blob: c8b7ab448a0de6a7d716446674aa39ec334d5633 [file] [log] [blame]
#
# Copyright (c) 2015-2020, ARM Limited and Contributors. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
ifeq (${ARCH}, aarch64)
# On ARM standard platorms, the TSP can execute from Trusted SRAM, Trusted
# DRAM (if available) or the TZC secured area of DRAM.
# TZC secured DRAM is the default.
ARM_TSP_RAM_LOCATION ?= dram
ifeq (${ARM_TSP_RAM_LOCATION}, tsram)
ARM_TSP_RAM_LOCATION_ID = ARM_TRUSTED_SRAM_ID
else ifeq (${ARM_TSP_RAM_LOCATION}, tdram)
ARM_TSP_RAM_LOCATION_ID = ARM_TRUSTED_DRAM_ID
else ifeq (${ARM_TSP_RAM_LOCATION}, dram)
ARM_TSP_RAM_LOCATION_ID = ARM_DRAM_ID
else
$(error "Unsupported ARM_TSP_RAM_LOCATION value")
endif
# Process flags
# Process ARM_BL31_IN_DRAM flag
ARM_BL31_IN_DRAM := 0
$(eval $(call assert_boolean,ARM_BL31_IN_DRAM))
$(eval $(call add_define,ARM_BL31_IN_DRAM))
else
ARM_TSP_RAM_LOCATION_ID = ARM_TRUSTED_SRAM_ID
endif
$(eval $(call add_define,ARM_TSP_RAM_LOCATION_ID))
# For the original power-state parameter format, the State-ID can be encoded
# according to the recommended encoding or zero. This flag determines which
# State-ID encoding to be parsed.
ARM_RECOM_STATE_ID_ENC := 0
# If the PSCI_EXTENDED_STATE_ID is set, then ARM_RECOM_STATE_ID_ENC need to
# be set. Else throw a build error.
ifeq (${PSCI_EXTENDED_STATE_ID}, 1)
ifeq (${ARM_RECOM_STATE_ID_ENC}, 0)
$(error Build option ARM_RECOM_STATE_ID_ENC needs to be set if \
PSCI_EXTENDED_STATE_ID is set for ARM platforms)
endif
endif
# Process ARM_RECOM_STATE_ID_ENC flag
$(eval $(call assert_boolean,ARM_RECOM_STATE_ID_ENC))
$(eval $(call add_define,ARM_RECOM_STATE_ID_ENC))
# Process ARM_DISABLE_TRUSTED_WDOG flag
# By default, Trusted Watchdog is always enabled unless SPIN_ON_BL1_EXIT is set
ARM_DISABLE_TRUSTED_WDOG := 0
ifeq (${SPIN_ON_BL1_EXIT}, 1)
ARM_DISABLE_TRUSTED_WDOG := 1
endif
$(eval $(call assert_boolean,ARM_DISABLE_TRUSTED_WDOG))
$(eval $(call add_define,ARM_DISABLE_TRUSTED_WDOG))
# Process ARM_CONFIG_CNTACR
ARM_CONFIG_CNTACR := 1
$(eval $(call assert_boolean,ARM_CONFIG_CNTACR))
$(eval $(call add_define,ARM_CONFIG_CNTACR))
# Process ARM_BL31_IN_DRAM flag
ARM_BL31_IN_DRAM := 0
$(eval $(call assert_boolean,ARM_BL31_IN_DRAM))
$(eval $(call add_define,ARM_BL31_IN_DRAM))
# Process ARM_PLAT_MT flag
ARM_PLAT_MT := 0
$(eval $(call assert_boolean,ARM_PLAT_MT))
$(eval $(call add_define,ARM_PLAT_MT))
# Use translation tables library v2 by default
ARM_XLAT_TABLES_LIB_V1 := 0
$(eval $(call assert_boolean,ARM_XLAT_TABLES_LIB_V1))
$(eval $(call add_define,ARM_XLAT_TABLES_LIB_V1))
# Don't have the Linux kernel as a BL33 image by default
ARM_LINUX_KERNEL_AS_BL33 := 0
$(eval $(call assert_boolean,ARM_LINUX_KERNEL_AS_BL33))
$(eval $(call add_define,ARM_LINUX_KERNEL_AS_BL33))
ifeq (${ARM_LINUX_KERNEL_AS_BL33},1)
ifeq (${ARCH},aarch64)
ifneq (${RESET_TO_BL31},1)
$(error "ARM_LINUX_KERNEL_AS_BL33 is only available if RESET_TO_BL31=1.")
endif
else
ifneq (${RESET_TO_SP_MIN},1)
$(error "ARM_LINUX_KERNEL_AS_BL33 is only available if RESET_TO_SP_MIN=1.")
endif
endif
ifndef PRELOADED_BL33_BASE
$(error "PRELOADED_BL33_BASE must be set if ARM_LINUX_KERNEL_AS_BL33 is used.")
endif
ifndef ARM_PRELOADED_DTB_BASE
$(error "ARM_PRELOADED_DTB_BASE must be set if ARM_LINUX_KERNEL_AS_BL33 is used.")
endif
$(eval $(call add_define,ARM_PRELOADED_DTB_BASE))
endif
# Use an implementation of SHA-256 with a smaller memory footprint but reduced
# speed.
$(eval $(call add_define,MBEDTLS_SHA256_SMALLER))
# Add the build options to pack Trusted OS Extra1 and Trusted OS Extra2 images
# in the FIP if the platform requires.
ifneq ($(BL32_EXTRA1),)
$(eval $(call TOOL_ADD_IMG,bl32_extra1,--tos-fw-extra1))
endif
ifneq ($(BL32_EXTRA2),)
$(eval $(call TOOL_ADD_IMG,bl32_extra2,--tos-fw-extra2))
endif
# Enable PSCI_STAT_COUNT/RESIDENCY APIs on ARM platforms
ENABLE_PSCI_STAT := 1
ENABLE_PMF := 1
# On ARM platforms, separate the code and read-only data sections to allow
# mapping the former as executable and the latter as execute-never.
SEPARATE_CODE_AND_RODATA := 1
# Disable ARM Cryptocell by default
ARM_CRYPTOCELL_INTEG := 0
$(eval $(call assert_boolean,ARM_CRYPTOCELL_INTEG))
$(eval $(call add_define,ARM_CRYPTOCELL_INTEG))
# Enable PIE support for RESET_TO_BL31 case
ifeq (${RESET_TO_BL31},1)
ENABLE_PIE := 1
endif
# CryptoCell integration relies on coherent buffers for passing data from
# the AP CPU to the CryptoCell
ifeq (${ARM_CRYPTOCELL_INTEG},1)
ifeq (${USE_COHERENT_MEM},0)
$(error "ARM_CRYPTOCELL_INTEG needs USE_COHERENT_MEM to be set.")
endif
endif
ifeq (${ARCH}, aarch64)
PLAT_INCLUDES += -Iinclude/plat/arm/common/aarch64
endif
PLAT_BL_COMMON_SOURCES += plat/arm/common/${ARCH}/arm_helpers.S \
plat/arm/common/arm_common.c \
plat/arm/common/arm_console.c
ifeq (${ARM_XLAT_TABLES_LIB_V1}, 1)
PLAT_BL_COMMON_SOURCES += lib/xlat_tables/xlat_tables_common.c \
lib/xlat_tables/${ARCH}/xlat_tables.c
else
include lib/xlat_tables_v2/xlat_tables.mk
PLAT_BL_COMMON_SOURCES += ${XLAT_TABLES_LIB_SRCS}
endif
BL1_SOURCES += drivers/io/io_fip.c \
drivers/io/io_memmap.c \
drivers/io/io_storage.c \
plat/arm/common/arm_bl1_setup.c \
plat/arm/common/arm_err.c \
plat/arm/common/arm_io_storage.c
ifdef EL3_PAYLOAD_BASE
# Need the plat_arm_program_trusted_mailbox() function to release secondary CPUs from
# their holding pen
BL1_SOURCES += plat/arm/common/arm_pm.c
endif
BL2_SOURCES += drivers/delay_timer/delay_timer.c \
drivers/delay_timer/generic_delay_timer.c \
drivers/io/io_fip.c \
drivers/io/io_memmap.c \
drivers/io/io_storage.c \
plat/arm/common/arm_bl2_setup.c \
plat/arm/common/arm_err.c \
plat/arm/common/arm_io_storage.c
# Add `libfdt` and Arm common helpers required for Dynamic Config
include lib/libfdt/libfdt.mk
DYN_CFG_SOURCES += plat/arm/common/arm_dyn_cfg.c \
plat/arm/common/arm_dyn_cfg_helpers.c \
common/fdt_wrappers.c
BL1_SOURCES += ${DYN_CFG_SOURCES}
BL2_SOURCES += ${DYN_CFG_SOURCES}
ifeq (${BL2_AT_EL3},1)
BL2_SOURCES += plat/arm/common/arm_bl2_el3_setup.c
endif
# Because BL1/BL2 execute in AArch64 mode but BL32 in AArch32 we need to use
# the AArch32 descriptors.
ifeq (${JUNO_AARCH32_EL3_RUNTIME},1)
BL2_SOURCES += plat/arm/common/aarch32/arm_bl2_mem_params_desc.c
else
BL2_SOURCES += plat/arm/common/${ARCH}/arm_bl2_mem_params_desc.c
endif
BL2_SOURCES += plat/arm/common/arm_image_load.c \
common/desc_image_load.c
ifeq (${SPD},opteed)
BL2_SOURCES += lib/optee/optee_utils.c
endif
BL2U_SOURCES += drivers/delay_timer/delay_timer.c \
drivers/delay_timer/generic_delay_timer.c \
plat/arm/common/arm_bl2u_setup.c
BL31_SOURCES += plat/arm/common/arm_bl31_setup.c \
plat/arm/common/arm_pm.c \
plat/arm/common/arm_topology.c \
plat/common/plat_psci_common.c
ifeq (${ENABLE_PMF}, 1)
ifeq (${ARCH}, aarch64)
BL31_SOURCES += plat/arm/common/aarch64/execution_state_switch.c\
plat/arm/common/arm_sip_svc.c \
lib/pmf/pmf_smc.c
else
BL32_SOURCES += plat/arm/common/arm_sip_svc.c \
lib/pmf/pmf_smc.c
endif
endif
ifeq (${EL3_EXCEPTION_HANDLING},1)
BL31_SOURCES += plat/arm/common/aarch64/arm_ehf.c
endif
ifeq (${SDEI_SUPPORT},1)
BL31_SOURCES += plat/arm/common/aarch64/arm_sdei.c
endif
# RAS sources
ifeq (${RAS_EXTENSION},1)
BL31_SOURCES += lib/extensions/ras/std_err_record.c \
lib/extensions/ras/ras_common.c
endif
# Pointer Authentication sources
ifeq (${ENABLE_PAUTH}, 1)
PLAT_BL_COMMON_SOURCES += plat/arm/common/aarch64/arm_pauth.c \
lib/extensions/pauth/pauth_helpers.S
endif
ifneq (${TRUSTED_BOARD_BOOT},0)
# Include common TBB sources
AUTH_SOURCES := drivers/auth/auth_mod.c \
drivers/auth/crypto_mod.c \
drivers/auth/img_parser_mod.c \
# Include the selected chain of trust sources.
ifeq (${COT},tbbr)
AUTH_SOURCES += drivers/auth/tbbr/tbbr_cot.c
else
$(error Unknown chain of trust ${COT})
endif
BL1_SOURCES += ${AUTH_SOURCES} \
bl1/tbbr/tbbr_img_desc.c \
plat/arm/common/arm_bl1_fwu.c \
plat/common/tbbr/plat_tbbr.c
BL2_SOURCES += ${AUTH_SOURCES} \
plat/common/tbbr/plat_tbbr.c
$(eval $(call TOOL_ADD_IMG,ns_bl2u,--fwu,FWU_))
# We expect to locate the *.mk files under the directories specified below
ifeq (${ARM_CRYPTOCELL_INTEG},0)
CRYPTO_LIB_MK := drivers/auth/mbedtls/mbedtls_crypto.mk
else
CRYPTO_LIB_MK := drivers/auth/cryptocell/cryptocell_crypto.mk
endif
IMG_PARSER_LIB_MK := drivers/auth/mbedtls/mbedtls_x509.mk
$(info Including ${CRYPTO_LIB_MK})
include ${CRYPTO_LIB_MK}
$(info Including ${IMG_PARSER_LIB_MK})
include ${IMG_PARSER_LIB_MK}
endif
ifeq (${RECLAIM_INIT_CODE}, 1)
ifeq (${ARM_XLAT_TABLES_LIB_V1}, 1)
$(error "To reclaim init code xlat tables v2 must be used")
endif
endif