| // |
| // Copyright (C) 2014-2015 LunarG, Inc. |
| // |
| // All rights reserved. |
| // |
| // Redistribution and use in source and binary forms, with or without |
| // modification, are permitted provided that the following conditions |
| // are met: |
| // |
| // Redistributions of source code must retain the above copyright |
| // notice, this list of conditions and the following disclaimer. |
| // |
| // Redistributions in binary form must reproduce the above |
| // copyright notice, this list of conditions and the following |
| // disclaimer in the documentation and/or other materials provided |
| // with the distribution. |
| // |
| // Neither the name of 3Dlabs Inc. Ltd. nor the names of its |
| // contributors may be used to endorse or promote products derived |
| // from this software without specific prior written permission. |
| // |
| // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| // "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| // LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS |
| // FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE |
| // COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, |
| // INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, |
| // BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| // LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
| // CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| // LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN |
| // ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| // POSSIBILITY OF SUCH DAMAGE. |
| |
| // |
| // Disassembler for SPIR-V. |
| // |
| |
| #include <cstdlib> |
| #include <cstring> |
| #include <cassert> |
| #include <iomanip> |
| #include <stack> |
| #include <sstream> |
| #include <cstring> |
| |
| #include "disassemble.h" |
| #include "doc.h" |
| |
| namespace spv { |
| extern "C" { |
| // Include C-based headers that don't have a namespace |
| #include "GLSL.std.450.h" |
| #ifdef AMD_EXTENSIONS |
| #include "GLSL.ext.AMD.h" |
| #endif |
| #ifdef NV_EXTENSIONS |
| #include "GLSL.ext.NV.h" |
| #endif |
| } |
| } |
| const char* GlslStd450DebugNames[spv::GLSLstd450Count]; |
| |
| namespace spv { |
| |
| #ifdef AMD_EXTENSIONS |
| static const char* GLSLextAMDGetDebugNames(const char*, unsigned); |
| #endif |
| |
| #ifdef NV_EXTENSIONS |
| static const char* GLSLextNVGetDebugNames(const char*, unsigned); |
| #endif |
| |
| static void Kill(std::ostream& out, const char* message) |
| { |
| out << std::endl << "Disassembly failed: " << message << std::endl; |
| exit(1); |
| } |
| |
| // used to identify the extended instruction library imported when printing |
| enum ExtInstSet { |
| GLSL450Inst, |
| #ifdef AMD_EXTENSIONS |
| GLSLextAMDInst, |
| #endif |
| #ifdef NV_EXTENSIONS |
| GLSLextNVInst, |
| #endif |
| OpenCLExtInst, |
| }; |
| |
| // Container class for a single instance of a SPIR-V stream, with methods for disassembly. |
| class SpirvStream { |
| public: |
| SpirvStream(std::ostream& out, const std::vector<unsigned int>& stream) : out(out), stream(stream), word(0), nextNestedControl(0) { } |
| virtual ~SpirvStream() { } |
| |
| void validate(); |
| void processInstructions(); |
| |
| protected: |
| SpirvStream(const SpirvStream&); |
| SpirvStream& operator=(const SpirvStream&); |
| Op getOpCode(int id) const { return idInstruction[id] ? (Op)(stream[idInstruction[id]] & OpCodeMask) : OpNop; } |
| |
| // Output methods |
| void outputIndent(); |
| void formatId(Id id, std::stringstream&); |
| void outputResultId(Id id); |
| void outputTypeId(Id id); |
| void outputId(Id id); |
| void outputMask(OperandClass operandClass, unsigned mask); |
| void disassembleImmediates(int numOperands); |
| void disassembleIds(int numOperands); |
| int disassembleString(); |
| void disassembleInstruction(Id resultId, Id typeId, Op opCode, int numOperands); |
| |
| // Data |
| std::ostream& out; // where to write the disassembly |
| const std::vector<unsigned int>& stream; // the actual word stream |
| int size; // the size of the word stream |
| int word; // the next word of the stream to read |
| |
| // map each <id> to the instruction that created it |
| Id bound; |
| std::vector<unsigned int> idInstruction; // the word offset into the stream where the instruction for result [id] starts; 0 if not yet seen (forward reference or function parameter) |
| |
| std::vector<std::string> idDescriptor; // the best text string known for explaining the <id> |
| |
| // schema |
| unsigned int schema; |
| |
| // stack of structured-merge points |
| std::stack<Id> nestedControl; |
| Id nextNestedControl; // need a slight delay for when we are nested |
| }; |
| |
| void SpirvStream::validate() |
| { |
| size = (int)stream.size(); |
| if (size < 4) |
| Kill(out, "stream is too short"); |
| |
| // Magic number |
| if (stream[word++] != MagicNumber) { |
| out << "Bad magic number"; |
| return; |
| } |
| |
| // Version |
| out << "// Module Version " << std::hex << stream[word++] << std::endl; |
| |
| // Generator's magic number |
| out << "// Generated by (magic number): " << std::hex << stream[word++] << std::dec << std::endl; |
| |
| // Result <id> bound |
| bound = stream[word++]; |
| idInstruction.resize(bound); |
| idDescriptor.resize(bound); |
| out << "// Id's are bound by " << bound << std::endl; |
| out << std::endl; |
| |
| // Reserved schema, must be 0 for now |
| schema = stream[word++]; |
| if (schema != 0) |
| Kill(out, "bad schema, must be 0"); |
| } |
| |
| // Loop over all the instructions, in order, processing each. |
| // Boiler plate for each is handled here directly, the rest is dispatched. |
| void SpirvStream::processInstructions() |
| { |
| // Instructions |
| while (word < size) { |
| int instructionStart = word; |
| |
| // Instruction wordCount and opcode |
| unsigned int firstWord = stream[word]; |
| unsigned wordCount = firstWord >> WordCountShift; |
| Op opCode = (Op)(firstWord & OpCodeMask); |
| int nextInst = word + wordCount; |
| ++word; |
| |
| // Presence of full instruction |
| if (nextInst > size) |
| Kill(out, "stream instruction terminated too early"); |
| |
| // Base for computing number of operands; will be updated as more is learned |
| unsigned numOperands = wordCount - 1; |
| |
| // Type <id> |
| Id typeId = 0; |
| if (InstructionDesc[opCode].hasType()) { |
| typeId = stream[word++]; |
| --numOperands; |
| } |
| |
| // Result <id> |
| Id resultId = 0; |
| if (InstructionDesc[opCode].hasResult()) { |
| resultId = stream[word++]; |
| --numOperands; |
| |
| // save instruction for future reference |
| idInstruction[resultId] = instructionStart; |
| } |
| |
| outputResultId(resultId); |
| outputTypeId(typeId); |
| outputIndent(); |
| |
| // Hand off the Op and all its operands |
| disassembleInstruction(resultId, typeId, opCode, numOperands); |
| if (word != nextInst) { |
| out << " ERROR, incorrect number of operands consumed. At " << word << " instead of " << nextInst << " instruction start was " << instructionStart; |
| word = nextInst; |
| } |
| out << std::endl; |
| } |
| } |
| |
| void SpirvStream::outputIndent() |
| { |
| for (int i = 0; i < (int)nestedControl.size(); ++i) |
| out << " "; |
| } |
| |
| void SpirvStream::formatId(Id id, std::stringstream& idStream) |
| { |
| if (id != 0) { |
| // On instructions with no IDs, this is called with "0", which does not |
| // have to be within ID bounds on null shaders. |
| if (id >= bound) |
| Kill(out, "Bad <id>"); |
| |
| idStream << id; |
| if (idDescriptor[id].size() > 0) |
| idStream << "(" << idDescriptor[id] << ")"; |
| } |
| } |
| |
| void SpirvStream::outputResultId(Id id) |
| { |
| const int width = 16; |
| std::stringstream idStream; |
| formatId(id, idStream); |
| out << std::setw(width) << std::right << idStream.str(); |
| if (id != 0) |
| out << ":"; |
| else |
| out << " "; |
| |
| if (nestedControl.size() && id == nestedControl.top()) |
| nestedControl.pop(); |
| } |
| |
| void SpirvStream::outputTypeId(Id id) |
| { |
| const int width = 12; |
| std::stringstream idStream; |
| formatId(id, idStream); |
| out << std::setw(width) << std::right << idStream.str() << " "; |
| } |
| |
| void SpirvStream::outputId(Id id) |
| { |
| if (id >= bound) |
| Kill(out, "Bad <id>"); |
| |
| out << id; |
| if (idDescriptor[id].size() > 0) |
| out << "(" << idDescriptor[id] << ")"; |
| } |
| |
| void SpirvStream::outputMask(OperandClass operandClass, unsigned mask) |
| { |
| if (mask == 0) |
| out << "None"; |
| else { |
| for (int m = 0; m < OperandClassParams[operandClass].ceiling; ++m) { |
| if (mask & (1 << m)) |
| out << OperandClassParams[operandClass].getName(m) << " "; |
| } |
| } |
| } |
| |
| void SpirvStream::disassembleImmediates(int numOperands) |
| { |
| for (int i = 0; i < numOperands; ++i) { |
| out << stream[word++]; |
| if (i < numOperands - 1) |
| out << " "; |
| } |
| } |
| |
| void SpirvStream::disassembleIds(int numOperands) |
| { |
| for (int i = 0; i < numOperands; ++i) { |
| outputId(stream[word++]); |
| if (i < numOperands - 1) |
| out << " "; |
| } |
| } |
| |
| // return the number of operands consumed by the string |
| int SpirvStream::disassembleString() |
| { |
| int startWord = word; |
| |
| out << " \""; |
| |
| const char* wordString; |
| bool done = false; |
| do { |
| unsigned int content = stream[word]; |
| wordString = (const char*)&content; |
| for (int charCount = 0; charCount < 4; ++charCount) { |
| if (*wordString == 0) { |
| done = true; |
| break; |
| } |
| out << *(wordString++); |
| } |
| ++word; |
| } while (! done); |
| |
| out << "\""; |
| |
| return word - startWord; |
| } |
| |
| void SpirvStream::disassembleInstruction(Id resultId, Id /*typeId*/, Op opCode, int numOperands) |
| { |
| // Process the opcode |
| |
| out << (OpcodeString(opCode) + 2); // leave out the "Op" |
| |
| if (opCode == OpLoopMerge || opCode == OpSelectionMerge) |
| nextNestedControl = stream[word]; |
| else if (opCode == OpBranchConditional || opCode == OpSwitch) { |
| if (nextNestedControl) { |
| nestedControl.push(nextNestedControl); |
| nextNestedControl = 0; |
| } |
| } else if (opCode == OpExtInstImport) { |
| idDescriptor[resultId] = (const char*)(&stream[word]); |
| } |
| else { |
| if (resultId != 0 && idDescriptor[resultId].size() == 0) { |
| switch (opCode) { |
| case OpTypeInt: |
| idDescriptor[resultId] = "int"; |
| break; |
| case OpTypeFloat: |
| idDescriptor[resultId] = "float"; |
| break; |
| case OpTypeBool: |
| idDescriptor[resultId] = "bool"; |
| break; |
| case OpTypeStruct: |
| idDescriptor[resultId] = "struct"; |
| break; |
| case OpTypePointer: |
| idDescriptor[resultId] = "ptr"; |
| break; |
| case OpTypeVector: |
| if (idDescriptor[stream[word]].size() > 0) |
| idDescriptor[resultId].append(idDescriptor[stream[word]].begin(), idDescriptor[stream[word]].begin() + 1); |
| idDescriptor[resultId].append("vec"); |
| switch (stream[word + 1]) { |
| case 2: idDescriptor[resultId].append("2"); break; |
| case 3: idDescriptor[resultId].append("3"); break; |
| case 4: idDescriptor[resultId].append("4"); break; |
| case 8: idDescriptor[resultId].append("8"); break; |
| case 16: idDescriptor[resultId].append("16"); break; |
| case 32: idDescriptor[resultId].append("32"); break; |
| default: break; |
| } |
| break; |
| default: |
| break; |
| } |
| } |
| } |
| |
| // Process the operands. Note, a new context-dependent set could be |
| // swapped in mid-traversal. |
| |
| // Handle images specially, so can put out helpful strings. |
| if (opCode == OpTypeImage) { |
| out << " "; |
| disassembleIds(1); |
| out << " " << DimensionString((Dim)stream[word++]); |
| out << (stream[word++] != 0 ? " depth" : ""); |
| out << (stream[word++] != 0 ? " array" : ""); |
| out << (stream[word++] != 0 ? " multi-sampled" : ""); |
| switch (stream[word++]) { |
| case 0: out << " runtime"; break; |
| case 1: out << " sampled"; break; |
| case 2: out << " nonsampled"; break; |
| } |
| out << " format:" << ImageFormatString((ImageFormat)stream[word++]); |
| |
| if (numOperands == 8) { |
| out << " " << AccessQualifierString(stream[word++]); |
| } |
| return; |
| } |
| |
| // Handle all the parameterized operands |
| for (int op = 0; op < InstructionDesc[opCode].operands.getNum() && numOperands > 0; ++op) { |
| out << " "; |
| OperandClass operandClass = InstructionDesc[opCode].operands.getClass(op); |
| switch (operandClass) { |
| case OperandId: |
| case OperandScope: |
| case OperandMemorySemantics: |
| disassembleIds(1); |
| --numOperands; |
| // Get names for printing "(XXX)" for readability, *after* this id |
| if (opCode == OpName) |
| idDescriptor[stream[word - 1]] = (const char*)(&stream[word]); |
| break; |
| case OperandVariableIds: |
| disassembleIds(numOperands); |
| return; |
| case OperandImageOperands: |
| outputMask(OperandImageOperands, stream[word++]); |
| --numOperands; |
| disassembleIds(numOperands); |
| return; |
| case OperandOptionalLiteral: |
| case OperandVariableLiterals: |
| if ((opCode == OpDecorate && stream[word - 1] == DecorationBuiltIn) || |
| (opCode == OpMemberDecorate && stream[word - 1] == DecorationBuiltIn)) { |
| out << BuiltInString(stream[word++]); |
| --numOperands; |
| ++op; |
| } |
| disassembleImmediates(numOperands); |
| return; |
| case OperandVariableIdLiteral: |
| while (numOperands > 0) { |
| out << std::endl; |
| outputResultId(0); |
| outputTypeId(0); |
| outputIndent(); |
| out << " Type "; |
| disassembleIds(1); |
| out << ", member "; |
| disassembleImmediates(1); |
| numOperands -= 2; |
| } |
| return; |
| case OperandVariableLiteralId: |
| while (numOperands > 0) { |
| out << std::endl; |
| outputResultId(0); |
| outputTypeId(0); |
| outputIndent(); |
| out << " case "; |
| disassembleImmediates(1); |
| out << ": "; |
| disassembleIds(1); |
| numOperands -= 2; |
| } |
| return; |
| case OperandLiteralNumber: |
| disassembleImmediates(1); |
| --numOperands; |
| if (opCode == OpExtInst) { |
| ExtInstSet extInstSet = GLSL450Inst; |
| const char* name = idDescriptor[stream[word - 2]].c_str(); |
| if (0 == memcmp("OpenCL", name, 6)) { |
| extInstSet = OpenCLExtInst; |
| #ifdef AMD_EXTENSIONS |
| } else if (strcmp(spv::E_SPV_AMD_shader_ballot, name) == 0 || |
| strcmp(spv::E_SPV_AMD_shader_trinary_minmax, name) == 0 || |
| strcmp(spv::E_SPV_AMD_shader_explicit_vertex_parameter, name) == 0 || |
| strcmp(spv::E_SPV_AMD_gcn_shader, name) == 0) { |
| extInstSet = GLSLextAMDInst; |
| #endif |
| #ifdef NV_EXTENSIONS |
| }else if (strcmp(spv::E_SPV_NV_sample_mask_override_coverage, name) == 0 || |
| strcmp(spv::E_SPV_NV_geometry_shader_passthrough, name) == 0 || |
| strcmp(spv::E_SPV_NV_viewport_array2, name) == 0 || |
| strcmp(spv::E_SPV_NVX_multiview_per_view_attributes, name) == 0) { |
| extInstSet = GLSLextNVInst; |
| #endif |
| } |
| unsigned entrypoint = stream[word - 1]; |
| if (extInstSet == GLSL450Inst) { |
| if (entrypoint < GLSLstd450Count) { |
| out << "(" << GlslStd450DebugNames[entrypoint] << ")"; |
| } |
| #ifdef AMD_EXTENSIONS |
| } else if (extInstSet == GLSLextAMDInst) { |
| out << "(" << GLSLextAMDGetDebugNames(name, entrypoint) << ")"; |
| #endif |
| #ifdef NV_EXTENSIONS |
| } |
| else if (extInstSet == GLSLextNVInst) { |
| out << "(" << GLSLextNVGetDebugNames(name, entrypoint) << ")"; |
| #endif |
| } |
| } |
| break; |
| case OperandOptionalLiteralString: |
| case OperandLiteralString: |
| numOperands -= disassembleString(); |
| break; |
| default: |
| assert(operandClass >= OperandSource && operandClass < OperandOpcode); |
| |
| if (OperandClassParams[operandClass].bitmask) |
| outputMask(operandClass, stream[word++]); |
| else |
| out << OperandClassParams[operandClass].getName(stream[word++]); |
| --numOperands; |
| |
| break; |
| } |
| } |
| |
| return; |
| } |
| |
| static void GLSLstd450GetDebugNames(const char** names) |
| { |
| for (int i = 0; i < GLSLstd450Count; ++i) |
| names[i] = "Unknown"; |
| |
| names[GLSLstd450Round] = "Round"; |
| names[GLSLstd450RoundEven] = "RoundEven"; |
| names[GLSLstd450Trunc] = "Trunc"; |
| names[GLSLstd450FAbs] = "FAbs"; |
| names[GLSLstd450SAbs] = "SAbs"; |
| names[GLSLstd450FSign] = "FSign"; |
| names[GLSLstd450SSign] = "SSign"; |
| names[GLSLstd450Floor] = "Floor"; |
| names[GLSLstd450Ceil] = "Ceil"; |
| names[GLSLstd450Fract] = "Fract"; |
| names[GLSLstd450Radians] = "Radians"; |
| names[GLSLstd450Degrees] = "Degrees"; |
| names[GLSLstd450Sin] = "Sin"; |
| names[GLSLstd450Cos] = "Cos"; |
| names[GLSLstd450Tan] = "Tan"; |
| names[GLSLstd450Asin] = "Asin"; |
| names[GLSLstd450Acos] = "Acos"; |
| names[GLSLstd450Atan] = "Atan"; |
| names[GLSLstd450Sinh] = "Sinh"; |
| names[GLSLstd450Cosh] = "Cosh"; |
| names[GLSLstd450Tanh] = "Tanh"; |
| names[GLSLstd450Asinh] = "Asinh"; |
| names[GLSLstd450Acosh] = "Acosh"; |
| names[GLSLstd450Atanh] = "Atanh"; |
| names[GLSLstd450Atan2] = "Atan2"; |
| names[GLSLstd450Pow] = "Pow"; |
| names[GLSLstd450Exp] = "Exp"; |
| names[GLSLstd450Log] = "Log"; |
| names[GLSLstd450Exp2] = "Exp2"; |
| names[GLSLstd450Log2] = "Log2"; |
| names[GLSLstd450Sqrt] = "Sqrt"; |
| names[GLSLstd450InverseSqrt] = "InverseSqrt"; |
| names[GLSLstd450Determinant] = "Determinant"; |
| names[GLSLstd450MatrixInverse] = "MatrixInverse"; |
| names[GLSLstd450Modf] = "Modf"; |
| names[GLSLstd450ModfStruct] = "ModfStruct"; |
| names[GLSLstd450FMin] = "FMin"; |
| names[GLSLstd450SMin] = "SMin"; |
| names[GLSLstd450UMin] = "UMin"; |
| names[GLSLstd450FMax] = "FMax"; |
| names[GLSLstd450SMax] = "SMax"; |
| names[GLSLstd450UMax] = "UMax"; |
| names[GLSLstd450FClamp] = "FClamp"; |
| names[GLSLstd450SClamp] = "SClamp"; |
| names[GLSLstd450UClamp] = "UClamp"; |
| names[GLSLstd450FMix] = "FMix"; |
| names[GLSLstd450Step] = "Step"; |
| names[GLSLstd450SmoothStep] = "SmoothStep"; |
| names[GLSLstd450Fma] = "Fma"; |
| names[GLSLstd450Frexp] = "Frexp"; |
| names[GLSLstd450FrexpStruct] = "FrexpStruct"; |
| names[GLSLstd450Ldexp] = "Ldexp"; |
| names[GLSLstd450PackSnorm4x8] = "PackSnorm4x8"; |
| names[GLSLstd450PackUnorm4x8] = "PackUnorm4x8"; |
| names[GLSLstd450PackSnorm2x16] = "PackSnorm2x16"; |
| names[GLSLstd450PackUnorm2x16] = "PackUnorm2x16"; |
| names[GLSLstd450PackHalf2x16] = "PackHalf2x16"; |
| names[GLSLstd450PackDouble2x32] = "PackDouble2x32"; |
| names[GLSLstd450UnpackSnorm2x16] = "UnpackSnorm2x16"; |
| names[GLSLstd450UnpackUnorm2x16] = "UnpackUnorm2x16"; |
| names[GLSLstd450UnpackHalf2x16] = "UnpackHalf2x16"; |
| names[GLSLstd450UnpackSnorm4x8] = "UnpackSnorm4x8"; |
| names[GLSLstd450UnpackUnorm4x8] = "UnpackUnorm4x8"; |
| names[GLSLstd450UnpackDouble2x32] = "UnpackDouble2x32"; |
| names[GLSLstd450Length] = "Length"; |
| names[GLSLstd450Distance] = "Distance"; |
| names[GLSLstd450Cross] = "Cross"; |
| names[GLSLstd450Normalize] = "Normalize"; |
| names[GLSLstd450FaceForward] = "FaceForward"; |
| names[GLSLstd450Reflect] = "Reflect"; |
| names[GLSLstd450Refract] = "Refract"; |
| names[GLSLstd450FindILsb] = "FindILsb"; |
| names[GLSLstd450FindSMsb] = "FindSMsb"; |
| names[GLSLstd450FindUMsb] = "FindUMsb"; |
| names[GLSLstd450InterpolateAtCentroid] = "InterpolateAtCentroid"; |
| names[GLSLstd450InterpolateAtSample] = "InterpolateAtSample"; |
| names[GLSLstd450InterpolateAtOffset] = "InterpolateAtOffset"; |
| } |
| |
| #ifdef AMD_EXTENSIONS |
| static const char* GLSLextAMDGetDebugNames(const char* name, unsigned entrypoint) |
| { |
| if (strcmp(name, spv::E_SPV_AMD_shader_ballot) == 0) { |
| switch (entrypoint) { |
| case SwizzleInvocationsAMD: return "SwizzleInvocationsAMD"; |
| case SwizzleInvocationsMaskedAMD: return "SwizzleInvocationsMaskedAMD"; |
| case WriteInvocationAMD: return "WriteInvocationAMD"; |
| case MbcntAMD: return "MbcntAMD"; |
| default: return "Bad"; |
| } |
| } else if (strcmp(name, spv::E_SPV_AMD_shader_trinary_minmax) == 0) { |
| switch (entrypoint) { |
| case FMin3AMD: return "FMin3AMD"; |
| case UMin3AMD: return "UMin3AMD"; |
| case SMin3AMD: return "SMin3AMD"; |
| case FMax3AMD: return "FMax3AMD"; |
| case UMax3AMD: return "UMax3AMD"; |
| case SMax3AMD: return "SMax3AMD"; |
| case FMid3AMD: return "FMid3AMD"; |
| case UMid3AMD: return "UMid3AMD"; |
| case SMid3AMD: return "SMid3AMD"; |
| default: return "Bad"; |
| } |
| } else if (strcmp(name, spv::E_SPV_AMD_shader_explicit_vertex_parameter) == 0) { |
| switch (entrypoint) { |
| case InterpolateAtVertexAMD: return "InterpolateAtVertexAMD"; |
| default: return "Bad"; |
| } |
| } |
| else if (strcmp(name, spv::E_SPV_AMD_gcn_shader) == 0) { |
| switch (entrypoint) { |
| case CubeFaceIndexAMD: return "CubeFaceIndexAMD"; |
| case CubeFaceCoordAMD: return "CubeFaceCoordAMD"; |
| case TimeAMD: return "TimeAMD"; |
| default: |
| break; |
| } |
| } |
| |
| return "Bad"; |
| } |
| #endif |
| |
| |
| #ifdef NV_EXTENSIONS |
| static const char* GLSLextNVGetDebugNames(const char* name, unsigned entrypoint) |
| { |
| if (strcmp(name, spv::E_SPV_NV_sample_mask_override_coverage) == 0 || |
| strcmp(name, spv::E_SPV_NV_geometry_shader_passthrough) == 0 || |
| strcmp(name, spv::E_ARB_shader_viewport_layer_array) == 0 || |
| strcmp(name, spv::E_SPV_NV_viewport_array2) == 0 || |
| strcmp(spv::E_SPV_NVX_multiview_per_view_attributes, name) == 0) { |
| switch (entrypoint) { |
| case DecorationOverrideCoverageNV: return "OverrideCoverageNV"; |
| case DecorationPassthroughNV: return "PassthroughNV"; |
| case CapabilityGeometryShaderPassthroughNV: return "GeometryShaderPassthroughNV"; |
| case DecorationViewportRelativeNV: return "ViewportRelativeNV"; |
| case BuiltInViewportMaskNV: return "ViewportMaskNV"; |
| case CapabilityShaderViewportMaskNV: return "ShaderViewportMaskNV"; |
| case DecorationSecondaryViewportRelativeNV: return "SecondaryViewportRelativeNV"; |
| case BuiltInSecondaryPositionNV: return "SecondaryPositionNV"; |
| case BuiltInSecondaryViewportMaskNV: return "SecondaryViewportMaskNV"; |
| case CapabilityShaderStereoViewNV: return "ShaderStereoViewNV"; |
| case BuiltInPositionPerViewNV: return "PositionPerViewNV"; |
| case BuiltInViewportMaskPerViewNV: return "ViewportMaskPerViewNV"; |
| case CapabilityPerViewAttributesNV: return "PerViewAttributesNV"; |
| default: return "Bad"; |
| } |
| } |
| return "Bad"; |
| } |
| #endif |
| |
| void Disassemble(std::ostream& out, const std::vector<unsigned int>& stream) |
| { |
| SpirvStream SpirvStream(out, stream); |
| spv::Parameterize(); |
| GLSLstd450GetDebugNames(GlslStd450DebugNames); |
| SpirvStream.validate(); |
| SpirvStream.processInstructions(); |
| } |
| |
| }; // end namespace spv |