Installing BCC

Kernel Configuration

In general, to use these features, a Linux kernel version 4.1 or newer is required. In addition, the kernel should have been compiled with the following flags set:

CONFIG_BPF=y
CONFIG_BPF_SYSCALL=y
# [optional, for tc filters]
CONFIG_NET_CLS_BPF=m
# [optional, for tc actions]
CONFIG_NET_ACT_BPF=m
CONFIG_BPF_JIT=y
CONFIG_HAVE_BPF_JIT=y
# [optional, for kprobes]
CONFIG_BPF_EVENTS=y

There are a few optional kernel flags needed for running bcc networking examples on vanilla kernel:

CONFIG_NET_SCH_SFQ=m
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_DUMMY=m
CONFIG_VXLAN=m

Kernel compile flags can usually be checked by looking at /proc/config.gz or /boot/config-<kernel-version>.

Packages

Ubuntu - Binary

The stable and the nightly packages are built for Ubuntu Xenial (16.04) and Ubuntu Artful (17.10). The steps are very straightforward, no need to upgrade the kernel or compile from source!

Stable and Signed Packages

sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys D4284CDD
echo "deb https://repo.iovisor.org/apt/xenial xenial main" | sudo tee /etc/apt/sources.list.d/iovisor.list
sudo apt-get update
sudo apt-get install bcc-tools libbcc-examples linux-headers-$(uname -r)

(s/xenial/artful as appropriate)

Nightly Packages

echo "deb [trusted=yes] https://repo.iovisor.org/apt/xenial xenial-nightly main" | sudo tee /etc/apt/sources.list.d/iovisor.list
sudo apt-get update
sudo apt-get install bcc-tools libbcc-examples linux-headers-$(uname -r)

(s/xenial/artful as appropriate)

Fedora - Binary

Ensure that you are running a 4.2+ kernel with uname -r. If not, install a 4.2+ kernel from http://alt.fedoraproject.org/pub/alt/rawhide-kernel-nodebug, for example:

sudo dnf config-manager --add-repo=http://alt.fedoraproject.org/pub/alt/rawhide-kernel-nodebug/fedora-rawhide-kernel-nodebug.repo
sudo dnf update
# reboot

Nightly Packages

Nightly bcc binary packages for Fedora 25, 26, and 27 are hosted at https://repo.iovisor.org/yum/nightly/f{25,26,27}.

To install:

echo -e '[iovisor]\nbaseurl=https://repo.iovisor.org/yum/nightly/f27/$basearch\nenabled=1\ngpgcheck=0' | sudo tee /etc/yum.repos.d/iovisor.repo
sudo dnf install bcc-tools kernel-headers kernel-devel

Stable and Signed Packages

Stable bcc binary packages for Fedora 25, 26, and 27 are hosted at https://repo.iovisor.org/yum/main/f{25,26,27}.

echo -e '[iovisor]\nbaseurl=https://repo.iovisor.org/yum/main/f27/$basearch\nenabled=1' | sudo tee /etc/yum.repos.d/iovisor.repo
sudo dnf install bcc-tools kernel-devel-$(uname -r) kernel-headers-$(uname -r)

Arch - AUR

Upgrade the kernel to minimum 4.3.1-1 first; the CONFIG_BPF_SYSCALL=y configuration was not added until this kernel release.

Install these packages using any AUR helper such as pacaur, yaourt, cower, etc.:

bcc bcc-tools python-bcc python2-bcc

All build and install dependencies are listed in the PKGBUILD and should install automatically.

Gentoo - Portage

First of all, upgrade the kernel of your choice to a recent version. For example:

emerge sys-kernel/gentoo-sources

Then, configure the kernel enabling the features you need. Please consider the following as a starting point:

CONFIG_BPF=y
CONFIG_BPF_SYSCALL=y
CONFIG_NET_CLS_BPF=m
CONFIG_NET_ACT_BPF=m
CONFIG_BPF_JIT=y
CONFIG_BPF_EVENTS=y

Finally, you can install bcc with:

emerge dev-util/bcc

The appropriate dependencies (e.g., clang, llvm with BPF backend) will be pulled automatically.

openSUSE - Binary

For openSUSE Leap 42.2 (and later) and Tumbleweed, bcc is already included in the official repo. Just install the packages with zypper.

sudo zypper ref
sudo zypper in bcc-tools bcc-examples

Source

Debian - Source

Jessie

Repositories

The automated tests that run as part of the build process require netperf. Since netperf's license is not "certified" as an open-source license, it is in Debian's non-free repository.

/etc/apt/sources.list should include the non-free repository and look something like this:

deb http://httpredir.debian.org/debian/ jessie main non-free
deb-src http://httpredir.debian.org/debian/ jessie main non-free

deb http://security.debian.org/ jessie/updates main non-free
deb-src http://security.debian.org/ jessie/updates main non-free

# wheezy-updates, previously known as 'volatile'
deb http://ftp.us.debian.org/debian/ jessie-updates main non-free
deb-src http://ftp.us.debian.org/debian/ jessie-updates main non-free

BCC also requires kernel version 4.1 or above. Those kernels are available in the jessie-backports repository. To add the jessie-backports repository to your system create the file /etc/apt/sources.list.d/jessie-backports.list with the following contents:

deb http://httpredir.debian.org/debian jessie-backports main
deb-src http://httpredir.debian.org/debian jessie-backports main

Install Build Dependencies

Note, check for the latest linux-image-4.x version in jessie-backports before proceeding. Also, have a look at the Build-Depends: section in debian/control file.

# Before you begin
apt-get update

# Update kernel and linux-base package
apt-get -t jessie-backports install linux-base linux-image-4.9.0-0.bpo.2-amd64 linux-headers-4.9.0-0.bpo.2-amd64

# BCC build dependencies:
apt-get install debhelper cmake libllvm3.8 llvm-3.8-dev libclang-3.8-dev \
  libelf-dev bison flex libedit-dev clang-format-3.8 python python-netaddr \
  python-pyroute2 luajit libluajit-5.1-dev arping iperf netperf ethtool \
  devscripts zlib1g-dev libfl-dev

Sudo

Adding eBPF probes to the kernel and removing probes from it requires root privileges. For the build to complete successfully, you must build from an account with sudo access. (You may also build as root, but it is bad style.)

/etc/sudoers or /etc/sudoers.d/build-user should contain

build-user ALL = (ALL) NOPASSWD: ALL

or

build-user ALL = (ALL) ALL

If using the latter sudoers configuration, please keep an eye out for sudo's password prompt while the build is running.

Build

cd <preferred development directory>
git clone https://github.com/iovisor/bcc.git
cd bcc
debuild -b -uc -us

Install

cd ..
sudo dpkg -i *bcc*.deb

Ubuntu - Source

To build the toolchain from source, one needs:

  • LLVM 3.7.1 or newer, compiled with BPF support (default=on)
  • Clang, built from the same tree as LLVM
  • cmake (>=3.1), gcc (>=4.7), flex, bison
  • LuaJIT, if you want Lua support

Install build dependencies

# Trusty and older
VER=trusty
echo "deb http://llvm.org/apt/$VER/ llvm-toolchain-$VER-3.7 main
deb-src http://llvm.org/apt/$VER/ llvm-toolchain-$VER-3.7 main" | \
  sudo tee /etc/apt/sources.list.d/llvm.list
wget -O - http://llvm.org/apt/llvm-snapshot.gpg.key | sudo apt-key add -
sudo apt-get update

# All versions
sudo apt-get -y install bison build-essential cmake3 flex git libedit-dev \
  libllvm3.7 llvm-3.7-dev libclang-3.7-dev python zlib1g-dev libelf-dev

# For Lua support
sudo apt-get -y install luajit luajit-5.1-dev

Install and compile BCC

git clone https://github.com/iovisor/bcc.git
mkdir bcc/build; cd bcc/build
cmake .. -DCMAKE_INSTALL_PREFIX=/usr
make
sudo make install

Fedora - Source

Install build dependencies

sudo dnf install -y bison cmake ethtool flex git iperf libstdc++-static \
  python-netaddr python-pip gcc gcc-c++ make zlib-devel \
  elfutils-libelf-devel
sudo dnf install -y luajit luajit-devel  # for Lua support
sudo dnf install -y \
  http://repo.iovisor.org/yum/extra/mageia/cauldron/x86_64/netperf-2.7.0-1.mga6.x86_64.rpm
sudo pip install pyroute2

Install binary clang

# FC22
wget http://llvm.org/releases/3.7.1/clang+llvm-3.7.1-x86_64-fedora22.tar.xz
sudo tar xf clang+llvm-3.7.1-x86_64-fedora22.tar.xz -C /usr/local --strip 1

# FC23
wget http://llvm.org/releases/3.9.0/clang+llvm-3.9.0-x86_64-fedora23.tar.xz
sudo tar xf clang+llvm-3.9.0-x86_64-fedora23.tar.xz -C /usr/local --strip 1

# FC24 and FC25
sudo dnf install -y clang clang-devel llvm llvm-devel llvm-static ncurses-devel

Install and compile BCC

git clone https://github.com/iovisor/bcc.git
mkdir bcc/build; cd bcc/build
cmake .. -DCMAKE_INSTALL_PREFIX=/usr
make
sudo make install

openSUSE - Source

Install build dependencies

sudo zypper in bison cmake flex gcc gcc-c++ git libelf-devel libstdc++-devel \
  llvm-devel clang-devel pkg-config python-devel python-setuptools python3-devel \
  python3-setuptools
sudo zypper in luajit-devel       # for lua support in openSUSE Leap 42.2 or later
sudo zypper in lua51-luajit-devel # for lua support in openSUSE Tumbleweed

Install and compile BCC

git clone https://github.com/iovisor/bcc.git
mkdir bcc/build; cd bcc/build
cmake -DCMAKE_INSTALL_PREFIX=/usr \
      -DLUAJIT_INCLUDE_DIR=`pkg-config --variable=includedir luajit` \ # for lua support
      ..
make
sudo make install
cmake -DPYTHON_CMD=python3 .. # build python3 binding
pushd src/python/
make
sudo make install
popd

Older Instructions

Build LLVM and Clang development libs

git clone http://llvm.org/git/llvm.git
cd llvm/tools; git clone http://llvm.org/git/clang.git
cd ..; mkdir -p build/install; cd build
cmake -G "Unix Makefiles" -DLLVM_TARGETS_TO_BUILD="BPF;X86" \
  -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX=$PWD/install ..
make
make install
export PATH=$PWD/install/bin:$PATH