| <6>[ 0.000000] [0: swapper: 0] [c0] Booting Linux on physical CPU 0xf00 |
| <6>[ 0.000000] [0: swapper: 0] [c0] Initializing cgroup subsys cpu |
| <6>[ 0.000000] [0: swapper: 0] [c0] Initializing cgroup subsys cpuacct |
| <5>[ 0.000000] [0: swapper: 0] [c0] Linux version 3.10.65-1045439 (dpi@SWHC3703) (gcc version 4.8 (GCC) ) #2 SMP PREEMPT Tue May 31 14:53:45 KST 2016 |
| <4>[ 0.000000] [0: swapper: 0] [c0] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d |
| <4>[ 0.000000] [0: swapper: 0] [c0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache |
| <6>[ 0.000000] [0: swapper: 0] [c0] Machine: sc8830, model: Spreadtrum SP7730G board |
| <6>[ 0.000000] [0: swapper: 0] [c0] [LCD] get_boot_panel_id: boot_panel_id = 0x 53b810 |
| <4>[ 0.000000] [0: swapper: 0] [c0] Malformed early option 'lcd_id' |
| <4>[ 0.000000] [0: swapper: 0] [c0] mem_cs_get dram_cs_num=1 |
| <4>[ 0.000000] [0: swapper: 0] [c0] mem_cs0_size_get dram_cs0_size =0x40000000 |
| <4>[ 0.000000] [0: swapper: 0] [c0] Memory policy: ECC disabled, Data cache writealloc |
| <7>[ 0.000000] [0: swapper: 0] [c0] On node 0 totalpages: 261632 |
| <7>[ 0.000000] [0: swapper: 0] [c0] free_area_init_node: node 0, pgdat c0bb2540, node_mem_map c0e6a000 |
| <7>[ 0.000000] [0: swapper: 0] [c0] Normal zone: 1520 pages used for memmap |
| <7>[ 0.000000] [0: swapper: 0] [c0] Normal zone: 0 pages reserved |
| <7>[ 0.000000] [0: swapper: 0] [c0] Normal zone: 194048 pages, LIFO batch:31 |
| <7>[ 0.000000] [0: swapper: 0] [c0] HighMem zone: 528 pages used for memmap |
| <7>[ 0.000000] [0: swapper: 0] [c0] HighMem zone: 67584 pages, LIFO batch:15 |
| <6>[ 0.000000] [0: swapper: 0] [c0] PERCPU: Embedded 9 pages/cpu @c1687000 s13504 r8192 d15168 u36864 |
| <7>[ 0.000000] [0: swapper: 0] [c0] pcpu-alloc: s13504 r8192 d15168 u36864 alloc=9*4096 |
| <7>[ 0.000000] [0: swapper: 0] [c0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 |
| <4>[ 0.000000] [0: swapper: 0] [c0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260112 |
| <5>[ 0.000000] [0: swapper: 0] [c0] Kernel command line: mem=1024M init=/init ram=1024M lcd_id=ID53b810 lcd_base=9f00d000 initrd=0x85500000,0x194b3f wfixnv=0x88240000,0x40000 wruntimenv=0x88280000,0x60000 sec_debug.reset_reason=0x1A2B3C00 hw_revision=4 muic_rustproof=0 sec_debug.level=0 androidboot.debug_level=0x4f4c console=null loglevel=0 sec_log=0xffe00@0x86b00000 androidboot.bootloader=G531HUBU0APE2 androidboot.emmc_checksum=0 mem_cs=1, mem_cs0_sz=40000000 connie=SM-G531H_OPEN_EUR_72963e3c6dc36350765f154bd73b696f cordon=3577077e4e2a9d15fa8d126b0a984067 androidboot.serialno=4200ddccd2da6300 calmode=0 fgu_init=2752,9361 |
| <6>[ 0.000000] [0: swapper: 0] [c0] sprdfb: [lcd_id_get]LCD Panel ID from uboot: 0x53b810 |
| <6>[ 0.000000] [0: swapper: 0] [c0] sprdfb: [lcd_base_get]LCD Panel Base from uboot: 0x9f00d000 |
| <4>[ 0.000000] [0: swapper: 0] [c0] get_boot_mode, uart_mode : 0 |
| <6>[ 0.000000] [0: swapper: 0] [c0] fgu cmd=2752,9361! |
| <6>[ 0.000000] [0: swapper: 0] [c0] fgu_cmd adc_data: 0xac0 0x2491! |
| <6>[ 0.000000] [0: swapper: 0] [c0] PID hash table entries: 4096 (order: 2, 16384 bytes) |
| <6>[ 0.000000] [0: swapper: 0] [c0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) |
| <6>[ 0.000000] [0: swapper: 0] [c0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) |
| <6>[ 0.000000] [0: swapper: 0] [c0] allocated 2097152 bytes of page_cgroup |
| <6>[ 0.000000] [0: swapper: 0] [c0] please try 'cgroup_disable=memory' option if you don't want memory cgroups |
| <6>[ 0.000000] [0: swapper: 0] [c0] Memory: 106MB 916MB = 1022MB total |
| <5>[ 0.000000] [0: swapper: 0] [c0] Memory: 977616k/977616k available, 70960k reserved, 270336K highmem |
| <5>[ 0.000000] [0: swapper: 0] [c0] Virtual kernel memory layout: |
| <5>[ 0.000000] [0: swapper: 0] vector : 0xffff0000 - 0xffff1000 ( 4 kB) |
| <5>[ 0.000000] [0: swapper: 0] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) |
| <5>[ 0.000000] [0: swapper: 0] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) |
| <5>[ 0.000000] [0: swapper: 0] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) |
| <5>[ 0.000000] [0: swapper: 0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) |
| <5>[ 0.000000] [0: swapper: 0] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) |
| <5>[ 0.000000] [0: swapper: 0] .text : 0xc0008000 - 0xc0ac5264 (10997 kB) |
| <5>[ 0.000000] [0: swapper: 0] .init : 0xc0ac6000 - 0xc0b384c0 ( 458 kB) |
| <5>[ 0.000000] [0: swapper: 0] .data : 0xc0b3a000 - 0xc0bb82f8 ( 505 kB) |
| <6>[ 0.000000] [0: swapper: 0] [c0] SLUB: HWalign=64, Order=0-2, MinObjects=0, CPUs=4, Nodes=1 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] Preemptible hierarchical RCU implementation. |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] NR_IRQS:554 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] ahb ctl0 00000803, ctl2 02000000 glb aon apb0 7451cd08 aon apb1 00000831 clk_en 00000003 |
| <4>[ 0.000000] [0: swapper/0: 0] [c0] sc clock module early init ok |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] chip id is 8730c001 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [0]ext_26m |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [1]ext_32k |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [2]clk_mpll |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [3]clk_dpll |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [4]clk_tdpll |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [5]clk_wpll |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [6]clk_cpll |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [7]clk_wifipll |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [8]clk_460m8 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [9]clk_300m |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [10]clk_37m5 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [11]clk_66m_d |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [12]clk_51m2_w |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [13]clk_40m_wf1 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [14]clk_312m |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [15]clk_208m |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [16]clk_104m |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [17]clk_52m |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [18]clk_384m |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [19]clk_256m |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [20]clk_192m |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [21]clk_153m6 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [22]clk_128m |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [23]clk_96m |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [24]clk_76m8 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [25]clk_64m |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [26]clk_51m2 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [27]clk_48m |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [28]clk_38m4 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [29]clk_24m |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [30]clk_12m |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [31]clk_mcu |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [32]clk_ca7_axi |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [33]clk_ca7_dbg |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [34]clk_emc |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [35]clk_pub_ahb |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [36]clk_aon_apb |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [37]clk_adi |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [38]clk_aux0 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [39]clk_aux1 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [40]clk_aux2 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [41]clk_probe |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [42]clk_pwm0 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [43]clk_pwm1 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [44]clk_pwm2 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [45]clk_pwm3 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [46]clk_thm |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [47]clk_efuse |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [48]clk_mspi |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [49]clk_i2c |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [50]clk_avs0 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [51]clk_avs1 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [52]clk_aud |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [53]clk_audif |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [54]clk_vbc |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [55]clk_ca7_dap |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [56]clk_ca7_ts |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [57]clk_fm_in |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [58]clk_fm |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [59]clk_disp_emc |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [60]clk_zip_emc |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [61]clk_gsp_emc |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [62]clk_ap_ahb |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [63]clk_ap_apb |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [64]clk_gsp |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [65]clk_dispc0 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [66]clk_dispc0_dbi |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [67]clk_dispc0_dpi |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [68]clk_dispc1 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [69]clk_dispc1_dbi |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [70]clk_dispc1_dpi |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [71]clk_nandc_ecc |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [72]clk_nandc_2x |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [73]clk_sdio0 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [74]clk_sdio1 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [75]clk_sdio2 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [76]clk_emmc |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [77]clk_gps |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [78]clk_usb_ref |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [79]clk_uart0 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [80]clk_uart1 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [81]clk_uart2 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [82]clk_uart3 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [83]clk_uart4 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [84]clk_i2c0 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [85]clk_i2c1 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [86]clk_i2c2 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [87]clk_i2c3 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [88]clk_i2c4 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [89]clk_spi0 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [90]clk_spi1 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [91]clk_spi2 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [92]clk_iis0 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [93]clk_iis1 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [94]clk_iis2 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [95]clk_iis3 |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [96]clk_zipenc |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [97]clk_zipdec |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [98]clk_gpu_axi |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [99]clk_gpu |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [100]clk_ccir_in |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [101]clk_mm |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [102]clk_mm_ahb |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [103]clk_mm_axi |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [104]clk_mm_mtx_axi |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [105]clk_mmu |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [106]clk_mm_ckg |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [107]clk_jpg |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [108]clk_vpp |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [109]clk_coda7_axi |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [110]clk_coda7_cc |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [111]clk_coda7_apb |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [112]clk_csi |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [113]clk_dcam_mipi |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [114]clk_vsp |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [115]clk_isp |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [116]clk_ccir |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [117]clk_sensor |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [118]clk_dcam |
| <4>[ 0.000000] [0: swapper/0: 0] [c0] sprd_init_timer |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms |
| <6>[ 0.000000] [0: swapper/0: 0] [c0] sci_timer_init |
| <6>[ 0.000091] [0: swapper/0: 0] [c0] Calibrating delay loop... 2603.41 BogoMIPS (lpj=13017088) |
| <6>[ 0.060424] [0: swapper/0: 0] [c0] pid_max: default: 32768 minimum: 301 |
| <6>[ 0.060607] [0: swapper/0: 0] [c0] Security Framework initialized |
| <6>[ 0.060638] [0: swapper/0: 0] [c0] SELinux: Initializing. |
| <7>[ 0.060699] [0: swapper/0: 0] [c0] SELinux: Starting in enforcing mode |
| <6>[ 0.060760] [0: swapper/0: 0] [c0] Mount-cache hash table entries: 512 |
| <6>[ 0.061676] [0: swapper/0: 0] [c0] Initializing cgroup subsys debug |
| <6>[ 0.061706] [0: swapper/0: 0] [c0] Initializing cgroup subsys memory |
| <6>[ 0.061737] [0: swapper/0: 0] [c0] Initializing cgroup subsys freezer |
| <6>[ 0.061798] [0: swapper/0: 0] [c0] CPU: Testing write buffer coherency: ok |
| <6>[ 0.061828] [0: swapper/0: 0] [c0] ftrace: allocating 26817 entries in 79 pages |
| <3>[ 0.092315] [0: swapper/0: 1] [c0] /cpus/cpu@f00 missing clock-frequency property |
| <3>[ 0.092346] [0: swapper/0: 1] [c0] /cpus/cpu@f01 missing clock-frequency property |
| <3>[ 0.092376] [0: swapper/0: 1] [c0] /cpus/cpu@f02 missing clock-frequency property |
| <3>[ 0.092376] [0: swapper/0: 1] [c0] /cpus/cpu@f03 missing clock-frequency property |
| <6>[ 0.092407] [0: swapper/0: 1] [c0] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00 |
| <6>[ 0.092529] [0: swapper/0: 1] [c0] Setting up static identity map for 0xc079e7c0 - 0xc079e818 |
| <6>[ 0.132965] [0: swapper/0: 1] [c0] ftrace: Allocated trace_printk buffers |
| <4>[ 0.174713] [1: swapper/1: 0] [c1] CPU1: Booted secondary processor |
| <6>[ 0.233489] [1: swapper/1: 0] [c1] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01 |
| <4>[ 0.255249] [2: swapper/2: 0] [c2] CPU2: Booted secondary processor |
| <6>[ 0.314056] [2: swapper/2: 0] [c2] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02 |
| <4>[ 0.335815] [3: swapper/3: 0] [c3] CPU3: Booted secondary processor |
| <6>[ 0.394622] [3: swapper/3: 0] [c3] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03 |
| <6>[ 0.394714] [0: swapper/0: 1] [c0] Brought up 4 CPUs |
| <6>[ 0.394775] [0: swapper/0: 1] [c0] SMP: Total of 4 processors activated (10433.33 BogoMIPS). |
| <6>[ 0.394805] [0: swapper/0: 1] [c0] CPU: All CPU(s) started in SVC mode. |
| <6>[ 0.399688] [0: swapper/0: 1] [c0] *** register_pm_notifier, nb->notifier_call:cpu_hotplug_pm_callback *** |
| <6>[ 0.401428] [0: swapper/0: 1] [c0] regulator-dummy: no parameters |
| <6>[ 0.401702] [0: swapper/0: 1] [c0] NET: Registered protocol family 16 |
| <6>[ 0.402618] [0: swapper/0: 1] [c0] DMA: preallocated 256 KiB pool for atomic coherent allocations |
| <3>[ 0.403442] [0: swapper/0: 1] [c0] Hwspinlock get count failed! |
| <6>[ 0.403503] [0: swapper/0: 1] [c0] early alloc hwspinlock id 0 |
| <6>[ 0.403503] [0: swapper/0: 1] [c0] early alloc hwspinlock id 1 |
| <6>[ 0.403533] [0: swapper/0: 1] [c0] early alloc hwspinlock id 2 |
| <6>[ 0.403533] [0: swapper/0: 1] [c0] early alloc hwspinlock id 3 |
| <6>[ 0.403564] [0: swapper/0: 1] [c0] early alloc hwspinlock id 4 |
| <6>[ 0.403564] [0: swapper/0: 1] [c0] early alloc hwspinlock id 8 |
| <4>[ 0.403594] [0: swapper/0: 1] [c0] sprd hwspinlock probe ok: hwspinlock name = 40060000.hwspinlock1, hwspinlock_vid = 0x100,hwspinlock_exist_cnt = 32 |
| <6>[ 0.403594] [0: swapper/0: 1] [c0] SPRD register hwspinlock1 ok,hwspinlock1's name is 40060000.hwspinlock1! |
| <4>[ 0.403625] [0: swapper/0: 1] [c0] After register,hwspinlock1 node available=0 |
| <4>[ 0.403747] [0: swapper/0: 1] [c0] sci_adi_init: sprd_adi_base=f0160000 |
| <6>[ 0.403900] [0: swapper/0: 1] [c0] sci_efuse_calibration_get() get efuse block 7, deta: 0x00008786 |
| <4>[ 0.403900] [0: swapper/0: 1] [c0] auxadc cal from efuse ok!!! |
| <4>[ 0.403930] [0: swapper/0: 1] [c0] efuse_cal_data[0]: 0xd101068, efuse_cal_data[1]:0xb380e10 |
| <4>[ 0.404632] [0: swapper/0: 1] [c0] sci get chip id = 0x0 |
| <4>[ 0.404632] [0: swapper/0: 1] [c0] ------------[ cut here ]------------ |
| <4>[ 0.404663] [0: swapper/0: 1] [c0] WARNING: at /home/dpi/qb5_8814/workspace/GRANDPRIMEVE3G_LTN_OPEN/android/kernel/mm/bootmem.c:613 alloc_bootmem_core+0x50/0xf4() |
| <4>[ 0.404754] [0: swapper/0: 1] [c0] Modules linked in: |
| <4>[ 0.404785] [0: swapper/0: 1] [c0] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.65-1045439 #2 |
| <4>[ 0.404815] [0: swapper/0: 1] [c0] [<c0016760>] (unwind_backtrace+0x0/0x100) from [<c00138c8>] (show_stack+0x20/0x24) |
| <4>[ 0.404846] [0: swapper/0: 1] [c0] [<c00138c8>] (show_stack+0x20/0x24) from [<c0796594>] (dump_stack+0x24/0x28) |
| <4>[ 0.404846] [0: swapper/0: 1] [c0] [<c0796594>] (dump_stack+0x24/0x28) from [<c001ff68>] (warn_slowpath_common+0x64/0x7c) |
| <4>[ 0.404876] [0: swapper/0: 1] [c0] [<c001ff68>] (warn_slowpath_common+0x64/0x7c) from [<c002003c>] (warn_slowpath_null+0x2c/0x34) |
| <4>[ 0.404907] [0: swapper/0: 1] [c0] [<c002003c>] (warn_slowpath_null+0x2c/0x34) from [<c0ad9b54>] (alloc_bootmem_core+0x50/0xf4) |
| <4>[ 0.404937] [0: swapper/0: 1] [c0] [<c0ad9b54>] (alloc_bootmem_core+0x50/0xf4) from [<c0ad9c28>] (___alloc_bootmem_nopanic+0x30/0x4c) |
| <4>[ 0.404968] [0: swapper/0: 1] [c0] [<c0ad9c28>] (___alloc_bootmem_nopanic+0x30/0x4c) from [<c0ada11c>] (__alloc_bootmem+0x18/0x3c) |
| <4>[ 0.404968] [0: swapper/0: 1] [c0] [<c0ada11c>] (__alloc_bootmem+0x18/0x3c) from [<c0addb74>] (sec_avc_log_init+0x30/0xa4) |
| <4>[ 0.404998] [0: swapper/0: 1] [c0] [<c0addb74>] (sec_avc_log_init+0x30/0xa4) from [<c0acc784>] (sc8830_init_machine+0xd4/0x138) |
| <4>[ 0.405029] [0: swapper/0: 1] [c0] [<c0acc784>] (sc8830_init_machine+0xd4/0x138) from [<c0ac8a2c>] (customize_machine+0x28/0x48) |
| <4>[ 0.405059] [0: swapper/0: 1] [c0] [<c0ac8a2c>] (customize_machine+0x28/0x48) from [<c0009634>] (do_one_initcall+0x128/0x17c) |
| <4>[ 0.405059] [0: swapper/0: 1] [c0] [<c0009634>] (do_one_initcall+0x128/0x17c) from [<c0ac6c50>] (kernel_init_freeable+0x148/0x1e8) |
| <4>[ 0.405090] [0: swapper/0: 1] [c0] [<c0ac6c50>] (kernel_init_freeable+0x148/0x1e8) from [<c078b4f0>] (kernel_init+0x1c/0x16c) |
| <4>[ 0.405120] [0: swapper/0: 1] [c0] [<c078b4f0>] (kernel_init+0x1c/0x16c) from [<c000f818>] (ret_from_fork+0x14/0x20) |
| <4>[ 0.405181] [0: swapper/0: 1] [c0] ---[ end trace 1b75b31a2719ed1c ]--- |
| <6>[ 0.405426] [0: swapper/0: 1] [c0] allocating 262152 bytes at eeb80000 (13887843101881401619 physical) for avc log |
| <6>[ 0.405426] [0: swapper/0: 1] [c0] sec_avc_log_init: no old log found |
| <6>[ 0.406341] [0: swapper/0: 1] [c0] eic-gpio 40210000.gpio: base_addr f00b4000, gpio base 288, ngpio 16, irq 69 |
| <6>[ 0.406585] [0: swapper/0: 1] eic-gpio 40280000.gpio: base_addr f00b6000, gpio base 0, ngpio 256, irq 67 |
| <6>[ 0.407684] [0: swapper/0: 1] eic-gpio 40038100.gpio: base_addr f0168100, gpio base 304, ngpio 16, irq 419 |
| <6>[ 0.407897] [0: swapper/0: 1] eic-gpio 40038480.gpio: base_addr f00b8480, gpio base 256, ngpio 32, irq 436 |
| <3>[ 0.409576] [0: swapper/0: 1] Hwspinlock get count failed! |
| <4>[ 0.409606] [0: swapper/0: 1] [c0] sprd hwspinlock probe ok: hwspinlock name = 20c00000.hwspinlock0, hwspinlock_vid = 0x100,hwspinlock_exist_cnt = 64 |
| <6>[ 0.412139] [0: swapper/0: 1] [c0] sipc:[0] define status=0xc05a058c, clear=0xc05a0328, trigger=0xc05a00c4 |
| <6>[ 0.412139] [0: swapper/0: 1] [c0] sipc:[1] define status=0xc05a05a8, clear=0xc05a03f4, trigger=0xc05a0190 |
| <6>[ 0.412170] [0: swapper/0: 1] [c0] sipc:[2] define status=0xc05a05c4, clear=0xc05a04c0, trigger=0xc05a025c |
| <6>[ 0.412200] [0: swapper/0: 1] [c0] sipc: chd_nr=1 smem_base=0x87800000, smem_size=0x240000 |
| <6>[ 0.412200] [0: swapper/0: 1] [c0] sipc:[0] name=sipc-w |
| <6>[ 0.412231] [0: swapper/0: 1] [c0] sipc:[0] dst=2 |
| <6>[ 0.412231] [0: swapper/0: 1] [c0] sipc:[0] ap2cp_int_ctrl=0xf0058000, ap2cp_ctrl_phy=0x402c0000, cp2ap_int_ctrl=0xf0058004, cp2ap_ctrl_phy=0x402c0004 |
| <6>[ 0.412261] [0: swapper/0: 1] [c0] sipc:[0] ap2cp_bit_trig=0x1, ap2cp_bit_clr=0x1 |
| <6>[ 0.412292] [0: swapper/0: 1] [c0] sipc:[0] cp_base=0x88000000, cp_size=0x1c00000 |
| <6>[ 0.412292] [0: swapper/0: 1] [c0] sipc:[0] smem_base=0x87800000, smem_size=0x180000 |
| <6>[ 0.412322] [0: swapper/0: 1] [c0] sipc:[0] ring_base=0x89bff000, ring_size=0x1000 |
| <6>[ 0.412353] [0: swapper/0: 1] [c0] sipc:[0] irq=100 |
| <6>[ 0.412384] [0: swapper/0: 1] [c0] sipc: num=1 |
| <6>[ 0.412384] [0: swapper/0: 1] [c0] sipc: [0] fn status=0xc05a058c, clear=0xc05a0328, trigger=0xc05a00c4 |
| <6>[ 0.412414] [0: swapper/0: 1] [c0] sipc:[0] smsg name=sipc-w, dst=2, irq=100 |
| <6>[ 0.412414] [0: swapper/0: 1] [c0] sipc:[0] after ioremap vbase=0xf00ba000, pbase=0x89bff000, size=0x1000 |
| <6>[ 0.412475] [0: swapper/0: 1] [c0] sipc:[0] created |
| <6>[ 0.412475] [0: swapper/0: 1] [c0] sipc: smem_base=0x87800000, smem_size=0x240000 |
| <6>[ 0.428192] [0: swapper/0: 1] [c0] bio: create slab <bio-0> at 0 |
| <6>[ 0.428680] [0: swapper/0: 1] [c0] sm5701:SM5701_i2c_init |
| <6>[ 0.428894] [0: swapper/0: 1] [c0] sc272x ana chipid:(0x2723a090), ana_mixed_ctl:(0x00000300), otp_sel:(0x00000000) |
| <6>[ 0.428924] [0: swapper/0: 1] [c0] sci_regulator_probe remap iram phy addr(0x50005000) to vir addr (0xf00d0000) ok! |
| <6>[ 0.428955] [0: swapper/0: 1] [c0] regu: @@@sci_regulator_register_dt: regulators desc list 0xee946010, count 28, sci_regulator_desc size 184 |
| <6>[ 0.428985] [0: swapper/0: 1] [c0] regu: @@@sci_regulator_parse_dt: [1] vddcore type 2, range 600000(uV) - 3125000(uV), step 3125(uV), default 900000(uV) - (on) |
| <6>[ 0.429107] [0: swapper/0: 1] [c0] vddcore: 600 <--> 3125 mV at 900 mV normal standby |
| <6>[ 0.429229] [0: swapper/0: 1] [c0] regu: @@@__init_trimming: emmeory block(0) data 0x4e |
| <6>[ 0.429290] [0: swapper/0: 1] [c0] regu: @@@set_regu_offset: vddcore otp delta: -18, voltage offset: 0(uV) |
| <6>[ 0.429351] [0: swapper/0: 1] [c0] regu: @@@sci_regulator_parse_dt: [2] vddarm type 2, range 600000(uV) - 3125000(uV), step 3125(uV), default 900000(uV) - (on) |
| <6>[ 0.429443] [0: swapper/0: 1] [c0] vddarm: 600 <--> 3125 mV at 1050 mV normal standby |
| <6>[ 0.429534] [0: swapper/0: 1] [c0] regu: @@@__init_trimming: emmeory block(0) data 0x4e |
| <6>[ 0.429656] [0: swapper/0: 1] [c0] regu: @@@set_regu_offset: vddarm otp delta: -17, voltage offset: 0(uV) |
| <6>[ 0.429687] [0: swapper/0: 1] [c0] regu: @@@sci_regulator_parse_dt: [3] vddmem type 2, range 600000(uV) - 3125000(uV), step 3125(uV), default 1200000(uV) - (off) |
| <6>[ 0.429779] [0: swapper/0: 1] [c0] vddmem: 600 <--> 3125 mV at 1200 mV normal standby |
| <6>[ 0.429870] [0: swapper/0: 1] [c0] regu: @@@__init_trimming: emmeory block(0) data 0x4e |
| <6>[ 0.429962] [0: swapper/0: 1] [c0] regu: @@@set_regu_offset: vddmem otp delta: -24, voltage offset: 0(uV) |
| <6>[ 0.430023] [0: swapper/0: 1] [c0] regu: @@@sci_regulator_parse_dt: [4] vddgen type 2, range 600000(uV) - 3125000(uV), step 3125(uV), default 2400000(uV) - (on) |
| <6>[ 0.430114] [0: swapper/0: 1] [c0] vddgen: 600 <--> 3125 mV at 2100 mV normal standby |
| <6>[ 0.430206] [0: swapper/0: 1] [c0] regu: @@@__init_trimming: emmeory block(0) data 0x4e |
| <6>[ 0.430297] [0: swapper/0: 1] [c0] regu: @@@set_regu_offset: vddgen otp delta: -46, voltage offset: 0(uV) |
| <6>[ 0.430328] [0: swapper/0: 1] [c0] regu: @@@sci_regulator_parse_dt: [5] vddrf type 2, range 600000(uV) - 3125000(uV), step 3125(uV), default 1500000(uV) - (on) |
| <6>[ 0.430419] [0: swapper/0: 1] [c0] vddrf: 600 <--> 3125 mV at 1800 mV normal standby |
| <6>[ 0.430511] [0: swapper/0: 1] [c0] regu: @@@__init_trimming: emmeory block(0) data 0x4e |
| <6>[ 0.430603] [0: swapper/0: 1] [c0] regu: @@@set_regu_offset: vddrf otp delta: -28, voltage offset: 0(uV) |
| <6>[ 0.430633] [0: swapper/0: 1] [c0] regu: @@@sci_regulator_parse_dt: [6] vddwpa type 2, range 3125000(uV) - 3400000(uV), step 3125(uV), default 0(uV) - (off) |
| <6>[ 0.430725] [0: swapper/0: 1] [c0] vddwpa: 3125 <--> 3400 mV at 3125 mV normal standby |
| <6>[ 0.430816] [0: swapper/0: 1] [c0] regu: @@@__init_trimming: emmeory block(0) data 0x4e |
| <6>[ 0.430847] [0: swapper/0: 1] [c0] regu: @@@set_regu_offset: vddwpa otp delta: 0, voltage offset: 0(uV) |
| <6>[ 0.430877] [0: swapper/0: 1] [c0] regu: @@@sci_regulator_parse_dt: [7] vddcon type 2, range 600000(uV) - 3125000(uV), step 3125(uV), default 1600000(uV) - (off) |
| <6>[ 0.430999] [0: swapper/0: 1] [c0] vddcon: 600 <--> 3125 mV at 1600 mV normal standby |
| <6>[ 0.431091] [0: swapper/0: 1] [c0] regu: @@@__init_trimming: emmeory block(0) data 0x4e |
| <6>[ 0.431152] [0: swapper/0: 1] [c0] regu: @@@set_regu_offset: vddcon otp delta: -64, voltage offset: 0(uV) |
| <6>[ 0.431182] [0: swapper/0: 1] [c0] regu: @@@sci_regulator_parse_dt: [8] vddrf0 type 0, range 1150000(uV) - 2750000(uV), step 6250(uV), default 1800000(uV) - (on) |
| <6>[ 0.431274] [0: swapper/0: 1] [c0] vddrf0: 1150 <--> 2750 mV at 1800 mV normal standby |
| <6>[ 0.431365] [0: swapper/0: 1] [c0] regu: @@@__init_trimming: emmeory block(0) data 0x4e |
| <6>[ 0.431427] [0: swapper/0: 1] [c0] regu: @@@set_regu_offset: vddrf0 otp delta: -4, voltage offset: 0(uV) |
| <6>[ 0.431488] [0: swapper/0: 1] [c0] regu: @@@sci_regulator_parse_dt: [9] vddemmccore type 0, range 1200000(uV) - 3760000(uV), step 10000(uV), default 3000000(uV) - (on) |
| <6>[ 0.431579] [0: swapper/0: 1] [c0] vddemmccore: 1200 <--> 3760 mV at 3000 mV normal standby |
| <6>[ 0.431671] [0: swapper/0: 1] [c0] regu: @@@__init_trimming: emmeory block(0) data 0x4e |
| <6>[ 0.431701] [0: swapper/0: 1] [c0] regu: @@@set_regu_offset: vddemmccore otp delta: -6, voltage offset: 0(uV) |
| <6>[ 0.431762] [0: swapper/0: 1] [c0] regu: @@@sci_regulator_parse_dt: [10] vddgen1 type 0, range 1150000(uV) - 1950000(uV), step 6250(uV), default 1800000(uV) - (on) |
| <6>[ 0.431854] [0: swapper/0: 1] [c0] vddgen1: 1150 <--> 1950 mV at 1800 mV normal standby |
| <6>[ 0.431915] [0: swapper/0: 1] [c0] regu: @@@__init_trimming: emmeory block(0) data 0x4e |
| <6>[ 0.431976] [0: swapper/0: 1] [c0] regu: @@@set_regu_offset: vddgen1 otp delta: -4, voltage offset: 0(uV) |
| <6>[ 0.432037] [0: swapper/0: 1] [c0] regu: @@@sci_regulator_parse_dt: [11] vddgen0 type 0, range 1150000(uV) - 1950000(uV), step 6250(uV), default 1800000(uV) - (on) |
| <6>[ 0.432128] [0: swapper/0: 1] [c0] vddgen0: 1150 <--> 1950 mV at 1800 mV normal standby |
| <6>[ 0.432189] [0: swapper/0: 1] [c0] regu: @@@__init_trimming: emmeory block(0) data 0x4e |
| <6>[ 0.432250] [0: swapper/0: 1] [c0] regu: @@@set_regu_offset: vddgen0 otp delta: -4, voltage offset: 0(uV) |
| <6>[ 0.432312] [0: swapper/0: 1] [c0] regu: @@@sci_regulator_parse_dt: [12] vdddcxo type 0, range 1200000(uV) - 3760000(uV), step 10000(uV), default 1800000(uV) - (on) |
| <6>[ 0.432373] [0: swapper/0: 1] [c0] vdddcxo: 1200 <--> 3760 mV at 1800 mV normal standby |
| <6>[ 0.432464] [0: swapper/0: 1] [c0] regu: @@@__init_trimming: emmeory block(0) data 0x4e |
| <6>[ 0.432556] [0: swapper/0: 1] [c0] regu: @@@set_regu_offset: vdddcxo otp delta: -3, voltage offset: 0(uV) |
| <6>[ 0.432586] [0: swapper/0: 1] [c0] regu: @@@sci_regulator_parse_dt: [13] vdd25 type 0, range 1200000(uV) - 3760000(uV), step 10000(uV), default 2800000(uV) - (off) |
| <6>[ 0.432678] [0: swapper/0: 1] [c0] vdd25: 1200 <--> 3760 mV at 2800 mV normal standby |
| <6>[ 0.432769] [0: swapper/0: 1] [c0] regu: @@@__init_trimming: emmeory block(0) data 0x4e |
| <6>[ 0.432830] [0: swapper/0: 1] [c0] regu: @@@set_regu_offset: vdd25 otp delta: -4, voltage offset: 0(uV) |
| <6>[ 0.432891] [0: swapper/0: 1] [c0] regu: @@@sci_regulator_parse_dt: [14] vdd28 type 0, range 1200000(uV) - 3760000(uV), step 10000(uV), default 2800000(uV) - (on) |
| <6>[ 0.432983] [0: swapper/0: 1] [c0] vdd28: 1200 <--> 3760 mV at 2800 mV normal standby |
| <6>[ 0.433074] [0: swapper/0: 1] [c0] regu: @@@__init_trimming: emmeory block(0) data 0x4e |
| <6>[ 0.433135] [0: swapper/0: 1] [c0] regu: @@@set_regu_offset: vdd28 otp delta: -12, voltage offset: 0(uV) |
| <6>[ 0.433166] [0: swapper/0: 1] [c0] regu: @@@sci_regulator_parse_dt: [15] vdd18 type 0, range 1150000(uV) - 1950000(uV), step 6250(uV), default 1800000(uV) - (on) |
| <6>[ 0.433258] [0: swapper/0: 1] [c0] vdd18: 1150 <--> 1950 mV at 1800 mV normal standby |
| <6>[ 0.433349] [0: swapper/0: 1] [c0] regu: @@@__init_trimming: emmeory block(0) data 0x4e |
| <6>[ 0.433380] [0: swapper/0: 1] [c0] regu: @@@set_regu_offset: vdd18 otp delta: -5, voltage offset: 0(uV) |
| <6>[ 0.433441] [0: swapper/0: 1] [c0] regu: @@@sci_regulator_parse_dt: [16] vddwifipa type 0, range 1200000(uV) - 3760000(uV), step 10000(uV), default 3300000(uV) - (off) |
| <6>[ 0.433502] [0: swapper/0: 1] [c0] vddwifipa: 1200 <--> 3760 mV at 3300 mV normal standby |
| <6>[ 0.433624] [0: swapper/0: 1] [c0] regu: @@@__init_trimming: emmeory block(0) data 0x4e |
| <6>[ 0.433685] [0: swapper/0: 1] [c0] regu: @@@set_regu_offset: vddwifipa otp delta: -7, voltage offset: 0(uV) |
| <6>[ 0.433746] [0: swapper/0: 1] [c0] regu: @@@sci_regulator_parse_dt: [17] vddsdcore type 0, range 1200000(uV) - 3760000(uV), step 10000(uV), default 3000000(uV) - (off) |
| <6>[ 0.433807] [0: swapper/0: 1] [c0] vddsdcore: 1200 <--> 3760 mV at 3000 mV normal standby |
| <6>[ 0.433929] [0: swapper/0: 1] [c0] regu: @@@__init_trimming: emmeory block(0) data 0x4e |
| <6>[ 0.433990] [0: swapper/0: 1] [c0] regu: @@@set_regu_offset: vddsdcore otp delta: -7, voltage offset: 0(uV) |
| <6>[ 0.434051] [0: swapper/0: 1] [c0] regu: @@@sci_regulator_parse_dt: [18] vddsdio type 0, range 1200000(uV) - 3760000(uV), step 10000(uV), default 3000000(uV) - (off) |
| <6>[ 0.434112] [0: swapper/0: 1] [c0] vddsdio: 1200 <--> 3760 mV at 3300 mV normal standby |
| <6>[ 0.434204] [0: swapper/0: 1] [c0] regu: @@@__init_trimming: emmeory block(0) data 0x4e |
| <6>[ 0.434295] [0: swapper/0: 1] [c0] regu: @@@set_regu_offset: vddsdio otp delta: 4, voltage offset: 0(uV) |
| <6>[ 0.434326] [0: swapper/0: 1] [c0] regu: @@@sci_regulator_parse_dt: [19] vddsim0 type 0, range 1200000(uV) - 3760000(uV), step 10000(uV), default 1800000(uV) - (off) |
| <6>[ 0.434417] [0: swapper/0: 1] [c0] vddsim0: 1200 <--> 3760 mV at 1800 mV normal standby |
| <6>[ 0.434509] [0: swapper/0: 1] [c0] regu: @@@__init_trimming: emmeory block(0) data 0x4e |
| <6>[ 0.434600] [0: swapper/0: 1] [c0] regu: @@@set_regu_offset: vddsim0 otp delta: -4, voltage offset: 0(uV) |
| <6>[ 0.434631] [0: swapper/0: 1] [c0] regu: @@@sci_regulator_parse_dt: [20] vddsim1 type 0, range 1200000(uV) - 3760000(uV), step 10000(uV), default 1800000(uV) - (off) |
| <6>[ 0.434722] [0: swapper/0: 1] [c0] vddsim1: 1200 <--> 3760 mV at 1800 mV normal standby |
| <6>[ 0.434814] [0: swapper/0: 1] [c0] regu: @@@__init_trimming: emmeory block(0) data 0x4e |
| <6>[ 0.434875] [0: swapper/0: 1] [c0] regu: @@@set_regu_offset: vddsim1 otp delta: -4, voltage offset: 0(uV) |
| <6>[ 0.434936] [0: swapper/0: 1] [c0] regu: @@@sci_regulator_parse_dt: [21] vddsim2 type 0, range 1200000(uV) - 3760000(uV), step 10000(uV), default 1800000(uV) - (off) |
| <6>[ 0.435089] [0: swapper/0: 1] [c0] vddsim2: 1200 <--> 3760 mV at 1800 mV normal standby |
| <6>[ 0.435180] [0: swapper/0: 1] [c0] regu: @@@__init_trimming: emmeory block(0) data 0x4e |
| <6>[ 0.435272] [0: swapper/0: 1] [c0] regu: @@@set_regu_offset: vddsim2 otp delta: -4, voltage offset: 0(uV) |
| <6>[ 0.435302] [0: swapper/0: 1] [c0] regu: @@@sci_regulator_parse_dt: [22] vddcama type 0, range 1200000(uV) - 3760000(uV), step 10000(uV), default 2800000(uV) - (off) |
| <6>[ 0.435394] [0: swapper/0: 1] [c0] vddcama: 1200 <--> 3760 mV at 2800 mV normal standby |
| <6>[ 0.435485] [0: swapper/0: 1] [c0] regu: @@@__init_trimming: emmeory block(0) data 0x4e |
| <6>[ 0.435516] [0: swapper/0: 1] [c0] regu: @@@set_regu_offset: vddcama otp delta: -7, voltage offset: 0(uV) |
| <6>[ 0.435577] [0: swapper/0: 1] [c0] regu: @@@sci_regulator_parse_dt: [23] vddcamd type 0, range 1150000(uV) - 1950000(uV), step 6250(uV), default 1500000(uV) - (off) |
| <6>[ 0.435668] [0: swapper/0: 1] [c0] vddcamd: 1150 <--> 1950 mV at 1500 mV normal standby |
| <6>[ 0.435760] [0: swapper/0: 1] [c0] regu: @@@__init_trimming: emmeory block(0) data 0x4e |
| <6>[ 0.435821] [0: swapper/0: 1] [c0] regu: @@@set_regu_offset: vddcamd otp delta: 2, voltage offset: 0(uV) |
| <6>[ 0.435913] [0: swapper/0: 1] [c0] regu: @@@sci_regulator_parse_dt: [24] vddcamio type 0, range 1150000(uV) - 1950000(uV), step 6250(uV), default 1800000(uV) - (off) |
| <6>[ 0.435974] [0: swapper/0: 1] [c0] vddcamio: 1150 <--> 1950 mV at 1800 mV normal standby |
| <6>[ 0.436065] [0: swapper/0: 1] [c0] regu: @@@__init_trimming: emmeory block(0) data 0x4e |
| <6>[ 0.436126] [0: swapper/0: 1] [c0] regu: @@@set_regu_offset: vddcamio otp delta: -5, voltage offset: 0(uV) |
| <6>[ 0.436157] [0: swapper/0: 1] [c0] regu: @@@sci_regulator_parse_dt: [25] vddcammot type 0, range 1200000(uV) - 3760000(uV), step 10000(uV), default 2800000(uV) - (off) |
| <6>[ 0.436248] [0: swapper/0: 1] [c0] vddcammot: 1200 <--> 3760 mV at 2800 mV normal standby |
| <6>[ 0.436340] [0: swapper/0: 1] [c0] regu: @@@__init_trimming: emmeory block(0) data 0x4e |
| <6>[ 0.436401] [0: swapper/0: 1] [c0] regu: @@@set_regu_offset: vddcammot otp delta: -7, voltage offset: 0(uV) |
| <6>[ 0.436431] [0: swapper/0: 1] [c0] regu: @@@sci_regulator_parse_dt: [26] vddusb type 0, range 1200000(uV) - 3760000(uV), step 10000(uV), default 3300000(uV) - (off) |
| <6>[ 0.436523] [0: swapper/0: 1] [c0] vddusb: 1200 <--> 3760 mV at 3300 mV normal standby |
| <6>[ 0.436614] [0: swapper/0: 1] [c0] regu: @@@__init_trimming: emmeory block(0) data 0x4e |
| <6>[ 0.436645] [0: swapper/0: 1] [c0] regu: @@@set_regu_offset: vddusb otp delta: 6, voltage offset: 0(uV) |
| <6>[ 0.436706] [0: swapper/0: 1] [c0] regu: @@@sci_regulator_parse_dt: [27] vddkpled type 0, range 1200000(uV) - 3760000(uV), step 10000(uV), default 3300000(uV) - (off) |
| <6>[ 0.436798] [0: swapper/0: 1] [c0] vddkpled: 1200 <--> 3760 mV at 2800 mV normal standby |
| <6>[ 0.436889] [0: swapper/0: 1] [c0] regu: @@@__init_trimming: emmeory block(0) data 0x4e |
| <6>[ 0.436950] [0: swapper/0: 1] [c0] regu: @@@set_regu_offset: vddkpled otp delta: -6, voltage offset: 0(uV) |
| <6>[ 0.436981] [0: swapper/0: 1] [c0] regu: @@@sci_regulator_parse_dt: [28] vddvibr type 0, range 1200000(uV) - 3760000(uV), step 10000(uV), default 3000000(uV) - (off) |
| <6>[ 0.437072] [0: swapper/0: 1] [c0] vddvibr: 1200 <--> 3760 mV at 3300 mV normal standby |
| <6>[ 0.437164] [0: swapper/0: 1] [c0] regu: @@@__init_trimming: emmeory block(0) data 0x4e |
| <6>[ 0.437255] [0: swapper/0: 1] [c0] regu: @@@set_regu_offset: vddvibr otp delta: -5, voltage offset: 0(uV) |
| <5>[ 0.437713] [0: swapper/0: 1] [c0] SCSI subsystem initialized |
| <6>[ 0.437896] [0: swapper/0: 1] [c0] usbcore: registered new interface driver usbfs |
| <6>[ 0.437957] [0: swapper/0: 1] [c0] usbcore: registered new interface driver hub |
| <6>[ 0.438079] [0: swapper/0: 1] [c0] usbcore: registered new device driver usb |
| <6>[ 0.438873] [0: swapper/0: 1] [c0] SM5701_i2c_probe: SM5701 MFD Probe Start !!!!! |
| <6>[ 0.438934] [0: swapper/0: 1] [c0] SM5701_parse_dt: SM5701_parse_dt irq: -2 |
| <6>[ 0.438964] [0: swapper/0: 1] [c0] SM5701_parse_dt: SM5701_parse_dt chgen: 215 |
| <6>[ 0.439117] [0: swapper/0: 1] [c0] sm5701-i2c 6-0049: SM5701 MFD probe done!!! |
| <6>[ 0.439147] [0: swapper/0: 1] [c0] i2c-gpio i2c_gpio.22: using pins 159 (SDA) and 160 (SCL) |
| <6>[ 0.439483] [0: swapper/0: 1] [c0] i2c-gpio i2c_gpio.23: using pins 150 (SDA) and 151 (SCL) |
| <6>[ 0.439636] [0: swapper/0: 1] [c0] sprd-i2c 70500000.i2c: sprd_i2c_probe() id=0, base=f00bc000 |
| <6>[ 0.439636] [0: swapper/0: 1] [c0] (null): sprd_i2c_clk_init buf=clk_i2c0 |
| <6>[ 0.440185] [0: swapper/0: 1] sprd-i2c 70600000.i2c: sprd_i2c_probe() id=1, base=f00be000 |
| <6>[ 0.440185] [0: swapper/0: 1] [c0] (null): sprd_i2c_clk_init buf=clk_i2c1 |
| <6>[ 0.440490] [0: swapper/0: 1] sprd-i2c 70700000.i2c: sprd_i2c_probe() id=2, base=f00ca000 |
| <6>[ 0.440521] [0: swapper/0: 1] [c0] (null): sprd_i2c_clk_init buf=clk_i2c2 |
| <6>[ 0.441223] [0: swapper/0: 1] sprd-i2c 70800000.i2c: sprd_i2c_probe() id=3, base=f00cc000 |
| <6>[ 0.441253] [0: swapper/0: 1] [c0] (null): sprd_i2c_clk_init buf=clk_i2c3 |
| <6>[ 0.441406] [0: swapper/0: 1] sprd-i2c 70900000.i2c: sprd_i2c_probe() id=4, base=f00ce000 |
| <6>[ 0.441436] [0: swapper/0: 1] [c0] (null): sprd_i2c_clk_init buf=clk_i2c4 |
| <6>[ 0.441772] [0: swapper/0: 1] Linux video capture interface: v2.00 |
| <6>[ 0.441802] [0: swapper/0: 1] [c0] SM5701_charger_init |
| <6>[ 0.441925] [0: swapper/0: 1] [c0] SM5701_charger_probe: SM5701 Charger Probe Start |
| <6>[ 0.441955] [0: swapper/0: 1] [c0] sec_chg_dt_init chg_irq_attr request failed: 0 |
| <4>[ 0.442413] [0: swapper/0: 1] [c0] sec_chg_dt_init: battery detect gpio 313 |
| <6>[ 0.443359] [0: swapper/0: 1] [c0] SM5701_charger_initialize: SM5701 Charger init, CHIP REV : 9 !! |
| <6>[ 0.445922] [0: swapper/0: 1] [c0] SM5701_charger_initialize : SM5701_STATUS1 : 0x24 |
| <6>[ 0.450500] [0: swapper/0: 1] [c0] SM5701_test_read |
| <6>[ 0.451416] [0: swapper/0: 1] [c0] read SM5701 addr : 0x03 data : 0x63 |
| <6>[ 0.452362] [0: swapper/0: 1] [c0] read SM5701 addr : 0x04 data : 0xec |
| <6>[ 0.453277] [0: swapper/0: 1] [c0] read SM5701 addr : 0x05 data : 0xff |
| <6>[ 0.454223] [0: swapper/0: 1] [c0] read SM5701 addr : 0x06 data : 0x24 |
| <6>[ 0.455139] [0: swapper/0: 1] [c0] read SM5701 addr : 0x07 data : 0x08 |
| <6>[ 0.456085] [0: swapper/0: 1] [c0] read SM5701 addr : 0x08 data : 0x00 |
| <6>[ 0.457031] [0: swapper/0: 1] [c0] read SM5701 addr : 0x09 data : 0xe4 |
| <6>[ 0.457946] [0: swapper/0: 1] [c0] read SM5701 addr : 0x0a data : 0x11 |
| <6>[ 0.458892] [0: swapper/0: 1] [c0] read SM5701 addr : 0x0b data : 0x04 |
| <6>[ 0.459808] [0: swapper/0: 1] [c0] read SM5701 addr : 0x0c data : 0x23 |
| <6>[ 0.460754] [0: swapper/0: 1] [c0] read SM5701 addr : 0x0d data : 0x1b |
| <6>[ 0.461669] [0: swapper/0: 1] [c0] read SM5701 addr : 0x0e data : 0x0f |
| <6>[ 0.462615] [0: swapper/0: 1] [c0] read SM5701 addr : 0x0f data : 0x0c |
| <6>[ 0.463531] [0: swapper/0: 1] [c0] read SM5701 addr : 0x10 data : 0x94 |
| <6>[ 0.464477] [0: swapper/0: 1] [c0] read SM5701 addr : 0x11 data : 0x15 |
| <6>[ 0.465423] [0: swapper/0: 1] [c0] read SM5701 addr : 0x12 data : 0x13 |
| <6>[ 0.466339] [0: swapper/0: 1] [c0] read SM5701 addr : 0x13 data : 0x08 |
| <6>[ 0.467254] [0: swapper/0: 1] [c0] read SM5701 addr : 0x14 data : 0x05 |
| <6>[ 0.468322] [0: swapper/0: 1] [c0] SM5701_get_charging_status : SM5701_STATUS2 : 0x08 |
| <6>[ 0.472930] [0: swapper/0: 1] [c0] SM5701_get_charging_health : Health, SM5701_STATUS1 : 0x24 |
| <6>[ 0.473876] [0: swapper/0: 1] [c0] SM5701_get_battery_present: SM5701_STATUS1 (0x24) |
| <3>[ 0.473907] [0: swapper/0: 1] [c0] power_supply sec-charger: driver failed to report `charge_otg_control' property: -22 |
| <6>[ 0.474121] [3:irq/322-charger: 55] [c3] *** SM5701_irq_thread *** |
| <6>[ 0.474182] [1: swapper/0: 1] [c1] SM5701_charger_probe: SM5701 Charger Probe Loaded |
| <3>[ 0.474243] [3: kworker/3:0: 25] [c3] SM5701_isr_work: Fail to get psy (battery) |
| <4>[ 0.474456] [1: swapper/0: 1] [c1] ******* leds_sm5701_init ******* |
| <4>[ 0.474578] [1: swapper/0: 1] [c1] ******* leds_sm5701_probe ******* |
| <6>[ 0.474731] [1: swapper/0: 1] [c1] sm5701_set_imled imled_ma = 19 |
| <6>[ 0.475036] [0: kworker/0:0: 4] [c0] SM5701_get_charging_status : SM5701_STATUS2 : 0x08 |
| <6>[ 0.478485] [1: swapper/0: 1] [c1] write SM5701 addr : 0x12 data : 0x13 |
| <6>[ 0.478515] [1: swapper/0: 1] [c1] sm5701_set_ifled ifled_ma = 21 |
| <6>[ 0.482147] [3: kworker/3:0: 25] [c3] SM5701_get_charging_health : Health, SM5701_STATUS1 : 0x24 |
| <3>[ 0.482177] [3: kworker/3:0: 25] [c3] SM5701_isr_work: Interrupted but Good |
| <3>[ 0.482177] [3: kworker/3:0: 25] [c3] SM5701_isr_work: Fail to set psy (battery) |
| <6>[ 0.483734] [1: swapper/0: 1] [c1] write SM5701 addr : 0x11 data : 0x15 |
| <6>[ 0.483764] [1: swapper/0: 1] [c1] sm5701_set_enabstmr abstmr_enable = 0 |
| <6>[ 0.486511] [0: kworker/0:0: 4] [c0] SM5701_get_charging_health : Health, SM5701_STATUS1 : 0x24 |
| <6>[ 0.488372] [0: kworker/0:0: 4] [c0] SM5701_get_battery_present: SM5701_STATUS1 (0x24) |
| <3>[ 0.488403] [0: kworker/0:0: 4] [c0] power_supply sec-charger: driver failed to report `charge_otg_control' property: -22 |
| <6>[ 0.489044] [1: swapper/0: 1] [c1] write SM5701 addr : 0x0f data : 0x0c |
| <6>[ 0.489044] [1: swapper/0: 1] [c1] leds_sm5701 leds_sm5701: LEDs_SM5701 Probe Done |
| <6>[ 0.489257] [1: swapper/0: 1] [c1] dma irq number is 82! |
| <6>[ 0.489532] [1: swapper/0: 1] [c1] power off sc8830_power_off, restart sc8830_machine_restart |
| <6>[ 0.489562] [1: swapper/0: 1] [c1] chip id is 8730c001 |
| <6>[ 0.489593] [1: swapper/0: 1] [c1] chip id is 8730c001 |
| <4>[ 0.489624] [1: swapper/0: 1] [c1] SAVED_VECTOR_SIZE 0x40 |
| <4>[ 0.489654] [1: swapper/0: 1] [c1] test_memory ee40a200 ae40a200 |
| <4>[ 0.489837] [0: pm_print: 57] [c0] ###---- REG_PMU_APB_SLEEP_CTRL : 0x0000000c |
| <4>[ 0.489868] [0: pm_print: 57] [c0] ###---- REG_AP_AHB_AHB_EB : 0x00002803 |
| <4>[ 0.489868] [0: pm_print: 57] [c0] ###---- REG_AP_AHB_AP_SYS_AUTO_SLEEP_CFG : 0x0000003b |
| <4>[ 0.489898] [0: pm_print: 57] [c0] ###---- REG_AP_APB_APB_EB : 0x007c4000 |
| <4>[ 0.489898] [0: pm_print: 57] [c0] ###---- REG_AON_APB_APB_EB0 : 0x7e71dd08 |
| <4>[ 0.489929] [0: pm_print: 57] [c0] ###---- REG_AON_APB_APB_EB1 : 0x00004e31 |
| <6>[ 0.489929] [1: swapper/0: 1] [c1] sc_cpuidle_init, enter, drv->state_count:3 |
| <6>[ 0.489959] [1: swapper/0: 1] [c1] sc_cpuidle_register_device, cpu:0 |
| <4>[ 0.489959] [0: pm_print: 57] [c0] ###---- REG_PMU_APB_CP_SLP_STATUS_DBG0 : 0x00003230 |
| <4>[ 0.489959] [0: pm_print: 57] [c0] ###---- REG_PMU_APB_CP_SLP_STATUS_DBG1 : 0x00000000 |
| <6>[ 0.489990] [1: swapper/0: 1] [c1] sc_cpuidle_register_device, cpu:1 |
| <6>[ 0.489990] [3: kworker/3:0: 25] [c3] SM5701_otg_over_current_status : Charging status 2(0x08) |
| <6>[ 0.490020] [1: swapper/0: 1] [c1] sc_cpuidle_register_device, cpu:2 |
| <6>[ 0.490020] [1: swapper/0: 1] [c1] sc_cpuidle_register_device, cpu:3 |
| <4>[ 0.490051] [0: pm_print: 57] [c0] ###---- REG_PMU_APB_PWR_STATUS0_DBG : 0x00000000 |
| <6>[ 0.490051] [1: swapper/0: 1] [c1] *** register_pm_notifier, nb->notifier_call:sc_cpuidle_pm_notify *** |
| <4>[ 0.490081] [0: pm_print: 57] [c0] ###---- REG_PMU_APB_PWR_STATUS1_DBG : 0x00000000 |
| <4>[ 0.490112] [0: pm_print: 57] [c0] ###---- REG_PMU_APB_PWR_STATUS2_DBG : 0x07777777 |
| <4>[ 0.490112] [0: pm_print: 57] [c0] ###---- REG_PMU_APB_PWR_STATUS3_DBG : 0x00000007 |
| <4>[ 0.490112] [0: pm_print: 57] [c0] ###---- REG_PMU_APB_SLEEP_STATUS : 0x00000055 |
| <6>[ 0.490142] [1: swapper/0: 1] [c1] [SENSORS CORE] sensors_class_init |
| <4>[ 0.490142] [0: pm_print: 57] [c0] ###---- REG_AON_APB_MPLL_CFG : 0x00000000 |
| <4>[ 0.490173] [0: pm_print: 57] [c0] ###---- REG_AON_APB_DPLL_CFG : 0x00000000 |
| <4>[ 0.490173] [0: pm_print: 57] [c0] ###---- REG_AON_CLK_EMC_CFG : 0x00000003 |
| <4>[ 0.490203] [0: pm_print: 57] [c0] ###---- ANA_REG_GLB_LDO_PD_CTRL : 0x0000edff |
| <4>[ 0.490203] [0: pm_print: 57] [c0] ###---- REG_AON_APB_MPLL_CFG1 : 0x00000432 |
| <4>[ 0.490234] [0: pm_print: 57] [c0] ###---- REG_AON_APB_DPLL_CFG1 : 0x00000429 |
| <4>[ 0.490234] [0: pm_print: 57] [c0] ###---- REG_PMU_APB_DDR_SLEEP_CTRL : 0x00000070 |
| <4>[ 0.490264] [0: pm_print: 57] [c0] ###---- BIT_GPU_EB still set ----### |
| <4>[ 0.490264] [0: pm_print: 57] [c0] ###---- BIT_MM_EB still set ----### |
| <4>[ 0.490295] [0: pm_print: 57] [c0] ###---- BIT_CA7_DAP_EB still set ----### |
| <4>[ 0.490295] [0: pm_print: 57] [c0] ###---- BIT_DISPC0_EB still set ----### |
| <4>[ 0.490325] [0: pm_print: 57] [c0] ###---- BIT_EMMC_EB still set ----### |
| <4>[ 0.490325] [0: pm_print: 57] [c0] ###---- BIT_DISP_EMC_EB set ----### |
| <4>[ 0.490325] [0: pm_print: 57] [c0] ---------- A-die power status ----------- |
| <6>[ 0.490356] [0: pm_print: 57] [c0] active wake lock pm_message_wakelock |
| <6>[ 0.490356] [0: pm_print: 57] [c0] active wake lock main |
| <6>[ 0.490386] [0: pm_print: 57] [c0] active wake lock sipc-smsg, time left 42 |
| <6>[ 0.490447] [1: swapper/0: 1] [c1] input: meta_event as /devices/virtual/input/input0 |
| <6>[ 0.490509] [1: swapper/0: 1] [c1] Advanced Linux Sound Architecture Driver Initialized. |
| <6>[ 0.490936] [3: kworker/3:0: 25] [c3] SM5701_get_battery_present: SM5701_STATUS1 (0x24) |
| <6>[ 0.490966] [3: kworker/3:0: 25] [c3] SM5701_isr_work: battery status : 1 |
| <6>[ 0.490997] [1: swapper/0: 1] [c1] Bluetooth: Core ver 2.16 |
| <6>[ 0.491027] [1: swapper/0: 1] [c1] NET: Registered protocol family 31 |
| <6>[ 0.491058] [1: swapper/0: 1] [c1] Bluetooth: HCI device and connection manager initialized |
| <6>[ 0.491088] [1: swapper/0: 1] [c1] Bluetooth: HCI socket layer initialized |
| <6>[ 0.491088] [1: swapper/0: 1] [c1] Bluetooth: L2CAP socket layer initialized |
| <6>[ 0.491119] [1: swapper/0: 1] [c1] Bluetooth: SCO socket layer initialized |
| <6>[ 0.491424] [1: kworker/1:0: 15] [c1] cfg80211: Calling CRDA to update world regulatory domain |
| <6>[ 0.491546] [1: swapper/0: 1] [c1] *** register_pm_notifier, nb->notifier_call:activity_stats_notifier *** |
| <6>[ 0.491699] [1: swapper/0: 1] [c1] sprd spi 70a00000.spi: probe spi 0 get regbase 0xf00da000 |
| <6>[ 0.491699] [1: swapper/0: 1] [c1] sprd spi 70a00000.spi: probe spi 0 get irq num 39 |
| <3>[ 0.491729] [1: swapper/0: 1] [c1] sprd spi 70a00000.spi: spi_0 rx do not have dma function,ret =-22 |
| <3>[ 0.491760] [1: swapper/0: 1] [c1] sprd spi 70a00000.spi: spi_0 tx do not have dma function,ret =-22 |
| <6>[ 0.491912] [1: swapper/0: 1] [c1] sprd spi 70a00000.spi: master is unqueued, this is deprecated |
| <6>[ 0.491943] [1: swapper/0: 1] [c1] sprd spi 70b00000.spi: probe spi 1 get regbase 0xf00dc000 |
| <6>[ 0.491973] [1: swapper/0: 1] [c1] sprd spi 70b00000.spi: probe spi 1 get irq num 40 |
| <3>[ 0.491973] [1: swapper/0: 1] [c1] sprd spi 70b00000.spi: spi_1 rx do not have dma function,ret =-22 |
| <3>[ 0.492004] [1: swapper/0: 1] [c1] sprd spi 70b00000.spi: spi_1 tx do not have dma function,ret =-22 |
| <6>[ 0.492156] [1: swapper/0: 1] [c1] sprd spi 70b00000.spi: master is unqueued, this is deprecated |
| <6>[ 0.492187] [1: swapper/0: 1] [c1] sprd spi 70c00000.spi: probe spi 2 get regbase 0xf00de000 |
| <6>[ 0.492187] [1: swapper/0: 1] [c1] sprd spi 70c00000.spi: probe spi 2 get irq num 41 |
| <3>[ 0.492218] [1: swapper/0: 1] [c1] sprd spi 70c00000.spi: spi_2 rx do not have dma function,ret =-22 |
| <3>[ 0.492248] [1: swapper/0: 1] [c1] sprd spi 70c00000.spi: spi_2 tx do not have dma function,ret =-22 |
| <6>[ 0.492370] [1: swapper/0: 1] [c1] sprd spi 70c00000.spi: master is unqueued, this is deprecated |
| <6>[ 0.492736] [1: swapper/0: 1] [c1] -----SPRD_PIN_BASE:0xf00f2000----- |
| <6>[ 0.492767] [1: swapper/0: 1] [c1] pwr_domain[0]:vdd18 |
| <6>[ 0.492767] [1: swapper/0: 1] [c1] reg[0]:0x10 |
| <6>[ 0.492797] [1: swapper/0: 1] [c1] bit_offset[0]:0x0 |
| <6>[ 0.492797] [1: swapper/0: 1] [c1] bit_width[0]:0x1 |
| <6>[ 0.492828] [1: swapper/0: 1] [c1] pwr_domain[1]:vdd18 |
| <6>[ 0.492828] [1: swapper/0: 1] [c1] reg[1]:0x10 |
| <6>[ 0.492858] [1: swapper/0: 1] [c1] bit_offset[1]:0x1 |
| <6>[ 0.492858] [1: swapper/0: 1] [c1] bit_width[1]:0x1 |
| <6>[ 0.492889] [1: swapper/0: 1] [c1] pwr_domain[2]:vddsim0 |
| <6>[ 0.492889] [1: swapper/0: 1] [c1] reg[2]:0x10 |
| <6>[ 0.492919] [1: swapper/0: 1] [c1] bit_offset[2]:0x2 |
| <6>[ 0.492919] [1: swapper/0: 1] [c1] bit_width[2]:0x1 |
| <6>[ 0.492919] [1: swapper/0: 1] [c1] pwr_domain[3]:vddsim1 |
| <6>[ 0.492950] [1: swapper/0: 1] [c1] reg[3]:0x10 |
| <6>[ 0.492950] [1: swapper/0: 1] [c1] bit_offset[3]:0x3 |
| <6>[ 0.492980] [1: swapper/0: 1] [c1] bit_width[3]:0x1 |
| <6>[ 0.492980] [1: swapper/0: 1] [c1] pwr_domain[4]:vdd18 |
| <6>[ 0.493011] [1: swapper/0: 1] [c1] reg[4]:0x10 |
| <6>[ 0.493011] [1: swapper/0: 1] [c1] bit_offset[4]:0x4 |
| <6>[ 0.493041] [1: swapper/0: 1] [c1] bit_width[4]:0x1 |
| <6>[ 0.493041] [1: swapper/0: 1] [c1] pwr_domain[5]:vddsdcore |
| <6>[ 0.493072] [1: swapper/0: 1] [c1] reg[5]:0x10 |
| <6>[ 0.493072] [1: swapper/0: 1] [c1] bit_offset[5]:0x5 |
| <6>[ 0.493103] [1: swapper/0: 1] [c1] bit_width[5]:0x1 |
| <6>[ 0.493103] [1: swapper/0: 1] [c1] pwr_domain[6]:vdd18 |
| <6>[ 0.493133] [1: swapper/0: 1] [c1] reg[6]:0x10 |
| <6>[ 0.493133] [1: swapper/0: 1] [c1] bit_offset[6]:0x6 |
| <6>[ 0.493164] [1: swapper/0: 1] [c1] bit_width[6]:0x1 |
| <6>[ 0.493194] [1: swapper/0: 1] [c1] pin_regulator_notifier_register, 415, regu_name:vdd18 |
| <4>[ 0.493225] [1: swapper/0: 1] [c1] vdd18: Failed to create debugfs directory |
| <6>[ 0.493255] [1: swapper/0: 1] [c1] pin_regulator_notifier_register, 415, regu_name:vdd18 |
| <6>[ 0.493286] [1: swapper/0: 1] [c1] pin_regulator_notifier_register, 415, regu_name:vddsim0 |
| <6>[ 0.493347] [1: swapper/0: 1] [c1] pin_regulator_notifier_register, 415, regu_name:vddsim1 |
| <4>[ 0.493377] [1: swapper/0: 1] [c1] vdd18: Failed to create debugfs directory |
| <6>[ 0.493377] [1: swapper/0: 1] [c1] pin_regulator_notifier_register, 415, regu_name:vdd18 |
| <6>[ 0.493438] [1: swapper/0: 1] [c1] pin_regulator_notifier_register, 415, regu_name:vddsdcore |
| <4>[ 0.493438] [1: swapper/0: 1] [c1] vdd18: Failed to create debugfs directory |
| <6>[ 0.493469] [1: swapper/0: 1] [c1] pin_regulator_notifier_register, 415, regu_name:vdd18 |
| <6>[ 0.494323] [1: swapper/0: 1] [c1] Switching to clocksource aon_timer_timer1 |
| <6>[ 0.510223] [1: swapper/0: 1] [c1] *** register_pm_notifier, nb->notifier_call:fw_pm_notify *** |
| <6>[ 0.510803] [1: swapper/0: 1] [c1] NET: Registered protocol family 2 |
| <6>[ 0.511505] [1: swapper/0: 1] [c1] TCP established hash table entries: 8192 (order: 4, 65536 bytes) |
| <6>[ 0.511627] [1: swapper/0: 1] [c1] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) |
| <6>[ 0.511718] [1: swapper/0: 1] [c1] TCP: Hash tables configured (established 8192 bind 8192) |
| <6>[ 0.511810] [1: swapper/0: 1] [c1] TCP: reno registered |
| <6>[ 0.511840] [1: swapper/0: 1] [c1] UDP hash table entries: 512 (order: 2, 16384 bytes) |
| <6>[ 0.511901] [1: swapper/0: 1] [c1] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) |
| <6>[ 0.512176] [1: swapper/0: 1] [c1] NET: Registered protocol family 1 |
| <6>[ 0.512420] [1: swapper/0: 1] [c1] Unpacking initramfs... |
| <6>[ 0.592224] [1: swapper/0: 1] [c1] Freeing initrd memory: 1616K (c5500000 - c5694000) |
| <4>[ 0.592987] [1: swapper/0: 1] [c1] syssleep_init |
| <6>[ 0.593017] [1: swapper/0: 1] [c1] gps_bcm47520_init |
| <6>[ 0.593505] [1: swapper/0: 1] [c1] regu: @@@ldo_set_voltage: regu 0xee946cac (vddsdio) set voltage, 1800000(uV) 1800000(uV) |
| <6>[ 0.593566] [1: swapper/0: 1] [c1] regu: @@@ldo_turn_on: regu 0xee946cac (vddsdio), turn on |
| <6>[ 0.593566] [1: swapper/0: 1] [c1] gps_regulator_on: (vddsdio) main(1800000 uV) regulator turned ON!! |
| <6>[ 0.593597] [1: swapper/0: 1] [c1] regu: @@@ldo_set_voltage: regu 0xee946b3c (vddwifipa) set voltage, 3300000(uV) 3300000(uV) |
| <6>[ 0.593627] [1: swapper/0: 1] [c1] regu: @@@ldo_turn_on: regu 0xee946b3c (vddwifipa), turn on |
| <6>[ 0.593658] [1: swapper/0: 1] [c1] gps_regulator_on: (vddwifipa) tcxo(3300000 uV) regulator turned ON!! |
| <6>[ 0.593688] [1: swapper/0: 1] [c1] gps_clk_init: clk_aux0 enabled!! |
| <6>[ 0.593994] [1: swapper/0: 1] [c1] sec-thermistor sec_thermistor.25: sec_therm_probe: SEC Thermistor Driver Loading |
| <6>[ 0.594573] [1: swapper/0: 1] [c1] audit: initializing netlink socket (enabled) |
| <4>[ 0.595275] [1: swapper/0: 1] [c1] bounce pool size: 64 pages |
| <6>[ 0.598297] [1: swapper/0: 1] [c1] zpool: loaded |
| <6>[ 0.599670] [1: swapper/0: 1] [c1] Registering sdcardfs 2.1.4 |
| <6>[ 0.600250] [1: swapper/0: 1] [c1] exFAT: Core Version 1.2.15 |
| <6>[ 0.600250] [1: swapper/0: 1] [c1] exFAT: FS Version 1.2.15 |
| <6>[ 0.600891] [1: swapper/0: 1] [c1] fuse init (API version 7.22) |
| <6>[ 0.601196] [1: swapper/0: 1] [c1] msgmni has been set to 1384 |
| <7>[ 0.601257] [1: swapper/0: 1] [c1] SELinux: Registering netfilter hooks |
| <6>[ 0.602935] [1: swapper/0: 1] [c1] io scheduler noop registered |
| <6>[ 0.602966] [1: swapper/0: 1] [c1] io scheduler cfq registered (default) |
| <6>[ 0.603118] [1: swapper/0: 1] [c1] [secgpio_dvs] secgpio_dvs_probe has been created!!! |
| <6>[ 0.603271] [1: swapper/0: 1] [c1] [secgpio_dvs] secgpio_dvs_init has been initialized!!! |
| <6>[ 0.603454] [1: swapper/0: 1] [c1] ktd3102_parse_dt_gpio, get gpio(214) |
| <6>[ 0.603485] [1: swapper/0: 1] [c1] ktd3102_parse_dt_gpio, get gpio(234) |
| <6>[ 0.603485] [1: swapper/0: 1] [c1] ktd3102_backlight_probe: ctrl=214, pwm=234 |
| <6>[ 0.603607] [1: swapper/0: 1] [c1] gen_panel_backlight_set_brightness: brightness(142), tune_level(17) |
| <6>[ 0.603637] [1: swapper/0: 1] [c1] kinetic,backlight-ktd3102 ktd3102-bl.28: gen_panel_backlight resumed. |
| <6>[ 0.603790] [1: swapper/0: 1] [c1] [LCD]called sprd_panel_probe |
| <6>[ 0.603851] [1: swapper/0: 1] [c1] sprdfb-dsi-panel panel.29: [LCD] gen_panel_parse_dt_pinctrl: found pinctrl enable |
| <6>[ 0.603851] [1: swapper/0: 1] [c1] sprdfb-dsi-panel panel.29: [LCD] gen_panel_parse_dt_pinctrl: found pinctrl disable |
| <6>[ 0.603881] [1: swapper/0: 1] [c1] [LCD] lcd_ldo_en, get gpio(167) |
| <6>[ 0.603912] [1: swapper/0: 1] [c1] [LCD] lcd_rstn, get gpio(103) |
| <6>[ 0.603973] [1: swapper/0: 1] [c1] [LCD] [0] lcd_ldo_en, on, 10000usec |
| <6>[ 0.603973] [1: swapper/0: 1] [c1] [LCD] [0] lcd_rstn, off, 10usec |
| <6>[ 0.604003] [1: swapper/0: 1] [c1] [LCD] [1] lcd_ldo_en, off, 1000usec |
| <6>[ 0.604034] [1: swapper/0: 1] [c1] [LCD] found (gen-panel-s6d78a0x02-gprimeve3g-53b810-video) by id(0x53B810) |
| <6>[ 0.604095] [1: swapper/0: 1] [c1] [LCD] gen_panel_parse_dt_panel, addr[offset:0, len:1], data[offset:1, len:1] |
| <6>[ 0.604339] [1: swapper/0: 1] [c1] lcd panel: [LCD] device init done |
| <6>[ 0.604370] [1: swapper/0: 1] [c1] [LCD][gen_panel] hfp 40 |
| <6>[ 0.604370] [1: swapper/0: 1] [c1] [LCD][gen_panel] hbp 40 |
| <6>[ 0.604400] [1: swapper/0: 1] [c1] [LCD][gen_panel] hsync 28 |
| <6>[ 0.604400] [1: swapper/0: 1] [c1] [LCD][gen_panel] vfp 8 |
| <6>[ 0.604492] [1: swapper/0: 1] [c1] [LCD][gen_panel] vbp 6 |
| <6>[ 0.604492] [1: swapper/0: 1] [c1] [LCD][gen_panel] vsync 2 |
| <6>[ 0.604522] [1: swapper/0: 1] [c1] [LCD][gen_panel] work_mode 1 |
| <6>[ 0.604522] [1: swapper/0: 1] [c1] [LCD][gen_panel] video_bus_width 24 |
| <6>[ 0.604553] [1: swapper/0: 1] [c1] [LCD][gen_panel] lan_number 2 |
| <6>[ 0.604553] [1: swapper/0: 1] [c1] [LCD][gen_panel] phy_feq 455000 |
| <6>[ 0.604583] [1: swapper/0: 1] [c1] [LCD][gen_panel] h_sync_pol 0 |
| <6>[ 0.604583] [1: swapper/0: 1] [c1] [LCD][gen_panel] v_sync_pol 0 |
| <6>[ 0.604614] [1: swapper/0: 1] [c1] [LCD][gen_panel] de_pol 0 |
| <6>[ 0.604614] [1: swapper/0: 1] [c1] [LCD][gen_panel] te_pol 0 |
| <6>[ 0.604614] [1: swapper/0: 1] [c1] [LCD][gen_panel] color_mode_pol 1 |
| <6>[ 0.604644] [1: swapper/0: 1] [c1] [LCD][gen_panel] shut_down_pol 1 |
| <6>[ 0.604644] [1: swapper/0: 1] [c1] [LCD][gen_panel] width 540 |
| <6>[ 0.604675] [1: swapper/0: 1] [c1] [LCD][gen_panel] height 960 |
| <6>[ 0.604675] [1: swapper/0: 1] [c1] [LCD][gen_panel] fps 60 |
| <6>[ 0.604705] [1: swapper/0: 1] [c1] [LCD][gen_panel] type 2 |
| <6>[ 0.604705] [1: swapper/0: 1] [c1] [LCD][gen_panel] direction 0 |
| <6>[ 0.604736] [1: swapper/0: 1] [c1] [LCD][gen_panel] suspend_mode 1 |
| <6>[ 0.604736] [1: swapper/0: 1] [c1] [LCD][gen_panel] dev_id 0 |
| <6>[ 0.604766] [1: swapper/0: 1] [c1] [LCD][gen_panel] lcd_id 53b810 |
| <6>[ 0.604766] [1: swapper/0: 1] [c1] [LCD][gen_panel] name lcd_s6d78a0x02_53b810_mipi |
| <6>[ 0.604766] [1: swapper/0: 1] [c1] [LCD][gen_panel] rst_mode 1 |
| <6>[ 0.604797] [1: swapper/0: 1] [c1] [LCD] called gen_panel_set_status with status 2 |
| <6>[ 0.604827] [1: swapper/0: 1] [c1] [LCD] sprd_panel_probe success |
| <4>[ 0.604949] [1: swapper/0: 1] [c1] sprdfb: [sprdfb_probe] id = 0 |
| <4>[ 0.604980] [1: swapper/0: 1] [c1] sprdfb: set g_dispc_base_addr = -267051008 |
| <4>[ 0.605010] [1: swapper/0: 1] [c1] sprdfb: return chip id 0x8730c001 |
| <4>[ 0.605010] [1: swapper/0: 1] [c1] sprdfb: [sprdfb_panel_get], dev_id = 0 |
| <6>[ 0.605041] [1: swapper/0: 1] [c1] sprdfb: [adapt_panel_from_uboot]: LCD Panel 0x53b810 is attached! |
| <4>[ 0.605041] [1: swapper/0: 1] [c1] sprdfb: [panel_mount], dev_id = 0 |
| <4>[ 0.605072] [1: swapper/0: 1] [c1] sprdfb: set g_dsi_base_addr = 0xf0158000 |
| <6>[ 0.605072] [1: swapper/0: 1] [c1] sprdfb: [sprdfb_dsi_init]: dsi has alread initialized |
| <6>[ 0.605102] [1: swapper/0: 1] [c1] sprdfb: dsi_module_init. call only once!sprdfb: dsi irq_num_1 = 80 |
| <3>[ 0.605163] [1: swapper/0: 1] [c1] sprdfb: dsi request irq int0 OK! |
| <4>[ 0.605194] [1: swapper/0: 1] [c1] sprdfb: dsi irq_num_2 = 81 |
| <3>[ 0.605194] [1: swapper/0: 1] [c1] sprdfb: dsi request irq int1 OK! |
| <4>[ 0.605224] [1: swapper/0: 1] [c1] sprdfb: [sprdfb_panel_get] got panel |
| <6>[ 0.606231] [1: swapper/0: 1] [c1] sprdfb: got 2073600 bytes logo proc buffer at 0xee600000 |
| <4>[ 0.606262] [1: swapper/0: 1] [c1] sprdfb: sprdfb_dispc_logo_proc[2386]: lcd_base_from_uboot: 0x9f00d000, logo_src_v:0xf0200000 |
| <4>[ 0.606292] [1: swapper/0: 1] [c1] sprdfb: sprdfb_dispc_logo_proc[2387]: logo_dst_p:0xae600000,logo_dst_v:0xee600000 |
| <6>[ 0.627532] [1: swapper/0: 1] [c1] sprdfb: dpi clock is switched from 0Hz to 38400000Hz |
| <4>[ 0.627593] [1: swapper/0: 1] [c1] sprdfb: 0x402e0004 = 0x4e35 0x20d00000 = 0x2803 0x71300000 = 0x7c4000 |
| <4>[ 0.627593] [1: swapper/0: 1] [c1] sprdfb: 0x71200034 = 0x903 0x71200030 = 0x3 0x7120002c = 0x2 |
| <6>[ 0.627624] [1: swapper/0: 1] [c1] sprdfb: [sprdfb_dispc_early_init]: dispc has alread initialized |
| <6>[ 0.627624] [1: swapper/0: 1] [c1] sprdfb: dispc_module_init. call only once!sprdfb: dispc irq_num = 78 |
| <4>[ 0.627716] [1: swapper/0: 1] [c1] *** register_sc_cpuidle_notifier, nb->notifier_call:scxx30_dispc_cpuidle_notify *** |
| <4>[ 0.627746] [1: swapper/0: 1] [c1] sprdfb: setup_fb_mem--smem_start:9f00d000,len:6220800,reserved len:6221824 |
| <6>[ 0.627838] [1: swapper/0: 1] [c1] sec_getlog_supply_fbinfo: 0xdf00d000 540 960 32 0 |
| <6>[ 0.628356] [1: swapper/0: 1] [c1] 70000000.uart: ttyS0 at I/O 0x0 (irq = 34) is a SPX |
| <4>[ 0.628540] [1: swapper/0: 1] [c1] bt host wake up type is 2, clk is 48000000 |
| <6>[ 0.628570] [1: swapper/0: 1] [c1] 70100000.uart: ttyS1 at I/O 0x0 (irq = 35) is a SPX |
| <4>[ 0.628723] [1: swapper/0: 1] [c1] bt host wake up type is 2, clk is 26000000 |
| <6>[ 0.628784] [1: swapper/0: 1] [c1] 70200000.uart: ttyS2 at I/O 0x0 (irq = 36) is a SPX |
| <4>[ 0.628906] [1: swapper/0: 1] [c1] bt host wake up type is 2, clk is 26000000 |
| <6>[ 0.628967] [1: swapper/0: 1] [c1] 70300000.uart: ttyS3 at I/O 0x0 (irq = 37) is a SPX |
| <4>[ 0.629089] [1: swapper/0: 1] [c1] bt host wake up type is 2, clk is 26000000 |
| <6>[ 0.629272] [1: swapper/0: 1] [c1] iommu_init, begin |
| <6>[ 0.629364] [1: swapper/0: 1] [c1] sprd_iommu_probe, begin |
| <6>[ 0.629364] [1: swapper/0: 1] [c1] sprd_iommu_probe, function name is sprd_iommu_gsp |
| <6>[ 0.629394] [1: swapper/0: 1] [c1] sprd_iommu_get_resource,name:sprd_iommu_gsp |
| <6>[ 0.629425] [1: swapper/0: 1] [c1] sprd_iommu_get_resource,iova_base:0x10000000,iova_size:2000000 |
| <6>[ 0.629425] [1: swapper/0: 1] [c1] sprd_iommu_get_resource,pgt_base phy:0x21400000 |
| <6>[ 0.629455] [1: swapper/0: 1] [c1] sprd_iommu_get_resource,pgt_base:f0180000,pgt_size:8000 |
| <6>[ 0.629486] [1: swapper/0: 1] [c1] sprd_iommu_get_resource,ctrl_reg phy:0x21408000 |
| <6>[ 0.629486] [1: swapper/0: 1] [c1] sprd_iommu_get_resource,ctrl_reg:0xf0190000 |
| <6>[ 0.629516] [1: swapper/0: 1] [c1] sprd_iommu_get_resource, can't get reserved fault page addr from dts |
| <6>[ 0.629516] [1: swapper/0: 1] [c1] sprd_iommu_get_resource, succeed to get reserved fault page, phy:0xae59f000 |
| <6>[ 0.629547] [1: swapper/0: 1] [c1] sprd_iommu_get_resource, can't get reserved rr page addr |
| <6>[ 0.629547] [1: swapper/0: 1] [c1] sprd_iommu_get_resource, can't get iommu-rev |
| <6>[ 0.629669] [1: swapper/0: 1] [c1] sprd_iommu_init, sprd_iommu_gsp, id:0, iova_base:0x10000000, size:0x2000000 |
| <6>[ 0.629669] [1: swapper/0: 1] [c1] pgt_base:0xf0180000,size:0x8000, fault_page:0xae59f000, rr_page:0x0 |
| <6>[ 0.629699] [1: swapper/0: 1] [c1] fault_page va: ee59f000 |
| <6>[ 0.629913] [1: swapper/0: 1] sprd_iommu_probe, name:sprd_iommu_gsp, dev->pgt:0xee5d8000, dev->pool:0xee59e600 mmu_clock:0xef01e000 |
| <6>[ 0.629943] [1: swapper/0: 1] [c1] sprd_iommu_probe, end |
| <6>[ 0.629974] [1: swapper/0: 1] [c1] sprd_iommu_probe, begin |
| <6>[ 0.629974] [1: swapper/0: 1] [c1] sprd_iommu_probe, function name is sprd_iommu_mm |
| <6>[ 0.630004] [1: swapper/0: 1] [c1] sprd_iommu_get_resource,name:sprd_iommu_mm |
| <6>[ 0.630004] [1: swapper/0: 1] [c1] sprd_iommu_get_resource,iova_base:0x20000000,iova_size:8000000 |
| <6>[ 0.630035] [1: swapper/0: 1] [c1] sprd_iommu_get_resource,pgt_base phy:0x60f00000 |
| <6>[ 0.630065] [1: swapper/0: 1] [c1] sprd_iommu_get_resource,pgt_base:f01c0000,pgt_size:20000 |
| <6>[ 0.630065] [1: swapper/0: 1] [c1] sprd_iommu_get_resource,ctrl_reg phy:0x60f20000 |
| <6>[ 0.630096] [1: swapper/0: 1] [c1] sprd_iommu_get_resource,ctrl_reg:0xf0174000 |
| <6>[ 0.630096] [1: swapper/0: 1] [c1] sprd_iommu_get_resource, can't get reserved fault page addr from dts |
| <6>[ 0.630126] [1: swapper/0: 1] [c1] sprd_iommu_get_resource, succeed to get reserved fault page, phy:0xae5a0000 |
| <6>[ 0.630126] [1: swapper/0: 1] [c1] sprd_iommu_get_resource, can't get reserved rr page addr |
| <6>[ 0.630157] [1: swapper/0: 1] [c1] sprd_iommu_get_resource, can't get iommu-rev |
| <6>[ 0.630249] [1: swapper/0: 1] [c1] sprd_iommu_mm_init, can't get mm axi clock:fffffffe |
| <6>[ 0.630249] [1: swapper/0: 1] [c1] sprd_iommu_mm_clk_enable |
| <6>[ 0.630279] [1: swapper/0: 1] [c1] sprd_iommu_init, sprd_iommu_mm, id:1, iova_base:0x20000000, size:0x8000000 |
| <6>[ 0.630310] [1: swapper/0: 1] [c1] pgt_base:0xf01c0000,size:0x20000, fault_page:0xae5a0000, rr_page:0x0 |
| <6>[ 0.630310] [1: swapper/0: 1] [c1] fault_page va: ee5a0000 |
| <6>[ 0.634490] [1: swapper/0: 1] sprd_iommu_mm_clk_disable |
| <6>[ 0.634918] [1: swapper/0: 1] [c1] sprd_iommu_probe, name:sprd_iommu_mm, dev->pgt:0xee5e0000, dev->pool:0xee59ecc0 mmu_clock:0xef025480 |
| <6>[ 0.634918] [1: swapper/0: 1] [c1] sprd_iommu_probe, end |
| <6>[ 0.635009] [1: swapper/0: 1] [c1] iommu_init, end |
| <6>[ 0.637634] [1: swapper/0: 1] [c1] loop: module loaded |
| <6>[ 0.637786] [1: swapper/0: 1] [c1] otp register sprd_efuse_otp as miscdevice 59, block 16X32bits |
| <6>[ 0.637878] [1: swapper/0: 1] [c1] otp register sprd_adie_efuse_otp as miscdevice 58, block 32X8bits |
| <6>[ 0.637878] [1: swapper/0: 1] [c1] vsp_init called ! |
| <6>[ 0.638000] [1: swapper/0: 1] [c1] vsp_probe called ! |
| <6>[ 0.638000] [1: swapper/0: 1] [c1] vsp_parse_dt called ! |
| <6>[ 0.638031] [1: swapper/0: 1] [c1] sprd_vsp_phys = 60900000 |
| <6>[ 0.638061] [1: swapper/0: 1] [c1] sprd_vsp_base = f01a0000 |
| <6>[ 0.638061] [1: swapper/0: 1] [c1] vsp_glb_reg_base = f01a1000 |
| <6>[ 0.638122] [1: swapper/0: 1] [c1] vsp: irq = 0x4b, version = 0x2 |
| <6>[ 0.638122] [1: swapper/0: 1] [c1] vsp: clock-parent-info [3, 4] |
| <6>[ 0.638153] [1: swapper/0: 1] [c1] vsp: clock_name_map[256000000] = (-985656640, €PïLÀ@Pï) |
| <6>[ 0.638183] [1: swapper/0: 1] [c1] vsp: clock_name_map[192000000] = (-985656464, €PïLÀ@Pï) |
| <6>[ 0.638214] [1: swapper/0: 1] [c1] vsp: clock_name_map[128000000] = (-985656112, €PïLÀ@Pï) |
| <6>[ 0.638244] [1: swapper/0: 1] [c1] vsp: clock_name_map[76800000] = (-985655768, €PïLÀ@Pï) |
| <6>[ 0.638397] [1: swapper/0: 1] [c1] jpg_init called ! |
| <6>[ 0.638702] [1: swapper/0: 1] [c1] sprd_cproc mem size: 64 |
| <6>[ 0.638732] [1: swapper/0: 1] [c1] sprd_cproc: base 0x88000000 |
| <6>[ 0.638732] [1: swapper/0: 1] [c1] sprd_cproc: base 0x50000000 |
| <6>[ 0.638763] [1: swapper/0: 1] [c1] sprd_cproc: base 0x402b0000 |
| <6>[ 0.638793] [1: swapper/0: 1] [c1] sprd_cproc: base 0x402b0000 |
| <6>[ 0.638793] [1: swapper/0: 1] [c1] sprd_cproc: base 0x402b0000 |
| <6>[ 0.638824] [1: swapper/0: 1] [c1] sprd_cproc: base 0x402b0000 |
| <6>[ 0.638824] [1: swapper/0: 1] [c1] sprd_cproc before p2v: ctrl_reg[0] = 0x44 |
| <6>[ 0.638854] [1: swapper/0: 1] [c1] sprd_cproc: ctrl_reg[0] = 0xf0080044 |
| <6>[ 0.638854] [1: swapper/0: 1] [c1] sprd_cproc before p2v: ctrl_reg[1] = 0x44 |
| <6>[ 0.638885] [1: swapper/0: 1] [c1] sprd_cproc: ctrl_reg[1] = 0xf0080044 |
| <6>[ 0.638885] [1: swapper/0: 1] [c1] sprd_cproc before p2v: ctrl_reg[2] = 0xb0 |
| <6>[ 0.638916] [1: swapper/0: 1] [c1] sprd_cproc: ctrl_reg[2] = 0xf00800b0 |
| <6>[ 0.638916] [1: swapper/0: 1] [c1] sprd_cproc before p2v: ctrl_reg[3] = 0xff |
| <6>[ 0.638946] [1: swapper/0: 1] [c1] sprd_cproc: ctrl_mask[0] = 0x02000000 |
| <6>[ 0.638946] [1: swapper/0: 1] [c1] sprd_cproc: ctrl_mask[1] = 0x10000000 |
| <6>[ 0.638977] [1: swapper/0: 1] [c1] sprd_cproc: ctrl_mask[2] = 0x00000001 |
| <6>[ 0.638977] [1: swapper/0: 1] [c1] sprd_cproc: ctrl_mask[3] = 0x000f0000 |
| <6>[ 0.639007] [1: swapper/0: 1] [c1] sprd_cproc: iram-data[0] = 0xe59f0000 |
| <6>[ 0.639007] [1: swapper/0: 1] [c1] sprd_cproc: iram-data[1] = 0xe12fff10 |
| <6>[ 0.639038] [1: swapper/0: 1] [c1] sprd_cproc: iram-data[2] = 0x88300000 |
| <6>[ 0.639038] [1: swapper/0: 1] [c1] sprd_cproc: cp base = 0x88000000, size = 0x1c00000 |
| <6>[ 0.639068] [1: swapper/0: 1] [c1] sprd_cproc: iram_addr=0x50000000 |
| <6>[ 0.639099] [1: swapper/0: 1] [c1] sprd_cproc: wdt irq 116 |
| <6>[ 0.639099] [1: swapper/0: 1] [c1] sprd_cproc: child node [0] name=modem |
| <6>[ 0.639129] [1: swapper/0: 1] [c1] sprd_cproc: child node [0] base=0x88300000, size=0x800000 |
| <6>[ 0.639129] [1: swapper/0: 1] [c1] sprd_cproc: child node [1] name=dsp |
| <6>[ 0.639160] [1: swapper/0: 1] [c1] sprd_cproc: child node [1] base=0x88020000, size=0x220000 |
| <6>[ 0.639190] [1: swapper/0: 1] [c1] sprd_cproc: stop callback 0xc0319f6c, start callback 0xc031a104 |
| <6>[ 0.639190] [1: swapper/0: 1] [c1] sprd_cproc: pdata=0xee007b00, of_node=0xc167f088 |
| <6>[ 0.639221] [1: swapper/0: 1] [c1] sprd_cproc_probe 88000000 1c00000 |
| <6>[ 0.639343] [1: swapper/0: 1] [c1] cproc cpw probed! |
| <6>[ 0.639373] [1: swapper/0: 1] [c1] deint_init called ! |
| <6>[ 0.639434] [1: swapper/0: 1] [c1] deint_probe called ! |
| <6>[ 0.639495] [1: swapper/0: 1] [c1] deint_parse_dt , SPRD_VPP_PHYS = 61000000, SPRD_VPP_BASE = f0178000, irq = 0x4b |
| <4>[ 0.639678] [1: swapper/0: 1] [c1] [DEBUG][CNM_VPU_DRV][F:vpu_init-L:1226]vpu_init, REG_AON_APB_BOND_OPT0 = 0x0 |
| <4>[ 0.639739] [1: swapper/0: 1] [c1] [INFO ][CNM_VPU_DRV][F:vpu_probe-L:1069][VPUDRV] vpu_probe |
| <6>[ 0.639770] [1: swapper/0: 1] [c1] vpu_parse_dt , irq = 75, SPRD_VPP_PHYS = 62100000, SPRD_VPP_BASE = f01e8000 |
| <4>[ 0.639953] [1: swapper/0: 1] [c1] [INFO ][CNM_VPU_DRV][F:vpu_probe-L:1133][VPUDRV] success to probe vpu device with non reserved video memory |
| <4>[ 0.640045] [1: swapper/0: 1] [c1] [DEBUG][CNM_VPU_DRV][F:vpu_init-L:1242]end vpu_init result=0x0 |
| <6>[ 0.640594] [1: swapper/0: 1] [c1] sprd_download_init |
| <4>[ 0.640686] [1: swapper/0: 1] [c1] sprd_power_ctl_init |
| <6>[ 0.641204] [1: swapper/0: 1] [c1] tun: Universal TUN/TAP device driver, 1.6 |
| <6>[ 0.641235] [1: swapper/0: 1] [c1] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> |
| <6>[ 0.641571] [1: swapper/0: 1] [c1] PPP generic driver version 2.4.2 |
| <6>[ 0.641693] [1: swapper/0: 1] [c1] PPP BSD Compression module registered |
| <6>[ 0.641693] [1: swapper/0: 1] [c1] PPP Deflate Compression module registered |
| <6>[ 0.641723] [1: swapper/0: 1] [c1] PPP MPPE Compression module registered |
| <6>[ 0.641723] [1: swapper/0: 1] [c1] NET: Registered protocol family 24 |
| <6>[ 0.641784] [1: swapper/0: 1] [c1] PPTP driver version 0.8.5 |
| <6>[ 0.642120] [1: swapper/0: 1] [c1] usbcore: registered new interface driver cdc_acm |
| <6>[ 0.642150] [1: swapper/0: 1] [c1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters |
| <6>[ 0.642211] [1: swapper/0: 1] [c1] usbcore: registered new interface driver usblp |
| <6>[ 0.642242] [1: swapper/0: 1] [c1] usbcore: registered new interface driver cdc_wdm |
| <6>[ 0.642303] [1: swapper/0: 1] [c1] usbcore: registered new interface driver usb-storage |
| <6>[ 0.642333] [1: swapper/0: 1] [c1] usbcore: registered new interface driver ums_eneub6250 |
| <6>[ 0.642456] [1: swapper/0: 1] [c1] usbcore: registered new interface driver usbserial |
| <6>[ 0.642486] [1: swapper/0: 1] [c1] usbcore: registered new interface driver pl2303 |
| <6>[ 0.642547] [1: swapper/0: 1] [c1] usbserial: USB Serial support registered for pl2303 |
| <6>[ 0.642700] [1: swapper/0: 1] [c1] dwc_otg: version 2.81a 04-FEB-2009 |
| <6>[ 0.642730] [1: swapper/0: 1] [c1] Working version No 007 - 10/24/2007 |
| <6>[ 0.642822] [1: swapper/0: 1] [c1] Usb_hw.c: [usb_phy_init]usb phy tune from uboot: 0x4407ae33 |
| <6>[ 0.642913] [1: swapper/0: 1] [c1] regu: @@@ldo_set_voltage: regu 0xee94726c (vddusb) set voltage, 3600000(uV) 3600000(uV) |
| <6>[ 0.643005] [1: swapper/0: 1] [c1] udc_enable |
| <6>[ 0.643035] [1: swapper/0: 1] [c1] regu: @@@ldo_set_voltage: regu 0xee94726c (vddusb) set voltage, 3300000(uV) 3300000(uV) |
| <6>[ 0.643066] [1: swapper/0: 1] [c1] regu: @@@ldo_turn_on: regu 0xee94726c (vddusb), turn on |
| <4>[ 0.864440] [1: swapper/0: 1] [c1] Core Release: 2.94a |
| <4>[ 0.864471] [1: swapper/0: 1] [c1] Setting default values for core params |
| <4>[ 0.866729] [1: swapper/0: 1] [c1] Dedicated Tx FIFOs mode |
| <6>[ 0.867187] [1: swapper/0: 1] [c1] usb_notifier: register_otg_func |
| <6>[ 0.867279] [1: swapper/0: 1] [c1] USB:shutdown udc |
| <6>[ 0.867309] [1: swapper/0: 1] [c1] udc_disable |
| <6>[ 0.867340] [1: swapper/0: 1] [c1] regu: @@@ldo_turn_off: regu 0xee94726c (vddusb), turn off |
| <6>[ 0.867492] [1: swapper/0: 1] [c1] usb_notifier: register_otg_func |
| <6>[ 0.867767] [1: swapper/0: 1] [c1] usb_notify: ovc_init |
| <6>[ 0.867797] [1: swapper/0: 1] [c1] usb_notifier: usb_notifier_init + |
| <6>[ 0.867919] [1: swapper/0: 1] [c1] usb_notifier: usb_notifier_probe + |
| <6>[ 0.867950] [1: swapper/0: 1] [c1] usb_notifier usb_notifier.5: usb_notifier_probe + |
| <6>[ 0.867950] [1: swapper/0: 1] [c1] usb_notifier: of_usb_notifier_dt+ |
| <3>[ 0.867980] [1: swapper/0: 1] [c1] usb_notifier: of_usb_notifier_dt, cannot get booster-gpio, ret=-2 |
| <6>[ 0.867980] [1: swapper/0: 1] [c1] usb_notifier: of_usb_notifier_dt- ret:0 |
| <6>[ 0.868011] [1: swapper/0: 1] [c1] usb_notify: set_otg_notify |
| <6>[ 0.868011] [1: swapper/0: 1] [c1] usb_notify: registered otg_notify + |
| <6>[ 0.868103] [1: swapper/0: 1] [c1] usb_notify: registered otg_notify - |
| <6>[ 0.868103] [1: swapper/0: 1] [c1] usb_notifier: find_and_register_boosters, booster-name=sm5701_booster |
| <6>[ 0.868133] [1: swapper/0: 1] [c1] usb_notifier usb_notifier.5: usb_notifier_probe - |
| <6>[ 0.868133] [1: swapper/0: 1] [c1] usb_notifier: usb_notifier_probe - |
| <6>[ 0.868408] [1: swapper/0: 1] [c1] sci_keypad_parse_dt: 0, 0, 115 |
| <6>[ 0.868408] [1: swapper/0: 1] [c1] sci_keypad_parse_dt: 0, 1, 172 |
| <6>[ 0.868438] [1: swapper/0: 1] [c1] sci_keypad_parse_dt: 0, 2, 115 |
| <6>[ 0.870605] [1: swapper/0: 1] [c1] input: sci-keypad as /devices/40250000.keypad/input/input1 |
| <4>[ 0.870971] [1: swapper/0: 1] [c1] sprd_eic_button_sysfs_init success |
| <6>[ 0.871124] [1: swapper/0: 1] [c1] bt541_ts 1-0020: bt541_power_control, 2 |
| <6>[ 0.895874] [1: swapper/0: 1] [c1] bt541_ts 1-0020: bt541_power_sequence: chip code = 0xe240 |
| <6>[ 0.964843] [1: swapper/0: 1] [c1] bt541_ts 1-0020: init_touch: Check checksum |
| <6>[ 0.965118] [1: swapper/0: 1] [c1] bt541_ts 1-0020: 0x55AA |
| <6>[ 0.965423] [1: swapper/0: 1] [c1] bt541_ts 1-0020: init_touch: Send reset command |
| <6>[ 0.966522] [1: swapper/0: 1] [c1] bt541_ts 1-0020: BOE pannel : touch tsp type = 1, lcd_id = 0x53b810 |
| <6>[ 0.967803] [1: swapper/0: 1] [c1] bt541_ts[init_touch : 1816] Shift value = 2 |
| <6>[ 0.968078] [1: swapper/0: 1] [c1] bt541_ts[init_touch : 1822] N count = 14 |
| <6>[ 0.968322] [1: swapper/0: 1] [c1] bt541_ts[init_touch : 1827] u count = 513 |
| <6>[ 0.968597] [1: swapper/0: 1] [c1] bt541_ts[init_touch : 1832] afe frequency = 74 |
| <6>[ 0.969360] [1: swapper/0: 1] [c1] bt541_ts 1-0020: cur version = 0x4, new version = 0x4 |
| <6>[ 0.969390] [1: swapper/0: 1] [c1] bt541_ts 1-0020: cur minor version = 0x3, new minor version = 0x3 |
| <6>[ 0.969390] [1: swapper/0: 1] [c1] bt541_ts 1-0020: cur reg data version = 0x14, new reg data version = 0x14 |
| <6>[ 0.970306] [1: swapper/0: 1] [c1] bt541_ts[init_touch : 1921] max supported finger num = 2 |
| |
| <6>[ 0.970336] [1: swapper/0: 1] [c1] bt541_ts[init_touch : 1924] set other configuration |
| |
| <4>[ 0.970916] [1: swapper/0: 1] [c1] use i2s checksum = 0 |
| |
| <6>[ 0.971099] [1: swapper/0: 1] [c1] bt541_ts 1-0020: TA setting changed to 0 |
| <6>[ 0.972839] [1: swapper/0: 1] [c1] bt541_ts 1-0020: Esd timer register = 100 |
| <6>[ 0.972839] [1: swapper/0: 1] [c1] bt541_ts[init_touch : 1978] successfully initialized |
| |
| <6>[ 0.972869] [1: swapper/0: 1] [c1] bt541_ts[bt541_ts_probe : 5221] register sec_touchscreen input device |
| |
| <6>[ 0.973022] [1: swapper/0: 1] [c1] input: sec_touchscreen as /devices/70600000.i2c/i2c-1/1-0020/input/input2 |
| <6>[ 0.973114] [1: swapper/0: 1] [c1] bt541_ts[bt541_ts_probe : 5237] request irq (irq = 314, pin = 153) |
| |
| <6>[ 0.973297] [1: swapper/0: 1] [c1] bt541_ts 1-0020: Started esd timer |
| <3>[ 0.973571] [0:irq/314-bt541_t: 87] [c0] bt541_ts 1-0020: Invalid interrupt |
| <6>[ 0.973571] [1: swapper/0: 1] [c1] bt541_ts 1-0020: zinitix touch probe. |
| |
| <6>[ 0.974273] [1: swapper/0: 1] [c1] sprd_rtc 40038080.rtc: rtc core: registered sprd_rtc as rtc0 |
| <4>[ 0.974456] [1: swapper/0: 1] [c1] After init RTC time: 2017-9-12 23:49:59 |
| <6>[ 0.974456] [1: swapper/0: 1] [c1] i2c /dev entries driver |
| <1>[ 0.975067] [1: swapper/0: 1] [c1] sprd_img_probe called |
| <1>[ 0.975158] [1: swapper/0: 1] [c1] sprd_img_probe Success |
| <6>[ 0.975402] [1: swapper/0: 1] [c1] Video Technology Magazine Virtual Video Capture Board ver 1.0.0 successfully loaded. |
| <6>[ 0.975708] [1: swapper/0: 1] [c1] rot_k_init called ! |
| <1>[ 0.975799] [1: swapper/0: 1] [c1] rot_k_probe called |
| <1>[ 0.975860] [1: swapper/0: 1] [c1] rot_k_probe Success |
| <4>[ 0.975921] [1: swapper/0: 1] [c1] gsp_drv_init enter! |
| <4>[ 0.975982] [1: swapper/0: 1] [c1] gsp_drv_probe,AHB clock :3 |
| <4>[ 0.976043] [1: swapper/0: 1] [c1] gsp: irq = 83, g_gsp_base_addr = 0xf0496000, |
| <6>[ 0.976074] [1: swapper/0: 1] [c1] gsp: get emc clk_parent ok! |
| <6>[ 0.976104] [1: swapper/0: 1] [c1] gsp: get emc clk ok! |
| <6>[ 0.976104] [1: swapper/0: 1] [c1] gsp: gsp set emc clk parent ok! |
| <6>[ 0.976135] [1: swapper/0: 1] [c1] gsp: get clk_parent ok! |
| <6>[ 0.976165] [1: swapper/0: 1] [c1] gsp: get clk ok! |
| <6>[ 0.976165] [1: swapper/0: 1] [c1] gsp: gsp set clk parent ok! |
| <6>[ 0.976348] [1: swapper/0: 1] [c1] sensor_k_init called ! |
| <1>[ 0.976409] [1: swapper/0: 1] [c1] sensor probe called |
| <4>[ 0.976562] [1: swapper/0: 1] [c1] sensor: gpio already request pwn 0 1. |
| <4>[ 0.976593] [1: swapper/0: 1] [c1] sensor: gpio already request pwn 0 2. |
| <4>[ 0.976593] [1: swapper/0: 1] [c1] sensor: gpio already request reset 0 2. |
| <4>[ 0.976623] [1: swapper/0: 1] [c1] sensor register sub device E |
| <4>[ 0.976776] [1: swapper/0: 1] [c1] sensor dev0 i2c device 0x3c sensor_main |
| <4>[ 0.976776] [1: swapper/0: 1] [c1] sensor dev1 i2c device 0x21 sensor_sub |
| <4>[ 0.976928] [1: swapper/0: 1] [c1] sensor vcm0 i2c device 0x18 sensor_i2c_vcm0 |
| <4>[ 0.977081] [1: swapper/0: 1] [c1] sensor register sub device success |
| <1>[ 0.977355] [1: swapper/0: 1] [c1] sensor prb Success |
| <4>[ 0.977386] [3: otpreload: 88] [c3] Debug L 199, /home/dpi/qb5_8814/workspace/GRANDPRIMEVE3G_LTN_OPEN/android/kernel/drivers/media/sprd_sensor/otp/sensor_otp_coreprime3g_ve.c, sensor_reloadinfo_thread: sensor_reloadinfo_thread start |
| <4>[ 0.977539] [1: swapper/0: 1] [c1] ------------[ cut here ]------------ |
| <4>[ 0.977569] [1: swapper/0: 1] [c1] WARNING: at /home/dpi/qb5_8814/workspace/GRANDPRIMEVE3G_LTN_OPEN/android/kernel/drivers/base/core.c:576 device_create_file+0x78/0xa8() |
| <4>[ 0.977600] [1: swapper/0: 1] [c1] Attribute rear_caminfo: write permission without 'store' |
| <4>[ 0.977600] [1: swapper/0: 1] [c1] Modules linked in: |
| <4>[ 0.977630] [1: swapper/0: 1] [c1] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 3.10.65-1045439 #2 |
| <4>[ 0.977661] [1: swapper/0: 1] [c1] [<c0016760>] (unwind_backtrace+0x0/0x100) from [<c00138c8>] (show_stack+0x20/0x24) |
| <4>[ 0.977691] [1: swapper/0: 1] [c1] [<c00138c8>] (show_stack+0x20/0x24) from [<c0796594>] (dump_stack+0x24/0x28) |
| <4>[ 0.977722] [1: swapper/0: 1] [c1] [<c0796594>] (dump_stack+0x24/0x28) from [<c001ff68>] (warn_slowpath_common+0x64/0x7c) |
| <4>[ 0.977722] [1: swapper/0: 1] [c1] [<c001ff68>] (warn_slowpath_common+0x64/0x7c) from [<c001ffc0>] (warn_slowpath_fmt+0x40/0x48) |
| <4>[ 0.977752] [1: swapper/0: 1] [c1] [<c001ffc0>] (warn_slowpath_fmt+0x40/0x48) from [<c02f78f4>] (device_create_file+0x78/0xa8) |
| <4>[ 0.977783] [1: swapper/0: 1] [c1] [<c02f78f4>] (device_create_file+0x78/0xa8) from [<c0af0a20>] (sensor_k_init+0x140/0x334) |
| <4>[ 0.977813] [1: swapper/0: 1] [c1] [<c0af0a20>] (sensor_k_init+0x140/0x334) from [<c0009634>] (do_one_initcall+0x128/0x17c) |
| <4>[ 0.977844] [1: swapper/0: 1] [c1] [<c0009634>] (do_one_initcall+0x128/0x17c) from [<c0ac6c50>] (kernel_init_freeable+0x148/0x1e8) |
| <4>[ 0.977844] [1: swapper/0: 1] [c1] [<c0ac6c50>] (kernel_init_freeable+0x148/0x1e8) from [<c078b4f0>] (kernel_init+0x1c/0x16c) |
| <4>[ 0.977874] [1: swapper/0: 1] [c1] [<c078b4f0>] (kernel_init+0x1c/0x16c) from [<c000f818>] (ret_from_fork+0x14/0x20) |
| <4>[ 0.977905] [1: swapper/0: 1] [c1] ---[ end trace 1b75b31a2719ed1d ]--- |
| <4>[ 0.978027] [1: swapper/0: 1] [c1] ------------[ cut here ]------------ |
| <4>[ 0.978027] [1: swapper/0: 1] [c1] WARNING: at /home/dpi/qb5_8814/workspace/GRANDPRIMEVE3G_LTN_OPEN/android/kernel/drivers/base/core.c:576 device_create_file+0x78/0xa8() |
| <4>[ 0.978057] [1: swapper/0: 1] [c1] Attribute front_caminfo: write permission without 'store' |
| <4>[ 0.978057] [1: swapper/0: 1] [c1] Modules linked in: |
| <4>[ 0.978088] [1: swapper/0: 1] [c1] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 3.10.65-1045439 #2 |
| <4>[ 0.978118] [1: swapper/0: 1] [c1] [<c0016760>] (unwind_backtrace+0x0/0x100) from [<c00138c8>] (show_stack+0x20/0x24) |
| <4>[ 0.978118] [1: swapper/0: 1] [c1] [<c00138c8>] (show_stack+0x20/0x24) from [<c0796594>] (dump_stack+0x24/0x28) |
| <4>[ 0.978149] [1: swapper/0: 1] [c1] [<c0796594>] (dump_stack+0x24/0x28) from [<c001ff68>] (warn_slowpath_common+0x64/0x7c) |
| <4>[ 0.978179] [1: swapper/0: 1] [c1] [<c001ff68>] (warn_slowpath_common+0x64/0x7c) from [<c001ffc0>] (warn_slowpath_fmt+0x40/0x48) |
| <4>[ 0.978210] [1: swapper/0: 1] [c1] [<c001ffc0>] (warn_slowpath_fmt+0x40/0x48) from [<c02f78f4>] (device_create_file+0x78/0xa8) |
| <4>[ 0.978210] [1: swapper/0: 1] [c1] [<c02f78f4>] (device_create_file+0x78/0xa8) from [<c0af0b00>] (sensor_k_init+0x220/0x334) |
| <4>[ 0.978240] [1: swapper/0: 1] [c1] [<c0af0b00>] (sensor_k_init+0x220/0x334) from [<c0009634>] (do_one_initcall+0x128/0x17c) |
| <4>[ 0.978271] [1: swapper/0: 1] [c1] [<c0009634>] (do_one_initcall+0x128/0x17c) from [<c0ac6c50>] (kernel_init_freeable+0x148/0x1e8) |
| <4>[ 0.978302] [1: swapper/0: 1] [c1] [<c0ac6c50>] (kernel_init_freeable+0x148/0x1e8) from [<c078b4f0>] (kernel_init+0x1c/0x16c) |
| <4>[ 0.978302] [1: swapper/0: 1] [c1] [<c078b4f0>] (kernel_init+0x1c/0x16c) from [<c000f818>] (ret_from_fork+0x14/0x20) |
| <4>[ 0.978332] [1: swapper/0: 1] [c1] ---[ end trace 1b75b31a2719ed1e ]--- |
| <4>[ 0.978332] [1: swapper/0: 1] [c1] isp_init: success. |
| <4>[ 0.978729] [1: swapper/0: 1] [c1] isp_probe: success. |
| <6>[ 0.978790] [1: swapper/0: 1] [c1] [sec_fuelgauge_init] start !!!!! |
| <6>[ 0.978912] [1: swapper/0: 1] [c1] sec_fuelgauge_probe: SEC Fuelgauge Driver Loading |
| <6>[ 0.979003] [1: swapper/0: 1] [c1] sec_hal_fg_get_property-45,val->intval = 500 |
| <6>[ 0.979034] [1: swapper/0: 1] [c1] register sec_hal_fg_init |
| <4>[ 0.979034] [1: swapper/0: 1] [c1] sprdbat pdata: chg_bat_safety_vol:4600 |
| <4>[ 0.979064] [1: swapper/0: 1] [c1] sprdbat pdata: irq_fgu:470 |
| <4>[ 0.979064] [1: swapper/0: 1] [c1] sprdbat pdata: fgu_mode:0 |
| <4>[ 0.979095] [1: swapper/0: 1] [c1] sprdbat pdata: alm_soc:5 |
| <4>[ 0.979095] [1: swapper/0: 1] [c1] sprdbat pdata: alm_vol:3450 |
| <4>[ 0.979095] [1: swapper/0: 1] [c1] sprdbat pdata: soft_vbat_uvlo:3050 |
| <4>[ 0.979125] [1: swapper/0: 1] [c1] sprdbat pdata: soft_vbat_ovp:0 |
| <4>[ 0.979125] [1: swapper/0: 1] [c1] sprdbat pdata: rint:200 |
| <4>[ 0.979156] [1: swapper/0: 1] [c1] sprdbat pdata: cnom:2600 |
| <4>[ 0.979156] [1: swapper/0: 1] [c1] sprdbat pdata: rsense_real:203 |
| <4>[ 0.979187] [1: swapper/0: 1] [c1] sprdbat pdata: rsense_spec:200 |
| <4>[ 0.979187] [1: swapper/0: 1] [c1] sprdbat pdata: relax_current:50 |
| <4>[ 0.979217] [1: swapper/0: 1] [c1] sprdbat pdata: fgu_cal_ajust:0 |
| <4>[ 0.979217] [1: swapper/0: 1] [c1] sprdbat pdata: qmax_update_period:0 |
| <4>[ 0.979217] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab_size:21 |
| <4>[ 0.979248] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=0 x:4320,y:100 |
| <4>[ 0.979248] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=1 x:4248,y:95 |
| <4>[ 0.979278] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=2 x:4191,y:90 |
| <4>[ 0.979278] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=3 x:4138,y:85 |
| <4>[ 0.979309] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=4 x:4086,y:80 |
| <4>[ 0.979309] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=5 x:4042,y:75 |
| <4>[ 0.979339] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=6 x:3987,y:70 |
| <4>[ 0.979339] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=7 x:3956,y:65 |
| <4>[ 0.979370] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=8 x:3917,y:60 |
| <4>[ 0.979370] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=9 x:3866,y:55 |
| <4>[ 0.979400] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=10 x:3832,y:50 |
| <4>[ 0.979400] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=11 x:3810,y:45 |
| <4>[ 0.979431] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=12 x:3794,y:40 |
| <4>[ 0.979431] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=13 x:3781,y:35 |
| <4>[ 0.979461] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=14 x:3775,y:30 |
| <4>[ 0.979461] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=15 x:3767,y:25 |
| <4>[ 0.979492] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=16 x:3743,y:20 |
| <4>[ 0.979492] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=17 x:3699,y:15 |
| <4>[ 0.979492] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=18 x:3688,y:10 |
| <4>[ 0.979522] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=19 x:3590,y:5 |
| <4>[ 0.979522] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=20 x:3400,y:0 |
| <4>[ 0.979553] [1: swapper/0: 1] [c1] sprdbat pdata: cnom_temp_tab i=0 x:25,y:2600 |
| <4>[ 0.979553] [1: swapper/0: 1] [c1] sprdbat pdata: cnom_temp_tab i=1 x:10,y:2450 |
| <4>[ 0.979583] [1: swapper/0: 1] [c1] sprdbat pdata: cnom_temp_tab i=2 x:0,y:2400 |
| <4>[ 0.979583] [1: swapper/0: 1] [c1] sprdbat pdata: rint_temp_tab i=0 x:25,y:200 |
| <4>[ 0.979614] [1: swapper/0: 1] [c1] sprdbat pdata: rint_temp_tab i=1 x:10,y:600 |
| <4>[ 0.979614] [1: swapper/0: 1] [c1] sprdbat pdata: rint_temp_tab i=2 x:0,y:700 |
| <4>[ 0.979736] [1: swapper/0: 1] [c1] sci_efuse_fgu_cal_get 4.2 data data:0x110 |
| <4>[ 0.979797] [1: swapper/0: 1] [c1] sci_efuse_fgu_cal_get 3.6 data data:0x9 |
| <4>[ 0.979858] [1: swapper/0: 1] [c1] sci_efuse_fgu_cal_get 0 data data:0x100 |
| <4>[ 0.979858] [1: swapper/0: 1] [c1] sprdfgu fgu_data: 0xb43 0x9b0,0x2000,0x0! |
| <4>[ 0.979888] [1: swapper/0: 1] [c1] sprdfgu: sprdfgu_cal_from_chip |
| <4>[ 0.979888] [1: swapper/0: 1] [c1] sprdfgu: sprdfgu_data.pdata->fgu_cal_ajust = 0 |
| <4>[ 0.979919] [1: swapper/0: 1] [c1] sprdfgu: sprdfgu_cal_init fgu_nv_4200mv = 2883,fgu_nv_3600mv = 2480,fgu_0_cur_adc = 8192 |
| <4>[ 0.979919] [1: swapper/0: 1] [c1] sprdfgu: sprdfgu_cal_init fgu_cal.cur_1000ma_adc = 2728,fgu_cal.vol_1000mv_adc = 672,fgu_cal.vol_offset = -60,fgu_cal.cur_offset = 0 |
| <6>[ 0.979949] [1: swapper/0: 1] [c1] sprdfgu: FGU_Init |
| <4>[ 0.980133] [1: swapper/0: 1] [c1] sprdfgu: fgu delta_vol_raw: 0xaab delta_current_raw 0x22c4! |
| <4>[ 0.980133] [1: swapper/0: 1] [c1] sprdfgu: fgu cmd_vol_raw: 0x0 cmd_cur_raw 0x0! |
| <3>[ 0.980163] [1: swapper/0: 1] [c1] sprdfgu: sprdfgu_cal_battery_impedance warning.....! |
| <6>[ 0.980194] [1: swapper/0: 1] [c1] sprdfgu: REG_FGU_USER_AREA_STATUS- = 0x5040 |
| <6>[ 0.980224] [1: swapper/0: 1] [c1] sprdfgu: NORMAIL_POWERTON-- sprdfgu_data.init_cap= 64 |
| <6>[ 0.980407] [1: swapper/0: 1] [c1] sprdfgu: pocv_raw = 0xb8d,pocv_voltage = 4311 |
| <6>[ 0.980407] [1: swapper/0: 1] [c1] sprdfgu: current voltage raw_data = 0xaab,cur voltage = 3974 |
| <6>[ 0.980438] [1: swapper/0: 1] [c1] sprdfgu: ocv_raw: 0xa84,ocv voltage = 3916 |
| <6>[ 0.980438] [1: swapper/0: 1] [c1] sprdfgu: current_raw: 0x22c4,current = 259 |
| <6>[ 0.980468] [1: swapper/0: 1] [c1] sprdfgu: poweron_clbcnt: 0x1f2b666,cur_cc0x1f2b666 |
| <6>[ 0.980499] [1: swapper/0: 1] [c1] sprdfgu: sprdfgu_data.poweron_rint = 200 |
| <6>[ 0.980834] [1: swapper/0: 1] [c1] sprdfgu: sprdfgu_init end |
| <3>[ 0.980987] [1: swapper/0: 1] [c1] power_supply sec-fuelgauge: driver failed to report `status' property: -22 |
| <4>[ 0.981109] [1: swapper/0: 1] [c1] thermal thermal_zone0: failed to read out thermal zone 0 |
| <3>[ 0.981170] [1: kworker/1:1: 58] [c1] power_supply sec-fuelgauge: driver failed to report `status' property: -22 |
| <6>[ 0.981201] [1: swapper/0: 1] [c1] sec_fuelgauge_probe: SEC Fuelgauge Driver Loaded |
| <6>[ 0.981262] [1: swapper/0: 1] [c1] sprd_wdt_sys: SC8830 Watchdog: userspace watchdog feeder |
| <6>[ 0.981689] [1: swapper/0: 1] [c1] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com |
| <6>[ 0.981811] [1: swapper/0: 1] [c1] [BT] bcm4343_bluetooth_probe. |
| <6>[ 0.982025] [1: swapper/0: 1] [c1] [BT] bcm4343_bluetooth_probe End |
| <6>[ 0.983154] [1: swapper/0: 1] [c1] cpuidle: using governor ladder |
| <6>[ 0.983520] [1: swapper/0: 1] [c1] cpuidle: using governor menu |
| <4>[ 0.983764] [1: swapper/0: 1] [c1] sdhost_drv_init deviceName:sdio_emmc |
| <4>[ 0.983917] [1: swapper/0: 1] [c1] sdhost_drv_init deviceName:sdio_sd |
| <4>[ 0.984069] [1: swapper/0: 1] [c1] sdhost_drv_init deviceName:sdio_wifi |
| <3>[ 0.984283] [1: swapper/0: 1] [c1] get() with no identifier |
| <4>[ 0.984283] [1: swapper/0: 1] [c1] sdhost sdio_emmc: no SD_pwr regulator found |
| <3>[ 0.984313] [1: swapper/0: 1] [c1] get() with no identifier |
| <4>[ 0.984313] [1: swapper/0: 1] [c1] sdhost sdio_emmc: no _1_8V_signal regulator found |
| <4>[ 0.984374] [1: swapper/0: 1] [c1] sdhost sdio_emmc run PM init |
| <4>[ 0.984558] [1: swapper/0: 1] [c1] sdhost sdio_emmc there is no signal voltage! |
| <4>[ 0.984588] [1: swapper/0: 1] [c1] sdhost sdio_emmc There is no signalling voltage |
| <4>[ 1.004608] [1: swapper/0: 1] [c1] sdhost sdio_emmc there is no signal voltage! |
| <4>[ 1.024688] [3: kworker/u8:0: 6] [c3] sdhost sdio_emmc: sdhost_hw_reset start. |
| <4>[ 1.024719] [3: kworker/u8:0: 6] [c3] sdhost sdio_emmc there is no signal voltage! |
| <4>[ 1.024810] [1: swapper/0: 1] [c1] vddsdcore: Failed to create debugfs directory |
| <3>[ 1.024841] [1: swapper/0: 1] [c1] get() with no identifier |
| <4>[ 1.024871] [1: swapper/0: 1] [c1] sdhost sdio_sd: no _1_8V_signal regulator found |
| <4>[ 1.024902] [1: swapper/0: 1] [c1] sdhost sdio_sd run PM init |
| <6>[ 1.025024] [1: swapper/0: 1] [c1] regu: @@@ldo_turn_on: regu 0xee946bf4 (vddsdcore), turn on |
| <4>[ 1.025054] [1: swapper/0: 1] [c1] sdhost sdio_sd there is no signal voltage! |
| <4>[ 1.025085] [1: swapper/0: 1] [c1] sdhost sdio_sd There is no signalling voltage |
| <4>[ 1.044616] [1: swapper/0: 1] [c1] sdhost sdio_sd there is no signal voltage! |
| <6>[ 1.064636] [1: swapper/0: 1] [c1] *** register_pm_notifier, nb->notifier_call:mmc_pm_notify *** |
| <3>[ 1.065032] [1: swapper/0: 1] [c1] get() with no identifier |
| <4>[ 1.065063] [1: swapper/0: 1] [c1] sdhost sdio_wifi: no SD_pwr regulator found |
| <3>[ 1.065063] [1: swapper/0: 1] [c1] get() with no identifier |
| <4>[ 1.065093] [1: swapper/0: 1] [c1] sdhost sdio_wifi: no _1_8V_signal regulator found |
| <4>[ 1.065124] [1: swapper/0: 1] [c1] sdhost sdio_wifi run PM init |
| <4>[ 1.065216] [1: swapper/0: 1] [c1] sdhost sdio_wifi there is no signal voltage! |
| <4>[ 1.065246] [1: swapper/0: 1] [c1] sdhost sdio_wifi There is no signalling voltage |
| <4>[ 1.074920] [3: kworker/u8:0: 6] [c3] sdhost sdio_emmc there is no signal voltage! |
| <4>[ 1.084625] [1: swapper/0: 1] [c1] sdhost sdio_wifi there is no signal voltage! |
| <4>[ 1.104614] [1: swapper/0: 1] [c1] mmc2, Set mmc handle for WIFI. |
| <6>[ 1.105895] [1: swapper/0: 1] [c1] Successfully registered hid_synaptics_driver |
| <6>[ 1.106842] [1: swapper/0: 1] [c1] usbcore: registered new interface driver usbhid |
| <6>[ 1.106872] [1: swapper/0: 1] [c1] usbhid: USB HID core driver |
| <6>[ 1.106964] [1: swapper/0: 1] [c1] sprd_ion_parse_dt: num_heaps=3 |
| <6>[ 1.107116] [1: swapper/0: 1] [c1] sprd_ion_parse_dt: heaps[0]: ion_heap_system type: 0 base: 0 size 0 |
| <6>[ 1.107238] [1: swapper/0: 1] [c1] sprd_ion_parse_dt: heaps[1]: ion_heap_carveout_mm type: 0 base: 0 size 0 |
| <6>[ 1.107360] [1: swapper/0: 1] [c1] sprd_ion_parse_dt: heaps[2]: ion_heap_carveout_overlay type: 2 base: 2673868800 size 4194304 |
| <6>[ 1.110626] [2: swapper/0: 1] [c2] ion_init,result:0 |
| <6>[ 1.111328] [2: swapper/0: 1] [c2] ashmem: initialized |
| <6>[ 1.111389] [2: swapper/0: 1] [c2] logger: created 512K log 'log_main' |
| <6>[ 1.111480] [2: swapper/0: 1] [c2] logger: created 512K log 'log_events' |
| <6>[ 1.111541] [2: swapper/0: 1] [c2] logger: created 512K log 'log_radio' |
| <6>[ 1.111633] [2: swapper/0: 1] [c2] logger: created 512K log 'log_system' |
| <6>[ 1.111633] [2: swapper/0: 1] [c2] sec_getlog_supply_loggerinfo: 0xedc00000 0xedd00000 0xedc80000 0xedd80000 |
| <6>[ 1.112304] [2: swapper/0: 1] [c2] sprd_adc_probe()->Line: 365 |
| <6>[ 1.112823] [2: swapper/0: 1] [c2] BM_INFO Bus Monitor mode: 0 - Pref; 1 - Debug. Current mode 1 |
| <4>[ 1.112854] [2: swapper/0: 1] [c2] BM_WRN it must be sure that there is not AP/ZIP chn! |
| <4>[ 1.112884] [2: swapper/0: 1] [c2] BM_WRN it must be sure that there is not CP0 ARM0/1 chn! |
| <4>[ 1.112884] [2: swapper/0: 1] [c2] BM_WRN it must be sure that there is not CP1 LTE chn! |
| <4>[ 1.112915] [2: swapper/0: 1] [c2] BM_WRN it must be sure that there is not CP1 DSP chn! |
| <4>[ 1.112915] [2: swapper/0: 1] [c2] BM_WRN it must be sure that there is not CP1 ARM chn! |
| <4>[ 1.112945] [2: swapper/0: 1] [c2] BM_WRN it must be sure that there is not AP HSIC chn! |
| <4>[ 1.112976] [2: swapper/0: 1] [c2] BM_WRN it must be sure that there is not AP OTG chn! |
| <4>[ 1.112976] [2: swapper/0: 1] [c2] BM_WRN it must be sure that there is not AP NANDC chn! |
| <3>[ 1.113464] [2: swapper/0: 1] [c2] BM_ERR sci_bm_get_mem_layout: dram: 0x80000000 ~ 0xBFFFFFFF |
| <3>[ 1.113494] [2: swapper/0: 1] [c2] BM_ERR sci_bm_get_mem_layout: ap_1: 0x80000000 ~ 0x877FFFFF |
| <3>[ 1.113494] [2: swapper/0: 1] [c2] BM_ERR sci_bm_get_mem_layout: shm : 0x87800000 ~ 0x87A3FFFF |
| <3>[ 1.113525] [2: swapper/0: 1] [c2] BM_ERR sci_bm_get_mem_layout: ap_2: 0x87A40000 ~ 0xFFFFFFFF |
| <3>[ 1.113525] [2: swapper/0: 1] [c2] BM_ERR sci_bm_get_mem_layout: cpge: 0x00000000 ~ 0x00000000 |
| <3>[ 1.113555] [2: swapper/0: 1] [c2] BM_ERR sci_bm_get_mem_layout: cpw : 0x88000000 ~ 0x89BFFFFF |
| <3>[ 1.113586] [2: swapper/0: 1] [c2] BM_ERR sci_bm_get_mem_layout: cpwcn: 0x00000000 ~ 0x00000000 |
| <3>[ 1.113586] [2: swapper/0: 1] [c2] BM_ERR sci_bm_get_mem_layout: cptl: 0x00000000 ~ 0x00000000 |
| <3>[ 1.113616] [2: swapper/0: 1] [c2] BM_ERR sci_bm_get_mem_layout: ap_3: 0x89C00000 ~ 0x9F00CFFF |
| <3>[ 1.113616] [2: swapper/0: 1] [c2] BM_ERR sci_bm_get_mem_layout: fb : 0x9F00D000 ~ 0x9F5FBFFF |
| <3>[ 1.113647] [2: swapper/0: 1] [c2] BM_ERR sci_bm_get_mem_layout: ion : 0x9F600000 ~ 0x9F9FFFFF |
| <3>[ 1.113677] [2: swapper/0: 1] [c2] BM_ERR Bus Monitor default config set success!!! |
| <6>[ 1.113708] [2: swapper/0: 1] [c2] BM_INFO sci_bm_probe done! |
| <6>[ 1.113769] [2: swapper/0: 1] [c2] cpufreq_scx35: chip id is 8730c001 |
| <6>[ 1.113769] [2: swapper/0: 1] [c2] cpufreq_scx35: chip id is 8730c001 |
| <3>[ 1.113800] [2: swapper/0: 1] [c2] cpufreq_scx35: soc_is_sc7715 error chip id |
| <6>[ 1.113800] [2: swapper/0: 1] [c2] cpufreq_scx35: chip id is 8730c001 |
| <6>[ 1.113800] [2: swapper/0: 1] [c2] cpufreq_scx35: chip id is 8730c001 |
| <6>[ 1.113830] [2: swapper/0: 1] [c2] cpufreq_scx35: sprd_freq_table_init |
| <6>[ 1.113830] [2: swapper/0: 1] [c2] cpufreq_scx35: --xing-- sprd_set_cpureq_limit max=1300000 min=768000 |
| <6>[ 1.113952] [2: swapper/0: 1] [c2] cpufreq_scx35: sprd_cpufreq_init policy->cpu=0, policy->cur=1300000, ret=0 |
| <4>[ 1.114196] [2: swapper/0: 1] [c2] locate in sprd_init_vibrator! |
| <6>[ 1.114318] [2: swapper/0: 1] [c2] sec_logbuf_conf_memtype: size_of_log_ptr:4 size_of_log_mag:4size_struct_sec_log_buffer:24 |
| <6>[ 1.114379] [2: swapper/0: 1] [c2] sec_logbuf_conf_memtype: Addresses: struct sec_log_buffer:f1600000 sec_log_buf:0xf1600018_log_ptr:f16ffe18 sec_log_mag:f16ffe1c |
| <6>[ 1.114379] [2: swapper/0: 1] [c2] sec_logbuf_conf_memtype: *sec_log_mag:4d474f4c *sec_log_ptr:6379f sec_log_buf:f1600018 sec_log_size:1048064 |
| <4>[ 1.125183] [3: kworker/u8:0: 6] [c3] sdhost sdio_emmc: sdhost_hw_reset end. |
| <4>[ 1.125518] I[0: swapper/0: 0] [c0] sdhost sdio_emmc int 0x18000 |
| <4>[ 1.125915] I[0: swapper/0: 0] [c0] sdhost sdio_emmc int 0x18000 |
| <4>[ 1.129547] I[0: swapper/0: 0] [c0] sdhost sdio_emmc int 0x18000 |
| <4>[ 1.129913] I[0: swapper/0: 0] [c0] sdhost sdio_emmc int 0x18000 |
| <4>[ 1.130310] I[0: swapper/0: 0] [c0] sdhost sdio_emmc int 0x18000 |
| <4>[ 1.130676] I[0: swapper/0: 0] [c0] sdhost sdio_emmc int 0x18000 |
| <4>[ 1.131042] I[0: swapper/0: 0] [c0] sdhost sdio_emmc int 0x18000 |
| <4>[ 1.131408] I[0: swapper/0: 0] [c0] sdhost sdio_emmc int 0x18000 |
| <4>[ 1.131805] I[0: swapper/0: 0] [c0] sdhost sdio_emmc int 0x18000 |
| <4>[ 1.132171] I[0: swapper/0: 0] [c0] sdhost sdio_emmc int 0x18000 |
| <4>[ 1.132568] I[0: swapper/0: 0] [c0] sdhost sdio_emmc int 0x18000 |
| <6>[ 1.167480] [0: kworker/u8:0: 6] [c0] mmc0: BKOPS_EN bit is not set |
| <4>[ 1.169555] [0: kworker/u8:0: 6] [c0] mmc0: mmc_init_card success |
| <6>[ 1.169586] [0: kworker/u8:0: 6] [c0] mmc0: new high speed DDR MMC card at address 0001 |
| <4>[ 1.169799] [0: kworker/u8:0: 6] [c0] sprd-sdio-card: probe of mmc0:0001 failed with error -22 |
| <6>[ 1.170227] [0: kworker/u8:0: 6] [c0] mmcblk0: mmc0:0001 FN12MB 7.28 GiB |
| <6>[ 1.170715] [0: kworker/u8:0: 6] [c0] mmcblk0boot0: mmc0:0001 FN12MB partition 1 4.00 MiB |
| <6>[ 1.171203] [0: kworker/u8:0: 6] [c0] mmcblk0boot1: mmc0:0001 FN12MB partition 2 4.00 MiB |
| <6>[ 1.171691] [0: kworker/u8:0: 6] [c0] mmcblk0rpmb: mmc0:0001 FN12MB partition 3 512 KiB |
| <4>[ 1.175323] [1: kworker/u8:0: 6] [c1] GPT:Primary header thinks Alt. header is not at the end of the disk. |
| <4>[ 1.175354] [1: kworker/u8:0: 6] [c1] GPT:15253503 != 15269887 |
| <4>[ 1.175384] [1: kworker/u8:0: 6] [c1] GPT:Alternate GPT header not at the end of the disk. |
| <4>[ 1.175384] [1: kworker/u8:0: 6] [c1] GPT:15253503 != 15269887 |
| <4>[ 1.175415] [1: kworker/u8:0: 6] [c1] GPT: Use GNU Parted to correct GPT errors. |
| <6>[ 1.175537] [1: kworker/u8:0: 6] [c1] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 |
| <6>[ 1.179443] [1: kworker/u8:0: 6] [c1] mmcblk0boot1: unknown partition table |
| <6>[ 1.180389] [1: kworker/u8:0: 6] [c1] mmcblk0boot0: unknown partition table |
| <4>[ 1.180633] [1: kworker/u8:0: 6] [c1] sdhost sdio_sd there is no signal voltage! |
| <4>[ 1.180664] [1: kworker/u8:0: 6] [c1] mmc_regulator_set_ocr regulator_disable |
| <6>[ 1.180694] [1: kworker/u8:0: 6] [c1] regu: @@@ldo_turn_off: regu 0xee946bf4 (vddsdcore), turn off |
| <6>[ 1.180694] [1: kworker/u8:0: 6] [c1] event:0x80, best_data:0x0 |
| <6>[ 1.180725] [1: kworker/u8:0: 6] [c1] sc271x_regulator_event()->Line:395, --REGULATOR_EVENT_DISABLE--> vddsdcore event 128 |
| <4>[ 1.181152] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <6>[ 1.181396] [2: swapper/0: 1] [c2] sec_log_save_old: saved old log at 262144@ede00000 |
| <6>[ 1.181427] [2: swapper/0: 1] [c2] sec_getlog_supply_kloginfo: 0xf1600018 |
| <4>[ 1.181610] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <6>[ 1.181976] [2: swapper/0: 1] [c2] spipe: after parse device tree, name=spipe_w, dst=2, channel=4, ringnr=11, rxbuf_size=4096, txbuf_size=4096 |
| <6>[ 1.182830] [3: swapper/0: 1] [c3] spipe: after parse device tree, name=slog_w, dst=2, channel=5, ringnr=1, rxbuf_size=262144, txbuf_size=32768 |
| <6>[ 1.183166] [3: swapper/0: 1] [c3] spipe: after parse device tree, name=stty_w, dst=2, channel=6, ringnr=32, rxbuf_size=2048, txbuf_size=2048 |
| <6>[ 1.183532] [2: sbuf-2-6: 102] [c2] sbuf-2-6 is ready! |
| <6>[ 1.184997] [2: sbuf-2-4: 100] [c2] sbuf-2-4 is ready! |
| <6>[ 1.185272] [3: swapper/0: 1] [c3] SETH: after parse device tree, name=rmnet0, dst=2, channel=7, blocknum=128 |
| <4>[ 1.185455] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <4>[ 1.185943] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <6>[ 1.186218] [3: swapper/0: 1] [c3] SETH: after parse device tree, name=rmnet1, dst=2, channel=8, blocknum=64 |
| <6>[ 1.186340] [2: sblock-2-7: 103] [c2] sblock-2-7 is ready! |
| <4>[ 1.186401] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <6>[ 1.186767] [2: sblock-2-8: 104] [c2] sblock-2-8 is ready! |
| <4>[ 1.186859] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <6>[ 1.186920] [3: swapper/0: 1] [c3] SETH: after parse device tree, name=rmnet2, dst=2, channel=9, blocknum=64 |
| <6>[ 1.187133] [2: sbuf-2-5: 101] [c2] sbuf-2-5 is ready! |
| <4>[ 1.187316] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <6>[ 1.187347] [2: sblock-2-9: 105] [c2] sblock-2-9 is ready! |
| <6>[ 1.187652] [3: swapper/0: 1] [c3] [SENSOR] gp2a_i2c_probe, start |
| <6>[ 1.187683] [3: swapper/0: 1] [c3] [SENSOR] gp2a_regulator_onoff on |
| <6>[ 1.187774] [3: swapper/0: 1] [c3] regu: @@@ldo_set_voltage: regu 0xee946ed4 (vddsim2) set voltage, 2850000(uV) 2850000(uV) |
| <4>[ 1.187805] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <6>[ 1.187835] [3: swapper/0: 1] [c3] regu: @@@ldo_turn_on: regu 0xee946ed4 (vddsim2), turn on |
| <4>[ 1.188293] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <4>[ 1.188751] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <4>[ 1.189208] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <4>[ 1.189666] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <4>[ 1.189758] [0: kworker/u8:0: 6] [c0] sdhost sdio_wifi there is no signal voltage! |
| <4>[ 1.189788] [0: kworker/u8:0: 6] [c0] sdhost sdio_wifi there is no signal voltage! |
| <4>[ 1.189788] [0: kworker/u8:0: 6] [c0] sdhost sdio_wifi There is no signalling voltage |
| <4>[ 1.204620] [0: kworker/u8:0: 6] [c0] sdhost sdio_wifi there is no signal voltage! |
| <6>[ 1.214477] [3: swapper/0: 1] [c3] [SENSOR] gp2a_leda_onoff on |
| <4>[ 1.225097] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <4>[ 1.225677] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <4>[ 1.229553] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <4>[ 1.230133] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <4>[ 1.230712] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <4>[ 1.231292] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <4>[ 1.231872] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <4>[ 1.232452] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <4>[ 1.233032] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <4>[ 1.233612] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <4>[ 1.234191] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <4>[ 1.234771] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <4>[ 1.234863] [0: kworker/u8:0: 6] [c0] sdhost sdio_wifi there is no signal voltage! |
| <4>[ 1.234863] [0: kworker/u8:0: 6] [c0] sdhost sdio_wifi there is no signal voltage! |
| <4>[ 1.234893] [0: kworker/u8:0: 6] [c0] sdhost sdio_wifi There is no signalling voltage |
| <6>[ 1.245422] I[0: swapper/0: 1] [c0] [SENSOR] gp2a_irq_handler, 377 |
| <6>[ 1.246612] [0: kworker/0:0: 4] [c0] [SENSOR] gp2a_prox_work_func, 1 |
| <6>[ 1.246734] [0: swapper/0: 1] [c0] [SENSOR] gp2a_setup_irq, request_irq(377) success for gpio 216 |
| <6>[ 1.247131] [0: swapper/0: 1] [c0] [SENSOR] gp2a_leda_onoff off |
| <4>[ 1.254516] [0: kworker/u8:0: 6] [c0] sdhost sdio_wifi there is no signal voltage! |
| <6>[ 1.274658] [1: swapper/0: 1] [c1] [SENSOR] gp2a_i2c_probe done |
| <6>[ 1.274658] [1: swapper/0: 1] [c1] [SENSOR] gp2a_regulator_onoff off |
| <6>[ 1.274780] [1: swapper/0: 1] [c1] regu: @@@ldo_set_voltage: regu 0xee946ed4 (vddsim2) set voltage, 2850000(uV) 2850000(uV) |
| <6>[ 1.274841] [1: swapper/0: 1] [c1] regu: @@@ldo_turn_off: regu 0xee946ed4 (vddsim2), turn off |
| <4>[ 1.275390] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <4>[ 1.276184] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <4>[ 1.280334] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <4>[ 1.281127] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <4>[ 1.281890] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <4>[ 1.282684] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <4>[ 1.283477] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <4>[ 1.284240] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <4>[ 1.285034] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <4>[ 1.285827] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <4>[ 1.286621] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <4>[ 1.287384] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <4>[ 1.287445] [0: kworker/u8:0: 6] [c0] sdhost sdio_wifi there is no signal voltage! |
| <4>[ 1.287445] [0: kworker/u8:0: 6] [c0] sdhost sdio_wifi there is no signal voltage! |
| <4>[ 1.287475] [0: kworker/u8:0: 6] [c0] sdhost sdio_wifi There is no signalling voltage |
| <4>[ 1.304626] [0: kworker/u8:0: 6] [c0] sdhost sdio_wifi there is no signal voltage! |
| <6>[ 1.304656] [2: swapper/0: 1] [c2] [SENSOR]: k2hh_probe - Probe Start! |
| <6>[ 1.304687] [2: swapper/0: 1] [c2] [SENSOR] k2hh_regulator_onoff |
| <6>[ 1.305847] [3: swapper/0: 1] [c3] [SENSOR] k2hh_set_mode - change mode 1 |
| <6>[ 1.306274] [3: swapper/0: 1] [c3] [SENSOR]: k2hh_probe - chip id success 0x41 |
| <6>[ 1.307708] [0: swapper/0: 1] [c0] [SENSOR] k2hh_set_range - 0x20 |
| <6>[ 1.308441] [0: swapper/0: 1] [c0] [SENSOR] k2hh_set_mode - change mode 0 |
| <6>[ 1.308471] [0: swapper/0: 1] [c0] [SENSOR] k2hh_regulator_onoff |
| <6>[ 1.308471] [0: swapper/0: 1] [c0] [SENSOR]: k2hh_probe - Probe done! |
| <6>[ 1.308563] [0: swapper/0: 1] [c0] [SENSOR]: yas_probe - Probe Start! |
| <6>[ 1.314910] [0: swapper/0: 1] [c0] [SENSOR] yas_parse_dt: chip_pos = 4 |
| <6>[ 1.314971] [0: swapper/0: 1] [c0] [SENSOR]: yas_probe - Probe done! |
| <4>[ 1.315277] [0: swapper/0: 1] [c0] saudio: snd_saudio_probe: sprd,saudio-dst-id is 2 |
| <4>[ 1.315307] [0: swapper/0: 1] [c0] saudio: snd_saudio_probe: sprd,ctrl_channel is 10 |
| <4>[ 1.315307] [0: swapper/0: 1] [c0] saudio: snd_saudio_probe: sprd,playback_channel is 11 |
| <4>[ 1.315338] [0: swapper/0: 1] [c0] saudio: snd_saudio_probe: sprd,capture_channel is 12 |
| <4>[ 1.315368] [0: swapper/0: 1] [c0] saudio: snd_saudio_probe: sprd,monitor_channel is 13 |
| <4>[ 1.315368] [0: swapper/0: 1] [c0] saudio: snd_saudio_probe: sprd,saudio-names is VIRTUAL AUDIO W |
| <4>[ 1.315490] [0: swapper/0: 1] [c0] saudio:workqueue create oksaudio: snd_saudio_probe: sprd,saudio-dst-id is 2 |
| <4>[ 1.315673] [0: swapper/0: 1] [c0] saudio: snd_saudio_probe: sprd,ctrl_channel is 14 |
| <4>[ 1.315673] [0: swapper/0: 1] [c0] saudio: snd_saudio_probe: sprd,playback_channel is 15 |
| <4>[ 1.315704] [0: swapper/0: 1] [c0] saudio: snd_saudio_probe: sprd,capture_channel is 16 |
| <4>[ 1.315704] [0: swapper/0: 1] [c0] saudio: snd_saudio_probe: sprd,monitor_channel is 17 |
| <4>[ 1.315734] [0: swapper/0: 1] [c0] saudio: snd_saudio_probe: sprd,saudio-names is saudiovoip |
| <4>[ 1.315856] [1: swapper/0: 1] [c1] saudio:workqueue create ok |
| <6>[ 1.316192] [1: swapper/0: 1] usbcore: registered new interface driver snd-usb-audio |
| <6>[ 1.316467] [2: saudio-2-10: 109] [c2] saudio_ctrl_thread,saudio: waiting for modem boot handshake,dst 2,channel 10 |
| <3>[ 1.316497] [2: saudio-2-10: 109] [c2] sblock-2-13 not ready! |
| <3>[ 1.316528] [2: saudio-2-10: 109] [c2] Error: sblock_receive dst 2, channel 13 result is -5 |
| <6>[ 1.316650] [0: saudio-2-14: 111] [c0] saudio_ctrl_thread,saudio: waiting for modem boot handshake,dst 2,channel 14 |
| <3>[ 1.316650] [0: saudio-2-14: 111] [c0] sblock-2-17 not ready! |
| <3>[ 1.316680] [0: saudio-2-14: 111] [c0] Error: sblock_receive dst 2, channel 17 result is -5 |
| <6>[ 1.316864] [1: swapper/0: 1] [c1] [ASoC:POWER] Probe 1 |
| <6>[ 1.316986] [1: swapper/0: 1] [c1] SRG_VREG: normal standby |
| <6>[ 1.317077] [1: swapper/0: 1] [c1] [ASoC:POWER] Register VREG Success! |
| <6>[ 1.317108] [1: swapper/0: 1] [c1] [ASoC:POWER] Probe 2 |
| <6>[ 1.317169] [1: swapper/0: 1] [c1] SRG_VB: normal standby |
| <6>[ 1.317230] [1: swapper/0: 1] [c1] SRG_VB: supplied by SRG_VREG |
| <6>[ 1.317291] [1: swapper/0: 1] [c1] [ASoC:POWER] Register VB Success! |
| <6>[ 1.317321] [1: swapper/0: 1] [c1] [ASoC:POWER] Probe 3 |
| <6>[ 1.317413] [1: swapper/0: 1] [c1] SRG_BG: normal standby |
| <6>[ 1.317443] [1: swapper/0: 1] [c1] SRG_BG: supplied by SRG_VB |
| <6>[ 1.317565] [1: swapper/0: 1] [c1] [ASoC:POWER] Register BG Success! |
| <6>[ 1.317596] [1: swapper/0: 1] [c1] [ASoC:POWER] Probe 4 |
| <6>[ 1.317596] [1: swapper/0: 1] [c1] [ASoC:POWER] min_uV:150000, max_uV:300000 |
| <6>[ 1.317626] [0: sblock-2-17: 113] [c0] sblock-2-17 is ready! |
| <6>[ 1.317687] [3: sblock-2-13: 112] [c3] sblock-2-13 is ready! |
| <6>[ 1.317687] [1: swapper/0: 1] [c1] SRG_BG_IBIAS: 150 <--> 300 mV at 150 mV normal standby |
| <6>[ 1.317749] [1: swapper/0: 1] [c1] SRG_BG_IBIAS: supplied by SRG_BG |
| <6>[ 1.317810] [1: swapper/0: 1] [c1] [ASoC:POWER] Register BG_IBIAS Success! |
| <6>[ 1.317840] [1: swapper/0: 1] [c1] [ASoC:POWER] Probe 5 |
| <6>[ 1.317871] [1: swapper/0: 1] [c1] [ASoC:POWER] min_uV:2800000, max_uV:3600000 |
| <6>[ 1.317962] [1: swapper/0: 1] [c1] SRG_VCOM: 2800 <--> 3600 mV at 2800 mV normal standby |
| <6>[ 1.317993] [1: swapper/0: 1] [c1] SRG_VCOM: supplied by SRG_BG_IBIAS |
| <6>[ 1.318054] [1: swapper/0: 1] [c1] [ASoC:POWER] Register VCOM Success! |
| <6>[ 1.318084] [1: swapper/0: 1] [c1] [ASoC:POWER] Probe 6 |
| <6>[ 1.318176] [1: swapper/0: 1] [c1] SRG_VCOM_BUF: normal standby |
| <6>[ 1.318237] [1: swapper/0: 1] [c1] SRG_VCOM_BUF: supplied by SRG_VCOM |
| <6>[ 1.318298] [1: swapper/0: 1] [c1] [ASoC:POWER] Register VCOM_BUF Success! |
| <6>[ 1.318328] [1: swapper/0: 1] [c1] [ASoC:POWER] Probe 7 |
| <6>[ 1.318420] [1: swapper/0: 1] [c1] SRG_VBO: normal standby |
| <6>[ 1.318450] [1: swapper/0: 1] [c1] SRG_VBO: supplied by SRG_VB |
| <6>[ 1.318542] [1: swapper/0: 1] [c1] [ASoC:POWER] Register VBO Success! |
| <6>[ 1.318572] [1: swapper/0: 1] [c1] [ASoC:POWER] Probe 8 |
| <6>[ 1.318572] [1: swapper/0: 1] [c1] [ASoC:POWER] min_uV:2200000, max_uV:3000000 |
| <6>[ 1.318603] [0: sblock-2-14: 115] [c0] sblock-2-14 is ready! |
| <6>[ 1.318695] [1: swapper/0: 1] [c1] SRG_VMICBIAS: 2200 <--> 3000 mV at 2200 mV normal standby |
| <6>[ 1.318725] [1: swapper/0: 1] [c1] SRG_VMICBIAS: supplied by SRG_VCOM |
| <6>[ 1.318817] [1: swapper/0: 1] [c1] [ASoC:POWER] Register VMICBIAS Success! |
| <6>[ 1.318847] [1: swapper/0: 1] [c1] [ASoC:POWER] Probe 9 |
| <6>[ 1.318939] [1: swapper/0: 1] [c1] SRG_MICBIAS: normal standby |
| <6>[ 1.318969] [2: sblock-2-10: 114] [c2] sblock-2-10 is ready! |
| <6>[ 1.319000] [1: swapper/0: 1] [c1] SRG_MICBIAS: supplied by SRG_VMICBIAS |
| <6>[ 1.319061] [1: swapper/0: 1] [c1] [ASoC:POWER] Register MICBIAS Success! |
| <6>[ 1.319091] [1: swapper/0: 1] [c1] [ASoC:POWER] Probe 10 |
| <6>[ 1.319152] [1: swapper/0: 1] [c1] SRG_AUXMICBIAS: normal standby |
| <6>[ 1.319213] [1: swapper/0: 1] [c1] SRG_AUXMICBIAS: supplied by SRG_VMICBIAS |
| <6>[ 1.319274] [1: swapper/0: 1] [c1] [ASoC:POWER] Register AUXMICBIAS Success! |
| <6>[ 1.319305] [3: sblock-2-15: 117] [c3] sblock-2-15 is ready! |
| <6>[ 1.319305] [1: swapper/0: 1] [c1] [ASoC:POWER] Probe 11 |
| <6>[ 1.319335] [1: swapper/0: 1] [c1] [ASoC:POWER] min_uV:400000, max_uV:1000000 |
| <6>[ 1.319427] [1: swapper/0: 1] [c1] SRG_HEADMICBIAS: 400 <--> 1000 mV at 1000 mV normal standby |
| <6>[ 1.319458] [1: swapper/0: 1] [c1] SRG_HEADMICBIAS: supplied by SRG_VMICBIAS |
| <6>[ 1.319549] [1: swapper/0: 1] [c1] [ASoC:POWER] Register HEADMICBIAS Success! |
| <6>[ 1.319580] [1: swapper/0: 1] [c1] [ASoC:POWER] Probe 12 |
| <6>[ 1.319610] [1: swapper/0: 1] [c1] [ASoC:POWER] min_uV:1600000, max_uV:3400000 |
| <6>[ 1.319641] [3: sblock-2-11: 116] [c3] sblock-2-11 is ready! |
| <6>[ 1.319702] [1: swapper/0: 1] [c1] SRG_CGLDO: 1600 <--> 3400 mV at 1600 mV normal standby |
| <6>[ 1.319763] [1: swapper/0: 1] [c1] SRG_CGLDO: supplied by SRG_VREG |
| <6>[ 1.319824] [1: swapper/0: 1] [c1] [ASoC:POWER] Register CGLDO Success! |
| <6>[ 1.319976] [3: sblock-2-16: 119] [c3] sblock-2-16 is ready! |
| <6>[ 1.320159] [1: swapper/0: 1] [c1] u32 classifier |
| <6>[ 1.320190] [1: swapper/0: 1] [c1] Actions configured |
| <6>[ 1.320190] [1: swapper/0: 1] [c1] Netfilter messages via NETLINK v0.30. |
| <6>[ 1.320281] [0: sblock-2-12: 118] [c0] sblock-2-12 is ready! |
| <6>[ 1.320312] [1: swapper/0: 1] [c1] nf_conntrack version 0.5.0 (15300 buckets, 61200 max) |
| <6>[ 1.320770] [1: swapper/0: 1] [c1] ctnetlink v0.93: registering with nfnetlink. |
| <6>[ 1.320892] [1: swapper/0: 1] [c1] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 |
| <6>[ 1.320892] [1: swapper/0: 1] [c1] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. |
| <6>[ 1.321258] [1: swapper/0: 1] [c1] xt_time: kernel timezone is -0000 |
| <6>[ 1.321380] [1: swapper/0: 1] [c1] gre: GRE over IPv4 demultiplexor driver |
| <6>[ 1.321594] [1: swapper/0: 1] [c1] ip_tables: (C) 2000-2006 Netfilter Core Team |
| <6>[ 1.321807] [1: swapper/0: 1] [c1] arp_tables: (C) 2002 David S. Miller |
| <6>[ 1.321899] [1: swapper/0: 1] [c1] TCP: cubic registered |
| <6>[ 1.321899] [1: swapper/0: 1] [c1] Initializing XFRM netlink socket |
| <6>[ 1.322265] [1: swapper/0: 1] [c1] NET: Registered protocol family 10 |
| <6>[ 1.323181] [1: swapper/0: 1] [c1] mip6: Mobile IPv6 |
| <6>[ 1.323211] [1: swapper/0: 1] [c1] ip6_tables: (C) 2000-2006 Netfilter Core Team |
| <6>[ 1.323394] [1: swapper/0: 1] [c1] sit: IPv6 over IPv4 tunneling driver |
| <6>[ 1.324218] [1: swapper/0: 1] [c1] NET: Registered protocol family 17 |
| <6>[ 1.324249] [1: swapper/0: 1] [c1] NET: Registered protocol family 15 |
| <6>[ 1.324310] [1: swapper/0: 1] [c1] l2tp_core: L2TP core driver, V2.0 |
| <6>[ 1.324340] [1: swapper/0: 1] [c1] l2tp_ppp: PPPoL2TP kernel driver, V2.0 |
| <6>[ 1.324676] [1: swapper/0: 1] [c1] sprd_thermal_probe id:-1 |
| <6>[ 1.324737] [1: swapper/0: 1] [c1] sprd-thermal 402f0000.sprd_thermal: def cdev name:is thermal-cpufreq-0 |
| <6>[ 1.324737] [1: swapper/0: 1] [c1] sprd-thermal 402f0000.sprd_thermal: trip[0] temp: 65 lowoff: 0 |
| <6>[ 1.324768] [1: swapper/0: 1] [c1] sprd-thermal 402f0000.sprd_thermal: def cdev name:is thermal-cpufreq-0 |
| <6>[ 1.324768] [1: swapper/0: 1] [c1] sprd-thermal 402f0000.sprd_thermal: trip[1] temp: 69 lowoff: 57 |
| <6>[ 1.324798] [1: swapper/0: 1] [c1] sprd-thermal 402f0000.sprd_thermal: def cdev name:is thermal-cpufreq-0 |
| <6>[ 1.324829] [1: swapper/0: 1] [c1] sprd-thermal 402f0000.sprd_thermal: trip[2] temp: 95 lowoff: 61 |
| <6>[ 1.324829] [1: swapper/0: 1] [c1] sprd-thermal 402f0000.sprd_thermal: def cdev name:is thermal-cpufreq-0 |
| <6>[ 1.324859] [1: swapper/0: 1] [c1] sprd-thermal 402f0000.sprd_thermal: trip[3] temp: 110 lowoff: 80 |
| <3>[ 1.324859] [1: swapper/0: 1] [c1] sprd-thermal 402f0000.sprd_thermal: pzone->ops =NULL id =0 |
| <6>[ 1.324920] [1: swapper/0: 1] [c1] sprd_thermal_probe id:-1 |
| <6>[ 1.324951] [1: swapper/0: 1] [c1] sprd-thermal 40038280.sprd_thermal1: def cdev name:is thermal-cpufreq-0 |
| <6>[ 1.324951] [1: swapper/0: 1] [c1] sprd-thermal 40038280.sprd_thermal1: trip[0] temp: 90 lowoff: 81 |
| <3>[ 1.324981] [1: swapper/0: 1] [c1] sprd-thermal 40038280.sprd_thermal1: pzone->ops =NULL id =1 |
| <6>[ 1.325927] [1: swapper/0: 1] [c1] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 |
| <4>[ 1.326049] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <4>[ 1.326721] [1: swapper/0: 1] [c1] dt version i2s->dai_name i2s_bt_sco0 |
| <4>[ 1.326751] [1: swapper/0: 1] [c1] warning:Must give me the config_type! default is pcm |
| <4>[ 1.326751] [1: swapper/0: 1] [c1] i2s config_type (null) |
| <4>[ 1.326782] [1: swapper/0: 1] [c1] i2s->i2s_dai_driver[0].name i2s_bt_sco0 |
| <4>[ 1.326812] [1: swapper/0: 1] [c1] i2s->i2s_dai_driver[1].name i2s_bt_sco_dummy |
| <4>[ 1.326965] [1: swapper/0: 1] [c1] dt version i2s->dai_name i2s_bt_sco1 |
| <4>[ 1.326965] [1: swapper/0: 1] [c1] warning:Must give me the config_type! default is pcm |
| <4>[ 1.326995] [1: swapper/0: 1] [c1] i2s config_type (null) |
| <4>[ 1.327026] [1: swapper/0: 1] [c1] i2s->i2s_dai_driver[0].name i2s_bt_sco1 |
| <4>[ 1.327026] [1: swapper/0: 1] [c1] i2s->i2s_dai_driver[1].name i2s_bt_sco_dummy |
| <4>[ 1.327178] [1: swapper/0: 1] [c1] dt version i2s->dai_name i2s_bt_sco2 |
| <4>[ 1.327209] [1: swapper/0: 1] [c1] warning:Must give me the config_type! default is pcm |
| <4>[ 1.327209] [1: swapper/0: 1] [c1] i2s config_type (null) |
| <4>[ 1.327239] [1: swapper/0: 1] [c1] i2s->i2s_dai_driver[0].name i2s_bt_sco2 |
| <4>[ 1.327270] [1: swapper/0: 1] [c1] i2s->i2s_dai_driver[1].name i2s_bt_sco_dummy |
| <4>[ 1.327423] [1: swapper/0: 1] [c1] dt version i2s->dai_name i2s_bt_sco3 |
| <4>[ 1.327423] [1: swapper/0: 1] [c1] warning:Must give me the config_type! default is pcm |
| <4>[ 1.327453] [1: swapper/0: 1] [c1] i2s config_type (null) |
| <4>[ 1.327484] [1: swapper/0: 1] [c1] i2s->i2s_dai_driver[0].name i2s_bt_sco3 |
| <4>[ 1.327484] [1: swapper/0: 1] [c1] i2s->i2s_dai_driver[1].name i2s_bt_sco_dummy |
| <4>[ 1.327636] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <6>[ 1.328155] [1: swapper/0: 1] [c1] *** register_pm_notifier, nb->notifier_call:wakeup_reason_pm_event *** |
| <6>[ 1.328186] [1: swapper/0: 1] [c1] zswap: loading zswap |
| <6>[ 1.328216] [1: swapper/0: 1] [c1] zpool: creating pool type zsmalloc |
| <6>[ 1.328369] [1: swapper/0: 1] [c1] zpool: created zsmalloc pool |
| <6>[ 1.328369] [1: swapper/0: 1] [c1] zswap: using zsmalloc pool |
| <6>[ 1.328430] [1: swapper/0: 1] [c1] zswap: using lzo compressor |
| <6>[ 1.328704] [1: swapper/0: 1] [c1] sm5504:sm5504_probe() line-1577: SiliconMitus SM5504 driver 2.1.0SPRD probing... |
| <6>[ 1.331542] [1: swapper/0: 1] [c1] sm5504:sm5504_probe() line-1634: Request IRQ 310(GPIO 149)... |
| <4>[ 1.332885] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <6>[ 1.334106] [1: swapper/0: 1] [c1] SM5504 : SiliconMitus SM5504 MUIC driver 2.1.0SPRD initialize successfully |
| <4>[ 1.334442] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <6>[ 1.335144] [1: kworker/1:1: 58] [c1] sm5504:sm5504_init_work() line-1344: INT1 = 0x20 |
| <4>[ 1.336059] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <6>[ 1.336120] [1: kworker/1:1: 58] [c1] sm5504:sm5504_init_work() line-1346: INT2 = 0x0 |
| <4>[ 1.337585] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <4>[ 1.339111] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <4>[ 1.340637] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <6>[ 1.341125] [1: kworker/1:1: 58] [c1] sm5504_irq_work : INTF1 = 0x20, INTF2 = 0x0 |
| <6>[ 1.341125] [1: kworker/1:1: 58] [c1] sm5504_irq_work : DEV1 = 0x4, DEV2 = 0x0 |
| <6>[ 1.341156] [1: kworker/1:1: 58] [c1] sm5504_irq_work : ADC = 0x1f |
| <6>[ 1.342132] [1: kworker/1:1: 58] [c1] sm5504:sm5504_irq_work() line-1212: sm5504_irq_work : CONTROL = 0xe4 |
| <6>[ 1.342132] [1: kworker/1:1: 58] [c1] sm5504:sm5504_get_cable_type_by_device_reg() line-478: Device = 0x4, 0x0 |
| <6>[ 1.342163] [1: kworker/1:1: 58] [c1] sm5504:sm5504_irq_work() line-1252: Status : cable type = 2, |
| <6>[ 1.342163] [1: kworker/1:1: 58] vbus = 1, accessory = 1 |
| <6>[ 1.342163] [1: kworker/1:1: 58] ocp = 0, ovp = 0, otp = 0, |
| <6>[ 1.342163] [1: kworker/1:1: 58] adc_chg = 0, cable_chg = 1 |
| <6>[ 1.342163] [1: kworker/1:1: 58] otg = 0, dcdt = 0, usb = 1, |
| <6>[ 1.342163] [1: kworker/1:1: 58] uart = 0, jig = 0 |
| <6>[ 1.342163] [1: kworker/1:1: 58] 200k usb cable = 0 |
| <4>[ 1.342193] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <6>[ 1.342254] [1: kworker/1:1: 58] [c1] sm5504:sm5504_irq_work() line-1266: SM5504 set the vbus noti to usb |
| <6>[ 1.342285] [1: kworker/1:1: 58] [c1] usb_notifier: sec_cable_log MUIC_VBUS_NOTI vbus:1 |
| <6>[ 1.342285] [1: kworker/1:1: 58] [c1] usb_notify: send_otg_notify event=vbus_power(15) enable=1 |
| <6>[ 1.342315] [1: kworker/1:1: 58] [c1] usb_notify: extra_notifier_callback event=vbus_power(15) |
| <6>[ 1.342315] [1: kworker/1:1: 58] [c1] usb_notify: extra_notify_state+ event=vbus_power(15), enable=on |
| <6>[ 1.342346] [1: kworker/1:1: 58] [c1] usb_notify: extra_notify_state- event=vbus_power(15), cable=none |
| <6>[ 1.342376] [1: kworker/1:1: 58] [c1] sm5504:sm5504_cable_change_handler() line-744: Cable change to MUIC_SM5504_CABLE_TYPE_USB |
| <6>[ 1.342376] [1: kworker/1:1: 58] [c1] sec_charger_cb: cable type (0x02) |
| <6>[ 1.342407] [1: kworker/1:1: 58] [c1] sec_charger_cb: otg_enable_flag (0) |
| <3>[ 1.342407] [1: kworker/1:1: 58] [c1] sec_charger_cb: fail to get battery psy |
| <6>[ 1.342437] [1: kworker/1:1: 58] [c1] sm5504:sm5504_usb_attach_handler() line-822: USB attached |
| <6>[ 1.342437] [1: kworker/1:1: 58] [c1] usb_notifier: sec_cable_log MUIC_USB_ATTACH_NOTI vbus:1 |
| <6>[ 1.342468] [1: kworker/1:1: 58] [c1] usb_notify: send_otg_notify event=vbus(1) enable=1 |
| <6>[ 1.342468] [1: kworker/1:1: 58] [c1] usb_notify: send_otg_notify reserve event |
| <6>[ 1.343231] [1: swapper/0: 1] [c1] init_wifi_mem: WIFI MEM Allocated |
| <7>[ 1.343414] [1: swapper/0: 1] [c1] usb: init |
| <7>[ 1.343536] [1: swapper/0: 1] [c1] usb: android_bind disconnect |
| <6>[ 1.343566] [1: swapper/0: 1] [c1] usb_notify: get_usb_mode usb mode=0 |
| <4>[ 1.343566] [1: swapper/0: 1] [c1] usb: pullup, d->enable = 0, d->vbus=0 |
| |
| <4>[ 1.343719] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <6>[ 1.343749] [1: swapper/0: 1] [c1] file system registered |
| <7>[ 1.344116] [1: swapper/0: 1] [c1] [mtp_setup] line = [1764] |
| <7>[ 1.344573] [1: swapper/0: 1] [c1] usb: usb_string_id cdev(0xed853e00)->next_string_id=1 |
| <6>[ 1.344818] [1: swapper/0: 1] [c1] android_usb gadget: Mass Storage Function, version: 2009/09/11 |
| <6>[ 1.344848] [1: swapper/0: 1] [c1] android_usb gadget: Number of LUNs=2 |
| <6>[ 1.344848] [1: swapper/0: 1] [c1] lun0: LUN: removable file: (no medium) |
| <6>[ 1.344879] [1: swapper/0: 1] [c1] lun1: LUN: removable file: (no medium) |
| <7>[ 1.345123] [1: swapper/0: 1] [c1] usb: usb_string_id cdev(0xed853e00)->next_string_id=2 |
| <7>[ 1.345123] [1: swapper/0: 1] [c1] usb: usb_string_id cdev(0xed853e00)->next_string_id=3 |
| <7>[ 1.345153] [1: swapper/0: 1] [c1] usb: usb_string_id cdev(0xed853e00)->next_string_id=4 |
| <6>[ 1.345184] [1: swapper/0: 1] [c1] android_usb gadget: android_usb ready |
| <6>[ 1.345184] [1: swapper/0: 1] [c1] dwc_usb_gadget_start |
| <6>[ 1.345214] [1: swapper/0: 1] [c1] [SPRD_GPIO_KEYS_DBG] func: gpio_keys_init line: 0946 |
| <4>[ 1.345275] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <6>[ 1.345428] [1: swapper/0: 1] [c1] [SPRD_GPIO_KEYS_INFO] Find the node name:gpio_keys |
| <6>[ 1.345489] [1: swapper/0: 1] [c1] [SPRD_GPIO_KEYS_INFO] Find the device name:gpio_keys.19 |
| <6>[ 1.345611] [1: swapper/0: 1] [c1] [SPRD_GPIO_KEYS_DBG] func: gpio_keys_probe line: 0746 |
| <6>[ 1.345642] [1: swapper/0: 1] [c1] [SPRD_GPIO_KEYS_WARN] failed to get input-name |
| <4>[ 1.345642] [1: swapper/0: 1] [c1] gpio-keys gpio_keys.19: Found button without gpios |
| <4>[ 1.345672] [1: swapper/0: 1] [c1] gpio-keys: probe of gpio_keys.19 failed with error -22 |
| <6>[ 1.345825] [1: swapper/0: 1] [c1] [SPRD_HEADSET_INFO][-1] device tree data: adc_min = 0 adc_max = 552 code = 226 type = 0 |
| <6>[ 1.345855] [1: swapper/0: 1] [c1] [SPRD_HEADSET_INFO][-1] device tree data: adc_min = 553 adc_max = 740 code = 582 type = 0 |
| <6>[ 1.345855] [1: swapper/0: 1] [c1] [SPRD_HEADSET_INFO][-1] device tree data: adc_min = 741 adc_max = 1215 code = 115 type = 0 |
| <6>[ 1.345886] [1: swapper/0: 1] [c1] [SPRD_HEADSET_INFO][-1] device tree data: adc_min = 1216 adc_max = 2631 code = 114 type = 0 |
| <6>[ 1.345916] [1: swapper/0: 1] [c1] [SPRD_HEADSET_INFO][-1] ddie_chip_id=0x8730C001 |
| <6>[ 1.345947] [1: swapper/0: 1] [c1] [SPRD_HEADSET_INFO][-1] adie_chip_id=0x2723A000 |
| <6>[ 1.345947] [1: swapper/0: 1] [c1] [SPRD_HEADSET_INFO][2723] adie chip is 2723, type = 2723 |
| <6>[ 1.346099] [1: swapper/0: 1] [c1] [ASoC:POWER] HEADMICBIAS Set Voltage 950000--950000 |
| <6>[ 1.346191] [1: swapper/0: 1] [c1] [SPRD_HEADSET_INFO][2723] ====================== SPRD HEADSET DETECT v2 ====================== |
| <6>[ 1.346221] [1: swapper/0: 1] [c1] [SPRD_HEADSET_INFO][2723] write 0~3 to "/sys/kernel/headset/debug_level" for headset debug |
| <6>[ 1.346221] [1: swapper/0: 1] [c1] [SPRD_HEADSET_INFO][2723] ==================================================================== |
| <6>[ 1.346252] [1: swapper/0: 1] [c1] [SPRD_HEADSET_INFO][2723] use GPIO_237 for insert detecting |
| <6>[ 1.346252] [1: swapper/0: 1] [c1] [SPRD_HEADSET_INFO][2723] automatic type switch is unsupported |
| <6>[ 1.346496] [1: swapper/0: 1] [c1] input: headset-keyboard as /devices/virtual/input/input3 |
| <4>[ 1.346862] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <4>[ 1.346923] [1: kworker/u8:0: 6] [c1] sdhost sdio_wifi there is no signal voltage! |
| <6>[ 1.347503] [1: swapper/0: 1] [c1] [SPRD_HEADSET_INFO][2723] ADPGAR_BYP_SELECT is enabled! |
| <6>[ 1.347595] I[0: swapper/0: 0] [c0] [SPRD_HEADSET_INFO][2723] headset_button_irq_handler: button is invalid!!! IRQ_400(GPIO_239) = 0, ANA_STS0 = 0x00001000 |
| <3>[ 1.347625] I[0: swapper/0: 0] [c0] This phone board headset button circuit has bug, please fix the hardware |
| <6>[ 1.347686] [1: swapper/0: 1] [c1] [SPRD_HEADSET_INFO][2723] headset_debug_sysfs_init success |
| <6>[ 1.347686] [1: swapper/0: 1] [c1] [SPRD_HEADSET_INFO][2723] to get calibration data from efuse ... |
| <6>[ 1.347808] [1: swapper/0: 1] [c1] [SPRD_HEADSET_INFO][2723] test[0] 0x7e 126, test[1] 0x81 129, test[2] 0x84 132 |
| <6>[ 1.347839] [1: swapper/0: 1] [c1] [SPRD_HEADSET_INFO][2723] block_7 0x0000004e |
| <6>[ 1.347869] [1: swapper/0: 1] [c1] [SPRD_HEADSET_INFO][2723] block 0 bit 7 set 0 have efuse data |
| <6>[ 1.347869] [1: swapper/0: 1] [c1] [SPRD_HEADSET_INFO][2723] test[0] 126, test[1] 129, test[2] 132 |
| <6>[ 1.347900] [1: swapper/0: 1] [c1] [SPRD_HEADSET_INFO][2723] adc_cal_headset.A 320, adc_cal_headset.B 3280, adc_cal_headset.E 2764 |
| <6>[ 1.347991] [1: swapper/0: 1] [c1] [SPRD_HEADSET_INFO][2723] headset_detect_probe success |
| <6>[ 1.348205] [1: swapper/0: 1] [c1] sprd_rtc 40038080.rtc: setting system clock to 2017-09-12 23:50:00 UTC (1505260200) |
| <6>[ 1.348388] [1: swapper/0: 1] [c1] sec_bat_parse_dt: Vendor is Empty |
| <6>[ 1.348602] [1: swapper/0: 1] [c1] sec_bat_parse_dt : chg_temp_check is Empty |
| <6>[ 1.348602] [1: swapper/0: 1] [c1] sec_bat_parse_dt : inbat_voltage is Empty |
| <6>[ 1.349029] [1: swapper/0: 1] [c1] sec_bat_parse_dt : Temp highlimit threshold event is Empty |
| <6>[ 1.349060] [1: swapper/0: 1] [c1] sec_bat_parse_dt : Temp highlimit recovery event is Empty |
| <6>[ 1.349090] [1: swapper/0: 1] [c1] sec_bat_parse_dt : Temp highlimit threshold normal is Empty |
| <6>[ 1.349090] [1: swapper/0: 1] [c1] sec_bat_parse_dt : Temp highlimit recovery normal is Empty |
| <6>[ 1.349121] [1: swapper/0: 1] [c1] sec_bat_parse_dt : Temp highlimit threshold lpm is Empty |
| <6>[ 1.349151] [1: swapper/0: 1] [c1] sec_bat_parse_dt : Temp highlimit recovery lpm is Empty |
| <6>[ 1.349182] [1: swapper/0: 1] [c1] sec_bat_parse_dt : HIGHLIMIT_THRESHOLD_EVENT(-200), HIGHLIMIT_RECOVERY_EVENT(-200) |
| <6>[ 1.349182] [1: swapper/0: 1] HIGH_THRESHOLD_EVENT(600), HIGH_RECOVERY_EVENT(460) LOW_THRESHOLD_EVENT(-50), LOW_RECOVERY_EVENT(0) |
| <6>[ 1.349182] [1: swapper/0: 1] HIGHLIMIT_THRESHOLD_NOLMAL(0), HIGHLIMIT_RECOVERY_NORMAL(0) |
| <6>[ 1.349182] [1: swapper/0: 1] HIGH_THRESHOLD_NORMAL(600), HIGH_RECOVERY_NORMAL(460) LOW_THRESHOLD_NORMAL(-50), LOW_RECOVERY_NORMAL(0) |
| <6>[ 1.349182] [1: swapper/0: 1] HIGHLIMIT_THRESHOLD_LPM(0), HIGHLIMIT_RECOVERY_LPM(0) |
| <6>[ 1.349182] [1: swapper/0: 1] HIGH_THRESHOLD_LPM(600), HIGH_RECOVERY_LPM(460) LOW_THRESHOLD_LPM(-50), LOW_RECOVERY_LPM(0) |
| <6>[ 1.350463] [1: swapper/0: 1] [c1] sec-battery sec-battery.27: sec_bat_set_property: current_cable(4), wc_status(0), wire_status(4) |
| <6>[ 1.350524] [1: swapper/0: 1] [c1] sec-battery sec-battery.27: sec_battery_probe: SEC Battery Driver Monitorwork |
| <6>[ 1.350524] [2: kworker/u8:0: 6] [c2] sec-battery sec-battery.27: sec_bat_cable_work: Start |
| <6>[ 1.350555] [2: kworker/u8:0: 6] [c2] sec_chg_set_property : STATUS OF CHARGER ON(0)/OFF(1): 0 |
| <6>[ 1.350555] [1: swapper/0: 1] [c1] sec-battery sec-battery.27: sec_battery_probe: SEC Battery Driver Loaded |
| <6>[ 1.350585] [2: kworker/u8:0: 6] [c2] sec_chg_set_property : float voltage (4350mV) |
| <6>[ 1.353271] [2: kworker/u8:0: 6] [c2] SM5701_set_batreg_voltage : SM5701_CHGCNTL3 (Battery regulation voltage) : 0x1b |
| <6>[ 1.353302] [2: kworker/u8:0: 6] [c2] sec_chg_set_property : vbus current limit (460mA) |
| <6>[ 1.355163] [2: kworker/u8:0: 6] [c2] SM5701_set_vbuslimit_current : SM5701_soft start (Input current limit) : 0x10 |
| <6>[ 1.355590] [1: swapper/0: 1] [c1] [ASoC:CDCV4] ana_chip_id is 0xc0575100 |
| <4>[ 1.356018] [1: swapper/0: 1] [c1] dhd_module_init in |
| <4>[ 1.356079] [1: swapper/0: 1] [c1] found wifi platform device bcmdhd_wlan |
| <4>[ 1.356231] [1: swapper/0: 1] [c1] Power-up adapter 'DHD generic adapter' |
| <4>[ 1.356262] [1: swapper/0: 1] [c1] wifi_platform_set_power = 1 |
| <6>[ 1.356292] [1: swapper/0: 1] [c1] wlan_device_power:1 |
| <4>[ 1.356323] [1: swapper/0: 1] [c1] sdhost sdio_wifi there is no signal voltage! |
| <4>[ 1.356353] [1: swapper/0: 1] [c1] sdhost sdio_wifi There is no signalling voltage |
| <4>[ 1.374511] [3: swapper/0: 1] [c3] sdhost sdio_wifi there is no signal voltage! |
| <4>[ 1.604614] [3: swapper/0: 1] [c3] wifi_platform_bus_enumerate device present 1 |
| <6>[ 1.604614] [3: swapper/0: 1] [c3] wlan_device_set_carddetect: 1 |
| <4>[ 1.606201] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <4>[ 1.607788] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <4>[ 1.613128] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <4>[ 1.618469] [0: kworker/u8:2: 123] [c0] sdhost sdio_wifi There is no signalling voltage |
| <4>[ 1.618469] [0: kworker/u8:2: 123] [c0] sdhost sdio_wifi there is no signal voltage! |
| <4>[ 1.619506] [0: kworker/u8:2: 123] [c0] sdhost sdio_wifi there is no signal voltage! |
| <4>[ 1.619537] [0: kworker/u8:2: 123] [c0] sdhost sdio_wifi There is no signalling voltage |
| <4>[ 1.634613] [0: kworker/u8:2: 123] [c0] sdhost sdio_wifi there is no signal voltage! |
| <4>[ 1.654968] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <4>[ 1.655426] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <4>[ 1.659149] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000 |
| <6>[ 1.672851] [0: kworker/u8:2: 123] [c0] mmc2: new high speed SDIO card at address 0001 |
| <4>[ 1.689849] [0: swapper/0: 1] [c0] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter |
| <4>[ 1.689941] [0: swapper/0: 1] [c0] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter |
| <4>[ 1.689941] [0: swapper/0: 1] [c0] bus num (host idx)=2, slot num (rca)=1 |
| <4>[ 1.689971] [0: swapper/0: 1] [c0] found adapter info 'DHD generic adapter' |
| <4>[ 1.690032] [0: swapper/0: 1] [c0] alloc static buf at ed900000! |
| <4>[ 1.692749] [0: swapper/0: 1] [c0] F1 signature OK, socitype:0x1 chip:0xa9a6 rev:0x1 pkg:0x4 |
| <4>[ 1.693603] [0: swapper/0: 1] [c0] DHD: dongle ram size is set to 524288(orig 524288) at 0x0 |
| <4>[ 1.694458] [1: swapper/0: 1] [c1] wl_create_event_handler(): thread:wl_event_handler:84 started |
| <6>[ 1.694488] [0:wl_event_handle: 132] [c0] CFG80211-INFO2) wl_event_handler : tsk Enter, tsk = 0xedfca680 |
| <4>[ 1.695129] [1: swapper/0: 1] [c1] p2p0: P2P Interface Registered |
| <4>[ 1.695373] [1: swapper/0: 1] [c1] dhd_attach(): thread:dhd_watchdog_thread:85 started |
| <4>[ 1.695617] [1: swapper/0: 1] [c1] dhd_attach(): thread:dhd_dpc:86 started |
| <4>[ 1.695861] [1: swapper/0: 1] [c1] dhd_attach(): thread:dhd_rxf:87 started |
| <6>[ 1.695892] [1: swapper/0: 1] [c1] *** register_pm_notifier, nb->notifier_call:dhd_pm_callback *** |
| <4>[ 1.695922] [1: swapper/0: 1] [c1] dhd_deferred_work_init: work queue initialized |
| <4>[ 1.696197] [0: swapper/0: 1] [c0] Dongle Host Driver, version 1.141.64.32 (security_patch) |
| <4>[ 1.696197] [0: swapper/0: 1] Compiled in drivers/net/wireless/bcmdhd on May 31 2016 at 14:52:24 |
| <4>[ 1.696685] [0: swapper/0: 1] [c0] Register interface [wlan0] MAC: 00:73:2a |
| <4>[ 1.696685] [0: swapper/0: 1] |
| <6>[ 1.696807] [1:wl_event_handle: 132] [c1] CFG80211-INFO2) wl_event_handler : was terminated |
| <4>[ 1.696838] [0: swapper/0: 1] [c0] wl_destroy_event_handler(): thread:wl_event_handler:84 terminated OK |
| <4>[ 1.696868] [0: swapper/0: 1] [c0] dhd_prot_ioctl : bus is down. we have nothing to do |
| <4>[ 1.696868] [0: swapper/0: 1] [c0] dhd_wl_ioctl: WLC_IOCTL: cmd: 3, ret = -1 |
| <4>[ 1.696990] [0: swapper/0: 1] [c0] wifi_platform_set_power = 0 |
| <6>[ 1.697021] [0: swapper/0: 1] [c0] wlan_device_power:0 |
| <4>[ 1.697021] [0: swapper/0: 1] [c0] sdhost sdio_wifi there is no signal voltage! |
| <6>[ 1.706298] [2: kworker/u8:0: 6] [c2] SM5701_set_vbuslimit_current : SM5701_VBUSCNTL (Input current limit) : 0x11 |
| <6>[ 1.706329] [2: kworker/u8:0: 6] [c2] sec_chg_set_property : topoff current (200mA) |
| <6>[ 1.708984] [2: kworker/u8:0: 6] [c2] SM5701_set_topoff : SM5701_CHGCNTL1 (Top-off current threshold) : 0x04 |
| <6>[ 1.708984] [2: kworker/u8:0: 6] [c2] sec_chg_set_property : fast charging current (975mA), siop_level=100 |
| <6>[ 1.710662] [2: kworker/u8:0: 6] [c2] SM5701_set_fastchg_current : SM5701_CHGCNTL2 (fastchg current) : 0x23 |
| <6>[ 1.712371] [2: kworker/u8:0: 6] [c2] SM5701_toggle_charger: SM5701 Charger toggled!! |
| <6>[ 1.713317] [2: kworker/u8:0: 6] [c2] SM5701_toggle_charger : CNTL register (0x09) : 0xe4 |
| <6>[ 1.713348] [2: kworker/u8:0: 6] [c2] sec-battery sec-battery.27: sec_bat_cable_work: Status:Charging, Sleep:No, Charging:Yes, Short Poll:Yes |
| <6>[ 1.713378] [2: kworker/u8:0: 6] [c2] sec-battery sec-battery.27: sec_bat_cable_work: Polling time is reset to 30 sec. |
| <6>[ 1.713409] [2: kworker/u8:0: 6] [c2] sec_hal_fg_get_property-13,val->intval = 3931 |
| <6>[ 1.713439] [2: kworker/u8:0: 6] [c2] sec_hal_fg_get_property-14,val->intval = 3931 |
| <6>[ 1.713470] [2: kworker/u8:0: 6] [c2] sprdfgu: rint:700,value.intval:0 |
| <6>[ 1.713500] [2: kworker/u8:0: 6] [c2] sec_hal_fg_get_property-14,val->intval = 3909 |
| <6>[ 1.713531] [2: kworker/u8:0: 6] [c2] sec_hal_fg_get_property-19,val->intval = 32 |
| <6>[ 1.713562] [2: kworker/u8:0: 6] [c2] sec_hal_fg_get_property-20,val->intval = 32 |
| <6>[ 1.713684] [2: kworker/u8:0: 6] [c2] read channel [1507] |
| <6>[ 1.713775] [2: kworker/u8:0: 6] [c2] read channel [1509] |
| <6>[ 1.713867] [2: kworker/u8:0: 6] [c2] read channel [1508] |
| <6>[ 1.713989] [2: kworker/u8:0: 6] [c2] read channel [1509] |
| <6>[ 1.714080] [2: kworker/u8:0: 6] [c2] read channel [1508] |
| <6>[ 1.714111] [2: kworker/u8:0: 6] [c2] sec-battery sec-battery.27: sec_bat_get_temperature_by_adc: Temp(257), Temp-ADC(1508) |
| <6>[ 1.714202] [2: kworker/u8:0: 6] [c2] read channel [1510] |
| <6>[ 1.714294] [2: kworker/u8:0: 6] [c2] read channel [1508] |
| <6>[ 1.714385] [2: kworker/u8:0: 6] [c2] read channel [1508] |
| <6>[ 1.714538] [2: kworker/u8:0: 6] [c2] read channel [1508] |
| <6>[ 1.714630] [2: kworker/u8:0: 6] [c2] read channel [1508] |
| <6>[ 1.714660] [2: kworker/u8:0: 6] [c2] sec-battery sec-battery.27: sec_bat_get_temperature_by_adc: Temp(257), Temp-ADC(1508) |
| <6>[ 1.714691] [2: kworker/u8:0: 6] [c2] sprdfgu: sprdfgu_read_soc delta 0mAh,sprdfgu_data.init_clbcnt:32683622 |
| <6>[ 1.714691] [2: kworker/u8:0: 6] [c2] sprdfgu: sprdfgu_read_soc delta capacity 0,full capacity 2600 |
| <6>[ 1.714721] [2: kworker/u8:0: 6] [c2] sprdfgu: sprdfgu_read_soc soc 64,sprdfgu_data.init_cap 64 |
| <6>[ 1.714752] [2: kworker/u8:0: 6] [c2] sprdfgu: rint:200,value.intval:257 |
| <6>[ 1.715728] [2: kworker/u8:0: 6] [c2] SM5701_get_charging_status : SM5701_STATUS2 : 0x08 |
| <6>[ 1.717681] [2: kworker/u8:0: 6] [c2] sprdfgu: cnom_temp 2600, delta_soc 0,comp_soc64,soc 64,temp 25 |
| <6>[ 1.717712] [2: kworker/u8:0: 6] [c2] fgu_capacity: = 64,flush_time: = 1,period_time:=1 |
| <6>[ 1.717742] [2: kworker/u8:0: 6] [c2] sec_hal_fg_get_property-45,val->intval = 640 |
| <6>[ 1.717773] [2: kworker/u8:0: 6] [c2] sec-battery sec-battery.27: sec_bat_get_battery_info:Vnow(3931mV),Inow(32mA),Imax(460mA),SOC(64%),Tbat(257),Tchg(0),is_hc_usb(0) |
| <6>[ 1.718749] [2: kworker/u8:0: 6] [c2] SM5701_get_battery_present: SM5701_STATUS1 (0x24) |
| <6>[ 1.718749] [2: kworker/u8:0: 6] [c2] sec-battery sec-battery.27: sec_bat_battery_cable_check: Battery Connected |
| <6>[ 1.718780] [2: kworker/u8:0: 6] [c2] sec-battery sec-battery.27: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), level(100%) |
| <6>[ 1.805603] [0: swapper/0: 1] [c0] i2s-null-codec sound.41: null-codec-dai <-> i2s_bt_sco0 mapping ok |
| <6>[ 1.806060] [0: swapper/0: 1] [c0] i2s-null-codec sound.41: null-codec-dai <-> i2s_bt_sco1 mapping ok |
| <6>[ 1.806518] [0: swapper/0: 1] [c0] i2s-null-codec sound.41: null-codec-dai <-> i2s_bt_sco2 mapping ok |
| <6>[ 1.807006] [0: swapper/0: 1] [c0] i2s-null-codec sound.41: null-codec-dai <-> i2s_bt_sco3 mapping ok |
| <6>[ 1.812225] [0: swapper/0: 1] [c0] vbc-r2p0-sprd-codec sound.39: sprd-codec-i2s <-> vbc-r2p0 mapping ok |
| <6>[ 1.812591] [0: swapper/0: 1] [c0] vbc-r2p0-sprd-codec sound.39: sprd-codec-vaudio <-> vaudio mapping ok |
| <6>[ 1.813140] [0: swapper/0: 1] [c0] vbc-r2p0-sprd-codec sound.39: codec-i2s-ext <-> vbc-r2p0-ad23 mapping ok |
| <6>[ 1.813507] [0: swapper/0: 1] [c0] vbc-r2p0-sprd-codec sound.39: codec-vaudio-ext <-> vaudio-ad23 mapping ok |
| <6>[ 1.813964] [0: swapper/0: 1] [c0] vbc-r2p0-sprd-codec sound.39: sprd-codec-fm <-> vbc-dfm mapping ok |
| <6>[ 1.815917] [0: swapper/0: 1] [c0] ALSA device list: |
| <6>[ 1.815948] [0: swapper/0: 1] [c0] #0: all-i2s |
| <6>[ 1.815948] [0: swapper/0: 1] [c0] #1: sprdphone |
| <3>[ 1.816131] [0: swapper/0: 1] [c0] Warning: unable to open an initial console. |
| <6>[ 1.816162] [0: swapper/0: 1] [c0] [secgpio_dvs][check_gpio_status] state : init |
| <6>[ 1.816192] [0: swapper/0: 1] [c0] |
| <6>[ 1.816223] [0: swapper/0: 1] <6>[ 1.816833] [0: swapper/0: 1] Freeing unused kernel memory: 456K (c0ac6000 - c0b38000) |
| <4>[ 1.818695] [1: init: 1] [c1] !@Boot: start init process |
| <4>[ 1.819305] [1: init: 1] [c1] |
| <4>[ 1.819305] [1: init: 1] SIM_SLOT_PIN gpio 217 : Single Sim mode |
| <7>[ 1.826141] [1: init: 1] [c1] SELinux: 2048 avtab hash slots, 18903 rules. |
| <7>[ 1.836212] [1: init: 1] [c1] SELinux: 2048 avtab hash slots, 18903 rules. |
| <7>[ 1.836273] [1: init: 1] [c1] SELinux: 1 users, 2 roles, 1544 types, 0 bools, 1 sens, 1024 cats |
| <7>[ 1.836303] [1: init: 1] [c1] SELinux: 86 classes, 18903 rules |
| <7>[ 1.840942] [1: init: 1] [c1] SELinux: Completing initialization. |
| <7>[ 1.840972] [1: init: 1] [c1] SELinux: Setting up existing superblocks. |
| <7>[ 1.841003] [1: init: 1] [c1] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts |
| <7>[ 1.841033] [1: init: 1] [c1] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts |
| <7>[ 1.841125] [1: init: 1] [c1] SELinux: initialized (dev bdev, type bdev), not configured for labeling |
| <7>[ 1.841156] [1: init: 1] [c1] SELinux: initialized (dev proc, type proc), uses genfs_contexts |
| <7>[ 1.841186] [1: init: 1] [c1] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs |
| <7>[ 1.841247] [1: init: 1] [c1] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts |
| <7>[ 1.845428] [1: init: 1] [c1] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs |
| <7>[ 1.845458] [1: init: 1] [c1] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs |
| <7>[ 1.845489] [1: init: 1] [c1] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts |
| <7>[ 1.845520] [1: init: 1] [c1] SELinux: initialized (dev devpts, type devpts), uses transition SIDs |
| <7>[ 1.845550] [1: init: 1] [c1] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts |
| <7>[ 1.845642] [1: init: 1] [c1] SELinux: initialized (dev configfs, type configfs), not configured for labeling |
| <7>[ 1.845672] [1: init: 1] [c1] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs |
| <7>[ 1.845703] [1: init: 1] [c1] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts |
| <4>[ 2.050598] [1: init: 1] [c1] SELinux: Loaded policy from /sepolicy |
| <4>[ 2.236358] I[0: swapper/0: 0] [c0] RTC ***** interrupt happen |
| <3>[ 2.314544] [2: saudio-2-10: 109] [c2] saudio_wait_monitor_cmd error -5 |
| <3>[ 2.314605] [0: saudio-2-14: 111] [c0] saudio_wait_monitor_cmd error -5 |
| <6>[ 2.314605] [2: saudio-2-10: 109] [c2] saudio_ctrl_thread,saudio: modem boot and handshake ok,dst 2, channel 10 |
| <6>[ 2.314636] [2: saudio-2-10: 109] [c2] saudio:saudio_snd_card free in dst 2,channel 10 |
| <6>[ 2.314666] [2: saudio-2-10: 109] [c2] saudio:saudio_snd_card free out 0 ,dst 2, channel 10 |
| <6>[ 2.314666] [0: saudio-2-14: 111] [c0] saudio_ctrl_thread,saudio: modem boot and handshake ok,dst 2, channel 14 |
| <6>[ 2.314697] [0: saudio-2-14: 111] [c0] saudio:saudio_snd_card free in dst 2,channel 14 |
| <6>[ 2.314697] [0: saudio-2-14: 111] [c0] saudio:saudio_snd_card free out 0 ,dst 2, channel 14 |
| <6>[ 2.314727] [0: saudio-2-14: 111] [c0] saudio_ctrl_thread flush work queue in dst 2, channel 14 |
| <6>[ 2.314758] [2: saudio-2-10: 109] [c2] saudio_ctrl_thread flush work queue in dst 2, channel 10 |
| <6>[ 2.314758] [3: kworker/u8:0: 6] [c3] saudio: card free handler in |
| <6>[ 2.314758] [1: kworker/u8:3: 131] [c1] saudio: card free handler in |
| <6>[ 2.314788] [3: kworker/u8:0: 6] [c3] saudio: card free handler out |
| <6>[ 2.314788] [1: kworker/u8:3: 131] [c1] saudio: card free handler out |
| <6>[ 2.314819] [2: saudio-2-10: 109] [c2] saudio_ctrl_thread flush work queue out,dst 2, channel 10 |
| <6>[ 2.314849] [0: saudio-2-14: 111] saudio_ctrl_thread flush work queue out,dst 2, channel 14 |
| <6>[ 2.314849] [0: saudio-2-14: 111] [c2] saudio.c:saudio_snd_notify_mdem_clear in |
| <6>[ 2.316009] [2: saudio-2-10: 109] [c0] saudio.c:saudio_snd_notify_mdem_clear in |
| <6>[ 2.316223] [3: saudio-2-14: 111] saudio.c:saudio_snd_notify_mdem_clear out |
| <6>[ 2.316619] [2: saudio-2-10: 109] saudio.c:snd_card create ok |
| <6>[ 2.316619] [2: saudio-2-10: 109] [c2] saudio: snd card init reulst 0, dst 2, channel 10 |
| <6>[ 2.316650] [2: saudio-2-10: 109] [c2] saudio_ctrl_thread,saudio: waiting for modem boot handshake,dst 2,channel 10 |
| <6>[ 2.317016] [3: saudio-2-14: 111] saudio.c:saudio_snd_notify_mdem_clear out |
| <6>[ 2.317016] [3: saudio-2-14: 111] [c3] saudio.c:snd_card create ok |
| <6>[ 2.317047] [3: saudio-2-14: 111] [c3] saudio: snd card init reulst 0, dst 2, channel 14 |
| <6>[ 2.317077] [3: saudio-2-14: 111] [c3] saudio_ctrl_thread,saudio: waiting for modem boot handshake,dst 2,channel 14 |
| <3>[ 2.535308] [1: init: 1] [c1] init: /init.rc: 310: invalid command '/*' |
| <3>[ 2.536224] [1: init: 1] [c1] init: /init.rc: 851: setprop requires 2 arguments |
| <3>[ 2.536621] [1: init: 1] [c1] init: /init.sc8830.rc: 15: invalid command 'pipe' |
| <3>[ 2.536682] [1: init: 1] [c1] init: /init.sc8830.rc: 16: invalid command 'pipe' |
| <3>[ 2.536682] [1: init: 1] [c1] init: /init.sc8830.rc: 17: invalid command 'pipe' |
| <3>[ 2.536834] [1: init: 1] [c1] init: /init.sc8830.rc: 114: invalid command 'pipe' |
| <3>[ 2.537811] [1: init: 1] [c1] init: /init.sc8830.rc: 619: invalid option 'chmod' |
| <3>[ 2.537841] [1: init: 1] [c1] init: /init.sc8830.rc: 620: invalid option 'chmod' |
| <3>[ 2.537872] [1: init: 1] [c1] init: /init.sc8830.rc: 621: invalid option 'chmod' |
| <3>[ 2.537902] [1: init: 1] [c1] init: /init.sc8830.rc: 622: invalid option 'chmod' |
| <3>[ 2.537933] [1: init: 1] [c1] init: /init.sc8830.rc: 623: invalid option 'chmod' |
| <3>[ 2.537933] [1: init: 1] [c1] init: /init.sc8830.rc: 624: invalid option 'chmod' |
| <3>[ 2.537963] [1: init: 1] [c1] init: /init.sc8830.rc: 625: invalid option 'chmod' |
| <3>[ 2.537994] [1: init: 1] [c1] init: /init.sc8830.rc: 626: invalid option 'chmod' |
| <3>[ 2.538055] [1: init: 1] [c1] init: /init.sc8830.rc: 640: ignored duplicate definition of service 'smd_symlink' |
| <3>[ 2.538391] [1: init: 1] [c1] init: /init.board.rc: 139: ignored duplicate definition of service 'wcnd' |
| <3>[ 2.539459] [1: init: 1] [c1] init: /init.grandprimeve3g_base.rc: 396: ignored duplicate definition of service 'drm' |
| <3>[ 2.539611] [1: init: 1] [c1] init: /init.grandprimeve3g_base.rc: 474: ignored duplicate definition of service 'sdcard' |
| <3>[ 2.539672] [1: init: 1] [c1] init: /init.grandprimeve3g_base.rc: 478: ignored duplicate definition of service 'fuse_extSdCard' |
| <3>[ 2.539703] [1: init: 1] [c1] init: /init.grandprimeve3g_base.rc: 483: ignored duplicate definition of service 'fuse_UsbDriveA' |
| <3>[ 2.539733] [1: init: 1] [c1] init: /init.grandprimeve3g_base.rc: 488: ignored duplicate definition of service 'fuse_UsbDriveB' |
| <3>[ 2.539764] [1: init: 1] [c1] init: /init.grandprimeve3g_base.rc: 493: ignored duplicate definition of service 'fuse_UsbDriveC' |
| <3>[ 2.539825] [1: init: 1] [c1] init: /init.grandprimeve3g_base.rc: 498: ignored duplicate definition of service 'fuse_UsbDriveD' |
| <3>[ 2.539855] [1: init: 1] [c1] init: /init.grandprimeve3g_base.rc: 503: ignored duplicate definition of service 'fuse_UsbDriveE' |
| <3>[ 2.539886] [1: init: 1] [c1] init: /init.grandprimeve3g_base.rc: 508: ignored duplicate definition of service 'fuse_UsbDriveF' |
| <3>[ 2.540039] [1: init: 1] [c1] init: could not import file 'init.fac.rc' from '/init.grandprimeve3g_base.rc' |
| <6>[ 2.719085] [2: kworker/u8:3: 131] [c2] sec_hal_fg_get_property-13,val->intval = 3976 |
| <6>[ 2.719116] [2: kworker/u8:3: 131] [c2] sec_hal_fg_get_property-14,val->intval = 3976 |
| <6>[ 2.719146] [2: kworker/u8:3: 131] [c2] sprdfgu: rint:200,value.intval:257 |
| <6>[ 2.719207] [2: kworker/u8:3: 131] [c2] sec_hal_fg_get_property-14,val->intval = 3922 |
| <6>[ 2.719238] [2: kworker/u8:3: 131] [c2] sec_hal_fg_get_property-19,val->intval = 271 |
| <6>[ 2.719238] [2: kworker/u8:3: 131] [c2] sec_hal_fg_get_property-20,val->intval = 271 |
| <6>[ 2.719360] [2: kworker/u8:3: 131] [c2] read channel [1509] |
| <6>[ 2.719451] [2: kworker/u8:3: 131] [c2] read channel [1508] |
| <6>[ 2.719573] [2: kworker/u8:3: 131] [c2] read channel [1508] |
| <6>[ 2.719665] [2: kworker/u8:3: 131] [c2] read channel [1508] |
| <6>[ 2.719757] [2: kworker/u8:3: 131] [c2] read channel [1509] |
| <6>[ 2.719787] [2: kworker/u8:3: 131] [c2] sec-battery sec-battery.27: sec_bat_get_temperature_by_adc: Temp(257), Temp-ADC(1508) |
| <6>[ 2.719879] [2: kworker/u8:3: 131] [c2] read channel [1508] |
| <6>[ 2.720001] [2: kworker/u8:3: 131] [c2] read channel [1508] |
| <6>[ 2.720092] [2: kworker/u8:3: 131] [c2] read channel [1509] |
| <6>[ 2.720184] [2: kworker/u8:3: 131] [c2] read channel [1508] |
| <6>[ 2.720306] [2: kworker/u8:3: 131] [c2] read channel [1508] |
| <6>[ 2.720306] [2: kworker/u8:3: 131] [c2] sec-battery sec-battery.27: sec_bat_get_temperature_by_adc: Temp(257), Temp-ADC(1508) |
| <6>[ 2.720336] [2: kworker/u8:3: 131] [c2] sprdfgu: sprdfgu_read_soc delta 0mAh,sprdfgu_data.init_clbcnt:32683622 |
| <6>[ 2.720367] [2: kworker/u8:3: 131] [c2] sprdfgu: sprdfgu_read_soc delta capacity 0,full capacity 2600 |
| <6>[ 2.720397] [2: kworker/u8:3: 131] [c2] sprdfgu: sprdfgu_read_soc soc 64,sprdfgu_data.init_cap 64 |
| <6>[ 2.720397] [2: kworker/u8:3: 131] [c2] sprdfgu: rint:200,value.intval:257 |
| <6>[ 2.721435] [2: kworker/u8:3: 131] [c2] SM5701_get_charging_status : SM5701_STATUS2 : 0x08 |
| <6>[ 2.723388] [2: kworker/u8:3: 131] [c2] sprdfgu: cnom_temp 2600, delta_soc 0,comp_soc64,soc 64,temp 25 |
| <6>[ 2.723419] [2: kworker/u8:3: 131] [c2] fgu_capacity: = 64,flush_time: = 2,period_time:=1 |
| <6>[ 2.723449] [2: kworker/u8:3: 131] [c2] sec_hal_fg_get_property-45,val->intval = 640 |
| <6>[ 2.723480] [2: kworker/u8:3: 131] [c2] sec-battery sec-battery.27: sec_bat_get_battery_info:Vnow(3976mV),Inow(271mA),Imax(460mA),SOC(64%),Tbat(257),Tchg(0),is_hc_usb(0) |
| <6>[ 2.724456] [2: kworker/u8:3: 131] [c2] SM5701_get_battery_present: SM5701_STATUS1 (0x24) |
| <6>[ 2.724517] [2: kworker/u8:3: 131] [c2] sec-battery sec-battery.27: sec_bat_battery_cable_check: Battery Connected |
| <6>[ 2.724548] [2: kworker/u8:3: 131] [c2] sec-battery sec-battery.27: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), level(100%) |
| <3>[ 2.840881] [3: ueventd: 137] [c3] power_supply sec-fuelgauge: driver failed to report `status' property: -22 |
| <6>[ 3.186706] [3: ueventd: 137] [c3] SM5701_get_charging_status : SM5701_STATUS2 : 0x08 |
| <6>[ 3.191528] [3: ueventd: 137] [c3] SM5701_get_charging_health : Health, SM5701_STATUS1 : 0x24 |
| <6>[ 3.192504] [3: ueventd: 137] [c3] SM5701_get_battery_present: SM5701_STATUS1 (0x24) |
| <3>[ 3.193481] [3: ueventd: 137] [c3] power_supply sec-charger: driver failed to report `charge_otg_control' property: -22 |
| <3>[ 3.207611] [1: init: 1] [c1] init: /dev/hw_random not found |
| <7>[ 3.211700] [1: init: 1] [c1] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts |
| <7>[ 3.212432] [1: init: 1] [c1] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs |
| <7>[ 3.213165] [1: init: 1] [c1] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts |
| <7>[ 3.216186] [1: init: 1] [c1] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs |
| <7>[ 3.217956] [1: init: 1] [c1] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs |
| <7>[ 3.218658] [1: init: 1] [c1] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs |
| <7>[ 3.221435] [1: init: 1] [c1] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts |
| <3>[ 3.227111] [1: init: 1] [c1] init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead |
| <3>[ 3.230834] [1: init: 1] [c1] init: /dev/hw_random not found |
| <4>[ 3.236358] I[0: swapper/0: 0] [c0] RTC ***** interrupt happen |
| <6>[ 3.239105] [2: init: 139] [c2] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts: errors=panic |
| <7>[ 3.239135] [2: init: 139] [c2] SELinux: initialized (dev mmcblk0p25, type ext4), uses xattr |
| <6>[ 3.239410] [2: init: 139] [c2] fs_mgr: __mount(source=/dev/block/platform/sdio_emmc/by-name/SYSTEM,target=/system,type=ext4)=0 |
| <4>[ 3.240478] [2: init: 139] [c2] CryptfsFSCK: Decryption operation succeededfs_mgr: Running /system/bin/e2fsck on /dev/block/platform/sdio_emmc/by-name/userdata |
| <6>[ 3.313995] [2: init: 139] [c2] e2fsck: e2fsck 1.42.9 (28-Dec-2013) |
| <6>[ 3.314086] [2: init: 139] [c2] e2fsck: skipping journal recoverybecause INCOMPAT_RECOVER was clear. |
| <6>[ 3.314117] [2: init: 139] [c2] e2fsck: check whether gdt & bitmap free count is vaild |
| <6>[ 3.314147] [2: init: 139] [c2] e2fsck: /dev/block/platform/sdio_emmc/by-name/userdata: clean, 2257/348128 files, 226066/1390588 blocks |
| <6>[ 3.314147] [2: init: 139] [c2] e2fsck: ext2fs_close2 : normal operation, return 0 |
| <6>[ 3.319152] [2: init: 139] [c2] EXT4-fs (mmcblk0p27): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,journal_async_commit,errors=panic |
| <7>[ 3.319213] [2: init: 139] [c2] SELinux: initialized (dev mmcblk0p27, type ext4), uses xattr |
| <6>[ 3.319335] [2: init: 139] [c2] fs_mgr: __mount(source=/dev/block/platform/sdio_emmc/by-name/userdata,target=/data,type=ext4)=0 |
| <6>[ 3.319580] [2: init: 139] [c2] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/sdio_emmc/by-name/CACHE |
| <6>[ 3.333496] [2: init: 139] [c2] e2fsck: e2fsck 1.42.9 (28-Dec-2013) |
| <6>[ 3.333557] [2: init: 139] [c2] e2fsck: skipping journal recoverybecause INCOMPAT_RECOVER was clear. |
| <6>[ 3.333587] [2: init: 139] [c2] e2fsck: check whether gdt & bitmap free count is vaild |
| <6>[ 3.333618] [2: init: 139] [c2] e2fsck: /dev/block/platform/sdio_emmc/by-name/CACHE: clean, 25/12800 files, 1926/51200 blocks |
| <6>[ 3.333648] [2: init: 139] [c2] e2fsck: ext2fs_close2 : normal operation, return 0 |
| <6>[ 3.338043] [2: init: 139] [c2] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,journal_async_commit,errors=panic |
| <7>[ 3.338104] [2: init: 139] [c2] SELinux: initialized (dev mmcblk0p24, type ext4), uses xattr |
| <6>[ 3.338226] [2: init: 139] [c2] fs_mgr: __mount(source=/dev/block/platform/sdio_emmc/by-name/CACHE,target=/cache,type=ext4)=0 |
| <6>[ 3.338348] [2: init: 139] [c2] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/sdio_emmc/by-name/efs |
| <6>[ 3.350616] [2: init: 139] [c2] e2fsck: e2fsck 1.42.9 (28-Dec-2013) |
| <6>[ 3.350708] [2: init: 139] [c2] e2fsck: skipping journal recoverybecause INCOMPAT_RECOVER was clear. |
| <6>[ 3.350708] [2: init: 139] [c2] e2fsck: check whether gdt & bitmap free count is vaild |
| <6>[ 3.350738] [2: init: 139] [c2] e2fsck: /dev/block/platform/sdio_emmc/by-name/efs: clean, 50/1280 files, 1147/5120 blocks |
| <6>[ 3.350769] [2: init: 139] [c2] e2fsck: ext2fs_close2 : normal operation, return 0 |
| <6>[ 3.355255] [2: init: 139] [c2] EXT4-fs (mmcblk0p17): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,journal_async_commit,errors=panic |
| <7>[ 3.355285] [2: init: 139] [c2] SELinux: initialized (dev mmcblk0p17, type ext4), uses xattr |
| <6>[ 3.355407] [2: init: 139] [c2] fs_mgr: __mount(source=/dev/block/platform/sdio_emmc/by-name/efs,target=/efs,type=ext4)=0 |
| <6>[ 3.355529] [2: init: 139] [c2] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/sdio_emmc/by-name/prodnv |
| <6>[ 3.367584] [2: init: 139] [c2] e2fsck: e2fsck 1.42.9 (28-Dec-2013) |
| <6>[ 3.367645] [2: init: 139] [c2] e2fsck: skipping journal recoverybecause INCOMPAT_RECOVER was clear. |
| <6>[ 3.367675] [2: init: 139] [c2] e2fsck: check whether gdt & bitmap free count is vaild |
| <6>[ 3.367706] [2: init: 139] [c2] e2fsck: /dev/block/platform/sdio_emmc/by-name/prodnv: clean, 14/320 files, 1057/1280 blocks |
| <6>[ 3.367706] [2: init: 139] [c2] e2fsck: ext2fs_close2 : normal operation, return 0 |
| <6>[ 3.371246] [2: init: 139] [c2] EXT4-fs (mmcblk0p18): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,journal_async_commit,errors=panic |
| <7>[ 3.371276] [2: init: 139] [c2] SELinux: initialized (dev mmcblk0p18, type ext4), uses xattr |
| <6>[ 3.371398] [2: init: 139] [c2] fs_mgr: __mount(source=/dev/block/platform/sdio_emmc/by-name/prodnv,target=/productinfo,type=ext4)=0 |
| <7>[ 3.374298] [1: init: 1] [c1] SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts |
| <3>[ 3.376342] [1: init: 1] [c1] init: Running /dev/block/platform/sdio_emmc/by-name/persdata on ext4 |
| <4>[ 3.383728] [3: e2fsck: 155] [c3] e2fsck 1.42.9 (28-Dec-2013) |
| <4>[ 3.386810] [3: e2fsck: 155] [c3] skipping journal recoverybecause INCOMPAT_RECOVER was clear. |
| <4>[ 3.386871] [3: e2fsck: 155] [c3] check whether gdt & bitmap free count is vaild |
| <4>[ 3.387084] [3: e2fsck: 155] [c3] /dev/block/platform/sdio_emmc/by-name/persdata: clean, 21/576 files, 1122/2304 blocks |
| <4>[ 3.387603] [3: e2fsck: 155] [c3] ext2fs_close2 : normal operation, return 0 |
| <6>[ 3.392578] [1: init: 1] [c1] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: barrier=1 |
| <7>[ 3.392639] [1: init: 1] [c1] SELinux: initialized (dev mmcblk0p23, type ext4), uses xattr |
| <4>[ 3.475006] [1: init: 1] [c1] Mali<2>: Inserting Mali v600 device driver. |
| <4>[ 3.475036] [1: init: 1] [c1] Mali<2>: Driver revision: |
| <4>[ 3.475036] [1: init: 1] [c1] Mali<2>: mali_module_init() registering driver |
| <4>[ 3.475311] [1: init: 1] [c1] Mali<2>: mali_probe(): Called for platform device 60000000.gpu |
| <4>[ 3.476531] [1: init: 1] [c1] Mali<2>: Mali memory settings (shared: 0x40000000) |
| <4>[ 3.476562] [1: init: 1] [c1] Mali<2>: Using device defined frame buffer settings (0x00000000@0x00000000) |
| <4>[ 3.476562] [1: init: 1] [c1] Mali<2>: Mali PMU: Creating Mali PMU core |
| <4>[ 3.476593] [1: init: 1] [c1] Mali<2>: Mali PM domain: Creating Mali PM domain (mask=0x00001000) |
| <4>[ 3.476654] [1: init: 1] [c1] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP0 |
| <4>[ 3.476654] [1: init: 1] [c1] Mali<2>: Mali PP: Base address of PP core: 0x60008000 |
| <4>[ 3.476837] [0: init: 1] [c0] Mali<2>: Found Mali GPU Mali-400 MP r1p1 |
| <4>[ 3.477172] [0: init: 1] [c0] Mali<2>: Mali L2 cache: Created Mali_L2: 32K, 4-way, 64byte cache line, 64bit external bus |
| <4>[ 3.477203] [0: init: 1] [c0] Mali<2>: Mali MMU: Creating Mali MMU: Mali_GP_MMU |
| <4>[ 3.477233] I[0: init: 1] [c0] Mali<2>: mali_mmu_probe_irq_acknowledge: intstat 0x3 |
| <4>[ 3.477233] I[0: init: 1] [c0] Mali<2>: Probe: Page fault detect: PASSED |
| <4>[ 3.477264] I[0: init: 1] [c0] Mali<2>: Probe: Bus read error detect: PASSED |
| <4>[ 3.477294] [0: init: 1] [c0] Mali<2>: Mali GP: Creating Mali GP core: Mali_GP |
| <4>[ 3.477325] [0: init: 1] [c0] Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP0_MMU |
| <4>[ 3.477355] I[0: init: 1] [c0] Mali<2>: mali_mmu_probe_irq_acknowledge: intstat 0x3 |
| <4>[ 3.477386] I[0: init: 1] [c0] Mali<2>: Probe: Page fault detect: PASSED |
| <4>[ 3.477386] I[0: init: 1] [c0] Mali<2>: Probe: Bus read error detect: PASSED |
| <4>[ 3.477416] [0: init: 1] [c0] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP0 |
| <4>[ 3.477447] [0: init: 1] [c0] Mali<2>: Mali PP: Base address of PP core: 0x60008000 |
| <4>[ 3.477478] [0: init: 1] [c0] Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP1_MMU |
| <4>[ 3.477508] I[0: init: 1] [c0] Mali<2>: mali_mmu_probe_irq_acknowledge: intstat 0x3 |
| <4>[ 3.477539] I[0: init: 1] [c0] Mali<2>: Probe: Page fault detect: PASSED |
| <4>[ 3.477539] I[0: init: 1] [c0] Mali<2>: Probe: Bus read error detect: PASSED |
| <4>[ 3.477569] [0: init: 1] [c0] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP1 |
| <4>[ 3.477600] [0: init: 1] [c0] Mali<2>: Mali PP: Base address of PP core: 0x6000a000 |
| <4>[ 3.477630] [0: init: 1] [c0] Mali<2>: 2+0 PP cores initialized |
| <4>[ 3.477661] [0: init: 1] [c0] Mali<2>: Mali GPU Timer: 100 |
| <4>[ 3.477661] [0: init: 1] [c0] Mali<2>: Mali GPU Utilization: Utilization handler installed |
| <4>[ 3.478179] [0: init: 1] [c0] Mali<2>: mali_probe(): Successfully initialized driver for platform device 60000000.gpu |
| <4>[ 3.478485] [0: init: 1] [c0] Mali: Mali device driver loaded |
| <4>[ 3.485382] [3: otpreload: 88] [c3] sensor open 0 |
| <4>[ 3.485412] [3: otpreload: 88] [c3] sensor id = 1 |
| <4>[ 3.485473] [3: otpreload: 88] [c3] SENSOR: set rst lvl: lvl 0, rst pin 187 |
| <4>[ 3.485504] [3: otpreload: 88] [c3] sensor id = 0 |
| <4>[ 3.485504] [3: otpreload: 88] [c3] SENSOR: set rst lvl: lvl 0, rst pin 186 |
| <6>[ 3.485839] [3: otpreload: 88] [c3] regu: @@@ldo_set_voltage: regu 0xee946f8c (vddcama) set voltage, 2800000(uV) 2800000(uV) |
| <6>[ 3.485900] [3: otpreload: 88] [c3] regu: @@@ldo_turn_on: regu 0xee946f8c (vddcama), turn on |
| <4>[ 3.485900] [3: otpreload: 88] [c3] sensor pwr on done: cnt=0x1, io=0, av=1, dv=0, mo=0 |
| <4>[ 3.485931] [3: otpreload: 88] [c3] SENSOR:set vol 2800000 vddcama 0!. |
| <4>[ 3.486053] [3: otpreload: 88] [c3] sensor set DVDD gpio=162, level=8 |
| <6>[ 3.486114] [3: otpreload: 88] [c3] regu: @@@ldo_set_voltage: regu 0xee9471b4 (vddcammot) set voltage, 2800000(uV) 2800000(uV) |
| <6>[ 3.486175] [3: otpreload: 88] [c3] regu: @@@ldo_turn_on: regu 0xee9471b4 (vddcammot), turn on |
| <4>[ 3.486175] [3: otpreload: 88] [c3] sensor pwr on done: cnt=0x1, io=0, av=1, dv=0, mo=1 |
| <4>[ 3.486206] [3: otpreload: 88] [c3] SENSOR:set vol 2800000 vddcammot 3!. |
| <6>[ 3.490264] [3: otpreload: 88] [c3] regu: @@@ldo_set_voltage: regu 0xee9470fc (vddcamio) set voltage, 1800000(uV) 1800000(uV) |
| <6>[ 3.490325] [3: otpreload: 88] [c3] regu: @@@ldo_turn_on: regu 0xee9470fc (vddcamio), turn on |
| <4>[ 3.490356] [3: otpreload: 88] [c3] sensor pwr on done: cnt=0x1, io=1, av=1, dv=0, mo=1 |
| <4>[ 3.490356] [3: otpreload: 88] [c3] SENSOR:set vol 1800000 vddcamio 2!. |
| <4>[ 3.492370] [3: otpreload: 88] [c3] SENSOR: set mclk org = 0, clk = 24 |
| <4>[ 3.492431] [3: otpreload: 88] [c3] SENSOR: set mclk X |
| <4>[ 3.494537] [3: otpreload: 88] [c3] SENSOR: set rst lvl: lvl 1, rst pin 186 |
| <4>[ 3.496582] [3: otpreload: 88] [c3] s5k4h5yc_poweron OK |
| <4>[ 3.496612] [3: otpreload: 88] [c3] SENSOR: set mclk org = 24, clk = 24 |
| <4>[ 3.496612] [3: otpreload: 88] [c3] SENSOR: set mclk X |
| <4>[ 3.496643] [3: otpreload: 88] [c3] sensor set i2c id 0 clk 400000 |
| <4>[ 3.496673] [3: otpreload: 88] [c3] sensor set i2c id 4 clk 400000 |
| <4>[ 3.496704] [3: otpreload: 88] [c3] Debug L 141, /home/dpi/qb5_8814/workspace/GRANDPRIMEVE3G_LTN_OPEN/android/kernel/drivers/media/sprd_sensor/otp/sensor_otp_coreprime3g_ve.c, _read_otp: SENSOR_s5k4h5yc: _s5k4h5yc_read_otp E |
| <4>[ 3.496704] [3: otpreload: 88] [c3] Debug L 102, /home/dpi/qb5_8814/workspace/GRANDPRIMEVE3G_LTN_OPEN/android/kernel/drivers/media/sprd_sensor/otp/sensor_otp_coreprime3g_ve.c, Sensor_WriteI2C: Sensor_ReadI2C, slave_addr=0x58, ptr=0xee099ee5, count=2 |
| <4>[ 3.497863] [3: otpreload: 88] [c3] Debug L 149, /home/dpi/qb5_8814/workspace/GRANDPRIMEVE3G_LTN_OPEN/android/kernel/drivers/media/sprd_sensor/otp/sensor_otp_coreprime3g_ve.c, _read_otp: write i2c rtn 0 type 3 |
| <4>[ 3.499969] [3: otpreload: 88] [c3] Debug L 178, /home/dpi/qb5_8814/workspace/GRANDPRIMEVE3G_LTN_OPEN/android/kernel/drivers/media/sprd_sensor/otp/sensor_otp_coreprime3g_ve.c, _read_otp: SENSOR_s5k4h5yc: _s5k4h5yc_read_otp X |
| <4>[ 3.499999] [3: otpreload: 88] [c3] Debug L 141, /home/dpi/qb5_8814/workspace/GRANDPRIMEVE3G_LTN_OPEN/android/kernel/drivers/media/sprd_sensor/otp/sensor_otp_coreprime3g_ve.c, _read_otp: SENSOR_s5k4h5yc: _s5k4h5yc_read_otp E |
| <4>[ 3.499999] [3: otpreload: 88] [c3] Debug L 102, /home/dpi/qb5_8814/workspace/GRANDPRIMEVE3G_LTN_OPEN/android/kernel/drivers/media/sprd_sensor/otp/sensor_otp_coreprime3g_ve.c, Sensor_WriteI2C: Sensor_ReadI2C, slave_addr=0x58, ptr=0xee099ee5, count=2 |
| <4>[ 3.501129] [3: otpreload: 88] [c3] Debug L 149, /home/dpi/qb5_8814/workspace/GRANDPRIMEVE3G_LTN_OPEN/android/kernel/drivers/media/sprd_sensor/otp/sensor_otp_coreprime3g_ve.c, _read_otp: write i2c rtn 0 type 1 |
| <4>[ 3.501922] [3: otpreload: 88] [c3] Debug L 178, /home/dpi/qb5_8814/workspace/GRANDPRIMEVE3G_LTN_OPEN/android/kernel/drivers/media/sprd_sensor/otp/sensor_otp_coreprime3g_ve.c, _read_otp: SENSOR_s5k4h5yc: _s5k4h5yc_read_otp X |
| <4>[ 3.501953] [3: otpreload: 88] [c3] Debug L 141, /home/dpi/qb5_8814/workspace/GRANDPRIMEVE3G_LTN_OPEN/android/kernel/drivers/media/sprd_sensor/otp/sensor_otp_coreprime3g_ve.c, _read_otp: SENSOR_s5k4h5yc: _s5k4h5yc_read_otp E |
| <4>[ 3.501953] [3: otpreload: 88] [c3] Debug L 102, /home/dpi/qb5_8814/workspace/GRANDPRIMEVE3G_LTN_OPEN/android/kernel/drivers/media/sprd_sensor/otp/sensor_otp_coreprime3g_ve.c, Sensor_WriteI2C: Sensor_ReadI2C, slave_addr=0x58, ptr=0xee099ee5, count=2 |
| <4>[ 3.503082] [3: otpreload: 88] [c3] Debug L 149, /home/dpi/qb5_8814/workspace/GRANDPRIMEVE3G_LTN_OPEN/android/kernel/drivers/media/sprd_sensor/otp/sensor_otp_coreprime3g_ve.c, _read_otp: write i2c rtn 0 type 0 |
| <4>[ 3.528533] [1: init: 1] [c1] SELinux: Could not stat /data/system/container: No such file or directory. |
| <7>[ 3.549865] [1: init: 1] [c1] [mtpg_open] line = [539] |
| <7>[ 3.549896] [1: init: 1] [c1] [mtpg_release_device] line = [1228] |
| <7>[ 3.549957] [1: init: 1] [c1] [mtpg_open] line = [539] |
| <7>[ 3.549957] [1: init: 1] [c1] [mtpg_release_device] line = [1228] |
| <3>[ 3.565948] [1: init: 1] [c1] init: do_restorecon: Could not access /carrier |
| <4>[ 3.566650] [1: init: 1] [c1] SELinux: Could not stat /NVM: No such file or directory. |
| <6>[ 3.602081] [1: init: 1] [c1] cproc proc open type: wdtirq |
| <6>[ 3.602081] [1: init: 1] ! |
| <6>[ 3.602203] [1: init: 1] cproc proc open type: stop |
| <6>[ 3.602203] [1: init: 1] !cproc proc open type: start |
| <6>[ 3.602264] [1: init: 1] ! |
| <6>[ 3.602355] [1: init: 1] cproc proc open type: modem |
| <6>[ 3.602355] [1: init: 1] !cproc proc open type: dsp |
| <6>[ 3.602416] [1: init: 1] ! |
| <6>[ 3.602508] [1: init: 1] cproc proc open type: mem |
| <6>[ 3.602508] [1: init: 1] !cproc proc open type: wdtirq |
| <6>[ 3.602600] [1: init: 1] ! |
| <6>[ 3.602661] [1: init: 1] cproc proc open type: stop |
| <6>[ 3.602661] [1: init: 1] !cproc proc open type: start |
| <6>[ 3.602722] [1: init: 1] ! |
| <6>[ 3.602813] [1: init: 1] cproc proc open type: modem |
| <6>[ 3.602813] [1: init: 1] !cproc proc open type: dsp |
| <6>[ 3.602874] [1: init: 1] ! |
| <6>[ 3.602935] [1: init: 1] cproc proc open type: mem |
| <6>[ 3.602935] [1: init: 1] !<6>[ 3.724853] [2: kworker/u8:3: 131] sec_hal_fg_get_property-13,val->intval = 3968 |
| <6>[ 3.724884] [2: kworker/u8:3: 131] [c2] sec_hal_fg_get_property-14,val->intval = 3968 |
| <6>[ 3.724914] [2: kworker/u8:3: 131] [c2] sprdfgu: rint:200,value.intval:257 |
| <6>[ 3.724975] [2: kworker/u8:3: 131] [c2] sec_hal_fg_get_property-14,val->intval = 3922 |
| <6>[ 3.724975] [2: kworker/u8:3: 131] [c2] sec_hal_fg_get_property-19,val->intval = 230 |
| <6>[ 3.725006] [2: kworker/u8:3: 131] [c2] sec_hal_fg_get_property-20,val->intval = 230 |
| <6>[ 3.725128] [2: kworker/u8:3: 131] [c2] read channel [1509] |
| <6>[ 3.725219] [2: kworker/u8:3: 131] [c2] read channel [1509] |
| <6>[ 3.725311] [2: kworker/u8:3: 131] [c2] read channel [1508] |
| <6>[ 3.725433] [2: kworker/u8:3: 131] [c2] read channel [1508] |
| <6>[ 3.725524] [2: kworker/u8:3: 131] [c2] read channel [1509] |
| <6>[ 3.725555] [2: kworker/u8:3: 131] [c2] sec-battery sec-battery.27: sec_bat_get_temperature_by_adc: Temp(257), Temp-ADC(1508) |
| <6>[ 3.725646] [2: kworker/u8:3: 131] [c2] read channel [1508] |
| <6>[ 3.725769] [2: kworker/u8:3: 131] [c2] read channel [1509] |
| <6>[ 3.725860] [2: kworker/u8:3: 131] [c2] read channel [1509] |
| <6>[ 3.725952] [2: kworker/u8:3: 131] [c2] read channel [1508] |
| <6>[ 3.726043] [2: kworker/u8:3: 131] [c2] read channel [1509] |
| <6>[ 3.726074] [2: kworker/u8:3: 131] [c2] sec-battery sec-battery.27: sec_bat_get_temperature_by_adc: Temp(257), Temp-ADC(1508) |
| <6>[ 3.726104] [2: kworker/u8:3: 131] [c2] sprdfgu: sprdfgu_read_soc delta 0mAh,sprdfgu_data.init_clbcnt:32683622 |
| <6>[ 3.726135] [2: kworker/u8:3: 131] [c2] sprdfgu: sprdfgu_read_soc delta capacity 0,full capacity 2600 |
| <6>[ 3.726135] [2: kworker/u8:3: 131] [c2] sprdfgu: sprdfgu_read_soc soc 64,sprdfgu_data.init_cap 64 |
| <6>[ 3.726165] [2: kworker/u8:3: 131] [c2] sprdfgu: rint:200,value.intval:257 |
| <6>[ 3.727203] [2: kworker/u8:3: 131] [c2] SM5701_get_charging_status : SM5701_STATUS2 : 0x08 |
| <6>[ 3.729125] [2: kworker/u8:3: 131] [c2] sprdfgu: cnom_temp 2600, delta_soc 0,comp_soc64,soc 64,temp 25 |
| <6>[ 3.729156] [2: kworker/u8:3: 131] [c2] fgu_capacity: = 64,flush_time: = 3,period_time:=1 |
| <6>[ 3.729187] [2: kworker/u8:3: 131] [c2] sec_hal_fg_get_property-45,val->intval = 640 |
| <6>[ 3.729217] [2: kworker/u8:3: 131] [c2] sec-battery sec-battery.27: sec_bat_get_battery_info:Vnow(3968mV),Inow(230mA),Imax(460mA),SOC(64%),Tbat(257),Tchg(0),is_hc_usb(0) |
| <6>[ 3.730194] [2: kworker/u8:3: 131] [c2] SM5701_get_battery_present: SM5701_STATUS1 (0x24) |
| <6>[ 3.730224] [2: kworker/u8:3: 131] [c2] sec-battery sec-battery.27: sec_bat_battery_cable_check: Battery Connected |
| <6>[ 3.730255] [2: kworker/u8:3: 131] [c2] sec-battery sec-battery.27: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), level(100%) |
| <3>[ 4.044708] [1: init: 1] [c1] init: cannot find '/system/bin/sysmon', disabling 'sysmon' |
| <6>[ 4.051513] [0: healthd: 161] [c0] healthd: Healthd mode is android |
| <3>[ 4.057708] [1: init: 1] [c1] init: cannot find '/system/bin/watchdogd', disabling 'watchdogd' |
| <6>[ 4.058135] [0: healthd: 161] [c0] binder: 161:161 transaction failed 29189, size 0-0 |
| <3>[ 4.058288] [1: init: 1] [c1] init: Warning! Service swapon needs a SELinux domain defined; please fix! |
| <6>[ 4.069519] [2: sswap: 170] [c2] Adding 524284k swap on /dev/block/vnswap0. Priority:-1 extents:1 across:524284k SSFS |
| <3>[ 4.084259] [2: init: 1] [c2] init: using deprecated syntax for specifying property 'ro.product.model', use ${name} instead |
| <3>[ 4.084564] [2: init: 1] [c2] init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead |
| <3>[ 4.114196] [2: init: 1] [c2] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64' |
| <3>[ 4.127685] [2: init: 1] [c2] init: cannot find '/system/bin/wcnd', disabling 'wcnd' |
| <3>[ 4.129058] [2: init: 1] [c2] init: cannot find '/system/bin/ext_chown.sh', disabling 'chown_service' |
| <3>[ 4.133148] [2: init: 1] [c2] init: cannot find '/system/bin/usb_portd', disabling 'usb_portd' |
| <3>[ 4.133209] [2: init: 1] [c2] init: cannot find '/system/bin/atxd', disabling 'atxd' |
| <3>[ 4.133270] [2: init: 1] [c2] init: cannot find '/system/bin/usbdev_mode', disabling 'usbdev_mode' |
| <3>[ 4.168273] [2: init: 1] [c2] init: property 'persist.fuse_sdcard' doesn't exist while expanding '${persist.fuse_sdcard}' |
| <3>[ 4.168334] [2: init: 1] [c2] init: cannot expand '${persist.fuse_sdcard}' while assigning to 'ro.fuse_sdcard' |
| <6>[ 4.185211] [3: modemd: 199] [c3] cproc proc open type: wdtirq |
| <6>[ 4.185211] [3: modemd: 199] ! |
| <6>[ 4.185302] [3: modemd: 199] cproc proc poll type: wdtirq |
| <4>[ 4.220825] [3: sh: 209] [c3] macloader: macloader triggered |
| <4>[ 4.232208] [3: refnotify: 203] [c3] RTC open is calling! |
| <4>[ 4.232452] [3: refnotify: 203] [c3] RTC open is calling! |
| <4>[ 4.234313] [1: sh: 211] [c1] macloader: wlan interface loaded |
| <4>[ 4.236358] I[0: nvitemd: 202] [c0] RTC ***** interrupt happen |
| <6>[ 4.276123] [3: rild: 198] [c3] warning: `rild' uses 32-bit capabilities (legacy support in use) |
| <6>[ 4.323425] [3: init: 1] [c3] EXT4-fs (mmcblk0p26): mounted filesystem with ordered data mode. Opts: (null) |
| <7>[ 4.323486] [3: init: 1] [c3] SELinux: initialized (dev mmcblk0p26, type ext4), uses xattr |
| <6>[ 4.325225] [3: init: 1] [c3] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj: |
| <6>[ 4.325256] [3: init: 1] [c3] lowmemorykiller: oom_adj 0 => oom_score_adj 0 |
| <6>[ 4.325256] [3: init: 1] [c3] lowmemorykiller: oom_adj 1 => oom_score_adj 58 |
| <6>[ 4.325286] [3: init: 1] [c3] lowmemorykiller: oom_adj 3 => oom_score_adj 176 |
| <6>[ 4.325286] [3: init: 1] [c3] lowmemorykiller: oom_adj 5 => oom_score_adj 294 |
| <6>[ 4.325317] [3: init: 1] [c3] lowmemorykiller: oom_adj 9 => oom_score_adj 529 |
| <6>[ 4.325317] [3: init: 1] [c3] lowmemorykiller: oom_adj 15 => oom_score_adj 1000 |
| <7>[ 4.325775] [3: init: 1] [c3] usb: enable_store enabled=0, !dev->enabled=1 |
| <3>[ 4.325805] [3: init: 1] [c3] android_usb: already disabled |
| <3>[ 4.326751] [3: init: 1] [c3] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead |
| <4>[ 4.326873] [3: init: 1] [c3] init(1) functions_store(ptp,adb) |
| <7>[ 4.326904] [3: init: 1] [c3] usb: android_enable_function name=ptp |
| <7>[ 4.326934] [3: init: 1] [c3] usb: android_enable_function name=ffs |
| <3>[ 4.327331] [3: init: 1] [c3] init: using deprecated syntax for specifying property 'persist.sys.usb.sport', use ${name} instead |
| <3>[ 4.327362] [3: init: 1] [c3] init: property 'persist.sys.usb.sport' doesn't exist while expanding '$persist.sys.usb.sport' |
| <3>[ 4.327392] [3: init: 1] [c3] init: cannot expand '$persist.sys.usb.sport' while writing to '/sys/class/android_usb/android0/f_acm/instances' |
| <7>[ 4.327545] [3: init: 1] [c3] usb: enable_store enabled=1, !dev->enabled=1 |
| <7>[ 4.327575] [3: init: 1] [c3] usb: enable_store f:ptp |
| <7>[ 4.327575] [3: init: 1] [c3] usb: enable_store f:ffs |
| <7>[ 4.327606] [3: init: 1] [c3] usb: enable_store next cmd : usb_add_config |
| <3>[ 4.328460] [3: init: 1] [c3] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead |
| <6>[ 4.338226] [0: sdcard: 196] [c0] sdcardfs: version 2.1.4 |
| <6>[ 4.338256] [0: sdcard: 196] [c0] sdcardfs: dev_name -> /data/media |
| <6>[ 4.338256] [0: sdcard: 196] [c0] sdcardfs: options -> uid=1023,gid=1023,wgid=1015,derive=legacy,reserved_mb=20 |
| <6>[ 4.340454] [0: sdcard: 196] [c0] sdcardfs: created packagelist pkgld/240 |
| <6>[ 4.340911] [0: sdcard: 196] [c0] sdcardfs: mounted on top of /data/media type ext4 |
| <7>[ 4.341033] [0: sdcard: 196] [c0] SELinux: initialized (dev sdcardfs, type sdcardfs), uses xattr |
| <6>[ 4.341400] [1: adbd: 241] [c1] read descriptors |
| <6>[ 4.341430] [1: adbd: 241] [c1] read strings |
| <7>[ 4.341461] [1: adbd: 241] [c1] usb: usb_string_ids_n --cdev(0xed853e00)->next_string_id=4 |
| <4>[ 4.341491] [1: adbd: 241] [c1] adbd(241) usb_add_config |
| <7>[ 4.341491] [1: adbd: 241] [c1] usb: android_bind_enabled_functions f:ptp |
| <7>[ 4.341522] [1: adbd: 241] [c1] usb: usb_string_id cdev(0xed853e00)->next_string_id=6 |
| <7>[ 4.341522] [1: adbd: 241] [c1] [mtpg_function_bind] line = [1378] |
| <4>[ 4.341613] [1: adbd: 241] [c1] dual speed mtp: IN/ep1in, OUT/ep1out |
| <7>[ 4.341644] [1: adbd: 241] [c1] usb: android_bind_enabled_functions f:ffs |
| <6>[ 4.345611] [3: pkgld: 240] [c3] sdcardfs: read_package_list |
| <6>[ 4.571807] [1: adbd: 241] [c1] usb_notify: get_usb_mode usb mode=0 |
| <4>[ 4.571838] [1: adbd: 241] [c1] usb: pullup, d->enable = 1, d->vbus=0 |
| |
| <6>[ 4.730499] [2: kworker/u8:0: 6] [c2] sec_hal_fg_get_property-13,val->intval = 3946 |
| <6>[ 4.730560] [2: kworker/u8:0: 6] [c2] sec_hal_fg_get_property-14,val->intval = 3946 |
| <6>[ 4.730590] [2: kworker/u8:0: 6] [c2] sprdfgu: rint:200,value.intval:257 |
| <6>[ 4.730621] [2: kworker/u8:0: 6] [c2] sec_hal_fg_get_property-14,val->intval = 3923 |
| <6>[ 4.730651] [2: kworker/u8:0: 6] [c2] sec_hal_fg_get_property-19,val->intval = 118 |
| <6>[ 4.730682] [2: kworker/u8:0: 6] [c2] sec_hal_fg_get_property-20,val->intval = 118 |
| <6>[ 4.730804] [2: kworker/u8:0: 6] [c2] read channel [1509] |
| <6>[ 4.730926] [2: kworker/u8:0: 6] [c2] read channel [1508] |
| <6>[ 4.731048] [2: kworker/u8:0: 6] [c2] read channel [1508] |
| <6>[ 4.731140] [2: kworker/u8:0: 6] [c2] read channel [1509] |
| <6>[ 4.731231] [2: kworker/u8:0: 6] [c2] read channel [1509] |
| <6>[ 4.731262] [2: kworker/u8:0: 6] [c2] sec-battery sec-battery.27: sec_bat_get_temperature_by_adc: Temp(257), Temp-ADC(1508) |
| <6>[ 4.731384] [2: kworker/u8:0: 6] [c2] read channel [1509] |
| <6>[ 4.731506] [2: kworker/u8:0: 6] [c2] read channel [1508] |
| <6>[ 4.731597] [2: kworker/u8:0: 6] [c2] read channel [1509] |
| <6>[ 4.731719] [2: kworker/u8:0: 6] [c2] read channel [1510] |
| <6>[ 4.731842] [2: kworker/u8:0: 6] [c2] read channel [1507] |
| <6>[ 4.731872] [2: kworker/u8:0: 6] [c2] sec-battery sec-battery.27: sec_bat_get_temperature_by_adc: Temp(257), Temp-ADC(1508) |
| <6>[ 4.731903] [2: kworker/u8:0: 6] [c2] sprdfgu: sprdfgu_read_soc delta 0mAh,sprdfgu_data.init_clbcnt:32683622 |
| <6>[ 4.731933] [2: kworker/u8:0: 6] [c2] sprdfgu: sprdfgu_read_soc delta capacity 0,full capacity 2600 |
| <6>[ 4.731964] [2: kworker/u8:0: 6] [c2] sprdfgu: sprdfgu_read_soc soc 64,sprdfgu_data.init_cap 64 |
| <6>[ 4.731964] [2: kworker/u8:0: 6] [c2] sprdfgu: rint:200,value.intval:257 |
| <6>[ 4.733093] [2: kworker/u8:0: 6] [c2] SM5701_get_charging_status : SM5701_STATUS2 : 0x08 |
| <6>[ 4.735260] [2: kworker/u8:0: 6] [c2] sprdfgu: cnom_temp 2600, delta_soc 0,comp_soc64,soc 64,temp 25 |
| <6>[ 4.735321] [2: kworker/u8:0: 6] [c2] fgu_capacity: = 64,flush_time: = 4,period_time:=1 |
| <6>[ 4.735351] [2: kworker/u8:0: 6] [c2] sec_hal_fg_get_property-45,val->intval = 640 |
| <6>[ 4.735382] [2: kworker/u8:0: 6] [c2] sec-battery sec-battery.27: sec_bat_get_battery_info:Vnow(3946mV),Inow(118mA),Imax(460mA),SOC(64%),Tbat(257),Tchg(0),is_hc_usb(0) |
| <6>[ 4.736450] [2: kworker/u8:0: 6] [c2] SM5701_get_battery_present: SM5701_STATUS1 (0x24) |
| <6>[ 4.736480] [2: kworker/u8:0: 6] [c2] sec-battery sec-battery.27: sec_bat_battery_cable_check: Battery Connected |
| <6>[ 4.736511] [2: kworker/u8:0: 6] [c2] sec-battery sec-battery.27: sec_bat_time_management: Charging Time : 3 secs |
| <6>[ 4.736541] [2: kworker/u8:0: 6] [c2] sec-battery sec-battery.27: sec_bat_temperature: HLT(0) HLR(0) HT(600), HR(460), LT(-50), LR(0) |
| <6>[ 4.736572] [2: kworker/u8:0: 6] [c2] sec-battery sec-battery.27: sec_bat_fullcharged_check: Charging Mode : Normal |
| <6>[ 4.736572] [2: kworker/u8:0: 6] [c2] sec-battery sec-battery.27: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), level(100%) |
| <4>[ 4.812774] [0: surfaceflinger: 166] [c0] gsp_get_chip_id[517] return chip id 0x8730c001 |
| <4>[ 4.812805] [0: surfaceflinger: 166] [c0] gsp_get_chip_id[517] return chip id 0x8730c001 |
| <4>[ 4.812805] [0: surfaceflinger: 166] [c0] GSP : get chip id :8730c001 is validate, scan bugchip list. |
| <4>[ 4.812835] [0: surfaceflinger: 166] [c0] GSP : mismatch bug chip id. |
| <4>[ 4.812835] [0: surfaceflinger: 166] [c0] dolphin tshark GSP : gsp address type :2 |
| <4>[ 4.812866] [0: surfaceflinger: 166] [c0] GSP [564]: gsp address type :2 , |
| <4>[ 4.819824] [0: surfaceflinger: 166] [c0] Mali<2>: Session 0xECDB8A00 with pid 166 was granted higher priority. |
| <3>[ 4.820281] [0: surfaceflinger: 166] [c0] ion_invalidate_for_cpu: dmabuf is error and dmabuf is fffffff7! |
| <4>[ 4.836456] [2: surfaceflinger: 166] [c2] sprdfb: [sprdfb_ioctl] : SPRD_FB_SET_POWER_MODE (2) |
| <3>[ 5.076629] [1: healthd: 161] [c1] healthd: initial Capacity max: '0' |
| <4>[ 5.077056] [1: healthd: 161] [c1] healthd: batteryPogoOnlnePath not found |
| <6>[ 5.080749] [1: healthd: 161] [c1] sec-battery sec-battery.27: sec_bat_show_attrs: show attr offset : 59. |
| <3>[ 5.080780] [1: healthd: 161] [c1] sec_bat_show_attrs: Fail to battery->pdata->fuelgauge_name get (39=>-22) |
| <6>[ 5.081115] [1: healthd: 161] [c1] sec-battery sec-battery.27: sec_bat_show_attrs: show attr offset : 32. |
| <6>[ 5.081268] [1: healthd: 161] [c1] healthd: battery l=64 v=3946 t=25.7 h=2 st=2 c=0 o=4 ca=118 ct=1 ps=0 hv=0 chg=u |
| <6>[ 5.081298] [1: healthd: 161] [c1] BatteryPropertiesRegistrar: notifyListeners : start |
| <6>[ 5.081329] [1: healthd: 161] [c1] BatteryPropertiesRegistrar: notifyListeners : done |
| <4>[ 5.329528] [2: otpreload: 88] [c2] Debug L 178, /home/dpi/qb5_8814/workspace/GRANDPRIMEVE3G_LTN_OPEN/android/kernel/drivers/media/sprd_sensor/otp/sensor_otp_coreprime3g_ve.c, _read_otp: SENSOR_s5k4h5yc: _s5k4h5yc_read_otp X |
| <4>[ 5.329589] [2: otpreload: 88] [c2] sensor id = 1 |
| <4>[ 5.329650] [2: otpreload: 88] [c2] SENSOR: set rst lvl: lvl 0, rst pin 187 |
| <4>[ 5.329650] [2: otpreload: 88] [c2] sensor id = 0 |
| <6>[ 5.329711] [2: otpreload: 88] [c2] regu: @@@ldo_turn_off: regu 0xee9471b4 (vddcammot), turn off |
| <4>[ 5.329772] [2: otpreload: 88] [c2] SENSOR:set vol 0 vddcammot 3!. |
| <4>[ 5.329956] [2: otpreload: 88] [c2] SENSOR: set mclk org = 24, clk = 0 |
| <4>[ 5.329986] [2: otpreload: 88] [c2] SENSOR: set mclk X |
| <4>[ 5.330108] [2: otpreload: 88] [c2] SENSOR: set rst lvl: lvl 0, rst pin 186 |
| <6>[ 5.330230] [2: otpreload: 88] [c2] regu: @@@ldo_turn_off: regu 0xee9470fc (vddcamio), turn off |
| <4>[ 5.330291] [2: otpreload: 88] [c2] SENSOR:set vol 0 vddcamio 2!. |
| <4>[ 5.330535] [2: otpreload: 88] [c2] sensor set DVDD gpio=162, level=9 |
| <6>[ 5.330780] [2: otpreload: 88] [c2] regu: @@@ldo_turn_off: regu 0xee946f8c (vddcama), turn off |
| <4>[ 5.330841] [2: otpreload: 88] [c2] SENSOR:set vol 0 vddcama 0!. |
| <4>[ 5.331054] [2: otpreload: 88] [c2] s5k4h5yc_poweroff OK |
| <4>[ 5.331115] [2: kworker/2:1: 136] [c2] sensor: release |
| <4>[ 5.331207] [2: kworker/2:1: 136] [c2] SENSOR:set vol 0 vddcammot 3!. |
| <4>[ 5.331298] [2: kworker/2:1: 136] [c2] SENSOR:set vol 0 vddcama 0!. |
| <4>[ 5.331359] [2: kworker/2:1: 136] [c2] sensor set DVDD gpio=162, level=9 |
| <4>[ 5.331420] [2: kworker/2:1: 136] [c2] SENSOR:set vol 0 vddcamio 2!. |
| <4>[ 5.331420] [2: kworker/2:1: 136] [c2] SENSOR: set mclk org = 0, clk = 0 |
| <4>[ 5.331451] [2: kworker/2:1: 136] [c2] SENSOR: set mclk X |
| <4>[ 5.332397] [2: kworker/2:1: 136] [c2] sensor: release 0 |
| <4>[ 5.332427] [2: otpreload: 88] [c2] Debug L 288, /home/dpi/qb5_8814/workspace/GRANDPRIMEVE3G_LTN_OPEN/android/kernel/drivers/media/sprd_sensor/otp/sensor_otp_coreprime3g_ve.c, sensor_reloadinfo_thread: sensor_reloadinfo_thread end |
| <6>[ 5.765747] [3: BootAnimation: 380] [c3] !@BootAnimation : [Encryption info]crypt_state = unencrypted, crypt_input_window = 0, crypt_type = 0 |
| <3>[ 5.792266] [1: surfaceflinger: 166] [c1] ion_invalidate_for_cpu: dmabuf is error and dmabuf is fffffff7! |
| <6>[ 5.808197] [3: Binder_2: 247] [c3] ion_system_heap_allocate, size: 1040384, time: 1007 us |
| <6>[ 5.887847] [1: Binder_1: 246] [c1] ion_system_heap_allocate, size: 1040384, time: 1129 us |
| <6>[ 5.968139] [3: Binder_2: 247] [c3] ion_system_heap_allocate, size: 1040384, time: 1069 us |
| <6>[ 6.381134] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set PGA[HPL] to 8 |
| <6>[ 6.381195] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set PGA[HPR] to 8 |
| <6>[ 6.381256] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set PGA[DACL] to 7 |
| <6>[ 6.381286] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set PGA[DACR] to 7 |
| <6>[ 6.381347] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set PGA[CG_HPL_1] to 63 |
| <6>[ 6.381378] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set PGA[CG_HPR_1] to 63 |
| <6>[ 6.381439] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set PGA[CG_HPL_2] to 7 |
| <6>[ 6.381469] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set PGA[CG_HPR_2] to 7 |
| <6>[ 6.381530] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set PGA[SPKL] to 10 |
| <6>[ 6.381561] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set PGA[SPKR] to 10 |
| <6>[ 6.381622] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set PGA[DACL] to 5 |
| <6>[ 6.381652] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set PGA[DACR] to 5 |
| <6>[ 6.381683] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set PGA[EAR] to 10 |
| <6>[ 6.381744] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set PGA[DACL] to 5 |
| <6>[ 6.381805] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set PGA[DACR] to 5 |
| <6>[ 6.381896] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set PGA[ADCL] to 12 |
| <6>[ 6.381958] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set PGA[ADCR] to 12 |
| <6>[ 6.383331] [3: mediaserver: 180] [c3] [ASoC:BOARD] Mic Jack Switch Off |
| <6>[ 6.383819] [3: mediaserver: 180] [c3] [ASoC:BOARD] Aux Mic Jack Switch Off |
| <6>[ 6.384552] [3: mediaserver: 180] [c3] [ASoC:BOARD] HP Mic Jack Switch Off |
| <6>[ 6.384857] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set ADCL->SPKL Switch On |
| <6>[ 6.386291] [0: mediaserver: 180] [c0] [ASoC:CDCV4] Set ADCR->SPKL Switch On |
| <6>[ 6.387023] [0: mediaserver: 180] [c0] [ASoC:CDCV4] Set ADCL->SPKL Switch Off |
| <6>[ 6.387542] [0: mediaserver: 180] [c0] [ASoC:CDCV4] Set ADCR->SPKL Switch Off |
| <6>[ 6.396118] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set ADCR->HPL Switch On |
| <6>[ 6.396911] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set ADCL->HPR Switch On |
| <6>[ 6.397583] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set ADCR->HPL Switch Off |
| <6>[ 6.397888] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set ADCL->HPR Switch Off |
| <6>[ 6.398742] [3: mediaserver: 180] [c3] [ASoC:BOARD] Line Jack Switch Off |
| <6>[ 6.399627] [3: mediaserver: 180] [c3] [ASoC:BOARD] Dig FM Jack Switch Off |
| <6>[ 6.400207] [3: mediaserver: 180] [c3] [ASoC:BOARD] Ext Spk Switch Off |
| <6>[ 6.400787] [3: mediaserver: 180] [c3] [ASoC:BOARD] HeadPhone Jack Switch Off |
| <6>[ 6.401062] [3: mediaserver: 180] [c3] [ASoC:BOARD] Ext Ear Switch Off |
| <6>[ 6.405181] [3: mediaserver: 180] [c3] [ASoC: VBC ] VBC EQ loading |
| <6>[ 6.415069] [1: mediaserver: 180] [c1] [ASoC: VBC ] VBC DAC EQ Switch On |
| <6>[ 6.415100] [1: mediaserver: 180] [c1] [ASoC: VBC ] VBC DAC EQ Apply 'Headset' |
| <6>[ 6.421936] [1: mediaserver: 180] [c1] [ASoC:CDCV4] Set PGA[SPKL] to 11 |
| <6>[ 6.421997] [1: mediaserver: 180] [c1] [ASoC:CDCV4] Set PGA[DACL] to 7 |
| <6>[ 6.422027] [1: mediaserver: 180] [c1] [ASoC: VBC ] VBC DAC0 DG set 0x19 |
| <6>[ 6.422088] [1: mediaserver: 180] [c1] [ASoC: VBC ] VBC DAC0 DG Switch On |
| <6>[ 6.422119] [1: mediaserver: 180] [c1] [ASoC:CDCV4] Set PGA[SPKR] to 11 |
| <6>[ 6.422149] [1: mediaserver: 180] [c1] [ASoC:CDCV4] Set PGA[DACR] to 7 |
| <6>[ 6.422180] [1: mediaserver: 180] [c1] [ASoC: VBC ] VBC DAC1 DG set 0x19 |
| <6>[ 6.422210] [1: mediaserver: 180] [c1] [ASoC: VBC ] VBC DAC1 DG Switch On |
| <7>[ 6.668884] [3: main: 193] [c3] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs |
| <6>[ 6.844085] [2:TimedEventQueue: 507] [c2] ion_system_heap_allocate, size: 1536000, time: 1435 us |
| <6>[ 6.844268] [2:TimedEventQueue: 507] [c2] sprd_iommu_mm_clk_enable |
| <6>[ 6.849792] [2:TimedEventQueue: 507] [c2] vsp_open called ecbdbc80 |
| <6>[ 6.849822] [2:TimedEventQueue: 507] [c2] vsp_set_mm_clk: vsp_instance_cnt 0 |
| <6>[ 6.849884] [2:TimedEventQueue: 507] [c2] VSP mmi_clk_axi open |
| <6>[ 6.849914] [2:TimedEventQueue: 507] VSP mmi_clk open |
| <4>[ 6.849975] [2:TimedEventQueue: 507] [c2] vsp parent clock name clk_256m |
| <4>[ 6.850006] [2:TimedEventQueue: 507] [c2] vsp_freq 256000000 Hz |
| <6>[ 6.850036] [2:TimedEventQueue: 507] [c2] vsp_open: ret 0 |
| <6>[ 6.850067] [2:TimedEventQueue: 507] [c2] @vsp[vsp_nocache_mmap] |
| <6>[ 6.850097] [2:TimedEventQueue: 507] [c2] @vsp mmap c,b0833000,a000 |
| <6>[ 6.850128] [2:TimedEventQueue: 507] [c2] vsp version -enter |
| <6>[ 6.855377] [2:TimedEventQueue: 507] [c2] vsp_release: instance_cnt 1 |
| <6>[ 6.855407] [2:TimedEventQueue: 507] [c2] vsp_release ecbdbc80 |
| <6>[ 6.855438] [2:TimedEventQueue: 507] [c2] VSP mm_clk_axi close! |
| <6>[ 6.856323] [2:TimedEventQueue: 507] [c2] sprd_iommu_mm_clk_disable |
| <6>[ 6.861328] [2:TimedEventQueue: 507] [c2] ion_system_heap_allocate, size: 1536000, time: 31 us |
| <6>[ 6.861480] [2:TimedEventQueue: 507] [c2] sprd_iommu_mm_clk_enable |
| <6>[ 6.866973] [2:TimedEventQueue: 507] [c2] vsp_open called ecbdbcc0 |
| <6>[ 6.867004] [2:TimedEventQueue: 507] [c2] vsp_set_mm_clk: vsp_instance_cnt 0 |
| <6>[ 6.867065] [2:TimedEventQueue: 507] [c2] VSP mmi_clk_axi open |
| <6>[ 6.867095] [2:TimedEventQueue: 507] VSP mmi_clk open |
| <4>[ 6.867126] [2:TimedEventQueue: 507] [c2] vsp parent clock name clk_256m |
| <4>[ 6.867126] [2:TimedEventQueue: 507] [c2] vsp_freq 256000000 Hz |
| <6>[ 6.867156] [2:TimedEventQueue: 507] [c2] vsp_open: ret 0 |
| <6>[ 6.867218] [2:TimedEventQueue: 507] [c2] @vsp[vsp_nocache_mmap] |
| <6>[ 6.867218] [2:TimedEventQueue: 507] [c2] @vsp mmap c,b0833000,a000 |
| <6>[ 6.867248] [2:TimedEventQueue: 507] [c2] vsp version -enter |
| <6>[ 6.872100] [2:TimedEventQueue: 507] [c2] vsp_release: instance_cnt 1 |
| <6>[ 6.872131] [2:TimedEventQueue: 507] [c2] vsp_release ecbdbcc0 |
| <6>[ 6.872161] [2:TimedEventQueue: 507] [c2] VSP mm_clk_axi close! |
| <6>[ 6.873016] [2:TimedEventQueue: 507] [c2] sprd_iommu_mm_clk_disable |
| <6>[ 6.889373] [2:TimedEventQueue: 507] [c2] ion_system_heap_allocate, size: 2097152, time: 946 us |
| <6>[ 6.889556] [2:TimedEventQueue: 507] [c2] sprd_iommu_mm_clk_enable |
| <6>[ 6.897277] [2:TimedEventQueue: 507] [c2] vsp_open called ecbdbc40 |
| <6>[ 6.897308] [2:TimedEventQueue: 507] [c2] vsp_set_mm_clk: vsp_instance_cnt 0 |
| <6>[ 6.897369] [2:TimedEventQueue: 507] [c2] VSP mmi_clk_axi open |
| <6>[ 6.897399] [2:TimedEventQueue: 507] VSP mmi_clk open |
| <4>[ 6.897430] [2:TimedEventQueue: 507] [c2] vsp parent clock name clk_256m |
| <4>[ 6.897430] [2:TimedEventQueue: 507] [c2] vsp_freq 256000000 Hz |
| <6>[ 6.897460] [2:TimedEventQueue: 507] [c2] vsp_open: ret 0 |
| <6>[ 6.897491] [2:TimedEventQueue: 507] [c2] @vsp[vsp_nocache_mmap] |
| <6>[ 6.897521] [2:TimedEventQueue: 507] [c2] @vsp mmap c,b0822000,a000 |
| <6>[ 6.897552] [2:TimedEventQueue: 507] [c2] vsp version -enter |
| <6>[ 6.898651] [2:TimedEventQueue: 507] [c2] vsp_release: instance_cnt 1 |
| <6>[ 6.898681] [2:TimedEventQueue: 507] [c2] vsp_release ecbdbc40 |
| <6>[ 6.898712] [2:TimedEventQueue: 507] [c2] VSP mm_clk_axi close! |
| <6>[ 6.899200] [2:TimedEventQueue: 507] [c2] sprd_iommu_mm_clk_disable |
| <6>[ 6.916015] [0:TimedEventQueue: 507] [c0] ion_system_heap_allocate, size: 1536000, time: 30 us |
| <6>[ 6.916198] [0:TimedEventQueue: 507] [c0] sprd_iommu_mm_clk_enable |
| <6>[ 6.922241] [0:TimedEventQueue: 507] [c0] ion_system_heap_allocate, size: 598016, time: 916 us |
| <6>[ 6.927795] [0:TimedEventQueue: 507] [c0] vsp_open called ebdd69c0 |
| <6>[ 6.927825] [0:TimedEventQueue: 507] [c0] vsp_set_mm_clk: vsp_instance_cnt 0 |
| <6>[ 6.927856] [0:TimedEventQueue: 507] [c0] VSP mmi_clk_axi open |
| <6>[ 6.927886] [0:TimedEventQueue: 507] VSP mmi_clk open |
| <4>[ 6.927917] [0:TimedEventQueue: 507] [c0] vsp parent clock name clk_76m8 |
| <4>[ 6.927917] [0:TimedEventQueue: 507] [c0] vsp_freq 76800000 Hz |
| <6>[ 6.927947] [0:TimedEventQueue: 507] [c0] vsp_open: ret 0 |
| <6>[ 6.928009] [0:TimedEventQueue: 507] [c0] @vsp[vsp_nocache_mmap] |
| <6>[ 6.928009] [0:TimedEventQueue: 507] [c0] @vsp mmap c,b0833000,a000 |
| <6>[ 6.928039] [0:TimedEventQueue: 507] [c0] vsp version -enter |
| <6>[ 6.928680] [0:TimedEventQueue: 507] [c0] vsp_release: instance_cnt 1 |
| <6>[ 6.928710] [0:TimedEventQueue: 507] [c0] vsp_release ebdd69c0 |
| <6>[ 6.928741] [0:TimedEventQueue: 507] [c0] VSP mm_clk_axi close! |
| <6>[ 6.930236] [0:TimedEventQueue: 507] [c0] sprd_iommu_mm_clk_disable |
| <3>[ 6.952392] [2:TimedEventQueue: 507] [c2] clock[clk_coda7_axi]: get parent in probe[clk_76m8] by clk_get()! |
| <3>[ 6.952423] [2:TimedEventQueue: 507] [c2] clock[clk_coda7_axi]: get parent in probe[clk_192m] by clk_get()! |
| <3>[ 6.952484] [2:TimedEventQueue: 507] [c2] vpu parent clock name clk_192m, freq: 192000000Hz |
| <3>[ 6.952545] [2:TimedEventQueue: 507] [c2] vpu parent clock name clk_192m, freq: 192000000Hz |
| <3>[ 6.952575] [2:TimedEventQueue: 507] [c2] vpu parent clock name clk_128m, freq: 128000000Hz |
| <4>[ 6.952575] [2:TimedEventQueue: 507] [c2] [INFO ][CNM_VPU_DRV][F:vpu_open-L:501][VPUDRV] vpu_open done, open_count = 1 |
| <4>[ 6.953033] [2:TimedEventQueue: 507] [c2] [vpu_mmap], vm_pgoff = 0 |
| <6>[ 6.953247] [2:TimedEventQueue: 507] [c2] ion_system_heap_allocate, size: 2555904, time: 31 us |
| <6>[ 6.953430] [2:TimedEventQueue: 507] [c2] sprd_iommu_mm_clk_enable |
| <4>[ 6.963775] [2:TimedEventQueue: 507] [c2] [DEBUG][CNM_VPU_DRV][F:vpu_write-L:829]vpu_write set bit_firmware_info coreIdx=0x0, reg_base_offset=0x0 size=0x40c, bit_code[0]=0xe40e |
| <6>[ 6.965789] [2:TimedEventQueue: 507] [c2] sprd_iommu_mm_clk_disable |
| <4>[ 6.966217] [2:TimedEventQueue: 507] [c2] [INFO ][CNM_VPU_DRV][F:vpu_release-L:857][VPUDRV] vpu_release, open_count= 1 |
| <4>[ 6.966247] [2:TimedEventQueue: 507] [c2] [DEBUG][CNM_VPU_DRV][F:vpu_free_buffers-L:415]vpu_free_buffers |
| <4>[ 6.966247] [2:TimedEventQueue: 507] [c2] [DEBUG][CNM_VPU_DRV][F:vpu_free_instances-L:375]vpu_free_instances inter. sizeof(vpudrv_instance_pool_t)=81924 |
| <6>[ 7.040344] [2:TimedEventQueue: 507] [c2] vsp_open called ecb5d880 |
| <6>[ 7.040374] [2:TimedEventQueue: 507] [c2] vsp_set_mm_clk: vsp_instance_cnt 0 |
| <6>[ 7.040435] [2:TimedEventQueue: 507] [c2] VSP mmi_clk_axi open |
| <6>[ 7.041107] [2:TimedEventQueue: 507] VSP mmi_clk open |
| <4>[ 7.041137] [2:TimedEventQueue: 507] [c2] vsp parent clock name clk_76m8 |
| <4>[ 7.041168] [2:TimedEventQueue: 507] [c2] vsp_freq 76800000 Hz |
| <6>[ 7.041198] [2:TimedEventQueue: 507] [c2] vsp_open: ret 0 |
| <6>[ 7.041259] [2:TimedEventQueue: 507] [c2] @vsp[vsp_nocache_mmap] |
| <6>[ 7.041259] [2:TimedEventQueue: 507] [c2] @vsp mmap c,b081e000,a000 |
| <6>[ 7.041290] [2:TimedEventQueue: 507] [c2] vsp version -enter |
| <6>[ 7.042053] [2:TimedEventQueue: 507] [c2] vsp_release: instance_cnt 1 |
| <6>[ 7.042083] [2:TimedEventQueue: 507] [c2] vsp_release ecb5d880 |
| <6>[ 7.042480] [2:TimedEventQueue: 507] [c2] VSP mm_clk_axi close! |
| <6>[ 7.051269] [2:TimedEventQueue: 507] [c2] vsp_open called ecb5d880 |
| <6>[ 7.051300] [2:TimedEventQueue: 507] [c2] vsp_set_mm_clk: vsp_instance_cnt 0 |
| <6>[ 7.051361] [2:TimedEventQueue: 507] [c2] VSP mmi_clk_axi open |
| <6>[ 7.052032] [2:TimedEventQueue: 507] VSP mmi_clk open |
| <4>[ 7.052062] [2:TimedEventQueue: 507] [c2] vsp parent clock name clk_76m8 |
| <4>[ 7.052062] [2:TimedEventQueue: 507] [c2] vsp_freq 76800000 Hz |
| <6>[ 7.052093] [2:TimedEventQueue: 507] [c2] vsp_open: ret 0 |
| <6>[ 7.052154] [2:TimedEventQueue: 507] [c2] @vsp[vsp_nocache_mmap] |
| <6>[ 7.052185] [2:TimedEventQueue: 507] [c2] @vsp mmap c,b081e000,a000 |
| <6>[ 7.052215] [2:TimedEventQueue: 507] [c2] vsp version -enter |
| <6>[ 7.053466] [2:TimedEventQueue: 507] [c2] vsp_release: instance_cnt 1 |
| <6>[ 7.053497] [2:TimedEventQueue: 507] [c2] vsp_release ecb5d880 |
| <6>[ 7.053894] [2:TimedEventQueue: 507] [c2] VSP mm_clk_axi close! |
| <6>[ 7.069335] [3:TimedEventQueue: 507] [c3] vsp_open called ebdd6800 |
| <6>[ 7.069366] [3:TimedEventQueue: 507] [c3] vsp_set_mm_clk: vsp_instance_cnt 0 |
| <6>[ 7.069427] [3:TimedEventQueue: 507] [c3] VSP mmi_clk_axi open |
| <6>[ 7.070129] [3:TimedEventQueue: 507] VSP mmi_clk open |
| <4>[ 7.070159] [3:TimedEventQueue: 507] [c3] vsp parent clock name clk_76m8 |
| <4>[ 7.070190] [3:TimedEventQueue: 507] [c3] vsp_freq 76800000 Hz |
| <6>[ 7.070220] [3:TimedEventQueue: 507] [c3] vsp_open: ret 0 |
| <6>[ 7.070281] [3:TimedEventQueue: 507] [c3] @vsp[vsp_nocache_mmap] |
| <6>[ 7.070281] [3:TimedEventQueue: 507] [c3] @vsp mmap c,b0816000,a000 |
| <6>[ 7.070312] [3:TimedEventQueue: 507] [c3] vsp version -enter |
| <6>[ 7.071228] [3:TimedEventQueue: 507] [c3] vsp_release: instance_cnt 1 |
| <6>[ 7.071228] [3:TimedEventQueue: 507] [c3] vsp_release ebdd6800 |
| <6>[ 7.071594] [3:TimedEventQueue: 507] [c3] VSP mm_clk_axi close! |
| <6>[ 7.128509] [2: Thread-7: 585] [c2] !@Boot: beginofpreloadResources() |
| <6>[ 7.128540] [3: main: 193] [c3] !@Boot: beginofpreloadClasses() |
| <6>[ 7.762573] [3: main: 193] [c3] !@prldclssM: 1595 classes in 543ms. |
| <6>[ 7.771392] [3: AudioOut_2: 465] [c3] [ASoC: VBC ] VBC DAC EQ Apply 'Headset' |
| <6>[ 7.771667] [3: AudioOut_2: 465] [c3] [ASoC: PCM ] VBC Open Playback |
| <6>[ 7.771881] [3: AudioOut_2: 465] [c3] [ASoC:CDCV4] Playback rate is [44100] |
| <6>[ 7.771911] [3: AudioOut_2: 465] [c3] [ASoC: PCM ] chan=2 totsize=15360 period=3840 |
| <4>[ 7.771942] [3: AudioOut_2: 465] [c3] alloc dma chn is 25, and chn reg base is f0079600, dma chip base is f0078000 |
| <4>[ 7.771972] [3: AudioOut_2: 465] [c3] alloc dma chn is 26, and chn reg base is f0079640, dma chip base is f0078000 |
| <6>[ 7.772338] [0: mediaserver: 448] [c0] [ASoC:CDCV4] Config inter PA 0x210 |
| <6>[ 7.772491] [0: mediaserver: 448] [c0] [ASoC:CDCV4] Set PGA[SPKL] to 11 |
| <6>[ 7.772521] [0: mediaserver: 448] [c0] [ASoC:CDCV4] Set PGA[DACL] to 7 |
| <6>[ 7.772613] [0: mediaserver: 448] [c0] [ASoC:CDCV4] Set PGA[SPKR] to 11 |
| <6>[ 7.772644] [0: mediaserver: 448] [c0] [ASoC:CDCV4] Set PGA[DACR] to 7 |
| <6>[ 7.772735] [0: mediaserver: 448] [c0] [ASoC:BOARD] Mic Jack Switch Off |
| <6>[ 7.772857] [0: mediaserver: 448] [c0] [ASoC:BOARD] Aux Mic Jack Switch Off |
| <6>[ 7.772949] [0: mediaserver: 448] [c0] [ASoC:BOARD] HP Mic Jack Switch Off |
| <6>[ 7.774200] [0: AudioOut_2: 465] [c0] [ASoC: PCM ] S |
| <6>[ 7.774719] [2: mediaserver: 448] [c2] [ASoC:BOARD] Line Jack Switch Off |
| <6>[ 7.774841] [2: mediaserver: 448] [c2] [ASoC:BOARD] Dig FM Jack Switch Off |
| <6>[ 7.775024] [2: mediaserver: 448] [c2] [ASoC:BOARD] HeadPhone Jack Switch Off |
| <6>[ 7.775115] [2: mediaserver: 448] [c2] [ASoC:BOARD] Ext Ear Switch Off |
| <6>[ 7.775177] [2: mediaserver: 448] [c2] [ASoC:CDCV4] Set DACL->SPKL Switch On |
| <6>[ 7.775482] [2: mediaserver: 448] [c2] [ASoC:CDCV4] Set DACR->SPKL Switch On |
| <6>[ 7.775665] [2: mediaserver: 448] [c2] [ASoC:BOARD] Ext Spk Switch On |
| <3>[ 7.776397] [0: mediaserver: 448] [c0] [ASoC:CDCV4] ERR: Can't get vbat! |
| <3>[ 7.776458] [0: mediaserver: 448] [c0] [ASoC:CDCV4] is_low_power_support, chip_id=0x2723, ver_id=0x90 |
| <6>[ 7.776458] [0: mediaserver: 448] [c0] [ASoC:CDCV4] sprd_codec_analog_open get here, true |
| <6>[ 7.776672] [0: mediaserver: 448] [c0] [ASoC:CDCV4] DAC On |
| <6>[ 7.776794] [0: mediaserver: 448] [c0] [ASoC:CDCV4] switch_event Switch DACR(on) Event is PRE_PMU |
| <6>[ 7.776824] [0: mediaserver: 448] [c0] [ASoC:CDCV4] switch_event Switch DACL(on) Event is PRE_PMU |
| <3>[ 7.776885] [0: mediaserver: 448] [c0] [ASoC:CDCV4] is_low_power_support, chip_id=0x2723, ver_id=0x90 |
| <3>[ 7.776916] [0: mediaserver: 448] [c0] [ASoC:CDCV4] is_low_power_support, chip_id=0x2723, ver_id=0x90 |
| <6>[ 7.776947] [0: mediaserver: 448] [c0] [ASoC:CDCV4] inter PA Switch On |
| <6>[ 7.795135] [1: mediaserver: 448] [c1] [ASoC: VBC ] VBC DAC EQ Select 3 max 4 |
| <6>[ 7.795166] [1: mediaserver: 448] [c1] [ASoC: VBC ] VBC DAC EQ Apply 'Handsfree' |
| <6>[ 8.014648] [3: Thread-10: 608] [c3] !@prldclss2: 700 classes in 785ms. |
| <6>[ 8.159210] [2: Thread-9: 605] [c2] !@prldclss1: 710 classes in 941ms. |
| <6>[ 8.346679] [1: main: 193] [c1] !@Boot: EndofpreloadClasses() |
| <6>[ 8.408874] [1: main: 193] [c1] !@Boot: beginofpreparewebview() |
| <6>[ 8.421325] [1: main: 193] [c1] !@Boot: endofpreparewebview() |
| <6>[ 8.713562] [2: Thread-7: 585] [c2] !@Boot: End of preloadResources() |
| <6>[ 8.969665] [3: system_server: 715] [c3] !@Boot: Entered the Android system server! |
| <6>[ 9.339050] [2: system_server: 736] [c2] [gp2a]in func gp2a_data_rdy_trigger_set_state will enable the sensor |
| <6>[ 9.339080] [2: system_server: 736] [c2] [gp2a]in func gp2a_postenable will enable the sensor |
| <6>[ 9.339111] [2: system_server: 736] [c2] [SENOSR] gp2a_postenable, enable(1) |
| <6>[ 9.339630] [2: system_server: 736] [c2] [SENOSR] gp2a_postenable, mode(0) |
| <6>[ 9.339660] [2: system_server: 736] [c2] [SENSOR] gp2a_regulator_onoff on |
| <6>[ 9.339782] [2: system_server: 736] [c2] regu: @@@ldo_set_voltage: regu 0xee946ed4 (vddsim2) set voltage, 2850000(uV) 2850000(uV) |
| <6>[ 9.339843] [2: system_server: 736] [c2] regu: @@@ldo_turn_on: regu 0xee946ed4 (vddsim2), turn on |
| <6>[ 9.364562] [3: system_server: 736] [c3] [SENSOR] gp2a_power_onoff, status(1) |
| <6>[ 9.364593] [3: system_server: 736] [c3] [SENSOR] gp2a_leda_onoff on |
| <6>[ 9.396575] [3: system_server: 736] [c3] [gp2a]in func gp2a_data_rdy_trigger_set_state will enable the sensor |
| <6>[ 9.397827] [0: system_server: 736] [c0] [gp2a]in func gp2a_data_rdy_trigger_set_state will enable the sensor |
| <6>[ 9.397857] [0: system_server: 736] [c0] [gp2a]in func gp2a_predisable will cancel the work |
| <6>[ 9.397888] [0: system_server: 736] [c0] [SENSOR] gp2a_power_onoff, status(0) |
| <6>[ 9.398254] [0: system_server: 736] [c0] [SENSOR] gp2a_leda_onoff off |
| <6>[ 9.424682] [3: system_server: 736] [c3] [SENSOR] gp2a_regulator_onoff off |
| <6>[ 9.424865] [3: system_server: 736] [c3] regu: @@@ldo_set_voltage: regu 0xee946ed4 (vddsim2) set voltage, 2850000(uV) 2850000(uV) |
| <6>[ 9.424926] [3: system_server: 736] [c3] regu: @@@ldo_turn_off: regu 0xee946ed4 (vddsim2), turn off |
| <6>[ 9.454528] [3: system_server: 736] [c3] [gp2a]in func gp2a_data_rdy_trigger_set_state will enable the sensor |
| <6>[ 10.100006] [1: system_server: 715] [c1] request_suspend_state: wakeup (3->0) at 10075621337 (2017-09-12 23:50:09.251800537 UTC) |
| <6>[ 10.190399] [2: system_server: 715] [c2] !@Boot: Start PackageManagerService |
| <6>[ 12.754608] [0: pkgld: 240] [c0] sdcardfs: inotify event: 00000400 |
| <6>[ 12.754638] [0: pkgld: 240] [c0] sdcardfs: inotify event: 00008000 |
| <6>[ 12.755218] [0: pkgld: 240] [c0] sdcardfs: read_package_list |
| <6>[ 12.840362] [2: system_server: 715] [c2] !@Boot: End PackageManagerService |
| <6>[ 12.974639] [1: system_server: 715] [c1] !@ USE_STATIC_LIGHTS_HAL |
| <6>[ 12.974639] [1: system_server: 715] |
| <6>[ 12.974700] [1: system_server: 715] [c1] !@ lights hal name : Samsung lights Module |
| <6>[ 12.974700] [1: system_server: 715] |
| <6>[ 12.974761] [1: system_server: 715] [c1] !@ initialize_fds : g_lights_file_paths[0][0] : /sys/class/leds/lcd-backlight/brightness |
| <6>[ 12.974761] [1: system_server: 715] |
| <6>[ 12.974853] [1: system_server: 715] [c1] !@ initialize_fds : g_lights_fds Open error! : [2] |
| <6>[ 12.974853] [1: system_server: 715] |
| <6>[ 12.974914] [1: system_server: 715] [c1] !@ initialize_fds : g_lights_file_paths[0][1] : /sys/class/backlight/panel/brightness |
| <6>[ 12.974914] [1: system_server: 715] |
| <6>[ 12.975341] [1: system_server: 715] [c1] !@ initialize_fds : FOUND! : 0x4d |
| <6>[ 12.975341] [1: system_server: 715] |
| <6>[ 12.975402] [1: system_server: 715] [c1] !@ initialize_fds : g_lights_file_paths[1][0] : /sys/class/sec/sec_touchkey/brightness |
| <6>[ 12.975402] [1: system_server: 715] |
| <6>[ 12.975494] [1: system_server: 715] [c1] !@ initialize_fds : g_lights_fds Open error! : [2] |
| <6>[ 12.975494] [1: system_server: 715] |
| <6>[ 12.975555] [1: system_server: 715] [c1] !@ initialize_fds : g_lights_file_paths[1][1] : /sys/class/leds/button-backlight/brightness |
| <6>[ 12.975555] [1: system_server: 715] |
| <6>[ 12.975585] [1: system_server: 715] [c1] !@ initialize_fds : g_lights_fds Open error! : [2] |
| <6>[ 12.975585] [1: system_server: 715] |
| <6>[ 12.975646] [1: system_server: 715] [c1] !@ initialize_fds : g_lights_file_paths[1][2] : /sys/class/backlight/touchkey-led/brightness |
| <6>[ 12.975646] [1: system_server: 715] |
| <6>[ 12.975708] [1: system_server: 715] [c1] !@ initialize_fds : g_lights_fds Open error! : [2] |
| <6>[ 12.975708] [1: system_server: 715] |
| <6>[ 12.975738] [1: system_server: 715] [c1] !@ initialize_fds : g_lights_file_paths[1][3] : (null) |
| <6>[ 12.975738] [1: system_server: 715] |
| <6>[ 12.975799] [1: system_server: 715] [c1] !@ initialize_fds : g_lights_file_paths[2][0] : /sys/class/sec/sec_keypad/brightness |
| <6>[ 12.975799] [1: system_server: 715] |
| <6>[ 12.975830] [1: system_server: 715] [c1] !@ initialize_fds : g_lights_fds Open error! : [2] |
| <6>[ 12.975830] [1: system_server: 715] |
| <6>[ 12.975891] [1: system_server: 715] [c1] !@ initialize_fds : g_lights_file_paths[2][1] : /sys/class/leds/keyboard-backlight/brightness |
| <6>[ 12.975891] [1: system_server: 715] |
| <6>[ 12.975952] [1: system_server: 715] [c1] !@ initialize_fds : g_lights_fds Open error! : [2] |
| <6>[ 12.975952] [1: system_server: 715] |
| <6>[ 12.975982] [1: system_server: 715] [c1] !@ initialize_fds : g_lights_file_paths[2][2] : (null) |
| <6>[ 12.975982] [1: system_server: 715] |
| <6>[ 12.976013] [1: system_server: 715] [c1] !@ initialize_fds : g_lights_file_paths[3][0] : /sys/class/sec/led/led_pattern |
| <6>[ 12.976013] [1: system_server: 715] |
| <6>[ 12.976074] [1: system_server: 715] [c1] !@ initialize_fds : g_lights_fds Open error! : [2] |
| <6>[ 12.976074] [1: system_server: 715] |
| <6>[ 12.976104] [1: system_server: 715] [c1] !@ initialize_fds : g_lights_file_paths[3][1] : (null) |
| <6>[ 12.976104] [1: system_server: 715] |
| <6>[ 12.976165] [1: system_server: 715] [c1] !@ initialize_fds : g_lights_file_paths[4][0] : /sys/class/sec/led/led_blink |
| <6>[ 12.976165] [1: system_server: 715] |
| <6>[ 12.976196] [1: system_server: 715] [c1] !@ initialize_fds : g_lights_fds Open error! : [2] |
| <6>[ 12.976196] [1: system_server: 715] |
| <6>[ 12.976257] [1: system_server: 715] [c1] !@ initialize_fds : g_lights_file_paths[4][1] : (null) |
| <6>[ 12.976257] [1: system_server: 715] |
| <6>[ 12.993072] [0: servicemanager: 164] [c0] binder: 164:164 BC_REQUEST_DEATH_NOTIFICATION death notification already set |
| <6>[ 12.999481] [1: system_server: 715] [c1] !@Battery capacity = 260000 |
| <6>[ 13.006744] [0: healthd: 161] [c0] BatteryPropertiesRegistrar: registerListener : start |
| <6>[ 13.008209] [0: healthd: 161] [c0] sec-battery sec-battery.27: sec_bat_show_attrs: show attr offset : 59. |
| <3>[ 13.008239] [0: healthd: 161] [c0] sec_bat_show_attrs: Fail to battery->pdata->fuelgauge_name get (39=>-22) |
| <6>[ 13.008483] [0: healthd: 161] [c0] sec-battery sec-battery.27: sec_bat_show_attrs: show attr offset : 32. |
| <6>[ 13.008605] [0: healthd: 161] [c0] healthd: battery l=64 v=3946 t=25.7 h=2 st=2 c=0 o=4 ca=118 ct=1 ps=0 hv=0 chg=u |
| <6>[ 13.008636] [0: healthd: 161] [c0] BatteryPropertiesRegistrar: notifyListeners : start |
| <6>[ 13.008666] [0: healthd: 161] [c0] IBatteryPropertiesListener : batteryPropertiesChanged! |
| <6>[ 13.008666] [0: healthd: 161] : BatteryPropertiesRegistrar: notifyListeners : done |
| <6>[ 13.009185] [0: healthd: 161] [c0] BatteryPropertiesRegistrar: registerListener : done |
| <6>[ 13.009368] [2: Binder_1: 727] [c2] !@BatteryListener : batteryPropertiesChanged! |
| <6>[ 13.011596] [2: Binder_1: 727] [c2] !@[BatteryInfo] type : 1, read from efs = 431 |
| <6>[ 13.012451] [2: Binder_1: 727] [c2] !@[BatteryInfo] type : 2, read from efs = 950 |
| <6>[ 13.829162] [3: AudioOut_2: 465] [c3] [ASoC: PCM ] E |
| <6>[ 13.829437] [3: AudioOut_2: 465] [c3] [ASoC: PCM ] VBC Close Playback |
| <6>[ 13.829711] [3: AudioOut_2: 465] [c3] [ASoC:CDCV4] inter PA Switch Off |
| <6>[ 13.834655] [3: AudioOut_2: 465] [c3] [ASoC:CDCV4] switch_event Switch DACR(on) Event is PRE_PMD |
| <6>[ 13.834716] [3: AudioOut_2: 465] [c3] [ASoC:CDCV4] switch_event Switch DACL(on) Event is PRE_PMD |
| <3>[ 13.834747] [3: AudioOut_2: 465] [c3] [ASoC:CDCV4] is_low_power_support, chip_id=0x2723, ver_id=0x90 |
| <3>[ 13.834808] [3: AudioOut_2: 465] [c3] [ASoC:CDCV4] is_low_power_support, chip_id=0x2723, ver_id=0x90 |
| <6>[ 13.834960] [3: AudioOut_2: 465] [c3] [ASoC:CDCV4] DAC Off |
| <6>[ 13.915954] [0: lmkd: 163] [c0] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj: |
| <6>[ 13.915985] [0: lmkd: 163] [c0] lowmemorykiller: oom_adj 0 => oom_score_adj 0 |
| <6>[ 13.915985] [0: lmkd: 163] [c0] lowmemorykiller: oom_adj 1 => oom_score_adj 58 |
| <6>[ 13.916015] [0: lmkd: 163] [c0] lowmemorykiller: oom_adj 2 => oom_score_adj 117 |
| <6>[ 13.916015] [0: lmkd: 163] [c0] lowmemorykiller: oom_adj 3 => oom_score_adj 176 |
| <6>[ 13.916046] [0: lmkd: 163] [c0] lowmemorykiller: oom_adj 9 => oom_score_adj 529 |
| <6>[ 13.916046] [0: lmkd: 163] [c0] lowmemorykiller: oom_adj 15 => oom_score_adj 1000 |
| <6>[ 14.043334] [0: pkgld: 240] [c0] sdcardfs: inotify event: 00000400 |
| <6>[ 14.043395] [0: pkgld: 240] [c0] sdcardfs: inotify event: 00008000 |
| <6>[ 14.043426] [0: pkgld: 240] [c0] sdcardfs: read_package_list |
| <4>[ 14.236389] I[0: swapper/0: 0] [c0] RTC ***** interrupt happen |
| <6>[ 14.736846] [2: kworker/u8:3: 131] [c2] sec_hal_fg_get_property-13,val->intval = 3970 |
| <6>[ 14.736877] [2: kworker/u8:3: 131] [c2] sec_hal_fg_get_property-14,val->intval = 3970 |
| <6>[ 14.736907] [2: kworker/u8:3: 131] [c2] sprdfgu: rint:200,value.intval:257 |
| <6>[ 14.736938] [2: kworker/u8:3: 131] [c2] sec_hal_fg_get_property-14,val->intval = 3921 |
| <6>[ 14.736968] [2: kworker/u8:3: 131] [c2] sec_hal_fg_get_property-19,val->intval = 249 |
| <6>[ 14.736999] [2: kworker/u8:3: 131] [c2] sec_hal_fg_get_property-20,val->intval = 249 |
| <6>[ 14.737121] [2: kworker/u8:3: 131] [c2] read channel [1508] |
| <6>[ 14.737213] [2: kworker/u8:3: 131] [c2] read channel [1508] |
| <6>[ 14.737304] [2: kworker/u8:3: 131] [c2] read channel [1508] |
| <6>[ 14.737396] [2: kworker/u8:3: 131] [c2] read channel [1508] |
| <6>[ 14.737518] [2: kworker/u8:3: 131] [c2] read channel [1508] |
| <6>[ 14.737548] [2: kworker/u8:3: 131] [c2] sec-battery sec-battery.27: sec_bat_get_temperature_by_adc: Temp(257), Temp-ADC(1508) |
| <6>[ 14.737640] [2: kworker/u8:3: 131] [c2] read channel [1508] |
| <6>[ 14.737731] [2: kworker/u8:3: 131] [c2] read channel [1508] |
| <6>[ 14.737854] [2: kworker/u8:3: 131] [c2] read channel [1508] |
| <6>[ 14.737945] [2: kworker/u8:3: 131] [c2] read channel [1508] |
| <6>[ 14.738037] [2: kworker/u8:3: 131] [c2] read channel [1507] |
| <6>[ 14.738067] [2: kworker/u8:3: 131] [c2] sec-battery sec-battery.27: sec_bat_get_temperature_by_adc: Temp(257), Temp-ADC(1508) |
| <6>[ 14.738098] [2: kworker/u8:3: 131] [c2] sprdfgu: sprdfgu_read_soc delta 0mAh,sprdfgu_data.init_clbcnt:32683622 |
| <6>[ 14.738128] [2: kworker/u8:3: 131] [c2] sprdfgu: sprdfgu_read_soc delta capacity 0,full capacity 2600 |
| <6>[ 14.738128] [2: kworker/u8:3: 131] [c2] sprdfgu: sprdfgu_read_soc soc 64,sprdfgu_data.init_cap 64 |
| <6>[ 14.738159] [2: kworker/u8:3: 131] [c2] sprdfgu: rint:200,value.intval:257 |
| <6>[ 14.739166] [2: kworker/u8:3: 131] [c2] SM5701_get_charging_status : SM5701_STATUS2 : 0x08 |
| <6>[ 14.741119] [2: kworker/u8:3: 131] [c2] sprdfgu: cnom_temp 2600, delta_soc 0,comp_soc64,soc 64,temp 25 |
| <6>[ 14.741149] [2: kworker/u8:3: 131] [c2] fgu_capacity: = 64,flush_time: = 14,period_time:=10 |
| <6>[ 14.741180] [2: kworker/u8:3: 131] [c2] sec_hal_fg_get_property-45,val->intval = 640 |
| <6>[ 14.741210] [2: kworker/u8:3: 131] [c2] sec-battery sec-battery.27: sec_bat_get_battery_info:Vnow(3970mV),Inow(249mA),Imax(460mA),SOC(64%),Tbat(257),Tchg(0),is_hc_usb(0) |
| <6>[ 14.742309] [2: kworker/u8:3: 131] [c2] SM5701_get_battery_present: SM5701_STATUS1 (0x24) |
| <6>[ 14.742340] [2: kworker/u8:3: 131] [c2] sec-battery sec-battery.27: sec_bat_battery_cable_check: Battery Connected |
| <6>[ 14.742370] [2: kworker/u8:3: 131] [c2] sec-battery sec-battery.27: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), level(100%) |
| <6>[ 14.745269] [2: healthd: 161] [c2] sec-battery sec-battery.27: sec_bat_show_attrs: show attr offset : 59. |
| <3>[ 14.745330] [2: healthd: 161] [c2] sec_bat_show_attrs: Fail to battery->pdata->fuelgauge_name get (39=>-22) |
| <6>[ 14.745605] [2: healthd: 161] [c2] sec-battery sec-battery.27: sec_bat_show_attrs: show attr offset : 32. |
| <6>[ 14.745758] [2: healthd: 161] [c2] healthd: battery l=64 v=3970 t=25.7 h=2 st=2 c=0 o=4 ca=249 ct=1 ps=0 hv=0 chg=u |
| <6>[ 14.745788] [2: healthd: 161] [c2] BatteryPropertiesRegistrar: notifyListeners : start |
| <6>[ 14.745849] [2: healthd: 161] [c2] IBatteryPropertiesListener : batteryPropertiesChanged! |
| <6>[ 14.745849] [2: healthd: 161] : BatteryPropertiesRegistrar: notifyListeners : done |
| <6>[ 14.746612] [3: Binder_2: 728] [c3] !@BatteryListener : batteryPropertiesChanged! |
| <6>[ 14.747619] [3: Binder_2: 728] [c3] !@[BatteryInfo] type : 2, read from efs = 950 |
| <7>[ 15.384826] [2: system_server: 715] [c2] usb: state_show buf=DISCONNECTED |
| <6>[ 15.386840] [2: system_server: 715] [c2] acc_open |
| <6>[ 15.386871] [2: system_server: 715] [c2] acc_release |
| <6>[ 15.896240] [0: Thread-96: 812] [c0] gen_panel_backlight_set_brightness: brightness(255), tune_level(30) |
| <6>[ 15.896331] [0: Thread-96: 812] [c0] ktd3102_set_bl_level: pre lev=17, cur lev=30, pulse=19 |
| <6>[ 15.896392] [2:BlankUnblankInS: 751] [c2] !@display_state: UNKNOWN -> ON |
| <6>[ 15.927612] [2: system_server: 715] [c2] !@Led Charging Settings = true |
| <6>[ 15.927673] [2: system_server: 715] [c2] !@Led Low Battery Settings = false |
| <6>[ 15.929260] [2: system_server: 715] [c2] !@AdaptiveFastCharging Settings = true |
| <6>[ 16.777465] [3: watchdog: 966] [c3] !@Sync 0 [09-13 11:50:15.928] |
| <6>[ 16.894561] [1: kworker/1:1: 58] [c1] usb_notify: reserve_state_check booting delay finished |
| <6>[ 16.894622] [1: kworker/1:1: 58] [c1] usb_notify: reserve_state_check event=vbus(1) enable=1 |
| <6>[ 16.894622] [1: kworker/1:1: 58] [c1] usb_notify: otg_notifier_callback event=vbus(1) |
| <6>[ 16.894683] [2: kworker/u8:3: 131] [c2] usb_notify: otg_notify_state+ event=vbus(1), enable=on |
| <6>[ 16.894714] [2: kworker/u8:3: 131] [c2] usb_notifier: dwc3_set_peripheral+ enable=1 |
| <6>[ 16.894744] [2: kworker/u8:3: 131] [c2] usb: dwc_peripheral_start d->vbus=0, enable=1 |
| <6>[ 16.894744] [2: kworker/u8:3: 131] [c2] udc_enable |
| <6>[ 16.894805] [2: kworker/u8:3: 131] [c2] regu: @@@ldo_turn_on: regu 0xee94726c (vddusb), turn on |
| <4>[ 16.920593] I[0: servicemanager: 164] [c0] SRP: Device mode |
| <6>[ 16.920623] [2: kworker/u8:3: 131] [c2] usb_notifier: dwc3_set_peripheral- |
| <6>[ 16.920654] [2: kworker/u8:3: 131] [c2] usb_notify: otg_notify_state- event=vbus, cable=vbus |
| <4>[ 17.106933] I[0: Binder_1: 727] [c0] lx_state = 2 ep0_state = 0 addr = 0x0 USB RESET |
| <4>[ 17.161712] I[0:FinalizerDaemon: 1023] [c0] SPEED ENUM |
| <7>[ 17.176940] I[0: swapper/0: 0] [c0] usb: GET_DES |
| <7>[ 17.177093] [0: kworker/0:0: 4] [c0] usb: android_work config= (null),connected=1,sw_connected=0 |
| <7>[ 17.178100] [0: kworker/0:0: 4] [c0] usb: android_work sent uevent USB_STATE=CONNECTED |
| <7>[ 17.182678] I[0: ncymode.servic: 1063] [c0] usb: set_config_number single config num=0 |
| <7>[ 17.182739] I[0: ncymode.servic: 1063] [c0] usb: set_interface_count next_interface_id=2 |
| <7>[ 17.183197] I[0: system_server: 715] [c0] usb: set_config_number single config num=0 |
| <7>[ 17.183258] I[0: system_server: 715] [c0] usb: set_interface_count next_interface_id=2 |
| <6>[ 17.248443] I[0:.gms.persistent: 1005] [c0] android_usb gadget: high-speed config #1: android |
| <7>[ 17.248474] I[0:.gms.persistent: 1005] [c0] usb: set_config e mtp[0] |
| <7>[ 17.248535] I[0:.gms.persistent: 1005] [c0] usb: set_config e Function FS Gadget[1] |
| <7>[ 17.248565] I[0:.gms.persistent: 1005] [c0] usb: SET_CON |
| <7>[ 17.248748] [0: kworker/0:0: 4] [c0] usb: android_work config=c0b87f70,connected=1,sw_connected=1 |
| <7>[ 17.250915] [0: kworker/0:0: 4] [c0] usb: android_work sent uevent USB_STATE=CONFIGURED |
| <6>[ 17.289581] [2: system_server: 715] [c2] !@Boot: Loop forever |
| <6>[ 17.290008] [2: system_server: 715] [c2] !@[BatteryInfo] InitBatteryInfo() |
| <6>[ 17.291717] [2: system_server: 715] [c2] sec-battery sec-battery.27: sec_bat_show_attrs: show attr offset : 26. |
| <6>[ 18.529144] [3: Binder_3: 815] [c3] ion_system_heap_allocate, size: 3686400, time: 2319 us |
| <6>[ 19.267974] [3: Binder_2: 247] [c3] ion_system_heap_allocate, size: 2076672, time: 1648 us |
| <6>[ 19.279357] [2: Binder_3: 815] [c2] ion_system_heap_allocate, size: 2076672, time: 1312 us |
| <6>[ 19.281188] [2: Binder_3: 815] [c2] ion_system_heap_allocate, size: 2076672, time: 1373 us |
| <6>[ 19.287384] [2: Binder_3: 815] [c2] ion_system_heap_allocate, size: 2076672, time: 5768 us |
| <6>[ 19.651397] [1:android.display: 746] [c1] !@performEnableScreen return becase KeyguardScrim android is not fully drawn! |
| <6>[ 19.668334] [0:ActivityManager: 741] [c0] !@performEnableScreen return becase KeyguardScrim android is not fully drawn! |
| <6>[ 19.766113] [2: Binder_5: 1267] [c2] ion_system_heap_allocate, size: 2076672, time: 1526 us |
| <6>[ 19.851745] [1: BootAnimation: 380] [c1] !@BootAnimation : service.bootanim.exit = 1 |
| <6>[ 19.851837] [1: BootAnimation: 380] [c1] !@BootAnimation : service.bootanim.exit = 1 |
| <6>[ 19.855957] [1: BootAnimation: 380] [c1] !@BootAnimation : doCleanup() Call |
| <6>[ 19.860656] [2: BootAnimation: 380] [c2] !@BootAnimation : stopProcess() Call |
| <6>[ 19.860839] [2: BootAnimation: 380] [c2] !@BootAnimation : kill() Call |
| <6>[ 19.941406] [3:android.display: 746] [c3] !@performEnableScreen return becase StatusBar com.android.systemui is not fully drawn! |
| <6>[ 19.941619] [3:android.display: 746] [c3] !@performEnableScreen return becase StatusBar com.android.systemui is not fully drawn! |
| <6>[ 19.951599] [3:android.display: 746] [c3] !@performEnableScreen return becase StatusBar com.android.systemui is not fully drawn! |
| <6>[ 19.975891] [3: Binder_3: 815] [c3] ion_system_heap_allocate, size: 77824, time: 0 us |
| <6>[ 19.981048] [3: Binder_1: 246] [c3] ion_system_heap_allocate, size: 77824, time: 0 us |
| <6>[ 19.981292] [3: Binder_1: 246] [c3] ion_system_heap_allocate, size: 77824, time: 30 us |
| <6>[ 19.981445] [3: Binder_1: 246] [c3] ion_system_heap_allocate, size: 77824, time: 31 us |
| <6>[ 20.019714] [1:android.display: 746] [c1] !@performEnableScreen return becase StatusBar com.android.systemui is not fully drawn! |
| <6>[ 20.025115] [1:android.display: 746] [c1] !@performEnableScreen return becase StatusBar com.android.systemui is not fully drawn! |
| <6>[ 20.067810] [1:android.display: 746] [c1] !@performEnableScreen return becase StatusBar com.android.systemui is not fully drawn! |
| <6>[ 20.117828] [1:android.display: 746] [c1] !@performEnableScreen return becase StatusBar com.android.systemui is not fully drawn! |
| <6>[ 20.348907] [1:android.display: 746] [c1] !@performEnableScreen return becase StatusBar com.android.systemui is not fully drawn! |
| <3>[ 20.426818] [0: surfaceflinger: 166] [c0] ion_invalidate_for_cpu: dmabuf is error and dmabuf is fffffff7! |
| <4>[ 20.441375] [2: surfaceflinger: 166] [c2] sprdfb: free logo proc buffer! |
| <6>[ 21.140411] [2: Binder_1: 246] [c2] ion_system_heap_allocate, size: 2076672, time: 2350 us |
| <6>[ 21.361663] [3:android.display: 746] [c3] !@Boot: Enabling Screen! |
| <6>[ 21.384948] [2: system_server: 715] [c2] !@bootCompleted |
| <6>[ 21.573059] [3:android.display: 746] [c3] !@Boot: bootcomplete |
| <6>[ 22.134613] [3: Binder_1: 727] [c3] [SENSOR] k2hh_set_odr - change odr 3 |
| <6>[ 22.134643] [3: Binder_1: 727] [c3] [SENSOR]: k2hh_delay_store - poll_delay = 200000000 |
| <6>[ 22.135345] [2: Binder_1: 727] [c2] [SENSOR] k2hh_regulator_onoff |
| <3>[ 22.135650] [2: Binder_1: 727] [c2] [SENSOR] k2hh_open_calibration - No Calibration |
| <6>[ 22.136474] [2: Binder_1: 727] [c2] [SENSOR] k2hh_set_range - 0x20 |
| <6>[ 22.138763] [2: Binder_1: 727] [c2] [SENSOR] k2hh_set_mode - change mode 1 |
| <6>[ 22.175750] [1: Binder_1: 246] [c1] ion_system_heap_allocate, size: 2076672, time: 31 us |