
#define CP_DMA_1_STREAM_ID_REG (0x6D0010)
@@ -138,14 +144,14 @@
/* We allocate IDs 128-255 for PCIe */
#define MAX_STREAM_ID (0x80)
-uintptr_t stream_id_reg[] = {
+static uintptr_t stream_id_reg[] = {
USB3H_0_STREAM_ID_REG,
USB3H_1_STREAM_ID_REG,
CP_DMA_0_STREAM_ID_REG,
CP_DMA_1_STREAM_ID_REG,
SATA_0_STREAM_ID_REG,
SATA_1_STREAM_ID_REG,
- SDIO_0_STREAM_ID_REG,
+ SDIO_STREAM_ID_REG,
0
};
@@ -180,8 +186,9 @@
pcie0_clk = (reg & SAR_PCIE0_CLK_CFG_MASK) >> SAR_PCIE0_CLK_CFG_OFFSET;
pcie1_clk = (reg & SAR_PCIE1_CLK_CFG_MASK) >> SAR_PCIE1_CLK_CFG_OFFSET;
- /* CP110 revision A2 */
- if (cp110_rev_id_get(base) == MVEBU_CP110_REF_ID_A2) {
+ /* CP110 revision A2 or CN913x */
+ if (cp110_rev_id_get(base) == MVEBU_CP110_REF_ID_A2 ||
+ cp110_device_id_get(base) == MVEBU_CN9130_DEV_ID) {
/*
* PCIe Reference Clock Buffer Control register must be
* set according to the clock direction (input/output)
@@ -378,6 +385,20 @@
init_amb_adec(base);
}
+static void cp110_trng_init(uintptr_t base)
+{
+ static bool done;
+ int ret;
+
+ if (!done) {
+ ret = eip76_rng_probe(base + MVEBU_TRNG_BASE);
+ if (ret != 0) {
+ ERROR("Failed to init TRNG @ 0x%lx\n", base);
+ return;
+ }
+ done = true;
+ }
+}
void cp110_init(uintptr_t cp110_base, uint32_t stream_id)
{
INFO("%s: Initialize CPx - base = %lx\n", __func__, cp110_base);
@@ -405,6 +426,9 @@
/* Reset RTC if needed */
cp110_rtc_init(cp110_base);
+
+ /* TRNG init - for CP0 only */
+ cp110_trng_init(cp110_base);
}
/* Do the minimal setup required to configure the CP in BLE */
diff --git a/drivers/rambus/trng_ip_76.c b/drivers/rambus/trng_ip_76.c
new file mode 100644
index 0000000..8de12e9
--- /dev/null
+++ b/drivers/rambus/trng_ip_76.c
@@ -0,0 +1,249 @@
+/*
+ * Copyright (c) 2020, Marvell Technology Group Ltd. All rights reserved.
+ *
+ * Based on Linux kernel omap-rng.c - RNG driver for TI OMAP CPU family
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2005 (c) MontaVista Software, Inc.
+ *
+ * Mostly based on original driver:
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <errno.h>
+#include <string.h>
+
+#include <common/debug.h>
+#include <drivers/delay_timer.h>
+#include <drivers/rambus/trng_ip_76.h>
+#include <lib/mmio.h>
+#include <lib/spinlock.h>
+#include <lib/utils.h>
+
+#define RNG_REG_STATUS_RDY (1 << 0)
+
+#define RNG_REG_INTACK_RDY_MASK (1 << 0)
+
+#define RNG_CONTROL_ENABLE_TRNG_MASK (1 << 10)
+
+#define RNG_CONFIG_NOISE_BLOCKS(val) ((0xff & (val)) << 0)
+#define RNG_CONFIG_NOISE_BLK_VAL 0x5
+
+#define RNG_CONFIG_SAMPLE_CYCLES(val) ((0xff & (val)) << 16)
+#define RNG_CONFIG_SAMPLE_CYCLES_VAL 0x22
+
+#define RNG_REG_FRO_ENABLE_MASK 0xffffff
+#define RNG_REG_FRO_DETUNE_MASK 0x0
+
+#define EIP76_RNG_OUTPUT_SIZE 0x10
+#define EIP76_RNG_WAIT_ROUNDS 10
+
+#define RNG_HW_IS_EIP76(ver) ((ver) & (0xff == 0x4C))
+#define RNG_HW_VER_MAJOR(ver) (((ver) & (0xf << 24)) >> 24)
+#define RNG_HW_VER_MINOR(ver) (((ver) & (0xf << 20)) >> 20)
+#define RNG_HW_VER_PATCH(ver) (((ver) & (0xf << 16)) >> 16)
+
+
+enum {
+ RNG_OUTPUT_0_REG = 0,
+ RNG_OUTPUT_1_REG,
+ RNG_OUTPUT_2_REG,
+ RNG_OUTPUT_3_REG,
+ RNG_STATUS_REG,
+ RNG_INTMASK_REG,
+ RNG_INTACK_REG,
+ RNG_CONTROL_REG,
+ RNG_CONFIG_REG,
+ RNG_ALARMCNT_REG,
+ RNG_FROENABLE_REG,
+ RNG_FRODETUNE_REG,
+ RNG_ALARMMASK_REG,
+ RNG_ALARMSTOP_REG,
+ RNG_REV_REG
+};
+
+static uint16_t reg_map_eip76[] = {
+ [RNG_OUTPUT_0_REG] = 0x0,
+ [RNG_OUTPUT_1_REG] = 0x4,
+ [RNG_OUTPUT_2_REG] = 0x8,
+ [RNG_OUTPUT_3_REG] = 0xc,
+ [RNG_STATUS_REG] = 0x10,
+ [RNG_INTACK_REG] = 0x10,
+ [RNG_CONTROL_REG] = 0x14,
+ [RNG_CONFIG_REG] = 0x18,
+ [RNG_ALARMCNT_REG] = 0x1c,
+ [RNG_FROENABLE_REG] = 0x20,
+ [RNG_FRODETUNE_REG] = 0x24,
+ [RNG_ALARMMASK_REG] = 0x28,
+ [RNG_ALARMSTOP_REG] = 0x2c,
+ [RNG_REV_REG] = 0x7c,
+};
+
+struct eip76_rng_dev {
+ uintptr_t base;
+ uint16_t *regs;
+};
+
+/* Locals */
+static struct eip76_rng_dev eip76_dev;
+static spinlock_t rng_lock;
+
+static inline uint32_t eip76_rng_read(struct eip76_rng_dev *dev, uint16_t reg)
+{
+ return mmio_read_32(dev->base + dev->regs[reg]);
+}
+
+static inline void eip76_rng_write(struct eip76_rng_dev *dev,
+ uint16_t reg, uint32_t val)
+{
+ mmio_write_32(dev->base + dev->regs[reg], val);
+}
+
+static void eip76_rng_init(struct eip76_rng_dev *dev)
+{
+ uint32_t val;
+
+ /* Return if RNG is already running. */
+ if (eip76_rng_read(dev, RNG_CONTROL_REG) &
+ RNG_CONTROL_ENABLE_TRNG_MASK) {
+ return;
+ }
+
+ /* This field sets the number of 512-bit blocks of raw Noise Source
+ * output data that must be processed by either the Conditioning
+ * Function or the SP 800-90 DRBG ‘BC_DF’ functionality to yield
+ * a ‘full entropy’ output value. As according to [SP 800-90B draft]
+ * the amount of entropy input to this functionality must be twice
+ * the amount that is output and the 8-bit samples output by the Noise
+ * Source are supposed to have one bit of entropy each, the settings
+ * for this field are as follows:
+ * - SHA-1 Conditioning Function:
+ * generates 160 bits output, requiring 2560 sample bits,
+ * equivalent to 5 blocks of raw Noise Source input.
+ * - SHA-256 Conditioning Function:
+ * generates 256 bits output, requiring 4096 sample bits, equivalent
+ * to 8 blocks of raw Noise Source input. Note that two blocks of 256
+ * bits are needed to start or re-seed the SP 800-90 DRBG
+ * (in the EIP-76d-*-SHA2 configurations)
+ * - SP 800-90 DRBG ‘BC_DF’ functionality:
+ * generates 384 bits output, requiring 6144 sample bits, equivalent
+ * to 12 blocks of raw Noise Source input.
+ * This field can only be modified when ‘enable_trng’ in TRNG_CONTROL
+ * is ‘0’ or when either of the ‘test_known_noise’ or ‘test_cond_func’
+ * bits in TRNG_TEST is ‘1’. Value 0 in this field selects 256 blocks
+ * of 512 bits to be processed.
+ */
+ val = RNG_CONFIG_NOISE_BLOCKS(RNG_CONFIG_NOISE_BLK_VAL);
+
+ /* This field sets the number of FRO samples that are XOR-ed together
+ * into one bit to be shifted into the main shift register.
+ * This value must be such that there is at least one bit of entropy
+ * (in total) in each 8 bits that are shifted.
+ * This field can only be modified when ‘enable_trng’ in TRNG_CONTROL
+ * is ‘0’ or when either of the ‘test_known_noise’ or ‘test_cond_func’
+ * bits in TRNG_TEST is ‘1’. Value 0 in this field selects 65536 FRO
+ * samples to be XOR-ed together
+ */
+ val |= RNG_CONFIG_SAMPLE_CYCLES(RNG_CONFIG_SAMPLE_CYCLES_VAL);
+ eip76_rng_write(dev, RNG_CONFIG_REG, val);
+
+ /* Enable all available FROs */
+ eip76_rng_write(dev, RNG_FRODETUNE_REG, RNG_REG_FRO_DETUNE_MASK);
+ eip76_rng_write(dev, RNG_FROENABLE_REG, RNG_REG_FRO_ENABLE_MASK);
+
+ /* Enable TRNG */
+ eip76_rng_write(dev, RNG_CONTROL_REG, RNG_CONTROL_ENABLE_TRNG_MASK);
+}
+
+int32_t eip76_rng_read_rand_buf(void *data, bool wait)
+{
+ uint32_t i, present;
+
+ if (!eip76_dev.base) /* not initialized */
+ return -1;
+
+ for (i = 0; i < EIP76_RNG_WAIT_ROUNDS; i++) {
+ present = eip76_rng_read(&eip76_dev, RNG_STATUS_REG) &
+ RNG_REG_STATUS_RDY;
+ if (present || !wait) {
+ break;
+ }
+
+ udelay(10);
+ }
+
+ if (present != 0U) {
+ return 0;
+ }
+
+ memcpy(data,
+ (void *)(eip76_dev.base + eip76_dev.regs[RNG_OUTPUT_0_REG]),
+ EIP76_RNG_OUTPUT_SIZE);
+
+ eip76_rng_write(&eip76_dev, RNG_INTACK_REG, RNG_REG_INTACK_RDY_MASK);
+
+ return EIP76_RNG_OUTPUT_SIZE;
+}
+
+int32_t eip76_rng_probe(uintptr_t base_addr)
+{
+ uint32_t ver;
+
+ eip76_dev.base = base_addr;
+ eip76_dev.regs = reg_map_eip76;
+
+ eip76_rng_init(&eip76_dev);
+
+ ver = eip76_rng_read(&eip76_dev, RNG_REV_REG);
+
+ INFO("%s Random Number Generator HW ver. %01x.%01x.%01x\n",
+ RNG_HW_IS_EIP76(ver) ? "TRNG-IP-76" : "Unknown",
+ RNG_HW_VER_MAJOR(ver), RNG_HW_VER_MINOR(ver),
+ RNG_HW_VER_PATCH(ver));
+
+ return 0;
+}
+
+int32_t eip76_rng_get_random(uint8_t *data, uint32_t len)
+{
+ static uint8_t rand[EIP76_RNG_OUTPUT_SIZE];
+ static uint8_t pos;
+ uint32_t i;
+ int32_t ret = 0;
+
+ if (!data)
+ return -1;
+
+ spin_lock(&rng_lock);
+
+ for (i = 0; i < len; i++) {
+ if (pos >= EIP76_RNG_OUTPUT_SIZE) {
+ pos = 0;
+ }
+
+ if (pos != 0U) {
+ ret = eip76_rng_read_rand_buf(rand, true);
+ }
+
+ /* Only advance FIFO index if it is non zero or
+ * the update from TRNG HW was successful
+ */
+ if (pos || ret > 0) {
+ data[i] = rand[pos++];
+ ret = 0;
+ } else {
+ ret = -1;
+ break;
+ }
+ }
+
+ spin_unlock(&rng_lock);
+
+ return ret;
+}
diff --git a/include/drivers/marvell/mochi/cp110_setup.h b/include/drivers/marvell/mochi/cp110_setup.h
index 11dc4e0..4a69257 100644
--- a/include/drivers/marvell/mochi/cp110_setup.h
+++ b/include/drivers/marvell/mochi/cp110_setup.h
@@ -31,6 +31,9 @@
#define MAX_STREAM_ID_PER_CP (0x10)
#define STREAM_ID_BASE (0x40)
+#define MVEBU_SECUREBOOT_CTRL_REG (MVEBU_RFU_BASE + 0x4730)
+#define MVEBU_SECUREBOOT_EN_MASK BIT(0)
+
static inline uint32_t cp110_device_id_get(uintptr_t base)
{
/* Returns:
@@ -50,6 +53,12 @@
MVEBU_DEVICE_REV_OFFSET;
}
+static inline uint32_t is_secure(void)
+{
+ return !!(mmio_read_32(MVEBU_SECUREBOOT_CTRL_REG) &
+ MVEBU_SECUREBOOT_EN_MASK);
+}
+
void cp110_init(uintptr_t cp110_base, uint32_t stream_id);
void cp110_ble_init(uintptr_t cp110_base);
void cp110_amb_init(uintptr_t base);
diff --git a/include/drivers/rambus/trng_ip_76.h b/include/drivers/rambus/trng_ip_76.h
new file mode 100644
index 0000000..6de8fc7
--- /dev/null
+++ b/include/drivers/rambus/trng_ip_76.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2020, Marvell Technology Group Ltd. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+
+#ifndef __TRNG_IP_76_H__
+#define __TRNG_IP_76_H__
+
+#include <stdbool.h>
+#include <stdint.h>
+
+int32_t eip76_rng_read_rand_buf(void *data, bool wait);
+int32_t eip76_rng_probe(uintptr_t base_addr);
+int32_t eip76_rng_get_random(uint8_t *data, uint32_t len);
+
+#endif /* __TRNG_IP_76_H__ */
diff --git a/plat/marvell/armada/a8k/a80x0/board/dram_port.c b/plat/marvell/armada/a8k/a80x0/board/dram_port.c
index 381c871..47bc0a8 100644
--- a/plat/marvell/armada/a8k/a80x0/board/dram_port.c
+++ b/plat/marvell/armada/a8k/a80x0/board/dram_port.c
@@ -138,7 +138,7 @@
i2c_init((void *)MVEBU_CP0_I2C_BASE);
/* select SPD memory page 0 to access DRAM configuration */
- i2c_write(I2C_SPD_P0_ADDR, 0x0, 1, tm->spd_data.all_bytes, 1);
+ i2c_write(I2C_SPD_P0_ADDR, 0x0, 1, tm->spd_data.all_bytes, 0);
/* read data from spd */
i2c_read(I2C_SPD_ADDR, 0x0, 1, tm->spd_data.all_bytes,
diff --git a/plat/marvell/armada/a8k/a80x0_mcbin/board/dram_port.c b/plat/marvell/armada/a8k/a80x0_mcbin/board/dram_port.c
index 50a68b3..85c931c 100644
--- a/plat/marvell/armada/a8k/a80x0_mcbin/board/dram_port.c
+++ b/plat/marvell/armada/a8k/a80x0_mcbin/board/dram_port.c
@@ -123,7 +123,7 @@
/* initialize the i2c */
i2c_init((void *)MVEBU_CP0_I2C_BASE);
/* select SPD memory page 0 to access DRAM configuration */
- i2c_write(I2C_SPD_P0_ADDR, 0x0, 1, tm->spd_data.all_bytes, 1);
+ i2c_write(I2C_SPD_P0_ADDR, 0x0, 1, tm->spd_data.all_bytes, 0);
/* read data from spd */
i2c_read(I2C_SPD_ADDR, 0x0, 1, tm->spd_data.all_bytes,
sizeof(tm->spd_data.all_bytes));
diff --git a/plat/marvell/armada/a8k/a80x0_puzzle/board/dram_port.c b/plat/marvell/armada/a8k/a80x0_puzzle/board/dram_port.c
index 3879c98..1d8e9d2 100644
--- a/plat/marvell/armada/a8k/a80x0_puzzle/board/dram_port.c
+++ b/plat/marvell/armada/a8k/a80x0_puzzle/board/dram_port.c
@@ -132,7 +132,7 @@
/* initialize the MVEBU_AP_I2C_BASE I2C bus */
i2c_init((void *)MVEBU_AP_I2C_BASE);
/* select SPD memory page 0 to access DRAM configuration */
- i2c_write(I2C_SPD_P0_ADDR, 0x0, 1, tm->spd_data.all_bytes, 1);
+ i2c_write(I2C_SPD_P0_ADDR, 0x0, 1, tm->spd_data.all_bytes, 0);
/* read data from spd */
i2c_read(I2C_SPD_ADDR, 0x0, 1, tm->spd_data.all_bytes,
sizeof(tm->spd_data.all_bytes));
diff --git a/plat/marvell/armada/a8k/common/a8k_common.mk b/plat/marvell/armada/a8k/common/a8k_common.mk
index 63cfce2..8a463ea 100644
--- a/plat/marvell/armada/a8k/common/a8k_common.mk
+++ b/plat/marvell/armada/a8k/common/a8k_common.mk
@@ -114,7 +114,8 @@
$(MARVELL_DRV_BASE)/cache_llc.c \
$(MARVELL_DRV_BASE)/comphy/phy-comphy-cp110.c \
$(MARVELL_DRV_BASE)/mc_trustzone/mc_trustzone.c \
- $(MARVELL_DRV_BASE)/mg_conf_cm3/mg_conf_cm3.c
+ $(MARVELL_DRV_BASE)/mg_conf_cm3/mg_conf_cm3.c \
+ drivers/rambus/trng_ip_76.c
BL31_PORTING_SOURCES := $(BOARD_DIR)/board/marvell_plat_config.c
diff --git a/plat/marvell/armada/a8k/common/ble/ble.mk b/plat/marvell/armada/a8k/common/ble/ble.mk
index 78c62a0..d6d72c1 100644
--- a/plat/marvell/armada/a8k/common/ble/ble.mk
+++ b/plat/marvell/armada/a8k/common/ble/ble.mk
@@ -13,6 +13,7 @@
BLE_SOURCES += $(BLE_PATH)/ble_main.c \
$(BLE_PATH)/ble_mem.S \
drivers/delay_timer/delay_timer.c \
+ drivers/marvell/iob.c \
$(PLAT_MARVELL)/common/aarch64/marvell_helpers.S \
$(PLAT_MARVELL)/common/plat_delay_timer.c \
$(PLAT_MARVELL)/common/marvell_console.c
diff --git a/plat/marvell/armada/a8k/common/mss/mss_bl2_setup.c b/plat/marvell/armada/a8k/common/mss/mss_bl2_setup.c
index b919cb3..71fa2b8 100644
--- a/plat/marvell/armada/a8k/common/mss/mss_bl2_setup.c
+++ b/plat/marvell/armada/a8k/common/mss/mss_bl2_setup.c
@@ -30,6 +30,10 @@
#define MSS_EXTERNAL_ADDR_MASK 0xfffffff
#define MSS_INTERNAL_ACCESS_BIT 28
+#define MSS_AP_REGS_OFFSET 0x580000
+#define MSS_CP_SRAM_OFFSET 0x220000
+#define MSS_CP_REGS_OFFSET 0x280000
+
struct addr_map_win ccu_mem_map[] = {
{MVEBU_CP_REGS_BASE(0), 0x4000000, IO_0_TID}
};
@@ -121,12 +125,21 @@
uintptr_t bl2_plat_get_cp_mss_regs(int ap_idx, int cp_idx)
{
- return MVEBU_CP_REGS_BASE(cp_idx) + 0x280000;
+ return MVEBU_CP_REGS_BASE(cp_idx) + MSS_CP_REGS_OFFSET;
+}
+
+uintptr_t bl2_plat_get_cp_mss_sram(int ap_idx, int cp_idx)
+{
+ if (is_secure()) {
+ return MVEBU_CP_REGS_BASE(cp_idx) + MSS_CP_SRAM_OFFSET;
+ }
+
+ return 0; /* SRAM will not be used */
}
uintptr_t bl2_plat_get_ap_mss_regs(int ap_idx)
{
- return MVEBU_REGS_BASE + 0x580000;
+ return MVEBU_REGS_BASE + MSS_AP_REGS_OFFSET;
}
uint32_t bl2_plat_get_cp_count(int ap_idx)
diff --git a/plat/marvell/armada/a8k/common/plat_ble_setup.c b/plat/marvell/armada/a8k/common/plat_ble_setup.c
index e4e09fb..4114327 100644
--- a/plat/marvell/armada/a8k/common/plat_ble_setup.c
+++ b/plat/marvell/armada/a8k/common/plat_ble_setup.c
@@ -720,7 +720,7 @@
int ble_plat_setup(int *skip)
{
- int ret;
+ int ret, cp;
unsigned int freq_mode;
/* Power down unused CPUs */
@@ -745,6 +745,10 @@
/* Do required CP-110 setups for BLE stage */
cp110_ble_init(MVEBU_CP_REGS_BASE(0));
+ /* Config address for each cp other than cp0 */
+ for (cp = 1; cp < CP_COUNT; cp++)
+ update_cp110_default_win(cp);
+
/* Setup AVS */
ble_plat_svc_config();
diff --git a/plat/marvell/armada/common/mrvl_sip_svc.c b/plat/marvell/armada/common/mrvl_sip_svc.c
index 0291024..64187fb 100644
--- a/plat/marvell/armada/common/mrvl_sip_svc.c
+++ b/plat/marvell/armada/common/mrvl_sip_svc.c
@@ -9,6 +9,7 @@
#include <common/runtime_svc.h>
#include <drivers/marvell/cache_llc.h>
#include <drivers/marvell/mochi/ap_setup.h>
+#include <drivers/rambus/trng_ip_76.h>
#include <lib/smccc.h>
#include <marvell_plat_priv.h>
@@ -37,6 +38,9 @@
#define MV_SIP_PMU_IRQ_ENABLE 0x82000012
#define MV_SIP_PMU_IRQ_DISABLE 0x82000013
+/* TRNG */
+#define MV_SIP_RNG_64 0xC200FF11
+
#define MAX_LANE_NR 6
#define MVEBU_COMPHY_OFFSET 0x441000
#define MVEBU_CP_BASE_MASK (~0xffffff)
@@ -68,6 +72,7 @@
u_register_t flags)
{
u_register_t ret;
+ uint32_t w2[2] = {0, 0};
int i;
debug("%s: got SMC (0x%x) x1 0x%lx, x2 0x%lx, x3 0x%lx\n",
@@ -131,7 +136,9 @@
mvebu_pmu_interrupt_disable();
SMC_RET1(handle, 0);
#endif
-
+ case MV_SIP_RNG_64:
+ ret = eip76_rng_get_random((uint8_t *)&w2, 4 * (x1 % 2 + 1));
+ SMC_RET3(handle, ret, w2[0], w2[1]);
default:
ERROR("%s: unhandled SMC (0x%x)\n", __func__, smc_fid);
SMC_RET1(handle, SMC_UNK);
diff --git a/plat/marvell/armada/common/mss/mss_scp_bl2_format.h b/plat/marvell/armada/common/mss/mss_scp_bl2_format.h
index 74dddc6..90913b0 100644
--- a/plat/marvell/armada/common/mss/mss_scp_bl2_format.h
+++ b/plat/marvell/armada/common/mss/mss_scp_bl2_format.h
@@ -13,6 +13,7 @@
#define HEADER_VERSION 0x1
#define MSS_IDRAM_SIZE 0x10000 /* 64KB */
+#define MSS_SRAM_SIZE 0x8000 /* 32KB */
/* Types definitions */
typedef struct file_header {
diff --git a/plat/marvell/armada/common/mss/mss_scp_bootloader.c b/plat/marvell/armada/common/mss/mss_scp_bootloader.c
index adf570e..f669a77 100644
--- a/plat/marvell/armada/common/mss/mss_scp_bootloader.c
+++ b/plat/marvell/armada/common/mss/mss_scp_bootloader.c
@@ -38,6 +38,8 @@
#define MSS_DMA_TIMEOUT 1000
#define MSS_EXTERNAL_SPACE 0x50000000
#define MSS_EXTERNAL_ADDR_MASK 0xfffffff
+#define MSS_INTERNAL_SPACE 0x40000000
+#define MSS_INTERNAL_ADDR_MASK 0x00ffffff
#define DMA_SIZE 128
@@ -60,60 +62,113 @@
return 0;
}
-static int mss_image_load(uint32_t src_addr, uint32_t size, uintptr_t mss_regs)
+static int mss_iram_dma_load(uint32_t src_addr, uint32_t size,
+ uintptr_t mss_regs)
{
uint32_t i, loop_num, timeout;
+ /* load image to MSS RAM using DMA */
+ loop_num = (size / DMA_SIZE) + !!(size % DMA_SIZE);
+ for (i = 0; i < loop_num; i++) {
+ /* write source address */
+ mmio_write_32(MSS_DMA_SRCBR(mss_regs),
+ src_addr + (i * DMA_SIZE));
+ /* write destination address */
+ mmio_write_32(MSS_DMA_DSTBR(mss_regs), (i * DMA_SIZE));
+ /* make sure DMA data is ready before triggering it */
+ dsb();
+ /* set the DMA control register */
+ mmio_write_32(MSS_DMA_CTRLR(mss_regs),
+ ((MSS_DMA_CTRLR_REQ_SET <<
+ MSS_DMA_CTRLR_REQ_OFFSET) |
+ (DMA_SIZE << MSS_DMA_CTRLR_SIZE_OFFSET)));
+ /* Poll DMA_ACK at MSS_DMACTLR until it is ready */
+ timeout = MSS_DMA_TIMEOUT;
+ while (timeout > 0U) {
+ if ((mmio_read_32(MSS_DMA_CTRLR(mss_regs)) >>
+ (MSS_DMA_CTRLR_ACK_OFFSET &
+ MSS_DMA_CTRLR_ACK_MASK))
+ == MSS_DMA_CTRLR_ACK_READY) {
+ break;
+ }
+ udelay(50);
+ timeout--;
+ }
+ if (timeout == 0) {
+ ERROR("\nMSS DMA failed (timeout)\n");
+ return 1;
+ }
+ }
+ return 0;
+}
+
+static int mss_image_load(uint32_t src_addr, uint32_t size,
+ uintptr_t mss_regs, uintptr_t sram)
+{
+ uint32_t chunks = 1; /* !sram case */
+ uint32_t chunk_num;
+ int ret;
+
/* Check if the img size is not bigger than ID-RAM size of MSS CM3 */
if (size > MSS_IDRAM_SIZE) {
ERROR("image is too big to fit into MSS CM3 memory\n");
return 1;
}
- NOTICE("Loading MSS image from addr. 0x%x Size 0x%x to MSS at 0x%lx\n",
- src_addr, size, mss_regs);
- /* load image to MSS RAM using DMA */
- loop_num = (size / DMA_SIZE) + (((size & (DMA_SIZE - 1)) == 0) ? 0 : 1);
+ /* The CPx MSS DMA cannot access DRAM directly in secure boot mode
+ * Copy the MSS FW image to MSS SRAM by the CPU first, then run
+ * MSS DMA for SRAM to IRAM copy
+ */
+ if (sram != 0) {
+ chunks = size / MSS_SRAM_SIZE + !!(size % MSS_SRAM_SIZE);
+ }
- for (i = 0; i < loop_num; i++) {
- /* write destination and source addresses */
- mmio_write_32(MSS_DMA_SRCBR(mss_regs),
- MSS_EXTERNAL_SPACE |
- ((src_addr & MSS_EXTERNAL_ADDR_MASK) +
- (i * DMA_SIZE)));
- mmio_write_32(MSS_DMA_DSTBR(mss_regs), (i * DMA_SIZE));
+ NOTICE("%s Loading MSS FW from addr. 0x%x Size 0x%x to MSS at 0x%lx\n",
+ sram == 0 ? "" : "SECURELY", src_addr, size, mss_regs);
+ for (chunk_num = 0; chunk_num < chunks; chunk_num++) {
+ size_t chunk_size = size;
+ uint32_t img_src = MSS_EXTERNAL_SPACE | /* no SRAM */
+ (src_addr & MSS_EXTERNAL_ADDR_MASK);
- dsb(); /* make sure DMA data is ready before triggering it */
+ if (sram != 0) {
+ uintptr_t chunk_source =
+ src_addr + MSS_SRAM_SIZE * chunk_num;
- /* set the DMA control register */
- mmio_write_32(MSS_DMA_CTRLR(mss_regs), ((MSS_DMA_CTRLR_REQ_SET
- << MSS_DMA_CTRLR_REQ_OFFSET) |
- (DMA_SIZE << MSS_DMA_CTRLR_SIZE_OFFSET)));
+ if (chunk_num != (size / MSS_SRAM_SIZE)) {
+ chunk_size = MSS_SRAM_SIZE;
+ } else {
+ chunk_size = size % MSS_SRAM_SIZE;
+ }
- /* Poll DMA_ACK at MSS_DMACTLR until it is ready */
- timeout = MSS_DMA_TIMEOUT;
- while (timeout) {
- if ((mmio_read_32(MSS_DMA_CTRLR(mss_regs)) >>
- MSS_DMA_CTRLR_ACK_OFFSET & MSS_DMA_CTRLR_ACK_MASK)
- == MSS_DMA_CTRLR_ACK_READY) {
+ if (chunk_size == 0) {
break;
}
- udelay(50);
- timeout--;
+ VERBOSE("Chunk %d -> SRAM 0x%lx from 0x%lx SZ 0x%lx\n",
+ chunk_num, sram, chunk_source, chunk_size);
+ memcpy((void *)sram, (void *)chunk_source, chunk_size);
+ dsb();
+ img_src = MSS_INTERNAL_SPACE |
+ (sram & MSS_INTERNAL_ADDR_MASK);
}
- if (timeout == 0) {
- ERROR("\nDMA failed to load MSS image\n");
- return 1;
+ ret = mss_iram_dma_load(img_src, chunk_size, mss_regs);
+ if (ret != 0) {
+ ERROR("MSS FW chunk %d load failed\n", chunk_num);
+ return ret;
}
}
bl2_plat_configure_mss_windows(mss_regs);
+ /* Wipe the MSS SRAM after using it as copy buffer */
+ if (sram) {
+ memset((void *)sram, 0, MSS_SRAM_SIZE);
+ }
+
/* Release M3 from reset */
- mmio_write_32(MSS_M3_RSTCR(mss_regs), (MSS_M3_RSTCR_RST_OFF <<
- MSS_M3_RSTCR_RST_OFFSET));
+ mmio_write_32(MSS_M3_RSTCR(mss_regs),
+ (MSS_M3_RSTCR_RST_OFF << MSS_M3_RSTCR_RST_OFFSET));
NOTICE("Done\n");
@@ -162,7 +217,7 @@
VERBOSE("Send info about the SCP_BL2 image to be transferred to SCP\n");
ret = mss_image_load(single_img, image_size,
- bl2_plat_get_ap_mss_regs(ap_idx));
+ bl2_plat_get_ap_mss_regs(ap_idx), 0);
if (ret != 0) {
ERROR("SCP Image load failed\n");
return -1;
@@ -218,6 +273,8 @@
cp_index, ap_idx);
ret = mss_image_load(single_img, image_size,
bl2_plat_get_cp_mss_regs(
+ ap_idx, cp_index),
+ bl2_plat_get_cp_mss_sram(
ap_idx, cp_index));
if (ret != 0) {
ERROR("SCP Image load failed\n");
diff --git a/plat/marvell/armada/common/mss/mss_scp_bootloader.h b/plat/marvell/armada/common/mss/mss_scp_bootloader.h
index 4950d24..d65354a 100644
--- a/plat/marvell/armada/common/mss/mss_scp_bootloader.h
+++ b/plat/marvell/armada/common/mss/mss_scp_bootloader.h
@@ -10,6 +10,7 @@
int scp_bootloader_transfer(void *image, unsigned int image_size);
uintptr_t bl2_plat_get_cp_mss_regs(int ap_idx, int cp_idx);
+uintptr_t bl2_plat_get_cp_mss_sram(int ap_idx, int cp_idx);
uintptr_t bl2_plat_get_ap_mss_regs(int ap_idx);
uint32_t bl2_plat_get_cp_count(int ap_idx);
uint32_t bl2_plat_get_ap_count(void);
diff --git a/plat/marvell/octeontx/otx2/t91/t9130/board/dram_port.c b/plat/marvell/octeontx/otx2/t91/t9130/board/dram_port.c
index 0befadf..82ce07b 100644
--- a/plat/marvell/octeontx/otx2/t91/t9130/board/dram_port.c
+++ b/plat/marvell/octeontx/otx2/t91/t9130/board/dram_port.c
@@ -149,7 +149,7 @@
i2c_init((void *)MVEBU_CP0_I2C_BASE);
/* select SPD memory page 0 to access DRAM configuration */
- i2c_write(I2C_SPD_P0_ADDR, 0x0, 1, tm->spd_data.all_bytes, 1);
+ i2c_write(I2C_SPD_P0_ADDR, 0x0, 1, tm->spd_data.all_bytes, 0);
/* read data from spd */
i2c_read(I2C_SPD_ADDR, 0x0, 1, tm->spd_data.all_bytes,
diff --git a/plat/marvell/octeontx/otx2/t91/t9130/board/marvell_plat_config.c b/plat/marvell/octeontx/otx2/t91/t9130/board/marvell_plat_config.c
index 7debd65..fbacf54 100644
--- a/plat/marvell/octeontx/otx2/t91/t9130/board/marvell_plat_config.c
+++ b/plat/marvell/octeontx/otx2/t91/t9130/board/marvell_plat_config.c
@@ -46,15 +46,19 @@
*****************************************************************************
*/
struct addr_map_win io_win_memory_map[] = {
+#if (CP_COUNT > 1)
+ /* SB (MCi0) internal regs */
+ {0x00000000f4000000, 0x2000000, MCI_0_TID},
+#if (CP_COUNT > 2)
+ /* SB (MCi1) internal regs */
+ {0x00000000f6000000, 0x2000000, MCI_1_TID},
+#endif
+#endif
#ifndef IMAGE_BLE
/* SB (MCi0) PCIe0-2 on CP1 */
{0x00000000e2000000, 0x3000000, MCI_0_TID},
/* SB (MCi1) PCIe0-2 on CP2 */
{0x00000000e5000000, 0x3000000, MCI_1_TID},
- /* SB (MCi0) internal regs */
- {0x00000000f4000000, 0x2000000, MCI_0_TID},
- /* SB (MCi1) internal regs */
- {0x00000000f6000000, 0x2000000, MCI_1_TID},
/* MCI 0 indirect window */
{MVEBU_MCI_REG_BASE_REMAP(0), 0x100000, MCI_0_TID},
/* MCI 1 indirect window */