| // |
| //Copyright (C) 2002-2005 3Dlabs Inc. Ltd. |
| //Copyright (C) 2013 LunarG, Inc. |
| // |
| //All rights reserved. |
| // |
| //Redistribution and use in source and binary forms, with or without |
| //modification, are permitted provided that the following conditions |
| //are met: |
| // |
| // Redistributions of source code must retain the above copyright |
| // notice, this list of conditions and the following disclaimer. |
| // |
| // Redistributions in binary form must reproduce the above |
| // copyright notice, this list of conditions and the following |
| // disclaimer in the documentation and/or other materials provided |
| // with the distribution. |
| // |
| // Neither the name of 3Dlabs Inc. Ltd. nor the names of its |
| // contributors may be used to endorse or promote products derived |
| // from this software without specific prior written permission. |
| // |
| //THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| //"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| //LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS |
| //FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE |
| //COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, |
| //INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, |
| //BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| //LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
| //CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| //LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN |
| //ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| //POSSIBILITY OF SUCH DAMAGE. |
| // |
| |
| // this only applies to the standalone wrapper, not the front end in general |
| #define _CRT_SECURE_NO_WARNINGS |
| |
| #include "DefaultResourceLimits.h" |
| #include "Worklist.h" |
| #include "./../glslang/Include/ShHandle.h" |
| #include "./../glslang/Include/revision.h" |
| #include "./../glslang/Public/ShaderLang.h" |
| #include "../SPIRV/GlslangToSpv.h" |
| #include "../SPIRV/GLSL.std.450.h" |
| #include "../SPIRV/doc.h" |
| #include "../SPIRV/disassemble.h" |
| #include <string.h> |
| #include <stdlib.h> |
| #include <math.h> |
| |
| #include "../glslang/OSDependent/osinclude.h" |
| |
| extern "C" { |
| SH_IMPORT_EXPORT void ShOutputHtml(); |
| } |
| |
| // Command-line options |
| enum TOptions { |
| EOptionNone = 0x0000, |
| EOptionIntermediate = 0x0001, |
| EOptionSuppressInfolog = 0x0002, |
| EOptionMemoryLeakMode = 0x0004, |
| EOptionRelaxedErrors = 0x0008, |
| EOptionGiveWarnings = 0x0010, |
| EOptionLinkProgram = 0x0020, |
| EOptionMultiThreaded = 0x0040, |
| EOptionDumpConfig = 0x0080, |
| EOptionDumpReflection = 0x0100, |
| EOptionSuppressWarnings = 0x0200, |
| EOptionDumpVersions = 0x0400, |
| EOptionSpv = 0x0800, |
| EOptionHumanReadableSpv = 0x1000, |
| EOptionVulkanRules = 0x2000, |
| EOptionDefaultDesktop = 0x4000, |
| EOptionOutputPreprocessed = 0x8000, |
| }; |
| |
| // |
| // Return codes from main/exit(). |
| // |
| enum TFailCode { |
| ESuccess = 0, |
| EFailUsage, |
| EFailCompile, |
| EFailLink, |
| EFailCompilerCreate, |
| EFailThreadCreate, |
| EFailLinkerCreate |
| }; |
| |
| // |
| // Forward declarations. |
| // |
| EShLanguage FindLanguage(const std::string& name); |
| void CompileFile(const char* fileName, ShHandle); |
| void usage(); |
| void FreeFileData(char** data); |
| char** ReadFileData(const char* fileName); |
| void InfoLogMsg(const char* msg, const char* name, const int num); |
| |
| // Globally track if any compile or link failure. |
| bool CompileFailed = false; |
| bool LinkFailed = false; |
| |
| // Use to test breaking up a single shader file into multiple strings. |
| // Set in ReadFileData(). |
| int NumShaderStrings; |
| |
| TBuiltInResource Resources; |
| std::string ConfigFile; |
| |
| // |
| // Parse either a .conf file provided by the user or the default from glslang::DefaultTBuiltInResource |
| // |
| void ProcessConfigFile() |
| { |
| char** configStrings = 0; |
| char* config = 0; |
| if (ConfigFile.size() > 0) { |
| configStrings = ReadFileData(ConfigFile.c_str()); |
| if (configStrings) |
| config = *configStrings; |
| else { |
| printf("Error opening configuration file; will instead use the default configuration\n"); |
| usage(); |
| } |
| } |
| |
| if (config == 0) { |
| Resources = glslang::DefaultTBuiltInResource; |
| return; |
| } |
| |
| const char* delims = " \t\n\r"; |
| const char* token = strtok(config, delims); |
| while (token) { |
| const char* valueStr = strtok(0, delims); |
| if (valueStr == 0 || ! (valueStr[0] == '-' || (valueStr[0] >= '0' && valueStr[0] <= '9'))) { |
| printf("Error: '%s' bad .conf file. Each name must be followed by one number.\n", valueStr ? valueStr : ""); |
| return; |
| } |
| int value = atoi(valueStr); |
| |
| if (strcmp(token, "MaxLights") == 0) |
| Resources.maxLights = value; |
| else if (strcmp(token, "MaxClipPlanes") == 0) |
| Resources.maxClipPlanes = value; |
| else if (strcmp(token, "MaxTextureUnits") == 0) |
| Resources.maxTextureUnits = value; |
| else if (strcmp(token, "MaxTextureCoords") == 0) |
| Resources.maxTextureCoords = value; |
| else if (strcmp(token, "MaxVertexAttribs") == 0) |
| Resources.maxVertexAttribs = value; |
| else if (strcmp(token, "MaxVertexUniformComponents") == 0) |
| Resources.maxVertexUniformComponents = value; |
| else if (strcmp(token, "MaxVaryingFloats") == 0) |
| Resources.maxVaryingFloats = value; |
| else if (strcmp(token, "MaxVertexTextureImageUnits") == 0) |
| Resources.maxVertexTextureImageUnits = value; |
| else if (strcmp(token, "MaxCombinedTextureImageUnits") == 0) |
| Resources.maxCombinedTextureImageUnits = value; |
| else if (strcmp(token, "MaxTextureImageUnits") == 0) |
| Resources.maxTextureImageUnits = value; |
| else if (strcmp(token, "MaxFragmentUniformComponents") == 0) |
| Resources.maxFragmentUniformComponents = value; |
| else if (strcmp(token, "MaxDrawBuffers") == 0) |
| Resources.maxDrawBuffers = value; |
| else if (strcmp(token, "MaxVertexUniformVectors") == 0) |
| Resources.maxVertexUniformVectors = value; |
| else if (strcmp(token, "MaxVaryingVectors") == 0) |
| Resources.maxVaryingVectors = value; |
| else if (strcmp(token, "MaxFragmentUniformVectors") == 0) |
| Resources.maxFragmentUniformVectors = value; |
| else if (strcmp(token, "MaxVertexOutputVectors") == 0) |
| Resources.maxVertexOutputVectors = value; |
| else if (strcmp(token, "MaxFragmentInputVectors") == 0) |
| Resources.maxFragmentInputVectors = value; |
| else if (strcmp(token, "MinProgramTexelOffset") == 0) |
| Resources.minProgramTexelOffset = value; |
| else if (strcmp(token, "MaxProgramTexelOffset") == 0) |
| Resources.maxProgramTexelOffset = value; |
| else if (strcmp(token, "MaxClipDistances") == 0) |
| Resources.maxClipDistances = value; |
| else if (strcmp(token, "MaxComputeWorkGroupCountX") == 0) |
| Resources.maxComputeWorkGroupCountX = value; |
| else if (strcmp(token, "MaxComputeWorkGroupCountY") == 0) |
| Resources.maxComputeWorkGroupCountY = value; |
| else if (strcmp(token, "MaxComputeWorkGroupCountZ") == 0) |
| Resources.maxComputeWorkGroupCountZ = value; |
| else if (strcmp(token, "MaxComputeWorkGroupSizeX") == 0) |
| Resources.maxComputeWorkGroupSizeX = value; |
| else if (strcmp(token, "MaxComputeWorkGroupSizeY") == 0) |
| Resources.maxComputeWorkGroupSizeY = value; |
| else if (strcmp(token, "MaxComputeWorkGroupSizeZ") == 0) |
| Resources.maxComputeWorkGroupSizeZ = value; |
| else if (strcmp(token, "MaxComputeUniformComponents") == 0) |
| Resources.maxComputeUniformComponents = value; |
| else if (strcmp(token, "MaxComputeTextureImageUnits") == 0) |
| Resources.maxComputeTextureImageUnits = value; |
| else if (strcmp(token, "MaxComputeImageUniforms") == 0) |
| Resources.maxComputeImageUniforms = value; |
| else if (strcmp(token, "MaxComputeAtomicCounters") == 0) |
| Resources.maxComputeAtomicCounters = value; |
| else if (strcmp(token, "MaxComputeAtomicCounterBuffers") == 0) |
| Resources.maxComputeAtomicCounterBuffers = value; |
| else if (strcmp(token, "MaxVaryingComponents") == 0) |
| Resources.maxVaryingComponents = value; |
| else if (strcmp(token, "MaxVertexOutputComponents") == 0) |
| Resources.maxVertexOutputComponents = value; |
| else if (strcmp(token, "MaxGeometryInputComponents") == 0) |
| Resources.maxGeometryInputComponents = value; |
| else if (strcmp(token, "MaxGeometryOutputComponents") == 0) |
| Resources.maxGeometryOutputComponents = value; |
| else if (strcmp(token, "MaxFragmentInputComponents") == 0) |
| Resources.maxFragmentInputComponents = value; |
| else if (strcmp(token, "MaxImageUnits") == 0) |
| Resources.maxImageUnits = value; |
| else if (strcmp(token, "MaxCombinedImageUnitsAndFragmentOutputs") == 0) |
| Resources.maxCombinedImageUnitsAndFragmentOutputs = value; |
| else if (strcmp(token, "MaxCombinedShaderOutputResources") == 0) |
| Resources.maxCombinedShaderOutputResources = value; |
| else if (strcmp(token, "MaxImageSamples") == 0) |
| Resources.maxImageSamples = value; |
| else if (strcmp(token, "MaxVertexImageUniforms") == 0) |
| Resources.maxVertexImageUniforms = value; |
| else if (strcmp(token, "MaxTessControlImageUniforms") == 0) |
| Resources.maxTessControlImageUniforms = value; |
| else if (strcmp(token, "MaxTessEvaluationImageUniforms") == 0) |
| Resources.maxTessEvaluationImageUniforms = value; |
| else if (strcmp(token, "MaxGeometryImageUniforms") == 0) |
| Resources.maxGeometryImageUniforms = value; |
| else if (strcmp(token, "MaxFragmentImageUniforms") == 0) |
| Resources.maxFragmentImageUniforms = value; |
| else if (strcmp(token, "MaxCombinedImageUniforms") == 0) |
| Resources.maxCombinedImageUniforms = value; |
| else if (strcmp(token, "MaxGeometryTextureImageUnits") == 0) |
| Resources.maxGeometryTextureImageUnits = value; |
| else if (strcmp(token, "MaxGeometryOutputVertices") == 0) |
| Resources.maxGeometryOutputVertices = value; |
| else if (strcmp(token, "MaxGeometryTotalOutputComponents") == 0) |
| Resources.maxGeometryTotalOutputComponents = value; |
| else if (strcmp(token, "MaxGeometryUniformComponents") == 0) |
| Resources.maxGeometryUniformComponents = value; |
| else if (strcmp(token, "MaxGeometryVaryingComponents") == 0) |
| Resources.maxGeometryVaryingComponents = value; |
| else if (strcmp(token, "MaxTessControlInputComponents") == 0) |
| Resources.maxTessControlInputComponents = value; |
| else if (strcmp(token, "MaxTessControlOutputComponents") == 0) |
| Resources.maxTessControlOutputComponents = value; |
| else if (strcmp(token, "MaxTessControlTextureImageUnits") == 0) |
| Resources.maxTessControlTextureImageUnits = value; |
| else if (strcmp(token, "MaxTessControlUniformComponents") == 0) |
| Resources.maxTessControlUniformComponents = value; |
| else if (strcmp(token, "MaxTessControlTotalOutputComponents") == 0) |
| Resources.maxTessControlTotalOutputComponents = value; |
| else if (strcmp(token, "MaxTessEvaluationInputComponents") == 0) |
| Resources.maxTessEvaluationInputComponents = value; |
| else if (strcmp(token, "MaxTessEvaluationOutputComponents") == 0) |
| Resources.maxTessEvaluationOutputComponents = value; |
| else if (strcmp(token, "MaxTessEvaluationTextureImageUnits") == 0) |
| Resources.maxTessEvaluationTextureImageUnits = value; |
| else if (strcmp(token, "MaxTessEvaluationUniformComponents") == 0) |
| Resources.maxTessEvaluationUniformComponents = value; |
| else if (strcmp(token, "MaxTessPatchComponents") == 0) |
| Resources.maxTessPatchComponents = value; |
| else if (strcmp(token, "MaxPatchVertices") == 0) |
| Resources.maxPatchVertices = value; |
| else if (strcmp(token, "MaxTessGenLevel") == 0) |
| Resources.maxTessGenLevel = value; |
| else if (strcmp(token, "MaxViewports") == 0) |
| Resources.maxViewports = value; |
| else if (strcmp(token, "MaxVertexAtomicCounters") == 0) |
| Resources.maxVertexAtomicCounters = value; |
| else if (strcmp(token, "MaxTessControlAtomicCounters") == 0) |
| Resources.maxTessControlAtomicCounters = value; |
| else if (strcmp(token, "MaxTessEvaluationAtomicCounters") == 0) |
| Resources.maxTessEvaluationAtomicCounters = value; |
| else if (strcmp(token, "MaxGeometryAtomicCounters") == 0) |
| Resources.maxGeometryAtomicCounters = value; |
| else if (strcmp(token, "MaxFragmentAtomicCounters") == 0) |
| Resources.maxFragmentAtomicCounters = value; |
| else if (strcmp(token, "MaxCombinedAtomicCounters") == 0) |
| Resources.maxCombinedAtomicCounters = value; |
| else if (strcmp(token, "MaxAtomicCounterBindings") == 0) |
| Resources.maxAtomicCounterBindings = value; |
| else if (strcmp(token, "MaxVertexAtomicCounterBuffers") == 0) |
| Resources.maxVertexAtomicCounterBuffers = value; |
| else if (strcmp(token, "MaxTessControlAtomicCounterBuffers") == 0) |
| Resources.maxTessControlAtomicCounterBuffers = value; |
| else if (strcmp(token, "MaxTessEvaluationAtomicCounterBuffers") == 0) |
| Resources.maxTessEvaluationAtomicCounterBuffers = value; |
| else if (strcmp(token, "MaxGeometryAtomicCounterBuffers") == 0) |
| Resources.maxGeometryAtomicCounterBuffers = value; |
| else if (strcmp(token, "MaxFragmentAtomicCounterBuffers") == 0) |
| Resources.maxFragmentAtomicCounterBuffers = value; |
| else if (strcmp(token, "MaxCombinedAtomicCounterBuffers") == 0) |
| Resources.maxCombinedAtomicCounterBuffers = value; |
| else if (strcmp(token, "MaxAtomicCounterBufferSize") == 0) |
| Resources.maxAtomicCounterBufferSize = value; |
| else if (strcmp(token, "MaxTransformFeedbackBuffers") == 0) |
| Resources.maxTransformFeedbackBuffers = value; |
| else if (strcmp(token, "MaxTransformFeedbackInterleavedComponents") == 0) |
| Resources.maxTransformFeedbackInterleavedComponents = value; |
| else if (strcmp(token, "MaxCullDistances") == 0) |
| Resources.maxCullDistances = value; |
| else if (strcmp(token, "MaxCombinedClipAndCullDistances") == 0) |
| Resources.maxCombinedClipAndCullDistances = value; |
| else if (strcmp(token, "MaxSamples") == 0) |
| Resources.maxSamples = value; |
| |
| else if (strcmp(token, "nonInductiveForLoops") == 0) |
| Resources.limits.nonInductiveForLoops = (value != 0); |
| else if (strcmp(token, "whileLoops") == 0) |
| Resources.limits.whileLoops = (value != 0); |
| else if (strcmp(token, "doWhileLoops") == 0) |
| Resources.limits.doWhileLoops = (value != 0); |
| else if (strcmp(token, "generalUniformIndexing") == 0) |
| Resources.limits.generalUniformIndexing = (value != 0); |
| else if (strcmp(token, "generalAttributeMatrixVectorIndexing") == 0) |
| Resources.limits.generalAttributeMatrixVectorIndexing = (value != 0); |
| else if (strcmp(token, "generalVaryingIndexing") == 0) |
| Resources.limits.generalVaryingIndexing = (value != 0); |
| else if (strcmp(token, "generalSamplerIndexing") == 0) |
| Resources.limits.generalSamplerIndexing = (value != 0); |
| else if (strcmp(token, "generalVariableIndexing") == 0) |
| Resources.limits.generalVariableIndexing = (value != 0); |
| else if (strcmp(token, "generalConstantMatrixVectorIndexing") == 0) |
| Resources.limits.generalConstantMatrixVectorIndexing = (value != 0); |
| else |
| printf("Warning: unrecognized limit (%s) in configuration file.\n", token); |
| |
| token = strtok(0, delims); |
| } |
| if (configStrings) |
| FreeFileData(configStrings); |
| else |
| delete[] config; |
| } |
| |
| // thread-safe list of shaders to asynchronously grab and compile |
| glslang::TWorklist Worklist; |
| |
| // array of unique places to leave the shader names and infologs for the asynchronous compiles |
| glslang::TWorkItem** Work = 0; |
| int NumWorkItems = 0; |
| |
| int Options = 0; |
| const char* ExecutableName = nullptr; |
| const char* binaryFileName = nullptr; |
| |
| // |
| // Create the default name for saving a binary if -o is not provided. |
| // |
| const char* GetBinaryName(EShLanguage stage) |
| { |
| const char* name; |
| if (binaryFileName == nullptr) { |
| switch (stage) { |
| case EShLangVertex: name = "vert.spv"; break; |
| case EShLangTessControl: name = "tesc.spv"; break; |
| case EShLangTessEvaluation: name = "tese.spv"; break; |
| case EShLangGeometry: name = "geom.spv"; break; |
| case EShLangFragment: name = "frag.spv"; break; |
| case EShLangCompute: name = "comp.spv"; break; |
| default: name = "unknown"; break; |
| } |
| } else |
| name = binaryFileName; |
| |
| return name; |
| } |
| |
| // |
| // *.conf => this is a config file that can set limits/resources |
| // |
| bool SetConfigFile(const std::string& name) |
| { |
| if (name.size() < 5) |
| return false; |
| |
| if (name.compare(name.size() - 5, 5, ".conf") == 0) { |
| ConfigFile = name; |
| return true; |
| } |
| |
| return false; |
| } |
| |
| // |
| // Give error and exit with failure code. |
| // |
| void Error(const char* message) |
| { |
| printf("%s: Error %s (use -h for usage)\n", ExecutableName, message); |
| exit(EFailUsage); |
| } |
| |
| // |
| // Do all command-line argument parsing. This includes building up the work-items |
| // to be processed later, and saving all the command-line options. |
| // |
| // Does not return (it exits) if command-line is fatally flawed. |
| // |
| void ProcessArguments(int argc, char* argv[]) |
| { |
| ExecutableName = argv[0]; |
| NumWorkItems = argc; // will include some empties where the '-' options were, but it doesn't matter, they'll be 0 |
| Work = new glslang::TWorkItem*[NumWorkItems]; |
| for (int w = 0; w < NumWorkItems; ++w) |
| Work[w] = 0; |
| |
| argc--; |
| argv++; |
| for (; argc >= 1; argc--, argv++) { |
| if (argv[0][0] == '-') { |
| switch (argv[0][1]) { |
| case 'H': |
| Options |= EOptionHumanReadableSpv; |
| // fall through to -V |
| case 'V': |
| Options |= EOptionSpv; |
| Options |= EOptionVulkanRules; |
| Options |= EOptionLinkProgram; |
| break; |
| case 'G': |
| Options |= EOptionSpv; |
| Options |= EOptionLinkProgram; |
| break; |
| case 'E': |
| Options |= EOptionOutputPreprocessed; |
| break; |
| case 'c': |
| Options |= EOptionDumpConfig; |
| break; |
| case 'd': |
| Options |= EOptionDefaultDesktop; |
| break; |
| case 'h': |
| usage(); |
| break; |
| case 'i': |
| Options |= EOptionIntermediate; |
| break; |
| case 'l': |
| Options |= EOptionLinkProgram; |
| break; |
| case 'm': |
| Options |= EOptionMemoryLeakMode; |
| break; |
| case 'o': |
| binaryFileName = argv[1]; |
| if (argc > 0) { |
| argc--; |
| argv++; |
| } else |
| Error("no <file> provided for -o"); |
| break; |
| case 'q': |
| Options |= EOptionDumpReflection; |
| break; |
| case 'r': |
| Options |= EOptionRelaxedErrors; |
| break; |
| case 's': |
| Options |= EOptionSuppressInfolog; |
| break; |
| case 't': |
| #ifdef _WIN32 |
| Options |= EOptionMultiThreaded; |
| #endif |
| break; |
| case 'v': |
| Options |= EOptionDumpVersions; |
| break; |
| case 'w': |
| Options |= EOptionSuppressWarnings; |
| break; |
| default: |
| usage(); |
| break; |
| } |
| } else { |
| std::string name(argv[0]); |
| if (! SetConfigFile(name)) { |
| Work[argc] = new glslang::TWorkItem(name); |
| Worklist.add(Work[argc]); |
| } |
| } |
| } |
| |
| // Make sure that -E is not specified alongside linking (which includes SPV generation) |
| if ((Options & EOptionOutputPreprocessed) && (Options & EOptionLinkProgram)) |
| Error("can't use -E when linking is selected"); |
| |
| // -o makes no sense if there is no target binary |
| if (binaryFileName && (Options & EOptionSpv) == 0) |
| Error("no binary generation requested (e.g., -V)"); |
| } |
| |
| // |
| // Translate the meaningful subset of command-line options to parser-behavior options. |
| // |
| void SetMessageOptions(EShMessages& messages) |
| { |
| if (Options & EOptionRelaxedErrors) |
| messages = (EShMessages)(messages | EShMsgRelaxedErrors); |
| if (Options & EOptionIntermediate) |
| messages = (EShMessages)(messages | EShMsgAST); |
| if (Options & EOptionSuppressWarnings) |
| messages = (EShMessages)(messages | EShMsgSuppressWarnings); |
| if (Options & EOptionSpv) |
| messages = (EShMessages)(messages | EShMsgSpvRules); |
| if (Options & EOptionVulkanRules) |
| messages = (EShMessages)(messages | EShMsgVulkanRules); |
| if (Options & EOptionOutputPreprocessed) |
| messages = (EShMessages)(messages | EShMsgOnlyPreprocessor); |
| } |
| |
| // |
| // Thread entry point, for non-linking asynchronous mode. |
| // |
| // Return 0 for failure, 1 for success. |
| // |
| unsigned int CompileShaders(void*) |
| { |
| glslang::TWorkItem* workItem; |
| while (Worklist.remove(workItem)) { |
| ShHandle compiler = ShConstructCompiler(FindLanguage(workItem->name), Options); |
| if (compiler == 0) |
| return 0; |
| |
| CompileFile(workItem->name.c_str(), compiler); |
| |
| if (! (Options & EOptionSuppressInfolog)) |
| workItem->results = ShGetInfoLog(compiler); |
| |
| ShDestruct(compiler); |
| } |
| |
| return 0; |
| } |
| |
| // Outputs the given string, but only if it is non-null and non-empty. |
| // This prevents erroneous newlines from appearing. |
| void PutsIfNonEmpty(const char* str) |
| { |
| if (str && str[0]) { |
| puts(str); |
| } |
| } |
| |
| // Outputs the given string to stderr, but only if it is non-null and non-empty. |
| // This prevents erroneous newlines from appearing. |
| void StderrIfNonEmpty(const char* str) |
| { |
| if (str && str[0]) { |
| fprintf(stderr, "%s\n", str); |
| } |
| } |
| |
| // Simple bundling of what makes a compilation unit for ease in passing around, |
| // and separation of handling file IO versus API (programmatic) compilation. |
| struct ShaderCompUnit { |
| EShLanguage stage; |
| std::string fileName; |
| char** text; // memory owned/managed externally |
| }; |
| |
| // |
| // For linking mode: Will independently parse each compilation unit, but then put them |
| // in the same program and link them together, making at most one linked module per |
| // pipeline stage. |
| // |
| // Uses the new C++ interface instead of the old handle-based interface. |
| // |
| |
| void CompileAndLinkShaderUnits(std::vector<ShaderCompUnit> compUnits) |
| { |
| // keep track of what to free |
| std::list<glslang::TShader*> shaders; |
| |
| EShMessages messages = EShMsgDefault; |
| SetMessageOptions(messages); |
| |
| // |
| // Per-shader processing... |
| // |
| |
| glslang::TProgram& program = *new glslang::TProgram; |
| for (auto it = compUnits.cbegin(); it != compUnits.cend(); ++it) { |
| const auto &compUnit = *it; |
| glslang::TShader* shader = new glslang::TShader(compUnit.stage); |
| shader->setStrings(compUnit.text, 1); |
| shaders.push_back(shader); |
| |
| const int defaultVersion = Options & EOptionDefaultDesktop? 110: 100; |
| |
| if (Options & EOptionOutputPreprocessed) { |
| std::string str; |
| glslang::TShader::ForbidInclude includer; |
| if (shader->preprocess(&Resources, defaultVersion, ENoProfile, false, false, |
| messages, &str, includer)) { |
| PutsIfNonEmpty(str.c_str()); |
| } else { |
| CompileFailed = true; |
| } |
| StderrIfNonEmpty(shader->getInfoLog()); |
| StderrIfNonEmpty(shader->getInfoDebugLog()); |
| continue; |
| } |
| if (! shader->parse(&Resources, defaultVersion, false, messages)) |
| CompileFailed = true; |
| |
| program.addShader(shader); |
| |
| if (! (Options & EOptionSuppressInfolog) && |
| ! (Options & EOptionMemoryLeakMode)) { |
| PutsIfNonEmpty(compUnit.fileName.c_str()); |
| PutsIfNonEmpty(shader->getInfoLog()); |
| PutsIfNonEmpty(shader->getInfoDebugLog()); |
| } |
| } |
| |
| // |
| // Program-level processing... |
| // |
| |
| if (! (Options & EOptionOutputPreprocessed) && ! program.link(messages)) |
| LinkFailed = true; |
| |
| if (! (Options & EOptionSuppressInfolog) && |
| ! (Options & EOptionMemoryLeakMode)) { |
| PutsIfNonEmpty(program.getInfoLog()); |
| PutsIfNonEmpty(program.getInfoDebugLog()); |
| } |
| |
| if (Options & EOptionDumpReflection) { |
| program.buildReflection(); |
| program.dumpReflection(); |
| } |
| |
| if (Options & EOptionSpv) { |
| if (CompileFailed || LinkFailed) |
| printf("SPIR-V is not generated for failed compile or link\n"); |
| else { |
| for (int stage = 0; stage < EShLangCount; ++stage) { |
| if (program.getIntermediate((EShLanguage)stage)) { |
| std::vector<unsigned int> spirv; |
| glslang::GlslangToSpv(*program.getIntermediate((EShLanguage)stage), spirv); |
| |
| // Dump the spv to a file or stdout, etc., but only if not doing |
| // memory/perf testing, as it's not internal to programmatic use. |
| if (! (Options & EOptionMemoryLeakMode)) { |
| glslang::OutputSpv(spirv, GetBinaryName((EShLanguage)stage)); |
| if (Options & EOptionHumanReadableSpv) { |
| spv::Disassemble(std::cout, spirv); |
| } |
| } |
| } |
| } |
| } |
| } |
| |
| // Free everything up, program has to go before the shaders |
| // because it might have merged stuff from the shaders, and |
| // the stuff from the shaders has to have its destructors called |
| // before the pools holding the memory in the shaders is freed. |
| delete &program; |
| while (shaders.size() > 0) { |
| delete shaders.back(); |
| shaders.pop_back(); |
| } |
| } |
| |
| // |
| // Do file IO part of compile and link, handing off the pure |
| // API/programmatic mode to CompileAndLinkShaderUnits(), which can |
| // be put in a loop for testing memory footprint and performance. |
| // |
| // This is just for linking mode: meaning all the shaders will be put into the |
| // the same program linked together. |
| // |
| // This means there are a limited number of work items (not multi-threading mode) |
| // and that the point is testing at the linking level. Hence, to enable |
| // performance and memory testing, the actual compile/link can be put in |
| // a loop, independent of processing the work items and file IO. |
| // |
| void CompileAndLinkShaderFiles() |
| { |
| std::vector<ShaderCompUnit> compUnits; |
| |
| // Transfer all the work items from to a simple list of |
| // of compilation units. (We don't care about the thread |
| // work-item distribution properties in this path, which |
| // is okay due to the limited number of shaders, know since |
| // they are all getting linked together.) |
| glslang::TWorkItem* workItem; |
| while (Worklist.remove(workItem)) { |
| ShaderCompUnit compUnit = { |
| FindLanguage(workItem->name), |
| workItem->name, |
| ReadFileData(workItem->name.c_str()) |
| }; |
| |
| if (! compUnit.text) { |
| usage(); |
| return; |
| } |
| |
| compUnits.push_back(compUnit); |
| } |
| |
| // Actual call to programmatic processing of compile and link, |
| // in a loop for testing memory and performance. This part contains |
| // all the perf/memory that a programmatic consumer will care about. |
| for (int i = 0; i < ((Options & EOptionMemoryLeakMode) ? 100 : 1); ++i) { |
| for (int j = 0; j < ((Options & EOptionMemoryLeakMode) ? 100 : 1); ++j) |
| CompileAndLinkShaderUnits(compUnits); |
| |
| if (Options & EOptionMemoryLeakMode) |
| glslang::OS_DumpMemoryCounters(); |
| } |
| |
| for (auto it = compUnits.begin(); it != compUnits.end(); ++it) |
| FreeFileData(it->text); |
| } |
| |
| int C_DECL main(int argc, char* argv[]) |
| { |
| ProcessArguments(argc, argv); |
| |
| if (Options & EOptionDumpConfig) { |
| printf("%s", glslang::GetDefaultTBuiltInResourceString().c_str()); |
| if (Worklist.empty()) |
| return ESuccess; |
| } |
| |
| if (Options & EOptionDumpVersions) { |
| printf("Glslang Version: %s %s\n", GLSLANG_REVISION, GLSLANG_DATE); |
| printf("ESSL Version: %s\n", glslang::GetEsslVersionString()); |
| printf("GLSL Version: %s\n", glslang::GetGlslVersionString()); |
| std::string spirvVersion; |
| glslang::GetSpirvVersion(spirvVersion); |
| printf("SPIR-V Version %s\n", spirvVersion.c_str()); |
| printf("GLSL.std.450 Version %d, Revision %d\n", GLSLstd450Version, GLSLstd450Revision); |
| printf("Khronos Tool ID %d\n", glslang::GetKhronosToolId()); |
| if (Worklist.empty()) |
| return ESuccess; |
| } |
| |
| if (Worklist.empty()) { |
| usage(); |
| } |
| |
| ProcessConfigFile(); |
| |
| // |
| // Two modes: |
| // 1) linking all arguments together, single-threaded, new C++ interface |
| // 2) independent arguments, can be tackled by multiple asynchronous threads, for testing thread safety, using the old handle interface |
| // |
| if (Options & EOptionLinkProgram || |
| Options & EOptionOutputPreprocessed) { |
| glslang::InitializeProcess(); |
| CompileAndLinkShaderFiles(); |
| glslang::FinalizeProcess(); |
| for (int w = 0; w < NumWorkItems; ++w) { |
| if (Work[w]) { |
| delete Work[w]; |
| } |
| } |
| } else { |
| ShInitialize(); |
| |
| bool printShaderNames = Worklist.size() > 1; |
| |
| if (Options & EOptionMultiThreaded) { |
| const int NumThreads = 16; |
| void* threads[NumThreads]; |
| for (int t = 0; t < NumThreads; ++t) { |
| threads[t] = glslang::OS_CreateThread(&CompileShaders); |
| if (! threads[t]) { |
| printf("Failed to create thread\n"); |
| return EFailThreadCreate; |
| } |
| } |
| glslang::OS_WaitForAllThreads(threads, NumThreads); |
| } else |
| CompileShaders(0); |
| |
| // Print out all the resulting infologs |
| for (int w = 0; w < NumWorkItems; ++w) { |
| if (Work[w]) { |
| if (printShaderNames || Work[w]->results.size() > 0) |
| PutsIfNonEmpty(Work[w]->name.c_str()); |
| PutsIfNonEmpty(Work[w]->results.c_str()); |
| delete Work[w]; |
| } |
| } |
| |
| ShFinalize(); |
| } |
| |
| delete[] Work; |
| |
| if (CompileFailed) |
| return EFailCompile; |
| if (LinkFailed) |
| return EFailLink; |
| |
| return 0; |
| } |
| |
| // |
| // Deduce the language from the filename. Files must end in one of the |
| // following extensions: |
| // |
| // .vert = vertex |
| // .tesc = tessellation control |
| // .tese = tessellation evaluation |
| // .geom = geometry |
| // .frag = fragment |
| // .comp = compute |
| // |
| EShLanguage FindLanguage(const std::string& name) |
| { |
| size_t ext = name.rfind('.'); |
| if (ext == std::string::npos) { |
| usage(); |
| return EShLangVertex; |
| } |
| |
| std::string suffix = name.substr(ext + 1, std::string::npos); |
| if (suffix == "vert") |
| return EShLangVertex; |
| else if (suffix == "tesc") |
| return EShLangTessControl; |
| else if (suffix == "tese") |
| return EShLangTessEvaluation; |
| else if (suffix == "geom") |
| return EShLangGeometry; |
| else if (suffix == "frag") |
| return EShLangFragment; |
| else if (suffix == "comp") |
| return EShLangCompute; |
| |
| usage(); |
| return EShLangVertex; |
| } |
| |
| // |
| // Read a file's data into a string, and compile it using the old interface ShCompile, |
| // for non-linkable results. |
| // |
| void CompileFile(const char* fileName, ShHandle compiler) |
| { |
| int ret = 0; |
| char** shaderStrings = ReadFileData(fileName); |
| if (! shaderStrings) { |
| usage(); |
| } |
| |
| int* lengths = new int[NumShaderStrings]; |
| |
| // move to length-based strings, rather than null-terminated strings |
| for (int s = 0; s < NumShaderStrings; ++s) |
| lengths[s] = (int)strlen(shaderStrings[s]); |
| |
| if (! shaderStrings) { |
| CompileFailed = true; |
| return; |
| } |
| |
| EShMessages messages = EShMsgDefault; |
| SetMessageOptions(messages); |
| |
| for (int i = 0; i < ((Options & EOptionMemoryLeakMode) ? 100 : 1); ++i) { |
| for (int j = 0; j < ((Options & EOptionMemoryLeakMode) ? 100 : 1); ++j) { |
| //ret = ShCompile(compiler, shaderStrings, NumShaderStrings, lengths, EShOptNone, &Resources, Options, (Options & EOptionDefaultDesktop) ? 110 : 100, false, messages); |
| ret = ShCompile(compiler, shaderStrings, NumShaderStrings, nullptr, EShOptNone, &Resources, Options, (Options & EOptionDefaultDesktop) ? 110 : 100, false, messages); |
| //const char* multi[12] = { "# ve", "rsion", " 300 e", "s", "\n#err", |
| // "or should be l", "ine 1", "string 5\n", "float glo", "bal", |
| // ";\n#error should be line 2\n void main() {", "global = 2.3;}" }; |
| //const char* multi[7] = { "/", "/", "\\", "\n", "\n", "#", "version 300 es" }; |
| //ret = ShCompile(compiler, multi, 7, nullptr, EShOptNone, &Resources, Options, (Options & EOptionDefaultDesktop) ? 110 : 100, false, messages); |
| } |
| |
| if (Options & EOptionMemoryLeakMode) |
| glslang::OS_DumpMemoryCounters(); |
| } |
| |
| delete [] lengths; |
| FreeFileData(shaderStrings); |
| |
| if (ret == 0) |
| CompileFailed = true; |
| } |
| |
| // |
| // print usage to stdout |
| // |
| void usage() |
| { |
| printf("Usage: glslangValidator [option]... [file]...\n" |
| "\n" |
| "Where: each 'file' ends in .<stage>, where <stage> is one of\n" |
| " .conf to provide an optional config file that replaces the default configuration\n" |
| " (see -c option below for generating a template)\n" |
| " .vert for a vertex shader\n" |
| " .tesc for a tessellation control shader\n" |
| " .tese for a tessellation evaluation shader\n" |
| " .geom for a geometry shader\n" |
| " .frag for a fragment shader\n" |
| " .comp for a compute shader\n" |
| "\n" |
| "Compilation warnings and errors will be printed to stdout.\n" |
| "\n" |
| "To get other information, use one of the following options:\n" |
| "Each option must be specified separately.\n" |
| " -V create SPIR-V binary, under Vulkan semantics; turns on -l;\n" |
| " default file name is <stage>.spv (-o overrides this)\n" |
| " (unless -o is specified, which overrides the default file name)\n" |
| " -G create SPIR-V binary, under OpenGL semantics; turns on -l;\n" |
| " default file name is <stage>.spv (-o overrides this)\n" |
| " -H print human readable form of SPIR-V; turns on -V\n" |
| " -E print pre-processed GLSL; cannot be used with -l;\n" |
| " errors will appear on stderr.\n" |
| " -c configuration dump;\n" |
| " creates the default configuration file (redirect to a .conf file)\n" |
| " -d default to desktop (#version 110) when there is no shader #version\n" |
| " (default is ES version 100)\n" |
| " -h print this usage message\n" |
| " -i intermediate tree (glslang AST) is printed out\n" |
| " -l link all input files together to form a single module\n" |
| " -m memory leak mode\n" |
| " -o <file> save binary into <file>, requires a binary option (e.g., -V)\n" |
| " -q dump reflection query database\n" |
| " -r relaxed semantic error-checking mode\n" |
| " -s silent mode\n" |
| " -t multi-threaded mode\n" |
| " -v print version strings\n" |
| " -w suppress warnings (except as required by #extension : warn)\n" |
| ); |
| |
| exit(EFailUsage); |
| } |
| |
| #if !defined _MSC_VER && !defined MINGW_HAS_SECURE_API |
| |
| #include <errno.h> |
| |
| int fopen_s( |
| FILE** pFile, |
| const char* filename, |
| const char* mode |
| ) |
| { |
| if (!pFile || !filename || !mode) { |
| return EINVAL; |
| } |
| |
| FILE* f = fopen(filename, mode); |
| if (! f) { |
| if (errno != 0) { |
| return errno; |
| } else { |
| return ENOENT; |
| } |
| } |
| *pFile = f; |
| |
| return 0; |
| } |
| |
| #endif |
| |
| // |
| // Malloc a string of sufficient size and read a string into it. |
| // |
| char** ReadFileData(const char* fileName) |
| { |
| FILE *in = nullptr; |
| int errorCode = fopen_s(&in, fileName, "r"); |
| |
| int count = 0; |
| const int maxSourceStrings = 5; // for testing splitting shader/tokens across multiple strings |
| char** return_data = (char**)malloc(sizeof(char *) * (maxSourceStrings+1)); // freed in FreeFileData() |
| |
| if (errorCode || in == nullptr) |
| Error("unable to open input file"); |
| |
| while (fgetc(in) != EOF) |
| count++; |
| |
| fseek(in, 0, SEEK_SET); |
| |
| char *fdata = (char*)malloc(count+2); // freed before return of this function |
| if (! fdata) |
| Error("can't allocate memory"); |
| |
| if ((int)fread(fdata, 1, count, in) != count) { |
| free(fdata); |
| Error("can't read input file"); |
| } |
| |
| fdata[count] = '\0'; |
| fclose(in); |
| |
| if (count == 0) { |
| // recover from empty file |
| return_data[0] = (char*)malloc(count+2); // freed in FreeFileData() |
| return_data[0][0]='\0'; |
| NumShaderStrings = 0; |
| free(fdata); |
| |
| return return_data; |
| } else |
| NumShaderStrings = 1; // Set to larger than 1 for testing multiple strings |
| |
| // compute how to split up the file into multiple strings, for testing multiple strings |
| int len = (int)(ceil)((float)count/(float)NumShaderStrings); |
| int ptr_len = 0; |
| int i = 0; |
| while (count > 0) { |
| return_data[i] = (char*)malloc(len + 2); // freed in FreeFileData() |
| memcpy(return_data[i], fdata + ptr_len, len); |
| return_data[i][len] = '\0'; |
| count -= len; |
| ptr_len += len; |
| if (count < len) { |
| if (count == 0) { |
| NumShaderStrings = i + 1; |
| break; |
| } |
| len = count; |
| } |
| ++i; |
| } |
| |
| free(fdata); |
| |
| return return_data; |
| } |
| |
| void FreeFileData(char** data) |
| { |
| for(int i = 0; i < NumShaderStrings; i++) |
| free(data[i]); |
| |
| free(data); |
| } |
| |
| void InfoLogMsg(const char* msg, const char* name, const int num) |
| { |
| if (num >= 0 ) |
| printf("#### %s %s %d INFO LOG ####\n", msg, name, num); |
| else |
| printf("#### %s %s INFO LOG ####\n", msg, name); |
| } |