blob: 2b5531452181b62a8ecc059cba2c24252bedec4d [file] [log] [blame]
1998-03-21 Theodore Ts'o <tytso@rsts-11.mit.edu>
* mke2fs.c (check_plausibility): Fixed spelling typo in warning
message. Fixed up -Wall warnings in file.
Sun Mar 8 22:21:48 1998 Theodore Ts'o <tytso@rsts-11.mit.edu>
* partinfo.c (main): The ioctl BLKGETSIZE requires a long, not an
int.
Sun Feb 1 16:53:36 1998 Theodore Ts'o <tytso@rsts-11.mit.edu>
* badblocks.8: Update documentation to note that output format
of badblocks is suitable for use with e2fsck -l or
mke2fs -l.
* mke2fs.c (handle_bad_blocks): Fix bug so that all groups with
bad superblock backup blocks are printed (not just the
first one).
Mon Dec 1 17:01:04 1997 Theodore Ts'o <tytso@rsts-11.mit.edu>
* badblocks.8.in: Add documentation for the -s option.
Fri Oct 24 23:37:52 1997 Theodore Ts'o <tytso@rsts-11.mit.edu>
* fsck.c:
* chattr.c: Remove #include of getopt.h, since it's not needed.
* tune2fs.c (main):
* lsattr.c (main):
* badblocks.c (main):
* dumpe2fs.c (main):
* mke2fs.c (PRS): Make the variable which getopt returns into be
an int, so that it won't lose on platforms where char is
unsigned.
Fri Oct 3 13:38:45 1997 Theodore Ts'o <tytso@rsts-11.mit.edu>
* mke2fs.c (parse_raid_opts): Make parse_raid_opts return a void,
to fix a -Wall warning.
Mon Sep 15 22:07:12 1997 Theodore Ts'o <tytso@rsts-11.mit.edu>
* tune2fs.c (main):
* mklost+found.c (main):
* lsattr.c (main):
* dumpe2fs.c (main):
* chattr.c (main):
* badblocks.c (main): Declare main to return an int, as required.
Make sure main always ends with an exit(0). (Some
programs weren't doing this, and thus were returning a
random exit value.)
Mon Jul 14 15:27:29 1997 Theodore Y. Ts'o <tytso@mit.edu>
* e2label.c: New file contributed by Andries Brouwer which
provides an easy-to-use interface to modify the filesystem
label.
* Makefile.in (SPROGS): Add Makefile support to build e2label
Tue Jun 17 01:33:20 1997 Theodore Ts'o <tytso@rsts-11.mit.edu>
* Release of E2fsprogs 1.11
Mon Jun 16 23:37:54 1997 Theodore Ts'o <tytso@rsts-11.mit.edu>
* mke2fs.c (show_stats): Adjust the number of columns printed when
displaying the superblock backups to avoid running over
80 columns when making a really big disk.
Thu May 8 22:22:08 1997 Theodore Ts'o <tytso@rsts-11.mit.edu>
* badblocks.8.in, chattr.1.in, dumpe2fs.8.in, fsck.8.in,
mke2fs.8.in, tune2fs.8.in: Fix minor typos and grammer
oops found by Bill Hawes (whawes@star.net).
* mke2fs.c (test_disk): Pass the blocksize to the bad blocks
command so that all of the filesystem gets tested in the
case where the blocksize 2048 or 4096.
Thu Apr 24 12:16:42 1997 Theodre Ts'o <tytso@localhost.mit.edu>
* Release of E2fsprogs version 1.10
Thu Apr 24 09:52:47 1997 Theodre Ts'o <tytso@localhost.mit.edu>
* mke2fs.c: Added new option -R, which specifies RAID options.
Currently the only supported RAID option is "stride" which
specifies the stripe width in RAID filesystem. This is
used to aid in the placement of the inode and block
bitmaps.
* mke2fs.8.in, tune2fs.8.in: Added warnings that the sparse
superblock option isn't yet supported by most kernels.
Wed Apr 23 22:42:51 1997 Theodre Ts'o <tytso@localhost.mit.edu>
* mke2fs.c (PRS): Make the default filesystem revision be 0, not
1. (Since some people are still worried about 1.2.13
compatibility).
Thu Apr 17 12:23:38 1997 Theodore Ts'o <tytso@rsts-11.mit.edu>
* Release of E2fsprogs version 1.09
Fri Apr 11 18:57:24 1997 Theodore Ts'o <tytso@rsts-11.mit.edu>
* chattr.1.in: Updated man page so that the 'A' attribute is
specified everywhere.
* chattr.c (usage): Added usage message for the 'A' attribute.
Fri Apr 11 18:56:26 1997 Theodore Ts'o <tytso@rsts-11.mit.edu>
* Release of E2fsprogs version 1.08
Thu Apr 10 07:08:03 1997 Theodore Ts'o <tytso@rsts-11.mit.edu>
* dumpe2fs.c (list_desc): List the offsets of the inode and block
bitmaps, and the inode table. List the block boundaries
for the groups.
Sat Apr 5 11:55:52 1997 Theodore Ts'o <tytso@rsts-11.mit.edu>
* tune2fs.c (main): Implement the -s flag allows the user to
set and reset the sparse superblock flag.
* mke2fs.c (PRS): By default generate DYNAMIC revision
filesystems. The -s flag controls whether or not the
sparse superblock flag is set.
(PRS): Change to allow the user to specify the true
maximum number of blocks per group to reflect the
blocksize.
Wed Mar 12 13:32:05 1997 Theodore Y. Ts'o <tytso@mit.edu>
* Release of E2fsprogs version 1.07
Thu Mar 6 17:15:05 1997 Theodore Ts'o <tytso@rsts-11.mit.edu>
* mke2fs.c (create_root_dir): Set the root directory's i_uid and
i_gid to be the real user and group id.
Tue Mar 4 10:14:33 1997 Theodore Ts'o <tytso@rsts-11.mit.edu>
* mke2fs.c (check_plausibility): Add more intelligent error
messages when the device doesn't exist.
Sat Mar 1 10:43:32 1997 Theodore Ts'o <tytso@rsts-11.mit.edu>
* fsck.c (main): Fix bug where the PATH environment variable isn't
set when it is unset.
Tue Jan 14 12:30:45 1997 Theodore Ts'o <tytso@rsts-11.mit.edu>
* mke2fs.c (write_inode_tables): Fixed bug in write_inode_tables
where a loop variable was getting reused in a nested loop.
This caused the inode table to not be correctly
initialized.
Thu Jan 2 00:00:37 1997 Theodore Ts'o <tytso@rsts-11.mit.edu>
* lsattr.c, chattr.c: Include string.h, since we use memcpy().
* findsuper.c: Use time_t for ctime(), not __u32.
Sat Dec 28 23:39:18 1996 Theodore Ts'o <tytso@rsts-11.mit.edu>
* badblocks.c: Adapted -vv modifications from Rik Faith so that
they frequently update the block number field.
* badblocks.8.in: Document the optional start-block parameter
Mon Oct 14 11:52:58 1996 Theodore Ts'o <tytso@rsts-11.mit.edu>
* mke2fs.c: Updated to use new ext2fs_allocate_tables() function.
Tue Oct 8 02:02:03 1996 Theodore Ts'o <tytso@rsts-11.mit.edu>
* Release of E2fsprogs version 1.06
Mon Oct 7 00:56:24 1996 Theodore Ts'o <tytso@rsts-11.mit.edu>
* chattr.1.in: Documented the 'A' (noatime) attribute.
* dumpe2fs.c (main): Change EXT2_SWAP to EXT2_FLAG_SWAP for
consistency's sake.
Sun Sep 22 16:18:47 1996 Theodore Ts'o <tytso@rsts-11.mit.edu>
* chattr.c (decode_arg): Add support for the 'A' (noatime) flag.
Thu Sep 12 15:23:07 1996 Theodore Ts'o <tytso@rsts-11.mit.edu>
* Release of E2fsprogs version 1.05
Sat Sep 7 07:34:11 1996 Theodore Ts'o <tytso@rsts-11.mit.edu>
* tune2fs.c (main): Add support for new option -C, which sets the
current number of mounts.
(main): Allow the interval to be specified in seconds,
mostly for debugging.
Tue Aug 27 17:27:43 1996 Miles Bader <miles@gnu.ai.mit.edu>
* Makefile.in (SMANPAGES): Use @FSCK_MAN@ instead of fsck.8.
(SPROGS): Use @FSCK_PROG@ instead of fsck.
Thu Aug 22 00:51:44 1996 Theodore Ts'o <tytso@rsts-11.mit.edu>
* mke2fs.c (zap_bootblock): Don't do zap_bootblock on a
sparc.
Tue Aug 20 00:15:46 1996 Theodore Ts'o <tytso@rsts-11.mit.edu>
* chattr.c (main): Fixed bug so that chattr -v works. (Bug report
and fix sent by Charles Howes, chowes@eznet.ca)
Fri Aug 9 11:52:42 1996 Theodore Ts'o <tytso@rsts-11.mit.edu>
* tune2fs.8.in:
* tune2fs.c: Added support for the -L option which sets the volume
label, the -M option which sets the last mounted
directory, and the -U option which sets the filesystem UUID.
* mke2fs.8.in:
* mke2fs.c: Added support for the -o option, which overrides the
creator OS. Generate a UUID for the filesystem, if
applicable. Added support for the -L option which sets
the volume label, and the -M option which sets the last
mounted directory.
Sat Jun 22 17:43:17 1996 Remy Card <card@bbj.linux.eu.org>
* chattr.c (decode_arg): Integrated Michael Nonweiler's fix to
avoid a segmentation fault when the "-v" option is used
and no version number is specified.
Thu May 16 11:12:30 1996 Theodore Ts'o <tytso@rsts-11.mit.edu>
* Release of E2fsprogs version 1.04
Wed May 15 21:15:43 1996 Theodore Ts'o <tytso@rsts-11.mit.edu>
* Makefile.in (fsck): fsck doesn't need to be linked with the ext2
libraries.
Wed Mar 27 00:33:40 1996 <tytso@rsts-11.mit.edu>
* Release of E2fsprogs version 1.03
Thu Mar 7 03:43:20 1996 <tytso@rsts-11.mit.edu>
* mke2fs.c (PRS): Add (for development only) support to
specify revision and inode size of the new filesystem.
Tue Mar 5 03:51:35 1996 <tytso@rsts-11.mit.edu>
* mke2fs.8.in: Fix a few minor typo's in the man page.
* mke2fs.c (reserve_inodes): Add support for dynamic first inode
revision.
Mon Feb 5 22:19:49 1996 <tytso@rsts-11.mit.edu>
* fsck.c (check_all, PRS): Added new flag -P, which turns on the
parallel root option. This allows you to check the root
filesystem in parallel with the other filesystems. Note
that this is not the safest thing in the world to do,
since if the root filesystem is in doubt things like
the e2fsck executable might be corrupted! But some
sysadmins, who don't want to repartition the root
filesystem to be small and compact, may really want this
option turned on.
Wed Jan 31 11:06:08 1996 <tytso@rsts-11.mit.edu>
* Release of E2fsprogs version 1.02
Tue Oct 30 21:14:12 1995 <tytso@rsts-11.mit.edu>
* mke2fs.c (check_plausibility): Add check to warn user if they
are trying to mke2fs the whole disk. (/dev/hda
vs. /dev/hda1)
Fri Dec 15 19:09:56 1995 <tytso@rsts-11.mit.edu>
* fsck.c (check_all): If we break out of the loop because we are
serializing and have just started at fsck we haven't
finished the pass. We need to go round again in case there
are more filesystems to be done in this pass. (Patch
submitted by Mike Jagdis)
Sat Dec 9 10:07:16 1995 <tytso@rsts-11.mit.edu>
* dumpe2fs.c (in_use): test_bit() was renamed to
ext2fs_test_bit().
Mon Oct 30 20:21:18 1995 <tytso@rsts-11.mit.edu>
* fsck.c (fsck_device): Check fstype instead of type; this was a
stupid typo which caused coredumps in some cases.
Thu Oct 26 12:05:18 1995 <tytso@rsts-11.mit.edu>
* Makefile.in (install): Strip programs when they are installed.
Fri Aug 18 15:10:40 1995 Theodore Y. Ts'o <tytso@dcl>
* mke2fs.c (PRS): Move call of check_mount() from main() to PRS(),
so we do the check to see if the filesystem is mounted
*before* we try to determine the size of the device.
Wed Sep 6 23:34:07 1995 Remy Card <card@bbj>
* fsck.c (load_fs_info): Load the informations from /etc/fstab in
the same order.
Thu Aug 17 22:33:09 1995 <tytso@rsts-11.mit.edu>
* mke2fs.c (check_mount): Use the new ext2fs_check_if_mounted()
function to determine if the device is mounted.
* mke2fs.c (PRS): Change call to use the new
ext2fs_get_device_size() function in order to determine
the size of the filesystem. Remove get_size() and
is_valid_offset(), which are no longer called.
Fri Aug 11 08:26:24 1995 Theodore Y. Ts'o <tytso@lurch.mit.edu>
* fsck.c (fsck_device): Make sure fstype has been set by the user
and that it does not begin with "no" and the user has
specified exactly one type before using it as the type to
check.
Fri Aug 11 14:17:18 1995 Remy Card <card@bbj>
* badblocks.8:
* chattr.1:
* dumpe2fs.8:
* fsck.8:
* lsattr.1:
* mke2fs.8:
* mklost+found.8:
* tune2fs.8: Updated date and version number.
Thu Aug 10 14:18:36 1995 Remy Card <card@bbj>
* tune2fs.c: Fixed a bug which prevented the use of user and group
names with the -g and -u options. Thanks to Jean Christophe
ANDRE <progfou@mycrob.cafard.freenix.fr>.
* mke2fs.8:
* tune2fs.8: Fixed a spelling error in Ted's name :-)
Wed Aug 9 20:41:54 1995 Theodore Y. Ts'o <tytso@dcl>
* mke2fs.c (count_blocks): Divide the size by
EXT2_BLOCK_SIZE(&param), instead of assuming that the
blocksize is always 1024 bytes.
Sat Aug 5 12:00:51 1995 Theodore Y. Ts'o <tytso@lurch.mit.edu>
* mke2fs.c (PRS): Use malloc() instead of alloca() --- alloca() is
not portable!! In any case putenv() in some systems must
take a static character array or malloc()'ed memory;
passing memory allocated using alloca() to putenv() is not
advisable.
* chattr.c (chattr_dir_proc):
* lsattr.c (lsattr_dir_proc): Use malloc() instead of alloca() ---
alloca is not portable!
* fsck.c (fsck_device): If the filesystem type is specified by the
user using the -t option, let it override the type in
/etc/fstab.
* fsck.c (strdup): Don't build strdup() if the system defines it.
Mon Jun 12 19:15:10 1995 Theodore Y. Ts'o (tytso@dcl)
* chattr.c, lsattr.c: Include <sys/types.h> for <dirent.h>'s
benefit.
* The $(UPROGS) go in bin, not sbin.
* badblocks.c, chattr.c, dumpe2fs.c, fsck.c, lsattr.c, mke2fs.c,
tune2fs.c: Don't include <getopt.h> if it doesn't exist.
Mon Jun 12 16:36:04 1995 Theodore Y. Ts'o <tytso@dcl>
* badblocks.c, chattr.c, dumpe2fs.c, fsck.c, lsattr.c, mke2fs.c,
tune2fs.c: Only include getopt.h if HAVE_GETOPT_H is defined.
Sat Jun 10 23:37:09 1995 Theodore Y. Ts'o <tytso@lurch.mit.edu>
* chattr.c: Include errno.h, since we use errno
* fsck.c (load_fs_info): If HAVE_MNTENT_H is not defined,
explicitly initialize filesys_info to be NULL.
* mke2fs.c: Include the stdio.h and errno.h header files
Thu Jun 8 13:25:23 1995 Miles Bader <miles@churchy.gnu.ai.mit.edu>
* mke2fs.c: Only include <linux/fs.h> if we can.
(get_size): Don't try to use the BLKGETSIZE ioctl unless it's defined.
(check_mount): Only check to see if the device is mounted if
HAVE_MNTENT_H is defined (by configure).
* fsck.c (load_fs_info): Only try to get info about filesystems if
HAVE_MNTENT_H is defined (by configure).
(main): Allocate space for a new fsck_path instead of append to a
statically sized buffer.
(PRS): Use alloca to allocate the new path string, instead of
having a fixed size buffer (which was the wrong size anyway).
* chattr.c (chattr_dir_proc): Use alloca to allocate space for a
filename instead of using a fixed-size buffer.
* lsattr.c (lsattr_dir_proc): Ditto.
* mklost+fond.c (main): Calculate the actual needed size for the
path buffer instead of using MAXPATHLEN (which not all systems have).
* badblocks.c: Only include linux include files if we have them.
(flush_bufs): New function to flush a block device, optionally
syncing it first. This replaces other copies of this code.
(test_ro): Replace calls to ioctl with flush_bufs().
(test_rw): Ditto.
* Makefile.in: Rewritten to conform to GNU coding standards and
support separate compilation directories.
Sat Mar 11 10:59:58 1995 Theodore Y. Ts'o <tytso@localhost>
* mke2fs.c (main, zap_bootblock): Added new function
zap_bootblock() which clears the first 512 bytes of the
filesystem. This protects the filesystem from being
misidentified as a MS-DOS FAT filesystem.
* badblocks.c (alarm_intr, test_ro, test_rw): Increase the space
allocated for printing the block numbers, so that the
display doesn't get corrupted when running badblocks on a
very large partition.
* badblocks.c (do_test, test_ro, test_rw): Added missing cast to
ext2_loff_t, so that when checking a large device,
spurious seek errors aren't reported.
* mke2fs.c (count_blocks): Declare mid to be of type ext2_loff_t
instead of type int, so that it works for filesystems
greater than 2 GB. (Fortunately count_blocks is only
called if the device does not support the BLKGETSIZE
ioctl, which most do.)
* fsck.c (ignore): Add check to ignore filesystems with a pass
number of zero. (This check was accidentally deleted at
during 0.5b development.)
Sat Dec 31 00:47:16 1994 <tytso@rsx-11.mit.edu>
* mke2fs.c (new_table_block, alloc_tables, PRS, main): Add a new
option, -S, which only writes the superblock and group
descriptors. Useful for recovering when all of the
superblocks are corrupted somehow (as a last ditch
measure).
Also, don't bother initializing the bitmap blocks in
alloc_tables(), since they will be overwritten at the end
anyway. (Should speed up mke2fs by a little.)
Tue Dec 6 02:20:55 1994 <tytso@rsx-11.mit.edu>
* fsck.c (main): Fix stupid typo where a null inst would be freed.
* fsck.c (wait_one): Check WIFEXITED on status before trying to
extract the exit status. In other cases, return
FSCK_ERROR if the back end processor exited with a signal.
Tue Nov 15 10:20:00 1994 Remy Card <card@bbj>
* tune2fs.c (main): Fixed a bug which prevented the use of the
new options.
Added the `w' (week) suffix recognition in the check interval.
Sun Nov 13 15:58:48 1994 (tytso@rsx-11)
* fsck.c (load_fs_info): If the user has an obviously old
/etc/fstab file, issue a warning message and assume that
all partitions should be checked.
Sat Nov 12 00:33:18 1994 (tytso@rsx-11)
* dumpe2fs.c (list_desc): Update to new inode and block bitmap
structures.
* mke2fs.c (create_root_dir): Create the root directory owned by
the effective uid.
Mon Nov 7 22:04:37 1994 Remy Card <card@bbj>
* tune2fs.c (main.c): Added support for new options:
-r reserved_blocks_count, -g reserved_gid, -u reserved_uid.
Sun Aug 21 00:57:33 1994 Theodore Y. Ts'o (tytso@rt-11)
* fsck.c (ignore): If the pass number is 0, ignore the filesystem.
Wed Aug 17 21:55:03 1994 Remy Card (card@bbj)
* badblocks.c (test_rw): Added verbose output like in the
read-only test.
(do_test and test_rw): Use the llseek system call if available.
* chattr.c: Added support for new attributes.
* lsattr.c: Added support for long format.
* mke2fs.c (usage): Fixed bogus usage message.
(valid_offset): Use the llseek system call if available.
Wed Aug 17 10:50:57 1994 Theodore Y. Ts'o (tytso@rt-11)
* mke2fs.c (handle_bad_blocks): Check to see if a bad block is
where a backup superblock/group descriptor is stored. If so,
print a warning message and adjust the superblock counts so that
they are correct. (Otherwise, the bad block will get counted
twice and the # of free blocks count will be wrong.)
(alloc_tables): Removed code which calcualated the free block
statistics, which was moved to lib/ext2fs/initialize.c. This
allows the bad block code to adjust the group descriptor
statistics if necessary.