[    0.479194] c0     52 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[    0.479207] c0     52 i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
[    0.480366] c0     52 i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
[    0.480489] c0     52 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[    0.480503] c0     52 i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
[    0.481734] c0     52 cpu-clock-8996 6400000.qcom,cpu-clock-8996: using perf/pwr/cbf speed bin 1 and pvs_ver 0
[    0.484091] c0     52 clock-cpu-8996: set OPP pair (307200000 Hz, 550000 uv) on cpu0
[    0.484146] c0     52 clock-cpu-8996: set OPP pair (1593600000 Hz, 810000 uv) on cpu0
[    0.484168] c0     52 clock-cpu-8996: set OPP pair (307200000 Hz, 550000 uv) on cpu1
[    0.484206] c0     52 clock-cpu-8996: set OPP pair (1593600000 Hz, 810000 uv) on cpu1
[    0.484225] c0     52 clock-cpu-8996: set OPP pair (307200000 Hz, 550000 uv) on cpu2
[    0.484330] c0     52 clock-cpu-8996: set OPP pair (2150400000 Hz, 970000 uv) on cpu2
[    0.484352] c0     52 clock-cpu-8996: set OPP pair (307200000 Hz, 550000 uv) on cpu3
[    0.484407] c0     52 clock-cpu-8996: set OPP pair (2150400000 Hz, 970000 uv) on cpu3
[    0.484553] c0     52 clock-cpu-8996: set OPP pair (192000000 Hz, 535000 uv) on soc:qcom,m4m
[    0.484597] c0     52 clock-cpu-8996: set OPP pair (1593600000 Hz, 910000 uv) on soc:qcom,m4m
[    0.485061] c0     52 qcom,gpucc-8996 8c0000.qcom,gpucc: using speed bin 1
[    0.485504] c0     52 gfx3d_clk_src_v2: set OPP pair(133000000 Hz: 540000 uV) on b00000.qcom,kgsl-3d0
[    0.485534] c0     52 gfx3d_clk_src_v2: set OPP pair(624000000 Hz: 880000 uV) on b00000.qcom,kgsl-3d0
[    0.487141] c0     52 qcom,gpucc-8996 8c0000.qcom,gpucc: Registered GPU clocks.
[    0.487389] c0     52 pmi8994_boost_5v: no parameters
[    0.487495] c0     52 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
[    0.487595] c0     52 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
[    0.487822] c0     52 pmi8994_boost_pin_ctrl: no parameters
[    0.487900] c0     52 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
[    0.487992] c0     52 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
[    0.489154] c0     52 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
[    0.489182] c0     52 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
[    0.489195] c0     52 msm_thermal:sensor_mgr_init_threshold threshold id already initialized
[    0.489213] c0     52 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
[    0.489230] c0     52 msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
[    0.489600] c0     52 msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
[    0.489617] c0     52 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
[    0.489629] c0     52 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
[    0.489653] c0     52 msm-thermal 70000.qcom,msm-thermal: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-opt-curr-temp err:-22. KTM continues
[    0.490851] c0      4 msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
[    0.490926] c0      4 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
[    0.490939] c0      4 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
[    0.491207] c0     52 pmi8994_boost_5v: no parameters
[    0.491340] c0     52 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
[    0.491440] c0     52 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
[    0.491671] c0     52 pmi8994_boost_pin_ctrl: no parameters
[    0.491750] c0     52 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
[    0.491840] c0     52 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
[    0.539960] c0      1 KPI: Bootloader start count = 32746
[    0.539980] c0      1 KPI: Bootloader end count = 79711
[    0.539990] c0      1 KPI: Bootloader display count = 46784
[    0.540000] c0      1 KPI: Bootloader load kernel count = 3022
[    0.540011] c0      1 KPI: Kernel MPM timestamp = 106988
[    0.540680] c0      1 KPI: Kernel MPM Clock frequency = 32768
[    0.540711] c0      1 socinfo_print: v0.11, id=305, ver=1.1, raw_id=95, raw_ver=1, hw_plat=1, hw_plat_ver=65536
[    0.540711] c0      1  accessory_chip=0, hw_plat_subtype=0, pmic_model=65545, pmic_die_revision=131072 foundry_id=3 serial_number=1008323382 num_pmics=2
[    0.541044] c0      1 gdsc_mmagic_bimc: no parameters
[    0.541977] c0      1 usb_otg_vreg: no parameters
[    0.542061] c0      1 reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
[    0.542165] c0      1 reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
[    0.542369] c0      1 rome_vreg: no parameters
[    0.543205] c0      1 vgaarb: loaded
[    0.545171] c0      1 SCSI subsystem initialized
[    0.546535] c0      1 usbcore: registered new interface driver usbfs
[    0.546583] c0      1 usbcore: registered new interface driver hub
[    0.546798] c0      1 usbcore: registered new device driver usb
[    0.547335] c0      1 soc:usb_nop_phy supply vcc not found, using dummy regulator
[    0.548228] c0      1 media: Linux media interface: v0.10
[    0.548284] c0      1 Linux video capture interface: v2.00
[    0.550907] c0      1 cpufreq: driver msm up and running
[    0.552705] c0      1 platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region
[    0.553558] c0      1 platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_region
[    0.554380] c0      1 ION heap system created
[    0.554507] c0      1 ion_heap_create: Heap type is disabled: 1
[    0.554516] c0      1 msm_ion_heap_create: error creating heap kmalloc type 1 base 0x0000000000000000 size 0
[    0.554523] c0      1 ION heap adsp created at 0x00000000f6800000 with size 2000000
[    0.554533] c0      1 ION heap qsecom created at 0x00000000fe400000 with size 1400000
[    0.554544] c0      1 ION heap secure_display created at 0x00000000f8800000 with size 5c00000
[    0.554590] c0      1 ION heap secure_heap created
[    0.555678] c0      1 msm_bus_fabric_init_driver
[    0.560460] c0      1 msm-bus-type fab-a0noc: Error: Failed to get regulator bus-gdsc:-517
[    0.560481] c0      1 msm-bus-type fab-a0noc: Error: Failed to get regulator bus-a-gdsc:-517
[    0.564298] c0      1 msm-bus-type slv-vmem-cfg: Error: Failed to get regulator node-gdsc:-517
[    0.564917] c0      1 msm-bus-type slv-vmem: Error: Failed to get regulator node-gdsc:-517
[    0.572331] c0      1 msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
[    0.572353] c0      1 msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
[    0.572366] c0      1 msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
[    0.572514] c0      1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
[    0.572543] c0      1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
[    0.572568] c0      1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
[    0.572593] c0      1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
[    0.572618] c0      1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
[    0.572641] c0      1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
[    0.572666] c0      1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
[    0.575508] c0      1 qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
[    0.575535] c0      1 qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
[    0.575702] c0      1 input: qpnp_pon as /devices/virtual/input/input0
[    0.576423] c0      1 pon_spare_reg: no parameters
[    0.576497] c0      1 qcom,qpnp-power-on qpnp-power-on-11: No PON config. specified
[    0.576555] c0      1 qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2 Power-on reason: Triggered from USB (USB charger insertion) and 'cold' boot
[    0.576573] c0      1 qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
[    0.576800] c0      1 PMIC@SID0: PM8994 v2.0 options: 0, 0, 2, 2
[    0.576892] c0      1 PMIC@SID2: PMI8996 v1.1 options: 0, 0, 0, 0
[    0.578508] c0      1 ipa ipa2_uc_state_check:296 uC interface not initialized
[    0.578525] c0      1 ipa ipa_sps_irq_control_all:937 EP (2) not allocated.
[    0.578531] c0      1 ipa ipa_sps_irq_control_all:937 EP (5) not allocated.
[    0.580809] c0      1 sps:BAM 0x0000000000684000 is registered.
[    0.581999] c0      1 ipa ipa2_uc_state_check:296 uC interface not initialized
[    0.582253] c0      1 sps:BAM 0x0000000000684000 (va:0xffffff80017c0000) enabled: ver:0x27, number of pipes:20
[    0.587924] c0      1 ipa ipa2_uc_state_check:296 uC interface not initialized
[    0.598063] c0      1 ipa ipa2_uc_state_check:296 uC interface not initialized
[    0.600653] c0      1 IPA driver initialization was successful.
[    0.602226] c0      1 gdsc_mmagic_video: no parameters
[    0.602606] c0      1 gdsc_mmagic_mdss: no parameters
[    0.602904] c0      1 gdsc_mmagic_camss: no parameters
[    0.603276] c0      1 gdsc_venus: no parameters
[    0.603313] c0      1 gdsc_venus: supplied by gdsc_mmagic_video
[    0.603887] c0      1 gdsc_venus_core0: fast normal 
[    0.604164] c0      1 gdsc_venus_core1: fast normal 
[    0.604420] c0      1 gdsc_camss_top: no parameters
[    0.604456] c0      1 gdsc_camss_top: supplied by gdsc_mmagic_camss
[    0.604745] c0      1 gdsc_vfe0: no parameters
[    0.604777] c0      1 gdsc_vfe0: supplied by gdsc_camss_top
[    0.605075] c0      1 gdsc_vfe1: no parameters
[    0.605105] c0      1 gdsc_vfe1: supplied by gdsc_camss_top
[    0.605358] c0      1 gdsc_mdss: no parameters
[    0.605398] c0      1 gdsc_mdss: supplied by gdsc_mmagic_mdss
[    0.605858] c0      1 gdsc_jpeg: no parameters
[    0.605888] c0      1 gdsc_jpeg: supplied by gdsc_camss_top
[    0.606195] c0      1 gdsc_cpp: no parameters
[    0.606225] c0      1 gdsc_cpp: supplied by gdsc_camss_top
[    0.606440] c0      1 gdsc_pcie_0: no parameters
[    0.606635] c0      1 gdsc_pcie_1: no parameters
[    0.606979] c0      1 gdsc_pcie_2: no parameters
[    0.607170] c0      1 gdsc_usb30: no parameters
[    0.607375] c0      1 gdsc_ufs: no parameters
[    0.607776] c0      1 gdsc_fd: no parameters
[    0.607808] c0      1 gdsc_fd: supplied by gdsc_camss_top
[    0.608025] c0      1 gdsc_gpu: no parameters
[    0.608328] c0      1 gdsc_gpu_gx: no parameters
[    0.608718] c0      1 gdsc_gpu_gx: supplied by gfx_corner
[    0.609086] c0      1 gdsc_hlos1_vote_aggre0_noc: no parameters
[    0.609298] c0      1 gdsc_hlos1_vote_lpass_adsp: no parameters
[    0.609488] c0      1 gdsc_hlos1_vote_lpass_core: no parameters
[    0.609695] c0      1 gdsc_aggre0_noc: no parameters
[    0.612586] c0      1 mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
[    0.612653] c0      1 mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
[    0.615647] c0      1 dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully
[    0.615803] c0      1 mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
[    0.615819] c0      1 mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
[    0.617014] c0      1 pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock
[    0.617725] c0      1 dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully
[    0.617812] c0      1 mdss_pll_probe: MDSS pll label = MDSS HDMI PLL
[    0.617825] c0      1 mdss_pll_probe: Unable to get the cell-index rc=-22
[    0.819694] c0      1 esoc bus registration done
[    0.819789] c0      1 Advanced Linux Sound Architecture Driver Initialized.
[    0.820610] c0      1 Bluetooth: ffffffc0f983fcf8
[    0.820674] c0      1 NET: Registered protocol family 31
[    0.820688] c0      1 Bluetooth: ffffffc0f983fcf8
[    0.820701] c0      1 Bluetooth: ffffffc0f983fcd8Bluetooth: ffffffc0f983fca8
[    0.820748] c0      1 Bluetooth: ffffffc0f983fcb8<6>[    0.821261] c0      4 cfg80211: Calling CRDA to update world regulatory domain
[    0.821303] c0      4 cfg80211: World regulatory domain updated:
[    0.821314] c0      4 cfg80211:  DFS Master region: unset
[    0.821323] c0      4 cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    0.821339] c0      4 cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    0.821348] c0      4 cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    0.821357] c0      4 cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    0.821365] c0      4 cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    0.821374] c0      4 cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    0.821382] c0      4 cfg80211:   (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    0.821390] c0      4 cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    0.821399] c0      4 cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    0.821872] c0      1 pcie:pcie_init.
[    0.826660] c0      1 600000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
[    0.830867] c0      1 msm_pcie_get_resources: PCIe: RC0 can't get tcsr resource.
[    0.834442] c1     52 pmi8994_boost_5v: no parameters
[    0.834920] c1     52 pmi8994_boost_5v: supplied by pon_spare_reg
[    0.835461] c1     52 pmi8994_boost_pin_ctrl: no parameters
[    0.835666] c1     52 pmi8994_boost_pin_ctrl: supplied by pon_spare_reg
[    0.836317] c1     52 ibb_reg: 4600 <--> 6000 mV at 5500 mV 
[    0.836835] c1     52 lab_reg: 4600 <--> 6000 mV at 5500 mV 
[    0.837577] c1     52 usb_otg_vreg: no parameters
[    0.837734] c1     52 reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
[    0.837866] c1     52 reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
[    0.839510] c0      1 Switched to clocksource arch_sys_counter
[    0.872524] c0      1 bcl_peripheral:bcl_perph_init BCL Initialized
[    0.882199] c0      1 NET: Registered protocol family 2
[    0.883086] c0      1 TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.883209] c0      1 TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.883968] c0      1 TCP: Hash tables configured (established 32768 bind 32768)
[    0.884184] c0      1 TCP: reno registered
[    0.884214] c0      1 UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.884259] c0      1 UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.884698] c0      1 NET: Registered protocol family 1
[    0.884769] c0      1 PCI: CLS 0 bytes, default 128
[    0.886060] c1     52 usb_otg_vreg: no parameters
[    0.886237] c1     52 reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
[    0.886357] c1     52 reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
[    0.889486] c0      1 kryo perfevents: CPU pmu for kryo-pmuv3 detected
[    0.897194] c1      1 futex hash table entries: 1024 (order: 5, 131072 bytes)
[    0.897341] c1      1 Initialise system trusted keyring
[    0.897436] c1      1 audit: initializing netlink subsys (disabled)
[    0.897582] c1      1 audit: type=2000 audit(0.896:1): initialized
[    0.898657] c1      1 vmscan: error setting kswapd cpu affinity mask
[    0.903875] c1      1 Registering sdcardfs 0.1
[    0.904127] c1      1 fuse init (API version 7.23)
[    0.904409] c1      1 SELinux:  Registering netfilter hooks
[    0.904836] c1      1 pfk [pfk_init]: Driver initialized successfully
[    0.907444] c1      1 Key type asymmetric registered
[    0.907479] c1      1 Asymmetric key parser 'x509' registered
[    0.907492] c1      1 Key type pkcs7_test registered
[    0.907764] c1      1 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.907783] c1      1 io scheduler noop registered
[    0.907796] c1      1 io scheduler deadline registered
[    0.907925] c1      1 io scheduler cfq registered (default)
[    0.907940] c1      1 io scheduler test-iosched registered
[    0.927974] c1      1 mdss_mdp_irq_clk_register: unable to get clk: lut_clk
[    0.929651] c1      1 No change in context(0==0), skip
[    0.930989] c1      1 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
[    0.931007] c1      1 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:4 num:1 rect:0 ndx:0x2 prio:1
[    0.931015] c1      1 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:8 num:2 rect:0 ndx:0x4 prio:2
[    0.931023] c1      1 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:12 num:8 rect:0 ndx:0x100 prio:3
[    0.931042] c1      1 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:4
[    0.931049] c1      1 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:5
[    0.931056] c1      1 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:9 num:5 rect:0 ndx:0x20 prio:6
[    0.931063] c1      1 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:13 num:9 rect:0 ndx:0x200 prio:7
[    0.931079] c1      1 mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:8
[    0.931087] c1      1 mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:10 num:7 rect:0 ndx:0x80 prio:9
[    0.931104] c1      1 mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
[    0.931111] c1      1 mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:11 rect:0 ndx:0x800 prio:1
[    0.931124] c1      1 mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
[    0.931215] c1      1 mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
[    0.931875] c1      1 xlog_status: enable:1, panic:1, dump:2
[    0.932228] c1      1 OF: no ranges; cannot translate
[    0.932246] c1      1 OF: no ranges; cannot translate
[    0.933040] c1      1 OF: no ranges; cannot translate
[    0.933060] c1      1 OF: no ranges; cannot translate
[    0.933637] c1      1 OF: no ranges; cannot translate
[    0.933660] c1      1 OF: no ranges; cannot translate
[    0.934126] c1      1 OF: no ranges; cannot translate
[    0.934143] c1      1 OF: no ranges; cannot translate
[    0.934602] c1      1 mdss_mdp_probe: mdss version = 0x10070002, bootloader display is on, num 1, intf_sel=0x00000100
[    0.936450] c1      1 mdss_rotator_init_queue: work thread name=rot_thread_0
[    0.936828] c1      1 mdss_rotator_init_queue: work thread name=rot_thread_1
[    0.942202] c1      1 mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
[    0.942446] c1      1 mdss_smmu_probe: iommu v2 domain[1] mapping and clk register successful!
[    0.942621] c1      1 mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
[    0.942818] c1      1 mdss_smmu_probe: iommu v2 domain[3] mapping and clk register successful!
[    0.947164] c1      1 mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
[    0.947683] c1      1 mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_samsung_ea8064tg_1080p_cmd:1:none:cfg:single_dsi panel_name:qcom,mdss_dsi_samsung_ea8064tg_1080p_cmd
[    0.947717] c1      1 mdss_dsi_panel_init: Panel Name = S1 FHD SAMSUNG EA8064TG 5.0 command mode panel
[    0.947824] c1      1 mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_samsung_ea8064tg_1080p_cmd" (ffffffc0f983f2d8)
[    0.947844] c1      1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
[    0.947855] c1      1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
[    0.947863] c1      1 mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:
[    0.947951] c1      1 mdss_dsi_parse_panel_features: partial_update_enabled=0
[    0.947962] c1      1 mdss_dsi_parse_panel_features: ulps feature disabled
[    0.947970] c1      1 mdss_dsi_parse_panel_features: ulps during suspend feature disabled
[    0.947979] c1      1 mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
[    0.947996] c1      1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command
[    0.948050] c1      1 mdss_dsi_parse_rgb_gain: PA[0] = 0x2604
[    0.948056] c1      1 mdss_dsi_parse_rgb_gain: PA[1] = 0x12a
[    0.948062] c1      1 mdss_dsi_parse_rgb_gain: PA[2] = 0x107
[    0.948067] c1      1 mdss_dsi_parse_rgb_gain: PA[3] = 0x153
[    0.948074] c1      1 mdss_dsi_parse_rgb_gain: R = 0x122, G = 0xff B = 0x149 
[    0.948343] c1      1 mdss_dsi_parse_ctrl_params:3904 Unable to read qcom,display-id, data=0000000000000000,len=20
[    0.948530] c1      1 mdss_dsi_parse_gpio_params: bklt_en gpio not specified
[    0.948595] c1      1 msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
[    0.948623] c1      1 mdss_dsi_retrieve_ctrl_resources+0x170/0x1f4->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
[    0.948632] c1      1 mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff8001b96000 ctrl_size=400 phy_base=ffffff8001b98400 phy_size=588
[    0.948955] c1      1 dsi_panel_device_register: Continuous splash enabled
[    0.949650] c1      1 mdss_register_panel: adding framebuffer device 994000.qcom,mdss_dsi_ctrl0
[    0.962341] c1      1 mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040001, PHY rev:0x2
[    0.963724] c1      1 mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
[    0.964260] c1      1 mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_samsung_ea8064tg_1080p_cmd:1:none:cfg:single_dsi panel_name:none
[    0.964273] c1      1 mdss_dsi_config_panel: can't find panel node 0:qcom,mdss_dsi_samsung_ea8064tg_1080p_cmd:1:none:cfg:single_dsi
[    0.964280] c1      1 mdss_dsi_ctrl_probe: panel configuration failed
[    0.964315] c1      1 mdss_dsi_ctrl: probe of 996000.qcom,mdss_dsi_ctrl1 failed with error -22
[    0.965990] c1      1 mdss_dsi_status_init: DSI status check interval:3000
[    0.966512] c1      1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins
[    0.966636] c1      1 hdmi_tx_get_dt_data:4349 Unable to read qcom,display-id, data=0000000000000000,len=0
[    0.966838] c1      1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins
[    0.966856] c1      1 hdmi_tx_pinctrl_init: failed to get pinctrl
[    0.966885] c1      1 hdmi_tx_init_resource: 'core_physical': start = 0xffffff8001b9c000, len=0x50c
[    0.966896] c1      1 hdmi_tx_init_resource: 'qfprom_physical': start = 0xffffff8001bb8000, len=0x6158
[    0.966994] c1      1 hdmi_tx_init_resource: 'hdcp_physical': start = 0xffffff8001b9e000, len=0xfff
[    0.968401] c1      1 mdss_register_panel: adding framebuffer device 9a0000.qcom,hdmi_tx
[    0.971610] c1      1 mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
[    0.975296] c1      1 mdss_fb_probe: fb0: split_mode:0 left:0 right:0
[    0.975918] c1      1 mdss_fb_register: FrameBuffer[0] 1080x1920 registered successfully!
[    0.977583] c1      1 mdss_fb_probe: fb1: split_mode:0 left:0 right:0
[    0.977753] c1      1 mdss_fb_register: FrameBuffer[1] 640x480 registered successfully!
[    0.978307] c1      1 input: HDMI CEC User or Deck Control as /devices/virtual/input/input1
[    0.984142] c1      1 mdss_fb_probe: fb2: split_mode:0 left:0 right:0
[    0.984349] c1      1 mdss_fb_register: FrameBuffer[2] 640x480 registered successfully!
[    0.984443] c1      1 mdss_mdp_splash_parse_dt: splash mem child node is not present
[    1.014183] c1      1 In memshare_probe, Memshare probe success
[    1.016898] c1      1 msm_rpmstats_probe: ERROR rpm_stats debugfs_create_file	fail
[    1.016935] c1      1 msm_rpm_stat: probe of 2a1fa0.qcom,rpm-stats failed with error -12
[    1.024915] c1      1 l2cache-pmu soc:l2-pmu: Registered L2 cache PMU using 2 HW PMUs
[    1.026565] c1      1 msm_rpm_log_probe: OK
[    1.028913] c1      1 RPM Version: 148.0.5
[    1.034384] c1      1 subsys-pil-tz ce0000.qcom,venus: for venus segments only will be dumped.
[    1.035553] c1      1 subsys-pil-tz soc:qcom,kgsl-hyp: for a530_zap_signed segments only will be dumped.
[    1.039960] c0      4 smd_channel_probe_now: allocation table not initialized
[    1.040344] c1      1 pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id.
[    1.045705] c1      1 input: qbt1000_key_input as /devices/virtual/input/input2
[    1.048307] c1      1 uart_tx_gpio is not available
[    1.048335] c1      1 uart_rx_gpio is not available
[    1.048342] c1      1 uart_cts_gpio is not available
[    1.048349] c1      1 uart_rfr_gpio is not available
[    1.049718] c1      1 sps: BAM device 0x0000000007544000 is not registered yet.
[    1.049935] c1      1 sps:BAM 0x0000000007544000 is registered.
[    1.051701] c1      1 7570000.uart: ttyHS0 at MMIO 0x7570000 (irq = 18, base_baud = 460800) is a MSM HS UART
[    1.054401] c1      1 msm_serial_hs module loaded
[    1.055465] c1      1 msm_serial_hsl_probe: serial console disabled, do not proceed msm_serial_hsl_probe().
[    1.056983] c1      1 msm_serial_hsl_init: driver initialized
[    1.074166] c2      1 kgsl: use zap firmware : a530_zap_signed
[    1.111542] c2      1 brd: module loaded
[    1.112652] c2      1 loop: module loaded
[    1.112830] c2      1 zram: Created 1 device(s) ...
[    1.114011] c2      1 QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
[    1.114055] c2      1 QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
[    1.114064] c2      1 QSEECOM: qseecom_probe: no-clock-support=0x1<4>[    1.114074] c2      1 QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
[    1.114536] c2      1 QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
[    1.118421] c2      1 fpc1020 soc:fp_fpc1020: found pin control fpc1020_reset_active
[    1.118445] c2      1 fpc1020 soc:fp_fpc1020: found pin control fpc1020_reset_reset
[    1.118451] c2      1 fpc1020 soc:fp_fpc1020: found pin control fpc1020_irq_active
[    1.118486] c2      1 fpc1020 soc:fp_fpc1020: Selected 'fpc1020_reset_reset'
[    1.118503] c2      1 fpc1020 soc:fp_fpc1020: Selected 'fpc1020_irq_active'
[    1.118806] c2      1 fpc1020 soc:fp_fpc1020: fpc1020_probe: ok
[    1.119143] c2      1 i2c-core: driver [tabla-i2c-core] using legacy suspend method
[    1.119148] c2      1 i2c-core: driver [tabla-i2c-core] using legacy resume method
[    1.119209] c2      1 i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
[    1.119215] c2      1 i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
[    1.119262] c2      1 i2c-core: driver [tasha-i2c-core] using legacy suspend method
[    1.119268] c2      1 i2c-core: driver [tasha-i2c-core] using legacy resume method
[    1.121172] c2      1 [NFC] pn551_dev_init: Loading pn551 driver
[    1.121249] c2      1 [NFC] pn551_probe:
[    1.121385] c2      1 [NFC] pn551_probe : vreg_l6 regulator_get
[    1.121410] c2      1 [NFC] pn551_probe : vreg_l6 regulator_set_voltage
[    1.121419] c2      1 [NFC] pn551_probe : vreg_l6 regulator_enable
[    1.121425] c2      1 [NFC] pn551_probe : vreg_l6 regulator_is_enabled = 1
[    1.121432] c2      1 [NFC] pn551_parse_dt: Start
[    1.121440] c2      1 [NFC] pn551_parse_dt:ven_isinvert = 0
[    1.121444] c2      1 [NFC] pn551_parse_dt: chk irq-gpio
[    1.121633] c2      1 [NFC] pn551_parse_dt: chk ven-gpio
[    1.121656] c2      1 [NFC] pn551_parse_dt: chk fwdl-gpio
[    1.121678] c2      1 [NFC] pn551_parse_dt: chk nfc_i2c pins
[    1.121717] c2      1 [NFC] pn551_parse_dt: End, irq_gpio:50, ven_gpio:12, firm_gpio:74
[    1.121740] c2      1 [NFC] pn551_probe : irq_gpio:50, ven_gpio:12, firm_gpio:74, ven_enable:1
[    1.121757] c2      1 [NFC] pn551_probe : irq_gpio set input 0 
[    1.121770] c2      1 [NFC] pn551_probe : ven_gpio set 0 0 
[    1.121779] c2      1 [NFC] pn551_probe : firm_gpio set 0 0 
[    1.121785] c2      1 [NFC] pn551_probe: init io_wake_lock
[    1.121881] c2      1 [NFC] pn551_probe : requesting IRQ 405
[    1.122007] c2      1 [NFC] pn551_probe: Turn off NFC VEN by default
[    1.122014] c2      1 [NFC] pn551_Disable: gpio=12 set_value=0
[    1.122032] c2      1 [NFC] pn551_Disable: [NFC] gpio=12 check ven_gpio value=0
[    1.122037] c2      1 [NFC] pn551_probe: Probe success!
[    1.122057] c2      1 i2c-core: driver [pn551] using legacy suspend method
[    1.122062] c2      1 i2c-core: driver [pn551] using legacy resume method
[    1.123314] c2      1 qce 660000.qcedev: Qualcomm Crypto 5.3.1 device found @0x660000
[    1.123334] c2      1 qce 660000.qcedev: CE device = 0x0
[    1.123334] c2      1 , IO base, CE = 0xffffff8003640000
[    1.123334] c2      1 , Consumer (IN) PIPE 2,    Producer (OUT) PIPE 3
[    1.123334] c2      1 IO base BAM = 0x          (null)
[    1.123334] c2      1 BAM IRQ 247
[    1.123334] c2      1 Engines Availability = 0x2011053
[    1.123633] c2      1 sps:BAM 0x0000000000644000 is registered.
[    1.123877] c2      1 sps:BAM 0x0000000000644000 (va:0xffffff80036c0000) enabled: ver:0x27, number of pipes:16
[    1.124118] c2      1 QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at 0x0000000000644000 irq 247
[    1.132920] c2      1 qcrypto 660000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x660000
[    1.132947] c2      1 qcrypto 660000.qcrypto: CE device = 0x0
[    1.132947] c2      1 , IO base, CE = 0xffffff8003700000
[    1.132947] c2      1 , Consumer (IN) PIPE 4,    Producer (OUT) PIPE 5
[    1.132947] c2      1 IO base BAM = 0x          (null)
[    1.132947] c2      1 BAM IRQ 247
[    1.132947] c2      1 Engines Availability = 0x2011053
[    1.133322] c2      1 QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at 0x0000000000644000 irq 247
[    1.139677] c2      1 qcrypto 660000.qcrypto: qcrypto-ecb-aes
[    1.139805] c2      1 qcrypto 660000.qcrypto: qcrypto-cbc-aes
[    1.139919] c2      1 qcrypto 660000.qcrypto: qcrypto-ctr-aes
[    1.140042] c2      1 qcrypto 660000.qcrypto: qcrypto-ecb-des
[    1.140155] c2      1 qcrypto 660000.qcrypto: qcrypto-cbc-des
[    1.140328] c2      1 qcrypto 660000.qcrypto: qcrypto-ecb-3des
[    1.140411] c2      1 qcrypto 660000.qcrypto: qcrypto-cbc-3des
[    1.140506] c2      1 qcrypto 660000.qcrypto: qcrypto-xts-aes
[    1.140644] c3      1 qcrypto 660000.qcrypto: qcrypto-sha1
[    1.140731] c3      1 qcrypto 660000.qcrypto: qcrypto-sha256
[    1.140822] c3      1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
[    1.140910] c3      1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
[    1.140992] c3      1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
[    1.141075] c3      1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
[    1.141159] c3      1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
[    1.141239] c3      1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
[    1.141322] c3      1 qcrypto 660000.qcrypto: qcrypto-hmac-sha1
[    1.141403] c3      1 qcrypto 660000.qcrypto: qcrypto-hmac-sha256
[    1.141484] c3      1 qcrypto 660000.qcrypto: qcrypto-aes-ccm
[    1.141567] c3      1 qcrypto 660000.qcrypto: qcrypto-rfc4309-aes-ccm
[    1.144768] c3      1 ICE IRQ = 30
[    1.144925] c3      1 qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
[    1.144969] c3      1 ICE IRQ = 31
[    1.149837] c3      1 qcom_ice_get_pdevice: found ice device ffffffc03202a000
[    1.149857] c3      1 qcom_ice_get_pdevice: matching platform device ffffffc0f9233400
[    1.150459] c3      1 scm_call failed: func id 0x42000c02, ret: -2, syscall returns: 0xfffffffffffffffc, 0x0, 0x0
[    1.151079] c3      1 ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get tx_iface_clk err -2
[    1.151089] c3      1 ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get rx_iface_clk err -2
[    1.152170] c3      1 scsi host0: ufshcd
[    1.155823] c3      1 qcom_ice 630000.ufsice: QC ICE 2.1.44 device found @0xffffff8002350000
[    1.161940] c3      1 SCSI Media Changer driver v0.25 
[    1.164003] c3      1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins
[    1.166283] c3      1 spi_master spi6: will run message pump with realtime priority
[    1.167885] c3      1 sps:BAM 0x0000000007544000 (va:0xffffff80024c0000) enabled: ver:0x19, number of pipes:24
[    1.168692] c3      1 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[    1.169771] c3      1 tun: Universal TUN/TAP device driver, 1.6
[    1.169779] c3      1 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.169840] c3      1 PPP generic driver version 2.4.2
[    1.169908] c3      1 PPP BSD Compression module registered
[    1.169917] c3      1 PPP Deflate Compression module registered
[    1.169947] c3      1 PPP MPPE Compression module registered
[    1.169958] c3      1 NET: Registered protocol family 24
[    1.179461] c1     52 ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
[    1.203394] c3      1 msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
[    1.207226] c3      1 msm_pcie_enable: PCIe RC0 PHY is ready!
[    1.217330] c3      1 msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
[    1.259343] c3      1 msm_pcie_enable: PCIe RC0 link initialized
[    1.259461] c3      1 PCI host bridge /soc/qcom,pcie@00600000 ranges:
[    1.259476] c3      1   No bus range found for /soc/qcom,pcie@00600000, using [bus 00-ff]
[    1.259500] c3      1    IO 0x0c200000..0x0c2fffff -> 0x0c200000
[    1.259512] c3      1   MEM 0x0c300000..0x0cffffff -> 0x0c300000
[    1.269663] c3      1 pci-msm 600000.qcom,pcie: PCI host bridge to bus 0000:00
[    1.269674] c3      1 pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.269682] c3      1 pci_bus 0000:00: root bus resource [io  0x0000-0xfffff] (bus address [0xc200000-0xc2fffff])
[    1.269690] c3      1 pci_bus 0000:00: root bus resource [mem 0x0c300000-0x0cffffff]
[    1.269748] c3      1 pci 0000:00:00.0: [17cb:0104] type 01 class 0x060400
[    1.269842] c3      1 msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0014[4] is all FFs
[    1.269854] c3      1 pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    1.269904] c3      1 pci 0000:00:00.0: IOMMU is currently not supported for PCI
[    1.269987] c3      1 pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    1.270042] c3      1 pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-19
[    1.270240] c3      1 pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    1.270435] c3      1 pci 0000:01:00.0: [168c:003e] type 00 class 0x028000
[    1.270579] c3      1 msm_pcie_oper_conf: Read of RC0 1:0x00 + 0x0014[4] is all FFs
[    1.270589] c3      1 pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[    1.270738] c3      1 pci 0000:01:00.0: IOMMU is currently not supported for PCI
[    1.270902] c3      1 pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    1.271371] c3      1 pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    1.271477] c3      1 msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0028[4] is all FFs
[    1.271504] c3      1 pci 0000:00:00.0: BAR 8: assigned [mem 0x0c400000-0x0c5fffff]
[    1.271512] c3      1 pci 0000:00:00.0: BAR 0: assigned [mem 0x0c300000-0x0c300fff 64bit]
[    1.271561] c3      1 pci 0000:01:00.0: BAR 0: assigned [mem 0x0c400000-0x0c5fffff 64bit]
[    1.271790] c3      1 pci 0000:00:00.0: PCI bridge to [bus 01]
[    1.271823] c3      1 pci 0000:00:00.0:   bridge window [mem 0x0c400000-0x0c5fffff]
[    1.273261] c3      1 cnss soc:qcom,cnss: for AR6320 segments only will be dumped.
[    1.285484] c3      1 msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
[    1.287864] c3      1 cnss: Platform driver probed successfully.
[    1.290568] c3      1 usbcore: registered new interface driver asix
[    1.290603] c3      1 usbcore: registered new interface driver ax88179_178a
[    1.290625] c3      1 usbcore: registered new interface driver cdc_ether
[    1.290645] c3      1 usbcore: registered new interface driver net1080
[    1.290667] c3      1 usbcore: registered new interface driver cdc_subset
[    1.290688] c3      1 usbcore: registered new interface driver zaurus
[    1.290995] c3      1 usbcore: registered new interface driver cdc_ncm
[    1.291575] c3    250 msm_sharedmem: sharedmem_register_qmi: qmi init successful
[    1.295449] c3      1 msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
[    1.297905] c3      1 rtel: rtel_probe: Device created for client 'rtel'
[    1.304580] c3      1 msm-dwc3 6a00000.ssusb: unable to get dbm device
[    1.307951] c3      1 usbcore: registered new interface driver usb-storage
[    1.307989] c3      1 usbcore: registered new interface driver ums-alauda
[    1.308010] c3      1 usbcore: registered new interface driver ums-cypress
[    1.308028] c3      1 usbcore: registered new interface driver ums-datafab
[    1.308046] c3      1 usbcore: registered new interface driver ums-freecom
[    1.308063] c3      1 usbcore: registered new interface driver ums-isd200
[    1.308083] c3      1 usbcore: registered new interface driver ums-jumpshot
[    1.308101] c3      1 usbcore: registered new interface driver ums-karma
[    1.308119] c3      1 usbcore: registered new interface driver ums-sddr09
[    1.308136] c3      1 usbcore: registered new interface driver ums-sddr55
[    1.308153] c3      1 usbcore: registered new interface driver ums-usbat
[    1.308225] c3      1 usbcore: registered new interface driver usbserial
[    1.308248] c3      1 usbcore: registered new interface driver usb_ehset_test
[    1.309280] c3      1 fusb302 9-0022: fusb30x_probe
[    1.309292] c3      1 FUSB [fusb30x_SetChip] chip->client addr = 0x22
[    1.310509] c3      1 i2c-msm-v2 75b7000.i2c: msm_bus_scale_register_client(mstr-id:84):0x13 (ok)
[    1.311175] c3      1 FUSB  fusb_InitializeGPIO - INT_N GPIO initialized as pin '124'
[    1.311188] c3      1 fusb_InitializeGPIO - Warning: Could not get GPIO for Debug GPIO! Error code: -2
[    1.315133] c3      1 FUSB platform_notify_cc_orientation: orientation=[0], CC1=[5], CC2=[5]
[    1.315782] c3      1 FUSB platform_notify_pd_contract: Contract=[0], typec_state(0x0), pd_state(0x0)
[    1.317010] c3      1 fusb302 9-0022: FUSB  fusb30x_probe - FUSB30X Driver loaded successfully!
[    1.317701] c2      1 gbridge_init: gbridge_init successs.
[    1.317857] c2      1 mousedev: PS/2 mouse device common for all mice
[    1.318056] c2      1 usbcore: registered new interface driver xpad
[    1.318990] c2      1 [TP]: parse_config
[    1.319840] c0    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    1.319860] c0    258 FUSB StateMachineTypeC: enter
[    1.320620] c0    258 FUSB fusb_GPIO_Set_VBus5v: set vbus ctrl: 0, typec_state(0x2), pd_state(0x0), retry: 0
[    1.350545] c2      1 i2c-msm-v2 7577000.i2c: msm_bus_scale_register_client(mstr-id:86):0x14 (ok)
[    1.350959] c2      1 [TP]:check_chip_exist: Synaptics chip exist
[    1.359271] c2      1 [TP]:synaptics_rmi4_f12_init: Function 12 max x = 1079 max y = 1919 Rx: 16 Tx: 28
[    1.359885] c2      1 [TP]synaptics_rmi4_f12_init:Wakeup Gesture range (0,0) -> (1079,1919)
[    1.360126] c2      1 [TP]:synaptics_rmi4_f12_init report data init done
[    1.367723] c2      1 [TP]:synaptics_rmi4_query_device: chip_id:3708, firmware_id:2433782
[    1.368644] c2      1 [TP]:synaptics_rmi4_query_device: config_version: 5331763200190000000000000000000000000000000000000000000000000000
[    1.369085] c2      1 input: synaptics_dsxv26 as /devices/soc/7577000.i2c/i2c-3/3-0020/input/input3
[    1.369412] c2      1 [TP]: [ERR]:synaptics_rmi4_irq_enable: Interrupt already enabled
[    1.371964] c2      1 input: hbtp_vm as /devices/virtual/input/input4
[    1.372153] c2      1 [LASER] stmvl53l0_init: Enter
[    1.372160] c2      1 [LASER] stmvl53l0_init_i2c: Enter
[    1.372966] c2      1 [LASER] stmvl53l0_probe: Enter++
[    1.373015] c2      1 [LASER] Laser_parse_dt: pwdn_gpio = 94
[    1.373157] c2      1 [LASER] Laser_parse_dt: laser_irq_gpio = 62
[    1.373177] c2      1 [LASER] Laser_parse_dt: Laser_parse_dt: sensor cali_size = 768
[    1.373183] c2      1 [LASER] Laser_parse_dt: gyro sensor cali_data[100] = 67
[    1.373188] c2      1 [LASER] Laser_parse_dt: gyro sensor cali_data[101] = 00
[    1.373193] c2      1 [LASER] Laser_parse_dt: gyro sensor cali_data[102] = 04
[    1.373198] c2      1 [LASER] Laser_parse_dt: gyro sensor cali_data[103] = 18
[    1.373203] c2      1 [LASER] Laser_parse_dt: gyro sensor cali_data[104] = 67
[    1.373209] c2      1 [LASER] Laser_parse_dt: gyro sensor cali_data[105] = 00
[    1.373213] c2      1 [LASER] Laser_parse_dt: gyro sensor cali_data[106] = 05
[    1.373219] c2      1 [LASER] Laser_parse_dt: gyro sensor cali_data[107] = 00
[    1.373224] c2      1 [LASER] Laser_parse_dt: Laser_parse_dt: Update offset_kvalue = 24
[    1.373229] c2      1 [LASER] Laser_parse_dt: Laser_parse_dt: Update xtalk_kvalue = 0x5
[    1.373234] c2      1 [LASER] Laser_parse_dt: Update SpadCount = 4 and IsAperture = 0
[    1.373240] c2      1 [LASER] stmvl53l0_parse_vdd: Enter++
[    1.373295] c2      1 12-0029 supply vdd not found, using dummy regulator
[    1.373328] c2      1 [LASER] stmvl53l0_parse_vdd: End--
[    1.373333] c2      1 [LASER] Laser_pinctrl_init: Enter++
[    1.373637] c2      1 [LASER] Laser_pinctrl_init: End--
[    1.373647] c2      1 [LASER] stmvl53l0_setup: Enter++
[    1.373670] c2      1 [LASER] stmvl53l0_setup: register_irq: 417
[    1.374006] c2      1 [LASER] stmvl53l0_setup: interrupt is hooked
[    1.374141] c2      1 input: STM VL53L0 proximity sensor as /devices/virtual/input/input5
[    1.374198] c2      1 [LASER] stmvl53l0_setup: Misc device registration name:12-0029
[    1.374788] c2      1 i2c-msm-v2 75ba000.i2c: msm_bus_scale_register_client(mstr-id:84):0x15 (ok)
[    1.375158] c2      1 [LASER] stmvl53l0_setupAPIFunctions: read REVISION_ID: 0x10
[    1.375158] c2      1  API_VERSION: 1.1.20.2
[    1.375165] c2      1 [LASER] stmvl53l0_setupAPIFunctions: to setup API cut 1.1
[    1.375177] c2      1 [LASER] stmvl53l0_init_client: Enter
[    1.375182] c2      1 [LASER] stmvl53l0_init_client: Call of VL53L0_DataInit
[    1.379655] c1     52 ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[1, 1], pwr[FAST MODE, FAST MODE], rate = 2
[    1.380354] c1     52 scsi 0:0:0:49488: Well-known LUN    SAMSUNG  KLUDG8J1CB-B0B1  0700 PQ: 0 ANSI: 6
[    1.381418] c1     52 scsi 0:0:0:49456: Well-known LUN    SAMSUNG  KLUDG8J1CB-B0B1  0700 PQ: 0 ANSI: 6
[    1.382325] c2      1 [LASER] stmvl53l0_init_client: Call of VL53L0_StaticInit
[    1.382449] c1     52 scsi 0:0:0:49476: Well-known LUN    SAMSUNG  KLUDG8J1CB-B0B1  0700 PQ: 0 ANSI: 6
[    1.383733] c3      6 scsi 0:0:0:0: Direct-Access     SAMSUNG  KLUDG8J1CB-B0B1  0700 PQ: 0 ANSI: 6
[    1.384611] c3      6 scsi 0:0:0:1: Direct-Access     SAMSUNG  KLUDG8J1CB-B0B1  0700 PQ: 0 ANSI: 6
[    1.385176] c3      6 scsi 0:0:0:2: Direct-Access     SAMSUNG  KLUDG8J1CB-B0B1  0700 PQ: 0 ANSI: 6
[    1.385739] c3      6 scsi 0:0:0:3: Direct-Access     SAMSUNG  KLUDG8J1CB-B0B1  0700 PQ: 0 ANSI: 6
[    1.386305] c3      6 scsi 0:0:0:4: Direct-Access     SAMSUNG  KLUDG8J1CB-B0B1  0700 PQ: 0 ANSI: 6
[    1.386877] c3      6 scsi 0:0:0:5: Direct-Access     SAMSUNG  KLUDG8J1CB-B0B1  0700 PQ: 0 ANSI: 6
[    1.387798] c0     58 sd 0:0:0:0: [sda] 16384-byte physical blocks
[    1.389080] c1     52 sd 0:0:0:2: [sdc] 16384-byte physical blocks
[    1.389084] c3      6 sd 0:0:0:1: [sdb] 16384-byte physical blocks
[    1.390150] c0     58 sd 0:0:0:0: [sda] 16384-byte physical blocks
[    1.390852] c3      6 sd 0:0:0:1: [sdb] 16384-byte physical blocks
[    1.390910] c1     52 sd 0:0:0:2: [sdc] 16384-byte physical blocks
[    1.393714] c3      6  sdb: sdb1
[    1.394091] c1     52  sdc: sdc1
[    1.394221] c3      6 sd 0:0:0:1: [sdb] 16384-byte physical blocks
[    1.394320] c0    268 sd 0:0:0:3: [sdd] 16384-byte physical blocks
[    1.394836] c1     52 sd 0:0:0:2: [sdc] 16384-byte physical blocks
[    1.396425] c0     58  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21 sda22 sda23 sda24 sda25 sda26 sda27 sda28 sda29 sda30 sda31 sda32 sda33 sda34 sda35 sda36
[    1.397027] c3      6 sd 0:0:0:4: [sde] 16384-byte physical blocks
[    1.397681] c1     52 sd 0:0:0:5: [sdf] 16384-byte physical blocks
[    1.398970] c3      6 sd 0:0:0:4: [sde] 16384-byte physical blocks
[    1.400145] c1     52 sd 0:0:0:5: [sdf] 16384-byte physical blocks
[    1.401439] c3      6  sde: sde1 sde2 sde3 sde4 sde5 sde6
[    1.402373] c3      6 sd 0:0:0:4: [sde] 16384-byte physical blocks
[    1.402709] c1     52  sdf: sdf1 sdf2 sdf3 sdf4 sdf5
[    1.403975] c1     52 sd 0:0:0:5: [sdf] 16384-byte physical blocks
[    1.404614] c0     58 sd 0:0:0:0: [sda] 16384-byte physical blocks
[    1.405086] c2    268 sd 0:0:0:3: [sdd] 16384-byte physical blocks
[    1.407723] c2    268  sdd: sdd1 sdd2 sdd3 sdd4 sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 sdd11 sdd12 sdd13
[    1.408873] c2    268 sd 0:0:0:3: [sdd] 16384-byte physical blocks
[    1.431489] c0      0 irq 354, desc: ffffffc0f93fae00, depth: 0, count: 0, unhandled: 0
[    1.431505] c0      0 ->handle_irq():  ffffffc00032ced0, msm_gpio_irq_handler+0x0/0x148
[    1.431532] c0      0 ->irq_data.chip(): ffffffc001570d28, gic_chip+0x0/0xe8
[    1.431552] c0      0 ->action():           (null)
[    1.431557] c0      0    IRQ_NOPROBE set
[    1.431563] c0      0  IRQ_NOREQUEST set
[    1.431568] c0      0   IRQ_NOTHREAD set
[    1.445227] c2      1 [LASER] stmvl53l0_init_client: Perform and set VhvSettings = 28 and PhaseCal = 1
[    1.446436] c2      1 [LASER] stmvl53l0_init_client: Set refSpadCount = 4 and isApertureSpads = 0
[    1.446596] c2      1 [LASER] stmvl53l0_init_client: Set offset = 24
[    1.446899] c2      1 [LASER] stmvl53l0_init_client: Set xtalk = 0x5
[    1.446906] c2      1 [LASER] stmvl53l0_init_client: Set RIT - 68
[    1.446911] c2      1 [LASER] stmvl53l0_init_client: Call of VL53L0_SetDeviceMode
[    1.447262] c2      1 [LASER] stmvl53l0_init_client: End
[    1.447270] c2      1 [LASER] stmvl53l0_setup: support ver. 1.1.20.2(1.0.5.1) enabled
[    1.447275] c2      1 [LASER] stmvl53l0_setup: End--
[    1.447280] c2      1 [LASER] stmvl53l0_probe: Success--
[    1.447344] c2      1 [LASER] stmvl53l0_init_i2c: End with rc:0
[    1.447351] c2      1 [LASER] stmvl53l0_init: End
[    1.448910] c2      1 qcom,qpnp-rtc qpnp-rtc-8: rtc core: registered qpnp_rtc as rtc0
[    1.449142] c2      1 i2c /dev entries driver
[    1.449371] c2      1 [AUD] tfa9888: tfa9888_init
[    1.449412] c2      1 i2c-core: driver [tfa9888] using legacy suspend method
[    1.449417] c2      1 i2c-core: driver [tfa9888] using legacy resume method
[    1.484175] c2      1 vmem: Up and running with 4 banks of memory from [io  size 0x3f06c4e4c9 disabled]
[    1.502985] c2      1 msm_camera_pinctrl_init:1185 Getting pinctrl handle failed
[    1.503010] c2      1 msm_actuator_platform_probe:1934 ERR:msm_actuator_platform_probe: Error in reading actuator pinctrl
[    1.503125] c2      1 qcom,actuator: probe of a0c000.qcom,cci:qcom,actuator@0 failed with error -22
[    1.505042] c2      1 msm_eeprom_platform_probe failed 1673
[    1.505676] c2      1 msm_eeprom_platform_probe failed 1673
[    1.507495] c2      1 msm_camera_pinctrl_init:1185 Getting pinctrl handle failed
[    1.507513] c2      1 msm_ois_platform_probe:739 ERR:msm_ois_platform_probe: Error in reading OIS pinctrl
[    1.507625] c2      1 qcom,ois: probe of a0c000.qcom,cci:qcom,ois@0 failed with error -22
[    1.511928] c2      1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins
[    1.517741] c2      1 MSM-CPP cpp_init_hardware:863 CPP HW Version: 0x60000000
[    1.517767] c2      1 MSM-CPP cpp_init_hardware:881 stream_cnt:0
[    1.531475] c2      1 __msm_jpeg_init:1537] Jpeg Device id 0
[    1.532553] c2      1 __msm_jpeg_init:1537] Jpeg Device id 2__msm_jpeg_init:1537] Jpeg Device id 3
[    1.537936] c2      1 msm_fd_hw_set_dt_parms_by_name: Error property does not exist
[    1.636718] c2      1 msm_fd aa4000.qcom,fd: Face detection halt timeout
[    1.638599] c2      1 i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0x1e (ok)
[    1.639014] c2      1 SMB1351 smb1351_parallel_slave_probe: smb1351 parallel successfully probed.
[    1.641296] c2      1 htc_battery_init: can't find compatible 'htc,htc_battery_store'
[    1.641632] c3     58 ------------[ cut here ]------------
[    1.641660] c3     58 WARNING: CPU: 3 PID: 58 at /usr/local/google/buildbot/src/partner-android/n-dev-msm-marlin-3.18-nyc-mr2/private/msm-google/include/linux/of.h:770 fg_probe+0x2494/0x26cc()
[    1.641673] c3     58 CPU: 3 PID: 58 Comm: kworker/u8:2 Not tainted 3.18.31-g80c8372084ef #1
[    1.641679] c3     58 Hardware name: HTC Corporation. MSM8996pro v1.1 + PMI8996 Sailfish A (DT)
[    1.641697] c3     58 Workqueue: events_unbound async_run_entry_fn
[    1.641708] c3     58 Call trace:
[    1.641721] c3     58 [<ffffffc00008ac00>] dump_backtrace+0x0/0x134
[    1.641727] c3     58 [<ffffffc00008ad48>] show_stack+0x14/0x1c
[    1.641746] c3     58 [<ffffffc000e23b88>] dump_stack+0x88/0xac
[    1.641755] c3     58 [<ffffffc0000a4050>] warn_slowpath_common+0x88/0xb0
[    1.641760] c3     58 [<ffffffc0000a41bc>] warn_slowpath_null+0x18/0x20
[    1.641766] c3     58 [<ffffffc000792a8c>] fg_probe+0x2494/0x26cc
[    1.641779] c3     58 [<ffffffc000a91404>] spmi_drv_probe+0x14/0x1c
[    1.641791] c3     58 [<ffffffc0005022a0>] driver_probe_device+0xd4/0x224
[    1.641797] c3     58 [<ffffffc0005024a0>] __driver_attach+0x64/0x90
[    1.641809] c3     58 [<ffffffc0005009c0>] bus_for_each_dev+0x80/0xb0
[    1.641815] c3     58 [<ffffffc000502588>] driver_attach+0x20/0x28
[    1.641820] c3     58 [<ffffffc000501294>] bus_add_driver+0xf0/0x1c0
[    1.641826] c3     58 [<ffffffc000502fbc>] driver_register+0x94/0xe0
[    1.641832] c3     58 [<ffffffc000a92128>] spmi_driver_register+0x5c/0x64
[    1.641842] c3     58 [<ffffffc0014db808>] fg_init_async+0x18/0x20
[    1.641848] c3     58 [<ffffffc0000c118c>] async_run_entry_fn+0x48/0xf8
[    1.641857] c3     58 [<ffffffc0000b9550>] process_one_work+0x25c/0x43c
[    1.641863] c3     58 [<ffffffc0000b9a54>] worker_thread+0x324/0x440
[    1.641871] c3     58 [<ffffffc0000be8c8>] kthread+0xec/0xf4
[    1.641948] c3     58 ---[ end trace 4895c8af61984df9 ]---
[    1.642892] c2      1 [BATT] Probe process: (2, 1)
[    1.642935] c1    268 [BATT] htc_battery_fb_register in
[    1.642935] c2      1 [BATT] htc_battery_init done.
[    1.643980] c1     58 FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=19
[    1.644736] c2      1 set restart reason = 0x776655AA
[    1.644747] c2      1 set restart msg = 'Unknown'
[    1.645637] c1     18 FG: update_irq_volt_empty: voltage = 3050, converted_raw = 0038
[    1.646554] c2      1 unable to find DT imem DLOAD mode node
[    1.648496] c2      1 unable to find DT imem EDLOAD mode node
[    1.681638] c2      1 device-mapper: uevent: version 1.0.3
[    1.681800] c2      1 device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
[    1.681936] c2      1 device-mapper: req-crypt: dm-req-crypt successfully initalized.
[    1.681936] c2      1 
[    1.683664] c2      1 bt_power bt_qca6174: no qca,bt-vdd-core-voltage-level property
[    1.683810] c2      1 bt_power bt_qca6174: no qca,bt-vdd-pa-voltage-level property
[    1.683817] c2      1 bt_dt_parse_vreg_info: qca,bt-vdd-ldo: is not provided in device tree
[    1.683823] c2      1 bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree
[    1.684559] c2      1 sdhci: Secure Digital Host Controller Interface driver
[    1.684566] c2      1 sdhci: Copyright(c) Pierre Ossman
[    1.684573] c2      1 sdhci-pltfm: SDHCI platform and OF driver helper
[    1.685586] c2      1 qcom_ice_get_pdevice: found ice device ffffffc03202a400
[    1.685595] c2      1 qcom_ice_get_pdevice: matching platform device ffffffc0f9233800
[    1.685793] c2      1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins
[    1.685838] c2      1 sdhci_msm 74a4900.sdhci: sdhci_msm_probe: ICE device is not enabled
[    1.686017] c2      1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins
[    1.686028] c2      1 sdhci_msm 74a4900.sdhci: Parsing Pinctrl failed with -22, falling back on GPIO lib
[    1.688216] c2      1 pm8994_l21: requested voltage range [2950000, 2950000] does not fit within constraints: [3000000, 3300000]
[    1.688231] c2      1 sdhci_msm_vreg_set_voltage: regulator_set_voltage(vdd)failed. min_uV=2950000,max_uV=2950000,ret=-22
[    1.688242] c2      1 sdhci_msm 74a4900.sdhci: vreg reset failed (-22)
[    1.688249] c2      1 sdhci_msm 74a4900.sdhci: Regulator setup failed (-22)
[    1.689350] c2      1 sdhci_msm: probe of 74a4900.sdhci failed with error -22
[    1.695165] c2      1 hidraw: raw HID events driver (C) Jiri Kosina
[    1.695414] c2      1 usbcore: registered new interface driver usbhid
[    1.695420] c2      1 usbhid: USB HID core driver
[    1.695846] c2      1 ashmem: initialized
[    1.873448] c1    268 [TP]:fwu_start_reflash: Start of reflash process
[    2.323392] c0    258 FUSB fusb_GPIO_Set_VBus5v: set vbus ctrl: 0, typec_state(0x2), pd_state(0x0), retry: 1
[    2.398951] c2      1 nanohub: loaded; ret=0
[    2.399081] c2      1 qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
[    2.411252] c2      1 bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
[    2.413023] c2      1 arm-memlat-mon soc:qcom,arm-memlat-mon-0: Memory Latency governor registered.
[    2.413063] c2      1 arm-memlat-mon soc:qcom,arm-memlat-mon-2: Memory Latency governor registered.
[    2.415740] c2      1 m4m-hwmon 6530000.qcom,m4m-hwmon: Cache HWmon governor registered.
[    2.419757] c2      1 devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
[    2.419874] c2      1 devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
[    2.419982] c2      1 devfreq soc:qcom,memlat-cpu0: Couldn't update frequency transition information.
[    2.420120] c2      1 devfreq soc:qcom,memlat-cpu2: Couldn't update frequency transition information.
[    2.424327] c2      1 Trustonic TEE: MobiCore mcDrvModuleApi version is 2.1
[    2.424337] c2      1 Trustonic TEE: MobiCore t-base-QC-MSM8996-Android-302B-V001-20150529_084320_16
[    2.426005] c2      1 [NC] == NC_probe ==
[    2.426017] c2      1 [NC] Init GPIO pins
[    2.426245] c2      1 usbcore: registered new interface driver snd-usb-audio
[    2.427612] c2      1 tfa98xx_i2c_init(): TFA98XX driver version 2.10.1-a
[    2.427656] c2      1 tfa98xx_i2c_probe(): tfa98xx_i2c_probe
[    2.428067] c2      1 tfa98xx_i2c_probe(): TFA9891 detected
[    2.428082] c2      1 tfa98xx 7-0034: Skipping IRQ registration
[    2.428174] c2      1 tfa98xx_i2c_probe(): tfa98xx_i2c_probe Probe completed successfully!
[    2.428958] c2      1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins
[    2.429044] c2      1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins
[    2.439509] c2      1 msm-dai-tdm soc:qcom,msm-dai-tdm-tert-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx group_id: 0x9120
[    2.439752] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0 dev_id: 0x9020
[    2.439761] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.439909] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1 dev_id: 0x9022
[    2.439918] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.440216] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2 dev_id: 0x9024
[    2.440234] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.440456] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3 dev_id: 0x9026
[    2.440465] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.440485] c2      1 msm-dai-tdm soc:qcom,msm-dai-tdm-tert-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx group_id: 0x9121
[    2.440621] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0 dev_id: 0x9021
[    2.440630] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.440767] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1 dev_id: 0x9023
[    2.440775] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.440910] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2 dev_id: 0x9025
[    2.440919] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.441053] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3 dev_id: 0x9027
[    2.441061] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.441083] c2      1 msm-dai-tdm soc:qcom,msm-dai-tdm-quat-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx group_id: 0x9130
[    2.441216] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0 dev_id: 0x9030
[    2.441224] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.441362] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1 dev_id: 0x9032
[    2.441370] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.441502] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2 dev_id: 0x9034
[    2.441511] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.441651] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3 dev_id: 0x9036
[    2.441659] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.441678] c2      1 msm-dai-tdm soc:qcom,msm-dai-tdm-quat-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx group_id: 0x9131
[    2.441807] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0 dev_id: 0x9031
[    2.441815] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.441949] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1 dev_id: 0x9033
[    2.441958] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.442090] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2 dev_id: 0x9035
[    2.442098] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.442233] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3 dev_id: 0x9037
[    2.442241] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.444615] c2      1 msm-compr-dsp soc:qcom,msm-compr-dsp: msm_compr_probe: dev name soc:qcom,msm-compr-dsp
[    2.453348] c2      1 [AUD] snd_soc_msm8996: uart_gpios_init done
[    2.453404] c2      1 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    2.453414] c2      1 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    2.453460] c2      1 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    2.453483] c2      1 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    2.453505] c2      1 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    2.453526] c2      1 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    2.453548] c2      1 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    2.455217] c2      1 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    2.457250] c3      1 GACT probability NOT on
[    2.457266] c3      1 Mirror/redirect action on
[    2.457284] c3      1 u32 classifier
[    2.457288] c3      1     Actions configured
[    2.457311] c3      1 Netfilter messages via NETLINK v0.30.
[    2.457340] c3      1 nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    2.457509] c3      1 ctnetlink v0.93: registering with nfnetlink.
[    2.457819] c3      1 xt_time: kernel timezone is -0000
[    2.457954] c3      1 ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.458021] c3      1 arp_tables: (C) 2002 David S. Miller
[    2.458046] c3      1 TCP: cubic registered
[    2.458053] c3      1 Initializing XFRM netlink socket
[    2.458223] c3      1 NET: Registered protocol family 10
[    2.458728] c3      1 mip6: Mobile IPv6
[    2.458745] c3      1 ip6_tables: (C) 2000-2006 Netfilter Core Team
[    2.458816] c3      1 sit: IPv6 over IPv4 tunneling driver
[    2.459038] c3      1 NET: Registered protocol family 17
[    2.459055] c3      1 NET: Registered protocol family 15
[    2.459081] c3      1 bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    2.459096] c3      1 Bridge firewalling registered
[    2.459102] c3      1 Ebtables v2.0 registered
[    2.459245] c3      1 Bluetooth: ffffffc0f983fcb8
[    2.459253] c3      1 Bluetooth: ffffffc0f983fca8Bluetooth: ffffffc0f983fce8
[    2.459281] c3      1 Bluetooth: ffffffc0f983fcc8Bluetooth: ffffffc0f983fcc8
[    2.459291] c3      1 Bluetooth: ffffffc0f983fca8Bluetooth: ffffffc0f983fd18
[    2.459302] c3      1 Bluetooth: ffffffc0f983fcf8<6>[    2.459332] c3      1 l2tp_core: L2TP core driver, V2.0
[    2.459344] c3      1 l2tp_ppp: PPPoL2TP kernel driver, V2.0
[    2.459350] c3      1 l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[    2.459365] c3      1 l2tp_netlink: L2TP netlink interface
[    2.459383] c3      1 l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[    2.459396] c3      1 l2tp_debugfs: L2TP debugfs support
[    2.459403] c3      1 l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[    2.460302] c3      1 NET: Registered protocol family 27
[    2.462367] c1     58 usb_otg_vreg: no parameters
[    2.462423] c1     58 reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
[    2.462485] c1     58 reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
[    2.464984] c1     58 subsys-pil-tz 9300000.qcom,lpass: for adsp segments only will be dumped.
[    2.465971] c1     58 subsys-pil-tz 1c00000.qcom,ssc: for slpi segments only will be dumped.
[    2.467140] c1     58 pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id.
[    2.467712] c1     58 pil-q6v5-mss 2080000.qcom,mss: for modem segments only will be dumped.
[    2.470460] c1     58 sps:BAM 0x0000000006b04000 is registered.
[    2.472054] c1     58 qpnp-smbcharger qpnp-smbcharger-16: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
[    2.472082] c1     58 SMBCHG: smbchg_check_chg_version: PMI8996 version = v1.1
[    2.472224] c1     58 smbcharger_charger_otg: no parameters
[    2.472354] c1     58 smbcharger_external_otg: no parameters
[    2.472390] c1     58 smbcharger_external_otg: supplied by pmi8994_boost_5v
[    2.472799] c1     58 SMBCHG: battchg_suspend: 1 voting for 0 - on
[    2.472825] c1     58 SMBCHG: usb_suspend: 7 voting for 0 - off
[    2.473227] c1     58 SMBCHG: usb_suspend: 0 voting for 0 - off
[    2.473233] c1     58 SMBCHG: dc_suspend: 0 voting for 0 - off
[    2.473295] c1     58 SMBCHG: dcl_icl: 0 voting for 1500 - on
[    2.473336] c1     58 SMBCHG: fcc: 1 voting for 2600 - on
[    2.473546] c1     58 SMBCHG: hwaicl_enable_indirect: 0 voting for 0 - on
[    2.473553] c1     58 SMBCHG: hwaicl_disable: 0 voting for 0 - off
[    2.474009] c1    160 SMBCHG: smbchg_clean_tcc_WA_work: called before init
[    2.496887] c1     58 SMBCHG: hwaicl_disable: 1 voting for 0 - off
[    2.496895] c1     58 SMBCHG: usb_suspend: 6 voting for 0 - off
[    2.496959] c1     58 SMBCHG: usb_icl: 0 voting for 100 - on
[    2.496965] c1     58 SMBCHG: usb_suspend: 2 voting for 0 - off
[    2.497219] c1     58 SMB1351 smb1351_parallel_set_chg_present: set slave present = 0 -> 1
[    2.499512] c1     58 SMB1351 smb1351_usb_suspend: reason = 4 requested_suspend = 1 suspended_status = 0 -> 4
[    2.499770] c1     58 SMB1351 smb1351_usb_suspend: reason = 16 requested_suspend = 0 suspended_status = 4 -> 4
[    2.520696] c1    327 [USB] USB3_QSERDES_TX_DRV_LVL = 0x13
[    2.526534] c1     58 qpnp-smbcharger qpnp-smbcharger-16: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
[    2.526554] c1     58 smbchg_debug_mask=0x6
[    2.526573] c1    327 SMBCHG: battchg_suspend: 1 voting for 0 - on
[    2.526614] c1    327 SMBCHG: smbchg_cc_esr_wa_check: Not in fast charge, skipping
[    2.526621] c1    327 SMBCHG: usb_icl: 0 voting for 0 - on
[    2.526627] c1    327 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 0
[    2.526633] c1    327 SMBCHG: usb_suspend: 2 voting for 0 - on
[    2.526659] c1    327 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 0 mA
[    2.526675] c1    327 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
[    2.526681] c1    327 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[    2.526708] c0    365 SMBCHG: power_ok_handler: triggered: 0x00. prev_power_ok(-1) power_ok(0) 
[    2.526758] c1    327 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
[    2.526975] c1     58 SMBCHG: rerun_hvdcp_det_if_necessary: HVDCP not support, return directly
[    2.529812] c1     58 qpnp-smbcharger qpnp-smbcharger-16: SMBCHG successfully probe Charger version=SCHG Revision DIG:2.0 ANA:2.1 batt=1 dc=0 usb=1
[    2.529819] c1     58 [BATT] Probe process: (0, 2)
[    2.529872] c1     58 SMBCHG: handle_usb_insertion: triggered
[    2.529897] c1     58 SMBCHG: handle_usb_insertion: inserted type = 4 (SDP)
[    2.529902] c1     58 SMBCHG: smbchg_change_usb_supply_type: Type 4: setting mA = 100
[    2.529908] c1     58 SMBCHG: usb_icl: 0 voting for 100 - on
[    2.529914] c1     58 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 100
[    2.529919] c1     58 SMBCHG: usb_suspend: 2 voting for 0 - off
[    2.530000] c0    365 SMBCHG: power_ok_handler: triggered: 0x01. prev_power_ok(0) power_ok(1) 
[    2.530031] c1     58 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 100 mA
[    2.530047] c1     58 SMBCHG: smbchg_stay_awake: staying awake: 0x01 (bit 1)
[    2.530129] c1    344 SMBCHG: battchg_suspend: 1 voting for 0 - on
[    2.530137] c1    344 SMBCHG: usb_icl: 0 voting for 0 - on
[    2.530142] c1    344 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 0
[    2.530147] c1    344 SMBCHG: usb_suspend: 2 voting for 0 - on
[    2.530171] c1    344 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 0 mA
[    2.530187] c1    344 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[    2.530214] c0    365 SMBCHG: power_ok_handler: triggered: 0x00.
[    2.530473] c1    344 SMBCHG: battchg_suspend: 1 voting for 0 - on
[    2.530481] c1    344 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[    2.530725] c1    344 SMBCHG: battchg_suspend: 1 voting for 0 - on
[    2.530733] c1    344 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[    2.530970] c1     58 SMBCHG: pmi8994_boot_update_usb_status: Update usb type!
[    2.530982] c1     58 SMBCHG: smbchg_rerun_aicl: Rerunning AICL...
[    2.584547] c1     58 [AUD] snd_soc_msm8996: uart_gpios_init done
[    2.584560] c1     58 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    2.584571] c1     58 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    2.584678] c1     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    2.584711] c1     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    2.584740] c1     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    2.584769] c1     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    2.584799] c1     58 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    2.586936] c1     58 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    2.587328] c1     58 usb_otg_vreg: no parameters
[    2.587367] c1     58 usb_otg_vreg: supplied by smbcharger_external_otg
[    2.588681] c1     58 [AUD] snd_soc_msm8996: uart_gpios_init done
[    2.588694] c1     58 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    2.588706] c1     58 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    2.588809] c1     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    2.588840] c1     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    2.588869] c1     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    2.588896] c1     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    2.588923] c1     58 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    2.591290] c1     58 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    2.592091] c3      1 Loading compiled-in X.509 certificates
[    2.592370] c3      1 Loaded X.509 cert 'Google Inc.: Android: 34e81e2c57675086f628c1b2e4b4ade8e0a1941d'
[    2.592591] c3      1 Loaded X.509 cert 'Google Inc.: Android: 7580d366b6e2804279fd88e290c82a5a7d5dd610'
[    2.592817] c3      1 Loaded X.509 cert 'Android: 7e4333f9bba00adfe0ede979e28ed1920492b40f'
[    2.593039] c3      1 Loaded X.509 cert 'Google Inc.: Android: 01c0e929566dbaa236b29ae14be86f003332a866'
[    2.593664] c3      1 Key type encrypted registered
[    2.629003] c3      1 fastrpc soc:qcom,msm-adsprpc-mem: for adsp_rh segments only will be dumped.
[    2.629071] c3      1 adsprpc: channel link type: 0
[    2.637842] c1     58 [AUD] snd_soc_msm8996: uart_gpios_init done
[    2.637855] c1     58 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    2.637867] c1     58 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    2.637965] c1     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    2.637994] c1     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    2.638023] c1     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    2.638051] c1     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    2.638079] c1     58 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    2.640174] c1     58 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    2.641514] c3      1 RNDIS_IPA module is loaded.
[    2.642020] c3      1 file system registered
[    2.642053] c3      1 mbim_init: initialize 1 instances
[    2.642089] c3      1 mbim_init: Initialized 1 ports
[    2.642368] c1     58 [AUD] snd_soc_msm8996: uart_gpios_init done
[    2.642378] c1     58 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    2.642390] c1     58 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    2.642502] c1     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    2.642531] c1     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    2.642560] c1     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    2.642588] c1     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    2.642616] c1     58 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    2.642818] c3      1 rndis_qc_init: initialize rndis QC instance
[    2.642934] c3      1 Number of LUNs=8
[    2.642942] c3      1 Mass Storage Function, version: 2009/09/11
[    2.642947] c3      1 LUN: removable file: (no medium)
[    2.642959] c3      1 Number of LUNs=1
[    2.642984] c3      1 LUN: removable file: (no medium)
[    2.642988] c3      1 Number of LUNs=1
[    2.643120] c3      1 android_usb gadget: android_usb ready
[    2.644914] c1     58 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    2.646297] c3      1 [KEY] keycode = 115, gpio = 126, irq = 481
[    2.646335] c3      1 [KEY] keycode = 116, gpio = 40, irq = 395[KEY] keycode = 114, gpio = 121, irq = 476
[    2.646465] c3      1 input: gpio-keys as /devices/soc/soc:gpio_keys/input/input6
[    2.646598] c1     58 [AUD] snd_soc_msm8996: uart_gpios_init done
[    2.646609] c1     58 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    2.646619] c1     58 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    2.646833] c1     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    2.646894] c1     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    2.646924] c1     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    2.646953] c1     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    2.646983] c1     58 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    2.647133] c3      1 qcom,qpnp-rtc qpnp-rtc-8: setting system clock to 1970-03-12 23:51:25 UTC (6133885)
[    2.649393] c1     58 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    2.651189] c1     58 [AUD] snd_soc_msm8996: uart_gpios_init done
[    2.651203] c1     58 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    2.651215] c1     58 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    2.651322] c1     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    2.651353] c1     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    2.651383] c1     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    2.651414] c1     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    2.651444] c1     58 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    2.653780] c1     58 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    2.655240] c3      1 lmh_lite:lmh_parse_sensor Registering sensor:[DLMt_APC1]
[    2.655503] c3      1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp00]
[    2.655661] c3      1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp01]
[    2.655783] c1     58 [AUD] snd_soc_msm8996: uart_gpios_init done
[    2.655794] c1     58 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    2.655803] c3      1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp10]
[    2.655806] c1     58 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    2.655929] c1     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    2.655948] c3      1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp11]
[    2.655976] c1     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    2.656011] c1     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    2.656038] c1     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    2.656070] c1     58 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    2.656090] c3      1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_m4m0]
[    2.656227] c3      1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l21-]
[    2.656361] c3      1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l20-]
[    2.658386] c1     58 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    2.659123] c3      1 parse_cpu_levels: idx 1 545
[    2.659133] c3      1 parse_cpu_levels: idx 2 6022
[    2.659137] c3      1 parse_cpu_levels: idx 2 11499
[    2.659216] c3      1 parse_cpu_levels: idx 1 545
[    2.659221] c3      1 parse_cpu_levels: idx 2 6022
[    2.659224] c3      1 parse_cpu_levels: idx 2 11499
[    2.659951] c1     58 [AUD] snd_soc_msm8996: uart_gpios_init done
[    2.659963] c1     58 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    2.659975] c1     58 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    2.660156] c1     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    2.660210] c1     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    2.660240] c1     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    2.660270] c1     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    2.660300] c1     58 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    2.662593] c1     58 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    2.662943] c3      1 [FLT] qpnp_flash_led_probe: ++
[    2.663093] c3      1 [FLT] flash_strobe = 22
[    2.663105] c3      1 qcom,qpnp-flash-led qpnp-flash-led-25: Unable to acquire pinctrl
[    2.664063] c3      1 [FLT] qpnp_flash_led_probe: --
[    2.664073] c2     58 [AUD] snd_soc_msm8996: uart_gpios_init done
[    2.664080] c2     58 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    2.664089] c2     58 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    2.664140] c2     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    2.664162] c2     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    2.664184] c2     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    2.664206] c2     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    2.664228] c2     58 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    2.665891] c3      1 rmnet_ipa started initialization
[    2.665901] c3      1 IPA SSR support = True
[    2.665905] c3      1 IPA ipa-loaduC = True
[    2.665909] c3      1 IPA SG support = True
[    2.665951] c2     58 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    2.667425] c2     58 [AUD] snd_soc_msm8996: uart_gpios_init done
[    2.667436] c2     58 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    2.667445] c2     58 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    2.667500] c2     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    2.667523] c2     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    2.667545] c2     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    2.667567] c2     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    2.667588] c2     58 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    2.667594] c3      1 ipa ipa_sps_irq_control_all:937 EP (5) not allocated.
[    2.667600] c3      1 ipa ipa2_uc_state_check:301 uC is not loaded
[    2.668363] c3      1 rmnet_ipa completed initialization
[    2.669302] c2     58 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    2.670526] c2     58 [AUD] snd_soc_msm8996: uart_gpios_init done
[    2.670538] c2     58 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    2.670547] c2     58 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    2.670597] c2     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    2.670620] c2     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    2.670642] c2     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    2.670663] c2     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    2.670684] c2     58 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    2.672059] c3      1 qcom,cc-debug-8996 362000.qcom,cc-debug: Registered debug mux.
[    2.672362] c2     58 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    2.672972] c3      1 usb_otg_vreg: disabling
[    2.673021] c3      1 rome_vreg: disabling
[    2.673026] c3      1 gdsc_mmagic_bimc: disabling
[    2.673061] c3      1 kryo1-retention: disabling
[    2.673065] c3      1 kryo0-retention: disabling
[    2.673070] c3      1 gfx_mem_acc_corner: disabling
[    2.673074] c3      1 apcc_l3_mem_acc_corner: disabling
[    2.673078] c3      1 apc1_perfcl_mem_acc_corner: disabling
[    2.673082] c3      1 apc0_pwrcl_mem_acc_corner: disabling
[    2.673090] c3      1 regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
[    2.673417] c3      1 clock_late_init: Removing enables held for handed-off clocks
[    2.673589] c2     58 [AUD] snd_soc_msm8996: uart_gpios_init done
[    2.673596] c2     58 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    2.673606] c2     58 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    2.673657] c2     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    2.673680] c2     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    2.673701] c2     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    2.673723] c2     58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    2.673744] c2     58 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    2.675417] c2     58 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    2.677435] c3      1 ALSA device list:
[    2.677441] c3      1   No soundcards found.
[    2.677496] c3      1 Warning: unable to open an initial console.
[    2.677513] c3      1 dm: attempting early device configuration.
[    2.677982] c3      1 device-mapper: init: adding target '0 1 android-verity 259:18    '
[    2.677995] c3      1 device-mapper: android-verity: key:id:7580d366b6e2804279fd88e290c82a5a7d5dd610 dev:259:18
[    2.679920] c3      1 device-mapper: android-verity: bio magic_number:2952900609 protocol_version:0 table_length:236
[    2.679928] c3      1 device-mapper: android-verity: verity_table: 1 /dev/block/bootdevice/by-name/system /dev/block/bootdevice/by-name/system 4096 4096 516099 516099 sha256 13692fb4e152c86421c3dd07aa8e40670c68740acde9e8591228190d832cc5d2 aee087a5be3b982978c923f566a94613496b417f2af592639bc80d141e34dfe7
[    2.680204] c3      1 device-mapper: android-verity: Signature verification success
[    2.680213] c3      1 device-mapper: android-verity: Data sectors 4128792
[    2.680648] c2      1 device-mapper: android-verity: android-verity mounted as verity target
[    2.680778] c2      1 device-mapper: table: 253:0: adding target device sda34 caused an alignment inconsistency: physical_block_size=16384, logical_block_size=4096, alignment_offset=0, start=0
[    2.680787] c2      1 device-mapper: table: 253:0: adding target device sda34 caused an alignment inconsistency: physical_block_size=16384, logical_block_size=4096, alignment_offset=0, start=0
[    2.680831] c2      1 dm: dm-0 is ready
[    2.682098] c3      1 EXT4-fs (dm-0): couldn't mount as ext3 due to feature incompatibilities
[    2.682369] c3      1 EXT4-fs (dm-0): couldn't mount as ext2 due to feature incompatibilities
[    2.685559] c3      1 EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[    2.685585] c3      1 VFS: Mounted root (ext4 filesystem) readonly on device 253:0.
[    2.685672] c3      1 Freeing unused kernel memory: 496K (ffffffc00149e000 - ffffffc00151a000)
[    2.685691] c3      1 Freeing alternatives memory: 76K (ffffffc00151a000 - ffffffc00152d000)
[    2.695340] c3      1 init: init first stage started!
[    2.698673] c3      1 SELinux: 2048 avtab hash slots, 7846 rules.
[    2.699831] c3      1 SELinux: 2048 avtab hash slots, 7846 rules.
[    2.699840] c3      1 SELinux:  1 users, 2 roles, 799 types, 0 bools, 1 sens, 1024 cats
[    2.699845] c3      1 SELinux:  63 classes, 7846 rules
[    2.700493] c3      1 SELinux:  Class can_socket not defined in policy.
[    2.700507] c3      1 SELinux: the above unknown classes and permissions will be denied
[    2.700523] c3      1 SELinux:  Completing initialization.
[    2.700526] c3      1 SELinux:  Setting up existing superblocks.
[    2.700538] c3      1 SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[    2.700550] c3      1 SELinux: initialized (dev bdev, type bdev), not configured for labeling
[    2.700558] c3      1 SELinux: initialized (dev proc, type proc), uses genfs_contexts
[    2.700573] c3      1 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    2.700585] c3      1 SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[    2.728279] c3      1 SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[    2.728292] c3      1 SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[    2.728299] c3      1 SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
[    2.728305] c3      1 SELinux: initialized (dev aio, type aio), not configured for labeling
[    2.728312] c3      1 SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[    2.728325] c3      1 SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
[    2.728334] c3      1 SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[    2.728400] c3      1 SELinux: initialized (dev dm-0, type ext4), uses xattr
[    2.728452] c3      1 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    2.728466] c3      1 SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[    2.731186] c2      1 audit: type=1403 audit(6133885.580:2): policy loaded auid=4294967295 ses=4294967295
[    2.731428] c2      1 audit: type=1404 audit(6133885.580:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[    2.731763] c2      1 init: (Initializing SELinux enforcing took 0.04s.)
[    2.734537] c2      1 init: init second stage started!
[    2.738011] c2      1 init: Running restorecon...
[    2.916909] c2      1 init: waitpid failed: No child processes
[    2.918430] c2      1 init: (Loading properties from /default.prop took 0.00s.)
[    2.920374] c2      1 init: (Parsing /init.environ.rc took 0.00s.)
[    2.921722] c2      1 init: (Parsing /init.usb.rc took 0.00s.)
[    2.922926] c2      1 init: ignored duplicate definition of service 'hci_filter_root'init: (Parsing init.sailfish.nanohub.rc took 0.00s.)
[    2.923821] c2      1 init: (Parsing init.sailfish.usb.rc took 0.00s.)
[    2.924071] c2      1 init: (Parsing init.common.diag.rc took 0.00s.)
[    2.924083] c2      1 init: (Parsing /init.sailfish.rc took 0.00s.)
[    2.924633] c2      1 init: (Parsing /init.usb.configfs.rc took 0.00s.)
[    2.924919] c2      1 init: (Parsing /init.zygote64_32.rc took 0.00s.)
[    2.924931] c2      1 init: (Parsing /init.rc took 0.01s.)
[    2.925532] c2      1 init: Starting service 'ueventd'...
[    2.925932] c2      1 init: Waiting for /dev/.coldboot_done...
[    2.927343] c0    417 ueventd: ueventd started!
[    3.033394] c1    327 SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
[    3.033432] c1    327 SMBCHG: smbchg_is_parallel_usb_ok: Not in fast charge, skipping
[    3.033439] c1    327 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 1)
[    3.226555] c1     18 of_batterydata_get_best_profile: Find batterydata path: qcom,s1-id1-batterydata, id_ohm=22866, raw_min=27501, raw_max=40000.
[    3.226571] c1     18 of_batterydata_get_best_profile: Find batterydata path: qcom,s1-id2-batterydata, id_ohm=22866, raw_min=0, raw_max=16000.
[    3.226579] c1     18 of_batterydata_get_best_profile: Find batterydata path: qcom,s1-id3-batterydata, id_ohm=22866, raw_min=16001, raw_max=27500.
[    3.226593] c1     18 FG: fg_batt_profile_init: batt_full_charge_criteria_ma = 277
[    3.226599] c1     18 FG: fg_batt_profile_init: batt_fcc_ma = 2800
[    3.226605] c1     18 FG: fg_batt_profile_init: batt_capacity_mah = 2770
[    3.226611] c1     18 FG: fg_batt_profile_init: fcc_half_capacity_ma = 0
[    3.230586] c1     18 SMBCHG: battchg_suspend: 0 voting for 0 - on
[    3.326704] c0    258 FUSB fusb_GPIO_Set_VBus5v: set vbus ctrl: 0, typec_state(0x2), pd_state(0x0), retry: 2
[    3.326717] c0    258 dwc3_pd_vbus_ctrl: set pd vbus flag to 0
[    3.357013] c3    417 ueventd: Coldboot took 0.42s.
[    3.359622] c1      1 init: Waiting for /dev/.coldboot_done took 0.43s.
[    3.360754] c1      1 keychord: using input dev qpnp_pon for fevent
[    3.360767] c1      1 keychord: using input dev HDMI CEC User or Deck Control for fevent
[    3.360774] c1      1 keychord: using input dev qbt1000_key_input for fevent
[    3.360802] c1      1 keychord: using input dev gpio-keys for fevent
[    3.361479] c1      1 SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    3.361971] c1      1 SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    3.362795] c1      1 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    3.365296] c1      1 init: write_file: Unable to open '/proc/cpu/alignment': No such file or directory
[    3.366184] c1      1 SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    3.366588] c1      1 SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    3.370270] c1      1 SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
[    3.370514] c1      1 Registered swp emulation handler
[    3.455585] c1    258 FUSB fusb_GPIO_Set_VBus5v: set vbus ctrl: 0, typec_state(0x3), pd_state(0x0), retry: 0
[    3.455600] c1    258 dwc3_pd_vbus_ctrl: set pd vbus flag to 0
[    3.457214] c1    258 FUSB platform_notify_cc_orientation: orientation=[1], CC1=[4], CC2=[0]
[    3.535341] c0    420 fs_mgr: Enabling dm-verity for vendor (mode 2)
[    3.535400] c0    420 fs_mgr: loading verity table: '1 /dev/block/bootdevice/by-name/vendor_b /dev/block/bootdevice/by-name/vendor_b 4096 4096 75590 75590 sha256 70317eaeca3474e115020012adb99241ce6e7c12baeef3967bda8a0f9157db5f aee087a5be3b982978c923f566a94613496b417f2af592639bc80d141e34dfe7 10 restart_on_corruption use_fec_from_device /dev/block/bootdevice/by-name/vendor_b fec_start 76195 fec_blocks 76195 fec_roots 2 ignore_zero_blocks'
[    3.536739] c1    327 SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
[    3.536776] c1    327 SMBCHG: smbchg_is_parallel_usb_ok: Not in fast charge, skipping
[    3.539646] c1    420 device-mapper: table: 253:1: adding target device sda32 caused an alignment inconsistency: physical_block_size=16384, logical_block_size=4096, alignment_offset=0, start=0
[    3.539659] c1    420 device-mapper: table: 253:1: adding target device sda32 caused an alignment inconsistency: physical_block_size=16384, logical_block_size=4096, alignment_offset=0, start=0
[    3.544192] c3    420 EXT4-fs (dm-1): mounting with "discard" option, but the device does not support discard
[    3.544205] c3    420 EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: barrier=1,discard
[    3.544221] c3    420 SELinux: initialized (dev dm-1, type ext4), uses xattr
[    3.544272] c3    420 fs_mgr: __mount(source=/dev/block/dm-1,target=/vendor,type=ext4)=0
[    3.545405] c3    420 SELinux: initialized (dev sda26, type vfat), uses mountpoint labeling
[    3.545426] c3    420 fs_mgr: __mount(source=/dev/block/bootdevice/by-name/modem_b,target=/firmware/radio,type=vfat)=0
[    3.548572] c1      1 init: (Parsing /system/etc/init/atrace.rc took 0.00s.)
[    3.549149] c1      1 init: (Parsing /system/etc/init/audioserver.rc took 0.00s.)
[    3.549542] c1      1 init: (Parsing /system/etc/init/bootanim.rc took 0.00s.)
[    3.549965] c1      1 init: (Parsing /system/etc/init/bootstat.rc took 0.00s.)
[    3.550661] c1      1 init: (Parsing /system/etc/init/cameraserver.rc took 0.00s.)
[    3.551151] c1      1 init: (Parsing /system/etc/init/cppreopts.rc took 0.00s.)
[    3.551560] c1      1 init: (Parsing /system/etc/init/debuggerd.rc took 0.00s.)
[    3.552070] c1      1 init: (Parsing /system/etc/init/debuggerd64.rc took 0.00s.)
[    3.552564] c1      1 init: (Parsing /system/etc/init/drmserver.rc took 0.00s.)
[    3.553022] c1      1 init: (Parsing /system/etc/init/dumpstate.rc took 0.00s.)
[    3.553459] c1      1 init: (Parsing /system/etc/init/gatekeeperd.rc took 0.00s.)
[    3.553900] c1      1 init: (Parsing /system/etc/init/installd.rc took 0.00s.)
[    3.554424] c1      1 init: (Parsing /system/etc/init/keystore.rc took 0.00s.)
[    3.554825] c1      1 init: (Parsing /system/etc/init/lmkd.rc took 0.00s.)
[    3.555213] c1      1 init: (Parsing /system/etc/init/logd.rc took 0.00s.)
[    3.555679] c1      1 init: (Parsing /system/etc/init/mdnsd.rc took 0.00s.)
[    3.556213] c1      1 init: (Parsing /system/etc/init/mediacodec.rc took 0.00s.)
[    3.556624] c1      1 init: (Parsing /system/etc/init/mediadrmserver.rc took 0.00s.)
[    3.557049] c1      1 init: (Parsing /system/etc/init/mediaextractor.rc took 0.00s.)
[    3.557528] c1      1 init: (Parsing /system/etc/init/mediaserver.rc took 0.00s.)
[    3.558008] c1      1 init: (Parsing /system/etc/init/mtpd.rc took 0.00s.)
[    3.558407] c1      1 init: (Parsing /system/etc/init/netd.rc took 0.00s.)
[    3.558815] c1      1 init: (Parsing /system/etc/init/otapreopt.rc took 0.00s.)
[    3.559338] c1      1 init: (Parsing /system/etc/init/racoon.rc took 0.00s.)
[    3.559788] c1      1 init: (Parsing /system/etc/init/recovery-persist.rc took 0.00s.)
[    3.560227] c1      1 init: (Parsing /system/etc/init/recovery-refresh.rc took 0.00s.)
[    3.560694] c1      1 init: (Parsing /system/etc/init/rild.rc took 0.00s.)
[    3.561187] c1      1 init: (Parsing /system/etc/init/servicemanager.rc took 0.00s.)
[    3.561662] c1      1 init: (Parsing /system/etc/init/surfaceflinger.rc took 0.00s.)
[    3.562080] c1      1 init: (Parsing /system/etc/init/uncrypt.rc took 0.00s.)
[    3.562467] c1      1 init: (Parsing /system/etc/init/update_engine.rc took 0.00s.)
[    3.562926] c1      1 init: (Parsing /system/etc/init/vdc.rc took 0.00s.)
[    3.563495] c1      1 init: (Parsing /system/etc/init/vold.rc took 0.00s.)
[    3.565581] c1      1 zram0: detected capacity change from 0 to 536870912
[    3.576091] c0    432 random: mkswap urandom read with 115 bits of entropy available
[    3.619534] c1    268 [TP]:fwu_go_nogo: Device firmware ID = 2433782
[    3.619548] c1    268 [TP]:fwu_go_nogo: Image firmware ID = 2433782
[    3.619554] c1    268 [TP]:fwu_go_nogo: Image firmware ID is the same as device firmware ID
[    3.619559] c1    268 [TP]:fwu_go_nogo: No need to do reflash
[    3.619574] c1    268 [TP]:synaptics_rmi4_reset_device from synaptics_fw_updater+0xd00/0x10a0, rebuild = 0
[    3.620236] c0     52 irq 354, desc: ffffffc0f93fae00, depth: 0, count: 0, unhandled: 0
[    3.620247] c0     52 ->handle_irq():  ffffffc00032ced0, msm_gpio_irq_handler+0x0/0x148
[    3.620259] c0     52 ->irq_data.chip(): ffffffc001570d28, gic_chip+0x0/0xe8
[    3.620270] c0     52 ->action():           (null)
[    3.620276] c0     52    IRQ_NOPROBE set
[    3.620281] c0     52  IRQ_NOREQUEST set
[    3.620286] c0     52   IRQ_NOTHREAD set
[    3.622356] c1      1 Adding 524284k swap on /dev/block/zram0.  Priority:-1 extents:1 across:524284k SS
[    3.624284] c2      1 EXT4-fs (sdd3): mounted filesystem with ordered data mode. Opts: barrier=1
[    3.624304] c2      1 SELinux: initialized (dev sdd3, type ext4), uses xattr
[    3.625625] c2      1 init: Starting service 'logd'...
[    3.626059] c2      1 EXT4-fs (dm-0): re-mounted. Opts: (null)
[    3.642358] c0    435 logd.auditd: start
[    3.642396] c0    435 logd.klogd: 3642371142
[    3.648217] c2    268 [TP]:synaptics_rmi4_f12_init: Function 12 max x = 1079 max y = 1919 Rx: 16 Tx: 28
[    3.648849] c2    268 [TP]synaptics_rmi4_f12_init:Wakeup Gesture range (0,0) -> (1079,1919)
[    3.649090] c2    268 [TP]:synaptics_rmi4_f12_init report data init done
[    3.656814] c2    268 [TP]:synaptics_rmi4_query_device: chip_id:3708, firmware_id:2433782
[    3.657749] c2    268 [TP]:synaptics_rmi4_query_device: config_version: 5331763200190000000000000000000000000000000000000000000000000000
[    3.663540] c2    268 [TP]:fwu_start_reflash: End of reflash process
[    3.663549] c2    268 [TP]:synaptics_config_updater
[    3.664495] c2    268 [TP]:synaptics_config_updater: Device config ID = 5331763200190000000000000000000000000000000000000000000000000000
[    3.664500] c2    268 [TP]:synaptics_config_updater: Start of write config process
[    3.718093] c2    268 [TP]: fwu_get_tw_vendor_v7: tw_vendor = 0x1
[    3.718111] c2    268 [TP]:synaptics_config_updater: Image config ID = 5331763200190000000000000000000000000000000000000000000000000000
[    3.718116] c2    268 [TP]:synaptics_config_updater: config_size = 2048
[    3.718123] c2    268 [TP]: synaptics_config_updater: crc_cksum = A293CDAD
[    3.719743] c2    268 [TP]: crc_comparison_v7: config_crc = A293CDAD, flash_crc = A293CDAD
[    3.719749] c2    268 [TP]: synaptics_config_updater: No need to update
[    3.719760] c2    268 [TP]:synaptics_rmi4_reset_device from synaptics_config_updater+0x748/0xa50, rebuild = 0
[    3.720425] c0      0 irq 354, desc: ffffffc0f93fae00, depth: 0, count: 0, unhandled: 0
[    3.720436] c0      0 ->handle_irq():  ffffffc00032ced0, msm_gpio_irq_handler+0x0/0x148
[    3.720448] c0      0 ->irq_data.chip(): ffffffc001570d28, gic_chip+0x0/0xe8
[    3.720459] c0      0 ->action():           (null)
[    3.720464] c0      0    IRQ_NOPROBE set
[    3.720468] c0      0  IRQ_NOREQUEST set
[    3.720473] c0      0   IRQ_NOTHREAD set
[    3.748004] c2    268 [TP]:synaptics_rmi4_f12_init: Function 12 max x = 1079 max y = 1919 Rx: 16 Tx: 28
[    3.748640] c2    268 [TP]synaptics_rmi4_f12_init:Wakeup Gesture range (0,0) -> (1079,1919)
[    3.748883] c2    268 [TP]:synaptics_rmi4_f12_init report data init done
[    3.756560] c2    268 [TP]:synaptics_rmi4_query_device: chip_id:3708, firmware_id:2433782
[    3.757489] c2    268 [TP]:synaptics_rmi4_query_device: config_version: 5331763200190000000000000000000000000000000000000000000000000000
[    3.760612] c0      0 random: nonblocking pool is initialized
[    3.763228] c2    268 [TP]:synaptics_config_updater: End of write config process
[    3.763235] c2    268 [TP]: synaptics_config_updater end
[    3.834252] c3      1 init: Starting service 'qseecomd'...
[    3.834749] c3      1 init: Starting service 'exec 1 (/system/bin/init.qcom.qseecomd.sh)'...
[    3.895496] c0    443 capability: warning: `qseecomd' uses 32-bit capabilities (legacy support in use)
[    3.911178] c0    442 type=1400 audit(6133886.760:4): avc: denied { search } for pid=446 comm="qseecomd" name="firmware" dev="dm-0" ino=25 scontext=u:r:tee:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    3.955549] c3      1 init: Service 'exec 1 (/system/bin/init.qcom.qseecomd.sh)' (pid 444) exited with status 0
[    3.955904] c3      1 init: Starting service 'flash-nanohub-fw'...
[    3.956533] c3      1 SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts
[    3.957629] c3      1 init: Starting service 'exec 2 (/system/bin/recovery-refresh)'...
[    3.964735] c3      1 init: Service 'exec 2 (/system/bin/recovery-refresh)' (pid 459) exited with status 254
[    3.965777] c3      1 init: (Loading properties from /system/build.prop took 0.00s.)
[    3.966111] c3      1 init: (Loading properties from /vendor/build.prop took 0.00s.)
[    3.966139] c3      1 init: (Loading properties from /factory/factory.prop took 0.00s.)
[    3.966276] c3      1 init: /recovery not specified in fstab
[    3.968455] c3      1 subsys-pil-tz 9300000.qcom,lpass: adsp: loading from 0x000000008ea00000 to 0x0000000090400000
[    3.973869] c1    258 FUSB platform_notify_pd_contract: Contract=[0], typec_state(0x4), pd_state(0x1b)
[    4.000468] c2    359 SMBCHG: src_detect_handler:  chip->usb_present = 1 usb_present = 0 src_detect = 0 hvdcp_3_det_ignore_uv=0
[    4.000483] c2    359 SMBCHG: handle_usb_removal: triggered
[    4.000490] c2    359 SMBCHG: smbchg_change_usb_supply_type: Type 0: setting mA = 1100
[    4.000495] c2    359 SMBCHG: usb_icl: 0 voting for 1100 - on
[    4.000501] c2    359 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 1100
[    4.000506] c2    359 SMBCHG: usb_suspend: 2 voting for 0 - off
[    4.000534] c2    359 SMBCHG: smbchg_set_usb_current_max: override_usb_current=0 current_ma set to 500
[    4.000651] c2    359 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 500 mA
[    4.000674] c2    359 SMBCHG: smbchg_stay_awake: staying awake: 0x01 (bit 1)
[    4.000687] c2    359 SMBCHG: usb_icl: 0 voting for 1100 - off
[    4.000792] c2    359 dwc3_msm_power_set_property_usb: delay 500ms to confirm disconnect or pr_swap
[    4.000819] c2    359 SMB1351 smb1351_parallel_set_chg_present: set slave present = 1 -> 0
[    4.000825] c2    359 SMB1351 smb1351_usb_suspend: reason = 16 requested_suspend = 1 suspended_status = 4 -> 20
[    4.001021] c2    263 SMBCHG: battchg_suspend: 1 voting for 0 - on
[    4.001031] c2    263 SMBCHG: usb_icl: 0 voting for 0 - on
[    4.001035] c2    263 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 0
[    4.001039] c2    263 SMBCHG: usb_suspend: 2 voting for 0 - on
[    4.001116] c2    263 SMBCHG: smbchg_set_usb_current_max: usb type = 0 current set to 0 mA
[    4.001135] c2    263 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[    4.001225] c2    359 SMBCHG: usb_icl: 4 voting for 0 - off
[    4.001230] c2    359 SMBCHG: usb_icl: 5 voting for 0 - off
[    4.001237] c2    359 SMBCHG: hwaicl_short_deglitch: 1 voting for 0 - off
[    4.001580] c2    263 SMBCHG: battchg_suspend: 1 voting for 0 - on
[    4.001588] c2    263 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[    4.016244] c0    357 SMBCHG: usbin_uv_handler:  chip->usb_present = 0 rt_sts = 0x01 hvdcp_3_det_ignore_uv = 0 rerun_apsd_ignore_uv = 0 aicl = 1500, vbus = 479880
[    4.040210] c0    442 type=1400 audit(6133886.890:5): avc: denied { search } for pid=458 comm="nanoapp_cmd" name="firmware" dev="dm-0" ino=25 scontext=u:r:nanoapp_cmd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    4.040709] c0    442 type=1400 audit(6133886.890:6): avc: denied { search } for pid=458 comm="nanoapp_cmd" name="firmware" dev="dm-0" ino=25 scontext=u:r:nanoapp_cmd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    4.040781] c0    442 type=1400 audit(6133886.890:7): avc: denied { search } for pid=458 comm="nanoapp_cmd" name="firmware" dev="dm-0" ino=25 scontext=u:r:nanoapp_cmd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    4.269553] c3      1 subsys-pil-tz 9300000.qcom,lpass: adsp: Brought out of reset
[    4.281974] c1     52 [AUD] snd_soc_msm8996: uart_gpios_init done
[    4.281987] c1     52 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    4.281999] c1     52 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    4.282111] c1     52 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    4.282140] c1     52 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    4.282168] c1     52 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    4.282195] c1     52 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    4.282224] c1     52 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    4.284893] c1     52 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    4.288379] c1     52 [AUD] snd_soc_msm8996: uart_gpios_init done
[    4.288394] c1     52 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    4.288405] c1     52 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    4.288572] c1     52 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    4.288644] c1     52 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    4.288683] c1     52 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    4.288721] c1     52 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    4.288868] c1     52 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    4.291050] c0      0 subsys-pil-tz 9300000.qcom,lpass: Subsystem error monitoring/handling services are up
[    4.291120] c3      1 sysmon_send_event_no_qmi: Message sending failed -19
[    4.291146] c0    332 subsys-pil-tz 9300000.qcom,lpass: adsp: Power/Clock ready interrupt received
[    4.291208] c3      1 sysmon_send_event_no_qmi: Message sending failed -19
[    4.291253] c1    332 L-Notify: Generel: 7
[    4.292029] c1     52 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    4.297033] c3      1 subsys-pil-tz 1c00000.qcom,ssc: slpi: loading from 0x0000000090400000 to 0x0000000090e00000
[    4.302428] c0    469 apr_tal:Q6 Is Up
[    4.304692] c2     52 [AUD] snd_soc_msm8996: msm8996_asoc_machine_probe: schedule_delayed_work with card_det_work
[    4.304767] c2     52 [AUD] snd_soc_msm8996: uart_gpios_init done
[    4.304774] c2     52 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    4.304783] c2     52 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    4.304827] c2     52 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    4.304850] c2     52 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    4.304871] c2     52 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    4.304893] c2     52 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    4.304914] c2     52 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    4.306870] c2     52 msm8996-asoc-snd soc:sound-9335: ASoC: CODEC DAI tasha_vifeedback not registered
[    4.391582] c1     58 sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and adsp's SSCTL service
[    4.392373] c1    270 diag: In socket_open_client, socket not initialized for LPASS_CMD
[    4.392393] c1    270 diag: In diag_send_feature_mask_update, control channel is not open, p: 1, 0000000000000000
[    4.393194] c0    442 type=1400 audit(6133887.240:8): avc: denied { create } for pid=270 comm="kworker/u8:5" scontext=u:r:kernel:s0 tcontext=u:r:kernel:s0 tclass=socket permissive=0
[    4.399233] c1    327 sps:BAM 0x0000000009184000 (va:0xffffff8004400000) enabled: ver:0x19, number of pipes:31
[    4.399252] c1    327 sps:BAM 0x0000000009184000 is registered.
[    4.400458] c0    384 wcd9335-slim tasha-slim-pgd: Platform data from device tree
[    4.400553] c0    384 wcd9335-slim tasha-slim-pgd: cdc-vdd-buck: vol=[1800000 1800000]uV, curr=[650000]uA, ond 0
[    4.400573] c0    384 wcd9335-slim tasha-slim-pgd: cdc-buck-sido: vol=[1800000 1800000]uV, curr=[250000]uA, ond 0
[    4.400593] c0    384 wcd9335-slim tasha-slim-pgd: cdc-vdd-tx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
[    4.400612] c0    384 wcd9335-slim tasha-slim-pgd: cdc-vdd-rx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
[    4.400631] c0    384 wcd9335-slim tasha-slim-pgd: cdc-vddpx-1: vol=[1800000 1800000]uV, curr=[10000]uA, ond 0
[    4.400640] c0    384 wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-ldoh-v property in node /soc/slim@91c0000/tasha_codec failed
[    4.400647] c0    384 wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-cfilt1-mv property in node /soc/slim@91c0000/tasha_codec failed
[    4.400656] c0    384 wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-cfilt2-mv property in node /soc/slim@91c0000/tasha_codec failed
[    4.400664] c0    384 wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-cfilt3-mv property in node /soc/slim@91c0000/tasha_codec failed
[    4.400674] c0    384 wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias1-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed
[    4.400681] c0    384 wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias2-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed
[    4.400688] c0    384 wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias3-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed
[    4.400695] c0    384 wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias4-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed
[    4.400825] c0    384 wcd9335-slim tasha-slim-pgd: wcd9xxx_slim_probe: codec type is 2
[    4.401376] c1    269 [AUD] snd_soc_msm8996: uart_gpios_init done
[    4.401392] c1    269 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    4.401403] c1    269 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    4.401519] c1    269 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    4.401561] c1    269 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    4.401615] c1    269 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    4.401657] c1    269 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    4.401693] c1    269 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    4.404467] c1    269 msm8996-asoc-snd soc:sound-9335: ASoC: CODEC DAI tasha_vifeedback not registered
[    4.453529] c2    384 slimbus:1 laddr:0xcb, EAPC:0x1:0xa0
[    4.453564] c1    269 wcd9335-slim tasha-slim-pgd: wcd9xxx_slim_device_up: slim device up, dev_up = 1
[    4.453763] c0    384 slimbus:1 laddr:0xca, EAPC:0x0:0xa0
[    4.453972] c0    384 wcd9335-slim tasha-slim-pgd: wcd9335_bring_up: wcd9335 codec version is v2.0
[    4.454588] c0    384 wcd9335-slim tasha-slim-pgd: wcd9xxx_check_codec_type: detected tasha_codec, major 0x107, minor 0x1, ver 0x2
[    4.454602] c0    384 wcd9xxx_core_res_init: num_irqs = 31, num_irq_regs = 4
[    4.465781] c3      1 subsys-pil-tz 1c00000.qcom,ssc: slpi: Brought out of reset
[    4.465966] c1    384 tasha_codec tasha_codec: tasha_probe: Tasha driver probe done
[    4.466645] c2    269 [AUD] snd_soc_msm8996: uart_gpios_init done
[    4.466655] c2    269 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    4.466664] c2    269 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    4.466756] c2    269 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    4.466781] c2    269 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    4.466803] c2    269 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    4.466824] c2    269 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    4.466846] c2    269 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    4.469636] c2    269 tasha_codec tasha_codec: tasha_codec_probe()
[    4.484194] c3    269 [AUD] snd_soc_wcd_mbhc: [AUD][HS] register_attributes
[    4.484649] c3    269 wcd_mbhc_init: ret 0 --
[    4.484999] c3    269 tasha_codec tasha_codec: for cpe segments only will be dumped.
[    4.500104] c2    263 dwc3_notify_vbus_work: pd_vbus_change = 0
[    4.500117] c2    263 dwc3_notify_vbus_work: maybe cable out or SINK first connect, resume state machine
[    4.500572] c0    469 msm-dwc3 6a00000.ssusb: dwc3_msm_suspend unvote for TCXO buffer
[    4.500682] c0    469 msm-dwc3 6a00000.ssusb: DWC3 in low power mode
[    4.500698] c0    469 android_work: [USB] android_work: sw_suspended 0, suspended 0 config 0,connect2pc 0
[    4.500703] c0    469 android_work: [USB] android_work: sw_connected 0, connected 0 last_uevent 0
[    4.500711] c0    469 android_work: android_work: did not send uevent (0 0           (null))
[    4.500905] c0     42 SMBCHG: battchg_suspend: 1 voting for 0 - on
[    4.500918] c0     42 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[    4.501411] c3    269 msm8996-asoc-snd soc:sound-9335: control 2:0:0:CPE AFE MAD Enable:0 is already present
[    4.503200] c3    269 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for MM_DL5 --> MultiMedia5 --> TERT_MI2S_RX Audio Mixer
[    4.503209] c3    269 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MM_DL5 -> MultiMedia5 -> TERT_MI2S_RX Audio Mixer
[    4.503231] c3    269 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for MM_DL8 --> MultiMedia8 --> TERT_MI2S_RX Audio Mixer
[    4.503236] c3    269 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MM_DL8 -> MultiMedia8 -> TERT_MI2S_RX Audio Mixer
[    4.503391] c2     24 SMBCHG: smbchg_parallel_usb_en_work: AICL at 1500
[    4.503462] c2     24 SMBCHG: smbchg_is_parallel_usb_ok: Not in fast charge, skipping
[    4.503468] c2     24 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 1)
[    4.503483] c2    359 SMBCHG: set_aicl_enable: Enable AICL...
[    4.503643] c2     24 SMBCHG: battchg_suspend: 1 voting for 0 - on
[    4.503652] c2     24 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
[    4.503657] c2     24 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[    4.503792] c2    263 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
[    4.509357] c3    269 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for AUDIO_REF_EC_UL3 MUX
[    4.509370] c3    269 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route AUDIO_REF_EC_UL3 MUX -> direct -> MM_UL3
[    4.513221] c3    269 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for SEC_MI2S_TX --> SEC_MI2S_TX --> SLIMBUS_0_RX Port Mixer
[    4.513235] c3    269 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SEC_MI2S_TX -> SEC_MI2S_TX -> SLIMBUS_0_RX Port Mixer
[    4.514304] c3    269 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for VOICE2_STUB_DL --> Voice2 Stub --> INTERNAL_BT_SCO_RX_Voice Mixer
[    4.514315] c3    269 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICE2_STUB_DL -> Voice2 Stub -> INTERNAL_BT_SCO_RX_Voice Mixer
[    4.515128] c3    269 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for SENARY_MI2S_TX
[    4.515137] c3    269 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route BE_IN -> direct -> SENARY_MI2S_TX
[    4.518948] c0     52 subsys-pil-tz 1c00000.qcom,ssc: Subsystem error monitoring/handling services are up
[    4.518989] c0    336 subsys-pil-tz 1c00000.qcom,ssc: slpi: Power/Clock ready interrupt received
[    4.519572] c3    269 msm8996-asoc-snd soc:sound-9335: control 2:0:0:PRI_MI2S_RX Port Mixer SLIM_0_TX:0 is already present
[    4.519584] c3    269 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: failed to add widget PRI_MI2S_RX Port Mixer dapm kcontrol PRI_MI2S_RX Port Mixer SLIM_0_TX: -16
[    4.519592] c2      1 sysmon_send_event_no_qmi: Message sending failed -19
[    4.519608] c2      1 sensors-ssc soc:qcom,msm-ssc-sensors: slpi_loader_do: SLPI image is loaded
[    4.519980] c2      1 init: Starting service 'servicemanager'...
[    4.520579] c2      1 init: Starting service 'surfaceflinger'...
[    4.521141] c2      1 init: Starting service 'audioserver'...
[    4.521326] c2      6 diag: In diag_send_feature_mask_update, control channel is not open, p: 3, 0000000000000000
[    4.521347] c1    268 diag: In socket_open_client, socket not initialized for SENSORS_CMD
[    4.521810] c0    442 type=1400 audit(6133887.370:9): avc: denied { create } for pid=268 comm="kworker/u8:3" scontext=u:r:kernel:s0 tcontext=u:r:kernel:s0 tclass=socket permissive=0
[    4.522155] c0     52 sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and slpi's SSCTL service
[    4.522243] c2      1 init: Starting service 'bootanim'...
[    4.523948] c2    509 EXT4-fs (sda35): Ignoring removed nomblk_io_submit option
[    4.550125] c2    509 EXT4-fs (sda35): 2 orphan inodes deleted
[    4.550137] c2    509 EXT4-fs (sda35): recovery complete
[    4.557943] c1    509 EXT4-fs (sda35): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
[    4.557979] c1    509 SELinux: initialized (dev sda35, type ext4), uses xattr
[    4.558164] c1    509 fs_mgr: check_fs(): mount(/dev/block/bootdevice/by-name/userdata,/data,ext4)=0: Success
[    4.563505] c1    509 fs_mgr: check_fs(): unmount(/data) succeeded
[    4.563683] c1    509 fs_mgr: Running /system/bin/e2fsck on /dev/block/bootdevice/by-name/userdata
[    4.618144] c3    269 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: mux SLIM_0_RX AANC MUX has no paths
[    4.709999] c3    269 tfa98xx 7-0034: tfa98xx codec registered ()
[    4.712470] c3    269 msm-dai-q6-dev soc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-2-rx: ASoC: no source widget found for SLIMBUS_2_RX
[    4.712483] c3    269 msm-dai-q6-dev soc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-2-rx: ASoC: Failed to add route SLIMBUS_2_RX -> direct -> Slimbus2 Playback
[    4.712509] c3    269 msm-dai-q6-dev soc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-2-tx: ASoC: no sink widget found for SLIMBUS_2_TX
[    4.712515] c3    269 msm-dai-q6-dev soc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-2-tx: ASoC: Failed to add route Slimbus2 Capture -> direct -> SLIMBUS_2_TX
[    4.714566] c3     30 tfa98xx 7-0034: Registered DSP instance with handle 0
[    4.723991] c3    269 [AUD] snd_soc_msm8996: msm_htc_quat_mi2s_init: ++
[    4.724221] c3    269 [AUD] snd_soc_msm8996: msm_htc_quat_mi2s_init: --
[    4.724291] c3    269 [AUD] snd_soc_msm8996: msm_audrx_init: dev_namesoc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-0-rx
[    4.756058] c2    269 input: msm8996-tasha-marlin-snd-card Headset Jack as /devices/soc/soc:sound-9335/sound/card0/input7
[    4.756168] c2    269 input: msm8996-tasha-marlin-snd-card Button Jack as /devices/soc/soc:sound-9335/sound/card0/input8
[    4.756320] c2    269 keychord: using input dev msm8996-tasha-marlin-snd-card Button Jack for fevent
[    4.757106] c2    269 msm8996-asoc-snd soc:sound-9335: Sound card msm8996-tasha-marlin-snd-card registered
[    4.757118] c2    269 [AUD] snd_soc_msm8996: msm8996_asoc_machine_probe:  cancel_delayed_work with card_det_work
[    4.757130] c2    269 msm8996-asoc-snd soc:sound-9335: property qcom,us-euro-gpios not detected in node /soc/sound-9335
[    4.757136] c2    269 [AUD] htc-acoustic: acoustic_register_ops 
[    4.757142] c2    269 [AUD] snd_soc_msm8996: msm8996_asoc_machine_probe: probe successfully
[    4.760913] c0    442 type=1400 audit(6133887.610:10): avc: denied { search } for pid=505 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    4.761182] c0    442 type=1400 audit(6133887.610:11): avc: denied { search } for pid=505 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    4.761250] c0    442 type=1400 audit(6133887.610:12): avc: denied { search } for pid=505 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    4.818089] c0    442 type=1400 audit(6133887.666:13): avc: denied { search } for pid=505 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    4.818211] c0    442 type=1400 audit(6133887.666:14): avc: denied { search } for pid=505 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    4.818281] c0    442 type=1400 audit(6133887.666:15): avc: denied { search } for pid=505 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    4.822702] c0    442 type=1400 audit(6133887.670:16): avc: denied { search } for pid=505 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    4.822804] c0    442 type=1400 audit(6133887.670:17): avc: denied { search } for pid=505 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    4.822920] c0    442 type=1400 audit(6133887.670:18): avc: denied { search } for pid=505 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    4.827297] c0    442 type=1400 audit(6133887.676:19): avc: denied { search } for pid=505 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    4.827419] c0    442 type=1400 audit(6133887.676:20): avc: denied { search } for pid=505 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    4.827475] c0    442 type=1400 audit(6133887.676:21): avc: denied { search } for pid=505 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    4.831079] c0    505 kgsl: _read_fw2_block_header: GPMU unknown header ID 6
[    4.835587] c0    505 cpr3_regulator_measure_aging: gfx: average quotient delta=-7 (count=10)
[    4.835998] c0    505 cpr3_regulator_aging_adjust: gfx: aging measurement successful; aging reference adjustment voltage=338 uV
[    4.848990] c0    442 type=1400 audit(6133887.696:22): avc: denied { search } for pid=505 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    4.849156] c0    442 type=1400 audit(6133887.696:23): avc: denied { search } for pid=505 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    4.849218] c0    442 type=1400 audit(6133887.696:24): avc: denied { search } for pid=505 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    4.851153] c0    505 subsys-pil-tz soc:qcom,kgsl-hyp: a530_zap_signed: loading from 0x0000000090e00000 to 0x0000000090e02000
[    4.870989] c0    442 type=1400 audit(6133887.720:25): avc: denied { search } for pid=505 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    4.871163] c0    442 type=1400 audit(6133887.720:26): avc: denied { search } for pid=505 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    4.871237] c0    442 type=1400 audit(6133887.720:27): avc: denied { search } for pid=505 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    4.879430] c0    505 subsys-pil-tz soc:qcom,kgsl-hyp: a530_zap_signed: Brought out of reset
[    4.880580] c0    357 SMBCHG: usbin_uv_handler:  chip->usb_present = 0 rt_sts = 0x00 hvdcp_3_det_ignore_uv = 0 rerun_apsd_ignore_uv = 0 aicl = 1500, vbus = 5286380
[    4.881392] c0    469 SMBCHG: battchg_suspend: 1 voting for 0 - on
[    4.881415] c0    469 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
[    4.881424] c0    469 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[    4.881550] c0    469 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
[    4.882853] c2    269 devfreq soc:qcom,kgsl-busmon: Couldn't update frequency transition information.
[    4.953523] c0    442 type=1400 audit(6133887.800:28): avc: denied { read write } for pid=505 comm="surfaceflinger" name="diag" dev="tmpfs" ino=15154 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0
[    4.955207] c2    258 [BATT][PD] Charger driver is not ready!
[    4.980880] c2    258 FUSB platform_notify_pd_contract: Contract=[0], typec_state(0x4), pd_state(0x1b)
[    5.013064] c0    357 SMBCHG: usbin_uv_handler:  chip->usb_present = 0 rt_sts = 0x01 hvdcp_3_det_ignore_uv = 0 rerun_apsd_ignore_uv = 0 aicl = 1500, vbus = 505140
[    5.233629] c1    327 of_batterydata_get_best_profile: Find batterydata path: qcom,s1-id1-batterydata, id_ohm=22866, raw_min=27501, raw_max=40000.
[    5.233647] c1    327 of_batterydata_get_best_profile: Find batterydata path: qcom,s1-id2-batterydata, id_ohm=22866, raw_min=0, raw_max=16000.
[    5.233655] c1    327 of_batterydata_get_best_profile: Find batterydata path: qcom,s1-id3-batterydata, id_ohm=22866, raw_min=16001, raw_max=27500.
[    5.233670] c1    327 FG: fg_batt_profile_init: batt_full_charge_criteria_ma = 277
[    5.233676] c1    327 FG: fg_batt_profile_init: batt_fcc_ma = 2800
[    5.233682] c1    327 FG: fg_batt_profile_init: batt_capacity_mah = 2770
[    5.233688] c1    327 FG: fg_batt_profile_init: fcc_half_capacity_ma = 0
[    5.239383] c1    327 SMBCHG: battchg_suspend: 0 voting for 0 - off
[    5.246044] c1    327 FG: fg_batt_profile_init: Battery SOC: 100, V: 4264196uV
[    5.246057] c1    327 [BATT] Probe process: (1, 3)
[    5.246080] c1    327 [BATT] htc_battery_probe_process: catch name 3, set batt id=3, full_ma=277, fcc_ma=2800, capacity=2770, half_capacity_ma:0, pd_is_limited:1, batt_eoc_current_ma:50
[    5.246086] c1    327 [BATT] Probe process done.
[    5.246192] c1     18 SMBCHG: battchg_suspend: 1 voting for 0 - off
[    5.246287] c1     18 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
[    5.246291] c3     58 [BATT] batt_worker: total_time since last batt update = 14316262896 ms.
[    5.246301] c1     18 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[    5.246464] c1    344 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
[    5.249153] c2     58 [BATT] read_batt_cycle_info: (read from devtree) g_batt_first_use_time = 0, g_overheat_55_sec = 0, g_total_level_raw = 0, g_batt_cycle_checksum = 0
[    5.249165] c2     58 [BATT] read_batt_cycle_info: Checksum error: reset battery cycle data.
[    5.249171] c2     58 [BATT] read_batt_cycle_info: g_batt_first_use_time = 6133888, g_overheat_55_sec = 0, g_total_level_raw = 0
[    5.249178] c2     58 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 1970-03-12 23:51:28, g_overheat_55_sec = 0, g_total_level_raw = 0
[    5.249182] c2     58 [BATT] calculate_batt_cycle_info: save batt cycle data every 50%
[    5.249219] c2     58 [BATT] batt_check_consistent: magic_num=0x0, level_raw=100, store_soc=0, current_time:6133888, store_time=0, batt_temp=315, store_temp=0, consistent_flag=0 at 5249209062 (1970-03-12 23:51:28.102111248 UTC)
[    5.249227] c2     58 [BATT] pre_level=100,pre_raw_level=100,pre_five_digit=10,pre_chg_src=0
[    5.249232] c2     58 [BATT] batt_level_adjust: Cable plug out, to store difference between UI & SOC. store_level:0, prev_level:100, raw_level:100
[    5.249238] c2     58 [BATT] batt_level_adjust: remap: no soc drop and no additional 1%, ui:100%
[    5.249243] c2     58 [BATT] write battery data: level:100, temp:315, time:6133888 at 5249232760 (1970-03-12 23:51:28.102138696 UTC)
[    5.249250] c2     58 ignore the fist time on boot.
[    5.249372] c2     24 SMBCHG: smbchg_cc_esr_wa_check: No inputs present, skipping
[    5.249381] c2     24 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
[    5.249386] c2     24 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[    5.249453] c2     24 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
[    5.252272] c2     58 [BATT][SMBCHG] 0x1010=00,0x1210=00,0x1242=00,0x1310=01,0x1340=12,0x1608=00,0x1610=00,cc=0uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=3,pd_chgr=0,wake_reason=0,smb_curr=15mA,batfet_wa=0
[    5.252436] c2     58 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,2e,9b,80,00],CHG_CFG[F0:F4]=[0f,04,1b,00,2e],CHG_CFG[F5:F9]=[1e,00,01,02,01],CHG_CFG[FA:FF]=[1c,47,42,08,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,2a,04,d0,39]
[    5.252445] c2     58 [BATT][SMBCHG] USB_STS[07:0B]=[0d,01,00,00,08],USB_STS[0C:0F]=[00,00,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,11,ab],MISC_CFG[F0:F4]=[0f,00,12,0a,25],MISC_CFG[F5:F9]=[38,18,a3,02,00],MISC_CFG[FA:FF]=[00,06,c1,05,e1,02],SMB1351[00:06]=[06,1c,87,ef,08,11,6b,],[32]=[00]
[    5.255438] c3     58 [BATT] ID=3,level=100,level_raw=100,vol=4264mV,temp=315,current=698695uA,chg_name=NONE,chg_src=0,chg_en=0,health=0,overload=0,duration=0min,vbus=209mV,max_iusb=0mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1500mA,htc_ext=0x00,usb_temp=292,usb_overheat=0,level_accu=0 at 5255430052 (1970-03-12 23:51:28.108311249 UTC)
[    5.255448] c3     58 [BATT] Device is at booting stage at 5255437813 (1970-03-12 23:51:28.108344686 UTC)
[    5.296782] c3    269 [BATT] batt_worker: total_time since last batt update = 53 ms.
[    5.299469] c2    269 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 1970-03-12 23:51:28, g_overheat_55_sec = 0, g_total_level_raw = 0
[    5.299480] c2    269 [BATT] calculate_batt_cycle_info: save batt cycle data every 50%
[    5.299486] c2    269 [BATT] batt_level_adjust: remap: no soc drop and no additional 1%, ui:100%
[    5.302263] c2    269 [BATT][SMBCHG] 0x1010=00,0x1210=00,0x1242=00,0x1310=01,0x1340=12,0x1608=00,0x1610=00,cc=0uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=3,pd_chgr=0,wake_reason=0,smb_curr=15mA,batfet_wa=0
[    5.302424] c2    269 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,2e,9b,80,00],CHG_CFG[F0:F4]=[0f,04,1b,00,2e],CHG_CFG[F5:F9]=[1e,00,01,02,01],CHG_CFG[FA:FF]=[1c,47,42,08,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,2a,04,d0,39]
[    5.302434] c2    269 [BATT][SMBCHG] USB_STS[07:0B]=[0d,01,00,00,08],USB_STS[0C:0F]=[00,00,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,11,ab],MISC_CFG[F0:F4]=[0f,00,12,0a,25],MISC_CFG[F5:F9]=[38,18,a3,02,00],MISC_CFG[FA:FF]=[00,06,c1,05,e1,02],SMB1351[00:06]=[06,1c,87,ef,08,11,6b,],[32]=[00]
[    5.305379] c3    269 [BATT] ID=3,level=100,level_raw=100,vol=4264mV,temp=315,current=698695uA,chg_name=NONE,chg_src=0,chg_en=0,health=0,overload=0,duration=0min,vbus=202mV,max_iusb=0mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1500mA,htc_ext=0x00,usb_temp=291,usb_overheat=0,level_accu=0 at 5305371151 (1970-03-12 23:51:28.158248598 UTC)
[    5.305389] c3    269 [BATT] Device is at booting stage at 5305378391 (1970-03-12 23:51:28.158285368 UTC)
[    5.350091] c2    269 [BATT] batt_worker: total_time since last batt update = 53 ms.
[    5.353807] c2    269 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 1970-03-12 23:51:28, g_overheat_55_sec = 0, g_total_level_raw = 0
[    5.353818] c2    269 [BATT] calculate_batt_cycle_info: save batt cycle data every 50%
[    5.353824] c2    269 [BATT] batt_level_adjust: remap: no soc drop and no additional 1%, ui:100%
[    5.356589] c2    269 [BATT][SMBCHG] 0x1010=00,0x1210=00,0x1242=00,0x1310=01,0x1340=12,0x1608=00,0x1610=00,cc=0uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=3,pd_chgr=0,wake_reason=0,smb_curr=15mA,batfet_wa=0
[    5.356854] c2    269 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,2e,9b,80,00],CHG_CFG[F0:F4]=[0f,04,1b,00,2e],CHG_CFG[F5:F9]=[1e,00,01,02,01],CHG_CFG[FA:FF]=[1c,47,42,08,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,2a,04,d0,39]
[    5.356864] c2    269 [BATT][SMBCHG] USB_STS[07:0B]=[0d,01,00,00,08],USB_STS[0C:0F]=[00,00,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,11,ab],MISC_CFG[F0:F4]=[0f,00,12,0a,25],MISC_CFG[F5:F9]=[38,18,a3,02,00],MISC_CFG[FA:FF]=[00,06,c1,05,e1,02],SMB1351[00:06]=[06,1c,87,ef,08,11,6b,],[32]=[00]
[    5.359612] c2    269 [BATT] ID=3,level=100,level_raw=100,vol=4264mV,temp=315,current=698695uA,chg_name=NONE,chg_src=0,chg_en=0,health=1,overload=0,duration=0min,vbus=194mV,max_iusb=0mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1500mA,htc_ext=0x00,usb_temp=294,usb_overheat=0,level_accu=0 at 5359602823 (1970-03-12 23:51:28.212486624 UTC)
[    5.359621] c2    269 [BATT] Device is at booting stage at 5359610323 (1970-03-12 23:51:28.212517353 UTC)
[    5.816460] c0    505 [TP]:synaptics_rmi4_fb_notifier_cb, event = 16 blank = 0
[    5.817985] c0    505 [TP]: [ERR]:synaptics_rmi4_irq_enable: Interrupt already enabled
[    5.818033] c0    505 [BATT] fb_notifier_callback-> display is On
[    5.818034] c2    269 [BATT] batt_worker: total_time since last batt update = 466 ms.
[    5.820558] c2    269 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 1970-03-12 23:51:28, g_overheat_55_sec = 0, g_total_level_raw = 0
[    5.820568] c2    269 [BATT] calculate_batt_cycle_info: save batt cycle data every 50%
[    5.820574] c2    269 [BATT] batt_level_adjust: remap: no soc drop and no additional 1%, ui:100%
[    5.823195] c2    269 [BATT][SMBCHG] 0x1010=00,0x1210=00,0x1242=00,0x1310=01,0x1340=12,0x1608=00,0x1610=00,cc=0uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=3,pd_chgr=0,wake_reason=0,smb_curr=15mA,batfet_wa=0
[    5.823387] c2    269 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,2e,9b,80,00],CHG_CFG[F0:F4]=[0f,04,1b,00,2e],CHG_CFG[F5:F9]=[1e,00,01,02,01],CHG_CFG[FA:FF]=[1c,47,42,08,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,2a,04,d0,39]
[    5.823397] c2    269 [BATT][SMBCHG] USB_STS[07:0B]=[0d,01,00,00,08],USB_STS[0C:0F]=[00,00,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,11,ab],MISC_CFG[F0:F4]=[0f,00,12,0a,25],MISC_CFG[F5:F9]=[38,18,a3,02,00],MISC_CFG[FA:FF]=[00,06,c1,05,e1,02],SMB1351[00:06]=[06,1c,87,ef,08,11,6b,],[32]=[00]
[    5.826231] c2    269 [BATT] ID=3,level=100,level_raw=100,vol=4264mV,temp=315,current=698695uA,chg_name=NONE,chg_src=0,chg_en=0,health=1,overload=0,duration=0min,vbus=176mV,max_iusb=0mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1500mA,htc_ext=0x00,usb_temp=291,usb_overheat=0,level_accu=0 at 5826222557 (1970-03-12 23:51:28.679100420 UTC)
[    5.826241] c2    269 [BATT] Device is at booting stage at 5826230266 (1970-03-12 23:51:28.679137191 UTC)
[    5.887413] c2    509 e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[    5.887413] c2    509 
[    5.887444] c2    509 e2fsck: Pass 1: Checking inodes, blocks, and sizes
[    5.887444] c2    509 
[    5.887454] c2    509 e2fsck: Pass 2: Checking directory structure
[    5.887454] c2    509 
[    5.887462] c2    509 e2fsck: Pass 3: Checking directory connectivity
[    5.887462] c2    509 
[    5.887471] c2    509 e2fsck: Pass 4: Checking reference counts
[    5.887471] c2    509 
[    5.887479] c2    509 e2fsck: Pass 5: Checking group summary information
[    5.887479] c2    509 
[    5.887487] c2    509 e2fsck: /dev/block/bootdevice/by-name/userdata: 5297/7487488 files (10.2% non-contiguous), 1177701/29939712 blocks
[    5.887487] c2    509 
[    5.890124] c0    357 SMBCHG: usbin_uv_handler:  chip->usb_present = 0 rt_sts = 0x00 hvdcp_3_det_ignore_uv = 0 rerun_apsd_ignore_uv = 0 aicl = 1500, vbus = 5286380
[    5.890250] c0     42 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
[    5.890259] c0     42 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[    5.890366] c0     42 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
[    5.895026] c3    509 EXT4-fs (sda35): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc
[    5.895051] c3    509 SELinux: initialized (dev sda35, type ext4), uses xattr
[    5.895106] c3    509 fs_mgr: __mount(source=/dev/block/bootdevice/by-name/userdata,target=/data,type=ext4)=0
[    5.895139] c3    509 fs_mgr: /data is file encrypted
[    5.896789] c2      1 init: Starting service 'debuggerd'...
[    5.897221] c2      1 init: Starting service 'debuggerd64'...
[    5.897780] c2      1 init: Starting service 'vold'...
[    5.965566] c2    258 [BATT][PD] Set ID(0), pd_is_limited:1, List: [0]:15W(5000mV-3000mA)
[    5.979968] c0    507 msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
[    5.998948] c0    507 [AUD] snd_soc_qdsp6v2: msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
[    5.999237] c0    507 [AUD] snd_soc_qdsp6v2: msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
[    5.999502] c0    507 [AUD] snd_soc_qdsp6v2: msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
[    5.999512] c0    507 [AUD] snd_soc_qdsp6v2: msm_audio_sound_focus_get: Could not get copp idx for port_id=16385
[    5.999768] c0    507 [AUD] snd_soc_qdsp6v2: msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
[    5.999779] c0    507 [AUD] snd_soc_qdsp6v2: msm_audio_source_tracking_get: Could not get copp idx for port_id=16385
[    6.002148] c0    507 [AUD] snd_soc_qdsp6v2: msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
[    6.002666] c0    507 [AUD] snd_soc_qdsp6v2: msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
[    6.003056] c0    507 [AUD] snd_soc_qdsp6v2: msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
[    6.003100] c0    507 [AUD] snd_soc_qdsp6v2: msm_audio_sound_focus_get: Could not get copp idx for port_id=4101
[    6.003348] c0    507 [AUD] snd_soc_qdsp6v2: msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
[    6.003831] c0    507 [AUD] snd_soc_qdsp6v2: msm_audio_source_tracking_get: Could not get copp idx for port_id=4101
[    6.011414] c2    258 FUSB platform_notify_pd_contract: Contract=[1], typec_state(0x4), pd_state(0x22)
[    6.011427] c2    258 dwc3_pd_vbus_ctrl: set pd vbus flag to 0
[    6.014976] c0    507 msm_pcm_volume_ctl_get substream runtime not found
[    6.016500] c0    507 msm_pcm_volume_ctl_get substream runtime not found
[    6.018275] c0    507 msm_pcm_volume_ctl_get substream runtime not found
[    6.019045] c0    507 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    6.021208] c0    507 msm_pcm_volume_ctl_get substream runtime not found
[    6.021674] c0    507 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    6.023605] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.023616] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.023660] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.023667] c2    258 FUSB StateMachineTypeC: enter
[    6.024059] c0    507 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    6.025454] c0    507 msm_pcm_volume_ctl_get substream runtime not found
[    6.034447] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.034464] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.040282] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.040297] c2    258 FUSB StateMachineTypeC: enter
[    6.042266] c0    507 msm_pcm_volume_ctl_get substream runtime not found
[    6.042661] c0    507 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    6.048994] c0    507 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    6.051682] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.051694] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.051741] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.051747] c2    258 FUSB StateMachineTypeC: enter
[    6.052150] c0    507 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    6.055884] c0    507 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    6.057549] c0    507 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    6.058964] c0    507 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    6.063041] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.063056] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.081960] c0    507 [AUD] snd_soc_msm8996: msm_htc_ftm_get: non ftm state
[    6.081985] c0    507 [AUD] snd_soc_msm8996: ftm gpio value 0 on No.0
[    6.081993] c0    507 [AUD] snd_soc_msm8996: ftm gpio value 0 on No.1
[    6.082001] c0    507 [AUD] snd_soc_msm8996: ftm gpio value 0 on No.2
[    6.082008] c0    507 [AUD] snd_soc_msm8996: ftm gpio value 0 on No.3
[    6.108629] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.108662] c2    258 FUSB StateMachineTypeC: enter
[    6.110581] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.110590] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.110636] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.110642] c2    258 FUSB StateMachineTypeC: enter
[    6.112600] c3    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.112610] c3    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.112658] c3    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.112664] c3    258 FUSB StateMachineTypeC: enter
[    6.114585] c3    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.114595] c3    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.114639] c3    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.114645] c3    258 FUSB StateMachineTypeC: enter
[    6.116590] c3    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.116599] c3    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.116644] c3    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.116650] c3    258 FUSB StateMachineTypeC: enter
[    6.118569] c3    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.118577] c3    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.118635] c3    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.118641] c3    258 FUSB StateMachineTypeC: enter
[    6.120554] c3    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.120562] c3    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.120633] c3    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.120639] c3    258 FUSB StateMachineTypeC: enter
[    6.122538] c3    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.122549] c3    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.122622] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.122630] c2    258 FUSB StateMachineTypeC: enter
[    6.124538] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.124546] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.124594] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.124600] c2    258 FUSB StateMachineTypeC: enter
[    6.126521] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.126529] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.126576] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.126582] c2    258 FUSB StateMachineTypeC: enter
[    6.128497] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.128505] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.128555] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.128561] c2    258 FUSB StateMachineTypeC: enter
[    6.130459] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.130468] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.130533] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.130538] c2    258 FUSB StateMachineTypeC: enter
[    6.132400] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.132406] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.132460] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.132464] c2    258 FUSB StateMachineTypeC: enter
[    6.134367] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.134373] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.134425] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.134430] c2    258 FUSB StateMachineTypeC: enter
[    6.136307] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.136312] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.136361] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.136366] c2    258 FUSB StateMachineTypeC: enter
[    6.138256] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.138261] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.138333] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.138337] c2    258 FUSB StateMachineTypeC: enter
[    6.140216] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.140220] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.140266] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.140271] c2    258 FUSB StateMachineTypeC: enter
[    6.142145] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.142150] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.142214] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.142219] c2    258 FUSB StateMachineTypeC: enter
[    6.144095] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.144100] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.144151] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.144155] c2    258 FUSB StateMachineTypeC: enter
[    6.146035] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.146040] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.146084] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.146088] c2    258 FUSB StateMachineTypeC: enter
[    6.147997] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.148002] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.148091] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.148096] c2    258 FUSB StateMachineTypeC: enter
[    6.149989] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.149993] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.150032] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.150037] c2    258 FUSB StateMachineTypeC: enter
[    6.151960] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.151965] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.152069] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.152073] c2    258 FUSB StateMachineTypeC: enter
[    6.153924] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.153929] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.153998] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.154003] c2    258 FUSB StateMachineTypeC: enter
[    6.155919] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.155923] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.155998] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.156003] c2    258 FUSB StateMachineTypeC: enter
[    6.157861] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.157866] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.157915] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.157920] c2    258 FUSB StateMachineTypeC: enter
[    6.159851] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.159855] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.159907] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.159912] c2    258 FUSB StateMachineTypeC: enter
[    6.161863] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.161868] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.161966] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.161970] c2    258 FUSB StateMachineTypeC: enter
[    6.163862] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.163867] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.163922] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.163926] c2    258 FUSB StateMachineTypeC: enter
[    6.165868] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.165874] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.165929] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.165934] c2    258 FUSB StateMachineTypeC: enter
[    6.167810] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.167815] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.167866] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.167871] c2    258 FUSB StateMachineTypeC: enter
[    6.169783] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.169787] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.169830] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.169835] c2    258 FUSB StateMachineTypeC: enter
[    6.171701] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.171706] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.171752] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.171757] c2    258 FUSB StateMachineTypeC: enter
[    6.173660] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.173664] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.173707] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.173711] c2    258 FUSB StateMachineTypeC: enter
[    6.175606] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.175611] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.175668] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.175673] c2    258 FUSB StateMachineTypeC: enter
[    6.177557] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.177562] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.177607] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.177612] c2    258 FUSB StateMachineTypeC: enter
[    6.179515] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.179520] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.179566] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.179571] c2    258 FUSB StateMachineTypeC: enter
[    6.181427] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.181433] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.181489] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.181494] c2    258 FUSB StateMachineTypeC: enter
[    6.183366] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.183371] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.183428] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.183432] c2    258 FUSB StateMachineTypeC: enter
[    6.185391] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.185397] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.185451] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.185460] c2    258 FUSB StateMachineTypeC: enter
[    6.187321] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.187326] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.187371] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.187376] c2    258 FUSB StateMachineTypeC: enter
[    6.189279] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.189285] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.189334] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.189339] c2    258 FUSB StateMachineTypeC: enter
[    6.191196] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.191201] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.191255] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.191260] c2    258 FUSB StateMachineTypeC: enter
[    6.193158] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.193163] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.193217] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.193222] c2    258 FUSB StateMachineTypeC: enter
[    6.195112] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.195118] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.195172] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.195177] c2    258 FUSB StateMachineTypeC: enter
[    6.197070] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.197075] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.197125] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.197130] c2    258 FUSB StateMachineTypeC: enter
[    6.199004] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.199009] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.199060] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.199065] c2    258 FUSB StateMachineTypeC: enter
[    6.200941] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.200947] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.200997] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.201001] c2    258 FUSB StateMachineTypeC: enter
[    6.202900] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.202905] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.202952] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.202957] c2    258 FUSB StateMachineTypeC: enter
[    6.204839] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.204845] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.204894] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.204898] c2    258 FUSB StateMachineTypeC: enter
[    6.206828] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.206833] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.206879] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.206884] c2    258 FUSB StateMachineTypeC: enter
[    6.208733] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.208738] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.208816] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.208820] c2    258 FUSB StateMachineTypeC: enter
[    6.210751] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.210756] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.210810] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.210815] c2    258 FUSB StateMachineTypeC: enter
[    6.212726] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.212730] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.212782] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.212787] c2    258 FUSB StateMachineTypeC: enter
[    6.214649] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.214655] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.214704] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.214709] c2    258 FUSB StateMachineTypeC: enter
[    6.216624] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.216630] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.216713] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.216718] c2    258 FUSB StateMachineTypeC: enter
[    6.218597] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.218602] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.218667] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.218672] c2    258 FUSB StateMachineTypeC: enter
[    6.220574] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.220581] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.220637] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.220642] c2    258 FUSB StateMachineTypeC: enter
[    6.222515] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.222520] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.222568] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.222573] c2    258 FUSB StateMachineTypeC: enter
[    6.224458] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.224463] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.224508] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.224513] c2    258 FUSB StateMachineTypeC: enter
[    6.226404] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.226409] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.226459] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.226464] c2    258 FUSB StateMachineTypeC: enter
[    6.228352] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.228358] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.228415] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.228420] c2    258 FUSB StateMachineTypeC: enter
[    6.230315] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.230320] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.230364] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.230369] c2    258 FUSB StateMachineTypeC: enter
[    6.232216] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.232221] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.232275] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.232280] c2    258 FUSB StateMachineTypeC: enter
[    6.234171] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.234176] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.234232] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.234237] c2    258 FUSB StateMachineTypeC: enter
[    6.236136] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.236141] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.236190] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.236195] c2    258 FUSB StateMachineTypeC: enter
[    6.238107] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.238112] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.238162] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.238166] c2    258 FUSB StateMachineTypeC: enter
[    6.240052] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.240057] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.240108] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.240113] c2    258 FUSB StateMachineTypeC: enter
[    6.241996] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.242001] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.242060] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.242064] c2    258 FUSB StateMachineTypeC: enter
[    6.243957] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.243962] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.244017] c2    258 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++ 
[    6.244021] c2    258 FUSB StateMachineTypeC: enter
[    6.245888] c2    258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    6.245893] c2    258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 
[    6.258163] c0    507 wcdcal_hwdep_ioctl_shared: incorrect firmware size 154 for vbat
[    6.284773] c2      1 init: Not bootcharting.
[    6.286202] c2     24 get_ice_device_from_storage_type: found ice device ffffffc03202a000
[    6.287216] c2     24 get_ice_device_from_storage_type: found ice device ffffffc03202a000
[    6.433166] c2      1 init: Starting service 'exec 3 (/system/bin/tzdatacheck)'...
[    6.439684] c2      1 init: Service 'exec 3 (/system/bin/tzdatacheck)' (pid 575) exited with status 0
[    6.441530] c2      1 init: Service 'qseecomd' is being killed...
[    6.442919] c2      1 init: Service 'qseecomd' (pid 443) killed by signal 9
[    6.442936] c2      1 init: Service 'qseecomd' (pid 443) killing any children in process group
[    6.443001] c2      1 init: Untracked pid 446 killed by signal 9
[    6.446856] c3      1 sps:debugfs:input BAM physical address:0x7544000
[    6.446870] c3      1 sps:no dump option is chosen yet.init: Starting service 'exec 4 (/system/bin/otapreopt_slot)'...
[    6.489292] c2      1 init: Service 'exec 4 (/system/bin/otapreopt_slot)' (pid 576) exited with status 0
[    6.490112] c2      1 init: SELinux:  Could not stat /data/dalvik-cache/mips: No such file or directory.
[    6.490154] c2      1 init: SELinux:  Could not stat /data/dalvik-cache/mips64: No such file or directory.
[    6.490185] c2      1 init: SELinux:  Could not stat /data/dalvik-cache/x86: No such file or directory.
[    6.490216] c2      1 init: SELinux:  Could not stat /data/dalvik-cache/x86_64: No such file or directory.
[    6.490913] c2      1 init: Starting service 'exec 5 (/system/bin/recovery-persist)'...
[    6.496410] c2      1 init: Service 'exec 5 (/system/bin/recovery-persist)' (pid 579) exited with status 0
[    6.496668] c2      1 init: Starting service 'exec 6 (/system/bin/bootstat)'...
[    6.507257] c2      1 init: Service 'exec 6 (/system/bin/bootstat)' (pid 580) exited with status 0
[    6.585014] c3      1 init: Starting service 'logd-reinit'...
[    6.585416] c3      1 init: property 'persist.sys.ssr.enable_debug' doesn't exist while expanding '${persist.sys.ssr.enable_debug}'
[    6.585430] c3      1 init: write: cannot expand '${persist.sys.ssr.enable_debug}'
[    6.585446] c3      1 init: property 'persist.sys.mba_boot_timeout' doesn't exist while expanding '${persist.sys.mba_boot_timeout}'
[    6.585454] c3      1 init: write: cannot expand '${persist.sys.mba_boot_timeout}'
[    6.585468] c3      1 init: property 'persist.sys.modem_auth_timeout' doesn't exist while expanding '${persist.sys.modem_auth_timeout}'
[    6.585476] c3      1 init: write: cannot expand '${persist.sys.modem_auth_timeout}'
[    6.585490] c3      1 init: property 'persist.sys.pil_proxy_timeout' doesn't exist while expanding '${persist.sys.pil_proxy_timeout}'
[    6.585498] c3      1 init: write: cannot expand '${persist.sys.pil_proxy_timeout}'
[    6.587239] c3      1 init: Starting service 'healthd'...
[    6.587688] c3      1 init: Starting service 'per_mgr'...
[    6.588012] c3      1 init: Starting service 'qseecomd'...
[    6.588425] c3      1 init: Starting service 'irsc_util'...
[    6.588822] c3      1 init: Starting service 'rmt_storage'...
[    6.589265] c3      1 init: Starting service 'msm_irqbalance'...
[    6.589728] c3      1 init: Starting service 'lmkd'...
[    6.590235] c3      1 init: Starting service 'exec 7 (/system/bin/init.power.sh)'...
[    6.594598] c2    582 healthd: Unknown power supply type 'Wipower'
[    6.594652] c2    582 healthd: Unknown power supply type 'BMS'
[    6.594693] c2    582 healthd: Unknown power supply type 'BMS'
[    6.594824] c2    582 healthd: Unknown power supply type 'USB_Parallel'
[    6.594866] c2    582 healthd: Unknown power supply type 'BMS'
[    6.595169] c2    582 healthd: BatteryFullChargePath not found
[    6.595179] c2    582 healthd: BatteryCycleCountPath not found
[    6.597190] c2    582 healthd: battery l=100 v=4264 t=31.5 h=2 st=3 c=698 chg=
[    6.610741] c2    589 msm_thermal:store_cc_enabled Core control disabled
[    6.613834] c0    442 type=1400 audit(6133889.460:29): avc: granted { net_bind_service } for pid=586 comm="rmt_storage" capability=10 scontext=u:r:rmt:s0 tcontext=u:r:rmt:s0 tclass=capability
[    6.628508] c3      1 init: Service 'irsc_util' (pid 585) exited with status 0
[    6.629576] c2    589 msm_thermal:store_cc_enabled Core control enabled
[    6.629636] c2    589 msm_thermal:update_offline_cores cpus_offlined: 0
[    6.629683] c2    589 msm_thermal:sensor_mgr_set_threshold zone:0 Invalid trip:0
[    6.629711] c2    589 msm_thermal:sensor_mgr_set_threshold zone:0 Invalid trip:0
[    6.629742] c2    589 msm_thermal:sensor_mgr_set_threshold zone:0 Invalid trip:0
[    6.629767] c2    589 msm_thermal:sensor_mgr_set_threshold zone:0 Invalid trip:0
[    6.629797] c2    589 msm_thermal:sensor_mgr_set_threshold zone:0 Invalid trip:0
[    6.629820] c2    589 msm_thermal:sensor_mgr_set_threshold zone:0 Invalid trip:0
[    6.629849] c2    589 msm_thermal:sensor_mgr_set_threshold zone:0 Invalid trip:0
[    6.629872] c2    589 msm_thermal:sensor_mgr_set_threshold zone:0 Invalid trip:0
[    6.635771] c0    436 logd.daemon: reinit
[    6.644141] c3      1 init: Service 'logd-reinit' (pid 581) exited with status 0
[    6.662888] c3      1 init: Service 'exec 7 (/system/bin/init.power.sh)' (pid 589) exited with status 0
[    6.663211] c3      1 init: Starting service 'exec 8 (/system/bin/init.mid.sh)'...
[    6.685532] c0    442 type=1400 audit(6133889.530:30): avc: denied { search } for pid=600 comm="qseecomd" name="firmware" dev="dm-0" ino=25 scontext=u:r:tee:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    6.692488] c3      1 init: Service 'exec 8 (/system/bin/init.mid.sh)' (pid 605) exited with status 0
[    6.693766] c3      1 init: Starting service 'exec 9 (/system/bin/init.foreground.sh)'...
[    6.745171] c2    359 SMBCHG: src_detect_handler:  chip->usb_present = 0 usb_present = 1 src_detect = 1 hvdcp_3_det_ignore_uv=0
[    6.745232] c2    359 SMBCHG: handle_usb_insertion: triggered
[    6.745260] c2    359 SMBCHG: handle_usb_insertion: inserted type = 9 (USB_PD)
[    6.745266] c2    359 SMBCHG: smbchg_change_usb_supply_type: Type 9: setting mA = 3000
[    6.745272] c2    359 SMBCHG: usb_icl: 0 voting for 3000 - on
[    6.745278] c2    359 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 3000
[    6.745282] c2    359 SMBCHG: usb_suspend: 2 voting for 0 - off
[    6.745409] c0    365 SMBCHG: power_ok_handler: triggered: 0x01. prev_dischg_time_ms(0) dischg_time_ms(6133887068) diff(1838919772) count_same_dischg(0) limit_iusb(0)
[    6.745425] c2    359 SMBCHG: smbchg_set_usb_current_max: usb type = 9 current set to 3000 mA
[    6.745442] c2    359 SMBCHG: set_aicl_enable: Disable AICL...
[    6.745490] c2    359 SMBCHG: smbchg_rerun_aicl: PD charger donot rerun AICL.
[    6.745495] c2    359 SMBCHG: smbchg_stay_awake: staying awake: 0x01 (bit 1)
[    6.745517] c2    359 msm-dwc3 6a00000.ssusb: dwc3_msm_power_set_property_usb TCXO enabled
[    6.745620] c2    359 SMBCHG: set_aicl_enable: Disable AICL...
[    6.745671] c2    359 SMB1351 smb1351_parallel_set_chg_present: set slave present = 0 -> 1
[    6.745833] c2    263 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[    6.747589] c2    263 [BATT] htc_batt_stats_1.1: begin charging: level=100, at=1970-03-12 23:51:29 UTC
[    6.747604] c2    263 [BATT] charger_exist_lock Lock at 6747596451 (1970-03-12 23:51:29.600499835 UTC)
[    6.747886] c2     58 [BATT] batt_worker: total_time since last batt update = 930 ms.
[    6.748226] c3    359 SMB1351 smb1351_usb_suspend: reason = 4 requested_suspend = 1 suspended_status = 20 -> 20
[    6.748509] c3    359 SMB1351 smb1351_usb_suspend: reason = 16 requested_suspend = 0 suspended_status = 20 -> 4
[    6.748650] c2    263 [BATT] chg_full_check_worker: vol:4264, curr=698, is_full_count=0, is_full=0 at 6748640514 (1970-03-12 23:51:29.601544575 UTC)
[    6.751348] c2     58 [BATT] set_batt_psy_property. value(1) prop(89) at 6751343066 (1970-03-12 23:51:29.604241867 UTC)
[    6.751366] c2     58 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 1970-03-12 23:51:28, g_overheat_55_sec = 0, g_total_level_raw = 0
[    6.751371] c2     58 [BATT] calculate_batt_cycle_info: save batt cycle data every 50%
[    6.751377] c2     58 [BATT] batt_level_adjust: pre_level=100, new_level=100, level would use raw level!
[    6.751384] c2     58 SMBCHG: pmi8994_set_float_voltage_comp: set vfloat comp = 0
[    6.751446] c2     58 [BATT] ibat_max=2800000,ibat_new=1400000,prev_vol_limit=1,prev_ibat_health=1,chg_limit_reason=0,prev_screen_warm=0,prev_screen_hot=0,is_over_ibat=0,htc_batt_info.state=0x0 at 6751435566 (1970-03-12 23:51:29.604339575 UTC)
[    6.751454] c2     58 [BATT] set ibat max(1400000),ibat_total=2600000[2600000,0],ibat_total_new=1400000,is_parallel=0 at 6751443379 (1970-03-12 23:51:29.604348846 UTC)
[    6.751461] c2     58 [BATT] set_batt_psy_property. value(1400000) prop(32) at 6751449993 (1970-03-12 23:51:29.604356606 UTC)
[    6.751468] c2     58 SMBCHG: smbchg_set_fastchg_current_user: User setting FCC to 1400
[    6.751473] c2     58 SMBCHG: fcc: 1 voting for 1400 - on
[    6.751528] c2     58 SMBCHG: smbchg_set_fastchg_current_raw: fastcharge current requested 1400, set to 1400
[    6.751536] c2     58 [BATT] set charging_enable(1) at 6751525566 (1970-03-12 23:51:29.604432388 UTC)
[    6.751542] c2     58 [BATT] set_batt_psy_property. value(1) prop(68) at 6751532076 (1970-03-12 23:51:29.604438638 UTC)
[    6.751549] c2     58 [BATT] set pwrsrc_enable(1) at 6751539004 (1970-03-12 23:51:29.604445669 UTC)
[    6.751556] c2     58 [BATT] set_batt_psy_property. value(1) prop(69) at 6751545514 (1970-03-12 23:51:29.604451971 UTC)
[    6.754236] c2     58 [BATT][SMBCHG] 0x1010=00,0x1210=00,0x1242=00,0x1310=04,0x1340=07,0x1608=10,0x1610=01,cc=0uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=3,pd_chgr=1,wake_reason=1,smb_curr=15mA,batfet_wa=0
[    6.754408] c2     58 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,2e,8b,89,00],CHG_CFG[F0:F4]=[0f,04,0b,00,2e],CHG_CFG[F5:F9]=[00,00,01,02,01],CHG_CFG[FA:FF]=[1c,47,42,08,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,2a,04,d0,39]
[    6.754417] c2     58 [BATT][SMBCHG] USB_STS[07:0B]=[1f,02,02,08,08],USB_STS[0C:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,1f,00,11,ab],MISC_CFG[F0:F4]=[0f,00,12,0a,25],MISC_CFG[F5:F9]=[38,18,a3,02,00],MISC_CFG[FA:FF]=[00,06,c1,05,e1,02],SMB1351[00:06]=[06,1c,87,ef,08,11,6b,],[32]=[00]
[    6.757030] c2     58 [BATT] cable_impedance: 0, R_cable_impedance: 0, aicl_result: 0 at 6757021869 (1970-03-12 23:51:29.609923274 UTC)
[    6.757082] c2     58 [BATT] ID=3,level=100,level_raw=100,vol=4264mV,temp=315,current=698695uA,chg_name=PD5V_3A,chg_src=2,chg_en=2,health=1,overload=0,duration=0min,vbus=4892mV,max_iusb=3000mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=3000mA,htc_ext=0x00,usb_temp=288,usb_overheat=0,level_accu=0 at 6757072702 (1970-03-12 23:51:29.609961555 UTC)
[    6.757090] c2     58 [BATT] Device is at booting stage at 6757079473 (1970-03-12 23:51:29.609986294 UTC)
[    6.758949] c3      1 init: Service 'exec 9 (/system/bin/init.foreground.sh)' (pid 614) exited with status 0
[    6.759973] c3      1 init: write_file: Unable to open '/proc/sys/kernel/sched_boost': No such file or directory
[    6.759999] c3      1 init: write_file: Unable to open '/sys/devices/soc/75ba000.i2c/i2c-12/12-0020/input/input0/update_fw': No such file or directory
[    6.761371] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet0/accept_ra': No such file or directory
[    6.761397] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet1/accept_ra': No such file or directory
[    6.761417] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet2/accept_ra': No such file or directory
[    6.761438] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet3/accept_ra': No such file or directory
[    6.761458] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet4/accept_ra': No such file or directory
[    6.761478] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet5/accept_ra': No such file or directory
[    6.761498] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet6/accept_ra': No such file or directory
[    6.761519] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet7/accept_ra': No such file or directory
[    6.761539] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio0/accept_ra': No such file or directory
[    6.761559] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio1/accept_ra': No such file or directory
[    6.761578] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio2/accept_ra': No such file or directory
[    6.761598] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio3/accept_ra': No such file or directory
[    6.761618] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio4/accept_ra': No such file or directory
[    6.761638] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio5/accept_ra': No such file or directory
[    6.761657] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio6/accept_ra': No such file or directory
[    6.761676] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio7/accept_ra': No such file or directory
[    6.761695] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb0/accept_ra': No such file or directory
[    6.761714] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb1/accept_ra': No such file or directory
[    6.761734] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb2/accept_ra': No such file or directory
[    6.761753] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb3/accept_ra': No such file or directory
[    6.762360] c3      1 enable_store: android_usb: already disabled
[    6.762526] c3      1 init: Starting service 'adbd'...
[    6.762866] c3      1 init: write_file: Unable to open '/sys/class/leds/wled/brightness': No such file or directory
[    6.763064] c3      1 init: Starting service 'per_proxy'...
[    6.763613] c3      1 init: Starting service 'exec 10 (/system/bin/update_verifier)'...
[    6.780122] c3    621 read descriptors
[    6.780162] c3    621 read strings
[    6.783410] c2    263 dwc3_notify_vbus_work: pd_vbus_change = 0
[    6.783423] c2    263 dwc3_notify_vbus_work: maybe cable out or SINK first connect, resume state machine
[    6.783458] c2    263 [USB] b_sess_vld, chg_type=5, PolicyIsDFP=0, dwc3_vbus_boost=0
[    6.783474] c2    263 msm-dwc3 6a00000.ssusb: dwc3_msm_resume xo_vote_for_charger = 1
[    6.785120] c2    596 subsys-restart: __subsystem_get(): Changing subsys fw_name to modem
[    6.785830] c2    263 [USB] USB3_QSERDES_TX_DRV_LVL = 0x13
[    6.787167] c2    263 msm-dwc3 6a00000.ssusb: DWC3 exited from low power mode
[    6.788898] c3      1 init: Service 'exec 10 (/system/bin/update_verifier)' (pid 620) exited with status 0
[    6.788965] c3      1 init: cannot find '/system/bin/install-recovery.sh' (No such file or directory), disabling 'flash_recovery'
[    6.789175] c3      1 init: Starting service 'thermal-engine'...
[    6.789644] c3      1 init: Starting service 'adsprpcd'...
[    6.790009] c2    596 IPA received MPSS BEFORE_POWERUP
[    6.790085] c3      1 init: Starting service 'imsqmidaemon'...
[    6.790486] c2    596 ipa ipa2_uc_state_check:301 uC is not loaded
[    6.790508] c2    596 ipa ipa_sps_irq_control_all:937 EP (5) not allocated.
[    6.790559] c3      1 init: Starting service 'ssr_setup'...
[    6.791053] c3      1 init: Starting service 'port-bridge'...
[    6.791330] c2    596 IPA BEFORE_POWERUP handling is complete
[    6.791494] c3      1 init: Starting service 'netmgrd'...
[    6.791995] c3      1 init: Service qti does not have a SELinux domain defined.
[    6.792081] c2    596 pil-q6v5-mss 2080000.qcom,mss: modem: loading from 0x0000000088800000 to 0x000000008e9f0000
[    6.792141] c3      1 init: Starting service 'perfd'...
[    6.792639] c3      1 init: Starting service 'zygote'...
[    6.793078] c3      1 init: Starting service 'zygote_secondary'...
[    6.793617] c3      1 init: Starting service 'cameraserver'...
[    6.794091] c3      1 init: Starting service 'drm'...
[    6.794557] c3      1 init: Starting service 'installd'...
[    6.795040] c3      1 init: Starting service 'keystore'...
[    6.795515] c3      1 init: Starting service 'mediacodec'...
[    6.795974] c3      1 init: Starting service 'mediadrm'...
[    6.796440] c3      1 init: Starting service 'mediaextractor'...
[    6.798208] c3      1 init: Starting service 'media'...
[    6.798741] c3      1 init: Starting service 'netd'...
[    6.799223] c3      1 init: Starting service 'ril-daemon'...
[    6.799841] c3      1 init: Starting service 'fingerprintd'...
[    6.800768] c2    405 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[    6.800878] c2    405 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[    6.806136] c2    582 healthd: battery l=100 v=4264 t=31.5 h=2 st=5 c=698 chg=a
[    6.807565] c3    582 healthd: battery l=100 v=4264 t=31.5 h=2 st=5 c=698 chg=a
[    6.808524] c3    582 healthd: battery l=100 v=4264 t=31.5 h=2 st=5 c=698 chg=a
[    6.809419] c3    582 healthd: battery l=100 v=4264 t=31.5 h=2 st=5 c=698 chg=a
[    6.810342] c3    582 healthd: battery l=100 v=4264 t=31.5 h=2 st=5 c=698 chg=a
[    6.818918] c3      1 init: Starting service 'time_daemon'...
[    6.819437] c3      1 init: Starting service 'cnd'...
[    6.819945] c3      1 init: Starting service 'cnss_diag'...
[    6.820532] c3      1 init: Starting service 'cnss-daemon'...
[    6.821045] c3      1 init: Starting service 'loc_launcher'...
[    6.821536] c3      1 init: Starting service 'init-radio-sh'...
[    6.822107] c3      1 init: Starting service 'nanohub_slpi'...
[    6.822636] c3      1 init: Starting service 'gatekeeperd'...
[    6.823205] c3      1 init: Starting service 'update_engine'...
[    6.825185] c3      1 init: Service 'ssr_setup' (pid 631) exited with status 0
[    6.825692] c0    629 'opened /dev/adsprpc-smd c 215 0'
[    6.832515] c3    634 devbw soc:qcom,cpubw: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    6.868276] c2    442 type=1400 audit(6133889.716:31): avc: denied { read write } for pid=630 comm="imsqmidaemon" name="diag" dev="tmpfs" ino=15154 scontext=u:r:ims:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0
[    6.868547] c2    596 pil-q6v5-mss 2080000.qcom,mss: Debug policy not present - msadp. Continue.
[    6.873592] c2    596 pil-q6v5-mss 2080000.qcom,mss: Loading MBA and DP (if present) from 0x00000000f7100000 to 0x00000000f7200000 size 100000
[    6.889121] c2      1 init: Starting service 'imsdatadaemon'...
[    6.922774] c2    442 type=1400 audit(6133889.770:32): avc: denied { dac_override } for pid=670 comm="thermal-engine" capability=1 scontext=u:r:thermal-engine:s0 tcontext=u:r:thermal-engine:s0 tclass=capability permissive=0
[    6.926823] c2    442 type=1400 audit(6133889.773:33): avc: denied { dac_override } for pid=633 comm="netmgrd" capability=1 scontext=u:r:netmgrd:s0 tcontext=u:r:netmgrd:s0 tclass=capability permissive=0
[    6.931979] c2      1 init: Service 'cnss_diag' (pid 651) exited with status 255
[    6.936898] c2    442 type=1400 audit(6133889.780:34): avc: denied { dac_override } for pid=651 comm="cnss_diag" capability=1 scontext=u:r:cnss_diag:s0 tcontext=u:r:cnss_diag:s0 tclass=capability permissive=0
[    6.945248] c2    596 pil-q6v5-mss 2080000.qcom,mss: MBA boot done
[    6.945435] c3    655 'opened /dev/sdsprpc-smd c 215 1'
[    6.994540] c2    442 type=1400 audit(6133889.843:35): avc: granted { net_admin } for pid=652 comm="cnss-daemon" capability=12 scontext=u:r:cnss-daemon:s0 tcontext=u:r:cnss-daemon:s0 tclass=capability
[    6.996829] c2      1 init: Service 'init-radio-sh' (pid 654) exited with status 0
[    7.009238] c3    759 msm_thermal:interrupt_mode_init switch to interrupt mode
[    7.009238] c3    759 ,
[    7.009282] c3    759 msm_thermal:disable_msm_thermal Max frequency reset for CPU0
[    7.009289] c3    759 msm_thermal:disable_msm_thermal Max frequency reset for CPU1
[    7.009293] c3    759 msm_thermal:disable_msm_thermal Max frequency reset for CPU2
[    7.009298] c3    759 msm_thermal:disable_msm_thermal Max frequency reset for CPU3
[    7.012168] c0    301 msm_thermal:hotplug_notify tsens_tz_sensor9 reach temp threshold: 648
[    7.021309] c3    759 msm_thermal:set_enabled enabled = 0
[    7.021460] c1    442 type=1400 audit(6133889.846:36): avc: denied { read write } for pid=754 comm="cnss-daemon" name="diag" dev="tmpfs" ino=15154 scontext=u:r:cnss-daemon:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0
[    7.022214] c3    759 msm_thermal:store_cpus_offlined "thermal-engine"(PID:759) request cpus offlined mask 0 
[    7.031929] c1    442 type=1400 audit(1505257742.562:37): avc: denied { read write } for pid=768 comm="time_daemon" name="diag" dev="tmpfs" ino=15154 scontext=u:r:time:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0
[    7.044025] c0    644 dwc3 dwc3_gadget_conndone_interrupt: usb conn speed = 3
[    7.057548] c1    442 type=1400 audit(1505257742.572:38): avc: denied { read write } for pid=650 comm="cnd" name="diag" dev="tmpfs" ino=15154 scontext=u:r:cnd:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0
[    7.058638] c0    469 android_work: [USB] android_work: sw_suspended 0, suspended 0 config 0,connect2pc 0
[    7.058653] c0    469 android_work: [USB] android_work: sw_connected 0, connected 1 last_uevent 0
[    7.058753] c0    469 android_work: android_work: sent uevent USB_STATE=CONNECTED
[    7.058760] c0    469 android_work: [USB] android_work: set usb_connect2pc = 1
[    7.095632] c0    350 SMBCHG: fastchg_handler: p2f triggered
[    7.095663] c0    350 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[    7.098346] c2    582 healthd: battery l=100 v=4264 t=31.5 h=2 st=5 c=698 chg=a
[    7.114398] c1    458 nanohub: nanohub_bl_read_memory: status=79, addr=08000000, length=173396
[    7.115232] c1    458 nanohub: i=0, erase=0, erase_write=1, write=0
[    7.115244] c1    458 nanohub: i=1, erase=0, erase_write=1, write=0
[    7.115250] c1    458 nanohub: i=2, erase=0, erase_write=1, write=0
[    7.115255] c1    458 nanohub: i=3, erase=0, erase_write=1, write=0
[    7.115286] c1    458 nanohub nanohub: nanohub_download_bl: status=79
[    7.127479] c2    442 type=1400 audit(1505257742.659:39): avc: denied { read write } for pid=668 comm="imsdatadaemon" name="diag" dev="tmpfs" ino=15154 scontext=u:r:ims:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0
[    7.129464] c0     67 android_usb gadget: high-speed config #1: 66bf0c8.android_usb
[    7.129527] c0     67 msm-dwc3 6a00000.ssusb: Avail curr from USB = 500
[    7.130970] c0     42 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[    7.131075] c0     42 android_work: [USB] android_work: sw_suspended 0, suspended 0 config 1,connect2pc 1
[    7.131082] c0     42 android_work: [USB] android_work: sw_connected 1, connected 1 last_uevent 1
[    7.132157] c2    582 healthd: battery l=100 v=4264 t=31.5 h=2 st=5 c=698 chg=a
[    7.133739] c2    582 healthd: battery l=100 v=4264 t=31.5 h=2 st=5 c=698 chg=a
[    7.183499] c0     42 android_work: android_work: sent uevent USB_STATE=CONFIGURED
[    7.246768] c2     24 SMBCHG: smbchg_parallel_usb_en_work: AICL at 3000
[    7.246824] c2     24 SMBCHG: smbchg_is_parallel_usb_ok: FCC 1400 lower than 2400
[    7.246830] c2     24 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 1)
[    7.543191] c0    507 msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
[    7.553133] c0    507 [AUD] snd_soc_qdsp6v2: msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
[    7.553342] c0    507 [AUD] snd_soc_qdsp6v2: msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
[    7.553919] c0    507 [AUD] snd_soc_qdsp6v2: msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
[    7.553965] c0    507 [AUD] snd_soc_qdsp6v2: msm_audio_sound_focus_get: Could not get copp idx for port_id=16385
[    7.554457] c0    507 [AUD] snd_soc_qdsp6v2: msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
[    7.554575] c0    507 [AUD] snd_soc_qdsp6v2: msm_audio_source_tracking_get: Could not get copp idx for port_id=16385
[    7.555146] c0    507 [AUD] snd_soc_qdsp6v2: msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
[    7.555631] c0    507 [AUD] snd_soc_qdsp6v2: msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
[    7.555946] c0    507 [AUD] snd_soc_qdsp6v2: msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
[    7.555956] c0    507 [AUD] snd_soc_qdsp6v2: msm_audio_sound_focus_get: Could not get copp idx for port_id=4101
[    7.556320] c0    507 [AUD] snd_soc_qdsp6v2: msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
[    7.556333] c0    507 [AUD] snd_soc_qdsp6v2: msm_audio_source_tracking_get: Could not get copp idx for port_id=4101
[    7.559888] c0    507 msm_pcm_volume_ctl_get substream runtime not found
[    7.561565] c0    507 msm_pcm_volume_ctl_get substream runtime not found
[    7.562436] c0    507 msm_pcm_volume_ctl_get substream runtime not found
[    7.562854] c0    507 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    7.565248] c0    507 msm_pcm_volume_ctl_get substream runtime not found
[    7.565768] c0    507 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    7.567489] c0    507 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    7.568910] c0    507 msm_pcm_volume_ctl_get substream runtime not found
[    7.570543] c0    507 msm_pcm_volume_ctl_get substream runtime not found
[    7.570991] c0    507 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    7.572354] c0    507 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    7.573825] c0    507 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    7.575185] c0    507 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    7.576482] c0    507 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    7.578782] c0    507 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    7.597116] c0    507 [AUD] snd_soc_msm8996: msm_htc_ftm_get: non ftm state
[    7.597141] c0    507 [AUD] snd_soc_msm8996: ftm gpio value 0 on No.0
[    7.597149] c0    507 [AUD] snd_soc_msm8996: ftm gpio value 0 on No.1
[    7.597156] c0    507 [AUD] snd_soc_msm8996: ftm gpio value 0 on No.2
[    7.597163] c0    507 [AUD] snd_soc_msm8996: ftm gpio value 0 on No.3
[    7.599622] c0    507 tasha_codec tasha_codec: tasha_mad_input_put: mic bias source not found for input = DMIC1
[    7.750077] c2     24 SMBCHG: smbchg_parallel_usb_en_work: AICL at 3000
[    7.750117] c2     24 SMBCHG: smbchg_is_parallel_usb_ok: Not in fast charge, skipping
[    7.775904] c0    635 irq 354, desc: ffffffc0f93fae00, depth: 0, count: 0, unhandled: 0
[    7.775924] c0    635 ->handle_irq():  ffffffc00032ced0, msm_gpio_irq_handler+0x0/0x148
[    7.775943] c0    635 ->irq_data.chip(): ffffffc001570d28, gic_chip+0x0/0xe8
[    7.775957] c0    635 ->action():           (null)
[    7.775963] c0    635    IRQ_NOPROBE set
[    7.775968] c0    635  IRQ_NOREQUEST set
[    7.775973] c0    635   IRQ_NOTHREAD set
[    7.776319] c0    637 irq 354, desc: ffffffc0f93fae00, depth: 0, count: 0, unhandled: 0
[    7.776335] c0    637 ->handle_irq():  ffffffc00032ced0, msm_gpio_irq_handler+0x0/0x148
[    7.776351] c0    637 ->irq_data.chip(): ffffffc001570d28, gic_chip+0x0/0xe8
[    7.776363] c0    637 ->action():           (null)
[    7.776368] c0    637    IRQ_NOPROBE set
[    7.776373] c0    637  IRQ_NOREQUEST set
[    7.776377] c0    637   IRQ_NOTHREAD set
[    7.846955] c0    563 tfa98xx_spk_event(): event 2
[    7.876911] c2    268 sps: BAM device 0x0000000007584000 is not registered yet.
[    7.877108] c2    268 sps:BAM 0x0000000007584000 is registered.
[    7.877430] c3    268 sps:BAM 0x0000000007584000 (va:0xffffff80059c0000) enabled: ver:0x19, number of pipes:24
[    7.890450] c2    442 type=1400 audit(1505257743.422:40): avc: denied { read } for pid=847 comm="BootAnimation::" name="system" dev="sda35" ino=2670593 scontext=u:r:bootanim:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=0
[    7.955103] c3    637 msm_pm_qos_add_request: add request
[    7.958640] c3      1 init: Service 'flash-nanohub-fw' (pid 458) exited with status 0
[    7.965164] c3    637 msm_sensor_fill_eeprom_subdevid_by_name:208 Eeprom userspace probe for sony_imx378
[    7.981655] c2    637 msm_cci_init:1385: hw_version = 0x10040000
[    7.982991] c2    637 imx378_htc probe succeeded
[    7.989950] c0    596 pil-q6v5-mss 2080000.qcom,mss: modem: Brought out of reset
[    8.012943] c3    637 msm_sensor_fill_eeprom_subdevid_by_name:208 Eeprom userspace probe for sony_imx179
[    8.026592] c1    637 msm_cci_init:1385: hw_version = 0x10040000
[    8.026962] c1    637 imx179_htc probe succeeded
[    8.043535] c3    637 msm_csid_init: CSID_VERSION = 0x30050000
[    8.044008] c0    636 msm_csid_irq CSID0_IRQ_STATUS_ADDR = 0x800
[    8.045458] c3    637 msm_csid_init: CSID_VERSION = 0x30050000
[    8.045909] c0      0 msm_csid_irq CSID1_IRQ_STATUS_ADDR = 0x800
[    8.059609] c2    637 msm_cci_init:1385: hw_version = 0x10040000
[    8.085844] c0      0 pil-q6v5-mss 2080000.qcom,mss: Subsystem error monitoring/handling services are up
[    8.085938] c0    339 pil-q6v5-mss 2080000.qcom,mss: modem: Power/Clock ready interrupt received
[    8.093083] c0    301 msm_thermal:hotplug_notify tsens_tz_sensor11 reach temp threshold: 648
[    8.095017] c1    339 M-Notify: General: 7
[    8.095051] c1    596 IPA received MPSS AFTER_POWERUP
[    8.095057] c1    596 IPA AFTER_POWERUP handling is complete
[    8.174404] c0     52 sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and modem's SSCTL service
[    8.355884] c3    637 msm_cci_init:1385: hw_version = 0x10040000
[    8.356637] c0    469 apr_tal:Modem Is Up
[    8.359552] c2    869 diag: In socket_open_client, socket not initialized for MODEM_CMD
[    8.359638] c2    869 diag: In diag_send_feature_mask_update, control channel is not open, p: 0, 0000000000000000
[    8.360854] c1    442 type=1400 audit(1505257743.889:41): avc: denied { create } for pid=869 comm="kworker/u8:7" scontext=u:r:kernel:s0 tcontext=u:r:kernel:s0 tclass=socket permissive=0
[    8.552897] c1    869 Sending QMI_IPA_INIT_MODEM_DRIVER_REQ_V01
[    8.554410] c1    518 ipa-wan handle_indication_req:133 not send indication
[    8.554621] c3    869 QMI_IPA_INIT_MODEM_DRIVER_REQ_V01 response received
[    8.554760] c1    518 ipa ipa_uc_response_hdlr:461 IPA uC loaded
[    8.554827] c1    518 ipa ipa_sps_irq_control_all:937 EP (5) not allocated.
[    8.557320] c1    518 ipa ipa_sps_irq_control_all:937 EP (5) not allocated.
[    8.558712] c0    518 ipa ipa_uc_wdi_event_log_info_handler:338 WDI stats ofst=0x45130
[    8.558755] c0    518 ipa ipa_sps_irq_control_all:937 EP (5) not allocated.
[    8.867366] c3    637 MSM-CPP cpp_init_hardware:863 CPP HW Version: 0x60000000
[    8.867380] c3    637 MSM-CPP cpp_init_hardware:881 stream_cnt:0
[    8.867642] c2    442 type=1400 audit(1505257744.399:42): avc: denied { search } for pid=637 comm="cameraserver" name="firmware" dev="dm-0" ino=25 scontext=u:r:cameraserver:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    8.867742] c2    442 type=1400 audit(1505257744.399:43): avc: denied { search } for pid=637 comm="cameraserver" name="firmware" dev="dm-0" ino=25 scontext=u:r:cameraserver:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    8.867790] c2    442 type=1400 audit(1505257744.399:44): avc: denied { search } for pid=637 comm="cameraserver" name="firmware" dev="dm-0" ino=25 scontext=u:r:cameraserver:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    9.332336] c0    563 tfa98xx_spk_event(): event 4
[    9.355091] c0    637 msm_pm_qos_update_request: update request 100
[    9.355114] c0    637 msm_pm_qos_update_request: update request -1<6>[    9.359829] c0   1047 msm_csid_init: CSID_VERSION = 0x30050000
[    9.360977] c0   1047 msm_csid_irq CSID0_IRQ_STATUS_ADDR = 0x800
[    9.383164] c0   1047 msm_cci_init:1385: hw_version = 0x10040000
[    9.383316] c0   1064 MSM-CPP cpp_init_hardware:863 CPP HW Version: 0x60000000
[    9.383332] c0   1064 MSM-CPP cpp_init_hardware:881 stream_cnt:0
[    9.504749] c3    442 type=1400 audit(1505257745.035:45): avc: denied { search } for pid=1077 comm="CAM_MctServ" name="graphics" dev="tmpfs" ino=15258 scontext=u:r:cameraserver:s0 tcontext=u:object_r:graphics_device:s0 tclass=dir permissive=0
[    9.509224] c1     52 [FLT] qpnp_flash_led_work: brt = 0
[    9.511605] c1     52 SMBCHG: smbchg_switch_buck_frequency: Fsw not changed, flash_active: 0
[    9.511623] c1     52 SMBCHG: smbchg_otg_pulse_skip_disable: enabling pulse skip, reason 2
[    9.524594] c0    637 msm_pm_qos_update_request: update request 100
[    9.524616] c0    637 msm_pm_qos_update_request: update request -1<6>[    9.527463] c0   1105 msm_csid_init: CSID_VERSION = 0x30050000
[    9.528131] c0   1105 msm_csid_irq CSID1_IRQ_STATUS_ADDR = 0x800
[    9.538049] c0   1116 MSM-CPP cpp_init_hardware:863 CPP HW Version: 0x60000000
[    9.538068] c0   1116 MSM-CPP cpp_init_hardware:881 stream_cnt:0
[    9.549114] c0   1105 msm_cci_init:1385: hw_version = 0x10040000
[    9.566028] c0    442 type=1400 audit(1505257745.095:46): avc: denied { search } for pid=1126 comm="CAM_MctServ" name="graphics" dev="tmpfs" ino=15258 scontext=u:r:cameraserver:s0 tcontext=u:object_r:graphics_device:s0 tclass=dir permissive=0
[    9.968525] c0    442 type=1400 audit(1505257745.499:47): avc: granted { net_admin } for pid=1191 comm="lowi-server" capability=12 scontext=u:r:location:s0 tcontext=u:r:location:s0 tclass=capability
[   10.014921] c2    442 type=1400 audit(1505257745.545:48): avc: granted { net_raw } for pid=1193 comm="slim_daemon" capability=13 scontext=u:r:location:s0 tcontext=u:r:location:s0 tclass=capability
[   10.216463] c1    518 smd_write_segment_avail: non-packet channel specified
[   10.263760] c1      1 init: Starting service 'ims_rtp_daemon'...
[   10.266774] c1      1 init: Starting service 'imscmservice'...
[   10.550277] c2    442 type=1400 audit(1505257746.082:49): avc: denied { read write } for pid=1262 comm="ims_rtp_daemon" name="diag" dev="tmpfs" ino=15154 scontext=u:r:ims:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0
[   10.760109] c2    405 [Cable impedance] Incorrect charger type, ignore detection.
[   11.393774] c1   1303 ipa ipa_sps_irq_control_all:937 EP (5) not allocated.
[   11.395130] c1   1303 ipa ipa_sps_irq_control_all:937 EP (5) not allocated.
[   11.397246] c1   1303 ipa-wan ipa_wwan_ioctl:1525 get AGG size 8192 count 10
[   11.397864] c1   1303 ipa ipa_sps_irq_control_all:937 EP (5) not allocated.
[   11.399368] c1   1303 ipa ipa_assign_policy:2973 get close-by 8192
[   11.399385] c1   1303 ipa ipa_assign_policy:2979 set rx_buff_sz 7680
[   11.399392] c1   1303 ipa ipa_assign_policy:3001 set aggr_limit 6
[   11.411030] c1   1303 ipa-wan ipa_wwan_ioctl:1431 dev(rmnet_data0) register to IPA
[   11.456111] c3   1303 ipa-wan ipa_wwan_ioctl:1431 dev(rmnet_data1) register to IPA
[   11.497624] c2   1303 ipa-wan ipa_wwan_ioctl:1431 dev(rmnet_data2) register to IPA
[   11.544407] c3   1303 ipa-wan ipa_wwan_ioctl:1431 dev(rmnet_data3) register to IPA
[   11.587826] c1   1303 ipa-wan ipa_wwan_ioctl:1431 dev(rmnet_data4) register to IPA
[   11.627628] c1   1303 ipa-wan ipa_wwan_ioctl:1431 dev(rmnet_data5) register to IPA
[   11.670381] c3   1303 ipa-wan ipa_wwan_ioctl:1431 dev(rmnet_data6) register to IPA
[   11.714898] c1   1303 ipa-wan ipa_wwan_ioctl:1431 dev(rmnet_data7) register to IPA
[   12.549304] c2      0 NOHZ: local_softirq_pending 08
[   12.573608] c0   1494 HTB: quantum of class 10001 is big. Consider r2q change.
[   12.591923] c0   1495 HTB: quantum of class 10010 is big. Consider r2q change.
[   14.090692] c0      0 NOHZ: local_softirq_pending 08
[   15.096146] c0      0 NOHZ: local_softirq_pending 08
[   16.106841] c0      0 NOHZ: local_softirq_pending 08
[   16.465440] c0   1508 input: uinput-folio as /devices/virtual/input/input9
[   16.472970] c2    582 healthd: battery l=100 v=4264 t=31.7 h=2 st=5 c=698 chg=a
[   18.067240] c3   1144 acc_open
[   18.067274] c3   1144 acc_release
[   18.188993] c3    648 QSEECOM: qseecom_load_app: App (fpctzappfingerprint) does'nt exist, loading apps for first time
[   18.820176] c3    648 QSEECOM: qseecom_load_app: App with id 6 (fpctzappfingerprint) now loaded
[   18.837589] c3    648 input: uinput-fpc as /devices/virtual/input/input10
[   19.415720] c0    280 FG: fg_soc_irq_handler: triggered 0x25
[   19.416313] c0    469 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
[   19.416341] c0    469 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[   19.417759] c0     42 FG: fg_is_batt_id_valid: fg batt sts 0x8
[   19.431322] c0    582 healthd: battery l=100 v=4264 t=31.7 h=2 st=5 c=698 chg=a
[   19.447140] c0    582 healthd: battery l=100 v=4402 t=31.7 h=2 st=5 c=-171 chg=a
[   19.462369] c0     42 SMBCHG: smbchg_vfloat_adjust_work: sample number = 0 vbat_mv = 4402 ibat_ua = -171202
[   19.462394] c0     42 SMBCHG: smbchg_vfloat_adjust_work: Skip 1 samples; max = 4402
[   19.475719] c1   1563 SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[   19.476507] c1   1563 SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[   19.477468] c1   1563 SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[   19.478555] c1   1573 FUSE: SHORTCIRCUIT enabled [sdcard : 1573]!
[   19.478611] c1   1572 FUSE: SHORTCIRCUIT enabled [sdcard : 1572]!
[   19.478928] c2   1574 FUSE: SHORTCIRCUIT enabled [sdcard : 1574]!
[   19.693512] c0     42 get_ice_device_from_storage_type: found ice device ffffffc03202a000
[   19.694678] c0     42 get_ice_device_from_storage_type: found ice device ffffffc03202a000
[   19.706348] c0   1211 fwpath_changed_handler : new_mode : sta, present_mode : 
[   19.706372] c0   1211 kickstart_driver: load: 1 wlan_hdd_inited: 0, mode_change: 1 caller: fwpath_changed_handler
[   19.706398] c0   1211 wlan: loading driver v4.4.25.029
[   19.743528] c0   1211 msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
[   19.747527] c0   1211 msm_pcie_enable: PCIe RC0 PHY is ready!
[   19.758801] c0   1211 msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
[   19.801318] c1   1211 msm_pcie_enable: PCIe RC0 link initialized
[   19.804424] c1    442 type=1400 audit(1505257755.332:50): avc: denied { search } for pid=1211 comm="Binder:645_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   19.804695] c1    442 type=1400 audit(1505257755.332:51): avc: denied { search } for pid=1211 comm="Binder:645_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   19.804797] c1    442 type=1400 audit(1505257755.332:52): avc: denied { search } for pid=1211 comm="Binder:645_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   19.810189] c1   1211 hif_pci_probe:, con_mode= 0x0
[   19.810207] c1   1211 PCI device id is 003e :003e
[   19.810226] c1   1211 cnss_wlan_pci 0000:01:00.0: BAR 0: assigned [mem 0x0c400000-0x0c5fffff 64bit]
[   19.810300] c1   1211 cnss_wlan_pci 0000:01:00.0: enabling device (0000 -> 0002)
[   19.811804] c1   1211 
[   19.811804] c1   1211  hif_pci_configure : num_desired MSI set to 0
[   19.811887] c1   1211 
[   19.811887] c1   1211  Using PCI Legacy Interrupt
[   19.844209] c1    442 type=1400 audit(1505257755.375:53): avc: denied { search } for pid=1211 comm="Binder:645_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   19.844486] c1    442 type=1400 audit(1505257755.375:54): avc: denied { search } for pid=1211 comm="Binder:645_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   19.844687] c1    442 type=1400 audit(1505257755.375:55): avc: denied { search } for pid=1211 comm="Binder:645_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   19.851443] c1   1211 wlan: [1211:E :HDD] hdd_apply_cfg_ini: Reg Parameter gRrmOperChanMax > allowed Maximum [8 > 7]. Enforcing Default= 4
[   19.851462] c1   1211 wlan: [1211:E :HDD] hdd_apply_cfg_ini: Reg Parameter gRrmNonOperChanMax > allowed Maximum [8 > 7]. Enforcing Default= 4
[   19.852189] c1   1211 wlan: [1211:E :HDD] hdd_apply_cfg_ini: Reg Parameter gtsf_gpio_pin > allowed Maximum [255 > 254]. Enforcing Default= 255
[   19.854509] c2   1674 wlan: [1674:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   19.857928] c1   1211 NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
[   19.860134] c1   1211 ol_download_firmware: Using 0x1234 for the remainder of init
[   19.860145] c1   1211 ol_transfer_codeswap_struct: failed to get codeswap structure
[   19.862529] c1    442 type=1400 audit(1505257755.392:56): avc: denied { search } for pid=1211 comm="Binder:645_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   19.862683] c1    442 type=1400 audit(1505257755.392:57): avc: denied { search } for pid=1211 comm="Binder:645_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   19.862770] c1    442 type=1400 audit(1505257755.392:58): avc: denied { search } for pid=1211 comm="Binder:645_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   19.886178] c0   1211 wlan: [1211:E :VOS] __ol_transfer_bin_file: transferring file: otp30.bin size 23985 bytes done!
[   19.887878] c1    442 type=1400 audit(1505257755.415:59): avc: denied { search } for pid=1211 comm="Binder:645_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   19.888068] c1    442 type=1400 audit(1505257755.415:60): avc: denied { search } for pid=1211 comm="Binder:645_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   19.888179] c1    442 type=1400 audit(1505257755.415:61): avc: denied { search } for pid=1211 comm="Binder:645_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   19.894157] c0   1211 Board extended Data download address: 0x0
[   19.900288] c1   1211 wlan: [1211:E :VOS] __ol_transfer_bin_file: transferring file: bdwlan30.b82 size 8124 bytes done!
[   19.900597] c1   1211 __ol_transfer_bin_file: no Setup file defined
[   19.900961] c1    442 type=1400 audit(1505257755.432:62): avc: denied { search } for pid=1211 comm="Binder:645_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   19.901113] c1    442 type=1400 audit(1505257755.432:63): avc: denied { search } for pid=1211 comm="Binder:645_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   19.901205] c1    442 type=1400 audit(1505257755.432:64): avc: denied { search } for pid=1211 comm="Binder:645_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   19.928047] c3    641 msm_vidc: info: Opening video instance: 0000000000000000, 0
[   19.933146] c3    641 subsys-restart: __subsystem_get(): Changing subsys fw_name to venus
[   19.938205] c0    442 type=1400 audit(1505257755.469:65): avc: denied { search } for pid=641 comm="mediacodec" name="firmware" dev="dm-0" ino=25 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   19.938464] c0    442 type=1400 audit(1505257755.469:66): avc: denied { search } for pid=641 comm="mediacodec" name="firmware" dev="dm-0" ino=25 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   19.938660] c0    442 type=1400 audit(1505257755.469:67): avc: denied { search } for pid=641 comm="mediacodec" name="firmware" dev="dm-0" ino=25 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   19.942404] c3    641 subsys-pil-tz ce0000.qcom,venus: venus: loading from 0x0000000090f00000 to 0x0000000091400000
[   19.963050] c1    442 type=1400 audit(1505257755.492:68): avc: denied { search } for pid=641 comm="mediacodec" name="firmware" dev="dm-0" ino=25 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   19.963318] c1    442 type=1400 audit(1505257755.492:69): avc: denied { search } for pid=641 comm="mediacodec" name="firmware" dev="dm-0" ino=25 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   19.963499] c1    442 type=1400 audit(1505257755.492:70): avc: denied { search } for pid=641 comm="mediacodec" name="firmware" dev="dm-0" ino=25 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   19.975891] c1    442 type=1400 audit(1505257755.505:71): avc: denied { search } for pid=641 comm="mediacodec" name="firmware" dev="dm-0" ino=25 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   19.976096] c1    442 type=1400 audit(1505257755.505:72): avc: denied { search } for pid=641 comm="mediacodec" name="firmware" dev="dm-0" ino=25 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   19.976476] c1    442 type=1400 audit(1505257755.505:73): avc: denied { search } for pid=641 comm="mediacodec" name="firmware" dev="dm-0" ino=25 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   19.992190] c1    442 type=1400 audit(1505257755.522:74): avc: denied { search } for pid=641 comm="mediacodec" name="firmware" dev="dm-0" ino=25 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   19.992771] c1    442 type=1400 audit(1505257755.522:75): avc: denied { search } for pid=641 comm="mediacodec" name="firmware" dev="dm-0" ino=25 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   19.993122] c1    442 type=1400 audit(1505257755.522:76): avc: denied { search } for pid=641 comm="mediacodec" name="firmware" dev="dm-0" ino=25 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   20.027265] c2    641 subsys-pil-tz ce0000.qcom,venus: venus: Brought out of reset
[   20.061392] c2   1631 msm_vidc: info: Closed video instance: 0000000000000000
[   20.065421] c2   1631 msm_vidc: info: Opening video instance: 0000000000000000, 0
[   20.080253] c1    788 msm_vidc: info: Closed video instance: 0000000000000000
[   20.090163] c1    641 msm_vidc: info: Opening video instance: 0000000000000000, 0
[   20.104834] c2   1705 msm_vidc: info: Closed video instance: 0000000000000000
[   20.109497] c2    788 msm_vidc: info: Opening video instance: 0000000000000000, 0
[   20.117846] c2    788 msm_vidc: info: Closed video instance: 0000000000000000
[   20.122217] c2   1631 msm_vidc: info: Opening video instance: 0000000000000000, 0
[   20.130628] c2   1705 msm_vidc: info: Closed video instance: 0000000000000000
[   20.139990] c2   1631 msm_vidc: info: Opening video instance: 0000000000000000, 1
[   20.158654] c1    641 msm_vidc: info: Closed video instance: 0000000000000000
[   20.165402] c0   1705 msm_vidc: info: Opening video instance: 0000000000000000, 1
[   20.182515] c1   1705 msm_vidc: info: Closed video instance: 0000000000000000
[   20.186859] c2    641 msm_vidc: info: Opening video instance: 0000000000000000, 1
[   20.196636] c2    641 msm_vidc: info: Closed video instance: 0000000000000000
[   20.200856] c2    641 msm_vidc: info: Opening video instance: 0000000000000000, 1
[   20.211759] c2   1631 msm_vidc: info: Closed video instance: 0000000000000000
[   20.216323] c1    641 msm_vidc: info: Opening video instance: 0000000000000000, 1
[   20.227465] c3   1631 msm_vidc: info: Closed video instance: 0000000000000000
[   20.231323] c3    788 msm_vidc: info: Opening video instance: 0000000000000000, 1
[   20.239674] c3   1631 msm_vidc: info: Closed video instance: 0000000000000000
[   20.243784] c3    641 msm_vidc: info: Opening video instance: 0000000000000000, 1
[   20.251662] c2    788 msm_vidc: info: Closed video instance: 0000000000000000
[   20.255367] c2   1705 msm_vidc: info: Opening video instance: 0000000000000000, 1
[   20.269575] c3    641 msm_vidc: info: Closed video instance: 0000000000000000
[   20.273711] c3   1705 msm_vidc: info: Opening video instance: 0000000000000000, 1
[   20.285379] c2   1631 msm_vidc: info: Closed video instance: 0000000000000000
[   20.600274] c1   1211 wlan: [1211:E :VOS] __ol_transfer_bin_file: transferring file: qwlan30.bin size 749040 bytes done!
[   20.600727] c1   1211 +HTCCreate ..  HIF :ffffffc04a6f2800 
[   20.600782] c1   1211 -HTCCreate (0xffffffc0ee447000) 
[   20.600922] c1   1211 wlan: [1211:F :WDA] WMA --> wmi_unified_attach - success
[   20.600953] c1   1211 ol_if_dfs_attach: called; ptr=ffffffc0f51ddc54, radar_info=ffffffc0709ff7c0
[   20.601507] c1   1211 wlan: [1211:E :SAP] dfs_init_radar_filters[201]: Unknown dfs domain 0 
[   20.601699] c1   1211 +HWT
[   20.601719] c1   1211 pipe_num:0 pipe_info:0xffffffc04a6f28a0
[   20.601806] c1   1211 pipe_num:3 pipe_info:0xffffffc04a6f2a08
[   20.601832] c1   1211 pipe_num:4 pipe_info:0xffffffc04a6f2a80
[   20.602001] c1   1211 pipe_num:5 pipe_info:0xffffffc04a6f2af8
[   20.613610] c3   1211 Target Ready! : transmit resources : 2 size:1792, MaxMsgsPerHTCBundle = 1
[   20.613632] c3   1211 HTC Service Index : 1 TX : 0x100 : alloc:2 
[   20.613641] c3   1211 HTC Service:0x0001, ULpipe:0 DLpipe:1 id:0 Ready
[   20.613645] c3   1211 -HWT
[   20.613878] c3   1211 is_full_reorder_offloaded? 1
[   20.613885] c3   1211 HTC Service TX : 0x300 : allocation is zero! 
[   20.613948] c3   1674 wlan: [1674:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   20.614060] c3   1211 HTC Service:0x0300, ULpipe:4 DLpipe:1 id:1 Ready
[   20.614065] c3   1211 HTC Service:0x0300 ep:1 TX flow control disabled
[   20.617954] c3   1211 HTT: full reorder offload enabled
[   20.619114] c3   1211 HTC Service:0x0100, ULpipe:3 DLpipe:2 id:2 Ready
[   20.619124] c3   1211 wlan: [1211:F :WDA] WMA --> wmi_unified_connect_htc_service - success
[   20.619164] c2   1677 wlan: [1677:F :WDA] McThread: WNI_CFG_DNLD_REQ
[   20.619201] c3   1211 HTC using TX credit flow control
[   20.619603] c0     42 __wmi_control_rx: WMI UNIFIED SERVICE READY event
[   20.619685] c0     42 wlan: [42:F :WDA] WMA <-- WMI_SERVICE_READY_EVENTID
[   20.619753] c0     42 wlan: [42:E :WDA] wma_rx_service_ready_event: Firmware build version : 4321000b
[   20.619797] c0     42 wlan: [42:E :WDA] wma_rx_service_ready_event: Board version: 0.1031102
[   20.619899] c0     42 wlan: [42:F :WDA] WMA --> WMI_INIT_CMDID
[   20.635964] c0     42 __wmi_control_rx:  WMI UNIFIED READY event
[   20.636052] c0     42 wlan: [42:F :WDA] WMA <-- WMI_READY_EVENTID
[   20.636212] c2   1674 wlan: [1674:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   20.636979] c2   1674 wlan: [1674:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   20.641606] c3   1211 wlan: [1211:E :SME] csr_init_chan_list: 333: init time country code US
[   20.641651] c3    250 cfg80211: Calling CRDA for country: US
[   20.641740] c0   1677 wlan: [1677:E :WDA] Invalid wda_cli_set pdev command/Not yet implemented 0x4d
[   20.641808] c3    250 wlan: [250:F :HDD] pAdapter is null !!
[   20.641866] c3    250 wlan: [250:E :WDA] regdmn_set_dfs_region: dfs_region: 1
[   20.641879] c3    250 cfg80211: Regulatory domain changed to country: US
[   20.641885] c3    250 cfg80211:  DFS Master region: FCC
[   20.641891] c3    250 cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   20.641901] c3    250 cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[   20.641907] c3    250 cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2400 mBm), (N/A)
[   20.641914] c3    250 cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2400 mBm), (0 s)
[   20.641920] c3    250 cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2400 mBm), (0 s)
[   20.641926] c3    250 cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[   20.641931] c3    250 cfg80211:   (5842000 KHz - 5863000 KHz @ 5000 KHz), (N/A, 3000 mBm), (N/A)
[   20.641937] c3    250 cfg80211:   (5850000 KHz - 5870000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A)
[   20.641942] c3    250 cfg80211:   (5860000 KHz - 5880000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A)
[   20.641948] c3    250 cfg80211:   (5865000 KHz - 5885000 KHz @ 20000 KHz), (N/A, 3000 mBm), (N/A)
[   20.641954] c3    250 cfg80211:   (5870000 KHz - 5890000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A)
[   20.641959] c3    250 cfg80211:   (5880000 KHz - 5900000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A)
[   20.641962] c0   1674 wlan: [1674:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   20.641972] c3    250 cfg80211:   (5890000 KHz - 5910000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A)
[   20.641978] c3    250 cfg80211:   (5895000 KHz - 5915000 KHz @ 20000 KHz), (N/A, 3000 mBm), (N/A)
[   20.641983] c3    250 cfg80211:   (5900000 KHz - 5920000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A)
[   20.641988] c3    250 cfg80211:   (5910000 KHz - 5930000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A)
[   20.641994] c3    250 cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[   20.642812] c3   1211 wlan: [1211:E :WDA] MCC TX Pause Event Handler register
[   20.642842] c3   1211 wlan: [1211:E :WDA] Target does not support cesium network
[   20.643147] c3   1211 Pkt log is enabled
[   20.643193] c3   1211 wlan: [1211:E :SME] sme_AddChAvoidCallback: Plug in CH AVOID CB
[   20.644504] c0   1674 wlan: [1674:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   20.644839] c0   1677 wlan: [1677:E :WDA] wma_unified_vdev_create_send: ID = 0 VAP Addr = ac:37:43:4c:69:f6
[   20.645080] c0   1674 wlan: [1674:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   20.645364] c0   1674 wlan: [1674:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   20.645700] c0     42 wlan: [42:E :HDD] wlan_hdd_validate_context: 1162: wlan_hdd_roc_request_dequeue+0x28/0x1e0 Unloading/Loading in Progress. Ignore!!!
[   20.648945] c0    417 target uses HTT version 3.28; host uses 3.27
[   20.648971] c0    417 *** Warning: host/target HTT versions are different, though compatible!
[   20.654845] c0   1674 wlan: [1674:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   20.655018] c0   1677 wlan: [1677:E :WDA] Invalid wda_cli_set pdev command/Not yet implemented 0x34
[   20.656019] c3   1674 wlan: [1674:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   20.656089] c0   1677 wlan: [1677:E :WDA] wma_unified_vdev_create_send: ID = 1 VAP Addr = ae:37:43:4c:69:f6
[   20.656172] c0   1677 wlan: [1677:F :WDA] Creating self peer ae:37:43:4c:69:f6, vdev_id 1
[   20.656214] c0   1677 wlan: [1677:E :WDA] wma_create_peer: Created peer with peer_addr ae:37:43:4c:69:f6 vdev_id 1, peer_count - 1
[   20.656350] c2   1674 wlan: [1674:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   20.656882] c0     42 wlan: [42:E :HDD] wlan_hdd_validate_context: 1162: wlan_hdd_roc_request_dequeue+0x28/0x1e0 Unloading/Loading in Progress. Ignore!!!
[   20.667519] c0   1677 wlan: [1677:E :WDA] Invalid wda_cli_set pdev command/Not yet implemented 0x34
[   20.667805] c2   1674 wlan: [1674:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   20.668476] c2   1674 wlan: [1674:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   20.668906] c0   1211 Host SW:4.4.25.029, FW:4.3.2.11, HW:QCA6174_REV3_2
[   20.669475] c0   1674 wlan: [1674:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   20.669670] c0   1211 ol_pktlog_init: pktlogmod_init successfull
[   20.669808] c0   1211 wlan: driver loaded in 963425
[   20.716373] c2      1 init: Starting service 'p2p_supplicant'...
[   20.751064] c1   1677 wlan: [1677:F :WDA] P2P Device: removing self peer ae:37:43:4c:69:f6
[   20.751082] c1   1677 TXRX: ol_txrx_peer_detach:peer ffffffc064d32800 (ae:37:43:4c:69:f6)
[   20.751093] c1   1677 wlan: [1677:E :WDA] wma_remove_peer: Removed peer with addr ae:37:43:4c:69:f6 vdevid 1 peer_count 0
[   20.751719] c0   1787 TXRX: ol_rx_peer_unmap_handler: Remove the ID 63 reference to peer ffffffc064d32800
[   20.751749] c0   1787 TXRX: ol_rx_peer_unmap_handler: Remove the ID 47 reference to peer ffffffc064d32800
[   20.751756] c0   1787 TXRX: Deleting peer ffffffc064d32800 (ae:37:43:4c:69:f6)
[   20.751999] c1   1677 wlan: [1677:E :WDA] wma_unified_vdev_create_send: ID = 1 VAP Addr = ae:37:43:4c:69:f6
[   20.752047] c1   1677 wlan: [1677:F :WDA] Creating self peer ae:37:43:4c:69:f6, vdev_id 1
[   20.752071] c1   1677 wlan: [1677:E :WDA] wma_create_peer: Created peer with peer_addr ae:37:43:4c:69:f6 vdev_id 1, peer_count - 1
[   20.757390] c1   1787 IPv6: ADDRCONF(NETDEV_UP): p2p0: link is not ready
[   21.029013] c2    442 type=1400 audit(1505257756.559:77): avc: denied { read write } for pid=1837 comm="system_server" name="diag" dev="tmpfs" ino=15154 scontext=u:r:system_server:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0
[   21.674694] c1    563 tfa98xx_spk_event(): event 2
[   21.749199] c2      1 init: avc:  granted  { set } for property=net.lte.ims.data.enabled pid=1854 uid=1001 gid=1001 scontext=u:r:radio:s0 tcontext=u:object_r:net_radio_prop:s0 tclass=property_service
[   24.369139] c0      1 init: Service 'bootanim' (pid 508) exited with status 0
[   24.540455] c0      1 init: write_file: Unable to open '/proc/sys/kernel/sched_boost': No such file or directory
[   24.544788] c0      1 init: Starting service 'exec 11 (/system/bin/bootstat)'...
[   24.584246] c2      1 init: Service 'exec 11 (/system/bin/bootstat)' (pid 2006) exited with status 0
[   24.584579] c2      1 init: Starting service 'exec 12 (/system/bin/bootstat)'...
[   24.599937] c2      1 init: Service 'exec 12 (/system/bin/bootstat)' (pid 2009) exited with status 0
[   24.600579] c2      1 init: Starting service 'exec 13 (/system/bin/bootstat)'...
[   24.615831] c2      1 init: Service 'exec 13 (/system/bin/bootstat)' (pid 2016) exited with status 0
[   24.616047] c2      1 init: Starting service 'exec 14 (/system/bin/bootstat)'...
[   24.627082] c2      1 init: Service 'exec 14 (/system/bin/bootstat)' (pid 2017) exited with status 0
[   25.263156] c2     24 get_ice_device_from_storage_type: found ice device ffffffc03202a000
[   25.264429] c2     24 get_ice_device_from_storage_type: found ice device ffffffc03202a000
[   26.104320] c2   2300 [NFC] pn551_dev_open : major=10, minor=100
[   26.104349] c2   2300 [NFC] pn551_dev_ioctl power off (delay50)
[   26.104364] c2   2300 [NFC] pn551_Disable: gpio=12 set_value=0
[   26.104373] c2   2300 [NFC] pn551_Disable: [NFC] gpio=12 check ven_gpio value=0
[   26.156733] c2   2300 [NFC] pn551_dev_ioctl pn551_Disable, set is_debug = 0, s_wdcmd_cnt = 0
[   26.166836] c2   2300 [NFC] pn551_dev_ioctl power on (delay50)
[   26.166860] c2   2300 [NFC] pn551_Enable: gpio=12 set_value=1
[   26.166870] c2   2300 [NFC] pn551_Enable: [NFC] gpio=12 check ven_gpio value=1
[   26.220068] c2   2300 [NFC] pn551_dev_ioctl pn551_Enable, set is_debug = 1, s_wdcmd_cnt : 0
[   26.225072] c2   2318 [NFC] pn551_dev_write: start count = 4
[   26.225081] c2   2318 [NFC] pn551_dev_write: writing 4 bytes
[   26.225088] c2   2318 [NFC] pn551_dev_write : [0] = 0x20
[   26.225091] c2   2318 [NFC] pn551_dev_write : [1] = 0x0
[   26.225094] c2   2318 [NFC] pn551_dev_write : [2] = 0x1
[   26.225097] c2   2318 [NFC] pn551_dev_write : [3] = 0x0
[   26.225100] c2   2318 [NFC] pn551_TxData: [addr=28 flag=0 len=4]
[   26.225103] c2   2318 [NFC] pn551_TxData: retry 0 ........
[   26.225422] c2   2318 i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0x27 (ok)
[   26.225598] c2   2317 [NFC] pn551_dev_read: start count = 3
[   26.225606] c2   2317 [NFC] pn551_dev_read: reading 3 bytes, irq_gpio = 0
[   26.225618] c2   2317 [NFC] pn551_dev_read: waiting read-event INT, because irq_gpio = 0
[   26.228252] c2   2318 [NFC] pn551_dev_write done count = 4
[   26.230509] c0   2195 [NFC] pn551_dev_irq_handler: irq=405
[   26.230521] c2   2317 [NFC] pn551_dev_read : wait_event_interruptible done
[   26.230527] c2   2317 [NFC] pn551_RxData: [addr=28 flag=1 len=3]
[   26.230532] c2   2317 [NFC] pn551_RxData: retry 0 ........
[   26.230733] c2   2317 [NFC] pn551_dev_read : [0] = 0x40
[   26.230738] c2   2317 [NFC] pn551_dev_read : [1] = 0x0
[   26.230741] c2   2317 [NFC] pn551_dev_read : [2] = 0x3
[   26.230745] c2   2317 [NFC] pn551_dev_read done count = 3
[   26.230755] c2   2317 [NFC] pn551_dev_read: start count = 3
[   26.230763] c2   2317 [NFC] pn551_dev_read: reading 3 bytes, irq_gpio = 1
[   26.230768] c2   2317 [NFC] pn551_RxData: [addr=28 flag=1 len=3]
[   26.230771] c2   2317 [NFC] pn551_RxData: retry 0 ........
[   26.230957] c2   2317 [NFC] pn551_dev_read : [0] = 0x0
[   26.230962] c2   2317 [NFC] pn551_dev_read : [1] = 0x11
[   26.230965] c2   2317 [NFC] pn551_dev_read : [2] = 0x0
[   26.230968] c2   2317 [NFC] pn551_dev_read done count = 3
[   26.231080] c2   2318 [NFC] pn551_dev_write: start count = 3
[   26.231084] c2   2318 [NFC] pn551_dev_write: writing 3 bytes
[   26.231092] c2   2318 [NFC] pn551_dev_write : [0] = 0x20
[   26.231095] c2   2318 [NFC] pn551_dev_write : [1] = 0x1
[   26.231098] c2   2318 [NFC] pn551_dev_write : [2] = 0x0
[   26.231101] c2   2318 [NFC] pn551_TxData: [addr=28 flag=0 len=3]
[   26.231105] c2   2318 [NFC] pn551_TxData: retry 0 ........
[   26.231175] c2   2317 [NFC] pn551_dev_read: start count = 3
[   26.231184] c2   2317 [NFC] pn551_dev_read: reading 3 bytes, irq_gpio = 0
[   26.231194] c2   2317 [NFC] pn551_dev_read: waiting read-event INT, because irq_gpio = 0
[   26.231280] c2   2318 [NFC] pn551_dev_write done count = 3
[   26.231542] c2   2317 [NFC] pn551_dev_read : wait_event_interruptible done
[   26.231549] c2   2317 [NFC] pn551_RxData: [addr=28 flag=1 len=3]
[   26.231552] c2   2317 [NFC] pn551_RxData: retry 0 ........
[   26.231745] c2   2317 [NFC] pn551_dev_read : [0] = 0x40
[   26.231749] c2   2317 [NFC] pn551_dev_read : [1] = 0x1
[   26.231752] c2   2317 [NFC] pn551_dev_read : [2] = 0x19
[   26.231755] c2   2317 [NFC] pn551_dev_read done count = 3
[   26.231765] c2   2317 [NFC] pn551_dev_read: start count = 25
[   26.231775] c2   2317 [NFC] pn551_dev_read: reading 25 bytes, irq_gpio = 1
[   26.231783] c2   2317 [NFC] pn551_RxData: [addr=28 flag=1 len=19]
[   26.231788] c2   2317 [NFC] pn551_RxData: retry 0 ........
[   26.232495] c2   2317 [NFC] pn551_dev_read : [0] = 0x0
[   26.232501] c2   2317 [NFC] pn551_dev_read : [1] = 0x3
[   26.232504] c2   2317 [NFC] pn551_dev_read : [2] = 0x1e
[   26.232507] c2   2317 [NFC] pn551_dev_read : [3] = 0x3
[   26.232509] c2   2317 [NFC] pn551_dev_read : [4] = 0x0
[   26.232512] c2   2317 [NFC] pn551_dev_read : [5] = 0x8
[   26.232514] c2   2317 [NFC] pn551_dev_read : [6] = 0x0
[   26.232517] c2   2317 [NFC] pn551_dev_read : [7] = 0x1
[   26.232519] c2   2317 [NFC] pn551_dev_read : [8] = 0x2
[   26.232522] c2   2317 [NFC] pn551_dev_read : [9] = 0x3
[   26.232525] c2   2317 [NFC] pn551_dev_read : [10] = 0x80
[   26.232529] c2   2317 [NFC] pn551_dev_read : [11] = 0x81
[   26.232531] c2   2317 [NFC] pn551_dev_read : [12] = 0x82
[   26.232534] c2   2317 [NFC] pn551_dev_read : [13] = 0x83
[   26.232536] c2   2317 [NFC] pn551_dev_read : [14] = 0x2
[   26.232539] c2   2317 [NFC] pn551_dev_read : [15] = 0xd0
[   26.232542] c2   2317 [NFC] pn551_dev_read : [16] = 0x2
[   26.232544] c2   2317 [NFC] pn551_dev_read : [17] = 0xff
[   26.232547] c2   2317 [NFC] pn551_dev_read : [18] = 0x2
[   26.232550] c2   2317 [NFC] pn551_dev_read : [19] = 0x0
[   26.232552] c2   2317 [NFC] pn551_dev_read : [20] = 0x4
[   26.232555] c2   2317 [NFC] pn551_dev_read : [21] = 0x98
[   26.232557] c2   2317 [NFC] pn551_dev_read : [22] = 0x10
[   26.232560] c2   2317 [NFC] pn551_dev_read : [23] = 0x5
[   26.232562] c2   2317 [NFC] pn551_dev_read : [24] = 0x2
[   26.232565] c2   2317 [NFC] pn551_dev_read done count = 25
[   26.232673] c2   2318 [NFC] pn551_dev_write: start count = 6
[   26.232677] c2   2318 [NFC] pn551_dev_write: writing 6 bytes
[   26.232684] c2   2318 [NFC] pn551_dev_write : [0] = 0x20
[   26.232687] c2   2318 [NFC] pn551_dev_write : [1] = 0x3
[   26.232689] c2   2318 [NFC] pn551_dev_write : [2] = 0x3
[   26.232692] c2   2318 [NFC] pn551_dev_write : [3] = 0x1
[   26.232694] c2   2318 [NFC] pn551_dev_write : [4] = 0xa0
[   26.232696] c2   2318 [NFC] pn551_dev_write : [5] = 0x5
[   26.232699] c2   2318 [NFC] pn551_TxData: [addr=28 flag=0 len=6]
[   26.232702] c2   2318 [NFC] pn551_TxData: retry 0 ........
[   26.232777] c2   2317 [NFC] pn551_dev_read: start count = 3
[   26.232789] c2   2317 [NFC] pn551_dev_read: reading 3 bytes, irq_gpio = 0
[   26.232798] c2   2317 [NFC] pn551_dev_read: waiting read-event INT, because irq_gpio = 0
[   26.232948] c2   2318 [NFC] pn551_dev_write done count = 6
[   26.233602] c2   2317 [NFC] pn551_dev_read : wait_event_interruptible done
[   26.233612] c2   2317 [NFC] pn551_RxData: [addr=28 flag=1 len=3]
[   26.233615] c2   2317 [NFC] pn551_RxData: retry 0 ........
[   26.233814] c2   2317 [NFC] pn551_dev_read : [0] = 0x40
[   26.233817] c2   2317 [NFC] pn551_dev_read : [1] = 0x3
[   26.233820] c2   2317 [NFC] pn551_dev_read : [2] = 0x6
[   26.233822] c2   2317 [NFC] pn551_dev_read done count = 3
[   26.233830] c2   2317 [NFC] pn551_dev_read: start count = 6
[   26.233836] c2   2317 [NFC] pn551_dev_read: reading 6 bytes, irq_gpio = 1
[   26.233841] c2   2317 [NFC] pn551_RxData: [addr=28 flag=1 len=6]
[   26.233843] c2   2317 [NFC] pn551_RxData: retry 0 ........
[   26.235198] c2   2317 [NFC] pn551_dev_read : [0] = 0x0
[   26.235204] c2   2317 [NFC] pn551_dev_read : [1] = 0x1
[   26.235207] c2   2317 [NFC] pn551_dev_read : [2] = 0xa0
[   26.235210] c2   2317 [NFC] pn551_dev_read : [3] = 0x5
[   26.235213] c2   2317 [NFC] pn551_dev_read : [4] = 0x1
[   26.235215] c2   2317 [NFC] pn551_dev_read : [5] = 0x0
[   26.235219] c2   2317 [NFC] pn551_dev_read done count = 6
[   26.235982] c2   2317 [NFC] pn551_dev_read: start count = 3
[   26.235997] c2   2317 [NFC] pn551_dev_read: reading 3 bytes, irq_gpio = 0
[   26.236010] c2   2317 [NFC] pn551_dev_read: waiting read-event INT, because irq_gpio = 0
[   26.237240] c2   2318 [NFC] pn551_dev_write: start count = 4