Test/runtests - platform/external/deqp-deps/glslang - Gitiles

 #!/usr/bin/env bash

 TARGETDIR=localResults
 BASEDIR=baseResults
 EXE=../build/install/bin/glslangValidator
 REMAPEXE=../build/install/bin/spirv-remap
 HASERROR=0
 mkdir -p localResults

 if [ -a localtestlist ]
   then
     while read t; do
         echo Running $t...
         b=`basename $t`
         $EXE -i -l $t > $TARGETDIR/$b.out
         diff -b $BASEDIR/$b.out $TARGETDIR/$b.out || HASERROR=1
     done < localtestlist
 fi

 rm -f comp.spv frag.spv geom.spv tesc.spv tese.spv vert.spv

 #
 # special tests
 #

 $EXE badMacroArgs.frag > $TARGETDIR/badMacroArgs.frag.out
 diff -b $BASEDIR/badMacroArgs.frag.out $TARGETDIR/badMacroArgs.frag.out || HASERROR=1

 #
 # reflection tests
 #
 echo Running reflection...
 $EXE -l -q -C reflection.vert > $TARGETDIR/reflection.vert.out
 diff -b $BASEDIR/reflection.vert.out $TARGETDIR/reflection.vert.out || HASERROR=1
 $EXE -D -e flizv -l -q -C -V -Od hlsl.reflection.vert > $TARGETDIR/hlsl.reflection.vert.out
 diff -b $BASEDIR/hlsl.reflection.vert.out $TARGETDIR/hlsl.reflection.vert.out || HASERROR=1
 $EXE -D -e main -l -q -C -V -Od hlsl.reflection.binding.frag > $TARGETDIR/hlsl.reflection.binding.frag.out
 diff -b $BASEDIR/hlsl.reflection.binding.frag.out $TARGETDIR/hlsl.reflection.binding.frag.out || HASERROR=1
 $EXE -D -e main -l -q --hlsl-iomap --auto-map-bindings --stb 10 --sbb 20 --ssb 30 --suavb 40 --scb 50 -D -V -e main -Od hlsl.automap.frag > $TARGETDIR/hlsl.automap.frag.out
 diff -b $BASEDIR/hlsl.automap.frag.out $TARGETDIR/hlsl.automap.frag.out || HASERROR=1

 #
 # multi-threaded test
 #
 echo Comparing single thread to multithread for all tests in current directory...
 $EXE -i -C *.vert *.geom *.frag *.tes* *.comp > singleThread.out
 $EXE -i -C *.vert *.geom *.frag *.tes* *.comp -t > multiThread.out
 diff singleThread.out multiThread.out || HASERROR=1
 if [ $HASERROR -eq 0 ]
 then
     rm singleThread.out
     rm multiThread.out
 fi

 #
 # entry point renaming tests
 #
 echo Running entry-point renaming tests
 $EXE -i -H -V -D -e main_in_spv --ku --source-entrypoint main -Od hlsl.entry.rename.frag > $TARGETDIR/hlsl.entry.rename.frag.out
 diff -b $BASEDIR/hlsl.entry.rename.frag.out $TARGETDIR/hlsl.entry.rename.frag.out || HASERROR=1

 #
 # Testing ill-defined uncalled function
 #
 echo Running ill-defined uncalled function
 $EXE -D -e main -H -Od hlsl.deadFunctionMissingBody.vert > $TARGETDIR/hlsl.deadFunctionMissingBody.vert.out
 diff -b $BASEDIR/hlsl.deadFunctionMissingBody.vert.out $TARGETDIR/hlsl.deadFunctionMissingBody.vert.out || HASERROR=1

 if [ $HASERROR -eq 0 ]
 then
     echo Tests Succeeded.
 else
     echo Tests Failed.
 fi

 #
 # Testing -S
 #
 echo Running explicit stage test
 $EXE -i -S vert nosuffix > $TARGETDIR/nosuffix.out
 diff -b $BASEDIR/nosuffix.out $TARGETDIR/nosuffix.out || HASERROR=1

 #
 # Testing --hlsl-offsets
 #
 echo Running hlsl offsets
 $EXE -i --hlsl-offsets -H spv.hlslOffsets.vert > $TARGETDIR/spv.hlslOffsets.vert.out
 diff -b $BASEDIR/spv.hlslOffsets.vert.out $TARGETDIR/spv.hlslOffsets.vert.out || HASERROR=1

 echo Running hlsl offsets
 $EXE -i  --hlsl-offsets -D -e main -H -Od hlsl.hlslOffset.vert > $TARGETDIR/hlsl.hlslOffset.vert.out
 diff -b $BASEDIR/hlsl.hlslOffset.vert.out $TARGETDIR/hlsl.hlslOffset.vert.out || HASERROR=1

 #
 # Testing --resource-set-binding
 #
 echo Configuring HLSL descriptor set and binding number manually
 $EXE -V -D -e main -H -Od hlsl.multiDescriptorSet.frag --rsb frag t0 0 0 t1 1 0 s0 0 1 s1 1 1 b0 2 0 b1 2 1 b2 2 2 > $TARGETDIR/hlsl.multiDescriptorSet.frag.out
 diff -b $BASEDIR/hlsl.multiDescriptorSet.frag.out $TARGETDIR/hlsl.multiDescriptorSet.frag.out || HASERROR=1

 $EXE -V -D -e main -H -Od hlsl.explicitDescriptorSet.frag --hlsl-iomap --amb --ssb 10 --stb 20 --rsb 4 > $TARGETDIR/hlsl.explicitDescriptorSet.frag.out
 diff -b $BASEDIR/hlsl.explicitDescriptorSet.frag.out $TARGETDIR/hlsl.explicitDescriptorSet.frag.out || HASERROR=1

 $EXE -V -D -e main -H -Od hlsl.explicitDescriptorSet.frag --hlsl-iomap --amb --ssb 10 --stb 20 --rsb frag 3 > $TARGETDIR/hlsl.explicitDescriptorSet-2.frag.out
 diff -b $BASEDIR/hlsl.explicitDescriptorSet-2.frag.out $TARGETDIR/hlsl.explicitDescriptorSet-2.frag.out || HASERROR=1

 #
 # Testing per-descriptor-set IO map shift
 #
 echo 'Testing per-descriptor-set IO map shift'
 $EXE -e main --hlsl-iomap --ssb 10 1 15 2 --stb 20 --stb 25 2 --suavb 30 --suavb 40 2 --sub 50 6 -i -q -D -V hlsl.shift.per-set.frag > $TARGETDIR/hlsl.shift.per-set.frag.out || HASERROR=1
 diff -b $BASEDIR/hlsl.shift.per-set.frag.out $TARGETDIR/hlsl.shift.per-set.frag.out || HASERROR=1

 #
 # Testing location error
 #
 echo Testing SPV no location
 $EXE -V -C spv.noLocation.vert > $TARGETDIR/spv.noLocation.vert.out
 diff -b $BASEDIR/spv.noLocation.vert.out $TARGETDIR/spv.noLocation.vert.out || HASERROR=1
 $EXE -G -H --aml spv.noBuiltInLoc.vert > $TARGETDIR/spv.noBuiltInLoc.vert.out
 diff -b $BASEDIR/spv.noBuiltInLoc.vert.out $TARGETDIR/spv.noBuiltInLoc.vert.out || HASERROR=1
 $EXE -G spv.looseUniformNoLoc.vert > $TARGETDIR/spv.looseUniformNoLoc.vert.out
 diff -b $BASEDIR/spv.looseUniformNoLoc.vert.out $TARGETDIR/spv.looseUniformNoLoc.vert.out || HASERROR=1

 #
 # Testing debug information
 #
 echo Testing SPV Debug Information
 $EXE -g --relaxed-errors --suppress-warnings --aml --hlsl-offsets --nsf \
      -G -H spv.debugInfo.frag --rsb frag 3 > $TARGETDIR/spv.debugInfo.frag.out
 diff -b $BASEDIR/spv.debugInfo.frag.out $TARGETDIR/spv.debugInfo.frag.out || HASERROR=1
 $EXE -g -D -e newMain -g --amb --aml --fua --hlsl-iomap --nsf --sib 1 --ssb 2 --sbb 3 --stb 4 --suavb 5 --sub 6 \
      --sep origMain -H -Od spv.hlslDebugInfo.vert --rsb vert t0 0 0 > $TARGETDIR/spv.hlslDebugInfo.frag.out
 diff -b $BASEDIR/spv.hlslDebugInfo.frag.out $TARGETDIR/spv.hlslDebugInfo.frag.out || HASERROR=1

 #
 # Testing Includer
 #
 echo Testing Includer
 $EXE -D -e main -H -Od ../Test/hlsl.include.vert > $TARGETDIR/hlsl.include.vert.out
 diff -b $BASEDIR/hlsl.include.vert.out $TARGETDIR/hlsl.include.vert.out || HASERROR=1
 $EXE -D -e main -H -Od hlsl.includeNegative.vert > $TARGETDIR/hlsl.includeNegative.vert.out
 diff -b $BASEDIR/hlsl.includeNegative.vert.out $TARGETDIR/hlsl.includeNegative.vert.out || HASERROR=1
 $EXE -l -i include.vert > $TARGETDIR/include.vert.out
 diff -b $BASEDIR/include.vert.out $TARGETDIR/include.vert.out || HASERROR=1
 $EXE -D -e main -H -Od -Iinc1/path1 -Iinc1/path2 hlsl.dashI.vert > $TARGETDIR/hlsl.dashI.vert.out
 diff -b $BASEDIR/hlsl.dashI.vert.out $TARGETDIR/hlsl.dashI.vert.out || HASERROR=1

 #
 # Testing -D and -U
 #
 echo "Testing -D and -U"
 $EXE -DUNDEFED -UIN_SHADER -DFOO=200 -i -l -UUNDEFED -DMUL=FOO*2 glsl.-D-U.frag > $TARGETDIR/glsl.-D-U.frag.out
 diff -b $BASEDIR/glsl.-D-U.frag.out $TARGETDIR/glsl.-D-U.frag.out || HASERROR=1
 $EXE -D -e main -V -i -DUNDEFED -UIN_SHADER -DFOO=200 -UUNDEFED -Od hlsl.-D-U.frag > $TARGETDIR/hlsl.-D-U.frag.out
 diff -b $BASEDIR/hlsl.-D-U.frag.out $TARGETDIR/hlsl.-D-U.frag.out || HASERROR=1

 #
 # Test --client and --target-env
 #
 echo "Testing --client and --target-env"
 $EXE --client vulkan100      spv.targetVulkan.vert || HASERROR=1
 $EXE --client opengl100      spv.targetOpenGL.vert || HASERROR=1
 $EXE --target-env vulkan1.0  spv.targetVulkan.vert || HASERROR=1
 $EXE --target-env opengl     spv.targetOpenGL.vert || HASERROR=1
 $EXE -V100                   spv.targetVulkan.vert || HASERROR=1
 $EXE -G100                   spv.targetOpenGL.vert || HASERROR=1

 #
 # Testing GLSL entry point rename
 #
 echo "Testing GLSL entry point rename"
 $EXE -H -e foo --source-entrypoint main glsl.entryPointRename.vert > $TARGETDIR/glsl.entryPointRename.vert.out
 diff -b $BASEDIR/glsl.entryPointRename.vert.out $TARGETDIR/glsl.entryPointRename.vert.out || HASERROR=1
 $EXE -H -e foo --source-entrypoint bar glsl.entryPointRename.vert > $TARGETDIR/glsl.entryPointRename.vert.bad.out
 diff -b $BASEDIR/glsl.entryPointRename.vert.bad.out $TARGETDIR/glsl.entryPointRename.vert.bad.out || HASERROR=1
 $EXE -H -e foo --source-entrypoint main glsl.entryPointRename2.vert > $TARGETDIR/glsl.entryPointRename2.vert.out
 diff -b $BASEDIR/glsl.entryPointRename2.vert.out $TARGETDIR/glsl.entryPointRename2.vert.out || HASERROR=1

 #
 # Testing remapper error handling
 #
 echo "Testing remapper error handling"
 $REMAPEXE --do-everything -i remap.invalid-spirv-1.spv -o $TARGETDIR > $TARGETDIR/remap.invalid-spirv-1.out && HASERROR=1
 diff -b $BASEDIR/remap.invalid-spirv-1.out $TARGETDIR/remap.invalid-spirv-1.out || HASERROR=1
 $REMAPEXE --do-everything -i remap.invalid-spirv-2.spv -o $TARGETDIR > $TARGETDIR/remap.invalid-spirv-2.out && HASERROR=1
 diff -b $BASEDIR/remap.invalid-spirv-2.out $TARGETDIR/remap.invalid-spirv-2.out || HASERROR=1

 #
 # Testing position Y inversion
 #
 echo "Testing position Y inversion"
 $EXE -H -e main -V -D -H -i --iy hlsl.y-negate-1.vert > $TARGETDIR/hlsl.y-negate-1.vert.out
 diff -b $BASEDIR/hlsl.y-negate-1.vert.out $TARGETDIR/hlsl.y-negate-1.vert.out || HASERROR=1
 $EXE -H -e main -V -D -H -i --invert-y hlsl.y-negate-2.vert > $TARGETDIR/hlsl.y-negate-2.vert.out
 diff -b $BASEDIR/hlsl.y-negate-2.vert.out $TARGETDIR/hlsl.y-negate-2.vert.out || HASERROR=1
 $EXE -H -e main -V -D -H -i --invert-y hlsl.y-negate-3.vert > $TARGETDIR/hlsl.y-negate-3.vert.out
 diff -b $BASEDIR/hlsl.y-negate-3.vert.out $TARGETDIR/hlsl.y-negate-3.vert.out || HASERROR=1

 #
 # Final checking
 #
 if [ $HASERROR -eq 0 ]
 then
     echo Tests Succeeded.
 else
     echo Tests Failed.
 fi

 rm -f comp.spv frag.spv geom.spv tesc.spv tese.spv vert.spv

 exit $HASERROR
	#!/usr/bin/env bash

	TARGETDIR=localResults
	BASEDIR=baseResults
	EXE=../build/install/bin/glslangValidator
	REMAPEXE=../build/install/bin/spirv-remap
	HASERROR=0
	mkdir -p localResults

	if [ -a localtestlist ]
	then
	while read t; do
	echo Running $t...
	b=`basename $t`
	$EXE -i -l $t > $TARGETDIR/$b.out
	diff -b $BASEDIR/$b.out $TARGETDIR/$b.out \|\| HASERROR=1
	done < localtestlist
	fi

	rm -f comp.spv frag.spv geom.spv tesc.spv tese.spv vert.spv

	#
	# special tests
	#

	$EXE badMacroArgs.frag > $TARGETDIR/badMacroArgs.frag.out
	diff -b $BASEDIR/badMacroArgs.frag.out $TARGETDIR/badMacroArgs.frag.out \|\| HASERROR=1

	#
	# reflection tests
	#
	echo Running reflection...
	$EXE -l -q -C reflection.vert > $TARGETDIR/reflection.vert.out
	diff -b $BASEDIR/reflection.vert.out $TARGETDIR/reflection.vert.out \|\| HASERROR=1
	$EXE -D -e flizv -l -q -C -V -Od hlsl.reflection.vert > $TARGETDIR/hlsl.reflection.vert.out
	diff -b $BASEDIR/hlsl.reflection.vert.out $TARGETDIR/hlsl.reflection.vert.out \|\| HASERROR=1
	$EXE -D -e main -l -q -C -V -Od hlsl.reflection.binding.frag > $TARGETDIR/hlsl.reflection.binding.frag.out
	diff -b $BASEDIR/hlsl.reflection.binding.frag.out $TARGETDIR/hlsl.reflection.binding.frag.out \|\| HASERROR=1
	$EXE -D -e main -l -q --hlsl-iomap --auto-map-bindings --stb 10 --sbb 20 --ssb 30 --suavb 40 --scb 50 -D -V -e main -Od hlsl.automap.frag > $TARGETDIR/hlsl.automap.frag.out
	diff -b $BASEDIR/hlsl.automap.frag.out $TARGETDIR/hlsl.automap.frag.out \|\| HASERROR=1

	#
	# multi-threaded test
	#
	echo Comparing single thread to multithread for all tests in current directory...
	$EXE -i -C .vert .geom .frag .tes* *.comp > singleThread.out
	$EXE -i -C .vert .geom .frag .tes* *.comp -t > multiThread.out
	diff singleThread.out multiThread.out \|\| HASERROR=1
	if [ $HASERROR -eq 0 ]
	then
	rm singleThread.out
	rm multiThread.out
	fi

	#
	# entry point renaming tests
	#
	echo Running entry-point renaming tests
	$EXE -i -H -V -D -e main_in_spv --ku --source-entrypoint main -Od hlsl.entry.rename.frag > $TARGETDIR/hlsl.entry.rename.frag.out
	diff -b $BASEDIR/hlsl.entry.rename.frag.out $TARGETDIR/hlsl.entry.rename.frag.out \|\| HASERROR=1

	#
	# Testing ill-defined uncalled function
	#
	echo Running ill-defined uncalled function
	$EXE -D -e main -H -Od hlsl.deadFunctionMissingBody.vert > $TARGETDIR/hlsl.deadFunctionMissingBody.vert.out
	diff -b $BASEDIR/hlsl.deadFunctionMissingBody.vert.out $TARGETDIR/hlsl.deadFunctionMissingBody.vert.out \|\| HASERROR=1

	if [ $HASERROR -eq 0 ]
	then
	echo Tests Succeeded.
	else
	echo Tests Failed.
	fi

	#
	# Testing -S
	#
	echo Running explicit stage test
	$EXE -i -S vert nosuffix > $TARGETDIR/nosuffix.out
	diff -b $BASEDIR/nosuffix.out $TARGETDIR/nosuffix.out \|\| HASERROR=1

	#
	# Testing --hlsl-offsets
	#
	echo Running hlsl offsets
	$EXE -i --hlsl-offsets -H spv.hlslOffsets.vert > $TARGETDIR/spv.hlslOffsets.vert.out
	diff -b $BASEDIR/spv.hlslOffsets.vert.out $TARGETDIR/spv.hlslOffsets.vert.out \|\| HASERROR=1

	echo Running hlsl offsets
	$EXE -i --hlsl-offsets -D -e main -H -Od hlsl.hlslOffset.vert > $TARGETDIR/hlsl.hlslOffset.vert.out
	diff -b $BASEDIR/hlsl.hlslOffset.vert.out $TARGETDIR/hlsl.hlslOffset.vert.out \|\| HASERROR=1

	#
	# Testing --resource-set-binding
	#
	echo Configuring HLSL descriptor set and binding number manually
	$EXE -V -D -e main -H -Od hlsl.multiDescriptorSet.frag --rsb frag t0 0 0 t1 1 0 s0 0 1 s1 1 1 b0 2 0 b1 2 1 b2 2 2 > $TARGETDIR/hlsl.multiDescriptorSet.frag.out
	diff -b $BASEDIR/hlsl.multiDescriptorSet.frag.out $TARGETDIR/hlsl.multiDescriptorSet.frag.out \|\| HASERROR=1

	$EXE -V -D -e main -H -Od hlsl.explicitDescriptorSet.frag --hlsl-iomap --amb --ssb 10 --stb 20 --rsb 4 > $TARGETDIR/hlsl.explicitDescriptorSet.frag.out
	diff -b $BASEDIR/hlsl.explicitDescriptorSet.frag.out $TARGETDIR/hlsl.explicitDescriptorSet.frag.out \|\| HASERROR=1

	$EXE -V -D -e main -H -Od hlsl.explicitDescriptorSet.frag --hlsl-iomap --amb --ssb 10 --stb 20 --rsb frag 3 > $TARGETDIR/hlsl.explicitDescriptorSet-2.frag.out
	diff -b $BASEDIR/hlsl.explicitDescriptorSet-2.frag.out $TARGETDIR/hlsl.explicitDescriptorSet-2.frag.out \|\| HASERROR=1

	#
	# Testing per-descriptor-set IO map shift
	#
	echo 'Testing per-descriptor-set IO map shift'
	$EXE -e main --hlsl-iomap --ssb 10 1 15 2 --stb 20 --stb 25 2 --suavb 30 --suavb 40 2 --sub 50 6 -i -q -D -V hlsl.shift.per-set.frag > $TARGETDIR/hlsl.shift.per-set.frag.out \|\| HASERROR=1
	diff -b $BASEDIR/hlsl.shift.per-set.frag.out $TARGETDIR/hlsl.shift.per-set.frag.out \|\| HASERROR=1

	#
	# Testing location error
	#
	echo Testing SPV no location
	$EXE -V -C spv.noLocation.vert > $TARGETDIR/spv.noLocation.vert.out
	diff -b $BASEDIR/spv.noLocation.vert.out $TARGETDIR/spv.noLocation.vert.out \|\| HASERROR=1
	$EXE -G -H --aml spv.noBuiltInLoc.vert > $TARGETDIR/spv.noBuiltInLoc.vert.out
	diff -b $BASEDIR/spv.noBuiltInLoc.vert.out $TARGETDIR/spv.noBuiltInLoc.vert.out \|\| HASERROR=1
	$EXE -G spv.looseUniformNoLoc.vert > $TARGETDIR/spv.looseUniformNoLoc.vert.out
	diff -b $BASEDIR/spv.looseUniformNoLoc.vert.out $TARGETDIR/spv.looseUniformNoLoc.vert.out \|\| HASERROR=1

	#
	# Testing debug information
	#
	echo Testing SPV Debug Information
	$EXE -g --relaxed-errors --suppress-warnings --aml --hlsl-offsets --nsf \
	-G -H spv.debugInfo.frag --rsb frag 3 > $TARGETDIR/spv.debugInfo.frag.out
	diff -b $BASEDIR/spv.debugInfo.frag.out $TARGETDIR/spv.debugInfo.frag.out \|\| HASERROR=1
	$EXE -g -D -e newMain -g --amb --aml --fua --hlsl-iomap --nsf --sib 1 --ssb 2 --sbb 3 --stb 4 --suavb 5 --sub 6 \
	--sep origMain -H -Od spv.hlslDebugInfo.vert --rsb vert t0 0 0 > $TARGETDIR/spv.hlslDebugInfo.frag.out
	diff -b $BASEDIR/spv.hlslDebugInfo.frag.out $TARGETDIR/spv.hlslDebugInfo.frag.out \|\| HASERROR=1

	#
	# Testing Includer
	#
	echo Testing Includer
	$EXE -D -e main -H -Od ../Test/hlsl.include.vert > $TARGETDIR/hlsl.include.vert.out
	diff -b $BASEDIR/hlsl.include.vert.out $TARGETDIR/hlsl.include.vert.out \|\| HASERROR=1
	$EXE -D -e main -H -Od hlsl.includeNegative.vert > $TARGETDIR/hlsl.includeNegative.vert.out
	diff -b $BASEDIR/hlsl.includeNegative.vert.out $TARGETDIR/hlsl.includeNegative.vert.out \|\| HASERROR=1
	$EXE -l -i include.vert > $TARGETDIR/include.vert.out
	diff -b $BASEDIR/include.vert.out $TARGETDIR/include.vert.out \|\| HASERROR=1
	$EXE -D -e main -H -Od -Iinc1/path1 -Iinc1/path2 hlsl.dashI.vert > $TARGETDIR/hlsl.dashI.vert.out
	diff -b $BASEDIR/hlsl.dashI.vert.out $TARGETDIR/hlsl.dashI.vert.out \|\| HASERROR=1

	#
	# Testing -D and -U
	#
	echo "Testing -D and -U"
	$EXE -DUNDEFED -UIN_SHADER -DFOO=200 -i -l -UUNDEFED -DMUL=FOO*2 glsl.-D-U.frag > $TARGETDIR/glsl.-D-U.frag.out
	diff -b $BASEDIR/glsl.-D-U.frag.out $TARGETDIR/glsl.-D-U.frag.out \|\| HASERROR=1
	$EXE -D -e main -V -i -DUNDEFED -UIN_SHADER -DFOO=200 -UUNDEFED -Od hlsl.-D-U.frag > $TARGETDIR/hlsl.-D-U.frag.out
	diff -b $BASEDIR/hlsl.-D-U.frag.out $TARGETDIR/hlsl.-D-U.frag.out \|\| HASERROR=1

	#
	# Test --client and --target-env
	#
	echo "Testing --client and --target-env"
	$EXE --client vulkan100 spv.targetVulkan.vert \|\| HASERROR=1
	$EXE --client opengl100 spv.targetOpenGL.vert \|\| HASERROR=1
	$EXE --target-env vulkan1.0 spv.targetVulkan.vert \|\| HASERROR=1
	$EXE --target-env opengl spv.targetOpenGL.vert \|\| HASERROR=1
	$EXE -V100 spv.targetVulkan.vert \|\| HASERROR=1
	$EXE -G100 spv.targetOpenGL.vert \|\| HASERROR=1

	#
	# Testing GLSL entry point rename
	#
	echo "Testing GLSL entry point rename"
	$EXE -H -e foo --source-entrypoint main glsl.entryPointRename.vert > $TARGETDIR/glsl.entryPointRename.vert.out
	diff -b $BASEDIR/glsl.entryPointRename.vert.out $TARGETDIR/glsl.entryPointRename.vert.out \|\| HASERROR=1
	$EXE -H -e foo --source-entrypoint bar glsl.entryPointRename.vert > $TARGETDIR/glsl.entryPointRename.vert.bad.out
	diff -b $BASEDIR/glsl.entryPointRename.vert.bad.out $TARGETDIR/glsl.entryPointRename.vert.bad.out \|\| HASERROR=1
	$EXE -H -e foo --source-entrypoint main glsl.entryPointRename2.vert > $TARGETDIR/glsl.entryPointRename2.vert.out
	diff -b $BASEDIR/glsl.entryPointRename2.vert.out $TARGETDIR/glsl.entryPointRename2.vert.out \|\| HASERROR=1

	#
	# Testing remapper error handling
	#
	echo "Testing remapper error handling"
	$REMAPEXE --do-everything -i remap.invalid-spirv-1.spv -o $TARGETDIR > $TARGETDIR/remap.invalid-spirv-1.out && HASERROR=1
	diff -b $BASEDIR/remap.invalid-spirv-1.out $TARGETDIR/remap.invalid-spirv-1.out \|\| HASERROR=1
	$REMAPEXE --do-everything -i remap.invalid-spirv-2.spv -o $TARGETDIR > $TARGETDIR/remap.invalid-spirv-2.out && HASERROR=1
	diff -b $BASEDIR/remap.invalid-spirv-2.out $TARGETDIR/remap.invalid-spirv-2.out \|\| HASERROR=1

	#
	# Testing position Y inversion
	#
	echo "Testing position Y inversion"
	$EXE -H -e main -V -D -H -i --iy hlsl.y-negate-1.vert > $TARGETDIR/hlsl.y-negate-1.vert.out
	diff -b $BASEDIR/hlsl.y-negate-1.vert.out $TARGETDIR/hlsl.y-negate-1.vert.out \|\| HASERROR=1
	$EXE -H -e main -V -D -H -i --invert-y hlsl.y-negate-2.vert > $TARGETDIR/hlsl.y-negate-2.vert.out
	diff -b $BASEDIR/hlsl.y-negate-2.vert.out $TARGETDIR/hlsl.y-negate-2.vert.out \|\| HASERROR=1
	$EXE -H -e main -V -D -H -i --invert-y hlsl.y-negate-3.vert > $TARGETDIR/hlsl.y-negate-3.vert.out
	diff -b $BASEDIR/hlsl.y-negate-3.vert.out $TARGETDIR/hlsl.y-negate-3.vert.out \|\| HASERROR=1

	#
	# Final checking
	#
	if [ $HASERROR -eq 0 ]
	then
	echo Tests Succeeded.
	else
	echo Tests Failed.
	fi

	rm -f comp.spv frag.spv geom.spv tesc.spv tese.spv vert.spv

	exit $HASERROR