Remove tabs, and whitespace cleanups.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@81346 91177308-0d34-0410-b5e6-96231b3b80d8
diff --git a/lib/Lex/PPLexerChange.cpp b/lib/Lex/PPLexerChange.cpp
index 2a05ba3..41ed991 100644
--- a/lib/Lex/PPLexerChange.cpp
+++ b/lib/Lex/PPLexerChange.cpp
@@ -31,7 +31,7 @@
bool Preprocessor::isInPrimaryFile() const {
if (IsFileLexer())
return IncludeMacroStack.empty();
-
+
// If there are any stacked lexers, we're in a #include.
assert(IsFileLexer(IncludeMacroStack[0]) &&
"Top level include stack isn't our primary lexer?");
@@ -47,7 +47,7 @@
PreprocessorLexer *Preprocessor::getCurrentFileLexer() const {
if (IsFileLexer())
return CurPPLexer;
-
+
// Look for a stacked lexer.
for (unsigned i = IncludeMacroStack.size(); i != 0; --i) {
const IncludeStackInfo& ISI = IncludeMacroStack[i-1];
@@ -68,7 +68,7 @@
void Preprocessor::EnterSourceFile(FileID FID, const DirectoryLookup *CurDir) {
assert(CurTokenLexer == 0 && "Cannot #include a file inside a macro!");
++NumEnteredSourceFiles;
-
+
if (MaxIncludeStackDepth < IncludeMacroStack.size())
MaxIncludeStackDepth = IncludeMacroStack.size();
@@ -77,13 +77,13 @@
return EnterSourceFileWithPTH(PL, CurDir);
}
EnterSourceFileWithLexer(new Lexer(FID, *this), CurDir);
-}
+}
/// EnterSourceFileWithLexer - Add a source file to the top of the include stack
/// and start lexing tokens from it instead of the current buffer.
-void Preprocessor::EnterSourceFileWithLexer(Lexer *TheLexer,
+void Preprocessor::EnterSourceFileWithLexer(Lexer *TheLexer,
const DirectoryLookup *CurDir) {
-
+
// Add the current lexer to the include stack.
if (CurPPLexer || CurTokenLexer)
PushIncludeMacroStack();
@@ -91,12 +91,12 @@
CurLexer.reset(TheLexer);
CurPPLexer = TheLexer;
CurDirLookup = CurDir;
-
+
// Notify the client, if desired, that we are in a new source file.
if (Callbacks && !CurLexer->Is_PragmaLexer) {
SrcMgr::CharacteristicKind FileType =
SourceMgr.getFileCharacteristic(CurLexer->getFileLoc());
-
+
Callbacks->FileChanged(CurLexer->getFileLoc(),
PPCallbacks::EnterFile, FileType);
}
@@ -104,9 +104,9 @@
/// EnterSourceFileWithPTH - Add a source file to the top of the include stack
/// and start getting tokens from it using the PTH cache.
-void Preprocessor::EnterSourceFileWithPTH(PTHLexer *PL,
+void Preprocessor::EnterSourceFileWithPTH(PTHLexer *PL,
const DirectoryLookup *CurDir) {
-
+
if (CurPPLexer || CurTokenLexer)
PushIncludeMacroStack();
@@ -130,7 +130,7 @@
MacroArgs *Args) {
PushIncludeMacroStack();
CurDirLookup = 0;
-
+
if (NumCachedTokenLexers == 0) {
CurTokenLexer.reset(new TokenLexer(Tok, ILEnd, Args, *this));
} else {
@@ -174,18 +174,18 @@
bool Preprocessor::HandleEndOfFile(Token &Result, bool isEndOfMacro) {
assert(!CurTokenLexer &&
"Ending a file when currently in a macro!");
-
+
// See if this file had a controlling macro.
if (CurPPLexer) { // Not ending a macro, ignore it.
- if (const IdentifierInfo *ControllingMacro =
+ if (const IdentifierInfo *ControllingMacro =
CurPPLexer->MIOpt.GetControllingMacroAtEndOfFile()) {
// Okay, this has a controlling macro, remember in HeaderFileInfo.
- if (const FileEntry *FE =
+ if (const FileEntry *FE =
SourceMgr.getFileEntryForID(CurPPLexer->getFileID()))
HeaderInfo.SetFileControllingMacro(FE, ControllingMacro);
}
}
-
+
// If this is a #include'd file, pop it off the include stack and continue
// lexing the #includer file.
if (!IncludeMacroStack.empty()) {
@@ -197,7 +197,7 @@
SrcMgr::CharacteristicKind FileType =
SourceMgr.getFileCharacteristic(CurPPLexer->getSourceLocation());
Callbacks->FileChanged(CurPPLexer->getSourceLocation(),
- PPCallbacks::ExitFile, FileType);
+ PPCallbacks::ExitFile, FileType);
}
// Client should lex another token.
@@ -210,21 +210,21 @@
// actually typed, which is goodness.
if (CurLexer) {
const char *EndPos = CurLexer->BufferEnd;
- if (EndPos != CurLexer->BufferStart &&
+ if (EndPos != CurLexer->BufferStart &&
(EndPos[-1] == '\n' || EndPos[-1] == '\r')) {
--EndPos;
-
+
// Handle \n\r and \r\n:
- if (EndPos != CurLexer->BufferStart &&
+ if (EndPos != CurLexer->BufferStart &&
(EndPos[-1] == '\n' || EndPos[-1] == '\r') &&
EndPos[-1] != EndPos[0])
--EndPos;
}
-
+
Result.startToken();
CurLexer->BufferPtr = EndPos;
CurLexer->FormTokenWithChars(Result, EndPos, tok::eof);
-
+
// We're done with the #included file.
CurLexer.reset();
} else {
@@ -232,12 +232,12 @@
CurPTHLexer->getEOF(Result);
CurPTHLexer.reset();
}
-
+
CurPPLexer = 0;
// This is the end of the top-level file. If the diag::pp_macro_not_used
// diagnostic is enabled, look for macros that have not been used.
- if (getDiagnostics().getDiagnosticLevel(diag::pp_macro_not_used) !=
+ if (getDiagnostics().getDiagnosticLevel(diag::pp_macro_not_used) !=
Diagnostic::Ignored) {
for (macro_iterator I = macro_begin(), E = macro_end(); I != E; ++I)
if (!I->second->isUsed())
@@ -267,15 +267,15 @@
/// state of the top-of-stack lexer is unknown.
void Preprocessor::RemoveTopOfLexerStack() {
assert(!IncludeMacroStack.empty() && "Ran out of stack entries to load");
-
+
if (CurTokenLexer) {
// Delete or cache the now-dead macro expander.
if (NumCachedTokenLexers == TokenLexerCacheSize)
CurTokenLexer.reset();
else
TokenLexerCache[NumCachedTokenLexers++] = CurTokenLexer.take();
- }
-
+ }
+
PopIncludeMacroStack();
}
@@ -285,7 +285,7 @@
void Preprocessor::HandleMicrosoftCommentPaste(Token &Tok) {
assert(CurTokenLexer && !CurPPLexer &&
"Pasted comment can only be formed from macro");
-
+
// We handle this by scanning for the closest real lexer, switching it to
// raw mode and preprocessor mode. This will cause it to return \n as an
// explicit EOM token.
@@ -294,7 +294,7 @@
for (unsigned i = 0, e = IncludeMacroStack.size(); i != e; ++i) {
IncludeStackInfo &ISI = *(IncludeMacroStack.end()-i-1);
if (ISI.ThePPLexer == 0) continue; // Scan for a real lexer.
-
+
// Once we find a real lexer, mark it as raw mode (disabling macro
// expansions) and preprocessor mode (return EOM). We know that the lexer
// was *not* in raw mode before, because the macro that the comment came
@@ -307,12 +307,12 @@
FoundLexer->ParsingPreprocessorDirective = true;
break;
}
-
+
// Okay, we either found and switched over the lexer, or we didn't find a
// lexer. In either case, finish off the macro the comment came from, getting
// the next token.
if (!HandleEndOfTokenLexer(Tok)) Lex(Tok);
-
+
// Discarding comments as long as we don't have EOF or EOM. This 'comments
// out' the rest of the line, including any tokens that came from other macros
// that were active, as in:
@@ -321,22 +321,22 @@
// which should lex to 'a' only: 'b' and 'c' should be removed.
while (Tok.isNot(tok::eom) && Tok.isNot(tok::eof))
Lex(Tok);
-
+
// If we got an eom token, then we successfully found the end of the line.
if (Tok.is(tok::eom)) {
assert(FoundLexer && "Can't get end of line without an active lexer");
// Restore the lexer back to normal mode instead of raw mode.
FoundLexer->LexingRawMode = false;
-
+
// If the lexer was already in preprocessor mode, just return the EOM token
// to finish the preprocessor line.
if (LexerWasInPPMode) return;
-
+
// Otherwise, switch out of PP mode and return the next lexed token.
FoundLexer->ParsingPreprocessorDirective = false;
return Lex(Tok);
}
-
+
// If we got an EOF token, then we reached the end of the token stream but
// didn't find an explicit \n. This can only happen if there was no lexer
// active (an active lexer would return EOM at EOF if there was no \n in